9484 lines
701 KiB
Plaintext
9484 lines
701 KiB
Plaintext
; --------------------------------------------------------------------------------
|
|
; @Title: CC3200 On-Chip Peripherals
|
|
; @Props: Released
|
|
; @Author: DLI, KOF, JMI
|
|
; @Changelog: 2019-11-29 JMI
|
|
; @Manufacturer: TI - Texas Instruments
|
|
; @Doc: cc3200.pdf (Rev. F, 2014-10)
|
|
; swru367d.pdf (Rev. D, 2018-06)
|
|
; @Core: Cortex-M4
|
|
; @Chip: CC3200
|
|
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
|
|
; --------------------------------------------------------------------------------
|
|
; $Id: percc3200.per 17736 2024-04-08 09:26:07Z kwisniewski $
|
|
|
|
; Known Problems:
|
|
; MODULE REGISTER DESCRIPTION
|
|
; MISC No base address for MISC module
|
|
; PCIM No base address for PCIM module
|
|
; CC_CTRL_DMA There are two fields at the same bit position
|
|
; DMA1_DISABLE is unclear due to "Only use DMA0"
|
|
; ADC No base address for ADC module
|
|
; DMA_CHS No base address for Micro DMA Channel Control Structure
|
|
tree.close "Core Registers (Cortex-M4)"
|
|
AUTOINDENT.PUSH
|
|
AUTOINDENT.OFF
|
|
tree "System Control"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 12.
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "ACTLR,Auxiliary Control Register"
|
|
bitfld.long 0x00 9. " DISFPCA ,Disables lazy stacking of floating point context" "No,Yes"
|
|
bitfld.long 0x00 8. " DISOOFP ,Disables floating point instructions completing" "No,Yes"
|
|
bitfld.long 0x00 2. " DISFOLD ,Disables folding of IT instructions" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 1. " DISDEFWBUF ,Disables write buffer use during default memory map accesses" "No,Yes"
|
|
bitfld.long 0x00 0. " DISMCYCINT ,Disables interruption of multi-cycle instructions" "No,Yes"
|
|
group.long 0x10++0x0B
|
|
line.long 0x00 "SYST_CSR,SysTick Control and Status Register"
|
|
rbitfld.long 0x00 16. " COUNTFLAG ,Counter Flag" "Not counted,Counted"
|
|
bitfld.long 0x00 2. " CLKSOURCE ,SysTick clock source" "External,Core"
|
|
bitfld.long 0x00 1. " TICKINT ,SysTick Handler" "No SysTick,SysTick"
|
|
textline " "
|
|
bitfld.long 0x00 0. " ENABLE ,Counter Enable" "Disabled,Enabled"
|
|
line.long 0x04 "SYST_RVR,SysTick Reload Value Register"
|
|
hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD ,The value to load into the SYST_CVR when the counter reaches 0"
|
|
line.long 0x08 "SYST_CVR,SysTick Current Value Register"
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "SYST_CALIB,SysTick Calibration Value Register"
|
|
bitfld.long 0x00 31. " NOREF ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented"
|
|
bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing"
|
|
rgroup.long 0xD00++0x03
|
|
line.long 0x00 "CPUID,CPU ID Base Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER ,Implementer Code"
|
|
bitfld.long 0x00 20.--23. " VARIANT ,Indicates processor revision" "Revision 0,?..."
|
|
bitfld.long 0x00 16.--19. " ARCHITECTURE ,Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
hexmask.long.word 0x00 4.--15. 1. " PARTNO ,Indicates part number"
|
|
bitfld.long 0x00 0.--3. " REVISION ,Indicates patch release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group.long 0xD04++0x23
|
|
line.long 0x00 "ICSR,Interrupt Control State Register"
|
|
bitfld.long 0x00 31. " NMIPENDSET ,Set Pending NMI Bit" "Inactive,Active"
|
|
bitfld.long 0x00 28. " PENDSVSET ,Set Pending pendSV Bit" "Not pending,Pending"
|
|
bitfld.long 0x00 27. " PENDSVCLR ,Removes the pending status of the PendSV exception" "No effect,Removed"
|
|
textline " "
|
|
bitfld.long 0x00 26. " PENDSTSET ,Set Pending SysTick Bit" "Not pending,Pending"
|
|
bitfld.long 0x00 25. " PENDSTCLR ,Clear Pending SysTick Bit" "No effect,Removed"
|
|
bitfld.long 0x00 23. " ISRPREEMPT ,Use Only at Debug Time" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 22. " ISRPENDING ,Indicates whether an external interrupt" "Not pending,Pending"
|
|
hexmask.long.word 0x00 12.--20. 1. " VECTPENDING ,Pending ISR Number Field"
|
|
bitfld.long 0x00 11. " RETTOBASE ,Interrupt Exception" "Active,Not active"
|
|
textline " "
|
|
hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE ,The exception number of the current executing exception"
|
|
line.long 0x04 "VTOR,Vector Table Offset Register"
|
|
hexmask.long 0x04 7.--31. 0x80 " TBLOFF ,Vector table address"
|
|
line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register"
|
|
hexmask.long.word 0x08 16.--31. 1. " VECTKEY ,Register Key"
|
|
rbitfld.long 0x08 15. " ENDIANESS ,Data endianness Bit" "Little,Big"
|
|
bitfld.long 0x08 8.--10. " PRIGROUP ,Interrupt Priority Grouping Field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
|
|
textline " "
|
|
bitfld.long 0x08 2. " SYSRESETREQ ,System Reset Request" "Not requested,Requested"
|
|
bitfld.long 0x08 1. " VECTCLRACTIVE ,Clear Active Vector Bit" "No effect,Clear"
|
|
bitfld.long 0x08 0. " VECTRESET ,System Reset" "No effect,Reset"
|
|
line.long 0x0C "SCR,System Control Register"
|
|
bitfld.long 0x0C 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup"
|
|
bitfld.long 0x0C 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep"
|
|
bitfld.long 0x0C 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled"
|
|
line.long 0x10 "CCR,Configuration Control Register"
|
|
bitfld.long 0x10 18. " BP ,Branch prediction enable bit" "Disabled,Enabled"
|
|
bitfld.long 0x10 17. " IC ,Instruction cache enable bit" "Disabled,Enabled"
|
|
bitfld.long 0x10 16. " DC ,Cache enable bit" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 9. " STKALIGN ,8-byte Stack Frame Alignment" "4-byte/no adjustment,8-byte/adjustment"
|
|
bitfld.long 0x10 8. " BFHFNMIGN ,Enable NMI and Hard Fault and FAULTMASK to Ignore Bus Fault" "Disabled,Enabled"
|
|
bitfld.long 0x10 4. " DIV_0_TRP ,Trap Divide by Zero" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 3. " UNALIGN_TRP ,Trap for Unaligned Access" "Disabled,Enabled"
|
|
bitfld.long 0x10 1. " USERSETMPEND ,Controls whether unprivileged software can access the STIR" "Denied,Allowed"
|
|
bitfld.long 0x10 0. " NONEBASETHRDENA ,Control Entry to Thread Mode" "Only from last exception,Any level"
|
|
line.long 0x14 "SHPR1,SSystem Handler Priority Register 1"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_7 ,Priority of System Handler 7"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_6 ,Priority of system handler 6(UsageFault)"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_5 ,Priority of system handler 5(BusFault)"
|
|
textline " "
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_4 ,Priority of system handler 4(MemManage)"
|
|
line.long 0x18 "SHPR2,System Handler Priority Register 2"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_11 ,Priority of system handler 11(SVCall)"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_10 ,Priority of System Handler 10"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_9 ,Priority of System Handler 9"
|
|
textline " "
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_8 ,Priority of System Handler 8"
|
|
line.long 0x1C "SHPR3,System Handler Priority Register 3"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_15 ,Priority of System Handler 15(SysTick)"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_14 ,Priority of System Handler 14(PendSV)"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_13 ,Priority of System Handler 13"
|
|
textline " "
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_12 ,Priority of System Handler 12(DebugMonitor)"
|
|
line.long 0x20 "SHCSR,System Handler Control and State Register"
|
|
bitfld.long 0x20 18. " USGFAULTENA ,Enable UsageFault" "Disabled,Enabled"
|
|
bitfld.long 0x20 17. " BUSFAULTENA ,Enable BusFault" "Disabled,Enabled"
|
|
bitfld.long 0x20 16. " MEMFAULTENA ,Enable MemManage fault" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 15. " SVCALLPENDED ,SVCall is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 14. " BUSFAULTPENDED ,BusFault is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 13. " MEMFAULTPENDED ,MemManage is pending" "Not pending,Pending"
|
|
textline " "
|
|
bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 11. " SYSTICKACT ,SysTick is Active" "Not active,Active"
|
|
bitfld.long 0x20 10. " PENDSVACT ,PendSV is Active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x20 8. " MONITORACT ,Monitor is Active" "Not active,Active"
|
|
bitfld.long 0x20 7. " SVCALLACT ,SVCall is Active" "Not active,Active"
|
|
bitfld.long 0x20 3. " USGFAULTACT ,UsageFault is Active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x20 1. " BUSFAULTACT ,BusFault is Active" "Not active,Active"
|
|
bitfld.long 0x20 0. " MEMFAULTACT ,MemManage is Active" "Not active,Active"
|
|
group.byte 0xD28++0x1
|
|
line.byte 0x00 "MMFSR,MemManage Status Register"
|
|
bitfld.byte 0x00 7. " MMARVALID ,Address Valid Flag" "Not valid,Valid"
|
|
bitfld.byte 0x00 5. " MLSPERR ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 4. " MSTKERR ,tacking Access Violations" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x00 3. " MUNSTKERR ,Unstack Access Violations" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 1. " DACCVIOL ,Data Access Violation" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 0. " IACCVIOL ,Instruction Access Violation" "Not occurred,Occurred"
|
|
line.byte 0x01 "BFSR,Bus Fault Status Register"
|
|
bitfld.byte 0x01 7. " BFARVALID ,Address Valid Flag" "Not valid,Valid"
|
|
bitfld.byte 0x01 5. " LSPERR ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 4. " STKERR ,Derived bus fault(exception entry)" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x01 3. " UNSTKERR ,Derived bus fault(exception return)" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 2. " IMPRECISERR ,Imprecise data access error" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 1. " PRECISERR ,Precise data access error" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x01 0. " IBUSERR ,Bus fault on an instruction prefetch" "Not occurred,Occurred"
|
|
group.word 0xD2A++0x1
|
|
line.word 0x00 "USAFAULT,Usage Fault Status Register"
|
|
bitfld.word 0x00 9. " DIVBYZERO ,Divide by zero error" "No error,Error"
|
|
bitfld.word 0x00 8. " UNALIGNED ,Unaligned access error" "No error,Error"
|
|
bitfld.word 0x00 3. " NOCP ,A coprocessor access error" "No error,Error"
|
|
textline " "
|
|
bitfld.word 0x00 2. " INVPC ,An integrity check error" "No error,Error"
|
|
bitfld.word 0x00 1. " INVSTATE ,Invalid Combination of EPSR and Instruction" "No error,Error"
|
|
bitfld.word 0x00 0. " UNDEFINSTR ,Undefined instruction error" "No error,Error"
|
|
group.long 0xD2C++0x07
|
|
line.long 0x00 "HFSR,Hard Fault Status Register"
|
|
bitfld.long 0x00 31. " DEBUGEVT ,Indicates when a Debug event has occurred" "Not occurred,Occurred"
|
|
bitfld.long 0x00 30. " FORCED ,Indicates that a fault with configurable priority" "Not occurred,Occurred"
|
|
bitfld.long 0x00 1. " VECTTBL ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred"
|
|
line.long 0x04 "DFSR,Debug Fault Status Register"
|
|
bitfld.long 0x04 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of EDBGRQ" "Not asserted,Asserted"
|
|
bitfld.long 0x04 3. " VCATCH ,Vector Catch Flag" "Not occurred,Occurred"
|
|
bitfld.long 0x04 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.long 0x04 1. " BKPT ,BKPT Flag" "Not executed,Executed"
|
|
bitfld.long 0x04 0. " HALTED ,Indicates a debug event generated by either" "Not requested,Requested"
|
|
group.long 0xD34++0x0B
|
|
line.long 0x00 "MMFAR,MemManage Fault Address Register"
|
|
line.long 0x04 "BFAR,BusFault Address Register"
|
|
line.long 0x08 "AFSR,Auxiliary Fault Status Register"
|
|
group.long 0xD88++0x03
|
|
line.long 0x00 "CPACR,Coprocessor Access Control Register"
|
|
bitfld.long 0x00 22.--23. " CP11 ,Access privileges for coprocessor 11" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 20.--21. " CP10 ,Access privileges for coprocessor 10" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 14.--15. " CP7 ,Access privileges for coprocessor 7" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " CP6 ,Access privileges for coprocessor 6" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 10.--11. " CP5 ,Access privileges for coprocessor 5" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 8.--9. " CP4 ,Access privileges for coprocessor 4" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 6.--7. " CP3 ,Access privileges for coprocessor 3" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 4.--5. " CP2 ,Access privileges for coprocessor 2" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 2.--3. " CP1 ,Access privileges for coprocessor 1" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 0.--1. " CP0 ,Access privileges for coprocessor 0" "Access denied,Privileged only,Reserved,Full access"
|
|
wgroup.long 0xF00++0x03
|
|
line.long 0x00 "STIR,Software Trigger Interrupt Register"
|
|
hexmask.long.word 0x00 0.--8. 1. " INTID ,Indicates the interrupt to be triggered"
|
|
width 10.
|
|
tree "Feature Registers"
|
|
rgroup.long 0xD40++0x0B
|
|
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
|
|
bitfld.long 0x00 4.--7. " STATE1 ,Thumb instruction set support" ",,,Supported,?..."
|
|
bitfld.long 0x00 0.--3. " STATE0 ,ARM instruction set support" "Not supported,?..."
|
|
line.long 0x04 "ID_PFR1,Processor Feature Register 1"
|
|
bitfld.long 0x04 8.--11. " MPROF ,M profile programmers' model" ",,2-stack,?..."
|
|
line.long 0x08 "ID_DFR0,Debug Feature Register 0"
|
|
bitfld.long 0x08 20.--23. " DBGMOD ,Support for memory-mapped debug model for M profile processors" "Not supported,Supported,?..."
|
|
hgroup.long 0xD4C++0x03
|
|
hide.long 0x00 "ID_AFR0,Auxiliary Feature Register 0"
|
|
rgroup.long 0xD50++0x03
|
|
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
|
|
bitfld.long 0x00 20.--23. " AUXREG ,Indicates the support for Auxiliary registers" "Not supported,ACTLR only,?..."
|
|
bitfld.long 0x00 16.--19. " TCMSUP ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..."
|
|
bitfld.long 0x00 12.--15. " SHRLEV ,Indicates the number of shareability levels implemented" "Level 1,?..."
|
|
textline " "
|
|
bitfld.long 0x00 8.--11. " OUTMSHR ,Indicates the outermost shareability domain implemented" "Non-cacheable,,,,,,,,,,,,,,,Ignored"
|
|
bitfld.long 0x00 4.--7. " PMSASUP ,Indicates support for a PMSA" "Not supported,,,PMSAv7,?..."
|
|
hgroup.long 0xD54++0x03
|
|
hide.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
|
|
rgroup.long 0xD58++0x03
|
|
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
|
|
bitfld.long 0x00 24.--27. " WFISTALL ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..."
|
|
rgroup.long 0xD60++0x13
|
|
line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0"
|
|
bitfld.long 0x00 24.--27. " DIVIDE ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..."
|
|
bitfld.long 0x00 20.--23. " DEBUG ,Indicates the supported debug instructions" "Not supported,BKPT,?..."
|
|
bitfld.long 0x00 16.--19. " COPROC ,Indicates the supported coprocessor instructions" "Not supported,CDP/LDC/MCR/STC,CDP2/LDC2/MCR2/STC2,MCRR/MRRC,MCRR2/MRRC2,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..."
|
|
bitfld.long 0x00 8.--11. " BITFIELD ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..."
|
|
bitfld.long 0x00 4.--7. " BITCOUNT ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..."
|
|
line.long 0x04 "ID_ISAR1,Instruction Set Attributes Register 1"
|
|
bitfld.long 0x04 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..."
|
|
bitfld.long 0x04 20.--23. " IMMEDIATE ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..."
|
|
bitfld.long 0x04 16.--19. " IFTHEN ,Indicates the supported IfThen instructions" "Not supported,IT,?..."
|
|
textline " "
|
|
bitfld.long 0x04 12.--15. " EXTEND ,Indicates the supported Extend instructions" "Not supported,Supported,Supported,?..."
|
|
line.long 0x08 "ID_ISAR2,Instruction Set Attributes Register 2"
|
|
bitfld.long 0x08 24.--27. " REVERSAL ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..."
|
|
bitfld.long 0x08 20.--23. " MULTU ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..."
|
|
bitfld.long 0x08 16.--19. " MULTS ,Indicates the supported advanced signed multiply instructions" "Not supported,Supported,Supported,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x08 12.--15. " MULT ,Indicates the supported additional multiply instructions" "Not supported,MLA,MLA/MLS,?..."
|
|
bitfld.long 0x08 8.--11. " MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..."
|
|
bitfld.long 0x08 4.--7. " MEMHINT ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..."
|
|
textline " "
|
|
bitfld.long 0x08 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,LDRD/STRD,?..."
|
|
line.long 0x0C "ID_ISAR3,Instruction Set Attributes Register 3"
|
|
bitfld.long 0x0C 24.--27. " TRUENOP ,Indicates the support for a true NOP instruction" "Not supported,Supported,?..."
|
|
bitfld.long 0x0C 20.--23. " THUMBCOPY ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..."
|
|
bitfld.long 0x0C 16.--19. " TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,Supported,Supported,?..."
|
|
bitfld.long 0x0C 8.--11. " SVC ,Indicates the supported SVC instructions" "Not supported,SVC,?..."
|
|
bitfld.long 0x0C 4.--7. " SIMD ,Indicates the supported SIMD instructions" "Not supported,Supported,,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 0.--3. " SATURATE ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB,?..."
|
|
line.long 0x10 "ID_ISAR4,Instruction Set Attributes Register 4"
|
|
bitfld.long 0x10 24.--27. " PSR_M ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,?..."
|
|
bitfld.long 0x10 20.--23. " SYNCHPRIMFRAC ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,Supported,Supported,?..."
|
|
bitfld.long 0x10 16.--19. " BARRIER ,Indicates the supported Barrier instructions" "Not supported,DMB/DSB/ISB,?..."
|
|
textline " "
|
|
bitfld.long 0x10 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..."
|
|
bitfld.long 0x10 4.--7. " WITHSHIFTS ,Indicates the support for instructions with shifts" "MOV/shift,Shift LSL 0-3,,Shift other,?..."
|
|
bitfld.long 0x10 0.--3. " UNPRIV ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,LDRBT/LDRT/STRBT/STRT/LDRHT/LDRSBT/LDRSHTSTRHT,?..."
|
|
tree.end
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0C "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0C "CID3,Component ID3"
|
|
tree.end
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Memory Protection Unit"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 15.
|
|
rgroup.long 0xD90++0x03
|
|
line.long 0x00 "MPU_TYPE,MPU Type Register"
|
|
bitfld.long 0x00 16.--23. " IREGION ,Instruction region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
|
|
bitfld.long 0x00 8.--15. " DREGION ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
|
|
bitfld.long 0x00 0. " SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,Supported"
|
|
group.long 0xD94++0x03
|
|
line.long 0x00 "MPU_CTRL,MPU Control Register"
|
|
bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " HFNMIENA ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables the MPU" "Disabled,Enabled"
|
|
group.long 0xD98++0x03
|
|
line.long 0x00 "MPU_RNR,MPU Region Number Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " REGION ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR"
|
|
tree.close "MPU regions"
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0
|
|
group.long 0xD9C++0x03 "Region 0"
|
|
saveout 0xD98 %l 0x0
|
|
line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x0
|
|
line.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 0 (not implemented)"
|
|
saveout 0xD98 %l 0x0
|
|
hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x0
|
|
hide.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1
|
|
group.long 0xD9C++0x03 "Region 1"
|
|
saveout 0xD98 %l 0x1
|
|
line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x1
|
|
line.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 1 (not implemented)"
|
|
saveout 0xD98 %l 0x1
|
|
hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x1
|
|
hide.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2
|
|
group.long 0xD9C++0x03 "Region 2"
|
|
saveout 0xD98 %l 0x2
|
|
line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x2
|
|
line.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 2 (not implemented)"
|
|
saveout 0xD98 %l 0x2
|
|
hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x2
|
|
hide.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3
|
|
group.long 0xD9C++0x03 "Region 3"
|
|
saveout 0xD98 %l 0x3
|
|
line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x3
|
|
line.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 3 (not implemented)"
|
|
saveout 0xD98 %l 0x3
|
|
hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x3
|
|
hide.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4
|
|
group.long 0xD9C++0x03 "Region 4"
|
|
saveout 0xD98 %l 0x4
|
|
line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x4
|
|
line.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 4 (not implemented)"
|
|
saveout 0xD98 %l 0x4
|
|
hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x4
|
|
hide.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5
|
|
group.long 0xD9C++0x03 "Region 5"
|
|
saveout 0xD98 %l 0x5
|
|
line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x5
|
|
line.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 5 (not implemented)"
|
|
saveout 0xD98 %l 0x5
|
|
hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x5
|
|
hide.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6
|
|
group.long 0xD9C++0x03 "Region 6"
|
|
saveout 0xD98 %l 0x6
|
|
line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x6
|
|
line.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 6 (not implemented)"
|
|
saveout 0xD98 %l 0x6
|
|
hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x6
|
|
hide.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7
|
|
group.long 0xD9C++0x03 "Region 7"
|
|
saveout 0xD98 %l 0x7
|
|
line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x7
|
|
line.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 7 (not implemented)"
|
|
saveout 0xD98 %l 0x7
|
|
hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x7
|
|
hide.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8
|
|
group.long 0xD9C++0x03 "Region 8"
|
|
saveout 0xD98 %l 0x8
|
|
line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x8
|
|
line.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 8 (not implemented)"
|
|
saveout 0xD98 %l 0x8
|
|
hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x8
|
|
hide.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9
|
|
group.long 0xD9C++0x03 "Region 9"
|
|
saveout 0xD98 %l 0x9
|
|
line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x9
|
|
line.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 9 (not implemented)"
|
|
saveout 0xD98 %l 0x9
|
|
hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x9
|
|
hide.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA
|
|
group.long 0xD9C++0x03 "Region 10"
|
|
saveout 0xD98 %l 0xA
|
|
line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xA
|
|
line.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 10 (not implemented)"
|
|
saveout 0xD98 %l 0xA
|
|
hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xA
|
|
hide.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB
|
|
group.long 0xD9C++0x03 "Region 11"
|
|
saveout 0xD98 %l 0xB
|
|
line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xB
|
|
line.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 11 (not implemented)"
|
|
saveout 0xD98 %l 0xB
|
|
hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xB
|
|
hide.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC
|
|
group.long 0xD9C++0x03 "Region 12"
|
|
saveout 0xD98 %l 0xC
|
|
line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xC
|
|
line.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 12 (not implemented)"
|
|
saveout 0xD98 %l 0xC
|
|
hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xC
|
|
hide.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD
|
|
group.long 0xD9C++0x03 "Region 13"
|
|
saveout 0xD98 %l 0xD
|
|
line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xD
|
|
line.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 13 (not implemented)"
|
|
saveout 0xD98 %l 0xD
|
|
hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xD
|
|
hide.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE
|
|
group.long 0xD9C++0x03 "Region 14"
|
|
saveout 0xD98 %l 0xE
|
|
line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xE
|
|
line.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 14 (not implemented)"
|
|
saveout 0xD98 %l 0xE
|
|
hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xE
|
|
hide.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF
|
|
group.long 0xD9C++0x03 "Region 15"
|
|
saveout 0xD98 %l 0xF
|
|
line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xF
|
|
line.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 15 (not implemented)"
|
|
saveout 0xD98 %l 0xF
|
|
hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xF
|
|
hide.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
tree.end
|
|
width 0x0b
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Nested Vectored Interrupt Controller"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 6.
