; -------------------------------------------------------------------------------- ; @Title: FT32F0 On-Chip Peripherals ; @Props: Released ; @Author: NEJ ; @Changelog: 2024-08-16 NEJ ; @Manufacturer: FMD - Fremont Micro Devices Corporation ; @Doc: Generated (TRACE32, build: 171804.), based on: ; FT32F0xx.svd (Ver. 1.0), FT32F0xB.svd (Ver. 1.0), ; FT32F072x.svd (Ver. 1.0) ; @Core: Cortex-M0 ; @Chip: FT32F030C8, FT32F030CB, FT32F030F6, FT32F030G8, FT32F030GB, ; FT32F030K6, FT32F030K8, FT32F030KB, FT32F030R8, FT32F030RB, ; FT32F072C8, FT32F072CB, FT32F072K6, FT32F072KB, FT32F072R8, ; FT32F072RB ; @Copyright: (C) 1989-2024 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: perft32f0.per 18244 2024-08-19 11:33:28Z kwisniewski $ AUTOINDENT.ON CENTER TREE ENUMDELIMITER "," base ad:0x0 tree.close "Core Registers (Cortex-M0)" AUTOINDENT.PUSH AUTOINDENT.OFF tree "System Control" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 0x8 if (CORENAME()=="CORTEXM1") group.long 0x10++0x0b line.long 0x00 "STCSR,SysTick Control and Status Register" bitfld.long 0x00 16. " COUNTFLAG ,Returns 1 if timer counted to 0" "0,1" bitfld.long 0x00 2. " CLKSOURCE ,Always reads as one" "No effect,Processor clock" textline " " bitfld.long 0x00 1. " TICKINT ,Counting down to 0 " "No SysTick,SysTick" bitfld.long 0x00 0. " ENABLE ,Counter enable" "Disabled,Enabled" line.long 0x04 "STRVR,SysTick Reload Value Register" hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD ,Value to load into the STCVR when the counter reaches 0" line.long 0x08 "STCVR,SysTick Current Value Register" hexmask.long.tbyte 0x08 0.--23. 1. " CURRENT ,Reads return the current value of the SysTick counter" else group.long 0x10++0x0b line.long 0x00 "STCSR,SysTick Control and Status Register" bitfld.long 0x00 16. " COUNTFLAG ,Returns 1 if timer counted to 0" "0,1" bitfld.long 0x00 2. " CLKSOURCE ,Always reads as one" "External clock,Processor clock" textline " " bitfld.long 0x00 1. " TICKINT ,Counting down to 0 " "No SysTick,SysTick" bitfld.long 0x00 0. " ENABLE ,Counter enable" "Disabled,Enabled" line.long 0x04 "STRVR,SysTick Reload Value Register" hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD ,Value to load into the STCVR when the counter reaches 0" line.long 0x08 "STCVR,SysTick Current Value Register" hexmask.long.tbyte 0x08 0.--23. 1. " CURRENT ,Reads return the current value of the SysTick counter" endif if (CORENAME()=="CORTEXM1") rgroup.long 0x1c++0x03 line.long 0x00 "STCR,SysTick Calibration Value Register" bitfld.long 0x00 31. " NOREF ,Reads as one" "0,1" bitfld.long 0x00 30. " SKEW ,Reads as zero" "0,1" textline " " hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Indicates calibration value is not known" else rgroup.long 0x1c++0x03 line.long 0x00 "STCR,SysTick Calibration Value Register" bitfld.long 0x00 31. " NOREF ,Indicates whether the IMPL_DEF reference clock is provided" "Implemented,Not implemented" bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact" textline " " hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing subject to system clock skew errors" endif if (CORENAME()=="CORTEXM1") rgroup.long 0xd00++0x03 line.long 0x00 "CPUID,CPU ID Base Register" abitfld.long 0x00 24.--31. " IMPLEMENTER ,Implementer code that Arm has assigned" "0x41=Arm Limited" bitfld.long 0x00 20.--23. " VARIANT ,Variant number to distinguish between different product variants or major revisions of the product" "r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r13,r14,r15" textline " " bitfld.long 0x00 16.--19. " ARCHITECTURE ,Indicates the architecture version" "0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,ARMv6-M,0xD,0xE,0xF" textline " " abitfld.long 0x00 4.--15. " PARTNO ,Indicates part number" "0xC21=Cortex-M1" bitfld.long 0x00 0.--3. " REVISION ,Revision number to distinguish between different patches of the product" "p0,p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15" elif (CORENAME()=="CORTEXM0+") rgroup.long 0xd00++0x03 line.long 0x00 "CPUID,CPU ID Base Register" abitfld.long 0x00 24.--31. " IMPLEMENTER ,Implementer code that Arm has assigned" "0x41=Arm Limited" bitfld.long 0x00 20.--23. " VARIANT ,Variant number to distinguish between different product variants or major revisions of the product" "r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r13,r14,r15" textline " " bitfld.long 0x00 16.--19. " ARCHITECTURE ,Indicates the architecture version" "0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,ARMv6-M,0xD,0xE,0xF" textline " " abitfld.long 0x00 4.--15. " PARTNO ,Indicates part number" "0xC60=Cortex-M0+" bitfld.long 0x00 0.--3. " REVISION ,Revision number to distinguish between different patches of the product" "p0,p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15" else rgroup.long 0xd00++0x03 line.long 0x00 "CPUID,CPU ID Base Register" abitfld.long 0x00 24.--31. " IMPLEMENTER ,Implementer code that Arm has assigned" "0x41=Arm Limited" bitfld.long 0x00 20.--23. " VARIANT ,Variant number to distinguish between different product variants or major revisions of the product" "r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,r13,r14,r15" textline " " bitfld.long 0x00 16.--19. " ARCHITECTURE ,Indicates the architecture version" "0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,ARMv6-M,0xD,0xE,0xF" textline " " abitfld.long 0x00 4.--15. " PARTNO ,Indicates part number" "0xC20=Cortex-M0" bitfld.long 0x00 0.--3. " REVISION ,Revision number to distinguish between different patches of the product" "p0,p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12,p13,p14,p15" endif group.long 0xd04++0x03 line.long 0x00 "ICSR,Interrupt Control State Register" bitfld.long 0x00 31. " NMIPENDSET ,Setting this bit will activate an NMI" "No effect,Set pending" bitfld.long 0x00 28. " PENDSVSET ,Set a pending PendSV interrupt" "No effect,Set pending" textline " " bitfld.long 0x00 27. " PENDSVCLR ,Clear a pending PendSV interrupt" "No effect,Clear pending" bitfld.long 0x00 26. " PENDSTSET ,Set a pending SysTick" "No effect,Set pending" textline " " bitfld.long 0x00 25. " PENDSVCLR ,Clear a pending SysTick" "No effect,Clear pending" bitfld.long 0x00 23. " ISRPREEMPT ,Pending exception service" "No service,Service" textline " " bitfld.long 0x00 22. " ISRPENDING ,External interrupt pending flag" "No interrupt,Interrupt" hexmask.long.byte 0x00 12.--17. 1. " VECTPENDING ,Active exception number field" textline " " hexmask.long.byte 0x00 0.--5. 1. " VECTACTIVET ,Active exception number field" if (CORENAME()=="CORTEXM0+") group.long 0xd08++0x03 line.long 0x00 "VTOR,Vector Table Offset Register" hexmask.long 0x00 7.--31. 0x80 " TBLOFF ,Vector table address" else textline " " endif group.long 0xd0c++0x03 line.long 0x00 "AIRCR,Application Interrupt and Reset Control Register" hexmask.long.word 0x00 16.--31. 1. " VECTKEY ,Vector Key" bitfld.long 0x00 15. " ENDIANNESS ,Data endianness bit" "Little-endian,Big-endian" textline " " bitfld.long 0x00 2. " SYSRESETREQ ,System reset setup request" "No effect,Reset" bitfld.long 0x00 1. " VECTCLRACTIVE ,Clears all active state information" "No clear,Clear" group.long 0xd10++0x03 line.long 0x00 "SCR,System Control Register" bitfld.long 0x00 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup" bitfld.long 0x00 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep" textline " " bitfld.long 0x00 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled" rgroup.long 0xd14++0x03 line.long 0x00 "CCR,Configuration and Control Register" bitfld.long 0x00 9. " STKALIGN ,Indicates whether on exception entry all exceptions are entered with 8-byte stack alignment and the context to restore it is saved" "Reserved,Aligned" bitfld.long 0x00 3. " UNALIGN_TRP ,Indicates that all unaligned accesses results in a Hard Fault" "Reserved,Trapped" group.long 0xd1c++0x0b line.long 0x00 "SHPR2,System Handler Priority Register 2" bitfld.long 0x00 30.--31. " PRI_11 ,Priority of system handler 11-SVCall" "00,01,10,11" line.long 0x04 "SHPR3,System Handler Priority Register 3" bitfld.long 0x04 30.--31. " PRI_15 ,Priority of system handler 15-SysTick" "00,01,10,11" bitfld.long 0x04 22.--23. " PRI_14 ,Priority of system handler 14- PendSV" "00,01,10,11" line.long 0x08 "SHCSR,System Handler Control and State Register" bitfld.long 0x08 15. " SVCALLPENDED ,Reads as 1 if SVCall is pending" "Not pending,Pending" if (CORENAME()=="CORTEXM0+") hgroup.long 0x08++0x03 hide.long 0x00 "ACTLR,Auxiliary Control Register" else textline " " endif else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Nested Vectored Interrupt Controller (NVIC)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 12. tree "Interrupt Enable Registers" group.long 0x100++0x03 line.long 0x00 "SET/CLREN,Interrupt Set/Clear Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" tree.end tree "Interrupt Pending Registers" group.long 0x200++0x03 line.long 0x00 "SET/CLRPEN,Interrupt Set/Clear Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" tree.end width 6. tree "Interrupt Priority Registers" group.long 0x400++0x1F line.long 0x00 "INT0,Interrupt Priority Register" bitfld.long 0x00 30.--31. " IP_3 ,Priority of interrupt 3" "0,1,2,3" bitfld.long 0x00 22.--23. " IP_2 ,Priority of interrupt 2" "0,1,2,3" bitfld.long 0x00 14.--15. " IP_1 ,Priority of interrupt 1" "0,1,2,3" bitfld.long 0x00 6.--7. " IP_0 ,Priority of interrupt 0" "0,1,2,3" line.long 0x04 "INT1,Interrupt Priority Register" bitfld.long 0x04 30.--31. " IP_7 ,Priority of interrupt 7" "0,1,2,3" bitfld.long 0x04 22.--23. " IP_6 ,Priority of interrupt 6" "0,1,2,3" bitfld.long 0x04 14.--15. " IP_5 ,Priority of interrupt 5" "0,1,2,3" bitfld.long 0x04 6.--7. " IP_4 ,Priority of interrupt 4" "0,1,2,3" line.long 0x08 "INT2,Interrupt Priority Register" bitfld.long 0x08 30.--31. " IP_11 ,Priority of interrupt 11" "0,1,2,3" bitfld.long 0x08 22.--23. " IP_10 ,Priority of interrupt 10" "0,1,2,3" bitfld.long 0x08 14.--15. " IP_9 ,Priority of interrupt 9" "0,1,2,3" bitfld.long 0x08 6.--7. " IP_8 ,Priority of interrupt 8" "0,1,2,3" line.long 0x0C "INT3,Interrupt Priority Register" bitfld.long 0x0C 30.--31. " IP_15 ,Priority of interrupt 15" "0,1,2,3" bitfld.long 0x0C 22.--23. " IP_14 ,Priority of interrupt 14" "0,1,2,3" bitfld.long 0x0C 14.--15. " IP_13 ,Priority of interrupt 13" "0,1,2,3" bitfld.long 0x0C 6.--7. " IP_12 ,Priority of interrupt 12" "0,1,2,3" line.long 0x10 "INT4,Interrupt Priority Register" bitfld.long 0x10 30.--31. " IP_19 ,Priority of interrupt 19" "0,1,2,3" bitfld.long 0x10 22.--23. " IP_18 ,Priority of interrupt 18" "0,1,2,3" bitfld.long 0x10 14.--15. " IP_17 ,Priority of interrupt 17" "0,1,2,3" bitfld.long 0x10 6.--7. " IP_16 ,Priority of interrupt 16" "0,1,2,3" line.long 0x14 "INT5,Interrupt Priority Register" bitfld.long 0x14 30.--31. " IP_23 ,Priority of interrupt 23" "0,1,2,3" bitfld.long 0x14 22.--23. " IP_22 ,Priority of interrupt 22" "0,1,2,3" bitfld.long 0x14 14.--15. " IP_21 ,Priority of interrupt 21" "0,1,2,3" bitfld.long 0x14 6.--7. " IP_20 ,Priority of interrupt 20" "0,1,2,3" line.long 0x18 "INT6,Interrupt Priority Register" bitfld.long 0x18 30.--31. " IP_27 ,Priority of interrupt 27" "0,1,2,3" bitfld.long 0x18 22.--23. " IP_26 ,Priority of interrupt 26" "0,1,2,3" bitfld.long 0x18 14.--15. " IP_25 ,Priority of interrupt 25" "0,1,2,3" bitfld.long 0x18 6.--7. " IP_24 ,Priority of interrupt 24" "0,1,2,3" line.long 0x1C "INT7,Interrupt Priority Register" bitfld.long 0x1C 30.--31. " IP_31 ,Priority of interrupt 31" "0,1,2,3" bitfld.long 0x1C 22.--23. " IP_30 ,Priority of interrupt 30" "0,1,2,3" bitfld.long 0x1C 14.--15. " IP_29 ,Priority of interrupt 29" "0,1,2,3" bitfld.long 0x1C 6.--7. " IP_28 ,Priority of interrupt 28" "0,1,2,3" tree.end width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Debug" tree "Core Debug" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 0xA group.long 0xD30++0x03 line.long 0x00 "DFSR,Data Fault Status Register" eventfld.long 0x00 4. " EXTERNAL ,External debug request flag" "No occurred,Occurred" eventfld.long 0x00 3. " VCATCH ,Vector catch flag" "No occurred,Occurred" textline " " eventfld.long 0x00 2. " DWTRAP ,Data Watchpoint flag" "No match,Match" textline " " eventfld.long 0x00 1. " BKPT ,BKPT flag" "No match,Match" eventfld.long 0x00 0. " HALTED ,Halt request flag" "No request,Request" if (CORENAME()=="CORTEXM1") if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDF0))&0x01)==0x00) group.long 0xDF0++0x03 line.long 0x00 "DHCSR,Debug Halting Control and Status Register" bitfld.long 0x00 31. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 30. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 29. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 28. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 27. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 26. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset" bitfld.long 0x00 24. " S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not completed,Completed" textline " " bitfld.long 0x00 23. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 22. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 21. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 20. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 19. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 18. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 17. " S_HALT/DBGKEY ,Core Halted Status/Debug Key" "Not halted,Halted" bitfld.long 0x00 16. " S_REGRDY/DBGKEY ,Register R/W on the Debug Core Register Selector/Debug Key" "Not available,Available" textline " " textline " " textfld " " bitfld.long 0x00 0. " C_DEBUGEN ,Debug Enable" "Disabled,Enabled" else group.long 0xDF0++0x03 line.long 0x00 "DHCSR,Debug Halting Control and Status Register" bitfld.long 0x00 31. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 30. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 29. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 28. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 27. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 26. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset" bitfld.long 0x00 24. " S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not read,Read" textline " " bitfld.long 0x00 23. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 22. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 21. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 20. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 19. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 18. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 17. " S_HALT/DBGKEY ,Core Halted Status/Debug Key" "Not halted,Halted" bitfld.long 0x00 16. " S_REGRDY/DBGKEY ,Register R/W on the Debug Core Register Selector/Debug Key" "Not available,Available" textline " " bitfld.long 0x00 3. " C_MASKINTS ,Interrupts Mask" "Not masked,Masked" bitfld.long 0x00 2. " C_STEP ,Steps the core in halted debug" "Not halted,Halted" textline " " bitfld.long 0x00 1. " C_HALT ,Core Halted" "Not halted,Halted" bitfld.long 0x00 0. " C_DEBUGEN ,Debug Enable" "Disabled,Enabled" endif else if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDF0))&0x01)==0x00) group.long 0xDF0++0x03 line.long 0x00 "DHCSR,Debug Halting Control and Status Register" bitfld.long 0x00 31. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 30. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 29. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 28. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 27. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 26. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset" bitfld.long 0x00 24. " S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not completed,Completed" textline " " bitfld.long 0x00 23. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 22. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 21. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 20. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 19. " S_LOCKUP/DBGKEY ,Core Lockup Status/Debug Key" "Not locked up,Locked up" bitfld.long 0x00 18. " S_SLEEP/DBGKEY ,Core Sleep Status/Debug Key" "Not sleeping,Sleeping" textline " " bitfld.long 0x00 17. " S_HALT/DBGKEY ,Core Halted Status/Debug Key" "Not halted,Halted" bitfld.long 0x00 16. " S_REGRDY/DBGKEY ,Register R/W on the Debug Core Register Selector/Debug Key" "Not available,Available" textline " " textline " " textfld " " bitfld.long 0x00 0. " C_DEBUGEN ,Debug Enable" "Disabled,Enabled" else group.long 0xDF0++0x03 line.long 0x00 "DHCSR,Debug Halting Control and Status Register" bitfld.long 0x00 31. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 30. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 29. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 28. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 27. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 26. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset" bitfld.long 0x00 24. " S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not read,Read" textline " " bitfld.long 0x00 23. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 22. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 21. " DBGKEY ,Debug Key" "0,1" bitfld.long 0x00 20. " DBGKEY ,Debug Key" "0,1" textline " " bitfld.long 0x00 19. " S_LOCKUP/DBGKEY ,Core Lockup Status/Debug Key" "Not locked up,Locked up" bitfld.long 0x00 18. " S_SLEEP/DBGKEY ,Core Sleep Status/Debug Key" "Not sleeping,Sleeping" textline " " bitfld.long 0x00 17. " S_HALT/DBGKEY ,Core Halted Status/Debug Key" "Not halted,Halted" bitfld.long 0x00 16. " S_REGRDY/DBGKEY ,Register R/W on the Debug Core Register Selector/Debug Key" "Not available,Available" textline " " bitfld.long 0x00 3. " C_MASKINTS ,Interrupts Mask" "Not masked,Masked" bitfld.long 0x00 2. " C_STEP ,Steps the core in halted debug" "Not halted,Halted" textline " " bitfld.long 0x00 1. " C_HALT ,Core Halted" "Not halted,Halted" bitfld.long 0x00 0. " C_DEBUGEN ,Debug Enable" "Disabled,Enabled" endif endif wgroup.long 0xDF4++0x03 line.long 0x00 "DCRSR,Debug Core Selector Register" bitfld.long 0x00 16. " REGWnR ,Register Read/Write" "Read,Write" bitfld.long 0x00 0.--4. " REGSEL ,Register Selection" "R0,R1,R2,R3,R4,R5,R6,R7,R8,R9,R10,R11,R12,Current SP,LR,DebugReturnAddress,xPSR Flags,MSP,PSP,Reserved,CONTROL[1]/PRIMASK[0],?..." group.long 0xDF8++0x07 line.long 0x00 "DCRDR,Debug Core Register Data Register" hexmask.long 0x00 0.--31. 1. " DATA ,Data for reading and writing registers to and from the processor" line.long 0x04 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x04 24. " DWTENA ,Global enable or disable for the DW unit" "Disabled,Enabled" bitfld.long 0x04 10. " VC_HARDERR ,Debug trap on a Hard Fault" "No error,Error" textline " " bitfld.long 0x04 0. " VC_CORERESET ,Reset Vector Catch" "No reset,Reset" width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Breakpoint Unit (BPU)" sif COMPonent.AVAILABLE("BPU") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("BPU",-1)) width 8. group.long 0x00++0x03 line.long 0x00 "BP_CTRL,Breakpoint Control Register" bitfld.long 0x00 4.--7. " NUM_CODE1 ,Number of comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. " KEY ,Key field" "No write,Write" bitfld.long 0x00 0. " ENABLE ,Breakpoint unit enable bit" "Disabled,Enabled" group.long 0x8++0x03 line.long 0x00 "B_COMP0,Breakpoint Comparator Registers 0" bitfld.long 0x00 30.--31. " BP_MATCH ,Happens when the COMP address is matched" "No matching,Lower halfword,Upper halfword,Both halfwords" hexmask.long 0x00 2.--28. 2. " COMP ,Comparison address" bitfld.long 0x00 0. " ENABLE ,Compare enable for Breakpoint Comparator Register 0" "Disabled,Enabled" group.long 0xC++0x03 line.long 0x00 "B_COMP1,Breakpoint Comparator Registers 1" bitfld.long 0x00 30.--31. " BP_MATCH ,Happens when the COMP address is matched" "No matching,Lower halfword,Upper halfword,Both halfwords" hexmask.long 0x00 2.--28. 2. " COMP ,Comparison address" bitfld.long 0x00 0. " ENABLE ,Compare enable for Breakpoint Comparator Register 1" "Disabled,Enabled" group.long 0x10++0x03 line.long 0x00 "B_COMP2,Breakpoint Comparator Registers 2" bitfld.long 0x00 30.--31. " BP_MATCH ,Happens when the COMP address is matched" "No matching,Lower halfword,Upper halfword,Both halfwords" hexmask.long 0x00 2.--28. 2. " COMP ,Comparison address" bitfld.long 0x00 0. " ENABLE ,Compare enable for Breakpoint Comparator Register 2" "Disabled,Enabled" group.long 0x14++0x03 line.long 0x00 "B_COMP3,Breakpoint Comparator Registers 3" bitfld.long 0x00 30.--31. " BP_MATCH ,Happens when the COMP address is matched" "No matching,Lower halfword,Upper halfword,Both halfwords" hexmask.long 0x00 2.--28. 2. " COMP ,Comparison address" bitfld.long 0x00 0. " ENABLE ,Compare enable for Breakpoint Comparator Register 3" "Disabled,Enabled" else newline textline "BPU component base address not specified" newline endif tree.end tree "Data Watchpoint and Trace Unit (DWT)" sif COMPonent.AVAILABLE("DWT") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)) width 14. rgroup.long 0x00++0x03 line.long 0x00 "DW_CTRL,DW Control Register " bitfld.long 0x00 28.--31. " NUM_CODE1 ,Number of comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x1c++0x03 line.long 0x00 "DW_PCSR,DW Program Counter Sample Register" hexmask.long 0x00 0.--31. 1. " EIASAMPLE ,Execution instruction address sample or 0xFFFFFFFF" group.long 0x20++0x0b line.long 0x00 "DW_COMP0,DW Comparator Register 0" hexmask.long 0x00 0.--31. 1. " COMP1 ,Compare against PC or the data address" line.long 0x04 "DW_MASK0,DW Mask Register 0" hexmask.long.byte 0x04 0.--4. 1. " MASK ,Mask on data address when matching against COMP" line.long 0x08 "DW_FUNCTION0,DW Function Register 0" bitfld.long 0x08 24. " MATCHED ,Comparator match" "No match,Match" bitfld.long 0x08 0.--3. " FUNCTION , Settings for DW Function Registers" "Disabled,Reserved,Reserved,Reserved,On PC match,Read address,Write address,R/W address,?..." group.long 0x30++0x0b line.long 0x00 "DW_COMP1,DW Comparator Register 1" hexmask.long 0x00 0.--31. 1. " COMP ,Compare against PC or the data address" line.long 0x04 "DW_MASK1,DW Mask Register 1 " hexmask.long.byte 0x04 0.--4. 1. " MASK ,Mask on data address when matching against COMP" line.long 0x08 "DW_FUNCTION1,DW Function Register 1" bitfld.long 0x08 24. " MATCHED ,Comparator match" "No match,Match" bitfld.long 0x08 0.--3. " FUNCTION , Settings for DW Function Registers" "Disabled,Reserved,Reserved,Reserved,On PC match,Read address,Write address,R/W address,?..." else newline textline "DWT component base address not specified" newline endif tree.end tree.end AUTOINDENT.POP tree.end tree "ADC (Analog-to-Digital Converter)" base ad:0x40012400 group.long 0x0++0x17 line.long 0x0 "ISR,interrupt and status register" bitfld.long 0x0 7. "AWD,Analog watchdog flag" "0,1" bitfld.long 0x0 4. "OVR,ADC overrun" "0,1" bitfld.long 0x0 3. "EOS,End of sequence flag" "0,1" bitfld.long 0x0 2. "EOC,End of conversion flag" "0,1" bitfld.long 0x0 1. "EOSMP,End of sampling flag" "0,1" bitfld.long 0x0 0. "ADRDY,ADC ready" "0,1" line.long 0x4 "IER,interrupt enable register" bitfld.long 0x4 7. "AWDIE,Analog watchdog interrupt" "0,1" bitfld.long 0x4 4. "OVRIE,Overrun interrupt enable" "0,1" bitfld.long 0x4 3. "EOSIE,End of conversion sequence interrupt" "0,1" bitfld.long 0x4 2. "EOCIE,End of conversion interrupt" "0,1" bitfld.long 0x4 1. "EOSMPIE,End of sampling flag interrupt" "0,1" bitfld.long 0x4 0. "ADRDYIE,ADC ready interrupt enable" "0,1" line.long 0x8 "CR,control register" bitfld.long 0x8 31. "ADCAL,ADC calibration" "0,1" bitfld.long 0x8 4. "ADSTP,ADC stop conversion" "0,1" bitfld.long 0x8 2. "ADSTART,ADC start conversion" "0,1" bitfld.long 0x8 1. "ADDIS,ADC disable command" "0,1" bitfld.long 0x8 0. "ADEN,ADC enable command" "0,1" line.long 0xC "CFGR1,configuration register 1" hexmask.long.byte 0xC 26.--30. 1. "AWDCH,Analog watchdog channel" bitfld.long 0xC 23. "AWDEN,Analog watchdog enable" "0,1" bitfld.long 0xC 22. "AWDSGL,Enable the watchdog on a single channel" "0,1" bitfld.long 0xC 16. "DISCEN,Discontinuous mode" "0,1" bitfld.long 0xC 15. "AUTOFF,Auto-off mode" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0xC 14. "AUTDLY,Auto-delayed conversion" "0,1" endif sif (cpuis("FT32F0??*")) bitfld.long 0xC 14. "WAIT,Wait conversion mode" "0,1" endif bitfld.long 0xC 13. "CONT,Single / continuous conversion" "0,1" bitfld.long 0xC 12. "OVRMOD,Overrun management mode" "0,1" bitfld.long 0xC 10.--11. "EXTEN,External trigger enable and polarity" "0,1,2,3" newline bitfld.long 0xC 6.--8. "EXTSEL,External trigger selection" "0,1,2,3,4,5,6,7" bitfld.long 0xC 5. "ALIGN,Data alignment" "0,1" bitfld.long 0xC 3.--4. "RES,Data resolution" "0,1,2,3" bitfld.long 0xC 2. "SCANDIR,Scan sequence direction" "0,1" bitfld.long 0xC 1. "DMACFG,Direct memery access" "0,1" bitfld.long 0xC 0. "DMAEN,Direct memory access" "0,1" line.long 0x10 "CFGR2,configuration register 2" sif (cpuis("FT32F072?*")) bitfld.long 0x10 31. "JITOFF_D4,JITOFF_D4" "0,1" endif sif (cpuis("FT32F0??*")) bitfld.long 0x10 30.--31. "CKMODE,ADC clock mode" "0,1,2,3" endif sif (cpuis("FT32F072?*")) bitfld.long 0x10 30. "JITOFF_D2,JITOFF_D2" "0,1" endif line.long 0x14 "SMPR,sampling time register" bitfld.long 0x14 0.--2. "SMPR,Sampling time selection" "0,1,2,3,4,5,6,7" group.long 0x20++0x3 line.long 0x0 "TR,watchdog threshold register" hexmask.long.word 0x0 16.--27. 1. "HT,Analog watchdog higher" hexmask.long.word 0x0 0.--11. 1. "LT,Analog watchdog lower" group.long 0x28++0x3 line.long 0x0 "CHSELR,channel selection register" sif (cpuis("FT32F0??*")) bitfld.long 0x0 21. "CHSEL21,Channel-x selection" "0,1" bitfld.long 0x0 20. "CHSEL20,Channel-x selection" "0,1" bitfld.long 0x0 19. "CHSEL19,Channel-x selection" "0,1" endif bitfld.long 0x0 18. "CHSEL18,Channel-x selection" "0,1" bitfld.long 0x0 17. "CHSEL17,Channel-x selection" "0,1" bitfld.long 0x0 16. "CHSEL16,Channel-x selection" "0,1" bitfld.long 0x0 15. "CHSEL15,Channel-x selection" "0,1" bitfld.long 0x0 14. "CHSEL14,Channel-x selection" "0,1" bitfld.long 0x0 13. "CHSEL13,Channel-x selection" "0,1" bitfld.long 0x0 12. "CHSEL12,Channel-x selection" "0,1" newline bitfld.long 0x0 11. "CHSEL11,Channel-x selection" "0,1" bitfld.long 0x0 10. "CHSEL10,Channel-x selection" "0,1" bitfld.long 0x0 9. "CHSEL9,Channel-x selection" "0,1" bitfld.long 0x0 8. "CHSEL8,Channel-x selection" "0,1" bitfld.long 0x0 7. "CHSEL7,Channel-x selection" "0,1" bitfld.long 0x0 6. "CHSEL6,Channel-x selection" "0,1" bitfld.long 0x0 5. "CHSEL5,Channel-x selection" "0,1" bitfld.long 0x0 4. "CHSEL4,Channel-x selection" "0,1" bitfld.long 0x0 3. "CHSEL3,Channel-x selection" "0,1" bitfld.long 0x0 2. "CHSEL2,Channel-x selection" "0,1" newline bitfld.long 0x0 1. "CHSEL1,Channel-x selection" "0,1" bitfld.long 0x0 0. "CHSEL0,Channel-x selection" "0,1" sif (cpuis("FT32F0??*")) group.long 0x30++0xB line.long 0x0 "ETCR,ETCR register" bitfld.long 0x0 31. "EXTMOD,EXTMOD" "0,1" bitfld.long 0x0 30. "TRGDISSMP,TRGDISSMP" "0,1" newline hexmask.long.word 0x0 0.--9. 1. "EXTDLY,EXTDLY" line.long 0x4 "RTENR,RTENR register" bitfld.long 0x4 18. "RTEN18,RTEN18" "0,1" bitfld.long 0x4 17. "RTEN17,RTEN17" "0,1" newline bitfld.long 0x4 16. "RTEN16,RTEN16" "0,1" bitfld.long 0x4 15. "RTEN15,RTEN15" "0,1" newline bitfld.long 0x4 14. "RTEN14,RTEN14" "0,1" bitfld.long 0x4 13. "RTEN13,RTEN13" "0,1" newline bitfld.long 0x4 12. "RTEN12,RTEN12" "0,1" bitfld.long 0x4 11. "RTEN11,RTEN11" "0,1" newline bitfld.long 0x4 10. "RTEN10,RTEN10" "0,1" bitfld.long 0x4 9. "RTEN9,RTEN9" "0,1" newline bitfld.long 0x4 8. "RTEN8,RTEN8" "0,1" bitfld.long 0x4 7. "RTEN7,RTEN7" "0,1" newline bitfld.long 0x4 6. "RTEN6,RTEN6" "0,1" bitfld.long 0x4 5. "RTEN5,RTEN5" "0,1" newline bitfld.long 0x4 4. "RTEN4,RTEN4" "0,1" bitfld.long 0x4 3. "RTEN3,RTEN3" "0,1" newline bitfld.long 0x4 2. "RTEN2,RTEN2" "0,1" bitfld.long 0x4 1. "RTEN1,RTEN1" "0,1" newline bitfld.long 0x4 0. "RTEN0,RTEN0" "0,1" line.long 0x8 "FTENR,FTENR register" bitfld.long 0x8 18. "FTEN18,FTEN18" "0,1" bitfld.long 0x8 17. "FTEN17,FTEN17" "0,1" newline bitfld.long 0x8 16. "FTEN16,FTEN16" "0,1" bitfld.long 0x8 15. "FTEN15,FTEN15" "0,1" newline bitfld.long 0x8 14. "FTEN14,RTEN14" "0,1" bitfld.long 0x8 13. "FTEN13,RTEN13" "0,1" newline bitfld.long 0x8 12. "FTEN12,FTEN12" "0,1" bitfld.long 0x8 11. "FTEN11,FTEN11" "0,1" newline bitfld.long 0x8 10. "FTEN10,FTEN10" "0,1" bitfld.long 0x8 9. "FTEN9,FTEN9" "0,1" newline bitfld.long 0x8 8. "FTEN8,FTEN8" "0,1" bitfld.long 0x8 7. "FTEN7,FTEN7" "0,1" newline bitfld.long 0x8 6. "FTEN6,FTEN6" "0,1" bitfld.long 0x8 5. "FTEN5,FTEN5" "0,1" newline bitfld.long 0x8 4. "FTEN4,FTEN4" "0,1" bitfld.long 0x8 3. "FTEN3,FTEN3" "0,1" newline bitfld.long 0x8 2. "FTEN2,FTEN2" "0,1" bitfld.long 0x8 1. "FTEN1,FTEN1" "0,1" newline bitfld.long 0x8 0. "FTEN0,FTEN0" "0,1" group.long 0x30C++0xB line.long 0x0 "CR2,ADC control register2" bitfld.long 0x0 15. "IOSH2_SMPMOD,Sampling circuit enable" "0,1" bitfld.long 0x0 14. "IOSH2_SMPSEL,Sampling circuit enable" "0,1" newline bitfld.long 0x0 13. "IOSH2_SMPEN,Sampling circuit enable" "0,1" bitfld.long 0x0 12. "IOSH2_AMPEN,Sampling circuit enable" "0,1" newline bitfld.long 0x0 11. "IOSH1_SMPMOD,Sampling circuit enable" "0,1" bitfld.long 0x0 10. "IOSH1_SMPSEL,Sampling circuit enable" "0,1" newline bitfld.long 0x0 9. "IOSH_SMPEN,Sampling circuit enable" "0,1" bitfld.long 0x0 8. "IOSH_AMPEN,Sampling circuit keep enable" "0,1" newline bitfld.long 0x0 4. "VREF_DECIB,Bias circuit half" "0,1" bitfld.long 0x0 2.--3. "VREFSEL,Reference voltage select" "0,1,2,3" newline bitfld.long 0x0 1. "VREFEN,Reference voltage enable" "0,1" line.long 0x4 "IOSH1DR,common configuration register" hexmask.long.word 0x4 0.--15. 1. "IOSH1_DATA,Temperature sensor enable" line.long 0x8 "IOSH2DR,common configuration register" hexmask.long.word 0x8 0.--15. 1. "IOSH2_DATA,Temperature sensor enable" endif rgroup.long 0x40++0x3 line.long 0x0 "DR,data register" hexmask.long.word 0x0 0.--15. 1. "DATA,Converted data" group.long 0x308++0x3 line.long 0x0 "CCR,common configuration register" sif (cpuis("FT32F072?*")) bitfld.long 0x0 24. "VBATEN,VBAT enable" "0,1" endif bitfld.long 0x0 23. "TSEN,Temperature sensor enable" "0,1" bitfld.long 0x0 22. "VREFEN,Temperature sensor and VREFINT" "0,1" tree.end sif (cpuis("FT32F072?*")) tree "CAN (Controller Area Network)" base ad:0x40006400 group.long 0x0++0x1F line.long 0x0 "CAN_MCR,CAN_MCR" bitfld.long 0x0 16. "DBF,DBF" "0,1" bitfld.long 0x0 15. "RESET,RESET" "0,1" bitfld.long 0x0 7. "TTCM,TTCM" "0,1" bitfld.long 0x0 6. "ABOM,ABOM" "0,1" bitfld.long 0x0 5. "AWUM,AWUM" "0,1" bitfld.long 0x0 4. "NART,NART" "0,1" bitfld.long 0x0 3. "RFLM,RFLM" "0,1" bitfld.long 0x0 2. "TXFP,TXFP" "0,1" bitfld.long 0x0 1. "SLEEP,SLEEP" "0,1" bitfld.long 0x0 0. "INRQ,INRQ" "0,1" line.long 0x4 "CAN_MSR,CAN_MSR" rbitfld.long 0x4 11. "RX,RX" "0,1" rbitfld.long 0x4 10. "SAMP,SAMP" "0,1" rbitfld.long 0x4 9. "RXM,RXM" "0,1" rbitfld.long 0x4 8. "TXM,TXM" "0,1" bitfld.long 0x4 4. "SLAKI,SLAKI" "0,1" bitfld.long 0x4 3. "WKUI,WKUI" "0,1" bitfld.long 0x4 2. "ERRI,ERRI" "0,1" rbitfld.long 0x4 1. "SLAK,SLAK" "0,1" rbitfld.long 0x4 0. "INAK,INAK" "0,1" line.long 0x8 "CAN_TSR,CAN_TSR" rbitfld.long 0x8 31. "LOW2,Lowest priority flag for mailbox" "0,1" rbitfld.long 0x8 30. "LOW1,Lowest priority flag for mailbox" "0,1" rbitfld.long 0x8 29. "LOW0,Lowest priority flag for mailbox" "0,1" rbitfld.long 0x8 28. "TME2,Lowest priority flag for mailbox" "0,1" rbitfld.long 0x8 27. "TME1,Lowest priority flag for mailbox" "0,1" rbitfld.long 0x8 26. "TME0,Lowest priority flag for mailbox" "0,1" rbitfld.long 0x8 24.--25. "CODE,CODE" "0,1,2,3" bitfld.long 0x8 23. "ABRQ2,ABRQ2" "0,1" bitfld.long 0x8 19. "TERR2,TERR2" "0,1" bitfld.long 0x8 18. "ALST2,ALST2" "0,1" bitfld.long 0x8 17. "TXOK2,TXOK2" "0,1" newline bitfld.long 0x8 16. "RQCP2,RQCP2" "0,1" bitfld.long 0x8 15. "ABRQ1,ABRQ1" "0,1" bitfld.long 0x8 11. "TERR1,TERR1" "0,1" bitfld.long 0x8 10. "ALST1,ALST1" "0,1" bitfld.long 0x8 9. "TXOK1,TXOK1" "0,1" bitfld.long 0x8 8. "RQCP1,RQCP1" "0,1" bitfld.long 0x8 7. "ABRQ0,ABRQ0" "0,1" bitfld.long 0x8 3. "TERR0,TERR0" "0,1" bitfld.long 0x8 2. "ALST0,ALST0" "0,1" bitfld.long 0x8 1. "TXOK0,TXOK0" "0,1" bitfld.long 0x8 0. "RQCP0,RQCP0" "0,1" line.long 0xC "CAN_RF0R,CAN_RF0R" bitfld.long 0xC 5. "RFOM0,RFOM0" "0,1" bitfld.long 0xC 4. "FOVR0,FOVR0" "0,1" bitfld.long 0xC 3. "FULL0,FULL0" "0,1" rbitfld.long 0xC 0.--1. "FMP0,FMP0" "0,1,2,3" line.long 0x10 "CAN_RF1R,CAN_RF1R" bitfld.long 0x10 5. "RFOM1,RFOM1" "0,1" bitfld.long 0x10 4. "FOVR1,FOVR1" "0,1" bitfld.long 0x10 3. "FULL1,FULL1" "0,1" rbitfld.long 0x10 0.--1. "FMP1,FMP1" "0,1,2,3" line.long 0x14 "CAN_IER,CAN_IER" bitfld.long 0x14 17. "SLKIE,SLKIE" "0,1" bitfld.long 0x14 16. "WKUIE,WKUIE" "0,1" bitfld.long 0x14 15. "ERRIE,ERRIE" "0,1" bitfld.long 0x14 11. "LECIE,LECIE" "0,1" bitfld.long 0x14 10. "BOFIE,BOFIE" "0,1" bitfld.long 0x14 9. "EPVIE,EPVIE" "0,1" bitfld.long 0x14 8. "EWGIE,EWGIE" "0,1" bitfld.long 0x14 6. "FOVIE1,FOVIE1" "0,1" bitfld.long 0x14 5. "FFIE1,FFIE1" "0,1" bitfld.long 0x14 4. "FMPIE1,FMPIE1" "0,1" bitfld.long 0x14 3. "FOVIE0,FOVIE0" "0,1" newline bitfld.long 0x14 2. "FFIE0,FFIE0" "0,1" bitfld.long 0x14 1. "FMPIE0,FMPIE0" "0,1" bitfld.long 0x14 0. "TMEIE,TMEIE" "0,1" line.long 0x18 "CAN_ESR,CAN_ESR" hexmask.long.byte 0x18 24.--31. 1. "REC,REC" hexmask.long.byte 0x18 16.--23. 1. "TEC,TEC" bitfld.long 0x18 4.--6. "LEC,LEC" "0,1,2,3,4,5,6,7" rbitfld.long 0x18 2. "BOFF,BOFF" "0,1" rbitfld.long 0x18 1. "EPVF,EPVF" "0,1" rbitfld.long 0x18 0. "EWGF,EWGF" "0,1" line.long 0x1C "CAN_BTR,CAN_BTR" bitfld.long 0x1C 31. "SILM,SILM" "0,1" bitfld.long 0x1C 30. "LBKM,LBKM" "0,1" bitfld.long 0x1C 24.--25. "SJW,SJW" "0,1,2,3" bitfld.long 0x1C 20.--22. "TS2,TS2" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x1C 16.--19. 1. "TS1,TS1" hexmask.long.word 0x1C 0.--9. 1. "BRP,BRP" group.long 0x180++0x2F line.long 0x0 "CAN_TI0R,CAN_TI0R" hexmask.long.word 0x0 21.--31. 1. "STID,STID" hexmask.long.tbyte 0x0 3.--20. 1. "EXID,EXID" bitfld.long 0x0 2. "IDE,IDE" "0,1" bitfld.long 0x0 1. "RTR,RTR" "0,1" bitfld.long 0x0 0. "TXRQ,TXRQ" "0,1" line.long 0x4 "CAN_TDT0R,CAN_TDT0R" hexmask.long.word 0x4 16.--31. 1. "TIME,TIME" bitfld.long 0x4 8. "TGT,TGT" "0,1" hexmask.long.byte 0x4 0.--3. 1. "DLC,DLC" line.long 0x8 "CAN_TDL0R,CAN_TDL0R" hexmask.long.byte 0x8 24.--31. 1. "DATA3,DATA3" hexmask.long.byte 0x8 16.--23. 1. "DATA2,DATA2" hexmask.long.byte 0x8 8.--15. 1. "DATA1,DATA1" hexmask.long.byte 0x8 0.--7. 1. "DATA0,DATA0" line.long 0xC "CAN_TDH0R,CAN_TDH0R" hexmask.long.byte 0xC 24.--31. 1. "DATA7,DATA7" hexmask.long.byte 0xC 16.--23. 1. "DATA6,DATA6" hexmask.long.byte 0xC 8.--15. 1. "DATA5,DATA5" hexmask.long.byte 0xC 0.--7. 1. "DATA4,DATA4" line.long 0x10 "CAN_TI1R,CAN_TI1R" hexmask.long.word 0x10 21.--31. 1. "STID,STID" hexmask.long.tbyte 0x10 3.--20. 1. "EXID,EXID" bitfld.long 0x10 2. "IDE,IDE" "0,1" bitfld.long 0x10 1. "RTR,RTR" "0,1" bitfld.long 0x10 0. "TXRQ,TXRQ" "0,1" line.long 0x14 "CAN_TDT1R,CAN_TDT1R" hexmask.long.word 0x14 16.--31. 1. "TIME,TIME" bitfld.long 0x14 8. "TGT,TGT" "0,1" hexmask.long.byte 0x14 0.--3. 1. "DLC,DLC" line.long 0x18 "CAN_TDL1R,CAN_TDL1R" hexmask.long.byte 0x18 24.--31. 1. "DATA3,DATA3" hexmask.long.byte 0x18 16.--23. 1. "DATA2,DATA2" hexmask.long.byte 0x18 8.--15. 1. "DATA1,DATA1" hexmask.long.byte 0x18 0.--7. 1. "DATA0,DATA0" line.long 0x1C "CAN_TDH1R,CAN_TDH1R" hexmask.long.byte 0x1C 24.--31. 1. "DATA7,DATA7" hexmask.long.byte 0x1C 16.--23. 1. "DATA6,DATA6" hexmask.long.byte 0x1C 8.--15. 1. "DATA5,DATA5" hexmask.long.byte 0x1C 0.--7. 1. "DATA4,DATA4" line.long 0x20 "CAN_TI2R,CAN_TI2R" hexmask.long.word 0x20 21.--31. 1. "STID,STID" hexmask.long.tbyte 0x20 3.--20. 1. "EXID,EXID" bitfld.long 0x20 2. "IDE,IDE" "0,1" bitfld.long 0x20 1. "RTR,RTR" "0,1" bitfld.long 0x20 0. "TXRQ,TXRQ" "0,1" line.long 0x24 "CAN_TDT2R,CAN_TDT2R" hexmask.long.word 0x24 16.--31. 1. "TIME,TIME" bitfld.long 0x24 8. "TGT,TGT" "0,1" hexmask.long.byte 0x24 0.--3. 1. "DLC,DLC" line.long 0x28 "CAN_TDL2R,CAN_TDL2R" hexmask.long.byte 0x28 24.--31. 1. "DATA3,DATA3" hexmask.long.byte 0x28 16.--23. 1. "DATA2,DATA2" hexmask.long.byte 0x28 8.--15. 1. "DATA1,DATA1" hexmask.long.byte 0x28 0.--7. 1. "DATA0,DATA0" line.long 0x2C "CAN_TDH2R,CAN_TDH2R" hexmask.long.byte 0x2C 24.--31. 1. "DATA7,DATA7" hexmask.long.byte 0x2C 16.--23. 1. "DATA6,DATA6" hexmask.long.byte 0x2C 8.--15. 1. "DATA5,DATA5" hexmask.long.byte 0x2C 0.--7. 1. "DATA4,DATA4" rgroup.long 0x1B0++0x1F line.long 0x0 "CAN_RI0R,CAN_RI0R" hexmask.long.word 0x0 21.--31. 1. "STID,STID" hexmask.long.tbyte 0x0 3.--20. 1. "EXID,EXID" bitfld.long 0x0 2. "IDE,IDE" "0,1" bitfld.long 0x0 1. "RTR,RTR" "0,1" line.long 0x4 "CAN_RDT0R,CAN_RDT0R" hexmask.long.word 0x4 16.--31. 1. "TIME,TIME" hexmask.long.byte 0x4 8.--15. 1. "FMI,FMI" hexmask.long.byte 0x4 0.--3. 1. "DLC,DLC" line.long 0x8 "CAN_RDL0R,CAN_RDL0R" hexmask.long.byte 0x8 24.--31. 1. "DATA3,DATA3" hexmask.long.byte 0x8 16.--23. 1. "DATA2,DATA2" hexmask.long.byte 0x8 8.--15. 1. "DATA1,DATA1" hexmask.long.byte 0x8 0.--7. 1. "DATA0,DATA0" line.long 0xC "CAN_RDH0R,CAN_RDH0R" hexmask.long.byte 0xC 24.--31. 1. "DATA7,DATA7" hexmask.long.byte 0xC 16.--23. 1. "DATA6,DATA6" hexmask.long.byte 0xC 8.--15. 1. "DATA5,DATA5" hexmask.long.byte 0xC 0.--7. 1. "DATA4,DATA4" line.long 0x10 "CAN_RI1R,CAN_RI1R" hexmask.long.word 0x10 21.--31. 1. "STID,STID" hexmask.long.tbyte 0x10 3.--20. 1. "EXID,EXID" bitfld.long 0x10 2. "IDE,IDE" "0,1" bitfld.long 0x10 1. "RTR,RTR" "0,1" line.long 0x14 "CAN_RDT1R,CAN_RDT1R" hexmask.long.word 0x14 16.--31. 1. "TIME,TIME" hexmask.long.byte 0x14 8.--15. 1. "FMI,FMI" hexmask.long.byte 0x14 0.--3. 1. "DLC,DLC" line.long 0x18 "CAN_RDL1R,CAN_RDL1R" hexmask.long.byte 0x18 24.--31. 1. "DATA3,DATA3" hexmask.long.byte 0x18 16.--23. 1. "DATA2,DATA2" hexmask.long.byte 0x18 8.--15. 1. "DATA1,DATA1" hexmask.long.byte 0x18 0.--7. 1. "DATA0,DATA0" line.long 0x1C "CAN_RDH1R,CAN_RDH1R" hexmask.long.byte 0x1C 24.--31. 1. "DATA7,DATA7" hexmask.long.byte 0x1C 16.--23. 1. "DATA6,DATA6" hexmask.long.byte 0x1C 8.--15. 1. "DATA5,DATA5" hexmask.long.byte 0x1C 0.--7. 1. "DATA4,DATA4" group.long 0x200++0x7 line.long 0x0 "CAN_FMR,CAN_FMR" hexmask.long.byte 0x0 8.--13. 1. "CAN2SB,CAN2SB" bitfld.long 0x0 0. "FINIT,FINIT" "0,1" line.long 0x4 "CAN_FM1R,CAN_FM1R" bitfld.long 0x4 27. "FBM27,Filter mode" "0,1" bitfld.long 0x4 26. "FBM26,Filter mode" "0,1" bitfld.long 0x4 25. "FBM25,Filter mode" "0,1" bitfld.long 0x4 24. "FBM24,Filter mode" "0,1" bitfld.long 0x4 23. "FBM23,Filter mode" "0,1" bitfld.long 0x4 22. "FBM22,Filter mode" "0,1" bitfld.long 0x4 21. "FBM21,Filter mode" "0,1" bitfld.long 0x4 20. "FBM20,Filter mode" "0,1" bitfld.long 0x4 19. "FBM19,Filter mode" "0,1" bitfld.long 0x4 18. "FBM18,Filter mode" "0,1" bitfld.long 0x4 17. "FBM17,Filter mode" "0,1" newline bitfld.long 0x4 16. "FBM16,Filter mode" "0,1" bitfld.long 0x4 15. "FBM15,Filter mode" "0,1" bitfld.long 0x4 14. "FBM14,Filter mode" "0,1" bitfld.long 0x4 13. "FBM13,Filter mode" "0,1" bitfld.long 0x4 12. "FBM12,Filter mode" "0,1" bitfld.long 0x4 11. "FBM11,Filter mode" "0,1" bitfld.long 0x4 10. "FBM10,Filter mode" "0,1" bitfld.long 0x4 9. "FBM9,Filter mode" "0,1" bitfld.long 0x4 8. "FBM8,Filter mode" "0,1" bitfld.long 0x4 7. "FBM7,Filter mode" "0,1" bitfld.long 0x4 6. "FBM6,Filter mode" "0,1" newline bitfld.long 0x4 5. "FBM5,Filter mode" "0,1" bitfld.long 0x4 4. "FBM4,Filter mode" "0,1" bitfld.long 0x4 3. "FBM3,Filter mode" "0,1" bitfld.long 0x4 2. "FBM2,Filter mode" "0,1" bitfld.long 0x4 1. "FBM1,Filter mode" "0,1" bitfld.long 0x4 0. "FBM0,Filter mode" "0,1" group.long 0x20C++0x3 line.long 0x0 "CAN_FS1R,CAN_FS1R" bitfld.long 0x0 27. "FSC27,Filter scale configuration" "0,1" bitfld.long 0x0 26. "FSC26,Filter scale configuration" "0,1" bitfld.long 0x0 25. "FSC25,Filter scale configuration" "0,1" bitfld.long 0x0 24. "FSC24,Filter scale configuration" "0,1" bitfld.long 0x0 23. "FSC23,Filter scale configuration" "0,1" bitfld.long 0x0 22. "FSC22,Filter scale configuration" "0,1" bitfld.long 0x0 21. "FSC21,Filter scale configuration" "0,1" bitfld.long 0x0 20. "FSC20,Filter scale configuration" "0,1" bitfld.long 0x0 19. "FSC19,Filter scale configuration" "0,1" bitfld.long 0x0 18. "FSC18,Filter scale configuration" "0,1" bitfld.long 0x0 17. "FSC17,Filter scale configuration" "0,1" newline bitfld.long 0x0 16. "FSC16,Filter scale configuration" "0,1" bitfld.long 0x0 15. "FSC15,Filter scale configuration" "0,1" bitfld.long 0x0 14. "FSC14,Filter scale configuration" "0,1" bitfld.long 0x0 13. "FSC13,Filter scale configuration" "0,1" bitfld.long 0x0 12. "FSC12,Filter scale configuration" "0,1" bitfld.long 0x0 11. "FSC11,Filter scale configuration" "0,1" bitfld.long 0x0 10. "FSC10,Filter scale configuration" "0,1" bitfld.long 0x0 9. "FSC9,Filter scale configuration" "0,1" bitfld.long 0x0 8. "FSC8,Filter scale configuration" "0,1" bitfld.long 0x0 7. "FSC7,Filter scale configuration" "0,1" bitfld.long 0x0 6. "FSC6,Filter scale configuration" "0,1" newline bitfld.long 0x0 5. "FSC5,Filter scale configuration" "0,1" bitfld.long 0x0 4. "FSC4,Filter scale configuration" "0,1" bitfld.long 0x0 3. "FSC3,Filter scale configuration" "0,1" bitfld.long 0x0 2. "FSC2,Filter scale configuration" "0,1" bitfld.long 0x0 1. "FSC1,Filter scale configuration" "0,1" bitfld.long 0x0 0. "FSC0,Filter scale configuration" "0,1" group.long 0x214++0x3 line.long 0x0 "CAN_FFA1R,CAN_FFA1R" bitfld.long 0x0 27. "FFA27,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 26. "FFA26,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 25. "FFA25,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 24. "FFA24,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 23. "FFA23,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 22. "FFA22,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 21. "FFA21,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 20. "FFA20,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 19. "FFA19,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 18. "FFA18,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 17. "FFA17,Filter FIFO assignment for filter" "0,1" newline bitfld.long 0x0 16. "FFA16,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 15. "FFA15,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 14. "FFA14,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 13. "FFA13,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 12. "FFA12,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 11. "FFA11,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 10. "FFA10,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 9. "FFA9,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 8. "FFA8,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 7. "FFA7,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 6. "FFA6,Filter FIFO assignment for filter" "0,1" newline bitfld.long 0x0 5. "FFA5,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 4. "FFA4,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 3. "FFA3,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 2. "FFA2,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 1. "FFA1,Filter FIFO assignment for filter" "0,1" bitfld.long 0x0 0. "FFA0,Filter FIFO assignment for filter" "0,1" group.long 0x21C++0x3 line.long 0x0 "CAN_FA1R,CAN_FA1R" bitfld.long 0x0 27. "FACT27,Filter active" "0,1" bitfld.long 0x0 26. "FACT26,Filter active" "0,1" bitfld.long 0x0 25. "FACT25,Filter active" "0,1" bitfld.long 0x0 24. "FACT24,Filter active" "0,1" bitfld.long 0x0 23. "FACT23,Filter active" "0,1" bitfld.long 0x0 22. "FACT22,Filter active" "0,1" bitfld.long 0x0 21. "FACT21,Filter active" "0,1" bitfld.long 0x0 20. "FACT20,Filter active" "0,1" bitfld.long 0x0 19. "FACT19,Filter active" "0,1" bitfld.long 0x0 18. "FACT18,Filter active" "0,1" bitfld.long 0x0 17. "FACT17,Filter active" "0,1" newline bitfld.long 0x0 16. "FACT16,Filter active" "0,1" bitfld.long 0x0 15. "FACT15,Filter active" "0,1" bitfld.long 0x0 14. "FACT14,Filter active" "0,1" bitfld.long 0x0 13. "FACT13,Filter active" "0,1" bitfld.long 0x0 12. "FACT12,Filter active" "0,1" bitfld.long 0x0 11. "FACT11,Filter active" "0,1" bitfld.long 0x0 10. "FACT10,Filter active" "0,1" bitfld.long 0x0 9. "FACT9,Filter active" "0,1" bitfld.long 0x0 8. "FACT8,Filter active" "0,1" bitfld.long 0x0 7. "FACT7,Filter active" "0,1" bitfld.long 0x0 6. "FACT6,Filter active" "0,1" newline bitfld.long 0x0 5. "FACT5,Filter active" "0,1" bitfld.long 0x0 4. "FACT4,Filter active" "0,1" bitfld.long 0x0 3. "FACT3,Filter active" "0,1" bitfld.long 0x0 2. "FACT2,Filter active" "0,1" bitfld.long 0x0 1. "FACT1,Filter active" "0,1" bitfld.long 0x0 0. "FACT0,Filter active" "0,1" group.long 0x240++0xDF line.long 0x0 "F0R1,Filter bank 0 register 1" bitfld.long 0x0 31. "FB31,Filter bits" "0,1" bitfld.long 0x0 30. "FB30,Filter bits" "0,1" bitfld.long 0x0 29. "FB29,Filter bits" "0,1" bitfld.long 0x0 28. "FB28,Filter bits" "0,1" bitfld.long 0x0 27. "FB27,Filter bits" "0,1" bitfld.long 0x0 26. "FB26,Filter bits" "0,1" bitfld.long 0x0 25. "FB25,Filter bits" "0,1" bitfld.long 0x0 24. "FB24,Filter bits" "0,1" bitfld.long 0x0 23. "FB23,Filter bits" "0,1" bitfld.long 0x0 22. "FB22,Filter bits" "0,1" bitfld.long 0x0 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x0 20. "FB20,Filter bits" "0,1" bitfld.long 0x0 19. "FB19,Filter bits" "0,1" bitfld.long 0x0 18. "FB18,Filter bits" "0,1" bitfld.long 0x0 17. "FB17,Filter bits" "0,1" bitfld.long 0x0 16. "FB16,Filter bits" "0,1" bitfld.long 0x0 15. "FB15,Filter bits" "0,1" bitfld.long 0x0 14. "FB14,Filter bits" "0,1" bitfld.long 0x0 13. "FB13,Filter bits" "0,1" bitfld.long 0x0 12. "FB12,Filter bits" "0,1" bitfld.long 0x0 11. "FB11,Filter bits" "0,1" bitfld.long 0x0 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x0 9. "FB9,Filter bits" "0,1" bitfld.long 0x0 8. "FB8,Filter bits" "0,1" bitfld.long 0x0 7. "FB7,Filter bits" "0,1" bitfld.long 0x0 6. "FB6,Filter bits" "0,1" bitfld.long 0x0 5. "FB5,Filter bits" "0,1" bitfld.long 0x0 4. "FB4,Filter bits" "0,1" bitfld.long 0x0 3. "FB3,Filter bits" "0,1" bitfld.long 0x0 2. "FB2,Filter bits" "0,1" bitfld.long 0x0 1. "FB1,Filter bits" "0,1" bitfld.long 0x0 0. "FB0,Filter bits" "0,1" line.long 0x4 "F0R2,Filter bank 0 register 2" bitfld.long 0x4 31. "FB31,Filter bits" "0,1" bitfld.long 0x4 30. "FB30,Filter bits" "0,1" bitfld.long 0x4 29. "FB29,Filter bits" "0,1" bitfld.long 0x4 28. "FB28,Filter bits" "0,1" bitfld.long 0x4 27. "FB27,Filter bits" "0,1" bitfld.long 0x4 26. "FB26,Filter bits" "0,1" bitfld.long 0x4 25. "FB25,Filter bits" "0,1" bitfld.long 0x4 24. "FB24,Filter bits" "0,1" bitfld.long 0x4 23. "FB23,Filter bits" "0,1" bitfld.long 0x4 22. "FB22,Filter bits" "0,1" bitfld.long 0x4 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x4 20. "FB20,Filter bits" "0,1" bitfld.long 0x4 19. "FB19,Filter bits" "0,1" bitfld.long 0x4 18. "FB18,Filter bits" "0,1" bitfld.long 0x4 17. "FB17,Filter bits" "0,1" bitfld.long 0x4 16. "FB16,Filter bits" "0,1" bitfld.long 0x4 15. "FB15,Filter bits" "0,1" bitfld.long 0x4 14. "FB14,Filter bits" "0,1" bitfld.long 0x4 13. "FB13,Filter bits" "0,1" bitfld.long 0x4 12. "FB12,Filter bits" "0,1" bitfld.long 0x4 11. "FB11,Filter bits" "0,1" bitfld.long 0x4 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x4 9. "FB9,Filter bits" "0,1" bitfld.long 0x4 8. "FB8,Filter bits" "0,1" bitfld.long 0x4 7. "FB7,Filter bits" "0,1" bitfld.long 0x4 6. "FB6,Filter bits" "0,1" bitfld.long 0x4 5. "FB5,Filter bits" "0,1" bitfld.long 