; -------------------------------------------------------------------------------- ; @Title: How to use the Lauterbach debugger on a Nitrogen6x-SOM target ; @Description: Needed board modification ; @Keywords: Raspberry Pi, BCM2835, BCM2708, ARM11 ; @Author: KJM ; @Board: Nitrogen6x-SOM ; @Chip: IMX6* ; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: readme.txt 18877 2022-02-02 07:04:07Z bschroefel $ Using JTAG on the Nitrogen6x-SOM board requires that the RN1 set of resistors are not populated, on both the SOM board and the carrier board. Also, the RN2 set of resistors must be populated, on both the SOM board and the carrier board. On the daughter card, please make sure that jumpers J3, J4, and J6 are populated, with the remaining jumpers left open. Please use the start-up scripts from demo/arm/hardware/imx6/sabrelite