144 lines
5.1 KiB
Plaintext
144 lines
5.1 KiB
Plaintext
; --------------------------------------------------------------------------------
|
|
; @Title: Flash declaration for Nordic Semiconductor NRF5340QKAA-APP internal flash
|
|
; @Description:
|
|
; Script arguments:
|
|
; DO nrf5340app [PREPAREONLY] [CPU=<cpu>] [DUALPORT=<0|1>]
|
|
; PREPAREONLY only declares flash but does not execute flash programming
|
|
; CPU=<cpu> selects CPU derivative <cpu>
|
|
; DUALPORT=<0|1> use dual port memory access, default 1
|
|
; MASSERASE forces mass erase of device before establishing debug
|
|
; connection
|
|
; Mass erase erases code flash and UICR registers
|
|
; Example:
|
|
; DO ~~/demo/arm/flash/nrf5340app PREPAREONLY
|
|
; Note:
|
|
; This file must NOT be modified.
|
|
; This file is intended to stay within TRACE32 installation.
|
|
; Usage examples are available in the ~~/demo/arm/hardware/... subdirectories.
|
|
;
|
|
; CPU-Type Flash Addr RamSize Addr
|
|
; --------------------------------------------------------------------------------
|
|
; NRF5340QKAA-APP 1 MB 0x00000000 256 KB 0x20000000
|
|
;
|
|
; @Chip: NRF5340QKAA
|
|
; @Author: PHI, BWR
|
|
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
|
|
; --------------------------------------------------------------------------------
|
|
; $Rev: 10516 $
|
|
; $Id: nrf5340app.cmm 10516 2022-02-02 11:39:30Z bschroefel $
|
|
|
|
PRIVATE ¶meters
|
|
ENTRY %LINE ¶meters
|
|
|
|
PRIVATE ¶m_prepareonly ¶m_cpu ¶m_dualport
|
|
¶meters=STRing.UPpeR("¶meters")
|
|
¶m_prepareonly=(STRing.SCAN("¶meters","PREPAREONLY",0)!=-1)
|
|
¶m_cpu=STRing.SCANAndExtract("¶meters","CPU=","")
|
|
¶m_dualport=STRing.SCANAndExtract("¶meters","DUALPORT=","1")
|
|
¶m_masserase=(STRing.SCAN("¶meters","MASSERASE",0)!=-1)
|
|
|
|
; --------------------------------------------------------------------------------
|
|
; Initialize and start the debugger
|
|
IF !SYStem.Up()||¶m_masserase
|
|
(
|
|
SYStem.RESet
|
|
|
|
IF "¶m_cpu"!=""
|
|
SYStem.CPU ¶m_cpu
|
|
IF !CPUIS(NRF5340QKAA-APP)
|
|
SYStem.CPU NRF5340QKAA-APP
|
|
|
|
SYStem.MemAccess DAP
|
|
|
|
IF ¶m_masserase
|
|
FLASH.UNSECUREerase
|
|
|
|
SYStem.Up
|
|
)
|
|
|
|
; --------------------------------------------------------------------------------
|
|
; disable MPU
|
|
Data.Set ZSD:0xE000ED94 %Long (Data.Long(ZSD:0xE000ED94)&(~0x1)) ; disable MPU
|
|
|
|
|
|
; --------------------------------------------------------------------------------
|
|
; Flash declaration
|
|
FLASH.RESet
|
|
GOSUB FlashDeclaration "¶m_dualport"
|
|
|
|
; Flash script ends here if called with parameter PREPAREONLY
|
|
IF ¶m_prepareonly
|
|
ENDDO PREPAREDONE
|
|
|
|
; --------------------------------------------------------------------------------
|
|
; Flash programming example
|
|
DIALOG.YESNO "Program flash memory?"