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "ICTR,Interrupt Controller Type Register"
|
|
bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,33-64,65-96,97-128,129-160,161-192,193-224,225-240,?..."
|
|
tree "Interrupt Enable Registers"
|
|
width 23.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x100++0x03
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x100++0x7
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x100++0x0B
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x100++0x0F
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x100++0x13
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x100++0x17
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x100++0x1B
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x100++0x1F
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0x100++0x1F
|
|
hide.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Pending Registers"
|
|
width 23.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x200++0x07
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x200++0x0B
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x200++0x0F
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x200++0x13
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x200++0x17
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x200++0x1B
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x200++0x1F
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
else
|
|
hgroup.long 0x200++0x1F
|
|
hide.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Active Bit Registers"
|
|
width 9.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
rgroup.long 0x300++0x03
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
rgroup.long 0x300++0x07
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
rgroup.long 0x300++0x0B
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
rgroup.long 0x300++0x0F
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
rgroup.long 0x300++0x13
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
rgroup.long 0x300++0x17
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
rgroup.long 0x300++0x1B
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
rgroup.long 0x300++0x1F
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x1c "ACTIVE8,Active Bit Register 8"
|
|
bitfld.long 0x1c 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 14. " ACTIVE238 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 13. " ACTIVE237 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 12. " ACTIVE236 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 11. " ACTIVE235 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 10. " ACTIVE234 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x1c 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 8. " ACTIVE232 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 7. " ACTIVE231 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 6. " ACTIVE230 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 5. " ACTIVE229 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 4. " ACTIVE228 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x1c 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 2. " ACTIVE226 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 1. " ACTIVE225 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 0. " ACTIVE224 ,Interrupt Active Flag" "Not active,Active"
|
|
else
|
|
hgroup.long 0x300++0x1F
|
|
hide.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
hide.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
hide.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
hide.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
hide.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
hide.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
hide.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
hide.long 0x1c "ACTIVE8,Active Bit Register 8"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Priority Registers"
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x400++0x1F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x400++0x3F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x400++0x5F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x400++0x7F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x400++0x9F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x400++0xBF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x400++0xDF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
line.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
|
|
hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority"
|
|
hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority"
|
|
hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority"
|
|
line.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
|
|
hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority"
|
|
hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority"
|
|
hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority"
|
|
line.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
|
|
hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority"
|
|
hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority"
|
|
hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority"
|
|
line.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
|
|
hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority"
|
|
hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority"
|
|
hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority"
|
|
line.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
|
|
hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority"
|
|
hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority"
|
|
hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority"
|
|
line.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
|
|
hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority"
|
|
hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority"
|
|
hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority"
|
|
line.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
|
|
hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority"
|
|
hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority"
|
|
hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority"
|
|
line.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
|
|
hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority"
|
|
hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority"
|
|
hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x400++0xEF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
line.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
|
|
hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority"
|
|
hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority"
|
|
hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority"
|
|
line.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
|
|
hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority"
|
|
hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority"
|
|
hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority"
|
|
line.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
|
|
hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority"
|
|
hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority"
|
|
hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority"
|
|
line.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
|
|
hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority"
|
|
hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority"
|
|
hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority"
|
|
line.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
|
|
hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority"
|
|
hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority"
|
|
hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority"
|
|
line.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
|
|
hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority"
|
|
hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority"
|
|
hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority"
|
|
line.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
|
|
hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority"
|
|
hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority"
|
|
hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority"
|
|
line.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
|
|
hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority"
|
|
hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority"
|
|
hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority"
|
|
line.long 0xE0 "IPR56,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority"
|
|
hexmask.long.byte 0xE0 16.--23. 1. " PRI_226 ,Interrupt 226 Priority"
|
|
hexmask.long.byte 0xE0 8.--15. 1. " PRI_225 ,Interrupt 225 Priority"
|
|
hexmask.long.byte 0xE0 0.--7. 1. " PRI_224 ,Interrupt 224 Priority"
|
|
line.long 0xE4 "IPR57,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority"
|
|
hexmask.long.byte 0xE4 16.--23. 1. " PRI_230 ,Interrupt 230 Priority"
|
|
hexmask.long.byte 0xE4 8.--15. 1. " PRI_229 ,Interrupt 229 Priority"
|
|
hexmask.long.byte 0xE4 0.--7. 1. " PRI_228 ,Interrupt 228 Priority"
|
|
line.long 0xE8 "IPR58,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority"
|
|
hexmask.long.byte 0xE8 16.--23. 1. " PRI_234 ,Interrupt 234 Priority"
|
|
hexmask.long.byte 0xE8 8.--15. 1. " PRI_233 ,Interrupt 233 Priority"
|
|
hexmask.long.byte 0xE8 0.--7. 1. " PRI_232 ,Interrupt 232 Priority"
|
|
line.long 0xEC "IPR59,Interrupt Priority Register"
|
|
hexmask.long.byte 0xEC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority"
|
|
hexmask.long.byte 0xEC 16.--23. 1. " PRI_238 ,Interrupt 238 Priority"
|
|
hexmask.long.byte 0xEC 8.--15. 1. " PRI_237 ,Interrupt 237 Priority"
|
|
hexmask.long.byte 0xEC 0.--7. 1. " PRI_236 ,Interrupt 236 Priority"
|
|
else
|
|
hgroup.long 0x400++0xEF
|
|
hide.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hide.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hide.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hide.long 0xC "IPR3,Interrupt Priority Register"
|
|
hide.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hide.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hide.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hide.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hide.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hide.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hide.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hide.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hide.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hide.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hide.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hide.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hide.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hide.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hide.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hide.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hide.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hide.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hide.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hide.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hide.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hide.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hide.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hide.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hide.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hide.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hide.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hide.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hide.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hide.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hide.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hide.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hide.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hide.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hide.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hide.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hide.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hide.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hide.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hide.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hide.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hide.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hide.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hide.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hide.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hide.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hide.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hide.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hide.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hide.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hide.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hide.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hide.long 0xE0 "IPR56,Interrupt Priority Register"
|
|
hide.long 0xE4 "IPR57,Interrupt Priority Register"
|
|
hide.long 0xE8 "IPR58,Interrupt Priority Register"
|
|
hide.long 0xEC "IPR59,Interrupt Priority Register"
|
|
endif
|
|
tree.end
|
|
width 0x0b
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
sif CORENAME()=="CORTEXM4F"
|
|
tree "Floating-point Unit (FPU)"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 8.
|
|
group.long 0xF34++0x0B
|
|
line.long 0x00 "FPCCR,Floating-Point Context Control Register"
|
|
bitfld.long 0x00 31. " ASPEN ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " LSPEN ,Enables lazy context save of FP state" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " MONRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able"
|
|
textline " "
|
|
bitfld.long 0x00 6. " BFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able"
|
|
bitfld.long 0x00 5. " MMRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able"
|
|
bitfld.long 0x00 4. " HFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able"
|
|
textline " "
|
|
bitfld.long 0x00 3. " THREAD ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread"
|
|
bitfld.long 0x00 1. " USER ,Indicates the privilege level of the software executing" "Privileged,Unprivileged"
|
|
bitfld.long 0x00 0. " LSPACT ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active"
|
|
line.long 0x04 "FPCAR,Floating-Point Context Address Register"
|
|
hexmask.long 0x04 3.--31. 0x8 " ADDRESS ,The location of the unpopulated floating-point register space allocated on an exception stack frame"
|
|
line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register"
|
|
bitfld.long 0x08 26. " AHP ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative"
|
|
bitfld.long 0x08 25. " DN ,Default value for FPSCR.DN" "NaN operands,Any operation"
|
|
bitfld.long 0x08 24. " FZ ,Default value for FPSCR.FZ" "No Flush mode,Flush mode"
|
|
textline " "
|
|
bitfld.long 0x08 22.--23. " RMODE ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero"
|
|
rgroup.long 0xF40++0x07
|
|
line.long 0x00 "MVFR0,Media and FP Feature Register 0"
|
|
bitfld.long 0x00 28.--31. " FPRNDMOD ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..."
|
|
bitfld.long 0x00 24.--27. " SRTERR ,Indicates the hardware support for FP short vectors" "Not supported,?..."
|
|
bitfld.long 0x00 20.--23. " SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x00 16.--19. " DIV ,Indicates the hardware support for FP divide operations" ",Supported,?..."
|
|
bitfld.long 0x00 12.--15. " FPEXTRP ,Indicates whether the FP hardware implementation supports exception trapping" "Not supported,?..."
|
|
bitfld.long 0x00 8.--11. " DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " SNGLPREC ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..."
|
|
bitfld.long 0x00 0.--3. " A_SIMD ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..."
|
|
line.long 0x04 "MVFR1,Media and FP Feature Register 1"
|
|
bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..."
|
|
bitfld.long 0x04 24.--27. " FP_HPFP ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..."
|
|
textline " "
|
|
bitfld.long 0x04 4.--7. " D_NAN ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..."
|
|
bitfld.long 0x04 0.--3. " FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Full denorm. num. arit.,?..."
|
|
width 0xB
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
endif
|
|
tree "Debug"
|
|
tree "Core Debug"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 7.
|
|
group.long 0xD30++0x03
|
|
line.long 0x00 "DFSR,Debug Fault Status Register"
|
|
eventfld.long 0x00 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated"
|
|
eventfld.long 0x00 3. " VCATCH ,Indicates triggering of a Vector catch" "Not triggered,Triggered"
|
|
eventfld.long 0x00 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not generated,Generated"
|
|
newline
|
|
eventfld.long 0x00 1. " BKPT ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated"
|
|
eventfld.long 0x00 0. " HALTED ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated"
|
|
newline
|
|
hgroup.long 0xDF0++0x03
|
|
hide.long 0x00 "DHCSR,Debug Halting Control and Status Register"
|
|
in
|
|
newline
|
|
wgroup.long 0xDF4++0x03
|
|
line.long 0x00 "DCRSR,Debug Core Register Selector Register"
|
|
bitfld.long 0x00 16. " REGWNR ,Register Read/Write" "Read,Write"
|
|
hexmask.long.byte 0x00 0.--6. 1. " REGSEL ,Specifies the ARM core register or special-purpose register or Floating-point extension register"
|
|
group.long 0xDF8++0x03
|
|
line.long 0x00 "DCRDR,Debug Core Register Data Register"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000)
|
|
group.long 0xDFC++0x03
|
|
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
|
|
bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1"
|
|
bitfld.long 0x00 18. " MON_STEP ,Setting this bit to 1 makes the step request pending" "No step,Step"
|
|
newline
|
|
bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
|
|
bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
|
|
else
|
|
group.long 0xDFC++0x03
|
|
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
|
|
bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1"
|
|
newline
|
|
bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
|
|
bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Flash Patch and Breakpoint Unit (FPB)"
|
|
sif COMPonent.AVAILABLE("FPB")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))
|
|
width 10.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "FP_CTRL,Flash Patch Control Register"
|
|
bitfld.long 0x00 28.--31. " REV ,Flash Patch Breakpoint architecture revision" "Version 1,Version 2,?..."
|
|
rbitfld.long 0x00 4.--7. 12.--14. " NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127"
|
|
bitfld.long 0x00 1. " KEY ,Key Field" "Low,High"
|
|
bitfld.long 0x00 0. " ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled"
|
|
textline ""
|
|
line.long 0x04 "FP_REMAP,Flash Patch Remap Register"
|
|
bitfld.long 0x04 29. " RMPSPT ,Indicates whether the FPB unit supports flash patch remap" "Not supported,SRAM region"
|
|
hexmask.long.tbyte 0x04 5.--28. 0x20 " REMAP ,Remap Base Address Field"
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00)
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00)
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00)
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00)
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00)
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00)
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00)
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00)
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0c "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0c "CID3,Component ID3"
|
|
tree.end
|
|
width 0xB
|
|
else
|
|
newline
|
|
textline "FPB component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Data Watchpoint and Trace Unit (DWT)"
|
|
sif COMPonent.AVAILABLE("DWT")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))
|
|
width 15.
|
|
group.long 0x00++0x1B
|
|
line.long 0x00 "DWT_CTRL,Control Register"
|
|
rbitfld.long 0x00 28.--31. " NUMCOMP ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
rbitfld.long 0x00 27. " NOTRCPKT ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported"
|
|
rbitfld.long 0x00 26. " NOEXTTRIG ,Shows whether the implementation includes external match signals" "Supported,Not supported"
|
|
textline " "
|
|
rbitfld.long 0x00 25. " NOCYCCNT ,Shows whether the implementation supports a cycle counter" "Supported,Not supported"
|
|
rbitfld.long 0x00 24. " NOPRFCNT ,Shows whether the implementation supports the profiling counters" "Supported,Not supported"
|
|
bitfld.long 0x00 22. " CYCEVTENA ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 21. " FOLDEVTENA ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " LSUEVTENA ,Enables generation of the LSU counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 18. " EXCEVTENA ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " CPIEVTENA ,Enables generation of the CPI counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " EXCTRCENA ,Enables generation of exception trace" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 12. " PCSAMPLEENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled"
|
|
bitfld.long 0x00 10.--11. " SYNCTAP ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]"
|
|
bitfld.long 0x00 9. " CYCTAP ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]"
|
|
textline " "
|
|
bitfld.long 0x00 5.--8. " POSTINIT ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 1.--4. " POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 0. " CYCCNTENA ,Enables CYCCNT" "Disabled,Enabled"
|
|
line.long 0x04 "DWT_CYCCNT,Cycle Count Register"
|
|
line.long 0x08 "DWT_CPICNT,CPI Count Register"
|
|
hexmask.long.byte 0x08 0.--7. 1. " CPICNT ,The base CPI counter"
|
|
line.long 0x0c "DWT_EXCCNT,Exception Overhead Count Register"
|
|
hexmask.long.byte 0x0c 0.--7. 1. " EXCCNT ,The exception overhead counter"
|
|
line.long 0x10 "DWT_SLEEPCNT,Sleep Count Register"
|
|
hexmask.long.byte 0x10 0.--7. 1. " SLEEPCNT ,Sleep Counter"
|
|
line.long 0x14 "DWT_LSUCNT,LSU Count Register"
|
|
hexmask.long.byte 0x14 0.--7. 1. " LSUCNT ,Load-store counter"
|
|
line.long 0x18 "DWT_FOLDCNT,Folded-instruction Count Register"
|
|
hexmask.long.byte 0x18 0.--7. 1. " FOLDCNT ,Folded-instruction counter"
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "DWT_PCSR,Program Counter Sample register"
|
|
textline " "
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "DWT_COMP0,DWT Comparator Register 0"
|
|
line.long 0x04 "DWT_MASK0,DWT Mask Registers 0"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x20)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x00)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x180)==0x80)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet,UNPREDICTABLE,UNPREDICTABLE,Generate watchpoint debug event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,CMPMATCH[N] event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
else
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x30)++0x07
|
|
line.long 0x00 "DWT_COMP1,DWT Comparator Register 1"
|
|
line.long 0x04 "DWT_MASK1,DWT Mask Registers 1"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x20)
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x00)
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x40)++0x07
|
|
line.long 0x00 "DWT_COMP2,DWT Comparator Register 2"
|
|
line.long 0x04 "DWT_MASK2,DWT Mask Registers 2"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x20)
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x00)
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x50)++0x07
|
|
line.long 0x00 "DWT_COMP3,DWT Comparator Register 3"
|
|
line.long 0x04 "DWT_MASK3,DWT Mask Registers 3"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x20)
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x00)
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0c "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0c "CID3,Component ID3"
|
|
tree.end
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "DWT component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree.end
|
|
AUTOINDENT.POP
|
|
tree.end
|
|
config 16. 8.
|
|
tree "Direct Memory Access (DMA)"
|
|
; tree "uDMA Channel Control Structure"
|
|
; base ad:0x00
|
|
; %include cc3200/dma_chs.ph
|
|
; tree.end
|
|
tree "DMA"
|
|
base ad:0x400FF000
|
|
width 18.
|
|
rgroup.long 0x00++0x03
|
|
line.long 0x00 "STAT,DMA Status Register"
|
|
bitfld.long 0x00 16.--20. " DMACHANS ,Available DMA Channels" "1 channel,2 channels,3 channels,4 channels,5 channels,6 channels,7 channels,8 channels,9 channels,10 channels,11 channels,12 channels,13 channels,14 channels,15 channels,16 channels,17 channels,18 channels,19 channels,20 channels,21 channels,22 channels,23 channels,24 channels,25 channels,26 channels,27 channels,28 channels,29 channels,30 channels,31 channels,?..."
|
|
bitfld.long 0x00 4.--7. " STATE ,Control state machine status" "Idle,Reading channel controller data,Reading source end pointer,Reading destination end pointer,Reading source data,Writing destination data,Waiting for DMA request to clear,Writing channel controller data,Stalled,Done,?..."
