13151 lines
1.0 MiB
13151 lines
1.0 MiB
; --------------------------------------------------------------------------------
|
|
; @Title: MAX32630 On-Chip Peripherals
|
|
; @Props: Released
|
|
; @Author: KST, STR
|
|
; @Changelog: 2017-02-11 KST
|
|
; 2017-07-26 STR
|
|
; @Manufacturer: MAXIM - Maxim Integrated Products, Inc.
|
|
; @Doc: MAX32630A_User_Guide_rev_1_10_june1_2016.pdf (Rev. 1.10, 2016-06)
|
|
; MAX32630-MAX32631.pdf (Rev. 0, 2016-03)
|
|
; @Core: Cortex-M4F
|
|
; @Chip: MAX32630, MAX32631
|
|
; @Copyright: (C) 1989-2017 Lauterbach GmbH, licensed for use with TRACE32(R) only
|
|
; --------------------------------------------------------------------------------
|
|
; $Id: permax32630.per 17736 2024-04-08 09:26:07Z kwisniewski $
|
|
|
|
;
|
|
; Known problems
|
|
; --------------------------------------------------------------------------------
|
|
; Module Register Description
|
|
; PWRSEQ PWRSEQ_FLAGS bits 12-15, table contradicts description below
|
|
; PWRSEQ PWRSEQ_RTC_CTRL2 no description of each bit, only "TBD"
|
|
; IOMAN IOMAN_ALI_ACK2 number of bits contradicts number of pins in P7
|
|
; USB USB_EP no offsets and descriptions of endpoint control registers 1-7
|
|
; AES AES_CTRL bits 4 to 0 are depending on AES Busy, but there is no AES Busy bit
|
|
; USB no known address for USB_EB1-7 registers
|
|
tree.close "Core Registers (Cortex-M4F)"
|
|
AUTOINDENT.PUSH
|
|
AUTOINDENT.OFF
|
|
tree "System Control"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 12.
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "ACTLR,Auxiliary Control Register"
|
|
bitfld.long 0x00 9. " DISFPCA ,Disables lazy stacking of floating point context" "No,Yes"
|
|
bitfld.long 0x00 8. " DISOOFP ,Disables floating point instructions completing" "No,Yes"
|
|
bitfld.long 0x00 2. " DISFOLD ,Disables folding of IT instructions" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 1. " DISDEFWBUF ,Disables write buffer use during default memory map accesses" "No,Yes"
|
|
bitfld.long 0x00 0. " DISMCYCINT ,Disables interruption of multi-cycle instructions" "No,Yes"
|
|
group.long 0x10++0x0B
|
|
line.long 0x00 "SYST_CSR,SysTick Control and Status Register"
|
|
rbitfld.long 0x00 16. " COUNTFLAG ,Counter Flag" "Not counted,Counted"
|
|
bitfld.long 0x00 2. " CLKSOURCE ,SysTick clock source" "External,Core"
|
|
bitfld.long 0x00 1. " TICKINT ,SysTick Handler" "No SysTick,SysTick"
|
|
textline " "
|
|
bitfld.long 0x00 0. " ENABLE ,Counter Enable" "Disabled,Enabled"
|
|
line.long 0x04 "SYST_RVR,SysTick Reload Value Register"
|
|
hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD ,The value to load into the SYST_CVR when the counter reaches 0"
|
|
line.long 0x08 "SYST_CVR,SysTick Current Value Register"
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "SYST_CALIB,SysTick Calibration Value Register"
|
|
bitfld.long 0x00 31. " NOREF ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented"
|
|
bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact"
|
|
hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing"
|
|
rgroup.long 0xD00++0x03
|
|
line.long 0x00 "CPUID,CPU ID Base Register"
|
|
hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER ,Implementer Code"
|
|
bitfld.long 0x00 20.--23. " VARIANT ,Indicates processor revision" "Revision 0,?..."
|
|
bitfld.long 0x00 16.--19. " ARCHITECTURE ,Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
hexmask.long.word 0x00 4.--15. 1. " PARTNO ,Indicates part number"
|
|
bitfld.long 0x00 0.--3. " REVISION ,Indicates patch release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group.long 0xD04++0x23
|
|
line.long 0x00 "ICSR,Interrupt Control State Register"
|
|
bitfld.long 0x00 31. " NMIPENDSET ,Set Pending NMI Bit" "Inactive,Active"
|
|
bitfld.long 0x00 28. " PENDSVSET ,Set Pending pendSV Bit" "Not pending,Pending"
|
|
bitfld.long 0x00 27. " PENDSVCLR ,Removes the pending status of the PendSV exception" "No effect,Removed"
|
|
textline " "
|
|
bitfld.long 0x00 26. " PENDSTSET ,Set Pending SysTick Bit" "Not pending,Pending"
|
|
bitfld.long 0x00 25. " PENDSTCLR ,Clear Pending SysTick Bit" "No effect,Removed"
|
|
bitfld.long 0x00 23. " ISRPREEMPT ,Use Only at Debug Time" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 22. " ISRPENDING ,Indicates whether an external interrupt" "Not pending,Pending"
|
|
hexmask.long.word 0x00 12.--20. 1. " VECTPENDING ,Pending ISR Number Field"
|
|
bitfld.long 0x00 11. " RETTOBASE ,Interrupt Exception" "Active,Not active"
|
|
textline " "
|
|
hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE ,The exception number of the current executing exception"
|
|
line.long 0x04 "VTOR,Vector Table Offset Register"
|
|
hexmask.long 0x04 7.--31. 0x80 " TBLOFF ,Vector table address"
|
|
line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register"
|
|
hexmask.long.word 0x08 16.--31. 1. " VECTKEY ,Register Key"
|
|
rbitfld.long 0x08 15. " ENDIANESS ,Data endianness Bit" "Little,Big"
|
|
bitfld.long 0x08 8.--10. " PRIGROUP ,Interrupt Priority Grouping Field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]"
|
|
textline " "
|
|
bitfld.long 0x08 2. " SYSRESETREQ ,System Reset Request" "Not requested,Requested"
|
|
bitfld.long 0x08 1. " VECTCLRACTIVE ,Clear Active Vector Bit" "No effect,Clear"
|
|
bitfld.long 0x08 0. " VECTRESET ,System Reset" "No effect,Reset"
|
|
line.long 0x0C "SCR,System Control Register"
|
|
bitfld.long 0x0C 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup"
|
|
bitfld.long 0x0C 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep"
|
|
bitfld.long 0x0C 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled"
|
|
line.long 0x10 "CCR,Configuration Control Register"
|
|
bitfld.long 0x10 18. " BP ,Branch prediction enable bit" "Disabled,Enabled"
|
|
bitfld.long 0x10 17. " IC ,Instruction cache enable bit" "Disabled,Enabled"
|
|
bitfld.long 0x10 16. " DC ,Cache enable bit" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 9. " STKALIGN ,8-byte Stack Frame Alignment" "4-byte/no adjustment,8-byte/adjustment"
|
|
bitfld.long 0x10 8. " BFHFNMIGN ,Enable NMI and Hard Fault and FAULTMASK to Ignore Bus Fault" "Disabled,Enabled"
|
|
bitfld.long 0x10 4. " DIV_0_TRP ,Trap Divide by Zero" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 3. " UNALIGN_TRP ,Trap for Unaligned Access" "Disabled,Enabled"
|
|
bitfld.long 0x10 1. " USERSETMPEND ,Controls whether unprivileged software can access the STIR" "Denied,Allowed"
|
|
bitfld.long 0x10 0. " NONEBASETHRDENA ,Control Entry to Thread Mode" "Only from last exception,Any level"
|
|
line.long 0x14 "SHPR1,SSystem Handler Priority Register 1"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_7 ,Priority of System Handler 7"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_6 ,Priority of system handler 6(UsageFault)"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_5 ,Priority of system handler 5(BusFault)"
|
|
textline " "
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_4 ,Priority of system handler 4(MemManage)"
|
|
line.long 0x18 "SHPR2,System Handler Priority Register 2"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_11 ,Priority of system handler 11(SVCall)"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_10 ,Priority of System Handler 10"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_9 ,Priority of System Handler 9"
|
|
textline " "
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_8 ,Priority of System Handler 8"
|
|
line.long 0x1C "SHPR3,System Handler Priority Register 3"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_15 ,Priority of System Handler 15(SysTick)"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_14 ,Priority of System Handler 14(PendSV)"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_13 ,Priority of System Handler 13"
|
|
textline " "
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_12 ,Priority of System Handler 12(DebugMonitor)"
|
|
line.long 0x20 "SHCSR,System Handler Control and State Register"
|
|
bitfld.long 0x20 18. " USGFAULTENA ,Enable UsageFault" "Disabled,Enabled"
|
|
bitfld.long 0x20 17. " BUSFAULTENA ,Enable BusFault" "Disabled,Enabled"
|
|
bitfld.long 0x20 16. " MEMFAULTENA ,Enable MemManage fault" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 15. " SVCALLPENDED ,SVCall is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 14. " BUSFAULTPENDED ,BusFault is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 13. " MEMFAULTPENDED ,MemManage is pending" "Not pending,Pending"
|
|
textline " "
|
|
bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault is pending" "Not pending,Pending"
|
|
bitfld.long 0x20 11. " SYSTICKACT ,SysTick is Active" "Not active,Active"
|
|
bitfld.long 0x20 10. " PENDSVACT ,PendSV is Active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x20 8. " MONITORACT ,Monitor is Active" "Not active,Active"
|
|
bitfld.long 0x20 7. " SVCALLACT ,SVCall is Active" "Not active,Active"
|
|
bitfld.long 0x20 3. " USGFAULTACT ,UsageFault is Active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x20 1. " BUSFAULTACT ,BusFault is Active" "Not active,Active"
|
|
bitfld.long 0x20 0. " MEMFAULTACT ,MemManage is Active" "Not active,Active"
|
|
group.byte 0xD28++0x1
|
|
line.byte 0x00 "MMFSR,MemManage Status Register"
|
|
bitfld.byte 0x00 7. " MMARVALID ,Address Valid Flag" "Not valid,Valid"
|
|
bitfld.byte 0x00 5. " MLSPERR ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 4. " MSTKERR ,tacking Access Violations" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x00 3. " MUNSTKERR ,Unstack Access Violations" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 1. " DACCVIOL ,Data Access Violation" "Not occurred,Occurred"
|
|
bitfld.byte 0x00 0. " IACCVIOL ,Instruction Access Violation" "Not occurred,Occurred"
|
|
line.byte 0x01 "BFSR,Bus Fault Status Register"
|
|
bitfld.byte 0x01 7. " BFARVALID ,Address Valid Flag" "Not valid,Valid"
|
|
bitfld.byte 0x01 5. " LSPERR ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 4. " STKERR ,Derived bus fault(exception entry)" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x01 3. " UNSTKERR ,Derived bus fault(exception return)" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 2. " IMPRECISERR ,Imprecise data access error" "Not occurred,Occurred"
|
|
bitfld.byte 0x01 1. " PRECISERR ,Precise data access error" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.byte 0x01 0. " IBUSERR ,Bus fault on an instruction prefetch" "Not occurred,Occurred"
|
|
group.word 0xD2A++0x1
|
|
line.word 0x00 "USAFAULT,Usage Fault Status Register"
|
|
bitfld.word 0x00 9. " DIVBYZERO ,Divide by zero error" "No error,Error"
|
|
bitfld.word 0x00 8. " UNALIGNED ,Unaligned access error" "No error,Error"
|
|
bitfld.word 0x00 3. " NOCP ,A coprocessor access error" "No error,Error"
|
|
textline " "
|
|
bitfld.word 0x00 2. " INVPC ,An integrity check error" "No error,Error"
|
|
bitfld.word 0x00 1. " INVSTATE ,Invalid Combination of EPSR and Instruction" "No error,Error"
|
|
bitfld.word 0x00 0. " UNDEFINSTR ,Undefined instruction error" "No error,Error"
|
|
group.long 0xD2C++0x07
|
|
line.long 0x00 "HFSR,Hard Fault Status Register"
|
|
bitfld.long 0x00 31. " DEBUGEVT ,Indicates when a Debug event has occurred" "Not occurred,Occurred"
|
|
bitfld.long 0x00 30. " FORCED ,Indicates that a fault with configurable priority" "Not occurred,Occurred"
|
|
bitfld.long 0x00 1. " VECTTBL ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred"
|
|
line.long 0x04 "DFSR,Debug Fault Status Register"
|
|
bitfld.long 0x04 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of EDBGRQ" "Not asserted,Asserted"
|
|
bitfld.long 0x04 3. " VCATCH ,Vector Catch Flag" "Not occurred,Occurred"
|
|
bitfld.long 0x04 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not occurred,Occurred"
|
|
textline " "
|
|
bitfld.long 0x04 1. " BKPT ,BKPT Flag" "Not executed,Executed"
|
|
bitfld.long 0x04 0. " HALTED ,Indicates a debug event generated by either" "Not requested,Requested"
|
|
group.long 0xD34++0x0B
|
|
line.long 0x00 "MMFAR,MemManage Fault Address Register"
|
|
line.long 0x04 "BFAR,BusFault Address Register"
|
|
line.long 0x08 "AFSR,Auxiliary Fault Status Register"
|
|
group.long 0xD88++0x03
|
|
line.long 0x00 "CPACR,Coprocessor Access Control Register"
|
|
bitfld.long 0x00 22.--23. " CP11 ,Access privileges for coprocessor 11" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 20.--21. " CP10 ,Access privileges for coprocessor 10" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 14.--15. " CP7 ,Access privileges for coprocessor 7" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " CP6 ,Access privileges for coprocessor 6" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 10.--11. " CP5 ,Access privileges for coprocessor 5" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 8.--9. " CP4 ,Access privileges for coprocessor 4" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 6.--7. " CP3 ,Access privileges for coprocessor 3" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 4.--5. " CP2 ,Access privileges for coprocessor 2" "Access denied,Privileged only,Reserved,Full access"
|
|
bitfld.long 0x00 2.--3. " CP1 ,Access privileges for coprocessor 1" "Access denied,Privileged only,Reserved,Full access"
|
|
textline " "
|
|
bitfld.long 0x00 0.--1. " CP0 ,Access privileges for coprocessor 0" "Access denied,Privileged only,Reserved,Full access"
|
|
wgroup.long 0xF00++0x03
|
|
line.long 0x00 "STIR,Software Trigger Interrupt Register"
|
|
hexmask.long.word 0x00 0.--8. 1. " INTID ,Indicates the interrupt to be triggered"
|
|
width 10.
|
|
tree "Feature Registers"
|
|
rgroup.long 0xD40++0x0B
|
|
line.long 0x00 "ID_PFR0,Processor Feature Register 0"
|
|
bitfld.long 0x00 4.--7. " STATE1 ,Thumb instruction set support" ",,,Supported,?..."
|
|
bitfld.long 0x00 0.--3. " STATE0 ,ARM instruction set support" "Not supported,?..."
|
|
line.long 0x04 "ID_PFR1,Processor Feature Register 1"
|
|
bitfld.long 0x04 8.--11. " MPROF ,M profile programmers' model" ",,2-stack,?..."
|
|
line.long 0x08 "ID_DFR0,Debug Feature Register 0"
|
|
bitfld.long 0x08 20.--23. " DBGMOD ,Support for memory-mapped debug model for M profile processors" "Not supported,Supported,?..."
|
|
hgroup.long 0xD4C++0x03
|
|
hide.long 0x00 "ID_AFR0,Auxiliary Feature Register 0"
|
|
rgroup.long 0xD50++0x03
|
|
line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0"
|
|
bitfld.long 0x00 20.--23. " AUXREG ,Indicates the support for Auxiliary registers" "Not supported,ACTLR only,?..."
|
|
bitfld.long 0x00 16.--19. " TCMSUP ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..."
|
|
bitfld.long 0x00 12.--15. " SHRLEV ,Indicates the number of shareability levels implemented" "Level 1,?..."
|
|
textline " "
|
|
bitfld.long 0x00 8.--11. " OUTMSHR ,Indicates the outermost shareability domain implemented" "Non-cacheable,,,,,,,,,,,,,,,Ignored"
|
|
bitfld.long 0x00 4.--7. " PMSASUP ,Indicates support for a PMSA" "Not supported,,,PMSAv7,?..."
|
|
hgroup.long 0xD54++0x03
|
|
hide.long 0x00 "ID_MMFR1,Memory Model Feature Register 1"
|
|
rgroup.long 0xD58++0x03
|
|
line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2"
|
|
bitfld.long 0x00 24.--27. " WFISTALL ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..."
|
|
rgroup.long 0xD60++0x13
|
|
line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0"
|
|
bitfld.long 0x00 24.--27. " DIVIDE ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..."
|
|
bitfld.long 0x00 20.--23. " DEBUG ,Indicates the supported debug instructions" "Not supported,BKPT,?..."
|
|
bitfld.long 0x00 16.--19. " COPROC ,Indicates the supported coprocessor instructions" "Not supported,CDP/LDC/MCR/STC,CDP2/LDC2/MCR2/STC2,MCRR/MRRC,MCRR2/MRRC2,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..."
|
|
bitfld.long 0x00 8.--11. " BITFIELD ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..."
|
|
bitfld.long 0x00 4.--7. " BITCOUNT ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..."
|
|
line.long 0x04 "ID_ISAR1,Instruction Set Attributes Register 1"
|
|
bitfld.long 0x04 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..."
|
|
bitfld.long 0x04 20.--23. " IMMEDIATE ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..."
|
|
bitfld.long 0x04 16.--19. " IFTHEN ,Indicates the supported IfThen instructions" "Not supported,IT,?..."
|
|
textline " "
|
|
bitfld.long 0x04 12.--15. " EXTEND ,Indicates the supported Extend instructions" "Not supported,Supported,Supported,?..."
|
|
line.long 0x08 "ID_ISAR2,Instruction Set Attributes Register 2"
|
|
bitfld.long 0x08 24.--27. " REVERSAL ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..."
|
|
bitfld.long 0x08 20.--23. " MULTU ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..."
|
|
bitfld.long 0x08 16.--19. " MULTS ,Indicates the supported advanced signed multiply instructions" "Not supported,Supported,Supported,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x08 12.--15. " MULT ,Indicates the supported additional multiply instructions" "Not supported,MLA,MLA/MLS,?..."
|
|
bitfld.long 0x08 8.--11. " MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..."
|
|
bitfld.long 0x08 4.--7. " MEMHINT ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..."
|
|
textline " "
|
|
bitfld.long 0x08 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,LDRD/STRD,?..."
|
|
line.long 0x0C "ID_ISAR3,Instruction Set Attributes Register 3"
|
|
bitfld.long 0x0C 24.--27. " TRUENOP ,Indicates the support for a true NOP instruction" "Not supported,Supported,?..."
|
|
bitfld.long 0x0C 20.--23. " THUMBCOPY ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..."
|
|
bitfld.long 0x0C 16.--19. " TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,Supported,Supported,?..."
|
|
bitfld.long 0x0C 8.--11. " SVC ,Indicates the supported SVC instructions" "Not supported,SVC,?..."
|
|
bitfld.long 0x0C 4.--7. " SIMD ,Indicates the supported SIMD instructions" "Not supported,Supported,,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 0.--3. " SATURATE ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB,?..."
|
|
line.long 0x10 "ID_ISAR4,Instruction Set Attributes Register 4"
|
|
bitfld.long 0x10 24.--27. " PSR_M ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,?..."
|
|
bitfld.long 0x10 20.--23. " SYNCHPRIMFRAC ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,Supported,Supported,?..."
|
|
bitfld.long 0x10 16.--19. " BARRIER ,Indicates the supported Barrier instructions" "Not supported,DMB/DSB/ISB,?..."
|
|
textline " "
|
|
bitfld.long 0x10 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..."
|
|
bitfld.long 0x10 4.--7. " WITHSHIFTS ,Indicates the support for instructions with shifts" "MOV/shift,Shift LSL 0-3,,Shift other,?..."
|
|
bitfld.long 0x10 0.--3. " UNPRIV ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,LDRBT/LDRT/STRBT/STRT/LDRHT/LDRSBT/LDRSHTSTRHT,?..."
|
|
tree.end
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0C "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0C "CID3,Component ID3"
|
|
tree.end
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Memory Protection Unit"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 15.
|
|
rgroup.long 0xD90++0x03
|
|
line.long 0x00 "MPU_TYPE,MPU Type Register"
|
|
bitfld.long 0x00 16.--23. " IREGION ,Instruction region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
|
|
bitfld.long 0x00 8.--15. " DREGION ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..."
|
|
bitfld.long 0x00 0. " SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,Supported"
|
|
group.long 0xD94++0x03
|
|
line.long 0x00 "MPU_CTRL,MPU Control Register"
|
|
bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " HFNMIENA ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables the MPU" "Disabled,Enabled"
|
|
group.long 0xD98++0x03
|
|
line.long 0x00 "MPU_RNR,MPU Region Number Register"
|
|
hexmask.long.byte 0x00 0.--7. 1. " REGION ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR"
|
|
tree.close "MPU regions"
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0
|
|
group.long 0xD9C++0x03 "Region 0"
|
|
saveout 0xD98 %l 0x0
|
|
line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x0
|
|
line.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 0 (not implemented)"
|
|
saveout 0xD98 %l 0x0
|
|
hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x0
|
|
hide.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1
|
|
group.long 0xD9C++0x03 "Region 1"
|
|
saveout 0xD98 %l 0x1
|
|
line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x1
|
|
line.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 1 (not implemented)"
|
|
saveout 0xD98 %l 0x1
|
|
hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x1
|
|
hide.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2
|
|
group.long 0xD9C++0x03 "Region 2"
|
|
saveout 0xD98 %l 0x2
|
|
line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x2
|
|
line.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 2 (not implemented)"
|
|
saveout 0xD98 %l 0x2
|
|
hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x2
|
|
hide.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3
|
|
group.long 0xD9C++0x03 "Region 3"
|
|
saveout 0xD98 %l 0x3
|
|
line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x3
|
|
line.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 3 (not implemented)"
|
|
saveout 0xD98 %l 0x3
|
|
hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x3
|
|
hide.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4
|
|
group.long 0xD9C++0x03 "Region 4"
|
|
saveout 0xD98 %l 0x4
|
|
line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x4
|
|
line.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 4 (not implemented)"
|
|
saveout 0xD98 %l 0x4
|
|
hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x4
|
|
hide.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5
|
|
group.long 0xD9C++0x03 "Region 5"
|
|
saveout 0xD98 %l 0x5
|
|
line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x5
|
|
line.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 5 (not implemented)"
|
|
saveout 0xD98 %l 0x5
|
|
hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x5
|
|
hide.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6
|
|
group.long 0xD9C++0x03 "Region 6"
|
|
saveout 0xD98 %l 0x6
|
|
line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x6
|
|
line.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 6 (not implemented)"
|
|
saveout 0xD98 %l 0x6
|
|
hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x6
|
|
hide.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7
|
|
group.long 0xD9C++0x03 "Region 7"
|
|
saveout 0xD98 %l 0x7
|
|
line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x7
|
|
line.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 7 (not implemented)"
|
|
saveout 0xD98 %l 0x7
|
|
hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x7
|
|
hide.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8
|
|
group.long 0xD9C++0x03 "Region 8"
|
|
saveout 0xD98 %l 0x8
|
|
line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x8
|
|
line.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 8 (not implemented)"
|
|
saveout 0xD98 %l 0x8
|
|
hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x8
|
|
hide.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9
|
|
group.long 0xD9C++0x03 "Region 9"
|
|
saveout 0xD98 %l 0x9
|
|
line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x9
|
|
line.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 9 (not implemented)"
|
|
saveout 0xD98 %l 0x9
|
|
hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0x9
|
|
hide.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA
|
|
group.long 0xD9C++0x03 "Region 10"
|
|
saveout 0xD98 %l 0xA
|
|
line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xA
|
|
line.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 10 (not implemented)"
|
|
saveout 0xD98 %l 0xA
|
|
hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xA
|
|
hide.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB
|
|
group.long 0xD9C++0x03 "Region 11"
|
|
saveout 0xD98 %l 0xB
|
|
line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xB
|
|
line.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 11 (not implemented)"
|
|
saveout 0xD98 %l 0xB
|
|
hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xB
|
|
hide.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC
|
|
group.long 0xD9C++0x03 "Region 12"
|
|
saveout 0xD98 %l 0xC
|
|
line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xC
|
|
line.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 12 (not implemented)"
|
|
saveout 0xD98 %l 0xC
|
|
hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xC
|
|
hide.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD
|
|
group.long 0xD9C++0x03 "Region 13"
|
|
saveout 0xD98 %l 0xD
|
|
line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xD
|
|
line.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 13 (not implemented)"
|
|
saveout 0xD98 %l 0xD
|
|
hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xD
|
|
hide.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE
|
|
group.long 0xD9C++0x03 "Region 14"
|
|
saveout 0xD98 %l 0xE
|
|
line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xE
|
|
line.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 14 (not implemented)"
|
|
saveout 0xD98 %l 0xE
|
|
hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xE
|
|
hide.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF
|
|
group.long 0xD9C++0x03 "Region 15"
|
|
saveout 0xD98 %l 0xF
|
|
line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
|
|
hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region"
|
|
group.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xF
|
|
line.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
|
|
bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute"
|
|
bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-"
|
|
bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable"
|
|
bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable"
|
|
bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable"
|
|
textline " "
|
|
bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1"
|
|
bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1"
|
|
bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1"
|
|
bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1"
|
|
bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1"
|
|
bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1"
|
|
bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1"
|
|
bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1"
|
|
bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB"
|
|
bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0xD9C++0x03 "Region 15 (not implemented)"
|
|
saveout 0xD98 %l 0xF
|
|
hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15"
|
|
hgroup.long 0xDA0++0x03
|
|
saveout 0xD98 %l 0xF
|
|
hide.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15"
|
|
textline " "
|
|
textline " "
|
|
endif
|
|
tree.end
|
|
width 0x0b
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Nested Vectored Interrupt Controller"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 6.
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "ICTR,Interrupt Controller Type Register"
|
|
bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,33-64,65-96,97-128,129-160,161-192,193-224,225-240,?..."
|
|
tree "Interrupt Enable Registers"
|
|
width 23.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x100++0x03
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x100++0x7
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x100++0x0B
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x100++0x0F
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x100++0x13
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x100++0x17
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x100++0x1B
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x100++0x1F
|
|
line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
line.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
|
|
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
textline " "
|
|
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled"
|
|
else
|
|
hgroup.long 0x100++0x1F
|
|
hide.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register"
|
|
hide.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Pending Registers"
|
|
width 23.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x200++0x07
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x200++0x0B
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x200++0x0F
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x200++0x13
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x200++0x17
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x200++0x1B
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x200++0x1F
|
|
line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
line.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
|
|
setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
textline " "
|
|
setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending"
|
|
else
|
|
hgroup.long 0x200++0x1F
|
|
hide.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register"
|
|
hide.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Active Bit Registers"
|
|
width 9.
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
rgroup.long 0x300++0x03
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
rgroup.long 0x300++0x07
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
rgroup.long 0x300++0x0B
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
rgroup.long 0x300++0x0F
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
rgroup.long 0x300++0x13
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
rgroup.long 0x300++0x17
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
rgroup.long 0x300++0x1B
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
rgroup.long 0x300++0x1F
|
|
line.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active"
|
|
line.long 0x1c "ACTIVE8,Active Bit Register 8"
|
|
bitfld.long 0x1c 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 14. " ACTIVE238 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 13. " ACTIVE237 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 12. " ACTIVE236 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 11. " ACTIVE235 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 10. " ACTIVE234 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x1c 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 8. " ACTIVE232 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 7. " ACTIVE231 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 6. " ACTIVE230 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 5. " ACTIVE229 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 4. " ACTIVE228 ,Interrupt Active Flag" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x1c 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 2. " ACTIVE226 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 1. " ACTIVE225 ,Interrupt Active Flag" "Not active,Active"
|
|
bitfld.long 0x1c 0. " ACTIVE224 ,Interrupt Active Flag" "Not active,Active"
|
|
else
|
|
hgroup.long 0x300++0x1F
|
|
hide.long 0x00 "ACTIVE1,Active Bit Register 1"
|
|
hide.long 0x04 "ACTIVE2,Active Bit Register 2"
|
|
hide.long 0x08 "ACTIVE3,Active Bit Register 3"
|
|
hide.long 0x0c "ACTIVE4,Active Bit Register 4"
|
|
hide.long 0x10 "ACTIVE5,Active Bit Register 5"
|
|
hide.long 0x14 "ACTIVE6,Active Bit Register 6"
|
|
hide.long 0x18 "ACTIVE7,Active Bit Register 7"
|
|
hide.long 0x1c "ACTIVE8,Active Bit Register 8"
|
|
endif
|
|
tree.end
|
|
tree "Interrupt Priority Registers"
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00)
|
|
group.long 0x400++0x1F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01)
|
|
group.long 0x400++0x3F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02)
|
|
group.long 0x400++0x5F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03)
|
|
group.long 0x400++0x7F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04)
|
|
group.long 0x400++0x9F
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05)
|
|
group.long 0x400++0xBF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06)
|
|
group.long 0x400++0xDF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
line.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
|
|
hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority"
|
|
hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority"
|
|
hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority"
|
|
line.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
|
|
hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority"
|
|
hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority"
|
|
hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority"
|
|
line.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
|
|
hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority"
|
|
hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority"
|
|
hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority"
|
|
line.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
|
|
hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority"
|
|
hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority"
|
|
hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority"
|
|
line.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
|
|
hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority"
|
|
hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority"
|
|
hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority"
|
|
line.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
|
|
hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority"
|
|
hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority"
|
|
hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority"
|
|
line.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
|
|
hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority"
|
|
hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority"
|
|
hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority"
|
|
line.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
|
|
hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority"
|
|
hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority"
|
|
hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07)
|
|
group.long 0x400++0xEF
|
|
line.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority"
|
|
hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority"
|
|
hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority"
|
|
hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority"
|
|
line.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority"
|
|
hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority"
|
|
hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority"
|
|
hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority"
|
|
line.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority"
|
|
hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority"
|
|
hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority"
|
|
hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority"
|
|
line.long 0xC "IPR3,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority"
|
|
hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority"
|
|
hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority"
|
|
hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority"
|
|
line.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority"
|
|
hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority"
|
|
hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority"
|
|
hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority"
|
|
line.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority"
|
|
hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority"
|
|
hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority"
|
|
hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority"
|
|
line.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority"
|
|
hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority"
|
|
hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority"
|
|
hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority"
|
|
line.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority"
|
|
hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority"
|
|
hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority"
|
|
hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority"
|
|
line.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority"
|
|
hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority"
|
|
hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority"
|
|
hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority"
|
|
line.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority"
|
|
hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority"
|
|
hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority"
|
|
hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority"
|
|
line.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority"
|
|
hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority"
|
|
hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority"
|
|
hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority"
|
|
line.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority"
|
|
hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority"
|
|
hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority"
|
|
hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority"
|
|
line.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority"
|
|
hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority"
|
|
hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority"
|
|
hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority"
|
|
line.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority"
|
|
hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority"
|
|
hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority"
|
|
hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority"
|
|
line.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority"
|
|
hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority"
|
|
hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority"
|
|
hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority"
|
|
line.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority"
|
|
hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority"
|
|
hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority"
|
|
hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority"
|
|
line.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority"
|
|
hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority"
|
|
hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority"
|
|
hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority"
|
|
line.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority"
|
|
hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority"
|
|
hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority"
|
|
hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority"
|
|
line.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority"
|
|
hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority"
|
|
hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority"
|
|
hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority"
|
|
line.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority"
|
|
hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority"
|
|
hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority"
|
|
hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority"
|
|
line.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority"
|
|
hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority"
|
|
hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority"
|
|
hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority"
|
|
line.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority"
|
|
hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority"
|
|
hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority"
|
|
hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority"
|
|
line.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority"
|
|
hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority"
|
|
hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority"
|
|
hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority"
|
|
line.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority"
|
|
hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority"
|
|
hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority"
|
|
hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority"
|
|
line.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority"
|
|
hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority"
|
|
hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority"
|
|
hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority"
|
|
line.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority"
|
|
hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority"
|
|
hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority"
|
|
hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority"
|
|
line.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority"
|
|
hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority"
|
|
hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority"
|
|
hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority"
|
|
line.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority"
|
|
hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority"
|
|
hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority"
|
|
hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority"
|
|
line.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority"
|
|
hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority"
|
|
hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority"
|
|
hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority"
|
|
line.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority"
|
|
hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority"
|
|
hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority"
|
|
hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority"
|
|
line.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority"
|
|
hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority"
|
|
hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority"
|
|
hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority"
|
|
line.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority"
|
|
hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority"
|
|
hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority"
|
|
hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority"
|
|
line.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority"
|
|
hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority"
|
|
hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority"
|
|
hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority"
|
|
line.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority"
|
|
hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority"
|
|
hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority"
|
|
hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority"
|
|
line.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority"
|
|
hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority"
|
|
hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority"
|
|
hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority"
|
|
line.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority"
|
|
hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority"
|
|
hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority"
|
|
hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority"
|
|
line.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority"
|
|
hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority"
|
|
hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority"
|
|
hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority"
|
|
line.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority"
|
|
hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority"
|
|
hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority"
|
|
hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority"
|
|
line.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority"
|
|
hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority"
|
|
hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority"
|
|
hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority"
|
|
line.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority"
|
|
hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority"
|
|
hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority"
|
|
hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority"
|
|
line.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority"
|
|
hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority"
|
|
hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority"
|
|
hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority"
|
|
line.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority"
|
|
hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority"
|
|
hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority"
|
|
hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority"
|
|
line.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority"
|
|
hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority"
|
|
hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority"
|
|
hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority"
|
|
line.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority"
|
|
hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority"
|
|
hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority"
|
|
hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority"
|
|
line.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority"
|
|
hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority"
|
|
hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority"
|
|
hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority"
|
|
line.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority"
|
|
hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority"
|
|
hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority"
|
|
hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority"
|
|
line.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority"
|
|
hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority"
|
|
hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority"
|
|
hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority"
|
|
line.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority"
|
|
hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority"
|
|
hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority"
|
|
hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority"
|
|
line.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority"
|
|
hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority"
|
|
hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority"
|
|
hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority"
|
|
line.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority"
|
|
hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority"
|
|
hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority"
|
|
hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority"
|
|
line.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority"
|
|
hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority"
|
|
hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority"
|
|
hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority"
|
|
line.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority"
|
|
hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority"
|
|
hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority"
|
|
hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority"
|
|
line.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority"
|
|
hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority"
|
|
hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority"
|
|
hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority"
|
|
line.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority"
|
|
hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority"
|
|
hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority"
|
|
hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority"
|
|
line.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority"
|
|
hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority"
|
|
hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority"
|
|
hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority"
|
|
line.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority"
|
|
hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority"
|
|
hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority"
|
|
hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority"
|
|
line.long 0xE0 "IPR56,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority"
|
|
hexmask.long.byte 0xE0 16.--23. 1. " PRI_226 ,Interrupt 226 Priority"
|
|
hexmask.long.byte 0xE0 8.--15. 1. " PRI_225 ,Interrupt 225 Priority"
|
|
hexmask.long.byte 0xE0 0.--7. 1. " PRI_224 ,Interrupt 224 Priority"
|
|
line.long 0xE4 "IPR57,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority"
|
|
hexmask.long.byte 0xE4 16.--23. 1. " PRI_230 ,Interrupt 230 Priority"
|
|
hexmask.long.byte 0xE4 8.--15. 1. " PRI_229 ,Interrupt 229 Priority"
|
|
hexmask.long.byte 0xE4 0.--7. 1. " PRI_228 ,Interrupt 228 Priority"
|
|
line.long 0xE8 "IPR58,Interrupt Priority Register"
|
|
hexmask.long.byte 0xE8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority"
|
|
hexmask.long.byte 0xE8 16.--23. 1. " PRI_234 ,Interrupt 234 Priority"
|
|
hexmask.long.byte 0xE8 8.--15. 1. " PRI_233 ,Interrupt 233 Priority"
|
|
hexmask.long.byte 0xE8 0.--7. 1. " PRI_232 ,Interrupt 232 Priority"
|
|
line.long 0xEC "IPR59,Interrupt Priority Register"
|
|
hexmask.long.byte 0xEC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority"
|
|
hexmask.long.byte 0xEC 16.--23. 1. " PRI_238 ,Interrupt 238 Priority"
|
|
hexmask.long.byte 0xEC 8.--15. 1. " PRI_237 ,Interrupt 237 Priority"
|
|
hexmask.long.byte 0xEC 0.--7. 1. " PRI_236 ,Interrupt 236 Priority"
|
|
else
|
|
hgroup.long 0x400++0xEF
|
|
hide.long 0x0 "IPR0,Interrupt Priority Register"
|
|
hide.long 0x4 "IPR1,Interrupt Priority Register"
|
|
hide.long 0x8 "IPR2,Interrupt Priority Register"
|
|
hide.long 0xC "IPR3,Interrupt Priority Register"
|
|
hide.long 0x10 "IPR4,Interrupt Priority Register"
|
|
hide.long 0x14 "IPR5,Interrupt Priority Register"
|
|
hide.long 0x18 "IPR6,Interrupt Priority Register"
|
|
hide.long 0x1C "IPR7,Interrupt Priority Register"
|
|
hide.long 0x20 "IPR8,Interrupt Priority Register"
|
|
hide.long 0x24 "IPR9,Interrupt Priority Register"
|
|
hide.long 0x28 "IPR10,Interrupt Priority Register"
|
|
hide.long 0x2C "IPR11,Interrupt Priority Register"
|
|
hide.long 0x30 "IPR12,Interrupt Priority Register"
|
|
hide.long 0x34 "IPR13,Interrupt Priority Register"
|
|
hide.long 0x38 "IPR14,Interrupt Priority Register"
|
|
hide.long 0x3C "IPR15,Interrupt Priority Register"
|
|
hide.long 0x40 "IPR16,Interrupt Priority Register"
|
|
hide.long 0x44 "IPR17,Interrupt Priority Register"
|
|
hide.long 0x48 "IPR18,Interrupt Priority Register"
|
|
hide.long 0x4C "IPR19,Interrupt Priority Register"
|
|
hide.long 0x50 "IPR20,Interrupt Priority Register"
|
|
hide.long 0x54 "IPR21,Interrupt Priority Register"
|
|
hide.long 0x58 "IPR22,Interrupt Priority Register"
|
|
hide.long 0x5C "IPR23,Interrupt Priority Register"
|
|
hide.long 0x60 "IPR24,Interrupt Priority Register"
|
|
hide.long 0x64 "IPR25,Interrupt Priority Register"
|
|
hide.long 0x68 "IPR26,Interrupt Priority Register"
|
|
hide.long 0x6C "IPR27,Interrupt Priority Register"
|
|
hide.long 0x70 "IPR28,Interrupt Priority Register"
|
|
hide.long 0x74 "IPR29,Interrupt Priority Register"
|
|
hide.long 0x78 "IPR30,Interrupt Priority Register"
|
|
hide.long 0x7C "IPR31,Interrupt Priority Register"
|
|
hide.long 0x80 "IPR32,Interrupt Priority Register"
|
|
hide.long 0x84 "IPR33,Interrupt Priority Register"
|
|
hide.long 0x88 "IPR34,Interrupt Priority Register"
|
|
hide.long 0x8C "IPR35,Interrupt Priority Register"
|
|
hide.long 0x90 "IPR36,Interrupt Priority Register"
|
|
hide.long 0x94 "IPR37,Interrupt Priority Register"
|
|
hide.long 0x98 "IPR38,Interrupt Priority Register"
|
|
hide.long 0x9C "IPR39,Interrupt Priority Register"
|
|
hide.long 0xA0 "IPR40,Interrupt Priority Register"
|
|
hide.long 0xA4 "IPR41,Interrupt Priority Register"
|
|
hide.long 0xA8 "IPR42,Interrupt Priority Register"
|
|
hide.long 0xAC "IPR43,Interrupt Priority Register"
|
|
hide.long 0xB0 "IPR44,Interrupt Priority Register"
|
|
hide.long 0xB4 "IPR45,Interrupt Priority Register"
|
|
hide.long 0xB8 "IPR46,Interrupt Priority Register"
|
|
hide.long 0xBC "IPR47,Interrupt Priority Register"
|
|
hide.long 0xC0 "IPR48,Interrupt Priority Register"
|
|
hide.long 0xC4 "IPR49,Interrupt Priority Register"
|
|
hide.long 0xC8 "IPR50,Interrupt Priority Register"
|
|
hide.long 0xCC "IPR51,Interrupt Priority Register"
|
|
hide.long 0xD0 "IPR52,Interrupt Priority Register"
|
|
hide.long 0xD4 "IPR53,Interrupt Priority Register"
|
|
hide.long 0xD8 "IPR54,Interrupt Priority Register"
|
|
hide.long 0xDC "IPR55,Interrupt Priority Register"
|
|
hide.long 0xE0 "IPR56,Interrupt Priority Register"
|
|
hide.long 0xE4 "IPR57,Interrupt Priority Register"
|
|
hide.long 0xE8 "IPR58,Interrupt Priority Register"
|
|
hide.long 0xEC "IPR59,Interrupt Priority Register"
|
|
endif
|
|
tree.end
|
|
width 0x0b
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
sif CORENAME()=="CORTEXM4F"
|
|
tree "Floating-point Unit (FPU)"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 8.
|
|
group.long 0xF34++0x0B
|
|
line.long 0x00 "FPCCR,Floating-Point Context Control Register"
|
|
bitfld.long 0x00 31. " ASPEN ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " LSPEN ,Enables lazy context save of FP state" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " MONRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able"
|
|
textline " "
|
|
bitfld.long 0x00 6. " BFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able"
|
|
bitfld.long 0x00 5. " MMRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able"
|
|
bitfld.long 0x00 4. " HFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able"
|
|
textline " "
|
|
bitfld.long 0x00 3. " THREAD ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread"
|
|
bitfld.long 0x00 1. " USER ,Indicates the privilege level of the software executing" "Privileged,Unprivileged"
|
|
bitfld.long 0x00 0. " LSPACT ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active"
|
|
line.long 0x04 "FPCAR,Floating-Point Context Address Register"
|
|
hexmask.long 0x04 3.--31. 0x8 " ADDRESS ,The location of the unpopulated floating-point register space allocated on an exception stack frame"
|
|
line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register"
|
|
bitfld.long 0x08 26. " AHP ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative"
|
|
bitfld.long 0x08 25. " DN ,Default value for FPSCR.DN" "NaN operands,Any operation"
|
|
bitfld.long 0x08 24. " FZ ,Default value for FPSCR.FZ" "No Flush mode,Flush mode"
|
|
textline " "
|
|
bitfld.long 0x08 22.--23. " RMODE ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero"
|
|
rgroup.long 0xF40++0x07
|
|
line.long 0x00 "MVFR0,Media and FP Feature Register 0"
|
|
bitfld.long 0x00 28.--31. " FPRNDMOD ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..."
|
|
bitfld.long 0x00 24.--27. " SRTERR ,Indicates the hardware support for FP short vectors" "Not supported,?..."
|
|
bitfld.long 0x00 20.--23. " SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x00 16.--19. " DIV ,Indicates the hardware support for FP divide operations" ",Supported,?..."
|
|
bitfld.long 0x00 12.--15. " FPEXTRP ,Indicates whether the FP hardware implementation supports exception trapping" "Not supported,?..."
|
|
bitfld.long 0x00 8.--11. " DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..."
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " SNGLPREC ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..."
|
|
bitfld.long 0x00 0.--3. " A_SIMD ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..."
|
|
line.long 0x04 "MVFR1,Media and FP Feature Register 1"
|
|
bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..."
|
|
bitfld.long 0x04 24.--27. " FP_HPFP ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..."
|
|
textline " "
|
|
bitfld.long 0x04 4.--7. " D_NAN ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..."
|
|
bitfld.long 0x04 0.--3. " FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Full denorm. num. arit.,?..."
|
|
width 0xB
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
endif
|
|
tree "Debug"
|
|
tree "Core Debug"
|
|
sif COMPonent.AVAILABLE("COREDEBUG")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))
|
|
width 7.
|
|
group.long 0xD30++0x03
|
|
line.long 0x00 "DFSR,Debug Fault Status Register"
|
|
eventfld.long 0x00 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated"
|
|
eventfld.long 0x00 3. " VCATCH ,Indicates triggering of a Vector catch" "Not triggered,Triggered"
|
|
eventfld.long 0x00 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not generated,Generated"
|
|
newline
|
|
eventfld.long 0x00 1. " BKPT ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated"
|
|
eventfld.long 0x00 0. " HALTED ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated"
|
|
newline
|
|
hgroup.long 0xDF0++0x03
|
|
hide.long 0x00 "DHCSR,Debug Halting Control and Status Register"
|
|
in
|
|
newline
|
|
wgroup.long 0xDF4++0x03
|
|
line.long 0x00 "DCRSR,Debug Core Register Selector Register"
|
|
bitfld.long 0x00 16. " REGWNR ,Register Read/Write" "Read,Write"
|
|
hexmask.long.byte 0x00 0.--6. 1. " REGSEL ,Specifies the ARM core register or special-purpose register or Floating-point extension register"
|
|
group.long 0xDF8++0x03
|
|
line.long 0x00 "DCRDR,Debug Core Register Data Register"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000)
|
|
group.long 0xDFC++0x03
|
|
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
|
|
bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1"
|
|
bitfld.long 0x00 18. " MON_STEP ,Setting this bit to 1 makes the step request pending" "No step,Step"
|
|
newline
|
|
bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
|
|
bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
|
|
else
|
|
group.long 0xDFC++0x03
|
|
line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register"
|
|
bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1"
|
|
newline
|
|
bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending"
|
|
bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled"
|
|
newline
|
|
bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "COREDEBUG component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Flash Patch and Breakpoint Unit (FPB)"
|
|
sif COMPonent.AVAILABLE("FPB")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))
|
|
width 10.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "FP_CTRL,Flash Patch Control Register"
|
|
bitfld.long 0x00 28.--31. " REV ,Flash Patch Breakpoint architecture revision" "Version 1,Version 2,?..."
|
|
rbitfld.long 0x00 4.--7. 12.--14. " NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127"
|
|
bitfld.long 0x00 1. " KEY ,Key Field" "Low,High"
|
|
bitfld.long 0x00 0. " ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled"
|
|
textline ""
|
|
line.long 0x04 "FP_REMAP,Flash Patch Remap Register"
|
|
bitfld.long 0x04 29. " RMPSPT ,Indicates whether the FPB unit supports flash patch remap" "Not supported,SRAM region"
|
|
hexmask.long.tbyte 0x04 5.--28. 0x20 " REMAP ,Remap Base Address Field"
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00)
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00)
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00)
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00)
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00)
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00)
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00)
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00)
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both"
|
|
hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address"
|
|
bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled"
|
|
elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000)
|
|
if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00)
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
else
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7"
|
|
hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address"
|
|
bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled"
|
|
endif
|
|
endif
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0c "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0c "CID3,Component ID3"
|
|
tree.end
|
|
width 0xB
|
|
else
|
|
newline
|
|
textline "FPB component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree "Data Watchpoint and Trace Unit (DWT)"
|
|
sif COMPonent.AVAILABLE("DWT")
|
|
base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))
|
|
width 15.
|
|
group.long 0x00++0x1B
|
|
line.long 0x00 "DWT_CTRL,Control Register"
|
|
rbitfld.long 0x00 28.--31. " NUMCOMP ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
rbitfld.long 0x00 27. " NOTRCPKT ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported"
|
|
rbitfld.long 0x00 26. " NOEXTTRIG ,Shows whether the implementation includes external match signals" "Supported,Not supported"
|
|
textline " "
|
|
rbitfld.long 0x00 25. " NOCYCCNT ,Shows whether the implementation supports a cycle counter" "Supported,Not supported"
|
|
rbitfld.long 0x00 24. " NOPRFCNT ,Shows whether the implementation supports the profiling counters" "Supported,Not supported"
|
|
bitfld.long 0x00 22. " CYCEVTENA ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 21. " FOLDEVTENA ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " LSUEVTENA ,Enables generation of the LSU counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 19. " SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 18. " EXCEVTENA ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " CPIEVTENA ,Enables generation of the CPI counter overflow event" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " EXCTRCENA ,Enables generation of exception trace" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 12. " PCSAMPLEENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled"
|
|
bitfld.long 0x00 10.--11. " SYNCTAP ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]"
|
|
bitfld.long 0x00 9. " CYCTAP ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]"
|
|
textline " "
|
|
bitfld.long 0x00 5.--8. " POSTINIT ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 1.--4. " POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 0. " CYCCNTENA ,Enables CYCCNT" "Disabled,Enabled"
|
|
line.long 0x04 "DWT_CYCCNT,Cycle Count Register"
|
|
line.long 0x08 "DWT_CPICNT,CPI Count Register"
|
|
hexmask.long.byte 0x08 0.--7. 1. " CPICNT ,The base CPI counter"
|
|
line.long 0x0c "DWT_EXCCNT,Exception Overhead Count Register"
|
|
hexmask.long.byte 0x0c 0.--7. 1. " EXCCNT ,The exception overhead counter"
|
|
line.long 0x10 "DWT_SLEEPCNT,Sleep Count Register"
|
|
hexmask.long.byte 0x10 0.--7. 1. " SLEEPCNT ,Sleep Counter"
|
|
line.long 0x14 "DWT_LSUCNT,LSU Count Register"
|
|
hexmask.long.byte 0x14 0.--7. 1. " LSUCNT ,Load-store counter"
|
|
line.long 0x18 "DWT_FOLDCNT,Folded-instruction Count Register"
|
|
hexmask.long.byte 0x18 0.--7. 1. " FOLDCNT ,Folded-instruction counter"
|
|
rgroup.long 0x1C++0x03
|
|
line.long 0x00 "DWT_PCSR,Program Counter Sample register"
|
|
textline " "
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "DWT_COMP0,DWT Comparator Register 0"
|
|
line.long 0x04 "DWT_MASK0,DWT Mask Registers 0"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x20)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x00)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x180)==0x80)
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet,UNPREDICTABLE,UNPREDICTABLE,Generate watchpoint debug event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,CMPMATCH[N] event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
else
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x30)++0x07
|
|
line.long 0x00 "DWT_COMP1,DWT Comparator Register 1"
|
|
line.long 0x04 "DWT_MASK1,DWT Mask Registers 1"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x20)
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x00)
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x30+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x40)++0x07
|
|
line.long 0x00 "DWT_COMP2,DWT Comparator Register 2"
|
|
line.long 0x04 "DWT_MASK2,DWT Mask Registers 2"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x20)
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x00)
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x40+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
group.long (0x50)++0x07
|
|
line.long 0x00 "DWT_COMP3,DWT Comparator Register 3"
|
|
line.long 0x04 "DWT_MASK3,DWT Mask Registers 3"
|
|
bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x20)
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE"
|
|
elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x00)
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE"
|
|
else
|
|
group.long (0x50+0x08)++0x03
|
|
line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3"
|
|
bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched"
|
|
bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved"
|
|
bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported"
|
|
bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE"
|
|
endif
|
|
width 6.
|
|
tree "CoreSight Identification Registers"
|
|
rgroup.long 0xFE0++0x0F
|
|
line.long 0x00 "PID0,Peripheral ID0"
|
|
hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]"
|
|
line.long 0x04 "PID1,Peripheral ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]"
|
|
line.long 0x08 "PID2,Peripheral ID2"
|
|
hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision"
|
|
bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC"
|
|
hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]"
|
|
line.long 0x0c "PID3,Peripheral ID3"
|
|
hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field"
|
|
hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block"
|
|
rgroup.long 0xFD0++0x03
|
|
line.long 0x00 "PID4,Peripheral Identification Register 4"
|
|
hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count"
|
|
hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code"
|
|
rgroup.long 0xFF0++0x0F
|
|
line.long 0x00 "CID0,Component ID0 (Preamble)"
|
|
line.long 0x04 "CID1,Component ID1"
|
|
hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class"
|
|
hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble"
|
|
line.long 0x08 "CID2,Component ID2"
|
|
line.long 0x0c "CID3,Component ID3"
|
|
tree.end
|
|
width 0x0B
|
|
else
|
|
newline
|
|
textline "DWT component base address not specified"
|
|
newline
|
|
endif
|
|
tree.end
|
|
tree.end
|
|
AUTOINDENT.POP
|
|
tree.end
|
|
config 16. 8.
|
|
tree "FLC (Flash Controller)"
|
|
base ad:0x40002000
|
|
width 17.
