; -------------------------------------------------------------------------------- ; @Title: EFM32GG12 On-Chip Peripherals ; @Props: Released ; @Author: KMB, ADR ; @Changelog: 2021-05-18 KMB ; 2022-01-28 ADR ; @Manufacturer: SILICONLABS - Silicon Laboratories Inc. ; @Doc: SVD Generated, based on: EFM32GG12*.svd (ver. 3.1.0) ; @Core: Cortex-M4F ; @Chip: EFM32GG12B110F1024, EFM32GG12B130F512, EFM32GG12B310F1024, ; EFM32GG12B330F512, EFM32GG12B410F1024, EFM32GG12B430F512, ; EFM32GG12B510F1024, EFM32GG12B530F512, EFM32GG12B830F512, ; EFM32GG12B810F1024 ; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: perefm32gg12.per 17736 2024-04-08 09:26:07Z kwisniewski $ tree.close "Core Registers (Cortex-M4F)" AUTOINDENT.PUSH AUTOINDENT.OFF tree "System Control" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 12. group.long 0x08++0x03 line.long 0x00 "ACTLR,Auxiliary Control Register" bitfld.long 0x00 9. " DISFPCA ,Disables lazy stacking of floating point context" "No,Yes" bitfld.long 0x00 8. " DISOOFP ,Disables floating point instructions completing" "No,Yes" bitfld.long 0x00 2. " DISFOLD ,Disables folding of IT instructions" "No,Yes" textline " " bitfld.long 0x00 1. " DISDEFWBUF ,Disables write buffer use during default memory map accesses" "No,Yes" bitfld.long 0x00 0. " DISMCYCINT ,Disables interruption of multi-cycle instructions" "No,Yes" group.long 0x10++0x0B line.long 0x00 "SYST_CSR,SysTick Control and Status Register" rbitfld.long 0x00 16. " COUNTFLAG ,Counter Flag" "Not counted,Counted" bitfld.long 0x00 2. " CLKSOURCE ,SysTick clock source" "External,Core" bitfld.long 0x00 1. " TICKINT ,SysTick Handler" "No SysTick,SysTick" textline " " bitfld.long 0x00 0. " ENABLE ,Counter Enable" "Disabled,Enabled" line.long 0x04 "SYST_RVR,SysTick Reload Value Register" hexmask.long.tbyte 0x04 0.--23. 1. " RELOAD ,The value to load into the SYST_CVR when the counter reaches 0" line.long 0x08 "SYST_CVR,SysTick Current Value Register" rgroup.long 0x1C++0x03 line.long 0x00 "SYST_CALIB,SysTick Calibration Value Register" bitfld.long 0x00 31. " NOREF ,Indicates whether the implementation defined reference clock is implemented" "Implemented,Not implemented" bitfld.long 0x00 30. " SKEW ,Indicates whether the 10ms calibration value is exact" "Exact,Inexact" hexmask.long.tbyte 0x00 0.--23. 1. " TENMS ,Holds a reload value to be used for 10ms (100Hz) timing" rgroup.long 0xD00++0x03 line.long 0x00 "CPUID,CPU ID Base Register" hexmask.long.byte 0x00 24.--31. 1. " IMPLEMENTER ,Implementer Code" bitfld.long 0x00 20.--23. " VARIANT ,Indicates processor revision" "Revision 0,?..." bitfld.long 0x00 16.--19. " ARCHITECTURE ,Architecture" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " hexmask.long.word 0x00 4.--15. 1. " PARTNO ,Indicates part number" bitfld.long 0x00 0.--3. " REVISION ,Indicates patch release" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xD04++0x23 line.long 0x00 "ICSR,Interrupt Control State Register" bitfld.long 0x00 31. " NMIPENDSET ,Set Pending NMI Bit" "Inactive,Active" bitfld.long 0x00 28. " PENDSVSET ,Set Pending pendSV Bit" "Not pending,Pending" bitfld.long 0x00 27. " PENDSVCLR ,Removes the pending status of the PendSV exception" "No effect,Removed" textline " " bitfld.long 0x00 26. " PENDSTSET ,Set Pending SysTick Bit" "Not pending,Pending" bitfld.long 0x00 25. " PENDSTCLR ,Clear Pending SysTick Bit" "No effect,Removed" bitfld.long 0x00 23. " ISRPREEMPT ,Use Only at Debug Time" "Not active,Active" textline " " bitfld.long 0x00 22. " ISRPENDING ,Indicates whether an external interrupt" "Not pending,Pending" hexmask.long.word 0x00 12.--20. 1. " VECTPENDING ,Pending ISR Number Field" bitfld.long 0x00 11. " RETTOBASE ,Interrupt Exception" "Active,Not active" textline " " hexmask.long.word 0x00 0.--8. 1. " VECTACTIVE ,The exception number of the current executing exception" line.long 0x04 "VTOR,Vector Table Offset Register" hexmask.long 0x04 7.--31. 0x80 " TBLOFF ,Vector table address" line.long 0x08 "AIRCR,Application Interrupt and Reset Control Register" hexmask.long.word 0x08 16.--31. 1. " VECTKEY ,Register Key" rbitfld.long 0x08 15. " ENDIANESS ,Data endianness Bit" "Little,Big" bitfld.long 0x08 8.--10. " PRIGROUP ,Interrupt Priority Grouping Field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" textline " " bitfld.long 0x08 2. " SYSRESETREQ ,System Reset Request" "Not requested,Requested" bitfld.long 0x08 1. " VECTCLRACTIVE ,Clear Active Vector Bit" "No effect,Clear" bitfld.long 0x08 0. " VECTRESET ,System Reset" "No effect,Reset" line.long 0x0C "SCR,System Control Register" bitfld.long 0x0C 4. " SEVONPEND ,Determines whether an interrupt transition from inactive state to pending state is a wakeup event" "Not wakeup,Wakeup" bitfld.long 0x0C 2. " SLEEPDEEP ,Provides a qualifying hint indicating that waking from sleep might take longer" "Not deep sleep,Deep sleep" bitfld.long 0x0C 1. " SLEEPONEXIT ,Determines whether, on an exit from an ISR that returns to the base level of execution priority, the processor enters a sleep state" "Disabled,Enabled" line.long 0x10 "CCR,Configuration Control Register" bitfld.long 0x10 18. " BP ,Branch prediction enable bit" "Disabled,Enabled" bitfld.long 0x10 17. " IC ,Instruction cache enable bit" "Disabled,Enabled" bitfld.long 0x10 16. " DC ,Cache enable bit" "Disabled,Enabled" textline " " bitfld.long 0x10 9. " STKALIGN ,8-byte Stack Frame Alignment" "4-byte/no adjustment,8-byte/adjustment" bitfld.long 0x10 8. " BFHFNMIGN ,Enable NMI and Hard Fault and FAULTMASK to Ignore Bus Fault" "Disabled,Enabled" bitfld.long 0x10 4. " DIV_0_TRP ,Trap Divide by Zero" "Disabled,Enabled" textline " " bitfld.long 0x10 3. " UNALIGN_TRP ,Trap for Unaligned Access" "Disabled,Enabled" bitfld.long 0x10 1. " USERSETMPEND ,Controls whether unprivileged software can access the STIR" "Denied,Allowed" bitfld.long 0x10 0. " NONEBASETHRDENA ,Control Entry to Thread Mode" "Only from last exception,Any level" line.long 0x14 "SHPR1,SSystem Handler Priority Register 1" hexmask.long.byte 0x14 24.--31. 1. " PRI_7 ,Priority of System Handler 7" hexmask.long.byte 0x14 16.--23. 1. " PRI_6 ,Priority of system handler 6(UsageFault)" hexmask.long.byte 0x14 8.--15. 1. " PRI_5 ,Priority of system handler 5(BusFault)" textline " " hexmask.long.byte 0x14 0.--7. 1. " PRI_4 ,Priority of system handler 4(MemManage)" line.long 0x18 "SHPR2,System Handler Priority Register 2" hexmask.long.byte 0x18 24.--31. 1. " PRI_11 ,Priority of system handler 11(SVCall)" hexmask.long.byte 0x18 16.--23. 1. " PRI_10 ,Priority of System Handler 10" hexmask.long.byte 0x18 8.--15. 1. " PRI_9 ,Priority of System Handler 9" textline " " hexmask.long.byte 0x18 0.--7. 1. " PRI_8 ,Priority of System Handler 8" line.long 0x1C "SHPR3,System Handler Priority Register 3" hexmask.long.byte 0x1C 24.--31. 1. " PRI_15 ,Priority of System Handler 15(SysTick)" hexmask.long.byte 0x1C 16.--23. 1. " PRI_14 ,Priority of System Handler 14(PendSV)" hexmask.long.byte 0x1C 8.--15. 1. " PRI_13 ,Priority of System Handler 13" textline " " hexmask.long.byte 0x1C 0.--7. 1. " PRI_12 ,Priority of System Handler 12(DebugMonitor)" line.long 0x20 "SHCSR,System Handler Control and State Register" bitfld.long 0x20 18. " USGFAULTENA ,Enable UsageFault" "Disabled,Enabled" bitfld.long 0x20 17. " BUSFAULTENA ,Enable BusFault" "Disabled,Enabled" bitfld.long 0x20 16. " MEMFAULTENA ,Enable MemManage fault" "Disabled,Enabled" textline " " bitfld.long 0x20 15. " SVCALLPENDED ,SVCall is pending" "Not pending,Pending" bitfld.long 0x20 14. " BUSFAULTPENDED ,BusFault is pending" "Not pending,Pending" bitfld.long 0x20 13. " MEMFAULTPENDED ,MemManage is pending" "Not pending,Pending" textline " " bitfld.long 0x20 12. " USGFAULTPENDED ,UsageFault is pending" "Not pending,Pending" bitfld.long 0x20 11. " SYSTICKACT ,SysTick is Active" "Not active,Active" bitfld.long 0x20 10. " PENDSVACT ,PendSV is Active" "Not active,Active" textline " " bitfld.long 0x20 8. " MONITORACT ,Monitor is Active" "Not active,Active" bitfld.long 0x20 7. " SVCALLACT ,SVCall is Active" "Not active,Active" bitfld.long 0x20 3. " USGFAULTACT ,UsageFault is Active" "Not active,Active" textline " " bitfld.long 0x20 1. " BUSFAULTACT ,BusFault is Active" "Not active,Active" bitfld.long 0x20 0. " MEMFAULTACT ,MemManage is Active" "Not active,Active" group.byte 0xD28++0x1 line.byte 0x00 "MMFSR,MemManage Status Register" bitfld.byte 0x00 7. " MMARVALID ,Address Valid Flag" "Not valid,Valid" bitfld.byte 0x00 5. " MLSPERR ,A MemManage fault occurred during FP lazy state preservation" "Not occurred,Occurred" bitfld.byte 0x00 4. " MSTKERR ,tacking Access Violations" "Not occurred,Occurred" textline " " bitfld.byte 0x00 3. " MUNSTKERR ,Unstack Access Violations" "Not occurred,Occurred" bitfld.byte 0x00 1. " DACCVIOL ,Data Access Violation" "Not occurred,Occurred" bitfld.byte 0x00 0. " IACCVIOL ,Instruction Access Violation" "Not occurred,Occurred" line.byte 0x01 "BFSR,Bus Fault Status Register" bitfld.byte 0x01 7. " BFARVALID ,Address Valid Flag" "Not valid,Valid" bitfld.byte 0x01 5. " LSPERR ,A bus fault occurred during FP lazy state preservation" "Not occurred,Occurred" bitfld.byte 0x01 4. " STKERR ,Derived bus fault(exception entry)" "Not occurred,Occurred" textline " " bitfld.byte 0x01 3. " UNSTKERR ,Derived bus fault(exception return)" "Not occurred,Occurred" bitfld.byte 0x01 2. " IMPRECISERR ,Imprecise data access error" "Not occurred,Occurred" bitfld.byte 0x01 1. " PRECISERR ,Precise data access error" "Not occurred,Occurred" textline " " bitfld.byte 0x01 0. " IBUSERR ,Bus fault on an instruction prefetch" "Not occurred,Occurred" group.word 0xD2A++0x1 line.word 0x00 "USAFAULT,Usage Fault Status Register" bitfld.word 0x00 9. " DIVBYZERO ,Divide by zero error" "No error,Error" bitfld.word 0x00 8. " UNALIGNED ,Unaligned access error" "No error,Error" bitfld.word 0x00 3. " NOCP ,A coprocessor access error" "No error,Error" textline " " bitfld.word 0x00 2. " INVPC ,An integrity check error" "No error,Error" bitfld.word 0x00 1. " INVSTATE ,Invalid Combination of EPSR and Instruction" "No error,Error" bitfld.word 0x00 0. " UNDEFINSTR ,Undefined instruction error" "No error,Error" group.long 0xD2C++0x07 line.long 0x00 "HFSR,Hard Fault Status Register" bitfld.long 0x00 31. " DEBUGEVT ,Indicates when a Debug event has occurred" "Not occurred,Occurred" bitfld.long 0x00 30. " FORCED ,Indicates that a fault with configurable priority" "Not occurred,Occurred" bitfld.long 0x00 1. " VECTTBL ,Indicates when a fault has occurred because of a vector table read error on exception processing" "Not occurred,Occurred" line.long 0x04 "DFSR,Debug Fault Status Register" bitfld.long 0x04 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of EDBGRQ" "Not asserted,Asserted" bitfld.long 0x04 3. " VCATCH ,Vector Catch Flag" "Not occurred,Occurred" bitfld.long 0x04 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not occurred,Occurred" textline " " bitfld.long 0x04 1. " BKPT ,BKPT Flag" "Not executed,Executed" bitfld.long 0x04 0. " HALTED ,Indicates a debug event generated by either" "Not requested,Requested" group.long 0xD34++0x0B line.long 0x00 "MMFAR,MemManage Fault Address Register" line.long 0x04 "BFAR,BusFault Address Register" line.long 0x08 "AFSR,Auxiliary Fault Status Register" group.long 0xD88++0x03 line.long 0x00 "CPACR,Coprocessor Access Control Register" bitfld.long 0x00 22.--23. " CP11 ,Access privileges for coprocessor 11" "Access denied,Privileged only,Reserved,Full access" bitfld.long 0x00 20.--21. " CP10 ,Access privileges for coprocessor 10" "Access denied,Privileged only,Reserved,Full access" bitfld.long 0x00 14.--15. " CP7 ,Access privileges for coprocessor 7" "Access denied,Privileged only,Reserved,Full access" textline " " bitfld.long 0x00 12.--13. " CP6 ,Access privileges for coprocessor 6" "Access denied,Privileged only,Reserved,Full access" bitfld.long 0x00 10.--11. " CP5 ,Access privileges for coprocessor 5" "Access denied,Privileged only,Reserved,Full access" bitfld.long 0x00 8.--9. " CP4 ,Access privileges for coprocessor 4" "Access denied,Privileged only,Reserved,Full access" textline " " bitfld.long 0x00 6.--7. " CP3 ,Access privileges for coprocessor 3" "Access denied,Privileged only,Reserved,Full access" bitfld.long 0x00 4.--5. " CP2 ,Access privileges for coprocessor 2" "Access denied,Privileged only,Reserved,Full access" bitfld.long 0x00 2.--3. " CP1 ,Access privileges for coprocessor 1" "Access denied,Privileged only,Reserved,Full access" textline " " bitfld.long 0x00 0.--1. " CP0 ,Access privileges for coprocessor 0" "Access denied,Privileged only,Reserved,Full access" wgroup.long 0xF00++0x03 line.long 0x00 "STIR,Software Trigger Interrupt Register" hexmask.long.word 0x00 0.--8. 1. " INTID ,Indicates the interrupt to be triggered" width 10. tree "Feature Registers" rgroup.long 0xD40++0x0B line.long 0x00 "ID_PFR0,Processor Feature Register 0" bitfld.long 0x00 4.--7. " STATE1 ,Thumb instruction set support" ",,,Supported,?..." bitfld.long 0x00 0.--3. " STATE0 ,ARM instruction set support" "Not supported,?..." line.long 0x04 "ID_PFR1,Processor Feature Register 1" bitfld.long 0x04 8.--11. " MPROF ,M profile programmers' model" ",,2-stack,?..." line.long 0x08 "ID_DFR0,Debug Feature Register 0" bitfld.long 0x08 20.--23. " DBGMOD ,Support for memory-mapped debug model for M profile processors" "Not supported,Supported,?..." hgroup.long 0xD4C++0x03 hide.long 0x00 "ID_AFR0,Auxiliary Feature Register 0" rgroup.long 0xD50++0x03 line.long 0x00 "ID_MMFR0,Memory Model Feature Register 0" bitfld.long 0x00 20.--23. " AUXREG ,Indicates the support for Auxiliary registers" "Not supported,ACTLR only,?..." bitfld.long 0x00 16.--19. " TCMSUP ,Indicates the support for Tightly Coupled Memory (TCM)" "Not supported,Supported,?..." bitfld.long 0x00 12.--15. " SHRLEV ,Indicates the number of shareability levels implemented" "Level 1,?..." textline " " bitfld.long 0x00 8.--11. " OUTMSHR ,Indicates the outermost shareability domain implemented" "Non-cacheable,,,,,,,,,,,,,,,Ignored" bitfld.long 0x00 4.--7. " PMSASUP ,Indicates support for a PMSA" "Not supported,,,PMSAv7,?..." hgroup.long 0xD54++0x03 hide.long 0x00 "ID_MMFR1,Memory Model Feature Register 1" rgroup.long 0xD58++0x03 line.long 0x00 "ID_MMFR2,Memory Model Feature Register 2" bitfld.long 0x00 24.--27. " WFISTALL ,Indicates the support for Wait For Interrupt (WFI) stalling" "Not supported,Supported,?..." rgroup.long 0xD60++0x13 line.long 0x00 "ID_ISAR0,Instruction Set Attributes Register 0" bitfld.long 0x00 24.--27. " DIVIDE ,Indicates the supported divide instructions" "Not supported,SDIV/UDIV,?..." bitfld.long 0x00 20.--23. " DEBUG ,Indicates the supported debug instructions" "Not supported,BKPT,?..." bitfld.long 0x00 16.--19. " COPROC ,Indicates the supported coprocessor instructions" "Not supported,CDP/LDC/MCR/STC,CDP2/LDC2/MCR2/STC2,MCRR/MRRC,MCRR2/MRRC2,?..." textline " " bitfld.long 0x00 12.--15. " CMPBRANCH ,Indicates the supported combined compare and branch instructions" "Not supported,CBNZ/CBZ,?..." bitfld.long 0x00 8.--11. " BITFIELD ,Indicates the supported bitfield instructions" "Not supported,BFC/BFI/SBFX/UBFX,?..." bitfld.long 0x00 4.--7. " BITCOUNT ,Indicates the supported bit counting instructions" "Not supported,CLZ,?..." line.long 0x04 "ID_ISAR1,Instruction Set Attributes Register 1" bitfld.long 0x04 24.--27. " INTERWORK ,Indicates the supported Interworking instructions" "Not supported,BX,BX/BLX,?..." bitfld.long 0x04 20.--23. " IMMEDIATE ,Indicates the support for data-processing instructions with long immediates" "Not supported,ADDW/MOVW/MOVT/SUBW,?..." bitfld.long 0x04 16.--19. " IFTHEN ,Indicates the supported IfThen instructions" "Not supported,IT,?..." textline " " bitfld.long 0x04 12.--15. " EXTEND ,Indicates the supported Extend instructions" "Not supported,Supported,Supported,?..." line.long 0x08 "ID_ISAR2,Instruction Set Attributes Register 2" bitfld.long 0x08 24.--27. " REVERSAL ,Indicates the supported reversal instructions" "Not supported,REV/REV16/REVSH,REV/REV16/REVSH/RBIT,?..." bitfld.long 0x08 20.--23. " MULTU ,Indicates the supported advanced unsigned multiply instructions" "Not supported,UMULL/UMLAL,UMULL/UMLAL/UMAAL,?..." bitfld.long 0x08 16.--19. " MULTS ,Indicates the supported advanced signed multiply instructions" "Not supported,Supported,Supported,Supported,?..." textline " " bitfld.long 0x08 12.--15. " MULT ,Indicates the supported additional multiply instructions" "Not supported,MLA,MLA/MLS,?..." bitfld.long 0x08 8.--11. " MULTIACCESSINT ,Indicates the support for multi-access interruptible instructions" "Not supported,LDM/STM restartable,LDM/STM continuable,?..." bitfld.long 0x08 4.--7. " MEMHINT ,Indicates the supported memory hint instructions" "Not supported,,,PLD/PLI,?..." textline " " bitfld.long 0x08 0.--3. " LOADSTORE ,Indicates the supported additional load and store instructions" "Not supported,LDRD/STRD,?..." line.long 0x0C "ID_ISAR3,Instruction Set Attributes Register 3" bitfld.long 0x0C 24.--27. " TRUENOP ,Indicates the support for a true NOP instruction" "Not supported,Supported,?..." bitfld.long 0x0C 20.--23. " THUMBCOPY ,Indicates the supported non flag-setting MOV instructions" "Not supported,Supported,?..." bitfld.long 0x0C 16.--19. " TABBRANCH ,Indicates the supported Table Branch instructions" "Not supported,TBB/TBH,?..." textline " " bitfld.long 0x0C 12.--15. " SYNCHPRIM ,Indicates the supported Table Branch instructions" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x0C 8.--11. " SVC ,Indicates the supported SVC instructions" "Not supported,SVC,?..." bitfld.long 0x0C 4.--7. " SIMD ,Indicates the supported SIMD instructions" "Not supported,Supported,,Supported,?..." textline " " bitfld.long 0x0C 0.--3. " SATURATE ,Indicates the supported Saturate instructions" "Not supported,QADD/QDADD/QDSUB/QSUB,?..." line.long 0x10 "ID_ISAR4,Instruction Set Attributes Register 4" bitfld.long 0x10 24.--27. " PSR_M ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,?..." bitfld.long 0x10 20.--23. " SYNCHPRIMFRAC ,Indicates the supported M profile instructions to modify the PSRs" "Not supported,Supported,Supported,Supported,?..." bitfld.long 0x10 16.--19. " BARRIER ,Indicates the supported Barrier instructions" "Not supported,DMB/DSB/ISB,?..." textline " " bitfld.long 0x10 8.--11. " WRITEBACK ,Indicates the support for writeback addressing modes" "Basic support,Full support,?..." bitfld.long 0x10 4.--7. " WITHSHIFTS ,Indicates the support for instructions with shifts" "MOV/shift,Shift LSL 0-3,,Shift other,?..." bitfld.long 0x10 0.--3. " UNPRIV ,Indicates the supported unprivileged instructions" "Not supported,LDRBT/LDRT/STRBT/STRT,LDRBT/LDRT/STRBT/STRT/LDRHT/LDRSBT/LDRSHTSTRHT,?..." tree.end width 6. tree "CoreSight Identification Registers" rgroup.long 0xFE0++0x0F line.long 0x00 "PID0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "PID1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "PID2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0C "PID3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "PID4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "CID0,Component ID0 (Preamble)" line.long 0x04 "CID1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble" line.long 0x08 "CID2,Component ID2" line.long 0x0C "CID3,Component ID3" tree.end width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Memory Protection Unit" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 15. rgroup.long 0xD90++0x03 line.long 0x00 "MPU_TYPE,MPU Type Register" bitfld.long 0x00 16.--23. " IREGION ,Instruction region" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..." bitfld.long 0x00 8.--15. " DREGION ,Number of regions supported by the MPU" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,?..." bitfld.long 0x00 0. " SEPARATE ,Indicates support for separate instruction and data address maps" "Not supported,Supported" group.long 0xD94++0x03 line.long 0x00 "MPU_CTRL,MPU Control Register" bitfld.long 0x00 2. " PRIVDEFENA ,Enables the default memory map as a background region for privileged access" "Disabled,Enabled" bitfld.long 0x00 1. " HFNMIENA ,Handlers executing with priority less than 0 access memory with the MPU enabled or with the MPU disabled" "MPU disabled,MPU enabled" bitfld.long 0x00 0. " ENABLE ,Enables the MPU" "Disabled,Enabled" group.long 0xD98++0x03 line.long 0x00 "MPU_RNR,MPU Region Number Register" hexmask.long.byte 0x00 0.--7. 1. " REGION ,Indicates the memory region accessed by MPU_RBAR and MPU_RASR" tree.close "MPU regions" if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x0 group.long 0xD9C++0x03 "Region 0" saveout 0xD98 %l 0x0 line.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x0 line.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 0 (not implemented)" saveout 0xD98 %l 0x0 hide.long 0x00 "MPU_RBAR0,MPU Region Base Address Register 0" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x0 hide.long 0x00 "MPU_RASR0,MPU Region Attribute and Size Register 0" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x1 group.long 0xD9C++0x03 "Region 1" saveout 0xD98 %l 0x1 line.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x1 line.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 1 (not implemented)" saveout 0xD98 %l 0x1 hide.long 0x00 "MPU_RBAR1,MPU Region Base Address Register 1" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x1 hide.long 0x00 "MPU_RASR1,MPU Region Attribute and Size Register 1" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x2 group.long 0xD9C++0x03 "Region 2" saveout 0xD98 %l 0x2 line.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x2 line.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 2 (not implemented)" saveout 0xD98 %l 0x2 hide.long 0x00 "MPU_RBAR2,MPU Region Base Address Register 2" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x2 hide.long 0x00 "MPU_RASR2,MPU Region Attribute and Size Register 2" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x3 group.long 0xD9C++0x03 "Region 3" saveout 0xD98 %l 0x3 line.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x3 line.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 3 (not implemented)" saveout 0xD98 %l 0x3 hide.long 0x00 "MPU_RBAR3,MPU Region Base Address Register 3" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x3 hide.long 0x00 "MPU_RASR3,MPU Region Attribute and Size Register 3" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x4 group.long 0xD9C++0x03 "Region 4" saveout 0xD98 %l 0x4 line.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x4 line.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 4 (not implemented)" saveout 0xD98 %l 0x4 hide.long 0x00 "MPU_RBAR4,MPU Region Base Address Register 4" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x4 hide.long 0x00 "MPU_RASR4,MPU Region Attribute and Size Register 4" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x5 group.long 0xD9C++0x03 "Region 5" saveout 0xD98 %l 0x5 line.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x5 line.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 5 (not implemented)" saveout 0xD98 %l 0x5 hide.long 0x00 "MPU_RBAR5,MPU Region Base Address Register 5" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x5 hide.long 0x00 "MPU_RASR5,MPU Region Attribute and Size Register 5" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x6 group.long 0xD9C++0x03 "Region 6" saveout 0xD98 %l 0x6 line.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x6 line.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 6 (not implemented)" saveout 0xD98 %l 0x6 hide.long 0x00 "MPU_RBAR6,MPU Region Base Address Register 6" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x6 hide.long 0x00 "MPU_RASR6,MPU Region Attribute and Size Register 6" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x7 group.long 0xD9C++0x03 "Region 7" saveout 0xD98 %l 0x7 line.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x7 line.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 7 (not implemented)" saveout 0xD98 %l 0x7 hide.long 0x00 "MPU_RBAR7,MPU Region Base Address Register 7" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x7 hide.long 0x00 "MPU_RASR7,MPU Region Attribute and Size Register 7" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x8 group.long 0xD9C++0x03 "Region 8" saveout 0xD98 %l 0x8 line.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x8 line.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 8 (not implemented)" saveout 0xD98 %l 0x8 hide.long 0x00 "MPU_RBAR8,MPU Region Base Address Register 8" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x8 hide.long 0x00 "MPU_RASR8,MPU Region Attribute and Size Register 8" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0x9 group.long 0xD9C++0x03 "Region 9" saveout 0xD98 %l 0x9 line.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0x9 line.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 9 (not implemented)" saveout 0xD98 %l 0x9 hide.long 0x00 "MPU_RBAR9,MPU Region Base Address Register 9" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0x9 hide.long 0x00 "MPU_RASR9,MPU Region Attribute and Size Register 9" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xA group.long 0xD9C++0x03 "Region 10" saveout 0xD98 %l 0xA line.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xA line.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 10 (not implemented)" saveout 0xD98 %l 0xA hide.long 0x00 "MPU_RBAR10,MPU Region Base Address Register 10" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xA hide.long 0x00 "MPU_RASR10,MPU Region Attribute and Size Register 10" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xB group.long 0xD9C++0x03 "Region 11" saveout 0xD98 %l 0xB line.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xB line.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 11 (not implemented)" saveout 0xD98 %l 0xB hide.long 0x00 "MPU_RBAR11,MPU Region Base Address Register 11" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xB hide.long 0x00 "MPU_RASR11,MPU Region Attribute and Size Register 11" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xC group.long 0xD9C++0x03 "Region 12" saveout 0xD98 %l 0xC line.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xC line.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 12 (not implemented)" saveout 0xD98 %l 0xC hide.long 0x00 "MPU_RBAR12,MPU Region Base Address Register 12" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xC hide.long 0x00 "MPU_RASR12,MPU Region Attribute and Size Register 12" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xD group.long 0xD9C++0x03 "Region 13" saveout 0xD98 %l 0xD line.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xD line.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 13 (not implemented)" saveout 0xD98 %l 0xD hide.long 0x00 "MPU_RBAR13,MPU Region Base Address Register 13" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xD hide.long 0x00 "MPU_RASR13,MPU Region Attribute and Size Register 13" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xE group.long 0xD9C++0x03 "Region 14" saveout 0xD98 %l 0xE line.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xE line.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 14 (not implemented)" saveout 0xD98 %l 0xE hide.long 0x00 "MPU_RBAR14,MPU Region Base Address Register 14" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xE hide.long 0x00 "MPU_RASR14,MPU Region Attribute and Size Register 14" textline " " textline " " endif if ((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xD90)&0xff00)>>8)>0xF group.long 0xD9C++0x03 "Region 15" saveout 0xD98 %l 0xF line.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15" hexmask.long 0x00 5.--31. 0x20 " ADDR ,Base address of the region" group.long 0xDA0++0x03 saveout 0xD98 %l 0xF line.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15" bitfld.long 0x00 28. " XN ,eXecute Never" "Execute,Not execute" bitfld.long 0x00 24.--26. " AP ,Data Access Permission" "No access,S:RW U:--,S:RW U:R-,S:RW U:RW,reserved,S:R- U:--,S:R- U:R-,S:R- U:R-" bitfld.long 0x00 19.--21. " TEX ,Type Extension Field" "0,1,2,3,4,5,6,7" textline " " bitfld.long 0x00 18. " S ,Shareable Bit" "Not shareable,Shareable" bitfld.long 0x00 17. " C ,Cacheable Bit" "Not cacheable,Cacheable" bitfld.long 0x00 16. " B ,Bufferable Bit" "Not bufferable,Bufferable" textline " " bitfld.long 0x00 15. " SRD[7..0] ,Subregion 7 Disable" "0,1" bitfld.long 0x00 14. ",Subregion 6 Disable" "0,1" bitfld.long 0x00 13. ",Subregion 5 Disable" "0,1" bitfld.long 0x00 12. ",Subregion 4 Disable" "0,1" bitfld.long 0x00 11. ",Subregion 3 Disable" "0,1" bitfld.long 0x00 10. ",Subregion 2 Disable" "0,1" bitfld.long 0x00 9. ",Subregion 1 Disabled" "0,1" bitfld.long 0x00 8. ",Subregion 0 Disable" "0,1" bitfld.long 0x00 1.--5. " SIZE ,Indicates the region size" "-,-,-,-,32 B,64 B,128 B,256 B,512 B,1 kB,2 kB,4 kB,8 kB,16 kB,32 kB,64 kB,128 kB,256 kB,512 kB,1 MB,2 MB,4 MB,8 MB,16 MB,32 MB,64 MB,128 MB,256 MB,512 MB,1 GB,2 GB,4 GB" bitfld.long 0x00 0. " ENABLE ,Enables this region" "Disabled,Enabled" else hgroup.long 0xD9C++0x03 "Region 15 (not implemented)" saveout 0xD98 %l 0xF hide.long 0x00 "MPU_RBAR15,MPU Region Base Address Register 15" hgroup.long 0xDA0++0x03 saveout 0xD98 %l 0xF hide.long 0x00 "MPU_RASR15,MPU Region Attribute and Size Register 15" textline " " textline " " endif tree.end width 0x0b else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Nested Vectored Interrupt Controller" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 6. rgroup.long 0x04++0x03 line.long 0x00 "ICTR,Interrupt Controller Type Register" bitfld.long 0x00 0.--3. " INTLINESNUM ,Total Number of Interrupt" "0-32,33-64,65-96,97-128,129-160,161-192,193-224,225-240,?..." tree "Interrupt Enable Registers" width 23. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00) group.long 0x100++0x03 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01) group.long 0x100++0x7 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02) group.long 0x100++0x0B line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03) group.long 0x100++0x0F line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04) group.long 0x100++0x13 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05) group.long 0x100++0x17 line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06) group.long 0x100++0x1B line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07) group.long 0x100++0x1F line.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " ENA31 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " ENA30 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " ENA29 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " ENA28 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " ENA27 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " ENA26 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " ENA25 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " ENA24 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " ENA23 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " ENA22 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " ENA21 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " ENA20 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " ENA19 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " ENA18 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " ENA17 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " ENA16 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " ENA15 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " ENA14 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " ENA13 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " ENA12 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " ENA11 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " ENA10 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " ENA9 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " ENA8 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " ENA7 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " ENA6 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " ENA5 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " ENA4 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " ENA3 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " ENA2 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " ENA1 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " ENA0 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " ENA63 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " ENA62 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " ENA61 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " ENA60 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " ENA59 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " ENA58 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " ENA57 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " ENA56 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " ENA55 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " ENA54 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " ENA53 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " ENA52 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " ENA51 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " ENA50 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " ENA49 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " ENA48 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " ENA47 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " ENA46 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " ENA45 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " ENA44 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " ENA43 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " ENA42 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " ENA41 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " ENA40 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " ENA39 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " ENA38 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " ENA37 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " ENA36 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " ENA35 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " ENA34 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " ENA33 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " ENA32 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " ENA95 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " ENA94 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " ENA93 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " ENA92 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " ENA91 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " ENA90 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " ENA89 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " ENA88 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " ENA87 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " ENA86 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " ENA85 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " ENA84 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " ENA83 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " ENA82 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " ENA81 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " ENA80 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " ENA79 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " ENA78 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " ENA77 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " ENA76 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " ENA75 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " ENA74 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " ENA73 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " ENA72 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " ENA71 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " ENA70 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " ENA69 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " ENA68 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " ENA67 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " ENA66 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " ENA65 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " ENA64 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " ENA127 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " ENA126 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " ENA125 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " ENA124 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " ENA123 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " ENA122 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " ENA121 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " ENA120 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " ENA119 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " ENA118 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " ENA117 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " ENA116 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " ENA115 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " ENA114 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " ENA113 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " ENA112 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " ENA111 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " ENA110 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " ENA109 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " ENA108 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " ENA107 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " ENA106 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " ENA105 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " ENA104 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " ENA103 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " ENA102 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " ENA101 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " ENA100 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " ENA99 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " ENA98 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " ENA97 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " ENA96 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " ENA159 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " ENA158 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " ENA157 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " ENA156 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " ENA155 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " ENA154 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " ENA153 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " ENA152 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " ENA151 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " ENA150 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " ENA149 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " ENA148 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " ENA147 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " ENA146 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " ENA145 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " ENA144 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " ENA143 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " ENA142 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " ENA141 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " ENA140 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " ENA139 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " ENA138 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " ENA137 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " ENA136 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " ENA135 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " ENA134 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " ENA133 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " ENA132 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " ENA131 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " ENA130 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " ENA129 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " ENA128 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " ENA191 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " ENA190 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " ENA189 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " ENA188 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " ENA187 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " ENA186 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " ENA185 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " ENA184 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " ENA183 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " ENA182 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " ENA181 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " ENA180 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " ENA179 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " ENA178 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " ENA177 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " ENA176 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " ENA175 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " ENA174 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " ENA173 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " ENA172 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " ENA171 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " ENA170 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " ENA169 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " ENA168 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " ENA167 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " ENA166 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " ENA165 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " ENA164 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " ENA163 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " ENA162 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " ENA161 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " ENA160 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x18 31. 0x18 31. 0x98 31. " ENA223 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 30. 0x18 30. 0x98 30. " ENA222 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 29. 0x18 29. 0x98 29. " ENA221 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 28. 0x18 28. 0x98 28. " ENA220 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 27. 0x18 27. 0x98 27. " ENA219 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 26. 0x18 26. 0x98 26. " ENA218 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 25. 0x18 25. 0x98 25. " ENA217 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 24. 0x18 24. 0x98 24. " ENA216 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 23. 0x18 23. 0x98 23. " ENA215 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 22. 0x18 22. 0x98 22. " ENA214 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 21. 0x18 21. 0x98 21. " ENA213 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 20. 0x18 20. 0x98 20. " ENA212 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 19. 0x18 19. 0x98 19. " ENA211 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 18. 0x18 18. 0x98 18. " ENA210 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 17. 0x18 17. 0x98 17. " ENA209 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 16. 0x18 16. 0x98 16. " ENA208 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 15. 0x18 15. 0x98 15. " ENA207 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 14. 0x18 14. 0x98 14. " ENA206 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 13. 0x18 13. 0x98 13. " ENA205 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 12. 0x18 12. 0x98 12. " ENA204 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 11. 0x18 11. 0x98 11. " ENA203 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 10. 0x18 10. 0x98 10. " ENA202 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 9. 0x18 9. 0x98 9. " ENA201 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 8. 0x18 8. 0x98 8. " ENA200 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 7. 0x18 7. 0x98 7. " ENA199 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 6. 0x18 6. 0x98 6. " ENA198 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 5. 0x18 5. 0x98 5. " ENA197 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 4. 0x18 4. 0x98 4. " ENA196 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 3. 0x18 3. 0x98 3. " ENA195 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 2. 0x18 2. 0x98 2. " ENA194 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x18 1. 0x18 1. 0x98 1. " ENA193 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x18 0. 0x18 0. 0x98 0. " ENA192 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" line.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register" setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " ENA239 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " ENA238 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " ENA237 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " ENA236 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " ENA235 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " ENA234 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " ENA233 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " ENA232 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " ENA231 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " ENA230 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " ENA229 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " ENA228 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" textline " " setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " ENA227 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " ENA226 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " ENA225 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " ENA224 ,Interrupt Set/Clear Enable Bit" "Disabled,Enabled" else hgroup.long 0x100++0x1F hide.long 0x00 "IRQ0_31_EN_SET/CLR,Interrupt Enable Register" hide.long 0x04 "IRQ32_63_EN_SET/CLR,Interrupt Enable Register" hide.long 0x08 "IRQ64_95_EN_SET/CLR,Interrupt Enable Register" hide.long 0x0c "IRQ96_127_EN_SET/CLR,Interrupt Enable Register" hide.long 0x10 "IRQ128_159_EN_SET/CLR,Interrupt Enable Register" hide.long 0x14 "IRQ160_191_EN_SET/CLR,Interrupt Enable Register" hide.long 0x18 "IRQ192_223_EN_SET/CLR,Interrupt Enable Register" hide.long 0x1c "IRQ224_239_EN_SET/CLR,Interrupt Enable Register" endif tree.end tree "Interrupt Pending Registers" width 23. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00) group.long 0x200++0x03 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01) group.long 0x200++0x07 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02) group.long 0x200++0x0B line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03) group.long 0x200++0x0F line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04) group.long 0x200++0x13 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05) group.long 0x200++0x17 line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06) group.long 0x200++0x1B line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07) group.long 0x200++0x1F line.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " PEN31 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " PEN30 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " PEN29 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 28. 0x00 28. 0x80 28. " PEN28 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " PEN27 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " PEN26 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " PEN25 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " PEN24 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " PEN23 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 22. 0x00 22. 0x80 22. " PEN22 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " PEN21 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " PEN20 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " PEN19 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " PEN18 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " PEN17 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 16. 0x00 16. 0x80 16. " PEN16 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " PEN15 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " PEN14 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " PEN13 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " PEN12 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " PEN11 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 10. 0x00 10. 0x80 10. " PEN10 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " PEN9 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " PEN8 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " PEN7 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " PEN6 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " PEN5 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 4. 0x00 4. 0x80 4. " PEN4 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " PEN3 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " PEN2 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " PEN1 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " PEN0 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x04 31. 0x04 31. 0x84 31. " PEN63 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 30. 0x04 30. 0x84 30. " PEN62 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 29. 0x04 29. 0x84 29. " PEN61 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 28. 0x04 28. 0x84 28. " PEN60 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 27. 0x04 27. 0x84 27. " PEN59 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 26. 0x04 26. 0x84 26. " PEN58 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 25. 0x04 25. 0x84 25. " PEN57 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 24. 0x04 24. 0x84 24. " PEN56 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 23. 0x04 23. 0x84 23. " PEN55 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 22. 0x04 22. 0x84 22. " PEN54 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 21. 0x04 21. 0x84 21. " PEN53 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 20. 0x04 20. 0x84 20. " PEN52 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 19. 0x04 19. 0x84 19. " PEN51 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 18. 0x04 18. 0x84 18. " PEN50 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 17. 0x04 17. 0x84 17. " PEN49 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 16. 0x04 16. 0x84 16. " PEN48 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 15. 0x04 15. 0x84 15. " PEN47 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 14. 0x04 14. 0x84 14. " PEN46 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 13. 0x04 13. 0x84 13. " PEN45 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 12. 0x04 12. 0x84 12. " PEN44 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 11. 0x04 11. 0x84 11. " PEN43 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 10. 0x04 10. 0x84 10. " PEN42 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 9. 0x04 9. 0x84 9. " PEN41 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 8. 0x04 8. 0x84 8. " PEN40 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 7. 0x04 7. 0x84 7. " PEN39 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 6. 0x04 6. 0x84 6. " PEN38 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 5. 0x04 5. 0x84 5. " PEN37 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 4. 0x04 4. 0x84 4. " PEN36 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 3. 0x04 3. 0x84 3. " PEN35 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 2. 0x04 2. 0x84 2. " PEN34 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x04 1. 0x04 1. 0x84 1. " PEN33 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x04 0. 0x04 0. 0x84 0. " PEN32 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x08 31. 0x08 31. 0x88 31. " PEN95 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 30. 0x08 30. 0x88 30. " PEN94 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 29. 0x08 29. 0x88 29. " PEN93 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 28. 0x08 28. 0x88 28. " PEN92 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 27. 0x08 27. 0x88 27. " PEN91 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 26. 0x08 26. 0x88 26. " PEN90 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 25. 0x08 25. 0x88 25. " PEN89 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 24. 0x08 24. 0x88 24. " PEN88 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 23. 0x08 23. 0x88 23. " PEN87 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 22. 0x08 22. 0x88 22. " PEN86 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 21. 0x08 21. 0x88 21. " PEN85 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 20. 0x08 20. 0x88 20. " PEN84 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 19. 0x08 19. 0x88 19. " PEN83 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 18. 0x08 18. 0x88 18. " PEN82 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 17. 0x08 17. 0x88 17. " PEN81 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 16. 0x08 16. 0x88 16. " PEN80 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 15. 0x08 15. 0x88 15. " PEN79 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 14. 0x08 14. 0x88 14. " PEN78 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 13. 0x08 13. 0x88 13. " PEN77 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 12. 0x08 12. 0x88 12. " PEN76 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 11. 0x08 11. 0x88 11. " PEN75 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 10. 0x08 10. 0x88 10. " PEN74 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 9. 0x08 9. 0x88 9. " PEN73 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 8. 0x08 8. 0x88 8. " PEN72 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 7. 0x08 7. 0x88 7. " PEN71 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 6. 0x08 6. 0x88 6. " PEN70 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 5. 0x08 5. 0x88 5. " PEN69 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 4. 0x08 4. 0x88 4. " PEN68 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 3. 0x08 3. 0x88 3. " PEN67 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 2. 0x08 2. 0x88 2. " PEN66 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x08 1. 0x08 1. 0x88 1. " PEN65 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x08 0. 0x08 0. 0x88 0. " PEN64 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x0c 31. 0x0c 31. 0x8c 31. " PEN127 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 30. 0x0c 30. 0x8c 30. " PEN126 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 29. 0x0c 29. 0x8c 29. " PEN125 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 28. 0x0c 28. 0x8c 28. " PEN124 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 27. 0x0c 27. 0x8c 27. " PEN123 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 26. 0x0c 26. 0x8c 26. " PEN122 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 25. 0x0c 25. 0x8c 25. " PEN121 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 24. 0x0c 24. 0x8c 24. " PEN120 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 23. 0x0c 23. 0x8c 23. " PEN119 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 22. 0x0c 22. 0x8c 22. " PEN118 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 21. 0x0c 21. 0x8c 21. " PEN117 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 20. 0x0c 20. 0x8c 20. " PEN116 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 19. 0x0c 19. 0x8c 19. " PEN115 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 18. 0x0c 18. 0x8c 18. " PEN114 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 17. 0x0c 17. 0x8c 17. " PEN113 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 16. 0x0c 16. 0x8c 16. " PEN112 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 15. 0x0c 15. 0x8c 15. " PEN111 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 14. 0x0c 14. 0x8c 14. " PEN110 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 13. 0x0c 13. 0x8c 13. " PEN109 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 12. 0x0c 12. 0x8c 12. " PEN108 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 11. 0x0c 11. 0x8c 11. " PEN107 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 10. 0x0c 10. 0x8c 10. " PEN106 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 9. 0x0c 9. 0x8c 9. " PEN105 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 8. 0x0c 8. 0x8c 8. " PEN104 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 7. 0x0c 7. 0x8c 7. " PEN103 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 6. 0x0c 6. 0x8c 6. " PEN102 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 5. 0x0c 5. 0x8c 5. " PEN101 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 4. 0x0c 4. 0x8c 4. " PEN100 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 3. 0x0c 3. 0x8c 3. " PEN99 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 2. 0x0c 2. 0x8c 2. " PEN98 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x0c 1. 0x0c 1. 0x8c 1. " PEN97 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x0c 0. 0x0c 0. 0x8c 0. " PEN96 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x10 31. 0x10 31. 0x90 31. " PEN159 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 30. 0x10 30. 0x90 30. " PEN158 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 29. 0x10 29. 0x90 29. " PEN157 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 28. 0x10 28. 0x90 28. " PEN156 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 27. 0x10 27. 0x90 27. " PEN155 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 26. 0x10 26. 0x90 26. " PEN154 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 25. 0x10 25. 0x90 25. " PEN153 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 24. 0x10 24. 0x90 24. " PEN152 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 23. 0x10 23. 0x90 23. " PEN151 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 22. 0x10 22. 0x90 22. " PEN150 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 21. 0x10 21. 0x90 21. " PEN149 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 20. 0x10 20. 0x90 20. " PEN148 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 19. 0x10 19. 0x90 19. " PEN147 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 18. 0x10 18. 0x90 18. " PEN146 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 17. 0x10 17. 0x90 17. " PEN145 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 16. 0x10 16. 0x90 16. " PEN144 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 15. 0x10 15. 0x90 15. " PEN143 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 14. 0x10 14. 0x90 14. " PEN142 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 13. 0x10 13. 0x90 13. " PEN141 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 12. 0x10 12. 0x90 12. " PEN140 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 11. 0x10 11. 0x90 11. " PEN139 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 10. 0x10 10. 0x90 10. " PEN138 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 9. 0x10 9. 0x90 9. " PEN137 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 8. 0x10 8. 0x90 8. " PEN136 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 7. 0x10 7. 0x90 7. " PEN135 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 6. 0x10 6. 0x90 6. " PEN134 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 5. 0x10 5. 0x90 5. " PEN133 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 4. 0x10 4. 0x90 4. " PEN132 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 3. 0x10 3. 0x90 3. " PEN131 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 2. 0x10 2. 0x90 2. " PEN130 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x10 1. 0x10 1. 0x90 1. " PEN129 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x10 0. 0x10 0. 0x90 0. " PEN128 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x14 31. 0x14 31. 0x94 31. " PEN191 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 30. 0x14 30. 0x94 30. " PEN190 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 29. 0x14 29. 0x94 29. " PEN189 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 28. 0x14 28. 0x94 28. " PEN188 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 27. 0x14 27. 0x94 27. " PEN187 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 26. 0x14 26. 0x94 26. " PEN186 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 25. 0x14 25. 0x94 25. " PEN185 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 24. 0x14 24. 0x94 24. " PEN184 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 23. 0x14 23. 0x94 23. " PEN183 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 22. 0x14 22. 0x94 22. " PEN182 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 21. 0x14 21. 0x94 21. " PEN181 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 20. 0x14 20. 0x94 20. " PEN180 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 19. 0x14 19. 0x94 19. " PEN179 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 18. 0x14 18. 0x94 18. " PEN178 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 17. 0x14 17. 0x94 17. " PEN177 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 16. 0x14 16. 0x94 16. " PEN176 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 15. 0x14 15. 0x94 15. " PEN175 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 14. 0x14 14. 0x94 14. " PEN174 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 13. 0x14 13. 0x94 13. " PEN173 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 12. 0x14 12. 0x94 12. " PEN172 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 11. 0x14 11. 0x94 11. " PEN171 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 10. 0x14 10. 0x94 10. " PEN170 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 9. 0x14 9. 0x94 9. " PEN169 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 8. 0x14 8. 0x94 8. " PEN168 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 7. 0x14 7. 0x94 7. " PEN167 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 6. 0x14 6. 0x94 6. " PEN166 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 5. 0x14 5. 0x94 5. " PEN165 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 4. 0x14 4. 0x94 4. " PEN164 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 3. 0x14 3. 0x94 3. " PEN163 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 2. 0x14 2. 0x94 2. " PEN162 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x14 1. 0x14 1. 0x94 1. " PEN161 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x14 0. 0x14 0. 0x94 0. " PEN160 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x18 31. 0x18 31. 0x98 31. " PEN223 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 30. 0x18 30. 0x98 30. " PEN222 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 29. 0x18 29. 0x98 29. " PEN221 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 28. 0x18 28. 0x98 28. " PEN220 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 27. 0x18 27. 0x98 27. " PEN219 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 26. 0x18 26. 0x98 26. " PEN218 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 25. 0x18 25. 0x98 25. " PEN217 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 24. 0x18 24. 0x98 24. " PEN216 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 23. 0x18 23. 0x98 23. " PEN215 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 22. 0x18 22. 0x98 22. " PEN214 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 21. 0x18 21. 0x98 21. " PEN213 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 20. 0x18 20. 0x98 20. " PEN212 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 19. 0x18 19. 0x98 19. " PEN211 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 18. 0x18 18. 0x98 18. " PEN210 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 17. 0x18 17. 0x98 17. " PEN209 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 16. 0x18 16. 0x98 16. " PEN208 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 15. 0x18 15. 0x98 15. " PEN207 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 14. 0x18 14. 0x98 14. " PEN206 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 13. 0x18 13. 0x98 13. " PEN205 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 12. 0x18 12. 0x98 12. " PEN204 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 11. 0x18 11. 0x98 11. " PEN203 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 10. 0x18 10. 0x98 10. " PEN202 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 9. 0x18 9. 0x98 9. " PEN201 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 8. 0x18 8. 0x98 8. " PEN200 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 7. 0x18 7. 0x98 7. " PEN199 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 6. 0x18 6. 0x98 6. " PEN198 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 5. 0x18 5. 0x98 5. " PEN197 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 4. 0x18 4. 0x98 4. " PEN196 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 3. 0x18 3. 0x98 3. " PEN195 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 2. 0x18 2. 0x98 2. " PEN194 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x18 1. 0x18 1. 0x98 1. " PEN193 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x18 0. 0x18 0. 0x98 0. " PEN192 ,Interrupt Set/Clear Pending" "Not pending,Pending" line.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register" setclrfld.long 0x1c 15. 0x1c 15. 0x9c 15. " PEN239 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 14. 0x1c 14. 0x9c 14. " PEN238 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 13. 0x1c 13. 0x9c 13. " PEN237 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 12. 0x1c 12. 0x9c 12. " PEN236 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 11. 0x1c 11. 0x9c 11. " PEN235 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 10. 0x1c 10. 0x9c 10. " PEN234 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x1c 9. 0x1c 9. 0x9c 9. " PEN233 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 8. 0x1c 8. 0x9c 8. " PEN232 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 7. 0x1c 7. 0x9c 7. " PEN231 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 6. 0x1c 6. 0x9c 6. " PEN230 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 5. 0x1c 5. 0x9c 5. " PEN229 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 4. 0x1c 4. 0x9c 4. " PEN228 ,Interrupt Set/Clear Pending" "Not pending,Pending" textline " " setclrfld.long 0x1c 3. 0x1c 3. 0x9c 3. " PEN227 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 2. 0x1c 2. 0x9c 2. " PEN226 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 1. 0x1c 1. 0x9c 1. " PEN225 ,Interrupt Set/Clear Pending" "Not pending,Pending" setclrfld.long 0x1c 0. 0x1c 0. 0x9c 0. " PEN224 ,Interrupt Set/Clear Pending" "Not pending,Pending" else hgroup.long 0x200++0x1F hide.long 0x00 "IRQ0_31_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x04 "IRQ32_63_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x08 "IRQ64_95_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x0c "IRQ96_127_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x10 "IRQ128_159_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x14 "IRQ160_191_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x18 "IRQ192_223_PEN_SET/CLR,Interrupt Pending Register" hide.long 0x1c "IRQ224_239_PEN_SET/CLR,Interrupt Pending Register" endif tree.end tree "Interrupt Active Bit Registers" width 9. if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00) rgroup.long 0x300++0x03 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01) rgroup.long 0x300++0x07 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02) rgroup.long 0x300++0x0B line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03) rgroup.long 0x300++0x0F line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04) rgroup.long 0x300++0x13 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" line.long 0x10 "ACTIVE5,Active Bit Register 5" bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05) rgroup.long 0x300++0x17 line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" line.long 0x10 "ACTIVE5,Active Bit Register 5" bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" line.long 0x14 "ACTIVE6,Active Bit Register 6" bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06) rgroup.long 0x300++0x1B line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" line.long 0x10 "ACTIVE5,Active Bit Register 5" bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" line.long 0x14 "ACTIVE6,Active Bit Register 6" bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active" line.long 0x18 "ACTIVE7,Active Bit Register 7" bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07) rgroup.long 0x300++0x1F line.long 0x00 "ACTIVE1,Active Bit Register 1" bitfld.long 0x00 31. " ACTIVE31 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 30. " ACTIVE30 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 29. " ACTIVE29 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 28. " ACTIVE28 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 27. " ACTIVE27 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 26. " ACTIVE26 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 25. " ACTIVE25 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 24. " ACTIVE24 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 23. " ACTIVE23 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 22. " ACTIVE22 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 21. " ACTIVE21 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 20. " ACTIVE20 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 19. " ACTIVE19 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 18. " ACTIVE18 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 17. " ACTIVE17 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 16. " ACTIVE16 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 15. " ACTIVE15 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 14. " ACTIVE14 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 13. " ACTIVE13 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 12. " ACTIVE12 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 11. " ACTIVE11 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 10. " ACTIVE10 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 9. " ACTIVE9 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 8. " ACTIVE8 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 7. " ACTIVE7 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 6. " ACTIVE6 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 5. " ACTIVE5 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 4. " ACTIVE4 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 3. " ACTIVE3 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 2. " ACTIVE2 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x00 1. " ACTIVE1 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x00 0. " ACTIVE0 ,Interrupt Active Flag" "Not active,Active" line.long 0x04 "ACTIVE2,Active Bit Register 2" bitfld.long 0x04 31. " ACTIVE63 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 30. " ACTIVE62 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 29. " ACTIVE61 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 28. " ACTIVE60 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 27. " ACTIVE59 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 26. " ACTIVE58 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 25. " ACTIVE57 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 24. " ACTIVE56 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 23. " ACTIVE55 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 22. " ACTIVE54 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 21. " ACTIVE53 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 20. " ACTIVE52 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 19. " ACTIVE51 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 18. " ACTIVE50 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 17. " ACTIVE49 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 16. " ACTIVE48 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 15. " ACTIVE47 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 14. " ACTIVE46 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 13. " ACTIVE45 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 12. " ACTIVE44 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 11. " ACTIVE43 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 10. " ACTIVE42 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 9. " ACTIVE41 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 8. " ACTIVE40 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 7. " ACTIVE39 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 6. " ACTIVE38 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 5. " ACTIVE37 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 4. " ACTIVE36 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 3. " ACTIVE35 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 2. " ACTIVE34 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x04 1. " ACTIVE33 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x04 0. " ACTIVE32 ,Interrupt Active Flag" "Not active,Active" line.long 0x08 "ACTIVE3,Active Bit Register 3" bitfld.long 0x08 31. " ACTIVE95 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 30. " ACTIVE94 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 29. " ACTIVE93 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 28. " ACTIVE92 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 27. " ACTIVE91 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 26. " ACTIVE90 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 25. " ACTIVE89 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 24. " ACTIVE88 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 23. " ACTIVE87 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 22. " ACTIVE86 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 21. " ACTIVE85 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 20. " ACTIVE84 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 19. " ACTIVE83 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 18. " ACTIVE82 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 17. " ACTIVE81 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 16. " ACTIVE80 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 15. " ACTIVE79 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 14. " ACTIVE78 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 13. " ACTIVE77 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 12. " ACTIVE76 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 11. " ACTIVE75 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 10. " ACTIVE74 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 9. " ACTIVE73 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 8. " ACTIVE72 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 7. " ACTIVE71 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 6. " ACTIVE70 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 5. " ACTIVE69 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 4. " ACTIVE68 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 3. " ACTIVE67 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 2. " ACTIVE66 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x08 1. " ACTIVE65 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x08 0. " ACTIVE64 ,Interrupt Active Flag" "Not active,Active" line.long 0x0c "ACTIVE4,Active Bit Register 4" bitfld.long 0x0c 31. " ACTIVE127 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 30. " ACTIVE126 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 29. " ACTIVE125 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 28. " ACTIVE124 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 27. " ACTIVE123 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 26. " ACTIVE122 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 25. " ACTIVE121 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 24. " ACTIVE120 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 23. " ACTIVE119 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 22. " ACTIVE118 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 21. " ACTIVE117 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 20. " ACTIVE116 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 19. " ACTIVE115 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 18. " ACTIVE114 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 17. " ACTIVE113 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 16. " ACTIVE112 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 15. " ACTIVE111 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 14. " ACTIVE110 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 13. " ACTIVE109 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 12. " ACTIVE108 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 11. " ACTIVE107 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 10. " ACTIVE106 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 9. " ACTIVE105 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 8. " ACTIVE104 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 7. " ACTIVE103 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 6. " ACTIVE102 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 5. " ACTIVE101 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 4. " ACTIVE100 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 3. " ACTIVE99 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 2. " ACTIVE98 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x0c 1. " ACTIVE97 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x0c 0. " ACTIVE96 ,Interrupt Active Flag" "Not active,Active" line.long 0x10 "ACTIVE5,Active Bit Register 5" bitfld.long 0x10 31. " ACTIVE159 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 30. " ACTIVE158 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 29. " ACTIVE157 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 28. " ACTIVE156 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 27. " ACTIVE155 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 26. " ACTIVE154 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 25. " ACTIVE153 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 24. " ACTIVE152 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 23. " ACTIVE151 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 22. " ACTIVE150 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 21. " ACTIVE149 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 20. " ACTIVE148 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 19. " ACTIVE147 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 18. " ACTIVE146 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 17. " ACTIVE145 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 16. " ACTIVE144 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 15. " ACTIVE143 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 14. " ACTIVE142 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 13. " ACTIVE141 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 12. " ACTIVE140 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 11. " ACTIVE139 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 10. " ACTIVE138 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 9. " ACTIVE137 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 8. " ACTIVE136 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 7. " ACTIVE135 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 6. " ACTIVE134 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 5. " ACTIVE133 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 4. " ACTIVE132 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 3. " ACTIVE131 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 2. " ACTIVE130 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x10 1. " ACTIVE129 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x10 0. " ACTIVE128 ,Interrupt Active Flag" "Not active,Active" line.long 0x14 "ACTIVE6,Active Bit Register 6" bitfld.long 0x14 31. " ACTIVE191 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 30. " ACTIVE190 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 29. " ACTIVE189 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 28. " ACTIVE188 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 27. " ACTIVE187 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 26. " ACTIVE186 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 25. " ACTIVE185 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 24. " ACTIVE184 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 23. " ACTIVE183 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 22. " ACTIVE182 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 21. " ACTIVE181 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 20. " ACTIVE180 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 19. " ACTIVE179 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 18. " ACTIVE178 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 17. " ACTIVE177 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 16. " ACTIVE176 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 15. " ACTIVE175 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 14. " ACTIVE174 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 13. " ACTIVE173 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 12. " ACTIVE172 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 11. " ACTIVE171 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 10. " ACTIVE170 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 9. " ACTIVE169 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 8. " ACTIVE168 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 7. " ACTIVE167 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 6. " ACTIVE166 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 5. " ACTIVE165 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 4. " ACTIVE164 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 3. " ACTIVE163 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 2. " ACTIVE162 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x14 1. " ACTIVE161 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x14 0. " ACTIVE160 ,Interrupt Active Flag" "Not active,Active" line.long 0x18 "ACTIVE7,Active Bit Register 7" bitfld.long 0x18 31. " ACTIVE223 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 30. " ACTIVE222 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 29. " ACTIVE221 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 28. " ACTIVE220 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 27. " ACTIVE219 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 26. " ACTIVE218 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 25. " ACTIVE217 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 24. " ACTIVE216 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 23. " ACTIVE215 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 22. " ACTIVE214 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 21. " ACTIVE213 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 20. " ACTIVE212 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 19. " ACTIVE211 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 18. " ACTIVE210 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 17. " ACTIVE209 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 16. " ACTIVE208 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 15. " ACTIVE207 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 14. " ACTIVE206 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 13. " ACTIVE205 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 12. " ACTIVE204 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 11. " ACTIVE203 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 10. " ACTIVE202 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 9. " ACTIVE201 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 8. " ACTIVE200 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 7. " ACTIVE199 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 6. " ACTIVE198 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 5. " ACTIVE197 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 4. " ACTIVE196 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 3. " ACTIVE195 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 2. " ACTIVE194 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x18 1. " ACTIVE193 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x18 0. " ACTIVE192 ,Interrupt Active Flag" "Not active,Active" line.long 0x1c "ACTIVE8,Active Bit Register 8" bitfld.long 0x1c 15. " ACTIVE239 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 14. " ACTIVE238 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 13. " ACTIVE237 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 12. " ACTIVE236 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 11. " ACTIVE235 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 10. " ACTIVE234 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x1c 9. " ACTIVE233 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 8. " ACTIVE232 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 7. " ACTIVE231 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 6. " ACTIVE230 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 5. " ACTIVE229 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 4. " ACTIVE228 ,Interrupt Active Flag" "Not active,Active" textline " " bitfld.long 0x1c 3. " ACTIVE227 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 2. " ACTIVE226 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 1. " ACTIVE225 ,Interrupt Active Flag" "Not active,Active" bitfld.long 0x1c 0. " ACTIVE224 ,Interrupt Active Flag" "Not active,Active" else hgroup.long 0x300++0x1F hide.long 0x00 "ACTIVE1,Active Bit Register 1" hide.long 0x04 "ACTIVE2,Active Bit Register 2" hide.long 0x08 "ACTIVE3,Active Bit Register 3" hide.long 0x0c "ACTIVE4,Active Bit Register 4" hide.long 0x10 "ACTIVE5,Active Bit Register 5" hide.long 0x14 "ACTIVE6,Active Bit Register 6" hide.long 0x18 "ACTIVE7,Active Bit Register 7" hide.long 0x1c "ACTIVE8,Active Bit Register 8" endif tree.end tree "Interrupt Priority Registers" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x00) group.long 0x400++0x1F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x01) group.long 0x400++0x3F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x02) group.long 0x400++0x5F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x03) group.long 0x400++0x7F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x04) group.long 0x400++0x9F line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" line.long 0x80 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x84 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x88 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0x8C "IPR35,Interrupt Priority Register" hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x90 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x94 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x98 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x9C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x05) group.long 0x400++0xBF line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" line.long 0x80 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x84 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x88 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0x8C "IPR35,Interrupt Priority Register" hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x90 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x94 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x98 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x9C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" line.long 0xA0 "IPR40,Interrupt Priority Register" hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority" hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority" hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority" hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority" line.long 0xA4 "IPR41,Interrupt Priority Register" hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority" hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority" hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority" hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority" line.long 0xA8 "IPR42,Interrupt Priority Register" hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority" hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority" hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority" hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority" line.long 0xAC "IPR43,Interrupt Priority Register" hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority" hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority" hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority" hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority" line.long 0xB0 "IPR44,Interrupt Priority Register" hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority" hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority" hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority" hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority" line.long 0xB4 "IPR45,Interrupt Priority Register" hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority" hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority" hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority" hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority" line.long 0xB8 "IPR46,Interrupt Priority Register" hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority" hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority" hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority" hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority" line.long 0xBC "IPR47,Interrupt Priority Register" hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority" hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority" hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority" hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x06) group.long 0x400++0xDF line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" line.long 0x80 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x84 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x88 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0x8C "IPR35,Interrupt Priority Register" hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x90 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x94 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x98 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x9C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" line.long 0xA0 "IPR40,Interrupt Priority Register" hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority" hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority" hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority" hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority" line.long 0xA4 "IPR41,Interrupt Priority Register" hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority" hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority" hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority" hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority" line.long 0xA8 "IPR42,Interrupt Priority Register" hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority" hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority" hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority" hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority" line.long 0xAC "IPR43,Interrupt Priority Register" hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority" hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority" hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority" hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority" line.long 0xB0 "IPR44,Interrupt Priority Register" hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority" hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority" hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority" hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority" line.long 0xB4 "IPR45,Interrupt Priority Register" hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority" hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority" hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority" hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority" line.long 0xB8 "IPR46,Interrupt Priority Register" hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority" hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority" hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority" hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority" line.long 0xBC "IPR47,Interrupt Priority Register" hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority" hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority" hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority" hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority" line.long 0xC0 "IPR48,Interrupt Priority Register" hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority" hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority" hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority" hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority" line.long 0xC4 "IPR49,Interrupt Priority Register" hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority" hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority" hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority" hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority" line.long 0xC8 "IPR50,Interrupt Priority Register" hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority" hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority" hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority" hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority" line.long 0xCC "IPR51,Interrupt Priority Register" hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority" hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority" hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority" hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority" line.long 0xD0 "IPR52,Interrupt Priority Register" hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority" hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority" hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority" hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority" line.long 0xD4 "IPR53,Interrupt Priority Register" hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority" hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority" hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority" hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority" line.long 0xD8 "IPR54,Interrupt Priority Register" hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority" hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority" hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority" hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority" line.long 0xDC "IPR55,Interrupt Priority Register" hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority" hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority" hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority" hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0x04))&0x0F)==0x07) group.long 0x400++0xEF line.long 0x0 "IPR0,Interrupt Priority Register" hexmask.long.byte 0x0 24.