0x4 4. "FB4,Filter bits" "0,1" bitfld.long 0x4 3. "FB3,Filter bits" "0,1" bitfld.long 0x4 2. "FB2,Filter bits" "0,1" bitfld.long 0x4 1. "FB1,Filter bits" "0,1" bitfld.long 0x4 0. "FB0,Filter bits" "0,1" line.long 0x8 "F1R1,Filter bank 1 register 1" bitfld.long 0x8 31. "FB31,Filter bits" "0,1" bitfld.long 0x8 30. "FB30,Filter bits" "0,1" bitfld.long 0x8 29. "FB29,Filter bits" "0,1" bitfld.long 0x8 28. "FB28,Filter bits" "0,1" bitfld.long 0x8 27. "FB27,Filter bits" "0,1" bitfld.long 0x8 26. "FB26,Filter bits" "0,1" bitfld.long 0x8 25. "FB25,Filter bits" "0,1" bitfld.long 0x8 24. "FB24,Filter bits" "0,1" bitfld.long 0x8 23. "FB23,Filter bits" "0,1" bitfld.long 0x8 22. "FB22,Filter bits" "0,1" bitfld.long 0x8 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x8 20. "FB20,Filter bits" "0,1" bitfld.long 0x8 19. "FB19,Filter bits" "0,1" bitfld.long 0x8 18. "FB18,Filter bits" "0,1" bitfld.long 0x8 17. "FB17,Filter bits" "0,1" bitfld.long 0x8 16. "FB16,Filter bits" "0,1" bitfld.long 0x8 15. "FB15,Filter bits" "0,1" bitfld.long 0x8 14. "FB14,Filter bits" "0,1" bitfld.long 0x8 13. "FB13,Filter bits" "0,1" bitfld.long 0x8 12. "FB12,Filter bits" "0,1" bitfld.long 0x8 11. "FB11,Filter bits" "0,1" bitfld.long 0x8 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x8 9. "FB9,Filter bits" "0,1" bitfld.long 0x8 8. "FB8,Filter bits" "0,1" bitfld.long 0x8 7. "FB7,Filter bits" "0,1" bitfld.long 0x8 6. "FB6,Filter bits" "0,1" bitfld.long 0x8 5. "FB5,Filter bits" "0,1" bitfld.long 0x8 4. "FB4,Filter bits" "0,1" bitfld.long 0x8 3. "FB3,Filter bits" "0,1" bitfld.long 0x8 2. "FB2,Filter bits" "0,1" bitfld.long 0x8 1. "FB1,Filter bits" "0,1" bitfld.long 0x8 0. "FB0,Filter bits" "0,1" line.long 0xC "F1R2,Filter bank 1 register 2" bitfld.long 0xC 31. "FB31,Filter bits" "0,1" bitfld.long 0xC 30. "FB30,Filter bits" "0,1" bitfld.long 0xC 29. "FB29,Filter bits" "0,1" bitfld.long 0xC 28. "FB28,Filter bits" "0,1" bitfld.long 0xC 27. "FB27,Filter bits" "0,1" bitfld.long 0xC 26. "FB26,Filter bits" "0,1" bitfld.long 0xC 25. "FB25,Filter bits" "0,1" bitfld.long 0xC 24. "FB24,Filter bits" "0,1" bitfld.long 0xC 23. "FB23,Filter bits" "0,1" bitfld.long 0xC 22. "FB22,Filter bits" "0,1" bitfld.long 0xC 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xC 20. "FB20,Filter bits" "0,1" bitfld.long 0xC 19. "FB19,Filter bits" "0,1" bitfld.long 0xC 18. "FB18,Filter bits" "0,1" bitfld.long 0xC 17. "FB17,Filter bits" "0,1" bitfld.long 0xC 16. "FB16,Filter bits" "0,1" bitfld.long 0xC 15. "FB15,Filter bits" "0,1" bitfld.long 0xC 14. "FB14,Filter bits" "0,1" bitfld.long 0xC 13. "FB13,Filter bits" "0,1" bitfld.long 0xC 12. "FB12,Filter bits" "0,1" bitfld.long 0xC 11. "FB11,Filter bits" "0,1" bitfld.long 0xC 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xC 9. "FB9,Filter bits" "0,1" bitfld.long 0xC 8. "FB8,Filter bits" "0,1" bitfld.long 0xC 7. "FB7,Filter bits" "0,1" bitfld.long 0xC 6. "FB6,Filter bits" "0,1" bitfld.long 0xC 5. "FB5,Filter bits" "0,1" bitfld.long 0xC 4. "FB4,Filter bits" "0,1" bitfld.long 0xC 3. "FB3,Filter bits" "0,1" bitfld.long 0xC 2. "FB2,Filter bits" "0,1" bitfld.long 0xC 1. "FB1,Filter bits" "0,1" bitfld.long 0xC 0. "FB0,Filter bits" "0,1" line.long 0x10 "F2R1,Filter bank 2 register 1" bitfld.long 0x10 31. "FB31,Filter bits" "0,1" bitfld.long 0x10 30. "FB30,Filter bits" "0,1" bitfld.long 0x10 29. "FB29,Filter bits" "0,1" bitfld.long 0x10 28. "FB28,Filter bits" "0,1" bitfld.long 0x10 27. "FB27,Filter bits" "0,1" bitfld.long 0x10 26. "FB26,Filter bits" "0,1" bitfld.long 0x10 25. "FB25,Filter bits" "0,1" bitfld.long 0x10 24. "FB24,Filter bits" "0,1" bitfld.long 0x10 23. "FB23,Filter bits" "0,1" bitfld.long 0x10 22. "FB22,Filter bits" "0,1" bitfld.long 0x10 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x10 20. "FB20,Filter bits" "0,1" bitfld.long 0x10 19. "FB19,Filter bits" "0,1" bitfld.long 0x10 18. "FB18,Filter bits" "0,1" bitfld.long 0x10 17. "FB17,Filter bits" "0,1" bitfld.long 0x10 16. "FB16,Filter bits" "0,1" bitfld.long 0x10 15. "FB15,Filter bits" "0,1" bitfld.long 0x10 14. "FB14,Filter bits" "0,1" bitfld.long 0x10 13. "FB13,Filter bits" "0,1" bitfld.long 0x10 12. "FB12,Filter bits" "0,1" bitfld.long 0x10 11. "FB11,Filter bits" "0,1" bitfld.long 0x10 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x10 9. "FB9,Filter bits" "0,1" bitfld.long 0x10 8. "FB8,Filter bits" "0,1" bitfld.long 0x10 7. "FB7,Filter bits" "0,1" bitfld.long 0x10 6. "FB6,Filter bits" "0,1" bitfld.long 0x10 5. "FB5,Filter bits" "0,1" bitfld.long 0x10 4. "FB4,Filter bits" "0,1" bitfld.long 0x10 3. "FB3,Filter bits" "0,1" bitfld.long 0x10 2. "FB2,Filter bits" "0,1" bitfld.long 0x10 1. "FB1,Filter bits" "0,1" bitfld.long 0x10 0. "FB0,Filter bits" "0,1" line.long 0x14 "F2R2,Filter bank 2 register 2" bitfld.long 0x14 31. "FB31,Filter bits" "0,1" bitfld.long 0x14 30. "FB30,Filter bits" "0,1" bitfld.long 0x14 29. "FB29,Filter bits" "0,1" bitfld.long 0x14 28. "FB28,Filter bits" "0,1" bitfld.long 0x14 27. "FB27,Filter bits" "0,1" bitfld.long 0x14 26. "FB26,Filter bits" "0,1" bitfld.long 0x14 25. "FB25,Filter bits" "0,1" bitfld.long 0x14 24. "FB24,Filter bits" "0,1" bitfld.long 0x14 23. "FB23,Filter bits" "0,1" bitfld.long 0x14 22. "FB22,Filter bits" "0,1" bitfld.long 0x14 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x14 20. "FB20,Filter bits" "0,1" bitfld.long 0x14 19. "FB19,Filter bits" "0,1" bitfld.long 0x14 18. "FB18,Filter bits" "0,1" bitfld.long 0x14 17. "FB17,Filter bits" "0,1" bitfld.long 0x14 16. "FB16,Filter bits" "0,1" bitfld.long 0x14 15. "FB15,Filter bits" "0,1" bitfld.long 0x14 14. "FB14,Filter bits" "0,1" bitfld.long 0x14 13. "FB13,Filter bits" "0,1" bitfld.long 0x14 12. "FB12,Filter bits" "0,1" bitfld.long 0x14 11. "FB11,Filter bits" "0,1" bitfld.long 0x14 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x14 9. "FB9,Filter bits" "0,1" bitfld.long 0x14 8. "FB8,Filter bits" "0,1" bitfld.long 0x14 7. "FB7,Filter bits" "0,1" bitfld.long 0x14 6. "FB6,Filter bits" "0,1" bitfld.long 0x14 5. "FB5,Filter bits" "0,1" bitfld.long 0x14 4. "FB4,Filter bits" "0,1" bitfld.long 0x14 3. "FB3,Filter bits" "0,1" bitfld.long 0x14 2. "FB2,Filter bits" "0,1" bitfld.long 0x14 1. "FB1,Filter bits" "0,1" bitfld.long 0x14 0. "FB0,Filter bits" "0,1" line.long 0x18 "F3R1,Filter bank 3 register 1" bitfld.long 0x18 31. "FB31,Filter bits" "0,1" bitfld.long 0x18 30. "FB30,Filter bits" "0,1" bitfld.long 0x18 29. "FB29,Filter bits" "0,1" bitfld.long 0x18 28. "FB28,Filter bits" "0,1" bitfld.long 0x18 27. "FB27,Filter bits" "0,1" bitfld.long 0x18 26. "FB26,Filter bits" "0,1" bitfld.long 0x18 25. "FB25,Filter bits" "0,1" bitfld.long 0x18 24. "FB24,Filter bits" "0,1" bitfld.long 0x18 23. "FB23,Filter bits" "0,1" bitfld.long 0x18 22. "FB22,Filter bits" "0,1" bitfld.long 0x18 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x18 20. "FB20,Filter bits" "0,1" bitfld.long 0x18 19. "FB19,Filter bits" "0,1" bitfld.long 0x18 18. "FB18,Filter bits" "0,1" bitfld.long 0x18 17. "FB17,Filter bits" "0,1" bitfld.long 0x18 16. "FB16,Filter bits" "0,1" bitfld.long 0x18 15. "FB15,Filter bits" "0,1" bitfld.long 0x18 14. "FB14,Filter bits" "0,1" bitfld.long 0x18 13. "FB13,Filter bits" "0,1" bitfld.long 0x18 12. "FB12,Filter bits" "0,1" bitfld.long 0x18 11. "FB11,Filter bits" "0,1" bitfld.long 0x18 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x18 9. "FB9,Filter bits" "0,1" bitfld.long 0x18 8. "FB8,Filter bits" "0,1" bitfld.long 0x18 7. "FB7,Filter bits" "0,1" bitfld.long 0x18 6. "FB6,Filter bits" "0,1" bitfld.long 0x18 5. "FB5,Filter bits" "0,1" bitfld.long 0x18 4. "FB4,Filter bits" "0,1" bitfld.long 0x18 3. "FB3,Filter bits" "0,1" bitfld.long 0x18 2. "FB2,Filter bits" "0,1" bitfld.long 0x18 1. "FB1,Filter bits" "0,1" bitfld.long 0x18 0. "FB0,Filter bits" "0,1" line.long 0x1C "F3R2,Filter bank 3 register 2" bitfld.long 0x1C 31. "FB31,Filter bits" "0,1" bitfld.long 0x1C 30. "FB30,Filter bits" "0,1" bitfld.long 0x1C 29. "FB29,Filter bits" "0,1" bitfld.long 0x1C 28. "FB28,Filter bits" "0,1" bitfld.long 0x1C 27. "FB27,Filter bits" "0,1" bitfld.long 0x1C 26. "FB26,Filter bits" "0,1" bitfld.long 0x1C 25. "FB25,Filter bits" "0,1" bitfld.long 0x1C 24. "FB24,Filter bits" "0,1" bitfld.long 0x1C 23. "FB23,Filter bits" "0,1" bitfld.long 0x1C 22. "FB22,Filter bits" "0,1" bitfld.long 0x1C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x1C 20. "FB20,Filter bits" "0,1" bitfld.long 0x1C 19. "FB19,Filter bits" "0,1" bitfld.long 0x1C 18. "FB18,Filter bits" "0,1" bitfld.long 0x1C 17. "FB17,Filter bits" "0,1" bitfld.long 0x1C 16. "FB16,Filter bits" "0,1" bitfld.long 0x1C 15. "FB15,Filter bits" "0,1" bitfld.long 0x1C 14. "FB14,Filter bits" "0,1" bitfld.long 0x1C 13. "FB13,Filter bits" "0,1" bitfld.long 0x1C 12. "FB12,Filter bits" "0,1" bitfld.long 0x1C 11. "FB11,Filter bits" "0,1" bitfld.long 0x1C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x1C 9. "FB9,Filter bits" "0,1" bitfld.long 0x1C 8. "FB8,Filter bits" "0,1" bitfld.long 0x1C 7. "FB7,Filter bits" "0,1" bitfld.long 0x1C 6. "FB6,Filter bits" "0,1" bitfld.long 0x1C 5. "FB5,Filter bits" "0,1" bitfld.long 0x1C 4. "FB4,Filter bits" "0,1" bitfld.long 0x1C 3. "FB3,Filter bits" "0,1" bitfld.long 0x1C 2. "FB2,Filter bits" "0,1" bitfld.long 0x1C 1. "FB1,Filter bits" "0,1" bitfld.long 0x1C 0. "FB0,Filter bits" "0,1" line.long 0x20 "F4R1,Filter bank 4 register 1" bitfld.long 0x20 31. "FB31,Filter bits" "0,1" bitfld.long 0x20 30. "FB30,Filter bits" "0,1" bitfld.long 0x20 29. "FB29,Filter bits" "0,1" bitfld.long 0x20 28. "FB28,Filter bits" "0,1" bitfld.long 0x20 27. "FB27,Filter bits" "0,1" bitfld.long 0x20 26. "FB26,Filter bits" "0,1" bitfld.long 0x20 25. "FB25,Filter bits" "0,1" bitfld.long 0x20 24. "FB24,Filter bits" "0,1" bitfld.long 0x20 23. "FB23,Filter bits" "0,1" bitfld.long 0x20 22. "FB22,Filter bits" "0,1" bitfld.long 0x20 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x20 20. "FB20,Filter bits" "0,1" bitfld.long 0x20 19. "FB19,Filter bits" "0,1" bitfld.long 0x20 18. "FB18,Filter bits" "0,1" bitfld.long 0x20 17. "FB17,Filter bits" "0,1" bitfld.long 0x20 16. "FB16,Filter bits" "0,1" bitfld.long 0x20 15. "FB15,Filter bits" "0,1" bitfld.long 0x20 14. "FB14,Filter bits" "0,1" bitfld.long 0x20 13. "FB13,Filter bits" "0,1" bitfld.long 0x20 12. "FB12,Filter bits" "0,1" bitfld.long 0x20 11. "FB11,Filter bits" "0,1" bitfld.long 0x20 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x20 9. "FB9,Filter bits" "0,1" bitfld.long 0x20 8. "FB8,Filter bits" "0,1" bitfld.long 0x20 7. "FB7,Filter bits" "0,1" bitfld.long 0x20 6. "FB6,Filter bits" "0,1" bitfld.long 0x20 5. "FB5,Filter bits" "0,1" bitfld.long 0x20 4. "FB4,Filter bits" "0,1" bitfld.long 0x20 3. "FB3,Filter bits" "0,1" bitfld.long 0x20 2. "FB2,Filter bits" "0,1" bitfld.long 0x20 1. "FB1,Filter bits" "0,1" bitfld.long 0x20 0. "FB0,Filter bits" "0,1" line.long 0x24 "F4R2,Filter bank 4 register 2" bitfld.long 0x24 31. "FB31,Filter bits" "0,1" bitfld.long 0x24 30. "FB30,Filter bits" "0,1" bitfld.long 0x24 29. "FB29,Filter bits" "0,1" bitfld.long 0x24 28. "FB28,Filter bits" "0,1" bitfld.long 0x24 27. "FB27,Filter bits" "0,1" bitfld.long 0x24 26. "FB26,Filter bits" "0,1" bitfld.long 0x24 25. "FB25,Filter bits" "0,1" bitfld.long 0x24 24. "FB24,Filter bits" "0,1" bitfld.long 0x24 23. "FB23,Filter bits" "0,1" bitfld.long 0x24 22. "FB22,Filter bits" "0,1" bitfld.long 0x24 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x24 20. "FB20,Filter bits" "0,1" bitfld.long 0x24 19. "FB19,Filter bits" "0,1" bitfld.long 0x24 18. "FB18,Filter bits" "0,1" bitfld.long 0x24 17. "FB17,Filter bits" "0,1" bitfld.long 0x24 16. "FB16,Filter bits" "0,1" bitfld.long 0x24 15. "FB15,Filter bits" "0,1" bitfld.long 0x24 14. "FB14,Filter bits" "0,1" bitfld.long 0x24 13. "FB13,Filter bits" "0,1" bitfld.long 0x24 12. "FB12,Filter bits" "0,1" bitfld.long 0x24 11. "FB11,Filter bits" "0,1" bitfld.long 0x24 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x24 9. "FB9,Filter bits" "0,1" bitfld.long 0x24 8. "FB8,Filter bits" "0,1" bitfld.long 0x24 7. "FB7,Filter bits" "0,1" bitfld.long 0x24 6. "FB6,Filter bits" "0,1" bitfld.long 0x24 5. "FB5,Filter bits" "0,1" bitfld.long 0x24 4. "FB4,Filter bits" "0,1" bitfld.long 0x24 3. "FB3,Filter bits" "0,1" bitfld.long 0x24 2. "FB2,Filter bits" "0,1" bitfld.long 0x24 1. "FB1,Filter bits" "0,1" bitfld.long 0x24 0. "FB0,Filter bits" "0,1" line.long 0x28 "F5R1,Filter bank 5 register 1" bitfld.long 0x28 31. "FB31,Filter bits" "0,1" bitfld.long 0x28 30. "FB30,Filter bits" "0,1" bitfld.long 0x28 29. "FB29,Filter bits" "0,1" bitfld.long 0x28 28. "FB28,Filter bits" "0,1" bitfld.long 0x28 27. "FB27,Filter bits" "0,1" bitfld.long 0x28 26. "FB26,Filter bits" "0,1" bitfld.long 0x28 25. "FB25,Filter bits" "0,1" bitfld.long 0x28 24. "FB24,Filter bits" "0,1" bitfld.long 0x28 23. "FB23,Filter bits" "0,1" bitfld.long 0x28 22. "FB22,Filter bits" "0,1" bitfld.long 0x28 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x28 20. "FB20,Filter bits" "0,1" bitfld.long 0x28 19. "FB19,Filter bits" "0,1" bitfld.long 0x28 18. "FB18,Filter bits" "0,1" bitfld.long 0x28 17. "FB17,Filter bits" "0,1" bitfld.long 0x28 16. "FB16,Filter bits" "0,1" bitfld.long 0x28 15. "FB15,Filter bits" "0,1" bitfld.long 0x28 14. "FB14,Filter bits" "0,1" bitfld.long 0x28 13. "FB13,Filter bits" "0,1" bitfld.long 0x28 12. "FB12,Filter bits" "0,1" bitfld.long 0x28 11. "FB11,Filter bits" "0,1" bitfld.long 0x28 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x28 9. "FB9,Filter bits" "0,1" bitfld.long 0x28 8. "FB8,Filter bits" "0,1" bitfld.long 0x28 7. "FB7,Filter bits" "0,1" bitfld.long 0x28 6. "FB6,Filter bits" "0,1" bitfld.long 0x28 5. "FB5,Filter bits" "0,1" bitfld.long 0x28 4. "FB4,Filter bits" "0,1" bitfld.long 0x28 3. "FB3,Filter bits" "0,1" bitfld.long 0x28 2. "FB2,Filter bits" "0,1" bitfld.long 0x28 1. "FB1,Filter bits" "0,1" bitfld.long 0x28 0. "FB0,Filter bits" "0,1" line.long 0x2C "F5R2,Filter bank 5 register 2" bitfld.long 0x2C 31. "FB31,Filter bits" "0,1" bitfld.long 0x2C 30. "FB30,Filter bits" "0,1" bitfld.long 0x2C 29. "FB29,Filter bits" "0,1" bitfld.long 0x2C 28. "FB28,Filter bits" "0,1" bitfld.long 0x2C 27. "FB27,Filter bits" "0,1" bitfld.long 0x2C 26. "FB26,Filter bits" "0,1" bitfld.long 0x2C 25. "FB25,Filter bits" "0,1" bitfld.long 0x2C 24. "FB24,Filter bits" "0,1" bitfld.long 0x2C 23. "FB23,Filter bits" "0,1" bitfld.long 0x2C 22. "FB22,Filter bits" "0,1" bitfld.long 0x2C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x2C 20. "FB20,Filter bits" "0,1" bitfld.long 0x2C 19. "FB19,Filter bits" "0,1" bitfld.long 0x2C 18. "FB18,Filter bits" "0,1" bitfld.long 0x2C 17. "FB17,Filter bits" "0,1" bitfld.long 0x2C 16. "FB16,Filter bits" "0,1" bitfld.long 0x2C 15. "FB15,Filter bits" "0,1" bitfld.long 0x2C 14. "FB14,Filter bits" "0,1" bitfld.long 0x2C 13. "FB13,Filter bits" "0,1" bitfld.long 0x2C 12. "FB12,Filter bits" "0,1" bitfld.long 0x2C 11. "FB11,Filter bits" "0,1" bitfld.long 0x2C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x2C 9. "FB9,Filter bits" "0,1" bitfld.long 0x2C 8. "FB8,Filter bits" "0,1" bitfld.long 0x2C 7. "FB7,Filter bits" "0,1" bitfld.long 0x2C 6. "FB6,Filter bits" "0,1" bitfld.long 0x2C 5. "FB5,Filter bits" "0,1" bitfld.long 0x2C 4. "FB4,Filter bits" "0,1" bitfld.long 0x2C 3. "FB3,Filter bits" "0,1" bitfld.long 0x2C 2. "FB2,Filter bits" "0,1" bitfld.long 0x2C 1. "FB1,Filter bits" "0,1" bitfld.long 0x2C 0. "FB0,Filter bits" "0,1" line.long 0x30 "F6R1,Filter bank 6 register 1" bitfld.long 0x30 31. "FB31,Filter bits" "0,1" bitfld.long 0x30 30. "FB30,Filter bits" "0,1" bitfld.long 0x30 29. "FB29,Filter bits" "0,1" bitfld.long 0x30 28. "FB28,Filter bits" "0,1" bitfld.long 0x30 27. "FB27,Filter bits" "0,1" bitfld.long 0x30 26. "FB26,Filter bits" "0,1" bitfld.long 0x30 25. "FB25,Filter bits" "0,1" bitfld.long 0x30 24. "FB24,Filter bits" "0,1" bitfld.long 0x30 23. "FB23,Filter bits" "0,1" bitfld.long 0x30 22. "FB22,Filter bits" "0,1" bitfld.long 0x30 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x30 20. "FB20,Filter bits" "0,1" bitfld.long 0x30 19. "FB19,Filter bits" "0,1" bitfld.long 0x30 18. "FB18,Filter bits" "0,1" bitfld.long 0x30 17. "FB17,Filter bits" "0,1" bitfld.long 0x30 16. "FB16,Filter bits" "0,1" bitfld.long 0x30 15. "FB15,Filter bits" "0,1" bitfld.long 0x30 14. "FB14,Filter bits" "0,1" bitfld.long 0x30 13. "FB13,Filter bits" "0,1" bitfld.long 0x30 12. "FB12,Filter bits" "0,1" bitfld.long 0x30 11. "FB11,Filter bits" "0,1" bitfld.long 0x30 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x30 9. "FB9,Filter bits" "0,1" bitfld.long 0x30 8. "FB8,Filter bits" "0,1" bitfld.long 0x30 7. "FB7,Filter bits" "0,1" bitfld.long 0x30 6. "FB6,Filter bits" "0,1" bitfld.long 0x30 5. "FB5,Filter bits" "0,1" bitfld.long 0x30 4. "FB4,Filter bits" "0,1" bitfld.long 0x30 3. "FB3,Filter bits" "0,1" bitfld.long 0x30 2. "FB2,Filter bits" "0,1" bitfld.long 0x30 1. "FB1,Filter bits" "0,1" bitfld.long 0x30 0. "FB0,Filter bits" "0,1" line.long 0x34 "F6R2,Filter bank 6 register 2" bitfld.long 0x34 31. "FB31,Filter bits" "0,1" bitfld.long 0x34 30. "FB30,Filter bits" "0,1" bitfld.long 0x34 29. "FB29,Filter bits" "0,1" bitfld.long 0x34 28. "FB28,Filter bits" "0,1" bitfld.long 0x34 27. "FB27,Filter bits" "0,1" bitfld.long 0x34 26. "FB26,Filter bits" "0,1" bitfld.long 0x34 25. "FB25,Filter bits" "0,1" bitfld.long 0x34 24. "FB24,Filter bits" "0,1" bitfld.long 0x34 23. "FB23,Filter bits" "0,1" bitfld.long 0x34 22. "FB22,Filter bits" "0,1" bitfld.long 0x34 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x34 20. "FB20,Filter bits" "0,1" bitfld.long 0x34 19. "FB19,Filter bits" "0,1" bitfld.long 0x34 18. "FB18,Filter bits" "0,1" bitfld.long 0x34 17. "FB17,Filter bits" "0,1" bitfld.long 0x34 16. "FB16,Filter bits" "0,1" bitfld.long 0x34 15. "FB15,Filter bits" "0,1" bitfld.long 0x34 14. "FB14,Filter bits" "0,1" bitfld.long 0x34 13. "FB13,Filter bits" "0,1" bitfld.long 0x34 12. "FB12,Filter bits" "0,1" bitfld.long 0x34 11. "FB11,Filter bits" "0,1" bitfld.long 0x34 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x34 9. "FB9,Filter bits" "0,1" bitfld.long 0x34 8. "FB8,Filter bits" "0,1" bitfld.long 0x34 7. "FB7,Filter bits" "0,1" bitfld.long 0x34 6. "FB6,Filter bits" "0,1" bitfld.long 0x34 5. "FB5,Filter bits" "0,1" bitfld.long 0x34 4. "FB4,Filter bits" "0,1" bitfld.long 0x34 3. "FB3,Filter bits" "0,1" bitfld.long 0x34 2. "FB2,Filter bits" "0,1" bitfld.long 0x34 1. "FB1,Filter bits" "0,1" bitfld.long 0x34 0. "FB0,Filter bits" "0,1" line.long 0x38 "F7R1,Filter bank 7 register 1" bitfld.long 0x38 31. "FB31,Filter bits" "0,1" bitfld.long 0x38 30. "FB30,Filter bits" "0,1" bitfld.long 0x38 29. "FB29,Filter bits" "0,1" bitfld.long 0x38 28. "FB28,Filter bits" "0,1" bitfld.long 0x38 27. "FB27,Filter bits" "0,1" bitfld.long 0x38 26. "FB26,Filter bits" "0,1" bitfld.long 0x38 25. "FB25,Filter bits" "0,1" bitfld.long 0x38 24. "FB24,Filter bits" "0,1" bitfld.long 0x38 23. "FB23,Filter bits" "0,1" bitfld.long 0x38 22. "FB22,Filter bits" "0,1" bitfld.long 0x38 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x38 20. "FB20,Filter bits" "0,1" bitfld.long 0x38 19. "FB19,Filter bits" "0,1" bitfld.long 0x38 18. "FB18,Filter bits" "0,1" bitfld.long 0x38 17. "FB17,Filter bits" "0,1" bitfld.long 0x38 16. "FB16,Filter bits" "0,1" bitfld.long 0x38 15. "FB15,Filter bits" "0,1" bitfld.long 0x38 14. "FB14,Filter bits" "0,1" bitfld.long 0x38 13. "FB13,Filter bits" "0,1" bitfld.long 0x38 12. "FB12,Filter bits" "0,1" bitfld.long 0x38 11. "FB11,Filter bits" "0,1" bitfld.long 0x38 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x38 9. "FB9,Filter bits" "0,1" bitfld.long 0x38 8. "FB8,Filter bits" "0,1" bitfld.long 0x38 7. "FB7,Filter bits" "0,1" bitfld.long 0x38 6. "FB6,Filter bits" "0,1" bitfld.long 0x38 5. "FB5,Filter bits" "0,1" bitfld.long 0x38 4. "FB4,Filter bits" "0,1" bitfld.long 0x38 3. "FB3,Filter bits" "0,1" bitfld.long 0x38 2. "FB2,Filter bits" "0,1" bitfld.long 0x38 1. "FB1,Filter bits" "0,1" bitfld.long 0x38 0. "FB0,Filter bits" "0,1" line.long 0x3C "F7R2,Filter bank 7 register 2" bitfld.long 0x3C 31. "FB31,Filter bits" "0,1" bitfld.long 0x3C 30. "FB30,Filter bits" "0,1" bitfld.long 0x3C 29. "FB29,Filter bits" "0,1" bitfld.long 0x3C 28. "FB28,Filter bits" "0,1" bitfld.long 0x3C 27. "FB27,Filter bits" "0,1" bitfld.long 0x3C 26. "FB26,Filter bits" "0,1" bitfld.long 0x3C 25. "FB25,Filter bits" "0,1" bitfld.long 0x3C 24. "FB24,Filter bits" "0,1" bitfld.long 0x3C 23. "FB23,Filter bits" "0,1" bitfld.long 0x3C 22. "FB22,Filter bits" "0,1" bitfld.long 0x3C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x3C 20. "FB20,Filter bits" "0,1" bitfld.long 0x3C 19. "FB19,Filter bits" "0,1" bitfld.long 0x3C 18. "FB18,Filter bits" "0,1" bitfld.long 0x3C 17. "FB17,Filter bits" "0,1" bitfld.long 0x3C 16. "FB16,Filter bits" "0,1" bitfld.long 0x3C 15. "FB15,Filter bits" "0,1" bitfld.long 0x3C 14. "FB14,Filter bits" "0,1" bitfld.long 0x3C 13. "FB13,Filter bits" "0,1" bitfld.long 0x3C 12. "FB12,Filter bits" "0,1" bitfld.long 0x3C 11. "FB11,Filter bits" "0,1" bitfld.long 0x3C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x3C 9. "FB9,Filter bits" "0,1" bitfld.long 0x3C 8. "FB8,Filter bits" "0,1" bitfld.long 0x3C 7. "FB7,Filter bits" "0,1" bitfld.long 0x3C 6. "FB6,Filter bits" "0,1" bitfld.long 0x3C 5. "FB5,Filter bits" "0,1" bitfld.long 0x3C 4. "FB4,Filter bits" "0,1" bitfld.long 0x3C 3. "FB3,Filter bits" "0,1" bitfld.long 0x3C 2. "FB2,Filter bits" "0,1" bitfld.long 0x3C 1. "FB1,Filter bits" "0,1" bitfld.long 0x3C 0. "FB0,Filter bits" "0,1" line.long 0x40 "F8R1,Filter bank 8 register 1" bitfld.long 0x40 31. "FB31,Filter bits" "0,1" bitfld.long 0x40 30. "FB30,Filter bits" "0,1" bitfld.long 0x40 29. "FB29,Filter bits" "0,1" bitfld.long 0x40 28. "FB28,Filter bits" "0,1" bitfld.long 0x40 27. "FB27,Filter bits" "0,1" bitfld.long 0x40 26. "FB26,Filter bits" "0,1" bitfld.long 0x40 25. "FB25,Filter bits" "0,1" bitfld.long 0x40 24. "FB24,Filter bits" "0,1" bitfld.long 0x40 23. "FB23,Filter bits" "0,1" bitfld.long 0x40 22. "FB22,Filter bits" "0,1" bitfld.long 0x40 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x40 20. "FB20,Filter bits" "0,1" bitfld.long 0x40 19. "FB19,Filter bits" "0,1" bitfld.long 0x40 18. "FB18,Filter bits" "0,1" bitfld.long 0x40 17. "FB17,Filter bits" "0,1" bitfld.long 0x40 16. "FB16,Filter bits" "0,1" bitfld.long 0x40 15. "FB15,Filter bits" "0,1" bitfld.long 0x40 14. "FB14,Filter bits" "0,1" bitfld.long 0x40 13. "FB13,Filter bits" "0,1" bitfld.long 0x40 12. "FB12,Filter bits" "0,1" bitfld.long 0x40 11. "FB11,Filter bits" "0,1" bitfld.long 0x40 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x40 9. "FB9,Filter bits" "0,1" bitfld.long 0x40 8. "FB8,Filter bits" "0,1" bitfld.long 0x40 7. "FB7,Filter bits" "0,1" bitfld.long 0x40 6. "FB6,Filter bits" "0,1" bitfld.long 0x40 5. "FB5,Filter bits" "0,1" bitfld.long 0x40 4. "FB4,Filter bits" "0,1" bitfld.long 0x40 3. "FB3,Filter bits" "0,1" bitfld.long 0x40 2. "FB2,Filter bits" "0,1" bitfld.long 0x40 1. "FB1,Filter bits" "0,1" bitfld.long 0x40 0. "FB0,Filter bits" "0,1" line.long 0x44 "F8R2,Filter bank 8 register 2" bitfld.long 0x44 31. "FB31,Filter bits" "0,1" bitfld.long 0x44 30. "FB30,Filter bits" "0,1" bitfld.long 0x44 29. "FB29,Filter bits" "0,1" bitfld.long 0x44 28. "FB28,Filter bits" "0,1" bitfld.long 0x44 27. "FB27,Filter bits" "0,1" bitfld.long 0x44 26. "FB26,Filter bits" "0,1" bitfld.long 0x44 25. "FB25,Filter bits" "0,1" bitfld.long 0x44 24. "FB24,Filter bits" "0,1" bitfld.long 0x44 23. "FB23,Filter bits" "0,1" bitfld.long 0x44 22. "FB22,Filter bits" "0,1" bitfld.long 0x44 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x44 20. "FB20,Filter bits" "0,1" bitfld.long 0x44 19. "FB19,Filter bits" "0,1" bitfld.long 0x44 18. "FB18,Filter bits" "0,1" bitfld.long 0x44 17. "FB17,Filter bits" "0,1" bitfld.long 0x44 16. "FB16,Filter bits" "0,1" bitfld.long 0x44 15. "FB15,Filter bits" "0,1" bitfld.long 0x44 14. "FB14,Filter bits" "0,1" bitfld.long 0x44 13. "FB13,Filter bits" "0,1" bitfld.long 0x44 12. "FB12,Filter bits" "0,1" bitfld.long 0x44 11. "FB11,Filter bits" "0,1" bitfld.long 0x44 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x44 9. "FB9,Filter bits" "0,1" bitfld.long 0x44 8. "FB8,Filter bits" "0,1" bitfld.long 0x44 7. "FB7,Filter bits" "0,1" bitfld.long 0x44 6. "FB6,Filter bits" "0,1" bitfld.long 0x44 5. "FB5,Filter bits" "0,1" bitfld.long 0x44 4. "FB4,Filter bits" "0,1" bitfld.long 0x44 3. "FB3,Filter bits" "0,1" bitfld.long 0x44 2. "FB2,Filter bits" "0,1" bitfld.long 0x44 1. "FB1,Filter bits" "0,1" bitfld.long 0x44 0. "FB0,Filter bits" "0,1" line.long 0x48 "F9R1,Filter bank 9 register 1" bitfld.long 0x48 31. "FB31,Filter bits" "0,1" bitfld.long 0x48 30. "FB30,Filter bits" "0,1" bitfld.long 0x48 29. "FB29,Filter bits" "0,1" bitfld.long 0x48 28. "FB28,Filter bits" "0,1" bitfld.long 0x48 27. "FB27,Filter bits" "0,1" bitfld.long 0x48 26. "FB26,Filter bits" "0,1" bitfld.long 0x48 25. "FB25,Filter bits" "0,1" bitfld.long 0x48 24. "FB24,Filter bits" "0,1" bitfld.long 0x48 23. "FB23,Filter bits" "0,1" bitfld.long 0x48 22. "FB22,Filter bits" "0,1" bitfld.long 0x48 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x48 20. "FB20,Filter bits" "0,1" bitfld.long 0x48 19. "FB19,Filter bits" "0,1" bitfld.long 0x48 18. "FB18,Filter bits" "0,1" bitfld.long 0x48 17. "FB17,Filter bits" "0,1" bitfld.long 0x48 16. "FB16,Filter bits" "0,1" bitfld.long 0x48 15. "FB15,Filter bits" "0,1" bitfld.long 0x48 14. "FB14,Filter bits" "0,1" bitfld.long 0x48 13. "FB13,Filter bits" "0,1" bitfld.long 0x48 12. "FB12,Filter bits" "0,1" bitfld.long 0x48 11. "FB11,Filter bits" "0,1" bitfld.long 0x48 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x48 9. "FB9,Filter bits" "0,1" bitfld.long 0x48 8. "FB8,Filter bits" "0,1" bitfld.long 0x48 7. "FB7,Filter bits" "0,1" bitfld.long 0x48 6. "FB6,Filter bits" "0,1" bitfld.long 0x48 5. "FB5,Filter bits" "0,1" bitfld.long 0x48 4. "FB4,Filter bits" "0,1" bitfld.long 0x48 3. "FB3,Filter bits" "0,1" bitfld.long 0x48 2. "FB2,Filter bits" "0,1" bitfld.long 0x48 1. "FB1,Filter bits" "0,1" bitfld.long 0x48 0. "FB0,Filter bits" "0,1" line.long 0x4C "F9R2,Filter bank 9 register 2" bitfld.long 0x4C 31. "FB31,Filter bits" "0,1" bitfld.long 0x4C 30. "FB30,Filter bits" "0,1" bitfld.long 0x4C 29. "FB29,Filter bits" "0,1" bitfld.long 0x4C 28. "FB28,Filter bits" "0,1" bitfld.long 0x4C 27. "FB27,Filter bits" "0,1" bitfld.long 0x4C 26. "FB26,Filter bits" "0,1" bitfld.long 0x4C 25. "FB25,Filter bits" "0,1" bitfld.long 0x4C 24. "FB24,Filter bits" "0,1" bitfld.long 0x4C 23. "FB23,Filter bits" "0,1" bitfld.long 0x4C 22. "FB22,Filter bits" "0,1" bitfld.long 0x4C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x4C 20. "FB20,Filter bits" "0,1" bitfld.long 0x4C 19. "FB19,Filter bits" "0,1" bitfld.long 0x4C 18. "FB18,Filter bits" "0,1" bitfld.long 0x4C 17. "FB17,Filter bits" "0,1" bitfld.long 0x4C 16. "FB16,Filter bits" "0,1" bitfld.long 0x4C 15. "FB15,Filter bits" "0,1" bitfld.long 0x4C 14. "FB14,Filter bits" "0,1" bitfld.long 0x4C 13. "FB13,Filter bits" "0,1" bitfld.long 0x4C 12. "FB12,Filter bits" "0,1" bitfld.long 0x4C 11. "FB11,Filter bits" "0,1" bitfld.long 0x4C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x4C 9. "FB9,Filter bits" "0,1" bitfld.long 0x4C 8. "FB8,Filter bits" "0,1" bitfld.long 0x4C 7. "FB7,Filter bits" "0,1" bitfld.long 0x4C 6. "FB6,Filter bits" "0,1" bitfld.long 0x4C 5. "FB5,Filter bits" "0,1" bitfld.long 0x4C 4. "FB4,Filter bits" "0,1" bitfld.long 0x4C 3. "FB3,Filter bits" "0,1" bitfld.long 0x4C 2. "FB2,Filter bits" "0,1" bitfld.long 0x4C 1. "FB1,Filter bits" "0,1" bitfld.long 0x4C 0. "FB0,Filter bits" "0,1" line.long 0x50 "F10R1,Filter bank 10 register 1" bitfld.long 0x50 31. "FB31,Filter bits" "0,1" bitfld.long 0x50 30. "FB30,Filter bits" "0,1" bitfld.long 0x50 29. "FB29,Filter bits" "0,1" bitfld.long 0x50 28. "FB28,Filter bits" "0,1" bitfld.long 0x50 27. "FB27,Filter bits" "0,1" bitfld.long 0x50 26. "FB26,Filter bits" "0,1" bitfld.long 0x50 25. "FB25,Filter bits" "0,1" bitfld.long 0x50 24. "FB24,Filter bits" "0,1" bitfld.long 0x50 23. "FB23,Filter bits" "0,1" bitfld.long 0x50 22. "FB22,Filter bits" "0,1" bitfld.long 0x50 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x50 20. "FB20,Filter bits" "0,1" bitfld.long 0x50 19. "FB19,Filter bits" "0,1" bitfld.long 0x50 18. "FB18,Filter bits" "0,1" bitfld.long 0x50 17. "FB17,Filter bits" "0,1" bitfld.long 0x50 16. "FB16,Filter bits" "0,1" bitfld.long 0x50 15. "FB15,Filter bits" "0,1" bitfld.long 0x50 14. "FB14,Filter bits" "0,1" bitfld.long 0x50 13. "FB13,Filter bits" "0,1" bitfld.long 0x50 12. "FB12,Filter bits" "0,1" bitfld.long 0x50 11. "FB11,Filter bits" "0,1" bitfld.long 0x50 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x50 9. "FB9,Filter bits" "0,1" bitfld.long 0x50 8. "FB8,Filter bits" "0,1" bitfld.long 0x50 7. "FB7,Filter bits" "0,1" bitfld.long 0x50 6. "FB6,Filter bits" "0,1" bitfld.long 0x50 5. "FB5,Filter bits" "0,1" bitfld.long 0x50 4. "FB4,Filter bits" "0,1" bitfld.long 0x50 3. "FB3,Filter bits" "0,1" bitfld.long 0x50 2. "FB2,Filter bits" "0,1" bitfld.long 0x50 1. "FB1,Filter bits" "0,1" bitfld.long 0x50 0. "FB0,Filter bits" "0,1" line.long 0x54 "F10R2,Filter bank 10 register 2" bitfld.long 0x54 31. "FB31,Filter bits" "0,1" bitfld.long 0x54 30. "FB30,Filter bits" "0,1" bitfld.long 0x54 29. "FB29,Filter bits" "0,1" bitfld.long 0x54 28. "FB28,Filter bits" "0,1" bitfld.long 0x54 27. "FB27,Filter bits" "0,1" bitfld.long 0x54 26. "FB26,Filter bits" "0,1" bitfld.long 0x54 25. "FB25,Filter bits" "0,1" bitfld.long 0x54 24. "FB24,Filter bits" "0,1" bitfld.long 0x54 23. "FB23,Filter bits" "0,1" bitfld.long 0x54 22. "FB22,Filter bits" "0,1" bitfld.long 0x54 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x54 20. "FB20,Filter bits" "0,1" bitfld.long 0x54 19. "FB19,Filter bits" "0,1" bitfld.long 0x54 18. "FB18,Filter bits" "0,1" bitfld.long 0x54 17. "FB17,Filter bits" "0,1" bitfld.long 0x54 16. "FB16,Filter bits" "0,1" bitfld.long 0x54 15. "FB15,Filter bits" "0,1" bitfld.long 0x54 14. "FB14,Filter bits" "0,1" bitfld.long 0x54 13. "FB13,Filter bits" "0,1" bitfld.long 0x54 12. "FB12,Filter bits" "0,1" bitfld.long 0x54 11. "FB11,Filter bits" "0,1" bitfld.long 0x54 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x54 9. "FB9,Filter bits" "0,1" bitfld.long 0x54 8. "FB8,Filter bits" "0,1" bitfld.long 0x54 7. "FB7,Filter bits" "0,1" bitfld.long 0x54 6. "FB6,Filter bits" "0,1" bitfld.long 0x54 5. "FB5,Filter bits" "0,1" bitfld.long 0x54 4. "FB4,Filter bits" "0,1" bitfld.long 0x54 3. "FB3,Filter bits" "0,1" bitfld.long 0x54 2. "FB2,Filter bits" "0,1" bitfld.long 0x54 1. "FB1,Filter bits" "0,1" bitfld.long 0x54 0. "FB0,Filter bits" "0,1" line.long 0x58 "F11R1,Filter bank 11 register 1" bitfld.long 0x58 31. "FB31,Filter bits" "0,1" bitfld.long 0x58 30. "FB30,Filter bits" "0,1" bitfld.long 0x58 29. "FB29,Filter bits" "0,1" bitfld.long 0x58 28. "FB28,Filter bits" "0,1" bitfld.long 0x58 27. "FB27,Filter bits" "0,1" bitfld.long 0x58 26. "FB26,Filter bits" "0,1" bitfld.long 0x58 25. "FB25,Filter bits" "0,1" bitfld.long 0x58 24. "FB24,Filter bits" "0,1" bitfld.long 0x58 23. "FB23,Filter bits" "0,1" bitfld.long 0x58 22. "FB22,Filter bits" "0,1" bitfld.long 0x58 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x58 20. "FB20,Filter bits" "0,1" bitfld.long 0x58 19. "FB19,Filter bits" "0,1" bitfld.long 0x58 18. "FB18,Filter bits" "0,1" bitfld.long 0x58 17. "FB17,Filter bits" "0,1" bitfld.long 0x58 16. "FB16,Filter bits" "0,1" bitfld.long 0x58 15. "FB15,Filter bits" "0,1" bitfld.long 0x58 14. "FB14,Filter bits" "0,1" bitfld.long 0x58 13. "FB13,Filter bits" "0,1" bitfld.long 0x58 12. "FB12,Filter bits" "0,1" bitfld.long 0x58 11. "FB11,Filter bits" "0,1" bitfld.long 0x58 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x58 9. "FB9,Filter bits" "0,1" bitfld.long 0x58 8. "FB8,Filter bits" "0,1" bitfld.long 0x58 7. "FB7,Filter bits" "0,1" bitfld.long 0x58 6. "FB6,Filter bits" "0,1" bitfld.long 0x58 5. "FB5,Filter bits" "0,1" bitfld.long 0x58 4. "FB4,Filter bits" "0,1" bitfld.long 0x58 3. "FB3,Filter bits" "0,1" bitfld.long 0x58 2. "FB2,Filter bits" "0,1" bitfld.long 0x58 1. "FB1,Filter bits" "0,1" bitfld.long 0x58 0. "FB0,Filter bits" "0,1" line.long 0x5C "F11R2,Filter bank 11 register 2" bitfld.long 0x5C 31. "FB31,Filter bits" "0,1" bitfld.long 0x5C 30. "FB30,Filter bits" "0,1" bitfld.long 0x5C 29. "FB29,Filter bits" "0,1" bitfld.long 0x5C 28. "FB28,Filter bits" "0,1" bitfld.long 0x5C 27. "FB27,Filter bits" "0,1" bitfld.long 0x5C 26. "FB26,Filter bits" "0,1" bitfld.long 0x5C 25. "FB25,Filter bits" "0,1" bitfld.long 0x5C 24. "FB24,Filter bits" "0,1" bitfld.long 0x5C 23. "FB23,Filter bits" "0,1" bitfld.long 0x5C 22. "FB22,Filter bits" "0,1" bitfld.long 0x5C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x5C 20. "FB20,Filter bits" "0,1" bitfld.long 0x5C 19. "FB19,Filter bits" "0,1" bitfld.long 0x5C 18. "FB18,Filter bits" "0,1" bitfld.long 0x5C 17. "FB17,Filter bits" "0,1" bitfld.long 0x5C 16. "FB16,Filter bits" "0,1" bitfld.long 0x5C 15. "FB15,Filter bits" "0,1" bitfld.long 0x5C 14. "FB14,Filter bits" "0,1" bitfld.long 0x5C 13. "FB13,Filter bits" "0,1" bitfld.long 0x5C 12. "FB12,Filter bits" "0,1" bitfld.long 0x5C 11. "FB11,Filter bits" "0,1" bitfld.long 0x5C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x5C 9. "FB9,Filter bits" "0,1" bitfld.long 0x5C 8. "FB8,Filter bits" "0,1" bitfld.long 0x5C 7. "FB7,Filter bits" "0,1" bitfld.long 0x5C 6. "FB6,Filter bits" "0,1" bitfld.long 0x5C 5. "FB5,Filter bits" "0,1" bitfld.long 0x5C 4. "FB4,Filter bits" "0,1" bitfld.long 0x5C 3. "FB3,Filter bits" "0,1" bitfld.long 0x5C 2. "FB2,Filter bits" "0,1" bitfld.long 0x5C 1. "FB1,Filter bits" "0,1" bitfld.long 0x5C 0. "FB0,Filter bits" "0,1" line.long 0x60 "F12R1,Filter bank 4 register 1" bitfld.long 0x60 31. "FB31,Filter bits" "0,1" bitfld.long 0x60 30. "FB30,Filter bits" "0,1" bitfld.long 0x60 29. "FB29,Filter bits" "0,1" bitfld.long 0x60 28. "FB28,Filter bits" "0,1" bitfld.long 0x60 27. "FB27,Filter bits" "0,1" bitfld.long 0x60 26. "FB26,Filter bits" "0,1" bitfld.long 0x60 25. "FB25,Filter bits" "0,1" bitfld.long 0x60 24. "FB24,Filter bits" "0,1" bitfld.long 0x60 23. "FB23,Filter bits" "0,1" bitfld.long 0x60 22. "FB22,Filter bits" "0,1" bitfld.long 0x60 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x60 20. "FB20,Filter bits" "0,1" bitfld.long 0x60 19. "FB19,Filter bits" "0,1" bitfld.long 0x60 18. "FB18,Filter bits" "0,1" bitfld.long 0x60 17. "FB17,Filter bits" "0,1" bitfld.long 0x60 16. "FB16,Filter bits" "0,1" bitfld.long 0x60 15. "FB15,Filter bits" "0,1" bitfld.long 0x60 14. "FB14,Filter bits" "0,1" bitfld.long 0x60 13. "FB13,Filter bits" "0,1" bitfld.long 0x60 12. "FB12,Filter bits" "0,1" bitfld.long 0x60 11. "FB11,Filter bits" "0,1" bitfld.long 0x60 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x60 9. "FB9,Filter bits" "0,1" bitfld.long 0x60 8. "FB8,Filter bits" "0,1" bitfld.long 0x60 7. "FB7,Filter bits" "0,1" bitfld.long 0x60 6. "FB6,Filter bits" "0,1" bitfld.long 0x60 5. "FB5,Filter bits" "0,1" bitfld.long 0x60 4. "FB4,Filter bits" "0,1" bitfld.long 0x60 3. "FB3,Filter bits" "0,1" bitfld.long 0x60 2. "FB2,Filter bits" "0,1" bitfld.long 0x60 1. "FB1,Filter bits" "0,1" bitfld.long 0x60 0. "FB0,Filter bits" "0,1" line.long 0x64 "F12R2,Filter bank 12 register 2" bitfld.long 0x64 31. "FB31,Filter bits" "0,1" bitfld.long 0x64 30. "FB30,Filter bits" "0,1" bitfld.long 0x64 29. "FB29,Filter bits" "0,1" bitfld.long 0x64 28. "FB28,Filter bits" "0,1" bitfld.long 0x64 27. "FB27,Filter bits" "0,1" bitfld.long 0x64 26. "FB26,Filter bits" "0,1" bitfld.long 0x64 25. "FB25,Filter bits" "0,1" bitfld.long 0x64 24. "FB24,Filter bits" "0,1" bitfld.long 0x64 23. "FB23,Filter bits" "0,1" bitfld.long 0x64 22. "FB22,Filter bits" "0,1" bitfld.long 0x64 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x64 20. "FB20,Filter bits" "0,1" bitfld.long 0x64 19. "FB19,Filter bits" "0,1" bitfld.long 0x64 18. "FB18,Filter bits" "0,1" bitfld.long 0x64 17. "FB17,Filter bits" "0,1" bitfld.long 0x64 16. "FB16,Filter bits" "0,1" bitfld.long 0x64 15. "FB15,Filter bits" "0,1" bitfld.long 0x64 14. "FB14,Filter bits" "0,1" bitfld.long 0x64 13. "FB13,Filter bits" "0,1" bitfld.long 0x64 12. "FB12,Filter bits" "0,1" bitfld.long 0x64 11. "FB11,Filter bits" "0,1" bitfld.long 0x64 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x64 9. "FB9,Filter bits" "0,1" bitfld.long 0x64 8. "FB8,Filter bits" "0,1" bitfld.long 0x64 7. "FB7,Filter bits" "0,1" bitfld.long 0x64 6. "FB6,Filter bits" "0,1" bitfld.long 0x64 5. "FB5,Filter bits" "0,1" bitfld.long 0x64 4. "FB4,Filter bits" "0,1" bitfld.long 0x64 3. "FB3,Filter bits" "0,1" bitfld.long 0x64 2. "FB2,Filter bits" "0,1" bitfld.long 0x64 1. "FB1,Filter bits" "0,1" bitfld.long 0x64 0. "FB0,Filter bits" "0,1" line.long 0x68 "F13R1,Filter bank 13 register 1" bitfld.long 0x68 31. "FB31,Filter bits" "0,1" bitfld.long 0x68 30. "FB30,Filter bits" "0,1" bitfld.long 0x68 29. "FB29,Filter bits" "0,1" bitfld.long 0x68 28. "FB28,Filter bits" "0,1" bitfld.long 0x68 27. "FB27,Filter bits" "0,1" bitfld.long 0x68 26. "FB26,Filter bits" "0,1" bitfld.long 0x68 25. "FB25,Filter bits" "0,1" bitfld.long 0x68 24. "FB24,Filter bits" "0,1" bitfld.long 0x68 23. "FB23,Filter bits" "0,1" bitfld.long 0x68 22. "FB22,Filter bits" "0,1" bitfld.long 0x68 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x68 20. "FB20,Filter bits" "0,1" bitfld.long 0x68 19. "FB19,Filter bits" "0,1" bitfld.long 0x68 18. "FB18,Filter bits" "0,1" bitfld.long 0x68 17. "FB17,Filter bits" "0,1" bitfld.long 0x68 16. "FB16,Filter bits" "0,1" bitfld.long 0x68 15. "FB15,Filter bits" "0,1" bitfld.long 0x68 14. "FB14,Filter bits" "0,1" bitfld.long 0x68 13. "FB13,Filter bits" "0,1" bitfld.long 0x68 12. "FB12,Filter bits" "0,1" bitfld.long 0x68 11. "FB11,Filter bits" "0,1" bitfld.long 0x68 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x68 9. "FB9,Filter bits" "0,1" bitfld.long 0x68 8. "FB8,Filter bits" "0,1" bitfld.long 0x68 7. "FB7,Filter bits" "0,1" bitfld.long 0x68 6. "FB6,Filter bits" "0,1" bitfld.long 0x68 5. "FB5,Filter bits" "0,1" bitfld.long 0x68 4. "FB4,Filter bits" "0,1" bitfld.long 0x68 3. "FB3,Filter bits" "0,1" bitfld.long 0x68 2. "FB2,Filter bits" "0,1" bitfld.long 0x68 1. "FB1,Filter bits" "0,1" bitfld.long 0x68 0. "FB0,Filter bits" "0,1" line.long 0x6C "F13R2,Filter bank 13 register 2" bitfld.long 0x6C 31. "FB31,Filter bits" "0,1" bitfld.long 0x6C 30. "FB30,Filter bits" "0,1" bitfld.long 0x6C 29. "FB29,Filter bits" "0,1" bitfld.long 0x6C 28. "FB28,Filter bits" "0,1" bitfld.long 0x6C 27. "FB27,Filter bits" "0,1" bitfld.long 0x6C 26. "FB26,Filter bits" "0,1" bitfld.long 0x6C 25. "FB25,Filter bits" "0,1" bitfld.long 0x6C 24. "FB24,Filter bits" "0,1" bitfld.long 0x6C 23. "FB23,Filter bits" "0,1" bitfld.long 0x6C 22. "FB22,Filter bits" "0,1" bitfld.long 0x6C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x6C 20. "FB20,Filter bits" "0,1" bitfld.long 0x6C 19. "FB19,Filter bits" "0,1" bitfld.long 0x6C 18. "FB18,Filter bits" "0,1" bitfld.long 0x6C 17. "FB17,Filter bits" "0,1" bitfld.long 0x6C 16. "FB16,Filter bits" "0,1" bitfld.long 0x6C 15. "FB15,Filter bits" "0,1" bitfld.long 0x6C 14. "FB14,Filter bits" "0,1" bitfld.long 0x6C 13. "FB13,Filter bits" "0,1" bitfld.long 0x6C 12. "FB12,Filter bits" "0,1" bitfld.long 0x6C 11. "FB11,Filter bits" "0,1" bitfld.long 0x6C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x6C 9. "FB9,Filter bits" "0,1" bitfld.long 0x6C 8. "FB8,Filter bits" "0,1" bitfld.long 0x6C 7. "FB7,Filter bits" "0,1" bitfld.long 0x6C 6. "FB6,Filter bits" "0,1" bitfld.long 0x6C 5. "FB5,Filter bits" "0,1" bitfld.long 0x6C 4. "FB4,Filter bits" "0,1" bitfld.long 0x6C 3. "FB3,Filter bits" "0,1" bitfld.long 0x6C 2. "FB2,Filter bits" "0,1" bitfld.long 0x6C 1. "FB1,Filter bits" "0,1" bitfld.long 0x6C 0. "FB0,Filter bits" "0,1" line.long 0x70 "F14R1,Filter bank 14 register 1" bitfld.long 0x70 31. "FB31,Filter bits" "0,1" bitfld.long 0x70 30. "FB30,Filter bits" "0,1" bitfld.long 0x70 29. "FB29,Filter bits" "0,1" bitfld.long 0x70 28. "FB28,Filter bits" "0,1" bitfld.long 0x70 27. "FB27,Filter bits" "0,1" bitfld.long 0x70 26. "FB26,Filter bits" "0,1" bitfld.long 0x70 25. "FB25,Filter bits" "0,1" bitfld.long 0x70 24. "FB24,Filter bits" "0,1" bitfld.long 0x70 23. "FB23,Filter bits" "0,1" bitfld.long 0x70 22. "FB22,Filter bits" "0,1" bitfld.long 0x70 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x70 20. "FB20,Filter bits" "0,1" bitfld.long 0x70 19. "FB19,Filter bits" "0,1" bitfld.long 0x70 18. "FB18,Filter bits" "0,1" bitfld.long 0x70 17. "FB17,Filter bits" "0,1" bitfld.long 0x70 16. "FB16,Filter bits" "0,1" bitfld.long 0x70 15. "FB15,Filter bits" "0,1" bitfld.long 0x70 14. "FB14,Filter bits" "0,1" bitfld.long 0x70 13. "FB13,Filter bits" "0,1" bitfld.long 0x70 12. "FB12,Filter bits" "0,1" bitfld.long 0x70 11. "FB11,Filter bits" "0,1" bitfld.long 0x70 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x70 9. "FB9,Filter bits" "0,1" bitfld.long 0x70 8. "FB8,Filter bits" "0,1" bitfld.long 0x70 7. "FB7,Filter bits" "0,1" bitfld.long 0x70 6. "FB6,Filter bits" "0,1" bitfld.long 0x70 5. "FB5,Filter bits" "0,1" bitfld.long 0x70 4. "FB4,Filter bits" "0,1" bitfld.long 0x70 3. "FB3,Filter bits" "0,1" bitfld.long 0x70 2. "FB2,Filter bits" "0,1" bitfld.long 0x70 1. "FB1,Filter bits" "0,1" bitfld.long 0x70 0. "FB0,Filter bits" "0,1" line.long 0x74 "F14R2,Filter bank 14 register 2" bitfld.long 0x74 31. "FB31,Filter bits" "0,1" bitfld.long 0x74 30. "FB30,Filter bits" "0,1" bitfld.long 0x74 29. "FB29,Filter bits" "0,1" bitfld.long 0x74 28. "FB28,Filter bits" "0,1" bitfld.long 0x74 27. "FB27,Filter bits" "0,1" bitfld.long 0x74 26. "FB26,Filter bits" "0,1" bitfld.long 0x74 25. "FB25,Filter bits" "0,1" bitfld.long 0x74 24. "FB24,Filter bits" "0,1" bitfld.long 0x74 23. "FB23,Filter bits" "0,1" bitfld.long 0x74 22. "FB22,Filter bits" "0,1" bitfld.long 0x74 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x74 20. "FB20,Filter bits" "0,1" bitfld.long 0x74 19. "FB19,Filter bits" "0,1" bitfld.long 0x74 18. "FB18,Filter bits" "0,1" bitfld.long 0x74 17. "FB17,Filter bits" "0,1" bitfld.long 0x74 16. "FB16,Filter bits" "0,1" bitfld.long 0x74 15. "FB15,Filter bits" "0,1" bitfld.long 0x74 14. "FB14,Filter bits" "0,1" bitfld.long 0x74 13. "FB13,Filter bits" "0,1" bitfld.long 0x74 12. "FB12,Filter bits" "0,1" bitfld.long 0x74 11. "FB11,Filter bits" "0,1" bitfld.long 0x74 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x74 9. "FB9,Filter bits" "0,1" bitfld.long 0x74 8. "FB8,Filter bits" "0,1" bitfld.long 0x74 7. "FB7,Filter bits" "0,1" bitfld.long 0x74 6. "FB6,Filter bits" "0,1" bitfld.long 0x74 5. "FB5,Filter bits" "0,1" bitfld.long 0x74 4. "FB4,Filter bits" "0,1" bitfld.long 0x74 3. "FB3,Filter bits" "0,1" bitfld.long 0x74 2. "FB2,Filter bits" "0,1" bitfld.long 0x74 1. "FB1,Filter bits" "0,1" bitfld.long 0x74 0. "FB0,Filter bits" "0,1" line.long 0x78 "F15R1,Filter bank 15 register 1" bitfld.long 0x78 31. "FB31,Filter bits" "0,1" bitfld.long 0x78 30. "FB30,Filter bits" "0,1" bitfld.long 0x78 29. "FB29,Filter bits" "0,1" bitfld.long 0x78 28. "FB28,Filter bits" "0,1" bitfld.long 0x78 27. "FB27,Filter bits" "0,1" bitfld.long 0x78 26. "FB26,Filter bits" "0,1" bitfld.long 0x78 25. "FB25,Filter bits" "0,1" bitfld.long 0x78 24. "FB24,Filter bits" "0,1" bitfld.long 0x78 23. "FB23,Filter bits" "0,1" bitfld.long 0x78 22. "FB22,Filter bits" "0,1" bitfld.long 0x78 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x78 20. "FB20,Filter bits" "0,1" bitfld.long 0x78 19. "FB19,Filter bits" "0,1" bitfld.long 0x78 18. "FB18,Filter bits" "0,1" bitfld.long 0x78 17. "FB17,Filter bits" "0,1" bitfld.long 0x78 16. "FB16,Filter bits" "0,1" bitfld.long 0x78 15. "FB15,Filter bits" "0,1" bitfld.long 0x78 14. "FB14,Filter bits" "0,1" bitfld.long 0x78 13. "FB13,Filter bits" "0,1" bitfld.long 0x78 12. "FB12,Filter bits" "0,1" bitfld.long 0x78 11. "FB11,Filter bits" "0,1" bitfld.long 0x78 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x78 9. "FB9,Filter bits" "0,1" bitfld.long 0x78 8. "FB8,Filter bits" "0,1" bitfld.long 0x78 7. "FB7,Filter bits" "0,1" bitfld.long 0x78 6. "FB6,Filter bits" "0,1" bitfld.long 0x78 5. "FB5,Filter bits" "0,1" bitfld.long 0x78 4. "FB4,Filter bits" "0,1" bitfld.long 0x78 3. "FB3,Filter bits" "0,1" bitfld.long 0x78 2. "FB2,Filter bits" "0,1" bitfld.long 0x78 1. "FB1,Filter bits" "0,1" bitfld.long 0x78 0. "FB0,Filter bits" "0,1" line.long 0x7C "F15R2,Filter bank 15 register 2" bitfld.long 0x7C 31. "FB31,Filter bits" "0,1" bitfld.long 0x7C 30. "FB30,Filter bits" "0,1" bitfld.long 0x7C 29. "FB29,Filter bits" "0,1" bitfld.long 0x7C 28. "FB28,Filter bits" "0,1" bitfld.long 0x7C 27. "FB27,Filter bits" "0,1" bitfld.long 0x7C 26. "FB26,Filter bits" "0,1" bitfld.long 0x7C 25. "FB25,Filter bits" "0,1" bitfld.long 0x7C 24. "FB24,Filter bits" "0,1" bitfld.long 0x7C 23. "FB23,Filter bits" "0,1" bitfld.long 0x7C 22. "FB22,Filter bits" "0,1" bitfld.long 0x7C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x7C 20. "FB20,Filter bits" "0,1" bitfld.long 0x7C 19. "FB19,Filter bits" "0,1" bitfld.long 0x7C 18. "FB18,Filter bits" "0,1" bitfld.long 0x7C 17. "FB17,Filter bits" "0,1" bitfld.long 0x7C 16. "FB16,Filter bits" "0,1" bitfld.long 0x7C 15. "FB15,Filter bits" "0,1" bitfld.long 0x7C 14. "FB14,Filter bits" "0,1" bitfld.long 0x7C 13. "FB13,Filter bits" "0,1" bitfld.long 0x7C 12. "FB12,Filter bits" "0,1" bitfld.long 0x7C 11. "FB11,Filter bits" "0,1" bitfld.long 0x7C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x7C 9. "FB9,Filter bits" "0,1" bitfld.long 0x7C 8. "FB8,Filter bits" "0,1" bitfld.long 0x7C 7. "FB7,Filter bits" "0,1" bitfld.long 0x7C 6. "FB6,Filter bits" "0,1" bitfld.long 0x7C 5. "FB5,Filter bits" "0,1" bitfld.long 0x7C 4. "FB4,Filter bits" "0,1" bitfld.long 0x7C 3. "FB3,Filter bits" "0,1" bitfld.long 0x7C 2. "FB2,Filter bits" "0,1" bitfld.long 0x7C 1. "FB1,Filter bits" "0,1" bitfld.long 0x7C 0. "FB0,Filter bits" "0,1" line.long 0x80 "F16R1,Filter bank 16 register 1" bitfld.long 0x80 31. "FB31,Filter bits" "0,1" bitfld.long 0x80 30. "FB30,Filter bits" "0,1" bitfld.long 0x80 29. "FB29,Filter bits" "0,1" bitfld.long 0x80 28. "FB28,Filter bits" "0,1" bitfld.long 0x80 27. "FB27,Filter bits" "0,1" bitfld.long 0x80 26. "FB26,Filter bits" "0,1" bitfld.long 0x80 25. "FB25,Filter bits" "0,1" bitfld.long 0x80 24. "FB24,Filter bits" "0,1" bitfld.long 0x80 23. "FB23,Filter bits" "0,1" bitfld.long 0x80 22. "FB22,Filter bits" "0,1" bitfld.long 0x80 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x80 20. "FB20,Filter bits" "0,1" bitfld.long 0x80 19. "FB19,Filter bits" "0,1" bitfld.long 0x80 18. "FB18,Filter bits" "0,1" bitfld.long 0x80 17. "FB17,Filter bits" "0,1" bitfld.long 0x80 16. "FB16,Filter bits" "0,1" bitfld.long 0x80 15. "FB15,Filter bits" "0,1" bitfld.long 0x80 14. "FB14,Filter bits" "0,1" bitfld.long 0x80 13. "FB13,Filter bits" "0,1" bitfld.long 0x80 12. "FB12,Filter bits" "0,1" bitfld.long 0x80 11. "FB11,Filter bits" "0,1" bitfld.long 0x80 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x80 9. "FB9,Filter bits" "0,1" bitfld.long 0x80 8. "FB8,Filter bits" "0,1" bitfld.long 0x80 7. "FB7,Filter bits" "0,1" bitfld.long 0x80 6. "FB6,Filter bits" "0,1" bitfld.long 0x80 5. "FB5,Filter bits" "0,1" bitfld.long 0x80 4. "FB4,Filter bits" "0,1" bitfld.long 0x80 3. "FB3,Filter bits" "0,1" bitfld.long 0x80 2. "FB2,Filter bits" "0,1" bitfld.long 0x80 1. "FB1,Filter bits" "0,1" bitfld.long 0x80 0. "FB0,Filter bits" "0,1" line.long 0x84 "F16R2,Filter bank 16 register 2" bitfld.long 0x84 