Gen4_R-Car_Trace32/2_Trunk/demo/arm/flash/stm32h7xx-qspi.cmm

; --------------------------------------------------------------------------------
; @Title: Flash declaration for ST STM32H7xx QSPI flash program (Memory Mapped)
; @Description:
;   Script arguments:
;
;    DO stm32h7xx-qspi [PREPAREONLY] [CPU=<cpu>] [DUALPORT=0|1]
;
;      PREPAREONLY only declares flash but does not execute flash programming
;
;      CPU=<cpu> selects CPU derivative <cpu>
;
;      DUALPORT=0|1 default value is 0 (disabled).
;
;   Example:
;
;   DO ~~/demo/arm/flash/stm32h7xx-qspi PREPAREONLY DUALPORT=1
;
; @Author: JIM
; @Chip: STM32H743XI
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Rev: 11733 $
; $Id: stm32h7xx-qspi.cmm 11733 2023-01-16 08:55:12Z bschroefel $

&QSPI_BASE=0x52005000

PRIVATE &parameters
ENTRY %LINE &parameters

PRIVATE &param_prepareonly &param_cpu &param_dualport
&param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
&param_cpu=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"CPU=","")
&param_dualport=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"DUALPORT=","0")

; ------------------------------------------------------------------------------
; Setup CPU

IF SYStem.MODE()<5
(
SYStem.RESet

PRINT "initializing..."
SYStem.CPU STM32H743XI
SYStem.CONFIG.DEBUGPORTTYPE SWD
IF COMBIPROBE()||UTRACE()
(
  SYStem.CONFIG.CONNECTOR MIPI20T
)
SYStem.Option DUALPORT ON
SYStem.MemAccess DAP
SYStem.JtagClock CTCK 10MHz
Trace.DISable
SYStem.Up

)

WinCLEAR
AREA.view

GOSUB Init_QSPI

//EXIT QUAD INPUT/OUTPUT MODE, to make the single spi mode
GOSUB WRITEBYTE_QPI   0xF5

GOSUB READ_ID_TEST

//switch QSPI to the memory mapped mode
Data.Set  A:&QSPI_BASE      %Long  (Data.Long(A:&QSPI_BASE)&~0x1)  ;disable
Data.Set  A:&QSPI_BASE+0x14 %Long  0x0D003513   ; FMODE, READ cmd(0x13), ADSize 32b and so on...
Data.Set  A:&QSPI_BASE      %Long  (Data.Long(A:&QSPI_BASE)|0x1)  ;enable

; ------------------------------------------------------------------------------
; Flash declaration
GOSUB FlashDeclaration "&param_dualport"

; Flash script ends here if called with parameter PREPAREONLY
IF &param_prepareonly
  ENDDO PREPAREDONE

; -------------------------------------------------------------------------------
; Flash programming example

DIALOG.YESNO "Program flash memory?"
LOCAL &progflash
ENTRY &progflash
IF &progflash
(
  FLASH.ReProgram.ALL
  Data.LOAD.auto *
  FLASH.ReProgram.off

  ; Reset device
  SYStem.Down
  SYStem.Up
)

ENDDO


Init_QSPI:
(
Data.Set A:0x580244D4 %LE %Long 0x4000      ; RCC_AHB3ENR, Quad SPI memory controller clock enable

Data.Set A:0x5802447C %LE %Long 0x4000      ; RCC_AHB3RSTR, Quad SPI memory controller reset
Data.Set A:0x5802447C %LE %Long 0x0000      ; RCC_AHB3RSTR, release Quad SPI memory controller reset
Data.Set A:0x580244FC %LE %LONG 0x4000      ; RCC_AHB3LPENR, QUADSPI memory controller clock enable during Sleep mode

Data.Set A:0x580244E0 %LE %Long 0x0000006B  ; GPIOB & GPIOD & GPIOF & GPIOG clk enable

;C   <-> GPIOB[2]   en ALT 9,  (QUADSPI_CLK)	
;CS1 <-> GPIOG[6]   en ALT 10, (QUADSPI_BK1_NCS)
;DQ0 <-> GPIOD[11]  en ALT 9,  (QUADSPI_BK1_IO0)
;DQ1 <-> GPIOD[12]  en ALT 9,  (QUADSPI_BK1_IO1)
;DQ2 <-> GPIOF[7]   en ALT 9,  (QUADSPI_BK1_IO2)
;DQ3 <-> GPIOD[13]  en ALT 9.  (QUADSPI_BK1_IO3)

