; -------------------------------------------------------------------------------- ; @Title: ARM920 on chip peripherals ; @Props: ; @Author: - ; @Changelog: ; @Manufacturer: ; @Doc: ; @Core: ; @Chip: ; @Copyright: (C) 1989-2017 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: pera920t.per 16305 2023-06-28 11:47:37Z pegold $ config 16. 8. width 8. ASSERT VERSION.BUILD.BASE()>=80109. sif PER.isNOTIFICATION() base AVM:0x00000000 wgroup AVM:0x00++0 textline " Peripheral File Notification - " button "show missing files" "DIALOG.MESSAGE ""Please check your installation for the possibly missing files:""+CONV.CHAR(0xa)+PER.NOTIFICATION.MISSINGFILES()" textline " ---------------------------------------------------------------" textline " The peripheral file for this SoC cannot be displayed. " textline " Possible reasons are: " textline " - it is missing in the local installation or under development " textline " - it is confidential " textline " " textline " As fallback only the core registers are shown. " textline " Please check www.lauterbach.com/scripts.html " textline " or contact support@lauterbach.com . " textline " " endif width 8. tree "ID Registers" group c15:0x0000--0x0000 line.long 0x0 "MIDR,Identity Code" hexmask.long.byte 0x0 24.--31. 0x1 " IMPL ,Implementer" hexmask.long.byte 0x0 20.--23. 0x1 " SPEC ,Specification Revision" hexmask.long.byte 0x0 16.--19. 0x1 " ARCH ,Architecture Version" hexmask.long.word 0x0 4.--15. 0x1 " PARTNUM ,Part Number" hexmask.long.byte 0x0 0.--3. 0x01 " REV ,Layout Revision" group c15:0x0100--0x0100 line.long 0x0 "CTR,Cache Type" bitfld.long 0x0 25.--28. " CLASS ,Cache Class" "0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f" bitfld.long 0x0 24. " H ,Cache Havardness" "no,yes" textline " " bitfld.long 0x0 18.--21. " DSIZE ,Data Cache Size" "512,1k,2k,4k,8k,16k,32k,64k,128k,256k,512k,1M,2M,4M,8M,?..." bitfld.long 0x0 15.--17. " DASS ,Data Cache Associativity" "dir,2,4,8,16,32,64,128" bitfld.long 0x0 14. " DM ,Data Cache Multiplier Bit" "0,1" bitfld.long 0x0 12.--13. " DLENGTH ,Data Cache Line Length" "2,4,8,16" textline " " bitfld.long 0x0 6.--9. " ISIZE ,Instruction Cache Size" "512,1k,2k,4k,8k,16k,32k,64k,128k,256k,512k,1M,2M,4M,8M,?..." bitfld.long 0x0 3.--5. " IASS ,Instruction Cache Associativity" "dir,2,4,8,16,32,64,128" bitfld.long 0x0 2. " IM ,Instruction Cache Multiplier Bit" "0,1" bitfld.long 0x0 0.--1. " ILENGTH ,Instruction Cache Line Length" "2,4,8,16" tree.end tree "MMU Control and Configuration" width 8. group c15:0x1--0x1 line.long 0x0 "CR,Control Register" bitfld.long 0x0 31. " iA ,Asynchronous Clocking Select" "0,1" bitfld.long 0x0 30. " nF ,nFastBus Select" "0,1" bitfld.long 0x0 14. " RR ,Round Robin Replacement Strategy for ICache and DCache" "Random,Round robin" bitfld.long 0x0 13. " V ,Location of Exception Vectors" "0x00000000,0xFFFF0000" textline " " bitfld.long 0x0 12. " I ,Instruction Cache" "Disable,Enable" bitfld.long 0x0 9. " R ,ROM Protection" "Disable,Enable" bitfld.long 0x0 8. " S ,System Protection" "Disable,Enable" bitfld.long 0x0 7. " B ,Endianism" "Little,Big" textline " " bitfld.long 0x0 2. " C ,Data Cache" "Disable,Enable" bitfld.long 0x0 1. " A ,Alignment Fault Checking" "Disable,Enable" bitfld.long 0x0 0. " M ,MMU" "Disable,Enable" textline " " group c15:0x0002--0x0002 line.long 0x0 "TTBR,Translation Table Base Register" hexmask.long 0x0 14.