woody/Gen4_R-Car_Trace32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
main
Gen4_R-Car_Trace32/2_Trunk/demo/arm/flash/stm32g0xx-optionbyte.cmm
woody d411edd9b4 add Trace32 File
2025-10-14 09:52:32 +09:00

1387 lines
40 KiB
Plaintext
Raw Permalink Blame History

; --------------------------------------------------------------------------------
; @Title: ST STM32G0xx Flash Dialog to program Option Bytes.
;
; @Description:
; Script arguments:
;
; do stm32g0xx-optionbyte [RDP=0|1|NODEBUG]
; [BOR_EN=0|1] [BORF_LEV=0|1] [BORR_LEV=0|1] [NRST_STOP=0|1]
; [NRST_STDBY=0|1] [NRSTS_SHDW=0|1] [IWDG_SW=0|1] [IWDG_STOP=0|1]
; [IWDG_STDBY=0|1] [WWDG_SW=0|1] [RAM_PARITY_CHECK_DIS=0|1]
; [NBOOT_SEL=0|1] [NBOOT1=0|1] [NBOOT0=0|1] [NRST_MODE=0|1|2|3]
; [IRHEN=0|1]
; [PCROP1A_START=<val>] [PCROP1A_END=<val>] [PCROP_RDP=0|1]
; [PCROP1B_START=<val>] [PCROP1B_END=<val>]
; [WRP1A_START=<val>] [WRP1A_END=<val>]
; [WRP1B_START=<val>] [_WRP1B_END=<val>]
; [SEC_SIZE=<val> [BOOT_LOCK=0|1]
; [RESETDEVICE]
;
; RDP=0|1|NODEBUG is programming read protection option byte
; 0: disables flash read protection
; 1: enables flash read protection
; NODEBUG: no debug
;
; BOR_EN=0|1
; 0: Configurable brown out reset disabled
; 1: Configurable brown out reset enabled
;
; BORF_LEV=0..1: BOR Falling level
; Contains the VDD supply level threshold that activates the reset
; 0: BORF Level0: BOR falling level 1 with threshold around 2.0 V
; 1: BORF Level1: BOR falling level 2 with threshold around 2.2 V
; 2: BORF Level2: BOR falling level 3 with threshold around 2.5 V
; 3: BORF Level3: falling level 4 with threshold around 2.8 V
;
; BORR_LEV=0..1: BOR Rising level
; Contains the VDD supply level threshold that releases the reset.
; 0: BORR Level0: BOR rising level 1 with threshold around 2.1 V
; 1: BORR Level1: BOR rising level 2 with threshold around 2.3 V
; 2: BORR Level2: BOR rising level 3 with threshold around 2.6 V
; 3: BORR Level3: BOR rising level 4 with threshold around 2.9 V
;
; NRST_STOP=0|1 is programming nRST_STOP bit of user option byte
; 0: Reset generated when entering Stop mode
; 1: No reset generated when entering Stop mode
;
; NRST_STDBY=0|1 is programming nRST_STDBY bit of user option byte
; 0: Reset generated when entering Standby mode
; 1: No reset generated when entering Standby mode
;
; NRSTS_SHDW=0|1 is programming nRSTS_SHDW bit of user option byte
; 0: Reset generated when entering the Shutdown mode
; 1: No reset generated when entering the Shutdown mode
;
; IWDG_SW=0|1 is programming IWDG_SW bit of user option byte
; 0: Hardware independent watchdog
; 1: Software independent watchdog
;
; IWDG_STOP=0|1 is programming IWDG_STOP bit of user option byte
; 0: Independent watchdog counter is frozen in Stop mode
; 1: Independent watchdog counter is running in Stop mode
;
; IWDG_STDBY=0|1 is programming IWDG_STDBY bit of user option byte
; 0: Independent watchdog counter is frozen in Standby mode
; 1: Independent watchdog counter is running in Standby mode
;
; WWDG_SW=0|1 is programming WWDG_SW bit of user option byte
; 0: Hardware window watchdog
; 1: Software window watchdog
;
; RAM_PARITY_CHECK_DIS=0|1 is programming RAM_PARITY_CHECK_DIS bit
; of user option byte
; 0: RAM parity check enabled
; 1: RAM parity check disabled
;
; BOOT_SEL=0|1 is programming BOOT_SEL bit of user option byte
; 0: BOOT0 signal is defined by BOOT0 pin value (legacy mode)
; 1: BOOT0 signal is defined by NBOOT0 option bit
;
; NBOOT0=0|1 is programming NBOOT0 option bit of user option byte
; 0: NBOOT0=0
; 1: NBOOT0=1
;
; NBOOT1=0|1 is programming NBOOT1 bit of user option byte
; Together with the BOOT0 pin or NBOOT0, it selects the boot mode
;
; NRST_MODE=<val> is programming NRST_MODE bit of user option byte
; 0: undefined
; 1: Reset Input only
; 2: GPIO
; 3: Bidirectional reset
;
; IRHEN=0|1 is programming IRHEN bit of user option byte
; 0: Internal resets are propagated as simple pulse on NRST pin
; 1: Internal resets drives NRST pin low until it is seen as low level
;
; PCROP1A_START=<val> flash start address for protection zone A
; e.g. PCROP1A_START=0x0801f00
; PCROP1A_END=<val> flash end address for protection zone A
; e.g. PCROP1A_end=0x0801fff
; PCROP_RDP=0|1 is programming PCROP_RDP bit of PCROP1A_END
; 0: Not erased
; 1: Erased
;
; PCROP1B_START=<val> PCROP1B flash start address for protection zone B
; PCROP1B_END=<val> PCROP1B flash end address for protection zone B
;
; WRP1A_START=<val> flash start address for write protection zone A
; WRP1A_END=<val> flash start address for write protection zone A
;
; WRP1B_START=<val> flash start address for write protection zone B
; WRP1B_END=<val> Wflash start address for write protection zone B
;
; SEC_SIZE=<val> is programming the number of securable Flash memory pages
;
; BOOT_LOCK=0|1
; 0: Boot based on the pad/option bit configuration
; 1: Boot forced from Main Flash memory
;
; RESETDEVICE reset device after option byte programming
;
; Calling the script without argument starts the Option Byte programming
; dialog window.
