9954 lines
757 KiB
Plaintext
9954 lines
757 KiB
Plaintext
; --------------------------------------------------------------------------------
|
|
; @Title: RSL10 On-Chip Peripherals
|
|
; @Props: Released
|
|
; @Author: DOR, DAS, CEZ
|
|
; @Changelog: 2019-11-12 DOR
|
|
; @Manufacturer: ON - ON Semiconductor
|
|
; @Doc: RSL10_hardware_reference.pdf (Rev. 3.1.0.539, 2019-09)
|
|
; @Core: Cortex-M3
|
|
; @Chip: RSL10
|
|
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
|
|
; --------------------------------------------------------------------------------
|
|
; $Id: perrsl10.per 17736 2024-04-08 09:26:07Z kwisniewski $
|
|
|
|
tree.close "Core Registers (Cortex-M3)"
|
|
AUTOINDENT.PUSH
|
|
AUTOINDENT.OFF
|
|
tree "System Control"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 11.
|
|
group 0x10--0x1b
|
|
line.long 0x00 "SYST_CSR,SysTick Control and Status Register"
|
|
bitfld.long 0x00 16. " COUNTFLAG ,Counter Flag" "Not counted,Counted"
|
|
bitfld.long 0x00 2. " CLKSOURCE ,Clock Source" "External,Core"
|
|
bitfld.long 0x00 1. " TICKINT ,SysTick Handler" "Not SysTick,SysTick"
|
|
textline " "
|
|
bitfld.long 0x00 0. " ENABLE ,Counter Enable" "Disabled,Enabled"
|
|
;group 0x14++0x03
|
|
line.long 0x04 "SYST_RVR,SysTick Reload Value Register"
|
|
hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD ,The value to load into the SYST_CVR when the counter reaches 0"
|
|
;group 0x18++0x03
|
|
line.long 0x08 "SYST_CVR,SysTick Current Value Register"
|
|
hexmask.long.tbyte 0x08 0.--23. 1. " CURRENT ,Current Value"
|
|
rgroup 0x1c++0x03
|
|
line.long 0x00 "SYST_CALIB,SysTick Calibration Value Register"
|
|
bitfld.long 0x00 31. " NOREF ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented"
|
|
bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing"
|
|
textline " "
|
|
rgroup 0xd00++0x03
|
|
line.long 0x00 "CPUID,CPU ID Base Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER ,Implementer Code"
|
|
bitfld.long 0x00 20.--23. " VARIANT ,Implementation Defined Variant Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 16.--19. " CONSTANT ,Constant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
hexmask.long.word 0x00 4.--15. 1. " PARTNO ,Number of Processor"
|
|
bitfld.long 0x00 0.--3. " REVISION ,Implementation Defined Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group 0xd04--0xd17
|
|
line.long 0x00 "ICSR,Interrupt Control State Register"
|
|
bitfld.long 0x00 31. " NMIPENDSET ,Set Pending NMI Bit" "Not set,Set"
|
|
bitfld.long 0x00 28. " PENDSVSET ,Set Pending pendSV Bit" "Not set,Set"
|
|
bitfld.long 0x00 27. " PENDSVCLR ,Clear Pending pendSV Bit" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 26. " PENDSTSET ,Set Pending SysTick Bit" "Not set,Set"
|
|
bitfld.long 0x00 25. " PENDSTCLR ,Clear Pending SysTick Bit" "Not cleared,Cleared"
|
|
bitfld.long 0x00 23. " ISRPREEMPT ,Use Only at Debug Time" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 22. " ISRPENDING ,Interrupt Pending Flag" "Not pending,Pending"
|
|
hexmask.long.word 0x00 12.--21. 1. " VECTPENDING ,Pending ISR Number Field"
|
|
bitfld.long 0x00 11. " RETTOBASE ,Interrupt Exception" "Active,Not active"
|
|
textline " "
|
|
hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE ,Active ISR Number Field"
|
|
;group 0xd08++0x03
|
|
line.long 0x04 "VTOR,Vector Table Offset Register"
|
|
bitfld.long 0x04 29. " TBLBASE ,Table Base" "Code,RAM"
|
|
hexmask.long.tbyte 0x04 7.--28. 1. " TBLOFF ,Vector Table Base Offset Field"
|
|
;group 0xd0c++0x03
|
|
line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register"
|
|
hexmask.long.word 0x08 16.--31. 1. " VECTKEY ,Register Key"
|
|
rbitfld.long 0x08 15. " ENDIANESS ,Data endianness Bit" "Little,Big"
|
|
bitfld.long 0x08 8.--10. " PRIGROUP ,Interrupt Priority Grouping Field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
|
|
textline " "
|
|
bitfld.long 0x08 2. " SYSRESETREQ ,System Reset Request" "Not requested,Requested"
|
|
bitfld.long 0x08 1. " VECTCLRACTIVE ,Clear Active Vector Bit" "Not cleared,Cleared all"
|
|
bitfld.long 0x08 0. " VECTRESET ,System Reset" "No reset,Reset"
|
|
;group 0xd10++0x03
|
|
line.long 0x0c "SCR,System Control Register"
|
|
bitfld.long 0x0c 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup"
|
|
bitfld.long 0x0c 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled"
|
|
;group 0xd14++0x03
|
|
line.long 0x10 "CCR,Configuration Control Register"
|
|
bitfld.long 0x10 9. " STKALIGN ,8-byte Stack Frame Alignment" "4-byte,8-byte"
|
|
bitfld.long 0x10 8. " BFHFNMIGN ,Enable NMI, Hard Fault and FAULTMASK to Ignore Bus Fault" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 4. " DIV_0_TRP ,Trap Divide by Zero" "Disabled,Enabled"
|
|
bitfld.long 0x10 3. " UNALIGN_TRP ,Trap for Unaligned Access" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 1. " USERSETMPEND ,Enable User Access to the Software Trigger Exception Register" "Disabled,Enabled"
|
|
bitfld.long 0x10 0. " NONEBASETHRDENA ,Control Entry to Thread Mode" "Only from last exception,Any level"
|
|
group 0xd18--0xd23
|
|
line.long 0x00 "SHPR1,SSystem Handler Priority Register 1"
|
|
hexmask.long.byte 0x00 24.--31. 1. " PRI_7 ,Priority of System Handler 7"
|
|
hexmask.long.byte 0x00 16.--23. 1. " PRI_6 ,Priority of system handler 6(UsageFault)"
|
|
hexmask.long.byte 0x00 8.--15. 1. " PRI_5 ,Priority of system handler 5(BusFault)"
|
|
textline " "
|
|
hexmask.long.byte 0x00 0.--7. 1. " PRI_4 ,Priority of system handler 4(MemManage)"
|
|
line.long 0x04 "SHPR2,System Handler Priority Register 2"
|
|
hexmask.long.byte 0x04 24.--31. 1. " PRI_11 ,Priority of system handler 11(SVCall)"
|
|
hexmask.long.byte 0x04 16.--23. 1. " PRI_10 ,Priority of System Handler 10"
|
|
hexmask.long.byte 0x04 8.--15. 1. " PRI_9 ,Priority of System Handler 9"
|
|
textline " "
|
|
hexmask.long.byte 0x04 0.--7. 1. " PRI_8 ,Priority of System Handler 8"
|
|
line.long 0x08 "SHPR3,System Handler Priority Register 3"
|
|
hexmask.long.byte 0x08 24.--31. 1. " PRI_15 ,Priority of System Handler 15(SysTick)"
|
|
hexmask.long.byte 0x08 16.--23. 1. " PRI_14 ,Priority of System Handler 14(PendSV)"
|
|
hexmask.long.byte 0x08 8.--15. 1. " PRI_13 ,Priority of System Handler 13"
|
|
textline " "
|
|
hexmask.long.byte 0x08 0.--7. 1. " PRI_12 ,Priority of System Handler 12(DebugMonitor)"
|
|
group 0xd24++0x3
|
|
line.long 0x00 "SHCSR,System Handler Control and State Register"
|
|
bitfld.long 0x00 18. " USGFAULTENA ,USGFAULTENA" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " BUSFAULTENA ,BUSFAULTENA" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " MEMFAULTENA ,MEMFAULTENA" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SVCALLPENDED ,SVCall is Pended Started" "Not replaced,Replaced"
|
|
bitfld.long 0x00 14. " BUSFAULTPENDED ,BusFault is Pended Started" "Not replaced,Replaced"
|
|
bitfld.long 0x00 13. " MEMFAULTPENDED ,MemManage is Pended Started" "Not replaced,Replaced"
|
|
textline " "
|
|
bitfld.long 0x00 11. " SYSTICKACT ,SysTick is Active" "Not active,Active"
|
|
bitfld.long 0x00 10. " PENDSVACT ,PendSV is Active" "Not active,Active"
|
|
bitfld.long 0x00 8. " MONITORACT ,Monitor is Active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " SVCALLACT ,SVCall is Active" "Not active,Active"
|
|
bitfld.long 0x00 3. " USGFAULTACT ,UsageFault is Active" "Not active,Active"
|
|
bitfld.long 0x00 1. " BUSFAULTACT ,BusFault is Active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 0. " MEMFAULTACT ,MemManage is Active" "Not active,Active"
|
|
group 0xd28--0xd3b
|
|
line.byte 0x0 "MMFSR,Memory Manage Fault Status Register"
|
|
bitfld.byte 0x0 7. " MMARVALID ,Address Valid Flag" "Not valid,Valid"
|
|
bitfld.byte 0x0 4. " MSTKERR ,Stacking Access Violations" "No error,Error"
|
|
bitfld.byte 0x0 3. " MUNSTKERR ,Unstack Access Violations" "No error,Error"
|
|
textline " "
|
|
bitfld.byte 0x0 1. " DACCVIOL ,Data Access Violation" "No error,Error"
|
|
bitfld.byte 0x0 0. " IACCVIOL ,Instruction Access Violation" "No error,Error"
|
|
;group 0xd29++0x00
|
|
line.byte 0x01 "BFSR,Bus Fault Status Register"
|
|
bitfld.byte 0x01 7. " BFARVALID ,Address Valid" "Not valid,Valid"
|
|
bitfld.byte 0x01 4. " STKERR ,Stacking from Exception has Caused Bus Faults" "No error,Error"
|
|
bitfld.byte 0x01 3. " UNSTKERR ,Unstack from Exception Return has Caused Bus Faults" "No error,Error"
|
|
textline " "
|
|
bitfld.byte 0x01 2. " IMPRECISERR ,Imprecise Data Bus Error" "No error,Error"
|
|
bitfld.byte 0x01 1. " PRECISERR ,Precise Data Bus Error Return" "No error,Error"
|
|
bitfld.byte 0x01 0. " IBUSERR ,Instruction Bus Error Flag" "No error,Error"
|
|
;group 0xd2a++0x01
|
|
line.word 0x02 "USAFAULT,Usage Fault Status Register"
|
|
bitfld.word 0x02 9. " DIVBYZERO ,Illegal PC Load" "No error,Error"
|
|
bitfld.word 0x02 8. " UNALIGNED ,Illegal Unaligned Access" "No error,Error"
|
|
bitfld.word 0x02 3. " NOCP ,Attempt to use a coprocessor instruction" "No error,Error"
|
|
textline " "
|
|
bitfld.word 0x02 2. " INVPC ,Attempt to Load EXC_RETURN into PC Illegally" "No error,Error"
|
|
bitfld.word 0x02 1. " INVSTATE , Invalid Combination of EPSR and Instruction" "No error,Error"
|
|
bitfld.word 0x02 0. " UNDEFINSTR ,Illegal Processor State" "No error,Error"
|
|
;group 0xd2c++0x03
|
|
line.long 0x04 "HFSR,Hard Fault Status Register"
|
|
bitfld.long 0x04 31. " DEBUGEVT ,This Bit is Set if There is a Fault Related to Debug" "No error,Error"
|
|
bitfld.long 0x04 30. " FORCED ,Hard Fault Activated" "No error,Error"
|
|
bitfld.long 0x04 1. " VECTTBL ,Bus Fault" "No error,Error"
|
|
;group 0xd30++0x03
|
|
line.long 0x08 "DFSR,Debug Fault Status Register"
|
|
bitfld.long 0x08 4. " EXTERNAL ,External Debug Request Flag" "Not asserted,Asserted"
|
|
bitfld.long 0x08 3. " VCATCH ,Vector Catch Flag" "Not occurred,Occurred"
|
|
bitfld.long 0x08 2. " DWTTRAP ,Data Watchpoint and Trace (DWT) Flag" "Not matched,Matched"
|
|
textline " "
|
|
bitfld.long 0x08 1. " BKPT ,BKPT Flag" "Not executed,Executed"
|
|
bitfld.long 0x08 0. " HALTED ,Halt Request Flag" "Not requested,Requested"
|
|
;group 0xd34++0x03
|
|
line.long 0xc "MMFAR,Memory Manage Fault Address Register"
|
|
;group 0xd38++0x03
|
|
line.long 0x10 "BFAR,Bus Fault Address Register"
|
|
wgroup 0xf00++0x03
|
|
line.long 0x00 "STIR,Software Trigger Interrupt Register"
|
|
hexmask.long.word 0x00 0.--8. 1. " INTID ,Indicates the interrupt to be triggered"
|
|
tree "Feature Registers"
|
|
width 10.
|
|
rgroup.long 0xD40++0x0B
|
|
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
|
|
bitfld.long 0x00 4.--7. " STATE1 ,Thumb instruction set support" ",,,Supported,?..."
|
|
bitfld.long 0x00 0.--3. " STATE0 ,ARM instruction set support" "Not supported,?..."
|
|
line.long 0x04 "ID_PFR1,Processor Feature Register 1"
|
|
bitfld.long 0x04 8.--11. " MPROF ,M profile programmers' model" ",,2-stack,?..."
|
|
line.long 0x08 "ID_DFR0,Debug Feature Register 0"
|
|
bitfld.long 0x08 20.--23. " DBGMOD ,Support for memory-mapped debug model for M profile processors" "Not supported,Supported,?..."
|
|
hgroup.long 0xD4C++0x03
|
|
hide.long 0x00 "ID_AFR0,Auxiliary Feature Register 0"
|
|
rgroup.long 0xD50++0x03
|
|
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
|
|
bitfld.long 0x00 20.--23. " AUXREG ,Indicates the support for Auxiliary registers" "Not supported,ACTLR only,?..."
|
|
bitfld.long 0x00 16.--19. " TCMSUP ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..."
|
|
bitfld.long 0x00 12.--15. " SHRLEV ,Indicates the number of shareability levels implemented" "Level 1,?..."
|
|
textline " "
|
|
bitfld.long 0x00 8.--11. " OUTMSHR ,Indicates the outermost shareability domain implemented" "Non-cacheable,,,,,,,,,,,,,,,Ignored"
|
|
bitfld.long 0x00 4.--7. " PMSASUP ,Indicates support for a PMSA" "Not supported,,,PMSAv7,?..."
|
|
hgroup.long 0xD54++0x03
|
|
hide.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
|
|
rgroup.long 0xD58++0x03
|
|
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
|
|
bitfld.long 0x00 24.--27. " WFISTALL ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..."
|
|
rgroup.long 0xD60++0x13
|
|
line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0"
|
|
bitfld.long 0x00 24.--27. " DIVIDE ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..."
|
|
bitfld.long 0x00 20.--23. " DEBUG ,Indicates the supported debug instructions" "Not supported,BKPT,?..."
|
|
bitfld.long 0x00 16.--19. " COPROC ,Indicates the supported coprocessor instructions" "Not supported,CDP/LDC/MCR/STC,CDP2/LDC2/MCR2/STC2,MCRR/MRRC,MCRR2/MRRC2,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..."
|
|
bitfld.long 0x00 8.--11. " BITFIELD ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..."
|
|
bitfld.long 0x00 4.--7. " BITCOUNT ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..."
|
|
line.long 0x04 "ID_ISAR1,Instruction Set Attributes Register 1"
|
|
bitfld.long 0x04 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..."
|
|
bitfld.long 0x04 20.--23. " IMMEDIATE ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..."
|
|
bitfld.long 0x04 16.--19. " IFTHEN ,Indicates the supported IfThen instructions" "Not supported,IT,?..."
|
|
textline " "
|
|
bitfld.long 0x04 12.--15. " EXTEND ,Indicates the supported Extend instructions" "Not supported,Supported,Supported,?..."
|
|
line.long 0x08 "ID_ISAR2,Instruction Set Attributes Register 2"
|
|
bitfld.long 0x08 24.--27. " REVERSAL ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..."
|
|
bitfld.long 0x08 20.--23. " MULTU ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..."
|
|
bitfld.long 0x08 16.--19. " MULTS ,Indicates the supported advanced signed multiply instructions" "Not supported,Supported,Supported,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x08 12.--15. " MULT ,Indicates the supported additional multiply instructions" "Not supported,MLA,MLA/MLS,?..."
|
|
bitfld.long 0x08 8.--11. " MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..."
|
|
bitfld.long 0x08 4.--7. " MEMHINT ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..."
|
|
textline " "
|
|
bitfld.long 0x08 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,LDRD/STRD,?..."
|
|
line.long 0x0C "ID_ISAR3,Instruction Set Attributes Register 3"
|
|
bitfld.long 0x0C 24.--27. " TRUENOP ,Indicates the support for a true NOP instruction" "Not supported,Supported,?..."
|
|
bitfld.long 0x0C 20.--23. " THUMBCOPY ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..."
|
|
bitfld.long 0x0C 16.--19. " TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,Supported,Supported,?..."
|
|
bitfld.long 0x0C 8.--11. " SVC ,Indicates the supported SVC instructions" "Not supported,SVC,?..."
|
|
bitfld.long 0x0C 4.--7. " SIMD ,Indicates the supported SIMD instructions" "Not supported,Supported,,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 0.--3. " SATURATE ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB,?..."
|
|
line.long 0x10 "ID_ISAR4,Instruction Set Attributes Register 4"
|
|
bitfld.long 0x10 24.--27. " PSR_M ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,?..."
|
|
bitfld.long 0x10 20.--23. " SYNCHPRIMFRAC ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,Supported,Supported,?..."
|
|
bitfld.long 0x10 16.--19. " BARRIER ,Indicates the supported Barrier instructions" "Not supported,DMB/DSB/ISB,?..."
|
|
textline " "
|
|
bitfld.long 0x10 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..."
|
|
bitfld.long 0x10 4.--7. " WITHSHIFTS ,Indicates the support for instructions with shifts" "MOV/shift,Shift LSL 0-3,,Shift other,?..."
|
|
bitfld.long 0x10 0.--3. " UNPRIV ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,LDRBT/LDRT/STRBT/STRT/LDRHT/LDRSBT/LDRSHTSTRHT,?..."
|
|
tree.end
|
|
tree "CoreSight Identification Registers"
|
|
width 6.
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0c "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0c "CID3,Component ID3"
|
|
tree.end
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Memory Protection Unit"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 15.
|
|
rgroup.long 0xD90++0x03
|
|
line.long 0x00 "MPU_TYPE,MPU Type Register"
|
|
bitfld.long 0x00 16.--23. " IREGION ,Instruction region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
|
|
bitfld.long 0x00 8.--15. " DREGION ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
|
|
bitfld.long 0x00 0. " SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,Supported"
|
|
group.long 0xD94++0x03
|
|
line.long 0x00 "MPU_CTRL,MPU Control Register"
|
|
bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " HFNMIENA ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables the MPU" "Disabled,Enabled"
|
|
group.long 0xD98++0x03
|
|
line.long 0x00 "MPU_RNR,MPU Region Number Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " REGION ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR"
|
|
tree.close "MPU regions"
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0
|
|
group.long 0xD9C++0x03 "Region 0"
|
|
saveout 0xD98 %l 0x0
|
|
line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x0
|
|
line.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 0 (not implemented)"
|
|
saveout 0xD98 %l 0x0
|
|
hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x0
|
|
hide.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1
|
|
group.long 0xD9C++0x03 "Region 1"
|
|
saveout 0xD98 %l 0x1
|
|
line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x1
|
|
line.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 1 (not implemented)"
|
|
saveout 0xD98 %l 0x1
|
|
hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x1
|
|
hide.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2
|
|
group.long 0xD9C++0x03 "Region 2"
|
|
saveout 0xD98 %l 0x2
|
|
line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x2
|
|
line.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 2 (not implemented)"
|
|
saveout 0xD98 %l 0x2
|
|
hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x2
|
|
hide.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3
|
|
group.long 0xD9C++0x03 "Region 3"
|
|
saveout 0xD98 %l 0x3
|
|
line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x3
|
|
line.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 3 (not implemented)"
|
|
saveout 0xD98 %l 0x3
|
|
hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x3
|
|
hide.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4
|
|
group.long 0xD9C++0x03 "Region 4"
|
|
saveout 0xD98 %l 0x4
|
|
line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x4
|
|
line.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 4 (not implemented)"
|
|
saveout 0xD98 %l 0x4
|
|
hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x4
|
|
hide.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5
|
|
group.long 0xD9C++0x03 "Region 5"
|
|
saveout 0xD98 %l 0x5
|
|
line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x5
|
|
line.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 5 (not implemented)"
|
|
saveout 0xD98 %l 0x5
|
|
hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x5
|
|
hide.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6
|
|
group.long 0xD9C++0x03 "Region 6"
|
|
saveout 0xD98 %l 0x6
|
|
line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x6
|
|
line.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 6 (not implemented)"
|
|
saveout 0xD98 %l 0x6
|
|
hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x6
|
|
hide.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7
|
|
group.long 0xD9C++0x03 "Region 7"
|
|
saveout 0xD98 %l 0x7
|
|
line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x7
|
|
line.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 7 (not implemented)"
|
|
saveout 0xD98 %l 0x7
|
|
hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x7
|
|
hide.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8
|
|
group.long 0xD9C++0x03 "Region 8"
|
|
saveout 0xD98 %l 0x8
|
|
line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x8
|
|
line.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 8 (not implemented)"
|
|
saveout 0xD98 %l 0x8
|
|
hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x8
|
|
hide.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9
|
|
group.long 0xD9C++0x03 "Region 9"
|
|
saveout 0xD98 %l 0x9
|
|
line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x9
|
|
line.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 9 (not implemented)"
|
|
saveout 0xD98 %l 0x9
|
|
hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x9
|
|
hide.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA
|
|
group.long 0xD9C++0x03 "Region 10"
|
|
saveout 0xD98 %l 0xA
|
|
line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xA
|
|
line.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 10 (not implemented)"
|
|
saveout 0xD98 %l 0xA
|
|
hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xA
|
|
hide.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB
|
|
group.long 0xD9C++0x03 "Region 11"
|
|
saveout 0xD98 %l 0xB
|
|
line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xB
|
|
line.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 11 (not implemented)"
|
|
saveout 0xD98 %l 0xB
|
|
hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xB
|
|
hide.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC
|
|
group.long 0xD9C++0x03 "Region 12"
|
|
saveout 0xD98 %l 0xC
|
|
line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xC
|
|
line.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 12 (not implemented)"
|
|
saveout 0xD98 %l 0xC
|
|
hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xC
|
|
hide.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD
|
|
group.long 0xD9C++0x03 "Region 13"
|
|
saveout 0xD98 %l 0xD
|
|
line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xD
|
|
line.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 13 (not implemented)"
|
|
saveout 0xD98 %l 0xD
|
|
hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xD
|
|
hide.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE
|
|
group.long 0xD9C++0x03 "Region 14"
|
|
saveout 0xD98 %l 0xE
|
|
line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xE
|
|
line.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 14 (not implemented)"
|
|
saveout 0xD98 %l 0xE
|
|
hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xE
|
|
hide.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF
|
|
group.long 0xD9C++0x03 "Region 15"
|
|
saveout 0xD98 %l 0xF
|
|
line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xF
|
|
line.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 15 (not implemented)"
|
|
saveout 0xD98 %l 0xF
|
|
hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xF
|
|
hide.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
tree.end
|
|
width 0x0b
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Nested Vectored Interrupt Controller"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 6.
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "ICTR,Interrupt Controller Type Register"
|
|
bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,33-64,65-96,97-128,129-160,161-192,193-224,225-240,?..."
|
|
tree "Interrupt Enable Registers"
|
|
width 23.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x100++0x03
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x100++0x7
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x100++0x0B
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x100++0x0F
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x100++0x13
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x100++0x17
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x100++0x1B
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x100++0x1F
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0x100++0x1F
|
|
hide.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Pending Registers"
|
|
width 23.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x200++0x07
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x200++0x0B
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x200++0x0F
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x200++0x13
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x200++0x17
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x200++0x1B
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x200++0x1F
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
else
|
|
hgroup.long 0x200++0x1F
|
|
hide.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Active Bit Registers"
|
|
width 9.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
rgroup.long 0x300++0x03
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
rgroup.long 0x300++0x07
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
rgroup.long 0x300++0x0B
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
rgroup.long 0x300++0x0F
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
rgroup.long 0x300++0x13
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
rgroup.long 0x300++0x17
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
rgroup.long 0x300++0x1B
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
rgroup.long 0x300++0x1F
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x1c "ACTIVE8,Active Bit Register 8"
|
|
bitfld.long 0x1c 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 14. " ACTIVE238 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 13. " ACTIVE237 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 12. " ACTIVE236 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 11. " ACTIVE235 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 10. " ACTIVE234 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x1c 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 8. " ACTIVE232 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 7. " ACTIVE231 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 6. " ACTIVE230 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 5. " ACTIVE229 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 4. " ACTIVE228 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x1c 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 2. " ACTIVE226 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 1. " ACTIVE225 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 0. " ACTIVE224 ,Interrupt Active Flag" "Not active,Active"
|
|
else
|
|
hgroup.long 0x300++0x1F
|
|
hide.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
hide.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
hide.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
hide.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
hide.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
hide.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
hide.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
hide.long 0x1c "ACTIVE8,Active Bit Register 8"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Priority Registers"
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x400++0x1F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x400++0x3F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x400++0x5F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x400++0x7F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x400++0x9F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x400++0xBF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x400++0xDF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
line.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
|
|
hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority"
|
|
hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority"
|
|
hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority"
|
|
line.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
|
|
hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority"
|
|
hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority"
|
|
hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority"
|
|
line.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
|
|
hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority"
|
|
hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority"
|
|
hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority"
|
|
line.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
|
|
hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority"
|
|
hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority"
|
|
hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority"
|
|
line.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
|
|
hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority"
|
|
hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority"
|
|
hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority"
|
|
line.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
|
|
hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority"
|
|
hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority"
|
|
hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority"
|
|
line.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
|
|
hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority"
|
|
hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority"
|
|
hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority"
|
|
line.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
|
|
hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority"
|
|
hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority"
|
|
hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x400++0xEF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
line.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
|
|
hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority"
|
|
hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority"
|
|
hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority"
|
|
line.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
|
|
hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority"
|
|
hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority"
|
|
hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority"
|
|
line.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
|
|
hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority"
|
|
hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority"
|
|
hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority"
|
|
line.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
|
|
hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority"
|
|
hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority"
|
|
hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority"
|
|
line.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
|
|
hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority"
|
|
hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority"
|
|
hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority"
|
|
line.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
|
|
hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority"
|
|
hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority"
|
|
hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority"
|
|
line.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
|
|
hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority"
|
|
hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority"
|
|
hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority"
|
|
line.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
|
|
hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority"
|
|
hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority"
|
|
hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority"
|
|
line.long 0xE0 "IPR56,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority"
|
|
hexmask.long.byte 0xE0 16.--23. 1. " PRI_226 ,Interrupt 226 Priority"
|
|
hexmask.long.byte 0xE0 8.--15. 1. " PRI_225 ,Interrupt 225 Priority"
|
|
hexmask.long.byte 0xE0 0.--7. 1. " PRI_224 ,Interrupt 224 Priority"
|
|
line.long 0xE4 "IPR57,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority"
|
|
hexmask.long.byte 0xE4 16.--23. 1. " PRI_230 ,Interrupt 230 Priority"
|
|
hexmask.long.byte 0xE4 8.--15. 1. " PRI_229 ,Interrupt 229 Priority"
|
|
hexmask.long.byte 0xE4 0.--7. 1. " PRI_228 ,Interrupt 228 Priority"
|
|
line.long 0xE8 "IPR58,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority"
|
|
hexmask.long.byte 0xE8 16.--23. 1. " PRI_234 ,Interrupt 234 Priority"
|
|
hexmask.long.byte 0xE8 8.--15. 1. " PRI_233 ,Interrupt 233 Priority"
|
|
hexmask.long.byte 0xE8 0.--7. 1. " PRI_232 ,Interrupt 232 Priority"
|
|
line.long 0xEC "IPR59,Interrupt Priority Register"
|
|
hexmask.long.byte 0xEC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority"
|
|
hexmask.long.byte 0xEC 16.--23. 1. " PRI_238 ,Interrupt 238 Priority"
|
|
hexmask.long.byte 0xEC 8.--15. 1. " PRI_237 ,Interrupt 237 Priority"
|
|
hexmask.long.byte 0xEC 0.--7. 1. " PRI_236 ,Interrupt 236 Priority"
|
|
else
|
|
hgroup.long 0x400++0xEF
|
|
hide.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hide.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hide.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hide.long 0xC "IPR3,Interrupt Priority Register"
|
|
hide.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hide.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hide.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hide.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hide.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hide.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hide.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hide.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hide.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hide.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hide.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hide.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hide.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hide.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hide.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hide.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hide.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hide.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hide.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hide.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hide.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hide.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hide.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hide.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hide.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hide.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hide.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hide.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hide.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hide.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hide.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hide.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hide.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hide.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hide.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hide.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hide.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hide.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hide.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hide.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hide.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hide.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hide.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hide.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hide.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hide.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hide.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hide.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hide.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hide.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hide.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hide.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hide.long 0xE0 "IPR56,Interrupt Priority Register"
|
|
hide.long 0xE4 "IPR57,Interrupt Priority Register"
|
|
hide.long 0xE8 "IPR58,Interrupt Priority Register"
|
|
hide.long 0xEC "IPR59,Interrupt Priority Register"
|
|
endif
|
|
tree.end
|
|
width 0x0b
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Debug"
|
|
tree "Core Debug"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 7.
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDF0))&0x20001)==0x20000)
|
|
group 0xDF0++0x03
|
|
line.long 0x00 "DHCSR,Debug Halting Control and Status Register"
|
|
bitfld.long 0x00 31. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 30. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 29. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 28. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 27. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 26. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset"
|
|
bitfld.long 0x00 24. " S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not read,Read"
|
|
textline " "
|
|
bitfld.long 0x00 23. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 22. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 21. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 20. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 19. " S_LOCKUP/DBGKEY ,Core running and Lockup/Debug Key" "Not running,Running"
|
|
bitfld.long 0x00 18. " S_SLEEP/DBGKEY ,Core is sleeping/Debug Key" "Not sleeping,Sleeping"
|
|
textline " "
|
|
bitfld.long 0x00 17. " S_HALT/DBGKEY ,Core Halted Status/Debug Key" "Not halted,Halted"
|
|
bitfld.long 0x00 16. " S_REGRDY/DBGKEY ,Register Read/Write on the Debug Core Register Selector/Debug Key" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " C_MASKINTS ,Interrupts Mask" "Not masked,Masked"
|
|
bitfld.long 0x00 1. " C_HALT ,Core Halted" "Not halted,Halted"
|
|
textline " "
|
|
bitfld.long 0x00 0. " C_DEBUGEN ,Debug Enable" "Disabled,Enabled"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDF0))&0x20001)==0x20001)
|
|
group 0xDF0++0x03
|
|
line.long 0x00 "DHCSR,Debug Halting Control and Status Register"
|
|
bitfld.long 0x00 31. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 30. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 29. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 28. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 27. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 26. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset"
|
|
bitfld.long 0x00 24. " S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not read,Read"
|
|
textline " "
|
|
bitfld.long 0x00 23. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 22. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 21. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 20. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 19. " S_LOCKUP/DBGKEY ,Core running and Lockup/Debug Key" "Not running,Running"
|
|
bitfld.long 0x00 18. " S_SLEEP/DBGKEY ,Core is sleeping/Debug Key" "Not sleeping,Sleeping"
|
|
textline " "
|
|
bitfld.long 0x00 17. " S_HALT/DBGKEY ,Core Halted Status/Debug Key" "Not halted,Halted"
|
|
bitfld.long 0x00 16. " S_REGRDY/DBGKEY ,Register Read/Write on the Debug Core Register Selector/Debug Key" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 5. " C_SNAPSTALL ,Halting debug to gain control of the core" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " C_MASKINTS ,Interrupts Mask" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 2. " C_STEP ,Core Step" "No step,Step"
|
|
bitfld.long 0x00 1. " C_HALT ,Core Halted" "Not halted,Halted"
|
|
textline " "
|
|
bitfld.long 0x00 0. " C_DEBUGEN ,Debug Enable" "Disabled,Enabled"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDF0))&0x20001)==0x0)
|
|
group 0xDF0++0x03
|
|
line.long 0x00 "DHCSR,Debug Halting Control and Status Register"
|
|
bitfld.long 0x00 31. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 30. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 29. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 28. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 27. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 26. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset"
|
|
bitfld.long 0x00 24. " S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not read,Read"
|
|
textline " "
|
|
bitfld.long 0x00 23. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 22. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 21. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 20. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 19. " S_LOCKUP/DBGKEY ,Core running and Lockup/Debug Key" "Not running,Running"
|
|
bitfld.long 0x00 18. " S_SLEEP/DBGKEY ,Core is sleeping/Debug Key" "Not sleeping,Sleeping"
|
|
textline " "
|
|
bitfld.long 0x00 17. " S_HALT/DBGKEY ,Core Halted Status/Debug Key" "Not halted,Halted"
|
|
bitfld.long 0x00 16. " S_REGRDY/DBGKEY ,Register Read/Write on the Debug Core Register Selector/Debug Key" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 1. " C_HALT ,Core Halted" "Not halted,Halted"
|
|
textline " "
|
|
bitfld.long 0x00 0. " C_DEBUGEN ,Debug Enable" "Disabled,Enabled"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDF0))&0x20001)==0x00001)
|
|
group 0xDF0++0x03
|
|
line.long 0x00 "DHCSR,Debug Halting Control and Status Register"
|
|
bitfld.long 0x00 31. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 30. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 29. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 28. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 27. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 26. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 25. " S_RESET_ST/DBGKEY ,Core Reset/Debug Key" "No reset,Reset"
|
|
bitfld.long 0x00 24. " S_RETIRE_ST/DBGKEY ,Instruction completed since last read/Debug Key" "Not read,Read"
|
|
textline " "
|
|
bitfld.long 0x00 23. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 22. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 21. " DBGKEY ,Debug Key" "0,1"
|
|
bitfld.long 0x00 20. " DBGKEY ,Debug Key" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 19. " S_LOCKUP/DBGKEY ,Core running and Lockup/Debug Key" "Not running,Running"
|
|
bitfld.long 0x00 18. " S_SLEEP/DBGKEY ,Core is sleeping/Debug Key" "Not sleeping,Sleeping"
|
|
textline " "
|
|
bitfld.long 0x00 17. " S_HALT/DBGKEY ,Core Halted Status/Debug Key" "Not halted,Halted"
|
|
bitfld.long 0x00 16. " S_REGRDY/DBGKEY ,Register Read/Write on the Debug Core Register Selector/Debug Key" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 2. " C_STEP ,Core Step" "No step,Step"
|
|
bitfld.long 0x00 1. " C_HALT ,Core Halted" "Not halted,Halted"
|
|
textline " "
|
|
bitfld.long 0x00 0. " C_DEBUGEN ,Debug Enable" "Disabled,Enabled"
|
|
endif
|
|
wgroup 0xDF4++0x03
|
|
line.long 0x00 "DCRSR,Debug Core Register Selector Register"
|
|
bitfld.long 0x00 16. " REGWNR ,Register Read/Write" "Read,Write"
|
|
bitfld.long 0x00 0.--4. " REGSEL ,Register Selection" "R0,R1,R2,R3,R4,R5,R6,R7,R8,R9,R10,R11,R12,R13,R14,R15,xPSR/ Flags,MSP,PSP,RAZ/WI,CONTROL/FAULTMASK/BASEPRI/PRIMASK,?..."
|
|
group 0xDF8++0x03
|
|
line.long 0x00 "DCRDR,Debug Core Register Data Register"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000)
|
|
group.long 0xDFC++0x03
|
|
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
|
|
bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1"
|
|
bitfld.long 0x00 18. " MON_STEP ,Setting this bit to 1 makes the step request pending" "No step,Step"
|
|
textline " "
|
|
bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
|
|
bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
|
|
else
|
|
group.long 0xDFC++0x03
|
|
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
|
|
bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
|
|
bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
|
|
endif
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Flash Patch and Breakpoint Unit (FPB)"
|
|
sif COMPonent.AVAILABLE("FPB")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))
|
|
width 10.
|
|
group 0x00--0x27
|
|
line.long 0x00 "FP_CTRL,Flash Patch Control Register"
|
|
bitfld.long 0x00 8.--11. " NUM_LIT ,Number of Literal Slots Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 4.--7. " NUM_CODE ,Number of Code Slots Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 1. " KEY ,Key Field" "Low,High"
|
|
bitfld.long 0x00 0. " ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled"
|
|
;group 0x04++0x03
|
|
line.long 0x04 "FP_REMAP,Flash Patch Remap Register"
|
|
hexmask.long.tbyte 0x04 5.--28. 1. " REMAP ,Remap Base Address Field"
|
|
;group 0x08++0x03
|
|
line.long 0x8 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
bitfld.long 0x8 30.--31. " REPLACE ,REPLACE" "Remap to remap address,Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x8 2.--28. 1. " COMP ,Comparison Address"
|
|
bitfld.long 0x8 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
line.long 0xC "FP_COMP1,Flash Patch Comparator Register 1"
|
|
bitfld.long 0xC 30.--31. " REPLACE ,REPLACE" "Remap to remap address,Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0xC 2.--28. 1. " COMP ,Comparison Address"
|
|
bitfld.long 0xC 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
line.long 0x10 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
bitfld.long 0x10 30.--31. " REPLACE ,REPLACE" "Remap to remap address,Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x10 2.--28. 1. " COMP ,Comparison Address"
|
|
bitfld.long 0x10 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
line.long 0x14 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
bitfld.long 0x14 30.--31. " REPLACE ,REPLACE" "Remap to remap address,Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x14 2.--28. 1. " COMP ,Comparison Address"
|
|
bitfld.long 0x14 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
line.long 0x18 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
bitfld.long 0x18 30.--31. " REPLACE ,REPLACE" "Remap to remap address,Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x18 2.--28. 1. " COMP ,Comparison Address"
|
|
bitfld.long 0x18 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
line.long 0x1C "FP_COMP5,Flash Patch Comparator Register 5"
|
|
bitfld.long 0x1C 30.--31. " REPLACE ,REPLACE" "Remap to remap address,Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x1C 2.--28. 1. " COMP ,Comparison Address"
|
|
bitfld.long 0x1C 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
line.long 0x20 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
bitfld.long 0x20 30.--31. " REPLACE ,REPLACE" "Remap to remap address,Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x20 2.--28. 1. " COMP ,Comparison Address"
|
|
bitfld.long 0x20 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
line.long 0x24 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
bitfld.long 0x24 30.--31. " REPLACE ,REPLACE" "Remap to remap address,Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x24 2.--28. 1. " COMP ,Comparison Address"
|
|
bitfld.long 0x24 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
tree "Coresight Management Registers"
|
|
rgroup 0xfd0--0xfff
|
|
line.long 0x00 "PID4,Peripheral ID4"
|
|
line.long 0x04 "PID5,Peripheral ID5"
|
|
line.long 0x08 "PID6,Peripheral ID6"
|
|
line.long 0x0c "PID7,Peripheral ID7"
|
|
line.long 0x10 "PID0,Peripheral ID0"
|
|
line.long 0x14 "PID1,Peripheral ID1"
|
|
line.long 0x18 "PID2,Peripheral ID2"
|
|
line.long 0x1c "PID3,Peripheral ID3"
|
|
line.long 0x20 "CID0,Component ID0"
|
|
line.long 0x24 "CID1,Component ID1"
|
|
line.long 0x28 "CID2,Component ID2"
|
|
line.long 0x2c "CID3,Component ID3"
|
|
tree.end
|
|
else
|
|
newline
|
|
textline "FPB component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Data Watchpoint and Trace Unit (DWT)"
|
|
sif COMPonent.AVAILABLE("DWT")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))
|
|
width 15.
