10322 lines
764 KiB
Plaintext
10322 lines
764 KiB
Plaintext
; --------------------------------------------------------------------------------
|
|
; @Title: Apollo On-Chip Peripherals
|
|
; @Props: Released
|
|
; @Author: ASK, STR
|
|
; @Changelog: 2017-12-06 STR
|
|
; @Manufacturer: AMBIQMICRO - Ambiqmicro
|
|
; @Doc: Apollo_MCU_Data_Sheet_DS-A1-1p00.pdf (Rev. 1.00, 2017-03)
|
|
; @Core: Cortex-M4
|
|
; @Chip: APOLLO256, APOLLO512
|
|
; @Copyright: (C) 1989-2017 Lauterbach GmbH, licensed for use with TRACE32(R) only
|
|
; --------------------------------------------------------------------------------
|
|
; $Id: perapollo.per 17736 2024-04-08 09:26:07Z kwisniewski $
|
|
|
|
tree.close "Core Registers (Cortex-M4F)"
|
|
AUTOINDENT.PUSH
|
|
AUTOINDENT.OFF
|
|
tree "System Control"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 12.
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "ACTLR,Auxiliary Control Register"
|
|
bitfld.long 0x00 9. " DISFPCA ,Disables lazy stacking of floating point context" "No,Yes"
|
|
bitfld.long 0x00 8. " DISOOFP ,Disables floating point instructions completing" "No,Yes"
|
|
bitfld.long 0x00 2. " DISFOLD ,Disables folding of IT instructions" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 1. " DISDEFWBUF ,Disables write buffer use during default memory map accesses" "No,Yes"
|
|
bitfld.long 0x00 0. " DISMCYCINT ,Disables interruption of multi-cycle instructions" "No,Yes"
|
|
group.long 0x10++0x0B
|
|
line.long 0x00 "SYST_CSR,SysTick Control and Status Register"
|
|
rbitfld.long 0x00 16. " COUNTFLAG ,Counter Flag" "Not counted,Counted"
|
|
bitfld.long 0x00 2. " CLKSOURCE ,SysTick clock source" "External,Core"
|
|
bitfld.long 0x00 1. " TICKINT ,SysTick Handler" "No SysTick,SysTick"
|
|
textline " "
|
|
bitfld.long 0x00 0. " ENABLE ,Counter Enable" "Disabled,Enabled"
|
|
line.long 0x04 "SYST_RVR,SysTick Reload Value Register"
|
|
hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD ,The value to load into the SYST_CVR when the counter reaches 0"
|
|
line.long 0x08 "SYST_CVR,SysTick Current Value Register"
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "SYST_CALIB,SysTick Calibration Value Register"
|
|
bitfld.long 0x00 31. " NOREF ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented"
|
|
bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing"
|
|
rgroup.long 0xD00++0x03
|
|
line.long 0x00 "CPUID,CPU ID Base Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER ,Implementer Code"
|
|
bitfld.long 0x00 20.--23. " VARIANT ,Indicates processor revision" "Revision 0,?..."
|
|
bitfld.long 0x00 16.--19. " ARCHITECTURE ,Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
hexmask.long.word 0x00 4.--15. 1. " PARTNO ,Indicates part number"
|
|
bitfld.long 0x00 0.--3. " REVISION ,Indicates patch release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group.long 0xD04++0x23
|
|
line.long 0x00 "ICSR,Interrupt Control State Register"
|
|
bitfld.long 0x00 31. " NMIPENDSET ,Set Pending NMI Bit" "Inactive,Active"
|
|
bitfld.long 0x00 28. " PENDSVSET ,Set Pending pendSV Bit" "Not pending,Pending"
|
|
bitfld.long 0x00 27. " PENDSVCLR ,Removes the pending status of the PendSV exception" "No effect,Removed"
|
|
textline " "
|
|
bitfld.long 0x00 26. " PENDSTSET ,Set Pending SysTick Bit" "Not pending,Pending"
|
|
bitfld.long 0x00 25. " PENDSTCLR ,Clear Pending SysTick Bit" "No effect,Removed"
|
|
bitfld.long 0x00 23. " ISRPREEMPT ,Use Only at Debug Time" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 22. " ISRPENDING ,Indicates whether an external interrupt" "Not pending,Pending"
|
|
hexmask.long.word 0x00 12.--20. 1. " VECTPENDING ,Pending ISR Number Field"
|
|
bitfld.long 0x00 11. " RETTOBASE ,Interrupt Exception" "Active,Not active"
|
|
textline " "
|
|
hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE ,The exception number of the current executing exception"
|
|
line.long 0x04 "VTOR,Vector Table Offset Register"
|
|
hexmask.long 0x04 7.--31. 0x80 " TBLOFF ,Vector table address"
|
|
line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register"
|
|
hexmask.long.word 0x08 16.--31. 1. " VECTKEY ,Register Key"
|
|
rbitfld.long 0x08 15. " ENDIANESS ,Data endianness Bit" "Little,Big"
|
|
bitfld.long 0x08 8.--10. " PRIGROUP ,Interrupt Priority Grouping Field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
|
|
textline " "
|
|
bitfld.long 0x08 2. " SYSRESETREQ ,System Reset Request" "Not requested,Requested"
|
|
bitfld.long 0x08 1. " VECTCLRACTIVE ,Clear Active Vector Bit" "No effect,Clear"
|
|
bitfld.long 0x08 0. " VECTRESET ,System Reset" "No effect,Reset"
|
|
line.long 0x0C "SCR,System Control Register"
|
|
bitfld.long 0x0C 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup"
|
|
bitfld.long 0x0C 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep"
|
|
bitfld.long 0x0C 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled"
|
|
line.long 0x10 "CCR,Configuration Control Register"
|
|
bitfld.long 0x10 18. " BP ,Branch prediction enable bit" "Disabled,Enabled"
|
|
bitfld.long 0x10 17. " IC ,Instruction cache enable bit" "Disabled,Enabled"
|
|
bitfld.long 0x10 16. " DC ,Cache enable bit" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 9. " STKALIGN ,8-byte Stack Frame Alignment" "4-byte/no adjustment,8-byte/adjustment"
|
|
bitfld.long 0x10 8. " BFHFNMIGN ,Enable NMI and Hard Fault and FAULTMASK to Ignore Bus Fault" "Disabled,Enabled"
|
|
bitfld.long 0x10 4. " DIV_0_TRP ,Trap Divide by Zero" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 3. " UNALIGN_TRP ,Trap for Unaligned Access" "Disabled,Enabled"
|
|
bitfld.long 0x10 1. " USERSETMPEND ,Controls whether unprivileged software can access the STIR" "Denied,Allowed"
|
|
bitfld.long 0x10 0. " NONEBASETHRDENA ,Control Entry to Thread Mode" "Only from last exception,Any level"
|
|
line.long 0x14 "SHPR1,SSystem Handler Priority Register 1"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_7 ,Priority of System Handler 7"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_6 ,Priority of system handler 6(UsageFault)"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_5 ,Priority of system handler 5(BusFault)"
|
|
textline " "
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_4 ,Priority of system handler 4(MemManage)"
|
|
line.long 0x18 "SHPR2,System Handler Priority Register 2"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_11 ,Priority of system handler 11(SVCall)"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_10 ,Priority of System Handler 10"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_9 ,Priority of System Handler 9"
|
|
textline " "
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_8 ,Priority of System Handler 8"
|
|
line.long 0x1C "SHPR3,System Handler Priority Register 3"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_15 ,Priority of System Handler 15(SysTick)"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_14 ,Priority of System Handler 14(PendSV)"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_13 ,Priority of System Handler 13"
|
|
textline " "
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_12 ,Priority of System Handler 12(DebugMonitor)"
|
|
line.long 0x20 "SHCSR,System Handler Control and State Register"
|
|
bitfld.long 0x20 18. " USGFAULTENA ,Enable UsageFault" "Disabled,Enabled"
|
|
bitfld.long 0x20 17. " BUSFAULTENA ,Enable BusFault" "Disabled,Enabled"
|
|
bitfld.long 0x20 16. " MEMFAULTENA ,Enable MemManage fault" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 15. " SVCALLPENDED ,SVCall is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 14. " BUSFAULTPENDED ,BusFault is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 13. " MEMFAULTPENDED ,MemManage is pending" "Not pending,Pending"
|
|
textline " "
|
|
bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 11. " SYSTICKACT ,SysTick is Active" "Not active,Active"
|
|
bitfld.long 0x20 10. " PENDSVACT ,PendSV is Active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x20 8. " MONITORACT ,Monitor is Active" "Not active,Active"
|
|
bitfld.long 0x20 7. " SVCALLACT ,SVCall is Active" "Not active,Active"
|
|
bitfld.long 0x20 3. " USGFAULTACT ,UsageFault is Active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x20 1. " BUSFAULTACT ,BusFault is Active" "Not active,Active"
|
|
bitfld.long 0x20 0. " MEMFAULTACT ,MemManage is Active" "Not active,Active"
|
|
group.byte 0xD28++0x1
|
|
line.byte 0x00 "MMFSR,MemManage Status Register"
|
|
bitfld.byte 0x00 7. " MMARVALID ,Address Valid Flag" "Not valid,Valid"
|
|
bitfld.byte 0x00 5. " MLSPERR ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 4. " MSTKERR ,tacking Access Violations" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x00 3. " MUNSTKERR ,Unstack Access Violations" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 1. " DACCVIOL ,Data Access Violation" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 0. " IACCVIOL ,Instruction Access Violation" "Not occurred,Occurred"
|
|
line.byte 0x01 "BFSR,Bus Fault Status Register"
|
|
bitfld.byte 0x01 7. " BFARVALID ,Address Valid Flag" "Not valid,Valid"
|
|
bitfld.byte 0x01 5. " LSPERR ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 4. " STKERR ,Derived bus fault(exception entry)" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x01 3. " UNSTKERR ,Derived bus fault(exception return)" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 2. " IMPRECISERR ,Imprecise data access error" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 1. " PRECISERR ,Precise data access error" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x01 0. " IBUSERR ,Bus fault on an instruction prefetch" "Not occurred,Occurred"
|
|
group.word 0xD2A++0x1
|
|
line.word 0x00 "USAFAULT,Usage Fault Status Register"
|
|
bitfld.word 0x00 9. " DIVBYZERO ,Divide by zero error" "No error,Error"
|
|
bitfld.word 0x00 8. " UNALIGNED ,Unaligned access error" "No error,Error"
|
|
bitfld.word 0x00 3. " NOCP ,A coprocessor access error" "No error,Error"
|
|
textline " "
|
|
bitfld.word 0x00 2. " INVPC ,An integrity check error" "No error,Error"
|
|
bitfld.word 0x00 1. " INVSTATE ,Invalid Combination of EPSR and Instruction" "No error,Error"
|
|
bitfld.word 0x00 0. " UNDEFINSTR ,Undefined instruction error" "No error,Error"
|
|
group.long 0xD2C++0x07
|
|
line.long 0x00 "HFSR,Hard Fault Status Register"
|
|
bitfld.long 0x00 31. " DEBUGEVT ,Indicates when a Debug event has occurred" "Not occurred,Occurred"
|
|
bitfld.long 0x00 30. " FORCED ,Indicates that a fault with configurable priority" "Not occurred,Occurred"
|
|
bitfld.long 0x00 1. " VECTTBL ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred"
|
|
line.long 0x04 "DFSR,Debug Fault Status Register"
|
|
bitfld.long 0x04 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of EDBGRQ" "Not asserted,Asserted"
|
|
bitfld.long 0x04 3. " VCATCH ,Vector Catch Flag" "Not occurred,Occurred"
|
|
bitfld.long 0x04 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.long 0x04 1. " BKPT ,BKPT Flag" "Not executed,Executed"
|
|
bitfld.long 0x04 0. " HALTED ,Indicates a debug event generated by either" "Not requested,Requested"
|
|
group.long 0xD34++0x0B
|
|
line.long 0x00 "MMFAR,MemManage Fault Address Register"
|
|
line.long 0x04 "BFAR,BusFault Address Register"
|
|
line.long 0x08 "AFSR,Auxiliary Fault Status Register"
|
|
group.long 0xD88++0x03
|
|
line.long 0x00 "CPACR,Coprocessor Access Control Register"
|
|
bitfld.long 0x00 22.--23. " CP11 ,Access privileges for coprocessor 11" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 20.--21. " CP10 ,Access privileges for coprocessor 10" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 14.--15. " CP7 ,Access privileges for coprocessor 7" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " CP6 ,Access privileges for coprocessor 6" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 10.--11. " CP5 ,Access privileges for coprocessor 5" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 8.--9. " CP4 ,Access privileges for coprocessor 4" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 6.--7. " CP3 ,Access privileges for coprocessor 3" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 4.--5. " CP2 ,Access privileges for coprocessor 2" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 2.--3. " CP1 ,Access privileges for coprocessor 1" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 0.--1. " CP0 ,Access privileges for coprocessor 0" "Access denied,Privileged only,Reserved,Full access"
|
|
wgroup.long 0xF00++0x03
|
|
line.long 0x00 "STIR,Software Trigger Interrupt Register"
|
|
hexmask.long.word 0x00 0.--8. 1. " INTID ,Indicates the interrupt to be triggered"
|
|
width 10.
|
|
tree "Feature Registers"
|
|
rgroup.long 0xD40++0x0B
|
|
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
|
|
bitfld.long 0x00 4.--7. " STATE1 ,Thumb instruction set support" ",,,Supported,?..."
|
|
bitfld.long 0x00 0.--3. " STATE0 ,ARM instruction set support" "Not supported,?..."
|
|
line.long 0x04 "ID_PFR1,Processor Feature Register 1"
|
|
bitfld.long 0x04 8.--11. " MPROF ,M profile programmers' model" ",,2-stack,?..."
|
|
line.long 0x08 "ID_DFR0,Debug Feature Register 0"
|
|
bitfld.long 0x08 20.--23. " DBGMOD ,Support for memory-mapped debug model for M profile processors" "Not supported,Supported,?..."
|
|
hgroup.long 0xD4C++0x03
|
|
hide.long 0x00 "ID_AFR0,Auxiliary Feature Register 0"
|
|
rgroup.long 0xD50++0x03
|
|
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
|
|
bitfld.long 0x00 20.--23. " AUXREG ,Indicates the support for Auxiliary registers" "Not supported,ACTLR only,?..."
|
|
bitfld.long 0x00 16.--19. " TCMSUP ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..."
|
|
bitfld.long 0x00 12.--15. " SHRLEV ,Indicates the number of shareability levels implemented" "Level 1,?..."
|
|
textline " "
|
|
bitfld.long 0x00 8.--11. " OUTMSHR ,Indicates the outermost shareability domain implemented" "Non-cacheable,,,,,,,,,,,,,,,Ignored"
|
|
bitfld.long 0x00 4.--7. " PMSASUP ,Indicates support for a PMSA" "Not supported,,,PMSAv7,?..."
|
|
hgroup.long 0xD54++0x03
|
|
hide.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
|
|
rgroup.long 0xD58++0x03
|
|
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
|
|
bitfld.long 0x00 24.--27. " WFISTALL ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..."
|
|
rgroup.long 0xD60++0x13
|
|
line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0"
|
|
bitfld.long 0x00 24.--27. " DIVIDE ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..."
|
|
bitfld.long 0x00 20.--23. " DEBUG ,Indicates the supported debug instructions" "Not supported,BKPT,?..."
|
|
bitfld.long 0x00 16.--19. " COPROC ,Indicates the supported coprocessor instructions" "Not supported,CDP/LDC/MCR/STC,CDP2/LDC2/MCR2/STC2,MCRR/MRRC,MCRR2/MRRC2,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..."
|
|
bitfld.long 0x00 8.--11. " BITFIELD ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..."
|
|
bitfld.long 0x00 4.--7. " BITCOUNT ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..."
|
|
line.long 0x04 "ID_ISAR1,Instruction Set Attributes Register 1"
|
|
bitfld.long 0x04 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..."
|
|
bitfld.long 0x04 20.--23. " IMMEDIATE ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..."
|
|
bitfld.long 0x04 16.--19. " IFTHEN ,Indicates the supported IfThen instructions" "Not supported,IT,?..."
|
|
textline " "
|
|
bitfld.long 0x04 12.--15. " EXTEND ,Indicates the supported Extend instructions" "Not supported,Supported,Supported,?..."
|
|
line.long 0x08 "ID_ISAR2,Instruction Set Attributes Register 2"
|
|
bitfld.long 0x08 24.--27. " REVERSAL ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..."
|
|
bitfld.long 0x08 20.--23. " MULTU ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..."
|
|
bitfld.long 0x08 16.--19. " MULTS ,Indicates the supported advanced signed multiply instructions" "Not supported,Supported,Supported,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x08 12.--15. " MULT ,Indicates the supported additional multiply instructions" "Not supported,MLA,MLA/MLS,?..."
|
|
bitfld.long 0x08 8.--11. " MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..."
|
|
bitfld.long 0x08 4.--7. " MEMHINT ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..."
|
|
textline " "
|
|
bitfld.long 0x08 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,LDRD/STRD,?..."
|
|
line.long 0x0C "ID_ISAR3,Instruction Set Attributes Register 3"
|
|
bitfld.long 0x0C 24.--27. " TRUENOP ,Indicates the support for a true NOP instruction" "Not supported,Supported,?..."
|
|
bitfld.long 0x0C 20.--23. " THUMBCOPY ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..."
|
|
bitfld.long 0x0C 16.--19. " TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,Supported,Supported,?..."
|
|
bitfld.long 0x0C 8.--11. " SVC ,Indicates the supported SVC instructions" "Not supported,SVC,?..."
|
|
bitfld.long 0x0C 4.--7. " SIMD ,Indicates the supported SIMD instructions" "Not supported,Supported,,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 0.--3. " SATURATE ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB,?..."
|
|
line.long 0x10 "ID_ISAR4,Instruction Set Attributes Register 4"
|
|
bitfld.long 0x10 24.--27. " PSR_M ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,?..."
|
|
bitfld.long 0x10 20.--23. " SYNCHPRIMFRAC ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,Supported,Supported,?..."
|
|
bitfld.long 0x10 16.--19. " BARRIER ,Indicates the supported Barrier instructions" "Not supported,DMB/DSB/ISB,?..."
|
|
textline " "
|
|
bitfld.long 0x10 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..."
|
|
bitfld.long 0x10 4.--7. " WITHSHIFTS ,Indicates the support for instructions with shifts" "MOV/shift,Shift LSL 0-3,,Shift other,?..."
|
|
bitfld.long 0x10 0.--3. " UNPRIV ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,LDRBT/LDRT/STRBT/STRT/LDRHT/LDRSBT/LDRSHTSTRHT,?..."
|
|
tree.end
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0C "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0C "CID3,Component ID3"
|
|
tree.end
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Memory Protection Unit"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 15.
|
|
rgroup.long 0xD90++0x03
|
|
line.long 0x00 "MPU_TYPE,MPU Type Register"
|
|
bitfld.long 0x00 16.--23. " IREGION ,Instruction region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
|
|
bitfld.long 0x00 8.--15. " DREGION ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
|
|
bitfld.long 0x00 0. " SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,Supported"
|
|
group.long 0xD94++0x03
|
|
line.long 0x00 "MPU_CTRL,MPU Control Register"
|
|
bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " HFNMIENA ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables the MPU" "Disabled,Enabled"
|
|
group.long 0xD98++0x03
|
|
line.long 0x00 "MPU_RNR,MPU Region Number Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " REGION ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR"
|
|
tree.close "MPU regions"
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0
|
|
group.long 0xD9C++0x03 "Region 0"
|
|
saveout 0xD98 %l 0x0
|
|
line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x0
|
|
line.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 0 (not implemented)"
|
|
saveout 0xD98 %l 0x0
|
|
hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x0
|
|
hide.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1
|
|
group.long 0xD9C++0x03 "Region 1"
|
|
saveout 0xD98 %l 0x1
|
|
line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x1
|
|
line.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 1 (not implemented)"
|
|
saveout 0xD98 %l 0x1
|
|
hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x1
|
|
hide.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2
|
|
group.long 0xD9C++0x03 "Region 2"
|
|
saveout 0xD98 %l 0x2
|
|
line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x2
|
|
line.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 2 (not implemented)"
|
|
saveout 0xD98 %l 0x2
|
|
hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x2
|
|
hide.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3
|
|
group.long 0xD9C++0x03 "Region 3"
|
|
saveout 0xD98 %l 0x3
|
|
line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x3
|
|
line.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 3 (not implemented)"
|
|
saveout 0xD98 %l 0x3
|
|
hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x3
|
|
hide.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4
|
|
group.long 0xD9C++0x03 "Region 4"
|
|
saveout 0xD98 %l 0x4
|
|
line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x4
|
|
line.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 4 (not implemented)"
|
|
saveout 0xD98 %l 0x4
|
|
hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x4
|
|
hide.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5
|
|
group.long 0xD9C++0x03 "Region 5"
|
|
saveout 0xD98 %l 0x5
|
|
line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x5
|
|
line.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 5 (not implemented)"
|
|
saveout 0xD98 %l 0x5
|
|
hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x5
|
|
hide.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6
|
|
group.long 0xD9C++0x03 "Region 6"
|
|
saveout 0xD98 %l 0x6
|
|
line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x6
|
|
line.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 6 (not implemented)"
|
|
saveout 0xD98 %l 0x6
|
|
hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x6
|
|
hide.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7
|
|
group.long 0xD9C++0x03 "Region 7"
|
|
saveout 0xD98 %l 0x7
|
|
line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x7
|
|
line.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 7 (not implemented)"
|
|
saveout 0xD98 %l 0x7
|
|
hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x7
|
|
hide.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8
|
|
group.long 0xD9C++0x03 "Region 8"
|
|
saveout 0xD98 %l 0x8
|
|
line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x8
|
|
line.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 8 (not implemented)"
|
|
saveout 0xD98 %l 0x8
|
|
hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x8
|
|
hide.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9
|
|
group.long 0xD9C++0x03 "Region 9"
|
|
saveout 0xD98 %l 0x9
|
|
line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x9
|
|
line.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 9 (not implemented)"
|
|
saveout 0xD98 %l 0x9
|
|
hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x9
|
|
hide.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA
|
|
group.long 0xD9C++0x03 "Region 10"
|
|
saveout 0xD98 %l 0xA
|
|
line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xA
|
|
line.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 10 (not implemented)"
|
|
saveout 0xD98 %l 0xA
|
|
hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xA
|
|
hide.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB
|
|
group.long 0xD9C++0x03 "Region 11"
|
|
saveout 0xD98 %l 0xB
|
|
line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xB
|
|
line.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 11 (not implemented)"
|
|
saveout 0xD98 %l 0xB
|
|
hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xB
|
|
hide.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC
|
|
group.long 0xD9C++0x03 "Region 12"
|
|
saveout 0xD98 %l 0xC
|
|
line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xC
|
|
line.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 12 (not implemented)"
|
|
saveout 0xD98 %l 0xC
|
|
hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xC
|
|
hide.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD
|
|
group.long 0xD9C++0x03 "Region 13"
|
|
saveout 0xD98 %l 0xD
|
|
line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xD
|
|
line.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 13 (not implemented)"
|
|
saveout 0xD98 %l 0xD
|
|
hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xD
|
|
hide.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE
|
|
group.long 0xD9C++0x03 "Region 14"
|
|
saveout 0xD98 %l 0xE
|
|
line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xE
|
|
line.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 14 (not implemented)"
|
|
saveout 0xD98 %l 0xE
|
|
hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xE
|
|
hide.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF
|
|
group.long 0xD9C++0x03 "Region 15"
|
|
saveout 0xD98 %l 0xF
|
|
line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xF
|
|
line.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 15 (not implemented)"
|
|
saveout 0xD98 %l 0xF
|
|
hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xF
|
|
hide.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
tree.end
|
|
width 0x0b
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Nested Vectored Interrupt Controller"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 6.