;
; @Author: PHI
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Rev: 10516 $
; $Id: stm32g0xx-optionbyte.cmm 10516 2022-02-02 11:39:30Z bschroefel $
PRIVATE &parameters
ENTRY %LINE &parameters
; PRIVATE macros used as script global macros
LOCAL &FlashRegBase ; Flash controller base address
LOCAL &FlashAddress ; Main flash start address
LOCAL &OptionByteBase ; Option byte base address
LOCAL &FlashSize ; Flash size
LOCAL &pcrop_granularity &wrp_granularity
&FlashRegBase="D:0x40022000"
&OptionByteBase="D:0x1FFF7800"
&FlashAddress="0x08000000" ; used for calculation only therefore without D:
&pcrop_granularity=0x200
&wrp_granularity=0x800
; Macros for the Option Bytes
LOCAL &OptByte_RDP &OptByte_USER &OptByte_PCROP1A_START &OptByte_PCROP1A_END
LOCAL &OptByte_PCROP_RDP &OptByte_WRP1A_START &OptByte_WRP1A_END
LOCAL &OptByte_WRP1B_START &OptByte_WRP1B_END &OptByte_PCROP1B_START
LOCAL &OptByte_PCROP1B_END &OptByte_SEC_SIZE &OptByte_BOOT_LOCK
&OptByte_RDP=0xAA
&OptByte_USER=0x0
; Look for any opened STM32G0xx dialog windows and close them
WHILE DIALOG.EXIST(CHK_NBOOT0)
DIALOG.END
; Checking CPU selection
IF !CPUIS(STM32G0*)
SYStem.CPU STM32G0*
; Check system mode
IF SYStem.MODE()<5
SYStem.Up
; Setup configuration for CPU derivative
IF CPUIS(STM32G0???4*)
(
&FlashSize=0x4000
)
ELSE IF CPUIS(STM32G0???6*)
(
&FlashSize=0x8000
)
ELSE IF CPUIS(STM32G0???8*)
(
&FlashSize=0x10000
)
ELSE IF CPUIS(STM32G0???B*)
(
&FlashSize=0x20000
)
ELSE
(
DIALOG.OK SYStem.CPU()+" is not supported by the script"
ENDDO
)
; Parse script arguments
IF "&parameters"==""
(
;print "Call script with parameters: DO stm32l1xx-optionbyte [RDP=0|1|NODEBUG] [NRST_STDBY=0|1] [NRST_STOP=0|1] [IWDG_SW=0|1] [WRP1=<val>] [WRP2=<val>]"
GOSUB OptionByteDialog
)
ELSE
(
PRIVATE &param_RDP &param_BOR_LEVF &param_BOR_LEVR &param_BOR_LEVE
PRIVATE &param_nRST_STOP &param_nRST_STDBY &param_nRSTS_SHDW
PRIVATE &param_IWDG_SW &param_IWDG_STOP &param_IWDG_STDBY
PRIVATE &param_WWDG_SW &param_RAM_PARITY_CHECK_DIS
PRIVATE &param_NBOOT_SEL &param_NBOOT0 &param_NBOOT1 &param_nRST_MODE &param_IRHEN
PRIVATE &param_PCROP1A_START &param_PCROP1A_END &param_PCROP_RDP
PRIVATE &param_PCROP1B_START &param_PCROP1B_END
PRIVATE &param_WRP1A_START &param_WRP1A_END
PRIVATE &param_WRP1B_START &param_WRP1B_END
PRIVATE &param_SEC_SIZE &param_BOOT_LOCK
PRIVATE &param_resetDevice
PRIVATE &read_user
&param_RDP=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"RDP=","")
&param_BOR_EN=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"BOR_EN=","")
&param_BORF_LEV=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"BORF_LEV=","")
&param_BORR_LEV=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"BORR_LEV=","")
&param_nRST_STOP=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"NRST_STOP=","")
&param_nRST_STDBY=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"NRST_STDBY=","")
&param_nRSTS_SHDW=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"NRSTS_SHDW=","")
&param_IWDG_SW=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"IWDG_SW=","")
&param_IWDG_STOP=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"IWDG_STOP=","")
&param_IWDG_STDBY=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"IWDG_STDBY=","")
&param_WWDG_SW=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"WWDG_SW=","")
&param_RAM_PARITY_CHECK_DIS=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"RAM_PARITY_CHECK_DIS=","")
&param_NBOOT_SEL=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"NBOOT_SEL=","")
&param_NBOOT1=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"NBOOT1=","")
&param_NBOOT0=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"NBOOT0=","")
&param_nRST_MODE=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"NRST_MODE=","")
&param_IRHEN=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"IRHEN=","")
&param_PCROP1A_START=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"PCROP1A_START=","")
&param_PCROP1A_END=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"PCROP1A_END=","")
&param_PCROP_RDP=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"PCROP1A_RDP=","")
&param_PCROP1B_START=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"PCROP1B_START=","")
&param_PCROP1B_END=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"PCROP1B_END=","")
&param_WRP1A_START=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"WRP1A_START=","")
&param_WRP1A_END=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"WRP1A_END=","")
&param_WRP1B_START=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"WRP1B_START=","")
&param_WRP1B_END=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"WRP1B_END=","")
&param_SEC_SIZE=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"SEC_SIZE=","")
&param_BOOT_LOCK=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"BOOT_LOCK=","")
&param_resetDevice=(STRing.SCAN(STRing.UPpeR("&parameters"),"RESETDEVICE",0)!=-1)
GOSUB ReadOptionBytes
IF "&param_RDP"!=""
(
IF "&param_RDP"!=""
(
IF "&param_RDP"=="0"
&OptByte_RDP=0xAA
ELSE IF "&param_RDP"=="1"
&OptByte_RDP=0x00
ELSE IF "&param_RDP"=="NODEBUG"
&OptByte_RDP=0xCC
ELSE
(
PRINT %ERROR "Illegal parameter RDP="+"&param_RDP"
ENDDO
)
)
IF (&OptByte_RDP==0xCC)
(
GOSUB QueryNoDebug
ENTRY &nodebug
IF (!&nodebug)
ENDDO
)
)
IF "&param_BOR_EN"!=""
(
IF "&param_BOR_EN"=="1"
&OptByte_USER=&OptByte_USER|0x000001
ELSE IF "&param_BOR_EN"=="0"
&OptByte_USER=&OptByte_USER&0xFFFFFE
ELSE
(
PRINT %ERROR "Illegal parameter BOR_EN="+"&param_BOR_EN"
ENDDO
)
)
IF "&param_BORF_LEV"!=""
(
IF (&param_BORF_LEV>0x3||&param_BORF_LEV<0x0)
(
PRINT %ERROR "Illegal parameter BORF_LEV="+"&PARAM_BORF_LEV" "! BORF_LEV is out of range! " "BOR_LEV must be a 8-bit unsigned numeric value"
ENDDO
)
&OptByte_USER=(&OptByte_USER&0xFF9)|(&param_BORF_LEV<<1.)
)
IF "&param_BORR_LEV"!=""
(
IF (&param_BORR_LEV>0x3||&param_BORR_LEV<0x0)
(
PRINT %ERROR "Illegal parameter BORR_LEV="+"&PARAM_BORR_LEV" "! BORR_LEV is out of range! " "BOR_LEV must be a 8-bit unsigned numeric value"
ENDDO
)
&OptByte_USER=(&OptByte_USER&0xFE7)|(&param_BORR_LEV<<3.)