|
|
group.long 0x00++0x0B
|
|
line.long 0x00 "FLC_FADDR,Flash Operation Address"
|
|
hexmask.long.tbyte 0x00 0.--21. 0x01 " FADDR ,Flash operation address"
|
|
line.long 0x04 "FLC_FCKDIV,Flash Clock Rate Divisor"
|
|
hexmask.long.word 0x04 16.--31. 1. " AUTO_FCKDIV_RESULT ,Auto FCKDIV Calculation Result"
|
|
hexmask.long.byte 0x04 0.--6. 1. " FCKDIV ,Flash clock pulse divisor"
|
|
line.long 0x08 "FLC_CTRL,Flash Control Register"
|
|
bitfld.long 0x08 28.--31. " FLSH_UNLOCK ,Flash write/erase enable" "Disabled,Disabled,Enabled,Disabled,Disabled,Disabled,Disabled,Disabled,Disabled,Disabled,Disabled,Disabled,Disabled,Disabled,Disabled,Disabled"
|
|
bitfld.long 0x08 27. " AUTO_INCRE_MODE ,Address auto-increment mode" "Disabled,Enabled"
|
|
rbitfld.long 0x08 25. " INFO_BLOCK_VALID ,Info block valid status" "Not valid,Valid"
|
|
textline " "
|
|
rbitfld.long 0x08 24. " PENDING ,Flash controller status" "Idle,Busy"
|
|
rbitfld.long 0x08 17. " WRITE_ENABLE ,Flash writes enabled" "Disabled,Enabled"
|
|
rbitfld.long 0x08 16. " INFO_BLOCK_UNLOCK ,Flash info block locked" "Locked,Not locked"
|
|
textline " "
|
|
hexmask.long.byte 0x08 8.--15. 0x01 " ERASE_CODE ,Flash erase code"
|
|
bitfld.long 0x08 2. " PAGE_ERASE ,Start flash page erase operation" "Not started,Started"
|
|
bitfld.long 0x08 1. " MASS_ERASE ,Start flash mass erase operation" "Not started,Started"
|
|
textline " "
|
|
bitfld.long 0x08 0. " WRITE ,Start flash write operation" "Not started,Started"
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "FLC_INTR,Flash Controller Interrupt Flags and Enable/Disable 0"
|
|
hexmask.long.word 0x00 16.--31. 1. " FAIL_FLAGS ,Flash operation failure details"
|
|
bitfld.long 0x00 9. " FAILED_IE ,Flash operation failed interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " FINISHED_IE ,Flash write/erase operation finished interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " FAILED_IF ,Flash operation failed" "No Error,Error"
|
|
bitfld.long 0x00 0. " FINISHED_IF ,Flash operation completed" "Not finished,Finished"
|
|
group.long 0x30++0x03
|
|
line.long 0x00 "FLC_FDATA,Flash Operation Data Register"
|
|
if (((per.l(ad:0x40002000+0x88))&0x8000000)==0x00)
|
|
group.long 0x50++0x03
|
|
line.long 0x00 "FLC_PERFORM,Flash Performance Settings"
|
|
bitfld.long 0x00 29. " AUTO_CLKDIV ,Auto CLKDIV" "Not calculated,Calculated"
|
|
bitfld.long 0x00 28. " AUTO_TACC ,Auto TACC" "Not calculated,Calculated"
|
|
bitfld.long 0x00 24. " EN_MERGE_GRAB_GNT ,Enable merge grab GNT" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 20. " EN_BACK2BACK_WRS ,Enable back to back writes" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " EN_BACK2BACK_RDS ,Enable back to back reads" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " EN_PREVENT_FAIL ,Prevent fail flag set on FLC busy" "Idle,Busy"
|
|
textline " "
|
|
bitfld.long 0x00 8. " FAST_READ_MODE_EN ,Fast read mode enable (deprecated)" "0,1"
|
|
eventfld.long 0x00 0. " DELAY_SE_EN ,Delay SE enable (deprecated)" "0,1"
|
|
else
|
|
group.long 0x50++0x03
|
|
line.long 0x00 "FLC_PERFORM,Flash Performance Settings"
|
|
bitfld.long 0x00 29. " AUTO_CLKDIV ,Auto CLKDIV" "Not calculated,Calculated"
|
|
bitfld.long 0x00 28. " AUTO_TACC ,Auto TACC" "Not calculated,Calculated"
|
|
bitfld.long 0x00 24. " EN_MERGE_GRAB_GNT ,Enable merge grab GNT" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 20. " EN_BACK2BACK_WRS ,Enable back to back writes" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " EN_BACK2BACK_RDS ,Enable back to back reads" "Disabled,Enabled"
|
|
rbitfld.long 0x00 12. " EN_PREVENT_FAIL ,Prevent fail flag set on FLC busy" "Idle,Busy"
|
|
textline " "
|
|
bitfld.long 0x00 8. " FAST_READ_MODE_EN ,Fast read mode enable (deprecated)" "0,1"
|
|
eventfld.long 0x00 0. " DELAY_SE_EN ,Delay SE enable (deprecated)" "0,1"
|
|
endif
|
|
group.long 0x54++0x07
|
|
line.long 0x00 "FLC_TACC,Flash Read Cycle Config"
|
|
line.long 0x04 "FLC_TPROG,Flash Write Cycle Config"
|
|
rgroup.long 0x80++0x03
|
|
line.long 0x00 "FLC_STATUS,Security Status Flags"
|
|
bitfld.long 0x00 30. " INFO_BLOCK_VALID ,Info block valid" "Invalid,Valid"
|
|
bitfld.long 0x00 29. " TRIM_UPDATE_DONE ,Trim update done" "Not loaded,Loaded"
|
|
bitfld.long 0x00 3. " AUTO_LOCK ,Debug locked - auto lock" "Not locked,Locked"
|
|
textline " "
|
|
bitfld.long 0x00 1. " JTAG_LOCK_STATIC ,Debug locked - firmware lockout" "Not locked,Locked"
|
|
bitfld.long 0x00 0. " JTAG_LOCK_WINDOW ,Debug locked - hardware window" "Not locked,Locked"
|
|
if (((per.l(ad:0x40002000+0x88))&0xF000000)==0x0000000)&&(((per.l(ad:0x40002000+0x88))&0xF0000000)!=0x80000000)
|
|
group.long 0x88++0x03
|
|
line.long 0x00 "FLC_SECURITY,Flash Controller Security Settings"
|
|
bitfld.long 0x00 28.--31. " SECURITY_LOCK ,Security lock" "Not locked,Not locked,Not locked,Not locked,Not locked,Set,Not locked,Not locked,Locked,Not locked,Not locked,Not locked,Not locked,Not locked,Not locked,Not locked"
|
|
bitfld.long 0x00 24.--27. " FLC_SETTINGS_LOCK ,FLC settings lock" "Not locked,,,,,Set,,,Locked,?..."
|
|
bitfld.long 0x00 16.--19. " DISABLE_AHB_WR ,Disable AHB flash write operations (read/write)" "No/Clear,Yes/Clear,-/Clear,-/Set,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear"
|
|
textline " "
|
|
bitfld.long 0x00 8.--11. " MASS_ERASE_LOCK ,Mass erase lockout" "Unlocked,Locked,,,,,,,,,,,Set,?..."
|
|
hexmask.long.byte 0x00 0.--7. 1. " DEBUG_DISABLE ,Debug lockout"
|
|
elif (((per.l(ad:0x40002000+0x88))&0x0F000000)==0x8000000)&&(((per.l(ad:0x40002000+0x88))&0xF0000000)!=0x80000000)
|
|
group.long 0x88++0x03
|
|
line.long 0x00 "FLC_SECURITY,Flash Controller Security Settings"
|
|
bitfld.long 0x00 28.--31. " SECURITY_LOCK ,Security lock" "Not locked,Not locked,Not locked,Not locked,Not locked,Set,Not locked,Not locked,Locked,Not locked,Not locked,Not locked,Not locked,Not locked,Not locked,Not locked"
|
|
bitfld.long 0x00 24.--27. " FLC_SETTINGS_LOCK ,FLC settings lock" "Not locked,,,,,Set,,,Locked,?..."
|
|
rbitfld.long 0x00 16.--19. " DISABLE_AHB_WR ,Disable AHB flash write operations (read/write)" "No/Clear,Yes/Clear,-/Clear,-/Set,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear"
|
|
textline " "
|
|
bitfld.long 0x00 8.--11. " MASS_ERASE_LOCK ,Mass erase lockout" "Unlocked,Locked,,,,,,,,,,,Set,?..."
|
|
hexmask.long.byte 0x00 0.--7. 1. " DEBUG_DISABLE ,Debug lockout"
|
|
else
|
|
rgroup.long 0x88++0x03
|
|
line.long 0x00 "FLC_SECURITY,Flash Controller Security Settings"
|
|
bitfld.long 0x00 28.--31. " SECURITY_LOCK ,Security lock" "Not locked,Not locked,Not locked,Not locked,Not locked,Set,Not locked,Not locked,Locked,Not locked,Not locked,Not locked,Not locked,Not locked,Not locked,Not locked"
|
|
bitfld.long 0x00 24.--27. " FLC_SETTINGS_LOCK ,FLC settings lock" "Not locked,,,,,Set,,,Locked,?..."
|
|
bitfld.long 0x00 16.--19. " DISABLE_AHB_WR ,Disable AHB flash write operations (read/write)" "No/Clear,Yes/Clear,-/Clear,-/Set,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear,-/Clear"
|
|
textline " "
|
|
bitfld.long 0x00 8.--11. " MASS_ERASE_LOCK ,Mass erase lockout" "Unlocked,Locked,,,,,,,,,,,Set,?..."
|
|
hexmask.long.byte 0x00 0.--7. 1. " DEBUG_DISABLE ,Debug lockout"
|
|
endif
|
|
rgroup.long 0x9C++0x03
|
|
line.long 0x00 "FLC_BYPASS,Status Flags for DSB Operations"
|
|
bitfld.long 0x00 3. " SUPERWIPE_COMPLETE ,Superwipe erase complete" "Not completed,Completed"
|
|
bitfld.long 0x00 2. " DESTRUCT_BYPASS_COMPLETE ,Destructive security bypass erase complete" "Not completed,Completed"
|
|
bitfld.long 0x00 1. " SUPERWIPE_ERASE ,Superwipe erase in progress" "Not in progress,In progress"
|
|
textline " "
|
|
bitfld.long 0x00 0. " DESTRUCT_BYPASS_ERASE ,Destructive security bypass in progress" "Not in progress,In progress"
|
|
wgroup.long 0x100++0x03
|
|
line.long 0x00 "FLC_USER_OPTION,Used to set DSB Access code and Auto-Lock in info block"
|
|
group.long 0x140++0x0B
|
|
line.long 0x00 "FLC_CTRL2,Flash Control Register 2"
|
|
hexmask.long.byte 0x00 8.--15. 1. " BYPASS_AHB_FAIL ,AHB fail bypass"
|
|
bitfld.long 0x00 6. " ENABLE_RAM_HRESP ,Enable RAM HRESP" "Disabled,Enabled"
|
|
rbitfld.long 0x00 5. " SLOW_CLK ,Clock too slow status" "Not too slow,Too slow"
|
|
textline " "
|
|
bitfld.long 0x00 4. " EN_CHANGE ,Enable FLC register changes" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EN_WRITE_ALL_ZEROES ,Enable write all zeroes" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " FRC_FCLK1_ON ,Force FCLK1 on (Test only)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " FLASH_LVE ,Flash LVE enable (Test only)" "Disabled,Enabled"
|
|
line.long 0x04 "FLC_INTFL1,Interrupt Flags Register 1"
|
|
eventfld.long 0x04 5. " FLC_PROG_COMPLETE ,Program (write or erase) operation completed interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 4. " FLC_STATE_DONE ,FLC state machine reached DONE interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 3. " TRIM_UPDATE_DONE ,Trim update complete interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x04 2. " FLASH_READ_LOCKED ,Flash read from locked area interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 1. " INVALID_FLASH_ADDR ,Invalid flash address interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 0. " SRAM_ADDR_WRAPPED ,SRAM address wrapped interrupt flag" "No interrupt,Interrupt"
|
|
line.long 0x08 "FLC_INTEN1,FLC_INTEN1"
|
|
bitfld.long 0x08 5. " FLC_PROG_COMPLETE ,Program (write or erase) op completed interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 4. " FLC_STATE_DONE ,FLC state machine reached DONE interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 3. " TRIM_UPDATE_DONE ,Trim update complete interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 2. " FLASH_READ_LOCKED ,Flash read from locked area interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " INVALID_FLASH_ADDR ,Invalid flash address interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " SRAM_ADDR_WRAPPED ,SRAM address wrapped interrupt enable" "Disabled,Enabled"
|
|
group.long 0x170++0x07
|
|
line.long 0x00 "FLC_BL_CTRL,Bootloader Control Register (Internal use only)"
|
|
line.long 0x04 "FLC_TWK,FLC TWK Cycle Count Register (Internal use only)"
|
|
group.long 0x17C++0x03
|
|
line.long 0x00 "FLC_SLM,Sleep Mode Register (Internal use only)"
|
|
textline " "
|
|
width 17.
|
|
group.long 0x200++0x1F
|
|
line.long 0x00 "FLC_DISABLE_XR0,Disable Flash Page Exec/Read Register 0"
|
|
bitfld.long 0x00 31. " PAGE31 ,Disable the execution/read permission for page 31 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 30. " PAGE30 ,Disable the execution/read permission for page 30 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 29. " PAGE29 ,Disable the execution/read permission for page 29 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 28. " PAGE28 ,Disable the execution/read permission for page 28 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 27. " PAGE27 ,Disable the execution/read permission for page 27 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 26. " PAGE26 ,Disable the execution/read permission for page 26 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 25. " PAGE25 ,Disable the execution/read permission for page 25 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 24. " PAGE24 ,Disable the execution/read permission for page 24 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 23. " PAGE23 ,Disable the execution/read permission for page 23 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 22. " PAGE22 ,Disable the execution/read permission for page 22 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 21. " PAGE21 ,Disable the execution/read permission for page 21 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 20. " PAGE20 ,Disable the execution/read permission for page 20 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 19. " PAGE19 ,Disable the execution/read permission for page 19 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 18. " PAGE18 ,Disable the execution/read permission for page 18 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 17. " PAGE17 ,Disable the execution/read permission for page 17 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 16. " PAGE16 ,Disable the execution/read permission for page 16 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 15. " PAGE15 ,Disable the execution/read permission for page 15 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 14. " PAGE14 ,Disable the execution/read permission for page 14 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 13. " PAGE13 ,Disable the execution/read permission for page 13 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 12. " PAGE12 ,Disable the execution/read permission for page 12 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 11. " PAGE11 ,Disable the execution/read permission for page 11 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 10. " PAGE10 ,Disable the execution/read permission for page 10 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 9. " PAGE9 ,Disable the execution/read permission for page 9 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 8. " PAGE8 ,Disable the execution/read permission for page 8 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 7. " PAGE7 ,Disable the execution/read permission for page 7 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 6. " PAGE6 ,Disable the execution/read permission for page 6 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 5. " PAGE5 ,Disable the execution/read permission for page 5 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 4. " PAGE4 ,Disable the execution/read permission for page 4 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PAGE3 ,Disable the execution/read permission for page 3 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 2. " PAGE2 ,Disable the execution/read permission for page 2 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 1. " PAGE1 ,Disable the execution/read permission for page 1 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 0. " PAGE0 ,Disable the execution/read permission for page 0 of the main flash memory" "No,Yes"
|
|
line.long 0x04 "FLC_DISABLE_XR1,Disable Flash Page Exec/Read Register 1"
|
|
bitfld.long 0x04 31. " PAGE63 ,Disable the execution/read permission for page 63 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 30. " PAGE62 ,Disable the execution/read permission for page 62 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 29. " PAGE61 ,Disable the execution/read permission for page 61 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 28. " PAGE60 ,Disable the execution/read permission for page 60 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 27. " PAGE59 ,Disable the execution/read permission for page 59 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 26. " PAGE58 ,Disable the execution/read permission for page 58 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 25. " PAGE57 ,Disable the execution/read permission for page 57 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 24. " PAGE56 ,Disable the execution/read permission for page 56 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 23. " PAGE55 ,Disable the execution/read permission for page 55 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 22. " PAGE54 ,Disable the execution/read permission for page 54 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 21. " PAGE53 ,Disable the execution/read permission for page 53 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 20. " PAGE52 ,Disable the execution/read permission for page 52 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 19. " PAGE51 ,Disable the execution/read permission for page 51 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 18. " PAGE50 ,Disable the execution/read permission for page 50 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 17. " PAGE49 ,Disable the execution/read permission for page 49 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 16. " PAGE48 ,Disable the execution/read permission for page 48 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 15. " PAGE47 ,Disable the execution/read permission for page 47 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 14. " PAGE46 ,Disable the execution/read permission for page 46 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 13. " PAGE45 ,Disable the execution/read permission for page 45 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 12. " PAGE44 ,Disable the execution/read permission for page 44 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 11. " PAGE43 ,Disable the execution/read permission for page 43 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 10. " PAGE42 ,Disable the execution/read permission for page 42 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 9. " PAGE41 ,Disable the execution/read permission for page 41 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 8. " PAGE40 ,Disable the execution/read permission for page 40 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 7. " PAGE39 ,Disable the execution/read permission for page 39 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 6. " PAGE38 ,Disable the execution/read permission for page 38 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 5. " PAGE37 ,Disable the execution/read permission for page 37 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 4. " PAGE36 ,Disable the execution/read permission for page 36 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 3. " PAGE35 ,Disable the execution/read permission for page 35 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 2. " PAGE34 ,Disable the execution/read permission for page 34 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 1. " PAGE33 ,Disable the execution/read permission for page 33 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 0. " PAGE32 ,Disable the execution/read permission for page 32 of the main flash memory" "No,Yes"
|
|
line.long 0x08 "FLC_DISABLE_XR2,Disable Flash Page Exec/Read Register 2"
|
|
bitfld.long 0x08 31. " PAGE95 ,Disable the execution/read permission for page 95 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 30. " PAGE94 ,Disable the execution/read permission for page 94 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 29. " PAGE93 ,Disable the execution/read permission for page 93 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 28. " PAGE92 ,Disable the execution/read permission for page 92 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 27. " PAGE91 ,Disable the execution/read permission for page 91 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 26. " PAGE90 ,Disable the execution/read permission for page 90 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 25. " PAGE89 ,Disable the execution/read permission for page 89 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 24. " PAGE88 ,Disable the execution/read permission for page 88 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 23. " PAGE87 ,Disable the execution/read permission for page 87 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 22. " PAGE86 ,Disable the execution/read permission for page 86 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 21. " PAGE85 ,Disable the execution/read permission for page 85 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 20. " PAGE84 ,Disable the execution/read permission for page 84 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 19. " PAGE83 ,Disable the execution/read permission for page 83 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 18. " PAGE82 ,Disable the execution/read permission for page 82 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 17. " PAGE81 ,Disable the execution/read permission for page 81 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 16. " PAGE80 ,Disable the execution/read permission for page 80 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 15. " PAGE79 ,Disable the execution/read permission for page 79 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 14. " PAGE78 ,Disable the execution/read permission for page 78 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 13. " PAGE77 ,Disable the execution/read permission for page 77 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 12. " PAGE76 ,Disable the execution/read permission for page 76 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 11. " PAGE75 ,Disable the execution/read permission for page 75 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 10. " PAGE74 ,Disable the execution/read permission for page 74 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 9. " PAGE73 ,Disable the execution/read permission for page 73 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 8. " PAGE72 ,Disable the execution/read permission for page 72 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 7. " PAGE71 ,Disable the execution/read permission for page 71 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 6. " PAGE70 ,Disable the execution/read permission for page 70 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 5. " PAGE69 ,Disable the execution/read permission for page 69 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 4. " PAGE68 ,Disable the execution/read permission for page 68 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 3. " PAGE67 ,Disable the execution/read permission for page 67 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 2. " PAGE66 ,Disable the execution/read permission for page 66 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 1. " PAGE65 ,Disable the execution/read permission for page 65 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 0. " PAGE64 ,Disable the execution/read permission for page 64 of the main flash memory" "No,Yes"
|
|
line.long 0x0C "FLC_DISABLE_XR3,Disable Flash Page Exec/Read Register 3"
|
|
bitfld.long 0x0C 31. " PAGE127 ,Disable the execution/read permission for page 127 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 30. " PAGE126 ,Disable the execution/read permission for page 126 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 29. " PAGE125 ,Disable the execution/read permission for page 125 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 28. " PAGE124 ,Disable the execution/read permission for page 124 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 27. " PAGE123 ,Disable the execution/read permission for page 123 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 26. " PAGE122 ,Disable the execution/read permission for page 122 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 25. " PAGE121 ,Disable the execution/read permission for page 121 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 24. " PAGE120 ,Disable the execution/read permission for page 120 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 23. " PAGE119 ,Disable the execution/read permission for page 119 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 22. " PAGE118 ,Disable the execution/read permission for page 118 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 21. " PAGE117 ,Disable the execution/read permission for page 117 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 20. " PAGE116 ,Disable the execution/read permission for page 116 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 19. " PAGE115 ,Disable the execution/read permission for page 115 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 18. " PAGE114 ,Disable the execution/read permission for page 114 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 17. " PAGE113 ,Disable the execution/read permission for page 113 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 16. " PAGE112 ,Disable the execution/read permission for page 112 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 15. " PAGE111 ,Disable the execution/read permission for page 111 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 14. " PAGE110 ,Disable the execution/read permission for page 110 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 13. " PAGE109 ,Disable the execution/read permission for page 109 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 12. " PAGE108 ,Disable the execution/read permission for page 108 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 11. " PAGE107 ,Disable the execution/read permission for page 107 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 10. " PAGE106 ,Disable the execution/read permission for page 106 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 9. " PAGE105 ,Disable the execution/read permission for page 105 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 8. " PAGE104 ,Disable the execution/read permission for page 104 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 7. " PAGE103 ,Disable the execution/read permission for page 103 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 6. " PAGE102 ,Disable the execution/read permission for page 102 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 5. " PAGE101 ,Disable the execution/read permission for page 101 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 4. " PAGE100 ,Disable the execution/read permission for page 100 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 3. " PAGE99 ,Disable the execution/read permission for page 99 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 2. " PAGE98 ,Disable the execution/read permission for page 98 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 1. " PAGE97 ,Disable the execution/read permission for page 97 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 0. " PAGE96 ,Disable the execution/read permission for page 96 of the main flash memory" "No,Yes"
|
|
line.long 0x10 "FLC_DISABLE_XR4,Disable Flash Page Exec/Read Register 4"
|
|
bitfld.long 0x10 31. " PAGE159 ,Disable the execution/read permission for page 159 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 30. " PAGE158 ,Disable the execution/read permission for page 158 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 29. " PAGE157 ,Disable the execution/read permission for page 157 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 28. " PAGE156 ,Disable the execution/read permission for page 156 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 27. " PAGE155 ,Disable the execution/read permission for page 155 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 26. " PAGE154 ,Disable the execution/read permission for page 154 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 25. " PAGE153 ,Disable the execution/read permission for page 153 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 24. " PAGE152 ,Disable the execution/read permission for page 152 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 23. " PAGE151 ,Disable the execution/read permission for page 151 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 22. " PAGE150 ,Disable the execution/read permission for page 150 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 21. " PAGE149 ,Disable the execution/read permission for page 149 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 20. " PAGE148 ,Disable the execution/read permission for page 148 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 19. " PAGE147 ,Disable the execution/read permission for page 147 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 18. " PAGE146 ,Disable the execution/read permission for page 146 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 17. " PAGE145 ,Disable the execution/read permission for page 145 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 16. " PAGE144 ,Disable the execution/read permission for page 144 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 15. " PAGE143 ,Disable the execution/read permission for page 143 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 14. " PAGE142 ,Disable the execution/read permission for page 142 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 13. " PAGE141 ,Disable the execution/read permission for page 141 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 12. " PAGE140 ,Disable the execution/read permission for page 140 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 11. " PAGE139 ,Disable the execution/read permission for page 139 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 10. " PAGE138 ,Disable the execution/read permission for page 138 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 9. " PAGE137 ,Disable the execution/read permission for page 137 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 8. " PAGE136 ,Disable the execution/read permission for page 136 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 7. " PAGE135 ,Disable the execution/read permission for page 135 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 6. " PAGE134 ,Disable the execution/read permission for page 134 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 5. " PAGE133 ,Disable the execution/read permission for page 133 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 4. " PAGE132 ,Disable the execution/read permission for page 132 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 3. " PAGE131 ,Disable the execution/read permission for page 131 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 2. " PAGE130 ,Disable the execution/read permission for page 130 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 1. " PAGE129 ,Disable the execution/read permission for page 129 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 0. " PAGE128 ,Disable the execution/read permission for page 128 of the main flash memory" "No,Yes"
|
|
line.long 0x14 "FLC_DISABLE_XR5,Disable Flash Page Exec/Read Register 5"
|
|
bitfld.long 0x14 31. " PAGE191 ,Disable the execution/read permission for page 191 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 30. " PAGE190 ,Disable the execution/read permission for page 190 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 29. " PAGE189 ,Disable the execution/read permission for page 189 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 28. " PAGE188 ,Disable the execution/read permission for page 188 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 27. " PAGE187 ,Disable the execution/read permission for page 187 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 26. " PAGE186 ,Disable the execution/read permission for page 186 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 25. " PAGE185 ,Disable the execution/read permission for page 185 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 24. " PAGE184 ,Disable the execution/read permission for page 184 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 23. " PAGE183 ,Disable the execution/read permission for page 183 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 22. " PAGE182 ,Disable the execution/read permission for page 182 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 21. " PAGE181 ,Disable the execution/read permission for page 181 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 20. " PAGE180 ,Disable the execution/read permission for page 180 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 19. " PAGE179 ,Disable the execution/read permission for page 179 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 18. " PAGE178 ,Disable the execution/read permission for page 178 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 17. " PAGE177 ,Disable the execution/read permission for page 177 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 16. " PAGE176 ,Disable the execution/read permission for page 176 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 15. " PAGE175 ,Disable the execution/read permission for page 175 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 14. " PAGE174 ,Disable the execution/read permission for page 174 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 13. " PAGE173 ,Disable the execution/read permission for page 173 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 12. " PAGE172 ,Disable the execution/read permission for page 172 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 11. " PAGE171 ,Disable the execution/read permission for page 171 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 10. " PAGE170 ,Disable the execution/read permission for page 170 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 9. " PAGE169 ,Disable the execution/read permission for page 169 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 8. " PAGE168 ,Disable the execution/read permission for page 168 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 7. " PAGE167 ,Disable the execution/read permission for page 167 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 6. " PAGE166 ,Disable the execution/read permission for page 166 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 5. " PAGE165 ,Disable the execution/read permission for page 165 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 4. " PAGE164 ,Disable the execution/read permission for page 164 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 3. " PAGE163 ,Disable the execution/read permission for page 163 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 2. " PAGE162 ,Disable the execution/read permission for page 162 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 1. " PAGE161 ,Disable the execution/read permission for page 161 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 0. " PAGE160 ,Disable the execution/read permission for page 160 of the main flash memory" "No,Yes"
|
|
line.long 0x18 "FLC_DISABLE_XR6,Disable Flash Page Exec/Read Register 6"
|
|
bitfld.long 0x18 31. " PAGE223 ,Disable the execution/read permission for page 223 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 30. " PAGE222 ,Disable the execution/read permission for page 222 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 29. " PAGE221 ,Disable the execution/read permission for page 221 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 28. " PAGE220 ,Disable the execution/read permission for page 220 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 27. " PAGE219 ,Disable the execution/read permission for page 219 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 26. " PAGE218 ,Disable the execution/read permission for page 218 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 25. " PAGE217 ,Disable the execution/read permission for page 217 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 24. " PAGE216 ,Disable the execution/read permission for page 216 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 23. " PAGE215 ,Disable the execution/read permission for page 215 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 22. " PAGE214 ,Disable the execution/read permission for page 214 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 21. " PAGE213 ,Disable the execution/read permission for page 213 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 20. " PAGE212 ,Disable the execution/read permission for page 212 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 19. " PAGE211 ,Disable the execution/read permission for page 211 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 18. " PAGE210 ,Disable the execution/read permission for page 210 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 17. " PAGE209 ,Disable the execution/read permission for page 209 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 16. " PAGE208 ,Disable the execution/read permission for page 208 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 15. " PAGE207 ,Disable the execution/read permission for page 207 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 14. " PAGE206 ,Disable the execution/read permission for page 206 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 13. " PAGE205 ,Disable the execution/read permission for page 205 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 12. " PAGE204 ,Disable the execution/read permission for page 204 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 11. " PAGE203 ,Disable the execution/read permission for page 203 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 10. " PAGE202 ,Disable the execution/read permission for page 202 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 9. " PAGE201 ,Disable the execution/read permission for page 201 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 8. " PAGE200 ,Disable the execution/read permission for page 200 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 7. " PAGE199 ,Disable the execution/read permission for page 199 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 6. " PAGE198 ,Disable the execution/read permission for page 198 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 5. " PAGE197 ,Disable the execution/read permission for page 197 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 4. " PAGE196 ,Disable the execution/read permission for page 196 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 3. " PAGE195 ,Disable the execution/read permission for page 195 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 2. " PAGE194 ,Disable the execution/read permission for page 194 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 1. " PAGE193 ,Disable the execution/read permission for page 193 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 0. " PAGE192 ,Disable the execution/read permission for page 192 of the main flash memory" "No,Yes"
|
|
line.long 0x1C "FLC_DISABLE_XR7,Disable Flash Page Exec/Read Register 6"
|
|
bitfld.long 0x1C 31. " PAGE255 ,Disable the execution/read permission for page 255 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 30. " PAGE254 ,Disable the execution/read permission for page 254 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 29. " PAGE253 ,Disable the execution/read permission for page 253 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 28. " PAGE252 ,Disable the execution/read permission for page 252 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 27. " PAGE251 ,Disable the execution/read permission for page 251 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 26. " PAGE250 ,Disable the execution/read permission for page 250 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 25. " PAGE249 ,Disable the execution/read permission for page 249 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 24. " PAGE248 ,Disable the execution/read permission for page 248 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 23. " PAGE247 ,Disable the execution/read permission for page 247 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 22. " PAGE246 ,Disable the execution/read permission for page 246 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 21. " PAGE245 ,Disable the execution/read permission for page 245 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 20. " PAGE244 ,Disable the execution/read permission for page 244 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 19. " PAGE243 ,Disable the execution/read permission for page 243 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 18. " PAGE242 ,Disable the execution/read permission for page 242 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 17. " PAGE241 ,Disable the execution/read permission for page 241 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 16. " PAGE240 ,Disable the execution/read permission for page 240 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 15. " PAGE239 ,Disable the execution/read permission for page 239 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 14. " PAGE238 ,Disable the execution/read permission for page 238 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 13. " PAGE237 ,Disable the execution/read permission for page 237 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 12. " PAGE236 ,Disable the execution/read permission for page 236 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 11. " PAGE235 ,Disable the execution/read permission for page 235 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 10. " PAGE234 ,Disable the execution/read permission for page 234 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 9. " PAGE233 ,Disable the execution/read permission for page 233 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 8. " PAGE232 ,Disable the execution/read permission for page 232 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 7. " PAGE231 ,Disable the execution/read permission for page 231 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 6. " PAGE230 ,Disable the execution/read permission for page 230 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 5. " PAGE229 ,Disable the execution/read permission for page 229 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 4. " PAGE228 ,Disable the execution/read permission for page 228 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 3. " PAGE227 ,Disable the execution/read permission for page 227 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 2. " PAGE226 ,Disable the execution/read permission for page 226 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 1. " PAGE225 ,Disable the execution/read permission for page 225 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 0. " PAGE224 ,Disable the execution/read permission for page 224 of the main flash memory" "No,Yes"
|
|
group.long 0x300++0x1F
|
|
line.long 0x00 "FLC_DISABLE_WE0,Disable Flash Page Write/Erase Register 0"
|
|
bitfld.long 0x00 31. " PAGE31 ,Disable the write/erase permission for page 31 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 30. " PAGE30 ,Disable the write/erase permission for page 30 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 29. " PAGE29 ,Disable the write/erase permission for page 29 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 28. " PAGE28 ,Disable the write/erase permission for page 28 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 27. " PAGE27 ,Disable the write/erase permission for page 27 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 26. " PAGE26 ,Disable the write/erase permission for page 26 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 25. " PAGE25 ,Disable the write/erase permission for page 25 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 24. " PAGE24 ,Disable the write/erase permission for page 24 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 23. " PAGE23 ,Disable the write/erase permission for page 23 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 22. " PAGE22 ,Disable the write/erase permission for page 22 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 21. " PAGE21 ,Disable the write/erase permission for page 21 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 20. " PAGE20 ,Disable the write/erase permission for page 20 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 19. " PAGE19 ,Disable the write/erase permission for page 19 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 18. " PAGE18 ,Disable the write/erase permission for page 18 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 17. " PAGE17 ,Disable the write/erase permission for page 17 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 16. " PAGE16 ,Disable the write/erase permission for page 16 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 15. " PAGE15 ,Disable the write/erase permission for page 15 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 14. " PAGE14 ,Disable the write/erase permission for page 14 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 13. " PAGE13 ,Disable the write/erase permission for page 13 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 12. " PAGE12 ,Disable the write/erase permission for page 12 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 11. " PAGE11 ,Disable the write/erase permission for page 11 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 10. " PAGE10 ,Disable the write/erase permission for page 10 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 9. " PAGE9 ,Disable the write/erase permission for page 9 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 8. " PAGE8 ,Disable the write/erase permission for page 8 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 7. " PAGE7 ,Disable the write/erase permission for page 7 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 6. " PAGE6 ,Disable the write/erase permission for page 6 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 5. " PAGE5 ,Disable the write/erase permission for page 5 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 4. " PAGE4 ,Disable the write/erase permission for page 4 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PAGE3 ,Disable the write/erase permission for page 3 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 2. " PAGE2 ,Disable the write/erase permission for page 2 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 1. " PAGE1 ,Disable the write/erase permission for page 1 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x00 0. " PAGE0 ,Disable the write/erase permission for page 0 of the main flash memory" "No,Yes"
|
|
line.long 0x04 "FLC_DISABLE_WE1,Disable Flash Page Write/Erase Register 1"
|
|
bitfld.long 0x04 31. " PAGE63 ,Disable the write/erase permission for page 63 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 30. " PAGE62 ,Disable the write/erase permission for page 62 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 29. " PAGE61 ,Disable the write/erase permission for page 61 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 28. " PAGE60 ,Disable the write/erase permission for page 60 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 27. " PAGE59 ,Disable the write/erase permission for page 59 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 26. " PAGE58 ,Disable the write/erase permission for page 58 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 25. " PAGE57 ,Disable the write/erase permission for page 57 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 24. " PAGE56 ,Disable the write/erase permission for page 56 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 23. " PAGE55 ,Disable the write/erase permission for page 55 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 22. " PAGE54 ,Disable the write/erase permission for page 54 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 21. " PAGE53 ,Disable the write/erase permission for page 53 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 20. " PAGE52 ,Disable the write/erase permission for page 52 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 19. " PAGE51 ,Disable the write/erase permission for page 51 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 18. " PAGE50 ,Disable the write/erase permission for page 50 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 17. " PAGE49 ,Disable the write/erase permission for page 49 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 16. " PAGE48 ,Disable the write/erase permission for page 48 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 15. " PAGE47 ,Disable the write/erase permission for page 47 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 14. " PAGE46 ,Disable the write/erase permission for page 46 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 13. " PAGE45 ,Disable the write/erase permission for page 45 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 12. " PAGE44 ,Disable the write/erase permission for page 44 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 11. " PAGE43 ,Disable the write/erase permission for page 43 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 10. " PAGE42 ,Disable the write/erase permission for page 42 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 9. " PAGE41 ,Disable the write/erase permission for page 41 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 8. " PAGE40 ,Disable the write/erase permission for page 40 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 7. " PAGE39 ,Disable the write/erase permission for page 39 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 6. " PAGE38 ,Disable the write/erase permission for page 38 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 5. " PAGE37 ,Disable the write/erase permission for page 37 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 4. " PAGE36 ,Disable the write/erase permission for page 36 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x04 3. " PAGE35 ,Disable the write/erase permission for page 35 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 2. " PAGE34 ,Disable the write/erase permission for page 34 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 1. " PAGE33 ,Disable the write/erase permission for page 33 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x04 0. " PAGE32 ,Disable the write/erase permission for page 32 of the main flash memory" "No,Yes"
|
|
line.long 0x08 "FLC_DISABLE_WE2,Disable Flash Page Write/Erase Register 2"
|
|
bitfld.long 0x08 31. " PAGE95 ,Disable the write/erase permission for page 95 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 30. " PAGE94 ,Disable the write/erase permission for page 94 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 29. " PAGE93 ,Disable the write/erase permission for page 93 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 28. " PAGE92 ,Disable the write/erase permission for page 92 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 27. " PAGE91 ,Disable the write/erase permission for page 91 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 26. " PAGE90 ,Disable the write/erase permission for page 90 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 25. " PAGE89 ,Disable the write/erase permission for page 89 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 24. " PAGE88 ,Disable the write/erase permission for page 88 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 23. " PAGE87 ,Disable the write/erase permission for page 87 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 22. " PAGE86 ,Disable the write/erase permission for page 86 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 21. " PAGE85 ,Disable the write/erase permission for page 85 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 20. " PAGE84 ,Disable the write/erase permission for page 84 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 19. " PAGE83 ,Disable the write/erase permission for page 83 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 18. " PAGE82 ,Disable the write/erase permission for page 82 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 17. " PAGE81 ,Disable the write/erase permission for page 81 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 16. " PAGE80 ,Disable the write/erase permission for page 80 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 15. " PAGE79 ,Disable the write/erase permission for page 79 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 14. " PAGE78 ,Disable the write/erase permission for page 78 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 13. " PAGE77 ,Disable the write/erase permission for page 77 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 12. " PAGE76 ,Disable the write/erase permission for page 76 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 11. " PAGE75 ,Disable the write/erase permission for page 75 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 10. " PAGE74 ,Disable the write/erase permission for page 74 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 9. " PAGE73 ,Disable the write/erase permission for page 73 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 8. " PAGE72 ,Disable the write/erase permission for page 72 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 7. " PAGE71 ,Disable the write/erase permission for page 71 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 6. " PAGE70 ,Disable the write/erase permission for page 70 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 5. " PAGE69 ,Disable the write/erase permission for page 69 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 4. " PAGE68 ,Disable the write/erase permission for page 68 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x08 3. " PAGE67 ,Disable the write/erase permission for page 67 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 2. " PAGE66 ,Disable the write/erase permission for page 66 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 1. " PAGE65 ,Disable the write/erase permission for page 65 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x08 0. " PAGE64 ,Disable the write/erase permission for page 64 of the main flash memory" "No,Yes"
|
|
line.long 0x0C "FLC_DISABLE_WE3,Disable Flash Page Write/Erase Register 3"
|
|
bitfld.long 0x0C 31. " PAGE127 ,Disable the write/erase permission for page 127 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 30. " PAGE126 ,Disable the write/erase permission for page 126 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 29. " PAGE125 ,Disable the write/erase permission for page 125 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 28. " PAGE124 ,Disable the write/erase permission for page 124 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 27. " PAGE123 ,Disable the write/erase permission for page 123 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 26. " PAGE122 ,Disable the write/erase permission for page 122 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 25. " PAGE121 ,Disable the write/erase permission for page 121 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 24. " PAGE120 ,Disable the write/erase permission for page 120 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 23. " PAGE119 ,Disable the write/erase permission for page 119 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 22. " PAGE118 ,Disable the write/erase permission for page 118 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 21. " PAGE117 ,Disable the write/erase permission for page 117 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 20. " PAGE116 ,Disable the write/erase permission for page 116 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 19. " PAGE115 ,Disable the write/erase permission for page 115 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 18. " PAGE114 ,Disable the write/erase permission for page 114 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 17. " PAGE113 ,Disable the write/erase permission for page 113 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 16. " PAGE112 ,Disable the write/erase permission for page 112 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 15. " PAGE111 ,Disable the write/erase permission for page 111 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 14. " PAGE110 ,Disable the write/erase permission for page 110 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 13. " PAGE109 ,Disable the write/erase permission for page 109 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 12. " PAGE108 ,Disable the write/erase permission for page 108 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 11. " PAGE107 ,Disable the write/erase permission for page 107 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 10. " PAGE106 ,Disable the write/erase permission for page 106 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 9. " PAGE105 ,Disable the write/erase permission for page 105 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 8. " PAGE104 ,Disable the write/erase permission for page 104 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 7. " PAGE103 ,Disable the write/erase permission for page 103 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 6. " PAGE102 ,Disable the write/erase permission for page 102 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 5. " PAGE101 ,Disable the write/erase permission for page 101 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 4. " PAGE100 ,Disable the write/erase permission for page 100 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x0C 3. " PAGE99 ,Disable the write/erase permission for page 99 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 2. " PAGE98 ,Disable the write/erase permission for page 98 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 1. " PAGE97 ,Disable the write/erase permission for page 97 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x0C 0. " PAGE96 ,Disable the write/erase permission for page 96 of the main flash memory" "No,Yes"
|
|
line.long 0x10 "FLC_DISABLE_WE4,Disable Flash Page Write/Erase Register 4"
|
|
bitfld.long 0x10 31. " PAGE159 ,Disable the write/erase permission for page 159 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 30. " PAGE158 ,Disable the write/erase permission for page 158 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 29. " PAGE157 ,Disable the write/erase permission for page 157 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 28. " PAGE156 ,Disable the write/erase permission for page 156 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 27. " PAGE155 ,Disable the write/erase permission for page 155 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 26. " PAGE154 ,Disable the write/erase permission for page 154 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 25. " PAGE153 ,Disable the write/erase permission for page 153 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 24. " PAGE152 ,Disable the write/erase permission for page 152 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 23. " PAGE151 ,Disable the write/erase permission for page 151 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 22. " PAGE150 ,Disable the write/erase permission for page 150 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 21. " PAGE149 ,Disable the write/erase permission for page 149 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 20. " PAGE148 ,Disable the write/erase permission for page 148 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 19. " PAGE147 ,Disable the write/erase permission for page 147 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 18. " PAGE146 ,Disable the write/erase permission for page 146 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 17. " PAGE145 ,Disable the write/erase permission for page 145 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 16. " PAGE144 ,Disable the write/erase permission for page 144 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 15. " PAGE143 ,Disable the write/erase permission for page 143 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 14. " PAGE142 ,Disable the write/erase permission for page 142 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 13. " PAGE141 ,Disable the write/erase permission for page 141 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 12. " PAGE140 ,Disable the write/erase permission for page 140 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 11. " PAGE139 ,Disable the write/erase permission for page 139 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 10. " PAGE138 ,Disable the write/erase permission for page 138 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 9. " PAGE137 ,Disable the write/erase permission for page 137 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 8. " PAGE136 ,Disable the write/erase permission for page 136 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 7. " PAGE135 ,Disable the write/erase permission for page 135 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 6. " PAGE134 ,Disable the write/erase permission for page 134 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 5. " PAGE133 ,Disable the write/erase permission for page 133 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 4. " PAGE132 ,Disable the write/erase permission for page 132 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x10 3. " PAGE131 ,Disable the write/erase permission for page 131 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 2. " PAGE130 ,Disable the write/erase permission for page 130 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 1. " PAGE129 ,Disable the write/erase permission for page 129 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x10 0. " PAGE128 ,Disable the write/erase permission for page 128 of the main flash memory" "No,Yes"
|
|
line.long 0x14 "FLC_DISABLE_WE5,Disable Flash Page Write/Erase Register 5"
|
|
bitfld.long 0x14 31. " PAGE191 ,Disable the write/erase permission for page 191 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 30. " PAGE190 ,Disable the write/erase permission for page 190 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 29. " PAGE189 ,Disable the write/erase permission for page 189 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 28. " PAGE188 ,Disable the write/erase permission for page 188 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 27. " PAGE187 ,Disable the write/erase permission for page 187 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 26. " PAGE186 ,Disable the write/erase permission for page 186 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 25. " PAGE185 ,Disable the write/erase permission for page 185 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 24. " PAGE184 ,Disable the write/erase permission for page 184 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 23. " PAGE183 ,Disable the write/erase permission for page 183 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 22. " PAGE182 ,Disable the write/erase permission for page 182 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 21. " PAGE181 ,Disable the write/erase permission for page 181 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 20. " PAGE180 ,Disable the write/erase permission for page 180 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 19. " PAGE179 ,Disable the write/erase permission for page 179 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 18. " PAGE178 ,Disable the write/erase permission for page 178 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 17. " PAGE177 ,Disable the write/erase permission for page 177 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 16. " PAGE176 ,Disable the write/erase permission for page 176 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 15. " PAGE175 ,Disable the write/erase permission for page 175 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 14. " PAGE174 ,Disable the write/erase permission for page 174 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 13. " PAGE173 ,Disable the write/erase permission for page 173 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 12. " PAGE172 ,Disable the write/erase permission for page 172 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 11. " PAGE171 ,Disable the write/erase permission for page 171 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 10. " PAGE170 ,Disable the write/erase permission for page 170 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 9. " PAGE169 ,Disable the write/erase permission for page 169 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 8. " PAGE168 ,Disable the write/erase permission for page 168 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 7. " PAGE167 ,Disable the write/erase permission for page 167 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 6. " PAGE166 ,Disable the write/erase permission for page 166 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 5. " PAGE165 ,Disable the write/erase permission for page 165 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 4. " PAGE164 ,Disable the write/erase permission for page 164 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x14 3. " PAGE163 ,Disable the write/erase permission for page 163 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 2. " PAGE162 ,Disable the write/erase permission for page 162 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 1. " PAGE161 ,Disable the write/erase permission for page 161 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x14 0. " PAGE160 ,Disable the write/erase permission for page 160 of the main flash memory" "No,Yes"
|
|
line.long 0x18 "FLC_DISABLE_WE6,Disable Flash Page Write/Erase Register 6"
|
|
bitfld.long 0x18 31. " PAGE223 ,Disable the write/erase permission for page 223 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 30. " PAGE222 ,Disable the write/erase permission for page 222 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 29. " PAGE221 ,Disable the write/erase permission for page 221 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 28. " PAGE220 ,Disable the write/erase permission for page 220 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 27. " PAGE219 ,Disable the write/erase permission for page 219 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 26. " PAGE218 ,Disable the write/erase permission for page 218 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 25. " PAGE217 ,Disable the write/erase permission for page 217 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 24. " PAGE216 ,Disable the write/erase permission for page 216 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 23. " PAGE215 ,Disable the write/erase permission for page 215 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 22. " PAGE214 ,Disable the write/erase permission for page 214 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 21. " PAGE213 ,Disable the write/erase permission for page 213 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 20. " PAGE212 ,Disable the write/erase permission for page 212 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 19. " PAGE211 ,Disable the write/erase permission for page 211 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 18. " PAGE210 ,Disable the write/erase permission for page 210 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 17. " PAGE209 ,Disable the write/erase permission for page 209 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 16. " PAGE208 ,Disable the write/erase permission for page 208 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 15. " PAGE207 ,Disable the write/erase permission for page 207 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 14. " PAGE206 ,Disable the write/erase permission for page 206 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 13. " PAGE205 ,Disable the write/erase permission for page 205 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 12. " PAGE204 ,Disable the write/erase permission for page 204 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 11. " PAGE203 ,Disable the write/erase permission for page 203 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 10. " PAGE202 ,Disable the write/erase permission for page 202 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 9. " PAGE201 ,Disable the write/erase permission for page 201 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 8. " PAGE200 ,Disable the write/erase permission for page 200 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 7. " PAGE199 ,Disable the write/erase permission for page 199 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 6. " PAGE198 ,Disable the write/erase permission for page 198 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 5. " PAGE197 ,Disable the write/erase permission for page 197 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 4. " PAGE196 ,Disable the write/erase permission for page 196 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x18 3. " PAGE195 ,Disable the write/erase permission for page 195 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 2. " PAGE194 ,Disable the write/erase permission for page 194 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 1. " PAGE193 ,Disable the write/erase permission for page 193 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x18 0. " PAGE192 ,Disable the write/erase permission for page 192 of the main flash memory" "No,Yes"
|
|
line.long 0x1C "FLC_DISABLE_WE7,Disable Flash Page Write/Erase Register 6"
|
|
bitfld.long 0x1C 31. " PAGE255 ,Disable the write/erase permission for page 255 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 30. " PAGE254 ,Disable the write/erase permission for page 254 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 29. " PAGE253 ,Disable the write/erase permission for page 253 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 28. " PAGE252 ,Disable the write/erase permission for page 252 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 27. " PAGE251 ,Disable the write/erase permission for page 251 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 26. " PAGE250 ,Disable the write/erase permission for page 250 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 25. " PAGE249 ,Disable the write/erase permission for page 249 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 24. " PAGE248 ,Disable the write/erase permission for page 248 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 23. " PAGE247 ,Disable the write/erase permission for page 247 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 22. " PAGE246 ,Disable the write/erase permission for page 246 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 21. " PAGE245 ,Disable the write/erase permission for page 245 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 20. " PAGE244 ,Disable the write/erase permission for page 244 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 19. " PAGE243 ,Disable the write/erase permission for page 243 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 18. " PAGE242 ,Disable the write/erase permission for page 242 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 17. " PAGE241 ,Disable the write/erase permission for page 241 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 16. " PAGE240 ,Disable the write/erase permission for page 240 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 15. " PAGE239 ,Disable the write/erase permission for page 239 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 14. " PAGE238 ,Disable the write/erase permission for page 238 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 13. " PAGE237 ,Disable the write/erase permission for page 237 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 12. " PAGE236 ,Disable the write/erase permission for page 236 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 11. " PAGE235 ,Disable the write/erase permission for page 235 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 10. " PAGE234 ,Disable the write/erase permission for page 234 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 9. " PAGE233 ,Disable the write/erase permission for page 233 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 8. " PAGE232 ,Disable the write/erase permission for page 232 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 7. " PAGE231 ,Disable the write/erase permission for page 231 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 6. " PAGE230 ,Disable the write/erase permission for page 230 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 5. " PAGE229 ,Disable the write/erase permission for page 229 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 4. " PAGE228 ,Disable the write/erase permission for page 228 of the main flash memory" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x1C 3. " PAGE227 ,Disable the write/erase permission for page 227 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 2. " PAGE226 ,Disable the write/erase permission for page 226 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 1. " PAGE225 ,Disable the write/erase permission for page 225 of the main flash memory" "No,Yes"
|
|
bitfld.long 0x1C 0. " PAGE224 ,Disable the write/erase permission for page 224 of the main flash memory" "No,Yes"
|
|
width 0x0B
|
|
tree.end
|
|
tree "ICC (Instruction Cache Controller)"
|
|
base ad:0x40003000
|
|
width 15.
|
|
rgroup.long 0x00++0x07
|
|
line.long 0x00 "ICC_ID,Device ID Register"
|
|
bitfld.long 0x00 10.--15. " CACHE_ID ,Cache ID (Test only)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 6.--9. " PART_NUM ,Number ID (Test only)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 0.--5. " RTL_VERSION ,Version (Test only)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x04 "ICC_MEM_CFG,Memory Configuration"
|
|
hexmask.long.word 0x04 16.--31. 1. " MAIN_MEMORY_SIZE ,Internal flash memory size"
|
|
hexmask.long.word 0x04 0.--15. 1. " CACHE_SIZE ,Instruction cache size"
|
|
group.long 0x100++0x03
|
|
line.long 0x00 "ICC_CTRL_STAT,Control and Status"
|
|
rbitfld.long 0x00 16. " READY ,Cache ready status" "Not ready,Ready"
|
|
bitfld.long 0x00 0. " ENABLE ,Cache enable" "Disabled,Enabled"
|
|
wgroup.long 0x700++0x03
|
|
line.long 0x00 "ICC_INVDT_ALL,Invalidate (Clear) Cache Control"
|
|
width 0x0B
|
|
tree.end
|
|
tree "TRIM (TRIM)"
|
|
base ad:0x4000102C
|
|
width 22.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "TRIM_REG11_ADC_TRIM0,Shadow Trim for ADC R0"
|
|
hexmask.long.word 0x00 16.--25. 1. " ADCTRIM_X1R0 ,Shadow Trim for ADC R1"
|
|
hexmask.long.word 0x00 0.--9. 1. " ADCTRIM_X0R0 ,Gain error trim X0 R0"
|
|
line.long 0x04 "TRIM_REG12_ADC_TRIM1,TRIM_REG12_ADC_TRIM1"
|
|
bitfld.long 0x04 28.--31. " ADCTRIM_DC ,Offset error trim" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
hexmask.long.word 0x04 16.--25. 1. " ADCTRIM_X1R1 ,Gain error trim X1 R1"
|
|
hexmask.long.word 0x04 0.--9. 1. " ADCTRIM_X0R1 ,Gain error trim X0 R1"
|
|
rgroup.long 0x08++0x0B
|
|
line.long 0x00 "TRIM_FOR_PWR_REG5,Shadow Trim for PWRSEQ Register REG5"
|
|
line.long 0x04 "TRIM_FOR_PWR_REG6,Shadow Trim for PWRSEQ Register REG6"
|
|
line.long 0x08 "TRIM_FOR_PWR_REG7,Shadow Trim for PWRSEQ Register REG7"
|
|
width 0x0B
|
|
tree.end
|
|
tree "PWRSEQ (Power Sequencer)"
|
|
base ad:0x40000A30
|
|
width 26.