|
|
bitfld.long 0x00 0. " MASTEN ,Master enable status" "Disabled,Enabled"
|
|
wgroup.long 0x04++0x03
|
|
line.long 0x00 "CFG,DMA Configuration Register"
|
|
bitfld.long 0x00 0. " MASTEN ,Controller master enable" "Disabled,Enabled"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "CTLBASE,Channel Control Base Pointer Register"
|
|
hexmask.long.tbyte 0x00 10.--31. 0x04 " ADDR ,Channel control base address"
|
|
rgroup.long 0x0C++0x07
|
|
line.long 0x00 "ALTBASE,DMA Alternate Channel Control Base Pointer Register"
|
|
line.long 0x04 "WAITSTAT,DMA Channel Wait-on-Request Status Pointer"
|
|
bitfld.long 0x04 31. " WAITREQ[31] ,Channel [31] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 30. " [30] ,Channel [30] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 29. " [29] ,Channel [29] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 28. " [28] ,Channel [28] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 27. " [27] ,Channel [27] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 26. " [26] ,Channel [26] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 25. " [25] ,Channel [25] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 24. " [24] ,Channel [24] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 23. " [23] ,Channel [23] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 22. " [22] ,Channel [22] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 21. " [21] ,Channel [21] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 20. " [20] ,Channel [20] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 19. " [19] ,Channel [19] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 18. " [18] ,Channel [18] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 17. " [17] ,Channel [17] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 16. " [16] ,Channel [16] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 15. " [15] ,Channel [15] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 14. " [14] ,Channel [14] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 13. " [13] ,Channel [13] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 12. " [12] ,Channel [12] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 11. " [11] ,Channel [11] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 10. " [10] ,Channel [10] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 9. " [9] ,Channel [9] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 8. " [8] ,Channel [8] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 7. " [7] ,Channel [7] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 6. " [6] ,Channel [6] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 5. " [5] ,Channel [5] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 4. " [4] ,Channel [4] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 3. " [3] ,Channel [3] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 2. " [2] ,Channel [2] wait status" "Not waiting,Waiting"
|
|
newline
|
|
bitfld.long 0x04 1. " [1] ,Channel [1] wait status" "Not waiting,Waiting"
|
|
bitfld.long 0x04 0. " [0] ,Channel [0] wait status" "Not waiting,Waiting"
|
|
wgroup.long 0x14++0x03
|
|
line.long 0x00 "SWREQ,DMA Channel Software Request Register"
|
|
bitfld.long 0x00 31. " SWREQ[31] ,Channel [31] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 30. " [30] ,Channel [30] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 29. " [29] ,Channel [29] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 28. " [28] ,Channel [28] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 27. " [27] ,Channel [27] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 26. " [26] ,Channel [26] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 25. " [25] ,Channel [25] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 24. " [24] ,Channel [24] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 23. " [23] ,Channel [23] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 22. " [22] ,Channel [22] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 21. " [21] ,Channel [21] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 20. " [20] ,Channel [20] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 19. " [19] ,Channel [19] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 18. " [18] ,Channel [18] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 17. " [17] ,Channel [17] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 16. " [16] ,Channel [16] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 15. " [15] ,Channel [15] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 14. " [14] ,Channel [14] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 13. " [13] ,Channel [13] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 12. " [12] ,Channel [12] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 11. " [11] ,Channel [11] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 10. " [10] ,Channel [10] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 9. " [9] ,Channel [9] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 8. " [8] ,Channel [8] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 7. " [7] ,Channel [7] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 6. " [6] ,Channel [6] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 5. " [5] ,Channel [5] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 4. " [4] ,Channel [4] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 3. " [3] ,Channel [3] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 2. " [2] ,Channel [2] software request" "Do not generate,Generate"
|
|
newline
|
|
bitfld.long 0x00 1. " [1] ,Channel [1] software request" "Do not generate,Generate"
|
|
bitfld.long 0x00 0. " [0] ,Channel [0] software request" "Do not generate,Generate"
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "USEBURST_SET/CLR,DMA Channel Useburst Set/Clear Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x04 31. " CH[31] ,Channel [31] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x04 30. " [30] ,Channel [30] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x04 29. " [29] ,Channel [29] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 28. 0x00 28. 0x04 28. " [28] ,Channel [28] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x04 27. " [27] ,Channel [27] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x04 26. " [26] ,Channel [26] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 25. 0x00 25. 0x04 25. " [25] ,Channel [25] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x04 24. " [24] ,Channel [24] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x04 23. " [23] ,Channel [23] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 22. 0x00 22. 0x04 22. " [22] ,Channel [22] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x04 21. " [21] ,Channel [21] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x04 20. " [20] ,Channel [20] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 19. 0x00 19. 0x04 19. " [19] ,Channel [19] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x04 18. " [18] ,Channel [18] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x04 17. " [17] ,Channel [17] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 16. 0x00 16. 0x04 16. " [16] ,Channel [16] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x04 15. " [15] ,Channel [15] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x04 14. " [14] ,Channel [14] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 13. 0x00 13. 0x04 13. " [13] ,Channel [13] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x04 12. " [12] ,Channel [12] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x04 11. " [11] ,Channel [11] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 10. 0x00 10. 0x04 10. " [10] ,Channel [10] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x04 9. " [9] ,Channel [9] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x04 8. " [8] ,Channel [8] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 7. 0x00 7. 0x04 7. " [7] ,Channel [7] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x04 6. " [6] ,Channel [6] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x04 5. " [5] ,Channel [5] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 4. 0x00 4. 0x04 4. " [4] ,Channel [4] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x04 3. " [3] ,Channel [3] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x04 2. " [2] ,Channel [2] useburst set/clear" "Single/Burst request,Burst request"
|
|
newline
|
|
setclrfld.long 0x00 1. 0x00 1. 0x04 1. " [1] ,Channel [1] useburst set/clear" "Single/Burst request,Burst request"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x04 0. " [0] ,Channel [0] useburst set/clear" "Single/Burst request,Burst request"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "REQMASK_SET/CLR,DMA Channel Request Mask Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x04 31. " CH[31] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x04 30. " [30] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x04 29. " [29] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 28. 0x00 28. 0x04 28. " [28] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x04 27. " [27] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x04 26. " [26] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 25. 0x00 25. 0x04 25. " [25] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x04 24. " [24] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x04 23. " [23] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 22. 0x00 22. 0x04 22. " [22] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x04 21. " [21] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x04 20. " [20] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 19. 0x00 19. 0x04 19. " [19] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x04 18. " [18] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x04 17. " [17] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 16. 0x00 16. 0x04 16. " [16] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x04 15. " [15] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x04 14. " [14] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 13. 0x00 13. 0x04 13. " [13] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x04 12. " [12] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x04 11. " [11] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 10. 0x00 10. 0x04 10. " [10] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x04 9. " [9] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x04 8. " [8] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 7. 0x00 7. 0x04 7. " [7] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x04 6. " [6] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x04 5. " [5] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 4. 0x00 4. 0x04 4. " [4] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x04 3. " [3] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x04 2. " [2] ,Channel [31] request mask" "Requested,Not requested"
|
|
newline
|
|
setclrfld.long 0x00 1. 0x00 1. 0x04 1. " [1] ,Channel [31] request mask" "Requested,Not requested"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x04 0. " [0] ,Channel [31] request mask" "Requested,Not requested"
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "ENA_SET/CLR,DMA Channel Enable Set/Clear Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x04 31. " CH[31] ,Channel [31] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x04 30. " [30] ,Channel [30] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x04 29. " [29] ,Channel [29] enabler" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 28. 0x00 28. 0x04 28. " [28] ,Channel [28] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x04 27. " [27] ,Channel [27] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x04 26. " [26] ,Channel [26] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 25. 0x00 25. 0x04 25. " [25] ,Channel [25] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x04 24. " [24] ,Channel [24] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x04 23. " [23] ,Channel [23] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 22. 0x00 22. 0x04 22. " [22] ,Channel [22] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x04 21. " [21] ,Channel [21] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x04 20. " [20] ,Channel [20] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 19. 0x00 19. 0x04 19. " [19] ,Channel [19] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x04 18. " [18] ,Channel [18] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x04 17. " [17] ,Channel [17] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 16. 0x00 16. 0x04 16. " [16] ,Channel [16] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x04 15. " [15] ,Channel [15] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x04 14. " [14] ,Channel [14] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 13. 0x00 13. 0x04 13. " [13] ,Channel [13] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x04 12. " [12] ,Channel [12] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x04 11. " [11] ,Channel [11] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 10. 0x00 10. 0x04 10. " [10] ,Channel [10] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x04 9. " [9] ,Channel [9] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x04 8. " [8] ,Channel [8] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 7. 0x00 7. 0x04 7. " [7] ,Channel [7] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x04 6. " [6] ,Channel [6] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x04 5. " [5] ,Channel [5] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 4. 0x00 4. 0x04 4. " [4] ,Channel [4] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x04 3. " [3] ,Channel [3] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x04 2. " [2] ,Channel [2] enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 1. 0x00 1. 0x04 1. " [1] ,Channel [1] enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x04 0. " [0] ,Channel [0] enable" "Disabled,Enabled"
|
|
group.long 0x30++0x03
|
|
line.long 0x00 "ALTSET_SET/CLR,DMA Channel Primary Alternate Set/Clear Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x04 31. " CH[31] ,Channel [31] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x04 30. " [30] ,Channel [30] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x04 29. " [29] ,Channel [29] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 28. 0x00 28. 0x04 28. " [28] ,Channel [28] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x04 27. " [27] ,Channel [27] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x04 26. " [26] ,Channel [26] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 25. 0x00 25. 0x04 25. " [25] ,Channel [25] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x04 24. " [24] ,Channel [24] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x04 23. " [23] ,Channel [23] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 22. 0x00 22. 0x04 22. " [22] ,Channel [22] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x04 21. " [21] ,Channel [21] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x04 20. " [20] ,Channel [20] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 19. 0x00 19. 0x04 19. " [19] ,Channel [19] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x04 18. " [18] ,Channel [18] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x04 17. " [17] ,Channel [17] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 16. 0x00 16. 0x04 16. " [16] ,Channel [16] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x04 15. " [15] ,Channel [15] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x04 14. " [14] ,Channel [14] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 13. 0x00 13. 0x04 13. " [13] ,Channel [13] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x04 12. " [12] ,Channel [12] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x04 11. " [11] ,Channel [11] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 10. 0x00 10. 0x04 10. " [10] ,Channel [10] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x04 9. " [9] ,Channel [9] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x04 8. " [8] ,Channel [8] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 7. 0x00 7. 0x04 7. " [7] ,Channel [7] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x04 6. " [6] ,Channel [6] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x04 5. " [5] ,Channel [5] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 4. 0x00 4. 0x04 4. " [4] ,Channel [4] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x04 3. " [3] ,Channel [3] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x04 2. " [2] ,Channel [2] alternate enable" "Disabled,Enabled"
|
|
newline
|
|
setclrfld.long 0x00 1. 0x00 1. 0x04 1. " [1] ,Channel [1] alternate enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x04 0. " [0] ,Channel [0] alternate enable" "Disabled,Enabled"
|
|
group.long 0x38++0x03
|
|
line.long 0x00 "PRIO_SET/CLR,DMA Channel Priority Set/Clear Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x04 31. " CH[31] ,Channel [31] priority level" "Default,High"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x04 30. " [30] ,Channel [30] priority level" "Default,High"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x04 29. " [29] ,Channel [29] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 28. 0x00 28. 0x04 28. " [28] ,Channel [28] priority level" "Default,High"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x04 27. " [27] ,Channel [27] priority level" "Default,High"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x04 26. " [26] ,Channel [26] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 25. 0x00 25. 0x04 25. " [25] ,Channel [25] priority level" "Default,High"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x04 24. " [24] ,Channel [24] priority level" "Default,High"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x04 23. " [23] ,Channel [23] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 22. 0x00 22. 0x04 22. " [22] ,Channel [22] priority level" "Default,High"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x04 21. " [21] ,Channel [21] priority level" "Default,High"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x04 20. " [20] ,Channel [20] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 19. 0x00 19. 0x04 19. " [19] ,Channel [19] priority level" "Default,High"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x04 18. " [18] ,Channel [18] priority level" "Default,High"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x04 17. " [17] ,Channel [17] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 16. 0x00 16. 0x04 16. " [16] ,Channel [16] priority level" "Default,High"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x04 15. " [15] ,Channel [15] priority level" "Default,High"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x04 14. " [14] ,Channel [14] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 13. 0x00 13. 0x04 13. " [13] ,Channel [13] priority level" "Default,High"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x04 12. " [12] ,Channel [12] priority level" "Default,High"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x04 11. " [11] ,Channel [11] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 10. 0x00 10. 0x04 10. " [10] ,Channel [10] priority level" "Default,High"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x04 9. " [9] ,Channel [9] priority level" "Default,High"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x04 8. " [8] ,Channel [8] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 7. 0x00 7. 0x04 7. " [7] ,Channel [7] priority level" "Default,High"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x04 6. " [6] ,Channel [6] priority level" "Default,High"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x04 5. " [5] ,Channel [5] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 4. 0x00 4. 0x04 4. " [4] ,Channel [4] priority level" "Default,High"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x04 3. " [3] ,Channel [3] priority level" "Default,High"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x04 2. " [2] ,Channel [2] priority level" "Default,High"
|
|
newline
|
|
setclrfld.long 0x00 1. 0x00 1. 0x04 1. " [1] ,Channel [1] priority level" "Default,High"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x04 0. " [0] ,Channel [0] priority level" "Default,High"
|
|
group.long 0x4C++0x03
|
|
line.long 0x00 "ERRCLR,DMA Bus Error Clear Register"
|
|
eventfld.long 0x00 0. " ERRCLR ,DMA bus error status" "No error,Error"
|
|
group.long 0x500++0x03
|
|
line.long 0x00 "CHASGN,DMA Channel Assignment Register"
|
|
bitfld.long 0x00 30. " CHASGN[30] ,Channel [30] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 29. " [29] ,Channel [29] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 28. " [28] ,Channel [28] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 27. " [27] ,Channel [27] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 26. " [26] ,Channel [26] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 25. " [25] ,Channel [25] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 24. " [24] ,Channel [24] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 23. " [23] ,Channel [23] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 22. " [22] ,Channel [22] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 21. " [21] ,Channel [21] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 20. " [20] ,Channel [20] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 19. " [19] ,Channel [19] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 18. " [18] ,Channel [18] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 17. " [17] ,Channel [17] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 16. " [16] ,Channel [16] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 15. " [15] ,Channel [15] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 14. " [14] ,Channel [14] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 13. " [13] ,Channel [13] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 12. " [12] ,Channel [12] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 11. " [11] ,Channel [11] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 10. " [10] ,Channel [10] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 9. " [9] ,Channel [9] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 8. " [8] ,Channel [8] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 7. " [7] ,Channel [7] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 6. " [6] ,Channel [6] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 5. " [5] ,Channel [5] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 4. " [4] ,Channel [4] assignment select" "Primary,Secondary"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,Channel [2] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 1. " [1] ,Channel [1] assignment select" "Primary,Secondary"
|
|
bitfld.long 0x00 0. " [0] ,Channel [0] assignment select" "Primary,Secondary"
|
|
group.long 0x510++0x0F
|
|
line.long 0x00 "DMACHMAP0,DMA Channel Map Register"
|
|
bitfld.long 0x00 28.--31. " CH7SEL ,DMA channel 7 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 24.--27. " CH6SEL ,DMA channel 6 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 20.--23. " CH5SEL ,DMA channel 5 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x00 16.--19. " CH4SEL ,DMA channel 4 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " CH3SEL ,DMA channel 3 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 8.--11. " CH2SEL ,DMA channel 2 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x00 4.--7. " CH1SEL ,DMA channel 1 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 0.--3. " CH0SEL ,DMA channel 0 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x04 "DMACHMAP1,DMA Channel Map Register"
|
|
bitfld.long 0x04 28.--31. " CH15SEL ,DMA channel 15 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x04 24.--27. " CH14SEL ,DMA channel 14 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x04 20.--23. " CH13SEL ,DMA channel 13 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x04 16.--19. " CH12SEL ,DMA channel 12 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x04 12.--15. " CH11SEL ,DMA channel 11 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x04 8.--11. " CH10SEL ,DMA channel 10 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x04 4.--7. " CH9SEL ,DMA channel 9 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x04 0.--3. " CH8SEL ,DMA channel 8 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x08 "DMACHMAP2,DMA Channel Map Register"
|
|
bitfld.long 0x08 28.--31. " CH23SEL ,DMA channel 23 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x08 24.--27. " CH22SEL ,DMA channel 22 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x08 20.--23. " CH21SEL ,DMA channel 21 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x08 16.--19. " CH20SEL ,DMA channel 20 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x08 12.--15. " CH19SEL ,DMA channel 19 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x08 8.--11. " CH18SEL ,DMA channel 18 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x08 4.--7. " CH817EL ,DMA channel 17 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x08 0.--3. " CH16SEL ,DMA channel 16 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x0C "DMACHMAP3,DMA Channel Map Register"
|
|
bitfld.long 0x0C 24.--27. " CH30SEL ,DMA channel 30 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 20.--23. " CH29SEL ,DMA channel 29 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 16.--19. " CH28SEL ,DMA channel 28 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x0C 12.--15. " CH27SEL ,DMA channel 27 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 8.--11. " CH26SEL ,DMA channel 26 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 4.--7. " CH25SEL ,DMA channel 25 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x0C 0.--3. " CH24SEL ,DMA channel 24 source select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "General-Purpose Input/Outputs (GPIO)"
|
|
tree "GPIO Port A0"
|
|
base ad:0x40004000
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "DATA,Data Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " DATA ,GPIO data value"
|
|
group.long 0x400++0x13
|
|
line.long 0x00 "DIR,Direction Register"
|
|
bitfld.long 0x00 7. " DIR[7] ,GPIO data direction 7" "Input,Output"
|
|
bitfld.long 0x00 6. " [6] ,GPIO data direction 6" "Input,Output"
|
|
bitfld.long 0x00 5. " [5] ,GPIO data direction 5" "Input,Output"
|
|
bitfld.long 0x00 4. " [4] ,GPIO data direction 4" "Input,Output"
|
|
bitfld.long 0x00 3. " [3] ,GPIO data direction 3" "Input,Output"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,GPIO data direction 2" "Input,Output"
|
|
bitfld.long 0x00 1. " [1] ,GPIO data direction 1" "Input,Output"
|
|
bitfld.long 0x00 0. " [0] ,GPIO data direction 0" "Input,Output"
|
|
line.long 0x04 "IS,Interrupt Sense Register"
|
|
bitfld.long 0x04 7. " IS[7] ,GPIO interrupt sense 7" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 6. " [6] ,GPIO interrupt sense 6" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 5. " [5] ,GPIO interrupt sense 5" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 4. " [4] ,GPIO interrupt sense 4" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 3. " [3] ,GPIO interrupt sense 3" "Edge-sensitive,Level-sensitive"
|
|
newline
|
|
bitfld.long 0x04 2. " [2] ,GPIO interrupt sense 2" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 1. " [1] ,GPIO interrupt sense 1" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 0. " [0] ,GPIO interrupt sense 0" "Edge-sensitive,Level-sensitive"
|
|
line.long 0x08 "IBE,Interrupt Both Edges Register"
|
|
bitfld.long 0x08 7. " IBE[7] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 6. " [6] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 5. " [5] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 4. " [4] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 3. " [3] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x08 2. " [2] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " [1] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " [0] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
line.long 0x0C "IEV,Interrupt Event Register"
|
|
bitfld.long 0x0C 7. " IEV[7] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 6. " [6] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 5. " [5] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 4. " [4] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 3. " [3] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
newline
|
|
bitfld.long 0x0C 2. " [2] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 1. " [1] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 0. " [0] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
line.long 0x10 "IM,Interrupt Mask Register"
|
|
bitfld.long 0x10 5. " IME[7] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 5. " [6] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 5. " [5] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 4. " [4] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 3. " [3] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x10 2. " [2] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 1. " [1] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 0. " [0] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
rgroup.long 0x414++0x07
|
|
line.long 0x00 "RIS,Raw Interrupt Status Register"
|
|
bitfld.long 0x00 5. " RIS[7] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 5. " [6] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 5. " [5] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 4. " [4] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 3. " [3] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 1. " [1] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 0. " [0] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
line.long 0x04 "MIS,Masked Interrupt Status Register"
|
|
bitfld.long 0x04 5. " MIS[7] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " [6] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " [5] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " [4] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 3. " [3] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 2. " [2] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 1. " [1] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 0. " [0] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x41C++0x03
|
|
line.long 0x00 "ICR,Interrupt Clear Register"
|
|
eventfld.long 0x00 7. " IC[7] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 6. " [6] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 5. " [5] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 4. " [4] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 3. " [3] ,GPIO interrupt raw status" "No effect,Clear"
|
|
newline
|
|
eventfld.long 0x00 2. " [2] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 1. " [1] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 0. " [0] ,GPIO interrupt raw status" "No effect,Clear"
|
|
width 9.
|
|
width 0x0B
|
|
tree.end
|
|
tree "GPIO Port A1"
|
|
base ad:0x40005000
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "DATA,Data Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " DATA ,GPIO data value"
|
|
group.long 0x400++0x13
|
|
line.long 0x00 "DIR,Direction Register"
|
|
bitfld.long 0x00 7. " DIR[7] ,GPIO data direction 7" "Input,Output"
|
|
bitfld.long 0x00 6. " [6] ,GPIO data direction 6" "Input,Output"
|
|
bitfld.long 0x00 5. " [5] ,GPIO data direction 5" "Input,Output"
|
|
bitfld.long 0x00 4. " [4] ,GPIO data direction 4" "Input,Output"
|
|
bitfld.long 0x00 3. " [3] ,GPIO data direction 3" "Input,Output"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,GPIO data direction 2" "Input,Output"
|
|
bitfld.long 0x00 1. " [1] ,GPIO data direction 1" "Input,Output"
|
|
bitfld.long 0x00 0. " [0] ,GPIO data direction 0" "Input,Output"
|
|
line.long 0x04 "IS,Interrupt Sense Register"
|
|
bitfld.long 0x04 7. " IS[7] ,GPIO interrupt sense 7" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 6. " [6] ,GPIO interrupt sense 6" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 5. " [5] ,GPIO interrupt sense 5" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 4. " [4] ,GPIO interrupt sense 4" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 3. " [3] ,GPIO interrupt sense 3" "Edge-sensitive,Level-sensitive"
|
|
newline
|
|
bitfld.long 0x04 2. " [2] ,GPIO interrupt sense 2" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 1. " [1] ,GPIO interrupt sense 1" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 0. " [0] ,GPIO interrupt sense 0" "Edge-sensitive,Level-sensitive"
|
|
line.long 0x08 "IBE,Interrupt Both Edges Register"
|
|
bitfld.long 0x08 7. " IBE[7] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 6. " [6] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 5. " [5] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 4. " [4] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 3. " [3] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x08 2. " [2] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " [1] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " [0] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
line.long 0x0C "IEV,Interrupt Event Register"
|
|
bitfld.long 0x0C 7. " IEV[7] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 6. " [6] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 5. " [5] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 4. " [4] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 3. " [3] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
newline
|
|
bitfld.long 0x0C 2. " [2] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 1. " [1] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 0. " [0] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
line.long 0x10 "IM,Interrupt Mask Register"
|
|
bitfld.long 0x10 5. " IME[7] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 5. " [6] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 5. " [5] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 4. " [4] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 3. " [3] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x10 2. " [2] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 1. " [1] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 0. " [0] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
rgroup.long 0x414++0x07
|
|
line.long 0x00 "RIS,Raw Interrupt Status Register"
|
|
bitfld.long 0x00 5. " RIS[7] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 5. " [6] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 5. " [5] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 4. " [4] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 3. " [3] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 1. " [1] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 0. " [0] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
line.long 0x04 "MIS,Masked Interrupt Status Register"
|
|
bitfld.long 0x04 5. " MIS[7] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " [6] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " [5] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " [4] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 3. " [3] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 2. " [2] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 1. " [1] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 0. " [0] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x41C++0x03
|
|
line.long 0x00 "ICR,Interrupt Clear Register"
|
|
eventfld.long 0x00 7. " IC[7] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 6. " [6] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 5. " [5] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 4. " [4] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 3. " [3] ,GPIO interrupt raw status" "No effect,Clear"
|
|
newline
|
|
eventfld.long 0x00 2. " [2] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 1. " [1] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 0. " [0] ,GPIO interrupt raw status" "No effect,Clear"
|
|
width 9.