)
IF "&param_nRST_STOP"!=""
(
IF "&param_nRST_STOP"=="1"
&OptByte_USER=&OptByte_USER|0x000020
ELSE IF "&param_nRST_STOP"=="0"
&OptByte_USER=&OptByte_USER&0xFFFFDF
ELSE
(
PRINT %ERROR "Illegal parameter NRST_STOP="+"&param_nRST_STOP"
ENDDO
)
)
IF "&param_nRST_STDBY"!=""
(
IF "&param_nRST_STDBY"=="1"
&OptByte_USER=&OptByte_USER|0x000040
ELSE IF "&param_nRST_STDBY"=="0"
&OptByte_USER=&OptByte_USER&~0x40
ELSE
(
PRINT %ERROR "Illegal parameter NRST_STDBY="+"&param_nRST_STDBY"
ENDDO
)
)
IF "&param_nRSTS_SHDW"!=""
(
IF "&param_nRSTS_SHDW"=="1"
&OptByte_USER=&OptByte_USER|0x000080
ELSE IF "&param_nRSTS_SHDW"=="0"
&OptByte_USER=&OptByte_USER&0xFFFF7F
ELSE
(
PRINT %ERROR "Illegal parameter nRSTS_SHDW="+"&param_nRSTS_SHDW"
ENDDO
)
)
IF "&param_IWDG_SW"!=""
(
IF "&param_IWDG_SW"=="1"
&OptByte_USER=&OptByte_USER|0x000100
ELSE IF "&param_IWDG_SW"=="0"
&OptByte_USER=&OptByte_USER&0xFFFEFF
ELSE
(
PRINT %ERROR "Illegal parameter IWDG_SW="+"&param_IWDG_SW"
ENDDO
)
)
IF "&param_IWDG_STOP"!=""
(
IF "&param_IWDG_STOP"=="1"
&OptByte_USER=&OptByte_USER|0x000200
ELSE IF "&param_IWDG_STOP"=="0"
&OptByte_USER=&OptByte_USER&0xFFFDFF
ELSE
(
PRINT %ERROR "Illegal parameter IWDG_STOP="+"&param_IWDG_STOP"
ENDDO
)
)
IF "&param_IWDG_STDBY"!=""
(
IF "&param_IWDG_STDBY"=="1"
&OptByte_USER=&OptByte_USER|0x000400
ELSE IF "&param_IWDG_STDBY"=="0"
&OptByte_USER=&OptByte_USER&0xFFFBFF
ELSE
(
PRINT %ERROR "Illegal parameter IWDG_STDBY="+"&param_IWDG_STDBY"
ENDDO
)
)
IF "&param_WWDG_SW"!=""
(
IF "&param_WWDG_SW"=="1"
&OptByte_USER=&OptByte_USER|0x000800
ELSE IF "&param_WWDG_SW"=="0"
&OptByte_USER=&OptByte_USER&0xFFF7FF
ELSE
(
PRINT %ERROR "Illegal parameter WWDG_SW="+"&param_WWDG_SW"
ENDDO
)
)
IF "&param_RAM_PARITY_CHECK_DIS"!=""
(
IF "&param_RAM_PARITY_CHECK_DIS"=="1"
&OptByte_USER=&OptByte_USER|0x004000
ELSE IF "&param_RAM_PARITY_CHECK_DIS"=="0"
&OptByte_USER=&OptByte_USER&0xFFBFFF
ELSE
(
PRINT %ERROR "Illegal parameter RAM_PARITY_CHECK_DIS="+"&param_RAM_PARITY_CHECK_DIS"
ENDDO
)
)
IF "&param_NBOOT_SEL"!=""
(
IF "&param_NBOOT_SEL"=="1"
&OptByte_USER=&OptByte_USER|0x010000
ELSE IF "&param_NBOOT_SEL"=="0"
&OptByte_USER=&OptByte_USER&0xFEFFFF
)
IF "&param_NBOOT1"!=""
(
IF "&param_NBOOT1"=="1"
&OptByte_USER=&OptByte_USER|0x020000
ELSE IF "&param_NBOOT1"=="0"
&OptByte_USER=&OptByte_USER&0xFDFFFF
ELSE
(
PRINT %ERROR "Illegal parameter NBOOT1="+"&param_NBOOT1"
ENDDO
)
)
IF "&param_NBOOT0"!=""
(
IF "&param_NBOOT0"=="1"
&OptByte_USER=&OptByte_USER|0x40000
ELSE IF "&param_NBOOT0"=="0"
&OptByte_USER=&OptByte_USER&0xFBFFFF
ELSE
(
PRINT %ERROR "Illegal parameter NBOOT0="+"&param_NBOOT0"
ENDDO
)
)
IF "&param_nRST_MODE"!=""
(
IF ("&param_nRST_MODE">"0")&&("&param_nRST_MODE"<="3")
&OptByte_USER=(&OptByte_USER&~(0x3<<19.))|(&param_nRST_MODE<<19.)
ELSE
(
PRINT %ERROR "Illegal parameter value for nRST_MODE="+"&param_nRST_MODE"
ENDDO
)
)
IF "&param_IRHEN"!=""
(
IF "&param_IRHEN"=="1"
&OptByte_USER=&OptByte_USER|0x200000
ELSE IF "&param_IRHEN"=="0"
&OptByte_USER=&OptByte_USER&0xDFFFFF
ELSE
(
PRINT %ERROR "Illegal parameter IRHEN="+"&param_IRHEN"
ENDDO
)
)
IF ("&param_PCROP1A_START"!="")||("&param_PCROP1A_END"!="")
(
IF "&param_PCROP1A_START"==""
(
PRINT %ERROR "Missing value for PCROP1A_START"
ENDDO
)
ELSE IF "&param_PCROP1A_END"==""
(
PRINT %ERROR "Missing value for PCROP1A_END"
ENDDO
)
ELSE
(
&OptByte_PCROP1A_START=(&param_PCROP1A_START-&FlashAddress)/&pcrop_granularity
&OptByte_PCROP1A_END=(&param_PCROP1A_END-&FlashAddress)&~(&pcrop_granularity-1)
&OptByte_PCROP1A_END=&OptByte_PCROP1A_END/&pcrop_granularity
)
)
ELSE
(
&OptByte_PCROP1A_START=0xFF
&OptByte_PCROP1A_END=0x0
)
IF "&param_PCROP_RDP"!=""
(
IF "&param_PCROP_RDP"=="1"
&OptByte_PCROP_RDP=0x80000000
ELSE IF "&param_PCROP_RDP"=="0"
&OptByte_PCROP_RDP=0x0
ELSE
(
PRINT %ERROR "Illegal parameter PCROP1A_RDP="+"&param_PCROP_RDP"
ENDDO
)
)
IF ("&param_PCROP1B_START"!="")||("&param_PCROP1B_END"!="")
(
IF "&param_PCROP1B_START"==""
(
PRINT %ERROR "Missing value for PCROP1B_START"
ENDDO
)
ELSE IF "&param_PCROP1B_END"==""
(
PRINT %ERROR "Missing value for PCROP1B_END"
ENDDO
)
ELSE
(