--31. 1. " PRI_3 ,Interrupt 3 Priority" hexmask.long.byte 0x0 16.--23. 1. " PRI_2 ,Interrupt 2 Priority" hexmask.long.byte 0x0 8.--15. 1. " PRI_1 ,Interrupt 1 Priority" hexmask.long.byte 0x0 0.--7. 1. " PRI_0 ,Interrupt 0 Priority" line.long 0x4 "IPR1,Interrupt Priority Register" hexmask.long.byte 0x4 24.--31. 1. " PRI_7 ,Interrupt 7 Priority" hexmask.long.byte 0x4 16.--23. 1. " PRI_6 ,Interrupt 6 Priority" hexmask.long.byte 0x4 8.--15. 1. " PRI_5 ,Interrupt 5 Priority" hexmask.long.byte 0x4 0.--7. 1. " PRI_4 ,Interrupt 4 Priority" line.long 0x8 "IPR2,Interrupt Priority Register" hexmask.long.byte 0x8 24.--31. 1. " PRI_11 ,Interrupt 11 Priority" hexmask.long.byte 0x8 16.--23. 1. " PRI_10 ,Interrupt 10 Priority" hexmask.long.byte 0x8 8.--15. 1. " PRI_9 ,Interrupt 9 Priority" hexmask.long.byte 0x8 0.--7. 1. " PRI_8 ,Interrupt 8 Priority" line.long 0xC "IPR3,Interrupt Priority Register" hexmask.long.byte 0xC 24.--31. 1. " PRI_15 ,Interrupt 15 Priority" hexmask.long.byte 0xC 16.--23. 1. " PRI_14 ,Interrupt 14 Priority" hexmask.long.byte 0xC 8.--15. 1. " PRI_13 ,Interrupt 13 Priority" hexmask.long.byte 0xC 0.--7. 1. " PRI_12 ,Interrupt 12 Priority" line.long 0x10 "IPR4,Interrupt Priority Register" hexmask.long.byte 0x10 24.--31. 1. " PRI_19 ,Interrupt 19 Priority" hexmask.long.byte 0x10 16.--23. 1. " PRI_18 ,Interrupt 18 Priority" hexmask.long.byte 0x10 8.--15. 1. " PRI_17 ,Interrupt 17 Priority" hexmask.long.byte 0x10 0.--7. 1. " PRI_16 ,Interrupt 16 Priority" line.long 0x14 "IPR5,Interrupt Priority Register" hexmask.long.byte 0x14 24.--31. 1. " PRI_23 ,Interrupt 23 Priority" hexmask.long.byte 0x14 16.--23. 1. " PRI_22 ,Interrupt 22 Priority" hexmask.long.byte 0x14 8.--15. 1. " PRI_21 ,Interrupt 21 Priority" hexmask.long.byte 0x14 0.--7. 1. " PRI_20 ,Interrupt 20 Priority" line.long 0x18 "IPR6,Interrupt Priority Register" hexmask.long.byte 0x18 24.--31. 1. " PRI_27 ,Interrupt 27 Priority" hexmask.long.byte 0x18 16.--23. 1. " PRI_26 ,Interrupt 26 Priority" hexmask.long.byte 0x18 8.--15. 1. " PRI_25 ,Interrupt 25 Priority" hexmask.long.byte 0x18 0.--7. 1. " PRI_24 ,Interrupt 24 Priority" line.long 0x1C "IPR7,Interrupt Priority Register" hexmask.long.byte 0x1C 24.--31. 1. " PRI_31 ,Interrupt 31 Priority" hexmask.long.byte 0x1C 16.--23. 1. " PRI_30 ,Interrupt 30 Priority" hexmask.long.byte 0x1C 8.--15. 1. " PRI_29 ,Interrupt 29 Priority" hexmask.long.byte 0x1C 0.--7. 1. " PRI_28 ,Interrupt 28 Priority" line.long 0x20 "IPR8,Interrupt Priority Register" hexmask.long.byte 0x20 24.--31. 1. " PRI_35 ,Interrupt 35 Priority" hexmask.long.byte 0x20 16.--23. 1. " PRI_34 ,Interrupt 34 Priority" hexmask.long.byte 0x20 8.--15. 1. " PRI_33 ,Interrupt 33 Priority" hexmask.long.byte 0x20 0.--7. 1. " PRI_32 ,Interrupt 32 Priority" line.long 0x24 "IPR9,Interrupt Priority Register" hexmask.long.byte 0x24 24.--31. 1. " PRI_39 ,Interrupt 39 Priority" hexmask.long.byte 0x24 16.--23. 1. " PRI_38 ,Interrupt 38 Priority" hexmask.long.byte 0x24 8.--15. 1. " PRI_37 ,Interrupt 37 Priority" hexmask.long.byte 0x24 0.--7. 1. " PRI_36 ,Interrupt 36 Priority" line.long 0x28 "IPR10,Interrupt Priority Register" hexmask.long.byte 0x28 24.--31. 1. " PRI_43 ,Interrupt 43 Priority" hexmask.long.byte 0x28 16.--23. 1. " PRI_42 ,Interrupt 42 Priority" hexmask.long.byte 0x28 8.--15. 1. " PRI_41 ,Interrupt 41 Priority" hexmask.long.byte 0x28 0.--7. 1. " PRI_40 ,Interrupt 40 Priority" line.long 0x2C "IPR11,Interrupt Priority Register" hexmask.long.byte 0x2C 24.--31. 1. " PRI_47 ,Interrupt 47 Priority" hexmask.long.byte 0x2C 16.--23. 1. " PRI_46 ,Interrupt 46 Priority" hexmask.long.byte 0x2C 8.--15. 1. " PRI_45 ,Interrupt 45 Priority" hexmask.long.byte 0x2C 0.--7. 1. " PRI_44 ,Interrupt 44 Priority" line.long 0x30 "IPR12,Interrupt Priority Register" hexmask.long.byte 0x30 24.--31. 1. " PRI_51 ,Interrupt 51 Priority" hexmask.long.byte 0x30 16.--23. 1. " PRI_50 ,Interrupt 50 Priority" hexmask.long.byte 0x30 8.--15. 1. " PRI_49 ,Interrupt 49 Priority" hexmask.long.byte 0x30 0.--7. 1. " PRI_48 ,Interrupt 48 Priority" line.long 0x34 "IPR13,Interrupt Priority Register" hexmask.long.byte 0x34 24.--31. 1. " PRI_55 ,Interrupt 55 Priority" hexmask.long.byte 0x34 16.--23. 1. " PRI_54 ,Interrupt 54 Priority" hexmask.long.byte 0x34 8.--15. 1. " PRI_53 ,Interrupt 53 Priority" hexmask.long.byte 0x34 0.--7. 1. " PRI_52 ,Interrupt 52 Priority" line.long 0x38 "IPR14,Interrupt Priority Register" hexmask.long.byte 0x38 24.--31. 1. " PRI_59 ,Interrupt 59 Priority" hexmask.long.byte 0x38 16.--23. 1. " PRI_58 ,Interrupt 58 Priority" hexmask.long.byte 0x38 8.--15. 1. " PRI_57 ,Interrupt 57 Priority" hexmask.long.byte 0x38 0.--7. 1. " PRI_56 ,Interrupt 56 Priority" line.long 0x3C "IPR15,Interrupt Priority Register" hexmask.long.byte 0x3C 24.--31. 1. " PRI_63 ,Interrupt 63 Priority" hexmask.long.byte 0x3C 16.--23. 1. " PRI_62 ,Interrupt 62 Priority" hexmask.long.byte 0x3C 8.--15. 1. " PRI_61 ,Interrupt 61 Priority" hexmask.long.byte 0x3C 0.--7. 1. " PRI_60 ,Interrupt 60 Priority" line.long 0x40 "IPR16,Interrupt Priority Register" hexmask.long.byte 0x40 24.--31. 1. " PRI_67 ,Interrupt 67 Priority" hexmask.long.byte 0x40 16.--23. 1. " PRI_66 ,Interrupt 66 Priority" hexmask.long.byte 0x40 8.--15. 1. " PRI_65 ,Interrupt 65 Priority" hexmask.long.byte 0x40 0.--7. 1. " PRI_64 ,Interrupt 64 Priority" line.long 0x44 "IPR17,Interrupt Priority Register" hexmask.long.byte 0x44 24.--31. 1. " PRI_71 ,Interrupt 71 Priority" hexmask.long.byte 0x44 16.--23. 1. " PRI_70 ,Interrupt 70 Priority" hexmask.long.byte 0x44 8.--15. 1. " PRI_69 ,Interrupt 69 Priority" hexmask.long.byte 0x44 0.--7. 1. " PRI_68 ,Interrupt 68 Priority" line.long 0x48 "IPR18,Interrupt Priority Register" hexmask.long.byte 0x48 24.--31. 1. " PRI_75 ,Interrupt 75 Priority" hexmask.long.byte 0x48 16.--23. 1. " PRI_74 ,Interrupt 74 Priority" hexmask.long.byte 0x48 8.--15. 1. " PRI_73 ,Interrupt 73 Priority" hexmask.long.byte 0x48 0.--7. 1. " PRI_72 ,Interrupt 72 Priority" line.long 0x4C "IPR19,Interrupt Priority Register" hexmask.long.byte 0x4C 24.--31. 1. " PRI_79 ,Interrupt 79 Priority" hexmask.long.byte 0x4C 16.--23. 1. " PRI_78 ,Interrupt 78 Priority" hexmask.long.byte 0x4C 8.--15. 1. " PRI_77 ,Interrupt 77 Priority" hexmask.long.byte 0x4C 0.--7. 1. " PRI_76 ,Interrupt 76 Priority" line.long 0x50 "IPR20,Interrupt Priority Register" hexmask.long.byte 0x50 24.--31. 1. " PRI_83 ,Interrupt 83 Priority" hexmask.long.byte 0x50 16.--23. 1. " PRI_82 ,Interrupt 82 Priority" hexmask.long.byte 0x50 8.--15. 1. " PRI_81 ,Interrupt 81 Priority" hexmask.long.byte 0x50 0.--7. 1. " PRI_80 ,Interrupt 80 Priority" line.long 0x54 "IPR21,Interrupt Priority Register" hexmask.long.byte 0x54 24.--31. 1. " PRI_87 ,Interrupt 87 Priority" hexmask.long.byte 0x54 16.--23. 1. " PRI_86 ,Interrupt 86 Priority" hexmask.long.byte 0x54 8.--15. 1. " PRI_85 ,Interrupt 85 Priority" hexmask.long.byte 0x54 0.--7. 1. " PRI_84 ,Interrupt 84 Priority" line.long 0x58 "IPR22,Interrupt Priority Register" hexmask.long.byte 0x58 24.--31. 1. " PRI_91 ,Interrupt 91 Priority" hexmask.long.byte 0x58 16.--23. 1. " PRI_90 ,Interrupt 90 Priority" hexmask.long.byte 0x58 8.--15. 1. " PRI_89 ,Interrupt 89 Priority" hexmask.long.byte 0x58 0.--7. 1. " PRI_88 ,Interrupt 88 Priority" line.long 0x5C "IPR23,Interrupt Priority Register" hexmask.long.byte 0x5C 24.--31. 1. " PRI_95 ,Interrupt 95 Priority" hexmask.long.byte 0x5C 16.--23. 1. " PRI_94 ,Interrupt 94 Priority" hexmask.long.byte 0x5C 8.--15. 1. " PRI_93 ,Interrupt 93 Priority" hexmask.long.byte 0x5C 0.--7. 1. " PRI_92 ,Interrupt 92 Priority" line.long 0x60 "IPR24,Interrupt Priority Register" hexmask.long.byte 0x60 24.--31. 1. " PRI_99 ,Interrupt 99 Priority" hexmask.long.byte 0x60 16.--23. 1. " PRI_98 ,Interrupt 98 Priority" hexmask.long.byte 0x60 8.--15. 1. " PRI_97 ,Interrupt 97 Priority" hexmask.long.byte 0x60 0.--7. 1. " PRI_96 ,Interrupt 96 Priority" line.long 0x64 "IPR25,Interrupt Priority Register" hexmask.long.byte 0x64 24.--31. 1. " PRI_103 ,Interrupt 103 Priority" hexmask.long.byte 0x64 16.--23. 1. " PRI_102 ,Interrupt 102 Priority" hexmask.long.byte 0x64 8.--15. 1. " PRI_101 ,Interrupt 101 Priority" hexmask.long.byte 0x64 0.--7. 1. " PRI_100 ,Interrupt 100 Priority" line.long 0x68 "IPR26,Interrupt Priority Register" hexmask.long.byte 0x68 24.--31. 1. " PRI_107 ,Interrupt 107 Priority" hexmask.long.byte 0x68 16.--23. 1. " PRI_106 ,Interrupt 106 Priority" hexmask.long.byte 0x68 8.--15. 1. " PRI_105 ,Interrupt 105 Priority" hexmask.long.byte 0x68 0.--7. 1. " PRI_104 ,Interrupt 104 Priority" line.long 0x6C "IPR27,Interrupt Priority Register" hexmask.long.byte 0x6C 24.--31. 1. " PRI_111 ,Interrupt 111 Priority" hexmask.long.byte 0x6C 16.--23. 1. " PRI_110 ,Interrupt 110 Priority" hexmask.long.byte 0x6C 8.--15. 1. " PRI_109 ,Interrupt 109 Priority" hexmask.long.byte 0x6C 0.--7. 1. " PRI_108 ,Interrupt 108 Priority" line.long 0x70 "IPR28,Interrupt Priority Register" hexmask.long.byte 0x70 24.--31. 1. " PRI_115 ,Interrupt 115 Priority" hexmask.long.byte 0x70 16.--23. 1. " PRI_114 ,Interrupt 114 Priority" hexmask.long.byte 0x70 8.--15. 1. " PRI_113 ,Interrupt 113 Priority" hexmask.long.byte 0x70 0.--7. 1. " PRI_112 ,Interrupt 112 Priority" line.long 0x74 "IPR29,Interrupt Priority Register" hexmask.long.byte 0x74 24.--31. 1. " PRI_119 ,Interrupt 119 Priority" hexmask.long.byte 0x74 16.--23. 1. " PRI_118 ,Interrupt 118 Priority" hexmask.long.byte 0x74 8.--15. 1. " PRI_117 ,Interrupt 117 Priority" hexmask.long.byte 0x74 0.--7. 1. " PRI_116 ,Interrupt 116 Priority" line.long 0x78 "IPR30,Interrupt Priority Register" hexmask.long.byte 0x78 24.--31. 1. " PRI_123 ,Interrupt 123 Priority" hexmask.long.byte 0x78 16.--23. 1. " PRI_122 ,Interrupt 122 Priority" hexmask.long.byte 0x78 8.--15. 1. " PRI_121 ,Interrupt 121 Priority" hexmask.long.byte 0x78 0.--7. 1. " PRI_120 ,Interrupt 120 Priority" line.long 0x7C "IPR31,Interrupt Priority Register" hexmask.long.byte 0x7C 24.--31. 1. " PRI_127 ,Interrupt 127 Priority" hexmask.long.byte 0x7C 16.--23. 1. " PRI_126 ,Interrupt 126 Priority" hexmask.long.byte 0x7C 8.--15. 1. " PRI_125 ,Interrupt 125 Priority" hexmask.long.byte 0x7C 0.--7. 1. " PRI_124 ,Interrupt 124 Priority" line.long 0x80 "IPR32,Interrupt Priority Register" hexmask.long.byte 0x80 24.--31. 1. " PRI_131 ,Interrupt 131 Priority" hexmask.long.byte 0x80 16.--23. 1. " PRI_130 ,Interrupt 130 Priority" hexmask.long.byte 0x80 8.--15. 1. " PRI_129 ,Interrupt 129 Priority" hexmask.long.byte 0x80 0.--7. 1. " PRI_128 ,Interrupt 128 Priority" line.long 0x84 "IPR33,Interrupt Priority Register" hexmask.long.byte 0x84 24.--31. 1. " PRI_135 ,Interrupt 135 Priority" hexmask.long.byte 0x84 16.--23. 1. " PRI_134 ,Interrupt 134 Priority" hexmask.long.byte 0x84 8.--15. 1. " PRI_133 ,Interrupt 133 Priority" hexmask.long.byte 0x84 0.--7. 1. " PRI_132 ,Interrupt 132 Priority" line.long 0x88 "IPR34,Interrupt Priority Register" hexmask.long.byte 0x88 24.--31. 1. " PRI_139 ,Interrupt 139 Priority" hexmask.long.byte 0x88 16.--23. 1. " PRI_138 ,Interrupt 138 Priority" hexmask.long.byte 0x88 8.--15. 1. " PRI_137 ,Interrupt 137 Priority" hexmask.long.byte 0x88 0.--7. 1. " PRI_136 ,Interrupt 136 Priority" line.long 0x8C "IPR35,Interrupt Priority Register" hexmask.long.byte 0x8C 24.--31. 1. " PRI_143 ,Interrupt 143 Priority" hexmask.long.byte 0x8C 16.--23. 1. " PRI_142 ,Interrupt 142 Priority" hexmask.long.byte 0x8C 8.--15. 1. " PRI_141 ,Interrupt 141 Priority" hexmask.long.byte 0x8C 0.--7. 1. " PRI_140 ,Interrupt 140 Priority" line.long 0x90 "IPR36,Interrupt Priority Register" hexmask.long.byte 0x90 24.--31. 1. " PRI_147 ,Interrupt 147 Priority" hexmask.long.byte 0x90 16.--23. 1. " PRI_146 ,Interrupt 146 Priority" hexmask.long.byte 0x90 8.--15. 1. " PRI_145 ,Interrupt 145 Priority" hexmask.long.byte 0x90 0.--7. 1. " PRI_144 ,Interrupt 144 Priority" line.long 0x94 "IPR37,Interrupt Priority Register" hexmask.long.byte 0x94 24.--31. 1. " PRI_151 ,Interrupt 151 Priority" hexmask.long.byte 0x94 16.--23. 1. " PRI_150 ,Interrupt 150 Priority" hexmask.long.byte 0x94 8.--15. 1. " PRI_149 ,Interrupt 149 Priority" hexmask.long.byte 0x94 0.--7. 1. " PRI_148 ,Interrupt 148 Priority" line.long 0x98 "IPR38,Interrupt Priority Register" hexmask.long.byte 0x98 24.--31. 1. " PRI_155 ,Interrupt 155 Priority" hexmask.long.byte 0x98 16.--23. 1. " PRI_154 ,Interrupt 154 Priority" hexmask.long.byte 0x98 8.--15. 1. " PRI_153 ,Interrupt 153 Priority" hexmask.long.byte 0x98 0.--7. 1. " PRI_152 ,Interrupt 152 Priority" line.long 0x9C "IPR39,Interrupt Priority Register" hexmask.long.byte 0x9C 24.--31. 1. " PRI_159 ,Interrupt 159 Priority" hexmask.long.byte 0x9C 16.--23. 1. " PRI_158 ,Interrupt 158 Priority" hexmask.long.byte 0x9C 8.--15. 1. " PRI_157 ,Interrupt 157 Priority" hexmask.long.byte 0x9C 0.--7. 1. " PRI_156 ,Interrupt 156 Priority" line.long 0xA0 "IPR40,Interrupt Priority Register" hexmask.long.byte 0xA0 24.--31. 1. " PRI_163 ,Interrupt 163 Priority" hexmask.long.byte 0xA0 16.--23. 1. " PRI_162 ,Interrupt 162 Priority" hexmask.long.byte 0xA0 8.--15. 1. " PRI_161 ,Interrupt 161 Priority" hexmask.long.byte 0xA0 0.--7. 1. " PRI_160 ,Interrupt 160 Priority" line.long 0xA4 "IPR41,Interrupt Priority Register" hexmask.long.byte 0xA4 24.--31. 1. " PRI_167 ,Interrupt 167 Priority" hexmask.long.byte 0xA4 16.--23. 1. " PRI_166 ,Interrupt 166 Priority" hexmask.long.byte 0xA4 8.--15. 1. " PRI_165 ,Interrupt 165 Priority" hexmask.long.byte 0xA4 0.--7. 1. " PRI_164 ,Interrupt 164 Priority" line.long 0xA8 "IPR42,Interrupt Priority Register" hexmask.long.byte 0xA8 24.--31. 1. " PRI_171 ,Interrupt 171 Priority" hexmask.long.byte 0xA8 16.--23. 1. " PRI_170 ,Interrupt 170 Priority" hexmask.long.byte 0xA8 8.--15. 1. " PRI_169 ,Interrupt 169 Priority" hexmask.long.byte 0xA8 0.--7. 1. " PRI_168 ,Interrupt 168 Priority" line.long 0xAC "IPR43,Interrupt Priority Register" hexmask.long.byte 0xAC 24.--31. 1. " PRI_175 ,Interrupt 175 Priority" hexmask.long.byte 0xAC 16.--23. 1. " PRI_174 ,Interrupt 174 Priority" hexmask.long.byte 0xAC 8.--15. 1. " PRI_173 ,Interrupt 173 Priority" hexmask.long.byte 0xAC 0.--7. 1. " PRI_172 ,Interrupt 172 Priority" line.long 0xB0 "IPR44,Interrupt Priority Register" hexmask.long.byte 0xB0 24.--31. 1. " PRI_179 ,Interrupt 179 Priority" hexmask.long.byte 0xB0 16.--23. 1. " PRI_178 ,Interrupt 178 Priority" hexmask.long.byte 0xB0 8.--15. 1. " PRI_177 ,Interrupt 177 Priority" hexmask.long.byte 0xB0 0.--7. 1. " PRI_176 ,Interrupt 176 Priority" line.long 0xB4 "IPR45,Interrupt Priority Register" hexmask.long.byte 0xB4 24.--31. 1. " PRI_183 ,Interrupt 183 Priority" hexmask.long.byte 0xB4 16.--23. 1. " PRI_182 ,Interrupt 182 Priority" hexmask.long.byte 0xB4 8.--15. 1. " PRI_181 ,Interrupt 181 Priority" hexmask.long.byte 0xB4 0.--7. 1. " PRI_180 ,Interrupt 180 Priority" line.long 0xB8 "IPR46,Interrupt Priority Register" hexmask.long.byte 0xB8 24.--31. 1. " PRI_187 ,Interrupt 187 Priority" hexmask.long.byte 0xB8 16.--23. 1. " PRI_186 ,Interrupt 186 Priority" hexmask.long.byte 0xB8 8.--15. 1. " PRI_185 ,Interrupt 185 Priority" hexmask.long.byte 0xB8 0.--7. 1. " PRI_184 ,Interrupt 184 Priority" line.long 0xBC "IPR47,Interrupt Priority Register" hexmask.long.byte 0xBC 24.--31. 1. " PRI_191 ,Interrupt 191 Priority" hexmask.long.byte 0xBC 16.--23. 1. " PRI_190 ,Interrupt 190 Priority" hexmask.long.byte 0xBC 8.--15. 1. " PRI_189 ,Interrupt 189 Priority" hexmask.long.byte 0xBC 0.--7. 1. " PRI_188 ,Interrupt 188 Priority" line.long 0xC0 "IPR48,Interrupt Priority Register" hexmask.long.byte 0xC0 24.--31. 1. " PRI_195 ,Interrupt 195 Priority" hexmask.long.byte 0xC0 16.--23. 1. " PRI_194 ,Interrupt 194 Priority" hexmask.long.byte 0xC0 8.--15. 1. " PRI_193 ,Interrupt 193 Priority" hexmask.long.byte 0xC0 0.--7. 1. " PRI_192 ,Interrupt 192 Priority" line.long 0xC4 "IPR49,Interrupt Priority Register" hexmask.long.byte 0xC4 24.--31. 1. " PRI_199 ,Interrupt 199 Priority" hexmask.long.byte 0xC4 16.--23. 1. " PRI_198 ,Interrupt 198 Priority" hexmask.long.byte 0xC4 8.--15. 1. " PRI_197 ,Interrupt 197 Priority" hexmask.long.byte 0xC4 0.--7. 1. " PRI_196 ,Interrupt 196 Priority" line.long 0xC8 "IPR50,Interrupt Priority Register" hexmask.long.byte 0xC8 24.--31. 1. " PRI_203 ,Interrupt 203 Priority" hexmask.long.byte 0xC8 16.--23. 1. " PRI_202 ,Interrupt 202 Priority" hexmask.long.byte 0xC8 8.--15. 1. " PRI_201 ,Interrupt 201 Priority" hexmask.long.byte 0xC8 0.--7. 1. " PRI_200 ,Interrupt 200 Priority" line.long 0xCC "IPR51,Interrupt Priority Register" hexmask.long.byte 0xCC 24.--31. 1. " PRI_207 ,Interrupt 207 Priority" hexmask.long.byte 0xCC 16.--23. 1. " PRI_206 ,Interrupt 206 Priority" hexmask.long.byte 0xCC 8.--15. 1. " PRI_205 ,Interrupt 205 Priority" hexmask.long.byte 0xCC 0.--7. 1. " PRI_204 ,Interrupt 204 Priority" line.long 0xD0 "IPR52,Interrupt Priority Register" hexmask.long.byte 0xD0 24.--31. 1. " PRI_211 ,Interrupt 211 Priority" hexmask.long.byte 0xD0 16.--23. 1. " PRI_210 ,Interrupt 210 Priority" hexmask.long.byte 0xD0 8.--15. 1. " PRI_209 ,Interrupt 209 Priority" hexmask.long.byte 0xD0 0.--7. 1. " PRI_208 ,Interrupt 208 Priority" line.long 0xD4 "IPR53,Interrupt Priority Register" hexmask.long.byte 0xD4 24.--31. 1. " PRI_215 ,Interrupt 215 Priority" hexmask.long.byte 0xD4 16.--23. 1. " PRI_214 ,Interrupt 214 Priority" hexmask.long.byte 0xD4 8.--15. 1. " PRI_213 ,Interrupt 213 Priority" hexmask.long.byte 0xD4 0.--7. 1. " PRI_212 ,Interrupt 212 Priority" line.long 0xD8 "IPR54,Interrupt Priority Register" hexmask.long.byte 0xD8 24.--31. 1. " PRI_219 ,Interrupt 219 Priority" hexmask.long.byte 0xD8 16.--23. 1. " PRI_218 ,Interrupt 218 Priority" hexmask.long.byte 0xD8 8.--15. 1. " PRI_217 ,Interrupt 217 Priority" hexmask.long.byte 0xD8 0.--7. 1. " PRI_216 ,Interrupt 216 Priority" line.long 0xDC "IPR55,Interrupt Priority Register" hexmask.long.byte 0xDC 24.--31. 1. " PRI_223 ,Interrupt 223 Priority" hexmask.long.byte 0xDC 16.--23. 1. " PRI_222 ,Interrupt 222 Priority" hexmask.long.byte 0xDC 8.--15. 1. " PRI_221 ,Interrupt 221 Priority" hexmask.long.byte 0xDC 0.--7. 1. " PRI_220 ,Interrupt 220 Priority" line.long 0xE0 "IPR56,Interrupt Priority Register" hexmask.long.byte 0xE0 24.--31. 1. " PRI_227 ,Interrupt 227 Priority" hexmask.long.byte 0xE0 16.--23. 1. " PRI_226 ,Interrupt 226 Priority" hexmask.long.byte 0xE0 8.--15. 1. " PRI_225 ,Interrupt 225 Priority" hexmask.long.byte 0xE0 0.--7. 1. " PRI_224 ,Interrupt 224 Priority" line.long 0xE4 "IPR57,Interrupt Priority Register" hexmask.long.byte 0xE4 24.--31. 1. " PRI_231 ,Interrupt 231 Priority" hexmask.long.byte 0xE4 16.--23. 1. " PRI_230 ,Interrupt 230 Priority" hexmask.long.byte 0xE4 8.--15. 1. " PRI_229 ,Interrupt 229 Priority" hexmask.long.byte 0xE4 0.--7. 1. " PRI_228 ,Interrupt 228 Priority" line.long 0xE8 "IPR58,Interrupt Priority Register" hexmask.long.byte 0xE8 24.--31. 1. " PRI_235 ,Interrupt 235 Priority" hexmask.long.byte 0xE8 16.--23. 1. " PRI_234 ,Interrupt 234 Priority" hexmask.long.byte 0xE8 8.--15. 1. " PRI_233 ,Interrupt 233 Priority" hexmask.long.byte 0xE8 0.--7. 1. " PRI_232 ,Interrupt 232 Priority" line.long 0xEC "IPR59,Interrupt Priority Register" hexmask.long.byte 0xEC 24.--31. 1. " PRI_239 ,Interrupt 239 Priority" hexmask.long.byte 0xEC 16.--23. 1. " PRI_238 ,Interrupt 238 Priority" hexmask.long.byte 0xEC 8.--15. 1. " PRI_237 ,Interrupt 237 Priority" hexmask.long.byte 0xEC 0.--7. 1. " PRI_236 ,Interrupt 236 Priority" else hgroup.long 0x400++0xEF hide.long 0x0 "IPR0,Interrupt Priority Register" hide.long 0x4 "IPR1,Interrupt Priority Register" hide.long 0x8 "IPR2,Interrupt Priority Register" hide.long 0xC "IPR3,Interrupt Priority Register" hide.long 0x10 "IPR4,Interrupt Priority Register" hide.long 0x14 "IPR5,Interrupt Priority Register" hide.long 0x18 "IPR6,Interrupt Priority Register" hide.long 0x1C "IPR7,Interrupt Priority Register" hide.long 0x20 "IPR8,Interrupt Priority Register" hide.long 0x24 "IPR9,Interrupt Priority Register" hide.long 0x28 "IPR10,Interrupt Priority Register" hide.long 0x2C "IPR11,Interrupt Priority Register" hide.long 0x30 "IPR12,Interrupt Priority Register" hide.long 0x34 "IPR13,Interrupt Priority Register" hide.long 0x38 "IPR14,Interrupt Priority Register" hide.long 0x3C "IPR15,Interrupt Priority Register" hide.long 0x40 "IPR16,Interrupt Priority Register" hide.long 0x44 "IPR17,Interrupt Priority Register" hide.long 0x48 "IPR18,Interrupt Priority Register" hide.long 0x4C "IPR19,Interrupt Priority Register" hide.long 0x50 "IPR20,Interrupt Priority Register" hide.long 0x54 "IPR21,Interrupt Priority Register" hide.long 0x58 "IPR22,Interrupt Priority Register" hide.long 0x5C "IPR23,Interrupt Priority Register" hide.long 0x60 "IPR24,Interrupt Priority Register" hide.long 0x64 "IPR25,Interrupt Priority Register" hide.long 0x68 "IPR26,Interrupt Priority Register" hide.long 0x6C "IPR27,Interrupt Priority Register" hide.long 0x70 "IPR28,Interrupt Priority Register" hide.long 0x74 "IPR29,Interrupt Priority Register" hide.long 0x78 "IPR30,Interrupt Priority Register" hide.long 0x7C "IPR31,Interrupt Priority Register" hide.long 0x80 "IPR32,Interrupt Priority Register" hide.long 0x84 "IPR33,Interrupt Priority Register" hide.long 0x88 "IPR34,Interrupt Priority Register" hide.long 0x8C "IPR35,Interrupt Priority Register" hide.long 0x90 "IPR36,Interrupt Priority Register" hide.long 0x94 "IPR37,Interrupt Priority Register" hide.long 0x98 "IPR38,Interrupt Priority Register" hide.long 0x9C "IPR39,Interrupt Priority Register" hide.long 0xA0 "IPR40,Interrupt Priority Register" hide.long 0xA4 "IPR41,Interrupt Priority Register" hide.long 0xA8 "IPR42,Interrupt Priority Register" hide.long 0xAC "IPR43,Interrupt Priority Register" hide.long 0xB0 "IPR44,Interrupt Priority Register" hide.long 0xB4 "IPR45,Interrupt Priority Register" hide.long 0xB8 "IPR46,Interrupt Priority Register" hide.long 0xBC "IPR47,Interrupt Priority Register" hide.long 0xC0 "IPR48,Interrupt Priority Register" hide.long 0xC4 "IPR49,Interrupt Priority Register" hide.long 0xC8 "IPR50,Interrupt Priority Register" hide.long 0xCC "IPR51,Interrupt Priority Register" hide.long 0xD0 "IPR52,Interrupt Priority Register" hide.long 0xD4 "IPR53,Interrupt Priority Register" hide.long 0xD8 "IPR54,Interrupt Priority Register" hide.long 0xDC "IPR55,Interrupt Priority Register" hide.long 0xE0 "IPR56,Interrupt Priority Register" hide.long 0xE4 "IPR57,Interrupt Priority Register" hide.long 0xE8 "IPR58,Interrupt Priority Register" hide.long 0xEC "IPR59,Interrupt Priority Register" endif tree.end width 0x0b else newline textline "COREDEBUG component base address not specified" newline endif tree.end sif CORENAME()=="CORTEXM4F" tree "Floating-point Unit (FPU)" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 8. group.long 0xF34++0x0B line.long 0x00 "FPCCR,Floating-Point Context Control Register" bitfld.long 0x00 31. " ASPEN ,Execution of a floating-point instruction sets the CONTROL.FPCA bit to 1" "Disabled,Enabled" bitfld.long 0x00 30. " LSPEN ,Enables lazy context save of FP state" "Disabled,Enabled" bitfld.long 0x00 8. " MONRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the DebugMonitor exception to pending" "Not able,Able" textline " " bitfld.long 0x00 6. " BFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the BusFault exception to pending" "Not able,Able" bitfld.long 0x00 5. " MMRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the MemManage exception to pending" "Not able,Able" bitfld.long 0x00 4. " HFRDY ,Indicates whether the software executing when the processor allocated the FP stack frame was able to set the HardFault exception to pending" "Not able,Able" textline " " bitfld.long 0x00 3. " THREAD ,Indicates the processor mode when it allocated the FP stack frame" "Handler,Thread" bitfld.long 0x00 1. " USER ,Indicates the privilege level of the software executing" "Privileged,Unprivileged" bitfld.long 0x00 0. " LSPACT ,Indicates whether Lazy preservation of the FP state is active" "Not active,Active" line.long 0x04 "FPCAR,Floating-Point Context Address Register" hexmask.long 0x04 3.--31. 0x8 " ADDRESS ,The location of the unpopulated floating-point register space allocated on an exception stack frame" line.long 0x08 "FPDSCR,Floating-Point Default Status Control Register" bitfld.long 0x08 26. " AHP ,Default value for FPSCR.AHP" "IEEE 754-2008,Alternative" bitfld.long 0x08 25. " DN ,Default value for FPSCR.DN" "NaN operands,Any operation" bitfld.long 0x08 24. " FZ ,Default value for FPSCR.FZ" "No Flush mode,Flush mode" textline " " bitfld.long 0x08 22.--23. " RMODE ,Default value for FPSCR.RMode" "Round to Nearest,Round towards Plus Infinity,Round towards Minus Infinity,Round towards Zero" rgroup.long 0xF40++0x07 line.long 0x00 "MVFR0,Media and FP Feature Register 0" bitfld.long 0x00 28.--31. " FPRNDMOD ,Indicates the rounding modes supported by the FP floating-point hardware" ",All supported,?..." bitfld.long 0x00 24.--27. " SRTERR ,Indicates the hardware support for FP short vectors" "Not supported,?..." bitfld.long 0x00 20.--23. " SQRROOT ,Indicates the hardware support for FP square root operations" ",Supported,?..." textline " " bitfld.long 0x00 16.--19. " DIV ,Indicates the hardware support for FP divide operations" ",Supported,?..." bitfld.long 0x00 12.--15. " FPEXTRP ,Indicates whether the FP hardware implementation supports exception trapping" "Not supported,?..." bitfld.long 0x00 8.--11. " DBLPREC ,Indicates the hardware support for FP double_precision operations" "Not supported,,Supported,?..." textline " " bitfld.long 0x00 4.--7. " SNGLPREC ,Indicates the hardware support for FP single-precision operations" ",,Supported,?..." bitfld.long 0x00 0.--3. " A_SIMD ,Indicates the size of the FP register bank" ",Supported-16x64-bit,?..." line.long 0x04 "MVFR1,Media and FP Feature Register 1" bitfld.long 0x04 28.--31. " FP_FUSED_MAC ,Indicates whether the FP supports fused multiply accumulate operations" ",Supported,?..." bitfld.long 0x04 24.--27. " FP_HPFP ,Indicates whether the FP supports half-precision and double-precision floating-point conversion instructions" ",Half-single,Half-single and half-double,?..." textline " " bitfld.long 0x04 4.--7. " D_NAN ,Indicates whether the FP hardware implementation supports only the Default NaN mode" ",NaN propagation,?..." bitfld.long 0x04 0.--3. " FTZ_MODE ,Indicates whether the FP hardware implementation supports only the Flush-to-Zero mode of operation" ",Full denorm. num. arit.,?..." width 0xB else newline textline "COREDEBUG component base address not specified" newline endif tree.end endif tree "Debug" tree "Core Debug" sif COMPonent.AVAILABLE("COREDEBUG") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1)) width 7. group.long 0xD30++0x03 line.long 0x00 "DFSR,Debug Fault Status Register" eventfld.long 0x00 4. " EXTERNAL ,Indicates a debug event generated because of the assertion of an external debug request" "Not generated,Generated" eventfld.long 0x00 3. " VCATCH ,Indicates triggering of a Vector catch" "Not triggered,Triggered" eventfld.long 0x00 2. " DWTTRAP ,Indicates a debug event generated by the DWT" "Not generated,Generated" newline eventfld.long 0x00 1. " BKPT ,Indicates a debug event generated by BKPT instruction execution or a breakpoint match in FPB" "Not generated,Generated" eventfld.long 0x00 0. " HALTED ,Indicates a debug event generated by either a C_HALT or C_STEP request, triggered by a write to the DHCSR or a step request triggered by setting DEMCR.MON_STEP to 1" "Not generated,Generated" newline hgroup.long 0xDF0++0x03 hide.long 0x00 "DHCSR,Debug Halting Control and Status Register" in newline wgroup.long 0xDF4++0x03 line.long 0x00 "DCRSR,Debug Core Register Selector Register" bitfld.long 0x00 16. " REGWNR ,Register Read/Write" "Read,Write" hexmask.long.byte 0x00 0.--6. 1. " REGSEL ,Specifies the ARM core register or special-purpose register or Floating-point extension register" group.long 0xDF8++0x03 line.long 0x00 "DCRDR,Debug Core Register Data Register" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("COREDEBUG",-1))+0xDFC))&0x10000)==0x10000) group.long 0xDFC++0x03 line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled" bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1" bitfld.long 0x00 18. " MON_STEP ,Setting this bit to 1 makes the step request pending" "No step,Step" newline bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending" bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled" bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled" newline bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled" bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled" bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled" newline bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled" bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled" bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled" newline bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled" else group.long 0xDFC++0x03 line.long 0x00 "DEMCR,Debug Exception and Monitor Control Register" bitfld.long 0x00 24. " TRCENA ,Global enable for all DWT and ITM features" "Disabled,Enabled" bitfld.long 0x00 19. " MON_REQ ,DebugMonitor semaphore bit" "0,1" newline bitfld.long 0x00 17. " MON_PEND ,Sets or clears the pending state of the DebugMonitor exception" "Not pending,Pending" bitfld.long 0x00 16. " MON_EN ,Enable the DebugMonitor exception" "Disabled,Enabled" bitfld.long 0x00 10. " VC_HARDERR ,Enable halting debug trap on a HardFault exception" "Disabled,Enabled" newline bitfld.long 0x00 9. " VC_INTERR ,Enable halting debug trap" "Disabled,Enabled" bitfld.long 0x00 8. " VC_BUSERR ,Enable halting debug trap on a BusFault exception" "Disabled,Enabled" bitfld.long 0x00 7. " VC_STATERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled" newline bitfld.long 0x00 6. " VC_CHKERR ,Enable halting debug trap on a UsageFault exception" "Disabled,Enabled" bitfld.long 0x00 5. " VC_NOCPERR ,Enable halting debug trap on a UsageFault caused by an access to a Coprocessor" "Disabled,Enabled" bitfld.long 0x00 4. " VC_MMERR ,Enable halting debug trap on a MemManage exception" "Disabled,Enabled" newline bitfld.long 0x00 0. " VC_CORERESET ,Enable Reset Vector Catch" "Disabled,Enabled" endif width 0x0B else newline textline "COREDEBUG component base address not specified" newline endif tree.end tree "Flash Patch and Breakpoint Unit (FPB)" sif COMPonent.AVAILABLE("FPB") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1)) width 10. group.long 0x00++0x07 line.long 0x00 "FP_CTRL,Flash Patch Control Register" bitfld.long 0x00 28.--31. " REV ,Flash Patch Breakpoint architecture revision" "Version 1,Version 2,?..." rbitfld.long 0x00 4.--7. 12.--14. " NUM_CODE ,The number of instruction address comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127" bitfld.long 0x00 1. " KEY ,Key Field" "Low,High" bitfld.long 0x00 0. " ENABLE ,Flash Patch Unit Enable" "Disabled,Enabled" textline "" line.long 0x04 "FP_REMAP,Flash Patch Remap Register" bitfld.long 0x04 29. " RMPSPT ,Indicates whether the FPB unit supports flash patch remap" "Not supported,SRAM region" hexmask.long.tbyte 0x04 5.--28. 0x20 " REMAP ,Remap Base Address Field" if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x8))&0x01)==0x00) group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x8++0x03 line.long 0x00 "FP_COMP0,Flash Patch Comparator Register 0" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0xC))&0x01)==0x00) group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0xC++0x03 line.long 0x00 "FP_COMP1,Flash Patch Comparator Register 1" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x10))&0x01)==0x00) group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x10++0x03 line.long 0x00 "FP_COMP2,Flash Patch Comparator Register 2" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x14))&0x01)==0x00) group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x14++0x03 line.long 0x00 "FP_COMP3,Flash Patch Comparator Register 3" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x18))&0x01)==0x00) group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x18++0x03 line.long 0x00 "FP_COMP4,Flash Patch Comparator Register 4" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x1C))&0x01)==0x00) group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x1C++0x03 line.long 0x00 "FP_COMP5,Flash Patch Comparator Register 5" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x20))&0x01)==0x00) group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x20++0x03 line.long 0x00 "FP_COMP6,Flash Patch Comparator Register 6" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x00) group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" bitfld.long 0x00 30.--31. " REPLACE ,Defines the behaviour when the COMP address is matched" ",Set BKPT on lower halfword,Set BKPT on upper halfword,Set BKPT on both" hexmask.long 0x00 2.--28. 0x04 " COMP ,Comparison Address" bitfld.long 0x00 0. " ENABLE ,Compare and Remap Enable" "Disabled,Enabled" elif (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))))&0x10000000)==0x10000000) if (((per.l(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("FPB",-1))+0x24))&0x01)==0x00) group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" else group.long 0x24++0x03 line.long 0x00 "FP_COMP7,Flash Patch Comparator Register 7" hexmask.long 0x00 1.--31. 0x02 " BPADDR ,Breakpoint address" bitfld.long 0x00 0. " BE ,Enable bit for Breakpoint" "Disabled,Enabled" endif endif width 6. tree "CoreSight Identification Registers" rgroup.long 0xFE0++0x0F line.long 0x00 "PID0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "PID1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "PID2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0c "PID3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "PID4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "CID0,Component ID0 (Preamble)" line.long 0x04 "CID1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble" line.long 0x08 "CID2,Component ID2" line.long 0x0c "CID3,Component ID3" tree.end width 0xB else newline textline "FPB component base address not specified" newline endif tree.end tree "Data Watchpoint and Trace Unit (DWT)" sif COMPonent.AVAILABLE("DWT") base CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1)) width 15. group.long 0x00++0x1B line.long 0x00 "DWT_CTRL,Control Register" rbitfld.long 0x00 28.--31. " NUMCOMP ,Number of comparators implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rbitfld.long 0x00 27. " NOTRCPKT ,Shows whether the implementation supports trace sampling and exception tracing" "Supported,Not supported" rbitfld.long 0x00 26. " NOEXTTRIG ,Shows whether the implementation includes external match signals" "Supported,Not supported" textline " " rbitfld.long 0x00 25. " NOCYCCNT ,Shows whether the implementation supports a cycle counter" "Supported,Not supported" rbitfld.long 0x00 24. " NOPRFCNT ,Shows whether the implementation supports the profiling counters" "Supported,Not supported" bitfld.long 0x00 22. " CYCEVTENA ,Enables POSTCNT underflow Event counter packets generation" "Disabled,Enabled" textline " " bitfld.long 0x00 21. " FOLDEVTENA ,Enables generation of the Folded-instruction counter overflow event" "Disabled,Enabled" bitfld.long 0x00 20. " LSUEVTENA ,Enables generation of the LSU counter overflow event" "Disabled,Enabled" bitfld.long 0x00 19. " SLEEPEVTENA ,Enables generation of the Sleep counter overflow event" "Disabled,Enabled" textline " " bitfld.long 0x00 18. " EXCEVTENA ,Enables generation of the Exception overhead counter overflow event" "Disabled,Enabled" bitfld.long 0x00 17. " CPIEVTENA ,Enables generation of the CPI counter overflow event" "Disabled,Enabled" bitfld.long 0x00 16. " EXCTRCENA ,Enables generation of exception trace" "Disabled,Enabled" textline " " bitfld.long 0x00 12. " PCSAMPLEENA ,Enables use of POSTCNT counter as a timer for Periodic PC sample packet generation" "Disabled,Enabled" bitfld.long 0x00 10.--11. " SYNCTAP ,Selects the position of the synchronization packet counter tap on the CYCCNT counter" "Disabled,CYCCNT[24],CYCCNT[26],CYCCNT[28]" bitfld.long 0x00 9. " CYCTAP ,Selects the position of the POSTCNT tap on the CYCCNT counter" "CYCCNT[6],CYCCNT[10]" textline " " bitfld.long 0x00 5.--8. " POSTINIT ,Initial value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1.--4. " POSTPRESET ,Reload value for the POSTCNT counter" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " CYCCNTENA ,Enables CYCCNT" "Disabled,Enabled" line.long 0x04 "DWT_CYCCNT,Cycle Count Register" line.long 0x08 "DWT_CPICNT,CPI Count Register" hexmask.long.byte 0x08 0.--7. 1. " CPICNT ,The base CPI counter" line.long 0x0c "DWT_EXCCNT,Exception Overhead Count Register" hexmask.long.byte 0x0c 0.--7. 1. " EXCCNT ,The exception overhead counter" line.long 0x10 "DWT_SLEEPCNT,Sleep Count Register" hexmask.long.byte 0x10 0.--7. 1. " SLEEPCNT ,Sleep Counter" line.long 0x14 "DWT_LSUCNT,LSU Count Register" hexmask.long.byte 0x14 0.--7. 1. " LSUCNT ,Load-store counter" line.long 0x18 "DWT_FOLDCNT,Folded-instruction Count Register" hexmask.long.byte 0x18 0.--7. 1. " FOLDCNT ,Folded-instruction counter" rgroup.long 0x1C++0x03 line.long 0x00 "DWT_PCSR,Program Counter Sample register" textline " " group.long 0x20++0x07 line.long 0x00 "DWT_COMP0,DWT Comparator Register 0" line.long 0x04 "DWT_MASK0,DWT Mask Registers 0" bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x20) group.long 0x28++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled" bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x1A0)==0x00) group.long 0x28++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled" bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x28))&0x180)==0x80) group.long 0x28++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled" bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet,UNPREDICTABLE,UNPREDICTABLE,Generate watchpoint debug event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,CMPMATCH[N] event,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" else group.long 0x28++0x03 line.long 0x00 "DWT_FUNCTION0,DWT Function Registers 0" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 7. " CYCMATCH ,Enable cycle count comparison for comparator 0" "Disabled,Enabled" bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" endif group.long (0x30)++0x07 line.long 0x00 "DWT_COMP1,DWT Comparator Register 1" line.long 0x04 "DWT_MASK1,DWT Mask Registers 1" bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x20) group.long (0x30+0x08)++0x03 line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x30+0x08))&0x120)==0x00) group.long (0x30+0x08)++0x03 line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE" else group.long (0x30+0x08)++0x03 line.long 0x00 "DWT_FUNCTION1,DWT Function Registers 1" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" endif group.long (0x40)++0x07 line.long 0x00 "DWT_COMP2,DWT Comparator Register 2" line.long 0x04 "DWT_MASK2,DWT Mask Registers 2" bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x20) group.long (0x40+0x08)++0x03 line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x40+0x08))&0x120)==0x00) group.long (0x40+0x08)++0x03 line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE" else group.long (0x40+0x08)++0x03 line.long 0x00 "DWT_FUNCTION2,DWT Function Registers 2" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" endif group.long (0x50)++0x07 line.long 0x00 "DWT_COMP3,DWT Comparator Register 3" line.long 0x04 "DWT_MASK3,DWT Mask Registers 3" bitfld.long 0x04 0.--4. " MASK ,The size of the ignore mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" if (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x20) group.long (0x50+0x08)++0x03 line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send address trace packet on READ/WRITE,Send data value + address packet on READ/WRITE,Send data value + address packet on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data address trace packet on READ,Send data address trace packet on WRITE,Send data address + PC value on READ,Send data address + PC value on WRITE" elif (((per.long(CONvert.ADDRESSTODUALPORT(COMPonent.BASE("DWT",-1))+0x50+0x08))&0x120)==0x00) group.long (0x50+0x08)++0x03 line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,Send PC value trace packet on READ/WRITE,Send data value trace packet on READ/WRITE,Send data value + PC value on READ/WRITE,Watchpoint debug event on PC match,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,CMPMATCH[N] event on PC match,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ/WRITE,Send data value trace packet on READ,Send data value trace packet on WRITE,Send data value + PC value on READ,Send data value + PC value on WRITE" else group.long (0x50+0x08)++0x03 line.long 0x00 "DWT_FUNCTION3,DWT Function Registers 3" bitfld.long 0x00 24. " MATCHED ,Comparator match" "No matched,Matched" bitfld.long 0x00 16.--19. " DATAVADDR1 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " DATAVADDR0 ,Data Value Comparator ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 10.--11. " DATAVSIZE ,Data Value Size" "8-bit,16-bit,32-bit,Reserved" bitfld.long 0x00 9. " LNK1ENA ,Supports use of a second linked comparator" "Not Supported,Supported" bitfld.long 0x00 8. " DATAVMATCH ,Data value compare" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " EMITRANGE ,Enables generation of Data trace address offset packets" "Disabled,Enabled" bitfld.long 0x00 0.--3. " FUNCTION ,Selects action taken on comparator match" "Disabled,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,Watchpoint debug event on READ,Watchpoint debug event on WRITE,Watchpoint debug event on READ/WRITE,UNPREDICTABLE,CMPMATCH[N] event on READ,CMPMATCH[N] event on WRITE,CMPMATCH[N] event on READ,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE,UNPREDICTABLE" endif width 6. tree "CoreSight Identification Registers" rgroup.long 0xFE0++0x0F line.long 0x00 "PID0,Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " Part_Num[7:0] ,Part Number bits[7:0]" line.long 0x04 "PID1,Peripheral ID1" hexmask.long.byte 0x04 4.--7. 1. " JEP106ID[3:0] ,JEP106 ID code bits[3:0]" hexmask.long.byte 0x04 0.--3. 1. " Part_Num[11:8] ,Part Number bits[11:8]" line.long 0x08 "PID2,Peripheral ID2" hexmask.long.byte 0x08 4.--7. 1. " Revision ,Revision" bitfld.long 0x08 3. " JEDEC ,JEDEC assigned ID fields" "0,JEDEC" hexmask.long.byte 0x08 0.--2. 1. " JEP106ID[6:4] ,JEP106 ID code bits[6:4]" line.long 0x0c "PID3,Peripheral ID3" hexmask.long.byte 0x0C 4.--7. 1. " RevAnd ,Minor revision field" hexmask.long.byte 0x0C 0.--3. 1. " CMB ,Customer-modified block" rgroup.long 0xFD0++0x03 line.long 0x00 "PID4,Peripheral Identification Register 4" hexmask.long.byte 0x00 4.--7. 1. " Count ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CC ,JEP106 continuation code" rgroup.long 0xFF0++0x0F line.long 0x00 "CID0,Component ID0 (Preamble)" line.long 0x04 "CID1,Component ID1" hexmask.long.byte 0x04 4.--7. 1. " CC ,Component Class" hexmask.long.byte 0x04 0.--3. 1. " Preamble ,Preamble" line.long 0x08 "CID2,Component ID2" line.long 0x0c "CID3,Component ID3" tree.end width 0x0B else newline textline "DWT component base address not specified" newline endif tree.end tree.end AUTOINDENT.POP tree.end autoindent.on center tree tree "ACMP (ACMP0)" repeat 3. (list 0. 1. 2.) (list ad:0x40080000 ad:0x40080400 ad:0x40080800) tree "ACMP$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 31. "FULLBIAS,Full Bias Current" "0,1" bitfld.long 0x00 24.--29. "BIASPROG,Bias Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 21. "IFALL,Falling Edge Interrupt Sense" "0,1" bitfld.long 0x00 20. "IRISE,Rising Edge Interrupt Sense" "0,1" newline bitfld.long 0x00 18.--19. "INPUTRANGE,Input Range" "0: Setting when the input can be from 0 to ACMPVDD,1: Setting when the input will always be greater..,2: Setting when the input will always be less..,?..." bitfld.long 0x00 15. "ACCURACY,ACMP Accuracy Mode" "0,1" newline bitfld.long 0x00 12.--14. "PWRSEL,Power Select" "0: AVDD supply,1: DVDD supply,2: IOVDD/IOVDD0 supply,?,4: IOVDD1 supply (if part has two I/O voltages),?..." bitfld.long 0x00 10. "APORTVMASTERDIS,APORT Bus Master Disable for Bus Selected By VASEL" "0,1" newline bitfld.long 0x00 9. "APORTYMASTERDIS,APORT Bus Y Master Disable" "0,1" bitfld.long 0x00 8. "APORTXMASTERDIS,APORT Bus X Master Disable" "0,1" newline bitfld.long 0x00 3. "GPIOINV,Comparator GPIO Output Invert" "0,1" bitfld.long 0x00 2. "INACTVAL,Inactive Value" "0,1" newline bitfld.long 0x00 0. "EN,Analog Comparator Enable" "0,1" group.long 0x04++0x03 line.long 0x00 "INPUTSEL,Input Selection Register" bitfld.long 0x00 28.--30. "CSRESSEL,Capacitive Sense Mode Internal Resistor Select" "0: Internal capacitive sense resistor value 0,1: Internal capacitive sense resistor value 1,2: Internal capacitive sense resistor value 2,3: Internal capacitive sense resistor value 3,4: Internal capacitive sense resistor value 4,5: Internal capacitive sense resistor value 5,6: Internal capacitive sense resistor value 6,7: Internal capacitive sense resistor value 7" bitfld.long 0x00 26. "CSRESEN,Capacitive Sense Mode Internal Resistor Enable" "0,1" newline bitfld.long 0x00 24. "VLPSEL,Low-Power Sampled Voltage Selection" "0,1" bitfld.long 0x00 22. "VBSEL,VB Selection" "0,1" newline bitfld.long 0x00 16.--21. "VASEL,VA Selection" "0: ACMPVDD,1: APORT2Y Channel 0,?,3: APORT2Y Channel 2,?,5: APORT2Y Channel 4,?,7: APORT2Y Channel 6,?,9: APORT2Y Channel 8,?,11: APORT2Y Channel 10,?,13: APORT2Y Channel 12,?,15: APORT2Y Channel 14,?,17: APORT2Y Channel 16,?,19: APORT2Y Channel 18,?,21: APORT2Y Channel 20,?,23: APORT2Y Channel 22,?,25: APORT2Y Channel 24,?,27: APORT2Y Channel 26,?,29: APORT2Y Channel 28,?,31: APORT2Y Channel 30,32: APORT1X Channel 0,33: APORT1Y Channel 1,34: APORT1X Channel 2,35: APORT1Y Channel 3,36: APORT1X Channel 4,37: APORT1Y Channel 5,38: APORT1X Channel 6,39: APORT1Y Channel 7,40: APORT1X Channel 8,41: APORT1Y Channel 9,42: APORT1X Channel 10,43: APORT1Y Channel 11,44: APORT1X Channel 12,45: APORT1Y Channel 13,46: APORT1X Channel 14,47: APORT1Y Channel 15,48: APORT1X Channel 16,49: APORT1Y Channel 17,50: APORT1X Channel 18,51: APORT1Y Channel 19,52: APORT1X Channel 20,53: APORT1Y Channel 21,54: APORT1X Channel 22,55: APORT1Y Channel 23,56: APORT1X Channel 24,57: APORT1Y Channel 25,58: APORT1X Channel 26,59: APORT1Y Channel 27,60: APORT1X Channel 28,61: APORT1Y Channel 29,62: APORT1X Channel 30,63: APORT1Y Channel 31" hexmask.long.byte 0x00 8.--15. 1. "NEGSEL,Negative Input Select" newline hexmask.long.byte 0x00 0.--7. 1. "POSSEL,Positive Input Select" rgroup.long 0x08++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 3. "EXTIFACT,External Override Interface Active" "0,1" bitfld.long 0x00 2. "APORTCONFLICT,APORT Conflict Output" "0,1" newline bitfld.long 0x00 1. "ACMPOUT,Analog Comparator Output" "0,1" bitfld.long 0x00 0. "ACMPACT,Analog Comparator Active" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 2. "APORTCONFLICT,APORT Conflict Interrupt Flag" "0,1" bitfld.long 0x00 1. "WARMUP,Warm-up Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "EDGE,Edge Triggered Interrupt Flag" "0,1" wgroup.long 0x10++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 2. "APORTCONFLICT,Set APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 1. "WARMUP,Set WARMUP Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "EDGE,Set EDGE Interrupt Flag" "0,1" wgroup.long 0x14++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 2. "APORTCONFLICT,Clear APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 1. "WARMUP,Clear WARMUP Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "EDGE,Clear EDGE Interrupt Flag" "0,1" group.long 0x18++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 2. "APORTCONFLICT,APORTCONFLICT Interrupt Enable" "0,1" bitfld.long 0x00 1. "WARMUP,WARMUP Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "EDGE,EDGE Interrupt Enable" "0,1" rgroup.long 0x20++0x03 line.long 0x00 "APORTREQ,APORT Request Status Register" bitfld.long 0x00 9. "APORT4YREQ,1 If the Bus Connected to APORT4Y is Requested" "0,1" bitfld.long 0x00 8. "APORT4XREQ,1 If the Bus Connected to APORT4X is Requested" "0,1" newline bitfld.long 0x00 7. "APORT3YREQ,1 If the Bus Connected to APORT3Y is Requested" "0,1" bitfld.long 0x00 6. "APORT3XREQ,1 If the Bus Connected to APORT3X is Requested" "0,1" newline bitfld.long 0x00 5. "APORT2YREQ,1 If the Bus Connected to APORT2Y is Requested" "0,1" bitfld.long 0x00 4. "APORT2XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" newline bitfld.long 0x00 3. "APORT1YREQ,1 If the Bus Connected to APORT1X is Requested" "0,1" bitfld.long 0x00 2. "APORT1XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" newline bitfld.long 0x00 1. "APORT0YREQ,1 If the Bus Connected to APORT0Y is Requested" "0,1" bitfld.long 0x00 0. "APORT0XREQ,1 If the Bus Connected to APORT0X is Requested" "0,1" rgroup.long 0x24++0x03 line.long 0x00 "APORTCONFLICT,APORT Conflict Status Register" bitfld.long 0x00 9. "APORT4YCONFLICT,1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 8. "APORT4XCONFLICT,1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 7. "APORT3YCONFLICT,1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 6. "APORT3XCONFLICT,1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 5. "APORT2YCONFLICT,1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 4. "APORT2XCONFLICT,1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 3. "APORT1YCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 2. "APORT1XCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 1. "APORT0YCONFLICT,1 If the Bus Connected to APORT0Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 0. "APORT0XCONFLICT,1 If the Bus Connected to APORT0X is in Conflict With Another Peripheral" "0,1" group.long 0x28++0x03 line.long 0x00 "HYSTERESIS0,Hysteresis 0 Register" bitfld.long 0x00 24.--29. "DIVVB,Divider for VB Voltage When ACMPOUT=0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--21. "DIVVA,Divider for VA Voltage When ACMPOUT=0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--3. "HYST,Hysteresis Select When ACMPOUT=0" "0: No hysteresis,1: 14 mV hysteresis,2: 25 mV hysteresis,3: 30 mV hysteresis,4: 35 mV hysteresis,5: 39 mV hysteresis,6: 42 mV hysteresis,7: 45 mV hysteresis,8: No hysteresis,9: -14 mV hysteresis,10: -25 mV hysteresis,11: -30 mV hysteresis,12: -35 mV hysteresis,13: -39 mV hysteresis,14: -42 mV hysteresis,15: -45 mV hysteresis" group.long 0x2C++0x03 line.long 0x00 "HYSTERESIS1,Hysteresis 1 Register" bitfld.long 0x00 24.--29. "DIVVB,Divider for VB Voltage When ACMPOUT=1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--21. "DIVVA,Divider for VA Voltage When ACMPOUT=1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--3. "HYST,Hysteresis Select When ACMPOUT=1" "0: No hysteresis,1: 14 mV hysteresis,2: 25 mV hysteresis,3: 30 mV hysteresis,4: 35 mV hysteresis,5: 39 mV hysteresis,6: 42 mV hysteresis,7: 45 mV hysteresis,8: No hysteresis,9: -14 mV hysteresis,10: -25 mV hysteresis,11: -30 mV hysteresis,12: -35 mV hysteresis,13: -39 mV hysteresis,14: -42 mV hysteresis,15: -45 mV hysteresis" group.long 0x40++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pine Enable Register" bitfld.long 0x00 0. "OUTPEN,ACMP Output Pin Enable" "0,1" group.long 0x44++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 0.--5. "OUTLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." group.long 0x48++0x03 line.long 0x00 "EXTIFCTRL,External Override Interface Control" bitfld.long 0x00 4.--7. "APORTSEL,APORT Selection for External Interface" "0: APORT0X used,1: APORT0Y used,2: APORT1X used,3: APORT1Y used,4: APORT1X/Y used,5: APORT2X used,6: APORT2Y used,7: APORT2Y/X used,8: APORT3X used,9: APORT3Y used,10: APORT3X/Y used,11: APORT4X used,12: APORT4Y used,13: APORT4Y/X used,?..." bitfld.long 0x00 0. "EN,Enable External Interface" "0,1" tree.end repeat.end tree.end tree "ADC (ADC0)" repeat 2. (list 0. 1.) (list ad:0x40082000 ad:0x40082400) tree "ADC$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 30.--31. "CHCONREFWARMIDLE,Channel Connect and Reference Warm Sel When ADC is IDLE" "0: Keep scan reference warm and APORT switches..,1: Keep single reference warm and keep APORT..,2: Keep last used reference warm and keep APORT..,?..." bitfld.long 0x00 29. "CHCONMODE,Channel Connect" "0,1" newline bitfld.long 0x00 28. "DBGHALT,Debug Mode Halt Enable" "0,1" bitfld.long 0x00 24.--27. "OVSRSEL,Oversample Rate Select" "0: 2 samples for each conversion result,1: 4 samples for each conversion result,2: 8 samples for each conversion result,3: 16 samples for each conversion result,4: 32 samples for each conversion result,5: 64 samples for each conversion result,6: 128 samples for each conversion result,7: 256 samples for each conversion result,8: 512 samples for each conversion result,9: 1024 samples for each conversion result,10: 2048 samples for each conversion result,11: 4096 samples for each conversion result,?..." newline hexmask.long.byte 0x00 16.--22. 1. "TIMEBASE,1us Time Base" hexmask.long.byte 0x00 8.--14. 1. "PRESC,Prescalar Setting for ADC Sample and Conversion Clock" newline bitfld.long 0x00 7. "ADCCLKMODE,ADC Clock Mode" "0,1" bitfld.long 0x00 6. "ASYNCCLKEN,Selects ASYNC CLK Enable Mode When ADCCLKMODE=1" "0,1" newline bitfld.long 0x00 4. "TAILGATE,Conversion Tailgating" "0,1" bitfld.long 0x00 3. "SCANDMAWU,SCANFIFO DMA Wakeup" "0,1" newline bitfld.long 0x00 2. "SINGLEDMAWU,SINGLEFIFO DMA Wakeup" "0,1" bitfld.long 0x00 0.--1. "WARMUPMODE,Warm-up Mode" "0: ADC is shut down after each conversion,1: ADC is kept in standby mode between conversions,2: ADC is kept in slow acquisition mode between..,3: ADC is kept on after conversions allowing for.." wgroup.long 0x08++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 3. "SCANSTOP,Scan Sequence Stop" "0,1" bitfld.long 0x00 2. "SCANSTART,Scan Sequence Start" "0,1" newline bitfld.long 0x00 1. "SINGLESTOP,Single Channel Conversion Stop" "0,1" bitfld.long 0x00 0. "SINGLESTART,Single Channel Conversion Start" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 17. "SCANDV,Scan Data Valid" "0,1" bitfld.long 0x00 16. "SINGLEDV,Single Channel Data Valid" "0,1" newline bitfld.long 0x00 12. "WARM,ADC Warmed Up" "0,1" bitfld.long 0x00 10.--11. "PROGERR,Programming Error Status" "?,1: UNKN_DESC,2: NEGSELCONF,?..." newline bitfld.long 0x00 9. "SCANREFWARM,Scan Reference Warmed Up" "0,1" bitfld.long 0x00 8. "SINGLEREFWARM,Single Channel Reference Warmed Up" "0,1" newline bitfld.long 0x00 2. "SCANPENDING,Scan Conversion Pending" "0,1" bitfld.long 0x00 1. "SCANACT,Scan Conversion Active" "0,1" newline bitfld.long 0x00 0. "SINGLEACT,Single Channel Conversion Active" "0,1" group.long 0x10++0x03 line.long 0x00 "SINGLECTRL,Single Channel Control Register" bitfld.long 0x00 31. "CMPEN,Compare Logic Enable for Single Channel" "0,1" bitfld.long 0x00 29. "PRSEN,Single Channel PRS Trigger Enable" "0,1" newline bitfld.long 0x00 24.--27. "AT,Single Channel Acquisition Time" "0: 1 conversion clock cycle acquisition time for..,1: 2 conversion clock cycles acquisition time..,2: 3 conversion clock cycles acquisition time..,3: 4 conversion clock cycles acquisition time..,4: 8 conversion clock cycles acquisition time..,5: 16 conversion clock cycles acquisition time..,6: 32 conversion clock cycles acquisition time..,7: 64 conversion clock cycles acquisition time..,8: 128 conversion clock cycles acquisition time..,9: 256 conversion clock cycles acquisition time..,?..." hexmask.long.byte 0x00 16.--23. 1. "NEGSEL,Single Channel Negative Input Selection" newline hexmask.long.byte 0x00 8.--15. 1. "POSSEL,Single Channel Positive Input Selection" bitfld.long 0x00 5.--7. "REF,Single Channel Reference Selection" "0: VFS = 1.25V with internal VBGR reference,1: VFS = 2.5V with internal VBGR reference,2: VFS = AVDD with AVDD as reference source,3: VFS = 5V with internal VBGR reference,4: Single ended external reference,5: Differential external reference 2x,6: VFS = 2xAVDD with AVDD as the reference source,7: Use SINGLECTRLX to configure reference" newline bitfld.long 0x00 3.--4. "RES,Single Channel Resolution Select" "0: 12-bit resolution,1: 8-bit resolution,2: 6-bit resolution,3: Oversampling enabled" bitfld.long 0x00 2. "ADJ,Single Channel Result Adjustment" "0,1" newline bitfld.long 0x00 1. "DIFF,Single Channel Differential Mode" "0,1" bitfld.long 0x00 0. "REP,Single Channel Repetitive Mode" "0,1" group.long 0x14++0x03 line.long 0x00 "SINGLECTRLX,Single Channel Control Register Continued" bitfld.long 0x00 29.--31. "REPDELAY,REPDELAY Select for SINGLE REP Mode" "0: No delay,1: 4 conversion clock cycles,2: 8 conversion clock cycles,3: 16 conversion clock cycles,4: 32 conversion clock cycles,5: 64 conversion clock cycles,6: 128 conversion clock cycles,7: 256 conversion clock cycles" bitfld.long 0x00 27. "CONVSTARTDELAYEN,Enable Delaying Next Conversion Start" "0,1" newline bitfld.long 0x00 22.--26. "CONVSTARTDELAY,Delay Value for Next Conversion Start If CONVSTARTDELAYEN is Set" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 17.--20. "PRSSEL,Single Channel PRS Trigger Select" "0: PRS ch 0 triggers single channel,1: PRS ch 1 triggers single channel,2: PRS ch 2 triggers single channel,3: PRS ch 3 triggers single channel,4: PRS ch 4 triggers single channel,5: PRS ch 5 triggers single channel,6: PRS ch 6 triggers single channel,7: PRS ch 7 triggers single channel,8: PRS ch 8 triggers single channel,9: PRS ch 9 triggers single channel,10: PRS ch 10 triggers single channel,11: PRS ch 11 triggers single channel,12: PRS ch 12 triggers single channel,13: PRS ch 13 triggers single channel,14: PRS ch 14 triggers single channel,15: PRS ch 15 triggers single channel" newline bitfld.long 0x00 16. "PRSMODE,Single Channel PRS Trigger Mode" "0,1" bitfld.long 0x00 14. "FIFOOFACT,Single Channel FIFO Overflow Action" "0,1" newline bitfld.long 0x00 12.--13. "DVL,Single Channel DV Level Select" "0,1,2,3" bitfld.long 0x00 8.--11. "VINATT,Code for VIN Attenuation Factor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "VREFATT,Code for VREF Attenuation Factor When VREFSEL is 1 2 or 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. "VREFATTFIX,Enable Fixed Scaling on VREF" "0,1" newline bitfld.long 0x00 0.--2. "VREFSEL,Single Channel Reference Selection" "0: Internal 0.83V Bandgap reference,1: Scaled AVDD,2: Scaled singled ended external Vref,3: Raw single ended external Vref,4: Special mode used to generate ENTROPY,5: Scaled differential external Vref from,6: Raw differential external Vref from,7: Internal Bandgap reference at low setting 0.78V" group.long 0x18++0x03 line.long 0x00 "SCANCTRL,Scan Control Register" bitfld.long 0x00 31. "CMPEN,Compare Logic Enable for Scan" "0,1" bitfld.long 0x00 29. "PRSEN,Scan Sequence PRS Trigger Enable" "0,1" newline bitfld.long 0x00 24.--27. "AT,Scan Acquisition Time" "0: 1 conversion clock cycle acquisition time for..,1: 2 conversion clock cycles acquisition time..,2: 3 conversion clock cycles acquisition time..,3: 4 conversion clock cycles acquisition time..,4: 8 conversion clock cycles acquisition time..,5: 16 conversion clock cycles acquisition time..,6: 32 conversion clock cycles acquisition time..,7: 64 conversion clock cycles acquisition time..,8: 128 conversion clock cycles acquisition time..,9: 256 conversion clock cycles acquisition time..,?..." bitfld.long 0x00 5.--7. "REF,Scan Sequence Reference Selection" "0: VFS = 1.25V with internal VBGR reference,1: VFS = 2.5V with internal VBGR reference,2: VFS = AVDD with AVDD as reference source,3: VFS = 5V with internal VBGR reference,4: Single ended external reference,5: Differential external reference 2x,6: VFS=2xAVDD with AVDD as the reference source,7: Use SCANCTRLX to configure reference" newline bitfld.long 0x00 3.--4. "RES,Scan Sequence Resolution Select" "0: 12-bit resolution,1: 8-bit resolution,2: 6-bit resolution,3: Oversampling enabled" bitfld.long 0x00 2. "ADJ,Scan Sequence Result Adjustment" "0,1" newline bitfld.long 0x00 1. "DIFF,Scan Sequence Differential Mode" "0,1" bitfld.long 0x00 0. "REP,Scan Sequence Repetitive Mode" "0,1" group.long 0x1C++0x03 line.long 0x00 "SCANCTRLX,Scan Control Register Continued" bitfld.long 0x00 29.--31. "REPDELAY,REPDELAY Select for SCAN REP Mode" "0: No delay,1: 4 conversion clock cycles,2: 8 conversion clock cycles,3: 16 conversion clock cycles,4: 32 conversion clock cycles,5: 64 conversion clock cycles,6: 128 conversion clock cycles,7: 256 conversion clock cycles" bitfld.long 0x00 27. "CONVSTARTDELAYEN,Enable Delaying Next Conversion Start" "0,1" newline bitfld.long 0x00 22.--26. "CONVSTARTDELAY,Delay Next Conversion Start If CONVSTARTDELAYEN is Set" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 17.--20. "PRSSEL,Scan Sequence PRS Trigger Select" "0: PRS ch 0 triggers scan sequence,1: PRS ch 1 triggers scan sequence,2: PRS ch 2 triggers scan sequence,3: PRS ch 3 triggers scan sequence,4: PRS ch 4 triggers scan sequence,5: PRS ch 5 triggers scan sequence,6: PRS ch 6 triggers scan sequence,7: PRS ch 7 triggers scan sequence,8: PRS ch 8 triggers scan sequence,9: PRS ch 9 triggers scan sequence,10: PRS ch 10 triggers scan sequence,11: PRS ch 11 triggers scan sequence,12: PRS ch 12 triggers scan sequence,13: PRS ch 13 triggers scan sequence,14: PRS ch 14 triggers scan sequence,15: PRS ch 15 triggers scan sequence" newline bitfld.long 0x00 16. "PRSMODE,Scan PRS Trigger Mode" "0,1" bitfld.long 0x00 14. "FIFOOFACT,Scan FIFO Overflow Action" "0,1" newline bitfld.long 0x00 12.--13. "DVL,Scan DV Level Select" "0,1,2,3" bitfld.long 0x00 8.--11. "VINATT,Code for VIN Attenuation Factor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. "VREFATT,Code for VREF Attenuation Factor When VREFSEL is 1 2 or 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. "VREFATTFIX,Enable Fixed Scaling on VREF" "0,1" newline bitfld.long 0x00 0.--2. "VREFSEL,Scan Channel Reference Selection" "0: Internal 0.83V Bandgap reference,1: Scaled AVDD,2: Scaled singled ended external Vref,3: Raw single ended external Vref,?,5: Scaled differential external Vref from,6: Raw differential external Vref from,7: Internal Bandgap reference at low setting 0.78V" group.long 0x20++0x03 line.long 0x00 "SCANMASK,Scan Sequence Input Mask Register" hexmask.long 0x00 0.--31. 1. "SCANINPUTEN,Scan Sequence Input Mask" group.long 0x24++0x03 line.long 0x00 "SCANINPUTSEL,Input Selection Register for Scan Mode" bitfld.long 0x00 24.--28. "INPUT24TO31SEL,Inputs Chosen for ADCn_INPUT24-ADCn_INPUT31 as Referred in SCANMASK" "0: APORT0CH0TO7,1: APORT0CH8TO15,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,8: APORT2CH0TO7,9: APORT2CH8TO15,10: APORT2CH16TO23,11: APORT2CH24TO31,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31,16: APORT4CH0TO7,17: APORT4CH8TO15,18: APORT4CH16TO23,19: APORT4CH24TO31,?..." bitfld.long 0x00 16.--20. "INPUT16TO23SEL,Inputs Chosen for ADCn_INPUT16-ADCn_INPUT23 as Referred in SCANMASK" "0: APORT0CH0TO7,1: APORT0CH8TO15,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,8: APORT2CH0TO7,9: APORT2CH8TO15,10: APORT2CH16TO23,11: APORT2CH24TO31,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31,16: APORT4CH0TO7,17: APORT4CH8TO15,18: APORT4CH16TO23,19: APORT4CH24TO31,?..." newline bitfld.long 0x00 8.--12. "INPUT8TO15SEL,Inputs Chosen for ADCn_INPUT8-ADCn_INPUT15 as Referred in SCANMASK" "0: APORT0CH0TO7,1: APORT0CH8TO15,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,8: APORT2CH0TO7,9: APORT2CH8TO15,10: APORT2CH16TO23,11: APORT2CH24TO31,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31,16: APORT4CH0TO7,17: APORT4CH8TO15,18: APORT4CH16TO23,19: APORT4CH24TO31,?..." bitfld.long 0x00 0.--4. "INPUT0TO7SEL,Inputs Chosen for ADCn_INPUT7-ADCn_INPUT0 as Referred in SCANMASK" "0: APORT0CH0TO7,1: APORT0CH8TO15,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,8: APORT2CH0TO7,9: APORT2CH8TO15,10: APORT2CH16TO23,11: APORT2CH24TO31,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31,16: APORT4CH0TO7,17: APORT4CH8TO15,18: APORT4CH16TO23,19: APORT4CH24TO31,?..." group.long 0x28++0x03 line.long 0x00 "SCANNEGSEL,Negative Input Select Register for Scan" bitfld.long 0x00 14.--15. "INPUT15NEGSEL,Negative Input Select Register for ADCn_INPUT15 in Differential Scan Mode" "0: Selects ADCn_INPUT8 as negative channel input,1: Selects ADCn_INPUT10 as negative channel input,2: Selects ADCn_INPUT12 as negative channel input,3: Selects ADCn_INPUT14 as negative channel input" bitfld.long 0x00 12.--13. "INPUT13NEGSEL,Negative Input Select Register for ADCn_INPUT13 in Differential Scan Mode" "0: Selects ADCn_INPUT8 as negative channel input,1: Selects ADCn_INPUT10 as negative channel input,2: Selects ADCn_INPUT12 as negative channel input,3: Selects ADCn_INPUT14 as negative channel input" newline bitfld.long 0x00 10.--11. "INPUT11NEGSEL,Negative Input Select Register for ADCn_INPUT11 in Differential Scan Mode" "0: Selects ADCn_INPUT8 as negative channel input,1: Selects ADCn_INPUT10 as negative channel input,2: Selects ADCn_INPUT12 as negative channel input,3: Selects ADCn_INPUT14 as negative channel input" bitfld.long 0x00 8.--9. "INPUT9NEGSEL,Negative Input Select Register for ADCn_INPUT9 in Differential Scan Mode" "0: Selects ADCn_INPUT8 as negative channel input,1: Selects ADCn_INPUT10 as negative channel input,2: Selects ADCn_INPUT12 as negative channel input,3: Selects ADCn_INPUT14 as negative channel input" newline bitfld.long 0x00 6.--7. "INPUT6NEGSEL,Negative Input Select Register for ADCn_INPUT1 in Differential Scan Mode" "0: Selects ADCn_INPUT1 as negative channel input,1: Selects ADCn_INPUT3 as negative channel input,2: Selects ADCn_INPUT5 as negative channel input,3: Selects ADCn_INPUT7 as negative channel input" bitfld.long 0x00 4.--5. "INPUT4NEGSEL,Negative Input Select Register for ADCn_INPUT4 in Differential Scan Mode" "0: Selects ADCn_INPUT1 as negative channel input,1: Selects ADCn_INPUT3 as negative channel input,2: Selects ADCn_INPUT5 as negative channel input,3: Selects ADCn_INPUT7 as negative channel input" newline bitfld.long 0x00 2.--3. "INPUT2NEGSEL,Negative Input Select Register for ADCn_INPUT2 in Differential Scan Mode" "0: Selects ADCn_INPUT1 as negative channel input,1: Selects ADCn_INPUT3 as negative channel input,2: Selects ADCn_INPUT5 as negative channel input,3: Selects ADCn_INPUT7 as negative channel input" bitfld.long 0x00 0.--1. "INPUT0NEGSEL,Negative Input Select Register for ADCn_INPUT0 in Differential Scan Mode" "0: Selects ADCn_INPUT1 as negative channel input,1: Selects ADCn_INPUT3 as negative channel input,2: Selects ADCn_INPUT5 as negative channel input,3: Selects ADCn_INPUT7 as negative channel input" group.long 0x2C++0x03 line.long 0x00 "CMPTHR,Compare Threshold Register" hexmask.long.word 0x00 16.--31. 1. "ADGT,Greater Than Compare Threshold" hexmask.long.word 0x00 0.--15. 1. "ADLT,Less Than Compare Threshold" group.long 0x30++0x03 line.long 0x00 "BIASPROG,Bias Programming Register for Various Analog Blocks Used in ADC Operation" bitfld.long 0x00 16. "GPBIASACC,Accuracy Setting for the System Bias During ADC Operation" "0,1" bitfld.long 0x00 12. "VFAULTCLR,Clear VREFOF Flag" "0,1" newline bitfld.long 0x00 0.--3. "ADCBIASPROG,Bias Programming Value of Analog ADC Block" "0: Normal power (use for 1Msps operation),?,?,?,4: Scaling bias to 1/2,?,?,?,8: Scaling bias to 1/4,?,?,?,12: Scaling bias to 1/8,?,14: Scaling bias to 1/16,15: Scaling bias to 1/32" group.long 0x34++0x03 line.long 0x00 "CAL,Calibration Register" bitfld.long 0x00 31. "CALEN,Calibration Mode is Enabled" "0,1" hexmask.long.byte 0x00 24.--30. 1. "SCANGAIN,Scan Mode Gain Calibration Value" newline bitfld.long 0x00 20.--23. "SCANOFFSETINV,Scan Mode Offset Calibration Value for Negative Single-ended Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "SCANOFFSET,Scan Mode Offset Calibration Value for Differential or Positive Single-ended Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 15. "OFFSETINVMODE,Negative Single-ended Offset Calibration is Enabled" "0,1" hexmask.long.byte 0x00 8.--14. 1. "SINGLEGAIN,Single Mode Gain Calibration Value" newline bitfld.long 0x00 4.--7. "SINGLEOFFSETINV,Single Mode Offset Calibration Value for Negative Single-ended Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "SINGLEOFFSET,Single Mode Offset Calibration Value for Differential or Positive Single-ended Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x38++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 29. "EM23ERR,EM23 Entry Error Flag" "0,1" bitfld.long 0x00 28. "PRSTIMEDERR,PRS Timed Mode Error Flag" "0,1" newline bitfld.long 0x00 27. "SCANPEND,Scan Trigger Pending Flag" "0,1" bitfld.long 0x00 26. "SCANEXTPEND,External Scan Trigger Pending Flag" "0,1" newline bitfld.long 0x00 25. "PROGERR,Programming Error Interrupt Flag" "0,1" bitfld.long 0x00 24. "VREFOV,VREF Over Voltage Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "SCANCMP,Scan Result Compare Match Interrupt Flag" "0,1" bitfld.long 0x00 16. "SINGLECMP,Single Result Compare Match Interrupt Flag" "0,1" newline bitfld.long 0x00 11. "SCANUF,Scan FIFO Underflow Interrupt Flag" "0,1" bitfld.long 0x00 10. "SINGLEUF,Single FIFO Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "SCANOF,Scan FIFO Overflow Interrupt Flag" "0,1" bitfld.long 0x00 8. "SINGLEOF,Single FIFO Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "SCAN,Scan Conversion Complete Interrupt Flag" "0,1" bitfld.long 0x00 0. "SINGLE,Single Conversion Complete Interrupt Flag" "0,1" wgroup.long 0x3C++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 29. "EM23ERR,Set EM23ERR Interrupt Flag" "0,1" bitfld.long 0x00 28. "PRSTIMEDERR,Set PRSTIMEDERR Interrupt Flag" "0,1" newline bitfld.long 0x00 27. "SCANPEND,Set SCANPEND Interrupt Flag" "0,1" bitfld.long 0x00 26. "SCANEXTPEND,Set SCANEXTPEND Interrupt Flag" "0,1" newline bitfld.long 0x00 25. "PROGERR,Set PROGERR Interrupt Flag" "0,1" bitfld.long 0x00 24. "VREFOV,Set VREFOV Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "SCANCMP,Set SCANCMP Interrupt Flag" "0,1" bitfld.long 0x00 16. "SINGLECMP,Set SINGLECMP Interrupt Flag" "0,1" newline bitfld.long 0x00 11. "SCANUF,Set SCANUF Interrupt Flag" "0,1" bitfld.long 0x00 10. "SINGLEUF,Set SINGLEUF Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "SCANOF,Set SCANOF Interrupt Flag" "0,1" bitfld.long 0x00 8. "SINGLEOF,Set SINGLEOF Interrupt Flag" "0,1" wgroup.long 0x40++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 29. "EM23ERR,Clear EM23ERR Interrupt Flag" "0,1" bitfld.long 0x00 28. "PRSTIMEDERR,Clear PRSTIMEDERR Interrupt Flag" "0,1" newline bitfld.long 0x00 27. "SCANPEND,Clear SCANPEND Interrupt Flag" "0,1" bitfld.long 0x00 26. "SCANEXTPEND,Clear SCANEXTPEND Interrupt Flag" "0,1" newline bitfld.long 0x00 25. "PROGERR,Clear PROGERR Interrupt Flag" "0,1" bitfld.long 0x00 24. "VREFOV,Clear VREFOV Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "SCANCMP,Clear SCANCMP Interrupt Flag" "0,1" bitfld.long 0x00 16. "SINGLECMP,Clear SINGLECMP Interrupt Flag" "0,1" newline bitfld.long 0x00 11. "SCANUF,Clear SCANUF Interrupt Flag" "0,1" bitfld.long 0x00 10. "SINGLEUF,Clear SINGLEUF Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "SCANOF,Clear SCANOF Interrupt Flag" "0,1" bitfld.long 0x00 8. "SINGLEOF,Clear SINGLEOF Interrupt Flag" "0,1" group.long 0x44++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 29. "EM23ERR,EM23ERR Interrupt Enable" "0,1" bitfld.long 0x00 28. "PRSTIMEDERR,PRSTIMEDERR Interrupt Enable" "0,1" newline bitfld.long 0x00 27. "SCANPEND,SCANPEND Interrupt Enable" "0,1" bitfld.long 0x00 26. "SCANEXTPEND,SCANEXTPEND Interrupt Enable" "0,1" newline bitfld.long 0x00 25. "PROGERR,PROGERR Interrupt Enable" "0,1" bitfld.long 0x00 24. "VREFOV,VREFOV Interrupt Enable" "0,1" newline bitfld.long 0x00 17. "SCANCMP,SCANCMP Interrupt Enable" "0,1" bitfld.long 0x00 16. "SINGLECMP,SINGLECMP Interrupt Enable" "0,1" newline bitfld.long 0x00 11. "SCANUF,SCANUF Interrupt Enable" "0,1" bitfld.long 0x00 10. "SINGLEUF,SINGLEUF Interrupt Enable" "0,1" newline bitfld.long 0x00 9. "SCANOF,SCANOF Interrupt Enable" "0,1" bitfld.long 0x00 8. "SINGLEOF,SINGLEOF Interrupt Enable" "0,1" newline bitfld.long 0x00 1. "SCAN,SCAN Interrupt Enable" "0,1" bitfld.long 0x00 0. "SINGLE,SINGLE Interrupt Enable" "0,1" rgroup.long 0x48++0x03 line.long 0x00 "SINGLEDATA,Single Conversion Result Data" hexmask.long 0x00 0.--31. 1. "DATA,Single Conversion Result Data" rgroup.long 0x4C++0x03 line.long 0x00 "SCANDATA,Scan Conversion Result Data" hexmask.long 0x00 0.--31. 1. "DATA,Scan Conversion Result Data" rgroup.long 0x50++0x03 line.long 0x00 "SINGLEDATAP,Single Conversion Result Data Peek Register" hexmask.long 0x00 0.--31. 1. "DATAP,Single Conversion Result Data Peek" rgroup.long 0x54++0x03 line.long 0x00 "SCANDATAP,Scan Sequence Result Data Peek Register" hexmask.long 0x00 0.--31. 1. "DATAP,Scan Conversion Result Data Peek" rgroup.long 0x68++0x03 line.long 0x00 "SCANDATAX,Scan Sequence Result Data + Data Source Register" bitfld.long 0x00 16.--20. "SCANINPUTID,Scan Conversion Input ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Conversion Result Data" rgroup.long 0x6C++0x03 line.long 0x00 "SCANDATAXP,Scan Sequence Result Data + Data Source Peek Register" bitfld.long 0x00 16.--20. "SCANINPUTIDPEEK,Scan Conversion Data Source Peek" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 0.--15. 1. "DATAP,Scan Conversion Result Data Peek" rgroup.long 0x7C++0x03 line.long 0x00 "APORTREQ,APORT Request Status Register" bitfld.long 0x00 9. "APORT4YREQ,1 If the Bus Connected to APORT4Y is Requested" "0,1" bitfld.long 0x00 8. "APORT4XREQ,1 If the Bus Connected to APORT4X is Requested" "0,1" newline bitfld.long 0x00 7. "APORT3YREQ,1 If the Bus Connected to APORT3Y is Requested" "0,1" bitfld.long 0x00 6. "APORT3XREQ,1 If the Bus Connected to APORT3X is Requested" "0,1" newline bitfld.long 0x00 5. "APORT2YREQ,1 If the Bus Connected to APORT2Y is Requested" "0,1" bitfld.long 0x00 4. "APORT2XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" newline bitfld.long 0x00 3. "APORT1YREQ,1 If the Bus Connected to APORT1Y is Requested" "0,1" bitfld.long 0x00 2. "APORT1XREQ,1 If the Bus Connected to APORT1X is Requested" "0,1" newline bitfld.long 0x00 1. "APORT0YREQ,1 If the Bus Connected to APORT0Y is Requested" "0,1" bitfld.long 0x00 0. "APORT0XREQ,1 If the Bus Connected to APORT0X is Requested" "0,1" rgroup.long 0x80++0x03 line.long 0x00 "APORTCONFLICT,APORT Conflict Status Register" bitfld.long 0x00 9. "APORT4YCONFLICT,1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 8. "APORT4XCONFLICT,1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 7. "APORT3YCONFLICT,1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 6. "APORT3XCONFLICT,1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 5. "APORT2YCONFLICT,1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 4. "APORT2XCONFLICT,1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 3. "APORT1YCONFLICT,1 If the Bus Connected to APORT1Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 2. "APORT1XCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 1. "APORT0YCONFLICT,1 If the Bus Connected to APORT0Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 0. "APORT0XCONFLICT,1 If the Bus Connected to APORT0X is in Conflict With Another Peripheral" "0,1" rgroup.long 0x84++0x03 line.long 0x00 "SINGLEFIFOCOUNT,Single FIFO Count Register" bitfld.long 0x00 0.--2. "SINGLEDC,Single Data Count" "0,1,2,3,4,5,6,7" rgroup.long 0x88++0x03 line.long 0x00 "SCANFIFOCOUNT,Scan FIFO Count Register" bitfld.long 0x00 0.--2. "SCANDC,Scan Data Count" "0,1,2,3,4,5,6,7" wgroup.long 0x8C++0x03 line.long 0x00 "SINGLEFIFOCLEAR,Single FIFO Clear Register" bitfld.long 0x00 0. "SINGLEFIFOCLEAR,Clear Single FIFO Content" "0,1" wgroup.long 0x90++0x03 line.long 0x00 "SCANFIFOCLEAR,Scan FIFO Clear Register" bitfld.long 0x00 0. "SCANFIFOCLEAR,Clear Scan FIFO Content" "0,1" group.long 0x94++0x03 line.long 0x00 "APORTMASTERDIS,APORT Bus Master Disable Register" bitfld.long 0x00 9. "APORT4YMASTERDIS,APORT4Y Master Disable" "0,1" bitfld.long 0x00 8. "APORT4XMASTERDIS,APORT4X Master Disable" "0,1" newline bitfld.long 0x00 7. "APORT3YMASTERDIS,APORT3Y Master Disable" "0,1" bitfld.long 0x00 6. "APORT3XMASTERDIS,APORT3X Master Disable" "0,1" newline bitfld.long 0x00 5. "APORT2YMASTERDIS,APORT2Y Master Disable" "0,1" bitfld.long 0x00 4. "APORT2XMASTERDIS,APORT2X Master Disable" "0,1" newline bitfld.long 0x00 3. "APORT1YMASTERDIS,APORT1Y Master Disable" "0,1" bitfld.long 0x00 2. "APORT1XMASTERDIS,APORT1X Master Disable" "0,1" tree.end repeat.end tree.end tree "CAN (CAN0)" repeat 2. (list 0. 1.) (list ad:0x40004000 ad:0x40004400) tree "CAN$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 7. "TEST,Test Mode Enable" "0,1" bitfld.long 0x00 6. "CCE,Configuration Change Enable" "0,1" newline bitfld.long 0x00 5. "DAR,Disable Automatic Retransmission" "0,1" bitfld.long 0x00 3. "EIE,Error Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "SIE,Status Change Interrupt Enable" "0,1" bitfld.long 0x00 1. "IE,Module Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "INIT,Initialize" "0,1" group.long 0x04++0x03 line.long 0x00 "STATUS,Status Register" rbitfld.long 0x00 7. "BOFF,Bus Off Status" "0,1" rbitfld.long 0x00 6. "EWARN,Warning Status" "0,1" newline rbitfld.long 0x00 5. "EPASS,Error Passive" "0,1" bitfld.long 0x00 4. "RXOK,Received a Message Successfully" "0,1" newline bitfld.long 0x00 3. "TXOK,Transmitted a Message Successfully" "0,1" bitfld.long 0x00 0.--2. "LEC,Last Error Code" "0: No error occurred during last CAN bus event,1: More than 5 equal bits in a sequence have..,2: A fixed format part of a received frame has..,3: The message this CAN Core transmitted was not..,4: During the transmission of a message (with..,5: During the transmission of a message (or..,6: The CRC check sum was incorrect in the..,7: When the LEC shows the value '7' no CAN bus.." rgroup.long 0x08++0x03 line.long 0x00 "ERRCNT,Error Count Register" bitfld.long 0x00 15. "RECERRP,Receive Error Passive" "0,1" hexmask.long.byte 0x00 8.--14. 1. "REC,Receive Error Counter" newline hexmask.long.byte 0x00 0.--7. 1. "TEC,Transmit Error Counter" group.long 0x0C++0x03 line.long 0x00 "BITTIMING,Bit Timing Register" bitfld.long 0x00 12.--14. "TSEG2,Time Segment After the Sample Point" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--11. "TSEG1,Time Segment Before the Sample Point" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 6.--7. "SJW,Synchronization Jump Width" "0,1,2,3" bitfld.long 0x00 0.--5. "BRP,Baud Rate Prescaler" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x10++0x03 line.long 0x00 "INTID,Interrupt Identification Register" bitfld.long 0x00 15. "INTSTAT,Status Interupt" "0,1" bitfld.long 0x00 0.--5. "INTID,Interrupt Identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x14++0x03 line.long 0x00 "TEST,Test Register" rbitfld.long 0x00 7. "RX,Monitors the Actual Value of CAN_RX Pin" "0,1" bitfld.long 0x00 5.--6. "TX,Control of CAN_TX Pin" "0: Reset value CAN_TX is controlled by the CAN..,1: Sample Point can be monitored at CAN_TX pin,2: CAN_TX pin drives a dominant bit (0) value,3: CAN_TX pin drives a recessive bit (1) value" newline bitfld.long 0x00 4. "LBACK,Loopback Mode" "0,1" bitfld.long 0x00 3. "SILENT,Silent Mode" "0,1" newline bitfld.long 0x00 2. "BASIC,Basic Mode" "0,1" group.long 0x18++0x03 line.long 0x00 "BRPE,BRP Extension Register" bitfld.long 0x00 0.--3. "BRPE,Baud Rate Prescaler Extension" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x1C++0x03 line.long 0x00 "TRANSREQ,Transmission Request Register" hexmask.long 0x00 0.--31. 1. "TXRQSTOUT,Transmission Request Bits (Of All Message Objects)" rgroup.long 0x20++0x03 line.long 0x00 "MESSAGEDATA,New Data Register" hexmask.long 0x00 0.--31. 1. "VALID,DATAVALID Bits (of All Message Objects)" rgroup.long 0x28++0x03 line.long 0x00 "MESSAGESTATE,Message Valid Register" hexmask.long 0x00 0.--31. 1. "VALID,Message Valid Bits (of All Message Objects)" group.long 0x2C++0x03 line.long 0x00 "CONFIG,Configuration Register" bitfld.long 0x00 15. "DBGHALT,Debug Halt" "0,1" rgroup.long 0x30++0x03 line.long 0x00 "IF0IF,Message Object Interrupt Flag Register" hexmask.long 0x00 0.--31. 1. "MESSAGE,Message Object Interrupt Flag" wgroup.long 0x34++0x03 line.long 0x00 "IF0IFS,Message Object Interrupt Flag Set Register" hexmask.long 0x00 0.--31. 1. "MESSAGE,Set MESSAGE Interrupt Flag" wgroup.long 0x38++0x03 line.long 0x00 "IF0IFC,Message Object Interrupt Flag Clear Register" hexmask.long 0x00 0.--31. 1. "MESSAGE,Clear MESSAGE Interrupt Flag" group.long 0x3C++0x03 line.long 0x00 "IF0IEN,Message Object Interrupt Enable Register" hexmask.long 0x00 0.--31. 1. "MESSAGE,MESSAGE Interrupt Enable" rgroup.long 0x40++0x03 line.long 0x00 "IF1IF,Status Interrupt Flag Register" bitfld.long 0x00 0. "STATUS,Status Interrupt Flag" "0,1" wgroup.long 0x44++0x03 line.long 0x00 "IF1IFS,Message Object Interrupt Flag Set Register" bitfld.long 0x00 0. "STATUS,Set STATUS Interrupt Flag" "0,1" wgroup.long 0x48++0x03 line.long 0x00 "IF1IFC,Message Object Interrupt Flag Clear Register" bitfld.long 0x00 0. "STATUS,Clear STATUS Interrupt Flag" "0,1" group.long 0x4C++0x03 line.long 0x00 "IF1IEN,Status Interrupt Enable Register" bitfld.long 0x00 0. "STATUS,STATUS Interrupt Enable" "0,1" group.long 0x50++0x03 line.long 0x00 "ROUTE,I/O Routing Register" bitfld.long 0x00 8.--13. "TXLOC,TX Pin Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." bitfld.long 0x00 2.--7. "RXLOC,RX Pin Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." newline bitfld.long 0x00 0. "TXPEN,TX Pin Enable" "0,1" group.long 0x60++0x03 line.long 0x00 "MIR0_CMDMASK,Interface Command Mask Register" bitfld.long 0x00 7. "WRRD,Write/Read RAM" "0,1" bitfld.long 0x00 6. "MASKACC,Access Mask Bits" "0,1" newline bitfld.long 0x00 5. "ARBACC,Access Arbitration Bits" "0,1" bitfld.long 0x00 4. "CONTROL,Access Control Bits" "0,1" newline bitfld.long 0x00 3. "CLRINTPND,Clear Interrupt Pending Bit" "0,1" bitfld.long 0x00 2. "TXRQSTNEWDAT,Transmission Request Bit/ New Data Bit" "0,1" newline bitfld.long 0x00 1. "DATAA,Access Data Bytes 0-3" "0,1" bitfld.long 0x00 0. "DATAB,CC Channel Mode" "0,1" group.long 0x64++0x03 line.long 0x00 "MIR0_MASK,Interface Mask Register" bitfld.long 0x00 31. "MXTD,Mask Extended Identifier" "0,1" bitfld.long 0x00 30. "MDIR,Mask Message Direction" "0,1" newline hexmask.long 0x00 0.--28. 1. "MASK,Identifier Mask" group.long 0x68++0x03 line.long 0x00 "MIR0_ARB,Interface Arbitration Register" bitfld.long 0x00 31. "MSGVAL,Message Valid" "0,1" bitfld.long 0x00 30. "XTD,Extended Identifier" "0,1" newline bitfld.long 0x00 29. "DIR,Message Direction" "0,1" hexmask.long 0x00 0.