|
|
group 0x00--0x1B
|
|
line.long 0x00 "DWT_CTRL,DWT Control Register"
|
|
bitfld.long 0x00 28.--31. " NUMCOMP ,Number of Comparators Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 22. " CYCEVTENA ,Enables Cycle Count Event" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " FOLDEVTENA ,Enables Folded Instruction Count Event" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 20. " LSUEVTENA ,Enables LSU Count Event" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " SLEEPEVTENA ,Enables Sleep Count Event" "Disabled,Enabled"
|
|
bitfld.long 0x00 18. " EXCEVTENA ,Enables Interrupt Overhead Event" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 17. " CPIEVTENA ,Enables CPI Count Event" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " EXCTRCENA ,Enables Interrupt Event Tracing" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " PCSAMPLEENA ,Enables PC Sampling Event" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " SYNCTAP ,Feed Synchronization Pulse to the ITM SYNCEN Control" "Disabled,24,26,28"
|
|
bitfld.long 0x00 9. " CYCTAP ,Selects a Tap on the DWT_CYCCNT Register" "Bit 6,Bit 10"
|
|
bitfld.long 0x00 5.--8. " POSTCNT ,Post-Scalar Counter for CYCTAP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 1.--4. " POSTPRESET ,Reload Value for POSTCNT Post-Scalar Counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 0. " CYCCNTENA ,Enable the DWT_CYCCNT Counter" "Disabled,Enabled"
|
|
;group 0x04++0x03
|
|
line.long 0x04 "DWT_CYCCNT,Cycle Count register"
|
|
;group 0x08++0x03
|
|
line.long 0x08 "DWT_CPICNT,DWT CPI Count Register"
|
|
hexmask.long.byte 0x08 0.--7. 1. " CPICNT ,The base CPI counter"
|
|
;group 0x0c++0x03
|
|
line.long 0x0c "DWT_EXCCNT,DWT Exception Overhead Count Register"
|
|
hexmask.long.byte 0x0c 0.--7. 1. " EXCCNT ,The exception overhead counter"
|
|
;group 0x10++0x03
|
|
line.long 0x10 "DWT_SLEEPCNT,DWT Sleep Count Register"
|
|
hexmask.long.byte 0x10 0.--7. 1. " SLEEPCNT ,Sleep Counter"
|
|
;group 0x14++0x03
|
|
line.long 0x14 "DWT_LSUCNT,DWT LSU Count Register"
|
|
hexmask.long.byte 0x14 0.--7. 1. " LSUCNT ,Load-store counter"
|
|
;group 0x18++0x03
|
|
line.long 0x18 "DWT_FOLDCNT,DWT Fold Count Register"
|
|
hexmask.long.byte 0x18 0.--7. 1. " FOLDCNT ,Folded-instruction counter"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "DWT_COMP0,DWT Comparator Register 0"
|
|
group.long 0x30++0x03
|
|
line.long 0x00 "DWT_COMP1,DWT Comparator Register 1"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DWT_COMP2,DWT Comparator Register 2"
|
|
group.long 0x50++0x03
|
|
line.long 0x00 "DWT_COMP3,DWT Comparator Register 3"
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "DWT_MASK0,DWT Mask Registers 0"
|
|
bitfld.long 0x00 0.--3. " MASK ,Mask on Data Address when Matching Against COMP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group.long 0x34++0x03
|
|
line.long 0x00 "DWT_MASK1,DWT Mask Registers 1"
|
|
bitfld.long 0x00 0.--3. " MASK ,Mask on Data Address when Matching Against COMP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group.long 0x44++0x03
|
|
line.long 0x00 "DWT_MASK2,DWT Mask Registers 2"
|
|
bitfld.long 0x00 0.--3. " MASK ,Mask on Data Address when Matching Against COMP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group.long 0x54++0x03
|
|
line.long 0x00 "DWT_MASK3,DWT Mask Registers 3"
|
|
bitfld.long 0x00 0.--3. " MASK ,Mask on Data Address when Matching Against COMP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x20)==0x00)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "byte,half,word,res"
|
|
bitfld.long 0x00 9. " LNK1ENA ,DATAVADDR1 support" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Comparator Compares Against the PC Sampler Counter" "Cleared,Set"
|
|
bitfld.long 0x00 5. " EMITRANGE ,Emit Range Field" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,FUNCTION settings" "Disabled,Sample and emit PC through ITM,Emit data through ITM,Sample PC and data value through ITM,Watchpoint on PC match,Watchpoint on read,Watchpoint on write,Watchpoint on read or write,ETM trigger on PC match,ETM trigger on read,ETM trigger on write,ETM trigger on read or write,?..."
|
|
else
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "byte,half,word,res"
|
|
bitfld.long 0x00 9. " LNK1ENA ,DATAVADDR1 support" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Comparator Compares Against the PC Sampler Counter" "Cleared,Set"
|
|
bitfld.long 0x00 5. " EMITRANGE ,Emit Range Field" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,FUNCTION settings" "Disabled,Emit address offset through ITM,Emit data and address offset through ITM,Emit address offset and data value through ITM,Watchpoint on PC match,Watchpoint on read,Watchpoint on write,Watchpoint on read or write,ETM trigger on PC match,ETM trigger on read,ETM trigger on write,ETM trigger on read or write,?..."
|
|
endif
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x38))&0x20)==0x00)
|
|
group.long 0x38++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "byte,half,word,res"
|
|
bitfld.long 0x00 9. " LNK1ENA ,DATAVADDR1 support" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Comparator Compares Against the PC Sampler Counter" "Cleared,Set"
|
|
bitfld.long 0x00 5. " EMITRANGE ,Emit Range Field" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,FUNCTION settings" "Disabled,Sample and emit PC through ITM,Emit data through ITM,Sample PC and data value through ITM,Watchpoint on PC match,Watchpoint on read,Watchpoint on write,Watchpoint on read or write,ETM trigger on PC match,ETM trigger on read,ETM trigger on write,ETM trigger on read or write,?..."
|
|
else
|
|
group.long 0x38++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "byte,half,word,res"
|
|
bitfld.long 0x00 9. " LNK1ENA ,DATAVADDR1 support" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Comparator Compares Against the PC Sampler Counter" "Cleared,Set"
|
|
bitfld.long 0x00 5. " EMITRANGE ,Emit Range Field" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,FUNCTION settings" "Disabled,Emit address offset through ITM,Emit data and address offset through ITM,Emit address offset and data value through ITM,Watchpoint on PC match,Watchpoint on read,Watchpoint on write,Watchpoint on read or write,ETM trigger on PC match,ETM trigger on read,ETM trigger on write,ETM trigger on read or write,?..."
|
|
endif
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x48))&0x20)==0x00)
|
|
group.long 0x48++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "byte,half,word,res"
|
|
bitfld.long 0x00 9. " LNK1ENA ,DATAVADDR1 support" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Comparator Compares Against the PC Sampler Counter" "Cleared,Set"
|
|
bitfld.long 0x00 5. " EMITRANGE ,Emit Range Field" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,FUNCTION settings" "Disabled,Sample and emit PC through ITM,Emit data through ITM,Sample PC and data value through ITM,Watchpoint on PC match,Watchpoint on read,Watchpoint on write,Watchpoint on read or write,ETM trigger on PC match,ETM trigger on read,ETM trigger on write,ETM trigger on read or write,?..."
|
|
else
|
|
group.long 0x48++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "byte,half,word,res"
|
|
bitfld.long 0x00 9. " LNK1ENA ,DATAVADDR1 support" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Comparator Compares Against the PC Sampler Counter" "Cleared,Set"
|
|
bitfld.long 0x00 5. " EMITRANGE ,Emit Range Field" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,FUNCTION settings" "Disabled,Emit address offset through ITM,Emit data and address offset through ITM,Emit address offset and data value through ITM,Watchpoint on PC match,Watchpoint on read,Watchpoint on write,Watchpoint on read or write,ETM trigger on PC match,ETM trigger on read,ETM trigger on write,ETM trigger on read or write,?..."
|
|
endif
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x58))&0x20)==0x00)
|
|
group.long 0x58++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "byte,half,word,res"
|
|
bitfld.long 0x00 9. " LNK1ENA ,DATAVADDR1 support" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Comparator Compares Against the PC Sampler Counter" "Cleared,Set"
|
|
bitfld.long 0x00 5. " EMITRANGE ,Emit Range Field" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,FUNCTION settings" "Disabled,Sample and emit PC through ITM,Emit data through ITM,Sample PC and data value through ITM,Watchpoint on PC match,Watchpoint on read,Watchpoint on write,Watchpoint on read or write,ETM trigger on PC match,ETM trigger on read,ETM trigger on write,ETM trigger on read or write,?..."
|
|
else
|
|
group.long 0x58++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "byte,half,word,res"
|
|
bitfld.long 0x00 9. " LNK1ENA ,DATAVADDR1 support" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Comparator Compares Against the PC Sampler Counter" "Cleared,Set"
|
|
bitfld.long 0x00 5. " EMITRANGE ,Emit Range Field" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,FUNCTION settings" "Disabled,Emit address offset through ITM,Emit data and address offset through ITM,Emit address offset and data value through ITM,Watchpoint on PC match,Watchpoint on read,Watchpoint on write,Watchpoint on read or write,ETM trigger on PC match,ETM trigger on read,ETM trigger on write,ETM trigger on read or write,?..."
|
|
endif
|
|
tree "Coresight Management Registers"
|
|
rgroup 0xfd0--0xfff
|
|
line.long 0x00 "PID4,Peripheral ID4"
|
|
line.long 0x04 "PID5,Peripheral ID5"
|
|
line.long 0x08 "PID6,Peripheral ID6"
|
|
line.long 0x0c "PID7,Peripheral ID7"
|
|
line.long 0x10 "PID0,Peripheral ID1"
|
|
line.long 0x14 "PID1,Peripheral ID2"
|
|
line.long 0x18 "PID2,Peripheral ID3"
|
|
line.long 0x1c "PID3,Peripheral ID4"
|
|
line.long 0x20 "CID0,Component ID0"
|
|
line.long 0x24 "CID1,Component ID1"
|
|
line.long 0x28 "CID2,Component ID2"
|
|
line.long 0x2c "CID3,Component ID3"
|
|
tree.end
|
|
else
|
|
newline
|
|
textline "DWT component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree.end
|
|
AUTOINDENT.POP
|
|
tree.end
|
|
config 16. 8.
|
|
tree "SOCI (SoC Identification)"
|
|
base ad:0x1FFFFFFC
|
|
width 21.
|
|
rgroup.long 0x00++0x03
|
|
line.long 0x00 "AHBREGS_CHIP_ID_NUM,Chip ID Number Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " CHIP_FAMILY ,Chip family number"
|
|
hexmask.long.byte 0x00 16.--23. 1. " CHIP_VERSION ,Chip version number"
|
|
hexmask.long.byte 0x00 8.--15. 1. " CHIP_MAJOR_REVISION ,Chip major revision number"
|
|
hexmask.long.byte 0x00 3.--7. 1. " CHIP_MINOR_REVISION ,Chip minor revision number"
|
|
bitfld.long 0x00 0. " AOBLE_FEATURE ,Audio over Bluetooth low energy feature presence" "Not present,Present"
|
|
width 0x0B
|
|
tree.end
|
|
tree.open "CM3 (ARM CM3 Processor)"
|
|
tree "LC (Loop Cache)"
|
|
base ad:0x4000000C
|
|
width 28.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "SYSCTRL_CSS_LOOP_CACHE_CFG,CSS Loop Cache Configuration Register"
|
|
bitfld.long 0x00 0. " CSS_LOOP_CACHE_ENABLE ,CSS loop cache enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "IPP (IP Protection)"
|
|
base ad:0x400000DC
|
|
width 25.
|
|
wgroup.long 0x00++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_LOCK,Debug Port Access Configuration Register"
|
|
rgroup.long 0x00++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_LOCK,Debug Port Access Configuration Register"
|
|
bitfld.long 0x00 0. " DBG_LOCK_RD ,Debug port access state" "Unlocked,Locked"
|
|
group.long 0x4++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_LOCK_KEY_0,Debug Port Lock Key Part 0 Register"
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_LOCK_KEY_1,Debug Port Lock Key Part 1 Register"
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_LOCK_KEY_2,Debug Port Lock Key Part 2 Register"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_LOCK_KEY_3,Debug Port Lock Key Part 3 Register"
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_UNLOCK_KEY_0,Debug Port Unlock Key Part 0 Register"
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_UNLOCK_KEY_1,Debug Port Unlock Key Part 1 Register"
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_UNLOCK_KEY_2,Debug Port Unlock Key Part 2 Register"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SYSCTRL_DBG_UNLOCK_KEY_3,Debug Port Unlock Key Part 3 Register"
|
|
width 0x0B
|
|
tree.end
|
|
tree "ACC (Activity Counters)"
|
|
base ad:0x40000030
|
|
width 24.
|
|
group.long 0x00++0x13
|
|
line.long 0x00 "SYSCTRL_CNT_CTRL,Activity Counters Control Register"
|
|
rbitfld.long 0x00 3. " CNT_STATUS ,Activity counter status bit" "Stopped,Running"
|
|
bitfld.long 0x00 2. " CNT_CLEAR ,Activity counters clear" "No effect,Clear"
|
|
bitfld.long 0x00 1. " CNT_STOP ,Activity counters stop" "No effect,Stop"
|
|
bitfld.long 0x00 0. " CNT_START ,Activity counters start" "No effect,Start"
|
|
line.long 0x04 "SYSCTRL_SYSCLK_CNT,System Clock Counter Value Register"
|
|
line.long 0x08 "SYSCTRL_CM3_CNT,ARM Cortex-M3 Core Activity Counter Value Register"
|
|
line.long 0x0C "SYSCTRL_LPDSP32_CNT,LPDSP32 Activity Counter Value Register"
|
|
line.long 0x10 "SYSCTRL_FLASH_READ_CNT,Flash Read Access Counter Value Register"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "LPDSP32 (LPDSP32 Processor)"
|
|
base ad:0x40000000
|
|
width 28.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "SYSCTRL_DSS_CTRL,DSS Control Register"
|
|
bitfld.long 0x00 5. " DSS_CSS_INT_RESET ,CSS interrupts in the DSS interrupt controller 1 reset" "No effect,Reset"
|
|
bitfld.long 0x00 4. " DSS_DMA_INT_RESET ,DMA interrupts in the DSS interrupt controller reset" "No effects,Reset"
|
|
bitfld.long 0x00 3. " DSS_RESET ,DSS reset" "No effect,Reset"
|
|
bitfld.long 0x00 2. " LPDSP32_PAUSE ,LPDSP32 pause" "No effect,Paused"
|
|
newline
|
|
bitfld.long 0x00 1. " LPDSP32_RESUME ,PLDSP32 resume" "No effect,Resumed"
|
|
rbitfld.long 0x00 0. " LPDSP32_RUNNING ,LPDSP32 running status" "Paused,Running"
|
|
wgroup.long 0x04++0x03
|
|
line.long 0x00 "SYSCTRL_DSS_CMD,DSS Commands Register"
|
|
bitfld.long 0x00 6. " DSS_CMD_6 ,DSS command 6 issue" "No effect,Issue"
|
|
bitfld.long 0x00 5. " DSS_CMD_5 ,DSS command 5 issue" "No effect,Issue"
|
|
bitfld.long 0x00 4. " DSS_CMD_4 ,DSS command 4 issue" "No effect,Issue"
|
|
bitfld.long 0x00 3. " DSS_CMD_3 ,DSS command 3 issue" "No effect,Issue"
|
|
newline
|
|
bitfld.long 0x00 2. " DSS_CMD_2 ,DSS command 2 issue" "No effect,Issue"
|
|
bitfld.long 0x00 1. " DSS_CMD_1 ,DSS command 1 issue" "No effect,Issue"
|
|
bitfld.long 0x00 0. " DSS_CMD_0 ,DSS command 0 issue" "No effect,Issue"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "SYSCTRL_DSS_LOOP_CACHE_CFG,DSS Loop Cache Configuration Register"
|
|
bitfld.long 0x00 0. " DSS_LOOP_CACHE_ENABLE ,DSS loop cache enable" "Disabled,Enabled"
|
|
group.long 0x4C++0x03
|
|
line.long 0x00 "SYSCTRL_LPDSP32_DEBUG_CFG,LPDSP32 Debug Port Configuration Register"
|
|
bitfld.long 0x00 1. " LPDSP32_EXIT_POWERDOWN_WHEN_HALTED ,LPDSP exit power down when halted enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " LPDSP32_DEBUG_ENABLE ,LPDSP32 debug port enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree.open "PWR (Power)"
|
|
tree "IPSV (Internal Power Supply Voltages)"
|
|
base ad:0x40001300
|
|
width 18.
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "ACS_VCC_CTRL,DC-DC / LDO Supply Configuration / Control Register"
|
|
bitfld.long 0x00 16.--19. " ICH_TRIM ,Inductor charge current trimming" "16 mA,32 mA,64 mA,80 mA,,,,,,,,,,,,256 mA"
|
|
bitfld.long 0x00 11. " CH_ENABLE ,CCM mode enable" "Discontinuous,Continuous"
|
|
bitfld.long 0x00 10. " PULSE_CTRL ,Pulse mode control" "Single,Multi"
|
|
bitfld.long 0x00 9. " CHARGE_CTRL ,Charge mode control" "Constant charge,Constant inductor maximum"
|
|
newline
|
|
bitfld.long 0x00 8. " BUCK_ENABLE ,Buck converter mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--4. " VTRIM ,Output voltage trimming configuration" "1 V,,,,,1.05 V,,,,,1.10 V,,,,,1.15 V,,,,,1.2 V,,,,,1.25 V,,,,,,1.31 V"
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "ACS_BG_CTRL,Bandgap Configuration / Control Register"
|
|
bitfld.long 0x00 8.--12. " SLOPE_TRIMM ,Temperature coefficient trimming" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x00 0.--5. " VTRIM ,Reference voltage trimming" "0.675 V,0.6775 V,,,,,,,,,,,,,,,,,,,,,,,,,,,,0.7475 V,0.75 V,0.7525 V,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,0.83 V,0.8325 V"
|
|
group.long 0x14++0x07
|
|
line.long 0x00 "ACS_VDDRF_CTRL,RF Block Configuration / Control Register"
|
|
rbitfld.long 0x00 24. " READY ,Supply ready" "Not ready,Ready"
|
|
bitfld.long 0x00 12. " CLAMP ,Disable mode clamp control" "Set to HIZ,Clamp"
|
|
bitfld.long 0x00 8. " ENABLE ,VDDRF regulator enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--5. " VTRIM ,Output voltage trimming configuration" "0.75 V,0.76 V,,,,,,,,,,,,,,,,,,,,,,,,1 V,,,,,,,,1.08 V,,1.1 V,,,,,1.15 V,,,,,1.2 V,,,,,1.25 V,,,,,,,1.32 V,,,,,,1.38 V"
|
|
line.long 0x04 "ACS_VDDPA_CTRL,RF Block Regulator Configuration / Control Register"
|
|
bitfld.long 0x04 12. " VDDPA_SW_CTRL ,Power amplifier supply control" "Set to HIZ,VDDRF"
|
|
bitfld.long 0x04 9. " ENABLE_ISENSE ,Current sensing circuit enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 8. " ENABLE ,VDDPA regulator enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--5. " VTRIM ,Output voltage trimming" "1.05 V,1.06 V,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,1.59 V,1.60 V,1.61 V,,,,,,,1.68 V"
|
|
group.long 0x0C++0x07
|
|
line.long 0x00 "ACS_VDDC_CTRL,Digital Core Voltage Regulator Configuration / Control Register"
|
|
bitfld.long 0x00 16.--21. " STANDBY_VTRIM ,VDDC standby voltage trimming" "0.75 V,0.76 V,,,,,,,,,,,,,,,,,,,,,,,,1 V,,,,,,,,1.08 V,,1.1 V,,,,,1.15 V,,,,,1.2 V,,,,,1.25 V,,,,,,,1.32 V,,,,,,1.38 V"
|
|
bitfld.long 0x00 13. " ENABLE_LOW_BIAS ,Low power mode control" "Nominal,Low"
|
|
bitfld.long 0x00 12. " SLEEP_CLAMP ,Sleep mode clamp control" "Set to HIZ,Clamp"
|
|
bitfld.long 0x00 0.--5. " VTRIM ,Output voltage trimming configuration" "0.75 V,0.76 V,,,,,,,,,,,,,,,,,,,,,,,,1.0 V,,,,,,,,1.08 V,,1.1 V,,,,,1.15 V,,,,,1.2 V,,,,,1.25 V,,,,,,,1.32 V,,,,,,1.38 V"
|
|
line.long 0x04 "ACS_VDDM_CTRL,Memories Voltage Configuration / Control Register"
|
|
bitfld.long 0x04 16.--21. " STANDBY_VTRIM ,VDDC standby voltage trimming" "0.75 V,0.76 V,,,,,,,,,,,,,,,,,,,,,,,,1 V,,,,,,,,1.08 V,,1.1 V,,,,,1.15 V,,,,,1.2 V,,,,,1.25 V,,,,,,,1.32 V,,,,,,1.38 V"
|
|
bitfld.long 0x04 13. " ENABLE_LOW_BIAS ,Low power mode control" "Nominal,Low"
|
|
bitfld.long 0x04 12. " SLEEP_CLAMP ,Sleep mode clamp control" "Set to HIZ,Clamp"
|
|
bitfld.long 0x04 0.--5. " VTRIM ,Output voltage trimming configuration" "0.75 V,0.76 V,,,,,,,,,,,,,,,,,,,,,,,,1 V,,,,,,,,1.08 V,,1.1 V,,,,,1.15 V,,,,,1.2 V,,,,,1.25 V,,,,,,,1.32 V,,,,,,1.38 V"
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "ACS_VDDRET_CTRL,Retention Regulator Configuration / Control Register"
|
|
bitfld.long 0x00 17.--18. " VDDMRET_VTRIM ,VDDMRET retention regulator voltage trimming" "0,1,2,3"
|
|
bitfld.long 0x00 16. " VDDMRET_ENABLE ,VDDMRET retention regulator enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9.--10. " VDDTRET_VTRIM ,VDDTRET retention regulator voltage trimming" "0,1,2,3"
|
|
bitfld.long 0x00 8. " VDDTRET_ENABLE ,VDDTRET retention regulator enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 1.--2. " VDDCRET_VTRIM ,VDDCRET retention regulator voltage trimming" "0,1,2,3"
|
|
bitfld.long 0x00 0. " VDDCRET_ENABLE ,VDDCRET retention regulator enable" "Disabled,Enabled"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "ACS_VDDA_CP_CTRL,Analog Voltage And Flash Charge Pump Configuration / Control Register"
|
|
bitfld.long 0x00 0.--1. " PTRIM ,Output power trimming" "4 mA,8 mA,12 mA,16 mA"
|
|
width 0x0B
|
|
tree.end
|
|
tree "PM (Power Modes)"
|
|
base ad:0x40001340
|
|
width 24.
|
|
tree "Standby Mode Registers"
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "ACS_PWR_MODES_CTRL,Power Modes Control Register"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "ACS_WAKEUP_CFG,Wakeup Configuration Register"
|
|
bitfld.long 0x00 16.--18. " DELAY ,Delay from VDDC ready to digital clock enable (in clock cycles)" "1,2,4,8,16,32,64,128"
|
|
bitfld.long 0x00 9. " DCDC_OVERLOAD_EN ,Wakeup functionality on the DC-DC overload flag enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " WAKEUP_PAD_POL ,Wakeup polarity on WAKEUP pad" "Rising/pull-down,Falling/pull-up"
|
|
bitfld.long 0x00 7. " DIO3_POL ,Wakeup polarity on DIO3 pad" "Rising,Falling"
|
|
newline
|
|
bitfld.long 0x00 6. " DIO2_POL ,Wakeup polarity on DIO2 pad" "Rising,Falling"
|
|
bitfld.long 0x00 5. " DIO1_POL ,Wakeup polarity on DIO1 pad" "Rising,Falling"
|
|
bitfld.long 0x00 4. " DIO0_POL ,Wakeup polarity on DIO0 pad" "Rising,Falling"
|
|
bitfld.long 0x00 3. " DIO3_EN ,Wakeup functionality on the DIO3 pad enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 2. " DIO2_EN ,Wakeup functionality on the DIO2 pad enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " DIO1_EN ,Wakeup functionality on the DIO1 pad enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " DIO0_EN ,Wakeup functionality on the DIO0 pad enable" "Disabled,Enabled"
|
|
rgroup.long 0x0C++0x03
|
|
line.long 0x00 "ACS_WAKEUP_STATE,Wakeup State Register"
|
|
bitfld.long 0x00 16.--18. " WAKEUP_SRC ,Last wakeup source indicator" "DIO0 pad,DIO1 pad,DIO2 pad,DIO3 pad,Baseband timer alarm,RTC timer alarm,WAKEUP pad,DC-DC overload"
|
|
hexmask.long.byte 0x00 0.--7. 1. " RTC_VALUE ,RTC counter value captured at wakeup event"
|
|
newline
|
|
tree.end
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "ACS_WAKEUP_CTRL,Wakeup Control Register"
|
|
bitfld.long 0x00 24. " PADS_RETENTION_EN ,Retention mode of the pads enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " BOOT_FLASH_APP_REBOOT ,Boot mode flag" "Not set,Set"
|
|
rbitfld.long 0x00 19. " RC_CLOCK_MULT ,RC oscillator clock multiplier" "3 MHz,12 MHz"
|
|
newline
|
|
rbitfld.long 0x00 18. " RC_FTRIM_FLAG ,RC oscillator trimming flag" "Not calibrated,Calibrated"
|
|
bitfld.long 0x00 16.--17. " BOOT_SELECT ,Boot source selection bit" "Flash/XTAL not started,Retention RAM/XTAL not started,Flash/XTAL started w/ def trim,Flash/XTAL started w/ custom trim"
|
|
rbitfld.long 0x00 15. " DCDC_OVERLOAD_WAKEUP ,Wakeup was triggered by DC-DC overload indicator" "Not triggered,Triggered"
|
|
newline
|
|
rbitfld.long 0x00 14. " WAKEUP_PAD_WAKEUP ,Wakeup was triggered by WAKEUP pad indicator" "Not triggered,Triggered"
|
|
rbitfld.long 0x00 13. " RTC_ALARM_WAKEUP ,Wakeup was triggered by RTC alarm indicator" "Not triggered,Triggered"
|
|
rbitfld.long 0x00 12. " BB_TIMER_WAKEU ,Wakeup was triggered by the baseband timer indicator" "Not triggered,Triggered"
|
|
newline
|
|
rbitfld.long 0x00 11. " DIO3_WAKEUP ,Wakeup was triggered by DIO3 indicator" "Not triggered,Triggered"
|
|
rbitfld.long 0x00 10. " DIO2_WAKEUP ,Wakeup was triggered by DIO2 indicator" "Not triggered,Triggered"
|
|
rbitfld.long 0x00 9. " DIO1_WAKEUP ,Wakeup was triggered by DIO1 indicator" "Not triggered,Triggered"
|
|
newline
|
|
rbitfld.long 0x00 8. " DIO0_WAKEUP ,Wakeup was triggered by DIO0 indicator" "Not triggered,Triggered"
|
|
bitfld.long 0x00 7. " DCDC_OVERLOAD_CLEAR ,DC-DC overload wakeup status bit clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 6. " WAKEUP_PAD_WAKEUP_CLEAR ,WAKEUP pad wakeup status bit clear" "Not cleared,Cleared"
|
|
newline
|
|
bitfld.long 0x00 5. " RTC_ALARM_WAKEUP_CLEAR ,RTC alarm wakeup status bit clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 4. " BB_TIMER_WAKEUP_CLEAR ,Baseband timer wakeup status bit clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 3. " DIO3_WAKEUP_CLEAR ,DIO3 wakeup status bit clear" "Not cleared,Cleared"
|
|
newline
|
|
bitfld.long 0x00 2. " DIO2_WAKEUP_CLEAR ,DIO2 wakeup status bit clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 1. " DIO1_WAKEUP_CLEAR ,DIO1 wakeup status bit clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 0. " DIO0_WAKEUP_CLEAR ,DIO0 wakeup status bit clear" "Not cleared,Cleared"
|
|
base ad:0x4000001C
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "SYSCTRL_MEM_ACCESS_CFG,Memory Access Configuration Register"
|
|
hexmask.long.byte 0x00 24.--30. 0x01 " WAKEUP_ADDR_PACKED ,Wakeup restore address in packed 7-bit format"
|
|
bitfld.long 0x00 21. " DSP_DRAM5_ACCESS ,DSP DRAM5 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " DSP_DRAM4_ACCESS ,DSP DRAM4 access configuration" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 19. " DSP_DRAM3_ACCESS ,DSP DRAM3 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 18. " DSP_DRAM2_ACCESS ,DSP DRAM2 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " DSP_DRAM1_ACCESS ,DSP DRAM1 access configuration" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 16. " DSP_DRAM0_ACCESS ,DSP DRAM0 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 15. " DSP_PRAM3_ACCESS ,DSP PRAM3 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " DSP_PRAM2_ACCESS ,DSP PRAM2 access configuration" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 13. " DSP_PRAM1_ACCESS ,DSP PRAM1 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " DSP_PRAM0_ACCESS ,DSP PRAM0 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 11. " BB_DRAM1_ACCESS ,Baseband DRAM1 access configuration" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 10. " BB_DRAM0_ACCESS ,Baseband DRAM0 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " DRAM2_ACCESS ,DRAM2 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " DRAM1_ACCESS ,DRAM1 access configuration" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " DRAM0_ACCESS ,DRAM0 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PRAM3_ACCESS ,PRAM3 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PRAM2_ACCESS ,PRAM2 access configuration" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 3. " PRAM1_ACCESS ,PRAM1 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PRAM0_ACCESS ,PRAM0 access configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " FLASH_ACCESS ,Flash access configuration" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " PROM_ACCESS ,PROM access configuration" "Disabled,Enabled"
|
|
line.long 0x04 "SYSCTRL_WAKEUP_ADDR,Wakeup Address Register"
|
|
rgroup.long 0x3C++0x03
|
|
line.long 0x00 "SYSCTRL_WAKEUP_PAD,WAKEUP Pad Register"
|
|
bitfld.long 0x00 0. " WAKEUP_PAD_VALUE ,WAKEUP pad value" "0,1"
|
|
base ad:0x40001350
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "ACS_WAKEUP_GP_DATA,Wakeup General Purpose Data Register"
|
|
width 0x0B
|
|
tree.end
|
|
tree "RST (Resets)"
|
|
base ad:0x40000200
|
|
width 18.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "DIG_RESET_STATUS,Reset Status Register"
|
|
bitfld.long 0x00 7. " LOCKUP_RESET_FLAG_CLEAR ,LOCKUP flag reset" "No reset,Reset"
|
|
bitfld.long 0x00 6. " WATCHDOG_RESET_FLAG_CLEAR ,Watchdog time-out reset flag reset" "No reset,Reset"
|
|
bitfld.long 0x00 5. " CM3_SW_RESET_FLAG_CLEAR ,CM3 software reset flag reset" "No reset,Reset"
|
|
newline
|
|
bitfld.long 0x00 4. " ACS_RESET_FLAG_CLEAR ,ACS reset flag reset" "No reset,Reset"
|
|
rbitfld.long 0x00 3. " LOCKUP_FLAG ,LOCKUP flag" "Not occurred,Occurred"
|
|
rbitfld.long 0x00 2. " WATCHDOG_RESET_FLAG ,Watchdog time-out reset flag" "Not occurred,Occurred"
|
|
newline
|
|
rbitfld.long 0x00 1. " CM3_SW_RESET_FLAG ,CM3 software reset flag" "Not occurred,Occurred"
|
|
rbitfld.long 0x00 0. " ACS_RESET_FLAG ,ACS reset flag" "Not occurred,Occurred"
|
|
group.long 0x1154++0x03
|
|
line.long 0x00 "ACS_RESET_STATUS,ACS Reset Source Status Register"
|
|
rbitfld.long 0x00 14. " TIMEOUT_RESET_FLAG ,Timeout in the power up sequence flag" "Not occurred,Occurred"
|
|
rbitfld.long 0x00 13. " CLK_DET_RESET_FLAG ,Clock detector reset flag" "Not occurred,Occurred"
|
|
rbitfld.long 0x00 12. " VDDA_RESET_FLAG ,VDDA reset flag" "Not occurred,Occurred"
|
|
newline
|
|
rbitfld.long 0x00 11. " VDDM_RESET_FLAG ,VDDM reset flag" "Not occurred,Occurred"
|
|
rbitfld.long 0x00 10. " VDDC_RESET_FLAG ,VDDC reset flag" "Not occurred,Occurred"
|
|
rbitfld.long 0x00 9. " PAD_RESET_FLAG ,Reset due to pad NRESET flag" "Not occurred,Occurred"
|
|
newline
|
|
rbitfld.long 0x00 8. " POR_RESET_FLAG ,POR reset flag" "Not occurred,Occurred"
|
|
bitfld.long 0x00 6. " TIMEOUT_RESET_FLAG_CLEAR ,TIMEOUT_RESET flag clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 5. " CLK_DET_RESET_FLAG_CLEAR ,CLK_DET_RESET flag clear" "Not cleared,Cleared"
|
|
newline
|
|
bitfld.long 0x00 4. " VDDA_RESET_FLAG_CLEAR ,VDDA_RESET flag clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 3. " VDDM_RESET_FLAG_CLEAR ,VDDM_RESET flag clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 2. " VDDC_RESET_FLAG_CLEAR ,VDDC_RESET flag clear" "Not cleared,Cleared"
|
|
newline
|
|
bitfld.long 0x00 1. " PAD_RESET_FLAG_CLEAR ,PAD_RESET flag clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 0. " POR_RESET_FLAG ,POR_RESET flag clear" "Not cleared,Cleared"
|
|
width 0x0B
|
|
tree.end
|
|
tree "ATS (Analog Test Signals)"
|
|
base ad:0x40001358
|
|
width 15.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "ACS_AOUT_CTRL,Analog Output Configuration Register"
|
|
bitfld.long 0x00 13. " RTC_CLOCK_DIO0_STOP_EDGE ,Stop edge for RTC clock output on AOUT" "Rising,Falling"
|
|
bitfld.long 0x00 11.--12. " RTC_CLOCK_DIO0_STOP_SRC ,Stop source for RTC clock output on AOUT" "DIO0,DIO1,DIO2,DIO3"
|
|
bitfld.long 0x00 8.--10. " RTC_CLOCK_DIO0_START ,Start event for RTC clock output on AOUT" "No event,Every 125 ms,Every 250 ms,Every 500 ms,Every 1 s,Every 2 s,Every 4 s,Every 8 s"
|
|
bitfld.long 0x00 0.--4. " TEST_AOUT ,AOUT test signal selection" "AOUT_VSSA,AOUT_VCC_SENSE,AOUT_VREF_0P75V_OUTPUT,AOUT_VREF_0P67V_OUTPUT,AOUT_IREF_50N_OUTPUT,AOUT_IREF_1N_OUTPUT,AOUT_VDDACS_OUTPUT,AOUT_VREF_0P75V_BUF_OUTPUT,AOUT_VREG_BG,AOUT_VDDRF_SW,AOUT_VDDRF_SENSE,AOUT_VDDT,AOUT_VDDC_SENSE,AOUT_VDDA_SW,AOUT_VDDA_SENSE,AOUT_VDDM_SENSE,AOUT_NC,AOUT_VDDPA_SENSE,AOUT_VDDPA_ISENSE,AOUT_TM0,AOUT_BG_READY,AOUT_VCC_READY,AOUT_DCDC_OVERLOAD,AOUT_DCDC_ACTIVATED,AOUT_VDDRF_READY,AOUT_VDDC_READY,AOUT_VDDM_READY,AOUT_VDDA_READY,AOUT_CLK_PRESENT,AOUT_XTAL_OK,AOUT_XTAL_CLK,AOUT_CLK_32K"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree.open "CLK (Clocking)"
|
|
tree "CGEN (Clock Generation)"
|
|
base ad:0x40001320
|
|
width 18.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "ACS_RCOSC_CTRL,RC Oscillator Configuration / Control Register"
|
|
bitfld.long 0x00 18. " CLOCK_MULT ,12 MHz startup oscillator mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " RC_OSC_EN ,32 kHz RC oscillator enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 15. " FTRIM_FLAG ,Trimming flag" "Not calibrated,Calibrated"
|
|
bitfld.long 0x00 8.--13. " FTRIM_START ,RC oscillator frequency trimming start" "-48 %,-46.5 %,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Nominal,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,+46.5 %"
|
|
newline
|
|
bitfld.long 0x00 6. " FTRIM_32K_ADJ ,32 kHz oscillator frequency range adjust" "Not adjusted,Adjusted"
|
|
bitfld.long 0x00 0.--5. " FTRIM_32K ,32 kHz RC oscillator frequency trimming" "-48 %,-46.5 %,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Nominal,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,+46.5 %"
|
|
line.long 0x04 "ACS_XTAL32K_CTRL,XTAL 32 kHz Configuration Register"
|
|
rbitfld.long 0x04 24. " READY ,XTAL ready status" "Not ready,Ready"
|
|
bitfld.long 0x04 18. " XIN_CAP_BYPASS_EN ,Added XIN serial cap bypass" "Not bypassed,Bypassed"
|
|
bitfld.long 0x04 17. " EN_AMPL_CTRL ,XTAL enable amplitude control" "Disabled,Enabled"
|
|
bitfld.long 0x04 16. " FORCE_READY ,XTAL 32K ready force" "Not forced,Forced"
|
|
newline
|
|
bitfld.long 0x04 8.--13. " CLOAD_TRIM ,XTAL load capacitance configuration" "0 pF,0.4 pF,,,,,,,,3.6 pF,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,25.2 pF"
|
|
bitfld.long 0x04 4.--7. " ITRIM ,XTAL current trimming" "20 nA,,,80 nA,,,,160 nA,,,,,,,,320 nA"
|
|
bitfld.long 0x04 1. " IBOOST ,XTAL current boosting (4x)" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " ENABLE ,XTAL 32 kHz oscillator enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "CDIS (Clock Distribution)"
|
|
base ad:0x40000100
|
|
width 15.