|
|
group.long 0x00++0x1F
|
|
line.long 0x00 "PWRSEQ_REG0,Power Sequencer Control Register 0"
|
|
bitfld.long 0x00 31. " PWR_OSC_SELECT ,Selects main clock source - 96MHz RO or 4MHz RC" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " PWR_RCEN_SLP ,Enable 4MHz RC oscillator operation during sleep mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 29. " PWR_RCEN_RUN ,Enable 4MHz RC oscillator operation during run mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 28. " PWR_TVDD12_SWEN_SLP ,Enable TVDD12 power switch during sleep mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 27. " PWR_TVDD12_SWEN_RUN ,Enable TVDD12 power switch during run mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 26. " PWR_VDD18_SWEN_SLP ,Enable VDD18 power switch during sleep mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 25. " PWR_VDD18_SWEN_RUN ,Enable VDD18 power switch during run mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 24. " PWR_VDD12_SWEN_SLP ,Enable VDD12 power switch during sleep mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 23. " PWR_VDD12_SWEN_RUN ,Enable VDD12 power switch during run mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " PWR_SVMTVDD12EN_RUN ,Enable TVDD12 SVM operation during run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19. " PWR_SVM_VDDB_RUN ,Enable VDDB SVM operation during run mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " PWR_SVMRTCEN_RUN ,Enable VRTC SVM operation during run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " PWR_SVM18EN_RUN ,Enable VDD18_SW SVM operation during run mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " PWR_SVM12EN_RUN ,Enable VDD12_SW SVM operation during run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 12. " PWR_RTCEN_SLP ,Enable real time clock operation during sleep mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 11. " PWR_RTCEN_RUN ,Enable real Time clock operation during run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 10. " PWR_NREN_SLP ,Enable nano oscillator in sleep mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " PWR_NREN_RUN ,Enable nano oscillator in run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 8. " PWR_ROEN_SLP ,Enable 96MHz system relaxation oscillator in sleep mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 7. " PWR_ROEN_RUN ,Enable 96MHz system relaxation oscillator in run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 6. " PWR_RETREGEN_SLP ,Enable retention regulator operation during sleep mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PWR_RETREGEN_RUN ,Enable retention regulator operation during run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 4. " PWR_FLASHEN_SLP ,Enable flash operation during sleep mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " PWR_FLASHEN_RUN ,Enable flash operation during run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " PWR_SYS_REBOOT ,Firmware system reboot request" "No effect,Reboot"
|
|
bitfld.long 0x00 1. " PWR_FIRST_BOOT ,Wake on first boot" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " PWR_LP1 ,Shutdown power mode select" "LP0:STOP,LP1:STANDBY"
|
|
line.long 0x04 "PWRSEQ_REG1,Power Sequencer Control Register 1"
|
|
bitfld.long 0x04 19. " PWR_LP1_CORE_RSTN_EN ,Enables core RSTN to toggle during LP1" "Disabled,Enabled"
|
|
bitfld.long 0x04 18. " PWR_LP0_CORE_RESUME_EN ,Enables core resume to toggle during LP0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 17. " PWR_VDDIOH_EN_ISO_POR ,Enables VDDIOH isolation POR" "Disabled,Enabled"
|
|
bitfld.long 0x04 16. " PWR_VDDIO_EN_ISO_POR ,Enables VDDIO isolation POR" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 14. " PWR_RETREG_SRC_V18 ,Enables VDD18 rail as retention power supply" "Disabled,Enabled"
|
|
bitfld.long 0x04 13. " PWR_RETREG_SRC_VRTC ,Enables VRTC rail as retention power supply" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 12. " PWR_RETREG_SRC_V12 ,Enables VDD12 rail as retention power supply" "Disabled,Enabled"
|
|
bitfld.long 0x04 10. " PWR_SVM_VDDIOH_EN_RUN ,Enables SVM for VDDIOH_SW during run mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 8. " PWR_SVM_VDDIO_EN_RUN ,Enables SVM for VDDIO_SW during run Mode" "Disabled,Enabled"
|
|
bitfld.long 0x04 6. " PWR_AUTO_MBUS_GATE ,Automatically set/clear GPIO MBus gate" "Register based,Automatic"
|
|
textline " "
|
|
bitfld.long 0x04 5. " PWR_SRAM_NWELL_SW ,SRAM/Cache well switch" "VDD12,TVDD12"
|
|
bitfld.long 0x04 4. " PWR_TVDD12_WELL ,TVDD12 well switch" "VDD12,TVDD12"
|
|
textline " "
|
|
bitfld.long 0x04 3. " PWR_DISCHARGE_EN ,Enable flash discharge during powerfail event" "Disabled,Enabled"
|
|
bitfld.long 0x04 2. " PWR_MBUS_GATE ,Freeze GPIO MBus state" "Not frozen,Frozen"
|
|
textline " "
|
|
bitfld.long 0x04 1. " PWR_CLR_IO_CFG_LATCH ,Clear all GPIO configuration latches" "Not cleared,Cleared"
|
|
bitfld.long 0x04 0. " PWR_CLR_IO_EVENT_LATCH ,Clear all GPIO event seen latches" "Not cleared,Cleared"
|
|
line.long 0x08 "PWRSEQ_REG2,Power Sequencer Control Register 2"
|
|
bitfld.long 0x08 12.--13. " PWR_VDDIOH_HYST ,VDDIOH comparator hysteresis setting SS (mV)" "0,12.5,25,50"
|
|
bitfld.long 0x08 10.--11. " PWR_VDDIO_HYST ,VDDIO comparator hysteresis setting (mV)" "0,12.5,25,50"
|
|
textline " "
|
|
bitfld.long 0x08 8.--9. " PWR_TVDD12_HYST ,TVDD12 comparator hysteresis setting (mV)" "0,12.5,25,50"
|
|
bitfld.long 0x08 6.--7. " PWR_VDDB_HYST ,VDDB comparator hysteresis setting (mV)" "0,12.5,25,50"
|
|
textline " "
|
|
bitfld.long 0x08 4.--5. " PWR_VRTC_HYST ,VRTC comparator hysteresis setting (mV)" "0,12.5,25,50"
|
|
bitfld.long 0x08 2.--3. " PWR_VDD18_HYST ,VDD18_SW comparator hysteresis setting (mV)" "0,12.5,25,50"
|
|
textline " "
|
|
bitfld.long 0x08 0.--1. " PWR_VDD12_HYST ,VDD12_SW comparator hysteresis setting (mV)" "0,12.5,25,50"
|
|
line.long 0x0C "PWRSEQ_REG3,Power Sequencer Control Register 3"
|
|
bitfld.long 0x0C 20.--21. " PWR_RC_DIV ,Frequency divider for 4MHz RC oscillator" "/1,/2,/4,/8"
|
|
bitfld.long 0x0C 16.--18. " PWR_RO_DIV ,Frequency divider for 96MHz relaxation oscillator" "/1,/2,/4,/8,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 10.--12. " PWR_FAILSEL ,Timeout before rebooting during PowerFail/BootFail events (ms)" "No delay,8,16,32,64,128,256,512"
|
|
bitfld.long 0x0C 8.--9. " PWR_RO_CLK_MUX ,Relaxation clock mux" "Relaxation oscillator,External clock,Nanoring,RTC clock"
|
|
textline " "
|
|
bitfld.long 0x0C 6.--7. " PWR_SVM_CLK_MUX ,SVM clock mux" "Nanoring,RTC clock,Relaxation oscillator,External clock"
|
|
bitfld.long 0x0C 3.--5. " PWR_FLTRROSEL ,Power supply filter timeout for wakeup (clocks)" "No delay,4,8,16,32,64,128,256"
|
|
textline " "
|
|
bitfld.long 0x0C 0.--2. " PWR_ROSEL ,Relaxation oscillator stable timeout for wakeup (clocks)" "No delay,4,8,16,32,64,128,256"
|
|
line.long 0x10 "PWRSEQ_REG4,Power Sequencer Control Register 4 (Internal Test Only)"
|
|
bitfld.long 0x10 10. " PWR_USB_XVR_TST_EN ,Internal use only (Test only)" "0,1"
|
|
bitfld.long 0x10 9. " PWR_RETREG_TRIM_LP1_EN ,Internal use only (Test only)" "0,1"
|
|
textline " "
|
|
bitfld.long 0x10 8. " PWR_RTC_MUX ,Internal use only (Test only)" "0,1"
|
|
bitfld.long 0x10 7. " PWR_PSEQ_32K_EN ,Internal use only (Test only)" "0,1"
|
|
textline " "
|
|
bitfld.long 0x10 6. " PWR_EXT_CLK_IN_EN ,Internal use only (Test only)" "0,1"
|
|
bitfld.long 0x10 5. " PWR_NR_CLK_GATE_EN ,Internal use only (Test only)" "0,1"
|
|
textline " "
|
|
bitfld.long 0x10 4. " PWR_RO_TSTCLK_EN ,Internal use only (Test only)" "0,1"
|
|
bitfld.long 0x10 3. " PWR_USB_DIS_COMP ,Internal use only (Test only)" "0,1"
|
|
textline " "
|
|
bitfld.long 0x10 1. " PWR_TM_FAST_TIMERS ,Internal use only (Test only)" "0,1"
|
|
bitfld.long 0x10 0. " PWR_TM_PS_2_GPIO ,Internal use only (Test only)" "0,1"
|
|
line.long 0x14 "PWRSEQ_REG5,Power Sequencer Control Register 5 (Trim 0)"
|
|
bitfld.long 0x14 25.--26. " PWR_TRIM_RETREG_7_6 ,Retention regulator trim setting (Bits 7:6)" "0,1,2,3"
|
|
bitfld.long 0x14 21.--24. " PWR_RTC_TRIM ,Real time clock trim setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x14 15.--20. " PWR_TRIM_RETREG_5_0 ,Retention regulator trim setting (Bits 5:0)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x14 9.--14. " PWR_TRIM_BIAS ,Power manager bias current trim setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
textline " "
|
|
hexmask.long.word 0x14 0.--8. 1. " PWR_TRIM_SVM_BG ,Power manager bandgap trim setting"
|
|
line.long 0x18 "PWRSEQ_REG6,Power Sequencer Control Register 6 (Trim 1)"
|
|
hexmask.long.word 0x18 20.--28. 1. " PWR_TRIM_CRYPTO_OSC ,Crypto oscillator trim setting"
|
|
hexmask.long.word 0x18 11.--19. 1. " PWR_TRIM_OSC_VREF ,Relaxation oscillator trim setting"
|
|
textline " "
|
|
bitfld.long 0x18 7.--10. " PWR_TRIM_USB_DM_RES ,USB data minus slew rate trim setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x18 3.--6. " PWR_TRIM_USB_PM_RES ,USB data plus slew rate trim setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
bitfld.long 0x18 0.--2. " PWR_TRIM_USB_BIAS ,USB bias current trim setting" "0,1,2,3,4,5,6,7"
|
|
line.long 0x1C "PWRSEQ_REG7,Power Sequencer Control Register 7 (Trim 2)"
|
|
hexmask.long.word 0x1C 16.--31. 1. " PWR_TRIM_RC ,Trim setting for 4MHz internal RC oscillator"
|
|
rbitfld.long 0x1C 0. " PWR_FLASH_PD_LOOKAHEAD ,Flash powerdown lookahead flag" "Powered on,Powered down"
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "PWRSEQ_FLAGS,Power Sequencer Flags"
|
|
eventfld.long 0x00 24. " PWR_WATCHDOG_RSTN_FLAG ,Power sequencer reset triggered by WDT2 flag" "Not detected,Detected"
|
|
eventfld.long 0x00 23. " PWR_NANORING_WAKEUP_FLAG ,Wakeup triggered by WDT2 flag" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 22. " PWR_ISOZ_VDDIOH_FAIL ,VDDIOH isolation POR tripped" "Not detected,Detected"
|
|
eventfld.long 0x00 21. " PWR_ISOZ_VDDIO_FAIL ,VDDIO isolation POR tripped" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 20. " PWR_VDDIOH_RST_BAD ,VDDIOH comparator tripped" "Not detected,Detected"
|
|
eventfld.long 0x00 19. " PWR_VDDIO_RST_BAD ,VDDIO comparator tripped" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 18. " PWR_TVDD12_BAD ,Retention regulator POR tripped event detected flag" "Not detected,Detected"
|
|
eventfld.long 0x00 17. " PWR_USB_REMOVE_WAKEUP ,USB power remove wakeup event detected flag" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 16. " PWR_USB_PLUG_WAKEUP ,USB power connect wakeup event detected flag" "Not detected,Detected"
|
|
rbitfld.long 0x00 15. " RTC_ROLLOVER ,RTC rollover event detected flag" "Not detected,Detected"
|
|
textline " "
|
|
rbitfld.long 0x00 14. " RTC_PRESCALE_CMP ,RTC prescale comparator match event detected flag" "Not detected,Detected"
|
|
rbitfld.long 0x00 13. " RTC_CMPR1 ,RTC comparator 1 match event detected flag" "Not detected,Detected"
|
|
textline " "
|
|
rbitfld.long 0x00 12. " RTC_CMPR0 ,RTC comparator 0 match event detected flag" "Not detected,Detected"
|
|
eventfld.long 0x00 11. " PWR_POR18Z_FAIL_LATCH ,POR18 and POR18_bg tripped" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 10. " PWR_TVDD12_RST_BAD ,TVDD12 comparator tripped event detected flag" "Not detected,Detected"
|
|
eventfld.long 0x00 9. " PWR_VDDB_RST_BAD ,VDDB comparator tripped event detected flag" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 8. " PWR_VRTC_RST_BAD ,VRTC comparator tripped event detected flag" "Not detected,Detected"
|
|
eventfld.long 0x00 7. " PWR_VDD18_RST_BAD ,VDD18_SW comparator tripped event detected flag" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 6. " PWR_VDD12_RST_BAD ,VDD12_SW comparator tripped event detected flag" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PWR_IOWAKEUP ,GPIO wakeup event detected flag" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 4. " PWR_FLASH_DISCHARGE ,Flash discharged during powerfail event detected flag" "Not detected,Detected"
|
|
eventfld.long 0x00 3. " PWR_BOOT_FAIL ,Boot fail event detected flag" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 2. " PWR_POWER_FAIL ,Power fail event detected flag" "Not detected,Detected"
|
|
rbitfld.long 0x00 1. " PWR_SYS_REBOOT ,Firmware reset event detected flag" "Not detected,Detected"
|
|
textline " "
|
|
rbitfld.long 0x00 0. " PWR_FIRST_BOOT ,Initial boot event detected flag" "Not detected,Detected"
|
|
if (((per.l(ad:0x40000A30+0x38))&0x01)==0x00)
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "PWRSEQ_MSK_FLAGS,Power Sequencer Flags Mask Register"
|
|
bitfld.long 0x00 24. " PWR_WATCHDOG_RSTN_FLAG ,Mask for WDT2 PWRSEQ reset (internal RSTN) event" "Masked,Not masked"
|
|
bitfld.long 0x00 23. " PWR_NANORING_WAKEUP_FLAG ,Mask for WDT2 wakeup event" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 22. " PWR_ISOZ_VDDIOH_FAIL ,Mask for VDDIOH isolation POR" "Masked,Not masked"
|
|
bitfld.long 0x00 21. " PWR_ISOZ_VDDIO_FAIL ,Mask for VDDIO isolation POR" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 20. " PWR_VDDIOH_RST_BAD ,Mask for VDDIOH comparator" "Masked,Not masked"
|
|
bitfld.long 0x00 19. " PWR_VDDIO_RST_BAD ,Mask for VDDIO comparator" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 18. " PWR_TVDD12_BAD ,Mask for TVDD12 power fail event" "Not masked,Masked"
|
|
bitfld.long 0x00 17. " PWR_USB_REMOVE_WAKEUP ,Mask for USB plug disconnect event" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 16. " PWR_USB_PLUG_WAKEUP ,Mask for USB plug connect event" "Masked,Not masked"
|
|
bitfld.long 0x00 15. " RTC_ROLLOVER ,Mask for RTC rollover event" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 14. " RTC_PRESCALE_CMP ,Mask for RTC prescale compare event" "Not masked,Masked"
|
|
bitfld.long 0x00 13. " RTC_CMPR1 ,Mask for RTC compare 1 event" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 12. " RTC_CMPR0 ,Mask for RTC compare 0 event" "Not masked,Masked"
|
|
bitfld.long 0x00 11. " PWR_POR18Z_FAIL_LATCH ,Mask for POR18 powerfail event" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 10. " PWR_TVDD12_RST_BAD ,Mask for TVDD12 rst event" "Not masked,Masked"
|
|
bitfld.long 0x00 9. " PWR_VDDB_RST_BAD ,Mask for VDDB rst event" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 8. " PWR_VRTC_RST_BAD ,Mask for VRTC rst event" "Not masked,Masked"
|
|
bitfld.long 0x00 7. " PWR_VDD18_RST_BAD ,Mask for VDD18 rst event" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 6. " PWR_VDD12_RST_BAD ,Mask for VDD12 rst event" "Not masked,Masked"
|
|
bitfld.long 0x00 5. " PWR_IOWAKEUP ,Mask for GPIO wakeup event detect" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 4. " PWR_FLASH_DISCHARGE ,Mask for flash discharge event" "Not masked,Masked"
|
|
bitfld.long 0x00 3. " PWR_BOOT_FAIL ,Mask for previous boot fail detect" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 2. " PWR_POWER_FAIL ,Mask for previous power fail detect" "Not masked,Masked"
|
|
bitfld.long 0x00 1. " PWR_SYS_REBOOT ,Mask for system reboot detect" "Not masked,Masked"
|
|
else
|
|
group.long 0x24++0x03
|
|
line.long 0x00 "PWRSEQ_MSK_FLAGS,Power Sequencer Flags Mask Register"
|
|
bitfld.long 0x00 24. " PWR_WATCHDOG_RSTN_FLAG ,Mask for WDT2 PWRSEQ reset (internal RSTN) event" "Masked,Not masked"
|
|
bitfld.long 0x00 23. " PWR_NANORING_WAKEUP_FLAG ,Mask for WDT2 wakeup event" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 22. " PWR_ISOZ_VDDIOH_FAIL ,Mask for VDDIOH isolation POR" "Masked,Not masked"
|
|
bitfld.long 0x00 21. " PWR_ISOZ_VDDIO_FAIL ,Mask for VDDIO isolation POR" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 20. " PWR_VDDIOH_RST_BAD ,Mask for VDDIOH comparator" "Masked,Not masked"
|
|
bitfld.long 0x00 19. " PWR_VDDIO_RST_BAD ,Mask for VDDIO comparator" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 18. " PWR_TVDD12_BAD ,Mask for TVDD12 power fail event" "Not masked,Masked"
|
|
bitfld.long 0x00 17. " PWR_USB_REMOVE_WAKEUP ,Mask for USB plug disconnect event" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 16. " PWR_USB_PLUG_WAKEUP ,Mask for USB plug connect event" "Masked,Not masked"
|
|
bitfld.long 0x00 15. " RTC_ROLLOVER ,Mask for RTC rollover event" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 14. " RTC_PRESCALE_CMP ,Mask for RTC prescale compare event" "Masked,Not masked"
|
|
bitfld.long 0x00 13. " RTC_CMPR1 ,Mask for RTC compare 1 event" "Masked,Not masked"
|
|
textline " "
|
|
bitfld.long 0x00 12. " RTC_CMPR0 ,Mask for RTC compare 0 event" "Masked,Not masked"
|
|
bitfld.long 0x00 11. " PWR_POR18Z_FAIL_LATCH ,Mask for POR18 powerfail event" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 10. " PWR_TVDD12_RST_BAD ,Mask for TVDD12 rst event" "Not masked,Masked"
|
|
bitfld.long 0x00 9. " PWR_VDDB_RST_BAD ,Mask for VDDB rst event" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 8. " PWR_VRTC_RST_BAD ,Mask for VRTC rst event" "Not masked,Masked"
|
|
bitfld.long 0x00 7. " PWR_VDD18_RST_BAD ,Mask for VDD18 rst event" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 6. " PWR_VDD12_RST_BAD ,Mask for VDD12 rst event" "Not masked,Masked"
|
|
bitfld.long 0x00 5. " PWR_IOWAKEUP ,Mask for GPIO wakeup event detect" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 4. " PWR_FLASH_DISCHARGE ,Mask for flash discharge event" "Not masked,Masked"
|
|
bitfld.long 0x00 3. " PWR_BOOT_FAIL ,Mask for previous boot fail detect" "Not masked,Masked"
|
|
textline " "
|
|
bitfld.long 0x00 2. " PWR_POWER_FAIL ,Mask for previous power fail detect" "Not masked,Masked"
|
|
bitfld.long 0x00 1. " PWR_SYS_REBOOT ,Mask for system reboot detect" "Not masked,Masked"
|
|
endif
|
|
group.long 0x2C++0x03
|
|
line.long 0x00 "PWRSEQ_WR_PROTECT,Critical Setting Write Protect Register"
|
|
rbitfld.long 0x00 31. " WP ,Critical setting write protect" "Not protected,Protected"
|
|
rbitfld.long 0x00 30. " BYPASS ,Write protect bypass" "Not bypassed,Bypassed"
|
|
textline " "
|
|
rbitfld.long 0x00 29. " INFO ,Write protect from info block" "No,Yes"
|
|
rbitfld.long 0x00 28. " RTC ,Write protect from RTC" "No,Yes"
|
|
textline " "
|
|
hexmask.long.byte 0x00 8.--15. 1. " RTC_SEQ ,Write protect RTC sequence write"
|
|
hexmask.long.byte 0x00 0.--7. 1. " BYPASS_SEQ ,Write protect bypass sequence write"
|
|
group.long 0x30++0x0F
|
|
line.long 0x00 "PWRSEQ_RETN_CTRL0,Retention Control Register 0"
|
|
bitfld.long 0x00 3. " RC_POLL_FLASH ,Enable automatic flash polling for wakeup" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " RC_USE_FLC_TWK ,Enable flash controller TWake timer" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " RC_REL_CCG_EARLY ,Early core clock gate release" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " RETN_CTRL_EN ,Retention controller enable" "Disabled,Enabled"
|
|
line.long 0x04 "PWRSEQ_RETN_CTRL1,Retention Control Register 1"
|
|
bitfld.long 0x04 0.--3. " RC_TWK ,Retention controller TWake cycle count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x08 "PWRSEQ_PWR_MISC,Power Misc Controls"
|
|
bitfld.long 0x08 0. " INVERT_4_MASK_BITS ,Invert sense of power mask flags for RTC" "Not inverted,Inverted"
|
|
line.long 0x0C "PWRSEQ_RTC_CTRL2,RTC Misc Controls"
|
|
hexmask.long.byte 0x0C 24.--31. 1. " CFG_LOCK ,CFG_LOCK"
|
|
bitfld.long 0x0C 3. " SSB_PERFORMANCE ,SSB_PERFORMANCE" "0,1"
|
|
textline " "
|
|
bitfld.long 0x0C 2. " TIMER_AUTO_UPDATE ,TIMER_AUTO_UPDATE" "0,1"
|
|
bitfld.long 0x0C 1. " TIMER_ASYNC_WR ,TIMER_ASYNC_WR" "0,1"
|
|
textline " "
|
|
bitfld.long 0x0C 0. " TIMER_ASYNC_RD ,TIMER_ASYNC_RD" "0,1"
|
|
width 0x0B
|
|
tree.end
|
|
tree "PWRMAN (Power Manager)"
|
|
base ad:0x40000800
|
|
width 25.
|
|
group.long 0x00++0x0B
|
|
line.long 0x00 "PWRMAN_PWR_RST_CTRL,Power Reset Control and Status"
|
|
bitfld.long 0x00 31. " LOW_POWER_MODE ,Power manager dynamic clock gating enable" "Disabled,Enabled"
|
|
rbitfld.long 0x00 22. " POR ,Reset caused by power on reset (POR)" "No,Yes"
|
|
rbitfld.long 0x00 21. " SRSTN_ASSERTION ,Reset caused by external system reset" "No,Yes"
|
|
textline " "
|
|
rbitfld.long 0x00 20. " FW_COMMAND_SYSMAN ,Reset caused by firmware commanded reset (sys-man)" "No,Yes"
|
|
rbitfld.long 0x00 19. " WATCHDOG_TIMEOUT ,Reset caused by watchdog timeout" "No,Yes"
|
|
rbitfld.long 0x00 18. " FW_COMMAND_ARM ,Reset caused by firmware commanded reset (ARM core)" "No,Yes"
|
|
textline " "
|
|
rbitfld.long 0x00 17. " ARM_LOCKUP ,Reset caused by-ARM Lockup" "No,Yes"
|
|
rbitfld.long 0x00 16. " TAMPER_DETECT ,Reset caused by-tamper detect" "No,Yes"
|
|
bitfld.long 0x00 9. " ARM_LOCKUP_RESET ,ARM lockup reset" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 8. " FIRMWARE_RESET ,Firmware initiated reset" "No reset,Reset"
|
|
bitfld.long 0x00 5. " PULLUPS_ENABLED ,Static pullups enabled" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " USB_POWERED ,USB powered (powers on the USB block)" "Powered off,Powered on"
|
|
textline " "
|
|
bitfld.long 0x00 3. " IO_ACTIVE ,I/O active (power state)" "Lowest,Normally"
|
|
bitfld.long 0x00 2. " AFE_POWERED ,AFE powered" "Powered off,Powered on"
|
|
line.long 0x04 "PWRMAN_INTFL,Interrupt Flags"
|
|
eventfld.long 0x04 6. " VDDIOH_WARNING ,VDDIOH warning monitor int flag" "Not detected,Detected"
|
|
eventfld.long 0x04 5. " VDDIO_WARNING ,VDDIO warning monitor int flag" "Not detected,Detected"
|
|
eventfld.long 0x04 4. " VDDB_WARNING ,VDDB warning monitor int flag" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x04 3. " VDDA_WARNING ,VDDA warning monitor int flag" "Not detected,Detected"
|
|
eventfld.long 0x04 2. " RTC_WARNING ,RTC warning monitor int flag" "Not detected,Detected"
|
|
eventfld.long 0x04 1. " V1_8_WARNING ,1.8V warning monitor int flag" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x04 0. " V1_2_WARNING ,1.2V warning monitor int flag" "Not detected,Detected"
|
|
line.long 0x08 "PWRMAN_INTEN,Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x08 6. " VDDIOH_WARNING ,VDDIOH warning monitor interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 5. " VDDIO_WARNING ,VDDIO warning monitor interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 4. " VDDB_WARNING ,VDDB warning monitor interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 3. " VDDA_WARNING ,VDDA warning monitor interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 2. " RTC_WARNING ,VRTC warning monitor interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " V1_8_WARNING ,1.8V warning monitor interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 0. " V1_2_WARNING ,1.2V warning monitor interrupt enable" "Disabled,Enabled"
|
|
rgroup.long 0x0C++0x03
|
|
line.long 0x00 "PWRMAN_SVM_EVENTS,SVM Event Status Flags"
|
|
bitfld.long 0x00 6. " VDDIOH_WARNING ,VDDIOH warning monitor event input" "0,1"
|
|
bitfld.long 0x00 5. " VDDIO_WARNING ,VDDIO warning monitor event input" "0,1"
|
|
bitfld.long 0x00 4. " VDDB_WARNING ,VDDB warning monitor event input" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " VDDA_WARNING ,VDDA warning monitor event input" "0,1"
|
|
bitfld.long 0x00 2. " RTC_WARNING ,RTC warning monitor event input" "0,1"
|
|
bitfld.long 0x00 1. " V1_8_WARNING ,1.8V warning monitor event input" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 0. " V1_2_WARNING ,1.2V warning monitor event input" "0,1"
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "PWRMAN_WUD_CTRL,Wake-Up Detect Control"
|
|
bitfld.long 0x00 16. " CTRL_ENABLE ,Enable WUD control modification" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " CLEAR_ALL ,Clear all WUD pad states" "Not cleared,Cleared"
|
|
bitfld.long 0x00 8.--9. " PAD_MODE ,Wake-Up pad signal mode (define WUD signal to be sent to selected pad)" "Clear/Activate,Act Hi/Act Lo,Weak Hi/Weak Lo,No change"
|
|
textline " "
|
|
hexmask.long.byte 0x00 0.--6. 1. " PAD_SELECT ,Wake-Up pad select"
|
|
wgroup.long 0x14++0x07
|
|
line.long 0x00 "PWRMAN_WUD_PULSE0,WUD Pulse To Mode Bit 0"
|
|
line.long 0x04 "PWRMAN_WUD_PULSE1,WUD Pulse To Mode Bit 1"
|
|
rgroup.long 0x1C++0x0B
|
|
line.long 0x00 "PWRMAN_WUD_SEEN0,Wake-up Detect Status for P0/P1/P2/P3"
|
|
bitfld.long 0x00 31. " GPIO31 ,Wake-Up detect status for P3.7" "Not detected,Detected"
|
|
bitfld.long 0x00 30. " GPIO30 ,Wake-Up detect status for P3.6" "Not detected,Detected"
|
|
bitfld.long 0x00 29. " GPIO29 ,Wake-Up detect status for P3.5" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 28. " GPIO28 ,Wake-Up detect status for P3.4" "Not detected,Detected"
|
|
bitfld.long 0x00 27. " GPIO27 ,Wake-Up detect status for P3.3" "Not detected,Detected"
|
|
bitfld.long 0x00 26. " GPIO26 ,Wake-Up detect status for P3.2" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 25. " GPIO25 ,Wake-Up detect status for P3.1" "Not detected,Detected"
|
|
bitfld.long 0x00 24. " GPIO24 ,Wake-Up detect status for P3.0" "Not detected,Detected"
|
|
bitfld.long 0x00 23. " GPIO23 ,Wake-Up detect status for P2.7" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 22. " GPIO22 ,Wake-Up detect status for P2.6" "Not detected,Detected"
|
|
bitfld.long 0x00 21. " GPIO21 ,Wake-Up detect status for P2.5" "Not detected,Detected"
|
|
bitfld.long 0x00 20. " GPIO20 ,Wake-Up detect status for P2.4" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 19. " GPIO19 ,Wake-Up detect status for P2.3" "Not detected,Detected"
|
|
bitfld.long 0x00 18. " GPIO18 ,Wake-Up detect status for P2.2" "Not detected,Detected"
|
|
bitfld.long 0x00 17. " GPIO17 ,Wake-Up detect status for P2.1" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 16. " GPIO16 ,Wake-Up detect status for P2.0" "Not detected,Detected"
|
|
bitfld.long 0x00 15. " GPIO15 ,Wake-Up detect status for P1.7" "Not detected,Detected"
|
|
bitfld.long 0x00 14. " GPIO14 ,Wake-Up detect status for P1.6" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 13. " GPIO13 ,Wake-Up detect status for P1.5" "Not detected,Detected"
|
|
bitfld.long 0x00 12. " GPIO12 ,Wake-Up detect status for P1.4" "Not detected,Detected"
|
|
bitfld.long 0x00 11. " GPIO11 ,Wake-Up detect status for P1.3" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 10. " GPIO10 ,Wake-Up detect status for P1.2" "Not detected,Detected"
|
|
bitfld.long 0x00 9. " GPIO9 ,Wake-Up detect status for P1.1" "Not detected,Detected"
|
|
bitfld.long 0x00 8. " GPIO8 ,Wake-Up detect status for P1.0" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 7. " GPIO7 ,Wake-Up detect status for P0.7" "Not detected,Detected"
|
|
bitfld.long 0x00 6. " GPIO6 ,Wake-Up detect status for P0.6" "Not detected,Detected"
|
|
bitfld.long 0x00 5. " GPIO5 ,Wake-Up detect status for P0.5" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 4. " GPIO4 ,Wake-Up detect status for P0.4" "Not detected,Detected"
|
|
bitfld.long 0x00 3. " GPIO3 ,Wake-Up detect status for P0.3" "Not detected,Detected"
|
|
bitfld.long 0x00 2. " GPIO2 ,Wake-Up detect status for P0.2" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x00 1. " GPIO1 ,Wake-Up detect status for P0.1" "Not detected,Detected"
|
|
bitfld.long 0x00 0. " GPIO0 ,Wake-Up detect status for P0.0" "Not detected,Detected"
|
|
line.long 0x04 "PWRMAN_WUD_SEEN1,Wake-up Detect Status for P4/P5/P6/P7"
|
|
bitfld.long 0x04 31. " GPIO63 ,Wake-Up detect status for P7.7" "Not detected,Detected"
|
|
bitfld.long 0x04 30. " GPIO62 ,Wake-Up detect status for P7.6" "Not detected,Detected"
|
|
bitfld.long 0x04 29. " GPIO61 ,Wake-Up detect status for P7.5" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 28. " GPIO60 ,Wake-Up detect status for P7.4" "Not detected,Detected"
|
|
bitfld.long 0x04 27. " GPIO59 ,Wake-Up detect status for P7.3" "Not detected,Detected"
|
|
bitfld.long 0x04 26. " GPIO58 ,Wake-Up detect status for P7.2" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 25. " GPIO57 ,Wake-Up detect status for P7.1" "Not detected,Detected"
|
|
bitfld.long 0x04 24. " GPIO56 ,Wake-Up detect status for P7.0" "Not detected,Detected"
|
|
bitfld.long 0x04 23. " GPIO55 ,Wake-Up detect status for P6.7" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 22. " GPIO54 ,Wake-Up detect status for P6.6" "Not detected,Detected"
|
|
bitfld.long 0x04 21. " GPIO53 ,Wake-Up detect status for P6.5" "Not detected,Detected"
|
|
bitfld.long 0x04 20. " GPIO52 ,Wake-Up detect status for P6.4" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 19. " GPIO51 ,Wake-Up detect status for P6.3" "Not detected,Detected"
|
|
bitfld.long 0x04 18. " GPIO50 ,Wake-Up detect status for P6.2" "Not detected,Detected"
|
|
bitfld.long 0x04 17. " GPIO49 ,Wake-Up detect status for P6.1" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 16. " GPIO48 ,Wake-Up detect status for P6.0" "Not detected,Detected"
|
|
bitfld.long 0x04 15. " GPIO47 ,Wake-Up detect status for P5.7" "Not detected,Detected"
|
|
bitfld.long 0x04 14. " GPIO46 ,Wake-Up detect status for P5.6" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 13. " GPIO45 ,Wake-Up detect status for P5.5" "Not detected,Detected"
|
|
bitfld.long 0x04 12. " GPIO44 ,Wake-Up detect status for P5.4" "Not detected,Detected"
|
|
bitfld.long 0x04 11. " GPIO43 ,Wake-Up detect status for P5.3" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 10. " GPIO42 ,Wake-Up detect status for P5.2" "Not detected,Detected"
|
|
bitfld.long 0x04 9. " GPIO41 ,Wake-Up detect status for P5.1" "Not detected,Detected"
|
|
bitfld.long 0x04 8. " GPIO40 ,Wake-Up detect status for P5.0" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 7. " GPIO39 ,Wake-Up detect status for P4.7" "Not detected,Detected"
|
|
bitfld.long 0x04 6. " GPIO38 ,Wake-Up detect status for P4.6" "Not detected,Detected"
|
|
bitfld.long 0x04 5. " GPIO37 ,Wake-Up detect status for P4.5" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 4. " GPIO36 ,Wake-Up detect status for P4.4" "Not detected,Detected"
|
|
bitfld.long 0x04 3. " GPIO35 ,Wake-Up detect status for P4.3" "Not detected,Detected"
|
|
bitfld.long 0x04 2. " GPIO34 ,Wake-Up detect status for P4.2" "Not detected,Detected"
|
|
textline " "
|
|
bitfld.long 0x04 1. " GPIO33 ,Wake-Up detect status for P4.1" "Not detected,Detected"
|
|
bitfld.long 0x04 0. " GPIO32 ,Wake-Up detect status for P4.0" "Not detected,Detected"
|
|
line.long 0x08 "PWRMAN_WUD_SEEN2,Wake-up Detect Status for P8"
|
|
bitfld.long 0x08 1. " GPIO65 ,Wake-Up detect status for P8.1" "Not detected,Detected"
|
|
bitfld.long 0x08 0. " GPIO64 ,Wake-Up detect status for P8.0" "Not detected,Detected"
|
|
group.long 0x30++0x03
|
|
line.long 0x00 "PWRMAN_PT_REGMAP_CTRL,PT Register Mapping Control"
|
|
bitfld.long 0x00 0. " ME02A_MODE ,ME02a mode (mapping of the pulse train registers)" "Disabled,Enabled"
|
|
rgroup.long 0x38++0x0B
|
|
line.long 0x00 "PWRMAN_DIE_TYPE,Die Type ID Register"
|
|
line.long 0x04 "PWRMAN_BASE_PART_NUM,Base Part Number"
|
|
hexmask.long.word 0x04 0.--15. 1. " BASE_PART_NUMBER ,Base part number"
|
|
line.long 0x08 "PWRMAN_MASK_ID0,Mask ID Register 0"
|
|
hexmask.long 0x08 4.--31. 1. " MASK_ID ,Mask ID[27:0] (Test only)"
|
|
bitfld.long 0x08 0.--3. " REVISION_ID ,Revision ID (Test only)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
group.long 0x44++0x07
|
|
line.long 0x00 "PWRMAN_MASK_ID1,Mask ID Register 1"
|
|
bitfld.long 0x00 31. " MASK_ID_ENABLE ,Enable mask ID" "Not masked,Masked"
|
|
hexmask.long 0x00 0.--30. 1. " MASK_ID ,Mask ID[58:28] (Test only)"
|
|
line.long 0x04 "PWRMAN_PERIPHERAL_RESET,Peripheral Reset Control Register"
|
|
bitfld.long 0x04 29. " SPIS ,Reset SPI slave" "No reset,Reset"
|
|
bitfld.long 0x04 28. " ADC ,Reset ADC" "No reset,Reset"
|
|
bitfld.long 0x04 27. " OWM ,Reset 1-wire master" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 26. " SPIB ,Reset SPI bridge" "No reset,Reset"
|
|
bitfld.long 0x04 25. " SPIM2 ,Reset SPI master 2" "No reset,Reset"
|
|
bitfld.long 0x04 24. " SPIM1 ,Reset SPI master 1" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 23. " SPIM0 ,Reset I2C slave" "No reset,Reset"
|
|
bitfld.long 0x04 22. " I2CS ,Reset I2C slave" "No reset,Reset"
|
|
bitfld.long 0x04 21. " I2CM2 ,Reset I2C master 2" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 20. " I2CM1 ,Reset I2C master 1" "No reset,Reset"
|
|
bitfld.long 0x04 19. " I2CM0 ,Reset I2C master 0" "No reset,Reset"
|
|
bitfld.long 0x04 18. " UART3 ,Reset UART 3" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 17. " UART2 ,Reset UART 2" "No reset,Reset"
|
|
bitfld.long 0x04 16. " UART1 ,Reset UART 1" "No reset,Reset"
|
|
bitfld.long 0x04 15. " UART0 ,Reset UART 0" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 14. " PULSE_TRAIN ,Reset All pulse trains" "No reset,Reset"
|
|
bitfld.long 0x04 13. " TIMER5 ,Reset timer/counter module 5" "No reset,Reset"
|
|
bitfld.long 0x04 12. " TIMER4 ,Reset timer/counter module 4" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 11. " TIMER3 ,Reset timer/counter module 3" "No reset,Reset"
|
|
bitfld.long 0x04 10. " TIMER2 ,Reset timer/counter module 2" "No reset,Reset"
|
|
bitfld.long 0x04 9. " TIMER1 ,Reset timer/counter module 1" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 8. " TIMER0 ,Reset timer/counter module 0" "No reset,Reset"
|
|
bitfld.long 0x04 7. " GPIO ,Reset GPIO" "No reset,Reset"
|
|
bitfld.long 0x04 6. " WATCHDOG0 ,Reset watchdog timer 0" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 5. " TPU ,Reset TPU" "No reset,Reset"
|
|
bitfld.long 0x04 4. " CRC ,Reset CRC" "No reset,Reset"
|
|
bitfld.long 0x04 3. " USB ,Reset USB" "No reset,Reset"
|
|
textline " "
|
|
bitfld.long 0x04 2. " PMU ,Reset PMU" "No reset,Reset"
|
|
bitfld.long 0x04 1. " SPIX ,Reset SPI XIP" "No reset,Reset"
|
|
bitfld.long 0x04 0. " SSB ,Reset SSB" "No reset,Reset"
|
|
width 0x0B
|
|
tree.end
|
|
tree "CLKMAN (Clock Manager)"
|
|
base ad:0x40000400
|
|
width 26.
|
|
group.long 0x00++0x23
|
|
line.long 0x00 "CLKMAN_CLK_CONFIG,System Clock Configuration"
|
|
bitfld.long 0x00 4.--7. " CRYPTO_STABILITY_COUNT ,Crypto oscillator stability select" "256,512,1024,2048,4096,8192,16384,32768,65536,131072,262144,524288,1048576,2097152,4194304,8388608"
|
|
bitfld.long 0x00 0. " CRYPTO_ENABLE ,Cryptographic (TPU) relaxation oscillator enable" "Disabled,Enabled"
|
|
line.long 0x04 "CLKMAN_CLK_CTRL,System Clock Controls"
|
|
bitfld.long 0x04 24. " ADC_CLOCK_ENABLE ,ADC clock enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 21.--22. " WDT1_CLOCK_SELECT ,Watchdog 1 clock source select" "Scaled Sys Clock Source,RTC oscillator,Ring oscillator,Nano-ring oscillator"
|
|
textline " "
|
|
bitfld.long 0x04 20. " WDT1_CLOCK_ENABLE ,Watchdog 1 clock enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 17.--18. " WDT0_CLOCK_SELECT ,Watchdog 0 clock source select" "Scaled Sys Clock Source,RTC oscillator,Ring oscillator,Nano-ring oscillator"
|
|
textline " "
|
|
bitfld.long 0x04 16. " WDT0_CLOCK_ENABLE ,Watchdog 0 clock enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 13. " CPU_DYNAMIC_CLOCK ,Enable CPU dynamic clock gating" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 12. " RTOS_MODE ,Enable RTOS mode for SysTick timers" "Disabled,Enabled"
|
|
bitfld.long 0x04 8. " CRYPTO_CLOCK_ENABLE ,Crypto clock enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 5. " USB_CLOCK_SELECT ,USB clock select" "Relaxation Osc/2,?..."
|
|
bitfld.long 0x04 4. " USB_CLOCK_ENABLE ,USB Clock Enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 0.--1. " SYSTEM_SOURCE_SELECT ,System clock source select" "Relaxation Osc/2,Relaxation Osc,?..."
|
|
line.long 0x08 "CLKMAN_INTFL,Interrupt Flags"
|
|
eventfld.long 0x08 1. " SYS_RO_STABLE ,System oscillator stable interrupt flag" "Not stable,Stable"
|
|
eventfld.long 0x08 0. " CRYPTO_STABLE ,Crypto oscillator stable interrupt flag" "Not stable,Stable"
|
|
line.long 0x0C "CLKMAN_INTEN,Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x0C 1. " SYS_RO_STABLE ,System oscillator stable interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " CRYPTO_STABLE ,Crypto oscillator stable interrupt enable" "Disabled,Enabled"
|
|
line.long 0x10 "CLKMAN_TRIM_CALC,Trim Calculation Controls"
|
|
hexmask.long.word 0x10 16.--25. 1. " TRIM_CALC_RESULTS ,Trim calculation results"
|
|
bitfld.long 0x10 3. " TRIM_ENABLE ,Trim logic enable" "Disabled,Enabled"
|
|
textline " "
|
|
rbitfld.long 0x10 2. " TRIM_CALC_COMPLETED ,Trim calculation completed" "Started,Completed"
|
|
bitfld.long 0x10 1. " TRIM_CALC_START ,Start trim calculation" "Not started,Started"
|
|
textline " "
|
|
bitfld.long 0x10 0. " TRIM_CLK_SEL ,Trim clock select (ring oscillator)" "24MHz,Crypto"
|
|
line.long 0x14 "CLKMAN_I2C_TIMER_CTRL,I2C Timer Control"
|
|
bitfld.long 0x14 0. " I2C_1MS_TIMER_EN ,I2C 1ms timer enable" "Disabled,Enabled"
|
|
line.long 0x18 "CLKMAN_CM4_START_CLK_EN0,CM4 Start Clock on Interrupt Enable 0"
|
|
bitfld.long 0x18 31. " INTS[31] ,Interrupt source 31 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 30. " INTS[30] ,Interrupt source 30 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 29. " INTS[29] ,Interrupt source 29 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 28. " INTS[28] ,Interrupt source 28 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 27. " INTS[27] ,Interrupt source 27 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 26. " INTS[26] ,Interrupt source 26 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 25. " INTS[25] ,Interrupt source 25 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 24. " INTS[24] ,Interrupt source 24 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 23. " INTS[23] ,Interrupt source 23 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 22. " INTS[22] ,Interrupt source 22 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 21. " INTS[21] ,Interrupt source 21 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 20. " INTS[20] ,Interrupt source 20 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 19. " INTS[19] ,Interrupt source 19 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 18. " INTS[18] ,Interrupt source 18 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 17. " INTS[17] ,Interrupt source 17 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 16. " INTS[16] ,Interrupt source 16 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 15. " INTS[15] ,Interrupt source 15 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 14. " INTS[14] ,Interrupt source 14 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 13. " INTS[13] ,Interrupt source 13 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 12. " INTS[12] ,Interrupt source 12 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 11. " INTS[11] ,Interrupt source 11 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 10. " INTS[10] ,Interrupt source 10 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 9. " INTS[9] ,Interrupt source 9 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 8. " INTS[8] ,Interrupt source 8 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 7. " INTS[7] ,Interrupt source 7 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 6. " INTS[6] ,Interrupt source 6 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 5. " INTS[5] ,Interrupt source 5 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 4. " INTS[4] ,Interrupt source 4 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 3. " INTS[3] ,Interrupt source 3 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 2. " INTS[2] ,Interrupt source 2 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 1. " INTS[1] ,Interrupt source 1 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x18 0. " INTS[0] ,Interrupt source 0 (CM4 clock)" "Disabled,Enabled"
|
|
line.long 0x1C "CLKMAN_CM4_START_CLK_EN1,CM4 Start Clock on Interrupt Enable 1"
|
|
bitfld.long 0x1C 31. " INTS[63] ,Interrupt source 63 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 30. " INTS[62] ,Interrupt source 62 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 29. " INTS[61] ,Interrupt source 61 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 28. " INTS[60] ,Interrupt source 60 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 27. " INTS[59] ,Interrupt source 59 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 26. " INTS[58] ,Interrupt source 58 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 25. " INTS[57] ,Interrupt source 57 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 24. " INTS[56] ,Interrupt source 56 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 23. " INTS[55] ,Interrupt source 55 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 22. " INTS[54] ,Interrupt source 54 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 21. " INTS[53] ,Interrupt source 53 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 20. " INTS[52] ,Interrupt source 52 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 19. " INTS[51] ,Interrupt source 51 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 18. " INTS[50] ,Interrupt source 50 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 17. " INTS[49] ,Interrupt source 49 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 16. " INTS[48] ,Interrupt source 48 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 15. " INTS[47] ,Interrupt source 47 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 14. " INTS[46] ,Interrupt source 46 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 13. " INTS[45] ,Interrupt source 45 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 12. " INTS[44] ,Interrupt source 44 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 11. " INTS[43] ,Interrupt source 43 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 10. " INTS[42] ,Interrupt source 42 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 9. " INTS[41] ,Interrupt source 41 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 8. " INTS[40] ,Interrupt source 40 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 7. " INTS[39] ,Interrupt source 39 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 6. " INTS[38] ,Interrupt source 38 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 5. " INTS[37] ,Interrupt source 37 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 4. " INTS[36] ,Interrupt source 36 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 3. " INTS[35] ,Interrupt source 35 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 2. " INTS[34] ,Interrupt source 34 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x1C 1. " INTS[33] ,Interrupt source 33 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x1C 0. " INTS[32] ,Interrupt source 32 (CM4 clock)" "Disabled,Enabled"
|
|
line.long 0x20 "CLKMAN_CM4_START_CLK_EN2,CM4 Start Clock on Interrupt Enable 2"
|
|
bitfld.long 0x20 31. " INTS[95] ,Interrupt source 95 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 30. " INTS[94] ,Interrupt source 94 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 29. " INTS[93] ,Interrupt source 93 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 28. " INTS[92] ,Interrupt source 92 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 27. " INTS[91] ,Interrupt source 91 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 26. " INTS[90] ,Interrupt source 90 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 25. " INTS[89] ,Interrupt source 89 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 24. " INTS[88] ,Interrupt source 88 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 23. " INTS[87] ,Interrupt source 87 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 22. " INTS[86] ,Interrupt source 86 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 21. " INTS[85] ,Interrupt source 85 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 20. " INTS[84] ,Interrupt source 84 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 19. " INTS[83] ,Interrupt source 83 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 18. " INTS[82] ,Interrupt source 82 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 17. " INTS[81] ,Interrupt source 81 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 16. " INTS[80] ,Interrupt source 80 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 15. " INTS[79] ,Interrupt source 79 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 14. " INTS[78] ,Interrupt source 78 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 13. " INTS[77] ,Interrupt source 77 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 12. " INTS[76] ,Interrupt source 76 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 11. " INTS[75] ,Interrupt source 75 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 10. " INTS[74] ,Interrupt source 74 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 9. " INTS[73] ,Interrupt source 73 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 8. " INTS[72] ,Interrupt source 72 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 7. " INTS[71] ,Interrupt source 71 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 6. " INTS[70] ,Interrupt source 70 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 5. " INTS[69] ,Interrupt source 69 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 4. " INTS[68] ,Interrupt source 68 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 3. " INTS[67] ,Interrupt source 67 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 2. " INTS[66] ,Interrupt source 66 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x20 1. " INTS[65] ,Interrupt source 65 (CM4 clock)" "Disabled,Enabled"
|
|
bitfld.long 0x20 0. " INTS[64] ,Interrupt source 64 (CM4 clock)" "Disabled,Enabled"
|
|
textline " "
|
|
width 30.
|
|
group.long 0x40++0x43
|
|
line.long 0x00 "CLKMAN_SYS_CLK_CTRL_0_CM4,Control Settings for CLK0 - Cortex M4 Clock"
|
|
bitfld.long 0x00 0.--3. " CM4_CLK_SCALE ,Control settings for CLK0 - cortex M4 clock (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x04 "CLKMAN_SYS_CLK_CTRL_1_SYNC,Control Settings for CLK1 - Synchronizer Clock"
|
|
bitfld.long 0x04 0.--3. " SYNC_CLK_SCALE ,Control settings for CLK1 - synchronizer clock (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x08 "CLKMAN_SYS_CLK_CTRL_2_SPIX,Control Settings for CLK2 - SPI XIP Clock"
|
|
bitfld.long 0x08 0.--3. " SPIX_CLK_SCALE ,Control settings for CLK2 - SPI XIP clock (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x0C "CLKMAN_SYS_CLK_CTRL_3_PRNG,Control Settings for CLK3 - PRNG Clock"
|
|
bitfld.long 0x0C 0.--3. " PRNG_CLK_SCALE ,Control settings for CLK3 - PRNG clock (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x10 "CLKMAN_SYS_CLK_CTRL_4_WDT0,Control Settings for CLK4 - Watchdog Timer 0"
|
|
bitfld.long 0x10 0.--3. " WATCHDOG0_CLK_SCALE ,Control settings for CLK4 - watchdog timer 0 (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x14 "CLKMAN_SYS_CLK_CTRL_5_WDT1,Control Settings for CLK5 - Watchdog Timer 1"
|
|
bitfld.long 0x14 0.--3. " WATCHDOG1_CLK_SCALE ,Control settings for CLK5 - watchdog timer 1 (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x18 "CLKMAN_SYS_CLK_CTRL_6_GPIO,Control Settings for CLK6 - Clock for GPIO Ports"
|
|
bitfld.long 0x18 0.--3. " GPIO_CLK_SCALE ,Control settings for CLK6 - clock for GPIO ports (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x1C "CLKMAN_SYS_CLK_CTRL_7_PT,Control Settings for CLK7 - Source Clock for All Pulse Trains"
|
|
bitfld.long 0x1C 0.--3. " PULSE_TRAIN_CLK_SCALE ,Control settings for CLK7 - source clock for All pulse trains (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x20 "CLKMAN_SYS_CLK_CTRL_8_UART,Control Settings for CLK8 - Source Clock for All UARTs"
|
|
bitfld.long 0x20 0.--3. " UART_CLK_SCALE ,Control settings for CLK8 - source clock for all UARTs (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x24 "CLKMAN_SYS_CLK_CTRL_9_I2CM,Control Settings for CLK9 - Source Clock for All I2C Masters"
|
|
bitfld.long 0x24 0.--3. " I2CM_CLK_SCALE ,Control settings for CLK9 - source clock for all I2C masters (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x28 "CLKMAN_SYS_CLK_CTRL_10_I2CS,Control Settings for CLK10 - Source Clock for I2C Slave"
|
|
bitfld.long 0x28 0.--3. " I2CS_CLK_SCALE ,Control settings for CLK10 - source clock for I2C slave (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x2C "CLKMAN_SYS_CLK_CTRL_11_SPI0,Control Settings for CLK11 - SPI Master 0"
|
|
bitfld.long 0x2C 0.--3. " SPI0_CLK_SCALE ,Control settings for CLK11 - SSPI master 0 (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x30 "CLKMAN_SYS_CLK_CTRL_12_SPI1,Control Settings for CLK11 - SPI Master 1"
|
|
bitfld.long 0x30 0.--3. " SPI1_CLK_SCALE ,Control settings for CLK12 - SPI master 1 (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x34 "CLKMAN_SYS_CLK_CTRL_13_SPI2,Control Settings for CLK11 - SPI Master 2"
|
|
bitfld.long 0x34 0.--3. " SPI2_CLK_SCALE ,Control settings for CLK13 - SPI master 2 (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x38 "CLKMAN_SYS_CLK_CTRL_14_SPIB,Control Settings for CLK14 - SPI Bridge Clock"
|
|
bitfld.long 0x38 0.--3. " SPIB_CLK_SCALE ,Control settings for CLK14 - SPI bridge clock (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x3C "CLKMAN_SYS_CLK_CTRL_15_OWM,Control Settings for CLK15 - 1-Wire Master Clock"
|
|
bitfld.long 0x3C 0.--3. " OWM_CLK_SCALE ,Control settings for CLK15 - 1-wire master clock (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
line.long 0x40 "CLKMAN_SYS_CLK_CTRL_16_SPIS,Control Settings for CLK16 - SPI Slave Clock"
|
|
bitfld.long 0x40 0.--3. " SPIS_CLK_SCALE ,Control settings for CLK16 - SPI slave clock (system clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,?..."