--28. 1. "ID,Message Identifier" group.long 0x6C++0x03 line.long 0x00 "MIR0_CTRL,Interface Message Control Register" bitfld.long 0x00 15. "DATAVALID,New Data" "0,1" bitfld.long 0x00 14. "MESSAGEOF,Message Lost (only Valid for Message Objects With Direction = Receive)" "0,1" newline bitfld.long 0x00 13. "INTPND,Interrupt Pending" "0,1" bitfld.long 0x00 12. "UMASK,Use Acceptance Mask" "0,1" newline bitfld.long 0x00 11. "TXIE,Transmit Interrupt Enable" "0,1" bitfld.long 0x00 10. "RXIE,Receive Interrupt Enable" "0,1" newline bitfld.long 0x00 9. "RMTEN,Remote Enable" "0,1" bitfld.long 0x00 8. "TXRQST,Transmit Request" "0,1" newline bitfld.long 0x00 7. "EOB,End of Buffer" "0,1" bitfld.long 0x00 0.--3. "DLC,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x70++0x03 line.long 0x00 "MIR0_DATAL,Interface Data a Register" hexmask.long.byte 0x00 24.--31. 1. "DATA3,Fourth Byte of CAN Data Frame" hexmask.long.byte 0x00 16.--23. 1. "DATA2,Third Byte of CAN Data Frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA1,Second Byte of CAN Data Frame" hexmask.long.byte 0x00 0.--7. 1. "DATA0,First Byte of CAN Data Frame" group.long 0x74++0x03 line.long 0x00 "MIR0_DATAH,Interface Data B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA7,Eight Byte of CAN Data Frame" hexmask.long.byte 0x00 16.--23. 1. "DATA6,Seventh Byte of CAN Data Frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA5,Sixth Byte of CAN Data Frame" hexmask.long.byte 0x00 0.--7. 1. "DATA4,Fifth Byte of CAN Data Frame" group.long 0x78++0x03 line.long 0x00 "MIR0_CMDREQ,Interface Command Request Register" rbitfld.long 0x00 15. "BUSY,Busy Flag" "0,1" bitfld.long 0x00 0.--5. "MSGNUM,Message Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x80++0x03 line.long 0x00 "MIR1_CMDMASK,Interface Command Mask Register" bitfld.long 0x00 7. "WRRD,Write/Read RAM" "0,1" bitfld.long 0x00 6. "MASKACC,Access Mask Bits" "0,1" newline bitfld.long 0x00 5. "ARBACC,Access Arbitration Bits" "0,1" bitfld.long 0x00 4. "CONTROL,Access Control Bits" "0,1" newline bitfld.long 0x00 3. "CLRINTPND,Clear Interrupt Pending Bit" "0,1" bitfld.long 0x00 2. "TXRQSTNEWDAT,Transmission Request Bit/ New Data Bit" "0,1" newline bitfld.long 0x00 1. "DATAA,Access Data Bytes 0-3" "0,1" bitfld.long 0x00 0. "DATAB,CC Channel Mode" "0,1" group.long 0x84++0x03 line.long 0x00 "MIR1_MASK,Interface Mask Register" bitfld.long 0x00 31. "MXTD,Mask Extended Identifier" "0,1" bitfld.long 0x00 30. "MDIR,Mask Message Direction" "0,1" newline hexmask.long 0x00 0.--28. 1. "MASK,Identifier Mask" group.long 0x88++0x03 line.long 0x00 "MIR1_ARB,Interface Arbitration Register" bitfld.long 0x00 31. "MSGVAL,Message Valid" "0,1" bitfld.long 0x00 30. "XTD,Extended Identifier" "0,1" newline bitfld.long 0x00 29. "DIR,Message Direction" "0,1" hexmask.long 0x00 0.--28. 1. "ID,Message Identifier" group.long 0x8C++0x03 line.long 0x00 "MIR1_CTRL,Interface Message Control Register" bitfld.long 0x00 15. "DATAVALID,New Data" "0,1" bitfld.long 0x00 14. "MESSAGEOF,Message Lost (only Valid for Message Objects With Direction = Receive)" "0,1" newline bitfld.long 0x00 13. "INTPND,Interrupt Pending" "0,1" bitfld.long 0x00 12. "UMASK,Use Acceptance Mask" "0,1" newline bitfld.long 0x00 11. "TXIE,Transmit Interrupt Enable" "0,1" bitfld.long 0x00 10. "RXIE,Receive Interrupt Enable" "0,1" newline bitfld.long 0x00 9. "RMTEN,Remote Enable" "0,1" bitfld.long 0x00 8. "TXRQST,Transmit Request" "0,1" newline bitfld.long 0x00 7. "EOB,End of Buffer" "0,1" bitfld.long 0x00 0.--3. "DLC,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x90++0x03 line.long 0x00 "MIR1_DATAL,Interface Data a Register" hexmask.long.byte 0x00 24.--31. 1. "DATA3,Fourth Byte of CAN Data Frame" hexmask.long.byte 0x00 16.--23. 1. "DATA2,Third Byte of CAN Data Frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA1,Second Byte of CAN Data Frame" hexmask.long.byte 0x00 0.--7. 1. "DATA0,First Byte of CAN Data Frame" group.long 0x94++0x03 line.long 0x00 "MIR1_DATAH,Interface Data B Register" hexmask.long.byte 0x00 24.--31. 1. "DATA7,Eight Byte of CAN Data Frame" hexmask.long.byte 0x00 16.--23. 1. "DATA6,Seventh Byte of CAN Data Frame" newline hexmask.long.byte 0x00 8.--15. 1. "DATA5,Sixth Byte of CAN Data Frame" hexmask.long.byte 0x00 0.--7. 1. "DATA4,Fifth Byte of CAN Data Frame" group.long 0x98++0x03 line.long 0x00 "MIR1_CMDREQ,Interface Command Request Register" rbitfld.long 0x00 15. "BUSY,Busy Flag" "0,1" bitfld.long 0x00 0.--5. "MSGNUM,Message Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" tree.end repeat.end tree.end tree "CMU" base ad:0x400E4000 group.long 0x00++0x03 line.long 0x00 "CTRL,CMU Control Register" bitfld.long 0x00 20. "HFPERCLKEN,HFPERCLK Enable" "0,1" bitfld.long 0x00 16. "WSHFLE,Wait State for High-Frequency LE Interface" "0,1" newline bitfld.long 0x00 10.--14. "CLKOUTSEL2,Clock Output Select 2" "0: DISABLED,1: ULFRCO (directly from oscillator),2: LFRCO (directly from oscillator),3: LFXO (directly from oscillator),?,5: HFXO divided by two (qualified),6: HFXO (directly from oscillator),7: HFEXPCLK,8: HFXO doubler (qualified) (doubling activated..,9: ULFRCO (qualified),10: LFRCO (qualified),11: LFXO (qualified),12: HFRCO (qualified),13: AUXHFRCO (qualified),14: HFXO (qualified),15: HFSRCCLK,?,?,18: USHFRCO (qualified),?..." bitfld.long 0x00 5.--9. "CLKOUTSEL1,Clock Output Select 1" "0: DISABLED,1: ULFRCO (directly from oscillator),2: LFRCO (directly from oscillator),3: LFXO (directly from oscillator),?,?,6: HFXO (directly from oscillator),7: HFEXPCLK,?,9: ULFRCO (qualified),10: LFRCO (qualified),11: LFXO (qualified),12: HFRCO (qualified),13: AUXHFRCO (qualified),14: HFXO (qualified),15: HFSRCCLK,?,?,18: USHFRCO (qualified),?..." newline bitfld.long 0x00 0.--4. "CLKOUTSEL0,Clock Output Select 0" "0: DISABLED,1: ULFRCO (directly from oscillator),2: LFRCO (directly from oscillator),3: LFXO (directly from oscillator),?,?,6: HFXO (directly from oscillator),7: HFEXPCLK,?,9: ULFRCO (qualified),10: LFRCO (qualified),11: LFXO (qualified),12: HFRCO (qualified),13: AUXHFRCO (qualified),14: HFXO (qualified),15: HFSRCCLK,?,?,18: USHFRCO (qualified),?..." group.long 0x08++0x03 line.long 0x00 "USHFRCOCTRL,USHFRCO Control Register" bitfld.long 0x00 28.--31. "VREFTC,USHFRCO Temperature Coefficient Trim on Comparator Reference" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 27. "FINETUNINGEN,Enable Reference for Fine Tuning" "0,1" newline bitfld.long 0x00 25.--26. "CLKDIV,Locally Divide USHFRCO Clock Output" "0: Divide by 1,1: Divide by 2,2: Divide by 4,?..." bitfld.long 0x00 24. "LDOHP,USHFRCO LDO High Power Mode" "0,1" newline bitfld.long 0x00 21.--23. "CMPBIAS,USHFRCO Comparator Bias Current" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--20. "FREQRANGE,USHFRCO Frequency Range" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--13. "FINETUNING,USHFRCO Fine Tuning Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.byte 0x00 0.--6. 1. "TUNING,USHFRCO Tuning Value" group.long 0x10++0x03 line.long 0x00 "HFRCOCTRL,HFRCO Control Register" bitfld.long 0x00 28.--31. "VREFTC,HFRCO Temperature Coefficient Trim on Comparator Reference" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 27. "FINETUNINGEN,Enable Reference for Fine Tuning" "0,1" newline bitfld.long 0x00 25.--26. "CLKDIV,Locally Divide HFRCO Clock Output" "0: Divide by 1,1: Divide by 2,2: Divide by 4,?..." bitfld.long 0x00 24. "LDOHP,HFRCO LDO High Power Mode" "0,1" newline bitfld.long 0x00 21.--23. "CMPBIAS,HFRCO Comparator Bias Current" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--20. "FREQRANGE,HFRCO Frequency Range" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--13. "FINETUNING,HFRCO Fine Tuning Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.byte 0x00 0.--6. 1. "TUNING,HFRCO Tuning Value" group.long 0x18++0x03 line.long 0x00 "AUXHFRCOCTRL,AUXHFRCO Control Register" bitfld.long 0x00 28.--31. "VREFTC,AUXHFRCO Temperature Coefficient Trim on Comparator Reference" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 27. "FINETUNINGEN,Enable Reference for Fine Tuning" "0,1" newline bitfld.long 0x00 25.--26. "CLKDIV,Locally Divide AUXHFRCO Clock Output" "0: Divide by 1,1: Divide by 2,2: Divide by 4,?..." bitfld.long 0x00 24. "LDOHP,AUXHFRCO LDO High Power Mode" "0,1" newline bitfld.long 0x00 21.--23. "CMPBIAS,AUXHFRCO Comparator Bias Current" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--20. "FREQRANGE,AUXHFRCO Frequency Range" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--13. "FINETUNING,AUXHFRCO Fine Tuning Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.byte 0x00 0.--6. 1. "TUNING,AUXHFRCO Tuning Value" group.long 0x20++0x03 line.long 0x00 "LFRCOCTRL,LFRCO Control Register" bitfld.long 0x00 28.--31. "GMCCURTUNE,Tuning of Gmc Current" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--25. "TIMEOUT,LFRCO Timeout" "0: Timeout period of 2 cycles,1: Timeout period of 16 cycles,2: Timeout period of 32 cycles,?..." newline bitfld.long 0x00 20.--21. "VREFUPDATE,Control Vref Update Rate" "0: 32 clocks,1: 64 clocks,2: 128 clocks,3: 256 clocks" bitfld.long 0x00 18. "ENDEM,Enable Dynamic Element Matching" "0,1" newline bitfld.long 0x00 17. "ENCHOP,Enable Comparator Chopping" "0,1" bitfld.long 0x00 16. "ENVREF,Enable Duty Cycling of Vref" "0,1" newline hexmask.long.word 0x00 0.--8. 1. "TUNING,LFRCO Tuning Value" group.long 0x24++0x03 line.long 0x00 "HFXOCTRL,HFXO Control Register" bitfld.long 0x00 29. "AUTOSTARTSELEM0EM1,Automatically Start and Select of HFXO Upon EM0/EM1 Entry From EM2/EM3" "0,1" bitfld.long 0x00 28. "AUTOSTARTEM0EM1,Automatically Start of HFXO Upon EM0/EM1 Entry From EM2/EM3" "0,1" newline bitfld.long 0x00 24.--26. "LFTIMEOUT,HFXO Low Frequency Timeout" "0: Timeout period of 0 cycles (disabled),1: Timeout period of 2 cycles,2: Timeout period of 4 cycles,3: Timeout period of 16 cycles,4: Timeout period of 32 cycles,5: Timeout period of 64 cycles,6: Timeout period of 1024 cycles,7: Timeout period of 4096 cycles" bitfld.long 0x00 4.--5. "PEAKDETMODE,HFXO Automatic Peak Detection Mode" "0: Automatic control of HFXO peak detection..,1: Automatic control of HFXO peak detection..,2: CMU_CMD HFXOPEAKDETSTART can be used to..,3: CMU_HFXOSTEADYSTATECTRL IBTRIMXOCORE and.." newline bitfld.long 0x00 3. "HFXOX2EN,Enable Double Frequency on HFXOX2 Clock (compared to HFXO Clock)" "0,1" bitfld.long 0x00 0.--1. "MODE,HFXO Mode" "0: 4 MHz - 50 MHz crystal oscillator,1: An AC coupled buffer is coupled in series..,2: A DC coupled buffer is coupled in series with..,3: Digital external clock can be supplied on.." group.long 0x28++0x03 line.long 0x00 "HFXOCTRL1,HFXO Control 1" bitfld.long 0x00 12.--14. "PEAKDETTHR,Sets the Amplitude Detection Level (mV)" "0: 50mV amplitude detection level,1: 75mV amplitude detection level,2: 115mV amplitude detection level,3: 160mV amplitude detection level,4: 220mV amplitude detection level,5: 260mV amplitude detection level,6: 320mV amplitude detection level,7: Same as THR6" group.long 0x2C++0x03 line.long 0x00 "HFXOSTARTUPCTRL,HFXO Startup Control" hexmask.long.word 0x00 11.--19. 1. "CTUNE,Sets Oscillator Tuning Capacitance" hexmask.long.word 0x00 0.--10. 1. "IBTRIMXOCORE,Sets the Startup Oscillator Core Bias Current" group.long 0x30++0x03 line.long 0x00 "HFXOSTEADYSTATECTRL,HFXO Steady State Control" bitfld.long 0x00 27. "PEAKMONEN,Automatically Perform Peak Monitoring Algorithm on Every Rising Edge of ULFRCO" "0,1" bitfld.long 0x00 26. "PEAKDETEN,Enables Oscillator Peak Detectors" "0,1" newline hexmask.long.word 0x00 11.--19. 1. "CTUNE,Sets Oscillator Tuning Capacitance" hexmask.long.word 0x00 0.--10. 1. "IBTRIMXOCORE,Sets the Steady State Oscillator Core Bias Current" group.long 0x34++0x03 line.long 0x00 "HFXOTIMEOUTCTRL,HFXO Timeout Control" bitfld.long 0x00 12.--15. "PEAKDETTIMEOUT,Wait Duration in HFXO Peak Detection Wait State" "0: Timeout period of 2 cycles,1: Timeout period of 4 cycles,2: Timeout period of 16 cycles,3: Timeout period of 32 cycles,4: Timeout period of 64 cycles,5: Timeout period of 128 cycles,6: Timeout period of 256 cycles,7: Timeout period of 1024 cycles,8: Timeout period of 2048 cycles,9: Timeout period of 4096 cycles,10: Timeout period of 8192 cycles,11: Timeout period of 16384 cycles,12: Timeout period of 32768 cycles,13: Timeout period of 65536 cycles,14: Timeout period of 131072 cycles,?..." bitfld.long 0x00 4.--7. "STEADYTIMEOUT,Wait Duration in HFXO Startup Steady Wait State" "0: Timeout period of 2 cycles,1: Timeout period of 4 cycles,2: Timeout period of 16 cycles,3: Timeout period of 32 cycles,4: Timeout period of 64 cycles,5: Timeout period of 128 cycles,6: Timeout period of 256 cycles,7: Timeout period of 1024 cycles,8: Timeout period of 2048 cycles,9: Timeout period of 4096 cycles,10: Timeout period of 8192 cycles,11: Timeout period of 16384 cycles,12: Timeout period of 32768 cycles,13: Timeout period of 65536 cycles,14: Timeout period of 131072 cycles,?..." newline bitfld.long 0x00 0.--3. "STARTUPTIMEOUT,Wait Duration in HFXO Startup Enable Wait State" "0: Timeout period of 2 cycles,1: Timeout period of 4 cycles,2: Timeout period of 16 cycles,3: Timeout period of 32 cycles,4: Timeout period of 64 cycles,5: Timeout period of 128 cycles,6: Timeout period of 256 cycles,7: Timeout period of 1024 cycles,8: Timeout period of 2048 cycles,9: Timeout period of 4096 cycles,10: Timeout period of 8192 cycles,11: Timeout period of 16384 cycles,12: Timeout period of 32768 cycles,13: Timeout period of 65536 cycles,14: Timeout period of 131072 cycles,?..." group.long 0x38++0x03 line.long 0x00 "LFXOCTRL,LFXO Control Register" bitfld.long 0x00 24.--26. "TIMEOUT,LFXO Timeout" "0: Timeout period of 2 cycles,1: Timeout period of 256 cycles,2: Timeout period of 1024 cycles,3: Timeout period of 2048 cycles,4: Timeout period of 4096 cycles,5: Timeout period of 8192 cycles,6: Timeout period of 16384 cycles,7: Timeout period of 32768 cycles" bitfld.long 0x00 20. "BUFCUR,LFXO Buffer Bias Current" "0,1" newline bitfld.long 0x00 16.--17. "CUR,LFXO Current Trim" "0,1,2,3" bitfld.long 0x00 15. "AGC,LFXO AGC Enable" "0,1" newline bitfld.long 0x00 14. "HIGHAMPL,LFXO High XTAL Oscillation Amplitude Enable" "0,1" bitfld.long 0x00 11.--12. "GAIN,LFXO Startup Gain" "0,1,2,3" newline bitfld.long 0x00 8.--9. "MODE,LFXO Mode" "0: 32768 Hz crystal oscillator,1: An AC coupled buffer is coupled in series..,2: Digital external clock on LFXTAL_N pin,?..." hexmask.long.byte 0x00 0.--6. 1. "TUNING,LFXO Internal Capacitor Array Tuning Value" group.long 0x40++0x03 line.long 0x00 "DPLLCTRL,DPLL Control Register" bitfld.long 0x00 6. "DITHEN,Dither Enable Control" "0,1" bitfld.long 0x00 3.--4. "REFSEL,Reference Clock Selection Control" "0: HFXO selected,1: LFXO selected,2: USHFRCO selected,3: CLKIN0 selected" newline bitfld.long 0x00 2. "AUTORECOVER,Automatic Recovery Ctrl" "0,1" bitfld.long 0x00 1. "EDGESEL,Reference Edge Select" "0,1" newline bitfld.long 0x00 0. "MODE,Operating Mode Control" "0,1" group.long 0x44++0x03 line.long 0x00 "DPLLCTRL1,DPLL Control Register" hexmask.long.word 0x00 16.--27. 1. "N,Factor N" hexmask.long.word 0x00 0.--11. 1. "M,Factor M" group.long 0x50++0x03 line.long 0x00 "CALCTRL,Calibration Control Register" bitfld.long 0x00 24.--27. "PRSDOWNSEL,PRS Select for PRS Input When Selected in DOWNSEL" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" bitfld.long 0x00 16.--19. "PRSUPSEL,PRS Select for PRS Input When Selected in UPSEL" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 8. "CONT,Continuous Calibration" "0,1" bitfld.long 0x00 4.--7. "DOWNSEL,Calibration Down-counter Select" "0: Select HFCLK for down-counter,1: Select HFXO for down-counter,2: Select LFXO for down-counter,3: Select HFRCO for down-counter,4: Select LFRCO for down-counter,5: Select AUXHFRCO for down-counter,6: Select PRS input selected by PRSDOWNSEL as..,?,8: Select USHFRCO for down-counter,?..." newline bitfld.long 0x00 0.--2. "UPSEL,Calibration Up-counter Select" "0: Select HFXO as up-counter,1: Select LFXO as up-counter,2: Select HFRCO as up-counter,3: Select LFRCO as up-counter,4: Select AUXHFRCO as up-counter,5: Select PRS input selected by PRSUPSEL as..,?,7: Select USHFRCO as up-counter" group.long 0x54++0x03 line.long 0x00 "CALCNT,Calibration Counter Register" hexmask.long.tbyte 0x00 0.--19. 1. "CALCNT,Calibration Counter" wgroup.long 0x60++0x03 line.long 0x00 "OSCENCMD,Oscillator Enable/Disable Command Register" bitfld.long 0x00 13. "DPLLDIS,DPLL Disable" "0,1" bitfld.long 0x00 12. "DPLLEN,DPLL Enable" "0,1" newline bitfld.long 0x00 11. "USHFRCODIS,USHFRCO Disable" "0,1" bitfld.long 0x00 10. "USHFRCOEN,USHFRCO Enable" "0,1" newline bitfld.long 0x00 9. "LFXODIS,LFXO Disable" "0,1" bitfld.long 0x00 8. "LFXOEN,LFXO Enable" "0,1" newline bitfld.long 0x00 7. "LFRCODIS,LFRCO Disable" "0,1" bitfld.long 0x00 6. "LFRCOEN,LFRCO Enable" "0,1" newline bitfld.long 0x00 5. "AUXHFRCODIS,AUXHFRCO Disable" "0,1" bitfld.long 0x00 4. "AUXHFRCOEN,AUXHFRCO Enable" "0,1" newline bitfld.long 0x00 3. "HFXODIS,HFXO Disable" "0,1" bitfld.long 0x00 2. "HFXOEN,HFXO Enable" "0,1" newline bitfld.long 0x00 1. "HFRCODIS,HFRCO Disable" "0,1" bitfld.long 0x00 0. "HFRCOEN,HFRCO Enable" "0,1" wgroup.long 0x64++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 4. "HFXOPEAKDETSTART,HFXO Peak Detection Start" "0,1" bitfld.long 0x00 1. "CALSTOP,Calibration Stop" "0,1" newline bitfld.long 0x00 0. "CALSTART,Calibration Start" "0,1" group.long 0x70++0x03 line.long 0x00 "DBGCLKSEL,Debug Trace Clock Select" bitfld.long 0x00 0.--1. "DBG,Debug Trace Clock" "0: AUXHFRCO is the debug trace clock,1: HFCLK is the debug trace clock,2: HFRCO divided by 2 is the debug trace clock,?..." wgroup.long 0x74++0x03 line.long 0x00 "HFCLKSEL,High Frequency Clock Select Command Register" bitfld.long 0x00 0.--2. "HF,HFCLK Select" "?,1: Select HFRCO as HFCLK,2: Select HFXO as HFCLK,3: Select LFRCO as HFCLK,4: Select LFXO as HFCLK,5: Select HFRCO divided by 2 as HFCLK,6: Select USHFRCO as HFCLK,7: Select CLKIN0 as HFCLK" group.long 0x80++0x03 line.long 0x00 "LFACLKSEL,Low Frequency A Clock Select Register" bitfld.long 0x00 0.--2. "LFA,Clock Select for LFA" "0: LFACLK is disabled,1: LFRCO selected as LFACLK,2: LFXO selected as LFACLK,?,4: ULFRCO selected as LFACLK,?..." group.long 0x84++0x03 line.long 0x00 "LFBCLKSEL,Low Frequency B Clock Select Register" bitfld.long 0x00 0.--2. "LFB,Clock Select for LFB" "0: LFBCLK is disabled,1: LFRCO selected as LFBCLK,2: LFXO selected as LFBCLK,3: HFCLK divided by two/four is selected as LFBCLK,4: ULFRCO selected as LFBCLK,?..." group.long 0x88++0x03 line.long 0x00 "LFECLKSEL,Low Frequency E Clock Select Register" bitfld.long 0x00 0.--2. "LFE,Clock Select for LFE" "0: LFECLK is disabled,1: LFRCO selected as LFECLK,2: LFXO selected as LFECLK,?,4: ULFRCO selected as LFECLK,?..." group.long 0x8C++0x03 line.long 0x00 "LFCCLKSEL,Low Frequency C Clock Select Register" bitfld.long 0x00 0.--2. "LFC,Clock Select for LFC" "0: LFCCLK is disabled,1: LFRCO selected as LFCCLK,2: LFXO selected as LFCCLK,?,4: ULFRCO selected as LFCCLK,?..." sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") rgroup.long 0x90++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 29. "ULFRCOPHASE,ULFRCO Clock Phase" "0,1" bitfld.long 0x00 28. "LFRCOPHASE,LFRCO Clock Phase" "0,1" newline bitfld.long 0x00 27. "LFXOPHASE,LFXO Clock Phase" "0,1" bitfld.long 0x00 25. "HFXOAMPLOW,HFXO Amplitude Tuning Value Too Low" "0,1" newline bitfld.long 0x00 22. "HFXOPEAKDETRDY,HFXO Peak Detection Ready" "0,1" bitfld.long 0x00 19. "PDMCLKENS,PDM Clock Enabled Status" "0,1" newline bitfld.long 0x00 18. "QSPI0CLKENS,QSPI0 Clock Enabled Status" "0,1" bitfld.long 0x00 17. "SDIOCLKENS,SDIO Clock Enabled Status" "0,1" newline bitfld.long 0x00 16. "CALRDY,Calibration Ready" "0,1" bitfld.long 0x00 13. "DPLLRDY,DPLL Ready" "0,1" newline bitfld.long 0x00 12. "DPLLENS,DPLL Enable Status" "0,1" bitfld.long 0x00 11. "USHFRCORDY,USHFRCO Ready" "0,1" newline bitfld.long 0x00 10. "USHFRCOENS,USHFRCO Enable Status" "0,1" bitfld.long 0x00 9. "LFXORDY,LFXO Ready" "0,1" newline bitfld.long 0x00 8. "LFXOENS,LFXO Enable Status" "0,1" bitfld.long 0x00 7. "LFRCORDY,LFRCO Ready" "0,1" newline bitfld.long 0x00 6. "LFRCOENS,LFRCO Enable Status" "0,1" bitfld.long 0x00 5. "AUXHFRCORDY,AUXHFRCO Ready" "0,1" newline bitfld.long 0x00 4. "AUXHFRCOENS,AUXHFRCO Enable Status" "0,1" bitfld.long 0x00 3. "HFXORDY,HFXO Ready" "0,1" newline bitfld.long 0x00 2. "HFXOENS,HFXO Enable Status" "0,1" bitfld.long 0x00 1. "HFRCORDY,HFRCO Ready" "0,1" newline bitfld.long 0x00 0. "HFRCOENS,HFRCO Enable Status" "0,1" endif sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") rgroup.long 0x90++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 29. "ULFRCOPHASE,ULFRCO Clock Phase" "0,1" bitfld.long 0x00 28. "LFRCOPHASE,LFRCO Clock Phase" "0,1" newline bitfld.long 0x00 27. "LFXOPHASE,LFXO Clock Phase" "0,1" bitfld.long 0x00 25. "HFXOAMPLOW,HFXO Amplitude Tuning Value Too Low" "0,1" newline bitfld.long 0x00 22. "HFXOPEAKDETRDY,HFXO Peak Detection Ready" "0,1" bitfld.long 0x00 19. "PDMCLKENS,PDM Clock Enabled Status" "0,1" newline bitfld.long 0x00 16. "CALRDY,Calibration Ready" "0,1" bitfld.long 0x00 13. "DPLLRDY,DPLL Ready" "0,1" newline bitfld.long 0x00 12. "DPLLENS,DPLL Enable Status" "0,1" bitfld.long 0x00 11. "USHFRCORDY,USHFRCO Ready" "0,1" newline bitfld.long 0x00 10. "USHFRCOENS,USHFRCO Enable Status" "0,1" bitfld.long 0x00 9. "LFXORDY,LFXO Ready" "0,1" newline bitfld.long 0x00 8. "LFXOENS,LFXO Enable Status" "0,1" bitfld.long 0x00 7. "LFRCORDY,LFRCO Ready" "0,1" newline bitfld.long 0x00 6. "LFRCOENS,LFRCO Enable Status" "0,1" bitfld.long 0x00 5. "AUXHFRCORDY,AUXHFRCO Ready" "0,1" newline bitfld.long 0x00 4. "AUXHFRCOENS,AUXHFRCO Enable Status" "0,1" bitfld.long 0x00 3. "HFXORDY,HFXO Ready" "0,1" newline bitfld.long 0x00 2. "HFXOENS,HFXO Enable Status" "0,1" bitfld.long 0x00 1. "HFRCORDY,HFRCO Ready" "0,1" newline bitfld.long 0x00 0. "HFRCOENS,HFRCO Enable Status" "0,1" endif rgroup.long 0x94++0x03 line.long 0x00 "HFCLKSTATUS,HFCLK Status Register" bitfld.long 0x00 0.--2. "SELECTED,HFCLK Selected" "?,1: HFRCO is selected as HFCLK clock source,2: HFXO is selected as HFCLK clock source,3: LFRCO is selected as HFCLK clock source,4: LFXO is selected as HFCLK clock source,5: HFRCO divided by 2 is selected as HFCLK clock..,6: USHFRCO is selected as HFCLK clock source,7: CLKIN0 is selected as HFCLK clock source" rgroup.long 0x9C++0x03 line.long 0x00 "HFXOTRIMSTATUS,HFXO Trim Status" bitfld.long 0x00 31. "MONVALID,Peak Detection Algorithm or Peak Monitoring Algorithm Found a Value for IBTRIMXOCOREMON" "0,1" bitfld.long 0x00 30. "VALID,Peak Detection Algorithm Found a Value for IBTRIMXOCORE" "0,1" newline hexmask.long.word 0x00 16.--26. 1. "IBTRIMXOCOREMON,Value of IBTRIMXOCORE Found By Automatic HFXO Peak Detection Algorithm or Peak Monitoring Algorithm (completion of Either Algorithm Will Cause an Update of IBTRIMXOCOREMON)" hexmask.long.word 0x00 0.--10. 1. "IBTRIMXOCORE,Value of IBTRIMXOCORE Found By Automatic HFXO Peak Detection Algorithm" rgroup.long 0xA0++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 31. "CMUERR,CMU Error Interrupt Flag" "0,1" bitfld.long 0x00 29. "ULFRCOEDGE,ULFRCO Clock Edge Detected Interrupt Flag" "0,1" newline bitfld.long 0x00 28. "LFRCOEDGE,LFRCO Clock Edge Detected Interrupt Flag" "0,1" bitfld.long 0x00 27. "LFXOEDGE,LFXO Clock Edge Detected Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "DPLLLOCKFAILHIGH,DPLL Lock Failure Low Interrupt Flag" "0,1" bitfld.long 0x00 16. "DPLLLOCKFAILLOW,DPLL Lock Failure Low Interrupt Flag" "0,1" newline bitfld.long 0x00 15. "DPLLRDY,DPLL Lock Interrupt Flag" "0,1" bitfld.long 0x00 14. "LFTIMEOUTERR,Low Frequency Timeout Error Interrupt Flag" "0,1" newline bitfld.long 0x00 13. "HFRCODIS,HFRCO Disable Interrupt Flag" "0,1" bitfld.long 0x00 11. "HFXOPEAKDETRDY,HFXO Automatic Peak Detection Ready Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "HFXOAUTOSW,HFXO Automatic Switch Interrupt Flag" "0,1" bitfld.long 0x00 8. "HFXODISERR,HFXO Disable Error Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "USHFRCORDY,USHFRCO Ready Interrupt Flag" "0,1" bitfld.long 0x00 6. "CALOF,Calibration Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CALRDY,Calibration Ready Interrupt Flag" "0,1" bitfld.long 0x00 4. "AUXHFRCORDY,AUXHFRCO Ready Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "LFXORDY,LFXO Ready Interrupt Flag" "0,1" bitfld.long 0x00 2. "LFRCORDY,LFRCO Ready Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "HFXORDY,HFXO Ready Interrupt Flag" "0,1" bitfld.long 0x00 0. "HFRCORDY,HFRCO Ready Interrupt Flag" "0,1" wgroup.long 0xA4++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 31. "CMUERR,Set CMUERR Interrupt Flag" "0,1" bitfld.long 0x00 29. "ULFRCOEDGE,Set ULFRCOEDGE Interrupt Flag" "0,1" newline bitfld.long 0x00 28. "LFRCOEDGE,Set LFRCOEDGE Interrupt Flag" "0,1" bitfld.long 0x00 27. "LFXOEDGE,Set LFXOEDGE Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "DPLLLOCKFAILHIGH,Set DPLLLOCKFAILHIGH Interrupt Flag" "0,1" bitfld.long 0x00 16. "DPLLLOCKFAILLOW,Set DPLLLOCKFAILLOW Interrupt Flag" "0,1" newline bitfld.long 0x00 15. "DPLLRDY,Set DPLLRDY Interrupt Flag" "0,1" bitfld.long 0x00 14. "LFTIMEOUTERR,Set LFTIMEOUTERR Interrupt Flag" "0,1" newline bitfld.long 0x00 13. "HFRCODIS,Set HFRCODIS Interrupt Flag" "0,1" bitfld.long 0x00 11. "HFXOPEAKDETRDY,Set HFXOPEAKDETRDY Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "HFXOAUTOSW,Set HFXOAUTOSW Interrupt Flag" "0,1" bitfld.long 0x00 8. "HFXODISERR,Set HFXODISERR Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "USHFRCORDY,Set USHFRCORDY Interrupt Flag" "0,1" bitfld.long 0x00 6. "CALOF,Set CALOF Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CALRDY,Set CALRDY Interrupt Flag" "0,1" bitfld.long 0x00 4. "AUXHFRCORDY,Set AUXHFRCORDY Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "LFXORDY,Set LFXORDY Interrupt Flag" "0,1" bitfld.long 0x00 2. "LFRCORDY,Set LFRCORDY Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "HFXORDY,Set HFXORDY Interrupt Flag" "0,1" bitfld.long 0x00 0. "HFRCORDY,Set HFRCORDY Interrupt Flag" "0,1" wgroup.long 0xA8++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 31. "CMUERR,Clear CMUERR Interrupt Flag" "0,1" bitfld.long 0x00 29. "ULFRCOEDGE,Clear ULFRCOEDGE Interrupt Flag" "0,1" newline bitfld.long 0x00 28. "LFRCOEDGE,Clear LFRCOEDGE Interrupt Flag" "0,1" bitfld.long 0x00 27. "LFXOEDGE,Clear LFXOEDGE Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "DPLLLOCKFAILHIGH,Clear DPLLLOCKFAILHIGH Interrupt Flag" "0,1" bitfld.long 0x00 16. "DPLLLOCKFAILLOW,Clear DPLLLOCKFAILLOW Interrupt Flag" "0,1" newline bitfld.long 0x00 15. "DPLLRDY,Clear DPLLRDY Interrupt Flag" "0,1" bitfld.long 0x00 14. "LFTIMEOUTERR,Clear LFTIMEOUTERR Interrupt Flag" "0,1" newline bitfld.long 0x00 13. "HFRCODIS,Clear HFRCODIS Interrupt Flag" "0,1" bitfld.long 0x00 11. "HFXOPEAKDETRDY,Clear HFXOPEAKDETRDY Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "HFXOAUTOSW,Clear HFXOAUTOSW Interrupt Flag" "0,1" bitfld.long 0x00 8. "HFXODISERR,Clear HFXODISERR Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "USHFRCORDY,Clear USHFRCORDY Interrupt Flag" "0,1" bitfld.long 0x00 6. "CALOF,Clear CALOF Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CALRDY,Clear CALRDY Interrupt Flag" "0,1" bitfld.long 0x00 4. "AUXHFRCORDY,Clear AUXHFRCORDY Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "LFXORDY,Clear LFXORDY Interrupt Flag" "0,1" bitfld.long 0x00 2. "LFRCORDY,Clear LFRCORDY Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "HFXORDY,Clear HFXORDY Interrupt Flag" "0,1" bitfld.long 0x00 0. "HFRCORDY,Clear HFRCORDY Interrupt Flag" "0,1" group.long 0xAC++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 31. "CMUERR,CMUERR Interrupt Enable" "0,1" bitfld.long 0x00 29. "ULFRCOEDGE,ULFRCOEDGE Interrupt Enable" "0,1" newline bitfld.long 0x00 28. "LFRCOEDGE,LFRCOEDGE Interrupt Enable" "0,1" bitfld.long 0x00 27. "LFXOEDGE,LFXOEDGE Interrupt Enable" "0,1" newline bitfld.long 0x00 17. "DPLLLOCKFAILHIGH,DPLLLOCKFAILHIGH Interrupt Enable" "0,1" bitfld.long 0x00 16. "DPLLLOCKFAILLOW,DPLLLOCKFAILLOW Interrupt Enable" "0,1" newline bitfld.long 0x00 15. "DPLLRDY,DPLLRDY Interrupt Enable" "0,1" bitfld.long 0x00 14. "LFTIMEOUTERR,LFTIMEOUTERR Interrupt Enable" "0,1" newline bitfld.long 0x00 13. "HFRCODIS,HFRCODIS Interrupt Enable" "0,1" bitfld.long 0x00 11. "HFXOPEAKDETRDY,HFXOPEAKDETRDY Interrupt Enable" "0,1" newline bitfld.long 0x00 9. "HFXOAUTOSW,HFXOAUTOSW Interrupt Enable" "0,1" bitfld.long 0x00 8. "HFXODISERR,HFXODISERR Interrupt Enable" "0,1" newline bitfld.long 0x00 7. "USHFRCORDY,USHFRCORDY Interrupt Enable" "0,1" bitfld.long 0x00 6. "CALOF,CALOF Interrupt Enable" "0,1" newline bitfld.long 0x00 5. "CALRDY,CALRDY Interrupt Enable" "0,1" bitfld.long 0x00 4. "AUXHFRCORDY,AUXHFRCORDY Interrupt Enable" "0,1" newline bitfld.long 0x00 3. "LFXORDY,LFXORDY Interrupt Enable" "0,1" bitfld.long 0x00 2. "LFRCORDY,LFRCORDY Interrupt Enable" "0,1" newline bitfld.long 0x00 1. "HFXORDY,HFXORDY Interrupt Enable" "0,1" bitfld.long 0x00 0. "HFRCORDY,HFRCORDY Interrupt Enable" "0,1" sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") group.long 0xB0++0x03 line.long 0x00 "HFBUSCLKEN0,High Frequency Bus Clock Enable Register 0" bitfld.long 0x00 7. "GPCRC,General Purpose CRC Clock Enable" "0,1" bitfld.long 0x00 6. "LDMA,Linked Direct Memory Access Controller Clock Enable" "0,1" newline bitfld.long 0x00 5. "PRS,Peripheral Reflex System Clock Enable" "0,1" bitfld.long 0x00 4. "GPIO,General purpose Input/Output Clock Enable" "0,1" newline bitfld.long 0x00 2. "EBI,External Bus Interface Clock Enable" "0,1" bitfld.long 0x00 1. "CRYPTO0,Advanced Encryption Standard Accelerator Clock Enable" "0,1" newline bitfld.long 0x00 0. "LE,Low Energy Peripheral Interface Clock Enable" "0,1" endif sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0xB0++0x03 line.long 0x00 "HFBUSCLKEN0,High Frequency Bus Clock Enable Register 0" bitfld.long 0x00 9. "USB,Universal Serial Bus Interface Clock Enable" "0,1" bitfld.long 0x00 8. "QSPI0,Quad-SPI Clock Enable" "0,1" newline bitfld.long 0x00 7. "GPCRC,General Purpose CRC Clock Enable" "0,1" bitfld.long 0x00 6. "LDMA,Linked Direct Memory Access Controller Clock Enable" "0,1" newline bitfld.long 0x00 5. "PRS,Peripheral Reflex System Clock Enable" "0,1" bitfld.long 0x00 4. "GPIO,General purpose Input/Output Clock Enable" "0,1" newline bitfld.long 0x00 3. "SDIO,SDIO Controller Clock Enable" "0,1" bitfld.long 0x00 2. "EBI,External Bus Interface Clock Enable" "0,1" newline bitfld.long 0x00 1. "CRYPTO0,Advanced Encryption Standard Accelerator Clock Enable" "0,1" bitfld.long 0x00 0. "LE,Low Energy Peripheral Interface Clock Enable" "0,1" endif group.long 0xC0++0x03 line.long 0x00 "HFPERCLKEN0,High Frequency Peripheral Clock Enable Register 0" bitfld.long 0x00 19. "TRNG0,True Random Number Generator 0 Clock Enable" "0,1" bitfld.long 0x00 18. "IDAC0,Current Digital to Analog Converter 0 Clock Enable" "0,1" newline bitfld.long 0x00 17. "CRYOTIMER,CRYOTIMER Clock Enable" "0,1" bitfld.long 0x00 16. "PDM,PDM Interface Clock Enable" "0,1" newline bitfld.long 0x00 15. "ADC1,Analog to Digital Converter 0 Clock Enable" "0,1" bitfld.long 0x00 14. "ADC0,Analog to Digital Converter 0 Clock Enable" "0,1" newline bitfld.long 0x00 13. "I2C1,I2C 1 Clock Enable" "0,1" bitfld.long 0x00 12. "I2C0,I2C 0 Clock Enable" "0,1" newline bitfld.long 0x00 11. "ACMP2,Analog Comparator 2 Clock Enable" "0,1" bitfld.long 0x00 10. "ACMP1,Analog Comparator 1 Clock Enable" "0,1" newline bitfld.long 0x00 9. "ACMP0,Analog Comparator 0 Clock Enable" "0,1" bitfld.long 0x00 8. "TIMER3,Timer 3 Clock Enable" "0,1" newline bitfld.long 0x00 7. "TIMER2,Timer 2 Clock Enable" "0,1" bitfld.long 0x00 6. "TIMER1,Timer 1 Clock Enable" "0,1" newline bitfld.long 0x00 5. "TIMER0,Timer 0 Clock Enable" "0,1" bitfld.long 0x00 4. "USART4,Universal Synchronous/Asynchronous Receiver/Transmitter 4 Clock Enable" "0,1" newline bitfld.long 0x00 3. "USART3,Universal Synchronous/Asynchronous Receiver/Transmitter 3 Clock Enable" "0,1" bitfld.long 0x00 2. "USART2,Universal Synchronous/Asynchronous Receiver/Transmitter 2 Clock Enable" "0,1" newline bitfld.long 0x00 1. "USART1,Universal Synchronous/Asynchronous Receiver/Transmitter 1 Clock Enable" "0,1" bitfld.long 0x00 0. "USART0,Universal Synchronous/Asynchronous Receiver/Transmitter 0 Clock Enable" "0,1" group.long 0xC4++0x03 line.long 0x00 "HFPERCLKEN1,High Frequency Peripheral Clock Enable Register 1" bitfld.long 0x00 7. "CSEN,Capacitive touch sense module Clock Enable" "0,1" bitfld.long 0x00 6. "VDAC0,Digital to Analog Converter 0 Clock Enable" "0,1" newline bitfld.long 0x00 5. "CAN1,CAN 1 Clock Enable" "0,1" bitfld.long 0x00 4. "CAN0,CAN 0 Clock Enable" "0,1" newline bitfld.long 0x00 3. "WTIMER1,Wide Timer 0 Clock Enable" "0,1" bitfld.long 0x00 2. "WTIMER0,Wide Timer 0 Clock Enable" "0,1" newline bitfld.long 0x00 1. "UART1,Universal Asynchronous Receiver/Transmitter 1 Clock Enable" "0,1" bitfld.long 0x00 0. "UART0,Universal Asynchronous Receiver/Transmitter 0 Clock Enable" "0,1" sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512") group.long 0xE0++0x03 line.long 0x00 "LFACLKEN0,Low Frequency a Clock Enable Register 0 (Async Reg)" bitfld.long 0x00 4. "RTC,Real-Time Counter Clock Enable" "0,1" bitfld.long 0x00 2. "LESENSE,Low Energy Sensor Interface Clock Enable" "0,1" newline bitfld.long 0x00 1. "LETIMER1,Low Energy Timer 1 Clock Enable" "0,1" bitfld.long 0x00 0. "LETIMER0,Low Energy Timer 0 Clock Enable" "0,1" endif sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0xE0++0x03 line.long 0x00 "LFACLKEN0,Low Frequency a Clock Enable Register 0 (Async Reg)" bitfld.long 0x00 4. "RTC,Real-Time Counter Clock Enable" "0,1" bitfld.long 0x00 3. "LCD,Liquid Crystal Display Controller Clock Enable" "0,1" newline bitfld.long 0x00 2. "LESENSE,Low Energy Sensor Interface Clock Enable" "0,1" bitfld.long 0x00 1. "LETIMER1,Low Energy Timer 1 Clock Enable" "0,1" newline bitfld.long 0x00 0. "LETIMER0,Low Energy Timer 0 Clock Enable" "0,1" endif group.long 0xE8++0x03 line.long 0x00 "LFBCLKEN0,Low Frequency B Clock Enable Register 0 (Async Reg)" bitfld.long 0x00 3. "CSEN,Capacitive touch sense module Clock Enable" "0,1" bitfld.long 0x00 2. "SYSTICK,Clock Enable" "0,1" newline bitfld.long 0x00 1. "LEUART1,Low Energy UART 1 Clock Enable" "0,1" bitfld.long 0x00 0. "LEUART0,Low Energy UART 0 Clock Enable" "0,1" sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") group.long 0xEC++0x03 line.long 0x00 "LFCCLKEN0,Low Frequency C Clock Enable Register 0 (Async Reg)" endif sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0xEC++0x03 line.long 0x00 "LFCCLKEN0,Low Frequency C Clock Enable Register 0 (Async Reg)" bitfld.long 0x00 0. "USB,Universal Serial Bus Interface Clock Enable" "0,1" endif group.long 0xF0++0x03 line.long 0x00 "LFECLKEN0,Low Frequency E Clock Enable Register 0 (Async Reg)" bitfld.long 0x00 0. "RTCC,Real-Time Counter and Calendar Clock Enable" "0,1" group.long 0x100++0x03 line.long 0x00 "HFPRESC,High Frequency Clock Prescaler Register" bitfld.long 0x00 24.--25. "HFCLKLEPRESC,HFCLKLE Prescaler" "0: HFCLKLE is HFBUSCLKLE divided by 2,1: HFCLKLE is HFBUSCLKLE divided by 4,2: HFCLKLE is HFBUSCLKLE divided by 8,?..." bitfld.long 0x00 8.--12. "PRESC,HFCLK Prescaler" "0: NODIVISION,?..." group.long 0x104++0x03 line.long 0x00 "HFBUSPRESC,High Frequency Bus Clock Prescaler Register" hexmask.long.word 0x00 8.--16. 1. "PRESC,HFBUSCLK Prescaler" group.long 0x108++0x03 line.long 0x00 "HFCOREPRESC,High Frequency Core Clock Prescaler Register" hexmask.long.word 0x00 8.--16. 1. "PRESC,HFCORECLK Prescaler" group.long 0x10C++0x03 line.long 0x00 "HFPERPRESC,High Frequency Peripheral Clock Prescaler Register" hexmask.long.word 0x00 8.--16. 1. "PRESC,HFPERCLK Prescaler" group.long 0x114++0x03 line.long 0x00 "HFEXPPRESC,High Frequency Export Clock Prescaler Register" bitfld.long 0x00 8.--12. "PRESC,HFEXPCLK Prescaler" "0: NODIVISION,?..." group.long 0x118++0x03 line.long 0x00 "HFPERPRESCB,High Frequency Peripheral Clock Prescaler B Register" hexmask.long.word 0x00 8.--16. 1. "PRESC,HFPERCLK Prescaler" group.long 0x11C++0x03 line.long 0x00 "HFPERPRESCC,High Frequency Peripheral Clock Prescaler C Register" hexmask.long.word 0x00 8.--16. 1. "PRESC,HFPERCLK Prescaler" sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512") group.long 0x120++0x03 line.long 0x00 "LFAPRESC0,Low Frequency a Prescaler Register 0 (Async Reg)" bitfld.long 0x00 16.--19. "RTC,Real-Time Counter Prescaler" "0: LFACLKRTC = LFACLK,1: LFACLKRTC = LFACLK/2,2: LFACLKRTC = LFACLK/4,3: LFACLKRTC = LFACLK/8,4: LFACLKRTC = LFACLK/16,5: LFACLKRTC = LFACLK/32,6: LFACLKRTC = LFACLK/64,7: LFACLKRTC = LFACLK/128,8: LFACLKRTC = LFACLK/256,9: LFACLKRTC = LFACLK/512,10: LFACLKRTC = LFACLK/1024,11: LFACLKRTC = LFACLK/2048,12: LFACLKRTC = LFACLK/4096,13: LFACLKRTC = LFACLK/8192,14: LFACLKRTC = LFACLK/16384,15: LFACLKRTC = LFACLK/32768" bitfld.long 0x00 8.--9. "LESENSE,Low Energy Sensor Interface Prescaler" "0: LFACLKLESENSE = LFACLK,1: LFACLKLESENSE = LFACLK/2,2: LFACLKLESENSE = LFACLK/4,3: LFACLKLESENSE = LFACLK/8" newline bitfld.long 0x00 4.--7. "LETIMER1,Low Energy Timer 1 Prescaler" "0: LFACLKLETIMER1 = LFACLK,1: LFACLKLETIMER1 = LFACLK/2,2: LFACLKLETIMER1 = LFACLK/4,3: LFACLKLETIMER1 = LFACLK/8,4: LFACLKLETIMER1 = LFACLK/16,5: LFACLKLETIMER1 = LFACLK/32,6: LFACLKLETIMER1 = LFACLK/64,7: LFACLKLETIMER1 = LFACLK/128,8: LFACLKLETIMER1 = LFACLK/256,9: LFACLKLETIMER1 = LFACLK/512,10: LFACLKLETIMER1 = LFACLK/1024,11: LFACLKLETIMER1 = LFACLK/2048,12: LFACLKLETIMER1 = LFACLK/4096,13: LFACLKLETIMER1 = LFACLK/8192,14: LFACLKLETIMER1 = LFACLK/16384,15: LFACLKLETIMER1 = LFACLK/32768" bitfld.long 0x00 0.--3. "LETIMER0,Low Energy Timer 0 Prescaler" "0: LFACLKLETIMER0 = LFACLK,1: LFACLKLETIMER0 = LFACLK/2,2: LFACLKLETIMER0 = LFACLK/4,3: LFACLKLETIMER0 = LFACLK/8,4: LFACLKLETIMER0 = LFACLK/16,5: LFACLKLETIMER0 = LFACLK/32,6: LFACLKLETIMER0 = LFACLK/64,7: LFACLKLETIMER0 = LFACLK/128,8: LFACLKLETIMER0 = LFACLK/256,9: LFACLKLETIMER0 = LFACLK/512,10: LFACLKLETIMER0 = LFACLK/1024,11: LFACLKLETIMER0 = LFACLK/2048,12: LFACLKLETIMER0 = LFACLK/4096,13: LFACLKLETIMER0 = LFACLK/8192,14: LFACLKLETIMER0 = LFACLK/16384,15: LFACLKLETIMER0 = LFACLK/32768" endif sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0x120++0x03 line.long 0x00 "LFAPRESC0,Low Frequency a Prescaler Register 0 (Async Reg)" bitfld.long 0x00 16.--19. "RTC,Real-Time Counter Prescaler" "0: LFACLKRTC = LFACLK,1: LFACLKRTC = LFACLK/2,2: LFACLKRTC = LFACLK/4,3: LFACLKRTC = LFACLK/8,4: LFACLKRTC = LFACLK/16,5: LFACLKRTC = LFACLK/32,6: LFACLKRTC = LFACLK/64,7: LFACLKRTC = LFACLK/128,8: LFACLKRTC = LFACLK/256,9: LFACLKRTC = LFACLK/512,10: LFACLKRTC = LFACLK/1024,11: LFACLKRTC = LFACLK/2048,12: LFACLKRTC = LFACLK/4096,13: LFACLKRTC = LFACLK/8192,14: LFACLKRTC = LFACLK/16384,15: LFACLKRTC = LFACLK/32768" bitfld.long 0x00 12.--14. "LCD,Liquid Crystal Display Controller Prescaler" "0: LFACLKLCD = LFACLK,1: LFACLKLCD = LFACLK/2,2: LFACLKLCD = LFACLK/4,3: LFACLKLCD = LFACLK/8,4: LFACLKLCD = LFACLK/16,5: LFACLKLCD = LFACLK/32,6: LFACLKLCD = LFACLK/64,7: LFACLKLCD = LFACLK/128" newline bitfld.long 0x00 8.--9. "LESENSE,Low Energy Sensor Interface Prescaler" "0: LFACLKLESENSE = LFACLK,1: LFACLKLESENSE = LFACLK/2,2: LFACLKLESENSE = LFACLK/4,3: LFACLKLESENSE = LFACLK/8" bitfld.long 0x00 4.--7. "LETIMER1,Low Energy Timer 1 Prescaler" "0: LFACLKLETIMER1 = LFACLK,1: LFACLKLETIMER1 = LFACLK/2,2: LFACLKLETIMER1 = LFACLK/4,3: LFACLKLETIMER1 = LFACLK/8,4: LFACLKLETIMER1 = LFACLK/16,5: LFACLKLETIMER1 = LFACLK/32,6: LFACLKLETIMER1 = LFACLK/64,7: LFACLKLETIMER1 = LFACLK/128,8: LFACLKLETIMER1 = LFACLK/256,9: LFACLKLETIMER1 = LFACLK/512,10: LFACLKLETIMER1 = LFACLK/1024,11: LFACLKLETIMER1 = LFACLK/2048,12: LFACLKLETIMER1 = LFACLK/4096,13: LFACLKLETIMER1 = LFACLK/8192,14: LFACLKLETIMER1 = LFACLK/16384,15: LFACLKLETIMER1 = LFACLK/32768" newline bitfld.long 0x00 0.--3. "LETIMER0,Low Energy Timer 0 Prescaler" "0: LFACLKLETIMER0 = LFACLK,1: LFACLKLETIMER0 = LFACLK/2,2: LFACLKLETIMER0 = LFACLK/4,3: LFACLKLETIMER0 = LFACLK/8,4: LFACLKLETIMER0 = LFACLK/16,5: LFACLKLETIMER0 = LFACLK/32,6: LFACLKLETIMER0 = LFACLK/64,7: LFACLKLETIMER0 = LFACLK/128,8: LFACLKLETIMER0 = LFACLK/256,9: LFACLKLETIMER0 = LFACLK/512,10: LFACLKLETIMER0 = LFACLK/1024,11: LFACLKLETIMER0 = LFACLK/2048,12: LFACLKLETIMER0 = LFACLK/4096,13: LFACLKLETIMER0 = LFACLK/8192,14: LFACLKLETIMER0 = LFACLK/16384,15: LFACLKLETIMER0 = LFACLK/32768" endif group.long 0x128++0x03 line.long 0x00 "LFBPRESC0,Low Frequency B Prescaler Register 0 (Async Reg)" bitfld.long 0x00 12.--13. "CSEN,Capacitive touch sense module Prescaler" "0: LFBCLKCSEN = LFBCLK/16,1: LFBCLKCSEN = LFBCLK/32,2: LFBCLKCSEN = LFBCLK/64,3: LFBCLKCSEN = LFBCLK/128" rbitfld.long 0x00 8.--11. "SYSTICK,Prescaler" "0: LFBCLKSYSTICK = LFBCLK,?..." newline bitfld.long 0x00 4.--5. "LEUART1,Low Energy UART 1 Prescaler" "0: LFBCLKLEUART1 = LFBCLK,1: LFBCLKLEUART1 = LFBCLK/2,2: LFBCLKLEUART1 = LFBCLK/4,3: LFBCLKLEUART1 = LFBCLK/8" bitfld.long 0x00 0.--1. "LEUART0,Low Energy UART 0 Prescaler" "0: LFBCLKLEUART0 = LFBCLK,1: LFBCLKLEUART0 = LFBCLK/2,2: LFBCLKLEUART0 = LFBCLK/4,3: LFBCLKLEUART0 = LFBCLK/8" group.long 0x130++0x03 line.long 0x00 "LFEPRESC0,Low Frequency E Prescaler Register 0 (Async Reg)" bitfld.long 0x00 0.--1. "RTCC,Real-Time Counter and Calendar Prescaler" "0: LFECLKRTCC = LFECLK,1: LFECLKRTCC = LFECLK/2,2: LFECLKRTCC = LFECLK/4,?..." rgroup.long 0x140++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 30. "USHFRCOBSY,USHFRCO Busy" "0,1" bitfld.long 0x00 29. "LFXOBSY,LFXO Busy" "0,1" newline bitfld.long 0x00 28. "HFXOBSY,HFXO Busy" "0,1" bitfld.long 0x00 27. "LFRCOVREFBSY,LFRCO VREF Busy" "0,1" newline bitfld.long 0x00 26. "LFRCOBSY,LFRCO Busy" "0,1" bitfld.long 0x00 25. "AUXHFRCOBSY,AUXHFRCO Busy" "0,1" newline bitfld.long 0x00 24. "HFRCOBSY,HFRCO Busy" "0,1" bitfld.long 0x00 18. "LFEPRESC0,Low Frequency E Prescaler 0 Busy" "0,1" newline bitfld.long 0x00 16. "LFECLKEN0,Low Frequency E Clock Enable 0 Busy" "0,1" bitfld.long 0x00 8. "LFCCLKEN0,Low Frequency C Clock Enable 0 Busy" "0,1" newline bitfld.long 0x00 6. "LFBPRESC0,Low Frequency B Prescaler 0 Busy" "0,1" bitfld.long 0x00 4. "LFBCLKEN0,Low Frequency B Clock Enable 0 Busy" "0,1" newline bitfld.long 0x00 2. "LFAPRESC0,Low Frequency a Prescaler 0 Busy" "0,1" bitfld.long 0x00 0. "LFACLKEN0,Low Frequency a Clock Enable 0 Busy" "0,1" group.long 0x144++0x03 line.long 0x00 "FREEZE,Freeze Register" bitfld.long 0x00 0. "REGFREEZE,Register Update Freeze" "0,1" group.long 0x150++0x03 line.long 0x00 "PCNTCTRL,PCNT Control Register" bitfld.long 0x00 5. "PCNT2CLKSEL,PCNT2 Clock Select" "0,1" bitfld.long 0x00 4. "PCNT2CLKEN,PCNT2 Clock Enable" "0,1" newline bitfld.long 0x00 3. "PCNT1CLKSEL,PCNT1 Clock Select" "0,1" bitfld.long 0x00 2. "PCNT1CLKEN,PCNT1 Clock Enable" "0,1" newline bitfld.long 0x00 1. "PCNT0CLKSEL,PCNT0 Clock Select" "0,1" bitfld.long 0x00 0. "PCNT0CLKEN,PCNT0 Clock Enable" "0,1" group.long 0x15C++0x03 line.long 0x00 "ADCCTRL,ADC Control Register" bitfld.long 0x00 24. "ADC1CLKINV,Invert Clock Selected By ADC1CLKSEL" "0,1" bitfld.long 0x00 20.--21. "ADC1CLKSEL,ADC1 Clock Select" "0: ADC1 is not clocked,1: AUXHFRCO is clocking ADC1,2: HFXO is clocking ADC1,3: HFSRCCLK is clocking ADC1" newline bitfld.long 0x00 16.--17. "ADC1CLKDIV,ADC1 Clock Prescaler" "0: NODIVISION,?..." bitfld.long 0x00 8. "ADC0CLKINV,Invert Clock Selected By ADC0CLKSEL" "0,1" newline bitfld.long 0x00 4.--5. "ADC0CLKSEL,ADC0 Clock Select" "0: ADC0 is not clocked,1: AUXHFRCO is clocking ADC0,2: HFXO is clocking ADC0,3: HFSRCCLK is clocking ADC0" bitfld.long 0x00 0.--1. "ADC0CLKDIV,ADC0 Clock Prescaler" "0: NODIVISION,?..." sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0x160++0x03 line.long 0x00 "SDIOCTRL,SDIO Control Register" bitfld.long 0x00 7. "SDIOCLKDIS,SDIO Reference Clock Disable" "0,1" bitfld.long 0x00 0.--1. "SDIOCLKSEL,SDIO Reference Clock Select" "0: HFRCO clock is used to clock SDIO,1: HFXO clock is used to clock SDIO,2: AUXHFRCO is used to clock SDIO,3: USHFRCO is used to clock SDIO" endif sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0x164++0x03 line.long 0x00 "QSPICTRL,QSPI Control Register" bitfld.long 0x00 7. "QSPI0CLKDIS,QSPI0 Reference Clock Disable" "0,1" bitfld.long 0x00 0.--1. "QSPI0CLKSEL,QSPI0 Reference Clock Select" "0: HFRCO clock is used to clock QSPI0,1: HFXO clock is used to clock QSPI0,2: AUXHFRCO is used to clock QSPI0,3: USHFRCO is used to clock QSPI0" endif group.long 0x168++0x03 line.long 0x00 "PDMCTRL,PDM Control Register" bitfld.long 0x00 7. "PDMCLKEN,PDM Core Clock Enable" "0,1" bitfld.long 0x00 0.--1. "PDMCLKSEL,PDM Core Clock Select" "0: HFRCO clock is used to clock PDM,1: HFXO clock is used to clock PDM,2: USHFRCO is used to clock PDM,3: CLKIN0 is selected as HFCLK clock source" group.long 0x170++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 28. "CLKIN0PEN,CLKIN0 Pin Enable" "0,1" bitfld.long 0x00 2. "CLKOUT2PEN,CLKOUT2 Pin Enable" "0,1" newline bitfld.long 0x00 1. "CLKOUT1PEN,CLKOUT1 Pin Enable" "0,1" bitfld.long 0x00 0. "CLKOUT0PEN,CLKOUT0 Pin Enable" "0,1" group.long 0x174++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 16.--21. "CLKOUT2LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." bitfld.long 0x00 8.--13. "CLKOUT1LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." newline bitfld.long 0x00 0.--5. "CLKOUT0LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." group.long 0x178++0x03 line.long 0x00 "ROUTELOC1,I/O Routing Location Register" bitfld.long 0x00 0.--5. "CLKIN0LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." group.long 0x180++0x03 line.long 0x00 "LOCK,Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,Configuration Lock Key" group.long 0x184++0x03 line.long 0x00 "HFRCOSS,HFRCO Spread Spectrum Register" bitfld.long 0x00 8.--12. "SSINV,Spread Spectrum Update Interval" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--2. "SSAMP,Spread Spectrum Amplitude" "0,1,2,3,4,5,6,7" sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0x1F0++0x03 line.long 0x00 "USBCTRL,USB Control Register" bitfld.long 0x00 7. "USBCLKEN,USB Rate Clock Enable" "0,1" bitfld.long 0x00 0.--2. "USBCLKSEL,USB Rate Clock Select" "0: USHFRCO (clock recovery) is clocking USB,1: HFXO clock is used to clock USB,2: HFXO clock doubler is used to clock USB,3: HFRCO clock is used to clock USB,4: LFXO clock is used to clock USB,5: LFRCO clock is used to clock USB,?..." group.long 0x1F4++0x03 line.long 0x00 "USBCRCTRL,USB Clock Recovery Control" bitfld.long 0x00 1. "USBLSCRMD,Low Speed Clock Recovery Mode" "0,1" bitfld.long 0x00 0. "USBCREN,Clock Recovery Enable" "0,1" endif tree.end tree "CRYOTIMER" base ad:0x4008F000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 5.--7. "PRESC,Prescaler Setting" "0: LF Oscillator frequency undivided,1: LF Oscillator frequency divided by 2,2: LF Oscillator frequency divided by 4,3: LF Oscillator frequency divided by 8,4: LF Oscillator frequency divided by 16,5: LF Oscillator frequency divided by 32,6: LF Oscillator frequency divided by 64,7: LF Oscillator frequency divided by 128" bitfld.long 0x00 2.--3. "OSCSEL,Select Low Frequency Oscillator" "0: Output is driven low,1: Select Low Frequency RC Oscillator,2: Select Low Frequency Crystal Oscillator,3: Select Ultra Low Frequency RC Oscillator" newline bitfld.long 0x00 1. "DEBUGRUN,Debug Mode Run Enable" "0,1" bitfld.long 0x00 0. "EN,Enable CRYOTIMER" "0,1" group.long 0x04++0x03 line.long 0x00 "PERIODSEL,Interrupt Duration" bitfld.long 0x00 0.--5. "PERIODSEL,Interrupts/Wakeup Events Period Setting" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x08++0x03 line.long 0x00 "CNT,Counter Value" hexmask.long 0x00 0.--31. 1. "CNT,Counter Value" group.long 0x0C++0x03 line.long 0x00 "EM4WUEN,Wake Up Enable" bitfld.long 0x00 0. "EM4WU,EM4 Wake-up Enable" "0,1" rgroup.long 0x10++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 0. "PERIOD,Wakeup Event/Interrupt" "0,1" wgroup.long 0x14++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 0. "PERIOD,Set PERIOD Interrupt Flag" "0,1" wgroup.long 0x18++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 0. "PERIOD,Clear PERIOD Interrupt Flag" "0,1" group.long 0x1C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 0. "PERIOD,PERIOD Interrupt Enable" "0,1" tree.end tree "CRYPTO0" base ad:0x400F0000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 31. "COMBDMA0WEREQ,Combined Data0 Write DMA Request" "0,1" bitfld.long 0x00 28.--29. "DMA1RSEL,DATA0 DMA Unaligned Read Register Select" "0: UNKN_DESC,1: UNKN_DESC,2: UNKN_DESC,3: QDATA1BIG" newline bitfld.long 0x00 24.--25. "DMA1MODE,DMA1 Read Mode" "0: Target register is fully read/written during..,1: Length Limited,2: Target register is fully read/written during..,3: Length Limited" bitfld.long 0x00 20.--21. "DMA0RSEL,DMA0 Read Register Select" "0: UNKN_DESC,1: UNKN_DESC,2: DDATA0BIG,3: UNKN_DESC" newline bitfld.long 0x00 16.--17. "DMA0MODE,DMA0 Read Mode" "0: Target register is fully read/written during..,1: Length Limited,2: Target register is fully read/written during..,3: Length Limited" bitfld.long 0x00 14.--15. "INCWIDTH,Increment Width" "0: Byte 15 in DATA1 is used for the increment..,1: Bytes 14 and 15 in DATA1 are used for the..,2: Bytes 13 to 15 in DATA1 are used for the..,3: Bytes 12 to 15 in DATA1 are used for the.." newline bitfld.long 0x00 10. "NOBUSYSTALL,No Stalling of Bus When Busy" "0,1" bitfld.long 0x00 2. "SHA,SHA Mode" "0,1" newline bitfld.long 0x00 1. "KEYBUFDIS,Key Buffer Disable" "0,1" bitfld.long 0x00 0. "AES,AES Mode" "0,1" group.long 0x04++0x03 line.long 0x00 "WAC,Wide Arithmetic Configuration" bitfld.long 0x00 10.--11. "RESULTWIDTH,Result Width" "0: Results have 256 bits,1: Results have 128 bits,2: Results have 260 bits,?..." bitfld.long 0x00 8.--9. "MULWIDTH,Multiply Width" "0: Multiply 256 bits,1: Multiply 128 bits,2: Same number of bits as specified by MODULUS,?..." newline bitfld.long 0x00 4. "MODOP,Modular Operation Field Type" "0,1" bitfld.long 0x00 0.--3. "MODULUS,Modular Operation Modulus" "0: Generic modulus,1: Generic modulus,2: Modulus for B-233 and K-233 ECC curves,3: Modulus for B-163 and K-163 ECC curves,4: Modulus for GCM,5: Modulus for P-256 ECC curve,6: Modulus for P-224 ECC curve,7: Modulus for P-192 ECC curve,8: P modulus for B-233 ECC curve,9: P modulus for K-233 ECC curve,10: P modulus for B-163 ECC curve,11: P modulus for K-163 ECC curve,12: P modulus for P-256 ECC curve,13: P modulus for P-224 ECC curve,14: P modulus for P-192 ECC curve,?..." group.long 0x08++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 11. "SEQSTEP,Sequence Step" "0,1" bitfld.long 0x00 10. "SEQSTOP,Sequence Stop" "0,1" newline bitfld.long 0x00 9. "SEQSTART,Encryption/Decryption SEQUENCE Start" "0,1" hexmask.long.byte 0x00 0.--7. 1. "INSTR,Execute Instruction" rgroup.long 0x10++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 2. "DMAACTIVE,DMA Action is Active" "0,1" bitfld.long 0x00 1. "INSTRRUNNING,Action is Active" "0,1" newline bitfld.long 0x00 0. "SEQRUNNING,AES SEQUENCE Running" "0,1" rgroup.long 0x14++0x03 line.long 0x00 "DSTATUS,Data Status Register" bitfld.long 0x00 24. "CARRY,Carry From Arithmetic Operation" "0,1" bitfld.long 0x00 20. "DDATA1MSB,MSB in DDATA1" "0,1" newline bitfld.long 0x00 16.--19. "DDATA0MSBS,MSB in DDATA0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "DDATA0LSBS,LSBs in DDATA0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "DATA0ZERO,Data 0 Zero" "?,1: In DATA0 bits 0 to 31 are all zero,2: In DATA0 bits 32 to 63 are all zero,?,4: In DATA0 bits 64 to 95 are all zero,?,?,?,8: In DATA0 bits 96 to 127 are all zero,?..." rgroup.long 0x18++0x03 line.long 0x00 "CSTATUS,Control Status Register" bitfld.long 0x00 20.--24. "SEQIP,Sequence Next Instruction Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 17. "SEQSKIP,Sequence Skip Next Instruction" "0,1" newline bitfld.long 0x00 16. "SEQPART,Sequence Part" "0,1" bitfld.long 0x00 8.--10. "V1,Selected ALU Operand 1" "0: UNKN_DESC,1: UNKN_DESC,2: UNKN_DESC,3: UNKN_DESC,4: UNKN_DESC,5: UNKN_DESC,6: UNKN_DESC,7: UNKN_DESC" newline bitfld.long 0x00 0.--2. "V0,Selected ALU Operand 0" "0: UNKN_DESC,1: UNKN_DESC,2: UNKN_DESC,3: UNKN_DESC,4: UNKN_DESC,5: UNKN_DESC,6: UNKN_DESC,7: UNKN_DESC" group.long 0x20++0x03 line.long 0x00 "KEY,KEY Register Access" hexmask.long 0x00 0.--31. 1. "KEY,Key Access" group.long 0x24++0x03 line.long 0x00 "KEYBUF,KEY Buffer Register Access" hexmask.long 0x00 0.--31. 1. "KEYBUF,Key Buffer Access" group.long 0x30++0x03 line.long 0x00 "SEQCTRL,Sequence Control" bitfld.long 0x00 31. "HALT,Halt Sequence" "0,1" bitfld.long 0x00 29. "DMA1PRESA,DMA1 Preserve a" "0,1" newline bitfld.long 0x00 28. "DMA0PRESA,DMA0 Preserve a" "0,1" bitfld.long 0x00 26.--27. "DMA1SKIP,DMA1 Skip" "0,1,2,3" newline bitfld.long 0x00 24.--25. "DMA0SKIP,DMA0 Skip" "0,1,2,3" bitfld.long 0x00 20.--21. "BLOCKSIZE,Size of Data Blocks" "0: A block is 16 bytes long,1: A block is 32 bytes long,2: A block is 64 bytes long,?..." newline hexmask.long.word 0x00 0.--13. 1. "LENGTHA,Buffer Length a in Bytes" group.long 0x34++0x03 line.long 0x00 "SEQCTRLB,Sequence Control B" bitfld.long 0x00 29. "DMA1PRESB,DMA1 Preserve B" "0,1" bitfld.long 0x00 28. "DMA0PRESB,DMA0 Preserve B" "0,1" newline hexmask.long.word 0x00 0.--13. 1. "LENGTHB,Buffer Length B in Bytes" rgroup.long 0x40++0x03 line.long 0x00 "IF,AES Interrupt Flags" bitfld.long 0x00 1. "SEQDONE,Sequence Done" "0,1" bitfld.long 0x00 0. "INSTRDONE,Instruction Done" "0,1" wgroup.long 0x44++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 1. "SEQDONE,Set SEQDONE Interrupt Flag" "0,1" bitfld.long 0x00 0. "INSTRDONE,Set INSTRDONE Interrupt Flag" "0,1" wgroup.long 0x48++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 1. "SEQDONE,Clear SEQDONE Interrupt Flag" "0,1" bitfld.long 0x00 0. "INSTRDONE,Clear INSTRDONE Interrupt Flag" "0,1" group.long 0x4C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 1. "SEQDONE,SEQDONE Interrupt Enable" "0,1" bitfld.long 0x00 0. "INSTRDONE,INSTRDONE Interrupt Enable" "0,1" group.long 0x50++0x03 line.long 0x00 "SEQ0,Sequence Register 0" hexmask.long.byte 0x00 24.--31. 1. "INSTR3,Sequence Instruction 3" hexmask.long.byte 0x00 16.--23. 1. "INSTR2,Sequence Instruction 2" newline hexmask.long.byte 0x00 8.--15. 1. "INSTR1,Sequence Instruction 1" hexmask.long.byte 0x00 0.--7. 1. "INSTR0,Sequence Instruction 0" group.long 0x54++0x03 line.long 0x00 "SEQ1,Sequence Register 1" hexmask.long.byte 0x00 24.--31. 1. "INSTR7,Sequence Instruction 7" hexmask.long.byte 0x00 16.--23. 1. "INSTR6,Sequence Instruction 6" newline hexmask.long.byte 0x00 8.--15. 1. "INSTR5,Sequence Instruction 5" hexmask.long.byte 0x00 0.--7. 1. "INSTR4,Sequence Instruction 4" group.long 0x58++0x03 line.long 0x00 "SEQ2,Sequence Register 2" hexmask.long.byte 0x00 24.--31. 1. "INSTR11,Sequence Instruction 11" hexmask.long.byte 0x00 16.--23. 1. "INSTR10,Sequence Instruction 10" newline hexmask.long.byte 0x00 8.--15. 1. "INSTR9,Sequence Instruction 9" hexmask.long.byte 0x00 0.--7. 1. "INSTR8,Sequence Instruction 8" group.long 0x5C++0x03 line.long 0x00 "SEQ3,Sequence Register 3" hexmask.long.byte 0x00 24.--31. 1. "INSTR15,Sequence Instruction 15" hexmask.long.byte 0x00 16.--23. 1. "INSTR14,Sequence Instruction 14" newline hexmask.long.byte 0x00 8.--15. 1. "INSTR13,Sequence Instruction 13" hexmask.long.byte 0x00 0.--7. 1. "INSTR12,Sequence Instruction 12" group.long 0x60++0x03 line.long 0x00 "SEQ4,Sequence Register 4" hexmask.long.byte 0x00 24.--31. 1. "INSTR19,Sequence Instruction 19" hexmask.long.byte 0x00 16.--23. 1. "INSTR18,Sequence Instruction 18" newline hexmask.long.byte 0x00 8.--15. 1. "INSTR17,Sequence Instruction 17" hexmask.long.byte 0x00 0.--7. 1. "INSTR16,Sequence Instruction 16" group.long 0x80++0x03 line.long 0x00 "DATA0,DATA0 Register Access" hexmask.long 0x00 0.--31. 1. "DATA0,Data 0 Access" group.long 0x84++0x03 line.long 0x00 "DATA1,DATA1 Register Access" hexmask.long 0x00 0.--31. 1. "DATA1,Data 1 Access" group.long 0x88++0x03 line.long 0x00 "DATA2,DATA2 Register Access" hexmask.long 0x00 0.--31. 1. "DATA2,Data 2 Access" group.long 0x8C++0x03 line.long 0x00 "DATA3,DATA3 Register Access" hexmask.long 0x00 0.--31. 1. "DATA3,Data 3 Access" group.long 0xA0++0x03 line.long 0x00 "DATA0XOR,DATA0XOR Register Access" hexmask.long 0x00 0.--31. 1. "DATA0XOR,XOR Data 0 Access" group.long 0xB0++0x03 line.long 0x00 "DATA0BYTE,DATA0 Register Byte Access" hexmask.long.byte 0x00 0.--7. 1. "DATA0BYTE,Data 0 Byte Access" group.long 0xB4++0x03 line.long 0x00 "DATA1BYTE,DATA1 Register Byte Access" hexmask.long.byte 0x00 0.--7. 1. "DATA1BYTE,Data 1 Byte Access" group.long 0xBC++0x03 line.long 0x00 "DATA0XORBYTE,DATA0 Register Byte XOR Access" hexmask.long.byte 0x00 0.--7. 1. "DATA0XORBYTE,Data 0 XOR Byte Access" group.long 0xC0++0x03 line.long 0x00 "DATA0BYTE12,DATA0 Register Byte 12 Access" hexmask.long.byte 0x00 0.--7. 1. "DATA0BYTE12,Data 0 Byte 12 Access" group.long 0xC4++0x03 line.long 0x00 "DATA0BYTE13,DATA0 Register Byte 13 Access" hexmask.long.byte 0x00 0.--7. 1. "DATA0BYTE13,Data 0 Byte 13 Access" group.long 0xC8++0x03 line.long 0x00 "DATA0BYTE14,DATA0 Register Byte 14 Access" hexmask.long.byte 0x00 0.--7. 1. "DATA0BYTE14,Data 0 Byte 14 Access" group.long 0xCC++0x03 line.long 0x00 "DATA0BYTE15,DATA0 Register Byte 15 Access" hexmask.long.byte 0x00 0.--7. 1. "DATA0BYTE15,Data 0 Byte 15 Access" group.long 0x100++0x03 line.long 0x00 "DDATA0,DDATA0 Register Access" hexmask.long 0x00 0.--31. 1. "DDATA0,Double Data 0 Access" group.long 0x104++0x03 line.long 0x00 "DDATA1,DDATA1 Register Access" hexmask.long 0x00 0.--31. 1. "DDATA1,Double Data 0 Access" group.long 0x108++0x03 line.long 0x00 "DDATA2,DDATA2 Register Access" hexmask.long 0x00 0.--31. 1. "DDATA2,Double Data 0 Access" group.long 0x10C++0x03 line.long 0x00 "DDATA3,DDATA3 Register Access" hexmask.long 0x00 0.--31. 1. "DDATA3,Double Data 0 Access" group.long 0x110++0x03 line.long 0x00 "DDATA4,DDATA4 Register Access" hexmask.long 0x00 0.--31. 1. "DDATA4,Double Data 0 Access" group.long 0x130++0x03 line.long 0x00 "DDATA0BIG,DDATA0 Register Big Endian Access" hexmask.long 0x00 0.--31. 1. "DDATA0BIG,Double Data 0 Big Endian Access" group.long 0x140++0x03 line.long 0x00 "DDATA0BYTE,DDATA0 Register Byte Access" hexmask.long.byte 0x00 0.--7. 1. "DDATA0BYTE,Ddata 0 Byte Access" group.long 0x144++0x03 line.long 0x00 "DDATA1BYTE,DDATA1 Register Byte Access" hexmask.long.byte 0x00 0.--7. 1. "DDATA1BYTE,Ddata 1 Byte Access" group.long 0x148++0x03 line.long 0x00 "DDATA0BYTE32,DDATA0 Register Byte 32 Access" bitfld.long 0x00 0.--3. "DDATA0BYTE32,Ddata 0 Byte 32 Access" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x180++0x03 line.long 0x00 "QDATA0,QDATA0 Register Access" hexmask.long 0x00 0.--31. 1. "QDATA0,Quad Data 0 Access" group.long 0x184++0x03 line.long 0x00 "QDATA1,QDATA1 Register Access" hexmask.long 0x00 0.--31. 1. "QDATA1,Quad Data 1 Access" group.long 0x1A4++0x03 line.long 0x00 "QDATA1BIG,QDATA1 Register Big Endian Access" hexmask.long 0x00 0.--31. 1. "QDATA1BIG,Quad Data 1 Big Endian Access" group.long 0x1C0++0x03 line.long 0x00 "QDATA0BYTE,QDATA0 Register Byte Access" hexmask.long.byte 0x00 0.--7. 1. "QDATA0BYTE,Qdata 0 Byte Access" group.long 0x1C4++0x03 line.long 0x00 "QDATA1BYTE,QDATA1 Register Byte Access" hexmask.long.byte 0x00 0.--7. 1. "QDATA1BYTE,Qdata 1 Byte Access" tree.end tree "CSEN" base ad:0x4008E000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control" bitfld.long 0x00 28. "CPACCURACY,Charge Pump Accuracy" "0,1" bitfld.long 0x00 27. "LOCALSENS,Local Sensing Enable" "0,1" newline bitfld.long 0x00 26. "WARMUPMODE,Select Warmup Mode for CSEN" "0,1" bitfld.long 0x00 25. "EMACMPEN,Greater and Less Than Comparison Using the Exponential Moving Average (EMA) is Enabled" "0,1" newline bitfld.long 0x00 24. "MXUC,CSEN Mux Disconnect" "0,1" bitfld.long 0x00 23. "AUTOGND,CSEN Automatic Ground Enable" "0,1" newline bitfld.long 0x00 22. "CHOPEN,CSEN Chop Enable" "0,1" bitfld.long 0x00 21. "CONVSEL,CSEN Converter Select" "0,1" newline bitfld.long 0x00 20. "DMAEN,CSEN DMA Enable Bit" "0,1" bitfld.long 0x00 19. "DRSF,CSEN Disable Right-Shift" "0,1" newline bitfld.long 0x00 18. "CMPEN,CSEN Digital Comparator Enable" "0,1" bitfld.long 0x00 16.--17. "STM,Start Trigger Select" "0: PRS Triggering,1: Timer Triggering,2: Software Triggering,?..." newline bitfld.long 0x00 15. "MCEN,CSEN Multiple Channel Enable" "0,1" bitfld.long 0x00 12.--14. "ACU,CSEN Accumulator Mode Select" "0: Accumulate 1 sample,1: Accumulate 2 sample,2: Accumulate 4 sample,3: Accumulate 8 sample,4: Accumulate 16 sample,5: Accumulate 32 sample,6: Accumulate 64 sample,?..." newline bitfld.long 0x00 8.--9. "SARCR,SAR Conversion Resolution" "0: Conversions last 10 internal CSEN clocks and..,1: Conversions last 12 internal CSEN clocks and..,2: Conversions last 14 internal CSEN clocks and..,3: Conversions last 16 internal CSEN clocks and.." bitfld.long 0x00 4.--5. "CM,CSEN Conversion Mode Select" "0: Single Channel Mode,1: Scan Mode,2: Continuous Single Channel,3: Continuous Scan Mode" newline bitfld.long 0x00 2. "CMPPOL,CSEN Digital Comparator Polarity Select" "0,1" bitfld.long 0x00 1. "EN,CSEN Enable" "0,1" group.long 0x04++0x03 line.long 0x00 "TIMCTRL,Timing Control" bitfld.long 0x00 16.--17. "WARMUPCNT,Warmup Period Counter" "0,1,2,3" hexmask.long.byte 0x00 8.--15. 1. "PCTOP,Period Counter Top Value" newline bitfld.long 0x00 0.--2. "PCPRESC,Period Counter Prescaler" "0: The period counter clock frequency is..,1: The period counter clock frequency is..,2: The period counter clock frequency is..,3: The period counter clock frequency is..,4: The period counter clock frequency is..,5: The period counter clock frequency is..,6: The period counter clock frequency is..,7: The period counter clock frequency is.." wgroup.long 0x08++0x03 line.long 0x00 "CMD,Command" bitfld.long 0x00 0. "START,Start Software-Triggered Conversions" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "STATUS,Status" bitfld.long 0x00 0. "CSENBUSY,Busy Flag" "0,1" group.long 0x10++0x03 line.long 0x00 "PRSSEL,PRS Select" bitfld.long 0x00 0.--3. "PRSSEL,PRS Channel Select" "0: PRS Channel 0 selected as the start trigger,1: PRS Channel 1 selected as the start trigger,2: PRS Channel 2 selected as the start trigger,3: PRS Channel 3 selected as the start trigger,4: PRS Channel 4 selected as the start trigger,5: PRS Channel 5 selected as the start trigger,6: PRS Channel 6 selected as the start trigger,7: PRS Channel 7 selected as the start trigger,8: PRS Channel 8 selected as the start trigger,9: PRS Channel 9 selected as the start trigger,10: PRS Channel 10 selected as the start trigger,11: PRS Channel 11 selected as the start trigger,12: PRS Channel 12 selected as the start trigger,13: PRS Channel 13 selected as the start trigger,14: PRS Channel 14 selected as the start trigger,15: PRS Channel 15 selected as the start trigger" group.long 0x14++0x03 line.long 0x00 "DATA,Output Data" hexmask.long 0x00 0.--31. 1. "DATA,Output Data" group.long 0x18++0x03 line.long 0x00 "SCANMASK0,Scan Channel Mask 0" hexmask.long 0x00 0.--31. 1. "SCANINPUTEN,Scan Channel Mask" group.long 0x1C++0x03 line.long 0x00 "SCANINPUTSEL0,Scan Input Selection 0" bitfld.long 0x00 24.--27. "INPUT24TO31SEL,CSEN_INPUT24-31 Select" "?,?,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,?,?,?,?,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31" bitfld.long 0x00 16.--19. "INPUT16TO23SEL,CSEN_INPUT16-23 Select" "?,?,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,?,?,?,?,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31" newline bitfld.long 0x00 8.--11. "INPUT8TO15SEL,CSEN_INPUT8-15 Select" "?,?,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,?,?,?,?,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31" bitfld.long 0x00 0.--3. "INPUT0TO7SEL,CSEN_INPUT0-7 Select" "?,?,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,?,?,?,?,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31" group.long 0x20++0x03 line.long 0x00 "SCANMASK1,Scan Channel Mask 1" hexmask.long 0x00 0.--31. 1. "SCANINPUTEN,Scan Channel Mask" group.long 0x24++0x03 line.long 0x00 "SCANINPUTSEL1,Scan Input Selection 1" bitfld.long 0x00 24.--27. "INPUT56TO63SEL,CSEN_INPUT56-63 Select" "?,?,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,?,?,?,?,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31" bitfld.long 0x00 16.--19. "INPUT48TO55SEL,CSEN_INPUT48-55 Select" "?,?,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,?,?,?,?,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31" newline bitfld.long 0x00 8.--11. "INPUT40TO47SEL,CSEN_INPUT40-47 Select" "?,?,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,?,?,?,?,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31" bitfld.long 0x00 0.--3. "INPUT32TO39SEL,CSEN_INPUT32-39 Select" "?,?,?,?,4: APORT1CH0TO7,5: APORT1CH8TO15,6: APORT1CH16TO23,7: APORT1CH24TO31,?,?,?,?,12: APORT3CH0TO7,13: APORT3CH8TO15,14: APORT3CH16TO23,15: APORT3CH24TO31" rgroup.long 0x28++0x03 line.long 0x00 "APORTREQ,APORT Request Status" bitfld.long 0x00 9. "APORT4YREQ,1 If the Bus Connected to APORT4Y is Requested" "0,1" bitfld.long 0x00 8. "APORT4XREQ,1 If the Bus Connected to APORT4X is Requested" "0,1" newline bitfld.long 0x00 7. "APORT3YREQ,1 If the Bus Connected to APORT3Y is Requested" "0,1" bitfld.long 0x00 6. "APORT3XREQ,1 If the Bus Connected to APORT3X is Requested" "0,1" newline bitfld.long 0x00 5. "APORT2YREQ,1 If the Bus Connected to APORT2Y is Requested" "0,1" bitfld.long 0x00 4. "APORT2XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" newline bitfld.long 0x00 3. "APORT1YREQ,1 If the Bus Connected to APORT1X is Requested" "0,1" bitfld.long 0x00 2. "APORT1XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" rgroup.long 0x2C++0x03 line.long 0x00 "APORTCONFLICT,APORT Request Conflict" bitfld.long 0x00 9. "APORT4YCONFLICT,1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 8. "APORT4XCONFLICT,1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 7. "APORT3YCONFLICT,1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 6. "APORT3XCONFLICT,1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 5. "APORT2YCONFLICT,1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 4. "APORT2XCONFLICT,1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 3. "APORT1YCONFLICT,1 If the Bus Connected to APORT1Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 2. "APORT1XCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" group.long 0x30++0x03 line.long 0x00 "CMPTHR,Comparator Threshold" hexmask.long.word 0x00 0.--15. 1. "CMPTHR,Comparator Threshold" group.long 0x34++0x03 line.long 0x00 "EMA,Exponential Moving Average" hexmask.long.tbyte 0x00 0.--21. 1. "EMA,Calculated Exponential Moving Average" group.long 0x38++0x03 line.long 0x00 "EMACTRL,Exponential Moving Average Control" bitfld.long 0x00 0.--2. "EMASAMPLE,EMA Sample Weight" "0: EMA weight (N) is 1,1: EMA weight (N) is 2,2: EMA weight (N) is 4,3: EMA weight (N) is 8,4: EMA weight (N) is 16,5: EMA weight (N) is 32,6: EMA weight (N) is 64,?..." group.long 0x3C++0x03 line.long 0x00 "SINGLECTRL,Single Conversion Control" hexmask.long.byte 0x00 4.--10. 1. "SINGLESEL,Single Channel Input Select" group.long 0x40++0x03 line.long 0x00 "DMBASELINE,Delta Modulation Baseline" hexmask.long.word 0x00 16.--31. 1. "BASELINEDN,Delta Modulator Integrator Initial Value" hexmask.long.word 0x00 0.--15. 1. "BASELINEUP,Delta Modulator Integrator Initial Value" group.long 0x44++0x03 line.long 0x00 "DMCFG,Delta Modulation Configuration" bitfld.long 0x00 28. "DMGRDIS,Delta Modulation Gain Step Reduction Disable" "0,1" bitfld.long 0x00 20.--21. "CRMODE,Delta Modulator Conversion Resolution" "0: 10-bit delta modulator,1: 12-bit delta modulator,2: 14-bit delta modulator,3: 16-bit delta modulator" newline bitfld.long 0x00 16.--19. "DMCR,Delta Modulator Conversion Rate" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "DMR,Delta Modulator Gain Reduction Interval" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 0.--7. 1. "DMG,Delta Modulator Gain Step" group.long 0x48++0x03 line.long 0x00 "ANACTRL,Analog Control" bitfld.long 0x00 20.--22. "TRSTPROG,Reset Timing" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. "IDACIREFS,Current DAC and Reference Current Scale" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 4.--6. "IREFPROG,Reference Current Control" "0,1,2,3,4,5,6,7" rgroup.long 0x54++0x03 line.long 0x00 "IF,Interrupt Flag" bitfld.long 0x00 4. "APORTCONFLICT,APORT Conflict Interrupt Flag" "0,1" bitfld.long 0x00 3. "DMAOF,DMA Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "EOS,End of Scan Interrupt Flag" "0,1" bitfld.long 0x00 1. "CONV,Conversion Done Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CMP,Digital Comparator Interrupt Flag" "0,1" wgroup.long 0x58++0x03 line.long 0x00 "IFS,Interrupt Flag Set" bitfld.long 0x00 4. "APORTCONFLICT,Set APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 3. "DMAOF,Set DMAOF Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "EOS,Set EOS Interrupt Flag" "0,1" bitfld.long 0x00 1. "CONV,Set CONV Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CMP,Set CMP Interrupt Flag" "0,1" wgroup.long 0x5C++0x03 line.long 0x00 "IFC,Interrupt Flag Clear" bitfld.long 0x00 4. "APORTCONFLICT,Clear APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 3. "DMAOF,Clear DMAOF Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "EOS,Clear EOS Interrupt Flag" "0,1" bitfld.long 0x00 1. "CONV,Clear CONV Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CMP,Clear CMP Interrupt Flag" "0,1" group.long 0x60++0x03 line.long 0x00 "IEN,Interrupt Enable" bitfld.long 0x00 4. "APORTCONFLICT,APORTCONFLICT Interrupt Enable" "0,1" bitfld.long 0x00 3. "DMAOF,DMAOF Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "EOS,EOS Interrupt Enable" "0,1" bitfld.long 0x00 1. "CONV,CONV Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "CMP,CMP Interrupt Enable" "0,1" tree.end tree "EBI" base ad:0x4000B000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 31. "ALTMAP,Alternative Address Map Enable" "0,1" bitfld.long 0x00 30. "ITS,Individual Timing Set Line Polarity and Mode Definition Enable" "0,1" newline bitfld.long 0x00 27. "BL3,Byte Lane Enable for Bank 3" "0,1" bitfld.long 0x00 26. "BL2,Byte Lane Enable for Bank 2" "0,1" newline bitfld.long 0x00 25. "BL1,Byte Lane Enable for Bank 1" "0,1" bitfld.long 0x00 24. "BL,Byte Lane Enable for Bank 0" "0,1" newline bitfld.long 0x00 23. "ARDYTO3DIS,ARDY Timeout Disable for Bank 3" "0,1" bitfld.long 0x00 22. "ARDY3EN,ARDY Enable for Bank 3" "0,1" newline bitfld.long 0x00 21. "ARDYTO2DIS,ARDY Timeout Disable for Bank 2" "0,1" bitfld.long 0x00 20. "ARDY2EN,ARDY Enable for Bank 2" "0,1" newline bitfld.long 0x00 19. "ARDYTO1DIS,ARDY Timeout Disable for Bank 1" "0,1" bitfld.long 0x00 18. "ARDY1EN,ARDY Enable for Bank 1" "0,1" newline bitfld.long 0x00 17. "ARDYTODIS,ARDY Timeout Disable" "0,1" bitfld.long 0x00 16. "ARDYEN,ARDY Enable" "0,1" newline bitfld.long 0x00 15. "NOIDLE3,No Idle Cycle Insertion on Bank 3" "0,1" bitfld.long 0x00 14. "NOIDLE2,No Idle Cycle Insertion on Bank 2" "0,1" newline bitfld.long 0x00 13. "NOIDLE1,No Idle Cycle Insertion on Bank 1" "0,1" bitfld.long 0x00 12. "NOIDLE,No Idle Cycle Insertion on Bank 0" "0,1" newline bitfld.long 0x00 11. "BANK3EN,Bank 3 Enable" "0,1" bitfld.long 0x00 10. "BANK2EN,Bank 2 Enable" "0,1" newline bitfld.long 0x00 9. "BANK1EN,Bank 1 Enable" "0,1" bitfld.long 0x00 8. "BANK0EN,Bank 0 Enable" "0,1" newline bitfld.long 0x00 6.--7. "MODE3,Mode 3" "0: EBI_AD drives 8 bit data 8 bit address ALE..,1: EBI_AD drives 16 bit data 16 bit address ALE..,2: EBI_AD drives 8 bit data 24 bit address ALE..,3: EBI_AD drives 16 bit data ALE not used" bitfld.long 0x00 4.--5. "MODE2,Mode 2" "0: EBI_AD drives 8 bit data 8 bit address ALE..,1: EBI_AD drives 16 bit data 16 bit address ALE..,2: EBI_AD drives 8 bit data 24 bit address ALE..,3: EBI_AD drives 16 bit data ALE not used" newline bitfld.long 0x00 2.--3. "MODE1,Mode 1" "0: EBI_AD drives 8 bit data 8 bit address ALE..,1: EBI_AD drives 16 bit data 16 bit address ALE..,2: EBI_AD drives 8 bit data 24 bit address ALE..,3: EBI_AD drives 16 bit data ALE not used" bitfld.long 0x00 0.--1. "MODE,Mode" "0: EBI_AD drives 8 bit data 8 bit address ALE..,1: EBI_AD drives 16 bit data 16 bit address ALE..,2: EBI_AD drives 8 bit data 24 bit address ALE..,3: EBI_AD drives 16 bit data ALE not used" group.long 0x04++0x03 line.long 0x00 "ADDRTIMING,Address Timing Register" bitfld.long 0x00 28. "HALFALE,Half Cycle ALE Strobe Duration Enable" "0,1" bitfld.long 0x00 8.--10. "ADDRHOLD,Address Hold Time" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "ADDRSETUP,Address Setup Time" "0,1,2,3,4,5,6,7" group.long 0x08++0x03 line.long 0x00 "RDTIMING,Read Timing Register" bitfld.long 0x00 30. "PAGEMODE,Page Mode Access Enable" "0,1" bitfld.long 0x00 29. "PREFETCH,Prefetch Enable" "0,1" newline bitfld.long 0x00 28. "HALFRE,Half Cycle REn Strobe Duration Enable" "0,1" bitfld.long 0x00 16.--18. "RDHOLD,Read Hold Time" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 8.--14. 1. "RDSTRB,Read Strobe Time" bitfld.long 0x00 0.--2. "RDSETUP,Read Setup Time" "0,1,2,3,4,5,6,7" group.long 0x0C++0x03 line.long 0x00 "WRTIMING,Write Timing Register" bitfld.long 0x00 29. "WBUFDIS,Write Buffer Disable" "0,1" bitfld.long 0x00 28. "HALFWE,Half Cycle WEn Strobe Duration Enable" "0,1" newline bitfld.long 0x00 16.--18. "WRHOLD,Write Hold Time" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 8.--14. 1. "WRSTRB,Write Strobe Time" newline bitfld.long 0x00 0.--2. "WRSETUP,Write Setup Time" "0,1,2,3,4,5,6,7" group.long 0x10++0x03 line.long 0x00 "POLARITY,Polarity Register" bitfld.long 0x00 5. "BLPOL,BL Polarity" "0,1" bitfld.long 0x00 4. "ARDYPOL,ARDY Polarity" "0,1" newline bitfld.long 0x00 3. "ALEPOL,Address Latch Polarity" "0,1" bitfld.long 0x00 2. "WEPOL,Write Enable Polarity" "0,1" newline bitfld.long 0x00 1. "REPOL,Read Enable Polarity" "0,1" bitfld.long 0x00 0. "CSPOL,Chip Select Polarity" "0,1" group.long 0x18++0x03 line.long 0x00 "ADDRTIMING1,Address Timing Register 1" bitfld.long 0x00 28. "HALFALE,Half Cycle ALE Strobe Duration Enable" "0,1" bitfld.long 0x00 8.--10. "ADDRHOLD,Address Hold Time" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "ADDRSETUP,Address Setup Time" "0,1,2,3,4,5,6,7" group.long 0x1C++0x03 line.long 0x00 "RDTIMING1,Read Timing Register 1" bitfld.long 0x00 30. "PAGEMODE,Page Mode Access Enable" "0,1" bitfld.long 0x00 29. "PREFETCH,Prefetch Enable" "0,1" newline bitfld.long 0x00 28. "HALFRE,Half Cycle REn Strobe Duration Enable" "0,1" bitfld.long 0x00 16.--18. "RDHOLD,Read Hold Time" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 8.--14. 1. "RDSTRB,Read Strobe Time" bitfld.long 0x00 0.--2. "RDSETUP,Read Setup Time" "0,1,2,3,4,5,6,7" group.long 0x20++0x03 line.long 0x00 "WRTIMING1,Write Timing Register 1" bitfld.long 0x00 29. "WBUFDIS,Write Buffer Disable" "0,1" bitfld.long 0x00 28. "HALFWE,Half Cycle WEn Strobe Duration Enable" "0,1" newline bitfld.long 0x00 16.--18. "WRHOLD,Write Hold Time" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 8.--14. 1. "WRSTRB,Write Strobe Time" newline bitfld.long 0x00 0.--2. "WRSETUP,Write Setup Time" "0,1,2,3,4,5,6,7" group.long 0x24++0x03 line.long 0x00 "POLARITY1,Polarity Register 1" bitfld.long 0x00 5. "BLPOL,BL Polarity" "0,1" bitfld.long 0x00 4. "ARDYPOL,ARDY Polarity" "0,1" newline bitfld.long 0x00 3. "ALEPOL,Address Latch Polarity" "0,1" bitfld.long 0x00 2. "WEPOL,Write Enable Polarity" "0,1" newline bitfld.long 0x00 1. "REPOL,Read Enable Polarity" "0,1" bitfld.long 0x00 0. "CSPOL,Chip Select Polarity" "0,1" group.long 0x28++0x03 line.long 0x00 "ADDRTIMING2,Address Timing Register 2" bitfld.long 0x00 28. "HALFALE,Half Cycle ALE Strobe Duration Enable" "0,1" bitfld.long 0x00 8.--10. "ADDRHOLD,Address Hold Time" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "ADDRSETUP,Address Setup Time" "0,1,2,3,4,5,6,7" group.long 0x2C++0x03 line.long 0x00 "RDTIMING2,Read Timing Register 2" bitfld.long 0x00 30. "PAGEMODE,Page Mode Access Enable" "0,1" bitfld.long 0x00 29. "PREFETCH,Prefetch Enable" "0,1" newline bitfld.long 0x00 28. "HALFRE,Half Cycle REn Strobe Duration Enable" "0,1" bitfld.long 0x00 16.--18. "RDHOLD,Read Hold Time" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 8.--14. 1. "RDSTRB,Read Strobe Time" bitfld.long 0x00 0.--2. "RDSETUP,Read Setup Time" "0,1,2,3,4,5,6,7" group.long 0x30++0x03 line.long 0x00 "WRTIMING2,Write Timing Register 2" bitfld.long 0x00 29. "WBUFDIS,Write Buffer Disable" "0,1" bitfld.long 0x00 28. "HALFWE,Half Cycle WEn Strobe Duration Enable" "0,1" newline bitfld.long 0x00 16.--18. "WRHOLD,Write Hold Time" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 8.--14. 1. "WRSTRB,Write Strobe Time" newline bitfld.long 0x00 0.--2. "WRSETUP,Write Setup Time" "0,1,2,3,4,5,6,7" group.long 0x34++0x03 line.long 0x00 "POLARITY2,Polarity Register 2" bitfld.long 0x00 5. "BLPOL,BL Polarity" "0,1" bitfld.long 0x00 4. "ARDYPOL,ARDY Polarity" "0,1" newline bitfld.long 0x00 3. "ALEPOL,Address Latch Polarity" "0,1" bitfld.long 0x00 2. "WEPOL,Write Enable Polarity" "0,1" newline bitfld.long 0x00 1. "REPOL,Read Enable Polarity" "0,1" bitfld.long 0x00 0. "CSPOL,Chip Select Polarity" "0,1" group.long 0x38++0x03 line.long 0x00 "ADDRTIMING3,Address Timing Register 3" bitfld.long 0x00 28. "HALFALE,Half Cycle ALE Strobe Duration Enable" "0,1" bitfld.long 0x00 8.--10. "ADDRHOLD,Address Hold Time" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--2. "ADDRSETUP,Address Setup Time" "0,1,2,3,4,5,6,7" group.long 0x3C++0x03 line.long 0x00 "RDTIMING3,Read Timing Register 3" bitfld.long 0x00 30. "PAGEMODE,Page Mode Access Enable" "0,1" bitfld.long 0x00 29. "PREFETCH,Prefetch Enable" "0,1" newline bitfld.long 0x00 28. "HALFRE,Half Cycle REn Strobe Duration Enable" "0,1" bitfld.long 0x00 16.--18. "RDHOLD,Read Hold Time" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 8.--14. 1. "RDSTRB,Read Strobe Time" bitfld.long 0x00 0.--2. "RDSETUP,Read Setup Time" "0,1,2,3,4,5,6,7" group.long 0x40++0x03 line.long 0x00 "WRTIMING3,Write Timing Register 3" bitfld.long 0x00 29. "WBUFDIS,Write Buffer Disable" "0,1" bitfld.long 0x00 28. "HALFWE,Half Cycle WEn Strobe Duration Enable" "0,1" newline bitfld.long 0x00 16.--18. "WRHOLD,Write Hold Time" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 8.--14. 1. "WRSTRB,Write Strobe Time" newline bitfld.long 0x00 0.--2. "WRSETUP,Write Setup Time" "0,1,2,3,4,5,6,7" group.long 0x44++0x03 line.long 0x00 "POLARITY3,Polarity Register 3" bitfld.long 0x00 5. "BLPOL,BL Polarity" "0,1" bitfld.long 0x00 4. "ARDYPOL,ARDY Polarity" "0,1" newline bitfld.long 0x00 3. "ALEPOL,Address Latch Polarity" "0,1" bitfld.long 0x00 2. "WEPOL,Write Enable Polarity" "0,1" newline bitfld.long 0x00 1. "REPOL,Read Enable Polarity" "0,1" bitfld.long 0x00 0. "CSPOL,Chip Select Polarity" "0,1" group.long 0x48++0x03 line.long 0x00 "PAGECTRL,Page Control Register" hexmask.long.byte 0x00 20.--26. 1. "KEEPOPEN,Maximum Page Open Time" bitfld.long 0x00 8.--11. "RDPA,Page Read Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "INCHIT,Intrapage Hit Only on Incremental Addresses" "0,1" bitfld.long 0x00 0.--1. "PAGELEN,Page Length" "0: 4 members in a page,1: 8 members in a page,2: 16 members in a page,3: 32 members in a page" group.long 0x4C++0x03 line.long 0x00 "NANDCTRL,NAND Control Register" bitfld.long 0x00 4.--5. "BANKSEL,NAND Flash Bank" "0: Memory bank 0 is connected to a NAND Flash..,1: Memory bank 1 is connected to a NAND Flash..,2: Memory bank 2 is connected to a NAND Flash..,3: Memory bank 3 is connected to a NAND Flash.." bitfld.long 0x00 0. "EN,NAND Flash Control Enable" "0,1" wgroup.long 0x50++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 2. "ECCCLEAR,Error Correction Code Clear" "0,1" bitfld.long 0x00 1. "ECCSTOP,Error Correction Code Generation Stop" "0,1" newline bitfld.long 0x00 0. "ECCSTART,Error Correction Code Generation Start" "0,1" rgroup.long 0x54++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 13. "TFTDDEMPTY,EBI_TFTDD Register is Empty" "0,1" bitfld.long 0x00 12. "DDACT,EBI Busy With Direct Drive Transactions" "0,1" newline bitfld.long 0x00 10. "TFTPIXELFULL,EBI_TFTPIXEL0 is Full" "0,1" bitfld.long 0x00 9. "TFTPIXEL1EMPTY,EBI_TFTPIXEL1 is Empty" "0,1" newline bitfld.long 0x00 8. "TFTPIXEL0EMPTY,EBI_TFTPIXEL0 is Empty" "0,1" bitfld.long 0x00 4. "ECCACT,EBI ECC Generation Active" "0,1" newline bitfld.long 0x00 0. "AHBACT,EBI Busy With AHB Transaction" "0,1" rgroup.long 0x58++0x03 line.long 0x00 "ECCPARITY,ECC Parity Register" hexmask.long 0x00 0.--31. 1. "ECCPARITY,ECC Parity Data" group.long 0x5C++0x03 line.long 0x00 "TFTCTRL,TFT Control Register" bitfld.long 0x00 22.--23. "ALIASBANK,Graphic Bank Select Aliasing" "0: Graphic Bank Select is alias to Bank Select 0,1: Graphic Bank Select is alias to Bank Select 1,2: Graphic Bank Select is alias to Bank Select 2,3: Graphic Bank Select is alias to Bank Select 3" bitfld.long 0x00 20.--21. "BANKSEL,Graphics Bank" "0: Memory bank 0 is used for Direct Drive..,1: Memory bank 1 is used for Direct Drive..,2: Memory bank 2 is used for Direct Drive..,3: Memory bank 3 is used for Direct Drive.." newline bitfld.long 0x00 19. "ALIASBANKEN,Alias to Graphics Bank Enable" "0,1" bitfld.long 0x00 16.--17. "WIDTH,TFT Transaction Width" "0: TFT Data is 8 bit wide,1: TFT Data is 16 bit wide,?..." newline bitfld.long 0x00 12. "COLOR1SRC,Masking/Alpha Blending Color1 Source" "0,1" bitfld.long 0x00 10.--11. "INTERLEAVE,Interleave Mode" "0: Allow unlimited interleaved EBI accesses per..,1: Allow 1 interleaved EBI access per EBI_DCLK..,2: Only allow EBI accesses during TFT porches,?..." newline bitfld.long 0x00 9. "FBCTRIG,TFT Frame Base Copy Trigger" "0,1" bitfld.long 0x00 8. "SHIFTDCLKEN,TFT EBI_DCLK Shift Enable" "0,1" newline bitfld.long 0x00 2.--5. "MASKBLEND,TFT Mask and Blend Mode" "0: Masking and Blending are disabled,1: Internal Masking is enabled,2: Internal Alpha Blending is enabled,3: Internal Masking and Alpha Blending are enabled,4: External Frame Buffer Masking is enabled,5: External Frame Buffer Alpha Blending is enabled,6: External Frame Buffer Masking and Alpha..,7: Internal Frame Buffer Masking is enabled,8: Internal Frame Buffer Alpha Blending is enabled,9: Internal Frame Buffer Masking and Alpha..,?..." bitfld.long 0x00 0.--1. "DD,TFT Direct Drive Mode" "0: Direct Drive is disabled,1: Direct Drive from internal memory enabled and..,2: Direct Drive from external memory enabled and..,?..." rgroup.long 0x60++0x03 line.long 0x00 "TFTSTATUS,TFT Status Register" hexmask.long.word 0x00 16.--30. 1. "VCNT,Vertical Count" hexmask.long.word 0x00 0.--10. 1. "HCNT,Horizontal Count" group.long 0x64++0x03 line.long 0x00 "TFTCOLORFORMAT,Color Format Register" bitfld.long 0x00 8.--9. "PIXEL1FORMAT,Source and Destination Pixel Color Format" "0: RGB data is 555,1: RGB data is 565,2: RGB data is 666,3: RGB data is 888" bitfld.long 0x00 0.--2. "PIXEL0FORMAT,Sprite Pixel Color Format" "0: ARGB data is 0555,1: ARGB data is 0565,2: ARGB data is 0666,3: ARGB data is 0888,4: ARGB data is 5555,5: ARGB data is 6565,6: ARGB data is 6666,7: ARGB data is 8888" group.long 0x68++0x03 line.long 0x00 "TFTFRAMEBASE,TFT Frame Base Register" hexmask.long 0x00 0.--27. 1. "FRAMEBASE,Frame Base Address" group.long 0x70++0x03 line.long 0x00 "TFTSTRIDE,TFT Stride Register" hexmask.long.word 0x00 0.--11. 1. "HSTRIDE,Horizontal Stride" group.long 0x74++0x03 line.long 0x00 "TFTSIZE,TFT Size Register" hexmask.long.word 0x00 16.--25. 1. "VSZ,Vertical Size (excluding Porches)" hexmask.long.word 0x00 0.--9. 1. "HSZ,Horizontal Size (excluding Porches)" group.long 0x78++0x03 line.long 0x00 "TFTHPORCH,TFT Horizontal Porch Register" bitfld.long 0x00 28.--29. "HSYNCSTART,HSYNC Start Delay" "0,1,2,3" hexmask.long.byte 0x00 18.--25. 1. "HBPORCH,Horizontal Back Porch Size" newline hexmask.long.byte 0x00 8.--15. 1. "HFPORCH,Horizontal Front Porch Size" hexmask.long.byte 0x00 0.--6. 1. "HSYNC,Horizontal Synchronization Pulse Width" group.long 0x7C++0x03 line.long 0x00 "TFTVPORCH,TFT Vertical Porch Register" hexmask.long.word 0x00 20.--31. 1. "VBPORCH,Vertical Back Porch Size" hexmask.long.word 0x00 8.--19. 1. "VFPORCH,Vertical Front Porch Size" newline hexmask.long.byte 0x00 0.--6. 1. "VSYNC,Vertical Synchronization Pulse Width" group.long 0x80++0x03 line.long 0x00 "TFTTIMING,TFT Timing Register" bitfld.long 0x00 28.--30. "TFTHOLD,TFT Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 24.--26. "TFTSETUP,TFT Setup Time" "0,1,2,3,4,5,6,7" newline hexmask.long.word 0x00 12.--23. 1. "TFTSTART,TFT Direct Drive Transaction Start" hexmask.long.word 0x00 0.--11. 1. "DCLKPERIOD,TFT Direct Drive Transaction (EBI_DCLK) Period" group.long 0x84++0x03 line.long 0x00 "TFTPOLARITY,TFT Polarity Register" bitfld.long 0x00 4. "VSYNCPOL,VSYNC Polarity" "0,1" bitfld.long 0x00 3. "HSYNCPOL,Address Latch Polarity" "0,1" newline bitfld.long 0x00 2. "DATAENPOL,TFT DATAEN Polarity" "0,1" bitfld.long 0x00 1. "DCLKPOL,TFT DCLK Polarity" "0,1" newline bitfld.long 0x00 0. "CSPOL,TFT Chip Select Polarity" "0,1" group.long 0x88++0x03 line.long 0x00 "TFTDD,TFT Direct Drive Data Register" hexmask.long.tbyte 0x00 0.--23. 1. "DATA,TFT Direct Drive Data From Internal Memory" group.long 0x8C++0x03 line.long 0x00 "TFTALPHA,TFT Alpha Blending Register" hexmask.long.word 0x00 0.--8. 1. "ALPHA,TFT Alpha Blending Factor" group.long 0x90++0x03 line.long 0x00 "TFTPIXEL0,TFT Pixel 0 Register" hexmask.long.tbyte 0x00 0.--23. 1. "DATA,RGB Data" group.long 0x94++0x03 line.long 0x00 "TFTPIXEL1,TFT Pixel 1 Register" hexmask.long.tbyte 0x00 0.--23. 1. "DATA,RGB Data" rgroup.long 0x98++0x03 line.long 0x00 "TFTPIXEL,TFT Alpha Blending Result Pixel Register" hexmask.long.tbyte 0x00 0.--23. 1. "DATA,Alpha Blending Result" group.long 0x9C++0x03 line.long 0x00 "TFTMASK,TFT Masking Register" hexmask.long.tbyte 0x00 0.--23. 1. "TFTMASK,TFT Mask Value" rgroup.long 0xA0++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 9. "TFTPIXELOF,EBI_TFTPIXEL Register Overflow Interrupt Flag" "0,1" bitfld.long 0x00 8. "TFTPIXELFULL,EBI_TFTPIXEL is Full Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "TFTPIXEL1EMPTY,EBI_TFTPIXEL1 is Empty Interrupt Flag" "0,1" bitfld.long 0x00 6. "TFTPIXEL0EMPTY,EBI_TFTPIXEL0 is Empty Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "DDJIT,Direct Drive Jitter Interrupt Flag" "0,1" bitfld.long 0x00 4. "DDEMPTY,Direct Drive Data Empty Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "VFPORCH,Vertical Front Porch Interrupt Flag" "0,1" bitfld.long 0x00 2. "VBPORCH,Vertical Back Porch Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "HSYNC,Horizontal Sync Interrupt Flag" "0,1" bitfld.long 0x00 0. "VSYNC,Vertical Sync Interrupt Flag" "0,1" wgroup.long 0xA4++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 9. "TFTPIXELOF,EBI_TFTPIXEL Overflow Interrupt Flag Set" "0,1" bitfld.long 0x00 8. "TFTPIXELFULL,EBI_TFTPIXEL Full Interrupt Flag Set" "0,1" newline bitfld.long 0x00 7. "TFTPIXEL1EMPTY,EBI_TFTPIXEL1 Empty Interrupt Flag Set" "0,1" bitfld.long 0x00 6. "TFTPIXEL0EMPTY,EBI_TFTPIXEL0 Empty Interrupt Flag Set" "0,1" newline bitfld.long 0x00 5. "DDJIT,Direct Drive Jitter Interrupt Flag Set" "0,1" bitfld.long 0x00 4. "DDEMPTY,Direct Drive Data Empty Interrupt Flag Set" "0,1" newline bitfld.long 0x00 3. "VFPORCH,Vertical Front Porch Interrupt Flag Set" "0,1" bitfld.long 0x00 2. "VBPORCH,Vertical Back Porch Interrupt Flag Set" "0,1" newline bitfld.long 0x00 1. "HSYNC,Horizontal Sync Interrupt Flag Set" "0,1" bitfld.long 0x00 0. "VSYNC,Vertical Sync Interrupt Flag Set" "0,1" wgroup.long 0xA8++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 9. "TFTPIXELOF,EBI_TFTPIXEL Overflow Interrupt Flag Clear" "0,1" bitfld.long 0x00 8. "TFTPIXELFULL,EBI_TFTPIXEL Full Interrupt Flag Clear" "0,1" newline bitfld.long 0x00 7. "TFTPIXEL1EMPTY,EBI_TFTPIXEL1 Empty Interrupt Flag Clear" "0,1" bitfld.long 0x00 6. "TFTPIXEL0EMPTY,EBI_TFTPIXEL0 Empty Interrupt Flag Clear" "0,1" newline bitfld.long 0x00 5. "DDJIT,Direct Drive Jitter Interrupt Flag Clear" "0,1" bitfld.long 0x00 4. "DDEMPTY,Direct Drive Data Empty Interrupt Flag Clear" "0,1" newline bitfld.long 0x00 3. "VFPORCH,Vertical Front Porch Interrupt Flag Clear" "0,1" bitfld.long 0x00 2. "VBPORCH,Vertical Back Porch Interrupt Flag Clear" "0,1" newline bitfld.long 0x00 1. "HSYNC,Horizontal Sync Interrupt Flag Clear" "0,1" bitfld.long 0x00 0. "VSYNC,Vertical Sync Interrupt Flag Clear" "0,1" group.long 0xAC++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 9. "TFTPIXELOF,EBI_TFTPIXEL Overflow Interrupt Enable" "0,1" bitfld.long 0x00 8. "TFTPIXELFULL,EBI_TFTPIXEL Full Interrupt Enable" "0,1" newline bitfld.long 0x00 7. "TFTPIXEL1EMPTY,EBI_TFTPIXEL1 Empty Interrupt Enable" "0,1" bitfld.long 0x00 6. "TFTPIXEL0EMPTY,EBI_TFTPIXEL0 Empty Interrupt Enable" "0,1" newline bitfld.long 0x00 5. "DDJIT,Direct Drive Jitter Interrupt Enable" "0,1" bitfld.long 0x00 4. "DDEMPTY,Direct Drive Data Empty Interrupt Enable" "0,1" newline bitfld.long 0x00 3. "VFPORCH,Vertical Front Porch Interrupt Enable" "0,1" bitfld.long 0x00 2. "VBPORCH,Vertical Back Porch Interrupt Enable" "0,1" newline bitfld.long 0x00 1. "HSYNC,Horizontal Sync Interrupt Enable" "0,1" bitfld.long 0x00 0. "VSYNC,Vertical Sync Interrupt Enable" "0,1" group.long 0xB0++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Register" bitfld.long 0x00 26. "CSTFTPEN,EBI_CSTFT Pin Enable" "0,1" bitfld.long 0x00 25. "DATAENPEN,EBI_DATA Pin Enable" "0,1" newline bitfld.long 0x00 24. "TFTPEN,EBI_TFT Pin Enable" "0,1" bitfld.long 0x00 18.