; -------------------------------------------------------------------------------- ; @Title: ADSP-SC58x On-Chip Peripherals ; @Props: Released ; @Author: KRZ ; @Changelog: 2022-09-20 ; @Manufacturer: Analog Devices ; @Doc: XML generated (BLACKFINXML 1.2), based on: ADSP-SC584-registers.xml, ; ADSP-SC587-registers.xml, ; ADSP-SC589-registers.xml ; @Core: Cortex-A5 ; @Chip: ADSP-SC582, ADSP-SC583, ADSP-SC583W, ADSP-SC584, ADSP-SC584W, ; ADSP-SC587, ADSP-SC587W, ADSP-SC589 ; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only ; -------------------------------------------------------------------------------- ; $Id: peradspsc58x.per 15242 2022-09-20 16:38:14Z kwisniewski $ config 16. 8. tree "Core Registers (Cortex-A5)" width 0x8 ; -------------------------------------------------------------------------------- ; Identification registers ; -------------------------------------------------------------------------------- tree "ID Registers" rgroup.long c15:0x0++0x0 line.long 0x0 "MIDR,Main ID Register" hexmask.long.byte 0x0 24.--31. 0x1 " IMPL ,Implementer code" bitfld.long 0x0 20.--23. " VAR ,Variant" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 16.--19. " ARCH , Architecture" "Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,Pre-ARMv7,ARMv7" textline " " hexmask.long.word 0x0 4.--15. 0x1 " PART ,Primary Part Number" bitfld.long 0x0 0.--3. " REV ,Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.long c15:0x100++0x0 line.long 0x0 "CTR,Cache Type Register" bitfld.long 0x0 29.--31. " FORMAT ,Format" "Not ARMv7,Not ARMv7,Not ARMv7,Not ARMv7,ARMv7,Not ARMv7,Not ARMv7,Not ARMv7" bitfld.long 0x0 24.--27. " CWG ,Cache Writeback Granule" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x0 20.--23. " ERG ,Exclusives Reservation Granule" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 16.--19. " DMINLINE ,D-Cache Minimum Line Size" "1 word,2 words,4 words,8 words,16 words,32 words,64 words,128 words,256 words,512 words,1024 words,2048 words,4096 words,8192 words,16384 words,32768 words" textline " " bitfld.long 0x0 14.--15. " L1POLICY ,L1 Instruction cache policy" "Reserved,ASID,Virtual,Physical" bitfld.long 0x0 0.--3. " IMINLINE ,I-Cache Minimum Line Size" "1 word,2 words,4 words,8 words,16 words,32 words,64 words,128 words,256 words,512 words,1024 words,2048 words,4096 words,8192 words,16384 words,32768 words" rgroup.long c15:0x200++0x0 line.long 0x0 "TCMTR,Tighly-Coupled Memory Type Register" rgroup.long c15:0x300++0x0 line.long 0x0 "TLBTR,TLB Type Register" hexmask.long.byte 0x0 16.--23. 0x1 " ILSIZE ,Specifies the number of instruction TLB lockable entries" hexmask.long.byte 0x0 8.--15. 0x1 " DLSIZE ,Specifies the number of unified or data TLB lockable entries" bitfld.long 0x0 1. " TLB_SIZE ,TLB Size" "64,128" textline " " bitfld.long 0x0 0. " NU ,Unified or Separate TLBs" "Unified,Separate" rgroup.long c15:0x500++0x0 line.long 0x0 "MPIDR,Multiprocessor Affinity Register" bitfld.long 0x00 30. " U ,Processor is part of a multiprocessor or uniprocessor system" "Multiprocessor,Uniprocessor" bitfld.long 0x00 8.--11. " CLUSTERID ,Value read in CLUSTERID configuration pins" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--1. " CPUID ,Value depends on the number of configured CPUs" "0,1,2,3" rgroup.long c15:0x0410++0x00 line.long 0x00 "MMFR0,Memory Model Feature Register 0" bitfld.long 0x00 24.--27. " FCSE ,Fast Context Switch Memory Mappings Support" "Not supported,?..." bitfld.long 0x00 20.--23. " ACR ,Auxiliary Control Register Support" "Reserved,Supported,?..." bitfld.long 0x00 16.--19. " TCM ,TCM and Associated DMA Support" "Not supported,?..." textline " " bitfld.long 0x00 12.--15. " OSS ,Outer Shareable Support" "Not supported,?..." bitfld.long 0x00 8.--11. " CC_CPUA ,Cache Coherency Support" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. " PMSA ,Physical Memory System Architecture (PMSA) Support" "Not supported,?..." textline " " bitfld.long 0x00 0.--3. " VMSA ,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Supported,?..." rgroup.long c15:0x0510++0x00 line.long 0x00 "MMFR1,Memory Model Feature Register 1" bitfld.long 0x00 28.--31. " BTB ,Branch Predictor" "Reserved,Reserved,Required,?..." bitfld.long 0x00 24.--27. " L1TCO ,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 20.--23. " L1UCMO ,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 16.--19. " L1HCMO ,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 12.--15. " L1UCLMOSW ,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. " L1HCLMOSW ,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 4.--7. " L1UCLMOMVA ,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 0.--3. " L1HCLMOMVA ,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..." rgroup.long c15:0x0610++0x00 line.long 0x00 "MMFR2,Memory Model Feature Register 2" bitfld.long 0x00 28.--31. " HAF ,Hardware Access Flag Support" "Not supported,?..." bitfld.long 0x00 24.--27. " WFI ,Wait for Interrupt Stalling Support" "Reserved,Supported,?..." bitfld.long 0x00 20.--23. " MBF ,Memory Barrier Operations Support" "Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 16.--19. " UTLBMO ,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 12.--15. " HTLBMO ,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. " HL1CMRO ,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 4.--7. " HL1BPCRO ,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 0.--3. " HL1FPCRO ,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." rgroup.long c15:0x0710++0x00 line.long 0x00 "MMFR3,Memory Model Feature Register 3" bitfld.long 0x00 28.--31. " SS ,Supersection support" "Supported,?..." bitfld.long 0x00 20.--23. " CW ,Coherent walk" "Supported,?..." bitfld.long 0x00 12.--15. " MB ,Invalidate broadcast Support" "Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 8.--11. " BPM ,Invalidate Branch predictor Support" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. " HCMOSW ,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. " HCMOMVA ,Invalidate Cache MVA Support" "Reserved,Supported,?..." rgroup.long c15:0x0020++0x00 line.long 0x00 "ISAR0,Instruction Set Attribute Register 0" bitfld.long 0x00 24.--27. " DIVI ,Divide Instructions Support" "Not supported,?..." bitfld.long 0x00 20.--23. " DEBI ,Debug Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 16.--19. " CI ,Coprocessor Instructions Support" "Not supported,?..." textline " " bitfld.long 0x00 12.--15. " CBI ,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. " BI ,Bitfield Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. " BCI ,Bit Counting Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 0.--3. " SI ,Swap Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0120++0x00 line.long 0x00 "ISAR1,Instruction Set Attribute Register 1" bitfld.long 0x00 28.--31. " JI ,Jazelle Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 24.--27. " INTI ,Instructions That Branch Between ARM and Thumb Code Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 20.--23. " IMMI ,Immediate Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 16.--19. " ITEI ,If Then Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. " EXTI ,Extend Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. " E2I ,Exception 2 Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " E1I ,Exception 1 Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. " ENDI ,Endianness Control Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0220++0x00 line.long 0x00 "ISAR2,Instruction Set Attribute Register 2" bitfld.long 0x00 28.--31. " RI ,Reversal Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 24.--27. " PSRI ,PSR Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 20.--23. " UMI ,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 16.--19. " SMI ,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 12.--15. " MI ,Multiply Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. " II ,Multi-Access Interruptible Instructions Support" "Not supported,?..." textline " " bitfld.long 0x00 4.--7. " MHI ,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " LSI ,Load and Store Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0320++0x00 line.long 0x00 "ISAR3,Instruction Set Attribute Register 3" bitfld.long 0x00 28.--31. " T2E ,Thumb-2 Extensions Support" "Reserved,Supported,?..." bitfld.long 0x00 24.--27. " NOPI ,True NOP Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 20.--23. " TCI ,Thumb Copy Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 16.--19. " TBI ,Table Branch Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. " SPI ,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. " SVCI ,SVC Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " SIMDI ,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " SI ,Saturate Instructions Support" "Reserved,Supported,?..." rgroup.long c15:0x0420++0x00 line.long 0x00 "ISAR4,Instruction Set Attribute Register 4" bitfld.long 0x00 28.--31. " SWP_FRAC ,SWAP_frac" "Supported,?..." bitfld.long 0x00 24.--27. " PSR_M_I ,PSR_M Instructions Support" "Not supported,?..." bitfld.long 0x00 20.--23. " SPRI ,Synchronization Primitive instructions" "Not supported,?..." textline " " bitfld.long 0x00 16.--19. " BI ,Barrier Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. " SMCI ,SMC Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. " WBI ,Write-Back Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " WSI ,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " UI ,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..." rgroup.long c15:0x0520++0x00 line.long 0x00 "ISAR5,Instruction Set Attribute Registers 5 (Reserved)" rgroup.long c15:0x0620++0x00 line.long 0x00 "ISAR6,Instruction Set Attribute Registers 6 (Reserved)" rgroup.long c15:0x0720++0x00 line.long 0x00 "ISAR7,Instruction Set Attribute Registers 7 (Reserved)" rgroup.long c15:0x0010++0x00 line.long 0x00 "PFR0,Processor Feature Register 0" bitfld.long 0x00 12.--15. " STATE3 ,Thumb-2 Execution Environment (Thumb-2EE) Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. " STATE2 ,Java Extension Interface Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 4.--7. " STATE1 ,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 0.--3. " STATE0 ,ARM Instruction Set Support" "Reserved,Supported,?..." rgroup.long c15:0x0110++0x00 line.long 0x00 "PFR1,Processor Feature Register 1" bitfld.long 0x00 8.--11. " MPM ,Microcontroller Programmer's Model Support" "Not supported,?..." bitfld.long 0x00 4.--7. " SE ,Security Extensions Architecture v1 Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. " PM ,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..." rgroup.long c15:0x0210++0x00 line.long 0x00 "DFR0,Debug Feature Register 0" bitfld.long 0x00 20.--23. " MDM_MM ,Microcontroller Debug Model Support" "Not supported,?..." bitfld.long 0x00 16.--19. " TDM_MM ,Trace Debug Model (Memory-Mapped) Support" "Reserved,Supported,?..." bitfld.long 0x00 12.--15. " TDM_CB ,Coprocessor-Based Trace Debug Model Support" "Not supported,?..." textline " " bitfld.long 0x00 8.--11. " CDM_MM ,Memory-Mapped Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 4.--7. " SDM_CB ,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " CDM_CB ,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." rgroup.long c15:0x0310++0x00 line.long 0x00 "AFR0,Auxiliary Feature Register 0" hexmask.long 0x00 0.--31. 1. " AF ,Auxiliary Feature" tree.end width 0x8 tree "System Control and Configuration" group.long c15:0x1++0x0 line.long 0x0 "SCTLR,Control Register" bitfld.long 0x0 30. " TE ,Thumb exception enable" "ARM,Thumb" bitfld.long 0x0 29. " AFE ,Access Flag Enable" "Disabled,Enabled" bitfld.long 0x0 28. " TRE ,TEX remap enable" "Disabled,Enabled" textline " " bitfld.long 0x0 27. " NMFI ,DNonmaskable Fast Interrupt enable" "Disabled,Enabled" bitfld.long 0x0 25. " EE ,Exception endianess" "Little,Big" bitfld.long 0x0 14. " RR ,Replacement strategy for caches, BTAC, and micro TLBs" "Random,Round robin" textline " " bitfld.long 0x0 13. " V ,Base Location of Exception Registers" "0x00000000,0xFFFF0000" bitfld.long 0x0 12. " I ,Instruction Cache Enable" "Disabled,Enabled" bitfld.long 0x0 11. " Z ,Branch Prediction Enable" "Disabled,Enabled" textline " " bitfld.long 0x0 10. " SW ,SWP/SWPB Enable" "Disabled,Enabled" bitfld.long 0x0 2. " C ,Enable unified cache or data cache" "Disabled,Enabled" bitfld.long 0x0 1. " A ,Strict Alignment" "Disabled,Enabled" textline " " bitfld.long 0x0 0. " M ,MMU or Protection Unit" "Disabled,Enabled" group.long c15:0x101++0x0 line.long 0x0 "ACTLR,Auxiliary Control Register" bitfld.long 0x00 28. " DBDI ,Disable branch dual issue" "No,Yes" bitfld.long 0x00 18. " BTDIS ,Disable indirect Branch Target Address Cache" "No,Yes" bitfld.long 0x00 17. " RSDIS ,Disable return stack operation" "No,Yes" textline " " bitfld.long 0x00 15.--16. " BP ,Branch prediction policy" "Normal,Taken,Not taken,?..." bitfld.long 0x00 13.--14. " L1PCTL ,L1 Data prefetch control" "Disabled,1 prefetch,2 prefetches,3 prefetches" bitfld.long 0x00 12. " RADIS ,Disable Data Cache read-allocate mode" "No,Yes" textline " " bitfld.long 0x00 11. " DWBST ,Disable data write bursts to normal non-cacheable memory" "No,Yes" bitfld.long 0x00 10. " DODMBS ,Disable optimized Data Memory Barrier behavior" "No,Yes" bitfld.long 0x00 7. " EXCL ,Exclusive L1/L2 cache control" "Disabled,Enabled" textline " " bitfld.long 0x00 6. " SMP ,Data requests with Inner Cacheable Shared attributes are treated as cacheable" "Disabled,Enabled" bitfld.long 0x00 0. " FW ,FW" "Low,High" group.long c15:0x201++0x0 line.long 0x0 "CPACR,Coprocessor Access Control Register" bitfld.long 0x0 31. " ASEDIS ,Disable Advanced SIMD Extension functionality" "No,Yes" bitfld.long 0x0 30. " D32DIS ,Disable use of D16-D31 of the VFP register file" "No,Yes" bitfld.long 0x0 22.--23. " CP11 ,Coprocesor access control" "Denied,Privileged,Reserved,Full" textline " " bitfld.long 0x0 20.--21. " CP10 ,Coprocesor access control" "Denied,Privileged,Reserved,Full" textline " " group.long c15:0x11++0x0 line.long 0x0 "SCR,Secure Configuration Register" bitfld.long 0x00 6. " NET ,Not early termination" "Not early,Early" bitfld.long 0x00 5. " AW ,Controls whether the Non-secure world can modify the A-bit in the CPSR" "Not allowed,Allowed" bitfld.long 0x00 4. " FW ,FW-bit controls whether the Non-secure world can modify the F-bit in the CPSR" "Not allowed,Allowed" textline " " bitfld.long 0x00 3. " EA ,External Abort exceptions handled in Abort mode or Monitor mode" "Abort,Monitor" bitfld.long 0x00 2. " FIQ ,FIQ exceptions handled in Abort mode or Monitor mode" "FIQ,Monitor" bitfld.long 0x00 1. " IRQ ,IRQ exceptions handled in Abort mode or Monitor mode" "IRQ,Monitor" textline " " bitfld.long 0x00 0. " NS ,Secure mode " "Secure,Non-secure" group.long c15:0x111++0x0 line.long 0x0 "SDER,Secure Debug Enable Register" bitfld.long 0x00 1. " SUNIDEN ,Non-Invasive Secure User Debug Enable bit" "Denied,Permitted" bitfld.long 0x00 0. " SUIDEN ,Invasive Secure User Debug Enable bit" "Denied,Permitted" group.long c15:0x0211++0x00 line.long 0x00 "NSACR,Non-Secure Access Control Register" bitfld.long 0x00 18. " NS_SMP ,Determines if the SMP bit of the Auxiliary Control Register is writable in Non-secure state" "Disabled,Enabled" bitfld.long 0x00 17. " TL ,Lockable Page Table Entries Allocation in Nonsecure World" "Denied,Permitted" bitfld.long 0x00 15. " NSASEDIS ,Disable Non-secure Advanced SIMD Extension functionality" "Denied,Permitted" textline " " bitfld.long 0x00 14. " NSD32DIS ,Disable the Non-secure use of D16-D31 of the VFP register" "Denied,Permitted" bitfld.long 0x00 11. " CP11 ,Coprocessor 11 in the Nonsecure World Access Permission" "Denied,Permitted" bitfld.long 0x00 10. " CP10 ,Coprocessor 10 in the Nonsecure World Access Permission" "Denied,Permitted" group.long c15:0x0311++0x00 line.long 0x00 "VCR,Virtualization Control Register" bitfld.long 0x00 8. " AMO ,Abort Mask Override" "0,1" bitfld.long 0x00 7. " IMO ,IRQ Mask Override" "0,1" bitfld.long 0x00 6. " IFO ,FIQ Mask Override" "0,1" textline " " group.long c15:0x000c++0x00 line.long 0x00 "VBAR,Secure or Nonsecure Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 " VBA ,Base Address" group.long c15:0x10c++0x00 line.long 0x0 "MVBAR,Monitor Vector Base Address Register" hexmask.long 0x00 5.--31. 0x20 " MVBA , Monitor Vector Base Address" rgroup.long c15:0x1C++0x0 line.long 0x0 "ISR,Interrupt status Register" bitfld.long 0x0 8. " A ,Pending External Abort" "Not pending,Pending" bitfld.long 0x0 7. " I ,Pending IRQ" "Not pending,Pending" bitfld.long 0x0 6. " F ,Pending FIQ" "Not pending,Pending" group.long c15:0x11c++0x0 line.long 0x00 "VIR,Virtualization Interrupt Register" bitfld.long 0x00 8. " VA ,Virtual Abort" "0,1" bitfld.long 0x00 7. " VI ,Virtual IRQ" "0,1" bitfld.long 0x00 6. " VF ,Virtual FIQ" "0,1" group.long c15:0x400f++0x0 line.long 0x00 "CBAR,Configuration Base Address Register" hexmask.long 0x00 0.--31. 1. " CBA ,Configuration Base Address" tree.end width 0x08 tree "Memory Management Unit" group.long c15:0x1++0x0 line.long 0x0 "SCTLR,Control Register" bitfld.long 0x0 30. " TE ,Thumb exception enable" "ARM,Thumb" bitfld.long 0x0 29. " AFE ,Access Flag Enable" "Disabled,Enabled" bitfld.long 0x0 28. " TRE ,TEX remap enable" "Disabled,Enabled" textline " " bitfld.long 0x0 27. " NMFI ,DNonmaskable Fast Interrupt enable" "Disabled,Enabled" bitfld.long 0x0 25. " EE ,Exception endianess" "Little,Big" bitfld.long 0x0 14. " RR ,Replacement strategy for caches, BTAC, and micro TLBs" "Random,Round robin" textline " " bitfld.long 0x0 13. " V ,Base Location of Exception Registers" "0x00000000,0xFFFF0000" bitfld.long 0x0 12. " I ,Instruction Cache Enable" "Disabled,Enabled" bitfld.long 0x0 11. " Z ,Branch Prediction Enable" "Disabled,Enabled" textline " " bitfld.long 0x0 10. " SW ,SWP/SWPB Enable" "Disabled,Enabled" bitfld.long 0x0 2. " C ,Enable unified cache or data cache" "Disabled,Enabled" bitfld.long 0x0 1. " A ,Strict Alignment" "Disabled,Enabled" textline " " bitfld.long 0x0 0. " M ,MMU or Protection Unit" "Disabled,Enabled" textline " " group.long c15:0x0002++0x00 line.long 0x00 "TTBR0,Translation Table Base Register 0" hexmask.long 0x00 14.--31. 0x4000 " TTB0 ,Translation Table Base Address" bitfld.long 0x00 6. 0. " IRGN[1:0] ,Indicates inner cacheability" "Noncacheable,Back/allocated,Through,Back/not allocated" textline " " bitfld.long 0x00 3.--4. " RGN ,Outer Cacheable Attributes for Page Table Walking" "Noncacheable,Back/allocated,Through,Back/not allocated" bitfld.long 0x00 1. " S ,Page Table Walk to Shared Memory" "Nonshared,Shared" group.long c15:0x0102++0x00 line.long 0x00 "TTBR1,Translation Table Base Register 1" hexmask.long 0x00 14.--31. 0x4000 " TTB1 ,Translation Table Base Address" bitfld.long 0x00 6. 0. " IRGN[1:0] ,Indicates inner cacheability" "Noncacheable,Back/allocated,Through,Back/not allocated" textline " " bitfld.long 0x00 3.--4. " RGN ,Outer Cacheable Attributes for Page Table Walking" "Noncacheable,Back/allocated,Through,Back/not allocated" bitfld.long 0x00 1. " S ,Page Table Walk to Shared Memory" "Nonshared,Shared" group.long c15:0x0202++0x00 line.long 0x00 "TTBCR,Translation Table Base Control Register" bitfld.long 0x00 5. " PD1 ,Page Table Walk on a TLB Miss When Using Translation Table Base Register 1" "Enable,Disable" bitfld.long 0x00 4. " PD0 ,Page Table Walk on a TLB Miss When Using Translation Table Base Register 0" "Enable,Disable" bitfld.long 0x0 0.--2. " N ,Translation Table Base Register 0 page table boundary size" "Off,0x80000000,0x40000000,0x20000000,0x10000000,0x08000000,0x04000000,0x02000000" textline " " group.long c15:0x3--0x3 line.long 0x0 "DACR,Domain Access Control Register" bitfld.long 0x0 30.--31. " D15 ,Domain Access 15" "Denied,Client,Reserved,Manager" bitfld.long 0x0 28.--29. " D14 ,Domain Access 14" "Denied,Client,Reserved,Manager" bitfld.long 0x0 26.--27. " D13 ,Domain Access 13" "Denied,Client,Reserved,Manager" bitfld.long 0x0 24.--25. " D12 ,Domain Access 12" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 22.--23. " D11 ,Domain Access 11" "Denied,Client,Reserved,Manager" bitfld.long 0x0 20.--21. " D10 ,Domain Access 10" "Denied,Client,Reserved,Manager" bitfld.long 0x0 18.--19. " D9 ,Domain Access 9" "Denied,Client,Reserved,Manager" bitfld.long 0x0 16.--17. " D8 ,Domain Access 8" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 14.--15. " D7 ,Domain Access 7" "Denied,Client,Reserved,Manager" bitfld.long 0x0 12.--13. " D6 ,Domain Access 6" "Denied,Client,Reserved,Manager" bitfld.long 0x0 10.--11. " D5 ,Domain Access 5" "Denied,Client,Reserved,Manager" bitfld.long 0x0 8.--9. " D4 ,Domain Access 4" "Denied,Client,Reserved,Manager" textline " " bitfld.long 0x0 6.--7. " D3 ,Domain Access 3" "Denied,Client,Reserved,Manager" bitfld.long 0x0 4.--5. " D2 ,Domain Access 2" "Denied,Client,Reserved,Manager" bitfld.long 0x0 2.--3. " D1 ,Domain Access 1" "Denied,Client,Reserved,Manager" bitfld.long 0x0 0.--1. " D0 ,Domain Access 0" "Denied,Client,Reserved,Manager" textline " " group.long c15:0x0005++0x00 line.long 0x00 "DFSR,Data Fault Status Register" bitfld.long 0x00 12. " EXT ,External Abort Qualifier" "DECERR,SLVERR" bitfld.long 0x00 11. " RW ,Access Caused an Abort Type" "Read,Write" textline " " bitfld.long 0x00 4.--7. " DOMAIN ,Domain Accessed When a Data Fault Occurs" "D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15" bitfld.long 0x00 0.--3. 10. " STATUS ,Generated Exception Type" "Reserved,Alignment,Debug,Access/section,Instruction,Translation/section,Access/page,Translation/page,Nontranslation/synchronous external,Domain/section,Reserved,Domain/page,L1/external,Permission/section,L2/external,Permission/page,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous external,?..." group.long c15:0x0006++0x00 line.long 0x00 "DFAR,Data Fault Address Register" hexmask.long 0x00 0.--31. 1. " DFA ,Data Fault Address" group.long c15:0x0105++0x00 line.long 0x00 "IFSR,Instruction Fault Status Register" bitfld.long 0x00 12. " SD ,External Abort Qualifier" "DECERR,SLVERR" bitfld.long 0x00 0.--3. 10. " STATUS ,Generated Exception Type" "Reserved,Alignment,Debug,Access/section,Instruction,Translation/section,Access/page,Translation/page,Nontranslation/synchronous external,Domain/section,Reserved,Domain/page,L1/external,Permission/section,L2/external,Permission/page,Reserved,Reserved,Reserved,Reserved,Reserved,Reserved,Asynchronous external,?..." group.long c15:0x0206++0x00 line.long 0x00 "IFAR,Instruction Fault Address Register" hexmask.long 0x00 0.--31. 1. " IFA ,Instruction Fault Address" group.long c15:0x0015++0x00 line.long 0x00 "DAFSR,Data Auxiliary Fault Status Register" hexmask.long 0x00 0.--31. 1. " DAFS ,Data Auxiliary Fault Status" group.long c15:0x0115++0x00 line.long 0x00 "IAFSR,Instruction Auxiliary Fault Status Register" hexmask.long 0x00 0.--31. 1. " IAFS ,Instruction Auxiliary Fault Status" textline " " group.long c15:0x0047++0x00 line.long 0x00 "PAR,PA Register" hexmask.long 0x00 12.--31. 0x1000 " PA ,Physical Adress" bitfld.long 0x00 9. " NS ,Non-secure" "Not secured,Secured" textline " " bitfld.long 0x00 7. " SH ,Shareable attribute" "Non-shareable,Shareable" bitfld.long 0x00 4.--6. " Inner ,Signals region inner attributes" "Noncacheable,Strongly-ordered,Reserved,Device,Reserved,Write-back allocate,Write-through,Write-back" textline " " bitfld.long 0x00 2.--3. " Outer ,Signals region outer attributes for normal memory type" "Noncacheable,Write-back allocate,Write-through,Write-back" bitfld.long 0x00 1. " SS ,Supersection Enable bit" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " F ,Translation Successful" "Successful,No successful" textline " " group.long c15:0x002A++0x0 line.long 0x00 "PRRR,Primary Region Remap Register" bitfld.long 0x00 19. " NS1 ,Shareable Attribute Remap when S=1 for Normal Regions" "Remapped,Not remapped" bitfld.long 0x00 18. " NS0 ,Shareable Attribute Remap when S=0 for Normal Regions" "Not remapped,Remapped" textline " " bitfld.long 0x00 17. " DS1 ,Shareable Attribute Remap when S=1 for Device regions" "Remapped,Not remapped" bitfld.long 0x00 16. " DS0 ,Shareable Attribute Remap when S=0 for Device regions" "Not remapped,Remapped" textline " " bitfld.long 0x00 14.--15. " TR7 ,{TEX[0] C B} = b111 Remap" "Strongly ordered,Device,Normal,UNP" bitfld.long 0x00 12.--13. " TR6 ,{TEX[0] C B} = b110 Remap" "Strongly ordered,Device,Normal,UNP" textline " " bitfld.long 0x00 10.--11. " TR5 ,{TEX[0] C B} = b101 Remap" "Strongly ordered,Device,Normal,UNP" bitfld.long 0x00 8.--9. " TR4 ,{TEX[0] C B} = b100 Remap" "Strongly ordered,Device,Normal,UNP" textline " " bitfld.long 0x00 6.--7. " TR3 ,{TEX[0] C B} = b011 Remap" "Strongly ordered,Device,Normal,UNP" bitfld.long 0x00 4.--5. " TR2 ,{TEX[0] C B} = b010 Remap" "Strongly ordered,Device,Normal,UNP" textline " " bitfld.long 0x00 2.--3. " TR1 ,{TEX[0] C B} = b001 Remap" "Strongly ordered,Device,Normal,UNP" bitfld.long 0x00 0.--1. " TR0 ,{TEX[0] C B} = b000 Remap" "Strongly ordered,Device,Normal,UNP" group.long c15:0x012A++0x0 line.long 0x00 "NMRR,Normal Memory Remap Register" bitfld.long 0x00 30.--31. " OR7 ,Outer Attribute for {TEX[0] C B} = b111 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 28.--29. " OR6 ,Outer Attribute for {TEX[0] C B} = b110 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 26.--27. " OR5 ,Outer Attribute for {TEX[0] C B} = b101 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 24.--25. " OR4 ,Outer Attribute for {TEX[0] C B} = b100 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 22.--23. " OR3 ,Outer Attribute for {TEX[0] C B} = b011 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 20.--21. " OR2 ,Outer Attribute for {TEX[0] C B} = b010 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 18.--19. " OR1 ,Outer Attribute for {TEX[0] C B} = b001 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 16.--17. " OR0 ,Outer Attribute for {TEX[0] C B} = b000 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 14.--15. " IR7 ,Inner attribute for {TEX[0] C B} = b111 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 12.--13. " IR6 ,Inner attribute for {TEX[0] C B} = b110 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 10.--11. " IR5 ,Inner attribute for {TEX[0] C B} = b101 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 8.--9. " IR4 ,Inner attribute for {TEX[0] C B} = b100 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 6.--7. " IR3 ,Inner attribute for {TEX[0] C B} = b011 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 4.--5. " IR2 ,Inner attribute for {TEX[0] C B} = b010 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " bitfld.long 0x00 2.--3. " IR1 ,Inner attribute for {TEX[0] C B} = b001 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" bitfld.long 0x00 0.--1. " IR0 ,Inner attribute for {TEX[0] C B} = b000 Remap" "Noncachable,Write-back allocate,Write-through,Write-back no allocate" textline " " group.long c15:0x500f++0x0 line.long 0x00 "TLBHR,TLB Hitmap Register" bitfld.long 0x00 3. " 16MB ,16MB supersections are present in the TLB" "no,yes" bitfld.long 0x00 2. " 1MB ,1MB sections are present in the TLB" "no,yes" bitfld.long 0x00 1. " 16kB ,16kB pages are present in the TLB" "no,yes" bitfld.long 0x00 0. " 4kB ,4kB pages are present in the TLB" "no,yes" textline " " group.long c15:0x10d++0x0 line.long 0x0 "CONTEXT,Context ID Register" hexmask.long.tbyte 0x0 8.--31. 1. " PROCID ,Process ID" hexmask.long.byte 0x0 0.--7. 1. " ASID ,Application Space ID" group.long c15:0x020d++0x00 line.long 0x00 "URWTPID,User Read/Write Thread and Process ID Register" hexmask.long 0x00 0.--31. 1. " URWTPID ,User Read/Write Thread and Process ID" group.long c15:0x030d++0x00 line.long 0x00 "UROTPID,User Read-Only Thread and Process ID Register" hexmask.long 0x00 0.--31. 1. " UROTPID ,User Read-Only Thread and Process ID" group.long c15:0x040d++0x00 line.long 0x00 "POTPID,Privileged Only Thread and Process ID Register" hexmask.long 0x00 0.--31. 1. " POTPID ,Privileged Only Thread and Process ID" tree.end width 0x8 tree "Cache Control and Configuration" rgroup.long c15:0x1100++0x0 line.long 0x0 "CLIDR,Cache Level ID Register" bitfld.long 0x00 27.--29. " LOU ,Level of Unification" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,Level 8" bitfld.long 0x00 24.--26. " LOC ,Level of Coherency" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,Level 8" textline " " bitfld.long 0x00 21.--23. " CTYPE8 ,Cache type for levels 8" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." bitfld.long 0x00 18.--20. " CTYPE7 ,Cache type for levels 7" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." textline " " bitfld.long 0x00 15.--17. " CTYPE6 ,Cache type for levels 6" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." bitfld.long 0x00 12.--14. " CTYPE5 ,Cache type for levels 5" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." textline " " bitfld.long 0x00 9.--11. " CTYPE4 ,Cache type for levels 4" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." bitfld.long 0x00 6.--8. " CTYPE3 ,Cache type for levels 3" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." textline " " bitfld.long 0x00 3.--5. " CTYPE2 ,Cache type for levels 2" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." bitfld.long 0x00 0.--2. " CTYPE1 ,Cache type for levels 1" "No cache,I-cache,D-cache,Separate I/D,Unified,?..." rgroup.long c15:0x1700++0x0 line.long 0x0 "AIDR,Auxiliary ID Register" hexmask.long 0x00 0.--31. 1. " AID ,Auxiliary ID" rgroup.long c15:0x1000++0x0 line.long 0x0 "CCSIDR,Current Cache Size ID Register" bitfld.long 0x00 31. " WT ,Write-Through" "Not Supported,Supported" bitfld.long 0x00 30. " WB ,Write-Back" "Not Supported,Supported" textline " " bitfld.long 0x00 29. " RA ,Read-Allocate" "Not Supported,Supported" bitfld.long 0x00 28. " WA ,Write-Allocate" "Not Supported,Supported" textline " " hexmask.long.word 0x00 13.--27. 1. " SETS ,Number of Sets" hexmask.long.word 0x00 3.--12. 1. " ASSOC ,Associativity" textline " " bitfld.long 0x00 0.--2. " LSIZE ,Line Size" "4 words,8 words,16 words,32 words,64 words,128 words,256 words,512 words" group.long c15:0x2000++0x0 line.long 0x0 "CSSELR,Cache Size Selection Register" bitfld.long 0x00 1.--3. " LEVEL ,Level" "Level 1,Level 2,Level 3,Level 4,Level 5,Level 6,Level 7,Level 8" bitfld.long 0x00 0. " IND ,Instruction/Not Data" "Data,Instruction" tree.end width 0x8 tree "L2 Preload Engine" rgroup c15:0x000b++0x00 line.long 0x00 "PLEIDR,PLE Identification Register 0" bitfld.long 0x00 0. " CH0P ,Channel 0 Present" "Not present,Present" rgroup c15:0x020b++0x00 line.long 0x00 "PLESR,PLE Status Register" bitfld.long 0x00 0. " CH0R ,Channel 0 Run" "Not running,Running" rgroup c15:0x040b++0x00 line.long 0x00 "PLEFSR,PLE FIFO Status Register" group c15:0x001b++0x00 line.long 0x00 "PLEUAR,PLE User Accessibility Register" bitfld.long 0x00 0. " U0 ,User Mode Process Access Registers for Channel 0 Permission" "Not permitted,Permitted" group c15:0x011b++0x00 line.long 0x00 "PLEPCR,PLE Parameters Control Register" tree.end width 12. tree "System Performance Monitor" group.long c15:0xC9++0x0 line.long 0x0 "PMCR,Performance Monitor Control Register" hexmask.long.byte 0x00 24.--31. 1. " IMP ,Implementer code" hexmask.long.byte 0x00 16.--23. 1. " IDCODE ,Identification code" bitfld.long 0x00 11.--15. " N ,Number of counters implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " DP ,Disable CCNT when prohibited" "Enabled,Disabled" textline " " bitfld.long 0x00 4. " X ,Export Enabled" "Disabled,Enabled" bitfld.long 0x00 3. " D ,Clock Divider" "Every cycle,64th cycle" bitfld.long 0x00 2. " C ,Clock Counter Reset" "No action,Reset" bitfld.long 0x00 1. " P ,Performance Counter Reset" "No action,Reset" textline " " bitfld.long 0x00 0. " E ,Counters Enable" "Disabled,Enabled" group.long c15:0x1C9++0x0 line.long 0x0 "PMCNTENSET,Count Enable Set Register" bitfld.long 0x00 31. " C ,CCNT Enabled" "Disabled,Enabled" bitfld.long 0x00 5. " P5 ,PMN5 Enabled" "Disabled,Enabled" bitfld.long 0x00 4. " P4 ,PMN5 Enabled" "Disabled,Enabled" bitfld.long 0x00 3. " P3 ,PMN3 Enabled" "Disabled,Enabled" textline " " bitfld.long 0x00 2. " P2 ,PMN2 Enabled" "Disabled,Enabled" bitfld.long 0x00 1. " P1 ,PMN1 Enabled" "Disabled,Enabled" bitfld.long 0x00 0. " P0 ,PMN0 Enabled" "Disabled,Enabled" group.long c15:0x2C9++0x0 line.long 0x0 "PMCNTENCLR,Count Enable Clear Register" bitfld.long 0x00 31. " C ,CCNT Enabled" "Disabled,Enabled" bitfld.long 0x00 5. " P5 ,PMN5 Enabled" "Disabled,Enabled" bitfld.long 0x00 4. " P4 ,PMN5 Enabled" "Disabled,Enabled" bitfld.long 0x00 3. " P3 ,PMN3 Enabled" "Disabled,Enabled" textline " " bitfld.long 0x00 2. " P2 ,PMN2 Enabled" "Disabled,Enabled" bitfld.long 0x00 1. " P1 ,PMN1 Enabled" "Disabled,Enabled" bitfld.long 0x00 0. " P0 ,PMN0 Enabled" "Disabled,Enabled" group.long c15:0x3C9++0x0 line.long 0x0 "PMOVSR,Overflow Flag Status Register" eventfld.long 0x00 31. " C ,CCNT overflowed" "No overflow,Overflow" eventfld.long 0x00 5. " P5 ,PMN5 overflow" "No overflow,Overflow" eventfld.long 0x00 4. " P4 ,PMN5 overflow" "No overflow,Overflow" eventfld.long 0x00 3. " P3 ,PMN3 overflow" "No overflow,Overflow" textline " " eventfld.long 0x00 2. " P2 ,PMN2 overflow" "No overflow,Overflow" eventfld.long 0x00 1. " P1 ,PMN1 overflow" "No overflow,Overflow" eventfld.long 0x00 0. " P0 ,PMN0 overflow" "No overflow,Overflow" wgroup.long c15:0x4C9++0x0 line.long 0x0 "PMSWINC,Software Increment Register" eventfld.long 0x00 5. " P5 ,Increment PMN2" "No action,Increment" eventfld.long 0x00 4. " P4 ,Increment PMN1" "No action,Increment" eventfld.long 0x00 3. " P3 ,Increment PMN3" "No action,Increment" eventfld.long 0x00 2. " P2 ,Increment PMN2" "No action,Increment" textline " " eventfld.long 0x00 1. " P1 ,Increment PMN1" "No action,Increment" eventfld.long 0x00 0. " P0 ,Increment PMN0" "No action,Increment" group.long c15:0x5C9++0x0 line.long 0x0 "PMSELR,Performance Counter Selection Register" bitfld.long 0x00 0.--5. " SEL ,Selection value" "CNT0,CNT1,CNT2,CNT3,CNT4,CNT5,?..." group.long c15:0xD9++0x0 line.long 0x00 "PMCCNTR,Cycle Count Register" group.long c15:0x01d9++0x00 line.long 0x00 "PMXEVTYPER,Event Selection Register" hexmask.long.byte 0x00 0.--7. 1. " SEL ,Event Selection" group.long c15:0x02d9++0x00 line.long 0x00 "PMCNT,Performance Monitor Count Register" group.long c15:0xE9++0x0 line.long 0x0 "PMUSERENR,User Enable Register" bitfld.long 0x00 0. " EN ,User Mode Enable" "Disabled,Enabled" group.long c15:0x1E9++0x0 line.long 0x0 "PMINTENSET,Interrupt Enable Set Register" bitfld.long 0x00 31. " C ,CCNT Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 5. " P5 ,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 4. " P4 ,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 3. " P3 ,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" textline " " bitfld.long 0x00 2. " P2 ,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 1. " P1 ,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" bitfld.long 0x00 0. " P0 ,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" group.long c15:0x2E9++0x0 line.long 0x0 "PMINTENCLR,Interrupt Enable Clear Register" eventfld.long 0x00 31. " C ,CCNT Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 5. " P5 ,PMCNT5 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 4. " P4 ,PMCNT4 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 3. " P3 ,PMCNT3 Overflow Interrupt Enable" "Disabled,Enabled" textline " " eventfld.long 0x00 2. " P2 ,PMCNT2 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 1. " P1 ,PMCNT1 Overflow Interrupt Enable" "Disabled,Enabled" eventfld.long 0x00 0. " P0 ,PMCNT0 Overflow Interrupt Enable" "Disabled,Enabled" tree.end width 0xb tree "Debug" width 10. tree "Debug Registers" rgroup c14:0x000--0x000 line.long 0x0 "DBGDIDR,Debug ID Register" bitfld.long 0x0 28.--31. " WRP ,Number of Watchpoint Register Pairs" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x0 24.--27. " BRP ,Number of Breakpoint Register Pairs" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" bitfld.long 0x0 20.--23. " Context ,Number of BRPs with Context ID Comparison Capability" "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16" textline " " bitfld.long 0x0 16.--19. " Version ,Debug Architecture Version" "Reserved,ARMv6,ARMv6.1,ARMv7,?..." textline " " bitfld.long 0x0 13. " PCSAMPLE ,PC Sample register implemented" "Not implemented,Implemented" bitfld.long 0x0 12. " Security ,Security Extensions implemented" "Not implemented,Implemented" textline " " bitfld.long 0x0 4.--7. " Variant ,Implementation-defined Variant Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x0 0.--3. " Revision ,Implementation-defined Revision Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " group c14:0x22--0x22 line.long 0x0 "DBGDSCR,Debug Status and Control Register" bitfld.long 0x0 30. " DTRRXfull ,The DTRRX Full Flag" "Empty,Full" bitfld.long 0x0 29. " DTRTXfull ,The DTRTX Full Flag" "Empty,Full" textline " " bitfld.long 0x00 27. " DTRRXfull_l ,The DTRRX Full Flag 1" "Empty,Full" bitfld.long 0x00 26. " DTRTXfull_l ,The DTRTX Full Flag 1" "Empty,Full" textline " " bitfld.long 0x0 25. " SPA ,Sticky Pipeline Advance" "No effect,Instruction retired" bitfld.long 0x0 24. " IC ,Instruction Complete" "Executing,Not executing" textline " " bitfld.long 0x0 20.--21. " DTR ,DTR Access Mode" "Non-blocking,Stall,Fast,?..." bitfld.long 0x0 19. " NSWS ,Imprecise Data Aborts discarded" "Not discarded,Discarded" textline " " bitfld.long 0x0 18. " NS ,Non-secure World Status" "Secured,Not secured" bitfld.long 0x0 17. " nSPNIDEN ,Secure Non-invasive Debug Disabled" "Enabled,Disabled" textline " " bitfld.long 0x0 16. " nSPIDEN ,Secure Invasive Debug Disabled" "Enabled,Disabled" bitfld.long 0x0 15. " MONITOR ,Monitor Debug-mode enable" "Disabled,Enabled" textline " " bitfld.long 0x0 14. " HDEn ,Halting Debug-mode enable" "Disabled,Enabled" bitfld.long 0x0 13. " EXECUTE ,Execute instruction enable" "Disabled,Enabled" textline " " bitfld.long 0x0 12. " COMMS ,User mode access to Comms Channel disable" "Enabled,Disabled" bitfld.long 0x0 11. " IntDis ,Disable Interrupts" "Enabled,Disabled" textline " " bitfld.long 0x0 10. " DbgAck ,Force Debug Acknowledge" "Not forced,Forced" bitfld.long 0x0 8. " uExt ,Sticky Undefined Exception" "No exception,Exception" textline " " bitfld.long 0x0 7. " IABORT ,Sticky Imprecise Abort" "Not aborted,Aborted" bitfld.long 0x0 6. " PABORT ,Sticky Precise Abort" "Not aborted,Aborted" textline " " bitfld.long 0x0 2.--5. " MOE ,Method of Debug Entry" "Debug Entry,Breakpoint,Imprecise Watchpoint,BKPT instruction,External debug,Vector catch,Reserved,Reserved,OS Unlock,?..." bitfld.long 0x0 1. " RESTARTED ,Core Restarted" "Debug not exited,Debug exited" textline " " bitfld.long 0x0 0. " HALTED ,Core Halted" "Normal state,Debug state" textline " " if (((per.long(c14:0x00))&0x01000)==0x00000) group c14:0x007--0x007 line.long 0x0 "DBGVCR,Vector Catch Register" bitfld.long 0x0 7. " FIQ ,Vector Catch Enable FIQ" "Disabled,Enabled" bitfld.long 0x0 6. " IRQ ,Vector Catch Enable IRQ" "Disabled,Enabled" textline " " bitfld.long 0x0 4. " DABORT ,Vector Catch Enable Data Abort" "Disabled,Enabled" bitfld.long 0x0 3. " PABORT ,Vector Catch Enable Prefetch Abort" "Disabled,Enabled" textline " " bitfld.long 0x0 2. " SWI ,Vector Catch Enable SWI" "Disabled,Enabled" bitfld.long 0x0 1. " UNDEF ,Vector Catch Enable Undefined Instruction" "Disabled,Enabled" textline " " bitfld.long 0x0 0. " RESET ,Vector Catch Enable Reset" "Disabled,Enabled" else group c14:0x007--0x007 line.long 0x0 "DBGVCR,Vector Catch Register" bitfld.long 0x0 31. " FIQN ,Vector Catch Enable FIQ (Non-secure)" "Disabled,Enabled" bitfld.long 0x0 30. " IRQN ,Vector Catch Enable IRQ (Non-secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 28. " DABORTN ,Vector Catch Enable Data Abort (Non-secure)" "Disabled,Enabled" bitfld.long 0x0 27. " PABORTN ,Vector Catch Enable Prefetch abort (Non-secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 26. " SWIN ,Vector Catch Enable SWI (Non-secure)" "Disabled,Enabled" bitfld.long 0x0 25. " UNDEFS ,Vector Catch Enable Undefined (Non-secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 15. " FIQS ,Vector Catch Enable FIQ (Secure)" "Disabled,Enabled" bitfld.long 0x0 14. " IRQS ,Vector Catch Enable IRQ (Secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 12. " DABORTS ,Vector Catch Enable Data Abort (Secure)" "Disabled,Enabled" bitfld.long 0x00 11. " PABORTS ,Vector Catch Enable Prefetch abort (Secure)" "Disabled,Enabled" textline " " bitfld.long 0x0 10. " SMI ,Vector Catch Enable SMI (Secure)" "Disabled,Enabled" bitfld.long 0x0 7. " FIQ ,Vector Catch Enable FIQ" "Disabled,Enabled" textline " " bitfld.long 0x0 6. " IRQ ,Vector Catch Enable IRQ" "Disabled,Enabled" bitfld.long 0x0 4. " DABORT0 ,Vector Catch Enable Data Abort" "Disabled,Enabled" textline " " bitfld.long 0x0 3. " PABORT ,Vector Catch Enable Prefetch Abort" "Disabled,Enabled" bitfld.long 0x0 2. " SWI ,Vector Catch Enable SWI" "Disabled,Enabled" textline " " bitfld.long 0x0 1. " UNDEF ,Vector Catch Enable Undefined Instruction" "Disabled,Enabled" bitfld.long 0x0 0. " RESET ,Vector Catch Enable Reset" "Disabled,Enabled" endif hgroup c14:0x020--0x020 hide.long 0x0 "DBGDTRRX,Debug Receive Register (External View)" in group c14:0x023--0x023 line.long 0x0 "DBGDTRTX,Debug Transmit Register (External View)" group c14:0x09++0x00 line.long 0x00 "DBGECR,Event Catch Register" bitfld.long 0x00 0. " OSUC ,OS Unlock Catch" "Disabled,Enabled" group c14:0x0a++0x00 line.long 0x00 "DBGDSCCR,Debug State Cache Control Register" bitfld.long 0x00 2. " NWT ,Not Write-Through" "Forced,Normal" bitfld.long 0x00 0. " DUCL ,Data and Unified Cache Linefill" "Disabled,Normal" wgroup c14:0x21++0x00 line.long 0x00 "DBGITR,Instruction Transfer Register" rgroup c14:0x21++0x00 line.long 0x00 "DBGPCSR,Program Counter Sampling Register" hexmask.long 0x00 2.--31. 1. " PCSV ,Program Counter sample value" bitfld.long 0x00 0.--1. " MPCSV ,Meaning of PC sample value" "ARM,Thumb,Jazelle,Thumb" wgroup c14:0x24++0x00 line.long 0x00 "DBGDRCR,Debug Run Control Register" bitfld.long 0x00 3. " CSPA ,Clear Sticky Pipeline Advance" "Not cleared,Cleared" bitfld.long 0x00 2. " CSE ,Clear Sticky Exceptions" "Not cleared,Cleared" textline " " bitfld.long 0x00 1. " RR ,Restart Request" "Not requested,Requested" bitfld.long 0x00 0. " HR ,Halt Request" "Not requested,Requested" rgroup c14:0x28++0x00 line.long 0x00 "DBGPCSR,Program Counter Sampling Register" hexmask.long 0x00 2.--31. 1. " PCSV ,Program Counter sample value" bitfld.long 0x00 0.--1. " MPCSV ,Meaning of PC sample value" "ARM,Thumb,Jazelle,Thumb" rgroup c14:0x29++0x00 line.long 0x00 "DBGCIDSR,Context ID Sampling Register" wgroup c14:0xc0++0x00 line.long 0x00 "DBGOSLAR,Operating System Lock Access Register" rgroup c14:0xc1++0x00 line.long 0x00 "DBGOSLSR,Operating System Lock Status Register" bitfld.long 0x00 2. " 32_BA ,32-Bit Access" "Not required,Required" bitfld.long 0x00 1. " LB ,Locked Bit" "Not locked,Locked" bitfld.long 0x00 0. " LIB ,Lock Implemented Bit" "Not implemented,Implemented" group c14:0xc2++0x00 line.long 0x00 "DBGOSSRR,Operating System Save and Restore Register" hexmask.long 0x00 0.--31. 1. " OSSR ,OS Save and Restore" group c14:0xc4++0x00 line.long 0x00 "DBGPRCR,Device Power-Down and Reset Control Register" bitfld.long 0x00 2. " HNDLR ,Hold non-debug logic reset" "Not held,Held" bitfld.long 0x00 0. " DBGNOPWRDWN ,DBGNOPWRDWN output signal" "Low,High" group c14:0xc5++0x00 line.long 0x00 "DBGPRSR,Device Power-Down and Reset Status Register" bitfld.long 0x00 3. " SR ,Sticky Reset Status" "Not reset,Reset" bitfld.long 0x00 2. " R ,Reset Status" "No reset,Reset" textline " " bitfld.long 0x00 1. " SPD ,Sticky Power-down Status" "Not reset,Reset" bitfld.long 0x00 0. " PU ,Power-up Status" "Powered down,Powered up" width 11. tree "Processor Identifier Registers" rgroup c14:0x340--0x340 line.long 0x00 "CPUID,Main ID Register" hexmask.long.byte 0x0 24.--31. 0x1 " IMPL ,Implementer code" hexmask.long.byte 0x0 20.--23. 0x1 " SPECREV ,Variant number" textline " " hexmask.long.byte 0x0 16.--19. 0x1 " ARCH ,Architecture" hexmask.long.word 0x0 4.--15. 0x1 " PARTNUM ,Part Number" textline " " hexmask.long.byte 0x0 0.--3. 0x1 " REV ,Layout Revision" rgroup c14:0x341--0x341 line.long 0x00 "CACHETYPE,Cache Type Register" bitfld.long 0x0 29.--31. " FORMAT ,Format" "Not ARMv7,Not ARMv7,Not ARMv7,Not ARMv7,ARMv7,Not ARMv7,Not ARMv7,Not ARMv7" bitfld.long 0x0 24.--27. " CWG ,Cache Writeback Granule" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x0 20.--23. " ERG ,Exclusives Reservation Granule" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " DMinLine ,Words of Smallest Line Length in L1 or L2 Data Cache Number" "Reserved,Reserved,Reserved,Reserved,16x32-bit words,?..." textline " " bitfld.long 0x00 14.--15. " L1_Ipolicy ,VIPT Instruction Cache Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " IMinLine ,Words of Smallest Line Length in L1 or L2 Instruction Cache Number" "Reserved,Reserved,Reserved,Reserved,16x32-bit words,?..." rgroup c14:0x343--0x343 line.long 0x00 "TLBTYPE,TLB Type Register" hexmask.long.byte 0x0 16.--23. 0x1 " ILsize ,Specifies the number of instruction TLB lockable entries" hexmask.long.byte 0x0 8.--15. 0x1 " DLsize ,Specifies the number of unified or data TLB lockable entries" textline " " bitfld.long 0x0 1. " TLB_size ,TLB Size" "64,128" bitfld.long 0x0 0. " U ,Unified or separate instruction TLBs" "Unified,Separate" rgroup c14:0x348--0x348 line.long 0x00 "ID_PFR0,Processor Feature Register 0" bitfld.long 0x00 12.--15. " State3 ,Thumb-2 Execution Environment (Thumb-2EE) Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. " State2 ,Java Extension Interface Support" "Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " State1 ,Thumb Encoding Supported by the Processor Type" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " State0 ,ARM Instruction Set Support" "Reserved,Supported,?..." rgroup c14:0x349--0x349 line.long 0x00 "ID_PFR1,Processor Feature Register 1" bitfld.long 0x00 8.--11. " MPM ,Microcontroller Programmer's Model Support" "Not supported,?..." bitfld.long 0x00 4.--7. " SE ,Security Extensions Architecture v1 Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 0.--3. " PM ,Standard ARMv4 Programmer's Model Support" "Reserved,Supported,?..." rgroup c14:0x34a--0x34a line.long 0x00 "ID_DFR0,Debug Feature Register 0" bitfld.long 0x00 20.--23. " MDM_MM ,Microcontroller Debug Model Support" "Not supported,?..." bitfld.long 0x00 16.--19. " TDM_MM ,Trace Debug Model (Memory-Mapped) Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 12.--15. " TDM_CB ,Coprocessor-Based Trace Debug Model Support" "Not supported,?..." bitfld.long 0x00 8.--11. " CDM_MM ,Memory-Mapped Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " SDM_CB ,Secure Debug Model (Coprocessor) Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " CDM_CB ,Coprocessor Debug Model Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." rgroup c14:0x34b--0x34b line.long 0x00 "ID_AFR0,Auxiliary Feature Register 0" hexmask.long 0x00 0.--31. 1. " AF ,Auxiliary Feature" rgroup c14:0x34c--0x34c line.long 0x00 "ID_MMFR0,Processor Feature Register 0" bitfld.long 0x00 24.--27. " FCSE ,Fast Context Switch Memory Mappings Support" "Not supported,?..." bitfld.long 0x00 20.--23. " ACR ,Auxiliary Control Register Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 16.--19. " TCM ,TCM and Associated DMA Support" "Not supported,?..." bitfld.long 0x00 12.--15. " OSS ,Outer Shareable Support" "Not supported,?..." textline " " bitfld.long 0x00 8.--11. " CC_CPUA ,Cache Coherency Support" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. " PMSA ,Physical Memory System Architecture (PMSA) Support" "Not supported,?..." textline " " bitfld.long 0x00 0.--3. " VMSA ,Virtual Memory System Architecture (VMSA) Support" "Reserved,Reserved,Reserved,Supported,?..." rgroup c14:0x34d--0x34d line.long 0x00 "ID_MMFR1,Processor Feature Register 1" bitfld.long 0x00 28.--31. " BTB ,Branch Predictor" "Reserved,Reserved,Required,?..." bitfld.long 0x00 24.--27. " L1TCO ,Test and Clean Operations on Data Cache/Harvard/Unified Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 20.--23. " L1UCMO ,L1 Cache/All Maintenance Operations/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 16.--19. " L1HCMO ,L1 Cache/All Maintenance Operations/Harvard Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 12.--15. " L1UCLMOSW ,L1 Cache Line Maintenance Operations by Set and Way/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. " L1HCLMOSW ,L1 Cache Line Maintenance Operations by Set and Way/Harvard Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 4.--7. " L1UCLMOMVA ,L1 Cache Line Maintenance Operations by VA/Unified Architecture Support" "Not supported,?..." bitfld.long 0x00 0.--3. " L1HCLMOMVA ,L1 Cache Line Maintenance Operations by VA/Harvard Architecture" "Not supported,?..." rgroup c14:0x34e--0x34e line.long 0x00 "ID_MMFR2,Processor Feature Register 2" bitfld.long 0x00 28.--31. " HAF ,Hardware Access Flag Support" "Not supported,?..." bitfld.long 0x00 24.--27. " WFI ,Wait for Interrupt Stalling Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 20.--23. " MBF ,Memory Barrier Operations Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 16.--19. " UTLBMO ,TLB Maintenance Operations/Unified Architecture Support" "Reserved,Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 12.--15. " HTLBMO ,TLB Maintenance Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 8.--11. " HL1CMRO ,Cache Maintenance Range Operations/Harvard Architecture Support" "Not supported,?..." textline " " bitfld.long 0x00 4.--7. " HL1BPCRO ,Background Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." bitfld.long 0x00 0.--3. " HL1FPCRO ,Foreground Prefetch Cache Range Operations/Harvard Architecture Support" "Not supported,?..." rgroup c14:0x34f--0x34f line.long 0x00 "ID_MMFR3,Processor Feature Register 3" bitfld.long 0x00 28.--31. " SS ,Supersection support" "Supported,?..." bitfld.long 0x00 20.--23. " CW ,Coherent walk" "Supported,?..." textline " " bitfld.long 0x00 12.--15. " MB ,Invalidate broadcast Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. " BPM ,Invalidate Branch predictor Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " HCMOSW ,Invalidate Cache by Set and Way/Clean by Set and Way/Invalidate and Clean by Set and Way Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. " HCMOMVA ,Invalidate Cache MVA Support" "Reserved,Supported,?..." rgroup c14:0x350--0x350 line.long 0x00 "ID_ISAR0,ISA Feature Register 0" bitfld.long 0x00 24.--27. " DIVI ,Divide Instructions Support" "Not supported,?..." bitfld.long 0x00 20.--23. " DEBI ,Debug Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 16.--19. " CI ,Coprocessor Instructions Support" "Not supported,?..." bitfld.long 0x00 12.--15. " CBI ,Combined Compare and Branch Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 8.--11. " BI ,Bitfield Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 4.--7. " BCI ,Bit Counting Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 0.--3. " SI ,Swap Instructions Support" "Reserved,Supported,?..." rgroup c14:0x351--0x351 line.long 0x00 "ID_ISAR1,ISA Feature Register 1" bitfld.long 0x00 28.--31. " JI ,Jazelle Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 24.--27. " INTI ,Interwork Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 20.--23. " IMMI ,Immediate Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 16.--19. " ITEI ,If Then Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 12.--15. " EXTI ,Extend Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. " E2I ,Exception 2 Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " E1I ,Exception 1 Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 0.--3. " ENDI ,Endian Instructions Support" "Reserved,Supported,?..." rgroup c14:0x352--0x352 line.long 0x00 "ID_ISAR2,ISA Feature Register 2" bitfld.long 0x00 28.--31. " RI ,Reversal Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 24.--27. " PSRI ,PSR Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 20.--23. " UMI ,Advanced Unsigned Multiply Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 16.--19. " SMI ,Advanced Signed Multiply Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." textline " " bitfld.long 0x00 12.--15. " MI ,Multiply Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. " II ,Multi-Access Interruptible Instructions Support" "Not supported,?..." textline " " bitfld.long 0x00 4.--7. " MHI ,Memory Hint Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " LSI ,Load and Store Instructions Support" "Reserved,Supported,?..." rgroup c14:0x353--0x353 line.long 0x00 "ID_ISAR3,ISA Feature Register 3" bitfld.long 0x00 28.--31. " T2E ,Thumb-2 Extensions Support" "Reserved,Supported,?..." bitfld.long 0x00 24.--27. " NOPI ,True NOP Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 20.--23. " TCI ,Thumb Copy Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 16.--19. " TBI ,Table Branch Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 12.--15. " SPI ,Synchronization Primitive Instructions Support" "Reserved,Reserved,Supported,?..." bitfld.long 0x00 8.--11. " SVCI ,SVC Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " SIMDI ,Single Instruction Multiple Data (SIMD) Instructions Support" "Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " SI ,Saturate Instructions Support" "Reserved,Supported,?..." rgroup c14:0x354--0x354 line.long 0x00 "ID_ISAR4,ISA Feature Register 4" bitfld.long 0x00 28.--31. " SWP_frac ,SWAP_frac" "Supported,?..." bitfld.long 0x00 24.--27. " PSR_M_I ,PSR_M Instructions Support" "Not supported,?..." textline " " bitfld.long 0x00 20.--23. " SPRI ,Synchronization Primitive instructions" "Not supported,?..." bitfld.long 0x00 16.--19. " BI ,Barrier Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 12.--15. " SMCI ,SMC Instructions Support" "Reserved,Supported,?..." bitfld.long 0x00 8.--11. " WBI ,Write-Back Instructions Support" "Reserved,Supported,?..." textline " " bitfld.long 0x00 4.--7. " WSI ,With-Shift Instructions Support" "Reserved,Reserved,Reserved,Reserved,Supported,?..." bitfld.long 0x00 0.--3. " UI ,Unprivileged Instructions Support" "Reserved,Reserved,Supported,?..." rgroup c14:0x355--0x355 line.long 0x00 "ID_ISAR5,ISA Feature Register 5 (Reserved)" tree.end width 17. tree "Coresight Management Registers" textline " " group c14:0x03bd++0x00 line.long 0x00 "DBGITCTRL_IOC,Integration Internal Output Control Register" bitfld.long 0x00 5. " I_DBGTRIGGER ,Internal DBGTRIGGER" "0,1" bitfld.long 0x00 4. " I_DBGRESTARTED ,Internal DBGRESTARTED" "0,1" textline " " bitfld.long 0x00 3. " I_nPMUIRQ ,Internal nPMUIRQ" "0,1" bitfld.long 0x00 2. " InternalCOMMTX ,Internal COMMTX" "0,1" textline " " bitfld.long 0x00 1. " I_COMMRX ,Internal COMMRX" "0,1" bitfld.long 0x00 0. " I_DBGACK ,Internal DBGACK" "0,1" group c14:0x03be++0x00 line.long 0x00 "DBGITCTRL_EOC,Integration External Output Control Register" bitfld.long 0x00 7. " nDMAEXTERRIQ ,External nDMAEXTERRIRQ" "0,1" bitfld.long 0x00 6. " nDMASIRQ ,External nDMASIRQ" "0,1" textline " " bitfld.long 0x00 5. " nDMAIRQ ,External nDMAIRQ" "0,1" bitfld.long 0x00 4. " nPMUIRQ ,External nPMUIRQ" "0,1" textline " " bitfld.long 0x00 3. " STANDBYWFI ,External STANDBYWFI" "0,1" bitfld.long 0x00 2. " COMMTX ,External COMMTX" "0,1" textline " " bitfld.long 0x00 1. " COMMRX ,External COMMRX" "0,1" bitfld.long 0x00 0. " DBGACK ,External DBGACK" "0,1" rgroup c14:0x03bf++0x00 line.long 0x00 "DBGITCTRL_IS,Integration Input Status Register" bitfld.long 0x00 11. " CTI_DBGRESTART ,CTI Debug Restart" "0,1" bitfld.long 0x00 10. " CTI_EDBGRQ ,CTI Debug Request" "0,1" textline " " bitfld.long 0x00 9. " CTI_PMUEXTIN[1] ,CTI PMUEXTIN[1] Signal" "0,1" bitfld.long 0x00 8. " CTI_PMUEXTIN[0] ,CTI PMUEXTIN[0] Signal" "0,1" textline " " bitfld.long 0x00 2. " nFIQ ,nFIQ Input" "0,1" bitfld.long 0x00 1. " nIRQ ,nIRQ Input" "0,1" textline " " bitfld.long 0x00 0. " EDBGRQ ,EDBGRQ Input" "0,1" group c14:0x3c0--0x3c0 line.long 0x0 "DBGITCTRL,Integration Mode Control Register" bitfld.long 0x0 0. " IME ,Integration Mode Enable" "Disabled,Enabled" group c14:0x3e8--0x3e8 line.long 0x0 "DBGCLAIMSET,Claim Tag Set Register" bitfld.long 0x0 7. " CT7 ,Claim Tag 7" "No Effect,Set" bitfld.long 0x0 6. " CT6 ,Claim Tag 6" "No Effect,Set" textline " " bitfld.long 0x0 5. " CT5 ,Claim Tag 5" "No Effect,Set" bitfld.long 0x0 4. " CT4 ,Claim Tag 4" "No Effect,Set" textline " " bitfld.long 0x0 3. " CT3 ,Claim Tag 3" "No Effect,Set" bitfld.long 0x0 2. " CT2 ,Claim Tag 2" "No Effect,Set" textline " " bitfld.long 0x0 1. " CT1 ,Claim Tag 1" "No Effect,Set" bitfld.long 0x0 0. " CT0 ,Claim Tag 0" "No Effect,Set" group c14:0x3e9--0x3e9 line.long 0x0 "DBGCLAIMCLR,Claim Tag Clear Register" bitfld.long 0x0 7. " CT7 ,Claim Tag 7" "No Effect,Cleared" bitfld.long 0x0 6. " CT6 ,Claim Tag 6" "No Effect,Cleared" textline " " bitfld.long 0x0 5. " CT5 ,Claim Tag 5" "No Effect,Cleared" bitfld.long 0x0 4. " CT4 ,Claim Tag 4" "No Effect,Cleared" textline " " bitfld.long 0x0 3. " CT3 ,Claim Tag 3" "No Effect,Cleared" bitfld.long 0x0 2. " CT2 ,Claim Tag 2" "No Effect,Cleared" textline " " bitfld.long 0x0 1. " CT1 ,Claim Tag 1" "No Effect,Cleared" bitfld.long 0x0 0. " CT0 ,Claim Tag 0" "No Effect,Cleared" wgroup c14:0x3ec--0x3ec line.long 0x0 "DBGLAR,Lock Access Register" rgroup c14:0x3ed--0x3ed line.long 0x0 "DBGLSR,Lock Status Register" bitfld.long 0x00 2. " NTT ,Not 32-bit access" "32-bit,Not 32-bit" bitfld.long 0x00 1. " SLK ,Software Lock status" "Not locked,Locked" textline " " bitfld.long 0x00 0. " SLI ,Software Lock Implemented" "Not implemented,Implemented" rgroup c14:0x3ee--0x3ee line.long 0x0 "DBGAUTHSTATUS,Debug Authentication Status Register" bitfld.long 0x00 7. " SNI ,Secure non-invasive debug features implementation" "No effect,Implemented" bitfld.long 0x00 6. " SNE ,Secure non-invasive debug enable (DBGEN OR NIDEN) AND (SPIDEN OR SPNIDEN)" "Disabled,Enabled" textline " " bitfld.long 0x00 5. " SI ,Secure invasive debug features implementation" "No effect,Implemented" bitfld.long 0x00 4. " SE ,Secure invasive debug enable (DBGEN AND SPIDEN)" "Disabled,Enabled" textline " " bitfld.long 0x00 3. " NSNI ,Non-secure non-invasive debug features implementation" "Not implemented,Implemented" bitfld.long 0x00 2. " NSNE ,Non-secure non-invasive debug enable (DBGEN OR NIDEN)" "Disabled,Enabled" textline " " bitfld.long 0x00 1. " NSI ,Non-secure invasive debug features implementation" "Not implemented,Implemented" bitfld.long 0x00 0. " NSE ,Non-secure invasive debug enable (DBGEN)" "Disabled,Enabled" hgroup c14:0x3f2--0x3f2 hide.long 0x0 "DBGDEVID,Device Identifier (RESERVED)" rgroup c14:0x3f3--0x3f3 line.long 0x0 "DBGDEVTYPE,Device Type" bitfld.long 0x00 4.--7. " T ,Sub type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " C ,Main class" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup c14:0x3f8--0x3f8 line.long 0x00 "DBGPID0,Debug Peripheral ID 0" hexmask.long.byte 0x00 0.--7. 1. " PN[7:0] ,Part Number [7:0]" rgroup c14:0x3f9--0x3f9 line.long 0x00 "DBGPID1,Debug Peripheral ID 1" hexmask.long.byte 0x00 4.--7. 1. " JEPID[3:0] ,JEP Identity Code[3:0]" hexmask.long.byte 0x00 0.--3. 1. " PN[11:8] ,Part Number [11:8]" rgroup c14:0x3fa--0x3fa line.long 0x00 "DBGPID2,Debug Peripheral ID 2" hexmask.long.byte 0x00 4.--7. 1. " REV ,Revision" bitfld.long 0x00 3. " UJEPCODE ,Uses JEP Code" "Disabled,Enabled" hexmask.long.byte 0x00 0.--2. 1. " JEPID[6:4] ,JEP Identity Code[6:4]" rgroup c14:0x3fb--0x3fb line.long 0x00 "DBGPID3,Debug Peripheral ID 3" hexmask.long.byte 0x00 4.--7. 1. " REVAND ,Manufacturing revision" hexmask.long.byte 0x00 0.--3. 1. " CM ,Customer modified" rgroup c14:0x3f4--0x3f4 line.long 0x00 "DBGPID4,Debug Peripheral ID 4" hexmask.long.byte 0x00 4.--7. 1. " 4KB_COUNT ,4KB count" hexmask.long.byte 0x00 0.--3. 1. " JEP106_CONT_CODE ,JEP 106 Continuation code" rgroup c14:0x3fc--0x3fc line.long 0x00 "DBGCID0,Debug Component ID 0" hexmask.long.byte 0x00 0.--7. 1. " PREAMBLE ,Preamble byte 0" rgroup c14:0x3fd--0x3fd line.long 0x00 "DBGCID1,Debug Component ID 1" hexmask.long.byte 0x00 4.--7. 1. " CC ,Component class" hexmask.long.byte 0x00 0.--3. 1. " PREAMBLE ,Preamble byte 1" rgroup c14:0x3fe--0x3fe line.long 0x00 "DBGCID2,Debug Component ID 2" hexmask.long.byte 0x00 0.--7. 1. " PREAMBLE ,Preamble byte 2" rgroup c14:0x3ff--0x3ff line.long 0x00 "DBGCID3,Debug Component ID 3" hexmask.long.byte 0x00 0.--7. 1. " PREAMBLE ,Preamble byte 3" tree.end tree.end width 6. tree "Breakpoint Registers" group c14:0x40++0x00 line.long 0x00 "BVR0,Breakpoint Value Register 0" group c14:0x50++0x00 line.long 0x00 "BCR0,Breakpoint Control Register 0" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Reserved,Reserved,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SWAC ,Secure World Access Control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " S ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" group c14:0x41++0x00 line.long 0x00 "BVR1,Breakpoint Value Register 1" group c14:0x51++0x00 line.long 0x00 "BCR1,Breakpoint Control Register 1" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Reserved,Reserved,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SWAC ,Secure World Access Control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " S ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" group c14:0x42++0x00 line.long 0x00 "BVR2,Breakpoint Value Register 2" group c14:0x52++0x00 line.long 0x00 "BCR2,Breakpoint Control Register 2" bitfld.long 0x00 20.--22. " M ,BVR Meaning" "IVA match,Linked IVA match,Reserved,Reserved,IVA mismatch,Linked IVA mismatch,?..." bitfld.long 0x00 16.--19. " LBRP ,Linked BRP Number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x00 14.--15. " SWAC ,Secure World Access Control" "Both,Nonsecure,Secure,?..." textline " " bitfld.long 0x0 8. " BAS ,Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" bitfld.long 0x00 1.--2. " S ,Supervisor Access Control" "User/system/supervisor,Privileged,User,Any" bitfld.long 0x00 0. " B ,Breakpoint Enable" "Disabled,Enabled" tree.end width 6. tree "Watchpoint Control Registers" group c14:0x60++0x00 line.long 0x00 "WVR0,Watchpoint Value Register 0" hexmask.long 0x00 2.--31. 0x04 " WA0 ,Watchpoint Address 0" group c14:0x70--0x70 line.long 0x0 "WCR0,Watchpoint Control Register 0" bitfld.long 0x0 20. " EL ,Enable Linking" "Disabled,Enabled" textline " " bitfld.long 0x0 16.--19. " LBN ,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x0 14.--15. " SWAC ,Secure world access control" "Non-secure & Secure,Non-secure,Secure,?..." textline " " bitfld.long 0x0 12. " BAS ,Byte 7 address select" "0,1" bitfld.long 0x0 11. ",Byte 6 address select" "0,1" bitfld.long 0x0 10. ",Byte 5 address select" "0,1" bitfld.long 0x0 9. ",Byte 4 address select" "0,1" bitfld.long 0x0 8. ",Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" textline " " bitfld.long 0x0 3.--4. " RD/WR ,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x0 1.--2. " PAC ,Privileged access control" "Reserved,Privileged,USR,Any" textline " " bitfld.long 0x0 0. " WE ,Watchpoint enable" "Disabled,Enabled" group c14:0x61++0x00 line.long 0x00 "WVR1,Watchpoint Value Register 1" hexmask.long 0x00 2.--31. 0x04 " WA1 ,Watchpoint Address 1" group c14:0x71--0x71 line.long 0x0 "WCR1,Watchpoint Control Register 1" bitfld.long 0x0 20. " EL ,Enable Linking" "Disabled,Enabled" textline " " bitfld.long 0x0 16.--19. " LBN ,Linked BRP number" "BRP,BRP1,BRP2,BRP3,BRP4,BRP5,BRP6,BRP7,BRP8,BRP9,BRP10,BRP11,BRP12,BRP13,BRP14,BRP15" bitfld.long 0x0 14.--15. " SWAC ,Secure world access control" "Non-secure & Secure,Non-secure,Secure,?..." textline " " bitfld.long 0x0 12. " BAS ,Byte 7 address select" "0,1" bitfld.long 0x0 11. ",Byte 6 address select" "0,1" bitfld.long 0x0 10. ",Byte 5 address select" "0,1" bitfld.long 0x0 9. ",Byte 4 address select" "0,1" bitfld.long 0x0 8. ",Byte 3 address select" "0,1" bitfld.long 0x0 7. ",Byte 2 address select" "0,1" bitfld.long 0x0 6. ",Byte 1 address select" "0,1" bitfld.long 0x0 5. ",Byte 0 address select" "0,1" textline " " bitfld.long 0x0 3.--4. " RD/WR ,Load/Store access control" "Reserved,Load,Store,Any" bitfld.long 0x0 1.--2. " PAC ,Privileged access control" "Reserved,Privileged,USR,Any" textline " " bitfld.long 0x0 0. " WE ,Watchpoint enable" "Disabled,Enabled" group c14:0x006--0x006 line.long 0x0 "WFAR,Watchpoint Fault Address Register" hexmask.long.long 0x00 1.--31. 0x02 " WFAR ,Address of the watchpointed instruction" textline " " tree.end tree.end width 0x0B sif corename()=="CORTEXA5MPCORE" width 9. base ad:(d.l(c15:0x400f)) tree "Snoop Control Unit (SCU)" group.long 0x00++0x03 line.long 0x00 "SCUCR,SCU Control Register" bitfld.long 0x00 6. " ICSE ,IC standby enable" "Disabled,Enabled" bitfld.long 0x00 5. " SCUSE ,SCU standby enable" "Disabled,Enabled" bitfld.long 0x00 1. " AFE ,Address filtering enable" "Disabled,Enabled" textline " " bitfld.long 0x00 0. " SCUE ,SCU enable" "Disabled,Enabled" rgroup.long 0x04++0x03 line.long 0x00 "SCUCON,SCU Configuration Register" bitfld.long 0x00 20.--23. " RAM3 ,Cortex-A5 CPU3 Tag RAM Size" "4KB,8KB,,16KB,,,,32KB,,,,,,,,64KB" bitfld.long 0x00 16.--19. " RAM2 ,Cortex-A5 CPU2 Tag RAM Size" "4KB,8KB,,16KB,,,,32KB,,,,,,,,64KB" bitfld.long 0x00 12.--15. " RAM1 ,Cortex-A5 CPU1 Tag RAM Size" "4KB,8KB,,16KB,,,,32KB,,,,,,,,64KB" textline " " bitfld.long 0x00 8.--11. " RAM0 ,Cortex-A5 CPU0 Tag RAM Size" "4KB,8KB,,16KB,,,,32KB,,,,,,,,64KB" bitfld.long 0x00 7. " MOD3 ,CPU3 Mode" "AMP,SMP" bitfld.long 0x00 6. " MOD2 ,CPU2 Mode" "AMP,SMP" textline " " bitfld.long 0x00 5. " MOD1 ,CPU1 Mode" "AMP,SMP" bitfld.long 0x00 4. " MOD0 ,CPU0 Mode" "AMP,SMP" bitfld.long 0x00 0.--1. " NUM ,CPU Number" "CPU0,CPU0-CPU1,CPU0-CPU2,CPU0-CPU3" group.long 0x08++0x03 line.long 0x00 "SCUSTAT,SCU CPU Power Status Register" bitfld.long 0x00 24.--25. " STAT3 ,CPU3 Status" "Normal,Reserved,Dormant,Powered-off" bitfld.long 0x00 16.--17. " STAT2 ,CPU2 Status" "Normal,Reserved,Dormant,Powered-off" textline " " bitfld.long 0x00 8.--9. " STAT1 ,CPU1 Status" "Normal,Reserved,Dormant,Powered-off" bitfld.long 0x00 0.--1. " STAT0 ,CPU0 Status" "Normal,Reserved,Dormant,Powered-off" wgroup.long 0x0c++0x03 line.long 0x00 "INV,SCU Invalidate All Register" bitfld.long 0x00 12.--15. " WAY3 ,Cortex-A5 CPU3 Invalidated Ways" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " WAY2 ,Cortex-A5 CPU2 Invalidated Ways" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. " WAY1 ,Cortex-A5 CPU1 Invalidated Ways" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" textline " " bitfld.long 0x00 0.--3. " WAY0 ,Cortex-A5 CPU0 Invalidated Ways" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40++0x03 line.long 0x00 "FSAR,Filtering Start Address Register" hexmask.long.word 0x00 20.--31. 0x10 " FSA ,Filtering start address" group.long 0x44++0x03 line.long 0x00 "FEAR,Filtering End Address Register" hexmask.long.word 0x00 20.--31. 0x10 " FEA ,Filtering end address" group.long 0x50++0x03 line.long 0x00 "SAC,SCU Access Control Register" bitfld.long 0x00 3. " CPU3 ,CPU3 Access the SAC" "No access,Access" bitfld.long 0x00 2. " CPU2 ,CPU2 Access the SAC" "No access,Access" bitfld.long 0x00 1. " CPU1 ,CPU1 Access the SAC" "No access,Access" textline " " bitfld.long 0x00 0. " CPU0 ,CPU0 Access the SAC" "No access,Access" group.long 0x54++0x03 line.long 0x00 "SSAC,SCU Secure Access Control Register" bitfld.long 0x00 11. " GCPU3 ,Global timer for CPU3" "Secure only,Secure/Non-secure" bitfld.long 0x00 10. " GCPU2 ,Global timer for CPU2" "Secure only,Secure/Non-secure" bitfld.long 0x00 9. " GCPU1 ,Global timer for CPU1" "Secure only,Secure/Non-secure" textline " " bitfld.long 0x00 8. " GCPU0 ,Global timer for CPU0" "Secure only,Secure/Non-secure" bitfld.long 0x00 7. " TCPU3 ,Private timer for CPU3 Access" "Secure only,Secure/Non-secure" bitfld.long 0x00 6. " TCPU2 ,Private timer for CPU2 Access" "Secure only,Secure/Non-secure" textline " " bitfld.long 0x00 5. " TCPU1 ,Private timer for CPU1 Access" "Secure only,Secure/Non-secure" bitfld.long 0x00 4. " TCPU0 ,Private timer for CPU0 Access" "Secure only,Secure/Non-secure" bitfld.long 0x00 3. " CPU3 ,CPU3 Access the SAC" "No access,Access" textline " " bitfld.long 0x00 2. " CPU2 ,CPU2 Access the SAC" "No access,Access" bitfld.long 0x00 1. " CPU1 ,CPU1 Access the SAC" "No access,Access" bitfld.long 0x00 0. " CPU0 ,CPU0 Access the SAC" "No access,Access" tree.end width 0xb width 8. tree "Timer and Watchdog Blocks" base ad:(d.l(c15:0x400f))+0x600 group.long 0x00++0xb "Timer" line.long 0x00 "TLR,Timer Load Register" line.long 0x04 "TCR,Timer Counter Register" line.long 0x08 "TCONR,Timer Control Register" hexmask.long.byte 0x08 8.--15. 1. " PRES ,Prescaler" bitfld.long 0x08 3. " AINC ,Auto Increment" "Single shot,Auto increment" bitfld.long 0x08 2. " IRQEN ,IRQ Enable" "Disabled,Enabled" bitfld.long 0x08 1. " COMPEN ,Comp Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 0. " TEN ,Global Timer Enable" "Disabled,Enabled" group.long 0x0c++0x3 line.long 0x00 "TISR,Timer Interrupt Status Register" eventfld.long 0x00 0. " EFLAG ,Event Flag" "0,1" group.long 0x20++0x13 "Watchdog" line.long 0x00 "WLR,Watchdog Load Register" line.long 0x04 "WCR,Watchdog Counter Register" line.long 0x08 "WCONR,Watchdog Control Register" hexmask.long.byte 0x08 8.--15. 1. " PRES ,Prescaler" bitfld.long 0x08 3. " WDM ,WD Mode" "Timer,Watchdog" bitfld.long 0x08 2. " ITEN ,IT Enable" "Disabled,Enabled" bitfld.long 0x08 1. " AREL ,Auto-Reload" "Single shot,Auto-reload" textline " " bitfld.long 0x08 0. " WEN ,Watchdog Enable" "Disabled,Enabled" line.long 0x0c "WISR,Watchdog Interrupt Status Register" eventfld.long 0x0C 0. " EFLAG ,Event Flag" "0,1" line.long 0x10 "WRSR,Watchdog Reset Sent Register" eventfld.long 0x10 0. " RFLAG ,Reset Flag" "No effect,Reset" wgroup.long 0x34++0x3 line.long 0x00 "WDR,Watchdog Disable Register" base ad:(d.l(c15:0x400f))+0x200 group.long 0x00++0xb "Global Timer" line.long 0x00 "GTLCR,Lower 32-bit Timer Counter Register" line.long 0x04 "GTUCR,Upper 32-bit Timer Counter Register" line.long 0x08 "GTCONR,Timer Control Register" hexmask.long.byte 0x08 8.--15. 1. " PRES ,Prescaler" bitfld.long 0x08 3. " AINC ,Auto Increment" "Single shot,Auto increment" bitfld.long 0x08 2. " IRQEN ,IRQ Enable" "Disabled,Enabled" bitfld.long 0x08 1. " COMPEN ,Comp Enable" "Disabled,Enabled" textline " " bitfld.long 0x08 0. " TEN ,Global Timer Enable" "Disabled,Enabled" group.long 0x0c++0x3 line.long 0x00 "GTSR,Timer Status Register" eventfld.long 0x00 0. " EFLAG ,Event Flag" "0,1" group.long 0x10++0xb line.long 0x00 "GTLCOMR,Lower 32-bit Comparator Register" line.long 0x04 "GTUCOMR,Upper 32-bit Comparator Register" line.long 0x08 "GTINCR,Auto-increment Register for Comparator" tree.end width 11. endif tree.open "Interrupt Controller (PL-390)" width 17. base AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000) tree "Distributor Interface" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x400)==0x400) if PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)) group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register (Secure access)" bitfld.long 0x00 1. " ENABLEGRP1 ,Global Interrupt Enable Group 1" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLEGRP0 ,Global Interrupt Enable Group 1" "Disabled,Enabled" else group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register (Non-secure access)" bitfld.long 0x00 0. " ENABLE ,Global enable for forwarding pending interrupts from the Distributor to the CPU interfaces" "Disabled,Enabled" endif else group.long 0x0000++0x03 line.long 0x00 "GICD_CTLR,Distributor Control Register" bitfld.long 0x00 0. " ENABLE ,Global enable for forwarding pending interrupts from the Distributor to the CPU interfaces" "Disabled,Enabled" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x400)==0x400) rgroup.long 0x0004++0x03 line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register" bitfld.long 0x00 11.--15. " LSPI ,Locable Shared Peripheral Interrupts" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10. " SECURITYEXTN ,Indicate whether interrupt controller implements the security extensions" "Not implemented,Implemented" textline " " bitfld.long 0x00 5.