31. "FB31,Filter bits" "0,1" bitfld.long 0x84 30. "FB30,Filter bits" "0,1" bitfld.long 0x84 29. "FB29,Filter bits" "0,1" bitfld.long 0x84 28. "FB28,Filter bits" "0,1" bitfld.long 0x84 27. "FB27,Filter bits" "0,1" bitfld.long 0x84 26. "FB26,Filter bits" "0,1" bitfld.long 0x84 25. "FB25,Filter bits" "0,1" bitfld.long 0x84 24. "FB24,Filter bits" "0,1" bitfld.long 0x84 23. "FB23,Filter bits" "0,1" bitfld.long 0x84 22. "FB22,Filter bits" "0,1" bitfld.long 0x84 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x84 20. "FB20,Filter bits" "0,1" bitfld.long 0x84 19. "FB19,Filter bits" "0,1" bitfld.long 0x84 18. "FB18,Filter bits" "0,1" bitfld.long 0x84 17. "FB17,Filter bits" "0,1" bitfld.long 0x84 16. "FB16,Filter bits" "0,1" bitfld.long 0x84 15. "FB15,Filter bits" "0,1" bitfld.long 0x84 14. "FB14,Filter bits" "0,1" bitfld.long 0x84 13. "FB13,Filter bits" "0,1" bitfld.long 0x84 12. "FB12,Filter bits" "0,1" bitfld.long 0x84 11. "FB11,Filter bits" "0,1" bitfld.long 0x84 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x84 9. "FB9,Filter bits" "0,1" bitfld.long 0x84 8. "FB8,Filter bits" "0,1" bitfld.long 0x84 7. "FB7,Filter bits" "0,1" bitfld.long 0x84 6. "FB6,Filter bits" "0,1" bitfld.long 0x84 5. "FB5,Filter bits" "0,1" bitfld.long 0x84 4. "FB4,Filter bits" "0,1" bitfld.long 0x84 3. "FB3,Filter bits" "0,1" bitfld.long 0x84 2. "FB2,Filter bits" "0,1" bitfld.long 0x84 1. "FB1,Filter bits" "0,1" bitfld.long 0x84 0. "FB0,Filter bits" "0,1" line.long 0x88 "F17R1,Filter bank 17 register 1" bitfld.long 0x88 31. "FB31,Filter bits" "0,1" bitfld.long 0x88 30. "FB30,Filter bits" "0,1" bitfld.long 0x88 29. "FB29,Filter bits" "0,1" bitfld.long 0x88 28. "FB28,Filter bits" "0,1" bitfld.long 0x88 27. "FB27,Filter bits" "0,1" bitfld.long 0x88 26. "FB26,Filter bits" "0,1" bitfld.long 0x88 25. "FB25,Filter bits" "0,1" bitfld.long 0x88 24. "FB24,Filter bits" "0,1" bitfld.long 0x88 23. "FB23,Filter bits" "0,1" bitfld.long 0x88 22. "FB22,Filter bits" "0,1" bitfld.long 0x88 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x88 20. "FB20,Filter bits" "0,1" bitfld.long 0x88 19. "FB19,Filter bits" "0,1" bitfld.long 0x88 18. "FB18,Filter bits" "0,1" bitfld.long 0x88 17. "FB17,Filter bits" "0,1" bitfld.long 0x88 16. "FB16,Filter bits" "0,1" bitfld.long 0x88 15. "FB15,Filter bits" "0,1" bitfld.long 0x88 14. "FB14,Filter bits" "0,1" bitfld.long 0x88 13. "FB13,Filter bits" "0,1" bitfld.long 0x88 12. "FB12,Filter bits" "0,1" bitfld.long 0x88 11. "FB11,Filter bits" "0,1" bitfld.long 0x88 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x88 9. "FB9,Filter bits" "0,1" bitfld.long 0x88 8. "FB8,Filter bits" "0,1" bitfld.long 0x88 7. "FB7,Filter bits" "0,1" bitfld.long 0x88 6. "FB6,Filter bits" "0,1" bitfld.long 0x88 5. "FB5,Filter bits" "0,1" bitfld.long 0x88 4. "FB4,Filter bits" "0,1" bitfld.long 0x88 3. "FB3,Filter bits" "0,1" bitfld.long 0x88 2. "FB2,Filter bits" "0,1" bitfld.long 0x88 1. "FB1,Filter bits" "0,1" bitfld.long 0x88 0. "FB0,Filter bits" "0,1" line.long 0x8C "F17R2,Filter bank 17 register 2" bitfld.long 0x8C 31. "FB31,Filter bits" "0,1" bitfld.long 0x8C 30. "FB30,Filter bits" "0,1" bitfld.long 0x8C 29. "FB29,Filter bits" "0,1" bitfld.long 0x8C 28. "FB28,Filter bits" "0,1" bitfld.long 0x8C 27. "FB27,Filter bits" "0,1" bitfld.long 0x8C 26. "FB26,Filter bits" "0,1" bitfld.long 0x8C 25. "FB25,Filter bits" "0,1" bitfld.long 0x8C 24. "FB24,Filter bits" "0,1" bitfld.long 0x8C 23. "FB23,Filter bits" "0,1" bitfld.long 0x8C 22. "FB22,Filter bits" "0,1" bitfld.long 0x8C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x8C 20. "FB20,Filter bits" "0,1" bitfld.long 0x8C 19. "FB19,Filter bits" "0,1" bitfld.long 0x8C 18. "FB18,Filter bits" "0,1" bitfld.long 0x8C 17. "FB17,Filter bits" "0,1" bitfld.long 0x8C 16. "FB16,Filter bits" "0,1" bitfld.long 0x8C 15. "FB15,Filter bits" "0,1" bitfld.long 0x8C 14. "FB14,Filter bits" "0,1" bitfld.long 0x8C 13. "FB13,Filter bits" "0,1" bitfld.long 0x8C 12. "FB12,Filter bits" "0,1" bitfld.long 0x8C 11. "FB11,Filter bits" "0,1" bitfld.long 0x8C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x8C 9. "FB9,Filter bits" "0,1" bitfld.long 0x8C 8. "FB8,Filter bits" "0,1" bitfld.long 0x8C 7. "FB7,Filter bits" "0,1" bitfld.long 0x8C 6. "FB6,Filter bits" "0,1" bitfld.long 0x8C 5. "FB5,Filter bits" "0,1" bitfld.long 0x8C 4. "FB4,Filter bits" "0,1" bitfld.long 0x8C 3. "FB3,Filter bits" "0,1" bitfld.long 0x8C 2. "FB2,Filter bits" "0,1" bitfld.long 0x8C 1. "FB1,Filter bits" "0,1" bitfld.long 0x8C 0. "FB0,Filter bits" "0,1" line.long 0x90 "F18R1,Filter bank 18 register 1" bitfld.long 0x90 31. "FB31,Filter bits" "0,1" bitfld.long 0x90 30. "FB30,Filter bits" "0,1" bitfld.long 0x90 29. "FB29,Filter bits" "0,1" bitfld.long 0x90 28. "FB28,Filter bits" "0,1" bitfld.long 0x90 27. "FB27,Filter bits" "0,1" bitfld.long 0x90 26. "FB26,Filter bits" "0,1" bitfld.long 0x90 25. "FB25,Filter bits" "0,1" bitfld.long 0x90 24. "FB24,Filter bits" "0,1" bitfld.long 0x90 23. "FB23,Filter bits" "0,1" bitfld.long 0x90 22. "FB22,Filter bits" "0,1" bitfld.long 0x90 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x90 20. "FB20,Filter bits" "0,1" bitfld.long 0x90 19. "FB19,Filter bits" "0,1" bitfld.long 0x90 18. "FB18,Filter bits" "0,1" bitfld.long 0x90 17. "FB17,Filter bits" "0,1" bitfld.long 0x90 16. "FB16,Filter bits" "0,1" bitfld.long 0x90 15. "FB15,Filter bits" "0,1" bitfld.long 0x90 14. "FB14,Filter bits" "0,1" bitfld.long 0x90 13. "FB13,Filter bits" "0,1" bitfld.long 0x90 12. "FB12,Filter bits" "0,1" bitfld.long 0x90 11. "FB11,Filter bits" "0,1" bitfld.long 0x90 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x90 9. "FB9,Filter bits" "0,1" bitfld.long 0x90 8. "FB8,Filter bits" "0,1" bitfld.long 0x90 7. "FB7,Filter bits" "0,1" bitfld.long 0x90 6. "FB6,Filter bits" "0,1" bitfld.long 0x90 5. "FB5,Filter bits" "0,1" bitfld.long 0x90 4. "FB4,Filter bits" "0,1" bitfld.long 0x90 3. "FB3,Filter bits" "0,1" bitfld.long 0x90 2. "FB2,Filter bits" "0,1" bitfld.long 0x90 1. "FB1,Filter bits" "0,1" bitfld.long 0x90 0. "FB0,Filter bits" "0,1" line.long 0x94 "F18R2,Filter bank 18 register 2" bitfld.long 0x94 31. "FB31,Filter bits" "0,1" bitfld.long 0x94 30. "FB30,Filter bits" "0,1" bitfld.long 0x94 29. "FB29,Filter bits" "0,1" bitfld.long 0x94 28. "FB28,Filter bits" "0,1" bitfld.long 0x94 27. "FB27,Filter bits" "0,1" bitfld.long 0x94 26. "FB26,Filter bits" "0,1" bitfld.long 0x94 25. "FB25,Filter bits" "0,1" bitfld.long 0x94 24. "FB24,Filter bits" "0,1" bitfld.long 0x94 23. "FB23,Filter bits" "0,1" bitfld.long 0x94 22. "FB22,Filter bits" "0,1" bitfld.long 0x94 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x94 20. "FB20,Filter bits" "0,1" bitfld.long 0x94 19. "FB19,Filter bits" "0,1" bitfld.long 0x94 18. "FB18,Filter bits" "0,1" bitfld.long 0x94 17. "FB17,Filter bits" "0,1" bitfld.long 0x94 16. "FB16,Filter bits" "0,1" bitfld.long 0x94 15. "FB15,Filter bits" "0,1" bitfld.long 0x94 14. "FB14,Filter bits" "0,1" bitfld.long 0x94 13. "FB13,Filter bits" "0,1" bitfld.long 0x94 12. "FB12,Filter bits" "0,1" bitfld.long 0x94 11. "FB11,Filter bits" "0,1" bitfld.long 0x94 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x94 9. "FB9,Filter bits" "0,1" bitfld.long 0x94 8. "FB8,Filter bits" "0,1" bitfld.long 0x94 7. "FB7,Filter bits" "0,1" bitfld.long 0x94 6. "FB6,Filter bits" "0,1" bitfld.long 0x94 5. "FB5,Filter bits" "0,1" bitfld.long 0x94 4. "FB4,Filter bits" "0,1" bitfld.long 0x94 3. "FB3,Filter bits" "0,1" bitfld.long 0x94 2. "FB2,Filter bits" "0,1" bitfld.long 0x94 1. "FB1,Filter bits" "0,1" bitfld.long 0x94 0. "FB0,Filter bits" "0,1" line.long 0x98 "F19R1,Filter bank 19 register 1" bitfld.long 0x98 31. "FB31,Filter bits" "0,1" bitfld.long 0x98 30. "FB30,Filter bits" "0,1" bitfld.long 0x98 29. "FB29,Filter bits" "0,1" bitfld.long 0x98 28. "FB28,Filter bits" "0,1" bitfld.long 0x98 27. "FB27,Filter bits" "0,1" bitfld.long 0x98 26. "FB26,Filter bits" "0,1" bitfld.long 0x98 25. "FB25,Filter bits" "0,1" bitfld.long 0x98 24. "FB24,Filter bits" "0,1" bitfld.long 0x98 23. "FB23,Filter bits" "0,1" bitfld.long 0x98 22. "FB22,Filter bits" "0,1" bitfld.long 0x98 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x98 20. "FB20,Filter bits" "0,1" bitfld.long 0x98 19. "FB19,Filter bits" "0,1" bitfld.long 0x98 18. "FB18,Filter bits" "0,1" bitfld.long 0x98 17. "FB17,Filter bits" "0,1" bitfld.long 0x98 16. "FB16,Filter bits" "0,1" bitfld.long 0x98 15. "FB15,Filter bits" "0,1" bitfld.long 0x98 14. "FB14,Filter bits" "0,1" bitfld.long 0x98 13. "FB13,Filter bits" "0,1" bitfld.long 0x98 12. "FB12,Filter bits" "0,1" bitfld.long 0x98 11. "FB11,Filter bits" "0,1" bitfld.long 0x98 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x98 9. "FB9,Filter bits" "0,1" bitfld.long 0x98 8. "FB8,Filter bits" "0,1" bitfld.long 0x98 7. "FB7,Filter bits" "0,1" bitfld.long 0x98 6. "FB6,Filter bits" "0,1" bitfld.long 0x98 5. "FB5,Filter bits" "0,1" bitfld.long 0x98 4. "FB4,Filter bits" "0,1" bitfld.long 0x98 3. "FB3,Filter bits" "0,1" bitfld.long 0x98 2. "FB2,Filter bits" "0,1" bitfld.long 0x98 1. "FB1,Filter bits" "0,1" bitfld.long 0x98 0. "FB0,Filter bits" "0,1" line.long 0x9C "F19R2,Filter bank 19 register 2" bitfld.long 0x9C 31. "FB31,Filter bits" "0,1" bitfld.long 0x9C 30. "FB30,Filter bits" "0,1" bitfld.long 0x9C 29. "FB29,Filter bits" "0,1" bitfld.long 0x9C 28. "FB28,Filter bits" "0,1" bitfld.long 0x9C 27. "FB27,Filter bits" "0,1" bitfld.long 0x9C 26. "FB26,Filter bits" "0,1" bitfld.long 0x9C 25. "FB25,Filter bits" "0,1" bitfld.long 0x9C 24. "FB24,Filter bits" "0,1" bitfld.long 0x9C 23. "FB23,Filter bits" "0,1" bitfld.long 0x9C 22. "FB22,Filter bits" "0,1" bitfld.long 0x9C 21. "FB21,Filter bits" "0,1" newline bitfld.long 0x9C 20. "FB20,Filter bits" "0,1" bitfld.long 0x9C 19. "FB19,Filter bits" "0,1" bitfld.long 0x9C 18. "FB18,Filter bits" "0,1" bitfld.long 0x9C 17. "FB17,Filter bits" "0,1" bitfld.long 0x9C 16. "FB16,Filter bits" "0,1" bitfld.long 0x9C 15. "FB15,Filter bits" "0,1" bitfld.long 0x9C 14. "FB14,Filter bits" "0,1" bitfld.long 0x9C 13. "FB13,Filter bits" "0,1" bitfld.long 0x9C 12. "FB12,Filter bits" "0,1" bitfld.long 0x9C 11. "FB11,Filter bits" "0,1" bitfld.long 0x9C 10. "FB10,Filter bits" "0,1" newline bitfld.long 0x9C 9. "FB9,Filter bits" "0,1" bitfld.long 0x9C 8. "FB8,Filter bits" "0,1" bitfld.long 0x9C 7. "FB7,Filter bits" "0,1" bitfld.long 0x9C 6. "FB6,Filter bits" "0,1" bitfld.long 0x9C 5. "FB5,Filter bits" "0,1" bitfld.long 0x9C 4. "FB4,Filter bits" "0,1" bitfld.long 0x9C 3. "FB3,Filter bits" "0,1" bitfld.long 0x9C 2. "FB2,Filter bits" "0,1" bitfld.long 0x9C 1. "FB1,Filter bits" "0,1" bitfld.long 0x9C 0. "FB0,Filter bits" "0,1" line.long 0xA0 "F20R1,Filter bank 20 register 1" bitfld.long 0xA0 31. "FB31,Filter bits" "0,1" bitfld.long 0xA0 30. "FB30,Filter bits" "0,1" bitfld.long 0xA0 29. "FB29,Filter bits" "0,1" bitfld.long 0xA0 28. "FB28,Filter bits" "0,1" bitfld.long 0xA0 27. "FB27,Filter bits" "0,1" bitfld.long 0xA0 26. "FB26,Filter bits" "0,1" bitfld.long 0xA0 25. "FB25,Filter bits" "0,1" bitfld.long 0xA0 24. "FB24,Filter bits" "0,1" bitfld.long 0xA0 23. "FB23,Filter bits" "0,1" bitfld.long 0xA0 22. "FB22,Filter bits" "0,1" bitfld.long 0xA0 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xA0 20. "FB20,Filter bits" "0,1" bitfld.long 0xA0 19. "FB19,Filter bits" "0,1" bitfld.long 0xA0 18. "FB18,Filter bits" "0,1" bitfld.long 0xA0 17. "FB17,Filter bits" "0,1" bitfld.long 0xA0 16. "FB16,Filter bits" "0,1" bitfld.long 0xA0 15. "FB15,Filter bits" "0,1" bitfld.long 0xA0 14. "FB14,Filter bits" "0,1" bitfld.long 0xA0 13. "FB13,Filter bits" "0,1" bitfld.long 0xA0 12. "FB12,Filter bits" "0,1" bitfld.long 0xA0 11. "FB11,Filter bits" "0,1" bitfld.long 0xA0 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xA0 9. "FB9,Filter bits" "0,1" bitfld.long 0xA0 8. "FB8,Filter bits" "0,1" bitfld.long 0xA0 7. "FB7,Filter bits" "0,1" bitfld.long 0xA0 6. "FB6,Filter bits" "0,1" bitfld.long 0xA0 5. "FB5,Filter bits" "0,1" bitfld.long 0xA0 4. "FB4,Filter bits" "0,1" bitfld.long 0xA0 3. "FB3,Filter bits" "0,1" bitfld.long 0xA0 2. "FB2,Filter bits" "0,1" bitfld.long 0xA0 1. "FB1,Filter bits" "0,1" bitfld.long 0xA0 0. "FB0,Filter bits" "0,1" line.long 0xA4 "F20R2,Filter bank 20 register 2" bitfld.long 0xA4 31. "FB31,Filter bits" "0,1" bitfld.long 0xA4 30. "FB30,Filter bits" "0,1" bitfld.long 0xA4 29. "FB29,Filter bits" "0,1" bitfld.long 0xA4 28. "FB28,Filter bits" "0,1" bitfld.long 0xA4 27. "FB27,Filter bits" "0,1" bitfld.long 0xA4 26. "FB26,Filter bits" "0,1" bitfld.long 0xA4 25. "FB25,Filter bits" "0,1" bitfld.long 0xA4 24. "FB24,Filter bits" "0,1" bitfld.long 0xA4 23. "FB23,Filter bits" "0,1" bitfld.long 0xA4 22. "FB22,Filter bits" "0,1" bitfld.long 0xA4 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xA4 20. "FB20,Filter bits" "0,1" bitfld.long 0xA4 19. "FB19,Filter bits" "0,1" bitfld.long 0xA4 18. "FB18,Filter bits" "0,1" bitfld.long 0xA4 17. "FB17,Filter bits" "0,1" bitfld.long 0xA4 16. "FB16,Filter bits" "0,1" bitfld.long 0xA4 15. "FB15,Filter bits" "0,1" bitfld.long 0xA4 14. "FB14,Filter bits" "0,1" bitfld.long 0xA4 13. "FB13,Filter bits" "0,1" bitfld.long 0xA4 12. "FB12,Filter bits" "0,1" bitfld.long 0xA4 11. "FB11,Filter bits" "0,1" bitfld.long 0xA4 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xA4 9. "FB9,Filter bits" "0,1" bitfld.long 0xA4 8. "FB8,Filter bits" "0,1" bitfld.long 0xA4 7. "FB7,Filter bits" "0,1" bitfld.long 0xA4 6. "FB6,Filter bits" "0,1" bitfld.long 0xA4 5. "FB5,Filter bits" "0,1" bitfld.long 0xA4 4. "FB4,Filter bits" "0,1" bitfld.long 0xA4 3. "FB3,Filter bits" "0,1" bitfld.long 0xA4 2. "FB2,Filter bits" "0,1" bitfld.long 0xA4 1. "FB1,Filter bits" "0,1" bitfld.long 0xA4 0. "FB0,Filter bits" "0,1" line.long 0xA8 "F21R1,Filter bank 21 register 1" bitfld.long 0xA8 31. "FB31,Filter bits" "0,1" bitfld.long 0xA8 30. "FB30,Filter bits" "0,1" bitfld.long 0xA8 29. "FB29,Filter bits" "0,1" bitfld.long 0xA8 28. "FB28,Filter bits" "0,1" bitfld.long 0xA8 27. "FB27,Filter bits" "0,1" bitfld.long 0xA8 26. "FB26,Filter bits" "0,1" bitfld.long 0xA8 25. "FB25,Filter bits" "0,1" bitfld.long 0xA8 24. "FB24,Filter bits" "0,1" bitfld.long 0xA8 23. "FB23,Filter bits" "0,1" bitfld.long 0xA8 22. "FB22,Filter bits" "0,1" bitfld.long 0xA8 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xA8 20. "FB20,Filter bits" "0,1" bitfld.long 0xA8 19. "FB19,Filter bits" "0,1" bitfld.long 0xA8 18. "FB18,Filter bits" "0,1" bitfld.long 0xA8 17. "FB17,Filter bits" "0,1" bitfld.long 0xA8 16. "FB16,Filter bits" "0,1" bitfld.long 0xA8 15. "FB15,Filter bits" "0,1" bitfld.long 0xA8 14. "FB14,Filter bits" "0,1" bitfld.long 0xA8 13. "FB13,Filter bits" "0,1" bitfld.long 0xA8 12. "FB12,Filter bits" "0,1" bitfld.long 0xA8 11. "FB11,Filter bits" "0,1" bitfld.long 0xA8 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xA8 9. "FB9,Filter bits" "0,1" bitfld.long 0xA8 8. "FB8,Filter bits" "0,1" bitfld.long 0xA8 7. "FB7,Filter bits" "0,1" bitfld.long 0xA8 6. "FB6,Filter bits" "0,1" bitfld.long 0xA8 5. "FB5,Filter bits" "0,1" bitfld.long 0xA8 4. "FB4,Filter bits" "0,1" bitfld.long 0xA8 3. "FB3,Filter bits" "0,1" bitfld.long 0xA8 2. "FB2,Filter bits" "0,1" bitfld.long 0xA8 1. "FB1,Filter bits" "0,1" bitfld.long 0xA8 0. "FB0,Filter bits" "0,1" line.long 0xAC "F21R2,Filter bank 21 register 2" bitfld.long 0xAC 31. "FB31,Filter bits" "0,1" bitfld.long 0xAC 30. "FB30,Filter bits" "0,1" bitfld.long 0xAC 29. "FB29,Filter bits" "0,1" bitfld.long 0xAC 28. "FB28,Filter bits" "0,1" bitfld.long 0xAC 27. "FB27,Filter bits" "0,1" bitfld.long 0xAC 26. "FB26,Filter bits" "0,1" bitfld.long 0xAC 25. "FB25,Filter bits" "0,1" bitfld.long 0xAC 24. "FB24,Filter bits" "0,1" bitfld.long 0xAC 23. "FB23,Filter bits" "0,1" bitfld.long 0xAC 22. "FB22,Filter bits" "0,1" bitfld.long 0xAC 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xAC 20. "FB20,Filter bits" "0,1" bitfld.long 0xAC 19. "FB19,Filter bits" "0,1" bitfld.long 0xAC 18. "FB18,Filter bits" "0,1" bitfld.long 0xAC 17. "FB17,Filter bits" "0,1" bitfld.long 0xAC 16. "FB16,Filter bits" "0,1" bitfld.long 0xAC 15. "FB15,Filter bits" "0,1" bitfld.long 0xAC 14. "FB14,Filter bits" "0,1" bitfld.long 0xAC 13. "FB13,Filter bits" "0,1" bitfld.long 0xAC 12. "FB12,Filter bits" "0,1" bitfld.long 0xAC 11. "FB11,Filter bits" "0,1" bitfld.long 0xAC 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xAC 9. "FB9,Filter bits" "0,1" bitfld.long 0xAC 8. "FB8,Filter bits" "0,1" bitfld.long 0xAC 7. "FB7,Filter bits" "0,1" bitfld.long 0xAC 6. "FB6,Filter bits" "0,1" bitfld.long 0xAC 5. "FB5,Filter bits" "0,1" bitfld.long 0xAC 4. "FB4,Filter bits" "0,1" bitfld.long 0xAC 3. "FB3,Filter bits" "0,1" bitfld.long 0xAC 2. "FB2,Filter bits" "0,1" bitfld.long 0xAC 1. "FB1,Filter bits" "0,1" bitfld.long 0xAC 0. "FB0,Filter bits" "0,1" line.long 0xB0 "F22R1,Filter bank 22 register 1" bitfld.long 0xB0 31. "FB31,Filter bits" "0,1" bitfld.long 0xB0 30. "FB30,Filter bits" "0,1" bitfld.long 0xB0 29. "FB29,Filter bits" "0,1" bitfld.long 0xB0 28. "FB28,Filter bits" "0,1" bitfld.long 0xB0 27. "FB27,Filter bits" "0,1" bitfld.long 0xB0 26. "FB26,Filter bits" "0,1" bitfld.long 0xB0 25. "FB25,Filter bits" "0,1" bitfld.long 0xB0 24. "FB24,Filter bits" "0,1" bitfld.long 0xB0 23. "FB23,Filter bits" "0,1" bitfld.long 0xB0 22. "FB22,Filter bits" "0,1" bitfld.long 0xB0 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xB0 20. "FB20,Filter bits" "0,1" bitfld.long 0xB0 19. "FB19,Filter bits" "0,1" bitfld.long 0xB0 18. "FB18,Filter bits" "0,1" bitfld.long 0xB0 17. "FB17,Filter bits" "0,1" bitfld.long 0xB0 16. "FB16,Filter bits" "0,1" bitfld.long 0xB0 15. "FB15,Filter bits" "0,1" bitfld.long 0xB0 14. "FB14,Filter bits" "0,1" bitfld.long 0xB0 13. "FB13,Filter bits" "0,1" bitfld.long 0xB0 12. "FB12,Filter bits" "0,1" bitfld.long 0xB0 11. "FB11,Filter bits" "0,1" bitfld.long 0xB0 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xB0 9. "FB9,Filter bits" "0,1" bitfld.long 0xB0 8. "FB8,Filter bits" "0,1" bitfld.long 0xB0 7. "FB7,Filter bits" "0,1" bitfld.long 0xB0 6. "FB6,Filter bits" "0,1" bitfld.long 0xB0 5. "FB5,Filter bits" "0,1" bitfld.long 0xB0 4. "FB4,Filter bits" "0,1" bitfld.long 0xB0 3. "FB3,Filter bits" "0,1" bitfld.long 0xB0 2. "FB2,Filter bits" "0,1" bitfld.long 0xB0 1. "FB1,Filter bits" "0,1" bitfld.long 0xB0 0. "FB0,Filter bits" "0,1" line.long 0xB4 "F22R2,Filter bank 22 register 2" bitfld.long 0xB4 31. "FB31,Filter bits" "0,1" bitfld.long 0xB4 30. "FB30,Filter bits" "0,1" bitfld.long 0xB4 29. "FB29,Filter bits" "0,1" bitfld.long 0xB4 28. "FB28,Filter bits" "0,1" bitfld.long 0xB4 27. "FB27,Filter bits" "0,1" bitfld.long 0xB4 26. "FB26,Filter bits" "0,1" bitfld.long 0xB4 25. "FB25,Filter bits" "0,1" bitfld.long 0xB4 24. "FB24,Filter bits" "0,1" bitfld.long 0xB4 23. "FB23,Filter bits" "0,1" bitfld.long 0xB4 22. "FB22,Filter bits" "0,1" bitfld.long 0xB4 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xB4 20. "FB20,Filter bits" "0,1" bitfld.long 0xB4 19. "FB19,Filter bits" "0,1" bitfld.long 0xB4 18. "FB18,Filter bits" "0,1" bitfld.long 0xB4 17. "FB17,Filter bits" "0,1" bitfld.long 0xB4 16. "FB16,Filter bits" "0,1" bitfld.long 0xB4 15. "FB15,Filter bits" "0,1" bitfld.long 0xB4 14. "FB14,Filter bits" "0,1" bitfld.long 0xB4 13. "FB13,Filter bits" "0,1" bitfld.long 0xB4 12. "FB12,Filter bits" "0,1" bitfld.long 0xB4 11. "FB11,Filter bits" "0,1" bitfld.long 0xB4 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xB4 9. "FB9,Filter bits" "0,1" bitfld.long 0xB4 8. "FB8,Filter bits" "0,1" bitfld.long 0xB4 7. "FB7,Filter bits" "0,1" bitfld.long 0xB4 6. "FB6,Filter bits" "0,1" bitfld.long 0xB4 5. "FB5,Filter bits" "0,1" bitfld.long 0xB4 4. "FB4,Filter bits" "0,1" bitfld.long 0xB4 3. "FB3,Filter bits" "0,1" bitfld.long 0xB4 2. "FB2,Filter bits" "0,1" bitfld.long 0xB4 1. "FB1,Filter bits" "0,1" bitfld.long 0xB4 0. "FB0,Filter bits" "0,1" line.long 0xB8 "F23R1,Filter bank 23 register 1" bitfld.long 0xB8 31. "FB31,Filter bits" "0,1" bitfld.long 0xB8 30. "FB30,Filter bits" "0,1" bitfld.long 0xB8 29. "FB29,Filter bits" "0,1" bitfld.long 0xB8 28. "FB28,Filter bits" "0,1" bitfld.long 0xB8 27. "FB27,Filter bits" "0,1" bitfld.long 0xB8 26. "FB26,Filter bits" "0,1" bitfld.long 0xB8 25. "FB25,Filter bits" "0,1" bitfld.long 0xB8 24. "FB24,Filter bits" "0,1" bitfld.long 0xB8 23. "FB23,Filter bits" "0,1" bitfld.long 0xB8 22. "FB22,Filter bits" "0,1" bitfld.long 0xB8 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xB8 20. "FB20,Filter bits" "0,1" bitfld.long 0xB8 19. "FB19,Filter bits" "0,1" bitfld.long 0xB8 18. "FB18,Filter bits" "0,1" bitfld.long 0xB8 17. "FB17,Filter bits" "0,1" bitfld.long 0xB8 16. "FB16,Filter bits" "0,1" bitfld.long 0xB8 15. "FB15,Filter bits" "0,1" bitfld.long 0xB8 14. "FB14,Filter bits" "0,1" bitfld.long 0xB8 13. "FB13,Filter bits" "0,1" bitfld.long 0xB8 12. "FB12,Filter bits" "0,1" bitfld.long 0xB8 11. "FB11,Filter bits" "0,1" bitfld.long 0xB8 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xB8 9. "FB9,Filter bits" "0,1" bitfld.long 0xB8 8. "FB8,Filter bits" "0,1" bitfld.long 0xB8 7. "FB7,Filter bits" "0,1" bitfld.long 0xB8 6. "FB6,Filter bits" "0,1" bitfld.long 0xB8 5. "FB5,Filter bits" "0,1" bitfld.long 0xB8 4. "FB4,Filter bits" "0,1" bitfld.long 0xB8 3. "FB3,Filter bits" "0,1" bitfld.long 0xB8 2. "FB2,Filter bits" "0,1" bitfld.long 0xB8 1. "FB1,Filter bits" "0,1" bitfld.long 0xB8 0. "FB0,Filter bits" "0,1" line.long 0xBC "F23R2,Filter bank 23 register 2" bitfld.long 0xBC 31. "FB31,Filter bits" "0,1" bitfld.long 0xBC 30. "FB30,Filter bits" "0,1" bitfld.long 0xBC 29. "FB29,Filter bits" "0,1" bitfld.long 0xBC 28. "FB28,Filter bits" "0,1" bitfld.long 0xBC 27. "FB27,Filter bits" "0,1" bitfld.long 0xBC 26. "FB26,Filter bits" "0,1" bitfld.long 0xBC 25. "FB25,Filter bits" "0,1" bitfld.long 0xBC 24. "FB24,Filter bits" "0,1" bitfld.long 0xBC 23. "FB23,Filter bits" "0,1" bitfld.long 0xBC 22. "FB22,Filter bits" "0,1" bitfld.long 0xBC 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xBC 20. "FB20,Filter bits" "0,1" bitfld.long 0xBC 19. "FB19,Filter bits" "0,1" bitfld.long 0xBC 18. "FB18,Filter bits" "0,1" bitfld.long 0xBC 17. "FB17,Filter bits" "0,1" bitfld.long 0xBC 16. "FB16,Filter bits" "0,1" bitfld.long 0xBC 15. "FB15,Filter bits" "0,1" bitfld.long 0xBC 14. "FB14,Filter bits" "0,1" bitfld.long 0xBC 13. "FB13,Filter bits" "0,1" bitfld.long 0xBC 12. "FB12,Filter bits" "0,1" bitfld.long 0xBC 11. "FB11,Filter bits" "0,1" bitfld.long 0xBC 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xBC 9. "FB9,Filter bits" "0,1" bitfld.long 0xBC 8. "FB8,Filter bits" "0,1" bitfld.long 0xBC 7. "FB7,Filter bits" "0,1" bitfld.long 0xBC 6. "FB6,Filter bits" "0,1" bitfld.long 0xBC 5. "FB5,Filter bits" "0,1" bitfld.long 0xBC 4. "FB4,Filter bits" "0,1" bitfld.long 0xBC 3. "FB3,Filter bits" "0,1" bitfld.long 0xBC 2. "FB2,Filter bits" "0,1" bitfld.long 0xBC 1. "FB1,Filter bits" "0,1" bitfld.long 0xBC 0. "FB0,Filter bits" "0,1" line.long 0xC0 "F24R1,Filter bank 24 register 1" bitfld.long 0xC0 31. "FB31,Filter bits" "0,1" bitfld.long 0xC0 30. "FB30,Filter bits" "0,1" bitfld.long 0xC0 29. "FB29,Filter bits" "0,1" bitfld.long 0xC0 28. "FB28,Filter bits" "0,1" bitfld.long 0xC0 27. "FB27,Filter bits" "0,1" bitfld.long 0xC0 26. "FB26,Filter bits" "0,1" bitfld.long 0xC0 25. "FB25,Filter bits" "0,1" bitfld.long 0xC0 24. "FB24,Filter bits" "0,1" bitfld.long 0xC0 23. "FB23,Filter bits" "0,1" bitfld.long 0xC0 22. "FB22,Filter bits" "0,1" bitfld.long 0xC0 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xC0 20. "FB20,Filter bits" "0,1" bitfld.long 0xC0 19. "FB19,Filter bits" "0,1" bitfld.long 0xC0 18. "FB18,Filter bits" "0,1" bitfld.long 0xC0 17. "FB17,Filter bits" "0,1" bitfld.long 0xC0 16. "FB16,Filter bits" "0,1" bitfld.long 0xC0 15. "FB15,Filter bits" "0,1" bitfld.long 0xC0 14. "FB14,Filter bits" "0,1" bitfld.long 0xC0 13. "FB13,Filter bits" "0,1" bitfld.long 0xC0 12. "FB12,Filter bits" "0,1" bitfld.long 0xC0 11. "FB11,Filter bits" "0,1" bitfld.long 0xC0 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xC0 9. "FB9,Filter bits" "0,1" bitfld.long 0xC0 8. "FB8,Filter bits" "0,1" bitfld.long 0xC0 7. "FB7,Filter bits" "0,1" bitfld.long 0xC0 6. "FB6,Filter bits" "0,1" bitfld.long 0xC0 5. "FB5,Filter bits" "0,1" bitfld.long 0xC0 4. "FB4,Filter bits" "0,1" bitfld.long 0xC0 3. "FB3,Filter bits" "0,1" bitfld.long 0xC0 2. "FB2,Filter bits" "0,1" bitfld.long 0xC0 1. "FB1,Filter bits" "0,1" bitfld.long 0xC0 0. "FB0,Filter bits" "0,1" line.long 0xC4 "F24R2,Filter bank 24 register 2" bitfld.long 0xC4 31. "FB31,Filter bits" "0,1" bitfld.long 0xC4 30. "FB30,Filter bits" "0,1" bitfld.long 0xC4 29. "FB29,Filter bits" "0,1" bitfld.long 0xC4 28. "FB28,Filter bits" "0,1" bitfld.long 0xC4 27. "FB27,Filter bits" "0,1" bitfld.long 0xC4 26. "FB26,Filter bits" "0,1" bitfld.long 0xC4 25. "FB25,Filter bits" "0,1" bitfld.long 0xC4 24. "FB24,Filter bits" "0,1" bitfld.long 0xC4 23. "FB23,Filter bits" "0,1" bitfld.long 0xC4 22. "FB22,Filter bits" "0,1" bitfld.long 0xC4 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xC4 20. "FB20,Filter bits" "0,1" bitfld.long 0xC4 19. "FB19,Filter bits" "0,1" bitfld.long 0xC4 18. "FB18,Filter bits" "0,1" bitfld.long 0xC4 17. "FB17,Filter bits" "0,1" bitfld.long 0xC4 16. "FB16,Filter bits" "0,1" bitfld.long 0xC4 15. "FB15,Filter bits" "0,1" bitfld.long 0xC4 14. "FB14,Filter bits" "0,1" bitfld.long 0xC4 13. "FB13,Filter bits" "0,1" bitfld.long 0xC4 12. "FB12,Filter bits" "0,1" bitfld.long 0xC4 11. "FB11,Filter bits" "0,1" bitfld.long 0xC4 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xC4 9. "FB9,Filter bits" "0,1" bitfld.long 0xC4 8. "FB8,Filter bits" "0,1" bitfld.long 0xC4 7. "FB7,Filter bits" "0,1" bitfld.long 0xC4 6. "FB6,Filter bits" "0,1" bitfld.long 0xC4 5. "FB5,Filter bits" "0,1" bitfld.long 0xC4 4. "FB4,Filter bits" "0,1" bitfld.long 0xC4 3. "FB3,Filter bits" "0,1" bitfld.long 0xC4 2. "FB2,Filter bits" "0,1" bitfld.long 0xC4 1. "FB1,Filter bits" "0,1" bitfld.long 0xC4 0. "FB0,Filter bits" "0,1" line.long 0xC8 "F25R1,Filter bank 25 register 1" bitfld.long 0xC8 31. "FB31,Filter bits" "0,1" bitfld.long 0xC8 30. "FB30,Filter bits" "0,1" bitfld.long 0xC8 29. "FB29,Filter bits" "0,1" bitfld.long 0xC8 28. "FB28,Filter bits" "0,1" bitfld.long 0xC8 27. "FB27,Filter bits" "0,1" bitfld.long 0xC8 26. "FB26,Filter bits" "0,1" bitfld.long 0xC8 25. "FB25,Filter bits" "0,1" bitfld.long 0xC8 24. "FB24,Filter bits" "0,1" bitfld.long 0xC8 23. "FB23,Filter bits" "0,1" bitfld.long 0xC8 22. "FB22,Filter bits" "0,1" bitfld.long 0xC8 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xC8 20. "FB20,Filter bits" "0,1" bitfld.long 0xC8 19. "FB19,Filter bits" "0,1" bitfld.long 0xC8 18. "FB18,Filter bits" "0,1" bitfld.long 0xC8 17. "FB17,Filter bits" "0,1" bitfld.long 0xC8 16. "FB16,Filter bits" "0,1" bitfld.long 0xC8 15. "FB15,Filter bits" "0,1" bitfld.long 0xC8 14. "FB14,Filter bits" "0,1" bitfld.long 0xC8 13. "FB13,Filter bits" "0,1" bitfld.long 0xC8 12. "FB12,Filter bits" "0,1" bitfld.long 0xC8 11. "FB11,Filter bits" "0,1" bitfld.long 0xC8 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xC8 9. "FB9,Filter bits" "0,1" bitfld.long 0xC8 8. "FB8,Filter bits" "0,1" bitfld.long 0xC8 7. "FB7,Filter bits" "0,1" bitfld.long 0xC8 6. "FB6,Filter bits" "0,1" bitfld.long 0xC8 5. "FB5,Filter bits" "0,1" bitfld.long 0xC8 4. "FB4,Filter bits" "0,1" bitfld.long 0xC8 3. "FB3,Filter bits" "0,1" bitfld.long 0xC8 2. "FB2,Filter bits" "0,1" bitfld.long 0xC8 1. "FB1,Filter bits" "0,1" bitfld.long 0xC8 0. "FB0,Filter bits" "0,1" line.long 0xCC "F25R2,Filter bank 25 register 2" bitfld.long 0xCC 31. "FB31,Filter bits" "0,1" bitfld.long 0xCC 30. "FB30,Filter bits" "0,1" bitfld.long 0xCC 29. "FB29,Filter bits" "0,1" bitfld.long 0xCC 28. "FB28,Filter bits" "0,1" bitfld.long 0xCC 27. "FB27,Filter bits" "0,1" bitfld.long 0xCC 26. "FB26,Filter bits" "0,1" bitfld.long 0xCC 25. "FB25,Filter bits" "0,1" bitfld.long 0xCC 24. "FB24,Filter bits" "0,1" bitfld.long 0xCC 23. "FB23,Filter bits" "0,1" bitfld.long 0xCC 22. "FB22,Filter bits" "0,1" bitfld.long 0xCC 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xCC 20. "FB20,Filter bits" "0,1" bitfld.long 0xCC 19. "FB19,Filter bits" "0,1" bitfld.long 0xCC 18. "FB18,Filter bits" "0,1" bitfld.long 0xCC 17. "FB17,Filter bits" "0,1" bitfld.long 0xCC 16. "FB16,Filter bits" "0,1" bitfld.long 0xCC 15. "FB15,Filter bits" "0,1" bitfld.long 0xCC 14. "FB14,Filter bits" "0,1" bitfld.long 0xCC 13. "FB13,Filter bits" "0,1" bitfld.long 0xCC 12. "FB12,Filter bits" "0,1" bitfld.long 0xCC 11. "FB11,Filter bits" "0,1" bitfld.long 0xCC 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xCC 9. "FB9,Filter bits" "0,1" bitfld.long 0xCC 8. "FB8,Filter bits" "0,1" bitfld.long 0xCC 7. "FB7,Filter bits" "0,1" bitfld.long 0xCC 6. "FB6,Filter bits" "0,1" bitfld.long 0xCC 5. "FB5,Filter bits" "0,1" bitfld.long 0xCC 4. "FB4,Filter bits" "0,1" bitfld.long 0xCC 3. "FB3,Filter bits" "0,1" bitfld.long 0xCC 2. "FB2,Filter bits" "0,1" bitfld.long 0xCC 1. "FB1,Filter bits" "0,1" bitfld.long 0xCC 0. "FB0,Filter bits" "0,1" line.long 0xD0 "F26R1,Filter bank 26 register 1" bitfld.long 0xD0 31. "FB31,Filter bits" "0,1" bitfld.long 0xD0 30. "FB30,Filter bits" "0,1" bitfld.long 0xD0 29. "FB29,Filter bits" "0,1" bitfld.long 0xD0 28. "FB28,Filter bits" "0,1" bitfld.long 0xD0 27. "FB27,Filter bits" "0,1" bitfld.long 0xD0 26. "FB26,Filter bits" "0,1" bitfld.long 0xD0 25. "FB25,Filter bits" "0,1" bitfld.long 0xD0 24. "FB24,Filter bits" "0,1" bitfld.long 0xD0 23. "FB23,Filter bits" "0,1" bitfld.long 0xD0 22. "FB22,Filter bits" "0,1" bitfld.long 0xD0 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xD0 20. "FB20,Filter bits" "0,1" bitfld.long 0xD0 19. "FB19,Filter bits" "0,1" bitfld.long 0xD0 18. "FB18,Filter bits" "0,1" bitfld.long 0xD0 17. "FB17,Filter bits" "0,1" bitfld.long 0xD0 16. "FB16,Filter bits" "0,1" bitfld.long 0xD0 15. "FB15,Filter bits" "0,1" bitfld.long 0xD0 14. "FB14,Filter bits" "0,1" bitfld.long 0xD0 13. "FB13,Filter bits" "0,1" bitfld.long 0xD0 12. "FB12,Filter bits" "0,1" bitfld.long 0xD0 11. "FB11,Filter bits" "0,1" bitfld.long 0xD0 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xD0 9. "FB9,Filter bits" "0,1" bitfld.long 0xD0 8. "FB8,Filter bits" "0,1" bitfld.long 0xD0 7. "FB7,Filter bits" "0,1" bitfld.long 0xD0 6. "FB6,Filter bits" "0,1" bitfld.long 0xD0 5. "FB5,Filter bits" "0,1" bitfld.long 0xD0 4. "FB4,Filter bits" "0,1" bitfld.long 0xD0 3. "FB3,Filter bits" "0,1" bitfld.long 0xD0 2. "FB2,Filter bits" "0,1" bitfld.long 0xD0 1. "FB1,Filter bits" "0,1" bitfld.long 0xD0 0. "FB0,Filter bits" "0,1" line.long 0xD4 "F26R2,Filter bank 26 register 2" bitfld.long 0xD4 31. "FB31,Filter bits" "0,1" bitfld.long 0xD4 30. "FB30,Filter bits" "0,1" bitfld.long 0xD4 29. "FB29,Filter bits" "0,1" bitfld.long 0xD4 28. "FB28,Filter bits" "0,1" bitfld.long 0xD4 27. "FB27,Filter bits" "0,1" bitfld.long 0xD4 26. "FB26,Filter bits" "0,1" bitfld.long 0xD4 25. "FB25,Filter bits" "0,1" bitfld.long 0xD4 24. "FB24,Filter bits" "0,1" bitfld.long 0xD4 23. "FB23,Filter bits" "0,1" bitfld.long 0xD4 22. "FB22,Filter bits" "0,1" bitfld.long 0xD4 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xD4 20. "FB20,Filter bits" "0,1" bitfld.long 0xD4 19. "FB19,Filter bits" "0,1" bitfld.long 0xD4 18. "FB18,Filter bits" "0,1" bitfld.long 0xD4 17. "FB17,Filter bits" "0,1" bitfld.long 0xD4 16. "FB16,Filter bits" "0,1" bitfld.long 0xD4 15. "FB15,Filter bits" "0,1" bitfld.long 0xD4 14. "FB14,Filter bits" "0,1" bitfld.long 0xD4 13. "FB13,Filter bits" "0,1" bitfld.long 0xD4 12. "FB12,Filter bits" "0,1" bitfld.long 0xD4 11. "FB11,Filter bits" "0,1" bitfld.long 0xD4 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xD4 9. "FB9,Filter bits" "0,1" bitfld.long 0xD4 8. "FB8,Filter bits" "0,1" bitfld.long 0xD4 7. "FB7,Filter bits" "0,1" bitfld.long 0xD4 6. "FB6,Filter bits" "0,1" bitfld.long 0xD4 5. "FB5,Filter bits" "0,1" bitfld.long 0xD4 4. "FB4,Filter bits" "0,1" bitfld.long 0xD4 3. "FB3,Filter bits" "0,1" bitfld.long 0xD4 2. "FB2,Filter bits" "0,1" bitfld.long 0xD4 1. "FB1,Filter bits" "0,1" bitfld.long 0xD4 0. "FB0,Filter bits" "0,1" line.long 0xD8 "F27R1,Filter bank 27 register 1" bitfld.long 0xD8 31. "FB31,Filter bits" "0,1" bitfld.long 0xD8 30. "FB30,Filter bits" "0,1" bitfld.long 0xD8 29. "FB29,Filter bits" "0,1" bitfld.long 0xD8 28. "FB28,Filter bits" "0,1" bitfld.long 0xD8 27. "FB27,Filter bits" "0,1" bitfld.long 0xD8 26. "FB26,Filter bits" "0,1" bitfld.long 0xD8 25. "FB25,Filter bits" "0,1" bitfld.long 0xD8 24. "FB24,Filter bits" "0,1" bitfld.long 0xD8 23. "FB23,Filter bits" "0,1" bitfld.long 0xD8 22. "FB22,Filter bits" "0,1" bitfld.long 0xD8 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xD8 20. "FB20,Filter bits" "0,1" bitfld.long 0xD8 19. "FB19,Filter bits" "0,1" bitfld.long 0xD8 18. "FB18,Filter bits" "0,1" bitfld.long 0xD8 17. "FB17,Filter bits" "0,1" bitfld.long 0xD8 16. "FB16,Filter bits" "0,1" bitfld.long 0xD8 15. "FB15,Filter bits" "0,1" bitfld.long 0xD8 14. "FB14,Filter bits" "0,1" bitfld.long 0xD8 13. "FB13,Filter bits" "0,1" bitfld.long 0xD8 12. "FB12,Filter bits" "0,1" bitfld.long 0xD8 11. "FB11,Filter bits" "0,1" bitfld.long 0xD8 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xD8 9. "FB9,Filter bits" "0,1" bitfld.long 0xD8 8. "FB8,Filter bits" "0,1" bitfld.long 0xD8 7. "FB7,Filter bits" "0,1" bitfld.long 0xD8 6. "FB6,Filter bits" "0,1" bitfld.long 0xD8 5. "FB5,Filter bits" "0,1" bitfld.long 0xD8 4. "FB4,Filter bits" "0,1" bitfld.long 0xD8 3. "FB3,Filter bits" "0,1" bitfld.long 0xD8 2. "FB2,Filter bits" "0,1" bitfld.long 0xD8 1. "FB1,Filter bits" "0,1" bitfld.long 0xD8 0. "FB0,Filter bits" "0,1" line.long 0xDC "F27R2,Filter bank 27 register 2" bitfld.long 0xDC 31. "FB31,Filter bits" "0,1" bitfld.long 0xDC 30. "FB30,Filter bits" "0,1" bitfld.long 0xDC 29. "FB29,Filter bits" "0,1" bitfld.long 0xDC 28. "FB28,Filter bits" "0,1" bitfld.long 0xDC 27. "FB27,Filter bits" "0,1" bitfld.long 0xDC 26. "FB26,Filter bits" "0,1" bitfld.long 0xDC 25. "FB25,Filter bits" "0,1" bitfld.long 0xDC 24. "FB24,Filter bits" "0,1" bitfld.long 0xDC 23. "FB23,Filter bits" "0,1" bitfld.long 0xDC 22. "FB22,Filter bits" "0,1" bitfld.long 0xDC 21. "FB21,Filter bits" "0,1" newline bitfld.long 0xDC 20. "FB20,Filter bits" "0,1" bitfld.long 0xDC 19. "FB19,Filter bits" "0,1" bitfld.long 0xDC 18. "FB18,Filter bits" "0,1" bitfld.long 0xDC 17. "FB17,Filter bits" "0,1" bitfld.long 0xDC 16. "FB16,Filter bits" "0,1" bitfld.long 0xDC 15. "FB15,Filter bits" "0,1" bitfld.long 0xDC 14. "FB14,Filter bits" "0,1" bitfld.long 0xDC 13. "FB13,Filter bits" "0,1" bitfld.long 0xDC 12. "FB12,Filter bits" "0,1" bitfld.long 0xDC 11. "FB11,Filter bits" "0,1" bitfld.long 0xDC 10. "FB10,Filter bits" "0,1" newline bitfld.long 0xDC 9. "FB9,Filter bits" "0,1" bitfld.long 0xDC 8. "FB8,Filter bits" "0,1" bitfld.long 0xDC 7. "FB7,Filter bits" "0,1" bitfld.long 0xDC 6. "FB6,Filter bits" "0,1" bitfld.long 0xDC 5. "FB5,Filter bits" "0,1" bitfld.long 0xDC 4. "FB4,Filter bits" "0,1" bitfld.long 0xDC 3. "FB3,Filter bits" "0,1" bitfld.long 0xDC 2. "FB2,Filter bits" "0,1" bitfld.long 0xDC 1. "FB1,Filter bits" "0,1" bitfld.long 0xDC 0. "FB0,Filter bits" "0,1" tree.end tree "CEC (HDMI-CEC Controller)" base ad:0x40007800 group.long 0x0++0x7 line.long 0x0 "CR,control register" bitfld.long 0x0 2. "TXEOM,Tx End Of Message" "0,1" bitfld.long 0x0 1. "TXSOM,Tx start of message" "0,1" bitfld.long 0x0 0. "CECEN,CEC Enable" "0,1" line.long 0x4 "CFGR,configuration register" bitfld.long 0x4 11. "LBPEGEN,Generate Error-Bit on Long Bit Period" "0,1" bitfld.long 0x4 10. "BREGEN,Generate error-bit on bit rising" "0,1" bitfld.long 0x4 9. "BRESTP,Rx-stop on bit rising" "0,1" bitfld.long 0x4 8. "RXTOL,Rx-Tolerance" "0,1" bitfld.long 0x4 5.--7. "SFT,Signal Free Time" "0,1,2,3,4,5,6,7" bitfld.long 0x4 4. "LSTN,Listen mode" "0,1" hexmask.long.byte 0x4 0.--3. 1. "OAR,Own Address" wgroup.long 0x8++0x3 line.long 0x0 "TXDR,Tx data register" hexmask.long.byte 0x0 0.--7. 1. "TXD,Tx Data register" rgroup.long 0xC++0x3 line.long 0x0 "RXDR,Rx Data Register" hexmask.long.byte 0x0 0.--7. 1. "RXDR,CEC Rx Data Register" group.long 0x10++0x7 line.long 0x0 "ISR,Interrupt and Status Register" bitfld.long 0x0 12. "TXACKE,Tx-Missing acknowledge" "0,1" bitfld.long 0x0 11. "TXERR,Tx-Error" "0,1" bitfld.long 0x0 10. "TXUDR,Tx-Buffer Underrun" "0,1" bitfld.long 0x0 9. "TXEND,End of Transmission" "0,1" bitfld.long 0x0 8. "TXBR,Tx-Byte Request" "0,1" bitfld.long 0x0 7. "ARBLST,Arbitration Lost" "0,1" bitfld.long 0x0 6. "RXACKE,Rx-Missing Acknowledge" "0,1" bitfld.long 0x0 5. "LBPE,Rx-Long Bit Period Error" "0,1" bitfld.long 0x0 4. "SBPE,Rx-Short Bit period error" "0,1" bitfld.long 0x0 3. "BRE,Rx-Bit rising error" "0,1" bitfld.long 0x0 2. "RXOVR,Rx-Overrun" "0,1" newline bitfld.long 0x0 1. "RXEND,End Of Reception" "0,1" bitfld.long 0x0 0. "RXBR,Rx-Byte Received" "0,1" line.long 0x4 "IER,interrupt enable register" bitfld.long 0x4 12. "TXACKIE,Tx-Missing Acknowledge Error Interrupt" "0,1" bitfld.long 0x4 11. "TXERRIE,Tx-Error Interrupt Enable" "0,1" bitfld.long 0x4 10. "TXUDRIE,Tx-Underrun interrupt" "0,1" bitfld.long 0x4 9. "TXENDIE,Tx-End of message interrupt" "0,1" bitfld.long 0x4 8. "TXBRIE,Tx-Byte Request Interrupt" "0,1" bitfld.long 0x4 7. "ARBLSTIE,Arbitration Lost Interrupt" "0,1" bitfld.long 0x4 6. "RXACKIE,Rx-Missing Acknowledge Error Interrupt" "0,1" bitfld.long 0x4 5. "LBPEIE,Long Bit Period Error Interrupt" "0,1" bitfld.long 0x4 4. "SBPEIE,Short Bit Period Error Interrupt" "0,1" bitfld.long 0x4 3. "BREIE,Bit Rising Error Interrupt" "0,1" bitfld.long 0x4 2. "RXOVRIE,Rx-Buffer Overrun Interrupt" "0,1" newline bitfld.long 0x4 1. "RXENDIE,End Of Reception Interrupt" "0,1" bitfld.long 0x4 0. "RXBRIE,Rx-Byte Received Interrupt" "0,1" tree.end endif tree "COMP (Comparator)" base ad:0x4001001C group.long 0x0++0x3 line.long 0x0 "CSR,control and status register" bitfld.long 0x0 31. "COMP2LOCK,Comparator 2 lock" "0,1" rbitfld.long 0x0 30. "COMP2OUT,Comparator 2 output" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 28.--29. "COMP2HYST,Comparator 2 hysteresis" "0,1,2,3" endif newline bitfld.long 0x0 27. "COMP2POL,Comparator 2 output" "0,1" bitfld.long 0x0 24.--26. "COMP2OUTSEL,Comparator 2 output" "0,1,2,3,4,5,6,7" bitfld.long 0x0 23. "WNDWEN,Window mode enable" "0,1" newline sif (cpuis("FT32F0??*")) bitfld.long 0x0 20.--21. "COMP2VINSEL,Comparator 2 inverting input" "0,1,2,3" bitfld.long 0x0 17.--19. "COMP2VIPSEL,Comparator 2 mode" "0,1,2,3,4,5,6,7" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 20.--22. "COMP2INSEL,Comparator 2 inverting input" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 18.--19. "COMP2MODE,Comparator 2 mode" "0,1,2,3" endif sif (cpuis("FT32F0??*")) bitfld.long 0x0 19.--20. "COMP2VINSEL,Comparator 2 inverting input" "0,1,2,3" bitfld.long 0x0 17.--18. "COMP2VIPSEL,Comparator 2 mode" "0,1,2,3" bitfld.long 0x0 14. "COMP1OUT,Comparator 1 hysteresis" "0,1" newline bitfld.long 0x0 9.--10. "COMP1OUTSEL,Comparator 1 inverting input" "0,1,2,3" bitfld.long 0x0 4.--5. "COMP1VINSEL,Comparator 1 mode" "0,1,2,3" bitfld.long 0x0 1.--3. "COMP1VIPSEL,COMP1VIPSEL" "0,1,2,3,4,5,6,7" endif newline bitfld.long 0x0 16. "COMP2EN,Comparator 2 enable" "0,1" bitfld.long 0x0 15. "COMP1LOCK,Comparator 1 lock" "0,1" newline sif (cpuis("FT32F072?*")) rbitfld.long 0x0 14. "COMP1OUT,Comparator 1 output" "0,1" bitfld.long 0x0 12.--13. "COMP1HYST,Comparator 1 hysteresis" "0,1,2,3" endif bitfld.long 0x0 11. "COMP1POL,Comparator 1 output" "0,1" newline sif (cpuis("FT32F072?*")) bitfld.long 0x0 8.--10. "COMP1OUTSEL,Comparator 1 output" "0,1,2,3,4,5,6,7" newline endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 4.--6. "COMP1INSEL,Comparator 1 inverting input" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2.--3. "COMP1MODE,Comparator 1 mode" "0,1,2,3" bitfld.long 0x0 1. "COMP1_INP_DAC,COMP1_INP_DAC" "0,1" newline endif bitfld.long 0x0 0. "COMP1EN,Comparator 1 enable" "0,1" sif (cpuis("FT32F0??*")) group.long 0x4++0xF line.long 0x0 "DACCTRL,DACCTRL register" bitfld.long 0x0 4. "DAC2BOE,DAC2BOE" "0,1" bitfld.long 0x0 3. "DAC1BOE,DAC1BOE" "0,1" newline bitfld.long 0x0 1.--2. "DACREFSEL,DACREFSEL" "0,1,2,3" bitfld.long 0x0 0. "DACEN,DACEN" "0,1" line.long 0x4 "DAC1DATA,DAC1DATA register" hexmask.long.byte 0x4 0.--6. 1. "DAC1DATA,DAC1DATA" line.long 0x8 "DAC2DATA,DAC2DATA register" hexmask.long.byte 0x8 0.--6. 1. "DAC2DATA,DAC2DATA" line.long 0xC "CSR2,control and status register" bitfld.long 0xC 15. "COMP3LOCK,Comparator 1 lock" "0,1" bitfld.long 0xC 14. "COMP3OUT,Comparator 1 hysteresis" "0,1" newline bitfld.long 0xC 11. "COMP3POL,Comparator 1 output" "0,1" bitfld.long 0xC 9.--10. "COMP3OUTSEL,Comparator 1 inverting input" "0,1,2,3" newline bitfld.long 0xC 8.--10. "COMP3OUTSEL,Comparator 1 inverting input" "0,1,2,3,4,5,6,7" bitfld.long 0xC 4.--5. "COMP3VINSEL,Comparator 1 mode" "0,1,2,3" newline bitfld.long 0xC 1.--2. "COMP3VIPSEL,COMP1VIPSEL" "0,1,2,3" bitfld.long 0xC 0. "COMP3EN,Comparator 1 enable" "0,1" endif tree.end tree "CRC (Cyclic Redundancy Check)" base ad:0x40023000 group.long 0x0++0xF line.long 0x0 "DR,Data register" hexmask.long 0x0 0.--31. 1. "DR,Data register bits" line.long 0x4 "IDR,Independent data register" hexmask.long.byte 0x4 0.--7. 1. "IDR,General-purpose 8-bit data register" line.long 0x8 "CR,Control register" bitfld.long 0x8 7. "REV_OUT,Reverse output data" "0,1" bitfld.long 0x8 5.--6. "REV_IN,Reverse input data" "0,1,2,3" bitfld.long 0x8 0. "RESET,reset bit" "0,1" line.long 0xC "INIT,Initial CRC value" hexmask.long 0xC 0.--31. 1. "INIT,Programmable initial CRC" tree.end sif (cpuis("FT32F072?*")) tree "CRS (Clock Recovery System)" base ad:0x40006C00 group.long 0x0++0x7 line.long 0x0 "CR,control register" hexmask.long.byte 0x0 8.--13. 1. "TRIM,HSI48 oscillator smooth" bitfld.long 0x0 7. "SWSYNC,Generate software SYNC" "0,1" bitfld.long 0x0 6. "AUTOTRIMEN,Automatic trimming enable" "0,1" bitfld.long 0x0 5. "CEN,Frequency error counter" "0,1" bitfld.long 0x0 3. "ESYNCIE,Expected SYNC interrupt" "0,1" bitfld.long 0x0 2. "ERRIE,Synchronization or trimming error" "0,1" bitfld.long 0x0 1. "SYNCWARNIE,SYNC warning interrupt" "0,1" bitfld.long 0x0 0. "SYNCOKIE,SYNC event OK interrupt" "0,1" line.long 0x4 "CFGR,configuration register" bitfld.long 0x4 31. "SYNCPOL,SYNC polarity selection" "0,1" bitfld.long 0x4 28.--29. "SYNCSRC,SYNC signal source" "0,1,2,3" bitfld.long 0x4 24.--26. "SYNCDIV,SYNC divider" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x4 16.--23. 1. "FELIM,Frequency error limit" hexmask.long.word 0x4 0.--15. 1. "RELOAD,Counter reload value" rgroup.long 0x8++0x3 line.long 0x0 "ISR,interrupt and status register" hexmask.long.word 0x0 16.--31. 1. "FECAP,Frequency error capture" bitfld.long 0x0 15. "FEDIR,Frequency error direction" "0,1" bitfld.long 0x0 10. "TRIMOVF,Trimming overflow or" "0,1" bitfld.long 0x0 9. "SYNCMISS,SYNC missed" "0,1" bitfld.long 0x0 8. "SYNCERR,SYNC error" "0,1" bitfld.long 0x0 3. "ESYNCF,Expected SYNC flag" "0,1" bitfld.long 0x0 2. "ERRF,Error flag" "0,1" bitfld.long 0x0 1. "SYNCWARNF,SYNC warning flag" "0,1" bitfld.long 0x0 0. "SYNCOKF,SYNC event OK flag" "0,1" group.long 0xC++0x3 line.long 0x0 "ICR,interrupt flag clear register" bitfld.long 0x0 3. "ESYNCC,Expected SYNC clear flag" "0,1" bitfld.long 0x0 2. "ERRC,Error clear flag" "0,1" bitfld.long 0x0 1. "SYNCWARNC,SYNC warning clear flag" "0,1" bitfld.long 0x0 0. "SYNCOKC,SYNC event OK clear flag" "0,1" tree.end tree "DAC (Digital to Analog Converter)" base ad:0x40007400 group.long 0x0++0x3 line.long 0x0 "CR,control register" bitfld.long 0x0 13. "DMAUDRIE1,DAC channel1 DMA Underrun Interrupt" "0,1" bitfld.long 0x0 12. "DMAEN1,DAC channel1 DMA enable" "0,1" bitfld.long 0x0 5. "TSEL12,DAC channel1 trigger" "0,1" bitfld.long 0x0 4. "TSEL11,DAC channel1 trigger" "0,1" bitfld.long 0x0 3. "TSEL10,DAC channel1 trigger" "0,1" bitfld.long 0x0 2. "TEN1,DAC channel1 trigger" "0,1" bitfld.long 0x0 1. "BOFF1,DAC channel1 output buffer" "0,1" bitfld.long 0x0 0. "EN1,DAC channel1 enable" "0,1" wgroup.long 0x4++0x3 line.long 0x0 "SWTRIGR,software trigger register" bitfld.long 0x0 0. "SWTRIG1,DAC channel1 software" "0,1" group.long 0x8++0xB line.long 0x0 "DHR12R1,channel1 12-bit right-aligned data holding" hexmask.long.word 0x0 0.--11. 1. "DACC1DHR,DAC channel1 12-bit right-aligned" line.long 0x4 "DHR12L1,channel1 12-bit left aligned data holding" hexmask.long.word 0x4 4.--15. 1. "DACC1DHR,DAC channel1 12-bit left-aligned" line.long 0x8 "DHR8R1,channel1 8-bit right aligned data holding" hexmask.long.byte 0x8 0.--7. 1. "DACC1DHR,DAC channel1 8-bit right-aligned" rgroup.long 0x2C++0x3 line.long 0x0 "DOR1,channel1 data output register" hexmask.long.word 0x0 0.--11. 1. "DACC1DOR,DAC channel1 data output" group.long 0x34++0x3 line.long 0x0 "SR,status register" bitfld.long 0x0 29. "DMAUDR2,DAC channel2 DMA underrun" "0,1" bitfld.long 0x0 13. "DMAUDR1,DAC channel1 DMA underrun" "0,1" tree.end endif tree "DEBUG (Debug Support)" base ad:0x40015800 rgroup.long 0x0++0x3 line.long 0x0 "IDCODE,MCU Device ID Code Register" sif (cpuis("FT32F0??*")) hexmask.long.byte 0x0 28.--31. 1. "VERSION,Revision Identifier" hexmask.long.word 0x0 12.--27. 1. "PARTNO,Division Identifier" hexmask.long.word 0x0 0.--11. 1. "DESIGNER_ID,Device Identifier" endif sif (cpuis("FT32F072?*")) hexmask.long.word 0x0 16.--31. 1. "REV_ID,Revision Identifier" hexmask.long.byte 0x0 12.--15. 1. "DIV_ID,Division Identifier" hexmask.long.word 0x0 0.--11. 1. "DEV_ID,Device Identifier" endif group.long 0x4++0x3 line.long 0x0 "CR,Debug MCU Configuration" bitfld.long 0x0 2. "DBG_STANDBY,Debug Standby Mode" "0,1" bitfld.long 0x0 1. "DBG_STOP,Debug Stop Mode" "0,1" sif (cpuis("FT32F0??*")) group.long 0x8++0x7 line.long 0x0 "APB1_FZ,APB1 Freeze Register" bitfld.long 0x0 21. "I2C1_SMBUS_TIMEOUT,SMBUS timeout mode stopped when Core is" "0,1" bitfld.long 0x0 12. "DBG_IWDG_STOP,Debug Independent Wachdog stopped when" "0,1" newline bitfld.long 0x0 11. "DBG_WWDG_STOP,Debug Window Wachdog stopped when Core" "0,1" bitfld.long 0x0 10. "DBG_RTC_STOP,Debug RTC stopped when Core is" "0,1" newline bitfld.long 0x0 8. "DBG_TIMER14_STOP,Debug Timer 14 stopped when Core is" "0,1" bitfld.long 0x0 5. "DBG_TIMER7_STOP,Debug Timer 7 stopped when Core is" "0,1" newline bitfld.long 0x0 4. "DBG_TIMER6_STOP,Debug Timer 6 stopped when Core is" "0,1" bitfld.long 0x0 1. "DBG_TIMER3_STOP,Debug Timer 3 stopped when Core is" "0,1" line.long 0x4 "APB2_FZ,APB2 Freeze Register" bitfld.long 0x4 18. "DBG_TIMER17_STO,Debug Timer 17 stopped when Core is" "0,1" bitfld.long 0x4 17. "DBG_TIMER16_STO,Debug Timer 16 stopped when Core is" "0,1" newline bitfld.long 0x4 16. "DBG_TIMER15_STO,Debug Timer 15 stopped when Core is" "0,1" bitfld.long 0x4 11. "DBG_TIMER1_STOP,Debug Timer 1 stopped when Core is" "0,1" endif sif (cpuis("FT32F072?*")) group.long 0x8++0x7 line.long 0x0 "APBLFZ,APB Low Freeze Register" bitfld.long 0x0 21. "I2C1_SMBUS_TIMEOUT,SMBUS timeout mode stopped when Core is" "0,1" bitfld.long 0x0 12. "DBG_IWDG_STOP,Debug Independent Wachdog stopped when" "0,1" newline bitfld.long 0x0 11. "DBG_WWDG_STOP,Debug Window Wachdog stopped when Core" "0,1" bitfld.long 0x0 10. "DBG_RTC_STOP,Debug RTC stopped when Core is" "0,1" newline bitfld.long 0x0 8. "DBG_TIMER14_STOP,Debug Timer 14 stopped when Core is" "0,1" bitfld.long 0x0 4. "DBG_TIMER6_STOP,Debug Timer 6 stopped when Core is" "0,1" newline bitfld.long 0x0 1. "DBG_TIMER3_STOP,Debug Timer 3 stopped when Core is" "0,1" bitfld.long 0x0 0. "DBG_TIMER2_STOP,Debug Timer 2 stopped when Core is" "0,1" line.long 0x4 "APBHFZ,APB High Freeze Register" bitfld.long 0x4 18. "DBG_TIMER17_STO,Debug Timer 17 stopped when Core is" "0,1" bitfld.long 0x4 17. "DBG_TIMER16_STO,Debug Timer 16 stopped when Core is" "0,1" newline bitfld.long 0x4 16. "DBG_TIMER15_STO,Debug Timer 15 stopped when Core is" "0,1" bitfld.long 0x4 11. "DBG_TIMER1_STOP,Debug Timer 1 stopped when Core is" "0,1" endif tree.end sif (cpuis("FT32F0??