|
|
group.long 0x100++0x0B
|
|
line.long 0x00 "CLKMAN_CRYPT_CLK_CTRL_0_AES,Control Settings for Crypto Clock 0 - AES"
|
|
bitfld.long 0x00 0.--3. " AES_CLK_SCALE ,Control settings for crypto clock 0 - AES (crypto clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,/1,/1,/1,/1,/1,/1"
|
|
line.long 0x04 "CLKMAN_CRYPT_CLK_CTRL_1_MAA,Control Settings for Crypto Clock 1 - MAA"
|
|
bitfld.long 0x04 0.--3. " MAA_CLK_SCALE ,Control settings for crypto Clock 1 - MAA (crypto clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,/1,/1,/1,/1,/1,/1"
|
|
line.long 0x08 "CLKMAN_CRYPT_CLK_CTRL_2_PRNG,Control Settings for Crypto Clock 2 - PRNG"
|
|
bitfld.long 0x08 0.--3. " PRNG_CLK_SCALE ,Control settings for crypto Clock 2 - PRNG (crypto clock source)" "Disabled,/1,/2,/4,/8,/16,/32,/64,/128,/256,/1,/1,/1,/1,/1,/1"
|
|
textline " "
|
|
width 23.
|
|
group.long 0x140++0x0B
|
|
line.long 0x00 "CLKMAN_CLK_GATE_CTRL0,Dynamic Clock Gating Control Register 0"
|
|
bitfld.long 0x00 30.--31. " WATCHDOG0_CLK_GATER ,Clock gating control for watchdog timer 0" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x00 28.--29. " TPU_CLK_GATER ,Clock gating control for TPU" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x00 26.--27. " CRC_CLK_GATER ,Clock gating control for CRC" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x00 24.--25. " USB_CLK_GATER ,Clock gating control for USB" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x00 22.--23. " PMU_CLK_GATER ,Clock gating control for PMU" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x00 20.--21. " SPIX_CLK_GATER ,Clock gating control for SPI XIP" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x00 18.--19. " PAD_CLK_GATER ,Clock gating control for Pad Mode Filter" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x00 16.--17. " SSB_MUX_CLK_GATER ,Clock gating control for SSB Mux" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x00 14.--15. " PTP_CLK_GATER ,Clock gating control for PTP Logic" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x00 12.--13. " SYSMAN_CLK_GATER ,Clock gating control for Clkman/Pwrman/IOman" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x00 10.--11. " APB_BRIDGE_CLK_GATER ,Clock gating control for AHB-to-APB bridge" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x00 8.--9. " SRAM_CLK_GATER ,Clock gating control for SRAM" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x00 6.--7. " FLASH_CLK_GATER ,Clock gating control for flash memory" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x00 4.--5. " ICACHE_CLK_GATER ,Clock gating control for instruction cache" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x00 2.--3. " AHB32_CLK_GATER ,Clock gating control for AHB32" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x00 0.--1. " CM4_CLK_GATER ,Clock gating control for CM4 CPU" "Clock off,Gating enabled,Clock on,Clock on"
|
|
line.long 0x04 "CLKMAN_CLK_GATE_CTRL1,Dynamic Clock Gating Control Register 1"
|
|
bitfld.long 0x04 30.--31. " I2CM2_CLK_GATER ,Clock gating control for I2C master 2" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x04 28.--29. " I2CM1_CLK_GATER ,Clock gating control for I2C master 1" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x04 26.--27. " I2CM0_CLK_GATER ,Clock gating control for I2C master 0" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x04 24.--25. " UART3_CLK_GATER ,Clock gating control for UART 3" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x04 22.--23. " UART2_CLK_GATER ,Clock gating control for UART 2" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x04 20.--21. " UART1_CLK_GATER ,Clock gating control for UART 1" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x04 18.--19. " UART0_CLK_GATER ,Clock gating control for UART 0" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x04 16.--17. " PULSETRAIN_CLK_GATER ,Clock gating control for pulse train generators" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x04 14.--15. " TIMER5_CLK_GATER ,Clock gating control for timer/counter module 5" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x04 12.--13. " TIMER4_CLK_GATER ,Clock gating control for timer/counter module 4" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x04 10.--11. " TIMER3_CLK_GATER ,Clock gating control for timer/counter module 3" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x04 8.--9. " TIMER2_CLK_GATER ,Clock gating control for timer/counter module 2" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x04 6.--7. " TIMER1_CLK_GATER ,Clock gating control for timer/counter module 1" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x04 4.--5. " TIMER0_CLK_GATER ,Clock gating control for timer/counter module 0" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x04 2.--3. " GPIO_CLK_GATER ,Clock gating control for GPIO ports" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x04 0.--1. " WATCHDOG1_CLK_GATER ,Clock gating control for watchdog timer 1" "Clock off,Gating enabled,Clock on,Clock on"
|
|
line.long 0x08 "CLKMAN_CLK_GATE_CTRL2,Dynamic Clock Gating Control Register 2"
|
|
bitfld.long 0x08 14.--15. " SPIS_CLK_GATER ,Clock gating control for SPI slave" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x08 12.--13. " ADC_CLK_GATER ,Clock gating control for ADC" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x08 10.--11. " OWM_CLK_GATER ,Clock gating control for 1-wire master (OWM)" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x08 8.--9. " SPI_BRIDGE_CLK_GATER ,Clock gating control for SPI bridge" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x08 6.--7. " SPI2_CLK_GATER ,Clock gating control for SPI master 2" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x08 4.--5. " SPI1_CLK_GATER ,Clock gating control for SPI master 1" "Clock off,Gating enabled,Clock on,Clock on"
|
|
textline " "
|
|
bitfld.long 0x08 2.--3. " SPI0_CLK_GATER ,Clock gating control for SPI master 0" "Clock off,Gating enabled,Clock on,Clock on"
|
|
bitfld.long 0x08 0.--1. " I2CS_CLK_GATER ,Clock gating control for I2C slave" "Clock off,Gating enabled,Clock on,Clock on"
|
|
width 0x0B
|
|
tree.end
|
|
tree "WDT (Watchdog Timers)"
|
|
base ad:0x40008000
|
|
width 16.
|
|
tree "WDT0"
|
|
if (((per.l(ad:0x40008000+0x0+0x10))&0xFFFFFFFF)==0x00000000)
|
|
group.long 0x0++0x03
|
|
line.long 0x00 "WDT0_CTRL,Watchdog Timer Control Register"
|
|
bitfld.long 0x00 12.--15. " WAIT_PERIOD ,Period from WDT clear to clear window begin" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
bitfld.long 0x00 9. " EN_CLOCK ,Watchdog clock gate " "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " EN_TIMER ,Watchdog timer enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " RST_PERIOD ,Period from WDT clear to reset flag set" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " INT_PERIOD ,Period from WDT clear to interrupt flag set" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
else
|
|
rgroup.long 0x0++0x03
|
|
line.long 0x00 "WDT0_CTRL,Watchdog Timer Control Register"
|
|
bitfld.long 0x00 12.--15. " WAIT_PERIOD ,Period from WDT clear to clear window begin" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
bitfld.long 0x00 9. " EN_CLOCK ,Watchdog clock gate " "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " EN_TIMER ,Watchdog timer enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " RST_PERIOD ,Period from WDT clear to reset flag set" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " INT_PERIOD ,Period from WDT clear to interrupt flag set" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
endif
|
|
group.long 0x04++0x0F
|
|
line.long 0x00 "WDT0_CLEAR,Watchdog Timer Clear Register (Feed Dog)"
|
|
line.long 0x04 "WDT0_FLAGS,Watchdog Interrupt and Reset Flags"
|
|
eventfld.long 0x04 2. " RESET_OUT ,Watchdog reset flag" "No reset,Reset"
|
|
eventfld.long 0x04 1. " PRE_WIN ,Watchdog pre-window clear interrupt flag" "Not cleared,Cleared"
|
|
eventfld.long 0x04 0. " TIMEOUT ,Watchdog timeout interrupt flag" "No timeout,Timeout"
|
|
line.long 0x08 "WDT0_ENABLE,Interrupt/Reset Enable/Disable Controls"
|
|
bitfld.long 0x08 2. " RESET_OUT ,Enable watchdog reset output" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " PRE_WIN ,Enable watchdog pre-window reset interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " TIMEOUT ,Enable watchdog interrupt" "Disabled,Enabled"
|
|
line.long 0x0C "WDT0_LOCK_CTRL,Lock Register Setting for WDT CTRL"
|
|
hexmask.long.byte 0x0C 0.--7. 1. " WDLOCK ,Lock for control register"
|
|
tree.end
|
|
tree "WDT1"
|
|
if (((per.l(ad:0x40008000+0x1000+0x10))&0xFFFFFFFF)==0x00000000)
|
|
group.long 0x1000++0x03
|
|
line.long 0x00 "WDT1_CTRL,Watchdog Timer Control Register"
|
|
bitfld.long 0x00 12.--15. " WAIT_PERIOD ,Period from WDT clear to clear window begin" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
bitfld.long 0x00 9. " EN_CLOCK ,Watchdog clock gate " "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " EN_TIMER ,Watchdog timer enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " RST_PERIOD ,Period from WDT clear to reset flag set" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " INT_PERIOD ,Period from WDT clear to interrupt flag set" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
else
|
|
rgroup.long 0x1000++0x03
|
|
line.long 0x00 "WDT1_CTRL,Watchdog Timer Control Register"
|
|
bitfld.long 0x00 12.--15. " WAIT_PERIOD ,Period from WDT clear to clear window begin" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
bitfld.long 0x00 9. " EN_CLOCK ,Watchdog clock gate " "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " EN_TIMER ,Watchdog timer enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " RST_PERIOD ,Period from WDT clear to reset flag set" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " INT_PERIOD ,Period from WDT clear to interrupt flag set" "2^31,2^30,2^29,2^28,2^27,2^26,2^25,2^24,2^23,2^22,2^21,2^20,2^19,2^18,2^17,2^16"
|
|
endif
|
|
group.long 0x04++0x0F
|
|
line.long 0x00 "WDT1_CLEAR,Watchdog Timer Clear Register (Feed Dog)"
|
|
line.long 0x04 "WDT1_FLAGS,Watchdog Interrupt and Reset Flags"
|
|
eventfld.long 0x04 2. " RESET_OUT ,Watchdog reset flag" "No reset,Reset"
|
|
eventfld.long 0x04 1. " PRE_WIN ,Watchdog pre-window clear interrupt flag" "Not cleared,Cleared"
|
|
eventfld.long 0x04 0. " TIMEOUT ,Watchdog timeout interrupt flag" "No timeout,Timeout"
|
|
line.long 0x08 "WDT1_ENABLE,Interrupt/Reset Enable/Disable Controls"
|
|
bitfld.long 0x08 2. " RESET_OUT ,Enable watchdog reset output" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " PRE_WIN ,Enable watchdog pre-window reset interrupt" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " TIMEOUT ,Enable watchdog interrupt" "Disabled,Enabled"
|
|
line.long 0x0C "WDT1_LOCK_CTRL,Lock Register Setting for WDT CTRL"
|
|
hexmask.long.byte 0x0C 0.--7. 1. " WDLOCK ,Lock for control register"
|
|
tree.end
|
|
width 0x0B
|
|
tree.end
|
|
tree "GPIO (General-Purpose I/O)"
|
|
base ad:0x4000A000
|
|
width 19.
|
|
group.long 0x0++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P0,Port P0 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P0.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P0.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P0.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P0.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P0.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P0.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P0.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P0.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
group.long 0x4++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P1,Port P1 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P1.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P1.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P1.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P1.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P1.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P1.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P1.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P1.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
group.long 0x8++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P2,Port P2 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P2.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P2.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P2.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P2.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P2.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P2.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P2.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P2.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
group.long 0xC++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P3,Port P3 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P3.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P3.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P3.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P3.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P3.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P3.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P3.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P3.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
group.long 0x10++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P4,Port P4 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P4.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P4.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P4.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P4.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P4.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P4.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P4.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P4.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
group.long 0x14++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P5,Port P5 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P5.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P5.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P5.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P5.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P5.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P5.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P5.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P5.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P6,Port P6 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P6.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P6.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P6.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P6.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P6.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P6.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P6.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P6.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
group.long 0x1C++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P7,Port P7 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P7.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P7.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P7.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P7.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P7.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P7.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P7.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P7.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
group.long 0x20++0x03
|
|
line.long 0x00 "GPIO_RST_MODE_P8,Port P8 Default (Power-On Reset) Output Drive Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P8.7 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P8.6 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P8.5 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P8.4 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P8.3 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P8.2 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P8.1 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P8.0 default output drive mode" "Drive 0,Weak pulldown,Weak pullup,Drive 1,High impedance,?..."
|
|
rgroup.long 0x40++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn0,Port P0 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P0.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P0.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P0.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P0.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P0.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P0.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P0.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P0.0 GPIO mode acknowledge" "Not available,Available"
|
|
rgroup.long 0x44++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn1,Port P1 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P1.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P1.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P1.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P1.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P1.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P1.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P1.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P1.0 GPIO mode acknowledge" "Not available,Available"
|
|
rgroup.long 0x48++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn2,Port P2 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P2.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P2.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P2.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P2.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P2.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P2.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P2.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P2.0 GPIO mode acknowledge" "Not available,Available"
|
|
rgroup.long 0x4C++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn3,Port P3 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P3.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P3.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P3.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P3.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P3.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P3.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P3.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P3.0 GPIO mode acknowledge" "Not available,Available"
|
|
rgroup.long 0x50++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn4,Port P4 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P4.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P4.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P4.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P4.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P4.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P4.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P4.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P4.0 GPIO mode acknowledge" "Not available,Available"
|
|
rgroup.long 0x54++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn5,Port P5 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P5.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P5.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P5.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P5.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P5.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P5.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P5.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P5.0 GPIO mode acknowledge" "Not available,Available"
|
|
rgroup.long 0x58++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn6,Port P6 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P6.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P6.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P6.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P6.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P6.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P6.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P6.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P6.0 GPIO mode acknowledge" "Not available,Available"
|
|
rgroup.long 0x5C++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn7,Port P7 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P7.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P7.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P7.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P7.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P7.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P7.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P7.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P7.0 GPIO mode acknowledge" "Not available,Available"
|
|
rgroup.long 0x60++0x03
|
|
line.long 0x00 "GPIO_FREE_Pn8,Port P8 Free for GPIO Operation Flags"
|
|
bitfld.long 0x00 7. " PIN7 ,P8.7 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 6. " PIN6 ,P8.6 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 5. " PIN5 ,P8.5 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 4. " PIN4 ,P8.4 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P8.3 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 2. " PIN2 ,P8.2 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 1. " PIN1 ,P8.1 GPIO mode acknowledge" "Not available,Available"
|
|
bitfld.long 0x00 0. " PIN0 ,P8.0 GPIO mode acknowledge" "Not available,Available"
|
|
textline " "
|
|
group.long 0x80++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P0,Port P0 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P0.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P0.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P0.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P0.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P0.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P0.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P0.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P0.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
group.long 0x84++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P1,Port P1 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P1.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P1.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P1.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P1.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P1.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P1.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P1.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P1.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
group.long 0x88++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P2,Port P2 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P2.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P2.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P2.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P2.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P2.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P2.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P2.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P2.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
group.long 0x8C++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P3,Port P3 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P3.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P3.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P3.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P3.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P3.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P3.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P3.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P3.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
group.long 0x90++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P4,Port P4 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P4.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P4.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P4.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P4.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P4.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P4.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P4.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P4.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
group.long 0x94++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P5,Port P5 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P5.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P5.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P5.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P5.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P5.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P5.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P5.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P5.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
group.long 0x98++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P6,Port P6 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P6.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P6.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P6.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P6.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P6.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P6.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P6.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P6.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
group.long 0x9C++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P7,Port P7 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P7.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P7.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P7.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P7.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P7.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P7.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P7.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P7.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
group.long 0xA0++0x03
|
|
line.long 0x00 "GPIO_OUT_MODE_P8,Port P8 GPIO Output Drive Mode"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P8.7 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P8.6 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P8.5 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P8.4 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P8.3 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P8.2 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P8.1 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P8.0 output drive mode" "High impedance/Optional weak pullup,Open drain,Open drain/Weak pullup,,Normal drive/High impedance,Normal drive/Drive high/low,Slow drive/High impedance,Slow drive/Drive high/low,Fast drive/High impedance,Fast drive/Drive high/low,High impedance/Optional weak pullup,Open source,Open source/Weak pulldown,,,High impedance/Input receiver disabled"
|
|
textline " "
|
|
group.long 0xC0++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P0,Port P0 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P0.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P0.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P0.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P0.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P0.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P0.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P0.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P0.0 GPIO output drive value" "0,1"
|
|
group.long 0xC4++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P1,Port P1 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P1.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P1.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P1.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P1.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P1.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P1.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P1.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P1.0 GPIO output drive value" "0,1"
|
|
group.long 0xC8++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P2,Port P2 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P2.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P2.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P2.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P2.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P2.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P2.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P2.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P2.0 GPIO output drive value" "0,1"
|
|
group.long 0xCC++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P3,Port P3 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P3.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P3.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P3.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P3.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P3.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P3.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P3.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P3.0 GPIO output drive value" "0,1"
|
|
group.long 0xD0++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P4,Port P4 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P4.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P4.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P4.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P4.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P4.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P4.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P4.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P4.0 GPIO output drive value" "0,1"
|
|
group.long 0xD4++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P5,Port P5 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P5.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P5.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P5.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P5.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P5.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P5.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P5.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P5.0 GPIO output drive value" "0,1"
|
|
group.long 0xD8++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P6,Port P6 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P6.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P6.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P6.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P6.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P6.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P6.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P6.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P6.0 GPIO output drive value" "0,1"
|
|
group.long 0xDC++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P7,Port P7 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P7.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P7.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P7.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P7.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P7.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P7.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P7.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P7.0 GPIO output drive value" "0,1"
|
|
group.long 0xE0++0x03
|
|
line.long 0x00 "GPIO_OUT_VAL_P8,Port P8 GPIO Output Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P8.7 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P8.6 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P8.5 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P8.4 GPIO output drive value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P8.3 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P8.2 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P8.1 GPIO output drive value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P8.0 GPIO output drive value" "0,1"
|
|
textline " "
|
|
group.long 0x100++0x23
|
|
line.long 0x00 "GPIO_FUNC_SEL_P0,Port P0 GPIO Function Select"
|
|
bitfld.long 0x00 28.--31. " PIN7 ,P0.7 output function select" "Firmware control,Pulse train 7,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x00 24.--27. " PIN6 ,P0.6 output function select" "Firmware control,Pulse train 6,32-bit Timer 0 I/O,?..."
|
|
bitfld.long 0x00 20.--23. " PIN5 ,P0.5 output function select" "Firmware control,Pulse train 5,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x00 16.--19. " PIN4 ,P0.4 output function select" "Firmware control,Pulse train 4,32-bit Timer 4 I/O,?..."
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " PIN3 ,P0.3 output function select" "Firmware control,Pulse train 3,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x00 8.--11. " PIN2 ,P0.2 output function select" "Firmware control,Pulse train 2,32-bit Timer 2 I/O,?..."
|
|
bitfld.long 0x00 4.--7. " PIN1 ,P0.1 output function select" "Firmware control,Pulse train 1,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x00 0.--3. " PIN0 ,P0.0 output function select" "Firmware control,Pulse train 0,32-bit Timer 0 I/O,?..."
|
|
line.long 0x04 "GPIO_FUNC_SEL_P1,Port P1 GPIO Function Select"
|
|
bitfld.long 0x04 28.--31. " PIN7 ,P1.7 output function select" "Firmware control,Pulse train 15,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x04 24.--27. " PIN6 ,P1.6 output function select" "Firmware control,Pulse train 14,32-bit Timer 2 I/O,?..."
|
|
bitfld.long 0x04 20.--23. " PIN5 ,P1.5 output function select" "Firmware control,Pulse train 13,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x04 16.--19. " PIN4 ,P1.4 output function select" "Firmware control,Pulse train 12,32-bit Timer 0 I/O,?..."
|
|
textline " "
|
|
bitfld.long 0x04 12.--15. " PIN3 ,P1.3 output function select" "Firmware control,Pulse train 11,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x04 8.--11. " PIN2 ,P1.2 output function select" "Firmware control,Pulse train 10,32-bit Timer 4 I/O,?..."
|
|
bitfld.long 0x04 4.--7. " PIN1 ,P1.1 output function select" "Firmware control,Pulse train 9,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x04 0.--3. " PIN0 ,P1.0 output function select" "Firmware control,Pulse train 8,32-bit Timer 2 I/O,?..."
|
|
line.long 0x08 "GPIO_FUNC_SEL_P2,Port P2 GPIO Function Select"
|
|
bitfld.long 0x08 28.--31. " PIN7 ,P2.7 output function select" "Firmware control,Pulse train 7,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x08 24.--27. " PIN6 ,P2.6 output function select" "Firmware control,Pulse train 6,32-bit Timer 4 I/O,?..."
|
|
bitfld.long 0x08 20.--23. " PIN5 ,P2.5 output function select" "Firmware control,Pulse train 5,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x08 16.--19. " PIN4 ,P2.4 output function select" "Firmware control,Pulse train 4,32-bit Timer 2 I/O,?..."
|
|
textline " "
|
|
bitfld.long 0x08 12.--15. " PIN3 ,P2.3 output function select" "Firmware control,Pulse train 3,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x08 8.--11. " PIN2 ,P2.2 output function select" "Firmware control,Pulse train 2,32-bit Timer 0 I/O,?..."
|
|
bitfld.long 0x08 4.--7. " PIN1 ,P2.1 output function select" "Firmware control,Pulse train 1,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x08 0.--3. " PIN0 ,P2.0 output function select" "Firmware control,Pulse train 0,32-bit Timer 4 I/O,?..."
|
|
line.long 0x0C "GPIO_FUNC_SEL_P3,Port P3 GPIO Function Select"
|
|
bitfld.long 0x0C 28.--31. " PIN7 ,P3.7 output function select" "Firmware control,Pulse train 15,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x0C 24.--27. " PIN6 ,P3.6 output function select" "Firmware control,Pulse train 14,32-bit Timer 0 I/O,?..."
|
|
bitfld.long 0x0C 20.--23. " PIN5 ,P3.5 output function select" "Firmware control,Pulse train 13,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x0C 16.--19. " PIN4 ,P3.4 output function select" "Firmware control,Pulse train 12,32-bit Timer 4 I/O,?..."
|
|
textline " "
|
|
bitfld.long 0x0C 12.--15. " PIN3 ,P3.3 output function select" "Firmware control,Pulse train 11,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x0C 8.--11. " PIN2 ,P3.2 output function select" "Firmware control,Pulse train 10,32-bit Timer 2 I/O,?..."
|
|
bitfld.long 0x0C 4.--7. " PIN1 ,P3.1 output function select" "Firmware control,Pulse train 9,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x0C 0.--3. " PIN0 ,P3.0 output function select" "Firmware control,Pulse train 8,32-bit Timer 0 I/O,?..."
|
|
line.long 0x10 "GPIO_FUNC_SEL_P4,Port P4 GPIO Function Select"
|
|
bitfld.long 0x10 28.--31. " PIN7 ,P4.7 output function select" "Firmware control,Pulse train 7,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x10 24.--27. " PIN6 ,P4.6 output function select" "Firmware control,Pulse train 6,32-bit Timer 2 I/O,?..."
|
|
bitfld.long 0x10 20.--23. " PIN5 ,P4.5 output function select" "Firmware control,Pulse train 5,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x10 16.--19. " PIN4 ,P4.4 output function select" "Firmware control,Pulse train 4,32-bit Timer 0 I/O,?..."
|
|
textline " "
|
|
bitfld.long 0x10 12.--15. " PIN3 ,P4.3 output function select" "Firmware control,Pulse train 3,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x10 8.--11. " PIN2 ,P4.2 output function select" "Firmware control,Pulse train 2,32-bit Timer 4 I/O,?..."
|
|
bitfld.long 0x10 4.--7. " PIN1 ,P4.1 output function select" "Firmware control,Pulse train 1,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x10 0.--3. " PIN0 ,P4.0 output function select" "Firmware control,Pulse train 0,32-bit Timer 2 I/O,?..."
|
|
line.long 0x14 "GPIO_FUNC_SEL_P5,Port P5 GPIO Function Select"
|
|
bitfld.long 0x14 28.--31. " PIN7 ,P5.7 output function select" "Firmware control,Pulse train 15,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x14 24.--27. " PIN6 ,P5.6 output function select" "Firmware control,Pulse train 14,32-bit Timer 4 I/O,?..."
|
|
bitfld.long 0x14 20.--23. " PIN5 ,P5.5 output function select" "Firmware control,Pulse train 13,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x14 16.--19. " PIN4 ,P5.4 output function select" "Firmware control,Pulse train 12,32-bit Timer 2 I/O,?..."
|
|
textline " "
|
|
bitfld.long 0x14 12.--15. " PIN3 ,P5.3 output function select" "Firmware control,Pulse train 11,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x14 8.--11. " PIN2 ,P5.2 output function select" "Firmware control,Pulse train 10,32-bit Timer 0 I/O,?..."
|
|
bitfld.long 0x14 4.--7. " PIN1 ,P5.1 output function select" "Firmware control,Pulse train 9,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x14 0.--3. " PIN0 ,P5.0 output function select" "Firmware control,Pulse train 8,32-bit Timer 4 I/O,?..."
|
|
line.long 0x18 "GPIO_FUNC_SEL_P6,Port P6 GPIO Function Select"
|
|
bitfld.long 0x18 28.--31. " PIN7 ,P6.7 output function select" "Firmware control,Pulse train 15,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x18 24.--27. " PIN6 ,P6.6 output function select" "Firmware control,Pulse train 14,32-bit Timer 4 I/O,?..."
|
|
bitfld.long 0x18 20.--23. " PIN5 ,P6.5 output function select" "Firmware control,Pulse train 13,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x18 16.--19. " PIN4 ,P6.4 output function select" "Firmware control,Pulse train 12,32-bit Timer 2 I/O,?..."
|
|
textline " "
|
|
bitfld.long 0x18 12.--15. " PIN3 ,P6.3 output function select" "Firmware control,Pulse train 11,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x18 8.--11. " PIN2 ,P6.2 output function select" "Firmware control,Pulse train 10,32-bit Timer 0 I/O,?..."
|
|
bitfld.long 0x18 4.--7. " PIN1 ,P6.1 output function select" "Firmware control,Pulse train 9,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x18 0.--3. " PIN0 ,P6.0 output function select" "Firmware control,Pulse train 8,32-bit Timer 4 I/O,?..."
|
|
line.long 0x1C "GPIO_FUNC_SEL_P7,Port P7 GPIO Function Select"
|
|
bitfld.long 0x1C 28.--31. " PIN7 ,P7.7 output function select" "Firmware control,Pulse train 15,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x1C 24.--27. " PIN6 ,P7.6 output function select" "Firmware control,Pulse train 14,32-bit Timer 4 I/O,?..."
|
|
bitfld.long 0x1C 20.--23. " PIN5 ,P7.5 output function select" "Firmware control,Pulse train 13,32-bit Timer 3 I/O,?..."
|
|
bitfld.long 0x1C 16.--19. " PIN4 ,P7.4 output function select" "Firmware control,Pulse train 12,32-bit Timer 2 I/O,?..."
|
|
textline " "
|
|
bitfld.long 0x1C 12.--15. " PIN3 ,P7.3 output function select" "Firmware control,Pulse train 11,32-bit Timer 1 I/O,?..."
|
|
bitfld.long 0x1C 8.--11. " PIN2 ,P7.2 output function select" "Firmware control,Pulse train 10,32-bit Timer 0 I/O,?..."
|
|
bitfld.long 0x1C 4.--7. " PIN1 ,P7.1 output function select" "Firmware control,Pulse train 9,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x1C 0.--3. " PIN0 ,P7.0 output function select" "Firmware control,Pulse train 8,32-bit Timer 4 I/O,?..."
|
|
line.long 0x20 "GPIO_FUNC_SEL_P8,Port P8 GPIO Function Select"
|
|
bitfld.long 0x20 4.--7. " PIN1 ,P8.1 output function select" "Firmware control,Pulse train 9,32-bit Timer 5 I/O,?..."
|
|
bitfld.long 0x20 0.--3. " PIN0 ,P8.0 output function select" "Firmware control,Pulse train 0,32-bit Timer 0 I/O,?..."
|
|
textline " "
|
|
group.long 0x140++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P0,Port P0 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P0.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P0.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P0.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P0.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P0.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P0.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P0.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P0.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
group.long 0x144++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P1,Port P1 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P1.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P1.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P1.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P1.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P1.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P1.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P1.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P1.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
group.long 0x148++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P2,Port P2 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P2.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P2.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P2.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P2.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P2.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P2.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P2.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P2.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
group.long 0x14C++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P3,Port P3 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P3.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P3.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P3.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P3.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P3.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P3.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P3.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P3.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
group.long 0x150++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P4,Port P4 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P4.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P4.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P4.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P4.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P4.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P4.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P4.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P4.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
group.long 0x154++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P5,Port P5 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P5.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P5.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P5.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P5.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P5.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P5.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P5.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P5.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
group.long 0x158++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P6,Port P6 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P6.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P6.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P6.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P6.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P6.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P6.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P6.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P6.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
group.long 0x15C++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P7,Port P7 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P7.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P7.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P7.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P7.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P7.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P7.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P7.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P7.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
group.long 0x160++0x03
|
|
line.long 0x00 "GPIO_IN_MODE_P8,Port P8 GPIO Input Monitoring Mode"
|
|
bitfld.long 0x00 28.--29. " PIN7 ,P8.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 24.--25. " PIN6 ,P8.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 20.--21. " PIN5 ,P8.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 16.--17. " PIN4 ,P8.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
bitfld.long 0x00 12.--13. " PIN3 ,P8.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 8.--9. " PIN2 ,P8.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 4.--5. " PIN1 ,P8.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
bitfld.long 0x00 0.--1. " PIN0 ,P8.0 input monitoring mode" "Normal,Inverted,Return 0,Return 1"
|
|
textline " "
|
|
rgroup.long 0x180++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P0,Port P0 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P0.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P0.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P0.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P0.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P0.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P0.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P0.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P0.0 input value" "0,1"
|
|
rgroup.long 0x184++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P1,Port P1 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P1.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P1.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P1.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P1.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P1.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P1.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P1.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P1.0 input value" "0,1"
|
|
rgroup.long 0x188++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P2,Port P2 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P2.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P2.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P2.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P2.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P2.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P2.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P2.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P2.0 input value" "0,1"
|
|
rgroup.long 0x18C++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P3,Port P3 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P3.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P3.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P3.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P3.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P3.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P3.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P3.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P3.0 input value" "0,1"
|
|
rgroup.long 0x190++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P4,Port P4 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P4.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P4.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P4.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P4.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P4.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P4.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P4.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P4.0 input value" "0,1"
|
|
rgroup.long 0x194++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P5,Port P5 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P5.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P5.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P5.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P5.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P5.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P5.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P5.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P5.0 input value" "0,1"
|
|
rgroup.long 0x198++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P6,Port P6 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P6.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P6.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P6.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P6.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P6.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P6.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P6.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P6.0 input value" "0,1"
|
|
rgroup.long 0x19C++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P7,Port P7 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P7.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P7.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P7.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P7.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P7.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P7.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P7.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P7.0 input value" "0,1"
|
|
rgroup.long 0x1A0++0x03
|
|
line.long 0x00 "GPIO_IN_VAL_P8,Port P8 GPIO Input Value"
|
|
bitfld.long 0x00 7. " PIN7 ,P8.7 input value" "0,1"
|
|
bitfld.long 0x00 6. " PIN6 ,P8.6 input value" "0,1"
|
|
bitfld.long 0x00 5. " PIN5 ,P8.5 input value" "0,1"
|
|
bitfld.long 0x00 4. " PIN4 ,P8.4 input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P8.3 input value" "0,1"
|
|
bitfld.long 0x00 2. " PIN2 ,P8.2 input value" "0,1"
|
|
bitfld.long 0x00 1. " PIN1 ,P8.1 input value" "0,1"
|
|
bitfld.long 0x00 0. " PIN0 ,P8.0 input value" "0,1"
|
|
textline " "
|
|
rgroup.long 0x1C0++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P0,Port P0 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P0.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P0.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P0.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P0.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P0.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P0.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P0.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P0.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
rgroup.long 0x1C4++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P1,Port P1 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P1.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P1.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P1.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P1.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P1.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P1.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P1.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P1.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
rgroup.long 0x1C8++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P2,Port P2 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P2.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P2.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P2.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P2.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P2.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P2.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P2.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P2.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
rgroup.long 0x1CC++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P3,Port P3 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P3.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P3.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P3.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P3.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P3.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P3.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P3.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P3.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
rgroup.long 0x1D0++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P4,Port P4 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P4.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P4.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P4.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P4.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P4.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P4.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P4.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P4.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
rgroup.long 0x1D4++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P5,Port P5 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P5.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P5.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P5.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P5.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P5.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P5.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P5.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P5.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
rgroup.long 0x1D8++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P6,Port P6 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P6.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P6.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P6.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P6.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P6.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P6.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P6.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P6.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
rgroup.long 0x1DC++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P7,Port P7 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P7.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P7.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P7.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P7.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P7.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P7.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P7.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P7.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
rgroup.long 0x1E0++0x03
|
|
line.long 0x00 "GPIO_INT_MODE_P8,Port P8 Interrupt Detection Mode"
|
|
bitfld.long 0x00 28.--30. " PIN7 ,P8.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 24.--26. " PIN6 ,P8.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 20.--22. " PIN5 ,P8.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 16.--18. " PIN4 ,P8.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
textline " "
|
|
bitfld.long 0x00 12.--14. " PIN3 ,P8.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 8.--10. " PIN2 ,P8.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 4.--6. " PIN1 ,P8.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
bitfld.long 0x00 0.--2. " PIN0 ,P8.0 GPIO interrupt detection mode" "Disabled,Falling edge,Rising edge,Rising/falling edge,Low state,High state,Disabled,Disabled"
|
|
group.long 0x200++0x03
|
|
line.long 0x00 "GPIO_INTFL_P0,Port P0 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P0.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P0.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P0.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P0.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P0.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P0.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P0.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P0.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x204++0x03
|
|
line.long 0x00 "GPIO_INTFL_P1,Port P1 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P1.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P1.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P1.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P1.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P1.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P1.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P1.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P1.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x208++0x03
|
|
line.long 0x00 "GPIO_INTFL_P2,Port P2 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P2.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P2.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P2.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P2.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P2.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P2.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P2.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P2.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x20C++0x03
|
|
line.long 0x00 "GPIO_INTFL_P3,Port P3 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P3.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P3.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P3.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P3.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P3.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P3.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P3.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P3.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x210++0x03
|
|
line.long 0x00 "GPIO_INTFL_P4,Port P4 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P4.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P4.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P4.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P4.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P4.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P4.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P4.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P4.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x214++0x03
|
|
line.long 0x00 "GPIO_INTFL_P5,Port P5 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P5.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P5.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P5.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P5.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P5.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P5.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P5.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P5.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x218++0x03
|
|
line.long 0x00 "GPIO_INTFL_P6,Port P6 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P6.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P6.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P6.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P6.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P6.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P6.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P6.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P6.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x21C++0x03
|
|
line.long 0x00 "GPIO_INTFL_P7,Port P7 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P7.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P7.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P7.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P7.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P7.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P7.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P7.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P7.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x220++0x03
|
|
line.long 0x00 "GPIO_INTFL_P8,Port P8 Interrupt Flags"
|
|
eventfld.long 0x00 7. " PIN7 ,P8.7 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 6. " PIN6 ,P8.6 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 5. " PIN5 ,P8.5 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 4. " PIN4 ,P8.4 external interrupt flags" "Not detected,Detected"
|
|
textline " "
|
|
eventfld.long 0x00 3. " PIN3 ,P8.3 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 2. " PIN2 ,P8.2 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 1. " PIN1 ,P8.1 external interrupt flags" "Not detected,Detected"
|
|
eventfld.long 0x00 0. " PIN0 ,P8.0 external interrupt flags" "Not detected,Detected"
|
|
group.long 0x240++0x03
|
|
line.long 0x00 "GPIO_INTEN_P0,Port P0 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P0.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P0.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P0.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P0.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P0.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P0.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P0.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P0.0 external interrupt enable" "Disabled,Enabled"
|
|
group.long 0x244++0x03
|
|
line.long 0x00 "GPIO_INTEN_P1,Port P1 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P1.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P1.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P1.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P1.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P1.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P1.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P1.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P1.0 external interrupt enable" "Disabled,Enabled"
|
|
group.long 0x248++0x03
|
|