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "ICTR,Interrupt Controller Type Register"
|
|
bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,33-64,65-96,97-128,129-160,161-192,193-224,225-240,?..."
|
|
tree "Interrupt Enable Registers"
|
|
width 23.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x100++0x03
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x100++0x7
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x100++0x0B
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x100++0x0F
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x100++0x13
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x100++0x17
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x100++0x1B
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x100++0x1F
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0x100++0x1F
|
|
hide.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Pending Registers"
|
|
width 23.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x200++0x07
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x200++0x0B
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x200++0x0F
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x200++0x13
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x200++0x17
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x200++0x1B
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x200++0x1F
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
else
|
|
hgroup.long 0x200++0x1F
|
|
hide.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Active Bit Registers"
|
|
width 9.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
rgroup.long 0x300++0x03
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
rgroup.long 0x300++0x07
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
rgroup.long 0x300++0x0B
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
rgroup.long 0x300++0x0F
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
rgroup.long 0x300++0x13
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
rgroup.long 0x300++0x17
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
rgroup.long 0x300++0x1B
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
rgroup.long 0x300++0x1F
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x1c "ACTIVE8,Active Bit Register 8"
|
|
bitfld.long 0x1c 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 14. " ACTIVE238 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 13. " ACTIVE237 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 12. " ACTIVE236 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 11. " ACTIVE235 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 10. " ACTIVE234 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x1c 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 8. " ACTIVE232 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 7. " ACTIVE231 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 6. " ACTIVE230 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 5. " ACTIVE229 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 4. " ACTIVE228 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x1c 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 2. " ACTIVE226 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 1. " ACTIVE225 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 0. " ACTIVE224 ,Interrupt Active Flag" "Not active,Active"
|
|
else
|
|
hgroup.long 0x300++0x1F
|
|
hide.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
hide.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
hide.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
hide.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
hide.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
hide.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
hide.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
hide.long 0x1c "ACTIVE8,Active Bit Register 8"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Priority Registers"
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x400++0x1F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x400++0x3F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x400++0x5F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x400++0x7F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x400++0x9F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x400++0xBF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x400++0xDF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
line.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
|
|
hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority"
|
|
hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority"
|
|
hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority"
|
|
line.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
|
|
hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority"
|
|
hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority"
|
|
hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority"
|
|
line.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
|
|
hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority"
|
|
hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority"
|
|
hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority"
|
|
line.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
|
|
hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority"
|
|
hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority"
|
|
hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority"
|
|
line.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
|
|
hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority"
|
|
hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority"
|
|
hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority"
|
|
line.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
|
|
hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority"
|
|
hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority"
|
|
hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority"
|
|
line.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
|
|
hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority"
|
|
hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority"
|
|
hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority"
|
|
line.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
|
|
hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority"
|
|
hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority"
|
|
hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x400++0xEF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
line.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
|
|
hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority"
|
|
hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority"
|
|
hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority"
|
|
line.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
|
|
hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority"
|
|
hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority"
|
|
hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority"
|
|
line.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
|
|
hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority"
|
|
hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority"
|
|
hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority"
|
|
line.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
|
|
hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority"
|
|
hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority"
|
|
hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority"
|
|
line.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
|
|
hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority"
|
|
hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority"
|
|
hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority"
|
|
line.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
|
|
hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority"
|
|
hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority"
|
|
hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority"
|
|
line.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
|
|
hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority"
|
|
hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority"
|
|
hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority"
|
|
line.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
|
|
hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority"
|
|
hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority"
|
|
hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority"
|
|
line.long 0xE0 "IPR56,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority"
|
|
hexmask.long.byte 0xE0 16.--23. 1. " PRI_226 ,Interrupt 226 Priority"
|
|
hexmask.long.byte 0xE0 8.--15. 1. " PRI_225 ,Interrupt 225 Priority"
|
|
hexmask.long.byte 0xE0 0.--7. 1. " PRI_224 ,Interrupt 224 Priority"
|
|
line.long 0xE4 "IPR57,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority"
|
|
hexmask.long.byte 0xE4 16.--23. 1. " PRI_230 ,Interrupt 230 Priority"
|
|
hexmask.long.byte 0xE4 8.--15. 1. " PRI_229 ,Interrupt 229 Priority"
|
|
hexmask.long.byte 0xE4 0.--7. 1. " PRI_228 ,Interrupt 228 Priority"
|
|
line.long 0xE8 "IPR58,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority"
|
|
hexmask.long.byte 0xE8 16.--23. 1. " PRI_234 ,Interrupt 234 Priority"
|
|
hexmask.long.byte 0xE8 8.--15. 1. " PRI_233 ,Interrupt 233 Priority"
|
|
hexmask.long.byte 0xE8 0.--7. 1. " PRI_232 ,Interrupt 232 Priority"
|
|
line.long 0xEC "IPR59,Interrupt Priority Register"
|
|
hexmask.long.byte 0xEC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority"
|
|
hexmask.long.byte 0xEC 16.--23. 1. " PRI_238 ,Interrupt 238 Priority"
|
|
hexmask.long.byte 0xEC 8.--15. 1. " PRI_237 ,Interrupt 237 Priority"
|
|
hexmask.long.byte 0xEC 0.--7. 1. " PRI_236 ,Interrupt 236 Priority"
|
|
else
|
|
hgroup.long 0x400++0xEF
|
|
hide.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hide.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hide.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hide.long 0xC "IPR3,Interrupt Priority Register"
|
|
hide.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hide.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hide.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hide.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hide.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hide.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hide.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hide.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hide.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hide.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hide.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hide.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hide.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hide.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hide.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hide.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hide.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hide.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hide.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hide.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hide.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hide.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hide.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hide.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hide.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hide.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hide.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hide.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hide.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hide.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hide.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hide.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hide.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hide.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hide.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hide.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hide.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hide.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hide.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hide.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hide.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hide.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hide.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hide.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hide.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hide.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hide.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hide.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hide.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hide.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hide.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hide.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hide.long 0xE0 "IPR56,Interrupt Priority Register"
|
|
hide.long 0xE4 "IPR57,Interrupt Priority Register"
|
|
hide.long 0xE8 "IPR58,Interrupt Priority Register"
|
|
hide.long 0xEC "IPR59,Interrupt Priority Register"
|
|
endif
|
|
tree.end
|
|
width 0x0b
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
sif CORENAME()=="CORTEXM4F"
|
|
tree "Floating-point Unit (FPU)"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 8.
|
|
group.long 0xF34++0x0B
|
|
line.long 0x00 "FPCCR,Floating-Point Context Control Register"
|
|
bitfld.long 0x00 31. " ASPEN ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " LSPEN ,Enables lazy context save of FP state" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " MONRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able"
|
|
textline " "
|
|
bitfld.long 0x00 6. " BFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able"
|
|
bitfld.long 0x00 5. " MMRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able"
|
|
bitfld.long 0x00 4. " HFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able"
|
|
textline " "
|
|
bitfld.long 0x00 3. " THREAD ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread"
|
|
bitfld.long 0x00 1. " USER ,Indicates the privilege level of the software executing" "Privileged,Unprivileged"
|
|
bitfld.long 0x00 0. " LSPACT ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active"
|
|
line.long 0x04 "FPCAR,Floating-Point Context Address Register"
|
|
hexmask.long 0x04 3.--31. 0x8 " ADDRESS ,The location of the unpopulated floating-point register space allocated on an exception stack frame"
|
|
line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register"
|
|
bitfld.long 0x08 26. " AHP ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative"
|
|
bitfld.long 0x08 25. " DN ,Default value for FPSCR.DN" "NaN operands,Any operation"
|
|
bitfld.long 0x08 24. " FZ ,Default value for FPSCR.FZ" "No Flush mode,Flush mode"
|
|
textline " "
|
|
bitfld.long 0x08 22.--23. " RMODE ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero"
|
|
rgroup.long 0xF40++0x07
|
|
line.long 0x00 "MVFR0,Media and FP Feature Register 0"
|
|
bitfld.long 0x00 28.--31. " FPRNDMOD ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..."
|
|
bitfld.long 0x00 24.--27. " SRTERR ,Indicates the hardware support for FP short vectors" "Not supported,?..."
|
|
bitfld.long 0x00 20.--23. " SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x00 16.--19. " DIV ,Indicates the hardware support for FP divide operations" ",Supported,?..."
|
|
bitfld.long 0x00 12.--15. " FPEXTRP ,Indicates whether the FP hardware implementation supports exception trapping" "Not supported,?..."
|
|
bitfld.long 0x00 8.--11. " DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " SNGLPREC ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..."
|
|
bitfld.long 0x00 0.--3. " A_SIMD ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..."
|
|
line.long 0x04 "MVFR1,Media and FP Feature Register 1"
|
|
bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..."
|
|
bitfld.long 0x04 24.--27. " FP_HPFP ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..."
|
|
textline " "
|
|
bitfld.long 0x04 4.--7. " D_NAN ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..."
|
|
bitfld.long 0x04 0.--3. " FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Full denorm. num. arit.,?..."
|
|
width 0xB
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
endif
|
|
tree "Debug"
|
|
tree "Core Debug"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 7.
|
|
group.long 0xD30++0x03
|
|
line.long 0x00 "DFSR,Debug Fault Status Register"
|
|
eventfld.long 0x00 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated"
|
|
eventfld.long 0x00 3. " VCATCH ,Indicates triggering of a Vector catch" "Not triggered,Triggered"
|
|
eventfld.long 0x00 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not generated,Generated"
|
|
newline
|
|
eventfld.long 0x00 1. " BKPT ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated"
|
|
eventfld.long 0x00 0. " HALTED ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated"
|
|
newline
|
|
hgroup.long 0xDF0++0x03
|
|
hide.long 0x00 "DHCSR,Debug Halting Control and Status Register"
|
|
in
|
|
newline
|
|
wgroup.long 0xDF4++0x03
|
|
line.long 0x00 "DCRSR,Debug Core Register Selector Register"
|
|
bitfld.long 0x00 16. " REGWNR ,Register Read/Write" "Read,Write"
|
|
hexmask.long.byte 0x00 0.--6. 1. " REGSEL ,Specifies the ARM core register or special-purpose register or Floating-point extension register"
|
|
group.long 0xDF8++0x03
|
|
line.long 0x00 "DCRDR,Debug Core Register Data Register"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000)
|
|
group.long 0xDFC++0x03
|
|
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
|
|
bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1"
|
|
bitfld.long 0x00 18. " MON_STEP ,Setting this bit to 1 makes the step request pending" "No step,Step"
|
|
newline
|
|
bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
|
|
bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
|
|
else
|
|
group.long 0xDFC++0x03
|
|
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
|
|
bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1"
|
|
newline
|
|
bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
|
|
bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Flash Patch and Breakpoint Unit (FPB)"
|
|
sif COMPonent.AVAILABLE("FPB")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))
|
|
width 10.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "FP_CTRL,Flash Patch Control Register"
|
|
bitfld.long 0x00 28.--31. " REV ,Flash Patch Breakpoint architecture revision" "Version 1,Version 2,?..."
|
|
rbitfld.long 0x00 4.--7. 12.--14. " NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127"
|
|
bitfld.long 0x00 1. " KEY ,Key Field" "Low,High"
|
|
bitfld.long 0x00 0. " ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled"
|
|
textline ""
|
|
line.long 0x04 "FP_REMAP,Flash Patch Remap Register"
|
|
bitfld.long 0x04 29. " RMPSPT ,Indicates whether the FPB unit supports flash patch remap" "Not supported,SRAM region"
|
|
hexmask.long.tbyte 0x04 5.--28. 0x20 " REMAP ,Remap Base Address Field"
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00)
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00)
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00)
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00)
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00)
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00)
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00)
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00)
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0c "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0c "CID3,Component ID3"
|
|
tree.end
|
|
width 0xB
|
|
else
|
|
newline
|
|
textline "FPB component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Data Watchpoint and Trace Unit (DWT)"
|
|
sif COMPonent.AVAILABLE("DWT")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))
|
|
width 15.
|
|
group.long 0x00++0x1B
|
|
line.long 0x00 "DWT_CTRL,Control Register"
|
|
rbitfld.long 0x00 28.--31. " NUMCOMP ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
rbitfld.long 0x00 27. " NOTRCPKT ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported"
|
|
rbitfld.long 0x00 26. " NOEXTTRIG ,Shows whether the implementation includes external match signals" "Supported,Not supported"
|
|
textline " "
|
|
rbitfld.long 0x00 25. " NOCYCCNT ,Shows whether the implementation supports a cycle counter" "Supported,Not supported"
|
|
rbitfld.long 0x00 24. " NOPRFCNT ,Shows whether the implementation supports the profiling counters" "Supported,Not supported"
|
|
bitfld.long 0x00 22. " CYCEVTENA ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 21. " FOLDEVTENA ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " LSUEVTENA ,Enables generation of the LSU counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 18. " EXCEVTENA ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " CPIEVTENA ,Enables generation of the CPI counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " EXCTRCENA ,Enables generation of exception trace" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 12. " PCSAMPLEENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled"
|
|
bitfld.long 0x00 10.--11. " SYNCTAP ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]"
|
|
bitfld.long 0x00 9. " CYCTAP ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]"
|
|
textline " "
|
|
bitfld.long 0x00 5.--8. " POSTINIT ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 1.--4. " POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 0. " CYCCNTENA ,Enables CYCCNT" "Disabled,Enabled"
|
|
line.long 0x04 "DWT_CYCCNT,Cycle Count Register"
|
|
line.long 0x08 "DWT_CPICNT,CPI Count Register"
|
|
hexmask.long.byte 0x08 0.--7. 1. " CPICNT ,The base CPI counter"
|
|
line.long 0x0c "DWT_EXCCNT,Exception Overhead Count Register"
|
|
hexmask.long.byte 0x0c 0.--7. 1. " EXCCNT ,The exception overhead counter"
|
|
line.long 0x10 "DWT_SLEEPCNT,Sleep Count Register"
|
|
hexmask.long.byte 0x10 0.--7. 1. " SLEEPCNT ,Sleep Counter"
|
|
line.long 0x14 "DWT_LSUCNT,LSU Count Register"
|
|
hexmask.long.byte 0x14 0.--7. 1. " LSUCNT ,Load-store counter"
|
|
line.long 0x18 "DWT_FOLDCNT,Folded-instruction Count Register"
|
|
hexmask.long.byte 0x18 0.--7. 1. " FOLDCNT ,Folded-instruction counter"
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "DWT_PCSR,Program Counter Sample register"
|
|
textline " "
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "DWT_COMP0,DWT Comparator Register 0"
|
|
line.long 0x04 "DWT_MASK0,DWT Mask Registers 0"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x20)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x00)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x180)==0x80)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet,UNPREDICTABLE,UNPREDICTABLE,Generate watchpoint debug event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,CMPMATCH[N] event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
else
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x30)++0x07
|
|
line.long 0x00 "DWT_COMP1,DWT Comparator Register 1"
|
|
line.long 0x04 "DWT_MASK1,DWT Mask Registers 1"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x20)
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x00)
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x40)++0x07
|
|
line.long 0x00 "DWT_COMP2,DWT Comparator Register 2"
|
|
line.long 0x04 "DWT_MASK2,DWT Mask Registers 2"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x20)
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x00)
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x50)++0x07
|
|
line.long 0x00 "DWT_COMP3,DWT Comparator Register 3"
|
|
line.long 0x04 "DWT_MASK3,DWT Mask Registers 3"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x20)
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x00)
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0c "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0c "CID3,Component ID3"
|
|
tree.end
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "DWT component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree.end
|
|
AUTOINDENT.POP
|
|
tree.end
|
|
config 16. 8.
|
|
tree "ITM (Instrumentation Trace Macrocell)"
|
|
base ad:0xE0000000
|
|
width 9.
|
|
tree "Stimulus Port registers 0-31"
|
|
wgroup.long 0x00++0x7F "WRITES"
|
|
line.long 0x0 "STIM0,Stimulus Port Register 0"
|
|
line.long 0x4 "STIM1,Stimulus Port Register 1"
|
|
line.long 0x8 "STIM2,Stimulus Port Register 2"
|
|
line.long 0xC "STIM3,Stimulus Port Register 3"
|
|
line.long 0x10 "STIM4,Stimulus Port Register 4"
|
|
line.long 0x14 "STIM5,Stimulus Port Register 5"
|
|
line.long 0x18 "STIM6,Stimulus Port Register 6"
|
|
line.long 0x1C "STIM7,Stimulus Port Register 7"
|
|
line.long 0x20 "STIM8,Stimulus Port Register 8"
|
|
line.long 0x24 "STIM9,Stimulus Port Register 9"
|
|
line.long 0x28 "STIM10,Stimulus Port Register 10"
|
|
line.long 0x2C "STIM11,Stimulus Port Register 11"
|
|
line.long 0x30 "STIM12,Stimulus Port Register 12"
|
|
line.long 0x34 "STIM13,Stimulus Port Register 13"
|
|
line.long 0x38 "STIM14,Stimulus Port Register 14"
|
|
line.long 0x3C "STIM15,Stimulus Port Register 15"
|
|
line.long 0x40 "STIM16,Stimulus Port Register 16"
|
|
line.long 0x44 "STIM17,Stimulus Port Register 17"
|
|
line.long 0x48 "STIM18,Stimulus Port Register 18"
|
|
line.long 0x4C "STIM19,Stimulus Port Register 19"
|
|
line.long 0x50 "STIM20,Stimulus Port Register 20"
|
|
line.long 0x54 "STIM21,Stimulus Port Register 21"
|
|
line.long 0x58 "STIM22,Stimulus Port Register 22"
|
|
line.long 0x5C "STIM23,Stimulus Port Register 23"
|
|
line.long 0x60 "STIM24,Stimulus Port Register 24"
|
|
line.long 0x64 "STIM25,Stimulus Port Register 25"
|
|
line.long 0x68 "STIM26,Stimulus Port Register 26"
|
|
line.long 0x6C "STIM27,Stimulus Port Register 27"
|
|
line.long 0x70 "STIM28,Stimulus Port Register 28"
|
|
line.long 0x74 "STIM29,Stimulus Port Register 29"
|
|
line.long 0x78 "STIM30,Stimulus Port Register 30"
|
|
line.long 0x7C "STIM31,Stimulus Port Register 31"
|
|
rgroup.long 0x00++0x7F "READS"
|
|
line.long 0x0 "STIM0,Stimulus Port Register 0"
|
|
bitfld.long 0x0 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x4 "STIM1,Stimulus Port Register 1"
|
|
bitfld.long 0x4 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x8 "STIM2,Stimulus Port Register 2"
|
|
bitfld.long 0x8 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0xC "STIM3,Stimulus Port Register 3"
|
|
bitfld.long 0xC 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x10 "STIM4,Stimulus Port Register 4"
|
|
bitfld.long 0x10 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x14 "STIM5,Stimulus Port Register 5"
|
|
bitfld.long 0x14 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x18 "STIM6,Stimulus Port Register 6"
|
|
bitfld.long 0x18 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x1C "STIM7,Stimulus Port Register 7"
|
|
bitfld.long 0x1C 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x20 "STIM8,Stimulus Port Register 8"
|
|
bitfld.long 0x20 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x24 "STIM9,Stimulus Port Register 9"
|
|
bitfld.long 0x24 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x28 "STIM10,Stimulus Port Register 10"
|
|
bitfld.long 0x28 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x2C "STIM11,Stimulus Port Register 11"
|
|
bitfld.long 0x2C 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x30 "STIM12,Stimulus Port Register 12"
|
|
bitfld.long 0x30 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x34 "STIM13,Stimulus Port Register 13"
|
|
bitfld.long 0x34 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x38 "STIM14,Stimulus Port Register 14"
|
|
bitfld.long 0x38 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x3C "STIM15,Stimulus Port Register 15"
|
|
bitfld.long 0x3C 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x40 "STIM16,Stimulus Port Register 16"
|
|
bitfld.long 0x40 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x44 "STIM17,Stimulus Port Register 17"
|
|
bitfld.long 0x44 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x48 "STIM18,Stimulus Port Register 18"
|
|
bitfld.long 0x48 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x4C "STIM19,Stimulus Port Register 19"
|
|
bitfld.long 0x4C 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x50 "STIM20,Stimulus Port Register 20"
|
|
bitfld.long 0x50 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x54 "STIM21,Stimulus Port Register 21"
|
|
bitfld.long 0x54 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x58 "STIM22,Stimulus Port Register 22"
|
|
bitfld.long 0x58 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x5C "STIM23,Stimulus Port Register 23"
|
|
bitfld.long 0x5C 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x60 "STIM24,Stimulus Port Register 24"
|
|
bitfld.long 0x60 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x64 "STIM25,Stimulus Port Register 25"
|
|
bitfld.long 0x64 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x68 "STIM26,Stimulus Port Register 26"
|
|
bitfld.long 0x68 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x6C "STIM27,Stimulus Port Register 27"
|
|
bitfld.long 0x6C 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x70 "STIM28,Stimulus Port Register 28"
|
|
bitfld.long 0x70 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x74 "STIM29,Stimulus Port Register 29"
|
|
bitfld.long 0x74 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x78 "STIM30,Stimulus Port Register 30"
|
|
bitfld.long 0x78 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
line.long 0x7C "STIM31,Stimulus Port Register 31"
|
|
bitfld.long 0x7C 0. " FIFOREADY ,Indicates whether the stimulus port FIFO can accept data" "Disabled,Enabled"
|
|
tree.end
|
|
textline " "
|
|
group.long 0xe00++0x03
|
|
line.long 0x00 "TER,ITM Trace Enable Register"
|
|
bitfld.long 0x00 31. " STIMENA[31] ,Enables Stimulus port 31" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " [30] ,Enables Stimulus port 30" "Disabled,Enabled"
|
|
bitfld.long 0x00 29. " [29] ,Enables Stimulus port 29" "Disabled,Enabled"
|
|
bitfld.long 0x00 28. " [28] ,Enables Stimulus port 28" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 27. " [27] ,Enables Stimulus port 27" "Disabled,Enabled"
|
|
bitfld.long 0x00 26. " [26] ,Enables Stimulus port 26" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " [25] ,Enables Stimulus port 25" "Disabled,Enabled"
|
|
bitfld.long 0x00 24. " [24] ,Enables Stimulus port 24" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 23. " [23] ,Enables Stimulus port 23" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " [22] ,Enables Stimulus port 22" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " [21] ,Enables Stimulus port 21" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " [20] ,Enables Stimulus port 20" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19. " [19] ,Enables Stimulus port 19" "Disabled,Enabled"
|
|
bitfld.long 0x00 18. " [18] ,Enables Stimulus port 18" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " [17] ,Enables Stimulus port 17" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " [16] ,Enables Stimulus port 16" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " [15] ,Enables Stimulus port 15" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " [14] ,Enables Stimulus port 14" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " [13] ,Enables Stimulus port 13" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " [12] ,Enables Stimulus port 12" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11. " [11] ,Enables Stimulus port 11" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " [10] ,Enables Stimulus port 10" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " [9] ,Enables Stimulus port 9" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " [8] ,Enables Stimulus port 8" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " [7] ,Enables Stimulus port 7" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " [6] ,Enables Stimulus port 6" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " [5] ,Enables Stimulus port 5" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " [4] ,Enables Stimulus port 4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " [3] ,Enables Stimulus port 3" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " [2] ,Enables Stimulus port 2" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " [1] ,Enables Stimulus port 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " [0] ,Enables Stimulus port 0" "Disabled,Enabled"
|
|
group.long 0xe40++0x03
|
|
line.long 0x00 "TPR,Trace Privilege Register"
|
|
bitfld.long 0x00 3. " PRIVMASK[3] ,Bit mask to enable unprivileged access to ITM stimulus ports [31:24]" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " [2] ,Bit mask to enable unprivileged access to ITM stimulus ports [23:16]" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " [1] ,Bit mask to enable unprivileged access to ITM stimulus ports [15:8]" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " [0] ,Bit mask to enable unprivileged access to ITM stimulus ports [7:0]" "Disabled,Enabled"
|
|
group.long 0xe80++0x03
|
|
line.long 0x00 "TCR,Trace Control Register"
|
|
bitfld.long 0x00 23. " BUSY ,Indicates whether the ITM is currently processing events" "Not busy,Busy"
|
|
hexmask.long.byte 0x00 16.--22. 1. " ATB_ID ,ATB ID for CoreSight system."
|
|
bitfld.long 0x00 10.--11. " TS_FREQ ,Global timestamp frequency" "Disabled,128 cycles,8192 cycles,After every packet"
|
|
textline " "
|
|
bitfld.long 0x00 8.--9. " TS_PRESCALE ,Timestamp Prescaler" "Disabled,4,16,64"
|
|
bitfld.long 0x00 4. " SWV_ENABLE ,Enable SWV behavior count on TPIUEMIT and TPIUBAUD" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " DWT_ENABLE ,Enables the DWT stimulus" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " SYNC_ENABLE ,Enables sync packets for TPIU" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " TS_ENABLE ,Enables differential timestamps" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " ITM_ENABLE ,Enable ITM" "Disabled,Enabled"
|
|
group.long 0xFB0++0x03
|
|
line.long 0x00 "LOCKAREG,Lock Access Register"
|
|
rgroup.long 0xFB4++0x03
|
|
line.long 0x00 "LOCKSREG,Lock Status Register"
|
|
bitfld.long 0x00 2. " BYTEACC ,8-bit lock access implemented" "Not implemented,"
|
|
bitfld.long 0x00 1. " ACCESS ,Access possible" "No,"
|
|
bitfld.long 0x00 0. " PRESENT ,Indicates that a lock mechanism exists for this component" ",Present"
|
|
tree "CoreSight Identification Registers"
|
|
width 6.
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0c "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0c "CID3,Component ID3"
|
|
tree.end
|
|
width 0xb
|
|
tree.end
|
|
tree "MCUCTRL (MCU Miscellaneous Control Logic)"
|
|
base ad:0x40020000
|
|
width 16.
|
|
rgroup.long 0x00++0x0F
|
|
line.long 0x00 "CHIP_INFO,Chip Information Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " CLASS ,Device class"
|
|
bitfld.long 0x00 20.--23. " FLASH ,Device flash size" ",,,256K,512K,?..."
|
|
bitfld.long 0x00 16.--19. " RAM ,Device RAM size" "32K,64K,?..."
|
|
bitfld.long 0x00 12.--15. " MAJORREV ,Major device revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 8.--11. " MINORREV ,Minor device revision number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 6.--7. " PKG ,Device package type" ",,BGA,CSP"
|
|
bitfld.long 0x00 3.--5. " PINS ,Number of pins" ",41/64 pins,?..."
|
|
bitfld.long 0x00 1.--2. " TEMP ,Device temperature range" "Commercial,?..."
|
|
textline " "
|
|
bitfld.long 0x00 0. " QUAL ,Device qualified" "Prototype,Qualified"
|
|
line.long 0x04 "CHIPID0,Unique Chip ID 0"
|
|
line.long 0x08 "CHIPID1,Unique Chip ID 1"
|
|
line.long 0x0C "CHIPREV,Chip Revision"
|
|
hexmask.long.byte 0x0C 0.--7. 1. " REVISION ,Chip Revision Number"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "SUPPLYSRC,Memory and Core Voltage Supply Source Select Register"
|
|
bitfld.long 0x00 1. " COREBUCKEN ,Enable Core Buck as the supply for the low-voltage power domain" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " MEMBUCKEN ,Enable Memory Buck as the supply for the Flash and SRAM power domain" "Disabled,Enabled"
|
|
rgroup.long 0x14++0x03
|
|
line.long 0x00 "SUPPLYSTATUS,Memory and Core Voltage Supply Source Status Register"
|
|
bitfld.long 0x00 1. " COREBUCKON ,Indicates whether the Core low-voltage domain is supplied from the LDO or the Buck" "LDO,Buck"
|
|
bitfld.long 0x00 0. " MEMBUCKON ,Indicate whether the Memory power domain is supplied from the LDO or the Buck" "LDO,Buck"
|
|
group.long 0xFC++0x03
|
|
line.long 0x00 "BANDGAPEN,Band Gap Enable"
|
|
bitfld.long 0x00 0. " BGPEN ,Bandgap Enable" "Disabled,Enabled"
|
|
group.long 0x140++0x0B
|
|
line.long 0x00 "SRAMPWDINSLEEP,Powerdown an SRAM Bank in Deep Sleep mode"
|
|
bitfld.long 0x00 7. " BANK7 ,Force SRAM Bank 7 to powerdown in deep sleep mode" "No,Yes"
|
|
bitfld.long 0x00 6. " BANK6 ,Force SRAM Bank 6 to powerdown in deep sleep mode" "No,Yes"
|
|
bitfld.long 0x00 5. " BANK5 ,Force SRAM Bank 5 to powerdown in deep sleep mode" "No,Yes"
|
|
bitfld.long 0x00 4. " BANK4 ,Force SRAM Bank 4 to powerdown in deep sleep mode" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 3. " BANK3 ,Force SRAM Bank 3 to powerdown in deep sleep mode" "No,Yes"
|
|
bitfld.long 0x00 2. " BANK2 ,Force SRAM Bank 2 to powerdown in deep sleep mode" "No,Yes"
|
|
bitfld.long 0x00 1. " BANK1 ,Force SRAM Bank 1 to powerdown in deep sleep mode" "No,Yes"
|
|
bitfld.long 0x00 0. " BANK0 ,Force SRAM Bank 0 to powerdown in deep sleep mode" "No,Yes"
|
|
line.long 0x04 "SRAMPWRDIS,Disables individual banks of the SRAM array"
|
|
bitfld.long 0x04 7. " BANK7 ,Disable bank 7" "No,Yes"
|
|
bitfld.long 0x04 6. " BANK6 ,Disable bank 6" "No,Yes"
|
|
bitfld.long 0x04 5. " BANK5 ,Disable bank 5" "No,Yes"
|
|
bitfld.long 0x04 4. " BANK4 ,Disable bank 4" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 3. " BANK3 ,Disable bank 3" "No,Yes"
|
|
bitfld.long 0x04 2. " BANK2 ,Disable bank 2" "No,Yes"
|
|
bitfld.long 0x04 1. " BANK1 ,Disable bank 1" "No,Yes"
|
|
bitfld.long 0x04 0. " BANK0 ,Disable bank 0" "No,Yes"
|
|
line.long 0x08 "FLASHPWRDIS,Disables individual banks of the Flash array"
|
|
bitfld.long 0x08 1. " BANK1 ,Disable bank 1" "No,Yes"
|
|
bitfld.long 0x08 0. " BANK0 ,Disable bank 0" "No,Yes"
|
|
rgroup.long 0x1C0++0x0B
|
|
line.long 0x00 "ICODEFAULTADDR,ICODE bus address which was present when a bus fault occurred"
|
|
line.long 0x04 "DCODEFAULTADDR,DCODE bus address which was present when a bus fault occurred"
|
|
line.long 0x08 "SYSFAULTADDR,System bus address which was present when a bus fault occurred"
|
|
group.long 0x1CC++0x07
|
|
line.long 0x00 "FAULTSTATUS,Status of the bus decoders' fault detection"
|
|
bitfld.long 0x00 2. " SYS ,SYS Bus Decoder Fault Detected bit" "No fault,Fault"
|
|
bitfld.long 0x00 1. " DCODE ,DCODE Bus Decoder Fault Detected bit" "No fault,Fault"
|
|
bitfld.long 0x00 0. " ICODE ,The ICODE Bus Decoder Fault Detected bit" "No fault,Fault"
|
|
line.long 0x04 "FAULTCAPTUREEN,Enable the fault capture registers"
|
|
bitfld.long 0x04 0. " ENABLE ,Fault Capture Enable field" "Disabled,Enabled"
|
|
group.long 0x250++0x03
|
|
line.long 0x00 "TPIUCTRL,TPIU Control Register"
|
|
bitfld.long 0x00 8.--9. " CLKSEL ,This field selects the frequency of the ARM M4 TPIU port" "Low power,6 MHz,3 MHz,1.5 MHz"
|
|
bitfld.long 0x00 0. " ENABLE ,TPIU Enable field" "Disabled,Enabled"
|
|
width 0xB
|
|
tree.end
|
|
tree.open "I2C Master (I2C/SPI Master)"
|
|
tree "I2C0 Master"
|
|
base ad:0x50004000
|
|
width 11.