|
|
width 0x0B
|
|
tree.end
|
|
tree "GPIO Port A2"
|
|
base ad:0x40006000
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "DATA,Data Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " DATA ,GPIO data value"
|
|
group.long 0x400++0x13
|
|
line.long 0x00 "DIR,Direction Register"
|
|
bitfld.long 0x00 7. " DIR[7] ,GPIO data direction 7" "Input,Output"
|
|
bitfld.long 0x00 6. " [6] ,GPIO data direction 6" "Input,Output"
|
|
bitfld.long 0x00 5. " [5] ,GPIO data direction 5" "Input,Output"
|
|
bitfld.long 0x00 4. " [4] ,GPIO data direction 4" "Input,Output"
|
|
bitfld.long 0x00 3. " [3] ,GPIO data direction 3" "Input,Output"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,GPIO data direction 2" "Input,Output"
|
|
bitfld.long 0x00 1. " [1] ,GPIO data direction 1" "Input,Output"
|
|
bitfld.long 0x00 0. " [0] ,GPIO data direction 0" "Input,Output"
|
|
line.long 0x04 "IS,Interrupt Sense Register"
|
|
bitfld.long 0x04 7. " IS[7] ,GPIO interrupt sense 7" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 6. " [6] ,GPIO interrupt sense 6" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 5. " [5] ,GPIO interrupt sense 5" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 4. " [4] ,GPIO interrupt sense 4" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 3. " [3] ,GPIO interrupt sense 3" "Edge-sensitive,Level-sensitive"
|
|
newline
|
|
bitfld.long 0x04 2. " [2] ,GPIO interrupt sense 2" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 1. " [1] ,GPIO interrupt sense 1" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 0. " [0] ,GPIO interrupt sense 0" "Edge-sensitive,Level-sensitive"
|
|
line.long 0x08 "IBE,Interrupt Both Edges Register"
|
|
bitfld.long 0x08 7. " IBE[7] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 6. " [6] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 5. " [5] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 4. " [4] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 3. " [3] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x08 2. " [2] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " [1] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " [0] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
line.long 0x0C "IEV,Interrupt Event Register"
|
|
bitfld.long 0x0C 7. " IEV[7] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 6. " [6] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 5. " [5] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 4. " [4] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 3. " [3] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
newline
|
|
bitfld.long 0x0C 2. " [2] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 1. " [1] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 0. " [0] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
line.long 0x10 "IM,Interrupt Mask Register"
|
|
bitfld.long 0x10 5. " IME[7] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 5. " [6] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 5. " [5] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 4. " [4] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 3. " [3] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x10 2. " [2] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 1. " [1] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 0. " [0] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
rgroup.long 0x414++0x07
|
|
line.long 0x00 "RIS,Raw Interrupt Status Register"
|
|
bitfld.long 0x00 5. " RIS[7] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 5. " [6] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 5. " [5] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 4. " [4] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 3. " [3] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 1. " [1] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 0. " [0] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
line.long 0x04 "MIS,Masked Interrupt Status Register"
|
|
bitfld.long 0x04 5. " MIS[7] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " [6] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " [5] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " [4] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 3. " [3] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 2. " [2] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 1. " [1] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 0. " [0] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x41C++0x03
|
|
line.long 0x00 "ICR,Interrupt Clear Register"
|
|
eventfld.long 0x00 7. " IC[7] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 6. " [6] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 5. " [5] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 4. " [4] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 3. " [3] ,GPIO interrupt raw status" "No effect,Clear"
|
|
newline
|
|
eventfld.long 0x00 2. " [2] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 1. " [1] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 0. " [0] ,GPIO interrupt raw status" "No effect,Clear"
|
|
width 9.
|
|
width 0x0B
|
|
tree.end
|
|
tree "GPIO Port A3"
|
|
base ad:0x40007000
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "DATA,Data Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " DATA ,GPIO data value"
|
|
group.long 0x400++0x13
|
|
line.long 0x00 "DIR,Direction Register"
|
|
bitfld.long 0x00 7. " DIR[7] ,GPIO data direction 7" "Input,Output"
|
|
bitfld.long 0x00 6. " [6] ,GPIO data direction 6" "Input,Output"
|
|
bitfld.long 0x00 5. " [5] ,GPIO data direction 5" "Input,Output"
|
|
bitfld.long 0x00 4. " [4] ,GPIO data direction 4" "Input,Output"
|
|
bitfld.long 0x00 3. " [3] ,GPIO data direction 3" "Input,Output"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,GPIO data direction 2" "Input,Output"
|
|
bitfld.long 0x00 1. " [1] ,GPIO data direction 1" "Input,Output"
|
|
bitfld.long 0x00 0. " [0] ,GPIO data direction 0" "Input,Output"
|
|
line.long 0x04 "IS,Interrupt Sense Register"
|
|
bitfld.long 0x04 7. " IS[7] ,GPIO interrupt sense 7" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 6. " [6] ,GPIO interrupt sense 6" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 5. " [5] ,GPIO interrupt sense 5" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 4. " [4] ,GPIO interrupt sense 4" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 3. " [3] ,GPIO interrupt sense 3" "Edge-sensitive,Level-sensitive"
|
|
newline
|
|
bitfld.long 0x04 2. " [2] ,GPIO interrupt sense 2" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 1. " [1] ,GPIO interrupt sense 1" "Edge-sensitive,Level-sensitive"
|
|
bitfld.long 0x04 0. " [0] ,GPIO interrupt sense 0" "Edge-sensitive,Level-sensitive"
|
|
line.long 0x08 "IBE,Interrupt Both Edges Register"
|
|
bitfld.long 0x08 7. " IBE[7] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 6. " [6] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 5. " [5] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 4. " [4] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 3. " [3] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x08 2. " [2] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " [1] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " [0] ,GPIO interrupt both edges enable" "Disabled,Enabled"
|
|
line.long 0x0C "IEV,Interrupt Event Register"
|
|
bitfld.long 0x0C 7. " IEV[7] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 6. " [6] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 5. " [5] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 4. " [4] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 3. " [3] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
newline
|
|
bitfld.long 0x0C 2. " [2] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 1. " [1] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
bitfld.long 0x0C 0. " [0] ,GPIO interrupt event (edge/level)" "Falling/Low,Rising/High"
|
|
line.long 0x10 "IM,Interrupt Mask Register"
|
|
bitfld.long 0x10 5. " IME[7] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 5. " [6] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 5. " [5] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 4. " [4] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 3. " [3] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x10 2. " [2] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 1. " [1] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
bitfld.long 0x10 0. " [0] ,GPIO interrupt mask enable" "Masked,Not masked"
|
|
rgroup.long 0x414++0x07
|
|
line.long 0x00 "RIS,Raw Interrupt Status Register"
|
|
bitfld.long 0x00 5. " RIS[7] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 5. " [6] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 5. " [5] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 4. " [4] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 3. " [3] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
newline
|
|
bitfld.long 0x00 2. " [2] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 1. " [1] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
bitfld.long 0x00 0. " [0] ,GPIO interrupt raw status" "Requirements not met,Requirements met"
|
|
line.long 0x04 "MIS,Masked Interrupt Status Register"
|
|
bitfld.long 0x04 5. " MIS[7] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " [6] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " [5] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " [4] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 3. " [3] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 2. " [2] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 1. " [1] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 0. " [0] ,GPIO masked interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x41C++0x03
|
|
line.long 0x00 "ICR,Interrupt Clear Register"
|
|
eventfld.long 0x00 7. " IC[7] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 6. " [6] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 5. " [5] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 4. " [4] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 3. " [3] ,GPIO interrupt raw status" "No effect,Clear"
|
|
newline
|
|
eventfld.long 0x00 2. " [2] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 1. " [1] ,GPIO interrupt raw status" "No effect,Clear"
|
|
eventfld.long 0x00 0. " [0] ,GPIO interrupt raw status" "No effect,Clear"
|
|
width 9.
|
|
width 0x0B
|
|
tree.end
|
|
tree "GPIO Trigger Enable Register"
|
|
base ad:0x400F70C8
|
|
width 6.
|
|
width 9.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TRIG_EN,Trigger Enable Register"
|
|
bitfld.long 0x00 3. " TRIG[3] ,GPIO 3 DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " [2] ,GPIO 2 DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " [1] ,GPIO 1 DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " [1] ,GPIO 0 DMA trigger enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "Universal Asynchronous Receivers/Transmitters (UART)"
|
|
tree "UART0"
|
|
base ad:0x4000C000
|
|
width 8.
|
|
newline
|
|
hgroup.long 0x00++0x03
|
|
hide.long 0x00 "DR,Data Register"
|
|
in
|
|
newline
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "RSR,Receive Status Register"
|
|
bitfld.long 0x00 3. " OE ,UART overrun error" "No error,Error"
|
|
bitfld.long 0x00 2. " BE ,UART break error" "No error,Error"
|
|
bitfld.long 0x00 1. " PE ,UART parity error" "No error,Error"
|
|
bitfld.long 0x00 0. " FE ,UART framing error" "No error,Error"
|
|
wgroup.long 0x04++0x03
|
|
line.long 0x00 "ECR,Error Clear Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " DATA ,Error clear"
|
|
rgroup.long 0x18++0x03
|
|
line.long 0x00 "FR,Flag Register"
|
|
bitfld.long 0x00 7. " TXFE ,UART transmit FIFO empty" "Not empty,Empty"
|
|
bitfld.long 0x00 6. " RXFF ,UART receive FIFO full" "Not full,Full"
|
|
bitfld.long 0x00 5. " TXFF ,UART transmit FIFO full" "Not full,Full"
|
|
bitfld.long 0x00 4. " EXFE ,UART receive FIFO empty" "Not empty,Empty"
|
|
bitfld.long 0x00 3. " BUSY ,UART busy" "Not busy,Busy"
|
|
group.long 0x24++0x17
|
|
line.long 0x00 "IBRD,Integer Baud-Rate Divisor Register"
|
|
hexmask.long.word 0x00 0.--15. 1. " DIVINT ,Integer baud-rate divisor value"
|
|
line.long 0x04 "FBRD,Fractional Baud-Rate Divisor Register"
|
|
bitfld.long 0x04 0.--5. " DIVFRAC ,Fractional baud-rate divisor value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x08 "LCRH,Line Control Register"
|
|
bitfld.long 0x08 7. " SPS ,UART stick parity select" "Low,High"
|
|
bitfld.long 0x08 5.--6. " WLEN ,UART word length" "5 bits,6 bits,7 bits,8 bits"
|
|
bitfld.long 0x08 4. " FEN ,UART FIFOs enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 3. " STP2 ,UART two stop bits select" "One stop,Two stop"
|
|
bitfld.long 0x08 2. " EPS ,UART even parity select" "Odd,Even"
|
|
newline
|
|
bitfld.long 0x08 1. " PEN ,UART parity enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " BRK ,UART send break" "Normal,Low level"
|
|
line.long 0x0C "CTL,Control Register"
|
|
bitfld.long 0x0C 15. " CTSEN ,Enable clear to send" "Disabled,Enabled"
|
|
bitfld.long 0x0C 14. " RTSEN ,Enable request to send" "Disabled,Enabled"
|
|
bitfld.long 0x0C 11. " RTS ,Request to send" "Not requested,Requested"
|
|
bitfld.long 0x0C 9. " RXE ,UART receive enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 8. " TXE ,UART transmit enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x0C 7. " LBE ,UART loop back enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 5. " HSE ,High-speed enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 4. " EOT ,End of transmission" "No,Yes"
|
|
bitfld.long 0x0C 1. " SIREN ,UART SIR enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " UARTEN ,UART enable" "Disabled,Enabled"
|
|
line.long 0x10 "IFLS,Interrupt FIFO Level Select"
|
|
bitfld.long 0x10 3.--5. " RXIFLSEL ,UART receive interrupt FIFO level select" ",Full,Full,Full,Full,?..."
|
|
bitfld.long 0x10 0.--2. " TXIFLSEL ,UART transmit interrupt FIFO level select" ",Empty,Empty,Empty,Empty,?..."
|
|
line.long 0x14 "IM,Interrupt Mask"
|
|
bitfld.long 0x14 17. " DMATXIM ,Transmit DMA interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 16. " DMARXIM ,Receive DMA interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 11. " EOTIM ,End of transmission interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 10. " OEIM ,UART overrun error interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 9. " BEIM ,UART break error interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x14 8. " PEIM ,UART parity error interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 7. " FEIM ,UART framing error interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 6. " RTIM ,UART receive time-out interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 5. " TXIM ,UART transmit interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 4. " RXIM ,UART receive interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x14 1. " CTSIM ,UART clear to send modem interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x3C++0x07
|
|
line.long 0x00 "RIS,Raw Interrupt Status"
|
|
bitfld.long 0x00 17. " DMATXRIS ,Transmit DMA RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 16. " DMARXRIS ,Receive DMA RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 11. " EOTRIS ,End of transmission RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 10. " OERIS ,UART overrun error RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 9. " BERIS ,UART break error RAW interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 8. " PERIS ,UART parity error RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 7. " FERIS ,UART framing error RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 6. " RTRIS ,UART receive time-out RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 5. " TXRIS ,UART transmit RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 4. " RXRIS ,UART receive RAW interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 1. " CTSRIS ,UART clear to send modem RAW interrupt status" "No interrupt,Interrupt"
|
|
line.long 0x04 "MIS,Masked Interrupt Status"
|
|
bitfld.long 0x04 17. " DMATXMIS ,Transmit DMA masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 16. " DMARXMIS ,Receive DMA masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 11. " EOTMIS ,End of transmission masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 10. " OEMIS ,UART overrun error masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 9. " BEMIS ,UART break error masked interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 8. " PEMIS ,UART parity error masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 7. " FEMIS ,UART framing error masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 6. " RTMIS ,UART receive time-out masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " TXMIS ,UART transmit masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " RXMIS ,UART receive masked interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 1. " CTSMIS ,UART clear to send modem masked interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x44++0x07
|
|
line.long 0x00 "ICR,Interrupt Clear"
|
|
eventfld.long 0x00 17. " DMATXIC ,Transmit DMA interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 16. " DMARXIC ,Receive DMA interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 11. " EOTIC ,End of transmission interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 10. " OEIC ,Overrun error interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 9. " BEIC ,Break error interrupt clear" "No effect,Clear"
|
|
newline
|
|
eventfld.long 0x00 8. " PEIC ,Parity error interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 7. " FEIC ,Framing error interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 6. " RTIC ,Receive time-out interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 5. " TXIC ,Transmit interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 4. " RXIC ,Receive interrupt cleive interrupt clear" "No effect,Clear"
|
|
newline
|
|
eventfld.long 0x00 1. " CTSMIC ,UART clear to send modem interrupt clear" "No effect,Clear"
|
|
line.long 0x04 "DMACTL,DMA Control"
|
|
bitfld.long 0x04 2. " DMAERR ,DMA on error automatically disabled" "No,Yes"
|
|
bitfld.long 0x04 1. " TXDMAE ,Transmit DMA enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " RXDMAE ,Receive DMA enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "UART1"
|
|
base ad:0x4000D000
|
|
width 8.
|
|
newline
|
|
hgroup.long 0x00++0x03
|
|
hide.long 0x00 "DR,Data Register"
|
|
in
|
|
newline
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "RSR,Receive Status Register"
|
|
bitfld.long 0x00 3. " OE ,UART overrun error" "No error,Error"
|
|
bitfld.long 0x00 2. " BE ,UART break error" "No error,Error"
|
|
bitfld.long 0x00 1. " PE ,UART parity error" "No error,Error"
|
|
bitfld.long 0x00 0. " FE ,UART framing error" "No error,Error"
|
|
wgroup.long 0x04++0x03
|
|
line.long 0x00 "ECR,Error Clear Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " DATA ,Error clear"
|
|
rgroup.long 0x18++0x03
|
|
line.long 0x00 "FR,Flag Register"
|
|
bitfld.long 0x00 7. " TXFE ,UART transmit FIFO empty" "Not empty,Empty"
|
|
bitfld.long 0x00 6. " RXFF ,UART receive FIFO full" "Not full,Full"
|
|
bitfld.long 0x00 5. " TXFF ,UART transmit FIFO full" "Not full,Full"
|
|
bitfld.long 0x00 4. " EXFE ,UART receive FIFO empty" "Not empty,Empty"
|
|
bitfld.long 0x00 3. " BUSY ,UART busy" "Not busy,Busy"
|
|
bitfld.long 0x00 0. " CTS ,Clear to send" "Not asserted,Asserted"
|
|
group.long 0x24++0x17
|
|
line.long 0x00 "IBRD,Integer Baud-Rate Divisor Register"
|
|
hexmask.long.word 0x00 0.--15. 1. " DIVINT ,Integer baud-rate divisor value"
|
|
line.long 0x04 "FBRD,Fractional Baud-Rate Divisor Register"
|
|
bitfld.long 0x04 0.--5. " DIVFRAC ,Fractional baud-rate divisor value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x08 "LCRH,Line Control Register"
|
|
bitfld.long 0x08 7. " SPS ,UART stick parity select" "Low,High"
|
|
bitfld.long 0x08 5.--6. " WLEN ,UART word length" "5 bits,6 bits,7 bits,8 bits"
|
|
bitfld.long 0x08 4. " FEN ,UART FIFOs enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 3. " STP2 ,UART two stop bits select" "One stop,Two stop"
|
|
bitfld.long 0x08 2. " EPS ,UART even parity select" "Odd,Even"
|
|
newline
|
|
bitfld.long 0x08 1. " PEN ,UART parity enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " BRK ,UART send break" "Normal,Low level"
|
|
line.long 0x0C "CTL,Control Register"
|
|
bitfld.long 0x0C 15. " CTSEN ,Enable clear to send" "Disabled,Enabled"
|
|
bitfld.long 0x0C 14. " RTSEN ,Enable request to send" "Disabled,Enabled"
|
|
bitfld.long 0x0C 11. " RTS ,Request to send" "Not requested,Requested"
|
|
bitfld.long 0x0C 9. " RXE ,UART receive enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 8. " TXE ,UART transmit enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x0C 7. " LBE ,UART loop back enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 5. " HSE ,High-speed enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 4. " EOT ,End of transmission" "No,Yes"
|
|
bitfld.long 0x0C 1. " SIREN ,UART SIR enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " UARTEN ,UART enable" "Disabled,Enabled"
|
|
line.long 0x10 "IFLS,Interrupt FIFO Level Select"
|
|
bitfld.long 0x10 3.--5. " RXIFLSEL ,UART receive interrupt FIFO level select" ",Full,Full,Full,Full,?..."
|
|
bitfld.long 0x10 0.--2. " TXIFLSEL ,UART transmit interrupt FIFO level select" ",Empty,Empty,Empty,Empty,?..."
|
|
line.long 0x14 "IM,Interrupt Mask"
|
|
bitfld.long 0x14 17. " DMATXIM ,Transmit DMA interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 16. " DMARXIM ,Receive DMA interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 11. " EOTIM ,End of transmission interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 10. " OEIM ,UART overrun error interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 9. " BEIM ,UART break error interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x14 8. " PEIM ,UART parity error interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 7. " FEIM ,UART framing error interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 6. " RTIM ,UART receive time-out interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 5. " TXIM ,UART transmit interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x14 4. " RXIM ,UART receive interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x14 1. " CTSIM ,UART clear to send modem interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x3C++0x07
|
|
line.long 0x00 "RIS,Raw Interrupt Status"
|
|
bitfld.long 0x00 17. " DMATXRIS ,Transmit DMA RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 16. " DMARXRIS ,Receive DMA RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 11. " EOTRIS ,End of transmission RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 10. " OERIS ,UART overrun error RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 9. " BERIS ,UART break error RAW interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 8. " PERIS ,UART parity error RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 7. " FERIS ,UART framing error RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 6. " RTRIS ,UART receive time-out RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 5. " TXRIS ,UART transmit RAW interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 4. " RXRIS ,UART receive RAW interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 1. " CTSRIS ,UART clear to send modem RAW interrupt status" "No interrupt,Interrupt"
|
|
line.long 0x04 "MIS,Masked Interrupt Status"
|
|
bitfld.long 0x04 17. " DMATXMIS ,Transmit DMA masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 16. " DMARXMIS ,Receive DMA masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 11. " EOTMIS ,End of transmission masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 10. " OEMIS ,UART overrun error masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 9. " BEMIS ,UART break error masked interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 8. " PEMIS ,UART parity error masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 7. " FEMIS ,UART framing error masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 6. " RTMIS ,UART receive time-out masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " TXMIS ,UART transmit masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " RXMIS ,UART receive masked interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 1. " CTSMIS ,UART clear to send modem masked interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x44++0x07
|
|
line.long 0x00 "ICR,Interrupt Clear"
|
|
eventfld.long 0x00 17. " DMATXIC ,Transmit DMA interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 16. " DMARXIC ,Receive DMA interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 11. " EOTIC ,End of transmission interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 10. " OEIC ,Overrun error interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 9. " BEIC ,Break error interrupt clear" "No effect,Clear"
|
|
newline
|
|
eventfld.long 0x00 8. " PEIC ,Parity error interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 7. " FEIC ,Framing error interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 6. " RTIC ,Receive time-out interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 5. " TXIC ,Transmit interrupt clear" "No effect,Clear"
|
|
eventfld.long 0x00 4. " RXIC ,Receive interrupt cleive interrupt clear" "No effect,Clear"
|
|
newline
|
|
eventfld.long 0x00 1. " CTSMIC ,UART clear to send modem interrupt clear" "No effect,Clear"
|
|
line.long 0x04 "DMACTL,DMA Control"
|
|
bitfld.long 0x04 2. " DMAERR ,DMA on error automatically disabled" "No,Yes"
|
|
bitfld.long 0x04 1. " TXDMAE ,Transmit DMA enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " RXDMAE ,Receive DMA enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "Inter-Integrated Circuit (I2C)"
|
|
base ad:0x40020000
|
|
width 12.