&OptByte_PCROP1B_START=(&param_PCROP1B_START-&FlashAddress)/&pcrop_granularity
&OptByte_PCROP1B_END=(&param_PCROP1B_END-&FlashAddress)&~(&pcrop_granularity-1)
&OptByte_PCROP1B_END=&OptByte_PCROP1B_END/&pcrop_granularity
)
)
ELSE
(
&OptByte_PCROP1B_START=0xFF
&OptByte_PCROP1B_END=0x0
)
IF ("&param_WRP1A_START"!="")||("&param_WRP1A_END"!="")
(
IF "&param_WRP1A_START"==""
(
PRINT %ERROR "Missing value for WRP1A_START"
ENDDO
)
ELSE IF "&param_WRP1A_END"==""
(
PRINT %ERROR "Missing value for WRP1A_END"
ENDDO
)
ELSE
(
&OptByte_WRP1A_START=(&param_WRP1A_START-&FlashAddress)/&wrp_granularity
&OptByte_WRP1A_END=(&param_WRP1A_END-&FlashAddress)&~(&wrp_granularity-1)
&OptByte_WRP1A_END=&OptByte_WRP1A_END/&wrp_granularity
)
)
ELSE
(
&OptByte_WRP1A_START=0xFF
&OptByte_WRP1A_END=0x0
)
IF ("&param_WRP1B_START"!="")||("&param_WRP1B_END"!="")
(
IF "&param_WRP1B_START"==""
(
PRINT %ERROR "Missing value for WRP1B_START"
ENDDO
)
ELSE IF "&param_WRP1B_END"==""
(
PRINT %ERROR "Missing value for WRP1B_END"
ENDDO
)
ELSE
(
&OptByte_WRP1B_START=(&param_WRP1B_START-&FlashAddress)/&wrp_granularity
&OptByte_WRP1B_END=(&param_WRP1B_END-&FlashAddress)&~(&wrp_granularity-1)
&OptByte_WRP1B_END=&OptByte_WRP1B_END/&wrp_granularity
)
)
ELSE
(
&OptByte_WRP1B_START=0xFF
&OptByte_WRP1B_END=0x0
)
IF "&param_SEC_SIZE"!=""
(
&OptByte_SEC_SIZE=&param_SEC_SIZE&0x0000007F
)
IF "&param_BOOT_LOCK"!=""
(
IF "&param_BOOT_LOCK"=="1"
&OptByte_BOOT_LOCK=0x1
ELSE IF "&param_BOOT_LOCK"=="0"
&OptByte_BOOT_LOCK=0x0
ELSE
(
PRINT %ERROR "Illegal parameter BOOT_LOCK="+"&param_BOOT_LOCK"
ENDDO
)
)
; Program option bytes into flash
GOSUB ProgramOptionBytes
; Reset device to activate programmed option bytes
IF &param_resetDevice
GOSUB ResetDevice
)
ENDDO
; --------------------------------------------------------------------------------
; NVM bit programming dialog window
OptionByteDialog:
(
; Creating the main dialog. (& after DIALOG command must be in first column!
WinPOS 50. 5. 70. 30.
DIALOG.view
(&
HEADER SYStem.CPU()+" option bytes"
POS 1. 1. 67. 3.
BOX "Read protection level"
POS 3. 2. 20. 1.
CHSB_RDP.OFF: CHOOSEBOX "no read protection" ""
POS 24. 2. 20. 1.
CHSB_RDP.ON: CHOOSEBOX "read protection" ""
POS 45. 2. 20. 1.
CHSB_RDP.NODEBUG: CHOOSEBOX "no debug" "GOSUB SelectNoDebug"
POS 1. 4. 67. 18.
BOX "User option bytes"
POS 3. 5. 20. 1.
TEXT "BOR Falling Level:"
POS 15. 5. 20. 1.
COMB_BORLEVF: COMBOBOX "Level 1:threshold around 2.0 V,Level 2:threshold around 2.2 V,Level 3:threshold around 2.5 V,Level 4:threshold around 2.8 V" ""
POS 3. 6. 20. 1.
TEXT "BOR Rising Level:"
POS 15. 6. 20. 1.
COMB_BORLEVR: COMBOBOX "Level 1:threshold around 2.1 V,Level 2:threshold around 2.3 V,Level 3:threshold around 2.6 V,Level 4:threshold around 2.9 V" ""
POS 38. 5. 25. 1.
CHSB_BOREN.POR: CHOOSEBOX "Power-on reset defined by POR/PDR levels" ""
CHSB_BOREN.BOR: CHOOSEBOX "Brown out reset determined by BORR_LEV and BORF_LEV" ""
POS 3. 8. 24. 1.
CHK_RST_STOP: CHECKBOX "Reset when entering Stop mode" ""
POS 3. 9. 24. 1.
CHK_RST_STDBY: CHECKBOX "Reset when entering Standby mode" ""
POS 33. 8. 35. 1.
CHK_NRSTS_SHDW: CHECKBOX "Reset when entering Shutdown mode" ""
POS 3. 11. 15. 1.
CHSB_WDG.HW: CHOOSEBOX "Hardware watchdog" ""
CHSB_WDG.SW: CHOOSEBOX "Software watchdog" ""
POS 21. 11. 24. 1.
CHK_WDG_STOP: CHECKBOX "Watchdog counter freeze in Stop mode" ""
POS 21. 12. 24. 1.
CHK_WDG_STDBY: CHECKBOX "Watchdog counter freeze in Standby mode" ""
POS 46. 11. 20. 1.
CHSB_WWDG.HW: CHOOSEBOX "Hardware window watchdog" ""
CHSB_WWDG.SW: CHOOSEBOX "Software window watchdog" ""
POS 3. 14. 19. 1.
CHK_BOOT_LOCK: CHECKBOX "Main flash memory forced" ""
POS 3. 15. 22. 1.
CHSB_BOOTSEL.OPT: CHOOSEBOX "NBOOT0 is NBOOT option bit" ""
CHSB_BOOTSEL.PIN: CHOOSEBOX "NBOOT0 is NBOOT0 pin" ""
POS 33. 14. 15. 1.
CHK_NBOOT0: CHECKBOX "NBOOT0 is main flash" ""
POS 33. 15. 34. 1.
CHSB_NBOOT1.SYSMEM: CHOOSEBOX "NBOOT1 is system memory (if BOOT0 not main flash)" ""
CHSB_NBOOT1.SRAM: CHOOSEBOX "NBOOT1 is embedded SRAM (if BOOT0 not main flash)" ""
POS 33. 18. 20. 1.
CHK_RAM_PARITY_CHECK_DIS: CHECKBOX "RAM Parity Check disabled" ""
POS 3. 18. 26. 1.