line.long 0x00 "GPIO_INTEN_P2,Port P2 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P2.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P2.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P2.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P2.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P2.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P2.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P2.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P2.0 external interrupt enable" "Disabled,Enabled"
|
|
group.long 0x24C++0x03
|
|
line.long 0x00 "GPIO_INTEN_P3,Port P3 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P3.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P3.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P3.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P3.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P3.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P3.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P3.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P3.0 external interrupt enable" "Disabled,Enabled"
|
|
group.long 0x250++0x03
|
|
line.long 0x00 "GPIO_INTEN_P4,Port P4 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P4.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P4.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P4.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P4.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P4.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P4.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P4.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P4.0 external interrupt enable" "Disabled,Enabled"
|
|
group.long 0x254++0x03
|
|
line.long 0x00 "GPIO_INTEN_P5,Port P5 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P5.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P5.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P5.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P5.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P5.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P5.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P5.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P5.0 external interrupt enable" "Disabled,Enabled"
|
|
group.long 0x258++0x03
|
|
line.long 0x00 "GPIO_INTEN_P6,Port P6 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P6.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P6.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P6.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P6.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P6.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P6.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P6.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P6.0 external interrupt enable" "Disabled,Enabled"
|
|
group.long 0x25C++0x03
|
|
line.long 0x00 "GPIO_INTEN_P7,Port P7 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P7.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P7.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P7.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P7.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P7.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P7.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P7.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P7.0 external interrupt enable" "Disabled,Enabled"
|
|
group.long 0x260++0x03
|
|
line.long 0x00 "GPIO_INTEN_P8,Port P8 Interrupt Enables"
|
|
bitfld.long 0x00 7. " PIN7 ,P8.7 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PIN6 ,P8.6 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PIN5 ,P8.5 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PIN4 ,P8.4 external interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PIN3 ,P8.3 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PIN2 ,P8.2 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PIN1 ,P8.1 external interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PIN0 ,P8.0 external interrupt enable" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "IOMAN (IOMAN)"
|
|
base ad:0x40000C00
|
|
width 20.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "IOMAN_WUD_REQ0,Wakeup Detect Mode Request Register 0"
|
|
bitfld.long 0x00 31. " WUD_REQ_P3 ,Wakeup detect request mode: P3.7" "No effect,Requested"
|
|
bitfld.long 0x00 30. " WUD_REQ_P3 ,wakeup detect request mode: P3.6" "No effect,Requested"
|
|
bitfld.long 0x00 29. " WUD_REQ_P3 ,wakeup detect request mode: P3.5" "No effect,Requested"
|
|
bitfld.long 0x00 28. " WUD_REQ_P3 ,wakeup detect request mode: P3.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 27. " WUD_REQ_P3 ,wakeup detect request mode: P3.3" "No effect,Requested"
|
|
bitfld.long 0x00 26. " WUD_REQ_P3 ,wakeup detect request mode: P3.2" "No effect,Requested"
|
|
bitfld.long 0x00 25. " WUD_REQ_P3 ,wakeup detect request mode: P3.1" "No effect,Requested"
|
|
bitfld.long 0x00 24. " WUD_REQ_P3 ,wakeup detect request mode: P3.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 23. " WUD_REQ_P2 ,wakeup detect request mode: P2.7" "No effect,Requested"
|
|
bitfld.long 0x00 22. " WUD_REQ_P2 ,wakeup detect request mode: P2.6" "No effect,Requested"
|
|
bitfld.long 0x00 21. " WUD_REQ_P2 ,wakeup detect request mode: P2.5" "No effect,Requested"
|
|
bitfld.long 0x00 20. " WUD_REQ_P2 ,wakeup detect request mode: P2.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 19. " WUD_REQ_P2 ,wakeup detect request mode: P2.3" "No effect,Requested"
|
|
bitfld.long 0x00 18. " WUD_REQ_P2 ,wakeup detect request mode: P2.2" "No effect,Requested"
|
|
bitfld.long 0x00 17. " WUD_REQ_P2 ,wakeup detect request mode: P2.1" "No effect,Requested"
|
|
bitfld.long 0x00 16. " WUD_REQ_P2 ,wakeup detect request mode: P2.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 15. " WUD_REQ_P1 ,wakeup detect request mode: P1.7" "No effect,Requested"
|
|
bitfld.long 0x00 14. " WUD_REQ_P1 ,wakeup detect request mode: P1.6" "No effect,Requested"
|
|
bitfld.long 0x00 13. " WUD_REQ_P1 ,wakeup detect request mode: P1.5" "No effect,Requested"
|
|
bitfld.long 0x00 12. " WUD_REQ_P1 ,wakeup detect request mode: P1.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 11. " WUD_REQ_P1 ,wakeup detect request mode: P1.3" "No effect,Requested"
|
|
bitfld.long 0x00 10. " WUD_REQ_P1 ,wakeup detect request mode: P1.2" "No effect,Requested"
|
|
bitfld.long 0x00 9. " WUD_REQ_P1 ,wakeup detect request mode: P1.1" "No effect,Requested"
|
|
bitfld.long 0x00 8. " WUD_REQ_P1 ,wakeup detect request mode: P1.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 7. " WUD_REQ_P0 ,wakeup detect request mode: P0.7" "No effect,Requested"
|
|
bitfld.long 0x00 6. " WUD_REQ_P0 ,wakeup detect request mode: P0.6" "No effect,Requested"
|
|
bitfld.long 0x00 5. " WUD_REQ_P0 ,wakeup detect request mode: P0.5" "No effect,Requested"
|
|
bitfld.long 0x00 4. " WUD_REQ_P0 ,wakeup detect request mode: P0.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 3. " WUD_REQ_P0 ,wakeup detect request mode: P0.3" "No effect,Requested"
|
|
bitfld.long 0x00 2. " WUD_REQ_P0 ,wakeup detect request mode: P0.2" "No effect,Requested"
|
|
bitfld.long 0x00 1. " WUD_REQ_P0 ,wakeup detect request mode: P0.1" "No effect,Requested"
|
|
bitfld.long 0x00 0. " WUD_REQ_P0 ,wakeup detect request mode: P0.0" "No effect,Requested"
|
|
line.long 0x04 "IOMAN_WUD_REQ1,Wakeup Detect Mode Request Register 1"
|
|
bitfld.long 0x04 31. " WUD_REQ_P7 ,wakeup detect request mode: P7.7" "No effect,Requested"
|
|
bitfld.long 0x04 30. " WUD_REQ_P7 ,wakeup detect request mode: P7.6" "No effect,Requested"
|
|
bitfld.long 0x04 29. " WUD_REQ_P7 ,wakeup detect request mode: P7.5" "No effect,Requested"
|
|
bitfld.long 0x04 28. " WUD_REQ_P7 ,wakeup detect request mode: P7.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 27. " WUD_REQ_P7 ,wakeup detect request mode: P7.3" "No effect,Requested"
|
|
bitfld.long 0x04 26. " WUD_REQ_P7 ,wakeup detect request mode: P7.2" "No effect,Requested"
|
|
bitfld.long 0x04 25. " WUD_REQ_P7 ,wakeup detect request mode: P7.1" "No effect,Requested"
|
|
bitfld.long 0x04 24. " WUD_REQ_P7 ,wakeup detect request mode: P7.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 23. " WUD_REQ_P6 ,wakeup detect request mode: P6.7" "No effect,Requested"
|
|
bitfld.long 0x04 22. " WUD_REQ_P6 ,wakeup detect request mode: P6.6" "No effect,Requested"
|
|
bitfld.long 0x04 21. " WUD_REQ_P6 ,wakeup detect request mode: P6.5" "No effect,Requested"
|
|
bitfld.long 0x04 20. " WUD_REQ_P6 ,wakeup detect request mode: P6.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 19. " WUD_REQ_P6 ,wakeup detect request mode: P6.3" "No effect,Requested"
|
|
bitfld.long 0x04 18. " WUD_REQ_P6 ,wakeup detect request mode: P6.2" "No effect,Requested"
|
|
bitfld.long 0x04 17. " WUD_REQ_P6 ,wakeup detect request mode: P6.1" "No effect,Requested"
|
|
bitfld.long 0x04 16. " WUD_REQ_P6 ,wakeup detect request mode: P6.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 15. " WUD_REQ_P5 ,wakeup detect request mode: P5.7" "No effect,Requested"
|
|
bitfld.long 0x04 14. " WUD_REQ_P5 ,wakeup detect request mode: P5.6" "No effect,Requested"
|
|
bitfld.long 0x04 13. " WUD_REQ_P5 ,wakeup detect request mode: P5.5" "No effect,Requested"
|
|
bitfld.long 0x04 12. " WUD_REQ_P5 ,wakeup detect request mode: P5.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 11. " WUD_REQ_P5 ,wakeup detect request mode: P5.3" "No effect,Requested"
|
|
bitfld.long 0x04 10. " WUD_REQ_P5 ,wakeup detect request mode: P5.2" "No effect,Requested"
|
|
bitfld.long 0x04 9. " WUD_REQ_P5 ,wakeup detect request mode: P5.1" "No effect,Requested"
|
|
bitfld.long 0x04 8. " WUD_REQ_P5 ,wakeup detect request mode: P5.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 7. " WUD_REQ_P4 ,wakeup detect request mode: P4.7" "No effect,Requested"
|
|
bitfld.long 0x04 6. " WUD_REQ_P4 ,wakeup detect request mode: P4.6" "No effect,Requested"
|
|
bitfld.long 0x04 5. " WUD_REQ_P4 ,wakeup detect request mode: P4.5" "No effect,Requested"
|
|
bitfld.long 0x04 4. " WUD_REQ_P4 ,wakeup detect request mode: P4.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 3. " WUD_REQ_P4 ,wakeup detect request mode: P4.3" "No effect,Requested"
|
|
bitfld.long 0x04 2. " WUD_REQ_P4 ,wakeup detect request mode: P4.2" "No effect,Requested"
|
|
bitfld.long 0x04 1. " WUD_REQ_P4 ,wakeup detect request mode: P4.1" "No effect,Requested"
|
|
bitfld.long 0x04 0. " WUD_REQ_P4 ,wakeup detect request mode: P4.0" "No effect,Requested"
|
|
rgroup.long 0x08++0x07
|
|
line.long 0x00 "IOMAN_WUD_ACK0,Wakeup Detect Mode Acknowledge Register 0"
|
|
bitfld.long 0x00 31. " WUD_ACK_P3 ,WUD mode acknowledge: P3.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " WUD_ACK_P3 ,WUD mode acknowledge: P3.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 29. " WUD_ACK_P3 ,WUD mode acknowledge: P3.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 28. " WUD_ACK_P3 ,WUD mode acknowledge: P3.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 27. " WUD_ACK_P3 ,WUD mode acknowledge: P3.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 26. " WUD_ACK_P3 ,WUD mode acknowledge: P3.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " WUD_ACK_P3 ,WUD mode acknowledge: P3.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 24. " WUD_ACK_P3 ,WUD mode acknowledge: P3.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 23. " WUD_ACK_P2 ,WUD mode acknowledge: P2.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " WUD_ACK_P2 ,WUD mode acknowledge: P2.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " WUD_ACK_P2 ,WUD mode acknowledge: P2.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " WUD_ACK_P2 ,WUD mode acknowledge: P2.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19. " WUD_ACK_P2 ,WUD mode acknowledge: P2.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 18. " WUD_ACK_P2 ,WUD mode acknowledge: P2.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " WUD_ACK_P2 ,WUD mode acknowledge: P2.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " WUD_ACK_P2 ,WUD mode acknowledge: P2.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " WUD_ACK_P1 ,WUD mode acknowledge: P1.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " WUD_ACK_P1 ,WUD mode acknowledge: P1.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " WUD_ACK_P1 ,WUD mode acknowledge: P1.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " WUD_ACK_P1 ,WUD mode acknowledge: P1.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11. " WUD_ACK_P1 ,WUD mode acknowledge: P1.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " WUD_ACK_P1 ,WUD mode acknowledge: P1.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " WUD_ACK_P1 ,WUD mode acknowledge: P1.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " WUD_ACK_P1 ,WUD mode acknowledge: P1.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " WUD_ACK_P0 ,WUD mode acknowledge: P0.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " WUD_ACK_P0 ,WUD mode acknowledge: P0.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " WUD_ACK_P0 ,WUD mode acknowledge: P0.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " WUD_ACK_P0 ,WUD mode acknowledge: P0.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " WUD_ACK_P0 ,WUD mode acknowledge: P0.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " WUD_ACK_P0 ,WUD mode acknowledge: P0.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " WUD_ACK_P0 ,WUD mode acknowledge: P0.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " WUD_ACK_P0 ,WUD mode acknowledge: P0.0" "Disabled,Enabled"
|
|
line.long 0x04 "IOMAN_WUD_ACK1,Wakeup Detect Mode Acknowledge Register 1"
|
|
bitfld.long 0x04 31. " WUD_ACK_P7 ,WUD mode acknowledge: P7.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 30. " WUD_ACK_P7 ,WUD mode acknowledge: P7.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 29. " WUD_ACK_P7 ,WUD mode acknowledge: P7.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 28. " WUD_ACK_P7 ,WUD mode acknowledge: P7.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 27. " WUD_ACK_P7 ,WUD mode acknowledge: P7.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 26. " WUD_ACK_P7 ,WUD mode acknowledge: P7.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 25. " WUD_ACK_P7 ,WUD mode acknowledge: P7.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 24. " WUD_ACK_P7 ,WUD mode acknowledge: P7.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 23. " WUD_ACK_P6 ,WUD mode acknowledge: P6.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 22. " WUD_ACK_P6 ,WUD mode acknowledge: P6.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 21. " WUD_ACK_P6 ,WUD mode acknowledge: P6.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 20. " WUD_ACK_P6 ,WUD mode acknowledge: P6.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 19. " WUD_ACK_P6 ,WUD mode acknowledge: P6.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 18. " WUD_ACK_P6 ,WUD mode acknowledge: P6.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 17. " WUD_ACK_P6 ,WUD mode acknowledge: P6.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 16. " WUD_ACK_P6 ,WUD mode acknowledge: P6.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 15. " WUD_ACK_P5 ,WUD mode acknowledge: P5.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 14. " WUD_ACK_P5 ,WUD mode acknowledge: P5.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 13. " WUD_ACK_P5 ,WUD mode acknowledge: P5.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 12. " WUD_ACK_P5 ,WUD mode acknowledge: P5.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 11. " WUD_ACK_P5 ,WUD mode acknowledge: P5.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 10. " WUD_ACK_P5 ,WUD mode acknowledge: P5.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 9. " WUD_ACK_P5 ,WUD mode acknowledge: P5.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 8. " WUD_ACK_P5 ,WUD mode acknowledge: P5.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 7. " WUD_ACK_P4 ,WUD mode acknowledge: P4.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 6. " WUD_ACK_P4 ,WUD mode acknowledge: P4.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 5. " WUD_ACK_P4 ,WUD mode acknowledge: P4.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " WUD_ACK_P4 ,WUD mode acknowledge: P4.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 3. " WUD_ACK_P4 ,WUD mode acknowledge: P4.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 2. " WUD_ACK_P4 ,WUD mode acknowledge: P4.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 1. " WUD_ACK_P4 ,WUD mode acknowledge: P4.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " WUD_ACK_P4 ,WUD mode acknowledge: P4.0" "Disabled,Enabled"
|
|
group.long 0x10++0x07
|
|
line.long 0x00 "IOMAN_ALI_REQ0,Analog Input Request Register 0"
|
|
bitfld.long 0x00 31. " ALI_REQ_P3 ,Analog input mode request: P3.7" "No effect,Requested"
|
|
bitfld.long 0x00 30. " ALI_REQ_P3 ,Analog input mode request: P3.6" "No effect,Requested"
|
|
bitfld.long 0x00 29. " ALI_REQ_P3 ,Analog input mode request: P3.5" "No effect,Requested"
|
|
bitfld.long 0x00 28. " ALI_REQ_P3 ,Analog input mode request: P3.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 27. " ALI_REQ_P3 ,Analog input mode request: P3.3" "No effect,Requested"
|
|
bitfld.long 0x00 26. " ALI_REQ_P3 ,Analog input mode request: P3.2" "No effect,Requested"
|
|
bitfld.long 0x00 25. " ALI_REQ_P3 ,Analog input mode request: P3.1" "No effect,Requested"
|
|
bitfld.long 0x00 24. " ALI_REQ_P3 ,Analog input mode request: P3.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 23. " ALI_REQ_P2 ,Analog input mode request: P2.7" "No effect,Requested"
|
|
bitfld.long 0x00 22. " ALI_REQ_P2 ,Analog input mode request: P2.6" "No effect,Requested"
|
|
bitfld.long 0x00 21. " ALI_REQ_P2 ,Analog input mode request: P2.5" "No effect,Requested"
|
|
bitfld.long 0x00 20. " ALI_REQ_P2 ,Analog input mode request: P2.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ALI_REQ_P2 ,Analog input mode request: P2.3" "No effect,Requested"
|
|
bitfld.long 0x00 18. " ALI_REQ_P2 ,Analog input mode request: P2.2" "No effect,Requested"
|
|
bitfld.long 0x00 17. " ALI_REQ_P2 ,Analog input mode request: P2.1" "No effect,Requested"
|
|
bitfld.long 0x00 16. " ALI_REQ_P2 ,Analog input mode request: P2.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 15. " ALI_REQ_P1 ,Analog input mode request: P1.7" "No effect,Requested"
|
|
bitfld.long 0x00 14. " ALI_REQ_P1 ,Analog input mode request: P1.6" "No effect,Requested"
|
|
bitfld.long 0x00 13. " ALI_REQ_P1 ,Analog input mode request: P1.5" "No effect,Requested"
|
|
bitfld.long 0x00 12. " ALI_REQ_P1 ,Analog input mode request: P1.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 11. " ALI_REQ_P1 ,Analog input mode request: P1.3" "No effect,Requested"
|
|
bitfld.long 0x00 10. " ALI_REQ_P1 ,Analog input mode request: P1.2" "No effect,Requested"
|
|
bitfld.long 0x00 9. " ALI_REQ_P1 ,Analog input mode request: P1.1" "No effect,Requested"
|
|
bitfld.long 0x00 8. " ALI_REQ_P1 ,Analog input mode request: P1.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ALI_REQ_P0 ,Analog input mode request: P0.7" "No effect,Requested"
|
|
bitfld.long 0x00 6. " ALI_REQ_P0 ,Analog input mode request: P0.6" "No effect,Requested"
|
|
bitfld.long 0x00 5. " ALI_REQ_P0 ,Analog input mode request: P0.5" "No effect,Requested"
|
|
bitfld.long 0x00 4. " ALI_REQ_P0 ,Analog input mode request: P0.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 3. " ALI_REQ_P0 ,Analog input mode request: P0.3" "No effect,Requested"
|
|
bitfld.long 0x00 2. " ALI_REQ_P0 ,Analog input mode request: P0.2" "No effect,Requested"
|
|
bitfld.long 0x00 1. " ALI_REQ_P0 ,Analog input mode request: P0.1" "No effect,Requested"
|
|
bitfld.long 0x00 0. " ALI_REQ_P0 ,Analog input mode request: P0.0" "No effect,Requested"
|
|
line.long 0x04 "IOMAN_ALI_REQ1,Analog Input Request Register 1"
|
|
bitfld.long 0x04 31. " ALI_REQ_P7 ,Analog input mode request: P7.7" "No effect,Requested"
|
|
bitfld.long 0x04 30. " ALI_REQ_P7 ,Analog input mode request: P7.6" "No effect,Requested"
|
|
bitfld.long 0x04 29. " ALI_REQ_P7 ,Analog input mode request: P7.5" "No effect,Requested"
|
|
bitfld.long 0x04 28. " ALI_REQ_P7 ,Analog input mode request: P7.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 27. " ALI_REQ_P7 ,Analog input mode request: P7.3" "No effect,Requested"
|
|
bitfld.long 0x04 26. " ALI_REQ_P7 ,Analog input mode request: P7.2" "No effect,Requested"
|
|
bitfld.long 0x04 25. " ALI_REQ_P7 ,Analog input mode request: P7.1" "No effect,Requested"
|
|
bitfld.long 0x04 24. " ALI_REQ_P7 ,Analog input mode request: P7.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 23. " ALI_REQ_P6 ,Analog input mode request: P6.7" "No effect,Requested"
|
|
bitfld.long 0x04 22. " ALI_REQ_P6 ,Analog input mode request: P6.6" "No effect,Requested"
|
|
bitfld.long 0x04 21. " ALI_REQ_P6 ,Analog input mode request: P6.5" "No effect,Requested"
|
|
bitfld.long 0x04 20. " ALI_REQ_P6 ,Analog input mode request: P6.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ALI_REQ_P6 ,Analog input mode request: P6.3" "No effect,Requested"
|
|
bitfld.long 0x04 18. " ALI_REQ_P6 ,Analog input mode request: P6.2" "No effect,Requested"
|
|
bitfld.long 0x04 17. " ALI_REQ_P6 ,Analog input mode request: P6.1" "No effect,Requested"
|
|
bitfld.long 0x04 16. " ALI_REQ_P6 ,Analog input mode request: P6.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 15. " ALI_REQ_P5 ,Analog input mode request: P5.7" "No effect,Requested"
|
|
bitfld.long 0x04 14. " ALI_REQ_P5 ,Analog input mode request: P5.6" "No effect,Requested"
|
|
bitfld.long 0x04 13. " ALI_REQ_P5 ,Analog input mode request: P5.5" "No effect,Requested"
|
|
bitfld.long 0x04 12. " ALI_REQ_P5 ,Analog input mode request: P5.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 11. " ALI_REQ_P5 ,Analog input mode request: P5.3" "No effect,Requested"
|
|
bitfld.long 0x04 10. " ALI_REQ_P5 ,Analog input mode request: P5.2" "No effect,Requested"
|
|
bitfld.long 0x04 9. " ALI_REQ_P5 ,Analog input mode request: P5.1" "No effect,Requested"
|
|
bitfld.long 0x04 8. " ALI_REQ_P5 ,Analog input mode request: P5.0" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ALI_REQ_P4 ,Analog input mode request: P4.7" "No effect,Requested"
|
|
bitfld.long 0x04 6. " ALI_REQ_P4 ,Analog input mode request: P4.6" "No effect,Requested"
|
|
bitfld.long 0x04 5. " ALI_REQ_P4 ,Analog input mode request: P4.5" "No effect,Requested"
|
|
bitfld.long 0x04 4. " ALI_REQ_P4 ,Analog input mode request: P4.4" "No effect,Requested"
|
|
textline " "
|
|
bitfld.long 0x04 3. " ALI_REQ_P4 ,Analog input mode request: P4.3" "No effect,Requested"
|
|
bitfld.long 0x04 2. " ALI_REQ_P4 ,Analog input mode request: P4.2" "No effect,Requested"
|
|
bitfld.long 0x04 1. " ALI_REQ_P4 ,Analog input mode request: P4.1" "No effect,Requested"
|
|
bitfld.long 0x04 0. " ALI_REQ_P4 ,Analog input mode request: P4.0" "No effect,Requested"
|
|
rgroup.long 0x18++0x07
|
|
line.long 0x00 "IOMAN_ALI_ACK0,Analog Input Acknowledge Register 0"
|
|
bitfld.long 0x00 31. " ALI_ACK_P3 ,Analog in mode acknowledge: P3.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " ALI_ACK_P3 ,Analog in mode acknowledge: P3.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 29. " ALI_ACK_P3 ,Analog in mode acknowledge: P3.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 28. " ALI_ACK_P3 ,Analog in mode acknowledge: P3.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 27. " ALI_ACK_P3 ,Analog in mode acknowledge: P3.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 26. " ALI_ACK_P3 ,Analog in mode acknowledge: P3.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " ALI_ACK_P3 ,Analog in mode acknowledge: P3.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 24. " ALI_ACK_P3 ,Analog in mode acknowledge: P3.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 23. " ALI_ACK_P2 ,Analog in mode acknowledge: P2.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " ALI_ACK_P2 ,Analog in mode acknowledge: P2.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " ALI_ACK_P2 ,Analog in mode acknowledge: P2.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " ALI_ACK_P2 ,Analog in mode acknowledge: P2.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19. " ALI_ACK_P2 ,Analog in mode acknowledge: P2.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 18. " ALI_ACK_P2 ,Analog in mode acknowledge: P2.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " ALI_ACK_P2 ,Analog in mode acknowledge: P2.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " ALI_ACK_P2 ,Analog in mode acknowledge: P2.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " ALI_ACK_P1 ,Analog in mode acknowledge: P1.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " ALI_ACK_P1 ,Analog in mode acknowledge: P1.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " ALI_ACK_P1 ,Analog in mode acknowledge: P1.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " ALI_ACK_P1 ,Analog in mode acknowledge: P1.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11. " ALI_ACK_P1 ,Analog in mode acknowledge: P1.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " ALI_ACK_P1 ,Analog in mode acknowledge: P1.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " ALI_ACK_P1 ,Analog in mode acknowledge: P1.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " ALI_ACK_P1 ,Analog in mode acknowledge: P1.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " ALI_ACK_P0 ,Analog in mode acknowledge: P0.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " ALI_ACK_P0 ,Analog in mode acknowledge: P0.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " ALI_ACK_P0 ,Analog in mode acknowledge: P0.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " ALI_ACK_P0 ,Analog in mode acknowledge: P0.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " ALI_ACK_P0 ,Analog in mode acknowledge: P0.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " ALI_ACK_P0 ,Analog in mode acknowledge: P0.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " ALI_ACK_P0 ,Analog in mode acknowledge: P0.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " ALI_ACK_P0 ,Analog in mode acknowledge: P0.0" "Disabled,Enabled"
|
|
line.long 0x04 "IOMAN_ALI_ACK1,Analog Input Acknowledge Register 1"
|
|
bitfld.long 0x04 31. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 30. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 29. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 28. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 27. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 26. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 25. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 24. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 23. " ALI_ACK_P6 ,Analog in mode acknowledge: P6.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 22. " ALI_ACK_P6 ,Analog in mode acknowledge: P6.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 21. " ALI_ACK_P6 ,Analog in mode acknowledge: P6.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 20. " ALI_ACK_P6 ,Analog in mode acknowledge: P6.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 19. " ALI_ACK_P6 ,Analog in mode acknowledge: P6.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 18. " ALI_ACK_P6 ,Analog in mode acknowledge: P6.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 17. " ALI_ACK_P6 ,Analog in mode acknowledge: P6.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 16. " ALI_ACK_P6 ,Analog in mode acknowledge: P6.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 15. " ALI_ACK_P5 ,Analog in mode acknowledge: P5.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 14. " ALI_ACK_P5 ,Analog in mode acknowledge: P5.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 13. " ALI_ACK_P5 ,Analog in mode acknowledge: P5.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 12. " ALI_ACK_P5 ,Analog in mode acknowledge: P5.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 11. " ALI_ACK_P5 ,Analog in mode acknowledge: P5.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 10. " ALI_ACK_P5 ,Analog in mode acknowledge: P5.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 9. " ALI_ACK_P5 ,Analog in mode acknowledge: P5.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 8. " ALI_ACK_P5 ,Analog in mode acknowledge: P5.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 7. " ALI_ACK_P4 ,Analog in mode acknowledge: P4.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 6. " ALI_ACK_P4 ,Analog in mode acknowledge: P4.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 5. " ALI_ACK_P4 ,Analog in mode acknowledge: P4.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " ALI_ACK_P4 ,Analog in mode acknowledge: P4.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 3. " ALI_ACK_P4 ,Analog in mode acknowledge: P4.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 2. " ALI_ACK_P4 ,Analog in mode acknowledge: P4.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 1. " ALI_ACK_P4 ,Analog in mode acknowledge: P4.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " ALI_ACK_P4 ,Analog in mode acknowledge: P4.0" "Disabled,Enabled"
|
|
group.long 0x20++0x0B
|
|
line.long 0x00 "IOMAN_ALI_CONNECT0,Analog I/O Connection Control Register 0"
|
|
bitfld.long 0x00 31. " GPIO31 ,Analog connection input for GPIO 31" "0,1"
|
|
bitfld.long 0x00 30. " GPIO30 ,Analog connection input for GPIO 30" "0,1"
|
|
bitfld.long 0x00 29. " GPIO29 ,Analog connection input for GPIO 29" "0,1"
|
|
bitfld.long 0x00 28. " GPIO28 ,Analog connection input for GPIO 28" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 27. " GPIO27 ,Analog connection input for GPIO 27" "0,1"
|
|
bitfld.long 0x00 26. " GPIO26 ,Analog connection input for GPIO 26" "0,1"
|
|
bitfld.long 0x00 25. " GPIO25 ,Analog connection input for GPIO 25" "0,1"
|
|
bitfld.long 0x00 24. " GPIO24 ,Analog connection input for GPIO 24" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 23. " GPIO23 ,Analog connection input for GPIO 23" "0,1"
|
|
bitfld.long 0x00 22. " GPIO22 ,Analog connection input for GPIO 22" "0,1"
|
|
bitfld.long 0x00 21. " GPIO21 ,Analog connection input for GPIO 21" "0,1"
|
|
bitfld.long 0x00 20. " GPIO20 ,Analog connection input for GPIO 20" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 19. " GPIO19 ,Analog connection input for GPIO 19" "0,1"
|
|
bitfld.long 0x00 18. " GPIO18 ,Analog connection input for GPIO 18" "0,1"
|
|
bitfld.long 0x00 17. " GPIO17 ,Analog connection input for GPIO 17" "0,1"
|
|
bitfld.long 0x00 16. " GPIO16 ,Analog connection input for GPIO 16" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 15. " GPIO15 ,Analog connection input for GPIO 15" "0,1"
|
|
bitfld.long 0x00 14. " GPIO14 ,Analog connection input for GPIO 14" "0,1"
|
|
bitfld.long 0x00 13. " GPIO13 ,Analog connection input for GPIO 13" "0,1"
|
|
bitfld.long 0x00 12. " GPIO12 ,Analog connection input for GPIO 12" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 11. " GPIO11 ,Analog connection input for GPIO 11" "0,1"
|
|
bitfld.long 0x00 10. " GPIO10 ,Analog connection input for GPIO 10" "0,1"
|
|
bitfld.long 0x00 9. " GPIO9 ,Analog connection input for GPIO 9" "0,1"
|
|
bitfld.long 0x00 8. " GPIO8 ,Analog connection input for GPIO 8" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 7. " GPIO7 ,Analog connection input for GPIO 7" "0,1"
|
|
bitfld.long 0x00 6. " GPIO6 ,Analog connection input for GPIO 6" "0,1"
|
|
bitfld.long 0x00 5. " GPIO5 ,Analog connection input for GPIO 5" "0,1"
|
|
bitfld.long 0x00 4. " GPIO4 ,Analog connection input for GPIO 4" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " GPIO3 ,Analog connection input for GPIO 3" "0,1"
|
|
bitfld.long 0x00 2. " GPIO2 ,Analog connection input for GPIO 2" "0,1"
|
|
bitfld.long 0x00 1. " GPIO1 ,Analog connection input for GPIO 1" "0,1"
|
|
bitfld.long 0x00 0. " GPIO0 ,Analog connection input for GPIO 0" "0,1"
|
|
line.long 0x04 "IOMAN_ALI_CONNECT1,Analog I/O Connection Control Register 1"
|
|
bitfld.long 0x04 7. " GPIO39 ,Analog connection input for GPIO 39" "0,1"
|
|
bitfld.long 0x04 6. " GPIO38 ,Analog connection input for GPIO 38" "0,1"
|
|
bitfld.long 0x04 5. " GPIO37 ,Analog connection input for GPIO 37" "0,1"
|
|
bitfld.long 0x04 4. " GPIO36 ,Analog connection input for GPIO 36" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 3. " GPIO35 ,Analog connection input for GPIO 35" "0,1"
|
|
bitfld.long 0x04 2. " GPIO34 ,Analog connection input for GPIO 34" "0,1"
|
|
bitfld.long 0x04 1. " GPIO33 ,Analog connection input for GPIO 33" "0,1"
|
|
bitfld.long 0x04 0. " GPIO32 ,Analog connection input for GPIO 32" "0,1"
|
|
line.long 0x08 "IOMAN_SPIX_REQ,SPIX I/O Mode Request"
|
|
bitfld.long 0x08 16. " FAST_MODE ,SPIX fast mode request" "Not requested,Requested"
|
|
bitfld.long 0x08 12. " QUAD_IO_REQ ,SPIX quad I/O request" "Not requested,Requested"
|
|
bitfld.long 0x08 10. " SS2_IO_REQ ,SPIX SS.2 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x08 9. " SS1_IO_REQ ,SPIX SS.1 I/O request" "Not requested,Requested"
|
|
textline " "
|
|
bitfld.long 0x08 8. " SS0_IO_REQ ,SPIX SS.0 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x08 4. " CORE_IO_REQ ,SPIX core I/O request" "Not requested,Requested"
|
|
rgroup.long 0x2C++0x03
|
|
line.long 0x00 "IOMAN_SPIX_ACK,SPIX I/O Mode Acknowledge"
|
|
bitfld.long 0x00 16. " FAST_MODE ,SPIX fast mode acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " QUAD_IO_ACK ,SPIX quad I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " SS2_IO_ACK ,SPIX SS.2 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " SS1_IO_ACK ,SPIX SS.1 I/O acknowledge" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 8. " SS0_IO_ACK ,SPIX SS.0 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CORE_IO_ACK ,SPIX core I/O acknowledge" "Disabled,Enabled"
|
|
group.long 0x30++0x03
|
|
line.long 0x00 "IOMAN_UART0_REQ,UART0 I/O Mode Request"
|
|
bitfld.long 0x00 6. " RTS_IO_REQ ,UART0 RTS I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 5. " CTS_IO_REQ ,UART0 CTS I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 4. " IO_REQ ,UART0 TX/RX I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 2. " RTS_MAP ,UART0 RTS I/O mapping select" "A,B"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTS_MAP ,UART0 CTS I/O mapping select" "A,B"
|
|
bitfld.long 0x00 0. " IO_MAP ,UART0 TX/RX I/O mapping select" "A,B"
|
|
rgroup.long 0x34++0x03
|
|
line.long 0x00 "IOMAN_UART0_ACK,UART0 I/O Mode Acknowledge"
|
|
bitfld.long 0x00 6. " RTS_IO_ACK ,UART0 RTS I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " CTS_IO_ACK ,UART0 CTS I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " IO_ACK ,UART0 TX/RX I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " RTS_MAP ,UART0 RTS I/O mapping acknowledge" "A,B"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTS_MAP ,UART0 CTS I/O mapping acknowledge" "A,B"
|
|
bitfld.long 0x00 0. " IO_MAP ,UART0 TX/RX I/O mapping acknowledge" "A,B"
|
|
group.long 0x38++0x03
|
|
line.long 0x00 "IOMAN_UART1_REQ,UART1 I/O Mode Request"
|
|
bitfld.long 0x00 6. " RTS_IO_REQ ,UART1 RTS I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 5. " CTS_IO_REQ ,UART1 CTS I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 4. " IO_REQ ,UART1 TX/RX I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 2. " RTS_MAP ,UART1 RTS I/O mapping select" "A,B"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTS_MAP ,UART1 CTS I/O mapping select" "A,B"
|
|
bitfld.long 0x00 0. " IO_MAP ,UART1 TX/RX I/O mapping select" "A,B"
|
|
rgroup.long 0x3C++0x03
|
|
line.long 0x00 "IOMAN_UART0_ACK,UART1 I/O Mode Acknowledge"
|
|
bitfld.long 0x00 6. " RTS_IO_ACK ,UART1 RTS I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " CTS_IO_ACK ,UART1 CTS I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " IO_ACK ,UART1 TX/RX I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " RTS_MAP ,UART1 RTS I/O mapping acknowledge" "A,B"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTS_MAP ,UART1 CTS I/O mapping acknowledge" "A,B"
|
|
bitfld.long 0x00 0. " IO_MAP ,UART1 TX/RX I/O mapping acknowledge" "A,B"
|
|
group.long 0x40++0x03
|
|
line.long 0x00 "IOMAN_UART2_REQ,UART2 I/O Mode Request"
|
|
bitfld.long 0x00 6. " RTS_IO_REQ ,UART2 RTS I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 5. " CTS_IO_REQ ,UART2 CTS I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 4. " IO_REQ ,UART2 TX/RX I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 2. " RTS_MAP ,UART2 RTS I/O mapping select" "A,B"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTS_MAP ,UART2 CTS I/O mapping select" "A,B"
|
|
bitfld.long 0x00 0. " IO_MAP ,UART2 TX/RX I/O mapping select" "A,B"
|
|
rgroup.long 0x44++0x03
|
|
line.long 0x00 "IOMAN_UART2_ACK,UART2 I/O Mode Acknowledge"
|
|
bitfld.long 0x00 6. " RTS_IO_ACK ,UART2 RTS I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " CTS_IO_ACK ,UART2 CTS I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " IO_ACK ,UART2 TX/RX I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " RTS_MAP ,UART2 RTS I/O mapping acknowledge" "A,B"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTS_MAP ,UART2 CTS I/O mapping acknowledge" "A,B"
|
|
bitfld.long 0x00 0. " IO_MAP ,UART2 TX/RX I/O mapping acknowledge" "A,B"
|
|
group.long 0x48++0x03
|
|
line.long 0x00 "IOMAN_UART3_REQ,UART3 I/O Mode Request"
|
|
bitfld.long 0x00 6. " RTS_IO_REQ ,UART3 RTS I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 5. " CTS_IO_REQ ,UART3 CTS I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 4. " IO_REQ ,UART3 TX/RX I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 2. " RTS_MAP ,UART3 RTS I/O mapping select" "A,B"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTS_MAP ,UART3 CTS I/O mapping select" "A,B"
|
|
bitfld.long 0x00 0. " IO_MAP ,UART3 TX/RX I/O mapping select" "A,B"
|
|
rgroup.long 0x4C++0x03
|
|
line.long 0x00 "IOMAN_UART3_ACK,UART3 I/O Mode Acknowledge"
|
|
bitfld.long 0x00 6. " RTS_IO_ACK ,UART3 RTS I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " CTS_IO_ACK ,UART3 CTS I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " IO_ACK ,UART3 TX/RX I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " RTS_MAP ,UART3 RTS I/O mapping acknowledge" "A,B"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CTS_MAP ,UART3 CTS I/O mapping acknowledge" "A,B"
|
|
bitfld.long 0x00 0. " IO_MAP ,UART3 TX/RX I/O mapping acknowledge" "A,B"
|
|
group.long 0x50++0x03
|
|
line.long 0x00 "IOMAN_I2CM0_REQ,I2C Master 0 I/O Request"
|
|
bitfld.long 0x00 4. " MAPPING_REQ ,I2C master 0 I/O request" "Not requested,Requested"
|
|
rgroup.long 0x54++0x03
|
|
line.long 0x00 "IOMAN_I2CM0_ACK,I2C Master 0 I/O Acknowledge"
|
|
bitfld.long 0x00 4. " MAPPING_ACK ,I2C master 0 I/O acknowledge" "Disabled,Enabled"
|
|
group.long 0x58++0x03
|
|
line.long 0x00 "IOMAN_I2CM1_REQ,I2C Master 1 I/O Request"
|
|
bitfld.long 0x00 4. " MAPPING_REQ ,I2C master 1 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 0.--1. " IO_SEL ,I2C master 1 I/O Mapping Select" "A,B,C,?..."
|
|
rgroup.long 0x5C++0x03
|
|
line.long 0x00 "IOMAN_I2CM1_ACK,I2C Master 1 I/O Acknowledge"
|
|
bitfld.long 0x00 4. " MAPPING_ACK ,I2C master 1 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--1. " IO_SEL ,I2C master 1 I/O mapping acknowledge" "A,B,C,?..."
|
|
group.long 0x60++0x03
|
|
line.long 0x00 "IOMAN_I2CM2_REQ,I2C Master 2 I/O Request"
|
|
bitfld.long 0x00 4. " MAPPING_REQ ,I2C master 2 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 0.--1. " IO_SEL ,I2C master 2 I/O mapping select" "A,B,C,?..."
|
|
rgroup.long 0x64++0x03
|
|
line.long 0x00 "IOMAN_I2CM2_ACK,I2C Master 2 I/O Acknowledge"
|
|
bitfld.long 0x00 4. " MAPPING_ACK ,I2C master 2 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--1. " IO_SEL ,I2C master 2 I/O mapping acknowledge" "A,B,C,?..."
|
|
group.long 0x68++0x03
|
|
line.long 0x00 "IOMAN_I2CS_REQ,I2C Slave I/O Request"
|
|
bitfld.long 0x00 4. " MAPPING_REQ ,I2C slave I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 0.--2. " IO_SEL ,I2C slave I/O mapping select" "A,B,C,D,E,F,G,?..."
|
|
rgroup.long 0x6C++0x03
|
|
line.long 0x00 "IOMAN_I2CS_ACK,I2C Slave I/O Acknowledge"
|
|
bitfld.long 0x00 4. " MAPPING_ACK ,I2C slave I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--2. " IO_SEL ,I2C slave I/O mapping acknowledge" "A,B,C,D,E,F,G,?..."
|
|
group.long 0x70++0x03
|
|
line.long 0x00 "IOMAN_SPIM0_REQ,SPI Master 0 I/O Mode Request"
|
|
bitfld.long 0x00 24. " FAST_MODE ,SPI master 0 Fast mode request" "Not requested,Requested"
|
|
bitfld.long 0x00 20. " QUAD_IO_REQ ,SPI master 0 quad I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 12. " SS4_IO_REQ ,SPI master 0 SS.4 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 11. " SS3_IO_REQ ,SPI master 0 SS.3 I/O request" "Not requested,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 10. " SS2_IO_REQ ,SPI master 0 SS.2 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 9. " SS1_IO_REQ ,SPI master 0 SS.1 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 8. " SS0_IO_REQ ,SPI master 0 SS.0 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 4. " CORE_IO_REQ ,SPI master 0 Core I/O request" "Not requested,Requested"
|
|
rgroup.long 0x74++0x03
|
|
line.long 0x00 "IOMAN_SPIM0_ACK,SPI Master 0 I/O Mode Acknowledge"
|
|
bitfld.long 0x00 24. " FAST_MODE ,SPI master 0 fast mode acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " QUAD_IO_ACK ,SPI master 0 quad I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " SS4_IO_ACK ,SPI master 0 SS.4 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 11. " SS3_IO_ACK ,SPI master 0 SS.3 I/O acknowledge" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 10. " SS2_IO_ACK ,SPI master 0 SS.2 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " SS1_IO_ACK ,SPI master 0 SS.1 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " SS0_IO_ACK ,SPI master 0 SS.0 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CORE_IO_ACK ,SPI master 0 Core I/O acknowledge" "Disabled,Enabled"
|
|
group.long 0x78++0x03
|
|
line.long 0x00 "IOMAN_SPIM1_REQ,SPI Master 1 I/O Mode Request"
|
|
bitfld.long 0x00 24. " FAST_MODE ,SPI master 1 fast mode request" "Not requested,Requested"
|
|
bitfld.long 0x00 20. " QUAD_IO_REQ ,SPI master 1 Quad I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 10. " SS2_IO_REQ ,SPI master 1 SS.2 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 9. " SS1_IO_REQ ,SPI master 1 SS.1 I/O request" "Not requested,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 8. " SS0_IO_REQ ,SPI master 1 SS.0 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 4. " CORE_IO_REQ ,SPI master 1 core I/O request" "Not requested,Requested"
|
|
rgroup.long 0x7C++0x03
|
|
line.long 0x00 "IOMAN_SPIM0_ACK,SPI Master 1 I/O Mode Acknowledge"
|
|
bitfld.long 0x00 24. " FAST_MODE ,SPI master 1 fast mode acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " QUAD_IO_ACK ,SPI master 1 quad I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " SS2_IO_ACK ,SPI master 1 SS.2 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " SS1_IO_ACK ,SPI master 1 SS.1 I/O acknowledge" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 8. " SS0_IO_ACK ,SPI master 1 SS.0 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CORE_IO_ACK ,SPI master 1 Core I/O acknowledge" "Disabled,Enabled"
|
|
group.long 0x80++0x03
|
|
line.long 0x00 "IOMAN_SPIM2_REQ,SPI Master 2 I/O Mode Request"
|
|
bitfld.long 0x00 24. " FAST_MODE ,SPI master 2 fast mode request" "Not requested,Requested"
|
|
bitfld.long 0x00 20. " QUAD_IO_REQ ,SPI master 2 quad I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 17. " SR1_IO_REQ ,SPI master 2 SR.1 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 16. " SR0_IO_REQ ,SPI master 2 SR.0 I/O request" "Not requested,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 10. " SS2_IO_REQ ,SPI master 2 SS.2 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 9. " SS1_IO_REQ ,SPI master 2 SS.1 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 8. " SS0_IO_REQ ,SPI master 2 SS.0 I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 4. " CORE_IO_REQ ,SPI master 2 Core I/O request" "Not requested,Requested"
|
|
textline " "
|
|
bitfld.long 0x00 0.--1. " MAPPING_REQ ,SPI master 2 I/O mapping select" "A,B,C,"
|
|
rgroup.long 0x84++0x0B
|
|
line.long 0x00 "IOMAN_SPIM2_ACK,SPI Master 2 I/O Mode Acknowledge"
|
|
bitfld.long 0x00 24. " FAST_MODE ,SPI master 2 fast mode acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " QUAD_IO_ACK ,SPI master 2 quad I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " SR1_IO_REQ ,SPI master 2 SR.1 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " SR0_IO_REQ ,SPI master 2 SR.0 I/O acknowledge" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 10. " SS2_IO_ACK ,SPI master 2 SS.2 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " SS1_IO_ACK ,SPI master 2 SS.1 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " SS0_IO_ACK ,SPI master 2 SS.0 I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CORE_IO_ACK ,SPI master 2 Core I/O acknowledge" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--1. " MAPPING_ACK ,SPI master 2 I/O mapping acknowledge" "A,B,C,"
|
|
line.long 0x04 "IOMAN_SPIB_REQ,SPI Bridge I/O Mode Request"
|
|
bitfld.long 0x04 12. " FAST_MODE ,SPI bridge fast mode request" "Not requested,Requested"
|
|
bitfld.long 0x04 8. " QUAD_IO_REQ ,SPI bridge quad I/O request" "Not requested,Requested"
|
|
bitfld.long 0x04 4. " CORE_IO_REQ ,SPI bridge core I/O request" "Not requested,Requested"
|
|
line.long 0x08 "IOMAN_SPIB_ACK,SPI Bridge I/O Mode Acknowledge"
|
|
bitfld.long 0x08 12. " FAST_MODE ,SPI bridge fast mode acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x08 8. " QUAD_IO_ACK ,SPI bridge quad I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x08 4. " CORE_IO_ACK ,SPI bridge core I/O acknowledge" "Disabled,Enabled"
|
|
group.long 0x90++0x0B
|
|
line.long 0x00 "IOMAN_OWM_REQ,1-Wire Master I/O Mode Request"
|
|
bitfld.long 0x00 5. " EPU_IO_REQ ,External pullup control line I/O request" "Not requested,Requested"
|
|
bitfld.long 0x00 4. " MAPPING_REQ ,1-Wire line I/O request" "Not requested,Requested"
|
|
line.long 0x04 "IOMAN_OWM_ACK,1-Wire Master I/O Mode Acknowledge"
|
|
bitfld.long 0x04 5. " EPU_IO_ACK ,External pullup control line I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " MAPPING_ACK ,1-Wire line I/O acknowledge" "Disabled,Enabled"
|
|
line.long 0x08 "IOMAN_SPIS_REQ,SPI Slave I/O Mode Request"
|
|
bitfld.long 0x08 12. " FAST_MODE ,SPI slave fast mode request" "Not requested,Requested"
|
|
bitfld.long 0x08 8. " QUAD_IO_REQ ,SPI slave quad I/O request" "Not requested,Requested"
|
|
bitfld.long 0x08 4. " CORE_IO_REQ ,SPI slave core I/O request" "Not requested,Requested"
|
|
bitfld.long 0x08 0.--1. " MAPPING_REQ ,SPI slave I/O mapping select" "A,B,C,"
|
|
rgroup.long 0x9C++0x0B
|
|
line.long 0x00 "IOMAN_SPIS_ACK,SPI Slave I/O Mode Acknowledge"
|
|
bitfld.long 0x00 12. " FAST_MODE ,SPI slave fast mode acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " QUAD_IO_ACK ,SPI slave quad I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " CORE_IO_ACK ,SPI slave core I/O acknowledge" "Disabled,Enabled"
|
|
bitfld.long 0x00 0.--1. " MAPPING_ACK ,SPI slave I/O mapping acknowledge" "A,B,C,"
|
|
group.long 0x100++0x0B
|
|
line.long 0x00 "IOMAN_USE_VDDIOH_0,Enable VDDIOH Register 0"
|
|
bitfld.long 0x00 31. " P37 ,Enable VDDIOH register 0 for P3.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 30. " P36 ,Enable VDDIOH register 0 for P3.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 29. " P35 ,Enable VDDIOH register 0 for P3.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 28. " P34 ,Enable VDDIOH register 0 for P3.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 27. " P33 ,Enable VDDIOH register 0 for P3.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 26. " P32 ,Enable VDDIOH register 0 for P3.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 25. " P31 ,Enable VDDIOH register 0 for P3.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 24. " P30 ,Enable VDDIOH register 0 for P3.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 23. " P27 ,Enable VDDIOH register 0 for P2.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " P26 ,Enable VDDIOH register 0 for P2.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 21. " P25 ,Enable VDDIOH register 0 for P2.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 20. " P24 ,Enable VDDIOH register 0 for P2.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 19. " P23 ,Enable VDDIOH register 0 for P2.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 18. " P22 ,Enable VDDIOH register 0 for P2.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " P21 ,Enable VDDIOH register 0 for P2.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " P20 ,Enable VDDIOH register 0 for P2.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " P17 ,Enable VDDIOH register 0 for P1.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " P16 ,Enable VDDIOH register 0 for P1.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " P15 ,Enable VDDIOH register 0 for P1.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " P14 ,Enable VDDIOH register 0 for P1.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11. " P13 ,Enable VDDIOH register 0 for P1.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " P12 ,Enable VDDIOH register 0 for P1.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " P11 ,Enable VDDIOH register 0 for P1.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " P10 ,Enable VDDIOH register 0 for P1.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " P07 ,Enable VDDIOH register 0 for P0.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " P06 ,Enable VDDIOH register 0 for P0.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " P05 ,Enable VDDIOH register 0 for P0.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " P04 ,Enable VDDIOH register 0 for P0.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " P03 ,Enable VDDIOH register 0 for P0.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " P02 ,Enable VDDIOH register 0 for P0.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " P01 ,Enable VDDIOH register 0 for P0.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " P00 ,Enable VDDIOH register 0 for P0.0" "Disabled,Enabled"
|
|
line.long 0x04 "IOMAN_USE_VDDIOH_1,Enable VDDIOH Register 1"
|
|
bitfld.long 0x04 31. " P77 ,Enable VDDIOH register 1 for P7.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 30. " P76 ,Enable VDDIOH register 1 for P7.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 29. " P75 ,Enable VDDIOH register 1 for P7.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 28. " P74 ,Enable VDDIOH register 1 for P7.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 27. " P73 ,Enable VDDIOH register 1 for P7.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 26. " P72 ,Enable VDDIOH register 1 for P7.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 25. " P71 ,Enable VDDIOH register 1 for P7.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 24. " P70 ,Enable VDDIOH register 1 for P7.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 23. " P67 ,Enable VDDIOH register 1 for P6.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 22. " P66 ,Enable VDDIOH register 1 for P6.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 21. " P65 ,Enable VDDIOH register 1 for P6.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 20. " P64 ,Enable VDDIOH register 1 for P6.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 19. " P63 ,Enable VDDIOH register 1 for P6.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 18. " P62 ,Enable VDDIOH register 1 for P6.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 17. " P61 ,Enable VDDIOH register 1 for P6.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 16. " P60 ,Enable VDDIOH register 1 for P6.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 15. " P57 ,Enable VDDIOH register 1 for P5.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 14. " P56 ,Enable VDDIOH register 1 for P5.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 13. " P55 ,Enable VDDIOH register 1 for P5.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 12. " P54 ,Enable VDDIOH register 1 for P5.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 11. " P53 ,Enable VDDIOH register 1 for P5.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 10. " P52 ,Enable VDDIOH register 1 for P5.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 9. " P51 ,Enable VDDIOH register 1 for P5.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 8. " P50 ,Enable VDDIOH register 1 for P5.0" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 7. " P47 ,Enable VDDIOH register 1 for P4.7" "Disabled,Enabled"
|
|
bitfld.long 0x04 6. " P46 ,Enable VDDIOH register 1 for P4.6" "Disabled,Enabled"
|
|
bitfld.long 0x04 5. " P45 ,Enable VDDIOH register 1 for P4.5" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " P44 ,Enable VDDIOH register 1 for P4.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 3. " P43 ,Enable VDDIOH register 1 for P4.3" "Disabled,Enabled"
|
|
bitfld.long 0x04 2. " P42 ,Enable VDDIOH register 1 for P4.2" "Disabled,Enabled"
|
|
bitfld.long 0x04 1. " P41 ,Enable VDDIOH register 1 for P4.1" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " P40 ,Enable VDDIOH register 1 for P4.0" "Disabled,Enabled"
|
|
line.long 0x08 "IOMAN_USE_VDDIOH_2,Enable VDDIOH Register 2"
|
|
bitfld.long 0x08 1. " P81 ,Enable VDDIOH register 2 for P8.1" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " P80 ,Enable VDDIOH register 2 for P8.0" "Disabled,Enabled"
|
|
group.long 0x110++0x03
|
|
line.long 0x00 "IOMAN_PAD_MODE,Pad Mode Control Register"
|
|
bitfld.long 0x00 1. " ALT_RCVR_MODE ,Enable new alternate receiver mode" "No effect,Enabled"
|
|
bitfld.long 0x00 0. " SLOW_MODE ,Enable new slow mode" "No effect,Enabled"
|
|
group.long 0x180++0x03
|
|
line.long 0x00 "IOMAN_WUD_REQ2,Wakeup Detect Mode Request Register 2"
|
|
bitfld.long 0x00 1. " WUD_REQ_P8 ,Wakeup detect request mode: P8.1" "No effect,Requested"
|
|
bitfld.long 0x00 0. " WUD_REQ_P8 ,Wakeup detect request mode: P8.0" "No effect,Requested"
|
|
rgroup.long 0x188++0x03
|
|
line.long 0x00 "IOMAN_WUD_ACK2,Wakeup Detect Mode Acknowledge Register 2"
|
|
bitfld.long 0x00 1. " WUD_ACK_P8 ,WUD mode acknowledge P8.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " WUD_ACK_P8 ,WUD mode acknowledge P8.0" "Disabled,Enabled"
|
|
group.long 0x190++0x03
|
|
line.long 0x00 "IOMAN_ALI_REQ2,Analog Input Request Register 2"
|
|
bitfld.long 0x00 1. " ALI_REQ_P8 ,Analog input mode request: P8.1" "No effect,Requested"
|
|
bitfld.long 0x00 0. " ALI_REQ_P8 ,Analog input mode request: P8.0" "No effect,Requested"
|
|
rgroup.long 0x198++0x03
|
|
line.long 0x00 "IOMAN_ALI_ACK2,Analog Input Acknowledge Register 2"
|
|
bitfld.long 0x00 7. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.7" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.6" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.5" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.3" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.2" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.1" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " ALI_ACK_P7 ,Analog in mode acknowledge: P7.0" "Disabled,Enabled"
|
|
group.long 0x1A0++0x03
|
|
line.long 0x00 "IOMAN_ALI_CONNECT2,Analog I/O Connection Control Register 2"
|
|
bitfld.long 0x00 1. " BIT1 ,Analog I/O connection control register 2" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " BIT0 ,Analog I/O connection control register 2" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "PMU (Peripheral Management Unit)"
|
|
base ad:0x40005000
|
|
width 13.
|
|
group.long 0x00++0x0B "Channel 0"
|
|
line.long 0x00 "PMU0_DSCADR,PMU Channel Next Descriptor Address"
|
|
line.long 0x04 "PMU0_CFG,Channel Configuration"
|
|
bitfld.long 0x04 24.--28. " BURST_SIZE ,AHB maximum burst size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x04 17. " INT_EN ,PMU channel interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 16. " INTERRUPT ,Descriptor interrupt flag (execution of a descriptor)" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 14.--15. " PS_SEL ,Time Out Interval Prescale Select (Divider)" "Disabled,/256,/65536 (2^16),/16777216 (2^24)"
|
|
textline " "
|
|
bitfld.long 0x04 11.--13. " TO_SEL ,Time out interval select (multiplier)" "x4,x8,x16,x32,x64,x128,x256,x512"
|
|
eventfld.long 0x04 6. " TO_STAT ,AHB bus timeout flag" "No timeout,Timeout"
|
|
eventfld.long 0x04 4. " BUS_ERROR ,AHB bus error flag" "No error,Error"
|
|
bitfld.long 0x04 3. " MANUAL ,Manual mode enable (Test only)" "Disabled,Enabled"
|
|
textline " "
|
|
eventfld.long 0x04 2. " LL_STOPPED ,PMU channel stopped flag" "Not stopped,Stopped"
|
|
bitfld.long 0x04 0. " ENABLE ,PMU channel enable" "Disabled,Enabled"
|
|
line.long 0x08 "PMU0_LOOP,Channel Loop Counters"
|
|
hexmask.long.word 0x08 16.--31. 1. " COUNTER_1 ,PMU channel loop counter 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " COUNTER_0 ,PMU channel loop counter 0"
|
|
group.long 0x00++0x0B "Channel 1"
|
|
line.long 0x00 "PMU1_DSCADR,PMU Channel Next Descriptor Address"
|
|
line.long 0x04 "PMU1_CFG,Channel Configuration"
|
|
bitfld.long 0x04 24.--28. " BURST_SIZE ,AHB maximum burst size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x04 17. " INT_EN ,PMU channel interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 16. " INTERRUPT ,Descriptor interrupt flag (execution of a descriptor)" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 14.--15. " PS_SEL ,Time Out Interval Prescale Select (Divider)" "Disabled,/256,/65536 (2^16),/16777216 (2^24)"
|
|
textline " "
|
|
bitfld.long 0x04 11.--13. " TO_SEL ,Time out interval select (multiplier)" "x4,x8,x16,x32,x64,x128,x256,x512"
|
|
eventfld.long 0x04 6. " TO_STAT ,AHB bus timeout flag" "No timeout,Timeout"
|
|
eventfld.long 0x04 4. " BUS_ERROR ,AHB bus error flag" "No error,Error"
|
|
bitfld.long 0x04 3. " MANUAL ,Manual mode enable (Test only)" "Disabled,Enabled"
|
|
textline " "
|
|
eventfld.long 0x04 2. " LL_STOPPED ,PMU channel stopped flag" "Not stopped,Stopped"
|
|
bitfld.long 0x04 0. " ENABLE ,PMU channel enable" "Disabled,Enabled"
|
|
line.long 0x08 "PMU1_LOOP,Channel Loop Counters"
|
|
hexmask.long.word 0x08 16.--31. 1. " COUNTER_1 ,PMU channel loop counter 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " COUNTER_0 ,PMU channel loop counter 0"
|
|
group.long 0x00++0x0B "Channel 2"
|
|
line.long 0x00 "PMU2_DSCADR,PMU Channel Next Descriptor Address"
|
|
line.long 0x04 "PMU2_CFG,Channel Configuration"
|
|
bitfld.long 0x04 24.--28. " BURST_SIZE ,AHB maximum burst size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x04 17. " INT_EN ,PMU channel interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 16. " INTERRUPT ,Descriptor interrupt flag (execution of a descriptor)" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 14.--15. " PS_SEL ,Time Out Interval Prescale Select (Divider)" "Disabled,/256,/65536 (2^16),/16777216 (2^24)"
|
|
textline " "
|
|
bitfld.long 0x04 11.--13. " TO_SEL ,Time out interval select (multiplier)" "x4,x8,x16,x32,x64,x128,x256,x512"
|
|
eventfld.long 0x04 6. " TO_STAT ,AHB bus timeout flag" "No timeout,Timeout"
|
|
eventfld.long 0x04 4. " BUS_ERROR ,AHB bus error flag" "No error,Error"
|
|
bitfld.long 0x04 3. " MANUAL ,Manual mode enable (Test only)" "Disabled,Enabled"
|
|
textline " "
|
|
eventfld.long 0x04 2. " LL_STOPPED ,PMU channel stopped flag" "Not stopped,Stopped"
|
|
bitfld.long 0x04 0. " ENABLE ,PMU channel enable" "Disabled,Enabled"
|
|
line.long 0x08 "PMU2_LOOP,Channel Loop Counters"
|
|
hexmask.long.word 0x08 16.--31. 1. " COUNTER_1 ,PMU channel loop counter 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " COUNTER_0 ,PMU channel loop counter 0"
|
|
group.long 0x00++0x0B "Channel 3"
|
|
line.long 0x00 "PMU3_DSCADR,PMU Channel Next Descriptor Address"
|
|
line.long 0x04 "PMU3_CFG,Channel Configuration"
|
|
bitfld.long 0x04 24.--28. " BURST_SIZE ,AHB maximum burst size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x04 17. " INT_EN ,PMU channel interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 16. " INTERRUPT ,Descriptor interrupt flag (execution of a descriptor)" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 14.--15. " PS_SEL ,Time Out Interval Prescale Select (Divider)" "Disabled,/256,/65536 (2^16),/16777216 (2^24)"
|
|
textline " "
|
|
bitfld.long 0x04 11.--13. " TO_SEL ,Time out interval select (multiplier)" "x4,x8,x16,x32,x64,x128,x256,x512"
|
|
eventfld.long 0x04 6. " TO_STAT ,AHB bus timeout flag" "No timeout,Timeout"
|
|
eventfld.long 0x04 4. " BUS_ERROR ,AHB bus error flag" "No error,Error"
|
|
bitfld.long 0x04 3. " MANUAL ,Manual mode enable (Test only)" "Disabled,Enabled"
|
|
textline " "
|
|
eventfld.long 0x04 2. " LL_STOPPED ,PMU channel stopped flag" "Not stopped,Stopped"
|
|
bitfld.long 0x04 0. " ENABLE ,PMU channel enable" "Disabled,Enabled"
|
|
line.long 0x08 "PMU3_LOOP,Channel Loop Counters"
|
|
hexmask.long.word 0x08 16.--31. 1. " COUNTER_1 ,PMU channel loop counter 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " COUNTER_0 ,PMU channel loop counter 0"
|
|
group.long 0x00++0x0B "Channel 4"
|
|
line.long 0x00 "PMU4_DSCADR,PMU Channel Next Descriptor Address"
|
|
line.long 0x04 "PMU4_CFG,Channel Configuration"
|
|
bitfld.long 0x04 24.--28. " BURST_SIZE ,AHB maximum burst size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x04 17. " INT_EN ,PMU channel interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 16. " INTERRUPT ,Descriptor interrupt flag (execution of a descriptor)" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 14.--15. " PS_SEL ,Time Out Interval Prescale Select (Divider)" "Disabled,/256,/65536 (2^16),/16777216 (2^24)"
|
|
textline " "
|
|
bitfld.long 0x04 11.--13. " TO_SEL ,Time out interval select (multiplier)" "x4,x8,x16,x32,x64,x128,x256,x512"
|
|
eventfld.long 0x04 6. " TO_STAT ,AHB bus timeout flag" "No timeout,Timeout"
|
|
eventfld.long 0x04 4. " BUS_ERROR ,AHB bus error flag" "No error,Error"
|
|
bitfld.long 0x04 3. " MANUAL ,Manual mode enable (Test only)" "Disabled,Enabled"
|
|
textline " "
|
|
eventfld.long 0x04 2. " LL_STOPPED ,PMU channel stopped flag" "Not stopped,Stopped"
|
|
bitfld.long 0x04 0. " ENABLE ,PMU channel enable" "Disabled,Enabled"
|
|
line.long 0x08 "PMU4_LOOP,Channel Loop Counters"
|
|
hexmask.long.word 0x08 16.--31. 1. " COUNTER_1 ,PMU channel loop counter 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " COUNTER_0 ,PMU channel loop counter 0"
|
|
group.long 0x00++0x0B "Channel 5"
|
|
line.long 0x00 "PMU5_DSCADR,PMU Channel Next Descriptor Address"
|
|
line.long 0x04 "PMU5_CFG,Channel Configuration"
|
|
bitfld.long 0x04 24.--28. " BURST_SIZE ,AHB maximum burst size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
bitfld.long 0x04 17. " INT_EN ,PMU channel interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 16. " INTERRUPT ,Descriptor interrupt flag (execution of a descriptor)" "No interrupt,Interrupt"
|
|
bitfld.long 0x04 14.--15. " PS_SEL ,Time Out Interval Prescale Select (Divider)" "Disabled,/256,/65536 (2^16),/16777216 (2^24)"
|
|
textline " "
|
|
bitfld.long 0x04 11.--13. " TO_SEL ,Time out interval select (multiplier)" "x4,x8,x16,x32,x64,x128,x256,x512"
|
|
eventfld.long 0x04 6. " TO_STAT ,AHB bus timeout flag" "No timeout,Timeout"
|
|
eventfld.long 0x04 4. " BUS_ERROR ,AHB bus error flag" "No error,Error"
|
|
bitfld.long 0x04 3. " MANUAL ,Manual mode enable (Test only)" "Disabled,Enabled"
|
|
textline " "
|
|
eventfld.long 0x04 2. " LL_STOPPED ,PMU channel stopped flag" "Not stopped,Stopped"
|
|
bitfld.long 0x04 0. " ENABLE ,PMU channel enable" "Disabled,Enabled"
|
|
line.long 0x08 "PMU5_LOOP,Channel Loop Counters"
|
|
hexmask.long.word 0x08 16.--31. 1. " COUNTER_1 ,PMU channel loop counter 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " COUNTER_0 ,PMU channel loop counter 0"
|
|
width 0x0B
|
|
tree.end
|
|
tree "OWM (1-Wire Master)"
|
|
base ad:0x4001E000
|
|
width 17.