--31. 0x4000 " TTBA ,Translation Table Base Address" textline " " group c15:0x3--0x3 line.long 0x0 "DACR,Domain Access Control Register" bitfld.long 0x0 30.--31. " D15 ,Domain Access 15" "Denied,Client,Reserved,Manager" bitfld.long 0x0 28.--29. " D14 ,Domain Access 14" "Denied,Client,Reserved,Manager" bitfld.long 0x0 26.--27. " D13 ,Domain Access 13" "Denied,Client,Reserved,Manager" bitfld.long 0x0 24.--25. " D12 ,Domain Access 12" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 22.--23. " D11 ,Domain Access 11" "Denied,Client,Reserved,Manager" bitfld.long 0x0 20.--21. " D10 ,Domain Access 10" "Denied,Client,Reserved,Manager" bitfld.long 0x0 18.--19. " D9 ,Domain Access 9" "Denied,Client,Reserved,Manager" bitfld.long 0x0 16.--17. " D8 ,Domain Access 8" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 14.--15. " D7 ,Domain Access 7" "Denied,Client,Reserved,Manager" bitfld.long 0x0 12.--13. " D6 ,Domain Access 6" "Denied,Client,Reserved,Manager" bitfld.long 0x0 10.--11. " D5 ,Domain Access 5" "Denied,Client,Reserved,Manager" bitfld.long 0x0 8.--9. " D4 ,Domain Access 4" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 6.--7. " D3 ,Domain Access 3" "Denied,Client,Reserved,Manager" bitfld.long 0x0 4.--5. " D2 ,Domain Access 2" "Denied,Client,Reserved,Manager" bitfld.long 0x0 2.--3. " D1 ,Domain Access 1" "Denied,Client,Reserved,Manager" bitfld.long 0x0 0.--1. " D0 ,Domain Access 0" "Denied,Client,Reserved,Manager" textline " " group c15:0x5--0x5 line.long 0x0 "DFSR,Data Fault Status Register" bitfld.long 0x0 0x4--0x7 " DOMAIN ,Domain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 0x0--0x3 " STATUS ,Status" "reserved,alignment,reserved,alignment,be_linef_sect,transl_sect,be_linef_page,transl_page,be_other_sect,domain_sect,be_other_page,domain_page,be_trans_l1,perm_sect,be_trans_l2,perm_page" group c15:0x105--0x105 line.long 0x0 "IFSR,Instruction Fault Status Register" bitfld.long 0x0 0x4--0x7 " DOMAIN ,Domain" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 0x0--0x3 " STATUS ,Status" "reserved,alignment,reserved,alignment,be_linef_sect,transl_sect,be_linef_page,transl_page,be_other_sect,domain_sect,be_other_page,domain_page,be_trans_l1,perm_sect,be_trans_l2,perm_page" group c15:0x6--0x6 line.long 0x0 "DFAR,Data Fault Address Register" group c15:0x106--0x106 line.long 0x0 "IFAR,Instruction Fault Address Register" textline " " group c15:0x000d--0x000d line.long 0x0 "FCSEPID,FCSE Process ID" tree.end tree "Cache Control and Configuration" group c15:0x9--0x9 line.long 0x0 "DCACHE,Data Cache Lockdown" group c15:0x109--0x109 line.long 0x0 "ICACHE,Instruction Cache Lockdown" group c15:0x11d--0x11d line.long 0x0 "ICINDEX,Instruction Cache Index" group c15:0x11e--0x11e line.long 0x0 "DCINDEX,Data Cache Index" group c15:0x0f--0x0f line.long 0x0 "TEST,Test State" tree.end tree "ICEbreaker" width 8. group ice:0x0--0x5 "Debug Control" line.long 0x0 "DBGCTRL,Debug Control Register" bitfld.long 0x0 0x5 " ICE ,EmbeddedICE Disable" "enabled,disabled" bitfld.long 0x0 0x4 " MONITOR ,Monitor Mode Enable" "disabled,enabled" textline " " bitfld.long 0x0 0x3 " STEP ,Single Step" "disabled,enabled" bitfld.long 0x0 0x2 " INTDIS ,Interrupts Disable" "enabled,disabled" bitfld.long 0x0 0x1 " DBGRQ ,Debug Request" "no,yes" bitfld.long 0x0 0x0 " DBGACK ,Debug