|
|
group.long 0x00++0x0F
|
|
line.long 0x00 "CLK_SYS_CFG,System Clock Configuration Register"
|
|
bitfld.long 0x00 16.--19. " JTCK_PRESCALE ,/Prescale value for the input clock from pad JTCK" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16"
|
|
bitfld.long 0x00 8.--11. " EXTCLK_PRESCALE ,/Prescale value for the input clock from pad EXTCLK" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16"
|
|
bitfld.long 0x00 0.--2. " SYSCLK_SRC_SEL ,Source of the system clock" "RCCLK,STANDBYCLK,RFCLK,EXTCLK,JTCK,?..."
|
|
line.long 0x04 "CLK_DIV_CFG0,SLOWCLK / BBCLK / USRCLK Clocks Prescale Register"
|
|
hexmask.long.word 0x04 16.--27. 1. " USRCLK_PRESCALE ,Prescale value for the USR clock"
|
|
bitfld.long 0x04 8.--10. " BBCLK_PRESCALE ,/Prescale value for the baseband peripheral clock" "/1,/2,/3,/4,/5,/6,/7,/8"
|
|
bitfld.long 0x04 0.--5. " SLOWCLK_PRESCALE ,Prescale value for the SLOWCLK clock" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16,/17,/18,/19,/20,/21,/22,/23,/24,/25,/26,/27,/28,/29,/30,/31,/32,/33,/34,/35,/36,/37,/38,/39,/40,/41,/42,/43,/44,/45,/46,/47,/48,/49,/50,/51,/52,/53,/54,/55,/56,/57,/58,/59,/60,/61,/62,/63,/64"
|
|
line.long 0x08 "CLK_DIV_CFG1,PWM Clock / UART / DMIC Clocks Prescale Register"
|
|
bitfld.long 0x08 30.--31. " AUDIOSLOWCLK_PRESCALE ,Prescale value for the slow audio clock down from the fast audio clock" "/1,/2,/3,/4"
|
|
bitfld.long 0x08 24.--29. " AUDIOCLK_PRESCALE ,Prescale value for the fast audio clock" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16,/17,/18,/19,/20,/21,/22,/23,/24,/25,/26,/27,/28,/29,/30,/31,/32,/33,/34,/35,/36,/37,/38,/39,/40,/41,/42,/43,/44,/45,/46,/47,/48,/49,/50,/51,/52,/53,/54,/55,/56,/57,/58,/59,/60,/61,/62,/63,/64"
|
|
bitfld.long 0x08 16.--20. " UARTCLK_PRESCALE ,/Prescale value for the UART peripheral clock" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16,/17,/18,/19,/20,/21,/22,/23,/24,/25,/26,/27,/28,/29,/30,/31,/32"
|
|
bitfld.long 0x08 8.--13. " PWM1CLK_PRESCALE ,Prescale value for the PWM1 peripheral clock" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16,/17,/18,/19,/20,/21,/22,/23,/24,/25,/26,/27,/28,/29,/30,/31,/32,/33,/34,/35,/36,/37,/38,/39,/40,/41,/42,/43,/44,/45,/46,/47,/48,/49,/50,/51,/52,/53,/54,/55,/56,/57,/58,/59,/60,/61,/62,/63,/64"
|
|
newline
|
|
bitfld.long 0x08 0.--5. " PWM0CLK_PRESCALE ,Prescale value for the PWM0 peripheral clock" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16,/17,/18,/19,/20,/21,/22,/23,/24,/25,/26,/27,/28,/29,/30,/31,/32,/33,/34,/35,/36,/37,/38,/39,/40,/41,/42,/43,/44,/45,/46,/47,/48,/49,/50,/51,/52,/53,/54,/55,/56,/57,/58,/59,/60,/61,/62,/63,/64"
|
|
line.long 0x0C "CLK_DIV_CFG2,DC-DC Converter / Charge Pump Clocks Prescale Register"
|
|
bitfld.long 0x0C 15. " CPCLK_DISABLE ,Charge pump clock disable" "No,Yes"
|
|
bitfld.long 0x0C 8.--13. " CPCLK_PRESCALE ,Prescale value for the charge pump clock from the SLOWCLK clock" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16,/17,/18,/19,/20,/21,/22,/23,/24,/25,/26,/27,/28,/29,/30,/31,/32,/33,/34,/35,/36,/37,/38,/39,/40,/41,/42,/43,/44,/45,/46,/47,/48,/49,/50,/51,/52,/53,/54,/55,/56,/57,/58,/59,/60,/61,/62,/63,/64"
|
|
bitfld.long 0x0C 7. " DCCLK_DISABLE ,DC-DC converter clock disable" "No,Yes"
|
|
bitfld.long 0x0C 0.--5. " DCCLK_PRESCALE ,Prescale value for the DC-DC converter clock" "/1,/2,/3,/4,/5,/6,/7,/8,/9,/10,/11,/12,/13,/14,/15,/16,/17,/18,/19,/20,/21,/22,/23,/24,/25,/26,/27,/28,/29,/30,/31,/32,/33,/34,/35,/36,/37,/38,/39,/40,/41,/42,/43,/44,/45,/46,/47,/48,/49,/50,/51,/52,/53,/54,/55,/56,/57,/58,/59,/60,/61,/62,/63,/64"
|
|
base ad:0x40001330
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "ACS_RTC_CFG,RTC Timer Counter Preload Register"
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "ACS_RTC_COUNT,RTC Timer Counter Current Value Register"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "ACS_RTC_CTRL,RTC Control Register"
|
|
bitfld.long 0x00 25. " FORCE_CLOCK ,Force a clock on RTC timer" "No effect,Forced"
|
|
bitfld.long 0x00 24. " RESET ,RTC timer reset" "No effect,Reset"
|
|
bitfld.long 0x00 4.--7. " ALARM_CFG ,RTC timer alarm configuration" "Disabled,7.8125 ms,15.625 ms,31.25 ms,62.5 ms,125 ms,250 ms,500 ms,1 s,2 s,4 s,8 s,16 s,32 s,64 s,Up to 36.4 hours"
|
|
bitfld.long 0x00 1.--3. " CLK_SRC_SEL ,RTC / standby / bb timer clock source selection" "Internal RC oscillator,Internal XTAL 32 kHz,,,DIO0,DIO1,DIO2,DIO3"
|
|
newline
|
|
bitfld.long 0x00 0. " ENABLE ,Counter and RTC interrupt every 1 s enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "CDET (Clock Detection)"
|
|
base ad:0x40000110
|
|
width 18.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CLK_DET_CFG,External Clock Detector Configuration Register"
|
|
bitfld.long 0x00 5. " CLK_DET_SEL ,Clock detector source selection" "EXTCLK,JTCK"
|
|
bitfld.long 0x00 3.--4. " CLK_DET_INT_SEL ,Clock detector interrupt configuration" "Disabled,Activated,Deactivated,Activity changed"
|
|
bitfld.long 0x00 1.--2. " CLK_DET_DIV ,Clock detector configuration" "/32,/64,/96,/128"
|
|
bitfld.long 0x00 0. " CLK_DET_ENABLE ,Clock detector enable" "Disabled,Enabled"
|
|
newline
|
|
hgroup.long 0x04++0x03
|
|
hide.long 0x00 "CLK_DET_STATUS,External Clock Detector Status Register"
|
|
in
|
|
newline
|
|
base ad:0x4000132C
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "ACS_CLK_DET_CTRL,Clock Detector Configuration Register"
|
|
rbitfld.long 0x00 8. " CLOCK_PRESENT ,Clock present" "Not present,Present"
|
|
bitfld.long 0x00 1. " RESET_IGNORE ,Clock detector reset condition ignore" "Not ignored,Ignored"
|
|
bitfld.long 0x00 0. " ENABLE ,Clock detector enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree.open "MEM (Memory)"
|
|
tree "MEMR (Memory Registers)"
|
|
base ad:0x40000008
|
|
width 27.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "SYSCTRL_FLASH_OVERLAY_CFG,Flash Memory / PRAM / DSPPRAM Overlay Control Register"
|
|
bitfld.long 0x00 7. " DSP_PRAM0_OVERLAY_CFG ,DSP_PRAM0 flash overlay configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " DSP_PRAM1_OVERLAY_CFG ,DSP_PRAM1 flash overlay configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " DSP_PRAM2_OVERLAY_CFG ,DSP_PRAM2 flash overlay configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " DSP_PRAM3_OVERLAY_CFG ,DSP_PRAM3 flash overlay configuration" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 3. " PRAM3_OVERLAY_CFG ,PRAM3 flash overlay configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PRAM2_OVERLAY_CFG ,PRAM2 flash overlay configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PRAM1_OVERLAY_CFG ,PRAM1 flash overlay configuration" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PRAM0_OVERLAY_CFG ,PRAM0 flash overlay configuration" "Disabled,Enabled"
|
|
group.long 0x38++0x03
|
|
line.long 0x00 "SYSCTRL_FLASH_READ_CNT,Flash Memory Read Configuration Register"
|
|
width 0x0B
|
|
tree.end
|
|
tree "FMR (Flash Memory Registers)"
|
|
base ad:0x40000500
|
|
width 27.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "FLASH_IF_CTRL,Flash Interface Control Register"
|
|
bitfld.long 0x00 18. " PREFETCH_D_BUS ,Pre-fetch on D-Bus control" "Not pre-fetched,Pre-fetched"
|
|
bitfld.long 0x00 17. " PREFETCH_I_BUS ,Pre-fetch on I-Bus control" "Not pre-fetched,Pre-fetched"
|
|
bitfld.long 0x00 16. " NOT_LOAD_AUTO ,Automatic load of the configuration registers and the patch information disable" "No,Yes"
|
|
newline
|
|
bitfld.long 0x00 12. " VREAD1_MODE ,VREAD1 mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 11. " VREAD0_MODE ,VREAD0 mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " RECALL ,Flash recall enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8.--9. " RETRY ,Erase retry iteration configuration" "1st erase pulse,2nd erase pulse,3rd erase pulse,4th erase pulse / during programming"
|
|
bitfld.long 0x00 0. " LP_MODE ,Low power mode enable" "Disabled,Enabled"
|
|
newline
|
|
wgroup.long 0x04++0x03
|
|
line.long 0x00 "FLASH_MAIN_WRITE_UNLOCK,Flash Main Write Unlock Register"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "FLASH_MAIN_CTRL,Flash Main Write Control Register"
|
|
bitfld.long 0x00 2. " MAIN_HIGH_W_EN ,High part of the flash main block write enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " MAIN_MIDDLE_W_EN ,Middle part of the flash main block write enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " MAIN_LOW_W_EN ,Lower part of the flash main block write enable" "Disabled,Enabled"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FLASH_DELAY_CTRL,Flash / Memory / RF Power-Up Delay Configuration Register"
|
|
bitfld.long 0x00 7. " READ_MARGIN ,Flash read access time margin" "Default,Fast"
|
|
bitfld.long 0x00 0.--3. " SYSCLK_FREQ ,Flash / memory / RF power-up delays" "For SYSCLK = 3 MHz,For SYSCLK = 4 MHz,For SYSCLK = 5 MHz,For SYSCLK = 8 MHz,For SYSCLK = 10 MHz,For SYSCLK = 12 MHz,For SYSCLK = 16 MHz,For SYSCLK = 20 MHz,For SYSCLK = 24 MHz,For SYSCLK = 48 MHz,?..."
|
|
if (((per.l(ad:0x40000500+0x34))&0x1F)==0x00)
|
|
group.long 0x34++0x03
|
|
line.long 0x00 "FLASH_CMD_CTRL,Flash Command Control Register"
|
|
rbitfld.long 0x00 5.--6. " CMD_END ,Active flash command termination" "0,1,2,3"
|
|
bitfld.long 0x00 0.--4. " COMMAND ,Flash access command" "CMD_IDLE,CMD_WAKE_UP,CMD_LOAD_TRIM,,,CMD_READ,CMD_PROGRAM_NOSEQ,CMD_PROGRAM_SEQ,CMD_SECTOR_ERASE,CMD_MASS_ERASE,CMD_SET_LOW_POWER,CMD_UNSET_LOW_POWER,CMD_SET_RECALL,CMD_UNSET_RECALL,CMD_SET_VREAD1,CMD_UNSET_VREAD1,CMD_SET_VREAD0,CMD_UNSET_VREAD0,CMD_WRITE_USER_RED1,CMD_WRITE_USER_RED2,?..."
|
|
else
|
|
rgroup.long 0x34++0x03
|
|
line.long 0x00 "FLASH_CMD_CTRL,Flash Command Control Register"
|
|
bitfld.long 0x00 5.--6. " CMD_END ,Active flash command termination" "0,1,2,3"
|
|
bitfld.long 0x00 0.--4. " COMMAND ,Flash access command" "CMD_IDLE,CMD_WAKE_UP,CMD_LOAD_TRIM,,,CMD_READ,CMD_PROGRAM_NOSEQ,CMD_PROGRAM_SEQ,CMD_SECTOR_ERASE,CMD_MASS_ERASE,CMD_SET_LOW_POWER,CMD_UNSET_LOW_POWER,CMD_SET_RECALL,CMD_UNSET_RECALL,CMD_SET_VREAD1,CMD_UNSET_VREAD1,CMD_SET_VREAD0,CMD_UNSET_VREAD0,CMD_WRITE_USER_RED1,CMD_WRITE_USER_RED2,?..."
|
|
endif
|
|
rgroup.long 0x38++0x03
|
|
line.long 0x00 "FLASH_IF_STATUS,Flash Interface Status Register"
|
|
bitfld.long 0x00 13. " TRIMMED_STATUS ,Flash trimming status" "Untrimmed,Trimmed"
|
|
bitfld.long 0x00 12. " ISOLATE_STATUS ,Flash isolate status" "Accessible,Isolate"
|
|
bitfld.long 0x00 11. " PROG_SEQ_DATA_REQ ,New data request in sequential program mode" "Not requested,Requested"
|
|
newline
|
|
bitfld.long 0x00 10. " BUSY ,Flash interface busy" "Idle,Busy"
|
|
bitfld.long 0x00 9. " RED2_W_UNLOCK ,Flash RED2 write unlock status" "Locked,Unlocked"
|
|
bitfld.long 0x00 8. " RED1_W_UNLOCK ,Flash RED1 write unlock status" "Locked,Unlocked"
|
|
newline
|
|
bitfld.long 0x00 6. " NVR3_W_UNLOCK ,Flash NVR3 write unlock status" "Locked,Unlocked"
|
|
bitfld.long 0x00 5. " NVR2_W_UNLOCK ,Flash NVR2 write unlock status" "Locked,Unlocked"
|
|
bitfld.long 0x00 4. " NVR1_W_UNLOCK ,Flash NVR1 write unlock status" "Locked,Unlocked"
|
|
newline
|
|
bitfld.long 0x00 2. " MAIN_HIGH_W_UNLOCK ,High part of the flash main block write unlock status" "Locked,Unlocked"
|
|
bitfld.long 0x00 1. " MAIN_MIDDLE_W_UNLOCK ,Middle part of the flash main block write unlock status" "Locked,Unlocked"
|
|
bitfld.long 0x00 0. " MAIN_LOW_W_UNLOCK ,Lower part of the flash main block write unlock status" "Locked,Unlocked"
|
|
group.long 0x3C++0x07
|
|
line.long 0x00 "FLASH_ADDR,Flash Address Register"
|
|
hexmask.long.tbyte 0x00 2.--20. 0x04 " FLASH_ADDR ,Flash byte address"
|
|
line.long 0x04 "FLASH_DATA,Flash Read / Write Data Register"
|
|
wgroup.long 0x48++0x03
|
|
line.long 0x00 "FLASH_NVR_WRITE_UNLOCK,Flash NVR Write Unlock Register"
|
|
group.long 0x4C++0x03
|
|
line.long 0x00 "FLASH_NVR_CTRL,Flash NVR Control Register"
|
|
bitfld.long 0x00 3. " NVR3_W_EN ,NVR3 sector write enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " NVR2_W_EN ,NVR2 sector write enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " NVR1_W_EN ,NVR1 sector write enable" "Disabled,Enabled"
|
|
group.long 0x68++0x03
|
|
line.long 0x00 "FLASH_PATCH_ADDR,Flash Patch Address Register"
|
|
hexmask.long.word 0x00 11.--20. 0x08 " PATCH_ADDR ,Flash patch address"
|
|
group.long 0x80++0x03
|
|
line.long 0x00 "FLASH_COPY_CFG,Flash Copier Configuration Register"
|
|
bitfld.long 0x00 18. " COMP_ADDR_STEP ,Comparator address increment/decrement" "By 1,By 2"
|
|
bitfld.long 0x00 17. " COMP_ADDR_DIR ,Comparator address-up or address-down" "Down,Up"
|
|
bitfld.long 0x00 16. " COMP_MODE ,Comparator mode" "eFlash DOUT,FLASH_DATA"
|
|
newline
|
|
bitfld.long 0x00 9. " COPY_DEST ,Copier destination" "Memory,CRC"
|
|
bitfld.long 0x00 8. " COPY_MODE ,Copier mode" "32-bit,40-bit"
|
|
bitfld.long 0x00 0. " MODE ,Copier or comparator mode configuration" "Copier,Comparator"
|
|
group.long 0xC8++0x03
|
|
line.long 0x00 "FLASH_COPY_CTRL,Flash-To-Memory Copier Control And Status Register"
|
|
rbitfld.long 0x00 3. " ERROR ,Error status" "No error,Error"
|
|
bitfld.long 0x00 2. " STOP ,Transfer stop" "No effect,Stop"
|
|
bitfld.long 0x00 1. " START ,Transfer start" "No effect,Start"
|
|
newline
|
|
rbitfld.long 0x00 0. " BUSY ,Busy status" "Idle,Busy"
|
|
group.long 0xD0++0x13
|
|
line.long 0x00 "FLASH_COPY_SRC_ADDR_PTR,Flash-To-Memory Copier Source Address Pointer Register"
|
|
hexmask.long.tbyte 0x00 0.--20. 0x01 " COPY_SRC_ADDR_PTR ,Source address pointer"
|
|
line.long 0x04 "FLASH_COPY_DST_ADDR_PTR,Flash-To-Memory Copier Destination Address Pointer Register"
|
|
hexmask.long 0x04 2.--31. 0x04 " COPY_DST_ADDR_PTR ,Destination address pointer"
|
|
line.long 0x08 "FLASH_COPY_WORD_CNT,Flash-To-Memory Copier Word Count Register"
|
|
hexmask.long.tbyte 0x08 0.--16. 1. " COPY_WORD_CNT ,Number of words to copy / compare"
|
|
line.long 0x0C "FLASH_ECC_CTRL,Flash ECC Control Register"
|
|
hexmask.long.byte 0x0C 8.--15. 1. " ECC_COR_CNT_INT_THRESHOLD ,Number of corrected errors before sending an ARM Cortex-M3 core interrupt selection"
|
|
bitfld.long 0x0C 3. " COPIER_ECC_CTRL ,ECC during reading flash through flash copier enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 2. " CMD_ECC_CTRL ,ECC during reading flash through flash mapped register enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x0C 0. " IDBUS_ECC_CTRL ,ECC during reading flash through I-Bus and D-Bus enable" "Disabled,Enabled"
|
|
line.long 0x10 "FLASH_ECC_STATUS,Flash ECC Status Register"
|
|
bitfld.long 0x10 6. " ECC_COR_ERROR_CNT_CLEAR ,Flash corrected errors counter reset" "No effect,Reset"
|
|
bitfld.long 0x10 5. " ECC_UNCOR_ERROR_CNT_CLEAR ,Flash uncorrected errors counter reset" "No effect,Reset"
|
|
bitfld.long 0x10 4. " ECC_ERROR_ADDR_CLEAR ,Flash address of the last detected error reset" "No effect,Reset"
|
|
newline
|
|
rbitfld.long 0x10 1. " ECC_COR_ERROR_CNT_STATUS ,FLASH_ECC_ERROR_COR_CNT current value" "0,1"
|
|
rbitfld.long 0x10 0. " ECC_UNCOR_ERROR_CNT_STATUS ,FLASH_ECC_ERROR_UNCOR_CNT current value" "0,1"
|
|
rgroup.long 0xE4++0x0B
|
|
line.long 0x00 "FLASH_ECC_ERROR_ADDR,Flash Address Of The Latest Detected Error Register"
|
|
hexmask.long.tbyte 0x00 2.--20. 0x04 " ECC_ERROR_ADDR ,Flash address of the latest flash ECC error"
|
|
line.long 0x04 "FLASH_ECC_UNCOR_ERROR_CNT,Flash ECC Uncorrected Error Counter Register"
|
|
hexmask.long.byte 0x04 0.--7. 1. " ECC_UNCOR_ERROR_CNT ,Flash ECC uncorrected error counter"
|
|
line.long 0x08 "FLASH_ECC_COR_ERROR_CNT,Flash ECC Corrected Error Counter Register"
|
|
hexmask.long.byte 0x08 0.--7. 1. " ECC_COR_ERROR_CNT ,Flash ECC corrected error counter"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree.open "RFFE (RF Front-End)"
|
|
tree "RFOVR (RF Front-End Overview)"
|
|
base ad:0x40000050
|
|
width 23.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "SYSCTRL_RF_POWER_CFG,RF Power Configuration Register"
|
|
bitfld.long 0x00 0. " RF_POWER ,RF power enable" "Disabled,Enabled"
|
|
line.long 0x04 "SYSCTRL_RF_ACCESS_CFG,RF Access Configuration Register"
|
|
bitfld.long 0x04 1. " RF_IRQ_ACCESS ,RF IRQ access enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " RF_ACCESS ,RF access enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "RFFER (RF Front-End Registers)"
|
|
base ad:0x40010000
|
|
width 19.
|
|
group.long 0x00++0xB3
|
|
line.long 0x00 "RF_REG00,RF Register 00"
|
|
bitfld.long 0x00 31. " DATAWHITE_BTLE_DW_BTLE ,Use data whitening specified in the Bluetooth LE standard" "Not used,Used"
|
|
hexmask.long.byte 0x00 24.--30. 1. " DATAWHITE_BTLE_DW_BTLE_RST ,Reset value for the Bluetooth LE data whitening shift register"
|
|
newline
|
|
bitfld.long 0x00 23. " FOURFSK_CODING_EN_FOURFSK_CODING ,4-FSK coding activation" "Not activated,Activated"
|
|
bitfld.long 0x00 22. " FOURFSK_CODING_TX_FOURFSK_CODING[2] ,Signal determining sign selection for TX" "Q,I"
|
|
newline
|
|
bitfld.long 0x00 21. " [1] ,Signal inversion for the sign for TX" "Not inverted,Inverted"
|
|
bitfld.long 0x00 20. " [0] ,Signal inversion for the abs amplitude for TX" "Not inverted,Inverted"
|
|
newline
|
|
bitfld.long 0x00 18. " FOURFSK_CODING_RX_FOURFSK_CODING[2] ,Signal determining sign selection for RX" "Q,I"
|
|
bitfld.long 0x00 17. " [1] ,Signal inversion for the sign for RX" "Not inverted,Inverted"
|
|
newline
|
|
bitfld.long 0x00 16. " [0] ,Signal inversion for the abs amplitude for RX" "Not inverted,Inverted"
|
|
bitfld.long 0x00 14. " MODE2_DIFF_CODING ,Differential coding/decoding enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 13. " MODE2_PSK_NFSK ,PSK/FSK mode selection" "FSK,PSK"
|
|
bitfld.long 0x00 8.--12. " MODE2_TESTMODE ,Output testmode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
newline
|
|
bitfld.long 0x00 7. " MODE_NOT_TO_IDLE ,FSM going in suspend mode after a TX / RX packet" "Not going,Going"
|
|
bitfld.long 0x00 5. " MODE_EN_FSM ,Radio FSM enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 4. " MODE_EN_DESERIALIZER ,Deserializer enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " MODE_EN_SERIALIZER ,Serializer enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 2. " MODE_TX_NRX ,TX/RX mode selection" "RX,TX"
|
|
bitfld.long 0x00 0.--1. " MODE_MODE ,working mode of the digital baseband" "Off,Block reset,Frozen,Working"
|
|
line.long 0x04 "RF_REG01,RF Register 01"
|
|
hexmask.long.byte 0x04 24.--31. 1. " TAU_PHASE_RECOV_TAU_PHASE_RECOV ,Time constant of the fine carrier recovery block"
|
|
hexmask.long.byte 0x04 16.--23. 1. " TAU_ROUGH_RECOV_TAU_ROUGH_RECOV ,Time constant of the rough carrier recovery block"
|
|
newline
|
|
bitfld.long 0x04 15. " CARRIER_RECOVERY_EN_CORRECT_CFREQ_AFC ,Automatic AFC correction enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 14. " CARRIER_RECOVERY_CORRECT_CFREQ_IF_NEG ,IF correction negativeness" "Not negative,Negative"
|
|
newline
|
|
bitfld.long 0x04 13. " CARRIER_RECOVERY_EN_CORRECT_CFREQ_IF ,Automatic IF correction enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 12. " CARRIER_RECOVERY_AFC_NEG ,Negative AFC correction" "Not corrected,Corrected"
|
|
newline
|
|
bitfld.long 0x04 11. " CARRIER_RECOVERY_STARTER_MODE ,Starter mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 10. " CARRIER_RECOVERY_EN_AFC ,AFC enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 9. " CARRIER_RECOVERY_EN_FINE_RECOV ,Fine carrier recovery enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 8. " CARRIER_RECOVERY_EN_ROUGH_RECOV ,Rough carrier recovery enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 6. " MOD_TX_PULSE_NSYM ,TX pulse shape function oddness" "Not odd,Odd"
|
|
bitfld.long 0x04 5. " MOD_TX_EN_INTERP ,TX CIC interpolator enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 0.--4. " MOD_TX_CK_TX_M ,TX interpolator frequency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
line.long 0x08 "RF_REG02,RF Register 02"
|
|
bitfld.long 0x08 31. " FIFO_FIFO_FLUSH_ON_OVFLW ,RX stop and FIFO flush in case of overflow" "No,Yes"
|
|
bitfld.long 0x08 30. " FIFO_FIFO_FLUSH_ON_ADDR_ERR ,RX stop and FIFO flush in case of address error" "No,Yes"
|
|
newline
|
|
bitfld.long 0x08 29. " FIFO_FIFO_FLUSH_ON_PL_ERR ,RX stop and FIFO flush in case of packet length error" "No,Yes"
|
|
bitfld.long 0x08 28. " FIFO_FIFO_FLUSH_ON_CRC_ERR ,RX stop and FIFO flush in case of CRC error" "No,Yes"
|
|
newline
|
|
bitfld.long 0x08 27. " FIFO_RX_FIFO_ACK ,RX FIFO acknowledgment need to change its state" "Not needed,Needed"
|
|
bitfld.long 0x08 24.--26. " FIFO_FIFO_THR ,Threshold indicating the almost full state" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
hexmask.long.byte 0x08 16.--23. 1. " DATARATE_OFFSET_DATARATE_OFFSET ,Data-rate offset"
|
|
hexmask.long.byte 0x08 8.--15. 1. " TAU_DATARATE_RECOV_TAU_DATARATE_RECOV ,Time constant of the data-rate recovery"
|
|
newline
|
|
hexmask.long.byte 0x08 0.--7. 1. " TAU_CLK_RECOV_TAU_CLK_RECOV ,Time constant of the clock recovery"
|
|
line.long 0x0C "RF_REG03,RF Register 03"
|
|
bitfld.long 0x0C 28.--31. " PAD_CONF_2_PAD_3_CONF ,GPIO pad 3 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 24.--27. " PAD_CONF_2_PAD_2_CONF ,GPIO pad 2 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x0C 20.--23. " PAD_CONF_1_PAD_1_CONF ,GPIO pad 1 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 16.--19. " PAD_CONF_1_PAD_0_CONF ,GPIO pad 0 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x0C 15. " IRQ_CONF_IRQ_HIGH_Z ,Set pads to high-z when the IRQ is not active" "Not set,Set"
|
|
bitfld.long 0x0C 14. " IRQ_CONF_IRQ_ACTIVE_LOW ,IRQ activeness type" "Active high,Active low"
|
|
newline
|
|
bitfld.long 0x0C 13. " IRQ_CONF_IRQS_MASK[5:0] ,RF_RXFIFO_IRQ interrupt mask" "0,1"
|
|
bitfld.long 0x0C 12. ",RF_TXFIFO_IRQ interrupt mask" "0,1"
|
|
bitfld.long 0x0C 11. ",RF_SYNC_IRQ interrupt mask" "0,1"
|
|
bitfld.long 0x0C 10. ",RF_IRQ_RECEIVED_IRQ interrupt mask" "0,1"
|
|
bitfld.long 0x0C 9. ",RF_RXSTOP_IRQ interrupt mask" "0,1"
|
|
bitfld.long 0x0C 8. ",RF_TX_IRQ interrupt mask" "0,1"
|
|
newline
|
|
bitfld.long 0x0C 5.--7. " FIFO_2_FIFO_THR_TX ,Threshold indicating the almost empty state" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x0C 4. " FIFO_2_WAIT_TXFIFO_WR ,FSM wait a TX FIFO write before starting the TX in case of an empty TX FIFO" "Not waited,Waited"
|
|
newline
|
|
bitfld.long 0x0C 3. " FIFO_2_STOP_ON_RXFF_OVFLW ,Reception stop in case of a FIFO overflow" "Not stopped,Stopped"
|
|
bitfld.long 0x0C 2. " FIFO_2_STOP_ON_TXFF_UNFLW ,Transmission stop in case of a FIFO underflow" "Not stopped,Stopped"
|
|
newline
|
|
bitfld.long 0x0C 1. " FIFO_2_RXFF_FLUSH_ON_START ,RX FIFO flush when the RX is enabled" "Not flushed,Flushed"
|
|
bitfld.long 0x0C 0. " FIFO_2_TXFF_FLUSH_ON_STOP ,TX FIFO flush after the end of a packet transmission" "Not flushed,Flushed"
|
|
line.long 0x10 "RF_REG04,RF Register 04"
|
|
bitfld.long 0x10 30.--31. " MAC_CONF_MAC_TIMER_GR ,MAC timer granularity" "1 us,2 us,4 us,8 us"
|
|
bitfld.long 0x10 29. " MAC_CONF_RX_MAC_ACT ,FSM switch to RX or TX after an RX mode" "Not switched,Switched"
|
|
newline
|
|
bitfld.long 0x10 28. " MAC_CONF_RX_MAC_TX_NRX ,FSM switch after an RX mode selection" "RX,TX"
|
|
bitfld.long 0x10 27. " MAC_CONF_RX_MAC_START_NSTOP ,MAC timer activation trigger" "Sync word reception,End of the packet"
|
|
newline
|
|
bitfld.long 0x10 26. " MAC_CONF_TX_MAC_ACT ,FSM switch to RX or TX after an TX mode" "Not switched,Switched"
|
|
bitfld.long 0x10 25. " MAC_CONF_TX_MAC_TX_NRX ,FSM switch after an TX mode selection" "RX,TX"
|
|
newline
|
|
bitfld.long 0x10 24. " MAC_CONF_TX_MAC_START_NSTOP ,MAC timer activation trigger" "Beginning of the packet,End of the packet"
|
|
bitfld.long 0x10 20.--23. " PAD_CONF_5_PAD_9_CONF ,GPIO pad 9 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x10 16.--19. " PAD_CONF_5_PAD_8_CONF ,GPIO pad 8 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x10 12.--15. " PAD_CONF_4_PAD_7_CONF ,GPIO pad 7 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x10 8.--11. " PAD_CONF_4_PAD_6_CONF ,GPIO pad 6 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x10 4.--7. " PAD_CONF_3_PAD_5_CONF ,GPIO pad 5 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x10 0.--3. " PAD_CONF_2_PAD_4_CONF ,GPIO pad 4 configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x14 "RF_REG05,RF Register 05"
|
|
bitfld.long 0x14 30. " CHANNEL_SWITCH_IQ ,I and Q channels switch" "Not switched,Switched"
|
|
bitfld.long 0x14 24.--29. " CHANNEL_CHANNEL ,Channel number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
newline
|
|
bitfld.long 0x14 18. " BANK_DATARATE_TX_NRX ,Data-rate register selection" "RX data-rate,TX data-rate"
|
|
bitfld.long 0x14 16.--17. " BANK_BANK ,used bank selection" "0,1,2,3"
|
|
newline
|
|
hexmask.long.byte 0x14 8.--15. 1. " TX_MAC_TIMER_TX_MAC_TIMER ,Time to wait after the TX mode"
|
|
hexmask.long.byte 0x14 0.--7. 1. " RX_MAC_TIMER_RX_MAC_TIMER ,Time to wait after the RX mode"
|
|
line.long 0x18 "RF_CENTER_FREQ,RF Center Frequency Register"
|
|
bitfld.long 0x18 31. " CENTER_FREQ_ADAPT_CFREQ ,Automatic adaptation of frequency between TX and RX" "Not adapted,Adapted"
|
|
bitfld.long 0x18 30. " CENTER_FREQ_RX_DIV_5_N6 ,PLL reference ratio between TX and RX selection" "6,5"
|
|
newline
|
|
hexmask.long 0x18 0.--29. 1. " CENTER_FREQ_CENTER_FREQUENCY ,Center frequency"
|
|
hexmask.long 0x18 0.--29. 1. " CENTER_FREQ_CENTER_FREQUENCY ,Center frequency"
|
|
line.long 0x1C "RF_REG07,RF Register 07"
|
|
hexmask.long.word 0x1C 16.--31. 1. " CHANNELS_1_CHANEL_SPACING_LO ,Channel spacing"
|
|
bitfld.long 0x1C 14. " MOD_INFO_RX_EN_DIV_2_N3_RX ,RX clock divider selection" "/3,/2"
|
|
newline
|
|
bitfld.long 0x1C 13. " MOD_INFO_RX_SYMBOL_2BIT_RX ,Compose each RX symbol by 2 bits" "Not composed,Composed"
|
|
bitfld.long 0x1C 8.--12. " MOD_INFO_RX_DR_M_RX ,RX oversampling frequency division factor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
newline
|
|
bitfld.long 0x1C 6. " MOD_INFO_TX_EN_DIV_2_N3_TX ,TX clock divider selection" "/3,/2"
|
|
bitfld.long 0x1C 5. " MOD_INFO_TX_SYMBOL_2BIT_TX ,Compose each TX symbol by 2 bits" "Not composed,Composed"
|
|
newline
|
|
bitfld.long 0x1C 0.--4. " MOD_INFO_TX_DR_M_TX ,TX oversampling frequency division factor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
line.long 0x20 "RF_REG08,RF Register 08"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PACKET_LENGTH_PACKET_LEN ,Packet length in the fixed packet length mode"
|
|
bitfld.long 0x20 23. " PACKET_HANDLING_LSB_FIRST ,Bit order sending mode" "MSB,LSB"
|
|
newline
|
|
bitfld.long 0x20 22. " PACKET_HANDLING_EN_CRC ,Automatic CRC evaluation and insertion enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 21. " PACKET_HANDLING_EN_CRC_ON_PKTLEN ,CRC calculation on the packet length part of the packet enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x20 20. " PACKET_HANDLING_EN_PREAMBLE ,Automatic preamble insertion enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 19. " PACKET_HANDLING_EN_MULTI_FRAME ,Multi-frame packet enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x20 18. " PACKET_HANDLING_ENB_DW_ON_CRC ,Data-whitening on the CRC enable" "Enabled,Disabled"
|
|
bitfld.long 0x20 17. " PACKET_HANDLING_EN_PATTERN ,Automatic pattern insertion and recognition enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x20 16. " PACKET_HANDLING_EN_PACKET ,Packet handler enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 15. " CODING_EN_DATAWHITE ,Data-whitening enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x20 14. " CODING_I_NQ_DELAYED ,Consider channel I delayed in case of a 2bit per symbol modulation" "Not considered,Considered"
|
|
bitfld.long 0x20 13. " CODING_OFFSET ,Introduce offset in one of the two channels for 2 bits per symbol modulation" "Not introduced,Introduced"
|
|
newline
|
|
bitfld.long 0x20 12. " CODING_BIT_INVERT ,Invert bit value for TX and RX" "Not inverted,Inverted"
|
|
bitfld.long 0x20 11. " CODING_EVEN_BEFORE_ODD ,Bit order in case of a 2 bits per symbol modulation" "Odd before even,Even before odd"
|
|
newline
|
|
bitfld.long 0x20 10. " CODING_EN_802154_L2F ,Linear to frequency encoding enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 9. " CODING_EN_802154_B2C ,Bit to chips encoding enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x20 8. " CODING_EN_MANCHESTER ,Manchester encoding enable" "Disabled,Enabled"
|
|
bitfld.long 0x20 7. " CHANNELS_2_EN_CHANNEL_SEL ,Definition of channels enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x20 0.--3. " CHANNELS_2_CHANNEL_SPACING_HI ,Channel spacing" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x24 "RF_REG09,RF Register 09"
|
|
bitfld.long 0x24 27. " ADDRESS_CONF_ADDRESS_LEN ,Address length" "8 bits,16 bits"
|
|
bitfld.long 0x24 26. " ADDRESS_CONF_EN_ADDRESS_RX_BR ,Broadcast address detection on RX enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x24 25. " ADDRESS_CONF_EN_ADDRESS_RX ,Address detection on RX enable" "Disabled,Enabled"
|
|
bitfld.long 0x24 24. " ADDRESS_CONF_EN_ADDRESS_TX ,Address insertion on TX enable" "Disabled,Enabled"
|
|
newline
|
|
hexmask.long.byte 0x24 16.--23. 1. " PREAMBLE_LENGTH_PREAMBLE_LEN ,Length of the preamble - 1"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PREAMBLE_PREAMBLE ,Preamble to be inserted"
|
|
newline
|
|
bitfld.long 0x24 6. " PACKET_LENGTH_OPTS_EN_PACKET_LEN-FIX ,Packet length fix" "Not fixed,Fixed"
|
|
bitfld.long 0x24 2.--5. " PACKET_LENGTH_OPTS_PACKET_LEN_CORR ,Correction value to apply to the specified packet length" "-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x24 0.--1. " PACKET_LENGTH_OPTS_PACKET_LEN_POS ,Packet length position after packet" "-2,-1,0,1"
|
|
line.long 0x28 "RF_REG0A,RF Register 0A"
|
|
hexmask.long.word 0x28 16.--31. 0x01 " ADDRESS_BROADCAST_ADDRESS_BR ,Broadcast address"
|
|
hexmask.long.word 0x28 0.--15. 0x01 " ADDRESS_ADDRESS ,Node address"
|
|
line.long 0x2C "RF_SYNC_PATTERN,RF Sync Patter Register"
|
|
line.long 0x30 "RF_REG0C,RF Register 0C"
|
|
bitfld.long 0x30 26.--30. " CONV_CODES_POLY_CC_POLY_2 ,Polynom of the third convolutional code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x30 21.--25. " CONV_CODES_POLY_CC_POLY_1 ,Polynom of the second convolutional code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
newline
|
|
bitfld.long 0x30 16.--20. " CONV_CODES_POLY_CC_POLY_0 ,Polynom of the first convolutional code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x30 10.--11. " CONV_CODES_CONF_CC_VITERBI_LEN ,Viterbi decoder memory length" "5,10,20,30"
|
|
newline
|
|
bitfld.long 0x30 9. " CONV_CODES_CONF_CC_EN_TX_STOP ,Stop word at the end of the transmission enable" "Disabled,Enabled"
|
|
bitfld.long 0x30 8. " CONV_CODES_CONF_EN_CONV_CODE ,Convolutional codes enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x30 6.--7. " PACKET_EXTRA_STOP_WORD_LEN ,Stop word length" "8 bits,16 bits,24 bits,32 bits"
|
|
bitfld.long 0x30 5. " PACKET_EXTRA_EN_STOP_WORD ,Stop word after the CRC addition" "Not added,Added"
|
|
newline
|
|
bitfld.long 0x30 4. " PACKET_EXTRA_PKT_INFO_PRE_NPOST ,Packet information sampling trigger" "End of the packet,Sync word detection"
|
|
bitfld.long 0x30 2.--3. " PACKET_EXTRA_PATTERN_MAX_ERR ,Maximum number of errors in the pattern recognition" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x30 0.--1. " PACKET_EXTRA_PATTERN_WORD_LEN ,Pattern word length" "8 bits,16 bits,24 bits,32 bits"
|
|
line.long 0x34 "RF_CRC_POLYNOMIAL,RF CRC Polynomial Register"
|
|
line.long 0x38 "RF_CRC_RST,CRC Reset Register"
|
|
line.long 0x3C "RF_REG0F,RF Register 0F"
|
|
bitfld.long 0x3C 28.--31. " RX_FRAC_CONF_RX_FRAC_DEN ,RX fractional data rate fraction denominator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x3C 24.--27. " RX_FRAC_CONF_RX_FRAC_NUM ,RX fractional data rate fraction numerator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x3C 19. " FRAC_CONF_TX_FRAC_GAIN ,TX fraction gain" "0,1"
|
|
bitfld.long 0x3C 18. " FRAC_CONF_RX_FRAC_GAIN ,RX fraction gain" "0,1"
|
|
newline
|
|
bitfld.long 0x3C 17. " FRAC_CONF_TX_EN_FRAC ,TX fractional data rate enable" "Disabled,Enabled"
|
|
bitfld.long 0x3C 16. " FRAC_CONF_RX_EN_FRAC ,RX fractional data rate enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x3C 10.--14. " CONV_CODES_PUNCT_CC_PUNCT_2 ,Puncture of the third convolutional code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x3C 5.--9. " CONV_CODES_PUNCT_CC_PUNCT_1 ,Puncture of the second convolutional code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
newline
|
|
bitfld.long 0x3C 0.--4. " CONV_CODES_PUNCT_CC_PUNCT_0 ,Puncture of the first convolutional code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
line.long 0x40 "RF_REG10,RF Register 10"
|
|
bitfld.long 0x40 29.--31. " FRONTEND2_RESAMPLE_PH_GAIN ,Phase resampling block gain" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x40 26.--28. " FRONTEND2_RESAMPLE_RSSI_G2 ,Decimator in the RSSI resampling block gain" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x40 24.--25. " FRONTEND2_RESAMPLE_RSSI_G1 ,Interpolator in the RSSI resampling block gain" "0,1,2,3"
|
|
bitfld.long 0x40 22. " FRONTEND_EN_PHADC_DEGLITCH ,phADC deglitcher enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x40 21. " FRONTEND_EN_RESAMPLE_RSSI ,RSSI resampling enable" "Disabled,Enabled"
|
|
bitfld.long 0x40 20. " FRONTEND_EN_RESAMPLE_PHADC ,Phase resampling enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x40 16.--19. " FRONTEND_DIV_PHADC ,Divider to obtain the phADC clock" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x40 12.--15. " TX_MULT_TX_MULT_EXP ,TX multiplier exponent" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x40 8.--11. " TX_MULT_TX-MULT_MAN ,TX multiplier mantissa" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x40 4.--7. " TX_FRAC_CONF_TX_FRAC_DEN ,TX fractional data rate fraction denominator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x40 0.--3. " TX_FRAC_CONF_TX_FRAC_NUM ,TX fractional data rate fraction numerator" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x44 "RF_TX_PULSE0,RF TX Pulse 0 Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " TX_PULSE_SHAPE_1_TX_COEF4 ,TX pulse shape coefficient 4"
|
|
hexmask.long.byte 0x44 16.--23. 1. " TX_PULSE_SHAPE_1_TX_COEF3 ,TX pulse shape coefficient 3"
|
|
newline
|
|
hexmask.long.byte 0x44 8.--15. 1. " TX_PULSE_SHAPE_1_TX_COEF2 ,TX pulse shape coefficient 2"
|
|
hexmask.long.byte 0x44 0.--7. 1. " TX_PULSE_SHAPE_1_TX_COEF1 ,TX pulse shape coefficient 1"
|
|
line.long 0x48 "RF_TX_PULSE1,RF TX Pulse 1 Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " TX_PULSE_SHAPE_2_TX_COEF8 ,TX pulse shape coefficient 8"
|
|
hexmask.long.byte 0x48 16.--23. 1. " TX_PULSE_SHAPE_2_TX_COEF7 ,TX pulse shape coefficient 7"
|
|
newline
|
|
hexmask.long.byte 0x48 8.--15. 1. " TX_PULSE_SHAPE_2_TX_COEF6 ,TX pulse shape coefficient 6"
|
|
hexmask.long.byte 0x48 0.--7. 1. " TX_PULSE_SHAPE_2_TX_COEF5 ,TX pulse shape coefficient 5"
|
|
line.long 0x4C "RF_TX_PULSE2,RF TX Pulse 2 Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " TX_PULSE_SHAPE_3_TX_COEF12 ,TX pulse shape coefficient 12"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " TX_PULSE_SHAPE_3_TX_COEF11 ,TX pulse shape coefficient 11"
|
|
newline
|
|
hexmask.long.byte 0x4C 8.--15. 1. " TX_PULSE_SHAPE_3_TX_COEF10 ,TX pulse shape coefficient 10"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " TX_PULSE_SHAPE_3_TX_COEF9 ,TX pulse shape coefficient 9"
|
|
line.long 0x50 "RF_TX_PULSE3,RF TX Pulse 3 Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " TX_PULSE_SHAPE_4_TX_COEF16 ,TX pulse shape coefficient 16"
|
|
hexmask.long.byte 0x50 16.--23. 1. " TX_PULSE_SHAPE_4_TX_COEF15 ,TX pulse shape coefficient 15"
|
|
newline
|
|
hexmask.long.byte 0x50 8.--15. 1. " TX_PULSE_SHAPE_4_TX_COEF14 ,TX pulse shape coefficient 14"
|
|
hexmask.long.byte 0x50 0.--7. 1. " TX_PULSE_SHAPE_4_TX_COEF13 ,TX pulse shape coefficient 13"
|
|
line.long 0x54 "RF_RX_PULSE,RF RX Pulse Register"
|
|
bitfld.long 0x54 28.--31. " RX_PULSE_SHAPE_RX_COEF8 ,RX pulse shape coefficient 8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x54 24.--27. " RX_PULSE_SHAPE_RX_COEF7 ,RX pulse shape coefficient 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x54 20.--23. " RX_PULSE_SHAPE_RX_COEF6 ,RX pulse shape coefficient 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x54 16.--19. " RX_PULSE_SHAPE_RX_COEF5 ,RX pulse shape coefficient 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x54 12.--15. " RX_PULSE_SHAPE_RX_COEF4 ,RX pulse shape coefficient 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x54 8.--11. " RX_PULSE_SHAPE_RX_COEF3 ,RX pulse shape coefficient 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x54 4.--7. " RX_PULSE_SHAPE_RX_COEF2 ,RX pulse shape coefficient 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x54 0.--3. " RX_PULSE_SHAPE_RX_COEF1 ,RX pulse shape coefficient 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x58 "RF_REG16,RF Register 16"
|
|
bitfld.long 0x58 25.--28. " RX_IF_RESAMPLE_PH_IF ,Phase resampler IF value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
hexmask.long.word 0x58 16.--24. 1. " RX_IF_IF2_CLK_OS ,Carrier recovery IF value"
|
|
newline
|
|
hexmask.long.byte 0x58 8.--15. 1. " FSK_FCR_AMP_1_FSK_FCR_AMP1 ,FSK amplitude 1"
|
|
bitfld.long 0x58 6.--7. " FILTER_GAIN_DR_LIMIT ,Data-rate recovery limits" "0 %,3p125 %,6p25 %,12p6 %"
|
|
newline
|
|
bitfld.long 0x58 3.--5. " FILTER_GAIN_FILTER_GAIN_M ,Final stage gain of the matched filter mantissa" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x58 0.--2. " FILTER_GAIN_FILTER_GAIN_E ,Final stage gain of the matched filter exponent" "0,1,2,3,4,5,6,7"
|
|
line.long 0x5C "RF_REG17,RF Register 17"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " FSK_FCR_AMP_3_FSK_FCR_AMP3 ,FSK amplitude 3"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " FSK_FCR_AMP_2_FSK_FCR_AMP2 ,FSK amplitude 2"
|
|
newline
|
|
bitfld.long 0x5C 13.--14. " CARRIER_RECOVERY_EXTRA_MAX_ERR_IN_DL_SYNC ,Maximum errors in the delay line sync detection" "0,1,2,3"
|
|
bitfld.long 0x5C 12. " CARRIER_RECOVERY_EXTRA_MAX_SYNC_OK_DELAY_LINE ,pattern_ok signal usage in delay line to synchronize the deserializer" "Not used,Used"
|
|
newline
|
|
bitfld.long 0x5C 9.--11. " CARRIER_RECOVERY_EXTRA_NC_SEL_OUT ,Output position for the not-causal processing" "4 symbol,6 symbols,8 symbols,12 symbols,16 symbols,24 symbols,32 symbols,40 symbols"
|
|
bitfld.long 0x5C 8. " CARRIER_RECOVERY_EXTRA_EN_NOT_CAUSAL ,Not causal processing enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x5C 4.--6. " CARRIER_RECOVERY_EXTRA_FREQ_LIMIT_MAN ,Carrier recovery frequency limit mantissa" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x5C 0.--2. " CARRIER_RECOVERY_EXTRA_FREQ_LIMIT_EXP ,Carrier recovery frequency limit exponent" "-4,-3,-2,-1,0,1,2,3"
|
|
line.long 0x60 "RF_REG18,RF Register 18"
|
|
hexmask.long.word 0x60 16.--31. 1. " CORRECT_CFREQ_IF_CORRECT_CFREQ_IF ,RX mode IF value"
|
|
bitfld.long 0x60 14.--15. " RSSI_BANK_RSSI_TRI_CK_DIV ,Speed onRSSI triangular dithering signal" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x60 13. " RSSI_BANK_FAST_RSSI ,8x faster RSSI filtering" "Not faster,Faster"
|
|
bitfld.long 0x60 12. " RSSI_BANK_EN_FAST_PRE_SYNC ,Fast modes during the preamble reception enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x60 8.--11. " RSSI_BANK_TAU_RSSI_FILTERING ,RSSI filtering block time constant" "4 symbols,8 symbols,16 symbols,32 symbols,64 symbols,128 symbols,256 symbols,512 symbols,1024 symbols,?..."