|
|
group.long 0x00++0x0B
|
|
line.long 0x00 "OWM_CFG,1-Wire Master Configuration"
|
|
bitfld.long 0x00 7. " INT_PULLUP_ENABLE ,Enable internal pullup" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " OVERDRIVE ,Enable override speed for 1-Wire operations" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " SINGLE_BIT_MODE ,Enable single bit TX/RX mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EXT_PULLUP_ENABLE ,Enable external FET pullup" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " EXT_PULLUP_MODE ,Provide an extra output to control an external pullup" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " BIT_BANG_EN ,Bit bang enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " FORCE_PRES_DET ,Force line during presence detect" "Not forced,Forced"
|
|
bitfld.long 0x00 0. " LONG_LINE_MODE ,Long Line Mode" "Disabled,Enabled"
|
|
line.long 0x04 "OWM_CLK_DIV_1US,1-Wire Master Clock Divisor"
|
|
hexmask.long.byte 0x04 0.--7. 1. " DIVISOR ,Clock divisor for 1MHz"
|
|
line.long 0x08 "OWM_CTRL_STAT,1-Wire Master Control/Status"
|
|
rbitfld.long 0x08 7. " PRESENCE_DETECT ,Presence pulse detected" "Not detected,Detected"
|
|
bitfld.long 0x08 5. " EXT_PULLUP_POL ,External FET pullup polarity" "High,Low"
|
|
bitfld.long 0x08 4. " OD_SPEC_MODE ,Enable overdrive spec timing mode" "12us basis,10us basis"
|
|
rbitfld.long 0x08 3. " OW_INPUT ,OW input state" "0,1"
|
|
textline " "
|
|
bitfld.long 0x08 2. " BIT_BANG_OE ,Bit bang output enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 1. " SRA_MODE ,SRA mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " START_OW_RESET ,Start OW reset" "No reset,Reset"
|
|
hgroup.long 0x0C++0x03
|
|
hide.long 0x00 "OWM_DATA,1-1-Wire Master Data Buffer"
|
|
in
|
|
group.long 0x10++0x07
|
|
line.long 0x00 "OWM_INTFL,1-Wire Master Interrupt Flag"
|
|
eventfld.long 0x00 4. " LINE_LOW ,OW line low detected interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x00 3. " LINE_SHORT ,OW line short detected interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x00 2. " RX_DATA_READY ,Rx data ready interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x00 1. " TX_DATA_EMPTY ,Tx data empty interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x00 0. " OW_RESET_DONE ,OW reset sequence completed" "Not completed,Completed"
|
|
line.long 0x04 "OWM_INTEN,1-Wire Master Interrupt Enable"
|
|
eventfld.long 0x04 4. " LINE_LOW ,OW line low detected interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 3. " LINE_SHORT ,OW line short detected interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 2. " RX_DATA_READY ,Rx data ready interrupt enable" "Disabled,Enabled"
|
|
eventfld.long 0x04 1. " TX_DATA_EMPTY ,Tx data empty interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
eventfld.long 0x04 0. " OW_RESET_DONE ,OW reset sequence completed" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "I2CM (I2C Master)"
|
|
tree "Master 0"
|
|
base ad:0x40016000
|
|
width 18.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "I2CM0_FS_CLK_DIV,Full Speed SCL Clock Settings"
|
|
hexmask.long.word 0x00 20.--31. 1. " FS_SCL_HI_CNT ,Full speed SCL high count"
|
|
hexmask.long.word 0x00 8.--19. 1. " FS_SCL_LO_CNT ,Full speed SCL low count"
|
|
hexmask.long.byte 0x00 0.--7. 1. " FS_FILTER_CLK_DIV ,Full speed filter clock divisor"
|
|
group.long 0x0C++0x13
|
|
line.long 0x00 "I2CM0_TIMEOUT,Timeout and Auto-Stop Settings"
|
|
bitfld.long 0x00 24. " AUTO_STOP_EN ,Auto-Stop Enable" "Disabled,Enabled"
|
|
hexmask.long.byte 0x00 16.--23. 1. " TX_TIMEOUT ,Transaction timeout limit"
|
|
line.long 0x04 "I2CM0_CTRL,I2C Master Control Register"
|
|
bitfld.long 0x04 7. " MSTR_RESET_EN ,Master reset" "No reset,Reset"
|
|
bitfld.long 0x04 3. " RX_FIFO_EN ,Master results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 2. " TX_FIFO_EN ,Master transaction FIFO enable" "Disabled,Enabled"
|
|
line.long 0x08 "I2CM0_TRANS,I2C Master Transaction Start and Status Flags"
|
|
rbitfld.long 0x08 5. " TX_TIMEOUT ,Transaction timed out" "Not timed out,Timed out"
|
|
rbitfld.long 0x08 4. " TX_LOST_ARBITR ,Transaction lost arbitration" "No,Yes"
|
|
rbitfld.long 0x08 3. " TX_NACKED ,Transaction NACKed" "No,Yes"
|
|
textline " "
|
|
rbitfld.long 0x08 2. " TX_DONE ,Transaction done" "Not completed,Completed"
|
|
rbitfld.long 0x08 1. " TX_IN_PROGRESS ,Transaction in progress" "No,Yes"
|
|
bitfld.long 0x08 0. " TX_START ,Start transaction" "Not started,Started"
|
|
line.long 0x0C "I2CM0_INTFL,Interrupt Flags"
|
|
eventfld.long 0x0C 9. " RX_FIFO_FULL ,Results FIFO full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 8. " RX_FIFO_3Q_FULL ,Results FIFO 3Q full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 7. " RX_FIFO_2Q_FULL ,Results FIFO 2Q full int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 6. " RX_FIFO_NOT_EMPTY ,Results FIFO not empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 5. " TX_FIFO_3Q_EMPTY ,Transaction FIFO 3Q empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 4. " TX_FIFO_EMPTY ,Transaction FIFO empty int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 3. " TX_TIMEOUT ,Transaction timed out int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 2. " TX_LOST_ARBITR ,Transaction lost arbitration timed int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 1. " TX_NACKED ,Transaction NACKed int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 0. " TX_DONE ,Transaction done int status" "No interrupt,Interrupt"
|
|
line.long 0x10 "I2CM0_INTEN,Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x10 9. " RX_FIFO_FULL ,Result FIFO full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 8. " RX_FIFO_3Q_FULL ,Result FIFO 3Q full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 7. " RX_FIFO_2Q_FULL ,Result FIFO 2Q full int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 6. " RX_FIFO_NOT_EMPTY ,Result FIFO not empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 5. " TX_FIFO_3Q_EMPTY ,Transaction FIFO 3Q empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 4. " TX_FIFO_EMPTY ,Transaction FIFO empty int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 3. " TX_TIMEOUT ,Transaction timed out int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 2. " TX_LOST_ARBITR ,Transaction lost arbitration int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 1. " TX_NACKED ,Transaction NACKed int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 0. " TX_DONE ,Transaction done int enable" "Disabled,Enabled"
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "I2CM0_BB,Bit-Bang Control Register"
|
|
rbitfld.long 0x00 16.--20. " RX_FIFO_CNT ,Results FIFO data received count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x00 3. " BB_SDA_IN_VAL ,Bit bang SDA input value" "0,1"
|
|
rbitfld.long 0x00 2. " BB_SCL_IN_VAL ,Bit bang SCL input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 1. " BB_SDA_OUT ,Bit bang SDA output" "0,1"
|
|
bitfld.long 0x00 0. " BB_SCL_OUT ,Bit bang SCL output" "0,1"
|
|
hgroup.long 0xF1000++0x03
|
|
hide.long 0x00 "I2CM0_FIFO_TRANS,I2C Master 0 Transaction FIFO"
|
|
in
|
|
hgroup.long 0xF1800++0x03
|
|
hide.long 0x00 "I2CM0_FIFO_RSLTS,I2C Master 0 Results FIFO"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree "Master 1"
|
|
base ad:0x40017000
|
|
width 18.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "I2CM1_FS_CLK_DIV,Full Speed SCL Clock Settings"
|
|
hexmask.long.word 0x00 20.--31. 1. " FS_SCL_HI_CNT ,Full speed SCL high count"
|
|
hexmask.long.word 0x00 8.--19. 1. " FS_SCL_LO_CNT ,Full speed SCL low count"
|
|
hexmask.long.byte 0x00 0.--7. 1. " FS_FILTER_CLK_DIV ,Full speed filter clock divisor"
|
|
group.long 0x0C++0x13
|
|
line.long 0x00 "I2CM1_TIMEOUT,Timeout and Auto-Stop Settings"
|
|
bitfld.long 0x00 24. " AUTO_STOP_EN ,Auto-Stop Enable" "Disabled,Enabled"
|
|
hexmask.long.byte 0x00 16.--23. 1. " TX_TIMEOUT ,Transaction timeout limit"
|
|
line.long 0x04 "I2CM1_CTRL,I2C Master Control Register"
|
|
bitfld.long 0x04 7. " MSTR_RESET_EN ,Master reset" "No reset,Reset"
|
|
bitfld.long 0x04 3. " RX_FIFO_EN ,Master results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 2. " TX_FIFO_EN ,Master transaction FIFO enable" "Disabled,Enabled"
|
|
line.long 0x08 "I2CM1_TRANS,I2C Master Transaction Start and Status Flags"
|
|
rbitfld.long 0x08 5. " TX_TIMEOUT ,Transaction timed out" "Not timed out,Timed out"
|
|
rbitfld.long 0x08 4. " TX_LOST_ARBITR ,Transaction lost arbitration" "No,Yes"
|
|
rbitfld.long 0x08 3. " TX_NACKED ,Transaction NACKed" "No,Yes"
|
|
textline " "
|
|
rbitfld.long 0x08 2. " TX_DONE ,Transaction done" "Not completed,Completed"
|
|
rbitfld.long 0x08 1. " TX_IN_PROGRESS ,Transaction in progress" "No,Yes"
|
|
bitfld.long 0x08 0. " TX_START ,Start transaction" "Not started,Started"
|
|
line.long 0x0C "I2CM1_INTFL,Interrupt Flags"
|
|
eventfld.long 0x0C 9. " RX_FIFO_FULL ,Results FIFO full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 8. " RX_FIFO_3Q_FULL ,Results FIFO 3Q full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 7. " RX_FIFO_2Q_FULL ,Results FIFO 2Q full int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 6. " RX_FIFO_NOT_EMPTY ,Results FIFO not empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 5. " TX_FIFO_3Q_EMPTY ,Transaction FIFO 3Q empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 4. " TX_FIFO_EMPTY ,Transaction FIFO empty int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 3. " TX_TIMEOUT ,Transaction timed out int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 2. " TX_LOST_ARBITR ,Transaction lost arbitration timed int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 1. " TX_NACKED ,Transaction NACKed int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 0. " TX_DONE ,Transaction done int status" "No interrupt,Interrupt"
|
|
line.long 0x10 "I2CM1_INTEN,Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x10 9. " RX_FIFO_FULL ,Result FIFO full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 8. " RX_FIFO_3Q_FULL ,Result FIFO 3Q full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 7. " RX_FIFO_2Q_FULL ,Result FIFO 2Q full int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 6. " RX_FIFO_NOT_EMPTY ,Result FIFO not empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 5. " TX_FIFO_3Q_EMPTY ,Transaction FIFO 3Q empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 4. " TX_FIFO_EMPTY ,Transaction FIFO empty int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 3. " TX_TIMEOUT ,Transaction timed out int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 2. " TX_LOST_ARBITR ,Transaction lost arbitration int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 1. " TX_NACKED ,Transaction NACKed int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 0. " TX_DONE ,Transaction done int enable" "Disabled,Enabled"
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "I2CM1_BB,Bit-Bang Control Register"
|
|
rbitfld.long 0x00 16.--20. " RX_FIFO_CNT ,Results FIFO data received count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x00 3. " BB_SDA_IN_VAL ,Bit bang SDA input value" "0,1"
|
|
rbitfld.long 0x00 2. " BB_SCL_IN_VAL ,Bit bang SCL input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 1. " BB_SDA_OUT ,Bit bang SDA output" "0,1"
|
|
bitfld.long 0x00 0. " BB_SCL_OUT ,Bit bang SCL output" "0,1"
|
|
hgroup.long 0xF1000++0x03
|
|
hide.long 0x00 "I2CM1_FIFO_TRANS,I2C Master 0 Transaction FIFO"
|
|
in
|
|
hgroup.long 0xF1800++0x03
|
|
hide.long 0x00 "I2CM1_FIFO_RSLTS,I2C Master 0 Results FIFO"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree "Master 2"
|
|
base ad:0x40018000
|
|
width 18.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "I2CM2_FS_CLK_DIV,Full Speed SCL Clock Settings"
|
|
hexmask.long.word 0x00 20.--31. 1. " FS_SCL_HI_CNT ,Full speed SCL high count"
|
|
hexmask.long.word 0x00 8.--19. 1. " FS_SCL_LO_CNT ,Full speed SCL low count"
|
|
hexmask.long.byte 0x00 0.--7. 1. " FS_FILTER_CLK_DIV ,Full speed filter clock divisor"
|
|
group.long 0x0C++0x13
|
|
line.long 0x00 "I2CM2_TIMEOUT,Timeout and Auto-Stop Settings"
|
|
bitfld.long 0x00 24. " AUTO_STOP_EN ,Auto-Stop Enable" "Disabled,Enabled"
|
|
hexmask.long.byte 0x00 16.--23. 1. " TX_TIMEOUT ,Transaction timeout limit"
|
|
line.long 0x04 "I2CM2_CTRL,I2C Master Control Register"
|
|
bitfld.long 0x04 7. " MSTR_RESET_EN ,Master reset" "No reset,Reset"
|
|
bitfld.long 0x04 3. " RX_FIFO_EN ,Master results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 2. " TX_FIFO_EN ,Master transaction FIFO enable" "Disabled,Enabled"
|
|
line.long 0x08 "I2CM2_TRANS,I2C Master Transaction Start and Status Flags"
|
|
rbitfld.long 0x08 5. " TX_TIMEOUT ,Transaction timed out" "Not timed out,Timed out"
|
|
rbitfld.long 0x08 4. " TX_LOST_ARBITR ,Transaction lost arbitration" "No,Yes"
|
|
rbitfld.long 0x08 3. " TX_NACKED ,Transaction NACKed" "No,Yes"
|
|
textline " "
|
|
rbitfld.long 0x08 2. " TX_DONE ,Transaction done" "Not completed,Completed"
|
|
rbitfld.long 0x08 1. " TX_IN_PROGRESS ,Transaction in progress" "No,Yes"
|
|
bitfld.long 0x08 0. " TX_START ,Start transaction" "Not started,Started"
|
|
line.long 0x0C "I2CM2_INTFL,Interrupt Flags"
|
|
eventfld.long 0x0C 9. " RX_FIFO_FULL ,Results FIFO full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 8. " RX_FIFO_3Q_FULL ,Results FIFO 3Q full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 7. " RX_FIFO_2Q_FULL ,Results FIFO 2Q full int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 6. " RX_FIFO_NOT_EMPTY ,Results FIFO not empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 5. " TX_FIFO_3Q_EMPTY ,Transaction FIFO 3Q empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 4. " TX_FIFO_EMPTY ,Transaction FIFO empty int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 3. " TX_TIMEOUT ,Transaction timed out int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 2. " TX_LOST_ARBITR ,Transaction lost arbitration timed int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x0C 1. " TX_NACKED ,Transaction NACKed int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x0C 0. " TX_DONE ,Transaction done int status" "No interrupt,Interrupt"
|
|
line.long 0x10 "I2CM2_INTEN,Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x10 9. " RX_FIFO_FULL ,Result FIFO full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 8. " RX_FIFO_3Q_FULL ,Result FIFO 3Q full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 7. " RX_FIFO_2Q_FULL ,Result FIFO 2Q full int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 6. " RX_FIFO_NOT_EMPTY ,Result FIFO not empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 5. " TX_FIFO_3Q_EMPTY ,Transaction FIFO 3Q empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 4. " TX_FIFO_EMPTY ,Transaction FIFO empty int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 3. " TX_TIMEOUT ,Transaction timed out int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 2. " TX_LOST_ARBITR ,Transaction lost arbitration int enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 1. " TX_NACKED ,Transaction NACKed int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x10 0. " TX_DONE ,Transaction done int enable" "Disabled,Enabled"
|
|
group.long 0x28++0x03
|
|
line.long 0x00 "I2CM2_BB,Bit-Bang Control Register"
|
|
rbitfld.long 0x00 16.--20. " RX_FIFO_CNT ,Results FIFO data received count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x00 3. " BB_SDA_IN_VAL ,Bit bang SDA input value" "0,1"
|
|
rbitfld.long 0x00 2. " BB_SCL_IN_VAL ,Bit bang SCL input value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 1. " BB_SDA_OUT ,Bit bang SDA output" "0,1"
|
|
bitfld.long 0x00 0. " BB_SCL_OUT ,Bit bang SCL output" "0,1"
|
|
hgroup.long 0xF1000++0x03
|
|
hide.long 0x00 "I2CM2_FIFO_TRANS,I2C Master 0 Transaction FIFO"
|
|
in
|
|
hgroup.long 0xF1800++0x03
|
|
hide.long 0x00 "I2CM2_FIFO_RSLTS,I2C Master 0 Results FIFO"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "I2CS (I2C Slave)"
|
|
base ad:0x40019000
|
|
width 16.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "I2CS_CLK_DIV,I2C Slave Clock Divisor Control"
|
|
hexmask.long.byte 0x00 0.--7. 1. " FS_FILTER_CLOCK_DIV ,FS filter clock divisor"
|
|
if (((per.l(ad:0x40019000+0x04))&0x1000)==0x1000)
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "I2CS_DEV_ID,I2C Slave Device ID Register"
|
|
bitfld.long 0x00 14. " SLAVE_RESET ,Slave reset" "Not reset,Reset"
|
|
bitfld.long 0x00 12. " TEN_BIT_ID_MODE ,10-bit ID mode" "7-bit mode,10-bit mode"
|
|
hexmask.long.word 0x00 0.--9. 1. " SLAVE_DEV_ID ,Slave device ID"
|
|
else
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "I2CS_DEV_ID,I2C Slave Device ID Register"
|
|
bitfld.long 0x00 14. " SLAVE_RESET ,Slave reset" "Not reset,Reset"
|
|
bitfld.long 0x00 12. " TEN_BIT_ID_MODE ,10-bit ID mode" "7-bit mode,10-bit mode"
|
|
hexmask.long.byte 0x00 0.--6. 1. " SLAVE_DEV_ID ,Slave device ID"
|
|
endif
|
|
group.long 0x08++0x0B
|
|
line.long 0x00 "I2CS_INTFL,I2CS Interrupt Flags"
|
|
eventfld.long 0x00 31. " BYTE31 ,Update Byte 31" "Not updated,Updated"
|
|
eventfld.long 0x00 30. " BYTE30 ,Update Byte 30" "Not updated,Updated"
|
|
eventfld.long 0x00 29. " BYTE29 ,Update Byte 29" "Not updated,Updated"
|
|
eventfld.long 0x00 28. " BYTE28 ,Update Byte 28" "Not updated,Updated"
|
|
textline " "
|
|
eventfld.long 0x00 27. " BYTE27 ,Update Byte 27" "Not updated,Updated"
|
|
eventfld.long 0x00 26. " BYTE26 ,Update Byte 26" "Not updated,Updated"
|
|
eventfld.long 0x00 25. " BYTE25 ,Update Byte 25" "Not updated,Updated"
|
|
eventfld.long 0x00 24. " BYTE24 ,Update Byte 24" "Not updated,Updated"
|
|
textline " "
|
|
eventfld.long 0x00 23. " BYTE23 ,Update Byte 23" "Not updated,Updated"
|
|
eventfld.long 0x00 22. " BYTE22 ,Update Byte 22" "Not updated,Updated"
|
|
eventfld.long 0x00 21. " BYTE21 ,Update Byte 21" "Not updated,Updated"
|
|
eventfld.long 0x00 20. " BYTE20 ,Update Byte 20" "Not updated,Updated"
|
|
textline " "
|
|
eventfld.long 0x00 19. " BYTE19 ,Update Byte 19" "Not updated,Updated"
|
|
eventfld.long 0x00 18. " BYTE18 ,Update Byte 18" "Not updated,Updated"
|
|
eventfld.long 0x00 17. " BYTE17 ,Update Byte 17" "Not updated,Updated"
|
|
eventfld.long 0x00 16. " BYTE16 ,Update Byte 16" "Not updated,Updated"
|
|
textline " "
|
|
eventfld.long 0x00 15. " BYTE15 ,Update Byte 15" "Not updated,Updated"
|
|
eventfld.long 0x00 14. " BYTE14 ,Update Byte 14" "Not updated,Updated"
|
|
eventfld.long 0x00 13. " BYTE13 ,Update Byte 13" "Not updated,Updated"
|
|
eventfld.long 0x00 12. " BYTE12 ,Update Byte 12" "Not updated,Updated"
|
|
textline " "
|
|
eventfld.long 0x00 11. " BYTE11 ,Update Byte 11" "Not updated,Updated"
|
|
eventfld.long 0x00 10. " BYTE10 ,Update Byte 10" "Not updated,Updated"
|
|
eventfld.long 0x00 9. " BYTE9 ,Update Byte 9" "Not updated,Updated"
|
|
eventfld.long 0x00 8. " BYTE8 ,Update Byte 8" "Not updated,Updated"
|
|
textline " "
|
|
eventfld.long 0x00 7. " BYTE7 ,Update Byte 7" "Not updated,Updated"
|
|
eventfld.long 0x00 6. " BYTE6 ,Update Byte 6" "Not updated,Updated"
|
|
eventfld.long 0x00 5. " BYTE5 ,Update Byte 5" "Not updated,Updated"
|
|
eventfld.long 0x00 4. " BYTE4 ,Update Byte 4" "Not updated,Updated"
|
|
textline " "
|
|
eventfld.long 0x00 3. " BYTE3 ,Update Byte 3" "Not updated,Updated"
|
|
eventfld.long 0x00 2. " BYTE2 ,Update Byte 2" "Not updated,Updated"
|
|
eventfld.long 0x00 1. " BYTE1 ,Update Byte 1" "Not updated,Updated"
|
|
eventfld.long 0x00 0. " BYTE0 ,Update Byte 0" "Not updated,Updated"
|
|
line.long 0x04 "I2CS_INTEN,I2CS Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x04 31. " BYTE31 ,Update Byte 31" "Disabled,Enabled"
|
|
bitfld.long 0x04 30. " BYTE30 ,Update Byte 30" "Disabled,Enabled"
|
|
bitfld.long 0x04 29. " BYTE29 ,Update Byte 29" "Disabled,Enabled"
|
|
bitfld.long 0x04 28. " BYTE28 ,Update Byte 28" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 27. " BYTE27 ,Update Byte 27" "Disabled,Enabled"
|
|
bitfld.long 0x04 26. " BYTE26 ,Update Byte 26" "Disabled,Enabled"
|
|
bitfld.long 0x04 25. " BYTE25 ,Update Byte 25" "Disabled,Enabled"
|
|
bitfld.long 0x04 24. " BYTE24 ,Update Byte 24" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 23. " BYTE23 ,Update Byte 23" "Disabled,Enabled"
|
|
bitfld.long 0x04 22. " BYTE22 ,Update Byte 22" "Disabled,Enabled"
|
|
bitfld.long 0x04 21. " BYTE21 ,Update Byte 21" "Disabled,Enabled"
|
|
bitfld.long 0x04 20. " BYTE20 ,Update Byte 20" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 19. " BYTE19 ,Update Byte 19" "Disabled,Enabled"
|
|
bitfld.long 0x04 18. " BYTE18 ,Update Byte 18" "Disabled,Enabled"
|
|
bitfld.long 0x04 17. " BYTE17 ,Update Byte 17" "Disabled,Enabled"
|
|
bitfld.long 0x04 16. " BYTE16 ,Update Byte 16" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 15. " BYTE15 ,Update Byte 15" "Disabled,Enabled"
|
|
bitfld.long 0x04 14. " BYTE14 ,Update Byte 14" "Disabled,Enabled"
|
|
bitfld.long 0x04 13. " BYTE13 ,Update Byte 13" "Disabled,Enabled"
|
|
bitfld.long 0x04 12. " BYTE12 ,Update Byte 12" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 11. " BYTE11 ,Update Byte 11" "Disabled,Enabled"
|
|
bitfld.long 0x04 10. " BYTE10 ,Update Byte 10" "Disabled,Enabled"
|
|
bitfld.long 0x04 9. " BYTE9 ,Update Byte 9" "Disabled,Enabled"
|
|
bitfld.long 0x04 8. " BYTE8 ,Update Byte 8" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 7. " BYTE7 ,Update Byte 7" "Disabled,Enabled"
|
|
bitfld.long 0x04 6. " BYTE6 ,Update Byte 6" "Disabled,Enabled"
|
|
bitfld.long 0x04 5. " BYTE5 ,Update Byte 5" "Disabled,Enabled"
|
|
bitfld.long 0x04 4. " BYTE4 ,Update Byte 4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x04 3. " BYTE3 ,Update Byte 3" "Disabled,Enabled"
|
|
bitfld.long 0x04 2. " BYTE2 ,Update Byte 2" "Disabled,Enabled"
|
|
bitfld.long 0x04 1. " BYTE1 ,Update Byte 1" "Disabled,Enabled"
|
|
bitfld.long 0x04 0. " BYTE0 ,Update Byte 0" "Disabled,Enabled"
|
|
line.long 0x08 "I2CS_DATA_BYTE,I2CS Data Byte"
|
|
rbitfld.long 0x08 9. " DATA_UPDATED_FL ,Byte updated flag" "Not updated,Updated"
|
|
bitfld.long 0x08 8. " READ_ONLY_FL ,Read only flag" "Read/write,Read-only"
|
|
hexmask.long.byte 0x08 0.--7. 1. " DATA_FIELD ,Data field"
|
|
width 0x0B
|
|
tree.end
|
|
tree "SPIM (Serial Peripheral Interface)"
|
|
tree "Master 0"
|
|
base ad:0x4001A000
|
|
width 22.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "SPIM0_MSTR_CFG,SPIM0 Master Configuration Register"
|
|
bitfld.long 0x00 20.--23. " SDIO_SAMPLE_POINT ,SDIO sample point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 18.--19. " INACT_DELAY ,SS inactive timing (module clocks)" "0,2,4,8"
|
|
bitfld.long 0x00 16.--17. " ACT_DELAY ,SS active timing (module clocks)" "0,2,4,8"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " SCK_LO_CLK ,SCK low clocks" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 8.--11. " SCK_HI_CLK ,SCK high clocks" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 6.--7. " PAGE_SIZE ,Page size" "4 bytes,8 bytes,16 bytes,4 bytes"
|
|
textline " "
|
|
bitfld.long 0x00 4.--5. " SPI_MODE ,SPI mode - Clock Polarity/Phase" "High/Rising,High/Falling,Low/Falling,Low/Rising"
|
|
bitfld.long 0x00 3. " THREE_WIRE_MODE ,3-wire mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " SLAVE_SEL ,SPI slave select" "0,1,2,3,4,5,6,7"
|
|
line.long 0x04 "SPIM0_SS_SR_POLARITY,SPIM0 Polarity Control for SS and SR Signals"
|
|
bitfld.long 0x04 15. " FC_POLARITY[7] ,SR 7 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 14. " FC_POLARITY[6] ,SR 6 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 13. " FC_POLARITY[5] ,SR 5 signal polarity - FC Polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 12. " FC_POLARITY[4] ,SR 4 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 11. " FC_POLARITY[3] ,SR 3 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 10. " FC_POLARITY[2] ,SR 2 signal polarity - FC Polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 9. " FC_POLARITY[1] ,SR 1 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 8. " FC_POLARITY[0] ,SR 0 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 7. " SS_POLARITY[7] ,SS 7 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 6. " SS_POLARITY[6] ,SS 6 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 5. " SS_POLARITY[5] ,SS 5 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 4. " SS_POLARITY[4] ,SS 4 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 3. " SS_POLARITY[3] ,SS 3 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 2. " SS_POLARITY[2] ,SS 2 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 1. " SS_POLARITY[1] ,SS 1 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 0. " SS_POLARITY[0] ,SS 0 signal polarity" "Active low,Active high"
|
|
if (((per.l(ad:0x4001A000+0x08))&0x08)==0x08)
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "SPIM0_GEN_CTRL,SPIM0 Master General Control Register"
|
|
bitfld.long 0x00 25. " INVERT_SCK_FB_CLK ,Invert SCK_FB clock" "Not inverted,Inverted"
|
|
bitfld.long 0x00 24. " ENABLE_SCK_FB_MODE ,Enable SCK_FB mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " DEASSERT_ACT_SS ,Deassert currently selected SS" "Not deasserted,Deasserted"
|
|
textline " "
|
|
bitfld.long 0x00 21. " START_RX_ONLY ,Start simple RX only transaction" "Not received-only,Received-only"
|
|
bitfld.long 0x00 20. " SIMPLE_MODE ,Enable SPI simple mode" "No effect,Enabled"
|
|
bitfld.long 0x00 19. " BB_SDIO_DR_EN[3] ,SDIO 3 bit bang drive enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 18. " BB_SDIO_DR_EN[2] ,SDIO 2 bit bang drive enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " BB_SDIO_DR_EN[1] ,SDIO 1 bit bang drive enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " BB_SDIO_DR_EN[0] ,SDIO 0 bit bang drive enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " BB_SDIO_OUT[3] ,SDIO 3 bit bang output" "0,1"
|
|
bitfld.long 0x00 14. " BB_SDIO_OUT[2] ,SDIO 2 bit bang output" "0,1"
|
|
bitfld.long 0x00 13. " BB_SDIO_OUT[1] ,SDIO 1 bit bang output" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 12. " BB_SDIO_OUT[0] ,SDIO 0 bit bang output" "0,1"
|
|
rbitfld.long 0x00 11. " BB_SDIO_IN[3] ,SDIO 3 bit bang input" "0,1"
|
|
rbitfld.long 0x00 10. " BB_SDIO_IN[2] ,SDIO 2 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 9. " BB_SDIO_IN[1] ,SDIO 1 bit bang input" "0,1"
|
|
rbitfld.long 0x00 8. " BB_SDIO_IN[0] ,SDIO 0 bit bang input" "0,1"
|
|
bitfld.long 0x00 6. " BB_SCK_IN_OUT ,Bit bang SCK input/output" "Inactive,Active"
|
|
textline " "
|
|
rbitfld.long 0x00 5. " BB_SR_IN ,Bit bang SR input" "Deasserted,Asserted"
|
|
bitfld.long 0x00 4. " BB_SS_IN_OUT ,Bit bang SS input/output" "Deasserted,Asserted"
|
|
bitfld.long 0x00 3. " BIT_BANG_MODE ,Bit bang mode enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " RX_FIFO_EN ,Results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " TX_FIFO_EN ,Transaction FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " SPI_MSTR_EN ,SPI master enable/disable" "Disabled,Enabled"
|
|
else
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "SPIM0_GEN_CTRL,SPIM0 Master General Control Register"
|
|
bitfld.long 0x00 25. " INVERT_SCK_FB_CLK ,Invert SCK_FB clock" "Not inverted,Inverted"
|
|
bitfld.long 0x00 24. " ENABLE_SCK_FB_MODE ,Enable SCK_FB mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " DEASSERT_ACT_SS ,Deassert currently selected SS" "Not deasserted,Deasserted"
|
|
textline " "
|
|
bitfld.long 0x00 21. " START_RX_ONLY ,Start simple RX only transaction" "Not received-only,Received-only"
|
|
bitfld.long 0x00 20. " SIMPLE_MODE ,Enable SPI simple mode" "No effect,Enabled"
|
|
rbitfld.long 0x00 11. " BB_SDIO_IN[3] ,SDIO 3 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 10. " BB_SDIO_IN[2] ,SDIO 2 bit bang input" "0,1"
|
|
rbitfld.long 0x00 9. " BB_SDIO_IN[1] ,SDIO 1 bit bang input" "0,1"
|
|
rbitfld.long 0x00 8. " BB_SDIO_IN[0] ,SDIO 0 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 5. " BB_SR_IN ,Bit bang SR input" "Deasserted,Asserted"
|
|
bitfld.long 0x00 3. " BIT_BANG_MODE ,Bit bang mode enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " RX_FIFO_EN ,Results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " TX_FIFO_EN ,Transaction FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " SPI_MSTR_EN ,SPI master enable/disable" "Disabled,Enabled"
|
|
endif
|
|
group.long 0x0C++0x13
|
|
line.long 0x00 "SPIM0_FIFO_CTRL,SPIM0 Master FIFO Control Register"
|
|
rbitfld.long 0x00 24.--29. " RX_FIFO_USED ,Result FIFO use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 16.--20. " RX_FIFO_AF_LVL ,Result FIFO AF level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x00 8.--12. " TX_FIFO_USED ,Transaction FIFO AF use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " TX_FIFO_AE_LVL ,transaction FIFO AE level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x04 "SPIM0_SPCL_CTRL,SPIM0 Master Special Mode Controls"
|
|
bitfld.long 0x04 16. " SPECIAL_MODE_3_EN ,Enable special SPI mode 3" "Disabled,Enabled"
|
|
bitfld.long 0x04 11. " SS_SA_SDIO_DR_EN[3] ,SDIO 3 active drive mode" "0,1"
|
|
bitfld.long 0x04 10. " SS_SA_SDIO_DR_EN[2] ,SDIO 2 active drive mode" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 9. " SS_SA_SDIO_DR_EN[1] ,SDIO 1 active drive mode" "0,1"
|
|
bitfld.long 0x04 8. " SS_SA_SDIO_DR_EN[0] ,SDIO 0 active drive mode" "0,1"
|
|
bitfld.long 0x04 7. " SS_SA_SDIO_OUT[3] ,SDIO 3 active output value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 6. " SS_SA_SDIO_OUT[2] ,SDIO 2 active output value" "0,1"
|
|
bitfld.long 0x04 5. " SS_SA_SDIO_OUT[1] ,SDIO 1 active output value" "0,1"
|
|
bitfld.long 0x04 4. " SS_SA_SDIO_OUT[0] ,SDIO 0 active output value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 1. " MISO_FC_EN ,SDIO to SR mode" "Not routed,Routed"
|
|
bitfld.long 0x04 0. " SS_SAMPLE_MODE ,Drive SDIO outputs prior to the assertion of slave select enable" "Disabled,Enabled"
|
|
line.long 0x08 "SPIM0_INTFL,SPIM0 Master Interrupt Flags"
|
|
eventfld.long 0x08 5. " RX_FIFO_AF ,RXFIFO almost full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 4. " TX_FIFO_AE ,TXFIFO almost empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 3. " RX_DONE ,Results done int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x08 2. " TX_READY ,Transaction ready int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 1. " RX_STALLED ,Results stalled int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 0. " TX_STALLED ,Transaction stalled int status" "No interrupt,Interrupt"
|
|
line.long 0x0C "SPIM0_INTEN,SPIM0 Master Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x0C 5. " RX_FIFO_AF ,RXFIFO almost full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 4. " TX_FIFO_AE ,TXFIFO almost empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 3. " RX_DONE ,Results done int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 2. " TX_READY ,Transaction ready int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 1. " RX_STALLED ,Results stalled int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " TX_STALLED ,Transaction stalled ready int enable" "Disabled,Enabled"
|
|
line.long 0x10 "SPIM0_SIMPLE_HEADERS,SPIM0_SIMPLE_HEADERS"
|
|
hexmask.long.word 0x10 16.--29. 1. " RX_ONLY_HEADER ,RX only transaction header"
|
|
hexmask.long.word 0x10 0.--13. 1. " TX_BIDIR_HEADER ,TX bidir transaction header"
|
|
group.long 0xF0000++0x03
|
|
line.long 0x00 "SPIM0_FIFO_TRANS,SPI Master FIFO Write Space for Transaction Setup"
|
|
hgroup.long 0xF0800++0x03
|
|
hide.long 0x00 "SPIM0_FIFO_RSLTS,SPI Master FIFO Read Space for Results Data"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree "Master 1"
|
|
base ad:0x4001B000
|
|
width 22.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "SPIM1_MSTR_CFG,SPIM1 Master Configuration Register"
|
|
bitfld.long 0x00 20.--23. " SDIO_SAMPLE_POINT ,SDIO sample point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 18.--19. " INACT_DELAY ,SS inactive timing (module clocks)" "0,2,4,8"
|
|
bitfld.long 0x00 16.--17. " ACT_DELAY ,SS active timing (module clocks)" "0,2,4,8"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " SCK_LO_CLK ,SCK low clocks" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 8.--11. " SCK_HI_CLK ,SCK high clocks" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 6.--7. " PAGE_SIZE ,Page size" "4 bytes,8 bytes,16 bytes,4 bytes"
|
|
textline " "
|
|
bitfld.long 0x00 4.--5. " SPI_MODE ,SPI mode - Clock Polarity/Phase" "High/Rising,High/Falling,Low/Falling,Low/Rising"
|
|
bitfld.long 0x00 3. " THREE_WIRE_MODE ,3-wire mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " SLAVE_SEL ,SPI slave select" "0,1,2,3,4,5,6,7"
|
|
line.long 0x04 "SPIM1_SS_SR_POLARITY,SPIM1 Polarity Control for SS and SR Signals"
|
|
bitfld.long 0x04 15. " FC_POLARITY[7] ,SR 7 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 14. " FC_POLARITY[6] ,SR 6 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 13. " FC_POLARITY[5] ,SR 5 signal polarity - FC Polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 12. " FC_POLARITY[4] ,SR 4 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 11. " FC_POLARITY[3] ,SR 3 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 10. " FC_POLARITY[2] ,SR 2 signal polarity - FC Polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 9. " FC_POLARITY[1] ,SR 1 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 8. " FC_POLARITY[0] ,SR 0 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 7. " SS_POLARITY[7] ,SS 7 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 6. " SS_POLARITY[6] ,SS 6 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 5. " SS_POLARITY[5] ,SS 5 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 4. " SS_POLARITY[4] ,SS 4 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 3. " SS_POLARITY[3] ,SS 3 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 2. " SS_POLARITY[2] ,SS 2 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 1. " SS_POLARITY[1] ,SS 1 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 0. " SS_POLARITY[0] ,SS 0 signal polarity" "Active low,Active high"
|
|
if (((per.l(ad:0x4001B000+0x08))&0x08)==0x08)
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "SPIM1_GEN_CTRL,SPIM1 Master General Control Register"
|
|
bitfld.long 0x00 25. " INVERT_SCK_FB_CLK ,Invert SCK_FB clock" "Not inverted,Inverted"
|
|
bitfld.long 0x00 24. " ENABLE_SCK_FB_MODE ,Enable SCK_FB mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " DEASSERT_ACT_SS ,Deassert currently selected SS" "Not deasserted,Deasserted"
|
|
textline " "
|
|
bitfld.long 0x00 21. " START_RX_ONLY ,Start simple RX only transaction" "Not received-only,Received-only"
|
|
bitfld.long 0x00 20. " SIMPLE_MODE ,Enable SPI simple mode" "No effect,Enabled"
|
|
bitfld.long 0x00 19. " BB_SDIO_DR_EN[3] ,SDIO 3 bit bang drive enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 18. " BB_SDIO_DR_EN[2] ,SDIO 2 bit bang drive enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " BB_SDIO_DR_EN[1] ,SDIO 1 bit bang drive enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " BB_SDIO_DR_EN[0] ,SDIO 0 bit bang drive enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " BB_SDIO_OUT[3] ,SDIO 3 bit bang output" "0,1"
|
|
bitfld.long 0x00 14. " BB_SDIO_OUT[2] ,SDIO 2 bit bang output" "0,1"
|
|
bitfld.long 0x00 13. " BB_SDIO_OUT[1] ,SDIO 1 bit bang output" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 12. " BB_SDIO_OUT[0] ,SDIO 0 bit bang output" "0,1"
|
|
rbitfld.long 0x00 11. " BB_SDIO_IN[3] ,SDIO 3 bit bang input" "0,1"
|
|
rbitfld.long 0x00 10. " BB_SDIO_IN[2] ,SDIO 2 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 9. " BB_SDIO_IN[1] ,SDIO 1 bit bang input" "0,1"
|
|
rbitfld.long 0x00 8. " BB_SDIO_IN[0] ,SDIO 0 bit bang input" "0,1"
|
|
bitfld.long 0x00 6. " BB_SCK_IN_OUT ,Bit bang SCK input/output" "Inactive,Active"
|
|
textline " "
|
|
rbitfld.long 0x00 5. " BB_SR_IN ,Bit bang SR input" "Deasserted,Asserted"
|
|
bitfld.long 0x00 4. " BB_SS_IN_OUT ,Bit bang SS input/output" "Deasserted,Asserted"
|
|
bitfld.long 0x00 3. " BIT_BANG_MODE ,Bit bang mode enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " RX_FIFO_EN ,Results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " TX_FIFO_EN ,Transaction FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " SPI_MSTR_EN ,SPI master enable/disable" "Disabled,Enabled"
|
|
else
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "SPIM1_GEN_CTRL,SPIM1 Master General Control Register"
|
|
bitfld.long 0x00 25. " INVERT_SCK_FB_CLK ,Invert SCK_FB clock" "Not inverted,Inverted"
|
|
bitfld.long 0x00 24. " ENABLE_SCK_FB_MODE ,Enable SCK_FB mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " DEASSERT_ACT_SS ,Deassert currently selected SS" "Not deasserted,Deasserted"
|
|
textline " "
|
|
bitfld.long 0x00 21. " START_RX_ONLY ,Start simple RX only transaction" "Not received-only,Received-only"
|
|
bitfld.long 0x00 20. " SIMPLE_MODE ,Enable SPI simple mode" "No effect,Enabled"
|
|
rbitfld.long 0x00 11. " BB_SDIO_IN[3] ,SDIO 3 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 10. " BB_SDIO_IN[2] ,SDIO 2 bit bang input" "0,1"
|
|
rbitfld.long 0x00 9. " BB_SDIO_IN[1] ,SDIO 1 bit bang input" "0,1"
|
|
rbitfld.long 0x00 8. " BB_SDIO_IN[0] ,SDIO 0 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 5. " BB_SR_IN ,Bit bang SR input" "Deasserted,Asserted"
|
|
bitfld.long 0x00 3. " BIT_BANG_MODE ,Bit bang mode enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " RX_FIFO_EN ,Results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " TX_FIFO_EN ,Transaction FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " SPI_MSTR_EN ,SPI master enable/disable" "Disabled,Enabled"
|
|
endif
|
|
group.long 0x0C++0x13
|
|
line.long 0x00 "SPIM1_FIFO_CTRL,SPIM1 Master FIFO Control Register"
|
|
rbitfld.long 0x00 24.--29. " RX_FIFO_USED ,Result FIFO use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 16.--20. " RX_FIFO_AF_LVL ,Result FIFO AF level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x00 8.--12. " TX_FIFO_USED ,Transaction FIFO AF use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " TX_FIFO_AE_LVL ,transaction FIFO AE level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x04 "SPIM1_SPCL_CTRL,SPIM1 Master Special Mode Controls"
|
|
bitfld.long 0x04 16. " SPECIAL_MODE_3_EN ,Enable special SPI mode 3" "Disabled,Enabled"
|
|
bitfld.long 0x04 11. " SS_SA_SDIO_DR_EN[3] ,SDIO 3 active drive mode" "0,1"
|
|
bitfld.long 0x04 10. " SS_SA_SDIO_DR_EN[2] ,SDIO 2 active drive mode" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 9. " SS_SA_SDIO_DR_EN[1] ,SDIO 1 active drive mode" "0,1"
|
|
bitfld.long 0x04 8. " SS_SA_SDIO_DR_EN[0] ,SDIO 0 active drive mode" "0,1"
|
|
bitfld.long 0x04 7. " SS_SA_SDIO_OUT[3] ,SDIO 3 active output value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 6. " SS_SA_SDIO_OUT[2] ,SDIO 2 active output value" "0,1"
|
|
bitfld.long 0x04 5. " SS_SA_SDIO_OUT[1] ,SDIO 1 active output value" "0,1"
|
|
bitfld.long 0x04 4. " SS_SA_SDIO_OUT[0] ,SDIO 0 active output value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 1. " MISO_FC_EN ,SDIO to SR mode" "Not routed,Routed"
|
|
bitfld.long 0x04 0. " SS_SAMPLE_MODE ,Drive SDIO outputs prior to the assertion of slave select enable" "Disabled,Enabled"
|
|
line.long 0x08 "SPIM1_INTFL,SPIM1 Master Interrupt Flags"
|
|
eventfld.long 0x08 5. " RX_FIFO_AF ,RXFIFO almost full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 4. " TX_FIFO_AE ,TXFIFO almost empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 3. " RX_DONE ,Results done int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x08 2. " TX_READY ,Transaction ready int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 1. " RX_STALLED ,Results stalled int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 0. " TX_STALLED ,Transaction stalled int status" "No interrupt,Interrupt"
|
|
line.long 0x0C "SPIM1_INTEN,SPIM1 Master Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x0C 5. " RX_FIFO_AF ,RXFIFO almost full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 4. " TX_FIFO_AE ,TXFIFO almost empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 3. " RX_DONE ,Results done int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 2. " TX_READY ,Transaction ready int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 1. " RX_STALLED ,Results stalled int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " TX_STALLED ,Transaction stalled ready int enable" "Disabled,Enabled"
|
|
line.long 0x10 "SPIM1_SIMPLE_HEADERS,SPIM1_SIMPLE_HEADERS"
|
|
hexmask.long.word 0x10 16.--29. 1. " RX_ONLY_HEADER ,RX only transaction header"
|
|
hexmask.long.word 0x10 0.--13. 1. " TX_BIDIR_HEADER ,TX bidir transaction header"
|
|
group.long 0xF0000++0x03
|
|
line.long 0x00 "SPIM1_FIFO_TRANS,SPI Master FIFO Write Space for Transaction Setup"
|
|
hgroup.long 0xF0800++0x03
|
|
hide.long 0x00 "SPIM1_FIFO_RSLTS,SPI Master FIFO Read Space for Results Data"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree "Master 2"
|
|
base ad:0x4001C000
|
|
width 22.
|
|
group.long 0x00++0x07
|
|
line.long 0x00 "SPIM2_MSTR_CFG,SPIM2 Master Configuration Register"
|
|
bitfld.long 0x00 20.--23. " SDIO_SAMPLE_POINT ,SDIO sample point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 18.--19. " INACT_DELAY ,SS inactive timing (module clocks)" "0,2,4,8"
|
|
bitfld.long 0x00 16.--17. " ACT_DELAY ,SS active timing (module clocks)" "0,2,4,8"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " SCK_LO_CLK ,SCK low clocks" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 8.--11. " SCK_HI_CLK ,SCK high clocks" "16,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 6.--7. " PAGE_SIZE ,Page size" "4 bytes,8 bytes,16 bytes,4 bytes"
|
|
textline " "
|
|
bitfld.long 0x00 4.--5. " SPI_MODE ,SPI mode - Clock Polarity/Phase" "High/Rising,High/Falling,Low/Falling,Low/Rising"
|
|
bitfld.long 0x00 3. " THREE_WIRE_MODE ,3-wire mode" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " SLAVE_SEL ,SPI slave select" "0,1,2,3,4,5,6,7"
|
|
line.long 0x04 "SPIM2_SS_SR_POLARITY,SPIM2 Polarity Control for SS and SR Signals"
|
|
bitfld.long 0x04 15. " FC_POLARITY[7] ,SR 7 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 14. " FC_POLARITY[6] ,SR 6 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 13. " FC_POLARITY[5] ,SR 5 signal polarity - FC Polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 12. " FC_POLARITY[4] ,SR 4 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 11. " FC_POLARITY[3] ,SR 3 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 10. " FC_POLARITY[2] ,SR 2 signal polarity - FC Polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 9. " FC_POLARITY[1] ,SR 1 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 8. " FC_POLARITY[0] ,SR 0 signal polarity - FC Polarity" "Active low,Active high"
|
|
bitfld.long 0x04 7. " SS_POLARITY[7] ,SS 7 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 6. " SS_POLARITY[6] ,SS 6 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 5. " SS_POLARITY[5] ,SS 5 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 4. " SS_POLARITY[4] ,SS 4 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 3. " SS_POLARITY[3] ,SS 3 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 2. " SS_POLARITY[2] ,SS 2 signal polarity" "Active low,Active high"
|
|
bitfld.long 0x04 1. " SS_POLARITY[1] ,SS 1 signal polarity" "Active low,Active high"
|
|
textline " "
|
|
bitfld.long 0x04 0. " SS_POLARITY[0] ,SS 0 signal polarity" "Active low,Active high"
|
|
if (((per.l(ad:0x4001C000+0x08))&0x08)==0x08)
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "SPIM2_GEN_CTRL,SPIM2 Master General Control Register"
|
|
bitfld.long 0x00 25. " INVERT_SCK_FB_CLK ,Invert SCK_FB clock" "Not inverted,Inverted"
|
|
bitfld.long 0x00 24. " ENABLE_SCK_FB_MODE ,Enable SCK_FB mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " DEASSERT_ACT_SS ,Deassert currently selected SS" "Not deasserted,Deasserted"
|
|
textline " "
|
|
bitfld.long 0x00 21. " START_RX_ONLY ,Start simple RX only transaction" "Not received-only,Received-only"
|
|
bitfld.long 0x00 20. " SIMPLE_MODE ,Enable SPI simple mode" "No effect,Enabled"
|
|
bitfld.long 0x00 19. " BB_SDIO_DR_EN[3] ,SDIO 3 bit bang drive enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 18. " BB_SDIO_DR_EN[2] ,SDIO 2 bit bang drive enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 17. " BB_SDIO_DR_EN[1] ,SDIO 1 bit bang drive enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 16. " BB_SDIO_DR_EN[0] ,SDIO 0 bit bang drive enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 15. " BB_SDIO_OUT[3] ,SDIO 3 bit bang output" "0,1"
|
|
bitfld.long 0x00 14. " BB_SDIO_OUT[2] ,SDIO 2 bit bang output" "0,1"
|
|
bitfld.long 0x00 13. " BB_SDIO_OUT[1] ,SDIO 1 bit bang output" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 12. " BB_SDIO_OUT[0] ,SDIO 0 bit bang output" "0,1"
|
|
rbitfld.long 0x00 11. " BB_SDIO_IN[3] ,SDIO 3 bit bang input" "0,1"
|
|
rbitfld.long 0x00 10. " BB_SDIO_IN[2] ,SDIO 2 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 9. " BB_SDIO_IN[1] ,SDIO 1 bit bang input" "0,1"
|
|
rbitfld.long 0x00 8. " BB_SDIO_IN[0] ,SDIO 0 bit bang input" "0,1"
|
|
bitfld.long 0x00 6. " BB_SCK_IN_OUT ,Bit bang SCK input/output" "Inactive,Active"
|
|
textline " "
|
|
rbitfld.long 0x00 5. " BB_SR_IN ,Bit bang SR input" "Deasserted,Asserted"
|
|
bitfld.long 0x00 4. " BB_SS_IN_OUT ,Bit bang SS input/output" "Deasserted,Asserted"
|
|
bitfld.long 0x00 3. " BIT_BANG_MODE ,Bit bang mode enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " RX_FIFO_EN ,Results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " TX_FIFO_EN ,Transaction FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " SPI_MSTR_EN ,SPI master enable/disable" "Disabled,Enabled"
|
|
else
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "SPIM2_GEN_CTRL,SPIM2 Master General Control Register"
|
|
bitfld.long 0x00 25. " INVERT_SCK_FB_CLK ,Invert SCK_FB clock" "Not inverted,Inverted"
|
|
bitfld.long 0x00 24. " ENABLE_SCK_FB_MODE ,Enable SCK_FB mode" "Disabled,Enabled"
|
|
bitfld.long 0x00 22. " DEASSERT_ACT_SS ,Deassert currently selected SS" "Not deasserted,Deasserted"
|
|
textline " "
|
|
bitfld.long 0x00 21. " START_RX_ONLY ,Start simple RX only transaction" "Not received-only,Received-only"
|
|
bitfld.long 0x00 20. " SIMPLE_MODE ,Enable SPI simple mode" "No effect,Enabled"
|
|
rbitfld.long 0x00 11. " BB_SDIO_IN[3] ,SDIO 3 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 10. " BB_SDIO_IN[2] ,SDIO 2 bit bang input" "0,1"
|
|
rbitfld.long 0x00 9. " BB_SDIO_IN[1] ,SDIO 1 bit bang input" "0,1"
|
|
rbitfld.long 0x00 8. " BB_SDIO_IN[0] ,SDIO 0 bit bang input" "0,1"
|
|
textline " "
|
|
rbitfld.long 0x00 5. " BB_SR_IN ,Bit bang SR input" "Deasserted,Asserted"
|
|
bitfld.long 0x00 3. " BIT_BANG_MODE ,Bit bang mode enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 2. " RX_FIFO_EN ,Results FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " TX_FIFO_EN ,Transaction FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " SPI_MSTR_EN ,SPI master enable/disable" "Disabled,Enabled"
|
|
endif
|
|
group.long 0x0C++0x13
|
|
line.long 0x00 "SPIM2_FIFO_CTRL,SPIM2 Master FIFO Control Register"
|
|
rbitfld.long 0x00 24.--29. " RX_FIFO_USED ,Result FIFO use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 16.--20. " RX_FIFO_AF_LVL ,Result FIFO AF level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x00 8.--12. " TX_FIFO_USED ,Transaction FIFO AF use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
textline " "
|
|
bitfld.long 0x00 0.--3. " TX_FIFO_AE_LVL ,transaction FIFO AE level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x04 "SPIM2_SPCL_CTRL,SPIM2 Master Special Mode Controls"
|
|
bitfld.long 0x04 16. " SPECIAL_MODE_3_EN ,Enable special SPI mode 3" "Disabled,Enabled"
|
|
bitfld.long 0x04 11. " SS_SA_SDIO_DR_EN[3] ,SDIO 3 active drive mode" "0,1"
|
|
bitfld.long 0x04 10. " SS_SA_SDIO_DR_EN[2] ,SDIO 2 active drive mode" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 9. " SS_SA_SDIO_DR_EN[1] ,SDIO 1 active drive mode" "0,1"
|
|
bitfld.long 0x04 8. " SS_SA_SDIO_DR_EN[0] ,SDIO 0 active drive mode" "0,1"
|
|
bitfld.long 0x04 7. " SS_SA_SDIO_OUT[3] ,SDIO 3 active output value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 6. " SS_SA_SDIO_OUT[2] ,SDIO 2 active output value" "0,1"
|
|
bitfld.long 0x04 5. " SS_SA_SDIO_OUT[1] ,SDIO 1 active output value" "0,1"
|
|
bitfld.long 0x04 4. " SS_SA_SDIO_OUT[0] ,SDIO 0 active output value" "0,1"
|
|
textline " "
|
|
bitfld.long 0x04 1. " MISO_FC_EN ,SDIO to SR mode" "Not routed,Routed"
|
|
bitfld.long 0x04 0. " SS_SAMPLE_MODE ,Drive SDIO outputs prior to the assertion of slave select enable" "Disabled,Enabled"
|
|
line.long 0x08 "SPIM2_INTFL,SPIM2 Master Interrupt Flags"
|
|
eventfld.long 0x08 5. " RX_FIFO_AF ,RXFIFO almost full int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 4. " TX_FIFO_AE ,TXFIFO almost empty int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 3. " RX_DONE ,Results done int status" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x08 2. " TX_READY ,Transaction ready int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 1. " RX_STALLED ,Results stalled int status" "No interrupt,Interrupt"
|
|
eventfld.long 0x08 0. " TX_STALLED ,Transaction stalled int status" "No interrupt,Interrupt"
|
|
line.long 0x0C "SPIM2_INTEN,SPIM2 Master Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x0C 5. " RX_FIFO_AF ,RXFIFO almost full int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 4. " TX_FIFO_AE ,TXFIFO almost empty int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 3. " RX_DONE ,Results done int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 2. " TX_READY ,Transaction ready int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 1. " RX_STALLED ,Results stalled int enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " TX_STALLED ,Transaction stalled ready int enable" "Disabled,Enabled"
|
|
line.long 0x10 "SPIM2_SIMPLE_HEADERS,SPIM2_SIMPLE_HEADERS"
|
|
hexmask.long.word 0x10 16.--29. 1. " RX_ONLY_HEADER ,RX only transaction header"
|
|
hexmask.long.word 0x10 0.--13. 1. " TX_BIDIR_HEADER ,TX bidir transaction header"
|
|
group.long 0xF0000++0x03
|
|
line.long 0x00 "SPIM2_FIFO_TRANS,SPI Master FIFO Write Space for Transaction Setup"
|
|
hgroup.long 0xF0800++0x03
|
|
hide.long 0x00 "SPIM2_FIFO_RSLTS,SPI Master FIFO Read Space for Results Data"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "UART (Universal Asynchronous Receiver and Transmitter)"
|
|
tree "UART 0"
|
|
base ad:0x40012000
|
|
width 20.