|
|
hgroup.long 0x00++0x03
|
|
hide.long 0x00 "FIFO,FIFO Access Port Register"
|
|
in
|
|
rgroup.long 0x100++0x07
|
|
line.long 0x00 "FIFOPTR,Current FIFO Pointers Register"
|
|
sif (cpu()=="AMAPH1KK")
|
|
hexmask.long.byte 0x00 16.--23. 1. " FIFOREM ,Number of bytes remaining in the FIFO"
|
|
hexmask.long.byte 0x00 0.--7. 1. " FIFOSIZ ,Number of bytes currently in the FIFO"
|
|
else
|
|
hexmask.long.byte 0x00 16.--22. 1. " FIFOREM ,Number of bytes remaining in the FIFO"
|
|
hexmask.long.byte 0x00 0.--6. 1. " FIFOSIZ ,Number of bytes currently in the FIFO"
|
|
endif
|
|
line.long 0x04 "TLNGTH,Transfer Length Register"
|
|
hexmask.long.word 0x04 0.--11. 1. " TLNGTH ,Remaining transfer length"
|
|
group.long 0x108++0x0F
|
|
line.long 0x00 "FIFOTHR,FIFO Threshold Configuration Register"
|
|
sif (cpu()=="AMAPH1KK")
|
|
hexmask.long.byte 0x00 8.--14. 1. " FIFOWTHR ,FIFO write threshold"
|
|
hexmask.long.byte 0x00 0.--6. 1. " FIFORTHR ,FIFO read threshold"
|
|
else
|
|
bitfld.long 0x00 8.--13. " FIFOWTHR ,FIFO write threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 0.--5. " FIFORTHR ,FIFO read threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
endif
|
|
line.long 0x04 "CLKCFG,I/O Clock Configuration"
|
|
hexmask.long.byte 0x04 24.--31. 1. " TOTPER ,Clock total count minus 1"
|
|
hexmask.long.byte 0x04 16.--23. 1. " LOWPER ,Clock low count minus 1"
|
|
bitfld.long 0x04 12. " DIVEN ,Enable clock division by TOTPER" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 11. " DIV3 ,Enable divide by 3" "Disabled,Enabled"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 8.--10. " FSEL ,Input clock frequency" "Minimal power,HFRC,HFRC/2,HFRC/4,HFRC/8,HFRC/16,HFRC/32,HFRC/64"
|
|
else
|
|
bitfld.long 0x04 8.--10. " FSEL ,Input clock frequency" "HFRC/64,HFRC/1,HFRC/2,HFRC/4,HFRC/8,HFRC/16,HFRC/32,?..."
|
|
endif
|
|
line.long 0x08 "CMD,Command Register"
|
|
line.long 0x0C "CMDRPT,Command Repeat Register"
|
|
bitfld.long 0x0C 0.--4. " CMDRPT ,Command repeat count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rgroup.long 0x118++0x03
|
|
line.long 0x00 "STATUS,Status Register"
|
|
bitfld.long 0x00 2. " IDLEST ,I/O state machine" "Busy,Idle"
|
|
bitfld.long 0x00 1. " CMDACT ,I/O command" "Inactive,Active"
|
|
bitfld.long 0x00 0. " ERR ,Error interrupt" "No error,Error"
|
|
group.long 0x11C++0x03
|
|
line.long 0x00 "CFG,I/O Master Configuration Register"
|
|
bitfld.long 0x00 31. " IFCEN ,Enable the IO Master" "Disabled,Enabled"
|
|
textline " "
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 14. " RDFCPOL ,Read flow control signal polarity" "High,Low"
|
|
bitfld.long 0x00 13. " WTFCPOL ,Write flow control signal polarity" "High,Low"
|
|
bitfld.long 0x00 12. " WTFCIRQ ,Write mode flow control signal" "MISO,IRQ"
|
|
bitfld.long 0x00 10. " MOSIINV ,This bit invewrts MOSI when flow control is enabled" "NORMAL,INVERT"
|
|
textline " "
|
|
bitfld.long 0x00 9. " RDFC ,Enable read mode flow control" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " WTFC ,Enable write mode flow control" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--5. " STARTRD ,Preread timing" "0 cycles,1 cycle,2 cycles,3 cycles"
|
|
bitfld.long 0x00 3. " FULLDUP ,Full duplex mode" "Half duplex,Full duplex"
|
|
textline " "
|
|
endif
|
|
bitfld.long 0x00 2. " SPHA ,Select SPI phase" "Leading,Trailing"
|
|
bitfld.long 0x00 1. " SPOL ,Select SPI polarity" "0,1"
|
|
bitfld.long 0x00 0. " IFCSEL ,Select I/O interface" "I2C,SPI"
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,IO Master Interrupts Enable Register"
|
|
bitfld.long 0x00 10. " ARB ,Arbitration loss interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " STOP ,STOP command interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " START ,START command interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ICMD ,Illegal command interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " IACC ,Illegal FIFO access interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " WTLEN ,Write length mismatch interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " NAK ,I2C NAK interrupt" "Disabled,Enabled"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 3. " FOVFL ,Write FIFO overflow interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " FUNDFL ,Read FIFO underflow interrupt" "Disabled,Enabled"
|
|
else
|
|
bitfld.long 0x00 3. " FOVFL ,Read FIFO overflow interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " FUNDFL ,Write FIFO underflow interrupt" "Disabled,Enabled"
|
|
endif
|
|
textline " "
|
|
bitfld.long 0x00 1. " THR ,FIFO threshold interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CMDCMP ,Command complete interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,IO Master Interrupts Status Register"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x04 10. " ARB ,Arbitration loss interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 9. 0x08 9. 0x04 9. " STOP ,STOP command interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x04 8. " START ,START command interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " ICMD ,Illegal command interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " IACC ,Illegal FIFO access interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " WTLEN ,Write length mismatch interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " NAK ,I2C NAK interrupt" "No interrupt,Interrupt"
|
|
sif (cpu()=="AMAPH1KK")
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " FOVFL ,Write FIFO overflow interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " FUNDFL ,Read FIFO underflow interrupt" "No interrupt,Interrupt"
|
|
else
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " FOVFL ,Read FIFO overflow interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " FUNDFL ,Write FIFO underflow interrupt" "No interrupt,Interrupt"
|
|
endif
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " THR ,FIFO threshold interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CMDCMP ,Command complete interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "I2C1 Master"
|
|
base ad:0x50005000
|
|
width 11.
|
|
hgroup.long 0x00++0x03
|
|
hide.long 0x00 "FIFO,FIFO Access Port Register"
|
|
in
|
|
rgroup.long 0x100++0x07
|
|
line.long 0x00 "FIFOPTR,Current FIFO Pointers Register"
|
|
sif (cpu()=="AMAPH1KK")
|
|
hexmask.long.byte 0x00 16.--23. 1. " FIFOREM ,Number of bytes remaining in the FIFO"
|
|
hexmask.long.byte 0x00 0.--7. 1. " FIFOSIZ ,Number of bytes currently in the FIFO"
|
|
else
|
|
hexmask.long.byte 0x00 16.--22. 1. " FIFOREM ,Number of bytes remaining in the FIFO"
|
|
hexmask.long.byte 0x00 0.--6. 1. " FIFOSIZ ,Number of bytes currently in the FIFO"
|
|
endif
|
|
line.long 0x04 "TLNGTH,Transfer Length Register"
|
|
hexmask.long.word 0x04 0.--11. 1. " TLNGTH ,Remaining transfer length"
|
|
group.long 0x108++0x0F
|
|
line.long 0x00 "FIFOTHR,FIFO Threshold Configuration Register"
|
|
sif (cpu()=="AMAPH1KK")
|
|
hexmask.long.byte 0x00 8.--14. 1. " FIFOWTHR ,FIFO write threshold"
|
|
hexmask.long.byte 0x00 0.--6. 1. " FIFORTHR ,FIFO read threshold"
|
|
else
|
|
bitfld.long 0x00 8.--13. " FIFOWTHR ,FIFO write threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 0.--5. " FIFORTHR ,FIFO read threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
endif
|
|
line.long 0x04 "CLKCFG,I/O Clock Configuration"
|
|
hexmask.long.byte 0x04 24.--31. 1. " TOTPER ,Clock total count minus 1"
|
|
hexmask.long.byte 0x04 16.--23. 1. " LOWPER ,Clock low count minus 1"
|
|
bitfld.long 0x04 12. " DIVEN ,Enable clock division by TOTPER" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 11. " DIV3 ,Enable divide by 3" "Disabled,Enabled"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 8.--10. " FSEL ,Input clock frequency" "Minimal power,HFRC,HFRC/2,HFRC/4,HFRC/8,HFRC/16,HFRC/32,HFRC/64"
|
|
else
|
|
bitfld.long 0x04 8.--10. " FSEL ,Input clock frequency" "HFRC/64,HFRC/1,HFRC/2,HFRC/4,HFRC/8,HFRC/16,HFRC/32,?..."
|
|
endif
|
|
line.long 0x08 "CMD,Command Register"
|
|
line.long 0x0C "CMDRPT,Command Repeat Register"
|
|
bitfld.long 0x0C 0.--4. " CMDRPT ,Command repeat count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rgroup.long 0x118++0x03
|
|
line.long 0x00 "STATUS,Status Register"
|
|
bitfld.long 0x00 2. " IDLEST ,I/O state machine" "Busy,Idle"
|
|
bitfld.long 0x00 1. " CMDACT ,I/O command" "Inactive,Active"
|
|
bitfld.long 0x00 0. " ERR ,Error interrupt" "No error,Error"
|
|
group.long 0x11C++0x03
|
|
line.long 0x00 "CFG,I/O Master Configuration Register"
|
|
bitfld.long 0x00 31. " IFCEN ,Enable the IO Master" "Disabled,Enabled"
|
|
textline " "
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 14. " RDFCPOL ,Read flow control signal polarity" "High,Low"
|
|
bitfld.long 0x00 13. " WTFCPOL ,Write flow control signal polarity" "High,Low"
|
|
bitfld.long 0x00 12. " WTFCIRQ ,Write mode flow control signal" "MISO,IRQ"
|
|
bitfld.long 0x00 10. " MOSIINV ,This bit invewrts MOSI when flow control is enabled" "NORMAL,INVERT"
|
|
textline " "
|
|
bitfld.long 0x00 9. " RDFC ,Enable read mode flow control" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " WTFC ,Enable write mode flow control" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--5. " STARTRD ,Preread timing" "0 cycles,1 cycle,2 cycles,3 cycles"
|
|
bitfld.long 0x00 3. " FULLDUP ,Full duplex mode" "Half duplex,Full duplex"
|
|
textline " "
|
|
endif
|
|
bitfld.long 0x00 2. " SPHA ,Select SPI phase" "Leading,Trailing"
|
|
bitfld.long 0x00 1. " SPOL ,Select SPI polarity" "0,1"
|
|
bitfld.long 0x00 0. " IFCSEL ,Select I/O interface" "I2C,SPI"
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,IO Master Interrupts Enable Register"
|
|
bitfld.long 0x00 10. " ARB ,Arbitration loss interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " STOP ,STOP command interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " START ,START command interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ICMD ,Illegal command interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " IACC ,Illegal FIFO access interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " WTLEN ,Write length mismatch interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " NAK ,I2C NAK interrupt" "Disabled,Enabled"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 3. " FOVFL ,Write FIFO overflow interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " FUNDFL ,Read FIFO underflow interrupt" "Disabled,Enabled"
|
|
else
|
|
bitfld.long 0x00 3. " FOVFL ,Read FIFO overflow interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " FUNDFL ,Write FIFO underflow interrupt" "Disabled,Enabled"
|
|
endif
|
|
textline " "
|
|
bitfld.long 0x00 1. " THR ,FIFO threshold interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CMDCMP ,Command complete interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,IO Master Interrupts Status Register"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x04 10. " ARB ,Arbitration loss interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 9. 0x08 9. 0x04 9. " STOP ,STOP command interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x04 8. " START ,START command interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " ICMD ,Illegal command interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " IACC ,Illegal FIFO access interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " WTLEN ,Write length mismatch interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " NAK ,I2C NAK interrupt" "No interrupt,Interrupt"
|
|
sif (cpu()=="AMAPH1KK")
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " FOVFL ,Write FIFO overflow interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " FUNDFL ,Read FIFO underflow interrupt" "No interrupt,Interrupt"
|
|
else
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " FOVFL ,Read FIFO overflow interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " FUNDFL ,Write FIFO underflow interrupt" "No interrupt,Interrupt"
|
|
endif
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " THR ,FIFO threshold interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CMDCMP ,Command complete interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "I2C Slave (I2C/SPI Slave)"
|
|
base ad:0x50000000
|
|
width 15.
|
|
group.long 0x100++0x13
|
|
line.long 0x00 "FIFOPTR,Current FIFO Pointer"
|
|
hexmask.long.byte 0x00 8.--15. 1. " FIFOSIZ ,The number of bytes currently in the hardware FIFO"
|
|
hexmask.long.byte 0x00 0.--7. 1. " FIFOPTR ,Current FIFO pointer"
|
|
line.long 0x04 "FIFOCFG,FIFO Configuration"
|
|
bitfld.long 0x04 24.--29. " ROBASE ,Defines the read-only area" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x04 8.--13. " FIFOMAX ,Maximum FIFO address in 8 byte segments" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x04 0.--4. " FIFOBASE ,Base address of the I/O FIFO in 8 byte segments" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
line.long 0x08 "FIFOTHR,FIFO Threshold Configuration"
|
|
hexmask.long.byte 0x08 0.--7. 1. " FIFOTHR ,FIFO size interrupt threshold"
|
|
line.long 0x0C "FUPD,FIFO Update Status"
|
|
rbitfld.long 0x0C 1. " IOREAD ,IO read is active" "Inactive,Active"
|
|
bitfld.long 0x0C 0. " FIFOUPD ,FIFO update is underway" "No update,Update"
|
|
line.long 0x10 "FIFOCTR,Overall FIFO Counter"
|
|
hexmask.long.word 0x10 0.--9. 1. " FIFOCTR ,Virtual FIFO byte count"
|
|
wgroup.long 0x114++0x03
|
|
line.long 0x00 "FIFOINC,Overall FIFO Counter Increment"
|
|
hexmask.long.word 0x00 0.--9. 1. " FIFOINC ,Increment the Overall FIFO Counter by this value on a write"
|
|
group.long 0x118++0x03
|
|
line.long 0x00 "CFG,I/O Slave Configuration"
|
|
bitfld.long 0x00 31. " IFCEN ,IOSLAVE interface enable" "Disabled,Enabled"
|
|
hexmask.long.word 0x00 8.--19. 1. " I2CADDR ,7-bit or 10-bit I2C device address"
|
|
bitfld.long 0x00 4. " STARTRD ,Cycle to initiate an I/O RAM read" "Late,Early"
|
|
bitfld.long 0x00 2. " LSB ,Transfer bit ordering" "MSB,LSB"
|
|
textline " "
|
|
bitfld.long 0x00 1. " SPOL ,SPI polarity" "Polarity 0,Polarity 1"
|
|
bitfld.long 0x00 0. " IFCSEL ,I/O interface" "I2C,SPI"
|
|
rgroup.long 0x11C++0x03
|
|
line.long 0x00 "PRENC,I/O Slave Interrupt Priority Encode"
|
|
bitfld.long 0x00 0.--4. " PRENC ,Priority encode of the REGACC interrupts" "Lowest,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,Highest"
|
|
group.long 0x120++0x03
|
|
line.long 0x00 "IOINTCTL,I/O Interrupt Control"
|
|
bitfld.long 0x00 31. " IOINTSET[7] ,Set the IOINT interrupt 7" "No effect,Set"
|
|
bitfld.long 0x00 29. " [6] ,Set the IOINT interrupt 6" "No effect,Set"
|
|
bitfld.long 0x00 28. " [5] ,Set the IOINT interrupt 5" "No effect,Set"
|
|
bitfld.long 0x00 27. " [4] ,Set the IOINT interrupt 4" "No effect,Set"
|
|
textline " "
|
|
bitfld.long 0x00 26. " [3] ,Set the IOINT interrupt 3" "No effect,Set"
|
|
bitfld.long 0x00 25. " [2] ,Set the IOINT interrupt 2" "No effect,Set"
|
|
bitfld.long 0x00 24. " [1] ,Set the IOINT interrupt 1" "No effect,Set"
|
|
bitfld.long 0x00 23. " [0] ,Set the IOINT interrupt 0" "No effect,Set"
|
|
textline " "
|
|
bitfld.long 0x00 16. " IOINTCLR ,Clears all of the IOINT interrupts" "No effect,Clear"
|
|
textline " "
|
|
rbitfld.long 0x00 15. " IOINT[7] ,IOINT interrupt 7 status" "No interrupt,Interrupt"
|
|
rbitfld.long 0x00 14. " [6] ,IOINT interrupt 6 status" "No interrupt,Interrupt"
|
|
rbitfld.long 0x00 13. " [5] ,Read the IOINT interrupt 5 status" "No interrupt,Interrupt"
|
|
rbitfld.long 0x00 12. " [4] ,Read the IOINT interrupt 4 status" "No interrupt,Interrupt"
|
|
textline " "
|
|
rbitfld.long 0x00 11. " [3] ,Read the IOINT interrupt 3 status" "No interrupt,Interrupt"
|
|
rbitfld.long 0x00 10. " [2] ,Read the IOINT interrupt 2 status" "No interrupt,Interrupt"
|
|
rbitfld.long 0x00 9. " [1] ,Read the IOINT interrupt 1 status" "No interrupt,Interrupt"
|
|
rbitfld.long 0x00 8. " [0] ,Read the IOINT interrupt 0 status" "No interrupt,Interrupt"
|
|
textline " "
|
|
rbitfld.long 0x00 7. " IOINTEN[7] ,IOINT interrupt 7 enable" "Disabled,Enabled"
|
|
rbitfld.long 0x00 6. " [6] ,IOINT interrupt 6 enable" "Disabled,Enabled"
|
|
rbitfld.long 0x00 5. " [5] ,Read the IOINT interrupt 5 enable" "Disabled,Enabled"
|
|
rbitfld.long 0x00 4. " [4] ,Read the IOINT interrupt 4 enable" "Disabled,Enabled"
|
|
textline " "
|
|
rbitfld.long 0x00 3. " [3] ,Read the IOINT interrupt 3 enable" "Disabled,Enabled"
|
|
rbitfld.long 0x00 2. " [2] ,Read the IOINT interrupt 2 enable" "Disabled,Enabled"
|
|
rbitfld.long 0x00 1. " [1] ,Read the IOINT interrupt 1 enable" "Disabled,Enabled"
|
|
rbitfld.long 0x00 0. " [0] ,Read the IOINT interrupt 0 enable" "Disabled,Enabled"
|
|
rgroup.long 0x124++0x03
|
|
line.long 0x00 "GENADD,General Address Data"
|
|
hexmask.long.byte 0x00 0.--7. 1. " GADATA ,The data supplied on the last General Address reference"
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,IO Slave Interrupts: Enable"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 9. " XCMPWR ,Transfer complete interrupt - write to register space" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " XCMPWF ,Transfer complete interrupt - write to FIFO space" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " XCMPRR ,Transfer complete interrupt - read from register space" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " XCMPRF ,Transfer complete interrupt - read from FIFO space" "Disabled,Enabled"
|
|
textline " "
|
|
endif
|
|
bitfld.long 0x00 5. " IOINTW ,I2C Interrupt Write interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " GENAD ,I2C General Address interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " FRDERR ,FIFO Read Error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " FUNDFL ,FIFO Underflow interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " FOVFL ,FIFO Overflow interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " FSIZE ,FIFO Size interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,IO Slave Interrupts: Status"
|
|
sif (cpu()=="AMAPH1KK")
|
|
setclrfld.long 0x00 9. 0x08 9. 0x04 9. " XCMPWR ,Transfer complete interrupt - write to register space" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x04 8. " XCMPWF ,Transfer complete interrupt - write to FIFO space" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " XCMPRR ,Transfer complete interrupt - read from register space" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " XCMPRF ,Transfer complete interrupt - read from FIFO space" "No interrupt,Interrupt"
|
|
textline " "
|
|
endif
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " IOINTW ,I2C Interrupt Write interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " GENAD ,I2C General Address interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " FRDERR ,FIFO Read Error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " FUNDFL ,FIFO Underflow interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " FOVFL ,FIFO Overflow interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " FSIZE ,FIFO Size interrupt" "No interrupt,Interrupt"
|
|
group.long 0x210++0x03
|
|
line.long 0x00 "REGACCINTEN,Register Access Interrupts: Enable"
|
|
bitfld.long 0x00 31. " REGACC[31] ,Register access interrupt 31" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " [30] ,Register access interrupt 30" "Disabled,Enabled"
|
|
bitfld.long 0x00 29. " [29] ,Register access interrupt 29" "Disabled,Enabled"
|
|
bitfld.long 0x00 28. " [28] ,Register access interrupt 28" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 27. " [27] ,Register access interrupt 27" "Disabled,Enabled"
|
|
bitfld.long 0x00 26. " [26] ,Register access interrupt 26" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " [25] ,Register access interrupt 25" "Disabled,Enabled"
|
|
bitfld.long 0x00 24. " [24] ,Register access interrupt 24" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 23. " [23] ,Register access interrupt 23" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " [22] ,Register access interrupt 22" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " [21] ,Register access interrupt 21" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " [20] ,Register access interrupt 20" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19. " [19] ,Register access interrupt 19" "Disabled,Enabled"
|
|
bitfld.long 0x00 18. " [18] ,Register access interrupt 18" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " [17] ,Register access interrupt 17" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " [16] ,Register access interrupt 16" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " [15] ,Register access interrupt 15" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " [14] ,Register access interrupt 14" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " [13] ,Register access interrupt 13" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " [12] ,Register access interrupt 12" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11. " [11] ,Register access interrupt 11" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " [10] ,Register access interrupt 10" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " [9] ,Register access interrupt 9" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " [8] ,Register access interrupt 8" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " [7] ,Register access interrupt 7" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " [6] ,Register access interrupt 6" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " [5] ,Register access interrupt 5" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " [4] ,Register access interrupt 4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " [3] ,Register access interrupt 3" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " [2] ,Register access interrupt 2" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " [1] ,Register access interrupt 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " [0] ,Register access interrupt 0" "Disabled,Enabled"
|
|
group.long 0x214++0x03
|
|
line.long 0x00 "REGACCINTSTAT,Register Access Interrupts: Status"
|
|
setclrfld.long 0x00 31. 0x08 31. 0x04 31. " REGACC[31] ,Register access interrupt 31" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x08 30. 0x04 30. " [30] ,Register access interrupt 30" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x08 29. 0x04 29. " [29] ,Register access interrupt 29" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x08 28. 0x04 28. " [28] ,Register access interrupt 28" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 27. 0x08 27. 0x04 27. " [27] ,Register access interrupt 27" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x08 26. 0x04 26. " [26] ,Register access interrupt 26" "Disabled,Enabled"
|
|
setclrfld.long 0x00 25. 0x08 25. 0x04 25. " [25] ,Register access interrupt 25" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x08 24. 0x04 24. " [24] ,Register access interrupt 24" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 23. 0x08 23. 0x04 23. " [23] ,Register access interrupt 23" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x08 22. 0x04 22. " [22] ,Register access interrupt 22" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x08 21. 0x04 21. " [21] ,Register access interrupt 21" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x08 20. 0x04 20. " [20] ,Register access interrupt 20" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x08 19. 0x04 19. " [19] ,Register access interrupt 19" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x08 18. 0x04 18. " [18] ,Register access interrupt 18" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x08 17. 0x04 17. " [17] ,Register access interrupt 17" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x08 16. 0x04 16. " [16] ,Register access interrupt 16" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 15. 0x08 15. 0x04 15. " [15] ,Register access interrupt 15" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x08 14. 0x04 14. " [14] ,Register access interrupt 14" "Disabled,Enabled"
|
|
setclrfld.long 0x00 13. 0x08 13. 0x04 13. " [13] ,Register access interrupt 13" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x08 12. 0x04 12. " [12] ,Register access interrupt 12" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 11. 0x08 11. 0x04 11. " [11] ,Register access interrupt 11" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x04 10. " [10] ,Register access interrupt 10" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x08 9. 0x04 9. " [9] ,Register access interrupt 9" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x04 8. " [8] ,Register access interrupt 8" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " [7] ,Register access interrupt 7" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " [6] ,Register access interrupt 6" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " [5] ,Register access interrupt 5" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " [4] ,Register access interrupt 4" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " [3] ,Register access interrupt 3" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " [2] ,Register access interrupt 2" "Disabled,Enabled"
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " [1] ,Register access interrupt 1" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " [0] ,Register access interrupt 0" "Disabled,Enabled"
|
|
sif (cpu()=="AMAPH1KK")
|
|
tree "Host Registers"
|
|
base ad:((per.l((ad:0x00+0x04))&0x1F)*8)
|
|
width 11.
|
|
group.byte 0x78++0x00
|
|
line.byte 0x00 "HOST_IER,Host Interrupt Enable Register"
|
|
bitfld.byte 0x00 7. " FUNDFLEN ,FIFO underflow interrupt enable" "Disabled,Enabled"
|
|
bitfld.byte 0x00 6. " RDERREN ,FIFO read access locked interrupt enable" "Disabled,Enabled"
|
|
bitfld.byte 0x00 5. " SWINT5EN ,Software interrupt 5 enable" "Disabled,Enabled"
|
|
bitfld.byte 0x00 4. " SWINT5EN ,Software interrupt 4 enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.byte 0x00 3. " SWINT5EN ,Software interrupt 3 enable" "Disabled,Enabled"
|
|
bitfld.byte 0x00 2. " SWINT5EN ,Software interrupt 2 enable" "Disabled,Enabled"
|
|
bitfld.byte 0x00 1. " SWINT5EN ,Software interrupt 1 enable" "Disabled,Enabled"
|
|
bitfld.byte 0x00 0. " SWINT5EN ,Software interrupt 0 enable" "Disabled,Enabled"
|
|
group.byte 0x79++0x00
|
|
line.byte 0x00 "HOST_ISR,Host Interrupt Status Register"
|
|
setclrfld.byte 0x00 7. 0x02 7. 0x01 7. " FUNDFLSTAT ,FIFO underflow interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.byte 0x00 6. 0x02 6. 0x01 6. " RDERRSTAT ,FIFO read access locked interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.byte 0x00 5. 0x02 5. 0x01 5. " SWINT5STAT ,Software interrupt 5 status" "No interrupt,Interrupt"
|
|
setclrfld.byte 0x00 4. 0x02 4. 0x01 4. " SWINT5STAT ,Software interrupt 4 status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.byte 0x00 3. 0x02 3. 0x01 3. " SWINT5STAT ,Software interrupt 3 status" "No interrupt,Interrupt"
|
|
setclrfld.byte 0x00 2. 0x02 2. 0x01 2. " SWINT5STAT ,Software interrupt 2 status" "No interrupt,Interrupt"
|
|
setclrfld.byte 0x00 1. 0x02 1. 0x01 1. " SWINT5STAT ,Software interrupt 1 status" "No interrupt,Interrupt"
|
|
setclrfld.byte 0x00 0. 0x02 0. 0x01 0. " SWINT5STAT ,Software interrupt 0 status" "No interrupt,Interrupt"
|
|
rgroup.byte 0x7C++0x01
|
|
line.byte 0x00 "FIFOCTRLO,FIFOCTR Low Byte"
|
|
line.byte 0x01 "FIFOCTRUP,FIFOCTR Upper Byte"
|
|
bitfld.byte 0x01 0.--1. " FIFOCTRUP ,Upper two bits of FIFOCTR" "0,1,2,3"
|
|
hgroup.byte 0x7F++0x00
|
|
hide.byte 0x00 "FIFO,FIFO Read Data"
|
|
in
|
|
tree.end
|
|
endif
|
|
width 0xB
|
|
tree.end
|
|
tree "GPIO (General Purpose IO)"
|
|
base ad:0x40010000
|
|
width 10.
