Files
2025-10-14 09:52:32 +09:00

133 lines
4.1 KiB
Plaintext

; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of Atmel AT91SAM7X internal flash.
;
; @Description:
; Script arguments:
;
; DO at91sam7x [PREPAREONLY]
;
; PREPAREONLY only declares flash but does not execute flash programming
;
; Example:
;
; DO ~~/demo/arm/flash/at91sam7x PREPAREONLY
;
; List of AT91SAM7X derivatives and their configuration:
;
; CPU-Type FlashSize Pagesize SRAM size Algorithm
; (Byte) (Byte) (Byte)
; --------------------------------------------------------------------------------
; AT91SAM7X128 0x20000 0x100 0x8000 efcs2.bin
; AT91SAM7XC128 0x20000 0x100 0x8000 efcs2.bin
; AT91SAM7X256 0x40000 0x100 0x10000 efcs2.bin
; AT91SAM7XC256 0x40000 0x100 0x10000 efcs2.bin
; AT91SAM7X512 0x80000 0x100 0x20000 efcs2.bin
; AT91SAM7XC512 0x80000 0x100 0x20000 efcs2.bin
;
; The flash is divided into pages of 256 Byte.
;
; The internal flash is located at 0x00100000.
; The internal SRAM is located at 0x00200000.
;
; Beginning at address 0x0 is located internal flash before remap command
; or internal SRAM after remap command.
;
; HINTS:
;
; Locked pages can be unlocked with FLASH.UNLOCK command and can be
; locked again with FLASH.LOCK command.
;
; Watchdog is critical for flash programming. The flash algorithm is
; serving the watchdog if the watchdog is not used in window mode.
;
; If the watchdog is setup to window mode by a running application
; the watchdog should be either disabled after first power-up or the
; board should be power-up before every flash programming. If the
; watchdog is disabled after power-up it cannot be enabled again by
; the application because WDT_MR register is write once. Please see
; below the command to disable the watchdog.
;
; GPNVM bit values can be changed via at91sam7-nvm.cmm script.
;
; @Author: WRD
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: AT91SAM7*
; --------------------------------------------------------------------------------
; $Rev: 12049 $
; $Id: at91sam7x.cmm 12049 2023-04-20 12:32:16Z bschroefel $
LOCAL &parameters
ENTRY %LINE &parameters
LOCAL &param_prepareonly
&param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
; --------------------------------------------------------------------------------
; Configuration information
;
; Setup the configuration information out of the table above.
;
; Example for AT91SAM7X256
&flashstart=0x00100000
&flashsize=0x40000
&pagesize=0x100
&flashalgorithm="~~/demo/arm/flash/long/efcs2.bin"
; --------------------------------------------------------------------------------
; Setup CPU
IF SYStem.MODE()<5
(
SYStem.RESet
SYStem.CPU AT91SAM7X256
SYStem.Up
)
; Disable watchdog for flash programming if watchdog may be used in
; window mode.
;DATA.SET 0xFFFFFD44 %LONG DATA.LONG(ASD:0xFFFFFD44)|0x00008000
; --------------------------------------------------------------------------------
; Flash declaration
FLASH.RESet
IF &flashsize<=0x40000
(
FLASH.Create 1. &flashstart++(&flashsize-1) &pagesize TARGET Long
)
ELSE
(
; Bank EFC0
FLASH.Create 1. &flashstart++0x3ffff &pagesize TARGET Long 0.
; Bank EFC1
FLASH.Create 2. (&flashstart+0x40000)++(&flashsize-0x40000-1) &pagesize TARGET Long 1.
)
FLASH.TARGET 0x00200000 0x00200800 0x1000 &flashalgorithm
; Flash script ends here if called with parameter PREPAREONLY
IF &param_prepareonly
ENDDO PREPAREDONE
; --------------------------------------------------------------------------------
; Flash NVM bit programming example
DIALOG.YESNO "Program flash NVM bits"
ENTRY &prognvm
IF &prognvm
(
DO ~~~~/at91sam7-nvm
)
; --------------------------------------------------------------------------------
; Flash programming example
DIALOG.YESNO "Program flash memory?"
ENTRY &progflash
IF !&progflash
ENDDO
; Unlock locked pages if necessary
;FLASH.UNLOCK ALL
FLASH.Erase.ALL
FLASH.Program.ALL
Data.LOAD.auto * /Long
FLASH.Program.off
ENDDO