|
|
tree "Master"
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "MSA,Master Salve Address Register"
|
|
hexmask.long.byte 0x00 1.--7. 0x02 " SA ,I2C master slave address"
|
|
bitfld.long 0x00 0. " RS ,Receive or send" "Transmit,Receive"
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "MCS,Master Status Register"
|
|
bitfld.long 0x00 31. " ACTDMARX ,DMA RX active status" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTDMATX ,DMA TX active status" "Not active,Active"
|
|
bitfld.long 0x00 7. " CLKTO ,Clock timeout error" "No error,Error"
|
|
bitfld.long 0x00 6. " BUSBSY ,Bus busy status" "Idle,Busy"
|
|
bitfld.long 0x00 5. " IDLE ,I2C idle status" "Not idle,Idle"
|
|
newline
|
|
bitfld.long 0x00 4. " ARBLST ,Arbitration lost" "No,Yes"
|
|
bitfld.long 0x00 3. " DATACK ,Transmitted data was not acknowledged" "No,Yes"
|
|
bitfld.long 0x00 2. " ADRACK ,Transmitted address was not acknowledged" "No,Yes"
|
|
bitfld.long 0x00 1. " ERROR ,Operation error occurred" "No error,Error"
|
|
bitfld.long 0x00 0. " BUSY ,I2C busy status" "Idle,Busy"
|
|
wgroup.long 0x04++0x03
|
|
line.long 0x00 "MCS,Master Control Register"
|
|
bitfld.long 0x00 6. " BURST ,Burst enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " QCMD ,Quick command" "No,Yes"
|
|
bitfld.long 0x00 3. " ACK ,Data acknowledge enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " STOP ,Stop condition" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " START ,Start condition" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " RUN ,I2C master enable" "Disabled,Enabled"
|
|
newline
|
|
hgroup.long 0x08++0x03
|
|
hide.long 0x00 "MDR,Master Data Register"
|
|
in
|
|
newline
|
|
group.long 0x0C++0x07
|
|
line.long 0x00 "MTPR,I2C Master Timer Period Register"
|
|
bitfld.long 0x00 16.--18. " PULSEL ,Glitch suppression pulse width in clock times" "Bypassed,1,2,3,4,8,16,31"
|
|
hexmask.long.byte 0x00 0.--6. 1. " TPR ,SCSCL clock period"
|
|
line.long 0x04 "MIMR,Master Interrupt Mask Register"
|
|
bitfld.long 0x04 11. " RXFFIM ,Receive FIFO full interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 10. " TXFEIM ,Transmit FIFO empty interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 9. " RXIM ,Receive FIFO request interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 8. " TXIM ,Transmit FIFO request interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 7. " ARBLOSTIM ,Transmit FIFO request interrupt mask" "Not masked,Masked"
|
|
newline
|
|
bitfld.long 0x04 6. " STOPIM ,STOP detection interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 5. " STARTIM ,START detection interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 4. " NACKIM ,Address or data NACK interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 3. " DMATXIM ,Transmit DMA interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 2. " DAMRXIM ,Receive DMA interrupt mask" "Not masked,Masked"
|
|
newline
|
|
bitfld.long 0x04 1. " CLKIM ,Clock timeout interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 0. " IM ,Master interrupt mask" "Not masked,Masked"
|
|
rgroup.long 0x14++0x07
|
|
line.long 0x00 "MRIS,Master Raw Interrupt Status Register"
|
|
bitfld.long 0x00 11. " RXFFRIS ,Receive FIFO full raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 10. " TXFERIS ,Transmit FIFO empty raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 9. " RXRIS ,Receive FIFO request raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 8. " TXRIS ,Transmit request raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 7. " ARBLOSTRIS ,Arbitration lost raw interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 6. " STOPRIS ,STOP detection raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 5. " STARTRIS ,START detection raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 4. " NACKRIS ,Address or data NACK raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 3. " DMATXRIS ,Transmit DMA raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 2. " DMARXRIS ,Receive DMA raw interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 1. " CLKRIS ,Clock timeout raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 0. " RIS ,Master raw interrupt status" "No interrupt,Interrupt"
|
|
line.long 0x04 "MMIS,Master Masked Interrupt Status Register"
|
|
bitfld.long 0x04 11. " RXFFMIS ,Receive FIFO full raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 10. " TXFEMIS ,Transmit FIFO empty raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 9. " RXMIS ,Receive FIFO request raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 8. " TXMIS ,Transmit request raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 7. " ARBLOSTMIS ,Arbitration lost raw interrupt mask" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 6. " STOPMIS ,STOP detection raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " STARTMIS ,START detection raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " NACKMIS ,Address or data NACK raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 3. " DMATXMIS ,Transmit DMA raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 2. " DMARXMIS ,Receive DMA raw interrupt mask" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 1. " CLKMIS ,Clock timeout raw interrupt mask" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 0. " MIS ,Master raw interrupt mask" "No interrupt,Interrupt"
|
|
wgroup.long 0x1C++0x03
|
|
line.long 0x00 "MICR,Master Interrupt Clear Register"
|
|
bitfld.long 0x00 11. " RXFFIC ,Receive FIFO full raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 10. " TXFEIC ,Transmit FIFO empty raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 9. " RXIC ,Receive FIFO request raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 8. " TXIC ,Transmit request raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 7. " ARBLOSTIC ,Arbitration lost raw interrupt clear" "Not clear,Clear"
|
|
newline
|
|
bitfld.long 0x00 6. " STOPIC ,STOP detection raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 5. " STARTIC ,START detection raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 4. " NACKIC ,Address or data NACK raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 3. " DMATXIC ,Transmit DMA raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 2. " DMARXIC ,Receive DMA raw interrupt clear" "Not clear,Clear"
|
|
newline
|
|
bitfld.long 0x00 1. " CLKIC ,Clock timeout raw interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 0. " IC ,Master raw interrupt clear" "Not clear,Clear"
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "MCR,Master Configuration Register"
|
|
bitfld.long 0x00 5. " SFE ,I2C slave function enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " MFE ,I2C master function enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " LPBK ,I2C loopback" "Disabled,Enabled"
|
|
line.long 0x04 "MCLKOCNT,Master Clock Low Timeout Count Register"
|
|
hexmask.long.byte 0x04 0.--7. 1. " CNTL ,I2C master count value"
|
|
rgroup.long 0x2C++0x03
|
|
line.long 0x00 "MBMON,Master Bus Monitor Register"
|
|
bitfld.long 0x00 1. " SDA ,I2C SDA signal status" "Low,High"
|
|
bitfld.long 0x00 0. " SCL ,I2C SCL signal status" "Low,High"
|
|
group.long 0x30++0x07
|
|
line.long 0x00 "MBLEN,Master Burst Length Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " CNTL ,I2C burst length value"
|
|
line.long 0x04 "MBCNT,Master Burst Count Register"
|
|
hexmask.long.byte 0x04 0.--7. 1. " CNTL ,I2C master burst count value"
|
|
tree.end
|
|
tree "Slave"
|
|
group.long 0x800++0x03
|
|
line.long 0x00 "SOAR,Slave Own Address Register"
|
|
hexmask.long.byte 0x00 0.--6. 0x01 " OAR ,I2C slave own address"
|
|
rgroup.long 0x804++0x03
|
|
line.long 0x00 "SCSR,Slave Status Register"
|
|
bitfld.long 0x00 31. " ACTDMARX ,DMA RX active status" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTDMATX ,DMA TX active status" "Not active,Active"
|
|
bitfld.long 0x00 5. " QCMDRW ,Quick command read or write" "Write,Read"
|
|
bitfld.long 0x00 4. " QCMDST ,Quick command status" "Not occurred,Occurred"
|
|
bitfld.long 0x00 3. " OAR2SEL ,OAR2 address matched" "Not matched,Matched"
|
|
newline
|
|
bitfld.long 0x00 2. " FBR ,First byte received" "Not received,Received"
|
|
bitfld.long 0x00 1. " TREQ ,Transmit request" "Not requested,Requested"
|
|
bitfld.long 0x00 0. " RREQ ,Receive request" "Not requested,Requested"
|
|
wgroup.long 0x804++0x03
|
|
line.long 0x00 "SCTL,Slave Control Register"
|
|
bitfld.long 0x00 2. " RXFIFO ,RX FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " TXFIFO ,TX FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " DA ,Device active" "Disabled,Enabled"
|
|
newline
|
|
hgroup.long 0x808++0x03
|
|
hide.long 0x00 "SDR,Slave Data Register"
|
|
in
|
|
newline
|
|
group.long 0x80C++0x03
|
|
line.long 0x00 "SIMR,Slave Interrupt Mask Register"
|
|
bitfld.long 0x00 8. " RXFFIM ,Receive FIFO full interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 7. " TXFEIM ,Transmit FIFO empty interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 6. " RXIM ,Receive FIFO request interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 5. " TXIM ,Transmit FIFO request interrupt" "Masked,Not masked"
|
|
bitfld.long 0x00 4. " DMATXIM ,Transmit DMA interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 3. " DMARXIM ,Receive DMA interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 2. " STOPIM ,Stop condition interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 1. " STARTIM ,Start condition interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 0. " DATAIM ,Data interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x810++0x07
|
|
line.long 0x00 "SRIS,Slave Raw Interrupt Status Register"
|
|
bitfld.long 0x00 8. " RXFFRIS ,Receive FIFO full raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 7. " TXFERIS ,Transmit FIFO empty raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 6. " RXRIS ,Transmit FIFO request raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 5. " TXRIS ,Receive FIFO request raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 4. " DMATXRIS ,Transmit DMA raw interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 3. " DMARXRIS ,Receive DMA raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 2. " STOPRIS ,Stop condition raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 1. " STARTRIS ,Start condition raw interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 0. " DATARIS ,Data raw interrupt status" "No interrupt,Interrupt"
|
|
line.long 0x04 "SMIS,Slave Masked Interrupt Status Register"
|
|
bitfld.long 0x04 8. " RXFFMIS ,Receive FIFO full interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 7. " TXFEMIS ,Transmit FIFO empty interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 6. " RXMIS ,Receive FIFO request interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " TXMIS ,Transmit FIFO request interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " DMATXMIS ,Transmit DMA interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 3. " DMARXMIS ,Receive DMA interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 2. " STOPMIS ,Stop condition masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 1. " STARTMIS ,Start condition masked interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 0. " DATAMIS ,Data masked interrupt status" "No interrupt,Interrupt"
|
|
wgroup.long 0x818++0x03
|
|
line.long 0x00 "SICR,Slave Interrupt Clear Register"
|
|
bitfld.long 0x00 8. " RXFFIC ,Receive FIFO full interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 7. " TXFEIC ,Transmit FIFO empty interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 6. " RXIC ,Receive FIFO request interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 5. " TXIC ,Transmit FIFO request interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 4. " DMATXIC ,Transmit DMA interrupt clear" "Not clear,Clear"
|
|
newline
|
|
bitfld.long 0x00 3. " DMARXIC ,Receive DMA interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 2. " STOPIC ,Stop condition masked interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 1. " STARTIC ,Start condition interrupt clear" "Not clear,Clear"
|
|
bitfld.long 0x00 0. " DATAIC ,Data masked interrupt clear" "Not clear,Clear"
|
|
group.long 0x81C++0x07
|
|
line.long 0x00 "SOAR2,Slave Own Address 2 Register"
|
|
bitfld.long 0x00 7. " OAR2EN ,Slave own address 2 enable" "Disabled,Enabled"
|
|
hexmask.long.byte 0x00 0.--6. 0x01 " OAR2 ,Slave own address 2"
|
|
line.long 0x04 "SACKCTL,Slave ACK Control Register"
|
|
bitfld.long 0x04 1. " ACKOVAL ,Slave ACK invalid data or command" "No,Yes"
|
|
bitfld.long 0x04 0. " ACKOEN ,Slave ACK override enable" "Disabled,Enabled"
|
|
tree.end
|
|
newline
|
|
hgroup.long 0xF00++0x03
|
|
hide.long 0x00 "FIFODATA,FIFO Data Register"
|
|
in
|
|
newline
|
|
group.long 0xF04++0x03
|
|
line.long 0x00 "FIFOCTL,FIFO Control Register"
|
|
bitfld.long 0x00 31. " RXASGNMT ,RX control assignment" "Master,Slave"
|
|
bitfld.long 0x00 30. " RXFLUSH ,RX FIFO flush" "No,Yes"
|
|
bitfld.long 0x00 29. " DMARXENA ,DMA RX channel enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16.--18. " RXTRIG ,Trigger when RX FIFO contains bytes of data" "No bytes,1,2,3,4,5,6,7"
|
|
bitfld.long 0x00 15. " TXASGNMT ,TX control assignment" "Master,Slave"
|
|
newline
|
|
bitfld.long 0x00 14. " TXFLUSH ,TX FIFO flush" "No,Yes"
|
|
bitfld.long 0x00 13. " DMATXENA ,DMA TX channel enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--2. " TXTRIG ,Trigger when TX FIFO contains bytes of data" "No bytes,1,2,3,4,5,6,7"
|
|
rgroup.long 0xF08++0x0B
|
|
line.long 0x00 "FIFOSTATUS,FIFO Status Register"
|
|
bitfld.long 0x00 18. " RXABVTRIG ,RX FIFO above trigger level" "No,Yes"
|
|
bitfld.long 0x00 17. " RXFF ,RX FIFO full" "Not full,Full"
|
|
bitfld.long 0x00 16. " RXFE ,RX FIFO empty" "Not empty,Empty"
|
|
bitfld.long 0x00 2. " TXBLWTRIG ,TX FIFO above trigger level" "No,Yes"
|
|
bitfld.long 0x00 1. " TXFF ,TX FIFO full" "Not full,Full"
|
|
newline
|
|
bitfld.long 0x00 0. " TXFE ,TX FIFO empty" "Not empty,Empty"
|
|
line.long 0x04 "PP,Peripheral Properties Register"
|
|
bitfld.long 0x04 0. " HS ,High-speed capable mode" "Standard/fast,?..."
|
|
line.long 0x08 "PC,Peripheral Configuration Register"
|
|
bitfld.long 0x08 0. " HS ,High-speed capable mode" "Standard/fast,?..."
|
|
width 0x0B
|
|
tree.end
|
|
tree "Serial Peripheral Interface (SPI)"
|
|
base ad:0x44021000
|
|
width 11.
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "SYSCONFIG,SPI System Config Register"
|
|
bitfld.long 0x00 0. " SOFTRESET ,Software reset (write/read)" "No action/Reset done,Initiate software/Reset ongoing"
|
|
rgroup.long 0x114++0x03
|
|
line.long 0x00 "SYSSTATUS,Internal Reset Monitoring Register"
|
|
bitfld.long 0x00 0. " RESETDONE ,Internal reset monitoring" "Not completed,Completed"
|
|
group.long 0x118++0x07
|
|
line.long 0x00 "IRQSTATUS,SPI Interrupt Status Register"
|
|
bitfld.long 0x00 17. " EOW ,End of word count event (write/read)" "Unchanged/false,Reset/pending"
|
|
bitfld.long 0x00 16. " WKS ,Wake up event (write/read)" "Unchanged/false,Reset/pending"
|
|
bitfld.long 0x00 3. " RX_OVERFLOW ,Receiver register overflow (write/read)" "Unchanged/false,Reset/pending"
|
|
newline
|
|
bitfld.long 0x00 2. " RX_FULL ,Receiver register full or almost full (write/read)" "Unchanged/false,Reset/pending"
|
|
bitfld.long 0x00 1. " TX_UNDERFLOW ,Transmitter register underflow (write/read)" "Unchanged/false,Reset/pending"
|
|
bitfld.long 0x00 0. " TX_EMPTY ,Transmitter register empty or almost empty (write/read)" "Unchanged/false,Reset/pending"
|
|
line.long 0x04 "IRQENABLE,SPI Interrupt Enable Register"
|
|
bitfld.long 0x04 17. " EOWE ,End of word IRQ enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 16. " WKE ,Wake-up event interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 3. " RX_OVERFLOW_ENABLE ,Receiver register overflow interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 2. " RX_FULL_ENABLE ,Receiver register full or almost full interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 1. " TX_UNDERFLOW_ENABLE ,Transmitter register underflow interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " TX_EMPTY_ENABLE ,Transmitter register empty or almost empty interrupt enable" "Disabled,Enabled"
|
|
if (((per.l(ad:0x44021000+0x128)&0x04)==0x00))
|
|
group.long 0x128++0x03
|
|
line.long 0x00 "MODULCTR,SPI Module Control Register"
|
|
bitfld.long 0x00 2. " MS ,Master/Slave" "Master,Slave"
|
|
bitfld.long 0x00 1. " PIN34 ,Pin mode selection 3 wire vs 4 wire" "SPIEN is used,SPIEN is not used"
|
|
bitfld.long 0x00 0. " SINGLE ,Channel enable" "Disabled,Enabled"
|
|
else
|
|
group.long 0x128++0x03
|
|
line.long 0x00 "MODULCTR,SPI Module Control Register"
|
|
bitfld.long 0x00 2. " MS ,Master/Slave" "Master,Slave"
|
|
bitfld.long 0x00 1. " PIN34 ,Pin mode selection 3 wire vs 4 wire" "SPIEN is used,SPIEN is not used"
|
|
endif
|
|
group.long 0x12C++0x03
|
|
line.long 0x00 "CHCONF,SPI Channel Configuration Register"
|
|
bitfld.long 0x00 29. " CLG ,Clock divider granularity" "Power of two,One cycle"
|
|
bitfld.long 0x00 28. " FFER ,FIFO enabled for receive" "Not used,Used"
|
|
bitfld.long 0x00 27. " FFEW ,FIFO enabled for transmit" "Not used,Used"
|
|
newline
|
|
bitfld.long 0x00 20. " FORCE ,Manual SPIEN assertion to keep SPIEN active between SPI words" "0,1"
|
|
bitfld.long 0x00 19. " TURBO ,Turbo mode" "Deactivated,Activated"
|
|
bitfld.long 0x00 18. " IS ,Input select" "Line0,Line1"
|
|
newline
|
|
bitfld.long 0x00 17. " DPE1 ,Transmission for data line 1 disable" "No,Yes"
|
|
bitfld.long 0x00 16. " DPE0 ,Transmission for data line 0 disable" "No,Yes"
|
|
bitfld.long 0x00 15. " DMAR ,DMA read request enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 14. " DMARW ,DMA write request enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 12.--13. " TRM ,Transmit receive modes" "Transmit and receive mode,?..."
|
|
bitfld.long 0x00 7.--11. " WL ,SPI word length" ",,,,,,,8-bit,,,,,,,,16-bit,,,,,,,,,,,,,,,,32-bit"
|
|
newline
|
|
bitfld.long 0x00 6. " EPOL ,SPIEN polarity" "Low,High"
|
|
bitfld.long 0x00 2.--5. " CLKD ,Frequency divider for SPICLK" "1,2,4,8,16,32,64,128,256,512,1024,2048,4096,8192,16384,32768"
|
|
bitfld.long 0x00 1. " POL ,SPICLK polarity" "Low,High"
|
|
newline
|
|
bitfld.long 0x00 0. " PHA ,SPICLK phase" "Odd,Even"
|
|
rgroup.long 0x130++0x03
|
|
line.long 0x00 "CHSTAT,SPI Channel Status Register"
|
|
bitfld.long 0x00 6. " RXFFF ,Channel FIFO receive buffer full status" "Not full,Full"
|
|
bitfld.long 0x00 5. " RXFFE ,Channel FIFO receive buffer empty status" "Not empty,Empty"
|
|
bitfld.long 0x00 4. " TXFFF ,Channel FIFO transmit buffer full status" "Not full,Full"
|
|
newline
|
|
bitfld.long 0x00 3. " TXFFE ,Channel FIFO receive buffer full status" "Not empty,Empty"
|
|
bitfld.long 0x00 2. " EOT ,Channel end of transfer status" "Not full,Full"
|
|
bitfld.long 0x00 1. " TXS ,Channel transmitter register status" "Full,Empty"
|
|
newline
|
|
bitfld.long 0x00 0. " RXS ,Channel receiver register status" "Empty,Full"
|
|
group.long 0x134++0x07
|
|
line.long 0x00 "CHCTRL,SPI Channel Control Register"
|
|
hexmask.long.byte 0x00 8.--15. 1. " EXTCLK ,Clock ratio extension"
|
|
bitfld.long 0x00 0. " EN ,Channel enable" "Disabled,Enabled"
|
|
line.long 0x04 "TX,TX Register"
|
|
newline
|
|
hgroup.long 0x13C++0x03
|
|
hide.long 0x00 "RX,RX Register"
|
|
in
|
|
newline
|
|
group.long 0x17C++0x03
|
|
line.long 0x00 "XFERLEVEL,SPI XFERLEVEL Register"
|
|
hexmask.long.word 0x00 16.--31. 1. " WCNT ,SPI word counter"
|
|
hexmask.long.byte 0x00 8.--15. 1. " AFL ,Buffer almost full"
|
|
hexmask.long.byte 0x00 0.--7. 1. " AEL ,Buffer almost empty"
|
|
width 0x0B
|
|
tree.end
|
|
tree "General-Purpose Timers (GPT)"
|
|
tree "GPT A0"
|
|
base ad:0x40030000
|
|
width 14.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "GPTMCFG,GPTM Configuration Register"
|
|
bitfld.long 0x00 0.--2. " GPTMCFG ,GPTM configuration" "32-bit timer,,,,16-bit timer,?..."