|
|
bitfld.long 0x60 4. " DECISION_USE_VIT_SOFT ,Viterbi soft decoding usage" "not used,Used"
|
|
newline
|
|
bitfld.long 0x60 2.--3. " DECISION_VITERBI_LEN ,Viterbi path length" "1 bit,2 bits,4 bits,8 bits"
|
|
bitfld.long 0x60 1. " DECISION_VITERBI_POW_NLIN ,Value used by the Viterbi algorithm to evaluate the error of the path" "Amplitude,Power"
|
|
newline
|
|
bitfld.long 0x60 0. " DECISION_EN_VITERBI_GFSK ,Viterbi algorithm for the GFSK decoding enable" "Disabled,Enabled"
|
|
line.long 0x64 "RF_REG19,RF Register 19"
|
|
bitfld.long 0x64 28.--29. " PLL_BANK_PLL_FILTER_RES_TRIM_TX ,TX case loop filter resistor R2 value" "Normal,123 %,130 %,170 %"
|
|
bitfld.long 0x64 24.--27. " PLL_BANK_IQ_PLL_0_TX ,TX case charge pump bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x64 22. " PLL_BANK_LOW_DR_TX ,TX low data-rate mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x64 20.--21. " PLL_BANK_PLL_FILTER_RES_TRIM ,Loop filter resistor R2 value when bit 5 is high" "Normal,123 %,130 %,170 %"
|
|
newline
|
|
bitfld.long 0x64 16.--19. " PLL_BANK_IQ_PLL_0 ,Charge pump bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x64 13. " PA_PWR_MIN_PA_PWR ,Minimum power during the PA ramp-up" "-3,-1"
|
|
newline
|
|
bitfld.long 0x64 8.--12. " PA_PWR_PA_PWR ,Pa power" ",,,,,,,,,,,,,-3,-2,-1,0,1,2,3,4,5,6,7,8,9,10,11,12,?..."
|
|
bitfld.long 0x64 4.--7. " CLK_CH_FILTER_DIV_RSSI ,Division factor for the clock controlling the RSSI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x64 0.--3. " CLK_CH_FILTER_DIV_FILT ,Division factor for the clock controlling the channel filter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x68 "RF_REG1A,RF Register 1A"
|
|
bitfld.long 0x68 28.--31. " ATT_CTRL_ATT_CTRL_MAX ,Maximum attenuation level in AGC algorithm" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x68 24.--27. " ATT_CTRL_SET_RX_ATT_CTRL ,Attenuation level if the AGC is bypassed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x68 22.--23. " RSSI_CTRL_AGC_DECAY_TAU ,Time constant of the decay speed" "0,1,2,3"
|
|
bitfld.long 0x68 21. " RSSI_CTRL_AGC_USE_LNA ,LNA bias usage by the AGC algorithm" "Not used,Used"
|
|
newline
|
|
bitfld.long 0x68 20. " RSSI_CTRL_AGC_MODE ,AGC algorithm selection" "Old,New"
|
|
bitfld.long 0x68 18.--19. " RSSI_CTRL_AGC_WAIT ,Wait time of the AGC after switching between states in RSSI filtering periods" "Not waited,1 period,2 periods,3 periods"
|
|
newline
|
|
bitfld.long 0x68 17. " RSSI_CTRL_PALOAD_BLOCKS_AGC ,AGC blockade during the payload" "Not blocked,Blocked"
|
|
bitfld.long 0x68 16. " RSSI_CTRL_BYPASS_AGC ,AGC algorithm bypass" "Not bypassed,Bypassed"
|
|
newline
|
|
bitfld.long 0x68 8.--12. " FILTER_BIAS_IQ_FI_BW ,Channel filter bandwidth bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x68 0.--4. " FILTER_BIAS_IQ_FI_FC ,Channel filter central frequency bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
line.long 0x6C "RF_REG1B,RF Register 1B"
|
|
bitfld.long 0x6C 31. " IEEE802154_OPTS_EN_DW_TEST ,TX data-whitening before the convolutional code block enable" "Disabled,Enabled"
|
|
bitfld.long 0x6C 29.--30. " IEEE802154_OPTS_BER_CLK_MODE ,Clock output mode for BER mode or RW mode" "Falling edge,Rising edge,Toggled signal,Enable from recovery"
|
|
newline
|
|
bitfld.long 0x6C 28. " IEEE802154_OPTS_RX_DATA_NOT_SAMPLED ,Signal rx_data in testmodes sampling" "Sampled,Not sampled"
|
|
bitfld.long 0x6C 27. " IEEE802154_OPTS_EN_L2F_RX ,Frequency to linear conversion in the RX side enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x6C 24.--26. " IEEE802154_OPTS_C2B_THR ,chip2bit correlator threshold" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x6C 20.--23. " AGC_PEAK_DET_PEAK_DET_TAU ,Peak detector monostable circuit time constant" "Bypassed,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x6C 18.--19. " AGC_PEAK_DET_PEAK_DET_THR_LOW ,Peak detector low level threshold" "0,1,2,N/A"
|
|
bitfld.long 0x6C 17. " AGC_PEAK_DET_PEAK_DET_THR_HIGH ,Peak detector high level threshold" "2,3"
|
|
newline
|
|
bitfld.long 0x6C 16. " AGC_PEAK_DET_EN_AGC_PEAK ,AGC peak detector enable" "Disabled,Enabled"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " AGC_THR_HIGH_AGC_THR_HIGH ,AGC threshold high level"
|
|
newline
|
|
hexmask.long.byte 0x6C 0.--7. 1. " AGC_THR_LOW_AGC_THR_LOW ,AGC threshold low level"
|
|
line.long 0x70 "RF_AGC_LUT1,RF AGC Look Up Table Register 1"
|
|
hexmask.long.word 0x70 22.--31. 1. " AGC_LUT_1_AGC_LEVEL_2_LO ,AGC look up table level 2 low"
|
|
hexmask.long.word 0x70 11.--21. 1. " AGC_LUT_1_AGC_LEVEL_1 ,AGC look up table level 1"
|
|
newline
|
|
hexmask.long.word 0x70 0.--10. 1. " AGC_LUT_1_AGC_LEVEL_0 ,AGC look up table level 0"
|
|
line.long 0x74 "RF_AGC_LUT2,RF AGC Look Up Table Register 2"
|
|
hexmask.long.word 0x74 23.--31. 1. " AGC_LUT_2_AGC_LEVEL_5_LO ,AGC look up table level 5 low"
|
|
hexmask.long.word 0x74 12.--22. 1. " AGC_LUT_2_AGC_LEVEL_4 ,AGC look up table level 4"
|
|
newline
|
|
hexmask.long.word 0x74 1.--11. 1. " AGC_LUT_2_AGC_LEVEL_3 ,AGC look up table level 3"
|
|
bitfld.long 0x74 0. " AGC_LUT_2_AGC_LEVEL_2_HI ,AGC look up table level 2 high" "0,1"
|
|
line.long 0x78 "RF_AGC_LUT3,RF AGC Look Up Table Register 3"
|
|
hexmask.long.byte 0x78 24.--31. 1. " AGC_LUT_3_AGC_LEVEL_8_LO ,AGC look up table level 8 low"
|
|
hexmask.long.word 0x78 13.--23. 1. " AGC_LUT_3_AGC_LEVEL_7 ,AGC look up table level 7"
|
|
newline
|
|
hexmask.long.word 0x78 2.--12. 1. " AGC_LUT_3_AGC_LEVEL_6 ,AGC look up table level 6"
|
|
bitfld.long 0x78 0.--1. " AGC_LUT_3_AGC_LEVEL_5_HI ,AGC look up table level 5 high" "0,1,2,3"
|
|
line.long 0x7C "RF_AGC_LUT4,RF AGC Look Up Table Register 4"
|
|
hexmask.long.byte 0x7C 25.--31. 1. " AGC_LUT_4_AGC_LEVEL_11_LO ,AGC look up table level 11 low"
|
|
hexmask.long.word 0x7C 14.--24. 1. " AGC_LUT_4_AGC_LEVEL_10 ,AGC look up table level 10"
|
|
newline
|
|
hexmask.long.word 0x7C 3.--13. 1. " AGC_LUT_4_AGC_LEVEL_9 ,AGC look up table level 9"
|
|
bitfld.long 0x7C 0.--2. " AGC_LUT_4_AGC_LEVEL_8_HI ,AGC look up table level 8 high" "0,1,2,3,4,5,6,7"
|
|
line.long 0x80 "RF_REG20,RF Register 20"
|
|
bitfld.long 0x80 28.--31. " TIMINGS_3_T_DLL ,Time needed by the DLL blocks to switch on" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x80 24.--27. " TIMINGS_3_T_PLL_TX ,Time needed by the PLL blocks in TX mode to switch on" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x80 20.--23. " TIMINGS_2_T_SUBBAND_TX ,Time needed by the subband algorithm to calibrate in TX" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x80 16.--19. " TIMINGS_2_T_TX_RF ,Time needed by the TX RF blocks to switch on" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x80 12.--14. " TIMINGS_1_T_GRANULARITY_TX ,Granularity of the timer in TX mode fix value" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x80 8.--10. " TIMINGS_1_T_GRANULARITY_RX ,Granularity of the timer in RX mode fix value" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x80 0.--3. " AGC_LUT_5_AGC_LEVEL_11_HI ,AGC look up table level 11 high" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x84 "RF_AGC_ATT1,RF AGC Attenuation Register 1"
|
|
bitfld.long 0x84 30.--31. " AGC_ATT_1_AGC_ATT_AB_LO ,AGC attenuation level AB low" "0,1,2,3"
|
|
bitfld.long 0x84 27.--29. " AGC_ATT_1_AGC_ATT_9A ,AGC attenuation level 9A" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x84 24.--26. " AGC_ATT_1_AGC_ATT_89 ,AGC attenuation level 89" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x84 21.--23. " AGC_ATT_1_AGC_ATT_78 ,AGC attenuation level 78" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x84 18.--20. " AGC_ATT_1_AGC_ATT_67 ,AGC attenuation level 67" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x84 15.--17. " AGC_ATT_1_AGC_ATT_56 ,AGC attenuation level 56" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x84 12.--14. " AGC_ATT_1_AGC_ATT_45 ,AGC attenuation level 45" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x84 9.--11. " AGC_ATT_1_AGC_ATT_34 ,AGC attenuation level 34" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x84 6.--8. " AGC_ATT_1_AGC_ATT_23 ,AGC attenuation level 23" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x84 3.--5. " AGC_ATT_1_AGC_ATT_12 ,AGC attenuation level 12" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x84 0.--2. " AGC_ATT_1_AGC_ATT_01 ,AGC attenuation level 01" "0,1,2,3,4,5,6,7"
|
|
line.long 0x88 "RF_REG22,RF Register 22"
|
|
bitfld.long 0x88 29. " TIMING_FAST_RX_EN_FAST_RX_TXFILT ,Filter TX configuration for the fast RX PLL enable" "Disabled,Enabled"
|
|
bitfld.long 0x88 28. " TIMING_FAST_RX_EN-FAST_RX ,Fast RX PLL enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x88 24.--27. " TIMING_FAST_RX_T_RX_FAST_CHP ,Time to switch off the fast CHP in RX mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x88 20.--23. " TIMINGS_5_T_RX_RF ,Time needed by the RX RF blocks to switch on" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x88 16.--19. " TIMINGS_5_T_RX_BB ,Time needed by the RX BB blocks to switch on" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x88 12.--15. " TIMINGS_4_T_SUBBAND_RX ,Time needed by the subband algorithm to calibrate in RX" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x88 8.--11. " TIMINGS_4_T_PLL_RX ,Time needed by the PLL blocks in RX mode to switch on" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x88 1. " AGC_ATT_2_AGC_ATT_1DB ,AGC attenuation specified by 1 dB steps from 4dB to 11 dB" "Not specified,Specified"
|
|
newline
|
|
bitfld.long 0x88 0. " AGC_ATT_2_AGC_ATT_AB_HI ,AGC attenuation level AB high" "0,1"
|
|
line.long 0x8C "RF_REG23,RF Register 23"
|
|
bitfld.long 0x8C 28.--31. " BIAS_1_IQ-RXTX_3 ,PrePA casc bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x8C 24.--27. " BIAS_1_IQ_RXTX_2 ,PrePA in bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x8C 20.--23. " BIAS_0_IQ_RXTX_1 ,PA backoff bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x8C 16.--19. " BIAS_0_IQ_RXTX_0 ,PA bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x8C 12.--14. " INTERFACE_CONF_APB_WAIT_STATE ,Number of wait states during the APB transaction" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x8C 8.--9. " INTERFACE_CONF_SPI_SELECT ,SPI mode selection" "Legacy,Advanced,BLIM4SME,?..."
|
|
newline
|
|
bitfld.long 0x8C 7. " TIMEOUT_EN_RX_TIMEOUT ,Timeout of the RX when the system is on FSM mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x8C 4.--6. " TIMEOUT_T_TIMEOUT_GR ,Granularity of the timer in timeout RX mode" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x8C 0.--3. " TIMEOUT_T_RX_TIMEOUT ,Time that has to occur before the timeout" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x90 "RF_REG24,RF Register 24"
|
|
bitfld.long 0x90 28.--31. " BIAS_5_IQ_PLL_4_RX ,VCO bias for RX" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x90 24.--27. " BIAS_5_IQ_PLL_4_TX ,VCO bias for TX" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x90 20.--23. " BIAS_4_IQ_PLL_2 ,Sub-band comparator bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x90 16.--19. " BIAS_4_IQ_PLL_1 ,Dynamic divider bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x90 12.--15. " BIAS_3_IQ_RXTX_8 ,IFA ctrl_c bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x90 8.--11. " BIAS_3_IQ_RXTX_7 ,IFA ctrl_r bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x90 4.--7. " BIAS_2_IQ_RXTX_6 ,VCOM_MX bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x90 0.--3. " BIAS_2_IQ_RXTX_5 ,VCOM_LO bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x94 "RF_REG25,RF Register 25"
|
|
bitfld.long 0x94 28.--31. " BIAS_9_IQ_BB_6 ,Peak detector threshold bias 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x94 24.--27. " BIAS_9_IQ_BB_5 ,Peak detector bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x94 20.--23. " BIAS_8_IQ_BB_4 ,RSSI_D bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x94 16.--19. " BIAS_8_IQ_BB_3 ,RSSI_G bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x94 12.--15. " BIAS_7_IQ_BB_2 ,ACD_L bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x94 8.--11. " BIAS_7_IQ_BB_1 ,ACD_C bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x94 4.--7. " BIAS_6_IQ_BB_0 ,ACD_O bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x94 0.--3. " BIAS_6_IQ_PLL_3 ,DLL bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x98 "RF_REG26,RF Register 26"
|
|
bitfld.long 0x98 28. " SD_MASH_MASH_ENABLE ,Sigma delta mash enable" "Disabled,Enabled"
|
|
bitfld.long 0x98 27. " SD_MASH_MASH_DITHER ,Dithering on the sigma delta mash enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x98 25.--26. " SD_MASH_MASH_ORDER ,Sigma delta mash order" "0,1,2,3"
|
|
bitfld.long 0x98 24. " SD_MASH_MASH_MASH_RSTB ,Sigma delta mash reset" "Reset,No reset"
|
|
newline
|
|
bitfld.long 0x98 20.--23. " BIAS_12_LNA_AGC_BIAS_3 ,LNA bias for AGC lvl 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x98 16.--19. " BIAS_12_LNA_AGC_BIAS_2 ,LNA bias for AGC lvl 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x98 12.--15. " BIAS_11_LNA_AGC_BIAS_1 ,LNA bias for AGC lvl 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x98 8.--11. " BIAS_11_LNA_AGC_BIAS_0 ,LNA bias for AGC lvl 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x98 4.--7. " BIAS_10_IQ_BB_8 ,Peak detector threshold bias 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x98 0.--3. " BIAS_10_IQ_BB_7 ,Peak detector threshold bias 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x9C "RF_REG27,RF Register 27"
|
|
bitfld.long 0x9C 31. " CTRL_ADC_ONE_CK_RSSI_PHADC ,RSSI and the phADC the same clock sharing" "Not shared,Shared"
|
|
bitfld.long 0x9C 29.--30. " CTRL_ADC_PHADC_DELLATCH ,phADC delay latch trimming" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x9C 28. " CTRL_ADC_CTRL_ADC[4] ,phADC latch idle" "Not idle,Idle"
|
|
bitfld.long 0x9C 26.--27. " [3:2] ,phADC clock delay" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x9C 24.--25. " [1:0] ,phADC reset delay" "0,1,2,3"
|
|
bitfld.long 0x9C 19. " BIAS_EN_2_EN_PTAT ,PTAT enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x9C 16.--18. " BIAS_EN_2_EN_BIAS_BB_HI ,BB high bias enable" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x9C 12.--15. " BIAS_EN_1_EN_BIAS_BB_LO ,BB low bias enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x9C 7.--11. " BIAS_EN_1_EN_BIAS_PLL ,PLL bias enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
hexmask.long.byte 0x9C 0.--6. 1. " BIAS_EN_1_EN_BIAS_RXTX ,RXTX bias enable"
|
|
newline
|
|
line.long 0xA0 "RF_REG28,RF Register 28"
|
|
bitfld.long 0xA0 31. " CTRL_RX_SWITCH_LP ,Low-pass filter in the RX chain switch" "Not switched,Switched"
|
|
bitfld.long 0xA0 30. " CTRL_RX_USE_PEAK_DETECTOR ,Peak detector power on during the RX by the FSM" "Not powered,Powered"
|
|
newline
|
|
bitfld.long 0xA0 29. " CTRL_RX_START_MIX_ON_CAL ,Mixer enable during the sub-band selection phase" "Disabled,Enabled"
|
|
bitfld.long 0xA0 28. " CTRL_RX_CTRL_RX[4] ,IFA PTAT-R only" "0,1"
|
|
newline
|
|
bitfld.long 0xA0 26.--27. " [3:2] ,Resonance 2 LNA" "0,1,2,3"
|
|
bitfld.long 0xA0 24.--25. " [1:0] ,Resonance 1 LNA" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0xA0 20.--23. " SWCAP_FSM_SB_CAP_RX ,VCO subband selection for RX in FSM mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0xA0 16.--19. " SWCAP_FSM_SB_CAP_TX ,VCO subband selection for TX in FSM mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0xA0 10. " DLL_CTRL_CK_LAST_SEL_DELAY ,CK last sel delay" "0,1"
|
|
bitfld.long 0xA0 9. " DLL_CTRL_CK_FIRST_SEL_DELAY ,CK first sel delay" "0,1"
|
|
newline
|
|
bitfld.long 0xA0 8. " DLL_CTRL_CK_EXT_SEL ,Input clock source selection" "ck_xtal pin,ck_ext pin"
|
|
bitfld.long 0xA0 7. " DLL_CTRL_CK_DIG_EN ,Alternate ck_dig pin usage to output the PLL reference clock signal" "Not used,Used"
|
|
newline
|
|
bitfld.long 0xA0 6. " DLL_CTRL_CK_TEST_EN ,Output on GPIO the PLL reference clock signal via ck_test pin enable" "Disabled,Enabled"
|
|
bitfld.long 0xA0 5. " DLL_CTRL_TOO_FAST_ENB ,Auxiliary wide lock range phase detector when fast mode locking is enabled enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA0 4. " DLL_CTRL_LOCKED_DET_EN ,Reference frequency multiplier locked detector enable" "Disabled,Enabled"
|
|
bitfld.long 0xA0 3. " DLL_CTRL_LOCKED_AUTO_CHECK_EN ,Automatic frequency multiplier lock trial enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA0 2. " DLL_CTRL_FAST_ENB ,Fast mode locking of the reference frequency multiplier enable" "Disabled,Enabled"
|
|
bitfld.long 0xA0 0.--1. " DLL_CTRL_CK_SEL ,Clock used as frequency reference of the PLL selection" "ck_xtal / ck_ext,ck_sel / 3 x ck_xtal / 3 x ck_ext,ck_sel & /2,ck_sel & /5"
|
|
newline
|
|
line.long 0xA4 "RF_PLL_CTRL,RF PLL Control Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " XTAL_TRIM_XTAL_TRIM ,xtal trimming"
|
|
bitfld.long 0xA4 20. " PLL_CTRL_2_PLL_RX_48MEG ,PLL setting in RX" "24 MHz,48 MHz"
|
|
newline
|
|
bitfld.long 0xA4 19. " PLL_CTRL_2_SWCAP_TX_SAME_RX ,The same SWCAP for RX and TX" "Not the same,The same"
|
|
bitfld.long 0xA4 18. " PLL_CTRL_2_SWCAP_FSM ,Use the SWCAP_FSM register as reference for the sub-band selection" "Not used,Used"
|
|
newline
|
|
bitfld.long 0xA4 17. " PLL_CTRL_2_DLL_RSTB ,DLL signal reset" "Reset,No reset"
|
|
bitfld.long 0xA4 16. " PLL_CTRL_2_VCO_SUBBAND_TRIM_HI ,VCO sub-band selection" "0,1"
|
|
newline
|
|
bitfld.long 0xA4 13.--15. " PLL_CTRL_1_VCO_SUBBAND_TRIM_LO ,VCO sub-band selection" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0xA4 12. " PLL_CTRL_1_SUB_SEL_OFFS_EN ,Sub-band selection comparator offset addition" "Not added,Added"
|
|
newline
|
|
bitfld.long 0xA4 11. " PLL_CTRL_1_DIV2_CLKVCO_TEST_EN ,VCO signal programmable divider division ratio" "/1,/2"
|
|
bitfld.long 0xA4 10. " PLL_CTRL_1_VCODIV_CLK_TEST_EN ,Output on GPIO the VCO signal divided by the programmable divider enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA4 9. " PLL_CTRL_1_EN_LOW_CHP_BIAS ,Lower bias current for the required output pumping current usage allowance" "Not allowed,Allowed"
|
|
bitfld.long 0xA4 8. " PLL_CTRL_1_CHP_DEAD_ZONE ,Charge-pump dead zone enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA4 6.--7. " PLL_CTRL_1_CHP_CURR_OFFSET_TRIM ,Charge-pump offset current values selection" "15,22p5,30,60"
|
|
bitfld.long 0xA4 5. " PLL_CTRL_1_HIGH_BW_FILTER ,PLL filter high bandwidth enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA4 4. " PLL_CTRL_1_FAST_CHP_EN ,High current output of the charge-pump for PLL TX high bandwidth mode enable" "Disabled,Enabled"
|
|
bitfld.long 0xA4 2.--3. " PLL_CTRL_1_CHP_MODE_TRIM ,CHP mode trim" "Charge-pump active,Minimum frequency,Medium frequency,Maximum frequency"
|
|
newline
|
|
bitfld.long 0xA4 1. " PLL_CTRL_1_CHP_CMC_EN ,Common mode control block of the charge pump enable" "Disabled,Enabled"
|
|
bitfld.long 0xA4 0. " PLL_CTRL_1_CHP_CURR_OFFSET_EN ,Charge-pump offset current enable" "Disabled,Enabled"
|
|
line.long 0xA8 "RF_REG2A,RF Register 2A"
|
|
bitfld.long 0xA8 28. " ENABLES_SEPARATE_PPA_CASC ,PPA cascode bit independence from the en PA" "Not independent,Independent"
|
|
bitfld.long 0xA8 27. " ENABLES_EN_RXTX[5] ,PPA casc signal enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA8 26. " [4] ,PA signal enable" "Disabled,Enabled"
|
|
bitfld.long 0xA8 25. " [3] ,TX signal enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA8 24. " [2] ,IFA signal enable" "Disabled,Enabled"
|
|
bitfld.long 0xA8 23. " [1] ,LNA signal enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA8 22. " [0] ,LNA signal enable" "Disabled,Enabled"
|
|
bitfld.long 0xA8 21. " ENABLES_EN_BB[5] ,Peak detector BB signal enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA8 20. " [4] ,RSSI BB signal enable" "Disabled,Enabled"
|
|
bitfld.long 0xA8 19. " [3] ,ADC BB signal enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA8 18. " [2] ,Filter bandwidth bias BB signal enable" "Disabled,Enabled"
|
|
bitfld.long 0xA8 17. " [1] ,Filter central frequency bias BB signal enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xA8 16. " [0] ,Filter BB signal enable" "Disabled,Enabled"
|
|
bitfld.long 0xA8 13.--15. " RSSI_TUN_RSSI_TUN_GAIN ,RSSI tuning for gain" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0xA8 8.--12. " RSSI_TUN_RSSI_ODD_OFFSET ,RSSI tuning for odd stages" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0xA8 4.--7. " RSSI_TUN_RSSI_EVEN_MAX ,Maximum value of the triangular wave for even stages in RSSI tuning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0xA8 0.--3. " RSSI_TUN_RSSI_EVEN_MIN ,Minimum value of the triangular wave for even stages in RSSI tuning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0xAC "RF_XTAL_CTRL,RF XTAL Control Register"
|
|
bitfld.long 0xAC 28.--31. " XTAL_CTRL_XO_THR_HIGH ,High threshold for XTAL trimming" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0xAC 24.--27. " XTAL_CTRL_XO_THR_LOW ,Low threshold for XTAL trimming" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0xAC 22.--23. " XTAL_CTRL_XO_A_S_CURR_SEL_HIGH ,Value of AFTER_STARTUP_CURR_SEL when level is higher than XO_THR_HIGH" "0,1,2,3"
|
|
bitfld.long 0xAC 20.--21. " XTAL_CTRL_XO_A_S_CURR_SEL_LOW ,Value of AFTER_STARTUP_CURR_SEL when level is lower than XO_THR_LOW" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0xAC 18. " XTAL_CTRL_XTAL_CTRL_BYPASS ,XTAL control algorithm bypass" "Not bypassed,Bypassed"
|
|
bitfld.long 0xAC 17. " XTAL_CTRL_DIG_CLK_IN_SEL ,Digital block signal selection" "Internal XTAL,CLK_IN_DIG"
|
|
newline
|
|
bitfld.long 0xAC 16. " XTAL_CTRL_XO_EN_B_REG ,XTAL oscillator enable" "Enabled,Disabled"
|
|
bitfld.long 0xAC 14.--15. " XTAL_CTRL_XTAL_CKDIV ,XTAL trimming speed" "43 us,85 us,171 us,341 us"
|
|
newline
|
|
bitfld.long 0xAC 13. " XTAL_CTRL_CLK_OUT_EN_B ,Output clock going to main IP disable" "No,Yes"
|
|
bitfld.long 0xAC 12. " XTAL_CTRL_REG_VALUE_SEL ,Use XTAL_REG control bits and corresponding control signal instead of main control signals" "Not used,Used"
|
|
newline
|
|
bitfld.long 0xAC 10.--11. " XTAL_CTRL_AFTERSTARTUP_CURR_SEL ,Current before amplitude stabilization after starting-up in active transistors of the core oscillator selection" "0p15 mA,0p24 mA,0p40 mA,0p61 mA"
|
|
bitfld.long 0xAC 8.--9. " XTAL_CTRL_STARTUP_CURR_SEL ,Starting-up current in active transistors of the core oscillator selection" "0p41 mA,0p59 mA,0p88 mA,1p24 mA"
|
|
newline
|
|
bitfld.long 0xAC 7. " XTAL_CTRL_INV_CLK_DIG ,CLK_DIG output clock invert" "Not inverted,Inverted"
|
|
bitfld.long 0xAC 6. " XTAL_CTRL_INV_CLK_PLL ,CLK_PLL output clock invert" "Not inverted,Inverted"
|
|
newline
|
|
bitfld.long 0xAC 5. " XTAL_CTRL_FORCE_CLK_READY ,Allow to force output clocks on CLK_PLL/CLK_DIG/CLK_OUT" "Not allowed,Allowed"
|
|
bitfld.long 0xAC 4. " XTAL_CTRL_CLK_DIG_EN_B ,Output clock going to digital disable" "No,Yes"
|
|
newline
|
|
bitfld.long 0xAC 3. " XTAL_CTRL_BUFF_EN_B ,XTAL buffer disable" "No,Yes"
|
|
bitfld.long 0xAC 2. " XTAL_CTRL_HP_MODE ,Bias current in the clock buffer increase" "Not increased,Increased"
|
|
newline
|
|
bitfld.long 0xAC 1. " XTAL_CTRL_LP_MODE ,Bias current in the clock buffer reduction" "Not reduced,Reduced"
|
|
bitfld.long 0xAC 0. " XTAL_CTRL_EXT_CLK_MODE ,XTAL_P and eventually XTAL_N external clock mode enable" "Disabled,Enabled"
|
|
newline
|
|
line.long 0xB0 "RF_REG2C,RF Register 2C"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " SUBBAND_OFFSET_SB_OFFSET ,Frequency count offset compensating varicap offset"
|
|
bitfld.long 0xB0 20.--23. " SWCAP_LIM_SB_MAX_VAL ,Maximum subband value in linear search subband" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0xB0 16.--19. " SWCAP_LIM_SB_MIN_VAL ,Minimum subband value in linear search subband" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0xB0 15. " SUBBAND_CONF_SB_FLL_MODE ,FLL mode for the subband selection enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xB0 14. " SUBBAND_CONF_SB_INV_BAND ,SB_HIGH and SB_LOW meaning inversion" "Not inverted,Inverted"
|
|
bitfld.long 0xB0 12.--13. " SUBBAND_CONF_SB_FREQ_CNT ,Frequency mode count length" "256,512/4096,,1024"
|
|
newline
|
|
bitfld.long 0xB0 10.--11. " SUBBAND_CONF_SB_WAIT_T ,PLL settling waiting time (RX/TX)" "8 us/2 us,12 us/3 us,16 us/4 us,24 us/6 us"
|
|
bitfld.long 0xB0 8.--9. " SUBBAND_CONF_SB_MODE ,Sub-band algorithm mode" "SAR w/ comparators/frequency ratios,Linear w/ comparators/frequency ratios,?..."