--22. "APEN,EBI_A Pin Enable" "0: All EBI_A pins are disabled,?,?,?,?,5: EBI_A[4:L] pins enabled,6: EBI_A[5:L] pins enabled,7: EBI_A[6:L] pins enabled,8: EBI_A[7:L] pins enabled,9: EBI_A[8:L] pins enabled,10: EBI_A[9:L] pins enabled,11: EBI_A[10:L] pins enabled,12: EBI_A[11:L] pins enabled,13: EBI_A[12:L] pins enabled,14: EBI_A[13:L] pins enabled,15: EBI_A[14:L] pins enabled,16: EBI_A[15:L] pins enabled,17: EBI_A[16:L] pins enabled,18: EBI_A[17:L] pins enabled,19: EBI_A[18:L] pins enabled,20: EBI_A[19:L] pins enabled,21: EBI_A[20:L] pins enabled,22: EBI_A[21:L] pins enabled,23: EBI_A[22:L] pins enabled,24: EBI_A[23:L] pins enabled,25: EBI_A[24:L] pins enabled,26: EBI_A[25:L] pins enabled,27: EBI_A[26:L] pins enabled,28: EBI_A[27:L] pins enabled,?..." newline bitfld.long 0x00 16.--17. "ALB,Sets the Lower Bound for EBI_A Enabling" "0: Address lines from EBI_A[0] and upwards can..,1: Address lines from EBI_A[8] and upwards can..,2: Address lines from EBI_A[16] and upwards can..,3: Address lines from EBI_A[24] and upwards can.." bitfld.long 0x00 12. "NANDPEN,NANDRE and NANDWE Pin Enable" "0,1" newline bitfld.long 0x00 7. "BLPEN,EBI_BL[1:0] Pin Enable" "0,1" bitfld.long 0x00 6. "ARDYPEN,EBI_ARDY Pin Enable" "0,1" newline bitfld.long 0x00 5. "ALEPEN,EBI_ALE Pin Enable" "0,1" bitfld.long 0x00 4. "CS3PEN,EBI_CS3 Pin Enable" "0,1" newline bitfld.long 0x00 3. "CS2PEN,EBI_CS2 Pin Enable" "0,1" bitfld.long 0x00 2. "CS1PEN,EBI_CS1 Pin Enable" "0,1" newline bitfld.long 0x00 1. "CS0PEN,EBI_CS0 Pin Enable" "0,1" bitfld.long 0x00 0. "EBIPEN,EBI Pin Enable" "0,1" group.long 0xB4++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 24.--29. "TFTLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." bitfld.long 0x00 16.--21. "NANDLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." newline bitfld.long 0x00 8.--13. "CSLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." bitfld.long 0x00 0.--5. "EBILOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." group.long 0xB8++0x03 line.long 0x00 "ROUTELOC1,I/O Routing Location Register" bitfld.long 0x00 16.--21. "RDYLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." bitfld.long 0x00 8.--13. "ALOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." newline bitfld.long 0x00 0.--5. "ADLOC,I/O Location" "0: Location 0,1: Location 1,?..." tree.end tree "EMU" base ad:0x400E3000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 16.--17. "EM4HVSCALE,EM4H Voltage Scale" "0: Voltage Scale Level 2,?,2: Voltage Scale Level 0,3: RESV" bitfld.long 0x00 8.--9. "EM23VSCALE,EM23 Voltage Scale" "0: Voltage Scale Level 2,?,2: Voltage Scale Level 0,3: RESV" newline bitfld.long 0x00 4. "EM23VSCALEAUTOWSEN,Automatically Configures Flash and Frequency to Wakeup From EM2 or EM3 at Low Voltage" "0,1" bitfld.long 0x00 3. "EM01LD,Reserved for internal use" "0,1" newline bitfld.long 0x00 2. "EM2BODDIS,Disable BOD in EM2" "0,1" bitfld.long 0x00 1. "EM2BLOCK,Energy Mode 2 Block" "0,1" rgroup.long 0x04++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 26. "TEMPACTIVE,Temperature Measurement Active" "0,1" bitfld.long 0x00 20. "EM4IORET,IO Retention Status" "0,1" newline bitfld.long 0x00 18. "VSCALEBUSY,System is Busy Scaling Voltage" "0,1" bitfld.long 0x00 16.--17. "VSCALE,Current Voltage Scale Value" "0: Voltage Scale Level 2,?,2: Voltage Scale Level 0,3: RESV" newline bitfld.long 0x00 12. "BURDY,Backup Mode Ready" "0,1" bitfld.long 0x00 7. "VMONBUVDD,VMON BUVDD Channel" "0,1" newline bitfld.long 0x00 5. "VMONIO1,VMON IOVDD1 Channel" "0,1" bitfld.long 0x00 4. "VMONIO0,VMON IOVDD0 Channel" "0,1" newline bitfld.long 0x00 3. "VMONDVDD,VMON DVDD Channel" "0,1" bitfld.long 0x00 2. "VMONALTAVDD,Alternate VMON AVDD Channel" "0,1" newline bitfld.long 0x00 1. "VMONAVDD,VMON AVDD Channel" "0,1" bitfld.long 0x00 0. "VMONRDY,VMON Ready" "0,1" group.long 0x08++0x03 line.long 0x00 "LOCK,Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,Configuration Lock Key" group.long 0x0C++0x03 line.long 0x00 "RAM0CTRL,Memory Control Register" bitfld.long 0x00 0.--2. "RAMPOWERDOWN,RAM0 Blockset Power-down" "0: None of the RAM blocks powered down,?,?,?,4: Power down RAM block 3,?,6: Power down RAM blocks 2 and above,7: Power down RAM blocks 1 and above" wgroup.long 0x10++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 6. "EM01VSCALE2,EM01 Voltage Scale Command to Scale to Voltage Scale Level 2" "0,1" bitfld.long 0x00 4. "EM01VSCALE0,EM01 Voltage Scale Command to Scale to Voltage Scale Level 0" "0,1" newline bitfld.long 0x00 0. "EM4UNLATCH,EM4 Unlatch" "0,1" group.long 0x18++0x03 line.long 0x00 "EM4CTRL,EM4 Control Register" bitfld.long 0x00 16.--17. "EM4ENTRY,Energy Mode 4 Entry" "0,1,2,3" bitfld.long 0x00 4.--5. "EM4IORETMODE,EM4 IO Retention Disable" "0: No Retention,1: Retention through EM4,2: Retention through EM4 and Wakeup,?..." newline bitfld.long 0x00 3. "RETAINULFRCO,ULFRCO Retain During EM4S" "0,1" bitfld.long 0x00 2. "RETAINLFXO,LFXO Retain During EM4" "0,1" newline bitfld.long 0x00 1. "RETAINLFRCO,LFRCO Retain During EM4" "0,1" bitfld.long 0x00 0. "EM4STATE,Energy Mode 4 State" "0,1" group.long 0x1C++0x03 line.long 0x00 "TEMPLIMITS,Temperature Limits for Interrupt Generation" bitfld.long 0x00 16. "EM4WUEN,Enable EM4 Wakeup Due to Low/high Temperature" "0,1" hexmask.long.byte 0x00 8.--15. 1. "TEMPHIGH,Temperature High Limit" newline hexmask.long.byte 0x00 0.--7. 1. "TEMPLOW,Temperature Low Limit" rgroup.long 0x20++0x03 line.long 0x00 "TEMP,Value of Last Temperature Measurement" hexmask.long.byte 0x00 0.--7. 1. "TEMP,Temperature Measurement" rgroup.long 0x24++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 31. "TEMPHIGH,Temperature High Limit Reached" "0,1" bitfld.long 0x00 30. "TEMPLOW,Temperature Low Limit Reached" "0,1" newline bitfld.long 0x00 29. "TEMP,New Temperature Measurement Valid" "0,1" bitfld.long 0x00 25. "VSCALEDONE,Voltage Scale Steps Done IRQ" "0,1" newline bitfld.long 0x00 24. "EM23WAKEUP,Wakeup IRQ From EM2 and EM3" "0,1" bitfld.long 0x00 23. "R5VVSINT,5V Regulator Voltage Update Done" "0,1" newline bitfld.long 0x00 22. "BURDY,Backup Functionality Ready Interrupt Flag" "0,1" bitfld.long 0x00 20. "DCDCINBYPASS,DCDC is in Bypass" "0,1" newline bitfld.long 0x00 19. "DCDCLNRUNNING,LN Mode is Running" "0,1" bitfld.long 0x00 18. "DCDCLPRUNNING,LP Mode is Running" "0,1" newline bitfld.long 0x00 17. "NFETOVERCURRENTLIMIT,NFET Current Limit Hit" "0,1" bitfld.long 0x00 16. "PFETOVERCURRENTLIMIT,PFET Current Limit Hit" "0,1" newline bitfld.long 0x00 13. "VMONBUVDDRISE,VMON BUVDD Channel Rise" "0,1" bitfld.long 0x00 12. "VMONBUVDDFALL,VMON BACKUP Channel Fall" "0,1" newline bitfld.long 0x00 10. "R5VREADY,5V Regulator is Ready to Use" "0,1" bitfld.long 0x00 9. "VMONIO1RISE,VMON IOVDD1 Channel Rise" "0,1" newline bitfld.long 0x00 8. "VMONIO1FALL,VMON IOVDD1 Channel Fall" "0,1" bitfld.long 0x00 7. "VMONIO0RISE,VMON IOVDD0 Channel Rise" "0,1" newline bitfld.long 0x00 6. "VMONIO0FALL,VMON IOVDD0 Channel Fall" "0,1" bitfld.long 0x00 5. "VMONDVDDRISE,VMON DVDD Channel Rise" "0,1" newline bitfld.long 0x00 4. "VMONDVDDFALL,VMON DVDD Channel Fall" "0,1" bitfld.long 0x00 3. "VMONALTAVDDRISE,Alternate VMON AVDD Channel Rise" "0,1" newline bitfld.long 0x00 2. "VMONALTAVDDFALL,Alternate VMON AVDD Channel Fall" "0,1" bitfld.long 0x00 1. "VMONAVDDRISE,VMON AVDD Channel Rise" "0,1" newline bitfld.long 0x00 0. "VMONAVDDFALL,VMON AVDD Channel Fall" "0,1" wgroup.long 0x28++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 31. "TEMPHIGH,Set TEMPHIGH Interrupt Flag" "0,1" bitfld.long 0x00 30. "TEMPLOW,Set TEMPLOW Interrupt Flag" "0,1" newline bitfld.long 0x00 29. "TEMP,Set TEMP Interrupt Flag" "0,1" bitfld.long 0x00 25. "VSCALEDONE,Set VSCALEDONE Interrupt Flag" "0,1" newline bitfld.long 0x00 24. "EM23WAKEUP,Set EM23WAKEUP Interrupt Flag" "0,1" bitfld.long 0x00 23. "R5VVSINT,Set R5VVSINT Interrupt Flag" "0,1" newline bitfld.long 0x00 22. "BURDY,Set BURDY Interrupt Flag" "0,1" bitfld.long 0x00 20. "DCDCINBYPASS,Set DCDCINBYPASS Interrupt Flag" "0,1" newline bitfld.long 0x00 19. "DCDCLNRUNNING,Set DCDCLNRUNNING Interrupt Flag" "0,1" bitfld.long 0x00 18. "DCDCLPRUNNING,Set DCDCLPRUNNING Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "NFETOVERCURRENTLIMIT,Set NFETOVERCURRENTLIMIT Interrupt Flag" "0,1" bitfld.long 0x00 16. "PFETOVERCURRENTLIMIT,Set PFETOVERCURRENTLIMIT Interrupt Flag" "0,1" newline bitfld.long 0x00 13. "VMONBUVDDRISE,Set VMONBUVDDRISE Interrupt Flag" "0,1" bitfld.long 0x00 12. "VMONBUVDDFALL,Set VMONBUVDDFALL Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "R5VREADY,Set R5VREADY Interrupt Flag" "0,1" bitfld.long 0x00 9. "VMONIO1RISE,Set VMONIO1RISE Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "VMONIO1FALL,Set VMONIO1FALL Interrupt Flag" "0,1" bitfld.long 0x00 7. "VMONIO0RISE,Set VMONIO0RISE Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "VMONIO0FALL,Set VMONIO0FALL Interrupt Flag" "0,1" bitfld.long 0x00 5. "VMONDVDDRISE,Set VMONDVDDRISE Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "VMONDVDDFALL,Set VMONDVDDFALL Interrupt Flag" "0,1" bitfld.long 0x00 3. "VMONALTAVDDRISE,Set VMONALTAVDDRISE Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "VMONALTAVDDFALL,Set VMONALTAVDDFALL Interrupt Flag" "0,1" bitfld.long 0x00 1. "VMONAVDDRISE,Set VMONAVDDRISE Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "VMONAVDDFALL,Set VMONAVDDFALL Interrupt Flag" "0,1" wgroup.long 0x2C++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 31. "TEMPHIGH,Clear TEMPHIGH Interrupt Flag" "0,1" bitfld.long 0x00 30. "TEMPLOW,Clear TEMPLOW Interrupt Flag" "0,1" newline bitfld.long 0x00 29. "TEMP,Clear TEMP Interrupt Flag" "0,1" bitfld.long 0x00 25. "VSCALEDONE,Clear VSCALEDONE Interrupt Flag" "0,1" newline bitfld.long 0x00 24. "EM23WAKEUP,Clear EM23WAKEUP Interrupt Flag" "0,1" bitfld.long 0x00 23. "R5VVSINT,Clear R5VVSINT Interrupt Flag" "0,1" newline bitfld.long 0x00 22. "BURDY,Clear BURDY Interrupt Flag" "0,1" bitfld.long 0x00 20. "DCDCINBYPASS,Clear DCDCINBYPASS Interrupt Flag" "0,1" newline bitfld.long 0x00 19. "DCDCLNRUNNING,Clear DCDCLNRUNNING Interrupt Flag" "0,1" bitfld.long 0x00 18. "DCDCLPRUNNING,Clear DCDCLPRUNNING Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "NFETOVERCURRENTLIMIT,Clear NFETOVERCURRENTLIMIT Interrupt Flag" "0,1" bitfld.long 0x00 16. "PFETOVERCURRENTLIMIT,Clear PFETOVERCURRENTLIMIT Interrupt Flag" "0,1" newline bitfld.long 0x00 13. "VMONBUVDDRISE,Clear VMONBUVDDRISE Interrupt Flag" "0,1" bitfld.long 0x00 12. "VMONBUVDDFALL,Clear VMONBUVDDFALL Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "R5VREADY,Clear R5VREADY Interrupt Flag" "0,1" bitfld.long 0x00 9. "VMONIO1RISE,Clear VMONIO1RISE Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "VMONIO1FALL,Clear VMONIO1FALL Interrupt Flag" "0,1" bitfld.long 0x00 7. "VMONIO0RISE,Clear VMONIO0RISE Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "VMONIO0FALL,Clear VMONIO0FALL Interrupt Flag" "0,1" bitfld.long 0x00 5. "VMONDVDDRISE,Clear VMONDVDDRISE Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "VMONDVDDFALL,Clear VMONDVDDFALL Interrupt Flag" "0,1" bitfld.long 0x00 3. "VMONALTAVDDRISE,Clear VMONALTAVDDRISE Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "VMONALTAVDDFALL,Clear VMONALTAVDDFALL Interrupt Flag" "0,1" bitfld.long 0x00 1. "VMONAVDDRISE,Clear VMONAVDDRISE Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "VMONAVDDFALL,Clear VMONAVDDFALL Interrupt Flag" "0,1" group.long 0x30++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 31. "TEMPHIGH,TEMPHIGH Interrupt Enable" "0,1" bitfld.long 0x00 30. "TEMPLOW,TEMPLOW Interrupt Enable" "0,1" newline bitfld.long 0x00 29. "TEMP,TEMP Interrupt Enable" "0,1" bitfld.long 0x00 25. "VSCALEDONE,VSCALEDONE Interrupt Enable" "0,1" newline bitfld.long 0x00 24. "EM23WAKEUP,EM23WAKEUP Interrupt Enable" "0,1" bitfld.long 0x00 23. "R5VVSINT,R5VVSINT Interrupt Enable" "0,1" newline bitfld.long 0x00 22. "BURDY,BURDY Interrupt Enable" "0,1" bitfld.long 0x00 20. "DCDCINBYPASS,DCDCINBYPASS Interrupt Enable" "0,1" newline bitfld.long 0x00 19. "DCDCLNRUNNING,DCDCLNRUNNING Interrupt Enable" "0,1" bitfld.long 0x00 18. "DCDCLPRUNNING,DCDCLPRUNNING Interrupt Enable" "0,1" newline bitfld.long 0x00 17. "NFETOVERCURRENTLIMIT,NFETOVERCURRENTLIMIT Interrupt Enable" "0,1" bitfld.long 0x00 16. "PFETOVERCURRENTLIMIT,PFETOVERCURRENTLIMIT Interrupt Enable" "0,1" newline bitfld.long 0x00 13. "VMONBUVDDRISE,VMONBUVDDRISE Interrupt Enable" "0,1" bitfld.long 0x00 12. "VMONBUVDDFALL,VMONBUVDDFALL Interrupt Enable" "0,1" newline bitfld.long 0x00 10. "R5VREADY,R5VREADY Interrupt Enable" "0,1" bitfld.long 0x00 9. "VMONIO1RISE,VMONIO1RISE Interrupt Enable" "0,1" newline bitfld.long 0x00 8. "VMONIO1FALL,VMONIO1FALL Interrupt Enable" "0,1" bitfld.long 0x00 7. "VMONIO0RISE,VMONIO0RISE Interrupt Enable" "0,1" newline bitfld.long 0x00 6. "VMONIO0FALL,VMONIO0FALL Interrupt Enable" "0,1" bitfld.long 0x00 5. "VMONDVDDRISE,VMONDVDDRISE Interrupt Enable" "0,1" newline bitfld.long 0x00 4. "VMONDVDDFALL,VMONDVDDFALL Interrupt Enable" "0,1" bitfld.long 0x00 3. "VMONALTAVDDRISE,VMONALTAVDDRISE Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "VMONALTAVDDFALL,VMONALTAVDDFALL Interrupt Enable" "0,1" bitfld.long 0x00 1. "VMONAVDDRISE,VMONAVDDRISE Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "VMONAVDDFALL,VMONAVDDFALL Interrupt Enable" "0,1" group.long 0x34++0x03 line.long 0x00 "PWRLOCK,Regulator and Supply Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,Regulator and Supply Configuration Lock Key" group.long 0x3C++0x03 line.long 0x00 "PWRCTRL,Power Control Register" bitfld.long 0x00 13. "IMMEDIATEPWRSWITCH,Allows Immediate Switching of ANASW and REGPWRSEL Bitfields" "0,1" bitfld.long 0x00 10. "REGPWRSEL,This Field Selects the Input Supply Pin for the Digital LDO" "0,1" newline bitfld.long 0x00 5. "ANASW,Analog Switch Selection" "0,1" group.long 0x40++0x03 line.long 0x00 "DCDCCTRL,DCDC Control" bitfld.long 0x00 5. "DCDCMODEEM4,DCDC Mode EM4H" "0,1" bitfld.long 0x00 4. "DCDCMODEEM23,DCDC Mode EM23" "0,1" newline bitfld.long 0x00 0.--1. "DCDCMODE,Regulator Mode" "0: DCDC regulator is operating in bypass mode,1: DCDC regulator is operating in low noise mode,2: DCDC regulator is operating in low power mode,3: DCDC regulator is off and the bypass switch.." group.long 0x4C++0x03 line.long 0x00 "DCDCMISCCTRL,DCDC Miscellaneous Control Register" bitfld.long 0x00 28.--29. "LPCMPBIASEM234H,LP Mode Comparator Bias Selection for EM23 or EM4H" "0: Maximum load current less than 75uA,1: Maximum load current less than 500uA,2: Maximum load current less than 2.5mA,3: Maximum load current less than 10mA" bitfld.long 0x00 24.--26. "LNCLIMILIMSEL,Current Limit Level Selection for Current Limiter in LN Mode" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 20.--22. "LPCLIMILIMSEL,Current Limit Level Selection for Current Limiter in LP Mode" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--19. "BYPLIMSEL,Current Limit in Bypass Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "NFETCNT,NFET Switch Number Selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "PFETCNT,PFET Switch Number Selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5. "LNFORCECCMIMM,Force DCDC Into CCM Mode Immediately Based on LNFORCECCM" "0,1" bitfld.long 0x00 2. "LPCMPHYSHI,Comparator Threshold on the High Side" "0,1" newline bitfld.long 0x00 1. "LPCMPHYSDIS,Disable LP Mode Hysteresis in the State Machine Control" "0,1" bitfld.long 0x00 0. "LNFORCECCM,Force DCDC Into CCM Mode in Low Noise Operation" "0,1" group.long 0x50++0x03 line.long 0x00 "DCDCZDETCTRL,DCDC Power Train NFET Zero Current Detector Control Register" bitfld.long 0x00 8.--9. "ZDETBLANKDLY,Reserved for internal use" "0,1,2,3" bitfld.long 0x00 4.--6. "ZDETILIMSEL,Reverse Current Limit Level Selection for Zero Detector" "0,1,2,3,4,5,6,7" group.long 0x54++0x03 line.long 0x00 "DCDCCLIMCTRL,DCDC Power Train PFET Current Limiter Control Register" bitfld.long 0x00 13. "BYPLIMEN,Bypass Current Limit Enable" "0,1" bitfld.long 0x00 8.--9. "CLIMBLANKDLY,Reserved for internal use" "0,1,2,3" group.long 0x58++0x03 line.long 0x00 "DCDCLNCOMPCTRL,DCDC Low Noise Compensator Control Register" bitfld.long 0x00 28.--31. "COMPENC3,Low Noise Mode Compensator C3 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--26. "COMPENC2,Low Noise Mode Compensator C2 Trim Value" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 20.--21. "COMPENC1,Low Noise Mode Compensator C1 Trim Value" "0,1,2,3" bitfld.long 0x00 12.--15. "COMPENR3,Low Noise Mode Compensator R3 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--8. "COMPENR2,Low Noise Mode Compensator R2 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--2. "COMPENR1,Low Noise Mode Compensator R1 Trim Value" "0,1,2,3,4,5,6,7" group.long 0x5C++0x03 line.long 0x00 "DCDCLNVCTRL,DCDC Low Noise Voltage Register" hexmask.long.byte 0x00 8.--14. 1. "LNVREF,Low Noise Mode VREF Trim" bitfld.long 0x00 1. "LNATT,Low Noise Mode Feedback Attenuation" "0,1" group.long 0x64++0x03 line.long 0x00 "DCDCLPVCTRL,DCDC Low Power Voltage Register" hexmask.long.byte 0x00 1.--8. 1. "LPVREF,LP Mode Reference Selection for EM23 and EM4H" bitfld.long 0x00 0. "LPATT,Low Power Feedback Attenuation" "0,1" group.long 0x6C++0x03 line.long 0x00 "DCDCLPCTRL,DCDC Low Power Control Register" bitfld.long 0x00 25.--26. "LPBLANK,Reserved for internal use" "0,1,2,3" bitfld.long 0x00 24. "LPVREFDUTYEN,LP Mode Duty Cycling Enable" "0,1" newline bitfld.long 0x00 12.--15. "LPCMPHYSSELEM234H,LP Mode Hysteresis Selection for EM23 and EM4H" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x70++0x03 line.long 0x00 "DCDCLNFREQCTRL,DCDC Low Noise Controller Frequency Control" bitfld.long 0x00 24.--28. "RCOTRIM,Reserved for internal use" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--2. "RCOBAND,LN Mode RCO Frequency Band Selection" "0,1,2,3,4,5,6,7" rgroup.long 0x78++0x03 line.long 0x00 "DCDCSYNC,DCDC Read Status Register" bitfld.long 0x00 0. "DCDCCTRLBUSY,DCDC CTRL Register Transfer Busy" "0,1" group.long 0x90++0x03 line.long 0x00 "VMONAVDDCTRL,VMON AVDD Channel Control" bitfld.long 0x00 20.--23. "RISETHRESCOARSE,Rising Threshold Coarse Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. "RISETHRESFINE,Rising Threshold Fine Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--15. "FALLTHRESCOARSE,Falling Threshold Coarse Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "FALLTHRESFINE,Falling Threshold Fine Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 3. "FALLWU,Fall Wakeup" "0,1" bitfld.long 0x00 2. "RISEWU,Rise Wakeup" "0,1" newline bitfld.long 0x00 0. "EN,Enable" "0,1" group.long 0x94++0x03 line.long 0x00 "VMONALTAVDDCTRL,Alternate VMON AVDD Channel Control" bitfld.long 0x00 12.--15. "THRESCOARSE,Threshold Coarse Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "THRESFINE,Threshold Fine Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 3. "FALLWU,Fall Wakeup" "0,1" bitfld.long 0x00 2. "RISEWU,Rise Wakeup" "0,1" newline bitfld.long 0x00 0. "EN,Enable" "0,1" group.long 0x98++0x03 line.long 0x00 "VMONDVDDCTRL,VMON DVDD Channel Control" bitfld.long 0x00 12.--15. "THRESCOARSE,Threshold Coarse Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "THRESFINE,Threshold Fine Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 3. "FALLWU,Fall Wakeup" "0,1" bitfld.long 0x00 2. "RISEWU,Rise Wakeup" "0,1" newline bitfld.long 0x00 0. "EN,Enable" "0,1" group.long 0x9C++0x03 line.long 0x00 "VMONIO0CTRL,VMON IOVDD0 Channel Control" bitfld.long 0x00 12.--15. "THRESCOARSE,Threshold Coarse Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "THRESFINE,Threshold Fine Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "RETDIS,EM4 IO0 Retention Disable" "0,1" bitfld.long 0x00 3. "FALLWU,Fall Wakeup" "0,1" newline bitfld.long 0x00 2. "RISEWU,Rise Wakeup" "0,1" bitfld.long 0x00 0. "EN,Enable" "0,1" group.long 0xA0++0x03 line.long 0x00 "VMONIO1CTRL,VMON IOVDD1 Channel Control" bitfld.long 0x00 12.--15. "THRESCOARSE,Threshold Coarse Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "THRESFINE,Threshold Fine Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4. "RETDIS,EM4 IO1 Retention Disable" "0,1" bitfld.long 0x00 3. "FALLWU,Fall Wakeup" "0,1" newline bitfld.long 0x00 2. "RISEWU,Rise Wakeup" "0,1" bitfld.long 0x00 0. "EN,Enable" "0,1" group.long 0xA4++0x03 line.long 0x00 "VMONBUVDDCTRL,VMON BUVDD Channel Control" bitfld.long 0x00 12.--15. "THRESCOARSE,Threshold Coarse Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. "THRESFINE,Threshold Fine Adjust" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 3. "FALLWU,Fall Wakeup" "0,1" bitfld.long 0x00 2. "RISEWU,Rise Wakeup" "0,1" newline bitfld.long 0x00 0. "EN,Enable" "0,1" group.long 0xB4++0x03 line.long 0x00 "RAM1CTRL,Memory Control Register" bitfld.long 0x00 0.--3. "RAMPOWERDOWN,RAM1 Blockset Power-down" "0: None of the RAM blocks powered down,?,?,?,?,?,?,?,8: Power down RAM block 3 (address range..,?,?,?,12: Power down RAM blocks 2-3 (address range..,?,14: Power down RAM blocks 1-3 (address range..,15: Power down RAM blocks 0-3 (address range.." group.long 0xB8++0x03 line.long 0x00 "RAM2CTRL,Memory Control Register" bitfld.long 0x00 0.--3. "RAMPOWERDOWN,RAM2 Blockset Power-down" "0: None of the RAM blocks powered down,?,?,?,?,?,?,?,8: Power down RAM block 3,?,?,?,12: Power down RAM blocks 2-3,?,14: Power down RAM blocks 1-3,15: Power down RAM blocks 0-3" group.long 0xBC++0x03 line.long 0x00 "BUCTRL,Backup Power Configuration Register" bitfld.long 0x00 31. "DISMAXCOMP,Disable MAIN-BU Comparator" "0,1" bitfld.long 0x00 20.--21. "BUINACTPWRCON,Power Connection Configuration When Not in Backup Mode" "0: No connection,1: Main power and backup power are connected..,2: Main power and backup power are connected..,3: Main power and backup power are connected.." newline bitfld.long 0x00 16.--17. "BUACTPWRCON,Power Connection Configuration in Backup Mode" "0: No connection,1: Main power and backup power are connected..,2: Main power and backup power are connected..,3: Main power and backup power are connected.." bitfld.long 0x00 12.--13. "PWRRES,Power Domain Resistor Select" "0: Main power and backup power connected with..,1: Main power and backup power connected with..,2: Main power and backup power connected with..,3: Main power and backup power connected with.." newline bitfld.long 0x00 8.--9. "VOUTRES,BU_VOUT Resistor Select" "0: BU_VOUT is not connected,1: Enable weak switch between BU_VOUT and backup..,2: Enable medium switch between BU_VOUT and..,3: Enable strong switch between BU_VOUT and.." bitfld.long 0x00 2. "BUVINPROBEEN,Enable BU_VIN Probing" "0,1" newline bitfld.long 0x00 1. "STATEN,Enable Backup Mode Status Export" "0,1" bitfld.long 0x00 0. "EN,Enable Backup Mode" "0,1" group.long 0xC8++0x03 line.long 0x00 "R5VCTRL,5V Regulator Control" bitfld.long 0x00 8.--9. "INPUTMODE,5V Input Mode" "0: Regulator input supply switched automatically..,1: Force VBUS pin as the regulator input,2: Force VREGI pin as the regulator input,?..." bitfld.long 0x00 2. "IMONEN,Enable the Regulator Current Monitor for Selected Current Path to Either VREGI or VBUS" "0,1" newline bitfld.long 0x00 1. "EM4WUEN,Enable EM4 Wakeup Due to VBUS Detection" "0,1" bitfld.long 0x00 0. "BYPASS,5V Regulator Bypass" "0,1" group.long 0xCC++0x03 line.long 0x00 "R5VADCCTRL,5V Regulator Control" bitfld.long 0x00 12.--15. "AMUXSEL,ADC Mux Selection" "0: VBUS divided by 10,1: VREGI divided by 10,2: VREGO divided by 6,3: VREGI current monitor,4: VBUS current monitor,?..." bitfld.long 0x00 0. "ENAMUX,Enable the 5V Subsystem ADC MUX" "0,1" group.long 0xD0++0x03 line.long 0x00 "R5VOUTLEVEL,5V Regulator Voltage Select" bitfld.long 0x00 0.--3. "OUTLEVEL,5V Regulator Voltage" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xDC++0x03 line.long 0x00 "R5VDETCTRL,5V Detector Enables" bitfld.long 0x00 2. "VREGODETDIS,VREGO Detector Disable" "0,1" bitfld.long 0x00 1. "VBUSDETDIS,VBUS Detector Disable" "0,1" newline bitfld.long 0x00 0. "VREGIDETDIS,VREGI Detector Disable" "0,1" group.long 0xEC++0x03 line.long 0x00 "DCDCLPEM01CFG,Configuration Bits for Low Power Mode to Be Applied During EM01 This Field is Only Relevant If LP Mode is Used in EM01" bitfld.long 0x00 12.--15. "LPCMPHYSSELEM01,LP Mode Hysteresis Selection for EM01" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--9. "LPCMPBIASEM01,LP Mode Comparator Bias Selection for EM01" "0: Maximum load current less than 75uA,1: Maximum load current less than 500uA,2: Maximum load current less than 2.5mA,3: Maximum load current less than 10mA" sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") rgroup.long 0xF0++0x03 line.long 0x00 "R5VSTATUS,5V Detector Status Register" bitfld.long 0x00 5. "COLDSTART,Indicates If the Regulator is Going Through a Cold Start" "0,1" bitfld.long 0x00 4. "LDODROPOUTDET,Regulator Dropout Detection" "0,1" newline bitfld.long 0x00 3. "VBUSGTVREGI,Output of the Supply Comparator Between VBUS and VREGI" "0,1" bitfld.long 0x00 2. "VREGODET,VREGO Detected" "0,1" newline bitfld.long 0x00 1. "VBUSDET,USB VBUS Detected" "0,1" bitfld.long 0x00 0. "VREGIDET,VREGI Detected" "0,1" endif sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") rgroup.long 0xF0++0x03 line.long 0x00 "R5VSTATUS,5V Detector Status Register" bitfld.long 0x00 5. "COLDSTART,Indicates If the Regulator is Going Through a Cold Start" "0,1" bitfld.long 0x00 4. "LDODROPOUTDET,Regulator Dropout Detection" "0,1" newline bitfld.long 0x00 3. "VBUSGTVREGI,Output of the Supply Comparator Between VBUS and VREGI" "0,1" bitfld.long 0x00 2. "VREGODET,VREGO Detected" "0,1" newline bitfld.long 0x00 0. "VREGIDET,VREGI Detected" "0,1" endif rgroup.long 0xF8++0x03 line.long 0x00 "R5VSYNC,5V Read Status Register" bitfld.long 0x00 0. "OUTLEVELBUSY,5V Regulator Voltage Register Transfer Busy" "0,1" sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") wgroup.long 0x100++0x03 line.long 0x00 "EM23PERNORETAINCMD,Clears Corresponding Bits in EM23PERNORETAINSTATUS Unlocking Access to Peripheral" bitfld.long 0x00 24. "USBUNLOCK,Clears Status Bit of USB and Unlocks Access to It" "0,1" bitfld.long 0x00 23. "RTCUNLOCK,Clears Status Bit of RTC and Unlocks Access to It" "0,1" newline bitfld.long 0x00 21. "ACMP2UNLOCK,Clears Status Bit of ACMP2 and Unlocks Access to It" "0,1" bitfld.long 0x00 20. "ADC1UNLOCK,Clears Status Bit of ADC1 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 18. "LETIMER1UNLOCK,Clears Status Bit of LETIMER1 and Unlocks Access to It" "0,1" bitfld.long 0x00 17. "LCDUNLOCK,Clears Status Bit of LCD and Unlocks Access to It" "0,1" newline bitfld.long 0x00 16. "LEUART1UNLOCK,Clears Status Bit of LEUART1 and Unlocks Access to It" "0,1" bitfld.long 0x00 15. "LEUART0UNLOCK,Clears Status Bit of LEUART0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 14. "CSENUNLOCK,Clears Status Bit of CSEN and Unlocks Access to It" "0,1" bitfld.long 0x00 13. "LESENSE0UNLOCK,Clears Status Bit of LESENSE0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 12. "WDOG1UNLOCK,Clears Status Bit of WDOG1 and Unlocks Access to It" "0,1" bitfld.long 0x00 11. "WDOG0UNLOCK,Clears Status Bit of WDOG0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 10. "LETIMER0UNLOCK,Clears Status Bit of LETIMER0 and Unlocks Access to It" "0,1" bitfld.long 0x00 9. "ADC0UNLOCK,Clears Status Bit of ADC0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 8. "IDAC0UNLOCK,Clears Status Bit of IDAC0 and Unlocks Access to It" "0,1" bitfld.long 0x00 7. "DAC0UNLOCK,Clears Status Bit of DAC0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 6. "I2C1UNLOCK,Clears Status Bit of I2C1 and Unlocks Access to It" "0,1" bitfld.long 0x00 5. "I2C0UNLOCK,Clears Status Bit of I2C0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 4. "PCNT2UNLOCK,Clears Status Bit of PCNT2 and Unlocks Access to It" "0,1" bitfld.long 0x00 3. "PCNT1UNLOCK,Clears Status Bit of PCNT1 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 2. "PCNT0UNLOCK,Clears Status Bit of PCNT0 and Unlocks Access to It" "0,1" bitfld.long 0x00 1. "ACMP1UNLOCK,Clears Status Bit of ACMP1 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 0. "ACMP0UNLOCK,Clears Status Bit of ACMP0 and Unlocks Access to It" "0,1" endif sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") wgroup.long 0x100++0x03 line.long 0x00 "EM23PERNORETAINCMD,Clears Corresponding Bits in EM23PERNORETAINSTATUS Unlocking Access to Peripheral" bitfld.long 0x00 23. "RTCUNLOCK,Clears Status Bit of RTC and Unlocks Access to It" "0,1" bitfld.long 0x00 21. "ACMP2UNLOCK,Clears Status Bit of ACMP2 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 20. "ADC1UNLOCK,Clears Status Bit of ADC1 and Unlocks Access to It" "0,1" bitfld.long 0x00 18. "LETIMER1UNLOCK,Clears Status Bit of LETIMER1 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 17. "LCDUNLOCK,Clears Status Bit of LCD and Unlocks Access to It" "0,1" bitfld.long 0x00 16. "LEUART1UNLOCK,Clears Status Bit of LEUART1 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 15. "LEUART0UNLOCK,Clears Status Bit of LEUART0 and Unlocks Access to It" "0,1" bitfld.long 0x00 14. "CSENUNLOCK,Clears Status Bit of CSEN and Unlocks Access to It" "0,1" newline bitfld.long 0x00 13. "LESENSE0UNLOCK,Clears Status Bit of LESENSE0 and Unlocks Access to It" "0,1" bitfld.long 0x00 12. "WDOG1UNLOCK,Clears Status Bit of WDOG1 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 11. "WDOG0UNLOCK,Clears Status Bit of WDOG0 and Unlocks Access to It" "0,1" bitfld.long 0x00 10. "LETIMER0UNLOCK,Clears Status Bit of LETIMER0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 9. "ADC0UNLOCK,Clears Status Bit of ADC0 and Unlocks Access to It" "0,1" bitfld.long 0x00 8. "IDAC0UNLOCK,Clears Status Bit of IDAC0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 7. "DAC0UNLOCK,Clears Status Bit of DAC0 and Unlocks Access to It" "0,1" bitfld.long 0x00 6. "I2C1UNLOCK,Clears Status Bit of I2C1 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 5. "I2C0UNLOCK,Clears Status Bit of I2C0 and Unlocks Access to It" "0,1" bitfld.long 0x00 4. "PCNT2UNLOCK,Clears Status Bit of PCNT2 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 3. "PCNT1UNLOCK,Clears Status Bit of PCNT1 and Unlocks Access to It" "0,1" bitfld.long 0x00 2. "PCNT0UNLOCK,Clears Status Bit of PCNT0 and Unlocks Access to It" "0,1" newline bitfld.long 0x00 1. "ACMP1UNLOCK,Clears Status Bit of ACMP1 and Unlocks Access to It" "0,1" bitfld.long 0x00 0. "ACMP0UNLOCK,Clears Status Bit of ACMP0 and Unlocks Access to It" "0,1" endif sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") rgroup.long 0x104++0x03 line.long 0x00 "EM23PERNORETAINSTATUS,Status Indicating If Peripherals Were Powered Down in EM23 Subsequently Locking Access to It" bitfld.long 0x00 24. "USBLOCKED,Indicates If USB Powered Down During EM23" "0,1" bitfld.long 0x00 23. "RTCLOCKED,Indicates If RTC Powered Down During EM23" "0,1" newline bitfld.long 0x00 21. "ACMP2LOCKED,Indicates If ACMP2 Powered Down During EM23" "0,1" bitfld.long 0x00 20. "ADC1LOCKED,Indicates If ADC1 Powered Down During EM23" "0,1" newline bitfld.long 0x00 18. "LETIMER1LOCKED,Indicates If LETIMER1 Powered Down During EM23" "0,1" bitfld.long 0x00 17. "LCDLOCKED,Indicates If LCD Powered Down During EM23" "0,1" newline bitfld.long 0x00 16. "LEUART1LOCKED,Indicates If LEUART1 Powered Down During EM23" "0,1" bitfld.long 0x00 15. "LEUART0LOCKED,Indicates If LEUART0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 14. "CSENLOCKED,Indicates If CSEN Powered Down During EM23" "0,1" bitfld.long 0x00 13. "LESENSE0LOCKED,Indicates If LESENSE0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 12. "WDOG1LOCKED,Indicates If WDOG1 Powered Down During EM23" "0,1" bitfld.long 0x00 11. "WDOG0LOCKED,Indicates If WDOG0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 10. "LETIMER0LOCKED,Indicates If LETIMER0 Powered Down During EM23" "0,1" bitfld.long 0x00 9. "ADC0LOCKED,Indicates If ADC0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 8. "IDAC0LOCKED,Indicates If IDAC0 Powered Down During EM23" "0,1" bitfld.long 0x00 7. "DAC0LOCKED,Indicates If DAC0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 6. "I2C1LOCKED,Indicates If I2C1 Powered Down During EM23" "0,1" bitfld.long 0x00 5. "I2C0LOCKED,Indicates If I2C0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 4. "PCNT2LOCKED,Indicates If PCNT2 Powered Down During EM23" "0,1" bitfld.long 0x00 3. "PCNT1LOCKED,Indicates If PCNT1 Powered Down During EM23" "0,1" newline bitfld.long 0x00 2. "PCNT0LOCKED,Indicates If PCNT0 Powered Down During EM23" "0,1" bitfld.long 0x00 1. "ACMP1LOCKED,Indicates If ACMP1 Powered Down During EM23" "0,1" newline bitfld.long 0x00 0. "ACMP0LOCKED,Indicates If ACMP0 Powered Down During EM23" "0,1" endif sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") rgroup.long 0x104++0x03 line.long 0x00 "EM23PERNORETAINSTATUS,Status Indicating If Peripherals Were Powered Down in EM23 Subsequently Locking Access to It" bitfld.long 0x00 23. "RTCLOCKED,Indicates If RTC Powered Down During EM23" "0,1" bitfld.long 0x00 21. "ACMP2LOCKED,Indicates If ACMP2 Powered Down During EM23" "0,1" newline bitfld.long 0x00 20. "ADC1LOCKED,Indicates If ADC1 Powered Down During EM23" "0,1" bitfld.long 0x00 18. "LETIMER1LOCKED,Indicates If LETIMER1 Powered Down During EM23" "0,1" newline bitfld.long 0x00 17. "LCDLOCKED,Indicates If LCD Powered Down During EM23" "0,1" bitfld.long 0x00 16. "LEUART1LOCKED,Indicates If LEUART1 Powered Down During EM23" "0,1" newline bitfld.long 0x00 15. "LEUART0LOCKED,Indicates If LEUART0 Powered Down During EM23" "0,1" bitfld.long 0x00 14. "CSENLOCKED,Indicates If CSEN Powered Down During EM23" "0,1" newline bitfld.long 0x00 13. "LESENSE0LOCKED,Indicates If LESENSE0 Powered Down During EM23" "0,1" bitfld.long 0x00 12. "WDOG1LOCKED,Indicates If WDOG1 Powered Down During EM23" "0,1" newline bitfld.long 0x00 11. "WDOG0LOCKED,Indicates If WDOG0 Powered Down During EM23" "0,1" bitfld.long 0x00 10. "LETIMER0LOCKED,Indicates If LETIMER0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 9. "ADC0LOCKED,Indicates If ADC0 Powered Down During EM23" "0,1" bitfld.long 0x00 8. "IDAC0LOCKED,Indicates If IDAC0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 7. "DAC0LOCKED,Indicates If DAC0 Powered Down During EM23" "0,1" bitfld.long 0x00 6. "I2C1LOCKED,Indicates If I2C1 Powered Down During EM23" "0,1" newline bitfld.long 0x00 5. "I2C0LOCKED,Indicates If I2C0 Powered Down During EM23" "0,1" bitfld.long 0x00 4. "PCNT2LOCKED,Indicates If PCNT2 Powered Down During EM23" "0,1" newline bitfld.long 0x00 3. "PCNT1LOCKED,Indicates If PCNT1 Powered Down During EM23" "0,1" bitfld.long 0x00 2. "PCNT0LOCKED,Indicates If PCNT0 Powered Down During EM23" "0,1" newline bitfld.long 0x00 1. "ACMP1LOCKED,Indicates If ACMP1 Powered Down During EM23" "0,1" bitfld.long 0x00 0. "ACMP0LOCKED,Indicates If ACMP0 Powered Down During EM23" "0,1" endif sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0x108++0x03 line.long 0x00 "EM23PERNORETAINCTRL,When Set Corresponding Peripherals May Get Powered Down in EM23" bitfld.long 0x00 24. "USBDIS,Allow Power Down of USB During EM23" "0,1" bitfld.long 0x00 23. "RTCDIS,Allow Power Down of RTC During EM23" "0,1" newline bitfld.long 0x00 21. "ACMP2DIS,Allow Power Down of ACMP2 During EM23" "0,1" bitfld.long 0x00 20. "ADC1DIS,Allow Power Down of ADC1 During EM23" "0,1" newline bitfld.long 0x00 18. "LETIMER1DIS,Allow Power Down of LETIMER1 During EM23" "0,1" bitfld.long 0x00 17. "LCDDIS,Allow Power Down of LCD During EM23" "0,1" newline bitfld.long 0x00 16. "LEUART1DIS,Allow Power Down of LEUART1 During EM23" "0,1" bitfld.long 0x00 15. "LEUART0DIS,Allow Power Down of LEUART0 During EM23" "0,1" newline bitfld.long 0x00 14. "CSENDIS,Allow Power Down of CSEN During EM23" "0,1" bitfld.long 0x00 13. "LESENSE0DIS,Allow Power Down of LESENSE0 During EM23" "0,1" newline bitfld.long 0x00 12. "WDOG1DIS,Allow Power Down of WDOG1 During EM23" "0,1" bitfld.long 0x00 11. "WDOG0DIS,Allow Power Down of WDOG0 During EM23" "0,1" newline bitfld.long 0x00 10. "LETIMER0DIS,Allow Power Down of LETIMER0 During EM23" "0,1" bitfld.long 0x00 9. "ADC0DIS,Allow Power Down of ADC0 During EM23" "0,1" newline bitfld.long 0x00 8. "IDAC0DIS,Allow Power Down of IDAC0 During EM23" "0,1" bitfld.long 0x00 7. "VDAC0DIS,Allow Power Down of DAC0 During EM23" "0,1" newline bitfld.long 0x00 6. "I2C1DIS,Allow Power Down of I2C1 During EM23" "0,1" bitfld.long 0x00 5. "I2C0DIS,Allow Power Down of I2C0 During EM23" "0,1" newline bitfld.long 0x00 4. "PCNT2DIS,Allow Power Down of PCNT2 During EM23" "0,1" bitfld.long 0x00 3. "PCNT1DIS,Allow Power Down of PCNT1 During EM23" "0,1" newline bitfld.long 0x00 2. "PCNT0DIS,Allow Power Down of PCNT0 During EM23" "0,1" bitfld.long 0x00 1. "ACMP1DIS,Allow Power Down of ACMP1 During EM23" "0,1" newline bitfld.long 0x00 0. "ACMP0DIS,Allow Power Down of ACMP0 During EM23" "0,1" endif sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") group.long 0x108++0x03 line.long 0x00 "EM23PERNORETAINCTRL,When Set Corresponding Peripherals May Get Powered Down in EM23" bitfld.long 0x00 23. "RTCDIS,Allow Power Down of RTC During EM23" "0,1" bitfld.long 0x00 21. "ACMP2DIS,Allow Power Down of ACMP2 During EM23" "0,1" newline bitfld.long 0x00 20. "ADC1DIS,Allow Power Down of ADC1 During EM23" "0,1" bitfld.long 0x00 18. "LETIMER1DIS,Allow Power Down of LETIMER1 During EM23" "0,1" newline bitfld.long 0x00 17. "LCDDIS,Allow Power Down of LCD During EM23" "0,1" bitfld.long 0x00 16. "LEUART1DIS,Allow Power Down of LEUART1 During EM23" "0,1" newline bitfld.long 0x00 15. "LEUART0DIS,Allow Power Down of LEUART0 During EM23" "0,1" bitfld.long 0x00 14. "CSENDIS,Allow Power Down of CSEN During EM23" "0,1" newline bitfld.long 0x00 13. "LESENSE0DIS,Allow Power Down of LESENSE0 During EM23" "0,1" bitfld.long 0x00 12. "WDOG1DIS,Allow Power Down of WDOG1 During EM23" "0,1" newline bitfld.long 0x00 11. "WDOG0DIS,Allow Power Down of WDOG0 During EM23" "0,1" bitfld.long 0x00 10. "LETIMER0DIS,Allow Power Down of LETIMER0 During EM23" "0,1" newline bitfld.long 0x00 9. "ADC0DIS,Allow Power Down of ADC0 During EM23" "0,1" bitfld.long 0x00 8. "IDAC0DIS,Allow Power Down of IDAC0 During EM23" "0,1" newline bitfld.long 0x00 7. "VDAC0DIS,Allow Power Down of DAC0 During EM23" "0,1" bitfld.long 0x00 6. "I2C1DIS,Allow Power Down of I2C1 During EM23" "0,1" newline bitfld.long 0x00 5. "I2C0DIS,Allow Power Down of I2C0 During EM23" "0,1" bitfld.long 0x00 4. "PCNT2DIS,Allow Power Down of PCNT2 During EM23" "0,1" newline bitfld.long 0x00 3. "PCNT1DIS,Allow Power Down of PCNT1 During EM23" "0,1" bitfld.long 0x00 2. "PCNT0DIS,Allow Power Down of PCNT0 During EM23" "0,1" newline bitfld.long 0x00 1. "ACMP1DIS,Allow Power Down of ACMP1 During EM23" "0,1" bitfld.long 0x00 0. "ACMP0DIS,Allow Power Down of ACMP0 During EM23" "0,1" endif tree.end tree "ETM" base ad:0xE0041000 group.long 0x00++0x03 line.long 0x00 "ETMCR,Main Control Register" bitfld.long 0x00 28. "TSTAMPEN,Time Stamp Enable" "0,1" bitfld.long 0x00 21.--22. "EPORTSIZE,Port Size[3]" "0,1,2,3" newline bitfld.long 0x00 16.--17. "PORTMODE,Port Mode Control" "0,1,2,3" bitfld.long 0x00 13. "PORTMODE2,Port Mode[2]" "0,1" newline bitfld.long 0x00 11. "ETMPORTSEL,ETM Port Selection" "0,1" bitfld.long 0x00 10. "ETMPROG,ETM Programming" "0,1" newline bitfld.long 0x00 9. "DBGREQCTRL,Debug Request Control" "0,1" bitfld.long 0x00 8. "BRANCHOUTPUT,Branch Output" "0,1" newline bitfld.long 0x00 7. "STALL,Stall Processor" "0,1" bitfld.long 0x00 4.--6. "PORTSIZE,ETM Port Size" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0. "POWERDWN,ETM Control in low power mode" "0,1" rgroup.long 0x04++0x03 line.long 0x00 "ETMCCR,Configuration Code Register" bitfld.long 0x00 31. "ETMID,ETM ID Register Present" "0,1" bitfld.long 0x00 27. "MMACCESS,Coprocessor and Memeory Access" "0,1" newline bitfld.long 0x00 26. "TRACESS,Trace Start/Stop Block Present" "0,1" bitfld.long 0x00 24.--25. "IDCOMPNUM,Number of context ID Comparators" "0,1,2,3" newline bitfld.long 0x00 23. "FIFOFULLPRES,FIFIO FULL present" "0,1" bitfld.long 0x00 20.--22. "EXTOUTNUM,Number of External Output" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 17.--19. "EXTINPNUM,Number of External Inputs" "0: Zero inputs presents,1: One inputs presents,2: Two inputs presents,?..." bitfld.long 0x00 16. "SEQPRES,Sequencer Present" "0,1" newline bitfld.long 0x00 13.--15. "COUNTNUM,Number of Counters" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. "MMDECCNT,Number of Memeory Map Decoders" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "DATACMPNUM,Number of Data Value Comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "ADRCMPPAIR,Number of Address Comparator Pairs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x08++0x03 line.long 0x00 "ETMTRIGGER,ETM Trigger Event Register" bitfld.long 0x00 14.--16. "ETMFCN,ETM Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. "RESB,ETM Resource B" newline hexmask.long.byte 0x00 0.--6. 1. "RESA,ETM Resource A" group.long 0x10++0x03 line.long 0x00 "ETMSR,ETM Status Register" bitfld.long 0x00 3. "TRIGBIT,Trigger Bit" "0,1" bitfld.long 0x00 2. "TRACESTAT,Trace Start/Stop Status" "0,1" newline rbitfld.long 0x00 1. "ETMPROGBIT,ETM Programming Bit Status" "0,1" rbitfld.long 0x00 0. "ETHOF,ETM Overflow" "0,1" rgroup.long 0x14++0x03 line.long 0x00 "ETMSCR,ETM System Configuration Register" bitfld.long 0x00 17. "NOFETCHCOMP,No Fetch Comparison" "0,1" bitfld.long 0x00 12.--14. "PROCNUM,Number of Supported Processros" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. "PORTMODE,Port Mode Supported" "0,1" bitfld.long 0x00 10. "PORTSIZE,Port Size Supported" "0,1" newline bitfld.long 0x00 9. "MAXPORTSIZE3,Max Port Size[3]" "0,1" bitfld.long 0x00 8. "FIFOFULL,FIFO FULL Supported" "0,1" newline bitfld.long 0x00 0.--2. "MAXPORTSIZE,Maximum Port Size" "0,1,2,3,4,5,6,7" group.long 0x20++0x03 line.long 0x00 "ETMTEEVR,ETM TraceEnable Event Register" bitfld.long 0x00 14.--16. "ETMFCNEN,ETM Function Trace Enable" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. "RESB,ETM Resource B Trace Enable" newline hexmask.long.byte 0x00 0.--6. 1. "RESA,ETM Resource A Trace Enable" group.long 0x24++0x03 line.long 0x00 "ETMTECR1,ETM Trace control Register" bitfld.long 0x00 25. "TCE,Trace Control Enable" "0,1" bitfld.long 0x00 24. "INCEXCTL,Trace Include/Exclude Flag" "0,1" newline hexmask.long.word 0x00 8.--23. 1. "MEMMAP,Memmap" hexmask.long.byte 0x00 0.--7. 1. "ADRCMP,Address Comparator" group.long 0x2C++0x03 line.long 0x00 "ETMFFLR,ETM Fifo Full Level Register" hexmask.long.byte 0x00 0.--7. 1. "BYTENUM,Bytes left in FIFO" group.long 0x140++0x03 line.long 0x00 "ETMCNTRLDVR1,Counter Reload Value" hexmask.long.word 0x00 0.--15. 1. "COUNT,Free running counter reload value" group.long 0x1E0++0x03 line.long 0x00 "ETMSYNCFR,Synchronisation Frequency Register" hexmask.long.word 0x00 0.--11. 1. "FREQ,Synchronisation Frequency Value" rgroup.long 0x1E4++0x03 line.long 0x00 "ETMIDR,ID Register" hexmask.long.byte 0x00 24.--31. 1. "IMPCODE,Implementer Code" bitfld.long 0x00 20. "BPE,Branch Packet Encoding" "0,1" newline bitfld.long 0x00 19. "SECEXT,Security Extension Support" "0,1" bitfld.long 0x00 18. "THUMBT,32-bit Thumb Instruction Tracing" "0,1" newline bitfld.long 0x00 16. "LPCF,Load PC First" "0,1" bitfld.long 0x00 12.--15. "PROCFAM,Implementer Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 8.--11. "ETMMAJVER,Major ETM Architecture Version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. "ETMMINVER,Minor ETM Architecture Version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "IMPVER,Implementation Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x1E8++0x03 line.long 0x00 "ETMCCER,Configuration Code Extension Register" bitfld.long 0x00 29. "TSIZE,Timestamp Size" "0,1" bitfld.long 0x00 28. "TENC,Timestamp Encoding" "0,1" newline bitfld.long 0x00 27. "RFCNT,Reduced Function Counter" "0,1" bitfld.long 0x00 22. "TIMP,Timestamping Implemented" "0,1" newline bitfld.long 0x00 21. "EICEIMP,EmbeddedICE Behavior control Implemented" "0,1" bitfld.long 0x00 20. "TEICEWPNT,Trace Sart/Stop Block Uses EmbeddedICE watchpoint inputs" "0,1" newline bitfld.long 0x00 16.--19. "EICEWPNT,EmbeddedICE watchpoint inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 13.--15. "INSTRES,Instrumentation Resources" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12. "DADDRCMP,Data Address comparisons" "0,1" bitfld.long 0x00 11. "READREGS,Readable Registers" "0,1" newline hexmask.long.byte 0x00 3.--10. 1. "EXTINPBUS,Extended External Input Bus" bitfld.long 0x00 0.--1. "EXTINPSEL,Extended External Input Selectors" "0,1,2,3" group.long 0x1F0++0x03 line.long 0x00 "ETMTESSEICR,TraceEnable Start/Stop EmbeddedICE Control Register" bitfld.long 0x00 16.--19. "STOPRSEL,Stop Resource Selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "STARTRSEL,Stop Resource Selection" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1F8++0x03 line.long 0x00 "ETMTSEVR,Timestamp Event Register" bitfld.long 0x00 14.--16. "ETMFCNEVT,ETM Function Event" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. "RESBEVT,ETM Resource B Event" newline hexmask.long.byte 0x00 0.--6. 1. "RESAEVT,ETM Resource A Event" group.long 0x200++0x03 line.long 0x00 "ETMTRACEIDR,CoreSight Trace ID Register" hexmask.long.byte 0x00 0.--6. 1. "TRACEID,Trace ID" rgroup.long 0x208++0x03 line.long 0x00 "ETMIDR2,ETM ID Register 2" bitfld.long 0x00 1. "SWP,SWP Transfer Order" "0,1" bitfld.long 0x00 0. "RFE,RFE Transfer Order" "0,1" rgroup.long 0x314++0x03 line.long 0x00 "ETMPDSR,Device Power-down Status Register" bitfld.long 0x00 0. "ETMUP,ETM Powered Up" "0,1" group.long 0xEE0++0x03 line.long 0x00 "ETMISCIN,Integration Test Miscellaneous Inputs Register" bitfld.long 0x00 4. "COREHALT,Core Halt" "0,1" bitfld.long 0x00 0.--1. "EXTIN,EXTIN Value" "0,1,2,3" group.long 0xEE8++0x03 line.long 0x00 "ITTRIGOUT,Integration Test Trigger Out Register" bitfld.long 0x00 0. "TRIGGEROUT,Trigger output value" "0,1" rgroup.long 0xEF0++0x03 line.long 0x00 "ETMITATBCTR2,ETM Integration Test ATB Control 2 Register" bitfld.long 0x00 0. "ATREADY,ATREADY Input Value" "0,1" group.long 0xEF8++0x03 line.long 0x00 "ETMITATBCTR0,ETM Integration Test ATB Control 0 Register" bitfld.long 0x00 0. "ATVALID,ATVALID Output Value" "0,1" group.long 0xF00++0x03 line.long 0x00 "ETMITCTRL,ETM Integration Control Register" bitfld.long 0x00 0. "ITEN,Integration Mode Enable" "0,1" group.long 0xFA0++0x03 line.long 0x00 "ETMCLAIMSET,ETM Claim Tag Set Register" hexmask.long.byte 0x00 0.--7. 1. "SETTAG,Tag Bits" group.long 0xFA4++0x03 line.long 0x00 "ETMCLAIMCLR,ETM Claim Tag Clear Register" bitfld.long 0x00 0. "CLRTAG,Tag Bits" "0,1" group.long 0xFB0++0x03 line.long 0x00 "ETMLAR,ETM Lock Access Register" bitfld.long 0x00 0. "KEY,Key Value" "0,1" rgroup.long 0xFB4++0x03 line.long 0x00 "ETMLSR,Lock Status Register" bitfld.long 0x00 1. "LOCKED,ETM locked" "0,1" bitfld.long 0x00 0. "LOCKIMP,ETM Locking Implemented" "0,1" rgroup.long 0xFB8++0x03 line.long 0x00 "ETMAUTHSTATUS,ETM Authentication Status Register" bitfld.long 0x00 6.--7. "SECNONINVDBG,Secure non-invasive Debug Status" "0,1,2,3" bitfld.long 0x00 4.--5. "SECINVDBG,Secure invasive Debug Status" "0,1,2,3" newline bitfld.long 0x00 2.--3. "NONSECNONINVDBG,Non-secure non-invasive Debug Status" "?,?,2: Non-secure non-invasive debug disable,3: Non-secure non-invasive debug enable" bitfld.long 0x00 0.--1. "NONSECINVDBG,Non-secure invasive Debug Status" "0,1,2,3" rgroup.long 0xFCC++0x03 line.long 0x00 "ETMDEVTYPE,CoreSight Device Type Register" bitfld.long 0x00 4.--7. "PROCTRACE,Processor Trace" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "TRACESRC,Trace Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFD0++0x03 line.long 0x00 "ETMPIDR4,Peripheral ID4 Register" bitfld.long 0x00 4.--7. "COUNT,4KB Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CONTCODE,JEP106 Continuation Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" wgroup.long 0xFD4++0x03 line.long 0x00 "ETMPIDR5,Peripheral ID5 Register" wgroup.long 0xFD8++0x03 line.long 0x00 "ETMPIDR6,Peripheral ID6 Register" wgroup.long 0xFDC++0x03 line.long 0x00 "ETMPIDR7,Peripheral ID7 Register" rgroup.long 0xFE0++0x03 line.long 0x00 "ETMPIDR0,Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. "PARTNUM,Part Number" rgroup.long 0xFE4++0x03 line.long 0x00 "ETMPIDR1,Peripheral ID1 Register" bitfld.long 0x00 4.--7. "IDCODE,JEP106 Identity Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "PARTNUM,Part Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFE8++0x03 line.long 0x00 "ETMPIDR2,Peripheral ID2 Register" bitfld.long 0x00 4.--7. "REV,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. "ALWAYS1,Always 1" "0,1" newline bitfld.long 0x00 0.--2. "IDCODE,JEP106 Identity Code" "0,1,2,3,4,5,6,7" rgroup.long 0xFEC++0x03 line.long 0x00 "ETMPIDR3,Peripheral ID3 Register" bitfld.long 0x00 4.--7. "REVAND,RevAnd" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "CUSTMOD,Customer Modified" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xFF0++0x03 line.long 0x00 "ETMCIDR0,Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. "PREAMB,CoreSight Preamble" rgroup.long 0xFF4++0x03 line.long 0x00 "ETMCIDR1,Component ID1 Register" hexmask.long.byte 0x00 0.--7. 1. "PREAMB,CoreSight Preamble" rgroup.long 0xFF8++0x03 line.long 0x00 "ETMCIDR2,Component ID2 Register" hexmask.long.byte 0x00 0.--7. 1. "PREAMB,CoreSight Preamble" rgroup.long 0xFFC++0x03 line.long 0x00 "ETMCIDR3,Component ID3 Register" hexmask.long.byte 0x00 0.--7. 1. "PREAMB,CoreSight Preamble" tree.end tree "FPUEH" base ad:0x40001000 rgroup.long 0x00++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 5. "FPIXC,FPU inexact exception" "0,1" bitfld.long 0x00 4. "FPIDC,FPU input denormal exception" "0,1" newline bitfld.long 0x00 3. "FPOFC,FPU overflow exception" "0,1" bitfld.long 0x00 2. "FPUFC,FPU underflow exception" "0,1" newline bitfld.long 0x00 1. "FPDZC,FPU divide-by-zero exception" "0,1" bitfld.long 0x00 0. "FPIOC,FPU invalid operation" "0,1" wgroup.long 0x04++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 5. "FPIXC,Set FPIXC Interrupt Flag" "0,1" bitfld.long 0x00 4. "FPIDC,Set FPIDC Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "FPOFC,Set FPOFC Interrupt Flag" "0,1" bitfld.long 0x00 2. "FPUFC,Set FPUFC Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "FPDZC,Set FPDZC Interrupt Flag" "0,1" bitfld.long 0x00 0. "FPIOC,Set FPIOC Interrupt Flag" "0,1" wgroup.long 0x08++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 5. "FPIXC,Clear FPIXC Interrupt Flag" "0,1" bitfld.long 0x00 4. "FPIDC,Clear FPIDC Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "FPOFC,Clear FPOFC Interrupt Flag" "0,1" bitfld.long 0x00 2. "FPUFC,Clear FPUFC Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "FPDZC,Clear FPDZC Interrupt Flag" "0,1" bitfld.long 0x00 0. "FPIOC,Clear FPIOC Interrupt Flag" "0,1" group.long 0x0C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 5. "FPIXC,FPIXC Interrupt Enable" "0,1" bitfld.long 0x00 4. "FPIDC,FPIDC Interrupt Enable" "0,1" newline bitfld.long 0x00 3. "FPOFC,FPOFC Interrupt Enable" "0,1" bitfld.long 0x00 2. "FPUFC,FPUFC Interrupt Enable" "0,1" newline bitfld.long 0x00 1. "FPDZC,FPDZC Interrupt Enable" "0,1" bitfld.long 0x00 0. "FPIOC,FPIOC Interrupt Enable" "0,1" tree.end tree "GPCRC" base ad:0x4001C000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 13. "AUTOINIT,Auto Init Enable" "0,1" bitfld.long 0x00 10. "BYTEREVERSE,Byte Reverse Mode" "0,1" newline bitfld.long 0x00 9. "BITREVERSE,Byte-level Bit Reverse Enable" "0,1" bitfld.long 0x00 8. "BYTEMODE,Byte Mode Enable" "0,1" newline bitfld.long 0x00 4. "POLYSEL,Polynomial Select" "0,1" bitfld.long 0x00 0. "EN,CRC Functionality Enable" "0,1" wgroup.long 0x04++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 0. "INIT,Initialization Enable" "0,1" group.long 0x08++0x03 line.long 0x00 "INIT,CRC Init Value" hexmask.long 0x00 0.--31. 1. "INIT,CRC Initialization Value" group.long 0x0C++0x03 line.long 0x00 "POLY,CRC Polynomial Value" hexmask.long.word 0x00 0.--15. 1. "POLY,CRC Polynomial Value" group.long 0x10++0x03 line.long 0x00 "INPUTDATA,Input 32-bit Data Register" hexmask.long 0x00 0.--31. 1. "INPUTDATA,Input Data for 32-bit" group.long 0x14++0x03 line.long 0x00 "INPUTDATAHWORD,Input 16-bit Data Register" hexmask.long.word 0x00 0.--15. 1. "INPUTDATAHWORD,Input Data for 16-bit" group.long 0x18++0x03 line.long 0x00 "INPUTDATABYTE,Input 8-bit Data Register" hexmask.long.byte 0x00 0.--7. 1. "INPUTDATABYTE,Input Data for 8-bit" rgroup.long 0x1C++0x03 line.long 0x00 "DATA,CRC Data Register" hexmask.long 0x00 0.--31. 1. "DATA,CRC Data Register" rgroup.long 0x20++0x03 line.long 0x00 "DATAREV,CRC Data Reverse Register" hexmask.long 0x00 0.--31. 1. "DATAREV,Data Reverse Value" rgroup.long 0x24++0x03 line.long 0x00 "DATABYTEREV,CRC Data Byte Reverse Register" hexmask.long 0x00 0.--31. 1. "DATABYTEREV,Data Byte Reverse Value" tree.end tree "GPIO (General Purpose I/O Ports And Peripheral I/O Lines)" base ad:0x40088000 group.long 0x00++0x03 line.long 0x00 "PA_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x04++0x03 line.long 0x00 "PA_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x08++0x03 line.long 0x00 "PA_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x0C++0x03 line.long 0x00 "PA_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x18++0x03 line.long 0x00 "PA_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x1C++0x03 line.long 0x00 "PA_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x20++0x03 line.long 0x00 "PA_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x28++0x03 line.long 0x00 "PA_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x30++0x03 line.long 0x00 "PB_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x34++0x03 line.long 0x00 "PB_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x38++0x03 line.long 0x00 "PB_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x3C++0x03 line.long 0x00 "PB_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x48++0x03 line.long 0x00 "PB_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x4C++0x03 line.long 0x00 "PB_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x50++0x03 line.long 0x00 "PB_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x58++0x03 line.long 0x00 "PB_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x60++0x03 line.long 0x00 "PC_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x64++0x03 line.long 0x00 "PC_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x68++0x03 line.long 0x00 "PC_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x6C++0x03 line.long 0x00 "PC_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x78++0x03 line.long 0x00 "PC_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x7C++0x03 line.long 0x00 "PC_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x80++0x03 line.long 0x00 "PC_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x88++0x03 line.long 0x00 "PC_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x90++0x03 line.long 0x00 "PD_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x94++0x03 line.long 0x00 "PD_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x98++0x03 line.long 0x00 "PD_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x9C++0x03 line.long 0x00 "PD_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0xA8++0x03 line.long 0x00 "PD_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0xAC++0x03 line.long 0x00 "PD_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0xB0++0x03 line.long 0x00 "PD_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0xB8++0x03 line.long 0x00 "PD_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0xC0++0x03 line.long 0x00 "PE_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0xC4++0x03 line.long 0x00 "PE_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0xC8++0x03 line.long 0x00 "PE_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0xCC++0x03 line.long 0x00 "PE_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0xD8++0x03 line.long 0x00 "PE_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0xDC++0x03 line.long 0x00 "PE_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0xE0++0x03 line.long 0x00 "PE_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0xE8++0x03 line.long 0x00 "PE_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0xF0++0x03 line.long 0x00 "PF_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0xF4++0x03 line.long 0x00 "PF_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0xF8++0x03 line.long 0x00 "PF_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0xFC++0x03 line.long 0x00 "PF_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x108++0x03 line.long 0x00 "PF_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x10C++0x03 line.long 0x00 "PF_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x110++0x03 line.long 0x00 "PF_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x118++0x03 line.long 0x00 "PF_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x120++0x03 line.long 0x00 "PG_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x124++0x03 line.long 0x00 "PG_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x128++0x03 line.long 0x00 "PG_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x12C++0x03 line.long 0x00 "PG_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x138++0x03 line.long 0x00 "PG_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x13C++0x03 line.long 0x00 "PG_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x140++0x03 line.long 0x00 "PG_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x148++0x03 line.long 0x00 "PG_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x150++0x03 line.long 0x00 "PH_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x154++0x03 line.long 0x00 "PH_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x158++0x03 line.long 0x00 "PH_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x15C++0x03 line.long 0x00 "PH_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x168++0x03 line.long 0x00 "PH_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x16C++0x03 line.long 0x00 "PH_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x170++0x03 line.long 0x00 "PH_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x178++0x03 line.long 0x00 "PH_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x180++0x03 line.long 0x00 "PI_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x184++0x03 line.long 0x00 "PI_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x188++0x03 line.long 0x00 "PI_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x18C++0x03 line.long 0x00 "PI_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x198++0x03 line.long 0x00 "PI_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x19C++0x03 line.long 0x00 "PI_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x1A0++0x03 line.long 0x00 "PI_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x1A8++0x03 line.long 0x00 "PI_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x1B0++0x03 line.long 0x00 "PJ_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x1B4++0x03 line.long 0x00 "PJ_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x1B8++0x03 line.long 0x00 "PJ_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x1BC++0x03 line.long 0x00 "PJ_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x1C8++0x03 line.long 0x00 "PJ_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x1CC++0x03 line.long 0x00 "PJ_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x1D0++0x03 line.long 0x00 "PJ_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x1D8++0x03 line.long 0x00 "PJ_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x1E0++0x03 line.long 0x00 "PK_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x1E4++0x03 line.long 0x00 "PK_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x1E8++0x03 line.long 0x00 "PK_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x1EC++0x03 line.long 0x00 "PK_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x1F8++0x03 line.long 0x00 "PK_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x1FC++0x03 line.long 0x00 "PK_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x200++0x03 line.long 0x00 "PK_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x208++0x03 line.long 0x00 "PK_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x210++0x03 line.long 0x00 "PL_CTRL,Port Control Register" bitfld.long 0x00 28. "DINDISALT,Alternate Data in Disable" "0,1" bitfld.long 0x00 20.--22. "SLEWRATEALT,Alternate Slewrate Limit for Port" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. "DRIVESTRENGTHALT,Alternate Drive Strength for Port" "0,1" bitfld.long 0x00 12. "DINDIS,Data in Disable" "0,1" newline bitfld.long 0x00 4.--6. "SLEWRATE,Slewrate Limit for Port" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "DRIVESTRENGTH,Drive Strength for Port" "0,1" group.long 0x214++0x03 line.long 0x00 "PL_MODEL,Port Pin Mode Low Register" bitfld.long 0x00 28.--31. "MODE7,Pin 7 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE6,Pin 6 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE5,Pin 5 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE4,Pin 4 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE3,Pin 3 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE2,Pin 2 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE1,Pin 1 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE0,Pin 0 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x218++0x03 line.long 0x00 "PL_MODEH,Port Pin Mode High Register" bitfld.long 0x00 28.--31. "MODE15,Pin 15 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 24.--27. "MODE14,Pin 14 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 20.--23. "MODE13,Pin 13 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 16.--19. "MODE12,Pin 12 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 12.--15. "MODE11,Pin 11 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 8.--11. "MODE10,Pin 10 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." newline bitfld.long 0x00 4.--7. "MODE9,Pin 9 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." bitfld.long 0x00 0.--3. "MODE8,Pin 8 Mode" "0: Input disabled,1: Input enabled,2: Input enabled,3: Input enabled with filter,4: Push-pull output,5: Push-pull using alternate control,6: Wired-or output,7: Wired-or output with pull-down,8: Open-drain output,9: Open-drain output with filter,10: Open-drain output with pullup,11: Open-drain output with filter and pullup,12: Open-drain output using alternate control,13: Open-drain output using alternate control..,14: Open-drain output using alternate control..,15: Open-drain output using alternate control.." group.long 0x21C++0x03 line.long 0x00 "PL_DOUT,Port Data Out Register" hexmask.long.word 0x00 0.--15. 1. "DOUT,Data Out" wgroup.long 0x228++0x03 line.long 0x00 "PL_DOUTTGL,Port Data Out Toggle Register" hexmask.long.word 0x00 0.--15. 1. "DOUTTGL,Data Out Toggle" rgroup.long 0x22C++0x03 line.long 0x00 "PL_DIN,Port Data in Register" hexmask.long.word 0x00 0.--15. 1. "DIN,Data in" group.long 0x230++0x03 line.long 0x00 "PL_PINLOCKN,Port Unlocked Pins Register" hexmask.long.word 0x00 0.--15. 1. "PINLOCKN,Unlocked Pins" group.long 0x238++0x03 line.long 0x00 "PL_OVTDIS,Over Voltage Disable for All Modes" hexmask.long.word 0x00 0.--15. 1. "OVTDIS,Disable Over Voltage Capability" group.long 0x400++0x03 line.long 0x00 "EXTIPSELL,External Interrupt Port Select Low Register" bitfld.long 0x00 28.--31. "EXTIPSEL7,External Interrupt 7 Port Select" "0: Port A group selected for external interrupt 7,1: Port B group selected for external interrupt 7,2: Port C group selected for external interrupt 7,3: Port D group selected for external interrupt 7,4: Port E group selected for external interrupt 7,5: Port F group selected for external interrupt 7,?..." bitfld.long 0x00 24.--27. "EXTIPSEL6,External Interrupt 6 Port Select" "0: Port A group selected for external interrupt 6,1: Port B group selected for external interrupt 6,2: Port C group selected for external interrupt 6,3: Port D group selected for external interrupt 6,4: Port E group selected for external interrupt 6,5: Port F group selected for external interrupt 6,?..." newline bitfld.long 0x00 20.--23. "EXTIPSEL5,External Interrupt 5 Port Select" "0: Port A group selected for external interrupt 5,1: Port B group selected for external interrupt 5,2: Port C group selected for external interrupt 5,3: Port D group selected for external interrupt 5,4: Port E group selected for external interrupt 5,5: Port F group selected for external interrupt 5,?..." bitfld.long 0x00 16.--19. "EXTIPSEL4,External Interrupt 4 Port Select" "0: Port A group selected for external interrupt 4,1: Port B group selected for external interrupt 4,2: Port C group selected for external interrupt 4,3: Port D group selected for external interrupt 4,4: Port E group selected for external interrupt 4,5: Port F group selected for external interrupt 4,?..." newline bitfld.long 0x00 12.--15. "EXTIPSEL3,External Interrupt 3 Port Select" "0: Port A group selected for external interrupt 3,1: Port B group selected for external interrupt 3,2: Port C group selected for external interrupt 3,3: Port D group selected for external interrupt 3,4: Port E group selected for external interrupt 3,5: Port F group selected for external interrupt 3,?..." bitfld.long 0x00 8.--11. "EXTIPSEL2,External Interrupt 2 Port Select" "0: Port A group selected for external interrupt 2,1: Port B group selected for external interrupt 2,2: Port C group selected for external interrupt 2,3: Port D group selected for external interrupt 2,4: Port E group selected for external interrupt 2,5: Port F group selected for external interrupt 2,?..." newline bitfld.long 0x00 4.--7. "EXTIPSEL1,External Interrupt 1 Port Select" "0: Port A group selected for external interrupt 1,1: Port B group selected for external interrupt 1,2: Port C group selected for external interrupt 1,3: Port D group selected for external interrupt 1,4: Port E group selected for external interrupt 1,5: Port F group selected for external interrupt 1,?..." bitfld.long 0x00 0.--3. "EXTIPSEL0,External Interrupt 0 Port Select" "0: Port A group selected for external interrupt 0,1: Port B group selected for external interrupt 0,2: Port C group selected for external interrupt 0,3: Port D group selected for external interrupt 0,4: Port E group selected for external interrupt 0,5: Port F group selected for external interrupt 0,?..." group.long 0x404++0x03 line.long 0x00 "EXTIPSELH,External Interrupt Port Select High Register" bitfld.long 0x00 28.--31. "EXTIPSEL15,External Interrupt 15 Port Select" "0: Port A group selected for external interrupt 15,1: Port B group selected for external interrupt 15,2: Port C group selected for external interrupt 15,3: Port D group selected for external interrupt 15,4: Port E group selected for external interrupt 15,5: Port F group selected for external interrupt 15,?..." bitfld.long 0x00 24.--27. "EXTIPSEL14,External Interrupt 14 Port Select" "0: Port A group selected for external interrupt 14,1: Port B group selected for external interrupt 14,2: Port C group selected for external interrupt 14,3: Port D group selected for external interrupt 14,4: Port E group selected for external interrupt 14,5: Port F group selected for external interrupt 14,?..." newline bitfld.long 0x00 20.--23. "EXTIPSEL13,External Interrupt 13 Port Select" "0: Port A group selected for external interrupt 13,1: Port B group selected for external interrupt 13,2: Port C group selected for external interrupt 13,3: Port D group selected for external interrupt 13,4: Port E group selected for external interrupt 13,5: Port F group selected for external interrupt 13,?..." bitfld.long 0x00 16.--19. "EXTIPSEL12,External Interrupt 12 Port Select" "0: Port A group selected for external interrupt 12,1: Port B group selected for external interrupt 12,2: Port C group selected for external interrupt 12,3: Port D group selected for external interrupt 12,4: Port E group selected for external interrupt 12,5: Port F group selected for external interrupt 12,?..." newline bitfld.long 0x00 12.--15. "EXTIPSEL11,External Interrupt 11 Port Select" "0: Port A group selected for external interrupt 11,1: Port B group selected for external interrupt 11,2: Port C group selected for external interrupt 11,3: Port D group selected for external interrupt 11,4: Port E group selected for external interrupt 11,5: Port F group selected for external interrupt 11,?..." bitfld.long 0x00 8.--11. "EXTIPSEL10,External Interrupt 10 Port Select" "0: Port A group selected for external interrupt 10,1: Port B group selected for external interrupt 10,2: Port C group selected for external interrupt 10,3: Port D group selected for external interrupt 10,4: Port E group selected for external interrupt 10,5: Port F group selected for external interrupt 10,?..." newline bitfld.long 0x00 4.--7. "EXTIPSEL9,External Interrupt 9 Port Select" "0: Port A group selected for external interrupt 9,1: Port B group selected for external interrupt 9,2: Port C group selected for external interrupt 9,3: Port D group selected for external interrupt 9,4: Port E group selected for external interrupt 9,5: Port F group selected for external interrupt 9,?..." bitfld.long 0x00 0.--3. "EXTIPSEL8,External Interrupt 8 Port Select" "0: Port A group selected for external interrupt 8,1: Port B group selected for external interrupt 8,2: Port C group selected for external interrupt 8,3: Port D group selected for external interrupt 8,4: Port E group selected for external interrupt 8,5: Port F group selected for external interrupt 8,?..." group.long 0x408++0x03 line.long 0x00 "EXTIPINSELL,External Interrupt Pin Select Low Register" bitfld.long 0x00 28.--29. "EXTIPINSEL7,External Interrupt 7 Pin Select" "0: Pin 4,1: Pin 5,2: Pin 6,3: Pin 7" bitfld.long 0x00 24.--25. "EXTIPINSEL6,External Interrupt 6 Pin Select" "0: Pin 4,1: Pin 5,2: Pin 6,3: Pin 7" newline bitfld.long 0x00 20.--21. "EXTIPINSEL5,External Interrupt 5 Pin Select" "0: Pin 4,1: Pin 5,2: Pin 6,3: Pin 7" bitfld.long 0x00 16.--17. "EXTIPINSEL4,External Interrupt 4 Pin Select" "0: Pin 4,1: Pin 5,2: Pin 6,3: Pin 7" newline bitfld.long 0x00 12.--13. "EXTIPINSEL3,External Interrupt 3 Pin Select" "0: Pin 0,1: Pin 1,2: Pin 2,3: Pin 3" bitfld.long 0x00 8.--9. "EXTIPINSEL2,External Interrupt 2 Pin Select" "0: Pin 0,1: Pin 1,2: Pin 2,3: Pin 3" newline bitfld.long 0x00 4.--5. "EXTIPINSEL1,External Interrupt 1 Pin Select" "0: Pin 0,1: Pin 1,2: Pin 2,3: Pin 3" bitfld.long 0x00 0.--1. "EXTIPINSEL0,External Interrupt 0 Pin Select" "0: Pin 0,1: Pin 1,2: Pin 2,3: Pin 3" group.long 0x40C++0x03 line.long 0x00 "EXTIPINSELH,External Interrupt Pin Select High Register" bitfld.long 0x00 28.--29. "EXTIPINSEL15,External Interrupt 15 Pin Select" "0: Pin 12,1: Pin 13,2: Pin 14,3: Pin 15" bitfld.long 0x00 24.--25. "EXTIPINSEL14,External Interrupt 14 Pin Select" "0: Pin 12,1: Pin 13,2: Pin 14,3: Pin 15" newline bitfld.long 0x00 20.--21. "EXTIPINSEL13,External Interrupt 13 Pin Select" "0: Pin 12,1: Pin 13,2: Pin 14,3: Pin 15" bitfld.long 0x00 16.--17. "EXTIPINSEL12,External Interrupt 12 Pin Select" "0: Pin 12,1: Pin 13,2: Pin 14,3: Pin 15" newline bitfld.long 0x00 12.--13. "EXTIPINSEL11,External Interrupt 11 Pin Select" "0: Pin 8,1: Pin 9,2: Pin 10,3: Pin 11" bitfld.long 0x00 8.--9. "EXTIPINSEL10,External Interrupt 10 Pin Select" "0: Pin 8,1: Pin 9,2: Pin 10,3: Pin 11" newline bitfld.long 0x00 4.--5. "EXTIPINSEL9,External Interrupt 9 Pin Select" "0: Pin 8,1: Pin 9,2: Pin 10,3: Pin 11" bitfld.long 0x00 0.--1. "EXTIPINSEL8,External Interrupt 8 Pin Select" "0: Pin 8,1: Pin 9,2: Pin 10,3: Pin 11" group.long 0x410++0x03 line.long 0x00 "EXTIRISE,External Interrupt Rising Edge Trigger Register" hexmask.long.word 0x00 0.--15. 1. "EXTIRISE,External Interrupt N Rising Edge Trigger Enable" group.long 0x414++0x03 line.long 0x00 "EXTIFALL,External Interrupt Falling Edge Trigger Register" hexmask.long.word 0x00 0.--15. 1. "EXTIFALL,External Interrupt N Falling Edge Trigger Enable" group.long 0x418++0x03 line.long 0x00 "EXTILEVEL,External Interrupt Level Register" bitfld.long 0x00 25. "EM4WU9,EM4 Wake Up Level for EM4WU9 Pin" "0,1" bitfld.long 0x00 24. "EM4WU8,EM4 Wake Up Level for EM4WU8 Pin" "0,1" newline bitfld.long 0x00 23. "EM4WU7,EM4 Wake Up Level for EM4WU7 Pin" "0,1" bitfld.long 0x00 22. "EM4WU6,EM4 Wake Up Level for EM4WU6 Pin" "0,1" newline bitfld.long 0x00 21. "EM4WU5,EM4 Wake Up Level for EM4WU5 Pin" "0,1" bitfld.long 0x00 20. "EM4WU4,EM4 Wake Up Level for EM4WU4 Pin" "0,1" newline bitfld.long 0x00 19. "EM4WU3,EM4 Wake Up Level for EM4WU3 Pin" "0,1" bitfld.long 0x00 18. "EM4WU2,EM4 Wake Up Level for EM4WU2 Pin" "0,1" newline bitfld.long 0x00 17. "EM4WU1,EM4 Wake Up Level for EM4WU1 Pin" "0,1" bitfld.long 0x00 16. "EM4WU0,EM4 Wake Up Level for EM4WU0 Pin" "0,1" rgroup.long 0x41C++0x03 line.long 0x00 "IF,Interrupt Flag Register" hexmask.long.word 0x00 16.--31. 1. "EM4WU,EM4 Wake Up Pin Interrupt Flag" hexmask.long.word 0x00 0.--15. 1. "EXT,External Pin Interrupt Flag" wgroup.long 0x420++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" hexmask.long.word 0x00 16.--31. 1. "EM4WU,Set EM4WU Interrupt Flag" hexmask.long.word 0x00 0.--15. 1. "EXT,Set EXT Interrupt Flag" wgroup.long 0x424++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" hexmask.long.word 0x00 16.--31. 1. "EM4WU,Clear EM4WU Interrupt Flag" hexmask.long.word 0x00 0.--15. 1. "EXT,Clear EXT Interrupt Flag" group.long 0x428++0x03 line.long 0x00 "IEN,Interrupt Enable Register" hexmask.long.word 0x00 16.--31. 1. "EM4WU,EM4WU Interrupt Enable" hexmask.long.word 0x00 0.--15. 1. "EXT,EXT Interrupt Enable" group.long 0x42C++0x03 line.long 0x00 "EM4WUEN,EM4 Wake Up Enable Register" hexmask.long.word 0x00 16.--31. 1. "EM4WUEN,EM4 Wake Up Enable" group.long 0x440++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 20. "ETMTD3PEN,ETM Trace Data Pin Enable" "0,1" bitfld.long 0x00 19. "ETMTD2PEN,ETM Trace Data Pin Enable" "0,1" newline bitfld.long 0x00 18. "ETMTD1PEN,ETM Trace Data Pin Enable" "0,1" bitfld.long 0x00 17. "ETMTD0PEN,ETM Trace Data Pin Enable" "0,1" newline bitfld.long 0x00 16. "ETMTCLKPEN,ETM Trace Clock Pin Enable" "0,1" bitfld.long 0x00 4. "SWVPEN,Serial Wire Viewer Output Pin Enable" "0,1" newline bitfld.long 0x00 3. "TDIPEN,JTAG Test Debug Input Pin Enable" "0,1" bitfld.long 0x00 2. "TDOPEN,JTAG Test Debug Output Pin Enable" "0,1" newline bitfld.long 0x00 1. "SWDIOTMSPEN,Serial Wire Data and JTAG Test Mode Select Pin Enable" "0,1" bitfld.long 0x00 0. "SWCLKTCKPEN,Serial Wire Clock and JTAG Test Clock Pin Enable" "0,1" group.long 0x444++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 6.--11. "ETMLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." bitfld.long 0x00 0.--5. "SWVLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." group.long 0x450++0x03 line.long 0x00 "INSENSE,Input Sense Register" bitfld.long 0x00 1. "EM4WU,EM4WU Interrupt Sense Enable" "0,1" bitfld.long 0x00 0. "INT,Interrupt Sense Enable" "0,1" group.long 0x454++0x03 line.long 0x00 "LOCK,Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,Configuration Lock Key" tree.end tree "I2C (Inter-Integrated Circuit)" repeat 2. (list 0. 1.) (list ad:0x40089000 ad:0x40089400) tree "I2C$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 16.--18. "CLTO,Clock Low Timeout" "0: Timeout disabled,1: Timeout after 40 prescaled clock cycles,2: Timeout after 80 prescaled clock cycles,3: Timeout after 160 prescaled clock cycles,4: Timeout after 320 prescaled clock cycles,5: Timeout after 1024 prescaled clock cycles,?..." bitfld.long 0x00 15. "GIBITO,Go Idle on Bus Idle Timeout" "0,1" newline bitfld.long 0x00 12.--13. "BITO,Bus Idle Timeout" "0: Timeout disabled,1: Timeout after 40 prescaled clock cycles,2: Timeout after 80 prescaled clock cycles,3: Timeout after 160 prescaled clock cycles" bitfld.long 0x00 8.--9. "CLHR,Clock Low High Ratio" "0: The ratio between low period and high period..,1: The ratio between low period and high period..,2: The ratio between low period and high period..,?..." newline bitfld.long 0x00 7. "TXBIL,TX Buffer Interrupt Level" "0,1" bitfld.long 0x00 6. "GCAMEN,General Call Address Match Enable" "0,1" newline bitfld.long 0x00 5. "ARBDIS,Arbitration Disable" "0,1" bitfld.long 0x00 4. "AUTOSN,Automatic STOP on NACK" "0,1" newline bitfld.long 0x00 3. "AUTOSE,Automatic STOP When Empty" "0,1" bitfld.long 0x00 2. "AUTOACK,Automatic Acknowledge" "0,1" newline bitfld.long 0x00 1. "SLAVE,Addressable as Slave" "0,1" bitfld.long 0x00 0. "EN,I2C Enable" "0,1" wgroup.long 0x04++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 7. "CLEARPC,Clear Pending Commands" "0,1" bitfld.long 0x00 6. "CLEARTX,Clear TX" "0,1" newline bitfld.long 0x00 5. "ABORT,Abort Transmission" "0,1" bitfld.long 0x00 4. "CONT,Continue Transmission" "0,1" newline bitfld.long 0x00 3. "NACK,Send NACK" "0,1" bitfld.long 0x00 2. "ACK,Send ACK" "0,1" newline bitfld.long 0x00 1. "STOP,Send Stop Condition" "0,1" bitfld.long 0x00 0. "START,Send Start Condition" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "STATE,State Register" bitfld.long 0x00 5.--7. "STATE,Transmission State" "0: No transmission is being performed,1: Waiting for idle,2: Start transmitted or received,3: Address transmitted or received,4: Address ack/nack transmitted or received,5: Data transmitted or received,6: Data ack/nack transmitted or received,?..." bitfld.long 0x00 4. "BUSHOLD,Bus Held" "0,1" newline bitfld.long 0x00 3. "NACKED,Nack Received" "0,1" bitfld.long 0x00 2. "TRANSMITTER,Transmitter" "0,1" newline bitfld.long 0x00 1. "MASTER,Master" "0,1" bitfld.long 0x00 0. "BUSY,Bus Busy" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 9. "RXFULL,RX FIFO Full" "0,1" bitfld.long 0x00 8. "RXDATAV,RX Data Valid" "0,1" newline bitfld.long 0x00 7. "TXBL,TX Buffer Level" "0,1" bitfld.long 0x00 6. "TXC,TX Complete" "0,1" newline bitfld.long 0x00 5. "PABORT,Pending Abort" "0,1" bitfld.long 0x00 4. "PCONT,Pending Continue" "0,1" newline bitfld.long 0x00 3. "PNACK,Pending NACK" "0,1" bitfld.long 0x00 2. "PACK,Pending ACK" "0,1" newline bitfld.long 0x00 1. "PSTOP,Pending STOP" "0,1" bitfld.long 0x00 0. "PSTART,Pending START" "0,1" group.long 0x10++0x03 line.long 0x00 "CLKDIV,Clock Division Register" hexmask.long.word 0x00 0.--8. 1. "DIV,Clock Divider" group.long 0x14++0x03 line.long 0x00 "SADDR,Slave Address Register" hexmask.long.byte 0x00 1.--7. 1. "ADDR,Slave Address" group.long 0x18++0x03 line.long 0x00 "SADDRMASK,Slave Address Mask Register" hexmask.long.byte 0x00 1.--7. 1. "MASK,Slave Address Mask" rgroup.long 0x1C++0x03 line.long 0x00 "RXDATA,Receive Buffer Data Register" hexmask.long.byte 0x00 0.--7. 1. "RXDATA,RX Data" rgroup.long 0x20++0x03 line.long 0x00 "RXDOUBLE,Receive Buffer Double Data Register" hexmask.long.byte 0x00 8.--15. 1. "RXDATA1,RX Data 1" hexmask.long.byte 0x00 0.--7. 1. "RXDATA0,RX Data 0" rgroup.long 0x24++0x03 line.long 0x00 "RXDATAP,Receive Buffer Data Peek Register" hexmask.long.byte 0x00 0.--7. 1. "RXDATAP,RX Data Peek" rgroup.long 0x28++0x03 line.long 0x00 "RXDOUBLEP,Receive Buffer Double Data Peek Register" hexmask.long.byte 0x00 8.--15. 1. "RXDATAP1,RX Data 1 Peek" hexmask.long.byte 0x00 0.--7. 1. "RXDATAP0,RX Data 0 Peek" group.long 0x2C++0x03 line.long 0x00 "TXDATA,Transmit Buffer Data Register" hexmask.long.byte 0x00 0.--7. 1. "TXDATA,TX Data" group.long 0x30++0x03 line.long 0x00 "TXDOUBLE,Transmit Buffer Double Data Register" hexmask.long.byte 0x00 8.--15. 1. "TXDATA1,TX Data" hexmask.long.byte 0x00 0.--7. 1. "TXDATA0,TX Data" rgroup.long 0x34++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 18. "CLERR,Clock Low Error Interrupt Flag" "0,1" bitfld.long 0x00 17. "RXFULL,Receive Buffer Full Interrupt Flag" "0,1" newline bitfld.long 0x00 16. "SSTOP,Slave STOP Condition Interrupt Flag" "0,1" bitfld.long 0x00 15. "CLTO,Clock Low Timeout Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "BITO,Bus Idle Timeout Interrupt Flag" "0,1" bitfld.long 0x00 13. "RXUF,Receive Buffer Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "TXOF,Transmit Buffer Overflow Interrupt Flag" "0,1" bitfld.long 0x00 11. "BUSHOLD,Bus Held Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "BUSERR,Bus Error Interrupt Flag" "0,1" bitfld.long 0x00 9. "ARBLOST,Arbitration Lost Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "MSTOP,Master STOP Condition Interrupt Flag" "0,1" bitfld.long 0x00 7. "NACK,Not Acknowledge Received Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "ACK,Acknowledge Received Interrupt Flag" "0,1" bitfld.long 0x00 5. "RXDATAV,Receive Data Valid Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "TXBL,Transmit Buffer Level Interrupt Flag" "0,1" bitfld.long 0x00 3. "TXC,Transfer Completed Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "ADDR,Address Interrupt Flag" "0,1" bitfld.long 0x00 1. "RSTART,Repeated START Condition Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "START,START Condition Interrupt Flag" "0,1" wgroup.long 0x38++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 18. "CLERR,Set CLERR Interrupt Flag" "0,1" bitfld.long 0x00 17. "RXFULL,Set RXFULL Interrupt Flag" "0,1" newline bitfld.long 0x00 16. "SSTOP,Set SSTOP Interrupt Flag" "0,1" bitfld.long 0x00 15. "CLTO,Set CLTO Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "BITO,Set BITO Interrupt Flag" "0,1" bitfld.long 0x00 13. "RXUF,Set RXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "TXOF,Set TXOF Interrupt Flag" "0,1" bitfld.long 0x00 11. "BUSHOLD,Set BUSHOLD Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "BUSERR,Set BUSERR Interrupt Flag" "0,1" bitfld.long 0x00 9. "ARBLOST,Set ARBLOST Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "MSTOP,Set MSTOP Interrupt Flag" "0,1" bitfld.long 0x00 7. "NACK,Set NACK Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "ACK,Set ACK Interrupt Flag" "0,1" bitfld.long 0x00 3. "TXC,Set TXC Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "ADDR,Set ADDR Interrupt Flag" "0,1" bitfld.long 0x00 1. "RSTART,Set RSTART Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "START,Set START Interrupt Flag" "0,1" wgroup.long 0x3C++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 18. "CLERR,Clear CLERR Interrupt Flag" "0,1" bitfld.long 0x00 17. "RXFULL,Clear RXFULL Interrupt Flag" "0,1" newline bitfld.long 0x00 16. "SSTOP,Clear SSTOP Interrupt Flag" "0,1" bitfld.long 0x00 15. "CLTO,Clear CLTO Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "BITO,Clear BITO Interrupt Flag" "0,1" bitfld.long 0x00 13. "RXUF,Clear RXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "TXOF,Clear TXOF Interrupt Flag" "0,1" bitfld.long 0x00 11. "BUSHOLD,Clear BUSHOLD Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "BUSERR,Clear BUSERR Interrupt Flag" "0,1" bitfld.long 0x00 9. "ARBLOST,Clear ARBLOST Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "MSTOP,Clear MSTOP Interrupt Flag" "0,1" bitfld.long 0x00 7. "NACK,Clear NACK Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "ACK,Clear ACK Interrupt Flag" "0,1" bitfld.long 0x00 3. "TXC,Clear TXC Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "ADDR,Clear ADDR Interrupt Flag" "0,1" bitfld.long 0x00 1. "RSTART,Clear RSTART Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "START,Clear START Interrupt Flag" "0,1" group.long 0x40++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 18. "CLERR,CLERR Interrupt Enable" "0,1" bitfld.long 0x00 17. "RXFULL,RXFULL Interrupt Enable" "0,1" newline bitfld.long 0x00 16. "SSTOP,SSTOP Interrupt Enable" "0,1" bitfld.long 0x00 15. "CLTO,CLTO Interrupt Enable" "0,1" newline bitfld.long 0x00 14. "BITO,BITO Interrupt Enable" "0,1" bitfld.long 0x00 13. "RXUF,RXUF Interrupt Enable" "0,1" newline bitfld.long 0x00 12. "TXOF,TXOF Interrupt Enable" "0,1" bitfld.long 0x00 11. "BUSHOLD,BUSHOLD Interrupt Enable" "0,1" newline bitfld.long 0x00 10. "BUSERR,BUSERR Interrupt Enable" "0,1" bitfld.long 0x00 9. "ARBLOST,ARBLOST Interrupt Enable" "0,1" newline bitfld.long 0x00 8. "MSTOP,MSTOP Interrupt Enable" "0,1" bitfld.long 0x00 7. "NACK,NACK Interrupt Enable" "0,1" newline bitfld.long 0x00 6. "ACK,ACK Interrupt Enable" "0,1" bitfld.long 0x00 5. "RXDATAV,RXDATAV Interrupt Enable" "0,1" newline bitfld.long 0x00 4. "TXBL,TXBL Interrupt Enable" "0,1" bitfld.long 0x00 3. "TXC,TXC Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "ADDR,ADDR Interrupt Enable" "0,1" bitfld.long 0x00 1. "RSTART,RSTART Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "START,START Interrupt Enable" "0,1" group.long 0x44++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 1. "SCLPEN,SCL Pin Enable" "0,1" bitfld.long 0x00 0. "SDAPEN,SDA Pin Enable" "0,1" group.long 0x48++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 8.--13. "SCLLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." bitfld.long 0x00 0.--5. "SDALOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." tree.end repeat.end tree.end tree "IDAC0" base ad:0x40084000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 20.--23. "PRSSEL,IDAC Output Enable PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" bitfld.long 0x00 19. "MAINOUTENPRS,PRS Controlled Main Pad Output Enable" "0,1" newline bitfld.long 0x00 18. "MAINOUTEN,Output Enable" "0,1" bitfld.long 0x00 16. "APORTOUTENPRS,PRS Controlled APORT Output Enable" "0,1" newline bitfld.long 0x00 14. "APORTMASTERDIS,APORT Bus Master Disable" "0,1" bitfld.long 0x00 13. "EM2DELAY,EM2 Delay" "0,1" newline bitfld.long 0x00 12. "PWRSEL,Power Select" "0,1" hexmask.long.byte 0x00 4.--11. 1. "APORTOUTSEL,APORT Output Select" newline bitfld.long 0x00 3. "APORTOUTEN,APORT Output Enable" "0,1" bitfld.long 0x00 2. "MINOUTTRANS,Minimum Output Transition Enable" "0,1" newline bitfld.long 0x00 1. "CURSINK,Current Sink Enable" "0,1" bitfld.long 0x00 0. "EN,Current DAC Enable" "0,1" group.long 0x04++0x03 line.long 0x00 "CURPROG,Current Programming Register" hexmask.long.byte 0x00 16.--23. 1. "TUNING,Tune the Current to Given Accuracy" bitfld.long 0x00 8.--12. "STEPSEL,Current Step Size Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--1. "RANGESEL,Current Range Select" "0: Current range set to 0 - 1.6 uA,1: Current range set to 1.6 - 4.7 uA,2: Current range set to 0.5 - 16 uA,3: Current range set to 2 - 64 uA" group.long 0x0C++0x03 line.long 0x00 "DUTYCONFIG,Duty Cycle Configuration Register" bitfld.long 0x00 1. "EM2DUTYCYCLEDIS,Duty Cycle Enable" "0,1" rgroup.long 0x18++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 1. "APORTCONFLICT,APORT Conflict Output" "0,1" bitfld.long 0x00 0. "CURSTABLE,IDAC Output Current Stable" "0,1" rgroup.long 0x20++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 1. "APORTCONFLICT,APORT Conflict Interrupt Flag" "0,1" bitfld.long 0x00 0. "CURSTABLE,Edge Triggered Interrupt Flag" "0,1" wgroup.long 0x24++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 1. "APORTCONFLICT,Set APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 0. "CURSTABLE,Set CURSTABLE Interrupt Flag" "0,1" wgroup.long 0x28++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 1. "APORTCONFLICT,Clear APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 0. "CURSTABLE,Clear CURSTABLE Interrupt Flag" "0,1" group.long 0x2C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 1. "APORTCONFLICT,APORTCONFLICT Interrupt Enable" "0,1" bitfld.long 0x00 0. "CURSTABLE,CURSTABLE Interrupt Enable" "0,1" rgroup.long 0x34++0x03 line.long 0x00 "APORTREQ,APORT Request Status Register" bitfld.long 0x00 3. "APORT1YREQ,1 If the Bus Connected to APORT1Y is Requested" "0,1" bitfld.long 0x00 2. "APORT1XREQ,1 If the APORT Bus Connected to APORT1X is Requested" "0,1" rgroup.long 0x38++0x03 line.long 0x00 "APORTCONFLICT,APORT Request Status Register" bitfld.long 0x00 3. "APORT1YCONFLICT,1 If the Bus Connected to APORT1Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 2. "APORT1XCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" tree.end sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512GL112")||cpuis("EFM32GG12B530F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") tree "LCD" base ad:0x40054000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 23. "DSC,Direct Segment Control" "0,1" bitfld.long 0x00 1.--2. "UDCTRL,Update Data Control" "0: The data transfer is controlled by SW,1: The data transfer is done at the next event..,2: The data transfer is done continuously at..,?..." newline bitfld.long 0x00 0. "EN,LCD Enable" "0,1" group.long 0x04++0x03 line.long 0x00 "DISPCTRL,Display Control Register" bitfld.long 0x00 28.--29. "MODE,Mode Setting" "0: No External Cap,1: Use step down control with VLCD less than VDD,2: Charge pump used with internal oscillator,?..." bitfld.long 0x00 24.