*")) tree "DIV (32/16-bit Divider)" base ad:0x40010080 group.long 0x0++0x7 line.long 0x0 "DIV_DID,DIV_DID Register" hexmask.long 0x0 0.--30. 1. "DID,Device Identifier" line.long 0x4 "DIV_DIS,DIV_DIS Register" hexmask.long.word 0x4 0.--15. 1. "DIS,Device Identifier" rgroup.long 0x8++0x7 line.long 0x0 "DIV_QUO,DIV_QUO Register" hexmask.long 0x0 0.--30. 1. "QUO,Device Identifier" line.long 0x4 "DIV_REM,DIV_REM Register" hexmask.long.word 0x4 0.--15. 1. "REM,Device Identifier" group.long 0x10++0x3 line.long 0x0 "DIV_SC,DIV_SC Register" rbitfld.long 0x0 11. "DIVOVC,Device Identifier" "0,1" rbitfld.long 0x0 9. "DIV0ERRC,Device Identifier" "0,1" bitfld.long 0x0 4. "DIVOVIE,Device Identifier" "0,1" rbitfld.long 0x0 3. "DIVOV,Device Identifier" "0,1" bitfld.long 0x0 2. "DIV0IE,Device Identifier" "0,1" rbitfld.long 0x0 1. "DIV0ERR,Device Identifier" "0,1" rbitfld.long 0x0 0. "DIVBUSY,Device Identifier" "0,1" tree.end endif tree "DMA (Direct Memory Access)" base ad:0x40020000 rgroup.long 0x0++0x3 line.long 0x0 "ISR,DMA interrupt status register" sif (cpuis("FT32F072?*")) bitfld.long 0x0 27. "TEIF7,Channel 7 Transfer Error" "0,1" bitfld.long 0x0 26. "HTIF7,Channel 7 Half Transfer Complete" "0,1" bitfld.long 0x0 25. "TCIF7,Channel 7 Transfer Complete" "0,1" bitfld.long 0x0 24. "GIF7,Channel 7 Global interrupt" "0,1" bitfld.long 0x0 23. "TEIF6,Channel 6 Transfer Error" "0,1" bitfld.long 0x0 22. "HTIF6,Channel 6 Half Transfer Complete" "0,1" bitfld.long 0x0 21. "TCIF6,Channel 6 Transfer Complete" "0,1" bitfld.long 0x0 20. "GIF6,Channel 6 Global interrupt" "0,1" endif bitfld.long 0x0 19. "TEIF5,Channel 5 Transfer Error" "0,1" bitfld.long 0x0 18. "HTIF5,Channel 5 Half Transfer Complete" "0,1" bitfld.long 0x0 17. "TCIF5,Channel 5 Transfer Complete" "0,1" newline bitfld.long 0x0 16. "GIF5,Channel 5 Global interrupt" "0,1" bitfld.long 0x0 15. "TEIF4,Channel 4 Transfer Error" "0,1" bitfld.long 0x0 14. "HTIF4,Channel 4 Half Transfer Complete" "0,1" bitfld.long 0x0 13. "TCIF4,Channel 4 Transfer Complete" "0,1" bitfld.long 0x0 12. "GIF4,Channel 4 Global interrupt" "0,1" bitfld.long 0x0 11. "TEIF3,Channel 3 Transfer Error" "0,1" bitfld.long 0x0 10. "HTIF3,Channel 3 Half Transfer Complete" "0,1" bitfld.long 0x0 9. "TCIF3,Channel 3 Transfer Complete" "0,1" bitfld.long 0x0 8. "GIF3,Channel 3 Global interrupt" "0,1" bitfld.long 0x0 7. "TEIF2,Channel 2 Transfer Error" "0,1" bitfld.long 0x0 6. "HTIF2,Channel 2 Half Transfer Complete" "0,1" newline bitfld.long 0x0 5. "TCIF2,Channel 2 Transfer Complete" "0,1" bitfld.long 0x0 4. "GIF2,Channel 2 Global interrupt" "0,1" bitfld.long 0x0 3. "TEIF1,Channel 1 Transfer Error" "0,1" bitfld.long 0x0 2. "HTIF1,Channel 1 Half Transfer Complete" "0,1" bitfld.long 0x0 1. "TCIF1,Channel 1 Transfer Complete" "0,1" bitfld.long 0x0 0. "GIF1,Channel 1 Global interrupt" "0,1" wgroup.long 0x4++0x3 line.long 0x0 "IFCR,DMA interrupt flag clear register" sif (cpuis("FT32F072?*")) bitfld.long 0x0 27. "CTEIF7,Channel 7 Transfer Error" "0,1" bitfld.long 0x0 26. "CHTIF7,Channel 7 Half Transfer" "0,1" bitfld.long 0x0 25. "CTCIF7,Channel 7 Transfer Complete" "0,1" bitfld.long 0x0 24. "CGIF7,Channel 7 Global interrupt" "0,1" bitfld.long 0x0 23. "CTEIF6,Channel 6 Transfer Error" "0,1" bitfld.long 0x0 22. "CHTIF6,Channel 6 Half Transfer" "0,1" bitfld.long 0x0 21. "CTCIF6,Channel 6 Transfer Complete" "0,1" bitfld.long 0x0 20. "CGIF6,Channel 6 Global interrupt" "0,1" endif bitfld.long 0x0 19. "CTEIF5,Channel 5 Transfer Error" "0,1" bitfld.long 0x0 18. "CHTIF5,Channel 5 Half Transfer" "0,1" bitfld.long 0x0 17. "CTCIF5,Channel 5 Transfer Complete" "0,1" newline bitfld.long 0x0 16. "CGIF5,Channel 5 Global interrupt" "0,1" bitfld.long 0x0 15. "CTEIF4,Channel 4 Transfer Error" "0,1" bitfld.long 0x0 14. "CHTIF4,Channel 4 Half Transfer" "0,1" bitfld.long 0x0 13. "CTCIF4,Channel 4 Transfer Complete" "0,1" bitfld.long 0x0 12. "CGIF4,Channel 4 Global interrupt" "0,1" bitfld.long 0x0 11. "CTEIF3,Channel 3 Transfer Error" "0,1" bitfld.long 0x0 10. "CHTIF3,Channel 3 Half Transfer" "0,1" bitfld.long 0x0 9. "CTCIF3,Channel 3 Transfer Complete" "0,1" bitfld.long 0x0 8. "CGIF3,Channel 3 Global interrupt" "0,1" bitfld.long 0x0 7. "CTEIF2,Channel 2 Transfer Error" "0,1" bitfld.long 0x0 6. "CHTIF2,Channel 2 Half Transfer" "0,1" newline bitfld.long 0x0 5. "CTCIF2,Channel 2 Transfer Complete" "0,1" bitfld.long 0x0 4. "CGIF2,Channel 2 Global interrupt" "0,1" bitfld.long 0x0 3. "CTEIF1,Channel 1 Transfer Error" "0,1" bitfld.long 0x0 2. "CHTIF1,Channel 1 Half Transfer" "0,1" bitfld.long 0x0 1. "CTCIF1,Channel 1 Transfer Complete" "0,1" bitfld.long 0x0 0. "CGIF1,Channel 1 Global interrupt" "0,1" group.long 0x8++0xF line.long 0x0 "CCR1,DMA channel configuration register" bitfld.long 0x0 14. "MEM2MEM,Memory to memory mode" "0,1" bitfld.long 0x0 12.--13. "PL,Channel Priority level" "0,1,2,3" bitfld.long 0x0 10.--11. "MSIZE,Memory size" "0,1,2,3" bitfld.long 0x0 8.--9. "PSIZE,Peripheral size" "0,1,2,3" bitfld.long 0x0 7. "MINC,Memory increment mode" "0,1" bitfld.long 0x0 6. "PINC,Peripheral increment mode" "0,1" bitfld.long 0x0 5. "CIRC,Circular mode" "0,1" bitfld.long 0x0 4. "DIR,Data transfer direction" "0,1" bitfld.long 0x0 3. "TEIE,Transfer error interrupt" "0,1" bitfld.long 0x0 2. "HTIE,Half Transfer interrupt" "0,1" bitfld.long 0x0 1. "TCIE,Transfer complete interrupt" "0,1" newline bitfld.long 0x0 0. "EN,Channel enable" "0,1" line.long 0x4 "CNDTR1,DMA channel 1 number of data" hexmask.long.word 0x4 0.--15. 1. "NDT,Number of data to transfer" line.long 0x8 "CPAR1,DMA channel 1 peripheral address" hexmask.long 0x8 0.--31. 1. "PA,Peripheral address" line.long 0xC "CMAR1,DMA channel 1 memory address" hexmask.long 0xC 0.--31. 1. "MA,Memory address" group.long 0x1C++0xF line.long 0x0 "CCR2,DMA channel configuration register" bitfld.long 0x0 14. "MEM2MEM,Memory to memory mode" "0,1" bitfld.long 0x0 12.--13. "PL,Channel Priority level" "0,1,2,3" bitfld.long 0x0 10.--11. "MSIZE,Memory size" "0,1,2,3" bitfld.long 0x0 8.--9. "PSIZE,Peripheral size" "0,1,2,3" bitfld.long 0x0 7. "MINC,Memory increment mode" "0,1" bitfld.long 0x0 6. "PINC,Peripheral increment mode" "0,1" bitfld.long 0x0 5. "CIRC,Circular mode" "0,1" bitfld.long 0x0 4. "DIR,Data transfer direction" "0,1" bitfld.long 0x0 3. "TEIE,Transfer error interrupt" "0,1" bitfld.long 0x0 2. "HTIE,Half Transfer interrupt" "0,1" bitfld.long 0x0 1. "TCIE,Transfer complete interrupt" "0,1" newline bitfld.long 0x0 0. "EN,Channel enable" "0,1" line.long 0x4 "CNDTR2,DMA channel 2 number of data" hexmask.long.word 0x4 0.--15. 1. "NDT,Number of data to transfer" line.long 0x8 "CPAR2,DMA channel 2 peripheral address" hexmask.long 0x8 0.--31. 1. "PA,Peripheral address" line.long 0xC "CMAR2,DMA channel 2 memory address" hexmask.long 0xC 0.--31. 1. "MA,Memory address" group.long 0x30++0xF line.long 0x0 "CCR3,DMA channel configuration register" bitfld.long 0x0 14. "MEM2MEM,Memory to memory mode" "0,1" bitfld.long 0x0 12.--13. "PL,Channel Priority level" "0,1,2,3" bitfld.long 0x0 10.--11. "MSIZE,Memory size" "0,1,2,3" bitfld.long 0x0 8.--9. "PSIZE,Peripheral size" "0,1,2,3" bitfld.long 0x0 7. "MINC,Memory increment mode" "0,1" bitfld.long 0x0 6. "PINC,Peripheral increment mode" "0,1" bitfld.long 0x0 5. "CIRC,Circular mode" "0,1" bitfld.long 0x0 4. "DIR,Data transfer direction" "0,1" bitfld.long 0x0 3. "TEIE,Transfer error interrupt" "0,1" bitfld.long 0x0 2. "HTIE,Half Transfer interrupt" "0,1" bitfld.long 0x0 1. "TCIE,Transfer complete interrupt" "0,1" newline bitfld.long 0x0 0. "EN,Channel enable" "0,1" line.long 0x4 "CNDTR3,DMA channel 3 number of data" hexmask.long.word 0x4 0.--15. 1. "NDT,Number of data to transfer" line.long 0x8 "CPAR3,DMA channel 3 peripheral address" hexmask.long 0x8 0.--31. 1. "PA,Peripheral address" line.long 0xC "CMAR3,DMA channel 3 memory address" hexmask.long 0xC 0.--31. 1. "MA,Memory address" group.long 0x44++0xF line.long 0x0 "CCR4,DMA channel configuration register" bitfld.long 0x0 14. "MEM2MEM,Memory to memory mode" "0,1" bitfld.long 0x0 12.--13. "PL,Channel Priority level" "0,1,2,3" bitfld.long 0x0 10.--11. "MSIZE,Memory size" "0,1,2,3" bitfld.long 0x0 8.--9. "PSIZE,Peripheral size" "0,1,2,3" bitfld.long 0x0 7. "MINC,Memory increment mode" "0,1" bitfld.long 0x0 6. "PINC,Peripheral increment mode" "0,1" bitfld.long 0x0 5. "CIRC,Circular mode" "0,1" bitfld.long 0x0 4. "DIR,Data transfer direction" "0,1" bitfld.long 0x0 3. "TEIE,Transfer error interrupt" "0,1" bitfld.long 0x0 2. "HTIE,Half Transfer interrupt" "0,1" bitfld.long 0x0 1. "TCIE,Transfer complete interrupt" "0,1" newline bitfld.long 0x0 0. "EN,Channel enable" "0,1" line.long 0x4 "CNDTR4,DMA channel 4 number of data" hexmask.long.word 0x4 0.--15. 1. "NDT,Number of data to transfer" line.long 0x8 "CPAR4,DMA channel 4 peripheral address" hexmask.long 0x8 0.--31. 1. "PA,Peripheral address" line.long 0xC "CMAR4,DMA channel 4 memory address" hexmask.long 0xC 0.--31. 1. "MA,Memory address" group.long 0x58++0xF line.long 0x0 "CCR5,DMA channel configuration register" bitfld.long 0x0 14. "MEM2MEM,Memory to memory mode" "0,1" bitfld.long 0x0 12.--13. "PL,Channel Priority level" "0,1,2,3" bitfld.long 0x0 10.--11. "MSIZE,Memory size" "0,1,2,3" bitfld.long 0x0 8.--9. "PSIZE,Peripheral size" "0,1,2,3" bitfld.long 0x0 7. "MINC,Memory increment mode" "0,1" bitfld.long 0x0 6. "PINC,Peripheral increment mode" "0,1" bitfld.long 0x0 5. "CIRC,Circular mode" "0,1" bitfld.long 0x0 4. "DIR,Data transfer direction" "0,1" bitfld.long 0x0 3. "TEIE,Transfer error interrupt" "0,1" bitfld.long 0x0 2. "HTIE,Half Transfer interrupt" "0,1" bitfld.long 0x0 1. "TCIE,Transfer complete interrupt" "0,1" newline bitfld.long 0x0 0. "EN,Channel enable" "0,1" line.long 0x4 "CNDTR5,DMA channel 5 number of data" hexmask.long.word 0x4 0.--15. 1. "NDT,Number of data to transfer" line.long 0x8 "CPAR5,DMA channel 5 peripheral address" hexmask.long 0x8 0.--31. 1. "PA,Peripheral address" line.long 0xC "CMAR5,DMA channel 5 memory address" hexmask.long 0xC 0.--31. 1. "MA,Memory address" sif (cpuis("FT32F072?*")) group.long 0x6C++0xF line.long 0x0 "CCR6,DMA channel configuration register" bitfld.long 0x0 14. "MEM2MEM,Memory to memory mode" "0,1" bitfld.long 0x0 12.--13. "PL,Channel Priority level" "0,1,2,3" newline bitfld.long 0x0 10.--11. "MSIZE,Memory size" "0,1,2,3" bitfld.long 0x0 8.--9. "PSIZE,Peripheral size" "0,1,2,3" newline bitfld.long 0x0 7. "MINC,Memory increment mode" "0,1" bitfld.long 0x0 6. "PINC,Peripheral increment mode" "0,1" newline bitfld.long 0x0 5. "CIRC,Circular mode" "0,1" bitfld.long 0x0 4. "DIR,Data transfer direction" "0,1" newline bitfld.long 0x0 3. "TEIE,Transfer error interrupt" "0,1" bitfld.long 0x0 2. "HTIE,Half Transfer interrupt" "0,1" newline bitfld.long 0x0 1. "TCIE,Transfer complete interrupt" "0,1" bitfld.long 0x0 0. "EN,Channel enable" "0,1" line.long 0x4 "CNDTR6,DMA channel 6 number of data" hexmask.long.word 0x4 0.--15. 1. "NDT,Number of data to transfer" line.long 0x8 "CPAR6,DMA channel 6 peripheral address" hexmask.long 0x8 0.--31. 1. "PA,Peripheral address" line.long 0xC "CMAR6,DMA channel 6 memory address" hexmask.long 0xC 0.--31. 1. "MA,Memory address" group.long 0x80++0xF line.long 0x0 "CCR7,DMA channel configuration register" bitfld.long 0x0 14. "MEM2MEM,Memory to memory mode" "0,1" bitfld.long 0x0 12.--13. "PL,Channel Priority level" "0,1,2,3" newline bitfld.long 0x0 10.--11. "MSIZE,Memory size" "0,1,2,3" bitfld.long 0x0 8.--9. "PSIZE,Peripheral size" "0,1,2,3" newline bitfld.long 0x0 7. "MINC,Memory increment mode" "0,1" bitfld.long 0x0 6. "PINC,Peripheral increment mode" "0,1" newline bitfld.long 0x0 5. "CIRC,Circular mode" "0,1" bitfld.long 0x0 4. "DIR,Data transfer direction" "0,1" newline bitfld.long 0x0 3. "TEIE,Transfer error interrupt" "0,1" bitfld.long 0x0 2. "HTIE,Half Transfer interrupt" "0,1" newline bitfld.long 0x0 1. "TCIE,Transfer complete interrupt" "0,1" bitfld.long 0x0 0. "EN,Channel enable" "0,1" line.long 0x4 "CNDTR7,DMA channel 7 number of data" hexmask.long.word 0x4 0.--15. 1. "NDT,Number of data to transfer" line.long 0x8 "CPAR7,DMA channel 7 peripheral address" hexmask.long 0x8 0.--31. 1. "PA,Peripheral address" line.long 0xC "CMAR7,DMA channel 7 memory address" hexmask.long 0xC 0.--31. 1. "MA,Memory address" endif tree.end tree "EXTI (Extended Interrupts and Events Controller)" base ad:0x40010400 group.long 0x0++0x17 line.long 0x0 "IMR,Interrupt mask register" bitfld.long 0x0 27. "MR27,Interrupt Mask on line 27" "0,1" bitfld.long 0x0 26. "MR26,Interrupt Mask on line 26" "0,1" bitfld.long 0x0 25. "MR25,Interrupt Mask on line 25" "0,1" bitfld.long 0x0 24. "MR24,Interrupt Mask on line 24" "0,1" bitfld.long 0x0 23. "MR23,Interrupt Mask on line 23" "0,1" bitfld.long 0x0 22. "MR22,Interrupt Mask on line 22" "0,1" bitfld.long 0x0 21. "MR21,Interrupt Mask on line 21" "0,1" bitfld.long 0x0 20. "MR20,Interrupt Mask on line 20" "0,1" bitfld.long 0x0 19. "MR19,Interrupt Mask on line 19" "0,1" bitfld.long 0x0 18. "MR18,Interrupt Mask on line 18" "0,1" bitfld.long 0x0 17. "MR17,Interrupt Mask on line 17" "0,1" bitfld.long 0x0 16. "MR16,Interrupt Mask on line 16" "0,1" newline bitfld.long 0x0 15. "MR15,Interrupt Mask on line 15" "0,1" bitfld.long 0x0 14. "MR14,Interrupt Mask on line 14" "0,1" bitfld.long 0x0 13. "MR13,Interrupt Mask on line 13" "0,1" bitfld.long 0x0 12. "MR12,Interrupt Mask on line 12" "0,1" bitfld.long 0x0 11. "MR11,Interrupt Mask on line 11" "0,1" bitfld.long 0x0 10. "MR10,Interrupt Mask on line 10" "0,1" bitfld.long 0x0 9. "MR9,Interrupt Mask on line 9" "0,1" bitfld.long 0x0 8. "MR8,Interrupt Mask on line 8" "0,1" bitfld.long 0x0 7. "MR7,Interrupt Mask on line 7" "0,1" bitfld.long 0x0 6. "MR6,Interrupt Mask on line 6" "0,1" bitfld.long 0x0 5. "MR5,Interrupt Mask on line 5" "0,1" bitfld.long 0x0 4. "MR4,Interrupt Mask on line 4" "0,1" newline bitfld.long 0x0 3. "MR3,Interrupt Mask on line 3" "0,1" bitfld.long 0x0 2. "MR2,Interrupt Mask on line 2" "0,1" bitfld.long 0x0 1. "MR1,Interrupt Mask on line 1" "0,1" bitfld.long 0x0 0. "MR0,Interrupt Mask on line 0" "0,1" line.long 0x4 "EMR,Event mask register (EXTI_EMR)" bitfld.long 0x4 27. "MR27,Event Mask on line 27" "0,1" bitfld.long 0x4 26. "MR26,Event Mask on line 26" "0,1" bitfld.long 0x4 25. "MR25,Event Mask on line 25" "0,1" bitfld.long 0x4 24. "MR24,Event Mask on line 24" "0,1" bitfld.long 0x4 23. "MR23,Event Mask on line 23" "0,1" bitfld.long 0x4 22. "MR22,Event Mask on line 22" "0,1" bitfld.long 0x4 21. "MR21,Event Mask on line 21" "0,1" bitfld.long 0x4 20. "MR20,Event Mask on line 20" "0,1" bitfld.long 0x4 19. "MR19,Event Mask on line 19" "0,1" bitfld.long 0x4 18. "MR18,Event Mask on line 18" "0,1" bitfld.long 0x4 17. "MR17,Event Mask on line 17" "0,1" bitfld.long 0x4 16. "MR16,Event Mask on line 16" "0,1" newline bitfld.long 0x4 15. "MR15,Event Mask on line 15" "0,1" bitfld.long 0x4 14. "MR14,Event Mask on line 14" "0,1" bitfld.long 0x4 13. "MR13,Event Mask on line 13" "0,1" bitfld.long 0x4 12. "MR12,Event Mask on line 12" "0,1" bitfld.long 0x4 11. "MR11,Event Mask on line 11" "0,1" bitfld.long 0x4 10. "MR10,Event Mask on line 10" "0,1" bitfld.long 0x4 9. "MR9,Event Mask on line 9" "0,1" bitfld.long 0x4 8. "MR8,Event Mask on line 8" "0,1" bitfld.long 0x4 7. "MR7,Event Mask on line 7" "0,1" bitfld.long 0x4 6. "MR6,Event Mask on line 6" "0,1" bitfld.long 0x4 5. "MR5,Event Mask on line 5" "0,1" bitfld.long 0x4 4. "MR4,Event Mask on line 4" "0,1" newline bitfld.long 0x4 3. "MR3,Event Mask on line 3" "0,1" bitfld.long 0x4 2. "MR2,Event Mask on line 2" "0,1" bitfld.long 0x4 1. "MR1,Event Mask on line 1" "0,1" bitfld.long 0x4 0. "MR0,Event Mask on line 0" "0,1" line.long 0x8 "RTSR,Rising Trigger selection register" sif (cpuis("FT32F0??*")) bitfld.long 0x8 22. "TR22,Rising trigger event configuration of" "0,1" bitfld.long 0x8 21. "TR21,Rising trigger event configuration of" "0,1" endif bitfld.long 0x8 19. "TR19,Rising trigger event configuration of" "0,1" bitfld.long 0x8 17. "TR17,Rising trigger event configuration of" "0,1" bitfld.long 0x8 16. "TR16,Rising trigger event configuration of" "0,1" bitfld.long 0x8 15. "TR15,Rising trigger event configuration of" "0,1" bitfld.long 0x8 14. "TR14,Rising trigger event configuration of" "0,1" bitfld.long 0x8 13. "TR13,Rising trigger event configuration of" "0,1" bitfld.long 0x8 12. "TR12,Rising trigger event configuration of" "0,1" bitfld.long 0x8 11. "TR11,Rising trigger event configuration of" "0,1" bitfld.long 0x8 10. "TR10,Rising trigger event configuration of" "0,1" bitfld.long 0x8 9. "TR9,Rising trigger event configuration of" "0,1" newline bitfld.long 0x8 8. "TR8,Rising trigger event configuration of" "0,1" bitfld.long 0x8 7. "TR7,Rising trigger event configuration of" "0,1" bitfld.long 0x8 6. "TR6,Rising trigger event configuration of" "0,1" bitfld.long 0x8 5. "TR5,Rising trigger event configuration of" "0,1" bitfld.long 0x8 4. "TR4,Rising trigger event configuration of" "0,1" bitfld.long 0x8 3. "TR3,Rising trigger event configuration of" "0,1" bitfld.long 0x8 2. "TR2,Rising trigger event configuration of" "0,1" bitfld.long 0x8 1. "TR1,Rising trigger event configuration of" "0,1" bitfld.long 0x8 0. "TR0,Rising trigger event configuration of" "0,1" line.long 0xC "FTSR,Falling Trigger selection register" sif (cpuis("FT32F0??*")) bitfld.long 0xC 22. "TR22,Falling trigger event configuration of" "0,1" bitfld.long 0xC 21. "TR21,Falling trigger event configuration of" "0,1" endif bitfld.long 0xC 19. "TR19,Falling trigger event configuration of" "0,1" bitfld.long 0xC 17. "TR17,Falling trigger event configuration of" "0,1" bitfld.long 0xC 16. "TR16,Falling trigger event configuration of" "0,1" bitfld.long 0xC 15. "TR15,Falling trigger event configuration of" "0,1" bitfld.long 0xC 14. "TR14,Falling trigger event configuration of" "0,1" bitfld.long 0xC 13. "TR13,Falling trigger event configuration of" "0,1" bitfld.long 0xC 12. "TR12,Falling trigger event configuration of" "0,1" bitfld.long 0xC 11. "TR11,Falling trigger event configuration of" "0,1" bitfld.long 0xC 10. "TR10,Falling trigger event configuration of" "0,1" bitfld.long 0xC 9. "TR9,Falling trigger event configuration of" "0,1" newline bitfld.long 0xC 8. "TR8,Falling trigger event configuration of" "0,1" bitfld.long 0xC 7. "TR7,Falling trigger event configuration of" "0,1" bitfld.long 0xC 6. "TR6,Falling trigger event configuration of" "0,1" bitfld.long 0xC 5. "TR5,Falling trigger event configuration of" "0,1" bitfld.long 0xC 4. "TR4,Falling trigger event configuration of" "0,1" bitfld.long 0xC 3. "TR3,Falling trigger event configuration of" "0,1" bitfld.long 0xC 2. "TR2,Falling trigger event configuration of" "0,1" bitfld.long 0xC 1. "TR1,Falling trigger event configuration of" "0,1" bitfld.long 0xC 0. "TR0,Falling trigger event configuration of" "0,1" line.long 0x10 "SWIER,Software interrupt event register" sif (cpuis("FT32F0??*")) bitfld.long 0x10 22. "SWIER22,Software Interrupt on line" "0,1" bitfld.long 0x10 21. "SWIER21,Software Interrupt on line" "0,1" endif bitfld.long 0x10 19. "SWIER19,Software Interrupt on line" "0,1" bitfld.long 0x10 17. "SWIER17,Software Interrupt on line" "0,1" bitfld.long 0x10 16. "SWIER16,Software Interrupt on line" "0,1" bitfld.long 0x10 15. "SWIER15,Software Interrupt on line" "0,1" bitfld.long 0x10 14. "SWIER14,Software Interrupt on line" "0,1" bitfld.long 0x10 13. "SWIER13,Software Interrupt on line" "0,1" bitfld.long 0x10 12. "SWIER12,Software Interrupt on line" "0,1" bitfld.long 0x10 11. "SWIER11,Software Interrupt on line" "0,1" bitfld.long 0x10 10. "SWIER10,Software Interrupt on line" "0,1" bitfld.long 0x10 9. "SWIER9,Software Interrupt on line" "0,1" newline bitfld.long 0x10 8. "SWIER8,Software Interrupt on line" "0,1" bitfld.long 0x10 7. "SWIER7,Software Interrupt on line" "0,1" bitfld.long 0x10 6. "SWIER6,Software Interrupt on line" "0,1" bitfld.long 0x10 5. "SWIER5,Software Interrupt on line" "0,1" bitfld.long 0x10 4. "SWIER4,Software Interrupt on line" "0,1" bitfld.long 0x10 3. "SWIER3,Software Interrupt on line" "0,1" bitfld.long 0x10 2. "SWIER2,Software Interrupt on line" "0,1" bitfld.long 0x10 1. "SWIER1,Software Interrupt on line" "0,1" bitfld.long 0x10 0. "SWIER0,Software Interrupt on line" "0,1" line.long 0x14 "PR,Pending register (EXTI_PR)" sif (cpuis("FT32F0??*")) bitfld.long 0x14 22. "PR22,Pending bit 22" "0,1" bitfld.long 0x14 21. "PR21,Pending bit 21" "0,1" endif bitfld.long 0x14 19. "PR19,Pending bit 19" "0,1" bitfld.long 0x14 17. "PR17,Pending bit 17" "0,1" bitfld.long 0x14 16. "PR16,Pending bit 16" "0,1" bitfld.long 0x14 15. "PR15,Pending bit 15" "0,1" bitfld.long 0x14 14. "PR14,Pending bit 14" "0,1" bitfld.long 0x14 13. "PR13,Pending bit 13" "0,1" bitfld.long 0x14 12. "PR12,Pending bit 12" "0,1" bitfld.long 0x14 11. "PR11,Pending bit 11" "0,1" bitfld.long 0x14 10. "PR10,Pending bit 10" "0,1" bitfld.long 0x14 9. "PR9,Pending bit 9" "0,1" newline bitfld.long 0x14 8. "PR8,Pending bit 8" "0,1" bitfld.long 0x14 7. "PR7,Pending bit 7" "0,1" bitfld.long 0x14 6. "PR6,Pending bit 6" "0,1" bitfld.long 0x14 5. "PR5,Pending bit 5" "0,1" bitfld.long 0x14 4. "PR4,Pending bit 4" "0,1" bitfld.long 0x14 3. "PR3,Pending bit 3" "0,1" bitfld.long 0x14 2. "PR2,Pending bit 2" "0,1" bitfld.long 0x14 1. "PR1,Pending bit 1" "0,1" bitfld.long 0x14 0. "PR0,Pending bit 0" "0,1" tree.end tree "FLASH" base ad:0x40022000 group.long 0x0++0x3 line.long 0x0 "ACR,Flash access control register" rbitfld.long 0x0 5. "PRFTBS,PRFTBS" "0,1" bitfld.long 0x0 4. "PRFTBE,PRFTBE" "0,1" sif (cpuis("FT32F0??*")) hexmask.long.byte 0x0 0.--3. 1. "LATENCY,LATENCY" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 0.--2. "LATENCY,LATENCY" "0,1,2,3,4,5,6,7" endif wgroup.long 0x4++0x7 line.long 0x0 "KEYR,Flash key register" hexmask.long 0x0 0.--31. 1. "FKEYR,Flash Key" line.long 0x4 "OPTKEYR,Flash option key register" hexmask.long 0x4 0.--31. 1. "OPTKEYR,Option byte key" group.long 0xC++0x7 line.long 0x0 "SR,Flash status register" bitfld.long 0x0 5. "EOP,End of operation" "0,1" bitfld.long 0x0 4. "WRPRT,Write protection error" "0,1" bitfld.long 0x0 2. "PGERR,Programming error" "0,1" rbitfld.long 0x0 0. "BSY,Busy" "0,1" line.long 0x4 "CR,Flash control register" sif (cpuis("FT32F0??*")) bitfld.long 0x4 13. "OBL_LAUNCH,Force option byte loading" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x4 13. "FORCE_OPTLOAD,Force option byte loading" "0,1" endif bitfld.long 0x4 12. "EOPIE,End of operation interrupt" "0,1" bitfld.long 0x4 10. "ERRIE,Error interrupt enable" "0,1" bitfld.long 0x4 9. "OPTWRE,Option bytes write enable" "0,1" bitfld.long 0x4 7. "LOCK,Lock" "0,1" bitfld.long 0x4 6. "STRT,Start" "0,1" newline bitfld.long 0x4 5. "OPTER,Option byte erase" "0,1" bitfld.long 0x4 4. "OPTPG,Option byte programming" "0,1" bitfld.long 0x4 2. "MER,Mass erase" "0,1" bitfld.long 0x4 1. "PER,Page erase" "0,1" bitfld.long 0x4 0. "PG,Programming" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "AR,Flash address register" hexmask.long 0x0 0.--31. 1. "FAR,Flash address" rgroup.long 0x1C++0x7 line.long 0x0 "OBR,Option byte register" hexmask.long.byte 0x0 24.--31. 1. "Data1,Data1" hexmask.long.byte 0x0 16.--23. 1. "Data0,Data0" bitfld.long 0x0 13. "VDDA_MONITOR,VDDA_MONITOR" "0,1" bitfld.long 0x0 12. "BOOT1,BOOT1" "0,1" bitfld.long 0x0 10. "nRST_STDBY,nRST_STDBY" "0,1" bitfld.long 0x0 9. "nRST_STOP,nRST_STOP" "0,1" bitfld.long 0x0 8. "WDG_SW,WDG_SW" "0,1" newline sif (cpuis("FT32F072?*")) bitfld.long 0x0 2. "LEVEL2_PROT,Level 2 protection status" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 1. "LEVEL1_PROT,Level 1 protection status" "0,1" endif sif (cpuis("FT32F0??*")) bitfld.long 0x0 1.--2. "RDPRT,Level protection status" "0,1,2,3" endif bitfld.long 0x0 0. "OPTERR,Option byte error" "0,1" line.long 0x4 "WRPR,Write protection register" hexmask.long 0x4 0.--31. 1. "WRP,Write protect" tree.end tree "GPIO (General Purpose I/Os)" base ad:0x0 sif (cpuis("FT32F072?*")) tree "GPIOE" base ad:0x48001000 group.long 0x0++0xF line.long 0x0 "MODER,GPIO port mode register" bitfld.long 0x0 30.--31. "MODER15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 28.--29. "MODER14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 26.--27. "MODER13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 24.--25. "MODER12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 22.--23. "MODER11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 20.--21. "MODER10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 18.--19. "MODER9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 16.--17. "MODER8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 14.--15. "MODER7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 12.--13. "MODER6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x0 10.--11. "MODER5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 8.--9. "MODER4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 6.--7. "MODER3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 4.--5. "MODER2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 2.--3. "MODER1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 0.--1. "MODER0,Port x configuration bits (y =" "0,1,2,3" line.long 0x4 "OTYPER,GPIO port output type register" bitfld.long 0x4 15. "OT15,Port x configuration bit" "0,1" bitfld.long 0x4 14. "OT14,Port x configuration bit" "0,1" bitfld.long 0x4 13. "OT13,Port x configuration bit" "0,1" bitfld.long 0x4 12. "OT12,Port x configuration bit" "0,1" bitfld.long 0x4 11. "OT11,Port x configuration bit" "0,1" bitfld.long 0x4 10. "OT10,Port x configuration bit" "0,1" bitfld.long 0x4 9. "OT9,Port x configuration bit 9" "0,1" bitfld.long 0x4 8. "OT8,Port x configuration bit 8" "0,1" bitfld.long 0x4 7. "OT7,Port x configuration bit 7" "0,1" bitfld.long 0x4 6. "OT6,Port x configuration bit 6" "0,1" newline bitfld.long 0x4 5. "OT5,Port x configuration bit 5" "0,1" bitfld.long 0x4 4. "OT4,Port x configuration bit 4" "0,1" bitfld.long 0x4 3. "OT3,Port x configuration bit 3" "0,1" bitfld.long 0x4 2. "OT2,Port x configuration bit 2" "0,1" bitfld.long 0x4 1. "OT1,Port x configuration bit 1" "0,1" bitfld.long 0x4 0. "OT0,Port x configuration bit 0" "0,1" line.long 0x8 "OSPEEDR,GPIO port output speed" bitfld.long 0x8 30.--31. "OSPEEDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 28.--29. "OSPEEDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 26.--27. "OSPEEDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 24.--25. "OSPEEDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 22.--23. "OSPEEDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 20.--21. "OSPEEDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 18.--19. "OSPEEDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 16.--17. "OSPEEDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 14.--15. "OSPEEDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 12.--13. "OSPEEDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x8 10.--11. "OSPEEDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 8.--9. "OSPEEDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 6.--7. "OSPEEDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 4.--5. "OSPEEDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 2.--3. "OSPEEDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 0.--1. "OSPEEDR0,Port x configuration bits (y =" "0,1,2,3" line.long 0xC "PUPDR,GPIO port pull-up/pull-down" bitfld.long 0xC 30.--31. "PUPDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 28.--29. "PUPDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 26.--27. "PUPDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 24.--25. "PUPDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 22.--23. "PUPDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 20.--21. "PUPDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 18.--19. "PUPDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 16.--17. "PUPDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 14.--15. "PUPDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 12.--13. "PUPDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0xC 10.--11. "PUPDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 8.--9. "PUPDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 6.--7. "PUPDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 4.--5. "PUPDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 2.--3. "PUPDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 0.--1. "PUPDR0,Port x configuration bits (y =" "0,1,2,3" rgroup.long 0x10++0x3 line.long 0x0 "IDR,GPIO port input data register" bitfld.long 0x0 15. "IDR15,Port input data (y =" "0,1" bitfld.long 0x0 14. "IDR14,Port input data (y =" "0,1" bitfld.long 0x0 13. "IDR13,Port input data (y =" "0,1" bitfld.long 0x0 12. "IDR12,Port input data (y =" "0,1" bitfld.long 0x0 11. "IDR11,Port input data (y =" "0,1" bitfld.long 0x0 10. "IDR10,Port input data (y =" "0,1" bitfld.long 0x0 9. "IDR9,Port input data (y =" "0,1" bitfld.long 0x0 8. "IDR8,Port input data (y =" "0,1" bitfld.long 0x0 7. "IDR7,Port input data (y =" "0,1" bitfld.long 0x0 6. "IDR6,Port input data (y =" "0,1" newline bitfld.long 0x0 5. "IDR5,Port input data (y =" "0,1" bitfld.long 0x0 4. "IDR4,Port input data (y =" "0,1" bitfld.long 0x0 3. "IDR3,Port input data (y =" "0,1" bitfld.long 0x0 2. "IDR2,Port input data (y =" "0,1" bitfld.long 0x0 1. "IDR1,Port input data (y =" "0,1" bitfld.long 0x0 0. "IDR0,Port input data (y =" "0,1" group.long 0x14++0x3 line.long 0x0 "ODR,GPIO port output data register" bitfld.long 0x0 15. "ODR15,Port output data (y =" "0,1" bitfld.long 0x0 14. "ODR14,Port output data (y =" "0,1" bitfld.long 0x0 13. "ODR13,Port output data (y =" "0,1" bitfld.long 0x0 12. "ODR12,Port output data (y =" "0,1" bitfld.long 0x0 11. "ODR11,Port output data (y =" "0,1" bitfld.long 0x0 10. "ODR10,Port output data (y =" "0,1" bitfld.long 0x0 9. "ODR9,Port output data (y =" "0,1" bitfld.long 0x0 8. "ODR8,Port output data (y =" "0,1" bitfld.long 0x0 7. "ODR7,Port output data (y =" "0,1" bitfld.long 0x0 6. "ODR6,Port output data (y =" "0,1" newline bitfld.long 0x0 5. "ODR5,Port output data (y =" "0,1" bitfld.long 0x0 4. "ODR4,Port output data (y =" "0,1" bitfld.long 0x0 3. "ODR3,Port output data (y =" "0,1" bitfld.long 0x0 2. "ODR2,Port output data (y =" "0,1" bitfld.long 0x0 1. "ODR1,Port output data (y =" "0,1" bitfld.long 0x0 0. "ODR0,Port output data (y =" "0,1" wgroup.long 0x18++0x3 line.long 0x0 "BSRR,GPIO port bit set/reset" bitfld.long 0x0 31. "BR15,Port x reset bit y (y =" "0,1" bitfld.long 0x0 30. "BR14,Port x reset bit y (y =" "0,1" bitfld.long 0x0 29. "BR13,Port x reset bit y (y =" "0,1" bitfld.long 0x0 28. "BR12,Port x reset bit y (y =" "0,1" bitfld.long 0x0 27. "BR11,Port x reset bit y (y =" "0,1" bitfld.long 0x0 26. "BR10,Port x reset bit y (y =" "0,1" bitfld.long 0x0 25. "BR9,Port x reset bit y (y =" "0,1" bitfld.long 0x0 24. "BR8,Port x reset bit y (y =" "0,1" bitfld.long 0x0 23. "BR7,Port x reset bit y (y =" "0,1" bitfld.long 0x0 22. "BR6,Port x reset bit y (y =" "0,1" newline bitfld.long 0x0 21. "BR5,Port x reset bit y (y =" "0,1" bitfld.long 0x0 20. "BR4,Port x reset bit y (y =" "0,1" bitfld.long 0x0 19. "BR3,Port x reset bit y (y =" "0,1" bitfld.long 0x0 18. "BR2,Port x reset bit y (y =" "0,1" bitfld.long 0x0 17. "BR1,Port x reset bit y (y =" "0,1" bitfld.long 0x0 16. "BR0,Port x set bit y (y=" "0,1" bitfld.long 0x0 15. "BS15,Port x set bit y (y=" "0,1" bitfld.long 0x0 14. "BS14,Port x set bit y (y=" "0,1" bitfld.long 0x0 13. "BS13,Port x set bit y (y=" "0,1" bitfld.long 0x0 12. "BS12,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 11. "BS11,Port x set bit y (y=" "0,1" bitfld.long 0x0 10. "BS10,Port x set bit y (y=" "0,1" bitfld.long 0x0 9. "BS9,Port x set bit y (y=" "0,1" bitfld.long 0x0 8. "BS8,Port x set bit y (y=" "0,1" bitfld.long 0x0 7. "BS7,Port x set bit y (y=" "0,1" bitfld.long 0x0 6. "BS6,Port x set bit y (y=" "0,1" bitfld.long 0x0 5. "BS5,Port x set bit y (y=" "0,1" bitfld.long 0x0 4. "BS4,Port x set bit y (y=" "0,1" bitfld.long 0x0 3. "BS3,Port x set bit y (y=" "0,1" bitfld.long 0x0 2. "BS2,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 1. "BS1,Port x set bit y (y=" "0,1" bitfld.long 0x0 0. "BS0,Port x set bit y (y=" "0,1" group.long 0x1C++0xB line.long 0x0 "LCKR,GPIO port configuration lock" bitfld.long 0x0 16. "LCKK,Port x lock bit y" "0,1" bitfld.long 0x0 15. "LCK15,Port x lock bit y (y=" "0,1" bitfld.long 0x0 14. "LCK14,Port x lock bit y (y=" "0,1" bitfld.long 0x0 13. "LCK13,Port x lock bit y (y=" "0,1" bitfld.long 0x0 12. "LCK12,Port x lock bit y (y=" "0,1" bitfld.long 0x0 11. "LCK11,Port x lock bit y (y=" "0,1" bitfld.long 0x0 10. "LCK10,Port x lock bit y (y=" "0,1" bitfld.long 0x0 9. "LCK9,Port x lock bit y (y=" "0,1" bitfld.long 0x0 8. "LCK8,Port x lock bit y (y=" "0,1" bitfld.long 0x0 7. "LCK7,Port x lock bit y (y=" "0,1" newline bitfld.long 0x0 6. "LCK6,Port x lock bit y (y=" "0,1" bitfld.long 0x0 5. "LCK5,Port x lock bit y (y=" "0,1" bitfld.long 0x0 4. "LCK4,Port x lock bit y (y=" "0,1" bitfld.long 0x0 3. "LCK3,Port x lock bit y (y=" "0,1" bitfld.long 0x0 2. "LCK2,Port x lock bit y (y=" "0,1" bitfld.long 0x0 1. "LCK1,Port x lock bit y (y=" "0,1" bitfld.long 0x0 0. "LCK0,Port x lock bit y (y=" "0,1" line.long 0x4 "AFRL,GPIO alternate function low" hexmask.long.byte 0x4 28.--31. 1. "AFRL7,Alternate function selection for port x" hexmask.long.byte 0x4 24.--27. 1. "AFRL6,Alternate function selection for port x" hexmask.long.byte 0x4 20.--23. 1. "AFRL5,Alternate function selection for port x" hexmask.long.byte 0x4 16.--19. 1. "AFRL4,Alternate function selection for port x" hexmask.long.byte 0x4 12.--15. 1. "AFRL3,Alternate function selection for port x" hexmask.long.byte 0x4 8.--11. 1. "AFRL2,Alternate function selection for port x" hexmask.long.byte 0x4 4.--7. 1. "AFRL1,Alternate function selection for port x" hexmask.long.byte 0x4 0.--3. 1. "AFRL0,Alternate function selection for port x" line.long 0x8 "AFRH,GPIO alternate function high" hexmask.long.byte 0x8 28.--31. 1. "AFRH15,Alternate function selection for port x" hexmask.long.byte 0x8 24.--27. 1. "AFRH14,Alternate function selection for port x" hexmask.long.byte 0x8 20.--23. 1. "AFRH13,Alternate function selection for port x" hexmask.long.byte 0x8 16.--19. 1. "AFRH12,Alternate function selection for port x" hexmask.long.byte 0x8 12.--15. 1. "AFRH11,Alternate function selection for port x" hexmask.long.byte 0x8 8.--11. 1. "AFRH10,Alternate function selection for port x" hexmask.long.byte 0x8 4.--7. 1. "AFRH9,Alternate function selection for port x" hexmask.long.byte 0x8 0.--3. 1. "AFRH8,Alternate function selection for port x" wgroup.long 0x28++0x3 line.long 0x0 "BRR,Port bit reset register" bitfld.long 0x0 15. "BR15,Port x Reset bit y" "0,1" bitfld.long 0x0 14. "BR14,Port x Reset bit y" "0,1" bitfld.long 0x0 13. "BR13,Port x Reset bit y" "0,1" bitfld.long 0x0 12. "BR12,Port x Reset bit y" "0,1" bitfld.long 0x0 11. "BR11,Port x Reset bit y" "0,1" bitfld.long 0x0 10. "BR10,Port x Reset bit y" "0,1" bitfld.long 0x0 9. "BR9,Port x Reset bit y" "0,1" bitfld.long 0x0 8. "BR8,Port x Reset bit y" "0,1" bitfld.long 0x0 7. "BR7,Port x Reset bit y" "0,1" bitfld.long 0x0 6. "BR6,Port x Reset bit y" "0,1" newline bitfld.long 0x0 5. "BR5,Port x Reset bit y" "0,1" bitfld.long 0x0 4. "BR4,Port x Reset bit y" "0,1" bitfld.long 0x0 3. "BR3,Port x Reset bit y" "0,1" bitfld.long 0x0 2. "BR2,Port x Reset bit y" "0,1" bitfld.long 0x0 1. "BR1,Port x Reset bit y" "0,1" bitfld.long 0x0 0. "BR0,Port x Reset bit y" "0,1" tree.end endif tree "GPIOA" base ad:0x48000000 group.long 0x0++0xF line.long 0x0 "MODER,GPIO port mode register" bitfld.long 0x0 30.--31. "MODER15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 28.--29. "MODER14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 26.--27. "MODER13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 24.--25. "MODER12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 22.--23. "MODER11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 20.--21. "MODER10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 18.--19. "MODER9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 16.--17. "MODER8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 14.--15. "MODER7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 12.--13. "MODER6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x0 10.--11. "MODER5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 8.--9. "MODER4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 6.--7. "MODER3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 4.--5. "MODER2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 2.--3. "MODER1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 0.--1. "MODER0,Port x configuration bits (y =" "0,1,2,3" line.long 0x4 "OTYPER,GPIO port output type register" bitfld.long 0x4 15. "OT15,Port x configuration bits (y =" "0,1" bitfld.long 0x4 14. "OT14,Port x configuration bits (y =" "0,1" bitfld.long 0x4 13. "OT13,Port x configuration bits (y =" "0,1" bitfld.long 0x4 12. "OT12,Port x configuration bits (y =" "0,1" bitfld.long 0x4 11. "OT11,Port x configuration bits (y =" "0,1" bitfld.long 0x4 10. "OT10,Port x configuration bits (y =" "0,1" bitfld.long 0x4 9. "OT9,Port x configuration bits (y =" "0,1" bitfld.long 0x4 8. "OT8,Port x configuration bits (y =" "0,1" bitfld.long 0x4 7. "OT7,Port x configuration bits (y =" "0,1" bitfld.long 0x4 6. "OT6,Port x configuration bits (y =" "0,1" newline bitfld.long 0x4 5. "OT5,Port x configuration bits (y =" "0,1" bitfld.long 0x4 4. "OT4,Port x configuration bits (y =" "0,1" bitfld.long 0x4 3. "OT3,Port x configuration bits (y =" "0,1" bitfld.long 0x4 2. "OT2,Port x configuration bits (y =" "0,1" bitfld.long 0x4 1. "OT1,Port x configuration bits (y =" "0,1" bitfld.long 0x4 0. "OT0,Port x configuration bits (y =" "0,1" line.long 0x8 "OSPEEDR,GPIO port output speed" bitfld.long 0x8 30.--31. "OSPEEDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 28.--29. "OSPEEDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 26.--27. "OSPEEDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 24.--25. "OSPEEDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 22.--23. "OSPEEDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 20.--21. "OSPEEDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 18.--19. "OSPEEDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 16.--17. "OSPEEDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 14.--15. "OSPEEDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 12.--13. "OSPEEDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x8 10.--11. "OSPEEDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 8.--9. "OSPEEDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 6.--7. "OSPEEDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 4.--5. "OSPEEDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 2.--3. "OSPEEDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 0.--1. "OSPEEDR0,Port x configuration bits (y =" "0,1,2,3" line.long 0xC "PUPDR,GPIO port pull-up/pull-down" bitfld.long 0xC 30.--31. "PUPDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 28.--29. "PUPDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 26.--27. "PUPDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 24.--25. "PUPDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 22.--23. "PUPDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 20.--21. "PUPDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 18.--19. "PUPDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 16.--17. "PUPDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 14.--15. "PUPDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 12.--13. "PUPDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0xC 10.--11. "PUPDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 8.--9. "PUPDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 6.--7. "PUPDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 4.--5. "PUPDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 2.--3. "PUPDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 0.--1. "PUPDR0,Port x configuration bits (y =" "0,1,2,3" rgroup.long 0x10++0x3 line.long 0x0 "IDR,GPIO port input data register" bitfld.long 0x0 15. "IDR15,Port input data (y =" "0,1" bitfld.long 0x0 14. "IDR14,Port input data (y =" "0,1" bitfld.long 0x0 13. "IDR13,Port input data (y =" "0,1" bitfld.long 0x0 12. "IDR12,Port input data (y =" "0,1" bitfld.long 0x0 11. "IDR11,Port input data (y =" "0,1" bitfld.long 0x0 10. "IDR10,Port input data (y =" "0,1" bitfld.long 0x0 9. "IDR9,Port input data (y =" "0,1" bitfld.long 0x0 8. "IDR8,Port input data (y =" "0,1" bitfld.long 0x0 7. "IDR7,Port input data (y =" "0,1" bitfld.long 0x0 6. "IDR6,Port input data (y =" "0,1" newline bitfld.long 0x0 5. "IDR5,Port input data (y =" "0,1" bitfld.long 0x0 4. "IDR4,Port input data (y =" "0,1" bitfld.long 0x0 3. "IDR3,Port input data (y =" "0,1" bitfld.long 0x0 2. "IDR2,Port input data (y =" "0,1" bitfld.long 0x0 1. "IDR1,Port input data (y =" "0,1" bitfld.long 0x0 0. "IDR0,Port input data (y =" "0,1" group.long 0x14++0x3 line.long 0x0 "ODR,GPIO port output data register" bitfld.long 0x0 15. "ODR15,Port output data (y =" "0,1" bitfld.long 0x0 14. "ODR14,Port output data (y =" "0,1" bitfld.long 0x0 13. "ODR13,Port output data (y =" "0,1" bitfld.long 0x0 12. "ODR12,Port output data (y =" "0,1" bitfld.long 0x0 11. "ODR11,Port output data (y =" "0,1" bitfld.long 0x0 10. "ODR10,Port output data (y =" "0,1" bitfld.long 0x0 9. "ODR9,Port output data (y =" "0,1" bitfld.long 0x0 8. "ODR8,Port output data (y =" "0,1" bitfld.long 0x0 7. "ODR7,Port output data (y =" "0,1" bitfld.long 0x0 6. "ODR6,Port output data (y =" "0,1" newline bitfld.long 0x0 5. "ODR5,Port output data (y =" "0,1" bitfld.long 0x0 4. "ODR4,Port output data (y =" "0,1" bitfld.long 0x0 3. "ODR3,Port output data (y =" "0,1" bitfld.long 0x0 2. "ODR2,Port output data (y =" "0,1" bitfld.long 0x0 1. "ODR1,Port output data (y =" "0,1" bitfld.long 0x0 0. "ODR0,Port output data (y =" "0,1" wgroup.long 0x18++0x3 line.long 0x0 "BSRR,GPIO port bit set/reset" bitfld.long 0x0 31. "BR15,Port x reset bit y (y =" "0,1" bitfld.long 0x0 30. "BR14,Port x reset bit y (y =" "0,1" bitfld.long 0x0 29. "BR13,Port x reset bit y (y =" "0,1" bitfld.long 0x0 28. "BR12,Port x reset bit y (y =" "0,1" bitfld.long 0x0 27. "BR11,Port x reset bit y (y =" "0,1" bitfld.long 0x0 26. "BR10,Port x reset bit y (y =" "0,1" bitfld.long 0x0 25. "BR9,Port x reset bit y (y =" "0,1" bitfld.long 0x0 24. "BR8,Port x reset bit y (y =" "0,1" bitfld.long 0x0 23. "BR7,Port x reset bit y (y =" "0,1" bitfld.long 0x0 22. "BR6,Port x reset bit y (y =" "0,1" newline bitfld.long 0x0 21. "BR5,Port x reset bit y (y =" "0,1" bitfld.long 0x0 20. "BR4,Port x reset bit y (y =" "0,1" bitfld.long 0x0 19. "BR3,Port x reset bit y (y =" "0,1" bitfld.long 0x0 18. "BR2,Port x reset bit y (y =" "0,1" bitfld.long 0x0 17. "BR1,Port x reset bit y (y =" "0,1" bitfld.long 0x0 16. "BR0,Port x set bit y (y=" "0,1" bitfld.long 0x0 15. "BS15,Port x set bit y (y=" "0,1" bitfld.long 0x0 14. "BS14,Port x set bit y (y=" "0,1" bitfld.long 0x0 13. "BS13,Port x set bit y (y=" "0,1" bitfld.long 0x0 12. "BS12,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 11. "BS11,Port x set bit y (y=" "0,1" bitfld.long 0x0 10. "BS10,Port x set bit y (y=" "0,1" bitfld.long 0x0 9. "BS9,Port x set bit y (y=" "0,1" bitfld.long 0x0 8. "BS8,Port x set bit y (y=" "0,1" bitfld.long 0x0 7. "BS7,Port x set bit y (y=" "0,1" bitfld.long 0x0 6. "BS6,Port x set bit y (y=" "0,1" bitfld.long 0x0 5. "BS5,Port x set bit y (y=" "0,1" bitfld.long 0x0 4. "BS4,Port x set bit y (y=" "0,1" bitfld.long 0x0 3. "BS3,Port x set bit y (y=" "0,1" bitfld.long 0x0 2. "BS2,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 1. "BS1,Port x set bit y (y=" "0,1" bitfld.long 0x0 0. "BS0,Port x set bit y (y=" "0,1" group.long 0x1C++0xB line.long 0x0 "LCKR,GPIO port configuration lock" bitfld.long 0x0 16. "LCKK,Port x lock bit y (y=" "0,1" bitfld.long 0x0 15. "LCK15,Port x lock bit y (y=" "0,1" bitfld.long 0x0 14. "LCK14,Port x lock bit y (y=" "0,1" bitfld.long 0x0 13. "LCK13,Port x lock bit y (y=" "0,1" bitfld.long 0x0 12. "LCK12,Port x lock bit y (y=" "0,1" bitfld.long 0x0 11. "LCK11,Port x lock bit y (y=" "0,1" bitfld.long 0x0 10. "LCK10,Port x lock bit y (y=" "0,1" bitfld.long 0x0 9. "LCK9,Port x lock bit y (y=" "0,1" bitfld.long 0x0 8. "LCK8,Port x lock bit y (y=" "0,1" bitfld.long 0x0 7. "LCK7,Port x lock bit y (y=" "0,1" newline bitfld.long 0x0 6. "LCK6,Port x lock bit y (y=" "0,1" bitfld.long 0x0 5. "LCK5,Port x lock bit y (y=" "0,1" bitfld.long 0x0 4. "LCK4,Port x lock bit y (y=" "0,1" bitfld.long 0x0 3. "LCK3,Port x lock bit y (y=" "0,1" bitfld.long 0x0 2. "LCK2,Port x lock bit y (y=" "0,1" bitfld.long 0x0 1. "LCK1,Port x lock bit y (y=" "0,1" bitfld.long 0x0 0. "LCK0,Port x lock bit y (y=" "0,1" line.long 0x4 "AFRL,GPIO alternate function low" hexmask.long.byte 0x4 28.--31. 1. "AFRL7,Alternate function selection for port x" hexmask.long.byte 0x4 24.--27. 1. "AFRL6,Alternate function selection for port x" hexmask.long.byte 0x4 20.--23. 1. "AFRL5,Alternate function selection for port x" hexmask.long.byte 0x4 16.--19. 1. "AFRL4,Alternate function selection for port x" hexmask.long.byte 0x4 12.--15. 1. "AFRL3,Alternate function selection for port x" hexmask.long.byte 0x4 8.--11. 1. "AFRL2,Alternate function selection for port x" hexmask.long.byte 0x4 4.--7. 1. "AFRL1,Alternate function selection for port x" hexmask.long.byte 0x4 0.--3. 1. "AFRL0,Alternate function selection for port x" line.long 0x8 "AFRH,GPIO alternate function high" hexmask.long.byte 0x8 28.--31. 1. "AFRH15,Alternate function selection for port x" hexmask.long.byte 0x8 24.--27. 1. "AFRH14,Alternate function selection for port x" hexmask.long.byte 0x8 20.--23. 1. "AFRH13,Alternate function selection for port x" hexmask.long.byte 0x8 16.--19. 1. "AFRH12,Alternate function selection for port x" hexmask.long.byte 0x8 12.--15. 1. "AFRH11,Alternate function selection for port x" hexmask.long.byte 0x8 8.--11. 1. "AFRH10,Alternate function selection for port x" hexmask.long.byte 0x8 4.--7. 1. "AFRH9,Alternate function selection for port x" hexmask.long.byte 0x8 0.--3. 1. "AFRH8,Alternate function selection for port x" wgroup.long 0x28++0x3 line.long 0x0 "BRR,Port bit reset register" bitfld.long 0x0 15. "BR15,Port x Reset bit y" "0,1" bitfld.long 0x0 14. "BR14,Port x Reset bit y" "0,1" bitfld.long 0x0 13. "BR13,Port x Reset bit y" "0,1" bitfld.long 0x0 12. "BR12,Port x Reset bit y" "0,1" bitfld.long 0x0 11. "BR11,Port x Reset bit y" "0,1" bitfld.long 0x0 10. "BR10,Port x Reset bit y" "0,1" bitfld.long 0x0 9. "BR9,Port x Reset bit y" "0,1" bitfld.long 0x0 8. "BR8,Port x Reset bit y" "0,1" bitfld.long 0x0 7. "BR7,Port x Reset bit y" "0,1" bitfld.long 0x0 6. "BR6,Port x Reset bit y" "0,1" newline bitfld.long 0x0 5. "BR5,Port x Reset bit y" "0,1" bitfld.long 0x0 4. "BR4,Port x Reset bit y" "0,1" bitfld.long 0x0 3. "BR3,Port x Reset bit y" "0,1" bitfld.long 0x0 2. "BR2,Port x Reset bit y" "0,1" bitfld.long 0x0 1. "BR1,Port x Reset bit y" "0,1" bitfld.long 0x0 0. "BR0,Port x Reset bit y" "0,1" tree.end tree "GPIOB" base ad:0x48000400 group.long 0x0++0xF line.long 0x0 "MODER,GPIO port mode register" bitfld.long 0x0 30.