--7. " CPUNUMBER ,Indicates the number of implemented CPU interfaces" "1,2,3,4,?..." bitfld.long 0x00 0.--4. " ITLN ,Indicates the number of interrupts that the interrupt controller supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Up to 1020" else rgroup.long 0x0004++0x03 line.long 0x00 "GICD_TYPER,Interrupt Controller Type Register" bitfld.long 0x00 10. " SECURITYEXTN ,Indicates whether interrupt controller implements the security extensions" "Not implemented,Implemented" textline " " bitfld.long 0x00 5.--7. " CPUNUMBER ,Indicates the number of implemented CPU interfaces" "1,2,3,4,?..." bitfld.long 0x00 0.--4. " ITLN ,Indicates the number of interrupts that the interrupt controller supports" "Up to 32,Up to 64,Up to 96,Up to 128,Up to 160,Up to 192,Up to 224,Up to 256,Up to 288,Up to 320,Up to 352,Up to 384,Up to 416,Up to 448,Up to 480,Up to 512,Up to 544,Up to 576,Up to 608,Up to 640,Up to 672,Up to 704,Up to 736,Up to 768,Up to 800,Up to 832,Up to 864,Up to 896,Up to 928,Up to 960,Up to 992,Up to 1020" endif rgroup.long 0x0008++0x03 line.long 0x00 "GICD_IIDR,Distributor Implementer Identification Register" bitfld.long 0x00 24.--31. " PRODID ,Indicates the product ID" "PL390,PL390,GIC400,GIC400,?..." hexmask.long.word 0x00 12.--23. 1. " REV_NUM ,Returns the revision number of the GIC" textline " " hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" sif CPU.FEATURE(hypervisor)||CPU.FEATURE(secure) width 17. tree "Group/Security Registers" if PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x0080) group.long 0x0080++0x03 line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Secure Access)" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Group 0 (Secure),Group 1 (Non-secure)" else group.long 0x0080++0x03 line.long 0x0 "GICD_IGROUPR0,Interrupt Group Register 0 (Non-secure access)" bitfld.long 0x00 31. " GSB31 ,Group Status Bit 31" "Group 0,Group 1" bitfld.long 0x00 30. " GSB30 ,Group Status Bit 30" "Group 0,Group 1" bitfld.long 0x00 29. " GSB29 ,Group Status Bit 29" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB28 ,Group Status Bit 28" "Group 0,Group 1" bitfld.long 0x00 27. " GSB27 ,Group Status Bit 27" "Group 0,Group 1" bitfld.long 0x00 26. " GSB26 ,Group Status Bit 26" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB25 ,Group Status Bit 25" "Group 0,Group 1" bitfld.long 0x00 24. " GSB24 ,Group Status Bit 24" "Group 0,Group 1" bitfld.long 0x00 23. " GSB23 ,Group Status Bit 23" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB22 ,Group Status Bit 22" "Group 0,Group 1" bitfld.long 0x00 21. " GSB21 ,Group Status Bit 21" "Group 0,Group 1" bitfld.long 0x00 20. " GSB20 ,Group Status Bit 20" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB19 ,Group Status Bit 19" "Group 0,Group 1" bitfld.long 0x00 18. " GSB18 ,Group Status Bit 18" "Group 0,Group 1" bitfld.long 0x00 17. " GSB17 ,Group Status Bit 17" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB16 ,Group Status Bit 16" "Group 0,Group 1" bitfld.long 0x00 15. " GSB15 ,Group Status Bit 15" "Group 0,Group 1" bitfld.long 0x00 14. " GSB14 ,Group Status Bit 14" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB13 ,Group Status Bit 13" "Group 0,Group 1" bitfld.long 0x00 12. " GSB12 ,Group Status Bit 12" "Group 0,Group 1" bitfld.long 0x00 11. " GSB11 ,Group Status Bit 11" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB10 ,Group Status Bit 10" "Group 0,Group 1" bitfld.long 0x00 9. " GSB9 ,Group Status Bit 9" "Group 0,Group 1" bitfld.long 0x00 8. " GSB8 ,Group Status Bit 8" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB7 ,Group Status Bit 7" "Group 0,Group 1" bitfld.long 0x00 6. " GSB6 ,Group Status Bit 6" "Group 0,Group 1" bitfld.long 0x00 5. " GSB5 ,Group Status Bit 5" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB4 ,Group Status Bit 4" "Group 0,Group 1" bitfld.long 0x00 3. " GSB3 ,Group Status Bit 3" "Group 0,Group 1" bitfld.long 0x00 2. " GSB2 ,Group Status Bit 2" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB1 ,Group Status Bit 1" "Group 0,Group 1" bitfld.long 0x00 0. " GSB0 ,Group Status Bit 0" "Group 0,Group 1" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x01)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x0084)) group.long 0x0084++0x03 line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1 (Secure Access)" bitfld.long 0x00 31. " GSB63 ,Group Status Bit 63" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB62 ,Group Status Bit 62" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB61 ,Group Status Bit 61" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB60 ,Group Status Bit 60" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB59 ,Group Status Bit 59" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB58 ,Group Status Bit 58" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB57 ,Group Status Bit 57" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB56 ,Group Status Bit 56" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB55 ,Group Status Bit 55" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB54 ,Group Status Bit 54" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB53 ,Group Status Bit 53" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB52 ,Group Status Bit 52" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB51 ,Group Status Bit 51" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB50 ,Group Status Bit 50" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB49 ,Group Status Bit 49" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB48 ,Group Status Bit 48" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB47 ,Group Status Bit 47" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB46 ,Group Status Bit 46" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB45 ,Group Status Bit 45" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB44 ,Group Status Bit 44" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB43 ,Group Status Bit 43" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB42 ,Group Status Bit 42" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB41 ,Group Status Bit 41" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB40 ,Group Status Bit 40" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB39 ,Group Status Bit 39" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB38 ,Group Status Bit 38" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB37 ,Group Status Bit 37" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB36 ,Group Status Bit 36" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB35 ,Group Status Bit 35" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB34 ,Group Status Bit 34" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB33 ,Group Status Bit 33" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB32 ,Group Status Bit 32" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x01) group.long 0x0084++0x03 line.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1 (Non-secure access)" bitfld.long 0x00 31. " GSB63 ,Group Status Bit 63" "Group 0,Group 1" bitfld.long 0x00 30. " GSB62 ,Group Status Bit 62" "Group 0,Group 1" bitfld.long 0x00 29. " GSB61 ,Group Status Bit 61" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB60 ,Group Status Bit 60" "Group 0,Group 1" bitfld.long 0x00 27. " GSB59 ,Group Status Bit 59" "Group 0,Group 1" bitfld.long 0x00 26. " GSB58 ,Group Status Bit 58" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB57 ,Group Status Bit 57" "Group 0,Group 1" bitfld.long 0x00 24. " GSB56 ,Group Status Bit 56" "Group 0,Group 1" bitfld.long 0x00 23. " GSB55 ,Group Status Bit 55" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB54 ,Group Status Bit 54" "Group 0,Group 1" bitfld.long 0x00 21. " GSB53 ,Group Status Bit 53" "Group 0,Group 1" bitfld.long 0x00 20. " GSB52 ,Group Status Bit 52" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB51 ,Group Status Bit 51" "Group 0,Group 1" bitfld.long 0x00 18. " GSB50 ,Group Status Bit 50" "Group 0,Group 1" bitfld.long 0x00 17. " GSB49 ,Group Status Bit 49" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB48 ,Group Status Bit 48" "Group 0,Group 1" bitfld.long 0x00 15. " GSB47 ,Group Status Bit 47" "Group 0,Group 1" bitfld.long 0x00 14. " GSB46 ,Group Status Bit 46" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB45 ,Group Status Bit 45" "Group 0,Group 1" bitfld.long 0x00 12. " GSB44 ,Group Status Bit 44" "Group 0,Group 1" bitfld.long 0x00 11. " GSB43 ,Group Status Bit 43" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB42 ,Group Status Bit 42" "Group 0,Group 1" bitfld.long 0x00 9. " GSB41 ,Group Status Bit 41" "Group 0,Group 1" bitfld.long 0x00 8. " GSB40 ,Group Status Bit 40" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB39 ,Group Status Bit 39" "Group 0,Group 1" bitfld.long 0x00 6. " GSB38 ,Group Status Bit 38" "Group 0,Group 1" bitfld.long 0x00 5. " GSB37 ,Group Status Bit 37" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB36 ,Group Status Bit 36" "Group 0,Group 1" bitfld.long 0x00 3. " GSB35 ,Group Status Bit 35" "Group 0,Group 1" bitfld.long 0x00 2. " GSB34 ,Group Status Bit 34" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB33 ,Group Status Bit 33" "Group 0,Group 1" bitfld.long 0x00 0. " GSB32 ,Group Status Bit 32" "Group 0,Group 1" else hgroup.long 0x0084++0x03 hide.long 0x0 "GICD_IGROUPR1,Interrupt Group Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x02)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x0088)) group.long 0x0088++0x03 line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2 (Secure access)" bitfld.long 0x00 31. " GSB95 ,Group Status Bit 95" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB94 ,Group Status Bit 94" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB93 ,Group Status Bit 93" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB92 ,Group Status Bit 92" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB91 ,Group Status Bit 91" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB90 ,Group Status Bit 90" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB89 ,Group Status Bit 89" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB88 ,Group Status Bit 88" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB87 ,Group Status Bit 87" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB86 ,Group Status Bit 86" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB85 ,Group Status Bit 85" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB84 ,Group Status Bit 84" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB83 ,Group Status Bit 83" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB82 ,Group Status Bit 82" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB81 ,Group Status Bit 81" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB80 ,Group Status Bit 80" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB79 ,Group Status Bit 79" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB78 ,Group Status Bit 78" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB77 ,Group Status Bit 77" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB76 ,Group Status Bit 76" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB75 ,Group Status Bit 75" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB74 ,Group Status Bit 74" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB73 ,Group Status Bit 73" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB72 ,Group Status Bit 72" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB71 ,Group Status Bit 71" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB70 ,Group Status Bit 70" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB69 ,Group Status Bit 69" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB68 ,Group Status Bit 68" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB67 ,Group Status Bit 67" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB66 ,Group Status Bit 66" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB65 ,Group Status Bit 65" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB64 ,Group Status Bit 64" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x02) group.long 0x0088++0x03 line.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2 (Non-secure access)" bitfld.long 0x00 31. " GSB95 ,Group Status Bit 95" "Group 0,Group 1" bitfld.long 0x00 30. " GSB94 ,Group Status Bit 94" "Group 0,Group 1" bitfld.long 0x00 29. " GSB93 ,Group Status Bit 93" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB92 ,Group Status Bit 92" "Group 0,Group 1" bitfld.long 0x00 27. " GSB91 ,Group Status Bit 91" "Group 0,Group 1" bitfld.long 0x00 26. " GSB90 ,Group Status Bit 90" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB89 ,Group Status Bit 89" "Group 0,Group 1" bitfld.long 0x00 24. " GSB88 ,Group Status Bit 88" "Group 0,Group 1" bitfld.long 0x00 23. " GSB87 ,Group Status Bit 87" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB86 ,Group Status Bit 86" "Group 0,Group 1" bitfld.long 0x00 21. " GSB85 ,Group Status Bit 85" "Group 0,Group 1" bitfld.long 0x00 20. " GSB84 ,Group Status Bit 84" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB83 ,Group Status Bit 83" "Group 0,Group 1" bitfld.long 0x00 18. " GSB82 ,Group Status Bit 82" "Group 0,Group 1" bitfld.long 0x00 17. " GSB81 ,Group Status Bit 81" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB80 ,Group Status Bit 80" "Group 0,Group 1" bitfld.long 0x00 15. " GSB79 ,Group Status Bit 79" "Group 0,Group 1" bitfld.long 0x00 14. " GSB78 ,Group Status Bit 78" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB77 ,Group Status Bit 77" "Group 0,Group 1" bitfld.long 0x00 12. " GSB76 ,Group Status Bit 76" "Group 0,Group 1" bitfld.long 0x00 11. " GSB75 ,Group Status Bit 75" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB74 ,Group Status Bit 74" "Group 0,Group 1" bitfld.long 0x00 9. " GSB73 ,Group Status Bit 73" "Group 0,Group 1" bitfld.long 0x00 8. " GSB72 ,Group Status Bit 72" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB71 ,Group Status Bit 71" "Group 0,Group 1" bitfld.long 0x00 6. " GSB70 ,Group Status Bit 70" "Group 0,Group 1" bitfld.long 0x00 5. " GSB69 ,Group Status Bit 69" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB68 ,Group Status Bit 68" "Group 0,Group 1" bitfld.long 0x00 3. " GSB67 ,Group Status Bit 67" "Group 0,Group 1" bitfld.long 0x00 2. " GSB66 ,Group Status Bit 66" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB65 ,Group Status Bit 65" "Group 0,Group 1" bitfld.long 0x00 0. " GSB64 ,Group Status Bit 64" "Group 0,Group 1" else hgroup.long 0x0088++0x03 hide.long 0x0 "GICD_IGROUPR2,Interrupt Group Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x03)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x008C)) group.long 0x008C++0x03 line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3 (Secure access)" bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB126 ,Group Status Bit 126" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB125 ,Group Status Bit 125" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB123 ,Group Status Bit 123" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB122 ,Group Status Bit 122" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB120 ,Group Status Bit 120" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB119 ,Group Status Bit 119" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB117 ,Group Status Bit 117" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB116 ,Group Status Bit 116" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB114 ,Group Status Bit 114" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB113 ,Group Status Bit 113" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB111 ,Group Status Bit 111" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB110 ,Group Status Bit 110" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB108 ,Group Status Bit 108" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB107 ,Group Status Bit 107" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB105 ,Group Status Bit 105" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB104 ,Group Status Bit 104" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB102 ,Group Status Bit 102" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB101 ,Group Status Bit 101" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB99 ,Group Status Bit 99" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB98 ,Group Status Bit 98" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB97 ,Group Status Bit 97" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB96 ,Group Status Bit 96" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x03) group.long 0x008C++0x03 line.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3 (Non-secure access)" bitfld.long 0x00 31. " GSB127 ,Group Status Bit 127" "Group 0,Group 1" bitfld.long 0x00 30. " GSB126 ,Group Status Bit 126" "Group 0,Group 1" bitfld.long 0x00 29. " GSB125 ,Group Status Bit 125" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB124 ,Group Status Bit 124" "Group 0,Group 1" bitfld.long 0x00 27. " GSB123 ,Group Status Bit 123" "Group 0,Group 1" bitfld.long 0x00 26. " GSB122 ,Group Status Bit 122" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB121 ,Group Status Bit 121" "Group 0,Group 1" bitfld.long 0x00 24. " GSB120 ,Group Status Bit 120" "Group 0,Group 1" bitfld.long 0x00 23. " GSB119 ,Group Status Bit 119" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB118 ,Group Status Bit 118" "Group 0,Group 1" bitfld.long 0x00 21. " GSB117 ,Group Status Bit 117" "Group 0,Group 1" bitfld.long 0x00 20. " GSB116 ,Group Status Bit 116" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB115 ,Group Status Bit 115" "Group 0,Group 1" bitfld.long 0x00 18. " GSB114 ,Group Status Bit 114" "Group 0,Group 1" bitfld.long 0x00 17. " GSB113 ,Group Status Bit 113" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB112 ,Group Status Bit 112" "Group 0,Group 1" bitfld.long 0x00 15. " GSB111 ,Group Status Bit 111" "Group 0,Group 1" bitfld.long 0x00 14. " GSB110 ,Group Status Bit 110" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB109 ,Group Status Bit 109" "Group 0,Group 1" bitfld.long 0x00 12. " GSB108 ,Group Status Bit 108" "Group 0,Group 1" bitfld.long 0x00 11. " GSB107 ,Group Status Bit 107" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB106 ,Group Status Bit 106" "Group 0,Group 1" bitfld.long 0x00 9. " GSB105 ,Group Status Bit 105" "Group 0,Group 1" bitfld.long 0x00 8. " GSB104 ,Group Status Bit 104" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB103 ,Group Status Bit 103" "Group 0,Group 1" bitfld.long 0x00 6. " GSB102 ,Group Status Bit 102" "Group 0,Group 1" bitfld.long 0x00 5. " GSB101 ,Group Status Bit 101" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB100 ,Group Status Bit 100" "Group 0,Group 1" bitfld.long 0x00 3. " GSB99 ,Group Status Bit 99" "Group 0,Group 1" bitfld.long 0x00 2. " GSB98 ,Group Status Bit 98" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB97 ,Group Status Bit 97" "Group 0,Group 1" bitfld.long 0x00 0. " GSB96 ,Group Status Bit 96" "Group 0,Group 1" else hgroup.long 0x008C++0x03 hide.long 0x0 "GICD_IGROUPR3,Interrupt Group Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x04)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x0090)) group.long 0x0090++0x03 line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4 (Secure access)" bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB158 ,Group Status Bit 158" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB157 ,Group Status Bit 157" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB155 ,Group Status Bit 155" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB154 ,Group Status Bit 154" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB152 ,Group Status Bit 152" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB151 ,Group Status Bit 151" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB149 ,Group Status Bit 149" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB148 ,Group Status Bit 148" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB146 ,Group Status Bit 146" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB145 ,Group Status Bit 145" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB143 ,Group Status Bit 143" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB142 ,Group Status Bit 142" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB140 ,Group Status Bit 140" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB139 ,Group Status Bit 139" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB137 ,Group Status Bit 137" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB136 ,Group Status Bit 136" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB134 ,Group Status Bit 134" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB133 ,Group Status Bit 133" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB131 ,Group Status Bit 131" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB130 ,Group Status Bit 130" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB128 ,Group Status Bit 128" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x04) group.long 0x0090++0x03 line.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4 (Non-secure access)" bitfld.long 0x00 31. " GSB159 ,Group Status Bit 159" "Group 0,Group 1" bitfld.long 0x00 30. " GSB158 ,Group Status Bit 158" "Group 0,Group 1" bitfld.long 0x00 29. " GSB157 ,Group Status Bit 157" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB156 ,Group Status Bit 156" "Group 0,Group 1" bitfld.long 0x00 27. " GSB155 ,Group Status Bit 155" "Group 0,Group 1" bitfld.long 0x00 26. " GSB154 ,Group Status Bit 154" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB153 ,Group Status Bit 153" "Group 0,Group 1" bitfld.long 0x00 24. " GSB152 ,Group Status Bit 152" "Group 0,Group 1" bitfld.long 0x00 23. " GSB151 ,Group Status Bit 151" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB150 ,Group Status Bit 150" "Group 0,Group 1" bitfld.long 0x00 21. " GSB149 ,Group Status Bit 149" "Group 0,Group 1" bitfld.long 0x00 20. " GSB148 ,Group Status Bit 148" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB147 ,Group Status Bit 147" "Group 0,Group 1" bitfld.long 0x00 18. " GSB146 ,Group Status Bit 146" "Group 0,Group 1" bitfld.long 0x00 17. " GSB145 ,Group Status Bit 145" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB144 ,Group Status Bit 144" "Group 0,Group 1" bitfld.long 0x00 15. " GSB143 ,Group Status Bit 143" "Group 0,Group 1" bitfld.long 0x00 14. " GSB142 ,Group Status Bit 142" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB141 ,Group Status Bit 141" "Group 0,Group 1" bitfld.long 0x00 12. " GSB140 ,Group Status Bit 140" "Group 0,Group 1" bitfld.long 0x00 11. " GSB139 ,Group Status Bit 139" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB138 ,Group Status Bit 138" "Group 0,Group 1" bitfld.long 0x00 9. " GSB137 ,Group Status Bit 137" "Group 0,Group 1" bitfld.long 0x00 8. " GSB136 ,Group Status Bit 136" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB135 ,Group Status Bit 135" "Group 0,Group 1" bitfld.long 0x00 6. " GSB134 ,Group Status Bit 134" "Group 0,Group 1" bitfld.long 0x00 5. " GSB133 ,Group Status Bit 133" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB132 ,Group Status Bit 132" "Group 0,Group 1" bitfld.long 0x00 3. " GSB131 ,Group Status Bit 131" "Group 0,Group 1" bitfld.long 0x00 2. " GSB130 ,Group Status Bit 130" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB129 ,Group Status Bit 129" "Group 0,Group 1" bitfld.long 0x00 0. " GSB128 ,Group Status Bit 128" "Group 0,Group 1" else hgroup.long 0x0090++0x03 hide.long 0x0 "GICD_IGROUPR4,Interrupt Group Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x05)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x0094)) group.long 0x0094++0x03 line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5 (Secure access)" bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB190 ,Group Status Bit 190" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB189 ,Group Status Bit 189" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB187 ,Group Status Bit 187" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB186 ,Group Status Bit 186" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB184 ,Group Status Bit 184" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB183 ,Group Status Bit 183" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB181 ,Group Status Bit 181" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB180 ,Group Status Bit 180" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB178 ,Group Status Bit 178" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB177 ,Group Status Bit 177" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB175 ,Group Status Bit 175" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB174 ,Group Status Bit 174" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB172 ,Group Status Bit 172" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB171 ,Group Status Bit 171" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB169 ,Group Status Bit 169" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB168 ,Group Status Bit 168" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB166 ,Group Status Bit 166" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB165 ,Group Status Bit 165" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB163 ,Group Status Bit 163" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB162 ,Group Status Bit 162" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB160 ,Group Status Bit 160" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x05) group.long 0x0094++0x03 line.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5 (Non-secure access)" bitfld.long 0x00 31. " GSB191 ,Group Status Bit 191" "Group 0,Group 1" bitfld.long 0x00 30. " GSB190 ,Group Status Bit 190" "Group 0,Group 1" bitfld.long 0x00 29. " GSB189 ,Group Status Bit 189" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB188 ,Group Status Bit 188" "Group 0,Group 1" bitfld.long 0x00 27. " GSB187 ,Group Status Bit 187" "Group 0,Group 1" bitfld.long 0x00 26. " GSB186 ,Group Status Bit 186" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB185 ,Group Status Bit 185" "Group 0,Group 1" bitfld.long 0x00 24. " GSB184 ,Group Status Bit 184" "Group 0,Group 1" bitfld.long 0x00 23. " GSB183 ,Group Status Bit 183" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB182 ,Group Status Bit 182" "Group 0,Group 1" bitfld.long 0x00 21. " GSB181 ,Group Status Bit 181" "Group 0,Group 1" bitfld.long 0x00 20. " GSB180 ,Group Status Bit 180" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB179 ,Group Status Bit 179" "Group 0,Group 1" bitfld.long 0x00 18. " GSB178 ,Group Status Bit 178" "Group 0,Group 1" bitfld.long 0x00 17. " GSB177 ,Group Status Bit 177" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB176 ,Group Status Bit 176" "Group 0,Group 1" bitfld.long 0x00 15. " GSB175 ,Group Status Bit 175" "Group 0,Group 1" bitfld.long 0x00 14. " GSB174 ,Group Status Bit 174" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB173 ,Group Status Bit 173" "Group 0,Group 1" bitfld.long 0x00 12. " GSB172 ,Group Status Bit 172" "Group 0,Group 1" bitfld.long 0x00 11. " GSB171 ,Group Status Bit 171" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB170 ,Group Status Bit 170" "Group 0,Group 1" bitfld.long 0x00 9. " GSB169 ,Group Status Bit 169" "Group 0,Group 1" bitfld.long 0x00 8. " GSB168 ,Group Status Bit 168" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB167 ,Group Status Bit 167" "Group 0,Group 1" bitfld.long 0x00 6. " GSB166 ,Group Status Bit 166" "Group 0,Group 1" bitfld.long 0x00 5. " GSB165 ,Group Status Bit 165" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB164 ,Group Status Bit 164" "Group 0,Group 1" bitfld.long 0x00 3. " GSB163 ,Group Status Bit 163" "Group 0,Group 1" bitfld.long 0x00 2. " GSB162 ,Group Status Bit 162" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB161 ,Group Status Bit 161" "Group 0,Group 1" bitfld.long 0x00 0. " GSB160 ,Group Status Bit 160" "Group 0,Group 1" else hgroup.long 0x0094++0x03 hide.long 0x0 "GICD_IGROUPR5,Interrupt Group Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x06)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x0098)) group.long 0x0098++0x03 line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6 (Secure access)" bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB222 ,Group Status Bit 222" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB221 ,Group Status Bit 221" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB219 ,Group Status Bit 219" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB218 ,Group Status Bit 218" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB216 ,Group Status Bit 216" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB215 ,Group Status Bit 215" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB213 ,Group Status Bit 213" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB212 ,Group Status Bit 212" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB210 ,Group Status Bit 210" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB209 ,Group Status Bit 209" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB207 ,Group Status Bit 207" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB206 ,Group Status Bit 206" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB204 ,Group Status Bit 204" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB203 ,Group Status Bit 203" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB201 ,Group Status Bit 201" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB200 ,Group Status Bit 200" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB198 ,Group Status Bit 198" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB197 ,Group Status Bit 197" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB195 ,Group Status Bit 195" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB194 ,Group Status Bit 194" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB192 ,Group Status Bit 192" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x06) group.long 0x0098++0x03 line.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6 (Non-secure access)" bitfld.long 0x00 31. " GSB223 ,Group Status Bit 223" "Group 0,Group 1" bitfld.long 0x00 30. " GSB222 ,Group Status Bit 222" "Group 0,Group 1" bitfld.long 0x00 29. " GSB221 ,Group Status Bit 221" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB220 ,Group Status Bit 220" "Group 0,Group 1" bitfld.long 0x00 27. " GSB219 ,Group Status Bit 219" "Group 0,Group 1" bitfld.long 0x00 26. " GSB218 ,Group Status Bit 218" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB217 ,Group Status Bit 217" "Group 0,Group 1" bitfld.long 0x00 24. " GSB216 ,Group Status Bit 216" "Group 0,Group 1" bitfld.long 0x00 23. " GSB215 ,Group Status Bit 215" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB214 ,Group Status Bit 214" "Group 0,Group 1" bitfld.long 0x00 21. " GSB213 ,Group Status Bit 213" "Group 0,Group 1" bitfld.long 0x00 20. " GSB212 ,Group Status Bit 212" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB211 ,Group Status Bit 211" "Group 0,Group 1" bitfld.long 0x00 18. " GSB210 ,Group Status Bit 210" "Group 0,Group 1" bitfld.long 0x00 17. " GSB209 ,Group Status Bit 209" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB208 ,Group Status Bit 208" "Group 0,Group 1" bitfld.long 0x00 15. " GSB207 ,Group Status Bit 207" "Group 0,Group 1" bitfld.long 0x00 14. " GSB206 ,Group Status Bit 206" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB205 ,Group Status Bit 205" "Group 0,Group 1" bitfld.long 0x00 12. " GSB204 ,Group Status Bit 204" "Group 0,Group 1" bitfld.long 0x00 11. " GSB203 ,Group Status Bit 203" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB202 ,Group Status Bit 202" "Group 0,Group 1" bitfld.long 0x00 9. " GSB201 ,Group Status Bit 201" "Group 0,Group 1" bitfld.long 0x00 8. " GSB200 ,Group Status Bit 200" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB199 ,Group Status Bit 199" "Group 0,Group 1" bitfld.long 0x00 6. " GSB198 ,Group Status Bit 198" "Group 0,Group 1" bitfld.long 0x00 5. " GSB197 ,Group Status Bit 197" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB196 ,Group Status Bit 196" "Group 0,Group 1" bitfld.long 0x00 3. " GSB195 ,Group Status Bit 195" "Group 0,Group 1" bitfld.long 0x00 2. " GSB194 ,Group Status Bit 194" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB193 ,Group Status Bit 193" "Group 0,Group 1" bitfld.long 0x00 0. " GSB192 ,Group Status Bit 192" "Group 0,Group 1" else hgroup.long 0x0098++0x03 hide.long 0x0 "GICD_IGROUPR6,Interrupt Group Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x07)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x009C)) group.long 0x009C++0x03 line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7 (Secure access)" bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB254 ,Group Status Bit 254" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB253 ,Group Status Bit 253" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB251 ,Group Status Bit 251" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB250 ,Group Status Bit 250" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB248 ,Group Status Bit 248" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB247 ,Group Status Bit 247" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB245 ,Group Status Bit 245" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB244 ,Group Status Bit 244" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB242 ,Group Status Bit 242" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB241 ,Group Status Bit 241" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB239 ,Group Status Bit 239" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB238 ,Group Status Bit 238" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB236 ,Group Status Bit 236" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB235 ,Group Status Bit 235" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB233 ,Group Status Bit 233" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB232 ,Group Status Bit 232" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB230 ,Group Status Bit 230" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB229 ,Group Status Bit 229" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB227 ,Group Status Bit 227" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB226 ,Group Status Bit 226" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB224 ,Group Status Bit 224" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x07) group.long 0x009C++0x03 line.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7 (Non-secure access)" bitfld.long 0x00 31. " GSB255 ,Group Status Bit 255" "Group 0,Group 1" bitfld.long 0x00 30. " GSB254 ,Group Status Bit 254" "Group 0,Group 1" bitfld.long 0x00 29. " GSB253 ,Group Status Bit 253" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB252 ,Group Status Bit 252" "Group 0,Group 1" bitfld.long 0x00 27. " GSB251 ,Group Status Bit 251" "Group 0,Group 1" bitfld.long 0x00 26. " GSB250 ,Group Status Bit 250" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB249 ,Group Status Bit 249" "Group 0,Group 1" bitfld.long 0x00 24. " GSB248 ,Group Status Bit 248" "Group 0,Group 1" bitfld.long 0x00 23. " GSB247 ,Group Status Bit 247" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB246 ,Group Status Bit 246" "Group 0,Group 1" bitfld.long 0x00 21. " GSB245 ,Group Status Bit 245" "Group 0,Group 1" bitfld.long 0x00 20. " GSB244 ,Group Status Bit 244" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB243 ,Group Status Bit 243" "Group 0,Group 1" bitfld.long 0x00 18. " GSB242 ,Group Status Bit 242" "Group 0,Group 1" bitfld.long 0x00 17. " GSB241 ,Group Status Bit 241" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB240 ,Group Status Bit 240" "Group 0,Group 1" bitfld.long 0x00 15. " GSB239 ,Group Status Bit 239" "Group 0,Group 1" bitfld.long 0x00 14. " GSB238 ,Group Status Bit 238" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB237 ,Group Status Bit 237" "Group 0,Group 1" bitfld.long 0x00 12. " GSB236 ,Group Status Bit 236" "Group 0,Group 1" bitfld.long 0x00 11. " GSB235 ,Group Status Bit 235" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB234 ,Group Status Bit 234" "Group 0,Group 1" bitfld.long 0x00 9. " GSB233 ,Group Status Bit 233" "Group 0,Group 1" bitfld.long 0x00 8. " GSB232 ,Group Status Bit 232" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB231 ,Group Status Bit 231" "Group 0,Group 1" bitfld.long 0x00 6. " GSB230 ,Group Status Bit 230" "Group 0,Group 1" bitfld.long 0x00 5. " GSB229 ,Group Status Bit 229" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB228 ,Group Status Bit 228" "Group 0,Group 1" bitfld.long 0x00 3. " GSB227 ,Group Status Bit 227" "Group 0,Group 1" bitfld.long 0x00 2. " GSB226 ,Group Status Bit 226" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB225 ,Group Status Bit 225" "Group 0,Group 1" bitfld.long 0x00 0. " GSB224 ,Group Status Bit 224" "Group 0,Group 1" else hgroup.long 0x009C++0x03 hide.long 0x0 "GICD_IGROUPR7,Interrupt Group Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x08)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00A0)) group.long 0x00A0++0x03 line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8 (Secure access)" bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB286 ,Group Status Bit 286" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB285 ,Group Status Bit 285" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB283 ,Group Status Bit 283" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB282 ,Group Status Bit 282" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB280 ,Group Status Bit 280" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB279 ,Group Status Bit 279" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB277 ,Group Status Bit 277" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB276 ,Group Status Bit 276" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB274 ,Group Status Bit 274" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB273 ,Group Status Bit 273" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB271 ,Group Status Bit 271" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB270 ,Group Status Bit 270" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB268 ,Group Status Bit 268" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB267 ,Group Status Bit 267" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB265 ,Group Status Bit 265" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB264 ,Group Status Bit 264" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB262 ,Group Status Bit 262" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB261 ,Group Status Bit 261" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB259 ,Group Status Bit 259" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB258 ,Group Status Bit 258" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB256 ,Group Status Bit 256" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x08) group.long 0x00A0++0x03 line.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8 (Non-secure access)" bitfld.long 0x00 31. " GSB287 ,Group Status Bit 287" "Group 0,Group 1" bitfld.long 0x00 30. " GSB286 ,Group Status Bit 286" "Group 0,Group 1" bitfld.long 0x00 29. " GSB285 ,Group Status Bit 285" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB284 ,Group Status Bit 284" "Group 0,Group 1" bitfld.long 0x00 27. " GSB283 ,Group Status Bit 283" "Group 0,Group 1" bitfld.long 0x00 26. " GSB282 ,Group Status Bit 282" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB281 ,Group Status Bit 281" "Group 0,Group 1" bitfld.long 0x00 24. " GSB280 ,Group Status Bit 280" "Group 0,Group 1" bitfld.long 0x00 23. " GSB279 ,Group Status Bit 279" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB278 ,Group Status Bit 278" "Group 0,Group 1" bitfld.long 0x00 21. " GSB277 ,Group Status Bit 277" "Group 0,Group 1" bitfld.long 0x00 20. " GSB276 ,Group Status Bit 276" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB275 ,Group Status Bit 275" "Group 0,Group 1" bitfld.long 0x00 18. " GSB274 ,Group Status Bit 274" "Group 0,Group 1" bitfld.long 0x00 17. " GSB273 ,Group Status Bit 273" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB272 ,Group Status Bit 272" "Group 0,Group 1" bitfld.long 0x00 15. " GSB271 ,Group Status Bit 271" "Group 0,Group 1" bitfld.long 0x00 14. " GSB270 ,Group Status Bit 270" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB269 ,Group Status Bit 269" "Group 0,Group 1" bitfld.long 0x00 12. " GSB268 ,Group Status Bit 268" "Group 0,Group 1" bitfld.long 0x00 11. " GSB267 ,Group Status Bit 267" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB266 ,Group Status Bit 266" "Group 0,Group 1" bitfld.long 0x00 9. " GSB265 ,Group Status Bit 265" "Group 0,Group 1" bitfld.long 0x00 8. " GSB264 ,Group Status Bit 264" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB263 ,Group Status Bit 263" "Group 0,Group 1" bitfld.long 0x00 6. " GSB262 ,Group Status Bit 262" "Group 0,Group 1" bitfld.long 0x00 5. " GSB261 ,Group Status Bit 261" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB260 ,Group Status Bit 260" "Group 0,Group 1" bitfld.long 0x00 3. " GSB259 ,Group Status Bit 259" "Group 0,Group 1" bitfld.long 0x00 2. " GSB258 ,Group Status Bit 258" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB257 ,Group Status Bit 257" "Group 0,Group 1" bitfld.long 0x00 0. " GSB256 ,Group Status Bit 256" "Group 0,Group 1" else hgroup.long 0x00A0++0x03 hide.long 0x0 "GICD_IGROUPR8,Interrupt Group Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x09)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00A4)) group.long 0x00A4++0x03 line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9 (Secure access)" bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB318 ,Group Status Bit 318" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB317 ,Group Status Bit 317" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB315 ,Group Status Bit 315" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB314 ,Group Status Bit 314" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB312 ,Group Status Bit 312" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB311 ,Group Status Bit 311" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB309 ,Group Status Bit 309" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB308 ,Group Status Bit 308" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB306 ,Group Status Bit 306" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB305 ,Group Status Bit 305" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB303 ,Group Status Bit 303" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB302 ,Group Status Bit 302" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB300 ,Group Status Bit 300" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB299 ,Group Status Bit 299" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB297 ,Group Status Bit 297" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB296 ,Group Status Bit 296" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB294 ,Group Status Bit 294" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB293 ,Group Status Bit 293" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB291 ,Group Status Bit 291" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB290 ,Group Status Bit 290" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB288 ,Group Status Bit 288" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x09) group.long 0x00A4++0x03 line.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9 (Non-secure access)" bitfld.long 0x00 31. " GSB319 ,Group Status Bit 319" "Group 0,Group 1" bitfld.long 0x00 30. " GSB318 ,Group Status Bit 318" "Group 0,Group 1" bitfld.long 0x00 29. " GSB317 ,Group Status Bit 317" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB316 ,Group Status Bit 316" "Group 0,Group 1" bitfld.long 0x00 27. " GSB315 ,Group Status Bit 315" "Group 0,Group 1" bitfld.long 0x00 26. " GSB314 ,Group Status Bit 314" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB313 ,Group Status Bit 313" "Group 0,Group 1" bitfld.long 0x00 24. " GSB312 ,Group Status Bit 312" "Group 0,Group 1" bitfld.long 0x00 23. " GSB311 ,Group Status Bit 311" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB310 ,Group Status Bit 310" "Group 0,Group 1" bitfld.long 0x00 21. " GSB309 ,Group Status Bit 309" "Group 0,Group 1" bitfld.long 0x00 20. " GSB308 ,Group Status Bit 308" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB307 ,Group Status Bit 307" "Group 0,Group 1" bitfld.long 0x00 18. " GSB306 ,Group Status Bit 306" "Group 0,Group 1" bitfld.long 0x00 17. " GSB305 ,Group Status Bit 305" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB304 ,Group Status Bit 304" "Group 0,Group 1" bitfld.long 0x00 15. " GSB303 ,Group Status Bit 303" "Group 0,Group 1" bitfld.long 0x00 14. " GSB302 ,Group Status Bit 302" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB301 ,Group Status Bit 301" "Group 0,Group 1" bitfld.long 0x00 12. " GSB300 ,Group Status Bit 300" "Group 0,Group 1" bitfld.long 0x00 11. " GSB299 ,Group Status Bit 299" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB298 ,Group Status Bit 298" "Group 0,Group 1" bitfld.long 0x00 9. " GSB297 ,Group Status Bit 297" "Group 0,Group 1" bitfld.long 0x00 8. " GSB296 ,Group Status Bit 296" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB295 ,Group Status Bit 295" "Group 0,Group 1" bitfld.long 0x00 6. " GSB294 ,Group Status Bit 294" "Group 0,Group 1" bitfld.long 0x00 5. " GSB293 ,Group Status Bit 293" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB292 ,Group Status Bit 292" "Group 0,Group 1" bitfld.long 0x00 3. " GSB291 ,Group Status Bit 291" "Group 0,Group 1" bitfld.long 0x00 2. " GSB290 ,Group Status Bit 290" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB289 ,Group Status Bit 289" "Group 0,Group 1" bitfld.long 0x00 0. " GSB288 ,Group Status Bit 288" "Group 0,Group 1" else hgroup.long 0x00A4++0x03 hide.long 0x0 "GICD_IGROUPR9,Interrupt Group Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0A)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00A8)) group.long 0x00A8++0x03 line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Secure access)" bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB350 ,Group Status Bit 350" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB349 ,Group Status Bit 349" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB347 ,Group Status Bit 347" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB346 ,Group Status Bit 346" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB344 ,Group Status Bit 344" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB343 ,Group Status Bit 343" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB341 ,Group Status Bit 341" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB340 ,Group Status Bit 340" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB338 ,Group Status Bit 338" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB337 ,Group Status Bit 337" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB335 ,Group Status Bit 335" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB334 ,Group Status Bit 334" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB332 ,Group Status Bit 332" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB331 ,Group Status Bit 331" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB329 ,Group Status Bit 329" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB328 ,Group Status Bit 328" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB326 ,Group Status Bit 326" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB325 ,Group Status Bit 325" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB323 ,Group Status Bit 323" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB322 ,Group Status Bit 322" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB320 ,Group Status Bit 320" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0A) group.long 0x00A8++0x03 line.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10 (Non-secure access)" bitfld.long 0x00 31. " GSB351 ,Group Status Bit 351" "Group 0,Group 1" bitfld.long 0x00 30. " GSB350 ,Group Status Bit 350" "Group 0,Group 1" bitfld.long 0x00 29. " GSB349 ,Group Status Bit 349" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB348 ,Group Status Bit 348" "Group 0,Group 1" bitfld.long 0x00 27. " GSB347 ,Group Status Bit 347" "Group 0,Group 1" bitfld.long 0x00 26. " GSB346 ,Group Status Bit 346" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB345 ,Group Status Bit 345" "Group 0,Group 1" bitfld.long 0x00 24. " GSB344 ,Group Status Bit 344" "Group 0,Group 1" bitfld.long 0x00 23. " GSB343 ,Group Status Bit 343" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB342 ,Group Status Bit 342" "Group 0,Group 1" bitfld.long 0x00 21. " GSB341 ,Group Status Bit 341" "Group 0,Group 1" bitfld.long 0x00 20. " GSB340 ,Group Status Bit 340" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB339 ,Group Status Bit 339" "Group 0,Group 1" bitfld.long 0x00 18. " GSB338 ,Group Status Bit 338" "Group 0,Group 1" bitfld.long 0x00 17. " GSB337 ,Group Status Bit 337" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB336 ,Group Status Bit 336" "Group 0,Group 1" bitfld.long 0x00 15. " GSB335 ,Group Status Bit 335" "Group 0,Group 1" bitfld.long 0x00 14. " GSB334 ,Group Status Bit 334" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB333 ,Group Status Bit 333" "Group 0,Group 1" bitfld.long 0x00 12. " GSB332 ,Group Status Bit 332" "Group 0,Group 1" bitfld.long 0x00 11. " GSB331 ,Group Status Bit 331" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB330 ,Group Status Bit 330" "Group 0,Group 1" bitfld.long 0x00 9. " GSB329 ,Group Status Bit 329" "Group 0,Group 1" bitfld.long 0x00 8. " GSB328 ,Group Status Bit 328" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB327 ,Group Status Bit 327" "Group 0,Group 1" bitfld.long 0x00 6. " GSB326 ,Group Status Bit 326" "Group 0,Group 1" bitfld.long 0x00 5. " GSB325 ,Group Status Bit 325" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB324 ,Group Status Bit 324" "Group 0,Group 1" bitfld.long 0x00 3. " GSB323 ,Group Status Bit 323" "Group 0,Group 1" bitfld.long 0x00 2. " GSB322 ,Group Status Bit 322" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB321 ,Group Status Bit 321" "Group 0,Group 1" bitfld.long 0x00 0. " GSB320 ,Group Status Bit 320" "Group 0,Group 1" else hgroup.long 0x00A8++0x03 hide.long 0x0 "GICD_IGROUPR10,Interrupt Group Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0B)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00AC)) group.long 0x00AC++0x03 line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Secure access)" bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB382 ,Group Status Bit 382" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB381 ,Group Status Bit 381" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB379 ,Group Status Bit 379" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB378 ,Group Status Bit 378" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB376 ,Group Status Bit 376" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB375 ,Group Status Bit 375" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB373 ,Group Status Bit 373" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB372 ,Group Status Bit 372" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB370 ,Group Status Bit 370" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB369 ,Group Status Bit 369" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB367 ,Group Status Bit 367" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB366 ,Group Status Bit 366" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB364 ,Group Status Bit 364" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB363 ,Group Status Bit 363" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB361 ,Group Status Bit 361" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB360 ,Group Status Bit 360" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB358 ,Group Status Bit 358" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB357 ,Group Status Bit 357" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB355 ,Group Status Bit 355" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB354 ,Group Status Bit 354" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB352 ,Group Status Bit 352" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0B) group.long 0x00AC++0x03 line.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11 (Non-secure access)" bitfld.long 0x00 31. " GSB383 ,Group Status Bit 383" "Group 0,Group 1" bitfld.long 0x00 30. " GSB382 ,Group Status Bit 382" "Group 0,Group 1" bitfld.long 0x00 29. " GSB381 ,Group Status Bit 381" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB380 ,Group Status Bit 380" "Group 0,Group 1" bitfld.long 0x00 27. " GSB379 ,Group Status Bit 379" "Group 0,Group 1" bitfld.long 0x00 26. " GSB378 ,Group Status Bit 378" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB377 ,Group Status Bit 377" "Group 0,Group 1" bitfld.long 0x00 24. " GSB376 ,Group Status Bit 376" "Group 0,Group 1" bitfld.long 0x00 23. " GSB375 ,Group Status Bit 375" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB374 ,Group Status Bit 374" "Group 0,Group 1" bitfld.long 0x00 21. " GSB373 ,Group Status Bit 373" "Group 0,Group 1" bitfld.long 0x00 20. " GSB372 ,Group Status Bit 372" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB371 ,Group Status Bit 371" "Group 0,Group 1" bitfld.long 0x00 18. " GSB370 ,Group Status Bit 370" "Group 0,Group 1" bitfld.long 0x00 17. " GSB369 ,Group Status Bit 369" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB368 ,Group Status Bit 368" "Group 0,Group 1" bitfld.long 0x00 15. " GSB367 ,Group Status Bit 367" "Group 0,Group 1" bitfld.long 0x00 14. " GSB366 ,Group Status Bit 366" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB365 ,Group Status Bit 365" "Group 0,Group 1" bitfld.long 0x00 12. " GSB364 ,Group Status Bit 364" "Group 0,Group 1" bitfld.long 0x00 11. " GSB363 ,Group Status Bit 363" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB362 ,Group Status Bit 362" "Group 0,Group 1" bitfld.long 0x00 9. " GSB361 ,Group Status Bit 361" "Group 0,Group 1" bitfld.long 0x00 8. " GSB360 ,Group Status Bit 360" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB359 ,Group Status Bit 359" "Group 0,Group 1" bitfld.long 0x00 6. " GSB358 ,Group Status Bit 358" "Group 0,Group 1" bitfld.long 0x00 5. " GSB357 ,Group Status Bit 357" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB356 ,Group Status Bit 356" "Group 0,Group 1" bitfld.long 0x00 3. " GSB355 ,Group Status Bit 355" "Group 0,Group 1" bitfld.long 0x00 2. " GSB354 ,Group Status Bit 354" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB353 ,Group Status Bit 353" "Group 0,Group 1" bitfld.long 0x00 0. " GSB352 ,Group Status Bit 352" "Group 0,Group 1" else hgroup.long 0x00AC++0x03 hide.long 0x0 "GICD_IGROUPR11,Interrupt Group Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0C)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00B0)) group.long 0x00B0++0x03 line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Secure access)" bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB414 ,Group Status Bit 414" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB413 ,Group Status Bit 413" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB411 ,Group Status Bit 411" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB410 ,Group Status Bit 410" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB408 ,Group Status Bit 408" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB407 ,Group Status Bit 407" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB405 ,Group Status Bit 405" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB404 ,Group Status Bit 404" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB402 ,Group Status Bit 402" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB401 ,Group Status Bit 401" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB399 ,Group Status Bit 399" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB398 ,Group Status Bit 398" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB396 ,Group Status Bit 396" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB395 ,Group Status Bit 395" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB393 ,Group Status Bit 393" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB392 ,Group Status Bit 392" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB390 ,Group Status Bit 390" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB389 ,Group Status Bit 389" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB387 ,Group Status Bit 387" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB386 ,Group Status Bit 386" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB384 ,Group Status Bit 384" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0C) group.long 0x00B0++0x03 line.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12 (Non-secure access)" bitfld.long 0x00 31. " GSB415 ,Group Status Bit 415" "Group 0,Group 1" bitfld.long 0x00 30. " GSB414 ,Group Status Bit 414" "Group 0,Group 1" bitfld.long 0x00 29. " GSB413 ,Group Status Bit 413" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB412 ,Group Status Bit 412" "Group 0,Group 1" bitfld.long 0x00 27. " GSB411 ,Group Status Bit 411" "Group 0,Group 1" bitfld.long 0x00 26. " GSB410 ,Group Status Bit 410" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB409 ,Group Status Bit 409" "Group 0,Group 1" bitfld.long 0x00 24. " GSB408 ,Group Status Bit 408" "Group 0,Group 1" bitfld.long 0x00 23. " GSB407 ,Group Status Bit 407" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB406 ,Group Status Bit 406" "Group 0,Group 1" bitfld.long 0x00 21. " GSB405 ,Group Status Bit 405" "Group 0,Group 1" bitfld.long 0x00 20. " GSB404 ,Group Status Bit 404" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB403 ,Group Status Bit 403" "Group 0,Group 1" bitfld.long 0x00 18. " GSB402 ,Group Status Bit 402" "Group 0,Group 1" bitfld.long 0x00 17. " GSB401 ,Group Status Bit 401" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB400 ,Group Status Bit 400" "Group 0,Group 1" bitfld.long 0x00 15. " GSB399 ,Group Status Bit 399" "Group 0,Group 1" bitfld.long 0x00 14. " GSB398 ,Group Status Bit 398" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB397 ,Group Status Bit 397" "Group 0,Group 1" bitfld.long 0x00 12. " GSB396 ,Group Status Bit 396" "Group 0,Group 1" bitfld.long 0x00 11. " GSB395 ,Group Status Bit 395" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB394 ,Group Status Bit 394" "Group 0,Group 1" bitfld.long 0x00 9. " GSB393 ,Group Status Bit 393" "Group 0,Group 1" bitfld.long 0x00 8. " GSB392 ,Group Status Bit 392" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB391 ,Group Status Bit 391" "Group 0,Group 1" bitfld.long 0x00 6. " GSB390 ,Group Status Bit 390" "Group 0,Group 1" bitfld.long 0x00 5. " GSB389 ,Group Status Bit 389" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB388 ,Group Status Bit 388" "Group 0,Group 1" bitfld.long 0x00 3. " GSB387 ,Group Status Bit 387" "Group 0,Group 1" bitfld.long 0x00 2. " GSB386 ,Group Status Bit 386" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB385 ,Group Status Bit 385" "Group 0,Group 1" bitfld.long 0x00 0. " GSB384 ,Group Status Bit 384" "Group 0,Group 1" else hgroup.long 0x00B0++0x03 hide.long 0x0 "GICD_IGROUPR12,Interrupt Group Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0D)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00B4)) group.long 0x00B4++0x03 line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Secure access)" bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB446 ,Group Status Bit 446" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB445 ,Group Status Bit 445" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB443 ,Group Status Bit 443" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB442 ,Group Status Bit 442" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB440 ,Group Status Bit 440" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB439 ,Group Status Bit 439" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB437 ,Group Status Bit 437" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB436 ,Group Status Bit 436" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB434 ,Group Status Bit 434" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB433 ,Group Status Bit 433" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB431 ,Group Status Bit 431" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB430 ,Group Status Bit 430" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB428 ,Group Status Bit 428" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB427 ,Group Status Bit 427" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB425 ,Group Status Bit 425" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB424 ,Group Status Bit 424" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB422 ,Group Status Bit 422" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB421 ,Group Status Bit 421" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB419 ,Group Status Bit 419" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB418 ,Group Status Bit 418" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB416 ,Group Status Bit 416" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0D) group.long 0x00B4++0x03 line.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13 (Non-secure access)" bitfld.long 0x00 31. " GSB447 ,Group Status Bit 447" "Group 0,Group 1" bitfld.long 0x00 30. " GSB446 ,Group Status Bit 446" "Group 0,Group 1" bitfld.long 0x00 29. " GSB445 ,Group Status Bit 445" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB444 ,Group Status Bit 444" "Group 0,Group 1" bitfld.long 0x00 27. " GSB443 ,Group Status Bit 443" "Group 0,Group 1" bitfld.long 0x00 26. " GSB442 ,Group Status Bit 442" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB441 ,Group Status Bit 441" "Group 0,Group 1" bitfld.long 0x00 24. " GSB440 ,Group Status Bit 440" "Group 0,Group 1" bitfld.long 0x00 23. " GSB439 ,Group Status Bit 439" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB438 ,Group Status Bit 438" "Group 0,Group 1" bitfld.long 0x00 21. " GSB437 ,Group Status Bit 437" "Group 0,Group 1" bitfld.long 0x00 20. " GSB436 ,Group Status Bit 436" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB435 ,Group Status Bit 435" "Group 0,Group 1" bitfld.long 0x00 18. " GSB434 ,Group Status Bit 434" "Group 0,Group 1" bitfld.long 0x00 17. " GSB433 ,Group Status Bit 433" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB432 ,Group Status Bit 432" "Group 0,Group 1" bitfld.long 0x00 15. " GSB431 ,Group Status Bit 431" "Group 0,Group 1" bitfld.long 0x00 14. " GSB430 ,Group Status Bit 430" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB429 ,Group Status Bit 429" "Group 0,Group 1" bitfld.long 0x00 12. " GSB428 ,Group Status Bit 428" "Group 0,Group 1" bitfld.long 0x00 11. " GSB427 ,Group Status Bit 427" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB426 ,Group Status Bit 426" "Group 0,Group 1" bitfld.long 0x00 9. " GSB425 ,Group Status Bit 425" "Group 0,Group 1" bitfld.long 0x00 8. " GSB424 ,Group Status Bit 424" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB423 ,Group Status Bit 423" "Group 0,Group 1" bitfld.long 0x00 6. " GSB422 ,Group Status Bit 422" "Group 0,Group 1" bitfld.long 0x00 5. " GSB421 ,Group Status Bit 421" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB420 ,Group Status Bit 420" "Group 0,Group 1" bitfld.long 0x00 3. " GSB419 ,Group Status Bit 419" "Group 0,Group 1" bitfld.long 0x00 2. " GSB418 ,Group Status Bit 418" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB417 ,Group Status Bit 417" "Group 0,Group 1" bitfld.long 0x00 0. " GSB416 ,Group Status Bit 416" "Group 0,Group 1" else hgroup.long 0x00B4++0x03 hide.long 0x0 "GICD_IGROUPR13,Interrupt Group Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0E)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00B8)) group.long 0x00B8++0x03 line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Secure access)" bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB478 ,Group Status Bit 478" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB477 ,Group Status Bit 477" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB475 ,Group Status Bit 475" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB474 ,Group Status Bit 474" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB472 ,Group Status Bit 472" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB471 ,Group Status Bit 471" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB469 ,Group Status Bit 469" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB468 ,Group Status Bit 468" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB466 ,Group Status Bit 466" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB465 ,Group Status Bit 465" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB463 ,Group Status Bit 463" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB462 ,Group Status Bit 462" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB460 ,Group Status Bit 460" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB459 ,Group Status Bit 459" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB457 ,Group Status Bit 457" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB456 ,Group Status Bit 456" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB454 ,Group Status Bit 454" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB453 ,Group Status Bit 453" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB451 ,Group Status Bit 451" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB450 ,Group Status Bit 450" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB448 ,Group Status Bit 448" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0E) group.long 0x00B8++0x03 line.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14 (Non-secure access)" bitfld.long 0x00 31. " GSB479 ,Group Status Bit 479" "Group 0,Group 1" bitfld.long 0x00 30. " GSB478 ,Group Status Bit 478" "Group 0,Group 1" bitfld.long 0x00 29. " GSB477 ,Group Status Bit 477" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB476 ,Group Status Bit 476" "Group 0,Group 1" bitfld.long 0x00 27. " GSB475 ,Group Status Bit 475" "Group 0,Group 1" bitfld.long 0x00 26. " GSB474 ,Group Status Bit 474" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB473 ,Group Status Bit 473" "Group 0,Group 1" bitfld.long 0x00 24. " GSB472 ,Group Status Bit 472" "Group 0,Group 1" bitfld.long 0x00 23. " GSB471 ,Group Status Bit 471" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB470 ,Group Status Bit 470" "Group 0,Group 1" bitfld.long 0x00 21. " GSB469 ,Group Status Bit 469" "Group 0,Group 1" bitfld.long 0x00 20. " GSB468 ,Group Status Bit 468" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB467 ,Group Status Bit 467" "Group 0,Group 1" bitfld.long 0x00 18. " GSB466 ,Group Status Bit 466" "Group 0,Group 1" bitfld.long 0x00 17. " GSB465 ,Group Status Bit 465" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB464 ,Group Status Bit 464" "Group 0,Group 1" bitfld.long 0x00 15. " GSB463 ,Group Status Bit 463" "Group 0,Group 1" bitfld.long 0x00 14. " GSB462 ,Group Status Bit 462" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB461 ,Group Status Bit 461" "Group 0,Group 1" bitfld.long 0x00 12. " GSB460 ,Group Status Bit 460" "Group 0,Group 1" bitfld.long 0x00 11. " GSB459 ,Group Status Bit 459" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB458 ,Group Status Bit 458" "Group 0,Group 1" bitfld.long 0x00 9. " GSB457 ,Group Status Bit 457" "Group 0,Group 1" bitfld.long 0x00 8. " GSB456 ,Group Status Bit 456" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB455 ,Group Status Bit 455" "Group 0,Group 1" bitfld.long 0x00 6. " GSB454 ,Group Status Bit 454" "Group 0,Group 1" bitfld.long 0x00 5. " GSB453 ,Group Status Bit 453" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB452 ,Group Status Bit 452" "Group 0,Group 1" bitfld.long 0x00 3. " GSB451 ,Group Status Bit 451" "Group 0,Group 1" bitfld.long 0x00 2. " GSB450 ,Group Status Bit 450" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB449 ,Group Status Bit 449" "Group 0,Group 1" bitfld.long 0x00 0. " GSB448 ,Group Status Bit 448" "Group 0,Group 1" else hgroup.long 0x00B8++0x03 hide.long 0x0 "GICD_IGROUPR14,Interrupt Group Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0F)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00BC)) group.long 0x00BC++0x03 line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Secure access)" bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB510 ,Group Status Bit 510" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB509 ,Group Status Bit 509" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB507 ,Group Status Bit 507" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB506 ,Group Status Bit 506" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB504 ,Group Status Bit 504" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB503 ,Group Status Bit 503" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB501 ,Group Status Bit 501" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB500 ,Group Status Bit 500" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB498 ,Group Status Bit 498" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB497 ,Group Status Bit 497" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB495 ,Group Status Bit 495" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB494 ,Group Status Bit 494" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB492 ,Group Status Bit 492" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB491 ,Group Status Bit 491" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB489 ,Group Status Bit 489" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB488 ,Group Status Bit 488" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB486 ,Group Status Bit 486" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB485 ,Group Status Bit 485" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB483 ,Group Status Bit 483" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB482 ,Group Status Bit 482" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB480 ,Group Status Bit 480" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0F) group.long 0x00BC++0x03 line.