Acknowledge" "no,yes" line.long 0x4 "DBGSTAT,Debug Status Register" bitfld.long 0x4 0x4 " ITBIT ,ITBIT" "0,1" bitfld.long 0x4 0x3 " SYSCOMP ,SYSCOMP" "0,1" bitfld.long 0x4 0x2 " IFEN ,Interrupts Enable" "disabled,enabled" bitfld.long 0x4 0x1 " DBGRQ ,Debug Request" "no,yes" bitfld.long 0x4 0x0 " DBGACK ,Debug Acknowledge" "no,yes" line.long 0x8 "VECTOR,Vector Catch Register" bitfld.long 0x8 0x7 " FIQ ,FIQ" "dis,ena" bitfld.long 0x8 0x6 " IRQ ,IRQ" "dis,ena" bitfld.long 0x8 0x4 " D_ABO ,D_ABORT" "dis,ena" bitfld.long 0x8 0x3 " P_ABO ,P_ABORT" "dis,ena" bitfld.long 0x8 0x2 " SWI ,SWI" "dis,ena" bitfld.long 0x8 0x1 " UND ,UNDEF" "dis,ena" bitfld.long 0x8 0x0 " RES ,RESET" "dis,ena" line.long 0x10 "COMCTRL,Debug Communication Control Register" bitfld.long 0x10 28.--31. " VERSION ,Version Number" "0000,0001,0010,0011,0100,0101,0110,0111,1000,1001,1010,1011,1100,1101,1110,1111" bitfld.long 0x10 0x1 " WRITE ,Write Register Free" "idle,pend" bitfld.long 0x10 0x0 " READ ,Read Register Free" "idle,pend" line.long 0x14 "COMDATA,Debug Communication Data Register" group ice:0x8--0x0d "Watchpoint 0" line.long 0x0 "AV,Address Value" line.long 0x4 "AM,Address Mask" line.long 0x8 "DV,Data Value" line.long 0x0c "DM,Data Mask" line.long 0x10 "CV,Control Value" bitfld.long 0x10 0x8 " ENABLE ,Global Enable for Watchpoint 1" "DIS,ENA" bitfld.long 0x10 0x7 " RANGE ,Assert RANGEOUT Signal" "0 ,1" bitfld.long 0x10 0x6 " CHAIN ,Connect to Watchpoint 0" "0 ,1" bitfld.long 0x10 0x5 " EXTERN ,Depentend from EXTERN Signal" "0 ,1" bitfld.long 0x10 0x4 " nTRANS ,CPU Mode" "User,no User" bitfld.long 0x10 0x3 " nOPC ,Op Fetch" "Inst,Data" bitfld.long 0x10 0x1--0x2 " MAS ,Access Size" "Byte,Word,Long,Res" bitfld.long 0x10 0x0 " nRW ,Read/Write" "R ,W" line.long 0x14 "CM,Control Mask" bitfld.long 0x14 0x7 " RANGE ,Assert RANGEOUT Signal" "ENA,DIS" bitfld.long 0x14 0x6 " CHAIN ,Connect to Watchpoint 0" "ENA,DIS" bitfld.long 0x14 0x5 " EXTERN ,Depentend from EXTERN Signal" "ENA,DIS" bitfld.long 0x14 0x4 " nTRANS ,CPU Mode" "ENA,DIS " bitfld.long 0x14 0x3 " nOPC ,Op Fetch" "ENA ,DIS" bitfld.long 0x14 0x1--0x2 " MAS ,Access Size" "ENA ,Res,Res,DIS" bitfld.long 0x14 0x0 " nRW ,Read/Write" "ENA,DIS" group ice:0x10--0x15 "Watchpoint 1" line.long 0x0 "AV,Address Value" line.long 0x4 "AM,Address Mask" line.long 0x8 "DV,Data Value" line.long 0x0c "DM,Data Mask" line.long 0x10 "CV,Control Value" bitfld.long 0x10 0x8 " ENABLE ,Global Enable for Watchpoint 1" "DIS,ENA" bitfld.long 0x10 0x7 " RANGE ,Assert RANGEOUT Signal" "0 ,1" bitfld.long 0x10 0x6 " CHAIN ,Connect to Watchpoint 0" "0 ,1" bitfld.long 0x10 0x5 " EXTERN ,Depentend from EXTERN Signal" "0 ,1" bitfld.long 0x10 0x4 " nTRANS ,CPU Mode" "User,no User" bitfld.long 0x10 0x3 " nOPC ,Op Fetch" "Inst,Data" bitfld.long 0x10 0x1--0x2 " MAS ,Access Size" "Byte,Word,Long,Res" bitfld.long 0x10 0x0 " nRW ,Read/Write" "R ,w" line.long 0x14 "CM,Control Mask" bitfld.long 0x14 0x7 " RANGE ,Assert RANGEOUT Signal" "ENA,DIS" bitfld.long 0x14 0x6 " CHAIN ,Connect to Watchpoint 0" "ENA,DIS" bitfld.long 0x14 0x5 " EXTERN ,Depentend from EXTERN Signal" "ENA,DIS" bitfld.long 0x14 0x4 " nTRANS ,CPU Mode" "ENA,DIS " bitfld.long 0x14 0x3 " nOPC ,Op Fetch" "ENA ,DIS" bitfld.long 0x14 0x1--0x2 " MAS ,Access Size" "ENA ,Res,Res,DIS" bitfld.long 0x14 0x0 " nRW ,Read/Write" "ENA,DIS" tree.end textline ""