--25. "BIAS,Bias Configuration" "0: STATIC,1: 1/2 Bias,2: ONETHIRD,3: ONEFOURTH" newline bitfld.long 0x00 20.--22. "CHGRDST,Charge Redistribution Cycles" "0: Disable charge redistribution,1: Use 1 prescaled low frequency clock cycle for..,2: Use 2 prescaled low frequency clock cycles..,3: Use 3 prescaled low frequency clock cycles..,4: Use 4 prescaled low frequency clock cycles..,?..." bitfld.long 0x00 8.--13. "CONTRAST,Contrast Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 4. "WAVE,Waveform Selection" "0,1" bitfld.long 0x00 0.--2. "MUX,Mux Configuration" "0: STATIC,1: DUPLEX,2: TRIPLEX,3: QUADRUPLEX,?,5: SEXTAPLEX,?,7: OCTAPLEX" group.long 0x08++0x03 line.long 0x00 "SEGEN,Segment Enable Register" hexmask.long 0x00 0.--31. 1. "SEGEN,Segment Enable" group.long 0x0C++0x03 line.long 0x00 "BACTRL,Blink and Animation Control Register" bitfld.long 0x00 28. "ALOC,Animation Location" "0,1" bitfld.long 0x00 18.--23. "FCTOP,Frame Counter Top Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16.--17. "FCPRESC,Frame Counter Prescaler" "0: CLKFC = CLKFRAME / 1,1: CLKFC = CLKFRAME / 2,2: CLKFC = CLKFRAME / 4,3: CLKFC = CLKFRAME / 8" bitfld.long 0x00 8. "FCEN,Frame Counter Enable" "0,1" newline bitfld.long 0x00 7. "ALOGSEL,Animate Logic Function Select" "0,1" bitfld.long 0x00 5.--6. "AREGBSC,Animate Register B Shift Control" "0: No Shift operation on Animation Register B,1: Animation Register B is shifted left,2: Animation Register B is shifted right,?..." newline bitfld.long 0x00 3.--4. "AREGASC,Animate Register a Shift Control" "0: No Shift operation on Animation Register A,1: Animation Register A is shifted left,2: Animation Register A is shifted right,?..." bitfld.long 0x00 2. "AEN,Animation Enable" "0,1" newline bitfld.long 0x00 1. "BLANK,Blank Display" "0,1" bitfld.long 0x00 0. "BLINKEN,Blink Enable" "0,1" rgroup.long 0x10++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 8. "BLINK,Blink State" "0,1" bitfld.long 0x00 0.--3. "ASTATE,Current Animation State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x14++0x03 line.long 0x00 "AREGA,Animation Register a" hexmask.long.byte 0x00 0.--7. 1. "AREGA,Animation Register a Data" group.long 0x18++0x03 line.long 0x00 "AREGB,Animation Register B" hexmask.long.byte 0x00 0.--7. 1. "AREGB,Animation Register B Data" rgroup.long 0x1C++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 0. "FC,Frame Counter Interrupt Flag" "0,1" wgroup.long 0x20++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 0. "FC,Frame Counter Interrupt Flag Set" "0,1" wgroup.long 0x24++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 0. "FC,Frame Counter Interrupt Flag Clear" "0,1" group.long 0x28++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 0. "FC,Frame Counter Interrupt Enable" "0,1" group.long 0x30++0x03 line.long 0x00 "BIASCTRL,Analog BIAS Control" bitfld.long 0x00 10.--12. "BUFBIAS,Buffer Bias Setting" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--7. "BUFDRV,Buffer Drive Strength" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--2. "SPEED,SPEED Adjustment" "0,1,2,3,4,5,6,7" group.long 0x40++0x03 line.long 0x00 "SEGD0L,Segment Data Low Register 0" hexmask.long 0x00 0.--31. 1. "SEGD0L,COM0 Segment Data Low" group.long 0x44++0x03 line.long 0x00 "SEGD1L,Segment Data Low Register 1" hexmask.long 0x00 0.--31. 1. "SEGD1L,COM1 Segment Data Low" group.long 0x48++0x03 line.long 0x00 "SEGD2L,Segment Data Low Register 2" hexmask.long 0x00 0.--31. 1. "SEGD2L,COM2 Segment Data Low" group.long 0x4C++0x03 line.long 0x00 "SEGD3L,Segment Data Low Register 3" hexmask.long 0x00 0.--31. 1. "SEGD3L,COM3 Segment Data Low" group.long 0x50++0x03 line.long 0x00 "SEGD0H,Segment Data High Register 0" hexmask.long.byte 0x00 0.--7. 1. "SEGD0H,COM0 Segment Data High" group.long 0x54++0x03 line.long 0x00 "SEGD1H,Segment Data High Register 1" hexmask.long.byte 0x00 0.--7. 1. "SEGD1H,COM1 Segment Data High" group.long 0x58++0x03 line.long 0x00 "SEGD2H,Segment Data High Register 2" hexmask.long.byte 0x00 0.--7. 1. "SEGD2H,COM2 Segment Data High" group.long 0x5C++0x03 line.long 0x00 "SEGD3H,Segment Data High Register 3" hexmask.long.byte 0x00 0.--7. 1. "SEGD3H,COM3 Segment Data High" group.long 0x60++0x03 line.long 0x00 "SEGD4L,Segment Data Low Register 4" hexmask.long 0x00 0.--31. 1. "SEGD4L,COM4 Segment Data" group.long 0x64++0x03 line.long 0x00 "SEGD5L,Segment Data Low Register 5" hexmask.long 0x00 0.--31. 1. "SEGD5L,COM5 Segment Data" group.long 0x68++0x03 line.long 0x00 "SEGD6L,Segment Data Low Register 6" hexmask.long 0x00 0.--31. 1. "SEGD6L,COM6 Segment Data" group.long 0x6C++0x03 line.long 0x00 "SEGD7L,Segment Data Low Register 7" hexmask.long 0x00 0.--31. 1. "SEGD7L,COM7 Segment Data" group.long 0x70++0x03 line.long 0x00 "SEGD4H,Segment Data High Register 4" hexmask.long.byte 0x00 0.--7. 1. "SEGD4H,COM0 Segment Data High" group.long 0x74++0x03 line.long 0x00 "SEGD5H,Segment Data High Register 5" hexmask.long.byte 0x00 0.--7. 1. "SEGD5H,COM1 Segment Data High" group.long 0x78++0x03 line.long 0x00 "SEGD6H,Segment Data High Register 6" hexmask.long.byte 0x00 0.--7. 1. "SEGD6H,COM2 Segment Data High" group.long 0x7C++0x03 line.long 0x00 "SEGD7H,Segment Data High Register 7" hexmask.long.byte 0x00 0.--7. 1. "SEGD7H,COM3 Segment Data High" group.long 0xC0++0x03 line.long 0x00 "FREEZE,Freeze Register" bitfld.long 0x00 1. "LCDGATE,LCD Gate" "0,1" bitfld.long 0x00 0. "REGFREEZE,Register Update Freeze" "0,1" rgroup.long 0xC4++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 19. "SEGD7H,SEGD7H Register Busy" "0,1" bitfld.long 0x00 18. "SEGD6H,SEGD6H Register Busy" "0,1" newline bitfld.long 0x00 17. "SEGD5H,SEGD5H Register Busy" "0,1" bitfld.long 0x00 16. "SEGD4H,SEGD4H Register Busy" "0,1" newline bitfld.long 0x00 15. "SEGD7L,SEGD7L Register Busy" "0,1" bitfld.long 0x00 14. "SEGD6L,SEGD6L Register Busy" "0,1" newline bitfld.long 0x00 13. "SEGD5L,SEGD5L Register Busy" "0,1" bitfld.long 0x00 12. "SEGD4L,SEGD4L Register Busy" "0,1" newline bitfld.long 0x00 11. "SEGD3H,SEGD3H Register Busy" "0,1" bitfld.long 0x00 10. "SEGD2H,SEGD2H Register Busy" "0,1" newline bitfld.long 0x00 9. "SEGD1H,SEGD1H Register Busy" "0,1" bitfld.long 0x00 8. "SEGD0H,SEGD0H Register Busy" "0,1" newline bitfld.long 0x00 7. "SEGD3L,SEGD3L Register Busy" "0,1" bitfld.long 0x00 6. "SEGD2L,SEGD2L Register Busy" "0,1" newline bitfld.long 0x00 5. "SEGD1L,SEGD1L Register Busy" "0,1" bitfld.long 0x00 4. "SEGD0L,SEGD0L Register Busy" "0,1" newline bitfld.long 0x00 3. "AREGB,AREGB Register Busy" "0,1" bitfld.long 0x00 2. "AREGA,AREGA Register Busy" "0,1" newline bitfld.long 0x00 1. "BACTRL,BACTRL Register Busy" "0,1" bitfld.long 0x00 0. "CTRL,CTRL Register Busy" "0,1" group.long 0xF0++0x03 line.long 0x00 "FRAMERATE,Frame Rate" hexmask.long.word 0x00 0.--8. 1. "FRDIV,Frame Rate Divider" group.long 0xF4++0x03 line.long 0x00 "SEGEN2,Segment Enable (32 to 39)" hexmask.long.byte 0x00 0.--7. 1. "SEGEN2,Segment Enable (second Group)" tree.end endif tree "LDMA" base ad:0x40002000 group.long 0x00++0x03 line.long 0x00 "CTRL,DMA Control Register" bitfld.long 0x00 24.--27. "NUMFIXED,Number of Fixed Priority Channels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. "SYNCPRSCLREN,Synchronization PRS Clear Enable" newline hexmask.long.byte 0x00 0.--7. 1. "SYNCPRSSETEN,Synchronization PRS Set Enable" rgroup.long 0x04++0x03 line.long 0x00 "STATUS,DMA Status Register" bitfld.long 0x00 24.--28. "CHNUM,Number of Channels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--20. "FIFOLEVEL,FIFO Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 8.--11. "CHERROR,Errant Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3.--6. "CHGRANT,Granted Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 1. "ANYREQ,Any DMA Channel Request Pending" "0,1" bitfld.long 0x00 0. "ANYBUSY,Any DMA Channel Busy" "0,1" group.long 0x08++0x03 line.long 0x00 "SYNC,DMA Synchronization Trigger Register (Single-Cycle RMW)" hexmask.long.byte 0x00 0.--7. 1. "SYNCTRIG,Synchronization Trigger" group.long 0x20++0x03 line.long 0x00 "CHEN,DMA Channel Enable Register (Single-Cycle RMW)" hexmask.long.word 0x00 0.--11. 1. "CHEN,Channel Enables" rgroup.long 0x24++0x03 line.long 0x00 "CHBUSY,DMA Channel Busy Register" hexmask.long.word 0x00 0.--11. 1. "BUSY,Channels Busy" group.long 0x28++0x03 line.long 0x00 "CHDONE,DMA Channel Linking Done Register (Single-Cycle RMW)" hexmask.long.word 0x00 0.--11. 1. "CHDONE,DMA Channel Linking or Done" group.long 0x2C++0x03 line.long 0x00 "DBGHALT,DMA Channel Debug Halt Register" hexmask.long.word 0x00 0.--11. 1. "DBGHALT,DMA Debug Halt" wgroup.long 0x30++0x03 line.long 0x00 "SWREQ,DMA Channel Software Transfer Request Register" hexmask.long.word 0x00 0.--11. 1. "SWREQ,Software Transfer Requests" group.long 0x34++0x03 line.long 0x00 "REQDIS,DMA Channel Request Disable Register" hexmask.long.word 0x00 0.--11. 1. "REQDIS,DMA Request Disables" rgroup.long 0x38++0x03 line.long 0x00 "REQPEND,DMA Channel Requests Pending Register" hexmask.long.word 0x00 0.--11. 1. "REQPEND,DMA Requests Pending" wgroup.long 0x3C++0x03 line.long 0x00 "LINKLOAD,DMA Channel Link Load Register" hexmask.long.word 0x00 0.--11. 1. "LINKLOAD,DMA Link Loads" wgroup.long 0x40++0x03 line.long 0x00 "REQCLEAR,DMA Channel Request Clear Register" hexmask.long.word 0x00 0.--11. 1. "REQCLEAR,DMA Request Clear" rgroup.long 0x60++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 31. "ERROR,Transfer Error Interrupt Flag" "0,1" hexmask.long.word 0x00 0.--11. 1. "DONE,DMA Structure Operation Done Interrupt Flag" wgroup.long 0x64++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 31. "ERROR,Set ERROR Interrupt Flag" "0,1" hexmask.long.word 0x00 0.--11. 1. "DONE,Set DONE Interrupt Flag" wgroup.long 0x68++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 31. "ERROR,Clear ERROR Interrupt Flag" "0,1" hexmask.long.word 0x00 0.--11. 1. "DONE,Clear DONE Interrupt Flag" group.long 0x6C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 31. "ERROR,ERROR Interrupt Enable" "0,1" hexmask.long.word 0x00 0.--11. 1. "DONE,DONE Interrupt Enable" group.long 0x80++0x03 line.long 0x00 "CH0_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x84++0x03 line.long 0x00 "CH0_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x88++0x03 line.long 0x00 "CH0_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x8C++0x03 line.long 0x00 "CH0_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x90++0x03 line.long 0x00 "CH0_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x94++0x03 line.long 0x00 "CH0_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x98++0x03 line.long 0x00 "CH0_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0xB0++0x03 line.long 0x00 "CH1_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB4++0x03 line.long 0x00 "CH1_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0xB8++0x03 line.long 0x00 "CH1_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0xBC++0x03 line.long 0x00 "CH1_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0xC0++0x03 line.long 0x00 "CH1_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0xC4++0x03 line.long 0x00 "CH1_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0xC8++0x03 line.long 0x00 "CH1_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0xE0++0x03 line.long 0x00 "CH2_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xE4++0x03 line.long 0x00 "CH2_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0xE8++0x03 line.long 0x00 "CH2_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0xEC++0x03 line.long 0x00 "CH2_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0xF0++0x03 line.long 0x00 "CH2_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0xF4++0x03 line.long 0x00 "CH2_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0xF8++0x03 line.long 0x00 "CH2_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x110++0x03 line.long 0x00 "CH3_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x114++0x03 line.long 0x00 "CH3_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x118++0x03 line.long 0x00 "CH3_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x11C++0x03 line.long 0x00 "CH3_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x120++0x03 line.long 0x00 "CH3_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x124++0x03 line.long 0x00 "CH3_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x128++0x03 line.long 0x00 "CH3_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x140++0x03 line.long 0x00 "CH4_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x144++0x03 line.long 0x00 "CH4_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x148++0x03 line.long 0x00 "CH4_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x14C++0x03 line.long 0x00 "CH4_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x150++0x03 line.long 0x00 "CH4_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x154++0x03 line.long 0x00 "CH4_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x158++0x03 line.long 0x00 "CH4_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x170++0x03 line.long 0x00 "CH5_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x174++0x03 line.long 0x00 "CH5_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x178++0x03 line.long 0x00 "CH5_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x17C++0x03 line.long 0x00 "CH5_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x180++0x03 line.long 0x00 "CH5_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x184++0x03 line.long 0x00 "CH5_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x188++0x03 line.long 0x00 "CH5_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x1A0++0x03 line.long 0x00 "CH6_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1A4++0x03 line.long 0x00 "CH6_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x1A8++0x03 line.long 0x00 "CH6_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x1AC++0x03 line.long 0x00 "CH6_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x1B0++0x03 line.long 0x00 "CH6_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x1B4++0x03 line.long 0x00 "CH6_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x1B8++0x03 line.long 0x00 "CH6_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x1D0++0x03 line.long 0x00 "CH7_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1D4++0x03 line.long 0x00 "CH7_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x1D8++0x03 line.long 0x00 "CH7_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x1DC++0x03 line.long 0x00 "CH7_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x1E0++0x03 line.long 0x00 "CH7_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x1E4++0x03 line.long 0x00 "CH7_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x1E8++0x03 line.long 0x00 "CH7_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x200++0x03 line.long 0x00 "CH8_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x204++0x03 line.long 0x00 "CH8_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x208++0x03 line.long 0x00 "CH8_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x20C++0x03 line.long 0x00 "CH8_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x210++0x03 line.long 0x00 "CH8_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x214++0x03 line.long 0x00 "CH8_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x218++0x03 line.long 0x00 "CH8_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x230++0x03 line.long 0x00 "CH9_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x234++0x03 line.long 0x00 "CH9_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x238++0x03 line.long 0x00 "CH9_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x23C++0x03 line.long 0x00 "CH9_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x240++0x03 line.long 0x00 "CH9_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x244++0x03 line.long 0x00 "CH9_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x248++0x03 line.long 0x00 "CH9_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x260++0x03 line.long 0x00 "CH10_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x264++0x03 line.long 0x00 "CH10_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x268++0x03 line.long 0x00 "CH10_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x26C++0x03 line.long 0x00 "CH10_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x270++0x03 line.long 0x00 "CH10_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x274++0x03 line.long 0x00 "CH10_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x278++0x03 line.long 0x00 "CH10_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" group.long 0x290++0x03 line.long 0x00 "CH11_REQSEL,Channel Peripheral Request Select Register" bitfld.long 0x00 16.--21. "SOURCESEL,Source Select" "0: No source selected,1: Peripheral Reflex System,?,?,?,?,?,?,8: Analog to Digital Converter 0,9: Analog to Digital Converter 0,10: Digital to Analog Converter 0,?,12: Universal Synchronous/Asynchronous..,13: Universal Synchronous/Asynchronous..,14: Universal Synchronous/Asynchronous..,15: Universal Synchronous/Asynchronous..,16: Universal Synchronous/Asynchronous..,?,18: Universal Asynchronous Receiver/Transmitter 0,19: Universal Asynchronous Receiver/Transmitter 1,20: Low Energy UART 0,21: Low Energy UART 1,22: I2C 0,23: I2C 1,?,25: Timer 0,26: Timer 1,27: Timer 2,28: Timer 3,?,?,?,32: Wide Timer 0,33: Wide Timer 0,?,?,?,?,?,?,?,?,?,?,?,?,?,?,48: Memory System Controller,49: Advanced Encryption Standard Accelerator,50: External Bus Interface,51: PDM Interface,?,?,?,?,?,?,?,?,?,61: Capacitive touch sense module,62: Low Energy Sensor Interface,?..." bitfld.long 0x00 0.--3. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x294++0x03 line.long 0x00 "CH11_CFG,Channel Configuration Register" bitfld.long 0x00 21. "DSTINCSIGN,Destination Address Increment Sign" "0,1" bitfld.long 0x00 20. "SRCINCSIGN,Source Address Increment Sign" "0,1" newline bitfld.long 0x00 16.--17. "ARBSLOTS,Arbitration Slot Number Select" "0: One arbitration slot selected,1: Two arbitration slots selected,2: Four arbitration slots selected,3: Eight arbitration slots selected" group.long 0x298++0x03 line.long 0x00 "CH11_LOOP,Channel Loop Counter Register" hexmask.long.byte 0x00 0.--7. 1. "LOOPCNT,Linked Structure Sequence Loop Counter" group.long 0x29C++0x03 line.long 0x00 "CH11_CTRL,Channel Descriptor Control Word Register" rbitfld.long 0x00 31. "DSTMODE,Destination Addressing Mode" "0,1" rbitfld.long 0x00 30. "SRCMODE,Source Addressing Mode" "0,1" newline bitfld.long 0x00 28.--29. "DSTINC,Destination Address Increment Size" "0: Increment destination address by one unit..,1: Increment destination address by two unit..,2: Increment destination address by four unit..,3: Do not increment the destination address" bitfld.long 0x00 26.--27. "SIZE,Unit Data Transfer Size" "0: Each unit transfer is a byte,1: Each unit transfer is a half-word,2: Each unit transfer is a word,?..." newline bitfld.long 0x00 24.--25. "SRCINC,Source Address Increment Size" "0: Increment source address by one unit data..,1: Increment source address by two unit data..,2: Increment source address by four unit data..,3: Do not increment the source address" bitfld.long 0x00 23. "IGNORESREQ,Ignore Sreq" "0,1" newline bitfld.long 0x00 22. "DECLOOPCNT,Decrement Loop Count" "0,1" bitfld.long 0x00 21. "REQMODE,DMA Request Transfer Mode Select" "0,1" newline bitfld.long 0x00 20. "DONEIFSEN,DMA Operation Done Interrupt Flag Set Enable" "0,1" bitfld.long 0x00 16.--19. "BLOCKSIZE,Block Transfer Size" "0: One unit transfer per arbitration,1: Two unit transfers per arbitration,2: Three unit transfers per arbitration,3: Four unit transfers per arbitration,4: Six unit transfers per arbitration,5: Eight unit transfers per arbitration,?,7: Sixteen unit transfers per arbitration,?,9: 32 unit transfers per arbitration,10: 64 unit transfers per arbitration,11: 128 unit transfers per arbitration,12: 256 unit transfers per arbitration,13: 512 unit transfers per arbitration,14: 1024 unit transfers per arbitration,15: Transfer all units as specified by the.." newline bitfld.long 0x00 15. "BYTESWAP,Endian Byte Swap" "0,1" hexmask.long.word 0x00 4.--14. 1. "XFERCNT,DMA Unit Data Transfer Count" newline bitfld.long 0x00 3. "STRUCTREQ,Structure DMA Transfer Request" "0,1" rbitfld.long 0x00 0.--1. "STRUCTTYPE,DMA Structure Type" "0: DMA transfer structure type selected,1: Synchronization structure type selected,2: Write immediate value structure type selected,?..." group.long 0x2A0++0x03 line.long 0x00 "CH11_SRC,Channel Descriptor Source Data Address Register" hexmask.long 0x00 0.--31. 1. "SRCADDR,Source Data Address" group.long 0x2A4++0x03 line.long 0x00 "CH11_DST,Channel Descriptor Destination Data Address Register" hexmask.long 0x00 0.--31. 1. "DSTADDR,Destination Data Address" group.long 0x2A8++0x03 line.long 0x00 "CH11_LINK,Channel Descriptor Link Structure Address Register" hexmask.long 0x00 2.--31. 1. "LINKADDR,Link Structure Address" bitfld.long 0x00 1. "LINK,Link Next Structure" "0,1" newline rbitfld.long 0x00 0. "LINKMODE,Link Structure Addressing Mode" "0,1" tree.end tree "LESENSE" base ad:0x40055000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 22. "DEBUGRUN,Debug Mode Run Enable" "0,1" bitfld.long 0x00 20.--21. "DMAWU,DMA Wake-up From EM2" "0: No DMA wake-up from EM2,1: DMA wake-up from EM2 when data is valid in..,2: DMA wake-up from EM2 when the result buffer..,?..." newline bitfld.long 0x00 19. "BUFIDL,Result Buffer Interrupt and DMA Trigger Level" "0,1" bitfld.long 0x00 17. "STRSCANRES,Enable Storing of SCANRES" "0,1" newline bitfld.long 0x00 16. "BUFOW,Result Buffer Over" "0,1" bitfld.long 0x00 13. "DUALSAMPLE,Enable Dual Sample Mode" "0,1" newline bitfld.long 0x00 11. "ALTEXMAP,Alternative Excitation Map" "0,1" bitfld.long 0x00 7.--8. "SCANCONF,Select Scan Configuration" "0: The channel configuration register registers..,1: The channel configuration register registers..,2: The channel configuration register registers..,3: The decoder state defines the CONF registers.." newline bitfld.long 0x00 2.--5. "PRSSEL,Scan Start PRS Select" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" bitfld.long 0x00 0.--1. "SCANMODE,Configure Scan Mode" "0: A new scan is started each time the period..,1: A single scan is performed when START in CMD..,2: Pulse on PRS channel,?..." group.long 0x04++0x03 line.long 0x00 "TIMCTRL,Timing Control Register" bitfld.long 0x00 28. "AUXSTARTUP,AUXHFRCO Startup Configuration" "0,1" bitfld.long 0x00 22.--23. "STARTDLY,Start Delay Configuration" "0,1,2,3" newline hexmask.long.byte 0x00 12.--19. 1. "PCTOP,Period Counter Top Value" bitfld.long 0x00 8.--10. "PCPRESC,Period Counter Prescaling" "0: The period counter clock frequency is..,1: The period counter clock frequency is..,2: The period counter clock frequency is..,3: The period counter clock frequency is..,4: The period counter clock frequency is..,5: The period counter clock frequency is..,6: The period counter clock frequency is..,7: The period counter clock frequency is.." newline bitfld.long 0x00 4.--6. "LFPRESC,Prescaling Factor for Low Frequency Timer" "0: Low frequency timer is clocked with..,1: Low frequency timer is clocked with..,2: Low frequency timer is clocked with..,3: Low frequency timer is clocked with..,4: Low frequency timer is clocked with..,5: Low frequency timer is clocked with..,6: Low frequency timer is clocked with..,7: Low frequency timer is clocked with.." bitfld.long 0x00 0.--1. "AUXPRESC,Prescaling Factor for High Frequency Timer" "0: High frequency timer is clocked with AUXHFRCO/1,1: High frequency timer is clocked with AUXHFRCO/2,2: High frequency timer is clocked with AUXHFRCO/4,3: High frequency timer is clocked with AUXHFRCO/8" group.long 0x08++0x03 line.long 0x00 "PERCTRL,Peripheral Control Register" bitfld.long 0x00 28.--29. "WARMUPMODE,ACMP and VDAC Duty Cycle Mode" "0: The analog comparators and VDAC are shut down..,1: The analog comparators are kept powered up..,2: The VDAC is kept powered up when LESENSE is..,3: The analog comparators and VDAC are kept.." bitfld.long 0x00 27. "ACMP1HYSTEN,ACMP1 Hysteresis Enable" "0,1" newline bitfld.long 0x00 26. "ACMP0HYSTEN,ACMP0 Hysteresis Enable" "0,1" bitfld.long 0x00 25. "ACMP1INV,Invert Analog Comparator 1 Output" "0,1" newline bitfld.long 0x00 24. "ACMP0INV,Invert Analog Comparator 0 Output" "0,1" bitfld.long 0x00 22.--23. "ACMP1MODE,ACMP1 Mode" "0: LESENSE does not control ACMP1,1: LESENSE controls the input mux (POSSEL) of..,2: LESENSE controls the input mux and the..,?..." newline bitfld.long 0x00 20.--21. "ACMP0MODE,ACMP0 Mode" "0: LESENSE does not control ACMP0,1: LESENSE controls the input mux (POSSEL) of..,2: LESENSE controls the input mux (POSSEL) and..,?..." bitfld.long 0x00 8. "DACCONVTRIG,VDAC Conversion Trigger Configuration" "0,1" newline bitfld.long 0x00 6. "DACSTARTUP,VDAC Startup Configuration" "0,1" bitfld.long 0x00 3. "DACCH1DATA,VDAC CH1 Data Selection" "0,1" newline bitfld.long 0x00 2. "DACCH0DATA,VDAC CH0 Data Selection" "0,1" bitfld.long 0x00 1. "DACCH1EN,VDAC CH1 Enable" "0,1" newline bitfld.long 0x00 0. "DACCH0EN,VDAC CH0 Enable" "0,1" group.long 0x0C++0x03 line.long 0x00 "DECCTRL,Decoder Control Register" bitfld.long 0x00 25.--28. "PRSSEL3,LESENSE Decoder PRS Input 3 Configuration" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" bitfld.long 0x00 20.--23. "PRSSEL2,LESENSE Decoder PRS Input 2 Configuration" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 15.--18. "PRSSEL1,LESENSE Decoder PRS Input 1 Configuration" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" bitfld.long 0x00 10.--13. "PRSSEL0,LESENSE Decoder PRS Input 0 Configuration" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 8. "INPUT,LESENSE Decoder Input Configuration" "0,1" bitfld.long 0x00 7. "PRSCNT,Enable Count Mode on Decoder PRS Channels 0 and 1" "0,1" newline bitfld.long 0x00 6. "HYSTIRQ,Enable Decoder Hysteresis on Interrupt Requests" "0,1" bitfld.long 0x00 5. "HYSTPRS2,Enable Decoder Hysteresis on PRS2 Output" "0,1" newline bitfld.long 0x00 4. "HYSTPRS1,Enable Decoder Hysteresis on PRS1 Output" "0,1" bitfld.long 0x00 3. "HYSTPRS0,Enable Decoder Hysteresis on PRS0 Output" "0,1" newline bitfld.long 0x00 2. "INTMAP,Enable Decoder to Channel Interrupt Mapping" "0,1" bitfld.long 0x00 1. "ERRCHK,Enable Check of Current State" "0,1" newline bitfld.long 0x00 0. "DISABLE,Disable the Decoder" "0,1" group.long 0x10++0x03 line.long 0x00 "BIASCTRL,Bias Control Register" bitfld.long 0x00 0.--1. "BIASMODE,Select Bias Mode" "0: Bias module is controlled by the EMU and is..,1: Bias module duty cycled between low power and..,2: Bias module always in high accuracy mode,?..." group.long 0x14++0x03 line.long 0x00 "EVALCTRL,LESENSE Evaluation Control" hexmask.long.word 0x00 0.--15. 1. "WINSIZE,Sliding Window and Step Detection Size" group.long 0x18++0x03 line.long 0x00 "PRSCTRL,PRS Control Register" bitfld.long 0x00 16. "DECCMPEN,Enable PRS Output DECCMP" "0,1" bitfld.long 0x00 8.--12. "DECCMPMASK,Decoder State Compare Value Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. "DECCMPVAL,Decoder State Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" wgroup.long 0x1C++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 3. "CLEARBUF,Clear Result Buffer" "0,1" bitfld.long 0x00 2. "DECODE,Start Decoder" "0,1" newline bitfld.long 0x00 1. "STOP,Stop Scanning of Sensors" "0,1" bitfld.long 0x00 0. "START,Start Scanning of Sensors" "0,1" group.long 0x20++0x03 line.long 0x00 "CHEN,Channel Enable Register" hexmask.long.word 0x00 0.--15. 1. "CHEN,Enable Scan Channel" group.long 0x24++0x03 line.long 0x00 "SCANRES,Scan Result Register" hexmask.long.word 0x00 16.--31. 1. "STEPDIR,Direction of Previous Step Detection" hexmask.long.word 0x00 0.--15. 1. "SCANRES,Scan Results" rgroup.long 0x28++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 5. "DACACTIVE,LESENSE VDAC Interface is Active" "0,1" bitfld.long 0x00 4. "SCANACTIVE,LESENSE Scan Active" "0,1" newline bitfld.long 0x00 3. "RUNNING,LESENSE Periodic Counter Running" "0,1" bitfld.long 0x00 2. "BUFFULL,Result Buffer Full" "0,1" newline bitfld.long 0x00 1. "BUFHALFFULL,Result Buffer Half Full" "0,1" bitfld.long 0x00 0. "BUFDATAV,Result Data Valid" "0,1" rgroup.long 0x2C++0x03 line.long 0x00 "PTR,Result Buffer Pointers" bitfld.long 0x00 4.--7. "WR,Result Buffer Write Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "RD,Result Buffer Read Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x30++0x03 line.long 0x00 "BUFDATA,Result Buffer Data Register" bitfld.long 0x00 16.--19. "BUFDATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "BUFDATA,Result Data" rgroup.long 0x34++0x03 line.long 0x00 "CURCH,Current Channel Index" bitfld.long 0x00 0.--3. "CURCH,Current Channel Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x38++0x03 line.long 0x00 "DECSTATE,Current Decoder State" bitfld.long 0x00 0.--4. "DECSTATE,Current Decoder State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x3C++0x03 line.long 0x00 "SENSORSTATE,Decoder Input Register" bitfld.long 0x00 0.--3. "SENSORSTATE,Decoder Input Register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40++0x03 line.long 0x00 "IDLECONF,GPIO Idle Phase Configuration" bitfld.long 0x00 30.--31. "CH15,Channel 15 Idle Phase Configuration" "0: CH15 output is disabled in idle phase,1: CH15 output is high in idle phase,2: CH15 output is low in idle phase,3: CH15 output is connected to VDAC output in.." bitfld.long 0x00 28.--29. "CH14,Channel 14 Idle Phase Configuration" "0: CH14 output is disabled in idle phase,1: CH14 output is high in idle phase,2: CH14 output is low in idle phase,3: CH14 output is connected to VDAC output in.." newline bitfld.long 0x00 26.--27. "CH13,Channel 13 Idle Phase Configuration" "0: CH13 output is disabled in idle phase,1: CH13 output is high in idle phase,2: CH13 output is low in idle phase,3: CH13 output is connected to VDAC output in.." bitfld.long 0x00 24.--25. "CH12,Channel 12 Idle Phase Configuration" "0: CH12 output is disabled in idle phase,1: CH12 output is high in idle phase,2: CH12 output is low in idle phase,3: CH12 output is connected to VDAC output in.." newline bitfld.long 0x00 22.--23. "CH11,Channel 11 Idle Phase Configuration" "0: CH11 output is disabled in idle phase,1: CH11 output is high in idle phase,2: CH11 output is low in idle phase,3: CH11 output is connected to VDAC output in.." bitfld.long 0x00 20.--21. "CH10,Channel 10 Idle Phase Configuration" "0: CH10 output is disabled in idle phase,1: CH10 output is high in idle phase,2: CH10 output is low in idle phase,3: CH10 output is connected to VDAC output in.." newline bitfld.long 0x00 18.--19. "CH9,Channel 9 Idle Phase Configuration" "0: CH9 output is disabled in idle phase,1: CH9 output is high in idle phase,2: CH9 output is low in idle phase,3: CH9 output is connected to VDAC output in.." bitfld.long 0x00 16.--17. "CH8,Channel 8 Idle Phase Configuration" "0: CH8 output is disabled in idle phase,1: CH8 output is high in idle phase,2: CH8 output is low in idle phase,3: CH8 output is connected to VDAC output in.." newline bitfld.long 0x00 14.--15. "CH7,Channel 7 Idle Phase Configuration" "0: CH7 output is disabled in idle phase,1: CH7 output is high in idle phase,2: CH7 output is low in idle phase,3: CH7 output is connected to VDAC output in.." bitfld.long 0x00 12.--13. "CH6,Channel 6 Idle Phase Configuration" "0: CH6 output is disabled in idle phase,1: CH6 output is high in idle phase,2: CH6 output is low in idle phase,3: CH6 output is connected to VDAC output in.." newline bitfld.long 0x00 10.--11. "CH5,Channel 5 Idle Phase Configuration" "0: CH5 output is disabled in idle phase,1: CH5 output is high in idle phase,2: CH5 output is low in idle phase,3: CH5 output is connected to VDAC output in.." bitfld.long 0x00 8.--9. "CH4,Channel 4 Idle Phase Configuration" "0: CH4 output is disabled in idle phase,1: CH4 output is high in idle phase,2: CH4 output is low in idle phase,3: CH4 output is connected to VDAC output in.." newline bitfld.long 0x00 6.--7. "CH3,Channel 3 Idle Phase Configuration" "0: CH3 output is disabled in idle phase,1: CH3 output is high in idle phase,2: CH3 output is low in idle phase,3: CH3 output is connected to VDAC output in.." bitfld.long 0x00 4.--5. "CH2,Channel 2 Idle Phase Configuration" "0: CH2 output is disabled in idle phase,1: CH2 output is high in idle phase,2: CH2 output is low in idle phase,3: CH2 output is connected to VDAC output in.." newline bitfld.long 0x00 2.--3. "CH1,Channel 1 Idle Phase Configuration" "0: CH1 output is disabled in idle phase,1: CH1 output is high in idle phase,2: CH1 output is low in idle phase,3: CH1 output is connected to VDAC output in.." bitfld.long 0x00 0.--1. "CH0,Channel 0 Idle Phase Configuration" "0: CH0 output is disabled in idle phase,1: CH0 output is high in idle phase,2: CH0 output is low in idle phase,3: CH0 output is connected to VDAC output in.." group.long 0x44++0x03 line.long 0x00 "ALTEXCONF,Alternative Excite Pin Configuration" bitfld.long 0x00 23. "AEX7,ALTEX7 Always Excite Enable" "0,1" bitfld.long 0x00 22. "AEX6,ALTEX6 Always Excite Enable" "0,1" newline bitfld.long 0x00 21. "AEX5,ALTEX5 Always Excite Enable" "0,1" bitfld.long 0x00 20. "AEX4,ALTEX4 Always Excite Enable" "0,1" newline bitfld.long 0x00 19. "AEX3,ALTEX3 Always Excite Enable" "0,1" bitfld.long 0x00 18. "AEX2,ALTEX2 Always Excite Enable" "0,1" newline bitfld.long 0x00 17. "AEX1,ALTEX1 Always Excite Enable" "0,1" bitfld.long 0x00 16. "AEX0,ALTEX0 Always Excite Enable" "0,1" newline bitfld.long 0x00 14.--15. "IDLECONF7,ALTEX7 Idle Phase Configuration" "0: ALTEX7 output is disabled in idle phase,1: ALTEX7 output is high in idle phase,2: ALTEX7 output is low in idle phase,?..." bitfld.long 0x00 12.--13. "IDLECONF6,ALTEX6 Idle Phase Configuration" "0: ALTEX6 output is disabled in idle phase,1: ALTEX6 output is high in idle phase,2: ALTEX6 output is low in idle phase,?..." newline bitfld.long 0x00 10.--11. "IDLECONF5,ALTEX5 Idle Phase Configuration" "0: ALTEX5 output is disabled in idle phase,1: ALTEX5 output is high in idle phase,2: ALTEX5 output is low in idle phase,?..." bitfld.long 0x00 8.--9. "IDLECONF4,ALTEX4 Idle Phase Configuration" "0: ALTEX4 output is disabled in idle phase,1: ALTEX4 output is high in idle phase,2: ALTEX4 output is low in idle phase,?..." newline bitfld.long 0x00 6.--7. "IDLECONF3,ALTEX3 Idle Phase Configuration" "0: ALTEX3 output is disabled in idle phase,1: ALTEX3 output is high in idle phase,2: ALTEX3 output is low in idle phase,?..." bitfld.long 0x00 4.--5. "IDLECONF2,ALTEX2 Idle Phase Configuration" "0: ALTEX2 output is disabled in idle phase,1: ALTEX2 output is high in idle phase,2: ALTEX2 output is low in idle phase,?..." newline bitfld.long 0x00 2.--3. "IDLECONF1,ALTEX1 Idle Phase Configuration" "0: ALTEX1 output is disabled in idle phase,1: ALTEX1 output is high in idle phase,2: ALTEX1 output is low in idle phase,?..." bitfld.long 0x00 0.--1. "IDLECONF0,ALTEX0 Idle Phase Configuration" "0: ALTEX0 output is disabled in idle phase,1: ALTEX0 output is high in idle phase,2: ALTEX0 output is low in idle phase,?..." rgroup.long 0x50++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 22. "CNTOF,CNTOF Interrupt Flag" "0,1" bitfld.long 0x00 21. "BUFOF,BUFOF Interrupt Flag" "0,1" newline bitfld.long 0x00 20. "BUFLEVEL,BUFLEVEL Interrupt Flag" "0,1" bitfld.long 0x00 19. "BUFDATAV,BUFDATAV Interrupt Flag" "0,1" newline bitfld.long 0x00 18. "DECERR,DECERR Interrupt Flag" "0,1" bitfld.long 0x00 17. "DEC,DEC Interrupt Flag" "0,1" newline bitfld.long 0x00 16. "SCANCOMPLETE,SCANCOMPLETE Interrupt Flag" "0,1" bitfld.long 0x00 15. "CH15,CH15 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "CH14,CH14 Interrupt Flag" "0,1" bitfld.long 0x00 13. "CH13,CH13 Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CH12,CH12 Interrupt Flag" "0,1" bitfld.long 0x00 11. "CH11,CH11 Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "CH10,CH10 Interrupt Flag" "0,1" bitfld.long 0x00 9. "CH9,CH9 Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "CH8,CH8 Interrupt Flag" "0,1" bitfld.long 0x00 7. "CH7,CH7 Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "CH6,CH6 Interrupt Flag" "0,1" bitfld.long 0x00 5. "CH5,CH5 Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "CH4,CH4 Interrupt Flag" "0,1" bitfld.long 0x00 3. "CH3,CH3 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CH2,CH2 Interrupt Flag" "0,1" bitfld.long 0x00 1. "CH1,CH1 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CH0,CH0 Interrupt Flag" "0,1" wgroup.long 0x54++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 22. "CNTOF,Set CNTOF Interrupt Flag" "0,1" bitfld.long 0x00 21. "BUFOF,Set BUFOF Interrupt Flag" "0,1" newline bitfld.long 0x00 20. "BUFLEVEL,Set BUFLEVEL Interrupt Flag" "0,1" bitfld.long 0x00 19. "BUFDATAV,Set BUFDATAV Interrupt Flag" "0,1" newline bitfld.long 0x00 18. "DECERR,Set DECERR Interrupt Flag" "0,1" bitfld.long 0x00 17. "DEC,Set DEC Interrupt Flag" "0,1" newline bitfld.long 0x00 16. "SCANCOMPLETE,Set SCANCOMPLETE Interrupt Flag" "0,1" bitfld.long 0x00 15. "CH15,Set CH15 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "CH14,Set CH14 Interrupt Flag" "0,1" bitfld.long 0x00 13. "CH13,Set CH13 Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CH12,Set CH12 Interrupt Flag" "0,1" bitfld.long 0x00 11. "CH11,Set CH11 Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "CH10,Set CH10 Interrupt Flag" "0,1" bitfld.long 0x00 9. "CH9,Set CH9 Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "CH8,Set CH8 Interrupt Flag" "0,1" bitfld.long 0x00 7. "CH7,Set CH7 Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "CH6,Set CH6 Interrupt Flag" "0,1" bitfld.long 0x00 5. "CH5,Set CH5 Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "CH4,Set CH4 Interrupt Flag" "0,1" bitfld.long 0x00 3. "CH3,Set CH3 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CH2,Set CH2 Interrupt Flag" "0,1" bitfld.long 0x00 1. "CH1,Set CH1 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CH0,Set CH0 Interrupt Flag" "0,1" wgroup.long 0x58++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 22. "CNTOF,Clear CNTOF Interrupt Flag" "0,1" bitfld.long 0x00 21. "BUFOF,Clear BUFOF Interrupt Flag" "0,1" newline bitfld.long 0x00 20. "BUFLEVEL,Clear BUFLEVEL Interrupt Flag" "0,1" bitfld.long 0x00 19. "BUFDATAV,Clear BUFDATAV Interrupt Flag" "0,1" newline bitfld.long 0x00 18. "DECERR,Clear DECERR Interrupt Flag" "0,1" bitfld.long 0x00 17. "DEC,Clear DEC Interrupt Flag" "0,1" newline bitfld.long 0x00 16. "SCANCOMPLETE,Clear SCANCOMPLETE Interrupt Flag" "0,1" bitfld.long 0x00 15. "CH15,Clear CH15 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "CH14,Clear CH14 Interrupt Flag" "0,1" bitfld.long 0x00 13. "CH13,Clear CH13 Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CH12,Clear CH12 Interrupt Flag" "0,1" bitfld.long 0x00 11. "CH11,Clear CH11 Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "CH10,Clear CH10 Interrupt Flag" "0,1" bitfld.long 0x00 9. "CH9,Clear CH9 Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "CH8,Clear CH8 Interrupt Flag" "0,1" bitfld.long 0x00 7. "CH7,Clear CH7 Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "CH6,Clear CH6 Interrupt Flag" "0,1" bitfld.long 0x00 5. "CH5,Clear CH5 Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "CH4,Clear CH4 Interrupt Flag" "0,1" bitfld.long 0x00 3. "CH3,Clear CH3 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CH2,Clear CH2 Interrupt Flag" "0,1" bitfld.long 0x00 1. "CH1,Clear CH1 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CH0,Clear CH0 Interrupt Flag" "0,1" group.long 0x5C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 22. "CNTOF,CNTOF Interrupt Enable" "0,1" bitfld.long 0x00 21. "BUFOF,BUFOF Interrupt Enable" "0,1" newline bitfld.long 0x00 20. "BUFLEVEL,BUFLEVEL Interrupt Enable" "0,1" bitfld.long 0x00 19. "BUFDATAV,BUFDATAV Interrupt Enable" "0,1" newline bitfld.long 0x00 18. "DECERR,DECERR Interrupt Enable" "0,1" bitfld.long 0x00 17. "DEC,DEC Interrupt Enable" "0,1" newline bitfld.long 0x00 16. "SCANCOMPLETE,SCANCOMPLETE Interrupt Enable" "0,1" bitfld.long 0x00 15. "CH15,CH15 Interrupt Enable" "0,1" newline bitfld.long 0x00 14. "CH14,CH14 Interrupt Enable" "0,1" bitfld.long 0x00 13. "CH13,CH13 Interrupt Enable" "0,1" newline bitfld.long 0x00 12. "CH12,CH12 Interrupt Enable" "0,1" bitfld.long 0x00 11. "CH11,CH11 Interrupt Enable" "0,1" newline bitfld.long 0x00 10. "CH10,CH10 Interrupt Enable" "0,1" bitfld.long 0x00 9. "CH9,CH9 Interrupt Enable" "0,1" newline bitfld.long 0x00 8. "CH8,CH8 Interrupt Enable" "0,1" bitfld.long 0x00 7. "CH7,CH7 Interrupt Enable" "0,1" newline bitfld.long 0x00 6. "CH6,CH6 Interrupt Enable" "0,1" bitfld.long 0x00 5. "CH5,CH5 Interrupt Enable" "0,1" newline bitfld.long 0x00 4. "CH4,CH4 Interrupt Enable" "0,1" bitfld.long 0x00 3. "CH3,CH3 Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "CH2,CH2 Interrupt Enable" "0,1" bitfld.long 0x00 1. "CH1,CH1 Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "CH0,CH0 Interrupt Enable" "0,1" rgroup.long 0x60++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 7. "CMD,CMD Register Busy" "0,1" group.long 0x64++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Register" bitfld.long 0x00 23. "ALTEX7PEN,ALTEX7 Pin Enable" "0,1" bitfld.long 0x00 22. "ALTEX6PEN,ALTEX6 Pin Enable" "0,1" newline bitfld.long 0x00 21. "ALTEX5PEN,ALTEX5 Pin Enable" "0,1" bitfld.long 0x00 20. "ALTEX4PEN,ALTEX4 Pin Enable" "0,1" newline bitfld.long 0x00 19. "ALTEX3PEN,ALTEX3 Pin Enable" "0,1" bitfld.long 0x00 18. "ALTEX2PEN,ALTEX2 Pin Enable" "0,1" newline bitfld.long 0x00 17. "ALTEX1PEN,ALTEX1 Pin Enable" "0,1" bitfld.long 0x00 16. "ALTEX0PEN,ALTEX0 Pin Enable" "0,1" newline bitfld.long 0x00 15. "CH15PEN,CH15 Pin Enable" "0,1" bitfld.long 0x00 14. "CH14PEN,CH14 Pin Enable" "0,1" newline bitfld.long 0x00 13. "CH13PEN,CH13 Pin Enable" "0,1" bitfld.long 0x00 12. "CH12PEN,CH12 Pin Enable" "0,1" newline bitfld.long 0x00 11. "CH11PEN,CH11 Pin Enable" "0,1" bitfld.long 0x00 10. "CH10PEN,CH10 Pin Enable" "0,1" newline bitfld.long 0x00 9. "CH9PEN,CH9 Pin Enable" "0,1" bitfld.long 0x00 8. "CH8PEN,CH8 Pin Enable" "0,1" newline bitfld.long 0x00 7. "CH7PEN,CH7 Pin Enable" "0,1" bitfld.long 0x00 6. "CH6PEN,CH6 Pin Enable" "0,1" newline bitfld.long 0x00 5. "CH5PEN,CH5 Pin Enable" "0,1" bitfld.long 0x00 4. "CH4PEN,CH4 Pin Enable" "0,1" newline bitfld.long 0x00 3. "CH3PEN,CH3 Pin Enable" "0,1" bitfld.long 0x00 2. "CH2PEN,CH2 Pin Enable" "0,1" newline bitfld.long 0x00 1. "CH1PEN,CH1 Pin Enable" "0,1" bitfld.long 0x00 0. "CH0PEN,CH0 Pin Enable" "0,1" group.long 0x100++0x03 line.long 0x00 "ST0_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x104++0x03 line.long 0x00 "ST0_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x108++0x03 line.long 0x00 "ST1_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x10C++0x03 line.long 0x00 "ST1_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x110++0x03 line.long 0x00 "ST2_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x114++0x03 line.long 0x00 "ST2_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x118++0x03 line.long 0x00 "ST3_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x11C++0x03 line.long 0x00 "ST3_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x120++0x03 line.long 0x00 "ST4_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x124++0x03 line.long 0x00 "ST4_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x128++0x03 line.long 0x00 "ST5_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x12C++0x03 line.long 0x00 "ST5_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x130++0x03 line.long 0x00 "ST6_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x134++0x03 line.long 0x00 "ST6_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x138++0x03 line.long 0x00 "ST7_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13C++0x03 line.long 0x00 "ST7_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x03 line.long 0x00 "ST8_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x144++0x03 line.long 0x00 "ST8_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x148++0x03 line.long 0x00 "ST9_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x14C++0x03 line.long 0x00 "ST9_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x150++0x03 line.long 0x00 "ST10_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x154++0x03 line.long 0x00 "ST10_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x158++0x03 line.long 0x00 "ST11_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x15C++0x03 line.long 0x00 "ST11_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x160++0x03 line.long 0x00 "ST12_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x164++0x03 line.long 0x00 "ST12_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x168++0x03 line.long 0x00 "ST13_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x16C++0x03 line.long 0x00 "ST13_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x170++0x03 line.long 0x00 "ST14_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x174++0x03 line.long 0x00 "ST14_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x178++0x03 line.long 0x00 "ST15_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x17C++0x03 line.long 0x00 "ST15_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x180++0x03 line.long 0x00 "ST16_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x184++0x03 line.long 0x00 "ST16_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x188++0x03 line.long 0x00 "ST17_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18C++0x03 line.long 0x00 "ST17_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x190++0x03 line.long 0x00 "ST18_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x194++0x03 line.long 0x00 "ST18_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x198++0x03 line.long 0x00 "ST19_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x19C++0x03 line.long 0x00 "ST19_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1A0++0x03 line.long 0x00 "ST20_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1A4++0x03 line.long 0x00 "ST20_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1A8++0x03 line.long 0x00 "ST21_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1AC++0x03 line.long 0x00 "ST21_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1B0++0x03 line.long 0x00 "ST22_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1B4++0x03 line.long 0x00 "ST22_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1B8++0x03 line.long 0x00 "ST23_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1BC++0x03 line.long 0x00 "ST23_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C0++0x03 line.long 0x00 "ST24_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C4++0x03 line.long 0x00 "ST24_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C8++0x03 line.long 0x00 "ST25_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1CC++0x03 line.long 0x00 "ST25_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1D0++0x03 line.long 0x00 "ST26_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1D4++0x03 line.long 0x00 "ST26_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1D8++0x03 line.long 0x00 "ST27_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1DC++0x03 line.long 0x00 "ST27_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1E0++0x03 line.long 0x00 "ST28_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1E4++0x03 line.long 0x00 "ST28_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1E8++0x03 line.long 0x00 "ST29_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1EC++0x03 line.long 0x00 "ST29_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1F0++0x03 line.long 0x00 "ST30_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1F4++0x03 line.long 0x00 "ST30_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1F8++0x03 line.long 0x00 "ST31_TCONFA,State Transition Configuration a" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag Enable" "0,1" newline bitfld.long 0x00 14. "CHAIN,Enable State Descriptor Chaining" "0,1" bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1FC++0x03 line.long 0x00 "ST31_TCONFB,State Transition Configuration B" bitfld.long 0x00 16.--18. "PRSACT,Configure Transition Action" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. "SETIF,Set Interrupt Flag" "0,1" newline bitfld.long 0x00 8.--12. "NEXTSTATE,Next State Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4.--7. "MASK,Sensor Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "COMP,Sensor Compare Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x200++0x03 line.long 0x00 "BUF0_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x204++0x03 line.long 0x00 "BUF1_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x208++0x03 line.long 0x00 "BUF2_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x20C++0x03 line.long 0x00 "BUF3_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x210++0x03 line.long 0x00 "BUF4_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x214++0x03 line.long 0x00 "BUF5_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x218++0x03 line.long 0x00 "BUF6_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x21C++0x03 line.long 0x00 "BUF7_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x220++0x03 line.long 0x00 "BUF8_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x224++0x03 line.long 0x00 "BUF9_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x228++0x03 line.long 0x00 "BUF10_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x22C++0x03 line.long 0x00 "BUF11_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x230++0x03 line.long 0x00 "BUF12_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x234++0x03 line.long 0x00 "BUF13_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x238++0x03 line.long 0x00 "BUF14_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x23C++0x03 line.long 0x00 "BUF15_DATA,Scan Results" rbitfld.long 0x00 16.--19. "DATASRC,Result Data Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. "DATA,Scan Result Buffer" group.long 0x240++0x03 line.long 0x00 "CH0_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x244++0x03 line.long 0x00 "CH0_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x248++0x03 line.long 0x00 "CH0_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x250++0x03 line.long 0x00 "CH1_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x254++0x03 line.long 0x00 "CH1_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x258++0x03 line.long 0x00 "CH1_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x260++0x03 line.long 0x00 "CH2_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x264++0x03 line.long 0x00 "CH2_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x268++0x03 line.long 0x00 "CH2_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x270++0x03 line.long 0x00 "CH3_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x274++0x03 line.long 0x00 "CH3_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x278++0x03 line.long 0x00 "CH3_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x280++0x03 line.long 0x00 "CH4_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x284++0x03 line.long 0x00 "CH4_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x288++0x03 line.long 0x00 "CH4_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x290++0x03 line.long 0x00 "CH5_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x294++0x03 line.long 0x00 "CH5_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x298++0x03 line.long 0x00 "CH5_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x2A0++0x03 line.long 0x00 "CH6_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2A4++0x03 line.long 0x00 "CH6_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x2A8++0x03 line.long 0x00 "CH6_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x2B0++0x03 line.long 0x00 "CH7_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2B4++0x03 line.long 0x00 "CH7_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x2B8++0x03 line.long 0x00 "CH7_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x2C0++0x03 line.long 0x00 "CH8_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2C4++0x03 line.long 0x00 "CH8_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x2C8++0x03 line.long 0x00 "CH8_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x2D0++0x03 line.long 0x00 "CH9_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2D4++0x03 line.long 0x00 "CH9_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x2D8++0x03 line.long 0x00 "CH9_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x2E0++0x03 line.long 0x00 "CH10_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2E4++0x03 line.long 0x00 "CH10_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x2E8++0x03 line.long 0x00 "CH10_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x2F0++0x03 line.long 0x00 "CH11_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2F4++0x03 line.long 0x00 "CH11_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x2F8++0x03 line.long 0x00 "CH11_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x300++0x03 line.long 0x00 "CH12_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x304++0x03 line.long 0x00 "CH12_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x308++0x03 line.long 0x00 "CH12_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x310++0x03 line.long 0x00 "CH13_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x314++0x03 line.long 0x00 "CH13_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x318++0x03 line.long 0x00 "CH13_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x320++0x03 line.long 0x00 "CH14_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x324++0x03 line.long 0x00 "CH14_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x328++0x03 line.long 0x00 "CH14_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" group.long 0x330++0x03 line.long 0x00 "CH15_TIMING,Scan Configuration" hexmask.long.word 0x00 14.--23. 1. "MEASUREDLY,Set Measure Delay" hexmask.long.byte 0x00 6.--13. 1. "SAMPLEDLY,Set Sample Delay" newline bitfld.long 0x00 0.--5. "EXTIME,Set Excitation Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x334++0x03 line.long 0x00 "CH15_INTERACT,Scan Configuration" bitfld.long 0x00 21. "ALTEX,Use Alternative Excite Pin" "0,1" bitfld.long 0x00 20. "SAMPLECLK,Select Clock Used for Timing of Sample Delay" "0,1" newline bitfld.long 0x00 19. "EXCLK,Select Clock Used for Excitation Timing" "0,1" bitfld.long 0x00 17.--18. "EXMODE,Set GPIO Mode" "0: Disabled,1: Push Pull GPIO is driven high,2: Push Pull GPIO is driven low,3: VDAC output" newline bitfld.long 0x00 14.--16. "SETIF,Enable Interrupt Generation" "0: No interrupt is generated,1: Set interrupt flag if the sensor triggers,2: Set interrupt flag on positive edge of the..,3: Set interrupt flag on negative edge of the..,4: Set interrupt flag on both edges of the..,?..." bitfld.long 0x00 12.--13. "SAMPLE,Select Sample Mode" "0: Counter output will be used in evaluation,1: ACMP output will be used in evaluation,2: ADC output will be used in evaluation,3: Differential ADC output will be used in.." newline hexmask.long.word 0x00 0.--11. 1. "THRES,ACMP Threshold or VDAC Data" group.long 0x338++0x03 line.long 0x00 "CH15_EVAL,Scan Configuration" bitfld.long 0x00 21.--22. "MODE,Configure Evaluation Mode" "0: Threshold comparison is used to evaluate..,1: Sliding window is used to evaluate sensor..,2: Step detection is used to evaluate sensor..,?..." bitfld.long 0x00 20. "SCANRESINV,Enable Inversion of Result" "0,1" newline bitfld.long 0x00 18.--19. "STRSAMPLE,Enable Storing of Sensor Sample in Result Buffer" "0: Nothing will be stored in the result buffer,1: The sensor sample data will be stored in the..,2: The data source (i.e. the channel) will be..,?..." bitfld.long 0x00 17. "DECODE,Send Result to Decoder" "0,1" newline bitfld.long 0x00 16. "COMP,Select Mode for Threshold Comparison" "0,1" hexmask.long.word 0x00 0.--15. 1. "COMPTHRES,Decision Threshold for Sensor Data" tree.end tree "LETIMER (LETIMER0)" repeat 2. (list 0. 1.) (list ad:0x40066000 ad:0x40066400) tree "LETIMER$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 12. "DEBUGRUN,Debug Mode Run Enable" "0,1" bitfld.long 0x00 9. "COMP0TOP,Compare Value 0 is Top Value" "0,1" newline bitfld.long 0x00 8. "BUFTOP,Buffered Top" "0,1" bitfld.long 0x00 7. "OPOL1,Output 1 Polarity" "0,1" newline bitfld.long 0x00 6. "OPOL0,Output 0 Polarity" "0,1" bitfld.long 0x00 4.--5. "UFOA1,Underflow Output Action 1" "0: LETn_O1 is held at its idle value as defined..,1: LETn_O1 is toggled on CNT underflow,2: LETn_O1 is held active for one LFACLKLETIMER0..,3: LETn_O1 is set idle on CNT underflow and.." newline bitfld.long 0x00 2.--3. "UFOA0,Underflow Output Action 0" "0: LETn_O0 is held at its idle value as defined..,1: LETn_O0 is toggled on CNT underflow,2: LETn_O0 is held active for one LFACLKLETIMER0..,3: LETn_O0 is set idle on CNT underflow and.." bitfld.long 0x00 0.--1. "REPMODE,Repeat Mode" "0: When started the LETIMER counts down until it..,1: The counter counts REP0 times,2: The counter counts REP0 times,3: Both REP0 and REP1 are decremented when the.." wgroup.long 0x04++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 4. "CTO1,Clear Toggle Output 1" "0,1" bitfld.long 0x00 3. "CTO0,Clear Toggle Output 0" "0,1" newline bitfld.long 0x00 2. "CLEAR,Clear LETIMER" "0,1" bitfld.long 0x00 1. "STOP,Stop LETIMER" "0,1" newline bitfld.long 0x00 0. "START,Start LETIMER" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 0. "RUNNING,LETIMER Running" "0,1" group.long 0x0C++0x03 line.long 0x00 "CNT,Counter Value Register" hexmask.long.word 0x00 0.--15. 1. "CNT,Counter Value" group.long 0x10++0x03 line.long 0x00 "COMP0,Compare Value Register 0" hexmask.long.word 0x00 0.--15. 1. "COMP0,Compare Value 0" group.long 0x14++0x03 line.long 0x00 "COMP1,Compare Value Register 1" hexmask.long.word 0x00 0.--15. 1. "COMP1,Compare Value 1" group.long 0x18++0x03 line.long 0x00 "REP0,Repeat Counter Register 0" hexmask.long.byte 0x00 0.--7. 1. "REP0,Repeat Counter 0" group.long 0x1C++0x03 line.long 0x00 "REP1,Repeat Counter Register 1" hexmask.long.byte 0x00 0.--7. 1. "REP1,Repeat Counter 1" rgroup.long 0x20++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 4. "REP1,Repeat Counter 1 Interrupt Flag" "0,1" bitfld.long 0x00 3. "REP0,Repeat Counter 0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "UF,Underflow Interrupt Flag" "0,1" bitfld.long 0x00 1. "COMP1,Compare Match 1 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "COMP0,Compare Match 0 Interrupt Flag" "0,1" wgroup.long 0x24++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 4. "REP1,Set REP1 Interrupt Flag" "0,1" bitfld.long 0x00 3. "REP0,Set REP0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "UF,Set UF Interrupt Flag" "0,1" bitfld.long 0x00 1. "COMP1,Set COMP1 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "COMP0,Set COMP0 Interrupt Flag" "0,1" wgroup.long 0x28++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 4. "REP1,Clear REP1 Interrupt Flag" "0,1" bitfld.long 0x00 3. "REP0,Clear REP0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "UF,Clear UF Interrupt Flag" "0,1" bitfld.long 0x00 1. "COMP1,Clear COMP1 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "COMP0,Clear COMP0 Interrupt Flag" "0,1" group.long 0x2C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 4. "REP1,REP1 Interrupt Enable" "0,1" bitfld.long 0x00 3. "REP0,REP0 Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "UF,UF Interrupt Enable" "0,1" bitfld.long 0x00 1. "COMP1,COMP1 Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "COMP0,COMP0 Interrupt Enable" "0,1" rgroup.long 0x34++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 1. "CMD,CMD Register Busy" "0,1" group.long 0x40++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 1. "OUT1PEN,Output 1 Pin Enable" "0,1" bitfld.long 0x00 0. "OUT0PEN,Output 0 Pin Enable" "0,1" group.long 0x44++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 8.--13. "OUT1LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." bitfld.long 0x00 0.--5. "OUT0LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." group.long 0x50++0x03 line.long 0x00 "PRSSEL,PRS Input Select Register" bitfld.long 0x00 26.--27. "PRSCLEARMODE,PRS Clear Mode" "0: PRS cannot clear the LETIMER,1: Rising edge of selected PRS input can clear..,2: Falling edge of selected PRS input can clear..,3: Both the rising or falling edge of the.." bitfld.long 0x00 22.--23. "PRSSTOPMODE,PRS Stop Mode" "0: PRS cannot stop the LETIMER,1: Rising edge of selected PRS input can stop..,2: Falling edge of selected PRS input can stop..,3: Both the rising or falling edge of the.." newline bitfld.long 0x00 18.--19. "PRSSTARTMODE,PRS Start Mode" "0: PRS cannot start the LETIMER,1: Rising edge of selected PRS input can start..,2: Falling edge of selected PRS input can start..,3: Both the rising or falling edge of the.." bitfld.long 0x00 12.--15. "PRSCLEARSEL,PRS Clear Select" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 6.--9. "PRSSTOPSEL,PRS Stop Select" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" bitfld.long 0x00 0.--3. "PRSSTARTSEL,PRS Start Select" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" tree.end repeat.end tree.end tree "LEUART (LEUART0)" repeat 2. (list 0. 1.) (list ad:0x4006A000 ad:0x4006A400) tree "LEUART$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 14.--15. "TXDELAY,TX Delay Transmission" "0: Frames are transmitted immediately,1: Transmission of new frames are delayed by a..,2: Transmission of new frames are delayed by two..,3: Transmission of new frames are delayed by.." bitfld.long 0x00 13. "TXDMAWU,TX DMA Wakeup" "0,1" newline bitfld.long 0x00 12. "RXDMAWU,RX DMA Wakeup" "0,1" bitfld.long 0x00 11. "BIT8DV,Bit 8 Default Value" "0,1" newline bitfld.long 0x00 10. "MPAB,Multi-Processor Address-Bit" "0,1" bitfld.long 0x00 9. "MPM,Multi-Processor Mode" "0,1" newline bitfld.long 0x00 8. "SFUBRX,Start-Frame UnBlock RX" "0,1" bitfld.long 0x00 7. "LOOPBK,Loopback Enable" "0,1" newline bitfld.long 0x00 6. "ERRSDMA,Clear RX DMA on Error" "0,1" bitfld.long 0x00 5. "INV,Invert Input and Output" "0,1" newline bitfld.long 0x00 4. "STOPBITS,Stop-Bit Mode" "0,1" bitfld.long 0x00 2.--3. "PARITY,Parity-Bit Mode" "0: Parity bits are not used,?,2: Even parity are used,3: Odd parity is used" newline bitfld.long 0x00 1. "DATABITS,Data-Bit Mode" "0,1" bitfld.long 0x00 0. "AUTOTRI,Automatic Transmitter Tristate" "0,1" wgroup.long 0x04++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 7. "CLEARRX,Clear RX" "0,1" bitfld.long 0x00 6. "CLEARTX,Clear TX" "0,1" newline bitfld.long 0x00 5. "RXBLOCKDIS,Receiver Block Disable" "0,1" bitfld.long 0x00 4. "RXBLOCKEN,Receiver Block Enable" "0,1" newline bitfld.long 0x00 3. "TXDIS,Transmitter Disable" "0,1" bitfld.long 0x00 2. "TXEN,Transmitter Enable" "0,1" newline bitfld.long 0x00 1. "RXDIS,Receiver Disable" "0,1" bitfld.long 0x00 0. "RXEN,Receiver Enable" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 6. "TXIDLE,TX Idle" "0,1" bitfld.long 0x00 5. "RXDATAV,RX Data Valid" "0,1" newline bitfld.long 0x00 4. "TXBL,TX Buffer Level" "0,1" bitfld.long 0x00 3. "TXC,TX Complete" "0,1" newline bitfld.long 0x00 2. "RXBLOCK,Block Incoming Data" "0,1" bitfld.long 0x00 1. "TXENS,Transmitter Enable Status" "0,1" newline bitfld.long 0x00 0. "RXENS,Receiver Enable Status" "0,1" group.long 0x0C++0x03 line.long 0x00 "CLKDIV,Clock Control Register" hexmask.long.word 0x00 3.--16. 1. "DIV,Fractional Clock Divider" group.long 0x10++0x03 line.long 0x00 "STARTFRAME,Start Frame Register" hexmask.long.word 0x00 0.--8. 1. "STARTFRAME,Start Frame" group.long 0x14++0x03 line.long 0x00 "SIGFRAME,Signal Frame Register" hexmask.long.word 0x00 0.--8. 1. "SIGFRAME,Signal Frame" rgroup.long 0x18++0x03 line.long 0x00 "RXDATAX,Receive Buffer Data Extended Register" bitfld.long 0x00 15. "FERR,Receive Data Framing Error" "0,1" bitfld.long 0x00 14. "PERR,Receive Data Parity Error" "0,1" newline hexmask.long.word 0x00 0.--8. 1. "RXDATA,RX Data" rgroup.long 0x1C++0x03 line.long 0x00 "RXDATA,Receive Buffer Data Register" hexmask.long.byte 0x00 0.--7. 1. "RXDATA,RX Data" rgroup.long 0x20++0x03 line.long 0x00 "RXDATAXP,Receive Buffer Data Extended Peek Register" bitfld.long 0x00 15. "FERRP,Receive Data Framing Error Peek" "0,1" bitfld.long 0x00 14. "PERRP,Receive Data Parity Error Peek" "0,1" newline hexmask.long.word 0x00 0.--8. 1. "RXDATAP,RX Data Peek" group.long 0x24++0x03 line.long 0x00 "TXDATAX,Transmit Buffer Data Extended Register" bitfld.long 0x00 15. "RXENAT,Enable RX After Transmission" "0,1" bitfld.long 0x00 14. "TXDISAT,Disable TX After Transmission" "0,1" newline bitfld.long 0x00 13. "TXBREAK,Transmit Data as Break" "0,1" hexmask.long.word 0x00 0.--8. 1. "TXDATA,TX Data" group.long 0x28++0x03 line.long 0x00 "TXDATA,Transmit Buffer Data Register" hexmask.long.byte 0x00 0.--7. 1. "TXDATA,TX Data" rgroup.long 0x2C++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 10. "SIGF,Signal Frame Interrupt Flag" "0,1" bitfld.long 0x00 9. "STARTF,Start Frame Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "MPAF,Multi-Processor Address Frame Interrupt Flag" "0,1" bitfld.long 0x00 7. "FERR,Framing Error Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "PERR,Parity Error Interrupt Flag" "0,1" bitfld.long 0x00 5. "TXOF,TX Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXUF,RX Underflow Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXOF,RX Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "RXDATAV,RX Data Valid Interrupt Flag" "0,1" bitfld.long 0x00 1. "TXBL,TX Buffer Level Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,TX Complete Interrupt Flag" "0,1" wgroup.long 0x30++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 10. "SIGF,Set SIGF Interrupt Flag" "0,1" bitfld.long 0x00 9. "STARTF,Set STARTF Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "MPAF,Set MPAF Interrupt Flag" "0,1" bitfld.long 0x00 7. "FERR,Set FERR Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "PERR,Set PERR Interrupt Flag" "0,1" bitfld.long 0x00 5. "TXOF,Set TXOF Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXUF,Set RXUF Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXOF,Set RXOF Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,Set TXC Interrupt Flag" "0,1" wgroup.long 0x34++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 10. "SIGF,Clear SIGF Interrupt Flag" "0,1" bitfld.long 0x00 9. "STARTF,Clear STARTF Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "MPAF,Clear MPAF Interrupt Flag" "0,1" bitfld.long 0x00 7. "FERR,Clear FERR Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "PERR,Clear PERR Interrupt Flag" "0,1" bitfld.long 0x00 5. "TXOF,Clear TXOF Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXUF,Clear RXUF Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXOF,Clear RXOF Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,Clear TXC Interrupt Flag" "0,1" group.long 0x38++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 10. "SIGF,SIGF Interrupt Enable" "0,1" bitfld.long 0x00 9. "STARTF,STARTF Interrupt Enable" "0,1" newline bitfld.long 0x00 8. "MPAF,MPAF Interrupt Enable" "0,1" bitfld.long 0x00 7. "FERR,FERR Interrupt Enable" "0,1" newline bitfld.long 0x00 6. "PERR,PERR Interrupt Enable" "0,1" bitfld.long 0x00 5. "TXOF,TXOF Interrupt Enable" "0,1" newline bitfld.long 0x00 4. "RXUF,RXUF Interrupt Enable" "0,1" bitfld.long 0x00 3. "RXOF,RXOF Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "RXDATAV,RXDATAV Interrupt Enable" "0,1" bitfld.long 0x00 1. "TXBL,TXBL Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "TXC,TXC Interrupt Enable" "0,1" group.long 0x3C++0x03 line.long 0x00 "PULSECTRL,Pulse Control Register" bitfld.long 0x00 5. "PULSEFILT,Pulse Filter" "0,1" bitfld.long 0x00 4. "PULSEEN,Pulse Generator/Extender Enable" "0,1" newline bitfld.long 0x00 0.--3. "PULSEW,Pulse Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40++0x03 line.long 0x00 "FREEZE,Freeze Register" bitfld.long 0x00 0. "REGFREEZE,Register Update Freeze" "0,1" rgroup.long 0x44++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 7. "PULSECTRL,PULSECTRL Register Busy" "0,1" bitfld.long 0x00 6. "TXDATA,TXDATA Register Busy" "0,1" newline bitfld.long 0x00 5. "TXDATAX,TXDATAX Register Busy" "0,1" bitfld.long 0x00 4. "SIGFRAME,SIGFRAME Register Busy" "0,1" newline bitfld.long 0x00 3. "STARTFRAME,STARTFRAME Register Busy" "0,1" bitfld.long 0x00 2. "CLKDIV,CLKDIV Register Busy" "0,1" newline bitfld.long 0x00 1. "CMD,CMD Register Busy" "0,1" bitfld.long 0x00 0. "CTRL,CTRL Register Busy" "0,1" group.long 0x54++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 1. "TXPEN,TX Pin Enable" "0,1" bitfld.long 0x00 0. "RXPEN,RX Pin Enable" "0,1" group.long 0x58++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 8.--13. "TXLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." bitfld.long 0x00 0.--5. "RXLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." group.long 0x64++0x03 line.long 0x00 "INPUT,LEUART Input Register" bitfld.long 0x00 5. "RXPRS,PRS RX Enable" "0,1" bitfld.long 0x00 0.--3. "RXPRSSEL,RX PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" tree.end repeat.end tree.end tree "MSC" base ad:0x40000000 group.long 0x00++0x03 line.long 0x00 "CTRL,Memory System Control Register" bitfld.long 0x00 12. "WAITMODE,Peripheral Access Wait Mode" "0,1" bitfld.long 0x00 6. "EBIFAULTEN,EBI Bus Fault Response Enable" "0,1" newline bitfld.long 0x00 5. "RAMECCERRFAULTEN,Two Bit ECC Error Bus Fault Response Enable" "0,1" bitfld.long 0x00 4. "TIMEOUTFAULTEN,Timeout Bus Fault Response Enable" "0,1" newline bitfld.long 0x00 3. "IFCREADCLEAR,IFC Read Clears IF" "0,1" bitfld.long 0x00 2. "PWRUPONDEMAND,Power Up on Demand During Wake Up" "0,1" newline bitfld.long 0x00 1. "CLKDISFAULTEN,Clock-disabled Bus Fault Response Enable" "0,1" bitfld.long 0x00 0. "ADDRFAULTEN,Invalid Address Bus Fault Response Enable" "0,1" sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0x04++0x03 line.long 0x00 "READCTRL,Read Control Register" bitfld.long 0x00 28. "SCBTP,Suppress Conditional Branch Target Perfetch" "0,1" bitfld.long 0x00 24.--25. "MODE,Read Mode" "0: Zero wait-states inserted in fetch or read..,1: One wait-state inserted for each fetch or..,2: Two wait-states inserted for eatch fetch or..,3: Three wait-states inserted for eatch fetch or.." newline bitfld.long 0x00 10. "QSPICDIS,QSPI Cache Disable" "0,1" bitfld.long 0x00 9. "USEHPROT,AHB_HPROT Mode" "0,1" newline bitfld.long 0x00 8. "PREFETCH,Prefetch Mode" "0,1" bitfld.long 0x00 6. "EBICDIS,External Bus Interface Cache Disable" "0,1" newline bitfld.long 0x00 5. "ICCDIS,Interrupt Context Cache Disable" "0,1" bitfld.long 0x00 4. "AIDIS,Automatic Invalidate Disable" "0,1" newline bitfld.long 0x00 3. "IFCDIS,Internal Flash Cache Disable" "0,1" endif sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") group.long 0x04++0x03 line.long 0x00 "READCTRL,Read Control Register" bitfld.long 0x00 28. "SCBTP,Suppress Conditional Branch Target Perfetch" "0,1" bitfld.long 0x00 24.--25. "MODE,Read Mode" "0: Zero wait-states inserted in fetch or read..,1: One wait-state inserted for each fetch or..,2: Two wait-states inserted for eatch fetch or..,3: Three wait-states inserted for eatch fetch or.." newline bitfld.long 0x00 9. "USEHPROT,AHB_HPROT Mode" "0,1" bitfld.long 0x00 8. "PREFETCH,Prefetch Mode" "0,1" newline bitfld.long 0x00 6. "EBICDIS,External Bus Interface Cache Disable" "0,1" bitfld.long 0x00 5. "ICCDIS,Interrupt Context Cache Disable" "0,1" newline bitfld.long 0x00 4. "AIDIS,Automatic Invalidate Disable" "0,1" bitfld.long 0x00 3. "IFCDIS,Internal Flash Cache Disable" "0,1" endif group.long 0x08++0x03 line.long 0x00 "WRITECTRL,Write Control Register" bitfld.long 0x00 5. "RWWEN,Read-While-Write Enable" "0,1" bitfld.long 0x00 1. "IRQERASEABORT,Abort Page Erase on Interrupt" "0,1" newline bitfld.long 0x00 0. "WREN,Enable Write/Erase Controller" "0,1" wgroup.long 0x0C++0x03 line.long 0x00 "WRITECMD,Write Command Register" bitfld.long 0x00 12. "CLEARWDATA,Clear WDATA State" "0,1" bitfld.long 0x00 9. "ERASEMAIN1,Mass Erase Region 1" "0,1" newline bitfld.long 0x00 8. "ERASEMAIN0,Mass Erase Region 0" "0,1" bitfld.long 0x00 5. "ERASEABORT,Abort Erase Sequence" "0,1" newline bitfld.long 0x00 4. "WRITETRIG,Word Write Sequence Trigger" "0,1" bitfld.long 0x00 3. "WRITEONCE,Word Write-Once Trigger" "0,1" newline bitfld.long 0x00 2. "WRITEEND,End Write Mode" "0,1" bitfld.long 0x00 1. "ERASEPAGE,Erase Page" "0,1" newline bitfld.long 0x00 0. "LADDRIM,Load MSC_ADDRB Into ADDR" "0,1" group.long 0x10++0x03 line.long 0x00 "ADDRB,Page Erase/Write Address Buffer" hexmask.long 0x00 0.--31. 1. "ADDRB,Page Erase or Write Address Buffer" group.long 0x18++0x03 line.long 0x00 "WDATA,Write Data Register" hexmask.long 0x00 0.--31. 1. "WDATA,Write Data" rgroup.long 0x1C++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 28.--31. "PWRUPCKBDFAILCOUNT,Flash Power Up Checkerboard Pattern Check Fail Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24.--27. "WDATAVALID,Write Data Buffer Valid Flag" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 7. "BANKSWITCHED,BANK SWITCHING STATUS" "0,1" bitfld.long 0x00 6. "PCRUNNING,Performance Counters Running" "0,1" newline bitfld.long 0x00 5. "ERASEABORTED,The Current Flash Erase Operation Aborted" "0,1" bitfld.long 0x00 4. "WORDTIMEOUT,Flash Write Word Timeout" "0,1" newline bitfld.long 0x00 3. "WDATAREADY,WDATA Write Ready" "0,1" bitfld.long 0x00 2. "INVADDR,Invalid Write Address or Erase Page" "0,1" newline bitfld.long 0x00 1. "LOCKED,Access Locked" "0,1" bitfld.long 0x00 0. "BUSY,Erase/Write Busy" "0,1" rgroup.long 0x30++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 21. "RAM2ERR2B,RAM2 2-bit ECC Error Interrupt Flag" "0,1" bitfld.long 0x00 20. "RAM2ERR1B,RAM2 1-bit ECC Error Interrupt Flag" "0,1" newline bitfld.long 0x00 19. "RAM1ERR2B,RAM1 2-bit ECC Error Interrupt Flag" "0,1" bitfld.long 0x00 18. "RAM1ERR1B,RAM1 1-bit ECC Error Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "RAMERR2B,RAM 2-bit ECC Error Interrupt Flag" "0,1" bitfld.long 0x00 16. "RAMERR1B,RAM 1-bit ECC Error Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "LVEWRITE,Flash LVE Write Error Flag" "0,1" bitfld.long 0x00 6. "WDATAOV,Flash Controller Write Buffer Overflow" "0,1" newline bitfld.long 0x00 5. "ICACHERR,ICache RAM Parity Error Flag" "0,1" bitfld.long 0x00 4. "PWRUPF,Flash Power Up Sequence Complete Flag" "0,1" newline bitfld.long 0x00 3. "CMOF,Cache Misses Overflow Interrupt Flag" "0,1" bitfld.long 0x00 2. "CHOF,Cache Hits Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "WRITE,Write Done Interrupt Read Flag" "0,1" bitfld.long 0x00 0. "ERASE,Erase Done Interrupt Read Flag" "0,1" wgroup.long 0x34++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 21. "RAM2ERR2B,Set RAM2ERR2B Interrupt Flag" "0,1" bitfld.long 0x00 20. "RAM2ERR1B,Set RAM2ERR1B Interrupt Flag" "0,1" newline bitfld.long 0x00 19. "RAM1ERR2B,Set RAM1ERR2B Interrupt Flag" "0,1" bitfld.long 0x00 18. "RAM1ERR1B,Set RAM1ERR1B Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "RAMERR2B,Set RAMERR2B Interrupt Flag" "0,1" bitfld.long 0x00 16. "RAMERR1B,Set RAMERR1B Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "LVEWRITE,Set LVEWRITE Interrupt Flag" "0,1" bitfld.long 0x00 6. "WDATAOV,Set WDATAOV Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "ICACHERR,Set ICACHERR Interrupt Flag" "0,1" bitfld.long 0x00 4. "PWRUPF,Set PWRUPF Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "CMOF,Set CMOF Interrupt Flag" "0,1" bitfld.long 0x00 2. "CHOF,Set CHOF Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "WRITE,Set WRITE Interrupt Flag" "0,1" bitfld.long 0x00 0. "ERASE,Set ERASE Interrupt Flag" "0,1" wgroup.long 0x38++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 21. "RAM2ERR2B,Clear RAM2ERR2B Interrupt Flag" "0,1" bitfld.long 0x00 20. "RAM2ERR1B,Clear RAM2ERR1B Interrupt Flag" "0,1" newline bitfld.long 0x00 19. "RAM1ERR2B,Clear RAM1ERR2B Interrupt Flag" "0,1" bitfld.long 0x00 18. "RAM1ERR1B,Clear RAM1ERR1B Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "RAMERR2B,Clear RAMERR2B Interrupt Flag" "0,1" bitfld.long 0x00 16. "RAMERR1B,Clear RAMERR1B Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "LVEWRITE,Clear LVEWRITE Interrupt Flag" "0,1" bitfld.long 0x00 6. "WDATAOV,Clear WDATAOV Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "ICACHERR,Clear ICACHERR Interrupt Flag" "0,1" bitfld.long 0x00 4. "PWRUPF,Clear PWRUPF Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "CMOF,Clear CMOF Interrupt Flag" "0,1" bitfld.long 0x00 2. "CHOF,Clear CHOF Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "WRITE,Clear WRITE Interrupt Flag" "0,1" bitfld.long 0x00 0. "ERASE,Clear ERASE Interrupt Flag" "0,1" group.long 0x3C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 21. "RAM2ERR2B,RAM2ERR2B Interrupt Enable" "0,1" bitfld.long 0x00 20. "RAM2ERR1B,RAM2ERR1B Interrupt Enable" "0,1" newline bitfld.long 0x00 19. "RAM1ERR2B,RAM1ERR2B Interrupt Enable" "0,1" bitfld.long 0x00 18. "RAM1ERR1B,RAM1ERR1B Interrupt Enable" "0,1" newline bitfld.long 0x00 17. "RAMERR2B,RAMERR2B Interrupt Enable" "0,1" bitfld.long 0x00 16. "RAMERR1B,RAMERR1B Interrupt Enable" "0,1" newline bitfld.long 0x00 8. "LVEWRITE,LVEWRITE Interrupt Enable" "0,1" bitfld.long 0x00 6. "WDATAOV,WDATAOV Interrupt Enable" "0,1" newline bitfld.long 0x00 5. "ICACHERR,ICACHERR Interrupt Enable" "0,1" bitfld.long 0x00 4. "PWRUPF,PWRUPF Interrupt Enable" "0,1" newline bitfld.long 0x00 3. "CMOF,CMOF Interrupt Enable" "0,1" bitfld.long 0x00 2. "CHOF,CHOF Interrupt Enable" "0,1" newline bitfld.long 0x00 1. "WRITE,WRITE Interrupt Enable" "0,1" bitfld.long 0x00 0. "ERASE,ERASE Interrupt Enable" "0,1" group.long 0x40++0x03 line.long 0x00 "LOCK,Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,Configuration Lock" wgroup.long 0x44++0x03 line.long 0x00 "CACHECMD,Flash Cache Command Register" bitfld.long 0x00 2. "STOPPC,Stop Performance Counters" "0,1" bitfld.long 0x00 1. "STARTPC,Start Performance Counters" "0,1" newline bitfld.long 0x00 0. "INVCACHE,Invalidate Instruction Cache" "0,1" rgroup.long 0x48++0x03 line.long 0x00 "CACHEHITS,Cache Hits Performance Counter" hexmask.long.tbyte 0x00 0.--19. 1. "CACHEHITS,Cache Hits Since Last Performance Counter Start Command" rgroup.long 0x4C++0x03 line.long 0x00 "CACHEMISSES,Cache Misses Performance Counter" hexmask.long.tbyte 0x00 0.--19. 1. "CACHEMISSES,Cache Misses Since Last Performance Counter Start Command" group.long 0x54++0x03 line.long 0x00 "MASSLOCK,Mass Erase Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,Mass Erase Lock" group.long 0x5C++0x03 line.long 0x00 "STARTUP,Startup Control" bitfld.long 0x00 28.--30. "STWS,Startup Waitstates" "0,1,2,3,4,5,6,7" bitfld.long 0x00 26. "STWSAEN,Startup Waitstates Always Enable" "0,1" newline bitfld.long 0x00 25. "STWSEN,Startup Waitstates Enable" "0,1" bitfld.long 0x00 24. "ASTWAIT,Active Startup Wait" "0,1" newline hexmask.long.word 0x00 12.--21. 1. "STDLY1,Startup Delay 0" hexmask.long.word 0x00 0.--9. 1. "STDLY0,Startup Delay 0" group.long 0x70++0x03 line.long 0x00 "BANKSWITCHLOCK,Bank Switching Lock Register" hexmask.long.word 0x00 0.--15. 1. "BANKSWITCHLOCKKEY,Bank Switching Lock" wgroup.long 0x74++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 1. "SWITCHINGBANK,BANK SWITCHING COMMAND" "0,1" bitfld.long 0x00 0. "PWRUP,Flash Power Up Command" "0,1" group.long 0x90++0x03 line.long 0x00 "BOOTLOADERCTRL,Bootloader Read and Write Enable Write Once Register" bitfld.long 0x00 1. "BLWDIS,Flash Bootloader Write/Erase Disable" "0,1" bitfld.long 0x00 0. "BLRDIS,Flash Bootloader Read Disable" "0,1" wgroup.long 0x94++0x03 line.long 0x00 "AAPUNLOCKCMD,Software Unlock AAP Command Register" bitfld.long 0x00 0. "UNLOCKAAP,Software Unlock AAP Command" "0,1" group.long 0x98++0x03 line.long 0x00 "CACHECONFIG0,Cache Configuration Register 0" bitfld.long 0x00 0.--1. "CACHELPLEVEL,Instruction Cache Low-Power Level" "0: Base instruction cache functionality,1: Advanced buffering mode where the cache uses..,?,3: Minimum activity mode which allows the cache.." group.long 0x100++0x03 line.long 0x00 "RAMCTRL,RAM Control Enable Register" bitfld.long 0x00 18. "RAM2PREFETCHEN,RAM2 Prefetch Enable" "0,1" bitfld.long 0x00 17. "RAM2WSEN,RAM2 WAIT STATE Enable" "0,1" newline bitfld.long 0x00 10. "RAM1PREFETCHEN,RAM1 Prefetch Enable" "0,1" bitfld.long 0x00 9. "RAM1WSEN,RAM1 WAIT STATE Enable" "0,1" newline bitfld.long 0x00 2. "RAMPREFETCHEN,RAM Prefetch Enable" "0,1" bitfld.long 0x00 1. "RAMWSEN,RAM WAIT STATE Enable" "0,1" group.long 0x104++0x03 line.long 0x00 "ECCCTRL,RAM ECC Control Register" bitfld.long 0x00 5. "RAM2ECCCHKEN,RAM2 ECC Check Enable" "0,1" bitfld.long 0x00 4. "RAM2ECCEWEN,RAM2 ECC Write Enable" "0,1" newline bitfld.long 0x00 3. "RAM1ECCCHKEN,RAM1 ECC Check Enable" "0,1" bitfld.long 0x00 2. "RAM1ECCEWEN,RAM1 ECC Write Enable" "0,1" newline bitfld.long 0x00 1. "RAMECCCHKEN,RAM ECC Check Enable" "0,1" bitfld.long 0x00 0. "RAMECCEWEN,RAM ECC Write Enable" "0,1" rgroup.long 0x108++0x03 line.long 0x00 "RAMECCADDR,RAM ECC Error Address Register" hexmask.long 0x00 0.--31. 1. "RAMECCADDR,RAM ECC Error Address" rgroup.long 0x10C++0x03 line.long 0x00 "RAM1ECCADDR,RAM1 ECC Error Address Register" hexmask.long 0x00 0.--31. 1. "RAM1ECCADDR,RAM1 ECC Error Address" rgroup.long 0x110++0x03 line.long 0x00 "RAM2ECCADDR,RAM2 ECC Error Address Register" hexmask.long 0x00 0.--31. 1. "RAM2ECCADDR,RAM2 ECC Error Address" tree.end tree "PCNT (PCNT0)" repeat 3. (list 0. 1. 2.) (list ad:0x4006E000 ad:0x4006E400 ad:0x4006E800) tree "PCNT$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 31. "TOPBHFSEL,TOPB High Frequency Value Select" "0,1" bitfld.long 0x00 26.--29. "TCCPRSSEL,TCC PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" newline bitfld.long 0x00 25. "TCCPRSPOL,TCC PRS Polarity Select" "0,1" bitfld.long 0x00 24. "PRSGATEEN,PRS Gate Enable" "0,1" newline bitfld.long 0x00 22.--23. "TCCCOMP,Triggered Compare and Clear Compare Mode" "0: Compare match if PCNT_CNT is less than or..,1: Compare match if PCNT_CNT is greater than or..,2: Compare match if PCNT_CNT is less than or..,?..." bitfld.long 0x00 19.--20. "TCCPRESC,Set the LFA Prescaler for Triggered Compare and Clear" "0: Compare and clear event each LFA cycle,1: Compare and clear performed on every other..,2: Compare and clear performed on every 4th LFA..,3: Compare and clear performed on every 8th LFA.." newline bitfld.long 0x00 16.--17. "TCCMODE,Sets the Mode for Triggered Compare and Clear" "0: Triggered compare and clear not enabled,1: Compare and clear performed on each..,2: Compare and clear performed on positive PRS..,?..." bitfld.long 0x00 15. "EDGE,Edge Select" "0,1" newline bitfld.long 0x00 14. "CNTDIR,Non-Quadrature Mode Counter Direction Control" "0,1" bitfld.long 0x00 12.--13. "AUXCNTEV,Controls When the Auxiliary Counter Counts" "0: Never counts,1: Counts up on up-count events,2: Counts up on down-count events,3: Counts up on both up-count and down-count.." newline bitfld.long 0x00 10.--11. "CNTEV,Controls When the Counter Counts" "0: Counts up on up-count and down on down-count..,1: Only counts up on up-count events,2: Only counts down on down-count events,3: Never counts" bitfld.long 0x00 9. "S1CDIR,Count Direction Determined By S1" "0,1" newline bitfld.long 0x00 8. "HYST,Enable Hysteresis" "0,1" bitfld.long 0x00 7. "DEBUGHALT,Debug Mode Halt Enable" "0,1" newline bitfld.long 0x00 6. "AUXCNTRSTEN,Enable AUXCNT Reset" "0,1" bitfld.long 0x00 5. "CNTRSTEN,Enable CNT Reset" "0,1" newline bitfld.long 0x00 4. "RSTEN,Enable PCNT Clock Domain Reset" "0,1" bitfld.long 0x00 3. "FILT,Enable Digital Pulse Width Filter" "0,1" newline bitfld.long 0x00 0.--2. "MODE,Mode Select" "0: The module is disabled,1: Single input LFACLK oversampling mode..,2: Externally clocked single input counter mode..,3: Externally clocked quadrature decoder mode..,4: LFACLK oversampling quadrature decoder 1X..,5: LFACLK oversampling quadrature decoder 2X..,6: LFACLK oversampling quadrature decoder 4X..,?..." wgroup.long 0x04++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 1. "LTOPBIM,Load TOPB Immediately" "0,1" bitfld.long 0x00 0. "LCNTIM,Load CNT Immediately" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 0. "DIR,Current Counter Direction" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "CNT,Counter Value Register" hexmask.long.word 0x00 0.--15. 1. "CNT,Counter Value" rgroup.long 0x10++0x03 line.long 0x00 "TOP,Top Value Register" hexmask.long.word 0x00 0.--15. 1. "TOP,Counter Top Value" group.long 0x14++0x03 line.long 0x00 "TOPB,Top Value Buffer Register" hexmask.long.word 0x00 0.--15. 1. "TOPB,Counter Top Buffer" rgroup.long 0x18++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 5. "OQSTERR,Oversampling Quadrature State Error Interrupt" "0,1" bitfld.long 0x00 4. "TCC,Triggered Compare Interrupt Read Flag" "0,1" newline bitfld.long 0x00 3. "AUXOF,Auxiliary Overflow Interrupt Read Flag" "0,1" bitfld.long 0x00 2. "DIRCNG,Direction Change Detect Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "OF,Overflow Interrupt Read Flag" "0,1" bitfld.long 0x00 0. "UF,Underflow Interrupt Read Flag" "0,1" wgroup.long 0x1C++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 5. "OQSTERR,Set OQSTERR Interrupt Flag" "0,1" bitfld.long 0x00 4. "TCC,Set TCC Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "AUXOF,Set AUXOF Interrupt Flag" "0,1" bitfld.long 0x00 2. "DIRCNG,Set DIRCNG Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "OF,Set OF Interrupt Flag" "0,1" bitfld.long 0x00 0. "UF,Set UF Interrupt Flag" "0,1" wgroup.long 0x20++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 5. "OQSTERR,Clear OQSTERR Interrupt Flag" "0,1" bitfld.long 0x00 4. "TCC,Clear TCC Interrupt Flag" "0,1" newline bitfld.long 0x00 3. "AUXOF,Clear AUXOF Interrupt Flag" "0,1" bitfld.long 0x00 2. "DIRCNG,Clear DIRCNG Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "OF,Clear OF Interrupt Flag" "0,1" bitfld.long 0x00 0. "UF,Clear UF Interrupt Flag" "0,1" group.long 0x24++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 5. "OQSTERR,OQSTERR Interrupt Enable" "0,1" bitfld.long 0x00 4. "TCC,TCC Interrupt Enable" "0,1" newline bitfld.long 0x00 3. "AUXOF,AUXOF Interrupt Enable" "0,1" bitfld.long 0x00 2. "DIRCNG,DIRCNG Interrupt Enable" "0,1" newline bitfld.long 0x00 1. "OF,OF Interrupt Enable" "0,1" bitfld.long 0x00 0. "UF,UF Interrupt Enable" "0,1" group.long 0x2C++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 8.--13. "S1INLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." bitfld.long 0x00 0.--5. "S0INLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." group.long 0x40++0x03 line.long 0x00 "FREEZE,Freeze Register" bitfld.long 0x00 0. "REGFREEZE,Register Update Freeze" "0,1" rgroup.long 0x44++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 3. "OVSCFG,OVSCFG Register Busy" "0,1" bitfld.long 0x00 2. "TOPB,TOPB Register Busy" "0,1" newline bitfld.long 0x00 1. "CMD,CMD Register Busy" "0,1" bitfld.long 0x00 0. "CTRL,CTRL Register Busy" "0,1" rgroup.long 0x64++0x03 line.long 0x00 "AUXCNT,Auxiliary Counter Value Register" hexmask.long.word 0x00 0.--15. 1. "AUXCNT,Auxiliary Counter Value" group.long 0x68++0x03 line.long 0x00 "INPUT,PCNT Input Register" bitfld.long 0x00 11. "S1PRSEN,S1IN PRS Enable" "0,1" bitfld.long 0x00 6.--9. "S1PRSSEL,S1IN PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" newline bitfld.long 0x00 5. "S0PRSEN,S0IN PRS Enable" "0,1" bitfld.long 0x00 0.--3. "S0PRSSEL,S0IN PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" group.long 0x6C++0x03 line.long 0x00 "OVSCFG,Oversampling Config Register" bitfld.long 0x00 12. "FLUTTERRM,Flutter Remove" "0,1" hexmask.long.byte 0x00 0.--7. 1. "FILTLEN,Configure Filter Length for Inputs S0IN and S1IN" tree.end repeat.end tree.end tree "PDM (Pulse Density Modulation (Digital Microphone) Interface)" base ad:0x40028000 rgroup.long 0x00++0x03 line.long 0x00 "IPVERSION,IP Version ID" hexmask.long 0x00 0.--31. 1. "IPVERSION,IP VERSION" group.long 0x04++0x03 line.long 0x00 "EN,PDM Module enable Register" bitfld.long 0x00 0. "EN,Module enable" "0,1" group.long 0x08++0x03 line.long 0x00 "CTRL,PDM Core Control Register" bitfld.long 0x00 31. "OUTCLKEN,PDM Clock enable" "0,1" hexmask.long.word 0x00 8.--19. 1. "DSR,Down sampling rate of Decimation filter" newline bitfld.long 0x00 0.--4. "GAIN,Selects Gain factor of DCF" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" wgroup.long 0x0C++0x03 line.long 0x00 "CMD,PDM Core Command Register" bitfld.long 0x00 16. "FIFOFL,FIFO Flush" "0,1" bitfld.long 0x00 8. "CLEAR,Clear DCF" "0,1" newline bitfld.long 0x00 4. "STOP,Stop DCF" "0,1" bitfld.long 0x00 0. "START,Start DCF" "0,1" rgroup.long 0x10++0x03 line.long 0x00 "STATUS,PDM Status register" bitfld.long 0x00 8.--10. "FIFOCNT,FIFO CNT" "0,1,2,3,4,5,6,7" bitfld.long 0x00 5. "EMPTY,FIFO EMPTY Status" "0,1" newline bitfld.long 0x00 4. "FULL,FIFO FULL Status" "0,1" bitfld.long 0x00 0. "ACT,PDM is active" "0,1" group.long 0x14++0x03 line.long 0x00 "CFG0,PDM Core Configuration Register0" bitfld.long 0x00 27. "CH3CLKPOL,CH3 CLK Polarity" "0,1" bitfld.long 0x00 26. "CH2CLKPOL,CH2 CLK Polarity" "0,1" newline bitfld.long 0x00 25. "CH1CLKPOL,CH1 CLK Polarity" "0,1" bitfld.long 0x00 24. "CH0CLKPOL,CH0 CLK Polarity" "0,1" newline bitfld.long 0x00 17. "STEREOMODECH23,Stereo mode CH23" "0,1" bitfld.long 0x00 16. "STEREOMODECH01,Stereo mode CH01" "0,1" newline bitfld.long 0x00 12.