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15 (Non-secure access)" bitfld.long 0x00 31. " GSB511 ,Group Status Bit 511" "Group 0,Group 1" bitfld.long 0x00 30. " GSB510 ,Group Status Bit 510" "Group 0,Group 1" bitfld.long 0x00 29. " GSB509 ,Group Status Bit 509" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB508 ,Group Status Bit 508" "Group 0,Group 1" bitfld.long 0x00 27. " GSB507 ,Group Status Bit 507" "Group 0,Group 1" bitfld.long 0x00 26. " GSB506 ,Group Status Bit 506" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB505 ,Group Status Bit 505" "Group 0,Group 1" bitfld.long 0x00 24. " GSB504 ,Group Status Bit 504" "Group 0,Group 1" bitfld.long 0x00 23. " GSB503 ,Group Status Bit 503" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB502 ,Group Status Bit 502" "Group 0,Group 1" bitfld.long 0x00 21. " GSB501 ,Group Status Bit 501" "Group 0,Group 1" bitfld.long 0x00 20. " GSB500 ,Group Status Bit 500" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB499 ,Group Status Bit 499" "Group 0,Group 1" bitfld.long 0x00 18. " GSB498 ,Group Status Bit 498" "Group 0,Group 1" bitfld.long 0x00 17. " GSB497 ,Group Status Bit 497" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB496 ,Group Status Bit 496" "Group 0,Group 1" bitfld.long 0x00 15. " GSB495 ,Group Status Bit 495" "Group 0,Group 1" bitfld.long 0x00 14. " GSB494 ,Group Status Bit 494" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB493 ,Group Status Bit 493" "Group 0,Group 1" bitfld.long 0x00 12. " GSB492 ,Group Status Bit 492" "Group 0,Group 1" bitfld.long 0x00 11. " GSB491 ,Group Status Bit 491" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB490 ,Group Status Bit 490" "Group 0,Group 1" bitfld.long 0x00 9. " GSB489 ,Group Status Bit 489" "Group 0,Group 1" bitfld.long 0x00 8. " GSB488 ,Group Status Bit 488" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB487 ,Group Status Bit 487" "Group 0,Group 1" bitfld.long 0x00 6. " GSB486 ,Group Status Bit 486" "Group 0,Group 1" bitfld.long 0x00 5. " GSB485 ,Group Status Bit 485" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB484 ,Group Status Bit 484" "Group 0,Group 1" bitfld.long 0x00 3. " GSB483 ,Group Status Bit 483" "Group 0,Group 1" bitfld.long 0x00 2. " GSB482 ,Group Status Bit 482" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB481 ,Group Status Bit 481" "Group 0,Group 1" bitfld.long 0x00 0. " GSB480 ,Group Status Bit 480" "Group 0,Group 1" else hgroup.long 0x00BC++0x03 hide.long 0x0 "GICD_IGROUPR15,Interrupt Group Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00C0)) group.long 0x00C0++0x03 line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Secure access)" bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB542 ,Group Status Bit 542" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB541 ,Group Status Bit 541" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB539 ,Group Status Bit 539" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB538 ,Group Status Bit 538" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB536 ,Group Status Bit 536" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB535 ,Group Status Bit 535" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB533 ,Group Status Bit 533" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB532 ,Group Status Bit 532" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB530 ,Group Status Bit 530" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB529 ,Group Status Bit 529" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB527 ,Group Status Bit 527" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB526 ,Group Status Bit 526" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB524 ,Group Status Bit 524" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB523 ,Group Status Bit 523" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB521 ,Group Status Bit 521" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB520 ,Group Status Bit 520" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB518 ,Group Status Bit 518" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB517 ,Group Status Bit 517" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB515 ,Group Status Bit 515" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB514 ,Group Status Bit 514" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB512 ,Group Status Bit 512" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10) group.long 0x00C0++0x03 line.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16 (Non-secure access)" bitfld.long 0x00 31. " GSB543 ,Group Status Bit 543" "Group 0,Group 1" bitfld.long 0x00 30. " GSB542 ,Group Status Bit 542" "Group 0,Group 1" bitfld.long 0x00 29. " GSB541 ,Group Status Bit 541" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB540 ,Group Status Bit 540" "Group 0,Group 1" bitfld.long 0x00 27. " GSB539 ,Group Status Bit 539" "Group 0,Group 1" bitfld.long 0x00 26. " GSB538 ,Group Status Bit 538" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB537 ,Group Status Bit 537" "Group 0,Group 1" bitfld.long 0x00 24. " GSB536 ,Group Status Bit 536" "Group 0,Group 1" bitfld.long 0x00 23. " GSB535 ,Group Status Bit 535" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB534 ,Group Status Bit 534" "Group 0,Group 1" bitfld.long 0x00 21. " GSB533 ,Group Status Bit 533" "Group 0,Group 1" bitfld.long 0x00 20. " GSB532 ,Group Status Bit 532" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB531 ,Group Status Bit 531" "Group 0,Group 1" bitfld.long 0x00 18. " GSB530 ,Group Status Bit 530" "Group 0,Group 1" bitfld.long 0x00 17. " GSB529 ,Group Status Bit 529" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB528 ,Group Status Bit 528" "Group 0,Group 1" bitfld.long 0x00 15. " GSB527 ,Group Status Bit 527" "Group 0,Group 1" bitfld.long 0x00 14. " GSB526 ,Group Status Bit 526" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB525 ,Group Status Bit 525" "Group 0,Group 1" bitfld.long 0x00 12. " GSB524 ,Group Status Bit 524" "Group 0,Group 1" bitfld.long 0x00 11. " GSB523 ,Group Status Bit 523" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB522 ,Group Status Bit 522" "Group 0,Group 1" bitfld.long 0x00 9. " GSB521 ,Group Status Bit 521" "Group 0,Group 1" bitfld.long 0x00 8. " GSB520 ,Group Status Bit 520" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB519 ,Group Status Bit 519" "Group 0,Group 1" bitfld.long 0x00 6. " GSB518 ,Group Status Bit 518" "Group 0,Group 1" bitfld.long 0x00 5. " GSB517 ,Group Status Bit 517" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB516 ,Group Status Bit 516" "Group 0,Group 1" bitfld.long 0x00 3. " GSB515 ,Group Status Bit 515" "Group 0,Group 1" bitfld.long 0x00 2. " GSB514 ,Group Status Bit 514" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB513 ,Group Status Bit 513" "Group 0,Group 1" bitfld.long 0x00 0. " GSB512 ,Group Status Bit 512" "Group 0,Group 1" else hgroup.long 0x00C0++0x03 hide.long 0x0 "GICD_IGROUPR16,Interrupt Group Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00C4)) group.long 0x00C4++0x03 line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Secure access)" bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB574 ,Group Status Bit 574" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB573 ,Group Status Bit 573" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB571 ,Group Status Bit 571" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB570 ,Group Status Bit 570" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB568 ,Group Status Bit 568" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB567 ,Group Status Bit 567" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB565 ,Group Status Bit 565" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB564 ,Group Status Bit 564" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB562 ,Group Status Bit 562" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB561 ,Group Status Bit 561" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB559 ,Group Status Bit 559" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB558 ,Group Status Bit 558" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB556 ,Group Status Bit 556" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB555 ,Group Status Bit 555" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB553 ,Group Status Bit 553" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB552 ,Group Status Bit 552" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB550 ,Group Status Bit 550" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB549 ,Group Status Bit 549" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB547 ,Group Status Bit 547" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB546 ,Group Status Bit 546" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB544 ,Group Status Bit 544" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11) group.long 0x00C4++0x03 line.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17 (Non-secure access)" bitfld.long 0x00 31. " GSB575 ,Group Status Bit 575" "Group 0,Group 1" bitfld.long 0x00 30. " GSB574 ,Group Status Bit 574" "Group 0,Group 1" bitfld.long 0x00 29. " GSB573 ,Group Status Bit 573" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB572 ,Group Status Bit 572" "Group 0,Group 1" bitfld.long 0x00 27. " GSB571 ,Group Status Bit 571" "Group 0,Group 1" bitfld.long 0x00 26. " GSB570 ,Group Status Bit 570" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB569 ,Group Status Bit 569" "Group 0,Group 1" bitfld.long 0x00 24. " GSB568 ,Group Status Bit 568" "Group 0,Group 1" bitfld.long 0x00 23. " GSB567 ,Group Status Bit 567" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB566 ,Group Status Bit 566" "Group 0,Group 1" bitfld.long 0x00 21. " GSB565 ,Group Status Bit 565" "Group 0,Group 1" bitfld.long 0x00 20. " GSB564 ,Group Status Bit 564" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB563 ,Group Status Bit 563" "Group 0,Group 1" bitfld.long 0x00 18. " GSB562 ,Group Status Bit 562" "Group 0,Group 1" bitfld.long 0x00 17. " GSB561 ,Group Status Bit 561" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB560 ,Group Status Bit 560" "Group 0,Group 1" bitfld.long 0x00 15. " GSB559 ,Group Status Bit 559" "Group 0,Group 1" bitfld.long 0x00 14. " GSB558 ,Group Status Bit 558" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB557 ,Group Status Bit 557" "Group 0,Group 1" bitfld.long 0x00 12. " GSB556 ,Group Status Bit 556" "Group 0,Group 1" bitfld.long 0x00 11. " GSB555 ,Group Status Bit 555" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB554 ,Group Status Bit 554" "Group 0,Group 1" bitfld.long 0x00 9. " GSB553 ,Group Status Bit 553" "Group 0,Group 1" bitfld.long 0x00 8. " GSB552 ,Group Status Bit 552" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB551 ,Group Status Bit 551" "Group 0,Group 1" bitfld.long 0x00 6. " GSB550 ,Group Status Bit 550" "Group 0,Group 1" bitfld.long 0x00 5. " GSB549 ,Group Status Bit 549" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB548 ,Group Status Bit 548" "Group 0,Group 1" bitfld.long 0x00 3. " GSB547 ,Group Status Bit 547" "Group 0,Group 1" bitfld.long 0x00 2. " GSB546 ,Group Status Bit 546" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB545 ,Group Status Bit 545" "Group 0,Group 1" bitfld.long 0x00 0. " GSB544 ,Group Status Bit 544" "Group 0,Group 1" else hgroup.long 0x00C4++0x03 hide.long 0x0 "GICD_IGROUPR17,Interrupt Group Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00C8)) group.long 0x00C8++0x03 line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Secure access)" bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB606 ,Group Status Bit 606" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB605 ,Group Status Bit 605" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB603 ,Group Status Bit 603" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB602 ,Group Status Bit 602" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB600 ,Group Status Bit 600" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB599 ,Group Status Bit 599" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB597 ,Group Status Bit 597" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB596 ,Group Status Bit 596" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB594 ,Group Status Bit 594" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB593 ,Group Status Bit 593" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB591 ,Group Status Bit 591" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB590 ,Group Status Bit 590" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB588 ,Group Status Bit 588" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB587 ,Group Status Bit 587" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB585 ,Group Status Bit 585" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB584 ,Group Status Bit 584" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB582 ,Group Status Bit 582" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB581 ,Group Status Bit 581" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB579 ,Group Status Bit 579" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB578 ,Group Status Bit 578" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB576 ,Group Status Bit 576" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12) group.long 0x00C8++0x03 line.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18 (Non-secure access)" bitfld.long 0x00 31. " GSB607 ,Group Status Bit 607" "Group 0,Group 1" bitfld.long 0x00 30. " GSB606 ,Group Status Bit 606" "Group 0,Group 1" bitfld.long 0x00 29. " GSB605 ,Group Status Bit 605" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB604 ,Group Status Bit 604" "Group 0,Group 1" bitfld.long 0x00 27. " GSB603 ,Group Status Bit 603" "Group 0,Group 1" bitfld.long 0x00 26. " GSB602 ,Group Status Bit 602" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB601 ,Group Status Bit 601" "Group 0,Group 1" bitfld.long 0x00 24. " GSB600 ,Group Status Bit 600" "Group 0,Group 1" bitfld.long 0x00 23. " GSB599 ,Group Status Bit 599" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB598 ,Group Status Bit 598" "Group 0,Group 1" bitfld.long 0x00 21. " GSB597 ,Group Status Bit 597" "Group 0,Group 1" bitfld.long 0x00 20. " GSB596 ,Group Status Bit 596" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB595 ,Group Status Bit 595" "Group 0,Group 1" bitfld.long 0x00 18. " GSB594 ,Group Status Bit 594" "Group 0,Group 1" bitfld.long 0x00 17. " GSB593 ,Group Status Bit 593" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB592 ,Group Status Bit 592" "Group 0,Group 1" bitfld.long 0x00 15. " GSB591 ,Group Status Bit 591" "Group 0,Group 1" bitfld.long 0x00 14. " GSB590 ,Group Status Bit 590" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB589 ,Group Status Bit 589" "Group 0,Group 1" bitfld.long 0x00 12. " GSB588 ,Group Status Bit 588" "Group 0,Group 1" bitfld.long 0x00 11. " GSB587 ,Group Status Bit 587" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB586 ,Group Status Bit 586" "Group 0,Group 1" bitfld.long 0x00 9. " GSB585 ,Group Status Bit 585" "Group 0,Group 1" bitfld.long 0x00 8. " GSB584 ,Group Status Bit 584" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB583 ,Group Status Bit 583" "Group 0,Group 1" bitfld.long 0x00 6. " GSB582 ,Group Status Bit 582" "Group 0,Group 1" bitfld.long 0x00 5. " GSB581 ,Group Status Bit 581" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB580 ,Group Status Bit 580" "Group 0,Group 1" bitfld.long 0x00 3. " GSB579 ,Group Status Bit 579" "Group 0,Group 1" bitfld.long 0x00 2. " GSB578 ,Group Status Bit 578" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB577 ,Group Status Bit 577" "Group 0,Group 1" bitfld.long 0x00 0. " GSB576 ,Group Status Bit 576" "Group 0,Group 1" else hgroup.long 0x00C8++0x03 hide.long 0x0 "GICD_IGROUPR18,Interrupt Group Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00CC)) group.long 0x00CC++0x03 line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Secure access)" bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB638 ,Group Status Bit 638" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB637 ,Group Status Bit 637" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB635 ,Group Status Bit 635" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB634 ,Group Status Bit 634" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB632 ,Group Status Bit 632" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB631 ,Group Status Bit 631" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB629 ,Group Status Bit 629" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB628 ,Group Status Bit 628" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB626 ,Group Status Bit 626" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB625 ,Group Status Bit 625" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB623 ,Group Status Bit 623" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB622 ,Group Status Bit 622" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB620 ,Group Status Bit 620" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB619 ,Group Status Bit 619" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB617 ,Group Status Bit 617" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB616 ,Group Status Bit 616" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB614 ,Group Status Bit 614" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB613 ,Group Status Bit 613" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB611 ,Group Status Bit 611" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB610 ,Group Status Bit 610" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB608 ,Group Status Bit 608" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13) group.long 0x00CC++0x03 line.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19 (Non-secure access)" bitfld.long 0x00 31. " GSB639 ,Group Status Bit 639" "Group 0,Group 1" bitfld.long 0x00 30. " GSB638 ,Group Status Bit 638" "Group 0,Group 1" bitfld.long 0x00 29. " GSB637 ,Group Status Bit 637" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB636 ,Group Status Bit 636" "Group 0,Group 1" bitfld.long 0x00 27. " GSB635 ,Group Status Bit 635" "Group 0,Group 1" bitfld.long 0x00 26. " GSB634 ,Group Status Bit 634" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB633 ,Group Status Bit 633" "Group 0,Group 1" bitfld.long 0x00 24. " GSB632 ,Group Status Bit 632" "Group 0,Group 1" bitfld.long 0x00 23. " GSB631 ,Group Status Bit 631" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB630 ,Group Status Bit 630" "Group 0,Group 1" bitfld.long 0x00 21. " GSB629 ,Group Status Bit 629" "Group 0,Group 1" bitfld.long 0x00 20. " GSB628 ,Group Status Bit 628" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB627 ,Group Status Bit 627" "Group 0,Group 1" bitfld.long 0x00 18. " GSB626 ,Group Status Bit 626" "Group 0,Group 1" bitfld.long 0x00 17. " GSB625 ,Group Status Bit 625" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB624 ,Group Status Bit 624" "Group 0,Group 1" bitfld.long 0x00 15. " GSB623 ,Group Status Bit 623" "Group 0,Group 1" bitfld.long 0x00 14. " GSB622 ,Group Status Bit 622" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB621 ,Group Status Bit 621" "Group 0,Group 1" bitfld.long 0x00 12. " GSB620 ,Group Status Bit 620" "Group 0,Group 1" bitfld.long 0x00 11. " GSB619 ,Group Status Bit 619" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB618 ,Group Status Bit 618" "Group 0,Group 1" bitfld.long 0x00 9. " GSB617 ,Group Status Bit 617" "Group 0,Group 1" bitfld.long 0x00 8. " GSB616 ,Group Status Bit 616" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB615 ,Group Status Bit 615" "Group 0,Group 1" bitfld.long 0x00 6. " GSB614 ,Group Status Bit 614" "Group 0,Group 1" bitfld.long 0x00 5. " GSB613 ,Group Status Bit 613" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB612 ,Group Status Bit 612" "Group 0,Group 1" bitfld.long 0x00 3. " GSB611 ,Group Status Bit 611" "Group 0,Group 1" bitfld.long 0x00 2. " GSB610 ,Group Status Bit 610" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB609 ,Group Status Bit 609" "Group 0,Group 1" bitfld.long 0x00 0. " GSB608 ,Group Status Bit 608" "Group 0,Group 1" else hgroup.long 0x00CC++0x03 hide.long 0x0 "GICD_IGROUPR19,Interrupt Group Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00D0)) group.long 0x00D0++0x03 line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Secure access)" bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB670 ,Group Status Bit 670" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB669 ,Group Status Bit 669" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB667 ,Group Status Bit 667" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB666 ,Group Status Bit 666" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB664 ,Group Status Bit 664" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB663 ,Group Status Bit 663" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB661 ,Group Status Bit 661" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB660 ,Group Status Bit 660" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB658 ,Group Status Bit 658" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB657 ,Group Status Bit 657" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB655 ,Group Status Bit 655" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB654 ,Group Status Bit 654" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB652 ,Group Status Bit 652" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB651 ,Group Status Bit 651" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB649 ,Group Status Bit 649" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB648 ,Group Status Bit 648" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB646 ,Group Status Bit 646" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB645 ,Group Status Bit 645" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB643 ,Group Status Bit 643" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB642 ,Group Status Bit 642" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB640 ,Group Status Bit 640" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14) group.long 0x00D0++0x03 line.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20 (Non-secure access)" bitfld.long 0x00 31. " GSB671 ,Group Status Bit 671" "Group 0,Group 1" bitfld.long 0x00 30. " GSB670 ,Group Status Bit 670" "Group 0,Group 1" bitfld.long 0x00 29. " GSB669 ,Group Status Bit 669" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB668 ,Group Status Bit 668" "Group 0,Group 1" bitfld.long 0x00 27. " GSB667 ,Group Status Bit 667" "Group 0,Group 1" bitfld.long 0x00 26. " GSB666 ,Group Status Bit 666" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB665 ,Group Status Bit 665" "Group 0,Group 1" bitfld.long 0x00 24. " GSB664 ,Group Status Bit 664" "Group 0,Group 1" bitfld.long 0x00 23. " GSB663 ,Group Status Bit 663" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB662 ,Group Status Bit 662" "Group 0,Group 1" bitfld.long 0x00 21. " GSB661 ,Group Status Bit 661" "Group 0,Group 1" bitfld.long 0x00 20. " GSB660 ,Group Status Bit 660" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB659 ,Group Status Bit 659" "Group 0,Group 1" bitfld.long 0x00 18. " GSB658 ,Group Status Bit 658" "Group 0,Group 1" bitfld.long 0x00 17. " GSB657 ,Group Status Bit 657" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB656 ,Group Status Bit 656" "Group 0,Group 1" bitfld.long 0x00 15. " GSB655 ,Group Status Bit 655" "Group 0,Group 1" bitfld.long 0x00 14. " GSB654 ,Group Status Bit 654" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB653 ,Group Status Bit 653" "Group 0,Group 1" bitfld.long 0x00 12. " GSB652 ,Group Status Bit 652" "Group 0,Group 1" bitfld.long 0x00 11. " GSB651 ,Group Status Bit 651" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB650 ,Group Status Bit 650" "Group 0,Group 1" bitfld.long 0x00 9. " GSB649 ,Group Status Bit 649" "Group 0,Group 1" bitfld.long 0x00 8. " GSB648 ,Group Status Bit 648" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB647 ,Group Status Bit 647" "Group 0,Group 1" bitfld.long 0x00 6. " GSB646 ,Group Status Bit 646" "Group 0,Group 1" bitfld.long 0x00 5. " GSB645 ,Group Status Bit 645" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB644 ,Group Status Bit 644" "Group 0,Group 1" bitfld.long 0x00 3. " GSB643 ,Group Status Bit 643" "Group 0,Group 1" bitfld.long 0x00 2. " GSB642 ,Group Status Bit 642" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB641 ,Group Status Bit 641" "Group 0,Group 1" bitfld.long 0x00 0. " GSB640 ,Group Status Bit 640" "Group 0,Group 1" else hgroup.long 0x00D0++0x03 hide.long 0x0 "GICD_IGROUPR20,Interrupt Group Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00D4)) group.long 0x00D4++0x03 line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Secure access)" bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB702 ,Group Status Bit 702" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB701 ,Group Status Bit 701" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB699 ,Group Status Bit 699" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB698 ,Group Status Bit 698" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB696 ,Group Status Bit 696" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB695 ,Group Status Bit 695" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB693 ,Group Status Bit 693" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB692 ,Group Status Bit 692" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB690 ,Group Status Bit 690" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB689 ,Group Status Bit 689" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB687 ,Group Status Bit 687" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB686 ,Group Status Bit 686" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB684 ,Group Status Bit 684" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB683 ,Group Status Bit 683" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB681 ,Group Status Bit 681" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB680 ,Group Status Bit 680" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB678 ,Group Status Bit 678" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB677 ,Group Status Bit 677" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB675 ,Group Status Bit 675" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB674 ,Group Status Bit 674" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB672 ,Group Status Bit 672" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15) group.long 0x00D4++0x03 line.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21 (Non-secure access)" bitfld.long 0x00 31. " GSB703 ,Group Status Bit 703" "Group 0,Group 1" bitfld.long 0x00 30. " GSB702 ,Group Status Bit 702" "Group 0,Group 1" bitfld.long 0x00 29. " GSB701 ,Group Status Bit 701" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB700 ,Group Status Bit 700" "Group 0,Group 1" bitfld.long 0x00 27. " GSB699 ,Group Status Bit 699" "Group 0,Group 1" bitfld.long 0x00 26. " GSB698 ,Group Status Bit 698" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB697 ,Group Status Bit 697" "Group 0,Group 1" bitfld.long 0x00 24. " GSB696 ,Group Status Bit 696" "Group 0,Group 1" bitfld.long 0x00 23. " GSB695 ,Group Status Bit 695" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB694 ,Group Status Bit 694" "Group 0,Group 1" bitfld.long 0x00 21. " GSB693 ,Group Status Bit 693" "Group 0,Group 1" bitfld.long 0x00 20. " GSB692 ,Group Status Bit 692" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB691 ,Group Status Bit 691" "Group 0,Group 1" bitfld.long 0x00 18. " GSB690 ,Group Status Bit 690" "Group 0,Group 1" bitfld.long 0x00 17. " GSB689 ,Group Status Bit 689" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB688 ,Group Status Bit 688" "Group 0,Group 1" bitfld.long 0x00 15. " GSB687 ,Group Status Bit 687" "Group 0,Group 1" bitfld.long 0x00 14. " GSB686 ,Group Status Bit 686" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB685 ,Group Status Bit 685" "Group 0,Group 1" bitfld.long 0x00 12. " GSB684 ,Group Status Bit 684" "Group 0,Group 1" bitfld.long 0x00 11. " GSB683 ,Group Status Bit 683" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB682 ,Group Status Bit 682" "Group 0,Group 1" bitfld.long 0x00 9. " GSB681 ,Group Status Bit 681" "Group 0,Group 1" bitfld.long 0x00 8. " GSB680 ,Group Status Bit 680" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB679 ,Group Status Bit 679" "Group 0,Group 1" bitfld.long 0x00 6. " GSB678 ,Group Status Bit 678" "Group 0,Group 1" bitfld.long 0x00 5. " GSB677 ,Group Status Bit 677" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB676 ,Group Status Bit 676" "Group 0,Group 1" bitfld.long 0x00 3. " GSB675 ,Group Status Bit 675" "Group 0,Group 1" bitfld.long 0x00 2. " GSB674 ,Group Status Bit 674" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB673 ,Group Status Bit 673" "Group 0,Group 1" bitfld.long 0x00 0. " GSB672 ,Group Status Bit 672" "Group 0,Group 1" else hgroup.long 0x00D4++0x03 hide.long 0x0 "GICD_IGROUPR21,Interrupt Group Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00D8)) group.long 0x00D8++0x03 line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Secure access)" bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB734 ,Group Status Bit 734" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB733 ,Group Status Bit 733" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB731 ,Group Status Bit 731" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB730 ,Group Status Bit 730" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB728 ,Group Status Bit 728" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB727 ,Group Status Bit 727" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB725 ,Group Status Bit 725" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB724 ,Group Status Bit 724" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB722 ,Group Status Bit 722" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB721 ,Group Status Bit 721" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB719 ,Group Status Bit 719" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB718 ,Group Status Bit 718" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB716 ,Group Status Bit 716" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB715 ,Group Status Bit 715" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB713 ,Group Status Bit 713" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB712 ,Group Status Bit 712" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB710 ,Group Status Bit 710" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB709 ,Group Status Bit 709" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB707 ,Group Status Bit 707" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB706 ,Group Status Bit 706" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB704 ,Group Status Bit 704" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16) group.long 0x00D8++0x03 line.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22 (Non-secure access)" bitfld.long 0x00 31. " GSB735 ,Group Status Bit 735" "Group 0,Group 1" bitfld.long 0x00 30. " GSB734 ,Group Status Bit 734" "Group 0,Group 1" bitfld.long 0x00 29. " GSB733 ,Group Status Bit 733" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB732 ,Group Status Bit 732" "Group 0,Group 1" bitfld.long 0x00 27. " GSB731 ,Group Status Bit 731" "Group 0,Group 1" bitfld.long 0x00 26. " GSB730 ,Group Status Bit 730" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB729 ,Group Status Bit 729" "Group 0,Group 1" bitfld.long 0x00 24. " GSB728 ,Group Status Bit 728" "Group 0,Group 1" bitfld.long 0x00 23. " GSB727 ,Group Status Bit 727" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB726 ,Group Status Bit 726" "Group 0,Group 1" bitfld.long 0x00 21. " GSB725 ,Group Status Bit 725" "Group 0,Group 1" bitfld.long 0x00 20. " GSB724 ,Group Status Bit 724" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB723 ,Group Status Bit 723" "Group 0,Group 1" bitfld.long 0x00 18. " GSB722 ,Group Status Bit 722" "Group 0,Group 1" bitfld.long 0x00 17. " GSB721 ,Group Status Bit 721" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB720 ,Group Status Bit 720" "Group 0,Group 1" bitfld.long 0x00 15. " GSB719 ,Group Status Bit 719" "Group 0,Group 1" bitfld.long 0x00 14. " GSB718 ,Group Status Bit 718" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB717 ,Group Status Bit 717" "Group 0,Group 1" bitfld.long 0x00 12. " GSB716 ,Group Status Bit 716" "Group 0,Group 1" bitfld.long 0x00 11. " GSB715 ,Group Status Bit 715" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB714 ,Group Status Bit 714" "Group 0,Group 1" bitfld.long 0x00 9. " GSB713 ,Group Status Bit 713" "Group 0,Group 1" bitfld.long 0x00 8. " GSB712 ,Group Status Bit 712" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB711 ,Group Status Bit 711" "Group 0,Group 1" bitfld.long 0x00 6. " GSB710 ,Group Status Bit 710" "Group 0,Group 1" bitfld.long 0x00 5. " GSB709 ,Group Status Bit 709" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB708 ,Group Status Bit 708" "Group 0,Group 1" bitfld.long 0x00 3. " GSB707 ,Group Status Bit 707" "Group 0,Group 1" bitfld.long 0x00 2. " GSB706 ,Group Status Bit 706" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB705 ,Group Status Bit 705" "Group 0,Group 1" bitfld.long 0x00 0. " GSB704 ,Group Status Bit 704" "Group 0,Group 1" else hgroup.long 0x00D8++0x03 hide.long 0x0 "GICD_IGROUPR22,Interrupt Group Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00DC)) group.long 0x00DC++0x03 line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Secure access)" bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB766 ,Group Status Bit 766" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB765 ,Group Status Bit 765" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB763 ,Group Status Bit 763" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB762 ,Group Status Bit 762" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB760 ,Group Status Bit 760" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB759 ,Group Status Bit 759" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB757 ,Group Status Bit 757" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB756 ,Group Status Bit 756" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB754 ,Group Status Bit 754" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB753 ,Group Status Bit 753" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB751 ,Group Status Bit 751" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB750 ,Group Status Bit 750" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB748 ,Group Status Bit 748" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB747 ,Group Status Bit 747" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB745 ,Group Status Bit 745" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB744 ,Group Status Bit 744" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB742 ,Group Status Bit 742" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB741 ,Group Status Bit 741" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB739 ,Group Status Bit 739" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB738 ,Group Status Bit 738" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB736 ,Group Status Bit 736" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17) group.long 0x00DC++0x03 line.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23 (Non-secure access)" bitfld.long 0x00 31. " GSB767 ,Group Status Bit 767" "Group 0,Group 1" bitfld.long 0x00 30. " GSB766 ,Group Status Bit 766" "Group 0,Group 1" bitfld.long 0x00 29. " GSB765 ,Group Status Bit 765" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB764 ,Group Status Bit 764" "Group 0,Group 1" bitfld.long 0x00 27. " GSB763 ,Group Status Bit 763" "Group 0,Group 1" bitfld.long 0x00 26. " GSB762 ,Group Status Bit 762" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB761 ,Group Status Bit 761" "Group 0,Group 1" bitfld.long 0x00 24. " GSB760 ,Group Status Bit 760" "Group 0,Group 1" bitfld.long 0x00 23. " GSB759 ,Group Status Bit 759" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB758 ,Group Status Bit 758" "Group 0,Group 1" bitfld.long 0x00 21. " GSB757 ,Group Status Bit 757" "Group 0,Group 1" bitfld.long 0x00 20. " GSB756 ,Group Status Bit 756" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB755 ,Group Status Bit 755" "Group 0,Group 1" bitfld.long 0x00 18. " GSB754 ,Group Status Bit 754" "Group 0,Group 1" bitfld.long 0x00 17. " GSB753 ,Group Status Bit 753" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB752 ,Group Status Bit 752" "Group 0,Group 1" bitfld.long 0x00 15. " GSB751 ,Group Status Bit 751" "Group 0,Group 1" bitfld.long 0x00 14. " GSB750 ,Group Status Bit 750" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB749 ,Group Status Bit 749" "Group 0,Group 1" bitfld.long 0x00 12. " GSB748 ,Group Status Bit 748" "Group 0,Group 1" bitfld.long 0x00 11. " GSB747 ,Group Status Bit 747" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB746 ,Group Status Bit 746" "Group 0,Group 1" bitfld.long 0x00 9. " GSB745 ,Group Status Bit 745" "Group 0,Group 1" bitfld.long 0x00 8. " GSB744 ,Group Status Bit 744" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB743 ,Group Status Bit 743" "Group 0,Group 1" bitfld.long 0x00 6. " GSB742 ,Group Status Bit 742" "Group 0,Group 1" bitfld.long 0x00 5. " GSB741 ,Group Status Bit 741" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB740 ,Group Status Bit 740" "Group 0,Group 1" bitfld.long 0x00 3. " GSB739 ,Group Status Bit 739" "Group 0,Group 1" bitfld.long 0x00 2. " GSB738 ,Group Status Bit 738" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB737 ,Group Status Bit 737" "Group 0,Group 1" bitfld.long 0x00 0. " GSB736 ,Group Status Bit 736" "Group 0,Group 1" else hgroup.long 0x00DC++0x03 hide.long 0x0 "GICD_IGROUPR23,Interrupt Group Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00E0)) group.long 0x00E0++0x03 line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Secure access)" bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB798 ,Group Status Bit 798" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB797 ,Group Status Bit 797" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB795 ,Group Status Bit 795" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB794 ,Group Status Bit 794" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB792 ,Group Status Bit 792" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB791 ,Group Status Bit 791" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB789 ,Group Status Bit 789" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB788 ,Group Status Bit 788" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB786 ,Group Status Bit 786" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB785 ,Group Status Bit 785" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB783 ,Group Status Bit 783" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB782 ,Group Status Bit 782" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB780 ,Group Status Bit 780" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB779 ,Group Status Bit 779" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB777 ,Group Status Bit 777" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB776 ,Group Status Bit 776" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB774 ,Group Status Bit 774" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB773 ,Group Status Bit 773" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB771 ,Group Status Bit 771" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB770 ,Group Status Bit 770" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB768 ,Group Status Bit 768" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18) group.long 0x00E0++0x03 line.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24 (Non-secure access)" bitfld.long 0x00 31. " GSB799 ,Group Status Bit 799" "Group 0,Group 1" bitfld.long 0x00 30. " GSB798 ,Group Status Bit 798" "Group 0,Group 1" bitfld.long 0x00 29. " GSB797 ,Group Status Bit 797" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB796 ,Group Status Bit 796" "Group 0,Group 1" bitfld.long 0x00 27. " GSB795 ,Group Status Bit 795" "Group 0,Group 1" bitfld.long 0x00 26. " GSB794 ,Group Status Bit 794" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB793 ,Group Status Bit 793" "Group 0,Group 1" bitfld.long 0x00 24. " GSB792 ,Group Status Bit 792" "Group 0,Group 1" bitfld.long 0x00 23. " GSB791 ,Group Status Bit 791" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB790 ,Group Status Bit 790" "Group 0,Group 1" bitfld.long 0x00 21. " GSB789 ,Group Status Bit 789" "Group 0,Group 1" bitfld.long 0x00 20. " GSB788 ,Group Status Bit 788" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB787 ,Group Status Bit 787" "Group 0,Group 1" bitfld.long 0x00 18. " GSB786 ,Group Status Bit 786" "Group 0,Group 1" bitfld.long 0x00 17. " GSB785 ,Group Status Bit 785" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB784 ,Group Status Bit 784" "Group 0,Group 1" bitfld.long 0x00 15. " GSB783 ,Group Status Bit 783" "Group 0,Group 1" bitfld.long 0x00 14. " GSB782 ,Group Status Bit 782" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB781 ,Group Status Bit 781" "Group 0,Group 1" bitfld.long 0x00 12. " GSB780 ,Group Status Bit 780" "Group 0,Group 1" bitfld.long 0x00 11. " GSB779 ,Group Status Bit 779" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB778 ,Group Status Bit 778" "Group 0,Group 1" bitfld.long 0x00 9. " GSB777 ,Group Status Bit 777" "Group 0,Group 1" bitfld.long 0x00 8. " GSB776 ,Group Status Bit 776" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB775 ,Group Status Bit 775" "Group 0,Group 1" bitfld.long 0x00 6. " GSB774 ,Group Status Bit 774" "Group 0,Group 1" bitfld.long 0x00 5. " GSB773 ,Group Status Bit 773" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB772 ,Group Status Bit 772" "Group 0,Group 1" bitfld.long 0x00 3. " GSB771 ,Group Status Bit 771" "Group 0,Group 1" bitfld.long 0x00 2. " GSB770 ,Group Status Bit 770" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB769 ,Group Status Bit 769" "Group 0,Group 1" bitfld.long 0x00 0. " GSB768 ,Group Status Bit 768" "Group 0,Group 1" else hgroup.long 0x0E0++0x03 hide.long 0x0 "GICD_IGROUPR24,Interrupt Group Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00E4)) group.long 0x00E4++0x03 line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Secure access)" bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB830 ,Group Status Bit 830" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB829 ,Group Status Bit 829" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB827 ,Group Status Bit 827" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB826 ,Group Status Bit 826" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB824 ,Group Status Bit 824" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB823 ,Group Status Bit 823" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB821 ,Group Status Bit 821" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB820 ,Group Status Bit 820" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB818 ,Group Status Bit 818" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB817 ,Group Status Bit 817" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB815 ,Group Status Bit 815" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB814 ,Group Status Bit 814" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB812 ,Group Status Bit 812" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB811 ,Group Status Bit 811" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB809 ,Group Status Bit 809" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB808 ,Group Status Bit 808" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB806 ,Group Status Bit 806" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB805 ,Group Status Bit 805" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB803 ,Group Status Bit 803" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB802 ,Group Status Bit 802" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB800 ,Group Status Bit 800" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19) group.long 0x00E4++0x03 line.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25 (Non-secure access)" bitfld.long 0x00 31. " GSB831 ,Group Status Bit 831" "Group 0,Group 1" bitfld.long 0x00 30. " GSB830 ,Group Status Bit 830" "Group 0,Group 1" bitfld.long 0x00 29. " GSB829 ,Group Status Bit 829" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB828 ,Group Status Bit 828" "Group 0,Group 1" bitfld.long 0x00 27. " GSB827 ,Group Status Bit 827" "Group 0,Group 1" bitfld.long 0x00 26. " GSB826 ,Group Status Bit 826" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB825 ,Group Status Bit 825" "Group 0,Group 1" bitfld.long 0x00 24. " GSB824 ,Group Status Bit 824" "Group 0,Group 1" bitfld.long 0x00 23. " GSB823 ,Group Status Bit 823" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB822 ,Group Status Bit 822" "Group 0,Group 1" bitfld.long 0x00 21. " GSB821 ,Group Status Bit 821" "Group 0,Group 1" bitfld.long 0x00 20. " GSB820 ,Group Status Bit 820" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB819 ,Group Status Bit 819" "Group 0,Group 1" bitfld.long 0x00 18. " GSB818 ,Group Status Bit 818" "Group 0,Group 1" bitfld.long 0x00 17. " GSB817 ,Group Status Bit 817" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB816 ,Group Status Bit 816" "Group 0,Group 1" bitfld.long 0x00 15. " GSB815 ,Group Status Bit 815" "Group 0,Group 1" bitfld.long 0x00 14. " GSB814 ,Group Status Bit 814" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB813 ,Group Status Bit 813" "Group 0,Group 1" bitfld.long 0x00 12. " GSB812 ,Group Status Bit 812" "Group 0,Group 1" bitfld.long 0x00 11. " GSB811 ,Group Status Bit 811" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB810 ,Group Status Bit 810" "Group 0,Group 1" bitfld.long 0x00 9. " GSB809 ,Group Status Bit 809" "Group 0,Group 1" bitfld.long 0x00 8. " GSB808 ,Group Status Bit 808" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB807 ,Group Status Bit 807" "Group 0,Group 1" bitfld.long 0x00 6. " GSB806 ,Group Status Bit 806" "Group 0,Group 1" bitfld.long 0x00 5. " GSB805 ,Group Status Bit 805" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB804 ,Group Status Bit 804" "Group 0,Group 1" bitfld.long 0x00 3. " GSB803 ,Group Status Bit 803" "Group 0,Group 1" bitfld.long 0x00 2. " GSB802 ,Group Status Bit 802" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB801 ,Group Status Bit 801" "Group 0,Group 1" bitfld.long 0x00 0. " GSB800 ,Group Status Bit 800" "Group 0,Group 1" else hgroup.long 0x00E4++0x03 hide.long 0x0 "GICD_IGROUPR25,Interrupt Group Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00E8)) group.long 0x00E8++0x03 line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Secure access)" bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB862 ,Group Status Bit 862" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB861 ,Group Status Bit 861" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB859 ,Group Status Bit 859" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB858 ,Group Status Bit 858" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB856 ,Group Status Bit 856" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB855 ,Group Status Bit 855" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB853 ,Group Status Bit 853" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB852 ,Group Status Bit 852" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB850 ,Group Status Bit 850" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB849 ,Group Status Bit 849" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB847 ,Group Status Bit 847" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB846 ,Group Status Bit 846" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB844 ,Group Status Bit 844" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB843 ,Group Status Bit 843" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB841 ,Group Status Bit 841" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB840 ,Group Status Bit 840" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB838 ,Group Status Bit 838" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB837 ,Group Status Bit 837" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB835 ,Group Status Bit 835" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB834 ,Group Status Bit 834" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB832 ,Group Status Bit 832" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A) group.long 0x00E8++0x03 line.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26 (Non-secure access)" bitfld.long 0x00 31. " GSB863 ,Group Status Bit 863" "Group 0,Group 1" bitfld.long 0x00 30. " GSB862 ,Group Status Bit 862" "Group 0,Group 1" bitfld.long 0x00 29. " GSB861 ,Group Status Bit 861" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB860 ,Group Status Bit 860" "Group 0,Group 1" bitfld.long 0x00 27. " GSB859 ,Group Status Bit 859" "Group 0,Group 1" bitfld.long 0x00 26. " GSB858 ,Group Status Bit 858" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB857 ,Group Status Bit 857" "Group 0,Group 1" bitfld.long 0x00 24. " GSB856 ,Group Status Bit 856" "Group 0,Group 1" bitfld.long 0x00 23. " GSB855 ,Group Status Bit 855" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB854 ,Group Status Bit 854" "Group 0,Group 1" bitfld.long 0x00 21. " GSB853 ,Group Status Bit 853" "Group 0,Group 1" bitfld.long 0x00 20. " GSB852 ,Group Status Bit 852" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB851 ,Group Status Bit 851" "Group 0,Group 1" bitfld.long 0x00 18. " GSB850 ,Group Status Bit 850" "Group 0,Group 1" bitfld.long 0x00 17. " GSB849 ,Group Status Bit 849" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB848 ,Group Status Bit 848" "Group 0,Group 1" bitfld.long 0x00 15. " GSB847 ,Group Status Bit 847" "Group 0,Group 1" bitfld.long 0x00 14. " GSB846 ,Group Status Bit 846" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB845 ,Group Status Bit 845" "Group 0,Group 1" bitfld.long 0x00 12. " GSB844 ,Group Status Bit 844" "Group 0,Group 1" bitfld.long 0x00 11. " GSB843 ,Group Status Bit 843" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB842 ,Group Status Bit 842" "Group 0,Group 1" bitfld.long 0x00 9. " GSB841 ,Group Status Bit 841" "Group 0,Group 1" bitfld.long 0x00 8. " GSB840 ,Group Status Bit 840" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB839 ,Group Status Bit 839" "Group 0,Group 1" bitfld.long 0x00 6. " GSB838 ,Group Status Bit 838" "Group 0,Group 1" bitfld.long 0x00 5. " GSB837 ,Group Status Bit 837" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB836 ,Group Status Bit 836" "Group 0,Group 1" bitfld.long 0x00 3. " GSB835 ,Group Status Bit 835" "Group 0,Group 1" bitfld.long 0x00 2. " GSB834 ,Group Status Bit 834" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB833 ,Group Status Bit 833" "Group 0,Group 1" bitfld.long 0x00 0. " GSB832 ,Group Status Bit 832" "Group 0,Group 1" else hgroup.long 0x00E8++0x03 hide.long 0x0 "GICD_IGROUPR26,Interrupt Group Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00EC)) group.long 0x00EC++0x03 line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Secure access)" bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB894 ,Group Status Bit 894" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB893 ,Group Status Bit 893" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB891 ,Group Status Bit 891" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB890 ,Group Status Bit 890" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB888 ,Group Status Bit 888" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB887 ,Group Status Bit 887" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB885 ,Group Status Bit 885" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB884 ,Group Status Bit 884" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB882 ,Group Status Bit 882" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB881 ,Group Status Bit 881" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB879 ,Group Status Bit 879" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB878 ,Group Status Bit 878" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB876 ,Group Status Bit 876" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB875 ,Group Status Bit 875" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB873 ,Group Status Bit 873" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB872 ,Group Status Bit 872" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB870 ,Group Status Bit 870" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB869 ,Group Status Bit 869" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB867 ,Group Status Bit 867" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB866 ,Group Status Bit 866" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB864 ,Group Status Bit 864" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B) group.long 0x00EC++0x03 line.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27 (Non-Secure access)" bitfld.long 0x00 31. " GSB895 ,Group Status Bit 895" "Group 0,Group 1" bitfld.long 0x00 30. " GSB894 ,Group Status Bit 894" "Group 0,Group 1" bitfld.long 0x00 29. " GSB893 ,Group Status Bit 893" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB892 ,Group Status Bit 892" "Group 0,Group 1" bitfld.long 0x00 27. " GSB891 ,Group Status Bit 891" "Group 0,Group 1" bitfld.long 0x00 26. " GSB890 ,Group Status Bit 890" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB889 ,Group Status Bit 889" "Group 0,Group 1" bitfld.long 0x00 24. " GSB888 ,Group Status Bit 888" "Group 0,Group 1" bitfld.long 0x00 23. " GSB887 ,Group Status Bit 887" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB886 ,Group Status Bit 886" "Group 0,Group 1" bitfld.long 0x00 21. " GSB885 ,Group Status Bit 885" "Group 0,Group 1" bitfld.long 0x00 20. " GSB884 ,Group Status Bit 884" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB883 ,Group Status Bit 883" "Group 0,Group 1" bitfld.long 0x00 18. " GSB882 ,Group Status Bit 882" "Group 0,Group 1" bitfld.long 0x00 17. " GSB881 ,Group Status Bit 881" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB880 ,Group Status Bit 880" "Group 0,Group 1" bitfld.long 0x00 15. " GSB879 ,Group Status Bit 879" "Group 0,Group 1" bitfld.long 0x00 14. " GSB878 ,Group Status Bit 878" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB877 ,Group Status Bit 877" "Group 0,Group 1" bitfld.long 0x00 12. " GSB876 ,Group Status Bit 876" "Group 0,Group 1" bitfld.long 0x00 11. " GSB875 ,Group Status Bit 875" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB874 ,Group Status Bit 874" "Group 0,Group 1" bitfld.long 0x00 9. " GSB873 ,Group Status Bit 873" "Group 0,Group 1" bitfld.long 0x00 8. " GSB872 ,Group Status Bit 872" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB871 ,Group Status Bit 871" "Group 0,Group 1" bitfld.long 0x00 6. " GSB870 ,Group Status Bit 870" "Group 0,Group 1" bitfld.long 0x00 5. " GSB869 ,Group Status Bit 869" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB868 ,Group Status Bit 868" "Group 0,Group 1" bitfld.long 0x00 3. " GSB867 ,Group Status Bit 867" "Group 0,Group 1" bitfld.long 0x00 2. " GSB866 ,Group Status Bit 866" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB865 ,Group Status Bit 865" "Group 0,Group 1" bitfld.long 0x00 0. " GSB864 ,Group Status Bit 864" "Group 0,Group 1" else hgroup.long 0x00EC++0x03 hide.long 0x0 "GICD_IGROUPR27,Interrupt Group Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00F0)) group.long 0x00F0++0x03 line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Secure access)" bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB926 ,Group Status Bit 926" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB925 ,Group Status Bit 925" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB923 ,Group Status Bit 923" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB922 ,Group Status Bit 922" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB920 ,Group Status Bit 920" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB919 ,Group Status Bit 919" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB917 ,Group Status Bit 917" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB916 ,Group Status Bit 916" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB914 ,Group Status Bit 914" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB913 ,Group Status Bit 913" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB911 ,Group Status Bit 911" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB910 ,Group Status Bit 910" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB908 ,Group Status Bit 908" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB907 ,Group Status Bit 907" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB905 ,Group Status Bit 905" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB904 ,Group Status Bit 904" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB902 ,Group Status Bit 902" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB901 ,Group Status Bit 901" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB899 ,Group Status Bit 899" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB898 ,Group Status Bit 898" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB896 ,Group Status Bit 896" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C) group.long 0x00F0++0x03 line.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28 (Non-secure access)" bitfld.long 0x00 31. " GSB927 ,Group Status Bit 927" "Group 0,Group 1" bitfld.long 0x00 30. " GSB926 ,Group Status Bit 926" "Group 0,Group 1" bitfld.long 0x00 29. " GSB925 ,Group Status Bit 925" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB924 ,Group Status Bit 924" "Group 0,Group 1" bitfld.long 0x00 27. " GSB923 ,Group Status Bit 923" "Group 0,Group 1" bitfld.long 0x00 26. " GSB922 ,Group Status Bit 922" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB921 ,Group Status Bit 921" "Group 0,Group 1" bitfld.long 0x00 24. " GSB920 ,Group Status Bit 920" "Group 0,Group 1" bitfld.long 0x00 23. " GSB919 ,Group Status Bit 919" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB918 ,Group Status Bit 918" "Group 0,Group 1" bitfld.long 0x00 21. " GSB917 ,Group Status Bit 917" "Group 0,Group 1" bitfld.long 0x00 20. " GSB916 ,Group Status Bit 916" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB915 ,Group Status Bit 915" "Group 0,Group 1" bitfld.long 0x00 18. " GSB914 ,Group Status Bit 914" "Group 0,Group 1" bitfld.long 0x00 17. " GSB913 ,Group Status Bit 913" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB912 ,Group Status Bit 912" "Group 0,Group 1" bitfld.long 0x00 15. " GSB911 ,Group Status Bit 911" "Group 0,Group 1" bitfld.long 0x00 14. " GSB910 ,Group Status Bit 910" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB909 ,Group Status Bit 909" "Group 0,Group 1" bitfld.long 0x00 12. " GSB908 ,Group Status Bit 908" "Group 0,Group 1" bitfld.long 0x00 11. " GSB907 ,Group Status Bit 907" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB906 ,Group Status Bit 906" "Group 0,Group 1" bitfld.long 0x00 9. " GSB905 ,Group Status Bit 905" "Group 0,Group 1" bitfld.long 0x00 8. " GSB904 ,Group Status Bit 904" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB903 ,Group Status Bit 903" "Group 0,Group 1" bitfld.long 0x00 6. " GSB902 ,Group Status Bit 902" "Group 0,Group 1" bitfld.long 0x00 5. " GSB901 ,Group Status Bit 901" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB900 ,Group Status Bit 900" "Group 0,Group 1" bitfld.long 0x00 3. " GSB899 ,Group Status Bit 899" "Group 0,Group 1" bitfld.long 0x00 2. " GSB898 ,Group Status Bit 898" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB897 ,Group Status Bit 897" "Group 0,Group 1" bitfld.long 0x00 0. " GSB896 ,Group Status Bit 896" "Group 0,Group 1" else hgroup.long 0x0F0++0x03 hide.long 0x0 "GICD_IGROUPR28,Interrupt Group Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00F4)) group.long 0x00F4++0x03 line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Secure access)" bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB958 ,Group Status Bit 958" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB957 ,Group Status Bit 957" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB955 ,Group Status Bit 955" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB954 ,Group Status Bit 954" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB952 ,Group Status Bit 952" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB951 ,Group Status Bit 951" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB949 ,Group Status Bit 949" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB948 ,Group Status Bit 948" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB946 ,Group Status Bit 946" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB945 ,Group Status Bit 945" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB943 ,Group Status Bit 943" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB942 ,Group Status Bit 942" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB940 ,Group Status Bit 940" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB939 ,Group Status Bit 939" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB937 ,Group Status Bit 937" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB936 ,Group Status Bit 936" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB934 ,Group Status Bit 934" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB933 ,Group Status Bit 933" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB931 ,Group Status Bit 931" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB930 ,Group Status Bit 930" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB928 ,Group Status Bit 928" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D) group.long 0x00F4++0x03 line.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29 (Non-secure access)" bitfld.long 0x00 31. " GSB959 ,Group Status Bit 959" "Group 0,Group 1" bitfld.long 0x00 30. " GSB958 ,Group Status Bit 958" "Group 0,Group 1" bitfld.long 0x00 29. " GSB957 ,Group Status Bit 957" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB956 ,Group Status Bit 956" "Group 0,Group 1" bitfld.long 0x00 27. " GSB955 ,Group Status Bit 955" "Group 0,Group 1" bitfld.long 0x00 26. " GSB954 ,Group Status Bit 954" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB953 ,Group Status Bit 953" "Group 0,Group 1" bitfld.long 0x00 24. " GSB952 ,Group Status Bit 952" "Group 0,Group 1" bitfld.long 0x00 23. " GSB951 ,Group Status Bit 951" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB950 ,Group Status Bit 950" "Group 0,Group 1" bitfld.long 0x00 21. " GSB949 ,Group Status Bit 949" "Group 0,Group 1" bitfld.long 0x00 20. " GSB948 ,Group Status Bit 948" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB947 ,Group Status Bit 947" "Group 0,Group 1" bitfld.long 0x00 18. " GSB946 ,Group Status Bit 946" "Group 0,Group 1" bitfld.long 0x00 17. " GSB945 ,Group Status Bit 945" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB944 ,Group Status Bit 944" "Group 0,Group 1" bitfld.long 0x00 15. " GSB943 ,Group Status Bit 943" "Group 0,Group 1" bitfld.long 0x00 14. " GSB942 ,Group Status Bit 942" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB941 ,Group Status Bit 941" "Group 0,Group 1" bitfld.long 0x00 12. " GSB940 ,Group Status Bit 940" "Group 0,Group 1" bitfld.long 0x00 11. " GSB939 ,Group Status Bit 939" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB938 ,Group Status Bit 938" "Group 0,Group 1" bitfld.long 0x00 9. " GSB937 ,Group Status Bit 937" "Group 0,Group 1" bitfld.long 0x00 8. " GSB936 ,Group Status Bit 936" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB935 ,Group Status Bit 935" "Group 0,Group 1" bitfld.long 0x00 6. " GSB934 ,Group Status Bit 934" "Group 0,Group 1" bitfld.long 0x00 5. " GSB933 ,Group Status Bit 933" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB932 ,Group Status Bit 932" "Group 0,Group 1" bitfld.long 0x00 3. " GSB931 ,Group Status Bit 931" "Group 0,Group 1" bitfld.long 0x00 2. " GSB930 ,Group Status Bit 930" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB929 ,Group Status Bit 929" "Group 0,Group 1" bitfld.long 0x00 0. " GSB928 ,Group Status Bit 928" "Group 0,Group 1" else hgroup.long 0x00F4++0x03 hide.long 0x0 "GICD_IGROUPR29,Interrupt Group Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00F8)) group.long 0x00F8++0x03 line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Secure access)" bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 30. " GSB990 ,Group Status Bit 990" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 29. " GSB989 ,Group Status Bit 989" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 27. " GSB987 ,Group Status Bit 987" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB986 ,Group Status Bit 986" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB984 ,Group Status Bit 984" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB983 ,Group Status Bit 983" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB981 ,Group Status Bit 981" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB980 ,Group Status Bit 980" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB978 ,Group Status Bit 978" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB977 ,Group Status Bit 977" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB975 ,Group Status Bit 975" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB974 ,Group Status Bit 974" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB972 ,Group Status Bit 972" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB971 ,Group Status Bit 971" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB969 ,Group Status Bit 969" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB968 ,Group Status Bit 968" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB966 ,Group Status Bit 966" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB965 ,Group Status Bit 965" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB963 ,Group Status Bit 963" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB962 ,Group Status Bit 962" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB960 ,Group Status Bit 960" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E) group.long 0x00F8++0x03 line.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30 (Non-secure access)" bitfld.long 0x00 31. " GSB991 ,Group Status Bit 991" "Group 0,Group 1" bitfld.long 0x00 30. " GSB990 ,Group Status Bit 990" "Group 0,Group 1" bitfld.long 0x00 29. " GSB989 ,Group Status Bit 989" "Group 0,Group 1" textline " " bitfld.long 0x00 28. " GSB988 ,Group Status Bit 988" "Group 0,Group 1" bitfld.long 0x00 27. " GSB987 ,Group Status Bit 987" "Group 0,Group 1" bitfld.long 0x00 26. " GSB986 ,Group Status Bit 986" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB985 ,Group Status Bit 985" "Group 0,Group 1" bitfld.long 0x00 24. " GSB984 ,Group Status Bit 984" "Group 0,Group 1" bitfld.long 0x00 23. " GSB983 ,Group Status Bit 983" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB982 ,Group Status Bit 982" "Group 0,Group 1" bitfld.long 0x00 21. " GSB981 ,Group Status Bit 981" "Group 0,Group 1" bitfld.long 0x00 20. " GSB980 ,Group Status Bit 980" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB979 ,Group Status Bit 979" "Group 0,Group 1" bitfld.long 0x00 18. " GSB978 ,Group Status Bit 978" "Group 0,Group 1" bitfld.long 0x00 17. " GSB977 ,Group Status Bit 977" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB976 ,Group Status Bit 976" "Group 0,Group 1" bitfld.long 0x00 15. " GSB975 ,Group Status Bit 975" "Group 0,Group 1" bitfld.long 0x00 14. " GSB974 ,Group Status Bit 974" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB973 ,Group Status Bit 973" "Group 0,Group 1" bitfld.long 0x00 12. " GSB972 ,Group Status Bit 972" "Group 0,Group 1" bitfld.long 0x00 11. " GSB971 ,Group Status Bit 971" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB970 ,Group Status Bit 970" "Group 0,Group 1" bitfld.long 0x00 9. " GSB969 ,Group Status Bit 969" "Group 0,Group 1" bitfld.long 0x00 8. " GSB968 ,Group Status Bit 968" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB967 ,Group Status Bit 967" "Group 0,Group 1" bitfld.long 0x00 6. " GSB966 ,Group Status Bit 966" "Group 0,Group 1" bitfld.long 0x00 5. " GSB965 ,Group Status Bit 965" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB964 ,Group Status Bit 964" "Group 0,Group 1" bitfld.long 0x00 3. " GSB963 ,Group Status Bit 963" "Group 0,Group 1" bitfld.long 0x00 2. " GSB962 ,Group Status Bit 962" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB961 ,Group Status Bit 961" "Group 0,Group 1" bitfld.long 0x00 0. " GSB960 ,Group Status Bit 960" "Group 0,Group 1" else hgroup.long 0x00F8++0x03 hide.long 0x0 "GICD_IGROUPR30,Interrupt Group Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)==0x1F)&&(PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x00FC)) group.long 0x00FC++0x03 line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31 (Secure access)" bitfld.long 0x00 27. " GSB1019 ,Group Status Bit 1019" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 26. " GSB1018 ,Group Status Bit 1018" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 25. " GSB1017 ,Group Status Bit 1017" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 24. " GSB1016 ,Group Status Bit 1016" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 23. " GSB1015 ,Group Status Bit 1015" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 22. " GSB1014 ,Group Status Bit 1014" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 21. " GSB1013 ,Group Status Bit 1013" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 20. " GSB1012 ,Group Status Bit 1012" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 19. " GSB1011 ,Group Status Bit 1011" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 18. " GSB1010 ,Group Status Bit 1010" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 17. " GSB1009 ,Group Status Bit 1009" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 16. " GSB1008 ,Group Status Bit 1008" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 15. " GSB1007 ,Group Status Bit 1007" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 14. " GSB1006 ,Group Status Bit 1006" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 13. " GSB1005 ,Group Status Bit 1005" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 12. " GSB1004 ,Group Status Bit 1004" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 11. " GSB1003 ,Group Status Bit 1003" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 10. " GSB1002 ,Group Status Bit 1002" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 9. " GSB1001 ,Group Status Bit 1001" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 8. " GSB1000 ,Group Status Bit 1000" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 7. " GSB999 ,Group Status Bit 999" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 6. " GSB998 ,Group Status Bit 998" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 5. " GSB997 ,Group Status Bit 997" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 4. " GSB996 ,Group Status Bit 996" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 3. " GSB995 ,Group Status Bit 995" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 2. " GSB994 ,Group Status Bit 994" "Group 0 (Secure),Group 1 (Non-secure)" textline " " bitfld.long 0x00 1. " GSB993 ,Group Status Bit 993" "Group 0 (Secure),Group 1 (Non-secure)" bitfld.long 0x00 0. " GSB992 ,Group Status Bit 992" "Group 0 (Secure),Group 1 (Non-secure)" elif (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)==0x1F) group.long 0x00FC++0x03 line.