|
|
if (((per.l(ad:0x40010000+0x60))&0xFFFFFFFF)==0x00000073)
|
|
group.long 0x00++0x33
|
|
line.long 0x00 "PADREGA,Pad Configuration Register A"
|
|
bitfld.long 0x00 31. " PAD3PWRUP ,Pad 3 upper power switch enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 27.--29. " PAD3FNCSEL ,Pad 3 function select" "TRIG0,SLnCE,M1nCE4,GPIO3,M0nCE,M1nCE,Disabled,?..."
|
|
bitfld.long 0x00 26. " PAD3STRNG ,Pad 3 drive strength" "Low,High"
|
|
bitfld.long 0x00 25. " PAD3INPEN ,Pad 3 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 24. " PAD3PULL ,Pad 3 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19.--21. " PAD2FNCSEL ,Pad 2 function select" "SLWIR3,SLMOSI,CLKOUT,GPIO2,M0MOSI,M1MOSI,M0WIR3,M1WIR3"
|
|
bitfld.long 0x00 18. " PAD2STRNG ,Pad 2 drive strength" "Low,High"
|
|
bitfld.long 0x00 17. " PAD2INPEN ,Pad 2 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " PAD2PULL ,Pad 2 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11.--13. " PAD1FNCSEL ,Pad 1 function select" "SLSDA,SLMISO,UARTRX,GPIO1,M0MISO,M1MISO,M0SDA,M1SDA"
|
|
bitfld.long 0x00 10. " PAD1STRNG ,Pad 1 drive strength" "Low,High"
|
|
bitfld.long 0x00 9. " PAD1INPEN ,Pad 1 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " PAD1PULL ,Pad 1 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3.--5. " PAD0FNCSEL ,Pad 0 function select" "SLSCL,SLSCK,UARTTX,GPIO0,M0SCK,M1SCK,M0SCL,M1SCL"
|
|
bitfld.long 0x00 2. " PAD0STRNG ,Pad 0 drive strength" "Low,High"
|
|
bitfld.long 0x00 1. " PAD0INPEN ,Pad 0 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PAD0PULL ,Pad 0 pullup enable" "Disabled,Enabled"
|
|
line.long 0x04 "PADREGB,Pad Configuration Register B"
|
|
bitfld.long 0x04 27.--29. " PAD7FNCSEL ,Pad 7 function select" "M0WIR3,M0MOSI,CLKOUT,GPIO7,,,SLWIR3,Disabled"
|
|
bitfld.long 0x04 26. " PAD7STRNG ,Pad 7 drive strength" "Low,High"
|
|
bitfld.long 0x04 25. " PAD7INPEN ,Pad 7 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 24. " PAD7PULL ,Pad 7 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 22.--23. " PAD6RSEL ,Pad 6 pullup resistor selection" "1.5 KOhms,6 KOhms,12 KOhms,24 KOhms"
|
|
bitfld.long 0x04 19.--21. " PAD6FNCSEL ,Pad 6 function select" "M0SDA,M0MISO,UACTS,GPIO6,SLMISO,,SLSDA,Disabled"
|
|
bitfld.long 0x04 18. " PAD6STRNG ,Pad 6 drive strength" "Low,High"
|
|
bitfld.long 0x04 17. " PAD6INPEN ,Pad 6 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 16. " PAD6PULL ,Pad 6 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 14.--15. " PAD5RSEL ,Pad 5 pullup resistor selection" "1.5 KOhms,6 KOhms,12 KOhms,24 KOhms"
|
|
bitfld.long 0x04 11.--13. " PAD5FNCSEL ,Pad 5 function select" "M0SCL,M0SCK,UARTS,GPIO5,SLSCK,,SLSCL,Disabled"
|
|
bitfld.long 0x04 10. " PAD5STRNG ,Pad 5 drive strength" "Low,High"
|
|
bitfld.long 0x04 9. " PAD5INPEN ,Pad 5 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 8. " PAD5PULL ,Pad 5 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 7. " PAD4PWRUP ,Pad 4 upper power switch enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 3.--5. " PAD4FNCSEL ,Pad 4 function select" "TRIG1,SLINT,M0nCE5,GPIO4,SLINTGP,SWO,CLKOUT,Disabled"
|
|
bitfld.long 0x04 2. " PAD4STRNG ,Pad 4 drive strength" "Low,High"
|
|
bitfld.long 0x04 1. " PAD4INPEN ,Pad 4 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 0. " PAD4PULL ,Pad 4 pullup enable" "Disabled,Enabled"
|
|
line.long 0x08 "PADREGC,Pad Configuration Register C"
|
|
bitfld.long 0x08 30. " PAD11PWRDN ,Pad 11 lower power switch enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 27.--28. " PAD11FNCSEL ,Pad 11 function select" "ANATST,M0nCE0,CLKOUT,GPIO11"
|
|
bitfld.long 0x08 26. " PAD11STRNG ,Pad 11 drive strength" "Low,High"
|
|
bitfld.long 0x08 25. " PAD11INPEN ,Pad 11 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 24. " PAD11PULL ,Pad 11 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 19.--21. " PAD10FNCSEL ,Pad 10 function select" "M1WIR3,M1MOSI,M0nCE6,GPIO10,,EXTHFA,Disabled,SLWIR3"
|
|
bitfld.long 0x08 18. " PAD10STRNG ,Pad 10 drive strength" "Low,High"
|
|
bitfld.long 0x08 17. " PAD10INPEN ,Pad 10 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 16. " PAD10PULL ,Pad 10 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 14.--15. " PAD9RSEL ,Pad 9 pullup resistor selection" "1.5 KOhms,6 KOhms,12 KOhms,24 KOhms"
|
|
bitfld.long 0x08 11.--13. " PAD9FNCSEL ,Pad 9 function select" "M1SDA,M1MISO,M0nCE5,GPIO9,,SLMISO,Disabled,SLSDA"
|
|
bitfld.long 0x08 10. " PAD9STRNG ,Pad 9 drive strength" "Low,High"
|
|
bitfld.long 0x08 9. " PAD9INPEN ,Pad 9 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 8. " PAD9PULL ,Pad 9 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 6.--7. " PAD8RSEL ,Pad 8 pullup resistor selection" "1.5 KOhms,6 KOhms,12 KOhms,24 KOhms"
|
|
bitfld.long 0x08 3.--5. " PAD8FNCSEL ,Pad 8 function select" "M1SCL,M1SCK,M0nCE4,GPIO8,,SLSCK,Disabled,SLSCL"
|
|
bitfld.long 0x08 2. " PAD8STRNG ,Pad 8 drive strength" "Low,High"
|
|
bitfld.long 0x08 1. " PAD8INPEN ,Pad 8 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 0. " PAD8PULL ,Pad 8 pullup enable" "Disabled,Enabled"
|
|
line.long 0x0C "PADREGD,Pad Configuration Register D"
|
|
bitfld.long 0x0C 27.--29. " PAD15FNCSEL ,Pad 15 function select" "ADC3,M1nCE3,UARTRX,GPIO15,,EXTXT,,Disabled"
|
|
bitfld.long 0x0C 26. " PAD15STRNG ,Pad 15 drive strength" "Low,High"
|
|
bitfld.long 0x0C 25. " PAD15INPEN ,Pad 15 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 24. " PAD15PULL ,Pad 15 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 19.--21. " PAD14FNCSEL ,Pad 14 function select" "ADC2,M1nCE2,UARTTX,GPIO14,,EXTHFS,,Disabled"
|
|
bitfld.long 0x0C 18. " PAD14STRNG ,Pad 14 drive strength" "Low,High"
|
|
bitfld.long 0x0C 17. " PAD14INPEN ,Pad 14 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 16. " PAD14PULL ,Pad 14 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 11.--13. " PAD13FNCSEL ,Pad 13 function select" "ADC1,M1nCE1,TCTB0,GPIO13,,EXTHFA,SWO,Disabled"
|
|
bitfld.long 0x0C 10. " PAD13STRNG ,Pad 13 drive strength" "Low,High"
|
|
bitfld.long 0x0C 9. " PAD13INPEN ,Pad 13 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 8. " PAD13PULL ,Pad 13 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 3.--4. " PAD12FNCSEL ,Pad 12 function select" "ADC0,M1nCE0,TCTA0,GPIO12"
|
|
bitfld.long 0x0C 2. " PAD12STRNG ,Pad 12 drive strength" "Low,High"
|
|
bitfld.long 0x0C 1. " PAD12INPEN ,Pad 12 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " PAD12PULL ,Pad 12 pullup enable" "Disabled,Enabled"
|
|
line.long 0x10 "PADREGE,Pad Configuration Register E"
|
|
bitfld.long 0x10 27.--28. " PAD19FNCSEL ,Pad 19 function select" "CMPRF,M0nCE3,TCTB1,GPIO19"
|
|
bitfld.long 0x10 26. " PAD19STRNG ,Pad 19 drive strength" "Low,High"
|
|
bitfld.long 0x10 25. " PAD19INPEN ,Pad 19 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 24. " PAD19PULL ,Pad 19 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 19.--20. " PAD18FNCSEL ,Pad 18 function select" "CMPIN1,M0nCE2,TCTA1,GPIO18"
|
|
bitfld.long 0x10 18. " PAD18STRNG ,Pad 18 drive strength" "Low,High"
|
|
bitfld.long 0x10 17. " PAD18INPEN ,Pad 18 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 16. " PAD18PULL ,Pad 18 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 11.--13. " PAD17FNCSEL ,Pad 17 function select" "CMPIN0,M0nCE1,TRIG3,GPIO17,,EXTLF,,Disabled"
|
|
bitfld.long 0x10 10. " PAD17STRNG ,Pad 17 drive strength" "Low,High"
|
|
bitfld.long 0x10 9. " PAD17INPEN ,Pad 17 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 8. " PAD17PULL ,Pad 17 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 3.--4. " PAD16FNCSEL ,Pad 16 function select" "ADCREF,M0nCE4,TRIG2,GPIO16"
|
|
bitfld.long 0x10 2. " PAD16STRNG ,Pad 16 drive strength" "Low,High"
|
|
bitfld.long 0x10 1. " PAD16INPEN ,Pad 16 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 0. " PAD16PULL ,Pad 16 pullup enable" "Disabled,Enabled"
|
|
line.long 0x14 "PADREGF,Pad Configuration Register F"
|
|
bitfld.long 0x14 27.--28. " PAD23FNCSEL ,Pad 23 function select" "UARTRX,M0nCE0,TCTB3,GPIO23"
|
|
bitfld.long 0x14 26. " PAD23STRNG ,Pad 23 drive strength" "Low,High"
|
|
bitfld.long 0x14 25. " PAD23INPEN ,Pad 23 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x14 24. " PAD23PULL ,Pad 23 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x14 19.--20. " PAD22FNCSEL ,Pad 22 function select" "UARTTX,M1nCE7,TCTA3,GPIO22"
|
|
bitfld.long 0x14 18. " PAD22STRNG ,Pad 22 drive strength" "Low,High"
|
|
bitfld.long 0x14 17. " PAD22INPEN ,Pad 22 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x14 16. " PAD22PULL ,Pad 22 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x14 11.--12. " PAD21FNCSEL ,Pad 21 function select" "SWDIO,M1nCE6,TCTB2,GPIO21"
|
|
bitfld.long 0x14 10. " PAD21STRNG ,Pad 21 drive strength" "Low,High"
|
|
bitfld.long 0x14 9. " PAD21INPEN ,Pad 21 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x14 8. " PAD21PULL ,Pad 21 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x14 3.--4. " PAD20FNCSEL ,Pad 20 function select" "SWDCK,M1nCE5,TCTA2,GPIO20"
|
|
bitfld.long 0x14 2. " PAD20STRNG ,Pad 20 drive strength" "Low,High"
|
|
bitfld.long 0x14 1. " PAD20INPEN ,Pad 20 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x14 0. " PAD20PULL ,Pad 20 pulldown enable" "Disabled,Enabled"
|
|
line.long 0x18 "PADREGG,Pad Configuration Register G"
|
|
bitfld.long 0x18 27.--28. " PAD27FNCSEL ,Pad 27 function select" "EXTHF,M1nCE4,TCTA1,GPIO27"
|
|
bitfld.long 0x18 26. " PAD27STRNG ,Pad 27 drive strength" "Low,High"
|
|
bitfld.long 0x18 25. " PAD27INPEN ,Pad 27 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 24. " PAD27PULL ,Pad 27 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 19.--20. " PAD26FNCSEL ,Pad 26 function select" "EXTLF,M0nCE3,TCTB0,GPIO26"
|
|
bitfld.long 0x18 18. " PAD26STRNG ,Pad 26 drive strength" "Low,High"
|
|
bitfld.long 0x18 17. " PAD26INPEN ,Pad 26 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 16. " PAD26PULL ,Pad 26 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 11.--12. " PAD25FNCSEL ,Pad 25 function select" "EXTXT,M0nCE2,TCTA0,GPIO25"
|
|
bitfld.long 0x18 10. " PAD25STRNG ,Pad 25 drive strength" "Low,High"
|
|
bitfld.long 0x18 9. " PAD25INPEN ,Pad 25 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 8. " PAD25PULL ,Pad 25 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 3.--4. " PAD24FNCSEL ,Pad 24 function select" "Disabled,M0nCE1,CLKOUT,GPIO24"
|
|
bitfld.long 0x18 2. " PAD24STRNG ,Pad 24 drive strength" "Low,High"
|
|
bitfld.long 0x18 1. " PAD24INPEN ,Pad 24 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 0. " PAD24PULL ,Pad 24 pullup enable" "Disabled,Enabled"
|
|
line.long 0x1C "PADREGH,Pad Configuration Register H"
|
|
bitfld.long 0x1C 27.--28. " PAD31FNCSEL ,Pad 31 function select" "ADC6,M0nCE4,TCTA3,GPIO31"
|
|
bitfld.long 0x1C 26. " PAD31STRNG ,Pad 31 drive strength" "Low,High"
|
|
bitfld.long 0x1C 25. " PAD31INPEN ,Pad 31 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x1C 24. " PAD31PULL ,Pad 31 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 19.--20. " PAD30FNCSEL ,Pad 30 function select" "ADC5,M1nCE7,TCTB2,GPIO30"
|
|
bitfld.long 0x1C 18. " PAD30STRNG ,Pad 30 drive strength" "Low,High"
|
|
bitfld.long 0x1C 17. " PAD30INPEN ,Pad 30 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x1C 16. " PAD30PULL ,Pad 30 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 11.--12. " PAD29FNCSEL ,Pad 29 function select" "ADC4,M1nCE6,TCTA2,GPIO29"
|
|
bitfld.long 0x1C 10. " PAD29STRNG ,Pad 29 drive strength" "Low,High"
|
|
bitfld.long 0x1C 9. " PAD29INPEN ,Pad 29 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x1C 8. " PAD29PULL ,Pad 29 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 3.--4. " PAD28FNCSEL ,Pad 28 function select" "Disabled,M1nCE5,TCTB1,GPIO28"
|
|
bitfld.long 0x1C 2. " PAD28STRNG ,Pad 28 drive strength" "Low,High"
|
|
bitfld.long 0x1C 1. " PAD28INPEN ,Pad 28 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x1C 0. " PAD28PULL ,Pad 28 pullup enable" "Disabled,Enabled"
|
|
line.long 0x20 "PADREGI,Pad Configuration Register I"
|
|
bitfld.long 0x20 27.--28. " PAD35FNCSEL ,Pad 35 function select" "Disabled,M1nCE0,UARTTX,GPIO35"
|
|
bitfld.long 0x20 26. " PAD35STRNG ,Pad 35 drive strength" "Low,High"
|
|
bitfld.long 0x20 25. " PAD35INPEN ,Pad 35 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 24. " PAD35PULL ,Pad 35 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 19.--20. " PAD34FNCSEL ,Pad 34 function select" "CMPRF2,M0nCE7,Disabled,GPIO34"
|
|
bitfld.long 0x20 18. " PAD34STRNG ,Pad 34 drive strength" "Low,High"
|
|
bitfld.long 0x20 17. " PAD34INPEN ,Pad 34 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 16. " PAD34PULL ,Pad 34 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 11.--12. " PAD33FNCSEL ,Pad 33 function select" "CMPRF1,M0nCE6,Disabled,GPIO33"
|
|
bitfld.long 0x20 10. " PAD33STRNG ,Pad 33 drive strength" "Low,High"
|
|
bitfld.long 0x20 9. " PAD33INPEN ,Pad 33 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 8. " PAD33PULL ,Pad 33 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 3.--4. " PAD32FNCSEL ,Pad 32 function select" "ADC7,M0nCE5,TCTB3,GPIO32"
|
|
bitfld.long 0x20 2. " PAD32STRNG ,Pad 32 drive strength" "Low,High"
|
|
bitfld.long 0x20 1. " PAD32INPEN ,Pad 32 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 0. " PAD32PULL ,Pad 32 pullup enable" "Disabled,Enabled"
|
|
line.long 0x24 "PADREGJ,Pad Configuration Register J"
|
|
bitfld.long 0x24 27.--28. " PAD39FNCSEL ,Pad 39 function select" "TRIG2,UARTTX,CLKOUT,GPIO39"
|
|
bitfld.long 0x24 26. " PAD39STRNG ,Pad 39 drive strength" "Low,High"
|
|
bitfld.long 0x24 25. " PAD39INPEN ,Pad 39 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 24. " PAD39PULL ,Pad 39 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x24 19.--20. " PAD38FNCSEL ,Pad 38 function select" "TRIG1,M1nCE3,UACTS,GPIO38"
|
|
bitfld.long 0x24 18. " PAD38STRNG ,Pad 38 drive strength" "Low,High"
|
|
bitfld.long 0x24 17. " PAD38INPEN ,Pad 38 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 16. " PAD38PULL ,Pad 38 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x24 11.--12. " PAD37FNCSEL ,Pad 37 function select" "TRIG0,M1nCE2,UARTS,GPIO37"
|
|
bitfld.long 0x24 10. " PAD37STRNG ,Pad 37 drive strength" "Low,High"
|
|
bitfld.long 0x24 9. " PAD37INPEN ,Pad 37 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 8. " PAD37PULL ,Pad 37 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x24 3.--4. " PAD36FNCSEL ,Pad 36 function select" "Disabled,M1nCE1,UARTRX,GPIO36"
|
|
bitfld.long 0x24 2. " PAD36STRNG ,Pad 36 drive strength" "Low,High"
|
|
bitfld.long 0x24 1. " PAD36INPEN ,Pad 36 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 0. " PAD36PULL ,Pad 36 pullup enable" "Disabled,Enabled"
|
|
line.long 0x28 "PADREGK,Pad Configuration Register K"
|
|
bitfld.long 0x28 27.--28. " PAD43FNCSEL ,Pad 43 function select" "TRIG6,M0nCE1,TCTB0,GPIO43"
|
|
bitfld.long 0x28 26. " PAD43STRNG ,Pad 43 drive strength" "Low,High"
|
|
bitfld.long 0x28 25. " PAD43INPEN ,Pad 43 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x28 24. " PAD43PULL ,Pad 43 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x28 19.--20. " PAD42FNCSEL ,Pad 42 function select" "TRIG5,M0nCE0,TCTA0,GPIO42"
|
|
bitfld.long 0x28 18. " PAD42STRNG ,Pad 42 drive strength" "Low,High"
|
|
bitfld.long 0x28 17. " PAD42INPEN ,Pad 42 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x28 16. " PAD42PULL ,Pad 42 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x28 11.--12. " PAD41FNCSEL ,Pad 41 function select" "TRIG4,Disabled,SWO,GPIO41"
|
|
bitfld.long 0x28 10. " PAD41STRNG ,Pad 41 drive strength" "Low,High"
|
|
bitfld.long 0x28 9. " PAD41INPEN ,Pad 41 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x28 8. " PAD41PULL ,Pad 41 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x28 3.--4. " PAD40FNCSEL ,Pad 40 function select" "TRIG3,UARTRX,Disabled,GPIO40"
|
|
bitfld.long 0x28 2. " PAD40STRNG ,Pad 40 drive strength" "Low,High"
|
|
bitfld.long 0x28 1. " PAD40INPEN ,Pad 40 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x28 0. " PAD40PULL ,Pad 40 pullup enable" "Disabled,Enabled"
|
|
line.long 0x2C "PADREGL,Pad Configuration Register L"
|
|
bitfld.long 0x2C 27.--28. " PAD47FNCSEL ,Pad 47 function select" "Disabled,M0nCE5,TCTB2,GPIO47"
|
|
bitfld.long 0x2C 26. " PAD47STRNG ,Pad 47 drive strength" "Low,High"
|
|
bitfld.long 0x2C 25. " PAD47INPEN ,Pad 47 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x2C 24. " PAD47PULL ,Pad 47 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x2C 19.--20. " PAD46FNCSEL ,Pad 46 function select" "Disabled,M0nCE4,TCTA2,GPIO46"
|
|
bitfld.long 0x2C 18. " PAD46STRNG ,Pad 46 drive strength" "Low,High"
|
|
bitfld.long 0x2C 17. " PAD46INPEN ,Pad 46 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x2C 16. " PAD46PULL ,Pad 46 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x2C 11.--12. " PAD45FNCSEL ,Pad 45 function select" "Disabled,M0nCE3,TCTB1,GPIO45"
|
|
bitfld.long 0x2C 10. " PAD45STRNG ,Pad 45 drive strength" "Low,High"
|
|
bitfld.long 0x2C 9. " PAD45INPEN ,Pad 45 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x2C 8. " PAD45PULL ,Pad 45 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x2C 3.--4. " PAD44FNCSEL ,Pad 44 function select" "TRIG7,M0nCE2,TCTA1,GPIO44"
|
|
bitfld.long 0x2C 2. " PAD44STRNG ,Pad 44 drive strength" "Low,High"
|
|
bitfld.long 0x2C 1. " PAD44INPEN ,Pad 44 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x2C 0. " PAD44PULL ,Pad 44 pullup enable" "Disabled,Enabled"
|
|
line.long 0x30 "PADREGM,Pad Configuration Register M"
|
|
bitfld.long 0x30 11.--12. " PAD49FNCSEL ,Pad 49 function select" "Disabled,M0nCE7,TCTB3,GPIO49"
|
|
bitfld.long 0x30 10. " PAD49STRNG ,Pad 49 drive strength" "Low,High"
|
|
bitfld.long 0x30 9. " PAD49INPEN ,Pad 49 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x30 8. " PAD49PULL ,Pad 49 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x30 3.--4. " PAD48FNCSEL ,Pad 48 function select" "Disabled,M0nCE6,TCTA3,GPIO48"
|
|
bitfld.long 0x30 2. " PAD48STRNG ,Pad 48 drive strength" "Low,High"
|
|
bitfld.long 0x30 1. " PAD48INPEN ,Pad 48 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x30 0. " PAD48PULL ,Pad 48 pullup enable" "Disabled,Enabled"
|
|
group.long 0x40++0x1B
|
|
line.long 0x00 "CFGA,GPIO Configuration Register A"
|
|
bitfld.long 0x00 31. " GPIO7INTD ,GPIO7 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 29.--30. " GPIO7OUTCFG ,GPIO7 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 28. " GPIO7INCFG ,GPIO7 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 27. " GPIO6INTD ,GPIO6 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 25.--26. " GPIO6OUTCFG ,GPIO6 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 24. " GPIO6INCFG ,GPIO6 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 23. " GPIO5INTD ,GPIO5 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 21.--22. " GPIO5OUTCFG ,GPIO5 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 20. " GPIO5INCFG ,GPIO5 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 19. " GPIO4INTD ,GPIO4 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 17.--18. " GPIO4OUTCFG ,GPIO4 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 16. " GPIO4INCFG ,GPIO4 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 15. " GPIO3INTD ,GPIO3 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 13.--14. " GPIO3OUTCFG ,GPIO3 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 12. " GPIO3INCFG ,GPIO3 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 11. " GPIO2INTD ,GPIO2 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 9.--10. " GPIO2OUTCFG ,GPIO2 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 8. " GPIO2INCFG ,GPIO2 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 7. " GPIO1INTD ,GPIO1 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 5.--6. " GPIO1OUTCFG ,GPIO1 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 4. " GPIO1INCFG ,GPIO1 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 3. " GPIO0INTD ,GPIO0 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 1.--2. " GPIO0OUTCFG ,GPIO0 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 0. " GPIO0INCFG ,GPIO0 input enable" "Read data,Always 0"
|
|
line.long 0x04 "CFGB,GPIO Configuration Register B"
|
|
bitfld.long 0x04 31. " GPIO15INTD ,GPIO15 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 29.--30. " GPIO15OUTCFG ,GPIO15 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 28. " GPIO15INCFG ,GPIO15 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 27. " GPIO14INTD ,GPIO14 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 25.--26. " GPIO14OUTCFG ,GPIO14 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 24. " GPIO14INCFG ,GPIO14 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 23. " GPIO13INTD ,GPIO13 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 21.--22. " GPIO13OUTCFG ,GPIO13 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 20. " GPIO13INCFG ,GPIO13 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 19. " GPIO12INTD ,GPIO12 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 17.--18. " GPIO12OUTCFG ,GPIO12 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 16. " GPIO12INCFG ,GPIO12 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 15. " GPIO11INTD ,GPIO11 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 13.--14. " GPIO11OUTCFG ,GPIO11 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 12. " GPIO11INCFG ,GPIO11 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 11. " GPIO10INTD ,GPIO10 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 9.--10. " GPIO10OUTCFG ,GPIO10 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 8. " GPIO10INCFG ,GPIO10 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 7. " GPIO9INTD ,GPIO9 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 5.--6. " GPIO9OUTCFG ,GPIO9 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 4. " GPIO9INCFG ,GPIO9 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 3. " GPIO8INTD ,GPIO8 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 1.--2. " GPIO8OUTCFG ,GPIO8 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 0. " GPIO8INCFG ,GPIO8 input enable" "Read data,Always 0"
|
|
line.long 0x08 "CFGC,GPIO Configuration Register C"
|
|
bitfld.long 0x08 31. " GPIO23INTD ,GPIO23 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 29.--30. " GPIO23OUTCFG ,GPIO23 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 28. " GPIO23INCFG ,GPIO23 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 27. " GPIO22INTD ,GPIO22 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 25.--26. " GPIO22OUTCFG ,GPIO22 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 24. " GPIO22INCFG ,GPIO22 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 23. " GPIO21INTD ,GPIO21 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 21.--22. " GPIO21OUTCFG ,GPIO21 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 20. " GPIO21INCFG ,GPIO21 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 19. " GPIO20INTD ,GPIO20 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 17.--18. " GPIO20OUTCFG ,GPIO20 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 16. " GPIO20INCFG ,GPIO20 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 15. " GPIO19INTD ,GPIO19 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 13.--14. " GPIO19OUTCFG ,GPIO19 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 12. " GPIO19INCFG ,GPIO19 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 11. " GPIO18INTD ,GPIO18 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 9.--10. " GPIO18OUTCFG ,GPIO18 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 8. " GPIO18INCFG ,GPIO18 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 7. " GPIO17INTD ,GPIO17 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 5.--6. " GPIO17OUTCFG ,GPIO17 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 4. " GPIO17INCFG ,GPIO17 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 3. " GPIO16INTD ,GPIO16 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 1.--2. " GPIO16OUTCFG ,GPIO16 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 0. " GPIO16INCFG ,GPIO16 input enable" "Read data,Always 0"
|
|
line.long 0x0C "CFGD,GPIO Configuration Register D"
|
|
bitfld.long 0x0C 31. " GPIO31INTD ,GPIO31 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 29.--30. " GPIO31OUTCFG ,GPIO31 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 28. " GPIO31INCFG ,GPIO31 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 27. " GPIO30INTD ,GPIO30 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 25.--26. " GPIO30OUTCFG ,GPIO30 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 24. " GPIO30INCFG ,GPIO30 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 23. " GPIO29INTD ,GPIO29 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 21.--22. " GPIO29OUTCFG ,GPIO29 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 20. " GPIO29INCFG ,GPIO29 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 19. " GPIO28INTD ,GPIO28 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 17.--18. " GPIO28OUTCFG ,GPIO28 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 16. " GPIO28INCFG ,GPIO28 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 15. " GPIO27INTD ,GPIO27 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 13.--14. " GPIO27OUTCFG ,GPIO27 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 12. " GPIO27INCFG ,GPIO27 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 11. " GPIO26INTD ,GPIO26 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 9.--10. " GPIO26OUTCFG ,GPIO26 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 8. " GPIO26INCFG ,GPIO26 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 7. " GPIO25INTD ,GPIO25 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 5.--6. " GPIO25OUTCFG ,GPIO25 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 4. " GPIO25INCFG ,GPIO25 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 3. " GPIO24INTD ,GPIO24 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 1.--2. " GPIO24OUTCFG ,GPIO24 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 0. " GPIO24INCFG ,GPIO24 input enable" "Read data,Always 0"
|
|
line.long 0x10 "CFGE,GPIO Configuration Register E"
|
|
bitfld.long 0x10 31. " GPIO39INTD ,GPIO39 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 29.--30. " GPIO39OUTCFG ,GPIO39 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 28. " GPIO39INCFG ,GPIO39 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 27. " GPIO38INTD ,GPIO38 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 25.--26. " GPIO38OUTCFG ,GPIO38 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 24. " GPIO38INCFG ,GPIO38 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 23. " GPIO37INTD ,GPIO37 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 21.--22. " GPIO37OUTCFG ,GPIO37 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 20. " GPIO37INCFG ,GPIO37 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 19. " GPIO36INTD ,GPIO36 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 17.--18. " GPIO36OUTCFG ,GPIO36 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 16. " GPIO36INCFG ,GPIO36 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 15. " GPIO35INTD ,GPIO35 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 13.--14. " GPIO35OUTCFG ,GPIO35 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 12. " GPIO35INCFG ,GPIO35 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 11. " GPIO34INTD ,GPIO34 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 9.--10. " GPIO34OUTCFG ,GPIO34 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 8. " GPIO34INCFG ,GPIO34 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 7. " GPIO33INTD ,GPIO33 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 5.--6. " GPIO33OUTCFG ,GPIO33 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 4. " GPIO33INCFG ,GPIO33 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 3. " GPIO32INTD ,GPIO32 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 1.--2. " GPIO32OUTCFG ,GPIO32 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 0. " GPIO32INCFG ,GPIO32 input enable" "Read data,Always 0"
|
|
line.long 0x14 "CFGF,GPIO Configuration Register F"
|
|
bitfld.long 0x14 31. " GPIO47INTD ,GPIO47 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 29.--30. " GPIO47OUTCFG ,GPIO47 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 28. " GPIO47INCFG ,GPIO47 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 27. " GPIO46INTD ,GPIO46 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 25.--26. " GPIO46OUTCFG ,GPIO46 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 24. " GPIO46INCFG ,GPIO46 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 23. " GPIO45INTD ,GPIO45 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 21.--22. " GPIO45OUTCFG ,GPIO45 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 20. " GPIO45INCFG ,GPIO45 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 19. " GPIO44INTD ,GPIO44 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 17.--18. " GPIO44OUTCFG ,GPIO44 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 16. " GPIO44INCFG ,GPIO44 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 15. " GPIO43INTD ,GPIO43 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 13.--14. " GPIO43OUTCFG ,GPIO43 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 12. " GPIO43INCFG ,GPIO43 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 11. " GPIO42INTD ,GPIO42 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 9.--10. " GPIO42OUTCFG ,GPIO42 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 8. " GPIO42INCFG ,GPIO42 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 7. " GPIO41INTD ,GPIO41 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 5.--6. " GPIO41OUTCFG ,GPIO41 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 4. " GPIO41INCFG ,GPIO41 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 3. " GPIO40INTD ,GPIO40 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 1.--2. " GPIO40OUTCFG ,GPIO40 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 0. " GPIO40INCFG ,GPIO40 input enable" "Read data,Always 0"
|
|
line.long 0x18 "CFGG,GPIO Configuration Register G"
|
|
bitfld.long 0x18 7. " GPIO49INTD ,GPIO49 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x18 5.--6. " GPIO49OUTCFG ,GPIO49 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x18 4. " GPIO49INCFG ,GPIO49 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x18 3. " GPIO48INTD ,GPIO48 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x18 1.--2. " GPIO48OUTCFG ,GPIO48 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x18 0. " GPIO48INCFG ,GPIO48 input enable" "Read data,Always 0"
|
|
else
|
|
rgroup.long 0x00++0x33
|
|
line.long 0x00 "PADREGA,Pad Configuration Register A"
|
|
bitfld.long 0x00 31. " PAD3PWRUP ,Pad 3 upper power switch enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 27.--29. " PAD3FNCSEL ,Pad 3 function select" "TRIG0,SLnCE,M1nCE4,GPIO3,M0nCE,M1nCE,Disabled,?..."