--13. "FIFODVL,Data Valid level in FIFO" "0: Atleast one word,1: Two words,2: Three words,3: Four words" bitfld.long 0x00 8.--10. "DATAFORMAT,Filter output format" "0: Right aligned 16-bit left bits are sign..,1: Pack two 16-bit samples into one 32-bit word,2: Right aligned 24bit left bits are sign extended,3: 32 bit data,4: Left aligned 16-bit right bits are zeros,5: Left aligned 24-bit right bits are zeros,6: RAW 32 bit data from Integrator,?..." newline bitfld.long 0x00 4.--5. "NUMCH,Number of Channels" "0: Only one Channel,1: Two Channels,2: Three Channels,3: Four Channels" bitfld.long 0x00 0.--1. "FORDER,Filter order" "0: Second order filter,1: Third order filter,2: Fourth order filter,3: Fifth order filter" group.long 0x18++0x03 line.long 0x00 "CFG1,PDM Core Configuration Register1" hexmask.long.word 0x00 0.--9. 1. "PRESC,Prescalar Setting for PDM sample" rgroup.long 0x20++0x03 line.long 0x00 "RXDATA,PDM Received Data Register" hexmask.long 0x00 0.--31. 1. "RXDATA,PDM received data" rgroup.long 0x40++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 3. "UF,FIFO Undeflow Interrupt Flag" "0,1" bitfld.long 0x00 2. "OF,FIFO Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "DVL,Data Valid Level Interrupt Flag" "0,1" bitfld.long 0x00 0. "DV,Data Valid Interrupt Flag" "0,1" wgroup.long 0x44++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 3. "UF,Set UF Interrupt Flag" "0,1" bitfld.long 0x00 2. "OF,Set OF Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "DVL,Set DVL Interrupt Flag" "0,1" bitfld.long 0x00 0. "DV,Set DV Interrupt Flag" "0,1" wgroup.long 0x48++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 3. "UF,Clear UF Interrupt Flag" "0,1" bitfld.long 0x00 2. "OF,Clear OF Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "DVL,Clear DVL Interrupt Flag" "0,1" bitfld.long 0x00 0. "DV,Clear DV Interrupt Flag" "0,1" group.long 0x4C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 3. "UF,UF Interrupt Enable" "0,1" bitfld.long 0x00 2. "OF,OF Interrupt Enable" "0,1" newline bitfld.long 0x00 1. "DVL,DVL Interrupt Enable" "0,1" bitfld.long 0x00 0. "DV,DV Interrupt Enable" "0,1" group.long 0x50++0x03 line.long 0x00 "ROUTEPEN,I/O LOCATION Enable Register" bitfld.long 0x00 8. "CLKPEN,CLK I/O Enable" "0,1" bitfld.long 0x00 3. "DAT3PEN,DAT3 I/O Enable" "0,1" newline bitfld.long 0x00 2. "DAT2PEN,DAT2 I/O Enable" "0,1" bitfld.long 0x00 1. "DAT1PEN,DAT1 I/O Enable" "0,1" newline bitfld.long 0x00 0. "DAT0PEN,DAT0 I/O Enable" "0,1" group.long 0x54++0x03 line.long 0x00 "ROUTELOC0,I/O LOCATION Register" bitfld.long 0x00 24.--29. "DAT3LOC,I/O Location for DAT3 pins" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." bitfld.long 0x00 16.--21. "DAT2LOC,I/O Location for DAT2 pins" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." newline bitfld.long 0x00 8.--13. "DAT1LOC,I/O Location for DAT1 pins" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." bitfld.long 0x00 0.--5. "DAT0LOC,I/O Location for DAT0 pins" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." group.long 0x58++0x03 line.long 0x00 "ROUTELOC1,I/O LOCATION Register" bitfld.long 0x00 0.--5. "CLKLOC,I/O Location for CLK pin" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." rgroup.long 0x60++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 10. "CTRLREGBUSY,CTRLREGBUSY busy" "0,1" bitfld.long 0x00 8. "PRESCBUSY,PRESC Sync busy" "0,1" newline bitfld.long 0x00 3. "FIFOFLBUSY,FIFO Flush Sync busy" "0,1" bitfld.long 0x00 2. "CLEARBUSY,CLEAR sync busy" "0,1" newline bitfld.long 0x00 1. "STOPBUSY,STOP sync busy" "0,1" bitfld.long 0x00 0. "STARTBUSY,START sync busy" "0,1" tree.end tree "PRS" base ad:0x400E6000 wgroup.long 0x00++0x03 line.long 0x00 "SWPULSE,Software Pulse Register" bitfld.long 0x00 15. "CH15PULSE,Channel 15 Pulse Generation" "0,1" bitfld.long 0x00 14. "CH14PULSE,Channel 14 Pulse Generation" "0,1" newline bitfld.long 0x00 13. "CH13PULSE,Channel 13 Pulse Generation" "0,1" bitfld.long 0x00 12. "CH12PULSE,Channel 12 Pulse Generation" "0,1" newline bitfld.long 0x00 11. "CH11PULSE,Channel 11 Pulse Generation" "0,1" bitfld.long 0x00 10. "CH10PULSE,Channel 10 Pulse Generation" "0,1" newline bitfld.long 0x00 9. "CH9PULSE,Channel 9 Pulse Generation" "0,1" bitfld.long 0x00 8. "CH8PULSE,Channel 8 Pulse Generation" "0,1" newline bitfld.long 0x00 7. "CH7PULSE,Channel 7 Pulse Generation" "0,1" bitfld.long 0x00 6. "CH6PULSE,Channel 6 Pulse Generation" "0,1" newline bitfld.long 0x00 5. "CH5PULSE,Channel 5 Pulse Generation" "0,1" bitfld.long 0x00 4. "CH4PULSE,Channel 4 Pulse Generation" "0,1" newline bitfld.long 0x00 3. "CH3PULSE,Channel 3 Pulse Generation" "0,1" bitfld.long 0x00 2. "CH2PULSE,Channel 2 Pulse Generation" "0,1" newline bitfld.long 0x00 1. "CH1PULSE,Channel 1 Pulse Generation" "0,1" bitfld.long 0x00 0. "CH0PULSE,Channel 0 Pulse Generation" "0,1" group.long 0x04++0x03 line.long 0x00 "SWLEVEL,Software Level Register" bitfld.long 0x00 15. "CH15LEVEL,Channel 15 Software Level" "0,1" bitfld.long 0x00 14. "CH14LEVEL,Channel 14 Software Level" "0,1" newline bitfld.long 0x00 13. "CH13LEVEL,Channel 13 Software Level" "0,1" bitfld.long 0x00 12. "CH12LEVEL,Channel 12 Software Level" "0,1" newline bitfld.long 0x00 11. "CH11LEVEL,Channel 11 Software Level" "0,1" bitfld.long 0x00 10. "CH10LEVEL,Channel 10 Software Level" "0,1" newline bitfld.long 0x00 9. "CH9LEVEL,Channel 9 Software Level" "0,1" bitfld.long 0x00 8. "CH8LEVEL,Channel 8 Software Level" "0,1" newline bitfld.long 0x00 7. "CH7LEVEL,Channel 7 Software Level" "0,1" bitfld.long 0x00 6. "CH6LEVEL,Channel 6 Software Level" "0,1" newline bitfld.long 0x00 5. "CH5LEVEL,Channel 5 Software Level" "0,1" bitfld.long 0x00 4. "CH4LEVEL,Channel 4 Software Level" "0,1" newline bitfld.long 0x00 3. "CH3LEVEL,Channel 3 Software Level" "0,1" bitfld.long 0x00 2. "CH2LEVEL,Channel 2 Software Level" "0,1" newline bitfld.long 0x00 1. "CH1LEVEL,Channel 1 Software Level" "0,1" bitfld.long 0x00 0. "CH0LEVEL,Channel 0 Software Level" "0,1" group.long 0x08++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 15. "CH15PEN,CH15 Pin Enable" "0,1" bitfld.long 0x00 14. "CH14PEN,CH14 Pin Enable" "0,1" newline bitfld.long 0x00 13. "CH13PEN,CH13 Pin Enable" "0,1" bitfld.long 0x00 12. "CH12PEN,CH12 Pin Enable" "0,1" newline bitfld.long 0x00 11. "CH11PEN,CH11 Pin Enable" "0,1" bitfld.long 0x00 10. "CH10PEN,CH10 Pin Enable" "0,1" newline bitfld.long 0x00 9. "CH9PEN,CH9 Pin Enable" "0,1" bitfld.long 0x00 8. "CH8PEN,CH8 Pin Enable" "0,1" newline bitfld.long 0x00 7. "CH7PEN,CH7 Pin Enable" "0,1" bitfld.long 0x00 6. "CH6PEN,CH6 Pin Enable" "0,1" newline bitfld.long 0x00 5. "CH5PEN,CH5 Pin Enable" "0,1" bitfld.long 0x00 4. "CH4PEN,CH4 Pin Enable" "0,1" newline bitfld.long 0x00 3. "CH3PEN,CH3 Pin Enable" "0,1" bitfld.long 0x00 2. "CH2PEN,CH2 Pin Enable" "0,1" newline bitfld.long 0x00 1. "CH1PEN,CH1 Pin Enable" "0,1" bitfld.long 0x00 0. "CH0PEN,CH0 Pin Enable" "0,1" group.long 0x10++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 24.--29. "CH3LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." bitfld.long 0x00 16.--21. "CH2LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." newline bitfld.long 0x00 8.--13. "CH1LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." bitfld.long 0x00 0.--5. "CH0LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." group.long 0x14++0x03 line.long 0x00 "ROUTELOC1,I/O Routing Location Register" bitfld.long 0x00 24.--29. "CH7LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." bitfld.long 0x00 16.--21. "CH6LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." newline bitfld.long 0x00 8.--13. "CH5LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." bitfld.long 0x00 0.--5. "CH4LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." group.long 0x18++0x03 line.long 0x00 "ROUTELOC2,I/O Routing Location Register" bitfld.long 0x00 24.--29. "CH11LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." bitfld.long 0x00 16.--21. "CH10LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." newline bitfld.long 0x00 8.--13. "CH9LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." bitfld.long 0x00 0.--5. "CH8LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." group.long 0x1C++0x03 line.long 0x00 "ROUTELOC3,I/O Routing Location Register" bitfld.long 0x00 24.--29. "CH15LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." bitfld.long 0x00 16.--21. "CH14LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." newline bitfld.long 0x00 8.--13. "CH13LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." bitfld.long 0x00 0.--5. "CH12LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." group.long 0x30++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 1.--4. "SEVONPRSSEL,SEVONPRS PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" bitfld.long 0x00 0. "SEVONPRS,Set Event on PRS" "0,1" group.long 0x34++0x03 line.long 0x00 "DMAREQ0,DMA Request 0 Register" bitfld.long 0x00 6.--9. "PRSSEL,DMA Request 0 PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" group.long 0x38++0x03 line.long 0x00 "DMAREQ1,DMA Request 1 Register" bitfld.long 0x00 6.--9. "PRSSEL,DMA Request 1 PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" rgroup.long 0x40++0x03 line.long 0x00 "PEEK,PRS Channel Values" bitfld.long 0x00 15. "CH15VAL,Channel 15 Current Value" "0,1" bitfld.long 0x00 14. "CH14VAL,Channel 14 Current Value" "0,1" newline bitfld.long 0x00 13. "CH13VAL,Channel 13 Current Value" "0,1" bitfld.long 0x00 12. "CH12VAL,Channel 12 Current Value" "0,1" newline bitfld.long 0x00 11. "CH11VAL,Channel 11 Current Value" "0,1" bitfld.long 0x00 10. "CH10VAL,Channel 10 Current Value" "0,1" newline bitfld.long 0x00 9. "CH9VAL,Channel 9 Current Value" "0,1" bitfld.long 0x00 8. "CH8VAL,Channel 8 Current Value" "0,1" newline bitfld.long 0x00 7. "CH7VAL,Channel 7 Current Value" "0,1" bitfld.long 0x00 6. "CH6VAL,Channel 6 Current Value" "0,1" newline bitfld.long 0x00 5. "CH5VAL,Channel 5 Current Value" "0,1" bitfld.long 0x00 4. "CH4VAL,Channel 4 Current Value" "0,1" newline bitfld.long 0x00 3. "CH3VAL,Channel 3 Current Value" "0,1" bitfld.long 0x00 2. "CH2VAL,Channel 2 Current Value" "0,1" newline bitfld.long 0x00 1. "CH1VAL,Channel 1 Current Value" "0,1" bitfld.long 0x00 0. "CH0VAL,Channel 0 Current Value" "0,1" group.long 0x50++0x03 line.long 0x00 "CH0_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x54++0x03 line.long 0x00 "CH1_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x58++0x03 line.long 0x00 "CH2_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x5C++0x03 line.long 0x00 "CH3_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x60++0x03 line.long 0x00 "CH4_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x64++0x03 line.long 0x00 "CH5_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x68++0x03 line.long 0x00 "CH6_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x6C++0x03 line.long 0x00 "CH7_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x70++0x03 line.long 0x00 "CH8_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x74++0x03 line.long 0x00 "CH9_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x78++0x03 line.long 0x00 "CH10_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x7C++0x03 line.long 0x00 "CH11_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x80++0x03 line.long 0x00 "CH12_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x84++0x03 line.long 0x00 "CH13_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x88++0x03 line.long 0x00 "CH14_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" group.long 0x8C++0x03 line.long 0x00 "CH15_CTRL,Channel Control Register" bitfld.long 0x00 30. "ASYNC,Asynchronous Reflex" "0,1" bitfld.long 0x00 28. "ANDNEXT,And Next" "0,1" newline bitfld.long 0x00 27. "ORPREV,Or Previous" "0,1" bitfld.long 0x00 26. "INV,Invert Channel" "0,1" newline bitfld.long 0x00 25. "STRETCH,Stretch Channel Output" "0,1" bitfld.long 0x00 20.--21. "EDSEL,Edge Detect Select" "0: Signal is left as it is,1: A one HFCLK cycle pulse is generated for..,2: A one HFCLK clock cycle pulse is generated..,3: A one HFCLK clock cycle pulse is generated.." newline hexmask.long.byte 0x00 8.--14. 1. "SOURCESEL,Source Select" bitfld.long 0x00 0.--2. "SIGSEL,Signal Select" "0,1,2,3,4,5,6,7" tree.end sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") tree "QSPI0" base ad:0x4001C400 group.long 0x00++0x03 line.long 0x00 "CONFIG,Octal-SPI Configuration Register" rbitfld.long 0x00 31. "IDLE,Serial Interface and Low Level SPI Pipeline is IDLE" "0,1" bitfld.long 0x00 30. "DUALBYTEOPCODEEN,Dual-byte Opcode Mode Enable Bit" "0,1" newline bitfld.long 0x00 29. "CRCENABLE,CRC Enable Bit" "0,1" bitfld.long 0x00 25. "PIPELINEPHY,Pipeline PHY Mode Enable" "0,1" newline bitfld.long 0x00 24. "ENABLEDTRPROTOCOL,Enable DTR Protocol" "0,1" bitfld.long 0x00 23. "ENABLEAHBDECODER,Enable Address Decoder" "0,1" newline bitfld.long 0x00 19.--22. "MSTRBAUDDIV,Master Mode Baud Rate Divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 18. "ENTERXIPMODEIMM,Enter XIP Mode Immediately" "0,1" newline bitfld.long 0x00 17. "ENTERXIPMODE,Enter XIP Mode on Next" "0,1" bitfld.long 0x00 16. "ENBAHBADDRREMAP,Enable Address Remapping" "0,1" newline bitfld.long 0x00 14. "WRPROTFLASH,Write Protect Flash Pin" "0,1" bitfld.long 0x00 10.--11. "PERIPHCSLINES,Peripheral Chip Select Lines" "0,1,2,3" newline bitfld.long 0x00 9. "PERIPHSELDEC,Peripheral Select Decode" "0,1" bitfld.long 0x00 8. "ENBLEGACYIPMODE,Legacy IP Mode Enable" "0,1" newline bitfld.long 0x00 7. "ENBDIRACCCTLR,Enable Direct Access Controller" "0,1" bitfld.long 0x00 6. "DEVRSTCONFIG,Device Reset Configuration" "0,1" newline bitfld.long 0x00 5. "ENBDEVRST,Enable Device Reset" "0,1" bitfld.long 0x00 4. "ENBDEVHOLD,Enable Device Hold" "0,1" newline bitfld.long 0x00 3. "PHYMODEENABLE,PHY Mode Enable" "0,1" bitfld.long 0x00 2. "SELCLKPHASE,Clock Phase CPHA" "0,1" newline bitfld.long 0x00 1. "SELCLKPOL,Clock Polarity CPOL" "0,1" bitfld.long 0x00 0. "ENBSPI,QSPI Enable" "0,1" group.long 0x04++0x03 line.long 0x00 "DEVINSTRRDCONFIG,Device Read Instruction Configuration Register" bitfld.long 0x00 24.--28. "DUMMYRDCLKCYCLES,Dummy Read Clock Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20. "MODEBITENABLE,Mode Bit Enable" "0,1" newline bitfld.long 0x00 16.--17. "DATAXFERTYPEEXTMODE,Data Transfer Type for Standard SPI Modes" "0,1,2,3" bitfld.long 0x00 12.--13. "ADDRXFERTYPESTDMODE,Address Transfer Type for Standard SPI Modes" "0,1,2,3" newline bitfld.long 0x00 10. "DDREN,DDR Enable" "0,1" bitfld.long 0x00 8.--9. "INSTRTYPE,Instruction Type" "0,1,2,3" newline hexmask.long.byte 0x00 0.--7. 1. "RDOPCODENONXIP,Read Opcode in Non-XIP Mode" group.long 0x08++0x03 line.long 0x00 "DEVINSTRWRCONFIG,Device Write Instruction Configuration Register" bitfld.long 0x00 24.--28. "DUMMYWRCLKCYCLES,Dummy Write Clock Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--17. "DATAXFERTYPEEXTMODE,Data Transfer Type for Standard SPI Modes" "0,1,2,3" newline bitfld.long 0x00 12.--13. "ADDRXFERTYPESTDMODE,Address Transfer Type for Standard SPI Modes" "0,1,2,3" bitfld.long 0x00 8. "WELDIS,WEL Disable" "0,1" newline hexmask.long.byte 0x00 0.--7. 1. "WROPCODE,Write Opcode" group.long 0x0C++0x03 line.long 0x00 "DEVDELAY,Device Delay Register" hexmask.long.byte 0x00 24.--31. 1. "DNSS,Clock Delay for Chip Select Deassert" hexmask.long.byte 0x00 16.--23. 1. "DBTWN,Clock Delay Between Two Chip Selects" newline hexmask.long.byte 0x00 8.--15. 1. "DAFTER,Clock Delay for Last Transaction Bit" hexmask.long.byte 0x00 0.--7. 1. "DINIT,Clock Delay for CS" group.long 0x10++0x03 line.long 0x00 "RDDATACAPTURE,Read Data Capture Register" bitfld.long 0x00 16.--19. "DDRREADDELAY,DDR Read Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8. "DQSENABLE,DQS Enable Bit" "0,1" newline bitfld.long 0x00 1.--4. "DELAY,Read Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. "BYPASS,Bypass the Adapted Loopback Clock Circuit" "0,1" group.long 0x14++0x03 line.long 0x00 "DEVSIZECONFIG,Device Size Configuration Register" bitfld.long 0x00 23.--24. "MEMSIZEONCS1,Size of Flash Device Connected to CS[1] Pin" "0,1,2,3" bitfld.long 0x00 21.--22. "MEMSIZEONCS0,Size of Flash Device Connected to CS[0] Pin" "0,1,2,3" newline bitfld.long 0x00 16.--20. "BYTESPERSUBSECTOR,Number of Bytes Per Block" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.word 0x00 4.--15. 1. "BYTESPERDEVICEPAGE,Number of Bytes Per Device Page" newline bitfld.long 0x00 0.--3. "NUMADDRBYTES,Number of Address Bytes" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x03 line.long 0x00 "SRAMPARTITIONCFG,SRAM Partition Configuration Register" hexmask.long.byte 0x00 0.--7. 1. "ADDR,Indirect Read Partition Size" group.long 0x1C++0x03 line.long 0x00 "INDAHBADDRTRIGGER,Indirect Address Trigger Register" hexmask.long 0x00 0.--31. 1. "ADDR,Indirect Address Trigger Register" group.long 0x24++0x03 line.long 0x00 "REMAPADDR,Remap Address Register" hexmask.long 0x00 0.--31. 1. "VALUE,Remap Address Value" group.long 0x28++0x03 line.long 0x00 "MODEBITCONFIG,Mode Bit Configuration Register" hexmask.long.byte 0x00 24.--31. 1. "RXCRCDATALOW,RX CRC Data (lower)" hexmask.long.byte 0x00 16.--23. 1. "RXCRCDATAUP,RX CRC Data (upper)" newline bitfld.long 0x00 15. "CRCOUTENABLE,CRC# Output Enable Bit" "0,1" bitfld.long 0x00 8.--10. "CHUNKSIZE,Chunk Size" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 0.--7. 1. "MODE,Mode Bits" rgroup.long 0x2C++0x03 line.long 0x00 "SRAMFILL,SRAM Fill Register" hexmask.long.word 0x00 16.--31. 1. "SRAMFILLINDACWRITE,SRAM Fill Level (Indirect Write Partition)" hexmask.long.word 0x00 0.--15. 1. "SRAMFILLINDACREAD,SRAM Fill Level (Indirect Read Partition)" group.long 0x30++0x03 line.long 0x00 "TXTHRESH,TX Threshold Register" bitfld.long 0x00 0.--4. "LEVEL,Threshold Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x34++0x03 line.long 0x00 "RXTHRESH,RX Threshold Register" bitfld.long 0x00 0.--4. "LEVEL,Threshold Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x38++0x03 line.long 0x00 "WRITECOMPLETIONCTRL,Write Completion Control Register" hexmask.long.byte 0x00 24.--31. 1. "POLLREPDELAY,Poll Repetition Delay" hexmask.long.byte 0x00 16.--23. 1. "POLLCOUNT,Poll Count" newline bitfld.long 0x00 15. "ENABLEPOLLINGEXP,Enable Polling Expiration" "0,1" bitfld.long 0x00 14. "DISABLEPOLLING,Disable Polling" "0,1" newline bitfld.long 0x00 13. "POLLINGPOLARITY,Polling Polarity" "0,1" bitfld.long 0x00 8.--10. "POLLINGBITINDEX,Polling Bit Index" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 0.--7. 1. "OPCODE,Opcode" group.long 0x3C++0x03 line.long 0x00 "NOOFPOLLSBEFEXP,Polling Expiration Register" hexmask.long 0x00 0.--31. 1. "NOOFPOLLSBEFEXP,Number of Polls Cycles Before Expiration" group.long 0x40++0x03 line.long 0x00 "IRQSTATUS,Interrupt Status Register" bitfld.long 0x00 18. "TXCRCCHUNKBRK,TX CRC Chunk Was Broken" "0,1" bitfld.long 0x00 17. "RXCRCDATAVAL,RX CRC Data Valid" "0,1" newline bitfld.long 0x00 16. "RXCRCDATAERR,RX CRC Data Error" "0,1" bitfld.long 0x00 14. "STIGREQINT,The Controller is Ready for Getting Another STIG Request" "0,1" newline bitfld.long 0x00 13. "POLLEXPINT,The Maximum Number of Programmed Polls Cycles is Expired" "0,1" bitfld.long 0x00 12. "INDRDSRAMFULL,Indirect Read Partition Overflow" "0,1" newline bitfld.long 0x00 11. "RXFIFOFULL,Small RX FIFO Full" "0,1" bitfld.long 0x00 10. "RXFIFONOTEMPTY,Small RX FIFO Not Empty" "0,1" newline bitfld.long 0x00 9. "TXFIFOFULL,Small TX FIFO Full" "0,1" bitfld.long 0x00 8. "TXFIFONOTFULL,Small TX FIFO Not Full" "0,1" newline bitfld.long 0x00 7. "RECVOVERFLOW,Receive Overflow" "0,1" bitfld.long 0x00 6. "INDIRECTXFERLEVELBREACH,Indirect Transfer Watermark Level Breached" "0,1" newline bitfld.long 0x00 5. "ILLEGALACCESSDET,Illegal Memory Access Has Been Detected" "0,1" bitfld.long 0x00 4. "PROTWRATTEMPT,Write to Protected Area Was Attempted and Rejected" "0,1" newline bitfld.long 0x00 3. "INDIRECTREADREJECT,Indirect Operation Was Requested but Could Not Be Accepted" "0,1" bitfld.long 0x00 2. "INDIRECTOPDONE,Indirect Operation Complete" "0,1" newline bitfld.long 0x00 1. "UNDERFLOWDET,Underflow Detected" "0,1" bitfld.long 0x00 0. "MODEMFAIL,Mode M Failure" "0,1" group.long 0x44++0x03 line.long 0x00 "IRQMASK,Interrupt Mask" bitfld.long 0x00 18. "TXCRCCHUNKBRKMASK,TX CRC Chunk Was Broken Mask" "0,1" bitfld.long 0x00 17. "RXCRCDATAVALMASK,RX CRC Data Valid Mask" "0,1" newline bitfld.long 0x00 16. "RXCRCDATAERRMASK,RX CRC Data Error Mask" "0,1" bitfld.long 0x00 14. "STIGREQMASK,STIG Request Completion Mask" "0,1" newline bitfld.long 0x00 13. "POLLEXPINTMASK,Polling Expiration Detected Mask" "0,1" bitfld.long 0x00 12. "INDRDSRAMFULLMASK,Indirect Read Partition Overflow Mask" "0,1" newline bitfld.long 0x00 11. "RXFIFOFULLMASK,Small RX FIFO Full Mask" "0,1" bitfld.long 0x00 10. "RXFIFONOTEMPTYMASK,Small RX FIFO Not Empty Mask" "0,1" newline bitfld.long 0x00 9. "TXFIFOFULLMASK,Small TX FIFO Full Mask" "0,1" bitfld.long 0x00 8. "TXFIFONOTFULLMASK,Small TX FIFO Not Full Mask" "0,1" newline bitfld.long 0x00 7. "RECVOVERFLOWMASK,Receive Overflow Mask" "0,1" bitfld.long 0x00 6. "INDIRECTXFERLEVELBREACHMASK,Transfer Watermark Breach Mask" "0,1" newline bitfld.long 0x00 5. "ILLEGALACCESSDETMASK,Illegal Access Detected Mask" "0,1" bitfld.long 0x00 4. "PROTWRATTEMPTMASK,Protected Area Write Attempt Mask" "0,1" newline bitfld.long 0x00 3. "INDIRECTREADREJECTMASK,Indirect Read Reject Mask" "0,1" bitfld.long 0x00 2. "INDIRECTOPDONEMASK,Indirect Complete Mask" "0,1" newline bitfld.long 0x00 1. "UNDERFLOWDETMASK,Underflow Detected Mask" "0,1" bitfld.long 0x00 0. "MODEMFAILMASK,Mode M Failure Mask" "0,1" group.long 0x50++0x03 line.long 0x00 "LOWERWRPROT,Lower Write Protection Register" hexmask.long 0x00 0.--31. 1. "SUBSECTOR,Lower Block Number" group.long 0x54++0x03 line.long 0x00 "UPPERWRPROT,Upper Write Protection Register" hexmask.long 0x00 0.--31. 1. "SUBSECTOR,Upper Block Number" group.long 0x58++0x03 line.long 0x00 "WRPROTCTRL,Write Protection Control Register" bitfld.long 0x00 1. "ENB,Write Protection Enable Bit" "0,1" bitfld.long 0x00 0. "INV,Write Protection Inversion Bit" "0,1" group.long 0x60++0x03 line.long 0x00 "INDIRECTREADXFERCTRL,Indirect Read Transfer Control Register" rbitfld.long 0x00 6.--7. "NUMINDOPSDONE,Number Indirect Operations Done" "0,1,2,3" bitfld.long 0x00 5. "INDOPSDONESTATUS,Indirect Completion Status" "0,1" newline rbitfld.long 0x00 4. "RDQUEUED,Two Indirect Read Operations Have Been Queued" "0,1" bitfld.long 0x00 3. "SRAMFULL,SRAM Full" "0,1" newline rbitfld.long 0x00 2. "RDSTATUS,Indirect Read Status" "0,1" bitfld.long 0x00 1. "CANCEL,Cancel Indirect" "0,1" newline bitfld.long 0x00 0. "START,Start Indirect" "0,1" group.long 0x64++0x03 line.long 0x00 "INDIRECTREADXFERWATERMARK,Indirect Read Transfer Watermark Register" hexmask.long 0x00 0.--31. 1. "LEVEL,Watermark Value" group.long 0x68++0x03 line.long 0x00 "INDIRECTREADXFERSTART,Indirect Read Transfer Start Address Register" hexmask.long 0x00 0.--31. 1. "ADDR,Indirect Read Transfer Start Address" group.long 0x6C++0x03 line.long 0x00 "INDIRECTREADXFERNUMBYTES,Indirect Read Transfer Number Bytes Register" hexmask.long 0x00 0.--31. 1. "VALUE,Indirect Read Transfer Number Bytes" group.long 0x70++0x03 line.long 0x00 "INDIRECTWRITEXFERCTRL,Indirect Write Transfer Control Register" rbitfld.long 0x00 6.--7. "NUMINDOPSDONE,Indirect Operations Done" "0,1,2,3" bitfld.long 0x00 5. "INDOPSDONESTATUS,Indirect Completion Status" "0,1" newline rbitfld.long 0x00 4. "WRQUEUED,Two Indirect Write Operations Have Been Queued" "0,1" rbitfld.long 0x00 2. "WRSTATUS,Indirect Write Status" "0,1" newline bitfld.long 0x00 1. "CANCEL,Cancel Indirect" "0,1" bitfld.long 0x00 0. "START,Start Indirect" "0,1" group.long 0x74++0x03 line.long 0x00 "INDIRECTWRITEXFERWATERMARK,Indirect Write Transfer Watermark Register" hexmask.long 0x00 0.--31. 1. "LEVEL,Watermark Value" group.long 0x78++0x03 line.long 0x00 "INDIRECTWRITEXFERSTART,Indirect Write Transfer Start Address Register" hexmask.long 0x00 0.--31. 1. "ADDR,Start of Indirect Access" group.long 0x7C++0x03 line.long 0x00 "INDIRECTWRITEXFERNUMBYTES,Indirect Write Transfer Number Bytes Register" hexmask.long 0x00 0.--31. 1. "VALUE,Indirect Number of Bytes" group.long 0x80++0x03 line.long 0x00 "INDIRECTTRIGGERADDRRANGE,Indirect Trigger Address Range Register" bitfld.long 0x00 0.--3. "INDRANGEWIDTH,Indirect Trigger Address Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8C++0x03 line.long 0x00 "FLASHCOMMANDCTRLMEM,Flash Command Control Memory Register (STIG)" hexmask.long.word 0x00 20.--28. 1. "MEMBANKADDR,Memory Bank Address" bitfld.long 0x00 16.--18. "NBOFSTIGREADBYTES,Number of Read Bytes for the Extended STIG" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 8.--15. 1. "MEMBANKREADDATA,Last Requested Data From the STIG Memory Bank" rbitfld.long 0x00 1. "MEMBANKREQINPROGRESS,Memory Bank Data Request in Progress" "0,1" newline bitfld.long 0x00 0. "TRIGGERMEMBANKREQ,Trigger the Memory Bank Data Request" "0,1" group.long 0x90++0x03 line.long 0x00 "FLASHCMDCTRL,Flash Command Control Register (STIG)" hexmask.long.byte 0x00 24.--31. 1. "CMDOPCODE,Command Opcode" bitfld.long 0x00 23. "ENBREADDATA,Read Data Enable" "0,1" newline bitfld.long 0x00 20.--22. "NUMRDDATABYTES,Number of Read Data Bytes" "0,1,2,3,4,5,6,7" bitfld.long 0x00 19. "ENBCOMDADDR,Command Address Enable" "0,1" newline bitfld.long 0x00 18. "ENBMODEBIT,Mode Bit Enable" "0,1" bitfld.long 0x00 16.--17. "NUMADDRBYTES,Number of Address Bytes" "0,1,2,3" newline bitfld.long 0x00 15. "ENBWRITEDATA,Write Data Enable" "0,1" bitfld.long 0x00 12.--14. "NUMWRDATABYTES,Number of Write Data Bytes" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 7.--11. "NUMDUMMYCYCLES,Number of Dummy Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 2. "STIGMEMBANKEN,STIG Memory Bank Enable Bit" "0,1" newline rbitfld.long 0x00 1. "CMDEXECSTATUS,Command Execution in Progress" "0,1" bitfld.long 0x00 0. "CMDEXEC,Execute the Command" "0,1" group.long 0x94++0x03 line.long 0x00 "FLASHCMDADDR,Flash Command Address Register (STIG)" hexmask.long 0x00 0.--31. 1. "ADDR,Command Address" rgroup.long 0xA0++0x03 line.long 0x00 "FLASHRDDATALOWER,Flash Command Read Data Register (Lower) (STIG)" hexmask.long 0x00 0.--31. 1. "DATA,Read Data Lower" rgroup.long 0xA4++0x03 line.long 0x00 "FLASHRDDATAUPPER,Flash Command Read Data Register (Upper) (STIG)" hexmask.long 0x00 0.--31. 1. "DATA,Read Data Upper" group.long 0xA8++0x03 line.long 0x00 "FLASHWRDATALOWER,Flash Command Write Data Register (Lower) (STIG)" hexmask.long 0x00 0.--31. 1. "DATA,Command Write Data Lower Byte" group.long 0xAC++0x03 line.long 0x00 "FLASHWRDATAUPPER,Flash Command Write Data Register (Upper) (STIG)" hexmask.long 0x00 0.--31. 1. "DATA,Command Write Data Upper Byte" group.long 0xB0++0x03 line.long 0x00 "POLLINGFLASHSTATUS,Polling Flash Status Register" bitfld.long 0x00 16.--19. "DEVICESTATUSNBDUMMY,Auto-polling Dummy Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rbitfld.long 0x00 8. "DEVICESTATUSVALID,Device Status Valid" "0,1" newline hexmask.long.byte 0x00 0.--7. 1. "DEVICESTATUS,Device Status" group.long 0xB4++0x03 line.long 0x00 "PHYCONFIGURATION,PHY Configuration Register" bitfld.long 0x00 31. "PHYCONFIGRESYNC,PHY Config Resync" "0,1" hexmask.long.byte 0x00 16.--22. 1. "PHYCONFIGTXDLLDELAY,TX DLL Delay" newline hexmask.long.byte 0x00 0.--6. 1. "PHYCONFIGRXDLLDELAY,RX DLL Delay" group.long 0xE0++0x03 line.long 0x00 "OPCODEEXTLOWER,Opcode Extension Register (Lower)" hexmask.long.byte 0x00 24.--31. 1. "EXTREADOPCODE,Read Opcode Extension" hexmask.long.byte 0x00 16.--23. 1. "EXTWRITEOPCODE,Write Opcode Extension" newline hexmask.long.byte 0x00 8.--15. 1. "EXTPOLLOPCODE,Polling Opcode Extension" hexmask.long.byte 0x00 0.--7. 1. "EXTSTIGOPCODE,STIG Opcode Extension" group.long 0xE4++0x03 line.long 0x00 "OPCODEEXTUPPER,Opcode Extension Register (Upper)" hexmask.long.byte 0x00 24.--31. 1. "WELOPCODE,WEL Opcode" hexmask.long.byte 0x00 16.--23. 1. "EXTWELOPCODE,WEL Opcode Extension" rgroup.long 0xFC++0x03 line.long 0x00 "MODULEID,Module ID Register" hexmask.long.byte 0x00 24.--31. 1. "FIXPATCH,Fix/patch Number" hexmask.long.word 0x00 8.--23. 1. "MODULEID,Module/Revision ID Number" newline bitfld.long 0x00 0.--1. "CONF,Configuration ID Number" "0,1,2,3" group.long 0x104++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 17. "RST1PEN,RST1 Pin Enable" "0,1" bitfld.long 0x00 16. "RST0PEN,RST0 Pin Enable" "0,1" newline bitfld.long 0x00 14. "SCLKINPEN,SCLKIN Pin Enable" "0,1" bitfld.long 0x00 13. "DQSPEN,DQS Pin Enable" "0,1" newline bitfld.long 0x00 12. "DQ7PEN,DQ7 Pin Enable" "0,1" bitfld.long 0x00 11. "DQ6PEN,DQ6 Pin Enable" "0,1" newline bitfld.long 0x00 10. "DQ5PEN,DQ5 Pin Enable" "0,1" bitfld.long 0x00 9. "DQ4PEN,DQ4 Pin Enable" "0,1" newline bitfld.long 0x00 8. "DQ3PEN,DQ3 Pin Enable" "0,1" bitfld.long 0x00 7. "DQ2PEN,DQ2 Pin Enable" "0,1" newline bitfld.long 0x00 6. "DQ1PEN,DQ1 Pin Enable" "0,1" bitfld.long 0x00 5. "DQ0PEN,DQ0 Pin Enable" "0,1" newline bitfld.long 0x00 2. "CS1PEN,CS1 Pin Enable" "0,1" bitfld.long 0x00 1. "CS0PEN,CS0 Pin Enable" "0,1" newline bitfld.long 0x00 0. "SCLKPEN,SCLK Pin Enable" "0,1" group.long 0x108++0x03 line.long 0x00 "ROUTELOC0,I/O Route Location Register 0" bitfld.long 0x00 6.--11. "QSPIRSTLOC,I/O Location" "0: Location 0,1: Location 1,?..." bitfld.long 0x00 0.--5. "QSPILOC,I/O Location" "0: Location 0,1: Location 1,?..." tree.end endif tree "RMU" base ad:0x400E5000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 24.--25. "RESETSTATE,System Software Reset State" "0,1,2,3" bitfld.long 0x00 12.--14. "PINRMODE,PIN Reset Mode" "0: Reset request is blocked,1: The CRYOTIMER DEBUGGER RTCC are not reset,2: The CRYOTIMER DEBUGGER are not reset,?,4: The entire device is reset except some EMU..,?..." newline bitfld.long 0x00 8.--10. "SYSRMODE,Core Sysreset Reset Mode" "0: Reset request is blocked,1: The CRYOTIMER DEBUGGER RTCC are not reset,2: The CRYOTIMER DEBUGGER are not reset,?,4: The entire device is reset except some EMU..,?..." bitfld.long 0x00 4.--6. "LOCKUPRMODE,Core LOCKUP Reset Mode" "0: Reset request is blocked,1: The CRYOTIMER DEBUGGER RTCC are not reset,2: The CRYOTIMER DEBUGGER are not reset,?,4: The entire device is reset except some EMU..,?..." newline bitfld.long 0x00 0.--2. "WDOGRMODE,WDOG Reset Mode" "0: Reset request is blocked,1: The CRYOTIMER DEBUGGER RTCC are not reset,2: The CRYOTIMER DEBUGGER are not reset,?,4: The entire device is reset except some EMU..,?..." rgroup.long 0x04++0x03 line.long 0x00 "RSTCAUSE,Reset Cause Register" bitfld.long 0x00 16. "EM4RST,EM4 Reset" "0,1" bitfld.long 0x00 12. "BUMODERST,Backup Mode Reset" "0,1" newline bitfld.long 0x00 11. "WDOGRST,Watchdog Reset" "0,1" bitfld.long 0x00 10. "SYSREQRST,System Request Reset" "0,1" newline bitfld.long 0x00 9. "LOCKUPRST,LOCKUP Reset" "0,1" bitfld.long 0x00 8. "EXTRST,External Pin Reset" "0,1" newline bitfld.long 0x00 4. "DECBOD,Brown Out Detector Decouple Domain Reset" "0,1" bitfld.long 0x00 3. "DVDDBOD,Brown Out Detector DVDD Reset" "0,1" newline bitfld.long 0x00 2. "AVDDBOD,Brown Out Detector AVDD Reset" "0,1" bitfld.long 0x00 0. "PORST,Power on Reset" "0,1" wgroup.long 0x08++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 0. "RCCLR,Reset Cause Clear" "0,1" group.long 0x0C++0x03 line.long 0x00 "RST,Reset Control Register" group.long 0x10++0x03 line.long 0x00 "LOCK,Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,Configuration Lock Key" tree.end tree "RTC (Real-time Counter)" base ad:0x40060000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 2. "COMP0TOP,Compare Channel 0 is Top Value" "0,1" bitfld.long 0x00 1. "DEBUGRUN,Debug Mode Run Enable" "0,1" newline bitfld.long 0x00 0. "EN,RTC Enable" "0,1" group.long 0x04++0x03 line.long 0x00 "CNT,Counter Value Register" hexmask.long.tbyte 0x00 0.--23. 1. "CNT,Counter Value" rgroup.long 0x08++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 1.--6. "COMP,Compare Match X Interrupt Flag" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0. "OF,Overflow Interrupt Flag" "0,1" wgroup.long 0x0C++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 1.--6. "COMP,Set COMP Interrupt Flag" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0. "OF,Set OF Interrupt Flag" "0,1" wgroup.long 0x10++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 1.--6. "COMP,Clear COMP Interrupt Flag" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0. "OF,Clear OF Interrupt Flag" "0,1" group.long 0x14++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 1.--6. "COMP,COMP Interrupt Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0. "OF,OF Interrupt Enable" "0,1" group.long 0x20++0x03 line.long 0x00 "COMPA_COMP,Compare Value Register X" hexmask.long.tbyte 0x00 0.--23. 1. "COMP,Compare Value" group.long 0x24++0x03 line.long 0x00 "COMPB_COMP,Compare Value Register X" hexmask.long.tbyte 0x00 0.--23. 1. "COMP,Compare Value" group.long 0x28++0x03 line.long 0x00 "COMPC_COMP,Compare Value Register X" hexmask.long.tbyte 0x00 0.--23. 1. "COMP,Compare Value" group.long 0x2C++0x03 line.long 0x00 "COMPD_COMP,Compare Value Register X" hexmask.long.tbyte 0x00 0.--23. 1. "COMP,Compare Value" group.long 0x30++0x03 line.long 0x00 "COMPE_COMP,Compare Value Register X" hexmask.long.tbyte 0x00 0.--23. 1. "COMP,Compare Value" group.long 0x34++0x03 line.long 0x00 "COMPF_COMP,Compare Value Register X" hexmask.long.tbyte 0x00 0.--23. 1. "COMP,Compare Value" tree.end tree "RTCC" base ad:0x40062000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 17. "LYEARCORRDIS,Leap Year Correction Disabled" "0,1" bitfld.long 0x00 16. "CNTMODE,Main Counter Mode" "0,1" newline bitfld.long 0x00 15. "OSCFDETEN,Oscillator Failure Detection Enable" "0,1" bitfld.long 0x00 14. "BUMODETSEN,Backup Mode Timestamp Enable" "0,1" newline bitfld.long 0x00 12. "CNTTICK,Counter Prescaler Mode" "0,1" bitfld.long 0x00 8.--11. "CNTPRESC,Counter Prescaler Value" "0: CLKCNT = LFECLKRTCC/1,1: CLKCNT = LFECLKRTCC/2,2: CLKCNT = LFECLKRTCC/4,3: CLKCNT = LFECLKRTCC/8,4: CLKCNT = LFECLKRTCC/16,5: CLKCNT = LFECLKRTCC/32,6: CLKCNT = LFECLKRTCC/64,7: CLKCNT = LFECLKRTCC/128,8: CLKCNT = LFECLKRTCC/256,9: CLKCNT = LFECLKRTCC/512,10: CLKCNT = LFECLKRTCC/1024,11: CLKCNT = LFECLKRTCC/2048,12: CLKCNT = LFECLKRTCC/4096,13: CLKCNT = LFECLKRTCC/8192,14: CLKCNT = LFECLKRTCC/16384,15: CLKCNT = LFECLKRTCC/32768" newline bitfld.long 0x00 5. "CCV1TOP,CCV1 Top Value Enable" "0,1" bitfld.long 0x00 4. "PRECCV0TOP,Pre-counter CCV0 Top Value Enable" "0,1" newline bitfld.long 0x00 2. "DEBUGRUN,Debug Mode Run Enable" "0,1" bitfld.long 0x00 0. "ENABLE,RTCC Enable" "0,1" group.long 0x04++0x03 line.long 0x00 "PRECNT,Pre-Counter Value Register" hexmask.long.word 0x00 0.--14. 1. "PRECNT,Pre-Counter Value" group.long 0x08++0x03 line.long 0x00 "CNT,Counter Value Register" hexmask.long 0x00 0.--31. 1. "CNT,Counter Value" rgroup.long 0x0C++0x03 line.long 0x00 "COMBCNT,Combined Pre-Counter and Counter Value Register" hexmask.long.tbyte 0x00 15.--31. 1. "CNTLSB,Counter Value" hexmask.long.word 0x00 0.--14. 1. "PRECNT,Pre-Counter Value" group.long 0x10++0x03 line.long 0x00 "TIME,Time of Day Register" bitfld.long 0x00 20.--21. "HOURT,Hours Tens" "0,1,2,3" bitfld.long 0x00 16.--19. "HOURU,Hours Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--14. "MINT,Minutes Tens" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--11. "MINU,Minutes Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--6. "SECT,Seconds Tens" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--3. "SECU,Seconds Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x14++0x03 line.long 0x00 "DATE,Date Register" bitfld.long 0x00 24.--26. "DAYOW,Day of Week" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20.--23. "YEART,Year Tens" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 16.--19. "YEARU,Year Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12. "MONTHT,Month Tens" "0,1" newline bitfld.long 0x00 8.--11. "MONTHU,Month Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--5. "DAYOMT,Day of Month Tens" "0,1,2,3" newline bitfld.long 0x00 0.--3. "DAYOMU,Day of Month Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x18++0x03 line.long 0x00 "IF,RTCC Interrupt Flags" bitfld.long 0x00 10. "MONTHTICK,Month Tick" "0,1" bitfld.long 0x00 9. "DAYOWOF,Day of Week Overflow" "0,1" newline bitfld.long 0x00 8. "DAYTICK,Day Tick" "0,1" bitfld.long 0x00 7. "HOURTICK,Hour Tick" "0,1" newline bitfld.long 0x00 6. "MINTICK,Minute Tick" "0,1" bitfld.long 0x00 5. "CNTTICK,Main Counter Tick" "0,1" newline bitfld.long 0x00 4. "OSCFAIL,Oscillator Failure Interrupt Flag" "0,1" bitfld.long 0x00 3. "CC2,Channel 2 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CC1,Channel 1 Interrupt Flag" "0,1" bitfld.long 0x00 1. "CC0,Channel 0 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Overflow Interrupt Flag" "0,1" wgroup.long 0x1C++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 10. "MONTHTICK,Set MONTHTICK Interrupt Flag" "0,1" bitfld.long 0x00 9. "DAYOWOF,Set DAYOWOF Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "DAYTICK,Set DAYTICK Interrupt Flag" "0,1" bitfld.long 0x00 7. "HOURTICK,Set HOURTICK Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "MINTICK,Set MINTICK Interrupt Flag" "0,1" bitfld.long 0x00 5. "CNTTICK,Set CNTTICK Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "OSCFAIL,Set OSCFAIL Interrupt Flag" "0,1" bitfld.long 0x00 3. "CC2,Set CC2 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CC1,Set CC1 Interrupt Flag" "0,1" bitfld.long 0x00 1. "CC0,Set CC0 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Set OF Interrupt Flag" "0,1" wgroup.long 0x20++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 10. "MONTHTICK,Clear MONTHTICK Interrupt Flag" "0,1" bitfld.long 0x00 9. "DAYOWOF,Clear DAYOWOF Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "DAYTICK,Clear DAYTICK Interrupt Flag" "0,1" bitfld.long 0x00 7. "HOURTICK,Clear HOURTICK Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "MINTICK,Clear MINTICK Interrupt Flag" "0,1" bitfld.long 0x00 5. "CNTTICK,Clear CNTTICK Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "OSCFAIL,Clear OSCFAIL Interrupt Flag" "0,1" bitfld.long 0x00 3. "CC2,Clear CC2 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CC1,Clear CC1 Interrupt Flag" "0,1" bitfld.long 0x00 1. "CC0,Clear CC0 Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Clear OF Interrupt Flag" "0,1" group.long 0x24++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 10. "MONTHTICK,MONTHTICK Interrupt Enable" "0,1" bitfld.long 0x00 9. "DAYOWOF,DAYOWOF Interrupt Enable" "0,1" newline bitfld.long 0x00 8. "DAYTICK,DAYTICK Interrupt Enable" "0,1" bitfld.long 0x00 7. "HOURTICK,HOURTICK Interrupt Enable" "0,1" newline bitfld.long 0x00 6. "MINTICK,MINTICK Interrupt Enable" "0,1" bitfld.long 0x00 5. "CNTTICK,CNTTICK Interrupt Enable" "0,1" newline bitfld.long 0x00 4. "OSCFAIL,OSCFAIL Interrupt Enable" "0,1" bitfld.long 0x00 3. "CC2,CC2 Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "CC1,CC1 Interrupt Enable" "0,1" bitfld.long 0x00 1. "CC0,CC0 Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "OF,OF Interrupt Enable" "0,1" rgroup.long 0x28++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 0. "BUMODETS,Timestamp for Backup Mode Entry Stored" "0,1" wgroup.long 0x2C++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 0. "CLRSTATUS,Clear RTCC_STATUS Register" "0,1" rgroup.long 0x30++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 5. "CMD,CMD Register Busy" "0,1" group.long 0x34++0x03 line.long 0x00 "POWERDOWN,Retention RAM Power-down Register" bitfld.long 0x00 0. "RAM,Retention RAM Power-down" "0,1" group.long 0x38++0x03 line.long 0x00 "LOCK,Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,Configuration Lock Key" group.long 0x3C++0x03 line.long 0x00 "EM4WUEN,Wake Up Enable" bitfld.long 0x00 0. "EM4WU,EM4 Wake-up Enable" "0,1" group.long 0x40++0x03 line.long 0x00 "CC0_CTRL,CC Channel Control Register" bitfld.long 0x00 17. "DAYCC,Day Capture/Compare Selection" "0,1" bitfld.long 0x00 12.--16. "COMPMASK,Capture Compare Channel Comparison Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 11. "COMPBASE,Capture Compare Channel Comparison Base" "0,1" bitfld.long 0x00 6.--9. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 4.--5. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 2.--3. "CMOA,Compare Match Output Action" "0: A single clock cycle pulse is generated on..,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" newline bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,?..." group.long 0x44++0x03 line.long 0x00 "CC0_CCV,Capture/Compare Value Register" hexmask.long 0x00 0.--31. 1. "CCV,Capture/Compare Value" group.long 0x48++0x03 line.long 0x00 "CC0_TIME,Capture/Compare Time Register" bitfld.long 0x00 20.--21. "HOURT,Hours Tens" "0,1,2,3" bitfld.long 0x00 16.--19. "HOURU,Hours Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--14. "MINT,Minutes Tens" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--11. "MINU,Minutes Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--6. "SECT,Seconds Tens" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--3. "SECU,Seconds Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4C++0x03 line.long 0x00 "CC0_DATE,Capture/Compare Date Register" bitfld.long 0x00 12. "MONTHT,Month Tens" "0,1" bitfld.long 0x00 8.--11. "MONTHU,Month Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "DAYT,Day of Month/week Tens" "0,1,2,3" bitfld.long 0x00 0.--3. "DAYU,Day of Month/week Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x50++0x03 line.long 0x00 "CC1_CTRL,CC Channel Control Register" bitfld.long 0x00 17. "DAYCC,Day Capture/Compare Selection" "0,1" bitfld.long 0x00 12.--16. "COMPMASK,Capture Compare Channel Comparison Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 11. "COMPBASE,Capture Compare Channel Comparison Base" "0,1" bitfld.long 0x00 6.--9. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 4.--5. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 2.--3. "CMOA,Compare Match Output Action" "0: A single clock cycle pulse is generated on..,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" newline bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,?..." group.long 0x54++0x03 line.long 0x00 "CC1_CCV,Capture/Compare Value Register" hexmask.long 0x00 0.--31. 1. "CCV,Capture/Compare Value" group.long 0x58++0x03 line.long 0x00 "CC1_TIME,Capture/Compare Time Register" bitfld.long 0x00 20.--21. "HOURT,Hours Tens" "0,1,2,3" bitfld.long 0x00 16.--19. "HOURU,Hours Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--14. "MINT,Minutes Tens" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--11. "MINU,Minutes Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--6. "SECT,Seconds Tens" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--3. "SECU,Seconds Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x5C++0x03 line.long 0x00 "CC1_DATE,Capture/Compare Date Register" bitfld.long 0x00 12. "MONTHT,Month Tens" "0,1" bitfld.long 0x00 8.--11. "MONTHU,Month Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "DAYT,Day of Month/week Tens" "0,1,2,3" bitfld.long 0x00 0.--3. "DAYU,Day of Month/week Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x60++0x03 line.long 0x00 "CC2_CTRL,CC Channel Control Register" bitfld.long 0x00 17. "DAYCC,Day Capture/Compare Selection" "0,1" bitfld.long 0x00 12.--16. "COMPMASK,Capture Compare Channel Comparison Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 11. "COMPBASE,Capture Compare Channel Comparison Base" "0,1" bitfld.long 0x00 6.--9. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 4.--5. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 2.--3. "CMOA,Compare Match Output Action" "0: A single clock cycle pulse is generated on..,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" newline bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,?..." group.long 0x64++0x03 line.long 0x00 "CC2_CCV,Capture/Compare Value Register" hexmask.long 0x00 0.--31. 1. "CCV,Capture/Compare Value" group.long 0x68++0x03 line.long 0x00 "CC2_TIME,Capture/Compare Time Register" bitfld.long 0x00 20.--21. "HOURT,Hours Tens" "0,1,2,3" bitfld.long 0x00 16.--19. "HOURU,Hours Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 12.--14. "MINT,Minutes Tens" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--11. "MINU,Minutes Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--6. "SECT,Seconds Tens" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--3. "SECU,Seconds Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x6C++0x03 line.long 0x00 "CC2_DATE,Capture/Compare Date Register" bitfld.long 0x00 12. "MONTHT,Month Tens" "0,1" bitfld.long 0x00 8.--11. "MONTHU,Month Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. "DAYT,Day of Month/week Tens" "0,1,2,3" bitfld.long 0x00 0.--3. "DAYU,Day of Month/week Units" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x104++0x03 line.long 0x00 "RET0_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x108++0x03 line.long 0x00 "RET1_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x10C++0x03 line.long 0x00 "RET2_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x110++0x03 line.long 0x00 "RET3_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x114++0x03 line.long 0x00 "RET4_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x118++0x03 line.long 0x00 "RET5_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x11C++0x03 line.long 0x00 "RET6_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x120++0x03 line.long 0x00 "RET7_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x124++0x03 line.long 0x00 "RET8_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x128++0x03 line.long 0x00 "RET9_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x12C++0x03 line.long 0x00 "RET10_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x130++0x03 line.long 0x00 "RET11_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x134++0x03 line.long 0x00 "RET12_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x138++0x03 line.long 0x00 "RET13_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x13C++0x03 line.long 0x00 "RET14_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x140++0x03 line.long 0x00 "RET15_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x144++0x03 line.long 0x00 "RET16_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x148++0x03 line.long 0x00 "RET17_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x14C++0x03 line.long 0x00 "RET18_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x150++0x03 line.long 0x00 "RET19_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x154++0x03 line.long 0x00 "RET20_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x158++0x03 line.long 0x00 "RET21_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x15C++0x03 line.long 0x00 "RET22_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x160++0x03 line.long 0x00 "RET23_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x164++0x03 line.long 0x00 "RET24_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x168++0x03 line.long 0x00 "RET25_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x16C++0x03 line.long 0x00 "RET26_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x170++0x03 line.long 0x00 "RET27_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x174++0x03 line.long 0x00 "RET28_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x178++0x03 line.long 0x00 "RET29_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x17C++0x03 line.long 0x00 "RET30_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" group.long 0x180++0x03 line.long 0x00 "RET31_REG,Retention Register" hexmask.long 0x00 0.--31. 1. "REG,General Purpose Retention Register" tree.end sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") tree "SDIO" base ad:0x400F1000 group.long 0x00++0x03 line.long 0x00 "SDMASYSADDR,SDMA System Address Register" hexmask.long 0x00 0.--31. 1. "SDMASYSADDRARG,Physical SYS Memory ADDR Used for DMA Transfers or the Second Argument for the Auto CMD23" group.long 0x04++0x03 line.long 0x00 "BLKSIZE,Block Size and Block Count Register" hexmask.long.word 0x00 16.--31. 1. "BLKSCNTFORCURRTFR,Blocks Count for Current Transfer" bitfld.long 0x00 12.--14. "HSTSDMABUFSIZE,Host SDMA Buffer Size" "0: 4KB(Detects A11 Carry out),1: 8KB(Detects A12 Carry out),2: 16KB(Detects A13 Carry out),3: 32KB(Detects A14 Carry out),4: 64KB(Detects A15 Carry out),5: 128KB(Detects A16 Carry out),6: 256KB(Detects A17 Carry out),7: 512KB(Detects A18 Carry out)" newline hexmask.long.word 0x00 0.--11. 1. "TFRBLKSIZE,Transfer Block Size Specifies the Block Size for Block Data Transfers for CMD17 CMD18 CMD24 CMD25 and CMD53" group.long 0x08++0x03 line.long 0x00 "CMDARG1,SD Command Argument Register" hexmask.long 0x00 0.--31. 1. "CMDARG1,Command Argument 1" group.long 0x0C++0x03 line.long 0x00 "TFRMODE,Transfer Mode and Command Register" bitfld.long 0x00 24.--29. "CMDINDEX,Command Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 22.--23. "CMDTYPE,Command Type" "0: Normal Command,1: Suspend command,2: Resume command,3: Abort command" newline bitfld.long 0x00 21. "DATPRESSEL,Data Present Select" "0,1" bitfld.long 0x00 20. "CMDINDXCHKEN,Command Index Check Enable" "0,1" newline bitfld.long 0x00 19. "CMDCRCCHKEN,Command CRC Check Enable" "0,1" bitfld.long 0x00 16.--17. "RESPTYPESEL,Response Type Select" "0: No RESP,1: RESP Length 136,2: RESP Length 48,3: RESP Length 48 check busy after RESP" newline bitfld.long 0x00 5. "MULTSINGBLKSEL,Multiple or Single Block Data Transfer Selection" "0,1" bitfld.long 0x00 4. "DATDIRSEL,Data Transfer Direction Select" "0,1" newline bitfld.long 0x00 2.--3. "AUTOCMDEN,Auto Command Enable" "0: Auto CMD Disabled,1: Auto CMD12 Enable,2: Auto CMD23 Enable,?..." bitfld.long 0x00 1. "BLKCNTEN,Block Count Enable" "0,1" newline bitfld.long 0x00 0. "DMAEN,DMA Enable" "0,1" rgroup.long 0x10++0x03 line.long 0x00 "RESP0,Response0 and Response1 Register" hexmask.long 0x00 0.--31. 1. "CMDRESP0,Command Response 0" rgroup.long 0x14++0x03 line.long 0x00 "RESP2,Response2 and Response3 Register" hexmask.long 0x00 0.--31. 1. "CMDRESP1,Command Response 1" rgroup.long 0x18++0x03 line.long 0x00 "RESP4,Response4 and Response5 Register" hexmask.long 0x00 0.--31. 1. "CMDRESP2,Command Response 2" rgroup.long 0x1C++0x03 line.long 0x00 "RESP6,Response6 and Response7 Register" hexmask.long 0x00 0.--31. 1. "CMDRESP3,Command Response 3" group.long 0x20++0x03 line.long 0x00 "BUFDATPORT,Buffer Data Register" hexmask.long 0x00 0.--31. 1. "BUFDAT,Buffer Data" rgroup.long 0x24++0x03 line.long 0x00 "PRSSTAT,Present State Register" bitfld.long 0x00 25.--28. "DAT7TO4SIGLVL,DAT[7:4] Line Signal Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 24. "CMDSIGLVL,Command Line Signal Level" "0,1" newline bitfld.long 0x00 20.--23. "DAT3TO0SIGLVL,DAT[3:0] Line Signal Level" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 19. "WRPROTSWPINLVL,Write Protect Switch Pin Level" "0,1" newline bitfld.long 0x00 18. "CARDDETPINLVL,Card Detect Pin Level" "0,1" bitfld.long 0x00 17. "CARDSTATESTABLE,Card State Stable Status" "0,1" newline bitfld.long 0x00 16. "CARDINS,Card Inserted Status" "0,1" bitfld.long 0x00 11. "BUFRDEN,Buffer Read Enable" "0,1" newline bitfld.long 0x00 10. "BUFFERWRITEENABLE,Buffer Write Enable" "0,1" bitfld.long 0x00 9. "RDTRANACT,Read Transfer Active" "0,1" newline bitfld.long 0x00 8. "WRTRANACT,Write Transfer Active" "0,1" bitfld.long 0x00 3. "RETUNINGREQ,Re-Tuning Request" "0,1" newline bitfld.long 0x00 2. "DATLINEACTIVE,DAT Line Active" "0,1" bitfld.long 0x00 1. "CMDINHIBITDAT,Command Inhibit (DAT)" "0,1" newline bitfld.long 0x00 0. "CMDINHIBITCMD,Command Inhibit (CMD)" "0,1" group.long 0x28++0x03 line.long 0x00 "HOSTCTRL1,Host Control1 Power Block Gap and Wakeup-up Control Register" bitfld.long 0x00 26. "WKUPEVNTENONCRM,Wakeup Event Enable on SD Card Removal" "0,1" bitfld.long 0x00 25. "WKUPEVNTENONCINS,Wakeup Event Enable on SD Card Insertion" "0,1" newline bitfld.long 0x00 24. "WKUPEVNTENONCARDINT,Wakeup Event Enable on Card Interrupt" "0,1" bitfld.long 0x00 23. "BOOTACKCHK,Boot Ack Check" "0,1" newline bitfld.long 0x00 22. "ALTBOOTEN,Alternate Boot Enable" "0,1" bitfld.long 0x00 21. "BOOTEN,Boot Enable" "0,1" newline bitfld.long 0x00 20. "SPIMODE,SPI Mode Enable" "0,1" bitfld.long 0x00 19. "INTATBLKGAP,Interrupt at Block Gap" "0,1" newline bitfld.long 0x00 18. "RDWAITCTRL,Read Wait Control" "0,1" bitfld.long 0x00 17. "CONTINUEREQ,Continue Request" "0,1" newline bitfld.long 0x00 16. "STOPATBLKGAPREQ,Stop at Block Gap Request" "0,1" bitfld.long 0x00 12. "HRDRST,Hardware Reset Signal" "0,1" newline bitfld.long 0x00 9.--11. "SDBUSVOLTSEL,SD Bus Voltage Select" "?,?,?,?,?,5: Select 1.8V,6: Select 3.0V,7: Select 3.3V" bitfld.long 0x00 8. "SDBUSPOWER,SD Bus Power" "0,1" newline bitfld.long 0x00 7. "CDSIGDET,Card Detetct Signal Detection" "0,1" bitfld.long 0x00 6. "CDTSTLVL,Card Detect Test Level" "0,1" newline bitfld.long 0x00 5. "EXTDATTRANWD,Extended Data Transfer Width" "0,1" bitfld.long 0x00 3.--4. "DMASEL,DMA Select" "0: SDMA selected,1: 32-bit ADMA1 selected,2: 32-bit ADMA2 selected,3: 64-bit ADMA2 selected" newline bitfld.long 0x00 2. "HSEN,High Speed Enable" "0,1" bitfld.long 0x00 1. "DATTRANWD,Data Transfer Width 1-bit or 4-bit Mode" "0,1" newline bitfld.long 0x00 0. "LEDCTRL,LED Control" "0,1" group.long 0x2C++0x03 line.long 0x00 "CLOCKCTRL,Clock Control Timeout Control and Software Register" bitfld.long 0x00 26. "SFTRSTDAT,Software Reset for DAT Line" "0,1" bitfld.long 0x00 25. "SFTRSTCMD,Software Reset for CMD Line" "0,1" newline bitfld.long 0x00 24. "SFTRSTA,Software Reset for All" "0,1" bitfld.long 0x00 16.--19. "DATTOUTCNTVAL,Data Timeout Counter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--15. 1. "SDCLKFREQSEL,SD_CLK Frequency Select" bitfld.long 0x00 6.--7. "UPPSDCLKFRE,Upper Bits of SD_CLK Frequency Select" "0,1,2,3" newline bitfld.long 0x00 5. "CLKGENSEL,Clock Generator Select" "0,1" bitfld.long 0x00 2. "SDCLKEN,SDIO_CLK Pin Clock Enable" "0,1" newline rbitfld.long 0x00 1. "INTCLKSTABLE,Internal Clock Stable" "0,1" bitfld.long 0x00 0. "INTCLKEN,Internal Clock Enable" "0,1" group.long 0x30++0x03 line.long 0x00 "IFCR,Normal and Error Interrupt Status Register" bitfld.long 0x00 28. "TARGETRESP,Specific Error STAT" "0,1" bitfld.long 0x00 25. "ADMAERR,ADMA Error" "0,1" newline bitfld.long 0x00 24. "AUTOCMDERR,Auto CMD Error" "0,1" bitfld.long 0x00 23. "CURRENTLIMITERR,Current Limit Error" "0,1" newline bitfld.long 0x00 22. "DATENDBITERR,Data End Bit Error" "0,1" bitfld.long 0x00 21. "DATCRCERR,Data CRC Error" "0,1" newline bitfld.long 0x00 20. "DATTOUTERR,Data Time-out Error" "0,1" bitfld.long 0x00 19. "CMDINDEXERR,Command Index Error" "0,1" newline bitfld.long 0x00 18. "CMDENDBITERR,Command End Bit Error" "0,1" bitfld.long 0x00 17. "CMDCRCERR,CMD CRC Error" "0,1" newline bitfld.long 0x00 16. "CMDTOUTERR,Command Timeout Error" "0,1" rbitfld.long 0x00 15. "ERRINT,Error Interrupt" "0,1" newline bitfld.long 0x00 14. "BOOTTERMINATE,Boot Terminate Interrupt" "0,1" bitfld.long 0x00 13. "BOOTACKRCV,Boot Ack Received" "0,1" newline rbitfld.long 0x00 12. "RETUNINGEVT,Re-Tunning Event" "0,1" rbitfld.long 0x00 8. "CARDINT,Card Interrupt" "0,1" newline bitfld.long 0x00 7. "CARDRM,Card Removal" "0,1" bitfld.long 0x00 6. "CARDINS,Card Insertion" "0,1" newline bitfld.long 0x00 5. "BFRRDRDY,Buffer Read Ready" "0,1" bitfld.long 0x00 4. "BFRWRRDY,Buffer Write Ready" "0,1" newline bitfld.long 0x00 3. "DMAINT,DMA Interrupt" "0,1" bitfld.long 0x00 2. "BLKGAPEVT,Block Gap Event" "0,1" newline bitfld.long 0x00 1. "TRANCOM,Transfer Complete" "0,1" bitfld.long 0x00 0. "CMDCOM,Command Complete" "0,1" group.long 0x34++0x03 line.long 0x00 "IFENC,Normal and Error Interrupt Status Enable Register" bitfld.long 0x00 28. "TARGETRESPEN,Target Response/Host Error Status Enable" "0,1" bitfld.long 0x00 26. "TUNINGERREN,Tuning Error Status Enable" "0,1" newline bitfld.long 0x00 25. "ADMAERREN,ADMA Error Status Enable" "0,1" bitfld.long 0x00 24. "AUTOCMDERREN,Auto CMD12 Error Status Enable" "0,1" newline bitfld.long 0x00 23. "CURRENTLIMITERREN,Current Limit Error Status Enable" "0,1" bitfld.long 0x00 22. "DATENDBITERREN,Data End Bit Error Status Enable" "0,1" newline bitfld.long 0x00 21. "DATCRCERREN,Data CRC Error Status Enable" "0,1" bitfld.long 0x00 20. "DATTOUTERREN,Data Timeout Error Status Enable" "0,1" newline bitfld.long 0x00 19. "CMDINDEXERREN,Command Index Error Status Enable" "0,1" bitfld.long 0x00 18. "CMDENDBITERREN,Command End Bit Error Status Enable" "0,1" newline bitfld.long 0x00 17. "CMDCRCERREN,Command CRC Error Status Enable" "0,1" bitfld.long 0x00 16. "CMDTOUTERREN,Command Time-out Error Status Enable" "0,1" newline bitfld.long 0x00 14. "BOOTTERMINATEEN,Boot Terminate Interrupt Signal Enable" "0,1" bitfld.long 0x00 13. "BOOTACKRCVEN,Boot Ack Received Signal Enable" "0,1" newline bitfld.long 0x00 12. "RETUNINGEVTEN,Re-Tunning Event Signal Enable" "0,1" bitfld.long 0x00 8. "CARDINTEN,Card Interrupt Signal Enable" "0,1" newline bitfld.long 0x00 7. "CARDRMEN,Card Removal Signal Enable" "0,1" bitfld.long 0x00 6. "CARDINSEN,Card Insertion Signal Enable" "0,1" newline bitfld.long 0x00 5. "BUFRDRDYEN,Buffer Read Ready Signal Enable" "0,1" bitfld.long 0x00 4. "BUFWRRDYEN,Buffer Write Ready Signal Enable" "0,1" newline bitfld.long 0x00 3. "DMAINTEN,DMA Interrupt Signal Enable" "0,1" bitfld.long 0x00 2. "BLKGAPEVTEN,Block Gap Event Signal Enable" "0,1" newline bitfld.long 0x00 1. "TRANCOMEN,Transfer Complete Signal Enable" "0,1" bitfld.long 0x00 0. "CMDCOMEN,Command Complete Signal Enable" "0,1" group.long 0x38++0x03 line.long 0x00 "IEN,Normal and Error Interrupt Signal Enable Register" bitfld.long 0x00 28. "TARGETRESPERRSEN,Target Response Error Signal Enable" "0,1" bitfld.long 0x00 26. "TUNINGERRSIGNALENABLE,Tuning Error Signal Enable" "0,1" newline bitfld.long 0x00 25. "ADMAERRSEN,ADMA Error Signal Enable" "0,1" bitfld.long 0x00 24. "AUTOCMDERRSEN,Auto CMD12 Error Signal Enable" "0,1" newline bitfld.long 0x00 23. "CURRENTLIMITERRSEN,Current Limit Error Signal Enable" "0,1" bitfld.long 0x00 22. "DATENDBITERRSEN,Data End Bit Error Signal Enable" "0,1" newline bitfld.long 0x00 21. "DATCRCERRSEN,Data CRC Error Signal Enable" "0,1" bitfld.long 0x00 20. "DATTOUTERRSEN,Data Timeout Error Signal Enable" "0,1" newline bitfld.long 0x00 19. "CMDINDEXERRSEN,Command Index Error Signal Enable" "0,1" bitfld.long 0x00 18. "CMDENDBITERRSEN,Command End Bit Error Signal Enable" "0,1" newline bitfld.long 0x00 17. "CMDCRCERRSEN,Command CRC Error Signal Enable" "0,1" bitfld.long 0x00 16. "CMDTOUTERRSEN,Command Timeout Error Signal Enable" "0,1" newline bitfld.long 0x00 14. "BOOTTERMINATESEN,Boot Terminate Interrupt Signal Enable" "0,1" bitfld.long 0x00 13. "BOOTACKRCVSEN,Boot Ack Received Signal Enable" "0,1" newline bitfld.long 0x00 12. "RETUNINGEVTSEN,Re-Tuning Event Signal Enable" "0,1" bitfld.long 0x00 8. "CARDINTSEN,Card Interrupt Signal Enable" "0,1" newline bitfld.long 0x00 7. "CARDREMSEN,Card Removal Signal Enable" "0,1" bitfld.long 0x00 6. "CARDINSSEN,Card Insertion Signal Enable" "0,1" newline bitfld.long 0x00 5. "BUFRDRDYSEN,Buffer Read Ready Signal Enable" "0,1" bitfld.long 0x00 4. "BUFWRRDYSEN,Buffer Write Ready Signal Enable" "0,1" newline bitfld.long 0x00 3. "DMAINTSEN,DMA Interrupt Signal Enable" "0,1" bitfld.long 0x00 2. "BLKGAPEVTSEN,Block Gap Event Signal Enable" "0,1" newline bitfld.long 0x00 1. "TRANCOMSEN,Transfer Complete Signal Enable" "0,1" bitfld.long 0x00 0. "CMDCOMSEN,Command Complete Signal Enable" "0,1" group.long 0x3C++0x03 line.long 0x00 "AC12ERRSTAT,AUTO CMD12 Error Status and Host Control2 Register" bitfld.long 0x00 31. "PRSTVALEN,Preset Value Enable" "0,1" bitfld.long 0x00 30. "ASYNCINTEN,Asynchronous Interrupt Enable" "0,1" newline bitfld.long 0x00 23. "SAMPCLKSEL,Sampling Clock Select" "0,1" bitfld.long 0x00 22. "EXETUNING,Execute Tuning" "0,1" newline bitfld.long 0x00 20.--21. "DRVSTNSEL,Driver Strength Select" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" bitfld.long 0x00 19. "SIGEN1P8V,Voltage 1.8V Signal Enable" "0,1" newline bitfld.long 0x00 16.--18. "UHSMODESEL,UHS Mode Select" "0: SDR12,1: SDR25,2: SDR50,3: SDR104,4: DDR50,?..." rbitfld.long 0x00 7. "CNIBAC12ERR,Command Not Issued By Auto CMD12 Error" "0,1" newline rbitfld.long 0x00 4. "AC12INDEXERR,Auto CMD Index Error" "0,1" rbitfld.long 0x00 3. "AC12ENDBITERR,Auto CMD End Bit Error" "0,1" newline rbitfld.long 0x00 2. "AC12CRCERR,Auto CMD CRC Error" "0,1" rbitfld.long 0x00 1. "AC12TOE,Auto CMD12 Timeout Error" "0,1" newline rbitfld.long 0x00 0. "AC12NOTEXE,Auto CMD12 Not Executed" "0,1" rgroup.long 0x40++0x03 line.long 0x00 "CAPAB0,Capabilities Register to Hold Bits 31~0" bitfld.long 0x00 30.--31. "IFSLOTTYPE,Interface Card Slot Type" "0: Removable Card Slot,1: Only one non-removable device is conected to..,2: Can be set if Host controller supports Shared..,?..." bitfld.long 0x00 29. "ASYNCINTSUP,Asynchronous Interrupt Support" "0,1" newline bitfld.long 0x00 28. "SYSBUS64BSUP,System Bus 64-bit Support" "0,1" bitfld.long 0x00 26. "VOLTSUP1P8V,Voltage Support 1.8V" "0,1" newline bitfld.long 0x00 25. "VOLTSUP3P0V,Voltage Support 3.0V" "0,1" bitfld.long 0x00 24. "VOLTSUP3P3V,Voltage Support 3.3V" "0,1" newline bitfld.long 0x00 23. "SUSRESSUP,Suspend / Resume Support" "0,1" bitfld.long 0x00 22. "SDMASUP,SDMA Support" "0,1" newline bitfld.long 0x00 21. "HSSUP,High Speed Support" "0,1" bitfld.long 0x00 19. "ADMA2SUP,ADMA2 Support" "0,1" newline bitfld.long 0x00 18. "EXTMEDIABUSSUP,Extended Media Bus Support" "0,1" bitfld.long 0x00 16.--17. "MAXBLOCKLEN,Maximum Block Length" "0,1,2,3" newline hexmask.long.byte 0x00 8.--15. 1. "BASECLKFREQSD,Base Clock Frequency for SD_CLK" bitfld.long 0x00 7. "TMOUTCLKUNIT,Timeout Clock Unit" "0,1" newline bitfld.long 0x00 0.--5. "TMOUTCLKFREQ,Timeout Clock Frequency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" rgroup.long 0x44++0x03 line.long 0x00 "CAPAB2,Capabilities Register to Hold Bits 63~32" bitfld.long 0x00 25. "SPIBLOCKMODE,SPI Block Mode Support" "0,1" bitfld.long 0x00 24. "SPIMODE,SPI Mode Support" "0,1" newline hexmask.long.byte 0x00 16.--23. 1. "CLOCKKMUL,Clock Multiplier" bitfld.long 0x00 14.--15. "RETUNEMODES,Re-tuning Modes" "0,1,2,3" newline bitfld.long 0x00 13. "USETUNSDR50,Use Tuning for SDR50" "0,1" bitfld.long 0x00 8.--11. "TIMCNTRETUN,Timer Count for Re-Tuning" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 6. "DRVTYPDSUP,Driver Type D Support" "0,1" bitfld.long 0x00 5. "DRVTYPCSUP,Driver Type C Support" "0,1" newline bitfld.long 0x00 4. "DRVTYPASUP,Driver Type a Support" "0,1" bitfld.long 0x00 2. "DDR50SUP,DDR50 Support" "0,1" newline bitfld.long 0x00 1. "SDR104SUP,SDR104 Support" "0,1" bitfld.long 0x00 0. "SDR50SUP,SDR50 Support" "0,1" rgroup.long 0x48++0x03 line.long 0x00 "MAXCURCAPAB,Maximum Current Capabilities Register" hexmask.long.byte 0x00 16.--23. 1. "MAXCUR1P8VAL,Maximum Current for 1.8V" hexmask.long.byte 0x00 8.--15. 1. "MAXCUR3P0VAL,Maximum Current for 3.0V" newline hexmask.long.byte 0x00 0.--7. 1. "MAXCUR3P3VAL,Maximum Current for 3.3V" group.long 0x50++0x03 line.long 0x00 "FEVTERRSTAT,Force Event Register for Auto CMD Error Status" rbitfld.long 0x00 28.--31. "VENSPECE,Force Event for Vendox Specific Error Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rbitfld.long 0x00 26. "TUNINGE,Force Event for Tuning Errro" "0,1" newline bitfld.long 0x00 25. "ADMAE,Force Event for ADMA Error" "0,1" bitfld.long 0x00 24. "AC12E,Force Event for Auto CMD Error" "0,1" newline bitfld.long 0x00 23. "CURLIMITE,Force Event for Current Limit Error" "0,1" bitfld.long 0x00 22. "DATEBE,Force Event for Data End Bit Error" "0,1" newline bitfld.long 0x00 21. "DATCRCE,Force Event for Data CRC Error" "0,1" bitfld.long 0x00 20. "DATTOE,Force Event for Data Timeout Error" "0,1" newline bitfld.long 0x00 19. "CMDINDXE,Force Event for Command Index Error" "0,1" bitfld.long 0x00 18. "CMDEBE,Force Event for Command End Bit Error" "0,1" newline bitfld.long 0x00 17. "CMDCRCE,Force Event for Command CRC Error" "0,1" bitfld.long 0x00 16. "CMDTOE,Force Event for Command Timeout Error" "0,1" newline bitfld.long 0x00 7. "CNIBAC12E,Force Event for Command Not Issued By Auto CMD12 Error" "0,1" bitfld.long 0x00 4. "AC12INDXE,Force Event for Auto CMD Index Error" "0,1" newline bitfld.long 0x00 3. "AC12EBE,Force Event for Auto CMD End Bit Error" "0,1" bitfld.long 0x00 2. "AC12CRCE,Force Event for Auto CMD CRC Error" "0,1" newline bitfld.long 0x00 1. "AC12TOE,Force Event for Auto CMD Timeout Error" "0,1" bitfld.long 0x00 0. "AC12NEX,Force Event for Command Not Issued By Auto CM12 Not Executed" "0,1" rgroup.long 0x54++0x03 line.long 0x00 "ADMAES,ADMA Error Status Register" bitfld.long 0x00 2. "ADMALME,ADMA Length Mismatch Error" "0,1" bitfld.long 0x00 0.--1. "ADMAES,ADMA Error State" "0,1,2,3" group.long 0x58++0x03 line.long 0x00 "ADSADDR,ADMA System Address Register" hexmask.long 0x00 0.--31. 1. "ADSADDR,ADMA System Address" rgroup.long 0x60++0x03 line.long 0x00 "PRSTVAL0,Preset Value for Initialization and Default Speed Mode" bitfld.long 0x00 30.--31. "DSPDRVSTVAL,Driver Strength Select Value for Default Speed" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" bitfld.long 0x00 26. "DSPCLKGENVAL,Clock Generator Select Value for Default Speed" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "DSPSDCLKFREQVAL,SD_CLK Frequency Select Value for Default Speed" bitfld.long 0x00 14.--15. "INITDRVSTVAL,Driver Strength Select Value for Initialization" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" newline bitfld.long 0x00 10. "INITCLCKGENVAL,Clock Generator Select Value for Initialization" "0,1" hexmask.long.word 0x00 0.--9. 1. "INITSDCLKFREQVAL,SD_CLK Frequency Select Value for Initialization" rgroup.long 0x64++0x03 line.long 0x00 "PRSTVAL2,Preset Value for High Speed and SDR12 Modes" bitfld.long 0x00 30.--31. "SDR12DRVSTVAL,Driver Strength Select Value for SDR12" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" bitfld.long 0x00 26. "SDR12CLKGENVAL,Clock Generator Select Value for SDR12" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "SDR12SDCLKFREQVAL,SD_CLK Frequency Select Value for SDR12" bitfld.long 0x00 14.--15. "HSPDRVSTVAL,Driver Strength Select Value for High Speed" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" newline bitfld.long 0x00 10. "HSPCLKGENVAL,Clock Generator Select Value for High Speed" "0,1" hexmask.long.word 0x00 0.--9. 1. "HSPSDCLKFREQVAL,SD_CLK Frequency Select Value for High Speed" rgroup.long 0x68++0x03 line.long 0x00 "PRSTVAL4,Preset Value for SDR25 and SDR50 Modes" bitfld.long 0x00 30.--31. "SDR50DRVSTVAL,Driver Strength Select Value for SDR50" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" bitfld.long 0x00 26. "SDR50CLCKGENVAL,Clock Generator Select Value for SDR50" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "SDR50SDCLKFREQVAL,SD_CLK Frequency Select Value for SDR50" bitfld.long 0x00 14.--15. "SDR25DRVSTVAL,Driver Strength Select Value for SDR25" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" newline bitfld.long 0x00 10. "SDR25CLKGENVAL,Clock Generator Select Value for SDR25" "0,1" hexmask.long.word 0x00 0.--9. 1. "SDR25SDCLKFREQVAL,SD_CLK Frequency Select Value for SDR25" rgroup.long 0x6C++0x03 line.long 0x00 "PRSTVAL6,Preset Value for SDR104 and DDR50 Modes" bitfld.long 0x00 30.--31. "DDR50DRVSTVAL,Driver Strength Select Value for DDR50" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" bitfld.long 0x00 26. "DDR50CLKGENVAL,Clock Generator Select Value for DDR50" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "DDR50SDCLKFREQVAL,SD_CLK Frequency Select Value for DDR50" bitfld.long 0x00 14.--15. "SDR104DRVSTVAL,Driver Strength Select Value for SDR104" "0: Driver Type B is selected (Default),1: Driver Type A is selected,2: Driver Type C is selected,3: Driver Type D is selected" newline bitfld.long 0x00 10. "SDR104CLKGENVAL,Clock Generator Select Value for SDR104" "0,1" hexmask.long.word 0x00 0.--9. 1. "SDR104SDCLKFREQVAL,SD_CLK Frequency Select Value for SDR104" group.long 0x70++0x03 line.long 0x00 "BOOTTOCTRL,Boot Timeout Control Register" hexmask.long 0x00 0.--31. 1. "BOOTDATTOCNT,Boot Data Timeout Counter Value" rgroup.long 0xFC++0x03 line.long 0x00 "SLOTINTSTAT,Slot Interrupt Status Register" hexmask.long.byte 0x00 24.--31. 1. "VENDVERNUM,Vendor Version Number" hexmask.long.byte 0x00 16.--23. 1. "SPECVERNUM,Host Controller Compliant Spec Version Number" newline bitfld.long 0x00 0. "INTSLOT0,Interrupt Signal for Slot#0" "0,1" group.long 0x800++0x03 line.long 0x00 "CTRL,Core Control Signals" bitfld.long 0x00 16.--17. "TXDLYMUXSEL,TX Delay Mux Selection" "0,1,2,3" bitfld.long 0x00 8.--11. "OTAPDLYSEL,Selects One of 32 Taps on the SDIO_CLK Pin" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 7. "OTAPDLYEN,Selective Tap Delay Line Enable on SDIO_CLK Pin" "0,1" bitfld.long 0x00 6. "ITAPCHGWIN,Gating Signal for Tap Delay Change" "0,1" newline bitfld.long 0x00 1.--5. "ITAPDLYSEL,Selects One of 32 Taps on the Rxclk_in Line" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. "ITAPDLYEN,Selective Tap Delay Line Enable on Rxclk_in" "0,1" group.long 0x804++0x03 line.long 0x00 "CFG0,Core Configuration 0" bitfld.long 0x00 30. "C1P8VSUP,1P8V Support" "0,1" bitfld.long 0x00 29. "C3P0VSUP,3P0V Support" "0,1" newline bitfld.long 0x00 28. "C3P3VSUP,Core 3P3V Support" "0,1" bitfld.long 0x00 27. "CSUSPRESSUP,Suspend/Resume Support" "0,1" newline bitfld.long 0x00 26. "CSDMASUP,SDMA Mode Support" "0,1" bitfld.long 0x00 25. "CHSSUP,High Speed Mode Support" "0,1" newline bitfld.long 0x00 24. "CADMA2SUP,ADMA2 Mode Support" "0,1" bitfld.long 0x00 23. "C8BITSUP,8-bit Interface Support" "0,1" newline bitfld.long 0x00 21.--22. "MAXBLKLEN,MAX Block Length of Transfer" "0: 512 Bytes are Selected,1: 1024 Bytes are Selected,2: 2048 Bytes are Selected,?..." hexmask.long.byte 0x00 13.--20. 1. "BASECLKFREQ,Base Clock Frequency for SD_CLK" newline bitfld.long 0x00 12. "TOUTCLKUNIT,Timeout Clock Unit in kHz or MHz" "0,1" bitfld.long 0x00 6.--11. "TOUTCLKFREQ,Timeout Clock Frequency" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. "TUNINGCNT,Tuning Counter Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x808++0x03 line.long 0x00 "CFG1,Core Configuration 1" bitfld.long 0x00 18. "ASYNCWKUPEN,Asynchronous Wakeup Enable" "0,1" bitfld.long 0x00 16. "SPISUP,SPI Support" "0,1" newline bitfld.long 0x00 14.--15. "RETUNMODES,Retuning Modes" "0,1,2,3" bitfld.long 0x00 13. "TUNSDR50,Tuning for SDR50" "0,1" newline bitfld.long 0x00 9.--12. "RETUNTMRCTL,Retuning Timer Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8. "CDRVDSUP,Support Type D Driver" "0,1" newline bitfld.long 0x00 7. "CDRVCSUP,Support Type C Driver" "0,1" bitfld.long 0x00 6. "CDRVASUP,Support Type a Driver" "0,1" newline bitfld.long 0x00 5. "CDDR50SUP,Support DDR50" "0,1" bitfld.long 0x00 4. "CSDR104SUP,Support SDR104" "0,1" newline bitfld.long 0x00 3. "CSDR50SUP,Core Support SDR50" "0,1" bitfld.long 0x00 1.--2. "SLOTTYPE,Slot Type" "0: Removable SD Card Slot,1: Embedded SD Card Slot,2: Shared SD Card Slot,?..." newline bitfld.long 0x00 0. "ASYNCINTRSUP,Asynchronous Interrupt Support" "0,1" group.long 0x80C++0x03 line.long 0x00 "CFGPRESETVAL0,Core Configuration Preset Value 0" bitfld.long 0x00 27.--28. "DSPDRVST,Default Speed Drive Strength" "0,1,2,3" bitfld.long 0x00 26. "DSPCLKGENEN,Default Speed Clock Gen Enable" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "DSPSDCLKFREQ,Preset Value for Default Speed of SD_CLK" bitfld.long 0x00 11.--12. "INITDRVST,Initial Drive Strength" "0,1,2,3" newline bitfld.long 0x00 10. "INITCLKGENEN,Initial Clock Gen Enable" "0,1" hexmask.long.word 0x00 0.--9. 1. "INITSDCLKFREQ,Initial SD_CLK Frequency" group.long 0x810++0x03 line.long 0x00 "CFGPRESETVAL1,Core Configuration Preset Value 1" bitfld.long 0x00 27.--28. "SDR12DRVST,SDR12 Speed Drive Strength" "0,1,2,3" bitfld.long 0x00 26. "SDR12CLKGENEN,SDR12 Speed Clock Gen Enable" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "SDR12SDCLKFREQ,Preset Value for SDR12 Speed of SD_CLK" bitfld.long 0x00 11.--12. "HSPDRVST,High Speed SD Drive Strength" "0,1,2,3" newline bitfld.long 0x00 10. "HSPCLKGENEN,High Speed SD_CLK Gen Enable" "0,1" hexmask.long.word 0x00 0.--9. 1. "HSPSDCLKFREQ,High Speed SD_CLK Frequency" group.long 0x814++0x03 line.long 0x00 "CFGPRESETVAL2,Core Configuration Preset Value 2" bitfld.long 0x00 27.--28. "SDR50DRVST,SDR50 Speed Drive Strength" "0,1,2,3" bitfld.long 0x00 26. "SDR50CLKGENEN,SDR50 Speed Clock Gen Enable" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "SDR50SDCLKFREQ,Preset Value for SDR50 Speed of SD_CLK" bitfld.long 0x00 11.--12. "SDR25DRVST,SDR25 SD Drive Strength" "0,1,2,3" newline bitfld.long 0x00 10. "SDR25CLKGENEN,SDR25 SD_CLK Gen Enable" "0,1" hexmask.long.word 0x00 0.--9. 1. "SDR25SDCLKFREQ,SDR25 SD_CLK Frequency" group.long 0x818++0x03 line.long 0x00 "CFGPRESETVAL3,Core Configuration Preset Value 3" bitfld.long 0x00 27.--28. "DDR50DRVST,DDR50 Speed Drive Strength" "0,1,2,3" bitfld.long 0x00 26. "DDR50CLKGENEN,DDR50 Speed Clock Gen Enable" "0,1" newline hexmask.long.word 0x00 16.--25. 1. "DDR50SDCLKFREQ,Preset Value for DDR50 Speed of SD_CLK" bitfld.long 0x00 11.--12. "SDR104DRVST,SDR104 SD Drive Strength" "0,1,2,3" newline bitfld.long 0x00 10. "SDR104CLKGENEN,SDR104 SD_CLK Gen Enable" "0,1" hexmask.long.word 0x00 0.--9. 1. "SDR104SDCLKFREQ,SDR104 SD_CLK Frequency" group.long 0x81C++0x03 line.long 0x00 "ROUTELOC0,I/O LOCATION Register" bitfld.long 0x00 24.--29. "CLKLOC,I/O Location for CLK" "0: Location 0,1: Location 1,?..." bitfld.long 0x00 16.--21. "WPLOC,I/O Location for WP" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." newline bitfld.long 0x00 8.--13. "CDLOC,I/O Location for CD" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,?..." bitfld.long 0x00 0.--5. "DATLOC,I/O Location for D0-7 Pins" "0: Location 0,1: Location 1,?..." group.long 0x820++0x03 line.long 0x00 "ROUTELOC1,I/O LOCATION Register" bitfld.long 0x00 0.--5. "CMDLOC,I/O Location for CMD Pin" "0: Location 0,1: Location 1,?..." group.long 0x824++0x03 line.long 0x00 "ROUTEPEN,I/O LOCATION Enable Register" bitfld.long 0x00 9. "D7PEN,Data7 I/O Enable" "0,1" bitfld.long 0x00 8. "D6PEN,Dat6 Enable" "0,1" newline bitfld.long 0x00 7. "D5PEN,Dat5 Enable" "0,1" bitfld.long 0x00 6. "D4PEN,Dat4 I/O Enable" "0,1" newline bitfld.long 0x00 5. "D3PEN,Dat3 I/O Enable" "0,1" bitfld.long 0x00 4. "D2PEN,Dat2 I/O Enable" "0,1" newline bitfld.long 0x00 3. "D1PEN,Dat1 I/O Enable" "0,1" bitfld.long 0x00 2. "D0PEN,Dat0 I/O Enable" "0,1" newline bitfld.long 0x00 1. "CMDPEN,CMD I/O Enable" "0,1" bitfld.long 0x00 0. "CLKPEN,CLK I/O Enable" "0,1" tree.end endif tree "SMU" base ad:0x40020000 rgroup.long 0x0C++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 0. "PPUPRIV,PPU Privilege Interrupt Flag" "0,1" wgroup.long 0x10++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 0. "PPUPRIV,Set PPUPRIV Interrupt Flag" "0,1" wgroup.long 0x14++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 0. "PPUPRIV,Clear PPUPRIV Interrupt Flag" "0,1" group.long 0x18++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 0. "PPUPRIV,PPUPRIV Interrupt Enable" "0,1" group.long 0x40++0x03 line.long 0x00 "PPUCTRL,PPU Control Register" bitfld.long 0x00 0. "ENABLE," "0,1" sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B330F512")||cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0x50++0x03 line.long 0x00 "PPUPATD0,PPU Privilege Access Type Descriptor 0" bitfld.long 0x00 28. "LEUART1,Low Energy UART 1 access control bit" "0,1" bitfld.long 0x00 27. "LEUART0,Low Energy UART 0 access control bit" "0,1" newline bitfld.long 0x00 26. "LETIMER1,Low Energy Timer 1 access control bit" "0,1" bitfld.long 0x00 25. "LETIMER0,Low Energy Timer 0 access control bit" "0,1" newline bitfld.long 0x00 24. "LESENSE,Low Energy Sensor Interface access control bit" "0,1" bitfld.long 0x00 23. "LDMA,Linked Direct Memory Access Controller access control bit" "0,1" newline bitfld.long 0x00 22. "LCD,Liquid Crystal Display Controller access control bit" "0,1" bitfld.long 0x00 21. "MSC,Memory System Controller access control bit" "0,1" newline bitfld.long 0x00 20. "IDAC0,Current Digital to Analog Converter 0 access control bit" "0,1" bitfld.long 0x00 19. "I2C1,I2C 1 access control bit" "0,1" newline bitfld.long 0x00 18. "I2C0,I2C 0 access control bit" "0,1" bitfld.long 0x00 17. "GPIO,General purpose Input/Output access control bit" "0,1" newline bitfld.long 0x00 16. "GPCRC,General Purpose CRC access control bit" "0,1" bitfld.long 0x00 15. "FPUEH,FPU Exception Handler access control bit" "0,1" newline bitfld.long 0x00 14. "EMU,Energy Management Unit access control bit" "0,1" bitfld.long 0x00 13. "EBI,External Bus Interface access control bit" "0,1" newline bitfld.long 0x00 12. "PRS,Peripheral Reflex System access control bit" "0,1" bitfld.long 0x00 11. "VDAC0,Digital to Analog Converter 0 access control bit" "0,1" newline bitfld.long 0x00 10. "CSEN,Capacitive touch sense module access control bit" "0,1" bitfld.long 0x00 9. "CRYPTO0,Advanced Encryption Standard Accelerator access control bit" "0,1" newline bitfld.long 0x00 8. "CRYOTIMER,CRYOTIMER access control bit" "0,1" bitfld.long 0x00 7. "CMU,Clock Management Unit access control bit" "0,1" newline bitfld.long 0x00 6. "CAN1,CAN 1 access control bit" "0,1" bitfld.long 0x00 5. "CAN0,CAN 0 access control bit" "0,1" newline bitfld.long 0x00 4. "ADC1,Analog to Digital Converter 0 access control bit" "0,1" bitfld.long 0x00 3. "ADC0,Analog to Digital Converter 0 access control bit" "0,1" newline bitfld.long 0x00 2. "ACMP2,Analog Comparator 2 access control bit" "0,1" bitfld.long 0x00 1. "ACMP1,Analog Comparator 1 access control bit" "0,1" newline bitfld.long 0x00 0. "ACMP0,Analog Comparator 0 access control bit" "0,1" endif sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512") group.long 0x50++0x03 line.long 0x00 "PPUPATD0,PPU Privilege Access Type Descriptor 0" bitfld.long 0x00 28. "LEUART1,Low Energy UART 1 access control bit" "0,1" bitfld.long 0x00 27. "LEUART0,Low Energy UART 0 access control bit" "0,1" newline bitfld.long 0x00 26. "LETIMER1,Low Energy Timer 1 access control bit" "0,1" bitfld.long 0x00 25. "LETIMER0,Low Energy Timer 0 access control bit" "0,1" newline bitfld.long 0x00 24. "LESENSE,Low Energy Sensor Interface access control bit" "0,1" bitfld.long 0x00 23. "LDMA,Linked Direct Memory Access Controller access control bit" "0,1" newline bitfld.long 0x00 21. "MSC,Memory System Controller access control bit" "0,1" bitfld.long 0x00 20. "IDAC0,Current Digital to Analog Converter 0 access control bit" "0,1" newline bitfld.long 0x00 19. "I2C1,I2C 1 access control bit" "0,1" bitfld.long 0x00 18. "I2C0,I2C 0 access control bit" "0,1" newline bitfld.long 0x00 17. "GPIO,General purpose Input/Output access control bit" "0,1" bitfld.long 0x00 16. "GPCRC,General Purpose CRC access control bit" "0,1" newline bitfld.long 0x00 15. "FPUEH,FPU Exception Handler access control bit" "0,1" bitfld.long 0x00 14. "EMU,Energy Management Unit access control bit" "0,1" newline bitfld.long 0x00 13. "EBI,External Bus Interface access control bit" "0,1" bitfld.long 0x00 12. "PRS,Peripheral Reflex System access control bit" "0,1" newline bitfld.long 0x00 11. "VDAC0,Digital to Analog Converter 0 access control bit" "0,1" bitfld.long 0x00 10. "CSEN,Capacitive touch sense module access control bit" "0,1" newline bitfld.long 0x00 9. "CRYPTO0,Advanced Encryption Standard Accelerator access control bit" "0,1" bitfld.long 0x00 8. "CRYOTIMER,CRYOTIMER access control bit" "0,1" newline bitfld.long 0x00 7. "CMU,Clock Management Unit access control bit" "0,1" bitfld.long 0x00 6. "CAN1,CAN 1 access control bit" "0,1" newline bitfld.long 0x00 5. "CAN0,CAN 0 access control bit" "0,1" bitfld.long 0x00 4. "ADC1,Analog to Digital Converter 0 access control bit" "0,1" newline bitfld.long 0x00 3. "ADC0,Analog to Digital Converter 0 access control bit" "0,1" bitfld.long 0x00 2. "ACMP2,Analog Comparator 2 access control bit" "0,1" newline bitfld.long 0x00 1. "ACMP1,Analog Comparator 1 access control bit" "0,1" bitfld.long 0x00 0. "ACMP0,Analog Comparator 0 access control bit" "0,1" endif sif cpuis("EFM32GG12B110F1024")||cpuis("EFM32GG12B130F512")||cpuis("EFM32GG12B310F1024")||cpuis("EFM32GG12B510F1024")||cpuis("EFM32GG12B530F512") group.long 0x54++0x03 line.long 0x00 "PPUPATD1,PPU Privilege Access Type Descriptor 1" bitfld.long 0x00 26. "WTIMER1,Wide Timer 0 access control bit" "0,1" bitfld.long 0x00 25. "WTIMER0,Wide Timer 0 access control bit" "0,1" newline bitfld.long 0x00 24. "WDOG1,Watchdog access control bit" "0,1" bitfld.long 0x00 23. "WDOG0,Watchdog access control bit" "0,1" newline bitfld.long 0x00 21. "USART4,Universal Synchronous/Asynchronous Receiver/Transmitter 4 access control bit" "0,1" bitfld.long 0x00 20. "USART3,Universal Synchronous/Asynchronous Receiver/Transmitter 3 access control bit" "0,1" newline bitfld.long 0x00 19. "USART2,Universal Synchronous/Asynchronous Receiver/Transmitter 2 access control bit" "0,1" bitfld.long 0x00 18. "USART1,Universal Synchronous/Asynchronous Receiver/Transmitter 1 access control bit" "0,1" newline bitfld.long 0x00 17. "USART0,Universal Synchronous/Asynchronous Receiver/Transmitter 0 access control bit" "0,1" bitfld.long 0x00 16. "UART1,Universal Asynchronous Receiver/Transmitter 1 access control bit" "0,1" newline bitfld.long 0x00 15. "UART0,Universal Asynchronous Receiver/Transmitter 0 access control bit" "0,1" bitfld.long 0x00 14. "TRNG0,True Random Number Generator 0 access control bit" "0,1" newline bitfld.long 0x00 13. "TIMER3,Timer 3 access control bit" "0,1" bitfld.long 0x00 12. "TIMER2,Timer 2 access control bit" "0,1" newline bitfld.long 0x00 11. "TIMER1,Timer 1 access control bit" "0,1" bitfld.long 0x00 10. "TIMER0,Timer 0 access control bit" "0,1" newline bitfld.long 0x00 9. "SMU,Security Management Unit access control bit" "0,1" bitfld.long 0x00 7. "RTCC,Real-Time Counter and Calendar access control bit" "0,1" newline bitfld.long 0x00 6. "RTC,Real-Time Counter access control bit" "0,1" bitfld.long 0x00 5. "RMU,Reset Management Unit access control bit" "0,1" newline bitfld.long 0x00 3. "PDM,PDM Interface access control bit" "0,1" bitfld.long 0x00 2. "PCNT2,Pulse Counter 2 access control bit" "0,1" newline bitfld.long 0x00 1. "PCNT1,Pulse Counter 1 access control bit" "0,1" bitfld.long 0x00 0. "PCNT0,Pulse Counter 0 access control bit" "0,1" endif sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") group.long 0x54++0x03 line.long 0x00 "PPUPATD1,PPU Privilege Access Type Descriptor 1" bitfld.long 0x00 26. "WTIMER1,Wide Timer 0 access control bit" "0,1" bitfld.long 0x00 25. "WTIMER0,Wide Timer 0 access control bit" "0,1" newline bitfld.long 0x00 24. "WDOG1,Watchdog access control bit" "0,1" bitfld.long 0x00 23. "WDOG0,Watchdog access control bit" "0,1" newline bitfld.long 0x00 22. "USB,Universal Serial Bus Interface access control bit" "0,1" bitfld.long 0x00 21. "USART4,Universal Synchronous/Asynchronous Receiver/Transmitter 4 access control bit" "0,1" newline bitfld.long 0x00 20. "USART3,Universal Synchronous/Asynchronous Receiver/Transmitter 3 access control bit" "0,1" bitfld.long 0x00 19. "USART2,Universal Synchronous/Asynchronous Receiver/Transmitter 2 access control bit" "0,1" newline bitfld.long 0x00 18. "USART1,Universal Synchronous/Asynchronous Receiver/Transmitter 1 access control bit" "0,1" bitfld.long 0x00 17. "USART0,Universal Synchronous/Asynchronous Receiver/Transmitter 0 access control bit" "0,1" newline bitfld.long 0x00 16. "UART1,Universal Asynchronous Receiver/Transmitter 1 access control bit" "0,1" bitfld.long 0x00 15. "UART0,Universal Asynchronous Receiver/Transmitter 0 access control bit" "0,1" newline bitfld.long 0x00 14. "TRNG0,True Random Number Generator 0 access control bit" "0,1" bitfld.long 0x00 13. "TIMER3,Timer 3 access control bit" "0,1" newline bitfld.long 0x00 12. "TIMER2,Timer 2 access control bit" "0,1" bitfld.long 0x00 11. "TIMER1,Timer 1 access control bit" "0,1" newline bitfld.long 0x00 10. "TIMER0,Timer 0 access control bit" "0,1" bitfld.long 0x00 9. "SMU,Security Management Unit access control bit" "0,1" newline bitfld.long 0x00 8. "SDIO,SDIO Controller access control bit" "0,1" bitfld.long 0x00 7. "RTCC,Real-Time Counter and Calendar access control bit" "0,1" newline bitfld.long 0x00 6. "RTC,Real-Time Counter access control bit" "0,1" bitfld.long 0x00 5. "RMU,Reset Management Unit access control bit" "0,1" newline bitfld.long 0x00 4. "QSPI0,Quad-SPI access control bit" "0,1" bitfld.long 0x00 3. "PDM,PDM Interface access control bit" "0,1" newline bitfld.long 0x00 2. "PCNT2,Pulse Counter 2 access control bit" "0,1" bitfld.long 0x00 1. "PCNT1,Pulse Counter 1 access control bit" "0,1" newline bitfld.long 0x00 0. "PCNT0,Pulse Counter 0 access control bit" "0,1" endif group.long 0x58++0x03 line.long 0x00 "PPUPATD2,PPU Privilege Access Type Descriptor 2" rgroup.long 0x90++0x03 line.long 0x00 "PPUFS,PPU Fault Status" hexmask.long.byte 0x00 0.--6. 1. "PERIPHID," tree.end tree "TIMER (Timer/Counter)" repeat 4. (list 0. 1. 2. 3.) (list ad:0x40018000 ad:0x40018400 ad:0x40018800 ad:0x40018C00) tree "TIMER$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 29. "RSSCOIST,Reload-Start Sets Compare Output Initial State" "0,1" bitfld.long 0x00 28. "ATI,Always Track Inputs" "0,1" newline bitfld.long 0x00 24.--27. "PRESC,Prescaler Setting" "0: The HFPERCLK is undivided,1: The HFPERCLK is divided by 2,2: The HFPERCLK is divided by 4,3: The HFPERCLK is divided by 8,4: The HFPERCLK is divided by 16,5: The HFPERCLK is divided by 32,6: The HFPERCLK is divided by 64,7: The HFPERCLK is divided by 128,8: The HFPERCLK is divided by 256,9: The HFPERCLK is divided by 512,10: The HFPERCLK is divided by 1024,?..." bitfld.long 0x00 16.--17. "CLKSEL,Clock Source Select" "0: Prescaled HFPERCLK,1: Compare/Capture Channel 1 Input,2: Timer is clocked by underflow(down-count) or..,?..." newline bitfld.long 0x00 14. "DISSYNCOUT,Disable Timer From Start/Stop/Reload Other Synchronized Timers" "0,1" bitfld.long 0x00 13. "X2CNT,2x Count Mode" "0,1" newline bitfld.long 0x00 10.--11. "FALLA,Timer Falling Input Edge Action" "0: No action,1: Start counter without reload,2: Stop counter without reload,3: Reload and start counter" bitfld.long 0x00 8.--9. "RISEA,Timer Rising Input Edge Action" "0: No action,1: Start counter without reload,2: Stop counter without reload,3: Reload and start counter" newline bitfld.long 0x00 7. "DMACLRACT,DMA Request Clear on Active" "0,1" bitfld.long 0x00 6. "DEBUGRUN,Debug Mode Run Enable" "0,1" newline bitfld.long 0x00 5. "QDM,Quadrature Decoder Mode Selection" "0,1" bitfld.long 0x00 4. "OSMEN,One-shot Mode Enable" "0,1" newline bitfld.long 0x00 3. "SYNC,Timer Start/Stop/Reload Synchronization" "0,1" bitfld.long 0x00 0.--1. "MODE,Timer Mode" "0: Up-count mode,1: Down-count mode,2: Up/down-count mode,3: Quadrature decoder mode" wgroup.long 0x04++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 1. "STOP,Stop Timer" "0,1" bitfld.long 0x00 0. "START,Start Timer" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 27. "CCPOL3,CC3 Polarity" "0,1" bitfld.long 0x00 26. "CCPOL2,CC2 Polarity" "0,1" newline bitfld.long 0x00 25. "CCPOL1,CC1 Polarity" "0,1" bitfld.long 0x00 24. "CCPOL0,CC0 Polarity" "0,1" newline bitfld.long 0x00 19. "ICV3,CC3 Input Capture Valid" "0,1" bitfld.long 0x00 18. "ICV2,CC2 Input Capture Valid" "0,1" newline bitfld.long 0x00 17. "ICV1,CC1 Input Capture Valid" "0,1" bitfld.long 0x00 16. "ICV0,CC0 Input Capture Valid" "0,1" newline bitfld.long 0x00 11. "CCVBV3,CC3 CCVB Valid" "0,1" bitfld.long 0x00 10. "CCVBV2,CC2 CCVB Valid" "0,1" newline bitfld.long 0x00 9. "CCVBV1,CC1 CCVB Valid" "0,1" bitfld.long 0x00 8. "CCVBV0,CC0 CCVB Valid" "0,1" newline bitfld.long 0x00 2. "TOPBV,TOPB Valid" "0,1" bitfld.long 0x00 1. "DIR,Direction" "0,1" newline bitfld.long 0x00 0. "RUNNING,Running" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 11. "ICBOF3,CC Channel 3 Input Capture Buffer Overflow Interrupt Flag" "0,1" bitfld.long 0x00 10. "ICBOF2,CC Channel 2 Input Capture Buffer Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "ICBOF1,CC Channel 1 Input Capture Buffer Overflow Interrupt Flag" "0,1" bitfld.long 0x00 8. "ICBOF0,CC Channel 0 Input Capture Buffer Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "CC3,CC Channel 3 Interrupt Flag" "0,1" bitfld.long 0x00 6. "CC2,CC Channel 2 Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CC1,CC Channel 1 Interrupt Flag" "0,1" bitfld.long 0x00 4. "CC0,CC Channel 0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "DIRCHG,Direction Change Detect Interrupt Flag" "0,1" bitfld.long 0x00 1. "UF,Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Overflow Interrupt Flag" "0,1" wgroup.long 0x10++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 11. "ICBOF3,Set ICBOF3 Interrupt Flag" "0,1" bitfld.long 0x00 10. "ICBOF2,Set ICBOF2 Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "ICBOF1,Set ICBOF1 Interrupt Flag" "0,1" bitfld.long 0x00 8. "ICBOF0,Set ICBOF0 Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "CC3,Set CC3 Interrupt Flag" "0,1" bitfld.long 0x00 6. "CC2,Set CC2 Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CC1,Set CC1 Interrupt Flag" "0,1" bitfld.long 0x00 4. "CC0,Set CC0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "DIRCHG,Set DIRCHG Interrupt Flag" "0,1" bitfld.long 0x00 1. "UF,Set UF Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Set OF Interrupt Flag" "0,1" wgroup.long 0x14++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 11. "ICBOF3,Clear ICBOF3 Interrupt Flag" "0,1" bitfld.long 0x00 10. "ICBOF2,Clear ICBOF2 Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "ICBOF1,Clear ICBOF1 Interrupt Flag" "0,1" bitfld.long 0x00 8. "ICBOF0,Clear ICBOF0 Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "CC3,Clear CC3 Interrupt Flag" "0,1" bitfld.long 0x00 6. "CC2,Clear CC2 Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CC1,Clear CC1 Interrupt Flag" "0,1" bitfld.long 0x00 4. "CC0,Clear CC0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "DIRCHG,Clear DIRCHG Interrupt Flag" "0,1" bitfld.long 0x00 1. "UF,Clear UF Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Clear OF Interrupt Flag" "0,1" group.long 0x18++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 11. "ICBOF3,ICBOF3 Interrupt Enable" "0,1" bitfld.long 0x00 10. "ICBOF2,ICBOF2 Interrupt Enable" "0,1" newline bitfld.long 0x00 9. "ICBOF1,ICBOF1 Interrupt Enable" "0,1" bitfld.long 0x00 8. "ICBOF0,ICBOF0 Interrupt Enable" "0,1" newline bitfld.long 0x00 7. "CC3,CC3 Interrupt Enable" "0,1" bitfld.long 0x00 6. "CC2,CC2 Interrupt Enable" "0,1" newline bitfld.long 0x00 5. "CC1,CC1 Interrupt Enable" "0,1" bitfld.long 0x00 4. "CC0,CC0 Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "DIRCHG,DIRCHG Interrupt Enable" "0,1" bitfld.long 0x00 1. "UF,UF Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "OF,OF Interrupt Enable" "0,1" group.long 0x1C++0x03 line.long 0x00 "TOP,Counter Top Value Register" hexmask.long 0x00 0.