Gen4_R-Car_Trace32/2_Trunk/demo/arm/flash/lpc18xx-qspi.cmm

; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of NXP LPC18xx.
;
; @Description:
;
; Example for flash declaration of NXP LPC18xx external QSPI flash connected
; via SPIFI interface.
;
; Script arguments:
;
;   DO lpc18xx-qspi [PREPAREONLY] [CPU=<cpu>] [QSPI=<flashdevice>]
;
;     PREPAREONLY only declares flash but does not execute flash programming
;
;     CPU=<cpu> selects CPU derivative <cpu>
;
;     QSPI=<flashdevice> declares flash sectors depending on QSPI flash device
;
; Memories:
;
;   SPIFI memory is mapped to               0x80000000--0x87FFFFFF
;     and lower half of range also to       0x14000000--0x17FFFFFF
;   at least 32 kB local SRAM is located at 0x10000000
;
; HINTS:
;
;   Flash clock has to match SPIFI Clock Frequency. Example script is using
;   12 MHz IRC oscillator.
; @Author: WRD
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: LPC18*
; --------------------------------------------------------------------------------
; $Rev: 10516 $
; $Id: lpc18xx-qspi.cmm 10516 2022-02-02 11:39:30Z bschroefel $

  LOCAL &parameters &param_prepareonly
  ENTRY %LINE &parameters
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)

  LOCAL &param_cpu
  &param_cpu=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"CPU=","")

  LOCAL &param_qspi
  &param_qspi=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"QSPI=","")

  ; --------------------------------------------------------------------------------
  ; Setup CPU

  IF SYStem.MODE()<5
  (
    SYStem.RESet

    IF "&param_cpu"!=""
      SYStem.CPU &param_cpu
    IF !CPUIS(LPC18*)
      SYStem.CPU LPC18*

    SYStem.CONFIG.DEBUGPORTTYPE JTAG
    SYStem.CONFIG.CONNECTOR MIPI20T
    SYStem.Option.ResBreak OFF

    SYStem.Up
  )

  ; --------------------------------------------------------------------------------
  ; Flash declaration and configuration

  FLASH.RESet
  GOSUB FlashDeclaration &param_qspi

  ; Use 12 MHz Internal RC (IRC) oscillator for SPIFI clock
  PER.Set.simple SD:0x40050070 %Long 0x01000000
  FLASH.CLocK 12MHz

  ; Setup SPIFI I/O pins
  PER.Set.simple SD:0x4008618C %Long 0xF3   ; SPIFI_SCK
  PER.Set.simple SD:0x40086190 %Long 0xD3   ; SPIFI_SIO3
  PER.Set.simple SD:0x40086194 %Long 0xD3   ; SPIFI_SIO2
  PER.Set.simple SD:0x40086198 %Long 0xD3   ; SPIFI_SIO1
  PER.Set.simple SD:0x4008619C %Long 0xD3   ; SPIFI_SIO0
  PER.Set.simple SD:0x400861A0 %Long 0x13   ; SPIFI_CS

  ; Setup SPIFI memory command register to enable read access
  ; 256 Mbit devices have 4 byte addressing, smaller devices have 3 byte
  ; addressing.
  IF STRing.SCAN(STRing.UPpeR("&param_qspi"),"256",0)!=-1
    PER.Set.simple SD:0x40003018 %LE %Long (3.<<24.)|(5.<<21.)
  ELSE
    PER.Set.simple SD:0x40003018 %LE %Long (3.<<24.)|(4.<<21.)

  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE

  ; --------------------------------------------------------------------------------
  ; Flash programming example

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash 
  (
    FLASH.ReProgram.ALL /Erase
    Data.LOAD.auto *
    FLASH.ReProgram.off
  )

  ENDDO


; --------------------------------------------------------------------------------
; Flash declaration depending on selected CPU 

FlashDeclaration:
  LOCAL &QSPIflash
  ENTRY &QSPIflash

  LOCAL &FlashSize &SectorSize

  IF STRing.SCAN(STRing.UPpeR("&QSPIflash"),"N25Q256",0)!=-1
  (
    ; Micron N25Q256
    &FlashSize=0x2000000
    &SectorSize=0x10000
  )
  ELSE IF STRing.SCAN(STRing.UPpeR("&QSPIflash"),"MX25L256",0)!=-1
  (
    ; Macronix MX25L25635FMI-10G
    &FlashSize=0x2000000
    &SectorSize=0x10000
  )
  ELSE IF STRing.SCAN(STRing.UPpeR("&QSPIflash"),"S25FL032P",0)!=-1
  (
    ; Spansion S25FL032P1F
    &FlashSize=0x400000
    &SectorSize=0x10000
  )
  ELSE IF STRing.SCAN(STRing.UPpeR("&QSPIflash"),"S25FL064P",0)!=-1
  (
    ; Spansion S25FL064P1F
    &FlashSize=0x800000
    &SectorSize=0x10000
  )
  ELSE IF STRing.SCAN(STRing.UPpeR("&QSPIflash"),"S25FL256S",0)!=-1
  (
    ; Spansion S25FL256SAGMFI001
    &FlashSize=0x2000000
    &SectorSize=0x10000
  )
  ELSE IF STRing.SCAN(STRing.UPpeR("&QSPIflash"),"S25FL129P",0)!=-1
  (
    ; Spansion S25FL129P0XNFI01
    &FlashSize=0x1000000
    &SectorSize=0x10000
  )
  ELSE IF STRing.SCAN(STRing.UPpeR("&QSPIflash"),"W25Q80",0)!=-1
  (
    ; Winbond W25Q80BVSSIG
    &FlashSize=0x100000
    &SectorSize=0x10000
  )
  ELSE IF STRing.SCAN(STRing.UPpeR("&QSPIflash"),"N25Q064",0)!=-1
  (
    ; Micron (Numonyx) N25Q064A
    &FlashSize=0x800000
    &SectorSize=0x10000
  )
  ELSE
  (
    PRINT %ERROR "FLASH size of QSPI flash is unknown"
    ENDDO
  )

  FLASH.Create 10. 0x80000000++(&FlashSize-1) &SectorSize TARGET Byte

  FLASH.CreateALIAS 0x14000000--0x17FFFFFF 0x80000000

  FLASH.TARGET 0x10000000 0x10001000 0x2000 ~~/demo/arm/flash/byte/lpcspifi.bin /STACKSIZE 0x200

  RETURN