CHSB_NRST.RESETIN: CHOOSEBOX "NRST pin generates system reset" ""
CHSB_NRST.GPIO: CHOOSEBOX "Only internal reset" ""
CHSB_NRST.BIDIRECT: CHOOSEBOX "NRST pin configured in reset input/output mode" ""
POS 33. 19. 34. 1.
CHSB_IRHEN.PULSE: CHOOSEBOX "Internal reset generates simple pulse on NRST" ""
CHSB_IRHEN.LOW: CHOOSEBOX "Internal reset drives NRST pin low" ""
POS 1. 22. 67. 6.
BOX "Protected zones"
POS 3. 23. 12. 1.
TEXT "PCROP zone A:"
POS 15. 23. 11. 1.
PCROP1A_START: EDIT "" ""
POS 27. 23. 1. 1.
TEXT "-"
POS 29. 23. 11. 1.
PCROP1A_END: EDIT "" ""
POS 42. 23. 22. 1.
CHK_PCROP_RDP: CHECKBOX "PCROP zone is erased by mass erase" ""
POS 3. 24. 12. 1.
TEXT "PCROP zone B:"
POS 15. 24. 11. 1.
PCROP1B_START: EDIT "" ""
POS 27. 24. 1. 1.
TEXT "-"
POS 29. 24. 11. 1.
PCROP1B_END: EDIT "" ""
POS 3. 25. 12. 1.
TEXT "WRP zone A:"
POS 15. 25. 11. 1.
WRP1A_START: EDIT "" ""
POS 27. 25. 1. 1.
TEXT "-"
POS 29. 25. 11. 1.
WRP1A_END: EDIT "" ""
POS 3. 26. 12. 1.
TEXT "WRP zone B:"
POS 15. 26. 11. 1.
WRP1B_START: EDIT "" ""
POS 27. 26. 1. 1.
TEXT "-"
POS 29. 26. 11. 1.
WRP1B_END: EDIT "" ""
POS 42. 26. 18. 1.
TEXT "Number of securable flash pages"
POS 60. 26. 4. 1.
SEC_SIZE: EDIT "" ""
POS 1. 28. 10. 1.
BUTTON "Program flash" "GOSUB ProgramFlashSettings"
POS 20. 28. 10. 1.
BUTTON "Reset device" "GOSUB ActivateFlashSettings"
POS 39. 28. 10. 1.
BUTTON "Refresh" "GOSUB UpdateWindowFromFlashContents"
POS 58. 28. 10. 1.
BUTTON "Exit" "CONTinue"
CLOSE "CONTinue"
)
; Disable/Enable the check boxes
GOSUB UpdateWindowFromFlashContents
STOP
DIALOG.END
ENDDO
)
SelectNoDebug:
(
PRIVATE &result
IF &OptByte_RDP!=0xCC
(
GOSUB QueryNoDebug
ENTRY &result
IF !&result
(
IF &OptByte_RDP==0xAA
DIALOG.Set CHSB_RDP.OFF "ON"
ELSE IF &OptByte_RDP==0xCC
DIALOG.Set CHSB_RDP.NODEBUG "ON"
ELSE
DIALOG.Set CHSB_RDP.ON "ON"
)
)
RETURN
)
; --------------------------------------------------------------------------------
; Read out option bytes and set dialog entries
UpdateWindowFromFlashContents:
(
GOSUB ReadOptionBytes
; Get protection option bits
PRIVATE &bitnum &bytenum &bitindex &startadr &endadr
&bitnum=0.
&bytenum=1.
&bitindex=0.
; Get read protection
IF &OptByte_RDP==0xAA
DIALOG.Set CHSB_RDP.OFF "ON"
ELSE IF &OptByte_RDP==0xCC
DIALOG.Set CHSB_RDP.NODEBUG "ON"
ELSE
DIALOG.Set CHSB_RDP.ON "ON"
; Get user option byte settings
IF (&OptByte_USER&0x1)==0
DIALOG.Set CHSB_BOREN.POR "ON"
ELSE
DIALOG.Set CHSB_BOREN.BOR "ON"
IF ((&OptByte_USER>>1)&0x3)==0x0
DIALOG.Set COMB_BORLEVF "Level 1:threshold around 2.0 V"
ELSE IF ((&OptByte_USER>>1)&0x3)==0x1
DIALOG.Set COMB_BORLEVF "Level 2:threshold around 2.2 V"
ELSE IF ((&OptByte_USER>>1)&0x3)==0x2
DIALOG.Set COMB_BORLEVF "Level 3:threshold around 2.5 V"
ELSE
DIALOG.Set COMB_BORLEVF "Level 4:threshold around 2.8 V"
IF ((&OptByte_USER>>3)&0x3)==0x0
DIALOG.Set COMB_BORLEVR "Level 1:threshold around 2.1 V"
ELSE IF ((&OptByte_USER>>1)&0x3)==0x1
DIALOG.Set COMB_BORLEVR "Level 2:threshold around 2.3 V"
ELSE IF ((&OptByte_USER>>1)&0x3)==0x2
DIALOG.Set COMB_BORLEVR "Level 3:threshold around 2.6 V"
ELSE
DIALOG.Set COMB_BORLEVR "Level 4:threshold around 2.9 V"
IF ((&OptByte_USER>>5.)&0x1)==1
DIALOG.Set CHK_RST_STOP "OFF"
ELSE
DIALOG.Set CHK_RST_STOP "ON"
IF ((&OptByte_USER>>6.)&0x1)==1
DIALOG.Set CHK_RST_STDBY "OFF"
ELSE
DIALOG.Set CHK_RST_STDBY "ON"
IF ((&OptByte_USER>>7.)&0x1)==1
DIALOG.Set CHK_NRSTS_SHDW "OFF"
ELSE
DIALOG.Set CHK_NRSTS_SHDW "ON"
IF ((&OptByte_USER>>8.)&0x1)==1
DIALOG.Set CHSB_WDG.SW "ON"
ELSE
DIALOG.Set CHSB_WDG.HW "ON"
IF ((&OptByte_USER>>9.)&0x1)==1
DIALOG.Set CHK_WDG_STOP "OFF"
ELSE
DIALOG.Set CHK_WDG_STOP "ON"
IF ((&OptByte_USER>>10.)&0x1)==1
DIALOG.Set CHK_WDG_STDBY "OFF"
ELSE
DIALOG.Set CHK_WDG_STDBY "ON"
IF ((&OptByte_USER>>11.)&0x1)==1
DIALOG.Set CHSB_WWDG.SW "ON"
ELSE
DIALOG.Set CHSB_WWDG.HW "ON"
IF ((&OptByte_USER>>14.)&0x1)==1
DIALOG.Set CHK_RAM_PARITY_CHECK_DIS "ON"
ELSE
DIALOG.Set CHK_RAM_PARITY_CHECK_DIS "OFF"
IF ((&OptByte_USER>>16.)&0x1)==1
DIALOG.Set CHSB_BOOTSEL.OPT "ON"
ELSE
DIALOG.Set CHSB_BOOTSEL.PIN "ON"
IF ((&OptByte_USER>>17.)&0x1)==1
DIALOG.Set CHSB_NBOOT1.SYSMEM "ON"
ELSE
DIALOG.Set CHSB_NBOOT1.SRAM "ON"