|
|
newline
|
|
bitfld.long 0xB0 4.--5. " PA_CONF_SW_CN ,Harmonic 2 notch tuning" "0,1,2,3"
|
|
bitfld.long 0xB0 3. " PA_CONF_TX_SWITCHPA ,PA only with the digital block enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0xB0 2. " PA_CONF_TX_0DBM ,PA enable" "Disabled,Enabled"
|
|
newline
|
|
if (((per.l(ad:0x40010000+0xB4))&0x100)==0x100)
|
|
group.long 0xB4++0x03
|
|
line.long 0x00 "RF_REG2D,RF Register 2D"
|
|
bitfld.long 0x00 31. " SUBBAND_CORR_SUBBAND_CORR_EN ,Subband correction enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 28.--30. " SUBBAND_CORR_SUBBAND_CORR_RX ,Subband correction in RX" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x00 24.--26. " SUBBAND_CORR_SUBBAND_CORR_TX ,Subband correction in TX" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x00 23. " PLL_CONF_TX_NRX_INV_CLK_PLL_TX ,CLK_PLL clock inversion" "Not inverted,Inverted"
|
|
newline
|
|
bitfld.long 0x00 22. " PLL_CONF_TX_NRX_INV_CLK_DIG_TX ,CLK_DIG clock inversion" "Not inverted,Inverted"
|
|
bitfld.long 0x00 20.--21. " PLL_CONF_TX_NRX_CK_SEL_TX ,Xor value between TX and RX for the CK_SEL field of register DLL_CTRL" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 17.--18. " PLL_CONF_TX_NRX_CHP_CURR_OFF_TRIM_TX ,CHP current off trimming TX" "0,1,2,3"
|
|
bitfld.long 0x00 16. " PLL_CONF_TX_NRX_CHP_CURR_OFF_EN_TX ,CHP current off enable TX" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 15. " PA_RAMPUP_FULL_PA_RAMPUP ,PA rampup usage of the PA backoff enable bit" "Not used,Used"
|
|
bitfld.long 0x00 12.--14. " PA_RAMPUP_DEL_PA_RAMPUP ,Ramp-up starting after PA enable detection waiting time" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x00 10.--11. " PA_RAMPUP_TAU_PA_RAMPUP ,Ramp-up/ramp-down time constant" "0,1,2,3"
|
|
bitfld.long 0x00 9. " PA_RAMPUP_EN_PA_RAMPDOWN ,PA ramp-down enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " PA_RAMPUP_EN_PA_RAMPUP ,PA ramp-up enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1.--2. " MISC_RSSI_PRE_ATT ,RSSI pre-attenuator" "0 dB,4 dB,8 dB,12 dB"
|
|
newline
|
|
bitfld.long 0x00 0. " MISC_XTAL_LOW_CLK_READY_TH_EN ,CLK_READY lower threshold value" "Not lower,Lower"
|
|
else
|
|
group.long 0xB4++0x03
|
|
line.long 0x00 "RF_REG2D,RF Register 2D"
|
|
bitfld.long 0x00 31. " SUBBAND_CORR_SUBBAND_CORR_EN ,Subband correction enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 28.--30. " SUBBAND_CORR_SUBBAND_CORR_RX ,Subband correction in RX" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x00 24.--26. " SUBBAND_CORR_SUBBAND_CORR_TX ,Subband correction in TX" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x00 23. " PLL_CONF_TX_NRX_INV_CLK_PLL_TX ,CLK_PLL clock inversion" "Not inverted,Inverted"
|
|
newline
|
|
bitfld.long 0x00 22. " PLL_CONF_TX_NRX_INV_CLK_DIG_TX ,CLK_DIG clock inversion" "Not inverted,Inverted"
|
|
bitfld.long 0x00 20.--21. " PLL_CONF_TX_NRX_CK_SEL_TX ,Xor value between TX and RX for the CK_SEL field of register DLL_CTRL" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 17.--18. " PLL_CONF_TX_NRX_CHP_CURR_OFF_TRIM_TX ,CHP current off trimming TX" "0,1,2,3"
|
|
bitfld.long 0x00 16. " PLL_CONF_TX_NRX_CHP_CURR_OFF_EN_TX ,CHP current off enable TX" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 15. " PA_RAMPUP_FULL_PA_RAMPUP ,PA rampup usage of the PA backoff enable bit" "Not used,Used"
|
|
bitfld.long 0x00 12.--14. " PA_RAMPUP_DEL_PA_RAMPUP ,Ramp-up starting after PA enable detection waiting time" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x00 10.--11. " PA_RAMPUP_TAU_PA_RAMPUP ,Ramp-up/ramp-down time constant" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 8. " PA_RAMPUP_EN_PA_RAMPUP ,PA ramp-up enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1.--2. " MISC_RSSI_PRE_ATT ,RSSI pre-attenuator" "0 dB,4 dB,8 dB,12 dB"
|
|
newline
|
|
bitfld.long 0x00 0. " MISC_XTAL_LOW_CLK_READY_TH_EN ,CLK_READY lower threshold value" "Not lower,Lower"
|
|
endif
|
|
group.long 0xB8++0x07
|
|
line.long 0x00 "RF_REG2E,RF Register 2E"
|
|
hexmask.long.byte 0x00 24.--31. 1. " RSSI_DETECT_ABS_THR_RSSI_DET_ABS_THR ,Absolute RSSI detection threshold"
|
|
hexmask.long.byte 0x00 16.--23. 1. " RSSI_DETECT_DIFF_THR_RSSI_DET_DIFF_THR ,Differential RSSI detection threshold"
|
|
newline
|
|
bitfld.long 0x00 14. " DEMOD_CTRL_EN_DELLINE_SYNC_DET ,Sync word detection in delay line enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " DEMOD_CTRL_RSSI_DET_FILT ,Additional filtering on the RSSI value addition" "Not added,Added"
|
|
newline
|
|
bitfld.long 0x00 12. " DEMOD_CTRL_EN_FAST_CLK_RECOV ,Clock recovery during the rest of the preamble speed up enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 11. " DEMOD_CTRL_EN_MIN_MAX_MF ,Min max algorithm after the matched filter enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 10. " DEMOD_CTRL_EN_PRE_SYNC ,Sync detection on the non-delayed path enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " DEMOD_CTRL_BLOCK_RSSI_DET ,RSSI detection during the slow-down period blockade" "Not blocked,Blocked"
|
|
newline
|
|
bitfld.long 0x00 8. " DEMOD_CTRL_EARLY_FINE_RECOV ,Early fine recovery after the packet detection or pre-sync enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6.--7. " RSSI_DETECT_RSSI_DET_CR_LEN ,Number of samples to estimate the carrier offset" "32,64,128,256"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " RSSI_DETECT_RSSI_DET_WAIT ,Symbols to wait after the RSSI detection" "0,1,2,4"
|
|
bitfld.long 0x00 2.--3. " RSSI_DETECT_RSSI_DET_DIFF_LL ,Distance between the actual value and the subtracted one" "1 sample,2 samples,3 samples,4 samples"
|
|
newline
|
|
bitfld.long 0x00 1. " RSSI_DETECT_EN_ABS_RSSI_DETECT ,Absolute RSSI detection enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " RSSI_DETECT_EN_DIFF_RSSI_DETECT ,Differential RSSI detection enable" "Disabled,Enabled"
|
|
line.long 0x04 "RF_REG2F,RF Register 2F"
|
|
bitfld.long 0x04 24.--26. " CK_DIV_1_6_CK_DIV_1_6 ,Clock division factor for CK_DIV_1_6" "No clock,1,2,3,4,5,6,7"
|
|
bitfld.long 0x04 22. " PADS_PE_DS_GPIO_DS ,Increased drive strength of the digital pads enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 21. " PADS_PE_DS_GPIO_PE ,Pull-up of the GPIO pads enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 20. " PADS_PE_DS_NRESET_PE ,Pull-up of the NRESET pad enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 19. " PADS_PE_DS_SPI_MISO_PE ,Pull-up of the MISO SPI pad enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 18. " PADS_PE_DS_SPI_MOSI_PE ,Pull-up of the MOSI SPI pad enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 17. " PADS_PE_DS_SPI_SCLK_PE ,Pull-up of the SCLK SPI pad enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 16. " PADS_PE_DS_SPI_CS_N_PE ,Pull-up of the CSN SPI pad enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x04 14.--15. " SUBBAND_FLL_SB_FLL_DITHER ,Dithering selection" "No dithering,PN9 positive,PN10 negative,PN9+PN10"
|
|
bitfld.long 0x04 12.--13. " SUBBAND_FLL_SB_FLL_CIC_TAU ,CIC decimator factor" "16,32,64,128"
|
|
newline
|
|
bitfld.long 0x04 11. " SUBBAND_FLL_SB_FLL_PH_4_N8 ,Frequency detector number of phases" "8,4"
|
|
bitfld.long 0x04 8.--10. " SUBBAND_FLL_SB_FLL_WAIT ,CIC samples number before FLL stop" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
bitfld.long 0x04 7. " SYNC_WORD_CORR_EN_SYNC_WORD_CORR ,Sync word bias correction with RSSI detection enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--5. " SYNC_WORD_CORR_SYNC_WORD_BIAS ,Sync word bias" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "RF_REG30,RF Register 30"
|
|
bitfld.long 0x00 30.--31. " RXFIFO_STATUS_BIST_ERRORS ,RX FIFO BIST error indicator" "No error,Checkboard test,Inv checkboard test,Decoder test"
|
|
bitfld.long 0x00 29. " RXFIFO_STATUS_NEAR_UNDERFLOW ,RX FIFO is close to the underflow" "No,Yes"
|
|
newline
|
|
bitfld.long 0x00 28. " RXFIFO_STATUS_NEAR_OVERFLOW ,RX FIFO is close to the overflow" "No,Yes"
|
|
bitfld.long 0x00 27. " RXFIFO_STATUS_UNDERFLOW ,RX FIFO underflow status" "No underflow,Underflow"
|
|
newline
|
|
bitfld.long 0x00 26. " RXFIFO_STATUS_OVERFLOW ,RX FIFO overflow status" "No overflow,Overflow"
|
|
bitfld.long 0x00 25. " RXFIFO_STATUS_FULL ,RX FIFO full" "Not full,Full"
|
|
newline
|
|
bitfld.long 0x00 24. " RXFIFO_STATUS_EMPTY ,RX FIFO empty" "Not empty,Empty"
|
|
bitfld.long 0x00 22.--23. " TXFIFO_STATUS_BIST_ERRORS ,TX FIFO BIST error indicator" "No error,Checkboard test,Inv checkboard test,Decoder test"
|
|
newline
|
|
bitfld.long 0x00 21. " TXFIFO_STATUS_NEAR_UNDERFLOW ,TX FIFO is close to the underflow" "No,Yes"
|
|
bitfld.long 0x00 20. " TXFIFO_STATUS_NEAR_OVERFLOW ,TX FIFO is close to the overflow" "No,Yes"
|
|
newline
|
|
bitfld.long 0x00 19. " TXFIFO_STATUS_UNDERFLOW ,TX FIFO underflow status" "No underflow,Underflow"
|
|
bitfld.long 0x00 18. " TXFIFO_STATUS_OVERFLOW ,TX FIFO overflow status" "No overflow,Overflow"
|
|
newline
|
|
bitfld.long 0x00 17. " TXFIFO_STATUS_FULL ,TX FIFO full" "Not full,Full"
|
|
bitfld.long 0x00 16. " TXFIFO_STATUS_EMPTY ,TX FIFO empty" "Not empty,Empty"
|
|
newline
|
|
bitfld.long 0x00 10. " FSM_STATUS_TX_NRX ,Radio mode" "RX,TX"
|
|
bitfld.long 0x00 8.--9. " FSM_STATUS_STATUS ,FSM status" "Idle,TX mode,RX mode,Suspended"
|
|
newline
|
|
bitfld.long 0x00 2. " FSM_MODE_RX_MODE ,Reception active" "Over,Active"
|
|
bitfld.long 0x00 1. " FSM_MODE_TX_MODE ,Transmission active" "Over,Active"
|
|
wgroup.long 0xC0++0x03
|
|
line.long 0x00 "RF_REG30,RF Register 30"
|
|
hexmask.long.byte 0x00 25.--31. 1. " RXFIFO_STATUS_BIST ,BIST test on the RX FIFO start"
|
|
bitfld.long 0x00 24. " RXFIFO_STATUS_FLUSH ,RX FIFO flush" "No effect,Flushed"
|
|
newline
|
|
hexmask.long.byte 0x00 17.--23. 1. " TXFIFO_STATUS_BIST ,BIST test on the TX FIFO start"
|
|
bitfld.long 0x00 16. " TXFIFO_STATU_FLUSH ,TX FIFO flush" "No effect,Flushed"
|
|
newline
|
|
bitfld.long 0x00 3. " FSM_MODE_RESET ,FSM reset" "No effect,Reset"
|
|
bitfld.long 0x00 2. " FSM_MODE_TX_NRX ,Radio mode selection" "RX,TX"
|
|
newline
|
|
bitfld.long 0x00 0.--1. " FSM_MODE_MODE ,FSM mode selection" "Not activated,Activated,PLL calibration,PLL and TX/RX calibration"
|
|
rgroup.long 0xC4++0x07
|
|
line.long 0x00 "RF_REG31,RF Register 31"
|
|
hexmask.long.byte 0x00 24.--31. 1. " RSSI_MAX-RSSI_MAX ,Maximum RSSI value over a filtering period"
|
|
hexmask.long.byte 0x00 16.--23. 1. " RSSI_MIN_RSSI_MIN ,Minimum RSSI value over a filtering period"
|
|
newline
|
|
hexmask.long.byte 0x00 8.--15. 1. " RXFIFO_COUNT_RX_COUNT ,Number of bytes in the RX FIFO"
|
|
hexmask.long.byte 0x00 0.--7. 1. " TXFIFO_COUNT_TX_COUNT ,Number of bytes in the TX FIFO"
|
|
line.long 0x04 "RF_REG32,RF Register 32"
|
|
bitfld.long 0x04 28.--30. " RX_ATT_LEVEL_RX_ATT_LEVEL_PKT_LVL ,RX attenuation level during the packet reception" "0,1,2,3,4,5,6,7"
|
|
bitfld.long 0x04 24.--26. " RX_ATT_LEVEL_RX_ATT_LEVEL ,RX attenuation level" "0,1,2,3,4,5,6,7"
|
|
newline
|
|
hexmask.long.byte 0x04 16.--23. 1. " RSSI_AVG_RSSI_AVG ,Filtered RSSI value"
|
|
hexmask.long.byte 0x04 8.--15. 1. " DR_ERR_IND_DR_ERR_IND ,Data-rate error indicator"
|
|
newline
|
|
hexmask.long.byte 0x04 0.--7. 1. " RSSI_PKT_RSSI_PKT ,Filtered RSSI value sampled during the packet reception"
|
|
wgroup.long 0xCC++0x03
|
|
line.long 0x00 "RF_TXFIFO,RF TX FIFO Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " TXFIFO_TX_DATA ,Data to be sent"
|
|
rgroup.long 0xD0++0x17
|
|
line.long 0x00 "RF_RXFIFO,RF RX FIFO Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " RXFIFO_RX-DATA ,Received data"
|
|
line.long 0x04 "RF_DESER_STATUS,RF Deserializer Status Register"
|
|
bitfld.long 0x04 7. " DESER_STATUS_SIGNAL_RECEIVING ,Deserializer status" "Off,On"
|
|
bitfld.long 0x04 6. " DESER_STATUS_SYNC_DETECTED ,Sync word/pattern has been detected" "Not detected,Detected"
|
|
newline
|
|
bitfld.long 0x04 5. " DESER_STATUS_WAIT_SYNC ,Deserializer waiting for the sync word" "Not waited,Waited"
|
|
bitfld.long 0x04 4. " DESER_STATUS_IS_ADDRESS ,Received address is broadcast address" "Not broadcast,Broadcast"
|
|
newline
|
|
bitfld.long 0x04 3. " DESER_STATUS_PKT_LEN_ERR ,Packet length is longer than the maximum acceptable packet length" "Not longer,Longer"
|
|
bitfld.long 0x04 2. " DESER_STATUS_ADDRESS_ERR ,Address error status" "No error,Error"
|
|
newline
|
|
bitfld.long 0x04 1. " DESER_STATUS_CRC_ERR ,CRC error status" "No error,Error"
|
|
bitfld.long 0x04 0. " DESER_STATUS_DESER_FINISH ,Deserializer has finished operation" "Not finished,Finished"
|
|
line.long 0x08 "RF_IRQ_STATUS,RF Interrupt Status Register"
|
|
bitfld.long 0x08 5. " IRQ_STATUS_FLAG_RXFIFO ,RF_RXFIFO_IRQ interrupt status" "No interrupt,interrupt"
|
|
bitfld.long 0x08 4. " IRQ_STATUS_FLAG_TXFIFO ,RF_TXFIFO_IRQ interrupt status" "No interrupt,interrupt"
|
|
newline
|
|
bitfld.long 0x08 3. " IRQ_STATUS_FLAG_SYNC ,RF_SYNC_IRQ interrupt status" "No interrupt,interrupt"
|
|
bitfld.long 0x08 2. " IRQ_STATUS_FLAG_RECEIVED ,RF_IRQ_RECEIVED_IRQ interrupt status" "No interrupt,interrupt"
|
|
newline
|
|
bitfld.long 0x08 1. " IRQ_STATUS_FLAG_RXSTOP ,RF_RXSTOP_IRQ interrupt status" "No interrupt,interrupt"
|
|
bitfld.long 0x08 0. " IRQ_STATUS_FLAG_TX ,RF_TX_IRQ interrupt status" "No interrupt,interrupt"
|
|
line.long 0x0C "RF_REG37,RF Register 37"
|
|
hexmask.long.word 0x0C 16.--31. 1. " FEI_PKT_FEI_PKT ,Frequency error indicator sampled during the packet reception"
|
|
hexmask.long.word 0x0C 0.--15. 1. " FEI_FEI_OUT ,Frequency error indicator"
|
|
line.long 0x10 "RF_REG38,RF Register 38"
|
|
hexmask.long.byte 0x10 24.--31. 1. " LINK_QUAL_PKT_LINK_QUALITY_PKT ,Link quality indicator sampled during the packet reception"
|
|
hexmask.long.byte 0x10 16.--23. 1. " LINK_QUAL_LINK_QUALITY ,Instantaneous link quality indicator"
|
|
newline
|
|
hexmask.long.word 0x10 0.--15. 1. " FEI_AFC_FEI_AFC ,Frequency error indicator sampled during the AFC"
|
|
line.long 0x14 "RF_REG39,RF Register 39"
|
|
bitfld.long 0x14 13. " ANALOG-INFO_XTAL_FINISH ,XTAL algorithm has finished" "Not finished,Finished"
|
|
bitfld.long 0x14 12. " ANALOG_INFO_DLL_LOCKED ,DLL locked signal" "0,1"
|
|
newline
|
|
bitfld.long 0x14 11. " ANALOG_INFO_CLK_DIG_READY ,Ready signal of the digital clock" "0,1"
|
|
bitfld.long 0x14 10. " ANALOG_INFO_CLK_PLL_READY ,Ready signal of the PLL clock" "0,1"
|
|
newline
|
|
bitfld.long 0x14 9. " ANALOG_INFO_SUBBAND_HI ,Subband comparator hi status" "0,1"
|
|
bitfld.long 0x14 8. " ANALOG_INFO_SUBBAND_LO ,Subband comparator lo status" "0,1"
|
|
newline
|
|
hexmask.long.byte 0x14 0.--7. 1. " SUBBAND_ERR_SB_FLL_ERR ,Subband center distance"
|
|
rgroup.long 0xFC++0x03
|
|
line.long 0x00 "RF_REVISION,RF Revision Register"
|
|
hexmask.long.byte 0x00 24.--29. 1. " CHIP_ID ,Chip version"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "BLE-BB (Bluetooth Low Energy Baseband)"
|
|
base ad:0x40001400
|
|
width 24.
|
|
tree "Baseband Controller Interface"
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "BBIF_CTRL,Baseband Controller Control Register"
|
|
bitfld.long 0x00 16. " WAKEUP_REQ ,External wake up request" "Not requested,Requested"
|
|
bitfld.long 0x00 4.--9. " CLK_SEL ,Internal baseband controller clock divider" ",,,,,,/6,,/8,,,,/12,,,,/16,,,,,,,,/24,?..."
|
|
bitfld.long 0x00 0. " CLK_ENABLE ,Baseband controller clocks generation clocks enable" "Disabled,Enabled"
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "BBIF_STATUS,Baseband Controller Status Register"
|
|
bitfld.long 0x00 11.--15. " LINK_FORMAT ,Bluetooth low energy link format" "Reset,,Master connect,Slave connect,Low duty cycle advertiser,High duty cycle advertiser,,,Passive scanner,Active scanner,,,,,,Initiator,,,,,,,,,,,,,TX test mode,RX test mode,TX/RX test mode,?..."
|
|
bitfld.long 0x00 4.--8. " LINK_LABEL ,Bluetooth low energy link label""0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x00 3. " AOBLE_STATUS ,Audio over Bluetooth low energy feature status" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 2. " CLK_STATUS ,Current active clock in use" "MASTER_CLK,LOW_POWER_CLK"
|
|
bitfld.long 0x00 1. " OSC_EN ,Oscillator front-end enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " RADIO_EN ,RF front-end enable" "Disabled,Enabled"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "BBIF_COEX_CTRL,RF Coexistence Control Register"
|
|
bitfld.long 0x00 4. " TX ,TX activity performance status" "Not performed,Performed"
|
|
bitfld.long 0x00 0. " RX ,RX activity performance status" "Not performed,Performed"
|
|
rgroup.long 0x0C++0x03
|
|
line.long 0x00 "BBIF_COEX_STATUS,RF Coexistence Status Register"
|
|
bitfld.long 0x00 12.--15. " BLE_PTI ,Current Bluetooth baseband core activity priority" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 8. " BLE_IN_PROCESS ,Bluetooth baseband core has an event in process indicator" "Not indicated,Indicated"
|
|
bitfld.long 0x00 4. " BLE_TX ,Bluetooth baseband core is busy and performs TX activity indicator" "Not indicated,Indicated"
|
|
newline
|
|
bitfld.long 0x00 0. " BLE_RX ,Bluetooth baseband core is busy and performs RX activity indicator" "Not indicated,Indicated"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "BBIF_COEX_INT_CFG,RF Coexistence Interrupt Configuration Register"
|
|
bitfld.long 0x00 8.--9. " BLE_IN_PROCESS_EVENT ,BLE_IN_PROCESS event interrupt configuration" "Not triggered,Rising edge,Falling edge,Any edge"
|
|
bitfld.long 0x00 4.--5. " BLE_TX_EVENT ,BLE_TX event interrupt configuration" "Not triggered,Rising edge,Falling edge,Any edge"
|
|
bitfld.long 0x00 0.--1. " BLE_RX_EVENT ,BLE_RX event interrupt configuration" "Not triggered,Rising edge,Falling edge,Any edge"
|
|
rgroup.long 0x14++0x03
|
|
line.long 0x00 "BBIF_COEX_INT_STATUS,RF Coexistence Interrupt Status Register"
|
|
bitfld.long 0x00 4. " BLE_TX_EVENT_FLAG ,BLE_TX_EVENT interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 0. " BLE_RX_EVENT_FLAG ,BLE_RX_EVENT interrupt status" "No interrupt,Interrupt"
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "BBIF_SYNC_CFG,Bluetooth Low Energy Technology And RF Link Synchronization Configuration Register"
|
|
bitfld.long 0x00 17. " RF_RX ,RF front-end audio link reception status" "Not received,Received"
|
|
bitfld.long 0x00 16. " RF_ACTIVE ,RF front-end audio link processing status" "Not processed,Processed"
|
|
bitfld.long 0x00 11.--15. " LINK_FORMAT ,Bluetooth low energy link format for synchronization" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
newline
|
|
bitfld.long 0x00 4.--8. " LINK_LABEL ,Bluetooth low energy link label for synchronization" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x00 1.--3. " SOURCE ,BLE/RF link synchronization source" "BB_SYNC_P,AUDIO0_SYNC_P,AUDIO1_SYNC_P,AUDIO2_SYNC_P,RF_SYNC_P,TX_EN,?..."
|
|
bitfld.long 0x00 0. " ENABLE ,Frame synchronization pulse filter enable" "Disabled,Enabled"
|
|
tree.end
|
|
base ad:0x40001500
|
|
tree "Baseband Controller"
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "BB_RWBBCNTL,Baseband Control Register"
|
|
bitfld.long 0x00 31. " MASTER_SOFT_RST ,Complete system reset except registers and timing generator" "No reset,Reset"
|
|
bitfld.long 0x00 30. " MASTER_TGSOFT_RST ,Timing generator reset" "No reset,Reset"
|
|
bitfld.long 0x00 29. " REG_SOFT_RST ,Complete register block reset" "No reset,Reset"
|
|
newline
|
|
bitfld.long 0x00 28. " SWINT_REQ ,BLE_SW_IRQ generation force" "Not forced,Forced"
|
|
bitfld.long 0x00 26. " RFTEST_ABORT ,Current RF testing defined as per CS-FORMAT abort" "Not aborted,Aborted"
|
|
bitfld.long 0x00 25. " ADVERT_ABORT ,Current scan window abort" "Not aborted,Aborted"
|
|
newline
|
|
bitfld.long 0x00 24. " SCAN_ABORT ,Current advertising event abort" "Not aborted,Aborted"
|
|
bitfld.long 0x00 22. " MD_DSB ,Single TX/RX exchange whatever th MD bits are allowance" "Not allowed,Allowed"
|
|
bitfld.long 0x00 21. " SN_DSB ,Sequence number management disable" "No,Yes"
|
|
newline
|
|
bitfld.long 0x00 20. " NESN_DSB ,Acknowledge scheme disable" "No,Yes"
|
|
bitfld.long 0x00 19. " CRYPT_DSB ,Encryption/decryption disable" "No,Yes"
|
|
bitfld.long 0x00 18. " WHIT_DSB ,Whitening disable" "No,Yes"
|
|
newline
|
|
bitfld.long 0x00 17. " CRC_DSB ,CRC stripping disable" "No,Yes"
|
|
bitfld.long 0x00 16. " HOP_REMAP_DSB ,Frequency hopping remapping algorithm disable" "No,Yes"
|
|
bitfld.long 0x00 9. " ADVERTFILT_EN ,Advertising channels error filtering enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 8. " RWBLE_EN ,Bluetooth baseband core exchange table pre-fetch mechanism enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " RXWINSZDEF ,Default RX window size in us" "0 us,1 us,2 us,3 us,4 us,5 us,6 us,7 us,8 us,9 us,10 us,11 us,12 us,13 us,14 us,15 us"
|
|
bitfld.long 0x00 0.--2. " SYNCERR ,Maximum number of errors allowed to recognize the synchronization word" "0,1,2,3,4,5,6,7"
|
|
rgroup.long 0x04++0x07
|
|
line.long 0x00 "BB_VERSION,Bluetooth Low Energy Revision Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " TYP ,Bluetooth baseband core type"
|
|
hexmask.long.byte 0x00 16.--23. 1. " REL ,Bluetooth baseband core major release number"
|
|
hexmask.long.byte 0x00 8.--15. 1. " UPG ,Bluetooth baseband core upgrade number"
|
|
newline
|
|
hexmask.long.byte 0x00 0.--7. 1. " BUILD ,Bluetooth baseband core build number"
|
|
newline
|
|
line.long 0x04 "BB_RWBLEBCONF,Baseband Configuration Register"
|
|
bitfld.long 0x04 31. " DMMODE ,Bluetooth baseband core dual mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 24.--25. " ISOPORTNB ,Supported isochronous channels number" "0,1,2,3"
|
|
bitfld.long 0x04 23. " DECIPHER ,AES deciphering presence" "Not present,Present"
|
|
newline
|
|
bitfld.long 0x04 21. " COEX ,RF coexistence mechanism presence" "Not present,Present"
|
|
bitfld.long 0x04 16.--20. " RFIF ,RF front-end support" "Ripple RF,External radio controller support,Atlas radio,IcyTRx radio,?..."
|
|
bitfld.long 0x04 15. " USEDBG ,Diagnostic port" "Not instantiated,Instantiated"
|
|
newline
|
|
bitfld.long 0x04 14. " USECRYPT ,AES-CCM encryption presence" "Not present,Present"
|
|
bitfld.long 0x04 8.--13. " CLK_SEL ,Operating frequency in MHz" "0 MHz,1 MHz,2 MHz,3 MHz,4 MHz,5 MHz,6 MHz,7 MHz,8 MHz,9 MHz,10 MHz,11 MHz,12 MHz,13 MHz,14 MHz,15 MHz,16 MHz,17 MHz,18 MHz,19 MHz,20 MHz,21 MHz,22 MHz,23 MHz,24 MHz,25 MHz,26 MHz,27 MHz,28 MHz,29 MHz,30 MHz,31 MHz,32 MHz,33 MHz,34 MHz,35 MHz,36 MHz,37 MHz,38 MHz,39 MHz,40 MHz,41 MHz,42 MHz,43 MHz,44 MHz,45 MHz,46 MHz,47 MHz,48 MHz,49 MHz,50 MHz,51 MHz,52 MHz,53 MHz,54 MHz,55 MHz,56 MHz,57 MHz,58 MHz,59 MHz,60 MHz,61 MHz,62 MHz,63 MHz"
|
|
bitfld.long 0x04 7. " INTMODE ,Interruption mode" "Edge level,Trigger level"
|
|
newline
|
|
bitfld.long 0x04 6. " BUSTYPE ,Processor bus type" "AHB,AXBAR"
|
|
bitfld.long 0x04 5. " DATA_WIDTH ,Processor bus width" "16 bits,32 bits"
|
|
bitfld.long 0x04 0.--4. " ADD_WIDTH ,BLE_ADDRESS_WIDTH parameter value converted into binary" ",,,,,,,,,,,,,,16 KB,?..."
|
|
newline
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "BB_INTCNTL,Interrupts Control Register"
|
|
bitfld.long 0x00 15. " CSCNTDEVMSK ,CSCNT interrupts during events mask" "Masked,Not masked"
|
|
bitfld.long 0x00 12. " AUDIOINT2MSK ,Audio channel 2 interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 11. " AUDIOINT1MSK ,Audio channel 1 interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 10. " AUDIOINT0MSK ,Audio channel 0 interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 9. " SWINTMSK ,SW triggered interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 8. " EVENTAPFAINTMSK ,End of event / anticipated pre-fetch abort interrupt mask" "Not masked,Masked"
|
|
newline
|
|
bitfld.long 0x00 7. " FINETGTIMINTMSK ,Fine target timer mask" "Masked,Not masked"
|
|
bitfld.long 0x00 6. " GROSSTGTIMINTMSK ,Gross target timer mask" "Masked,Not masked"
|
|
bitfld.long 0x00 5. " ERRORINTMSK ,Error interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 4. " CRYPTINTMSK ,Encryption engine interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 3. " EVENTINTMSK ,End of event interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 2. " SLPINTMSK ,Sleep mode interrupt mask" "Masked,Not masked"
|
|
newline
|
|
bitfld.long 0x00 1. " RXINTMSK ,RX interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x00 0. " CSCNTINTMSK ,625 us base time interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x10++0x07
|
|
line.long 0x00 "BB_INTSTAT,Interrupts Status Register"
|
|
bitfld.long 0x00 12. " AUDIOINT2STAT ,Audio channel 2 interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 11. " AUDIOINT1STAT ,Audio channel 1 interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 10. " AUDIOINT0STAT ,Audio channel 0 interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 9. " SWINTSTAT ,SW triggered interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 8. " EVENTAPFAINTSTAT ,End of event / anticipated pre-fetch abort interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 7. " FINETGTIMINTSTAT ,Masked fine target timer error interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 6. " GROSSTGTIMINTSTAT ,Masked gross target timer error interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 5. " ERRORINTSTAT ,Masked error interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 4. " CRYPTINTSTAT ,Masked encryption engine interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 3. " EVENTINTSTAT ,Masked end of event interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 2. " SLPINTSTAT ,Masked sleep interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 1. " RXINTSTAT ,Masked packet reception interrupt status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x00 0. " CSCNTINTSTAT ,Masked 625 us base time reference interrupt status" "No interrupt,Interrupt"
|
|
line.long 0x04 "BB_INTRAWSTAT,Interrupts Raw Status Register"
|
|
bitfld.long 0x04 12. " AUDIOINT2RAWSTAT ,Audio channel 2 interrupt raw status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 11. " AUDIOINT1RAWSTAT ,Audio channel 1 interrupt raw status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 10. " AUDIOINT0RAWSTAT ,Audio channel 0 interrupt raw status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 9. " SWINTRAWSTAT ,SW triggered interrupt raw status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 8. " EVENTAPFAINTRAWSTAT ,End of event / anticipated pre-fetch abort interrupt raw status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 7. " FINETGTIMINTRAWSTAT ,Masked fine target timer error interrupt raw status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 6. " GROSSTGTIMINTRAWSTAT ,Masked gross target timer error interrupt raw status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 5. " ERRORINTRAWSTAT ,Masked error interrupt raw status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 4. " CRYPTINTRAWSTAT ,Masked encryption engine interrupt raw status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 3. " EVENTINTRAWSTAT ,Masked end of event interrupt raw status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 2. " SLPINTRAWSTAT ,Masked sleep interrupt raw status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 1. " RXINTRAWSTAT ,Masked packet reception interrupt raw status" "No interrupt,Interrupt"
|
|
newline
|
|
bitfld.long 0x04 0. " CSCNTINTRAWSTAT ,Masked 625 us base time reference interrupt raw status" "No interrupt,Interrupt"
|
|
group.long 0x18++0x07
|
|
line.long 0x00 "BB_INTACK,Interrupts Acknowledgement Register"
|
|
rbitfld.long 0x00 12. " AUDIOINT2ACK ,Audio channel 2 interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
rbitfld.long 0x00 11. " AUDIOINT1ACK ,Audio channel 1 interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
rbitfld.long 0x00 10. " AUDIOINT0ACK ,Audio channel 0 interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
newline
|
|
eventfld.long 0x00 9. " SWINTACK ,SW triggered interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
eventfld.long 0x00 8. " EVENTAPFAINTACK ,End of event / anticipated pre-fetch abort interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
eventfld.long 0x00 7. " FINETGTIMINTACK ,Fine target timer interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
newline
|
|
eventfld.long 0x00 6. " GROSSTGTIMINTACK ,Gross target timer interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
eventfld.long 0x00 5. " ERRORINTACK ,Error interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
eventfld.long 0x00 4. " CRYPTINTACK ,Encryption engine interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
newline
|
|
eventfld.long 0x00 3. " EVENTINTACK ,End of event interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
eventfld.long 0x00 2. " SLPINTACK ,End of deep sleep interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
eventfld.long 0x00 1. " RXINTACK ,Packet reception interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
newline
|
|
eventfld.long 0x00 0. " CSCNTINTACK ,625 us base time reference interrupt acknowledgement bit" "Not acknowledged,Acknowledged"
|
|
line.long 0x04 "BB_BASETIMECNT,Base Timer Configuration Register"
|
|
bitfld.long 0x04 31. " SAMP ,Base time counter sample" "Not sampled,Sampled"
|
|
hexmask.long 0x04 0.--26. 1. " BASETIMECNT ,625 us base time reference counter value"
|
|
rgroup.long 0x20++0x03
|
|
line.long 0x00 "BB_FINETIMECNT,Fine Timer Configuration Register"
|
|
hexmask.long.word 0x00 0.--9. 1. " FINECNT ,Current us fine time reference counter"
|
|
group.long 0x24++0x13
|
|
line.long 0x00 "BB_BDADDRL,Bluetooth Low Energy Device Address (LSB Part) Register"
|
|
line.long 0x04 "BB_BDADDRU,Bluetooth Low Energy Device Address (MSB Part) Register"
|
|
bitfld.long 0x04 16. " PRIV_NPUB ,Bluetooth low energy device address privacy indicator" "Public,Private"
|
|
hexmask.long.word 0x04 0.--15. 0x01 " BDADDRU ,Bluetooth low energy device address (MSB part)"
|
|
line.long 0x08 "BB_ET_CURRENTRXDESCPTR,RX Description Pointer Register"
|
|
hexmask.long.word 0x08 16.--31. 0x01 " ETPTR ,Exchange table pointer determining the starting point of the exchange table"
|
|
hexmask.long.word 0x08 0.--14. 0x01 " CURRENTRXDESCPTR ,RX descriptor pointer determining the starting point of the receive buffer chained list"
|
|
line.long 0x0C "BB_DEEPSLCNTL,Deep Sleep Control Register"
|
|
bitfld.long 0x0C 31. " EXTWKUPDSB ,External wakeup disable" "No,Yes"
|
|
rbitfld.long 0x0C 15. " DEEP_SLEEP_STAT ,Current deep sleep clock mux status" "Disabled,Enabled"
|
|
bitfld.long 0x0C 4. " SOFT_WAKEUP_REQ ,Bluetooth baseband software wake up request application in deep sleep mode" "Not applied,Applied"
|
|
newline
|
|
bitfld.long 0x0C 3. " DEEP_SLEEP_CORR_EN ,625 us base time reference integer and fractional part correction after deep sleep mode wake-up" "Disabled,Enabled"
|
|
bitfld.long 0x0C 2. " DEEP_SLEEP_ON ,Bluetooth baseband core power mode control" "Disabled,Enabled"
|
|
bitfld.long 0x0C 1. " RADIO_SLEEP_EN ,Radio module control" "Enabled,Disabled"
|
|
newline
|
|
bitfld.long 0x0C 0. " OSC_SLEEP_IN ,RF high frequency crystal oscillator" "Enabled,Disabled"
|
|
line.long 0x10 "BB_DEEPSLWKUP,Deep Sleep Control Register"
|
|
rgroup.long 0x38++0x03
|
|
line.long 0x00 "BB_DEEPSLSTAT,Deep Sleep Status Register"
|
|
group.long 0x3C++0x0B
|
|
line.long 0x00 "BB_ENBPRESET,Stabilization Times Register"
|
|
hexmask.long.word 0x00 10.--20. 1. " TWOSC ,Time allowed for stabilization of the high frequency oscillator when the deep-sleep mode has been left due to sleep-timer expiry in low power oscillator cycles"
|
|
line.long 0x04 "BB_FINECNTCORR,Fine Timer Correction Register"
|
|
hexmask.long.word 0x04 0.--9. 1. " FINECNTCORR ,Phase correction value for the 625 us reference counter in us"
|
|
line.long 0x08 "BB_BASETIMECNTCORR,Base Timer Correction Register"
|
|
hexmask.long 0x08 0.--26. 1. " BASETIMECNTCORR ,Base time counter correction value"
|
|
group.long 0x50++0x03
|
|
line.long 0x00 "BB_DIAGCNTL,Diagnostic Ports Control Register"
|
|
bitfld.long 0x00 31. " DIAG3_EN ,Diagnostic port 3 output enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 24.--29. " DIAG3 ,Outputs that must be driven to the diagnostic port 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 23. " DIAG2_EN ,Diagnostic port 2 output enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 16.--21. " DIAG2 ,Outputs that must be driven to the diagnostic port 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 15. " DIAG1_EN ,Diagnostic port 1 output enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8.--13. " DIAG1 ,Outputs that must be driven to the diagnostic port 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
newline
|
|
bitfld.long 0x00 7. " DIAG0_EN ,Diagnostic port 0 output enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--5. " DIAG0 ,Outputs that must be driven to the diagnostic port 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
rgroup.long 0x54++0x03
|
|
line.long 0x00 "BB_DIAGSTAT,Diagnostic Ports Status Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " DIAG3STAT ,BLE_DBG3[7:0] value"
|
|
hexmask.long.byte 0x00 16.--23. 1. " DIAG2STAT ,BLE_DBG2[7:0] value"
|
|
hexmask.long.byte 0x00 8.--15. 1. " DIAG1STAT ,BLE_DBG1[7:0] value"
|
|
newline
|
|
hexmask.long.byte 0x00 0.--7. 1. " DIAG0STAT ,BLE_DBG0[7:0] value"
|
|
group.long 0x58++0x07
|
|
line.long 0x00 "BB_DEBUGADDMAX,Diagnostic Ports Upper Limit Register"
|
|
hexmask.long.word 0x00 16.--31. 0x01 " REG_ADDMAX ,Register zone upper limit"
|
|
hexmask.long.word 0x00 0.--15. 0x01 " EM_ADDMAX ,Exchange memory zone upper limit"
|
|
line.long 0x04 "BB_DEBUGADDMIN,Diagnostic Ports Lower Limit Register"
|
|
hexmask.long.word 0x04 16.--31. 0x01 " REG_ADDMIN ,Register zone lower limit"
|
|
hexmask.long.word 0x04 0.--15. 0x01 " EM_ADDMIN ,Exchange memory zone lower limit"
|
|
rgroup.long 0x60++0x03
|
|
line.long 0x00 "BB_ERRORTYPESTAT,Diagnostic Ports Errors Register"
|
|
bitfld.long 0x00 19. " RAL_UNDERRUN ,Resolving Address List engine underrun issue indicator" "No error,Error"
|
|
bitfld.long 0x00 18. " RAL_ERROR ,Resolving Address List engine faced a bad setting indicator" "No error,Error"
|
|
bitfld.long 0x00 17. " CONCEVTIRQ_ERR ,Two consecutive and concurrent BLE_EVENT_IRQ have been generated and not acknowledged in time by the Bluetooth baseband software indicator" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 16. " RXDATA_PTR_ERROR ,RX data buffer pointer null value failure indicator" "No error,Error"
|
|
bitfld.long 0x00 15. " TXDATA_PTR_ERROR ,TX data buffer pointer null value failure indicator" "No error,Error"
|
|
bitfld.long 0x00 14. " RXDESC_EMPTY_ERROR ,RX descriptor pointer null value failure indicator" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 13. " TXDESC_EMPTY_ERROR ,TX descriptor pointer null value failure indicator" "No error,Error"
|
|
bitfld.long 0x00 12. " CSFORMAT_ERROR ,CS-FORMAT invalid value failure indicator" "No error,Error"
|
|
bitfld.long 0x00 11. " LLCHMAP_ERROR ,Link Layer channel map error indicator" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 10. " ADV_UNDERRUN ,Advertising interval underrun indicator" "No error,Error"
|
|
bitfld.long 0x00 9. " IFS_UNDERRUN ,Inter frame space underrun indicator" "No error,Error"
|
|
bitfld.long 0x00 8. " WHITELIST_ERROR ,White list timeout error indicator" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 7. " EVT_CNTL_APFM_ERROR ,Anticipated pre-fetch mechanism error indicator" "No error,Error"
|
|
bitfld.long 0x00 6. " EVT_SCHDL_APFM_ERROR ,Anticipated pre-fetch mechanism error indicator" "No error,Error"
|
|
bitfld.long 0x00 5. " EVT_SCHDL_ENTRY_ERROR ,Invalid timing programming on two consecutive ET entries faced by event scheduler error indicator" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 4. " EVT_SCHDL_EMACC_ERROR ,Event scheduler exchange memory access error indicator" "No error,Error"
|
|
bitfld.long 0x00 3. " RADIO_EMACC_ERROR ,Radio controller exchange memory access error indicator" "No error,Error"
|
|
bitfld.long 0x00 2. " PKTCNTL_EMACC_ERROR ,Packet controller exchange memory access error indicator" "No error,Error"
|
|
newline
|
|
bitfld.long 0x00 1. " RXCRYPT_ERROR ,Real time decryption error indicator" "No error,Error"
|
|
bitfld.long 0x00 0. " TXCRYPT_ERROR ,Real timer encryption error indicator" "No error,Error"
|
|
group.long 0x64++0x03
|
|
line.long 0x00 "BB_SWPROFILING,Software Profiling Register"
|
|
group.long 0x70++0x0B
|
|
line.long 0x00 "BB_RADIOCNTL0,Radio Interface Principal Control Register"
|
|
hexmask.long.word 0x00 16.--31. 0x01 " SPIPTR ,Buffer containing data to be transferred to or received from the SPI port"
|
|
bitfld.long 0x00 4.--5. " SPIFREQ ,SPI clock frequency" "master1_gclk/3,?..."