|
|
line.long 0x04 "GPTMTAMR,GPTM Timer A Mode Register"
|
|
bitfld.long 0x04 11. " TAPLO ,GPTM timer A PWM legacy operation" "Low,High"
|
|
bitfld.long 0x04 10. " TAMRSU ,GPTM timer A match register update" "Cycle,Timeout"
|
|
bitfld.long 0x04 9. " TAPWMIE ,GPTM timer A PWM interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 8. " TAILD ,GPTM timer A interval load write" "Cycle,Timeout"
|
|
bitfld.long 0x04 5. " TAMIE ,GPTM timer A match interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " TACDIR ,GPTM timer A count direction" "Down,Up"
|
|
newline
|
|
bitfld.long 0x04 3. " TAAMS ,GPTM timer A alternate mode select" "Capture,PWM"
|
|
bitfld.long 0x04 2. " TACMR ,GPTM timer A capture mode" "Edge-count,Edge-time"
|
|
bitfld.long 0x04 0.--1. " TAMR ,GPTM timer A mode" ",One-shot,Periodic,Capture"
|
|
if ((per.l(ad:0x40030000+0x0C)&0x100)==0x100)
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "GPTMTBMR,GPTM Timer B Mode Register"
|
|
bitfld.long 0x00 11. " TBPLO ,GPTM timer B PWM legacy operation" "Low,High"
|
|
bitfld.long 0x00 10. " TBMRSU ,GPTM timer B match register update" "Cycle,Timeout"
|
|
bitfld.long 0x00 9. " TBPWMIE ,GPTM timer B PWM interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " TBILD ,GPTM timer B interval load write" "Cycle,Timeout"
|
|
bitfld.long 0x00 5. " TBMIE ,GPTM timer B match interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " TBCDIR ,GPTM timer B count direction" "Down,Up"
|
|
newline
|
|
bitfld.long 0x00 3. " TBBMS ,GPTM timer B alternate mode select" "Capture,PWM"
|
|
bitfld.long 0x00 2. " TBCMR ,GPTM timer B capture mode" "Edge-count,Edge-time"
|
|
bitfld.long 0x00 0.--1. " TBMR ,GPTM timer B mode" ",One-shot,Periodic,Capture"
|
|
endif
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "GPTMCTL,GPTM Control Register"
|
|
bitfld.long 0x00 14. " TBPWML ,GPTM timer B PWM output level" "Not inverted,Inverted"
|
|
bitfld.long 0x00 10.--11. " TBEVENT ,GPTM timer B event mode" "Positive edge,Negative edge,,Both edges"
|
|
bitfld.long 0x00 9. " TBSTALL ,GPTM timer B stall enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " TBEN ,GPTM timer B enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " TAPWML ,GPTM timer A PWM output level" "Not inverted,Inverted"
|
|
bitfld.long 0x00 2.--3. " TAEVENT ,GPTM timer A event mode" "Positive edge,Negative edge,,Both edges"
|
|
bitfld.long 0x00 1. " TASTALL ,GPTM timer A stall enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " TAEN ,GPTM timer A enable" "Disabled,Enabled"
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "GPTMIMR,GPTM Interrupt Mask Register"
|
|
bitfld.long 0x00 13. " DMABIM ,GPTM timer B DMA done interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 11. " TBMIM ,GPTM timer B mode match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 10. " CBEIM ,GPTM capture B event interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 9. " CBMIM ,GPTM capture B match interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTOIM ,GPTM timer B time-out interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 5. " DMAAIM ,GPTM timer A DMA done interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 4. " TAMIM ,GPTM timer A mode match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 2. " CAEIM ,GPTM capture A event interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 1. " CAMIM ,GPTM capture A match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 0. " TATOIM ,GPTM timer A time-out interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x1C++0x07
|
|
line.long 0x00 "GPTMRIS,GPTM Raw Interrupt Status Register"
|
|
bitfld.long 0x00 13. " DMABRIS ,GPTM timer B DMA done raw interrupt status" "Not completed,Completed"
|
|
bitfld.long 0x00 11. " TBMRIS ,GPTM timer B mode match raw interrupt" "Not reached,Reached"
|
|
bitfld.long 0x00 10. " CBERIS ,GPTM capture B event raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x00 9. " CBMRIS ,GPTM capture B match raw interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTORIS ,GPTM timer B time-out raw interrupt" "Not timed out,Timed out"
|
|
bitfld.long 0x00 5. " DMAARIS ,GPTM timer A DMA done raw interrupt status" "Not completed,Completed"
|
|
bitfld.long 0x00 4. " TAMRIS ,GPTM timer A mode match raw interrupt" "Not reached,Reached"
|
|
bitfld.long 0x00 2. " CAERIS ,GPTM capture A event raw interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 1. " CAMRIS ,GPTM capture A match raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x00 0. " TATORIS ,GPTM timer A time-out raw interrupt" "Not timed out,Timed out"
|
|
line.long 0x04 "GPTMMIS,GPTM Masked Interrupt Status"
|
|
bitfld.long 0x04 13. " DMABMIS ,GPTM timer B DMA done masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 11. " TBMMIS ,GPTM timer B mode match masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 10. " CBEMIS ,GPTM capture B event masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 9. " CBMMIS ,GPTM capture B match masked interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x04 8. " TBTOMIS ,GPTM timer B time-out masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 5. " DMAAMIS ,GPTM timer A DMA done masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 4. " TAMMIS ,GPTM timer A mode match raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 2. " CAEMIS ,GPTM capture A event masked interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x04 1. " CAMMIS ,GPTM capture A match masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 0. " TATOMIS ,GPTM timer A time-out masked interrupt" "Not occurred,Occurred"
|
|
group.long 0x24++0x23
|
|
line.long 0x00 "GPTMICR,GPTM Interrupt Clear Register"
|
|
eventfld.long 0x00 13. " DMABINT ,GPTM timer B DMA done interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 11. " TBMCINT ,GPTM timer B mode match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 10. " CBECINT ,GPTM capture B event interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 9. " CBMCINT ,GPTM capture B match interrupt clear" "Not cleared,Cleared"
|
|
newline
|
|
eventfld.long 0x00 8. " TBTOCINT ,GPTM timer B time-out interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 5. " DMAAINT ,GPTM timer A DMA done interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 4. " TAMCINT ,GPTM timer A mode match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 2. " CAECINT ,GPTM capture A event interrupt clear" "Not cleared,Cleared"
|
|
newline
|
|
eventfld.long 0x00 1. " CAMCINT ,GPTM capture A match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 0. " TATOCINT ,GPTM timer A time-out raw interrupt" "Not cleared,Cleared"
|
|
line.long 0x04 "GPTMTAILR,GPTM Timer A Interval Load Register"
|
|
line.long 0x08 "GPTMTBILR,GPTM Timer B Interval Load Register"
|
|
line.long 0x0C "GPTMTAMATCHR,GPTM Timer A Match Register"
|
|
line.long 0x10 "GPTMTBMATCHR,GPTM Timer B Match Register"
|
|
line.long 0x14 "GPTMTAPR,GPTM Timer A Prescale Register"
|
|
hexmask.long.byte 0x14 0.--7. 1. " TAPSR ,GPTM timer A prescale"
|
|
line.long 0x18 "GPTMTBPR,GPTM Timer B Prescale Register"
|
|
hexmask.long.byte 0x18 0.--7. 1. " TBPSR ,GPTM timer B prescale"
|
|
line.long 0x1C "GPTMTAPMR,GPTM Timer A Prescale Match Register"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " TAPSMR ,GPTM timer A prescale match"
|
|
line.long 0x20 "GPTMTBPMR,GPTM Timer B Prescale Match Register"
|
|
hexmask.long.byte 0x20 0.--7. 1. " TBPSMR ,GPTM timer B prescale match"
|
|
rgroup.long 0x48++0x07
|
|
line.long 0x00 "GPTMTAR,GPTM Timer A Register"
|
|
line.long 0x04 "GPTMTBR,GPTM Timer B Register"
|
|
group.long 0x50++0x07
|
|
line.long 0x00 "GPTMTAV,GPTM Timer A Value Register"
|
|
line.long 0x04 "GPTMTBV,GPTM Timer B Value Register"
|
|
group.long 0x6C++0x03
|
|
line.long 0x00 "GPTMDMAEV,GPTM DMA Event Trigger Enable Register"
|
|
bitfld.long 0x00 11. " TBMDMAEN ,GPTM B mode match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " CBEDMAEN ,GPTM B capture event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " CBMDMAEN ,GPTM B capture match event DMA trigger enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTODMAEN ,GPTM B time-out event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " TAMDMAEN ,GPTM A mode match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " RTCDMAEN ,GPTM A RTC match event DMA trigger enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 2. " CAEDMAEN ,GPTM A capture event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " CAMDMAEN ,GPTM A capture match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " TATODMAEN ,GPTM A time-out event DMA trigger enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "GPT A1"
|
|
base ad:0x40031000
|
|
width 14.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "GPTMCFG,GPTM Configuration Register"
|
|
bitfld.long 0x00 0.--2. " GPTMCFG ,GPTM configuration" "32-bit timer,,,,16-bit timer,?..."
|
|
line.long 0x04 "GPTMTAMR,GPTM Timer A Mode Register"
|
|
bitfld.long 0x04 11. " TAPLO ,GPTM timer A PWM legacy operation" "Low,High"
|
|
bitfld.long 0x04 10. " TAMRSU ,GPTM timer A match register update" "Cycle,Timeout"
|
|
bitfld.long 0x04 9. " TAPWMIE ,GPTM timer A PWM interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 8. " TAILD ,GPTM timer A interval load write" "Cycle,Timeout"
|
|
bitfld.long 0x04 5. " TAMIE ,GPTM timer A match interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " TACDIR ,GPTM timer A count direction" "Down,Up"
|
|
newline
|
|
bitfld.long 0x04 3. " TAAMS ,GPTM timer A alternate mode select" "Capture,PWM"
|
|
bitfld.long 0x04 2. " TACMR ,GPTM timer A capture mode" "Edge-count,Edge-time"
|
|
bitfld.long 0x04 0.--1. " TAMR ,GPTM timer A mode" ",One-shot,Periodic,Capture"
|
|
if ((per.l(ad:0x40031000+0x0C)&0x100)==0x100)
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "GPTMTBMR,GPTM Timer B Mode Register"
|
|
bitfld.long 0x00 11. " TBPLO ,GPTM timer B PWM legacy operation" "Low,High"
|
|
bitfld.long 0x00 10. " TBMRSU ,GPTM timer B match register update" "Cycle,Timeout"
|
|
bitfld.long 0x00 9. " TBPWMIE ,GPTM timer B PWM interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " TBILD ,GPTM timer B interval load write" "Cycle,Timeout"
|
|
bitfld.long 0x00 5. " TBMIE ,GPTM timer B match interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " TBCDIR ,GPTM timer B count direction" "Down,Up"
|
|
newline
|
|
bitfld.long 0x00 3. " TBBMS ,GPTM timer B alternate mode select" "Capture,PWM"
|
|
bitfld.long 0x00 2. " TBCMR ,GPTM timer B capture mode" "Edge-count,Edge-time"
|
|
bitfld.long 0x00 0.--1. " TBMR ,GPTM timer B mode" ",One-shot,Periodic,Capture"
|
|
endif
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "GPTMCTL,GPTM Control Register"
|
|
bitfld.long 0x00 14. " TBPWML ,GPTM timer B PWM output level" "Not inverted,Inverted"
|
|
bitfld.long 0x00 10.--11. " TBEVENT ,GPTM timer B event mode" "Positive edge,Negative edge,,Both edges"
|
|
bitfld.long 0x00 9. " TBSTALL ,GPTM timer B stall enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " TBEN ,GPTM timer B enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " TAPWML ,GPTM timer A PWM output level" "Not inverted,Inverted"
|
|
bitfld.long 0x00 2.--3. " TAEVENT ,GPTM timer A event mode" "Positive edge,Negative edge,,Both edges"
|
|
bitfld.long 0x00 1. " TASTALL ,GPTM timer A stall enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " TAEN ,GPTM timer A enable" "Disabled,Enabled"
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "GPTMIMR,GPTM Interrupt Mask Register"
|
|
bitfld.long 0x00 13. " DMABIM ,GPTM timer B DMA done interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 11. " TBMIM ,GPTM timer B mode match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 10. " CBEIM ,GPTM capture B event interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 9. " CBMIM ,GPTM capture B match interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTOIM ,GPTM timer B time-out interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 5. " DMAAIM ,GPTM timer A DMA done interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 4. " TAMIM ,GPTM timer A mode match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 2. " CAEIM ,GPTM capture A event interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 1. " CAMIM ,GPTM capture A match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 0. " TATOIM ,GPTM timer A time-out interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x1C++0x07
|
|
line.long 0x00 "GPTMRIS,GPTM Raw Interrupt Status Register"
|
|
bitfld.long 0x00 13. " DMABRIS ,GPTM timer B DMA done raw interrupt status" "Not completed,Completed"
|
|
bitfld.long 0x00 11. " TBMRIS ,GPTM timer B mode match raw interrupt" "Not reached,Reached"
|
|
bitfld.long 0x00 10. " CBERIS ,GPTM capture B event raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x00 9. " CBMRIS ,GPTM capture B match raw interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTORIS ,GPTM timer B time-out raw interrupt" "Not timed out,Timed out"
|
|
bitfld.long 0x00 5. " DMAARIS ,GPTM timer A DMA done raw interrupt status" "Not completed,Completed"
|
|
bitfld.long 0x00 4. " TAMRIS ,GPTM timer A mode match raw interrupt" "Not reached,Reached"
|
|
bitfld.long 0x00 2. " CAERIS ,GPTM capture A event raw interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 1. " CAMRIS ,GPTM capture A match raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x00 0. " TATORIS ,GPTM timer A time-out raw interrupt" "Not timed out,Timed out"
|
|
line.long 0x04 "GPTMMIS,GPTM Masked Interrupt Status"
|
|
bitfld.long 0x04 13. " DMABMIS ,GPTM timer B DMA done masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 11. " TBMMIS ,GPTM timer B mode match masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 10. " CBEMIS ,GPTM capture B event masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 9. " CBMMIS ,GPTM capture B match masked interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x04 8. " TBTOMIS ,GPTM timer B time-out masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 5. " DMAAMIS ,GPTM timer A DMA done masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 4. " TAMMIS ,GPTM timer A mode match raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 2. " CAEMIS ,GPTM capture A event masked interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x04 1. " CAMMIS ,GPTM capture A match masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 0. " TATOMIS ,GPTM timer A time-out masked interrupt" "Not occurred,Occurred"
|
|
group.long 0x24++0x23
|
|
line.long 0x00 "GPTMICR,GPTM Interrupt Clear Register"
|
|
eventfld.long 0x00 13. " DMABINT ,GPTM timer B DMA done interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 11. " TBMCINT ,GPTM timer B mode match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 10. " CBECINT ,GPTM capture B event interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 9. " CBMCINT ,GPTM capture B match interrupt clear" "Not cleared,Cleared"
|
|
newline
|
|
eventfld.long 0x00 8. " TBTOCINT ,GPTM timer B time-out interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 5. " DMAAINT ,GPTM timer A DMA done interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 4. " TAMCINT ,GPTM timer A mode match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 2. " CAECINT ,GPTM capture A event interrupt clear" "Not cleared,Cleared"
|
|
newline
|
|
eventfld.long 0x00 1. " CAMCINT ,GPTM capture A match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 0. " TATOCINT ,GPTM timer A time-out raw interrupt" "Not cleared,Cleared"
|
|
line.long 0x04 "GPTMTAILR,GPTM Timer A Interval Load Register"
|
|
line.long 0x08 "GPTMTBILR,GPTM Timer B Interval Load Register"
|
|
line.long 0x0C "GPTMTAMATCHR,GPTM Timer A Match Register"
|
|
line.long 0x10 "GPTMTBMATCHR,GPTM Timer B Match Register"
|
|
line.long 0x14 "GPTMTAPR,GPTM Timer A Prescale Register"
|
|
hexmask.long.byte 0x14 0.--7. 1. " TAPSR ,GPTM timer A prescale"
|
|
line.long 0x18 "GPTMTBPR,GPTM Timer B Prescale Register"
|
|
hexmask.long.byte 0x18 0.--7. 1. " TBPSR ,GPTM timer B prescale"
|
|
line.long 0x1C "GPTMTAPMR,GPTM Timer A Prescale Match Register"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " TAPSMR ,GPTM timer A prescale match"
|
|
line.long 0x20 "GPTMTBPMR,GPTM Timer B Prescale Match Register"
|
|
hexmask.long.byte 0x20 0.--7. 1. " TBPSMR ,GPTM timer B prescale match"
|
|
rgroup.long 0x48++0x07
|
|
line.long 0x00 "GPTMTAR,GPTM Timer A Register"
|
|
line.long 0x04 "GPTMTBR,GPTM Timer B Register"
|
|
group.long 0x50++0x07
|
|
line.long 0x00 "GPTMTAV,GPTM Timer A Value Register"
|
|
line.long 0x04 "GPTMTBV,GPTM Timer B Value Register"
|
|
group.long 0x6C++0x03
|
|
line.long 0x00 "GPTMDMAEV,GPTM DMA Event Trigger Enable Register"
|
|
bitfld.long 0x00 11. " TBMDMAEN ,GPTM B mode match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " CBEDMAEN ,GPTM B capture event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " CBMDMAEN ,GPTM B capture match event DMA trigger enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTODMAEN ,GPTM B time-out event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " TAMDMAEN ,GPTM A mode match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " RTCDMAEN ,GPTM A RTC match event DMA trigger enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 2. " CAEDMAEN ,GPTM A capture event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " CAMDMAEN ,GPTM A capture match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " TATODMAEN ,GPTM A time-out event DMA trigger enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "GPT A2"
|
|
base ad:0x40032000
|
|
width 14.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "GPTMCFG,GPTM Configuration Register"
|
|
bitfld.long 0x00 0.--2. " GPTMCFG ,GPTM configuration" "32-bit timer,,,,16-bit timer,?..."
|
|
line.long 0x04 "GPTMTAMR,GPTM Timer A Mode Register"
|
|
bitfld.long 0x04 11. " TAPLO ,GPTM timer A PWM legacy operation" "Low,High"
|
|
bitfld.long 0x04 10. " TAMRSU ,GPTM timer A match register update" "Cycle,Timeout"
|
|
bitfld.long 0x04 9. " TAPWMIE ,GPTM timer A PWM interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 8. " TAILD ,GPTM timer A interval load write" "Cycle,Timeout"
|
|
bitfld.long 0x04 5. " TAMIE ,GPTM timer A match interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " TACDIR ,GPTM timer A count direction" "Down,Up"
|
|
newline
|
|
bitfld.long 0x04 3. " TAAMS ,GPTM timer A alternate mode select" "Capture,PWM"
|
|
bitfld.long 0x04 2. " TACMR ,GPTM timer A capture mode" "Edge-count,Edge-time"
|
|
bitfld.long 0x04 0.--1. " TAMR ,GPTM timer A mode" ",One-shot,Periodic,Capture"
|
|
if ((per.l(ad:0x40032000+0x0C)&0x100)==0x100)
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "GPTMTBMR,GPTM Timer B Mode Register"
|
|
bitfld.long 0x00 11. " TBPLO ,GPTM timer B PWM legacy operation" "Low,High"
|
|
bitfld.long 0x00 10. " TBMRSU ,GPTM timer B match register update" "Cycle,Timeout"
|
|
bitfld.long 0x00 9. " TBPWMIE ,GPTM timer B PWM interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " TBILD ,GPTM timer B interval load write" "Cycle,Timeout"
|
|
bitfld.long 0x00 5. " TBMIE ,GPTM timer B match interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " TBCDIR ,GPTM timer B count direction" "Down,Up"
|
|
newline
|
|
bitfld.long 0x00 3. " TBBMS ,GPTM timer B alternate mode select" "Capture,PWM"
|
|
bitfld.long 0x00 2. " TBCMR ,GPTM timer B capture mode" "Edge-count,Edge-time"
|
|
bitfld.long 0x00 0.--1. " TBMR ,GPTM timer B mode" ",One-shot,Periodic,Capture"
|
|
endif
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "GPTMCTL,GPTM Control Register"
|
|
bitfld.long 0x00 14. " TBPWML ,GPTM timer B PWM output level" "Not inverted,Inverted"
|
|
bitfld.long 0x00 10.--11. " TBEVENT ,GPTM timer B event mode" "Positive edge,Negative edge,,Both edges"
|
|
bitfld.long 0x00 9. " TBSTALL ,GPTM timer B stall enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " TBEN ,GPTM timer B enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " TAPWML ,GPTM timer A PWM output level" "Not inverted,Inverted"
|
|
bitfld.long 0x00 2.--3. " TAEVENT ,GPTM timer A event mode" "Positive edge,Negative edge,,Both edges"
|
|
bitfld.long 0x00 1. " TASTALL ,GPTM timer A stall enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " TAEN ,GPTM timer A enable" "Disabled,Enabled"
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "GPTMIMR,GPTM Interrupt Mask Register"
|
|
bitfld.long 0x00 13. " DMABIM ,GPTM timer B DMA done interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 11. " TBMIM ,GPTM timer B mode match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 10. " CBEIM ,GPTM capture B event interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 9. " CBMIM ,GPTM capture B match interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTOIM ,GPTM timer B time-out interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 5. " DMAAIM ,GPTM timer A DMA done interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 4. " TAMIM ,GPTM timer A mode match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 2. " CAEIM ,GPTM capture A event interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 1. " CAMIM ,GPTM capture A match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 0. " TATOIM ,GPTM timer A time-out interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x1C++0x07
|
|
line.long 0x00 "GPTMRIS,GPTM Raw Interrupt Status Register"
|
|
bitfld.long 0x00 13. " DMABRIS ,GPTM timer B DMA done raw interrupt status" "Not completed,Completed"
|
|
bitfld.long 0x00 11. " TBMRIS ,GPTM timer B mode match raw interrupt" "Not reached,Reached"
|
|
bitfld.long 0x00 10. " CBERIS ,GPTM capture B event raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x00 9. " CBMRIS ,GPTM capture B match raw interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTORIS ,GPTM timer B time-out raw interrupt" "Not timed out,Timed out"
|
|
bitfld.long 0x00 5. " DMAARIS ,GPTM timer A DMA done raw interrupt status" "Not completed,Completed"
|
|
bitfld.long 0x00 4. " TAMRIS ,GPTM timer A mode match raw interrupt" "Not reached,Reached"
|
|
bitfld.long 0x00 2. " CAERIS ,GPTM capture A event raw interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 1. " CAMRIS ,GPTM capture A match raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x00 0. " TATORIS ,GPTM timer A time-out raw interrupt" "Not timed out,Timed out"
|
|
line.long 0x04 "GPTMMIS,GPTM Masked Interrupt Status"
|
|
bitfld.long 0x04 13. " DMABMIS ,GPTM timer B DMA done masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 11. " TBMMIS ,GPTM timer B mode match masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 10. " CBEMIS ,GPTM capture B event masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 9. " CBMMIS ,GPTM capture B match masked interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x04 8. " TBTOMIS ,GPTM timer B time-out masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 5. " DMAAMIS ,GPTM timer A DMA done masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 4. " TAMMIS ,GPTM timer A mode match raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 2. " CAEMIS ,GPTM capture A event masked interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x04 1. " CAMMIS ,GPTM capture A match masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 0. " TATOMIS ,GPTM timer A time-out masked interrupt" "Not occurred,Occurred"
|
|
group.long 0x24++0x23
|
|
line.long 0x00 "GPTMICR,GPTM Interrupt Clear Register"
|
|
eventfld.long 0x00 13. " DMABINT ,GPTM timer B DMA done interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 11. " TBMCINT ,GPTM timer B mode match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 10. " CBECINT ,GPTM capture B event interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 9. " CBMCINT ,GPTM capture B match interrupt clear" "Not cleared,Cleared"
|
|
newline
|
|
eventfld.long 0x00 8. " TBTOCINT ,GPTM timer B time-out interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 5. " DMAAINT ,GPTM timer A DMA done interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 4. " TAMCINT ,GPTM timer A mode match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 2. " CAECINT ,GPTM capture A event interrupt clear" "Not cleared,Cleared"
|
|
newline
|
|
eventfld.long 0x00 1. " CAMCINT ,GPTM capture A match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 0. " TATOCINT ,GPTM timer A time-out raw interrupt" "Not cleared,Cleared"
|
|
line.long 0x04 "GPTMTAILR,GPTM Timer A Interval Load Register"
|
|
line.long 0x08 "GPTMTBILR,GPTM Timer B Interval Load Register"
|
|
line.long 0x0C "GPTMTAMATCHR,GPTM Timer A Match Register"
|
|
line.long 0x10 "GPTMTBMATCHR,GPTM Timer B Match Register"
|
|
line.long 0x14 "GPTMTAPR,GPTM Timer A Prescale Register"
|
|
hexmask.long.byte 0x14 0.--7. 1. " TAPSR ,GPTM timer A prescale"
|
|
line.long 0x18 "GPTMTBPR,GPTM Timer B Prescale Register"
|
|
hexmask.long.byte 0x18 0.--7. 1. " TBPSR ,GPTM timer B prescale"
|
|
line.long 0x1C "GPTMTAPMR,GPTM Timer A Prescale Match Register"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " TAPSMR ,GPTM timer A prescale match"
|
|
line.long 0x20 "GPTMTBPMR,GPTM Timer B Prescale Match Register"
|
|
hexmask.long.byte 0x20 0.--7. 1. " TBPSMR ,GPTM timer B prescale match"
|
|
rgroup.long 0x48++0x07
|
|
line.long 0x00 "GPTMTAR,GPTM Timer A Register"
|
|
line.long 0x04 "GPTMTBR,GPTM Timer B Register"
|
|
group.long 0x50++0x07
|
|
line.long 0x00 "GPTMTAV,GPTM Timer A Value Register"
|
|
line.long 0x04 "GPTMTBV,GPTM Timer B Value Register"
|
|
group.long 0x6C++0x03
|
|
line.long 0x00 "GPTMDMAEV,GPTM DMA Event Trigger Enable Register"
|
|
bitfld.long 0x00 11. " TBMDMAEN ,GPTM B mode match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " CBEDMAEN ,GPTM B capture event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " CBMDMAEN ,GPTM B capture match event DMA trigger enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTODMAEN ,GPTM B time-out event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " TAMDMAEN ,GPTM A mode match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " RTCDMAEN ,GPTM A RTC match event DMA trigger enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 2. " CAEDMAEN ,GPTM A capture event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " CAMDMAEN ,GPTM A capture match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " TATODMAEN ,GPTM A time-out event DMA trigger enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "GPT A3"
|
|
base ad:0x40033000
|
|
width 14.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "GPTMCFG,GPTM Configuration Register"
|
|
bitfld.long 0x00 0.--2. " GPTMCFG ,GPTM configuration" "32-bit timer,,,,16-bit timer,?..."