IF ((&OptByte_USER>>18.)&0x1)==1
DIALOG.Set CHK_NBOOT0 "ON"
ELSE
DIALOG.Set CHK_NBOOT0 "OFF"
IF ((&OptByte_USER>>19.)&0x3)==0x1
DIALOG.Set CHSB_NRST.RESETIN "ON"
ELSE
(
IF ((&OptByte_USER>>19.)&0x3)==0x2
DIALOG.Set CHSB_NRST.GPIO "ON"
ELSE
DIALOG.Set CHSB_NRST.BIDIRECT "ON"
)
IF ((&OptByte_USER>>21.)&0x1)==1
DIALOG.Set CHSB_IRHEN.LOW "ON"
ELSE
DIALOG.Set CHSB_IRHEN.PULSE "ON"
IF (&OptByte_PCROP1A_START<&OptByte_PCROP1A_END)
(
&startadr=&FlashAddress+(&OptByte_PCROP1A_START*&pcrop_granularity)
&endadr=&FlashAddress+((&OptByte_PCROP1A_END+1)*&pcrop_granularity)-1
)
IF (&OptByte_PCROP1A_START==&OptByte_PCROP1A_END)
(
&startadr=&FlashAddress
&endadr=&FlashAddress+&FlashSize-0x1
)
IF (&OptByte_PCROP1A_START<=&OptByte_PCROP1A_END)
(
DIALOG.Set PCROP1A_START "&startadr"
DIALOG.Set PCROP1A_END "&endadr"
)
IF (&OptByte_PCROP_RDP)==1
DIALOG.Set CHK_PCROP_RDP "ON"
ELSE
DIALOG.Set CHK_PCROP_RDP "OFF"
IF (&OptByte_PCROP1B_START<&OptByte_PCROP1B_END)
(
&startadr=&FlashAddress+(&OptByte_PCROP1B_START*&pcrop_granularity)
&endadr=&FlashAddress+((&OptByte_PCROP1B_END+1)*&pcrop_granularity)-1
)
IF (&OptByte_PCROP1B_START==&OptByte_PCROP1B_END)
(
&startadr=&FlashAddress
&endadr=&FlashAddress+&FlashSize-0x1
)
IF (&OptByte_PCROP1B_START<=&OptByte_PCROP1B_END)
(
DIALOG.Set PCROP1B_START "&startadr"
DIALOG.Set PCROP1B_END "&endadr"
)
IF (&OptByte_WRP1A_START==&OptByte_WRP1A_END)
(
&startadr=&FlashAddress
&endadr=&FlashAddress+&FlashSize-0x1
)
IF (&OptByte_WRP1A_START<&OptByte_WRP1A_END)
(
&startadr=&FlashAddress+(&OptByte_WRP1A_START*&wrp_granularity)
&endadr=&FlashAddress+((&OptByte_WRP1A_END+1)*&wrp_granularity)-1
)
IF (&OptByte_WRP1A_START<=&OptByte_WRP1A_END)
(
DIALOG.Set WRP1A_START "&startadr"
DIALOG.Set WRP1A_END "&endadr"
)
IF (&OptByte_WRP1B_START==&OptByte_WRP1B_END)
(
&startadr=&FlashAddress
&endadr=&FlashAddress+&FlashSize-0x1
)
IF (&OptByte_WRP1B_START<&OptByte_WRP1B_END)
(
&startadr=&FlashAddress+(&OptByte_WRP1B_START*&wrp_granularity)
&endadr=&FlashAddress+((&OptByte_WRP1B_END+1)*&wrp_granularity)-1
)
IF (&OptByte_WRP1B_START<=&OptByte_WRP1B_END)
(
DIALOG.Set WRP1B_START "&startadr"
DIALOG.Set WRP1B_END "&endadr"
)
IF (&OptByte_BOOT_LOCK)==1
DIALOG.Set CHK_BOOT_LOCK "ON"
ELSE
DIALOG.Set CHK_BOOT_LOCK "OFF"
DIALOG.Set SEC_SIZE "&OptByte_SEC_SIZE"
RETURN
)
; --------------------------------------------------------------------------------
; Check user data value
QueryNoDebug:
PRIVATE &result
DIALOG.YESNO "Are you really sure you want to disable DEBUG mode?" "Read protection level 2 cannot be removed at all:" "I T I S A N I R R E V E R S I B L E O P E R A T I O N !"
ENTRY &result
RETURN &result
; --------------------------------------------------------------------------------
; Programming Option Bytes
ProgramFlashSettings:
(
PRIVATE &value &programFlash
&programFlash=FALSE()
; Set read protection option byte
IF (DIALOG.BOOLEAN("CHSB_RDP.OFF")&&(&OptByte_RDP!=0xAA))
(
&OptByte_RDP=0xAA
&programFlash=TRUE()
)
ELSE IF DIALOG.BOOLEAN("CHSB_RDP.NODEBUG")
(
PRIVATE &result
GOSUB QueryNoDebug
ENTRY &result
IF &result
(
&OptByte_RDP=0xCC
&programFlash=TRUE()
)
ELSE
(
PRINT %ERROR "Option byte programming aborted"
RETURN
)
)
ELSE IF (DIALOG.BOOLEAN("CHSB_RDP.ON")&&(&OptByte_RDP!=0x00))
(
&OptByte_RDP=0x00
&programFlash=TRUE()
)
; Set user option bytes
PRIVATE &exist_user
&exist_user=&OptByte_USER
IF DIALOG.BOOLEAN(CHSB_BOREN.BOR)
&OptByte_USER=&OptByte_USER|0x1
ELSE
&OptByte_USER=&OptByte_USER&~0x1
&OptByte_USER=&OptByte_USER&~(0xf<<1.) //mask out values for BORLEVF/BORLEVR
IF DIALOG.STRING("COMB_BORLEVF")=="Level 1:threshold around 2.0 V"
&value=0x0
ELSE IF DIALOG.STRING("COMB_BORLEVF")=="Level 2:threshold around 2.2 V"
&value=0x1
ELSE IF DIALOG.STRING("COMB_BORLEVF")=="Level 3:threshold around 2.5 V"
&value=0x2
ELSE
&value=0x3
&OptByte_USER=&OptByte_USER|(&value<<1.)
IF DIALOG.STRING("COMB_BORLEVR")=="Level 1:threshold around 2.1 V"
&value=0x0
ELSE IF DIALOG.STRING("COMB_BORLEVR")=="Level 2:threshold around 2.3 V"
&value=0x1
ELSE IF DIALOG.STRING("COMB_BORLEVR")=="Level 3:threshold around 2.6 V"
&value=0x2
ELSE
&value=0x3
&OptByte_USER=&OptByte_USER|(&value<<3.)