|
|
bitfld.long 0x00 26. " PAD3STRNG ,Pad 3 drive strength" "Low,High"
|
|
bitfld.long 0x00 25. " PAD3INPEN ,Pad 3 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 24. " PAD3PULL ,Pad 3 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19.--21. " PAD2FNCSEL ,Pad 2 function select" "SLWIR3,SLMOSI,CLKOUT,GPIO2,M0MOSI,M1MOSI,M0WIR3,M1WIR3"
|
|
bitfld.long 0x00 18. " PAD2STRNG ,Pad 2 drive strength" "Low,High"
|
|
bitfld.long 0x00 17. " PAD2INPEN ,Pad 2 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " PAD2PULL ,Pad 2 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11.--13. " PAD1FNCSEL ,Pad 1 function select" "SLSDA,SLMISO,UARTRX,GPIO1,M0MISO,M1MISO,M0SDA,M1SDA"
|
|
bitfld.long 0x00 10. " PAD1STRNG ,Pad 1 drive strength" "Low,High"
|
|
bitfld.long 0x00 9. " PAD1INPEN ,Pad 1 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " PAD1PULL ,Pad 1 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3.--5. " PAD0FNCSEL ,Pad 0 function select" "SLSCL,SLSCK,UARTTX,GPIO0,M0SCK,M1SCK,M0SCL,M1SCL"
|
|
bitfld.long 0x00 2. " PAD0STRNG ,Pad 0 drive strength" "Low,High"
|
|
bitfld.long 0x00 1. " PAD0INPEN ,Pad 0 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PAD0PULL ,Pad 0 pullup enable" "Disabled,Enabled"
|
|
line.long 0x04 "PADREGB,Pad Configuration Register B"
|
|
bitfld.long 0x04 27.--29. " PAD7FNCSEL ,Pad 7 function select" "M0WIR3,M0MOSI,CLKOUT,GPIO7,,,SLWIR3,Disabled"
|
|
bitfld.long 0x04 26. " PAD7STRNG ,Pad 7 drive strength" "Low,High"
|
|
bitfld.long 0x04 25. " PAD7INPEN ,Pad 7 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 24. " PAD7PULL ,Pad 7 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 22.--23. " PAD6RSEL ,Pad 6 pullup resistor selection" "1.5 KOhms,6 KOhms,12 KOhms,24 KOhms"
|
|
bitfld.long 0x04 19.--21. " PAD6FNCSEL ,Pad 6 function select" "M0SDA,M0MISO,UACTS,GPIO6,SLMISO,,SLSDA,Disabled"
|
|
bitfld.long 0x04 18. " PAD6STRNG ,Pad 6 drive strength" "Low,High"
|
|
bitfld.long 0x04 17. " PAD6INPEN ,Pad 6 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 16. " PAD6PULL ,Pad 6 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 14.--15. " PAD5RSEL ,Pad 5 pullup resistor selection" "1.5 KOhms,6 KOhms,12 KOhms,24 KOhms"
|
|
bitfld.long 0x04 11.--13. " PAD5FNCSEL ,Pad 5 function select" "M0SCL,M0SCK,UARTS,GPIO5,SLSCK,,SLSCL,Disabled"
|
|
bitfld.long 0x04 10. " PAD5STRNG ,Pad 5 drive strength" "Low,High"
|
|
bitfld.long 0x04 9. " PAD5INPEN ,Pad 5 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 8. " PAD5PULL ,Pad 5 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 7. " PAD4PWRUP ,Pad 4 upper power switch enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 3.--5. " PAD4FNCSEL ,Pad 4 function select" "TRIG1,SLINT,M0nCE5,GPIO4,SLINTGP,SWO,CLKOUT,Disabled"
|
|
bitfld.long 0x04 2. " PAD4STRNG ,Pad 4 drive strength" "Low,High"
|
|
bitfld.long 0x04 1. " PAD4INPEN ,Pad 4 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 0. " PAD4PULL ,Pad 4 pullup enable" "Disabled,Enabled"
|
|
line.long 0x08 "PADREGC,Pad Configuration Register C"
|
|
bitfld.long 0x08 30. " PAD11PWRDN ,Pad 11 lower power switch enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 27.--28. " PAD11FNCSEL ,Pad 11 function select" "ANATST,M0nCE0,CLKOUT,GPIO11"
|
|
bitfld.long 0x08 26. " PAD11STRNG ,Pad 11 drive strength" "Low,High"
|
|
bitfld.long 0x08 25. " PAD11INPEN ,Pad 11 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 24. " PAD11PULL ,Pad 11 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 19.--21. " PAD10FNCSEL ,Pad 10 function select" "M1WIR3,M1MOSI,M0nCE6,GPIO10,,EXTHFA,Disabled,SLWIR3"
|
|
bitfld.long 0x08 18. " PAD10STRNG ,Pad 10 drive strength" "Low,High"
|
|
bitfld.long 0x08 17. " PAD10INPEN ,Pad 10 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 16. " PAD10PULL ,Pad 10 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 14.--15. " PAD9RSEL ,Pad 9 pullup resistor selection" "1.5 KOhms,6 KOhms,12 KOhms,24 KOhms"
|
|
bitfld.long 0x08 11.--13. " PAD9FNCSEL ,Pad 9 function select" "M1SDA,M1MISO,M0nCE5,GPIO9,,SLMISO,Disabled,SLSDA"
|
|
bitfld.long 0x08 10. " PAD9STRNG ,Pad 9 drive strength" "Low,High"
|
|
bitfld.long 0x08 9. " PAD9INPEN ,Pad 9 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 8. " PAD9PULL ,Pad 9 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 6.--7. " PAD8RSEL ,Pad 8 pullup resistor selection" "1.5 KOhms,6 KOhms,12 KOhms,24 KOhms"
|
|
bitfld.long 0x08 3.--5. " PAD8FNCSEL ,Pad 8 function select" "M1SCL,M1SCK,M0nCE4,GPIO8,,SLSCK,Disabled,SLSCL"
|
|
bitfld.long 0x08 2. " PAD8STRNG ,Pad 8 drive strength" "Low,High"
|
|
bitfld.long 0x08 1. " PAD8INPEN ,Pad 8 input enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 0. " PAD8PULL ,Pad 8 pullup enable" "Disabled,Enabled"
|
|
line.long 0x0C "PADREGD,Pad Configuration Register D"
|
|
bitfld.long 0x0C 27.--29. " PAD15FNCSEL ,Pad 15 function select" "ADC3,M1nCE3,UARTRX,GPIO15,,EXTXT,,Disabled"
|
|
bitfld.long 0x0C 26. " PAD15STRNG ,Pad 15 drive strength" "Low,High"
|
|
bitfld.long 0x0C 25. " PAD15INPEN ,Pad 15 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 24. " PAD15PULL ,Pad 15 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 19.--21. " PAD14FNCSEL ,Pad 14 function select" "ADC2,M1nCE2,UARTTX,GPIO14,,EXTHFS,,Disabled"
|
|
bitfld.long 0x0C 18. " PAD14STRNG ,Pad 14 drive strength" "Low,High"
|
|
bitfld.long 0x0C 17. " PAD14INPEN ,Pad 14 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 16. " PAD14PULL ,Pad 14 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 11.--13. " PAD13FNCSEL ,Pad 13 function select" "ADC1,M1nCE1,TCTB0,GPIO13,,EXTHFA,SWO,Disabled"
|
|
bitfld.long 0x0C 10. " PAD13STRNG ,Pad 13 drive strength" "Low,High"
|
|
bitfld.long 0x0C 9. " PAD13INPEN ,Pad 13 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 8. " PAD13PULL ,Pad 13 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 3.--4. " PAD12FNCSEL ,Pad 12 function select" "ADC0,M1nCE0,TCTA0,GPIO12"
|
|
bitfld.long 0x0C 2. " PAD12STRNG ,Pad 12 drive strength" "Low,High"
|
|
bitfld.long 0x0C 1. " PAD12INPEN ,Pad 12 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " PAD12PULL ,Pad 12 pullup enable" "Disabled,Enabled"
|
|
line.long 0x10 "PADREGE,Pad Configuration Register E"
|
|
bitfld.long 0x10 27.--28. " PAD19FNCSEL ,Pad 19 function select" "CMPRF,M0nCE3,TCTB1,GPIO19"
|
|
bitfld.long 0x10 26. " PAD19STRNG ,Pad 19 drive strength" "Low,High"
|
|
bitfld.long 0x10 25. " PAD19INPEN ,Pad 19 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 24. " PAD19PULL ,Pad 19 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 19.--20. " PAD18FNCSEL ,Pad 18 function select" "CMPIN1,M0nCE2,TCTA1,GPIO18"
|
|
bitfld.long 0x10 18. " PAD18STRNG ,Pad 18 drive strength" "Low,High"
|
|
bitfld.long 0x10 17. " PAD18INPEN ,Pad 18 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 16. " PAD18PULL ,Pad 18 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 11.--13. " PAD17FNCSEL ,Pad 17 function select" "CMPIN0,M0nCE1,TRIG3,GPIO17,,EXTLF,,Disabled"
|
|
bitfld.long 0x10 10. " PAD17STRNG ,Pad 17 drive strength" "Low,High"
|
|
bitfld.long 0x10 9. " PAD17INPEN ,Pad 17 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 8. " PAD17PULL ,Pad 17 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 3.--4. " PAD16FNCSEL ,Pad 16 function select" "ADCREF,M0nCE4,TRIG2,GPIO16"
|
|
bitfld.long 0x10 2. " PAD16STRNG ,Pad 16 drive strength" "Low,High"
|
|
bitfld.long 0x10 1. " PAD16INPEN ,Pad 16 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 0. " PAD16PULL ,Pad 16 pullup enable" "Disabled,Enabled"
|
|
line.long 0x14 "PADREGF,Pad Configuration Register F"
|
|
bitfld.long 0x14 27.--28. " PAD23FNCSEL ,Pad 23 function select" "UARTRX,M0nCE0,TCTB3,GPIO23"
|
|
bitfld.long 0x14 26. " PAD23STRNG ,Pad 23 drive strength" "Low,High"
|
|
bitfld.long 0x14 25. " PAD23INPEN ,Pad 23 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x14 24. " PAD23PULL ,Pad 23 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x14 19.--20. " PAD22FNCSEL ,Pad 22 function select" "UARTTX,M1nCE7,TCTA3,GPIO22"
|
|
bitfld.long 0x14 18. " PAD22STRNG ,Pad 22 drive strength" "Low,High"
|
|
bitfld.long 0x14 17. " PAD22INPEN ,Pad 22 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x14 16. " PAD22PULL ,Pad 22 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x14 11.--12. " PAD21FNCSEL ,Pad 21 function select" "SWDIO,M1nCE6,TCTB2,GPIO21"
|
|
bitfld.long 0x14 10. " PAD21STRNG ,Pad 21 drive strength" "Low,High"
|
|
bitfld.long 0x14 9. " PAD21INPEN ,Pad 21 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x14 8. " PAD21PULL ,Pad 21 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x14 3.--4. " PAD20FNCSEL ,Pad 20 function select" "SWDCK,M1nCE5,TCTA2,GPIO20"
|
|
bitfld.long 0x14 2. " PAD20STRNG ,Pad 20 drive strength" "Low,High"
|
|
bitfld.long 0x14 1. " PAD20INPEN ,Pad 20 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x14 0. " PAD20PULL ,Pad 20 pulldown enable" "Disabled,Enabled"
|
|
line.long 0x18 "PADREGG,Pad Configuration Register G"
|
|
bitfld.long 0x18 27.--28. " PAD27FNCSEL ,Pad 27 function select" "EXTHF,M1nCE4,TCTA1,GPIO27"
|
|
bitfld.long 0x18 26. " PAD27STRNG ,Pad 27 drive strength" "Low,High"
|
|
bitfld.long 0x18 25. " PAD27INPEN ,Pad 27 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 24. " PAD27PULL ,Pad 27 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 19.--20. " PAD26FNCSEL ,Pad 26 function select" "EXTLF,M0nCE3,TCTB0,GPIO26"
|
|
bitfld.long 0x18 18. " PAD26STRNG ,Pad 26 drive strength" "Low,High"
|
|
bitfld.long 0x18 17. " PAD26INPEN ,Pad 26 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 16. " PAD26PULL ,Pad 26 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 11.--12. " PAD25FNCSEL ,Pad 25 function select" "EXTXT,M0nCE2,TCTA0,GPIO25"
|
|
bitfld.long 0x18 10. " PAD25STRNG ,Pad 25 drive strength" "Low,High"
|
|
bitfld.long 0x18 9. " PAD25INPEN ,Pad 25 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 8. " PAD25PULL ,Pad 25 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 3.--4. " PAD24FNCSEL ,Pad 24 function select" "Disabled,M0nCE1,CLKOUT,GPIO24"
|
|
bitfld.long 0x18 2. " PAD24STRNG ,Pad 24 drive strength" "Low,High"
|
|
bitfld.long 0x18 1. " PAD24INPEN ,Pad 24 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 0. " PAD24PULL ,Pad 24 pullup enable" "Disabled,Enabled"
|
|
line.long 0x1C "PADREGH,Pad Configuration Register H"
|
|
bitfld.long 0x1C 27.--28. " PAD31FNCSEL ,Pad 31 function select" "ADC6,M0nCE4,TCTA3,GPIO31"
|
|
bitfld.long 0x1C 26. " PAD31STRNG ,Pad 31 drive strength" "Low,High"
|
|
bitfld.long 0x1C 25. " PAD31INPEN ,Pad 31 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x1C 24. " PAD31PULL ,Pad 31 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 19.--20. " PAD30FNCSEL ,Pad 30 function select" "ADC5,M1nCE7,TCTB2,GPIO30"
|
|
bitfld.long 0x1C 18. " PAD30STRNG ,Pad 30 drive strength" "Low,High"
|
|
bitfld.long 0x1C 17. " PAD30INPEN ,Pad 30 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x1C 16. " PAD30PULL ,Pad 30 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 11.--12. " PAD29FNCSEL ,Pad 29 function select" "ADC4,M1nCE6,TCTA2,GPIO29"
|
|
bitfld.long 0x1C 10. " PAD29STRNG ,Pad 29 drive strength" "Low,High"
|
|
bitfld.long 0x1C 9. " PAD29INPEN ,Pad 29 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x1C 8. " PAD29PULL ,Pad 29 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 3.--4. " PAD28FNCSEL ,Pad 28 function select" "Disabled,M1nCE5,TCTB1,GPIO28"
|
|
bitfld.long 0x1C 2. " PAD28STRNG ,Pad 28 drive strength" "Low,High"
|
|
bitfld.long 0x1C 1. " PAD28INPEN ,Pad 28 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x1C 0. " PAD28PULL ,Pad 28 pullup enable" "Disabled,Enabled"
|
|
line.long 0x20 "PADREGI,Pad Configuration Register I"
|
|
bitfld.long 0x20 27.--28. " PAD35FNCSEL ,Pad 35 function select" "Disabled,M1nCE0,UARTTX,GPIO35"
|
|
bitfld.long 0x20 26. " PAD35STRNG ,Pad 35 drive strength" "Low,High"
|
|
bitfld.long 0x20 25. " PAD35INPEN ,Pad 35 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 24. " PAD35PULL ,Pad 35 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 19.--20. " PAD34FNCSEL ,Pad 34 function select" "CMPRF2,M0nCE7,Disabled,GPIO34"
|
|
bitfld.long 0x20 18. " PAD34STRNG ,Pad 34 drive strength" "Low,High"
|
|
bitfld.long 0x20 17. " PAD34INPEN ,Pad 34 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 16. " PAD34PULL ,Pad 34 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 11.--12. " PAD33FNCSEL ,Pad 33 function select" "CMPRF1,M0nCE6,Disabled,GPIO33"
|
|
bitfld.long 0x20 10. " PAD33STRNG ,Pad 33 drive strength" "Low,High"
|
|
bitfld.long 0x20 9. " PAD33INPEN ,Pad 33 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 8. " PAD33PULL ,Pad 33 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 3.--4. " PAD32FNCSEL ,Pad 32 function select" "ADC7,M0nCE5,TCTB3,GPIO32"
|
|
bitfld.long 0x20 2. " PAD32STRNG ,Pad 32 drive strength" "Low,High"
|
|
bitfld.long 0x20 1. " PAD32INPEN ,Pad 32 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 0. " PAD32PULL ,Pad 32 pullup enable" "Disabled,Enabled"
|
|
line.long 0x24 "PADREGJ,Pad Configuration Register J"
|
|
bitfld.long 0x24 27.--28. " PAD39FNCSEL ,Pad 39 function select" "TRIG2,UARTTX,CLKOUT,GPIO39"
|
|
bitfld.long 0x24 26. " PAD39STRNG ,Pad 39 drive strength" "Low,High"
|
|
bitfld.long 0x24 25. " PAD39INPEN ,Pad 39 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 24. " PAD39PULL ,Pad 39 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x24 19.--20. " PAD38FNCSEL ,Pad 38 function select" "TRIG1,M1nCE3,UACTS,GPIO38"
|
|
bitfld.long 0x24 18. " PAD38STRNG ,Pad 38 drive strength" "Low,High"
|
|
bitfld.long 0x24 17. " PAD38INPEN ,Pad 38 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 16. " PAD38PULL ,Pad 38 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x24 11.--12. " PAD37FNCSEL ,Pad 37 function select" "TRIG0,M1nCE2,UARTS,GPIO37"
|
|
bitfld.long 0x24 10. " PAD37STRNG ,Pad 37 drive strength" "Low,High"
|
|
bitfld.long 0x24 9. " PAD37INPEN ,Pad 37 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 8. " PAD37PULL ,Pad 37 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x24 3.--4. " PAD36FNCSEL ,Pad 36 function select" "Disabled,M1nCE1,UARTRX,GPIO36"
|
|
bitfld.long 0x24 2. " PAD36STRNG ,Pad 36 drive strength" "Low,High"
|
|
bitfld.long 0x24 1. " PAD36INPEN ,Pad 36 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 0. " PAD36PULL ,Pad 36 pullup enable" "Disabled,Enabled"
|
|
line.long 0x28 "PADREGK,Pad Configuration Register K"
|
|
bitfld.long 0x28 27.--28. " PAD43FNCSEL ,Pad 43 function select" "TRIG6,M0nCE1,TCTB0,GPIO43"
|
|
bitfld.long 0x28 26. " PAD43STRNG ,Pad 43 drive strength" "Low,High"
|
|
bitfld.long 0x28 25. " PAD43INPEN ,Pad 43 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x28 24. " PAD43PULL ,Pad 43 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x28 19.--20. " PAD42FNCSEL ,Pad 42 function select" "TRIG5,M0nCE0,TCTA0,GPIO42"
|
|
bitfld.long 0x28 18. " PAD42STRNG ,Pad 42 drive strength" "Low,High"
|
|
bitfld.long 0x28 17. " PAD42INPEN ,Pad 42 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x28 16. " PAD42PULL ,Pad 42 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x28 11.--12. " PAD41FNCSEL ,Pad 41 function select" "TRIG4,Disabled,SWO,GPIO41"
|
|
bitfld.long 0x28 10. " PAD41STRNG ,Pad 41 drive strength" "Low,High"
|
|
bitfld.long 0x28 9. " PAD41INPEN ,Pad 41 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x28 8. " PAD41PULL ,Pad 41 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x28 3.--4. " PAD40FNCSEL ,Pad 40 function select" "TRIG3,UARTRX,Disabled,GPIO40"
|
|
bitfld.long 0x28 2. " PAD40STRNG ,Pad 40 drive strength" "Low,High"
|
|
bitfld.long 0x28 1. " PAD40INPEN ,Pad 40 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x28 0. " PAD40PULL ,Pad 40 pullup enable" "Disabled,Enabled"
|
|
line.long 0x2C "PADREGL,Pad Configuration Register L"
|
|
bitfld.long 0x2C 27.--28. " PAD47FNCSEL ,Pad 47 function select" "Disabled,M0nCE5,TCTB2,GPIO47"
|
|
bitfld.long 0x2C 26. " PAD47STRNG ,Pad 47 drive strength" "Low,High"
|
|
bitfld.long 0x2C 25. " PAD47INPEN ,Pad 47 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x2C 24. " PAD47PULL ,Pad 47 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x2C 19.--20. " PAD46FNCSEL ,Pad 46 function select" "Disabled,M0nCE4,TCTA2,GPIO46"
|
|
bitfld.long 0x2C 18. " PAD46STRNG ,Pad 46 drive strength" "Low,High"
|
|
bitfld.long 0x2C 17. " PAD46INPEN ,Pad 46 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x2C 16. " PAD46PULL ,Pad 46 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x2C 11.--12. " PAD45FNCSEL ,Pad 45 function select" "Disabled,M0nCE3,TCTB1,GPIO45"
|
|
bitfld.long 0x2C 10. " PAD45STRNG ,Pad 45 drive strength" "Low,High"
|
|
bitfld.long 0x2C 9. " PAD45INPEN ,Pad 45 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x2C 8. " PAD45PULL ,Pad 45 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x2C 3.--4. " PAD44FNCSEL ,Pad 44 function select" "TRIG7,M0nCE2,TCTA1,GPIO44"
|
|
bitfld.long 0x2C 2. " PAD44STRNG ,Pad 44 drive strength" "Low,High"
|
|
bitfld.long 0x2C 1. " PAD44INPEN ,Pad 44 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x2C 0. " PAD44PULL ,Pad 44 pullup enable" "Disabled,Enabled"
|
|
line.long 0x30 "PADREGM,Pad Configuration Register M"
|
|
bitfld.long 0x30 11.--12. " PAD49FNCSEL ,Pad 49 function select" "Disabled,M0nCE7,TCTB3,GPIO49"
|
|
bitfld.long 0x30 10. " PAD49STRNG ,Pad 49 drive strength" "Low,High"
|
|
bitfld.long 0x30 9. " PAD49INPEN ,Pad 49 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x30 8. " PAD49PULL ,Pad 49 pullup enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x30 3.--4. " PAD48FNCSEL ,Pad 48 function select" "Disabled,M0nCE6,TCTA3,GPIO48"
|
|
bitfld.long 0x30 2. " PAD48STRNG ,Pad 48 drive strength" "Low,High"
|
|
bitfld.long 0x30 1. " PAD48INPEN ,Pad 48 input enable" "Disabled,Enabled"
|
|
bitfld.long 0x30 0. " PAD48PULL ,Pad 48 pullup enable" "Disabled,Enabled"
|
|
rgroup.long 0x40++0x1B
|
|
line.long 0x00 "CFGA,GPIO Configuration Register A"
|
|
bitfld.long 0x00 31. " GPIO7INTD ,GPIO7 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 29.--30. " GPIO7OUTCFG ,GPIO7 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 28. " GPIO7INCFG ,GPIO7 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 27. " GPIO6INTD ,GPIO6 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 25.--26. " GPIO6OUTCFG ,GPIO6 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 24. " GPIO6INCFG ,GPIO6 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 23. " GPIO5INTD ,GPIO5 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 21.--22. " GPIO5OUTCFG ,GPIO5 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 20. " GPIO5INCFG ,GPIO5 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 19. " GPIO4INTD ,GPIO4 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 17.--18. " GPIO4OUTCFG ,GPIO4 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 16. " GPIO4INCFG ,GPIO4 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 15. " GPIO3INTD ,GPIO3 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 13.--14. " GPIO3OUTCFG ,GPIO3 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 12. " GPIO3INCFG ,GPIO3 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 11. " GPIO2INTD ,GPIO2 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 9.--10. " GPIO2OUTCFG ,GPIO2 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 8. " GPIO2INCFG ,GPIO2 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 7. " GPIO1INTD ,GPIO1 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 5.--6. " GPIO1OUTCFG ,GPIO1 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 4. " GPIO1INCFG ,GPIO1 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x00 3. " GPIO0INTD ,GPIO0 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x00 1.--2. " GPIO0OUTCFG ,GPIO0 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x00 0. " GPIO0INCFG ,GPIO0 input enable" "Read data,Always 0"
|
|
line.long 0x04 "CFGB,GPIO Configuration Register B"
|
|
bitfld.long 0x04 31. " GPIO15INTD ,GPIO15 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 29.--30. " GPIO15OUTCFG ,GPIO15 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 28. " GPIO15INCFG ,GPIO15 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 27. " GPIO14INTD ,GPIO14 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 25.--26. " GPIO14OUTCFG ,GPIO14 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 24. " GPIO14INCFG ,GPIO14 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 23. " GPIO13INTD ,GPIO13 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 21.--22. " GPIO13OUTCFG ,GPIO13 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 20. " GPIO13INCFG ,GPIO13 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 19. " GPIO12INTD ,GPIO12 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 17.--18. " GPIO12OUTCFG ,GPIO12 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 16. " GPIO12INCFG ,GPIO12 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 15. " GPIO11INTD ,GPIO11 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 13.--14. " GPIO11OUTCFG ,GPIO11 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 12. " GPIO11INCFG ,GPIO11 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 11. " GPIO10INTD ,GPIO10 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 9.--10. " GPIO10OUTCFG ,GPIO10 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 8. " GPIO10INCFG ,GPIO10 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 7. " GPIO9INTD ,GPIO9 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 5.--6. " GPIO9OUTCFG ,GPIO9 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 4. " GPIO9INCFG ,GPIO9 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x04 3. " GPIO8INTD ,GPIO8 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x04 1.--2. " GPIO8OUTCFG ,GPIO8 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x04 0. " GPIO8INCFG ,GPIO8 input enable" "Read data,Always 0"
|
|
line.long 0x08 "CFGC,GPIO Configuration Register C"
|
|
bitfld.long 0x08 31. " GPIO23INTD ,GPIO23 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 29.--30. " GPIO23OUTCFG ,GPIO23 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 28. " GPIO23INCFG ,GPIO23 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 27. " GPIO22INTD ,GPIO22 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 25.--26. " GPIO22OUTCFG ,GPIO22 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 24. " GPIO22INCFG ,GPIO22 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 23. " GPIO21INTD ,GPIO21 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 21.--22. " GPIO21OUTCFG ,GPIO21 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 20. " GPIO21INCFG ,GPIO21 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 19. " GPIO20INTD ,GPIO20 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 17.--18. " GPIO20OUTCFG ,GPIO20 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 16. " GPIO20INCFG ,GPIO20 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 15. " GPIO19INTD ,GPIO19 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 13.--14. " GPIO19OUTCFG ,GPIO19 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 12. " GPIO19INCFG ,GPIO19 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 11. " GPIO18INTD ,GPIO18 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 9.--10. " GPIO18OUTCFG ,GPIO18 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 8. " GPIO18INCFG ,GPIO18 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 7. " GPIO17INTD ,GPIO17 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 5.--6. " GPIO17OUTCFG ,GPIO17 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 4. " GPIO17INCFG ,GPIO17 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x08 3. " GPIO16INTD ,GPIO16 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x08 1.--2. " GPIO16OUTCFG ,GPIO16 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x08 0. " GPIO16INCFG ,GPIO16 input enable" "Read data,Always 0"
|
|
line.long 0x0C "CFGD,GPIO Configuration Register D"
|
|
bitfld.long 0x0C 31. " GPIO31INTD ,GPIO31 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 29.--30. " GPIO31OUTCFG ,GPIO31 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 28. " GPIO31INCFG ,GPIO31 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 27. " GPIO30INTD ,GPIO30 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 25.--26. " GPIO30OUTCFG ,GPIO30 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 24. " GPIO30INCFG ,GPIO30 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 23. " GPIO29INTD ,GPIO29 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 21.--22. " GPIO29OUTCFG ,GPIO29 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 20. " GPIO29INCFG ,GPIO29 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 19. " GPIO28INTD ,GPIO28 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 17.--18. " GPIO28OUTCFG ,GPIO28 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 16. " GPIO28INCFG ,GPIO28 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 15. " GPIO27INTD ,GPIO27 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 13.--14. " GPIO27OUTCFG ,GPIO27 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 12. " GPIO27INCFG ,GPIO27 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 11. " GPIO26INTD ,GPIO26 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 9.--10. " GPIO26OUTCFG ,GPIO26 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 8. " GPIO26INCFG ,GPIO26 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 7. " GPIO25INTD ,GPIO25 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 5.--6. " GPIO25OUTCFG ,GPIO25 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 4. " GPIO25INCFG ,GPIO25 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x0C 3. " GPIO24INTD ,GPIO24 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x0C 1.--2. " GPIO24OUTCFG ,GPIO24 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x0C 0. " GPIO24INCFG ,GPIO24 input enable" "Read data,Always 0"
|
|
line.long 0x10 "CFGE,GPIO Configuration Register E"
|
|