|
|
rbitfld.long 0x00 1. " SPICOMP ,SPI transfer status" "In progress,Completed"
|
|
newline
|
|
bitfld.long 0x00 0. " SPIGO ,SPI transfer start" "No effect,Started"
|
|
line.long 0x04 "BB_RADIOCNTL1,Radio Interface Second Control Register"
|
|
bitfld.long 0x04 31. " FORCEAGC_EN ,Control ATLAS / ripple AGC force mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 30. " FORCEBLEIQ ,Control ripple modulation mode" "FM,I and Q"
|
|
hexmask.long.word 0x04 16.--27. 1. " FORCEAGC_LENGTH ,Control ATLAS / ripple AGC force mode"
|
|
newline
|
|
bitfld.long 0x04 15. " SYNC_PULSE_MODE ,SYNC_P pulse generation mode" "Pulse,Level"
|
|
bitfld.long 0x04 13. " DPCORR_EN ,Delayed DC compensated data path in radio correlator block usage enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 12. " JEF_SELECT ,Jitter elimination FIFO selection" "0,1"
|
|
newline
|
|
bitfld.long 0x04 4.--8. " XRFSEL ,Extended radio selection" "No radio,,,Integrated radio,?..."
|
|
hexmask.long.byte 0x04 0.--3. 1. " SUBVERSION ,CSEM RF sub-version selection"
|
|
line.long 0x08 "BB_RADIOCNTL2,Radio Interface Third Control Register"
|
|
hexmask.long.word 0x08 0.--15. 0x01 " FREQTABLE_PTR ,Frequency table pointer"
|
|
group.long 0x80++0x07
|
|
line.long 0x00 "BB_RADIOPWRUPDN0,Radio Interface Power-Up/Down Delays Principal Control Register"
|
|
hexmask.long.byte 0x00 16.--23. 1. " RXPWRUP0 ,RX power up phase for the current radio device length in us"
|
|
bitfld.long 0x00 8.--12. " TXPWRDN0 ,TX power down phase for the current radio device length extension in us" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
hexmask.long.byte 0x00 0.--7. 1. " TXPWRUP0 ,TX power up phase for the current radio device length in us"
|
|
line.long 0x04 "BB_RADIOPWRUPDN1,Radio Interface Power-Up/Down Delays Second Control Register"
|
|
hexmask.long.byte 0x04 16.--23. 1. " RXPWRUP1 ,RX power up phase for the current radio device length in us"
|
|
bitfld.long 0x04 8.--12. " TXPWRDN1 ,TX power down phase for the current radio device length extension in us" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
hexmask.long.byte 0x04 0.--7. 1. " TXPWRUP1 ,TX power up phase for the current radio device length in us"
|
|
group.long 0x90++0x07
|
|
line.long 0x00 "BB_RADIOTXRXTIM0,Radio Interface Timing Compensation Delays Principal Control Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " TXPATHDLY0 ,TX path delay 0"
|
|
bitfld.long 0x00 16.--20. " RXPATHDLY0 ,RX path delay 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
hexmask.long.byte 0x00 8.--14. 1. " RFRXTMDA0 ,RFRXTMDA0"
|
|
newline
|
|
hexmask.long.byte 0x00 0.--6. 1. " SYNC_POSITION0 ,Sync position 0"
|
|
line.long 0x04 "BB_RADIOTXRXTIM1,Radio Interface Timing Compensation Delays Second Control Register"
|
|
hexmask.long.byte 0x04 24.--31. 1. " TXPATHDLY1 ,TX path delay 1"
|
|
bitfld.long 0x04 16.--20. " RXPATHDLY1 ,RX path delay 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
hexmask.long.byte 0x04 8.--14. 1. " RFRXTMDA1 ,RFRXTMDA1"
|
|
newline
|
|
hexmask.long.byte 0x04 0.--6. 1. " SYNC_POSITION1 ,Sync position 1"
|
|
group.long 0xA0++0x0B
|
|
line.long 0x00 "BB_SPIPTRCNTL0,Radio Interface SPI Pointers First Control Register"
|
|
hexmask.long.word 0x00 16.--31. 0x01 " TXOFFPTR ,TXOFF sequence address section pointer"
|
|
hexmask.long.word 0x00 0.--15. 0x01 " TXONPTR ,TXON sequence address section pointer"
|
|
line.long 0x04 "BB_SPIPTRCNTL1,Radio Interface SPI Pointers Second Control Register"
|
|
hexmask.long.word 0x04 16.--31. 0x01 " RXOFFPTR ,RXOFF sequence address section pointer"
|
|
hexmask.long.word 0x04 0.--15. 0x01 " RXONPTR ,RXON sequence address section pointer"
|
|
line.long 0x08 "BB_SPIPTRCNTL2,Radio Interface SPI Pointers Third Control Register"
|
|
hexmask.long.word 0x08 0.--15. 0x01 " RSSIPTR ,RSSI read sequence address section pointer"
|
|
group.long 0xB0++0x03
|
|
line.long 0x00 "BB_ADVCHMAP,Advertising Channel Map Register"
|
|
bitfld.long 0x00 0.--2. " ADVCHMAP ,Advertising channel map" "0,1,2,3,4,5,6,7"
|
|
group.long 0xC0++0x03
|
|
line.long 0x00 "BB_ADVTIM,Delay Information Register Handling Advertising Event Timers"
|
|
hexmask.long.word 0x00 0.--13. 1. " ADVINT ,Advertising packet interval in us"
|
|
rgroup.long 0xC4++0x03
|
|
line.long 0x00 "BB_ACTSCANSTAT,Active Scan Mode Control Register"
|
|
hexmask.long.word 0x00 16.--24. 1. " BACKOFF ,Active scan mode back-off counter initialization value"
|
|
hexmask.long.word 0x00 0.--8. 1. " UPPERLIMIT ,Active scan mode upper limit counter value"
|
|
group.long 0xD0++0x0B
|
|
line.long 0x00 "BB_BB_WLPUBADDPTR,Address Pointer Of Public Devices Register"
|
|
hexmask.long.word 0x00 0.--15. 0x01 " WLPUBADDPTR ,Start address pointer of the public devices white list"
|
|
line.long 0x04 "BB_WLPRIVADDPTR,Address Pointer Of Private Devices Register"
|
|
hexmask.long.word 0x04 0.--15. 0x01 " WLPRIVADDPTR ,Start address pointer of the private devices white list"
|
|
line.long 0x08 "BB_WLNBDEV,Devices In White List Register"
|
|
hexmask.long.byte 0x08 8.--15. 1. " NBPRIVDEV ,Number of private devices in the white list"
|
|
hexmask.long.byte 0x08 0.--7. 1. " NBPUBDEV ,Number of public devices in the white list"
|
|
group.long 0xE0++0x17
|
|
line.long 0x00 "BB_AESCNTL,AES-128 Ciphering Control Register"
|
|
bitfld.long 0x00 1. " AES_MODE ,Cipher mode" "Cipher,Not implemented"
|
|
bitfld.long 0x00 0. " AES_START ,AES-128 ciphering process start" "Not started,Started"
|
|
line.long 0x04 "BB_AESKEY31_0,AES Encryption 128-Bit Key Bits 31:0 Register"
|
|
line.long 0x08 "BB_AESKEY63_32,AES Encryption 128-Bit Key Bits 63:32 Register"
|
|
line.long 0x0C "BB_AESKEY95_64,AES Encryption 128-Bit Key Bits 95:64 Register"
|
|
line.long 0x10 "BB_AESKEY127_96,AES Encryption 128-Bit Key Bits 127:96 Register"
|
|
line.long 0x14 "BB_AESPTR,AES Memory Zone Pointer Register"
|
|
rgroup.long 0xF8++0x07
|
|
line.long 0x00 "BB_TXMICVAL,AES-CCM Plain MIC TX Value Register"
|
|
line.long 0x04 "BB_RXMICVAL,AES-CCM Plain MIC RX Value Register"
|
|
group.long 0x100++0x0B
|
|
line.long 0x00 "BB_RFTESTCNTL,RF Testing And Regulatory Body Support Register"
|
|
bitfld.long 0x00 31. " INFINITERX ,Infinite RX window enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 27. " RXPKTCNTEN ,RX packet count enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 15. " INFINITETX ,Infinite TX packet enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 14. " TXLENGTHSRC ,Packet length control mode" "TxDESC-TXADVLEN,RFTESTCTRL-TXLENGTH"
|
|
bitfld.long 0x00 13. " PRBSTYPE ,TX packet payload type" "PRBS9,PRBS15"
|
|
bitfld.long 0x00 12. " TXPLDSRC ,TX packet payload source selection" "Control structure,PRBS generator"
|
|
newline
|
|
bitfld.long 0x00 11. " TXPKTCNTEN ,TX packet count enable" "Disabled,Enabled"
|
|
hexmask.long.word 0x00 0.--8. 1. " TXLENGTH ,TX packet length in number of bytes"
|
|
line.long 0x04 "BB_RFTESTTXSTAT,Number Of Transmitted Packets During Test Modes Register"
|
|
line.long 0x08 "BB_RFTESTRXSTAT,Number Of Correctly Received Packets During Test Modes Register"
|
|
group.long 0x110++0x0B
|
|
line.long 0x00 "BB_TIMGENCNTL,Timing Generator Control Register"
|
|
bitfld.long 0x00 31. " APFM_EN ,Anticipated pre-fetch abort mechanism enable" "Disabled,Enabled"
|
|
hexmask.long.word 0x00 16.--25. 1. " PREFETCHABORT_TIME ,Instant in us at which immediate abort is required after anticipated pre-fetch abort"
|
|
hexmask.long.word 0x00 0.--8. 1. " PREFETCH_TIME ,Exchange table pre-fetch instant in us"
|
|
line.long 0x04 "BB_GROSSTIMTGT,Gross Timer Control Register"
|
|
hexmask.long.tbyte 0x04 0.--22. 1. " GROSSTARGET ,Gross timer target value on which a BLE_GROSSTGTIM_IRQ must be generated"
|
|
line.long 0x08 "BB_FINETIMTGT,Fine Timer Control Register"
|
|
hexmask.long 0x08 0.--26. 1. " FINETARGET ,Fine target value on which a BLE_FINETGTIM_IRG must be generated"
|
|
group.long 0x120++0x13
|
|
line.long 0x00 "BB_COEXIFCNTL0,RF Coexistence Control Register 0"
|
|
bitfld.long 0x00 24.--25. " MWSSCANFREQMSK ,MWS_SCAN_FREQUENCY impact on Bluetooth low energy technology TX and RX" "No impact,TX stop/RX no impact,TX no impact/RX stop,TX stop/RX stop"
|
|
bitfld.long 0x00 20.--21. " WLCRXPRIOMODE ,Bluetooth low energy technology packet BLE_RX mode behavior" "RX w/o delay,RX w/ delay,RX high priority,?..."
|
|
bitfld.long 0x00 16.--17. " WLCTXPRIOMODE ,Bluetooth low energy technology packet BLE_TX mode behavior" "TX w/o delay,TX w/ delay,TX high priority,?..."
|
|
newline
|
|
bitfld.long 0x00 14.--15. " MWSTXFREQMSK ,MWS TX frequency impact on Bluetooth low energy technology TX and RX" "No impact,TX stop/RX no impact,TX no impact/RX stop,TX stop/RX stop"
|
|
bitfld.long 0x00 12.--13. " MWSRXFREQMSK ,MWS RX frequency impact on Bluetooth low energy technology TX and RX" "No impact,TX stop/RX no impact,TX no impact/RX stop,TX stop/RX stop"
|
|
bitfld.long 0x00 10.--11. " MWSTXMSK ,MWS_TX impact on Bluetooth low energy technology TX and RX" "No impact,TX stop/RX no impact,TX no impact/RX stop,TX stop/RX stop"
|
|
newline
|
|
bitfld.long 0x00 8.--9. " MWSRXMSK ,MWS_RX impact on Bluetooth low energy technology TX and RX" "No impact,TX stop/RX no impact,TX no impact/RX stop,TX stop/RX stop"
|
|
bitfld.long 0x00 6.--7. " TXMSK ,TX impact on Bluetooth low energy technology TX and RX" "No impact,TX stop/RX no impact,TX no impact/RX stop,TX stop/RX stop"
|
|
bitfld.long 0x00 4.--5. " RXMSK ,RX impact on Bluetooth low energy technology TX and RX" "No impact,TX stop/RX no impact,TX no impact/RX stop,TX stop/RX stop"
|
|
newline
|
|
bitfld.long 0x00 3. " MWSWCI_EN ,WCI MWS coexistence interface control enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " MWSCOEX_EN ,MWS coexistence control control enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " SYNCGEN_EN ,BLE_SYNC generation" "Not generated,Generated"
|
|
newline
|
|
bitfld.long 0x00 0. " COEX_EN ,MWS/RF coexistence control control enable" "Disabled,Enabled"
|
|
line.long 0x04 "BB_COEXIFCNTL1,RF Coexistence Control Register 1"
|
|
bitfld.long 0x04 24.--28. " WLCPRXTHR ,RX priority setting threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x04 16.--20. " WLCPTXTHR ,TX priority setting threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
hexmask.long.byte 0x04 8.--14. 1. " WLCPDURATION ,Priority information maintenance period"
|
|
newline
|
|
hexmask.long.byte 0x04 0.--6. 1. " WLCPDELAY ,WLCP delay"
|
|
line.long 0x08 "BB_COEXIFCNTL2,RF Coexistence Control Register 2"
|
|
bitfld.long 0x08 8.--11. " RX_ANT_DELAY ,Anticipated BT_RX delay in us" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x08 0.--3. " TX_ANT_DELAY ,Anticipated BT_TX delay in us" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x0C "BB_BBMPRIO0,Priority Control Register 0"
|
|
bitfld.long 0x0C 28.--31. " BLEM7 ,Passive scanning priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 24.--27. " BLEM6 ,Non-connectable advertising priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 20.--23. " BLEM5 ,Connectable advertising Bluetooth low energy technology message priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x0C 16.--19. " BLEM4 ,Active Scanning Bluetooth low energy technology message priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 12.--15. " BLEM3 ,Scanning Bluetooth low energy technology message priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 8.--11. " BLEM2 ,Data channel transmission Bluetooth low energy technology message priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
newline
|
|
bitfld.long 0x0C 4.--7. " BLEM1 ,Data channel transmission Bluetooth low energy technology message priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x0C 0.--3. " BLEM0 ,Connection request response Bluetooth low energy technology message priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x10 "BB_BBMPRIO1,Priority Control Register 1"
|
|
bitfld.long 0x10 28.--31. " BLEMDEFAULT ,Bluetooth low energy technology other messages default priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x10 4.--7. " BLEM9 ,ISO channel first TX/RX attempt default priority value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x10 0.--3. " BLEM8 ,ISO channel subsequent TX/RX attempt" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group.long 0x140++0x0F
|
|
line.long 0x00 "BB_RALPTR,Resolving Address List Engine Register"
|
|
hexmask.long.word 0x00 0.--15. 0x01 " RALPTR ,RAL structure start address pointer"
|
|
line.long 0x04 "BB_RALNBDEV,Resolving Address List Engine Register"
|
|
hexmask.long.byte 0x04 0.--7. 1. " RALNBDEV ,RAL structure number of devices"
|
|
line.long 0x08 "BB_RAL_LOCAL_RND,Resolving Address List Engine Register"
|
|
bitfld.long 0x08 31. " LRND_INIT ,Local RPA random number generation LFSR initialization" "Not initialized,Initialized"
|
|
hexmask.long.tbyte 0x08 0.--21. 1. " LRND_VAL ,Local RPA initialization/current value"
|
|
line.long 0x0C "BB_RAL_PEER_RND,Resolving Address List Engine Register"
|
|
bitfld.long 0x0C 31. " PRND_INIT ,Peer RPA random number generation LFSR initialization" "Not initialized,Initialized"
|
|
hexmask.long.tbyte 0x0C 0.--21. 1. " PRND_VAL ,Peer RPA initialization/current value"
|
|
group.long 0x150++0x1B
|
|
line.long 0x00 "BB_ISOCHANCNTL0,ISO Channel 0 Control Register"
|
|
bitfld.long 0x00 4. " RETXACKEN0 ,TX ACK generation" "Not generated,Generated"
|
|
bitfld.long 0x00 3. " SYNCGEN0 ,Audio SYN_P generation enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " ISOCHANEN0 ,ISO channel enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0.--1. " ISOTYPE0 ,ISO channel type" "Audio mode 0,?..."
|
|
line.long 0x04 "BB_ISOMUTECNTL0,ISO Channel 0 Mute Control Register"
|
|
bitfld.long 0x04 31. " TOGO0 ,Used buffer indicator" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x04 19. " MUTE_SINK0 ,HW mute control" "Not muted,Muted"
|
|
bitfld.long 0x04 18. " MUTE_SOURCE0 ,Mute source" "Source buffer,Null length packet"
|
|
newline
|
|
bitfld.long 0x04 17. " INVL0_1 ,ISO buffer 1 SW mute" "Not muted,Muted"
|
|
bitfld.long 0x04 16. " INVL0_0 ,ISO buffer 0 SW mute" "Not muted,Muted"
|
|
hexmask.long.byte 0x04 0.--7. 1. " MUTE_PATTERN0 ,ISO channel 0 mute pattern value used when HW muting is enabled"
|
|
line.long 0x08 "BB_ISOCURRENTTXPTR0,ISO Channel 0 Current TX Pointer Register"
|
|
hexmask.long.word 0x08 16.--31. 0x01 " ISO0TXPTR0 ,ISO channel 0 TX ISO buffer pointer 0"
|
|
hexmask.long.word 0x08 0.--15. 0x01 " ISO0TXPTR1 ,ISO channel 0 TX ISO buffer pointer 1"
|
|
line.long 0x0C "BB_ISOCURRENTRXPTR0,ISO Channel 0 Current RX Pointer Register"
|
|
hexmask.long.word 0x0C 16.--31. 0x01 " ISO0RXPTR0 ,ISO channel 0 RX ISO buffer pointer 0"
|
|
hexmask.long.word 0x0C 0.--15. 0x01 " ISO0RXPTR1 ,ISO channel 0 RX ISO buffer pointer 1"
|
|
line.long 0x10 "BB_ISOTRCNL0,ISO Channel 0 Payloads Register"
|
|
hexmask.long.byte 0x10 16.--23. 1. " ISO0RXLEN ,Negotiated maximum expected number of bytes for ISO channel 0 RX payloads"
|
|
hexmask.long.byte 0x10 0.--7. 1. " ISO0TXLEN ,Negotiated number of bytes for ISO channel 0 TX payloads"
|
|
line.long 0x14 "BB_ISOEVTCNTLOFFSETL0,ISO Channel 0 Mute Control Register"
|
|
line.long 0x18 "BB_ISOEVTCNTLOFFSETU0,ISO Channel 0 Mute Control Register"
|
|
hexmask.long.byte 0x18 0.--6. 0x01 " EVT_CNT_OFFSETU0 ,MSB part of EVT_CNT_OFFSET0[39:0] field"
|
|
group.long 0x170++0x1B
|
|
line.long 0x00 "BB_ISOCHANCNTL1,ISO Channel 1 Control Register"
|
|
bitfld.long 0x00 4. " RETXACKEN1 ,TX ACK generation" "Not generated,Generated"
|
|
bitfld.long 0x00 3. " SYNCGEN1 ,Audio SYN_P generation enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " ISOCHANEN1 ,ISO channel enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0.--1. " ISOTYPE1 ,ISO channel type" "Audio mode 0,?..."
|
|
line.long 0x04 "BB_ISOMUTECNTL1,ISO Channel 1 Mute Control Register"
|
|
bitfld.long 0x04 31. " TOGO1 ,Used buffer indicator" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x04 19. " MUTE_SINK1 ,HW mute control" "Not muted,Muted"
|
|
bitfld.long 0x04 18. " MUTE_SOURCE1 ,Mute source" "Source buffer,Null length packet"
|
|
newline
|
|
bitfld.long 0x04 17. " INVL1_1 ,ISO buffer 1 SW mute" "Not muted,Muted"
|
|
bitfld.long 0x04 16. " INVL1_0 ,ISO buffer 0 SW mute" "Not muted,Muted"
|
|
hexmask.long.byte 0x04 0.--7. 1. " MUTE_PATTERN1 ,ISO channel 1 mute pattern value used when HW muting is enabled"
|
|
line.long 0x08 "BB_ISOCURRENTTXPTR1,ISO Channel 1 Current TX Pointer Register"
|
|
hexmask.long.word 0x08 16.--31. 0x01 " ISO1TXPTR0 ,ISO channel 1 TX ISO buffer pointer 0"
|
|
hexmask.long.word 0x08 0.--15. 0x01 " ISO1TXPTR1 ,ISO channel 1 TX ISO buffer pointer 1"
|
|
line.long 0x0C "BB_ISOCURRENTRXPTR1,ISO Channel 1 Current RX Pointer Register"
|
|
hexmask.long.word 0x0C 16.--31. 0x01 " ISO1RXPTR0 ,ISO channel 1 RX ISO buffer pointer 0"
|
|
hexmask.long.word 0x0C 0.--15. 0x01 " ISO1RXPTR1 ,ISO channel 1 RX ISO buffer pointer 1"
|
|
line.long 0x10 "BB_ISOTRCNL1,ISO Channel 1 Payloads Register"
|
|
hexmask.long.byte 0x10 16.--23. 1. " ISO1RXLEN ,Negotiated maximum expected number of bytes for ISO channel 1 RX payloads"
|
|
hexmask.long.byte 0x10 0.--7. 1. " ISO1TXLEN ,Negotiated number of bytes for ISO channel 1 TX payloads"
|
|
line.long 0x14 "BB_ISOEVTCNTLOFFSETL1,ISO Channel 1 Mute Control Register"
|
|
line.long 0x18 "BB_ISOEVTCNTLOFFSETU1,ISO Channel 1 Mute Control Register"
|
|
hexmask.long.byte 0x18 0.--6. 0x01 " EVT_CNT_OFFSETU1 ,MSB part of EVT_CNT_OFFSET1[39:0] field"
|
|
group.long 0x190++0x1B
|
|
line.long 0x00 "BB_ISOCHANCNTL2,ISO Channel 2 Control Register"
|
|
bitfld.long 0x00 4. " RETXACKEN2 ,TX ACK generation" "Not generated,Generated"
|
|
bitfld.long 0x00 3. " SYNCGEN2 ,Audio SYN_P generation enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " ISOCHANEN2 ,ISO channel enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0.--1. " ISOTYPE2 ,ISO channel type" "Audio mode 0,?..."
|
|
line.long 0x04 "BB_ISOMUTECNTL2,ISO Channel 2 Mute Control Register"
|
|
bitfld.long 0x04 31. " TOGO2 ,Used buffer indicator" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x04 19. " MUTE_SINK2 ,HW mute control" "Not muted,Muted"
|
|
bitfld.long 0x04 18. " MUTE_SOURCE2 ,Mute source" "Source buffer,Null length packet"
|
|
newline
|
|
bitfld.long 0x04 17. " INVL2_1 ,ISO buffer 1 SW mute" "Not muted,Muted"
|
|
bitfld.long 0x04 16. " INVL2_0 ,ISO buffer 0 SW mute" "Not muted,Muted"
|
|
hexmask.long.byte 0x04 0.--7. 1. " MUTE_PATTERN2 ,ISO channel 2 mute pattern value used when HW muting is enabled"
|
|
line.long 0x08 "BB_ISOCURRENTTXPTR2,ISO Channel 2 Current TX Pointer Register"
|
|
hexmask.long.word 0x08 16.--31. 0x01 " ISO2TXPTR0 ,ISO channel 2 TX ISO buffer pointer 0"
|
|
hexmask.long.word 0x08 0.--15. 0x01 " ISO2TXPTR1 ,ISO channel 2 TX ISO buffer pointer 1"
|
|
line.long 0x0C "BB_ISOCURRENTRXPTR2,ISO Channel 2 Current RX Pointer Register"
|
|
hexmask.long.word 0x0C 16.--31. 0x01 " ISO2RXPTR0 ,ISO channel 2 RX ISO buffer pointer 0"
|
|
hexmask.long.word 0x0C 0.--15. 0x01 " ISO2RXPTR1 ,ISO channel 2 RX ISO buffer pointer 1"
|
|
line.long 0x10 "BB_ISOTRCNL2,ISO Channel 2 Payloads Register"
|
|
hexmask.long.byte 0x10 16.--23. 1. " ISO2RXLEN ,Negotiated maximum expected number of bytes for ISO channel 2 RX payloads"
|
|
hexmask.long.byte 0x10 0.--7. 1. " ISO2TXLEN ,Negotiated number of bytes for ISO channel 2 TX payloads"
|
|
line.long 0x14 "BB_ISOEVTCNTLOFFSETL2,ISO Channel 2 Mute Control Register"
|
|
line.long 0x18 "BB_ISOEVTCNTLOFFSETU2,ISO Channel 2 Mute Control Register"
|
|
hexmask.long.byte 0x18 0.--6. 0x01 " EVT_CNT_OFFSETU2 ,MSB part of EVT_CNT_OFFSET2[39:0] field"
|
|
group.long 0x1B0++0x03
|
|
line.long 0x00 "BB_BBPRIOSCHARB,Decision Instant For Priority Scheduling Arbitration Control Register"
|
|
bitfld.long 0x00 15. " BLEPRIOMODE ,Bluetooth low energy technology decision instant usage" "Not used,Used"
|
|
hexmask.long.byte 0x00 0.--7. 1. " BLEMARGIN ,Decision instant margin for priority scheduling arbitration"
|
|
tree.end
|
|
width 0x0B
|
|
tree.end
|
|
tree "DIO (Digital Input/Output)"
|
|
base ad:0x40000700
|
|
width 22.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration"
|
|
bitfld.long 0x00 12.--13. " DRIVE ,Drive strength configuration" "2x,3x,5x,6x"
|
|
bitfld.long 0x00 10. " LPF ,Low pass filter enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8.--9. " PULL_CTRL ,Pull selection" "No pull,Weak pull up,Weak pull down,Strong pull up"
|
|
bitfld.long 0x00 0.--5. " IO_MODE ,IO mode selection" "GPIO_IN_0,GPIO_IN_1,GPIO_OUT_0,GPIO_OUT_1,USRCLK,SLOWCLK,SYSCLK,PCM_SERO,PCM_FRAME,SPI0_SERO,SPI0_CS,SPI0_CLK,SPI1_SERO,SPI1_CS,SPI1_CLK,UART_TX,SCL,SDA,PWM0,PWM0_INV,PWM1,PWM1_INV,LPDSP32_TDO,RFCLK,RCCLK,JTCK_DIV,EXTCLK_DIV,STANDBYCLK,BB_TX_DATA,BB_TX_DATA_VALID,BB_SYNC_P,BB_AUDIO0_SYNC_P,BB_AUDIO1_SYNC_P,BB_AUDIO2_SYNC_P,BB_SPI_CSN,BB_SPI_CLK,BB_SPI_MOSI,BB_DBG0_0,BB_DBG0_1,BB_DBG0_2,BB_DBG0_3,BB_DBG0_4,BB_DBG0_5,BB_DBG0_6,BB_DBG0_7,RF_SPI_MISO,RF_GPIO0,RF_GPIO1,RF_GPIO2,RF_GPIO3,RF_GPIO4,RF_GPIO5,RF_GPIO6,RF_GPIO7,RF_GPIO8,RF_GPIO9,AUDIOCLK,AUDIOSLOWCLK,OD_P,OD_N,AUDIO_SYNC_PULSE,AUDIO_SYNC_MISSED,INPUT,DISABLE"
|
|
if (((per.l(ad:0x40000700))&(0x3F))<0x04)
|
|
wgroup.long 0x40++0x07
|
|
line.long 0x00 "DATA,Data Access Register"
|
|
hexmask.long.word 0x00 0.--15. 1. " GPIO ,GPIO write data"
|
|
line.long 0x04 "DIR,Direction State"
|
|
hexmask.long.word 0x00 0.--15. 1. " GPIO ,Set GPIO direction"
|
|
else
|
|
rgroup.long 0x40++0x07
|
|
line.long 0x00 "DATA,Data Access Register"
|
|
hexmask.long.word 0x00 0.--15. 1. " DIO ,DIO read data"
|
|
line.long 0x04 "DIR,Direction State"
|
|
hexmask.long.word 0x04 0.--15. 1. " DIO ,Get DIO direction"
|
|
endif
|
|
rgroup.long 0x48++0x03
|
|
line.long 0x00 "MODE,Mode State"
|
|
hexmask.long.word 0x00 0.--15. 1. " GPIO ,DIO mode"
|
|
group.long 0x4C++0x03
|
|
line.long 0x00 "INT_CFG,Interrupt Configuration"
|
|
bitfld.long 0x00 11. " DEBOUNCE_ENABLE ,Interrupt button debounce filter enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8.--10. " EVENT ,Interrupt event configuration" "None,High level,Low level,Rising edge,Falling edge,Transition,?..."
|
|
bitfld.long 0x00 0.--3. " SRC ,Interrupt input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15]"
|
|
group.long 0x5C++0x0B
|
|
line.long 0x00 "INT_DEBOUNCE,Interrupt Button Debounce Filter Time Configuration"
|
|
bitfld.long 0x00 8. " DEBOUNCE_CLK ,Interrupt button debounce filter clock" "SLOWCLK/32,SLOWCLK/1024"
|
|
hexmask.long.byte 0x00 0.--7. 1. " DEBOUNCE_COUNT ,Interrupt button debounce filter count"
|
|
line.long 0x04 "PCM_SRC,PCM Input Selection"
|
|
bitfld.long 0x04 16.--20. " SERI ,PCM_SERI input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x04 8.--12. " FRAME ,PCM_FRAME input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x04 0.--4. " CLK ,PCM_CLK input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
line.long 0x08 "SPI_SRC,SPI Interface Input Selection"
|
|
bitfld.long 0x08 16.--20. " SERI ,SPI_SERI input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x08 8.--12. " CS ,SPI_CS input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x08 0.--4. " CLK ,SPI_CLK input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
group.long 0x6C++0x3B
|
|
line.long 0x00 "UART_SRC,UART Interface Input Selection"
|
|
bitfld.long 0x00 0.--4. " RX ,UART_RX input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
line.long 0x04 "I2C_SRC,I2C Input Selection"
|
|
bitfld.long 0x04 8.--12. " SDA ,SDA input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x04 0.--4. " SCL ,SCL input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
line.long 0x08 "AUDIOSINK_SRC,Audio Sink Input Selection"
|
|
bitfld.long 0x08 0.--4. " CLK ,Audio sink clock input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,STANDBYCLK,?..."
|
|
line.long 0x0C "NMI_SRC,NMI Input Selection"
|
|
bitfld.long 0x0C 5. " NMI_POLARITY ,NMI polarity active" "Low,High"
|
|
bitfld.long 0x0C 0.--4. " NMI ,NMI input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
line.long 0x10 "BB_RX_SRC,Baseband Controller Rx Data And Clock Input Selection"
|
|
bitfld.long 0x10 16.--20. " RF_SYNC_P ,Baseband controller interface RF_SYNC_P input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,RF_SYNC_P,?..."
|
|
bitfld.long 0x10 8.--12. " CLK ,Baseband controller Rx clock input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,RX_CLK,?..."
|
|
bitfld.long 0x10 0.--4. " DATA ,Baseband controller Rx data input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,RX_DATA,?..."
|
|
line.long 0x14 "BB_SPI_SRC,Baseband Controller SPI Input Selection"
|
|
bitfld.long 0x14 0.--4. " MISO ,Baseband controller SPI_MISO input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,SPI_MISO,?..."
|
|
line.long 0x18 "RF_SPI_SRC,RF Front-End SPI Input Selection"
|
|
bitfld.long 0x18 16.--20. " MOSI ,RF front-end SPI_MOSI input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,SPI_MOSI,?..."
|
|
bitfld.long 0x18 8.--12. " CSN ,RF front-end SPI_CSN input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,SPI_CSN,?..."
|
|
bitfld.long 0x18 0.--4. " CLK ,RF front-end SPI_CLK input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,SPI_CLK,?..."
|
|
line.long 0x1C "RF_GPIO03_SRC,RF Front-End GPIOs 0-3 Input Selection"
|
|
bitfld.long 0x1C 24.--28. " GPIO3 ,RF front-end GPIO3 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,TX_DATA,?..."
|
|
bitfld.long 0x1C 16.--20. " GPIO2 ,RF front-end GPIO2 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,SYNC_P,?..."
|
|
bitfld.long 0x1C 8.--12. " GPIO1 ,RF front-end GPIO1 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x1C 0.--4. " GPIO0 ,RF front-end GPIO0 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
line.long 0x20 "RF_GPIO47_SRC,RF Front-End GPIOs 4-7 Input Selection"
|
|
bitfld.long 0x20 24.--28. " GPIO7 ,RF front-end GPIO7 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x20 16.--20. " GPIO6 ,RF front-end GPIO6 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x20 8.--12. " GPIO5 ,RF front-end GPIO5 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x20 0.--4. " GPIO4 ,RF front-end GPIO4 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,TX_DATA_VALID,?..."