--31. "MODER15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 28.--29. "MODER14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 26.--27. "MODER13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 24.--25. "MODER12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 22.--23. "MODER11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 20.--21. "MODER10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 18.--19. "MODER9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 16.--17. "MODER8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 14.--15. "MODER7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 12.--13. "MODER6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x0 10.--11. "MODER5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 8.--9. "MODER4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 6.--7. "MODER3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 4.--5. "MODER2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 2.--3. "MODER1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 0.--1. "MODER0,Port x configuration bits (y =" "0,1,2,3" line.long 0x4 "OTYPER,GPIO port output type register" bitfld.long 0x4 15. "OT15,Port x configuration bit" "0,1" bitfld.long 0x4 14. "OT14,Port x configuration bit" "0,1" bitfld.long 0x4 13. "OT13,Port x configuration bit" "0,1" bitfld.long 0x4 12. "OT12,Port x configuration bit" "0,1" bitfld.long 0x4 11. "OT11,Port x configuration bit" "0,1" bitfld.long 0x4 10. "OT10,Port x configuration bit" "0,1" bitfld.long 0x4 9. "OT9,Port x configuration bit 9" "0,1" bitfld.long 0x4 8. "OT8,Port x configuration bit 8" "0,1" bitfld.long 0x4 7. "OT7,Port x configuration bit 7" "0,1" bitfld.long 0x4 6. "OT6,Port x configuration bit 6" "0,1" newline bitfld.long 0x4 5. "OT5,Port x configuration bit 5" "0,1" bitfld.long 0x4 4. "OT4,Port x configuration bit 4" "0,1" bitfld.long 0x4 3. "OT3,Port x configuration bit 3" "0,1" bitfld.long 0x4 2. "OT2,Port x configuration bit 2" "0,1" bitfld.long 0x4 1. "OT1,Port x configuration bit 1" "0,1" bitfld.long 0x4 0. "OT0,Port x configuration bit 0" "0,1" line.long 0x8 "OSPEEDR,GPIO port output speed" bitfld.long 0x8 30.--31. "OSPEEDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 28.--29. "OSPEEDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 26.--27. "OSPEEDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 24.--25. "OSPEEDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 22.--23. "OSPEEDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 20.--21. "OSPEEDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 18.--19. "OSPEEDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 16.--17. "OSPEEDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 14.--15. "OSPEEDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 12.--13. "OSPEEDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x8 10.--11. "OSPEEDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 8.--9. "OSPEEDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 6.--7. "OSPEEDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 4.--5. "OSPEEDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 2.--3. "OSPEEDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 0.--1. "OSPEEDR0,Port x configuration bits (y =" "0,1,2,3" line.long 0xC "PUPDR,GPIO port pull-up/pull-down" bitfld.long 0xC 30.--31. "PUPDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 28.--29. "PUPDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 26.--27. "PUPDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 24.--25. "PUPDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 22.--23. "PUPDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 20.--21. "PUPDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 18.--19. "PUPDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 16.--17. "PUPDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 14.--15. "PUPDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 12.--13. "PUPDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0xC 10.--11. "PUPDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 8.--9. "PUPDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 6.--7. "PUPDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 4.--5. "PUPDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 2.--3. "PUPDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 0.--1. "PUPDR0,Port x configuration bits (y =" "0,1,2,3" rgroup.long 0x10++0x3 line.long 0x0 "IDR,GPIO port input data register" bitfld.long 0x0 15. "IDR15,Port input data (y =" "0,1" bitfld.long 0x0 14. "IDR14,Port input data (y =" "0,1" bitfld.long 0x0 13. "IDR13,Port input data (y =" "0,1" bitfld.long 0x0 12. "IDR12,Port input data (y =" "0,1" bitfld.long 0x0 11. "IDR11,Port input data (y =" "0,1" bitfld.long 0x0 10. "IDR10,Port input data (y =" "0,1" bitfld.long 0x0 9. "IDR9,Port input data (y =" "0,1" bitfld.long 0x0 8. "IDR8,Port input data (y =" "0,1" bitfld.long 0x0 7. "IDR7,Port input data (y =" "0,1" bitfld.long 0x0 6. "IDR6,Port input data (y =" "0,1" newline bitfld.long 0x0 5. "IDR5,Port input data (y =" "0,1" bitfld.long 0x0 4. "IDR4,Port input data (y =" "0,1" bitfld.long 0x0 3. "IDR3,Port input data (y =" "0,1" bitfld.long 0x0 2. "IDR2,Port input data (y =" "0,1" bitfld.long 0x0 1. "IDR1,Port input data (y =" "0,1" bitfld.long 0x0 0. "IDR0,Port input data (y =" "0,1" group.long 0x14++0x3 line.long 0x0 "ODR,GPIO port output data register" bitfld.long 0x0 15. "ODR15,Port output data (y =" "0,1" bitfld.long 0x0 14. "ODR14,Port output data (y =" "0,1" bitfld.long 0x0 13. "ODR13,Port output data (y =" "0,1" bitfld.long 0x0 12. "ODR12,Port output data (y =" "0,1" bitfld.long 0x0 11. "ODR11,Port output data (y =" "0,1" bitfld.long 0x0 10. "ODR10,Port output data (y =" "0,1" bitfld.long 0x0 9. "ODR9,Port output data (y =" "0,1" bitfld.long 0x0 8. "ODR8,Port output data (y =" "0,1" bitfld.long 0x0 7. "ODR7,Port output data (y =" "0,1" bitfld.long 0x0 6. "ODR6,Port output data (y =" "0,1" newline bitfld.long 0x0 5. "ODR5,Port output data (y =" "0,1" bitfld.long 0x0 4. "ODR4,Port output data (y =" "0,1" bitfld.long 0x0 3. "ODR3,Port output data (y =" "0,1" bitfld.long 0x0 2. "ODR2,Port output data (y =" "0,1" bitfld.long 0x0 1. "ODR1,Port output data (y =" "0,1" bitfld.long 0x0 0. "ODR0,Port output data (y =" "0,1" wgroup.long 0x18++0x3 line.long 0x0 "BSRR,GPIO port bit set/reset" bitfld.long 0x0 31. "BR15,Port x reset bit y (y =" "0,1" bitfld.long 0x0 30. "BR14,Port x reset bit y (y =" "0,1" bitfld.long 0x0 29. "BR13,Port x reset bit y (y =" "0,1" bitfld.long 0x0 28. "BR12,Port x reset bit y (y =" "0,1" bitfld.long 0x0 27. "BR11,Port x reset bit y (y =" "0,1" bitfld.long 0x0 26. "BR10,Port x reset bit y (y =" "0,1" bitfld.long 0x0 25. "BR9,Port x reset bit y (y =" "0,1" bitfld.long 0x0 24. "BR8,Port x reset bit y (y =" "0,1" bitfld.long 0x0 23. "BR7,Port x reset bit y (y =" "0,1" bitfld.long 0x0 22. "BR6,Port x reset bit y (y =" "0,1" newline bitfld.long 0x0 21. "BR5,Port x reset bit y (y =" "0,1" bitfld.long 0x0 20. "BR4,Port x reset bit y (y =" "0,1" bitfld.long 0x0 19. "BR3,Port x reset bit y (y =" "0,1" bitfld.long 0x0 18. "BR2,Port x reset bit y (y =" "0,1" bitfld.long 0x0 17. "BR1,Port x reset bit y (y =" "0,1" bitfld.long 0x0 16. "BR0,Port x set bit y (y=" "0,1" bitfld.long 0x0 15. "BS15,Port x set bit y (y=" "0,1" bitfld.long 0x0 14. "BS14,Port x set bit y (y=" "0,1" bitfld.long 0x0 13. "BS13,Port x set bit y (y=" "0,1" bitfld.long 0x0 12. "BS12,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 11. "BS11,Port x set bit y (y=" "0,1" bitfld.long 0x0 10. "BS10,Port x set bit y (y=" "0,1" bitfld.long 0x0 9. "BS9,Port x set bit y (y=" "0,1" bitfld.long 0x0 8. "BS8,Port x set bit y (y=" "0,1" bitfld.long 0x0 7. "BS7,Port x set bit y (y=" "0,1" bitfld.long 0x0 6. "BS6,Port x set bit y (y=" "0,1" bitfld.long 0x0 5. "BS5,Port x set bit y (y=" "0,1" bitfld.long 0x0 4. "BS4,Port x set bit y (y=" "0,1" bitfld.long 0x0 3. "BS3,Port x set bit y (y=" "0,1" bitfld.long 0x0 2. "BS2,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 1. "BS1,Port x set bit y (y=" "0,1" bitfld.long 0x0 0. "BS0,Port x set bit y (y=" "0,1" group.long 0x1C++0xB line.long 0x0 "LCKR,GPIO port configuration lock" bitfld.long 0x0 16. "LCKK,Port x lock bit y" "0,1" bitfld.long 0x0 15. "LCK15,Port x lock bit y (y=" "0,1" bitfld.long 0x0 14. "LCK14,Port x lock bit y (y=" "0,1" bitfld.long 0x0 13. "LCK13,Port x lock bit y (y=" "0,1" bitfld.long 0x0 12. "LCK12,Port x lock bit y (y=" "0,1" bitfld.long 0x0 11. "LCK11,Port x lock bit y (y=" "0,1" bitfld.long 0x0 10. "LCK10,Port x lock bit y (y=" "0,1" bitfld.long 0x0 9. "LCK9,Port x lock bit y (y=" "0,1" bitfld.long 0x0 8. "LCK8,Port x lock bit y (y=" "0,1" bitfld.long 0x0 7. "LCK7,Port x lock bit y (y=" "0,1" newline bitfld.long 0x0 6. "LCK6,Port x lock bit y (y=" "0,1" bitfld.long 0x0 5. "LCK5,Port x lock bit y (y=" "0,1" bitfld.long 0x0 4. "LCK4,Port x lock bit y (y=" "0,1" bitfld.long 0x0 3. "LCK3,Port x lock bit y (y=" "0,1" bitfld.long 0x0 2. "LCK2,Port x lock bit y (y=" "0,1" bitfld.long 0x0 1. "LCK1,Port x lock bit y (y=" "0,1" bitfld.long 0x0 0. "LCK0,Port x lock bit y (y=" "0,1" line.long 0x4 "AFRL,GPIO alternate function low" hexmask.long.byte 0x4 28.--31. 1. "AFRL7,Alternate function selection for port x" hexmask.long.byte 0x4 24.--27. 1. "AFRL6,Alternate function selection for port x" hexmask.long.byte 0x4 20.--23. 1. "AFRL5,Alternate function selection for port x" hexmask.long.byte 0x4 16.--19. 1. "AFRL4,Alternate function selection for port x" hexmask.long.byte 0x4 12.--15. 1. "AFRL3,Alternate function selection for port x" hexmask.long.byte 0x4 8.--11. 1. "AFRL2,Alternate function selection for port x" hexmask.long.byte 0x4 4.--7. 1. "AFRL1,Alternate function selection for port x" hexmask.long.byte 0x4 0.--3. 1. "AFRL0,Alternate function selection for port x" line.long 0x8 "AFRH,GPIO alternate function high" hexmask.long.byte 0x8 28.--31. 1. "AFRH15,Alternate function selection for port x" hexmask.long.byte 0x8 24.--27. 1. "AFRH14,Alternate function selection for port x" hexmask.long.byte 0x8 20.--23. 1. "AFRH13,Alternate function selection for port x" hexmask.long.byte 0x8 16.--19. 1. "AFRH12,Alternate function selection for port x" hexmask.long.byte 0x8 12.--15. 1. "AFRH11,Alternate function selection for port x" hexmask.long.byte 0x8 8.--11. 1. "AFRH10,Alternate function selection for port x" hexmask.long.byte 0x8 4.--7. 1. "AFRH9,Alternate function selection for port x" hexmask.long.byte 0x8 0.--3. 1. "AFRH8,Alternate function selection for port x" wgroup.long 0x28++0x3 line.long 0x0 "BRR,Port bit reset register" bitfld.long 0x0 15. "BR15,Port x Reset bit y" "0,1" bitfld.long 0x0 14. "BR14,Port x Reset bit y" "0,1" bitfld.long 0x0 13. "BR13,Port x Reset bit y" "0,1" bitfld.long 0x0 12. "BR12,Port x Reset bit y" "0,1" bitfld.long 0x0 11. "BR11,Port x Reset bit y" "0,1" bitfld.long 0x0 10. "BR10,Port x Reset bit y" "0,1" bitfld.long 0x0 9. "BR9,Port x Reset bit y" "0,1" bitfld.long 0x0 8. "BR8,Port x Reset bit y" "0,1" bitfld.long 0x0 7. "BR7,Port x Reset bit y" "0,1" bitfld.long 0x0 6. "BR6,Port x Reset bit y" "0,1" newline bitfld.long 0x0 5. "BR5,Port x Reset bit y" "0,1" bitfld.long 0x0 4. "BR4,Port x Reset bit y" "0,1" bitfld.long 0x0 3. "BR3,Port x Reset bit y" "0,1" bitfld.long 0x0 2. "BR2,Port x Reset bit y" "0,1" bitfld.long 0x0 1. "BR1,Port x Reset bit y" "0,1" bitfld.long 0x0 0. "BR0,Port x Reset bit y" "0,1" tree.end tree "GPIOC" base ad:0x48000800 group.long 0x0++0xF line.long 0x0 "MODER,GPIO port mode register" bitfld.long 0x0 30.--31. "MODER15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 28.--29. "MODER14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 26.--27. "MODER13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 24.--25. "MODER12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 22.--23. "MODER11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 20.--21. "MODER10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 18.--19. "MODER9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 16.--17. "MODER8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 14.--15. "MODER7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 12.--13. "MODER6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x0 10.--11. "MODER5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 8.--9. "MODER4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 6.--7. "MODER3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 4.--5. "MODER2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 2.--3. "MODER1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 0.--1. "MODER0,Port x configuration bits (y =" "0,1,2,3" line.long 0x4 "OTYPER,GPIO port output type register" bitfld.long 0x4 15. "OT15,Port x configuration bit" "0,1" bitfld.long 0x4 14. "OT14,Port x configuration bit" "0,1" bitfld.long 0x4 13. "OT13,Port x configuration bit" "0,1" bitfld.long 0x4 12. "OT12,Port x configuration bit" "0,1" bitfld.long 0x4 11. "OT11,Port x configuration bit" "0,1" bitfld.long 0x4 10. "OT10,Port x configuration bit" "0,1" bitfld.long 0x4 9. "OT9,Port x configuration bit 9" "0,1" bitfld.long 0x4 8. "OT8,Port x configuration bit 8" "0,1" bitfld.long 0x4 7. "OT7,Port x configuration bit 7" "0,1" bitfld.long 0x4 6. "OT6,Port x configuration bit 6" "0,1" newline bitfld.long 0x4 5. "OT5,Port x configuration bit 5" "0,1" bitfld.long 0x4 4. "OT4,Port x configuration bit 4" "0,1" bitfld.long 0x4 3. "OT3,Port x configuration bit 3" "0,1" bitfld.long 0x4 2. "OT2,Port x configuration bit 2" "0,1" bitfld.long 0x4 1. "OT1,Port x configuration bit 1" "0,1" bitfld.long 0x4 0. "OT0,Port x configuration bit 0" "0,1" line.long 0x8 "OSPEEDR,GPIO port output speed" bitfld.long 0x8 30.--31. "OSPEEDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 28.--29. "OSPEEDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 26.--27. "OSPEEDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 24.--25. "OSPEEDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 22.--23. "OSPEEDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 20.--21. "OSPEEDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 18.--19. "OSPEEDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 16.--17. "OSPEEDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 14.--15. "OSPEEDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 12.--13. "OSPEEDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x8 10.--11. "OSPEEDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 8.--9. "OSPEEDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 6.--7. "OSPEEDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 4.--5. "OSPEEDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 2.--3. "OSPEEDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 0.--1. "OSPEEDR0,Port x configuration bits (y =" "0,1,2,3" line.long 0xC "PUPDR,GPIO port pull-up/pull-down" bitfld.long 0xC 30.--31. "PUPDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 28.--29. "PUPDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 26.--27. "PUPDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 24.--25. "PUPDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 22.--23. "PUPDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 20.--21. "PUPDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 18.--19. "PUPDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 16.--17. "PUPDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 14.--15. "PUPDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 12.--13. "PUPDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0xC 10.--11. "PUPDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 8.--9. "PUPDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 6.--7. "PUPDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 4.--5. "PUPDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 2.--3. "PUPDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 0.--1. "PUPDR0,Port x configuration bits (y =" "0,1,2,3" rgroup.long 0x10++0x3 line.long 0x0 "IDR,GPIO port input data register" bitfld.long 0x0 15. "IDR15,Port input data (y =" "0,1" bitfld.long 0x0 14. "IDR14,Port input data (y =" "0,1" bitfld.long 0x0 13. "IDR13,Port input data (y =" "0,1" bitfld.long 0x0 12. "IDR12,Port input data (y =" "0,1" bitfld.long 0x0 11. "IDR11,Port input data (y =" "0,1" bitfld.long 0x0 10. "IDR10,Port input data (y =" "0,1" bitfld.long 0x0 9. "IDR9,Port input data (y =" "0,1" bitfld.long 0x0 8. "IDR8,Port input data (y =" "0,1" bitfld.long 0x0 7. "IDR7,Port input data (y =" "0,1" bitfld.long 0x0 6. "IDR6,Port input data (y =" "0,1" newline bitfld.long 0x0 5. "IDR5,Port input data (y =" "0,1" bitfld.long 0x0 4. "IDR4,Port input data (y =" "0,1" bitfld.long 0x0 3. "IDR3,Port input data (y =" "0,1" bitfld.long 0x0 2. "IDR2,Port input data (y =" "0,1" bitfld.long 0x0 1. "IDR1,Port input data (y =" "0,1" bitfld.long 0x0 0. "IDR0,Port input data (y =" "0,1" group.long 0x14++0x3 line.long 0x0 "ODR,GPIO port output data register" bitfld.long 0x0 15. "ODR15,Port output data (y =" "0,1" bitfld.long 0x0 14. "ODR14,Port output data (y =" "0,1" bitfld.long 0x0 13. "ODR13,Port output data (y =" "0,1" bitfld.long 0x0 12. "ODR12,Port output data (y =" "0,1" bitfld.long 0x0 11. "ODR11,Port output data (y =" "0,1" bitfld.long 0x0 10. "ODR10,Port output data (y =" "0,1" bitfld.long 0x0 9. "ODR9,Port output data (y =" "0,1" bitfld.long 0x0 8. "ODR8,Port output data (y =" "0,1" bitfld.long 0x0 7. "ODR7,Port output data (y =" "0,1" bitfld.long 0x0 6. "ODR6,Port output data (y =" "0,1" newline bitfld.long 0x0 5. "ODR5,Port output data (y =" "0,1" bitfld.long 0x0 4. "ODR4,Port output data (y =" "0,1" bitfld.long 0x0 3. "ODR3,Port output data (y =" "0,1" bitfld.long 0x0 2. "ODR2,Port output data (y =" "0,1" bitfld.long 0x0 1. "ODR1,Port output data (y =" "0,1" bitfld.long 0x0 0. "ODR0,Port output data (y =" "0,1" wgroup.long 0x18++0x3 line.long 0x0 "BSRR,GPIO port bit set/reset" bitfld.long 0x0 31. "BR15,Port x reset bit y (y =" "0,1" bitfld.long 0x0 30. "BR14,Port x reset bit y (y =" "0,1" bitfld.long 0x0 29. "BR13,Port x reset bit y (y =" "0,1" bitfld.long 0x0 28. "BR12,Port x reset bit y (y =" "0,1" bitfld.long 0x0 27. "BR11,Port x reset bit y (y =" "0,1" bitfld.long 0x0 26. "BR10,Port x reset bit y (y =" "0,1" bitfld.long 0x0 25. "BR9,Port x reset bit y (y =" "0,1" bitfld.long 0x0 24. "BR8,Port x reset bit y (y =" "0,1" bitfld.long 0x0 23. "BR7,Port x reset bit y (y =" "0,1" bitfld.long 0x0 22. "BR6,Port x reset bit y (y =" "0,1" newline bitfld.long 0x0 21. "BR5,Port x reset bit y (y =" "0,1" bitfld.long 0x0 20. "BR4,Port x reset bit y (y =" "0,1" bitfld.long 0x0 19. "BR3,Port x reset bit y (y =" "0,1" bitfld.long 0x0 18. "BR2,Port x reset bit y (y =" "0,1" bitfld.long 0x0 17. "BR1,Port x reset bit y (y =" "0,1" bitfld.long 0x0 16. "BR0,Port x set bit y (y=" "0,1" bitfld.long 0x0 15. "BS15,Port x set bit y (y=" "0,1" bitfld.long 0x0 14. "BS14,Port x set bit y (y=" "0,1" bitfld.long 0x0 13. "BS13,Port x set bit y (y=" "0,1" bitfld.long 0x0 12. "BS12,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 11. "BS11,Port x set bit y (y=" "0,1" bitfld.long 0x0 10. "BS10,Port x set bit y (y=" "0,1" bitfld.long 0x0 9. "BS9,Port x set bit y (y=" "0,1" bitfld.long 0x0 8. "BS8,Port x set bit y (y=" "0,1" bitfld.long 0x0 7. "BS7,Port x set bit y (y=" "0,1" bitfld.long 0x0 6. "BS6,Port x set bit y (y=" "0,1" bitfld.long 0x0 5. "BS5,Port x set bit y (y=" "0,1" bitfld.long 0x0 4. "BS4,Port x set bit y (y=" "0,1" bitfld.long 0x0 3. "BS3,Port x set bit y (y=" "0,1" bitfld.long 0x0 2. "BS2,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 1. "BS1,Port x set bit y (y=" "0,1" bitfld.long 0x0 0. "BS0,Port x set bit y (y=" "0,1" group.long 0x1C++0xB line.long 0x0 "LCKR,GPIO port configuration lock" bitfld.long 0x0 16. "LCKK,Port x lock bit y" "0,1" bitfld.long 0x0 15. "LCK15,Port x lock bit y (y=" "0,1" bitfld.long 0x0 14. "LCK14,Port x lock bit y (y=" "0,1" bitfld.long 0x0 13. "LCK13,Port x lock bit y (y=" "0,1" bitfld.long 0x0 12. "LCK12,Port x lock bit y (y=" "0,1" bitfld.long 0x0 11. "LCK11,Port x lock bit y (y=" "0,1" bitfld.long 0x0 10. "LCK10,Port x lock bit y (y=" "0,1" bitfld.long 0x0 9. "LCK9,Port x lock bit y (y=" "0,1" bitfld.long 0x0 8. "LCK8,Port x lock bit y (y=" "0,1" bitfld.long 0x0 7. "LCK7,Port x lock bit y (y=" "0,1" newline bitfld.long 0x0 6. "LCK6,Port x lock bit y (y=" "0,1" bitfld.long 0x0 5. "LCK5,Port x lock bit y (y=" "0,1" bitfld.long 0x0 4. "LCK4,Port x lock bit y (y=" "0,1" bitfld.long 0x0 3. "LCK3,Port x lock bit y (y=" "0,1" bitfld.long 0x0 2. "LCK2,Port x lock bit y (y=" "0,1" bitfld.long 0x0 1. "LCK1,Port x lock bit y (y=" "0,1" bitfld.long 0x0 0. "LCK0,Port x lock bit y (y=" "0,1" line.long 0x4 "AFRL,GPIO alternate function low" hexmask.long.byte 0x4 28.--31. 1. "AFRL7,Alternate function selection for port x" hexmask.long.byte 0x4 24.--27. 1. "AFRL6,Alternate function selection for port x" hexmask.long.byte 0x4 20.--23. 1. "AFRL5,Alternate function selection for port x" hexmask.long.byte 0x4 16.--19. 1. "AFRL4,Alternate function selection for port x" hexmask.long.byte 0x4 12.--15. 1. "AFRL3,Alternate function selection for port x" hexmask.long.byte 0x4 8.--11. 1. "AFRL2,Alternate function selection for port x" hexmask.long.byte 0x4 4.--7. 1. "AFRL1,Alternate function selection for port x" hexmask.long.byte 0x4 0.--3. 1. "AFRL0,Alternate function selection for port x" line.long 0x8 "AFRH,GPIO alternate function high" hexmask.long.byte 0x8 28.--31. 1. "AFRH15,Alternate function selection for port x" hexmask.long.byte 0x8 24.--27. 1. "AFRH14,Alternate function selection for port x" hexmask.long.byte 0x8 20.--23. 1. "AFRH13,Alternate function selection for port x" hexmask.long.byte 0x8 16.--19. 1. "AFRH12,Alternate function selection for port x" hexmask.long.byte 0x8 12.--15. 1. "AFRH11,Alternate function selection for port x" hexmask.long.byte 0x8 8.--11. 1. "AFRH10,Alternate function selection for port x" hexmask.long.byte 0x8 4.--7. 1. "AFRH9,Alternate function selection for port x" hexmask.long.byte 0x8 0.--3. 1. "AFRH8,Alternate function selection for port x" wgroup.long 0x28++0x3 line.long 0x0 "BRR,Port bit reset register" bitfld.long 0x0 15. "BR15,Port x Reset bit y" "0,1" bitfld.long 0x0 14. "BR14,Port x Reset bit y" "0,1" bitfld.long 0x0 13. "BR13,Port x Reset bit y" "0,1" bitfld.long 0x0 12. "BR12,Port x Reset bit y" "0,1" bitfld.long 0x0 11. "BR11,Port x Reset bit y" "0,1" bitfld.long 0x0 10. "BR10,Port x Reset bit y" "0,1" bitfld.long 0x0 9. "BR9,Port x Reset bit y" "0,1" bitfld.long 0x0 8. "BR8,Port x Reset bit y" "0,1" bitfld.long 0x0 7. "BR7,Port x Reset bit y" "0,1" bitfld.long 0x0 6. "BR6,Port x Reset bit y" "0,1" newline bitfld.long 0x0 5. "BR5,Port x Reset bit y" "0,1" bitfld.long 0x0 4. "BR4,Port x Reset bit y" "0,1" bitfld.long 0x0 3. "BR3,Port x Reset bit y" "0,1" bitfld.long 0x0 2. "BR2,Port x Reset bit y" "0,1" bitfld.long 0x0 1. "BR1,Port x Reset bit y" "0,1" bitfld.long 0x0 0. "BR0,Port x Reset bit y" "0,1" tree.end tree "GPIOD" base ad:0x48000C00 group.long 0x0++0xF line.long 0x0 "MODER,GPIO port mode register" bitfld.long 0x0 30.--31. "MODER15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 28.--29. "MODER14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 26.--27. "MODER13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 24.--25. "MODER12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 22.--23. "MODER11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 20.--21. "MODER10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 18.--19. "MODER9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 16.--17. "MODER8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 14.--15. "MODER7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 12.--13. "MODER6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x0 10.--11. "MODER5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 8.--9. "MODER4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 6.--7. "MODER3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 4.--5. "MODER2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 2.--3. "MODER1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 0.--1. "MODER0,Port x configuration bits (y =" "0,1,2,3" line.long 0x4 "OTYPER,GPIO port output type register" bitfld.long 0x4 15. "OT15,Port x configuration bit" "0,1" bitfld.long 0x4 14. "OT14,Port x configuration bit" "0,1" bitfld.long 0x4 13. "OT13,Port x configuration bit" "0,1" bitfld.long 0x4 12. "OT12,Port x configuration bit" "0,1" bitfld.long 0x4 11. "OT11,Port x configuration bit" "0,1" bitfld.long 0x4 10. "OT10,Port x configuration bit" "0,1" bitfld.long 0x4 9. "OT9,Port x configuration bit 9" "0,1" bitfld.long 0x4 8. "OT8,Port x configuration bit 8" "0,1" bitfld.long 0x4 7. "OT7,Port x configuration bit 7" "0,1" bitfld.long 0x4 6. "OT6,Port x configuration bit 6" "0,1" newline bitfld.long 0x4 5. "OT5,Port x configuration bit 5" "0,1" bitfld.long 0x4 4. "OT4,Port x configuration bit 4" "0,1" bitfld.long 0x4 3. "OT3,Port x configuration bit 3" "0,1" bitfld.long 0x4 2. "OT2,Port x configuration bit 2" "0,1" bitfld.long 0x4 1. "OT1,Port x configuration bit 1" "0,1" bitfld.long 0x4 0. "OT0,Port x configuration bit 0" "0,1" line.long 0x8 "OSPEEDR,GPIO port output speed" bitfld.long 0x8 30.--31. "OSPEEDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 28.--29. "OSPEEDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 26.--27. "OSPEEDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 24.--25. "OSPEEDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 22.--23. "OSPEEDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 20.--21. "OSPEEDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 18.--19. "OSPEEDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 16.--17. "OSPEEDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 14.--15. "OSPEEDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 12.--13. "OSPEEDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x8 10.--11. "OSPEEDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 8.--9. "OSPEEDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 6.--7. "OSPEEDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 4.--5. "OSPEEDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 2.--3. "OSPEEDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 0.--1. "OSPEEDR0,Port x configuration bits (y =" "0,1,2,3" line.long 0xC "PUPDR,GPIO port pull-up/pull-down" bitfld.long 0xC 30.--31. "PUPDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 28.--29. "PUPDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 26.--27. "PUPDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 24.--25. "PUPDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 22.--23. "PUPDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 20.--21. "PUPDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 18.--19. "PUPDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 16.--17. "PUPDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 14.--15. "PUPDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 12.--13. "PUPDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0xC 10.--11. "PUPDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 8.--9. "PUPDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 6.--7. "PUPDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 4.--5. "PUPDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 2.--3. "PUPDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 0.--1. "PUPDR0,Port x configuration bits (y =" "0,1,2,3" rgroup.long 0x10++0x3 line.long 0x0 "IDR,GPIO port input data register" bitfld.long 0x0 15. "IDR15,Port input data (y =" "0,1" bitfld.long 0x0 14. "IDR14,Port input data (y =" "0,1" bitfld.long 0x0 13. "IDR13,Port input data (y =" "0,1" bitfld.long 0x0 12. "IDR12,Port input data (y =" "0,1" bitfld.long 0x0 11. "IDR11,Port input data (y =" "0,1" bitfld.long 0x0 10. "IDR10,Port input data (y =" "0,1" bitfld.long 0x0 9. "IDR9,Port input data (y =" "0,1" bitfld.long 0x0 8. "IDR8,Port input data (y =" "0,1" bitfld.long 0x0 7. "IDR7,Port input data (y =" "0,1" bitfld.long 0x0 6. "IDR6,Port input data (y =" "0,1" newline bitfld.long 0x0 5. "IDR5,Port input data (y =" "0,1" bitfld.long 0x0 4. "IDR4,Port input data (y =" "0,1" bitfld.long 0x0 3. "IDR3,Port input data (y =" "0,1" bitfld.long 0x0 2. "IDR2,Port input data (y =" "0,1" bitfld.long 0x0 1. "IDR1,Port input data (y =" "0,1" bitfld.long 0x0 0. "IDR0,Port input data (y =" "0,1" group.long 0x14++0x3 line.long 0x0 "ODR,GPIO port output data register" bitfld.long 0x0 15. "ODR15,Port output data (y =" "0,1" bitfld.long 0x0 14. "ODR14,Port output data (y =" "0,1" bitfld.long 0x0 13. "ODR13,Port output data (y =" "0,1" bitfld.long 0x0 12. "ODR12,Port output data (y =" "0,1" bitfld.long 0x0 11. "ODR11,Port output data (y =" "0,1" bitfld.long 0x0 10. "ODR10,Port output data (y =" "0,1" bitfld.long 0x0 9. "ODR9,Port output data (y =" "0,1" bitfld.long 0x0 8. "ODR8,Port output data (y =" "0,1" bitfld.long 0x0 7. "ODR7,Port output data (y =" "0,1" bitfld.long 0x0 6. "ODR6,Port output data (y =" "0,1" newline bitfld.long 0x0 5. "ODR5,Port output data (y =" "0,1" bitfld.long 0x0 4. "ODR4,Port output data (y =" "0,1" bitfld.long 0x0 3. "ODR3,Port output data (y =" "0,1" bitfld.long 0x0 2. "ODR2,Port output data (y =" "0,1" bitfld.long 0x0 1. "ODR1,Port output data (y =" "0,1" bitfld.long 0x0 0. "ODR0,Port output data (y =" "0,1" wgroup.long 0x18++0x3 line.long 0x0 "BSRR,GPIO port bit set/reset" bitfld.long 0x0 31. "BR15,Port x reset bit y (y =" "0,1" bitfld.long 0x0 30. "BR14,Port x reset bit y (y =" "0,1" bitfld.long 0x0 29. "BR13,Port x reset bit y (y =" "0,1" bitfld.long 0x0 28. "BR12,Port x reset bit y (y =" "0,1" bitfld.long 0x0 27. "BR11,Port x reset bit y (y =" "0,1" bitfld.long 0x0 26. "BR10,Port x reset bit y (y =" "0,1" bitfld.long 0x0 25. "BR9,Port x reset bit y (y =" "0,1" bitfld.long 0x0 24. "BR8,Port x reset bit y (y =" "0,1" bitfld.long 0x0 23. "BR7,Port x reset bit y (y =" "0,1" bitfld.long 0x0 22. "BR6,Port x reset bit y (y =" "0,1" newline bitfld.long 0x0 21. "BR5,Port x reset bit y (y =" "0,1" bitfld.long 0x0 20. "BR4,Port x reset bit y (y =" "0,1" bitfld.long 0x0 19. "BR3,Port x reset bit y (y =" "0,1" bitfld.long 0x0 18. "BR2,Port x reset bit y (y =" "0,1" bitfld.long 0x0 17. "BR1,Port x reset bit y (y =" "0,1" bitfld.long 0x0 16. "BR0,Port x set bit y (y=" "0,1" bitfld.long 0x0 15. "BS15,Port x set bit y (y=" "0,1" bitfld.long 0x0 14. "BS14,Port x set bit y (y=" "0,1" bitfld.long 0x0 13. "BS13,Port x set bit y (y=" "0,1" bitfld.long 0x0 12. "BS12,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 11. "BS11,Port x set bit y (y=" "0,1" bitfld.long 0x0 10. "BS10,Port x set bit y (y=" "0,1" bitfld.long 0x0 9. "BS9,Port x set bit y (y=" "0,1" bitfld.long 0x0 8. "BS8,Port x set bit y (y=" "0,1" bitfld.long 0x0 7. "BS7,Port x set bit y (y=" "0,1" bitfld.long 0x0 6. "BS6,Port x set bit y (y=" "0,1" bitfld.long 0x0 5. "BS5,Port x set bit y (y=" "0,1" bitfld.long 0x0 4. "BS4,Port x set bit y (y=" "0,1" bitfld.long 0x0 3. "BS3,Port x set bit y (y=" "0,1" bitfld.long 0x0 2. "BS2,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 1. "BS1,Port x set bit y (y=" "0,1" bitfld.long 0x0 0. "BS0,Port x set bit y (y=" "0,1" group.long 0x1C++0xB line.long 0x0 "LCKR,GPIO port configuration lock" bitfld.long 0x0 16. "LCKK,Port x lock bit y" "0,1" bitfld.long 0x0 15. "LCK15,Port x lock bit y (y=" "0,1" bitfld.long 0x0 14. "LCK14,Port x lock bit y (y=" "0,1" bitfld.long 0x0 13. "LCK13,Port x lock bit y (y=" "0,1" bitfld.long 0x0 12. "LCK12,Port x lock bit y (y=" "0,1" bitfld.long 0x0 11. "LCK11,Port x lock bit y (y=" "0,1" bitfld.long 0x0 10. "LCK10,Port x lock bit y (y=" "0,1" bitfld.long 0x0 9. "LCK9,Port x lock bit y (y=" "0,1" bitfld.long 0x0 8. "LCK8,Port x lock bit y (y=" "0,1" bitfld.long 0x0 7. "LCK7,Port x lock bit y (y=" "0,1" newline bitfld.long 0x0 6. "LCK6,Port x lock bit y (y=" "0,1" bitfld.long 0x0 5. "LCK5,Port x lock bit y (y=" "0,1" bitfld.long 0x0 4. "LCK4,Port x lock bit y (y=" "0,1" bitfld.long 0x0 3. "LCK3,Port x lock bit y (y=" "0,1" bitfld.long 0x0 2. "LCK2,Port x lock bit y (y=" "0,1" bitfld.long 0x0 1. "LCK1,Port x lock bit y (y=" "0,1" bitfld.long 0x0 0. "LCK0,Port x lock bit y (y=" "0,1" line.long 0x4 "AFRL,GPIO alternate function low" hexmask.long.byte 0x4 28.--31. 1. "AFRL7,Alternate function selection for port x" hexmask.long.byte 0x4 24.--27. 1. "AFRL6,Alternate function selection for port x" hexmask.long.byte 0x4 20.--23. 1. "AFRL5,Alternate function selection for port x" hexmask.long.byte 0x4 16.--19. 1. "AFRL4,Alternate function selection for port x" hexmask.long.byte 0x4 12.--15. 1. "AFRL3,Alternate function selection for port x" hexmask.long.byte 0x4 8.--11. 1. "AFRL2,Alternate function selection for port x" hexmask.long.byte 0x4 4.--7. 1. "AFRL1,Alternate function selection for port x" hexmask.long.byte 0x4 0.--3. 1. "AFRL0,Alternate function selection for port x" line.long 0x8 "AFRH,GPIO alternate function high" hexmask.long.byte 0x8 28.--31. 1. "AFRH15,Alternate function selection for port x" hexmask.long.byte 0x8 24.--27. 1. "AFRH14,Alternate function selection for port x" hexmask.long.byte 0x8 20.--23. 1. "AFRH13,Alternate function selection for port x" hexmask.long.byte 0x8 16.--19. 1. "AFRH12,Alternate function selection for port x" hexmask.long.byte 0x8 12.--15. 1. "AFRH11,Alternate function selection for port x" hexmask.long.byte 0x8 8.--11. 1. "AFRH10,Alternate function selection for port x" hexmask.long.byte 0x8 4.--7. 1. "AFRH9,Alternate function selection for port x" hexmask.long.byte 0x8 0.--3. 1. "AFRH8,Alternate function selection for port x" wgroup.long 0x28++0x3 line.long 0x0 "BRR,Port bit reset register" bitfld.long 0x0 15. "BR15,Port x Reset bit y" "0,1" bitfld.long 0x0 14. "BR14,Port x Reset bit y" "0,1" bitfld.long 0x0 13. "BR13,Port x Reset bit y" "0,1" bitfld.long 0x0 12. "BR12,Port x Reset bit y" "0,1" bitfld.long 0x0 11. "BR11,Port x Reset bit y" "0,1" bitfld.long 0x0 10. "BR10,Port x Reset bit y" "0,1" bitfld.long 0x0 9. "BR9,Port x Reset bit y" "0,1" bitfld.long 0x0 8. "BR8,Port x Reset bit y" "0,1" bitfld.long 0x0 7. "BR7,Port x Reset bit y" "0,1" bitfld.long 0x0 6. "BR6,Port x Reset bit y" "0,1" newline bitfld.long 0x0 5. "BR5,Port x Reset bit y" "0,1" bitfld.long 0x0 4. "BR4,Port x Reset bit y" "0,1" bitfld.long 0x0 3. "BR3,Port x Reset bit y" "0,1" bitfld.long 0x0 2. "BR2,Port x Reset bit y" "0,1" bitfld.long 0x0 1. "BR1,Port x Reset bit y" "0,1" bitfld.long 0x0 0. "BR0,Port x Reset bit y" "0,1" tree.end tree "GPIOF" base ad:0x48001400 group.long 0x0++0xF line.long 0x0 "MODER,GPIO port mode register" bitfld.long 0x0 30.--31. "MODER15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 28.--29. "MODER14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 26.--27. "MODER13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 24.--25. "MODER12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 22.--23. "MODER11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 20.--21. "MODER10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 18.--19. "MODER9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 16.--17. "MODER8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 14.--15. "MODER7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 12.--13. "MODER6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x0 10.--11. "MODER5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 8.--9. "MODER4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 6.--7. "MODER3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 4.--5. "MODER2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 2.--3. "MODER1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x0 0.--1. "MODER0,Port x configuration bits (y =" "0,1,2,3" line.long 0x4 "OTYPER,GPIO port output type register" bitfld.long 0x4 15. "OT15,Port x configuration bit" "0,1" bitfld.long 0x4 14. "OT14,Port x configuration bit" "0,1" bitfld.long 0x4 13. "OT13,Port x configuration bit" "0,1" bitfld.long 0x4 12. "OT12,Port x configuration bit" "0,1" bitfld.long 0x4 11. "OT11,Port x configuration bit" "0,1" bitfld.long 0x4 10. "OT10,Port x configuration bit" "0,1" bitfld.long 0x4 9. "OT9,Port x configuration bit 9" "0,1" bitfld.long 0x4 8. "OT8,Port x configuration bit 8" "0,1" bitfld.long 0x4 7. "OT7,Port x configuration bit 7" "0,1" bitfld.long 0x4 6. "OT6,Port x configuration bit 6" "0,1" newline bitfld.long 0x4 5. "OT5,Port x configuration bit 5" "0,1" bitfld.long 0x4 4. "OT4,Port x configuration bit 4" "0,1" bitfld.long 0x4 3. "OT3,Port x configuration bit 3" "0,1" bitfld.long 0x4 2. "OT2,Port x configuration bit 2" "0,1" bitfld.long 0x4 1. "OT1,Port x configuration bit 1" "0,1" bitfld.long 0x4 0. "OT0,Port x configuration bit 0" "0,1" line.long 0x8 "OSPEEDR,GPIO port output speed" bitfld.long 0x8 30.--31. "OSPEEDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 28.--29. "OSPEEDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 26.--27. "OSPEEDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 24.--25. "OSPEEDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 22.--23. "OSPEEDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 20.--21. "OSPEEDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 18.--19. "OSPEEDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 16.--17. "OSPEEDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 14.--15. "OSPEEDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 12.--13. "OSPEEDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0x8 10.--11. "OSPEEDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 8.--9. "OSPEEDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 6.--7. "OSPEEDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 4.--5. "OSPEEDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 2.--3. "OSPEEDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0x8 0.--1. "OSPEEDR0,Port x configuration bits (y =" "0,1,2,3" line.long 0xC "PUPDR,GPIO port pull-up/pull-down" bitfld.long 0xC 30.--31. "PUPDR15,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 28.--29. "PUPDR14,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 26.--27. "PUPDR13,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 24.--25. "PUPDR12,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 22.--23. "PUPDR11,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 20.--21. "PUPDR10,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 18.--19. "PUPDR9,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 16.--17. "PUPDR8,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 14.--15. "PUPDR7,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 12.--13. "PUPDR6,Port x configuration bits (y =" "0,1,2,3" newline bitfld.long 0xC 10.--11. "PUPDR5,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 8.--9. "PUPDR4,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 6.--7. "PUPDR3,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 4.--5. "PUPDR2,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 2.--3. "PUPDR1,Port x configuration bits (y =" "0,1,2,3" bitfld.long 0xC 0.--1. "PUPDR0,Port x configuration bits (y =" "0,1,2,3" rgroup.long 0x10++0x3 line.long 0x0 "IDR,GPIO port input data register" bitfld.long 0x0 15. "IDR15,Port input data (y =" "0,1" bitfld.long 0x0 14. "IDR14,Port input data (y =" "0,1" bitfld.long 0x0 13. "IDR13,Port input data (y =" "0,1" bitfld.long 0x0 12. "IDR12,Port input data (y =" "0,1" bitfld.long 0x0 11. "IDR11,Port input data (y =" "0,1" bitfld.long 0x0 10. "IDR10,Port input data (y =" "0,1" bitfld.long 0x0 9. "IDR9,Port input data (y =" "0,1" bitfld.long 0x0 8. "IDR8,Port input data (y =" "0,1" bitfld.long 0x0 7. "IDR7,Port input data (y =" "0,1" bitfld.long 0x0 6. "IDR6,Port input data (y =" "0,1" newline bitfld.long 0x0 5. "IDR5,Port input data (y =" "0,1" bitfld.long 0x0 4. "IDR4,Port input data (y =" "0,1" bitfld.long 0x0 3. "IDR3,Port input data (y =" "0,1" bitfld.long 0x0 2. "IDR2,Port input data (y =" "0,1" bitfld.long 0x0 1. "IDR1,Port input data (y =" "0,1" bitfld.long 0x0 0. "IDR0,Port input data (y =" "0,1" group.long 0x14++0x3 line.long 0x0 "ODR,GPIO port output data register" bitfld.long 0x0 15. "ODR15,Port output data (y =" "0,1" bitfld.long 0x0 14. "ODR14,Port output data (y =" "0,1" bitfld.long 0x0 13. "ODR13,Port output data (y =" "0,1" bitfld.long 0x0 12. "ODR12,Port output data (y =" "0,1" bitfld.long 0x0 11. "ODR11,Port output data (y =" "0,1" bitfld.long 0x0 10. "ODR10,Port output data (y =" "0,1" bitfld.long 0x0 9. "ODR9,Port output data (y =" "0,1" bitfld.long 0x0 8. "ODR8,Port output data (y =" "0,1" bitfld.long 0x0 7. "ODR7,Port output data (y =" "0,1" bitfld.long 0x0 6. "ODR6,Port output data (y =" "0,1" newline bitfld.long 0x0 5. "ODR5,Port output data (y =" "0,1" bitfld.long 0x0 4. "ODR4,Port output data (y =" "0,1" bitfld.long 0x0 3. "ODR3,Port output data (y =" "0,1" bitfld.long 0x0 2. "ODR2,Port output data (y =" "0,1" bitfld.long 0x0 1. "ODR1,Port output data (y =" "0,1" bitfld.long 0x0 0. "ODR0,Port output data (y =" "0,1" wgroup.long 0x18++0x3 line.long 0x0 "BSRR,GPIO port bit set/reset" bitfld.long 0x0 31. "BR15,Port x reset bit y (y =" "0,1" bitfld.long 0x0 30. "BR14,Port x reset bit y (y =" "0,1" bitfld.long 0x0 29. "BR13,Port x reset bit y (y =" "0,1" bitfld.long 0x0 28. "BR12,Port x reset bit y (y =" "0,1" bitfld.long 0x0 27. "BR11,Port x reset bit y (y =" "0,1" bitfld.long 0x0 26. "BR10,Port x reset bit y (y =" "0,1" bitfld.long 0x0 25. "BR9,Port x reset bit y (y =" "0,1" bitfld.long 0x0 24. "BR8,Port x reset bit y (y =" "0,1" bitfld.long 0x0 23. "BR7,Port x reset bit y (y =" "0,1" bitfld.long 0x0 22. "BR6,Port x reset bit y (y =" "0,1" newline bitfld.long 0x0 21. "BR5,Port x reset bit y (y =" "0,1" bitfld.long 0x0 20. "BR4,Port x reset bit y (y =" "0,1" bitfld.long 0x0 19. "BR3,Port x reset bit y (y =" "0,1" bitfld.long 0x0 18. "BR2,Port x reset bit y (y =" "0,1" bitfld.long 0x0 17. "BR1,Port x reset bit y (y =" "0,1" bitfld.long 0x0 16. "BR0,Port x set bit y (y=" "0,1" bitfld.long 0x0 15. "BS15,Port x set bit y (y=" "0,1" bitfld.long 0x0 14. "BS14,Port x set bit y (y=" "0,1" bitfld.long 0x0 13. "BS13,Port x set bit y (y=" "0,1" bitfld.long 0x0 12. "BS12,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 11. "BS11,Port x set bit y (y=" "0,1" bitfld.long 0x0 10. "BS10,Port x set bit y (y=" "0,1" bitfld.long 0x0 9. "BS9,Port x set bit y (y=" "0,1" bitfld.long 0x0 8. "BS8,Port x set bit y (y=" "0,1" bitfld.long 0x0 7. "BS7,Port x set bit y (y=" "0,1" bitfld.long 0x0 6. "BS6,Port x set bit y (y=" "0,1" bitfld.long 0x0 5. "BS5,Port x set bit y (y=" "0,1" bitfld.long 0x0 4. "BS4,Port x set bit y (y=" "0,1" bitfld.long 0x0 3. "BS3,Port x set bit y (y=" "0,1" bitfld.long 0x0 2. "BS2,Port x set bit y (y=" "0,1" newline bitfld.long 0x0 1. "BS1,Port x set bit y (y=" "0,1" bitfld.long 0x0 0. "BS0,Port x set bit y (y=" "0,1" group.long 0x1C++0xB line.long 0x0 "LCKR,GPIO port configuration lock" bitfld.long 0x0 16. "LCKK,Port x lock bit y" "0,1" bitfld.long 0x0 15. "LCK15,Port x lock bit y (y=" "0,1" bitfld.long 0x0 14. "LCK14,Port x lock bit y (y=" "0,1" bitfld.long 0x0 13. "LCK13,Port x lock bit y (y=" "0,1" bitfld.long 0x0 12. "LCK12,Port x lock bit y (y=" "0,1" bitfld.long 0x0 11. "LCK11,Port x lock bit y (y=" "0,1" bitfld.long 0x0 10. "LCK10,Port x lock bit y (y=" "0,1" bitfld.long 0x0 9. "LCK9,Port x lock bit y (y=" "0,1" bitfld.long 0x0 8. "LCK8,Port x lock bit y (y=" "0,1" bitfld.long 0x0 7. "LCK7,Port x lock bit y (y=" "0,1" newline bitfld.long 0x0 6. "LCK6,Port x lock bit y (y=" "0,1" bitfld.long 0x0 5. "LCK5,Port x lock bit y (y=" "0,1" bitfld.long 0x0 4. "LCK4,Port x lock bit y (y=" "0,1" bitfld.long 0x0 3. "LCK3,Port x lock bit y (y=" "0,1" bitfld.long 0x0 2. "LCK2,Port x lock bit y (y=" "0,1" bitfld.long 0x0 1. "LCK1,Port x lock bit y (y=" "0,1" bitfld.long 0x0 0. "LCK0,Port x lock bit y (y=" "0,1" line.long 0x4 "AFRL,GPIO alternate function low" hexmask.long.byte 0x4 28.--31. 1. "AFRL7,Alternate function selection for port x" hexmask.long.byte 0x4 24.--27. 1. "AFRL6,Alternate function selection for port x" hexmask.long.byte 0x4 20.--23. 1. "AFRL5,Alternate function selection for port x" hexmask.long.byte 0x4 16.--19. 1. "AFRL4,Alternate function selection for port x" hexmask.long.byte 0x4 12.--15. 1. "AFRL3,Alternate function selection for port x" hexmask.long.byte 0x4 8.--11. 1. "AFRL2,Alternate function selection for port x" hexmask.long.byte 0x4 4.--7. 1. "AFRL1,Alternate function selection for port x" hexmask.long.byte 0x4 0.--3. 1. "AFRL0,Alternate function selection for port x" line.long 0x8 "AFRH,GPIO alternate function high" hexmask.long.byte 0x8 28.--31. 1. "AFRH15,Alternate function selection for port x" hexmask.long.byte 0x8 24.--27. 1. "AFRH14,Alternate function selection for port x" hexmask.long.byte 0x8 20.--23. 1. "AFRH13,Alternate function selection for port x" hexmask.long.byte 0x8 16.--19. 1. "AFRH12,Alternate function selection for port x" hexmask.long.byte 0x8 12.--15. 1. "AFRH11,Alternate function selection for port x" hexmask.long.byte 0x8 8.--11. 1. "AFRH10,Alternate function selection for port x" hexmask.long.byte 0x8 4.--7. 1. "AFRH9,Alternate function selection for port x" hexmask.long.byte 0x8 0.--3. 1. "AFRH8,Alternate function selection for port x" wgroup.long 0x28++0x3 line.long 0x0 "BRR,Port bit reset register" bitfld.long 0x0 15. "BR15,Port x Reset bit y" "0,1" bitfld.long 0x0 14. "BR14,Port x Reset bit y" "0,1" bitfld.long 0x0 13. "BR13,Port x Reset bit y" "0,1" bitfld.long 0x0 12. "BR12,Port x Reset bit y" "0,1" bitfld.long 0x0 11. "BR11,Port x Reset bit y" "0,1" bitfld.long 0x0 10. "BR10,Port x Reset bit y" "0,1" bitfld.long 0x0 9. "BR9,Port x Reset bit y" "0,1" bitfld.long 0x0 8. "BR8,Port x Reset bit y" "0,1" bitfld.long 0x0 7. "BR7,Port x Reset bit y" "0,1" bitfld.long 0x0 6. "BR6,Port x Reset bit y" "0,1" newline bitfld.long 0x0 5. "BR5,Port x Reset bit y" "0,1" bitfld.long 0x0 4. "BR4,Port x Reset bit y" "0,1" bitfld.long 0x0 3. "BR3,Port x Reset bit y" "0,1" bitfld.long 0x0 2. "BR2,Port x Reset bit y" "0,1" bitfld.long 0x0 1. "BR1,Port x Reset bit y" "0,1" bitfld.long 0x0 0. "BR0,Port x Reset bit y" "0,1" tree.end tree.end tree "I2C (Inter-Integrated Circuit)" base ad:0x0 tree "I2C1" base ad:0x40005400 group.long 0x0++0x1B line.long 0x0 "CR1,Control register 1" bitfld.long 0x0 23. "PECEN,PEC enable" "0,1" bitfld.long 0x0 22. "ALERTEN,SMBUS alert enable" "0,1" bitfld.long 0x0 21. "SMBDEN,SMBus Device Default address" "0,1" bitfld.long 0x0 20. "SMBHEN,SMBus Host address enable" "0,1" bitfld.long 0x0 19. "GCEN,General call enable" "0,1" bitfld.long 0x0 18. "WUPEN,Wakeup from STOP enable" "0,1" bitfld.long 0x0 17. "NOSTRETCH,Clock stretching disable" "0,1" bitfld.long 0x0 16. "SBC,Slave byte control" "0,1" bitfld.long 0x0 15. "RXDMAEN,DMA reception requests" "0,1" newline bitfld.long 0x0 14. "TXDMAEN,DMA transmission requests" "0,1" bitfld.long 0x0 13. "SWRST,Software reset" "0,1" bitfld.long 0x0 12. "ANFOFF,Analog noise filter OFF" "0,1" hexmask.long.byte 0x0 8.--11. 