; -------------------------------------------------------------------------------- ; @Title: JanusII on chip peripherals ; @Props: ; @Author: - ; @Changelog: ; @Manufacturer: ; @Doc: ; @Core: ; @Chiplist: JANUS2 ; @Copyright: (C) 1989-2014 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: perjanus.per 16305 2023-06-28 11:47:37Z pegold $ config 16. 8. width 8. ASSERT VERSION.BUILD.BASE()>=80109. sif PER.isNOTIFICATION() base AVM:0x00000000 wgroup AVM:0x00++0 textline " Peripheral File Notification - " button "show missing files" "DIALOG.MESSAGE ""Please check your installation for the possibly missing files:""+CONV.CHAR(0xa)+PER.NOTIFICATION.MISSINGFILES()" textline " ---------------------------------------------------------------" textline " The peripheral file for this SoC cannot be displayed. " textline " Possible reasons are: " textline " - it is missing in the local installation or under development " textline " - it is confidential " textline " " textline " As fallback only the core registers are shown. " textline " Please check www.lauterbach.com/scripts.html " textline " or contact support@lauterbach.com . " textline " " endif ;begin include file arm/mmujanus.ph ;parameters: group c15:0x0--0x0 "CP15" line.long 0x0 "ID,ID Register" hexmask.word 0x0 4.--15. 0x1 "ID ,Processor Identification" bitfld.long 0x0 0.--3. " REV ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group c15:0x1--0x1 line.long 0x0 "CONTROL,Cache Control Register" bitfld.long 0x0 28.--29. "BANK ,Cache Bank Select Register" "0,1,2,3" bitfld.long 0x0 27. " F ,Load Mode" "off,on" bitfld.long 0x0 25.--26. " LOCK ,Lock Cache Lockdown Control Register" "0,1,2,3" bitfld.long 0x0 24. " S ,Split Instruction Data Mode" "off,on" bitfld.long 0x0 0x7 " B ,Endianism" "little,big" bitfld.long 0x0 0x3 " W ,Write Buffer" "dis,ena" bitfld.long 0x0 0x2 " C ,Cache" "dis,ena" bitfld.long 0x0 0x0 " M ,Protection Unit" "dis,ena" group c15:0x6--0x6 line.long 0x0 "AREA0,Memory Area No.0 Definition" hexmask.long 0x0 12.--31. 0x1000 "BASE ,Area No.0 Base Address" bitfld.long 0x0 9.--10. " PROT ,Area No.0 Access Permission" "S:no U:no ,S:r/w U:no ,S:r/w U:r ,S:r/w U:r/w" bitfld.long 0x0 0x8 " B ,Bufferable Bit of Area No.0" "no,yes" bitfld.long 0x0 0x7 " C ,Cacheable Bit of Area No.0" "no,yes" bitfld.long 0x0 0x1--0x5 " SIZE ,Size of the Area No.0" "res,res,res,res,res,res,res,res,res,res,res,4kB,res,16kB,res,64kB,res,256kB,res,res,2MB,res,res,16MB,res,64MB,res,256MB,res,res,res,4GB" bitfld.long 0x0 0x0 " E ,Enable Bit of Area No.0" "dis,ena" group c15:0x16--0x16 line.long 0x0 "AREA1,Memory Area No.1 Definition" hexmask.long 0x0 12.--31. 0x1000 "BASE ,Area No.1 Base Address" bitfld.long 0x0 9.--10. " PROT ,Area No.1 Access Permission" "S:no U:no ,S:r/w U:no ,S:r/w U:r ,S:r/w U:r/w" bitfld.long 0x0 0x8 " B ,Bufferable Bit of Area No.1" "no,yes" bitfld.long 0x0 0x7 " C ,Cacheable Bit of Area No.1" "no,yes" bitfld.long 0x0 0x1--0x5 " SIZE ,Size of the Area No.1" "res,res,res,res,res,res,res,res,res,res,res,4kB,res,16kB,res,64kB,res,256kB,res,res,2MB,res,res,16MB,res,64MB,res,256MB,res,res,res,4GB" bitfld.long 0x0 0x0 " E ,Enable Bit of Area No.1" "dis,ena" group c15:0x26--0x26 line.long 0x0 "AREA2,Memory Area No.2 Definition" hexmask.long 0x0 12.--31. 0x1000 "BASE ,Area No.2 Base Address" bitfld.long 0x0 9.