|
|
line.long 0x04 "GPTMTAMR,GPTM Timer A Mode Register"
|
|
bitfld.long 0x04 11. " TAPLO ,GPTM timer A PWM legacy operation" "Low,High"
|
|
bitfld.long 0x04 10. " TAMRSU ,GPTM timer A match register update" "Cycle,Timeout"
|
|
bitfld.long 0x04 9. " TAPWMIE ,GPTM timer A PWM interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 8. " TAILD ,GPTM timer A interval load write" "Cycle,Timeout"
|
|
bitfld.long 0x04 5. " TAMIE ,GPTM timer A match interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " TACDIR ,GPTM timer A count direction" "Down,Up"
|
|
newline
|
|
bitfld.long 0x04 3. " TAAMS ,GPTM timer A alternate mode select" "Capture,PWM"
|
|
bitfld.long 0x04 2. " TACMR ,GPTM timer A capture mode" "Edge-count,Edge-time"
|
|
bitfld.long 0x04 0.--1. " TAMR ,GPTM timer A mode" ",One-shot,Periodic,Capture"
|
|
if ((per.l(ad:0x40033000+0x0C)&0x100)==0x100)
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "GPTMTBMR,GPTM Timer B Mode Register"
|
|
bitfld.long 0x00 11. " TBPLO ,GPTM timer B PWM legacy operation" "Low,High"
|
|
bitfld.long 0x00 10. " TBMRSU ,GPTM timer B match register update" "Cycle,Timeout"
|
|
bitfld.long 0x00 9. " TBPWMIE ,GPTM timer B PWM interrupt enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " TBILD ,GPTM timer B interval load write" "Cycle,Timeout"
|
|
bitfld.long 0x00 5. " TBMIE ,GPTM timer B match interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " TBCDIR ,GPTM timer B count direction" "Down,Up"
|
|
newline
|
|
bitfld.long 0x00 3. " TBBMS ,GPTM timer B alternate mode select" "Capture,PWM"
|
|
bitfld.long 0x00 2. " TBCMR ,GPTM timer B capture mode" "Edge-count,Edge-time"
|
|
bitfld.long 0x00 0.--1. " TBMR ,GPTM timer B mode" ",One-shot,Periodic,Capture"
|
|
endif
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "GPTMCTL,GPTM Control Register"
|
|
bitfld.long 0x00 14. " TBPWML ,GPTM timer B PWM output level" "Not inverted,Inverted"
|
|
bitfld.long 0x00 10.--11. " TBEVENT ,GPTM timer B event mode" "Positive edge,Negative edge,,Both edges"
|
|
bitfld.long 0x00 9. " TBSTALL ,GPTM timer B stall enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " TBEN ,GPTM timer B enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " TAPWML ,GPTM timer A PWM output level" "Not inverted,Inverted"
|
|
bitfld.long 0x00 2.--3. " TAEVENT ,GPTM timer A event mode" "Positive edge,Negative edge,,Both edges"
|
|
bitfld.long 0x00 1. " TASTALL ,GPTM timer A stall enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " TAEN ,GPTM timer A enable" "Disabled,Enabled"
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "GPTMIMR,GPTM Interrupt Mask Register"
|
|
bitfld.long 0x00 13. " DMABIM ,GPTM timer B DMA done interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 11. " TBMIM ,GPTM timer B mode match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 10. " CBEIM ,GPTM capture B event interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 9. " CBMIM ,GPTM capture B match interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTOIM ,GPTM timer B time-out interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 5. " DMAAIM ,GPTM timer A DMA done interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 4. " TAMIM ,GPTM timer A mode match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 2. " CAEIM ,GPTM capture A event interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 1. " CAMIM ,GPTM capture A match interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 0. " TATOIM ,GPTM timer A time-out interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x1C++0x07
|
|
line.long 0x00 "GPTMRIS,GPTM Raw Interrupt Status Register"
|
|
bitfld.long 0x00 13. " DMABRIS ,GPTM timer B DMA done raw interrupt status" "Not completed,Completed"
|
|
bitfld.long 0x00 11. " TBMRIS ,GPTM timer B mode match raw interrupt" "Not reached,Reached"
|
|
bitfld.long 0x00 10. " CBERIS ,GPTM capture B event raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x00 9. " CBMRIS ,GPTM capture B match raw interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTORIS ,GPTM timer B time-out raw interrupt" "Not timed out,Timed out"
|
|
bitfld.long 0x00 5. " DMAARIS ,GPTM timer A DMA done raw interrupt status" "Not completed,Completed"
|
|
bitfld.long 0x00 4. " TAMRIS ,GPTM timer A mode match raw interrupt" "Not reached,Reached"
|
|
bitfld.long 0x00 2. " CAERIS ,GPTM capture A event raw interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 1. " CAMRIS ,GPTM capture A match raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x00 0. " TATORIS ,GPTM timer A time-out raw interrupt" "Not timed out,Timed out"
|
|
line.long 0x04 "GPTMMIS,GPTM Masked Interrupt Status"
|
|
bitfld.long 0x04 13. " DMABMIS ,GPTM timer B DMA done masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 11. " TBMMIS ,GPTM timer B mode match masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 10. " CBEMIS ,GPTM capture B event masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 9. " CBMMIS ,GPTM capture B match masked interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x04 8. " TBTOMIS ,GPTM timer B time-out masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 5. " DMAAMIS ,GPTM timer A DMA done masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 4. " TAMMIS ,GPTM timer A mode match raw interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 2. " CAEMIS ,GPTM capture A event masked interrupt" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x04 1. " CAMMIS ,GPTM capture A match masked interrupt" "Not occurred,Occurred"
|
|
bitfld.long 0x04 0. " TATOMIS ,GPTM timer A time-out masked interrupt" "Not occurred,Occurred"
|
|
group.long 0x24++0x23
|
|
line.long 0x00 "GPTMICR,GPTM Interrupt Clear Register"
|
|
eventfld.long 0x00 13. " DMABINT ,GPTM timer B DMA done interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 11. " TBMCINT ,GPTM timer B mode match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 10. " CBECINT ,GPTM capture B event interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 9. " CBMCINT ,GPTM capture B match interrupt clear" "Not cleared,Cleared"
|
|
newline
|
|
eventfld.long 0x00 8. " TBTOCINT ,GPTM timer B time-out interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 5. " DMAAINT ,GPTM timer A DMA done interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 4. " TAMCINT ,GPTM timer A mode match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 2. " CAECINT ,GPTM capture A event interrupt clear" "Not cleared,Cleared"
|
|
newline
|
|
eventfld.long 0x00 1. " CAMCINT ,GPTM capture A match interrupt clear" "Not cleared,Cleared"
|
|
eventfld.long 0x00 0. " TATOCINT ,GPTM timer A time-out raw interrupt" "Not cleared,Cleared"
|
|
line.long 0x04 "GPTMTAILR,GPTM Timer A Interval Load Register"
|
|
line.long 0x08 "GPTMTBILR,GPTM Timer B Interval Load Register"
|
|
line.long 0x0C "GPTMTAMATCHR,GPTM Timer A Match Register"
|
|
line.long 0x10 "GPTMTBMATCHR,GPTM Timer B Match Register"
|
|
line.long 0x14 "GPTMTAPR,GPTM Timer A Prescale Register"
|
|
hexmask.long.byte 0x14 0.--7. 1. " TAPSR ,GPTM timer A prescale"
|
|
line.long 0x18 "GPTMTBPR,GPTM Timer B Prescale Register"
|
|
hexmask.long.byte 0x18 0.--7. 1. " TBPSR ,GPTM timer B prescale"
|
|
line.long 0x1C "GPTMTAPMR,GPTM Timer A Prescale Match Register"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " TAPSMR ,GPTM timer A prescale match"
|
|
line.long 0x20 "GPTMTBPMR,GPTM Timer B Prescale Match Register"
|
|
hexmask.long.byte 0x20 0.--7. 1. " TBPSMR ,GPTM timer B prescale match"
|
|
rgroup.long 0x48++0x07
|
|
line.long 0x00 "GPTMTAR,GPTM Timer A Register"
|
|
line.long 0x04 "GPTMTBR,GPTM Timer B Register"
|
|
group.long 0x50++0x07
|
|
line.long 0x00 "GPTMTAV,GPTM Timer A Value Register"
|
|
line.long 0x04 "GPTMTBV,GPTM Timer B Value Register"
|
|
group.long 0x6C++0x03
|
|
line.long 0x00 "GPTMDMAEV,GPTM DMA Event Trigger Enable Register"
|
|
bitfld.long 0x00 11. " TBMDMAEN ,GPTM B mode match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " CBEDMAEN ,GPTM B capture event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " CBMDMAEN ,GPTM B capture match event DMA trigger enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " TBTODMAEN ,GPTM B time-out event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " TAMDMAEN ,GPTM A mode match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " RTCDMAEN ,GPTM A RTC match event DMA trigger enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 2. " CAEDMAEN ,GPTM A capture event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " CAMDMAEN ,GPTM A capture match event DMA trigger enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " TATODMAEN ,GPTM A time-out event DMA trigger enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "Watchdog Timer (WDT)"
|
|
base ad:0x40000000
|
|
width 10.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "WDTLOAD,Watchdog Load Register"
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "WDTVALUE,Watchdog Value Register"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "WDTCTL,Watchdog Control Register"
|
|
bitfld.long 0x00 31. " WRC ,Write compatible" "In progress,Not in progress"
|
|
bitfld.long 0x00 2. " INTTYPE ,Watchdog interrupt type" "Valid,Invalid"
|
|
bitfld.long 0x00 0. " INTEN ,Watchdog interrupt enable" "Disabled,Enabled"
|
|
wgroup.long 0x0C++0x03
|
|
line.long 0x00 "WDTICR,Watchdog Interrupt Clear Register"
|
|
rgroup.long 0x10++0x07
|
|
line.long 0x00 "WDTRIS,Watchdog Raw Interrupt Status"
|
|
bitfld.long 0x00 0. " WDTRIS ,Watchdog raw interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x418++0x03
|
|
line.long 0x00 "WDTTEST,Watchdog Test Register"
|
|
bitfld.long 0x00 8. " STALL ,Watchdog stall enable" "Enabled,Disabled"
|
|
group.long 0xC00++0x03
|
|
line.long 0x00 "WDTLOCK,Watchdog Lock Register"
|
|
width 0x0B
|
|
tree.end
|
|
tree "SD Host Controller Interface (SDHCI)"
|
|
base ad:0x44010000
|
|
width 8.
|
|
group.long 0x124++0x03
|
|
line.long 0x00 "CSRE,Card Status Response Error Register"
|
|
bitfld.long 0x00 31. " CSRE[31] ,Card status response 31 error" "No error,Error"
|
|
bitfld.long 0x00 30. " [30] ,Card status response 30 error" "No error,Error"
|
|
bitfld.long 0x00 29. " [29] ,Card status response 29 error" "No error,Error"
|
|
bitfld.long 0x00 28. " [28] ,Card status response 28 error" "No error,Error"
|
|
bitfld.long 0x00 27. " [27] ,Card status response 27 error" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 26. " [26] ,Card status response 26 error" "No error,Error"
|
|
bitfld.long 0x00 25. " [25] ,Card status response 25 error" "No error,Error"
|
|
bitfld.long 0x00 24. " [24] ,Card status response 24 error" "No error,Error"
|
|
bitfld.long 0x00 23. " [23] ,Card status response 23 error" "No error,Error"
|
|
bitfld.long 0x00 22. " [22] ,Card status response 22 error" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 21. " [21] ,Card status response 21 error" "No error,Error"
|
|
bitfld.long 0x00 20. " [20] ,Card status response 20 error" "No error,Error"
|
|
bitfld.long 0x00 19. " [19] ,Card status response 19 error" "No error,Error"
|
|
bitfld.long 0x00 18. " [18] ,Card status response 18 error" "No error,Error"
|
|
bitfld.long 0x00 17. " [17] ,Card status response 17 error" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 16. " [16] ,Card status response 16 error" "No error,Error"
|
|
bitfld.long 0x00 15. " [15] ,Card status response 15 error" "No error,Error"
|
|
bitfld.long 0x00 14. " [14] ,Card status response 14 error" "No error,Error"
|
|
bitfld.long 0x00 13. " [13] ,Card status response 13 error" "No error,Error"
|
|
bitfld.long 0x00 12. " [12] ,Card status response 12 error" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 11. " [11] ,Card status response 11 error" "No error,Error"
|
|
bitfld.long 0x00 10. " [10] ,Card status response 10 error" "No error,Error"
|
|
bitfld.long 0x00 9. " [9] ,Card status response 9 error" "No error,Error"
|
|
bitfld.long 0x00 8. " [8] ,Card status response 8 error" "No error,Error"
|
|
bitfld.long 0x00 7. " [7] ,Card status response 7 error" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 6. " [6] ,Card status response 6 error" "No error,Error"
|
|
bitfld.long 0x00 5. " [5] ,Card status response 5 error" "No error,Error"
|
|
bitfld.long 0x00 4. " [4] ,Card status response 4 error" "No error,Error"
|
|
bitfld.long 0x00 3. " [3] ,Card status response 3 error" "No error,Error"
|
|
bitfld.long 0x00 2. " [2] ,Card status response 2 error" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 1. " [1] ,Card status response 1 error" "No error,Error"
|
|
bitfld.long 0x00 0. " [0] ,Card status response 0 error" "No error,Error"
|
|
group.long 0x12C++0x03
|
|
line.long 0x00 "CON,Configuration Register"
|
|
bitfld.long 0x00 2. " HR ,Broadcast host response" "No response,Response"
|
|
bitfld.long 0x00 1. " INIT ,Send initialization stream init" "Not sent,Sent"
|
|
group.long 0x204++0x0B
|
|
line.long 0x00 "BLK,Transfer Length Configuration Register"
|
|
hexmask.long.word 0x00 16.--31. 1. " NBLK ,Blocks count for current transfer"
|
|
hexmask.long.word 0x00 0.--11. 1. " BLEN ,Transfer block size"
|
|
line.long 0x04 "ARG,Command Argument Register"
|
|
line.long 0x08 "CMD,Command And Transfer Mode Register"
|
|
bitfld.long 0x08 24.--29. " INDX ,Command index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x08 22.--23. " CMD_TYPE ,Command type" "Other,CMD52 Bus,CMD52 Func,CMD12/CMD52"
|
|
bitfld.long 0x08 21. " DP ,Data present select" "Not selected,Selected"
|
|
bitfld.long 0x08 20. " CICE ,Command index check enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 19. " CCCE ,Command CRC check enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x08 16.--17. " RSP_TYPE ,Response type" "No Response,36 bits,48 bits,48 bits busy"
|
|
bitfld.long 0x08 5. " MSBS ,Multi/Single block select" "Single,Multi"
|
|
bitfld.long 0x08 4. " DDIR ,Data transfer direction" "Write,Read"
|
|
bitfld.long 0x08 1. " BCE ,Block count enable" "Disable,Enable"
|
|
bitfld.long 0x08 0. " DE ,DMA enable" "Disable,Enable"
|
|
rgroup.long 0x210++0x0F
|
|
line.long 0x00 "RSP10,Command Response 10 Register"
|
|
hexmask.long.word 0x00 16.--31. 1. " RSP1 ,Command response [31:16]"
|
|
hexmask.long.word 0x00 0.--15. 1. " RSP0 ,Command response [15:0]"
|
|
line.long 0x04 "RSP32,Command Response 32 Register"
|
|
hexmask.long.word 0x04 16.--31. 1. " RSP3 ,Command response [63:48]"
|
|
hexmask.long.word 0x04 0.--15. 1. " RSP2 ,Command response [47:32]"
|
|
line.long 0x08 "RSP54,Command Response 54 Register"
|
|
hexmask.long.word 0x08 16.--31. 1. " RSP5 ,Command response [95:80]"
|
|
hexmask.long.word 0x08 0.--15. 1. " RSP4 ,Command response [79:64]"
|
|
line.long 0x0C "RSP76,Command Response 76 Register"
|
|
hexmask.long.word 0x0C 16.--31. 1. " RSP7 ,Command response [127:112]"
|
|
hexmask.long.word 0x0C 0.--15. 1. " RSP6 ,Command response [111:96]"
|
|
group.long 0x220++0x03
|
|
line.long 0x00 "DATA,Data Register"
|
|
rgroup.long 0x224++0x3
|
|
line.long 0x00 "PSTATE,Present State Register"
|
|
bitfld.long 0x00 11. " BRE ,Buffer read enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " BWE ,Buffer write enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " RTA ,Read transfer active" "Inactive,Active"
|
|
bitfld.long 0x00 8. " WTA ,Write transfer active" "Inactive,Active"
|
|
bitfld.long 0x00 2. " DLA ,MMCI_DAT line active" "Inactive,Active"
|
|
newline
|
|
bitfld.long 0x00 1. " DAT1 ,Command inhibit (MMCI_DAT)" "Allowed,Not Allowed"
|
|
bitfld.long 0x00 0. " CMDI ,Command inhibit (MMCI_CMD)" "Allowed,Not Allowed"
|
|
group.long 0x228++0x13
|
|
line.long 0x00 "HCTL,Control Register"
|
|
bitfld.long 0x00 9.--11. " SDVS ,SD bus voltage select" ",,,,,1.8V,3V,3.3V"
|
|
line.long 0x04 "SYSCTL,SD System Control Register"
|
|
bitfld.long 0x04 26. " SRD ,Software reset for MMCI_DAT line" "No reset,Reset"
|
|
bitfld.long 0x04 25. " SRC ,Software reset for MMCI_CMD line" "No reset,Reset"
|
|
bitfld.long 0x04 24. " SRA ,Software reset for all" "No reset,Reset"
|
|
bitfld.long 0x04 16.--19. " DTO ,Data timeout counter value and busy timeout" "TCF*2^13,TCF*2^14,TCF*2^15,TCF*2^16,TCF*2^17,TCF*2^18,TCF*2^19,TCF*2^20,TCF*2^21,TCF*2^22,TCF*2^23,TCF*2^24,TCF*2^25,TCF*2^26,TCF*2^27,?..."