Data.Set A:0x58020400 %LE %Long 0xFFFFFFEF  ; GPIOB_MODER
Data.Set A:0x58020408 %LE %Long 0x00000030  ; Very high speed
Data.Set A:0x58020420 %LE %Long 0x00000900  ; PB2 alt 9

Data.Set A:0x58020C00 %LE %Long 0xFABFFFFF  ; GPIOD_MODER
Data.Set A:0x58020C08 %LE %Long 0x0FC00000  ; Very high speed
Data.Set A:0x58020C24 %LE %Long 0x00999000  ; PD11, 12 & 13 alt 9

Data.Set A:0x58021400 %LE %Long 0xFFFFBFFF  ; GPIOF_MODER
Data.Set A:0x58021408 %LE %Long 0x0000C000  ; Very high speed 	
Data.Set A:0x58021420 %LE %Long 0x90000000  ; PF7 alt 9

Data.Set A:0x58021800 %LE %Long 0xFFFFEFFF  ; GPIOG_MODER
Data.Set A:0x58021808 %LE %Long 0x00003000 	; Very high speed 
Data.Set A:0x58021820 %LE %Long 0x0A000000  ; PG6 alt 10

Data.Set A:0x52005000 %Long 0x01000311      ; QUADSPI_CR, QUADSPI control register, enable clk and prescaler
Data.Set A:0x52005004 %Long 0x00170100      ; QUADSPI_DCR, flash size 2^24 (16MBytes)
Data.Set A:0x5200500C %Long 0xFF            ; QUADSPI_FCR, QUADSPI flag clear register

RETURN
)

READ_ID_TEST:
(
&QSPI_FCR=&QSPI_BASE+0xC
&QSPI_CCR=&QSPI_BASE+0x14
&QSPI_DLR=&QSPI_BASE+0x10
&QSPI_DR=&QSPI_BASE+0x20

Data.Set A:&QSPI_FCR %LE %Long 0x1F  ;clear status

// 1 instruction , 4 read data
Data.Set A:&QSPI_DLR  %Long 0x3  ; 4byte data read

&ccr=0x19F             ; imode with insturction  1byte instruction write
&ccr=&ccr|(0x1<<24.)   ; dmode single
&ccr=&ccr|(0x1<<26.)   ; indirect read mode
Data.Set A:&QSPI_CCR %LE %Long &ccr

&read_data=Data.Long(A:&QSPI_DR)  ;read little endian

PRINT "1st 0x" &read_data&0xFF        " (Manufacturer)"
PRINT "2nd 0x" (&read_data>>8.)&0xFF  " (Device ID)"
PRINT "3rd 0x" (&read_data>>16.)&0xFF 
PRINT "4th 0x" (&read_data>>24.)&0xFF 

RETURN
)


WRITEBYTE_QPI:
(
ENTRY &wdata

SCREEN.OFF

Data.Set A:(&QSPI_BASE+0xC) %LE %Long 0x1F  ;clear status

&ccr=(0x3<<8)|&wdata       ; imode with insturction  1byte instruction write
Data.Set A:(&QSPI_BASE+0x14) %LE %Long &ccr

SCREEN.ON

RETURN 
)

; Flash declaration

FlashDeclaration:
(
  PRIVATE &FlashSize &FlashDriver  &FlashBaseAddr
  PARAMETERS &DualPort

  &FlashDriver="snor_stm32h7.bin"
  &FlashSize=0x4000000       ;64Mbytes
  &FlashBaseAddr=0x90000000  ;SPI AHB base address
  
  FLASH.RESet
  
  rpt (&FlashSize)>>24.
  (
    FLASH.Create    &FlashBaseAddr++0xFFFFFF    0x10000   TARGET   Byte
    &FlashBaseAddr =&FlashBaseAddr+0x1000000     ;16Mbytes
  )

  IF "&DualPort"=="0"
    FLASH.TARGET 0x20000000 0x20002000 0x4000 ~~/demo/arm/flash/byte/&FlashDriver
  ELSE
    FLASH.TARGET 0x20000000 EAHB:0x20002000 0x4000 ~~/demo/arm/flash/byte/&FlashDriver /DualPort

  FLASH.List

  RETURN
)