1. "DNF,Digital noise filter" bitfld.long 0x0 7. "ERRIE,Error interrupts enable" "0,1" bitfld.long 0x0 6. "TCIE,Transfer Complete interrupt" "0,1" bitfld.long 0x0 5. "STOPIE,STOP detection Interrupt" "0,1" bitfld.long 0x0 4. "NACKIE,Not acknowledge received interrupt" "0,1" bitfld.long 0x0 3. "ADDRIE,Address match interrupt enable (slave" "0,1" newline bitfld.long 0x0 2. "RXIE,RX Interrupt enable" "0,1" bitfld.long 0x0 1. "TXIE,TX Interrupt enable" "0,1" bitfld.long 0x0 0. "PE,Peripheral enable" "0,1" line.long 0x4 "CR2,Control register 2" bitfld.long 0x4 26. "PECBYTE,Packet error checking byte" "0,1" bitfld.long 0x4 25. "AUTOEND,Automatic end mode (master" "0,1" bitfld.long 0x4 24. "RELOAD,NBYTES reload mode" "0,1" hexmask.long.byte 0x4 16.--23. 1. "NBYTES,Number of bytes" bitfld.long 0x4 15. "NACK,NACK generation (slave" "0,1" bitfld.long 0x4 14. "STOP,Stop generation (master" "0,1" bitfld.long 0x4 13. "START,Start generation" "0,1" bitfld.long 0x4 12. "HEAD10R,10-bit address header only read" "0,1" bitfld.long 0x4 11. "ADD10,10-bit addressing mode (master" "0,1" newline bitfld.long 0x4 10. "RD_WRN,Transfer direction (master" "0,1" bitfld.long 0x4 8.--9. "SADD8,Slave address bit 9:8 (master" "0,1,2,3" hexmask.long.byte 0x4 1.--7. 1. "SADD1,Slave address bit 7:1 (master" bitfld.long 0x4 0. "SADD0,Slave address bit 0 (master" "0,1" line.long 0x8 "OAR1,Own address register 1" bitfld.long 0x8 15. "OA1EN,Own Address 1 enable" "0,1" bitfld.long 0x8 10. "OA1MODE,Own Address 1 10-bit mode" "0,1" bitfld.long 0x8 8.--9. "OA1_8,Interface address" "0,1,2,3" hexmask.long.byte 0x8 1.--7. 1. "OA1_1,Interface address" bitfld.long 0x8 0. "OA1_0,Interface address" "0,1" line.long 0xC "OAR2,Own address register 2" bitfld.long 0xC 15. "OA2EN,Own Address 2 enable" "0,1" bitfld.long 0xC 8.--10. "OA2MSK,Own Address 2 masks" "0,1,2,3,4,5,6,7" hexmask.long.byte 0xC 1.--7. 1. "OA2,Interface address" line.long 0x10 "TIMINGR,Timing register" hexmask.long.byte 0x10 28.--31. 1. "PRESC,Timing prescaler" hexmask.long.byte 0x10 20.--23. 1. "SCLDEL,Data setup time" hexmask.long.byte 0x10 16.--19. 1. "SDADEL,Data hold time" hexmask.long.byte 0x10 8.--15. 1. "SCLH,SCL high period (master" hexmask.long.byte 0x10 0.--7. 1. "SCLL,SCL low period (master" line.long 0x14 "TIMEOUTR,Status register 1" bitfld.long 0x14 31. "TEXTEN,Extended clock timeout" "0,1" hexmask.long.word 0x14 16.--27. 1. "TIMEOUTB,Bus timeout B" bitfld.long 0x14 15. "TIMOUTEN,Clock timeout enable" "0,1" bitfld.long 0x14 12. "TIDLE,Idle clock timeout" "0,1" hexmask.long.word 0x14 0.--11. 1. "TIMEOUTA,Bus timeout A" line.long 0x18 "ISR,Interrupt and Status register" hexmask.long.byte 0x18 17.--23. 1. "ADDCODE,Address match code (Slave" rbitfld.long 0x18 16. "DIR,Transfer direction (Slave" "0,1" rbitfld.long 0x18 15. "BUSY,Bus busy" "0,1" rbitfld.long 0x18 13. "ALERT,SMBus alert" "0,1" rbitfld.long 0x18 12. "TIMEOUT,Timeout or t_low detection" "0,1" rbitfld.long 0x18 11. "PECERR,PEC Error in reception" "0,1" rbitfld.long 0x18 10. "OVR,Overrun/Underrun (slave" "0,1" rbitfld.long 0x18 9. "ARLO,Arbitration lost" "0,1" rbitfld.long 0x18 8. "BERR,Bus error" "0,1" newline rbitfld.long 0x18 7. "TCR,Transfer Complete Reload" "0,1" rbitfld.long 0x18 6. "TC,Transfer Complete (master" "0,1" rbitfld.long 0x18 5. "STOPF,Stop detection flag" "0,1" rbitfld.long 0x18 4. "NACKF,Not acknowledge received" "0,1" rbitfld.long 0x18 3. "ADDR,Address matched (slave" "0,1" rbitfld.long 0x18 2. "RXNE,Receive data register not empty" "0,1" bitfld.long 0x18 1. "TXIS,Transmit interrupt status" "0,1" bitfld.long 0x18 0. "TXE,Transmit data register empty" "0,1" wgroup.long 0x1C++0x3 line.long 0x0 "ICR,Interrupt clear register" bitfld.long 0x0 13. "ALERTCF,Alert flag clear" "0,1" bitfld.long 0x0 12. "TIMOUTCF,Timeout detection flag" "0,1" bitfld.long 0x0 11. "PECCF,PEC Error flag clear" "0,1" bitfld.long 0x0 10. "OVRCF,Overrun/Underrun flag" "0,1" bitfld.long 0x0 9. "ARLOCF,Arbitration lost flag" "0,1" bitfld.long 0x0 8. "BERRCF,Bus error flag clear" "0,1" bitfld.long 0x0 5. "STOPCF,Stop detection flag clear" "0,1" bitfld.long 0x0 4. "NACKCF,Not Acknowledge flag clear" "0,1" bitfld.long 0x0 3. "ADDRCF,Address Matched flag clear" "0,1" rgroup.long 0x20++0x7 line.long 0x0 "PECR,PEC register" hexmask.long.byte 0x0 0.--7. 1. "PEC,Packet error checking" line.long 0x4 "RXDR,Receive data register" hexmask.long.byte 0x4 0.--7. 1. "RXDATA,8-bit receive data" group.long 0x28++0x3 line.long 0x0 "TXDR,Transmit data register" hexmask.long.byte 0x0 0.--7. 1. "TXDATA,8-bit transmit data" tree.end tree "I2C2" base ad:0x40005800 group.long 0x0++0x1B line.long 0x0 "CR1,Control register 1" bitfld.long 0x0 23. "PECEN,PEC enable" "0,1" bitfld.long 0x0 22. "ALERTEN,SMBUS alert enable" "0,1" bitfld.long 0x0 21. "SMBDEN,SMBus Device Default address" "0,1" bitfld.long 0x0 20. "SMBHEN,SMBus Host address enable" "0,1" bitfld.long 0x0 19. "GCEN,General call enable" "0,1" bitfld.long 0x0 18. "WUPEN,Wakeup from STOP enable" "0,1" bitfld.long 0x0 17. "NOSTRETCH,Clock stretching disable" "0,1" bitfld.long 0x0 16. "SBC,Slave byte control" "0,1" bitfld.long 0x0 15. "RXDMAEN,DMA reception requests" "0,1" newline bitfld.long 0x0 14. "TXDMAEN,DMA transmission requests" "0,1" bitfld.long 0x0 13. "SWRST,Software reset" "0,1" bitfld.long 0x0 12. "ANFOFF,Analog noise filter OFF" "0,1" hexmask.long.byte 0x0 8.--11. 1. "DNF,Digital noise filter" bitfld.long 0x0 7. "ERRIE,Error interrupts enable" "0,1" bitfld.long 0x0 6. "TCIE,Transfer Complete interrupt" "0,1" bitfld.long 0x0 5. "STOPIE,STOP detection Interrupt" "0,1" bitfld.long 0x0 4. "NACKIE,Not acknowledge received interrupt" "0,1" bitfld.long 0x0 3. "ADDRIE,Address match interrupt enable (slave" "0,1" newline bitfld.long 0x0 2. "RXIE,RX Interrupt enable" "0,1" bitfld.long 0x0 1. "TXIE,TX Interrupt enable" "0,1" bitfld.long 0x0 0. "PE,Peripheral enable" "0,1" line.long 0x4 "CR2,Control register 2" bitfld.long 0x4 26. "PECBYTE,Packet error checking byte" "0,1" bitfld.long 0x4 25. "AUTOEND,Automatic end mode (master" "0,1" bitfld.long 0x4 24. "RELOAD,NBYTES reload mode" "0,1" hexmask.long.byte 0x4 16.--23. 1. "NBYTES,Number of bytes" bitfld.long 0x4 15. "NACK,NACK generation (slave" "0,1" bitfld.long 0x4 14. "STOP,Stop generation (master" "0,1" bitfld.long 0x4 13. "START,Start generation" "0,1" bitfld.long 0x4 12. "HEAD10R,10-bit address header only read" "0,1" bitfld.long 0x4 11. "ADD10,10-bit addressing mode (master" "0,1" newline bitfld.long 0x4 10. "RD_WRN,Transfer direction (master" "0,1" bitfld.long 0x4 8.--9. "SADD8,Slave address bit 9:8 (master" "0,1,2,3" hexmask.long.byte 0x4 1.--7. 1. "SADD1,Slave address bit 7:1 (master" bitfld.long 0x4 0. "SADD0,Slave address bit 0 (master" "0,1" line.long 0x8 "OAR1,Own address register 1" bitfld.long 0x8 15. "OA1EN,Own Address 1 enable" "0,1" bitfld.long 0x8 10. "OA1MODE,Own Address 1 10-bit mode" "0,1" bitfld.long 0x8 8.--9. "OA1_8,Interface address" "0,1,2,3" hexmask.long.byte 0x8 1.--7. 1. "OA1_1,Interface address" bitfld.long 0x8 0. "OA1_0,Interface address" "0,1" line.long 0xC "OAR2,Own address register 2" bitfld.long 0xC 15. "OA2EN,Own Address 2 enable" "0,1" bitfld.long 0xC 8.--10. "OA2MSK,Own Address 2 masks" "0,1,2,3,4,5,6,7" hexmask.long.byte 0xC 1.--7. 1. "OA2,Interface address" line.long 0x10 "TIMINGR,Timing register" hexmask.long.byte 0x10 28.--31. 1. "PRESC,Timing prescaler" hexmask.long.byte 0x10 20.--23. 1. "SCLDEL,Data setup time" hexmask.long.byte 0x10 16.--19. 1. "SDADEL,Data hold time" hexmask.long.byte 0x10 8.--15. 1. "SCLH,SCL high period (master" hexmask.long.byte 0x10 0.--7. 1. "SCLL,SCL low period (master" line.long 0x14 "TIMEOUTR,Status register 1" bitfld.long 0x14 31. "TEXTEN,Extended clock timeout" "0,1" hexmask.long.word 0x14 16.--27. 1. "TIMEOUTB,Bus timeout B" bitfld.long 0x14 15. "TIMOUTEN,Clock timeout enable" "0,1" bitfld.long 0x14 12. "TIDLE,Idle clock timeout" "0,1" hexmask.long.word 0x14 0.--11. 1. "TIMEOUTA,Bus timeout A" line.long 0x18 "ISR,Interrupt and Status register" hexmask.long.byte 0x18 17.--23. 1. "ADDCODE,Address match code (Slave" rbitfld.long 0x18 16. "DIR,Transfer direction (Slave" "0,1" rbitfld.long 0x18 15. "BUSY,Bus busy" "0,1" rbitfld.long 0x18 13. "ALERT,SMBus alert" "0,1" rbitfld.long 0x18 12. "TIMEOUT,Timeout or t_low detection" "0,1" rbitfld.long 0x18 11. "PECERR,PEC Error in reception" "0,1" rbitfld.long 0x18 10. "OVR,Overrun/Underrun (slave" "0,1" rbitfld.long 0x18 9. "ARLO,Arbitration lost" "0,1" rbitfld.long 0x18 8. "BERR,Bus error" "0,1" newline rbitfld.long 0x18 7. "TCR,Transfer Complete Reload" "0,1" rbitfld.long 0x18 6. "TC,Transfer Complete (master" "0,1" rbitfld.long 0x18 5. "STOPF,Stop detection flag" "0,1" rbitfld.long 0x18 4. "NACKF,Not acknowledge received" "0,1" rbitfld.long 0x18 3. "ADDR,Address matched (slave" "0,1" rbitfld.long 0x18 2. "RXNE,Receive data register not empty" "0,1" bitfld.long 0x18 1. "TXIS,Transmit interrupt status" "0,1" bitfld.long 0x18 0. "TXE,Transmit data register empty" "0,1" wgroup.long 0x1C++0x3 line.long 0x0 "ICR,Interrupt clear register" bitfld.long 0x0 13. "ALERTCF,Alert flag clear" "0,1" bitfld.long 0x0 12. "TIMOUTCF,Timeout detection flag" "0,1" bitfld.long 0x0 11. "PECCF,PEC Error flag clear" "0,1" bitfld.long 0x0 10. "OVRCF,Overrun/Underrun flag" "0,1" bitfld.long 0x0 9. "ARLOCF,Arbitration lost flag" "0,1" bitfld.long 0x0 8. "BERRCF,Bus error flag clear" "0,1" bitfld.long 0x0 5. "STOPCF,Stop detection flag clear" "0,1" bitfld.long 0x0 4. "NACKCF,Not Acknowledge flag clear" "0,1" bitfld.long 0x0 3. "ADDRCF,Address Matched flag clear" "0,1" rgroup.long 0x20++0x7 line.long 0x0 "PECR,PEC register" hexmask.long.byte 0x0 0.--7. 1. "PEC,Packet error checking" line.long 0x4 "RXDR,Receive data register" hexmask.long.byte 0x4 0.--7. 1. "RXDATA,8-bit receive data" group.long 0x28++0x3 line.long 0x0 "TXDR,Transmit data register" hexmask.long.byte 0x0 0.--7. 1. "TXDATA,8-bit transmit data" tree.end tree.end tree "IWDG (Independent Watchdog)" base ad:0x40003000 wgroup.long 0x0++0x3 line.long 0x0 "KR,Key register" hexmask.long.word 0x0 0.--15. 1. "KEY,Key value" group.long 0x4++0x7 line.long 0x0 "PR,Prescaler register" bitfld.long 0x0 0.--2. "PR,Prescaler divider" "0,1,2,3,4,5,6,7" line.long 0x4 "RLR,Reload register" hexmask.long.word 0x4 0.--11. 1. "RL,Watchdog counter reload" rgroup.long 0xC++0x3 line.long 0x0 "SR,Status register" bitfld.long 0x0 2. "WVU,Watchdog counter window value" "0,1" bitfld.long 0x0 1. "RVU,Watchdog counter reload value" "0,1" bitfld.long 0x0 0. "PVU,Watchdog prescaler value" "0,1" group.long 0x10++0x3 line.long 0x0 "WINR,Window register" hexmask.long.word 0x0 0.--11. 1. "WIN,Watchdog counter window" tree.end sif (cpuis("FT32F0??*")) tree "LEB (Leading Edge Blanking and Filter)" base ad:0x4000FC00 group.long 0x0++0x27 line.long 0x0 "LEBCR,LEBCR Register" hexmask.long.byte 0x0 16.--20. 1. "LEB3MSK,LEB3MSK Identifier" hexmask.long.byte 0x0 8.--12. 1. "LEB2MSK,LEB2MSK Identifier" hexmask.long.byte 0x0 0.--4. 1. "LEB1MSK,LEB1MSK Identifier" line.long 0x4 "FLTCFG1,FLTCFG1 Register" bitfld.long 0x4 27. "C1OUTSEL,C1OUTSEL Identifier" "0,1" bitfld.long 0x4 26. "C1OUTM,C1OUTM Identifier" "0,1" hexmask.long.byte 0x4 22.--25. 1. "C1FLTSMP,C1FLTSMP Identifier" hexmask.long.byte 0x4 18.--21. 1. "C1FLTPS,C1FLTPS Identifier" bitfld.long 0x4 17. "C1FLTSW,C1FLTSW Identifier" "0,1" bitfld.long 0x4 16. "C1FLTEN,C1FLTEN Identifier" "0,1" bitfld.long 0x4 12.--13. "IOSEL,IOSEL Identifier" "0,1,2,3" hexmask.long.byte 0x4 6.--9. 1. "IOFLTSMP,IOFLTSMP Identifier" hexmask.long.byte 0x4 2.--5. 1. "IOFLTPS,IOFLTPS Identifier" newline bitfld.long 0x4 1. "IOFLTSW,IOFLTSW Identifier" "0,1" bitfld.long 0x4 0. "IOFLTEN,IOFLTEN Identifier" "0,1" line.long 0x8 "FLTCFG2,FLTCFG2 Register" bitfld.long 0x8 27. "C3OUTSEL,C3OUTSEL Identifier" "0,1" bitfld.long 0x8 26. "C3OUTM,C3OUTM Identifier" "0,1" hexmask.long.byte 0x8 22.--25. 1. "C3FLTSMP,C3FLTSMP Identifier" hexmask.long.byte 0x8 18.--21. 1. "C3FLTPS,C3FLTPS Identifier" bitfld.long 0x8 17. "C3FLTSW,C3FLTSW Identifier" "0,1" bitfld.long 0x8 16. "C3FLTEN,C3FLTEN Identifier" "0,1" bitfld.long 0x8 11. "C2OUTSEL,C2OUTSEL Identifier" "0,1" bitfld.long 0x8 10. "C2OUTM,C2OUTM Identifier" "0,1" hexmask.long.byte 0x8 6.--9. 1. "C2FLTSMP,C2FLTSMP Identifier" newline hexmask.long.byte 0x8 2.--5. 1. "C2FLTPS,C2FLTPS Identifier" bitfld.long 0x8 1. "C2FLTSW,C2FLTSW Identifier" "0,1" bitfld.long 0x8 0. "C2FLTEN,C2FLTEN Identifier" "0,1" line.long 0xC "LEBCFG,LEBCFG Register" bitfld.long 0xC 24. "IO_LEBLEN,IO_LEBLEN Identifier" "0,1" bitfld.long 0xC 16. "IO_LEBHEN,IO_LEBHEN Identifier" "0,1" bitfld.long 0xC 8. "IO_LEBFTEN,IO_LEBFTEN Identifier" "0,1" bitfld.long 0xC 0. "IO_LEBRTEN,IO_LEBRTEN Identifier" "0,1" line.long 0x10 "LEB1CFG,LEB1CFG Register" hexmask.long.byte 0x10 24.--30. 1. "LEB1LEN,LEB1LEN Identifier" hexmask.long.byte 0x10 16.--22. 1. "LEB1HEN,LEB1HEN Identifier" hexmask.long.byte 0x10 8.--14. 1. "LEB1FTEN,LEB1FTEN Identifier" hexmask.long.byte 0x10 0.--6. 1. "LEB1RTEN,LEB1RTEN Identifier" line.long 0x14 "LEB2CFG,LEB2CFG Register" hexmask.long.byte 0x14 24.--27. 1. "LEB2LEN,LEB2LEN Identifier" hexmask.long.byte 0x14 16.--19. 1. "LEB2HEN,LEB2HEN Identifier" hexmask.long.byte 0x14 8.--11. 1. "LEB2FTEN,LEB2FTEN Identifier" hexmask.long.byte 0x14 0.--3. 1. "LEB2RTEN,LEB2RTEN Identifier" line.long 0x18 "LEB3CFG,LEB3CFG Register" bitfld.long 0x18 24.--26. "LEB3LEN,LEB3LEN Identifier" "0,1,2,3,4,5,6,7" bitfld.long 0x18 16.--18. "LEB3HEN,LEB3HEN Identifier" "0,1,2,3,4,5,6,7" bitfld.long 0x18 8.--10. "LEB3FTEN,LEB3FTEN Identifier" "0,1,2,3,4,5,6,7" bitfld.long 0x18 0.--2. "LEB3RTEN,LEB3RTEN Identifier" "0,1,2,3,4,5,6,7" line.long 0x1C "LEB1PR,LEB1PR Register" hexmask.long.word 0x1C 0.--9. 1. "LEB1PR,LEB1PR Identifier" line.long 0x20 "LEB2PR,LEB2PR Register" hexmask.long.word 0x20 0.--9. 1. "LEB2PR,LEB2PR Identifier" line.long 0x24 "LEB3PR,LEB3PR Register" hexmask.long.word 0x24 0.--9. 1. "LEB3PR,LEB3PR Identifier" tree.end endif tree "NVIC (Nested Vector Interrupt Controller)" base ad:0xE000E100 group.long 0x0++0x3 line.long 0x0 "ISER,Interrupt Set Enable Register" hexmask.long 0x0 0.--31. 1. "SETENA,SETENA" group.long 0x80++0x3 line.long 0x0 "ICER,Interrupt Clear Enable" hexmask.long 0x0 0.--31. 1. "CLRENA,CLRENA" group.long 0x100++0x3 line.long 0x0 "ISPR,Interrupt Set-Pending Register" hexmask.long 0x0 0.--31. 1. "SETPEND,SETPEND" group.long 0x180++0x3 line.long 0x0 "ICPR,Interrupt Clear-Pending" hexmask.long 0x0 0.--31. 1. "CLRPEND,CLRPEND" group.long 0x300++0x1F line.long 0x0 "IPR0,Interrupt Priority Register 0" bitfld.long 0x0 30.--31. "PRI_03,PRI_03" "0,1,2,3" bitfld.long 0x0 22.--23. "PRI_02,PRI_02" "0,1,2,3" bitfld.long 0x0 14.--15. "PRI_01,PRI_01" "0,1,2,3" bitfld.long 0x0 6.--7. "PRI_00,PRI_00" "0,1,2,3" line.long 0x4 "IPR1,Interrupt Priority Register 1" bitfld.long 0x4 30.--31. "PRI_43,PRI_43" "0,1,2,3" bitfld.long 0x4 22.--23. "PRI_42,PRI_42" "0,1,2,3" bitfld.long 0x4 14.--15. "PRI_41,PRI_41" "0,1,2,3" bitfld.long 0x4 6.--7. "PRI_40,PRI_40" "0,1,2,3" line.long 0x8 "IPR2,Interrupt Priority Register 2" bitfld.long 0x8 30.--31. "PRI_83,PRI_83" "0,1,2,3" bitfld.long 0x8 22.--23. "PRI_82,PRI_82" "0,1,2,3" bitfld.long 0x8 14.--15. "PRI_81,PRI_81" "0,1,2,3" bitfld.long 0x8 6.--7. "PRI_80,PRI_80" "0,1,2,3" line.long 0xC "IPR3,Interrupt Priority Register 3" bitfld.long 0xC 30.--31. "PRI_123,PRI_123" "0,1,2,3" bitfld.long 0xC 22.--23. "PRI_122,PRI_122" "0,1,2,3" bitfld.long 0xC 14.--15. "PRI_121,PRI_121" "0,1,2,3" bitfld.long 0xC 6.--7. "PRI_120,PRI_120" "0,1,2,3" line.long 0x10 "IPR4,Interrupt Priority Register 4" bitfld.long 0x10 30.--31. "PRI_163,PRI_163" "0,1,2,3" bitfld.long 0x10 22.--23. "PRI_162,PRI_162" "0,1,2,3" bitfld.long 0x10 14.--15. "PRI_161,PRI_161" "0,1,2,3" bitfld.long 0x10 6.--7. "PRI_160,PRI_160" "0,1,2,3" line.long 0x14 "IPR5,Interrupt Priority Register 5" bitfld.long 0x14 30.--31. "PRI_203,PRI_203" "0,1,2,3" bitfld.long 0x14 22.--23. "PRI_202,PRI_202" "0,1,2,3" bitfld.long 0x14 14.--15. "PRI_201,PRI_201" "0,1,2,3" bitfld.long 0x14 6.--7. "PRI_200,PRI_200" "0,1,2,3" line.long 0x18 "IPR6,Interrupt Priority Register 6" bitfld.long 0x18 30.--31. "PRI_243,PRI_243" "0,1,2,3" bitfld.long 0x18 22.--23. "PRI_242,PRI_242" "0,1,2,3" bitfld.long 0x18 14.--15. "PRI_241,PRI_241" "0,1,2,3" bitfld.long 0x18 6.--7. "PRI_240,PRI_240" "0,1,2,3" line.long 0x1C "IPR7,Interrupt Priority Register 7" bitfld.long 0x1C 30.--31. "PRI_283,PRI_283" "0,1,2,3" bitfld.long 0x1C 22.--23. "PRI_282,PRI_282" "0,1,2,3" bitfld.long 0x1C 14.--15. "PRI_281,PRI_281" "0,1,2,3" bitfld.long 0x1C 6.--7. "PRI_280,PRI_280" "0,1,2,3" tree.end sif (cpuis("FT32F0??*")) tree "OP (Operational Aplifier)" base ad:0x40010030 group.long 0x0++0x3 line.long 0x0 "CR,CR Register" bitfld.long 0x0 16. "OP0OUT,Revision Identifier" "0,1" bitfld.long 0x0 15. "OP0PSEL,Revision Identifier" "0,1" bitfld.long 0x0 13.--14. "OP0NSEL,Revision Identifier" "0,1,2,3" bitfld.long 0x0 10.--12. "OP0FR,Revision Identifier" "0,1,2,3,4,5,6,7" bitfld.long 0x0 9. "OP0FCAPE,Revision Identifier" "0,1" bitfld.long 0x0 8. "OP0TM,Revision Identifier" "0,1" bitfld.long 0x0 7. "OPTODIG,Revision Identifier" "0,1" bitfld.long 0x0 6. "OPTOIO,Revision Identifier" "0,1" hexmask.long.byte 0x0 1.--5. 1. "OP0COF,Division Identifier" bitfld.long 0x0 0. "OP0ON,Device Identifier" "0,1" group.long 0x10++0x3 line.long 0x0 "CR2,CR2 Register" bitfld.long 0x0 17. "OP2PRMAP,Revision Identifier" "0,1" bitfld.long 0x0 16. "OP2OUT,Revision Identifier" "0,1" bitfld.long 0x0 15. "OP2PSEL,Revision Identifier" "0,1" bitfld.long 0x0 13.--14. "OP2NSEL,Revision Identifier" "0,1,2,3" bitfld.long 0x0 10.--12. "OP2FR,Revision Identifier" "0,1,2,3,4,5,6,7" bitfld.long 0x0 9. "OP2FCAPE,Revision Identifier" "0,1" bitfld.long 0x0 8. "OP2TM,Revision Identifier" "0,1" bitfld.long 0x0 7. "OP2TODIG,Revision Identifier" "0,1" bitfld.long 0x0 6. "OP2TOIO,Revision Identifier" "0,1" hexmask.long.byte 0x0 1.--5. 1. "OP2COF,Division Identifier" bitfld.long 0x0 0. "OP2ON,Device Identifier" "0,1" tree.end endif tree "PWR (Power Control)" base ad:0x40007000 group.long 0x0++0x7 line.long 0x0 "CR,power control register" sif (cpuis("FT32F0??*")) bitfld.long 0x0 9. "PLS[3],PVD level selection[3]" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 9. "FPDS,Flash power down in Stop" "0,1" endif bitfld.long 0x0 8. "DBP,Disable backup domain write" "0,1" bitfld.long 0x0 5.--7. "PLS,PVD level selection" "0,1,2,3,4,5,6,7" bitfld.long 0x0 4. "PVDE,Power voltage detector" "0,1" bitfld.long 0x0 3. "CSBF,Clear standby flag" "0,1" bitfld.long 0x0 2. "CWUF,Clear wakeup flag" "0,1" bitfld.long 0x0 1. "PDDS,Power down deepsleep" "0,1" bitfld.long 0x0 0. "LPDS,Low-power deep sleep" "0,1" line.long 0x4 "CSR,power control/status register" sif (cpuis("FT32F0??*")) bitfld.long 0x4 9. "EWUP2,Enable WKUP pin" "0,1" bitfld.long 0x4 8. "EWUP1,Enable WKUP pin" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x4 9. "BRE,Backup regulator enable" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x4 8. "EWUP,Enable WKUP pin" "0,1" endif sif (cpuis("FT32F072?*")) rbitfld.long 0x4 3. "BRR,Backup regulator ready" "0,1" endif rbitfld.long 0x4 2. "PVDO,PVD output" "0,1" rbitfld.long 0x4 1. "SBF,Standby flag" "0,1" rbitfld.long 0x4 0. "WUF,Wakeup flag" "0,1" tree.end tree "RCC (Reset and Clock Control)" base ad:0x40021000 group.long 0x0++0x37 line.long 0x0 "CR,Clock control register" rbitfld.long 0x0 25. "PLLRDY,PLL clock ready flag" "0,1" bitfld.long 0x0 24. "PLLON,PLL enable" "0,1" bitfld.long 0x0 19. "CSSON,Clock Security System" "0,1" bitfld.long 0x0 18. "HSEBYP,External High Speed clock" "0,1" rbitfld.long 0x0 17. "HSERDY,External High Speed clock ready" "0,1" bitfld.long 0x0 16. "HSEON,External High Speed clock" "0,1" hexmask.long.byte 0x0 8.--15. 1. "HSICAL,Internal High Speed clock" hexmask.long.byte 0x0 3.--7. 1. "HSITRIM,Internal High Speed clock" rbitfld.long 0x0 1. "HSIRDY,Internal High Speed clock ready" "0,1" newline bitfld.long 0x0 0. "HSION,Internal High Speed clock" "0,1" line.long 0x4 "CFGR,Clock configuration register" bitfld.long 0x4 31. "PLLNODIV,PLL clock not divided for" "0,1" bitfld.long 0x4 28.--30. "MCOPRE,Microcontroller Clock Output" "0,1,2,3,4,5,6,7" bitfld.long 0x4 24.--26. "MCO,Microcontroller clock" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x4 18.--21. 1. "PLLMUL,PLL Multiplication Factor" bitfld.long 0x4 17. "PLLXTPRE,HSE divider for PLL entry" "0,1" bitfld.long 0x4 15.--16. "PLLSRC,PLL input clock source" "0,1,2,3" bitfld.long 0x4 14. "ADCPRE,ADC prescaler" "0,1" bitfld.long 0x4 8.--10. "PPRE,APB Low speed prescaler" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x4 4.--7. 1. "HPRE,AHB prescaler" newline rbitfld.long 0x4 2.--3. "SWS,System Clock Switch Status" "0,1,2,3" bitfld.long 0x4 0.--1. "SW,System clock Switch" "0,1,2,3" line.long 0x8 "CIR,Clock interrupt register" bitfld.long 0x8 23. "CSSC,Clock security system interrupt" "0,1" bitfld.long 0x8 22. "HSI48RDYC,HSI48 Ready Interrupt" "0,1" bitfld.long 0x8 21. "HSI14RDYC,HSI 14 MHz Ready Interrupt" "0,1" bitfld.long 0x8 20. "PLLRDYC,PLL Ready Interrupt Clear" "0,1" bitfld.long 0x8 19. "HSERDYC,HSE Ready Interrupt Clear" "0,1" bitfld.long 0x8 18. "HSIRDYC,HSI Ready Interrupt Clear" "0,1" bitfld.long 0x8 17. "LSERDYC,LSE Ready Interrupt Clear" "0,1" bitfld.long 0x8 16. "LSIRDYC,LSI Ready Interrupt Clear" "0,1" bitfld.long 0x8 14. "HSI48RDYIE,HSI48 ready interrupt" "0,1" newline bitfld.long 0x8 13. "HSI14RDYE,HSI14 ready interrupt" "0,1" bitfld.long 0x8 12. "PLLRDYIE,PLL Ready Interrupt Enable" "0,1" bitfld.long 0x8 11. "HSERDYIE,HSE Ready Interrupt Enable" "0,1" bitfld.long 0x8 10. "HSIRDYIE,HSI Ready Interrupt Enable" "0,1" bitfld.long 0x8 9. "LSERDYIE,LSE Ready Interrupt Enable" "0,1" bitfld.long 0x8 8. "LSIRDYIE,LSI Ready Interrupt Enable" "0,1" rbitfld.long 0x8 7. "CSSF,Clock Security System Interrupt" "0,1" rbitfld.long 0x8 6. "HSI48RDYF,HSI48 ready interrupt flag" "0,1" rbitfld.long 0x8 5. "HSI14RDYF,HSI14 ready interrupt flag" "0,1" newline rbitfld.long 0x8 4. "PLLRDYF,PLL Ready Interrupt flag" "0,1" rbitfld.long 0x8 3. "HSERDYF,HSE Ready Interrupt flag" "0,1" rbitfld.long 0x8 2. "HSIRDYF,HSI Ready Interrupt flag" "0,1" rbitfld.long 0x8 1. "LSERDYF,LSE Ready Interrupt flag" "0,1" rbitfld.long 0x8 0. "LSIRDYF,LSI Ready Interrupt flag" "0,1" line.long 0xC "APB2RSTR,APB2 peripheral reset register" bitfld.long 0xC 22. "DBGMCURST,Debug MCU reset" "0,1" bitfld.long 0xC 18. "TIM17RST,TIM17 timer reset" "0,1" bitfld.long 0xC 17. "TIM16RST,TIM16 timer reset" "0,1" bitfld.long 0xC 16. "TIM15RST,TIM15 timer reset" "0,1" bitfld.long 0xC 14. "USART1RST,USART1 reset" "0,1" bitfld.long 0xC 12. "SPI1RST,SPI 1 reset" "0,1" bitfld.long 0xC 11. "TIM1RST,TIM1 timer reset" "0,1" bitfld.long 0xC 9. "ADCRST,ADC interface reset" "0,1" bitfld.long 0xC 0. "SYSCFGRST,SYSCFG and COMP reset" "0,1" line.long 0x10 "APB1RSTR,APB1 peripheral reset register" sif (cpuis("FT32F0??*")) bitfld.long 0x10 31. "LEBRST,LEB interface reset" "0,1" endif bitfld.long 0x10 30. "CECRST,HDMI CEC reset" "0,1" bitfld.long 0x10 29. "DACRST,DAC interface reset" "0,1" bitfld.long 0x10 28. "PWRRST,Power interface reset" "0,1" bitfld.long 0x10 27. "CRSRST,Clock Recovery System interface" "0,1" bitfld.long 0x10 25. "CANRST,CAN interface reset" "0,1" bitfld.long 0x10 23. "USBRST,USB interface reset" "0,1" bitfld.long 0x10 22. "I2C2RST,I2C2 reset" "0,1" bitfld.long 0x10 21. "I2C1RST,I2C1 reset" "0,1" newline bitfld.long 0x10 19. "USART4RST,USART4 reset" "0,1" bitfld.long 0x10 18. "USART3RST,USART3 reset" "0,1" bitfld.long 0x10 17. "USART2RST,USART 2 reset" "0,1" bitfld.long 0x10 14. "SPI2RST,SPI2 reset" "0,1" bitfld.long 0x10 11. "WWDGRST,Window watchdog reset" "0,1" bitfld.long 0x10 8. "TIM14RST,Timer 14 reset" "0,1" bitfld.long 0x10 5. "TIM7RST,TIM7 timer reset" "0,1" bitfld.long 0x10 4. "TIM6RST,Timer 6 reset" "0,1" bitfld.long 0x10 1. "TIM3RST,Timer 3 reset" "0,1" newline bitfld.long 0x10 0. "TIM2RST,Timer 2 reset" "0,1" line.long 0x14 "AHBENR,AHB Peripheral Clock enable register" bitfld.long 0x14 24. "TSCEN,Touch sensing controller clock" "0,1" bitfld.long 0x14 22. "IOPFEN,I/O port F clock enable" "0,1" bitfld.long 0x14 20. "IOPDEN,I/O port D clock enable" "0,1" bitfld.long 0x14 19. "IOPCEN,I/O port C clock enable" "0,1" bitfld.long 0x14 18. "IOPBEN,I/O port B clock enable" "0,1" bitfld.long 0x14 17. "IOPAEN,I/O port A clock enable" "0,1" bitfld.long 0x14 6. "CRCEN,CRC clock enable" "0,1" bitfld.long 0x14 4. "FLITFEN,FLITF clock enable" "0,1" bitfld.long 0x14 2. "SRAMEN,SRAM interface clock" "0,1" newline bitfld.long 0x14 0. "DMAEN,DMA1 clock enable" "0,1" line.long 0x18 "APB2ENR,APB2 peripheral clock enable register" bitfld.long 0x18 22. "DBGMCUEN,MCU debug module clock" "0,1" bitfld.long 0x18 18. "TIM17EN,TIM17 timer clock enable" "0,1" bitfld.long 0x18 17. "TIM16EN,TIM16 timer clock enable" "0,1" bitfld.long 0x18 16. "TIM15EN,TIM15 timer clock enable" "0,1" bitfld.long 0x18 14. "USART1EN,USART1 clock enable" "0,1" bitfld.long 0x18 12. "SPI1EN,SPI 1 clock enable" "0,1" bitfld.long 0x18 11. "TIM1EN,TIM1 Timer clock enable" "0,1" bitfld.long 0x18 9. "ADCEN,ADC 1 interface clock" "0,1" bitfld.long 0x18 0. "SYSCFGEN,SYSCFG clock enable" "0,1" line.long 0x1C "APB1ENR,APB1 peripheral clock enable register" sif (cpuis("FT32F0??*")) bitfld.long 0x1C 31. "LEBEN,LEB interface clock" "0,1" bitfld.long 0x1C 23. "USBEN,USB interface clock enable" "0,1" endif bitfld.long 0x1C 30. "CECEN,HDMI CEC interface clock" "0,1" bitfld.long 0x1C 29. "DACEN,DAC interface clock enable" "0,1" bitfld.long 0x1C 28. "PWREN,Power interface clock" "0,1" bitfld.long 0x1C 27. "CRSEN,Clock Recovery System interface clock" "0,1" bitfld.long 0x1C 25. "CANEN,CAN interface clock enable" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x1C 23. "USBRST,USB interface clock enable" "0,1" endif bitfld.long 0x1C 22. "I2C2EN,I2C 2 clock enable" "0,1" newline bitfld.long 0x1C 21. "I2C1EN,I2C 1 clock enable" "0,1" bitfld.long 0x1C 19. "USART4EN,USART4 clock enable" "0,1" bitfld.long 0x1C 18. "USART3EN,USART3 clock enable" "0,1" bitfld.long 0x1C 17. "USART2EN,USART 2 clock enable" "0,1" bitfld.long 0x1C 14. "SPI2EN,SPI 2 clock enable" "0,1" bitfld.long 0x1C 11. "WWDGEN,Window watchdog clock" "0,1" bitfld.long 0x1C 8. "TIM14EN,Timer 14 clock enable" "0,1" bitfld.long 0x1C 5. "TIM7EN,TIM7 timer clock enable" "0,1" bitfld.long 0x1C 4. "TIM6EN,Timer 6 clock enable" "0,1" newline bitfld.long 0x1C 1. "TIM3EN,Timer 3 clock enable" "0,1" bitfld.long 0x1C 0. "TIM2EN,Timer 2 clock enable" "0,1" line.long 0x20 "BDCR,Backup domain control register" bitfld.long 0x20 16. "BDRST,Backup domain software" "0,1" bitfld.long 0x20 15. "RTCEN,RTC clock enable" "0,1" bitfld.long 0x20 8.--9. "RTCSEL,RTC clock source selection" "0,1,2,3" bitfld.long 0x20 3.--4. "LSEDRV,LSE oscillator drive" "0,1,2,3" bitfld.long 0x20 2. "LSEBYP,External Low Speed oscillator" "0,1" rbitfld.long 0x20 1. "LSERDY,External Low Speed oscillator" "0,1" bitfld.long 0x20 0. "LSEON,External Low Speed oscillator" "0,1" line.long 0x24 "CSR,Control/status register" bitfld.long 0x24 31. "LPWRRSTF,Low-power reset flag" "0,1" bitfld.long 0x24 30. "WWDGRSTF,Window watchdog reset flag" "0,1" bitfld.long 0x24 29. "IWDGRSTF,Independent watchdog reset" "0,1" bitfld.long 0x24 28. "SFTRSTF,Software reset flag" "0,1" bitfld.long 0x24 27. "PORRSTF,POR/PDR reset flag" "0,1" bitfld.long 0x24 26. "PINRSTF,PIN reset flag" "0,1" bitfld.long 0x24 25. "OBLRSTF,Option byte loader reset" "0,1" bitfld.long 0x24 24. "RMVF,Remove reset flag" "0,1" rbitfld.long 0x24 1. "LSIRDY,Internal low speed oscillator" "0,1" newline bitfld.long 0x24 0. "LSION,Internal low speed oscillator" "0,1" line.long 0x28 "AHBRSTR,AHB peripheral reset register" bitfld.long 0x28 24. "TSCRST,Touch sensing controller" "0,1" bitfld.long 0x28 22. "IOPFRST,I/O port F reset" "0,1" bitfld.long 0x28 20. "IOPDRST,I/O port D reset" "0,1" bitfld.long 0x28 19. "IOPCRST,I/O port C reset" "0,1" bitfld.long 0x28 18. "IOPBRST,I/O port B reset" "0,1" bitfld.long 0x28 17. "IOPARST,I/O port A reset" "0,1" line.long 0x2C "CFGR2,Clock configuration register 2" hexmask.long.byte 0x2C 0.--3. 1. "PREDIV,PREDIV division factor" line.long 0x30 "CFGR3,Clock configuration register 3" bitfld.long 0x30 16.--17. "USART2SW,USART2 clock source" "0,1,2,3" bitfld.long 0x30 8. "ADCSW,ADC clock source selection" "0,1" bitfld.long 0x30 7. "USBSW,USB clock source selection" "0,1" bitfld.long 0x30 6. "CECSW,HDMI CEC clock source" "0,1" bitfld.long 0x30 4. "I2C1SW,I2C1 clock source" "0,1" bitfld.long 0x30 0.--1. "USART1SW,USART1 clock source" "0,1,2,3" line.long 0x34 "CR2,Clock control register 2" hexmask.long.word 0x34 23.--31. 1. "HSI48CAL,HSI48 factory clock" rbitfld.long 0x34 17. "HSI48RDY,HSI48 clock ready flag" "0,1" bitfld.long 0x34 16. "HSI48ON,HSI48 clock enable" "0,1" hexmask.long.byte 0x34 8.--15. 1. "HSI14CAL,HSI14 clock calibration" hexmask.long.byte 0x34 3.--7. 1. "HSI14TRIM,HSI14 clock trimming" bitfld.long 0x34 2. "HSI14DIS,HSI14 clock request from ADC" "0,1" rbitfld.long 0x34 1. "HSI14RDY,HR14 clock ready flag" "0,1" bitfld.long 0x34 0. "HSI14ON,HSI14 clock enable" "0,1" sif (cpuis("FT32F0??*")) group.long 0x38++0xB line.long 0x0 "HSECFG,HSE configuration register" bitfld.long 0x0 4. "HSEADD,HSE drive current add" "0,1" bitfld.long 0x0 1.--3. "HSEDRV,HSE drive capability" "0,1,2,3,4,5,6,7" newline bitfld.long 0x0 0. "HSEDRVEN,HSE drive enable" "0,1" line.long 0x4 "CFGR4,Clock configuration register4" bitfld.long 0x4 1. "SWS[2],System clock Switch status" "0,1" bitfld.long 0x4 0. "SW[2],System clock Switch" "0,1" line.long 0x8 "TRIM,Internal High Speed clock" bitfld.long 0x8 0. "HSICAL[8],System clock Switch" "0,1" endif tree.end tree "RTC (Real Time Clock)" base ad:0x40002800 group.long 0x0++0x13 line.long 0x0 "TR,time register" bitfld.long 0x0 22. "PM,AM/PM notation" "0,1" bitfld.long 0x0 20.--21. "HT,Hour tens in BCD format" "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "HU,Hour units in BCD format" bitfld.long 0x0 12.--14. "MNT,Minute tens in BCD format" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 8.--11. 1. "MNU,Minute units in BCD format" bitfld.long 0x0 4.--6. "ST,Second tens in BCD format" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--3. 1. "SU,Second units in BCD format" line.long 0x4 "DR,date register" hexmask.long.byte 0x4 20.--23. 1. "YT,Year tens in BCD format" hexmask.long.byte 0x4 16.--19. 1. "YU,Year units in BCD format" bitfld.long 0x4 13.--15. "WDU,Week day units" "0,1,2,3,4,5,6,7" bitfld.long 0x4 12. "MT,Month tens in BCD format" "0,1" hexmask.long.byte 0x4 8.--11. 1. "MU,Month units in BCD format" bitfld.long 0x4 4.--5. "DT,Date tens in BCD format" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "DU,Date units in BCD format" line.long 0x8 "CR,control register" bitfld.long 0x8 23. "COE,Calibration output enable" "0,1" sif (cpuis("FT32F0??*")) bitfld.long 0x8 21. "OSEL,Output selection" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 21.--22. "OSEL,Output selection" "0,1,2,3" endif bitfld.long 0x8 20. "POL,Output polarity" "0,1" bitfld.long 0x8 19. "COSEL,Calibration output" "0,1" bitfld.long 0x8 18. "BKP,Backup" "0,1" bitfld.long 0x8 17. "SUB1H,Subtract 1 hour (winter time" "0,1" bitfld.long 0x8 16. "ADD1H,Add 1 hour (summer time" "0,1" newline bitfld.long 0x8 15. "TSIE,Time-stamp interrupt" "0,1" bitfld.long 0x8 12. "ALRAIE,Alarm A interrupt enable" "0,1" bitfld.long 0x8 11. "TSE,timestamp enable" "0,1" bitfld.long 0x8 8. "ALRAE,Alarm A enable" "0,1" bitfld.long 0x8 6. "FMT,Hour format" "0,1" bitfld.long 0x8 5. "BYPSHAD,Bypass the shadow" "0,1" bitfld.long 0x8 4. "REFCKON,RTC_REFIN reference clock detection" "0,1" bitfld.long 0x8 3. "TSEDGE,Time-stamp event active" "0,1" line.long 0xC "ISR,initialization and status" rbitfld.long 0xC 16. "RECALPF,Recalibration pending Flag" "0,1" bitfld.long 0xC 14. "TAMP2F,RTC_TAMP2 detection flag" "0,1" bitfld.long 0xC 13. "TAMP1F,RTC_TAMP1 detection flag" "0,1" bitfld.long 0xC 12. "TSOVF,Time-stamp overflow flag" "0,1" bitfld.long 0xC 11. "TSF,Time-stamp flag" "0,1" bitfld.long 0xC 8. "ALRAF,Alarm A flag" "0,1" bitfld.long 0xC 7. "INIT,Initialization mode" "0,1" rbitfld.long 0xC 6. "INITF,Initialization flag" "0,1" newline bitfld.long 0xC 5. "RSF,Registers synchronization" "0,1" rbitfld.long 0xC 4. "INITS,Initialization status flag" "0,1" bitfld.long 0xC 3. "SHPF,Shift operation pending" "0,1" rbitfld.long 0xC 0. "ALRAWF,Alarm A write flag" "0,1" line.long 0x10 "PRER,prescaler register" hexmask.long.byte 0x10 16.--22. 1. "PREDIV_A,Asynchronous prescaler" hexmask.long.word 0x10 0.--14. 1. "PREDIV_S,Synchronous prescaler" group.long 0x1C++0x3 line.long 0x0 "ALRMAR,alarm A register" bitfld.long 0x0 31. "MSK4,Alarm A date mask" "0,1" bitfld.long 0x0 30. "WDSEL,Week day selection" "0,1" bitfld.long 0x0 28.--29. "DT,Date tens in BCD format." "0,1,2,3" hexmask.long.byte 0x0 24.--27. 1. "DU,Date units or day in BCD" bitfld.long 0x0 23. "MSK3,Alarm A hours mask" "0,1" bitfld.long 0x0 22. "PM,AM/PM notation" "0,1" bitfld.long 0x0 20.--21. "HT,Hour tens in BCD format." "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "HU,Hour units in BCD format." newline bitfld.long 0x0 15. "MSK2,Alarm A minutes mask" "0,1" bitfld.long 0x0 12.--14. "MNT,Minute tens in BCD format." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 8.--11. 1. "MNU,Minute units in BCD" bitfld.long 0x0 7. "MSK1,Alarm A seconds mask" "0,1" bitfld.long 0x0 4.--6. "ST,Second tens in BCD format." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--3. 1. "SU,Second units in BCD" wgroup.long 0x24++0x3 line.long 0x0 "WPR,write protection register" hexmask.long.byte 0x0 0.--7. 1. "KEY,Write protection key" rgroup.long 0x28++0x3 line.long 0x0 "SSR,sub second register" hexmask.long.word 0x0 0.--15. 1. "SS,Sub second value" wgroup.long 0x2C++0x3 line.long 0x0 "SHIFTR,shift control register" bitfld.long 0x0 31. "ADD1S,Add a second" "0,1" hexmask.long.word 0x0 0.--14. 1. "SUBFS,Subtract a fraction of a" rgroup.long 0x30++0xB line.long 0x0 "TSTR,timestamp time register" bitfld.long 0x0 22. "PM,AM/PM notation" "0,1" bitfld.long 0x0 20.--21. "HT,Hour tens in BCD format." "0,1,2,3" hexmask.long.byte 0x0 16.--19. 1. "HU,Hour units in BCD format." bitfld.long 0x0 12.--14. "MNT,Minute tens in BCD format." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 8.--11. 1. "MNU,Minute units in BCD" bitfld.long 0x0 4.--6. "ST,Second tens in BCD format." "0,1,2,3,4,5,6,7" hexmask.long.byte 0x0 0.--3. 1. "SU,Second units in BCD" line.long 0x4 "TSDR,timestamp date register" bitfld.long 0x4 13.--15. "WDU,Week day units" "0,1,2,3,4,5,6,7" bitfld.long 0x4 12. "MT,Month tens in BCD format" "0,1" hexmask.long.byte 0x4 8.--11. 1. "MU,Month units in BCD format" bitfld.long 0x4 4.--5. "DT,Date tens in BCD format" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "DU,Date units in BCD format" line.long 0x8 "TSSSR,time-stamp sub second register" hexmask.long.word 0x8 0.--15. 1. "SS,Sub second value" group.long 0x3C++0xB line.long 0x0 "CALR,calibration register" bitfld.long 0x0 15. "CALP,Use an 8-second calibration cycle" "0,1" bitfld.long 0x0 14. "CALW8,Use a 16-second calibration cycle" "0,1" bitfld.long 0x0 13. "CALW16,Use a 16-second calibration cycle" "0,1" hexmask.long.word 0x0 0.--8. 1. "CALM,Calibration minus" line.long 0x4 "TAFCR,tamper and alternate function configuration" bitfld.long 0x4 23. "PC15MODE,PC15 mode" "0,1" bitfld.long 0x4 22. "PC15VALUE,PC15 value" "0,1" bitfld.long 0x4 21. "PC14MODE,PC14 mode" "0,1" bitfld.long 0x4 20. "PC14VALUE,PC14 value" "0,1" bitfld.long 0x4 19. "PC13MODE,PC13 mode" "0,1" bitfld.long 0x4 18. "PC13VALUE,RTC_ALARM output type/PC13" "0,1" bitfld.long 0x4 15. "TAMP_PUDIS,RTC_TAMPx pull-up disable" "0,1" bitfld.long 0x4 13.--14. "TAMP_PRCH,RTC_TAMPx precharge" "0,1,2,3" newline bitfld.long 0x4 11.--12. "TAMPFLT,RTC_TAMPx filter count" "0,1,2,3" bitfld.long 0x4 8.--10. "TAMPFREQ,Tamper sampling frequency" "0,1,2,3,4,5,6,7" bitfld.long 0x4 7. "TAMPTS,Activate timestamp on tamper detection" "0,1" bitfld.long 0x4 4. "TAMP2_TRG,Active level for RTC_TAMP2" "0,1" bitfld.long 0x4 3. "TAMP2E,RTC_TAMP2 input detection" "0,1" bitfld.long 0x4 2. "TAMPIE,Tamper interrupt enable" "0,1" bitfld.long 0x4 1. "TAMP1TRG,Active level for RTC_TAMP1" "0,1" bitfld.long 0x4 0. "TAMP1E,RTC_TAMP1 input detection" "0,1" line.long 0x8 "ALRMASSR,alarm A sub second register" hexmask.long.byte 0x8 24.--27. 1. "MASKSS,Mask the most-significant bits starting" hexmask.long.word 0x8 0.--14. 1. "SS,Sub seconds value" sif (cpuis("FT32F072?*")) group.long 0x50++0x13 line.long 0x0 "BKP0R,backup register" hexmask.long 0x0 0.--31. 1. "BKP,BKP" line.long 0x4 "BKP1R,backup register" hexmask.long 0x4 0.--31. 1. "BKP,BKP" line.long 0x8 "BKP2R,backup register" hexmask.long 0x8 0.--31. 1. "BKP,BKP" line.long 0xC "BKP3R,backup register" hexmask.long 0xC 0.--31. 1. "BKP,BKP" line.long 0x10 "BKP4R,backup register" hexmask.long 0x10 0.--31. 1. "BKP,BKP" endif tree.end tree "SPI (Serial Peripheral Interface)" base ad:0x0 tree "SPI1" base ad:0x40013000 group.long 0x0++0x13 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 15. "BIDIMODE,Bidirectional data mode" "0,1" bitfld.long 0x0 14. "BIDIOE,Output enable in bidirectional" "0,1" bitfld.long 0x0 13. "CRCEN,Hardware CRC calculation" "0,1" bitfld.long 0x0 12. "CRCNEXT,CRC transfer next" "0,1" bitfld.long 0x0 11. "DFF,Data frame format" "0,1" bitfld.long 0x0 10. "RXONLY,Receive only" "0,1" bitfld.long 0x0 9. "SSM,Software slave management" "0,1" bitfld.long 0x0 8. "SSI,Internal slave select" "0,1" bitfld.long 0x0 7. "LSBFIRST,Frame format" "0,1" bitfld.long 0x0 6. "SPE,SPI enable" "0,1" newline bitfld.long 0x0 3.--5. "BR,Baud rate control" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "MSTR,Master selection" "0,1" bitfld.long 0x0 1. "CPOL,Clock polarity" "0,1" bitfld.long 0x0 0. "CPHA,Clock phase" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 14. "LDMA_TX,Last DMA transfer for" "0,1" bitfld.long 0x4 13. "LDMA_RX,Last DMA transfer for" "0,1" bitfld.long 0x4 12. "FRXTH,FIFO reception threshold" "0,1" hexmask.long.byte 0x4 8.--11. 1. "DS,Data size" bitfld.long 0x4 7. "TXEIE,Tx buffer empty interrupt" "0,1" bitfld.long 0x4 6. "RXNEIE,RX buffer not empty interrupt" "0,1" bitfld.long 0x4 5. "ERRIE,Error interrupt enable" "0,1" bitfld.long 0x4 4. "FRF,Frame format" "0,1" bitfld.long 0x4 3. "NSSP,NSS pulse management" "0,1" bitfld.long 0x4 2. "SSOE,SS output enable" "0,1" newline bitfld.long 0x4 1. "TXDMAEN,Tx buffer DMA enable" "0,1" bitfld.long 0x4 0. "RXDMAEN,Rx buffer DMA enable" "0,1" line.long 0x8 "SR,status register" rbitfld.long 0x8 11.--12. "FTLVL,FIFO transmission level" "0,1,2,3" rbitfld.long 0x8 9.--10. "FRLVL,FIFO reception level" "0,1,2,3" rbitfld.long 0x8 8. "TIFRFE,TI frame format error" "0,1" rbitfld.long 0x8 7. "BSY,Busy flag" "0,1" rbitfld.long 0x8 6. "OVR,Overrun flag" "0,1" rbitfld.long 0x8 5. "MODF,Mode fault" "0,1" bitfld.long 0x8 4. "CRCERR,CRC error flag" "0,1" rbitfld.long 0x8 3. "UDR,Underrun flag" "0,1" rbitfld.long 0x8 2. "CHSIDE,Channel side" "0,1" rbitfld.long 0x8 1. "TXE,Transmit buffer empty" "0,1" newline rbitfld.long 0x8 0. "RXNE,Receive buffer not empty" "0,1" line.long 0xC "DR,data register" hexmask.long.word 0xC 0.--15. 1. "DR,Data register" line.long 0x10 "CRCPR,CRC polynomial register" hexmask.long.word 0x10 0.--15. 1. "CRCPOLY,CRC polynomial register" rgroup.long 0x14++0x7 line.long 0x0 "RXCRCR,RX CRC register" hexmask.long.word 0x0 0.--15. 1. "RxCRC,Rx CRC register" line.long 0x4 "TXCRCR,TX CRC register" hexmask.long.word 0x4 0.--15. 1. "TxCRC,Tx CRC register" group.long 0x1C++0x7 line.long 0x0 "I2SCFGR,I2S configuration register" bitfld.long 0x0 11. "I2SMOD,I2S mode selection" "0,1" bitfld.long 0x0 10. "I2SE,I2S Enable" "0,1" bitfld.long 0x0 8.--9. "I2SCFG,I2S configuration mode" "0,1,2,3" bitfld.long 0x0 7. "PCMSYNC,PCM frame synchronization" "0,1" bitfld.long 0x0 4.--5. "I2SSTD,I2S standard selection" "0,1,2,3" bitfld.long 0x0 3. "CKPOL,Steady state clock" "0,1" bitfld.long 0x0 1.--2. "DATLEN,Data length to be" "0,1,2,3" bitfld.long 0x0 0. "CHLEN,Channel length (number of bits per audio" "0,1" line.long 0x4 "I2SPR,I2S prescaler register" bitfld.long 0x4 9. "MCKOE,Master clock output enable" "0,1" bitfld.long 0x4 8. "ODD,Odd factor for the" "0,1" hexmask.long.byte 0x4 0.--7. 1. "I2SDIV,I2S Linear prescaler" tree.end tree "SPI2" base ad:0x40003800 group.long 0x0++0x13 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 15. "BIDIMODE,Bidirectional data mode" "0,1" bitfld.long 0x0 14. "BIDIOE,Output enable in bidirectional" "0,1" bitfld.long 0x0 13. "CRCEN,Hardware CRC calculation" "0,1" bitfld.long 0x0 12. "CRCNEXT,CRC transfer next" "0,1" bitfld.long 0x0 11. "DFF,Data frame format" "0,1" bitfld.long 0x0 10. "RXONLY,Receive only" "0,1" bitfld.long 0x0 9. "SSM,Software slave management" "0,1" bitfld.long 0x0 8. "SSI,Internal slave select" "0,1" bitfld.long 0x0 7. "LSBFIRST,Frame format" "0,1" bitfld.long 0x0 6. "SPE,SPI enable" "0,1" newline bitfld.long 0x0 3.--5. "BR,Baud rate control" "0,1,2,3,4,5,6,7" bitfld.long 0x0 2. "MSTR,Master selection" "0,1" bitfld.long 0x0 1. "CPOL,Clock polarity" "0,1" bitfld.long 0x0 0. "CPHA,Clock phase" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 14. "LDMA_TX,Last DMA transfer for" "0,1" bitfld.long 0x4 13. "LDMA_RX,Last DMA transfer for" "0,1" bitfld.long 0x4 12. "FRXTH,FIFO reception threshold" "0,1" hexmask.long.byte 0x4 8.--11. 1. "DS,Data size" bitfld.long 0x4 7. "TXEIE,Tx buffer empty interrupt" "0,1" bitfld.long 0x4 6. "RXNEIE,RX buffer not empty interrupt" "0,1" bitfld.long 0x4 5. "ERRIE,Error interrupt enable" "0,1" bitfld.long 0x4 4. "FRF,Frame format" "0,1" bitfld.long 0x4 3. "NSSP,NSS pulse management" "0,1" bitfld.long 0x4 2. "SSOE,SS output enable" "0,1" newline bitfld.long 0x4 1. "TXDMAEN,Tx buffer DMA enable" "0,1" bitfld.long 0x4 0. "RXDMAEN,Rx buffer DMA enable" "0,1" line.long 0x8 "SR,status register" rbitfld.long 0x8 11.--12. "FTLVL,FIFO transmission level" "0,1,2,3" rbitfld.long 0x8 9.--10. "FRLVL,FIFO reception level" "0,1,2,3" rbitfld.long 0x8 8. "TIFRFE,TI frame format error" "0,1" rbitfld.long 0x8 7. "BSY,Busy flag" "0,1" rbitfld.long 0x8 6. "OVR,Overrun flag" "0,1" rbitfld.long 0x8 5. "MODF,Mode fault" "0,1" bitfld.long 0x8 4. "CRCERR,CRC error flag" "0,1" rbitfld.long 0x8 3. "UDR,Underrun flag" "0,1" rbitfld.long 0x8 2. "CHSIDE,Channel side" "0,1" rbitfld.long 0x8 1. "TXE,Transmit buffer empty" "0,1" newline rbitfld.long 0x8 0. "RXNE,Receive buffer not empty" "0,1" line.long 0xC "DR,data register" hexmask.long.word 0xC 0.--15. 1. "DR,Data register" line.long 0x10 "CRCPR,CRC polynomial register" hexmask.long.word 0x10 0.--15. 1. "CRCPOLY,CRC polynomial register" rgroup.long 0x14++0x7 line.long 0x0 "RXCRCR,RX CRC register" hexmask.long.word 0x0 0.--15. 1. "RxCRC,Rx CRC register" line.long 0x4 "TXCRCR,TX CRC register" hexmask.long.word 0x4 0.--15. 1. "TxCRC,Tx CRC register" group.long 0x1C++0x7 line.long 0x0 "I2SCFGR,I2S configuration register" bitfld.long 0x0 11. "I2SMOD,I2S mode selection" "0,1" bitfld.long 0x0 10. "I2SE,I2S Enable" "0,1" bitfld.long 0x0 8.--9. "I2SCFG,I2S configuration mode" "0,1,2,3" bitfld.long 0x0 7. "PCMSYNC,PCM frame synchronization" "0,1" bitfld.long 0x0 4.--5. "I2SSTD,I2S standard selection" "0,1,2,3" bitfld.long 0x0 3. "CKPOL,Steady state clock" "0,1" bitfld.long 0x0 1.--2. "DATLEN,Data length to be" "0,1,2,3" bitfld.long 0x0 0. "CHLEN,Channel length (number of bits per audio" "0,1" line.long 0x4 "I2SPR,I2S prescaler register" bitfld.long 0x4 9. "MCKOE,Master clock output enable" "0,1" bitfld.long 0x4 8. "ODD,Odd factor for the" "0,1" hexmask.long.byte 0x4 0.--7. 1. "I2SDIV,I2S Linear prescaler" tree.end tree.end tree "SYSCFG (System Configuration Controller)" base ad:0x40010000 group.long 0x0++0x3 line.long 0x0 "CFGR1,configuration register 1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 30. "TIM3_DMA_RMP,TIM3 DMA request remapping" "0,1" bitfld.long 0x0 29. "TIM2_DMA_RMP,TIM2 DMA request remapping" "0,1" bitfld.long 0x0 28. "TIM1_DMA_RMP,TIM1 DMA request remapping" "0,1" bitfld.long 0x0 27. "I2C1_DMA_RMP,I2C1 DMA request remapping" "0,1" bitfld.long 0x0 26. "USART3_DMA_RMP,USART3 DMA request remapping" "0,1" bitfld.long 0x0 25. "USART2_DMA_RMP,USART2 DMA request remapping" "0,1" newline bitfld.long 0x0 24. "SPI2_DMA_RMP,SPI2 DMA request remapping" "0,1" endif bitfld.long 0x0 21. "I2C2_FM_plus,FM+ driving capability activation for" "0,1" bitfld.long 0x0 20. "I2C1_FM_plus,FM+ driving capability activation for" "0,1" bitfld.long 0x0 19. "I2C_PB9_FM,Fast Mode Plus (FM+) driving capability" "0,1" bitfld.long 0x0 18. "I2C_PB8_FM,Fast Mode Plus (FM+) driving capability" "0,1" bitfld.long 0x0 17. "I2C_PB7_FM,Fast Mode Plus (FM+) driving capability" "0,1" newline bitfld.long 0x0 16. "I2C_PB6_FM,Fast Mode Plus (FM plus) driving" "0,1" bitfld.long 0x0 12. "TIM17_DMA_RMP,TIM17 DMA request remapping" "0,1" bitfld.long 0x0 11. "TIM16_DMA_RMP,TIM16 DMA request remapping" "0,1" bitfld.long 0x0 10. "USART1_RX_DMA_RMP,USART1_RX DMA request remapping" "0,1" bitfld.long 0x0 9. "USART1_TX_DMA_RMP,USART1_TX DMA remapping" "0,1" bitfld.long 0x0 8. "ADC_DMA_RMP,ADC DMA remapping bit" "0,1" newline sif (cpuis("FT32F0??*")) bitfld.long 0x0 6.--7. "IRDA_ENV_SEL,Memory mapping selection" "0,1,2,3" endif bitfld.long 0x0 0.--1. "MEM_MODE,Memory mapping selection" "0,1,2,3" group.long 0x8++0x13 line.long 0x0 "EXTICR1,external interrupt configuration register" hexmask.long.byte 0x0 12.--15. 1. "EXTI3,EXTI 3 configuration bits" hexmask.long.byte 0x0 8.--11. 1. "EXTI2,EXTI 2 configuration bits" hexmask.long.byte 0x0 4.--7. 1. "EXTI1,EXTI 1 configuration bits" hexmask.long.byte 0x0 0.--3. 1. "EXTI0,EXTI 0 configuration bits" line.long 0x4 "EXTICR2,external interrupt configuration register" hexmask.long.byte 0x4 12.--15. 1. "EXTI7,EXTI 7 configuration bits" hexmask.long.byte 0x4 8.--11. 1. "EXTI6,EXTI 6 configuration bits" hexmask.long.byte 0x4 4.--7. 1. "EXTI5,EXTI 5 configuration bits" hexmask.long.byte 0x4 0.--3. 1. "EXTI4,EXTI 4 configuration bits" line.long 0x8 "EXTICR3,external interrupt configuration register" hexmask.long.byte 0x8 12.--15. 1. "EXTI11,EXTI 11 configuration bits" hexmask.long.byte 0x8 8.--11. 1. "EXTI10,EXTI 10 configuration bits" hexmask.long.byte 0x8 4.--7. 1. "EXTI9,EXTI 9 configuration bits" hexmask.long.byte 0x8 0.--3. 1. "EXTI8,EXTI 8 configuration bits" line.long 0xC "EXTICR4,external interrupt configuration register" hexmask.long.byte 0xC 12.--15. 1. "EXTI15,EXTI 15 configuration bits" hexmask.long.byte 0xC 8.--11. 1. "EXTI14,EXTI 14 configuration bits" hexmask.long.byte 0xC 4.--7. 1. "EXTI13,EXTI 13 configuration bits" hexmask.long.byte 0xC 0.--3. 1. "EXTI12,EXTI 12 configuration bits" line.long 0x10 "CFGR2,configuration register 2" sif (cpuis("FT32F072?*")) bitfld.long 0x10 8. "SRAM_PEF,SRAM parity flag" "0,1" endif bitfld.long 0x10 2. "PVD_LOCK,PVD lock enable bit" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x10 1. "SRAM_PARITY_LOCK,SRAM parity lock bit" "0,1" endif bitfld.long 0x10 0. "LOCUP_LOCK,Cortex-M0 LOCKUP bit enable" "0,1" tree.end tree "TIM (Timers)" base ad:0x0 sif (cpuis("FT32F072?*")) tree "TIM2 (General-Purpose Timer)" base ad:0x40000000 group.long 0x0++0x13 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 8.--9. "CKD,Clock division" "0,1,2,3" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 5.