|
|
group.long 0x00++0x1B
|
|
line.long 0x00 "UART0_CTRL,UART0 Control Register"
|
|
bitfld.long 0x00 20.--25. " RTS_LEVEL ,RX FIFO LTE level for RTS assert" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 19. " RTS_POLARITY ,RTS polarity" "High,Low"
|
|
bitfld.long 0x00 18. " RTS_EN ,RTS enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 17. " CTS_POLARITY ,CTS polarity" "High,Low"
|
|
bitfld.long 0x00 16. " CTS_EN ,CTS enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 12.--13. " PARITY ,Parity mode" "Disabled,Odd,Even,Mark/Space"
|
|
textline " "
|
|
bitfld.long 0x00 8. " EXTRA_STOP ,Extra stop enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--5. " DATA_SIZE ,Data size" "5 bits,6 bits,7 bits,8 bits"
|
|
bitfld.long 0x00 2. " TX_FIFO_EN ,TX FIFO enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " RX_FIFO_EN ,RX FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " UART_EN ,UART enable" "Disabled,Enabled"
|
|
line.long 0x04 "UART0_BAUD,UART0 Baud Control Register"
|
|
bitfld.long 0x04 8.--9. " BAUD_MODE ,Baud mode (baud clock divisor)" "/16,/8,/4,"
|
|
hexmask.long.byte 0x04 0.--7. 1. " BAUD_DIVISOR ,Baud divisor"
|
|
line.long 0x08 "UART0_TX_FIFO_CTRL,UART0 TX Fifo Control Register"
|
|
bitfld.long 0x08 16.--20. " FIFO_AE_LVL ,TX FIFO AE level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x08 0.--5. " FIFO_ENTRY ,TX FIFO entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x0C "UART0_RX_FIFO_CTRL,UART0 RX Fifo Control Register"
|
|
bitfld.long 0x0C 16.--20. " FIFO_AF_LVL ,RX FIFO AF level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x0C 0.--5. " FIFO_ENTRY ,RX FIFO entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x10 "UART0_RX_FIFO_CTRL,UART0 Multidrop Control Register"
|
|
bitfld.long 0x10 17. " TX_ADDR_MARK ,TX address mark" "Not marked,Marked"
|
|
bitfld.long 0x10 16. " MD_MSTR ,Multidrop master" "Slave,Master"
|
|
hexmask.long.byte 0x10 8.--15. 1. " SLAVE_ADDR_MSK ,Slave address mask"
|
|
textline " "
|
|
hexmask.long.byte 0x10 0.--7. 1. " SLAVE_ADDR ,Slave address"
|
|
line.long 0x14 "UART0_INTFL,UART0 Interrupt Flags"
|
|
eventfld.long 0x14 8. " RX_PARITY_ERR ,RX parity error interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 7. " RX_FRAMING_ERR ,RX framing error interrupt Flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 6. " RX_FIFO_OVERFLOW ,RX FIFO overflow interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x14 5. " RX_FIFO_AF ,RX FIFO almost full interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 4. " RX_STALLED ,RX stalled interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 3. " RX_FIFO_NOT_EMPTY ,RX FIFO not empty interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x14 2. " TX_FIFO_AE ,TX FIFO almost empty interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 1. " TX_UNSTALLED ,TX unstalled interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 0. " TX_DONE ,TX done interrupt flag" "No interrupt,Interrupt"
|
|
line.long 0x18 "UART0_INTEN,UART0 Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x18 8. " RX_PARITY_ERR ,RX parity error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 7. " RX_FRAMING_ERR ,RX framing error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 6. " RX_FIFO_OVERFLOW ,RX FIFO overflow interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 5. " RX_FIFO_AF ,RX FIFO almost full interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 4. " RX_STALLED ,RX stalled interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 3. " RX_FIFO_NOT_EMPTY ,RX FIFO not empty interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 2. " TX_FIFO_AE ,TX FIFO almost empty interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 1. " TX_UNSTALLED ,TX FIFO unstalled interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 0. " TX_DONE ,TX done interrupt enable" "Disabled,Enabled"
|
|
group.long 0xF1000++0x03
|
|
line.long 0x00 "UART0_FIFO_TX,FIFO Write Point for Data to Transmit"
|
|
hgroup.long 0xF1800++0x03
|
|
hide.long 0x00 "UAR0n_FIFO_RX,FIFO Read Point for Data to Transmit"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree "UART 1"
|
|
base ad:0x40013000
|
|
width 20.
|
|
group.long 0x00++0x1B
|
|
line.long 0x00 "UART1_CTRL,UART1 Control Register"
|
|
bitfld.long 0x00 20.--25. " RTS_LEVEL ,RX FIFO LTE level for RTS assert" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 19. " RTS_POLARITY ,RTS polarity" "High,Low"
|
|
bitfld.long 0x00 18. " RTS_EN ,RTS enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 17. " CTS_POLARITY ,CTS polarity" "High,Low"
|
|
bitfld.long 0x00 16. " CTS_EN ,CTS enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 12.--13. " PARITY ,Parity mode" "Disabled,Odd,Even,Mark/Space"
|
|
textline " "
|
|
bitfld.long 0x00 8. " EXTRA_STOP ,Extra stop enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--5. " DATA_SIZE ,Data size" "5 bits,6 bits,7 bits,8 bits"
|
|
bitfld.long 0x00 2. " TX_FIFO_EN ,TX FIFO enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " RX_FIFO_EN ,RX FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " UART_EN ,UART enable" "Disabled,Enabled"
|
|
line.long 0x04 "UART1_BAUD,UART1 Baud Control Register"
|
|
bitfld.long 0x04 8.--9. " BAUD_MODE ,Baud mode (baud clock divisor)" "/16,/8,/4,"
|
|
hexmask.long.byte 0x04 0.--7. 1. " BAUD_DIVISOR ,Baud divisor"
|
|
line.long 0x08 "UART1_TX_FIFO_CTRL,UART1 TX Fifo Control Register"
|
|
bitfld.long 0x08 16.--20. " FIFO_AE_LVL ,TX FIFO AE level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x08 0.--5. " FIFO_ENTRY ,TX FIFO entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x0C "UART1_RX_FIFO_CTRL,UART1 RX Fifo Control Register"
|
|
bitfld.long 0x0C 16.--20. " FIFO_AF_LVL ,RX FIFO AF level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x0C 0.--5. " FIFO_ENTRY ,RX FIFO entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x10 "UART1_RX_FIFO_CTRL,UART1 Multidrop Control Register"
|
|
bitfld.long 0x10 17. " TX_ADDR_MARK ,TX address mark" "Not marked,Marked"
|
|
bitfld.long 0x10 16. " MD_MSTR ,Multidrop master" "Slave,Master"
|
|
hexmask.long.byte 0x10 8.--15. 1. " SLAVE_ADDR_MSK ,Slave address mask"
|
|
textline " "
|
|
hexmask.long.byte 0x10 0.--7. 1. " SLAVE_ADDR ,Slave address"
|
|
line.long 0x14 "UART1_INTFL,UART1 Interrupt Flags"
|
|
eventfld.long 0x14 8. " RX_PARITY_ERR ,RX parity error interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 7. " RX_FRAMING_ERR ,RX framing error interrupt Flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 6. " RX_FIFO_OVERFLOW ,RX FIFO overflow interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x14 5. " RX_FIFO_AF ,RX FIFO almost full interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 4. " RX_STALLED ,RX stalled interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 3. " RX_FIFO_NOT_EMPTY ,RX FIFO not empty interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x14 2. " TX_FIFO_AE ,TX FIFO almost empty interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 1. " TX_UNSTALLED ,TX unstalled interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 0. " TX_DONE ,TX done interrupt flag" "No interrupt,Interrupt"
|
|
line.long 0x18 "UART1_INTEN,UART1 Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x18 8. " RX_PARITY_ERR ,RX parity error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 7. " RX_FRAMING_ERR ,RX framing error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 6. " RX_FIFO_OVERFLOW ,RX FIFO overflow interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 5. " RX_FIFO_AF ,RX FIFO almost full interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 4. " RX_STALLED ,RX stalled interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 3. " RX_FIFO_NOT_EMPTY ,RX FIFO not empty interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 2. " TX_FIFO_AE ,TX FIFO almost empty interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 1. " TX_UNSTALLED ,TX FIFO unstalled interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 0. " TX_DONE ,TX done interrupt enable" "Disabled,Enabled"
|
|
group.long 0xF1000++0x03
|
|
line.long 0x00 "UART1_FIFO_TX,FIFO Write Point for Data to Transmit"
|
|
hgroup.long 0xF1800++0x03
|
|
hide.long 0x00 "UAR1n_FIFO_RX,FIFO Read Point for Data to Transmit"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree "UART 2"
|
|
base ad:0x40014000
|
|
width 20.
|
|
group.long 0x00++0x1B
|
|
line.long 0x00 "UART2_CTRL,UART2 Control Register"
|
|
bitfld.long 0x00 20.--25. " RTS_LEVEL ,RX FIFO LTE level for RTS assert" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 19. " RTS_POLARITY ,RTS polarity" "High,Low"
|
|
bitfld.long 0x00 18. " RTS_EN ,RTS enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 17. " CTS_POLARITY ,CTS polarity" "High,Low"
|
|
bitfld.long 0x00 16. " CTS_EN ,CTS enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 12.--13. " PARITY ,Parity mode" "Disabled,Odd,Even,Mark/Space"
|
|
textline " "
|
|
bitfld.long 0x00 8. " EXTRA_STOP ,Extra stop enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--5. " DATA_SIZE ,Data size" "5 bits,6 bits,7 bits,8 bits"
|
|
bitfld.long 0x00 2. " TX_FIFO_EN ,TX FIFO enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " RX_FIFO_EN ,RX FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " UART_EN ,UART enable" "Disabled,Enabled"
|
|
line.long 0x04 "UART2_BAUD,UART2 Baud Control Register"
|
|
bitfld.long 0x04 8.--9. " BAUD_MODE ,Baud mode (baud clock divisor)" "/16,/8,/4,"
|
|
hexmask.long.byte 0x04 0.--7. 1. " BAUD_DIVISOR ,Baud divisor"
|
|
line.long 0x08 "UART2_TX_FIFO_CTRL,UART2 TX Fifo Control Register"
|
|
bitfld.long 0x08 16.--20. " FIFO_AE_LVL ,TX FIFO AE level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x08 0.--5. " FIFO_ENTRY ,TX FIFO entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x0C "UART2_RX_FIFO_CTRL,UART2 RX Fifo Control Register"
|
|
bitfld.long 0x0C 16.--20. " FIFO_AF_LVL ,RX FIFO AF level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x0C 0.--5. " FIFO_ENTRY ,RX FIFO entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x10 "UART2_RX_FIFO_CTRL,UART2 Multidrop Control Register"
|
|
bitfld.long 0x10 17. " TX_ADDR_MARK ,TX address mark" "Not marked,Marked"
|
|
bitfld.long 0x10 16. " MD_MSTR ,Multidrop master" "Slave,Master"
|
|
hexmask.long.byte 0x10 8.--15. 1. " SLAVE_ADDR_MSK ,Slave address mask"
|
|
textline " "
|
|
hexmask.long.byte 0x10 0.--7. 1. " SLAVE_ADDR ,Slave address"
|
|
line.long 0x14 "UART2_INTFL,UART2 Interrupt Flags"
|
|
eventfld.long 0x14 8. " RX_PARITY_ERR ,RX parity error interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 7. " RX_FRAMING_ERR ,RX framing error interrupt Flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 6. " RX_FIFO_OVERFLOW ,RX FIFO overflow interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x14 5. " RX_FIFO_AF ,RX FIFO almost full interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 4. " RX_STALLED ,RX stalled interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 3. " RX_FIFO_NOT_EMPTY ,RX FIFO not empty interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x14 2. " TX_FIFO_AE ,TX FIFO almost empty interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 1. " TX_UNSTALLED ,TX unstalled interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 0. " TX_DONE ,TX done interrupt flag" "No interrupt,Interrupt"
|
|
line.long 0x18 "UART2_INTEN,UART2 Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x18 8. " RX_PARITY_ERR ,RX parity error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 7. " RX_FRAMING_ERR ,RX framing error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 6. " RX_FIFO_OVERFLOW ,RX FIFO overflow interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 5. " RX_FIFO_AF ,RX FIFO almost full interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 4. " RX_STALLED ,RX stalled interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 3. " RX_FIFO_NOT_EMPTY ,RX FIFO not empty interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 2. " TX_FIFO_AE ,TX FIFO almost empty interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 1. " TX_UNSTALLED ,TX FIFO unstalled interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 0. " TX_DONE ,TX done interrupt enable" "Disabled,Enabled"
|
|
group.long 0xF1000++0x03
|
|
line.long 0x00 "UART2_FIFO_TX,FIFO Write Point for Data to Transmit"
|
|
hgroup.long 0xF1800++0x03
|
|
hide.long 0x00 "UAR2n_FIFO_RX,FIFO Read Point for Data to Transmit"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree "UART 3"
|
|
base ad:0x40015000
|
|
width 20.
|
|
group.long 0x00++0x1B
|
|
line.long 0x00 "UART3_CTRL,UART3 Control Register"
|
|
bitfld.long 0x00 20.--25. " RTS_LEVEL ,RX FIFO LTE level for RTS assert" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x00 19. " RTS_POLARITY ,RTS polarity" "High,Low"
|
|
bitfld.long 0x00 18. " RTS_EN ,RTS enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 17. " CTS_POLARITY ,CTS polarity" "High,Low"
|
|
bitfld.long 0x00 16. " CTS_EN ,CTS enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 12.--13. " PARITY ,Parity mode" "Disabled,Odd,Even,Mark/Space"
|
|
textline " "
|
|
bitfld.long 0x00 8. " EXTRA_STOP ,Extra stop enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--5. " DATA_SIZE ,Data size" "5 bits,6 bits,7 bits,8 bits"
|
|
bitfld.long 0x00 2. " TX_FIFO_EN ,TX FIFO enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " RX_FIFO_EN ,RX FIFO enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " UART_EN ,UART enable" "Disabled,Enabled"
|
|
line.long 0x04 "UART3_BAUD,UART3 Baud Control Register"
|
|
bitfld.long 0x04 8.--9. " BAUD_MODE ,Baud mode (baud clock divisor)" "/16,/8,/4,"
|
|
hexmask.long.byte 0x04 0.--7. 1. " BAUD_DIVISOR ,Baud divisor"
|
|
line.long 0x08 "UART3_TX_FIFO_CTRL,UART3 TX Fifo Control Register"
|
|
bitfld.long 0x08 16.--20. " FIFO_AE_LVL ,TX FIFO AE level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x08 0.--5. " FIFO_ENTRY ,TX FIFO entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x0C "UART3_RX_FIFO_CTRL,UART3 RX Fifo Control Register"
|
|
bitfld.long 0x0C 16.--20. " FIFO_AF_LVL ,RX FIFO AF level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31"
|
|
rbitfld.long 0x0C 0.--5. " FIFO_ENTRY ,RX FIFO entries" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
line.long 0x10 "UART3_RX_FIFO_CTRL,UART3 Multidrop Control Register"
|
|
bitfld.long 0x10 17. " TX_ADDR_MARK ,TX address mark" "Not marked,Marked"
|
|
bitfld.long 0x10 16. " MD_MSTR ,Multidrop master" "Slave,Master"
|
|
hexmask.long.byte 0x10 8.--15. 1. " SLAVE_ADDR_MSK ,Slave address mask"
|
|
textline " "
|
|
hexmask.long.byte 0x10 0.--7. 1. " SLAVE_ADDR ,Slave address"
|
|
line.long 0x14 "UART3_INTFL,UART3 Interrupt Flags"
|
|
eventfld.long 0x14 8. " RX_PARITY_ERR ,RX parity error interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 7. " RX_FRAMING_ERR ,RX framing error interrupt Flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 6. " RX_FIFO_OVERFLOW ,RX FIFO overflow interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x14 5. " RX_FIFO_AF ,RX FIFO almost full interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 4. " RX_STALLED ,RX stalled interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 3. " RX_FIFO_NOT_EMPTY ,RX FIFO not empty interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x14 2. " TX_FIFO_AE ,TX FIFO almost empty interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 1. " TX_UNSTALLED ,TX unstalled interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 0. " TX_DONE ,TX done interrupt flag" "No interrupt,Interrupt"
|
|
line.long 0x18 "UART3_INTEN,UART3 Interrupt Enable/Disable Controls"
|
|
bitfld.long 0x18 8. " RX_PARITY_ERR ,RX parity error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 7. " RX_FRAMING_ERR ,RX framing error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 6. " RX_FIFO_OVERFLOW ,RX FIFO overflow interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 5. " RX_FIFO_AF ,RX FIFO almost full interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 4. " RX_STALLED ,RX stalled interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 3. " RX_FIFO_NOT_EMPTY ,RX FIFO not empty interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x18 2. " TX_FIFO_AE ,TX FIFO almost empty interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 1. " TX_UNSTALLED ,TX FIFO unstalled interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x18 0. " TX_DONE ,TX done interrupt enable" "Disabled,Enabled"
|
|
group.long 0xF1000++0x03
|
|
line.long 0x00 "UART3_FIFO_TX,FIFO Write Point for Data to Transmit"
|
|
hgroup.long 0xF1800++0x03
|
|
hide.long 0x00 "UAR3n_FIFO_RX,FIFO Read Point for Data to Transmit"
|
|
in
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "USB (Universal Serial Bus)"
|
|
base ad:0x40100000
|
|
width 17.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "USB_CN,USB Control Register"
|
|
bitfld.long 0x00 0. " USB_EN ,USB device interface enable" "Disabled,Enabled"
|
|
rgroup.long 0x200++0x03
|
|
line.long 0x00 "USB_DEV_ADDR,USB Device Address Register"
|
|
hexmask.long.byte 0x00 0.--6. 1. " DEV_ADDR ,USB device address"
|
|
group.long 0x204++0x0B
|
|
line.long 0x00 "USB_DEV_CN,USB Device Control Register"
|
|
bitfld.long 0x00 9. " FIFO_MODE ,FIFO mode" "Normal,Immediate"
|
|
bitfld.long 0x00 8. " BACT_OE ,BACT OE (Test only)" "0,1"
|
|
bitfld.long 0x00 7. " OSCEN ,OSC En (Test only)" "0,1"
|
|
bitfld.long 0x00 6. " VBGATE ,VBUS Gate (Test only)" "Independent,Dependent"
|
|
textline " "
|
|
bitfld.long 0x00 5. " URST ,USB device controller reset" "Not reset,Reset"
|
|
bitfld.long 0x00 4. " ULPM ,USB low power mode" "No,Yes"
|
|
bitfld.long 0x00 3. " CONNECT ,Connect to USB" "Disconnected,Connected"
|
|
bitfld.long 0x00 2. " SIGRWU ,USB signal remote wakeup" "Not sent,Sent"
|
|
line.long 0x04 "USB_DEV_INTFL,USB Device Interrupt"
|
|
rbitfld.long 0x04 16. " VBUS_ST ,VBUS status" "Low,High"
|
|
eventfld.long 0x04 13. " BUF_OVR ,Buffer overflow interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 12. " DMA_ERR ,DMA error interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 11. " EP_NAK ,Endpoint NAK interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x04 10. " EP_OUT ,Endpoint OUT interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 9. " EP_IN ,Endpoint IN interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 8. " SETUP ,Setup packet interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 7. " BRST_DN ,USB bus reset completed interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x04 6. " VBUS ,VBUS detect interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 5. " NO_VBUS ,No VBUS interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 4. " SUSP ,USB suspend interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 3. " BRST ,USB bus reset in progress interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x04 2. " BACT ,USB bus activity interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 1. " RWU_DN ,Remote wakeup done interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x04 0. " DPACT ,DPLUS activity interrupt flag" "No interrupt,Interrupt"
|
|
line.long 0x08 "USB_DEV_INTEN,USB Device Interrupt Enable"
|
|
bitfld.long 0x08 13. " BUF_OVR ,Buffer overflow interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 12. " DMA_ERR ,DMA error interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 11. " EP_NAK ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 10. " EP_OUT ,Endpoint OUT interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 9. " EP_IN ,Endpoint IN interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 8. " SETUP ,Setup packet interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 7. " BRST_DN ,USB bus reset completed interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 6. " VBUS ,VBUS detect interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 5. " NO_VBUS ,No VBUS interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 4. " SUSP ,USB suspend interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 3. " BRST ,USB bus reset in progress interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 2. " BACT ,USB bus activity interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x08 1. " RWU_DN ,Remote wakeup done interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 0. " DPACT ,DPLUS activity interrupt enable" "Disabled,Enabled"
|
|
group.long 0x220++0x03
|
|
line.long 0x00 "USB_EP_BASE,USB Endpoint Descriptor Table Base Address"
|
|
hexmask.long.tbyte 0x00 9.--31. 0x02 " EP_BASE ,USB endpoint descriptor table base address"
|
|
sif (cpuis("MAX3260*"))
|
|
rgroup.long 0x224++0x03
|
|
line.long 0x00 "USB_CUR_BUF,USB Current Endpoint Buffer Register"
|
|
bitfld.long 0x00 23. " IN_BUF[7] ,IN transfer current buffer - bit 7" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 22. " [6] ,IN transfer current buffer - bit 6" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 21. " [5] ,IN transfer current buffer - bit 5" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 20. " [4] ,IN transfer current buffer - bit 4" "Buffer 0,Buffer 1"
|
|
textline " "
|
|
bitfld.long 0x00 19. " [3] ,IN transfer current buffer - bit 3" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 18. " [2] ,IN transfer current buffer - bit 2" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 17. " [1] ,IN transfer current buffer - bit 1" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 16. " [0] ,IN transfer current buffer - bit 0" "Buffer 0,Buffer 1"
|
|
textline " "
|
|
bitfld.long 0x00 7. " OUT_BUF[7] ,OUT transfer current buffer - bit 7" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 6. " [6] ,OUT transfer current buffer - bit 6" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 5. " [5] ,OUT transfer current buffer - bit 5" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 4. " [4] ,OUT transfer current buffer - bit 4" "Buffer 0,Buffer 1"
|
|
textline " "
|
|
bitfld.long 0x00 3. " [3] ,OUT transfer current buffer - bit 3" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 2. " [2] ,OUT transfer current buffer - bit 2" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 1. " [1] ,OUT transfer current buffer - bit 1" "Buffer 0,Buffer 1"
|
|
bitfld.long 0x00 0. " [0] ,OUT transfer current buffer - bit 0" "Buffer 0,Buffer 1"
|
|
else
|
|
rgroup.long 0x224++0x03
|
|
line.long 0x00 "USB_CUR_BUF,USB Current Endpoint Buffer Register"
|
|
bitfld.long 0x00 23. " IN_BUF[7] ,IN transfer current buffer - bit 7" "No,Yes"
|
|
bitfld.long 0x00 22. " [6] ,IN transfer current buffer - bit 6" "No,Yes"
|
|
bitfld.long 0x00 21. " [5] ,IN transfer current buffer - bit 5" "No,Yes"
|
|
bitfld.long 0x00 20. " [4] ,IN transfer current buffer - bit 4" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 19. " [3] ,IN transfer current buffer - bit 3" "No,Yes"
|
|
bitfld.long 0x00 18. " [2] ,IN transfer current buffer - bit 2" "No,Yes"
|
|
bitfld.long 0x00 17. " [1] ,IN transfer current buffer - bit 1" "No,Yes"
|
|
bitfld.long 0x00 16. " [0] ,IN transfer current buffer - bit 0" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 7. " OUT_BUF[7] ,OUT transfer current buffer - bit 7" "No,Yes"
|
|
bitfld.long 0x00 6. " [6] ,OUT transfer current buffer - bit 6" "No,Yes"
|
|
bitfld.long 0x00 5. " [5] ,OUT transfer current buffer - bit 5" "No,Yes"
|
|
bitfld.long 0x00 4. " [4] ,OUT transfer current buffer - bit 4" "No,Yes"
|
|
textline " "
|
|
bitfld.long 0x00 3. " [3] ,OUT transfer current buffer - bit 3" "No,Yes"
|
|
bitfld.long 0x00 2. " [2] ,OUT transfer current buffer - bit 2" "No,Yes"
|
|
bitfld.long 0x00 1. " [1] ,OUT transfer current buffer - bit 1" "No,Yes"
|
|
bitfld.long 0x00 0. " [0] ,OUT transfer current buffer - bit 0" "No,Yes"
|
|
endif
|
|
group.long 0x228++0x1B
|
|
line.long 0x00 "USB_IN_OWNER,USB IN Endpoint Buffer Owner Register"
|
|
bitfld.long 0x00 23. " BUF1_OWNER[7] ,Owner for IN buffer 1 for endpoint 7" "Software,Hardware"
|
|
bitfld.long 0x00 22. " [6] ,Owner for IN buffer 1 for endpoint 6" "Software,Hardware"
|
|
bitfld.long 0x00 21. " [5] ,Owner for IN buffer 1 for endpoint 5" "Software,Hardware"
|
|
bitfld.long 0x00 20. " [4] ,Owner for IN buffer 1 for endpoint 4" "Software,Hardware"
|
|
textline " "
|
|
bitfld.long 0x00 19. " [3] ,Owner for IN buffer 1 for endpoint 3" "Software,Hardware"
|
|
bitfld.long 0x00 18. " [2] ,Owner for IN buffer 1 for endpoint 2" "Software,Hardware"
|
|
bitfld.long 0x00 17. " [1] ,Owner for IN buffer 1 for endpoint 1" "Software,Hardware"
|
|
bitfld.long 0x00 16. " [0] ,Owner for IN buffer 1 for endpoint 0" "Software,Hardware"
|
|
textline " "
|
|
bitfld.long 0x00 7. " BUF0_OWNER[7] ,Owner for IN buffer 0 for endpoint 7" "Software,Hardware"
|
|
bitfld.long 0x00 6. " [6] ,Owner for IN buffer 0 for endpoint 6" "Software,Hardware"
|
|
bitfld.long 0x00 5. " [5] ,Owner for IN buffer 0 for endpoint 5" "Software,Hardware"
|
|
bitfld.long 0x00 4. " [4] ,Owner for IN buffer 0 for endpoint 4" "Software,Hardware"
|
|
textline " "
|
|
bitfld.long 0x00 3. " [3] ,Owner for IN buffer 0 for endpoint 3" "Software,Hardware"
|
|
bitfld.long 0x00 2. " [2] ,Owner for IN buffer 0 for endpoint 2" "Software,Hardware"
|
|
bitfld.long 0x00 1. " [1] ,Owner for IN buffer 0 for endpoint 1" "Software,Hardware"
|
|
bitfld.long 0x00 0. " [0] ,Owner for IN buffer 0 for endpoint 0" "Software,Hardware"
|
|
line.long 0x04 "USB_OUT_OWNER,USB OUT Endpoint Buffer Owner Register"
|
|
bitfld.long 0x04 23. " BUF1_OWNER[7] ,Owner for OUT buffer 1 for endpoint 7" "Software,Hardware"
|
|
bitfld.long 0x04 22. " [6] ,Owner for OUT buffer 1 for endpoint 6" "Software,Hardware"
|
|
bitfld.long 0x04 21. " [5] ,Owner for OUT buffer 1 for endpoint 5" "Software,Hardware"
|
|
bitfld.long 0x04 20. " [4] ,Owner for OUT buffer 1 for endpoint 4" "Software,Hardware"
|
|
textline " "
|
|
bitfld.long 0x04 19. " [3] ,Owner for OUT buffer 1 for endpoint 3" "Software,Hardware"
|
|
bitfld.long 0x04 18. " [2] ,Owner for OUT buffer 1 for endpoint 2" "Software,Hardware"
|
|
bitfld.long 0x04 17. " [1] ,Owner for OUT buffer 1 for endpoint 1" "Software,Hardware"
|
|
bitfld.long 0x04 16. " [0] ,Owner for OUT buffer 1 for endpoint 0" "Software,Hardware"
|
|
textline " "
|
|
bitfld.long 0x04 7. " BUF0_OWNER[7] ,Owner for OUT buffer 0 for endpoint 7" "Software,Hardware"
|
|
bitfld.long 0x04 6. " [6] ,Owner for OUT buffer 0 for endpoint 6" "Software,Hardware"
|
|
bitfld.long 0x04 5. " [5] ,Owner for OUT buffer 0 for endpoint 5" "Software,Hardware"
|
|
bitfld.long 0x04 4. " [4] ,Owner for OUT buffer 0 for endpoint 4" "Software,Hardware"
|
|
textline " "
|
|
bitfld.long 0x04 3. " [3] ,Owner for OUT buffer 0 for endpoint 3" "Software,Hardware"
|
|
bitfld.long 0x04 2. " [2] ,Owner for OUT buffer 0 for endpoint 2" "Software,Hardware"
|
|
bitfld.long 0x04 1. " [1] ,Owner for OUT buffer 0 for endpoint 1" "Software,Hardware"
|
|
bitfld.long 0x04 0. " [0] ,Owner for OUT buffer 0 for endpoint 0" "Software,Hardware"
|
|
line.long 0x08 "USB_IN_INT,USB IN Endpoint Buffer Available Interrupt"
|
|
eventfld.long 0x08 7. " INBAV[7] ,Endpoint 7 buffer available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x08 6. " [6] ,Endpoint 6 buffer available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x08 5. " [5] ,Endpoint 5 buffer available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x08 4. " [4] ,Endpoint 4 buffer available interrupt flag" "Not available,Available"
|
|
textline " "
|
|
eventfld.long 0x08 3. " [3] ,Endpoint 3 buffer available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x08 2. " [2] ,Endpoint 2 buffer available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x08 1. " [1] ,Endpoint 1 buffer available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x08 0. " [0] ,Endpoint 0 buffer available interrupt flag" "Not available,Available"
|
|
line.long 0x0C "USB_OUT_INT,USB OUT Endpoint Data Available Interrupt"
|
|
eventfld.long 0x0C 7. " OUTDAV[7] ,Endpoint 7 data available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x0C 6. " [6] ,Endpoint 6 data available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x0C 5. " [5] ,Endpoint 5 data available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x0C 4. " [4] ,Endpoint 4 data available interrupt flag" "Not available,Available"
|
|
textline " "
|
|
eventfld.long 0x0C 3. " [3] ,Endpoint 3 data available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x0C 2. " [2] ,Endpoint 2 data available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x0C 1. " [1] ,Endpoint 1 data available interrupt flag" "Not available,Available"
|
|
eventfld.long 0x0C 0. " [0] ,Endpoint 0 data available interrupt flag" "Not available,Available"
|
|
line.long 0x10 "USB_NAK_INT,USB IN Endpoint NAK Interrupt"
|
|
eventfld.long 0x10 7. " NAK[7] ,Endpoint NAK7 interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 6. " [6] ,Endpoint NAK6 interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 5. " [5] ,Endpoint NAK5 interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 4. " [4] ,Endpoint NAK4 interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x10 3. " [3] ,Endpoint NAK3 interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 2. " [2] ,Endpoint NAK2 interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 1. " [1] ,Endpoint NAK1 interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 0. " [0] ,Endpoint NAK0 interrupt flag" "No interrupt,Interrupt"
|
|
line.long 0x14 "USB_DMA_ERR_INT,USB DMA Error Interrupt"
|
|
eventfld.long 0x14 7. " DMA_ERR[7] ,Endpoint 7 DMA error interrupt flag" "No error,Error"
|
|
eventfld.long 0x14 6. " [6] ,Endpoint 6 DMA error interrupt flag" "No error,Error"
|
|
eventfld.long 0x14 5. " [5] ,Endpoint 5 DMA error interrupt flag" "No error,Error"
|
|
eventfld.long 0x14 4. " [4] ,Endpoint 4 DMA error interrupt flag" "No error,Error"
|
|
textline " "
|
|
eventfld.long 0x14 3. " [3] ,Endpoint 3 DMA error interrupt flag" "No error,Error"
|
|
eventfld.long 0x14 2. " [2] ,Endpoint 2 DMA error interrupt flag" "No error,Error"
|
|
eventfld.long 0x14 1. " [1] ,Endpoint 1 DMA error interrupt flag" "No error,Error"
|
|
eventfld.long 0x14 0. " [0] ,Endpoint 0 DMA error interrupt flag" "No error,Error"
|
|
line.long 0x18 "USB_BUF_OVR_INT,USB Buffer Overflow Interrupt"
|
|
eventfld.long 0x18 7. " BUF_OVR[7] ,Endpoint 7 buffer overflow interrupt flag" "No overflow,Overflow"
|
|
eventfld.long 0x18 6. " [6] ,Endpoint 6 buffer overflow interrupt flag" "No overflow,Overflow"
|
|
eventfld.long 0x18 5. " [5] ,Endpoint 5 buffer overflow interrupt flag" "No overflow,Overflow"
|
|
eventfld.long 0x18 4. " [4] ,Endpoint 4 buffer overflow interrupt flag" "No overflow,Overflow"
|
|
textline " "
|
|
eventfld.long 0x18 3. " [3] ,Endpoint 3 buffer overflow interrupt flag" "No overflow,Overflow"
|
|
eventfld.long 0x18 2. " [2] ,Endpoint 2 buffer overflow interrupt flag" "No overflow,Overflow"
|
|
eventfld.long 0x18 1. " [1] ,Endpoint 1 buffer overflow interrupt flag" "No overflow,Overflow"
|
|
eventfld.long 0x18 0. " [0] ,Endpoint 0 buffer overflow interrupt flag" "No overflow,Overflow"
|
|
rgroup.long 0x260++0x07
|
|
line.long 0x00 "USB_SETUP0,USB SETUP Packet Bytes 0 to 3"
|
|
hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,SETUP packet byte 3"
|
|
hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,SETUP packet byte 2"
|
|
hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,SETUP packet byte 1"
|
|
hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,SETUP packet byte 0"
|
|
line.long 0x04 "USB_SETUP1,USB SETUP Packet Bytes 4 to 7"
|
|
hexmask.long.byte 0x04 24.--31. 1. " BYTE7 ,SETUP packet byte 7"
|
|
hexmask.long.byte 0x04 16.--23. 1. " BYTE6 ,SETUP packet byte 6"
|
|
hexmask.long.byte 0x04 8.--15. 1. " BYTE5 ,SETUP packet byte 5"
|
|
hexmask.long.byte 0x04 0.--7. 1. " BYTE4 ,SETUP packet byte 4"
|
|
group.long 0x280++0x03
|
|
line.long 0x00 "USB_EP,USB Endpoint 0 Control Register"
|
|
bitfld.long 0x00 10. " EP_ST_ACK ,Endpoint acknowledge status stage of control transfer" "Not acknowledged,Acknowledged"
|
|
bitfld.long 0x00 9. " EP_ST_STALL ,Endpoint stall status stage of control transfer" "Not stalled,Stalled"
|
|
bitfld.long 0x00 8. " EP_STALL ,Endpoint stall" "Not stalled,Stalled"
|
|
bitfld.long 0x00 6. " EP_DT ,Endpoint data toggle clear" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EP_NAK_EN ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EP_INT_EN ,Endpoint transfer complete interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EP_BUF2 ,Endpoint double buffered enable" "Single,Double"
|
|
rbitfld.long 0x00 0.--1. " EP_DIR ,Endpoint direction" ",,,Control"
|
|
sif (cpuis("MAX3260*"))
|
|
group.long 0x280++0x03
|
|
line.long 0x00 "USB_EP,USB Endpoint 0 Control Register"
|
|
bitfld.long 0x00 10. " EP_ST_ACK ,Endpoint acknowledge status stage of control transfer" "Not acknowledged,Acknowledged"
|
|
bitfld.long 0x00 9. " EP_ST_STALL ,Endpoint stall status stage of control transfer" "Not stalled,Stalled"
|
|
bitfld.long 0x00 8. " EP_STALL ,Endpoint stall" "Not stalled,Stalled"
|
|
bitfld.long 0x00 6. " EP_DT ,Endpoint data toggle clear" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EP_NAK_EN ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EP_INT_EN ,Endpoint transfer complete interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EP_BUF2 ,Endpoint double buffered enable" "Single,Double"
|
|
bitfld.long 0x00 0.--1. " EP_DIR ,Endpoint direction" "Disabled,OUT,IN,"
|
|
group.long 0x280++0x03
|
|
line.long 0x00 "USB_EP,USB Endpoint 0 Control Register"
|
|
bitfld.long 0x00 10. " EP_ST_ACK ,Endpoint acknowledge status stage of control transfer" "Not acknowledged,Acknowledged"
|
|
bitfld.long 0x00 9. " EP_ST_STALL ,Endpoint stall status stage of control transfer" "Not stalled,Stalled"
|
|
bitfld.long 0x00 8. " EP_STALL ,Endpoint stall" "Not stalled,Stalled"
|
|
bitfld.long 0x00 6. " EP_DT ,Endpoint data toggle clear" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EP_NAK_EN ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EP_INT_EN ,Endpoint transfer complete interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EP_BUF2 ,Endpoint double buffered enable" "Single,Double"
|
|
bitfld.long 0x00 0.--1. " EP_DIR ,Endpoint direction" "Disabled,OUT,IN,"
|
|
group.long 0x280++0x03
|
|
line.long 0x00 "USB_EP,USB Endpoint 0 Control Register"
|
|
bitfld.long 0x00 10. " EP_ST_ACK ,Endpoint acknowledge status stage of control transfer" "Not acknowledged,Acknowledged"
|
|
bitfld.long 0x00 9. " EP_ST_STALL ,Endpoint stall status stage of control transfer" "Not stalled,Stalled"
|
|
bitfld.long 0x00 8. " EP_STALL ,Endpoint stall" "Not stalled,Stalled"
|
|
bitfld.long 0x00 6. " EP_DT ,Endpoint data toggle clear" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EP_NAK_EN ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EP_INT_EN ,Endpoint transfer complete interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EP_BUF2 ,Endpoint double buffered enable" "Single,Double"
|
|
bitfld.long 0x00 0.--1. " EP_DIR ,Endpoint direction" "Disabled,OUT,IN,"
|
|
group.long 0x280++0x03
|
|
line.long 0x00 "USB_EP,USB Endpoint 0 Control Register"
|
|
bitfld.long 0x00 10. " EP_ST_ACK ,Endpoint acknowledge status stage of control transfer" "Not acknowledged,Acknowledged"
|
|
bitfld.long 0x00 9. " EP_ST_STALL ,Endpoint stall status stage of control transfer" "Not stalled,Stalled"
|
|
bitfld.long 0x00 8. " EP_STALL ,Endpoint stall" "Not stalled,Stalled"
|
|
bitfld.long 0x00 6. " EP_DT ,Endpoint data toggle clear" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EP_NAK_EN ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EP_INT_EN ,Endpoint transfer complete interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EP_BUF2 ,Endpoint double buffered enable" "Single,Double"
|
|
bitfld.long 0x00 0.--1. " EP_DIR ,Endpoint direction" "Disabled,OUT,IN,"
|
|
group.long 0x280++0x03
|
|
line.long 0x00 "USB_EP,USB Endpoint 0 Control Register"
|
|
bitfld.long 0x00 10. " EP_ST_ACK ,Endpoint acknowledge status stage of control transfer" "Not acknowledged,Acknowledged"
|
|
bitfld.long 0x00 9. " EP_ST_STALL ,Endpoint stall status stage of control transfer" "Not stalled,Stalled"
|
|
bitfld.long 0x00 8. " EP_STALL ,Endpoint stall" "Not stalled,Stalled"
|
|
bitfld.long 0x00 6. " EP_DT ,Endpoint data toggle clear" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EP_NAK_EN ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EP_INT_EN ,Endpoint transfer complete interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EP_BUF2 ,Endpoint double buffered enable" "Single,Double"
|
|
bitfld.long 0x00 0.--1. " EP_DIR ,Endpoint direction" "Disabled,OUT,IN,"
|
|
group.long 0x280++0x03
|
|
line.long 0x00 "USB_EP,USB Endpoint 0 Control Register"
|
|
bitfld.long 0x00 10. " EP_ST_ACK ,Endpoint acknowledge status stage of control transfer" "Not acknowledged,Acknowledged"
|
|
bitfld.long 0x00 9. " EP_ST_STALL ,Endpoint stall status stage of control transfer" "Not stalled,Stalled"
|
|
bitfld.long 0x00 8. " EP_STALL ,Endpoint stall" "Not stalled,Stalled"
|
|
bitfld.long 0x00 6. " EP_DT ,Endpoint data toggle clear" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EP_NAK_EN ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EP_INT_EN ,Endpoint transfer complete interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EP_BUF2 ,Endpoint double buffered enable" "Single,Double"
|
|
bitfld.long 0x00 0.--1. " EP_DIR ,Endpoint direction" "Disabled,OUT,IN,"
|
|
group.long 0x280++0x03
|
|
line.long 0x00 "USB_EP,USB Endpoint 0 Control Register"
|
|
bitfld.long 0x00 10. " EP_ST_ACK ,Endpoint acknowledge status stage of control transfer" "Not acknowledged,Acknowledged"
|
|
bitfld.long 0x00 9. " EP_ST_STALL ,Endpoint stall status stage of control transfer" "Not stalled,Stalled"
|
|
bitfld.long 0x00 8. " EP_STALL ,Endpoint stall" "Not stalled,Stalled"
|
|
bitfld.long 0x00 6. " EP_DT ,Endpoint data toggle clear" "Not cleared,Cleared"
|
|
textline " "
|
|
bitfld.long 0x00 5. " EP_NAK_EN ,Endpoint NAK interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " EP_INT_EN ,Endpoint transfer complete interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " EP_BUF2 ,Endpoint double buffered enable" "Single,Double"
|
|
bitfld.long 0x00 0.--1. " EP_DIR ,Endpoint direction" "Disabled,OUT,IN,"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
tree "SPIX (Serial Peripheral Interface)"
|
|
base ad:0x40004000
|
|
width 18.
|
|
group.long 0x00++0x13
|
|
line.long 0x00 "SPIX_MASTER_CFG,SPIX Master Configuration"
|
|
bitfld.long 0x00 28.--31. " SDIO_SAMPLE_POINT ,SDIO sample point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 24.--27. " ALT_SCK_LO_CLK ,Alt SCK low clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 20.--23. " ALT_SCK_HI_CLK ,Alt SCK high clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 18.--19. " INACT_DELAY ,SS inactive timing (SPIX module clocks)" "0,2,4,8"
|
|
textline " "
|
|
bitfld.long 0x00 16.--17. " ACT_DELAY ,SS active timing (SPIX module clocks)" "0,2,4,8"
|
|
bitfld.long 0x00 12.--15. " SCK_LO_CLK ,SCK low clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 8.--11. " SCK_HI_CLK ,SCK high clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
bitfld.long 0x00 4.--6. " SLAVE_SEL ,SPIX slave select" "SS0,SS1,SS2,?..."
|
|
textline " "
|
|
bitfld.long 0x00 3. " ALT_TIMING_EN ,Alternate timing mode enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " SS_ACT_LO ,SPIX slave select polarity" "High,Low"
|
|
bitfld.long 0x00 0.--1. " SPI_MODE ,SPIX mode" "High,,,Low"
|
|
line.long 0x04 "SPIX_FETCH_CTRL,SPIX Fetch Control"
|
|
bitfld.long 0x04 16. " FOUR_BYTE_ADDR ,Four byte address mode (wide)" "3 bytes,4 bytes"
|
|
bitfld.long 0x04 12.--13. " DATA_WIDTH ,Data width" "1,2,4,"
|
|
bitfld.long 0x04 10.--11. " ADDR_WIDTH ,Address width" "1,2,4,"
|
|
bitfld.long 0x04 8.--9. " CMD_WIDTH ,Command width" "1,2,4,"
|
|
textline " "
|
|
hexmask.long.byte 0x04 0.--7. 1. " CMD_VALUE ,Command value"
|
|
line.long 0x08 "SPIX_MODE_CTRL,SPIX Mode Control"
|
|
bitfld.long 0x08 8. " NO_CMD_MODE ,No command mode" "Not read,Read"
|
|
bitfld.long 0x08 0.--3. " MODE_CLOCKS ,Mode clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
line.long 0x0C "SPIX_MODE_DATA,SPIX Mode Data"
|
|
hexmask.long.word 0x0C 16.--31. 1. " MODE_DATA_OE ,Mode output enable"
|
|
hexmask.long.word 0x0C 0.--15. 1. " MODE_DATA_BITS ,Mode data"
|
|
line.long 0x10 "SPIX_SCK_FB_CTRL,SPIX SCK_FB Control Register"
|
|
bitfld.long 0x10 12.--17. " IGNORE_CLKS_NO_CMD ,Ignore SCK_FB clocks for no command mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x10 4.--9. " IGNORE_CLKS ,Ignore SCK_FB clocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63"
|
|
bitfld.long 0x10 1. " INVERT_SCK_FB_CLK ,Invert SCK_FB clock" "Not inverted,Inverted"
|
|
bitfld.long 0x10 0. " ENABLE_SCK_FB_MODE ,Enable SCK_FB mode" "Disabled,Enabled"
|
|
width 0x0B
|
|
tree.end
|
|
tree "ADC (Analog to Digital Converter)"
|
|
base ad:0x4001F000
|
|
width 17.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "ADC_CTRL,ADC Control"
|
|
hexmask.long.byte 0x00 24.--31. 1. " AFE_PWR_UP_DLY ,Delay from ADC powerup until ADC ready asserted"
|
|
bitfld.long 0x00 17. " ADC_DATAALIGN ,ADC data alignment select" "LSB,MSB"
|
|
bitfld.long 0x00 16. " ADC_XREF ,Enable use of ADC external reference" "Internal,External"
|
|
textline " "
|
|
bitfld.long 0x00 12.--15. " ADC_CHSEL ,ADC channel select" "AIN0,AIN1,AIN2,AIN3,AIN0/5,AIN1/5,VDD33/4,VDD18,VDD12,VRTC/2,?..."
|
|
bitfld.long 0x00 11. " ADC_CLK_EN ,ADC clock enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " ADC_REFSEL ,ADC reference select (internal use only)" "0,1"
|
|
textline " "
|
|
bitfld.long 0x00 9. " ADC_SCALE ,ADC scale" "Not scaled,Scaled"
|
|
bitfld.long 0x00 8. " ADC_REFSCL ,ADC reference scale" "Not scaled,Scaled"
|
|
bitfld.long 0x00 7. " BUF_BYPASS ,Bypass input buffer" "Not bypassed,Bypassed"
|
|
textline " "
|
|
bitfld.long 0x00 6. " BUF_PUMP_DIS ,Disable charge pump out to input buffer (internal use only)" "No,Yes"
|
|
bitfld.long 0x00 5. " BUF_CHOP_DIS ,ADC input buffer chop disable (internal use only)" "No,Yes"
|
|
bitfld.long 0x00 4. " ADC_CHGPUMP_PU ,ADC charge pump power up" "Off,On"
|
|
textline " "
|
|
bitfld.long 0x00 3. " ADC_REFBUF_PU ,ADC reference buffer power up" "Off,On"
|
|
bitfld.long 0x00 2. " BUF_PU ,ADC input buffer power up" "Off,On"
|
|
bitfld.long 0x00 1. " ADC_PU ,ADC power up" "Off,On"
|
|
textline " "
|
|
bitfld.long 0x00 0. " CPU_ADC_START ,Start ADC conversion" "Not started,Started"
|
|
rgroup.long 0x04++0x03
|
|
line.long 0x00 "ADC_STATUS,ADC Status"
|
|
bitfld.long 0x00 3. " ADC_OVERFLOW ,ADC overflow" "Not occurred,Occurred"
|
|
bitfld.long 0x00 2. " AFE_PWR_UP_ACTIVE ,AFE power up delay active" "Not active,Active"
|
|
bitfld.long 0x00 1. " RO_CAL_ATOMIC_ACTIVE ,RO frequency calibration active" "Not active,Active"
|
|
textline " "
|
|
bitfld.long 0x00 0. " ADC_ACTIVE ,ADC conversion in progress" "Idle,Busy"
|
|
if (((per.l(ad:0x4001F000))&0x20000)==0x20000)
|
|
rgroup.long 0x08++0x03
|
|
line.long 0x00 "ADC_DATA,ADC Output Data"
|
|
hexmask.long.word 0x00 6.--15. 1. " ADC_DATA ,ADC converted sample data output"
|
|
else
|
|
rgroup.long 0x08++0x03
|
|
line.long 0x00 "ADC_DATA,ADC Output Data"
|
|
hexmask.long.word 0x00 0.--9. 1. " ADC_DATA ,ADC converted sample data output"
|
|
endif
|
|
group.long 0x0C++0x23
|
|
line.long 0x00 "ADC_INTR,ADC Interrupt Control Register"
|
|
rbitfld.long 0x00 22. " ADC_INT_PENDING ,ADC interrupt pending status" "Not pending,Pending"
|
|
eventfld.long 0x00 21. " RO_CAL_DONE_IF ,RO cal done interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x00 20. " ADC_OVERFLOW_IF ,ADC overflow interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x00 19. " ADC_LO_LIMIT_IF ,ADC lo limit monitor interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x00 18. " ADC_HI_LIMIT_IF ,ADC hi limit monitor interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x00 17. " ADC_REF_READY_IF ,ADC reference ready interrupt flag" "No interrupt,Interrupt"
|
|
textline " "
|
|
eventfld.long 0x00 16. " ADC_DONE_IF ,ADC done interrupt flag" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 5. " RO_CAL_DONE_IE ,RO call done interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " ADC_OVERFLOW_IE ,ADC overflow interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " ADC_LO_LIMIT_IE ,ADC lo limit monitor interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " ADC_HI_LIMIT_IE ,ADC hi limit monitor interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " ADC_REF_READY_IE ,ADC reference ready interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 0. " ADC_DONE_IE ,ADC done interrupt enable" "Disabled,Enabled"
|
|
line.long 0x04 "ADC_LIMIT0,ADC Limit 0"
|
|
bitfld.long 0x04 29. " CH_HI_LIMIT_EN ,High limit monitoring enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 28. " CH_LO_LIMIT_EN ,Low limit monitoring enable" "Disabled,Enabled"
|
|
bitfld.long 0x04 24.--27. " CH_SEL ,ADC channel select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
hexmask.long.word 0x04 12.--21. 1. " CH_HI_LIMIT ,High limit threshold"
|
|
hexmask.long.word 0x04 0.--9. 1. " CH_LO_LIMIT ,Low limit threshold"
|
|
line.long 0x08 "ADC_LIMIT1,ADC Limit 1"
|
|
bitfld.long 0x08 29. " CH_HI_LIMIT_EN ,High limit monitoring enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 28. " CH_LO_LIMIT_EN ,Low limit monitoring enable" "Disabled,Enabled"
|
|
bitfld.long 0x08 24.--27. " CH_SEL ,ADC channel select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
hexmask.long.word 0x08 12.--21. 1. " CH_HI_LIMIT ,High limit threshold"
|
|
hexmask.long.word 0x08 0.--9. 1. " CH_LO_LIMIT ,Low limit threshold"
|
|
line.long 0x0C "ADC_LIMIT2,ADC Limit 2"
|
|
bitfld.long 0x0C 29. " CH_HI_LIMIT_EN ,High limit monitoring enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 28. " CH_LO_LIMIT_EN ,Low limit monitoring enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 24.--27. " CH_SEL ,ADC channel select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
hexmask.long.word 0x0C 12.--21. 1. " CH_HI_LIMIT ,High limit threshold"
|
|
hexmask.long.word 0x0C 0.--9. 1. " CH_LO_LIMIT ,Low limit threshold"
|
|
line.long 0x10 "ADC_LIMIT3,ADC Limit 3"
|
|
bitfld.long 0x10 29. " CH_HI_LIMIT_EN ,High limit monitoring enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 28. " CH_LO_LIMIT_EN ,Low limit monitoring enable" "Disabled,Enabled"
|
|
bitfld.long 0x10 24.--27. " CH_SEL ,ADC channel select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15"
|
|
textline " "
|
|
hexmask.long.word 0x10 12.--21. 1. " CH_HI_LIMIT ,High limit threshold"
|
|
hexmask.long.word 0x10 0.--9. 1. " CH_LO_LIMIT ,Low limit threshold"
|
|
line.long 0x14 "ADC_AFE_CTRL,AFE Control Register"
|
|
bitfld.long 0x14 9. " TMON_EXTBIAS_EN ,Enable external temperature measurement bias generator" "Disabled,Enabled"
|
|
bitfld.long 0x14 8. " TMON_INTBIAS_EN ,Enable internal temperature measurement bias generator" "Disabled,Enabled"
|
|
line.long 0x18 "ADC_RO_CAL0,RO Trim Calibration Register 0"
|
|
hexmask.long.word 0x18 23.--31. 1. " RO_TRM ,RO trim calibration result"
|
|
hexmask.long.word 0x18 8.--19. 1. " TRM_MU ,RO trim adaptation gain"
|
|
bitfld.long 0x18 5.--7. " DUMMY ,Dummy write filed" "0,1,2,3,4,5,6,7"
|
|
textline " "
|
|
bitfld.long 0x18 4. " RO_CAL_ATOMIC ,RO calibration run atomic" "Not started,Started"
|
|
bitfld.long 0x18 2. " RO_CAL_LOAD ,RO calibration load initial value" "Not loading,Loading"
|
|
bitfld.long 0x18 1. " RO_CAL_RUN ,RO calibration run" "Not started,Started"
|
|
textline " "
|
|
bitfld.long 0x18 0. " RO_CAL_EN ,RO calibration enable" "Disabled,Enabled"
|
|
line.long 0x1C "ADC_RO_CAL1,RO Trim Calibration Register 1"
|
|
hexmask.long.word 0x1C 20.--28. 1. " TRM_MAX ,RO trim minimum adaptive limit"
|
|
hexmask.long.word 0x1C 10.--18. 1. " TRM_MIN ,RO trim maximum adaptive limit"
|
|
hexmask.long.word 0x1C 0.--8. 1. " TRM_INIT ,RO trim initial value"
|
|
line.long 0x20 "ADC_RO_CAL2,RO Trim Calibration Register 2"
|
|
hexmask.long.byte 0x20 0.--7. 1. " AUTO_CAL_DONE_CNT ,Auto cal time delay for atomic calibration (in milliseconds)"
|
|
width 0x0B
|
|
tree.end
|
|
tree "PT (Pulse Train)"
|
|
base ad:0x40011000
|
|
width 13.