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31 (Non-secure access)" bitfld.long 0x00 27. " GSB1019 ,Group Status Bit 1019" "Group 0,Group 1" bitfld.long 0x00 26. " GSB1018 ,Group Status Bit 1018" "Group 0,Group 1" textline " " bitfld.long 0x00 25. " GSB1017 ,Group Status Bit 1017" "Group 0,Group 1" bitfld.long 0x00 24. " GSB1016 ,Group Status Bit 1016" "Group 0,Group 1" bitfld.long 0x00 23. " GSB1015 ,Group Status Bit 1015" "Group 0,Group 1" textline " " bitfld.long 0x00 22. " GSB1014 ,Group Status Bit 1014" "Group 0,Group 1" bitfld.long 0x00 21. " GSB1013 ,Group Status Bit 1013" "Group 0,Group 1" bitfld.long 0x00 20. " GSB1012 ,Group Status Bit 1012" "Group 0,Group 1" textline " " bitfld.long 0x00 19. " GSB1011 ,Group Status Bit 1011" "Group 0,Group 1" bitfld.long 0x00 18. " GSB1010 ,Group Status Bit 1010" "Group 0,Group 1" bitfld.long 0x00 17. " GSB1009 ,Group Status Bit 1009" "Group 0,Group 1" textline " " bitfld.long 0x00 16. " GSB1008 ,Group Status Bit 1008" "Group 0,Group 1" bitfld.long 0x00 15. " GSB1007 ,Group Status Bit 1007" "Group 0,Group 1" bitfld.long 0x00 14. " GSB1006 ,Group Status Bit 1006" "Group 0,Group 1" textline " " bitfld.long 0x00 13. " GSB1005 ,Group Status Bit 1005" "Group 0,Group 1" bitfld.long 0x00 12. " GSB1004 ,Group Status Bit 1004" "Group 0,Group 1" bitfld.long 0x00 11. " GSB1003 ,Group Status Bit 1003" "Group 0,Group 1" textline " " bitfld.long 0x00 10. " GSB1002 ,Group Status Bit 1002" "Group 0,Group 1" bitfld.long 0x00 9. " GSB1001 ,Group Status Bit 1001" "Group 0,Group 1" bitfld.long 0x00 8. " GSB1000 ,Group Status Bit 1000" "Group 0,Group 1" textline " " bitfld.long 0x00 7. " GSB999 ,Group Status Bit 999" "Group 0,Group 1" bitfld.long 0x00 6. " GSB998 ,Group Status Bit 998" "Group 0,Group 1" bitfld.long 0x00 5. " GSB997 ,Group Status Bit 997" "Group 0,Group 1" textline " " bitfld.long 0x00 4. " GSB996 ,Group Status Bit 996" "Group 0,Group 1" bitfld.long 0x00 3. " GSB995 ,Group Status Bit 995" "Group 0,Group 1" bitfld.long 0x00 2. " GSB994 ,Group Status Bit 994" "Group 0,Group 1" textline " " bitfld.long 0x00 1. " GSB993 ,Group Status Bit 993" "Group 0,Group 1" bitfld.long 0x00 0. " GSB992 ,Group Status Bit 992" "Group 0,Group 1" else hgroup.long 0x00FC++0x03 hide.long 0x0 "GICD_IGROUPR31,Interrupt Group Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end endif width 24. tree "Set/Clear Enable Registers" group.long 0x0100++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER0,Interrupt Set/Clear Enable Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB31 ,Set/Clear Enable Bit 31" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB30 ,Set/Clear Enable Bit 30" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB29 ,Set/Clear Enable Bit 29" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB28 ,Set/Clear Enable Bit 28" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB27 ,Set/Clear Enable Bit 27" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB26 ,Set/Clear Enable Bit 26" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB25 ,Set/Clear Enable Bit 25" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB24 ,Set/Clear Enable Bit 24" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB23 ,Set/Clear Enable Bit 23" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB22 ,Set/Clear Enable Bit 22" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB21 ,Set/Clear Enable Bit 21" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB20 ,Set/Clear Enable Bit 20" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB19 ,Set/Clear Enable Bit 19" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB18 ,Set/Clear Enable Bit 18" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB17 ,Set/Clear Enable Bit 17" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB16 ,Set/Clear Enable Bit 16" "Disabled,Enabled" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x01) group.long 0x0104++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB63 ,Set/Clear Enable Bit 63" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB62 ,Set/Clear Enable Bit 62" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB61 ,Set/Clear Enable Bit 61" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB60 ,Set/Clear Enable Bit 60" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB59 ,Set/Clear Enable Bit 59" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB58 ,Set/Clear Enable Bit 58" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB57 ,Set/Clear Enable Bit 57" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB56 ,Set/Clear Enable Bit 56" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB55 ,Set/Clear Enable Bit 55" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB54 ,Set/Clear Enable Bit 54" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB53 ,Set/Clear Enable Bit 53" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB52 ,Set/Clear Enable Bit 52" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB51 ,Set/Clear Enable Bit 51" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB50 ,Set/Clear Enable Bit 50" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB49 ,Set/Clear Enable Bit 49" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB48 ,Set/Clear Enable Bit 48" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB47 ,Set/Clear Enable Bit 47" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB46 ,Set/Clear Enable Bit 46" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB45 ,Set/Clear Enable Bit 45" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB44 ,Set/Clear Enable Bit 44" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB43 ,Set/Clear Enable Bit 43" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB42 ,Set/Clear Enable Bit 42" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB41 ,Set/Clear Enable Bit 41" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB40 ,Set/Clear Enable Bit 40" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB39 ,Set/Clear Enable Bit 39" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB38 ,Set/Clear Enable Bit 38" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB37 ,Set/Clear Enable Bit 37" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB36 ,Set/Clear Enable Bit 36" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB35 ,Set/Clear Enable Bit 35" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB34 ,Set/Clear Enable Bit 34" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB33 ,Set/Clear Enable Bit 33" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB32 ,Set/Clear Enable Bit 32" "Disabled,Enabled" else hgroup.long 0x0104++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER1,Interrupt Set/Clear Enable Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x02) group.long 0x0108++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB95 ,Set/Clear Enable Bit 95" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB94 ,Set/Clear Enable Bit 94" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB93 ,Set/Clear Enable Bit 93" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB92 ,Set/Clear Enable Bit 92" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB91 ,Set/Clear Enable Bit 91" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB90 ,Set/Clear Enable Bit 90" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB89 ,Set/Clear Enable Bit 89" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB88 ,Set/Clear Enable Bit 88" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB87 ,Set/Clear Enable Bit 87" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB86 ,Set/Clear Enable Bit 86" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB85 ,Set/Clear Enable Bit 85" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB84 ,Set/Clear Enable Bit 84" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB83 ,Set/Clear Enable Bit 83" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB82 ,Set/Clear Enable Bit 82" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB81 ,Set/Clear Enable Bit 81" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB80 ,Set/Clear Enable Bit 80" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB79 ,Set/Clear Enable Bit 79" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB78 ,Set/Clear Enable Bit 78" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB77 ,Set/Clear Enable Bit 77" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB76 ,Set/Clear Enable Bit 76" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB75 ,Set/Clear Enable Bit 75" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB74 ,Set/Clear Enable Bit 74" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB73 ,Set/Clear Enable Bit 73" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB72 ,Set/Clear Enable Bit 72" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB71 ,Set/Clear Enable Bit 71" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB70 ,Set/Clear Enable Bit 70" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB69 ,Set/Clear Enable Bit 69" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB68 ,Set/Clear Enable Bit 68" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB67 ,Set/Clear Enable Bit 67" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB66 ,Set/Clear Enable Bit 66" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB65 ,Set/Clear Enable Bit 65" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB64 ,Set/Clear Enable Bit 64" "Disabled,Enabled" else hgroup.long 0x0108++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER2,Interrupt Set/Clear Enable Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x03) group.long 0x010C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB127 ,Set/Clear Enable Bit 127" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB126 ,Set/Clear Enable Bit 126" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB125 ,Set/Clear Enable Bit 125" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB124 ,Set/Clear Enable Bit 124" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB123 ,Set/Clear Enable Bit 123" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB122 ,Set/Clear Enable Bit 122" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB121 ,Set/Clear Enable Bit 121" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB120 ,Set/Clear Enable Bit 120" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB119 ,Set/Clear Enable Bit 119" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB118 ,Set/Clear Enable Bit 118" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB117 ,Set/Clear Enable Bit 117" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB116 ,Set/Clear Enable Bit 116" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB115 ,Set/Clear Enable Bit 115" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB114 ,Set/Clear Enable Bit 114" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB113 ,Set/Clear Enable Bit 113" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB112 ,Set/Clear Enable Bit 112" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB111 ,Set/Clear Enable Bit 111" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB110 ,Set/Clear Enable Bit 110" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB109 ,Set/Clear Enable Bit 109" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB108 ,Set/Clear Enable Bit 108" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB107 ,Set/Clear Enable Bit 107" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB106 ,Set/Clear Enable Bit 106" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB105 ,Set/Clear Enable Bit 105" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB104 ,Set/Clear Enable Bit 104" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB103 ,Set/Clear Enable Bit 103" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB102 ,Set/Clear Enable Bit 102" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB101 ,Set/Clear Enable Bit 101" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB100 ,Set/Clear Enable Bit 100" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB99 ,Set/Clear Enable Bit 99" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB98 ,Set/Clear Enable Bit 98" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB97 ,Set/Clear Enable Bit 97" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB96 ,Set/Clear Enable Bit 96" "Disabled,Enabled" else hgroup.long 0x010C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER3,Interrupt Set/Clear Enable Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x04) group.long 0x0110++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB159 ,Set/Clear Enable Bit 159" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB158 ,Set/Clear Enable Bit 158" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB157 ,Set/Clear Enable Bit 157" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB156 ,Set/Clear Enable Bit 156" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB155 ,Set/Clear Enable Bit 155" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB154 ,Set/Clear Enable Bit 154" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB153 ,Set/Clear Enable Bit 153" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB152 ,Set/Clear Enable Bit 152" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB151 ,Set/Clear Enable Bit 151" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB150 ,Set/Clear Enable Bit 150" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB149 ,Set/Clear Enable Bit 149" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB148 ,Set/Clear Enable Bit 148" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB147 ,Set/Clear Enable Bit 147" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB146 ,Set/Clear Enable Bit 146" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB145 ,Set/Clear Enable Bit 145" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB144 ,Set/Clear Enable Bit 144" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB143 ,Set/Clear Enable Bit 143" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB142 ,Set/Clear Enable Bit 142" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB141 ,Set/Clear Enable Bit 141" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB140 ,Set/Clear Enable Bit 140" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB139 ,Set/Clear Enable Bit 139" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB138 ,Set/Clear Enable Bit 138" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB137 ,Set/Clear Enable Bit 137" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB136 ,Set/Clear Enable Bit 136" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB135 ,Set/Clear Enable Bit 135" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB134 ,Set/Clear Enable Bit 134" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB133 ,Set/Clear Enable Bit 133" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB132 ,Set/Clear Enable Bit 132" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB131 ,Set/Clear Enable Bit 131" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB130 ,Set/Clear Enable Bit 130" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB129 ,Set/Clear Enable Bit 129" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB128 ,Set/Clear Enable Bit 128" "Disabled,Enabled" else hgroup.long 0x0110++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER4,Interrupt Set/Clear Enable Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x05) group.long 0x0114++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB191 ,Set/Clear Enable Bit 191" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB190 ,Set/Clear Enable Bit 190" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB189 ,Set/Clear Enable Bit 189" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB188 ,Set/Clear Enable Bit 188" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB187 ,Set/Clear Enable Bit 187" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB186 ,Set/Clear Enable Bit 186" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB185 ,Set/Clear Enable Bit 185" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB184 ,Set/Clear Enable Bit 184" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB183 ,Set/Clear Enable Bit 183" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB182 ,Set/Clear Enable Bit 182" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB181 ,Set/Clear Enable Bit 181" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB180 ,Set/Clear Enable Bit 180" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB179 ,Set/Clear Enable Bit 179" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB178 ,Set/Clear Enable Bit 178" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB177 ,Set/Clear Enable Bit 177" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB176 ,Set/Clear Enable Bit 176" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB175 ,Set/Clear Enable Bit 175" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB174 ,Set/Clear Enable Bit 174" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB173 ,Set/Clear Enable Bit 173" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB172 ,Set/Clear Enable Bit 172" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB171 ,Set/Clear Enable Bit 171" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB170 ,Set/Clear Enable Bit 170" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB169 ,Set/Clear Enable Bit 169" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB168 ,Set/Clear Enable Bit 168" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB167 ,Set/Clear Enable Bit 167" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB166 ,Set/Clear Enable Bit 166" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB165 ,Set/Clear Enable Bit 165" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB164 ,Set/Clear Enable Bit 164" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB163 ,Set/Clear Enable Bit 163" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB162 ,Set/Clear Enable Bit 162" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB161 ,Set/Clear Enable Bit 161" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB160 ,Set/Clear Enable Bit 160" "Disabled,Enabled" else hgroup.long 0x0114++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER5,Interrupt Set/Clear Enable Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x06) group.long 0x0118++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB223 ,Set/Clear Enable Bit 223" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB222 ,Set/Clear Enable Bit 222" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB221 ,Set/Clear Enable Bit 221" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB220 ,Set/Clear Enable Bit 220" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB219 ,Set/Clear Enable Bit 219" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB218 ,Set/Clear Enable Bit 218" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB217 ,Set/Clear Enable Bit 217" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB216 ,Set/Clear Enable Bit 216" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB215 ,Set/Clear Enable Bit 215" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB214 ,Set/Clear Enable Bit 214" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB213 ,Set/Clear Enable Bit 213" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB212 ,Set/Clear Enable Bit 212" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB211 ,Set/Clear Enable Bit 211" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB210 ,Set/Clear Enable Bit 210" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB209 ,Set/Clear Enable Bit 209" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB208 ,Set/Clear Enable Bit 208" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB207 ,Set/Clear Enable Bit 207" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB206 ,Set/Clear Enable Bit 206" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB205 ,Set/Clear Enable Bit 205" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB204 ,Set/Clear Enable Bit 204" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB203 ,Set/Clear Enable Bit 203" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB202 ,Set/Clear Enable Bit 202" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB201 ,Set/Clear Enable Bit 201" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB200 ,Set/Clear Enable Bit 200" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB199 ,Set/Clear Enable Bit 199" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB198 ,Set/Clear Enable Bit 198" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB197 ,Set/Clear Enable Bit 197" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB196 ,Set/Clear Enable Bit 196" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB195 ,Set/Clear Enable Bit 195" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB194 ,Set/Clear Enable Bit 194" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB193 ,Set/Clear Enable Bit 193" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB192 ,Set/Clear Enable Bit 192" "Disabled,Enabled" else hgroup.long 0x0118++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER6,Interrupt Set/Clear Enable Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x07) group.long 0x011C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB255 ,Set/Clear Enable Bit 255" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB254 ,Set/Clear Enable Bit 254" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB253 ,Set/Clear Enable Bit 253" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB252 ,Set/Clear Enable Bit 252" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB251 ,Set/Clear Enable Bit 251" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB250 ,Set/Clear Enable Bit 250" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB249 ,Set/Clear Enable Bit 249" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB248 ,Set/Clear Enable Bit 248" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB247 ,Set/Clear Enable Bit 247" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB246 ,Set/Clear Enable Bit 246" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB245 ,Set/Clear Enable Bit 245" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB244 ,Set/Clear Enable Bit 244" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB243 ,Set/Clear Enable Bit 243" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB242 ,Set/Clear Enable Bit 242" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB241 ,Set/Clear Enable Bit 241" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB240 ,Set/Clear Enable Bit 240" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB239 ,Set/Clear Enable Bit 239" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB238 ,Set/Clear Enable Bit 238" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB237 ,Set/Clear Enable Bit 237" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB236 ,Set/Clear Enable Bit 236" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB235 ,Set/Clear Enable Bit 235" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB234 ,Set/Clear Enable Bit 234" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB233 ,Set/Clear Enable Bit 233" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB232 ,Set/Clear Enable Bit 232" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB231 ,Set/Clear Enable Bit 231" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB230 ,Set/Clear Enable Bit 230" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB229 ,Set/Clear Enable Bit 229" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB228 ,Set/Clear Enable Bit 228" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB227 ,Set/Clear Enable Bit 227" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB226 ,Set/Clear Enable Bit 226" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB225 ,Set/Clear Enable Bit 225" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB224 ,Set/Clear Enable Bit 224" "Disabled,Enabled" else hgroup.long 0x011C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER7,Interrupt Set/Clear Enable Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x08) group.long 0x0120++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB287 ,Set/Clear Enable Bit 287" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB286 ,Set/Clear Enable Bit 286" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB285 ,Set/Clear Enable Bit 285" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB284 ,Set/Clear Enable Bit 284" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB283 ,Set/Clear Enable Bit 283" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB282 ,Set/Clear Enable Bit 282" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB281 ,Set/Clear Enable Bit 281" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB280 ,Set/Clear Enable Bit 280" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB279 ,Set/Clear Enable Bit 279" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB278 ,Set/Clear Enable Bit 278" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB277 ,Set/Clear Enable Bit 277" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB276 ,Set/Clear Enable Bit 276" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB275 ,Set/Clear Enable Bit 275" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB274 ,Set/Clear Enable Bit 274" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB273 ,Set/Clear Enable Bit 273" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB272 ,Set/Clear Enable Bit 272" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB271 ,Set/Clear Enable Bit 271" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB270 ,Set/Clear Enable Bit 270" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB269 ,Set/Clear Enable Bit 269" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB268 ,Set/Clear Enable Bit 268" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB267 ,Set/Clear Enable Bit 267" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB266 ,Set/Clear Enable Bit 266" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB265 ,Set/Clear Enable Bit 265" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB264 ,Set/Clear Enable Bit 264" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB263 ,Set/Clear Enable Bit 263" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB262 ,Set/Clear Enable Bit 262" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB261 ,Set/Clear Enable Bit 261" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB260 ,Set/Clear Enable Bit 260" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB259 ,Set/Clear Enable Bit 259" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB258 ,Set/Clear Enable Bit 258" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB257 ,Set/Clear Enable Bit 257" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB256 ,Set/Clear Enable Bit 256" "Disabled,Enabled" else hgroup.long 0x0120++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER8,Interrupt Set/Clear Enable Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x09) group.long 0x0124++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB319 ,Set/Clear Enable Bit 319" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB318 ,Set/Clear Enable Bit 318" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB317 ,Set/Clear Enable Bit 317" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB316 ,Set/Clear Enable Bit 316" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB315 ,Set/Clear Enable Bit 315" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB314 ,Set/Clear Enable Bit 314" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB313 ,Set/Clear Enable Bit 313" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB312 ,Set/Clear Enable Bit 312" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB311 ,Set/Clear Enable Bit 311" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB310 ,Set/Clear Enable Bit 310" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB309 ,Set/Clear Enable Bit 309" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB308 ,Set/Clear Enable Bit 308" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB307 ,Set/Clear Enable Bit 307" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB306 ,Set/Clear Enable Bit 306" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB305 ,Set/Clear Enable Bit 305" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB304 ,Set/Clear Enable Bit 304" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB303 ,Set/Clear Enable Bit 303" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB302 ,Set/Clear Enable Bit 302" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB301 ,Set/Clear Enable Bit 301" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB300 ,Set/Clear Enable Bit 300" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB299 ,Set/Clear Enable Bit 299" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB298 ,Set/Clear Enable Bit 298" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB297 ,Set/Clear Enable Bit 297" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB296 ,Set/Clear Enable Bit 296" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB295 ,Set/Clear Enable Bit 295" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB294 ,Set/Clear Enable Bit 294" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB293 ,Set/Clear Enable Bit 293" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB292 ,Set/Clear Enable Bit 292" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB291 ,Set/Clear Enable Bit 291" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB290 ,Set/Clear Enable Bit 290" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB289 ,Set/Clear Enable Bit 289" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB288 ,Set/Clear Enable Bit 288" "Disabled,Enabled" else hgroup.long 0x0124++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER9,Interrupt Set/Clear Enable Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0A) group.long 0x0128++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB351 ,Set/Clear Enable Bit 351" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB350 ,Set/Clear Enable Bit 350" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB349 ,Set/Clear Enable Bit 349" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB348 ,Set/Clear Enable Bit 348" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB347 ,Set/Clear Enable Bit 347" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB346 ,Set/Clear Enable Bit 346" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB345 ,Set/Clear Enable Bit 345" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB344 ,Set/Clear Enable Bit 344" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB343 ,Set/Clear Enable Bit 343" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB342 ,Set/Clear Enable Bit 342" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB341 ,Set/Clear Enable Bit 341" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB340 ,Set/Clear Enable Bit 340" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB339 ,Set/Clear Enable Bit 339" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB338 ,Set/Clear Enable Bit 338" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB337 ,Set/Clear Enable Bit 337" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB336 ,Set/Clear Enable Bit 336" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB335 ,Set/Clear Enable Bit 335" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB334 ,Set/Clear Enable Bit 334" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB333 ,Set/Clear Enable Bit 333" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB332 ,Set/Clear Enable Bit 332" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB331 ,Set/Clear Enable Bit 331" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB330 ,Set/Clear Enable Bit 330" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB329 ,Set/Clear Enable Bit 329" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB328 ,Set/Clear Enable Bit 328" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB327 ,Set/Clear Enable Bit 327" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB326 ,Set/Clear Enable Bit 326" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB325 ,Set/Clear Enable Bit 325" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB324 ,Set/Clear Enable Bit 324" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB323 ,Set/Clear Enable Bit 323" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB322 ,Set/Clear Enable Bit 322" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB321 ,Set/Clear Enable Bit 321" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB320 ,Set/Clear Enable Bit 320" "Disabled,Enabled" else hgroup.long 0x0128++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER10,Interrupt Set/Clear Enable Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0B) group.long 0x012C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB383 ,Set/Clear Enable Bit 383" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB382 ,Set/Clear Enable Bit 382" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB381 ,Set/Clear Enable Bit 381" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB380 ,Set/Clear Enable Bit 380" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB379 ,Set/Clear Enable Bit 379" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB378 ,Set/Clear Enable Bit 378" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB377 ,Set/Clear Enable Bit 377" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB376 ,Set/Clear Enable Bit 376" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB375 ,Set/Clear Enable Bit 375" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB374 ,Set/Clear Enable Bit 374" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB373 ,Set/Clear Enable Bit 373" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB372 ,Set/Clear Enable Bit 372" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB371 ,Set/Clear Enable Bit 371" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB370 ,Set/Clear Enable Bit 370" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB369 ,Set/Clear Enable Bit 369" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB368 ,Set/Clear Enable Bit 368" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB367 ,Set/Clear Enable Bit 367" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB366 ,Set/Clear Enable Bit 366" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB365 ,Set/Clear Enable Bit 365" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB364 ,Set/Clear Enable Bit 364" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB363 ,Set/Clear Enable Bit 363" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB362 ,Set/Clear Enable Bit 362" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB361 ,Set/Clear Enable Bit 361" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB360 ,Set/Clear Enable Bit 360" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB359 ,Set/Clear Enable Bit 359" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB358 ,Set/Clear Enable Bit 358" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB357 ,Set/Clear Enable Bit 357" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB356 ,Set/Clear Enable Bit 356" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB355 ,Set/Clear Enable Bit 355" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB354 ,Set/Clear Enable Bit 354" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB353 ,Set/Clear Enable Bit 353" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB352 ,Set/Clear Enable Bit 352" "Disabled,Enabled" else hgroup.long 0x012C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER11,Interrupt Set/Clear Enable Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0C) group.long 0x0130++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB415 ,Set/Clear Enable Bit 415" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB414 ,Set/Clear Enable Bit 414" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB413 ,Set/Clear Enable Bit 413" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB412 ,Set/Clear Enable Bit 412" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB411 ,Set/Clear Enable Bit 411" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB410 ,Set/Clear Enable Bit 410" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB409 ,Set/Clear Enable Bit 409" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB408 ,Set/Clear Enable Bit 408" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB407 ,Set/Clear Enable Bit 407" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB406 ,Set/Clear Enable Bit 406" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB405 ,Set/Clear Enable Bit 405" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB404 ,Set/Clear Enable Bit 404" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB403 ,Set/Clear Enable Bit 403" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB402 ,Set/Clear Enable Bit 402" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB401 ,Set/Clear Enable Bit 401" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB400 ,Set/Clear Enable Bit 400" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB399 ,Set/Clear Enable Bit 399" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB398 ,Set/Clear Enable Bit 398" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB397 ,Set/Clear Enable Bit 397" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB396 ,Set/Clear Enable Bit 396" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB395 ,Set/Clear Enable Bit 395" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB394 ,Set/Clear Enable Bit 394" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB393 ,Set/Clear Enable Bit 393" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB392 ,Set/Clear Enable Bit 392" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB391 ,Set/Clear Enable Bit 391" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB390 ,Set/Clear Enable Bit 390" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB389 ,Set/Clear Enable Bit 389" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB388 ,Set/Clear Enable Bit 388" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB387 ,Set/Clear Enable Bit 387" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB386 ,Set/Clear Enable Bit 386" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB385 ,Set/Clear Enable Bit 385" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB384 ,Set/Clear Enable Bit 384" "Disabled,Enabled" else hgroup.long 0x0130++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER12,Interrupt Set/Clear Enable Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0D) group.long 0x0134++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB447 ,Set/Clear Enable Bit 447" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB446 ,Set/Clear Enable Bit 446" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB445 ,Set/Clear Enable Bit 445" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB444 ,Set/Clear Enable Bit 444" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB443 ,Set/Clear Enable Bit 443" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB442 ,Set/Clear Enable Bit 442" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB441 ,Set/Clear Enable Bit 441" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB440 ,Set/Clear Enable Bit 440" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB439 ,Set/Clear Enable Bit 439" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB438 ,Set/Clear Enable Bit 438" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB437 ,Set/Clear Enable Bit 437" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB436 ,Set/Clear Enable Bit 436" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB435 ,Set/Clear Enable Bit 435" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB434 ,Set/Clear Enable Bit 434" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB433 ,Set/Clear Enable Bit 433" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB432 ,Set/Clear Enable Bit 432" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB431 ,Set/Clear Enable Bit 431" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB430 ,Set/Clear Enable Bit 430" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB429 ,Set/Clear Enable Bit 429" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB428 ,Set/Clear Enable Bit 428" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB427 ,Set/Clear Enable Bit 427" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB426 ,Set/Clear Enable Bit 426" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB425 ,Set/Clear Enable Bit 425" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB424 ,Set/Clear Enable Bit 424" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB423 ,Set/Clear Enable Bit 423" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB422 ,Set/Clear Enable Bit 422" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB421 ,Set/Clear Enable Bit 421" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB420 ,Set/Clear Enable Bit 420" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB419 ,Set/Clear Enable Bit 419" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB418 ,Set/Clear Enable Bit 418" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB417 ,Set/Clear Enable Bit 417" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB416 ,Set/Clear Enable Bit 416" "Disabled,Enabled" else hgroup.long 0x0134++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER13,Interrupt Set/Clear Enable Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0E) group.long 0x0138++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB479 ,Set/Clear Enable Bit 479" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB478 ,Set/Clear Enable Bit 478" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB477 ,Set/Clear Enable Bit 477" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB476 ,Set/Clear Enable Bit 476" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB475 ,Set/Clear Enable Bit 475" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB474 ,Set/Clear Enable Bit 474" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB473 ,Set/Clear Enable Bit 473" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB472 ,Set/Clear Enable Bit 472" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB471 ,Set/Clear Enable Bit 471" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB470 ,Set/Clear Enable Bit 470" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB469 ,Set/Clear Enable Bit 469" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB468 ,Set/Clear Enable Bit 468" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB467 ,Set/Clear Enable Bit 467" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB466 ,Set/Clear Enable Bit 466" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB465 ,Set/Clear Enable Bit 465" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB464 ,Set/Clear Enable Bit 464" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB463 ,Set/Clear Enable Bit 463" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB462 ,Set/Clear Enable Bit 462" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB461 ,Set/Clear Enable Bit 461" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB460 ,Set/Clear Enable Bit 460" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB459 ,Set/Clear Enable Bit 459" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB458 ,Set/Clear Enable Bit 458" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB457 ,Set/Clear Enable Bit 457" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB456 ,Set/Clear Enable Bit 456" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB455 ,Set/Clear Enable Bit 455" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB454 ,Set/Clear Enable Bit 454" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB453 ,Set/Clear Enable Bit 453" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB452 ,Set/Clear Enable Bit 452" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB451 ,Set/Clear Enable Bit 451" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB450 ,Set/Clear Enable Bit 450" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB449 ,Set/Clear Enable Bit 449" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB448 ,Set/Clear Enable Bit 448" "Disabled,Enabled" else hgroup.long 0x0138++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER14,Interrupt Set/Clear Enable Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0F) group.long 0x013C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB511 ,Set/Clear Enable Bit 511" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB510 ,Set/Clear Enable Bit 510" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB509 ,Set/Clear Enable Bit 509" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB508 ,Set/Clear Enable Bit 508" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB507 ,Set/Clear Enable Bit 507" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB506 ,Set/Clear Enable Bit 506" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB505 ,Set/Clear Enable Bit 505" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB504 ,Set/Clear Enable Bit 504" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB503 ,Set/Clear Enable Bit 503" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB502 ,Set/Clear Enable Bit 502" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB501 ,Set/Clear Enable Bit 501" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB500 ,Set/Clear Enable Bit 500" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB499 ,Set/Clear Enable Bit 499" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB498 ,Set/Clear Enable Bit 498" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB497 ,Set/Clear Enable Bit 497" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB496 ,Set/Clear Enable Bit 496" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB495 ,Set/Clear Enable Bit 495" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB494 ,Set/Clear Enable Bit 494" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB493 ,Set/Clear Enable Bit 493" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB492 ,Set/Clear Enable Bit 492" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB491 ,Set/Clear Enable Bit 491" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB490 ,Set/Clear Enable Bit 490" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB489 ,Set/Clear Enable Bit 489" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB488 ,Set/Clear Enable Bit 488" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB487 ,Set/Clear Enable Bit 487" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB486 ,Set/Clear Enable Bit 486" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB485 ,Set/Clear Enable Bit 485" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB484 ,Set/Clear Enable Bit 484" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB483 ,Set/Clear Enable Bit 483" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB482 ,Set/Clear Enable Bit 482" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB481 ,Set/Clear Enable Bit 481" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB480 ,Set/Clear Enable Bit 480" "Disabled,Enabled" else hgroup.long 0x013C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER15,Interrupt Set/Clear Enable Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10) group.long 0x0140++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB543 ,Set/Clear Enable Bit 543" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB542 ,Set/Clear Enable Bit 542" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB541 ,Set/Clear Enable Bit 541" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB540 ,Set/Clear Enable Bit 540" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB539 ,Set/Clear Enable Bit 539" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB538 ,Set/Clear Enable Bit 538" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB537 ,Set/Clear Enable Bit 537" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB536 ,Set/Clear Enable Bit 536" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB535 ,Set/Clear Enable Bit 535" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB534 ,Set/Clear Enable Bit 534" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB533 ,Set/Clear Enable Bit 533" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB532 ,Set/Clear Enable Bit 532" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB531 ,Set/Clear Enable Bit 531" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB530 ,Set/Clear Enable Bit 530" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB529 ,Set/Clear Enable Bit 529" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB528 ,Set/Clear Enable Bit 528" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB527 ,Set/Clear Enable Bit 527" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB526 ,Set/Clear Enable Bit 526" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB525 ,Set/Clear Enable Bit 525" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB524 ,Set/Clear Enable Bit 524" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB523 ,Set/Clear Enable Bit 523" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB522 ,Set/Clear Enable Bit 522" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB521 ,Set/Clear Enable Bit 521" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB520 ,Set/Clear Enable Bit 520" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB519 ,Set/Clear Enable Bit 519" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB518 ,Set/Clear Enable Bit 518" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB517 ,Set/Clear Enable Bit 517" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB516 ,Set/Clear Enable Bit 516" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB515 ,Set/Clear Enable Bit 515" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB514 ,Set/Clear Enable Bit 514" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB513 ,Set/Clear Enable Bit 513" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB512 ,Set/Clear Enable Bit 512" "Disabled,Enabled" else hgroup.long 0x0140++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER16,Interrupt Set/Clear Enable Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11) group.long 0x0144++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB575 ,Set/Clear Enable Bit 575" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB574 ,Set/Clear Enable Bit 574" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB573 ,Set/Clear Enable Bit 573" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB572 ,Set/Clear Enable Bit 572" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB571 ,Set/Clear Enable Bit 571" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB570 ,Set/Clear Enable Bit 570" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB569 ,Set/Clear Enable Bit 569" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB568 ,Set/Clear Enable Bit 568" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB567 ,Set/Clear Enable Bit 567" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB566 ,Set/Clear Enable Bit 566" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB565 ,Set/Clear Enable Bit 565" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB564 ,Set/Clear Enable Bit 564" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB563 ,Set/Clear Enable Bit 563" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB562 ,Set/Clear Enable Bit 562" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB561 ,Set/Clear Enable Bit 561" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB560 ,Set/Clear Enable Bit 560" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB559 ,Set/Clear Enable Bit 559" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB558 ,Set/Clear Enable Bit 558" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB557 ,Set/Clear Enable Bit 557" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB556 ,Set/Clear Enable Bit 556" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB555 ,Set/Clear Enable Bit 555" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB554 ,Set/Clear Enable Bit 554" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB553 ,Set/Clear Enable Bit 553" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB552 ,Set/Clear Enable Bit 552" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB551 ,Set/Clear Enable Bit 551" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB550 ,Set/Clear Enable Bit 550" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB549 ,Set/Clear Enable Bit 549" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB548 ,Set/Clear Enable Bit 548" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB547 ,Set/Clear Enable Bit 547" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB546 ,Set/Clear Enable Bit 546" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB545 ,Set/Clear Enable Bit 545" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB544 ,Set/Clear Enable Bit 544" "Disabled,Enabled" else hgroup.long 0x0144++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER17,Interrupt Set/Clear Enable Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12) group.long 0x0148++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB607 ,Set/Clear Enable Bit 607" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB606 ,Set/Clear Enable Bit 606" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB605 ,Set/Clear Enable Bit 605" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB604 ,Set/Clear Enable Bit 604" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB603 ,Set/Clear Enable Bit 603" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB602 ,Set/Clear Enable Bit 602" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB601 ,Set/Clear Enable Bit 601" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB600 ,Set/Clear Enable Bit 600" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB599 ,Set/Clear Enable Bit 599" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB598 ,Set/Clear Enable Bit 598" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB597 ,Set/Clear Enable Bit 597" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB596 ,Set/Clear Enable Bit 596" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB595 ,Set/Clear Enable Bit 595" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB594 ,Set/Clear Enable Bit 594" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB593 ,Set/Clear Enable Bit 593" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB592 ,Set/Clear Enable Bit 592" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB591 ,Set/Clear Enable Bit 591" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB590 ,Set/Clear Enable Bit 590" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB589 ,Set/Clear Enable Bit 589" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB588 ,Set/Clear Enable Bit 588" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB587 ,Set/Clear Enable Bit 587" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB586 ,Set/Clear Enable Bit 586" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB585 ,Set/Clear Enable Bit 585" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB584 ,Set/Clear Enable Bit 584" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB583 ,Set/Clear Enable Bit 583" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB582 ,Set/Clear Enable Bit 582" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB581 ,Set/Clear Enable Bit 581" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB580 ,Set/Clear Enable Bit 580" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB579 ,Set/Clear Enable Bit 579" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB578 ,Set/Clear Enable Bit 578" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB577 ,Set/Clear Enable Bit 577" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB576 ,Set/Clear Enable Bit 576" "Disabled,Enabled" else hgroup.long 0x0148++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER18,Interrupt Set/Clear Enable Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13) group.long 0x014C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB639 ,Set/Clear Enable Bit 639" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB638 ,Set/Clear Enable Bit 638" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB637 ,Set/Clear Enable Bit 637" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB636 ,Set/Clear Enable Bit 636" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB635 ,Set/Clear Enable Bit 635" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB634 ,Set/Clear Enable Bit 634" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB633 ,Set/Clear Enable Bit 633" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB632 ,Set/Clear Enable Bit 632" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB631 ,Set/Clear Enable Bit 631" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB630 ,Set/Clear Enable Bit 630" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB629 ,Set/Clear Enable Bit 629" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB628 ,Set/Clear Enable Bit 628" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB627 ,Set/Clear Enable Bit 627" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB626 ,Set/Clear Enable Bit 626" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB625 ,Set/Clear Enable Bit 625" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB624 ,Set/Clear Enable Bit 624" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB623 ,Set/Clear Enable Bit 623" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB622 ,Set/Clear Enable Bit 622" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB621 ,Set/Clear Enable Bit 621" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB620 ,Set/Clear Enable Bit 620" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB619 ,Set/Clear Enable Bit 619" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB618 ,Set/Clear Enable Bit 618" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB617 ,Set/Clear Enable Bit 617" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB616 ,Set/Clear Enable Bit 616" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB615 ,Set/Clear Enable Bit 615" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB614 ,Set/Clear Enable Bit 614" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB613 ,Set/Clear Enable Bit 613" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB612 ,Set/Clear Enable Bit 612" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB611 ,Set/Clear Enable Bit 611" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB610 ,Set/Clear Enable Bit 610" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB609 ,Set/Clear Enable Bit 609" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB608 ,Set/Clear Enable Bit 608" "Disabled,Enabled" else hgroup.long 0x014C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER19,Interrupt Set/Clear Enable Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14) group.long 0x0150++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB671 ,Set/Clear Enable Bit 671" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB670 ,Set/Clear Enable Bit 670" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB669 ,Set/Clear Enable Bit 669" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB668 ,Set/Clear Enable Bit 668" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB667 ,Set/Clear Enable Bit 667" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB666 ,Set/Clear Enable Bit 666" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB665 ,Set/Clear Enable Bit 665" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB664 ,Set/Clear Enable Bit 664" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB663 ,Set/Clear Enable Bit 663" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB662 ,Set/Clear Enable Bit 662" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB661 ,Set/Clear Enable Bit 661" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB660 ,Set/Clear Enable Bit 660" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB659 ,Set/Clear Enable Bit 659" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB658 ,Set/Clear Enable Bit 658" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB657 ,Set/Clear Enable Bit 657" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB656 ,Set/Clear Enable Bit 656" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB655 ,Set/Clear Enable Bit 655" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB654 ,Set/Clear Enable Bit 654" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB653 ,Set/Clear Enable Bit 653" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB652 ,Set/Clear Enable Bit 652" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB651 ,Set/Clear Enable Bit 651" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB650 ,Set/Clear Enable Bit 650" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB649 ,Set/Clear Enable Bit 649" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB648 ,Set/Clear Enable Bit 648" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB647 ,Set/Clear Enable Bit 647" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB646 ,Set/Clear Enable Bit 646" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB645 ,Set/Clear Enable Bit 645" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB644 ,Set/Clear Enable Bit 644" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB643 ,Set/Clear Enable Bit 643" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB642 ,Set/Clear Enable Bit 642" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB641 ,Set/Clear Enable Bit 641" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB640 ,Set/Clear Enable Bit 640" "Disabled,Enabled" else hgroup.long 0x0150++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER20,Interrupt Set/Clear Enable Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15) group.long 0x0154++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB703 ,Set/Clear Enable Bit 703" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB702 ,Set/Clear Enable Bit 702" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB701 ,Set/Clear Enable Bit 701" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB700 ,Set/Clear Enable Bit 700" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB699 ,Set/Clear Enable Bit 699" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB698 ,Set/Clear Enable Bit 698" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB697 ,Set/Clear Enable Bit 697" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB696 ,Set/Clear Enable Bit 696" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB695 ,Set/Clear Enable Bit 695" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB694 ,Set/Clear Enable Bit 694" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB693 ,Set/Clear Enable Bit 693" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB692 ,Set/Clear Enable Bit 692" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB691 ,Set/Clear Enable Bit 691" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB690 ,Set/Clear Enable Bit 690" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB689 ,Set/Clear Enable Bit 689" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB688 ,Set/Clear Enable Bit 688" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB687 ,Set/Clear Enable Bit 687" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB686 ,Set/Clear Enable Bit 686" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB685 ,Set/Clear Enable Bit 685" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB684 ,Set/Clear Enable Bit 684" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB683 ,Set/Clear Enable Bit 683" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB682 ,Set/Clear Enable Bit 682" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB681 ,Set/Clear Enable Bit 681" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB680 ,Set/Clear Enable Bit 680" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB679 ,Set/Clear Enable Bit 679" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB678 ,Set/Clear Enable Bit 678" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB677 ,Set/Clear Enable Bit 677" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB676 ,Set/Clear Enable Bit 676" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB675 ,Set/Clear Enable Bit 675" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB674 ,Set/Clear Enable Bit 674" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB673 ,Set/Clear Enable Bit 673" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB672 ,Set/Clear Enable Bit 672" "Disabled,Enabled" else hgroup.long 0x0154++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER21,Interrupt Set/Clear Enable Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16) group.long 0x0158++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB735 ,Set/Clear Enable Bit 735" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB734 ,Set/Clear Enable Bit 734" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB733 ,Set/Clear Enable Bit 733" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB732 ,Set/Clear Enable Bit 732" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB731 ,Set/Clear Enable Bit 731" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB730 ,Set/Clear Enable Bit 730" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB729 ,Set/Clear Enable Bit 729" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB728 ,Set/Clear Enable Bit 728" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB727 ,Set/Clear Enable Bit 727" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB726 ,Set/Clear Enable Bit 726" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB725 ,Set/Clear Enable Bit 725" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB724 ,Set/Clear Enable Bit 724" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB723 ,Set/Clear Enable Bit 723" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB722 ,Set/Clear Enable Bit 722" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB721 ,Set/Clear Enable Bit 721" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB720 ,Set/Clear Enable Bit 720" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB719 ,Set/Clear Enable Bit 719" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB718 ,Set/Clear Enable Bit 718" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB717 ,Set/Clear Enable Bit 717" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB716 ,Set/Clear Enable Bit 716" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB715 ,Set/Clear Enable Bit 715" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB714 ,Set/Clear Enable Bit 714" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB713 ,Set/Clear Enable Bit 713" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB712 ,Set/Clear Enable Bit 712" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB711 ,Set/Clear Enable Bit 711" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB710 ,Set/Clear Enable Bit 710" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB709 ,Set/Clear Enable Bit 709" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB708 ,Set/Clear Enable Bit 708" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB707 ,Set/Clear Enable Bit 707" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB706 ,Set/Clear Enable Bit 706" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB705 ,Set/Clear Enable Bit 705" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB704 ,Set/Clear Enable Bit 704" "Disabled,Enabled" else hgroup.long 0x0158++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER22,Interrupt Set/Clear Enable Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17) group.long 0x015C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB767 ,Set/Clear Enable Bit 767" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB766 ,Set/Clear Enable Bit 766" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB765 ,Set/Clear Enable Bit 765" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB764 ,Set/Clear Enable Bit 764" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB763 ,Set/Clear Enable Bit 763" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB762 ,Set/Clear Enable Bit 762" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB761 ,Set/Clear Enable Bit 761" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB760 ,Set/Clear Enable Bit 760" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB759 ,Set/Clear Enable Bit 759" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB758 ,Set/Clear Enable Bit 758" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB757 ,Set/Clear Enable Bit 757" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB756 ,Set/Clear Enable Bit 756" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB755 ,Set/Clear Enable Bit 755" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB754 ,Set/Clear Enable Bit 754" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB753 ,Set/Clear Enable Bit 753" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB752 ,Set/Clear Enable Bit 752" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB751 ,Set/Clear Enable Bit 751" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB750 ,Set/Clear Enable Bit 750" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB749 ,Set/Clear Enable Bit 749" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB748 ,Set/Clear Enable Bit 748" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB747 ,Set/Clear Enable Bit 747" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB746 ,Set/Clear Enable Bit 746" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB745 ,Set/Clear Enable Bit 745" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB744 ,Set/Clear Enable Bit 744" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB743 ,Set/Clear Enable Bit 743" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB742 ,Set/Clear Enable Bit 742" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB741 ,Set/Clear Enable Bit 741" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB740 ,Set/Clear Enable Bit 740" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB739 ,Set/Clear Enable Bit 739" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB738 ,Set/Clear Enable Bit 738" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB737 ,Set/Clear Enable Bit 737" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB736 ,Set/Clear Enable Bit 736" "Disabled,Enabled" else hgroup.long 0x015C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER23,Interrupt Set/Clear Enable Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18) group.long 0x0160++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB799 ,Set/Clear Enable Bit 799" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB798 ,Set/Clear Enable Bit 798" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB797 ,Set/Clear Enable Bit 797" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB796 ,Set/Clear Enable Bit 796" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB795 ,Set/Clear Enable Bit 795" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB794 ,Set/Clear Enable Bit 794" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB793 ,Set/Clear Enable Bit 793" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB792 ,Set/Clear Enable Bit 792" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB791 ,Set/Clear Enable Bit 791" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB790 ,Set/Clear Enable Bit 790" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB789 ,Set/Clear Enable Bit 789" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB788 ,Set/Clear Enable Bit 788" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB787 ,Set/Clear Enable Bit 787" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB786 ,Set/Clear Enable Bit 786" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB785 ,Set/Clear Enable Bit 785" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB784 ,Set/Clear Enable Bit 784" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB783 ,Set/Clear Enable Bit 783" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB782 ,Set/Clear Enable Bit 782" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB781 ,Set/Clear Enable Bit 781" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB780 ,Set/Clear Enable Bit 780" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB779 ,Set/Clear Enable Bit 779" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB778 ,Set/Clear Enable Bit 778" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB777 ,Set/Clear Enable Bit 777" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB776 ,Set/Clear Enable Bit 776" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB775 ,Set/Clear Enable Bit 775" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB774 ,Set/Clear Enable Bit 774" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB773 ,Set/Clear Enable Bit 773" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB772 ,Set/Clear Enable Bit 772" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB771 ,Set/Clear Enable Bit 771" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB770 ,Set/Clear Enable Bit 770" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB769 ,Set/Clear Enable Bit 769" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB768 ,Set/Clear Enable Bit 768" "Disabled,Enabled" else hgroup.long 0x0160++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER24,Interrupt Set/Clear Enable Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19) group.long 0x0164++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB831 ,Set/Clear Enable Bit 831" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB830 ,Set/Clear Enable Bit 830" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB829 ,Set/Clear Enable Bit 829" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB828 ,Set/Clear Enable Bit 828" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB827 ,Set/Clear Enable Bit 827" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB826 ,Set/Clear Enable Bit 826" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB825 ,Set/Clear Enable Bit 825" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB824 ,Set/Clear Enable Bit 824" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB823 ,Set/Clear Enable Bit 823" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB822 ,Set/Clear Enable Bit 822" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB821 ,Set/Clear Enable Bit 821" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB820 ,Set/Clear Enable Bit 820" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB819 ,Set/Clear Enable Bit 819" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB818 ,Set/Clear Enable Bit 818" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB817 ,Set/Clear Enable Bit 817" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB816 ,Set/Clear Enable Bit 816" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB815 ,Set/Clear Enable Bit 815" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB814 ,Set/Clear Enable Bit 814" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB813 ,Set/Clear Enable Bit 813" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB812 ,Set/Clear Enable Bit 812" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB811 ,Set/Clear Enable Bit 811" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB810 ,Set/Clear Enable Bit 810" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB809 ,Set/Clear Enable Bit 809" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB808 ,Set/Clear Enable Bit 808" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB807 ,Set/Clear Enable Bit 807" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB806 ,Set/Clear Enable Bit 806" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB805 ,Set/Clear Enable Bit 805" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB804 ,Set/Clear Enable Bit 804" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB803 ,Set/Clear Enable Bit 803" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB802 ,Set/Clear Enable Bit 802" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB801 ,Set/Clear Enable Bit 801" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB800 ,Set/Clear Enable Bit 800" "Disabled,Enabled" else hgroup.long 0x0164++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER25,Interrupt Set/Clear Enable Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A) group.long 0x0168++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB863 ,Set/Clear Enable Bit 863" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB862 ,Set/Clear Enable Bit 862" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB861 ,Set/Clear Enable Bit 861" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB860 ,Set/Clear Enable Bit 860" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB859 ,Set/Clear Enable Bit 859" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB858 ,Set/Clear Enable Bit 858" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB857 ,Set/Clear Enable Bit 857" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB856 ,Set/Clear Enable Bit 856" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB855 ,Set/Clear Enable Bit 855" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB854 ,Set/Clear Enable Bit 854" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB853 ,Set/Clear Enable Bit 853" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB852 ,Set/Clear Enable Bit 852" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB851 ,Set/Clear Enable Bit 851" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB850 ,Set/Clear Enable Bit 850" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB849 ,Set/Clear Enable Bit 849" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB848 ,Set/Clear Enable Bit 848" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB847 ,Set/Clear Enable Bit 847" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB846 ,Set/Clear Enable Bit 846" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB845 ,Set/Clear Enable Bit 845" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB844 ,Set/Clear Enable Bit 844" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB843 ,Set/Clear Enable Bit 843" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB842 ,Set/Clear Enable Bit 842" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB841 ,Set/Clear Enable Bit 841" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB840 ,Set/Clear Enable Bit 840" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB839 ,Set/Clear Enable Bit 839" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB838 ,Set/Clear Enable Bit 838" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB837 ,Set/Clear Enable Bit 837" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB836 ,Set/Clear Enable Bit 836" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB835 ,Set/Clear Enable Bit 835" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB834 ,Set/Clear Enable Bit 834" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB833 ,Set/Clear Enable Bit 833" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB832 ,Set/Clear Enable Bit 832" "Disabled,Enabled" else hgroup.long 0x0168++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER26,Interrupt Set/Clear Enable Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B) group.long 0x016C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB895 ,Set/Clear Enable Bit 895" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB894 ,Set/Clear Enable Bit 894" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB893 ,Set/Clear Enable Bit 893" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB892 ,Set/Clear Enable Bit 892" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB891 ,Set/Clear Enable Bit 891" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB890 ,Set/Clear Enable Bit 890" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB889 ,Set/Clear Enable Bit 889" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB888 ,Set/Clear Enable Bit 888" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB887 ,Set/Clear Enable Bit 887" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB886 ,Set/Clear Enable Bit 886" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB885 ,Set/Clear Enable Bit 885" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB884 ,Set/Clear Enable Bit 884" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB883 ,Set/Clear Enable Bit 883" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB882 ,Set/Clear Enable Bit 882" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB881 ,Set/Clear Enable Bit 881" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB880 ,Set/Clear Enable Bit 880" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB879 ,Set/Clear Enable Bit 879" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB878 ,Set/Clear Enable Bit 878" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB877 ,Set/Clear Enable Bit 877" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB876 ,Set/Clear Enable Bit 876" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB875 ,Set/Clear Enable Bit 875" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB874 ,Set/Clear Enable Bit 874" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB873 ,Set/Clear Enable Bit 873" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB872 ,Set/Clear Enable Bit 872" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB871 ,Set/Clear Enable Bit 871" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB870 ,Set/Clear Enable Bit 870" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB869 ,Set/Clear Enable Bit 869" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB868 ,Set/Clear Enable Bit 868" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB867 ,Set/Clear Enable Bit 867" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB866 ,Set/Clear Enable Bit 866" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB865 ,Set/Clear Enable Bit 865" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB864 ,Set/Clear Enable Bit 864" "Disabled,Enabled" else hgroup.long 0x016C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER27,Interrupt Set/Clear Enable Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C) group.long 0x0170++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB927 ,Set/Clear Enable Bit 927" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB926 ,Set/Clear Enable Bit 926" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB925 ,Set/Clear Enable Bit 925" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB924 ,Set/Clear Enable Bit 924" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB923 ,Set/Clear Enable Bit 923" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB922 ,Set/Clear Enable Bit 922" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB921 ,Set/Clear Enable Bit 921" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB920 ,Set/Clear Enable Bit 920" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB919 ,Set/Clear Enable Bit 919" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB918 ,Set/Clear Enable Bit 918" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB917 ,Set/Clear Enable Bit 917" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB916 ,Set/Clear Enable Bit 916" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB915 ,Set/Clear Enable Bit 915" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB914 ,Set/Clear Enable Bit 914" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB913 ,Set/Clear Enable Bit 913" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB912 ,Set/Clear Enable Bit 912" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB911 ,Set/Clear Enable Bit 911" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB910 ,Set/Clear Enable Bit 910" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB909 ,Set/Clear Enable Bit 909" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB908 ,Set/Clear Enable Bit 908" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB907 ,Set/Clear Enable Bit 907" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB906 ,Set/Clear Enable Bit 906" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB905 ,Set/Clear Enable Bit 905" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB904 ,Set/Clear Enable Bit 904" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB903 ,Set/Clear Enable Bit 903" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB902 ,Set/Clear Enable Bit 902" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB901 ,Set/Clear Enable Bit 901" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB900 ,Set/Clear Enable Bit 900" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB899 ,Set/Clear Enable Bit 899" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB898 ,Set/Clear Enable Bit 898" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB897 ,Set/Clear Enable Bit 897" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB896 ,Set/Clear Enable Bit 896" "Disabled,Enabled" else hgroup.long 0x0170++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER28,Interrupt Set/Clear Enable Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D) group.long 0x0174++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB959 ,Set/Clear Enable Bit 959" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB958 ,Set/Clear Enable Bit 958" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB957 ,Set/Clear Enable Bit 957" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB956 ,Set/Clear Enable Bit 956" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB955 ,Set/Clear Enable Bit 955" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB954 ,Set/Clear Enable Bit 954" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB953 ,Set/Clear Enable Bit 953" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB952 ,Set/Clear Enable Bit 952" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB951 ,Set/Clear Enable Bit 951" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB950 ,Set/Clear Enable Bit 950" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB949 ,Set/Clear Enable Bit 949" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB948 ,Set/Clear Enable Bit 948" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB947 ,Set/Clear Enable Bit 947" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB946 ,Set/Clear Enable Bit 946" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB945 ,Set/Clear Enable Bit 945" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB944 ,Set/Clear Enable Bit 944" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB943 ,Set/Clear Enable Bit 943" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB942 ,Set/Clear Enable Bit 942" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB941 ,Set/Clear Enable Bit 941" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB940 ,Set/Clear Enable Bit 940" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB939 ,Set/Clear Enable Bit 939" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB938 ,Set/Clear Enable Bit 938" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB937 ,Set/Clear Enable Bit 937" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB936 ,Set/Clear Enable Bit 936" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB935 ,Set/Clear Enable Bit 935" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB934 ,Set/Clear Enable Bit 934" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB933 ,Set/Clear Enable Bit 933" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB932 ,Set/Clear Enable Bit 932" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB931 ,Set/Clear Enable Bit 931" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB930 ,Set/Clear Enable Bit 930" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB929 ,Set/Clear Enable Bit 929" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB928 ,Set/Clear Enable Bit 928" "Disabled,Enabled" else hgroup.long 0x0174++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER29,Interrupt Set/Clear Enable Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E) group.long 0x0178++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRENB991 ,Set/Clear Enable Bit 991" "Disabled,Enabled" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRENB990 ,Set/Clear Enable Bit 990" "Disabled,Enabled" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRENB989 ,Set/Clear Enable Bit 989" "Disabled,Enabled" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRENB988 ,Set/Clear Enable Bit 988" "Disabled,Enabled" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB987 ,Set/Clear Enable Bit 987" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB986 ,Set/Clear Enable Bit 986" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB985 ,Set/Clear Enable Bit 985" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB984 ,Set/Clear Enable Bit 984" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB983 ,Set/Clear Enable Bit 983" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB982 ,Set/Clear Enable Bit 982" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB981 ,Set/Clear Enable Bit 981" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB980 ,Set/Clear Enable Bit 980" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB979 ,Set/Clear Enable Bit 979" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB978 ,Set/Clear Enable Bit 978" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB977 ,Set/Clear Enable Bit 977" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB976 ,Set/Clear Enable Bit 976" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB975 ,Set/Clear Enable Bit 975" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB974 ,Set/Clear Enable Bit 974" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB973 ,Set/Clear Enable Bit 973" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB972 ,Set/Clear Enable Bit 972" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB971 ,Set/Clear Enable Bit 971" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB970 ,Set/Clear Enable Bit 970" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB969 ,Set/Clear Enable Bit 969" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB968 ,Set/Clear Enable Bit 968" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB967 ,Set/Clear Enable Bit 967" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB966 ,Set/Clear Enable Bit 966" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB965 ,Set/Clear Enable Bit 965" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB964 ,Set/Clear Enable Bit 964" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB963 ,Set/Clear Enable Bit 963" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB962 ,Set/Clear Enable Bit 962" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB961 ,Set/Clear Enable Bit 961" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB960 ,Set/Clear Enable Bit 960" "Disabled,Enabled" else hgroup.long 0x0178++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER30,Interrupt Set/Clear Enable Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)==0x1F) group.long 0x017C++0x03 line.long 0x0 "GICD_SET/CLR_ENABLER31,Interrupt Set/Clear Enable Register 31" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRENB1019 ,Set/Clear Enable Bit 1019" "Disabled,Enabled" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRENB1018 ,Set/Clear Enable Bit 1018" "Disabled,Enabled" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRENB1017 ,Set/Clear Enable Bit 1017" "Disabled,Enabled" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRENB1016 ,Set/Clear Enable Bit 1016" "Disabled,Enabled" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRENB1015 ,Set/Clear Enable Bit 1015" "Disabled,Enabled" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRENB1014 ,Set/Clear Enable Bit 1014" "Disabled,Enabled" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRENB1013 ,Set/Clear Enable Bit 1013" "Disabled,Enabled" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRENB1012 ,Set/Clear Enable Bit 1012" "Disabled,Enabled" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRENB1011 ,Set/Clear Enable Bit 1011" "Disabled,Enabled" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRENB1010 ,Set/Clear Enable Bit 1010" "Disabled,Enabled" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRENB1009 ,Set/Clear Enable Bit 1009" "Disabled,Enabled" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRENB1008 ,Set/Clear Enable Bit 1008" "Disabled,Enabled" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRENB1007 ,Set/Clear Enable Bit 1007" "Disabled,Enabled" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRENB1006 ,Set/Clear Enable Bit 1006" "Disabled,Enabled" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRENB1005 ,Set/Clear Enable Bit 1005" "Disabled,Enabled" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRENB1004 ,Set/Clear Enable Bit 1004" "Disabled,Enabled" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRENB1003 ,Set/Clear Enable Bit 1003" "Disabled,Enabled" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRENB1002 ,Set/Clear Enable Bit 1002" "Disabled,Enabled" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRENB1001 ,Set/Clear Enable Bit 1001" "Disabled,Enabled" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRENB1000 ,Set/Clear Enable Bit 1000" "Disabled,Enabled" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRENB999 ,Set/Clear Enable Bit 999" "Disabled,Enabled" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRENB998 ,Set/Clear Enable Bit 998" "Disabled,Enabled" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRENB997 ,Set/Clear Enable Bit 997" "Disabled,Enabled" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRENB996 ,Set/Clear Enable Bit 996" "Disabled,Enabled" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRENB995 ,Set/Clear Enable Bit 995" "Disabled,Enabled" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRENB994 ,Set/Clear Enable Bit 994" "Disabled,Enabled" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRENB993 ,Set/Clear Enable Bit 993" "Disabled,Enabled" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRENB992 ,Set/Clear Enable Bit 992" "Disabled,Enabled" else hgroup.long 0x017C++0x03 hide.long 0x0 "GICD_SET/CLR_ENABLER31,Interrupt Set/Clear Enable Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 22. tree "Set/Clear Pending Registers" group.long 0x0200++0x03 line.long 0x0 "GICD_SET/CLR_PENDR0,Interrupt Set/Clear Pending Register 0" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND31 ,Set/Clear Pending Bit 31" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND30 ,Set/Clear Pending Bit 30" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND29 ,Set/Clear Pending Bit 29" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND28 ,Set/Clear Pending Bit 28" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND27 ,Set/Clear Pending Bit 27" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND26 ,Set/Clear Pending Bit 26" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND25 ,Set/Clear Pending Bit 25" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND24 ,Set/Clear Pending Bit 24" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND23 ,Set/Clear Pending Bit 23" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND22 ,Set/Clear Pending Bit 22" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND21 ,Set/Clear Pending Bit 21" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND20 ,Set/Clear Pending Bit 20" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND19 ,Set/Clear Pending Bit 19" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND18 ,Set/Clear Pending Bit 18" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND17 ,Set/Clear Pending Bit 17" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND16 ,Set/Clear Pending Bit 16" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND15 ,Set/Clear Pending Bit 15" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND14 ,Set/Clear Pending Bit 14" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND13 ,Set/Clear Pending Bit 13" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND12 ,Set/Clear Pending Bit 12" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND11 ,Set/Clear Pending Bit 11" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND10 ,Set/Clear Pending Bit 10" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND9 ,Set/Clear Pending Bit 9" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND8 ,Set/Clear Pending Bit 8" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND7 ,Set/Clear Pending Bit 7" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND6 ,Set/Clear Pending Bit 6" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND5 ,Set/Clear Pending Bit 5" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND4 ,Set/Clear Pending Bit 4" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND3 ,Set/Clear Pending Bit 3" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND2 ,Set/Clear Pending Bit 2" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND1 ,Set/Clear Pending Bit 1" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND0 ,Set/Clear Pending Bit 0" "Not pending,Pending" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x01) group.long 0x0204++0x03 line.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND63 ,Set/Clear Pending Bit 63" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND62 ,Set/Clear Pending Bit 62" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND61 ,Set/Clear Pending Bit 61" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND60 ,Set/Clear Pending Bit 60" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND59 ,Set/Clear Pending Bit 59" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND58 ,Set/Clear Pending Bit 58" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND57 ,Set/Clear Pending Bit 57" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND56 ,Set/Clear Pending Bit 56" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND55 ,Set/Clear Pending Bit 55" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND54 ,Set/Clear Pending Bit 54" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND53 ,Set/Clear Pending Bit 53" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND52 ,Set/Clear Pending Bit 52" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND51 ,Set/Clear Pending Bit 51" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND50 ,Set/Clear Pending Bit 50" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND49 ,Set/Clear Pending Bit 49" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND48 ,Set/Clear Pending Bit 48" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND47 ,Set/Clear Pending Bit 47" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND46 ,Set/Clear Pending Bit 46" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND45 ,Set/Clear Pending Bit 45" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND44 ,Set/Clear Pending Bit 44" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND43 ,Set/Clear Pending Bit 43" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND42 ,Set/Clear Pending Bit 42" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND41 ,Set/Clear Pending Bit 41" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND40 ,Set/Clear Pending Bit 40" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND39 ,Set/Clear Pending Bit 39" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND38 ,Set/Clear Pending Bit 38" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND37 ,Set/Clear Pending Bit 37" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND36 ,Set/Clear Pending Bit 36" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND35 ,Set/Clear Pending Bit 35" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND34 ,Set/Clear Pending Bit 34" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND33 ,Set/Clear Pending Bit 33" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND32 ,Set/Clear Pending Bit 32" "Not pending,Pending" else hgroup.long 0x0204++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR1,Interrupt Set/Clear Pending Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x02) group.long 0x0208++0x03 line.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND95 ,Set/Clear Pending Bit 95" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND94 ,Set/Clear Pending Bit 94" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND93 ,Set/Clear Pending Bit 93" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND92 ,Set/Clear Pending Bit 92" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND91 ,Set/Clear Pending Bit 91" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND90 ,Set/Clear Pending Bit 90" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND89 ,Set/Clear Pending Bit 89" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND88 ,Set/Clear Pending Bit 88" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND87 ,Set/Clear Pending Bit 87" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND86 ,Set/Clear Pending Bit 86" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND85 ,Set/Clear Pending Bit 85" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND84 ,Set/Clear Pending Bit 84" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND83 ,Set/Clear Pending Bit 83" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND82 ,Set/Clear Pending Bit 82" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND81 ,Set/Clear Pending Bit 81" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND80 ,Set/Clear Pending Bit 80" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND79 ,Set/Clear Pending Bit 79" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND78 ,Set/Clear Pending Bit 78" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND77 ,Set/Clear Pending Bit 77" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND76 ,Set/Clear Pending Bit 76" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND75 ,Set/Clear Pending Bit 75" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND74 ,Set/Clear Pending Bit 74" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND73 ,Set/Clear Pending Bit 73" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND72 ,Set/Clear Pending Bit 72" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND71 ,Set/Clear Pending Bit 71" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND70 ,Set/Clear Pending Bit 70" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND69 ,Set/Clear Pending Bit 69" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND68 ,Set/Clear Pending Bit 68" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND67 ,Set/Clear Pending Bit 67" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND66 ,Set/Clear Pending Bit 66" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND65 ,Set/Clear Pending Bit 65" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND64 ,Set/Clear Pending Bit 64" "Not pending,Pending" else hgroup.long 0x0208++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR2,Interrupt Set/Clear Pending Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x03) group.long 0x020C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND127 ,Set/Clear Pending Bit 127" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND126 ,Set/Clear Pending Bit 126" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND125 ,Set/Clear Pending Bit 125" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND124 ,Set/Clear Pending Bit 124" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND123 ,Set/Clear Pending Bit 123" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND122 ,Set/Clear Pending Bit 122" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND121 ,Set/Clear Pending Bit 121" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND120 ,Set/Clear Pending Bit 120" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND119 ,Set/Clear Pending Bit 119" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND118 ,Set/Clear Pending Bit 118" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND117 ,Set/Clear Pending Bit 117" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND116 ,Set/Clear Pending Bit 116" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND115 ,Set/Clear Pending Bit 115" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND114 ,Set/Clear Pending Bit 114" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND113 ,Set/Clear Pending Bit 113" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND112 ,Set/Clear Pending Bit 112" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND111 ,Set/Clear Pending Bit 111" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND110 ,Set/Clear Pending Bit 110" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND109 ,Set/Clear Pending Bit 109" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND108 ,Set/Clear Pending Bit 108" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND107 ,Set/Clear Pending Bit 107" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND106 ,Set/Clear Pending Bit 106" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND105 ,Set/Clear Pending Bit 105" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND104 ,Set/Clear Pending Bit 104" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND103 ,Set/Clear Pending Bit 103" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND102 ,Set/Clear Pending Bit 102" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND101 ,Set/Clear Pending Bit 101" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND100 ,Set/Clear Pending Bit 100" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND99 ,Set/Clear Pending Bit 99" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND98 ,Set/Clear Pending Bit 98" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND97 ,Set/Clear Pending Bit 97" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND96 ,Set/Clear Pending Bit 96" "Not pending,Pending" else hgroup.long 0x020C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR3,Interrupt Set/Clear Pending Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x04) group.long 0x0210++0x03 line.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND159 ,Set/Clear Pending Bit 159" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND158 ,Set/Clear Pending Bit 158" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND157 ,Set/Clear Pending Bit 157" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND156 ,Set/Clear Pending Bit 156" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND155 ,Set/Clear Pending Bit 155" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND154 ,Set/Clear Pending Bit 154" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND153 ,Set/Clear Pending Bit 153" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND152 ,Set/Clear Pending Bit 152" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND151 ,Set/Clear Pending Bit 151" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND150 ,Set/Clear Pending Bit 150" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND149 ,Set/Clear Pending Bit 149" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND148 ,Set/Clear Pending Bit 148" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND147 ,Set/Clear Pending Bit 147" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND146 ,Set/Clear Pending Bit 146" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND145 ,Set/Clear Pending Bit 145" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND144 ,Set/Clear Pending Bit 144" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND143 ,Set/Clear Pending Bit 143" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND142 ,Set/Clear Pending Bit 142" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND141 ,Set/Clear Pending Bit 141" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND140 ,Set/Clear Pending Bit 140" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND139 ,Set/Clear Pending Bit 139" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND138 ,Set/Clear Pending Bit 138" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND137 ,Set/Clear Pending Bit 137" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND136 ,Set/Clear Pending Bit 136" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND135 ,Set/Clear Pending Bit 135" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND134 ,Set/Clear Pending Bit 134" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND133 ,Set/Clear Pending Bit 133" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND132 ,Set/Clear Pending Bit 132" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND131 ,Set/Clear Pending Bit 131" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND130 ,Set/Clear Pending Bit 130" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND129 ,Set/Clear Pending Bit 129" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND128 ,Set/Clear Pending Bit 128" "Not pending,Pending" else hgroup.long 0x0210++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR4,Interrupt Set/Clear Pending Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x05) group.long 0x0214++0x03 line.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND191 ,Set/Clear Pending Bit 191" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND190 ,Set/Clear Pending Bit 190" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND189 ,Set/Clear Pending Bit 189" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND188 ,Set/Clear Pending Bit 188" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND187 ,Set/Clear Pending Bit 187" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND186 ,Set/Clear Pending Bit 186" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND185 ,Set/Clear Pending Bit 185" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND184 ,Set/Clear Pending Bit 184" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND183 ,Set/Clear Pending Bit 183" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND182 ,Set/Clear Pending Bit 182" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND181 ,Set/Clear Pending Bit 181" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND180 ,Set/Clear Pending Bit 180" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND179 ,Set/Clear Pending Bit 179" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND178 ,Set/Clear Pending Bit 178" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND177 ,Set/Clear Pending Bit 177" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND176 ,Set/Clear Pending Bit 176" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND175 ,Set/Clear Pending Bit 175" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND174 ,Set/Clear Pending Bit 174" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND173 ,Set/Clear Pending Bit 173" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND172 ,Set/Clear Pending Bit 172" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND171 ,Set/Clear Pending Bit 171" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND170 ,Set/Clear Pending Bit 170" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND169 ,Set/Clear Pending Bit 169" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND168 ,Set/Clear Pending Bit 168" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND167 ,Set/Clear Pending Bit 167" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND166 ,Set/Clear Pending Bit 166" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND165 ,Set/Clear Pending Bit 165" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND164 ,Set/Clear Pending Bit 164" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND163 ,Set/Clear Pending Bit 163" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND162 ,Set/Clear Pending Bit 162" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND161 ,Set/Clear Pending Bit 161" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND160 ,Set/Clear Pending Bit 160" "Not pending,Pending" else hgroup.long 0x0214++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR5,Interrupt Set/Clear Pending Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x06) group.long 0x0218++0x03 line.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND223 ,Set/Clear Pending Bit 223" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND222 ,Set/Clear Pending Bit 222" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND221 ,Set/Clear Pending Bit 221" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND220 ,Set/Clear Pending Bit 220" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND219 ,Set/Clear Pending Bit 219" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND218 ,Set/Clear Pending Bit 218" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND217 ,Set/Clear Pending Bit 217" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND216 ,Set/Clear Pending Bit 216" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND215 ,Set/Clear Pending Bit 215" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND214 ,Set/Clear Pending Bit 214" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND213 ,Set/Clear Pending Bit 213" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND212 ,Set/Clear Pending Bit 212" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND211 ,Set/Clear Pending Bit 211" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND210 ,Set/Clear Pending Bit 210" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND209 ,Set/Clear Pending Bit 209" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND208 ,Set/Clear Pending Bit 208" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND207 ,Set/Clear Pending Bit 207" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND206 ,Set/Clear Pending Bit 206" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND205 ,Set/Clear Pending Bit 205" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND204 ,Set/Clear Pending Bit 204" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND203 ,Set/Clear Pending Bit 203" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND202 ,Set/Clear Pending Bit 202" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND201 ,Set/Clear Pending Bit 201" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND200 ,Set/Clear Pending Bit 200" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND199 ,Set/Clear Pending Bit 199" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND198 ,Set/Clear Pending Bit 198" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND197 ,Set/Clear Pending Bit 197" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND196 ,Set/Clear Pending Bit 196" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND195 ,Set/Clear Pending Bit 195" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND194 ,Set/Clear Pending Bit 194" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND193 ,Set/Clear Pending Bit 193" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND192 ,Set/Clear Pending Bit 192" "Not pending,Pending" else hgroup.long 0x0218++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR6,Interrupt Set/Clear Pending Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x07) group.long 0x021C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND255 ,Set/Clear Pending Bit 255" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND254 ,Set/Clear Pending Bit 254" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND253 ,Set/Clear Pending Bit 253" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND252 ,Set/Clear Pending Bit 252" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND251 ,Set/Clear Pending Bit 251" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND250 ,Set/Clear Pending Bit 250" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND249 ,Set/Clear Pending Bit 249" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND248 ,Set/Clear Pending Bit 248" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND247 ,Set/Clear Pending Bit 247" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND246 ,Set/Clear Pending Bit 246" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND245 ,Set/Clear Pending Bit 245" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND244 ,Set/Clear Pending Bit 244" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND243 ,Set/Clear Pending Bit 243" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND242 ,Set/Clear Pending Bit 242" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND241 ,Set/Clear Pending Bit 241" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND240 ,Set/Clear Pending Bit 240" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND239 ,Set/Clear Pending Bit 239" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND238 ,Set/Clear Pending Bit 238" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND237 ,Set/Clear Pending Bit 237" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND236 ,Set/Clear Pending Bit 236" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND235 ,Set/Clear Pending Bit 235" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND234 ,Set/Clear Pending Bit 234" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND233 ,Set/Clear Pending Bit 233" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND232 ,Set/Clear Pending Bit 232" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND231 ,Set/Clear Pending Bit 231" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND230 ,Set/Clear Pending Bit 230" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND229 ,Set/Clear Pending Bit 229" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND228 ,Set/Clear Pending Bit 228" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND227 ,Set/Clear Pending Bit 227" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND226 ,Set/Clear Pending Bit 226" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND225 ,Set/Clear Pending Bit 225" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND224 ,Set/Clear Pending Bit 224" "Not pending,Pending" else hgroup.long 0x021C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR7,Interrupt Set/Clear Pending Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x08) group.long 0x0220++0x03 line.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND287 ,Set/Clear Pending Bit 287" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND286 ,Set/Clear Pending Bit 286" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND285 ,Set/Clear Pending Bit 285" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND284 ,Set/Clear Pending Bit 284" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND283 ,Set/Clear Pending Bit 283" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND282 ,Set/Clear Pending Bit 282" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND281 ,Set/Clear Pending Bit 281" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND280 ,Set/Clear Pending Bit 280" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND279 ,Set/Clear Pending Bit 279" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND278 ,Set/Clear Pending Bit 278" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND277 ,Set/Clear Pending Bit 277" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND276 ,Set/Clear Pending Bit 276" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND275 ,Set/Clear Pending Bit 275" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND274 ,Set/Clear Pending Bit 274" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND273 ,Set/Clear Pending Bit 273" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND272 ,Set/Clear Pending Bit 272" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND271 ,Set/Clear Pending Bit 271" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND270 ,Set/Clear Pending Bit 270" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND269 ,Set/Clear Pending Bit 269" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND268 ,Set/Clear Pending Bit 268" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND267 ,Set/Clear Pending Bit 267" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND266 ,Set/Clear Pending Bit 266" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND265 ,Set/Clear Pending Bit 265" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND264 ,Set/Clear Pending Bit 264" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND263 ,Set/Clear Pending Bit 263" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND262 ,Set/Clear Pending Bit 262" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND261 ,Set/Clear Pending Bit 261" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND260 ,Set/Clear Pending Bit 260" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND259 ,Set/Clear Pending Bit 259" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND258 ,Set/Clear Pending Bit 258" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND257 ,Set/Clear Pending Bit 257" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND256 ,Set/Clear Pending Bit 256" "Not pending,Pending" else hgroup.long 0x0220++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR8,Interrupt Set/Clear Pending Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x09) group.long 0x0224++0x03 line.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND319 ,Set/Clear Pending Bit 319" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND318 ,Set/Clear Pending Bit 318" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND317 ,Set/Clear Pending Bit 317" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND316 ,Set/Clear Pending Bit 316" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND315 ,Set/Clear Pending Bit 315" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND314 ,Set/Clear Pending Bit 314" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND313 ,Set/Clear Pending Bit 313" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND312 ,Set/Clear Pending Bit 312" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND311 ,Set/Clear Pending Bit 311" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND310 ,Set/Clear Pending Bit 310" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND309 ,Set/Clear Pending Bit 309" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND308 ,Set/Clear Pending Bit 308" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND307 ,Set/Clear Pending Bit 307" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND306 ,Set/Clear Pending Bit 306" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND305 ,Set/Clear Pending Bit 305" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND304 ,Set/Clear Pending Bit 304" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND303 ,Set/Clear Pending Bit 303" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND302 ,Set/Clear Pending Bit 302" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND301 ,Set/Clear Pending Bit 301" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND300 ,Set/Clear Pending Bit 300" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND299 ,Set/Clear Pending Bit 299" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND298 ,Set/Clear Pending Bit 298" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND297 ,Set/Clear Pending Bit 297" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND296 ,Set/Clear Pending Bit 296" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND295 ,Set/Clear Pending Bit 295" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND294 ,Set/Clear Pending Bit 294" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND293 ,Set/Clear Pending Bit 293" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND292 ,Set/Clear Pending Bit 292" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND291 ,Set/Clear Pending Bit 291" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND290 ,Set/Clear Pending Bit 290" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND289 ,Set/Clear Pending Bit 289" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND288 ,Set/Clear Pending Bit 288" "Not pending,Pending" else hgroup.long 0x0224++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR9,Interrupt Set/Clear Pending Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0A) group.long 0x0228++0x03 line.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND351 ,Set/Clear Pending Bit 351" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND350 ,Set/Clear Pending Bit 350" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND349 ,Set/Clear Pending Bit 349" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND348 ,Set/Clear Pending Bit 348" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND347 ,Set/Clear Pending Bit 347" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND346 ,Set/Clear Pending Bit 346" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND345 ,Set/Clear Pending Bit 345" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND344 ,Set/Clear Pending Bit 344" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND343 ,Set/Clear Pending Bit 343" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND342 ,Set/Clear Pending Bit 342" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND341 ,Set/Clear Pending Bit 341" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND340 ,Set/Clear Pending Bit 340" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND339 ,Set/Clear Pending Bit 339" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND338 ,Set/Clear Pending Bit 338" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND337 ,Set/Clear Pending Bit 337" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND336 ,Set/Clear Pending Bit 336" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND335 ,Set/Clear Pending Bit 335" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND334 ,Set/Clear Pending Bit 334" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND333 ,Set/Clear Pending Bit 333" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND332 ,Set/Clear Pending Bit 332" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND331 ,Set/Clear Pending Bit 331" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND330 ,Set/Clear Pending Bit 330" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND329 ,Set/Clear Pending Bit 329" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND328 ,Set/Clear Pending Bit 328" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND327 ,Set/Clear Pending Bit 327" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND326 ,Set/Clear Pending Bit 326" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND325 ,Set/Clear Pending Bit 325" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND324 ,Set/Clear Pending Bit 324" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND323 ,Set/Clear Pending Bit 323" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND322 ,Set/Clear Pending Bit 322" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND321 ,Set/Clear Pending Bit 321" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND320 ,Set/Clear Pending Bit 320" "Not pending,Pending" else hgroup.long 0x0228++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR10,Interrupt Set/Clear Pending Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0B) group.long 0x022C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND383 ,Set/Clear Pending Bit 383" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND382 ,Set/Clear Pending Bit 382" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND381 ,Set/Clear Pending Bit 381" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND380 ,Set/Clear Pending Bit 380" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND379 ,Set/Clear Pending Bit 379" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND378 ,Set/Clear Pending Bit 378" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND377 ,Set/Clear Pending Bit 377" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND376 ,Set/Clear Pending Bit 376" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND375 ,Set/Clear Pending Bit 375" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND374 ,Set/Clear Pending Bit 374" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND373 ,Set/Clear Pending Bit 373" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND372 ,Set/Clear Pending Bit 372" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND371 ,Set/Clear Pending Bit 371" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND370 ,Set/Clear Pending Bit 370" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND369 ,Set/Clear Pending Bit 369" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND368 ,Set/Clear Pending Bit 368" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND367 ,Set/Clear Pending Bit 367" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND366 ,Set/Clear Pending Bit 366" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND365 ,Set/Clear Pending Bit 365" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND364 ,Set/Clear Pending Bit 364" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND363 ,Set/Clear Pending Bit 363" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND362 ,Set/Clear Pending Bit 362" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND361 ,Set/Clear Pending Bit 361" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND360 ,Set/Clear Pending Bit 360" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND359 ,Set/Clear Pending Bit 359" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND358 ,Set/Clear Pending Bit 358" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND357 ,Set/Clear Pending Bit 357" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND356 ,Set/Clear Pending Bit 356" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND355 ,Set/Clear Pending Bit 355" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND354 ,Set/Clear Pending Bit 354" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND353 ,Set/Clear Pending Bit 353" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND352 ,Set/Clear Pending Bit 352" "Not pending,Pending" else hgroup.long 0x022C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR11,Interrupt Set/Clear Pending Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0C) group.long 0x0230++0x03 line.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND415 ,Set/Clear Pending Bit 415" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND414 ,Set/Clear Pending Bit 414" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND413 ,Set/Clear Pending Bit 413" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND412 ,Set/Clear Pending Bit 412" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND411 ,Set/Clear Pending Bit 411" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND410 ,Set/Clear Pending Bit 410" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND409 ,Set/Clear Pending Bit 409" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND408 ,Set/Clear Pending Bit 408" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND407 ,Set/Clear Pending Bit 407" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND406 ,Set/Clear Pending Bit 406" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND405 ,Set/Clear Pending Bit 405" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND404 ,Set/Clear Pending Bit 404" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND403 ,Set/Clear Pending Bit 403" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND402 ,Set/Clear Pending Bit 402" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND401 ,Set/Clear Pending Bit 401" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND400 ,Set/Clear Pending Bit 400" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND399 ,Set/Clear Pending Bit 399" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND398 ,Set/Clear Pending Bit 398" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND397 ,Set/Clear Pending Bit 397" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND396 ,Set/Clear Pending Bit 396" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND395 ,Set/Clear Pending Bit 395" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND394 ,Set/Clear Pending Bit 394" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND393 ,Set/Clear Pending Bit 393" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND392 ,Set/Clear Pending Bit 392" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND391 ,Set/Clear Pending Bit 391" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND390 ,Set/Clear Pending Bit 390" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND389 ,Set/Clear Pending Bit 389" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND388 ,Set/Clear Pending Bit 388" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND387 ,Set/Clear Pending Bit 387" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND386 ,Set/Clear Pending Bit 386" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND385 ,Set/Clear Pending Bit 385" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND384 ,Set/Clear Pending Bit 384" "Not pending,Pending" else hgroup.long 0x0230++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR12,Interrupt Set/Clear Pending Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0D) group.long 0x0234++0x03 line.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND447 ,Set/Clear Pending Bit 447" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND446 ,Set/Clear Pending Bit 446" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND445 ,Set/Clear Pending Bit 445" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND444 ,Set/Clear Pending Bit 444" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND443 ,Set/Clear Pending Bit 443" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND442 ,Set/Clear Pending Bit 442" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND441 ,Set/Clear Pending Bit 441" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND440 ,Set/Clear Pending Bit 440" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND439 ,Set/Clear Pending Bit 439" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND438 ,Set/Clear Pending Bit 438" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND437 ,Set/Clear Pending Bit 437" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND436 ,Set/Clear Pending Bit 436" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND435 ,Set/Clear Pending Bit 435" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND434 ,Set/Clear Pending Bit 434" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND433 ,Set/Clear Pending Bit 433" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND432 ,Set/Clear Pending Bit 432" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND431 ,Set/Clear Pending Bit 431" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND430 ,Set/Clear Pending Bit 430" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND429 ,Set/Clear Pending Bit 429" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND428 ,Set/Clear Pending Bit 428" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND427 ,Set/Clear Pending Bit 427" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND426 ,Set/Clear Pending Bit 426" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND425 ,Set/Clear Pending Bit 425" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND424 ,Set/Clear Pending Bit 424" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND423 ,Set/Clear Pending Bit 423" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND422 ,Set/Clear Pending Bit 422" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND421 ,Set/Clear Pending Bit 421" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND420 ,Set/Clear Pending Bit 420" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND419 ,Set/Clear Pending Bit 419" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND418 ,Set/Clear Pending Bit 418" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND417 ,Set/Clear Pending Bit 417" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND416 ,Set/Clear Pending Bit 416" "Not pending,Pending" else hgroup.long 0x0234++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR13,Interrupt Set/Clear Pending Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0E) group.long 0x0238++0x03 line.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND479 ,Set/Clear Pending Bit 479" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND478 ,Set/Clear Pending Bit 478" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND477 ,Set/Clear Pending Bit 477" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND476 ,Set/Clear Pending Bit 476" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND475 ,Set/Clear Pending Bit 475" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND474 ,Set/Clear Pending Bit 474" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND473 ,Set/Clear Pending Bit 473" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND472 ,Set/Clear Pending Bit 472" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND471 ,Set/Clear Pending Bit 471" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND470 ,Set/Clear Pending Bit 470" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND469 ,Set/Clear Pending Bit 469" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND468 ,Set/Clear Pending Bit 468" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND467 ,Set/Clear Pending Bit 467" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND466 ,Set/Clear Pending Bit 466" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND465 ,Set/Clear Pending Bit 465" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND464 ,Set/Clear Pending Bit 464" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND463 ,Set/Clear Pending Bit 463" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND462 ,Set/Clear Pending Bit 462" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND461 ,Set/Clear Pending Bit 461" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND460 ,Set/Clear Pending Bit 460" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND459 ,Set/Clear Pending Bit 459" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND458 ,Set/Clear Pending Bit 458" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND457 ,Set/Clear Pending Bit 457" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND456 ,Set/Clear Pending Bit 456" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND455 ,Set/Clear Pending Bit 455" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND454 ,Set/Clear Pending Bit 454" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND453 ,Set/Clear Pending Bit 453" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND452 ,Set/Clear Pending Bit 452" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND451 ,Set/Clear Pending Bit 451" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND450 ,Set/Clear Pending Bit 450" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND449 ,Set/Clear Pending Bit 449" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND448 ,Set/Clear Pending Bit 448" "Not pending,Pending" else hgroup.long 0x0238++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR14,Interrupt Set/Clear Pending Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0F) group.long 0x023C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND511 ,Set/Clear Pending Bit 511" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND510 ,Set/Clear Pending Bit 510" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND509 ,Set/Clear Pending Bit 509" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND508 ,Set/Clear Pending Bit 508" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND507 ,Set/Clear Pending Bit 507" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND506 ,Set/Clear Pending Bit 506" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND505 ,Set/Clear Pending Bit 505" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND504 ,Set/Clear Pending Bit 504" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND503 ,Set/Clear Pending Bit 503" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND502 ,Set/Clear Pending Bit 502" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND501 ,Set/Clear Pending Bit 501" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND500 ,Set/Clear Pending Bit 500" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND499 ,Set/Clear Pending Bit 499" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND498 ,Set/Clear Pending Bit 498" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND497 ,Set/Clear Pending Bit 497" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND496 ,Set/Clear Pending Bit 496" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND495 ,Set/Clear Pending Bit 495" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND494 ,Set/Clear Pending Bit 494" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND493 ,Set/Clear Pending Bit 493" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND492 ,Set/Clear Pending Bit 492" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND491 ,Set/Clear Pending Bit 491" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND490 ,Set/Clear Pending Bit 490" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND489 ,Set/Clear Pending Bit 489" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND488 ,Set/Clear Pending Bit 488" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND487 ,Set/Clear Pending Bit 487" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND486 ,Set/Clear Pending Bit 486" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND485 ,Set/Clear Pending Bit 485" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND484 ,Set/Clear Pending Bit 484" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND483 ,Set/Clear Pending Bit 483" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND482 ,Set/Clear Pending Bit 482" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND481 ,Set/Clear Pending Bit 481" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND480 ,Set/Clear Pending Bit 480" "Not pending,Pending" else hgroup.long 0x023C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR15,Interrupt Set/Clear Pending Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10) group.long 0x0240++0x03 line.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND543 ,Set/Clear Pending Bit 543" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND542 ,Set/Clear Pending Bit 542" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND541 ,Set/Clear Pending Bit 541" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND540 ,Set/Clear Pending Bit 540" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND539 ,Set/Clear Pending Bit 539" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND538 ,Set/Clear Pending Bit 538" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND537 ,Set/Clear Pending Bit 537" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND536 ,Set/Clear Pending Bit 536" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND535 ,Set/Clear Pending Bit 535" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND534 ,Set/Clear Pending Bit 534" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND533 ,Set/Clear Pending Bit 533" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND532 ,Set/Clear Pending Bit 532" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND531 ,Set/Clear Pending Bit 531" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND530 ,Set/Clear Pending Bit 530" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND529 ,Set/Clear Pending Bit 529" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND528 ,Set/Clear Pending Bit 528" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND527 ,Set/Clear Pending Bit 527" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND526 ,Set/Clear Pending Bit 526" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND525 ,Set/Clear Pending Bit 525" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND524 ,Set/Clear Pending Bit 524" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND523 ,Set/Clear Pending Bit 523" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND522 ,Set/Clear Pending Bit 522" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND521 ,Set/Clear Pending Bit 521" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND520 ,Set/Clear Pending Bit 520" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND519 ,Set/Clear Pending Bit 519" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND518 ,Set/Clear Pending Bit 518" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND517 ,Set/Clear Pending Bit 517" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND516 ,Set/Clear Pending Bit 516" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND515 ,Set/Clear Pending Bit 515" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND514 ,Set/Clear Pending Bit 514" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND513 ,Set/Clear Pending Bit 513" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND512 ,Set/Clear Pending Bit 512" "Not pending,Pending" else hgroup.long 0x0240++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR16,Interrupt Set/Clear Pending Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11) group.long 0x0244++0x03 line.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND575 ,Set/Clear Pending Bit 575" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND574 ,Set/Clear Pending Bit 574" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND573 ,Set/Clear Pending Bit 573" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND572 ,Set/Clear Pending Bit 572" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND571 ,Set/Clear Pending Bit 571" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND570 ,Set/Clear Pending Bit 570" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND569 ,Set/Clear Pending Bit 569" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND568 ,Set/Clear Pending Bit 568" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND567 ,Set/Clear Pending Bit 567" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND566 ,Set/Clear Pending Bit 566" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND565 ,Set/Clear Pending Bit 565" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND564 ,Set/Clear Pending Bit 564" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND563 ,Set/Clear Pending Bit 563" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND562 ,Set/Clear Pending Bit 562" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND561 ,Set/Clear Pending Bit 561" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND560 ,Set/Clear Pending Bit 560" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND559 ,Set/Clear Pending Bit 559" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND558 ,Set/Clear Pending Bit 558" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND557 ,Set/Clear Pending Bit 557" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND556 ,Set/Clear Pending Bit 556" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND555 ,Set/Clear Pending Bit 555" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND554 ,Set/Clear Pending Bit 554" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND553 ,Set/Clear Pending Bit 553" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND552 ,Set/Clear Pending Bit 552" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND551 ,Set/Clear Pending Bit 551" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND550 ,Set/Clear Pending Bit 550" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND549 ,Set/Clear Pending Bit 549" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND548 ,Set/Clear Pending Bit 548" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND547 ,Set/Clear Pending Bit 547" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND546 ,Set/Clear Pending Bit 546" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND545 ,Set/Clear Pending Bit 545" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND544 ,Set/Clear Pending Bit 544" "Not pending,Pending" else hgroup.long 0x0244++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR17,Interrupt Set/Clear Pending Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12) group.long 0x0248++0x03 line.