|
|
PRIVATE &progflash
|
|
ENTRY &progflash
|
|
IF &progflash
|
|
(
|
|
FLASH.ReProgram ALL /Erase
|
|
Data.LOAD.auto *
|
|
FLASH.ReProgram OFF
|
|
|
|
; Reset device
|
|
SYStem.Down
|
|
SYStem.Up
|
|
)
|
|
|
|
ENDDO
|
|
|
|
; --------------------------------------------------------------------------------
|
|
; SUBROUTINES
|
|
|
|
; --------------------------------------------------------------------------------
|
|
; Flash declaration depending on selected CPU
|
|
;
|
|
; Please do NOT modify the TRACE32 flash declaration.
|
|
;
|
|
; Modifications can result in unpredictable behavior.
|
|
; Please contact support@lauterbach.com for any changes.
|
|
FlashDeclaration: ;(param_dualport)
|
|
(
|
|
PARAMETERS ¶m_dualport
|
|
PRIVATE &secured
|
|
|
|
; Read out security mode of the core
|
|
IF ((Register(NS)&0x1)==0x0)
|
|
&secured=0x1
|
|
ELSE
|
|
&secured=0x0
|
|
|
|
; Declare code flash and OTP area of UICR
|
|
FLASH.Create 1. 0x00000000++(0x100000-0x1) 0x1000 TARGET long &secured
|
|
|
|
; Declare UICR registers
|
|
; Program UICR data with care. An erased UICR should still allow debugger access.
|
|
;
|
|
|
|
; 1. FLASH.CHANGEtype address-range TARGET
|
|
; 2. FLASH.Program address-range /OTP
|
|
; 3. program UICR data
|
|
; 4. FLASH.CHANGEtype address-range NOP
|
|
|
|
FLASH.Create 1. 0x00FF8000++0x3 0x4 NOP Long &secured /OTP /info "UICR : APROTECT"
|
|
FLASH.Create 1. 0x00FF800C++0x3 0x4 NOP Long &secured /OTP /info "UICR : EXTSUPPLY"
|
|
FLASH.Create 1. 0x00FF8010++0x3 0x4 NOP Long &secured /OTP /info "UICR : VREGHVOUT"
|
|
FLASH.Create 1. 0x00FF8014++0x3 0x4 NOP Long &secured /OTP /info "UICR : HFXOCNT"
|
|
FLASH.Create 1. 0x00FF801C++0x3 0x4 NOP Long &secured /OTP /info "UICR : SECUREAPPROTECT"
|
|
FLASH.Create 1. 0x00FF8020++0x3 0x4 NOP Long &secured /OTP /info "UICR : ERASEPROTECT"
|
|
FLASH.Create 1. 0x00FF8024++0x3 0x4 NOP Long &secured /OTP /info "UICR : TINSTANCE"
|
|
FLASH.Create 1. 0x00FF8028++0x3 0x4 NOP Long &secured /OTP /info "UICR : NFCPINS"
|
|
FLASH.Create 1. 0x00FF8100++(192.*4.-1.) TARGET Long &secured /OTP /info "UICR : OTP"
|
|
FLASH.Create 1. 0x00FF8400++(128.*8.-1.) NOP Long &secured /OTP /info "UICR KEYSLOT.CONFIG.DEST and PERM"
|
|
FLASH.Create 1. 0x00FF8800++(128.*16.-1.) NOP Long &secured /OTP /info "UICR : KEYSLOT.KEY.VALUE"
|
|
|
|
; DualPort leads to bus error when writing multiple flash pages
|
|
;IF (("¶m_dualport"!="1")||SYStem.ACCESS.DENIED())
|
|
FLASH.TARGET 0x20000000 0x20001000 0x1000 ~~/demo/arm/flash/long/nrf5340app.bin
|
|
;ELSE
|
|
; FLASH.TARGET 0x20000000 E:0x20001000 0x1000 ~~/demo/arm/flash/long/nrf5340app.bin /DualPort
|
|
|
|
RETURN
|
|
)
|