IF DIALOG.BOOLEAN("CHK_RST_STOP")
&OptByte_USER=&OptByte_USER&~(0x1<<5.)
ELSE
&OptByte_USER=&OptByte_USER|(0x1<<5.)
IF DIALOG.BOOLEAN("CHK_RST_STDBY")
&OptByte_USER=&OptByte_USER&~(0x1<<6.)
ELSE
&OptByte_USER=&OptByte_USER|(0x1<<6.)
IF DIALOG.BOOLEAN("CHK_NRSTS_SHDW")
&OptByte_USER=&OptByte_USER&~(0x1<<7.)
ELSE
&OptByte_USER=&OptByte_USER|(0x1<<7.)
IF DIALOG.BOOLEAN(CHSB_WDG.SW)
&OptByte_USER=&OptByte_USER|(0x1<<8.)
ELSE
&OptByte_USER=&OptByte_USER&~(0x1<<8.)
IF DIALOG.BOOLEAN("CHK_WDG_STOP")
&OptByte_USER=&OptByte_USER&~(0x1<<9.)
ELSE
&OptByte_USER=&OptByte_USER|(0x1<<9.)
IF DIALOG.BOOLEAN("CHK_WDG_STDBY")
&OptByte_USER=&OptByte_USER&~(0x1<<10.)
ELSE
&OptByte_USER=&OptByte_USER|(0x1<<10.)
IF DIALOG.BOOLEAN(CHSB_WWDG.SW)
&OptByte_USER=&OptByte_USER|(0x1<<11.)
ELSE
&OptByte_USER=&OptByte_USER&~(0x1<<11.)
IF DIALOG.BOOLEAN("CHK_RAM_PARITY_CHECK_DIS")
&OptByte_USER=&OptByte_USER|(0x1<<14.)
ELSE
&OptByte_USER=&OptByte_USER&~(0x1<<14.)
IF DIALOG.BOOLEAN("CHSB_BOOTSEL.OPT")
&OptByte_USER=&OptByte_USER|(0x1<<16.)
ELSE
&OptByte_USER=&OptByte_USER&~(0x1<<16.)
IF DIALOG.BOOLEAN("CHSB_NBOOT1.SYSMEM")
&OptByte_USER=&OptByte_USER|(0x1<<17.)
ELSE
&OptByte_USER=&OptByte_USER&~(0x1<<17.)
IF DIALOG.BOOLEAN("CHK_NBOOT0")
&OptByte_USER=&OptByte_USER|(0x1<<18.)
ELSE
&OptByte_USER=&OptByte_USER&~(0x1<<18.)
&OptByte_USER=&OptByte_USER&~(0x3<<19.)
IF DIALOG.BOOLEAN("CHSB_NRST.RESETIN")
&OptByte_USER=&OptByte_USER|(0x1<<19.)
ELSE
(
IF DIALOG.BOOLEAN("CHSB_NRST.GPIO")
&OptByte_USER=&OptByte_USER|(0x2<<19.)
ELSE
&OptByte_USER=&OptByte_USER|(0x3<<19.)
)
IF DIALOG.BOOLEAN("CHSB_IRHEN.LOW")
&OptByte_USER=&OptByte_USER|(0x1<<21.)
ELSE
&OptByte_USER=&OptByte_USER&~(0x1<<21.)
IF (&OptByte_USER!=&exist_user)
&programFlash=TRUE()
IF DIALOG.STRing(PCROP1A_START)!=""
(
&value=DIALOG.STRing(PCROP1A_START)
&value=(&value-&FlashAddress)/&pcrop_granularity
)
ELSE
&value=0xFF
IF (&OptByte_PCROP1A_START!=&value)
(
&OptByte_PCROP1A_START=&value
&programFlash=TRUE()
)
IF DIALOG.STRing(PCROP1A_END)!=""
(
&value=DIALOG.STRing(PCROP1A_END)
&value=((&value-&FlashAddress+1)/&pcrop_granularity)-1
)
ELSE
(
&value=0x0
)
IF (&OptByte_PCROP1A_END!=&value)
(
&OptByte_PCROP1A_END=&value
&programFlash=TRUE()
)
IF DIALOG.BOOLEAN("CHK_PCROP_RDP")
&value=0x80000000
ELSE
&value=0x0
IF (&OptByte_PCROP_RDP!=&value)
(
&OptByte_PCROP_RDP=&value
&programFlash=TRUE()
)
IF DIALOG.STRing(PCROP1B_START)!=""
(
&value=DIALOG.STRing(PCROP1B_START)
&value=(&value-&FlashAddress)/&pcrop_granularity
)
ELSE
&value=0xFF
IF (&OptByte_PCROP1B_START!=&value)
(
&OptByte_PCROP1B_START=&value
&programFlash=TRUE()
)
IF DIALOG.STRing(PCROP1B_END)!=""
(
&value=DIALOG.STRing(PCROP1B_END)
&value=((&value-&FlashAddress+1)/&pcrop_granularity)-1
)
ELSE
&value=0x0
IF (&OptByte_PCROP1B_END!=&value)
(
&OptByte_PCROP1B_END=&value
&programFlash=TRUE()
)
IF DIALOG.BOOLEAN(CHK_BOOT_LOCK)
&value=0x1
ELSE
&value=0x0
IF (&OptByte_BOOT_LOCK!=&value)
(
&OptByte_BOOT_LOCK=&value
&programFlash=TRUE()
)
IF DIALOG.STRing(WRP1A_START)!=""
(
&value=DIALOG.STRing(WRP1A_START)
&value=(&value-&FlashAddress)/&wrp_granularity
)
ELSE
&value=0xFF
IF (&OptByte_WRP1A_START!=&value)
(
&OptByte_WRP1A_START=&value
&programFlash=TRUE()
)
IF DIALOG.STRing(WRP1A_END)!=""
(
&value=DIALOG.STRing(WRP1A_END)
&value=((&value-&FlashAddress+1)/&wrp_granularity)-1
)
ELSE
&value=0x0
IF (&OptByte_WRP1A_END!=&value)
(
&OptByte_WRP1A_END=&value
&programFlash=TRUE()
)
IF DIALOG.STRing(WRP1B_START)!=""
(
&value=DIALOG.STRing(WRP1B_START)
&value=(&value-&FlashAddress)/&wrp_granularity
)
ELSE
&value=0xFF
IF (&OptByte_WRP1B_START!=&value)
(
&OptByte_WRP1B_START=&value
&programFlash=TRUE()
)
IF DIALOG.STRing(WRP1B_END)!=""
(
&value=DIALOG.STRing(WRP1B_END)
&value=((&value-&FlashAddress+1)/&wrp_granularity)-1
)
ELSE
&value=0x0
IF (&OptByte_WRP1B_END!=&value)
(
&OptByte_WRP1B_END=&value
&programFlash=TRUE()
)
IF DIALOG.STRing(SEC_SIZE)!=""
&value=DIALOG.STRing(SEC_SIZE)
ELSE
&value=0x0
IF (&OptByte_SEC_SIZE!=&value)
(
&OptByte_SEC_SIZE=&value
&programFlash=TRUE()
)
IF &programFlash==TRUE()
GOSUB ProgramOptionBytes
RETURN
)
; --------------------------------------------------------------------------------
; Activate programmed flash settings by resetting device
ActivateFlashSettings:
(
GOSUB ResetDevice
GOSUB UpdateWindowFromFlashContents
RETURN
)
; --------------------------------------------------------------------------------
; Reset device
ResetDevice:
(
PRIVATE &cr
&cr=Data.Long(&FlashRegBase+0x14)
; Unlock the Flash Control Register
IF ((&cr&0x80000000)==0x80000000)
(
Data.Set &FlashRegBase+0x08 %Long 0x45670123 // FLASH->KEYR = FLASH_KEY1;
Data.Set &FlashRegBase+0x08 %Long 0xCDEF89AB // FLASH->KEYR = FLASH_KEY2;
)
; Authorize the small information block programming
IF ((&cr&0x40000000)==0x40000000)
(
Data.Set &FlashRegBase+0xC %Long 0x08192A3B // FLASH->OPTKEYR = OPTKEY1;
Data.Set &FlashRegBase+0xC %Long 0x4C5D6E7F // FLASH->OPTKEYR = OPTKEY2;
)
; Set OBL_LAUNCH to power down core (necessary for loading option bytes into Flash registers)
ON.ERROR CONTINUE
Data.Set &FlashRegBase+0x14 %Long &cr|(1.<<27.)