|
|
line.long 0x24 "RF_GPIO89_SRC,RF Front-End GPIOs 8-9 Input Selection"
|
|
bitfld.long 0x24 8.--12. " GPIO9 ,RF front-end GPIO9 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x24 0.--4. " GPIO8 ,RF front-end GPIO8 input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
line.long 0x28 "DIO_DMIC_SRC,DMIC Data Input Selection Register"
|
|
bitfld.long 0x28 8.--12. " CLK ,DMIC clock input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x28 0.--4. " DATA ,DMIC data input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
line.long 0x2C "DIO_LPDSP32_JTAG_SRC,LPDSP32 JTAG Configuration Register"
|
|
bitfld.long 0x2C 16.--20. " TDI ,LPDSP32_TDI input selection""DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x2C 8.--12. " TMS ,LPDSP32_TMS input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
bitfld.long 0x2C 0.--4. " TCK ,LPDSP32_TCK input selection" "DIO[0],DIO[1],DIO[2],DIO[3],DIO[4],DIO[5],DIO[6],DIO[7],DIO[8],DIO[9],DIO[10],DIO[11],DIO[12],DIO[13],DIO[14],DIO[15],Constant low,Constant high,?..."
|
|
line.long 0x30 "DIO_JTAG_SW_PAD_CFG,JTAG / SW Pad Configuration Register"
|
|
bitfld.long 0x30 9. " JTCK_LPF ,JTCK low-pass-filter enable" "Disabled,Enabled"
|
|
bitfld.long 0x30 8. " JTMS_LPF ,JTMS low-pass-filter enable" "Disabled,Enabled"
|
|
bitfld.long 0x30 7. " CM3_JTAG_DATA_EN ,CM3 JTAG on DIO[14:15]" "Not available,Available"
|
|
bitfld.long 0x30 6. " CM3_JTAG_TRST_EN ,CM3 JTAG TRST on DIO[13]" "Not available,Available"
|
|
newline
|
|
bitfld.long 0x30 4.--5. " JTCK_PULL ,JTCK pull selection" "Disabled,Weak pull-up,Weak pull-down,Strong pull-up"
|
|
bitfld.long 0x30 2.--3. " JTMS_DRIVE ,JTMS drive strength" "x2,x3,x5,x6"
|
|
bitfld.long 0x30 0.--1. " JTMS_PULL ,JTMS pull selection" "Disabled,Weak pull-up,Weak pull-down,Strong pull-up"
|
|
line.long 0x34 "DIO_EXTCLK_CFG,External Clock Pad Configuration Register"
|
|
bitfld.long 0x34 2. " LPF ,Low pass filter enable" "Disabled,Enabled"
|
|
bitfld.long 0x34 0.--1. " PULL_CTRL ,Pull selection" "Disabled,Weak pull-up,Weak pull-down,Strong pull-up"
|
|
line.long 0x38 "DIO_PAD_CFG,Global Pads Configuration Register"
|
|
bitfld.long 0x38 0. " DRIVE ,Drive strength configuration for all pads" "Regular,Increased by 50%"
|
|
width 0x0B
|
|
tree.end
|
|
tree.open "EDI (External Digital Interfaces)"
|
|
tree "ADC (Analog-To-Digital Converter)"
|
|
base ad:0x40001200
|
|
width 50.
|
|
rgroup.long 0x0++0x03
|
|
line.long 0x00 "ADC_DATA_TRIM_CH0,ADC Conversion Result For Channel 0 In Trimmer Mode"
|
|
hexmask.long.word 0x00 0.--13. 1. " DATA ,14-bit ADC conversion result"
|
|
rgroup.long 0x4++0x03
|
|
line.long 0x00 "ADC_DATA_TRIM_CH1,ADC Conversion Result For Channel 1 In Trimmer Mode"
|
|
hexmask.long.word 0x00 0.--13. 1. " DATA ,14-bit ADC conversion result"
|
|
rgroup.long 0x8++0x03
|
|
line.long 0x00 "ADC_DATA_TRIM_CH2,ADC Conversion Result For Channel 2 In Trimmer Mode"
|
|
hexmask.long.word 0x00 0.--13. 1. " DATA ,14-bit ADC conversion result"
|
|
rgroup.long 0xC++0x03
|
|
line.long 0x00 "ADC_DATA_TRIM_CH3,ADC Conversion Result For Channel 3 In Trimmer Mode"
|
|
hexmask.long.word 0x00 0.--13. 1. " DATA ,14-bit ADC conversion result"
|
|
rgroup.long 0x10++0x03
|
|
line.long 0x00 "ADC_DATA_TRIM_CH4,ADC Conversion Result For Channel 4 In Trimmer Mode"
|
|
hexmask.long.word 0x00 0.--13. 1. " DATA ,14-bit ADC conversion result"
|
|
rgroup.long 0x14++0x03
|
|
line.long 0x00 "ADC_DATA_TRIM_CH5,ADC Conversion Result For Channel 5 In Trimmer Mode"
|
|
hexmask.long.word 0x00 0.--13. 1. " DATA ,14-bit ADC conversion result"
|
|
rgroup.long 0x18++0x03
|
|
line.long 0x00 "ADC_DATA_TRIM_CH6,ADC Conversion Result For Channel 6 In Trimmer Mode"
|
|
hexmask.long.word 0x00 0.--13. 1. " DATA ,14-bit ADC conversion result"
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "ADC_DATA_TRIM_CH7,ADC Conversion Result For Channel 7 In Trimmer Mode"
|
|
hexmask.long.word 0x00 0.--13. 1. " DATA ,14-bit ADC conversion result"
|
|
rgroup.long 0x20++0x03
|
|
line.long 0x00 "ADC_DATA_AUDIO_CH0,ADC Conversion Result For Channel 0 In Audio Mode"
|
|
rgroup.long 0x24++0x03
|
|
line.long 0x00 "ADC_DATA_AUDIO_CH1,ADC Conversion Result For Channel 1 In Audio Mode"
|
|
rgroup.long 0x28++0x03
|
|
line.long 0x00 "ADC_DATA_AUDIO_CH2,ADC Conversion Result For Channel 2 In Audio Mode"
|
|
rgroup.long 0x2C++0x03
|
|
line.long 0x00 "ADC_DATA_AUDIO_CH3,ADC Conversion Result For Channel 3 In Audio Mode"
|
|
rgroup.long 0x30++0x03
|
|
line.long 0x00 "ADC_DATA_AUDIO_CH4,ADC Conversion Result For Channel 4 In Audio Mode"
|
|
rgroup.long 0x34++0x03
|
|
line.long 0x00 "ADC_DATA_AUDIO_CH5,ADC Conversion Result For Channel 5 In Audio Mode"
|
|
rgroup.long 0x38++0x03
|
|
line.long 0x00 "ADC_DATA_AUDIO_CH6,ADC Conversion Result For Channel 6 In Audio Mode"
|
|
rgroup.long 0x3C++0x03
|
|
line.long 0x00 "ADC_DATA_AUDIO_CH7,ADC Conversion Result For Channel 7 In Audio Mode"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "ADC_INPUT_SEL0,ADC Input Selection For Channel 0"
|
|
bitfld.long 0x00 4.--6. " POS_INPUT_SEL ,Positive input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
bitfld.long 0x00 0.--2. " NEG_INPUT_SEL ,Negative input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
group.long 0x44++0x03
|
|
line.long 0x00 "ADC_INPUT_SEL1,ADC Input Selection For Channel 1"
|
|
bitfld.long 0x00 4.--6. " POS_INPUT_SEL ,Positive input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
bitfld.long 0x00 0.--2. " NEG_INPUT_SEL ,Negative input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
group.long 0x48++0x03
|
|
line.long 0x00 "ADC_INPUT_SEL2,ADC Input Selection For Channel 2"
|
|
bitfld.long 0x00 4.--6. " POS_INPUT_SEL ,Positive input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
bitfld.long 0x00 0.--2. " NEG_INPUT_SEL ,Negative input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
group.long 0x4C++0x03
|
|
line.long 0x00 "ADC_INPUT_SEL3,ADC Input Selection For Channel 3"
|
|
bitfld.long 0x00 4.--6. " POS_INPUT_SEL ,Positive input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
bitfld.long 0x00 0.--2. " NEG_INPUT_SEL ,Negative input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
group.long 0x50++0x03
|
|
line.long 0x00 "ADC_INPUT_SEL4,ADC Input Selection For Channel 4"
|
|
bitfld.long 0x00 4.--6. " POS_INPUT_SEL ,Positive input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
bitfld.long 0x00 0.--2. " NEG_INPUT_SEL ,Negative input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
group.long 0x54++0x03
|
|
line.long 0x00 "ADC_INPUT_SEL5,ADC Input Selection For Channel 5"
|
|
bitfld.long 0x00 4.--6. " POS_INPUT_SEL ,Positive input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
bitfld.long 0x00 0.--2. " NEG_INPUT_SEL ,Negative input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
group.long 0x58++0x03
|
|
line.long 0x00 "ADC_INPUT_SEL6,ADC Input Selection For Channel 6"
|
|
bitfld.long 0x00 4.--6. " POS_INPUT_SEL ,Positive input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
bitfld.long 0x00 0.--2. " NEG_INPUT_SEL ,Negative input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
group.long 0x5C++0x03
|
|
line.long 0x00 "ADC_INPUT_SEL7,ADC Input Selection For Channel 7"
|
|
bitfld.long 0x00 4.--6. " POS_INPUT_SEL ,Positive input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
bitfld.long 0x00 0.--2. " NEG_INPUT_SEL ,Negative input selection" "DIO0,DIO1,DIO2,DIO3,AOUT,VDDC,VBAT/2,ADC int gnd"
|
|
group.long 0x60++0x07
|
|
line.long 0x00 "ADC_CFG,ADC Configuration Register"
|
|
bitfld.long 0x00 5. " DUTY_DIVIDER ,Duty cycling VDD divider enable mode" "Always,Only during conversion"
|
|
bitfld.long 0x00 4. " CONTINUOUS_MODE ,ADC interrupt source channel continuous sampling mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FREQ ,ADC channels sampling frequency" "Disabled,SLOWCLK/200 (LFM),SLOWCLK/400 (LFM),SLOWCLK/640 (LFM),SLOWCLK/800 (LFM),SLOWCLK/1600 (LFM),SLOWCLK/3200 (LFM),SLOWCLK/6400 (LFM),SLOWCLK/20 (HFM),SLOWCLK/40 (HFM),SLOWCLK/80 (HFM),SLOWCLK/128 (HFM),SLOWCLK/160 (HFM),SLOWCLK/320 (HFM),SLOWCLK/640 (HFM),SLOWCLK/1280 (HFM)"
|
|
line.long 0x04 "ADC_OFFSET,ADC Conversion Result For ADC GND"
|
|
hexmask.long.word 0x04 0.--14. 1. " DATA ,15-bit ADC data signed offset"
|
|
group.long 0x70++0x07
|
|
line.long 0x00 "ADC_BATMON_CFG,Battery Monitoring Configuration Register"
|
|
hexmask.long.byte 0x00 16.--23. 1. " ALARM_COUNT_VALUE ,Alarm count value"
|
|
hexmask.long.byte 0x00 8.--15. 1. " SUPPLY_THRESHOLD ,Low voltage detection threshold"
|
|
bitfld.long 0x00 0. " SUPPLY_SRC ,Monitored power supply voltage source selection" "Channel 6,Channel 7"
|
|
line.long 0x04 "ADC_BATMON_INT_ENABLE,ADC / BATMON Interrupt Mask Register"
|
|
bitfld.long 0x04 4. " BATMON_ALARM_INT_ENABLE ,BATMON alarm interrupt mask" "Masked,Not masked"
|
|
bitfld.long 0x04 1.--3. " ADC_INT_CH_NUM ,Channel number triggering the ADC interrupt" "ADC_DATA_CH0,ADC_DATA_CH1,ADC_DATA_CH2,ADC_DATA_CH3,ADC_DATA_CH4,ADC_DATA_CH5,ADC_DATA_CH6,ADC_DATA_CH7"
|
|
bitfld.long 0x04 0. " ADC_INT_ENABLE ,ADC new sample ready interrupt mask" "Masked,Not masked"
|
|
rgroup.long 0x78++0x03
|
|
line.long 0x00 "ADC_BATMON_COUNT_VAL,Battery Monitoring Status Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " SUPPLY_COUNT_VALUE ,Number of times the battery voltage has fallen below the battery monitor voltage threshold"
|
|
group.long 0x7C++0x03
|
|
line.long 0x00 "ADC_BATMON_STATUS,ADC / BATMON Status Register"
|
|
bitfld.long 0x00 12. " BATMON_ALARM_CLEAR ,Battery monitoring alarm status clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 9. " ADC_OVERRUN_CLEAR ,ADC overrun condition clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 8. " ADC_READY_CLEAR ,ADC new sample ready status clear" "Not cleared,Cleared"
|
|
newline
|
|
rbitfld.long 0x00 4. " BATMON_ALARM_STAT ,Battery monitoring alarm status" "Not triggered,Triggered"
|
|
rbitfld.long 0x00 1. " ADC_OVERRUN_STAT ,ADC overrun condition" "No detected,Detected"
|
|
rbitfld.long 0x00 0. " ADC_READY_STAT ,ADC new sample ready status" "Not ready,Ready"
|
|
width 0x0B
|
|
tree.end
|
|
tree "I2C (Inter-Integrated Circuit)"
|
|
base ad:0x40000B00
|
|
width 12.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Interface Configuration And Control"
|
|
hexmask.long.byte 0x00 16.--23. 1. " SPEED ,Number of SYSCLK cycles"
|
|
hexmask.long.byte 0x00 8.--14. 0x01 " SLAVE_ADDRESS ,Slave address"
|
|
bitfld.long 0x00 4. " CONTROLLER ,Controller" "CM3,DMA"
|
|
bitfld.long 0x00 3. " STOP_INT_ENABLE ,Stop interrupts enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " AUTO_ACK_ENABLE ,Acknowledgment automatically generating enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 1. " I2C_SAMLE_CLK_ENABLE ,I2C sample clock enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " SLAVE_ENABLE ,I2C interface for slave mode enable" "Disabled,Enabled"
|
|
wgroup.long 0x04++0x03
|
|
line.long 0x00 "CTRL1,Interface Status And Control"
|
|
bitfld.long 0x00 5. " RESET ,Reset the I2C interface" "No reset,Reset"
|
|
bitfld.long 0x00 4. " LAST_DATA ,Last byte of data transfer" "Not last,Last"
|
|
bitfld.long 0x00 3. " STOP ,Stop condition issued" "Not stopped,Stopped"
|
|
bitfld.long 0x00 1. " NACK ,Not acknowledge issued" "Not issued,Issued"
|
|
bitfld.long 0x00 0. " ACK ,Acknowledge issued" "Not issued,Issued"
|
|
group.long 0x08++0x07
|
|
line.long 0x00 "DATA,Interface Data"
|
|
hexmask.long.byte 0x00 0.--7. 0x01 " I2C_DATA ,Single byte buffer"
|
|
line.long 0x04 "DATA_M,Interface Data Mirror"
|
|
hexmask.long.byte 0x04 0.--7. 0x01 " I2C_DATA_M ,Single byte buffer mirror"
|
|
wgroup.long 0x10++0x03
|
|
line.long 0x00 "ADDR_START,Master Address And Start"
|
|
hexmask.long.byte 0x00 1.--7. 0x02 " ADDRESS ,I2C transaction address"
|
|
bitfld.long 0x00 0. " READ_WRITE ,Started transaction" "Write,Read"
|
|
rgroup.long 0x14++0x03
|
|
line.long 0x00 "STATUS,Status"
|
|
eventfld.long 0x00 15. " ERROR_S ,Error" "No error,Error"
|
|
eventfld.long 0x00 14. " BUS_ERROR_S ,Bus error" "No error,Error"
|
|
bitfld.long 0x00 13. " START_PENDING ,Master frame start pending" "Not pending,Pending"
|
|
bitfld.long 0x00 12. " MASTER_MODE ,Master mode" "Inactive,Active"
|
|
eventfld.long 0x00 11. " DMA_REQ ,DMA data is currently requested by interface" "Not requested,Requested"
|
|
newline
|
|
eventfld.long 0x00 10. " STOP_DETECT ,Stop bit detected" "Not detected,Detected"
|
|
eventfld.long 0x00 9. " DATA_EVENT ,Interface data event" "No event,Event"
|
|
eventfld.long 0x00 8. " ERROR ,Any error detected" "No error,Error"
|
|
eventfld.long 0x00 7. " BUS_ERROR ,Bus error detected" "No error,Error"
|
|
bitfld.long 0x00 6. " BUFFER_FULL ,Data buffer full" "Empty,Full"
|
|
newline
|
|
bitfld.long 0x00 5. " CLK_STRETCH ,Clock signal holding" "Not stretched,Stretched"
|
|
bitfld.long 0x00 4. " BUS_FREE ,Interface bus free" "Free,Busy"
|
|
bitfld.long 0x00 3. " ADDR_DATA ,Address or data byte holding" "Data,Address"
|
|
bitfld.long 0x00 2. " READ_WRITE ,Bus transfer mode" "Write,Read"
|
|
bitfld.long 0x00 1. " GEN_CALL ,General call address used" "Other,General call"
|
|
newline
|
|
bitfld.long 0x00 0. " ACK_STATUS ,Not acknowledge received" "Acknowledged,Not acknowledged"
|
|
width 0x0B
|
|
tree.end
|
|
tree "PCM (Pulse Code Modulation)"
|
|
base ad:0x40000A00
|
|
width 9.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "CTRL,Control"
|
|
bitfld.long 0x00 14. " PCM_CLK_POL ,PCM clock polarity" "Falling,Rising"
|
|
bitfld.long 0x00 12. " BIT_ORDER ,Transmitted data with MSB or LSB" "MSB,LSB"
|
|
bitfld.long 0x00 11. " TX_ALIGN ,Bits used for transmitting data" "MSB,LSB"
|
|
bitfld.long 0x00 9.--10. " WORD_SIZE ,PCM word bits number" "8,16,24,32"
|
|
bitfld.long 0x00 8. " FRAME_ALIGN ,PCM frame signal align bit" "Last,First"
|
|
newline
|
|
bitfld.long 0x00 7. " FRAME_WIDTH ,PCM frame signal used" "Short,Long"
|
|
bitfld.long 0x00 4.--6. " FRAME_LENGTH ,PCM frame words number" "2,4,6,8,10,12,14,16"
|
|
bitfld.long 0x00 3. " FRAME_SUBFRAMES ,Frame signal for every frame or word" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " CONTROLLER ,PCM data transfers controller" "Arm Cortex-M3,DMA"
|
|
bitfld.long 0x00 1. " ENABLE ,PCM interface enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " SLAVE ,PCM interface mode" "Master,Slave"
|
|
line.long 0x04 "TX_DATA,Transmit Data"
|
|
rgroup.long 0x08++0x03
|
|
line.long 0x00 "RX_DATA,Receive Data"
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "STATUS,Status"
|
|
eventfld.long 0x00 3. " TRANSMIT_STATUS ,PCM data sent" "Not occurred,Occurred"
|
|
eventfld.long 0x00 2. " RECEIVE_STATUS ,PCM data received" "Not occurred,Occurred"
|
|
eventfld.long 0x00 1. " OVERRUN_STATUS ,Overrun occurred" "Not occurred,Occurred"
|
|
eventfld.long 0x00 0. " UNDERRUN_STATUS ,Underrun occurred" "Not occurred,Occurred"
|
|
width 0x0B
|
|
tree.end
|
|
tree "PWM (Pulse Width Modulation)"
|
|
base ad:0x40000D00
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register"
|
|
hexmask.long.byte 0x00 8.--15. 1. " PWM_HIGH ,PWM high duty cycle"
|
|
hexmask.long.byte 0x00 0.--7. 1. " PWM_PERIOD ,PWM period"
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "CTRL,Control Register"
|
|
bitfld.long 0x00 16. " PWM_OFFSET_ENABLE ,PWM offset enable" "Disabled,Enabled"
|
|
hexmask.long.byte 0x00 8.--15. 0x01 " PWM_OFFSET ,PWM0 to PWM1 offset"
|
|
bitfld.long 0x00 4. " PWM1_ENABLE ,PWM1 block enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PWM0_ENABLE ,PWM0 block enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree.open "SPI (Serial Peripheral Interfaces)"
|
|
tree "SPI0"
|
|
base ad:0x40000800
|
|
width 9.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Control And Configuration Register"
|
|
bitfld.long 0x00 10. " OVERRUN_INT_ENABLE ,SPI overrun interrupts enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " UNDERRUN_INT_ENABLE ,SPI underrun interrupts enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " CONTROLLER ,PCM data transfers controller" "Arm Cortex-M3,DMA"
|
|
bitfld.long 0x00 7. " SLAVE ,SPI interface mode" "Master,Slave"
|
|
newline
|
|
bitfld.long 0x00 6. " CLK_POLARITY ,SPI clock polarity" "Normal,Inverse"
|
|
bitfld.long 0x00 5. " MODE_SELECT ,SPI master transaction mode" "Manual,Auto"
|
|
bitfld.long 0x00 4. " ENABLE ,SPI interface enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " PRESCALE ,SPI interface clock prescale" "2,4,8,16,32,64,128,256,512,1024,?..."
|
|
if ((per.l(ad:0x40000800)&0x80)==0x00)
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "CTRL1,Transaction Control Register"
|
|
bitfld.long 0x00 8. " START_BUSY ,SPI data transfer start" "Idle,Start"
|
|
bitfld.long 0x00 6.--7. " RW_CMD ,Command issued to the SPI interface" "No operation,Write,Read,Read/Write"
|
|
bitfld.long 0x00 5. " CS ,SPI chip select line set" "Low,High"
|
|
bitfld.long 0x00 0.--4. " WORD_SIZE ,Word size select [bits]" "1,,,,,,,8,,,,,,,,16,,,,,,,,24,,,,,,,,32"
|
|
else
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "CTRL1,Transaction Control Register"
|
|
rbitfld.long 0x00 8. " BUSY_STATUS ,SPI data transfer status" "Idle,Busy"
|
|
bitfld.long 0x00 6.--7. " RW_CMD ,Command issued to the SPI interface" "No operation,Write,Read,Read/Write"
|
|
bitfld.long 0x00 5. " CS ,SPI chip select line read" "Low,High"
|
|
bitfld.long 0x00 0.--4. " WORD_SIZE ,Word size select [bits]" "1,,,,,,,8,,,,,,,,16,,,,,,,,24,,,,,,,,32"
|
|
endif
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "TX_DATA,Transmit Data"
|
|
rgroup.long 0x0C++0x03
|
|
line.long 0x00 "RX_DATA,Received Data"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "STATUS,Status"
|
|
eventfld.long 0x00 3. " TRANSMIT_STATUS ,Data transmission completed" "Not occurred,Occurred"
|
|
eventfld.long 0x00 2. " RECEIVE_STATUS ,New data received" "Not occurred,Occurred"
|
|
eventfld.long 0x00 1. " OVERRUN_STATUS ,Overrun occurred by receiving data" "Not occurred,Occurred"
|
|
eventfld.long 0x00 0. " UNDERRUN_STATUS ,Underrun occurred by transmitting data" "Not occurred,Occurred"
|
|
width 0x0B
|
|
tree.end
|
|
tree "SPI1"
|
|
base ad:0x40000900
|
|
width 9.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Control And Configuration Register"
|
|
bitfld.long 0x00 10. " OVERRUN_INT_ENABLE ,SPI overrun interrupts enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " UNDERRUN_INT_ENABLE ,SPI underrun interrupts enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " CONTROLLER ,PCM data transfers controller" "Arm Cortex-M3,DMA"
|
|
bitfld.long 0x00 7. " SLAVE ,SPI interface mode" "Master,Slave"
|
|
newline
|
|
bitfld.long 0x00 6. " CLK_POLARITY ,SPI clock polarity" "Normal,Inverse"
|
|
bitfld.long 0x00 5. " MODE_SELECT ,SPI master transaction mode" "Manual,Auto"
|
|
bitfld.long 0x00 4. " ENABLE ,SPI interface enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " PRESCALE ,SPI interface clock prescale" "2,4,8,16,32,64,128,256,512,1024,?..."
|
|
if ((per.l(ad:0x40000900)&0x80)==0x00)
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "CTRL1,Transaction Control Register"
|
|
bitfld.long 0x00 8. " START_BUSY ,SPI data transfer start" "Idle,Start"
|
|
bitfld.long 0x00 6.--7. " RW_CMD ,Command issued to the SPI interface" "No operation,Write,Read,Read/Write"
|
|
bitfld.long 0x00 5. " CS ,SPI chip select line set" "Low,High"
|
|
bitfld.long 0x00 0.--4. " WORD_SIZE ,Word size select [bits]" "1,,,,,,,8,,,,,,,,16,,,,,,,,24,,,,,,,,32"
|
|
else
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "CTRL1,Transaction Control Register"
|
|
rbitfld.long 0x00 8. " BUSY_STATUS ,SPI data transfer status" "Idle,Busy"
|
|
bitfld.long 0x00 6.--7. " RW_CMD ,Command issued to the SPI interface" "No operation,Write,Read,Read/Write"
|
|
bitfld.long 0x00 5. " CS ,SPI chip select line read" "Low,High"
|
|
bitfld.long 0x00 0.--4. " WORD_SIZE ,Word size select [bits]" "1,,,,,,,8,,,,,,,,16,,,,,,,,24,,,,,,,,32"
|
|
endif
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "TX_DATA,Transmit Data"
|
|
rgroup.long 0x0C++0x03
|
|
line.long 0x00 "RX_DATA,Received Data"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "STATUS,Status"
|
|
eventfld.long 0x00 3. " TRANSMIT_STATUS ,Data transmission completed" "Not occurred,Occurred"
|
|
eventfld.long 0x00 2. " RECEIVE_STATUS ,New data received" "Not occurred,Occurred"
|
|
eventfld.long 0x00 1. " OVERRUN_STATUS ,Overrun occurred by receiving data" "Not occurred,Occurred"
|
|
eventfld.long 0x00 0. " UNDERRUN_STATUS ,Underrun occurred by transmitting data" "Not occurred,Occurred"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "UART (Universal Asynchronous Receiver-Transmitter Interfaces)"
|
|
base ad:0x40000C00
|
|
width 9.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "CFG,Configuration Register"
|
|
hexmask.long.word 0x00 8.--23. 1. " PRESCALE ,Prescaling multiplier in baud rate calculation"
|
|
bitfld.long 0x00 4. " PRESCALE_ENABLE ,Fixed prescaler by 12 enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " DMA_ENABLE ,DMA mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " ENABLE ,UART interface enable" "Disabled,Enabled"
|
|
line.long 0x04 "TX_DATA,Transmit Data Register"
|
|
hexmask.long.byte 0x04 0.--7. 1. " UART_TX_DATA ,UART transmit data"
|
|
rgroup.long 0x08++0x03
|
|
line.long 0x00 "RX_DATA,Receive Data Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " UART_RX_DATA ,UART received data"
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "STATUS,Status Register"
|
|
eventfld.long 0x00 0. " UART_RX_OVERRUN_STATUS ,Overrun occurred by receiving data" "Not occurred,Occurred"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree.open "PERIPH (Peripherals)"
|
|
tree "CRC (Cyclic Redundancy Check Generator)"
|
|
base ad:0x40000F00
|
|
width 8.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "CTRL,Generator Control"
|
|
bitfld.long 0x00 4. " FINAL_CRC_XOR ,CRC XOR mode" "Standard,Non standard"
|
|
bitfld.long 0x00 3. " FINAL_CRC_REVERSE ,CRC reversal mode" "Standard,Non standard"
|
|
bitfld.long 0x00 2. " BIT_ORDER ,Bytes added to the CRC bit order" "Standard,Non standard"
|
|
bitfld.long 0x00 1. " CRC_TYPE ,CRC type" "CCITT,32"
|
|
bitfld.long 0x00 0. " BYTE_ORDER ,Bytes added to the CRC endianness" "Big endian,Little endian"
|
|
line.long 0x04 "VALUE,Generator Current Value"
|
|
wgroup.long 0x08++0x13
|
|
line.long 0x00 "ADD_1,Generator - Add 1 Bit"
|
|
bitfld.long 0x00 0. " CRC_ADD_1_BIT ,Add 1 bit to CRC calculation" "No effect,Add"
|
|
line.long 0x04 "ADD_8,Generator - Add 1 Byte"
|
|
hexmask.long.byte 0x04 0.--7. 1. " CRC_ADD_8 ,Add 1 byte to CRC calculation"
|
|
line.long 0x08 "ADD_16,Generator - Add 1 Half-Word"
|
|
hexmask.long.word 0x08 0.--15. 1. " CRC_ADD_16 ,Add 1 half-word to CRC calculation"
|
|
line.long 0x0C "ADD_24,Generator - Add 3 Bytes"
|
|
hexmask.long.tbyte 0x0C 0.--23. 1. " CRC_ADD_24_BITS ,Add 3 bytes to CRC calculation"
|
|
line.long 0x10 "ADD_32,Generator - Add 1 Word"
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "FINAL,Generator Final Value"
|
|
width 0x0B
|
|
tree.end
|
|
tree.open "DMA (Direct Memory Access)"
|
|
tree "Channel 0"
|
|
base ad:0x40000600
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Channel 0 Control And Configuration"
|
|
bitfld.long 0x00 30.--31. " DEST_ADDR_STEP_SIZE ,Destination address step size" "1,2,3,4"
|
|
bitfld.long 0x00 28.--29. " SRC_ADDR_STEP_SIZE ,Source address step size" "1,2,3,4"
|
|
bitfld.long 0x00 27. " DEST_ADDR_STEP_MODE ,Destination address configuration" "Increment,Decrement"
|
|
newline
|
|
bitfld.long 0x00 26. " SRC_ADDR_STEP_MODE ,Source address configuration" "Increment,Decrement"
|
|
bitfld.long 0x00 25. " BYTE_ORDER ,Byte ordering" "Little endian,Big endian"
|
|
bitfld.long 0x00 24. " DISABLE_INT_ENABLE ,DMA channel disabled interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 23. " ERROR_INT_ENABLE ,State machine error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " COMPLETE_INT_ENABLE ,DMA transfer completed interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " COUNTER_INT_ENABLE ,DMA transfer reached counter value interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 20. " START_INT_ENABLE ,DMA transfer started interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 18.--19. " DEST_WORD_SIZE ,Destination word size" "8,16,32,4"
|
|
bitfld.long 0x00 16.--17. " SRC_WORD_SIZE ,Source word size" "8,16,32,4"
|
|
newline
|
|
bitfld.long 0x00 12.--14. " DEST_SELECT ,Request line for destination" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,OD"
|
|
bitfld.long 0x00 9.--11. " SRC_SELECT ,Request line for source" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,DMIC"
|
|
bitfld.long 0x00 6.--7. " CHANNEL_PRIORITY ,Channel priority level" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " TRANSFER_TYPE ,Transfer type" "Memory-to-memory,Memory-to-peripheral,Peripheral-to-memory,Peripheral-to-peripheral"
|
|
bitfld.long 0x00 3. " DEST_ADDR_INC ,Destination address increment" "Not incremented,Incremented"
|
|
bitfld.long 0x00 2. " SRC_ADDR_INC ,Source address increment" "Not incremented,Incremented"
|
|
newline
|
|
bitfld.long 0x00 1. " ADDR_MODE ,Addressing mode" "Circular,Linear"
|
|
bitfld.long 0x00 0. " ENABLE ,Channel enable" "Disabled,Enabled"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SRC_BASE_ADDR,Channel 0 Source Base Address"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DEST_BASE_ADDR,Channel 0 Destination Base Address"
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "CTRL1,Channel 0 Transfer Control"
|
|
hexmask.long.word 0x00 16.--31. 1. " COUNTER_INT_VALUE ,Counter interrupt value"
|
|
hexmask.long.word 0x00 0.--15. 1. " TRANSFER_LENGTH ,Data transfer length"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "NEXT_SRC_ADDR,Channel 0 Next Source Address"
|
|
rgroup.long 0xA0++0x03
|
|
line.long 0x00 "NEXT_DEST_ADDR,Channel 0 Next Destination Address"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "WORD_CNT,Channel 0 Word Count"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMA_WORD_CNT ,Number of words"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "STATUS,Status Channel 0"
|
|
rbitfld.long 0x00 5.--7. " STATE ,Channel state" "IDLE,CHK_SRC_DST,WAIT_SRC_RDY,WAIT_RD_COMP,CHK_DST,DIS_CH,WAIT_DST_RDY,WAIT_WR_COMP"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x00 12. " ERROR_INT_SET/CLR ,State machine error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x00 11. " COMPLETE_INT_SET/CLR ,Complete interrupt" "No interrupt,Interrupt"
|
|
newline
|
|
setclrfld.long 0x00 2. 0x00 2. 0x00 10. " COUNTER_INT_SET/CLR ,Counter interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x00 1. 0x00 9. " START_INT_SET/CLR ,Start interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x00 8. " DISABLE_INT_SET/CLR ,Channel disable interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Channel 1"
|
|
base ad:0x40000604
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Channel 1 Control And Configuration"
|
|
bitfld.long 0x00 30.--31. " DEST_ADDR_STEP_SIZE ,Destination address step size" "1,2,3,4"
|
|
bitfld.long 0x00 28.--29. " SRC_ADDR_STEP_SIZE ,Source address step size" "1,2,3,4"
|
|
bitfld.long 0x00 27. " DEST_ADDR_STEP_MODE ,Destination address configuration" "Increment,Decrement"
|
|
newline
|
|
bitfld.long 0x00 26. " SRC_ADDR_STEP_MODE ,Source address configuration" "Increment,Decrement"
|
|
bitfld.long 0x00 25. " BYTE_ORDER ,Byte ordering" "Little endian,Big endian"
|
|
bitfld.long 0x00 24. " DISABLE_INT_ENABLE ,DMA channel disabled interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 23. " ERROR_INT_ENABLE ,State machine error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " COMPLETE_INT_ENABLE ,DMA transfer completed interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " COUNTER_INT_ENABLE ,DMA transfer reached counter value interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 20. " START_INT_ENABLE ,DMA transfer started interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 18.--19. " DEST_WORD_SIZE ,Destination word size" "8,16,32,4"
|
|
bitfld.long 0x00 16.--17. " SRC_WORD_SIZE ,Source word size" "8,16,32,4"
|
|
newline
|
|
bitfld.long 0x00 12.--14. " DEST_SELECT ,Request line for destination" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,OD"
|
|
bitfld.long 0x00 9.--11. " SRC_SELECT ,Request line for source" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,DMIC"
|
|
bitfld.long 0x00 6.--7. " CHANNEL_PRIORITY ,Channel priority level" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " TRANSFER_TYPE ,Transfer type" "Memory-to-memory,Memory-to-peripheral,Peripheral-to-memory,Peripheral-to-peripheral"
|
|
bitfld.long 0x00 3. " DEST_ADDR_INC ,Destination address increment" "Not incremented,Incremented"
|
|
bitfld.long 0x00 2. " SRC_ADDR_INC ,Source address increment" "Not incremented,Incremented"
|
|
newline
|
|
bitfld.long 0x00 1. " ADDR_MODE ,Addressing mode" "Circular,Linear"
|
|
bitfld.long 0x00 0. " ENABLE ,Channel enable" "Disabled,Enabled"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SRC_BASE_ADDR,Channel 1 Source Base Address"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DEST_BASE_ADDR,Channel 1 Destination Base Address"
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "CTRL1,Channel 1 Transfer Control"
|
|
hexmask.long.word 0x00 16.--31. 1. " COUNTER_INT_VALUE ,Counter interrupt value"
|
|
hexmask.long.word 0x00 0.--15. 1. " TRANSFER_LENGTH ,Data transfer length"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "NEXT_SRC_ADDR,Channel 1 Next Source Address"
|
|
rgroup.long 0xA0++0x03
|
|
line.long 0x00 "NEXT_DEST_ADDR,Channel 1 Next Destination Address"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "WORD_CNT,Channel 1 Word Count"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMA_WORD_CNT ,Number of words"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "STATUS,Status Channel 1"
|
|
rbitfld.long 0x00 5.--7. " STATE ,Channel state" "IDLE,CHK_SRC_DST,WAIT_SRC_RDY,WAIT_RD_COMP,CHK_DST,DIS_CH,WAIT_DST_RDY,WAIT_WR_COMP"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x00 12. " ERROR_INT_SET/CLR ,State machine error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x00 11. " COMPLETE_INT_SET/CLR ,Complete interrupt" "No interrupt,Interrupt"
|
|
newline
|
|
setclrfld.long 0x00 2. 0x00 2. 0x00 10. " COUNTER_INT_SET/CLR ,Counter interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x00 1. 0x00 9. " START_INT_SET/CLR ,Start interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x00 8. " DISABLE_INT_SET/CLR ,Channel disable interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Channel 2"
|
|
base ad:0x40000608
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Channel 2 Control And Configuration"
|
|
bitfld.long 0x00 30.--31. " DEST_ADDR_STEP_SIZE ,Destination address step size" "1,2,3,4"
|
|
bitfld.long 0x00 28.--29. " SRC_ADDR_STEP_SIZE ,Source address step size" "1,2,3,4"
|
|
bitfld.long 0x00 27. " DEST_ADDR_STEP_MODE ,Destination address configuration" "Increment,Decrement"
|
|
newline
|
|
bitfld.long 0x00 26. " SRC_ADDR_STEP_MODE ,Source address configuration" "Increment,Decrement"
|
|
bitfld.long 0x00 25. " BYTE_ORDER ,Byte ordering" "Little endian,Big endian"
|
|
bitfld.long 0x00 24. " DISABLE_INT_ENABLE ,DMA channel disabled interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 23. " ERROR_INT_ENABLE ,State machine error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " COMPLETE_INT_ENABLE ,DMA transfer completed interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " COUNTER_INT_ENABLE ,DMA transfer reached counter value interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 20. " START_INT_ENABLE ,DMA transfer started interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 18.--19. " DEST_WORD_SIZE ,Destination word size" "8,16,32,4"
|
|
bitfld.long 0x00 16.--17. " SRC_WORD_SIZE ,Source word size" "8,16,32,4"
|
|
newline
|
|
bitfld.long 0x00 12.--14. " DEST_SELECT ,Request line for destination" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,OD"
|
|
bitfld.long 0x00 9.--11. " SRC_SELECT ,Request line for source" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,DMIC"
|
|
bitfld.long 0x00 6.--7. " CHANNEL_PRIORITY ,Channel priority level" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " TRANSFER_TYPE ,Transfer type" "Memory-to-memory,Memory-to-peripheral,Peripheral-to-memory,Peripheral-to-peripheral"
|
|
bitfld.long 0x00 3. " DEST_ADDR_INC ,Destination address increment" "Not incremented,Incremented"
|
|
bitfld.long 0x00 2. " SRC_ADDR_INC ,Source address increment" "Not incremented,Incremented"
|
|
newline
|
|
bitfld.long 0x00 1. " ADDR_MODE ,Addressing mode" "Circular,Linear"
|
|
bitfld.long 0x00 0. " ENABLE ,Channel enable" "Disabled,Enabled"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SRC_BASE_ADDR,Channel 2 Source Base Address"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DEST_BASE_ADDR,Channel 2 Destination Base Address"
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "CTRL1,Channel 2 Transfer Control"
|
|
hexmask.long.word 0x00 16.--31. 1. " COUNTER_INT_VALUE ,Counter interrupt value"
|
|
hexmask.long.word 0x00 0.--15. 1. " TRANSFER_LENGTH ,Data transfer length"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "NEXT_SRC_ADDR,Channel 2 Next Source Address"
|
|
rgroup.long 0xA0++0x03
|
|
line.long 0x00 "NEXT_DEST_ADDR,Channel 2 Next Destination Address"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "WORD_CNT,Channel 2 Word Count"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMA_WORD_CNT ,Number of words"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "STATUS,Status Channel 2"
|
|
rbitfld.long 0x00 5.--7. " STATE ,Channel state" "IDLE,CHK_SRC_DST,WAIT_SRC_RDY,WAIT_RD_COMP,CHK_DST,DIS_CH,WAIT_DST_RDY,WAIT_WR_COMP"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x00 12. " ERROR_INT_SET/CLR ,State machine error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x00 11. " COMPLETE_INT_SET/CLR ,Complete interrupt" "No interrupt,Interrupt"
