woody/Gen4_R-Car_Trace32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
56d7259bc5914084f5f28e6f1b4fa19789c3f699
Gen4_R-Car_Trace32/2_Trunk/demo/arm/flash/rm48.cmm
woody d411edd9b4 add Trace32 File
2025-10-14 09:52:32 +09:00

269 lines
10 KiB
Plaintext
Raw Blame History

; --------------------------------------------------------------------------------
; @Title: Generic script for RM48 internal flash
;
; @Description:
;
; Flash declaration of TI RM48 internal flash.
;
; Script arguments:
;
; DO rm48 [CPU=<cpu>] [PREPAREONLY] [AUTOECC=0|1] [DUALPORT=0|1]
;
; CPU=<cpu> selects CPU derivative <cpu>. <cpu> can be CPU name out of the
; table listed below. For these derivatives the flash declaration
; is done by the script.
;
; PREPAREONLY only declares flash but does not execute flash programming
;
; AUTOECC default value is 1
;
; DUALPORT default value is 0 (disabled). If DualPort mode is enabled
; flash algorithm stays running until flash programming is
; finished. Data is tranferred via dual-port memory access.
;
; For example:
;
; DO ~~/demo/arm/flash/rm48 CPU=RM48L950-ZWT DUALPORT=1 PREPAREONLY
;
; List of RM48 derivatives and their configuration:
;
; EEPROM
; Program emulation
; CPU-Type Flash Flash RAM
; --------------------------------------------------------------------------------
; RM48L530-PGE 2MB 64kB 192kB
; RM48L530-ZWT 2MB 64kB 192kB
; RM48L540-PGE 2MB 64kB 192kB
; RM48L540-ZWT 2MB 64kB 192kB
; RM48L550-PGE 2MB 64kB 192kB
; RM48L550-ZWT 2MB 64kB 192kB
; RM48L730-PGE 2MB 64kB 256kB
; RM48L730-ZWT 2MB 64kB 256kB
; RM48L740-PGE 2MB 64kB 256kB
; RM48L740-ZWT 2MB 64kB 256kB
; RM48L750-PGE 2MB 64kB 256kB
; RM48L750-ZWT 2MB 64kB 256kB
; RM48L930-PGE 3MB 64kB 256kB
; RM48L930-ZWT 3MB 64kB 256kB
; RM48L940-PGE 3MB 64kB 256kB
; RM48L940-ZWT 3MB 64kB 256kB
; RM48L950-PGE 3MB 64kB 256kB
; RM48L950-ZWT 3MB 64kB 256kB
; RM48L952-PGE 3MB 64kB 256kB
; RM48L952-ZWT 3MB 64kB 256kB
;
; HINTS:
;
; Flash programming algorithm is linked to address 0x08000000 and is not
; position independent. Code address of FLASH.TARGET command has not be
; changed.
;
; OTP sectors can be programmed using FLASH.Program with /OTP option.
; For example with:
;
; FLASH.Program 0xF0000000--0xF0000FFF /OTP
; Data.Set ...
; ...
; FLASH.Program off
;
; @Chip: RM48*
; @Author: WRD
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Rev: 10516 $
; $Id: rm48.cmm 10516 2022-02-02 11:39:30Z bschroefel $
;
; ------------------------------------------------------------------------------
; Setup script configuration. If auto ECC generation is disabled then
; flash sectors are programmed without generating ECC. ECC sectors can be
; programmed separately or ECC sector programming can be omitted.
LOCAL &parameters
ENTRY %LINE &parameters
LOCAL &param_prepareonly &param_cpu &AutoECCGeneration &param_dualport
&param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
&param_cpu=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"CPU=","")
&AutoECCGeneration=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"AUTOECC=","1")
&param_dualport=0
IF VERSION.BUILD.BASE()>=43441.
&param_dualport=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"DUALPORT=","0")
; ------------------------------------------------------------------------------
; Setup CPU
IF (SYStem.MODE()<5)
(
SYStem.RESet
MAP.RESet
IF "&param_cpu"!=""
SYStem.CPU &param_cpu
IF !CPUIS(RM48*)
(
IF VERSION.BUILD()>=37389.