--31. 1. "TOP,Counter Top Value" group.long 0x20++0x03 line.long 0x00 "TOPB,Counter Top Value Buffer Register" hexmask.long 0x00 0.--31. 1. "TOPB,Counter Top Value Buffer" group.long 0x24++0x03 line.long 0x00 "CNT,Counter Value Register" hexmask.long 0x00 0.--31. 1. "CNT,Counter Value" group.long 0x2C++0x03 line.long 0x00 "LOCK,TIMER Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "TIMERLOCKKEY,Timer Lock Key" group.long 0x30++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 10. "CDTI2PEN,CC Channel 2 Complementary Dead-Time Insertion Pin Enable" "0,1" bitfld.long 0x00 9. "CDTI1PEN,CC Channel 1 Complementary Dead-Time Insertion Pin Enable" "0,1" newline bitfld.long 0x00 8. "CDTI0PEN,CC Channel 0 Complementary Dead-Time Insertion Pin Enable" "0,1" bitfld.long 0x00 3. "CC3PEN,CC Channel 3 Pin Enable" "0,1" newline bitfld.long 0x00 2. "CC2PEN,CC Channel 2 Pin Enable" "0,1" bitfld.long 0x00 1. "CC1PEN,CC Channel 1 Pin Enable" "0,1" newline bitfld.long 0x00 0. "CC0PEN,CC Channel 0 Pin Enable" "0,1" group.long 0x34++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 24.--29. "CC3LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." bitfld.long 0x00 16.--21. "CC2LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." newline bitfld.long 0x00 8.--13. "CC1LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." bitfld.long 0x00 0.--5. "CC0LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." group.long 0x3C++0x03 line.long 0x00 "ROUTELOC2,I/O Routing Location Register" bitfld.long 0x00 16.--21. "CDTI2LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." bitfld.long 0x00 8.--13. "CDTI1LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." newline bitfld.long 0x00 0.--5. "CDTI0LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." group.long 0x60++0x03 line.long 0x00 "CC0_CTRL,CC Channel Control Register" bitfld.long 0x00 30. "FILT,Digital Filter" "0,1" bitfld.long 0x00 29. "INSEL,Input Selection" "0,1" newline bitfld.long 0x00 28. "PRSCONF,PRS Configuration" "0,1" bitfld.long 0x00 26.--27. "ICEVCTRL,Input Capture Event Control" "0: PRS output pulse and interrupt flag set on..,1: PRS output pulse and interrupt flag set on..,2: PRS output pulse and interrupt flag set on..,3: PRS output pulse and interrupt flag set on.." newline bitfld.long 0x00 24.--25. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 16.--19. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 12.--13. "CUFOA,Counter Underflow Output Action" "0: No action on counter underflow,1: Toggle output on counter underflow,2: Clear output on counter underflow,3: Set output on counter underflow" bitfld.long 0x00 10.--11. "COFOA,Counter Overflow Output Action" "0: No action on counter overflow,1: Toggle output on counter overflow,2: Clear output on counter overflow,3: Set output on counter overflow" newline bitfld.long 0x00 8.--9. "CMOA,Compare Match Output Action" "0: No action on compare match,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" bitfld.long 0x00 4. "COIST,Compare Output Initial State" "0,1" newline bitfld.long 0x00 2. "OUTINV,Output Invert" "0,1" bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,3: Pulse-Width Modulation" group.long 0x64++0x03 line.long 0x00 "CC0_CCV,CC Channel Value Register" hexmask.long 0x00 0.--31. 1. "CCV,CC Channel Value" rgroup.long 0x68++0x03 line.long 0x00 "CC0_CCVP,CC Channel Value Peek Register" hexmask.long 0x00 0.--31. 1. "CCVP,CC Channel Value Peek" group.long 0x6C++0x03 line.long 0x00 "CC0_CCVB,CC Channel Buffer Register" hexmask.long 0x00 0.--31. 1. "CCVB,CC Channel Value Buffer" group.long 0x70++0x03 line.long 0x00 "CC1_CTRL,CC Channel Control Register" bitfld.long 0x00 30. "FILT,Digital Filter" "0,1" bitfld.long 0x00 29. "INSEL,Input Selection" "0,1" newline bitfld.long 0x00 28. "PRSCONF,PRS Configuration" "0,1" bitfld.long 0x00 26.--27. "ICEVCTRL,Input Capture Event Control" "0: PRS output pulse and interrupt flag set on..,1: PRS output pulse and interrupt flag set on..,2: PRS output pulse and interrupt flag set on..,3: PRS output pulse and interrupt flag set on.." newline bitfld.long 0x00 24.--25. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 16.--19. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 12.--13. "CUFOA,Counter Underflow Output Action" "0: No action on counter underflow,1: Toggle output on counter underflow,2: Clear output on counter underflow,3: Set output on counter underflow" bitfld.long 0x00 10.--11. "COFOA,Counter Overflow Output Action" "0: No action on counter overflow,1: Toggle output on counter overflow,2: Clear output on counter overflow,3: Set output on counter overflow" newline bitfld.long 0x00 8.--9. "CMOA,Compare Match Output Action" "0: No action on compare match,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" bitfld.long 0x00 4. "COIST,Compare Output Initial State" "0,1" newline bitfld.long 0x00 2. "OUTINV,Output Invert" "0,1" bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,3: Pulse-Width Modulation" group.long 0x74++0x03 line.long 0x00 "CC1_CCV,CC Channel Value Register" hexmask.long 0x00 0.--31. 1. "CCV,CC Channel Value" rgroup.long 0x78++0x03 line.long 0x00 "CC1_CCVP,CC Channel Value Peek Register" hexmask.long 0x00 0.--31. 1. "CCVP,CC Channel Value Peek" group.long 0x7C++0x03 line.long 0x00 "CC1_CCVB,CC Channel Buffer Register" hexmask.long 0x00 0.--31. 1. "CCVB,CC Channel Value Buffer" group.long 0x80++0x03 line.long 0x00 "CC2_CTRL,CC Channel Control Register" bitfld.long 0x00 30. "FILT,Digital Filter" "0,1" bitfld.long 0x00 29. "INSEL,Input Selection" "0,1" newline bitfld.long 0x00 28. "PRSCONF,PRS Configuration" "0,1" bitfld.long 0x00 26.--27. "ICEVCTRL,Input Capture Event Control" "0: PRS output pulse and interrupt flag set on..,1: PRS output pulse and interrupt flag set on..,2: PRS output pulse and interrupt flag set on..,3: PRS output pulse and interrupt flag set on.." newline bitfld.long 0x00 24.--25. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 16.--19. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 12.--13. "CUFOA,Counter Underflow Output Action" "0: No action on counter underflow,1: Toggle output on counter underflow,2: Clear output on counter underflow,3: Set output on counter underflow" bitfld.long 0x00 10.--11. "COFOA,Counter Overflow Output Action" "0: No action on counter overflow,1: Toggle output on counter overflow,2: Clear output on counter overflow,3: Set output on counter overflow" newline bitfld.long 0x00 8.--9. "CMOA,Compare Match Output Action" "0: No action on compare match,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" bitfld.long 0x00 4. "COIST,Compare Output Initial State" "0,1" newline bitfld.long 0x00 2. "OUTINV,Output Invert" "0,1" bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,3: Pulse-Width Modulation" group.long 0x84++0x03 line.long 0x00 "CC2_CCV,CC Channel Value Register" hexmask.long 0x00 0.--31. 1. "CCV,CC Channel Value" rgroup.long 0x88++0x03 line.long 0x00 "CC2_CCVP,CC Channel Value Peek Register" hexmask.long 0x00 0.--31. 1. "CCVP,CC Channel Value Peek" group.long 0x8C++0x03 line.long 0x00 "CC2_CCVB,CC Channel Buffer Register" hexmask.long 0x00 0.--31. 1. "CCVB,CC Channel Value Buffer" group.long 0x90++0x03 line.long 0x00 "CC3_CTRL,CC Channel Control Register" bitfld.long 0x00 30. "FILT,Digital Filter" "0,1" bitfld.long 0x00 29. "INSEL,Input Selection" "0,1" newline bitfld.long 0x00 28. "PRSCONF,PRS Configuration" "0,1" bitfld.long 0x00 26.--27. "ICEVCTRL,Input Capture Event Control" "0: PRS output pulse and interrupt flag set on..,1: PRS output pulse and interrupt flag set on..,2: PRS output pulse and interrupt flag set on..,3: PRS output pulse and interrupt flag set on.." newline bitfld.long 0x00 24.--25. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 16.--19. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 12.--13. "CUFOA,Counter Underflow Output Action" "0: No action on counter underflow,1: Toggle output on counter underflow,2: Clear output on counter underflow,3: Set output on counter underflow" bitfld.long 0x00 10.--11. "COFOA,Counter Overflow Output Action" "0: No action on counter overflow,1: Toggle output on counter overflow,2: Clear output on counter overflow,3: Set output on counter overflow" newline bitfld.long 0x00 8.--9. "CMOA,Compare Match Output Action" "0: No action on compare match,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" bitfld.long 0x00 4. "COIST,Compare Output Initial State" "0,1" newline bitfld.long 0x00 2. "OUTINV,Output Invert" "0,1" bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,3: Pulse-Width Modulation" group.long 0x94++0x03 line.long 0x00 "CC3_CCV,CC Channel Value Register" hexmask.long 0x00 0.--31. 1. "CCV,CC Channel Value" rgroup.long 0x98++0x03 line.long 0x00 "CC3_CCVP,CC Channel Value Peek Register" hexmask.long 0x00 0.--31. 1. "CCVP,CC Channel Value Peek" group.long 0x9C++0x03 line.long 0x00 "CC3_CCVB,CC Channel Buffer Register" hexmask.long 0x00 0.--31. 1. "CCVB,CC Channel Value Buffer" group.long 0xA0++0x03 line.long 0x00 "DTCTRL,DTI Control Register" bitfld.long 0x00 24. "DTPRSEN,DTI PRS Source Enable" "0,1" bitfld.long 0x00 10. "DTFATS,DTI Fault Action on Timer Stop" "0,1" newline bitfld.long 0x00 9. "DTAR,DTI Always Run" "0,1" bitfld.long 0x00 4.--7. "DTPRSSEL,DTI PRS Source Channel Select" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 3. "DTCINV,DTI Complementary Output Invert" "0,1" bitfld.long 0x00 2. "DTIPOL,DTI Inactive Polarity" "0,1" newline bitfld.long 0x00 1. "DTDAS,DTI Automatic Start-up Functionality" "0,1" bitfld.long 0x00 0. "DTEN,DTI Enable" "0,1" group.long 0xA4++0x03 line.long 0x00 "DTTIME,DTI Time Control Register" bitfld.long 0x00 16.--21. "DTFALLT,DTI Fall-time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8.--13. "DTRISET,DTI Rise-time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--3. "DTPRESC,DTI Prescaler Setting" "0: The HFPERCLK is undivided,1: The HFPERCLK is divided by 2,2: The HFPERCLK is divided by 4,3: The HFPERCLK is divided by 8,4: The HFPERCLK is divided by 16,5: The HFPERCLK is divided by 32,6: The HFPERCLK is divided by 64,7: The HFPERCLK is divided by 128,8: The HFPERCLK is divided by 256,9: The HFPERCLK is divided by 512,10: The HFPERCLK is divided by 1024,?..." group.long 0xA8++0x03 line.long 0x00 "DTFC,DTI Fault Configuration Register" bitfld.long 0x00 27. "DTLOCKUPFEN,DTI Lockup Fault Enable" "0,1" bitfld.long 0x00 26. "DTDBGFEN,DTI Debugger Fault Enable" "0,1" newline bitfld.long 0x00 25. "DTPRS1FEN,DTI PRS 1 Fault Enable" "0,1" bitfld.long 0x00 24. "DTPRS0FEN,DTI PRS 0 Fault Enable" "0,1" newline bitfld.long 0x00 16.--17. "DTFA,DTI Fault Action" "0: No action on fault,1: Set outputs inactive,2: Clear outputs,3: Tristate outputs" bitfld.long 0x00 8.--11. "DTPRS1FSEL,DTI PRS Fault Source 1 Select" "0: PRS Channel 0 selected as fault source 1,1: PRS Channel 1 selected as fault source 1,2: PRS Channel 2 selected as fault source 1,3: PRS Channel 3 selected as fault source 1,4: PRS Channel 4 selected as fault source 1,5: PRS Channel 5 selected as fault source 1,6: PRS Channel 6 selected as fault source 1,7: PRS Channel 7 selected as fault source 1,8: PRS Channel 8 selected as fault source 1,9: PRS Channel 9 selected as fault source 1,10: PRS Channel 10 selected as fault source 1,11: PRS Channel 11 selected as fault source 1,12: PRS Channel 12 selected as fault source 1,13: PRS Channel 13 selected as fault source 1,14: PRS Channel 14 selected as fault source 1,15: PRS Channel 15 selected as fault source 1" newline bitfld.long 0x00 0.--3. "DTPRS0FSEL,DTI PRS Fault Source 0 Select" "0: PRS Channel 0 selected as fault source 0,1: PRS Channel 1 selected as fault source 1,2: PRS Channel 2 selected as fault source 2,3: PRS Channel 3 selected as fault source 3,4: PRS Channel 4 selected as fault source 4,5: PRS Channel 5 selected as fault source 5,6: PRS Channel 6 selected as fault source 6,7: PRS Channel 7 selected as fault source 7,8: PRS Channel 8 selected as fault source 8,9: PRS Channel 9 selected as fault source 9,10: PRS Channel 10 selected as fault source 10,11: PRS Channel 11 selected as fault source 11,12: PRS Channel 12 selected as fault source 12,13: PRS Channel 13 selected as fault source 13,14: PRS Channel 14 selected as fault source 14,15: PRS Channel 15 selected as fault source 15" group.long 0xAC++0x03 line.long 0x00 "DTOGEN,DTI Output Generation Enable Register" bitfld.long 0x00 5. "DTOGCDTI2EN,DTI CDTI2 Output Generation Enable" "0,1" bitfld.long 0x00 4. "DTOGCDTI1EN,DTI CDTI1 Output Generation Enable" "0,1" newline bitfld.long 0x00 3. "DTOGCDTI0EN,DTI CDTI0 Output Generation Enable" "0,1" bitfld.long 0x00 2. "DTOGCC2EN,DTI CC2 Output Generation Enable" "0,1" newline bitfld.long 0x00 1. "DTOGCC1EN,DTI CC1 Output Generation Enable" "0,1" bitfld.long 0x00 0. "DTOGCC0EN,DTI CC0 Output Generation Enable" "0,1" rgroup.long 0xB0++0x03 line.long 0x00 "DTFAULT,DTI Fault Register" bitfld.long 0x00 3. "DTLOCKUPF,DTI Lockup Fault" "0,1" bitfld.long 0x00 2. "DTDBGF,DTI Debugger Fault" "0,1" newline bitfld.long 0x00 1. "DTPRS1F,DTI PRS 1 Fault" "0,1" bitfld.long 0x00 0. "DTPRS0F,DTI PRS 0 Fault" "0,1" wgroup.long 0xB4++0x03 line.long 0x00 "DTFAULTC,DTI Fault Clear Register" bitfld.long 0x00 3. "TLOCKUPFC,DTI Lockup Fault Clear" "0,1" bitfld.long 0x00 2. "DTDBGFC,DTI Debugger Fault Clear" "0,1" newline bitfld.long 0x00 1. "DTPRS1FC,DTI PRS1 Fault Clear" "0,1" bitfld.long 0x00 0. "DTPRS0FC,DTI PRS0 Fault Clear" "0,1" group.long 0xB8++0x03 line.long 0x00 "DTLOCK,DTI Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,DTI Lock Key" tree.end repeat.end tree.end tree "TRNG0" base ad:0x4001D000 group.long 0x00++0x03 line.long 0x00 "CONTROL,Main Control Register" bitfld.long 0x00 13. "BYPAIS31,AIS31 Start-up Test Bypass" "0,1" bitfld.long 0x00 12. "BYPNIST,NIST Start-up Test Bypass" "0,1" newline bitfld.long 0x00 11. "FORCERUN,Oscillator Force Run" "0,1" bitfld.long 0x00 10. "ALMIEN,Interrupt enable for AIS31 noise alarm" "0,1" newline bitfld.long 0x00 9. "PREIEN,Interrupt enable for AIS31 preliminary noise alarm" "0,1" bitfld.long 0x00 8. "SOFTRESET,Software Reset" "0,1" newline bitfld.long 0x00 7. "FULLIEN,Interrupt Enable for FIFO Full" "0,1" bitfld.long 0x00 6. "APT4096IEN,Interrupt Enable for Adaptive Proportion Test Failure (4096-sample Window)" "0,1" newline bitfld.long 0x00 5. "APT64IEN,Interrupt Enable for Adaptive Proportion Test Failure (64-sample Window)" "0,1" bitfld.long 0x00 4. "REPCOUNTIEN,Interrupt Enable for Repetition Count Test Failure" "0,1" newline bitfld.long 0x00 3. "CONDBYPASS,Conditioning Bypass" "0,1" bitfld.long 0x00 2. "TESTEN,Test Enable" "0,1" newline bitfld.long 0x00 0. "ENABLE,TRNG Module Enable" "0,1" rgroup.long 0x04++0x03 line.long 0x00 "FIFOLEVEL,FIFO Level Register" hexmask.long 0x00 0.--31. 1. "VALUE,FIFO Level" rgroup.long 0x0C++0x03 line.long 0x00 "FIFODEPTH,FIFO Depth Register" hexmask.long 0x00 0.--31. 1. "VALUE,FIFO Depth" group.long 0x10++0x03 line.long 0x00 "KEY0,Key Register 0" hexmask.long 0x00 0.--31. 1. "VALUE,Key 0" group.long 0x14++0x03 line.long 0x00 "KEY1,Key Register 1" hexmask.long 0x00 0.--31. 1. "VALUE,Key 1" group.long 0x18++0x03 line.long 0x00 "KEY2,Key Register 2" hexmask.long 0x00 0.--31. 1. "VALUE,Key 2" group.long 0x1C++0x03 line.long 0x00 "KEY3,Key Register 3" hexmask.long 0x00 0.--31. 1. "VALUE,Key 3" group.long 0x20++0x03 line.long 0x00 "TESTDATA,Test Data Register" hexmask.long 0x00 0.--31. 1. "VALUE,Test data input to conditioning function or to the continuous tests" group.long 0x30++0x03 line.long 0x00 "STATUS,Status Register" rbitfld.long 0x00 9. "ALMIF,AIS31 Noise Alarm interrupt status" "0,1" bitfld.long 0x00 8. "PREIF,AIS31 Preliminary Noise Alarm interrupt status" "0,1" newline rbitfld.long 0x00 7. "FULLIF,FIFO Full Interrupt Status" "0,1" rbitfld.long 0x00 6. "APT4096IF,Adaptive Proportion test failure (4096-sample window) interrupt status" "0,1" newline rbitfld.long 0x00 5. "APT64IF,Adaptive Proportion test failure (64-sample window) interrupt status" "0,1" rbitfld.long 0x00 4. "REPCOUNTIF,Repetition Count Test Interrupt Status" "0,1" newline rbitfld.long 0x00 0. "TESTDATABUSY,Test Data Busy" "0,1" group.long 0x34++0x03 line.long 0x00 "INITWAITVAL,Initial Wait Counter" hexmask.long.word 0x00 0.--9. 1. "VALUE,Wait counter value" rgroup.long 0x100++0x03 line.long 0x00 "FIFO,FIFO Data" hexmask.long 0x00 0.--31. 1. "VALUE,FIFO Read Data" group.long 0x300++0x03 line.long 0x00 "CORECLKCONTROL,Core Clock Control Register" bitfld.long 0x00 4.--6. "CORECLKPRESC,Clock division factor of CORECLKPRESC+1" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. "CORECLKDIS,Core Clock Disable" "0,1" tree.end tree "UART (Universal Asynchronous Receiver/Transmitter)" repeat 2. (list 0. 1.) (list ad:0x40014000 ad:0x40014400) tree "UART$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 31. "SMSDELAY,Synchronous Master Sample Delay" "0,1" bitfld.long 0x00 30. "MVDIS,Majority Vote Disable" "0,1" newline bitfld.long 0x00 29. "AUTOTX,Always Transmit When RX Not Full" "0,1" bitfld.long 0x00 28. "BYTESWAP,Byteswap in Double Accesses" "0,1" newline bitfld.long 0x00 25. "SSSEARLY,Synchronous Slave Setup Early" "0,1" bitfld.long 0x00 24. "ERRSTX,Disable TX on Error" "0,1" newline bitfld.long 0x00 23. "ERRSRX,Disable RX on Error" "0,1" bitfld.long 0x00 22. "ERRSDMA,Halt DMA on Error" "0,1" newline bitfld.long 0x00 21. "BIT8DV,Bit 8 Default Value" "0,1" bitfld.long 0x00 20. "SKIPPERRF,Skip Parity Error Frames" "0,1" newline bitfld.long 0x00 19. "SCRETRANS,SmartCard Retransmit" "0,1" bitfld.long 0x00 18. "SCMODE,SmartCard Mode" "0,1" newline bitfld.long 0x00 17. "AUTOTRI,Automatic TX Tristate" "0,1" bitfld.long 0x00 16. "AUTOCS,Automatic Chip Select" "0,1" newline bitfld.long 0x00 15. "CSINV,Chip Select Invert" "0,1" bitfld.long 0x00 14. "TXINV,Transmitter Output Invert" "0,1" newline bitfld.long 0x00 13. "RXINV,Receiver Input Invert" "0,1" bitfld.long 0x00 12. "TXBIL,TX Buffer Interrupt Level" "0,1" newline bitfld.long 0x00 11. "CSMA,Action on Slave-Select in Master Mode" "0,1" bitfld.long 0x00 10. "MSBF,Most Significant Bit First" "0,1" newline bitfld.long 0x00 9. "CLKPHA,Clock Edge for Setup/Sample" "0,1" bitfld.long 0x00 8. "CLKPOL,Clock Polarity" "0,1" newline bitfld.long 0x00 5.--6. "OVS,Oversampling" "0: Regular UART mode with 16X oversampling in..,1: Double speed with 8X oversampling in..,2: 6X oversampling in asynchronous mode,3: Quadruple speed with 4X oversampling in.." bitfld.long 0x00 4. "MPAB,Multi-Processor Address-Bit" "0,1" newline bitfld.long 0x00 3. "MPM,Multi-Processor Mode" "0,1" bitfld.long 0x00 2. "CCEN,Collision Check Enable" "0,1" newline bitfld.long 0x00 1. "LOOPBK,Loopback Enable" "0,1" bitfld.long 0x00 0. "SYNC,USART Synchronous Mode" "0,1" group.long 0x04++0x03 line.long 0x00 "FRAME,USART Frame Format Register" bitfld.long 0x00 12.--13. "STOPBITS,Stop-Bit Mode" "0: The transmitter generates a half stop bit,1: One stop bit is generated and verified,2: The transmitter generates one and a half stop..,3: The transmitter generates two stop bits" bitfld.long 0x00 8.--9. "PARITY,Parity-Bit Mode" "0: Parity bits are not used,?,2: Even parity are used,3: Odd parity is used" newline bitfld.long 0x00 0.--3. "DATABITS,Data-Bit Mode" "?,1: Each frame contains 4 data bits,2: Each frame contains 5 data bits,3: Each frame contains 6 data bits,4: Each frame contains 7 data bits,5: Each frame contains 8 data bits,6: Each frame contains 9 data bits,7: Each frame contains 10 data bits,8: Each frame contains 11 data bits,9: Each frame contains 12 data bits,10: Each frame contains 13 data bits,11: Each frame contains 14 data bits,12: Each frame contains 15 data bits,13: Each frame contains 16 data bits,?..." group.long 0x08++0x03 line.long 0x00 "TRIGCTRL,USART Trigger Control Register" bitfld.long 0x00 16.--19. "TSEL,Trigger PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" bitfld.long 0x00 12. "RXATX2EN,Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times" "0,1" newline bitfld.long 0x00 11. "RXATX1EN,Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times" "0,1" bitfld.long 0x00 10. "RXATX0EN,Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times" "0,1" newline bitfld.long 0x00 9. "TXARX2EN,Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL" "0,1" bitfld.long 0x00 8. "TXARX1EN,Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL" "0,1" newline bitfld.long 0x00 7. "TXARX0EN,Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL" "0,1" bitfld.long 0x00 6. "AUTOTXTEN,AUTOTX Trigger Enable" "0,1" newline bitfld.long 0x00 5. "TXTEN,Transmit Trigger Enable" "0,1" bitfld.long 0x00 4. "RXTEN,Receive Trigger Enable" "0,1" wgroup.long 0x0C++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 11. "CLEARRX,Clear RX" "0,1" bitfld.long 0x00 10. "CLEARTX,Clear TX" "0,1" newline bitfld.long 0x00 9. "TXTRIDIS,Transmitter Tristate Disable" "0,1" bitfld.long 0x00 8. "TXTRIEN,Transmitter Tristate Enable" "0,1" newline bitfld.long 0x00 7. "RXBLOCKDIS,Receiver Block Disable" "0,1" bitfld.long 0x00 6. "RXBLOCKEN,Receiver Block Enable" "0,1" newline bitfld.long 0x00 5. "MASTERDIS,Master Disable" "0,1" bitfld.long 0x00 4. "MASTEREN,Master Enable" "0,1" newline bitfld.long 0x00 3. "TXDIS,Transmitter Disable" "0,1" bitfld.long 0x00 2. "TXEN,Transmitter Enable" "0,1" newline bitfld.long 0x00 1. "RXDIS,Receiver Disable" "0,1" bitfld.long 0x00 0. "RXEN,Receiver Enable" "0,1" rgroup.long 0x10++0x03 line.long 0x00 "STATUS,USART Status Register" bitfld.long 0x00 16.--17. "TXBUFCNT,TX Buffer Count" "0,1,2,3" bitfld.long 0x00 14. "TIMERRESTARTED,The USART Timer Restarted Itself" "0,1" newline bitfld.long 0x00 13. "TXIDLE,TX Idle" "0,1" bitfld.long 0x00 12. "RXFULLRIGHT,RX Full of Right Data" "0,1" newline bitfld.long 0x00 11. "RXDATAVRIGHT,RX Data Right" "0,1" bitfld.long 0x00 10. "TXBSRIGHT,TX Buffer Expects Single Right Data" "0,1" newline bitfld.long 0x00 9. "TXBDRIGHT,TX Buffer Expects Double Right Data" "0,1" bitfld.long 0x00 8. "RXFULL,RX FIFO Full" "0,1" newline bitfld.long 0x00 7. "RXDATAV,RX Data Valid" "0,1" bitfld.long 0x00 6. "TXBL,TX Buffer Level" "0,1" newline bitfld.long 0x00 5. "TXC,TX Complete" "0,1" bitfld.long 0x00 4. "TXTRI,Transmitter Tristated" "0,1" newline bitfld.long 0x00 3. "RXBLOCK,Block Incoming Data" "0,1" bitfld.long 0x00 2. "MASTER,SPI Master Mode" "0,1" newline bitfld.long 0x00 1. "TXENS,Transmitter Enable Status" "0,1" bitfld.long 0x00 0. "RXENS,Receiver Enable Status" "0,1" group.long 0x14++0x03 line.long 0x00 "CLKDIV,Clock Control Register" bitfld.long 0x00 31. "AUTOBAUDEN,AUTOBAUD Detection Enable" "0,1" hexmask.long.tbyte 0x00 3.--22. 1. "DIV,Fractional Clock Divider" rgroup.long 0x18++0x03 line.long 0x00 "RXDATAX,RX Buffer Data Extended Register" bitfld.long 0x00 15. "FERR,Data Framing Error" "0,1" bitfld.long 0x00 14. "PERR,Data Parity Error" "0,1" newline hexmask.long.word 0x00 0.--8. 1. "RXDATA,RX Data" rgroup.long 0x1C++0x03 line.long 0x00 "RXDATA,RX Buffer Data Register" hexmask.long.byte 0x00 0.--7. 1. "RXDATA,RX Data" rgroup.long 0x20++0x03 line.long 0x00 "RXDOUBLEX,RX Buffer Double Data Extended Register" bitfld.long 0x00 31. "FERR1,Data Framing Error 1" "0,1" bitfld.long 0x00 30. "PERR1,Data Parity Error 1" "0,1" newline hexmask.long.word 0x00 16.--24. 1. "RXDATA1,RX Data 1" bitfld.long 0x00 15. "FERR0,Data Framing Error 0" "0,1" newline bitfld.long 0x00 14. "PERR0,Data Parity Error 0" "0,1" hexmask.long.word 0x00 0.--8. 1. "RXDATA0,RX Data 0" rgroup.long 0x24++0x03 line.long 0x00 "RXDOUBLE,RX FIFO Double Data Register" hexmask.long.byte 0x00 8.--15. 1. "RXDATA1,RX Data 1" hexmask.long.byte 0x00 0.--7. 1. "RXDATA0,RX Data 0" rgroup.long 0x28++0x03 line.long 0x00 "RXDATAXP,RX Buffer Data Extended Peek Register" bitfld.long 0x00 15. "FERRP,Data Framing Error Peek" "0,1" bitfld.long 0x00 14. "PERRP,Data Parity Error Peek" "0,1" newline hexmask.long.word 0x00 0.--8. 1. "RXDATAP,RX Data Peek" rgroup.long 0x2C++0x03 line.long 0x00 "RXDOUBLEXP,RX Buffer Double Data Extended Peek Register" bitfld.long 0x00 31. "FERRP1,Data Framing Error 1 Peek" "0,1" bitfld.long 0x00 30. "PERRP1,Data Parity Error 1 Peek" "0,1" newline hexmask.long.word 0x00 16.--24. 1. "RXDATAP1,RX Data 1 Peek" bitfld.long 0x00 15. "FERRP0,Data Framing Error 0 Peek" "0,1" newline bitfld.long 0x00 14. "PERRP0,Data Parity Error 0 Peek" "0,1" hexmask.long.word 0x00 0.--8. 1. "RXDATAP0,RX Data 0 Peek" group.long 0x30++0x03 line.long 0x00 "TXDATAX,TX Buffer Data Extended Register" bitfld.long 0x00 15. "RXENAT,Enable RX After Transmission" "0,1" bitfld.long 0x00 14. "TXDISAT,Clear TXEN After Transmission" "0,1" newline bitfld.long 0x00 13. "TXBREAK,Transmit Data as Break" "0,1" bitfld.long 0x00 12. "TXTRIAT,Set TXTRI After Transmission" "0,1" newline bitfld.long 0x00 11. "UBRXAT,Unblock RX After Transmission" "0,1" hexmask.long.word 0x00 0.--8. 1. "TXDATAX,TX Data" group.long 0x34++0x03 line.long 0x00 "TXDATA,TX Buffer Data Register" hexmask.long.byte 0x00 0.--7. 1. "TXDATA,TX Data" group.long 0x38++0x03 line.long 0x00 "TXDOUBLEX,TX Buffer Double Data Extended Register" bitfld.long 0x00 31. "RXENAT1,Enable RX After Transmission" "0,1" bitfld.long 0x00 30. "TXDISAT1,Clear TXEN After Transmission" "0,1" newline bitfld.long 0x00 29. "TXBREAK1,Transmit Data as Break" "0,1" bitfld.long 0x00 28. "TXTRIAT1,Set TXTRI After Transmission" "0,1" newline bitfld.long 0x00 27. "UBRXAT1,Unblock RX After Transmission" "0,1" hexmask.long.word 0x00 16.--24. 1. "TXDATA1,TX Data" newline bitfld.long 0x00 15. "RXENAT0,Enable RX After Transmission" "0,1" bitfld.long 0x00 14. "TXDISAT0,Clear TXEN After Transmission" "0,1" newline bitfld.long 0x00 13. "TXBREAK0,Transmit Data as Break" "0,1" bitfld.long 0x00 12. "TXTRIAT0,Set TXTRI After Transmission" "0,1" newline bitfld.long 0x00 11. "UBRXAT0,Unblock RX After Transmission" "0,1" hexmask.long.word 0x00 0.--8. 1. "TXDATA0,TX Data" group.long 0x3C++0x03 line.long 0x00 "TXDOUBLE,TX Buffer Double Data Register" hexmask.long.byte 0x00 8.--15. 1. "TXDATA1,TX Data" hexmask.long.byte 0x00 0.--7. 1. "TXDATA0,TX Data" rgroup.long 0x40++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 16. "TCMP2,Timer Comparator 2 Interrupt Flag" "0,1" bitfld.long 0x00 15. "TCMP1,Timer Comparator 1 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "TCMP0,Timer Comparator 0 Interrupt Flag" "0,1" bitfld.long 0x00 13. "TXIDLE,TX Idle Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CCF,Collision Check Fail Interrupt Flag" "0,1" bitfld.long 0x00 11. "SSM,Slave-Select in Master Mode Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "MPAF,Multi-Processor Address Frame Interrupt Flag" "0,1" bitfld.long 0x00 9. "FERR,Framing Error Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "PERR,Parity Error Interrupt Flag" "0,1" bitfld.long 0x00 7. "TXUF,TX Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "TXOF,TX Overflow Interrupt Flag" "0,1" bitfld.long 0x00 5. "RXUF,RX Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXOF,RX Overflow Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXFULL,RX Buffer Full Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "RXDATAV,RX Data Valid Interrupt Flag" "0,1" bitfld.long 0x00 1. "TXBL,TX Buffer Level Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,TX Complete Interrupt Flag" "0,1" wgroup.long 0x44++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 16. "TCMP2,Set TCMP2 Interrupt Flag" "0,1" bitfld.long 0x00 15. "TCMP1,Set TCMP1 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "TCMP0,Set TCMP0 Interrupt Flag" "0,1" bitfld.long 0x00 13. "TXIDLE,Set TXIDLE Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CCF,Set CCF Interrupt Flag" "0,1" bitfld.long 0x00 11. "SSM,Set SSM Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "MPAF,Set MPAF Interrupt Flag" "0,1" bitfld.long 0x00 9. "FERR,Set FERR Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "PERR,Set PERR Interrupt Flag" "0,1" bitfld.long 0x00 7. "TXUF,Set TXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "TXOF,Set TXOF Interrupt Flag" "0,1" bitfld.long 0x00 5. "RXUF,Set RXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXOF,Set RXOF Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXFULL,Set RXFULL Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,Set TXC Interrupt Flag" "0,1" wgroup.long 0x48++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 16. "TCMP2,Clear TCMP2 Interrupt Flag" "0,1" bitfld.long 0x00 15. "TCMP1,Clear TCMP1 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "TCMP0,Clear TCMP0 Interrupt Flag" "0,1" bitfld.long 0x00 13. "TXIDLE,Clear TXIDLE Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CCF,Clear CCF Interrupt Flag" "0,1" bitfld.long 0x00 11. "SSM,Clear SSM Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "MPAF,Clear MPAF Interrupt Flag" "0,1" bitfld.long 0x00 9. "FERR,Clear FERR Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "PERR,Clear PERR Interrupt Flag" "0,1" bitfld.long 0x00 7. "TXUF,Clear TXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "TXOF,Clear TXOF Interrupt Flag" "0,1" bitfld.long 0x00 5. "RXUF,Clear RXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXOF,Clear RXOF Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXFULL,Clear RXFULL Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,Clear TXC Interrupt Flag" "0,1" group.long 0x4C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 16. "TCMP2,TCMP2 Interrupt Enable" "0,1" bitfld.long 0x00 15. "TCMP1,TCMP1 Interrupt Enable" "0,1" newline bitfld.long 0x00 14. "TCMP0,TCMP0 Interrupt Enable" "0,1" bitfld.long 0x00 13. "TXIDLE,TXIDLE Interrupt Enable" "0,1" newline bitfld.long 0x00 12. "CCF,CCF Interrupt Enable" "0,1" bitfld.long 0x00 11. "SSM,SSM Interrupt Enable" "0,1" newline bitfld.long 0x00 10. "MPAF,MPAF Interrupt Enable" "0,1" bitfld.long 0x00 9. "FERR,FERR Interrupt Enable" "0,1" newline bitfld.long 0x00 8. "PERR,PERR Interrupt Enable" "0,1" bitfld.long 0x00 7. "TXUF,TXUF Interrupt Enable" "0,1" newline bitfld.long 0x00 6. "TXOF,TXOF Interrupt Enable" "0,1" bitfld.long 0x00 5. "RXUF,RXUF Interrupt Enable" "0,1" newline bitfld.long 0x00 4. "RXOF,RXOF Interrupt Enable" "0,1" bitfld.long 0x00 3. "RXFULL,RXFULL Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "RXDATAV,RXDATAV Interrupt Enable" "0,1" bitfld.long 0x00 1. "TXBL,TXBL Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "TXC,TXC Interrupt Enable" "0,1" group.long 0x50++0x03 line.long 0x00 "IRCTRL,IrDA Control Register" bitfld.long 0x00 8.--11. "IRPRSSEL,IrDA PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" bitfld.long 0x00 7. "IRPRSEN,IrDA PRS Channel Enable" "0,1" newline bitfld.long 0x00 3. "IRFILT,IrDA RX Filter" "0,1" bitfld.long 0x00 1.--2. "IRPW,IrDA TX Pulse Width" "0: IrDA pulse width is 1/16 for OVS=0 and 1/8..,1: IrDA pulse width is 2/16 for OVS=0 and 2/8..,2: IrDA pulse width is 3/16 for OVS=0 and 3/8..,3: IrDA pulse width is 4/16 for OVS=0 and 4/8.." newline bitfld.long 0x00 0. "IREN,Enable IrDA Module" "0,1" group.long 0x58++0x03 line.long 0x00 "INPUT,USART Input Register" bitfld.long 0x00 15. "CLKPRS,PRS CLK Enable" "0,1" bitfld.long 0x00 8.--11. "CLKPRSSEL,CLK PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" newline bitfld.long 0x00 7. "RXPRS,PRS RX Enable" "0,1" bitfld.long 0x00 0.--3. "RXPRSSEL,RX PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" group.long 0x5C++0x03 line.long 0x00 "I2SCTRL,I2S Control Register" bitfld.long 0x00 8.--10. "FORMAT,I2S Word Format" "0: 32-bit word 32-bit data,1: 32-bit word 32-bit data with 8 lsb masked,2: 32-bit word 24-bit data,3: 32-bit word 16-bit data,4: 32-bit word 8-bit data,5: 16-bit word 16-bit data,6: 16-bit word 8-bit data,7: 8-bit word 8-bit data" bitfld.long 0x00 4. "DELAY,Delay on I2S Data" "0,1" newline bitfld.long 0x00 3. "DMASPLIT,Separate DMA Request for Left/Right Data" "0,1" bitfld.long 0x00 2. "JUSTIFY,Justification of I2S Data" "0,1" newline bitfld.long 0x00 1. "MONO,Stero or Mono" "0,1" bitfld.long 0x00 0. "EN,Enable I2S Mode" "0,1" group.long 0x60++0x03 line.long 0x00 "TIMING,Timing Register" bitfld.long 0x00 28.--30. "CSHOLD,Chip Select Hold" "0: Disable CS being asserted after the end of..,1: CS is asserted for 1 baud-times after the end..,2: CS is asserted for 2 baud-times after the end..,3: CS is asserted for 3 baud-times after the end..,4: CS is asserted for 7 baud-times after the end..,5: CS is asserted after the end of transmission..,6: CS is asserted after the end of transmission..,7: CS is asserted after the end of transmission.." bitfld.long 0x00 24.--26. "ICS,Inter-character Spacing" "0: There is no space between charcters,1: Create a space of 1 baud-times before start..,2: Create a space of 2 baud-times before start..,3: Create a space of 3 baud-times before start..,4: Create a space of 7 baud-times before start..,5: Create a space of before the start of..,6: Create a space of before the start of..,7: Create a space of before the start of.." newline bitfld.long 0x00 20.--22. "CSSETUP,Chip Select Setup" "0: CS is not asserted before start of transmission,1: CS is asserted for 1 baud-times before start..,2: CS is asserted for 2 baud-times before start..,3: CS is asserted for 3 baud-times before start..,4: CS is asserted for 7 baud-times before start..,5: CS is asserted before the start of..,6: CS is asserted before the start of..,7: CS is asserted before the start of.." bitfld.long 0x00 16.--18. "TXDELAY,TX Frame Start Delay" "0: Disable - TXDELAY in USARTn_CTRL can be used..,1: Start of transmission is delayed for 1..,2: Start of transmission is delayed for 2..,3: Start of transmission is delayed for 3..,4: Start of transmission is delayed for 7..,5: Start of transmission is delayed for TCMPVAL0..,6: Start of transmission is delayed for TCMPVAL1..,7: Start of transmission is delayed for TCMPVAL2.." group.long 0x64++0x03 line.long 0x00 "CTRLX,Control Register Extended" bitfld.long 0x00 3. "RTSINV,RTS Pin Inversion" "0,1" bitfld.long 0x00 2. "CTSEN,CTS Function Enabled" "0,1" newline bitfld.long 0x00 1. "CTSINV,CTS Pin Inversion" "0,1" bitfld.long 0x00 0. "DBGHALT,Debug Halt" "0,1" group.long 0x68++0x03 line.long 0x00 "TIMECMP0,Used to Generate Interrupts and Various Delays" bitfld.long 0x00 24. "RESTARTEN,Restart Timer on TCMP0" "0,1" bitfld.long 0x00 20.--22. "TSTOP,Source Used to Disable Comparator 0" "0: Comparator 0 is disabled when the counter..,1: Comparator 0 is disabled at the start of..,2: Comparator 0 is disabled on RX going going..,3: Comparator 0 is disabled on RX going Inactive,?..." newline bitfld.long 0x00 16.--18. "TSTART,Timer Start Source" "0: Comparator 0 is disabled,1: Comparator 0 and timer are started at TX end..,2: Comparator 0 and timer are started at TX..,3: Comparator 0 and timer are started at RX..,4: Comparator 0 and timer are started at RX end..,?..." hexmask.long.byte 0x00 0.--7. 1. "TCMPVAL,Timer Comparator 0" group.long 0x6C++0x03 line.long 0x00 "TIMECMP1,Used to Generate Interrupts and Various Delays" bitfld.long 0x00 24. "RESTARTEN,Restart Timer on TCMP1" "0,1" bitfld.long 0x00 20.--22. "TSTOP,Source Used to Disable Comparator 1" "0: Comparator 1 is disabled when the counter..,1: Comparator 1 is disabled at TX start TX Engine,2: Comparator 1 is disabled on RX going going..,3: Comparator 1 is disabled on RX going Inactive,?..." newline bitfld.long 0x00 16.--18. "TSTART,Timer Start Source" "0: Comparator 1 is disabled,1: Comparator 1 and timer are started at TX end..,2: Comparator 1 and timer are started at TX..,3: Comparator 1 and timer are started at RX..,4: Comparator 1 and timer are started at RX end..,?..." hexmask.long.byte 0x00 0.--7. 1. "TCMPVAL,Timer Comparator 1" group.long 0x70++0x03 line.long 0x00 "TIMECMP2,Used to Generate Interrupts and Various Delays" bitfld.long 0x00 24. "RESTARTEN,Restart Timer on TCMP2" "0,1" bitfld.long 0x00 20.--22. "TSTOP,Source Used to Disable Comparator 2" "0: Comparator 2 is disabled when the counter..,1: Comparator 2 is disabled at TX start TX Engine,2: Comparator 2 is disabled on RX going going..,3: Comparator 2 is disabled on RX going Inactive,?..." newline bitfld.long 0x00 16.--18. "TSTART,Timer Start Source" "0: Comparator 2 is disabled,1: Comparator 2 and timer are started at TX end..,2: Comparator 2 and timer are started at TX..,3: Comparator 2 and timer are started at RX..,4: Comparator 2 and timer are started at RX end..,?..." hexmask.long.byte 0x00 0.--7. 1. "TCMPVAL,Timer Comparator 2" group.long 0x74++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 5. "RTSPEN,RTS Pin Enable" "0,1" bitfld.long 0x00 4. "CTSPEN,CTS Pin Enable" "0,1" newline bitfld.long 0x00 3. "CLKPEN,CLK Pin Enable" "0,1" bitfld.long 0x00 2. "CSPEN,CS Pin Enable" "0,1" newline bitfld.long 0x00 1. "TXPEN,TX Pin Enable" "0,1" bitfld.long 0x00 0. "RXPEN,RX Pin Enable" "0,1" group.long 0x78++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 24.--29. "CLKLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." bitfld.long 0x00 16.--21. "CSLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." newline bitfld.long 0x00 8.--13. "TXLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." bitfld.long 0x00 0.--5. "RXLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." group.long 0x7C++0x03 line.long 0x00 "ROUTELOC1,I/O Routing Location Register" bitfld.long 0x00 8.--13. "RTSLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." bitfld.long 0x00 0.--5. "CTSLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." tree.end repeat.end tree.end tree "USART (USART0)" repeat 5. (list 0. 1. 2. 3. 4.) (list ad:0x40010000 ad:0x40010400 ad:0x40010800 ad:0x40010C00 ad:0x40011000) tree "USART$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 31. "SMSDELAY,Synchronous Master Sample Delay" "0,1" bitfld.long 0x00 30. "MVDIS,Majority Vote Disable" "0,1" newline bitfld.long 0x00 29. "AUTOTX,Always Transmit When RX Not Full" "0,1" bitfld.long 0x00 28. "BYTESWAP,Byteswap in Double Accesses" "0,1" newline bitfld.long 0x00 25. "SSSEARLY,Synchronous Slave Setup Early" "0,1" bitfld.long 0x00 24. "ERRSTX,Disable TX on Error" "0,1" newline bitfld.long 0x00 23. "ERRSRX,Disable RX on Error" "0,1" bitfld.long 0x00 22. "ERRSDMA,Halt DMA on Error" "0,1" newline bitfld.long 0x00 21. "BIT8DV,Bit 8 Default Value" "0,1" bitfld.long 0x00 20. "SKIPPERRF,Skip Parity Error Frames" "0,1" newline bitfld.long 0x00 19. "SCRETRANS,SmartCard Retransmit" "0,1" bitfld.long 0x00 18. "SCMODE,SmartCard Mode" "0,1" newline bitfld.long 0x00 17. "AUTOTRI,Automatic TX Tristate" "0,1" bitfld.long 0x00 16. "AUTOCS,Automatic Chip Select" "0,1" newline bitfld.long 0x00 15. "CSINV,Chip Select Invert" "0,1" bitfld.long 0x00 14. "TXINV,Transmitter Output Invert" "0,1" newline bitfld.long 0x00 13. "RXINV,Receiver Input Invert" "0,1" bitfld.long 0x00 12. "TXBIL,TX Buffer Interrupt Level" "0,1" newline bitfld.long 0x00 11. "CSMA,Action on Slave-Select in Master Mode" "0,1" bitfld.long 0x00 10. "MSBF,Most Significant Bit First" "0,1" newline bitfld.long 0x00 9. "CLKPHA,Clock Edge for Setup/Sample" "0,1" bitfld.long 0x00 8. "CLKPOL,Clock Polarity" "0,1" newline bitfld.long 0x00 5.--6. "OVS,Oversampling" "0: Regular UART mode with 16X oversampling in..,1: Double speed with 8X oversampling in..,2: 6X oversampling in asynchronous mode,3: Quadruple speed with 4X oversampling in.." bitfld.long 0x00 4. "MPAB,Multi-Processor Address-Bit" "0,1" newline bitfld.long 0x00 3. "MPM,Multi-Processor Mode" "0,1" bitfld.long 0x00 2. "CCEN,Collision Check Enable" "0,1" newline bitfld.long 0x00 1. "LOOPBK,Loopback Enable" "0,1" bitfld.long 0x00 0. "SYNC,USART Synchronous Mode" "0,1" group.long 0x04++0x03 line.long 0x00 "FRAME,USART Frame Format Register" bitfld.long 0x00 12.--13. "STOPBITS,Stop-Bit Mode" "0: The transmitter generates a half stop bit,1: One stop bit is generated and verified,2: The transmitter generates one and a half stop..,3: The transmitter generates two stop bits" bitfld.long 0x00 8.--9. "PARITY,Parity-Bit Mode" "0: Parity bits are not used,?,2: Even parity are used,3: Odd parity is used" newline bitfld.long 0x00 0.--3. "DATABITS,Data-Bit Mode" "?,1: Each frame contains 4 data bits,2: Each frame contains 5 data bits,3: Each frame contains 6 data bits,4: Each frame contains 7 data bits,5: Each frame contains 8 data bits,6: Each frame contains 9 data bits,7: Each frame contains 10 data bits,8: Each frame contains 11 data bits,9: Each frame contains 12 data bits,10: Each frame contains 13 data bits,11: Each frame contains 14 data bits,12: Each frame contains 15 data bits,13: Each frame contains 16 data bits,?..." group.long 0x08++0x03 line.long 0x00 "TRIGCTRL,USART Trigger Control Register" bitfld.long 0x00 16.--19. "TSEL,Trigger PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" bitfld.long 0x00 12. "RXATX2EN,Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times" "0,1" newline bitfld.long 0x00 11. "RXATX1EN,Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times" "0,1" bitfld.long 0x00 10. "RXATX0EN,Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times" "0,1" newline bitfld.long 0x00 9. "TXARX2EN,Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL" "0,1" bitfld.long 0x00 8. "TXARX1EN,Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL" "0,1" newline bitfld.long 0x00 7. "TXARX0EN,Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL" "0,1" bitfld.long 0x00 6. "AUTOTXTEN,AUTOTX Trigger Enable" "0,1" newline bitfld.long 0x00 5. "TXTEN,Transmit Trigger Enable" "0,1" bitfld.long 0x00 4. "RXTEN,Receive Trigger Enable" "0,1" wgroup.long 0x0C++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 11. "CLEARRX,Clear RX" "0,1" bitfld.long 0x00 10. "CLEARTX,Clear TX" "0,1" newline bitfld.long 0x00 9. "TXTRIDIS,Transmitter Tristate Disable" "0,1" bitfld.long 0x00 8. "TXTRIEN,Transmitter Tristate Enable" "0,1" newline bitfld.long 0x00 7. "RXBLOCKDIS,Receiver Block Disable" "0,1" bitfld.long 0x00 6. "RXBLOCKEN,Receiver Block Enable" "0,1" newline bitfld.long 0x00 5. "MASTERDIS,Master Disable" "0,1" bitfld.long 0x00 4. "MASTEREN,Master Enable" "0,1" newline bitfld.long 0x00 3. "TXDIS,Transmitter Disable" "0,1" bitfld.long 0x00 2. "TXEN,Transmitter Enable" "0,1" newline bitfld.long 0x00 1. "RXDIS,Receiver Disable" "0,1" bitfld.long 0x00 0. "RXEN,Receiver Enable" "0,1" rgroup.long 0x10++0x03 line.long 0x00 "STATUS,USART Status Register" bitfld.long 0x00 16.--17. "TXBUFCNT,TX Buffer Count" "0,1,2,3" bitfld.long 0x00 14. "TIMERRESTARTED,The USART Timer Restarted Itself" "0,1" newline bitfld.long 0x00 13. "TXIDLE,TX Idle" "0,1" bitfld.long 0x00 12. "RXFULLRIGHT,RX Full of Right Data" "0,1" newline bitfld.long 0x00 11. "RXDATAVRIGHT,RX Data Right" "0,1" bitfld.long 0x00 10. "TXBSRIGHT,TX Buffer Expects Single Right Data" "0,1" newline bitfld.long 0x00 9. "TXBDRIGHT,TX Buffer Expects Double Right Data" "0,1" bitfld.long 0x00 8. "RXFULL,RX FIFO Full" "0,1" newline bitfld.long 0x00 7. "RXDATAV,RX Data Valid" "0,1" bitfld.long 0x00 6. "TXBL,TX Buffer Level" "0,1" newline bitfld.long 0x00 5. "TXC,TX Complete" "0,1" bitfld.long 0x00 4. "TXTRI,Transmitter Tristated" "0,1" newline bitfld.long 0x00 3. "RXBLOCK,Block Incoming Data" "0,1" bitfld.long 0x00 2. "MASTER,SPI Master Mode" "0,1" newline bitfld.long 0x00 1. "TXENS,Transmitter Enable Status" "0,1" bitfld.long 0x00 0. "RXENS,Receiver Enable Status" "0,1" group.long 0x14++0x03 line.long 0x00 "CLKDIV,Clock Control Register" bitfld.long 0x00 31. "AUTOBAUDEN,AUTOBAUD Detection Enable" "0,1" hexmask.long.tbyte 0x00 3.--22. 1. "DIV,Fractional Clock Divider" rgroup.long 0x18++0x03 line.long 0x00 "RXDATAX,RX Buffer Data Extended Register" bitfld.long 0x00 15. "FERR,Data Framing Error" "0,1" bitfld.long 0x00 14. "PERR,Data Parity Error" "0,1" newline hexmask.long.word 0x00 0.--8. 1. "RXDATA,RX Data" rgroup.long 0x1C++0x03 line.long 0x00 "RXDATA,RX Buffer Data Register" hexmask.long.byte 0x00 0.--7. 1. "RXDATA,RX Data" rgroup.long 0x20++0x03 line.long 0x00 "RXDOUBLEX,RX Buffer Double Data Extended Register" bitfld.long 0x00 31. "FERR1,Data Framing Error 1" "0,1" bitfld.long 0x00 30. "PERR1,Data Parity Error 1" "0,1" newline hexmask.long.word 0x00 16.--24. 1. "RXDATA1,RX Data 1" bitfld.long 0x00 15. "FERR0,Data Framing Error 0" "0,1" newline bitfld.long 0x00 14. "PERR0,Data Parity Error 0" "0,1" hexmask.long.word 0x00 0.--8. 1. "RXDATA0,RX Data 0" rgroup.long 0x24++0x03 line.long 0x00 "RXDOUBLE,RX FIFO Double Data Register" hexmask.long.byte 0x00 8.--15. 1. "RXDATA1,RX Data 1" hexmask.long.byte 0x00 0.--7. 1. "RXDATA0,RX Data 0" rgroup.long 0x28++0x03 line.long 0x00 "RXDATAXP,RX Buffer Data Extended Peek Register" bitfld.long 0x00 15. "FERRP,Data Framing Error Peek" "0,1" bitfld.long 0x00 14. "PERRP,Data Parity Error Peek" "0,1" newline hexmask.long.word 0x00 0.--8. 1. "RXDATAP,RX Data Peek" rgroup.long 0x2C++0x03 line.long 0x00 "RXDOUBLEXP,RX Buffer Double Data Extended Peek Register" bitfld.long 0x00 31. "FERRP1,Data Framing Error 1 Peek" "0,1" bitfld.long 0x00 30. "PERRP1,Data Parity Error 1 Peek" "0,1" newline hexmask.long.word 0x00 16.--24. 1. "RXDATAP1,RX Data 1 Peek" bitfld.long 0x00 15. "FERRP0,Data Framing Error 0 Peek" "0,1" newline bitfld.long 0x00 14. "PERRP0,Data Parity Error 0 Peek" "0,1" hexmask.long.word 0x00 0.--8. 1. "RXDATAP0,RX Data 0 Peek" group.long 0x30++0x03 line.long 0x00 "TXDATAX,TX Buffer Data Extended Register" bitfld.long 0x00 15. "RXENAT,Enable RX After Transmission" "0,1" bitfld.long 0x00 14. "TXDISAT,Clear TXEN After Transmission" "0,1" newline bitfld.long 0x00 13. "TXBREAK,Transmit Data as Break" "0,1" bitfld.long 0x00 12. "TXTRIAT,Set TXTRI After Transmission" "0,1" newline bitfld.long 0x00 11. "UBRXAT,Unblock RX After Transmission" "0,1" hexmask.long.word 0x00 0.--8. 1. "TXDATAX,TX Data" group.long 0x34++0x03 line.long 0x00 "TXDATA,TX Buffer Data Register" hexmask.long.byte 0x00 0.--7. 1. "TXDATA,TX Data" group.long 0x38++0x03 line.long 0x00 "TXDOUBLEX,TX Buffer Double Data Extended Register" bitfld.long 0x00 31. "RXENAT1,Enable RX After Transmission" "0,1" bitfld.long 0x00 30. "TXDISAT1,Clear TXEN After Transmission" "0,1" newline bitfld.long 0x00 29. "TXBREAK1,Transmit Data as Break" "0,1" bitfld.long 0x00 28. "TXTRIAT1,Set TXTRI After Transmission" "0,1" newline bitfld.long 0x00 27. "UBRXAT1,Unblock RX After Transmission" "0,1" hexmask.long.word 0x00 16.--24. 1. "TXDATA1,TX Data" newline bitfld.long 0x00 15. "RXENAT0,Enable RX After Transmission" "0,1" bitfld.long 0x00 14. "TXDISAT0,Clear TXEN After Transmission" "0,1" newline bitfld.long 0x00 13. "TXBREAK0,Transmit Data as Break" "0,1" bitfld.long 0x00 12. "TXTRIAT0,Set TXTRI After Transmission" "0,1" newline bitfld.long 0x00 11. "UBRXAT0,Unblock RX After Transmission" "0,1" hexmask.long.word 0x00 0.--8. 1. "TXDATA0,TX Data" group.long 0x3C++0x03 line.long 0x00 "TXDOUBLE,TX Buffer Double Data Register" hexmask.long.byte 0x00 8.--15. 1. "TXDATA1,TX Data" hexmask.long.byte 0x00 0.--7. 1. "TXDATA0,TX Data" rgroup.long 0x40++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 16. "TCMP2,Timer Comparator 2 Interrupt Flag" "0,1" bitfld.long 0x00 15. "TCMP1,Timer Comparator 1 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "TCMP0,Timer Comparator 0 Interrupt Flag" "0,1" bitfld.long 0x00 13. "TXIDLE,TX Idle Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CCF,Collision Check Fail Interrupt Flag" "0,1" bitfld.long 0x00 11. "SSM,Slave-Select in Master Mode Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "MPAF,Multi-Processor Address Frame Interrupt Flag" "0,1" bitfld.long 0x00 9. "FERR,Framing Error Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "PERR,Parity Error Interrupt Flag" "0,1" bitfld.long 0x00 7. "TXUF,TX Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "TXOF,TX Overflow Interrupt Flag" "0,1" bitfld.long 0x00 5. "RXUF,RX Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXOF,RX Overflow Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXFULL,RX Buffer Full Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "RXDATAV,RX Data Valid Interrupt Flag" "0,1" bitfld.long 0x00 1. "TXBL,TX Buffer Level Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,TX Complete Interrupt Flag" "0,1" wgroup.long 0x44++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 16. "TCMP2,Set TCMP2 Interrupt Flag" "0,1" bitfld.long 0x00 15. "TCMP1,Set TCMP1 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "TCMP0,Set TCMP0 Interrupt Flag" "0,1" bitfld.long 0x00 13. "TXIDLE,Set TXIDLE Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CCF,Set CCF Interrupt Flag" "0,1" bitfld.long 0x00 11. "SSM,Set SSM Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "MPAF,Set MPAF Interrupt Flag" "0,1" bitfld.long 0x00 9. "FERR,Set FERR Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "PERR,Set PERR Interrupt Flag" "0,1" bitfld.long 0x00 7. "TXUF,Set TXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "TXOF,Set TXOF Interrupt Flag" "0,1" bitfld.long 0x00 5. "RXUF,Set RXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXOF,Set RXOF Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXFULL,Set RXFULL Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,Set TXC Interrupt Flag" "0,1" wgroup.long 0x48++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 16. "TCMP2,Clear TCMP2 Interrupt Flag" "0,1" bitfld.long 0x00 15. "TCMP1,Clear TCMP1 Interrupt Flag" "0,1" newline bitfld.long 0x00 14. "TCMP0,Clear TCMP0 Interrupt Flag" "0,1" bitfld.long 0x00 13. "TXIDLE,Clear TXIDLE Interrupt Flag" "0,1" newline bitfld.long 0x00 12. "CCF,Clear CCF Interrupt Flag" "0,1" bitfld.long 0x00 11. "SSM,Clear SSM Interrupt Flag" "0,1" newline bitfld.long 0x00 10. "MPAF,Clear MPAF Interrupt Flag" "0,1" bitfld.long 0x00 9. "FERR,Clear FERR Interrupt Flag" "0,1" newline bitfld.long 0x00 8. "PERR,Clear PERR Interrupt Flag" "0,1" bitfld.long 0x00 7. "TXUF,Clear TXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "TXOF,Clear TXOF Interrupt Flag" "0,1" bitfld.long 0x00 5. "RXUF,Clear RXUF Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "RXOF,Clear RXOF Interrupt Flag" "0,1" bitfld.long 0x00 3. "RXFULL,Clear RXFULL Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TXC,Clear TXC Interrupt Flag" "0,1" group.long 0x4C++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 16. "TCMP2,TCMP2 Interrupt Enable" "0,1" bitfld.long 0x00 15. "TCMP1,TCMP1 Interrupt Enable" "0,1" newline bitfld.long 0x00 14. "TCMP0,TCMP0 Interrupt Enable" "0,1" bitfld.long 0x00 13. "TXIDLE,TXIDLE Interrupt Enable" "0,1" newline bitfld.long 0x00 12. "CCF,CCF Interrupt Enable" "0,1" bitfld.long 0x00 11. "SSM,SSM Interrupt Enable" "0,1" newline bitfld.long 0x00 10. "MPAF,MPAF Interrupt Enable" "0,1" bitfld.long 0x00 9. "FERR,FERR Interrupt Enable" "0,1" newline bitfld.long 0x00 8. "PERR,PERR Interrupt Enable" "0,1" bitfld.long 0x00 7. "TXUF,TXUF Interrupt Enable" "0,1" newline bitfld.long 0x00 6. "TXOF,TXOF Interrupt Enable" "0,1" bitfld.long 0x00 5. "RXUF,RXUF Interrupt Enable" "0,1" newline bitfld.long 0x00 4. "RXOF,RXOF Interrupt Enable" "0,1" bitfld.long 0x00 3. "RXFULL,RXFULL Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "RXDATAV,RXDATAV Interrupt Enable" "0,1" bitfld.long 0x00 1. "TXBL,TXBL Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "TXC,TXC Interrupt Enable" "0,1" group.long 0x50++0x03 line.long 0x00 "IRCTRL,IrDA Control Register" bitfld.long 0x00 8.--11. "IRPRSSEL,IrDA PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" bitfld.long 0x00 7. "IRPRSEN,IrDA PRS Channel Enable" "0,1" newline bitfld.long 0x00 3. "IRFILT,IrDA RX Filter" "0,1" bitfld.long 0x00 1.--2. "IRPW,IrDA TX Pulse Width" "0: IrDA pulse width is 1/16 for OVS=0 and 1/8..,1: IrDA pulse width is 2/16 for OVS=0 and 2/8..,2: IrDA pulse width is 3/16 for OVS=0 and 3/8..,3: IrDA pulse width is 4/16 for OVS=0 and 4/8.." newline bitfld.long 0x00 0. "IREN,Enable IrDA Module" "0,1" group.long 0x58++0x03 line.long 0x00 "INPUT,USART Input Register" bitfld.long 0x00 15. "CLKPRS,PRS CLK Enable" "0,1" bitfld.long 0x00 8.--11. "CLKPRSSEL,CLK PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" newline bitfld.long 0x00 7. "RXPRS,PRS RX Enable" "0,1" bitfld.long 0x00 0.--3. "RXPRSSEL,RX PRS Channel Select" "0: PRS Channel 0 selected,1: PRS Channel 1 selected,2: PRS Channel 2 selected,3: PRS Channel 3 selected,4: PRS Channel 4 selected,5: PRS Channel 5 selected,6: PRS Channel 6 selected,7: PRS Channel 7 selected,8: PRS Channel 8 selected,9: PRS Channel 9 selected,10: PRS Channel 10 selected,11: PRS Channel 11 selected,12: PRS Channel 12 selected,13: PRS Channel 13 selected,14: PRS Channel 14 selected,15: PRS Channel 15 selected" group.long 0x5C++0x03 line.long 0x00 "I2SCTRL,I2S Control Register" bitfld.long 0x00 8.--10. "FORMAT,I2S Word Format" "0: 32-bit word 32-bit data,1: 32-bit word 32-bit data with 8 lsb masked,2: 32-bit word 24-bit data,3: 32-bit word 16-bit data,4: 32-bit word 8-bit data,5: 16-bit word 16-bit data,6: 16-bit word 8-bit data,7: 8-bit word 8-bit data" bitfld.long 0x00 4. "DELAY,Delay on I2S Data" "0,1" newline bitfld.long 0x00 3. "DMASPLIT,Separate DMA Request for Left/Right Data" "0,1" bitfld.long 0x00 2. "JUSTIFY,Justification of I2S Data" "0,1" newline bitfld.long 0x00 1. "MONO,Stero or Mono" "0,1" bitfld.long 0x00 0. "EN,Enable I2S Mode" "0,1" group.long 0x60++0x03 line.long 0x00 "TIMING,Timing Register" bitfld.long 0x00 28.--30. "CSHOLD,Chip Select Hold" "0: Disable CS being asserted after the end of..,1: CS is asserted for 1 baud-times after the end..,2: CS is asserted for 2 baud-times after the end..,3: CS is asserted for 3 baud-times after the end..,4: CS is asserted for 7 baud-times after the end..,5: CS is asserted after the end of transmission..,6: CS is asserted after the end of transmission..,7: CS is asserted after the end of transmission.." bitfld.long 0x00 24.--26. "ICS,Inter-character Spacing" "0: There is no space between charcters,1: Create a space of 1 baud-times before start..,2: Create a space of 2 baud-times before start..,3: Create a space of 3 baud-times before start..,4: Create a space of 7 baud-times before start..,5: Create a space of before the start of..,6: Create a space of before the start of..,7: Create a space of before the start of.." newline bitfld.long 0x00 20.--22. "CSSETUP,Chip Select Setup" "0: CS is not asserted before start of transmission,1: CS is asserted for 1 baud-times before start..,2: CS is asserted for 2 baud-times before start..,3: CS is asserted for 3 baud-times before start..,4: CS is asserted for 7 baud-times before start..,5: CS is asserted before the start of..,6: CS is asserted before the start of..,7: CS is asserted before the start of.." bitfld.long 0x00 16.--18. "TXDELAY,TX Frame Start Delay" "0: Disable - TXDELAY in USARTn_CTRL can be used..,1: Start of transmission is delayed for 1..,2: Start of transmission is delayed for 2..,3: Start of transmission is delayed for 3..,4: Start of transmission is delayed for 7..,5: Start of transmission is delayed for TCMPVAL0..,6: Start of transmission is delayed for TCMPVAL1..,7: Start of transmission is delayed for TCMPVAL2.." group.long 0x64++0x03 line.long 0x00 "CTRLX,Control Register Extended" bitfld.long 0x00 3. "RTSINV,RTS Pin Inversion" "0,1" bitfld.long 0x00 2. "CTSEN,CTS Function Enabled" "0,1" newline bitfld.long 0x00 1. "CTSINV,CTS Pin Inversion" "0,1" bitfld.long 0x00 0. "DBGHALT,Debug Halt" "0,1" group.long 0x68++0x03 line.long 0x00 "TIMECMP0,Used to Generate Interrupts and Various Delays" bitfld.long 0x00 24. "RESTARTEN,Restart Timer on TCMP0" "0,1" bitfld.long 0x00 20.--22. "TSTOP,Source Used to Disable Comparator 0" "0: Comparator 0 is disabled when the counter..,1: Comparator 0 is disabled at the start of..,2: Comparator 0 is disabled on RX going going..,3: Comparator 0 is disabled on RX going Inactive,?..." newline bitfld.long 0x00 16.--18. "TSTART,Timer Start Source" "0: Comparator 0 is disabled,1: Comparator 0 and timer are started at TX end..,2: Comparator 0 and timer are started at TX..,3: Comparator 0 and timer are started at RX..,4: Comparator 0 and timer are started at RX end..,?..." hexmask.long.byte 0x00 0.--7. 1. "TCMPVAL,Timer Comparator 0" group.long 0x6C++0x03 line.long 0x00 "TIMECMP1,Used to Generate Interrupts and Various Delays" bitfld.long 0x00 24. "RESTARTEN,Restart Timer on TCMP1" "0,1" bitfld.long 0x00 20.--22. "TSTOP,Source Used to Disable Comparator 1" "0: Comparator 1 is disabled when the counter..,1: Comparator 1 is disabled at TX start TX Engine,2: Comparator 1 is disabled on RX going going..,3: Comparator 1 is disabled on RX going Inactive,?..." newline bitfld.long 0x00 16.--18. "TSTART,Timer Start Source" "0: Comparator 1 is disabled,1: Comparator 1 and timer are started at TX end..,2: Comparator 1 and timer are started at TX..,3: Comparator 1 and timer are started at RX..,4: Comparator 1 and timer are started at RX end..,?..." hexmask.long.byte 0x00 0.--7. 1. "TCMPVAL,Timer Comparator 1" group.long 0x70++0x03 line.long 0x00 "TIMECMP2,Used to Generate Interrupts and Various Delays" bitfld.long 0x00 24. "RESTARTEN,Restart Timer on TCMP2" "0,1" bitfld.long 0x00 20.--22. "TSTOP,Source Used to Disable Comparator 2" "0: Comparator 2 is disabled when the counter..,1: Comparator 2 is disabled at TX start TX Engine,2: Comparator 2 is disabled on RX going going..,3: Comparator 2 is disabled on RX going Inactive,?..." newline bitfld.long 0x00 16.--18. "TSTART,Timer Start Source" "0: Comparator 2 is disabled,1: Comparator 2 and timer are started at TX end..,2: Comparator 2 and timer are started at TX..,3: Comparator 2 and timer are started at RX..,4: Comparator 2 and timer are started at RX end..,?..." hexmask.long.byte 0x00 0.--7. 1. "TCMPVAL,Timer Comparator 2" group.long 0x74++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 5. "RTSPEN,RTS Pin Enable" "0,1" bitfld.long 0x00 4. "CTSPEN,CTS Pin Enable" "0,1" newline bitfld.long 0x00 3. "CLKPEN,CLK Pin Enable" "0,1" bitfld.long 0x00 2. "CSPEN,CS Pin Enable" "0,1" newline bitfld.long 0x00 1. "TXPEN,TX Pin Enable" "0,1" bitfld.long 0x00 0. "RXPEN,RX Pin Enable" "0,1" group.long 0x78++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 24.--29. "CLKLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." bitfld.long 0x00 16.--21. "CSLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." newline bitfld.long 0x00 8.--13. "TXLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." bitfld.long 0x00 0.--5. "RXLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." group.long 0x7C++0x03 line.long 0x00 "ROUTELOC1,I/O Routing Location Register" bitfld.long 0x00 8.--13. "RTSLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." bitfld.long 0x00 0.--5. "CTSLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,?..." tree.end repeat.end tree.end sif cpuis("EFM32GG12B410F1024")||cpuis("EFM32GG12B430F512")||cpuis("EFM32GG12B810F1024")||cpuis("EFM32GG12B830F512") tree "USB (Universal Serial Bus)" base ad:0x40022000 group.long 0x00++0x03 line.long 0x00 "CTRL,System Control Register" bitfld.long 0x00 31. "SDEN,Secondary Detection Enable" "0,1" bitfld.long 0x00 30. "PDEN,Primary Detection Enable" "0,1" newline bitfld.long 0x00 28.--29. "DCDEN,Data Contact Detection Enable" "0: DCD is disabled,?,2: Only DCD timeout will be initiated,3: Full DCD operation (physical contact and.." bitfld.long 0x00 27. "OTGPHYCTRLDIS,OTG Control Signals to PHY Disable" "0,1" newline bitfld.long 0x00 26. "OTGIDINDIS,OTG ID Input Disable" "0,1" bitfld.long 0x00 25. "OTGCLKCDIS,OTG CLKC Disable" "0,1" newline bitfld.long 0x00 12. "IDCDEN,ID Pull-up Enable" "0,1" bitfld.long 0x00 9. "LEMIDLEEN,Low Energy Mode on Bus Idle Enable" "0,1" newline bitfld.long 0x00 7. "LEMPHYCTRL,Low Energy Mode USB PHY Control" "0,1" bitfld.long 0x00 4.--5. "LEMOSCCTRL,Low Energy Mode Oscillator Control" "0: Low Energy Mode has no effect on neither USBC..,1: The USBC clock is gated when Low Energy Mode..,?..." newline bitfld.long 0x00 3. "SELFPOWERED,PHY Power" "0,1" bitfld.long 0x00 0. "VBUSENAP,VBUSEN Active Polarity" "0,1" rgroup.long 0x04++0x03 line.long 0x00 "STATUS,System Status Register" bitfld.long 0x00 15. "USBCDBUSY,USB Charger Detect Busy" "0,1" bitfld.long 0x00 13. "ACALS,ACA Low Speed TypeB Device" "0,1" newline bitfld.long 0x00 12. "ACAFS,ACA Full Speed TypeB Device" "0,1" bitfld.long 0x00 11. "DCP,Dedicated Charging Port Detected" "0,1" newline bitfld.long 0x00 10. "CDP,Charging Downstream Port Detected" "0,1" bitfld.long 0x00 9. "SDP,Standard Downstream Port Detected" "0,1" newline bitfld.long 0x00 8. "DCDTO,Data Contact Detection Timeout" "0,1" bitfld.long 0x00 2. "LEMACTIVE,Low Energy Mode Active" "0,1" newline bitfld.long 0x00 0. "VBUSDETH,VBUS Detect High" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 11. "SD,Secondary Detection Complete Interrupt Flag" "0,1" bitfld.long 0x00 10. "PD,Primary Detection Complete Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "DCD,Data Contact Detection Complete Interrupt Flag" "0,1" bitfld.long 0x00 8. "ERR,Detection Error Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "VBUSDETL,VBUS Detect Low Interrupt Flag" "0,1" bitfld.long 0x00 0. "VBUSDETH,VBUS Detect High Interrupt Flag" "0,1" wgroup.long 0x0C++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 11. "SD,Set SD Interrupt Flag" "0,1" bitfld.long 0x00 10. "PD,Set PD Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "DCD,Set DCD Interrupt Flag" "0,1" bitfld.long 0x00 8. "ERR,Set ERR Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "VBUSDETL,Set VBUSDETL Interrupt Flag" "0,1" bitfld.long 0x00 0. "VBUSDETH,Set VBUSDETH Interrupt Flag" "0,1" wgroup.long 0x10++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 11. "SD,Clear SD Interrupt Flag" "0,1" bitfld.long 0x00 10. "PD,Clear PD Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "DCD,Clear DCD Interrupt Flag" "0,1" bitfld.long 0x00 8. "ERR,Clear ERR Interrupt Flag" "0,1" newline bitfld.long 0x00 1. "VBUSDETL,Clear VBUSDETL Interrupt Flag" "0,1" bitfld.long 0x00 0. "VBUSDETH,Clear VBUSDETH Interrupt Flag" "0,1" group.long 0x14++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 11. "SD,SD Interrupt Enable" "0,1" bitfld.long 0x00 10. "PD,PD Interrupt Enable" "0,1" newline bitfld.long 0x00 9. "DCD,DCD Interrupt Enable" "0,1" bitfld.long 0x00 8. "ERR,ERR Interrupt Enable" "0,1" newline bitfld.long 0x00 1. "VBUSDETL,VBUSDETL Interrupt Enable" "0,1" bitfld.long 0x00 0. "VBUSDETH,VBUSDETH Interrupt Enable" "0,1" group.long 0x18++0x03 line.long 0x00 "ROUTE,I/O Routing Register" bitfld.long 0x00 1. "VBUSENPEN,VBUSEN Pin Enable" "0,1" bitfld.long 0x00 0. "PHYPEN,USB PHY Pin Enable" "0,1" group.long 0x2C++0x03 line.long 0x00 "CDCONF,Charger Detect Configuration Register" hexmask.long.word 0x00 0.--9. 1. "DCDTOCONF,DCD Timeout (TDCD_TIMEOUT) Configuration" wgroup.long 0x30++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 1. "STOPCD,Start Charger Detection in Progress" "0,1" bitfld.long 0x00 0. "STARTCD,Start Charger Detection Enabled" "0,1" group.long 0x34++0x03 line.long 0x00 "DATTRIM1,Data TRIM 1 Values for USB DP and DM" bitfld.long 0x00 18.--19. "TRDPFS,Trim for DP Rise Time in FS" "0,1,2,3" bitfld.long 0x00 16.--17. "TFDPFS,Trim for DP Fall Time in FS" "0,1,2,3" newline bitfld.long 0x00 14.--15. "TRDMFS,Trim for DM Rise Time in FS" "0,1,2,3" bitfld.long 0x00 12.--13. "TFDMFS,Trim for DM Fall Time in FS" "0,1,2,3" newline bitfld.long 0x00 10.--11. "VCRSFS,Trim for Falling Crossover Voltage in FS" "0,1,2,3" bitfld.long 0x00 8.--9. "DLYPULLUPFS,Trim for Rising Crossover Voltage in FS" "0,1,2,3" newline bitfld.long 0x00 7. "ENDLYPULLUP,Enables Delay of Pull in TX Mode for Both FS and LS" "0,1" bitfld.long 0x00 0.--5. "ROUT,Trim for DP and DM Output Impedance for Both FS and LS" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x3C++0x03 line.long 0x00 "LEMCTRL,USB LEM Control Register" hexmask.long.word 0x00 0.--9. 1. "TIMEBASE,Set the Number of LFC Clk Counts to Form 3ms" group.long 0x40++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 0.--5. "VBUSENPENLOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,?..." group.long 0xDE000++0x03 line.long 0x00 "GOTGCTL,OTG Control and Status Register" rbitfld.long 0x00 21. "CURMOD,Current Mode of Operation" "0,1" bitfld.long 0x00 20. "OTGVER,OTG Version" "0,1" newline rbitfld.long 0x00 19. "BSESVLD,B-Session Valid" "0,1" rbitfld.long 0x00 18. "ASESVLD,A-Session Valid" "0,1" newline rbitfld.long 0x00 17. "DBNCTIME,Long/Short Debounce Time" "0,1" rbitfld.long 0x00 16. "CONIDSTS,Connector ID Status" "0,1" newline bitfld.long 0x00 15. "DBNCEFLTRBYPASS,Debounce Filter Bypass" "0,1" bitfld.long 0x00 12. "EHEN,Embedded Host Enable" "0,1" newline bitfld.long 0x00 11. "DEVHNPEN,Device HNP Enabled" "0,1" bitfld.long 0x00 10. "HSTSETHNPEN,Host Set HNP Enable" "0,1" newline bitfld.long 0x00 9. "HNPREQ,HNP Request" "0,1" rbitfld.long 0x00 8. "HSTNEGSCS,Host Negotiation Success" "0,1" newline bitfld.long 0x00 7. "BVALIDOVVAL,B-Peripheral Session Valid OverrideValue" "0,1" bitfld.long 0x00 6. "BVALIDOVEN,B-Peripheral Session Valid Override Enable" "0,1" newline bitfld.long 0x00 5. "AVALIDOVVAL,A-Peripheral Session Valid OverrideValue" "0,1" bitfld.long 0x00 4. "AVALIDOVEN,A-Peripheral Session Valid Override Enable" "0,1" newline bitfld.long 0x00 3. "VBVALIDOVVAL,VBUS Valid OverrideValue" "0,1" bitfld.long 0x00 2. "VBVALIDOVEN,VBUS Valid Override Enable" "0,1" newline bitfld.long 0x00 1. "SESREQ,Session Request" "0,1" rbitfld.long 0x00 0. "SESREQSCS,Session Request Success" "0,1" group.long 0xDE004++0x03 line.long 0x00 "GOTGINT,OTG Interrupt Register" bitfld.long 0x00 19. "DBNCEDONE,Debounce Done" "0,1" bitfld.long 0x00 18. "ADEVTOUTCHG,A-Device Timeout Change" "0,1" newline bitfld.long 0x00 17. "HSTNEGDET,Host Negotiation Detected" "0,1" bitfld.long 0x00 9. "HSTNEGSUCSTSCHNG,Host Negotiation Success Status Change" "0,1" newline bitfld.long 0x00 8. "SESREQSUCSTSCHNG,Session Request Success Status Change" "0,1" bitfld.long 0x00 2. "SESENDDET,Session End Detected" "0,1" group.long 0xDE008++0x03 line.long 0x00 "GAHBCFG,AHB Configuration Register" bitfld.long 0x00 23. "AHBSINGLE,AHB Single Support" "0,1" bitfld.long 0x00 22. "NOTIALLDMAWRIT,Notify All Dma Write Transactions" "0,1" newline bitfld.long 0x00 21. "REMMEMSUPP,Remote Memory Support" "0,1" bitfld.long 0x00 8. "PTXFEMPLVL,Periodic TxFIFO Empty Level" "0,1" newline bitfld.long 0x00 7. "NPTXFEMPLVL,Non-Periodic TxFIFO Empty Level" "0,1" bitfld.long 0x00 5. "DMAEN,DMA Enable" "0,1" newline bitfld.long 0x00 1.--4. "HBSTLEN,Burst Length/Type" "0: Single transfer,1: Incrementing burst of unspecified length,?,3: 4-beat incrementing burst,?,5: 8-beat incrementing burst,?,7: 16-beat incrementing burst,?..." bitfld.long 0x00 0. "GLBLINTRMSK,Global Interrupt Mask" "0,1" group.long 0xDE00C++0x03 line.long 0x00 "GUSBCFG,USB Configuration Register" bitfld.long 0x00 31. "CORRUPTTXPKT,Corrupt Tx packet (host and device)" "0,1" bitfld.long 0x00 30. "FORCEDEVMODE,Force Device Mode" "0,1" newline bitfld.long 0x00 29. "FORCEHSTMODE,Force Host Mode" "0,1" bitfld.long 0x00 28. "TXENDDELAY,Tx End Delay" "0,1" newline bitfld.long 0x00 22. "TERMSELDLPULSE,TermSel DLine Pulsing Selection" "0,1" bitfld.long 0x00 10.--13. "USBTRDTIM,USB Turnaround Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 9. "HNPCAP,HNP-Capable" "0,1" bitfld.long 0x00 8. "SRPCAP,SRP-Capable" "0,1" newline bitfld.long 0x00 5. "FSINTF,Full-Speed Serial Interface Select" "0,1" bitfld.long 0x00 0.--2. "TOUTCAL,Timeout Calibration (host and device)" "0,1,2,3,4,5,6,7" group.long 0xDE010++0x03 line.long 0x00 "GRSTCTL,Reset Register" rbitfld.long 0x00 31. "AHBIDLE,AHB Master Idle" "0,1" rbitfld.long 0x00 30. "DMAREQ,DMA Request Signal" "0,1" newline bitfld.long 0x00 6.--10. "TXFNUM,TxFIFO Number (host and device)" "0: Host mode,1: Host mode,2: Device mode,3: Device mode,4: Device mode,5: Device mode,6: Device mode,?,?,?,?,?,?,?,?,?,16: Flush all the transmit FIFOs in device or..,?..." bitfld.long 0x00 5. "TXFFLSH,TxFIFO Flush" "0,1" newline bitfld.long 0x00 4. "RXFFLSH,RxFIFO Flush" "0,1" bitfld.long 0x00 2. "FRMCNTRRST,Host Frame Counter Reset" "0,1" newline bitfld.long 0x00 1. "PIUFSSFTRST,PIU FS Dedicated Controller Soft Reset" "0,1" bitfld.long 0x00 0. "CSFTRST,Core Soft Reset (host and device)" "0,1" group.long 0xDE014++0x03 line.long 0x00 "GINTSTS,Interrupt Register" bitfld.long 0x00 31. "WKUPINT,Resume/Remote Wakeup Detected Interrupt (host and device)" "0,1" bitfld.long 0x00 30. "SESSREQINT,Session Request/New Session Detected Interrupt (host and device)" "0,1" newline bitfld.long 0x00 29. "DISCONNINT,Disconnect Detected Interrupt (host only)" "0,1" bitfld.long 0x00 28. "CONIDSTSCHNG,Connector ID Status Change (host and device)" "0,1" newline rbitfld.long 0x00 26. "PTXFEMP,Periodic TxFIFO Empty (host only)" "0,1" rbitfld.long 0x00 25. "HCHINT,Host Channels Interrupt (host only)" "0,1" newline rbitfld.long 0x00 24. "PRTINT,Host Port Interrupt (host only)" "0,1" bitfld.long 0x00 23. "RESETDET,Reset detected Interrupt (device only)" "0,1" newline bitfld.long 0x00 22. "FETSUSP,Data Fetch Suspended (device only)" "0,1" bitfld.long 0x00 21. "INCOMPLP,Incomplete Periodic Transfer (device only)" "0,1" newline bitfld.long 0x00 20. "INCOMPISOIN,Incomplete Isochronous IN Transfer (device only)" "0,1" rbitfld.long 0x00 19. "OEPINT,OUT Endpoints Interrupt (device only)" "0,1" newline rbitfld.long 0x00 18. "IEPINT,IN Endpoints Interrupt (device only)" "0,1" bitfld.long 0x00 17. "EPMIS,Endpoint Mismatch Interrupt (device only)" "0,1" newline bitfld.long 0x00 15. "EOPF,End of Periodic Frame Interrupt" "0,1" bitfld.long 0x00 14. "ISOOUTDROP,Isochronous OUT Packet Dropped Interrupt (device only)" "0,1" newline bitfld.long 0x00 13. "ENUMDONE,Enumeration Done (device only)" "0,1" bitfld.long 0x00 12. "USBRST,USB Reset (device only)" "0,1" newline bitfld.long 0x00 11. "USBSUSP,USB Suspend (device only)" "0,1" bitfld.long 0x00 10. "ERLYSUSP,Early Suspend (device only)" "0,1" newline rbitfld.long 0x00 7. "GOUTNAKEFF,Global OUT NAK Effective (device only)" "0,1" rbitfld.long 0x00 6. "GINNAKEFF,Global IN Non-periodic NAK Effective (device only)" "0,1" newline rbitfld.long 0x00 5. "NPTXFEMP,Non-Periodic TxFIFO Empty (host only)" "0,1" rbitfld.long 0x00 4. "RXFLVL,RxFIFO Non-Empty (host and device)" "0,1" newline bitfld.long 0x00 3. "SOF,Start of Frame (host and device)" "0,1" rbitfld.long 0x00 2. "OTGINT,OTG Interrupt (host and device)" "0,1" newline bitfld.long 0x00 1. "MODEMIS,Mode Mismatch Interrupt (host and device)" "0,1" rbitfld.long 0x00 0. "CURMOD,Current Mode of Operation (host and device)" "0,1" group.long 0xDE018++0x03 line.long 0x00 "GINTMSK,Interrupt Mask Register" bitfld.long 0x00 31. "WKUPINTMSK,Resume/Remote Wakeup Detected Interrupt Mask (host and device)" "0,1" bitfld.long 0x00 30. "SESSREQINTMSK,Session Request/New Session Detected Interrupt Mask (host and device)" "0,1" newline bitfld.long 0x00 29. "DISCONNINTMSK,Disconnect Detected Interrupt Mask (host and device)" "0,1" bitfld.long 0x00 28. "CONIDSTSCHNGMSK,Connector ID Status Change Mask (host and device)" "0,1" newline bitfld.long 0x00 26. "PTXFEMPMSK,Periodic TxFIFO Empty Mask (host only)" "0,1" bitfld.long 0x00 25. "HCHINTMSK,Host Channels Interrupt Mask (host only)" "0,1" newline bitfld.long 0x00 24. "PRTINTMSK,Host Port Interrupt Mask (host only)" "0,1" bitfld.long 0x00 23. "RESETDETMSK,Reset detected Interrupt Mask (device only)" "0,1" newline bitfld.long 0x00 22. "FETSUSPMSK,Data Fetch Suspended Mask (device only)" "0,1" bitfld.long 0x00 21. "INCOMPLPMSK,Incomplete Periodic Transfer Mask (host only)" "0,1" newline bitfld.long 0x00 20. "INCOMPISOINMSK,Incomplete Isochronous IN Transfer Mask (device only)" "0,1" bitfld.long 0x00 19. "OEPINTMSK,OUT Endpoints Interrupt Mask (device only)" "0,1" newline bitfld.long 0x00 18. "IEPINTMSK,IN Endpoints Interrupt Mask (device only)" "0,1" bitfld.long 0x00 17. "EPMISMSK,Endpoint Mismatch Interrupt Mask (device only)" "0,1" newline bitfld.long 0x00 15. "EOPFMSK,End of Periodic Frame Interrupt Mask (device only)" "0,1" bitfld.long 0x00 14. "ISOOUTDROPMSK,Isochronous OUT Packet Dropped Interrupt Mask (device only)" "0,1" newline bitfld.long 0x00 13. "ENUMDONEMSK,Enumeration Done Mask (device only)" "0,1" bitfld.long 0x00 12. "USBRSTMSK,USB Reset Mask (device only)" "0,1" newline bitfld.long 0x00 11. "USBSUSPMSK,USB Suspend Mask (device only)" "0,1" bitfld.long 0x00 10. "ERLYSUSPMSK,Early Suspend Mask (device only)" "0,1" newline bitfld.long 0x00 7. "GOUTNAKEFFMSK,Global OUT NAK Effective Mask (device only)" "0,1" bitfld.long 0x00 6. "GINNAKEFFMSK,Global Non-periodic IN NAK Effective Mask (device only)" "0,1" newline bitfld.long 0x00 5. "NPTXFEMPMSK,Non-Periodic TxFIFO Empty Mask (host only)" "0,1" bitfld.long 0x00 4. "RXFLVLMSK,Receive FIFO Non-Empty Mask (host and device)" "0,1" newline bitfld.long 0x00 3. "SOFMSK,Start of Frame Mask (host and device)" "0,1" bitfld.long 0x00 2. "OTGINTMSK,OTG Interrupt Mask (host and device)" "0,1" newline bitfld.long 0x00 1. "MODEMISMSK,Mode Mismatch Interrupt Mask (host and device)" "0,1" rgroup.long 0xDE01C++0x03 line.long 0x00 "GRXSTSR,Receive Status Debug Read Register" bitfld.long 0x00 21.--24. "FN,Frame Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 17.--20. "PKTSTS,Packet Status" "?,1: Device mode,2: Host mode,3: Host mode,4: Device mode,5: Host mode,6: Device mode,7: Host mode,?..." newline bitfld.long 0x00 15.--16. "DPID,Data PID" "0: DATA0 PID,1: DATA1 PID,2: DATA2 PID,3: MDATA PID" hexmask.long.word 0x00 4.--14. 1. "BCNT,Byte Count" newline bitfld.long 0x00 0.--3. "CHNUM,Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xDE020++0x03 line.long 0x00 "GRXSTSP,Receive Status Read /Pop Register" bitfld.long 0x00 21.--24. "FN,Frame Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 17.--20. "PKTSTS,Packet Status (host or device)" "?,1: Device mode,2: Host mode,3: Host mode,4: Device mode,5: Host mode,6: Device mode,7: Host mode,?..." newline bitfld.long 0x00 15.--16. "DPID,Data PID (host or device)" "0: DATA0 PID,1: DATA1 PID,2: DATA2 PID,3: MDATA PID" hexmask.long.word 0x00 4.--14. 1. "BCNT,Byte Count" newline bitfld.long 0x00 0.--3. "CHNUM,Channel Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xDE024++0x03 line.long 0x00 "GRXFSIZ,Receive FIFO Size Register" hexmask.long.word 0x00 0.--9. 1. "RXFDEP,RxFIFO Depth" group.long 0xDE028++0x03 line.long 0x00 "GNPTXFSIZ,Non-periodic Transmit FIFO Size Register" hexmask.long.word 0x00 16.--31. 1. "NPTXFINEPTXF0DEP,Non-periodic TxFIFO Depth (host only) / IN Endpoint TxFIFO 0 Depth (device only)" hexmask.long.word 0x00 0.--15. 1. "NPTXFSTADDR,Non-periodic Transmit RAM Start Address" rgroup.long 0xDE02C++0x03 line.long 0x00 "GNPTXSTS,Non-periodic Transmit FIFO/Queue Status Register" hexmask.long.byte 0x00 24.--30. 1. "NPTXQTOP,Top of the Non-periodic Transmit Request Queue" hexmask.long.byte 0x00 16.--23. 1. "NPTXQSPCAVAIL,Non-periodic Transmit Request Queue Space Available" newline hexmask.long.word 0x00 0.--15. 1. "NPTXFSPCAVAIL,Non-periodic TxFIFO Space Avail" rgroup.long 0xDE040++0x03 line.long 0x00 "GSNPSID,Synopsys ID Register" hexmask.long 0x00 0.--31. 1. "SYNOPSYSID," group.long 0xDE05C++0x03 line.long 0x00 "GDFIFOCFG,Global DFIFO Configuration Register" hexmask.long.word 0x00 16.--31. 1. "EPINFOBASEADDR," hexmask.long.word 0x00 0.--15. 1. "GDFIFOCFG," group.long 0xDE100++0x03 line.long 0x00 "HPTXFSIZ,Host Periodic Transmit FIFO Size Register" hexmask.long.word 0x00 16.--25. 1. "PTXFSIZE,Host Periodic TxFIFO Depth" hexmask.long.word 0x00 0.--10. 1. "PTXFSTADDR,Host Periodic TxFIFO Start Address" repeat 2. (strings "1" "2" )(list 0x00 0x04 ) group.long ($2+0xDE104)++0x03 line.long 0x00 "DIEPTXF$1,Device IN Endpoint Transmit FIFO Size Register $1" hexmask.long.word 0x00 16.--25. 1. "INEPNTXFDEP,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--10. 1. "INEPNTXFSTADDR,IN Endpoint FIFOn Transmit RAM Start Address" repeat.end repeat 4. (strings "3" "4" "5" "6" )(list 0x00 0x04 0x08 0x0C ) group.long ($2+0xDE10C)++0x03 line.long 0x00 "DIEPTXF$1,Device IN Endpoint Transmit FIFO Size Register $1" hexmask.long.word 0x00 16.--25. 1. "INEPNTXFDEP,IN Endpoint TxFIFO Depth" hexmask.long.word 0x00 0.--11. 1. "INEPNTXFSTADDR,IN Endpoint FIFOn Transmit RAM Start Address" repeat.end group.long 0xDE400++0x03 line.long 0x00 "HCFG,Host Configuration Register" bitfld.long 0x00 31. "MODECHTIMEN,Mode Change Time" "0,1" hexmask.long.byte 0x00 8.--15. 1. "RESVALID,Resume Validation Period" newline bitfld.long 0x00 7. "ENA32KHZS,Enable 32 kHz Suspend Mode" "0,1" bitfld.long 0x00 2. "FSLSSUPP,FS- and LS-Only Support" "0,1" newline bitfld.long 0x00 0.--1. "FSLSPCLKSEL,FS/LS PHY Clock Select" "?,1: Internal PHY clock is running at 48 MHz..,2: Internal PHY clock is running at 6 MHz (48..,?..." group.long 0xDE404++0x03 line.long 0x00 "HFIR,Host Frame Interval Register" bitfld.long 0x00 16. "HFIRRLDCTRL,Reload Control" "0,1" hexmask.long.word 0x00 0.--15. 1. "FRINT,Frame Interval" rgroup.long 0xDE408++0x03 line.long 0x00 "HFNUM,Host Frame Number/Frame Time Remaining Register" hexmask.long.word 0x00 16.--31. 1. "FRREM,Frame Time Remaining" hexmask.long.word 0x00 0.--15. 1. "FRNUM,Frame Number" rgroup.long 0xDE410++0x03 line.long 0x00 "HPTXSTS,Host Periodic Transmit FIFO/Queue Status Register" hexmask.long.byte 0x00 24.--31. 1. "PTXQTOP,Top of the Periodic Transmit Request Queue" hexmask.long.byte 0x00 16.--23. 1. "PTXQSPCAVAIL,Periodic Transmit Request Queue Space Available" newline hexmask.long.word 0x00 0.--15. 1. "PTXFSPCAVAIL,Periodic Transmit Data FIFO Space Available" rgroup.long 0xDE414++0x03 line.long 0x00 "HAINT,Host All Channels Interrupt Register" hexmask.long.word 0x00 0.--13. 1. "HAINT,Channel Interrupt for channel" group.long 0xDE418++0x03 line.long 0x00 "HAINTMSK,Host All Channels Interrupt Mask Register" hexmask.long.word 0x00 0.--13. 1. "HAINTMSK,Channel Interrupt Mask for channel" group.long 0xDE440++0x03 line.long 0x00 "HPRT,Host Port Control and Status Register" rbitfld.long 0x00 17.--18. "PRTSPD,Port Speed" "?,1: Full speed,2: Low speed,?..." bitfld.long 0x00 13.--16. "PRTTSTCTL,Port Test Control" "0: Test mode disabled,1: Test_J mode,2: Test_K mode,3: Test_SE0_NAK mode,4: Test_Packet mode,5: Test_Force_Enable,?..." newline bitfld.long 0x00 12. "PRTPWR,Port Power" "0,1" rbitfld.long 0x00 10.--11. "PRTLNSTS,Port Line Status" "0,1,2,3" newline bitfld.long 0x00 8. "PRTRST,Port Reset" "0,1" bitfld.long 0x00 7. "PRTSUSP,Port Suspend" "0,1" newline bitfld.long 0x00 6. "PRTRES,Port Resume" "0,1" bitfld.long 0x00 5. "PRTOVRCURRCHNG,Port Overcurrent Change" "0,1" newline rbitfld.long 0x00 4. "PRTOVRCURRACT,Port Overcurrent Active" "0,1" bitfld.long 0x00 3. "PRTENCHNG,Port Enable/Disable Change" "0,1" newline bitfld.long 0x00 2. "PRTENA,Port Enable" "0,1" bitfld.long 0x00 1. "PRTCONNDET,Port Connect Detected" "0,1" newline rbitfld.long 0x00 0. "PRTCONNSTS,Port Connect Status" "0,1" group.long 0xDE500++0x03 line.long 0x00 "HC0_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE504++0x03 line.long 0x00 "HC0_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE508++0x03 line.long 0x00 "HC0_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE50C++0x03 line.long 0x00 "HC0_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE510++0x03 line.long 0x00 "HC0_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE514++0x03 line.long 0x00 "HC0_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE520++0x03 line.long 0x00 "HC1_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE524++0x03 line.long 0x00 "HC1_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE528++0x03 line.long 0x00 "HC1_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE52C++0x03 line.long 0x00 "HC1_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE530++0x03 line.long 0x00 "HC1_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE534++0x03 line.long 0x00 "HC1_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE540++0x03 line.long 0x00 "HC2_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE544++0x03 line.long 0x00 "HC2_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE548++0x03 line.long 0x00 "HC2_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE54C++0x03 line.long 0x00 "HC2_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE550++0x03 line.long 0x00 "HC2_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE554++0x03 line.long 0x00 "HC2_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE560++0x03 line.long 0x00 "HC3_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE564++0x03 line.long 0x00 "HC3_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE568++0x03 line.long 0x00 "HC3_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE56C++0x03 line.long 0x00 "HC3_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE570++0x03 line.long 0x00 "HC3_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE574++0x03 line.long 0x00 "HC3_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE580++0x03 line.long 0x00 "HC4_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE584++0x03 line.long 0x00 "HC4_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE588++0x03 line.long 0x00 "HC4_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE58C++0x03 line.long 0x00 "HC4_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE590++0x03 line.long 0x00 "HC4_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE594++0x03 line.long 0x00 "HC4_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE5A0++0x03 line.long 0x00 "HC5_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE5A4++0x03 line.long 0x00 "HC5_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE5A8++0x03 line.long 0x00 "HC5_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE5AC++0x03 line.long 0x00 "HC5_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE5B0++0x03 line.long 0x00 "HC5_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE5B4++0x03 line.long 0x00 "HC5_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE5C0++0x03 line.long 0x00 "HC6_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE5C4++0x03 line.long 0x00 "HC6_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE5C8++0x03 line.long 0x00 "HC6_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE5CC++0x03 line.long 0x00 "HC6_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE5D0++0x03 line.long 0x00 "HC6_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE5D4++0x03 line.long 0x00 "HC6_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE5E0++0x03 line.long 0x00 "HC7_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE5E4++0x03 line.long 0x00 "HC7_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE5E8++0x03 line.long 0x00 "HC7_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE5EC++0x03 line.long 0x00 "HC7_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE5F0++0x03 line.long 0x00 "HC7_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE5F4++0x03 line.long 0x00 "HC7_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE600++0x03 line.long 0x00 "HC8_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE604++0x03 line.long 0x00 "HC8_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE608++0x03 line.long 0x00 "HC8_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE60C++0x03 line.long 0x00 "HC8_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE610++0x03 line.long 0x00 "HC8_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE614++0x03 line.long 0x00 "HC8_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE620++0x03 line.long 0x00 "HC9_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE624++0x03 line.long 0x00 "HC9_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE628++0x03 line.long 0x00 "HC9_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE62C++0x03 line.long 0x00 "HC9_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE630++0x03 line.long 0x00 "HC9_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE634++0x03 line.long 0x00 "HC9_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE640++0x03 line.long 0x00 "HC10_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE644++0x03 line.long 0x00 "HC10_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE648++0x03 line.long 0x00 "HC10_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE64C++0x03 line.long 0x00 "HC10_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE650++0x03 line.long 0x00 "HC10_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE654++0x03 line.long 0x00 "HC10_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE660++0x03 line.long 0x00 "HC11_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE664++0x03 line.long 0x00 "HC11_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE668++0x03 line.long 0x00 "HC11_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE66C++0x03 line.long 0x00 "HC11_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE670++0x03 line.long 0x00 "HC11_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE674++0x03 line.long 0x00 "HC11_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE680++0x03 line.long 0x00 "HC12_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE684++0x03 line.long 0x00 "HC12_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE688++0x03 line.long 0x00 "HC12_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE68C++0x03 line.long 0x00 "HC12_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE690++0x03 line.long 0x00 "HC12_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE694++0x03 line.long 0x00 "HC12_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE6A0++0x03 line.long 0x00 "HC13_CHAR,Host Channel x Characteristics Register" bitfld.long 0x00 31. "CHENA,Channel Enable" "0,1" bitfld.long 0x00 30. "CHDIS,Channel Disable" "0,1" newline bitfld.long 0x00 29. "ODDFRM,Odd Frame" "0,1" hexmask.long.byte 0x00 22.--28. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 20.--21. "MC,Multi Count (MC) / Error Count" "0,1,2,3" bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control endpoint,1: Isochronous endpoint,2: Bulk endpoint,3: Interrupt endpoint" newline bitfld.long 0x00 17. "LSPDDEV,Low-Speed Device" "0,1" bitfld.long 0x00 15. "EPDIR,Endpoint Direction" "0,1" newline bitfld.long 0x00 11.--14. "EPNUM,Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE6A4++0x03 line.long 0x00 "HC13_SPLT,Host Channel x Split Control Register" bitfld.long 0x00 31. "SPLTENA,Split Enable" "0,1" bitfld.long 0x00 16. "COMPSPLT,Do Complete Split" "0,1" newline bitfld.long 0x00 14.--15. "XACTPOS,Transaction Position" "0,1,2,3" hexmask.long.byte 0x00 7.--13. 1. "HUBADDR,Hub Address" newline hexmask.long.byte 0x00 0.--6. 1. "PRTADDR,Port Address" group.long 0xDE6A8++0x03 line.long 0x00 "HC13_INT,Host Channel x Interrupt Register" bitfld.long 0x00 10. "DATATGLERR,Data Toggle Error" "0,1" bitfld.long 0x00 9. "FRMOVRUN,Frame Overrun" "0,1" newline bitfld.long 0x00 8. "BBLERR,Babble Error" "0,1" bitfld.long 0x00 7. "XACTERR,Transaction Error" "0,1" newline bitfld.long 0x00 5. "ACK,ACK Response Received/Transmitted Interrupt" "0,1" bitfld.long 0x00 4. "NAK,NAK Response Received Interrupt" "0,1" newline bitfld.long 0x00 3. "STALL,STALL Response Received Interrupt" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "CHHLTD,Channel Halted" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed" "0,1" group.long 0xDE6AC++0x03 line.long 0x00 "HC13_INTMSK,Host Channel x Interrupt Mask Register" bitfld.long 0x00 10. "DATATGLERRMSK,Data Toggle Error Mask" "0,1" bitfld.long 0x00 9. "FRMOVRUNMSK,Frame Overrun Mask" "0,1" newline bitfld.long 0x00 8. "BBLERRMSK,Babble Error Mask" "0,1" bitfld.long 0x00 7. "XACTERRMSK,Transaction Error Mask" "0,1" newline bitfld.long 0x00 5. "ACKMSK,ACK Response Received/Transmitted Interrupt Mask" "0,1" bitfld.long 0x00 4. "NAKMSK,NAK Response Received Interrupt Mask" "0,1" newline bitfld.long 0x00 3. "STALLMSK,STALL Response Received Interrupt Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" newline bitfld.long 0x00 1. "CHHLTDMSK,Channel Halted Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Mask" "0,1" group.long 0xDE6B0++0x03 line.long 0x00 "HC13_TSIZ,Host Channel x Transfer Size Register" bitfld.long 0x00 29.