bitfld.long 0x10 31. " GPIO39INTD ,GPIO39 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 29.--30. " GPIO39OUTCFG ,GPIO39 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 28. " GPIO39INCFG ,GPIO39 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 27. " GPIO38INTD ,GPIO38 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 25.--26. " GPIO38OUTCFG ,GPIO38 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 24. " GPIO38INCFG ,GPIO38 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 23. " GPIO37INTD ,GPIO37 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 21.--22. " GPIO37OUTCFG ,GPIO37 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 20. " GPIO37INCFG ,GPIO37 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 19. " GPIO36INTD ,GPIO36 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 17.--18. " GPIO36OUTCFG ,GPIO36 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 16. " GPIO36INCFG ,GPIO36 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 15. " GPIO35INTD ,GPIO35 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 13.--14. " GPIO35OUTCFG ,GPIO35 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 12. " GPIO35INCFG ,GPIO35 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 11. " GPIO34INTD ,GPIO34 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 9.--10. " GPIO34OUTCFG ,GPIO34 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 8. " GPIO34INCFG ,GPIO34 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 7. " GPIO33INTD ,GPIO33 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 5.--6. " GPIO33OUTCFG ,GPIO33 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 4. " GPIO33INCFG ,GPIO33 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x10 3. " GPIO32INTD ,GPIO32 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x10 1.--2. " GPIO32OUTCFG ,GPIO32 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x10 0. " GPIO32INCFG ,GPIO32 input enable" "Read data,Always 0"
|
|
line.long 0x14 "CFGF,GPIO Configuration Register F"
|
|
bitfld.long 0x14 31. " GPIO47INTD ,GPIO47 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 29.--30. " GPIO47OUTCFG ,GPIO47 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 28. " GPIO47INCFG ,GPIO47 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 27. " GPIO46INTD ,GPIO46 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 25.--26. " GPIO46OUTCFG ,GPIO46 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 24. " GPIO46INCFG ,GPIO46 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 23. " GPIO45INTD ,GPIO45 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 21.--22. " GPIO45OUTCFG ,GPIO45 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 20. " GPIO45INCFG ,GPIO45 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 19. " GPIO44INTD ,GPIO44 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 17.--18. " GPIO44OUTCFG ,GPIO44 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 16. " GPIO44INCFG ,GPIO44 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 15. " GPIO43INTD ,GPIO43 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 13.--14. " GPIO43OUTCFG ,GPIO43 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 12. " GPIO43INCFG ,GPIO43 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 11. " GPIO42INTD ,GPIO42 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 9.--10. " GPIO42OUTCFG ,GPIO42 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 8. " GPIO42INCFG ,GPIO42 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 7. " GPIO41INTD ,GPIO41 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 5.--6. " GPIO41OUTCFG ,GPIO41 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 4. " GPIO41INCFG ,GPIO41 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x14 3. " GPIO40INTD ,GPIO40 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x14 1.--2. " GPIO40OUTCFG ,GPIO40 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x14 0. " GPIO40INCFG ,GPIO40 input enable" "Read data,Always 0"
|
|
line.long 0x18 "CFGG,GPIO Configuration Register G"
|
|
bitfld.long 0x18 7. " GPIO49INTD ,GPIO49 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x18 5.--6. " GPIO49OUTCFG ,GPIO49 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x18 4. " GPIO49INCFG ,GPIO49 input enable" "Read data,Always 0"
|
|
textline " "
|
|
bitfld.long 0x18 3. " GPIO48INTD ,GPIO48 interrupt direction" "Low to high,High to low"
|
|
bitfld.long 0x18 1.--2. " GPIO48OUTCFG ,GPIO48 output configuration" "Disabled,Push-pull,Open drain,Tri-state"
|
|
bitfld.long 0x18 0. " GPIO48INCFG ,GPIO48 input enable" "Read data,Always 0"
|
|
endif
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "PADKEY,Key Register for all pad configuration registers"
|
|
rgroup.long 0x80++0x07
|
|
line.long 0x00 "RDA,GPIO Input Register A"
|
|
bitfld.long 0x00 31. " RD[31] ,GPIO31 read data" "Low,High"
|
|
bitfld.long 0x00 30. " [30] ,GPIO30 read data" "Low,High"
|
|
bitfld.long 0x00 29. " [29] ,GPIO29 read data" "Low,High"
|
|
bitfld.long 0x00 28. " [28] ,GPIO28 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x00 27. " [27] ,GPIO27 read data" "Low,High"
|
|
bitfld.long 0x00 26. " [26] ,GPIO26 read data" "Low,High"
|
|
bitfld.long 0x00 25. " [25] ,GPIO25 read data" "Low,High"
|
|
bitfld.long 0x00 24. " [24] ,GPIO24 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x00 23. " [23] ,GPIO23 read data" "Low,High"
|
|
bitfld.long 0x00 22. " [22] ,GPIO22 read data" "Low,High"
|
|
bitfld.long 0x00 21. " [21] ,GPIO21 read data" "Low,High"
|
|
bitfld.long 0x00 20. " [20] ,GPIO20 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x00 19. " [19] ,GPIO19 read data" "Low,High"
|
|
bitfld.long 0x00 18. " [18] ,GPIO18 read data" "Low,High"
|
|
bitfld.long 0x00 17. " [17] ,GPIO17 read data" "Low,High"
|
|
bitfld.long 0x00 16. " [16] ,GPIO16 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x00 15. " [15] ,GPIO15 read data" "Low,High"
|
|
bitfld.long 0x00 14. " [14] ,GPIO14 read data" "Low,High"
|
|
bitfld.long 0x00 13. " [13] ,GPIO13 read data" "Low,High"
|
|
bitfld.long 0x00 12. " [12] ,GPIO12 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x00 11. " [11] ,GPIO11 read data" "Low,High"
|
|
bitfld.long 0x00 10. " [10] ,GPIO10 read data" "Low,High"
|
|
bitfld.long 0x00 9. " [9] ,GPIO9 read data" "Low,High"
|
|
bitfld.long 0x00 8. " [8] ,GPIO8 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x00 7. " [7] ,GPIO7 read data" "Low,High"
|
|
bitfld.long 0x00 6. " [6] ,GPIO6 read data" "Low,High"
|
|
bitfld.long 0x00 5. " [5] ,GPIO5 read data" "Low,High"
|
|
bitfld.long 0x00 4. " [4] ,GPIO4 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x00 3. " [3] ,GPIO3 read data" "Low,High"
|
|
bitfld.long 0x00 2. " [2] ,GPIO2 read data" "Low,High"
|
|
bitfld.long 0x00 1. " [1] ,GPIO1 read data" "Low,High"
|
|
bitfld.long 0x00 0. " [0] ,GPIO0 read data" "Low,High"
|
|
line.long 0x04 "RDB,GPIO Input Register B"
|
|
bitfld.long 0x04 17. " RD[49] ,GPIO49 read data" "Low,High"
|
|
bitfld.long 0x04 16. " [48] ,GPIO48 read data" "Low,High"
|
|
bitfld.long 0x04 15. " [47] ,GPIO47 read data" "Low,High"
|
|
bitfld.long 0x04 14. " [46] ,GPIO46 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x04 13. " [45] ,GPIO45 read data" "Low,High"
|
|
bitfld.long 0x04 12. " [44] ,GPIO44 read data" "Low,High"
|
|
bitfld.long 0x04 11. " [43] ,GPIO43 read data" "Low,High"
|
|
bitfld.long 0x04 10. " [42] ,GPIO42 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x04 9. " [41] ,GPIO41 read data" "Low,High"
|
|
bitfld.long 0x04 8. " [40] ,GPIO40 read data" "Low,High"
|
|
bitfld.long 0x04 7. " [39] ,GPIO39 read data" "Low,High"
|
|
bitfld.long 0x04 6. " [38] ,GPIO38 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x04 5. " [37] ,GPIO37 read data" "Low,High"
|
|
bitfld.long 0x04 4. " [36] ,GPIO36 read data" "Low,High"
|
|
bitfld.long 0x04 3. " [35] ,GPIO35 read data" "Low,High"
|
|
bitfld.long 0x04 2. " [34] ,GPIO34 read data" "Low,High"
|
|
textline " "
|
|
bitfld.long 0x04 1. " [33] ,GPIO33 read data" "Low,High"
|
|
bitfld.long 0x04 0. " [32] ,GPIO32 read data" "Low,High"
|
|
group.long 0x88++0x03
|
|
line.long 0x00 "WTA,GPIO Output Register A"
|
|
setclrfld.long 0x00 31. 0x08 31. 0x10 31. " WT[31] ,GPIO31 write data" "Low,High"
|
|
setclrfld.long 0x00 30. 0x08 30. 0x10 30. " [30] ,GPIO30 write data" "Low,High"
|
|
setclrfld.long 0x00 29. 0x08 29. 0x10 29. " [29] ,GPIO29 write data" "Low,High"
|
|
setclrfld.long 0x00 28. 0x08 28. 0x10 28. " [28] ,GPIO28 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 27. 0x08 27. 0x10 27. " [27] ,GPIO27 write data" "Low,High"
|
|
setclrfld.long 0x00 26. 0x08 26. 0x10 26. " [26] ,GPIO26 write data" "Low,High"
|
|
setclrfld.long 0x00 25. 0x08 25. 0x10 25. " [25] ,GPIO25 write data" "Low,High"
|
|
setclrfld.long 0x00 24. 0x08 24. 0x10 24. " [24] ,GPIO24 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 23. 0x08 23. 0x10 23. " [23] ,GPIO23 write data" "Low,High"
|
|
setclrfld.long 0x00 22. 0x08 22. 0x10 22. " [22] ,GPIO22 write data" "Low,High"
|
|
setclrfld.long 0x00 21. 0x08 21. 0x10 21. " [21] ,GPIO21 write data" "Low,High"
|
|
setclrfld.long 0x00 20. 0x08 20. 0x10 20. " [20] ,GPIO20 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x08 19. 0x10 19. " [19] ,GPIO19 write data" "Low,High"
|
|
setclrfld.long 0x00 18. 0x08 18. 0x10 18. " [18] ,GPIO18 write data" "Low,High"
|
|
setclrfld.long 0x00 17. 0x08 17. 0x10 17. " [17] ,GPIO17 write data" "Low,High"
|
|
setclrfld.long 0x00 16. 0x08 16. 0x10 16. " [16] ,GPIO16 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 15. 0x08 15. 0x10 15. " [15] ,GPIO15 write data" "Low,High"
|
|
setclrfld.long 0x00 14. 0x08 14. 0x10 14. " [14] ,GPIO14 write data" "Low,High"
|
|
setclrfld.long 0x00 13. 0x08 13. 0x10 13. " [13] ,GPIO13 write data" "Low,High"
|
|
setclrfld.long 0x00 12. 0x08 12. 0x10 12. " [12] ,GPIO12 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 11. 0x08 11. 0x10 11. " [11] ,GPIO11 write data" "Low,High"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x10 10. " [10] ,GPIO10 write data" "Low,High"
|
|
setclrfld.long 0x00 9. 0x08 9. 0x10 9. " [9] ,GPIO9 write data" "Low,High"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x10 8. " [8] ,GPIO8 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x08 7. 0x10 7. " [7] ,GPIO7 write data" "Low,High"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x10 6. " [6] ,GPIO6 write data" "Low,High"
|
|
setclrfld.long 0x00 5. 0x08 5. 0x10 5. " [5] ,GPIO5 write data" "Low,High"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x10 4. " [4] ,GPIO4 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x10 3. " [3] ,GPIO3 write data" "Low,High"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x10 2. " [2] ,GPIO2 write data" "Low,High"
|
|
setclrfld.long 0x00 1. 0x08 1. 0x10 1. " [1] ,GPIO1 write data" "Low,High"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x10 0. " [0] ,GPIO0 write data" "Low,High"
|
|
group.long 0x8C++0x03
|
|
line.long 0x00 "WTB,GPIO Output Register B"
|
|
setclrfld.long 0x00 17. 0x08 17. 0x10 17. " WT[49] ,GPIO49 write data" "Low,High"
|
|
setclrfld.long 0x00 16. 0x08 16. 0x10 16. " [48] ,GPIO48 write data" "Low,High"
|
|
setclrfld.long 0x00 15. 0x08 15. 0x10 15. " [47] ,GPIO47 write data" "Low,High"
|
|
setclrfld.long 0x00 14. 0x08 14. 0x10 14. " [46] ,GPIO46 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x08 13. 0x10 13. " [45] ,GPIO45 write data" "Low,High"
|
|
setclrfld.long 0x00 12. 0x08 12. 0x10 12. " [44] ,GPIO44 write data" "Low,High"
|
|
setclrfld.long 0x00 11. 0x08 11. 0x10 11. " [43] ,GPIO43 write data" "Low,High"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x10 10. " [42] ,GPIO42 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 9. 0x08 9. 0x10 9. " [41] ,GPIO41 write data" "Low,High"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x10 8. " [40] ,GPIO40 write data" "Low,High"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x10 7. " [39] ,GPIO39 write data" "Low,High"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x10 6. " [38] ,GPIO38 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x10 5. " [37] ,GPIO37 write data" "Low,High"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x10 4. " [36] ,GPIO36 write data" "Low,High"
|
|
setclrfld.long 0x00 3. 0x08 3. 0x10 3. " [35] ,GPIO35 write data" "Low,High"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x10 2. " [34] ,GPIO34 write data" "Low,High"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x10 1. " [33] ,GPIO33 write data" "Low,High"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x10 0. " [32] ,GPIO32 write data" "Low,High"
|
|
group.long 0xA0++0x03
|
|
line.long 0x00 "ENA,GPIO Enable Register A"
|
|
setclrfld.long 0x00 31. 0x08 31. 0x14 31. " EN[31] ,GPIO31 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x08 30. 0x14 30. " [30] ,GPIO30 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x08 29. 0x14 29. " [29] ,GPIO29 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x08 28. 0x14 28. " [28] ,GPIO28 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 27. 0x08 27. 0x14 27. " [27] ,GPIO27 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x08 26. 0x14 26. " [26] ,GPIO26 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 25. 0x08 25. 0x14 25. " [25] ,GPIO25 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x08 24. 0x14 24. " [24] ,GPIO24 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 23. 0x08 23. 0x14 23. " [23] ,GPIO23 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x08 22. 0x14 22. " [22] ,GPIO22 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x08 21. 0x14 21. " [21] ,GPIO21 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x08 20. 0x14 20. " [20] ,GPIO20 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x08 19. 0x14 19. " [19] ,GPIO19 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x08 18. 0x14 18. " [18] ,GPIO18 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x08 17. 0x14 17. " [17] ,GPIO17 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x08 16. 0x14 16. " [16] ,GPIO16 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 15. 0x08 15. 0x14 15. " [15] ,GPIO15 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x08 14. 0x14 14. " [14] ,GPIO14 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 13. 0x08 13. 0x14 13. " [13] ,GPIO13 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x08 12. 0x14 12. " [12] ,GPIO12 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 11. 0x08 11. 0x14 11. " [11] ,GPIO11 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x14 10. " [10] ,GPIO10 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x08 9. 0x14 9. " [9] ,GPIO9 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x14 8. " [8] ,GPIO8 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x08 7. 0x14 7. " [7] ,GPIO7 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x14 6. " [6] ,GPIO6 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x08 5. 0x14 5. " [5] ,GPIO5 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x14 4. " [4] ,GPIO4 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x14 3. " [3] ,GPIO3 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x14 2. " [2] ,GPIO2 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 1. 0x08 1. 0x14 1. " [1] ,GPIO1 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x14 0. " [0] ,GPIO0 output enable" "Disabled,Enabled"
|
|
group.long 0xA4++0x03
|
|
line.long 0x00 "ENB,GPIO Enable Register B"
|
|
setclrfld.long 0x00 17. 0x08 17. 0x14 17. " EN[49] ,GPIO49 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x08 16. 0x14 16. " [48] ,GPIO48 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x08 15. 0x14 15. " [47] ,GPIO47 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x08 14. 0x14 14. " [46] ,GPIO46 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x08 13. 0x14 13. " [45] ,GPIO45 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x08 12. 0x14 12. " [44] ,GPIO44 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x08 11. 0x14 11. " [43] ,GPIO43 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x14 10. " [42] ,GPIO42 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 9. 0x08 9. 0x14 9. " [41] ,GPIO41 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x14 8. " [40] ,GPIO40 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x14 7. " [39] ,GPIO39 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x14 6. " [38] ,GPIO38 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x14 5. " [37] ,GPIO37 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x14 4. " [36] ,GPIO36 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x08 3. 0x14 3. " [35] ,GPIO35 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x14 2. " [34] ,GPIO34 output enable" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x14 1. " [33] ,GPIO33 output enable" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x14 0. " [32] ,GPIO32 output enable" "Disabled,Enabled"
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INT0EN,GPIO Interrupt Registers 31-0: Enable"
|
|
bitfld.long 0x00 31. " GPIO31 ,GPIO31 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " GPIO30 ,GPIO30 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 29. " GPIO29 ,GPIO29 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 28. " GPIO28 ,GPIO28 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 27. " GPIO27 ,GPIO27 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 26. " GPIO26 ,GPIO26 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " GPIO25 ,GPIO25 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 24. " GPIO24 ,GPIO24 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 23. " GPIO23 ,GPIO23 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " GPIO22 ,GPIO22 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " GPIO21 ,GPIO21 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " GPIO20 ,GPIO20 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19. " GPIO19 ,GPIO19 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 18. " GPIO18 ,GPIO18interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " GPIO17 ,GPIO17 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " GPIO16 ,GPIO16 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " GPIO15 ,GPIO15 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " GPIO14 ,GPIO14 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " GPIO13 ,GPIO13 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " GPIO12 ,GPIO12 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11. " GPIO11 ,GPIO11 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " GPIO10 ,GPIO10 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " GPIO9 ,GPIO9 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " GPIO8 ,GPIO8 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " GPIO7 ,GPIO7 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " GPIO6 ,GPIO6 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " GPIO5 ,GPIO5 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " GPIO4 ,GPIO4 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " GPIO3 ,GPIO3 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " GPIO2 ,GPIO2 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " GPIO1 ,GPIO1 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " GPIO0 ,GPIO0 interrupt enable" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INT0STAT,GPIO Interrupt Registers 31-0: Status"
|
|
setclrfld.long 0x00 31. 0x08 31. 0x04 31. " GPIO31 ,GPIO31 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 30. 0x08 30. 0x04 30. " GPIO30 ,GPIO30 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 29. 0x08 29. 0x04 29. " GPIO29 ,GPIO29 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 28. 0x08 28. 0x04 28. " GPIO28 ,GPIO28 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 27. 0x08 27. 0x04 27. " GPIO27 ,GPIO27 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 26. 0x08 26. 0x04 26. " GPIO26 ,GPIO26 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 25. 0x08 25. 0x04 25. " GPIO25 ,GPIO25 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 24. 0x08 24. 0x04 24. " GPIO24 ,GPIO24 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 23. 0x08 23. 0x04 23. " GPIO23 ,GPIO23 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 22. 0x08 22. 0x04 22. " GPIO22 ,GPIO22 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 21. 0x08 21. 0x04 21. " GPIO21 ,GPIO21 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 20. 0x08 20. 0x04 20. " GPIO20 ,GPIO20 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x08 19. 0x04 19. " GPIO19 ,GPIO19 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 18. 0x08 18. 0x04 18. " GPIO18 ,GPIO18interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 17. 0x08 17. 0x04 17. " GPIO17 ,GPIO17 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 16. 0x08 16. 0x04 16. " GPIO16 ,GPIO16 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 15. 0x08 15. 0x04 15. " GPIO15 ,GPIO15 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 14. 0x08 14. 0x04 14. " GPIO14 ,GPIO14 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 13. 0x08 13. 0x04 13. " GPIO13 ,GPIO13 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 12. 0x08 12. 0x04 12. " GPIO12 ,GPIO12 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 11. 0x08 11. 0x04 11. " GPIO11 ,GPIO11 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x04 10. " GPIO10 ,GPIO10 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 9. 0x08 9. 0x04 9. " GPIO9 ,GPIO9 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x04 8. " GPIO8 ,GPIO8 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " GPIO7 ,GPIO7 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " GPIO6 ,GPIO6 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " GPIO5 ,GPIO5 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " GPIO4 ,GPIO4 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " GPIO3 ,GPIO3 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " GPIO2 ,GPIO2 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " GPIO1 ,GPIO1 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " GPIO0 ,GPIO0 interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x210++0x03
|
|
line.long 0x00 "INT1EN,GPIO Interrupt Registers 49-32: Enable"
|
|
bitfld.long 0x00 17. " GPIO49 ,GPIO49 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " GPIO48 ,GPIO48 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 15. " GPIO47 ,GPIO47 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " GPIO46 ,GPIO46 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 13. " GPIO45 ,GPIO45 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " GPIO44 ,GPIO44 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 11. " GPIO43 ,GPIO43 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " GPIO42 ,GPIO42 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 9. " GPIO41 ,GPIO41 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " GPIO40 ,GPIO40 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " GPIO39 ,GPIO39 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " GPIO38 ,GPIO38 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " GPIO37 ,GPIO37 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " GPIO36 ,GPIO36 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " GPIO35 ,GPIO35 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " GPIO34 ,GPIO34 interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " GPIO33 ,GPIO33 interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " GPIO32 ,GPIO32 interrupt enable" "Disabled,Enabled"
|
|
group.long 0x214++0x03
|
|
line.long 0x00 "INT1STAT,GPIO Interrupt Registers 49-32: Status"
|
|
setclrfld.long 0x00 17. 0x08 17. 0x04 17. " GPIO49 ,GPIO49 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 16. 0x08 16. 0x04 16. " GPIO48 ,GPIO48 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 15. 0x08 15. 0x04 15. " GPIO47 ,GPIO47 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 14. 0x08 14. 0x04 14. " GPIO46 ,GPIO46 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x08 13. 0x04 13. " GPIO45 ,GPIO45 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 12. 0x08 12. 0x04 12. " GPIO44 ,GPIO44 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 11. 0x08 11. 0x04 11. " GPIO43 ,GPIO43 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 10. 0x08 10. 0x04 10. " GPIO42 ,GPIO42 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 9. 0x08 9. 0x04 9. " GPIO41 ,GPIO41 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 8. 0x08 8. 0x04 8. " GPIO40 ,GPIO40 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " GPIO39 ,GPIO39 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " GPIO38 ,GPIO38 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " GPIO37 ,GPIO37 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " GPIO36 ,GPIO36 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " GPIO35 ,GPIO35 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " GPIO34 ,GPIO34 interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " GPIO33 ,GPIO33 interrupt status" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " GPIO32 ,GPIO32 interrupt status" "No interrupt,Interrupt"
|
|
width 0xB
|
|
tree.end
|
|
tree "CLKGEN (Clock Generator)"
|
|
base ad:0x40004000
|
|
width 9.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "CALXT,XT Oscillator Control"
|
|
hexmask.long.word 0x00 0.--10. 1. " CALXT ,XT Oscillator calibration value"
|
|
line.long 0x04 "CALRC,RC Oscillator Control"
|
|
hexmask.long.tbyte 0x00 0.--17. 1. " CALRC ,LFRC Oscillator calibration value"
|
|
rgroup.long 0x08++0x03
|
|
line.long 0x00 "ACALCTR,Autocalibration Counter"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " ACALCTR ,Autocalibration Counter result"
|
|
group.long 0x0C++0x07
|
|
line.long 0x00 "OCTRL,Oscillator Control"
|
|
bitfld.long 0x00 8.--10. " ACAL ,Autocalibration control" "Disabled,,1024 s,512 s,,,XT,External"
|
|
bitfld.long 0x00 7. " OSEL ,RTC oscillator" "XT,LFRC"
|
|
bitfld.long 0x00 6. " FOS ,Oscillator switch on failure function" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " STOPRC ,Stop the LFRC Oscillator to the RTC" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 0. " STOPXT ,Stop the XT Oscillator to the RTC" "No,Yes"
|
|
line.long 0x04 "CLKOUT,CLKOUT Frequency Select"
|
|
bitfld.long 0x04 7. " CKEN ,Enable the CLKOUT signal" "Disabled,Enabled"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 0.--5. " CKSEL ,CLKOUT signal select" "LFRC,XT/2,XT/4,XT/8,XT/16,XT/32,,,,,,,,,,,RTC 1Hz,,,,,,XT/2^21,XT,CG 100Hz,HFRC,HFRC/4,HFRC/8,HFRC/16,HFRC/64,HFRC/128,HFRC/256,HFRC/512,,FLASH_CLK,LFRC/2,LFRC/32,LFRC/512,LFRC/32768,XT/256,XT/8192,XT/2^16,ULFRC/16,ULFRC/128,ULFRC 1Hz,ULFRC/4096,ULFRC/2^20,,,LFRC/2^20,,,,XTNE,XTNE/16,LFRCNE/32,,LFRCNE,?..."