SYStem.CPU RM48*
ELSE
SYStem.CPU RM48L950
)
SYStem.Option.ResBreak OFF
IF CPUIS(RM48*ZWT)
ETM.OFF
SYStem.Up
; Clear SRAM to prevent ECC faults
Data.Set 0xFFFFFF5C %Long 0x00000005
Data.Set 0xFFFFFF5C %Long 0x0000000A
Data.Set 0xFFFFFF60 %Long 0x00000001 ; init L2 SRAM only
Data.Set 0xFFFFFF5C %Long 0x00000005
)
; ------------------------------------------------------------------------------
; Flash declaration
FLASH.RESet
GOSUB FlashDeclaration
; Flash script ends here if called with parameter PREPAREONLY
IF &param_prepareonly
ENDDO PREPAREDONE
; ------------------------------------------------------------------------------
; Flash programming example
DIALOG.YESNO "Program flash memory?"
LOCAL &progflash
ENTRY &progflash
IF &progflash
(
; Disable memory protection unit (MPU) for case internal SRAM is
; protected against code execution
LOCAL &MPU
&MPU=Data.Long(EC15:0x1)
Data.Set EC15:0x1 %Long &MPU&0xFFFFFFFE
; Disable ECC for flash programming
LOCAL &PMNC &ACTLR
&PMNC=Data.Long(C15:0x0C9)
&ACTLR=Data.Long(C15:0x101)
Data.Set C15:0x0C9 %Long &PMNC&~0x10 ; PMNC:X
Data.Set C15:0x101 %Long &ACTLR&~0x0E000000 ; ACTLR:ATCMPCEN, B0TCMPCEN, B1TCMPCEN
FLASH.ReProgram.ALL /Erase
Data.LOAD.auto *
FLASH.ReProgram.off
; Restore MPU and ECC setup
Data.Set C15:0x0C9 %Long &PMNC
Data.Set C15:0x101 %Long &ACTLR
Data.Set EC15:0x1 %Long &MPU
)
ENDDO
; --------------------------------------------------------------------------------
; Flash declaration depending on selected CPU
FlashDeclaration:
IF VERSION.BUILD()<45210.
(
DO ~~~~/rm48simpledecl AUTOECC=&AutoECCGeneration DUALPORT=&param_dualport
RETURN
)
LOCAL &FlashSize
IF CPUIS(RM48L9*)
&FlashSize=0x300000
ELSE
&FlashSize=0x200000
IF &AutoECCGeneration!=0
(
; Program flash
FLASH.Create 1. 0x00000000--0x0001FFFF 0x8000 TARGET Byte 0. /INFO "Bank 0"
FLASH.Create 1. 0x00020000--0x0017FFFF 0x20000 TARGET Byte 0. /INFO "Bank 0"
FLASH.Create 2. 0x00180000--0x001FFFFF 0x20000 TARGET Byte 1. /INFO "Bank 1"
IF &FlashSize>=0x300000
FLASH.Create 2. 0x00200000--0x002FFFFF 0x20000 TARGET Byte 1. /INFO "Bank 1"
; Program flash ECC
FLASH.Create 1. 0xF0400000--0xF0403FFF 0x1000 NOP Byte 0. /INFO "Bank 0 ECC"
FLASH.Create 1. 0xF0404000--0xF042FFFF 0x4000 NOP Byte 0. /INFO "Bank 0 ECC"
FLASH.Create 2. 0xF0430000--0xF043FFFF 0x4000 NOP Byte 1. /INFO "Bank 1 ECC"
IF &FlashSize>=0x300000
FLASH.Create 2. 0xF0440000--0xF045FFFF 0x4000 NOP Byte 1. /INFO "Bank 1 ECC"
; EEPROM emulation flash
FLASH.Create 8. 0xF0200000--0xF020FFFF 0x4000 TARGET Byte 7. /INFO "EEPROM Bank"
; EEPROM emulation flash ECC
FLASH.Create 8. 0xF0100000--0xF0101FFF 0x800 NOP Byte 7. /INFO "EEPROM Bank-ECC"
IF VERSION.BUILD()>=41634.