--6. "CMS,Center-aligned mode" "0,1,2,3" bitfld.long 0x0 4. "DIR,Direction" "0,1" bitfld.long 0x0 3. "OPM,One-pulse mode" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 7. "TI1S,TI1 selection" "0,1" bitfld.long 0x4 4.--6. "MMS,Master mode selection" "0,1,2,3,4,5,6,7" bitfld.long 0x4 3. "CCDS,Capture/compare DMA" "0,1" line.long 0x8 "SMCR,slave mode control register" bitfld.long 0x8 15. "ETP,External trigger polarity" "0,1" bitfld.long 0x8 14. "ECE,External clock enable" "0,1" bitfld.long 0x8 12.--13. "ETPS,External trigger prescaler" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "ETF,External trigger filter" bitfld.long 0x8 7. "MSM,Master/Slave mode" "0,1" bitfld.long 0x8 4.--6. "TS,Trigger selection" "0,1,2,3,4,5,6,7" bitfld.long 0x8 0.--2. "SMS,Slave mode selection" "0,1,2,3,4,5,6,7" line.long 0xC "DIER,DMA/Interrupt enable register" bitfld.long 0xC 14. "TDE,Trigger DMA request enable" "0,1" bitfld.long 0xC 13. "COMDE,Reserved" "0,1" bitfld.long 0xC 12. "CC4DE,Capture/Compare 4 DMA request" "0,1" bitfld.long 0xC 11. "CC3DE,Capture/Compare 3 DMA request" "0,1" bitfld.long 0xC 10. "CC2DE,Capture/Compare 2 DMA request" "0,1" bitfld.long 0xC 9. "CC1DE,Capture/Compare 1 DMA request" "0,1" bitfld.long 0xC 8. "UDE,Update DMA request enable" "0,1" bitfld.long 0xC 6. "TIE,Trigger interrupt enable" "0,1" bitfld.long 0xC 4. "CC4IE,Capture/Compare 4 interrupt" "0,1" bitfld.long 0xC 3. "CC3IE,Capture/Compare 3 interrupt" "0,1" bitfld.long 0xC 2. "CC2IE,Capture/Compare 2 interrupt" "0,1" newline bitfld.long 0xC 1. "CC1IE,Capture/Compare 1 interrupt" "0,1" bitfld.long 0xC 0. "UIE,Update interrupt enable" "0,1" line.long 0x10 "SR,status register" bitfld.long 0x10 12. "CC4OF,Capture/Compare 4 overcapture" "0,1" bitfld.long 0x10 11. "CC3OF,Capture/Compare 3 overcapture" "0,1" bitfld.long 0x10 10. "CC2OF,Capture/compare 2 overcapture" "0,1" bitfld.long 0x10 9. "CC1OF,Capture/Compare 1 overcapture" "0,1" bitfld.long 0x10 6. "TIF,Trigger interrupt flag" "0,1" bitfld.long 0x10 4. "CC4IF,Capture/Compare 4 interrupt" "0,1" bitfld.long 0x10 3. "CC3IF,Capture/Compare 3 interrupt" "0,1" bitfld.long 0x10 2. "CC2IF,Capture/Compare 2 interrupt" "0,1" bitfld.long 0x10 1. "CC1IF,Capture/compare 1 interrupt" "0,1" bitfld.long 0x10 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 6. "TG,Trigger generation" "0,1" bitfld.long 0x0 4. "CC4G,Capture/compare 4" "0,1" bitfld.long 0x0 3. "CC3G,Capture/compare 3" "0,1" bitfld.long 0x0 2. "CC2G,Capture/compare 2" "0,1" bitfld.long 0x0 1. "CC1G,Capture/compare 1" "0,1" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x18++0x3 line.long 0x0 "CCMR1_Output,capture/compare mode register 1 (output" bitfld.long 0x0 15. "OC2CE,Output compare 2 clear" "0,1" bitfld.long 0x0 12.--14. "OC2M,Output compare 2 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 11. "OC2PE,Output compare 2 preload" "0,1" bitfld.long 0x0 10. "OC2FE,Output compare 2 fast" "0,1" bitfld.long 0x0 8.--9. "CC2S,Capture/Compare 2" "0,1,2,3" bitfld.long 0x0 7. "OC1CE,Output compare 1 clear" "0,1" bitfld.long 0x0 4.--6. "OC1M,Output compare 1 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 3. "OC1PE,Output compare 1 preload" "0,1" bitfld.long 0x0 2. "OC1FE,Output compare 1 fast" "0,1" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x18++0x7 line.long 0x0 "CCMR1_Input,capture/compare mode register 1 (input" hexmask.long.byte 0x0 12.--15. 1. "IC2F,Input capture 2 filter" bitfld.long 0x0 10.--11. "IC2PSC,Input capture 2 prescaler" "0,1,2,3" bitfld.long 0x0 8.--9. "CC2S,Capture/compare 2" "0,1,2,3" hexmask.long.byte 0x0 4.--7. 1. "IC1F,Input capture 1 filter" bitfld.long 0x0 2.--3. "IC1PSC,Input capture 1 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" line.long 0x4 "CCMR2_Output,capture/compare mode register 2 (output" bitfld.long 0x4 15. "OC4CE,Output compare 4 clear" "0,1" bitfld.long 0x4 12.--14. "OC4M,Output compare 4 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x4 11. "OC4PE,Output compare 4 preload" "0,1" bitfld.long 0x4 10. "OC4FE,Output compare 4 fast" "0,1" bitfld.long 0x4 8.--9. "CC4S,Capture/Compare 4" "0,1,2,3" bitfld.long 0x4 7. "OC3CE,Output compare 3 clear" "0,1" bitfld.long 0x4 4.--6. "OC3M,Output compare 3 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x4 3. "OC3PE,Output compare 3 preload" "0,1" bitfld.long 0x4 2. "OC3FE,Output compare 3 fast" "0,1" bitfld.long 0x4 0.--1. "CC3S,Capture/Compare 3" "0,1,2,3" group.long 0x1C++0x13 line.long 0x0 "CCMR2_Input,capture/compare mode register 2 (input" hexmask.long.byte 0x0 12.--15. 1. "IC4F,Input capture 4 filter" bitfld.long 0x0 10.--11. "IC4PSC,Input capture 4 prescaler" "0,1,2,3" bitfld.long 0x0 8.--9. "CC4S,Capture/Compare 4" "0,1,2,3" hexmask.long.byte 0x0 4.--7. 1. "IC3F,Input capture 3 filter" bitfld.long 0x0 2.--3. "IC3PSC,Input capture 3 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC3S,Capture/Compare 3" "0,1,2,3" line.long 0x4 "CCER,capture/compare enable" bitfld.long 0x4 15. "CC4NP,Capture/Compare 4 output" "0,1" bitfld.long 0x4 13. "CC4P,Capture/Compare 3 output" "0,1" bitfld.long 0x4 12. "CC4E,Capture/Compare 4 output" "0,1" bitfld.long 0x4 11. "CC3NP,Capture/Compare 3 output" "0,1" bitfld.long 0x4 9. "CC3P,Capture/Compare 3 output" "0,1" bitfld.long 0x4 8. "CC3E,Capture/Compare 3 output" "0,1" bitfld.long 0x4 7. "CC2NP,Capture/Compare 2 output" "0,1" bitfld.long 0x4 5. "CC2P,Capture/Compare 2 output" "0,1" bitfld.long 0x4 4. "CC2E,Capture/Compare 2 output" "0,1" bitfld.long 0x4 3. "CC1NP,Capture/Compare 1 output" "0,1" bitfld.long 0x4 1. "CC1P,Capture/Compare 1 output" "0,1" newline bitfld.long 0x4 0. "CC1E,Capture/Compare 1 output" "0,1" line.long 0x8 "CNT,counter" hexmask.long.word 0x8 16.--31. 1. "CNT_H,High counter value (TIM2" hexmask.long.word 0x8 0.--15. 1. "CNT_L,Low counter value" line.long 0xC "PSC,prescaler" hexmask.long.word 0xC 0.--15. 1. "PSC,Prescaler value" line.long 0x10 "ARR,auto-reload register" hexmask.long.word 0x10 16.--31. 1. "ARR_H,High Auto-reload value (TIM2" hexmask.long.word 0x10 0.--15. 1. "ARR_L,Low Auto-reload value" group.long 0x34++0xF line.long 0x0 "CCR1,capture/compare register 1" hexmask.long.word 0x0 16.--31. 1. "CCR1_H,High Capture/Compare 1 value (TIM2" hexmask.long.word 0x0 0.--15. 1. "CCR1_L,Low Capture/Compare 1" line.long 0x4 "CCR2,capture/compare register 2" hexmask.long.word 0x4 16.--31. 1. "CCR2_H,High Capture/Compare 2 value (TIM2" hexmask.long.word 0x4 0.--15. 1. "CCR2_L,Low Capture/Compare 2" line.long 0x8 "CCR3,capture/compare register 3" hexmask.long.word 0x8 16.--31. 1. "CCR3_H,High Capture/Compare value (TIM2" hexmask.long.word 0x8 0.--15. 1. "CCR3_L,Low Capture/Compare value" line.long 0xC "CCR4,capture/compare register 4" hexmask.long.word 0xC 16.--31. 1. "CCR4_H,High Capture/Compare value (TIM2" hexmask.long.word 0xC 0.--15. 1. "CCR4_L,Low Capture/Compare value" group.long 0x48++0x7 line.long 0x0 "DCR,DMA control register" hexmask.long.byte 0x0 8.--12. 1. "DBL,DMA burst length" hexmask.long.byte 0x0 0.--4. 1. "DBA,DMA base address" line.long 0x4 "DMAR,DMA address for full transfer" hexmask.long.word 0x4 0.--15. 1. "DMAR,DMA register for burst" tree.end tree "TIM7 (Basic Timer)" base ad:0x40001400 group.long 0x0++0x7 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 3. "OPM,One-pulse mode" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 4.--6. "MMS,Master mode selection" "0,1,2,3,4,5,6,7" group.long 0xC++0x7 line.long 0x0 "DIER,DMA/Interrupt enable register" bitfld.long 0x0 8. "UDE,Update DMA request enable" "0,1" bitfld.long 0x0 0. "UIE,Update interrupt enable" "0,1" line.long 0x4 "SR,status register" bitfld.long 0x4 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x24++0xB line.long 0x0 "CNT,counter" hexmask.long.word 0x0 0.--15. 1. "CNT,Low counter value" line.long 0x4 "PSC,prescaler" hexmask.long.word 0x4 0.--15. 1. "PSC,Prescaler value" line.long 0x8 "ARR,auto-reload register" hexmask.long.word 0x8 0.--15. 1. "ARR,Low Auto-reload value" tree.end endif tree "TIM1 (Advanced Timer)" base ad:0x40012C00 group.long 0x0++0x13 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 8.--9. "CKD,Clock division" "0,1,2,3" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 5.--6. "CMS,Center-aligned mode" "0,1,2,3" bitfld.long 0x0 4. "DIR,Direction" "0,1" bitfld.long 0x0 3. "OPM,One-pulse mode" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 14. "OIS4,Output Idle state 4" "0,1" bitfld.long 0x4 13. "OIS3N,Output Idle state 3" "0,1" bitfld.long 0x4 12. "OIS3,Output Idle state 3" "0,1" bitfld.long 0x4 11. "OIS2N,Output Idle state 2" "0,1" bitfld.long 0x4 10. "OIS2,Output Idle state 2" "0,1" bitfld.long 0x4 9. "OIS1N,Output Idle state 1" "0,1" bitfld.long 0x4 8. "OIS1,Output Idle state 1" "0,1" bitfld.long 0x4 7. "TI1S,TI1 selection" "0,1" bitfld.long 0x4 4.--6. "MMS,Master mode selection" "0,1,2,3,4,5,6,7" bitfld.long 0x4 3. "CCDS,Capture/compare DMA" "0,1" bitfld.long 0x4 2. "CCUS,Capture/compare control update" "0,1" bitfld.long 0x4 0. "CCPC,Capture/compare preloaded" "0,1" line.long 0x8 "SMCR,slave mode control register" bitfld.long 0x8 15. "ETP,External trigger polarity" "0,1" bitfld.long 0x8 14. "ECE,External clock enable" "0,1" bitfld.long 0x8 12.--13. "ETPS,External trigger prescaler" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "ETF,External trigger filter" bitfld.long 0x8 7. "MSM,Master/Slave mode" "0,1" bitfld.long 0x8 4.--6. "TS,Trigger selection" "0,1,2,3,4,5,6,7" bitfld.long 0x8 0.--2. "SMS,Slave mode selection" "0,1,2,3,4,5,6,7" line.long 0xC "DIER,DMA/Interrupt enable register" bitfld.long 0xC 14. "TDE,Trigger DMA request enable" "0,1" bitfld.long 0xC 13. "COMDE,COM DMA request enable" "0,1" bitfld.long 0xC 12. "CC4DE,Capture/Compare 4 DMA request" "0,1" bitfld.long 0xC 11. "CC3DE,Capture/Compare 3 DMA request" "0,1" bitfld.long 0xC 10. "CC2DE,Capture/Compare 2 DMA request" "0,1" bitfld.long 0xC 9. "CC1DE,Capture/Compare 1 DMA request" "0,1" bitfld.long 0xC 8. "UDE,Update DMA request enable" "0,1" bitfld.long 0xC 7. "BIE,Break interrupt enable" "0,1" bitfld.long 0xC 6. "TIE,Trigger interrupt enable" "0,1" bitfld.long 0xC 5. "COMIE,COM interrupt enable" "0,1" bitfld.long 0xC 4. "CC4IE,Capture/Compare 4 interrupt" "0,1" bitfld.long 0xC 3. "CC3IE,Capture/Compare 3 interrupt" "0,1" newline bitfld.long 0xC 2. "CC2IE,Capture/Compare 2 interrupt" "0,1" bitfld.long 0xC 1. "CC1IE,Capture/Compare 1 interrupt" "0,1" bitfld.long 0xC 0. "UIE,Update interrupt enable" "0,1" line.long 0x10 "SR,status register" bitfld.long 0x10 12. "CC4OF,Capture/Compare 4 overcapture" "0,1" bitfld.long 0x10 11. "CC3OF,Capture/Compare 3 overcapture" "0,1" bitfld.long 0x10 10. "CC2OF,Capture/compare 2 overcapture" "0,1" bitfld.long 0x10 9. "CC1OF,Capture/Compare 1 overcapture" "0,1" bitfld.long 0x10 7. "BIF,Break interrupt flag" "0,1" bitfld.long 0x10 6. "TIF,Trigger interrupt flag" "0,1" bitfld.long 0x10 5. "COMIF,COM interrupt flag" "0,1" bitfld.long 0x10 4. "CC4IF,Capture/Compare 4 interrupt" "0,1" bitfld.long 0x10 3. "CC3IF,Capture/Compare 3 interrupt" "0,1" bitfld.long 0x10 2. "CC2IF,Capture/Compare 2 interrupt" "0,1" bitfld.long 0x10 1. "CC1IF,Capture/compare 1 interrupt" "0,1" bitfld.long 0x10 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 7. "BG,Break generation" "0,1" bitfld.long 0x0 6. "TG,Trigger generation" "0,1" bitfld.long 0x0 5. "COMG,Capture/Compare control update" "0,1" bitfld.long 0x0 4. "CC4G,Capture/compare 4" "0,1" bitfld.long 0x0 3. "CC3G,Capture/compare 3" "0,1" bitfld.long 0x0 2. "CC2G,Capture/compare 2" "0,1" bitfld.long 0x0 1. "CC1G,Capture/compare 1" "0,1" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x18++0x3 line.long 0x0 "CCMR1_Output,capture/compare mode register (output" bitfld.long 0x0 15. "OC2CE,Output Compare 2 clear" "0,1" bitfld.long 0x0 12.--14. "OC2M,Output Compare 2 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 11. "OC2PE,Output Compare 2 preload" "0,1" bitfld.long 0x0 10. "OC2FE,Output Compare 2 fast" "0,1" bitfld.long 0x0 8.--9. "CC2S,Capture/Compare 2" "0,1,2,3" bitfld.long 0x0 7. "OC1CE,Output Compare 1 clear" "0,1" bitfld.long 0x0 4.--6. "OC1M,Output Compare 1 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 3. "OC1PE,Output Compare 1 preload" "0,1" bitfld.long 0x0 2. "OC1FE,Output Compare 1 fast" "0,1" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x18++0x7 line.long 0x0 "CCMR1_Input,capture/compare mode register 1 (input" hexmask.long.byte 0x0 12.--15. 1. "IC2F,Input capture 2 filter" bitfld.long 0x0 10.--11. "IC2PCS,Input capture 2 prescaler" "0,1,2,3" bitfld.long 0x0 8.--9. "CC2S,Capture/Compare 2" "0,1,2,3" hexmask.long.byte 0x0 4.--7. 1. "IC1F,Input capture 1 filter" bitfld.long 0x0 2.--3. "IC1PCS,Input capture 1 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" line.long 0x4 "CCMR2_Output,capture/compare mode register (output" bitfld.long 0x4 15. "OC4CE,Output compare 4 clear" "0,1" bitfld.long 0x4 12.--14. "OC4M,Output compare 4 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x4 11. "OC4PE,Output compare 4 preload" "0,1" bitfld.long 0x4 10. "OC4FE,Output compare 4 fast" "0,1" bitfld.long 0x4 8.--9. "CC4S,Capture/Compare 4" "0,1,2,3" bitfld.long 0x4 7. "OC3CE,Output compare 3 clear" "0,1" bitfld.long 0x4 4.--6. "OC3M,Output compare 3 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x4 3. "OC3PE,Output compare 3 preload" "0,1" bitfld.long 0x4 2. "OC3FE,Output compare 3 fast" "0,1" bitfld.long 0x4 0.--1. "CC3S,Capture/Compare 3" "0,1,2,3" group.long 0x1C++0x33 line.long 0x0 "CCMR2_Input,capture/compare mode register 2 (input" hexmask.long.byte 0x0 12.--15. 1. "IC4F,Input capture 4 filter" bitfld.long 0x0 10.--11. "IC4PSC,Input capture 4 prescaler" "0,1,2,3" bitfld.long 0x0 8.--9. "CC4S,Capture/Compare 4" "0,1,2,3" hexmask.long.byte 0x0 4.--7. 1. "IC3F,Input capture 3 filter" bitfld.long 0x0 2.--3. "IC3PSC,Input capture 3 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC3S,Capture/compare 3" "0,1,2,3" line.long 0x4 "CCER,capture/compare enable" bitfld.long 0x4 13. "CC4P,Capture/Compare 3 output" "0,1" bitfld.long 0x4 12. "CC4E,Capture/Compare 4 output" "0,1" bitfld.long 0x4 11. "CC3NP,Capture/Compare 3 output" "0,1" bitfld.long 0x4 10. "CC3NE,Capture/Compare 3 complementary output" "0,1" bitfld.long 0x4 9. "CC3P,Capture/Compare 3 output" "0,1" bitfld.long 0x4 8. "CC3E,Capture/Compare 3 output" "0,1" bitfld.long 0x4 7. "CC2NP,Capture/Compare 2 output" "0,1" bitfld.long 0x4 6. "CC2NE,Capture/Compare 2 complementary output" "0,1" bitfld.long 0x4 5. "CC2P,Capture/Compare 2 output" "0,1" bitfld.long 0x4 4. "CC2E,Capture/Compare 2 output" "0,1" bitfld.long 0x4 3. "CC1NP,Capture/Compare 1 output" "0,1" bitfld.long 0x4 2. "CC1NE,Capture/Compare 1 complementary output" "0,1" newline bitfld.long 0x4 1. "CC1P,Capture/Compare 1 output" "0,1" bitfld.long 0x4 0. "CC1E,Capture/Compare 1 output" "0,1" line.long 0x8 "CNT,counter" hexmask.long.word 0x8 0.--15. 1. "CNT,counter value" line.long 0xC "PSC,prescaler" hexmask.long.word 0xC 0.--15. 1. "PSC,Prescaler value" line.long 0x10 "ARR,auto-reload register" hexmask.long.word 0x10 0.--15. 1. "ARR,Auto-reload value" line.long 0x14 "RCR,repetition counter register" hexmask.long.byte 0x14 0.--7. 1. "REP,Repetition counter value" line.long 0x18 "CCR1,capture/compare register 1" hexmask.long.word 0x18 0.--15. 1. "CCR1,Capture/Compare 1 value" line.long 0x1C "CCR2,capture/compare register 2" hexmask.long.word 0x1C 0.--15. 1. "CCR2,Capture/Compare 2 value" line.long 0x20 "CCR3,capture/compare register 3" hexmask.long.word 0x20 0.--15. 1. "CCR3,Capture/Compare 3 value" line.long 0x24 "CCR4,capture/compare register 4" hexmask.long.word 0x24 0.--15. 1. "CCR4,Capture/Compare 3 value" line.long 0x28 "BDTR,break and dead-time register" bitfld.long 0x28 15. "MOE,Main output enable" "0,1" bitfld.long 0x28 14. "AOE,Automatic output enable" "0,1" bitfld.long 0x28 13. "BKP,Break polarity" "0,1" bitfld.long 0x28 12. "BKE,Break enable" "0,1" bitfld.long 0x28 11. "OSSR,Off-state selection for Run" "0,1" bitfld.long 0x28 10. "OSSI,Off-state selection for Idle" "0,1" bitfld.long 0x28 8.--9. "LOCK,Lock configuration" "0,1,2,3" hexmask.long.byte 0x28 0.--7. 1. "DTG,Dead-time generator setup" line.long 0x2C "DCR,DMA control register" hexmask.long.byte 0x2C 8.--12. 1. "DBL,DMA burst length" hexmask.long.byte 0x2C 0.--4. 1. "DBA,DMA base address" line.long 0x30 "DMAR,DMA address for full transfer" hexmask.long.word 0x30 0.--15. 1. "DMAB,DMA register for burst" tree.end tree "TIM3 (General-Purpose Timer)" base ad:0x40000400 group.long 0x0++0x13 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 8.--9. "CKD,Clock division" "0,1,2,3" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 5.--6. "CMS,Center-aligned mode" "0,1,2,3" bitfld.long 0x0 4. "DIR,Direction" "0,1" bitfld.long 0x0 3. "OPM,One-pulse mode" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 7. "TI1S,TI1 selection" "0,1" bitfld.long 0x4 4.--6. "MMS,Master mode selection" "0,1,2,3,4,5,6,7" bitfld.long 0x4 3. "CCDS,Capture/compare DMA" "0,1" line.long 0x8 "SMCR,slave mode control register" bitfld.long 0x8 15. "ETP,External trigger polarity" "0,1" bitfld.long 0x8 14. "ECE,External clock enable" "0,1" bitfld.long 0x8 12.--13. "ETPS,External trigger prescaler" "0,1,2,3" hexmask.long.byte 0x8 8.--11. 1. "ETF,External trigger filter" bitfld.long 0x8 7. "MSM,Master/Slave mode" "0,1" bitfld.long 0x8 4.--6. "TS,Trigger selection" "0,1,2,3,4,5,6,7" bitfld.long 0x8 0.--2. "SMS,Slave mode selection" "0,1,2,3,4,5,6,7" line.long 0xC "DIER,DMA/Interrupt enable register" bitfld.long 0xC 14. "TDE,Trigger DMA request enable" "0,1" bitfld.long 0xC 13. "COMDE,COM DMA request enable" "0,1" bitfld.long 0xC 12. "CC4DE,Capture/Compare 4 DMA request" "0,1" bitfld.long 0xC 11. "CC3DE,Capture/Compare 3 DMA request" "0,1" bitfld.long 0xC 10. "CC2DE,Capture/Compare 2 DMA request" "0,1" bitfld.long 0xC 9. "CC1DE,Capture/Compare 1 DMA request" "0,1" bitfld.long 0xC 8. "UDE,Update DMA request enable" "0,1" bitfld.long 0xC 6. "TIE,Trigger interrupt enable" "0,1" bitfld.long 0xC 4. "CC4IE,Capture/Compare 4 interrupt" "0,1" bitfld.long 0xC 3. "CC3IE,Capture/Compare 3 interrupt" "0,1" bitfld.long 0xC 2. "CC2IE,Capture/Compare 2 interrupt" "0,1" newline bitfld.long 0xC 1. "CC1IE,Capture/Compare 1 interrupt" "0,1" bitfld.long 0xC 0. "UIE,Update interrupt enable" "0,1" line.long 0x10 "SR,status register" bitfld.long 0x10 12. "CC4OF,Capture/Compare 4 overcapture" "0,1" bitfld.long 0x10 11. "CC3OF,Capture/Compare 3 overcapture" "0,1" bitfld.long 0x10 10. "CC2OF,Capture/compare 2 overcapture" "0,1" bitfld.long 0x10 9. "CC1OF,Capture/Compare 1 overcapture" "0,1" bitfld.long 0x10 6. "TIF,Trigger interrupt flag" "0,1" bitfld.long 0x10 4. "CC4IF,Capture/Compare 4 interrupt" "0,1" bitfld.long 0x10 3. "CC3IF,Capture/Compare 3 interrupt" "0,1" bitfld.long 0x10 2. "CC2IF,Capture/Compare 2 interrupt" "0,1" bitfld.long 0x10 1. "CC1IF,Capture/compare 1 interrupt" "0,1" bitfld.long 0x10 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 6. "TG,Trigger generation" "0,1" bitfld.long 0x0 4. "CC4G,Capture/compare 4" "0,1" bitfld.long 0x0 3. "CC3G,Capture/compare 3" "0,1" bitfld.long 0x0 2. "CC2G,Capture/compare 2" "0,1" bitfld.long 0x0 1. "CC1G,Capture/compare 1" "0,1" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x18++0x3 line.long 0x0 "CCMR1_Output,capture/compare mode register 1 (output" bitfld.long 0x0 15. "OC2CE,Output compare 2 clear" "0,1" bitfld.long 0x0 12.--14. "OC2M,Output compare 2 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 11. "OC2PE,Output compare 2 preload" "0,1" bitfld.long 0x0 10. "OC2FE,Output compare 2 fast" "0,1" bitfld.long 0x0 8.--9. "CC2S,Capture/Compare 2" "0,1,2,3" bitfld.long 0x0 7. "OC1CE,Output compare 1 clear" "0,1" bitfld.long 0x0 4.--6. "OC1M,Output compare 1 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 3. "OC1PE,Output compare 1 preload" "0,1" bitfld.long 0x0 2. "OC1FE,Output compare 1 fast" "0,1" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x18++0x7 line.long 0x0 "CCMR1_Input,capture/compare mode register 1 (input" hexmask.long.byte 0x0 12.--15. 1. "IC2F,Input capture 2 filter" bitfld.long 0x0 10.--11. "IC2PSC,Input capture 2 prescaler" "0,1,2,3" bitfld.long 0x0 8.--9. "CC2S,Capture/compare 2" "0,1,2,3" hexmask.long.byte 0x0 4.--7. 1. "IC1F,Input capture 1 filter" bitfld.long 0x0 2.--3. "IC1PSC,Input capture 1 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" line.long 0x4 "CCMR2_Output,capture/compare mode register 2 (output" bitfld.long 0x4 15. "OC4CE,Output compare 4 clear" "0,1" bitfld.long 0x4 12.--14. "OC4M,Output compare 4 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x4 11. "OC4PE,Output compare 4 preload" "0,1" bitfld.long 0x4 10. "OC4FE,Output compare 4 fast" "0,1" bitfld.long 0x4 8.--9. "CC4S,Capture/Compare 4" "0,1,2,3" bitfld.long 0x4 7. "OC3CE,Output compare 3 clear" "0,1" bitfld.long 0x4 4.--6. "OC3M,Output compare 3 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x4 3. "OC3PE,Output compare 3 preload" "0,1" bitfld.long 0x4 2. "OC3FE,Output compare 3 fast" "0,1" bitfld.long 0x4 0.--1. "CC3S,Capture/Compare 3" "0,1,2,3" group.long 0x1C++0x13 line.long 0x0 "CCMR2_Input,capture/compare mode register 2 (input" hexmask.long.byte 0x0 12.--15. 1. "IC4F,Input capture 4 filter" bitfld.long 0x0 10.--11. "IC4PSC,Input capture 4 prescaler" "0,1,2,3" bitfld.long 0x0 8.--9. "CC4S,Capture/Compare 4" "0,1,2,3" hexmask.long.byte 0x0 4.--7. 1. "IC3F,Input capture 3 filter" bitfld.long 0x0 2.--3. "IC3PSC,Input capture 3 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC3S,Capture/Compare 3" "0,1,2,3" line.long 0x4 "CCER,capture/compare enable" bitfld.long 0x4 15. "CC4NP,Capture/Compare 4 output" "0,1" bitfld.long 0x4 13. "CC4P,Capture/Compare 3 output" "0,1" bitfld.long 0x4 12. "CC4E,Capture/Compare 4 output" "0,1" bitfld.long 0x4 11. "CC3NP,Capture/Compare 3 output" "0,1" bitfld.long 0x4 9. "CC3P,Capture/Compare 3 output" "0,1" bitfld.long 0x4 8. "CC3E,Capture/Compare 3 output" "0,1" bitfld.long 0x4 7. "CC2NP,Capture/Compare 2 output" "0,1" bitfld.long 0x4 5. "CC2P,Capture/Compare 2 output" "0,1" bitfld.long 0x4 4. "CC2E,Capture/Compare 2 output" "0,1" bitfld.long 0x4 3. "CC1NP,Capture/Compare 1 output" "0,1" bitfld.long 0x4 1. "CC1P,Capture/Compare 1 output" "0,1" newline bitfld.long 0x4 0. "CC1E,Capture/Compare 1 output" "0,1" line.long 0x8 "CNT,counter" hexmask.long.word 0x8 16.--31. 1. "CNT_H,High counter value (TIM2" hexmask.long.word 0x8 0.--15. 1. "CNT_L,Low counter value" line.long 0xC "PSC,prescaler" hexmask.long.word 0xC 0.--15. 1. "PSC,Prescaler value" line.long 0x10 "ARR,auto-reload register" hexmask.long.word 0x10 16.--31. 1. "ARR_H,High Auto-reload value (TIM2" hexmask.long.word 0x10 0.--15. 1. "ARR_L,Low Auto-reload value" group.long 0x34++0xF line.long 0x0 "CCR1,capture/compare register 1" hexmask.long.word 0x0 16.--31. 1. "CCR1_H,High Capture/Compare 1 value (TIM2" hexmask.long.word 0x0 0.--15. 1. "CCR1_L,Low Capture/Compare 1" line.long 0x4 "CCR2,capture/compare register 2" hexmask.long.word 0x4 16.--31. 1. "CCR2_H,High Capture/Compare 2 value (TIM2" hexmask.long.word 0x4 0.--15. 1. "CCR2_L,Low Capture/Compare 2" line.long 0x8 "CCR3,capture/compare register 3" hexmask.long.word 0x8 16.--31. 1. "CCR3_H,High Capture/Compare value (TIM2" hexmask.long.word 0x8 0.--15. 1. "CCR3_L,Low Capture/Compare value" line.long 0xC "CCR4,capture/compare register 4" hexmask.long.word 0xC 16.--31. 1. "CCR4_H,High Capture/Compare value (TIM2" hexmask.long.word 0xC 0.--15. 1. "CCR4_L,Low Capture/Compare value" group.long 0x48++0x7 line.long 0x0 "DCR,DMA control register" hexmask.long.byte 0x0 8.--12. 1. "DBL,DMA burst length" hexmask.long.byte 0x0 0.--4. 1. "DBA,DMA base address" line.long 0x4 "DMAR,DMA address for full transfer" hexmask.long.word 0x4 0.--15. 1. "DMAR,DMA register for burst" tree.end tree "TIM6 (Basic Timer)" base ad:0x40001000 group.long 0x0++0x7 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 3. "OPM,One-pulse mode" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 4.--6. "MMS,Master mode selection" "0,1,2,3,4,5,6,7" group.long 0xC++0x7 line.long 0x0 "DIER,DMA/Interrupt enable register" bitfld.long 0x0 8. "UDE,Update DMA request enable" "0,1" bitfld.long 0x0 0. "UIE,Update interrupt enable" "0,1" line.long 0x4 "SR,status register" bitfld.long 0x4 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x24++0xB line.long 0x0 "CNT,counter" hexmask.long.word 0x0 0.--15. 1. "CNT,Low counter value" line.long 0x4 "PSC,prescaler" hexmask.long.word 0x4 0.--15. 1. "PSC,Prescaler value" line.long 0x8 "ARR,auto-reload register" hexmask.long.word 0x8 0.--15. 1. "ARR,Low Auto-reload value" tree.end tree "TIM14 (General-Purpose Timer)" base ad:0x40002000 group.long 0x0++0x3 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 8.--9. "CKD,Clock division" "0,1,2,3" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" group.long 0xC++0x7 line.long 0x0 "DIER,DMA/Interrupt enable register" bitfld.long 0x0 1. "CC1IE,Capture/Compare 1 interrupt" "0,1" bitfld.long 0x0 0. "UIE,Update interrupt enable" "0,1" line.long 0x4 "SR,status register" bitfld.long 0x4 9. "CC1OF,Capture/Compare 1 overcapture" "0,1" bitfld.long 0x4 1. "CC1IF,Capture/compare 1 interrupt" "0,1" bitfld.long 0x4 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 1. "CC1G,Capture/compare 1" "0,1" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x18++0x3 line.long 0x0 "CCMR1_Output,capture/compare mode register (output" bitfld.long 0x0 4.--6. "OC1M,Output Compare 1 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 3. "OC1PE,Output Compare 1 preload" "0,1" bitfld.long 0x0 2. "OC1FE,Output compare 1 fast" "0,1" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x18++0x3 line.long 0x0 "CCMR1_Input,capture/compare mode register (input" hexmask.long.byte 0x0 4.--7. 1. "IC1F,Input capture 1 filter" bitfld.long 0x0 2.--3. "IC1PSC,Input capture 1 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x20++0xF line.long 0x0 "CCER,capture/compare enable" bitfld.long 0x0 3. "CC1NP,Capture/Compare 1 output" "0,1" bitfld.long 0x0 1. "CC1P,Capture/Compare 1 output" "0,1" bitfld.long 0x0 0. "CC1E,Capture/Compare 1 output" "0,1" line.long 0x4 "CNT,counter" hexmask.long.word 0x4 0.--15. 1. "CNT,counter value" line.long 0x8 "PSC,prescaler" hexmask.long.word 0x8 0.--15. 1. "PSC,Prescaler value" line.long 0xC "ARR,auto-reload register" hexmask.long.word 0xC 0.--15. 1. "ARR,Auto-reload value" group.long 0x34++0x3 line.long 0x0 "CCR1,capture/compare register 1" hexmask.long.word 0x0 0.--15. 1. "CCR1,Capture/Compare 1 value" group.long 0x50++0x3 line.long 0x0 "OR,option register" bitfld.long 0x0 0.--1. "RMP,Timer input 1 remap" "0,1,2,3" tree.end tree "TIM15 (General-Purpose Timer)" base ad:0x40014000 group.long 0x0++0x13 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 8.--9. "CKD,Clock division" "0,1,2,3" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 3. "OPM,One-pulse mode" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 10. "OIS2,Output Idle state 2" "0,1" bitfld.long 0x4 9. "OIS1N,Output Idle state 1" "0,1" bitfld.long 0x4 8. "OIS1,Output Idle state 1" "0,1" bitfld.long 0x4 4.--6. "MMS,Master mode selection" "0,1,2,3,4,5,6,7" bitfld.long 0x4 3. "CCDS,Capture/compare DMA" "0,1" bitfld.long 0x4 2. "CCUS,Capture/compare control update" "0,1" bitfld.long 0x4 0. "CCPC,Capture/compare preloaded" "0,1" line.long 0x8 "SMCR,slave mode control register" bitfld.long 0x8 7. "MSM,Master/Slave mode" "0,1" bitfld.long 0x8 4.--6. "TS,Trigger selection" "0,1,2,3,4,5,6,7" bitfld.long 0x8 0.--2. "SMS,Slave mode selection" "0,1,2,3,4,5,6,7" line.long 0xC "DIER,DMA/Interrupt enable register" bitfld.long 0xC 14. "TDE,Trigger DMA request enable" "0,1" bitfld.long 0xC 10. "CC2DE,Capture/Compare 2 DMA request" "0,1" bitfld.long 0xC 9. "CC1DE,Capture/Compare 1 DMA request" "0,1" bitfld.long 0xC 8. "UDE,Update DMA request enable" "0,1" bitfld.long 0xC 7. "BIE,Break interrupt enable" "0,1" bitfld.long 0xC 6. "TIE,Trigger interrupt enable" "0,1" bitfld.long 0xC 5. "COMIE,COM interrupt enable" "0,1" bitfld.long 0xC 2. "CC2IE,Capture/Compare 2 interrupt" "0,1" bitfld.long 0xC 1. "CC1IE,Capture/Compare 1 interrupt" "0,1" bitfld.long 0xC 0. "UIE,Update interrupt enable" "0,1" line.long 0x10 "SR,status register" bitfld.long 0x10 10. "CC2OF,Capture/compare 2 overcapture" "0,1" bitfld.long 0x10 9. "CC1OF,Capture/Compare 1 overcapture" "0,1" bitfld.long 0x10 7. "BIF,Break interrupt flag" "0,1" bitfld.long 0x10 6. "TIF,Trigger interrupt flag" "0,1" bitfld.long 0x10 5. "COMIF,COM interrupt flag" "0,1" bitfld.long 0x10 2. "CC2IF,Capture/Compare 2 interrupt" "0,1" bitfld.long 0x10 1. "CC1IF,Capture/compare 1 interrupt" "0,1" bitfld.long 0x10 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 7. "BG,Break generation" "0,1" bitfld.long 0x0 6. "TG,Trigger generation" "0,1" bitfld.long 0x0 5. "COMG,Capture/Compare control update" "0,1" bitfld.long 0x0 2. "CC2G,Capture/compare 2" "0,1" bitfld.long 0x0 1. "CC1G,Capture/compare 1" "0,1" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x18++0x3 line.long 0x0 "CCMR1_Output,capture/compare mode register (output" bitfld.long 0x0 12.--14. "OC2M,Output Compare 2 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 11. "OC2PE,Output Compare 2 preload" "0,1" bitfld.long 0x0 10. "OC2FE,Output Compare 2 fast" "0,1" bitfld.long 0x0 8.--9. "CC2S,Capture/Compare 2" "0,1,2,3" bitfld.long 0x0 4.--6. "OC1M,Output Compare 1 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 3. "OC1PE,Output Compare 1 preload" "0,1" bitfld.long 0x0 2. "OC1FE,Output Compare 1 fast" "0,1" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x18++0x3 line.long 0x0 "CCMR1_Input,capture/compare mode register 1 (input" hexmask.long.byte 0x0 12.--15. 1. "IC2F,Input capture 2 filter" bitfld.long 0x0 10.--11. "IC2PSC,Input capture 2 prescaler" "0,1,2,3" bitfld.long 0x0 8.--9. "CC2S,Capture/Compare 2" "0,1,2,3" hexmask.long.byte 0x0 4.--7. 1. "IC1F,Input capture 1 filter" bitfld.long 0x0 2.--3. "IC1PSC,Input capture 1 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x20++0x1B line.long 0x0 "CCER,capture/compare enable" bitfld.long 0x0 7. "CC2NP,Capture/Compare 2 output" "0,1" bitfld.long 0x0 5. "CC2P,Capture/Compare 2 output" "0,1" bitfld.long 0x0 4. "CC2E,Capture/Compare 2 output" "0,1" bitfld.long 0x0 3. "CC1NP,Capture/Compare 1 output" "0,1" bitfld.long 0x0 2. "CC1NE,Capture/Compare 1 complementary output" "0,1" bitfld.long 0x0 1. "CC1P,Capture/Compare 1 output" "0,1" bitfld.long 0x0 0. "CC1E,Capture/Compare 1 output" "0,1" line.long 0x4 "CNT,counter" hexmask.long.word 0x4 0.--15. 1. "CNT,counter value" line.long 0x8 "PSC,prescaler" hexmask.long.word 0x8 0.--15. 1. "PSC,Prescaler value" line.long 0xC "ARR,auto-reload register" hexmask.long.word 0xC 0.--15. 1. "ARR,Auto-reload value" line.long 0x10 "RCR,repetition counter register" hexmask.long.byte 0x10 0.--7. 1. "REP,Repetition counter value" line.long 0x14 "CCR1,capture/compare register 1" hexmask.long.word 0x14 0.--15. 1. "CCR1,Capture/Compare 1 value" line.long 0x18 "CCR2,capture/compare register 2" hexmask.long.word 0x18 0.--15. 1. "CCR2,Capture/Compare 2 value" group.long 0x44++0xB line.long 0x0 "BDTR,break and dead-time register" bitfld.long 0x0 15. "MOE,Main output enable" "0,1" bitfld.long 0x0 14. "AOE,Automatic output enable" "0,1" bitfld.long 0x0 13. "BKP,Break polarity" "0,1" bitfld.long 0x0 12. "BKE,Break enable" "0,1" bitfld.long 0x0 11. "OSSR,Off-state selection for Run" "0,1" bitfld.long 0x0 10. "OSSI,Off-state selection for Idle" "0,1" bitfld.long 0x0 8.--9. "LOCK,Lock configuration" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DTG,Dead-time generator setup" line.long 0x4 "DCR,DMA control register" hexmask.long.byte 0x4 8.--12. 1. "DBL,DMA burst length" hexmask.long.byte 0x4 0.--4. 1. "DBA,DMA base address" line.long 0x8 "DMAR,DMA address for full transfer" hexmask.long.word 0x8 0.--15. 1. "DMAB,DMA register for burst" tree.end tree "TIM16 (General-Purpose Timer)" base ad:0x40014400 group.long 0x0++0x7 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 8.--9. "CKD,Clock division" "0,1,2,3" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 3. "OPM,One-pulse mode" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 9. "OIS1N,Output Idle state 1" "0,1" bitfld.long 0x4 8. "OIS1,Output Idle state 1" "0,1" bitfld.long 0x4 3. "CCDS,Capture/compare DMA" "0,1" bitfld.long 0x4 2. "CCUS,Capture/compare control update" "0,1" bitfld.long 0x4 0. "CCPC,Capture/compare preloaded" "0,1" group.long 0xC++0x7 line.long 0x0 "DIER,DMA/Interrupt enable register" bitfld.long 0x0 14. "TDE,Trigger DMA request enable" "0,1" bitfld.long 0x0 9. "CC1DE,Capture/Compare 1 DMA request" "0,1" bitfld.long 0x0 8. "UDE,Update DMA request enable" "0,1" bitfld.long 0x0 7. "BIE,Break interrupt enable" "0,1" bitfld.long 0x0 6. "TIE,Trigger interrupt enable" "0,1" bitfld.long 0x0 5. "COMIE,COM interrupt enable" "0,1" bitfld.long 0x0 1. "CC1IE,Capture/Compare 1 interrupt" "0,1" bitfld.long 0x0 0. "UIE,Update interrupt enable" "0,1" line.long 0x4 "SR,status register" bitfld.long 0x4 9. "CC1OF,Capture/Compare 1 overcapture" "0,1" bitfld.long 0x4 7. "BIF,Break interrupt flag" "0,1" bitfld.long 0x4 6. "TIF,Trigger interrupt flag" "0,1" bitfld.long 0x4 5. "COMIF,COM interrupt flag" "0,1" bitfld.long 0x4 1. "CC1IF,Capture/compare 1 interrupt" "0,1" bitfld.long 0x4 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 7. "BG,Break generation" "0,1" bitfld.long 0x0 6. "TG,Trigger generation" "0,1" bitfld.long 0x0 5. "COMG,Capture/Compare control update" "0,1" bitfld.long 0x0 1. "CC1G,Capture/compare 1" "0,1" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x18++0x3 line.long 0x0 "CCMR1_Output,capture/compare mode register (output" bitfld.long 0x0 4.--6. "OC1M,Output Compare 1 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 3. "OC1PE,Output Compare 1 preload" "0,1" bitfld.long 0x0 2. "OC1FE,Output Compare 1 fast" "0,1" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x18++0x3 line.long 0x0 "CCMR1_Input,capture/compare mode register 1 (input" hexmask.long.byte 0x0 4.--7. 1. "IC1F,Input capture 1 filter" bitfld.long 0x0 2.--3. "IC1PSC,Input capture 1 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x20++0x17 line.long 0x0 "CCER,capture/compare enable" bitfld.long 0x0 3. "CC1NP,Capture/Compare 1 output" "0,1" bitfld.long 0x0 2. "CC1NE,Capture/Compare 1 complementary output" "0,1" bitfld.long 0x0 1. "CC1P,Capture/Compare 1 output" "0,1" bitfld.long 0x0 0. "CC1E,Capture/Compare 1 output" "0,1" line.long 0x4 "CNT,counter" hexmask.long.word 0x4 0.--15. 1. "CNT,counter value" line.long 0x8 "PSC,prescaler" hexmask.long.word 0x8 0.--15. 1. "PSC,Prescaler value" line.long 0xC "ARR,auto-reload register" hexmask.long.word 0xC 0.--15. 1. "ARR,Auto-reload value" line.long 0x10 "RCR,repetition counter register" hexmask.long.byte 0x10 0.--7. 1. "REP,Repetition counter value" line.long 0x14 "CCR1,capture/compare register 1" hexmask.long.word 0x14 0.--15. 1. "CCR1,Capture/Compare 1 value" group.long 0x44++0xB line.long 0x0 "BDTR,break and dead-time register" bitfld.long 0x0 15. "MOE,Main output enable" "0,1" bitfld.long 0x0 14. "AOE,Automatic output enable" "0,1" bitfld.long 0x0 13. "BKP,Break polarity" "0,1" bitfld.long 0x0 12. "BKE,Break enable" "0,1" bitfld.long 0x0 11. "OSSR,Off-state selection for Run" "0,1" bitfld.long 0x0 10. "OSSI,Off-state selection for Idle" "0,1" bitfld.long 0x0 8.--9. "LOCK,Lock configuration" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DTG,Dead-time generator setup" line.long 0x4 "DCR,DMA control register" hexmask.long.byte 0x4 8.--12. 1. "DBL,DMA burst length" hexmask.long.byte 0x4 0.--4. 1. "DBA,DMA base address" line.long 0x8 "DMAR,DMA address for full transfer" hexmask.long.word 0x8 0.--15. 1. "DMAB,DMA register for burst" tree.end tree "TIM17 (General-Purpose Timer)" base ad:0x40014800 group.long 0x0++0x7 line.long 0x0 "CR1,control register 1" bitfld.long 0x0 8.--9. "CKD,Clock division" "0,1,2,3" bitfld.long 0x0 7. "ARPE,Auto-reload preload enable" "0,1" bitfld.long 0x0 3. "OPM,One-pulse mode" "0,1" bitfld.long 0x0 2. "URS,Update request source" "0,1" bitfld.long 0x0 1. "UDIS,Update disable" "0,1" bitfld.long 0x0 0. "CEN,Counter enable" "0,1" line.long 0x4 "CR2,control register 2" bitfld.long 0x4 9. "OIS1N,Output Idle state 1" "0,1" bitfld.long 0x4 8. "OIS1,Output Idle state 1" "0,1" bitfld.long 0x4 3. "CCDS,Capture/compare DMA" "0,1" bitfld.long 0x4 2. "CCUS,Capture/compare control update" "0,1" bitfld.long 0x4 0. "CCPC,Capture/compare preloaded" "0,1" group.long 0xC++0x7 line.long 0x0 "DIER,DMA/Interrupt enable register" bitfld.long 0x0 14. "TDE,Trigger DMA request enable" "0,1" bitfld.long 0x0 9. "CC1DE,Capture/Compare 1 DMA request" "0,1" bitfld.long 0x0 8. "UDE,Update DMA request enable" "0,1" bitfld.long 0x0 7. "BIE,Break interrupt enable" "0,1" bitfld.long 0x0 6. "TIE,Trigger interrupt enable" "0,1" bitfld.long 0x0 5. "COMIE,COM interrupt enable" "0,1" bitfld.long 0x0 1. "CC1IE,Capture/Compare 1 interrupt" "0,1" bitfld.long 0x0 0. "UIE,Update interrupt enable" "0,1" line.long 0x4 "SR,status register" bitfld.long 0x4 9. "CC1OF,Capture/Compare 1 overcapture" "0,1" bitfld.long 0x4 7. "BIF,Break interrupt flag" "0,1" bitfld.long 0x4 6. "TIF,Trigger interrupt flag" "0,1" bitfld.long 0x4 5. "COMIF,COM interrupt flag" "0,1" bitfld.long 0x4 1. "CC1IF,Capture/compare 1 interrupt" "0,1" bitfld.long 0x4 0. "UIF,Update interrupt flag" "0,1" wgroup.long 0x14++0x3 line.long 0x0 "EGR,event generation register" bitfld.long 0x0 7. "BG,Break generation" "0,1" bitfld.long 0x0 6. "TG,Trigger generation" "0,1" bitfld.long 0x0 5. "COMG,Capture/Compare control update" "0,1" bitfld.long 0x0 1. "CC1G,Capture/compare 1" "0,1" bitfld.long 0x0 0. "UG,Update generation" "0,1" group.long 0x18++0x3 line.long 0x0 "CCMR1_Output,capture/compare mode register (output" bitfld.long 0x0 4.--6. "OC1M,Output Compare 1 mode" "0,1,2,3,4,5,6,7" bitfld.long 0x0 3. "OC1PE,Output Compare 1 preload" "0,1" bitfld.long 0x0 2. "OC1FE,Output Compare 1 fast" "0,1" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x18++0x3 line.long 0x0 "CCMR1_Input,capture/compare mode register 1 (input" hexmask.long.byte 0x0 4.--7. 1. "IC1F,Input capture 1 filter" bitfld.long 0x0 2.--3. "IC1PSC,Input capture 1 prescaler" "0,1,2,3" bitfld.long 0x0 0.--1. "CC1S,Capture/Compare 1" "0,1,2,3" group.long 0x20++0x17 line.long 0x0 "CCER,capture/compare enable" bitfld.long 0x0 3. "CC1NP,Capture/Compare 1 output" "0,1" bitfld.long 0x0 2. "CC1NE,Capture/Compare 1 complementary output" "0,1" bitfld.long 0x0 1. "CC1P,Capture/Compare 1 output" "0,1" bitfld.long 0x0 0. "CC1E,Capture/Compare 1 output" "0,1" line.long 0x4 "CNT,counter" hexmask.long.word 0x4 0.--15. 1. "CNT,counter value" line.long 0x8 "PSC,prescaler" hexmask.long.word 0x8 0.--15. 1. "PSC,Prescaler value" line.long 0xC "ARR,auto-reload register" hexmask.long.word 0xC 0.--15. 1. "ARR,Auto-reload value" line.long 0x10 "RCR,repetition counter register" hexmask.long.byte 0x10 0.--7. 1. "REP,Repetition counter value" line.long 0x14 "CCR1,capture/compare register 1" hexmask.long.word 0x14 0.--15. 1. "CCR1,Capture/Compare 1 value" group.long 0x44++0xB line.long 0x0 "BDTR,break and dead-time register" bitfld.long 0x0 15. "MOE,Main output enable" "0,1" bitfld.long 0x0 14. "AOE,Automatic output enable" "0,1" bitfld.long 0x0 13. "BKP,Break polarity" "0,1" bitfld.long 0x0 12. "BKE,Break enable" "0,1" bitfld.long 0x0 11. "OSSR,Off-state selection for Run" "0,1" bitfld.long 0x0 10. "OSSI,Off-state selection for Idle" "0,1" bitfld.long 0x0 8.--9. "LOCK,Lock configuration" "0,1,2,3" hexmask.long.byte 0x0 0.--7. 1. "DTG,Dead-time generator setup" line.long 0x4 "DCR,DMA control register" hexmask.long.byte 0x4 8.--12. 1. "DBL,DMA burst length" hexmask.long.byte 0x4 0.--4. 1. "DBA,DMA base address" line.long 0x8 "DMAR,DMA address for full transfer" hexmask.long.word 0x8 0.--15. 1. "DMAB,DMA register for burst" tree.end tree.end tree "TSC (Touch Sensing Controller)" base ad:0x40024000 group.long 0x0++0x3 line.long 0x0 "CR,control register" sif (cpuis("FT32F072?*")) hexmask.long.byte 0x0 28.--31. 1. "CTPH,Charge transfer pulse high" endif sif (cpuis("FT32F0??*")) bitfld.long 0x0 27.--28. "LDO_PWR_SEL,Charge transfer pulse high" "0,1,2,3" bitfld.long 0x0 26. "G3_CAP_EN,Charge transfer pulse low" "0,1" bitfld.long 0x0 25. "G2_CAP_EN,Spread spectrum deviation" "0,1" bitfld.long 0x0 24. "G1_CAP_EN,Spread spectrum enable" "0,1" hexmask.long.byte 0x0 16.--23. 1. "G3_KEY_EN,Spread spectrum prescaler" hexmask.long.byte 0x0 8.--15. 1. "G2_KEY_EN,pulse generator prescaler" hexmask.long.byte 0x0 0.--7. 1. "G1_KEY_EN,Max count value" newline endif sif (cpuis("FT32F072?*")) hexmask.long.byte 0x0 24.--27. 1. "CTPL,Charge transfer pulse low" endif sif (cpuis("FT32F072?*")) hexmask.long.byte 0x0 17.--23. 1. "SSD,Spread spectrum deviation" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 16. "SSE,Spread spectrum enable" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 15. "SSPSC,Spread spectrum prescaler" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 12.--14. "PGPSC,pulse generator prescaler" "0,1,2,3,4,5,6,7" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 5.--7. "MCV,Max count value" "0,1,2,3,4,5,6,7" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 4. "IODEF,I/O Default mode" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 3. "SYNCPOL,Synchronization pin" "0,1" newline endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 2. "AM,Acquisition mode" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 1. "START,Start a new acquisition" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 0. "TSCE,Touch sensing controller" "0,1" endif sif (cpuis("FT32F0??*")) group.long 0x4++0x3 line.long 0x0 "CFGR,TSC configuration register" bitfld.long 0x0 24. "HW_MOD_SEL,Max count error interrupt" "0,1" bitfld.long 0x0 19.--20. "G3_LDO_MOD_SEL,End of acquisition interrupt" "0,1,2,3" newline bitfld.long 0x0 18. "G3_CG_MOD,End of acquisition interrupt" "0,1" bitfld.long 0x0 17. "G3_PWM_SEL,End of acquisition interrupt" "0,1" newline bitfld.long 0x0 16. "G3_PWM_EN,End of acquisition interrupt" "0,1" bitfld.long 0x0 11.--12. "G2_LDO_MOD_SEL,End of acquisition interrupt" "0,1,2,3" newline bitfld.long 0x0 10. "G2_CG_MOD,End of acquisition interrupt" "0,1" bitfld.long 0x0 9. "G2_PWM_SEL,End of acquisition interrupt" "0,1" newline bitfld.long 0x0 8. "G2_PWM_EN,End of acquisition interrupt" "0,1" bitfld.long 0x0 3.--4. "G1_LDO_MOD_SEL,End of acquisition interrupt" "0,1,2,3" newline bitfld.long 0x0 2. "G1_CG_MOD,End of acquisition interrupt" "0,1" bitfld.long 0x0 1. "G1_PWM_SEL,End of acquisition interrupt" "0,1" newline bitfld.long 0x0 0. "G1_PWM_EN,End of acquisition interrupt" "0,1" endif sif (cpuis("FT32F072?*")) group.long 0x4++0xF line.long 0x0 "IER,interrupt enable register" bitfld.long 0x0 1. "MCEIE,Max count error interrupt" "0,1" bitfld.long 0x0 0. "EOAIE,End of acquisition interrupt" "0,1" line.long 0x4 "ICR,interrupt clear register" bitfld.long 0x4 1. "MCEIC,Max count error interrupt" "0,1" bitfld.long 0x4 0. "EOAIC,End of acquisition interrupt" "0,1" line.long 0x8 "ISR,interrupt status register" bitfld.long 0x8 1. "MCEF,Max count error flag" "0,1" bitfld.long 0x8 0. "EOAF,End of acquisition flag" "0,1" line.long 0xC "IOHCR,I/O hysteresis control" bitfld.long 0xC 23. "G6_IO4,G6_IO4 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 22. "G6_IO3,G6_IO3 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 21. "G6_IO2,G6_IO2 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 20. "G6_IO1,G6_IO1 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 19. "G5_IO4,G5_IO4 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 18. "G5_IO3,G5_IO3 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 17. "G5_IO2,G5_IO2 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 16. "G5_IO1,G5_IO1 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 15. "G4_IO4,G4_IO4 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 14. "G4_IO3,G4_IO3 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 13. "G4_IO2,G4_IO2 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 12. "G4_IO1,G4_IO1 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 11. "G3_IO4,G3_IO4 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 10. "G3_IO3,G3_IO3 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 9. "G3_IO2,G3_IO2 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 8. "G3_IO1,G3_IO1 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 7. "G2_IO4,G2_IO4 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 6. "G2_IO3,G2_IO3 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 5. "G2_IO2,G2_IO2 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 4. "G2_IO1,G2_IO1 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 3. "G1_IO4,G1_IO4 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 2. "G1_IO3,G1_IO3 Schmitt trigger hysteresis" "0,1" newline bitfld.long 0xC 1. "G1_IO2,G1_IO2 Schmitt trigger hysteresis" "0,1" bitfld.long 0xC 0. "G1_IO1,G1_IO1 Schmitt trigger hysteresis" "0,1" group.long 0x18++0x3 line.long 0x0 "IOASCR,I/O analog switch control" bitfld.long 0x0 23. "G6_IO4,G6_IO4 analog switch" "0,1" bitfld.long 0x0 22. "G6_IO3,G6_IO3 analog switch" "0,1" newline bitfld.long 0x0 21. "G6_IO2,G6_IO2 analog switch" "0,1" bitfld.long 0x0 20. "G6_IO1,G6_IO1 analog switch" "0,1" newline bitfld.long 0x0 19. "G5_IO4,G5_IO4 analog switch" "0,1" bitfld.long 0x0 18. "G5_IO3,G5_IO3 analog switch" "0,1" newline bitfld.long 0x0 17. "G5_IO2,G5_IO2 analog switch" "0,1" bitfld.long 0x0 16. "G5_IO1,G5_IO1 analog switch" "0,1" newline bitfld.long 0x0 15. "G4_IO4,G4_IO4 analog switch" "0,1" bitfld.long 0x0 14. "G4_IO3,G4_IO3 analog switch" "0,1" newline bitfld.long 0x0 13. "G4_IO2,G4_IO2 analog switch" "0,1" bitfld.long 0x0 12. "G4_IO1,G4_IO1 analog switch" "0,1" newline bitfld.long 0x0 11. "G3_IO4,G3_IO4 analog switch" "0,1" bitfld.long 0x0 10. "G3_IO3,G3_IO3 analog switch" "0,1" newline bitfld.long 0x0 9. "G3_IO2,G3_IO2 analog switch" "0,1" bitfld.long 0x0 8. "G3_IO1,G3_IO1 analog switch" "0,1" newline bitfld.long 0x0 7. "G2_IO4,G2_IO4 analog switch" "0,1" bitfld.long 0x0 6. "G2_IO3,G2_IO3 analog switch" "0,1" newline bitfld.long 0x0 5. "G2_IO2,G2_IO2 analog switch" "0,1" bitfld.long 0x0 4. "G2_IO1,G2_IO1 analog switch" "0,1" newline bitfld.long 0x0 3. "G1_IO4,G1_IO4 analog switch" "0,1" bitfld.long 0x0 2. "G1_IO3,G1_IO3 analog switch" "0,1" newline bitfld.long 0x0 1. "G1_IO2,G1_IO2 analog switch" "0,1" bitfld.long 0x0 0. "G1_IO1,G1_IO1 analog switch" "0,1" group.long 0x20++0x3 line.long 0x0 "IOSCR,I/O sampling control register" bitfld.long 0x0 23. "G6_IO4,G6_IO4 sampling mode" "0,1" bitfld.long 0x0 22. "G6_IO3,G6_IO3 sampling mode" "0,1" newline bitfld.long 0x0 21. "G6_IO2,G6_IO2 sampling mode" "0,1" bitfld.long 0x0 20. "G6_IO1,G6_IO1 sampling mode" "0,1" newline bitfld.long 0x0 19. "G5_IO4,G5_IO4 sampling mode" "0,1" bitfld.long 0x0 18. "G5_IO3,G5_IO3 sampling mode" "0,1" newline bitfld.long 0x0 17. "G5_IO2,G5_IO2 sampling mode" "0,1" bitfld.long 0x0 16. "G5_IO1,G5_IO1 sampling mode" "0,1" newline bitfld.long 0x0 15. "G4_IO4,G4_IO4 sampling mode" "0,1" bitfld.long 0x0 14. "G4_IO3,G4_IO3 sampling mode" "0,1" newline bitfld.long 0x0 13. "G4_IO2,G4_IO2 sampling mode" "0,1" bitfld.long 0x0 12. "G4_IO1,G4_IO1 sampling mode" "0,1" newline bitfld.long 0x0 11. "G3_IO4,G3_IO4 sampling mode" "0,1" bitfld.long 0x0 10. "G3_IO3,G3_IO3 sampling mode" "0,1" newline bitfld.long 0x0 9. "G3_IO2,G3_IO2 sampling mode" "0,1" bitfld.long 0x0 8. "G3_IO1,G3_IO1 sampling mode" "0,1" newline bitfld.long 0x0 7. "G2_IO4,G2_IO4 sampling mode" "0,1" bitfld.long 0x0 6. "G2_IO3,G2_IO3 sampling mode" "0,1" newline bitfld.long 0x0 5. "G2_IO2,G2_IO2 sampling mode" "0,1" bitfld.long 0x0 4. "G2_IO1,G2_IO1 sampling mode" "0,1" newline bitfld.long 0x0 3. "G1_IO4,G1_IO4 sampling mode" "0,1" bitfld.long 0x0 2. "G1_IO3,G1_IO3 sampling mode" "0,1" newline bitfld.long 0x0 1. "G1_IO2,G1_IO2 sampling mode" "0,1" bitfld.long 0x0 0. "G1_IO1,G1_IO1 sampling mode" "0,1" group.long 0x28++0x3 line.long 0x0 "IOCCR,I/O channel control register" bitfld.long 0x0 23. "G6_IO4,G6_IO4 channel mode" "0,1" bitfld.long 0x0 22. "G6_IO3,G6_IO3 channel mode" "0,1" newline bitfld.long 0x0 21. "G6_IO2,G6_IO2 channel mode" "0,1" bitfld.long 0x0 20. "G6_IO1,G6_IO1 channel mode" "0,1" newline bitfld.long 0x0 19. "G5_IO4,G5_IO4 channel mode" "0,1" bitfld.long 0x0 18. "G5_IO3,G5_IO3 channel mode" "0,1" newline bitfld.long 0x0 17. "G5_IO2,G5_IO2 channel mode" "0,1" bitfld.long 0x0 16. "G5_IO1,G5_IO1 channel mode" "0,1" newline bitfld.long 0x0 15. "G4_IO4,G4_IO4 channel mode" "0,1" bitfld.long 0x0 14. "G4_IO3,G4_IO3 channel mode" "0,1" newline bitfld.long 0x0 13. "G4_IO2,G4_IO2 channel mode" "0,1" bitfld.long 0x0 12. "G4_IO1,G4_IO1 channel mode" "0,1" newline bitfld.long 0x0 11. "G3_IO4,G3_IO4 channel mode" "0,1" bitfld.long 0x0 10. "G3_IO3,G3_IO3 channel mode" "0,1" newline bitfld.long 0x0 9. "G3_IO2,G3_IO2 channel mode" "0,1" bitfld.long 0x0 8. "G3_IO1,G3_IO1 channel mode" "0,1" newline bitfld.long 0x0 7. "G2_IO4,G2_IO4 channel mode" "0,1" bitfld.long 0x0 6. "G2_IO3,G2_IO3 channel mode" "0,1" newline bitfld.long 0x0 5. "G2_IO2,G2_IO2 channel mode" "0,1" bitfld.long 0x0 4. "G2_IO1,G2_IO1 channel mode" "0,1" newline bitfld.long 0x0 3. "G1_IO4,G1_IO4 channel mode" "0,1" bitfld.long 0x0 2. "G1_IO3,G1_IO3 channel mode" "0,1" newline bitfld.long 0x0 1. "G1_IO2,G1_IO2 channel mode" "0,1" bitfld.long 0x0 0. "G1_IO1,G1_IO1 channel mode" "0,1" group.long 0x30++0x3 line.long 0x0 "IOGCSR,I/O group control status" bitfld.long 0x0 23. "G8S,Analog I/O group x status" "0,1" bitfld.long 0x0 22. "G7S,Analog I/O group x status" "0,1" newline rbitfld.long 0x0 21. "G6S,Analog I/O group x status" "0,1" rbitfld.long 0x0 20. "G5S,Analog I/O group x status" "0,1" newline rbitfld.long 0x0 19. "G4S,Analog I/O group x status" "0,1" rbitfld.long 0x0 18. "G3S,Analog I/O group x status" "0,1" newline rbitfld.long 0x0 17. "G2S,Analog I/O group x status" "0,1" rbitfld.long 0x0 16. "G1S,Analog I/O group x status" "0,1" newline bitfld.long 0x0 7. "G8E,Analog I/O group x enable" "0,1" bitfld.long 0x0 6. "G7E,Analog I/O group x enable" "0,1" newline bitfld.long 0x0 5. "G6E,Analog I/O group x enable" "0,1" bitfld.long 0x0 4. "G5E,Analog I/O group x enable" "0,1" newline bitfld.long 0x0 3. "G4E,Analog I/O group x enable" "0,1" bitfld.long 0x0 2. "G3E,Analog I/O group x enable" "0,1" newline bitfld.long 0x0 1. "G2E,Analog I/O group x enable" "0,1" bitfld.long 0x0 0. "G1E,Analog I/O group x enable" "0,1" rgroup.long 0x34++0x17 line.long 0x0 "IOG1CR,I/O group x counter register" hexmask.long.word 0x0 0.