|
|
else
|
|
bitfld.long 0x04 0.--5. " CKSEL ,CLKOUT signal select" "LFRC,XT/2,XT/4,XT/8,XT/16,XT/32,,,,,,,,,,,1 Hz,,,,,,XT/2^21,XT,100 Hz,HFRC,HFRC/2,HFRC/4,HFRC/8,HFRC/32,HFRC/64,HFRC/128,HFRC/256,,Flash clock,LFRC/2,LFRC/32,LFRC/512,LFRC/32768,XT/256,XT/8192,XT/2^16,ULFRC/16,ULFRC/128,ULFRC/1024,ULFRC/4096,ULFRC/2^20,HFRC/2^16,HFRC/2^24,LFRC/2^20,HFRCNE,HFRCNE/8,,XTNE,XTNE/16,LFRCNE/32,,LFRCNE,?..."
|
|
endif
|
|
sif (cpu()!="AMAPH1KK")
|
|
group.long 0x14++0x07
|
|
line.long 0x00 "CLKKEY,Key Register for Clock Control Register"
|
|
line.long 0x04 "CCTRL,HFRC Clock Control"
|
|
bitfld.long 0x04 3. " MEMSEL ,Flash Clock divisor" "HFRC/25,HFRC/45"
|
|
bitfld.long 0x04 0.--2. " CORESEL ,Core Clock divisor" "HFRC,HFRC/2,HFRC/3,HFRC/4,HFRC/5,HFRC/6,HFRC/7,HFRC/8"
|
|
endif
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "STATUS,Clock Generator Status"
|
|
bitfld.long 0x00 1. " OSCF ,XT Oscillator is enabled but not oscillating" "No,Yes"
|
|
bitfld.long 0x00 0. " OMODE ,Current RTC oscillator" "XT,LFRC"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "HFADJ,HFRC Adjustment"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 21.--23. " HFADJ_GAIN ,Gain control for HFRC adjustment" "1,1/2,1/4,1/8,1/16,1/32,?..."
|
|
bitfld.long 0x00 20. " HFWARMUP ,XT warmup period for HFRC adjustment" "1 s,2 s"
|
|
hexmask.long.word 0x00 8.--19. 1. " HFXTADJ ,Target HFRC adjustment value"
|
|
else
|
|
bitfld.long 0x00 19. " HFWARMUP ,XT warmup period for HFRC adjustment" "1 s,2 s"
|
|
hexmask.long.word 0x00 8.--18. 1. " HFXTADJ ,Target HFRC adjustment value"
|
|
endif
|
|
textline " "
|
|
bitfld.long 0x00 1.--3. " HFADJCK ,Repeat period for HFRC adjustment" "4 s,16 s,32 s,64 s,128 s,256 s,512 s,1024 s"
|
|
bitfld.long 0x00 0. " HFADJEN ,HFRC adjustment control" "Disabled,Enabled"
|
|
rgroup.long 0x24++0x03
|
|
line.long 0x00 "HFVAL,HFADJ readback"
|
|
hexmask.long.word 0x00 0.--10. 1. " HFTUNERB ,Current HFTUNE value"
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "CLOCKEN,Clock Enable Status"
|
|
sif (cpu()=="AMAPH1KK")
|
|
group.long 0x2C++0x1B
|
|
line.long 0x00 "CLOCKEN2,Clock Enable Status"
|
|
line.long 0x04 "CLOCKEN3,Clock Enable Status"
|
|
line.long 0x08 "UARTEN,UART Enable"
|
|
bitfld.long 0x08 8.--9. " UART1EN ,UART1 system clock control" "Disabled,Enabled,Reduced frequency,Low power"
|
|
bitfld.long 0x08 0.--1. " UART0EN ,UART0 system clock control" "Disabled,Enabled,Reduced frequency,Low power"
|
|
else
|
|
group.long 0x2C++0x03
|
|
line.long 0x00 "UARTEN,UART Enable"
|
|
bitfld.long 0x00 0. " UARTEN ,UART system clock control" "Disabled,Enabled"
|
|
endif
|
|
group.long 0x100++0x03
|
|
line.long 0x00 "INTEN,CLKGEN Interrupt Register: Enable"
|
|
bitfld.long 0x00 3. " ALM ,RTC Alarm interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " OF ,XT Oscillator Fail interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " ACC ,Autocalibration Complete interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " ACF ,Autocalibration Fail interrupt" "Disabled,Enabled"
|
|
group.long 0x104++0x03
|
|
line.long 0x00 "INTSTAT,CLKGEN Interrupt Register: Status"
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " ALM ,RTC Alarm interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " OF ,XT Oscillator Fail interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " ACC ,Autocalibration Complete interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " ACF ,Autocalibration Fail interrupt" "No interrupt,Interrupt"
|
|
width 0xB
|
|
tree.end
|
|
tree "RTC (Real Time Clock)"
|
|
base ad:0x40004000
|
|
width 9.
|
|
if (((per.l(ad:0x40004000+0x50))&0x21)==0x00)
|
|
rgroup.long 0x40++0x03
|
|
line.long 0x00 "CTRLOW,RTC Counters Lower"
|
|
bitfld.long 0x00 24.--29. " CTRHR ,Hours Counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,?..."
|
|
hexmask.long.byte 0x00 16.--22. 1. " CTRMIN ,Minutes Counter"
|
|
hexmask.long.byte 0x00 8.--14. 1. " CTRSEC ,Seconds Counter"
|
|
hexmask.long.byte 0x00 0.--7. 1. " CTR100 ,100ths of a second Counter"
|
|
elif (((per.l(ad:0x40004000+0x50))&0x21)==0x01)
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "CTRLOW,RTC Counters Lower"
|
|
bitfld.long 0x00 24.--29. " CTRHR ,Hours Counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,?..."
|
|
hexmask.long.byte 0x00 16.--22. 1. " CTRMIN ,Minutes Counter"
|
|
hexmask.long.byte 0x00 8.--14. 1. " CTRSEC ,Seconds Counter"
|
|
hexmask.long.byte 0x00 0.--7. 1. " CTR100 ,100ths of a second Counter"
|
|
elif (((per.l(ad:0x40004000+0x50))&0x21)==0x20)
|
|
rgroup.long 0x40++0x03
|
|
line.long 0x00 "CTRLOW,RTC Counters Lower"
|
|
bitfld.long 0x00 29. " AM/PM ,Hours Counter (AM/PM)" "AM,PM"
|
|
bitfld.long 0x00 24.--28. " CTRHR ,Hours Counter (Hour)" ",1,2,3,4,5,6,7,8,9,10,11,12,?..."
|
|
hexmask.long.byte 0x00 16.--22. 1. " CTRMIN ,Minutes Counter"
|
|
hexmask.long.byte 0x00 8.--14. 1. " CTRSEC ,Seconds Counter"
|
|
hexmask.long.byte 0x00 0.--7. 1. " CTR100 ,100ths of a second Counter"
|
|
else
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "CTRLOW,RTC Counters Lower"
|
|
bitfld.long 0x00 29. " AM/PM ,Hours Counter (AM/PM)" "AM,PM"
|
|
bitfld.long 0x00 24.--28. " CTRHR ,Hours Counter (Hour)" ",1,2,3,4,5,6,7,8,9,10,11,12,?..."
|
|
hexmask.long.byte 0x00 16.--22. 1. " CTRMIN ,Minutes Counter"
|
|
hexmask.long.byte 0x00 8.--14. 1. " CTRSEC ,Seconds Counter"
|
|
hexmask.long.byte 0x00 0.--7. 1. " CTR100 ,100ths of a second Counter"
|
|
endif
|
|
hgroup.long 0x44++0x03
|
|
hide.long 0x00 "CTRUP,RTC Counters Upper"
|
|
in
|
|
if (((per.l(ad:0x40004000+0x50))&0x20)==0x00)
|
|
group.long 0x48++0x03
|
|
line.long 0x00 "ALMLOW,RTC Alarms Lower"
|
|
bitfld.long 0x00 24.--29. " ALMHR ,Hours Alarm" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,?..."
|
|
hexmask.long.byte 0x00 16.--22. 1. " ALMMIN ,Minutes Alarm"
|
|
hexmask.long.byte 0x00 8.--14. 1. " ALMSEC ,Seconds Alarm"
|
|
hexmask.long.byte 0x00 0.--7. 1. " ALM100 ,100ths of a second Alarm"
|
|
else
|
|
group.long 0x48++0x03
|
|
line.long 0x00 "ALMLOW,RTC Alarms Lower"
|
|
bitfld.long 0x00 29. " AM/PM ,Hours Alarm (AM/PM)" "AM,PM"
|
|
bitfld.long 0x00 24.--28. " ALMHR ,Hours Alarm" ",1,2,3,4,5,6,7,8,9,10,11,12,?..."
|
|
hexmask.long.byte 0x00 16.--22. 1. " ALMMIN ,Minutes Alarm"
|
|
hexmask.long.byte 0x00 8.--14. 1. " ALMSEC ,Seconds Alarm"
|
|
hexmask.long.byte 0x00 0.--7. 1. " ALM100 ,100ths of a second Alarm"
|
|
endif
|
|
group.long 0x4C++0x07
|
|
line.long 0x00 "ALMUP,RTC Alarms Upper"
|
|
bitfld.long 0x00 16.--18. " ALMWKDY ,Weekdays Alarm" "0,1,2,3,4,5,6,"
|
|
bitfld.long 0x00 8.--12. " ALMMO ,Months Alarm" "0,1,2,3,4,5,6,7,8,9,10,11,12,?..."
|
|
bitfld.long 0x00 0.--5. " ALMDATE ,Date Alarm" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,?..."
|
|
line.long 0x04 "RTCCTL,RTC Control Register"
|
|
bitfld.long 0x04 5. " HR1224 ,Hours Counter mode" "24 h,12 h"
|
|
bitfld.long 0x04 4. " RSTOP ,RTC input clock control" "Running,Stopped"
|
|
bitfld.long 0x04 1.--3. " RPT ,Alarm repeat interval" "Disabled,Year,Month,Week,Day,Hour,Minute,Second"
|
|
bitfld.long 0x04 0. " WRTC ,Counter write control" "Writes disabled,Writes enabled"
|
|
group.long 0x100++0x03
|
|
line.long 0x00 "INTEN,CLKGEN Interrupt Register: Enable"
|
|
bitfld.long 0x00 3. " ALM ,RTC Alarm interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " OF ,XT Oscillator Fail interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " ACC ,Autocalibration Complete interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " ACF ,Autocalibration Fail interrupt" "Disabled,Enabled"
|
|
group.long 0x104++0x03
|
|
line.long 0x00 "INTSTAT,CLKGEN Interrupt Register: Status"
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " ALM ,RTC Alarm interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " OF ,XT Oscillator Fail interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " ACC ,Autocalibration Complete interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " ACF ,Autocalibration Fail interrupt" "No interrupt,Interrupt"
|
|
width 0xB
|
|
tree.end
|
|
tree "CTIMER (Counter/Timer)"
|
|
base ad:0x40008000
|
|
width 9.
|
|
if (((per.l(ad:0x40008000+0x0C+0x0))&0x80000000)==0x00000000)
|
|
rgroup.long (0x00+0x0)++0x03
|
|
line.long 0x00 "TMR0,Counter/Timer Register 0"
|
|
hexmask.long.word 0x00 16.--31. 1. " CTTMRB0 ,Counter/Timer B0"
|
|
hexmask.long.word 0x00 0.--15. 1. " CTTMRA0 ,Counter/Timer A0"
|
|
else
|
|
rgroup.long (0x00+0x0)++0x03
|
|
line.long 0x00 "TMR0,Counter/Timer Register 0"
|
|
endif
|
|
group.long (0x04+0x0)++0x07
|
|
line.long 0x00 "CMPRA0,Counter/Timer A0 Compare Registers"
|
|
hexmask.long.word 0x00 16.--31. 1. " CMPR1A0 ,Counter/Timer A0 Compare Register 1"
|
|
hexmask.long.word 0x00 0.--15. 1. " CMPR0A0 ,Counter/Timer A0 Compare Register 0"
|
|
line.long 0x04 "CMPRB0,Counter/Timer B0 Compare Registers"
|
|
hexmask.long.word 0x04 16.--31. 1. " CMPR1B0 ,Counter/Timer B0 Compare Register 1"
|
|
hexmask.long.word 0x04 0.--15. 1. " CMPR0B0 ,Counter/Timer B0 Compare Register 0"
|
|
if (((per.l(ad:0x40008000+0x0C+0x0))&0x80000000)==0x00000000)
|
|
group.long (0x0C+0x0)++0x03
|
|
line.long 0x00 "CTRL0,Counter/Timer Control 0"
|
|
bitfld.long 0x00 31. " CTLINK0 ,Counter/Timer A0/B0 Link" "16 bit,32 bit"
|
|
textline " "
|
|
bitfld.long 0x00 28. " TMRB0POL ,Counter/Timer B0 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 27. " TMRB0CLR ,Counter/Timer B0 Clear" "Run,Clear"
|
|
bitfld.long 0x00 26. " TMRB0PE ,Counter/Timer B0 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " TMRB0IE ,Counter/Timer B0 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 22.--24. " TMRB0FN ,Counter/Timer B0 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 17.--21. " TMRB0CLK ,Counter/Timer B0 Clock Select" "TMRPINB,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKB,?..."
|
|
bitfld.long 0x00 16. " TMRB0EN ,Counter/Timer B0 Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 12. " TMRA0POL ,Counter/Timer A0 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 11. " TMRA0CLR ,Counter/Timer A0 Clear" "Run,Clear"
|
|
bitfld.long 0x00 10. " TMRA0PE ,Counter/Timer A0 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " TMRA0IE ,Counter/Timer A0 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6.--8. " TMRA0FN ,Counter/Timer A0 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 1.--5. " TMRA0CLK ,Counter/Timer A0 Clock Select" "TMRPINA,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKA,?..."
|
|
bitfld.long 0x00 0. " TMRA0EN ,Counter/Timer A0 Enable" "Disabled,Enabled"
|
|
else
|
|
group.long (0x0C+0x0)++0x03
|
|
line.long 0x00 "CTRL0,Counter/Timer Control 0"
|
|
bitfld.long 0x00 31. " CTLINK0 ,Counter/Timer A0/B0 Link" "16 bit,32"
|
|
textline " "
|
|
bitfld.long 0x00 12. " TMRA0POL ,Counter/Timer A0 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 11. " TMRA0CLR ,Counter/Timer A0 Clear" "Run,Clear"
|
|
bitfld.long 0x00 10. " TMRA0PE ,Counter/Timer A0 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " TMRA0IE ,Counter/Timer A0 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6.--8. " TMRA0FN ,Counter/Timer A0 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 1.--5. " TMRA0CLK ,Counter/Timer A0 Clock Select" "TMRPINA,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKA,?..."
|
|
bitfld.long 0x00 0. " TMRA0EN ,Counter/Timer A0 Enable" "Disabled,Enabled"
|
|
endif
|
|
textline " "
|
|
if (((per.l(ad:0x40008000+0x0C+0x10))&0x80000000)==0x00000000)
|
|
rgroup.long (0x00+0x10)++0x03
|
|
line.long 0x00 "TMR1,Counter/Timer Register 1"
|
|
hexmask.long.word 0x00 16.--31. 1. " CTTMRB1 ,Counter/Timer B1"
|
|
hexmask.long.word 0x00 0.--15. 1. " CTTMRA1 ,Counter/Timer A1"
|
|
else
|
|
rgroup.long (0x00+0x10)++0x03
|
|
line.long 0x00 "TMR1,Counter/Timer Register 1"
|
|
endif
|
|
group.long (0x04+0x10)++0x07
|
|
line.long 0x00 "CMPRA1,Counter/Timer A1 Compare Registers"
|
|
hexmask.long.word 0x00 16.--31. 1. " CMPR1A1 ,Counter/Timer A1 Compare Register 1"
|
|
hexmask.long.word 0x00 0.--15. 1. " CMPR0A1 ,Counter/Timer A1 Compare Register 0"
|
|
line.long 0x04 "CMPRB1,Counter/Timer B1 Compare Registers"
|
|
hexmask.long.word 0x04 16.--31. 1. " CMPR1B1 ,Counter/Timer B1 Compare Register 1"
|
|
hexmask.long.word 0x04 0.--15. 1. " CMPR0B1 ,Counter/Timer B1 Compare Register 0"
|
|
if (((per.l(ad:0x40008000+0x0C+0x10))&0x80000000)==0x00000000)
|
|
group.long (0x0C+0x10)++0x03
|
|
line.long 0x00 "CTRL1,Counter/Timer Control 1"
|
|
bitfld.long 0x00 31. " CTLINK1 ,Counter/Timer A1/B1 Link" "16 bit,32 bit"
|
|
textline " "
|
|
bitfld.long 0x00 28. " TMRB1POL ,Counter/Timer B1 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 27. " TMRB1CLR ,Counter/Timer B1 Clear" "Run,Clear"
|
|
bitfld.long 0x00 26. " TMRB1PE ,Counter/Timer B1 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " TMRB1IE ,Counter/Timer B1 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 22.--24. " TMRB1FN ,Counter/Timer B1 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 17.--21. " TMRB1CLK ,Counter/Timer B1 Clock Select" "TMRPINB,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKB,?..."
|
|
bitfld.long 0x00 16. " TMRB1EN ,Counter/Timer B1 Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 12. " TMRA1POL ,Counter/Timer A1 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 11. " TMRA1CLR ,Counter/Timer A1 Clear" "Run,Clear"
|
|
bitfld.long 0x00 10. " TMRA1PE ,Counter/Timer A1 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " TMRA1IE ,Counter/Timer A1 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6.--8. " TMRA1FN ,Counter/Timer A1 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 1.--5. " TMRA1CLK ,Counter/Timer A1 Clock Select" "TMRPINA,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKA,?..."
|
|
bitfld.long 0x00 0. " TMRA1EN ,Counter/Timer A1 Enable" "Disabled,Enabled"
|
|
else
|
|
group.long (0x0C+0x10)++0x03
|
|
line.long 0x00 "CTRL1,Counter/Timer Control 1"
|
|
bitfld.long 0x00 31. " CTLINK1 ,Counter/Timer A1/B1 Link" "16 bit,32"
|
|
textline " "
|
|
bitfld.long 0x00 12. " TMRA1POL ,Counter/Timer A1 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 11. " TMRA1CLR ,Counter/Timer A1 Clear" "Run,Clear"
|
|
bitfld.long 0x00 10. " TMRA1PE ,Counter/Timer A1 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " TMRA1IE ,Counter/Timer A1 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6.--8. " TMRA1FN ,Counter/Timer A1 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 1.--5. " TMRA1CLK ,Counter/Timer A1 Clock Select" "TMRPINA,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKA,?..."
|
|
bitfld.long 0x00 0. " TMRA1EN ,Counter/Timer A1 Enable" "Disabled,Enabled"
|
|
endif
|
|
textline " "
|
|
if (((per.l(ad:0x40008000+0x0C+0x20))&0x80000000)==0x00000000)
|
|
rgroup.long (0x00+0x20)++0x03
|
|
line.long 0x00 "TMR2,Counter/Timer Register 2"
|
|
hexmask.long.word 0x00 16.--31. 1. " CTTMRB2 ,Counter/Timer B2"
|
|
hexmask.long.word 0x00 0.--15. 1. " CTTMRA2 ,Counter/Timer A2"
|
|
else
|
|
rgroup.long (0x00+0x20)++0x03
|
|
line.long 0x00 "TMR2,Counter/Timer Register 2"
|
|
endif
|
|
group.long (0x04+0x20)++0x07
|
|
line.long 0x00 "CMPRA2,Counter/Timer A2 Compare Registers"
|
|
hexmask.long.word 0x00 16.--31. 1. " CMPR1A2 ,Counter/Timer A2 Compare Register 1"
|
|
hexmask.long.word 0x00 0.--15. 1. " CMPR0A2 ,Counter/Timer A2 Compare Register 0"
|
|
line.long 0x04 "CMPRB2,Counter/Timer B2 Compare Registers"
|
|
hexmask.long.word 0x04 16.--31. 1. " CMPR1B2 ,Counter/Timer B2 Compare Register 1"
|
|
hexmask.long.word 0x04 0.--15. 1. " CMPR0B2 ,Counter/Timer B2 Compare Register 0"
|
|
if (((per.l(ad:0x40008000+0x0C+0x20))&0x80000000)==0x00000000)
|
|
group.long (0x0C+0x20)++0x03
|
|
line.long 0x00 "CTRL2,Counter/Timer Control 2"
|
|
bitfld.long 0x00 31. " CTLINK2 ,Counter/Timer A2/B2 Link" "16 bit,32 bit"
|
|
textline " "
|
|
bitfld.long 0x00 28. " TMRB2POL ,Counter/Timer B2 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 27. " TMRB2CLR ,Counter/Timer B2 Clear" "Run,Clear"
|
|
bitfld.long 0x00 26. " TMRB2PE ,Counter/Timer B2 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " TMRB2IE ,Counter/Timer B2 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 22.--24. " TMRB2FN ,Counter/Timer B2 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 17.--21. " TMRB2CLK ,Counter/Timer B2 Clock Select" "TMRPINB,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKB,?..."
|
|
bitfld.long 0x00 16. " TMRB2EN ,Counter/Timer B2 Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 12. " TMRA2POL ,Counter/Timer A2 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 11. " TMRA2CLR ,Counter/Timer A2 Clear" "Run,Clear"
|
|
bitfld.long 0x00 10. " TMRA2PE ,Counter/Timer A2 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " TMRA2IE ,Counter/Timer A2 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6.--8. " TMRA2FN ,Counter/Timer A2 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 1.--5. " TMRA2CLK ,Counter/Timer A2 Clock Select" "TMRPINA,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKA,?..."
|
|
bitfld.long 0x00 0. " TMRA2EN ,Counter/Timer A2 Enable" "Disabled,Enabled"
|
|
else
|
|
group.long (0x0C+0x20)++0x03
|
|
line.long 0x00 "CTRL2,Counter/Timer Control 2"
|
|
bitfld.long 0x00 31. " CTLINK2 ,Counter/Timer A2/B2 Link" "16 bit,32"
|
|
textline " "
|
|
bitfld.long 0x00 12. " TMRA2POL ,Counter/Timer A2 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 11. " TMRA2CLR ,Counter/Timer A2 Clear" "Run,Clear"
|
|
bitfld.long 0x00 10. " TMRA2PE ,Counter/Timer A2 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " TMRA2IE ,Counter/Timer A2 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6.--8. " TMRA2FN ,Counter/Timer A2 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 1.--5. " TMRA2CLK ,Counter/Timer A2 Clock Select" "TMRPINA,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKA,?..."
|
|
bitfld.long 0x00 0. " TMRA2EN ,Counter/Timer A2 Enable" "Disabled,Enabled"
|
|
endif
|
|
textline " "
|
|
if (((per.l(ad:0x40008000+0x0C+0x30))&0x80000000)==0x00000000)
|
|
rgroup.long (0x00+0x30)++0x03
|
|
line.long 0x00 "TMR3,Counter/Timer Register 3"
|
|
hexmask.long.word 0x00 16.--31. 1. " CTTMRB3 ,Counter/Timer B3"
|
|
hexmask.long.word 0x00 0.--15. 1. " CTTMRA3 ,Counter/Timer A3"
|
|
else
|
|
rgroup.long (0x00+0x30)++0x03
|
|
line.long 0x00 "TMR3,Counter/Timer Register 3"
|
|
endif
|
|
group.long (0x04+0x30)++0x07
|
|
line.long 0x00 "CMPRA3,Counter/Timer A3 Compare Registers"
|
|
hexmask.long.word 0x00 16.--31. 1. " CMPR1A3 ,Counter/Timer A3 Compare Register 1"
|
|
hexmask.long.word 0x00 0.--15. 1. " CMPR0A3 ,Counter/Timer A3 Compare Register 0"
|
|
line.long 0x04 "CMPRB3,Counter/Timer B3 Compare Registers"
|
|
hexmask.long.word 0x04 16.--31. 1. " CMPR1B3 ,Counter/Timer B3 Compare Register 1"
|
|
hexmask.long.word 0x04 0.--15. 1. " CMPR0B3 ,Counter/Timer B3 Compare Register 0"
|
|
if (((per.l(ad:0x40008000+0x0C+0x30))&0x80000000)==0x00000000)
|
|
group.long (0x0C+0x30)++0x03
|
|
line.long 0x00 "CTRL3,Counter/Timer Control 3"
|
|
bitfld.long 0x00 31. " CTLINK3 ,Counter/Timer A3/B3 Link" "16 bit,32 bit"
|
|
textline " "
|
|
bitfld.long 0x00 28. " TMRB3POL ,Counter/Timer B3 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 27. " TMRB3CLR ,Counter/Timer B3 Clear" "Run,Clear"
|
|
bitfld.long 0x00 26. " TMRB3PE ,Counter/Timer B3 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " TMRB3IE ,Counter/Timer B3 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 22.--24. " TMRB3FN ,Counter/Timer B3 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 17.--21. " TMRB3CLK ,Counter/Timer B3 Clock Select" "TMRPINB,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKB,?..."
|
|
bitfld.long 0x00 16. " TMRB3EN ,Counter/Timer B3 Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 12. " TMRA3POL ,Counter/Timer A3 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 11. " TMRA3CLR ,Counter/Timer A3 Clear" "Run,Clear"
|
|
bitfld.long 0x00 10. " TMRA3PE ,Counter/Timer A3 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " TMRA3IE ,Counter/Timer A3 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6.--8. " TMRA3FN ,Counter/Timer A3 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 1.--5. " TMRA3CLK ,Counter/Timer A3 Clock Select" "TMRPINA,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKA,?..."