--30. "PID,The Application Programs This Field With the Type of" "0: DATA0 PID,1: DATA2 PID,2: DATA1 PID,3: MDATA (non-control) / SETUP (control) PID" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE6B4++0x03 line.long 0x00 "HC13_DMAADDR,Host Channel x DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR,DMA Address" group.long 0xDE800++0x03 line.long 0x00 "DCFG,Device Configuration Register" bitfld.long 0x00 26.--31. "RESVALID,Resume Validation Period" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. "ERRATICINTMSK," "0,1" newline bitfld.long 0x00 14. "XCVRDLY," "0,1" bitfld.long 0x00 13. "ENDEVOUTNAK,Enable Device OUT NAK" "0,1" newline bitfld.long 0x00 11.--12. "PERFRINT,Periodic Frame Interval" "0: 80% of the frame interval,1: 85% of the frame interval,2: 90% of the frame interval,3: 95% of the frame interval" hexmask.long.byte 0x00 4.--10. 1. "DEVADDR,Device Address" newline bitfld.long 0x00 3. "ENA32KHZSUSP,Enable 32 kHz Suspend Mode" "0,1" bitfld.long 0x00 2. "NZSTSOUTHSHK,Non-Zero-Length Status OUT Handshake" "0,1" newline bitfld.long 0x00 0.--1. "DEVSPD,Device Speed" "?,?,2: Low speed (PHY clock is 6 MHz),3: Full speed (PHY clock is 48 MHz)" group.long 0xDE804++0x03 line.long 0x00 "DCTL,Device Control Register" bitfld.long 0x00 16. "NAKONBBLE,NAK on Babble Error" "0,1" bitfld.long 0x00 15. "IGNRFRMNUM,Ignore Frame number For Isochronous End points" "0,1" newline bitfld.long 0x00 11. "PWRONPRGDONE,Power-On Programming Done" "0,1" bitfld.long 0x00 10. "CGOUTNAK,Clear Global OUT NAK" "0,1" newline bitfld.long 0x00 9. "SGOUTNAK,Set Global OUT NAK" "0,1" bitfld.long 0x00 8. "CGNPINNAK,Clear Global Non-periodic IN NAK" "0,1" newline bitfld.long 0x00 7. "SGNPINNAK,Set Global Non-periodic IN NAK" "0,1" bitfld.long 0x00 4.--6. "TSTCTL,Test Control" "0: Test mode disabled,1: Test_J mode,2: Test_K mode,3: Test_SE0_NAK mode,4: Test_Packet mode,5: Test_Force_Enable,?..." newline rbitfld.long 0x00 3. "GOUTNAKSTS,Global OUT NAK Status" "0,1" rbitfld.long 0x00 2. "GNPINNAKSTS,Global Non-periodic IN NAK Status" "0,1" newline bitfld.long 0x00 1. "SFTDISCON,Soft Disconnect" "0,1" bitfld.long 0x00 0. "RMTWKUPSIG,Remote Wakeup Signaling" "0,1" rgroup.long 0xDE808++0x03 line.long 0x00 "DSTS,Device Status Register" bitfld.long 0x00 22.--23. "DEVLNSTS,Device Line Status" "0,1,2,3" hexmask.long.word 0x00 8.--21. 1. "SOFFN,Frame Number of the Received SOF" newline bitfld.long 0x00 3. "ERRTICERR,Erratic Error" "0,1" bitfld.long 0x00 1.--2. "ENUMSPD,Enumerated Speed" "?,?,2: Low speed (PHY clock is running at 6 MHz),3: Full speed (PHY clock is running at 48 MHz)" newline bitfld.long 0x00 0. "SUSPSTS,Suspend Status" "0,1" group.long 0xDE810++0x03 line.long 0x00 "DIEPMSK,Device IN Endpoint Common Interrupt Mask Register" bitfld.long 0x00 13. "NAKMSK,NAK interrupt Mask" "0,1" bitfld.long 0x00 8. "TXFIFOUNDRNMSK,Fifo Underrun Mask" "0,1" newline bitfld.long 0x00 6. "INEPNAKEFFMSK,IN Endpoint NAK Effective Mask" "0,1" bitfld.long 0x00 5. "INTKNEPMISMSK,IN Token received with EP Mismatch Mask" "0,1" newline bitfld.long 0x00 4. "INTKNTXFEMPMSK,IN Token Received When TxFIFO Empty Mask" "0,1" bitfld.long 0x00 3. "TIMEOUTMSK,Timeout Condition Mask" "0,1" newline bitfld.long 0x00 2. "AHBERRMSK,AHB Error Mask" "0,1" bitfld.long 0x00 1. "EPDISBLDMSK,Endpoint Disabled Interrupt Mask" "0,1" newline bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Interrupt Mask" "0,1" group.long 0xDE814++0x03 line.long 0x00 "DOEPMSK,Device OUT Endpoint Common Interrupt Mask Register" bitfld.long 0x00 13. "NAKMSK,NAK interrupt Mask" "0,1" bitfld.long 0x00 12. "BBLEERRMSK,Babble Error interrupt Mask" "0,1" newline bitfld.long 0x00 8. "OUTPKTERRMSK,OUT Packet Error Mask" "0,1" bitfld.long 0x00 6. "BACK2BACKSETUP,Back-to-Back SETUP Packets Received Mask" "0,1" newline bitfld.long 0x00 5. "STSPHSERCVDMSK,Status Phase Received Mask" "0,1" bitfld.long 0x00 4. "OUTTKNEPDISMSK,OUT Token Received when Endpoint Disabled Mask" "0,1" newline bitfld.long 0x00 3. "SETUPMSK,SETUP Phase Done Mask" "0,1" bitfld.long 0x00 2. "AHBERRMSK,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLDMSK,Endpoint Disabled Interrupt Mask" "0,1" bitfld.long 0x00 0. "XFERCOMPLMSK,Transfer Completed Interrupt Mask" "0,1" rgroup.long 0xDE818++0x03 line.long 0x00 "DAINT,Device All Endpoints Interrupt Register" bitfld.long 0x00 22. "OUTEPINT6,OUT Endpoint 6 Interrupt Bit" "0,1" bitfld.long 0x00 21. "OUTEPINT5,OUT Endpoint 5 Interrupt Bit" "0,1" newline bitfld.long 0x00 20. "OUTEPINT4,OUT Endpoint 4 Interrupt Bit" "0,1" bitfld.long 0x00 19. "OUTEPINT3,OUT Endpoint 3 Interrupt Bit" "0,1" newline bitfld.long 0x00 18. "OUTEPINT2,OUT Endpoint 2 Interrupt Bit" "0,1" bitfld.long 0x00 17. "OUTEPINT1,OUT Endpoint 1 Interrupt Bit" "0,1" newline bitfld.long 0x00 16. "OUTEPINT0,OUT Endpoint 0 Interrupt Bit" "0,1" bitfld.long 0x00 6. "INEPINT6,IN Endpoint 6 Interrupt Bit" "0,1" newline bitfld.long 0x00 5. "INEPINT5,IN Endpoint 5 Interrupt Bit" "0,1" bitfld.long 0x00 4. "INEPINT4,IN Endpoint 4 Interrupt Bit" "0,1" newline bitfld.long 0x00 3. "INEPINT3,IN Endpoint 3 Interrupt Bit" "0,1" bitfld.long 0x00 2. "INEPINT2,IN Endpoint 2 Interrupt Bit" "0,1" newline bitfld.long 0x00 1. "INEPINT1,IN Endpoint 1 Interrupt Bit" "0,1" bitfld.long 0x00 0. "INEPINT0,IN Endpoint 0 Interrupt Bit" "0,1" group.long 0xDE81C++0x03 line.long 0x00 "DAINTMSK,Device All Endpoints Interrupt Mask Register" bitfld.long 0x00 22. "OUTEPMSK6,OUT Endpoint 6 Interrupt mask Bit" "0,1" bitfld.long 0x00 21. "OUTEPMSK5,OUT Endpoint 5 Interrupt mask Bit" "0,1" newline bitfld.long 0x00 20. "OUTEPMSK4,OUT Endpoint 4 Interrupt mask Bit" "0,1" bitfld.long 0x00 19. "OUTEPMSK3,OUT Endpoint 3 Interrupt mask Bit" "0,1" newline bitfld.long 0x00 18. "OUTEPMSK2,OUT Endpoint 2 Interrupt mask Bit" "0,1" bitfld.long 0x00 17. "OUTEPMSK1,OUT Endpoint 1 Interrupt mask Bit" "0,1" newline bitfld.long 0x00 16. "OUTEPMSK0,OUT Endpoint 0 Interrupt mask Bit" "0,1" bitfld.long 0x00 6. "INEPMSK6,IN Endpoint 6 Interrupt mask Bit" "0,1" newline bitfld.long 0x00 5. "INEPMSK5,IN Endpoint 5 Interrupt mask Bit" "0,1" bitfld.long 0x00 4. "INEPMSK4,IN Endpoint 4 Interrupt mask Bit" "0,1" newline bitfld.long 0x00 3. "INEPMSK3,IN Endpoint 3 Interrupt mask Bit" "0,1" bitfld.long 0x00 2. "INEPMSK2,IN Endpoint 2 Interrupt mask Bit" "0,1" newline bitfld.long 0x00 1. "INEPMSK1,IN Endpoint 1 Interrupt mask Bit" "0,1" bitfld.long 0x00 0. "INEPMSK0,IN Endpoint 0 Interrupt mask Bit" "0,1" group.long 0xDE828++0x03 line.long 0x00 "DVBUSDIS,Device VBUS Discharge Time Register" hexmask.long.word 0x00 0.--15. 1. "DVBUSDIS,Device VBUS Discharge Time" group.long 0xDE82C++0x03 line.long 0x00 "DVBUSPULSE,Device VBUS Pulsing Time Register" hexmask.long.word 0x00 0.--11. 1. "DVBUSPULSE,Device VBUS Pulsing Time" group.long 0xDE830++0x03 line.long 0x00 "DTHRCTL,Device Threshold Control Register" bitfld.long 0x00 27. "ARBPRKEN,Arbiter Parking Enable" "0,1" hexmask.long.word 0x00 17.--25. 1. "RXTHRLEN,Receive Threshold Length" newline bitfld.long 0x00 16. "RXTHREN,Receive Threshold Enable" "0,1" bitfld.long 0x00 11.--12. "AHBTHRRATIO,AHB Threshold Ratio" "0: AHB threshold = MAC threshold,1: AHB threshold = MAC threshold / 2,2: AHB threshold = MAC threshold / 4,3: AHB threshold = MAC threshold / 8" newline hexmask.long.word 0x00 2.--10. 1. "TXTHRLEN,Transmit Threshold Length" bitfld.long 0x00 1. "ISOTHREN,ISO IN Endpoints Threshold Enable" "0,1" newline bitfld.long 0x00 0. "NONISOTHREN,Non-ISO IN Endpoints Threshold Enable" "0,1" group.long 0xDE834++0x03 line.long 0x00 "DIEPEMPMSK,Device IN Endpoint FIFO Empty Interrupt Mask Register" hexmask.long.word 0x00 0.--15. 1. "INEPTXFEMPMSK,IN EP Tx FIFO Empty Interrupt Mask Bits" group.long 0xDE900++0x03 line.long 0x00 "DIEP0CTL,Device Control IN Endpoint 0 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 22.--25. "TXFNUM,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21. "STALL,Handshake" "0,1" newline rbitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0,1,2,3" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" bitfld.long 0x00 0.--1. "MPS,Maximum Packet Size" "0: 64 bytes,1: 32 bytes,2: 16 bytes,3: 8 bytes" group.long 0xDE908++0x03 line.long 0x00 "DIEP0INT,Device IN Endpoint 0 Interrupt Register" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" bitfld.long 0x00 12. "BBLEERR,Babble Interrupt" "0,1" newline bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" bitfld.long 0x00 8. "TXFIFOUNDRN,Fifo Underrun" "0,1" newline rbitfld.long 0x00 7. "TXFEMP,Transmit FIFO Empty" "0,1" bitfld.long 0x00 6. "INEPNAKEFF,IN Endpoint NAK Effective" "0,1" newline bitfld.long 0x00 5. "INTKNEPMIS,IN Token Received with EP Mismatch" "0,1" bitfld.long 0x00 4. "INTKNTXFEMP,IN Token Received When TxFIFO is Empty" "0,1" newline bitfld.long 0x00 3. "TIMEOUT,Timeout Condition" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDE910++0x03 line.long 0x00 "DIEP0TSIZ,Device IN Endpoint 0 Transfer Size Register" bitfld.long 0x00 19.--20. "PKTCNT,Packet Count" "0,1,2,3" hexmask.long.byte 0x00 0.--6. 1. "XFERSIZE,Transfer Size" group.long 0xDE914++0x03 line.long 0x00 "DIEP0DMAADDR,Device IN Endpoint 0 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," rgroup.long 0xDE918++0x03 line.long 0x00 "DIEP0TXFSTS,Device IN Endpoint Transmit FIFO Status Register 0" hexmask.long.word 0x00 0.--15. 1. "SPCAVAIL,IN Endpoint TxFIFO Space Avail" group.long 0xDE920++0x03 line.long 0x00 "DIEP0_CTL,Device Control IN Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 22.--25. "TXFNUM,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21. "STALL,Handshake" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even or Odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE928++0x03 line.long 0x00 "DIEP0_INT,Device IN Endpoint x+1 Interrupt Register" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" bitfld.long 0x00 12. "BBLEERR,Babble Interrupt" "0,1" newline bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" bitfld.long 0x00 8. "TXFIFOUNDRN,Fifo Underrun" "0,1" newline rbitfld.long 0x00 7. "TXFEMP,Transmit FIFO Empty" "0,1" bitfld.long 0x00 6. "INEPNAKEFF,IN Endpoint NAK Effective" "0,1" newline bitfld.long 0x00 5. "INTKNEPMIS,IN Token Received with EP Mismatch" "0,1" bitfld.long 0x00 4. "INTKNTXFEMP,IN Token Received When TxFIFO is Empty" "0,1" newline bitfld.long 0x00 3. "TIMEOUT,Timeout Condition" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDE930++0x03 line.long 0x00 "DIEP0_TSIZ,Device IN Endpoint x+1 Transfer Size Register" bitfld.long 0x00 29.--30. "MC,Multi Count" "0,1,2,3" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE934++0x03 line.long 0x00 "DIEP0_DMAADDR,Device IN Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," rgroup.long 0xDE938++0x03 line.long 0x00 "DIEP0_DTXFSTS,Device IN Endpoint Transmit FIFO Status Register 1" hexmask.long.word 0x00 0.--15. 1. "SPCAVAIL,IN Endpoint TxFIFO Space Avail" group.long 0xDE940++0x03 line.long 0x00 "DIEP1_CTL,Device Control IN Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 22.--25. "TXFNUM,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21. "STALL,Handshake" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even or Odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE948++0x03 line.long 0x00 "DIEP1_INT,Device IN Endpoint x+1 Interrupt Register" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" bitfld.long 0x00 12. "BBLEERR,Babble Interrupt" "0,1" newline bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" bitfld.long 0x00 8. "TXFIFOUNDRN,Fifo Underrun" "0,1" newline rbitfld.long 0x00 7. "TXFEMP,Transmit FIFO Empty" "0,1" bitfld.long 0x00 6. "INEPNAKEFF,IN Endpoint NAK Effective" "0,1" newline bitfld.long 0x00 5. "INTKNEPMIS,IN Token Received with EP Mismatch" "0,1" bitfld.long 0x00 4. "INTKNTXFEMP,IN Token Received When TxFIFO is Empty" "0,1" newline bitfld.long 0x00 3. "TIMEOUT,Timeout Condition" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDE950++0x03 line.long 0x00 "DIEP1_TSIZ,Device IN Endpoint x+1 Transfer Size Register" bitfld.long 0x00 29.--30. "MC,Multi Count" "0,1,2,3" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE954++0x03 line.long 0x00 "DIEP1_DMAADDR,Device IN Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," rgroup.long 0xDE958++0x03 line.long 0x00 "DIEP1_DTXFSTS,Device IN Endpoint Transmit FIFO Status Register 1" hexmask.long.word 0x00 0.--15. 1. "SPCAVAIL,IN Endpoint TxFIFO Space Avail" group.long 0xDE960++0x03 line.long 0x00 "DIEP2_CTL,Device Control IN Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 22.--25. "TXFNUM,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21. "STALL,Handshake" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even or Odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE968++0x03 line.long 0x00 "DIEP2_INT,Device IN Endpoint x+1 Interrupt Register" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" bitfld.long 0x00 12. "BBLEERR,Babble Interrupt" "0,1" newline bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" bitfld.long 0x00 8. "TXFIFOUNDRN,Fifo Underrun" "0,1" newline rbitfld.long 0x00 7. "TXFEMP,Transmit FIFO Empty" "0,1" bitfld.long 0x00 6. "INEPNAKEFF,IN Endpoint NAK Effective" "0,1" newline bitfld.long 0x00 5. "INTKNEPMIS,IN Token Received with EP Mismatch" "0,1" bitfld.long 0x00 4. "INTKNTXFEMP,IN Token Received When TxFIFO is Empty" "0,1" newline bitfld.long 0x00 3. "TIMEOUT,Timeout Condition" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDE970++0x03 line.long 0x00 "DIEP2_TSIZ,Device IN Endpoint x+1 Transfer Size Register" bitfld.long 0x00 29.--30. "MC,Multi Count" "0,1,2,3" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE974++0x03 line.long 0x00 "DIEP2_DMAADDR,Device IN Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," rgroup.long 0xDE978++0x03 line.long 0x00 "DIEP2_DTXFSTS,Device IN Endpoint Transmit FIFO Status Register 1" hexmask.long.word 0x00 0.--15. 1. "SPCAVAIL,IN Endpoint TxFIFO Space Avail" group.long 0xDE980++0x03 line.long 0x00 "DIEP3_CTL,Device Control IN Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 22.--25. "TXFNUM,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21. "STALL,Handshake" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even or Odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE988++0x03 line.long 0x00 "DIEP3_INT,Device IN Endpoint x+1 Interrupt Register" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" bitfld.long 0x00 12. "BBLEERR,Babble Interrupt" "0,1" newline bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" bitfld.long 0x00 8. "TXFIFOUNDRN,Fifo Underrun" "0,1" newline rbitfld.long 0x00 7. "TXFEMP,Transmit FIFO Empty" "0,1" bitfld.long 0x00 6. "INEPNAKEFF,IN Endpoint NAK Effective" "0,1" newline bitfld.long 0x00 5. "INTKNEPMIS,IN Token Received with EP Mismatch" "0,1" bitfld.long 0x00 4. "INTKNTXFEMP,IN Token Received When TxFIFO is Empty" "0,1" newline bitfld.long 0x00 3. "TIMEOUT,Timeout Condition" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDE990++0x03 line.long 0x00 "DIEP3_TSIZ,Device IN Endpoint x+1 Transfer Size Register" bitfld.long 0x00 29.--30. "MC,Multi Count" "0,1,2,3" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE994++0x03 line.long 0x00 "DIEP3_DMAADDR,Device IN Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," rgroup.long 0xDE998++0x03 line.long 0x00 "DIEP3_DTXFSTS,Device IN Endpoint Transmit FIFO Status Register 1" hexmask.long.word 0x00 0.--15. 1. "SPCAVAIL,IN Endpoint TxFIFO Space Avail" group.long 0xDE9A0++0x03 line.long 0x00 "DIEP4_CTL,Device Control IN Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 22.--25. "TXFNUM,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21. "STALL,Handshake" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even or Odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE9A8++0x03 line.long 0x00 "DIEP4_INT,Device IN Endpoint x+1 Interrupt Register" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" bitfld.long 0x00 12. "BBLEERR,Babble Interrupt" "0,1" newline bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" bitfld.long 0x00 8. "TXFIFOUNDRN,Fifo Underrun" "0,1" newline rbitfld.long 0x00 7. "TXFEMP,Transmit FIFO Empty" "0,1" bitfld.long 0x00 6. "INEPNAKEFF,IN Endpoint NAK Effective" "0,1" newline bitfld.long 0x00 5. "INTKNEPMIS,IN Token Received with EP Mismatch" "0,1" bitfld.long 0x00 4. "INTKNTXFEMP,IN Token Received When TxFIFO is Empty" "0,1" newline bitfld.long 0x00 3. "TIMEOUT,Timeout Condition" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDE9B0++0x03 line.long 0x00 "DIEP4_TSIZ,Device IN Endpoint x+1 Transfer Size Register" bitfld.long 0x00 29.--30. "MC,Multi Count" "0,1,2,3" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE9B4++0x03 line.long 0x00 "DIEP4_DMAADDR,Device IN Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," rgroup.long 0xDE9B8++0x03 line.long 0x00 "DIEP4_DTXFSTS,Device IN Endpoint Transmit FIFO Status Register 1" hexmask.long.word 0x00 0.--15. 1. "SPCAVAIL,IN Endpoint TxFIFO Space Avail" group.long 0xDE9C0++0x03 line.long 0x00 "DIEP5_CTL,Device Control IN Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 22.--25. "TXFNUM,TxFIFO Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 21. "STALL,Handshake" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even or Odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDE9C8++0x03 line.long 0x00 "DIEP5_INT,Device IN Endpoint x+1 Interrupt Register" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" bitfld.long 0x00 12. "BBLEERR,Babble Interrupt" "0,1" newline bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" bitfld.long 0x00 8. "TXFIFOUNDRN,Fifo Underrun" "0,1" newline rbitfld.long 0x00 7. "TXFEMP,Transmit FIFO Empty" "0,1" bitfld.long 0x00 6. "INEPNAKEFF,IN Endpoint NAK Effective" "0,1" newline bitfld.long 0x00 5. "INTKNEPMIS,IN Token Received with EP Mismatch" "0,1" bitfld.long 0x00 4. "INTKNTXFEMP,IN Token Received When TxFIFO is Empty" "0,1" newline bitfld.long 0x00 3. "TIMEOUT,Timeout Condition" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDE9D0++0x03 line.long 0x00 "DIEP5_TSIZ,Device IN Endpoint x+1 Transfer Size Register" bitfld.long 0x00 29.--30. "MC,Multi Count" "0,1,2,3" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDE9D4++0x03 line.long 0x00 "DIEP5_DMAADDR,Device IN Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," rgroup.long 0xDE9D8++0x03 line.long 0x00 "DIEP5_DTXFSTS,Device IN Endpoint Transmit FIFO Status Register 1" hexmask.long.word 0x00 0.--15. 1. "SPCAVAIL,IN Endpoint TxFIFO Space Avail" group.long 0xDEB00++0x03 line.long 0x00 "DOEP0CTL,Device Control OUT Endpoint 0 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" rbitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 21. "STALL,Handshake" "0,1" bitfld.long 0x00 20. "SNP,Snoop Mode" "0,1" newline rbitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0,1,2,3" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" rbitfld.long 0x00 0.--1. "MPS,Maximum Packet Size" "0: 64 bytes,1: 32 bytes,2: 16 bytes,3: 8 bytes" group.long 0xDEB08++0x03 line.long 0x00 "DOEP0INT,Device OUT Endpoint 0 Interrupt Register" bitfld.long 0x00 15. "STUPPKTRCVD," "0,1" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" newline bitfld.long 0x00 12. "BBLEERR,NAK Interrupt" "0,1" bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" newline bitfld.long 0x00 8. "OUTPKTERR,OUT Packet Error" "0,1" bitfld.long 0x00 6. "BACK2BACKSETUP,Back-to-Back SETUP Packets Received" "0,1" newline bitfld.long 0x00 5. "STSPHSERCVD,Status Phase Received For Control" "0,1" bitfld.long 0x00 4. "OUTTKNEPDIS,OUT Token Received When Endpoint Disabled" "0,1" newline bitfld.long 0x00 3. "SETUP,Setup Phase Done" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDEB10++0x03 line.long 0x00 "DOEP0TSIZ,Device OUT Endpoint 0 Transfer Size Register" bitfld.long 0x00 29.--30. "SUPCNT,SETUP Packet Count" "0,1,2,3" bitfld.long 0x00 19. "PKTCNT,Packet Count" "0,1" newline hexmask.long.byte 0x00 0.--6. 1. "XFERSIZE,Transfer Size" group.long 0xDEB14++0x03 line.long 0x00 "DOEP0DMAADDR,Device OUT Endpoint 0 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," group.long 0xDEB20++0x03 line.long 0x00 "DOEP0_CTL,Device Control OUT Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 21. "STALL,STALL Handshake" "0,1" bitfld.long 0x00 20. "SNP,Snoop Mode" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even-odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDEB28++0x03 line.long 0x00 "DOEP0_INT,Device OUT Endpoint x+1 Interrupt Register" bitfld.long 0x00 15. "STUPPKTRCVD," "0,1" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" newline bitfld.long 0x00 12. "BBLEERR,Babble Error" "0,1" bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" newline bitfld.long 0x00 8. "OUTPKTERR,OUT Packet Error" "0,1" bitfld.long 0x00 6. "BACK2BACKSETUP,Back-to-Back SETUP Packets Received" "0,1" newline bitfld.long 0x00 5. "STSPHSERCVD,Status Phase Received For Control" "0,1" bitfld.long 0x00 4. "OUTTKNEPDIS,OUT Token Received When Endpoint Disabled" "0,1" newline bitfld.long 0x00 3. "SETUP,Setup Phase Done" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDEB30++0x03 line.long 0x00 "DOEP0_TSIZ,Device OUT Endpoint x+1 Transfer Size Register" rbitfld.long 0x00 29.--30. "RXDPIDSUPCNT,Receive Data PID / SETUP Packet Count" "0: DATA0 PID,1: DATA2 PID / 1 Packet,2: DATA1 PID / 2 Packets,3: MDATA PID / 3 Packets" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDEB34++0x03 line.long 0x00 "DOEP0_DMAADDR,Device OUT Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," group.long 0xDEB40++0x03 line.long 0x00 "DOEP1_CTL,Device Control OUT Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 21. "STALL,STALL Handshake" "0,1" bitfld.long 0x00 20. "SNP,Snoop Mode" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even-odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDEB48++0x03 line.long 0x00 "DOEP1_INT,Device OUT Endpoint x+1 Interrupt Register" bitfld.long 0x00 15. "STUPPKTRCVD," "0,1" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" newline bitfld.long 0x00 12. "BBLEERR,Babble Error" "0,1" bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" newline bitfld.long 0x00 8. "OUTPKTERR,OUT Packet Error" "0,1" bitfld.long 0x00 6. "BACK2BACKSETUP,Back-to-Back SETUP Packets Received" "0,1" newline bitfld.long 0x00 5. "STSPHSERCVD,Status Phase Received For Control" "0,1" bitfld.long 0x00 4. "OUTTKNEPDIS,OUT Token Received When Endpoint Disabled" "0,1" newline bitfld.long 0x00 3. "SETUP,Setup Phase Done" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDEB50++0x03 line.long 0x00 "DOEP1_TSIZ,Device OUT Endpoint x+1 Transfer Size Register" rbitfld.long 0x00 29.--30. "RXDPIDSUPCNT,Receive Data PID / SETUP Packet Count" "0: DATA0 PID,1: DATA2 PID / 1 Packet,2: DATA1 PID / 2 Packets,3: MDATA PID / 3 Packets" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDEB54++0x03 line.long 0x00 "DOEP1_DMAADDR,Device OUT Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," group.long 0xDEB60++0x03 line.long 0x00 "DOEP2_CTL,Device Control OUT Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 21. "STALL,STALL Handshake" "0,1" bitfld.long 0x00 20. "SNP,Snoop Mode" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even-odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDEB68++0x03 line.long 0x00 "DOEP2_INT,Device OUT Endpoint x+1 Interrupt Register" bitfld.long 0x00 15. "STUPPKTRCVD," "0,1" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" newline bitfld.long 0x00 12. "BBLEERR,Babble Error" "0,1" bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" newline bitfld.long 0x00 8. "OUTPKTERR,OUT Packet Error" "0,1" bitfld.long 0x00 6. "BACK2BACKSETUP,Back-to-Back SETUP Packets Received" "0,1" newline bitfld.long 0x00 5. "STSPHSERCVD,Status Phase Received For Control" "0,1" bitfld.long 0x00 4. "OUTTKNEPDIS,OUT Token Received When Endpoint Disabled" "0,1" newline bitfld.long 0x00 3. "SETUP,Setup Phase Done" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDEB70++0x03 line.long 0x00 "DOEP2_TSIZ,Device OUT Endpoint x+1 Transfer Size Register" rbitfld.long 0x00 29.--30. "RXDPIDSUPCNT,Receive Data PID / SETUP Packet Count" "0: DATA0 PID,1: DATA2 PID / 1 Packet,2: DATA1 PID / 2 Packets,3: MDATA PID / 3 Packets" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDEB74++0x03 line.long 0x00 "DOEP2_DMAADDR,Device OUT Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," group.long 0xDEB80++0x03 line.long 0x00 "DOEP3_CTL,Device Control OUT Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 21. "STALL,STALL Handshake" "0,1" bitfld.long 0x00 20. "SNP,Snoop Mode" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even-odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDEB88++0x03 line.long 0x00 "DOEP3_INT,Device OUT Endpoint x+1 Interrupt Register" bitfld.long 0x00 15. "STUPPKTRCVD," "0,1" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" newline bitfld.long 0x00 12. "BBLEERR,Babble Error" "0,1" bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" newline bitfld.long 0x00 8. "OUTPKTERR,OUT Packet Error" "0,1" bitfld.long 0x00 6. "BACK2BACKSETUP,Back-to-Back SETUP Packets Received" "0,1" newline bitfld.long 0x00 5. "STSPHSERCVD,Status Phase Received For Control" "0,1" bitfld.long 0x00 4. "OUTTKNEPDIS,OUT Token Received When Endpoint Disabled" "0,1" newline bitfld.long 0x00 3. "SETUP,Setup Phase Done" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDEB90++0x03 line.long 0x00 "DOEP3_TSIZ,Device OUT Endpoint x+1 Transfer Size Register" rbitfld.long 0x00 29.--30. "RXDPIDSUPCNT,Receive Data PID / SETUP Packet Count" "0: DATA0 PID,1: DATA2 PID / 1 Packet,2: DATA1 PID / 2 Packets,3: MDATA PID / 3 Packets" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDEB94++0x03 line.long 0x00 "DOEP3_DMAADDR,Device OUT Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," group.long 0xDEBA0++0x03 line.long 0x00 "DOEP4_CTL,Device Control OUT Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 21. "STALL,STALL Handshake" "0,1" bitfld.long 0x00 20. "SNP,Snoop Mode" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even-odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDEBA8++0x03 line.long 0x00 "DOEP4_INT,Device OUT Endpoint x+1 Interrupt Register" bitfld.long 0x00 15. "STUPPKTRCVD," "0,1" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" newline bitfld.long 0x00 12. "BBLEERR,Babble Error" "0,1" bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" newline bitfld.long 0x00 8. "OUTPKTERR,OUT Packet Error" "0,1" bitfld.long 0x00 6. "BACK2BACKSETUP,Back-to-Back SETUP Packets Received" "0,1" newline bitfld.long 0x00 5. "STSPHSERCVD,Status Phase Received For Control" "0,1" bitfld.long 0x00 4. "OUTTKNEPDIS,OUT Token Received When Endpoint Disabled" "0,1" newline bitfld.long 0x00 3. "SETUP,Setup Phase Done" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDEBB0++0x03 line.long 0x00 "DOEP4_TSIZ,Device OUT Endpoint x+1 Transfer Size Register" rbitfld.long 0x00 29.--30. "RXDPIDSUPCNT,Receive Data PID / SETUP Packet Count" "0: DATA0 PID,1: DATA2 PID / 1 Packet,2: DATA1 PID / 2 Packets,3: MDATA PID / 3 Packets" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDEBB4++0x03 line.long 0x00 "DOEP4_DMAADDR,Device OUT Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," group.long 0xDEBC0++0x03 line.long 0x00 "DOEP5_CTL,Device Control OUT Endpoint x+1 Control Register" bitfld.long 0x00 31. "EPENA,Endpoint Enable" "0,1" bitfld.long 0x00 30. "EPDIS,Endpoint Disable" "0,1" newline bitfld.long 0x00 29. "SETD1PIDOF,Set DATA1 PID / Odd Frame" "0,1" bitfld.long 0x00 28. "SETD0PIDEF,Set DATA0 PID / Even Frame" "0,1" newline bitfld.long 0x00 27. "SNAK,Set NAK" "0,1" bitfld.long 0x00 26. "CNAK,Clear NAK" "0,1" newline bitfld.long 0x00 21. "STALL,STALL Handshake" "0,1" bitfld.long 0x00 20. "SNP,Snoop Mode" "0,1" newline bitfld.long 0x00 18.--19. "EPTYPE,Endpoint Type" "0: Control Endpoint,1: Isochronous Endpoint,2: Bulk Endpoint,3: Interrupt Endpoint" rbitfld.long 0x00 17. "NAKSTS,NAK Status" "0,1" newline rbitfld.long 0x00 16. "DPIDEOF,Endpoint Data PID / Even-odd Frame" "0,1" bitfld.long 0x00 15. "USBACTEP,USB Active Endpoint" "0,1" newline hexmask.long.word 0x00 0.--10. 1. "MPS,Maximum Packet Size" group.long 0xDEBC8++0x03 line.long 0x00 "DOEP5_INT,Device OUT Endpoint x+1 Interrupt Register" bitfld.long 0x00 15. "STUPPKTRCVD," "0,1" bitfld.long 0x00 13. "NAKINTRPT,NAK Interrupt" "0,1" newline bitfld.long 0x00 12. "BBLEERR,Babble Error" "0,1" bitfld.long 0x00 11. "PKTDRPSTS,Packet Drop Status" "0,1" newline bitfld.long 0x00 8. "OUTPKTERR,OUT Packet Error" "0,1" bitfld.long 0x00 6. "BACK2BACKSETUP,Back-to-Back SETUP Packets Received" "0,1" newline bitfld.long 0x00 5. "STSPHSERCVD,Status Phase Received For Control" "0,1" bitfld.long 0x00 4. "OUTTKNEPDIS,OUT Token Received When Endpoint Disabled" "0,1" newline bitfld.long 0x00 3. "SETUP,Setup Phase Done" "0,1" bitfld.long 0x00 2. "AHBERR,AHB Error" "0,1" newline bitfld.long 0x00 1. "EPDISBLD,Endpoint Disabled Interrupt" "0,1" bitfld.long 0x00 0. "XFERCOMPL,Transfer Completed Interrupt" "0,1" group.long 0xDEBD0++0x03 line.long 0x00 "DOEP5_TSIZ,Device OUT Endpoint x+1 Transfer Size Register" rbitfld.long 0x00 29.--30. "RXDPIDSUPCNT,Receive Data PID / SETUP Packet Count" "0: DATA0 PID,1: DATA2 PID / 1 Packet,2: DATA1 PID / 2 Packets,3: MDATA PID / 3 Packets" hexmask.long.word 0x00 19.--28. 1. "PKTCNT,Packet Count" newline hexmask.long.tbyte 0x00 0.--18. 1. "XFERSIZE,Transfer Size" group.long 0xDEBD4++0x03 line.long 0x00 "DOEP5_DMAADDR,Device OUT Endpoint x+1 DMA Address Register" hexmask.long 0x00 0.--31. 1. "DMAADDR," group.long 0xDEE00++0x03 line.long 0x00 "PCGCCTL,Power and Clock Gating Control Register" rbitfld.long 0x00 8. "RESETAFTERSUSP,Reset after suspend" "0,1" rbitfld.long 0x00 6. "PHYSLEEP,PHY In Sleep" "0,1" newline bitfld.long 0x00 3. "RSTPDWNMODULE,Reset Power-Down Modules" "0,1" bitfld.long 0x00 2. "PWRCLMP,Power Clamp" "0,1" newline bitfld.long 0x00 1. "GATEHCLK,Gate HCLK" "0,1" bitfld.long 0x00 0. "STOPPCLK,Stop PHY clock" "0,1" tree.end endif tree "VDAC0" base ad:0x40086000 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 31. "DACCLKMODE,Clock Mode" "0,1" bitfld.long 0x00 28. "WARMUPMODE,Warm-up Mode" "0,1" newline bitfld.long 0x00 24.--25. "REFRESHPERIOD,Refresh Period" "0: All channels with enabled refresh are..,1: All channels with enabled refresh are..,2: All channels with enabled refresh are..,3: All channels with enabled refresh are.." hexmask.long.byte 0x00 16.--22. 1. "PRESC,Prescaler Setting for DAC Clock" newline bitfld.long 0x00 8.--10. "REFSEL,Reference Selection" "0: Internal low noise 1.25 V bandgap reference,1: Internal low noise 2.5 V bandgap reference,2: Internal 1.25 V bandgap reference,3: Internal 2.5 V bandgap reference,4: AVDD reference,?,6: External pin reference,?..." bitfld.long 0x00 6. "CH0PRESCRST,Channel 0 Start Reset Prescaler" "0,1" newline bitfld.long 0x00 5. "OUTENPRS,PRS Controlled Output Enable" "0,1" bitfld.long 0x00 4. "SINEMODE,Sine Mode" "0,1" newline bitfld.long 0x00 0. "DIFF,Differential Mode" "0,1" rgroup.long 0x04++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 31. "OPA3OUTVALID,OPA3 Output Valid Status" "0,1" bitfld.long 0x00 30. "OPA2OUTVALID,OPA2 Output Valid Status" "0,1" newline bitfld.long 0x00 29. "OPA1OUTVALID,OPA1 Output Valid Status" "0,1" bitfld.long 0x00 28. "OPA0OUTVALID,OPA0 Output Valid Status" "0,1" newline bitfld.long 0x00 27. "OPA3WARM,OPA3 Warm Status" "0,1" bitfld.long 0x00 26. "OPA2WARM,OPA2 Warm Status" "0,1" newline bitfld.long 0x00 25. "OPA1WARM,OPA1 Warm Status" "0,1" bitfld.long 0x00 24. "OPA0WARM,OPA0 Warm Status" "0,1" newline bitfld.long 0x00 23. "OPA3ENS,OPA3 Enabled Status" "0,1" bitfld.long 0x00 22. "OPA2ENS,OPA2 Enabled Status" "0,1" newline bitfld.long 0x00 21. "OPA1ENS,OPA1 Enabled Status" "0,1" bitfld.long 0x00 20. "OPA0ENS,OPA0 Enabled Status" "0,1" newline bitfld.long 0x00 19. "OPA3APORTCONFLICT,OPA3 Bus Conflict Output" "0,1" bitfld.long 0x00 18. "OPA2APORTCONFLICT,OPA2 Bus Conflict Output" "0,1" newline bitfld.long 0x00 17. "OPA1APORTCONFLICT,OPA1 Bus Conflict Output" "0,1" bitfld.long 0x00 16. "OPA0APORTCONFLICT,OPA0 Bus Conflict Output" "0,1" newline bitfld.long 0x00 5. "CH1WARM,Channel 1 Warm" "0,1" bitfld.long 0x00 4. "CH0WARM,Channel 0 Warm" "0,1" newline bitfld.long 0x00 3. "CH1BL,Channel 1 Buffer Level" "0,1" bitfld.long 0x00 2. "CH0BL,Channel 0 Buffer Level" "0,1" newline bitfld.long 0x00 1. "CH1ENS,Channel 1 Enabled Status" "0,1" bitfld.long 0x00 0. "CH0ENS,Channel 0 Enabled Status" "0,1" group.long 0x08++0x03 line.long 0x00 "CH0CTRL,Channel 0 Control Register" bitfld.long 0x00 12.--15. "PRSSEL,Channel 0 PRS Trigger Select" "0: PRS ch 0 triggers a conversion,1: PRS ch 1 triggers a conversion,2: PRS ch 2 triggers a conversion,3: PRS ch 3 triggers a conversion,4: PRS ch 4 triggers a conversion,5: PRS ch 5 triggers a conversion,6: PRS ch 6 triggers a conversion,7: PRS ch 7 triggers a conversion,8: PRS ch 8 triggers a conversion,9: PRS ch 9 triggers a conversion,10: PRS ch 10 triggers a conversion,11: PRS ch 11 triggers a conversion,12: PRS ch 12 triggers a conversion,13: PRS ch 13 triggers a conversion,14: PRS ch 14 triggers a conversion,15: PRS ch 15 triggers a conversion" bitfld.long 0x00 8. "PRSASYNC,Channel 0 PRS Asynchronous Enable" "0,1" newline bitfld.long 0x00 4.--6. "TRIGMODE,Channel 0 Trigger Mode" "0: Channel 0 is triggered by CH0DATA or COMBDATA,1: Channel 0 is triggered by PRS input,2: Channel 0 is triggered by Refresh timer,3: Channel 0 is triggered by CH0DATA/COMBDATA..,4: Channel 0 is triggered by CH0DATA/COMBDATA..,5: Channel 0 is triggered by LESENSE,?..." bitfld.long 0x00 0. "CONVMODE,Conversion Mode" "0,1" group.long 0x0C++0x03 line.long 0x00 "CH1CTRL,Channel 1 Control Register" bitfld.long 0x00 12.--15. "PRSSEL,Channel 1 PRS Trigger Select" "0: PRS ch 0 triggers a conversion,1: PRS ch 1 triggers a conversion,2: PRS ch 2 triggers a conversion,3: PRS ch 3 triggers a conversion,4: PRS ch 4 triggers a conversion,5: PRS ch 5 triggers a conversion,6: PRS ch 6 triggers a conversion,7: PRS ch 7 triggers a conversion,8: PRS ch 8 triggers a conversion,9: PRS ch 9 triggers a conversion,10: PRS ch 10 triggers a conversion,11: PRS ch 11 triggers a conversion,12: PRS ch 12 triggers a conversion,13: PRS ch 13 triggers a conversion,14: PRS ch 14 triggers a conversion,15: PRS ch 15 triggers a conversion" bitfld.long 0x00 8. "PRSASYNC,Channel 1 PRS Asynchronous Enable" "0,1" newline bitfld.long 0x00 4.--6. "TRIGMODE,Channel 1 Trigger Mode" "0: Channel 1 is triggered by CH1DATA or COMBDATA,1: Channel 1 is triggered by PRS input,2: Channel 1 is triggered by Refresh timer,3: Channel 1 is triggered by CH1DATA/COMBDATA..,4: Channel 1 is triggered by CH1DATA/COMBDATA..,5: Channel 1 is triggered by LESENSE,?..." bitfld.long 0x00 0. "CONVMODE,Conversion Mode" "0,1" wgroup.long 0x10++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 23. "OPA3DIS,OPA3 Disable" "0,1" bitfld.long 0x00 22. "OPA3EN,OPA3 Enable" "0,1" newline bitfld.long 0x00 21. "OPA2DIS,OPA2 Disable" "0,1" bitfld.long 0x00 20. "OPA2EN,OPA2 Enable" "0,1" newline bitfld.long 0x00 19. "OPA1DIS,OPA1 Disable" "0,1" bitfld.long 0x00 18. "OPA1EN,OPA1 Enable" "0,1" newline bitfld.long 0x00 17. "OPA0DIS,OPA0 Disable" "0,1" bitfld.long 0x00 16. "OPA0EN,OPA0 Enable" "0,1" newline bitfld.long 0x00 3. "CH1DIS,DAC Channel 1 Disable" "0,1" bitfld.long 0x00 2. "CH1EN,DAC Channel 1 Enable" "0,1" newline bitfld.long 0x00 1. "CH0DIS,DAC Channel 0 Disable" "0,1" bitfld.long 0x00 0. "CH0EN,DAC Channel 0 Enable" "0,1" rgroup.long 0x14++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 31. "OPA3OUTVALID,OPA3 Output Valid Interrupt Flag" "0,1" bitfld.long 0x00 30. "OPA2OUTVALID,OPA3 Output Valid Interrupt Flag" "0,1" newline bitfld.long 0x00 29. "OPA1OUTVALID,OPA1 Output Valid Interrupt Flag" "0,1" bitfld.long 0x00 28. "OPA0OUTVALID,OPA0 Output Valid Interrupt Flag" "0,1" newline bitfld.long 0x00 23. "OPA3PRSTIMEDERR,OPA3 PRS Trigger Mode Error Interrupt Flag" "0,1" bitfld.long 0x00 22. "OPA2PRSTIMEDERR,OPA2 PRS Trigger Mode Error Interrupt Flag" "0,1" newline bitfld.long 0x00 21. "OPA1PRSTIMEDERR,OPA1 PRS Trigger Mode Error Interrupt Flag" "0,1" bitfld.long 0x00 20. "OPA0PRSTIMEDERR,OPA0 PRS Trigger Mode Error Interrupt Flag" "0,1" newline bitfld.long 0x00 19. "OPA3APORTCONFLICT,OPA3 Bus Conflict Output Interrupt Flag" "0,1" bitfld.long 0x00 18. "OPA2APORTCONFLICT,OPA2 Bus Conflict Output Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "OPA1APORTCONFLICT,OPA1 Bus Conflict Output Interrupt Flag" "0,1" bitfld.long 0x00 16. "OPA0APORTCONFLICT,OPA0 Bus Conflict Output Interrupt Flag" "0,1" newline bitfld.long 0x00 15. "EM23ERR,EM2/3 Entry Error Flag" "0,1" bitfld.long 0x00 7. "CH1BL,Channel 1 Buffer Level Interrupt Flag" "0,1" newline bitfld.long 0x00 6. "CH0BL,Channel 0 Buffer Level Interrupt Flag" "0,1" bitfld.long 0x00 5. "CH1UF,Channel 1 Data Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "CH0UF,Channel 0 Data Underflow Interrupt Flag" "0,1" bitfld.long 0x00 3. "CH1OF,Channel 1 Data Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CH0OF,Channel 0 Data Overflow Interrupt Flag" "0,1" bitfld.long 0x00 1. "CH1CD,Channel 1 Conversion Done Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CH0CD,Channel 0 Conversion Done Interrupt Flag" "0,1" wgroup.long 0x18++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 31. "OPA3OUTVALID,Set OPA3OUTVALID Interrupt Flag" "0,1" bitfld.long 0x00 30. "OPA2OUTVALID,Set OPA2OUTVALID Interrupt Flag" "0,1" newline bitfld.long 0x00 29. "OPA1OUTVALID,Set OPA1OUTVALID Interrupt Flag" "0,1" bitfld.long 0x00 28. "OPA0OUTVALID,Set OPA0OUTVALID Interrupt Flag" "0,1" newline bitfld.long 0x00 23. "OPA3PRSTIMEDERR,Set OPA3PRSTIMEDERR Interrupt Flag" "0,1" bitfld.long 0x00 22. "OPA2PRSTIMEDERR,Set OPA2PRSTIMEDERR Interrupt Flag" "0,1" newline bitfld.long 0x00 21. "OPA1PRSTIMEDERR,Set OPA1PRSTIMEDERR Interrupt Flag" "0,1" bitfld.long 0x00 20. "OPA0PRSTIMEDERR,Set OPA0PRSTIMEDERR Interrupt Flag" "0,1" newline bitfld.long 0x00 19. "OPA3APORTCONFLICT,Set OPA3APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 18. "OPA2APORTCONFLICT,Set OPA2APORTCONFLICT Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "OPA1APORTCONFLICT,Set OPA1APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 16. "OPA0APORTCONFLICT,Set OPA0APORTCONFLICT Interrupt Flag" "0,1" newline bitfld.long 0x00 15. "EM23ERR,Set EM23ERR Interrupt Flag" "0,1" bitfld.long 0x00 5. "CH1UF,Set CH1UF Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "CH0UF,Set CH0UF Interrupt Flag" "0,1" bitfld.long 0x00 3. "CH1OF,Set CH1OF Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CH0OF,Set CH0OF Interrupt Flag" "0,1" bitfld.long 0x00 1. "CH1CD,Set CH1CD Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CH0CD,Set CH0CD Interrupt Flag" "0,1" wgroup.long 0x1C++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 31. "OPA3OUTVALID,Clear OPA3OUTVALID Interrupt Flag" "0,1" bitfld.long 0x00 30. "OPA2OUTVALID,Clear OPA2OUTVALID Interrupt Flag" "0,1" newline bitfld.long 0x00 29. "OPA1OUTVALID,Clear OPA1OUTVALID Interrupt Flag" "0,1" bitfld.long 0x00 28. "OPA0OUTVALID,Clear OPA0OUTVALID Interrupt Flag" "0,1" newline bitfld.long 0x00 23. "OPA3PRSTIMEDERR,Clear OPA3PRSTIMEDERR Interrupt Flag" "0,1" bitfld.long 0x00 22. "OPA2PRSTIMEDERR,Clear OPA2PRSTIMEDERR Interrupt Flag" "0,1" newline bitfld.long 0x00 21. "OPA1PRSTIMEDERR,Clear OPA1PRSTIMEDERR Interrupt Flag" "0,1" bitfld.long 0x00 20. "OPA0PRSTIMEDERR,Clear OPA0PRSTIMEDERR Interrupt Flag" "0,1" newline bitfld.long 0x00 19. "OPA3APORTCONFLICT,Clear OPA3APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 18. "OPA2APORTCONFLICT,Clear OPA2APORTCONFLICT Interrupt Flag" "0,1" newline bitfld.long 0x00 17. "OPA1APORTCONFLICT,Clear OPA1APORTCONFLICT Interrupt Flag" "0,1" bitfld.long 0x00 16. "OPA0APORTCONFLICT,Clear OPA0APORTCONFLICT Interrupt Flag" "0,1" newline bitfld.long 0x00 15. "EM23ERR,Clear EM23ERR Interrupt Flag" "0,1" bitfld.long 0x00 5. "CH1UF,Clear CH1UF Interrupt Flag" "0,1" newline bitfld.long 0x00 4. "CH0UF,Clear CH0UF Interrupt Flag" "0,1" bitfld.long 0x00 3. "CH1OF,Clear CH1OF Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "CH0OF,Clear CH0OF Interrupt Flag" "0,1" bitfld.long 0x00 1. "CH1CD,Clear CH1CD Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "CH0CD,Clear CH0CD Interrupt Flag" "0,1" group.long 0x20++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 31. "OPA3OUTVALID,OPA3OUTVALID Interrupt Enable" "0,1" bitfld.long 0x00 30. "OPA2OUTVALID,OPA2OUTVALID Interrupt Enable" "0,1" newline bitfld.long 0x00 29. "OPA1OUTVALID,OPA1OUTVALID Interrupt Enable" "0,1" bitfld.long 0x00 28. "OPA0OUTVALID,OPA0OUTVALID Interrupt Enable" "0,1" newline bitfld.long 0x00 23. "OPA3PRSTIMEDERR,OPA3PRSTIMEDERR Interrupt Enable" "0,1" bitfld.long 0x00 22. "OPA2PRSTIMEDERR,OPA2PRSTIMEDERR Interrupt Enable" "0,1" newline bitfld.long 0x00 21. "OPA1PRSTIMEDERR,OPA1PRSTIMEDERR Interrupt Enable" "0,1" bitfld.long 0x00 20. "OPA0PRSTIMEDERR,OPA0PRSTIMEDERR Interrupt Enable" "0,1" newline bitfld.long 0x00 19. "OPA3APORTCONFLICT,OPA3APORTCONFLICT Interrupt Enable" "0,1" bitfld.long 0x00 18. "OPA2APORTCONFLICT,OPA2APORTCONFLICT Interrupt Enable" "0,1" newline bitfld.long 0x00 17. "OPA1APORTCONFLICT,OPA1APORTCONFLICT Interrupt Enable" "0,1" bitfld.long 0x00 16. "OPA0APORTCONFLICT,OPA0APORTCONFLICT Interrupt Enable" "0,1" newline bitfld.long 0x00 15. "EM23ERR,EM23ERR Interrupt Enable" "0,1" bitfld.long 0x00 7. "CH1BL,CH1BL Interrupt Enable" "0,1" newline bitfld.long 0x00 6. "CH0BL,CH0BL Interrupt Enable" "0,1" bitfld.long 0x00 5. "CH1UF,CH1UF Interrupt Enable" "0,1" newline bitfld.long 0x00 4. "CH0UF,CH0UF Interrupt Enable" "0,1" bitfld.long 0x00 3. "CH1OF,CH1OF Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "CH0OF,CH0OF Interrupt Enable" "0,1" bitfld.long 0x00 1. "CH1CD,CH1CD Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "CH0CD,CH0CD Interrupt Enable" "0,1" group.long 0x24++0x03 line.long 0x00 "CH0DATA,Channel 0 Data Register" hexmask.long.word 0x00 0.--11. 1. "DATA,Channel 0 Data" group.long 0x28++0x03 line.long 0x00 "CH1DATA,Channel 1 Data Register" hexmask.long.word 0x00 0.--11. 1. "DATA,Channel 1 Data" group.long 0x2C++0x03 line.long 0x00 "COMBDATA,Combined Data Register" hexmask.long.word 0x00 16.--27. 1. "CH1DATA,Channel 1 Data" hexmask.long.word 0x00 0.--11. 1. "CH0DATA,Channel 0 Data" group.long 0x30++0x03 line.long 0x00 "CAL,Calibration Register" bitfld.long 0x00 16.--19. "GAINERRTRIMCH1,Gain Error Trim Value for CH1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--13. "GAINERRTRIM,Gain Error Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--2. "OFFSETTRIM,Input Buffer Offset Calibration Value" "0,1,2,3,4,5,6,7" rgroup.long 0xA0++0x03 line.long 0x00 "OPA0_APORTREQ,Operational Amplifier APORT Request Status Register" bitfld.long 0x00 9. "APORT4YREQ,1 If the Bus Connected to APORT4Y is Requested" "0,1" bitfld.long 0x00 8. "APORT4XREQ,1 If the Bus Connected to APORT4X is Requested" "0,1" newline bitfld.long 0x00 7. "APORT3YREQ,1 If the Bus Connected to APORT3Y is Requested" "0,1" bitfld.long 0x00 6. "APORT3XREQ,1 If the Bus Connected to APORT3X is Requested" "0,1" newline bitfld.long 0x00 5. "APORT2YREQ,1 If the Bus Connected to APORT2Y is Requested" "0,1" bitfld.long 0x00 4. "APORT2XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" newline bitfld.long 0x00 3. "APORT1YREQ,1 If the Bus Connected to APORT1X is Requested" "0,1" bitfld.long 0x00 2. "APORT1XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" rgroup.long 0xA4++0x03 line.long 0x00 "OPA0_APORTCONFLICT,Operational Amplifier APORT Conflict Status Register" bitfld.long 0x00 9. "APORT4YCONFLICT,1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 8. "APORT4XCONFLICT,1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 7. "APORT3YCONFLICT,1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 6. "APORT3XCONFLICT,1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 5. "APORT2YCONFLICT,1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 4. "APORT2XCONFLICT,1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 3. "APORT1YCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 2. "APORT1XCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" group.long 0xA8++0x03 line.long 0x00 "OPA0_CTRL,Operational Amplifier Control Register" bitfld.long 0x00 21. "APORTYMASTERDIS,APORT Bus Master Disable" "0,1" bitfld.long 0x00 20. "APORTXMASTERDIS,APORT Bus Master Disable" "0,1" newline bitfld.long 0x00 16. "PRSOUTMODE,OPAx PRS Output Select" "0,1" bitfld.long 0x00 10.--13. "PRSSEL,OPAx PRS Trigger Select" "0: PRS ch 0 triggers OPA,1: PRS ch 1 triggers OPA,2: PRS ch 2 triggers OPA,3: PRS ch 3 triggers OPA,4: PRS ch 4 triggers OPA,5: PRS ch 5 triggers OPA,6: PRS ch 6 triggers OPA,7: PRS ch 7 triggers OPA,8: PRS ch 8 triggers OPA,9: PRS ch 9 triggers OPA,10: PRS ch 10 triggers OPA,11: PRS ch 11 triggers OPA,12: PRS ch 12 triggers OPA,13: PRS ch 13 triggers OPA,14: PRS ch 14 triggers OPA,15: PRS ch 15 triggers OPA" newline bitfld.long 0x00 9. "PRSMODE,OPAx PRS Trigger Mode" "0,1" bitfld.long 0x00 8. "PRSEN,OPAx PRS Trigger Enable" "0,1" newline bitfld.long 0x00 4. "OUTSCALE,Scale OPAx Output Driving Strength" "0,1" bitfld.long 0x00 3. "HCMDIS,High Common Mode Disable" "0,1" newline bitfld.long 0x00 2. "INCBW,OPAx Unity Gain Bandwidth Scale" "0,1" bitfld.long 0x00 0.--1. "DRIVESTRENGTH,OPAx Operation Mode" "0: Lower accuracy with Low drive strength,1: Low accuracy with Low drive strength,2: High accuracy with High drive strength,3: Higher accuracy with High drive strength" group.long 0xAC++0x03 line.long 0x00 "OPA0_TIMER,Operational Amplifier Timer Control Register" hexmask.long.word 0x00 16.--25. 1. "SETTLETIME,OPAx Output Settling Timeout Value" hexmask.long.byte 0x00 8.--14. 1. "WARMUPTIME,OPAx Warmup Time Count Value" newline bitfld.long 0x00 0.--5. "STARTUPDLY,OPAx Startup Delay Count Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB0++0x03 line.long 0x00 "OPA0_MUX,Operational Amplifier Mux Configuration Register" bitfld.long 0x00 24.--26. "RESSEL,OPAx Resistor Ladder Select" "0: Gain of 1/3,1: Gain of 1,2: Gain of 1 2/3,3: Gain of 2 1/5,4: Gain of 3,5: Gain of 4 1/3,6: Gain of 7,7: Gain of 15" bitfld.long 0x00 20. "GAIN3X,OPAx Dedicated 3x Gain Resistor Ladder" "0,1" newline bitfld.long 0x00 16.--18. "RESINMUX,OPAx Resistor Ladder Input Mux" "0: Set for Unity Gain,1: Set for NEXTOUT(x-1) input,2: NEG pad connected,3: POS pad connected,4: Neg pad of OPA0 connected,5: OPA0 and OPA1 Resmux connected to form fully..,6: VSS connected,?..." hexmask.long.byte 0x00 8.--15. 1. "NEGSEL,OPAx Inverting Input Mux" newline hexmask.long.byte 0x00 0.--7. 1. "POSSEL,OPAx Non-inverting Input Mux" group.long 0xB4++0x03 line.long 0x00 "OPA0_OUT,Operational Amplifier Output Configuration Register" hexmask.long.byte 0x00 16.--23. 1. "APORTOUTSEL,OPAx APORT Output" bitfld.long 0x00 4.--8. "ALTOUTPADEN,OPAx Output Enable Value" "?,1: Alternate Output 0,2: Alternate Output 1,?,4: Alternate Output 2,?,?,?,8: Alternate Output 3,?,?,?,?,?,?,?,16: Alternate Output 4,?..." newline bitfld.long 0x00 3. "SHORT,OPAx Main and Alternative Output Short" "0,1" bitfld.long 0x00 2. "APORTOUTEN,OPAx Aport Output Enable" "0,1" newline bitfld.long 0x00 1. "ALTOUTEN,OPAx Alternative Output Enable" "0,1" bitfld.long 0x00 0. "MAINOUTEN,OPAx Main Output Enable" "0,1" group.long 0xB8++0x03 line.long 0x00 "OPA0_CAL,Operational Amplifier Calibration Register" bitfld.long 0x00 26.--30. "OFFSETN,OPAx Inverting Input Offset Configuration Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. "OFFSETP,OPAx Non-Inverting Input Offset Configuration Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 17.--18. "GM3,Gm3 Trim Value" "0,1,2,3" bitfld.long 0x00 13.--15. "GM,Gm Trim Value" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 10.--11. "CM3,Compensation Cap Cm3 Trim Value" "0,1,2,3" bitfld.long 0x00 5.--8. "CM2,Compensation Cap Cm2 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "CM1,Compensation Cap Cm1 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xC0++0x03 line.long 0x00 "OPA1_APORTREQ,Operational Amplifier APORT Request Status Register" bitfld.long 0x00 9. "APORT4YREQ,1 If the Bus Connected to APORT4Y is Requested" "0,1" bitfld.long 0x00 8. "APORT4XREQ,1 If the Bus Connected to APORT4X is Requested" "0,1" newline bitfld.long 0x00 7. "APORT3YREQ,1 If the Bus Connected to APORT3Y is Requested" "0,1" bitfld.long 0x00 6. "APORT3XREQ,1 If the Bus Connected to APORT3X is Requested" "0,1" newline bitfld.long 0x00 5. "APORT2YREQ,1 If the Bus Connected to APORT2Y is Requested" "0,1" bitfld.long 0x00 4. "APORT2XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" newline bitfld.long 0x00 3. "APORT1YREQ,1 If the Bus Connected to APORT1X is Requested" "0,1" bitfld.long 0x00 2. "APORT1XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" rgroup.long 0xC4++0x03 line.long 0x00 "OPA1_APORTCONFLICT,Operational Amplifier APORT Conflict Status Register" bitfld.long 0x00 9. "APORT4YCONFLICT,1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 8. "APORT4XCONFLICT,1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 7. "APORT3YCONFLICT,1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 6. "APORT3XCONFLICT,1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 5. "APORT2YCONFLICT,1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 4. "APORT2XCONFLICT,1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 3. "APORT1YCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 2. "APORT1XCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" group.long 0xC8++0x03 line.long 0x00 "OPA1_CTRL,Operational Amplifier Control Register" bitfld.long 0x00 21. "APORTYMASTERDIS,APORT Bus Master Disable" "0,1" bitfld.long 0x00 20. "APORTXMASTERDIS,APORT Bus Master Disable" "0,1" newline bitfld.long 0x00 16. "PRSOUTMODE,OPAx PRS Output Select" "0,1" bitfld.long 0x00 10.--13. "PRSSEL,OPAx PRS Trigger Select" "0: PRS ch 0 triggers OPA,1: PRS ch 1 triggers OPA,2: PRS ch 2 triggers OPA,3: PRS ch 3 triggers OPA,4: PRS ch 4 triggers OPA,5: PRS ch 5 triggers OPA,6: PRS ch 6 triggers OPA,7: PRS ch 7 triggers OPA,8: PRS ch 8 triggers OPA,9: PRS ch 9 triggers OPA,10: PRS ch 10 triggers OPA,11: PRS ch 11 triggers OPA,12: PRS ch 12 triggers OPA,13: PRS ch 13 triggers OPA,14: PRS ch 14 triggers OPA,15: PRS ch 15 triggers OPA" newline bitfld.long 0x00 9. "PRSMODE,OPAx PRS Trigger Mode" "0,1" bitfld.long 0x00 8. "PRSEN,OPAx PRS Trigger Enable" "0,1" newline bitfld.long 0x00 4. "OUTSCALE,Scale OPAx Output Driving Strength" "0,1" bitfld.long 0x00 3. "HCMDIS,High Common Mode Disable" "0,1" newline bitfld.long 0x00 2. "INCBW,OPAx Unity Gain Bandwidth Scale" "0,1" bitfld.long 0x00 0.--1. "DRIVESTRENGTH,OPAx Operation Mode" "0: Lower accuracy with Low drive strength,1: Low accuracy with Low drive strength,2: High accuracy with High drive strength,3: Higher accuracy with High drive strength" group.long 0xCC++0x03 line.long 0x00 "OPA1_TIMER,Operational Amplifier Timer Control Register" hexmask.long.word 0x00 16.--25. 1. "SETTLETIME,OPAx Output Settling Timeout Value" hexmask.long.byte 0x00 8.--14. 1. "WARMUPTIME,OPAx Warmup Time Count Value" newline bitfld.long 0x00 0.--5. "STARTUPDLY,OPAx Startup Delay Count Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD0++0x03 line.long 0x00 "OPA1_MUX,Operational Amplifier Mux Configuration Register" bitfld.long 0x00 24.--26. "RESSEL,OPAx Resistor Ladder Select" "0: Gain of 1/3,1: Gain of 1,2: Gain of 1 2/3,3: Gain of 2 1/5,4: Gain of 3,5: Gain of 4 1/3,6: Gain of 7,7: Gain of 15" bitfld.long 0x00 20. "GAIN3X,OPAx Dedicated 3x Gain Resistor Ladder" "0,1" newline bitfld.long 0x00 16.--18. "RESINMUX,OPAx Resistor Ladder Input Mux" "0: Set for Unity Gain,1: Set for NEXTOUT(x-1) input,2: NEG pad connected,3: POS pad connected,4: Neg pad of OPA0 connected,5: OPA0 and OPA1 Resmux connected to form fully..,6: VSS connected,?..." hexmask.long.byte 0x00 8.--15. 1. "NEGSEL,OPAx Inverting Input Mux" newline hexmask.long.byte 0x00 0.--7. 1. "POSSEL,OPAx Non-inverting Input Mux" group.long 0xD4++0x03 line.long 0x00 "OPA1_OUT,Operational Amplifier Output Configuration Register" hexmask.long.byte 0x00 16.--23. 1. "APORTOUTSEL,OPAx APORT Output" bitfld.long 0x00 4.--8. "ALTOUTPADEN,OPAx Output Enable Value" "?,1: Alternate Output 0,2: Alternate Output 1,?,4: Alternate Output 2,?,?,?,8: Alternate Output 3,?,?,?,?,?,?,?,16: Alternate Output 4,?..." newline bitfld.long 0x00 3. "SHORT,OPAx Main and Alternative Output Short" "0,1" bitfld.long 0x00 2. "APORTOUTEN,OPAx Aport Output Enable" "0,1" newline bitfld.long 0x00 1. "ALTOUTEN,OPAx Alternative Output Enable" "0,1" bitfld.long 0x00 0. "MAINOUTEN,OPAx Main Output Enable" "0,1" group.long 0xD8++0x03 line.long 0x00 "OPA1_CAL,Operational Amplifier Calibration Register" bitfld.long 0x00 26.--30. "OFFSETN,OPAx Inverting Input Offset Configuration Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. "OFFSETP,OPAx Non-Inverting Input Offset Configuration Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 17.--18. "GM3,Gm3 Trim Value" "0,1,2,3" bitfld.long 0x00 13.--15. "GM,Gm Trim Value" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 10.--11. "CM3,Compensation Cap Cm3 Trim Value" "0,1,2,3" bitfld.long 0x00 5.--8. "CM2,Compensation Cap Cm2 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "CM1,Compensation Cap Cm1 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0xE0++0x03 line.long 0x00 "OPA2_APORTREQ,Operational Amplifier APORT Request Status Register" bitfld.long 0x00 9. "APORT4YREQ,1 If the Bus Connected to APORT4Y is Requested" "0,1" bitfld.long 0x00 8. "APORT4XREQ,1 If the Bus Connected to APORT4X is Requested" "0,1" newline bitfld.long 0x00 7. "APORT3YREQ,1 If the Bus Connected to APORT3Y is Requested" "0,1" bitfld.long 0x00 6. "APORT3XREQ,1 If the Bus Connected to APORT3X is Requested" "0,1" newline bitfld.long 0x00 5. "APORT2YREQ,1 If the Bus Connected to APORT2Y is Requested" "0,1" bitfld.long 0x00 4. "APORT2XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" newline bitfld.long 0x00 3. "APORT1YREQ,1 If the Bus Connected to APORT1X is Requested" "0,1" bitfld.long 0x00 2. "APORT1XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" rgroup.long 0xE4++0x03 line.long 0x00 "OPA2_APORTCONFLICT,Operational Amplifier APORT Conflict Status Register" bitfld.long 0x00 9. "APORT4YCONFLICT,1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 8. "APORT4XCONFLICT,1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 7. "APORT3YCONFLICT,1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 6. "APORT3XCONFLICT,1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 5. "APORT2YCONFLICT,1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 4. "APORT2XCONFLICT,1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 3. "APORT1YCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 2. "APORT1XCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" group.long 0xE8++0x03 line.long 0x00 "OPA2_CTRL,Operational Amplifier Control Register" bitfld.long 0x00 21. "APORTYMASTERDIS,APORT Bus Master Disable" "0,1" bitfld.long 0x00 20. "APORTXMASTERDIS,APORT Bus Master Disable" "0,1" newline bitfld.long 0x00 16. "PRSOUTMODE,OPAx PRS Output Select" "0,1" bitfld.long 0x00 10.--13. "PRSSEL,OPAx PRS Trigger Select" "0: PRS ch 0 triggers OPA,1: PRS ch 1 triggers OPA,2: PRS ch 2 triggers OPA,3: PRS ch 3 triggers OPA,4: PRS ch 4 triggers OPA,5: PRS ch 5 triggers OPA,6: PRS ch 6 triggers OPA,7: PRS ch 7 triggers OPA,8: PRS ch 8 triggers OPA,9: PRS ch 9 triggers OPA,10: PRS ch 10 triggers OPA,11: PRS ch 11 triggers OPA,12: PRS ch 12 triggers OPA,13: PRS ch 13 triggers OPA,14: PRS ch 14 triggers OPA,15: PRS ch 15 triggers OPA" newline bitfld.long 0x00 9. "PRSMODE,OPAx PRS Trigger Mode" "0,1" bitfld.long 0x00 8. "PRSEN,OPAx PRS Trigger Enable" "0,1" newline bitfld.long 0x00 4. "OUTSCALE,Scale OPAx Output Driving Strength" "0,1" bitfld.long 0x00 3. "HCMDIS,High Common Mode Disable" "0,1" newline bitfld.long 0x00 2. "INCBW,OPAx Unity Gain Bandwidth Scale" "0,1" bitfld.long 0x00 0.--1. "DRIVESTRENGTH,OPAx Operation Mode" "0: Lower accuracy with Low drive strength,1: Low accuracy with Low drive strength,2: High accuracy with High drive strength,3: Higher accuracy with High drive strength" group.long 0xEC++0x03 line.long 0x00 "OPA2_TIMER,Operational Amplifier Timer Control Register" hexmask.long.word 0x00 16.--25. 1. "SETTLETIME,OPAx Output Settling Timeout Value" hexmask.long.byte 0x00 8.--14. 1. "WARMUPTIME,OPAx Warmup Time Count Value" newline bitfld.long 0x00 0.--5. "STARTUPDLY,OPAx Startup Delay Count Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xF0++0x03 line.long 0x00 "OPA2_MUX,Operational Amplifier Mux Configuration Register" bitfld.long 0x00 24.--26. "RESSEL,OPAx Resistor Ladder Select" "0: Gain of 1/3,1: Gain of 1,2: Gain of 1 2/3,3: Gain of 2 1/5,4: Gain of 3,5: Gain of 4 1/3,6: Gain of 7,7: Gain of 15" bitfld.long 0x00 20. "GAIN3X,OPAx Dedicated 3x Gain Resistor Ladder" "0,1" newline bitfld.long 0x00 16.--18. "RESINMUX,OPAx Resistor Ladder Input Mux" "0: Set for Unity Gain,1: Set for NEXTOUT(x-1) input,2: NEG pad connected,3: POS pad connected,4: Neg pad of OPA0 connected,5: OPA0 and OPA1 Resmux connected to form fully..,6: VSS connected,?..." hexmask.long.byte 0x00 8.--15. 1. "NEGSEL,OPAx Inverting Input Mux" newline hexmask.long.byte 0x00 0.--7. 1. "POSSEL,OPAx Non-inverting Input Mux" group.long 0xF4++0x03 line.long 0x00 "OPA2_OUT,Operational Amplifier Output Configuration Register" hexmask.long.byte 0x00 16.--23. 1. "APORTOUTSEL,OPAx APORT Output" bitfld.long 0x00 4.--8. "ALTOUTPADEN,OPAx Output Enable Value" "?,1: Alternate Output 0,2: Alternate Output 1,?,4: Alternate Output 2,?,?,?,8: Alternate Output 3,?,?,?,?,?,?,?,16: Alternate Output 4,?..." newline bitfld.long 0x00 3. "SHORT,OPAx Main and Alternative Output Short" "0,1" bitfld.long 0x00 2. "APORTOUTEN,OPAx Aport Output Enable" "0,1" newline bitfld.long 0x00 1. "ALTOUTEN,OPAx Alternative Output Enable" "0,1" bitfld.long 0x00 0. "MAINOUTEN,OPAx Main Output Enable" "0,1" group.long 0xF8++0x03 line.long 0x00 "OPA2_CAL,Operational Amplifier Calibration Register" bitfld.long 0x00 26.--30. "OFFSETN,OPAx Inverting Input Offset Configuration Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. "OFFSETP,OPAx Non-Inverting Input Offset Configuration Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 17.--18. "GM3,Gm3 Trim Value" "0,1,2,3" bitfld.long 0x00 13.--15. "GM,Gm Trim Value" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 10.--11. "CM3,Compensation Cap Cm3 Trim Value" "0,1,2,3" bitfld.long 0x00 5.--8. "CM2,Compensation Cap Cm2 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "CM1,Compensation Cap Cm1 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long 0x100++0x03 line.long 0x00 "OPA3_APORTREQ,Operational Amplifier APORT Request Status Register" bitfld.long 0x00 9. "APORT4YREQ,1 If the Bus Connected to APORT4Y is Requested" "0,1" bitfld.long 0x00 8. "APORT4XREQ,1 If the Bus Connected to APORT4X is Requested" "0,1" newline bitfld.long 0x00 7. "APORT3YREQ,1 If the Bus Connected to APORT3Y is Requested" "0,1" bitfld.long 0x00 6. "APORT3XREQ,1 If the Bus Connected to APORT3X is Requested" "0,1" newline bitfld.long 0x00 5. "APORT2YREQ,1 If the Bus Connected to APORT2Y is Requested" "0,1" bitfld.long 0x00 4. "APORT2XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" newline bitfld.long 0x00 3. "APORT1YREQ,1 If the Bus Connected to APORT1X is Requested" "0,1" bitfld.long 0x00 2. "APORT1XREQ,1 If the Bus Connected to APORT2X is Requested" "0,1" rgroup.long 0x104++0x03 line.long 0x00 "OPA3_APORTCONFLICT,Operational Amplifier APORT Conflict Status Register" bitfld.long 0x00 9. "APORT4YCONFLICT,1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 8. "APORT4XCONFLICT,1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 7. "APORT3YCONFLICT,1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 6. "APORT3XCONFLICT,1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 5. "APORT2YCONFLICT,1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 4. "APORT2XCONFLICT,1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral" "0,1" newline bitfld.long 0x00 3. "APORT1YCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" bitfld.long 0x00 2. "APORT1XCONFLICT,1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral" "0,1" group.long 0x108++0x03 line.long 0x00 "OPA3_CTRL,Operational Amplifier Control Register" bitfld.long 0x00 21. "APORTYMASTERDIS,APORT Bus Master Disable" "0,1" bitfld.long 0x00 20. "APORTXMASTERDIS,APORT Bus Master Disable" "0,1" newline bitfld.long 0x00 16. "PRSOUTMODE,OPAx PRS Output Select" "0,1" bitfld.long 0x00 10.--13. "PRSSEL,OPAx PRS Trigger Select" "0: PRS ch 0 triggers OPA,1: PRS ch 1 triggers OPA,2: PRS ch 2 triggers OPA,3: PRS ch 3 triggers OPA,4: PRS ch 4 triggers OPA,5: PRS ch 5 triggers OPA,6: PRS ch 6 triggers OPA,7: PRS ch 7 triggers OPA,8: PRS ch 8 triggers OPA,9: PRS ch 9 triggers OPA,10: PRS ch 10 triggers OPA,11: PRS ch 11 triggers OPA,12: PRS ch 12 triggers OPA,13: PRS ch 13 triggers OPA,14: PRS ch 14 triggers OPA,15: PRS ch 15 triggers OPA" newline bitfld.long 0x00 9. "PRSMODE,OPAx PRS Trigger Mode" "0,1" bitfld.long 0x00 8. "PRSEN,OPAx PRS Trigger Enable" "0,1" newline bitfld.long 0x00 4. "OUTSCALE,Scale OPAx Output Driving Strength" "0,1" bitfld.long 0x00 3. "HCMDIS,High Common Mode Disable" "0,1" newline bitfld.long 0x00 2. "INCBW,OPAx Unity Gain Bandwidth Scale" "0,1" bitfld.long 0x00 0.--1. "DRIVESTRENGTH,OPAx Operation Mode" "0: Lower accuracy with Low drive strength,1: Low accuracy with Low drive strength,2: High accuracy with High drive strength,3: Higher accuracy with High drive strength" group.long 0x10C++0x03 line.long 0x00 "OPA3_TIMER,Operational Amplifier Timer Control Register" hexmask.long.word 0x00 16.--25. 1. "SETTLETIME,OPAx Output Settling Timeout Value" hexmask.long.byte 0x00 8.--14. 1. "WARMUPTIME,OPAx Warmup Time Count Value" newline bitfld.long 0x00 0.--5. "STARTUPDLY,OPAx Startup Delay Count Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x110++0x03 line.long 0x00 "OPA3_MUX,Operational Amplifier Mux Configuration Register" bitfld.long 0x00 24.--26. "RESSEL,OPAx Resistor Ladder Select" "0: Gain of 1/3,1: Gain of 1,2: Gain of 1 2/3,3: Gain of 2 1/5,4: Gain of 3,5: Gain of 4 1/3,6: Gain of 7,7: Gain of 15" bitfld.long 0x00 20. "GAIN3X,OPAx Dedicated 3x Gain Resistor Ladder" "0,1" newline bitfld.long 0x00 16.--18. "RESINMUX,OPAx Resistor Ladder Input Mux" "0: Set for Unity Gain,1: Set for NEXTOUT(x-1) input,2: NEG pad connected,3: POS pad connected,4: Neg pad of OPA0 connected,5: OPA0 and OPA1 Resmux connected to form fully..,6: VSS connected,?..." hexmask.long.byte 0x00 8.--15. 1. "NEGSEL,OPAx Inverting Input Mux" newline hexmask.long.byte 0x00 0.--7. 1. "POSSEL,OPAx Non-inverting Input Mux" group.long 0x114++0x03 line.long 0x00 "OPA3_OUT,Operational Amplifier Output Configuration Register" hexmask.long.byte 0x00 16.--23. 1. "APORTOUTSEL,OPAx APORT Output" bitfld.long 0x00 4.--8. "ALTOUTPADEN,OPAx Output Enable Value" "?,1: Alternate Output 0,2: Alternate Output 1,?,4: Alternate Output 2,?,?,?,8: Alternate Output 3,?,?,?,?,?,?,?,16: Alternate Output 4,?..." newline bitfld.long 0x00 3. "SHORT,OPAx Main and Alternative Output Short" "0,1" bitfld.long 0x00 2. "APORTOUTEN,OPAx Aport Output Enable" "0,1" newline bitfld.long 0x00 1. "ALTOUTEN,OPAx Alternative Output Enable" "0,1" bitfld.long 0x00 0. "MAINOUTEN,OPAx Main Output Enable" "0,1" group.long 0x118++0x03 line.long 0x00 "OPA3_CAL,Operational Amplifier Calibration Register" bitfld.long 0x00 26.--30. "OFFSETN,OPAx Inverting Input Offset Configuration Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. "OFFSETP,OPAx Non-Inverting Input Offset Configuration Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 17.--18. "GM3,Gm3 Trim Value" "0,1,2,3" bitfld.long 0x00 13.--15. "GM,Gm Trim Value" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 10.--11. "CM3,Compensation Cap Cm3 Trim Value" "0,1,2,3" bitfld.long 0x00 5.--8. "CM2,Compensation Cap Cm2 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--3. "CM1,Compensation Cap Cm1 Trim Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree "WDOG (Watchdog Timer Unit)" repeat 2. (list 0. 1.) (list ad:0x40052000 ad:0x40052400) tree "WDOG$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 31. "WDOGRSTDIS,Watchdog Reset Disable" "0,1" bitfld.long 0x00 30. "CLRSRC,Watchdog Clear Source" "0,1" newline bitfld.long 0x00 24.--26. "WINSEL,Watchdog Illegal Window Select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--17. "WARNSEL,Watchdog Timeout Period Select" "0,1,2,3" newline bitfld.long 0x00 12.--13. "CLKSEL,Watchdog Clock Select" "0: ULFRCO,1: LFRCO,2: LFXO,3: HFCORECLK" bitfld.long 0x00 8.--11. "PERSEL,Watchdog Timeout Period Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 6. "SWOSCBLOCK,Software Oscillator Disable Block" "0,1" bitfld.long 0x00 5. "EM4BLOCK,Energy Mode 4 Block" "0,1" newline bitfld.long 0x00 4. "LOCK,Configuration Lock" "0,1" bitfld.long 0x00 3. "EM3RUN,Energy Mode 3 Run Enable" "0,1" newline bitfld.long 0x00 2. "EM2RUN,Energy Mode 2 Run Enable" "0,1" bitfld.long 0x00 1. "DEBUGRUN,Debug Mode Run Enable" "0,1" newline bitfld.long 0x00 0. "EN,Watchdog Timer Enable" "0,1" wgroup.long 0x04++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 0. "CLEAR,Watchdog Timer Clear" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "SYNCBUSY,Synchronization Busy Register" bitfld.long 0x00 3. "PCH1_PRSCTRL,PCH1_PRSCTRL Register Busy" "0,1" bitfld.long 0x00 2. "PCH0_PRSCTRL,PCH0_PRSCTRL Register Busy" "0,1" newline bitfld.long 0x00 1. "CMD,CMD Register Busy" "0,1" bitfld.long 0x00 0. "CTRL,CTRL Register Busy" "0,1" group.long 0x0C++0x03 line.long 0x00 "PCH0_PRSCTRL,PRS Control Register" bitfld.long 0x00 8. "PRSMISSRSTEN,PRS Missing Event Will Trigger a Watchdog Reset" "0,1" bitfld.long 0x00 0.--3. "PRSSEL,PRS Channel PRS Select" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" group.long 0x10++0x03 line.long 0x00 "PCH1_PRSCTRL,PRS Control Register" bitfld.long 0x00 8. "PRSMISSRSTEN,PRS Missing Event Will Trigger a Watchdog Reset" "0,1" bitfld.long 0x00 0.--3. "PRSSEL,PRS Channel PRS Select" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" rgroup.long 0x1C++0x03 line.long 0x00 "IF,Watchdog Interrupt Flags" bitfld.long 0x00 4. "PEM1,PRS Channel One Event Missing Interrupt Flag" "0,1" bitfld.long 0x00 3. "PEM0,PRS Channel Zero Event Missing Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "WIN,WDOG Window Interrupt Flag" "0,1" bitfld.long 0x00 1. "WARN,WDOG Warning Timeout Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TOUT,WDOG Timeout Interrupt Flag" "0,1" wgroup.long 0x20++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 4. "PEM1,Set PEM1 Interrupt Flag" "0,1" bitfld.long 0x00 3. "PEM0,Set PEM0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "WIN,Set WIN Interrupt Flag" "0,1" bitfld.long 0x00 1. "WARN,Set WARN Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TOUT,Set TOUT Interrupt Flag" "0,1" wgroup.long 0x24++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 4. "PEM1,Clear PEM1 Interrupt Flag" "0,1" bitfld.long 0x00 3. "PEM0,Clear PEM0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "WIN,Clear WIN Interrupt Flag" "0,1" bitfld.long 0x00 1. "WARN,Clear WARN Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "TOUT,Clear TOUT Interrupt Flag" "0,1" group.long 0x28++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 4. "PEM1,PEM1 Interrupt Enable" "0,1" bitfld.long 0x00 3. "PEM0,PEM0 Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "WIN,WIN Interrupt Enable" "0,1" bitfld.long 0x00 1. "WARN,WARN Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "TOUT,TOUT Interrupt Enable" "0,1" tree.end repeat.end tree.end tree "WTIMER (WTIMER0)" repeat 2. (list 0. 1.) (list ad:0x4001A000 ad:0x4001A400) tree "WTIMER$1" base $2 group.long 0x00++0x03 line.long 0x00 "CTRL,Control Register" bitfld.long 0x00 29. "RSSCOIST,Reload-Start Sets Compare Output Initial State" "0,1" bitfld.long 0x00 28. "ATI,Always Track Inputs" "0,1" newline bitfld.long 0x00 24.--27. "PRESC,Prescaler Setting" "0: The HFPERCLK is undivided,1: The HFPERCLK is divided by 2,2: The HFPERCLK is divided by 4,3: The HFPERCLK is divided by 8,4: The HFPERCLK is divided by 16,5: The HFPERCLK is divided by 32,6: The HFPERCLK is divided by 64,7: The HFPERCLK is divided by 128,8: The HFPERCLK is divided by 256,9: The HFPERCLK is divided by 512,10: The HFPERCLK is divided by 1024,?..." bitfld.long 0x00 16.--17. "CLKSEL,Clock Source Select" "0: Prescaled HFPERCLK,1: Compare/Capture Channel 1 Input,2: Timer is clocked by underflow(down-count) or..,?..." newline bitfld.long 0x00 14. "DISSYNCOUT,Disable Timer From Start/Stop/Reload Other Synchronized Timers" "0,1" bitfld.long 0x00 13. "X2CNT,2x Count Mode" "0,1" newline bitfld.long 0x00 10.--11. "FALLA,Timer Falling Input Edge Action" "0: No action,1: Start counter without reload,2: Stop counter without reload,3: Reload and start counter" bitfld.long 0x00 8.--9. "RISEA,Timer Rising Input Edge Action" "0: No action,1: Start counter without reload,2: Stop counter without reload,3: Reload and start counter" newline bitfld.long 0x00 7. "DMACLRACT,DMA Request Clear on Active" "0,1" bitfld.long 0x00 6. "DEBUGRUN,Debug Mode Run Enable" "0,1" newline bitfld.long 0x00 5. "QDM,Quadrature Decoder Mode Selection" "0,1" bitfld.long 0x00 4. "OSMEN,One-shot Mode Enable" "0,1" newline bitfld.long 0x00 3. "SYNC,Timer Start/Stop/Reload Synchronization" "0,1" bitfld.long 0x00 0.--1. "MODE,Timer Mode" "0: Up-count mode,1: Down-count mode,2: Up/down-count mode,3: Quadrature decoder mode" wgroup.long 0x04++0x03 line.long 0x00 "CMD,Command Register" bitfld.long 0x00 1. "STOP,Stop Timer" "0,1" bitfld.long 0x00 0. "START,Start Timer" "0,1" rgroup.long 0x08++0x03 line.long 0x00 "STATUS,Status Register" bitfld.long 0x00 27. "CCPOL3,CC3 Polarity" "0,1" bitfld.long 0x00 26. "CCPOL2,CC2 Polarity" "0,1" newline bitfld.long 0x00 25. "CCPOL1,CC1 Polarity" "0,1" bitfld.long 0x00 24. "CCPOL0,CC0 Polarity" "0,1" newline bitfld.long 0x00 19. "ICV3,CC3 Input Capture Valid" "0,1" bitfld.long 0x00 18. "ICV2,CC2 Input Capture Valid" "0,1" newline bitfld.long 0x00 17. "ICV1,CC1 Input Capture Valid" "0,1" bitfld.long 0x00 16. "ICV0,CC0 Input Capture Valid" "0,1" newline bitfld.long 0x00 11. "CCVBV3,CC3 CCVB Valid" "0,1" bitfld.long 0x00 10. "CCVBV2,CC2 CCVB Valid" "0,1" newline bitfld.long 0x00 9. "CCVBV1,CC1 CCVB Valid" "0,1" bitfld.long 0x00 8. "CCVBV0,CC0 CCVB Valid" "0,1" newline bitfld.long 0x00 2. "TOPBV,TOPB Valid" "0,1" bitfld.long 0x00 1. "DIR,Direction" "0,1" newline bitfld.long 0x00 0. "RUNNING,Running" "0,1" rgroup.long 0x0C++0x03 line.long 0x00 "IF,Interrupt Flag Register" bitfld.long 0x00 11. "ICBOF3,CC Channel 3 Input Capture Buffer Overflow Interrupt Flag" "0,1" bitfld.long 0x00 10. "ICBOF2,CC Channel 2 Input Capture Buffer Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "ICBOF1,CC Channel 1 Input Capture Buffer Overflow Interrupt Flag" "0,1" bitfld.long 0x00 8. "ICBOF0,CC Channel 0 Input Capture Buffer Overflow Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "CC3,CC Channel 3 Interrupt Flag" "0,1" bitfld.long 0x00 6. "CC2,CC Channel 2 Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CC1,CC Channel 1 Interrupt Flag" "0,1" bitfld.long 0x00 4. "CC0,CC Channel 0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "DIRCHG,Direction Change Detect Interrupt Flag" "0,1" bitfld.long 0x00 1. "UF,Underflow Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Overflow Interrupt Flag" "0,1" wgroup.long 0x10++0x03 line.long 0x00 "IFS,Interrupt Flag Set Register" bitfld.long 0x00 11. "ICBOF3,Set ICBOF3 Interrupt Flag" "0,1" bitfld.long 0x00 10. "ICBOF2,Set ICBOF2 Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "ICBOF1,Set ICBOF1 Interrupt Flag" "0,1" bitfld.long 0x00 8. "ICBOF0,Set ICBOF0 Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "CC3,Set CC3 Interrupt Flag" "0,1" bitfld.long 0x00 6. "CC2,Set CC2 Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CC1,Set CC1 Interrupt Flag" "0,1" bitfld.long 0x00 4. "CC0,Set CC0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "DIRCHG,Set DIRCHG Interrupt Flag" "0,1" bitfld.long 0x00 1. "UF,Set UF Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Set OF Interrupt Flag" "0,1" wgroup.long 0x14++0x03 line.long 0x00 "IFC,Interrupt Flag Clear Register" bitfld.long 0x00 11. "ICBOF3,Clear ICBOF3 Interrupt Flag" "0,1" bitfld.long 0x00 10. "ICBOF2,Clear ICBOF2 Interrupt Flag" "0,1" newline bitfld.long 0x00 9. "ICBOF1,Clear ICBOF1 Interrupt Flag" "0,1" bitfld.long 0x00 8. "ICBOF0,Clear ICBOF0 Interrupt Flag" "0,1" newline bitfld.long 0x00 7. "CC3,Clear CC3 Interrupt Flag" "0,1" bitfld.long 0x00 6. "CC2,Clear CC2 Interrupt Flag" "0,1" newline bitfld.long 0x00 5. "CC1,Clear CC1 Interrupt Flag" "0,1" bitfld.long 0x00 4. "CC0,Clear CC0 Interrupt Flag" "0,1" newline bitfld.long 0x00 2. "DIRCHG,Clear DIRCHG Interrupt Flag" "0,1" bitfld.long 0x00 1. "UF,Clear UF Interrupt Flag" "0,1" newline bitfld.long 0x00 0. "OF,Clear OF Interrupt Flag" "0,1" group.long 0x18++0x03 line.long 0x00 "IEN,Interrupt Enable Register" bitfld.long 0x00 11. "ICBOF3,ICBOF3 Interrupt Enable" "0,1" bitfld.long 0x00 10. "ICBOF2,ICBOF2 Interrupt Enable" "0,1" newline bitfld.long 0x00 9. "ICBOF1,ICBOF1 Interrupt Enable" "0,1" bitfld.long 0x00 8. "ICBOF0,ICBOF0 Interrupt Enable" "0,1" newline bitfld.long 0x00 7. "CC3,CC3 Interrupt Enable" "0,1" bitfld.long 0x00 6. "CC2,CC2 Interrupt Enable" "0,1" newline bitfld.long 0x00 5. "CC1,CC1 Interrupt Enable" "0,1" bitfld.long 0x00 4. "CC0,CC0 Interrupt Enable" "0,1" newline bitfld.long 0x00 2. "DIRCHG,DIRCHG Interrupt Enable" "0,1" bitfld.long 0x00 1. "UF,UF Interrupt Enable" "0,1" newline bitfld.long 0x00 0. "OF,OF Interrupt Enable" "0,1" group.long 0x1C++0x03 line.long 0x00 "TOP,Counter Top Value Register" hexmask.long 0x00 0.--31. 1. "TOP,Counter Top Value" group.long 0x20++0x03 line.long 0x00 "TOPB,Counter Top Value Buffer Register" hexmask.long 0x00 0.--31. 1. "TOPB,Counter Top Value Buffer" group.long 0x24++0x03 line.long 0x00 "CNT,Counter Value Register" hexmask.long 0x00 0.--31. 1. "CNT,Counter Value" group.long 0x2C++0x03 line.long 0x00 "LOCK,TIMER Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "TIMERLOCKKEY,Timer Lock Key" group.long 0x30++0x03 line.long 0x00 "ROUTEPEN,I/O Routing Pin Enable Register" bitfld.long 0x00 10. "CDTI2PEN,CC Channel 2 Complementary Dead-Time Insertion Pin Enable" "0,1" bitfld.long 0x00 9. "CDTI1PEN,CC Channel 1 Complementary Dead-Time Insertion Pin Enable" "0,1" newline bitfld.long 0x00 8. "CDTI0PEN,CC Channel 0 Complementary Dead-Time Insertion Pin Enable" "0,1" bitfld.long 0x00 3. "CC3PEN,CC Channel 3 Pin Enable" "0,1" newline bitfld.long 0x00 2. "CC2PEN,CC Channel 2 Pin Enable" "0,1" bitfld.long 0x00 1. "CC1PEN,CC Channel 1 Pin Enable" "0,1" newline bitfld.long 0x00 0. "CC0PEN,CC Channel 0 Pin Enable" "0,1" group.long 0x34++0x03 line.long 0x00 "ROUTELOC0,I/O Routing Location Register" bitfld.long 0x00 24.--29. "CC3LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,?..." bitfld.long 0x00 16.--21. "CC2LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." newline bitfld.long 0x00 8.--13. "CC1LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." bitfld.long 0x00 0.--5. "CC0LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,5: Location 5,6: Location 6,7: Location 7,?..." group.long 0x3C++0x03 line.long 0x00 "ROUTELOC2,I/O Routing Location Register" bitfld.long 0x00 16.--21. "CDTI2LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." bitfld.long 0x00 8.--13. "CDTI1LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." newline bitfld.long 0x00 0.--5. "CDTI0LOC,I/O Location" "0: Location 0,1: Location 1,2: Location 2,3: Location 3,4: Location 4,?..." group.long 0x60++0x03 line.long 0x00 "CC0_CTRL,CC Channel Control Register" bitfld.long 0x00 30. "FILT,Digital Filter" "0,1" bitfld.long 0x00 29. "INSEL,Input Selection" "0,1" newline bitfld.long 0x00 28. "PRSCONF,PRS Configuration" "0,1" bitfld.long 0x00 26.--27. "ICEVCTRL,Input Capture Event Control" "0: PRS output pulse and interrupt flag set on..,1: PRS output pulse and interrupt flag set on..,2: PRS output pulse and interrupt flag set on..,3: PRS output pulse and interrupt flag set on.." newline bitfld.long 0x00 24.--25. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 16.--19. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 12.--13. "CUFOA,Counter Underflow Output Action" "0: No action on counter underflow,1: Toggle output on counter underflow,2: Clear output on counter underflow,3: Set output on counter underflow" bitfld.long 0x00 10.--11. "COFOA,Counter Overflow Output Action" "0: No action on counter overflow,1: Toggle output on counter overflow,2: Clear output on counter overflow,3: Set output on counter overflow" newline bitfld.long 0x00 8.--9. "CMOA,Compare Match Output Action" "0: No action on compare match,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" bitfld.long 0x00 4. "COIST,Compare Output Initial State" "0,1" newline bitfld.long 0x00 2. "OUTINV,Output Invert" "0,1" bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,3: Pulse-Width Modulation" group.long 0x64++0x03 line.long 0x00 "CC0_CCV,CC Channel Value Register" hexmask.long 0x00 0.--31. 1. "CCV,CC Channel Value" rgroup.long 0x68++0x03 line.long 0x00 "CC0_CCVP,CC Channel Value Peek Register" hexmask.long 0x00 0.--31. 1. "CCVP,CC Channel Value Peek" group.long 0x6C++0x03 line.long 0x00 "CC0_CCVB,CC Channel Buffer Register" hexmask.long 0x00 0.--31. 1. "CCVB,CC Channel Value Buffer" group.long 0x70++0x03 line.long 0x00 "CC1_CTRL,CC Channel Control Register" bitfld.long 0x00 30. "FILT,Digital Filter" "0,1" bitfld.long 0x00 29. "INSEL,Input Selection" "0,1" newline bitfld.long 0x00 28. "PRSCONF,PRS Configuration" "0,1" bitfld.long 0x00 26.--27. "ICEVCTRL,Input Capture Event Control" "0: PRS output pulse and interrupt flag set on..,1: PRS output pulse and interrupt flag set on..,2: PRS output pulse and interrupt flag set on..,3: PRS output pulse and interrupt flag set on.." newline bitfld.long 0x00 24.--25. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 16.--19. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 12.--13. "CUFOA,Counter Underflow Output Action" "0: No action on counter underflow,1: Toggle output on counter underflow,2: Clear output on counter underflow,3: Set output on counter underflow" bitfld.long 0x00 10.--11. "COFOA,Counter Overflow Output Action" "0: No action on counter overflow,1: Toggle output on counter overflow,2: Clear output on counter overflow,3: Set output on counter overflow" newline bitfld.long 0x00 8.--9. "CMOA,Compare Match Output Action" "0: No action on compare match,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" bitfld.long 0x00 4. "COIST,Compare Output Initial State" "0,1" newline bitfld.long 0x00 2. "OUTINV,Output Invert" "0,1" bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,3: Pulse-Width Modulation" group.long 0x74++0x03 line.long 0x00 "CC1_CCV,CC Channel Value Register" hexmask.long 0x00 0.--31. 1. "CCV,CC Channel Value" rgroup.long 0x78++0x03 line.long 0x00 "CC1_CCVP,CC Channel Value Peek Register" hexmask.long 0x00 0.--31. 1. "CCVP,CC Channel Value Peek" group.long 0x7C++0x03 line.long 0x00 "CC1_CCVB,CC Channel Buffer Register" hexmask.long 0x00 0.--31. 1. "CCVB,CC Channel Value Buffer" group.long 0x80++0x03 line.long 0x00 "CC2_CTRL,CC Channel Control Register" bitfld.long 0x00 30. "FILT,Digital Filter" "0,1" bitfld.long 0x00 29. "INSEL,Input Selection" "0,1" newline bitfld.long 0x00 28. "PRSCONF,PRS Configuration" "0,1" bitfld.long 0x00 26.--27. "ICEVCTRL,Input Capture Event Control" "0: PRS output pulse and interrupt flag set on..,1: PRS output pulse and interrupt flag set on..,2: PRS output pulse and interrupt flag set on..,3: PRS output pulse and interrupt flag set on.." newline bitfld.long 0x00 24.--25. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 16.--19. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 12.--13. "CUFOA,Counter Underflow Output Action" "0: No action on counter underflow,1: Toggle output on counter underflow,2: Clear output on counter underflow,3: Set output on counter underflow" bitfld.long 0x00 10.--11. "COFOA,Counter Overflow Output Action" "0: No action on counter overflow,1: Toggle output on counter overflow,2: Clear output on counter overflow,3: Set output on counter overflow" newline bitfld.long 0x00 8.--9. "CMOA,Compare Match Output Action" "0: No action on compare match,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" bitfld.long 0x00 4. "COIST,Compare Output Initial State" "0,1" newline bitfld.long 0x00 2. "OUTINV,Output Invert" "0,1" bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,3: Pulse-Width Modulation" group.long 0x84++0x03 line.long 0x00 "CC2_CCV,CC Channel Value Register" hexmask.long 0x00 0.--31. 1. "CCV,CC Channel Value" rgroup.long 0x88++0x03 line.long 0x00 "CC2_CCVP,CC Channel Value Peek Register" hexmask.long 0x00 0.--31. 1. "CCVP,CC Channel Value Peek" group.long 0x8C++0x03 line.long 0x00 "CC2_CCVB,CC Channel Buffer Register" hexmask.long 0x00 0.--31. 1. "CCVB,CC Channel Value Buffer" group.long 0x90++0x03 line.long 0x00 "CC3_CTRL,CC Channel Control Register" bitfld.long 0x00 30. "FILT,Digital Filter" "0,1" bitfld.long 0x00 29. "INSEL,Input Selection" "0,1" newline bitfld.long 0x00 28. "PRSCONF,PRS Configuration" "0,1" bitfld.long 0x00 26.--27. "ICEVCTRL,Input Capture Event Control" "0: PRS output pulse and interrupt flag set on..,1: PRS output pulse and interrupt flag set on..,2: PRS output pulse and interrupt flag set on..,3: PRS output pulse and interrupt flag set on.." newline bitfld.long 0x00 24.--25. "ICEDGE,Input Capture Edge Select" "0: Rising edges detected,1: Falling edges detected,2: Both edges detected,3: No edge detection signal is left as it is" bitfld.long 0x00 16.--19. "PRSSEL,Compare/Capture Channel PRS Input Channel Selection" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 12.--13. "CUFOA,Counter Underflow Output Action" "0: No action on counter underflow,1: Toggle output on counter underflow,2: Clear output on counter underflow,3: Set output on counter underflow" bitfld.long 0x00 10.--11. "COFOA,Counter Overflow Output Action" "0: No action on counter overflow,1: Toggle output on counter overflow,2: Clear output on counter overflow,3: Set output on counter overflow" newline bitfld.long 0x00 8.--9. "CMOA,Compare Match Output Action" "0: No action on compare match,1: Toggle output on compare match,2: Clear output on compare match,3: Set output on compare match" bitfld.long 0x00 4. "COIST,Compare Output Initial State" "0,1" newline bitfld.long 0x00 2. "OUTINV,Output Invert" "0,1" bitfld.long 0x00 0.--1. "MODE,CC Channel Mode" "0: Compare/Capture channel turned off,1: Input capture,2: Output compare,3: Pulse-Width Modulation" group.long 0x94++0x03 line.long 0x00 "CC3_CCV,CC Channel Value Register" hexmask.long 0x00 0.--31. 1. "CCV,CC Channel Value" rgroup.long 0x98++0x03 line.long 0x00 "CC3_CCVP,CC Channel Value Peek Register" hexmask.long 0x00 0.--31. 1. "CCVP,CC Channel Value Peek" group.long 0x9C++0x03 line.long 0x00 "CC3_CCVB,CC Channel Buffer Register" hexmask.long 0x00 0.--31. 1. "CCVB,CC Channel Value Buffer" group.long 0xA0++0x03 line.long 0x00 "DTCTRL,DTI Control Register" bitfld.long 0x00 24. "DTPRSEN,DTI PRS Source Enable" "0,1" bitfld.long 0x00 10. "DTFATS,DTI Fault Action on Timer Stop" "0,1" newline bitfld.long 0x00 9. "DTAR,DTI Always Run" "0,1" bitfld.long 0x00 4.--7. "DTPRSSEL,DTI PRS Source Channel Select" "0: PRS Channel 0 selected as input,1: PRS Channel 1 selected as input,2: PRS Channel 2 selected as input,3: PRS Channel 3 selected as input,4: PRS Channel 4 selected as input,5: PRS Channel 5 selected as input,6: PRS Channel 6 selected as input,7: PRS Channel 7 selected as input,8: PRS Channel 8 selected as input,9: PRS Channel 9 selected as input,10: PRS Channel 10 selected as input,11: PRS Channel 11 selected as input,12: PRS Channel 12 selected as input,13: PRS Channel 13 selected as input,14: PRS Channel 14 selected as input,15: PRS Channel 15 selected as input" newline bitfld.long 0x00 3. "DTCINV,DTI Complementary Output Invert" "0,1" bitfld.long 0x00 2. "DTIPOL,DTI Inactive Polarity" "0,1" newline bitfld.long 0x00 1. "DTDAS,DTI Automatic Start-up Functionality" "0,1" bitfld.long 0x00 0. "DTEN,DTI Enable" "0,1" group.long 0xA4++0x03 line.long 0x00 "DTTIME,DTI Time Control Register" bitfld.long 0x00 16.--21. "DTFALLT,DTI Fall-time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8.--13. "DTRISET,DTI Rise-time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--3. "DTPRESC,DTI Prescaler Setting" "0: The HFPERCLK is undivided,1: The HFPERCLK is divided by 2,2: The HFPERCLK is divided by 4,3: The HFPERCLK is divided by 8,4: The HFPERCLK is divided by 16,5: The HFPERCLK is divided by 32,6: The HFPERCLK is divided by 64,7: The HFPERCLK is divided by 128,8: The HFPERCLK is divided by 256,9: The HFPERCLK is divided by 512,10: The HFPERCLK is divided by 1024,?..." group.long 0xA8++0x03 line.long 0x00 "DTFC,DTI Fault Configuration Register" bitfld.long 0x00 27. "DTLOCKUPFEN,DTI Lockup Fault Enable" "0,1" bitfld.long 0x00 26. "DTDBGFEN,DTI Debugger Fault Enable" "0,1" newline bitfld.long 0x00 25. "DTPRS1FEN,DTI PRS 1 Fault Enable" "0,1" bitfld.long 0x00 24. "DTPRS0FEN,DTI PRS 0 Fault Enable" "0,1" newline bitfld.long 0x00 16.--17. "DTFA,DTI Fault Action" "0: No action on fault,1: Set outputs inactive,2: Clear outputs,3: Tristate outputs" bitfld.long 0x00 8.--11. "DTPRS1FSEL,DTI PRS Fault Source 1 Select" "0: PRS Channel 0 selected as fault source 1,1: PRS Channel 1 selected as fault source 1,2: PRS Channel 2 selected as fault source 1,3: PRS Channel 3 selected as fault source 1,4: PRS Channel 4 selected as fault source 1,5: PRS Channel 5 selected as fault source 1,6: PRS Channel 6 selected as fault source 1,7: PRS Channel 7 selected as fault source 1,8: PRS Channel 8 selected as fault source 1,9: PRS Channel 9 selected as fault source 1,10: PRS Channel 10 selected as fault source 1,11: PRS Channel 11 selected as fault source 1,12: PRS Channel 12 selected as fault source 1,13: PRS Channel 13 selected as fault source 1,14: PRS Channel 14 selected as fault source 1,15: PRS Channel 15 selected as fault source 1" newline bitfld.long 0x00 0.--3. "DTPRS0FSEL,DTI PRS Fault Source 0 Select" "0: PRS Channel 0 selected as fault source 0,1: PRS Channel 1 selected as fault source 1,2: PRS Channel 2 selected as fault source 2,3: PRS Channel 3 selected as fault source 3,4: PRS Channel 4 selected as fault source 4,5: PRS Channel 5 selected as fault source 5,6: PRS Channel 6 selected as fault source 6,7: PRS Channel 7 selected as fault source 7,8: PRS Channel 8 selected as fault source 8,9: PRS Channel 9 selected as fault source 9,10: PRS Channel 10 selected as fault source 10,11: PRS Channel 11 selected as fault source 11,12: PRS Channel 12 selected as fault source 12,13: PRS Channel 13 selected as fault source 13,14: PRS Channel 14 selected as fault source 14,15: PRS Channel 15 selected as fault source 15" group.long 0xAC++0x03 line.long 0x00 "DTOGEN,DTI Output Generation Enable Register" bitfld.long 0x00 5. "DTOGCDTI2EN,DTI CDTI2 Output Generation Enable" "0,1" bitfld.long 0x00 4. "DTOGCDTI1EN,DTI CDTI1 Output Generation Enable" "0,1" newline bitfld.long 0x00 3. "DTOGCDTI0EN,DTI CDTI0 Output Generation Enable" "0,1" bitfld.long 0x00 2. "DTOGCC2EN,DTI CC2 Output Generation Enable" "0,1" newline bitfld.long 0x00 1. "DTOGCC1EN,DTI CC1 Output Generation Enable" "0,1" bitfld.long 0x00 0. "DTOGCC0EN,DTI CC0 Output Generation Enable" "0,1" rgroup.long 0xB0++0x03 line.long 0x00 "DTFAULT,DTI Fault Register" bitfld.long 0x00 3. "DTLOCKUPF,DTI Lockup Fault" "0,1" bitfld.long 0x00 2. "DTDBGF,DTI Debugger Fault" "0,1" newline bitfld.long 0x00 1. "DTPRS1F,DTI PRS 1 Fault" "0,1" bitfld.long 0x00 0. "DTPRS0F,DTI PRS 0 Fault" "0,1" wgroup.long 0xB4++0x03 line.long 0x00 "DTFAULTC,DTI Fault Clear Register" bitfld.long 0x00 3. "TLOCKUPFC,DTI Lockup Fault Clear" "0,1" bitfld.long 0x00 2. "DTDBGFC,DTI Debugger Fault Clear" "0,1" newline bitfld.long 0x00 1. "DTPRS1FC,DTI PRS1 Fault Clear" "0,1" bitfld.long 0x00 0. "DTPRS0FC,DTI PRS0 Fault Clear" "0,1" group.long 0xB8++0x03 line.long 0x00 "DTLOCK,DTI Configuration Lock Register" hexmask.long.word 0x00 0.--15. 1. "LOCKKEY,DTI Lock Key" tree.end repeat.end tree.end autoindent.off newline