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND607 ,Set/Clear Pending Bit 607" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND606 ,Set/Clear Pending Bit 606" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND605 ,Set/Clear Pending Bit 605" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND604 ,Set/Clear Pending Bit 604" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND603 ,Set/Clear Pending Bit 603" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND602 ,Set/Clear Pending Bit 602" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND601 ,Set/Clear Pending Bit 601" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND600 ,Set/Clear Pending Bit 600" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND599 ,Set/Clear Pending Bit 599" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND598 ,Set/Clear Pending Bit 598" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND597 ,Set/Clear Pending Bit 597" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND596 ,Set/Clear Pending Bit 596" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND595 ,Set/Clear Pending Bit 595" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND594 ,Set/Clear Pending Bit 594" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND593 ,Set/Clear Pending Bit 593" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND592 ,Set/Clear Pending Bit 592" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND591 ,Set/Clear Pending Bit 591" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND590 ,Set/Clear Pending Bit 590" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND589 ,Set/Clear Pending Bit 589" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND588 ,Set/Clear Pending Bit 588" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND587 ,Set/Clear Pending Bit 587" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND586 ,Set/Clear Pending Bit 586" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND585 ,Set/Clear Pending Bit 585" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND584 ,Set/Clear Pending Bit 584" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND583 ,Set/Clear Pending Bit 583" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND582 ,Set/Clear Pending Bit 582" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND581 ,Set/Clear Pending Bit 581" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND580 ,Set/Clear Pending Bit 580" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND579 ,Set/Clear Pending Bit 579" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND578 ,Set/Clear Pending Bit 578" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND577 ,Set/Clear Pending Bit 577" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND576 ,Set/Clear Pending Bit 576" "Not pending,Pending" else hgroup.long 0x0248++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR18,Interrupt Set/Clear Pending Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13) group.long 0x024C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND639 ,Set/Clear Pending Bit 639" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND638 ,Set/Clear Pending Bit 638" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND637 ,Set/Clear Pending Bit 637" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND636 ,Set/Clear Pending Bit 636" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND635 ,Set/Clear Pending Bit 635" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND634 ,Set/Clear Pending Bit 634" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND633 ,Set/Clear Pending Bit 633" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND632 ,Set/Clear Pending Bit 632" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND631 ,Set/Clear Pending Bit 631" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND630 ,Set/Clear Pending Bit 630" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND629 ,Set/Clear Pending Bit 629" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND628 ,Set/Clear Pending Bit 628" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND627 ,Set/Clear Pending Bit 627" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND626 ,Set/Clear Pending Bit 626" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND625 ,Set/Clear Pending Bit 625" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND624 ,Set/Clear Pending Bit 624" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND623 ,Set/Clear Pending Bit 623" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND622 ,Set/Clear Pending Bit 622" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND621 ,Set/Clear Pending Bit 621" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND620 ,Set/Clear Pending Bit 620" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND619 ,Set/Clear Pending Bit 619" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND618 ,Set/Clear Pending Bit 618" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND617 ,Set/Clear Pending Bit 617" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND616 ,Set/Clear Pending Bit 616" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND615 ,Set/Clear Pending Bit 615" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND614 ,Set/Clear Pending Bit 614" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND613 ,Set/Clear Pending Bit 613" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND612 ,Set/Clear Pending Bit 612" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND611 ,Set/Clear Pending Bit 611" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND610 ,Set/Clear Pending Bit 610" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND609 ,Set/Clear Pending Bit 609" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND608 ,Set/Clear Pending Bit 608" "Not pending,Pending" else hgroup.long 0x024C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR19,Interrupt Set/Clear Pending Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14) group.long 0x0250++0x03 line.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND671 ,Set/Clear Pending Bit 671" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND670 ,Set/Clear Pending Bit 670" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND669 ,Set/Clear Pending Bit 669" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND668 ,Set/Clear Pending Bit 668" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND667 ,Set/Clear Pending Bit 667" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND666 ,Set/Clear Pending Bit 666" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND665 ,Set/Clear Pending Bit 665" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND664 ,Set/Clear Pending Bit 664" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND663 ,Set/Clear Pending Bit 663" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND662 ,Set/Clear Pending Bit 662" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND661 ,Set/Clear Pending Bit 661" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND660 ,Set/Clear Pending Bit 660" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND659 ,Set/Clear Pending Bit 659" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND658 ,Set/Clear Pending Bit 658" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND657 ,Set/Clear Pending Bit 657" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND656 ,Set/Clear Pending Bit 656" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND655 ,Set/Clear Pending Bit 655" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND654 ,Set/Clear Pending Bit 654" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND653 ,Set/Clear Pending Bit 653" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND652 ,Set/Clear Pending Bit 652" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND651 ,Set/Clear Pending Bit 651" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND650 ,Set/Clear Pending Bit 650" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND649 ,Set/Clear Pending Bit 649" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND648 ,Set/Clear Pending Bit 648" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND647 ,Set/Clear Pending Bit 647" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND646 ,Set/Clear Pending Bit 646" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND645 ,Set/Clear Pending Bit 645" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND644 ,Set/Clear Pending Bit 644" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND643 ,Set/Clear Pending Bit 643" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND642 ,Set/Clear Pending Bit 642" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND641 ,Set/Clear Pending Bit 641" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND640 ,Set/Clear Pending Bit 640" "Not pending,Pending" else hgroup.long 0x0250++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR20,Interrupt Set/Clear Pending Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15) group.long 0x0254++0x03 line.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND703 ,Set/Clear Pending Bit 703" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND702 ,Set/Clear Pending Bit 702" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND701 ,Set/Clear Pending Bit 701" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND700 ,Set/Clear Pending Bit 700" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND699 ,Set/Clear Pending Bit 699" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND698 ,Set/Clear Pending Bit 698" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND697 ,Set/Clear Pending Bit 697" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND696 ,Set/Clear Pending Bit 696" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND695 ,Set/Clear Pending Bit 695" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND694 ,Set/Clear Pending Bit 694" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND693 ,Set/Clear Pending Bit 693" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND692 ,Set/Clear Pending Bit 692" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND691 ,Set/Clear Pending Bit 691" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND690 ,Set/Clear Pending Bit 690" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND689 ,Set/Clear Pending Bit 689" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND688 ,Set/Clear Pending Bit 688" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND687 ,Set/Clear Pending Bit 687" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND686 ,Set/Clear Pending Bit 686" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND685 ,Set/Clear Pending Bit 685" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND684 ,Set/Clear Pending Bit 684" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND683 ,Set/Clear Pending Bit 683" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND682 ,Set/Clear Pending Bit 682" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND681 ,Set/Clear Pending Bit 681" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND680 ,Set/Clear Pending Bit 680" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND679 ,Set/Clear Pending Bit 679" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND678 ,Set/Clear Pending Bit 678" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND677 ,Set/Clear Pending Bit 677" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND676 ,Set/Clear Pending Bit 676" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND675 ,Set/Clear Pending Bit 675" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND674 ,Set/Clear Pending Bit 674" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND673 ,Set/Clear Pending Bit 673" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND672 ,Set/Clear Pending Bit 672" "Not pending,Pending" else hgroup.long 0x0254++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR21,Interrupt Set/Clear Pending Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16) group.long 0x0258++0x03 line.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND735 ,Set/Clear Pending Bit 735" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND734 ,Set/Clear Pending Bit 734" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND733 ,Set/Clear Pending Bit 733" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND732 ,Set/Clear Pending Bit 732" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND731 ,Set/Clear Pending Bit 731" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND730 ,Set/Clear Pending Bit 730" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND729 ,Set/Clear Pending Bit 729" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND728 ,Set/Clear Pending Bit 728" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND727 ,Set/Clear Pending Bit 727" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND726 ,Set/Clear Pending Bit 726" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND725 ,Set/Clear Pending Bit 725" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND724 ,Set/Clear Pending Bit 724" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND723 ,Set/Clear Pending Bit 723" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND722 ,Set/Clear Pending Bit 722" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND721 ,Set/Clear Pending Bit 721" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND720 ,Set/Clear Pending Bit 720" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND719 ,Set/Clear Pending Bit 719" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND718 ,Set/Clear Pending Bit 718" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND717 ,Set/Clear Pending Bit 717" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND716 ,Set/Clear Pending Bit 716" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND715 ,Set/Clear Pending Bit 715" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND714 ,Set/Clear Pending Bit 714" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND713 ,Set/Clear Pending Bit 713" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND712 ,Set/Clear Pending Bit 712" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND711 ,Set/Clear Pending Bit 711" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND710 ,Set/Clear Pending Bit 710" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND709 ,Set/Clear Pending Bit 709" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND708 ,Set/Clear Pending Bit 708" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND707 ,Set/Clear Pending Bit 707" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND706 ,Set/Clear Pending Bit 706" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND705 ,Set/Clear Pending Bit 705" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND704 ,Set/Clear Pending Bit 704" "Not pending,Pending" else hgroup.long 0x0258++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR22,Interrupt Set/Clear Pending Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17) group.long 0x025C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND767 ,Set/Clear Pending Bit 767" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND766 ,Set/Clear Pending Bit 766" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND765 ,Set/Clear Pending Bit 765" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND764 ,Set/Clear Pending Bit 764" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND763 ,Set/Clear Pending Bit 763" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND762 ,Set/Clear Pending Bit 762" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND761 ,Set/Clear Pending Bit 761" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND760 ,Set/Clear Pending Bit 760" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND759 ,Set/Clear Pending Bit 759" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND758 ,Set/Clear Pending Bit 758" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND757 ,Set/Clear Pending Bit 757" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND756 ,Set/Clear Pending Bit 756" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND755 ,Set/Clear Pending Bit 755" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND754 ,Set/Clear Pending Bit 754" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND753 ,Set/Clear Pending Bit 753" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND752 ,Set/Clear Pending Bit 752" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND751 ,Set/Clear Pending Bit 751" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND750 ,Set/Clear Pending Bit 750" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND749 ,Set/Clear Pending Bit 749" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND748 ,Set/Clear Pending Bit 748" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND747 ,Set/Clear Pending Bit 747" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND746 ,Set/Clear Pending Bit 746" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND745 ,Set/Clear Pending Bit 745" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND744 ,Set/Clear Pending Bit 744" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND743 ,Set/Clear Pending Bit 743" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND742 ,Set/Clear Pending Bit 742" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND741 ,Set/Clear Pending Bit 741" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND740 ,Set/Clear Pending Bit 740" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND739 ,Set/Clear Pending Bit 739" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND738 ,Set/Clear Pending Bit 738" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND737 ,Set/Clear Pending Bit 737" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND736 ,Set/Clear Pending Bit 736" "Not pending,Pending" else hgroup.long 0x025C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR23,Interrupt Set/Clear Pending Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18) group.long 0x0260++0x03 line.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND799 ,Set/Clear Pending Bit 799" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND798 ,Set/Clear Pending Bit 798" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND797 ,Set/Clear Pending Bit 797" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND796 ,Set/Clear Pending Bit 796" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND795 ,Set/Clear Pending Bit 795" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND794 ,Set/Clear Pending Bit 794" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND793 ,Set/Clear Pending Bit 793" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND792 ,Set/Clear Pending Bit 792" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND791 ,Set/Clear Pending Bit 791" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND790 ,Set/Clear Pending Bit 790" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND789 ,Set/Clear Pending Bit 789" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND788 ,Set/Clear Pending Bit 788" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND787 ,Set/Clear Pending Bit 787" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND786 ,Set/Clear Pending Bit 786" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND785 ,Set/Clear Pending Bit 785" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND784 ,Set/Clear Pending Bit 784" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND783 ,Set/Clear Pending Bit 783" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND782 ,Set/Clear Pending Bit 782" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND781 ,Set/Clear Pending Bit 781" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND780 ,Set/Clear Pending Bit 780" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND779 ,Set/Clear Pending Bit 779" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND778 ,Set/Clear Pending Bit 778" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND777 ,Set/Clear Pending Bit 777" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND776 ,Set/Clear Pending Bit 776" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND775 ,Set/Clear Pending Bit 775" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND774 ,Set/Clear Pending Bit 774" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND773 ,Set/Clear Pending Bit 773" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND772 ,Set/Clear Pending Bit 772" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND771 ,Set/Clear Pending Bit 771" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND770 ,Set/Clear Pending Bit 770" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND769 ,Set/Clear Pending Bit 769" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND768 ,Set/Clear Pending Bit 768" "Not pending,Pending" else hgroup.long 0x0260++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR24,Interrupt Set/Clear Pending Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19) group.long 0x0264++0x03 line.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND831 ,Set/Clear Pending Bit 831" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND830 ,Set/Clear Pending Bit 830" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND829 ,Set/Clear Pending Bit 829" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND828 ,Set/Clear Pending Bit 828" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND827 ,Set/Clear Pending Bit 827" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND826 ,Set/Clear Pending Bit 826" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND825 ,Set/Clear Pending Bit 825" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND824 ,Set/Clear Pending Bit 824" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND823 ,Set/Clear Pending Bit 823" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND822 ,Set/Clear Pending Bit 822" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND821 ,Set/Clear Pending Bit 821" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND820 ,Set/Clear Pending Bit 820" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND819 ,Set/Clear Pending Bit 819" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND818 ,Set/Clear Pending Bit 818" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND817 ,Set/Clear Pending Bit 817" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND816 ,Set/Clear Pending Bit 816" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND815 ,Set/Clear Pending Bit 815" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND814 ,Set/Clear Pending Bit 814" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND813 ,Set/Clear Pending Bit 813" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND812 ,Set/Clear Pending Bit 812" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND811 ,Set/Clear Pending Bit 811" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND810 ,Set/Clear Pending Bit 810" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND809 ,Set/Clear Pending Bit 809" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND808 ,Set/Clear Pending Bit 808" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND807 ,Set/Clear Pending Bit 807" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND806 ,Set/Clear Pending Bit 806" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND805 ,Set/Clear Pending Bit 805" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND804 ,Set/Clear Pending Bit 804" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND803 ,Set/Clear Pending Bit 803" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND802 ,Set/Clear Pending Bit 802" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND801 ,Set/Clear Pending Bit 801" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND800 ,Set/Clear Pending Bit 800" "Not pending,Pending" else hgroup.long 0x0264++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR25,Interrupt Set/Clear Pending Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A) group.long 0x0268++0x03 line.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND863 ,Set/Clear Pending Bit 863" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND862 ,Set/Clear Pending Bit 862" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND861 ,Set/Clear Pending Bit 861" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND860 ,Set/Clear Pending Bit 860" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND859 ,Set/Clear Pending Bit 859" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND858 ,Set/Clear Pending Bit 858" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND857 ,Set/Clear Pending Bit 857" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND856 ,Set/Clear Pending Bit 856" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND855 ,Set/Clear Pending Bit 855" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND854 ,Set/Clear Pending Bit 854" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND853 ,Set/Clear Pending Bit 853" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND852 ,Set/Clear Pending Bit 852" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND851 ,Set/Clear Pending Bit 851" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND850 ,Set/Clear Pending Bit 850" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND849 ,Set/Clear Pending Bit 849" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND848 ,Set/Clear Pending Bit 848" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND847 ,Set/Clear Pending Bit 847" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND846 ,Set/Clear Pending Bit 846" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND845 ,Set/Clear Pending Bit 845" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND844 ,Set/Clear Pending Bit 844" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND843 ,Set/Clear Pending Bit 843" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND842 ,Set/Clear Pending Bit 842" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND841 ,Set/Clear Pending Bit 841" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND840 ,Set/Clear Pending Bit 840" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND839 ,Set/Clear Pending Bit 839" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND838 ,Set/Clear Pending Bit 838" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND837 ,Set/Clear Pending Bit 837" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND836 ,Set/Clear Pending Bit 836" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND835 ,Set/Clear Pending Bit 835" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND834 ,Set/Clear Pending Bit 834" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND833 ,Set/Clear Pending Bit 833" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND832 ,Set/Clear Pending Bit 832" "Not pending,Pending" else hgroup.long 0x0268++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR26,Interrupt Set/Clear Pending Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B) group.long 0x026C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND895 ,Set/Clear Pending Bit 895" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND894 ,Set/Clear Pending Bit 894" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND893 ,Set/Clear Pending Bit 893" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND892 ,Set/Clear Pending Bit 892" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND891 ,Set/Clear Pending Bit 891" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND890 ,Set/Clear Pending Bit 890" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND889 ,Set/Clear Pending Bit 889" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND888 ,Set/Clear Pending Bit 888" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND887 ,Set/Clear Pending Bit 887" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND886 ,Set/Clear Pending Bit 886" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND885 ,Set/Clear Pending Bit 885" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND884 ,Set/Clear Pending Bit 884" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND883 ,Set/Clear Pending Bit 883" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND882 ,Set/Clear Pending Bit 882" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND881 ,Set/Clear Pending Bit 881" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND880 ,Set/Clear Pending Bit 880" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND879 ,Set/Clear Pending Bit 879" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND878 ,Set/Clear Pending Bit 878" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND877 ,Set/Clear Pending Bit 877" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND876 ,Set/Clear Pending Bit 876" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND875 ,Set/Clear Pending Bit 875" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND874 ,Set/Clear Pending Bit 874" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND873 ,Set/Clear Pending Bit 873" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND872 ,Set/Clear Pending Bit 872" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND871 ,Set/Clear Pending Bit 871" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND870 ,Set/Clear Pending Bit 870" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND869 ,Set/Clear Pending Bit 869" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND868 ,Set/Clear Pending Bit 868" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND867 ,Set/Clear Pending Bit 867" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND866 ,Set/Clear Pending Bit 866" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND865 ,Set/Clear Pending Bit 865" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND864 ,Set/Clear Pending Bit 864" "Not pending,Pending" else hgroup.long 0x026C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR27,Interrupt Set/Clear Pending Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C) group.long 0x0270++0x03 line.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND927 ,Set/Clear Pending Bit 927" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND926 ,Set/Clear Pending Bit 926" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND925 ,Set/Clear Pending Bit 925" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND924 ,Set/Clear Pending Bit 924" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND923 ,Set/Clear Pending Bit 923" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND922 ,Set/Clear Pending Bit 922" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND921 ,Set/Clear Pending Bit 921" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND920 ,Set/Clear Pending Bit 920" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND919 ,Set/Clear Pending Bit 919" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND918 ,Set/Clear Pending Bit 918" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND917 ,Set/Clear Pending Bit 917" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND916 ,Set/Clear Pending Bit 916" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND915 ,Set/Clear Pending Bit 915" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND914 ,Set/Clear Pending Bit 914" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND913 ,Set/Clear Pending Bit 913" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND912 ,Set/Clear Pending Bit 912" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND911 ,Set/Clear Pending Bit 911" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND910 ,Set/Clear Pending Bit 910" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND909 ,Set/Clear Pending Bit 909" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND908 ,Set/Clear Pending Bit 908" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND907 ,Set/Clear Pending Bit 907" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND906 ,Set/Clear Pending Bit 906" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND905 ,Set/Clear Pending Bit 905" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND904 ,Set/Clear Pending Bit 904" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND903 ,Set/Clear Pending Bit 903" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND902 ,Set/Clear Pending Bit 902" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND901 ,Set/Clear Pending Bit 901" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND900 ,Set/Clear Pending Bit 900" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND899 ,Set/Clear Pending Bit 899" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND898 ,Set/Clear Pending Bit 898" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND897 ,Set/Clear Pending Bit 897" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND896 ,Set/Clear Pending Bit 896" "Not pending,Pending" else hgroup.long 0x0270++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR28,Interrupt Set/Clear Pending Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D) group.long 0x0274++0x03 line.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND959 ,Set/Clear Pending Bit 959" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND958 ,Set/Clear Pending Bit 958" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND957 ,Set/Clear Pending Bit 957" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND956 ,Set/Clear Pending Bit 956" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND955 ,Set/Clear Pending Bit 955" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND954 ,Set/Clear Pending Bit 954" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND953 ,Set/Clear Pending Bit 953" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND952 ,Set/Clear Pending Bit 952" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND951 ,Set/Clear Pending Bit 951" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND950 ,Set/Clear Pending Bit 950" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND949 ,Set/Clear Pending Bit 949" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND948 ,Set/Clear Pending Bit 948" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND947 ,Set/Clear Pending Bit 947" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND946 ,Set/Clear Pending Bit 946" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND945 ,Set/Clear Pending Bit 945" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND944 ,Set/Clear Pending Bit 944" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND943 ,Set/Clear Pending Bit 943" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND942 ,Set/Clear Pending Bit 942" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND941 ,Set/Clear Pending Bit 941" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND940 ,Set/Clear Pending Bit 940" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND939 ,Set/Clear Pending Bit 939" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND938 ,Set/Clear Pending Bit 938" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND937 ,Set/Clear Pending Bit 937" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND936 ,Set/Clear Pending Bit 936" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND935 ,Set/Clear Pending Bit 935" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND934 ,Set/Clear Pending Bit 934" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND933 ,Set/Clear Pending Bit 933" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND932 ,Set/Clear Pending Bit 932" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND931 ,Set/Clear Pending Bit 931" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND930 ,Set/Clear Pending Bit 930" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND929 ,Set/Clear Pending Bit 929" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND928 ,Set/Clear Pending Bit 928" "Not pending,Pending" else hgroup.long 0x0274++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR29,Interrupt Set/Clear Pending Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E) group.long 0x0278++0x03 line.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30" setclrfld.long 0x00 31. 0x00 31. 0x80 31. " SET/CLRPEND991 ,Set/Clear Pending Bit 991" "Not pending,Pending" setclrfld.long 0x00 30. 0x00 30. 0x80 30. " SET/CLRPEND990 ,Set/Clear Pending Bit 990" "Not pending,Pending" setclrfld.long 0x00 29. 0x00 29. 0x80 29. " SET/CLRPEND989 ,Set/Clear Pending Bit 989" "Not pending,Pending" textline " " setclrfld.long 0x00 28. 0x00 28. 0x80 28. " SET/CLRPEND988 ,Set/Clear Pending Bit 988" "Not pending,Pending" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND987 ,Set/Clear Pending Bit 987" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND986 ,Set/Clear Pending Bit 986" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND985 ,Set/Clear Pending Bit 985" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND984 ,Set/Clear Pending Bit 984" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND983 ,Set/Clear Pending Bit 983" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND982 ,Set/Clear Pending Bit 982" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND981 ,Set/Clear Pending Bit 981" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND980 ,Set/Clear Pending Bit 980" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND979 ,Set/Clear Pending Bit 979" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND978 ,Set/Clear Pending Bit 978" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND977 ,Set/Clear Pending Bit 977" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND976 ,Set/Clear Pending Bit 976" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND975 ,Set/Clear Pending Bit 975" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND974 ,Set/Clear Pending Bit 974" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND973 ,Set/Clear Pending Bit 973" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND972 ,Set/Clear Pending Bit 972" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND971 ,Set/Clear Pending Bit 971" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND970 ,Set/Clear Pending Bit 970" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND969 ,Set/Clear Pending Bit 969" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND968 ,Set/Clear Pending Bit 968" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND967 ,Set/Clear Pending Bit 967" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND966 ,Set/Clear Pending Bit 966" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND965 ,Set/Clear Pending Bit 965" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND964 ,Set/Clear Pending Bit 964" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND963 ,Set/Clear Pending Bit 963" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND962 ,Set/Clear Pending Bit 962" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND961 ,Set/Clear Pending Bit 961" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND960 ,Set/Clear Pending Bit 960" "Not pending,Pending" else hgroup.long 0x0278++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR30,Interrupt Set/Clear Pending Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)==0x1F) group.long 0x027C++0x03 line.long 0x0 "GICD_SET/CLR_PENDR31,Interrupt Set/Clear Pending Register 31" setclrfld.long 0x00 27. 0x00 27. 0x80 27. " SET/CLRPEND1019 ,Set/Clear Pending Bit 1019" "Not pending,Pending" setclrfld.long 0x00 26. 0x00 26. 0x80 26. " SET/CLRPEND1018 ,Set/Clear Pending Bit 1018" "Not pending,Pending" textline " " setclrfld.long 0x00 25. 0x00 25. 0x80 25. " SET/CLRPEND1017 ,Set/Clear Pending Bit 1017" "Not pending,Pending" setclrfld.long 0x00 24. 0x00 24. 0x80 24. " SET/CLRPEND1016 ,Set/Clear Pending Bit 1016" "Not pending,Pending" setclrfld.long 0x00 23. 0x00 23. 0x80 23. " SET/CLRPEND1015 ,Set/Clear Pending Bit 1015" "Not pending,Pending" textline " " setclrfld.long 0x00 22. 0x00 22. 0x80 22. " SET/CLRPEND1014 ,Set/Clear Pending Bit 1014" "Not pending,Pending" setclrfld.long 0x00 21. 0x00 21. 0x80 21. " SET/CLRPEND1013 ,Set/Clear Pending Bit 1013" "Not pending,Pending" setclrfld.long 0x00 20. 0x00 20. 0x80 20. " SET/CLRPEND1012 ,Set/Clear Pending Bit 1012" "Not pending,Pending" textline " " setclrfld.long 0x00 19. 0x00 19. 0x80 19. " SET/CLRPEND1011 ,Set/Clear Pending Bit 1011" "Not pending,Pending" setclrfld.long 0x00 18. 0x00 18. 0x80 18. " SET/CLRPEND1010 ,Set/Clear Pending Bit 1010" "Not pending,Pending" setclrfld.long 0x00 17. 0x00 17. 0x80 17. " SET/CLRPEND1009 ,Set/Clear Pending Bit 1009" "Not pending,Pending" textline " " setclrfld.long 0x00 16. 0x00 16. 0x80 16. " SET/CLRPEND1008 ,Set/Clear Pending Bit 1008" "Not pending,Pending" setclrfld.long 0x00 15. 0x00 15. 0x80 15. " SET/CLRPEND1007 ,Set/Clear Pending Bit 1007" "Not pending,Pending" setclrfld.long 0x00 14. 0x00 14. 0x80 14. " SET/CLRPEND1006 ,Set/Clear Pending Bit 1006" "Not pending,Pending" textline " " setclrfld.long 0x00 13. 0x00 13. 0x80 13. " SET/CLRPEND1005 ,Set/Clear Pending Bit 1005" "Not pending,Pending" setclrfld.long 0x00 12. 0x00 12. 0x80 12. " SET/CLRPEND1004 ,Set/Clear Pending Bit 1004" "Not pending,Pending" setclrfld.long 0x00 11. 0x00 11. 0x80 11. " SET/CLRPEND1003 ,Set/Clear Pending Bit 1003" "Not pending,Pending" textline " " setclrfld.long 0x00 10. 0x00 10. 0x80 10. " SET/CLRPEND1002 ,Set/Clear Pending Bit 1002" "Not pending,Pending" setclrfld.long 0x00 9. 0x00 9. 0x80 9. " SET/CLRPEND1001 ,Set/Clear Pending Bit 1001" "Not pending,Pending" setclrfld.long 0x00 8. 0x00 8. 0x80 8. " SET/CLRPEND1000 ,Set/Clear Pending Bit 1000" "Not pending,Pending" textline " " setclrfld.long 0x00 7. 0x00 7. 0x80 7. " SET/CLRPEND999 ,Set/Clear Pending Bit 999" "Not pending,Pending" setclrfld.long 0x00 6. 0x00 6. 0x80 6. " SET/CLRPEND998 ,Set/Clear Pending Bit 998" "Not pending,Pending" setclrfld.long 0x00 5. 0x00 5. 0x80 5. " SET/CLRPEND997 ,Set/Clear Pending Bit 997" "Not pending,Pending" textline " " setclrfld.long 0x00 4. 0x00 4. 0x80 4. " SET/CLRPEND996 ,Set/Clear Pending Bit 996" "Not pending,Pending" setclrfld.long 0x00 3. 0x00 3. 0x80 3. " SET/CLRPEND995 ,Set/Clear Pending Bit 995" "Not pending,Pending" setclrfld.long 0x00 2. 0x00 2. 0x80 2. " SET/CLRPEND994 ,Set/Clear Pending Bit 994" "Not pending,Pending" textline " " setclrfld.long 0x00 1. 0x00 1. 0x80 1. " SET/CLRPEND993 ,Set/Clear Pending Bit 993" "Not pending,Pending" setclrfld.long 0x00 0. 0x00 0. 0x80 0. " SET/CLRPEND992 ,Set/Clear Pending Bit 992" "Not pending,Pending" else hgroup.long 0x027C++0x03 hide.long 0x0 "GICD_SET/CLR_PENDR31,Interrupt Set/Clear Pending Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 24. tree "Set/Clear Active Registers" rgroup.long 0x0300++0x03 line.long 0x0 "GICD_ICDABR0,Active Status Register 0" bitfld.long 0x00 31. " ASB31 ,Active Status Bit 31" "Not active,Active" bitfld.long 0x00 30. " ASB30 ,Active Status Bit 30" "Not active,Active" bitfld.long 0x00 29. " ASB29 ,Active Status Bit 29" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB28 ,Active Status Bit 28" "Not active,Active" bitfld.long 0x00 27. " ASB27 ,Active Status Bit 27" "Not active,Active" bitfld.long 0x00 26. " ASB26 ,Active Status Bit 26" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB25 ,Active Status Bit 25" "Not active,Active" bitfld.long 0x00 24. " ASB24 ,Active Status Bit 24" "Not active,Active" bitfld.long 0x00 23. " ASB23 ,Active Status Bit 23" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB22 ,Active Status Bit 22" "Not active,Active" bitfld.long 0x00 21. " ASB21 ,Active Status Bit 21" "Not active,Active" bitfld.long 0x00 20. " ASB20 ,Active Status Bit 20" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB19 ,Active Status Bit 19" "Not active,Active" bitfld.long 0x00 18. " ASB18 ,Active Status Bit 18" "Not active,Active" bitfld.long 0x00 17. " ASB17 ,Active Status Bit 17" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB16 ,Active Status Bit 16" "Not active,Active" bitfld.long 0x00 15. " ASB15 ,Active Status Bit 15" "Not active,Active" bitfld.long 0x00 14. " ASB14 ,Active Status Bit 14" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB13 ,Active Status Bit 13" "Not active,Active" bitfld.long 0x00 12. " ASB12 ,Active Status Bit 12" "Not active,Active" bitfld.long 0x00 11. " ASB11 ,Active Status Bit 11" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB10 ,Active Status Bit 10" "Not active,Active" bitfld.long 0x00 9. " ASB9 ,Active Status Bit 9" "Not active,Active" bitfld.long 0x00 8. " ASB8 ,Active Status Bit 8" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB7 ,Active Status Bit 7" "Not active,Active" bitfld.long 0x00 6. " ASB6 ,Active Status Bit 6" "Not active,Active" bitfld.long 0x00 5. " ASB5 ,Active Status Bit 5" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB4 ,Active Status Bit 4" "Not active,Active" bitfld.long 0x00 3. " ASB3 ,Active Status Bit 3" "Not active,Active" bitfld.long 0x00 2. " ASB2 ,Active Status Bit 2" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB1 ,Active Status Bit 1" "Not active,Active" bitfld.long 0x00 0. " ASB0 ,Active Status Bit 0" "Not active,Active" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x01) rgroup.long 0x0304++0x03 line.long 0x0 "GICD_ICDABR1,Active Status Register 1" bitfld.long 0x00 31. " ASB63 ,Active Status Bit 63" "Not active,Active" bitfld.long 0x00 30. " ASB62 ,Active Status Bit 62" "Not active,Active" bitfld.long 0x00 29. " ASB61 ,Active Status Bit 61" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB60 ,Active Status Bit 60" "Not active,Active" bitfld.long 0x00 27. " ASB59 ,Active Status Bit 59" "Not active,Active" bitfld.long 0x00 26. " ASB58 ,Active Status Bit 58" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB57 ,Active Status Bit 57" "Not active,Active" bitfld.long 0x00 24. " ASB56 ,Active Status Bit 56" "Not active,Active" bitfld.long 0x00 23. " ASB55 ,Active Status Bit 55" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB54 ,Active Status Bit 54" "Not active,Active" bitfld.long 0x00 21. " ASB53 ,Active Status Bit 53" "Not active,Active" bitfld.long 0x00 20. " ASB52 ,Active Status Bit 52" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB51 ,Active Status Bit 51" "Not active,Active" bitfld.long 0x00 18. " ASB50 ,Active Status Bit 50" "Not active,Active" bitfld.long 0x00 17. " ASB49 ,Active Status Bit 49" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB48 ,Active Status Bit 48" "Not active,Active" bitfld.long 0x00 15. " ASB47 ,Active Status Bit 47" "Not active,Active" bitfld.long 0x00 14. " ASB46 ,Active Status Bit 46" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB45 ,Active Status Bit 45" "Not active,Active" bitfld.long 0x00 12. " ASB44 ,Active Status Bit 44" "Not active,Active" bitfld.long 0x00 11. " ASB43 ,Active Status Bit 43" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB42 ,Active Status Bit 42" "Not active,Active" bitfld.long 0x00 9. " ASB41 ,Active Status Bit 41" "Not active,Active" bitfld.long 0x00 8. " ASB40 ,Active Status Bit 40" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB39 ,Active Status Bit 39" "Not active,Active" bitfld.long 0x00 6. " ASB38 ,Active Status Bit 38" "Not active,Active" bitfld.long 0x00 5. " ASB37 ,Active Status Bit 37" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB36 ,Active Status Bit 36" "Not active,Active" bitfld.long 0x00 3. " ASB35 ,Active Status Bit 35" "Not active,Active" bitfld.long 0x00 2. " ASB34 ,Active Status Bit 34" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB33 ,Active Status Bit 33" "Not active,Active" bitfld.long 0x00 0. " ASB32 ,Active Status Bit 32" "Not active,Active" else hgroup.long 0x0304++0x03 hide.long 0x0 "GICD_ICDABR1,Active Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x02) rgroup.long 0x0308++0x03 line.long 0x0 "GICD_ICDABR2,Active Status Register 2" bitfld.long 0x00 31. " ASB95 ,Active Status Bit 95" "Not active,Active" bitfld.long 0x00 30. " ASB94 ,Active Status Bit 94" "Not active,Active" bitfld.long 0x00 29. " ASB93 ,Active Status Bit 93" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB92 ,Active Status Bit 92" "Not active,Active" bitfld.long 0x00 27. " ASB91 ,Active Status Bit 91" "Not active,Active" bitfld.long 0x00 26. " ASB90 ,Active Status Bit 90" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB89 ,Active Status Bit 89" "Not active,Active" bitfld.long 0x00 24. " ASB88 ,Active Status Bit 88" "Not active,Active" bitfld.long 0x00 23. " ASB87 ,Active Status Bit 87" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB86 ,Active Status Bit 86" "Not active,Active" bitfld.long 0x00 21. " ASB85 ,Active Status Bit 85" "Not active,Active" bitfld.long 0x00 20. " ASB84 ,Active Status Bit 84" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB83 ,Active Status Bit 83" "Not active,Active" bitfld.long 0x00 18. " ASB82 ,Active Status Bit 82" "Not active,Active" bitfld.long 0x00 17. " ASB81 ,Active Status Bit 81" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB80 ,Active Status Bit 80" "Not active,Active" bitfld.long 0x00 15. " ASB79 ,Active Status Bit 79" "Not active,Active" bitfld.long 0x00 14. " ASB78 ,Active Status Bit 78" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB77 ,Active Status Bit 77" "Not active,Active" bitfld.long 0x00 12. " ASB76 ,Active Status Bit 76" "Not active,Active" bitfld.long 0x00 11. " ASB75 ,Active Status Bit 75" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB74 ,Active Status Bit 74" "Not active,Active" bitfld.long 0x00 9. " ASB73 ,Active Status Bit 73" "Not active,Active" bitfld.long 0x00 8. " ASB72 ,Active Status Bit 72" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB71 ,Active Status Bit 71" "Not active,Active" bitfld.long 0x00 6. " ASB70 ,Active Status Bit 70" "Not active,Active" bitfld.long 0x00 5. " ASB69 ,Active Status Bit 69" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB68 ,Active Status Bit 68" "Not active,Active" bitfld.long 0x00 3. " ASB67 ,Active Status Bit 67" "Not active,Active" bitfld.long 0x00 2. " ASB66 ,Active Status Bit 66" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB65 ,Active Status Bit 65" "Not active,Active" bitfld.long 0x00 0. " ASB64 ,Active Status Bit 64" "Not active,Active" else hgroup.long 0x0308++0x03 hide.long 0x0 "GICD_ICDABR2,Active Status Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x03) rgroup.long 0x030C++0x03 line.long 0x0 "GICD_ICDABR3,Active Status Register 3" bitfld.long 0x00 31. " ASB127 ,Active Status Bit 127" "Not active,Active" bitfld.long 0x00 30. " ASB126 ,Active Status Bit 126" "Not active,Active" bitfld.long 0x00 29. " ASB125 ,Active Status Bit 125" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB124 ,Active Status Bit 124" "Not active,Active" bitfld.long 0x00 27. " ASB123 ,Active Status Bit 123" "Not active,Active" bitfld.long 0x00 26. " ASB122 ,Active Status Bit 122" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB121 ,Active Status Bit 121" "Not active,Active" bitfld.long 0x00 24. " ASB120 ,Active Status Bit 120" "Not active,Active" bitfld.long 0x00 23. " ASB119 ,Active Status Bit 119" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB118 ,Active Status Bit 118" "Not active,Active" bitfld.long 0x00 21. " ASB117 ,Active Status Bit 117" "Not active,Active" bitfld.long 0x00 20. " ASB116 ,Active Status Bit 116" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB115 ,Active Status Bit 115" "Not active,Active" bitfld.long 0x00 18. " ASB114 ,Active Status Bit 114" "Not active,Active" bitfld.long 0x00 17. " ASB113 ,Active Status Bit 113" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB112 ,Active Status Bit 112" "Not active,Active" bitfld.long 0x00 15. " ASB111 ,Active Status Bit 111" "Not active,Active" bitfld.long 0x00 14. " ASB110 ,Active Status Bit 110" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB109 ,Active Status Bit 109" "Not active,Active" bitfld.long 0x00 12. " ASB108 ,Active Status Bit 108" "Not active,Active" bitfld.long 0x00 11. " ASB107 ,Active Status Bit 107" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB106 ,Active Status Bit 106" "Not active,Active" bitfld.long 0x00 9. " ASB105 ,Active Status Bit 105" "Not active,Active" bitfld.long 0x00 8. " ASB104 ,Active Status Bit 104" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB103 ,Active Status Bit 103" "Not active,Active" bitfld.long 0x00 6. " ASB102 ,Active Status Bit 102" "Not active,Active" bitfld.long 0x00 5. " ASB101 ,Active Status Bit 101" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB100 ,Active Status Bit 100" "Not active,Active" bitfld.long 0x00 3. " ASB99 ,Active Status Bit 99" "Not active,Active" bitfld.long 0x00 2. " ASB98 ,Active Status Bit 98" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB97 ,Active Status Bit 97" "Not active,Active" bitfld.long 0x00 0. " ASB96 ,Active Status Bit 96" "Not active,Active" else hgroup.long 0x030C++0x03 hide.long 0x0 "GICD_ICDABR3,Active Status Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x04) rgroup.long 0x0310++0x03 line.long 0x0 "GICD_ICDABR4,Active Status Register 4" bitfld.long 0x00 31. " ASB159 ,Active Status Bit 159" "Not active,Active" bitfld.long 0x00 30. " ASB158 ,Active Status Bit 158" "Not active,Active" bitfld.long 0x00 29. " ASB157 ,Active Status Bit 157" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB156 ,Active Status Bit 156" "Not active,Active" bitfld.long 0x00 27. " ASB155 ,Active Status Bit 155" "Not active,Active" bitfld.long 0x00 26. " ASB154 ,Active Status Bit 154" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB153 ,Active Status Bit 153" "Not active,Active" bitfld.long 0x00 24. " ASB152 ,Active Status Bit 152" "Not active,Active" bitfld.long 0x00 23. " ASB151 ,Active Status Bit 151" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB150 ,Active Status Bit 150" "Not active,Active" bitfld.long 0x00 21. " ASB149 ,Active Status Bit 149" "Not active,Active" bitfld.long 0x00 20. " ASB148 ,Active Status Bit 148" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB147 ,Active Status Bit 147" "Not active,Active" bitfld.long 0x00 18. " ASB146 ,Active Status Bit 146" "Not active,Active" bitfld.long 0x00 17. " ASB145 ,Active Status Bit 145" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB144 ,Active Status Bit 144" "Not active,Active" bitfld.long 0x00 15. " ASB143 ,Active Status Bit 143" "Not active,Active" bitfld.long 0x00 14. " ASB142 ,Active Status Bit 142" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB141 ,Active Status Bit 141" "Not active,Active" bitfld.long 0x00 12. " ASB140 ,Active Status Bit 140" "Not active,Active" bitfld.long 0x00 11. " ASB139 ,Active Status Bit 139" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB138 ,Active Status Bit 138" "Not active,Active" bitfld.long 0x00 9. " ASB137 ,Active Status Bit 137" "Not active,Active" bitfld.long 0x00 8. " ASB136 ,Active Status Bit 136" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB135 ,Active Status Bit 135" "Not active,Active" bitfld.long 0x00 6. " ASB134 ,Active Status Bit 134" "Not active,Active" bitfld.long 0x00 5. " ASB133 ,Active Status Bit 133" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB132 ,Active Status Bit 132" "Not active,Active" bitfld.long 0x00 3. " ASB131 ,Active Status Bit 131" "Not active,Active" bitfld.long 0x00 2. " ASB130 ,Active Status Bit 130" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB129 ,Active Status Bit 129" "Not active,Active" bitfld.long 0x00 0. " ASB128 ,Active Status Bit 128" "Not active,Active" else hgroup.long 0x0310++0x03 hide.long 0x0 "GICD_ICDABR4,Active Status Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x05) rgroup.long 0x0314++0x03 line.long 0x0 "GICD_ICDABR5,Active Status Register 5" bitfld.long 0x00 31. " ASB191 ,Active Status Bit 191" "Not active,Active" bitfld.long 0x00 30. " ASB190 ,Active Status Bit 190" "Not active,Active" bitfld.long 0x00 29. " ASB189 ,Active Status Bit 189" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB188 ,Active Status Bit 188" "Not active,Active" bitfld.long 0x00 27. " ASB187 ,Active Status Bit 187" "Not active,Active" bitfld.long 0x00 26. " ASB186 ,Active Status Bit 186" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB185 ,Active Status Bit 185" "Not active,Active" bitfld.long 0x00 24. " ASB184 ,Active Status Bit 184" "Not active,Active" bitfld.long 0x00 23. " ASB183 ,Active Status Bit 183" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB182 ,Active Status Bit 182" "Not active,Active" bitfld.long 0x00 21. " ASB181 ,Active Status Bit 181" "Not active,Active" bitfld.long 0x00 20. " ASB180 ,Active Status Bit 180" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB179 ,Active Status Bit 179" "Not active,Active" bitfld.long 0x00 18. " ASB178 ,Active Status Bit 178" "Not active,Active" bitfld.long 0x00 17. " ASB177 ,Active Status Bit 177" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB176 ,Active Status Bit 176" "Not active,Active" bitfld.long 0x00 15. " ASB175 ,Active Status Bit 175" "Not active,Active" bitfld.long 0x00 14. " ASB174 ,Active Status Bit 174" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB173 ,Active Status Bit 173" "Not active,Active" bitfld.long 0x00 12. " ASB172 ,Active Status Bit 172" "Not active,Active" bitfld.long 0x00 11. " ASB171 ,Active Status Bit 171" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB170 ,Active Status Bit 170" "Not active,Active" bitfld.long 0x00 9. " ASB169 ,Active Status Bit 169" "Not active,Active" bitfld.long 0x00 8. " ASB168 ,Active Status Bit 168" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB167 ,Active Status Bit 167" "Not active,Active" bitfld.long 0x00 6. " ASB166 ,Active Status Bit 166" "Not active,Active" bitfld.long 0x00 5. " ASB165 ,Active Status Bit 165" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB164 ,Active Status Bit 164" "Not active,Active" bitfld.long 0x00 3. " ASB163 ,Active Status Bit 163" "Not active,Active" bitfld.long 0x00 2. " ASB162 ,Active Status Bit 162" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB161 ,Active Status Bit 161" "Not active,Active" bitfld.long 0x00 0. " ASB160 ,Active Status Bit 160" "Not active,Active" else hgroup.long 0x0314++0x03 hide.long 0x0 "GICD_ICDABR5,Active Status Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x06) rgroup.long 0x0318++0x03 line.long 0x0 "GICD_ICDABR6,Active Status Register 6" bitfld.long 0x00 31. " ASB223 ,Active Status Bit 223" "Not active,Active" bitfld.long 0x00 30. " ASB222 ,Active Status Bit 222" "Not active,Active" bitfld.long 0x00 29. " ASB221 ,Active Status Bit 221" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB220 ,Active Status Bit 220" "Not active,Active" bitfld.long 0x00 27. " ASB219 ,Active Status Bit 219" "Not active,Active" bitfld.long 0x00 26. " ASB218 ,Active Status Bit 218" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB217 ,Active Status Bit 217" "Not active,Active" bitfld.long 0x00 24. " ASB216 ,Active Status Bit 216" "Not active,Active" bitfld.long 0x00 23. " ASB215 ,Active Status Bit 215" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB214 ,Active Status Bit 214" "Not active,Active" bitfld.long 0x00 21. " ASB213 ,Active Status Bit 213" "Not active,Active" bitfld.long 0x00 20. " ASB212 ,Active Status Bit 212" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB211 ,Active Status Bit 211" "Not active,Active" bitfld.long 0x00 18. " ASB210 ,Active Status Bit 210" "Not active,Active" bitfld.long 0x00 17. " ASB209 ,Active Status Bit 209" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB208 ,Active Status Bit 208" "Not active,Active" bitfld.long 0x00 15. " ASB207 ,Active Status Bit 207" "Not active,Active" bitfld.long 0x00 14. " ASB206 ,Active Status Bit 206" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB205 ,Active Status Bit 205" "Not active,Active" bitfld.long 0x00 12. " ASB204 ,Active Status Bit 204" "Not active,Active" bitfld.long 0x00 11. " ASB203 ,Active Status Bit 203" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB202 ,Active Status Bit 202" "Not active,Active" bitfld.long 0x00 9. " ASB201 ,Active Status Bit 201" "Not active,Active" bitfld.long 0x00 8. " ASB200 ,Active Status Bit 200" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB199 ,Active Status Bit 199" "Not active,Active" bitfld.long 0x00 6. " ASB198 ,Active Status Bit 198" "Not active,Active" bitfld.long 0x00 5. " ASB197 ,Active Status Bit 197" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB196 ,Active Status Bit 196" "Not active,Active" bitfld.long 0x00 3. " ASB195 ,Active Status Bit 195" "Not active,Active" bitfld.long 0x00 2. " ASB194 ,Active Status Bit 194" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB193 ,Active Status Bit 193" "Not active,Active" bitfld.long 0x00 0. " ASB192 ,Active Status Bit 192" "Not active,Active" else hgroup.long 0x0318++0x03 hide.long 0x0 "GICD_ICDABR6,Active Status Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x07) rgroup.long 0x031C++0x03 line.long 0x0 "GICD_ICDABR7,Active Status Register 7" bitfld.long 0x00 31. " ASB255 ,Active Status Bit 255" "Not active,Active" bitfld.long 0x00 30. " ASB254 ,Active Status Bit 254" "Not active,Active" bitfld.long 0x00 29. " ASB253 ,Active Status Bit 253" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB252 ,Active Status Bit 252" "Not active,Active" bitfld.long 0x00 27. " ASB251 ,Active Status Bit 251" "Not active,Active" bitfld.long 0x00 26. " ASB250 ,Active Status Bit 250" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB249 ,Active Status Bit 249" "Not active,Active" bitfld.long 0x00 24. " ASB248 ,Active Status Bit 248" "Not active,Active" bitfld.long 0x00 23. " ASB247 ,Active Status Bit 247" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB246 ,Active Status Bit 246" "Not active,Active" bitfld.long 0x00 21. " ASB245 ,Active Status Bit 245" "Not active,Active" bitfld.long 0x00 20. " ASB244 ,Active Status Bit 244" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB243 ,Active Status Bit 243" "Not active,Active" bitfld.long 0x00 18. " ASB242 ,Active Status Bit 242" "Not active,Active" bitfld.long 0x00 17. " ASB241 ,Active Status Bit 241" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB240 ,Active Status Bit 240" "Not active,Active" bitfld.long 0x00 15. " ASB239 ,Active Status Bit 239" "Not active,Active" bitfld.long 0x00 14. " ASB238 ,Active Status Bit 238" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB237 ,Active Status Bit 237" "Not active,Active" bitfld.long 0x00 12. " ASB236 ,Active Status Bit 236" "Not active,Active" bitfld.long 0x00 11. " ASB235 ,Active Status Bit 235" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB234 ,Active Status Bit 234" "Not active,Active" bitfld.long 0x00 9. " ASB233 ,Active Status Bit 233" "Not active,Active" bitfld.long 0x00 8. " ASB232 ,Active Status Bit 232" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB231 ,Active Status Bit 231" "Not active,Active" bitfld.long 0x00 6. " ASB230 ,Active Status Bit 230" "Not active,Active" bitfld.long 0x00 5. " ASB229 ,Active Status Bit 229" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB228 ,Active Status Bit 228" "Not active,Active" bitfld.long 0x00 3. " ASB227 ,Active Status Bit 227" "Not active,Active" bitfld.long 0x00 2. " ASB226 ,Active Status Bit 226" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB225 ,Active Status Bit 225" "Not active,Active" bitfld.long 0x00 0. " ASB224 ,Active Status Bit 224" "Not active,Active" else hgroup.long 0x031C++0x03 hide.long 0x0 "GICD_ICDABR7,Active Status Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x08) rgroup.long 0x0320++0x03 line.long 0x0 "GICD_ICDABR8,Active Status Register 8" bitfld.long 0x00 31. " ASB287 ,Active Status Bit 287" "Not active,Active" bitfld.long 0x00 30. " ASB286 ,Active Status Bit 286" "Not active,Active" bitfld.long 0x00 29. " ASB285 ,Active Status Bit 285" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB284 ,Active Status Bit 284" "Not active,Active" bitfld.long 0x00 27. " ASB283 ,Active Status Bit 283" "Not active,Active" bitfld.long 0x00 26. " ASB282 ,Active Status Bit 282" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB281 ,Active Status Bit 281" "Not active,Active" bitfld.long 0x00 24. " ASB280 ,Active Status Bit 280" "Not active,Active" bitfld.long 0x00 23. " ASB279 ,Active Status Bit 279" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB278 ,Active Status Bit 278" "Not active,Active" bitfld.long 0x00 21. " ASB277 ,Active Status Bit 277" "Not active,Active" bitfld.long 0x00 20. " ASB276 ,Active Status Bit 276" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB275 ,Active Status Bit 275" "Not active,Active" bitfld.long 0x00 18. " ASB274 ,Active Status Bit 274" "Not active,Active" bitfld.long 0x00 17. " ASB273 ,Active Status Bit 273" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB272 ,Active Status Bit 272" "Not active,Active" bitfld.long 0x00 15. " ASB271 ,Active Status Bit 271" "Not active,Active" bitfld.long 0x00 14. " ASB270 ,Active Status Bit 270" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB269 ,Active Status Bit 269" "Not active,Active" bitfld.long 0x00 12. " ASB268 ,Active Status Bit 268" "Not active,Active" bitfld.long 0x00 11. " ASB267 ,Active Status Bit 267" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB266 ,Active Status Bit 266" "Not active,Active" bitfld.long 0x00 9. " ASB265 ,Active Status Bit 265" "Not active,Active" bitfld.long 0x00 8. " ASB264 ,Active Status Bit 264" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB263 ,Active Status Bit 263" "Not active,Active" bitfld.long 0x00 6. " ASB262 ,Active Status Bit 262" "Not active,Active" bitfld.long 0x00 5. " ASB261 ,Active Status Bit 261" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB260 ,Active Status Bit 260" "Not active,Active" bitfld.long 0x00 3. " ASB259 ,Active Status Bit 259" "Not active,Active" bitfld.long 0x00 2. " ASB258 ,Active Status Bit 258" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB257 ,Active Status Bit 257" "Not active,Active" bitfld.long 0x00 0. " ASB256 ,Active Status Bit 256" "Not active,Active" else hgroup.long 0x0320++0x03 hide.long 0x0 "GICD_ICDABR8,Active Status Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x09) rgroup.long 0x0324++0x03 line.long 0x0 "GICD_ICDABR9,Active Status Register 9" bitfld.long 0x00 31. " ASB319 ,Active Status Bit 319" "Not active,Active" bitfld.long 0x00 30. " ASB318 ,Active Status Bit 318" "Not active,Active" bitfld.long 0x00 29. " ASB317 ,Active Status Bit 317" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB316 ,Active Status Bit 316" "Not active,Active" bitfld.long 0x00 27. " ASB315 ,Active Status Bit 315" "Not active,Active" bitfld.long 0x00 26. " ASB314 ,Active Status Bit 314" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB313 ,Active Status Bit 313" "Not active,Active" bitfld.long 0x00 24. " ASB312 ,Active Status Bit 312" "Not active,Active" bitfld.long 0x00 23. " ASB311 ,Active Status Bit 311" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB310 ,Active Status Bit 310" "Not active,Active" bitfld.long 0x00 21. " ASB309 ,Active Status Bit 309" "Not active,Active" bitfld.long 0x00 20. " ASB308 ,Active Status Bit 308" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB307 ,Active Status Bit 307" "Not active,Active" bitfld.long 0x00 18. " ASB306 ,Active Status Bit 306" "Not active,Active" bitfld.long 0x00 17. " ASB305 ,Active Status Bit 305" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB304 ,Active Status Bit 304" "Not active,Active" bitfld.long 0x00 15. " ASB303 ,Active Status Bit 303" "Not active,Active" bitfld.long 0x00 14. " ASB302 ,Active Status Bit 302" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB301 ,Active Status Bit 301" "Not active,Active" bitfld.long 0x00 12. " ASB300 ,Active Status Bit 300" "Not active,Active" bitfld.long 0x00 11. " ASB299 ,Active Status Bit 299" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB298 ,Active Status Bit 298" "Not active,Active" bitfld.long 0x00 9. " ASB297 ,Active Status Bit 297" "Not active,Active" bitfld.long 0x00 8. " ASB296 ,Active Status Bit 296" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB295 ,Active Status Bit 295" "Not active,Active" bitfld.long 0x00 6. " ASB294 ,Active Status Bit 294" "Not active,Active" bitfld.long 0x00 5. " ASB293 ,Active Status Bit 293" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB292 ,Active Status Bit 292" "Not active,Active" bitfld.long 0x00 3. " ASB291 ,Active Status Bit 291" "Not active,Active" bitfld.long 0x00 2. " ASB290 ,Active Status Bit 290" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB289 ,Active Status Bit 289" "Not active,Active" bitfld.long 0x00 0. " ASB288 ,Active Status Bit 288" "Not active,Active" else hgroup.long 0x0324++0x03 hide.long 0x0 "GICD_ICDABR9,Active Status Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0A) rgroup.long 0x0328++0x03 line.long 0x0 "GICD_ICDABR10,Active Status Register 10" bitfld.long 0x00 31. " ASB351 ,Active Status Bit 351" "Not active,Active" bitfld.long 0x00 30. " ASB350 ,Active Status Bit 350" "Not active,Active" bitfld.long 0x00 29. " ASB349 ,Active Status Bit 349" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB348 ,Active Status Bit 348" "Not active,Active" bitfld.long 0x00 27. " ASB347 ,Active Status Bit 347" "Not active,Active" bitfld.long 0x00 26. " ASB346 ,Active Status Bit 346" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB345 ,Active Status Bit 345" "Not active,Active" bitfld.long 0x00 24. " ASB344 ,Active Status Bit 344" "Not active,Active" bitfld.long 0x00 23. " ASB343 ,Active Status Bit 343" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB342 ,Active Status Bit 342" "Not active,Active" bitfld.long 0x00 21. " ASB341 ,Active Status Bit 341" "Not active,Active" bitfld.long 0x00 20. " ASB340 ,Active Status Bit 340" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB339 ,Active Status Bit 339" "Not active,Active" bitfld.long 0x00 18. " ASB338 ,Active Status Bit 338" "Not active,Active" bitfld.long 0x00 17. " ASB337 ,Active Status Bit 337" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB336 ,Active Status Bit 336" "Not active,Active" bitfld.long 0x00 15. " ASB335 ,Active Status Bit 335" "Not active,Active" bitfld.long 0x00 14. " ASB334 ,Active Status Bit 334" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB333 ,Active Status Bit 333" "Not active,Active" bitfld.long 0x00 12. " ASB332 ,Active Status Bit 332" "Not active,Active" bitfld.long 0x00 11. " ASB331 ,Active Status Bit 331" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB330 ,Active Status Bit 330" "Not active,Active" bitfld.long 0x00 9. " ASB329 ,Active Status Bit 329" "Not active,Active" bitfld.long 0x00 8. " ASB328 ,Active Status Bit 328" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB327 ,Active Status Bit 327" "Not active,Active" bitfld.long 0x00 6. " ASB326 ,Active Status Bit 326" "Not active,Active" bitfld.long 0x00 5. " ASB325 ,Active Status Bit 325" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB324 ,Active Status Bit 324" "Not active,Active" bitfld.long 0x00 3. " ASB323 ,Active Status Bit 323" "Not active,Active" bitfld.long 0x00 2. " ASB322 ,Active Status Bit 322" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB321 ,Active Status Bit 321" "Not active,Active" bitfld.long 0x00 0. " ASB320 ,Active Status Bit 320" "Not active,Active" else hgroup.long 0x0328++0x03 hide.long 0x0 "GICD_ICDABR10,Active Status Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0B) rgroup.long 0x032C++0x03 line.long 0x0 "GICD_ICDABR11,Active Status Register 11" bitfld.long 0x00 31. " ASB383 ,Active Status Bit 383" "Not active,Active" bitfld.long 0x00 30. " ASB382 ,Active Status Bit 382" "Not active,Active" bitfld.long 0x00 29. " ASB381 ,Active Status Bit 381" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB380 ,Active Status Bit 380" "Not active,Active" bitfld.long 0x00 27. " ASB379 ,Active Status Bit 379" "Not active,Active" bitfld.long 0x00 26. " ASB378 ,Active Status Bit 378" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB377 ,Active Status Bit 377" "Not active,Active" bitfld.long 0x00 24. " ASB376 ,Active Status Bit 376" "Not active,Active" bitfld.long 0x00 23. " ASB375 ,Active Status Bit 375" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB374 ,Active Status Bit 374" "Not active,Active" bitfld.long 0x00 21. " ASB373 ,Active Status Bit 373" "Not active,Active" bitfld.long 0x00 20. " ASB372 ,Active Status Bit 372" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB371 ,Active Status Bit 371" "Not active,Active" bitfld.long 0x00 18. " ASB370 ,Active Status Bit 370" "Not active,Active" bitfld.long 0x00 17. " ASB369 ,Active Status Bit 369" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB368 ,Active Status Bit 368" "Not active,Active" bitfld.long 0x00 15. " ASB367 ,Active Status Bit 367" "Not active,Active" bitfld.long 0x00 14. " ASB366 ,Active Status Bit 366" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB365 ,Active Status Bit 365" "Not active,Active" bitfld.long 0x00 12. " ASB364 ,Active Status Bit 364" "Not active,Active" bitfld.long 0x00 11. " ASB363 ,Active Status Bit 363" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB362 ,Active Status Bit 362" "Not active,Active" bitfld.long 0x00 9. " ASB361 ,Active Status Bit 361" "Not active,Active" bitfld.long 0x00 8. " ASB360 ,Active Status Bit 360" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB359 ,Active Status Bit 359" "Not active,Active" bitfld.long 0x00 6. " ASB358 ,Active Status Bit 358" "Not active,Active" bitfld.long 0x00 5. " ASB357 ,Active Status Bit 357" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB356 ,Active Status Bit 356" "Not active,Active" bitfld.long 0x00 3. " ASB355 ,Active Status Bit 355" "Not active,Active" bitfld.long 0x00 2. " ASB354 ,Active Status Bit 354" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB353 ,Active Status Bit 353" "Not active,Active" bitfld.long 0x00 0. " ASB352 ,Active Status Bit 352" "Not active,Active" else hgroup.long 0x032C++0x03 hide.long 0x0 "GICD_ICDABR11,Active Status Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0C) rgroup.long 0x0330++0x03 line.long 0x0 "GICD_ICDABR12,Active Status Register 12" bitfld.long 0x00 31. " ASB415 ,Active Status Bit 415" "Not active,Active" bitfld.long 0x00 30. " ASB414 ,Active Status Bit 414" "Not active,Active" bitfld.long 0x00 29. " ASB413 ,Active Status Bit 413" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB412 ,Active Status Bit 412" "Not active,Active" bitfld.long 0x00 27. " ASB411 ,Active Status Bit 411" "Not active,Active" bitfld.long 0x00 26. " ASB410 ,Active Status Bit 410" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB409 ,Active Status Bit 409" "Not active,Active" bitfld.long 0x00 24. " ASB408 ,Active Status Bit 408" "Not active,Active" bitfld.long 0x00 23. " ASB407 ,Active Status Bit 407" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB406 ,Active Status Bit 406" "Not active,Active" bitfld.long 0x00 21. " ASB405 ,Active Status Bit 405" "Not active,Active" bitfld.long 0x00 20. " ASB404 ,Active Status Bit 404" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB403 ,Active Status Bit 403" "Not active,Active" bitfld.long 0x00 18. " ASB402 ,Active Status Bit 402" "Not active,Active" bitfld.long 0x00 17. " ASB401 ,Active Status Bit 401" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB400 ,Active Status Bit 400" "Not active,Active" bitfld.long 0x00 15. " ASB399 ,Active Status Bit 399" "Not active,Active" bitfld.long 0x00 14. " ASB398 ,Active Status Bit 398" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB397 ,Active Status Bit 397" "Not active,Active" bitfld.long 0x00 12. " ASB396 ,Active Status Bit 396" "Not active,Active" bitfld.long 0x00 11. " ASB395 ,Active Status Bit 395" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB394 ,Active Status Bit 394" "Not active,Active" bitfld.long 0x00 9. " ASB393 ,Active Status Bit 393" "Not active,Active" bitfld.long 0x00 8. " ASB392 ,Active Status Bit 392" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB391 ,Active Status Bit 391" "Not active,Active" bitfld.long 0x00 6. " ASB390 ,Active Status Bit 390" "Not active,Active" bitfld.long 0x00 5. " ASB389 ,Active Status Bit 389" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB388 ,Active Status Bit 388" "Not active,Active" bitfld.long 0x00 3. " ASB387 ,Active Status Bit 387" "Not active,Active" bitfld.long 0x00 2. " ASB386 ,Active Status Bit 386" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB385 ,Active Status Bit 385" "Not active,Active" bitfld.long 0x00 0. " ASB384 ,Active Status Bit 384" "Not active,Active" else hgroup.long 0x0330++0x03 hide.long 0x0 "GICD_ICDABR12,Active Status Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0D) rgroup.long 0x0334++0x03 line.long 0x0 "GICD_ICDABR13,Active Status Register 13" bitfld.long 0x00 31. " ASB447 ,Active Status Bit 447" "Not active,Active" bitfld.long 0x00 30. " ASB446 ,Active Status Bit 446" "Not active,Active" bitfld.long 0x00 29. " ASB445 ,Active Status Bit 445" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB444 ,Active Status Bit 444" "Not active,Active" bitfld.long 0x00 27. " ASB443 ,Active Status Bit 443" "Not active,Active" bitfld.long 0x00 26. " ASB442 ,Active Status Bit 442" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB441 ,Active Status Bit 441" "Not active,Active" bitfld.long 0x00 24. " ASB440 ,Active Status Bit 440" "Not active,Active" bitfld.long 0x00 23. " ASB439 ,Active Status Bit 439" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB438 ,Active Status Bit 438" "Not active,Active" bitfld.long 0x00 21. " ASB437 ,Active Status Bit 437" "Not active,Active" bitfld.long 0x00 20. " ASB436 ,Active Status Bit 436" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB435 ,Active Status Bit 435" "Not active,Active" bitfld.long 0x00 18. " ASB434 ,Active Status Bit 434" "Not active,Active" bitfld.long 0x00 17. " ASB433 ,Active Status Bit 433" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB432 ,Active Status Bit 432" "Not active,Active" bitfld.long 0x00 15. " ASB431 ,Active Status Bit 431" "Not active,Active" bitfld.long 0x00 14. " ASB430 ,Active Status Bit 430" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB429 ,Active Status Bit 429" "Not active,Active" bitfld.long 0x00 12. " ASB428 ,Active Status Bit 428" "Not active,Active" bitfld.long 0x00 11. " ASB427 ,Active Status Bit 427" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB426 ,Active Status Bit 426" "Not active,Active" bitfld.long 0x00 9. " ASB425 ,Active Status Bit 425" "Not active,Active" bitfld.long 0x00 8. " ASB424 ,Active Status Bit 424" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB423 ,Active Status Bit 423" "Not active,Active" bitfld.long 0x00 6. " ASB422 ,Active Status Bit 422" "Not active,Active" bitfld.long 0x00 5. " ASB421 ,Active Status Bit 421" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB420 ,Active Status Bit 420" "Not active,Active" bitfld.long 0x00 3. " ASB419 ,Active Status Bit 419" "Not active,Active" bitfld.long 0x00 2. " ASB418 ,Active Status Bit 418" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB417 ,Active Status Bit 417" "Not active,Active" bitfld.long 0x00 0. " ASB416 ,Active Status Bit 416" "Not active,Active" else hgroup.long 0x0334++0x03 hide.long 0x0 "GICD_ICDABR13,Active Status Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0E) rgroup.long 0x0338++0x03 line.long 0x0 "GICD_ICDABR14,Active Status Register 14" bitfld.long 0x00 31. " ASB479 ,Active Status Bit 479" "Not active,Active" bitfld.long 0x00 30. " ASB478 ,Active Status Bit 478" "Not active,Active" bitfld.long 0x00 29. " ASB477 ,Active Status Bit 477" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB476 ,Active Status Bit 476" "Not active,Active" bitfld.long 0x00 27. " ASB475 ,Active Status Bit 475" "Not active,Active" bitfld.long 0x00 26. " ASB474 ,Active Status Bit 474" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB473 ,Active Status Bit 473" "Not active,Active" bitfld.long 0x00 24. " ASB472 ,Active Status Bit 472" "Not active,Active" bitfld.long 0x00 23. " ASB471 ,Active Status Bit 471" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB470 ,Active Status Bit 470" "Not active,Active" bitfld.long 0x00 21. " ASB469 ,Active Status Bit 469" "Not active,Active" bitfld.long 0x00 20. " ASB468 ,Active Status Bit 468" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB467 ,Active Status Bit 467" "Not active,Active" bitfld.long 0x00 18. " ASB466 ,Active Status Bit 466" "Not active,Active" bitfld.long 0x00 17. " ASB465 ,Active Status Bit 465" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB464 ,Active Status Bit 464" "Not active,Active" bitfld.long 0x00 15. " ASB463 ,Active Status Bit 463" "Not active,Active" bitfld.long 0x00 14. " ASB462 ,Active Status Bit 462" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB461 ,Active Status Bit 461" "Not active,Active" bitfld.long 0x00 12. " ASB460 ,Active Status Bit 460" "Not active,Active" bitfld.long 0x00 11. " ASB459 ,Active Status Bit 459" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB458 ,Active Status Bit 458" "Not active,Active" bitfld.long 0x00 9. " ASB457 ,Active Status Bit 457" "Not active,Active" bitfld.long 0x00 8. " ASB456 ,Active Status Bit 456" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB455 ,Active Status Bit 455" "Not active,Active" bitfld.long 0x00 6. " ASB454 ,Active Status Bit 454" "Not active,Active" bitfld.long 0x00 5. " ASB453 ,Active Status Bit 453" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB452 ,Active Status Bit 452" "Not active,Active" bitfld.long 0x00 3. " ASB451 ,Active Status Bit 451" "Not active,Active" bitfld.long 0x00 2. " ASB450 ,Active Status Bit 450" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB449 ,Active Status Bit 449" "Not active,Active" bitfld.long 0x00 0. " ASB448 ,Active Status Bit 448" "Not active,Active" else hgroup.long 0x0338++0x03 hide.long 0x0 "GICD_ICDABR14,Active Status Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0F) rgroup.long 0x033C++0x03 line.long 0x0 "GICD_ICDABR15,Active Status Register 15" bitfld.long 0x00 31. " ASB511 ,Active Status Bit 511" "Not active,Active" bitfld.long 0x00 30. " ASB510 ,Active Status Bit 510" "Not active,Active" bitfld.long 0x00 29. " ASB509 ,Active Status Bit 509" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB508 ,Active Status Bit 508" "Not active,Active" bitfld.long 0x00 27. " ASB507 ,Active Status Bit 507" "Not active,Active" bitfld.long 0x00 26. " ASB506 ,Active Status Bit 506" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB505 ,Active Status Bit 505" "Not active,Active" bitfld.long 0x00 24. " ASB504 ,Active Status Bit 504" "Not active,Active" bitfld.long 0x00 23. " ASB503 ,Active Status Bit 503" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB502 ,Active Status Bit 502" "Not active,Active" bitfld.long 0x00 21. " ASB501 ,Active Status Bit 501" "Not active,Active" bitfld.long 0x00 20. " ASB500 ,Active Status Bit 500" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB499 ,Active Status Bit 499" "Not active,Active" bitfld.long 0x00 18. " ASB498 ,Active Status Bit 498" "Not active,Active" bitfld.long 0x00 17. " ASB497 ,Active Status Bit 497" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB496 ,Active Status Bit 496" "Not active,Active" bitfld.long 0x00 15. " ASB495 ,Active Status Bit 495" "Not active,Active" bitfld.long 0x00 14. " ASB494 ,Active Status Bit 494" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB493 ,Active Status Bit 493" "Not active,Active" bitfld.long 0x00 12. " ASB492 ,Active Status Bit 492" "Not active,Active" bitfld.long 0x00 11. " ASB491 ,Active Status Bit 491" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB490 ,Active Status Bit 490" "Not active,Active" bitfld.long 0x00 9. " ASB489 ,Active Status Bit 489" "Not active,Active" bitfld.long 0x00 8. " ASB488 ,Active Status Bit 488" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB487 ,Active Status Bit 487" "Not active,Active" bitfld.long 0x00 6. " ASB486 ,Active Status Bit 486" "Not active,Active" bitfld.long 0x00 5. " ASB485 ,Active Status Bit 485" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB484 ,Active Status Bit 484" "Not active,Active" bitfld.long 0x00 3. " ASB483 ,Active Status Bit 483" "Not active,Active" bitfld.long 0x00 2. " ASB482 ,Active Status Bit 482" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB481 ,Active Status Bit 481" "Not active,Active" bitfld.long 0x00 0. " ASB480 ,Active Status Bit 480" "Not active,Active" else hgroup.long 0x033C++0x03 hide.long 0x0 "GICD_ICDABR15,Active Status Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10) rgroup.long 0x0340++0x03 line.long 0x0 "GICD_ICDABR16,Active Status Register 16" bitfld.long 0x00 31. " ASB543 ,Active Status Bit 543" "Not active,Active" bitfld.long 0x00 30. " ASB542 ,Active Status Bit 542" "Not active,Active" bitfld.long 0x00 29. " ASB541 ,Active Status Bit 541" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB540 ,Active Status Bit 540" "Not active,Active" bitfld.long 0x00 27. " ASB539 ,Active Status Bit 539" "Not active,Active" bitfld.long 0x00 26. " ASB538 ,Active Status Bit 538" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB537 ,Active Status Bit 537" "Not active,Active" bitfld.long 0x00 24. " ASB536 ,Active Status Bit 536" "Not active,Active" bitfld.long 0x00 23. " ASB535 ,Active Status Bit 535" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB534 ,Active Status Bit 534" "Not active,Active" bitfld.long 0x00 21. " ASB533 ,Active Status Bit 533" "Not active,Active" bitfld.long 0x00 20. " ASB532 ,Active Status Bit 532" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB531 ,Active Status Bit 531" "Not active,Active" bitfld.long 0x00 18. " ASB530 ,Active Status Bit 530" "Not active,Active" bitfld.long 0x00 17. " ASB529 ,Active Status Bit 529" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB528 ,Active Status Bit 528" "Not active,Active" bitfld.long 0x00 15. " ASB527 ,Active Status Bit 527" "Not active,Active" bitfld.long 0x00 14. " ASB526 ,Active Status Bit 526" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB525 ,Active Status Bit 525" "Not active,Active" bitfld.long 0x00 12. " ASB524 ,Active Status Bit 524" "Not active,Active" bitfld.long 0x00 11. " ASB523 ,Active Status Bit 523" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB522 ,Active Status Bit 522" "Not active,Active" bitfld.long 0x00 9. " ASB521 ,Active Status Bit 521" "Not active,Active" bitfld.long 0x00 8. " ASB520 ,Active Status Bit 520" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB519 ,Active Status Bit 519" "Not active,Active" bitfld.long 0x00 6. " ASB518 ,Active Status Bit 518" "Not active,Active" bitfld.long 0x00 5. " ASB517 ,Active Status Bit 517" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB516 ,Active Status Bit 516" "Not active,Active" bitfld.long 0x00 3. " ASB515 ,Active Status Bit 515" "Not active,Active" bitfld.long 0x00 2. " ASB514 ,Active Status Bit 514" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB513 ,Active Status Bit 513" "Not active,Active" bitfld.long 0x00 0. " ASB512 ,Active Status Bit 512" "Not active,Active" else hgroup.long 0x0340++0x03 hide.long 0x0 "GICD_ICDABR16,Active Status Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11) rgroup.long 0x0344++0x03 line.long 0x0 "GICD_ICDABR17,Active Status Register 17" bitfld.long 0x00 31. " ASB575 ,Active Status Bit 575" "Not active,Active" bitfld.long 0x00 30. " ASB574 ,Active Status Bit 574" "Not active,Active" bitfld.long 0x00 29. " ASB573 ,Active Status Bit 573" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB572 ,Active Status Bit 572" "Not active,Active" bitfld.long 0x00 27. " ASB571 ,Active Status Bit 571" "Not active,Active" bitfld.long 0x00 26. " ASB570 ,Active Status Bit 570" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB569 ,Active Status Bit 569" "Not active,Active" bitfld.long 0x00 24. " ASB568 ,Active Status Bit 568" "Not active,Active" bitfld.long 0x00 23. " ASB567 ,Active Status Bit 567" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB566 ,Active Status Bit 566" "Not active,Active" bitfld.long 0x00 21. " ASB565 ,Active Status Bit 565" "Not active,Active" bitfld.long 0x00 20. " ASB564 ,Active Status Bit 564" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB563 ,Active Status Bit 563" "Not active,Active" bitfld.long 0x00 18. " ASB562 ,Active Status Bit 562" "Not active,Active" bitfld.long 0x00 17. " ASB561 ,Active Status Bit 561" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB560 ,Active Status Bit 560" "Not active,Active" bitfld.long 0x00 15. " ASB559 ,Active Status Bit 559" "Not active,Active" bitfld.long 0x00 14. " ASB558 ,Active Status Bit 558" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB557 ,Active Status Bit 557" "Not active,Active" bitfld.long 0x00 12. " ASB556 ,Active Status Bit 556" "Not active,Active" bitfld.long 0x00 11. " ASB555 ,Active Status Bit 555" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB554 ,Active Status Bit 554" "Not active,Active" bitfld.long 0x00 9. " ASB553 ,Active Status Bit 553" "Not active,Active" bitfld.long 0x00 8. " ASB552 ,Active Status Bit 552" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB551 ,Active Status Bit 551" "Not active,Active" bitfld.long 0x00 6. " ASB550 ,Active Status Bit 550" "Not active,Active" bitfld.long 0x00 5. " ASB549 ,Active Status Bit 549" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB548 ,Active Status Bit 548" "Not active,Active" bitfld.long 0x00 3. " ASB547 ,Active Status Bit 547" "Not active,Active" bitfld.long 0x00 2. " ASB546 ,Active Status Bit 546" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB545 ,Active Status Bit 545" "Not active,Active" bitfld.long 0x00 0. " ASB544 ,Active Status Bit 544" "Not active,Active" else hgroup.long 0x0344++0x03 hide.long 0x0 "GICD_ICDABR17,Active Status Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12) rgroup.long 0x0348++0x03 line.long 0x0 "GICD_ICDABR18,Active Status Register 18" bitfld.long 0x00 31. " ASB607 ,Active Status Bit 607" "Not active,Active" bitfld.long 0x00 30. " ASB606 ,Active Status Bit 606" "Not active,Active" bitfld.long 0x00 29. " ASB605 ,Active Status Bit 605" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB604 ,Active Status Bit 604" "Not active,Active" bitfld.long 0x00 27. " ASB603 ,Active Status Bit 603" "Not active,Active" bitfld.long 0x00 26. " ASB602 ,Active Status Bit 602" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB601 ,Active Status Bit 601" "Not active,Active" bitfld.long 0x00 24. " ASB600 ,Active Status Bit 600" "Not active,Active" bitfld.long 0x00 23. " ASB599 ,Active Status Bit 599" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB598 ,Active Status Bit 598" "Not active,Active" bitfld.long 0x00 21. " ASB597 ,Active Status Bit 597" "Not active,Active" bitfld.long 0x00 20. " ASB596 ,Active Status Bit 596" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB595 ,Active Status Bit 595" "Not active,Active" bitfld.long 0x00 18. " ASB594 ,Active Status Bit 594" "Not active,Active" bitfld.long 0x00 17. " ASB593 ,Active Status Bit 593" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB592 ,Active Status Bit 592" "Not active,Active" bitfld.long 0x00 15. " ASB591 ,Active Status Bit 591" "Not active,Active" bitfld.long 0x00 14. " ASB590 ,Active Status Bit 590" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB589 ,Active Status Bit 589" "Not active,Active" bitfld.long 0x00 12. " ASB588 ,Active Status Bit 588" "Not active,Active" bitfld.long 0x00 11. " ASB587 ,Active Status Bit 587" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB586 ,Active Status Bit 586" "Not active,Active" bitfld.long 0x00 9. " ASB585 ,Active Status Bit 585" "Not active,Active" bitfld.long 0x00 8. " ASB584 ,Active Status Bit 584" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB583 ,Active Status Bit 583" "Not active,Active" bitfld.long 0x00 6. " ASB582 ,Active Status Bit 582" "Not active,Active" bitfld.long 0x00 5. " ASB581 ,Active Status Bit 581" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB580 ,Active Status Bit 580" "Not active,Active" bitfld.long 0x00 3. " ASB579 ,Active Status Bit 579" "Not active,Active" bitfld.long 0x00 2. " ASB578 ,Active Status Bit 578" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB577 ,Active Status Bit 577" "Not active,Active" bitfld.long 0x00 0. " ASB576 ,Active Status Bit 576" "Not active,Active" else hgroup.long 0x0348++0x03 hide.long 0x0 "GICD_ICDABR18,Active Status Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13) rgroup.long 0x034C++0x03 line.long 0x0 "GICD_ICDABR19,Active Status Register 19" bitfld.long 0x00 31. " ASB639 ,Active Status Bit 639" "Not active,Active" bitfld.long 0x00 30. " ASB638 ,Active Status Bit 638" "Not active,Active" bitfld.long 0x00 29. " ASB637 ,Active Status Bit 637" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB636 ,Active Status Bit 636" "Not active,Active" bitfld.long 0x00 27. " ASB635 ,Active Status Bit 635" "Not active,Active" bitfld.long 0x00 26. " ASB634 ,Active Status Bit 634" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB633 ,Active Status Bit 633" "Not active,Active" bitfld.long 0x00 24. " ASB632 ,Active Status Bit 632" "Not active,Active" bitfld.long 0x00 23. " ASB631 ,Active Status Bit 631" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB630 ,Active Status Bit 630" "Not active,Active" bitfld.long 0x00 21. " ASB629 ,Active Status Bit 629" "Not active,Active" bitfld.long 0x00 20. " ASB628 ,Active Status Bit 628" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB627 ,Active Status Bit 627" "Not active,Active" bitfld.long 0x00 18. " ASB626 ,Active Status Bit 626" "Not active,Active" bitfld.long 0x00 17. " ASB625 ,Active Status Bit 625" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB624 ,Active Status Bit 624" "Not active,Active" bitfld.long 0x00 15. " ASB623 ,Active Status Bit 623" "Not active,Active" bitfld.long 0x00 14. " ASB622 ,Active Status Bit 622" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB621 ,Active Status Bit 621" "Not active,Active" bitfld.long 0x00 12. " ASB620 ,Active Status Bit 620" "Not active,Active" bitfld.long 0x00 11. " ASB619 ,Active Status Bit 619" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB618 ,Active Status Bit 618" "Not active,Active" bitfld.long 0x00 9. " ASB617 ,Active Status Bit 617" "Not active,Active" bitfld.long 0x00 8. " ASB616 ,Active Status Bit 616" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB615 ,Active Status Bit 615" "Not active,Active" bitfld.long 0x00 6. " ASB614 ,Active Status Bit 614" "Not active,Active" bitfld.long 0x00 5. " ASB613 ,Active Status Bit 613" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB612 ,Active Status Bit 612" "Not active,Active" bitfld.long 0x00 3. " ASB611 ,Active Status Bit 611" "Not active,Active" bitfld.long 0x00 2. " ASB610 ,Active Status Bit 610" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB609 ,Active Status Bit 609" "Not active,Active" bitfld.long 0x00 0. " ASB608 ,Active Status Bit 608" "Not active,Active" else hgroup.long 0x034C++0x03 hide.long 0x0 "GICD_ICDABR19,Active Status Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14) rgroup.long 0x0350++0x03 line.long 0x0 "GICD_ICDABR20,Active Status Register 20" bitfld.long 0x00 31. " ASB671 ,Active Status Bit 671" "Not active,Active" bitfld.long 0x00 30. " ASB670 ,Active Status Bit 670" "Not active,Active" bitfld.long 0x00 29. " ASB669 ,Active Status Bit 669" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB668 ,Active Status Bit 668" "Not active,Active" bitfld.long 0x00 27. " ASB667 ,Active Status Bit 667" "Not active,Active" bitfld.long 0x00 26. " ASB666 ,Active Status Bit 666" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB665 ,Active Status Bit 665" "Not active,Active" bitfld.long 0x00 24. " ASB664 ,Active Status Bit 664" "Not active,Active" bitfld.long 0x00 23. " ASB663 ,Active Status Bit 663" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB662 ,Active Status Bit 662" "Not active,Active" bitfld.long 0x00 21. " ASB661 ,Active Status Bit 661" "Not active,Active" bitfld.long 0x00 20. " ASB660 ,Active Status Bit 660" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB659 ,Active Status Bit 659" "Not active,Active" bitfld.long 0x00 18. " ASB658 ,Active Status Bit 658" "Not active,Active" bitfld.long 0x00 17. " ASB657 ,Active Status Bit 657" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB656 ,Active Status Bit 656" "Not active,Active" bitfld.long 0x00 15. " ASB655 ,Active Status Bit 655" "Not active,Active" bitfld.long 0x00 14. " ASB654 ,Active Status Bit 654" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB653 ,Active Status Bit 653" "Not active,Active" bitfld.long 0x00 12. " ASB652 ,Active Status Bit 652" "Not active,Active" bitfld.long 0x00 11. " ASB651 ,Active Status Bit 651" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB650 ,Active Status Bit 650" "Not active,Active" bitfld.long 0x00 9. " ASB649 ,Active Status Bit 649" "Not active,Active" bitfld.long 0x00 8. " ASB648 ,Active Status Bit 648" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB647 ,Active Status Bit 647" "Not active,Active" bitfld.long 0x00 6. " ASB646 ,Active Status Bit 646" "Not active,Active" bitfld.long 0x00 5. " ASB645 ,Active Status Bit 645" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB644 ,Active Status Bit 644" "Not active,Active" bitfld.long 0x00 3. " ASB643 ,Active Status Bit 643" "Not active,Active" bitfld.long 0x00 2. " ASB642 ,Active Status Bit 642" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB641 ,Active Status Bit 641" "Not active,Active" bitfld.long 0x00 0. " ASB640 ,Active Status Bit 640" "Not active,Active" else hgroup.long 0x0350++0x03 hide.long 0x0 "GICD_ICDABR20,Active Status Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15) rgroup.long 0x0354++0x03 line.long 0x0 "GICD_ICDABR21,Active Status Register 21" bitfld.long 0x00 31. " ASB703 ,Active Status Bit 703" "Not active,Active" bitfld.long 0x00 30. " ASB702 ,Active Status Bit 702" "Not active,Active" bitfld.long 0x00 29. " ASB701 ,Active Status Bit 701" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB700 ,Active Status Bit 700" "Not active,Active" bitfld.long 0x00 27. " ASB699 ,Active Status Bit 699" "Not active,Active" bitfld.long 0x00 26. " ASB698 ,Active Status Bit 698" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB697 ,Active Status Bit 697" "Not active,Active" bitfld.long 0x00 24. " ASB696 ,Active Status Bit 696" "Not active,Active" bitfld.long 0x00 23. " ASB695 ,Active Status Bit 695" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB694 ,Active Status Bit 694" "Not active,Active" bitfld.long 0x00 21. " ASB693 ,Active Status Bit 693" "Not active,Active" bitfld.long 0x00 20. " ASB692 ,Active Status Bit 692" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB691 ,Active Status Bit 691" "Not active,Active" bitfld.long 0x00 18. " ASB690 ,Active Status Bit 690" "Not active,Active" bitfld.long 0x00 17. " ASB689 ,Active Status Bit 689" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB688 ,Active Status Bit 688" "Not active,Active" bitfld.long 0x00 15. " ASB687 ,Active Status Bit 687" "Not active,Active" bitfld.long 0x00 14. " ASB686 ,Active Status Bit 686" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB685 ,Active Status Bit 685" "Not active,Active" bitfld.long 0x00 12. " ASB684 ,Active Status Bit 684" "Not active,Active" bitfld.long 0x00 11. " ASB683 ,Active Status Bit 683" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB682 ,Active Status Bit 682" "Not active,Active" bitfld.long 0x00 9. " ASB681 ,Active Status Bit 681" "Not active,Active" bitfld.long 0x00 8. " ASB680 ,Active Status Bit 680" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB679 ,Active Status Bit 679" "Not active,Active" bitfld.long 0x00 6. " ASB678 ,Active Status Bit 678" "Not active,Active" bitfld.long 0x00 5. " ASB677 ,Active Status Bit 677" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB676 ,Active Status Bit 676" "Not active,Active" bitfld.long 0x00 3. " ASB675 ,Active Status Bit 675" "Not active,Active" bitfld.long 0x00 2. " ASB674 ,Active Status Bit 674" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB673 ,Active Status Bit 673" "Not active,Active" bitfld.long 0x00 0. " ASB672 ,Active Status Bit 672" "Not active,Active" else hgroup.long 0x0354++0x03 hide.long 0x0 "GICD_ICDABR21,Active Status Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16) rgroup.long 0x0358++0x03 line.long 0x0 "GICD_ICDABR22,Active Status Register 22" bitfld.long 0x00 31. " ASB735 ,Active Status Bit 735" "Not active,Active" bitfld.long 0x00 30. " ASB734 ,Active Status Bit 734" "Not active,Active" bitfld.long 0x00 29. " ASB733 ,Active Status Bit 733" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB732 ,Active Status Bit 732" "Not active,Active" bitfld.long 0x00 27. " ASB731 ,Active Status Bit 731" "Not active,Active" bitfld.long 0x00 26. " ASB730 ,Active Status Bit 730" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB729 ,Active Status Bit 729" "Not active,Active" bitfld.long 0x00 24. " ASB728 ,Active Status Bit 728" "Not active,Active" bitfld.long 0x00 23. " ASB727 ,Active Status Bit 727" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB726 ,Active Status Bit 726" "Not active,Active" bitfld.long 0x00 21. " ASB725 ,Active Status Bit 725" "Not active,Active" bitfld.long 0x00 20. " ASB724 ,Active Status Bit 724" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB723 ,Active Status Bit 723" "Not active,Active" bitfld.long 0x00 18. " ASB722 ,Active Status Bit 722" "Not active,Active" bitfld.long 0x00 17. " ASB721 ,Active Status Bit 721" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB720 ,Active Status Bit 720" "Not active,Active" bitfld.long 0x00 15. " ASB719 ,Active Status Bit 719" "Not active,Active" bitfld.long 0x00 14. " ASB718 ,Active Status Bit 718" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB717 ,Active Status Bit 717" "Not active,Active" bitfld.long 0x00 12. " ASB716 ,Active Status Bit 716" "Not active,Active" bitfld.long 0x00 11. " ASB715 ,Active Status Bit 715" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB714 ,Active Status Bit 714" "Not active,Active" bitfld.long 0x00 9. " ASB713 ,Active Status Bit 713" "Not active,Active" bitfld.long 0x00 8. " ASB712 ,Active Status Bit 712" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB711 ,Active Status Bit 711" "Not active,Active" bitfld.long 0x00 6. " ASB710 ,Active Status Bit 710" "Not active,Active" bitfld.long 0x00 5. " ASB709 ,Active Status Bit 709" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB708 ,Active Status Bit 708" "Not active,Active" bitfld.long 0x00 3. " ASB707 ,Active Status Bit 707" "Not active,Active" bitfld.long 0x00 2. " ASB706 ,Active Status Bit 706" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB705 ,Active Status Bit 705" "Not active,Active" bitfld.long 0x00 0. " ASB704 ,Active Status Bit 704" "Not active,Active" else hgroup.long 0x0358++0x03 hide.long 0x0 "GICD_ICDABR22,Active Status Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17) rgroup.long 0x035C++0x03 line.long 0x0 "GICD_ICDABR23,Active Status Register 23" bitfld.long 0x00 31. " ASB767 ,Active Status Bit 767" "Not active,Active" bitfld.long 0x00 30. " ASB766 ,Active Status Bit 766" "Not active,Active" bitfld.long 0x00 29. " ASB765 ,Active Status Bit 765" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB764 ,Active Status Bit 764" "Not active,Active" bitfld.long 0x00 27. " ASB763 ,Active Status Bit 763" "Not active,Active" bitfld.long 0x00 26. " ASB762 ,Active Status Bit 762" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB761 ,Active Status Bit 761" "Not active,Active" bitfld.long 0x00 24. " ASB760 ,Active Status Bit 760" "Not active,Active" bitfld.long 0x00 23. " ASB759 ,Active Status Bit 759" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB758 ,Active Status Bit 758" "Not active,Active" bitfld.long 0x00 21. " ASB757 ,Active Status Bit 757" "Not active,Active" bitfld.long 0x00 20. " ASB756 ,Active Status Bit 756" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB755 ,Active Status Bit 755" "Not active,Active" bitfld.long 0x00 18. " ASB754 ,Active Status Bit 754" "Not active,Active" bitfld.long 0x00 17. " ASB753 ,Active Status Bit 753" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB752 ,Active Status Bit 752" "Not active,Active" bitfld.long 0x00 15. " ASB751 ,Active Status Bit 751" "Not active,Active" bitfld.long 0x00 14. " ASB750 ,Active Status Bit 750" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB749 ,Active Status Bit 749" "Not active,Active" bitfld.long 0x00 12. " ASB748 ,Active Status Bit 748" "Not active,Active" bitfld.long 0x00 11. " ASB747 ,Active Status Bit 747" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB746 ,Active Status Bit 746" "Not active,Active" bitfld.long 0x00 9. " ASB745 ,Active Status Bit 745" "Not active,Active" bitfld.long 0x00 8. " ASB744 ,Active Status Bit 744" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB743 ,Active Status Bit 743" "Not active,Active" bitfld.long 0x00 6. " ASB742 ,Active Status Bit 742" "Not active,Active" bitfld.long 0x00 5. " ASB741 ,Active Status Bit 741" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB740 ,Active Status Bit 740" "Not active,Active" bitfld.long 0x00 3. " ASB739 ,Active Status Bit 739" "Not active,Active" bitfld.long 0x00 2. " ASB738 ,Active Status Bit 738" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB737 ,Active Status Bit 737" "Not active,Active" bitfld.long 0x00 0. " ASB736 ,Active Status Bit 736" "Not active,Active" else hgroup.long 0x035C++0x03 hide.long 0x0 "GICD_ICDABR23,Active Status Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18) rgroup.long 0x0360++0x03 line.long 0x0 "GICD_ICDABR24,Active Status Register 24" bitfld.long 0x00 31. " ASB799 ,Active Status Bit 799" "Not active,Active" bitfld.long 0x00 30. " ASB798 ,Active Status Bit 798" "Not active,Active" bitfld.long 0x00 29. " ASB797 ,Active Status Bit 797" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB796 ,Active Status Bit 796" "Not active,Active" bitfld.long 0x00 27. " ASB795 ,Active Status Bit 795" "Not active,Active" bitfld.long 0x00 26. " ASB794 ,Active Status Bit 794" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB793 ,Active Status Bit 793" "Not active,Active" bitfld.long 0x00 24. " ASB792 ,Active Status Bit 792" "Not active,Active" bitfld.long 0x00 23. " ASB791 ,Active Status Bit 791" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB790 ,Active Status Bit 790" "Not active,Active" bitfld.long 0x00 21. " ASB789 ,Active Status Bit 789" "Not active,Active" bitfld.long 0x00 20. " ASB788 ,Active Status Bit 788" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB787 ,Active Status Bit 787" "Not active,Active" bitfld.long 0x00 18. " ASB786 ,Active Status Bit 786" "Not active,Active" bitfld.long 0x00 17. " ASB785 ,Active Status Bit 785" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB784 ,Active Status Bit 784" "Not active,Active" bitfld.long 0x00 15. " ASB783 ,Active Status Bit 783" "Not active,Active" bitfld.long 0x00 14. " ASB782 ,Active Status Bit 782" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB781 ,Active Status Bit 781" "Not active,Active" bitfld.long 0x00 12. " ASB780 ,Active Status Bit 780" "Not active,Active" bitfld.long 0x00 11. " ASB779 ,Active Status Bit 779" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB778 ,Active Status Bit 778" "Not active,Active" bitfld.long 0x00 9. " ASB777 ,Active Status Bit 777" "Not active,Active" bitfld.long 0x00 8. " ASB776 ,Active Status Bit 776" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB775 ,Active Status Bit 775" "Not active,Active" bitfld.long 0x00 6. " ASB774 ,Active Status Bit 774" "Not active,Active" bitfld.long 0x00 5. " ASB773 ,Active Status Bit 773" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB772 ,Active Status Bit 772" "Not active,Active" bitfld.long 0x00 3. " ASB771 ,Active Status Bit 771" "Not active,Active" bitfld.long 0x00 2. " ASB770 ,Active Status Bit 770" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB769 ,Active Status Bit 769" "Not active,Active" bitfld.long 0x00 0. " ASB768 ,Active Status Bit 768" "Not active,Active" else hgroup.long 0x0360++0x03 hide.long 0x0 "GICD_ICDABR24,Active Status Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19) rgroup.long 0x0364++0x03 line.long 0x0 "GICD_ICDABR25,Active Status Register 25" bitfld.long 0x00 31. " ASB831 ,Active Status Bit 831" "Not active,Active" bitfld.long 0x00 30. " ASB830 ,Active Status Bit 830" "Not active,Active" bitfld.long 0x00 29. " ASB829 ,Active Status Bit 829" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB828 ,Active Status Bit 828" "Not active,Active" bitfld.long 0x00 27. " ASB827 ,Active Status Bit 827" "Not active,Active" bitfld.long 0x00 26. " ASB826 ,Active Status Bit 826" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB825 ,Active Status Bit 825" "Not active,Active" bitfld.long 0x00 24. " ASB824 ,Active Status Bit 824" "Not active,Active" bitfld.long 0x00 23. " ASB823 ,Active Status Bit 823" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB822 ,Active Status Bit 822" "Not active,Active" bitfld.long 0x00 21. " ASB821 ,Active Status Bit 821" "Not active,Active" bitfld.long 0x00 20. " ASB820 ,Active Status Bit 820" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB819 ,Active Status Bit 819" "Not active,Active" bitfld.long 0x00 18. " ASB818 ,Active Status Bit 818" "Not active,Active" bitfld.long 0x00 17. " ASB817 ,Active Status Bit 817" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB816 ,Active Status Bit 816" "Not active,Active" bitfld.long 0x00 15. " ASB815 ,Active Status Bit 815" "Not active,Active" bitfld.long 0x00 14. " ASB814 ,Active Status Bit 814" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB813 ,Active Status Bit 813" "Not active,Active" bitfld.long 0x00 12. " ASB812 ,Active Status Bit 812" "Not active,Active" bitfld.long 0x00 11. " ASB811 ,Active Status Bit 811" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB810 ,Active Status Bit 810" "Not active,Active" bitfld.long 0x00 9. " ASB809 ,Active Status Bit 809" "Not active,Active" bitfld.long 0x00 8. " ASB808 ,Active Status Bit 808" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB807 ,Active Status Bit 807" "Not active,Active" bitfld.long 0x00 6. " ASB806 ,Active Status Bit 806" "Not active,Active" bitfld.long 0x00 5. " ASB805 ,Active Status Bit 805" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB804 ,Active Status Bit 804" "Not active,Active" bitfld.long 0x00 3. " ASB803 ,Active Status Bit 803" "Not active,Active" bitfld.long 0x00 2. " ASB802 ,Active Status Bit 802" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB801 ,Active Status Bit 801" "Not active,Active" bitfld.long 0x00 0. " ASB800 ,Active Status Bit 800" "Not active,Active" else hgroup.long 0x0364++0x03 hide.long 0x0 "GICD_ICDABR25,Active Status Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A) rgroup.long 0x0368++0x03 line.long 0x0 "GICD_ICDABR26,Active Status Register 26" bitfld.long 0x00 31. " ASB863 ,Active Status Bit 863" "Not active,Active" bitfld.long 0x00 30. " ASB862 ,Active Status Bit 862" "Not active,Active" bitfld.long 0x00 29. " ASB861 ,Active Status Bit 861" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB860 ,Active Status Bit 860" "Not active,Active" bitfld.long 0x00 27. " ASB859 ,Active Status Bit 859" "Not active,Active" bitfld.long 0x00 26. " ASB858 ,Active Status Bit 858" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB857 ,Active Status Bit 857" "Not active,Active" bitfld.long 0x00 24. " ASB856 ,Active Status Bit 856" "Not active,Active" bitfld.long 0x00 23. " ASB855 ,Active Status Bit 855" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB854 ,Active Status Bit 854" "Not active,Active" bitfld.long 0x00 21. " ASB853 ,Active Status Bit 853" "Not active,Active" bitfld.long 0x00 20. " ASB852 ,Active Status Bit 852" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB851 ,Active Status Bit 851" "Not active,Active" bitfld.long 0x00 18. " ASB850 ,Active Status Bit 850" "Not active,Active" bitfld.long 0x00 17. " ASB849 ,Active Status Bit 849" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB848 ,Active Status Bit 848" "Not active,Active" bitfld.long 0x00 15. " ASB847 ,Active Status Bit 847" "Not active,Active" bitfld.long 0x00 14. " ASB846 ,Active Status Bit 846" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB845 ,Active Status Bit 845" "Not active,Active" bitfld.long 0x00 12. " ASB844 ,Active Status Bit 844" "Not active,Active" bitfld.long 0x00 11. " ASB843 ,Active Status Bit 843" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB842 ,Active Status Bit 842" "Not active,Active" bitfld.long 0x00 9. " ASB841 ,Active Status Bit 841" "Not active,Active" bitfld.long 0x00 8. " ASB840 ,Active Status Bit 840" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB839 ,Active Status Bit 839" "Not active,Active" bitfld.long 0x00 6. " ASB838 ,Active Status Bit 838" "Not active,Active" bitfld.long 0x00 5. " ASB837 ,Active Status Bit 837" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB836 ,Active Status Bit 836" "Not active,Active" bitfld.long 0x00 3. " ASB835 ,Active Status Bit 835" "Not active,Active" bitfld.long 0x00 2. " ASB834 ,Active Status Bit 834" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB833 ,Active Status Bit 833" "Not active,Active" bitfld.long 0x00 0. " ASB832 ,Active Status Bit 832" "Not active,Active" else hgroup.long 0x0368++0x03 hide.long 0x0 "GICD_ICDABR26,Active Status Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B) rgroup.long 0x036C++0x03 line.long 0x0 "GICD_ICDABR27,Active Status Register 27" bitfld.long 0x00 31. " ASB895 ,Active Status Bit 895" "Not active,Active" bitfld.long 0x00 30. " ASB894 ,Active Status Bit 894" "Not active,Active" bitfld.long 0x00 29. " ASB893 ,Active Status Bit 893" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB892 ,Active Status Bit 892" "Not active,Active" bitfld.long 0x00 27. " ASB891 ,Active Status Bit 891" "Not active,Active" bitfld.long 0x00 26. " ASB890 ,Active Status Bit 890" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB889 ,Active Status Bit 889" "Not active,Active" bitfld.long 0x00 24. " ASB888 ,Active Status Bit 888" "Not active,Active" bitfld.long 0x00 23. " ASB887 ,Active Status Bit 887" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB886 ,Active Status Bit 886" "Not active,Active" bitfld.long 0x00 21. " ASB885 ,Active Status Bit 885" "Not active,Active" bitfld.long 0x00 20. " ASB884 ,Active Status Bit 884" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB883 ,Active Status Bit 883" "Not active,Active" bitfld.long 0x00 18. " ASB882 ,Active Status Bit 882" "Not active,Active" bitfld.long 0x00 17. " ASB881 ,Active Status Bit 881" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB880 ,Active Status Bit 880" "Not active,Active" bitfld.long 0x00 15. " ASB879 ,Active Status Bit 879" "Not active,Active" bitfld.long 0x00 14. " ASB878 ,Active Status Bit 878" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB877 ,Active Status Bit 877" "Not active,Active" bitfld.long 0x00 12. " ASB876 ,Active Status Bit 876" "Not active,Active" bitfld.long 0x00 11. " ASB875 ,Active Status Bit 875" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB874 ,Active Status Bit 874" "Not active,Active" bitfld.long 0x00 9. " ASB873 ,Active Status Bit 873" "Not active,Active" bitfld.long 0x00 8. " ASB872 ,Active Status Bit 872" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB871 ,Active Status Bit 871" "Not active,Active" bitfld.long 0x00 6. " ASB870 ,Active Status Bit 870" "Not active,Active" bitfld.long 0x00 5. " ASB869 ,Active Status Bit 869" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB868 ,Active Status Bit 868" "Not active,Active" bitfld.long 0x00 3. " ASB867 ,Active Status Bit 867" "Not active,Active" bitfld.long 0x00 2. " ASB866 ,Active Status Bit 866" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB865 ,Active Status Bit 865" "Not active,Active" bitfld.long 0x00 0. " ASB864 ,Active Status Bit 864" "Not active,Active" else hgroup.long 0x036C++0x03 hide.long 0x0 "GICD_ICDABR27,Active Status Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C) rgroup.long 0x0370++0x03 line.long 0x0 "GICD_ICDABR28,Active Status Register 28" bitfld.long 0x00 31. " ASB927 ,Active Status Bit 927" "Not active,Active" bitfld.long 0x00 30. " ASB926 ,Active Status Bit 926" "Not active,Active" bitfld.long 0x00 29. " ASB925 ,Active Status Bit 925" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB924 ,Active Status Bit 924" "Not active,Active" bitfld.long 0x00 27. " ASB923 ,Active Status Bit 923" "Not active,Active" bitfld.long 0x00 26. " ASB922 ,Active Status Bit 922" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB921 ,Active Status Bit 921" "Not active,Active" bitfld.long 0x00 24. " ASB920 ,Active Status Bit 920" "Not active,Active" bitfld.long 0x00 23. " ASB919 ,Active Status Bit 919" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB918 ,Active Status Bit 918" "Not active,Active" bitfld.long 0x00 21. " ASB917 ,Active Status Bit 917" "Not active,Active" bitfld.long 0x00 20. " ASB916 ,Active Status Bit 916" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB915 ,Active Status Bit 915" "Not active,Active" bitfld.long 0x00 18. " ASB914 ,Active Status Bit 914" "Not active,Active" bitfld.long 0x00 17. " ASB913 ,Active Status Bit 913" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB912 ,Active Status Bit 912" "Not active,Active" bitfld.long 0x00 15. " ASB911 ,Active Status Bit 911" "Not active,Active" bitfld.long 0x00 14. " ASB910 ,Active Status Bit 910" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB909 ,Active Status Bit 909" "Not active,Active" bitfld.long 0x00 12. " ASB908 ,Active Status Bit 908" "Not active,Active" bitfld.long 0x00 11. " ASB907 ,Active Status Bit 907" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB906 ,Active Status Bit 906" "Not active,Active" bitfld.long 0x00 9. " ASB905 ,Active Status Bit 905" "Not active,Active" bitfld.long 0x00 8. " ASB904 ,Active Status Bit 904" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB903 ,Active Status Bit 903" "Not active,Active" bitfld.long 0x00 6. " ASB902 ,Active Status Bit 902" "Not active,Active" bitfld.long 0x00 5. " ASB901 ,Active Status Bit 901" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB900 ,Active Status Bit 900" "Not active,Active" bitfld.long 0x00 3. " ASB899 ,Active Status Bit 899" "Not active,Active" bitfld.long 0x00 2. " ASB898 ,Active Status Bit 898" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB897 ,Active Status Bit 897" "Not active,Active" bitfld.long 0x00 0. " ASB896 ,Active Status Bit 896" "Not active,Active" else hgroup.long 0x0370++0x03 hide.long 0x0 "GICD_ICDABR28,Active Status Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D) rgroup.long 0x0374++0x03 line.long 0x0 "GICD_ICDABR29,Active Status Register 29" bitfld.long 0x00 31. " ASB959 ,Active Status Bit 959" "Not active,Active" bitfld.long 0x00 30. " ASB958 ,Active Status Bit 958" "Not active,Active" bitfld.long 0x00 29. " ASB957 ,Active Status Bit 957" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB956 ,Active Status Bit 956" "Not active,Active" bitfld.long 0x00 27. " ASB955 ,Active Status Bit 955" "Not active,Active" bitfld.long 0x00 26. " ASB954 ,Active Status Bit 954" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB953 ,Active Status Bit 953" "Not active,Active" bitfld.long 0x00 24. " ASB952 ,Active Status Bit 952" "Not active,Active" bitfld.long 0x00 23. " ASB951 ,Active Status Bit 951" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB950 ,Active Status Bit 950" "Not active,Active" bitfld.long 0x00 21. " ASB949 ,Active Status Bit 949" "Not active,Active" bitfld.long 0x00 20. " ASB948 ,Active Status Bit 948" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB947 ,Active Status Bit 947" "Not active,Active" bitfld.long 0x00 18. " ASB946 ,Active Status Bit 946" "Not active,Active" bitfld.long 0x00 17. " ASB945 ,Active Status Bit 945" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB944 ,Active Status Bit 944" "Not active,Active" bitfld.long 0x00 15. " ASB943 ,Active Status Bit 943" "Not active,Active" bitfld.long 0x00 14. " ASB942 ,Active Status Bit 942" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB941 ,Active Status Bit 941" "Not active,Active" bitfld.long 0x00 12. " ASB940 ,Active Status Bit 940" "Not active,Active" bitfld.long 0x00 11. " ASB939 ,Active Status Bit 939" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB938 ,Active Status Bit 938" "Not active,Active" bitfld.long 0x00 9. " ASB937 ,Active Status Bit 937" "Not active,Active" bitfld.long 0x00 8. " ASB936 ,Active Status Bit 936" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB935 ,Active Status Bit 935" "Not active,Active" bitfld.long 0x00 6. " ASB934 ,Active Status Bit 934" "Not active,Active" bitfld.long 0x00 5. " ASB933 ,Active Status Bit 933" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB932 ,Active Status Bit 932" "Not active,Active" bitfld.long 0x00 3. " ASB931 ,Active Status Bit 931" "Not active,Active" bitfld.long 0x00 2. " ASB930 ,Active Status Bit 930" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB929 ,Active Status Bit 929" "Not active,Active" bitfld.long 0x00 0. " ASB928 ,Active Status Bit 928" "Not active,Active" else hgroup.long 0x0374++0x03 hide.long 0x0 "GICD_ICDABR29,Active Status Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E) rgroup.long 0x0378++0x03 line.long 0x0 "GICD_ICDABR30,Active Status Register 30" bitfld.long 0x00 31. " ASB991 ,Active Status Bit 991" "Not active,Active" bitfld.long 0x00 30. " ASB990 ,Active Status Bit 990" "Not active,Active" bitfld.long 0x00 29. " ASB989 ,Active Status Bit 989" "Not active,Active" textline " " bitfld.long 0x00 28. " ASB988 ,Active Status Bit 988" "Not active,Active" bitfld.long 0x00 27. " ASB987 ,Active Status Bit 987" "Not active,Active" bitfld.long 0x00 26. " ASB986 ,Active Status Bit 986" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB985 ,Active Status Bit 985" "Not active,Active" bitfld.long 0x00 24. " ASB984 ,Active Status Bit 984" "Not active,Active" bitfld.long 0x00 23. " ASB983 ,Active Status Bit 983" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB982 ,Active Status Bit 982" "Not active,Active" bitfld.long 0x00 21. " ASB981 ,Active Status Bit 981" "Not active,Active" bitfld.long 0x00 20. " ASB980 ,Active Status Bit 980" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB979 ,Active Status Bit 979" "Not active,Active" bitfld.long 0x00 18. " ASB978 ,Active Status Bit 978" "Not active,Active" bitfld.long 0x00 17. " ASB977 ,Active Status Bit 977" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB976 ,Active Status Bit 976" "Not active,Active" bitfld.long 0x00 15. " ASB975 ,Active Status Bit 975" "Not active,Active" bitfld.long 0x00 14. " ASB974 ,Active Status Bit 974" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB973 ,Active Status Bit 973" "Not active,Active" bitfld.long 0x00 12. " ASB972 ,Active Status Bit 972" "Not active,Active" bitfld.long 0x00 11. " ASB971 ,Active Status Bit 971" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB970 ,Active Status Bit 970" "Not active,Active" bitfld.long 0x00 9. " ASB969 ,Active Status Bit 969" "Not active,Active" bitfld.long 0x00 8. " ASB968 ,Active Status Bit 968" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB967 ,Active Status Bit 967" "Not active,Active" bitfld.long 0x00 6. " ASB966 ,Active Status Bit 966" "Not active,Active" bitfld.long 0x00 5. " ASB965 ,Active Status Bit 965" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB964 ,Active Status Bit 964" "Not active,Active" bitfld.long 0x00 3. " ASB963 ,Active Status Bit 963" "Not active,Active" bitfld.long 0x00 2. " ASB962 ,Active Status Bit 962" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB961 ,Active Status Bit 961" "Not active,Active" bitfld.long 0x00 0. " ASB960 ,Active Status Bit 960" "Not active,Active" else hgroup.long 0x0378++0x03 hide.long 0x0 "GICD_ICDABR30,Active Status Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)==0x1F) rgroup.long 0x037C++0x03 line.long 0x0 "GICD_ICDABR31,Active Status Register 31" bitfld.long 0x00 27. " ASB1019 ,Active Status Bit 1019" "Not active,Active" bitfld.long 0x00 26. " ASB1018 ,Active Status Bit 1018" "Not active,Active" textline " " bitfld.long 0x00 25. " ASB1017 ,Active Status Bit 1017" "Not active,Active" bitfld.long 0x00 24. " ASB1016 ,Active Status Bit 1016" "Not active,Active" bitfld.long 0x00 23. " ASB1015 ,Active Status Bit 1015" "Not active,Active" textline " " bitfld.long 0x00 22. " ASB1014 ,Active Status Bit 1014" "Not active,Active" bitfld.long 0x00 21. " ASB1013 ,Active Status Bit 1013" "Not active,Active" bitfld.long 0x00 20. " ASB1012 ,Active Status Bit 1012" "Not active,Active" textline " " bitfld.long 0x00 19. " ASB1011 ,Active Status Bit 1011" "Not active,Active" bitfld.long 0x00 18. " ASB1010 ,Active Status Bit 1010" "Not active,Active" bitfld.long 0x00 17. " ASB1009 ,Active Status Bit 1009" "Not active,Active" textline " " bitfld.long 0x00 16. " ASB1008 ,Active Status Bit 1008" "Not active,Active" bitfld.long 0x00 15. " ASB1007 ,Active Status Bit 1007" "Not active,Active" bitfld.long 0x00 14. " ASB1006 ,Active Status Bit 1006" "Not active,Active" textline " " bitfld.long 0x00 13. " ASB1005 ,Active Status Bit 1005" "Not active,Active" bitfld.long 0x00 12. " ASB1004 ,Active Status Bit 1004" "Not active,Active" bitfld.long 0x00 11. " ASB1003 ,Active Status Bit 1003" "Not active,Active" textline " " bitfld.long 0x00 10. " ASB1002 ,Active Status Bit 1002" "Not active,Active" bitfld.long 0x00 9. " ASB1001 ,Active Status Bit 1001" "Not active,Active" bitfld.long 0x00 8. " ASB1000 ,Active Status Bit 1000" "Not active,Active" textline " " bitfld.long 0x00 7. " ASB999 ,Active Status Bit 999" "Not active,Active" bitfld.long 0x00 6. " ASB998 ,Active Status Bit 998" "Not active,Active" bitfld.long 0x00 5. " ASB997 ,Active Status Bit 997" "Not active,Active" textline " " bitfld.long 0x00 4. " ASB996 ,Active Status Bit 996" "Not active,Active" bitfld.long 0x00 3. " ASB995 ,Active Status Bit 995" "Not active,Active" bitfld.long 0x00 2. " ASB994 ,Active Status Bit 994" "Not active,Active" textline " " bitfld.long 0x00 1. " ASB993 ,Active Status Bit 993" "Not active,Active" bitfld.long 0x00 0. " ASB992 ,Active Status Bit 992" "Not active,Active" else hgroup.long 0x037C++0x03 hide.long 0x0 "GICD_ICDABR31,Active Status Register 31" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 20. tree "Priority Registers" group.long 0x400++0x03 line.long 0x00 "GICD_IPRIORITYR0,Interrupt Priority Register 0" hexmask.long.byte 0x00 24.--31. 1. " INTID3 ,Interrupt ID3 Priority/Priority Byte Offset 3 " hexmask.long.byte 0x00 16.--23. 1. " INTID2 ,Interrupt ID2 Priority/Priority Byte Offset 2 " hexmask.long.byte 0x00 8.--15. 1. " INTID1 ,Interrupt ID1 Priority/Priority Byte Offset 1 " hexmask.long.byte 0x00 0.--7. 1. " INTID0 ,Interrupt ID0 Priority/Priority Byte Offset 0 " group.long 0x404++0x03 line.long 0x00 "GICD_IPRIORITYR1,Interrupt Priority Register 1" hexmask.long.byte 0x00 24.--31. 1. " INTID7 ,Interrupt ID7 Priority/Priority Byte Offset 7 " hexmask.long.byte 0x00 16.--23. 1. " INTID6 ,Interrupt ID6 Priority/Priority Byte Offset 6 " hexmask.long.byte 0x00 8.--15. 1. " INTID5 ,Interrupt ID5 Priority/Priority Byte Offset 5 " hexmask.long.byte 0x00 0.--7. 1. " INTID4 ,Interrupt ID4 Priority/Priority Byte Offset 4 " group.long 0x408++0x03 line.long 0x00 "GICD_IPRIORITYR2,Interrupt Priority Register 2" hexmask.long.byte 0x00 24.--31. 1. " INTID11 ,Interrupt ID11 Priority/Priority Byte Offset 11 " hexmask.long.byte 0x00 16.--23. 1. " INTID10 ,Interrupt ID10 Priority/Priority Byte Offset 10 " hexmask.long.byte 0x00 8.--15. 1. " INTID9 ,Interrupt ID9 Priority/Priority Byte Offset 9 " hexmask.long.byte 0x00 0.--7. 1. " INTID8 ,Interrupt ID8 Priority/Priority Byte Offset 8 " group.long 0x40C++0x03 line.long 0x00 "GICD_IPRIORITYR3,Interrupt Priority Register 3" hexmask.long.byte 0x00 24.--31. 1. " INTID15 ,Interrupt ID15 Priority/Priority Byte Offset 15 " hexmask.long.byte 0x00 16.--23. 1. " INTID14 ,Interrupt ID14 Priority/Priority Byte Offset 14 " hexmask.long.byte 0x00 8.--15. 1. " INTID13 ,Interrupt ID13 Priority/Priority Byte Offset 13 " hexmask.long.byte 0x00 0.--7. 1. " INTID12 ,Interrupt ID12 Priority/Priority Byte Offset 12 " group.long 0x410++0x03 line.long 0x00 "GICD_IPRIORITYR4,Interrupt Priority Register 4" hexmask.long.byte 0x00 24.--31. 1. " INTID19 ,Interrupt ID19 Priority/Priority Byte Offset 19 " hexmask.long.byte 0x00 16.--23. 1. " INTID18 ,Interrupt ID18 Priority/Priority Byte Offset 18 " hexmask.long.byte 0x00 8.--15. 1. " INTID17 ,Interrupt ID17 Priority/Priority Byte Offset 17 " hexmask.long.byte 0x00 0.--7. 1. " INTID16 ,Interrupt ID16 Priority/Priority Byte Offset 16 " group.long 0x414++0x03 line.long 0x00 "GICD_IPRIORITYR5,Interrupt Priority Register 5" hexmask.long.byte 0x00 24.--31. 1. " INTID23 ,Interrupt ID23 Priority/Priority Byte Offset 23 " hexmask.long.byte 0x00 16.--23. 1. " INTID22 ,Interrupt ID22 Priority/Priority Byte Offset 22 " hexmask.long.byte 0x00 8.--15. 1. " INTID21 ,Interrupt ID21 Priority/Priority Byte Offset 21 " hexmask.long.byte 0x00 0.--7. 1. " INTID20 ,Interrupt ID20 Priority/Priority Byte Offset 20 " group.long 0x418++0x03 line.long 0x00 "GICD_IPRIORITYR6,Interrupt Priority Register 6" hexmask.long.byte 0x00 24.--31. 1. " INTID27 ,Interrupt ID27 Priority/Priority Byte Offset 27 " hexmask.long.byte 0x00 16.--23. 1. " INTID26 ,Interrupt ID26 Priority/Priority Byte Offset 26 " hexmask.long.byte 0x00 8.--15. 1. " INTID25 ,Interrupt ID25 Priority/Priority Byte Offset 25 " hexmask.long.byte 0x00 0.--7. 1. " INTID24 ,Interrupt ID24 Priority/Priority Byte Offset 24 " group.long 0x41C++0x03 line.long 0x00 "GICD_IPRIORITYR7,Interrupt Priority Register 7" hexmask.long.byte 0x00 24.--31. 1. " INTID31 ,Interrupt ID31 Priority/Priority Byte Offset 31 " hexmask.long.byte 0x00 16.--23. 1. " INTID30 ,Interrupt ID30 Priority/Priority Byte Offset 30 " hexmask.long.byte 0x00 8.--15. 1. " INTID29 ,Interrupt ID29 Priority/Priority Byte Offset 29 " hexmask.long.byte 0x00 0.--7. 1. " INTID28 ,Interrupt ID28 Priority/Priority Byte Offset 28 " if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x01) group.long 0x420++0x03 line.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8" hexmask.long.byte 0x00 24.--31. 1. " INTID35 ,Interrupt ID35 Priority/Priority Byte Offset 35 " hexmask.long.byte 0x00 16.--23. 1. " INTID34 ,Interrupt ID34 Priority/Priority Byte Offset 34 " hexmask.long.byte 0x00 8.--15. 1. " INTID33 ,Interrupt ID33 Priority/Priority Byte Offset 33 " hexmask.long.byte 0x00 0.--7. 1. " INTID32 ,Interrupt ID32 Priority/Priority Byte Offset 32 " group.long 0x424++0x03 line.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9" hexmask.long.byte 0x00 24.--31. 1. " INTID39 ,Interrupt ID39 Priority/Priority Byte Offset 39 " hexmask.long.byte 0x00 16.--23. 1. " INTID38 ,Interrupt ID38 Priority/Priority Byte Offset 38 " hexmask.long.byte 0x00 8.--15. 1. " INTID37 ,Interrupt ID37 Priority/Priority Byte Offset 37 " hexmask.long.byte 0x00 0.--7. 1. " INTID36 ,Interrupt ID36 Priority/Priority Byte Offset 36 " group.long 0x428++0x03 line.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10" hexmask.long.byte 0x00 24.--31. 1. " INTID43 ,Interrupt ID43 Priority/Priority Byte Offset 43 " hexmask.long.byte 0x00 16.--23. 1. " INTID42 ,Interrupt ID42 Priority/Priority Byte Offset 42 " hexmask.long.byte 0x00 8.--15. 1. " INTID41 ,Interrupt ID41 Priority/Priority Byte Offset 41 " hexmask.long.byte 0x00 0.--7. 1. " INTID40 ,Interrupt ID40 Priority/Priority Byte Offset 40 " group.long 0x42C++0x03 line.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11" hexmask.long.byte 0x00 24.--31. 1. " INTID47 ,Interrupt ID47 Priority/Priority Byte Offset 47 " hexmask.long.byte 0x00 16.--23. 1. " INTID46 ,Interrupt ID46 Priority/Priority Byte Offset 46 " hexmask.long.byte 0x00 8.--15. 1. " INTID45 ,Interrupt ID45 Priority/Priority Byte Offset 45 " hexmask.long.byte 0x00 0.--7. 1. " INTID44 ,Interrupt ID44 Priority/Priority Byte Offset 44 " group.long 0x430++0x03 line.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12" hexmask.long.byte 0x00 24.--31. 1. " INTID51 ,Interrupt ID51 Priority/Priority Byte Offset 51 " hexmask.long.byte 0x00 16.--23. 1. " INTID50 ,Interrupt ID50 Priority/Priority Byte Offset 50 " hexmask.long.byte 0x00 8.--15. 1. " INTID49 ,Interrupt ID49 Priority/Priority Byte Offset 49 " hexmask.long.byte 0x00 0.--7. 1. " INTID48 ,Interrupt ID48 Priority/Priority Byte Offset 48 " group.long 0x434++0x03 line.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13" hexmask.long.byte 0x00 24.--31. 1. " INTID55 ,Interrupt ID55 Priority/Priority Byte Offset 55 " hexmask.long.byte 0x00 16.--23. 1. " INTID54 ,Interrupt ID54 Priority/Priority Byte Offset 54 " hexmask.long.byte 0x00 8.--15. 1. " INTID53 ,Interrupt ID53 Priority/Priority Byte Offset 53 " hexmask.long.byte 0x00 0.--7. 1. " INTID52 ,Interrupt ID52 Priority/Priority Byte Offset 52 " group.long 0x438++0x03 line.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14" hexmask.long.byte 0x00 24.--31. 1. " INTID59 ,Interrupt ID59 Priority/Priority Byte Offset 59 " hexmask.long.byte 0x00 16.--23. 1. " INTID58 ,Interrupt ID58 Priority/Priority Byte Offset 58 " hexmask.long.byte 0x00 8.--15. 1. " INTID57 ,Interrupt ID57 Priority/Priority Byte Offset 57 " hexmask.long.byte 0x00 0.--7. 1. " INTID56 ,Interrupt ID56 Priority/Priority Byte Offset 56 " group.long 0x43C++0x03 line.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15" hexmask.long.byte 0x00 24.--31. 1. " INTID63 ,Interrupt ID63 Priority/Priority Byte Offset 63 " hexmask.long.byte 0x00 16.--23. 1. " INTID62 ,Interrupt ID62 Priority/Priority Byte Offset 62 " hexmask.long.byte 0x00 8.--15. 1. " INTID61 ,Interrupt ID61 Priority/Priority Byte Offset 61 " hexmask.long.byte 0x00 0.--7. 1. " INTID60 ,Interrupt ID60 Priority/Priority Byte Offset 60 " else hgroup.long 0x420++0x03 hide.long 0x00 "GICD_IPRIORITYR8,Interrupt Priority Register 8" hgroup.long 0x424++0x03 hide.long 0x00 "GICD_IPRIORITYR9,Interrupt Priority Register 9" hgroup.long 0x428++0x03 hide.long 0x00 "GICD_IPRIORITYR10,Interrupt Priority Register 10" hgroup.long 0x42C++0x03 hide.long 0x00 "GICD_IPRIORITYR11,Interrupt Priority Register 11" hgroup.long 0x430++0x03 hide.long 0x00 "GICD_IPRIORITYR12,Interrupt Priority Register 12" hgroup.long 0x434++0x03 hide.long 0x00 "GICD_IPRIORITYR13,Interrupt Priority Register 13" hgroup.long 0x438++0x03 hide.long 0x00 "GICD_IPRIORITYR14,Interrupt Priority Register 14" hgroup.long 0x43C++0x03 hide.long 0x00 "GICD_IPRIORITYR15,Interrupt Priority Register 15" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x02) group.long 0x440++0x03 line.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16" hexmask.long.byte 0x00 24.--31. 1. " INTID67 ,Interrupt ID67 Priority/Priority Byte Offset 67 " hexmask.long.byte 0x00 16.--23. 1. " INTID66 ,Interrupt ID66 Priority/Priority Byte Offset 66 " hexmask.long.byte 0x00 8.--15. 1. " INTID65 ,Interrupt ID65 Priority/Priority Byte Offset 65 " hexmask.long.byte 0x00 0.--7. 1. " INTID64 ,Interrupt ID64 Priority/Priority Byte Offset 64 " group.long 0x444++0x03 line.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17" hexmask.long.byte 0x00 24.--31. 1. " INTID71 ,Interrupt ID71 Priority/Priority Byte Offset 71 " hexmask.long.byte 0x00 16.--23. 1. " INTID70 ,Interrupt ID70 Priority/Priority Byte Offset 70 " hexmask.long.byte 0x00 8.--15. 1. " INTID69 ,Interrupt ID69 Priority/Priority Byte Offset 69 " hexmask.long.byte 0x00 0.--7. 1. " INTID68 ,Interrupt ID68 Priority/Priority Byte Offset 68 " group.long 0x448++0x03 line.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18" hexmask.long.byte 0x00 24.--31. 1. " INTID75 ,Interrupt ID75 Priority/Priority Byte Offset 75 " hexmask.long.byte 0x00 16.--23. 1. " INTID74 ,Interrupt ID74 Priority/Priority Byte Offset 74 " hexmask.long.byte 0x00 8.--15. 1. " INTID73 ,Interrupt ID73 Priority/Priority Byte Offset 73 " hexmask.long.byte 0x00 0.--7. 1. " INTID72 ,Interrupt ID72 Priority/Priority Byte Offset 72 " group.long 0x44C++0x03 line.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19" hexmask.long.byte 0x00 24.--31. 1. " INTID79 ,Interrupt ID79 Priority/Priority Byte Offset 79 " hexmask.long.byte 0x00 16.--23. 1. " INTID78 ,Interrupt ID78 Priority/Priority Byte Offset 78 " hexmask.long.byte 0x00 8.--15. 1. " INTID77 ,Interrupt ID77 Priority/Priority Byte Offset 77 " hexmask.long.byte 0x00 0.--7. 1. " INTID76 ,Interrupt ID76 Priority/Priority Byte Offset 76 " group.long 0x450++0x03 line.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20" hexmask.long.byte 0x00 24.--31. 1. " INTID83 ,Interrupt ID83 Priority/Priority Byte Offset 83 " hexmask.long.byte 0x00 16.--23. 1. " INTID82 ,Interrupt ID82 Priority/Priority Byte Offset 82 " hexmask.long.byte 0x00 8.--15. 1. " INTID81 ,Interrupt ID81 Priority/Priority Byte Offset 81 " hexmask.long.byte 0x00 0.--7. 1. " INTID80 ,Interrupt ID80 Priority/Priority Byte Offset 80 " group.long 0x454++0x03 line.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21" hexmask.long.byte 0x00 24.--31. 1. " INTID87 ,Interrupt ID87 Priority/Priority Byte Offset 87 " hexmask.long.byte 0x00 16.--23. 1. " INTID86 ,Interrupt ID86 Priority/Priority Byte Offset 86 " hexmask.long.byte 0x00 8.--15. 1. " INTID85 ,Interrupt ID85 Priority/Priority Byte Offset 85 " hexmask.long.byte 0x00 0.--7. 1. " INTID84 ,Interrupt ID84 Priority/Priority Byte Offset 84 " group.long 0x458++0x03 line.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22" hexmask.long.byte 0x00 24.--31. 1. " INTID91 ,Interrupt ID91 Priority/Priority Byte Offset 91 " hexmask.long.byte 0x00 16.--23. 1. " INTID90 ,Interrupt ID90 Priority/Priority Byte Offset 90 " hexmask.long.byte 0x00 8.--15. 1. " INTID89 ,Interrupt ID89 Priority/Priority Byte Offset 89 " hexmask.long.byte 0x00 0.--7. 1. " INTID88 ,Interrupt ID88 Priority/Priority Byte Offset 88 " group.long 0x45C++0x03 line.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23" hexmask.long.byte 0x00 24.--31. 1. " INTID95 ,Interrupt ID95 Priority/Priority Byte Offset 95 " hexmask.long.byte 0x00 16.--23. 1. " INTID94 ,Interrupt ID94 Priority/Priority Byte Offset 94 " hexmask.long.byte 0x00 8.--15. 1. " INTID93 ,Interrupt ID93 Priority/Priority Byte Offset 93 " hexmask.long.byte 0x00 0.--7. 1. " INTID92 ,Interrupt ID92 Priority/Priority Byte Offset 92 " else hgroup.long 0x440++0x03 hide.long 0x00 "GICD_IPRIORITYR16,Interrupt Priority Register 16" hgroup.long 0x444++0x03 hide.long 0x00 "GICD_IPRIORITYR17,Interrupt Priority Register 17" hgroup.long 0x448++0x03 hide.long 0x00 "GICD_IPRIORITYR18,Interrupt Priority Register 18" hgroup.long 0x44C++0x03 hide.long 0x00 "GICD_IPRIORITYR19,Interrupt Priority Register 19" hgroup.long 0x450++0x03 hide.long 0x00 "GICD_IPRIORITYR20,Interrupt Priority Register 20" hgroup.long 0x454++0x03 hide.long 0x00 "GICD_IPRIORITYR21,Interrupt Priority Register 21" hgroup.long 0x458++0x03 hide.long 0x00 "GICD_IPRIORITYR22,Interrupt Priority Register 22" hgroup.long 0x45C++0x03 hide.long 0x00 "GICD_IPRIORITYR23,Interrupt Priority Register 23" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x03) group.long 0x460++0x03 line.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24" hexmask.long.byte 0x00 24.--31. 1. " INTID99 ,Interrupt ID99 Priority/Priority Byte Offset 99 " hexmask.long.byte 0x00 16.--23. 1. " INTID98 ,Interrupt ID98 Priority/Priority Byte Offset 98 " hexmask.long.byte 0x00 8.--15. 1. " INTID97 ,Interrupt ID97 Priority/Priority Byte Offset 97 " hexmask.long.byte 0x00 0.--7. 1. " INTID96 ,Interrupt ID96 Priority/Priority Byte Offset 96 " group.long 0x464++0x03 line.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25" hexmask.long.byte 0x00 24.--31. 1. " INTID103 ,Interrupt ID103 Priority/Priority Byte Offset 103 " hexmask.long.byte 0x00 16.--23. 1. " INTID102 ,Interrupt ID102 Priority/Priority Byte Offset 102 " hexmask.long.byte 0x00 8.--15. 1. " INTID101 ,Interrupt ID101 Priority/Priority Byte Offset 101 " hexmask.long.byte 0x00 0.--7. 1. " INTID100 ,Interrupt ID100 Priority/Priority Byte Offset 100 " group.long 0x468++0x03 line.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26" hexmask.long.byte 0x00 24.--31. 1. " INTID107 ,Interrupt ID107 Priority/Priority Byte Offset 107 " hexmask.long.byte 0x00 16.--23. 1. " INTID106 ,Interrupt ID106 Priority/Priority Byte Offset 106 " hexmask.long.byte 0x00 8.--15. 1. " INTID105 ,Interrupt ID105 Priority/Priority Byte Offset 105 " hexmask.long.byte 0x00 0.--7. 1. " INTID104 ,Interrupt ID104 Priority/Priority Byte Offset 104 " group.long 0x46C++0x03 line.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27" hexmask.long.byte 0x00 24.--31. 1. " INTID111 ,Interrupt ID111 Priority/Priority Byte Offset 111 " hexmask.long.byte 0x00 16.--23. 1. " INTID110 ,Interrupt ID110 Priority/Priority Byte Offset 110 " hexmask.long.byte 0x00 8.--15. 1. " INTID109 ,Interrupt ID109 Priority/Priority Byte Offset 109 " hexmask.long.byte 0x00 0.--7. 1. " INTID108 ,Interrupt ID108 Priority/Priority Byte Offset 108 " group.long 0x470++0x03 line.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28" hexmask.long.byte 0x00 24.--31. 1. " INTID115 ,Interrupt ID115 Priority/Priority Byte Offset 115 " hexmask.long.byte 0x00 16.--23. 1. " INTID114 ,Interrupt ID114 Priority/Priority Byte Offset 114 " hexmask.long.byte 0x00 8.--15. 1. " INTID113 ,Interrupt ID113 Priority/Priority Byte Offset 113 " hexmask.long.byte 0x00 0.--7. 1. " INTID112 ,Interrupt ID112 Priority/Priority Byte Offset 112 " group.long 0x474++0x03 line.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29" hexmask.long.byte 0x00 24.--31. 1. " INTID119 ,Interrupt ID119 Priority/Priority Byte Offset 119 " hexmask.long.byte 0x00 16.--23. 1. " INTID118 ,Interrupt ID118 Priority/Priority Byte Offset 118 " hexmask.long.byte 0x00 8.--15. 1. " INTID117 ,Interrupt ID117 Priority/Priority Byte Offset 117 " hexmask.long.byte 0x00 0.--7. 1. " INTID116 ,Interrupt ID116 Priority/Priority Byte Offset 116 " group.long 0x478++0x03 line.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30" hexmask.long.byte 0x00 24.--31. 1. " INTID123 ,Interrupt ID123 Priority/Priority Byte Offset 123 " hexmask.long.byte 0x00 16.--23. 1. " INTID122 ,Interrupt ID122 Priority/Priority Byte Offset 122 " hexmask.long.byte 0x00 8.--15. 1. " INTID121 ,Interrupt ID121 Priority/Priority Byte Offset 121 " hexmask.long.byte 0x00 0.--7. 1. " INTID120 ,Interrupt ID120 Priority/Priority Byte Offset 120 " group.long 0x47C++0x03 line.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31" hexmask.long.byte 0x00 24.--31. 1. " INTID127 ,Interrupt ID127 Priority/Priority Byte Offset 127 " hexmask.long.byte 0x00 16.--23. 1. " INTID126 ,Interrupt ID126 Priority/Priority Byte Offset 126 " hexmask.long.byte 0x00 8.--15. 1. " INTID125 ,Interrupt ID125 Priority/Priority Byte Offset 125 " hexmask.long.byte 0x00 0.--7. 1. " INTID124 ,Interrupt ID124 Priority/Priority Byte Offset 124 " else hgroup.long 0x460++0x03 hide.long 0x00 "GICD_IPRIORITYR24,Interrupt Priority Register 24" hgroup.long 0x464++0x03 hide.long 0x00 "GICD_IPRIORITYR25,Interrupt Priority Register 25" hgroup.long 0x468++0x03 hide.long 0x00 "GICD_IPRIORITYR26,Interrupt Priority Register 26" hgroup.long 0x46C++0x03 hide.long 0x00 "GICD_IPRIORITYR27,Interrupt Priority Register 27" hgroup.long 0x470++0x03 hide.long 0x00 "GICD_IPRIORITYR28,Interrupt Priority Register 28" hgroup.long 0x474++0x03 hide.long 0x00 "GICD_IPRIORITYR29,Interrupt Priority Register 29" hgroup.long 0x478++0x03 hide.long 0x00 "GICD_IPRIORITYR30,Interrupt Priority Register 30" hgroup.long 0x47C++0x03 hide.long 0x00 "GICD_IPRIORITYR31,Interrupt Priority Register 31" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x04) group.long 0x480++0x03 line.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32" hexmask.long.byte 0x00 24.--31. 1. " INTID131 ,Interrupt ID131 Priority/Priority Byte Offset 131 " hexmask.long.byte 0x00 16.--23. 1. " INTID130 ,Interrupt ID130 Priority/Priority Byte Offset 130 " hexmask.long.byte 0x00 8.--15. 1. " INTID129 ,Interrupt ID129 Priority/Priority Byte Offset 129 " hexmask.long.byte 0x00 0.--7. 1. " INTID128 ,Interrupt ID128 Priority/Priority Byte Offset 128 " group.long 0x484++0x03 line.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33" hexmask.long.byte 0x00 24.--31. 1. " INTID135 ,Interrupt ID135 Priority/Priority Byte Offset 135 " hexmask.long.byte 0x00 16.--23. 1. " INTID134 ,Interrupt ID134 Priority/Priority Byte Offset 134 " hexmask.long.byte 0x00 8.--15. 1. " INTID133 ,Interrupt ID133 Priority/Priority Byte Offset 133 " hexmask.long.byte 0x00 0.--7. 1. " INTID132 ,Interrupt ID132 Priority/Priority Byte Offset 132 " group.long 0x488++0x03 line.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34" hexmask.long.byte 0x00 24.--31. 1. " INTID139 ,Interrupt ID139 Priority/Priority Byte Offset 139 " hexmask.long.byte 0x00 16.--23. 1. " INTID138 ,Interrupt ID138 Priority/Priority Byte Offset 138 " hexmask.long.byte 0x00 8.--15. 1. " INTID137 ,Interrupt ID137 Priority/Priority Byte Offset 137 " hexmask.long.byte 0x00 0.--7. 1. " INTID136 ,Interrupt ID136 Priority/Priority Byte Offset 136 " group.long 0x48C++0x03 line.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35" hexmask.long.byte 0x00 24.--31. 1. " INTID143 ,Interrupt ID143 Priority/Priority Byte Offset 143 " hexmask.long.byte 0x00 16.