|
|
newline
|
|
setclrfld.long 0x00 2. 0x00 2. 0x00 10. " COUNTER_INT_SET/CLR ,Counter interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x00 1. 0x00 9. " START_INT_SET/CLR ,Start interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x00 8. " DISABLE_INT_SET/CLR ,Channel disable interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Channel 3"
|
|
base ad:0x4000060C
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Channel 3 Control And Configuration"
|
|
bitfld.long 0x00 30.--31. " DEST_ADDR_STEP_SIZE ,Destination address step size" "1,2,3,4"
|
|
bitfld.long 0x00 28.--29. " SRC_ADDR_STEP_SIZE ,Source address step size" "1,2,3,4"
|
|
bitfld.long 0x00 27. " DEST_ADDR_STEP_MODE ,Destination address configuration" "Increment,Decrement"
|
|
newline
|
|
bitfld.long 0x00 26. " SRC_ADDR_STEP_MODE ,Source address configuration" "Increment,Decrement"
|
|
bitfld.long 0x00 25. " BYTE_ORDER ,Byte ordering" "Little endian,Big endian"
|
|
bitfld.long 0x00 24. " DISABLE_INT_ENABLE ,DMA channel disabled interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 23. " ERROR_INT_ENABLE ,State machine error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " COMPLETE_INT_ENABLE ,DMA transfer completed interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " COUNTER_INT_ENABLE ,DMA transfer reached counter value interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 20. " START_INT_ENABLE ,DMA transfer started interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 18.--19. " DEST_WORD_SIZE ,Destination word size" "8,16,32,4"
|
|
bitfld.long 0x00 16.--17. " SRC_WORD_SIZE ,Source word size" "8,16,32,4"
|
|
newline
|
|
bitfld.long 0x00 12.--14. " DEST_SELECT ,Request line for destination" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,OD"
|
|
bitfld.long 0x00 9.--11. " SRC_SELECT ,Request line for source" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,DMIC"
|
|
bitfld.long 0x00 6.--7. " CHANNEL_PRIORITY ,Channel priority level" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " TRANSFER_TYPE ,Transfer type" "Memory-to-memory,Memory-to-peripheral,Peripheral-to-memory,Peripheral-to-peripheral"
|
|
bitfld.long 0x00 3. " DEST_ADDR_INC ,Destination address increment" "Not incremented,Incremented"
|
|
bitfld.long 0x00 2. " SRC_ADDR_INC ,Source address increment" "Not incremented,Incremented"
|
|
newline
|
|
bitfld.long 0x00 1. " ADDR_MODE ,Addressing mode" "Circular,Linear"
|
|
bitfld.long 0x00 0. " ENABLE ,Channel enable" "Disabled,Enabled"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SRC_BASE_ADDR,Channel 3 Source Base Address"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DEST_BASE_ADDR,Channel 3 Destination Base Address"
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "CTRL1,Channel 3 Transfer Control"
|
|
hexmask.long.word 0x00 16.--31. 1. " COUNTER_INT_VALUE ,Counter interrupt value"
|
|
hexmask.long.word 0x00 0.--15. 1. " TRANSFER_LENGTH ,Data transfer length"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "NEXT_SRC_ADDR,Channel 3 Next Source Address"
|
|
rgroup.long 0xA0++0x03
|
|
line.long 0x00 "NEXT_DEST_ADDR,Channel 3 Next Destination Address"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "WORD_CNT,Channel 3 Word Count"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMA_WORD_CNT ,Number of words"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "STATUS,Status Channel 3"
|
|
rbitfld.long 0x00 5.--7. " STATE ,Channel state" "IDLE,CHK_SRC_DST,WAIT_SRC_RDY,WAIT_RD_COMP,CHK_DST,DIS_CH,WAIT_DST_RDY,WAIT_WR_COMP"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x00 12. " ERROR_INT_SET/CLR ,State machine error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x00 11. " COMPLETE_INT_SET/CLR ,Complete interrupt" "No interrupt,Interrupt"
|
|
newline
|
|
setclrfld.long 0x00 2. 0x00 2. 0x00 10. " COUNTER_INT_SET/CLR ,Counter interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x00 1. 0x00 9. " START_INT_SET/CLR ,Start interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x00 8. " DISABLE_INT_SET/CLR ,Channel disable interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Channel 4"
|
|
base ad:0x40000610
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Channel 4 Control And Configuration"
|
|
bitfld.long 0x00 30.--31. " DEST_ADDR_STEP_SIZE ,Destination address step size" "1,2,3,4"
|
|
bitfld.long 0x00 28.--29. " SRC_ADDR_STEP_SIZE ,Source address step size" "1,2,3,4"
|
|
bitfld.long 0x00 27. " DEST_ADDR_STEP_MODE ,Destination address configuration" "Increment,Decrement"
|
|
newline
|
|
bitfld.long 0x00 26. " SRC_ADDR_STEP_MODE ,Source address configuration" "Increment,Decrement"
|
|
bitfld.long 0x00 25. " BYTE_ORDER ,Byte ordering" "Little endian,Big endian"
|
|
bitfld.long 0x00 24. " DISABLE_INT_ENABLE ,DMA channel disabled interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 23. " ERROR_INT_ENABLE ,State machine error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " COMPLETE_INT_ENABLE ,DMA transfer completed interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " COUNTER_INT_ENABLE ,DMA transfer reached counter value interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 20. " START_INT_ENABLE ,DMA transfer started interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 18.--19. " DEST_WORD_SIZE ,Destination word size" "8,16,32,4"
|
|
bitfld.long 0x00 16.--17. " SRC_WORD_SIZE ,Source word size" "8,16,32,4"
|
|
newline
|
|
bitfld.long 0x00 12.--14. " DEST_SELECT ,Request line for destination" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,OD"
|
|
bitfld.long 0x00 9.--11. " SRC_SELECT ,Request line for source" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,DMIC"
|
|
bitfld.long 0x00 6.--7. " CHANNEL_PRIORITY ,Channel priority level" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " TRANSFER_TYPE ,Transfer type" "Memory-to-memory,Memory-to-peripheral,Peripheral-to-memory,Peripheral-to-peripheral"
|
|
bitfld.long 0x00 3. " DEST_ADDR_INC ,Destination address increment" "Not incremented,Incremented"
|
|
bitfld.long 0x00 2. " SRC_ADDR_INC ,Source address increment" "Not incremented,Incremented"
|
|
newline
|
|
bitfld.long 0x00 1. " ADDR_MODE ,Addressing mode" "Circular,Linear"
|
|
bitfld.long 0x00 0. " ENABLE ,Channel enable" "Disabled,Enabled"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SRC_BASE_ADDR,Channel 4 Source Base Address"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DEST_BASE_ADDR,Channel 4 Destination Base Address"
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "CTRL1,Channel 4 Transfer Control"
|
|
hexmask.long.word 0x00 16.--31. 1. " COUNTER_INT_VALUE ,Counter interrupt value"
|
|
hexmask.long.word 0x00 0.--15. 1. " TRANSFER_LENGTH ,Data transfer length"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "NEXT_SRC_ADDR,Channel 4 Next Source Address"
|
|
rgroup.long 0xA0++0x03
|
|
line.long 0x00 "NEXT_DEST_ADDR,Channel 4 Next Destination Address"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "WORD_CNT,Channel 4 Word Count"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMA_WORD_CNT ,Number of words"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "STATUS,Status Channel 4"
|
|
rbitfld.long 0x00 5.--7. " STATE ,Channel state" "IDLE,CHK_SRC_DST,WAIT_SRC_RDY,WAIT_RD_COMP,CHK_DST,DIS_CH,WAIT_DST_RDY,WAIT_WR_COMP"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x00 12. " ERROR_INT_SET/CLR ,State machine error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x00 11. " COMPLETE_INT_SET/CLR ,Complete interrupt" "No interrupt,Interrupt"
|
|
newline
|
|
setclrfld.long 0x00 2. 0x00 2. 0x00 10. " COUNTER_INT_SET/CLR ,Counter interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x00 1. 0x00 9. " START_INT_SET/CLR ,Start interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x00 8. " DISABLE_INT_SET/CLR ,Channel disable interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Channel 5"
|
|
base ad:0x40000614
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Channel 5 Control And Configuration"
|
|
bitfld.long 0x00 30.--31. " DEST_ADDR_STEP_SIZE ,Destination address step size" "1,2,3,4"
|
|
bitfld.long 0x00 28.--29. " SRC_ADDR_STEP_SIZE ,Source address step size" "1,2,3,4"
|
|
bitfld.long 0x00 27. " DEST_ADDR_STEP_MODE ,Destination address configuration" "Increment,Decrement"
|
|
newline
|
|
bitfld.long 0x00 26. " SRC_ADDR_STEP_MODE ,Source address configuration" "Increment,Decrement"
|
|
bitfld.long 0x00 25. " BYTE_ORDER ,Byte ordering" "Little endian,Big endian"
|
|
bitfld.long 0x00 24. " DISABLE_INT_ENABLE ,DMA channel disabled interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 23. " ERROR_INT_ENABLE ,State machine error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " COMPLETE_INT_ENABLE ,DMA transfer completed interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " COUNTER_INT_ENABLE ,DMA transfer reached counter value interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 20. " START_INT_ENABLE ,DMA transfer started interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 18.--19. " DEST_WORD_SIZE ,Destination word size" "8,16,32,4"
|
|
bitfld.long 0x00 16.--17. " SRC_WORD_SIZE ,Source word size" "8,16,32,4"
|
|
newline
|
|
bitfld.long 0x00 12.--14. " DEST_SELECT ,Request line for destination" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,OD"
|
|
bitfld.long 0x00 9.--11. " SRC_SELECT ,Request line for source" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,DMIC"
|
|
bitfld.long 0x00 6.--7. " CHANNEL_PRIORITY ,Channel priority level" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " TRANSFER_TYPE ,Transfer type" "Memory-to-memory,Memory-to-peripheral,Peripheral-to-memory,Peripheral-to-peripheral"
|
|
bitfld.long 0x00 3. " DEST_ADDR_INC ,Destination address increment" "Not incremented,Incremented"
|
|
bitfld.long 0x00 2. " SRC_ADDR_INC ,Source address increment" "Not incremented,Incremented"
|
|
newline
|
|
bitfld.long 0x00 1. " ADDR_MODE ,Addressing mode" "Circular,Linear"
|
|
bitfld.long 0x00 0. " ENABLE ,Channel enable" "Disabled,Enabled"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SRC_BASE_ADDR,Channel 5 Source Base Address"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DEST_BASE_ADDR,Channel 5 Destination Base Address"
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "CTRL1,Channel 5 Transfer Control"
|
|
hexmask.long.word 0x00 16.--31. 1. " COUNTER_INT_VALUE ,Counter interrupt value"
|
|
hexmask.long.word 0x00 0.--15. 1. " TRANSFER_LENGTH ,Data transfer length"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "NEXT_SRC_ADDR,Channel 5 Next Source Address"
|
|
rgroup.long 0xA0++0x03
|
|
line.long 0x00 "NEXT_DEST_ADDR,Channel 5 Next Destination Address"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "WORD_CNT,Channel 5 Word Count"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMA_WORD_CNT ,Number of words"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "STATUS,Status Channel 5"
|
|
rbitfld.long 0x00 5.--7. " STATE ,Channel state" "IDLE,CHK_SRC_DST,WAIT_SRC_RDY,WAIT_RD_COMP,CHK_DST,DIS_CH,WAIT_DST_RDY,WAIT_WR_COMP"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x00 12. " ERROR_INT_SET/CLR ,State machine error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x00 11. " COMPLETE_INT_SET/CLR ,Complete interrupt" "No interrupt,Interrupt"
|
|
newline
|
|
setclrfld.long 0x00 2. 0x00 2. 0x00 10. " COUNTER_INT_SET/CLR ,Counter interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x00 1. 0x00 9. " START_INT_SET/CLR ,Start interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x00 8. " DISABLE_INT_SET/CLR ,Channel disable interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Channel 6"
|
|
base ad:0x40000618
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Channel 6 Control And Configuration"
|
|
bitfld.long 0x00 30.--31. " DEST_ADDR_STEP_SIZE ,Destination address step size" "1,2,3,4"
|
|
bitfld.long 0x00 28.--29. " SRC_ADDR_STEP_SIZE ,Source address step size" "1,2,3,4"
|
|
bitfld.long 0x00 27. " DEST_ADDR_STEP_MODE ,Destination address configuration" "Increment,Decrement"
|
|
newline
|
|
bitfld.long 0x00 26. " SRC_ADDR_STEP_MODE ,Source address configuration" "Increment,Decrement"
|
|
bitfld.long 0x00 25. " BYTE_ORDER ,Byte ordering" "Little endian,Big endian"
|
|
bitfld.long 0x00 24. " DISABLE_INT_ENABLE ,DMA channel disabled interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 23. " ERROR_INT_ENABLE ,State machine error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " COMPLETE_INT_ENABLE ,DMA transfer completed interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " COUNTER_INT_ENABLE ,DMA transfer reached counter value interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 20. " START_INT_ENABLE ,DMA transfer started interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 18.--19. " DEST_WORD_SIZE ,Destination word size" "8,16,32,4"
|
|
bitfld.long 0x00 16.--17. " SRC_WORD_SIZE ,Source word size" "8,16,32,4"
|
|
newline
|
|
bitfld.long 0x00 12.--14. " DEST_SELECT ,Request line for destination" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,OD"
|
|
bitfld.long 0x00 9.--11. " SRC_SELECT ,Request line for source" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,DMIC"
|
|
bitfld.long 0x00 6.--7. " CHANNEL_PRIORITY ,Channel priority level" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " TRANSFER_TYPE ,Transfer type" "Memory-to-memory,Memory-to-peripheral,Peripheral-to-memory,Peripheral-to-peripheral"
|
|
bitfld.long 0x00 3. " DEST_ADDR_INC ,Destination address increment" "Not incremented,Incremented"
|
|
bitfld.long 0x00 2. " SRC_ADDR_INC ,Source address increment" "Not incremented,Incremented"
|
|
newline
|
|
bitfld.long 0x00 1. " ADDR_MODE ,Addressing mode" "Circular,Linear"
|
|
bitfld.long 0x00 0. " ENABLE ,Channel enable" "Disabled,Enabled"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SRC_BASE_ADDR,Channel 6 Source Base Address"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DEST_BASE_ADDR,Channel 6 Destination Base Address"
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "CTRL1,Channel 6 Transfer Control"
|
|
hexmask.long.word 0x00 16.--31. 1. " COUNTER_INT_VALUE ,Counter interrupt value"
|
|
hexmask.long.word 0x00 0.--15. 1. " TRANSFER_LENGTH ,Data transfer length"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "NEXT_SRC_ADDR,Channel 6 Next Source Address"
|
|
rgroup.long 0xA0++0x03
|
|
line.long 0x00 "NEXT_DEST_ADDR,Channel 6 Next Destination Address"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "WORD_CNT,Channel 6 Word Count"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMA_WORD_CNT ,Number of words"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "STATUS,Status Channel 6"
|
|
rbitfld.long 0x00 5.--7. " STATE ,Channel state" "IDLE,CHK_SRC_DST,WAIT_SRC_RDY,WAIT_RD_COMP,CHK_DST,DIS_CH,WAIT_DST_RDY,WAIT_WR_COMP"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x00 12. " ERROR_INT_SET/CLR ,State machine error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x00 11. " COMPLETE_INT_SET/CLR ,Complete interrupt" "No interrupt,Interrupt"
|
|
newline
|
|
setclrfld.long 0x00 2. 0x00 2. 0x00 10. " COUNTER_INT_SET/CLR ,Counter interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x00 1. 0x00 9. " START_INT_SET/CLR ,Start interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x00 8. " DISABLE_INT_SET/CLR ,Channel disable interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Channel 7"
|
|
base ad:0x4000061C
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CTRL0,Channel 7 Control And Configuration"
|
|
bitfld.long 0x00 30.--31. " DEST_ADDR_STEP_SIZE ,Destination address step size" "1,2,3,4"
|
|
bitfld.long 0x00 28.--29. " SRC_ADDR_STEP_SIZE ,Source address step size" "1,2,3,4"
|
|
bitfld.long 0x00 27. " DEST_ADDR_STEP_MODE ,Destination address configuration" "Increment,Decrement"
|
|
newline
|
|
bitfld.long 0x00 26. " SRC_ADDR_STEP_MODE ,Source address configuration" "Increment,Decrement"
|
|
bitfld.long 0x00 25. " BYTE_ORDER ,Byte ordering" "Little endian,Big endian"
|
|
bitfld.long 0x00 24. " DISABLE_INT_ENABLE ,DMA channel disabled interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 23. " ERROR_INT_ENABLE ,State machine error interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " COMPLETE_INT_ENABLE ,DMA transfer completed interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " COUNTER_INT_ENABLE ,DMA transfer reached counter value interrupt" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 20. " START_INT_ENABLE ,DMA transfer started interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x00 18.--19. " DEST_WORD_SIZE ,Destination word size" "8,16,32,4"
|
|
bitfld.long 0x00 16.--17. " SRC_WORD_SIZE ,Source word size" "8,16,32,4"
|
|
newline
|
|
bitfld.long 0x00 12.--14. " DEST_SELECT ,Request line for destination" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,OD"
|
|
bitfld.long 0x00 9.--11. " SRC_SELECT ,Request line for source" "I2C,SPI0,SPI1,PCM,UART,ASRC,PBUS,DMIC"
|
|
bitfld.long 0x00 6.--7. " CHANNEL_PRIORITY ,Channel priority level" "0,1,2,3"
|
|
newline
|
|
bitfld.long 0x00 4.--5. " TRANSFER_TYPE ,Transfer type" "Memory-to-memory,Memory-to-peripheral,Peripheral-to-memory,Peripheral-to-peripheral"
|
|
bitfld.long 0x00 3. " DEST_ADDR_INC ,Destination address increment" "Not incremented,Incremented"
|
|
bitfld.long 0x00 2. " SRC_ADDR_INC ,Source address increment" "Not incremented,Incremented"
|
|
newline
|
|
bitfld.long 0x00 1. " ADDR_MODE ,Addressing mode" "Circular,Linear"
|
|
bitfld.long 0x00 0. " ENABLE ,Channel enable" "Disabled,Enabled"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "SRC_BASE_ADDR,Channel 7 Source Base Address"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "DEST_BASE_ADDR,Channel 7 Destination Base Address"
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "CTRL1,Channel 7 Transfer Control"
|
|
hexmask.long.word 0x00 16.--31. 1. " COUNTER_INT_VALUE ,Counter interrupt value"
|
|
hexmask.long.word 0x00 0.--15. 1. " TRANSFER_LENGTH ,Data transfer length"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "NEXT_SRC_ADDR,Channel 7 Next Source Address"
|
|
rgroup.long 0xA0++0x03
|
|
line.long 0x00 "NEXT_DEST_ADDR,Channel 7 Next Destination Address"
|
|
rgroup.long 0xC0++0x03
|
|
line.long 0x00 "WORD_CNT,Channel 7 Word Count"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMA_WORD_CNT ,Number of words"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "STATUS,Status Channel 7"
|
|
rbitfld.long 0x00 5.--7. " STATE ,Channel state" "IDLE,CHK_SRC_DST,WAIT_SRC_RDY,WAIT_RD_COMP,CHK_DST,DIS_CH,WAIT_DST_RDY,WAIT_WR_COMP"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x00 12. " ERROR_INT_SET/CLR ,State machine error interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x00 11. " COMPLETE_INT_SET/CLR ,Complete interrupt" "No interrupt,Interrupt"
|
|
newline
|
|
setclrfld.long 0x00 2. 0x00 2. 0x00 10. " COUNTER_INT_SET/CLR ,Counter interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 1. 0x00 1. 0x00 9. " START_INT_SET/CLR ,Start interrupt" "No interrupt,Interrupt"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x00 8. " DISABLE_INT_SET/CLR ,Channel disable interrupt" "No interrupt,Interrupt"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree.open "Timers"
|
|
tree "Timer 0"
|
|
base ad:0x40000400
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register 0"
|
|
bitfld.long 0x00 29.--31. " MULTI_COUNT ,Multi-count value" "1,2,3,4,5,6,7,8"
|
|
bitfld.long 0x00 28. " MODE ,Timer mode" "Shot,Free"
|
|
bitfld.long 0x00 27. " CLK_SRC ,Clock source" "SLOWCLK/32,SLOWCLK/2"
|
|
bitfld.long 0x00 24.--26. " PRESCALE ,Prescale value" "/1,/2,/4,/8,/16,/32,/64,/128"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TIMEOUT_VALUE ,Number of timer clock cycles to time-out"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "CTRL,General-Purpose Timer Control/Status Register 0"
|
|
rbitfld.long 0x00 2. " TIMER_STATUS ,Timer status" "Inactive,Active"
|
|
bitfld.long 0x00 1. " TIMER_START ,Timer (re)start" "No effect,(Re)start"
|
|
bitfld.long 0x00 0. " TIMER_STOP ,Timer stop" "No effect,Stop"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "VAL,Timer Current Value Register 0"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TIMER_VALUE ,Timer 0 value"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Timer 1"
|
|
base ad:0x40000404
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register 1"
|
|
bitfld.long 0x00 29.--31. " MULTI_COUNT ,Multi-count value" "1,2,3,4,5,6,7,8"
|
|
bitfld.long 0x00 28. " MODE ,Timer mode" "Shot,Free"
|
|
bitfld.long 0x00 27. " CLK_SRC ,Clock source" "SLOWCLK/32,SLOWCLK/2"
|
|
bitfld.long 0x00 24.--26. " PRESCALE ,Prescale value" "/1,/2,/4,/8,/16,/32,/64,/128"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TIMEOUT_VALUE ,Number of timer clock cycles to time-out"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "CTRL,General-Purpose Timer Control/Status Register 1"
|
|
rbitfld.long 0x00 2. " TIMER_STATUS ,Timer status" "Inactive,Active"
|
|
bitfld.long 0x00 1. " TIMER_START ,Timer (re)start" "No effect,(Re)start"
|
|
bitfld.long 0x00 0. " TIMER_STOP ,Timer stop" "No effect,Stop"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "VAL,Timer Current Value Register 1"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TIMER_VALUE ,Timer 1 value"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Timer 2"
|
|
base ad:0x40000408
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register 2"
|
|
bitfld.long 0x00 29.--31. " MULTI_COUNT ,Multi-count value" "1,2,3,4,5,6,7,8"
|
|
bitfld.long 0x00 28. " MODE ,Timer mode" "Shot,Free"
|
|
bitfld.long 0x00 27. " CLK_SRC ,Clock source" "SLOWCLK/32,SLOWCLK/2"
|
|
bitfld.long 0x00 24.--26. " PRESCALE ,Prescale value" "/1,/2,/4,/8,/16,/32,/64,/128"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TIMEOUT_VALUE ,Number of timer clock cycles to time-out"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "CTRL,General-Purpose Timer Control/Status Register 2"
|
|
rbitfld.long 0x00 2. " TIMER_STATUS ,Timer status" "Inactive,Active"
|
|
bitfld.long 0x00 1. " TIMER_START ,Timer (re)start" "No effect,(Re)start"
|
|
bitfld.long 0x00 0. " TIMER_STOP ,Timer stop" "No effect,Stop"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "VAL,Timer Current Value Register 2"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TIMER_VALUE ,Timer 2 value"
|
|
width 0x0B
|
|
tree.end
|
|
tree "Timer 3"
|
|
base ad:0x4000040C
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register 3"
|
|
bitfld.long 0x00 29.--31. " MULTI_COUNT ,Multi-count value" "1,2,3,4,5,6,7,8"
|
|
bitfld.long 0x00 28. " MODE ,Timer mode" "Shot,Free"
|
|
bitfld.long 0x00 27. " CLK_SRC ,Clock source" "SLOWCLK/32,SLOWCLK/2"
|
|
bitfld.long 0x00 24.--26. " PRESCALE ,Prescale value" "/1,/2,/4,/8,/16,/32,/64,/128"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TIMEOUT_VALUE ,Number of timer clock cycles to time-out"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "CTRL,General-Purpose Timer Control/Status Register 3"
|
|
rbitfld.long 0x00 2. " TIMER_STATUS ,Timer status" "Inactive,Active"
|
|
bitfld.long 0x00 1. " TIMER_START ,Timer (re)start" "No effect,(Re)start"
|
|
bitfld.long 0x00 0. " TIMER_STOP ,Timer stop" "No effect,Stop"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "VAL,Timer Current Value Register 3"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TIMER_VALUE ,Timer 3 value"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "WDT (Watchdog Timer)"
|
|
base ad:0x40000300
|
|
width 6.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "CFG,Configuration Register"
|
|
bitfld.long 0x00 0.--3. " TIMEOUT_VALUE ,Watchdog timeout period" "2.05ms,4.10ms,8.19ms,16.38ms,32.77ms,65.54ms,131.07ms,262.14ms,524.30ms,1.05s,2.10s,4.19s,4.19s,4.19s,4.19s,4.19s"
|
|
wgroup.long 0x04++0x03
|
|
line.long 0x00 "CTRL,Refresh Control Register"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree.open "AUD (Audio)"
|
|
tree "DMIC (Digital Microphone Inputs)"
|
|
base ad:0x40000E00
|
|
width 18.
|
|
group.long 0x00++0x13
|
|
line.long 0x00 "AUDIO_CFG,DMIC And OD Configuration Register"
|
|
bitfld.long 0x00 25. " OD_CLK_SRC ,Output driver clock source" "AUDIOCLK,AUDIOSLOWCLK"
|
|
bitfld.long 0x00 24. " DMIC_CLK_SRC ,DMIC clock source" "AUDIOCLK,AUDIOSLOWCLK"
|
|
bitfld.long 0x00 16.--20. " DEC_RATE ,DMIC input data decimation rate" "64,72,80,,,,,,128,136,,,,,,,,,,,,,,,256,,,,288,?..."
|
|
bitfld.long 0x00 12. " OD_UNDERRUN_PROTECT ,OD_DATA underrun protection enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 11. " OD_DMA_REQ_EN ,DMA request when a new output driver sample is required enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " OD_INT_GEN_EN ,Interrupt generation when a new output driver sample is required enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " OD_DATA_ALIGN ,Data alignment in AUDIO_OD_DATA" "16-bit LSB,18-bit MSB"
|
|
bitfld.long 0x00 8. " OD_ENABLE ,Output driver output enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 7. " DMIC1_DMA_REQ_EN ,DMA request when a new DMIC1 sample is ready enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " DMIC1_INT_GEN_EN ,Interrupt generation when a new DMIC1 sample is ready enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " DMIC1_DATA_ALIGN ,Data alignment in AUDIO_DMIC_DATA_1" "16-bit LSB,18-bit MSB"
|
|
bitfld.long 0x00 4. " DMIC1_ENABLE ,DMIC1 input enable" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 3. " DMIC0_DMA_REQ_EN ,DMA request when a new DMIC0 sample is ready enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " DMIC0_INT_GEN_EN ,Interrupt generation when a new DMIC0 sample is ready enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " DMIC0_DATA_ALIGN ,Data alignment in AUDIO_DMIC_DATA_0" "16-bit LSB,18-bit MSB"
|
|
bitfld.long 0x00 0. " DMIC0_ENABLE ,DMIC0 input enable" "Disabled,Enabled"
|
|
line.long 0x04 "AUDIO_STATUS,DMIC And OD Status Register"
|
|
bitfld.long 0x04 10. " OD_UNDERRUN_FLAG_CLEAR ,Output driver underrun detection reset" "No reset,Reset"
|
|
rbitfld.long 0x04 9. " OD_UNDERRUN_FLAG ,Output driver underrun detection" "Not detected,Detected"
|
|
rbitfld.long 0x04 8. " OD_DATA_REQ_FLAG ,Output driver sample requirement" "Not required,Required"
|
|
bitfld.long 0x04 6. " DMIC1_OVERRUN_FLAG_CLEAR ,DMIC1 overrun detection reset" "No reset,Reset"
|
|
newline
|
|
rbitfld.long 0x04 5. " DMIC1_OVERRUN_FLAG ,DMIC1 driver overrun detection" "Not detected,Detected"
|
|
rbitfld.long 0x04 4. " DMIC1_DATA_RDY_FLAG ,DMIC1 driver sample ready" "Not ready,Ready"
|
|
bitfld.long 0x04 2. " DMIC0_OVERRUN_FLAG_CLEAR ,DMIC0 overrun detection reset" "No reset,Reset"
|
|
rbitfld.long 0x04 1. " DMIC0_OVERRUN_FLAG ,DMIC0 driver overrun detection" "Not detected,Detected"
|
|
newline
|
|
rbitfld.long 0x04 0. " DMIC0_DATA_RDY_FLAG ,DMIC0 driver sample ready" "Not ready,Ready"
|
|
line.long 0x08 "AUDIO_DMIC_CFG,DMIC Configuration Register"
|
|
bitfld.long 0x08 24.--28. " DMIC1_FRAC_DELAY ,DMIC1 fractional delay in samples" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x08 16.--19. " DMIC1_DELAY ,DMIC1 delay" "Disabled,0.125,0.25,0.375,0.5,0.625,0.75,0.875,1,1.125,1.25,1.375,1.5,1.625,1.75,1.875,?..."
|
|
bitfld.long 0x08 12.--14. " DMIC1_DCRM ,DMIC1 cut-off frequency" "Fs/3200,Fs/1600,Fs/800,Fs/400,Fs/200,Fs/100,Fs/50,Disabled,?..."
|
|
bitfld.long 0x08 8.--10. " DMIC0_DCRM ,DMIC0 cut-off frequency" "Fs/3200,Fs/1600,Fs/800,Fs/400,Fs/200,Fs/100,Fs/50,Disabled,?..."
|
|
newline
|
|
bitfld.long 0x08 1. " DMIC1_CLK_EDGE ,DMIC1 input clock edge" "Falling,Rising"
|
|
bitfld.long 0x08 0. " DMIC0_CLK_EDGE ,DMIC1 input clock edge" "Falling,Rising"
|
|
line.long 0x0C "AUDIO_DMIC0_GAIN,DMIC0 Gain Configuration Register"
|
|
hexmask.long.word 0x0C 0.--11. 1. " GAIN ,DMIC0 calibration gain"
|
|
line.long 0x10 "AUDIO_DMIC1_GAIN,DMIC1 Gain Configuration Register"
|
|
hexmask.long.word 0x10 0.--11. 1. " GAIN ,DMIC1 calibration gain"
|
|
rgroup.long 0x14++0x0B
|
|
line.long 0x00 "AUDIO_DMIC_DATA,DMIC0 and DMIC1 Data Register"
|
|
hexmask.long.word 0x00 16.--31. 1. " DMIC1_DATA ,DMIC1 input data"
|
|
hexmask.long.word 0x00 0.--15. 1. " DMIC0_DATA ,DMIC0 input data"
|
|
line.long 0x04 "AUDIO_DMIC0_DATA,DMIC0 Data Register"
|
|
line.long 0x08 "AUDIO_DMIC1_DATA,DMIC1 Data Register"
|
|
width 0x0B
|
|
tree.end
|
|
tree "OD (Output Drivers)"
|
|
base ad:0x40000E20
|
|
width 17.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "AUDIO_OD_CFG,Output Driver Configuration Register"
|
|
bitfld.long 0x00 16.--19. " DCRM ,Output driver cut-off frequency" "Disabled,1.25 Hz,2.5 Hz,3.75 Hz,5 Hz,7.5 Hz,10 Hz,15 Hz,20 Hz,30 Hz,40 Hz,60 Hz,80 Hz,120 Hz,160 Hz,240 Hz"
|
|
bitfld.long 0x00 10. " DITHER ,Sigma-delta modulator dithering enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " CLK_EDGE ,Output driver output clock edge" "Falling,Rising"
|
|
line.long 0x04 "AUDIO_OD_GAIN,Output Driver Gain Configuration Register"
|
|
hexmask.long.word 0x04 0.--11. 1. " GAIN ,Nominal gain"
|
|
newline
|
|
hgroup.long 0x08++0x03
|
|
hide.long 0x00 "AUDIO_OD_DATA,Output Driver Data Register"
|
|
in
|
|
newline
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "AUDIO_SDM_CFG,Sigma-Delta Modulator Configuration Register"
|
|
width 0x0B
|
|
tree.end
|
|
tree "ASCC (Audio Sink Clock Counters)"
|
|
base ad:0x40001000
|
|
width 22.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "AUDIOSINK_CTRL,Audio Sink Clock Control Register"
|
|
bitfld.long 0x00 8. " PHASE_CNT_START_NO_WAIT ,Start the audio sink clock phase counter mechanism without waiting on a sync pulse" "Not started,Started"
|
|
rbitfld.long 0x00 7. " PERIOD_CNT_STATUS ,Audio sink clock period counter status" "Idle,Busy"
|
|
bitfld.long 0x00 6. " PERIOD_CNT_STOP ,Stop the audio sink clock period counter mechanism" "Not stopped,Stopped"
|
|
newline
|
|
bitfld.long 0x00 5. " PERIOD_CNT_START ,Start the audio sink clock period counter mechanism" "Not started,Started"
|
|
rbitfld.long 0x00 4. " PHASE_CNT_MISSED_STATUS ,Audio sink clock phase counter missed status" "Normal,Missed"
|
|
rbitfld.long 0x00 3. " PHASE_CNT_STATUS ,Audio sink clock phase counter status" "Idle,Busy"
|
|
newline
|
|
bitfld.long 0x00 2. " PHASE_CNT_STOP ,Stop the audio sink clock phase counter mechanism" "Not stopped,Stopped"
|
|
bitfld.long 0x00 1. " PHASE_CNT_START ,Start the audio sink clock phase counter mechanism and wait for sync pulse" "Not started,Started"
|
|
bitfld.long 0x00 0. " CNT_RESET ,Reset audio sink clock counter" "No reset,Reset"
|
|
line.long 0x04 "AUDIOSINK_CFG,Audio Sink Clock Configuration Register"
|
|
bitfld.long 0x04 0.--3. " PERIODS_CFG ,Audio sink clock periods the period counter measures number" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16"
|
|
rgroup.long 0x08++0x03
|
|
line.long 0x00 "AUDIOSINK_CNT,Audio Sink Clock Counter Register"
|
|
hexmask.long.word 0x00 0.--11. 1. " CNT ,Audio sink clock counter value"
|
|
group.long 0x0C++0x07
|
|
line.long 0x00 "AUDIOSINK_PHASE_CNT,Audio Sink Clock Counter Register"
|
|
hexmask.long.word 0x00 0.--15. 1. " PHASE_CNT ,Audio sink clock phase counter value"
|
|
line.long 0x04 "AUDIOSINK_PERIOD_CNT,Audio Sink Clock Configuration Register"
|
|
hexmask.long.word 0x04 0.--15. 1. " PERIOD_CNT ,Audio sink clock period counter value"
|
|
width 0x0B
|
|
tree.end
|
|
tree "ASRC (Asynchronous Sample Rate Converter)"
|
|
base ad:0x40001100
|
|
width 17.
|
|
group.long 0x00++0x23
|
|
line.long 0x00 "ASRC_CTRL,ASRC Control Register"
|
|
rbitfld.long 0x00 14. " ASRC_PROC_STATUS ,ASRC processing state" "Idle,Busy"
|
|
rbitfld.long 0x00 13. " ASRC_OUT_REQ ,ASRC_OUT register status" "Idle,Ready"
|
|
rbitfld.long 0x00 12. " ASRC_IN_REQ ,ASRC_IN register status" "Idle,Ready"
|
|
rbitfld.long 0x00 11. " ASRC_UPDATE_ERR ,ASRC state/configuration update error interrupt status" "Idle,Pending"
|
|
newline
|
|
rbitfld.long 0x00 10. " ASRC_IN_ERR ,ASRC input interface error interrupt status" "Idle,Pending"
|
|
bitfld.long 0x00 9. " ASRC_UPDATE_ERR_CLR ,ASRC update/configuration error interrupt status clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 8. " ASRC_IN_ERR_CLR ,ASRC input interface error interrupt clear" "Not cleared,Cleared"
|
|
bitfld.long 0x00 3. " ASRC_RESET ,ASRC reset" "No reset,Reset"
|
|
newline
|
|
rbitfld.long 0x00 2. " ASRC_EN_STATUS ,Re-sampler block status enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " ASRC_DISABLE ,Re-sampler block disable" "No,Yes"
|
|
bitfld.long 0x00 0. " ASRC_ENABLE ,Re-sampler block enable" "Disabled,Enabled"
|
|
line.long 0x04 "ASRC_INT_ENABLE,ASRC Interrupt Mask Register"
|
|
bitfld.long 0x04 3. " ASRC_UPDATE_ERR ,ASRC state/configuration update error interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 2. " ASRC_IN_ERR ,ASRC input interface error interrupt mask" "Not masked,Masked"
|
|
bitfld.long 0x04 1. " ASRC_OUT_REQ ,ASRC_OUT register interrupt status" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 0. " ASRC_IN_REQ ,ASRC_IN register interrupt status" "No interrupt,Interrupt"
|
|
line.long 0x08 "ASRC_OUT,ASRC Output Data Register"
|
|
hexmask.long.word 0x08 0.--15. 1. " ASRC_OUT ,Audio sample output"
|
|
line.long 0x0C "ASRC_IN,ASRC Input Data Register"
|
|
hexmask.long.word 0x0C 0.--15. 1. " ASRC_IN ,Audio sample input"
|
|
line.long 0x10 "ASRC_CFG,ASRC Configuration Register"
|
|
bitfld.long 0x10 2. " WDF_TYPE ,WDF type selection" "Low delay,Wide band response"
|
|
bitfld.long 0x10 0.--1. " ASRC_MODE ,ASRC mode" "Interpolation,Decimation 1,,Decimation 3"
|
|
line.long 0x14 "ASRC_OUTPUT_CNT,ASRC Output Sample Counter"
|
|
hexmask.long.word 0x14 0.--11. 1. " ASRC_OUTPUT_CNT ,ASRC output sample counter"
|
|
line.long 0x18 "ASRC_PHASE_INC,ASRC Phase Counter Increment Value"
|
|
line.long 0x1C "ASRC_PHASE_CNT,ASRC Phase Counter"
|
|
line.long 0x20 "ASRC_STATE_MEM,ASRC State Memory 0 To 29 (32 Bit)"
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
newline
|