woody/Gen4_R-Car_Trace32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
8532a4c95c1064bdcb9e901339d1cc049595ecd9
Gen4_R-Car_Trace32/2_Trunk/demo/arm/flash/stm32mp157-emmc.cmm
woody d411edd9b4 add Trace32 File
2025-10-14 09:52:32 +09:00

223 lines
7.0 KiB
Plaintext
Raw Blame History

; --------------------------------------------------------------------------------
; @Title: eMMC Flash program Script for ST STM32MP157, Toshiba, THGBMNG5D1LBAIL
;
; @Description:
; Boot configurations:
; BOOT[2:0] = x001 ;UART and USB
; BOOT[2:0] = x001 ;Serial NOR
; BOOT[2:0] = x010 ;eMMC
; BOOT[2:0] = x011 ;NAND
; BOOT[2:0] = x101 ;SD
; BOOT[2:0] = x111 ;Serial NAND
;
; eMMC pin configurations:
; SDMMC2_D0 -- PB14
; SDMMC2_D1 -- PB15
; SDMMC2_D2 -- PB3
; SDMMC2_D3 -- PB4
; SDMMC2_D4 -- PA8
; SDMMC2_D5 -- PA9
; SDMMC2_D6 -- PE5
; SDMMC2_D7 -- PD3
; SDMMC2_CK -- PE3
; SDMMC2_CMD -- PG6
;
; @Keywords: ARM, Cortex-A7, SDCARD
; @Author: JIM
; @Board: STM32MP15X-EVAL
; @Chip: STM32MP157A-CA7
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: stm32mp157-emmc.cmm 12745 2023-11-17 08:43:11Z mschaeffner $
WinCLEAR
&MMC_BASE=0x58007000 ;SDMMC2
PRIVATE &parameters
ENTRY %LINE &parameters
PRIVATE &param_prepareonly &param_cpu &param_dualport
&param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
&param_cpu=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"CPU=","")
&param_dualport=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"DUALPORT=","0")
; ------------------------------------------------------------------------------
; Setup CPU
RESet
SYStem.RESet
SYStem.CPU STM32MP157A-CA7
SYStem.JtagClock 10MHz
CORE.ASSIGN 1.
Trace.DISable
SYStem.MemAccess DAP
SYStem.Up
PER.Set.simple C15:0x1 %Long (Data.Long(C15:0x1)&~(0x1)) ; disable MMU
Data.Set A:0x500008F4 %LE %Long 0x3 ;0x3: hsi_ker_ck clock selected as kernel peripheral clock (default after reset)
; ------------------------------------------------------------------------------
; Flash Power & Clock Enable
Data.Set A:0x50000000+0x218 %LE %Long (0x1<<17.) ; RCC_MP_AHB6ENSETR, FMCEN
Data.Set A:0x50000000+0x19C %LE %Long (0x1<<17.) ; RCC_AHB6RSTCLRR, FMCEN NAND controller reset
Data.Set A:0x50000000+0x198 %LE %Long Data.Long(A:(0x50000000+0x198))&~(0x1<<17.) ; RCC_AHB6RSTSER, release NAND memory controller reset
Data.Set A:0x50000000+0x398 %LE %Long (0x1<<17.) ; RCC_AHB6LPENSETR, NAND memory controller clock enable during Sleep mode
Data.Set A:0x50000000+0xA28 %LE %Long 0xFF ;GPIO D(3) & E(4) & G(6) clk enable
; ------------------------------------------------------------------------------
; Flash Pin Mux Configuration
GOSUB PINMUX_CONFIG
; ------------------------------------------------------------------------------
; Flash Controller Init
GOSUB Init_MMC
GOSUB READ_ID_TEST
; ------------------------------------------------------------------------------
; Flashfile declaration
FLASHFILE.RESet
//FLASHFILE.CONFIG <Cmd_reg>
FLASHFILE.CONFIG &MMC_BASE
//FLASHFILE.TARGET <Code_range> <Data_range> <Algorithm file>
FLASHFILE.TARGET 0x30000000++0x1FFF E:0x30002000++0x27FF ~~/demo/arm/flash/byte/emmc_stm32mp15x.bin /KEEP /DualPort
//Read FLASH Manufacture and Device ID
FLASHFILE.GETID
PER.Set.simple A:&MMC_BASE+0x04 %Long 0x00030001 ; clk increase
; Flash script ends here if called with parameter PREPAREONLY
IF &param_prepareonly
ENDDO PREPAREDONE
//When you access to the other partition on the flash
;FLASHFILE.SETEXTCSD 179. 0x00 ; access: partition null, no boot, access: no boot partition