|
|
hexmask.long.word 0x04 6.--15. 1. " CLKD ,Clock frequency select"
|
|
newline
|
|
bitfld.long 0x04 2. " CEN ,Clock enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 1. " ICS ,Internal clock stable" "Not stable,Stable"
|
|
bitfld.long 0x04 0. " ICE ,Internal clock enable" "Stop,Oscillate"
|
|
line.long 0x08 "STAT,Interrupt Status Register"
|
|
bitfld.long 0x08 29. " BADA ,Bad access to data space" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 28. " CERR ,Card error" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 22. " DEB ,Data end bit error" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 21. " DCRC ,Data CRC error" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 20. " DTO ,Data timeout error" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x08 18. " CEB ,Command end bit error" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 17. " CCRC ,Command CRC error" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 16. " CTO ,Command timeout error" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 15. " ERRI ,Error interrupt" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 5. " BRR ,Buffer read ready" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x08 4. " BWR ,Buffer write ready" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 1. " TC ,Transfer complete" "No interrupt,Interrupt"
|
|
bitfld.long 0x08 0. " CC ,Command complete" "No interrupt,Interrupt"
|
|
line.long 0x0C "IE,Interrupt SD Enable Register"
|
|
bitfld.long 0x0C 29. " BADA_ENABLE ,Bad access to data space status enable" "Masked,Enabled"
|
|
bitfld.long 0x0C 28. " CERR_ENABLE ,Card error status enable" "Masked,Enabled"
|
|
bitfld.long 0x0C 22. " DEB_ENABLE ,Data end bit error status enable" "Masked,Enabled"
|
|
bitfld.long 0x0C 21. " DCRC_ENABLE ,Data CRC error status enable" "Masked,Enabled"
|
|
bitfld.long 0x0C 20. " DTO_ENABLE ,Data timeout error status enable" "Masked,Enabled"
|
|
newline
|
|
bitfld.long 0x0C 18. " CEB_ENABLE ,Command end bit error status enable" "Masked,Enabled"
|
|
bitfld.long 0x0C 16. " CTO_ENABLE ,Command timeout error status enable" "Masked,Enabled"
|
|
bitfld.long 0x0C 5. " BRR_ENABLE ,Buffer read ready status enable" "Masked,Enabled"
|
|
bitfld.long 0x0C 4. " BWR_ENABLE ,Buffer write ready status enable" "Masked,Enabled"
|
|
bitfld.long 0x0C 1. " TC_ENABLE ,Transfer complete status enable" "Masked,Enabled"
|
|
newline
|
|
bitfld.long 0x0C 0. " CC_ENABLE ,Command complete status enable" "Masked,Enabled"
|
|
line.long 0x10 "ISE,Interrupt Signal Enable Register"
|
|
bitfld.long 0x10 29. " BADA_SIGEN ,Bad access to data space signal status enable" "Masked,Enabled"
|
|
bitfld.long 0x10 28. " CERR_SIGEN ,Card error signal status enable" "Masked,Enabled"
|
|
bitfld.long 0x10 22. " DEB_SIGEN ,Data end bit error signal status enable" "Masked,Enabled"
|
|
bitfld.long 0x10 21. " DCRC_SIGEN ,Data CRC error signal status enable" "Masked,Enabled"
|
|
bitfld.long 0x10 20. " DTO_SIGEN ,Data timeout error signal status enable" "Masked,Enabled"
|
|
newline
|
|
bitfld.long 0x10 18. " CEB_SIGEN ,Command end bit error signal status enable" "Masked,Enabled"
|
|
bitfld.long 0x10 16. " CTO_SIGEN ,Command timeout error signal status enable" "Masked,Enabled"
|
|
bitfld.long 0x10 5. " BRR_SIGEN ,Buffer read ready signal status enable" "Masked,Enabled"
|
|
bitfld.long 0x10 4. " BWR_SIGEN ,Buffer write ready signal status enable" "Masked,Enabled"
|
|
bitfld.long 0x10 1. " TC_SIGEN ,Transfer complete signal status enable" "Masked,Enabled"
|
|
newline
|
|
bitfld.long 0x10 0. " CC_SIGEN ,Command complete signal status enable" "Masked,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
; tree "Analog-to-Digital Converter (ADC)"
|
|
; base ad:0x00
|
|
; %include cc3200/adc.ph
|
|
; tree.end
|
|
; tree "Parallel Camera Interface Module (PCIM)"
|
|
; base ad:0x00
|
|
; %include cc3200/pcim.ph
|
|
; tree.end
|
|
tree "Power, Reset and Clock Management (PRCM)"
|
|
base ad:0x4402D000
|
|
width 14.
|
|
group.long 0x00++0x0B
|
|
line.long 0x00 "CAMCLKCFG,Camera Clock Configuration Register"
|
|
bitfld.long 0x00 8.--10. " DIVOFFTIM ,Configuration of OFF-TIME for dividing PLL clk (240 MHz) in generation of Camera func-clk" "1,2,3,4,5,6,7,8"
|
|
rbitfld.long 0x00 3.--7. " NU1 ,NU1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
newline
|
|
bitfld.long 0x00 0.--2. " DIVONTIM ,Configuration of ON-TIME for dividing PLL clk (240 MHz) in generation of Camera func-clk" "1,2,3,4,5,6,7,8"
|
|
line.long 0x04 "CAMCLKEN,Camera Clock Enable Register"
|
|
hexmask.long.byte 0x04 17.--23. 1. " NU1 ,NU1"
|
|
bitfld.long 0x04 16. " DSLPCLKEN ,Camera clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x04 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x04 18. " SLPCLKEN ,Camera clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x04 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x04 10. " RUNCLKEN ,Camera clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x08 "CAMSWRST,Camera Soft Reset Control Register"
|
|
rbitfld.long 0x08 1. " ENSTS ,Camera enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x08 0. " SWRST ,Camera soft reset" "De-asserted,Asserted"
|
|
group.long 0x14++0x07
|
|
line.long 0x00 "MCASPCLKEN,MCASP Clock Enable Register"
|
|
hexmask.long.byte 0x00 17.--23. 1. " NU1 ,NU1"
|
|
bitfld.long 0x00 16. " DSLPCLKEN ,MCASP clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x00 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x00 18. " SLPCLKEN ,MCASP clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x00 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x00 0. " RUNCLKEN ,MCASP clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x04 "MCASPSWRST,MCASP Soft Reset Control Register"
|
|
rbitfld.long 0x04 1. " ENSTS ,MCASP enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x04 0. " SWRST ,MCASP soft reset" "De-asserted,Asserted"
|
|
group.long 0x20++0x1F
|
|
line.long 0x00 "SDIOMCLKCFG,SDIOM Clock Configuration Register"
|
|
bitfld.long 0x00 8.--10. " DIVOFFTIM ,Configuration of OFF-TIME for dividing PLL clk (240 MHz) in generation of MMCHS func-clk" "1,2,3,4,5,6,7,8"
|
|
rbitfld.long 0x00 3.--7. " NU1 ,NU1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
newline
|
|
bitfld.long 0x00 0.--2. " DIVONTIM ,Configuration of ON-TIME for dividing PLL clk (240 MHz) in generation of MMCHS func-clk" "1,2,3,4,5,6,7,8"
|
|
line.long 0x04 "SDIOMCLKEN,SDIOM Clock Enable Register"
|
|
hexmask.long.byte 0x04 17.--23. 1. " NU1 ,NU1"
|
|
bitfld.long 0x04 16. " DSLPCLKEN ,SDIOM clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x04 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x04 18. " SLPCLKEN ,SDIOM clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x04 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x04 0. " RUNCLKEN ,SDIOM clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x08 "SDIOMSWRST,MCASP Soft Reset Control Register"
|
|
rbitfld.long 0x08 1. " ENSTS ,MMCHS enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x08 0. " SWRST ,MMCHS soft reset" "De-asserted,Asserted"
|
|
line.long 0x0C "APSPICLKCFG,APSPI Clock Configuration Register"
|
|
bitfld.long 0x0C 16. " BAUDSEL ,MCSPI_A1_BAUD_CLK_SEL" "XTAL,PLL"
|
|
bitfld.long 0x0C 8.--10. " DIVOFFTIM ,Configuration of OFF-TIME fordividing PLL clk (240 MHz) in generation of MCSPI_A1 func-clk" "1,2,3,4,5,6,7,8"
|
|
newline
|
|
rbitfld.long 0x0C 3.--7. " NU1 ,NU1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x0C 0.--2. " DIVONTIM ,Configuration of ON-TIME for dividing PLL clk (240 MHz) in generation of MCSPI_A1 func-clk" "1,2,3,4,5,6,7,8"
|
|
line.long 0x10 "APSPICLKEN,APSPI Clock Enable Register"
|
|
hexmask.long.byte 0x10 17.--23. 1. " NU1 ,NU1"
|
|
bitfld.long 0x10 16. " DSLPCLKEN ,APSPI clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x10 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x10 18. " SLPCLKEN ,APSPI clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x10 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x10 0. " RUNCLKEN ,APSPI clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x14 "APSPISWRST,MCASP Soft Reset Control Register"
|
|
rbitfld.long 0x14 1. " ENSTS ,MCSPI_A1 enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x14 0. " SWRST ,MCSPI_A1 soft reset" "De-asserted,Asserted"
|
|
line.long 0x18 "DMACLKEN,UDMA_A Clock Enable Register"
|
|
bitfld.long 0x18 16. " DSLPCLKEN ,UDMA_A clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x18 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x18 18. " SLPCLKEN ,UDMA_A clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x18 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x18 0. " RUNCLKEN ,UDMA_A clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x1C "DMASWRST,UDMA_A Soft Reset Control Register"
|
|
rbitfld.long 0x1C 1. " ENSTS ,UDMA_A enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x1C 0. " SWRST ,UDMA_A soft reset" "De-asserted,Asserted"
|
|
group.long 0x50++0x67
|
|
line.long 0x00 "GPIO0CLKEN,GPIO_A Clock Enable Register"
|
|
bitfld.long 0x00 16. " DSLPCLKEN ,GPIO_A clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x00 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x00 18. " SLPCLKEN ,GPIO_A clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x00 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x00 0. " RUNCLKEN ,GPIO_A clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x04 "GPIO0SWRST,GPIO_A Soft Reset Control Register"
|
|
rbitfld.long 0x04 1. " ENSTS ,GPIO_A enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x04 0. " SWRST ,GPIO_A soft reset" "De-asserted,Asserted"
|
|
line.long 0x08 "GPIO1CLKEN,GPIO_B Clock Enable Register"
|
|
bitfld.long 0x08 16. " DSLPCLKEN ,GPIO_B clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x08 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x08 18. " SLPCLKEN ,GPIO_B clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x08 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x08 0. " RUNCLKEN ,GPIO_B clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x0C "GPIO1SWRST,GPIO_B Soft Reset Control Register"
|
|
rbitfld.long 0x0C 1. " ENSTS ,GPIO_B enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x0C 0. " SWRST ,GPIO_B soft reset" "De-asserted,Asserted"
|
|
line.long 0x10 "GPIO2CLKEN,GPIO_C Clock Enable Register"
|
|
bitfld.long 0x10 16. " DSLPCLKEN ,GPIO_C clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x10 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x10 18. " SLPCLKEN ,GPIO_C clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x10 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x10 0. " RUNCLKEN ,GPIO_C clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x14 "GPIO2SWRST,GPIO_C Soft Reset Control Register"
|
|
rbitfld.long 0x14 1. " ENSTS ,GPIO_C enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x14 0. " SWRST ,GPIO_C soft reset" "De-asserted,Asserted"
|
|
line.long 0x18 "GPIO3CLKEN,GPIO_D Clock Enable Register"
|
|
bitfld.long 0x18 16. " DSLPCLKEN ,GPIO_D clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x18 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x18 18. " SLPCLKEN ,GPIO_D clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x18 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x18 0. " RUNCLKEN ,GPIO_D clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x1C "GPIO3SWRST,GPIO_D Soft Reset Control Register"
|
|
rbitfld.long 0x1C 1. " ENSTS ,GPIO_D enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x1C 0. " SWRST ,GPIO_D soft reset" "De-asserted,Asserted"
|
|
line.long 0x20 "GPIO4CLKEN,GPIO_E Clock Enable Register"
|
|
bitfld.long 0x20 16. " DSLPCLKEN ,GPIO_E clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x20 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x20 18. " SLPCLKEN ,GPIO_E clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x20 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x20 0. " RUNCLKEN ,GPIO_E clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x24 "GPIO4SWRST,GPIO_E Soft Reset Control Register"
|
|
rbitfld.long 0x24 1. " ENSTS ,GPIO_E enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x24 0. " SWRST ,GPIO_E soft reset" "De-asserted,Asserted"
|
|
line.long 0x28 "WDTCLKEN,WDOG_A Clock Enable Register"
|
|
bitfld.long 0x28 16. " DSLPCLKEN ,WDOG_A clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x28 9.--15. 1. " NU2 ,NU2"
|
|
bitfld.long 0x28 18. " SLPCLKEN ,WDOG_A clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x28 1.--7. 1. " NU3 ,NU3"
|
|
bitfld.long 0x28 0. " RUNCLKEN ,WDOG_A clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x2C "WDTSWRST,WDOG_A Soft Reset Control Register"
|
|
rbitfld.long 0x2C 1. " ENSTS ,WDOG_A enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x2C 0. " SWRST ,WDOG_A soft reset" "De-asserted,Asserted"
|
|
line.long 0x30 "UART0CLKEN,UART_A0 Clock Enable Register"
|
|
bitfld.long 0x30 16. " UART0DSLPCLKEN ,UART_A0 clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x30 9.--15. 1. " NU1 ,NU1"
|
|
bitfld.long 0x30 18. " UART0SLPCLKEN ,UART_A0 clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x30 1.--7. 1. " NU2 ,NU2"
|
|
bitfld.long 0x30 0. " UART0RCLKEN ,UART_A0 clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x34 "UART0SWRST,UART_A0 Soft Reset Control Register"
|
|
rbitfld.long 0x34 1. " ENSTS ,UART_A0 enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x34 0. " SWRST ,UART_A0 soft reset" "De-asserted,Asserted"
|
|
line.long 0x38 "UART1CLKEN,UART_A1 Clock Enable Register"
|
|
bitfld.long 0x38 16. " DSLPCLKEN ,UART_A1 clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x38 9.--15. 1. " NU1 ,NU1"
|
|
bitfld.long 0x38 18. " SLPCLKEN ,UART_A1 clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x38 1.--7. 1. " NU2 ,NU2"
|
|
bitfld.long 0x38 0. " RUNCLKEN ,UART_A1 clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x3C "UART1SWRST,UART_A1 Soft Reset Control Register"
|
|
rbitfld.long 0x3C 1. " ENSTS ,UART_A1 enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x3C 0. " SWRST ,UART_A1 soft reset" "De-asserted,Asserted"
|
|
line.long 0x40 "GPT0CLKCFG,GPT_A0 Clock Enable Register"
|
|
bitfld.long 0x40 16. " DSLPCLKEN ,GPT_A0 clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x40 9.--15. 1. " NU1 ,NU1"
|
|
bitfld.long 0x40 18. " SLPCLKEN ,GPT_A0 clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x40 1.--7. 1. " NU2 ,NU2"
|
|
bitfld.long 0x40 0. " RUNCLKEN ,GPT_A0 clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x44 "GPT0SWRST,GPT_A0 Soft Reset Control Register"
|
|
rbitfld.long 0x44 1. " ENSTS ,GPT_A0 enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x44 0. " SWRST ,GPT_A0 soft reset" "De-asserted,Asserted"
|
|
line.long 0x48 "GPT1CLKEN,GPT_A1 Clock Enable Register"
|
|
bitfld.long 0x48 16. " DSLPCLKEN ,GPT_A1 clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x48 9.--15. 1. " NU1 ,NU1"
|
|
bitfld.long 0x48 18. " SLPCLKEN ,GPT_A1 clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x48 1.--7. 1. " NU2 ,NU2"
|
|
bitfld.long 0x48 0. " RUNCLKEN ,GPT_A1 clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x4C "GPT1SWRST,GPT_A1 Soft Reset Control Register"
|
|
rbitfld.long 0x4C 1. " ENSTS ,GPT_A1 enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x4C 0. " SWRST ,GPT_A1 soft reset" "De-asserted,Asserted"
|
|
line.long 0x50 "GPT2CLKEN,GPT_A2 Clock Enable Register"
|
|
bitfld.long 0x50 16. " DSLPCLKEN ,GPT_A2 clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x50 9.--15. 1. " NU1 ,NU1"
|
|
bitfld.long 0x50 18. " SLPCLKEN ,GPT_A2 clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x50 1.--7. 1. " NU2 ,NU2"
|
|
bitfld.long 0x50 0. " RUNCLKEN ,GPT_A2 clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x54 "GPT2SWRST,GPT_A2 Soft Reset Control Register"
|
|
rbitfld.long 0x54 1. " ENSTS ,GPT_A2 enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x54 0. " SWRST ,GPT_A2 soft reset" "De-asserted,Asserted"
|
|
line.long 0x58 "GPT3CLKEN,GPT_A3 Clock Enable Register"
|
|
bitfld.long 0x58 16. " DSLPCLKEN ,GPT_A3 clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x58 9.--15. 1. " NU1 ,NU1"
|
|
bitfld.long 0x58 18. " SLPCLKEN ,GPT_A3 clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x58 1.--7. 1. " NU2 ,NU2"
|
|
bitfld.long 0x58 0. " RUNCLKEN ,GPT_A3 clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x5C "GPT3SWRST,GPT_A3 Soft Reset Control Register"
|
|
rbitfld.long 0x5C 1. " ENSTS ,GPT_A3 enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x5C 0. " SWRST ,GPT_A3 soft reset" "De-asserted,Asserted"
|
|
line.long 0x60 "MCASPCLKCFG0,MCASP Clock Configuration 0 Register"
|
|
hexmask.long.word 0x60 16.--25. 1. " DIVISR ,MCASP fractional div divisor"
|
|
hexmask.long.word 0x60 0.--15. 1. " FRACTN ,MCASP fractional div fraction"
|
|
line.long 0x64 "MCASPCLKCFG1,MCASP Clock Configuration 1 Register"
|
|
bitfld.long 0x64 16. " DIVIDRSWRST ,MCASP fractional clock div soft reset" "De-asserted,Asserted"
|
|
hexmask.long.word 0x64 0.--9. 1. " SPARE ,MCASP fractional clock div period"
|
|
group.long 0xD8++0x07
|
|
line.long 0x00 "I2CLCKEN,I2C Clock Enable Register"
|
|
bitfld.long 0x00 16. " DSLPCLKEN ,I2C clock during deep-sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x00 9.--15. 1. " NU1 ,NU1"
|
|
bitfld.long 0x00 18. " SLPCLKEN ,I2C clock during sleep mode enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x00 1.--7. 1. " NU2 ,NU2"
|
|
bitfld.long 0x00 0. " RUNCLKEN ,I2C clock during run mode enable" "Disabled,Enabled"
|
|
line.long 0x04 "I2CSWRST,I2C Soft Reset Control Register"
|
|
rbitfld.long 0x04 1. " ENSTS ,I2C enabled status" "Not occurred,Occurred"
|
|
bitfld.long 0x04 0. " SWRST ,I2C soft reset" "De-asserted,Asserted"
|
|
group.long 0xE4++0x07
|
|
line.long 0x00 "LPDSREQ,LPDS Request Register"
|
|
bitfld.long 0x00 0. " LPDSREQ ,APPS_LPDS request" "Not requested,Requested"
|
|
line.long 0x04 "TURBOREQ,TURBO Request Register"
|
|
bitfld.long 0x04 0. " TURBOREQ ,APPS_TURBO request" "Not requested,Requested"
|
|
group.long 0x108++0x13
|
|
line.long 0x00 "DSLPWAKECFG,DSLP Wake Configuration Register"
|
|
bitfld.long 0x00 1. " EXITDSLPBYNWPEN ,Wake APPS from deep-sleep by NWP enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " EXITDSLPBYTMREN ,Wake timer in APPS RCM for deep-sleep enable" "Disabled,Enabled"
|
|
line.long 0x04 "DSLPTIMRCFG,DSLP Timer Configuration Register"
|
|
hexmask.long.word 0x04 16.--31. 1. " TIMROPPCFG ,DSLP wake timer configuration for OPP requests during deep-sleep exit"
|
|
hexmask.long.word 0x04 0.--15. 1. " TIMRCFG ,DSLP wake timer configuration for WAKE requests during deep-sleep exit"
|
|
line.long 0x08 "SLPWAKEEN,Sleep Wake Enable Register"
|
|
bitfld.long 0x08 1. " EITBYNWP ,Sleep wake-up due to NWP request enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " EXITBYTIMR ,Sleep wake-up due to sleep-timer enable" "Disabled,Enabled"
|
|
line.long 0x0C "SLPTMRCFG,Sleep Wake-Up Timer Configuration"
|
|
line.long 0x10 "WAKENWP,NWP Wake-Up Request Register"
|
|
bitfld.long 0x10 0. " WAKENWP ,APPS NWP wake-up request" "Not requested,Requested"
|
|
rgroup.long 0x120++0x03
|
|
line.long 0x00 "RCM_IS,RCM_IS Sleep Wake-Up Status Register"
|
|
bitfld.long 0x00 14. " WAKETIMRIRQ ,Interrupt status due to the RTC timer" "Not occurred,Occurred"
|
|
bitfld.long 0x00 12. " PLLLOCK ,Interrupt status due to the PLL lock" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 3. " EXITDSLPBYTMR ,Wake-up from deep-sleep due deep-sleep timer expiry status" "Not occurred,Occurred"
|
|
bitfld.long 0x00 2. " EXITSLPBYTMR ,Wake-up from sleep due sleep timer expiry status" "Not occurred,Occurred"
|
|
newline
|
|
bitfld.long 0x00 1. " EXITDSLPBYNWP ,Wake-up from deep-sleep due to NWP status" "Not occurred,Occurred"
|
|
bitfld.long 0x00 0. " EXITSLPBYNWP ,Wake-up from sleep due to NWP status" "Not occurred,Occurred"
|
|
group.long 0x124++0x03
|
|
line.long 0x00 "RCM_IEN,RCM_IEN RCM_IEN Mask Register"
|
|
bitfld.long 0x00 2. " WAKETIMERIRQ ,WAKETIMER interrupt mask" "0,1"
|
|
bitfld.long 0x00 0. " PLLLOCKIRQ ,PLLLOCK interrupt mask" "Masked,Not masked"
|
|
width 0x0B
|
|
tree.end
|
|
; tree "CC3200 Miscellaneous Registers (MISC)"
|
|
; base ad:0x00
|
|
; %include cc3200/misc.ph
|
|
; tree.end
|
|
newline
|