|
|
group.long 0x00++0x0F
|
|
line.long 0x00 "PTG_ENABLE,Global Enable/Disable Controls for All Pulse Trains"
|
|
bitfld.long 0x00 15. " PT15 ,Enable control for PT15" "Disabled,Enabled"
|
|
bitfld.long 0x00 14. " PT14 ,Enable control for PT14" "Disabled,Enabled"
|
|
bitfld.long 0x00 13. " PT13 ,Enable control for PT13" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " PT12 ,Enable control for PT12" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 11. " PT11 ,Enable control for PT11" "Disabled,Enabled"
|
|
bitfld.long 0x00 10. " PT10 ,Enable control for PT10" "Disabled,Enabled"
|
|
bitfld.long 0x00 9. " PT9 ,Enable control for PT9" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " PT8 ,Enable control for PT8" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 7. " PT7 ,Enable control for PT7" "Disabled,Enabled"
|
|
bitfld.long 0x00 6. " PT6 ,Enable control for PT6" "Disabled,Enabled"
|
|
bitfld.long 0x00 5. " PT5 ,Enable control for PT5" "Disabled,Enabled"
|
|
bitfld.long 0x00 4. " PT4 ,Enable control for PT4" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 3. " PT3 ,Enable control for PT3" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PT2 ,Enable control for PT2" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " PT1 ,Enable control for PT1" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " PT0 ,Enable control for PT0" "Disabled,Enabled"
|
|
line.long 0x04 "PTG_RESYNC,Global Resync (All Pulse Trains) Control"
|
|
bitfld.long 0x04 15. " PT15 ,Resync control for PT15" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 14. " PT14 ,Resync control for PT14" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 13. " PT13 ,Resync control for PT13" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 12. " PT12 ,Resync control for PT12" "Not re-enabled,Re-enabled"
|
|
textline " "
|
|
bitfld.long 0x04 11. " PT11 ,Resync control for PT11" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 10. " PT10 ,Resync control for PT10" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 9. " PT9 ,Resync control for PT9" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 8. " PT8 ,Resync control for PT8" "Not re-enabled,Re-enabled"
|
|
textline " "
|
|
bitfld.long 0x04 7. " PT7 ,Resync control for PT7" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 6. " PT6 ,Resync control for PT6" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 5. " PT5 ,Resync control for PT5" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 4. " PT4 ,Resync control for PT4" "Not re-enabled,Re-enabled"
|
|
textline " "
|
|
bitfld.long 0x04 3. " PT3 ,Resync control for PT3" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 2. " PT2 ,Resync control for PT2" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 1. " PT1 ,Resync control for PT1" "Not re-enabled,Re-enabled"
|
|
bitfld.long 0x04 0. " PT0 ,Resync control for PT0" "Not re-enabled,Re-enabled"
|
|
line.long 0x08 "PTG_INTFL,Pulse Train Interrupt Flags"
|
|
bitfld.long 0x08 15. " PT15 ,Pulse train 15 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 14. " PT14 ,Pulse train 14 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 13. " PT13 ,Pulse train 13 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 12. " PT12 ,Pulse train 12 stopped interrupt flag" "Not stopped,Stopped"
|
|
textline " "
|
|
bitfld.long 0x08 11. " PT11 ,Pulse train 11 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 10. " PT10 ,Pulse train 10 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 9. " PT9 ,Pulse train 9 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 8. " PT8 ,Pulse train 8 stopped interrupt flag" "Not stopped,Stopped"
|
|
textline " "
|
|
bitfld.long 0x08 7. " PT7 ,Pulse train 7 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 6. " PT6 ,Pulse train 6 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 5. " PT5 ,Pulse train 5 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 4. " PT4 ,Pulse train 4 stopped interrupt flag" "Not stopped,Stopped"
|
|
textline " "
|
|
bitfld.long 0x08 3. " PT3 ,Pulse train 3 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 2. " PT2 ,Pulse train 2 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 1. " PT1 ,Pulse train 1 stopped interrupt flag" "Not stopped,Stopped"
|
|
bitfld.long 0x08 0. " PT0 ,Pulse train 0 stopped interrupt flag" "Not stopped,Stopped"
|
|
line.long 0x0C "PTG_INTEN,Pulse Train Interrupt Enable/Disable"
|
|
bitfld.long 0x0C 15. " PT15 ,Pulse train 15 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 14. " PT14 ,Pulse train 14 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 13. " PT13 ,Pulse train 13 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 12. " PT12 ,Pulse train 12 stopped interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 11. " PT11 ,Pulse train 11 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 10. " PT10 ,Pulse train 10 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 9. " PT9 ,Pulse train 9 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 8. " PT8 ,Pulse train 8 stopped interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 7. " PT7 ,Pulse train 7 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 6. " PT6 ,Pulse train 6 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 5. " PT5 ,Pulse train 5 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 4. " PT4 ,Pulse train 4 stopped interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x0C 3. " PT3 ,Pulse train 3 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 2. " PT2 ,Pulse train 2 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 1. " PT1 ,Pulse train 1 stopped interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x0C 0. " PT0 ,Pulse train 0 stopped interrupt enable" "Disabled,Enabled"
|
|
textline " "
|
|
width 18.
|
|
tree "Pulse Train 0"
|
|
group.long 0x20++0x0F
|
|
line.long 0x00 "PT0_RATE_LENGTH,PT0 Pulse Train 0 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x20))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x20+0x04)++0x03
|
|
hide.long 0x00 "PT0_TRAIN,Pulse Train 0 Output Pattern"
|
|
else
|
|
group.long (0x20+0x04)++0x03
|
|
line.long 0x00 "PT0_TRAIN,Pulse Train 0 Output Pattern"
|
|
endif
|
|
group.long (0x20+0x08)++0x07
|
|
line.long 0x00 "PT0_LOOP,Pulse Train 0 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT0_RESTART,Pulse Train 0 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 1"
|
|
group.long 0x40++0x0F
|
|
line.long 0x00 "PT1_RATE_LENGTH,PT1 Pulse Train 1 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x40))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x40+0x04)++0x03
|
|
hide.long 0x00 "PT1_TRAIN,Pulse Train 1 Output Pattern"
|
|
else
|
|
group.long (0x40+0x04)++0x03
|
|
line.long 0x00 "PT1_TRAIN,Pulse Train 1 Output Pattern"
|
|
endif
|
|
group.long (0x40+0x08)++0x07
|
|
line.long 0x00 "PT1_LOOP,Pulse Train 1 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT1_RESTART,Pulse Train 1 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 2"
|
|
group.long 0x60++0x0F
|
|
line.long 0x00 "PT2_RATE_LENGTH,PT2 Pulse Train 2 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x60))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x60+0x04)++0x03
|
|
hide.long 0x00 "PT2_TRAIN,Pulse Train 2 Output Pattern"
|
|
else
|
|
group.long (0x60+0x04)++0x03
|
|
line.long 0x00 "PT2_TRAIN,Pulse Train 2 Output Pattern"
|
|
endif
|
|
group.long (0x60+0x08)++0x07
|
|
line.long 0x00 "PT2_LOOP,Pulse Train 2 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT2_RESTART,Pulse Train 2 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 3"
|
|
group.long 0x80++0x0F
|
|
line.long 0x00 "PT3_RATE_LENGTH,PT3 Pulse Train 3 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x80))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x80+0x04)++0x03
|
|
hide.long 0x00 "PT3_TRAIN,Pulse Train 3 Output Pattern"
|
|
else
|
|
group.long (0x80+0x04)++0x03
|
|
line.long 0x00 "PT3_TRAIN,Pulse Train 3 Output Pattern"
|
|
endif
|
|
group.long (0x80+0x08)++0x07
|
|
line.long 0x00 "PT3_LOOP,Pulse Train 3 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT3_RESTART,Pulse Train 3 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 4"
|
|
group.long 0xA0++0x0F
|
|
line.long 0x00 "PT4_RATE_LENGTH,PT4 Pulse Train 4 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0xA0))&0xF8000000)==0x08000000)
|
|
hgroup.long (0xA0+0x04)++0x03
|
|
hide.long 0x00 "PT4_TRAIN,Pulse Train 4 Output Pattern"
|
|
else
|
|
group.long (0xA0+0x04)++0x03
|
|
line.long 0x00 "PT4_TRAIN,Pulse Train 4 Output Pattern"
|
|
endif
|
|
group.long (0xA0+0x08)++0x07
|
|
line.long 0x00 "PT4_LOOP,Pulse Train 4 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT4_RESTART,Pulse Train 4 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 5"
|
|
group.long 0xC0++0x0F
|
|
line.long 0x00 "PT5_RATE_LENGTH,PT5 Pulse Train 5 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0xC0))&0xF8000000)==0x08000000)
|
|
hgroup.long (0xC0+0x04)++0x03
|
|
hide.long 0x00 "PT5_TRAIN,Pulse Train 5 Output Pattern"
|
|
else
|
|
group.long (0xC0+0x04)++0x03
|
|
line.long 0x00 "PT5_TRAIN,Pulse Train 5 Output Pattern"
|
|
endif
|
|
group.long (0xC0+0x08)++0x07
|
|
line.long 0x00 "PT5_LOOP,Pulse Train 5 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT5_RESTART,Pulse Train 5 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 6"
|
|
group.long 0xE0++0x0F
|
|
line.long 0x00 "PT6_RATE_LENGTH,PT6 Pulse Train 6 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0xE0))&0xF8000000)==0x08000000)
|
|
hgroup.long (0xE0+0x04)++0x03
|
|
hide.long 0x00 "PT6_TRAIN,Pulse Train 6 Output Pattern"
|
|
else
|
|
group.long (0xE0+0x04)++0x03
|
|
line.long 0x00 "PT6_TRAIN,Pulse Train 6 Output Pattern"
|
|
endif
|
|
group.long (0xE0+0x08)++0x07
|
|
line.long 0x00 "PT6_LOOP,Pulse Train 6 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT6_RESTART,Pulse Train 6 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 7"
|
|
group.long 0x100++0x0F
|
|
line.long 0x00 "PT7_RATE_LENGTH,PT7 Pulse Train 7 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x100))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x100+0x04)++0x03
|
|
hide.long 0x00 "PT7_TRAIN,Pulse Train 7 Output Pattern"
|
|
else
|
|
group.long (0x100+0x04)++0x03
|
|
line.long 0x00 "PT7_TRAIN,Pulse Train 7 Output Pattern"
|
|
endif
|
|
group.long (0x100+0x08)++0x07
|
|
line.long 0x00 "PT7_LOOP,Pulse Train 7 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT7_RESTART,Pulse Train 7 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 8"
|
|
group.long 0x120++0x0F
|
|
line.long 0x00 "PT8_RATE_LENGTH,PT8 Pulse Train 8 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x120))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x120+0x04)++0x03
|
|
hide.long 0x00 "PT8_TRAIN,Pulse Train 8 Output Pattern"
|
|
else
|
|
group.long (0x120+0x04)++0x03
|
|
line.long 0x00 "PT8_TRAIN,Pulse Train 8 Output Pattern"
|
|
endif
|
|
group.long (0x120+0x08)++0x07
|
|
line.long 0x00 "PT8_LOOP,Pulse Train 8 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT8_RESTART,Pulse Train 8 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 9"
|
|
group.long 0x140++0x0F
|
|
line.long 0x00 "PT9_RATE_LENGTH,PT9 Pulse Train 9 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x140))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x140+0x04)++0x03
|
|
hide.long 0x00 "PT9_TRAIN,Pulse Train 9 Output Pattern"
|
|
else
|
|
group.long (0x140+0x04)++0x03
|
|
line.long 0x00 "PT9_TRAIN,Pulse Train 9 Output Pattern"
|
|
endif
|
|
group.long (0x140+0x08)++0x07
|
|
line.long 0x00 "PT9_LOOP,Pulse Train 9 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT9_RESTART,Pulse Train 9 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 10"
|
|
group.long 0x160++0x0F
|
|
line.long 0x00 "PT10_RATE_LENGTH,PT10 Pulse Train 10 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x160))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x160+0x04)++0x03
|
|
hide.long 0x00 "PT10_TRAIN,Pulse Train 10 Output Pattern"
|
|
else
|
|
group.long (0x160+0x04)++0x03
|
|
line.long 0x00 "PT10_TRAIN,Pulse Train 10 Output Pattern"
|
|
endif
|
|
group.long (0x160+0x08)++0x07
|
|
line.long 0x00 "PT10_LOOP,Pulse Train 10 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT10_RESTART,Pulse Train 10 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 11"
|
|
group.long 0x180++0x0F
|
|
line.long 0x00 "PT11_RATE_LENGTH,PT11 Pulse Train 11 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x180))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x180+0x04)++0x03
|
|
hide.long 0x00 "PT11_TRAIN,Pulse Train 11 Output Pattern"
|
|
else
|
|
group.long (0x180+0x04)++0x03
|
|
line.long 0x00 "PT11_TRAIN,Pulse Train 11 Output Pattern"
|
|
endif
|
|
group.long (0x180+0x08)++0x07
|
|
line.long 0x00 "PT11_LOOP,Pulse Train 11 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT11_RESTART,Pulse Train 11 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 12"
|
|
group.long 0x1A0++0x0F
|
|
line.long 0x00 "PT12_RATE_LENGTH,PT12 Pulse Train 12 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x1A0))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x1A0+0x04)++0x03
|
|
hide.long 0x00 "PT12_TRAIN,Pulse Train 12 Output Pattern"
|
|
else
|
|
group.long (0x1A0+0x04)++0x03
|
|
line.long 0x00 "PT12_TRAIN,Pulse Train 12 Output Pattern"
|
|
endif
|
|
group.long (0x1A0+0x08)++0x07
|
|
line.long 0x00 "PT12_LOOP,Pulse Train 12 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT12_RESTART,Pulse Train 12 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 13"
|
|
group.long 0x1C0++0x0F
|
|
line.long 0x00 "PT13_RATE_LENGTH,PT13 Pulse Train 13 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x1C0))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x1C0+0x04)++0x03
|
|
hide.long 0x00 "PT13_TRAIN,Pulse Train 13 Output Pattern"
|
|
else
|
|
group.long (0x1C0+0x04)++0x03
|
|
line.long 0x00 "PT13_TRAIN,Pulse Train 13 Output Pattern"
|
|
endif
|
|
group.long (0x1C0+0x08)++0x07
|
|
line.long 0x00 "PT13_LOOP,Pulse Train 13 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT13_RESTART,Pulse Train 13 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 14"
|
|
group.long 0x1E0++0x0F
|
|
line.long 0x00 "PT14_RATE_LENGTH,PT14 Pulse Train 14 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x1E0))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x1E0+0x04)++0x03
|
|
hide.long 0x00 "PT14_TRAIN,Pulse Train 14 Output Pattern"
|
|
else
|
|
group.long (0x1E0+0x04)++0x03
|
|
line.long 0x00 "PT14_TRAIN,Pulse Train 14 Output Pattern"
|
|
endif
|
|
group.long (0x1E0+0x08)++0x07
|
|
line.long 0x00 "PT14_LOOP,Pulse Train 14 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT14_RESTART,Pulse Train 14 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
tree "Pulse Train 15"
|
|
group.long 0x200++0x0F
|
|
line.long 0x00 "PT15_RATE_LENGTH,PT15 Pulse Train 15 Configuration"
|
|
bitfld.long 0x00 27.--31. " MODE ,Pulse train output mode/train length" "32 bits,Square wave,2 bits,3 bits,4 bits,5 bits,6 bits,7 bits,8 bits,9 bits,10 bits,11 bits,12 bits,13 bits,14 bits,15 bits,16 bits,17 bits,18 bits,19 bits,20 bits,21 bits,22 bits,23 bits,24 bits,25 bits,26 bits,27 bits,28 bits,29 bits,30 bits,31 bits"
|
|
hexmask.long 0x00 0.--26. 1. " RATE_CONTROL ,Pulse train enable/rate control"
|
|
if (((per.l(ad:0x40011000+0x200))&0xF8000000)==0x08000000)
|
|
hgroup.long (0x200+0x04)++0x03
|
|
hide.long 0x00 "PT15_TRAIN,Pulse Train 15 Output Pattern"
|
|
else
|
|
group.long (0x200+0x04)++0x03
|
|
line.long 0x00 "PT15_TRAIN,Pulse Train 15 Output Pattern"
|
|
endif
|
|
group.long (0x200+0x08)++0x07
|
|
line.long 0x00 "PT15_LOOP,Pulse Train 15 Loop Count"
|
|
hexmask.long.word 0x00 16.--27. 1. " RATE_CONTROL ,Pulse train delay between loop iterations"
|
|
hexmask.long.word 0x00 0.--15. 1. " COUNT ,Pulse train loop count"
|
|
line.long 0x04 "PT15_RESTART,Pulse Train 15 Auto-Restart Configuration"
|
|
bitfld.long 0x04 15. " ON_PT_Y_LOOP_EXIT ,Enable auto-restart on PT Y loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 8.--12. " PT_Y_SELECT ,Auto-restart PT Y select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
bitfld.long 0x04 7. " ON_PT_X_LOOP_EXIT ,Enable auto-restart on PT X loop exit" "Disabled,Enabled"
|
|
bitfld.long 0x04 0.--4. " PT_X_SELECT ,Auto-restart PT X select" "PT0,PT1,PT2,PT3,PT4,PT5,PT6,PT7,PT8,PT9,PT10,PT11,PT12,PT13,PT14,PT15,?..."
|
|
tree.end
|
|
width 0x0B
|
|
tree.end
|
|
tree "TMR (Timer/Counters)"
|
|
tree "Timer 0"
|
|
base ad:0x4000B000
|
|
width 19.
|
|
if (((per.l(ad:0x4000B000))&0x08)==0x00)
|
|
if (((per.l(ad:0x4000B000))&0x07)>=0x02)
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR0_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " POLARITY ,Timer I/O polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR0_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
endif
|
|
group.long 0x04++0x0B
|
|
line.long 0x00 "TMR0_COUNT32,Timer [32 bit] Current Count Value"
|
|
line.long 0x04 "TMR0_TERM_CNT32,Timer [32 bit] Terminal Count Setting"
|
|
line.long 0x08 "TMR0_PWM_CAP32,Timer [32 bit] PWM Compare Setting or Capture/Measure Value"
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "TMR0_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x00 0. " TIMER0 ,Interrupt flag for 32-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x04 "TMR0_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x04 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR0_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 13. " ENABLE1 ,Enable 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 16-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
sif (cpuis("MAX3260*"))
|
|
bitfld.long 0x00 1. " MODE1 ,Operating modes for 16-bit timer 1" "One Shot Mode,Continuous Mode"
|
|
bitfld.long 0x00 0. " MODE0 ,Operating modes for 16-bit timer 0" "One Shot Mode,Continuous Mode"
|
|
else
|
|
bitfld.long 0x00 0.--1. " MODE ,Operating modes for 16-bit timer" "One Shot Mode,Continuous Mode,One Shot Mode,Continuous Mode"
|
|
endif
|
|
group.long 0x10++0x17
|
|
line.long 0x00 "TMR0_COUNT16_0,[16 bit] Current Count Value, 16-bit Timer 0"
|
|
hexmask.long.word 0x00 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x04 "TMR0_TERM_CNT16_0,[16 bit] Terminal Count Setting, 16-bit Timer 0"
|
|
hexmask.long.word 0x04 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x08 "TMR0_COUNT16_1,[16 bit] Current Count Value, 16-bit Timer 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x0C "TMR0_TERM_CNT16_1,[16 bit] Terminal Count Setting, 16-bit Timer 1"
|
|
hexmask.long.word 0x0C 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x10 "TMR0_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x10 1. " TIMER1 ,Interrupt flag for 16-bit timer 1" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 0. " TIMER0 ,Interrupt flag for 16-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x14 "TMR0_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x14 1. " TIMER1 ,Interrupt enable for 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x14 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
tree "Timer 1"
|
|
base ad:0x4000C000
|
|
width 19.
|
|
if (((per.l(ad:0x4000C000))&0x08)==0x00)
|
|
if (((per.l(ad:0x4000C000))&0x07)>=0x02)
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR1_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " POLARITY ,Timer I/O polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR1_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
endif
|
|
group.long 0x04++0x0B
|
|
line.long 0x00 "TMR1_COUNT32,Timer [32 bit] Current Count Value"
|
|
line.long 0x04 "TMR1_TERM_CNT32,Timer [32 bit] Terminal Count Setting"
|
|
line.long 0x08 "TMR1_PWM_CAP32,Timer [32 bit] PWM Compare Setting or Capture/Measure Value"
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "TMR1_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x00 0. " TIMER0 ,Interrupt flag for 32-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x04 "TMR1_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x04 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR1_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 13. " ENABLE1 ,Enable 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 16-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
sif (cpuis("MAX3260*"))
|
|
bitfld.long 0x00 1. " MODE1 ,Operating modes for 16-bit timer 1" "One Shot Mode,Continuous Mode"
|
|
bitfld.long 0x00 0. " MODE0 ,Operating modes for 16-bit timer 0" "One Shot Mode,Continuous Mode"
|
|
else
|
|
bitfld.long 0x00 0.--1. " MODE ,Operating modes for 16-bit timer" "One Shot Mode,Continuous Mode,One Shot Mode,Continuous Mode"
|
|
endif
|
|
group.long 0x10++0x17
|
|
line.long 0x00 "TMR1_COUNT16_0,[16 bit] Current Count Value, 16-bit Timer 0"
|
|
hexmask.long.word 0x00 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x04 "TMR1_TERM_CNT16_0,[16 bit] Terminal Count Setting, 16-bit Timer 0"
|
|
hexmask.long.word 0x04 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x08 "TMR1_COUNT16_1,[16 bit] Current Count Value, 16-bit Timer 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x0C "TMR1_TERM_CNT16_1,[16 bit] Terminal Count Setting, 16-bit Timer 1"
|
|
hexmask.long.word 0x0C 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x10 "TMR1_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x10 1. " TIMER1 ,Interrupt flag for 16-bit timer 1" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 0. " TIMER0 ,Interrupt flag for 16-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x14 "TMR1_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x14 1. " TIMER1 ,Interrupt enable for 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x14 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
tree "Timer 2"
|
|
base ad:0x4000D000
|
|
width 19.
|
|
if (((per.l(ad:0x4000D000))&0x08)==0x00)
|
|
if (((per.l(ad:0x4000D000))&0x07)>=0x02)
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR2_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " POLARITY ,Timer I/O polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR2_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
endif
|
|
group.long 0x04++0x0B
|
|
line.long 0x00 "TMR2_COUNT32,Timer [32 bit] Current Count Value"
|
|
line.long 0x04 "TMR2_TERM_CNT32,Timer [32 bit] Terminal Count Setting"
|
|
line.long 0x08 "TMR2_PWM_CAP32,Timer [32 bit] PWM Compare Setting or Capture/Measure Value"
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "TMR2_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x00 0. " TIMER0 ,Interrupt flag for 32-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x04 "TMR2_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x04 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR2_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 13. " ENABLE1 ,Enable 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 16-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
sif (cpuis("MAX3260*"))
|
|
bitfld.long 0x00 1. " MODE1 ,Operating modes for 16-bit timer 1" "One Shot Mode,Continuous Mode"
|
|
bitfld.long 0x00 0. " MODE0 ,Operating modes for 16-bit timer 0" "One Shot Mode,Continuous Mode"
|
|
else
|
|
bitfld.long 0x00 0.--1. " MODE ,Operating modes for 16-bit timer" "One Shot Mode,Continuous Mode,One Shot Mode,Continuous Mode"
|
|
endif
|
|
group.long 0x10++0x17
|
|
line.long 0x00 "TMR2_COUNT16_0,[16 bit] Current Count Value, 16-bit Timer 0"
|
|
hexmask.long.word 0x00 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x04 "TMR2_TERM_CNT16_0,[16 bit] Terminal Count Setting, 16-bit Timer 0"
|
|
hexmask.long.word 0x04 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x08 "TMR2_COUNT16_1,[16 bit] Current Count Value, 16-bit Timer 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x0C "TMR2_TERM_CNT16_1,[16 bit] Terminal Count Setting, 16-bit Timer 1"
|
|
hexmask.long.word 0x0C 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x10 "TMR2_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x10 1. " TIMER1 ,Interrupt flag for 16-bit timer 1" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 0. " TIMER0 ,Interrupt flag for 16-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x14 "TMR2_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x14 1. " TIMER1 ,Interrupt enable for 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x14 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
tree "Timer 3"
|
|
base ad:0x4000E000
|
|
width 19.
|
|
if (((per.l(ad:0x4000E000))&0x08)==0x00)
|
|
if (((per.l(ad:0x4000E000))&0x07)>=0x02)
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR3_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " POLARITY ,Timer I/O polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR3_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
endif
|
|
group.long 0x04++0x0B
|
|
line.long 0x00 "TMR3_COUNT32,Timer [32 bit] Current Count Value"
|
|
line.long 0x04 "TMR3_TERM_CNT32,Timer [32 bit] Terminal Count Setting"
|
|
line.long 0x08 "TMR3_PWM_CAP32,Timer [32 bit] PWM Compare Setting or Capture/Measure Value"
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "TMR3_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x00 0. " TIMER0 ,Interrupt flag for 32-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x04 "TMR3_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x04 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR3_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 13. " ENABLE1 ,Enable 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 16-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
sif (cpuis("MAX3260*"))
|
|
bitfld.long 0x00 1. " MODE1 ,Operating modes for 16-bit timer 1" "One Shot Mode,Continuous Mode"
|
|
bitfld.long 0x00 0. " MODE0 ,Operating modes for 16-bit timer 0" "One Shot Mode,Continuous Mode"
|
|
else
|
|
bitfld.long 0x00 0.--1. " MODE ,Operating modes for 16-bit timer" "One Shot Mode,Continuous Mode,One Shot Mode,Continuous Mode"
|
|
endif
|
|
group.long 0x10++0x17
|
|
line.long 0x00 "TMR3_COUNT16_0,[16 bit] Current Count Value, 16-bit Timer 0"
|
|
hexmask.long.word 0x00 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x04 "TMR3_TERM_CNT16_0,[16 bit] Terminal Count Setting, 16-bit Timer 0"
|
|
hexmask.long.word 0x04 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x08 "TMR3_COUNT16_1,[16 bit] Current Count Value, 16-bit Timer 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x0C "TMR3_TERM_CNT16_1,[16 bit] Terminal Count Setting, 16-bit Timer 1"
|
|
hexmask.long.word 0x0C 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x10 "TMR3_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x10 1. " TIMER1 ,Interrupt flag for 16-bit timer 1" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 0. " TIMER0 ,Interrupt flag for 16-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x14 "TMR3_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x14 1. " TIMER1 ,Interrupt enable for 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x14 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
tree "Timer 4"
|
|
base ad:0x4000F000
|
|
width 19.
|
|
if (((per.l(ad:0x4000F000))&0x08)==0x00)
|
|
if (((per.l(ad:0x4000F000))&0x07)>=0x02)
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR4_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " POLARITY ,Timer I/O polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR4_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
endif
|
|
group.long 0x04++0x0B
|
|
line.long 0x00 "TMR4_COUNT32,Timer [32 bit] Current Count Value"
|
|
line.long 0x04 "TMR4_TERM_CNT32,Timer [32 bit] Terminal Count Setting"
|
|
line.long 0x08 "TMR4_PWM_CAP32,Timer [32 bit] PWM Compare Setting or Capture/Measure Value"
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "TMR4_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x00 0. " TIMER0 ,Interrupt flag for 32-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x04 "TMR4_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x04 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR4_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 13. " ENABLE1 ,Enable 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 16-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
sif (cpuis("MAX3260*"))
|
|
bitfld.long 0x00 1. " MODE1 ,Operating modes for 16-bit timer 1" "One Shot Mode,Continuous Mode"
|
|
bitfld.long 0x00 0. " MODE0 ,Operating modes for 16-bit timer 0" "One Shot Mode,Continuous Mode"
|
|
else
|
|
bitfld.long 0x00 0.--1. " MODE ,Operating modes for 16-bit timer" "One Shot Mode,Continuous Mode,One Shot Mode,Continuous Mode"
|
|
endif
|
|
group.long 0x10++0x17
|
|
line.long 0x00 "TMR4_COUNT16_0,[16 bit] Current Count Value, 16-bit Timer 0"
|
|
hexmask.long.word 0x00 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x04 "TMR4_TERM_CNT16_0,[16 bit] Terminal Count Setting, 16-bit Timer 0"
|
|
hexmask.long.word 0x04 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x08 "TMR4_COUNT16_1,[16 bit] Current Count Value, 16-bit Timer 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x0C "TMR4_TERM_CNT16_1,[16 bit] Terminal Count Setting, 16-bit Timer 1"
|
|
hexmask.long.word 0x0C 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x10 "TMR4_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x10 1. " TIMER1 ,Interrupt flag for 16-bit timer 1" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 0. " TIMER0 ,Interrupt flag for 16-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x14 "TMR4_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x14 1. " TIMER1 ,Interrupt enable for 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x14 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
tree "Timer 5"
|
|
base ad:0x40010000
|
|
width 19.
|
|
if (((per.l(ad:0x40010000))&0x08)==0x00)
|
|
if (((per.l(ad:0x40010000))&0x07)>=0x02)
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR5_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 8. " POLARITY ,Timer I/O polarity" "Normal,Inverted"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR5_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 32-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
bitfld.long 0x00 0.--2. " MODE ,Operating modes for 32-bit timer" "One Shot Mode,Continuous Mode,Counter Mode,PWM Mode,Capture Mode,Compare Mode,Gated Mode,Measurement Mode"
|
|
endif
|
|
group.long 0x04++0x0B
|
|
line.long 0x00 "TMR5_COUNT32,Timer [32 bit] Current Count Value"
|
|
line.long 0x04 "TMR5_TERM_CNT32,Timer [32 bit] Terminal Count Setting"
|
|
line.long 0x08 "TMR5_PWM_CAP32,Timer [32 bit] PWM Compare Setting or Capture/Measure Value"
|
|
group.long 0x20++0x07
|
|
line.long 0x00 "TMR5_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x00 0. " TIMER0 ,Interrupt flag for 32-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x04 "TMR5_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x04 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
else
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "TMR5_CTRL,Timer Control Register"
|
|
bitfld.long 0x00 13. " ENABLE1 ,Enable 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x00 12. " ENABLE0 ,Enable 16-bit timer 0" "Disabled,Enabled"
|
|
bitfld.long 0x00 4.--7. " PRESCALE ,Timer clock prescale setting" "/1,/2,/4,/8,/16,/32,/64,/128,/256,/512,/1024,/2048,/4096,?..."
|
|
bitfld.long 0x00 3. " TMR2X16 ,Dual 16-bit timer mode" "Single 32-bit,Dual 16-bit"
|
|
textline " "
|
|
sif (cpuis("MAX3260*"))
|
|
bitfld.long 0x00 1. " MODE1 ,Operating modes for 16-bit timer 1" "One Shot Mode,Continuous Mode"
|
|
bitfld.long 0x00 0. " MODE0 ,Operating modes for 16-bit timer 0" "One Shot Mode,Continuous Mode"
|
|
else
|
|
bitfld.long 0x00 0.--1. " MODE ,Operating modes for 16-bit timer" "One Shot Mode,Continuous Mode,One Shot Mode,Continuous Mode"
|
|
endif
|
|
group.long 0x10++0x17
|
|
line.long 0x00 "TMR5_COUNT16_0,[16 bit] Current Count Value, 16-bit Timer 0"
|
|
hexmask.long.word 0x00 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x04 "TMR5_TERM_CNT16_0,[16 bit] Terminal Count Setting, 16-bit Timer 0"
|
|
hexmask.long.word 0x04 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x08 "TMR5_COUNT16_1,[16 bit] Current Count Value, 16-bit Timer 1"
|
|
hexmask.long.word 0x08 0.--15. 1. " VALUE ,Count value"
|
|
line.long 0x0C "TMR5_TERM_CNT16_1,[16 bit] Terminal Count Setting, 16-bit Timer 1"
|
|
hexmask.long.word 0x0C 0.--15. 1. " TERM_COUNT ,Terminal count setting"
|
|
line.long 0x10 "TMR5_INTFL,Timer Module Interrupt Flags"
|
|
eventfld.long 0x10 1. " TIMER1 ,Interrupt flag for 16-bit timer 1" "No interrupt,Interrupt"
|
|
eventfld.long 0x10 0. " TIMER0 ,Interrupt flag for 16-bit timer 0" "No interrupt,Interrupt"
|
|
line.long 0x14 "TMR5_INTEN,Timer Module Interrupt Enable/Disable Settings"
|
|
bitfld.long 0x14 1. " TIMER1 ,Interrupt enable for 16-bit timer 1" "Disabled,Enabled"
|
|
bitfld.long 0x14 0. " TIMER0 ,Interrupt enable for 32-bit timer 0" "Disabled,Enabled"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
tree.end
|
|
tree "RTCTMR (Real Time Clock Timer)"
|
|
base ad:0x40000A00
|
|
width 22.
|
|
group.long 0x00++0x17
|
|
line.long 0x00 "RTCTMR_CTRL,RTC Timer Control"
|
|
sif (!cpuis("MAX3260*"))
|
|
rbitfld.long 0x00 30. " ACTIVE_TRANS_0 ,Active trans 0" "Not pending,Pending"
|
|
rbitfld.long 0x00 29. " TRIM_CLR_ACTIVE ,Trim clr active" "Not pending,Pending"
|
|
rbitfld.long 0x00 28. " TRIM_SLOWER_ACTIVE ,Trim slower active" "Not pending,Pending"
|
|
textline " "
|
|
rbitfld.long 0x00 27. " TRIM_ENABLE_ACTIVE ,Trim enable active" "Not pending,Pending"
|
|
textline " "
|
|
endif
|
|
rbitfld.long 0x00 26. " CMPR0_CLR_ACTIVE ,Cmpr0 clr active" "Not pending,Pending"
|
|
rbitfld.long 0x00 25. " CMPR1_CLR_ACTIVE ,Cmpr1 clr active" "Not pending,Pending"
|
|
textline " "
|
|
rbitfld.long 0x00 24. " PRESCALE_UPDATE_ACTIVE ,Prescale update active" "Not pending,Pending"
|
|
rbitfld.long 0x00 23. " PRESCALE_CMPR0_ACTIVE ,Prescale cmpr0 active" "Not pending,Pending"
|
|
rbitfld.long 0x00 22. " ROLLOVER_CLR_ACTIVE ,Rollover clr active" "Not pending,Pending"
|
|
textline " "
|
|
rbitfld.long 0x00 21. " RTC_CLR_ACTIVE ,Timer clr active" "Not pending,Pending"
|
|
rbitfld.long 0x00 20. " RTC_SET_ACTIVE ,Timer set active" "Not pending,Pending"
|
|
rbitfld.long 0x00 19. " OSC_FRCE_ST_ACTIVE ,Osc frce st active" "Not pending,Pending"
|
|
textline " "
|
|
rbitfld.long 0x00 18. " OSC_FRCE_SM_EN_ACTIVE ,Osc frce sm en active" "Not pending,Pending"
|
|
rbitfld.long 0x00 17. " OSC_GOTO_LOW_ACTIVE ,Osc goto low active" "Not pending,Pending"
|
|
rbitfld.long 0x00 16. " RTC_ENABLE_ACTIVE ,Timer enable active" "Not pending,Pending"
|
|
textline " "
|
|
sif (!cpuis("MAX3260*"))
|
|
bitfld.long 0x00 6.--7. " SNOOZE_ENABLE ,Snooze enable" "Disabled,Mode A,Mode B,"
|
|
bitfld.long 0x00 5. " AUTO_UPDATE_DISABLE ,Auto update disable" "No,Yes"
|
|
textline " "
|
|
endif
|
|
bitfld.long 0x00 4. " AGGRESSIVE_RST ,Use aggressive reset mode" "Not used,Used"
|
|
bitfld.long 0x00 3. " USE_ASYNC_FLAGS ,Use async RTC flags" "Not used,Used"
|
|
rbitfld.long 0x00 2. " PENDING ,RTC transaction pending" "Not pending,Pending"
|
|
textline " "
|
|
bitfld.long 0x00 1. " CLEAR ,RTC timer clear bit" "No effect,Clear"
|
|
bitfld.long 0x00 0. " ENABLE ,RTC timer enable" "Disabled,Enabled"
|
|
line.long 0x04 "RTCTMR_TIMER,RTC Timer Count Value"
|
|
line.long 0x08 "RTCTMR_COMP0,RTC Time of Day Alarm 0 Compare Register"
|
|
line.long 0x10 "RTCTMR_COMP1,RTC Time of Day Alarm 1 Compare Register"
|
|
line.long 0x14 "RTCTMR_FLAGS,CPU Interrupt and RTC Domain Flags"
|
|
bitfld.long 0x14 31. " ASYNC_CLR_FLAGS ,Asynchronus RTC flag clear" "No effect,CLear"
|
|
sif (!cpuis("MAX3260*"))
|
|
bitfld.long 0x14 29. " SNOOZE_B ,Activate RTC snooze alarm mode B" "No effect,Activate"
|
|
bitfld.long 0x14 28. " SNOOZE_A ,Activate RTC snooze alarm mode A" "No effect,Activate"
|
|
endif
|
|
textline " "
|
|
rbitfld.long 0x14 12. " TRIM_FLAG_A ,RTC trim event 4kHz flag" "Not detected,Detected"
|
|
rbitfld.long 0x14 11. " OVERFLOW_FLAG_A ,RTC overflow 4kHz flag" "Not detected,Detected"
|
|
rbitfld.long 0x14 10. " PRESCL_FLAG_A ,RTC prescale compare 4kHz flag" "Not detected,Detected"
|
|
textline " "
|
|
rbitfld.long 0x14 9. " COMP1_FLAG_A ,RTC compare 1 4kHz flag" "Not matched,Matched"
|
|
rbitfld.long 0x14 8. " COMP0_FLAG_A ,RTC compare 0 4kHz flag" "Not matched,Matched"
|
|
bitfld.long 0x14 5. " SNOOZE ,Activate RTC snooze alarm" "No effect,Activate"
|
|
textline " "
|
|
eventfld.long 0x14 4. " TRIM ,RTC trim interrupt flag" "No adjustment,Adjustment"
|
|
eventfld.long 0x14 3. " OVERFLOW ,RTC overflow interrupt flag" "No overflow,Overflow"
|
|
eventfld.long 0x14 2. " PRESCALE_COMP ,RTC prescale compare int flag" "No match,Match"
|
|
textline " "
|
|
eventfld.long 0x14 1. " COMP1 ,RTC compare 1 interrupt flag" "No interrupt,Interrupt"
|
|
eventfld.long 0x14 0. " COMP0 ,RTC compare 0 interrupt flag" "No interrupt,Interrupt"
|
|
sif (!cpuis("MAX3260*"))
|
|
group.long 0x18++0x03
|
|
line.long 0x00 "RTCTMR_SNZ_VAL,RTC Timer Alarm Snooze Value"
|
|
hexmask.long.word 0x00 0.--9. 1. " VALUE ,Snooze value"
|
|
endif
|
|
group.long 0x1C++0x0F
|
|
line.long 0x00 "RTCTMR_INTEN,Interrupt Enable Controls"
|
|
bitfld.long 0x00 4. " TRIM ,RTC trim adjust event interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3. " OVERFLOW ,RTC overflow interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 2. " PRESCALE_COMP ,RTC prescale compare int enable" "Disabled,Enabled"
|
|
textline " "
|
|
bitfld.long 0x00 1. " COMP1 ,RTC time of day alarm (compare 1) interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " COMP0 ,RTC time of day alarm (compare 0) interrupt enable" "Disabled,Enabled"
|
|
line.long 0x04 "RTCTMR_PRESCALE,RTC Timer Prescale Setting"
|
|
bitfld.long 0x04 0.--3. " PRESCALE ,RTC timer prescale setting" "4kHz,2kHz,1kHz,512Hz,256Hz,128Hz,64Hz,32Hz,16Hz,8Hz,4Hz,2Hz,1Hz,?..."
|
|
line.long 0x08 "RTCTMR_PRESCALE_MASK,RTC Timer Prescale Compare Mask"
|
|
bitfld.long 0x08 0.--3. " PRESCALE_MASK ,RTC timer prescale compare mask" "0000h,0001h,0003h,0007h,000Fh,001Fh,003Fh,007Fh,00FFh,01FFh,03FFh,07FFh,0FFFh,?..."
|
|
line.long 0x0C "RTCTMR_TRIM_CTRL,RTC Timer Trim Controls"
|
|
rbitfld.long 0x0C 2. " TRIM_SLOWER_R ,RTC trim direction status" "Faster,Slower"
|
|
bitfld.long 0x0C 1. " TRIM_FASTER_OVR_R ,Force RTC trim to faster" "Not forced,Forced"
|
|
bitfld.long 0x0C 0. " TRIM_ENABLE_R ,Enable RTL trim of RTC timer" "Disabled,Enabled"
|
|
if (((per.l(ad:0x40000A00+0x28))&0x02)==0x00)
|
|
group.long 0x2C++0x03
|
|
line.long 0x00 "RTCTMR_TRIM_VALUE,RTC Timer Trim Adjustment Interval"
|
|
bitfld.long 0x00 18. " TRIM_SLOWER_CONTROL ,Trim direction" "Faster,Slower"
|
|
hexmask.long.tbyte 0x00 0.--17. 1. " TRIM_VALUE ,Trim PPM Value"
|
|
else
|
|
group.long 0x2C++0x03
|
|
line.long 0x00 "RTCTMR_TRIM_VALUE,RTC Timer Trim Adjustment Interval"
|
|
hexmask.long.tbyte 0x00 0.--17. 1. " TRIM_VALUE ,Trim PPM Value"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
tree "RTCCFG (Real Time Clock Configuration)"
|
|
base ad:0x40000A70
|
|
width 18.
|
|
rgroup.long 0x00++0x03
|
|
line.long 0x00 "RTCCFG_NANO_CNTR,Nano Oscillator Counter Read Register"
|
|
hexmask.long.word 0x00 0.--15. 1. " NANORING_COUNTER ,Nano oscillator counter"
|
|
group.long 0x04++0x03
|
|
line.long 0x00 "RTCCFG_CLK_CTRL,RTC Clock Control Settings"
|
|
bitfld.long 0x00 2. " NANO_EN ,Nano oscillator enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 1. " OSC2_EN ,Oscillator 2 enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 0. " OSC1_EN ,Oscillator 1 enable" "Disabled,Enabled"
|
|
sif (cpuis("MAX3260*"))
|
|
group.long 0x08++0x03
|
|
line.long 0x00 "RTCCFG_DSEN_CTRL,Dynamic Tamper Sensor Control"
|
|
bitfld.long 0x00 0. " DSEN_DISABLE ,Dynamic Tamper Sensor disable" "No,Yes"
|
|
endif
|
|
if (((per.l(ad:0x40000A70+0x0C))&0x04)==0x04)
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "RTCCFG_OSC_CTRL,RTC Oscillator Control"
|
|
rbitfld.long 0x00 3. " OSC_DISABLE_O ,Oscillator disable status" "Not in reset,In reset"
|
|
bitfld.long 0x00 2. " OSC_DISABLE_SEL ,Oscillator disable select" "Power sequencer,Osc_disable_r bit"
|
|
bitfld.long 0x00 1. " OSC_DISABLE_R ,Oscillator disable" "No,Yes"
|
|
bitfld.long 0x00 0. " OSC_BYPASS ,Oscillator bypass" "No effect,Held"
|
|
else
|
|
group.long 0x0C++0x03
|
|
line.long 0x00 "RTCCFG_OSC_CTRL,RTC Oscillator Control"
|
|
rbitfld.long 0x00 3. " OSC_DISABLE_O ,Oscillator disable status" "Not in reset,In reset"
|
|
bitfld.long 0x00 2. " OSC_DISABLE_SEL ,Oscillator disable select" "Power sequencer,Osc_disable_r bit"
|
|
bitfld.long 0x00 0. " OSC_BYPASS ,Oscillator bypass" "No effect,Held"
|
|
endif
|
|
width 0x0B
|
|
tree.end
|
|
sif (cpu()=="MAX32631")
|
|
tree "TPU_TSR (Trust Protection Unit)"
|
|
base ad:0x40007C10
|
|
width 14.
|
|
group.long 0x00++0x0F
|
|
line.long 0x00 "TPU_TSR_SKS0,TPU Secure Key Storage Register 0 (Cleared on Tamper Detect)"
|
|
line.long 0x04 "TPU_TSR_SKS1,TPU Secure Key Storage Register 1 (Cleared on Tamper Detect)"
|
|
line.long 0x08 "TPU_TSR_SKS2,TPU Secure Key Storage Register 2 (Cleared on Tamper Detect)"
|
|
line.long 0x0C "TPU_TSR_SKS3,TPU Secure Key Storage Register 3 (Cleared on Tamper Detect)"
|
|
width 0x0B
|
|
tree.end
|
|
tree "AES (Advanced Encryption Standard)"
|
|
base ad:0x40007400
|
|
width 17.
|
|
group.long 0x00++0x03
|
|
line.long 0x00 "AES_CTRL,AES Control And Status"
|
|
sif (!cpuis("MAX3260*"))
|
|
bitfld.long 0x00 7. " LOAD_HW_KEY ,AES load hardware key" "Not loaded,Loaded"
|
|
textline " "
|
|
endif
|
|
eventfld.long 0x00 6. " INTFL ,AES interrupt flag" "No interrupt,Interrupt"
|
|
bitfld.long 0x00 5. " INTEN ,AES interrupt enable" "Disabled,Enabled"
|
|
bitfld.long 0x00 3.--4. " KEY_SIZE ,AES key size select" "128-bit,192-bit,256-bit,?..."
|
|
textline " "
|
|
bitfld.long 0x00 2. " EXP_KEY_MODE ,AES expanded key mode" "New key,Existing key"
|
|
bitfld.long 0x00 1. " CRYPT_MODE ,AES encrypt/decrypt mode" "Encryption,Decryption"
|
|
bitfld.long 0x00 0. " START ,AES start/busy" "Not started,Started"
|
|
wgroup.long 0x08++0x03
|
|
line.long 0x00 "AES_ERASE_ALL,Write To Trigger AES Memory Erase"
|
|
group.long ad:0x40102000++0x0F
|
|
line.long 0x00 "AES_MEM_INP0,AES Input 0 (Least Significant 32 Bits)"
|
|
line.long 0x04 "AES_MEM_INP1,AES Input 1"
|
|
line.long 0x08 "AES_MEM_INP2,AES Input 2"
|
|
line.long 0x0C "AES_MEM_INP3,AES Input 3 (Most Significant 32 Bits)"
|
|
wgroup.long (ad:0x40102000+0x10)++0x1F
|
|
line.long 0x00 "AES_MEM_KEY0,AES Key 0 (Least Significant 32 Bits)"
|
|
line.long 0x04 "AES_MEM_KEY1,AES Key 1"
|
|
line.long 0x08 "AES_MEM_KEY2,AES Key 2"
|
|
line.long 0x0C "AES_MEM_KEY3,AES Key 3"
|
|
line.long 0x10 "AES_MEM_KEY4,AES Key 4"
|
|
line.long 0x14 "AES_MEM_KEY5,AES Key 5"
|
|
line.long 0x18 "AES_MEM_KEY6,AES Key 6"
|
|
line.long 0x1C "AES_MEM_KEY7,AES Key 7 (Most Significant 32 Bits)"
|
|
group.long (ad:0x40102000+0x30)++0x0F
|
|
line.long 0x00 "AES_MEM_OUT0,AES Output 0 (Least Significant 32 Bits)"
|
|
line.long 0x04 "AES_MEM_OUT1,AES Output 1"
|
|
line.long 0x08 "AES_MEM_OUT2,AES Output 2"
|
|
line.long 0x0C "AES_MEM_OUT3,AES Output 3 (Most Significant 32 Bits)"
|
|
wgroup.long (ad:0x40102000+0x40)++0x1F
|
|
line.long 0x00 "AES_MEM_EXPKEY0,AES Expanded Key Data 0"
|
|
line.long 0x04 "AES_MEM_EXPKEY1,AES Expanded Key Data 1"
|
|
line.long 0x08 "AES_MEM_EXPKEY2,AES Expanded Key Data 2"
|
|
line.long 0x0C "AES_MEM_EXPKEY3,AES Expanded Key Data 3"
|
|
line.long 0x10 "AES_MEM_EXPKEY4,AES Expanded Key Data 4"
|
|
line.long 0x14 "AES_MEM_EXPKEY5,AES Expanded Key Data 5"
|
|
line.long 0x18 "AES_MEM_EXPKEY6,AES Expanded Key Data 6"
|
|
line.long 0x1C "AES_MEM_EXPKEY7,AES Expanded Key Data 7"
|
|
width 0x0B
|
|
tree.end
|
|
endif
|
|
tree "CRC (Cyclic Redundancy Check)"
|
|
base ad:0x40006000
|
|
width 18.
|
|
group.long 0x00++0x0B
|
|
line.long 0x00 "RCR_RESEED,CRC-16/CRC-32 Reseed Controls"
|
|
bitfld.long 0x00 23. " CCITT_MODE ,CRC16-CCITT mode" "False,True"
|
|
bitfld.long 0x00 26. " REV_ENDIAN32 ,Reverse endianness for CRC32" "Standard,Reverse"
|
|
bitfld.long 0x00 27. " REV_ENDIAN16 ,Reverse endianness for CRC16" "Standard,Reverse"
|
|
eventfld.long 0x00 30. " CRC32 ,Reseed CRC-32 generator" "Not reseeded,Reseeded"
|
|
textline " "
|
|
eventfld.long 0x00 31. " CRC16 ,Reseed CRC-16 generator" "Not reseeded,Reseeded"
|
|
line.long 0x04 "CRC_SEED16,Reseed Value For CRC-16 Calculations"
|
|
line.long 0x08 "CRC_SEED32,Reseed Value For CRC-32 Calculations"
|
|
group.long 0xFB000++0x03
|
|
line.long 0x00 "CRC_DATA_VALUE16,Write Next CRC-16 Data Value/read CRC-16 Result Value"
|
|
group.long 0xFB800++0x03
|
|
line.long 0x00 "CRC_DATA_VALUE32,Write Next CRC-32 Data Value/read CRC-32 Result Value"
|
|
width 0x0B
|
|
tree.end
|
|
textline " "
|