--10. " PROT ,Area No.2 Access Permission" "S:no U:no ,S:r/w U:no ,S:r/w U:r ,S:r/w U:r/w" bitfld.long 0x0 0x8 " B ,Bufferable Bit of Area No.2" "no,yes" bitfld.long 0x0 0x7 " C ,Cacheable Bit of Area No.2" "no,yes" bitfld.long 0x0 0x1--0x5 " SIZE ,Size of the Area No.2" "res,res,res,res,res,res,res,res,res,res,res,4kB,res,16kB,res,64kB,res,256kB,res,res,2MB,res,res,16MB,res,64MB,res,256MB,res,res,res,4GB" bitfld.long 0x0 0x0 " E ,Enable Bit of Area No.2" "dis,ena" group c15:0x36--0x36 line.long 0x0 "AREA3,Memory Area No.3 Definition" hexmask.long 0x0 12.--31. 0x1000 "BASE ,Area No.3 Base Address" bitfld.long 0x0 9.--10. " PROT ,Area No.3 Access Permission" "S:no U:no ,S:r/w U:no ,S:r/w U:r ,S:r/w U:r/w" bitfld.long 0x0 0x8 " B ,Bufferable Bit of Area No.3" "no,yes" bitfld.long 0x0 0x7 " C ,Cacheable Bit of Area No.3" "no,yes" bitfld.long 0x0 0x1--0x5 " SIZE ,Size of the Area No.3" "res,res,res,res,res,res,res,res,res,res,res,4kB,res,16kB,res,64kB,res,256kB,res,res,2MB,res,res,16MB,res,64MB,res,256MB,res,res,res,4GB" bitfld.long 0x0 0x0 " E ,Enable Bit of Area No.3" "dis,ena" group c15:0x7--0x7 hide.long 0x0 "FLUSH,Flush unlocked Cache banks" ;end include file arm/mmujanus.ph ;begin include file arm/icebreaker.ph ;parameters: tree "ICEBreaker" group ice:0x8--0x8 "Watchpoint 0" line.long 0x0 "AV,Address Value" group ice:0x9--0x9 line.long 0x0 "AM,Address Mask" group ice:0x0a--0x0a line.long 0x0 "DV,Data Value" group ice:0x0b--0x0b line.long 0x0 "DM,Data Mask" group ice:0x0c--0x0c line.long 0x0 "CV,Control Value" bitfld.long 0x0 0x8 "ENABLE ,Global Enable for Watchpoint 1" "DIS,ENA" bitfld.long 0x0 0x7 " RANGE ,Assert RANGEOUT Signal" "0 ,1" bitfld.long 0x0 0x6 " CHAIN ,Connect to Watchpoint 0" "0 ,1" bitfld.long 0x0 0x5 " EXTERN ,Depentend from EXTERN Signal" "0 ,1" bitfld.long 0x0 0x4 " nTRANS ,CPU Mode" "User,notU" bitfld.long 0x0 0x3 " nOPC ,Op Fetch" "Inst,Data" bitfld.long 0x0 0x1--0x2 " MAS ,Access Size" "Byte,Word,Long,Res" bitfld.long 0x0 0x0 " nRW ,Read/Write" "R ,W" group ice:0x0d--0x0d line.long 0x0 "CM,Control Mask" bitfld.long 0x0 0x7 " RANGE ,Assert RANGEOUT Signal" "ENA,DIS" bitfld.long 0x0 0x6 " CHAIN ,Connect to Watchpoint 0" "ENA,DIS" bitfld.long 0x0 0x5 " EXTERN ,Depentend from EXTERN Signal" "ENA,DIS" bitfld.long 0x0 0x4 " nTRANS ,CPU Mode" "ENA ,DIS" bitfld.long 0x0 0x3 " nOPC ,Op Fetch" "ENA ,DIS" bitfld.long 0x0 0x1--0x2 " MAS ,Access Size" "ENA ,Res,Res,DIS" bitfld.long 0x0 0x0 " nRW ,Read/Write" "ENA,DIS" group ice:0x10--0x10 "Watchpoint 1" line.long 0x0 "AV,Address Value" group ice:0x11--0x11 line.long 0x0 "AM,Address Mask" group ice:0x12--0x12 line.long 0x0 "DV,Data Value" group ice:0x13--0x13 line.long 0x0 "DM,Data Mask" group ice:0x14--0x14 line.long 0x0 "CV,Control Value" bitfld.long 0x0 0x8 "ENABLE ,Global Enable for Watchpoint 1" "DIS,ENA" bitfld.long 0x0 0x7 " RANGE ,Assert RANGEOUT Signal" "0 ,1" bitfld.long 0x0 0x6 " CHAIN ,Connect to Watchpoint 0" "0 ,1" bitfld.long 0x0 0x5 " EXTERN ,Depentend from EXTERN Signal" "0 ,1" bitfld.long 0x0 0x4 " nTRANS ,CPU Mode" "User,notU" bitfld.long 0x0 0x3 " nOPC ,Op Fetch" "Inst,Data" bitfld.long 0x0 0x1--0x2 " MAS ,Access Size" "Byte,Word,Long,Res" bitfld.long 0x0 0x0 " nRW ,Read/Write" "R ,W" group ice:0x15--0x15 line.long 0x0 "CM,Control Mask" bitfld.long 0x0 0x7 " RANGE ,Assert RANGEOUT Signal" "ENA,DIS" bitfld.long 0x0 0x6 " CHAIN ,Connect to Watchpoint 0" "ENA,DIS" bitfld.long 0x0 0x5 " EXTERN ,Depentend from EXTERN Signal" "ENA,DIS" bitfld.long 0x0 0x4 " nTRANS ,CPU Mode" "ENA ,DIS" bitfld.long 0x0 0x3 " nOPC ,Op Fetch" "ENA ,DIS" bitfld.long 0x0 0x1--0x2 " MAS ,Access Size" "ENA ,Res,Res,DIS" bitfld.long 0x0 0x0 " nRW ,Read/Write" "ENA,DIS" tree.end ;end include file arm/icebreaker.ph