ON.ERROR
WAIT 0.1s
IF (SYStem.UP())
BREAK
ELSE
SYStem.UP
RETURN
)
; --------------------------------------------------------------------------------
; Read option byte values out of flash
; Note : Changed due to stm32fxx-optionbyte script :
; Read option bytes out of flash, because Flash registers will be updated
; after next core reset (done by setting OBL_LAUNCH in FLASH_CR). After
; programming the option bytes, they can be checked on sd:0x1FF80000 and
; can be reprogrammed again.
ReadOptionBytes:
(
PRIVATE &TarOptByte_0 &TarOptByte_1 &TarOptByte_2 &TarOptByte_3
PRIVATE &TarOptByte_4 &TarOptByte_5 &TarOptByte_6 &TarOptByte_7
&TarOptByte_0=Data.Long(D:0x1FFF7800)
&TarOptByte_1=Data.Long(D:0x1FFF7808)
&TarOptByte_2=Data.Long(D:0x1FFF7810)
&TarOptByte_3=Data.Long(D:0x1FFF7818)
&TarOptByte_4=Data.Long(D:0x1FFF7820)
&TarOptByte_5=Data.Long(D:0x1FFF7828)
&TarOptByte_6=Data.Long(D:0x1FFF7830)
&TarOptByte_7=Data.Long(D:0x1FFF7870)
&OptByte_RDP=&TarOptByte_0&0x000000FF
&OptByte_USER=&TarOptByte_0>>8.
&OptByte_PCROP1A_START=&TarOptByte_1&0xFF
&OptByte_PCROP1A_END=&TarOptByte_2&0xFF
&OptByte_PCROP_RDP=&TarOptByte_2>>31.
&OptByte_WRP1A_START=&TarOptByte_3&0x3F
&OptByte_WRP1A_END=(&TarOptByte_3>>16.)&0x3F
&OptByte_WRP1B_START=&TarOptByte_4&0x3F
&OptByte_WRP1B_END=(&TarOptByte_4>>16.)&0x3F
&OptByte_PCROP1B_START=&TarOptByte_5&0xFF
&OptByte_PCROP1B_END=&TarOptByte_6&0xFF
&OptByte_SEC_SIZE=&TarOptByte_7&0x7F
&OptByte_BOOT_LOCK=(&TarOptByte_7>>16.)&0x1
RETURN
)
; --------------------------------------------------------------------------------
; Program option bytes
ProgramOptionBytes:
(
PRIVATE &cr &value
&cr=Data.Long(&FlashRegBase+0x14)
; Unlock the Flash Control Register
IF ((&cr&0x80000000)==0x80000000)
(
Data.Set &FlashRegBase+0x08 %Long 0x45670123 // FLASH->KEYR = FLASH_KEY1;
Data.Set &FlashRegBase+0x08 %Long 0xCDEF89AB // FLASH->KEYR = FLASH_KEY2;
)
; Authorize the small information block programming
IF ((&cr&0x40000000)==0x40000000)
(
Data.Set &FlashRegBase+0xC %Long 0x08192A3B // FLASH->OPTKEYR = OPTKEY1;
Data.Set &FlashRegBase+0xC %Long 0x4C5D6E7F // FLASH->OPTKEYR = OPTKEY2;
)
;Clear all pending flags
Data.Set &FlashRegBase+0x10 %Long 0x0000C3FB // FLASH->SR = OPTVERR | RDERR | FASTERR | MISERR | PGSERR | PGAERR | SIZERR | WRPERR | PROGERR | OPERR | EOP
;Write new option values into FLASH->OPTR, PCROP1A,... registers
&value=&OptByte_RDP|(&OptByte_USER<<8.)
Data.Set &FlashRegBase+0x20 %Long &value
Data.Set &FlashRegBase+0x24 %Long &OptByte_PCROP1A_START
Data.Set &FlashRegBase+0x28 %Long &OptByte_PCROP1A_END|&OptByte_PCROP_RDP
Data.Set &FlashRegBase+0x2C %Long &OptByte_WRP1A_START|(&OptByte_WRP1A_END<<16.)
Data.Set &FlashRegBase+0x30 %Long &OptByte_WRP1B_START|(&OptByte_WRP1B_END<<16.)
Data.Set &FlashRegBase+0x34 %Long &OptByte_PCROP1B_START
Data.Set &FlashRegBase+0x38 %Long &OptByte_PCROP1B_END
Data.Set &FlashRegBase+0x80 %Long &OptByte_SEC_SIZE|(&OptByte_BOOT_LOCK<<16.)
; Wait for last operation to be completed
IF (Data.Long(&FlashRegBase+0x10)&0x00050000)!=0x0 // check that no busy flag is set (FLASH_FLAG_BSY | CFGBSY)
(
PRINT %ERROR "Flash memory interface busy, operation not started"
RETURN
)
;Start programming of option bytes
Data.Set &FlashRegBase+0x14 %Long 0x00020000 // FLASH->CR = OPTSTRT;
; Wait for last operation to be completed
WHILE (Data.Long(&FlashRegBase+0x10)&0x00050000)==0x00050000 // while ((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
(
)
; Reset device (button in dialogue or param RESETDEVICE) to activate option bytes
; restore FLASH_CR register
Data.Set &FlashRegBase+0x14 %Long &cr
RETURN
)
Reference in New Issue View Git Blame Copy Permalink