--13. 1. "CNT,Counter value" line.long 0x4 "IOG2CR,I/O group x counter register" hexmask.long.word 0x4 0.--13. 1. "CNT,Counter value" line.long 0x8 "IOG3CR,I/O group x counter register" hexmask.long.word 0x8 0.--13. 1. "CNT,Counter value" line.long 0xC "IOG4CR,I/O group x counter register" hexmask.long.word 0xC 0.--13. 1. "CNT,Counter value" line.long 0x10 "IOG5CR,I/O group x counter register" hexmask.long.word 0x10 0.--13. 1. "CNT,Counter value" line.long 0x14 "IOG6CR,I/O group x counter register" hexmask.long.word 0x14 0.--13. 1. "CNT,Counter value" endif tree.end tree "USART (Universal Synchronous/Asynchronous Transceiver)" base ad:0x0 sif (cpuis("FT32F072?*")) tree "USART3" base ad:0x40004800 group.long 0x0++0x1B line.long 0x0 "CR1,Control register 1" bitfld.long 0x0 28. "M1,Word length" "0,1" bitfld.long 0x0 27. "EOBIE,End of Block interrupt" "0,1" bitfld.long 0x0 26. "RTOIE,Receiver timeout interrupt" "0,1" hexmask.long.byte 0x0 21.--25. 1. "DEAT,Driver Enable assertion" hexmask.long.byte 0x0 16.--20. 1. "DEDT,Driver Enable deassertion" bitfld.long 0x0 15. "OVER8,Oversampling mode" "0,1" bitfld.long 0x0 14. "CMIE,Character match interrupt" "0,1" bitfld.long 0x0 13. "MME,Mute mode enable" "0,1" newline bitfld.long 0x0 12. "M,Word length" "0,1" bitfld.long 0x0 11. "WAKE,Receiver wakeup method" "0,1" bitfld.long 0x0 10. "PCE,Parity control enable" "0,1" bitfld.long 0x0 9. "PS,Parity selection" "0,1" bitfld.long 0x0 8. "PEIE,PE interrupt enable" "0,1" bitfld.long 0x0 7. "TXEIE,interrupt enable" "0,1" bitfld.long 0x0 6. "TCIE,Transmission complete interrupt" "0,1" bitfld.long 0x0 5. "RXNEIE,RXNE interrupt enable" "0,1" newline bitfld.long 0x0 4. "IDLEIE,IDLE interrupt enable" "0,1" bitfld.long 0x0 3. "TE,Transmitter enable" "0,1" bitfld.long 0x0 2. "RE,Receiver enable" "0,1" bitfld.long 0x0 1. "UESM,USART enable in Stop mode" "0,1" bitfld.long 0x0 0. "UE,USART enable" "0,1" line.long 0x4 "CR2,Control register 2" hexmask.long.byte 0x4 28.--31. 1. "ADD4,Address of the USART node" hexmask.long.byte 0x4 24.--27. 1. "ADD0,Address of the USART node" bitfld.long 0x4 23. "RTOEN,Receiver timeout enable" "0,1" bitfld.long 0x4 21.--22. "ABRMOD,Auto baud rate mode" "0,1,2,3" bitfld.long 0x4 20. "ABREN,Auto baud rate enable" "0,1" bitfld.long 0x4 19. "MSBFIRST,Most significant bit first" "0,1" bitfld.long 0x4 18. "DATAINV,Binary data inversion" "0,1" bitfld.long 0x4 17. "TXINV,TX pin active level" "0,1" newline bitfld.long 0x4 16. "RXINV,RX pin active level" "0,1" bitfld.long 0x4 15. "SWAP,Swap TX/RX pins" "0,1" bitfld.long 0x4 14. "LINEN,LIN mode enable" "0,1" bitfld.long 0x4 12.--13. "STOP,STOP bits" "0,1,2,3" bitfld.long 0x4 11. "CLKEN,Clock enable" "0,1" bitfld.long 0x4 10. "CPOL,Clock polarity" "0,1" bitfld.long 0x4 9. "CPHA,Clock phase" "0,1" bitfld.long 0x4 8. "LBCL,Last bit clock pulse" "0,1" newline bitfld.long 0x4 6. "LBDIE,LIN break detection interrupt" "0,1" bitfld.long 0x4 5. "LBDL,LIN break detection length" "0,1" bitfld.long 0x4 4. "ADDM7,7-bit Address Detection/4-bit Address" "0,1" line.long 0x8 "CR3,Control register 3" bitfld.long 0x8 22. "WUFIE,Wakeup from Stop mode interrupt" "0,1" bitfld.long 0x8 20.--21. "WUS,Wakeup from Stop mode interrupt flag" "0,1,2,3" bitfld.long 0x8 17.--19. "SCARCNT,Smartcard auto-retry count" "0,1,2,3,4,5,6,7" bitfld.long 0x8 15. "DEP,Driver enable polarity" "0,1" bitfld.long 0x8 14. "DEM,Driver enable mode" "0,1" bitfld.long 0x8 13. "DDRE,DMA Disable on Reception" "0,1" bitfld.long 0x8 12. "OVRDIS,Overrun Disable" "0,1" bitfld.long 0x8 11. "ONEBIT,One sample bit method" "0,1" newline bitfld.long 0x8 10. "CTSIE,CTS interrupt enable" "0,1" bitfld.long 0x8 9. "CTSE,CTS enable" "0,1" bitfld.long 0x8 8. "RTSE,RTS enable" "0,1" bitfld.long 0x8 7. "DMAT,DMA enable transmitter" "0,1" bitfld.long 0x8 6. "DMAR,DMA enable receiver" "0,1" bitfld.long 0x8 5. "SCEN,Smartcard mode enable" "0,1" bitfld.long 0x8 4. "NACK,Smartcard NACK enable" "0,1" bitfld.long 0x8 3. "HDSEL,Half-duplex selection" "0,1" newline bitfld.long 0x8 2. "IRLP,IrDA low-power" "0,1" bitfld.long 0x8 1. "IREN,IrDA mode enable" "0,1" bitfld.long 0x8 0. "EIE,Error interrupt enable" "0,1" line.long 0xC "BRR,Baud rate register" hexmask.long.word 0xC 4.--15. 1. "DIV_Mantissa,mantissa of USARTDIV" hexmask.long.byte 0xC 0.--3. 1. "DIV_Fraction,fraction of USARTDIV" line.long 0x10 "GTPR,Guard time and prescaler" hexmask.long.byte 0x10 8.--15. 1. "GT,Guard time value" hexmask.long.byte 0x10 0.--7. 1. "PSC,Prescaler value" line.long 0x14 "RTOR,Receiver timeout register" hexmask.long.byte 0x14 24.--31. 1. "BLEN,Block Length" hexmask.long.tbyte 0x14 0.--23. 1. "RTO,Receiver timeout value" line.long 0x18 "RQR,Request register" bitfld.long 0x18 4. "TXFRQ,Transmit data flush" "0,1" bitfld.long 0x18 3. "RXFRQ,Receive data flush request" "0,1" bitfld.long 0x18 2. "MMRQ,Mute mode request" "0,1" bitfld.long 0x18 1. "SBKRQ,Send break request" "0,1" bitfld.long 0x18 0. "ABRRQ,Auto baud rate request" "0,1" rgroup.long 0x1C++0x3 line.long 0x0 "ISR,Interrupt & status" bitfld.long 0x0 22. "REACK,Receive enable acknowledge" "0,1" bitfld.long 0x0 21. "TEACK,Transmit enable acknowledge" "0,1" bitfld.long 0x0 20. "WUF,Wakeup from Stop mode flag" "0,1" bitfld.long 0x0 19. "RWU,Receiver wakeup from Mute" "0,1" bitfld.long 0x0 18. "SBKF,Send break flag" "0,1" bitfld.long 0x0 17. "CMF,character match flag" "0,1" bitfld.long 0x0 16. "BUSY,Busy flag" "0,1" bitfld.long 0x0 15. "ABRF,Auto baud rate flag" "0,1" newline bitfld.long 0x0 14. "ABRE,Auto baud rate error" "0,1" bitfld.long 0x0 12. "EOBF,End of block flag" "0,1" bitfld.long 0x0 11. "RTOF,Receiver timeout" "0,1" bitfld.long 0x0 10. "CTS,CTS flag" "0,1" bitfld.long 0x0 9. "CTSIF,CTS interrupt flag" "0,1" bitfld.long 0x0 8. "LBDF,LIN break detection flag" "0,1" bitfld.long 0x0 7. "TXE,Transmit data register" "0,1" bitfld.long 0x0 6. "TC,Transmission complete" "0,1" newline bitfld.long 0x0 5. "RXNE,Read data register not" "0,1" bitfld.long 0x0 4. "IDLE,Idle line detected" "0,1" bitfld.long 0x0 3. "ORE,Overrun error" "0,1" bitfld.long 0x0 2. "NF,Noise detected flag" "0,1" bitfld.long 0x0 1. "FE,Framing error" "0,1" bitfld.long 0x0 0. "PE,Parity error" "0,1" group.long 0x20++0x3 line.long 0x0 "ICR,Interrupt flag clear register" bitfld.long 0x0 20. "WUCF,Wakeup from Stop mode clear" "0,1" bitfld.long 0x0 17. "CMCF,Character match clear flag" "0,1" bitfld.long 0x0 12. "EOBCF,End of timeout clear flag" "0,1" bitfld.long 0x0 11. "RTOCF,Receiver timeout clear" "0,1" bitfld.long 0x0 9. "CTSCF,CTS clear flag" "0,1" bitfld.long 0x0 8. "LBDCF,LIN break detection clear" "0,1" bitfld.long 0x0 6. "TCCF,Transmission complete clear" "0,1" bitfld.long 0x0 4. "IDLECF,Idle line detected clear" "0,1" newline bitfld.long 0x0 3. "ORECF,Overrun error clear flag" "0,1" bitfld.long 0x0 2. "NCF,Noise detected clear flag" "0,1" bitfld.long 0x0 1. "FECF,Framing error clear flag" "0,1" bitfld.long 0x0 0. "PECF,Parity error clear flag" "0,1" rgroup.long 0x24++0x3 line.long 0x0 "RDR,Receive data register" hexmask.long.word 0x0 0.--8. 1. "RDR,Receive data value" group.long 0x28++0x3 line.long 0x0 "TDR,Transmit data register" hexmask.long.word 0x0 0.--8. 1. "TDR,Transmit data value" tree.end endif sif (cpuis("FT32F072?*")) tree "USART4" base ad:0x40004C00 group.long 0x0++0x1B line.long 0x0 "CR1,Control register 1" bitfld.long 0x0 28. "M1,Word length" "0,1" bitfld.long 0x0 27. "EOBIE,End of Block interrupt" "0,1" bitfld.long 0x0 26. "RTOIE,Receiver timeout interrupt" "0,1" hexmask.long.byte 0x0 21.--25. 1. "DEAT,Driver Enable assertion" hexmask.long.byte 0x0 16.--20. 1. "DEDT,Driver Enable deassertion" bitfld.long 0x0 15. "OVER8,Oversampling mode" "0,1" bitfld.long 0x0 14. "CMIE,Character match interrupt" "0,1" bitfld.long 0x0 13. "MME,Mute mode enable" "0,1" newline bitfld.long 0x0 12. "M,Word length" "0,1" bitfld.long 0x0 11. "WAKE,Receiver wakeup method" "0,1" bitfld.long 0x0 10. "PCE,Parity control enable" "0,1" bitfld.long 0x0 9. "PS,Parity selection" "0,1" bitfld.long 0x0 8. "PEIE,PE interrupt enable" "0,1" bitfld.long 0x0 7. "TXEIE,interrupt enable" "0,1" bitfld.long 0x0 6. "TCIE,Transmission complete interrupt" "0,1" bitfld.long 0x0 5. "RXNEIE,RXNE interrupt enable" "0,1" newline bitfld.long 0x0 4. "IDLEIE,IDLE interrupt enable" "0,1" bitfld.long 0x0 3. "TE,Transmitter enable" "0,1" bitfld.long 0x0 2. "RE,Receiver enable" "0,1" bitfld.long 0x0 1. "UESM,USART enable in Stop mode" "0,1" bitfld.long 0x0 0. "UE,USART enable" "0,1" line.long 0x4 "CR2,Control register 2" hexmask.long.byte 0x4 28.--31. 1. "ADD4,Address of the USART node" hexmask.long.byte 0x4 24.--27. 1. "ADD0,Address of the USART node" bitfld.long 0x4 23. "RTOEN,Receiver timeout enable" "0,1" bitfld.long 0x4 21.--22. "ABRMOD,Auto baud rate mode" "0,1,2,3" bitfld.long 0x4 20. "ABREN,Auto baud rate enable" "0,1" bitfld.long 0x4 19. "MSBFIRST,Most significant bit first" "0,1" bitfld.long 0x4 18. "DATAINV,Binary data inversion" "0,1" bitfld.long 0x4 17. "TXINV,TX pin active level" "0,1" newline bitfld.long 0x4 16. "RXINV,RX pin active level" "0,1" bitfld.long 0x4 15. "SWAP,Swap TX/RX pins" "0,1" bitfld.long 0x4 14. "LINEN,LIN mode enable" "0,1" bitfld.long 0x4 12.--13. "STOP,STOP bits" "0,1,2,3" bitfld.long 0x4 11. "CLKEN,Clock enable" "0,1" bitfld.long 0x4 10. "CPOL,Clock polarity" "0,1" bitfld.long 0x4 9. "CPHA,Clock phase" "0,1" bitfld.long 0x4 8. "LBCL,Last bit clock pulse" "0,1" newline bitfld.long 0x4 6. "LBDIE,LIN break detection interrupt" "0,1" bitfld.long 0x4 5. "LBDL,LIN break detection length" "0,1" bitfld.long 0x4 4. "ADDM7,7-bit Address Detection/4-bit Address" "0,1" line.long 0x8 "CR3,Control register 3" bitfld.long 0x8 22. "WUFIE,Wakeup from Stop mode interrupt" "0,1" bitfld.long 0x8 20.--21. "WUS,Wakeup from Stop mode interrupt flag" "0,1,2,3" bitfld.long 0x8 17.--19. "SCARCNT,Smartcard auto-retry count" "0,1,2,3,4,5,6,7" bitfld.long 0x8 15. "DEP,Driver enable polarity" "0,1" bitfld.long 0x8 14. "DEM,Driver enable mode" "0,1" bitfld.long 0x8 13. "DDRE,DMA Disable on Reception" "0,1" bitfld.long 0x8 12. "OVRDIS,Overrun Disable" "0,1" bitfld.long 0x8 11. "ONEBIT,One sample bit method" "0,1" newline bitfld.long 0x8 10. "CTSIE,CTS interrupt enable" "0,1" bitfld.long 0x8 9. "CTSE,CTS enable" "0,1" bitfld.long 0x8 8. "RTSE,RTS enable" "0,1" bitfld.long 0x8 7. "DMAT,DMA enable transmitter" "0,1" bitfld.long 0x8 6. "DMAR,DMA enable receiver" "0,1" bitfld.long 0x8 5. "SCEN,Smartcard mode enable" "0,1" bitfld.long 0x8 4. "NACK,Smartcard NACK enable" "0,1" bitfld.long 0x8 3. "HDSEL,Half-duplex selection" "0,1" newline bitfld.long 0x8 2. "IRLP,IrDA low-power" "0,1" bitfld.long 0x8 1. "IREN,IrDA mode enable" "0,1" bitfld.long 0x8 0. "EIE,Error interrupt enable" "0,1" line.long 0xC "BRR,Baud rate register" hexmask.long.word 0xC 4.--15. 1. "DIV_Mantissa,mantissa of USARTDIV" hexmask.long.byte 0xC 0.--3. 1. "DIV_Fraction,fraction of USARTDIV" line.long 0x10 "GTPR,Guard time and prescaler" hexmask.long.byte 0x10 8.--15. 1. "GT,Guard time value" hexmask.long.byte 0x10 0.--7. 1. "PSC,Prescaler value" line.long 0x14 "RTOR,Receiver timeout register" hexmask.long.byte 0x14 24.--31. 1. "BLEN,Block Length" hexmask.long.tbyte 0x14 0.--23. 1. "RTO,Receiver timeout value" line.long 0x18 "RQR,Request register" bitfld.long 0x18 4. "TXFRQ,Transmit data flush" "0,1" bitfld.long 0x18 3. "RXFRQ,Receive data flush request" "0,1" bitfld.long 0x18 2. "MMRQ,Mute mode request" "0,1" bitfld.long 0x18 1. "SBKRQ,Send break request" "0,1" bitfld.long 0x18 0. "ABRRQ,Auto baud rate request" "0,1" rgroup.long 0x1C++0x3 line.long 0x0 "ISR,Interrupt & status" bitfld.long 0x0 22. "REACK,Receive enable acknowledge" "0,1" bitfld.long 0x0 21. "TEACK,Transmit enable acknowledge" "0,1" bitfld.long 0x0 20. "WUF,Wakeup from Stop mode flag" "0,1" bitfld.long 0x0 19. "RWU,Receiver wakeup from Mute" "0,1" bitfld.long 0x0 18. "SBKF,Send break flag" "0,1" bitfld.long 0x0 17. "CMF,character match flag" "0,1" bitfld.long 0x0 16. "BUSY,Busy flag" "0,1" bitfld.long 0x0 15. "ABRF,Auto baud rate flag" "0,1" newline bitfld.long 0x0 14. "ABRE,Auto baud rate error" "0,1" bitfld.long 0x0 12. "EOBF,End of block flag" "0,1" bitfld.long 0x0 11. "RTOF,Receiver timeout" "0,1" bitfld.long 0x0 10. "CTS,CTS flag" "0,1" bitfld.long 0x0 9. "CTSIF,CTS interrupt flag" "0,1" bitfld.long 0x0 8. "LBDF,LIN break detection flag" "0,1" bitfld.long 0x0 7. "TXE,Transmit data register" "0,1" bitfld.long 0x0 6. "TC,Transmission complete" "0,1" newline bitfld.long 0x0 5. "RXNE,Read data register not" "0,1" bitfld.long 0x0 4. "IDLE,Idle line detected" "0,1" bitfld.long 0x0 3. "ORE,Overrun error" "0,1" bitfld.long 0x0 2. "NF,Noise detected flag" "0,1" bitfld.long 0x0 1. "FE,Framing error" "0,1" bitfld.long 0x0 0. "PE,Parity error" "0,1" group.long 0x20++0x3 line.long 0x0 "ICR,Interrupt flag clear register" bitfld.long 0x0 20. "WUCF,Wakeup from Stop mode clear" "0,1" bitfld.long 0x0 17. "CMCF,Character match clear flag" "0,1" bitfld.long 0x0 12. "EOBCF,End of timeout clear flag" "0,1" bitfld.long 0x0 11. "RTOCF,Receiver timeout clear" "0,1" bitfld.long 0x0 9. "CTSCF,CTS clear flag" "0,1" bitfld.long 0x0 8. "LBDCF,LIN break detection clear" "0,1" bitfld.long 0x0 6. "TCCF,Transmission complete clear" "0,1" bitfld.long 0x0 4. "IDLECF,Idle line detected clear" "0,1" newline bitfld.long 0x0 3. "ORECF,Overrun error clear flag" "0,1" bitfld.long 0x0 2. "NCF,Noise detected clear flag" "0,1" bitfld.long 0x0 1. "FECF,Framing error clear flag" "0,1" bitfld.long 0x0 0. "PECF,Parity error clear flag" "0,1" rgroup.long 0x24++0x3 line.long 0x0 "RDR,Receive data register" hexmask.long.word 0x0 0.--8. 1. "RDR,Receive data value" group.long 0x28++0x3 line.long 0x0 "TDR,Transmit data register" hexmask.long.word 0x0 0.--8. 1. "TDR,Transmit data value" tree.end endif tree "USART1" base ad:0x40013800 group.long 0x0++0xF line.long 0x0 "CR1,Control register 1" bitfld.long 0x0 28. "M1,Word length" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 27. "EOBIE,End of Block interrupt" "0,1" endif bitfld.long 0x0 26. "RTOIE,Receiver timeout interrupt" "0,1" hexmask.long.byte 0x0 21.--25. 1. "DEAT,Driver Enable assertion" hexmask.long.byte 0x0 16.--20. 1. "DEDT,Driver Enable deassertion" bitfld.long 0x0 15. "OVER8,Oversampling mode" "0,1" bitfld.long 0x0 14. "CMIE,Character match interrupt" "0,1" bitfld.long 0x0 13. "MME,Mute mode enable" "0,1" newline sif (cpuis("FT32F0??*")) bitfld.long 0x0 12. "M0,Word length" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 12. "M,Word length" "0,1" endif bitfld.long 0x0 11. "WAKE,Receiver wakeup method" "0,1" bitfld.long 0x0 10. "PCE,Parity control enable" "0,1" bitfld.long 0x0 9. "PS,Parity selection" "0,1" bitfld.long 0x0 8. "PEIE,PE interrupt enable" "0,1" bitfld.long 0x0 7. "TXEIE,interrupt enable" "0,1" bitfld.long 0x0 6. "TCIE,Transmission complete interrupt" "0,1" newline bitfld.long 0x0 5. "RXNEIE,RXNE interrupt enable" "0,1" bitfld.long 0x0 4. "IDLEIE,IDLE interrupt enable" "0,1" bitfld.long 0x0 3. "TE,Transmitter enable" "0,1" bitfld.long 0x0 2. "RE,Receiver enable" "0,1" bitfld.long 0x0 1. "UESM,USART enable in Stop mode" "0,1" bitfld.long 0x0 0. "UE,USART enable" "0,1" line.long 0x4 "CR2,Control register 2" sif (cpuis("FT32F072?*")) hexmask.long.byte 0x4 28.--31. 1. "ADD4,Address of the USART node" endif sif (cpuis("FT32F0??*")) hexmask.long.byte 0x4 24.--31. 1. "ADD,Address of the USART node" bitfld.long 0x4 4. "ADDM,7-bit Address Detection/4-bit Address" "0,1" endif sif (cpuis("FT32F072?*")) hexmask.long.byte 0x4 24.--27. 1. "ADD0,Address of the USART node" endif bitfld.long 0x4 23. "RTOEN,Receiver timeout enable" "0,1" bitfld.long 0x4 21.--22. "ABRMOD,Auto baud rate mode" "0,1,2,3" bitfld.long 0x4 20. "ABREN,Auto baud rate enable" "0,1" bitfld.long 0x4 19. "MSBFIRST,Most significant bit first" "0,1" newline bitfld.long 0x4 18. "DATAINV,Binary data inversion" "0,1" bitfld.long 0x4 17. "TXINV,TX pin active level" "0,1" bitfld.long 0x4 16. "RXINV,RX pin active level" "0,1" bitfld.long 0x4 15. "SWAP,Swap TX/RX pins" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x4 14. "LINEN,LIN mode enable" "0,1" endif bitfld.long 0x4 12.--13. "STOP,STOP bits" "0,1,2,3" bitfld.long 0x4 11. "CLKEN,Clock enable" "0,1" bitfld.long 0x4 10. "CPOL,Clock polarity" "0,1" newline bitfld.long 0x4 9. "CPHA,Clock phase" "0,1" bitfld.long 0x4 8. "LBCL,Last bit clock pulse" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x4 6. "LBDIE,LIN break detection interrupt" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x4 5. "LBDL,LIN break detection length" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x4 4. "ADDM7,7-bit Address Detection/4-bit Address" "0,1" endif line.long 0x8 "CR3,Control register 3" sif (cpuis("FT32F072?*")) bitfld.long 0x8 22. "WUFIE,Wakeup from Stop mode interrupt" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 20.--21. "WUS,Wakeup from Stop mode interrupt flag" "0,1,2,3" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 17.--19. "SCARCNT,Smartcard auto-retry count" "0,1,2,3,4,5,6,7" endif bitfld.long 0x8 15. "DEP,Driver enable polarity" "0,1" bitfld.long 0x8 14. "DEM,Driver enable mode" "0,1" bitfld.long 0x8 13. "DDRE,DMA Disable on Reception" "0,1" bitfld.long 0x8 12. "OVRDIS,Overrun Disable" "0,1" bitfld.long 0x8 11. "ONEBIT,One sample bit method" "0,1" newline bitfld.long 0x8 10. "CTSIE,CTS interrupt enable" "0,1" bitfld.long 0x8 9. "CTSE,CTS enable" "0,1" bitfld.long 0x8 8. "RTSE,RTS enable" "0,1" bitfld.long 0x8 7. "DMAT,DMA enable transmitter" "0,1" bitfld.long 0x8 6. "DMAR,DMA enable receiver" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x8 5. "SCEN,Smartcard mode enable" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 4. "NACK,Smartcard NACK enable" "0,1" endif bitfld.long 0x8 3. "HDSEL,Half-duplex selection" "0,1" newline sif (cpuis("FT32F072?*")) bitfld.long 0x8 2. "IRLP,IrDA low-power" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 1. "IREN,IrDA mode enable" "0,1" endif bitfld.long 0x8 0. "EIE,Error interrupt enable" "0,1" line.long 0xC "BRR,Baud rate register" hexmask.long.word 0xC 4.--15. 1. "DIV_Mantissa,mantissa of USARTDIV" hexmask.long.byte 0xC 0.--3. 1. "DIV_Fraction,fraction of USARTDIV" sif (cpuis("FT32F072?*")) group.long 0x10++0x3 line.long 0x0 "GTPR,Guard time and prescaler" hexmask.long.byte 0x0 8.--15. 1. "GT,Guard time value" hexmask.long.byte 0x0 0.--7. 1. "PSC,Prescaler value" endif group.long 0x14++0x7 line.long 0x0 "RTOR,Receiver timeout register" sif (cpuis("FT32F072?*")) hexmask.long.byte 0x0 24.--31. 1. "BLEN,Block Length" endif hexmask.long.tbyte 0x0 0.--23. 1. "RTO,Receiver timeout value" line.long 0x4 "RQR,Request register" sif (cpuis("FT32F072?*")) bitfld.long 0x4 4. "TXFRQ,Transmit data flush" "0,1" endif bitfld.long 0x4 3. "RXFRQ,Receive data flush request" "0,1" bitfld.long 0x4 2. "MMRQ,Mute mode request" "0,1" bitfld.long 0x4 1. "SBKRQ,Send break request" "0,1" bitfld.long 0x4 0. "ABRRQ,Auto baud rate request" "0,1" rgroup.long 0x1C++0x3 line.long 0x0 "ISR,Interrupt & status" sif (cpuis("FT32F072?*")) bitfld.long 0x0 22. "REACK,Receive enable acknowledge" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 21. "TEACK,Transmit enable acknowledge" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 20. "WUF,Wakeup from Stop mode flag" "0,1" endif bitfld.long 0x0 19. "RWU,Receiver wakeup from Mute" "0,1" bitfld.long 0x0 18. "SBKF,Send break flag" "0,1" bitfld.long 0x0 17. "CMF,character match flag" "0,1" bitfld.long 0x0 16. "BUSY,Busy flag" "0,1" bitfld.long 0x0 15. "ABRF,Auto baud rate flag" "0,1" newline bitfld.long 0x0 14. "ABRE,Auto baud rate error" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 12. "EOBF,End of block flag" "0,1" endif bitfld.long 0x0 11. "RTOF,Receiver timeout" "0,1" bitfld.long 0x0 10. "CTS,CTS flag" "0,1" bitfld.long 0x0 9. "CTSIF,CTS interrupt flag" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 8. "LBDF,LIN break detection flag" "0,1" endif bitfld.long 0x0 7. "TXE,Transmit data register" "0,1" bitfld.long 0x0 6. "TC,Transmission complete" "0,1" newline bitfld.long 0x0 5. "RXNE,Read data register not" "0,1" bitfld.long 0x0 4. "IDLE,Idle line detected" "0,1" bitfld.long 0x0 3. "ORE,Overrun error" "0,1" bitfld.long 0x0 2. "NF,Noise detected flag" "0,1" bitfld.long 0x0 1. "FE,Framing error" "0,1" bitfld.long 0x0 0. "PE,Parity error" "0,1" group.long 0x20++0x3 line.long 0x0 "ICR,Interrupt flag clear register" sif (cpuis("FT32F072?*")) bitfld.long 0x0 20. "WUCF,Wakeup from Stop mode clear" "0,1" endif bitfld.long 0x0 17. "CMCF,Character match clear flag" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 12. "EOBCF,End of timeout clear flag" "0,1" endif bitfld.long 0x0 11. "RTOCF,Receiver timeout clear" "0,1" bitfld.long 0x0 9. "CTSCF,CTS clear flag" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 8. "LBDCF,LIN break detection clear" "0,1" endif bitfld.long 0x0 6. "TCCF,Transmission complete clear" "0,1" bitfld.long 0x0 4. "IDLECF,Idle line detected clear" "0,1" newline bitfld.long 0x0 3. "ORECF,Overrun error clear flag" "0,1" bitfld.long 0x0 2. "NCF,Noise detected clear flag" "0,1" bitfld.long 0x0 1. "FECF,Framing error clear flag" "0,1" bitfld.long 0x0 0. "PECF,Parity error clear flag" "0,1" rgroup.long 0x24++0x3 line.long 0x0 "RDR,Receive data register" hexmask.long.word 0x0 0.--8. 1. "RDR,Receive data value" group.long 0x28++0x3 line.long 0x0 "TDR,Transmit data register" hexmask.long.word 0x0 0.--8. 1. "TDR,Transmit data value" tree.end tree "USART2" base ad:0x40004400 group.long 0x0++0xF line.long 0x0 "CR1,Control register 1" bitfld.long 0x0 28. "M1,Word length" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 27. "EOBIE,End of Block interrupt" "0,1" endif bitfld.long 0x0 26. "RTOIE,Receiver timeout interrupt" "0,1" hexmask.long.byte 0x0 21.--25. 1. "DEAT,Driver Enable assertion" hexmask.long.byte 0x0 16.--20. 1. "DEDT,Driver Enable deassertion" bitfld.long 0x0 15. "OVER8,Oversampling mode" "0,1" bitfld.long 0x0 14. "CMIE,Character match interrupt" "0,1" bitfld.long 0x0 13. "MME,Mute mode enable" "0,1" newline sif (cpuis("FT32F0??*")) bitfld.long 0x0 12. "M0,Word length" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 12. "M,Word length" "0,1" endif bitfld.long 0x0 11. "WAKE,Receiver wakeup method" "0,1" bitfld.long 0x0 10. "PCE,Parity control enable" "0,1" bitfld.long 0x0 9. "PS,Parity selection" "0,1" bitfld.long 0x0 8. "PEIE,PE interrupt enable" "0,1" bitfld.long 0x0 7. "TXEIE,interrupt enable" "0,1" bitfld.long 0x0 6. "TCIE,Transmission complete interrupt" "0,1" newline bitfld.long 0x0 5. "RXNEIE,RXNE interrupt enable" "0,1" bitfld.long 0x0 4. "IDLEIE,IDLE interrupt enable" "0,1" bitfld.long 0x0 3. "TE,Transmitter enable" "0,1" bitfld.long 0x0 2. "RE,Receiver enable" "0,1" bitfld.long 0x0 1. "UESM,USART enable in Stop mode" "0,1" bitfld.long 0x0 0. "UE,USART enable" "0,1" line.long 0x4 "CR2,Control register 2" sif (cpuis("FT32F072?*")) hexmask.long.byte 0x4 28.--31. 1. "ADD4,Address of the USART node" endif sif (cpuis("FT32F0??*")) hexmask.long.byte 0x4 24.--31. 1. "ADD,Address of the USART node" bitfld.long 0x4 4. "ADDM,7-bit Address Detection/4-bit Address" "0,1" endif sif (cpuis("FT32F072?*")) hexmask.long.byte 0x4 24.--27. 1. "ADD0,Address of the USART node" endif bitfld.long 0x4 23. "RTOEN,Receiver timeout enable" "0,1" bitfld.long 0x4 21.--22. "ABRMOD,Auto baud rate mode" "0,1,2,3" bitfld.long 0x4 20. "ABREN,Auto baud rate enable" "0,1" bitfld.long 0x4 19. "MSBFIRST,Most significant bit first" "0,1" newline bitfld.long 0x4 18. "DATAINV,Binary data inversion" "0,1" bitfld.long 0x4 17. "TXINV,TX pin active level" "0,1" bitfld.long 0x4 16. "RXINV,RX pin active level" "0,1" bitfld.long 0x4 15. "SWAP,Swap TX/RX pins" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x4 14. "LINEN,LIN mode enable" "0,1" endif bitfld.long 0x4 12.--13. "STOP,STOP bits" "0,1,2,3" bitfld.long 0x4 11. "CLKEN,Clock enable" "0,1" bitfld.long 0x4 10. "CPOL,Clock polarity" "0,1" newline bitfld.long 0x4 9. "CPHA,Clock phase" "0,1" bitfld.long 0x4 8. "LBCL,Last bit clock pulse" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x4 6. "LBDIE,LIN break detection interrupt" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x4 5. "LBDL,LIN break detection length" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x4 4. "ADDM7,7-bit Address Detection/4-bit Address" "0,1" endif line.long 0x8 "CR3,Control register 3" sif (cpuis("FT32F072?*")) bitfld.long 0x8 22. "WUFIE,Wakeup from Stop mode interrupt" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 20.--21. "WUS,Wakeup from Stop mode interrupt flag" "0,1,2,3" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 17.--19. "SCARCNT,Smartcard auto-retry count" "0,1,2,3,4,5,6,7" endif bitfld.long 0x8 15. "DEP,Driver enable polarity" "0,1" bitfld.long 0x8 14. "DEM,Driver enable mode" "0,1" bitfld.long 0x8 13. "DDRE,DMA Disable on Reception" "0,1" bitfld.long 0x8 12. "OVRDIS,Overrun Disable" "0,1" bitfld.long 0x8 11. "ONEBIT,One sample bit method" "0,1" newline bitfld.long 0x8 10. "CTSIE,CTS interrupt enable" "0,1" bitfld.long 0x8 9. "CTSE,CTS enable" "0,1" bitfld.long 0x8 8. "RTSE,RTS enable" "0,1" bitfld.long 0x8 7. "DMAT,DMA enable transmitter" "0,1" bitfld.long 0x8 6. "DMAR,DMA enable receiver" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x8 5. "SCEN,Smartcard mode enable" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 4. "NACK,Smartcard NACK enable" "0,1" endif bitfld.long 0x8 3. "HDSEL,Half-duplex selection" "0,1" newline sif (cpuis("FT32F072?*")) bitfld.long 0x8 2. "IRLP,IrDA low-power" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x8 1. "IREN,IrDA mode enable" "0,1" endif bitfld.long 0x8 0. "EIE,Error interrupt enable" "0,1" line.long 0xC "BRR,Baud rate register" hexmask.long.word 0xC 4.--15. 1. "DIV_Mantissa,mantissa of USARTDIV" hexmask.long.byte 0xC 0.--3. 1. "DIV_Fraction,fraction of USARTDIV" sif (cpuis("FT32F072?*")) group.long 0x10++0x3 line.long 0x0 "GTPR,Guard time and prescaler" hexmask.long.byte 0x0 8.--15. 1. "GT,Guard time value" hexmask.long.byte 0x0 0.--7. 1. "PSC,Prescaler value" endif group.long 0x14++0x7 line.long 0x0 "RTOR,Receiver timeout register" sif (cpuis("FT32F072?*")) hexmask.long.byte 0x0 24.--31. 1. "BLEN,Block Length" endif hexmask.long.tbyte 0x0 0.--23. 1. "RTO,Receiver timeout value" line.long 0x4 "RQR,Request register" sif (cpuis("FT32F072?*")) bitfld.long 0x4 4. "TXFRQ,Transmit data flush" "0,1" endif bitfld.long 0x4 3. "RXFRQ,Receive data flush request" "0,1" bitfld.long 0x4 2. "MMRQ,Mute mode request" "0,1" bitfld.long 0x4 1. "SBKRQ,Send break request" "0,1" bitfld.long 0x4 0. "ABRRQ,Auto baud rate request" "0,1" rgroup.long 0x1C++0x3 line.long 0x0 "ISR,Interrupt & status" sif (cpuis("FT32F072?*")) bitfld.long 0x0 22. "REACK,Receive enable acknowledge" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 21. "TEACK,Transmit enable acknowledge" "0,1" endif sif (cpuis("FT32F072?*")) bitfld.long 0x0 20. "WUF,Wakeup from Stop mode flag" "0,1" endif bitfld.long 0x0 19. "RWU,Receiver wakeup from Mute" "0,1" bitfld.long 0x0 18. "SBKF,Send break flag" "0,1" bitfld.long 0x0 17. "CMF,character match flag" "0,1" bitfld.long 0x0 16. "BUSY,Busy flag" "0,1" bitfld.long 0x0 15. "ABRF,Auto baud rate flag" "0,1" newline bitfld.long 0x0 14. "ABRE,Auto baud rate error" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 12. "EOBF,End of block flag" "0,1" endif bitfld.long 0x0 11. "RTOF,Receiver timeout" "0,1" bitfld.long 0x0 10. "CTS,CTS flag" "0,1" bitfld.long 0x0 9. "CTSIF,CTS interrupt flag" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 8. "LBDF,LIN break detection flag" "0,1" endif bitfld.long 0x0 7. "TXE,Transmit data register" "0,1" bitfld.long 0x0 6. "TC,Transmission complete" "0,1" newline bitfld.long 0x0 5. "RXNE,Read data register not" "0,1" bitfld.long 0x0 4. "IDLE,Idle line detected" "0,1" bitfld.long 0x0 3. "ORE,Overrun error" "0,1" bitfld.long 0x0 2. "NF,Noise detected flag" "0,1" bitfld.long 0x0 1. "FE,Framing error" "0,1" bitfld.long 0x0 0. "PE,Parity error" "0,1" group.long 0x20++0x3 line.long 0x0 "ICR,Interrupt flag clear register" sif (cpuis("FT32F072?*")) bitfld.long 0x0 20. "WUCF,Wakeup from Stop mode clear" "0,1" endif bitfld.long 0x0 17. "CMCF,Character match clear flag" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 12. "EOBCF,End of timeout clear flag" "0,1" endif bitfld.long 0x0 11. "RTOCF,Receiver timeout clear" "0,1" bitfld.long 0x0 9. "CTSCF,CTS clear flag" "0,1" sif (cpuis("FT32F072?*")) bitfld.long 0x0 8. "LBDCF,LIN break detection clear" "0,1" endif bitfld.long 0x0 6. "TCCF,Transmission complete clear" "0,1" bitfld.long 0x0 4. "IDLECF,Idle line detected clear" "0,1" newline bitfld.long 0x0 3. "ORECF,Overrun error clear flag" "0,1" bitfld.long 0x0 2. "NCF,Noise detected clear flag" "0,1" bitfld.long 0x0 1. "FECF,Framing error clear flag" "0,1" bitfld.long 0x0 0. "PECF,Parity error clear flag" "0,1" rgroup.long 0x24++0x3 line.long 0x0 "RDR,Receive data register" hexmask.long.word 0x0 0.--8. 1. "RDR,Receive data value" group.long 0x28++0x3 line.long 0x0 "TDR,Transmit data register" hexmask.long.word 0x0 0.--8. 1. "TDR,Transmit data value" tree.end tree.end tree "USB (Universal Serial Bus FS Device Interface)" base ad:0x40005C00 sif (cpuis("FT32F0??*")) group.byte 0x0++0x2 line.byte 0x0 "FADDR,FADDR register" bitfld.byte 0x0 7. "UPDATE,Endpoint address" "0,1" hexmask.byte 0x0 0.--6. 1. "FADDR,Status bits for transmission" line.byte 0x1 "POWER,POWER register" bitfld.byte 0x1 7. "ISOUPDATE,ISOUPDATE" "0,1" bitfld.byte 0x1 3. "RESET,Status bits for transmission" "0,1" newline bitfld.byte 0x1 2. "RESUME,Data Toggle for transmission" "0,1" bitfld.byte 0x1 1. "SUSPENDM,Correct Transfer for" "0,1" newline bitfld.byte 0x1 0. "SUSPENDE,Endpoint kind" "0,1" line.byte 0x2 "INTRIN,INTRIN register" bitfld.byte 0x2 7. "EP7INF,Endpoint address" "0,1" bitfld.byte 0x2 6. "EP6INF,Status bits for transmission" "0,1" newline bitfld.byte 0x2 5. "EP5INF,Data Toggle for transmission" "0,1" bitfld.byte 0x2 4. "EP4INF,Correct Transfer for" "0,1" newline bitfld.byte 0x2 3. "EP3INF,Endpoint kind" "0,1" bitfld.byte 0x2 2. "EP2INF,Endpoint type" "0,1" newline bitfld.byte 0x2 1. "EP1INF,Setup transaction" "0,1" bitfld.byte 0x2 0. "EP0F,Status bits for reception" "0,1" group.byte 0x4++0x0 line.byte 0x0 "INTROUT,INTROUT register" bitfld.byte 0x0 7. "EP7OUTF,Endpoint address" "0,1" bitfld.byte 0x0 6. "EP6OUTF,Status bits for transmission" "0,1" newline bitfld.byte 0x0 5. "EP5OUTF,Data Toggle for transmission" "0,1" bitfld.byte 0x0 4. "EP4OUTF,Correct Transfer for" "0,1" newline bitfld.byte 0x0 3. "EP3OUTF,Endpoint kind" "0,1" bitfld.byte 0x0 2. "EP2OUTF,Endpoint type" "0,1" newline bitfld.byte 0x0 1. "EP1OUTF,Setup transaction" "0,1" group.byte 0x6++0x1 line.byte 0x0 "INTRUSB,INTRUSB register" bitfld.byte 0x0 3. "SOF,Endpoint kind" "0,1" bitfld.byte 0x0 2. "RESET,Endpoint type" "0,1" newline bitfld.byte 0x0 1. "RESUME,Setup transaction" "0,1" bitfld.byte 0x0 0. "SUSPEND,Status bits for reception" "0,1" line.byte 0x1 "INTRINE,INTRINE register" bitfld.byte 0x1 7. "EP7INE,Endpoint kind" "0,1" bitfld.byte 0x1 6. "EP6INE,Endpoint type" "0,1" newline bitfld.byte 0x1 5. "EP5INE,Setup transaction" "0,1" bitfld.byte 0x1 4. "EP4INE,Status bits for reception" "0,1" newline bitfld.byte 0x1 3. "EP3INE,Endpoint kind" "0,1" bitfld.byte 0x1 2. "EP2INE,Endpoint type" "0,1" newline bitfld.byte 0x1 1. "EP1INE,Setup transaction" "0,1" bitfld.byte 0x1 0. "EP0E,Status bits for reception" "0,1" group.byte 0x9++0x0 line.byte 0x0 "INTROUTE,INTROUTE register" bitfld.byte 0x0 7. "EP7OUTE,Endpoint kind" "0,1" bitfld.byte 0x0 6. "EP6OUTE,Endpoint type" "0,1" newline bitfld.byte 0x0 5. "EP5OUTE,Setup transaction" "0,1" bitfld.byte 0x0 4. "EP4OUTE,Status bits for reception" "0,1" newline bitfld.byte 0x0 3. "EP3OUTE,Endpoint kind" "0,1" bitfld.byte 0x0 2. "EP2OUTE,Endpoint type" "0,1" newline bitfld.byte 0x0 1. "EP1OUTE,Setup transaction" "0,1" group.byte 0xB++0xB line.byte 0x0 "INTRUSBE,INTRUSBE register" bitfld.byte 0x0 3. "SOFIE,Endpoint kind" "0,1" bitfld.byte 0x0 2. "RESETIE,Endpoint type" "0,1" newline bitfld.byte 0x0 1. "RESUMEIE,Setup transaction" "0,1" bitfld.byte 0x0 0. "SUSPENDIE,Setup transaction" "0,1" line.byte 0x1 "FRAM1,FRAM1 register" hexmask.byte 0x1 0.--7. 1. "FRAM1,Force USB Reset" line.byte 0x2 "FRAM2,FRAM2 register" bitfld.byte 0x2 0.--2. "FRAM2,Force USB Reset" "0,1,2,3,4,5,6,7" line.byte 0x3 "INDEX,INDEX register" hexmask.byte 0x3 0.--3. 1. "INDEX,Force USB Reset" line.byte 0x4 "PDCTRL,PDCTRL register" bitfld.byte 0x4 1. "PDEN,Force USB Reset" "0,1" bitfld.byte 0x4 0. "PUEN,Force USB Reset" "0,1" line.byte 0x5 "INMAXP,INMAXP register" hexmask.byte 0x5 0.--7. 1. "INMAXP,Force USB Reset" line.byte 0x6 "CSR0_INCSR1,CSR0_INCSR1 register" bitfld.byte 0x6 7. "SSETUPEND,Endpoint kind" "0,1" bitfld.byte 0x6 6. "SOUTPKTRDY,Endpoint type" "0,1" newline bitfld.byte 0x6 5. "SENDSTALL,Setup transaction" "0,1" bitfld.byte 0x6 4. "SETUPEND,Status bits for reception" "0,1" newline bitfld.byte 0x6 3. "DATAEND,Endpoint kind" "0,1" bitfld.byte 0x6 2. "SENTSTALL,Endpoint type" "0,1" newline bitfld.byte 0x6 1. "INPKTRDY,Setup transaction" "0,1" bitfld.byte 0x6 0. "OUTPKTRDY,Setup transaction" "0,1" line.byte 0x7 "INCSR2,INCSR2 register" bitfld.byte 0x7 7. "AUTOSET,Endpoint kind" "0,1" bitfld.byte 0x7 6. "ISO,Endpoint type" "0,1" newline bitfld.byte 0x7 5. "MODE,Setup transaction" "0,1" bitfld.byte 0x7 3. "FRCDATATOG,Endpoint kind" "0,1" line.byte 0x8 "OUTMAXP,OUTMAXP register" hexmask.byte 0x8 0.--7. 1. "OUTMAXP,Endpoint kind" line.byte 0x9 "OUTCSR1,OUTCSR1 register" bitfld.byte 0x9 7. "CLRDATATOG,Endpoint kind" "0,1" bitfld.byte 0x9 6. "SENTSTALL,Endpoint type" "0,1" newline bitfld.byte 0x9 5. "SENDSTALL,Setup transaction" "0,1" bitfld.byte 0x9 4. "FLUSHFIFO,Status bits for reception" "0,1" newline bitfld.byte 0x9 3. "DATAERROR,Endpoint kind" "0,1" bitfld.byte 0x9 2. "OVERRUN,Endpoint type" "0,1" newline bitfld.byte 0x9 1. "FIFOF,Setup transaction" "0,1" bitfld.byte 0x9 0. "OUTPKTRDY,Setup transaction" "0,1" line.byte 0xA "OUTCSR2,OUTCSR2 register" bitfld.byte 0xA 7. "AUTOCLEAR,Endpoint kind" "0,1" bitfld.byte 0xA 6. "ISO,Endpoint type" "0,1" line.byte 0xB "OUTCOUNTER,OUTCOUNTER register" hexmask.byte 0xB 0.--7. 1. "OUTCOUNTER,Endpoint kind" group.byte 0x20++0x0 line.byte 0x0 "FIFO0,FIFO0 register" hexmask.byte 0x0 0.--7. 1. "FIFO0,Endpoint kind" group.byte 0x24++0x0 line.byte 0x0 "FIFO1,FIFO1 register" hexmask.byte 0x0 0.--7. 1. "FIFO1,Endpoint kind" group.byte 0x28++0x0 line.byte 0x0 "FIFO2,FIFO2 register" hexmask.byte 0x0 0.--7. 1. "FIFO2,Endpoint kind" group.byte 0x2C++0x0 line.byte 0x0 "FIFO3,FIFO3 register" hexmask.byte 0x0 0.--7. 1. "FIFO3,Endpoint kind" group.byte 0x30++0x0 line.byte 0x0 "FIFO4,FIFO4 register" hexmask.byte 0x0 0.--7. 1. "FIFO4,Endpoint kind" group.byte 0x34++0x0 line.byte 0x0 "FIFO5,FIFO5 register" hexmask.byte 0x0 0.--7. 1. "FIFO5,Endpoint kind" group.byte 0x38++0x0 line.byte 0x0 "FIFO6,FIFO6 register" hexmask.byte 0x0 0.--7. 1. "FIFO6,Endpoint kind" group.byte 0x3C++0x0 line.byte 0x0 "FIFO7,FIFO7 register" hexmask.byte 0x0 0.--7. 1. "FIFO7,Endpoint kind" endif sif (cpuis("FT32F072?*")) group.long 0x0++0x1F line.long 0x0 "EP0R,endpoint 0 register" bitfld.long 0x0 15. "CTR_RX,Correct transfer for" "0,1" bitfld.long 0x0 14. "DTOG_RX,Data Toggle for reception" "0,1" newline bitfld.long 0x0 12.--13. "STAT_RX,Status bits for reception" "0,1,2,3" bitfld.long 0x0 11. "SETUP,Setup transaction" "0,1" newline bitfld.long 0x0 9.--10. "EP_TYPE,Endpoint type" "0,1,2,3" bitfld.long 0x0 8. "EP_KIND,Endpoint kind" "0,1" newline bitfld.long 0x0 7. "CTR_TX,Correct Transfer for" "0,1" bitfld.long 0x0 6. "DTOG_TX,Data Toggle for transmission" "0,1" newline bitfld.long 0x0 4.--5. "STAT_TX,Status bits for transmission" "0,1,2,3" hexmask.long.byte 0x0 0.--3. 1. "EA,Endpoint address" line.long 0x4 "EP1R,endpoint 1 register" bitfld.long 0x4 15. "CTR_RX,Correct transfer for" "0,1" bitfld.long 0x4 14. "DTOG_RX,Data Toggle for reception" "0,1" newline bitfld.long 0x4 12.--13. "STAT_RX,Status bits for reception" "0,1,2,3" bitfld.long 0x4 11. "SETUP,Setup transaction" "0,1" newline bitfld.long 0x4 9.--10. "EP_TYPE,Endpoint type" "0,1,2,3" bitfld.long 0x4 8. "EP_KIND,Endpoint kind" "0,1" newline bitfld.long 0x4 7. "CTR_TX,Correct Transfer for" "0,1" bitfld.long 0x4 6. "DTOG_TX,Data Toggle for transmission" "0,1" newline bitfld.long 0x4 4.--5. "STAT_TX,Status bits for transmission" "0,1,2,3" hexmask.long.byte 0x4 0.--3. 1. "EA,Endpoint address" line.long 0x8 "EP2R,endpoint 2 register" bitfld.long 0x8 15. "CTR_RX,Correct transfer for" "0,1" bitfld.long 0x8 14. "DTOG_RX,Data Toggle for reception" "0,1" newline bitfld.long 0x8 12.--13. "STAT_RX,Status bits for reception" "0,1,2,3" bitfld.long 0x8 11. "SETUP,Setup transaction" "0,1" newline bitfld.long 0x8 9.--10. "EP_TYPE,Endpoint type" "0,1,2,3" bitfld.long 0x8 8. "EP_KIND,Endpoint kind" "0,1" newline bitfld.long 0x8 7. "CTR_TX,Correct Transfer for" "0,1" bitfld.long 0x8 6. "DTOG_TX,Data Toggle for transmission" "0,1" newline bitfld.long 0x8 4.--5. "STAT_TX,Status bits for transmission" "0,1,2,3" hexmask.long.byte 0x8 0.--3. 1. "EA,Endpoint address" line.long 0xC "EP3R,endpoint 3 register" bitfld.long 0xC 15. "CTR_RX,Correct transfer for" "0,1" bitfld.long 0xC 14. "DTOG_RX,Data Toggle for reception" "0,1" newline bitfld.long 0xC 12.--13. "STAT_RX,Status bits for reception" "0,1,2,3" bitfld.long 0xC 11. "SETUP,Setup transaction" "0,1" newline bitfld.long 0xC 9.--10. "EP_TYPE,Endpoint type" "0,1,2,3" bitfld.long 0xC 8. "EP_KIND,Endpoint kind" "0,1" newline bitfld.long 0xC 7. "CTR_TX,Correct Transfer for" "0,1" bitfld.long 0xC 6. "DTOG_TX,Data Toggle for transmission" "0,1" newline bitfld.long 0xC 4.--5. "STAT_TX,Status bits for transmission" "0,1,2,3" hexmask.long.byte 0xC 0.--3. 1. "EA,Endpoint address" line.long 0x10 "EP4R,endpoint 4 register" bitfld.long 0x10 15. "CTR_RX,Correct transfer for" "0,1" bitfld.long 0x10 14. "DTOG_RX,Data Toggle for reception" "0,1" newline bitfld.long 0x10 12.--13. "STAT_RX,Status bits for reception" "0,1,2,3" bitfld.long 0x10 11. "SETUP,Setup transaction" "0,1" newline bitfld.long 0x10 9.--10. "EP_TYPE,Endpoint type" "0,1,2,3" bitfld.long 0x10 8. "EP_KIND,Endpoint kind" "0,1" newline bitfld.long 0x10 7. "CTR_TX,Correct Transfer for" "0,1" bitfld.long 0x10 6. "DTOG_TX,Data Toggle for transmission" "0,1" newline bitfld.long 0x10 4.--5. "STAT_TX,Status bits for transmission" "0,1,2,3" hexmask.long.byte 0x10 0.--3. 1. "EA,Endpoint address" line.long 0x14 "EP5R,endpoint 5 register" bitfld.long 0x14 15. "CTR_RX,Correct transfer for" "0,1" bitfld.long 0x14 14. "DTOG_RX,Data Toggle for reception" "0,1" newline bitfld.long 0x14 12.--13. "STAT_RX,Status bits for reception" "0,1,2,3" bitfld.long 0x14 11. "SETUP,Setup transaction" "0,1" newline bitfld.long 0x14 9.--10. "EP_TYPE,Endpoint type" "0,1,2,3" bitfld.long 0x14 8. "EP_KIND,Endpoint kind" "0,1" newline bitfld.long 0x14 7. "CTR_TX,Correct Transfer for" "0,1" bitfld.long 0x14 6. "DTOG_TX,Data Toggle for transmission" "0,1" newline bitfld.long 0x14 4.--5. "STAT_TX,Status bits for transmission" "0,1,2,3" hexmask.long.byte 0x14 0.--3. 1. "EA,Endpoint address" line.long 0x18 "EP6R,endpoint 6 register" bitfld.long 0x18 15. "CTR_RX,Correct transfer for" "0,1" bitfld.long 0x18 14. "DTOG_RX,Data Toggle for reception" "0,1" newline bitfld.long 0x18 12.--13. "STAT_RX,Status bits for reception" "0,1,2,3" bitfld.long 0x18 11. "SETUP,Setup transaction" "0,1" newline bitfld.long 0x18 9.--10. "EP_TYPE,Endpoint type" "0,1,2,3" bitfld.long 0x18 8. "EP_KIND,Endpoint kind" "0,1" newline bitfld.long 0x18 7. "CTR_TX,Correct Transfer for" "0,1" bitfld.long 0x18 6. "DTOG_TX,Data Toggle for transmission" "0,1" newline bitfld.long 0x18 4.--5. "STAT_TX,Status bits for transmission" "0,1,2,3" hexmask.long.byte 0x18 0.--3. 1. "EA,Endpoint address" line.long 0x1C "EP7R,endpoint 7 register" bitfld.long 0x1C 15. "CTR_RX,Correct transfer for" "0,1" bitfld.long 0x1C 14. "DTOG_RX,Data Toggle for reception" "0,1" newline bitfld.long 0x1C 12.--13. "STAT_RX,Status bits for reception" "0,1,2,3" bitfld.long 0x1C 11. "SETUP,Setup transaction" "0,1" newline bitfld.long 0x1C 9.--10. "EP_TYPE,Endpoint type" "0,1,2,3" bitfld.long 0x1C 8. "EP_KIND,Endpoint kind" "0,1" newline bitfld.long 0x1C 7. "CTR_TX,Correct Transfer for" "0,1" bitfld.long 0x1C 6. "DTOG_TX,Data Toggle for transmission" "0,1" newline bitfld.long 0x1C 4.--5. "STAT_TX,Status bits for transmission" "0,1,2,3" hexmask.long.byte 0x1C 0.--3. 1. "EA,Endpoint address" group.long 0x40++0x7 line.long 0x0 "CNTR,control register" bitfld.long 0x0 15. "CTRM,Correct transfer interrupt" "0,1" bitfld.long 0x0 14. "PMAOVRM,Packet memory area over / underrun" "0,1" newline bitfld.long 0x0 13. "ERRM,Error interrupt mask" "0,1" bitfld.long 0x0 12. "WKUPM,Wakeup interrupt mask" "0,1" newline bitfld.long 0x0 11. "SUSPM,Suspend mode interrupt" "0,1" bitfld.long 0x0 10. "RESETM,USB reset interrupt mask" "0,1" newline bitfld.long 0x0 9. "SOFM,Start of frame interrupt" "0,1" bitfld.long 0x0 8. "ESOFM,Expected start of frame interrupt" "0,1" newline bitfld.long 0x0 7. "L1REQM,LPM L1 state request interrupt" "0,1" bitfld.long 0x0 5. "L1RESUME,LPM L1 Resume request" "0,1" newline bitfld.long 0x0 4. "RESUME,Resume request" "0,1" bitfld.long 0x0 3. "FSUSP,Force suspend" "0,1" newline bitfld.long 0x0 2. "LPMODE,Low-power mode" "0,1" bitfld.long 0x0 1. "PDWN,Power down" "0,1" newline bitfld.long 0x0 0. "FRES,Force USB Reset" "0,1" line.long 0x4 "ISTR,interrupt status register" rbitfld.long 0x4 15. "CTR,Correct transfer" "0,1" bitfld.long 0x4 14. "PMAOVR,Packet memory area over /" "0,1" newline bitfld.long 0x4 13. "ERR,Error" "0,1" bitfld.long 0x4 12. "WKUP,Wakeup" "0,1" newline bitfld.long 0x4 11. "SUSP,Suspend mode request" "0,1" bitfld.long 0x4 10. "RESET,reset request" "0,1" newline bitfld.long 0x4 9. "SOF,start of frame" "0,1" bitfld.long 0x4 8. "ESOF,Expected start frame" "0,1" newline bitfld.long 0x4 7. "L1REQ,LPM L1 state request" "0,1" rbitfld.long 0x4 4. "DIR,Direction of transaction" "0,1" newline hexmask.long.byte 0x4 0.--3. 1. "EP_ID,Endpoint Identifier" rgroup.long 0x48++0x3 line.long 0x0 "FNR,frame number register" bitfld.long 0x0 15. "RXDP,Receive data + line status" "0,1" bitfld.long 0x0 14. "RXDM,Receive data - line status" "0,1" newline bitfld.long 0x0 13. "LCK,Locked" "0,1" bitfld.long 0x0 11.--12. "LSOF,Lost SOF" "0,1,2,3" newline hexmask.long.word 0x0 0.--10. 1. "FN,Frame number" group.long 0x4C++0xF line.long 0x0 "DADDR,device address" bitfld.long 0x0 7. "EF,Enable function" "0,1" hexmask.long.byte 0x0 0.--6. 1. "ADD,Device address" line.long 0x4 "BTABLE,Buffer table address" hexmask.long.word 0x4 3.--15. 1. "BTABLE,Buffer table" line.long 0x8 "LPMCSR,LPM control and status" hexmask.long.byte 0x8 4.--7. 1. "BESL,BESL value" rbitfld.long 0x8 3. "REMWAKE,bRemoteWake value" "0,1" newline bitfld.long 0x8 1. "LPMACK,LPM Token acknowledge" "0,1" bitfld.long 0x8 0. "LPMEN,LPM support enable" "0,1" line.long 0xC "BCDR,Battery charging detector" bitfld.long 0xC 15. "DPPU,DP pull-up control" "0,1" rbitfld.long 0xC 7. "PS2DET,DM pull-up detection" "0,1" newline rbitfld.long 0xC 6. "SDET,Secondary detection (SD)" "0,1" rbitfld.long 0xC 5. "PDET,Primary detection (PD)" "0,1" newline rbitfld.long 0xC 4. "DCDET,Data contact detection (DCD)" "0,1" bitfld.long 0xC 3. "SDEN,Secondary detection (SD) mode" "0,1" newline bitfld.long 0xC 2. "PDEN,Primary detection (PD) mode" "0,1" bitfld.long 0xC 1. "DCDEN,Data contact detection (DCD) mode" "0,1" newline bitfld.long 0xC 0. "BCDEN,Battery charging detector (BCD)" "0,1" endif tree.end tree "WWDG (Window Watchdog Timer)" base ad:0x40002C00 group.long 0x0++0xB line.long 0x0 "CR,Control register" bitfld.long 0x0 7. "WDGA,Activation bit" "0,1" hexmask.long.byte 0x0 0.--6. 1. "T,7-bit counter" line.long 0x4 "CFR,Configuration register" bitfld.long 0x4 9. "EWI,Early wakeup interrupt" "0,1" bitfld.long 0x4 7.--8. "WDGTB,Timer base" "0,1,2,3" hexmask.long.byte 0x4 0.--6. 1. "W,7-bit window value" line.long 0x8 "SR,Status register" bitfld.long 0x8 0. "EWIF,Early wakeup interrupt" "0,1" tree.end newline AUTOINDENT.OFF