;FLASHFILE.SETEXTCSD 179. 0x48 ; access: partition null
;FLASHFILE.SETEXTCSD 179. 0x49 ; access: partition boot 1
;FLASHFILE.SETEXTCSD 179. 0x4A ; access: partition boot 2
//FLASHFILE.ERASE 0x0--0xFFFFF ; Erase the flash 0x0--0xFFFFF
//FLASHFILE.LOAD * 0x0 ; Write a file to the flash
//FLASHFILE.LOAD * 0x0 /ComPare ; Verify
FLASHFILE.DUMP 0x0 ; Read out from the flash
ENDDO
PINMUX_CONFIG:
(
//A
PER.Set.simple A:0x50002000+0x00 %Long 0xC7FAFFFF ; GPIOx_MODER
PER.Set.simple A:0x50002000+0x0C %Long 0x00050000 ; GPIOx_PUPDR
PER.Set.simple A:0x50002000+0x20 %Long 0x00000000 ; GPIOx_AFRL[7:0]
PER.Set.simple A:0x50002000+0x24 %Long 0x000000A9 ; GPIOx_AFRH[15:8]
//B
PER.Set.simple A:0x50003000+0x00 %Long 0xAFFFFEAF ; GPIOx_MODER
PER.Set.simple A:0x50003000+0x0C %Long 0x50000140 ; GPIOx_PUPDR
PER.Set.simple A:0x50003000+0x20 %Long 0x00099800 ; GPIOx_AFRL[7:0]
PER.Set.simple A:0x50003000+0x24 %Long 0x99000000 ; GPIOx_AFRH[15:8]
//D
PER.Set.simple A:0x50005000+0x00 %Long 0xFFDFFFBF ; GPIOx_MODER
PER.Set.simple A:0x50005000+0x0C %Long 0x00000040 ; GPIOx_PUPDR
PER.Set.simple A:0x50005000+0x20 %Long 0x00009000 ; GPIOx_AFRL[7:0]
PER.Set.simple A:0x50005000+0x24 %Long 0x00000000 ; GPIOx_AFRH[15:8]
//E
PER.Set.simple A:0x50006000+0x00 %Long 0xFFFFFBBF ; GPIOx_MODER
PER.Set.simple A:0x50006000+0x0C %Long 0x00000440 ; GPIOx_PUPDR
PER.Set.simple A:0x50006000+0x20 %Long 0x00909000 ; GPIOx_AFRL[7:0]
PER.Set.simple A:0x50006000+0x24 %Long 0x00000000 ; GPIOx_AFRH[15:8]
//G
PER.Set.simple A:0x50008000+0x00 %Long 0xFFBFEFFF ; GPIOx_MODER
PER.Set.simple A:0x50008000+0x0C %Long 0x00001000 ; GPIOx_PUPDR
PER.Set.simple A:0x50008000+0x20 %Long 0x0A000000 ; GPIOx_AFRL[7:0]
PER.Set.simple A:0x50008000+0x24 %Long 0x00006000 ; GPIOx_AFRH[15:8]
RETURN
)
Init_MMC:
(
//SDIO controller configuration
PER.Set.simple A:&MMC_BASE+0x00 %Long 0x13 ;power on
PER.Set.simple A:&MMC_BASE+0x24 %Long 0xFFFFFFFF
PER.Set.simple A:&MMC_BASE+0x28 %Long 0x200
PER.Set.simple A:&MMC_BASE+0x2C %Long 0x0
PER.Set.simple A:&MMC_BASE+0x04 %Long 0x0003007B ; clk around 400Khz, sdmmc_ker_ck / [2 * CLKDIV].
RETURN
)
READ_ID_TEST:
(
//CMD0
RePeaT 2.
(
Data.Set &MMC_BASE+0x38 %Long 0x1FE00FFF ;clear status
Data.Set &MMC_BASE+0x8 %Long 0x0 ;arg
Data.Set &MMC_BASE+0xc %Long 0x1000 ;cmd
WAIT 10.ms
)
//CMD1
RePeaT 10.
(
Data.Set &MMC_BASE+0x38 %Long 0x1FE00FFF ;clear status
Data.Set &MMC_BASE+0x8 %Long 0x40FF8080 ;arg
Data.Set &MMC_BASE+0xc %Long 0x1201 ; (0x1<<12)|(0x2<<8)|0x29 ;cmd41, resp1
WAIT 100.ms
&resp=Data.Long(A:(&MMC_BASE+0x14))
//print "CMD1 resp: 0x" &resp
IF (&resp&0x80000000)==0x80000000
(
GOTO jump_cmd2
)
)
PRINT "CMD1 fail"
END
jump_cmd2:
//CMD2
Data.Set &MMC_BASE+0x38 %Long 0x1FE00FFF ;clear status
Data.Set &MMC_BASE+0x8 %Long 0x0 ;arg
Data.Set &MMC_BASE+0xc %Long 0x1302; 0x0002|(0x3<<8)|(0x1<<12.) ;cmd2
WAIT 10.ms
//CMD3
Data.Set &MMC_BASE+0x38 %Long 0x1FE00FFF ;clear status
Data.Set &MMC_BASE+0x8 %Long 0x00010000 ; arg, MMC RCA is (0x0001<<16.)
Data.Set &MMC_BASE+0xc %Long 0x1103 ;0x003|(0x1<<8)|(0x1<<12.) ;cmd3
WAIT 10.ms
//CMD10
Data.Set &MMC_BASE+0x30 %Long 0x1FE00FFF ;clear status
Data.Set &MMC_BASE+0x8 %Long 0x010000 ; arg, card address
Data.Set &MMC_BASE+0xc %Long 0x130A ;cmd10
WAIT 10.ms
//Response2
PRINT "CID register"
PRINT "[127:104] 0x" Data.Long(A:(&MMC_BASE+0x14))
PRINT "[103:72] 0x" Data.Long(A:(&MMC_BASE+0x18))
PRINT "[71:40] 0x" Data.Long(A:(&MMC_BASE+0x1C))
PRINT "[39:8] 0x" Data.Long(A:(&MMC_BASE+0x20))
RETURN
)
SDRAM_INIT:
RETURN
Reference in New Issue View Git Blame Copy Permalink