(
; OTP flash
FLASH.Create 11. 0xF0000000--0xF0000FFF 0x1000 TARGET Quad 0. /OTP /INFO "Customer OTP, Bank 0"
FLASH.Create 12. 0xF0002000--0xF0002FFF 0x1000 TARGET Quad 1. /OTP /INFO "Customer OTP, Bank 1"
FLASH.Create 18. 0xF000E000--0xF000EFFF 0x1000 TARGET Quad 7. /OTP /INFO "Customer OTP, EEPROM Bank"
; OTP flash ECC
FLASH.Create 11. 0xF0040000--0xF00401FF 0x200 NOP Byte 0. /OTP /INFO "Customer OTP-ECC, Bank 0"
FLASH.Create 12. 0xF0040400--0xF00405FF 0x200 NOP Byte 1. /OTP /INFO "Customer OTP-ECC, Bank 1"
FLASH.Create 18. 0xF0041C00--0xF0041DFF 0x200 NOP Byte 7. /OTP /INFO "Customer OTP-ECC, EEPROM Bank"
)
IF &param_dualport==0
FLASH.TARGET 0x08000000 0x08001000 0x4000 ~~/demo/arm/flash/byte/f021r4.bin
ELSE
FLASH.TARGET 0x08000000 EAHB:0x08001000 0x4000 ~~/demo/arm/flash/byte/f021r4.bin /DualPort
)
ELSE
(
; Program flash
FLASH.Create 1. 0x00000000--0x0001FFFF 0x8000 TARGET Byte 0. /EraseALIAS 0xF0400000--0xF0403FFF /INFO "Bank 0"
FLASH.Create 1. 0x00020000--0x0017FFFF 0x20000 TARGET Byte 0. /EraseALIAS 0xF0404000--0xF042FFFF /INFO "Bank 0"
FLASH.Create 2. 0x00180000--0x001FFFFF 0x20000 TARGET Byte 1. /EraseALIAS 0xF0430000--0xF043FFFF /INFO "Bank 1"
IF &FlashSize>=0x300000
FLASH.Create 2. 0x00200000--0x002FFFFF 0x20000 TARGET Byte 1. /EraseALIAS 0xF0440000--0xF045FFFF /INFO "Bank 1"
; Program flash ECC
FLASH.Create 1. 0xF0400000--0xF0403FFF 0x1000 TARGET Byte 0. /EraseALIAS 0x00000000--0x0001FFFF /INFO "Bank 0 ECC"
FLASH.Create 1. 0xF0404000--0xF042FFFF 0x4000 TARGET Byte 0. /EraseALIAS 0x00020000--0x0017FFFF /INFO "Bank 0 ECC"
FLASH.Create 2. 0xF0430000--0xF043FFFF 0x4000 TARGET Byte 1. /EraseALIAS 0x00180000--0x001FFFFF /INFO "Bank 1 ECC"
IF &FlashSize>=0x300000
FLASH.Create 2. 0xF0440000--0xF045FFFF 0x4000 TARGET Byte 1. /EraseALIAS 0x00200000--0x002FFFFF /INFO "Bank 1 ECC"
; EEPROM emulation flash
FLASH.Create 8. 0xF0200000--0xF020FFFF 0x4000 TARGET Byte 7. /EraseALIAS 0xF0100000--0xF0101FFF /INFO "EEPROM Bank"
; EEPROM emulation flash ECC
FLASH.Create 8. 0xF0100000--0xF0101FFF 0x800 TARGET Byte 7. /EraseALIAS 0xF0200000--0xF020FFFF /INFO "EEPROM Bank-ECC"
IF VERSION.BUILD()>=41634.
(
; OTP flash
FLASH.Create 11. 0xF0000000--0xF0000FFF 0x1000 TARGET Quad 0. /OTP /INFO "Customer OTP, Bank 0"
FLASH.Create 12. 0xF0002000--0xF0002FFF 0x1000 TARGET Quad 1. /OTP /INFO "Customer OTP, Bank 1"
FLASH.Create 18. 0xF000E000--0xF000EFFF 0x1000 TARGET Quad 7. /OTP /INFO "Customer OTP, EEPROM Bank"
; OTP flash ECC
FLASH.Create 11. 0xF0040000--0xF00401FF 0x200 TARGET Byte 0. /OTP /INFO "Customer OTP-ECC, Bank 0"
FLASH.Create 12. 0xF0040400--0xF00405FF 0x200 TARGET Byte 1. /OTP /INFO "Customer OTP-ECC, Bank 1"
FLASH.Create 18. 0xF0041C00--0xF0041DFF 0x200 TARGET Byte 7. /OTP /INFO "Customer OTP-ECC, EEPROM Bank"
)
IF &param_dualport==0
FLASH.TARGET 0x08000000 0x08001000 0x4000 ~~/demo/arm/flash/byte/f021r4noecc.bin
ELSE
FLASH.TARGET 0x08000000 EAHB:0x08001000 0x4000 ~~/demo/arm/flash/byte/f021r4noecc.bin /DualPort
)
FLASH.CreateALIAS 0x20000000--0x202FFFFF 0x0
FLASH.CLocK.AUTO
MAP.BUS16 0xF0100000--0xF013FFFF
MAP.BUS16 0xF0400000--0xF04FFFFF
RETURN
Reference in New Issue View Git Blame Copy Permalink