|
|
bitfld.long 0x00 0. " TMRA3EN ,Counter/Timer A3 Enable" "Disabled,Enabled"
|
|
else
|
|
group.long (0x0C+0x30)++0x03
|
|
line.long 0x00 "CTRL3,Counter/Timer Control 3"
|
|
bitfld.long 0x00 31. " CTLINK3 ,Counter/Timer A3/B3 Link" "16 bit,32"
|
|
textline " "
|
|
bitfld.long 0x00 12. " TMRA3POL ,Counter/Timer A3 output polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 11. " TMRA3CLR ,Counter/Timer A3 Clear" "Run,Clear"
|
|
bitfld.long 0x00 10. " TMRA3PE ,Counter/Timer A3 Output Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " TMRA3IE ,Counter/Timer A3 Interrupt Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6.--8. " TMRA3FN ,Counter/Timer A3 Function Select" "Single count,Repeated count,Pulse once,Pulse continously,Continuous run,?..."
|
|
bitfld.long 0x00 1.--5. " TMRA3CLK ,Counter/Timer A3 Clock Select" "TMRPINA,HFRC,HFRC/8,HFRC/128,HFRC/512,HFRC/2048,XT,XT/2,XT/16,XT/256,LFRC/2,LFRC/32,LFRC/1024,LFRC/16K,RTC 100Hz,HCLK,BUCKA,?..."
|
|
bitfld.long 0x00 0. " TMRA3EN ,Counter/Timer A3 Enable" "Disabled,Enabled"
|
|
endif
|
|
textline " "
|
|
if (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x00000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x80000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x00000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x80000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x00000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x80000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x00000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x80000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " CTMRB0INT ,Counter/Timer B0 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x00000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x80000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x00000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x80000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " CTMRB1INT ,Counter/Timer B1 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x00000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x00000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x80000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " CTMRB2INT ,Counter/Timer B2 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
elif (((per.l(ad:0x40008000+0x0C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x1C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x2C))&0x80000000)==0x80000000)&&(((per.l(ad:0x40008000+0x3C))&0x80000000)==0x00000000)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 7. 0x08 7. 0x04 7. " CTMRB3INT ,Counter/Timer B3 interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
else
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Counter/Timer Interrupts: Enable"
|
|
bitfld.long 0x00 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Counter/Timer Interrupts: Status"
|
|
setclrfld.long 0x00 6. 0x08 6. 0x04 6. " CTMRA3INT ,Counter/Timer A3 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " CTMRA2INT ,Counter/Timer A2 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " CTMRA1INT ,Counter/Timer A1 interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CTMRA0INT ,Counter/Timer A0 interrupt" "No interrupt,Interrupt"
|
|
endif
|
|
width 0xB
|
|
tree.end
|
|
tree "WDT (Watchdog Timer)"
|
|
base ad:0x40024000
|
|
width 9.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 24.--26. " CLKSEL ,Frequency for the WDT" "Off,128 Hz,16 Hz,1 Hz,1/16th Hz,?..."
|
|
textline " "
|
|
endif
|
|
hexmask.long.byte 0x00 16.--23. 1. " INTVAL ,Compare value to generate a watchdog interrupt"
|
|
hexmask.long.byte 0x00 8.--15. 1. " RESVAL ,Compare value to generate a watchdog reset"
|
|
bitfld.long 0x00 2. " RESEN ,Enable the WDT reset" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " INTEN ,Enable the WDT interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " WDTEN ,Enable the WDT" "Disabled,Enabled"
|
|
wgroup.long 0x04++0x07
|
|
line.long 0x00 "RSTRT,Restart the watchdog timer"
|
|
hexmask.long.byte 0x00 0.--7. 1. " RSTRT ,Restart the watchdog timer (write 0xB2)"
|
|
line.long 0x04 "LOCK,Locks the WDT"
|
|
hexmask.long.byte 0x04 0.--7. 1. " LOCK ,Lock the watchdog timer (write 0x3A)"
|
|
sif (cpu()=="AMAPH1KK")
|
|
rgroup.long 0x0C++0x03
|
|
line.long 0x00 "COUNT,Current Counter Value for WDT"
|
|
hexmask.long.byte 0x00 0.--7. 1. " COUNT ,Read-Only current value of the WDT counter"
|
|
endif
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,WDT Interrupt register: Enable"
|
|
bitfld.long 0x00 0. " WDT ,Watchdog Timer Interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,WDT Interrupt register: Status"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " WDT ,Watchdog Timer Interrupt" "No interrupt,Interrupt"
|
|
width 0xB
|
|
tree.end
|
|
tree "RSTGEN (MCU Reset Generator)"
|
|
base ad:0x40000000
|
|
width 10.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register"
|
|
bitfld.long 0x00 1. " WDREN ,Watchdog Timer Reset Enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " BODHREN ,Brown out high (2.1v) reset enable" "Disabled,Enabled"
|
|
wgroup.long 0x04++0x07
|
|
line.long 0x00 "SWPOI,Software POI Reset"
|
|
hexmask.long.byte 0x00 0.--7. 1. " SWPOIKEY ,0x1B generates a software POI reset"
|
|
line.long 0x04 "SWPOR,Software POR Reset"
|
|
hexmask.long.byte 0x04 0.--7. 1. " SWPORKEY ,0xD4 generates a software POR reset"
|
|
rgroup.long 0x0C++0x03
|
|
line.long 0x00 "STAT,Status Register"
|
|
bitfld.long 0x00 6. " WDRSTAT ,Reset was initiated by a Watchdog Timer Reset" "No reset,Reset"
|
|
bitfld.long 0x00 5. " DBGRSTAT ,Reset was a initiated by Debugger Reset" "No reset,Reset"
|
|
bitfld.long 0x00 4. " POIRSTAT ,Reset was a initiated by Software POI Reset" "No reset,Reset"
|
|
bitfld.long 0x00 3. " SWRSTAT ,Reset was a initiated by SW POR or AIRCR Reset" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x00 2. " BORSTAT ,Reset was initiated by a Brown-Out Reset" "No reset,Reset"
|
|
bitfld.long 0x00 1. " PORSTAT ,Reset was initiated by a Power-On Reset" "No reset,Reset"
|
|
bitfld.long 0x00 0. " EXRSTAT ,Reset was initiated by an External Reset" "No reset,Reset"
|
|
wgroup.long 0x10++0x03
|
|
line.long 0x00 "CLRSTAT,Clear the status register"
|
|
bitfld.long 0x00 0. " CLRSTAT ,Clear all bits in the STAT register" "No effect,Clear"
|
|
sif (cpu()=="AMAPH1KK")
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "TPIU_RST,TPIU reset"
|
|
bitfld.long 0x00 0. " TPIURST ,Static reset for the TPIU" "No reset,Reset"
|
|
endif
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Reset Interrupt register: Enable"
|
|
bitfld.long 0x00 0. " BODH ,Enables an interrupt that triggers when VCC is below BODH level" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Reset Interrupt register: Status"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " BODH ,Interrupt that triggers when VCC is below BODH level" "No interrupt,Interrupt"
|
|
width 0xB
|
|
tree.end
|
|
tree "UART (Serial UART)"
|
|
base ad:0x4001C000
|
|
width 6.
|
|
hgroup.long 0x00++0x03
|
|
hide.long 0x00 "DR,UART Data Register"
|
|
in
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "RSR,UART Status Register"
|
|
bitfld.long 0x00 3. " OESTAT ,Overrun error" "No error,Error"
|
|
bitfld.long 0x00 2. " BESTAT ,Break error" "No error,Error"
|
|
bitfld.long 0x00 1. " PESTAT ,Parity error" "No error,Error"
|
|
bitfld.long 0x00 0. " FESTAT ,Framing error" "No error,Error"
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FR,Flag Register"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 8. " TXBUSY ,Transmit BUSY indicator" "Idle,Busy"
|
|
bitfld.long 0x00 7. " TXFE ,Transmit FIFO empty" "Not empty,Empty"
|
|
else
|
|
bitfld.long 0x00 8. " RI ,The ring indicator" "No,Yes"
|
|
bitfld.long 0x00 7. " TXFE ,Transmit FIFO empty" "Not empty,Empty"
|
|
endif
|
|
bitfld.long 0x00 6. " RXFF ,Receive FIFO full" "Not full,Full"
|
|
bitfld.long 0x00 5. " TXFF ,Transmit FIFO full" "Not full,Full"
|
|
textline " "
|
|
bitfld.long 0x00 4. " RXFE ,Receive FIFO empty indicator" "Not empty,Empty"
|
|
bitfld.long 0x00 3. " BUSY ,Busy" "Idle,Busy"
|
|
bitfld.long 0x00 2. " DCD ,Data carrier detect" "Not detected,Detected"
|
|
bitfld.long 0x00 1. " DSR ,Data set ready" "Not ready,Ready"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CTS ,Clear to send" "No,Yes"
|
|
group.long 0x20++0x1B
|
|
line.long 0x00 "ILPR,IrDA Counter"
|
|
hexmask.long.byte 0x00 0.--7. 1. " ILPDVSR ,IrDA counter divisor"
|
|
line.long 0x04 "IBRD,Integer Baud Rate Divisor"
|
|
hexmask.long.word 0x04 0.--15. 1. " DIVINT ,Baud integer divisor"
|
|
line.long 0x08 "FBRD,Fractional Baud Rate Divisor"
|
|
bitfld.long 0x08 0.--5. " DIVFRAC ,Baud fractional divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x0C "LCRH,Line Control High"
|
|
bitfld.long 0x0C 7. " SPS ,Stick parity select" "No,Yes"
|
|
bitfld.long 0x0C 5.--6. " WLEN ,These bits hold the write length" "0,1,2,3"
|
|
bitfld.long 0x0C 4. " FEN ,FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 3. " STP2 ,Two stop bits select" "1-bit,2-bits"
|
|
textline " "
|
|
bitfld.long 0x0C 2. " EPS ,Even parity select" "Odd,Even"
|
|
bitfld.long 0x0C 1. " PEN ,Parity enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " BRK ,Break set" "Not set,Set"
|
|
line.long 0x10 "CR,Control Register"
|
|
bitfld.long 0x10 15. " CTSEN ,Enable CTS hardware flow control" "Disabled,Enabled"
|
|
bitfld.long 0x10 14. " RTSEN ,Enable RTS hardware flow control" "Disabled,Enabled"
|
|
bitfld.long 0x10 13. " OUT2 ,Modem Out2" "0,1"
|
|
bitfld.long 0x10 12. " OUT1 ,Modem Out1" "0,1"
|
|
textline " "
|
|
bitfld.long 0x10 11. " RTS ,Enable request to send" "Disabled,Enabled"
|
|
bitfld.long 0x10 10. " DTR ,Enable data transmit ready" "Disabled,Enabled"
|
|
bitfld.long 0x10 9. " RXE ,Receive enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 8. " TXE ,Transmit enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 7. " LBE ,Loopback enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 4.--6. " CLKSEL ,UART clock select" "No clock,24 MHz,12 MHz,6 MHz,3 MHz,?..."
|
|
bitfld.long 0x10 3. " CLKEN ,UART clock enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 2. " SIRLP ,SIR low power select" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 1. " SIREN ,SIR ENDEC enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 0. " UARTEN ,UART enable" "Disabled,Enabled"
|
|
line.long 0x14 "IFLS,FIFO Interrupt Level Select"
|
|
bitfld.long 0x14 3.--5. " RXIFLSEL ,These bits hold the receive FIFO interrupt level" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x14 0.--2. " TXIFLSEL ,These bits hold the transmit FIFO interrupt level" "0,1,2,3,4,5,6,7"
|
|
line.long 0x18 "IER,Interrupt Enable"
|
|
bitfld.long 0x18 10. " OEIM ,Overflow interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 9. " BEIM ,Break error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 8. " PEIM ,Parity error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 7. " FEIM ,Framing error interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 6. " RTIM ,Receive timeout interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 5. " TXIM ,Transmit interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 4. " RXIM ,Receive interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 3. " DSRMIM ,Modem DSR interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 2. " DCDMIM ,Modem DCD interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 1. " CTSMIM ,Modem CTS interrupt enable" "Disabled,Enabled"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 0. " TXCMPMIM ,Modem TXCMP interrupt enable" "Disabled,Enabled"
|
|
else
|
|
bitfld.long 0x18 0. " RIMIM ,Modem RI interrupt enable" "Disabled,Enabled"
|
|
endif
|
|
rgroup.long 0x3C++0x07
|
|
line.long 0x00 "IES,Interrupt Status"
|
|
bitfld.long 0x00 10. " OERIS ,Overflow interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 9. " BERIS ,Break error interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 8. " PERIS ,Parity error interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 7. " FERIS ,Framing error interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
bitfld.long 0x00 6. " RTRIS ,Receive timeout interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 5. " TXRIS ,Transmit interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 4. " RXRIS ,Receive interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 3. " DSRMRIS ,Modem DSR interrupt status" "No interrupt,Interrupt"
|
|
textline " "
|
|
bitfld.long 0x00 2. " DCDMRIS ,Modem DCD interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 1. " CTSMRIS ,Modem CTS interrupt status" "No interrupt,Interrupt"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 0. " TXCMPMRIS ,Modem TXCMP interrupt status" "No interrupt,Interrupt"
|
|
else
|
|
bitfld.long 0x00 0. " RIMRIS ,Modem RI interrupt status" "No interrupt,Interrupt"
|
|
endif
|
|
line.long 0x04 "MIS,Masked Interrupt Status"
|
|
bitfld.long 0x04 10. " OEMIS ,Overflow interrupt status masked" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 9. " BEMIS ,Break error interrupt status masked" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 8. " PEMIS ,Parity error interrupt status masked" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 7. " FEMIS ,Framing error interrupt status masked" "No interrupt,Interrupt"
|
|
textline " "
|
|
bitfld.long 0x04 6. " RTMIS ,Receive timeout interrupt status masked" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " TXMIS ,Transmit interrupt status masked" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " RXMIS ,Receive interrupt status masked" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 3. " DSRMMIS ,Modem DSR interrupt status masked" "No interrupt,Interrupt"
|
|
textline " "
|
|
bitfld.long 0x04 2. " DCDMMIS ,Modem DCD interrupt status masked" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 1. " CTSMMIS ,Modem CTS interrupt status masked" "No interrupt,Interrupt"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 0. " TXCMPMMIS ,Modem TXCMP interrupt status masked" "No interrupt,Interrupt"
|
|
else
|
|
bitfld.long 0x04 0. " RIMMIS ,Modem RI interrupt status masked" "No interrupt,Interrupt"
|
|
endif
|
|
wgroup.long 0x44++0x03
|
|
line.long 0x00 "IEC,Interrupt Clear"
|
|
bitfld.long 0x00 10. " OEIC ,Overflow interrupt clear" "No effect,Clear"
|
|
bitfld.long 0x00 9. " BEIC ,Break error interrupt clear" "No effect,Clear"
|
|
bitfld.long 0x00 8. " PEIC ,Parity error interrupt clear" "No effect,Clear"
|
|
bitfld.long 0x00 7. " FEIC ,Framing error interrupt clear" "No effect,Clear"
|
|
textline " "
|
|
bitfld.long 0x00 6. " RTIC ,Receive timeout interrupt clear" "No effect,Clear"
|
|
bitfld.long 0x00 5. " TXIC ,Transmit interrupt clear" "No effect,Clear"
|
|
bitfld.long 0x00 4. " RXIC ,Receive interrupt clear" "No effect,Clear"
|
|
bitfld.long 0x00 3. " DSRMIC ,Modem DSR interrupt clear" "No effect,Clear"
|
|
textline " "
|
|
bitfld.long 0x00 2. " DCDMIC ,Modem DCD interrupt clear" "No effect,Clear"
|
|
bitfld.long 0x00 1. " CTSMIC ,Modem CTS interrupt clear" "No effect,Clear"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 0. " TXCMPMIC ,Modem TXCMP interrupt clear" "No effect,Clear"
|
|
else
|
|
bitfld.long 0x00 0. " RIMIC ,Modem RI interrupt clear" "No effect,Clear"
|
|
endif
|
|
width 0xB
|
|
tree.end
|
|
tree "ADC (Analog to Digital Converter)"
|
|
base ad:0x50008000
|
|
width 9.
|
|
if (((per.long(ad:0x50008000))&0x01)==0x01)
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register"
|
|
rbitfld.long 0x00 24.--26. " CLKSEL ,Select the source and frequency for the ADC clock" "Low power,12 MHz,6 MHz,3 MHz,1.5 MHz,?..."
|
|
rbitfld.long 0x00 20. " TRIGPOL ,ADC trigger polarity for external off chip triggers" "Rising edge,Falling edge"
|
|
rbitfld.long 0x00 16.--19. " TRIGSEL ,ADC trigger source" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,SWT,?..."
|
|
textline " "
|
|
rbitfld.long 0x00 8.--9. " REFSEL ,ADC reference voltage" "INTERNAL,VDD,ADCREF,?..."
|
|
rbitfld.long 0x00 7. " BATTLOAD ,Control 400 Ohm battery load resistor" "Enabled,Disabled"
|
|
rbitfld.long 0x00 5.--6. " OPMODE ,Sample rate mode" "<= 125K sps,,125K to 1M sps,?..."
|
|
textline " "
|
|
rbitfld.long 0x00 3.--4. " LPMODE ,Select power mode to enter between active scans" "Mode 0,Mode 1,Mode 2,?..."
|
|
rbitfld.long 0x00 2. " RPTEN ,Repeating Scan Mode" "Single,Repeating"
|
|
rbitfld.long 0x00 1. " TMPSPWR ,Enable power to the temperature sensor module" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " ADCEN ,ADC module enable" "Disabled,Enabled"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register"
|
|
bitfld.long 0x00 24.--26. " CLKSEL ,Select the source and frequency for the ADC clock" "Low power,12 MHz,6 MHz,3 MHz,1.5 MHz,?..."
|
|
bitfld.long 0x00 20. " TRIGPOL ,ADC trigger polarity for external off chip triggers" "Rising edge,Falling edge"
|
|
bitfld.long 0x00 16.--19. " TRIGSEL ,ADC trigger source" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,SWT,?..."
|
|
textline " "
|
|
bitfld.long 0x00 8.--9. " REFSEL ,ADC reference voltage" "INTERNAL,VDD,ADCREF,?..."
|
|
bitfld.long 0x00 7. " BATTLOAD ,Control 400 Ohm battery load resistor" "Enabled,Disabled"
|
|
bitfld.long 0x00 5.--6. " OPMODE ,Sample rate mode" "<= 125K sps,,125K to 1M sps,?..."
|
|
textline " "
|
|
bitfld.long 0x00 3.--4. " LPMODE ,Select power mode to enter between active scans" "Mode 0,Mode 1,Mode 2,?..."
|
|
bitfld.long 0x00 2. " RPTEN ,Repeating Scan Mode" "Single,Repeating"
|
|
bitfld.long 0x00 1. " TMPSPWR ,Enable power to the temperature sensor module" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " ADCEN ,ADC module enable" "Disabled,Enabled"
|
|
endif
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "STAT,ADC Power Status Register"
|
|
bitfld.long 0x00 0.--1. " PWDSTAT ,Power-status of ADC" "Powered on,Low power mode 1,Powered off,?..."
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "SWT,Software Trigger Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " SWT ,Software trigger = 0x37"
|
|
if (((per.long(ad:0x50008000))&0x01)==0x00)
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "SL0CFG,Slot 0 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL0 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL0 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL0 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN0 ,Enable the window compare function for slot 0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN0 ,Enable slot 0 for ADC conversions" "Disabled,Enabled"
|
|
else
|
|
rgroup.long 0xC++0x03
|
|
line.long 0x00 "SL0CFG,Slot 0 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL0 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL0 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL0 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN0 ,Enable the window compare function for slot 0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN0 ,Enable slot 0 for ADC conversions" "Disabled,Enabled"
|
|
endif
|
|
if (((per.long(ad:0x50008000))&0x01)==0x00)
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "SL1CFG,Slot 1 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL1 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL1 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL1 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN1 ,Enable the window compare function for slot 1" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN1 ,Enable slot 1 for ADC conversions" "Disabled,Enabled"
|
|
else
|
|
rgroup.long 0x10++0x03
|
|
line.long 0x00 "SL1CFG,Slot 1 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL1 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL1 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL1 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN1 ,Enable the window compare function for slot 1" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN1 ,Enable slot 1 for ADC conversions" "Disabled,Enabled"
|
|
endif
|
|
if (((per.long(ad:0x50008000))&0x01)==0x00)
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "SL2CFG,Slot 2 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL2 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL2 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL2 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN2 ,Enable the window compare function for slot 2" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN2 ,Enable slot 2 for ADC conversions" "Disabled,Enabled"
|
|
else
|
|
rgroup.long 0x14++0x03
|
|
line.long 0x00 "SL2CFG,Slot 2 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL2 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL2 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL2 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN2 ,Enable the window compare function for slot 2" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN2 ,Enable slot 2 for ADC conversions" "Disabled,Enabled"
|
|
endif
|
|
if (((per.long(ad:0x50008000))&0x01)==0x00)
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "SL3CFG,Slot 3 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL3 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL3 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL3 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN3 ,Enable the window compare function for slot 3" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN3 ,Enable slot 3 for ADC conversions" "Disabled,Enabled"
|
|
else
|
|
rgroup.long 0x18++0x03
|
|
line.long 0x00 "SL3CFG,Slot 3 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL3 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL3 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL3 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN3 ,Enable the window compare function for slot 3" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN3 ,Enable slot 3 for ADC conversions" "Disabled,Enabled"
|
|
endif
|
|
if (((per.long(ad:0x50008000))&0x01)==0x00)
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "SL4CFG,Slot 4 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL4 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL4 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL4 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN4 ,Enable the window compare function for slot 4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN4 ,Enable slot 4 for ADC conversions" "Disabled,Enabled"
|
|
else
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "SL4CFG,Slot 4 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL4 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL4 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL4 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN4 ,Enable the window compare function for slot 4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN4 ,Enable slot 4 for ADC conversions" "Disabled,Enabled"
|
|
endif
|
|
if (((per.long(ad:0x50008000))&0x01)==0x00)
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SL5CFG,Slot 5 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL5 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL5 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL5 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN5 ,Enable the window compare function for slot 5" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN5 ,Enable slot 5 for ADC conversions" "Disabled,Enabled"
|
|
else
|
|
rgroup.long 0x20++0x03
|
|
line.long 0x00 "SL5CFG,Slot 5 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL5 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL5 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL5 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN5 ,Enable the window compare function for slot 5" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN5 ,Enable slot 5 for ADC conversions" "Disabled,Enabled"
|
|
endif
|
|
if (((per.long(ad:0x50008000))&0x01)==0x00)
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "SL6CFG,Slot 6 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL6 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL6 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL6 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN6 ,Enable the window compare function for slot 6" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN6 ,Enable slot 6 for ADC conversions" "Disabled,Enabled"
|
|
else
|
|
rgroup.long 0x24++0x03
|
|
line.long 0x00 "SL6CFG,Slot 6 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL6 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL6 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL6 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN6 ,Enable the window compare function for slot 6" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN6 ,Enable slot 6 for ADC conversions" "Disabled,Enabled"
|
|
endif
|
|
if (((per.long(ad:0x50008000))&0x01)==0x00)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "SL7CFG,Slot 7 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL7 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL7 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL7 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN7 ,Enable the window compare function for slot 7" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN7 ,Enable slot 7 for ADC conversions" "Disabled,Enabled"
|
|
else
|
|
rgroup.long 0x28++0x03
|
|
line.long 0x00 "SL7CFG,Slot 7 Configuration Register"
|
|
bitfld.long 0x00 24.--26. " ADSEL7 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 16.--18. " THSEL7 ,Number of measurements to average in the accumulate divide module for this slot" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 8.--11. " CHSEL7 ,Select one of the 13 channel inputs for this slot" "EXT0,EXT1,EXT2,EXT3,EXT4,EXT5,EXT6,EXT7,TEMP,VDD,VSS,,VBATT,?..."
|
|
bitfld.long 0x00 1. " WCEN7 ,Enable the window compare function for slot 7" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " SLEN7 ,Enable slot 7 for ADC conversions" "Disabled,Enabled"
|
|
endif
|
|
group.long 0x2C++0x07
|
|
line.long 0x00 "WLIM,Window Comparator Limits Register"
|
|
hexmask.long.word 0x00 16.--31. 1. " ULIM ,Upper limit for the window comparator"
|
|
hexmask.long.word 0x00 0.--15. 1. " LLIM ,Lower limit for the window comparator"
|
|
line.long 0x04 "FIFO,FIFO Data and Valid Count Register"
|
|
bitfld.long 0x04 24.--26. " SLOTNUM ,Slot number associated with this FIFO data" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x04 16.--19. " COUNT ,Number of valid entries in the ADC FIFO" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
hexmask.long.word 0x04 0.--15. 1. " DATA ,Oldest data in the FIFO"
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,ADC Interrupt registers: Enable"
|
|
bitfld.long 0x00 5. " WCINC ,Window comparator voltage incursion interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " WCEXC ,Window comparator voltage excursion interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " FIFOOVR2 ,FIFO 100 percent full interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " FIFOOVR1 ,FIFO 75 percent full interrupt" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " SCNCMP ,ADC scan complete interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CNVCMP ,ADC conversion complete interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,ADC Interrupt registers: Status"
|
|
setclrfld.long 0x00 5. 0x08 5. 0x04 5. " WCINC ,Window comparator voltage incursion interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 4. 0x08 4. 0x04 4. " WCEXC ,Window comparator voltage excursion interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x08 3. 0x04 3. " FIFOOVR2 ,FIFO 100 percent full interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 2. 0x08 2. 0x04 2. " FIFOOVR1 ,FIFO 75 percent full interrupt" "No interrupt,Interrupt"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " SCNCMP ,ADC scan complete interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " CNVCMP ,ADC conversion complete interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "VCOMP (Voltage Comparator Module)"
|
|
base ad:0x4000C000
|
|
width 9.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register"
|
|
bitfld.long 0x00 16.--19. " LVLSEL ,Select negative input to the comparator" "0.58V,0.77V,0.97V,1.16V,1.35V,1.55V,1.74V,1.93V,2.13V,2.32V,2.51V,2.71V,2.90V,3.09V,3.29V,3.48V"
|
|
sif (cpu()=="AMAPH1KK")
|
|
bitfld.long 0x00 8.--9. " NSEL ,Select negative input to the comparator" "VREFEXT1,VREFEXT2,VREFEXT3,DAC"
|
|
else
|
|
bitfld.long 0x00 8.--9. " NSEL ,Select negative input to the comparator" "CMPRF0,CMPRF1,CMPRF2,DAC"
|
|
endif
|
|
bitfld.long 0x00 0.--1. " PSEL ,Select positive input to the comparator" "VDDADJ,VTEMP,VEXT1,VEXT2"
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "STAT,Status Register"
|
|
bitfld.long 0x00 1. " PWDSTAT ,Power down state of the voltage comparator" "Powered up,Powered down"
|
|
bitfld.long 0x00 0. " CMPOUT ,Positive input of the comparator is greater than the negative input" "Negative,Positive"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "PWDKEY,Key Register for Powering Down the Voltage Comparator Register"
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "INTEN,Voltage Comparator Interrupts Enable Register"
|
|
bitfld.long 0x00 1. " OUTHI ,Vcompout high interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " OUTLOW ,Vcompout low interrupt" "Disabled,Enabled"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "INTSTAT,Voltage Comparator Interrupts Status Register"
|
|
setclrfld.long 0x00 1. 0x08 1. 0x04 1. " OUTHI ,Vcompout high interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x08 0. 0x04 0. " OUTLOW ,Vcompout low interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
textline ""
|