--23. 1. " INTID142 ,Interrupt ID142 Priority/Priority Byte Offset 142 " hexmask.long.byte 0x00 8.--15. 1. " INTID141 ,Interrupt ID141 Priority/Priority Byte Offset 141 " hexmask.long.byte 0x00 0.--7. 1. " INTID140 ,Interrupt ID140 Priority/Priority Byte Offset 140 " group.long 0x490++0x03 line.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36" hexmask.long.byte 0x00 24.--31. 1. " INTID147 ,Interrupt ID147 Priority/Priority Byte Offset 147 " hexmask.long.byte 0x00 16.--23. 1. " INTID146 ,Interrupt ID146 Priority/Priority Byte Offset 146 " hexmask.long.byte 0x00 8.--15. 1. " INTID145 ,Interrupt ID145 Priority/Priority Byte Offset 145 " hexmask.long.byte 0x00 0.--7. 1. " INTID144 ,Interrupt ID144 Priority/Priority Byte Offset 144 " group.long 0x494++0x03 line.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37" hexmask.long.byte 0x00 24.--31. 1. " INTID151 ,Interrupt ID151 Priority/Priority Byte Offset 151 " hexmask.long.byte 0x00 16.--23. 1. " INTID150 ,Interrupt ID150 Priority/Priority Byte Offset 150 " hexmask.long.byte 0x00 8.--15. 1. " INTID149 ,Interrupt ID149 Priority/Priority Byte Offset 149 " hexmask.long.byte 0x00 0.--7. 1. " INTID148 ,Interrupt ID148 Priority/Priority Byte Offset 148 " group.long 0x498++0x03 line.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38" hexmask.long.byte 0x00 24.--31. 1. " INTID155 ,Interrupt ID155 Priority/Priority Byte Offset 155 " hexmask.long.byte 0x00 16.--23. 1. " INTID154 ,Interrupt ID154 Priority/Priority Byte Offset 154 " hexmask.long.byte 0x00 8.--15. 1. " INTID153 ,Interrupt ID153 Priority/Priority Byte Offset 153 " hexmask.long.byte 0x00 0.--7. 1. " INTID152 ,Interrupt ID152 Priority/Priority Byte Offset 152 " group.long 0x49C++0x03 line.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39" hexmask.long.byte 0x00 24.--31. 1. " INTID159 ,Interrupt ID159 Priority/Priority Byte Offset 159 " hexmask.long.byte 0x00 16.--23. 1. " INTID158 ,Interrupt ID158 Priority/Priority Byte Offset 158 " hexmask.long.byte 0x00 8.--15. 1. " INTID157 ,Interrupt ID157 Priority/Priority Byte Offset 157 " hexmask.long.byte 0x00 0.--7. 1. " INTID156 ,Interrupt ID156 Priority/Priority Byte Offset 156 " else hgroup.long 0x480++0x03 hide.long 0x00 "GICD_IPRIORITYR32,Interrupt Priority Register 32" hgroup.long 0x484++0x03 hide.long 0x00 "GICD_IPRIORITYR33,Interrupt Priority Register 33" hgroup.long 0x488++0x03 hide.long 0x00 "GICD_IPRIORITYR34,Interrupt Priority Register 34" hgroup.long 0x48C++0x03 hide.long 0x00 "GICD_IPRIORITYR35,Interrupt Priority Register 35" hgroup.long 0x490++0x03 hide.long 0x00 "GICD_IPRIORITYR36,Interrupt Priority Register 36" hgroup.long 0x494++0x03 hide.long 0x00 "GICD_IPRIORITYR37,Interrupt Priority Register 37" hgroup.long 0x498++0x03 hide.long 0x00 "GICD_IPRIORITYR38,Interrupt Priority Register 38" hgroup.long 0x49C++0x03 hide.long 0x00 "GICD_IPRIORITYR39,Interrupt Priority Register 39" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x05) group.long 0x4A0++0x03 line.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40" hexmask.long.byte 0x00 24.--31. 1. " INTID163 ,Interrupt ID163 Priority/Priority Byte Offset 163 " hexmask.long.byte 0x00 16.--23. 1. " INTID162 ,Interrupt ID162 Priority/Priority Byte Offset 162 " hexmask.long.byte 0x00 8.--15. 1. " INTID161 ,Interrupt ID161 Priority/Priority Byte Offset 161 " hexmask.long.byte 0x00 0.--7. 1. " INTID160 ,Interrupt ID160 Priority/Priority Byte Offset 160 " group.long 0x4A4++0x03 line.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41" hexmask.long.byte 0x00 24.--31. 1. " INTID167 ,Interrupt ID167 Priority/Priority Byte Offset 167 " hexmask.long.byte 0x00 16.--23. 1. " INTID166 ,Interrupt ID166 Priority/Priority Byte Offset 166 " hexmask.long.byte 0x00 8.--15. 1. " INTID165 ,Interrupt ID165 Priority/Priority Byte Offset 165 " hexmask.long.byte 0x00 0.--7. 1. " INTID164 ,Interrupt ID164 Priority/Priority Byte Offset 164 " group.long 0x4A8++0x03 line.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42" hexmask.long.byte 0x00 24.--31. 1. " INTID171 ,Interrupt ID171 Priority/Priority Byte Offset 171 " hexmask.long.byte 0x00 16.--23. 1. " INTID170 ,Interrupt ID170 Priority/Priority Byte Offset 170 " hexmask.long.byte 0x00 8.--15. 1. " INTID169 ,Interrupt ID169 Priority/Priority Byte Offset 169 " hexmask.long.byte 0x00 0.--7. 1. " INTID168 ,Interrupt ID168 Priority/Priority Byte Offset 168 " group.long 0x4AC++0x03 line.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43" hexmask.long.byte 0x00 24.--31. 1. " INTID175 ,Interrupt ID175 Priority/Priority Byte Offset 175 " hexmask.long.byte 0x00 16.--23. 1. " INTID174 ,Interrupt ID174 Priority/Priority Byte Offset 174 " hexmask.long.byte 0x00 8.--15. 1. " INTID173 ,Interrupt ID173 Priority/Priority Byte Offset 173 " hexmask.long.byte 0x00 0.--7. 1. " INTID172 ,Interrupt ID172 Priority/Priority Byte Offset 172 " group.long 0x4B0++0x03 line.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44" hexmask.long.byte 0x00 24.--31. 1. " INTID179 ,Interrupt ID179 Priority/Priority Byte Offset 179 " hexmask.long.byte 0x00 16.--23. 1. " INTID178 ,Interrupt ID178 Priority/Priority Byte Offset 178 " hexmask.long.byte 0x00 8.--15. 1. " INTID177 ,Interrupt ID177 Priority/Priority Byte Offset 177 " hexmask.long.byte 0x00 0.--7. 1. " INTID176 ,Interrupt ID176 Priority/Priority Byte Offset 176 " group.long 0x4B4++0x03 line.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45" hexmask.long.byte 0x00 24.--31. 1. " INTID183 ,Interrupt ID183 Priority/Priority Byte Offset 183 " hexmask.long.byte 0x00 16.--23. 1. " INTID182 ,Interrupt ID182 Priority/Priority Byte Offset 182 " hexmask.long.byte 0x00 8.--15. 1. " INTID181 ,Interrupt ID181 Priority/Priority Byte Offset 181 " hexmask.long.byte 0x00 0.--7. 1. " INTID180 ,Interrupt ID180 Priority/Priority Byte Offset 180 " group.long 0x4B8++0x03 line.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46" hexmask.long.byte 0x00 24.--31. 1. " INTID187 ,Interrupt ID187 Priority/Priority Byte Offset 187 " hexmask.long.byte 0x00 16.--23. 1. " INTID186 ,Interrupt ID186 Priority/Priority Byte Offset 186 " hexmask.long.byte 0x00 8.--15. 1. " INTID185 ,Interrupt ID185 Priority/Priority Byte Offset 185 " hexmask.long.byte 0x00 0.--7. 1. " INTID184 ,Interrupt ID184 Priority/Priority Byte Offset 184 " group.long 0x4BC++0x03 line.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47" hexmask.long.byte 0x00 24.--31. 1. " INTID191 ,Interrupt ID191 Priority/Priority Byte Offset 191 " hexmask.long.byte 0x00 16.--23. 1. " INTID190 ,Interrupt ID190 Priority/Priority Byte Offset 190 " hexmask.long.byte 0x00 8.--15. 1. " INTID189 ,Interrupt ID189 Priority/Priority Byte Offset 189 " hexmask.long.byte 0x00 0.--7. 1. " INTID188 ,Interrupt ID188 Priority/Priority Byte Offset 188 " else hgroup.long 0x4A0++0x03 hide.long 0x00 "GICD_IPRIORITYR40,Interrupt Priority Register 40" hgroup.long 0x4A4++0x03 hide.long 0x00 "GICD_IPRIORITYR41,Interrupt Priority Register 41" hgroup.long 0x4A8++0x03 hide.long 0x00 "GICD_IPRIORITYR42,Interrupt Priority Register 42" hgroup.long 0x4AC++0x03 hide.long 0x00 "GICD_IPRIORITYR43,Interrupt Priority Register 43" hgroup.long 0x4B0++0x03 hide.long 0x00 "GICD_IPRIORITYR44,Interrupt Priority Register 44" hgroup.long 0x4B4++0x03 hide.long 0x00 "GICD_IPRIORITYR45,Interrupt Priority Register 45" hgroup.long 0x4B8++0x03 hide.long 0x00 "GICD_IPRIORITYR46,Interrupt Priority Register 46" hgroup.long 0x4BC++0x03 hide.long 0x00 "GICD_IPRIORITYR47,Interrupt Priority Register 47" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x06) group.long 0x4C0++0x03 line.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48" hexmask.long.byte 0x00 24.--31. 1. " INTID195 ,Interrupt ID195 Priority/Priority Byte Offset 195 " hexmask.long.byte 0x00 16.--23. 1. " INTID194 ,Interrupt ID194 Priority/Priority Byte Offset 194 " hexmask.long.byte 0x00 8.--15. 1. " INTID193 ,Interrupt ID193 Priority/Priority Byte Offset 193 " hexmask.long.byte 0x00 0.--7. 1. " INTID192 ,Interrupt ID192 Priority/Priority Byte Offset 192 " group.long 0x4C4++0x03 line.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49" hexmask.long.byte 0x00 24.--31. 1. " INTID199 ,Interrupt ID199 Priority/Priority Byte Offset 199 " hexmask.long.byte 0x00 16.--23. 1. " INTID198 ,Interrupt ID198 Priority/Priority Byte Offset 198 " hexmask.long.byte 0x00 8.--15. 1. " INTID197 ,Interrupt ID197 Priority/Priority Byte Offset 197 " hexmask.long.byte 0x00 0.--7. 1. " INTID196 ,Interrupt ID196 Priority/Priority Byte Offset 196 " group.long 0x4C8++0x03 line.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50" hexmask.long.byte 0x00 24.--31. 1. " INTID203 ,Interrupt ID203 Priority/Priority Byte Offset 203 " hexmask.long.byte 0x00 16.--23. 1. " INTID202 ,Interrupt ID202 Priority/Priority Byte Offset 202 " hexmask.long.byte 0x00 8.--15. 1. " INTID201 ,Interrupt ID201 Priority/Priority Byte Offset 201 " hexmask.long.byte 0x00 0.--7. 1. " INTID200 ,Interrupt ID200 Priority/Priority Byte Offset 200 " group.long 0x4CC++0x03 line.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51" hexmask.long.byte 0x00 24.--31. 1. " INTID207 ,Interrupt ID207 Priority/Priority Byte Offset 207 " hexmask.long.byte 0x00 16.--23. 1. " INTID206 ,Interrupt ID206 Priority/Priority Byte Offset 206 " hexmask.long.byte 0x00 8.--15. 1. " INTID205 ,Interrupt ID205 Priority/Priority Byte Offset 205 " hexmask.long.byte 0x00 0.--7. 1. " INTID204 ,Interrupt ID204 Priority/Priority Byte Offset 204 " group.long 0x4D0++0x03 line.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52" hexmask.long.byte 0x00 24.--31. 1. " INTID211 ,Interrupt ID211 Priority/Priority Byte Offset 211 " hexmask.long.byte 0x00 16.--23. 1. " INTID210 ,Interrupt ID210 Priority/Priority Byte Offset 210 " hexmask.long.byte 0x00 8.--15. 1. " INTID209 ,Interrupt ID209 Priority/Priority Byte Offset 209 " hexmask.long.byte 0x00 0.--7. 1. " INTID208 ,Interrupt ID208 Priority/Priority Byte Offset 208 " group.long 0x4D4++0x03 line.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53" hexmask.long.byte 0x00 24.--31. 1. " INTID215 ,Interrupt ID215 Priority/Priority Byte Offset 215 " hexmask.long.byte 0x00 16.--23. 1. " INTID214 ,Interrupt ID214 Priority/Priority Byte Offset 214 " hexmask.long.byte 0x00 8.--15. 1. " INTID213 ,Interrupt ID213 Priority/Priority Byte Offset 213 " hexmask.long.byte 0x00 0.--7. 1. " INTID212 ,Interrupt ID212 Priority/Priority Byte Offset 212 " group.long 0x4D8++0x03 line.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54" hexmask.long.byte 0x00 24.--31. 1. " INTID219 ,Interrupt ID219 Priority/Priority Byte Offset 219 " hexmask.long.byte 0x00 16.--23. 1. " INTID218 ,Interrupt ID218 Priority/Priority Byte Offset 218 " hexmask.long.byte 0x00 8.--15. 1. " INTID217 ,Interrupt ID217 Priority/Priority Byte Offset 217 " hexmask.long.byte 0x00 0.--7. 1. " INTID216 ,Interrupt ID216 Priority/Priority Byte Offset 216 " group.long 0x4DC++0x03 line.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55" hexmask.long.byte 0x00 24.--31. 1. " INTID223 ,Interrupt ID223 Priority/Priority Byte Offset 223 " hexmask.long.byte 0x00 16.--23. 1. " INTID222 ,Interrupt ID222 Priority/Priority Byte Offset 222 " hexmask.long.byte 0x00 8.--15. 1. " INTID221 ,Interrupt ID221 Priority/Priority Byte Offset 221 " hexmask.long.byte 0x00 0.--7. 1. " INTID220 ,Interrupt ID220 Priority/Priority Byte Offset 220 " else hgroup.long 0x4C0++0x03 hide.long 0x00 "GICD_IPRIORITYR48,Interrupt Priority Register 48" hgroup.long 0x4C4++0x03 hide.long 0x00 "GICD_IPRIORITYR49,Interrupt Priority Register 49" hgroup.long 0x4C8++0x03 hide.long 0x00 "GICD_IPRIORITYR50,Interrupt Priority Register 50" hgroup.long 0x4CC++0x03 hide.long 0x00 "GICD_IPRIORITYR51,Interrupt Priority Register 51" hgroup.long 0x4D0++0x03 hide.long 0x00 "GICD_IPRIORITYR52,Interrupt Priority Register 52" hgroup.long 0x4D4++0x03 hide.long 0x00 "GICD_IPRIORITYR53,Interrupt Priority Register 53" hgroup.long 0x4D8++0x03 hide.long 0x00 "GICD_IPRIORITYR54,Interrupt Priority Register 54" hgroup.long 0x4DC++0x03 hide.long 0x00 "GICD_IPRIORITYR55,Interrupt Priority Register 55" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x07) group.long 0x4E0++0x03 line.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56" hexmask.long.byte 0x00 24.--31. 1. " INTID227 ,Interrupt ID227 Priority/Priority Byte Offset 227 " hexmask.long.byte 0x00 16.--23. 1. " INTID226 ,Interrupt ID226 Priority/Priority Byte Offset 226 " hexmask.long.byte 0x00 8.--15. 1. " INTID225 ,Interrupt ID225 Priority/Priority Byte Offset 225 " hexmask.long.byte 0x00 0.--7. 1. " INTID224 ,Interrupt ID224 Priority/Priority Byte Offset 224 " group.long 0x4E4++0x03 line.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57" hexmask.long.byte 0x00 24.--31. 1. " INTID231 ,Interrupt ID231 Priority/Priority Byte Offset 231 " hexmask.long.byte 0x00 16.--23. 1. " INTID230 ,Interrupt ID230 Priority/Priority Byte Offset 230 " hexmask.long.byte 0x00 8.--15. 1. " INTID229 ,Interrupt ID229 Priority/Priority Byte Offset 229 " hexmask.long.byte 0x00 0.--7. 1. " INTID228 ,Interrupt ID228 Priority/Priority Byte Offset 228 " group.long 0x4E8++0x03 line.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58" hexmask.long.byte 0x00 24.--31. 1. " INTID235 ,Interrupt ID235 Priority/Priority Byte Offset 235 " hexmask.long.byte 0x00 16.--23. 1. " INTID234 ,Interrupt ID234 Priority/Priority Byte Offset 234 " hexmask.long.byte 0x00 8.--15. 1. " INTID233 ,Interrupt ID233 Priority/Priority Byte Offset 233 " hexmask.long.byte 0x00 0.--7. 1. " INTID232 ,Interrupt ID232 Priority/Priority Byte Offset 232 " group.long 0x4EC++0x03 line.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59" hexmask.long.byte 0x00 24.--31. 1. " INTID239 ,Interrupt ID239 Priority/Priority Byte Offset 239 " hexmask.long.byte 0x00 16.--23. 1. " INTID238 ,Interrupt ID238 Priority/Priority Byte Offset 238 " hexmask.long.byte 0x00 8.--15. 1. " INTID237 ,Interrupt ID237 Priority/Priority Byte Offset 237 " hexmask.long.byte 0x00 0.--7. 1. " INTID236 ,Interrupt ID236 Priority/Priority Byte Offset 236 " group.long 0x4F0++0x03 line.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60" hexmask.long.byte 0x00 24.--31. 1. " INTID243 ,Interrupt ID243 Priority/Priority Byte Offset 243 " hexmask.long.byte 0x00 16.--23. 1. " INTID242 ,Interrupt ID242 Priority/Priority Byte Offset 242 " hexmask.long.byte 0x00 8.--15. 1. " INTID241 ,Interrupt ID241 Priority/Priority Byte Offset 241 " hexmask.long.byte 0x00 0.--7. 1. " INTID240 ,Interrupt ID240 Priority/Priority Byte Offset 240 " group.long 0x4F4++0x03 line.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61" hexmask.long.byte 0x00 24.--31. 1. " INTID247 ,Interrupt ID247 Priority/Priority Byte Offset 247 " hexmask.long.byte 0x00 16.--23. 1. " INTID246 ,Interrupt ID246 Priority/Priority Byte Offset 246 " hexmask.long.byte 0x00 8.--15. 1. " INTID245 ,Interrupt ID245 Priority/Priority Byte Offset 245 " hexmask.long.byte 0x00 0.--7. 1. " INTID244 ,Interrupt ID244 Priority/Priority Byte Offset 244 " group.long 0x4F8++0x03 line.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62" hexmask.long.byte 0x00 24.--31. 1. " INTID251 ,Interrupt ID251 Priority/Priority Byte Offset 251 " hexmask.long.byte 0x00 16.--23. 1. " INTID250 ,Interrupt ID250 Priority/Priority Byte Offset 250 " hexmask.long.byte 0x00 8.--15. 1. " INTID249 ,Interrupt ID249 Priority/Priority Byte Offset 249 " hexmask.long.byte 0x00 0.--7. 1. " INTID248 ,Interrupt ID248 Priority/Priority Byte Offset 248 " group.long 0x4FC++0x03 line.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63" hexmask.long.byte 0x00 24.--31. 1. " INTID255 ,Interrupt ID255 Priority/Priority Byte Offset 255 " hexmask.long.byte 0x00 16.--23. 1. " INTID254 ,Interrupt ID254 Priority/Priority Byte Offset 254 " hexmask.long.byte 0x00 8.--15. 1. " INTID253 ,Interrupt ID253 Priority/Priority Byte Offset 253 " hexmask.long.byte 0x00 0.--7. 1. " INTID252 ,Interrupt ID252 Priority/Priority Byte Offset 252 " else hgroup.long 0x4E0++0x03 hide.long 0x00 "GICD_IPRIORITYR56,Interrupt Priority Register 56" hgroup.long 0x4E4++0x03 hide.long 0x00 "GICD_IPRIORITYR57,Interrupt Priority Register 57" hgroup.long 0x4E8++0x03 hide.long 0x00 "GICD_IPRIORITYR58,Interrupt Priority Register 58" hgroup.long 0x4EC++0x03 hide.long 0x00 "GICD_IPRIORITYR59,Interrupt Priority Register 59" hgroup.long 0x4F0++0x03 hide.long 0x00 "GICD_IPRIORITYR60,Interrupt Priority Register 60" hgroup.long 0x4F4++0x03 hide.long 0x00 "GICD_IPRIORITYR61,Interrupt Priority Register 61" hgroup.long 0x4F8++0x03 hide.long 0x00 "GICD_IPRIORITYR62,Interrupt Priority Register 62" hgroup.long 0x4FC++0x03 hide.long 0x00 "GICD_IPRIORITYR63,Interrupt Priority Register 63" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x08) group.long 0x500++0x03 line.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64" hexmask.long.byte 0x00 24.--31. 1. " INTID259 ,Interrupt ID259 Priority/Priority Byte Offset 259 " hexmask.long.byte 0x00 16.--23. 1. " INTID258 ,Interrupt ID258 Priority/Priority Byte Offset 258 " hexmask.long.byte 0x00 8.--15. 1. " INTID257 ,Interrupt ID257 Priority/Priority Byte Offset 257 " hexmask.long.byte 0x00 0.--7. 1. " INTID256 ,Interrupt ID256 Priority/Priority Byte Offset 256 " group.long 0x504++0x03 line.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65" hexmask.long.byte 0x00 24.--31. 1. " INTID263 ,Interrupt ID263 Priority/Priority Byte Offset 263 " hexmask.long.byte 0x00 16.--23. 1. " INTID262 ,Interrupt ID262 Priority/Priority Byte Offset 262 " hexmask.long.byte 0x00 8.--15. 1. " INTID261 ,Interrupt ID261 Priority/Priority Byte Offset 261 " hexmask.long.byte 0x00 0.--7. 1. " INTID260 ,Interrupt ID260 Priority/Priority Byte Offset 260 " group.long 0x508++0x03 line.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66" hexmask.long.byte 0x00 24.--31. 1. " INTID267 ,Interrupt ID267 Priority/Priority Byte Offset 267 " hexmask.long.byte 0x00 16.--23. 1. " INTID266 ,Interrupt ID266 Priority/Priority Byte Offset 266 " hexmask.long.byte 0x00 8.--15. 1. " INTID265 ,Interrupt ID265 Priority/Priority Byte Offset 265 " hexmask.long.byte 0x00 0.--7. 1. " INTID264 ,Interrupt ID264 Priority/Priority Byte Offset 264 " group.long 0x50C++0x03 line.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67" hexmask.long.byte 0x00 24.--31. 1. " INTID271 ,Interrupt ID271 Priority/Priority Byte Offset 271 " hexmask.long.byte 0x00 16.--23. 1. " INTID270 ,Interrupt ID270 Priority/Priority Byte Offset 270 " hexmask.long.byte 0x00 8.--15. 1. " INTID269 ,Interrupt ID269 Priority/Priority Byte Offset 269 " hexmask.long.byte 0x00 0.--7. 1. " INTID268 ,Interrupt ID268 Priority/Priority Byte Offset 268 " group.long 0x510++0x03 line.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68" hexmask.long.byte 0x00 24.--31. 1. " INTID275 ,Interrupt ID275 Priority/Priority Byte Offset 275 " hexmask.long.byte 0x00 16.--23. 1. " INTID274 ,Interrupt ID274 Priority/Priority Byte Offset 274 " hexmask.long.byte 0x00 8.--15. 1. " INTID273 ,Interrupt ID273 Priority/Priority Byte Offset 273 " hexmask.long.byte 0x00 0.--7. 1. " INTID272 ,Interrupt ID272 Priority/Priority Byte Offset 272 " group.long 0x514++0x03 line.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69" hexmask.long.byte 0x00 24.--31. 1. " INTID279 ,Interrupt ID279 Priority/Priority Byte Offset 279 " hexmask.long.byte 0x00 16.--23. 1. " INTID278 ,Interrupt ID278 Priority/Priority Byte Offset 278 " hexmask.long.byte 0x00 8.--15. 1. " INTID277 ,Interrupt ID277 Priority/Priority Byte Offset 277 " hexmask.long.byte 0x00 0.--7. 1. " INTID276 ,Interrupt ID276 Priority/Priority Byte Offset 276 " group.long 0x518++0x03 line.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70" hexmask.long.byte 0x00 24.--31. 1. " INTID283 ,Interrupt ID283 Priority/Priority Byte Offset 283 " hexmask.long.byte 0x00 16.--23. 1. " INTID282 ,Interrupt ID282 Priority/Priority Byte Offset 282 " hexmask.long.byte 0x00 8.--15. 1. " INTID281 ,Interrupt ID281 Priority/Priority Byte Offset 281 " hexmask.long.byte 0x00 0.--7. 1. " INTID280 ,Interrupt ID280 Priority/Priority Byte Offset 280 " group.long 0x51C++0x03 line.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71" hexmask.long.byte 0x00 24.--31. 1. " INTID287 ,Interrupt ID287 Priority/Priority Byte Offset 287 " hexmask.long.byte 0x00 16.--23. 1. " INTID286 ,Interrupt ID286 Priority/Priority Byte Offset 286 " hexmask.long.byte 0x00 8.--15. 1. " INTID285 ,Interrupt ID285 Priority/Priority Byte Offset 285 " hexmask.long.byte 0x00 0.--7. 1. " INTID284 ,Interrupt ID284 Priority/Priority Byte Offset 284 " else hgroup.long 0x500++0x03 hide.long 0x00 "GICD_IPRIORITYR64,Interrupt Priority Register 64" hgroup.long 0x504++0x03 hide.long 0x00 "GICD_IPRIORITYR65,Interrupt Priority Register 65" hgroup.long 0x508++0x03 hide.long 0x00 "GICD_IPRIORITYR66,Interrupt Priority Register 66" hgroup.long 0x50C++0x03 hide.long 0x00 "GICD_IPRIORITYR67,Interrupt Priority Register 67" hgroup.long 0x510++0x03 hide.long 0x00 "GICD_IPRIORITYR68,Interrupt Priority Register 68" hgroup.long 0x514++0x03 hide.long 0x00 "GICD_IPRIORITYR69,Interrupt Priority Register 69" hgroup.long 0x518++0x03 hide.long 0x00 "GICD_IPRIORITYR70,Interrupt Priority Register 70" hgroup.long 0x51C++0x03 hide.long 0x00 "GICD_IPRIORITYR71,Interrupt Priority Register 71" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x09) group.long 0x520++0x03 line.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72" hexmask.long.byte 0x00 24.--31. 1. " INTID291 ,Interrupt ID291 Priority/Priority Byte Offset 291 " hexmask.long.byte 0x00 16.--23. 1. " INTID290 ,Interrupt ID290 Priority/Priority Byte Offset 290 " hexmask.long.byte 0x00 8.--15. 1. " INTID289 ,Interrupt ID289 Priority/Priority Byte Offset 289 " hexmask.long.byte 0x00 0.--7. 1. " INTID288 ,Interrupt ID288 Priority/Priority Byte Offset 288 " group.long 0x524++0x03 line.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73" hexmask.long.byte 0x00 24.--31. 1. " INTID295 ,Interrupt ID295 Priority/Priority Byte Offset 295 " hexmask.long.byte 0x00 16.--23. 1. " INTID294 ,Interrupt ID294 Priority/Priority Byte Offset 294 " hexmask.long.byte 0x00 8.--15. 1. " INTID293 ,Interrupt ID293 Priority/Priority Byte Offset 293 " hexmask.long.byte 0x00 0.--7. 1. " INTID292 ,Interrupt ID292 Priority/Priority Byte Offset 292 " group.long 0x528++0x03 line.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74" hexmask.long.byte 0x00 24.--31. 1. " INTID299 ,Interrupt ID299 Priority/Priority Byte Offset 299 " hexmask.long.byte 0x00 16.--23. 1. " INTID298 ,Interrupt ID298 Priority/Priority Byte Offset 298 " hexmask.long.byte 0x00 8.--15. 1. " INTID297 ,Interrupt ID297 Priority/Priority Byte Offset 297 " hexmask.long.byte 0x00 0.--7. 1. " INTID296 ,Interrupt ID296 Priority/Priority Byte Offset 296 " group.long 0x52C++0x03 line.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75" hexmask.long.byte 0x00 24.--31. 1. " INTID303 ,Interrupt ID303 Priority/Priority Byte Offset 303 " hexmask.long.byte 0x00 16.--23. 1. " INTID302 ,Interrupt ID302 Priority/Priority Byte Offset 302 " hexmask.long.byte 0x00 8.--15. 1. " INTID301 ,Interrupt ID301 Priority/Priority Byte Offset 301 " hexmask.long.byte 0x00 0.--7. 1. " INTID300 ,Interrupt ID300 Priority/Priority Byte Offset 300 " group.long 0x530++0x03 line.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76" hexmask.long.byte 0x00 24.--31. 1. " INTID307 ,Interrupt ID307 Priority/Priority Byte Offset 307 " hexmask.long.byte 0x00 16.--23. 1. " INTID306 ,Interrupt ID306 Priority/Priority Byte Offset 306 " hexmask.long.byte 0x00 8.--15. 1. " INTID305 ,Interrupt ID305 Priority/Priority Byte Offset 305 " hexmask.long.byte 0x00 0.--7. 1. " INTID304 ,Interrupt ID304 Priority/Priority Byte Offset 304 " group.long 0x534++0x03 line.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77" hexmask.long.byte 0x00 24.--31. 1. " INTID311 ,Interrupt ID311 Priority/Priority Byte Offset 311 " hexmask.long.byte 0x00 16.--23. 1. " INTID310 ,Interrupt ID310 Priority/Priority Byte Offset 310 " hexmask.long.byte 0x00 8.--15. 1. " INTID309 ,Interrupt ID309 Priority/Priority Byte Offset 309 " hexmask.long.byte 0x00 0.--7. 1. " INTID308 ,Interrupt ID308 Priority/Priority Byte Offset 308 " group.long 0x538++0x03 line.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78" hexmask.long.byte 0x00 24.--31. 1. " INTID315 ,Interrupt ID315 Priority/Priority Byte Offset 315 " hexmask.long.byte 0x00 16.--23. 1. " INTID314 ,Interrupt ID314 Priority/Priority Byte Offset 314 " hexmask.long.byte 0x00 8.--15. 1. " INTID313 ,Interrupt ID313 Priority/Priority Byte Offset 313 " hexmask.long.byte 0x00 0.--7. 1. " INTID312 ,Interrupt ID312 Priority/Priority Byte Offset 312 " group.long 0x53C++0x03 line.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79" hexmask.long.byte 0x00 24.--31. 1. " INTID319 ,Interrupt ID319 Priority/Priority Byte Offset 319 " hexmask.long.byte 0x00 16.--23. 1. " INTID318 ,Interrupt ID318 Priority/Priority Byte Offset 318 " hexmask.long.byte 0x00 8.--15. 1. " INTID317 ,Interrupt ID317 Priority/Priority Byte Offset 317 " hexmask.long.byte 0x00 0.--7. 1. " INTID316 ,Interrupt ID316 Priority/Priority Byte Offset 316 " else hgroup.long 0x520++0x03 hide.long 0x00 "GICD_IPRIORITYR72,Interrupt Priority Register 72" hgroup.long 0x524++0x03 hide.long 0x00 "GICD_IPRIORITYR73,Interrupt Priority Register 73" hgroup.long 0x528++0x03 hide.long 0x00 "GICD_IPRIORITYR74,Interrupt Priority Register 74" hgroup.long 0x52C++0x03 hide.long 0x00 "GICD_IPRIORITYR75,Interrupt Priority Register 75" hgroup.long 0x530++0x03 hide.long 0x00 "GICD_IPRIORITYR76,Interrupt Priority Register 76" hgroup.long 0x534++0x03 hide.long 0x00 "GICD_IPRIORITYR77,Interrupt Priority Register 77" hgroup.long 0x538++0x03 hide.long 0x00 "GICD_IPRIORITYR78,Interrupt Priority Register 78" hgroup.long 0x53C++0x03 hide.long 0x00 "GICD_IPRIORITYR79,Interrupt Priority Register 79" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0A) group.long 0x540++0x03 line.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80" hexmask.long.byte 0x00 24.--31. 1. " INTID323 ,Interrupt ID323 Priority/Priority Byte Offset 323 " hexmask.long.byte 0x00 16.--23. 1. " INTID322 ,Interrupt ID322 Priority/Priority Byte Offset 322 " hexmask.long.byte 0x00 8.--15. 1. " INTID321 ,Interrupt ID321 Priority/Priority Byte Offset 321 " hexmask.long.byte 0x00 0.--7. 1. " INTID320 ,Interrupt ID320 Priority/Priority Byte Offset 320 " group.long 0x544++0x03 line.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81" hexmask.long.byte 0x00 24.--31. 1. " INTID327 ,Interrupt ID327 Priority/Priority Byte Offset 327 " hexmask.long.byte 0x00 16.--23. 1. " INTID326 ,Interrupt ID326 Priority/Priority Byte Offset 326 " hexmask.long.byte 0x00 8.--15. 1. " INTID325 ,Interrupt ID325 Priority/Priority Byte Offset 325 " hexmask.long.byte 0x00 0.--7. 1. " INTID324 ,Interrupt ID324 Priority/Priority Byte Offset 324 " group.long 0x548++0x03 line.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82" hexmask.long.byte 0x00 24.--31. 1. " INTID331 ,Interrupt ID331 Priority/Priority Byte Offset 331 " hexmask.long.byte 0x00 16.--23. 1. " INTID330 ,Interrupt ID330 Priority/Priority Byte Offset 330 " hexmask.long.byte 0x00 8.--15. 1. " INTID329 ,Interrupt ID329 Priority/Priority Byte Offset 329 " hexmask.long.byte 0x00 0.--7. 1. " INTID328 ,Interrupt ID328 Priority/Priority Byte Offset 328 " group.long 0x54C++0x03 line.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83" hexmask.long.byte 0x00 24.--31. 1. " INTID335 ,Interrupt ID335 Priority/Priority Byte Offset 335 " hexmask.long.byte 0x00 16.--23. 1. " INTID334 ,Interrupt ID334 Priority/Priority Byte Offset 334 " hexmask.long.byte 0x00 8.--15. 1. " INTID333 ,Interrupt ID333 Priority/Priority Byte Offset 333 " hexmask.long.byte 0x00 0.--7. 1. " INTID332 ,Interrupt ID332 Priority/Priority Byte Offset 332 " group.long 0x550++0x03 line.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84" hexmask.long.byte 0x00 24.--31. 1. " INTID339 ,Interrupt ID339 Priority/Priority Byte Offset 339 " hexmask.long.byte 0x00 16.--23. 1. " INTID338 ,Interrupt ID338 Priority/Priority Byte Offset 338 " hexmask.long.byte 0x00 8.--15. 1. " INTID337 ,Interrupt ID337 Priority/Priority Byte Offset 337 " hexmask.long.byte 0x00 0.--7. 1. " INTID336 ,Interrupt ID336 Priority/Priority Byte Offset 336 " group.long 0x554++0x03 line.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85" hexmask.long.byte 0x00 24.--31. 1. " INTID343 ,Interrupt ID343 Priority/Priority Byte Offset 343 " hexmask.long.byte 0x00 16.--23. 1. " INTID342 ,Interrupt ID342 Priority/Priority Byte Offset 342 " hexmask.long.byte 0x00 8.--15. 1. " INTID341 ,Interrupt ID341 Priority/Priority Byte Offset 341 " hexmask.long.byte 0x00 0.--7. 1. " INTID340 ,Interrupt ID340 Priority/Priority Byte Offset 340 " group.long 0x558++0x03 line.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86" hexmask.long.byte 0x00 24.--31. 1. " INTID347 ,Interrupt ID347 Priority/Priority Byte Offset 347 " hexmask.long.byte 0x00 16.--23. 1. " INTID346 ,Interrupt ID346 Priority/Priority Byte Offset 346 " hexmask.long.byte 0x00 8.--15. 1. " INTID345 ,Interrupt ID345 Priority/Priority Byte Offset 345 " hexmask.long.byte 0x00 0.--7. 1. " INTID344 ,Interrupt ID344 Priority/Priority Byte Offset 344 " group.long 0x55C++0x03 line.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87" hexmask.long.byte 0x00 24.--31. 1. " INTID351 ,Interrupt ID351 Priority/Priority Byte Offset 351 " hexmask.long.byte 0x00 16.--23. 1. " INTID350 ,Interrupt ID350 Priority/Priority Byte Offset 350 " hexmask.long.byte 0x00 8.--15. 1. " INTID349 ,Interrupt ID349 Priority/Priority Byte Offset 349 " hexmask.long.byte 0x00 0.--7. 1. " INTID348 ,Interrupt ID348 Priority/Priority Byte Offset 348 " else hgroup.long 0x540++0x03 hide.long 0x00 "GICD_IPRIORITYR80,Interrupt Priority Register 80" hgroup.long 0x544++0x03 hide.long 0x00 "GICD_IPRIORITYR81,Interrupt Priority Register 81" hgroup.long 0x548++0x03 hide.long 0x00 "GICD_IPRIORITYR82,Interrupt Priority Register 82" hgroup.long 0x54C++0x03 hide.long 0x00 "GICD_IPRIORITYR83,Interrupt Priority Register 83" hgroup.long 0x550++0x03 hide.long 0x00 "GICD_IPRIORITYR84,Interrupt Priority Register 84" hgroup.long 0x554++0x03 hide.long 0x00 "GICD_IPRIORITYR85,Interrupt Priority Register 85" hgroup.long 0x558++0x03 hide.long 0x00 "GICD_IPRIORITYR86,Interrupt Priority Register 86" hgroup.long 0x55C++0x03 hide.long 0x00 "GICD_IPRIORITYR87,Interrupt Priority Register 87" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0B) group.long 0x560++0x03 line.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88" hexmask.long.byte 0x00 24.--31. 1. " INTID355 ,Interrupt ID355 Priority/Priority Byte Offset 355 " hexmask.long.byte 0x00 16.--23. 1. " INTID354 ,Interrupt ID354 Priority/Priority Byte Offset 354 " hexmask.long.byte 0x00 8.--15. 1. " INTID353 ,Interrupt ID353 Priority/Priority Byte Offset 353 " hexmask.long.byte 0x00 0.--7. 1. " INTID352 ,Interrupt ID352 Priority/Priority Byte Offset 352 " group.long 0x564++0x03 line.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89" hexmask.long.byte 0x00 24.--31. 1. " INTID359 ,Interrupt ID359 Priority/Priority Byte Offset 359 " hexmask.long.byte 0x00 16.--23. 1. " INTID358 ,Interrupt ID358 Priority/Priority Byte Offset 358 " hexmask.long.byte 0x00 8.--15. 1. " INTID357 ,Interrupt ID357 Priority/Priority Byte Offset 357 " hexmask.long.byte 0x00 0.--7. 1. " INTID356 ,Interrupt ID356 Priority/Priority Byte Offset 356 " group.long 0x568++0x03 line.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90" hexmask.long.byte 0x00 24.--31. 1. " INTID363 ,Interrupt ID363 Priority/Priority Byte Offset 363 " hexmask.long.byte 0x00 16.--23. 1. " INTID362 ,Interrupt ID362 Priority/Priority Byte Offset 362 " hexmask.long.byte 0x00 8.--15. 1. " INTID361 ,Interrupt ID361 Priority/Priority Byte Offset 361 " hexmask.long.byte 0x00 0.--7. 1. " INTID360 ,Interrupt ID360 Priority/Priority Byte Offset 360 " group.long 0x56C++0x03 line.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91" hexmask.long.byte 0x00 24.--31. 1. " INTID367 ,Interrupt ID367 Priority/Priority Byte Offset 367 " hexmask.long.byte 0x00 16.--23. 1. " INTID366 ,Interrupt ID366 Priority/Priority Byte Offset 366 " hexmask.long.byte 0x00 8.--15. 1. " INTID365 ,Interrupt ID365 Priority/Priority Byte Offset 365 " hexmask.long.byte 0x00 0.--7. 1. " INTID364 ,Interrupt ID364 Priority/Priority Byte Offset 364 " group.long 0x570++0x03 line.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92" hexmask.long.byte 0x00 24.--31. 1. " INTID371 ,Interrupt ID371 Priority/Priority Byte Offset 371 " hexmask.long.byte 0x00 16.--23. 1. " INTID370 ,Interrupt ID370 Priority/Priority Byte Offset 370 " hexmask.long.byte 0x00 8.--15. 1. " INTID369 ,Interrupt ID369 Priority/Priority Byte Offset 369 " hexmask.long.byte 0x00 0.--7. 1. " INTID368 ,Interrupt ID368 Priority/Priority Byte Offset 368 " group.long 0x574++0x03 line.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93" hexmask.long.byte 0x00 24.--31. 1. " INTID375 ,Interrupt ID375 Priority/Priority Byte Offset 375 " hexmask.long.byte 0x00 16.--23. 1. " INTID374 ,Interrupt ID374 Priority/Priority Byte Offset 374 " hexmask.long.byte 0x00 8.--15. 1. " INTID373 ,Interrupt ID373 Priority/Priority Byte Offset 373 " hexmask.long.byte 0x00 0.--7. 1. " INTID372 ,Interrupt ID372 Priority/Priority Byte Offset 372 " group.long 0x578++0x03 line.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94" hexmask.long.byte 0x00 24.--31. 1. " INTID379 ,Interrupt ID379 Priority/Priority Byte Offset 379 " hexmask.long.byte 0x00 16.--23. 1. " INTID378 ,Interrupt ID378 Priority/Priority Byte Offset 378 " hexmask.long.byte 0x00 8.--15. 1. " INTID377 ,Interrupt ID377 Priority/Priority Byte Offset 377 " hexmask.long.byte 0x00 0.--7. 1. " INTID376 ,Interrupt ID376 Priority/Priority Byte Offset 376 " group.long 0x57C++0x03 line.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95" hexmask.long.byte 0x00 24.--31. 1. " INTID383 ,Interrupt ID383 Priority/Priority Byte Offset 383 " hexmask.long.byte 0x00 16.--23. 1. " INTID382 ,Interrupt ID382 Priority/Priority Byte Offset 382 " hexmask.long.byte 0x00 8.--15. 1. " INTID381 ,Interrupt ID381 Priority/Priority Byte Offset 381 " hexmask.long.byte 0x00 0.--7. 1. " INTID380 ,Interrupt ID380 Priority/Priority Byte Offset 380 " else hgroup.long 0x560++0x03 hide.long 0x00 "GICD_IPRIORITYR88,Interrupt Priority Register 88" hgroup.long 0x564++0x03 hide.long 0x00 "GICD_IPRIORITYR89,Interrupt Priority Register 89" hgroup.long 0x568++0x03 hide.long 0x00 "GICD_IPRIORITYR90,Interrupt Priority Register 90" hgroup.long 0x56C++0x03 hide.long 0x00 "GICD_IPRIORITYR91,Interrupt Priority Register 91" hgroup.long 0x570++0x03 hide.long 0x00 "GICD_IPRIORITYR92,Interrupt Priority Register 92" hgroup.long 0x574++0x03 hide.long 0x00 "GICD_IPRIORITYR93,Interrupt Priority Register 93" hgroup.long 0x578++0x03 hide.long 0x00 "GICD_IPRIORITYR94,Interrupt Priority Register 94" hgroup.long 0x57C++0x03 hide.long 0x00 "GICD_IPRIORITYR95,Interrupt Priority Register 95" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0C) group.long 0x580++0x03 line.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96" hexmask.long.byte 0x00 24.--31. 1. " INTID387 ,Interrupt ID387 Priority/Priority Byte Offset 387 " hexmask.long.byte 0x00 16.--23. 1. " INTID386 ,Interrupt ID386 Priority/Priority Byte Offset 386 " hexmask.long.byte 0x00 8.--15. 1. " INTID385 ,Interrupt ID385 Priority/Priority Byte Offset 385 " hexmask.long.byte 0x00 0.--7. 1. " INTID384 ,Interrupt ID384 Priority/Priority Byte Offset 384 " group.long 0x584++0x03 line.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97" hexmask.long.byte 0x00 24.--31. 1. " INTID391 ,Interrupt ID391 Priority/Priority Byte Offset 391 " hexmask.long.byte 0x00 16.--23. 1. " INTID390 ,Interrupt ID390 Priority/Priority Byte Offset 390 " hexmask.long.byte 0x00 8.--15. 1. " INTID389 ,Interrupt ID389 Priority/Priority Byte Offset 389 " hexmask.long.byte 0x00 0.--7. 1. " INTID388 ,Interrupt ID388 Priority/Priority Byte Offset 388 " group.long 0x588++0x03 line.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98" hexmask.long.byte 0x00 24.--31. 1. " INTID395 ,Interrupt ID395 Priority/Priority Byte Offset 395 " hexmask.long.byte 0x00 16.--23. 1. " INTID394 ,Interrupt ID394 Priority/Priority Byte Offset 394 " hexmask.long.byte 0x00 8.--15. 1. " INTID393 ,Interrupt ID393 Priority/Priority Byte Offset 393 " hexmask.long.byte 0x00 0.--7. 1. " INTID392 ,Interrupt ID392 Priority/Priority Byte Offset 392 " group.long 0x58C++0x03 line.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99" hexmask.long.byte 0x00 24.--31. 1. " INTID399 ,Interrupt ID399 Priority/Priority Byte Offset 399 " hexmask.long.byte 0x00 16.--23. 1. " INTID398 ,Interrupt ID398 Priority/Priority Byte Offset 398 " hexmask.long.byte 0x00 8.--15. 1. " INTID397 ,Interrupt ID397 Priority/Priority Byte Offset 397 " hexmask.long.byte 0x00 0.--7. 1. " INTID396 ,Interrupt ID396 Priority/Priority Byte Offset 396 " group.long 0x590++0x03 line.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100" hexmask.long.byte 0x00 24.--31. 1. " INTID403 ,Interrupt ID403 Priority/Priority Byte Offset 403 " hexmask.long.byte 0x00 16.--23. 1. " INTID402 ,Interrupt ID402 Priority/Priority Byte Offset 402 " hexmask.long.byte 0x00 8.--15. 1. " INTID401 ,Interrupt ID401 Priority/Priority Byte Offset 401 " hexmask.long.byte 0x00 0.--7. 1. " INTID400 ,Interrupt ID400 Priority/Priority Byte Offset 400 " group.long 0x594++0x03 line.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101" hexmask.long.byte 0x00 24.--31. 1. " INTID407 ,Interrupt ID407 Priority/Priority Byte Offset 407 " hexmask.long.byte 0x00 16.--23. 1. " INTID406 ,Interrupt ID406 Priority/Priority Byte Offset 406 " hexmask.long.byte 0x00 8.--15. 1. " INTID405 ,Interrupt ID405 Priority/Priority Byte Offset 405 " hexmask.long.byte 0x00 0.--7. 1. " INTID404 ,Interrupt ID404 Priority/Priority Byte Offset 404 " group.long 0x598++0x03 line.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102" hexmask.long.byte 0x00 24.--31. 1. " INTID411 ,Interrupt ID411 Priority/Priority Byte Offset 411 " hexmask.long.byte 0x00 16.--23. 1. " INTID410 ,Interrupt ID410 Priority/Priority Byte Offset 410 " hexmask.long.byte 0x00 8.--15. 1. " INTID409 ,Interrupt ID409 Priority/Priority Byte Offset 409 " hexmask.long.byte 0x00 0.--7. 1. " INTID408 ,Interrupt ID408 Priority/Priority Byte Offset 408 " group.long 0x59C++0x03 line.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103" hexmask.long.byte 0x00 24.--31. 1. " INTID415 ,Interrupt ID415 Priority/Priority Byte Offset 415 " hexmask.long.byte 0x00 16.--23. 1. " INTID414 ,Interrupt ID414 Priority/Priority Byte Offset 414 " hexmask.long.byte 0x00 8.--15. 1. " INTID413 ,Interrupt ID413 Priority/Priority Byte Offset 413 " hexmask.long.byte 0x00 0.--7. 1. " INTID412 ,Interrupt ID412 Priority/Priority Byte Offset 412 " else hgroup.long 0x580++0x03 hide.long 0x00 "GICD_IPRIORITYR96,Interrupt Priority Register 96" hgroup.long 0x584++0x03 hide.long 0x00 "GICD_IPRIORITYR97,Interrupt Priority Register 97" hgroup.long 0x588++0x03 hide.long 0x00 "GICD_IPRIORITYR98,Interrupt Priority Register 98" hgroup.long 0x58C++0x03 hide.long 0x00 "GICD_IPRIORITYR99,Interrupt Priority Register 99" hgroup.long 0x590++0x03 hide.long 0x00 "GICD_IPRIORITYR100,Interrupt Priority Register 100" hgroup.long 0x594++0x03 hide.long 0x00 "GICD_IPRIORITYR101,Interrupt Priority Register 101" hgroup.long 0x598++0x03 hide.long 0x00 "GICD_IPRIORITYR102,Interrupt Priority Register 102" hgroup.long 0x59C++0x03 hide.long 0x00 "GICD_IPRIORITYR103,Interrupt Priority Register 103" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0D) group.long 0x5A0++0x03 line.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104" hexmask.long.byte 0x00 24.--31. 1. " INTID419 ,Interrupt ID419 Priority/Priority Byte Offset 419 " hexmask.long.byte 0x00 16.--23. 1. " INTID418 ,Interrupt ID418 Priority/Priority Byte Offset 418 " hexmask.long.byte 0x00 8.--15. 1. " INTID417 ,Interrupt ID417 Priority/Priority Byte Offset 417 " hexmask.long.byte 0x00 0.--7. 1. " INTID416 ,Interrupt ID416 Priority/Priority Byte Offset 416 " group.long 0x5A4++0x03 line.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105" hexmask.long.byte 0x00 24.--31. 1. " INTID423 ,Interrupt ID423 Priority/Priority Byte Offset 423 " hexmask.long.byte 0x00 16.--23. 1. " INTID422 ,Interrupt ID422 Priority/Priority Byte Offset 422 " hexmask.long.byte 0x00 8.--15. 1. " INTID421 ,Interrupt ID421 Priority/Priority Byte Offset 421 " hexmask.long.byte 0x00 0.--7. 1. " INTID420 ,Interrupt ID420 Priority/Priority Byte Offset 420 " group.long 0x5A8++0x03 line.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106" hexmask.long.byte 0x00 24.--31. 1. " INTID427 ,Interrupt ID427 Priority/Priority Byte Offset 427 " hexmask.long.byte 0x00 16.--23. 1. " INTID426 ,Interrupt ID426 Priority/Priority Byte Offset 426 " hexmask.long.byte 0x00 8.--15. 1. " INTID425 ,Interrupt ID425 Priority/Priority Byte Offset 425 " hexmask.long.byte 0x00 0.--7. 1. " INTID424 ,Interrupt ID424 Priority/Priority Byte Offset 424 " group.long 0x5AC++0x03 line.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107" hexmask.long.byte 0x00 24.--31. 1. " INTID431 ,Interrupt ID431 Priority/Priority Byte Offset 431 " hexmask.long.byte 0x00 16.--23. 1. " INTID430 ,Interrupt ID430 Priority/Priority Byte Offset 430 " hexmask.long.byte 0x00 8.--15. 1. " INTID429 ,Interrupt ID429 Priority/Priority Byte Offset 429 " hexmask.long.byte 0x00 0.--7. 1. " INTID428 ,Interrupt ID428 Priority/Priority Byte Offset 428 " group.long 0x5B0++0x03 line.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108" hexmask.long.byte 0x00 24.--31. 1. " INTID435 ,Interrupt ID435 Priority/Priority Byte Offset 435 " hexmask.long.byte 0x00 16.--23. 1. " INTID434 ,Interrupt ID434 Priority/Priority Byte Offset 434 " hexmask.long.byte 0x00 8.--15. 1. " INTID433 ,Interrupt ID433 Priority/Priority Byte Offset 433 " hexmask.long.byte 0x00 0.--7. 1. " INTID432 ,Interrupt ID432 Priority/Priority Byte Offset 432 " group.long 0x5B4++0x03 line.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109" hexmask.long.byte 0x00 24.--31. 1. " INTID439 ,Interrupt ID439 Priority/Priority Byte Offset 439 " hexmask.long.byte 0x00 16.--23. 1. " INTID438 ,Interrupt ID438 Priority/Priority Byte Offset 438 " hexmask.long.byte 0x00 8.--15. 1. " INTID437 ,Interrupt ID437 Priority/Priority Byte Offset 437 " hexmask.long.byte 0x00 0.--7. 1. " INTID436 ,Interrupt ID436 Priority/Priority Byte Offset 436 " group.long 0x5B8++0x03 line.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110" hexmask.long.byte 0x00 24.--31. 1. " INTID443 ,Interrupt ID443 Priority/Priority Byte Offset 443 " hexmask.long.byte 0x00 16.--23. 1. " INTID442 ,Interrupt ID442 Priority/Priority Byte Offset 442 " hexmask.long.byte 0x00 8.--15. 1. " INTID441 ,Interrupt ID441 Priority/Priority Byte Offset 441 " hexmask.long.byte 0x00 0.--7. 1. " INTID440 ,Interrupt ID440 Priority/Priority Byte Offset 440 " group.long 0x5BC++0x03 line.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111" hexmask.long.byte 0x00 24.--31. 1. " INTID447 ,Interrupt ID447 Priority/Priority Byte Offset 447 " hexmask.long.byte 0x00 16.--23. 1. " INTID446 ,Interrupt ID446 Priority/Priority Byte Offset 446 " hexmask.long.byte 0x00 8.--15. 1. " INTID445 ,Interrupt ID445 Priority/Priority Byte Offset 445 " hexmask.long.byte 0x00 0.--7. 1. " INTID444 ,Interrupt ID444 Priority/Priority Byte Offset 444 " else hgroup.long 0x5A0++0x03 hide.long 0x00 "GICD_IPRIORITYR104,Interrupt Priority Register 104" hgroup.long 0x5A4++0x03 hide.long 0x00 "GICD_IPRIORITYR105,Interrupt Priority Register 105" hgroup.long 0x5A8++0x03 hide.long 0x00 "GICD_IPRIORITYR106,Interrupt Priority Register 106" hgroup.long 0x5AC++0x03 hide.long 0x00 "GICD_IPRIORITYR107,Interrupt Priority Register 107" hgroup.long 0x5B0++0x03 hide.long 0x00 "GICD_IPRIORITYR108,Interrupt Priority Register 108" hgroup.long 0x5B4++0x03 hide.long 0x00 "GICD_IPRIORITYR109,Interrupt Priority Register 109" hgroup.long 0x5B8++0x03 hide.long 0x00 "GICD_IPRIORITYR110,Interrupt Priority Register 110" hgroup.long 0x5BC++0x03 hide.long 0x00 "GICD_IPRIORITYR111,Interrupt Priority Register 111" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0E) group.long 0x5C0++0x03 line.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112" hexmask.long.byte 0x00 24.--31. 1. " INTID451 ,Interrupt ID451 Priority/Priority Byte Offset 451 " hexmask.long.byte 0x00 16.--23. 1. " INTID450 ,Interrupt ID450 Priority/Priority Byte Offset 450 " hexmask.long.byte 0x00 8.--15. 1. " INTID449 ,Interrupt ID449 Priority/Priority Byte Offset 449 " hexmask.long.byte 0x00 0.--7. 1. " INTID448 ,Interrupt ID448 Priority/Priority Byte Offset 448 " group.long 0x5C4++0x03 line.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113" hexmask.long.byte 0x00 24.--31. 1. " INTID455 ,Interrupt ID455 Priority/Priority Byte Offset 455 " hexmask.long.byte 0x00 16.--23. 1. " INTID454 ,Interrupt ID454 Priority/Priority Byte Offset 454 " hexmask.long.byte 0x00 8.--15. 1. " INTID453 ,Interrupt ID453 Priority/Priority Byte Offset 453 " hexmask.long.byte 0x00 0.--7. 1. " INTID452 ,Interrupt ID452 Priority/Priority Byte Offset 452 " group.long 0x5C8++0x03 line.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114" hexmask.long.byte 0x00 24.--31. 1. " INTID459 ,Interrupt ID459 Priority/Priority Byte Offset 459 " hexmask.long.byte 0x00 16.--23. 1. " INTID458 ,Interrupt ID458 Priority/Priority Byte Offset 458 " hexmask.long.byte 0x00 8.--15. 1. " INTID457 ,Interrupt ID457 Priority/Priority Byte Offset 457 " hexmask.long.byte 0x00 0.--7. 1. " INTID456 ,Interrupt ID456 Priority/Priority Byte Offset 456 " group.long 0x5CC++0x03 line.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115" hexmask.long.byte 0x00 24.--31. 1. " INTID463 ,Interrupt ID463 Priority/Priority Byte Offset 463 " hexmask.long.byte 0x00 16.--23. 1. " INTID462 ,Interrupt ID462 Priority/Priority Byte Offset 462 " hexmask.long.byte 0x00 8.--15. 1. " INTID461 ,Interrupt ID461 Priority/Priority Byte Offset 461 " hexmask.long.byte 0x00 0.--7. 1. " INTID460 ,Interrupt ID460 Priority/Priority Byte Offset 460 " group.long 0x5D0++0x03 line.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116" hexmask.long.byte 0x00 24.--31. 1. " INTID467 ,Interrupt ID467 Priority/Priority Byte Offset 467 " hexmask.long.byte 0x00 16.--23. 1. " INTID466 ,Interrupt ID466 Priority/Priority Byte Offset 466 " hexmask.long.byte 0x00 8.--15. 1. " INTID465 ,Interrupt ID465 Priority/Priority Byte Offset 465 " hexmask.long.byte 0x00 0.--7. 1. " INTID464 ,Interrupt ID464 Priority/Priority Byte Offset 464 " group.long 0x5D4++0x03 line.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117" hexmask.long.byte 0x00 24.--31. 1. " INTID471 ,Interrupt ID471 Priority/Priority Byte Offset 471 " hexmask.long.byte 0x00 16.--23. 1. " INTID470 ,Interrupt ID470 Priority/Priority Byte Offset 470 " hexmask.long.byte 0x00 8.--15. 1. " INTID469 ,Interrupt ID469 Priority/Priority Byte Offset 469 " hexmask.long.byte 0x00 0.--7. 1. " INTID468 ,Interrupt ID468 Priority/Priority Byte Offset 468 " group.long 0x5D8++0x03 line.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118" hexmask.long.byte 0x00 24.--31. 1. " INTID475 ,Interrupt ID475 Priority/Priority Byte Offset 475 " hexmask.long.byte 0x00 16.--23. 1. " INTID474 ,Interrupt ID474 Priority/Priority Byte Offset 474 " hexmask.long.byte 0x00 8.--15. 1. " INTID473 ,Interrupt ID473 Priority/Priority Byte Offset 473 " hexmask.long.byte 0x00 0.--7. 1. " INTID472 ,Interrupt ID472 Priority/Priority Byte Offset 472 " group.long 0x5DC++0x03 line.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119" hexmask.long.byte 0x00 24.--31. 1. " INTID479 ,Interrupt ID479 Priority/Priority Byte Offset 479 " hexmask.long.byte 0x00 16.--23. 1. " INTID478 ,Interrupt ID478 Priority/Priority Byte Offset 478 " hexmask.long.byte 0x00 8.--15. 1. " INTID477 ,Interrupt ID477 Priority/Priority Byte Offset 477 " hexmask.long.byte 0x00 0.--7. 1. " INTID476 ,Interrupt ID476 Priority/Priority Byte Offset 476 " else hgroup.long 0x5C0++0x03 hide.long 0x00 "GICD_IPRIORITYR112,Interrupt Priority Register 112" hgroup.long 0x5C4++0x03 hide.long 0x00 "GICD_IPRIORITYR113,Interrupt Priority Register 113" hgroup.long 0x5C8++0x03 hide.long 0x00 "GICD_IPRIORITYR114,Interrupt Priority Register 114" hgroup.long 0x5CC++0x03 hide.long 0x00 "GICD_IPRIORITYR115,Interrupt Priority Register 115" hgroup.long 0x5D0++0x03 hide.long 0x00 "GICD_IPRIORITYR116,Interrupt Priority Register 116" hgroup.long 0x5D4++0x03 hide.long 0x00 "GICD_IPRIORITYR117,Interrupt Priority Register 117" hgroup.long 0x5D8++0x03 hide.long 0x00 "GICD_IPRIORITYR118,Interrupt Priority Register 118" hgroup.long 0x5DC++0x03 hide.long 0x00 "GICD_IPRIORITYR119,Interrupt Priority Register 119" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0F) group.long 0x5E0++0x03 line.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120" hexmask.long.byte 0x00 24.--31. 1. " INTID483 ,Interrupt ID483 Priority/Priority Byte Offset 483 " hexmask.long.byte 0x00 16.--23. 1. " INTID482 ,Interrupt ID482 Priority/Priority Byte Offset 482 " hexmask.long.byte 0x00 8.--15. 1. " INTID481 ,Interrupt ID481 Priority/Priority Byte Offset 481 " hexmask.long.byte 0x00 0.--7. 1. " INTID480 ,Interrupt ID480 Priority/Priority Byte Offset 480 " group.long 0x5E4++0x03 line.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121" hexmask.long.byte 0x00 24.--31. 1. " INTID487 ,Interrupt ID487 Priority/Priority Byte Offset 487 " hexmask.long.byte 0x00 16.--23. 1. " INTID486 ,Interrupt ID486 Priority/Priority Byte Offset 486 " hexmask.long.byte 0x00 8.--15. 1. " INTID485 ,Interrupt ID485 Priority/Priority Byte Offset 485 " hexmask.long.byte 0x00 0.--7. 1. " INTID484 ,Interrupt ID484 Priority/Priority Byte Offset 484 " group.long 0x5E8++0x03 line.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122" hexmask.long.byte 0x00 24.--31. 1. " INTID491 ,Interrupt ID491 Priority/Priority Byte Offset 491 " hexmask.long.byte 0x00 16.--23. 1. " INTID490 ,Interrupt ID490 Priority/Priority Byte Offset 490 " hexmask.long.byte 0x00 8.--15. 1. " INTID489 ,Interrupt ID489 Priority/Priority Byte Offset 489 " hexmask.long.byte 0x00 0.--7. 1. " INTID488 ,Interrupt ID488 Priority/Priority Byte Offset 488 " group.long 0x5EC++0x03 line.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123" hexmask.long.byte 0x00 24.--31. 1. " INTID495 ,Interrupt ID495 Priority/Priority Byte Offset 495 " hexmask.long.byte 0x00 16.--23. 1. " INTID494 ,Interrupt ID494 Priority/Priority Byte Offset 494 " hexmask.long.byte 0x00 8.--15. 1. " INTID493 ,Interrupt ID493 Priority/Priority Byte Offset 493 " hexmask.long.byte 0x00 0.--7. 1. " INTID492 ,Interrupt ID492 Priority/Priority Byte Offset 492 " group.long 0x5F0++0x03 line.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124" hexmask.long.byte 0x00 24.--31. 1. " INTID499 ,Interrupt ID499 Priority/Priority Byte Offset 499 " hexmask.long.byte 0x00 16.--23. 1. " INTID498 ,Interrupt ID498 Priority/Priority Byte Offset 498 " hexmask.long.byte 0x00 8.--15. 1. " INTID497 ,Interrupt ID497 Priority/Priority Byte Offset 497 " hexmask.long.byte 0x00 0.--7. 1. " INTID496 ,Interrupt ID496 Priority/Priority Byte Offset 496 " group.long 0x5F4++0x03 line.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125" hexmask.long.byte 0x00 24.--31. 1. " INTID503 ,Interrupt ID503 Priority/Priority Byte Offset 503 " hexmask.long.byte 0x00 16.--23. 1. " INTID502 ,Interrupt ID502 Priority/Priority Byte Offset 502 " hexmask.long.byte 0x00 8.--15. 1. " INTID501 ,Interrupt ID501 Priority/Priority Byte Offset 501 " hexmask.long.byte 0x00 0.--7. 1. " INTID500 ,Interrupt ID500 Priority/Priority Byte Offset 500 " group.long 0x5F8++0x03 line.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126" hexmask.long.byte 0x00 24.--31. 1. " INTID507 ,Interrupt ID507 Priority/Priority Byte Offset 507 " hexmask.long.byte 0x00 16.--23. 1. " INTID506 ,Interrupt ID506 Priority/Priority Byte Offset 506 " hexmask.long.byte 0x00 8.--15. 1. " INTID505 ,Interrupt ID505 Priority/Priority Byte Offset 505 " hexmask.long.byte 0x00 0.--7. 1. " INTID504 ,Interrupt ID504 Priority/Priority Byte Offset 504 " group.long 0x5FC++0x03 line.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127" hexmask.long.byte 0x00 24.--31. 1. " INTID511 ,Interrupt ID511 Priority/Priority Byte Offset 511 " hexmask.long.byte 0x00 16.--23. 1. " INTID510 ,Interrupt ID510 Priority/Priority Byte Offset 510 " hexmask.long.byte 0x00 8.--15. 1. " INTID509 ,Interrupt ID509 Priority/Priority Byte Offset 509 " hexmask.long.byte 0x00 0.--7. 1. " INTID508 ,Interrupt ID508 Priority/Priority Byte Offset 508 " else hgroup.long 0x5E0++0x03 hide.long 0x00 "GICD_IPRIORITYR120,Interrupt Priority Register 120" hgroup.long 0x5E4++0x03 hide.long 0x00 "GICD_IPRIORITYR121,Interrupt Priority Register 121" hgroup.long 0x5E8++0x03 hide.long 0x00 "GICD_IPRIORITYR122,Interrupt Priority Register 122" hgroup.long 0x5EC++0x03 hide.long 0x00 "GICD_IPRIORITYR123,Interrupt Priority Register 123" hgroup.long 0x5F0++0x03 hide.long 0x00 "GICD_IPRIORITYR124,Interrupt Priority Register 124" hgroup.long 0x5F4++0x03 hide.long 0x00 "GICD_IPRIORITYR125,Interrupt Priority Register 125" hgroup.long 0x5F8++0x03 hide.long 0x00 "GICD_IPRIORITYR126,Interrupt Priority Register 126" hgroup.long 0x5FC++0x03 hide.long 0x00 "GICD_IPRIORITYR127,Interrupt Priority Register 127" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10) group.long 0x600++0x03 line.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128" hexmask.long.byte 0x00 24.--31. 1. " INTID515 ,Interrupt ID515 Priority/Priority Byte Offset 515 " hexmask.long.byte 0x00 16.--23. 1. " INTID514 ,Interrupt ID514 Priority/Priority Byte Offset 514 " hexmask.long.byte 0x00 8.--15. 1. " INTID513 ,Interrupt ID513 Priority/Priority Byte Offset 513 " hexmask.long.byte 0x00 0.--7. 1. " INTID512 ,Interrupt ID512 Priority/Priority Byte Offset 512 " group.long 0x604++0x03 line.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129" hexmask.long.byte 0x00 24.--31. 1. " INTID519 ,Interrupt ID519 Priority/Priority Byte Offset 519 " hexmask.long.byte 0x00 16.--23. 1. " INTID518 ,Interrupt ID518 Priority/Priority Byte Offset 518 " hexmask.long.byte 0x00 8.--15. 1. " INTID517 ,Interrupt ID517 Priority/Priority Byte Offset 517 " hexmask.long.byte 0x00 0.--7. 1. " INTID516 ,Interrupt ID516 Priority/Priority Byte Offset 516 " group.long 0x608++0x03 line.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130" hexmask.long.byte 0x00 24.--31. 1. " INTID523 ,Interrupt ID523 Priority/Priority Byte Offset 523 " hexmask.long.byte 0x00 16.--23. 1. " INTID522 ,Interrupt ID522 Priority/Priority Byte Offset 522 " hexmask.long.byte 0x00 8.--15. 1. " INTID521 ,Interrupt ID521 Priority/Priority Byte Offset 521 " hexmask.long.byte 0x00 0.--7. 1. " INTID520 ,Interrupt ID520 Priority/Priority Byte Offset 520 " group.long 0x60C++0x03 line.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131" hexmask.long.byte 0x00 24.--31. 1. " INTID527 ,Interrupt ID527 Priority/Priority Byte Offset 527 " hexmask.long.byte 0x00 16.--23. 1. " INTID526 ,Interrupt ID526 Priority/Priority Byte Offset 526 " hexmask.long.byte 0x00 8.--15. 1. " INTID525 ,Interrupt ID525 Priority/Priority Byte Offset 525 " hexmask.long.byte 0x00 0.--7. 1. " INTID524 ,Interrupt ID524 Priority/Priority Byte Offset 524 " group.long 0x610++0x03 line.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132" hexmask.long.byte 0x00 24.--31. 1. " INTID531 ,Interrupt ID531 Priority/Priority Byte Offset 531 " hexmask.long.byte 0x00 16.--23. 1. " INTID530 ,Interrupt ID530 Priority/Priority Byte Offset 530 " hexmask.long.byte 0x00 8.--15. 1. " INTID529 ,Interrupt ID529 Priority/Priority Byte Offset 529 " hexmask.long.byte 0x00 0.--7. 1. " INTID528 ,Interrupt ID528 Priority/Priority Byte Offset 528 " group.long 0x614++0x03 line.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133" hexmask.long.byte 0x00 24.--31. 1. " INTID535 ,Interrupt ID535 Priority/Priority Byte Offset 535 " hexmask.long.byte 0x00 16.--23. 1. " INTID534 ,Interrupt ID534 Priority/Priority Byte Offset 534 " hexmask.long.byte 0x00 8.--15. 1. " INTID533 ,Interrupt ID533 Priority/Priority Byte Offset 533 " hexmask.long.byte 0x00 0.--7. 1. " INTID532 ,Interrupt ID532 Priority/Priority Byte Offset 532 " group.long 0x618++0x03 line.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134" hexmask.long.byte 0x00 24.--31. 1. " INTID539 ,Interrupt ID539 Priority/Priority Byte Offset 539 " hexmask.long.byte 0x00 16.--23. 1. " INTID538 ,Interrupt ID538 Priority/Priority Byte Offset 538 " hexmask.long.byte 0x00 8.--15. 1. " INTID537 ,Interrupt ID537 Priority/Priority Byte Offset 537 " hexmask.long.byte 0x00 0.--7. 1. " INTID536 ,Interrupt ID536 Priority/Priority Byte Offset 536 " group.long 0x61C++0x03 line.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135" hexmask.long.byte 0x00 24.--31. 1. " INTID543 ,Interrupt ID543 Priority/Priority Byte Offset 543 " hexmask.long.byte 0x00 16.--23. 1. " INTID542 ,Interrupt ID542 Priority/Priority Byte Offset 542 " hexmask.long.byte 0x00 8.--15. 1. " INTID541 ,Interrupt ID541 Priority/Priority Byte Offset 541 " hexmask.long.byte 0x00 0.--7. 1. " INTID540 ,Interrupt ID540 Priority/Priority Byte Offset 540 " else hgroup.long 0x600++0x03 hide.long 0x00 "GICD_IPRIORITYR128,Interrupt Priority Register 128" hgroup.long 0x604++0x03 hide.long 0x00 "GICD_IPRIORITYR129,Interrupt Priority Register 129" hgroup.long 0x608++0x03 hide.long 0x00 "GICD_IPRIORITYR130,Interrupt Priority Register 130" hgroup.long 0x60C++0x03 hide.long 0x00 "GICD_IPRIORITYR131,Interrupt Priority Register 131" hgroup.long 0x610++0x03 hide.long 0x00 "GICD_IPRIORITYR132,Interrupt Priority Register 132" hgroup.long 0x614++0x03 hide.long 0x00 "GICD_IPRIORITYR133,Interrupt Priority Register 133" hgroup.long 0x618++0x03 hide.long 0x00 "GICD_IPRIORITYR134,Interrupt Priority Register 134" hgroup.long 0x61C++0x03 hide.long 0x00 "GICD_IPRIORITYR135,Interrupt Priority Register 135" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11) group.long 0x620++0x03 line.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136" hexmask.long.byte 0x00 24.--31. 1. " INTID547 ,Interrupt ID547 Priority/Priority Byte Offset 547 " hexmask.long.byte 0x00 16.--23. 1. " INTID546 ,Interrupt ID546 Priority/Priority Byte Offset 546 " hexmask.long.byte 0x00 8.--15. 1. " INTID545 ,Interrupt ID545 Priority/Priority Byte Offset 545 " hexmask.long.byte 0x00 0.--7. 1. " INTID544 ,Interrupt ID544 Priority/Priority Byte Offset 544 " group.long 0x624++0x03 line.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137" hexmask.long.byte 0x00 24.--31. 1. " INTID551 ,Interrupt ID551 Priority/Priority Byte Offset 551 " hexmask.long.byte 0x00 16.--23. 1. " INTID550 ,Interrupt ID550 Priority/Priority Byte Offset 550 " hexmask.long.byte 0x00 8.--15. 1. " INTID549 ,Interrupt ID549 Priority/Priority Byte Offset 549 " hexmask.long.byte 0x00 0.--7. 1. " INTID548 ,Interrupt ID548 Priority/Priority Byte Offset 548 " group.long 0x628++0x03 line.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138" hexmask.long.byte 0x00 24.--31. 1. " INTID555 ,Interrupt ID555 Priority/Priority Byte Offset 555 " hexmask.long.byte 0x00 16.--23. 1. " INTID554 ,Interrupt ID554 Priority/Priority Byte Offset 554 " hexmask.long.byte 0x00 8.--15. 1. " INTID553 ,Interrupt ID553 Priority/Priority Byte Offset 553 " hexmask.long.byte 0x00 0.--7. 1. " INTID552 ,Interrupt ID552 Priority/Priority Byte Offset 552 " group.long 0x62C++0x03 line.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139" hexmask.long.byte 0x00 24.--31. 1. " INTID559 ,Interrupt ID559 Priority/Priority Byte Offset 559 " hexmask.long.byte 0x00 16.--23. 1. " INTID558 ,Interrupt ID558 Priority/Priority Byte Offset 558 " hexmask.long.byte 0x00 8.--15. 1. " INTID557 ,Interrupt ID557 Priority/Priority Byte Offset 557 " hexmask.long.byte 0x00 0.--7. 1. " INTID556 ,Interrupt ID556 Priority/Priority Byte Offset 556 " group.long 0x630++0x03 line.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140" hexmask.long.byte 0x00 24.--31. 1. " INTID563 ,Interrupt ID563 Priority/Priority Byte Offset 563 " hexmask.long.byte 0x00 16.--23. 1. " INTID562 ,Interrupt ID562 Priority/Priority Byte Offset 562 " hexmask.long.byte 0x00 8.--15. 1. " INTID561 ,Interrupt ID561 Priority/Priority Byte Offset 561 " hexmask.long.byte 0x00 0.--7. 1. " INTID560 ,Interrupt ID560 Priority/Priority Byte Offset 560 " group.long 0x634++0x03 line.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141" hexmask.long.byte 0x00 24.--31. 1. " INTID567 ,Interrupt ID567 Priority/Priority Byte Offset 567 " hexmask.long.byte 0x00 16.--23. 1. " INTID566 ,Interrupt ID566 Priority/Priority Byte Offset 566 " hexmask.long.byte 0x00 8.--15. 1. " INTID565 ,Interrupt ID565 Priority/Priority Byte Offset 565 " hexmask.long.byte 0x00 0.--7. 1. " INTID564 ,Interrupt ID564 Priority/Priority Byte Offset 564 " group.long 0x638++0x03 line.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142" hexmask.long.byte 0x00 24.--31. 1. " INTID571 ,Interrupt ID571 Priority/Priority Byte Offset 571 " hexmask.long.byte 0x00 16.--23. 1. " INTID570 ,Interrupt ID570 Priority/Priority Byte Offset 570 " hexmask.long.byte 0x00 8.--15. 1. " INTID569 ,Interrupt ID569 Priority/Priority Byte Offset 569 " hexmask.long.byte 0x00 0.--7. 1. " INTID568 ,Interrupt ID568 Priority/Priority Byte Offset 568 " group.long 0x63C++0x03 line.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143" hexmask.long.byte 0x00 24.--31. 1. " INTID575 ,Interrupt ID575 Priority/Priority Byte Offset 575 " hexmask.long.byte 0x00 16.--23. 1. " INTID574 ,Interrupt ID574 Priority/Priority Byte Offset 574 " hexmask.long.byte 0x00 8.--15. 1. " INTID573 ,Interrupt ID573 Priority/Priority Byte Offset 573 " hexmask.long.byte 0x00 0.--7. 1. " INTID572 ,Interrupt ID572 Priority/Priority Byte Offset 572 " else hgroup.long 0x620++0x03 hide.long 0x00 "GICD_IPRIORITYR136,Interrupt Priority Register 136" hgroup.long 0x624++0x03 hide.long 0x00 "GICD_IPRIORITYR137,Interrupt Priority Register 137" hgroup.long 0x628++0x03 hide.long 0x00 "GICD_IPRIORITYR138,Interrupt Priority Register 138" hgroup.long 0x62C++0x03 hide.long 0x00 "GICD_IPRIORITYR139,Interrupt Priority Register 139" hgroup.long 0x630++0x03 hide.long 0x00 "GICD_IPRIORITYR140,Interrupt Priority Register 140" hgroup.long 0x634++0x03 hide.long 0x00 "GICD_IPRIORITYR141,Interrupt Priority Register 141" hgroup.long 0x638++0x03 hide.long 0x00 "GICD_IPRIORITYR142,Interrupt Priority Register 142" hgroup.long 0x63C++0x03 hide.long 0x00 "GICD_IPRIORITYR143,Interrupt Priority Register 143" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12) group.long 0x640++0x03 line.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144" hexmask.long.byte 0x00 24.--31. 1. " INTID579 ,Interrupt ID579 Priority/Priority Byte Offset 579 " hexmask.long.byte 0x00 16.--23. 1. " INTID578 ,Interrupt ID578 Priority/Priority Byte Offset 578 " hexmask.long.byte 0x00 8.--15. 1. " INTID577 ,Interrupt ID577 Priority/Priority Byte Offset 577 " hexmask.long.byte 0x00 0.--7. 1. " INTID576 ,Interrupt ID576 Priority/Priority Byte Offset 576 " group.long 0x644++0x03 line.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145" hexmask.long.byte 0x00 24.--31. 1. " INTID583 ,Interrupt ID583 Priority/Priority Byte Offset 583 " hexmask.long.byte 0x00 16.--23. 1. " INTID582 ,Interrupt ID582 Priority/Priority Byte Offset 582 " hexmask.long.byte 0x00 8.--15. 1. " INTID581 ,Interrupt ID581 Priority/Priority Byte Offset 581 " hexmask.long.byte 0x00 0.--7. 1. " INTID580 ,Interrupt ID580 Priority/Priority Byte Offset 580 " group.long 0x648++0x03 line.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146" hexmask.long.byte 0x00 24.--31. 1. " INTID587 ,Interrupt ID587 Priority/Priority Byte Offset 587 " hexmask.long.byte 0x00 16.--23. 1. " INTID586 ,Interrupt ID586 Priority/Priority Byte Offset 586 " hexmask.long.byte 0x00 8.--15. 1. " INTID585 ,Interrupt ID585 Priority/Priority Byte Offset 585 " hexmask.long.byte 0x00 0.--7. 1. " INTID584 ,Interrupt ID584 Priority/Priority Byte Offset 584 " group.long 0x64C++0x03 line.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147" hexmask.long.byte 0x00 24.--31. 1. " INTID591 ,Interrupt ID591 Priority/Priority Byte Offset 591 " hexmask.long.byte 0x00 16.--23. 1. " INTID590 ,Interrupt ID590 Priority/Priority Byte Offset 590 " hexmask.long.byte 0x00 8.--15. 1. " INTID589 ,Interrupt ID589 Priority/Priority Byte Offset 589 " hexmask.long.byte 0x00 0.--7. 1. " INTID588 ,Interrupt ID588 Priority/Priority Byte Offset 588 " group.long 0x650++0x03 line.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148" hexmask.long.byte 0x00 24.--31. 1. " INTID595 ,Interrupt ID595 Priority/Priority Byte Offset 595 " hexmask.long.byte 0x00 16.--23. 1. " INTID594 ,Interrupt ID594 Priority/Priority Byte Offset 594 " hexmask.long.byte 0x00 8.--15. 1. " INTID593 ,Interrupt ID593 Priority/Priority Byte Offset 593 " hexmask.long.byte 0x00 0.--7. 1. " INTID592 ,Interrupt ID592 Priority/Priority Byte Offset 592 " group.long 0x654++0x03 line.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149" hexmask.long.byte 0x00 24.--31. 1. " INTID599 ,Interrupt ID599 Priority/Priority Byte Offset 599 " hexmask.long.byte 0x00 16.--23. 1. " INTID598 ,Interrupt ID598 Priority/Priority Byte Offset 598 " hexmask.long.byte 0x00 8.--15. 1. " INTID597 ,Interrupt ID597 Priority/Priority Byte Offset 597 " hexmask.long.byte 0x00 0.--7. 1. " INTID596 ,Interrupt ID596 Priority/Priority Byte Offset 596 " group.long 0x658++0x03 line.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150" hexmask.long.byte 0x00 24.--31. 1. " INTID603 ,Interrupt ID603 Priority/Priority Byte Offset 603 " hexmask.long.byte 0x00 16.--23. 1. " INTID602 ,Interrupt ID602 Priority/Priority Byte Offset 602 " hexmask.long.byte 0x00 8.--15. 1. " INTID601 ,Interrupt ID601 Priority/Priority Byte Offset 601 " hexmask.long.byte 0x00 0.--7. 1. " INTID600 ,Interrupt ID600 Priority/Priority Byte Offset 600 " group.long 0x65C++0x03 line.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151" hexmask.long.byte 0x00 24.--31. 1. " INTID607 ,Interrupt ID607 Priority/Priority Byte Offset 607 " hexmask.long.byte 0x00 16.--23. 1. " INTID606 ,Interrupt ID606 Priority/Priority Byte Offset 606 " hexmask.long.byte 0x00 8.--15. 1. " INTID605 ,Interrupt ID605 Priority/Priority Byte Offset 605 " hexmask.long.byte 0x00 0.--7. 1. " INTID604 ,Interrupt ID604 Priority/Priority Byte Offset 604 " else hgroup.long 0x640++0x03 hide.long 0x00 "GICD_IPRIORITYR144,Interrupt Priority Register 144" hgroup.long 0x644++0x03 hide.long 0x00 "GICD_IPRIORITYR145,Interrupt Priority Register 145" hgroup.long 0x648++0x03 hide.long 0x00 "GICD_IPRIORITYR146,Interrupt Priority Register 146" hgroup.long 0x64C++0x03 hide.long 0x00 "GICD_IPRIORITYR147,Interrupt Priority Register 147" hgroup.long 0x650++0x03 hide.long 0x00 "GICD_IPRIORITYR148,Interrupt Priority Register 148" hgroup.long 0x654++0x03 hide.long 0x00 "GICD_IPRIORITYR149,Interrupt Priority Register 149" hgroup.long 0x658++0x03 hide.long 0x00 "GICD_IPRIORITYR150,Interrupt Priority Register 150" hgroup.long 0x65C++0x03 hide.long 0x00 "GICD_IPRIORITYR151,Interrupt Priority Register 151" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13) group.long 0x660++0x03 line.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152" hexmask.long.byte 0x00 24.--31. 1. " INTID611 ,Interrupt ID611 Priority/Priority Byte Offset 611 " hexmask.long.byte 0x00 16.--23. 1. " INTID610 ,Interrupt ID610 Priority/Priority Byte Offset 610 " hexmask.long.byte 0x00 8.--15. 1. " INTID609 ,Interrupt ID609 Priority/Priority Byte Offset 609 " hexmask.long.byte 0x00 0.--7. 1. " INTID608 ,Interrupt ID608 Priority/Priority Byte Offset 608 " group.long 0x664++0x03 line.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153" hexmask.long.byte 0x00 24.--31. 1. " INTID615 ,Interrupt ID615 Priority/Priority Byte Offset 615 " hexmask.long.byte 0x00 16.--23. 1. " INTID614 ,Interrupt ID614 Priority/Priority Byte Offset 614 " hexmask.long.byte 0x00 8.--15. 1. " INTID613 ,Interrupt ID613 Priority/Priority Byte Offset 613 " hexmask.long.byte 0x00 0.--7. 1. " INTID612 ,Interrupt ID612 Priority/Priority Byte Offset 612 " group.long 0x668++0x03 line.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154" hexmask.long.byte 0x00 24.--31. 1. " INTID619 ,Interrupt ID619 Priority/Priority Byte Offset 619 " hexmask.long.byte 0x00 16.--23. 1. " INTID618 ,Interrupt ID618 Priority/Priority Byte Offset 618 " hexmask.long.byte 0x00 8.--15. 1. " INTID617 ,Interrupt ID617 Priority/Priority Byte Offset 617 " hexmask.long.byte 0x00 0.--7. 1. " INTID616 ,Interrupt ID616 Priority/Priority Byte Offset 616 " group.long 0x66C++0x03 line.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155" hexmask.long.byte 0x00 24.--31. 1. " INTID623 ,Interrupt ID623 Priority/Priority Byte Offset 623 " hexmask.long.byte 0x00 16.--23. 1. " INTID622 ,Interrupt ID622 Priority/Priority Byte Offset 622 " hexmask.long.byte 0x00 8.--15. 1. " INTID621 ,Interrupt ID621 Priority/Priority Byte Offset 621 " hexmask.long.byte 0x00 0.--7. 1. " INTID620 ,Interrupt ID620 Priority/Priority Byte Offset 620 " group.long 0x670++0x03 line.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156" hexmask.long.byte 0x00 24.--31. 1. " INTID627 ,Interrupt ID627 Priority/Priority Byte Offset 627 " hexmask.long.byte 0x00 16.--23. 1. " INTID626 ,Interrupt ID626 Priority/Priority Byte Offset 626 " hexmask.long.byte 0x00 8.--15. 1. " INTID625 ,Interrupt ID625 Priority/Priority Byte Offset 625 " hexmask.long.byte 0x00 0.--7. 1. " INTID624 ,Interrupt ID624 Priority/Priority Byte Offset 624 " group.long 0x674++0x03 line.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157" hexmask.long.byte 0x00 24.--31. 1. " INTID631 ,Interrupt ID631 Priority/Priority Byte Offset 631 " hexmask.long.byte 0x00 16.--23. 1. " INTID630 ,Interrupt ID630 Priority/Priority Byte Offset 630 " hexmask.long.byte 0x00 8.--15. 1. " INTID629 ,Interrupt ID629 Priority/Priority Byte Offset 629 " hexmask.long.byte 0x00 0.--7. 1. " INTID628 ,Interrupt ID628 Priority/Priority Byte Offset 628 " group.long 0x678++0x03 line.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158" hexmask.long.byte 0x00 24.--31. 1. " INTID635 ,Interrupt ID635 Priority/Priority Byte Offset 635 " hexmask.long.byte 0x00 16.--23. 1. " INTID634 ,Interrupt ID634 Priority/Priority Byte Offset 634 " hexmask.long.byte 0x00 8.--15. 1. " INTID633 ,Interrupt ID633 Priority/Priority Byte Offset 633 " hexmask.long.byte 0x00 0.--7. 1. " INTID632 ,Interrupt ID632 Priority/Priority Byte Offset 632 " group.long 0x67C++0x03 line.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159" hexmask.long.byte 0x00 24.--31. 1. " INTID639 ,Interrupt ID639 Priority/Priority Byte Offset 639 " hexmask.long.byte 0x00 16.--23. 1. " INTID638 ,Interrupt ID638 Priority/Priority Byte Offset 638 " hexmask.long.byte 0x00 8.--15. 1. " INTID637 ,Interrupt ID637 Priority/Priority Byte Offset 637 " hexmask.long.byte 0x00 0.--7. 1. " INTID636 ,Interrupt ID636 Priority/Priority Byte Offset 636 " else hgroup.long 0x660++0x03 hide.long 0x00 "GICD_IPRIORITYR152,Interrupt Priority Register 152" hgroup.long 0x664++0x03 hide.long 0x00 "GICD_IPRIORITYR153,Interrupt Priority Register 153" hgroup.long 0x668++0x03 hide.long 0x00 "GICD_IPRIORITYR154,Interrupt Priority Register 154" hgroup.long 0x66C++0x03 hide.long 0x00 "GICD_IPRIORITYR155,Interrupt Priority Register 155" hgroup.long 0x670++0x03 hide.long 0x00 "GICD_IPRIORITYR156,Interrupt Priority Register 156" hgroup.long 0x674++0x03 hide.long 0x00 "GICD_IPRIORITYR157,Interrupt Priority Register 157" hgroup.long 0x678++0x03 hide.long 0x00 "GICD_IPRIORITYR158,Interrupt Priority Register 158" hgroup.long 0x67C++0x03 hide.long 0x00 "GICD_IPRIORITYR159,Interrupt Priority Register 159" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14) group.long 0x680++0x03 line.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160" hexmask.long.byte 0x00 24.--31. 1. " INTID643 ,Interrupt ID643 Priority/Priority Byte Offset 643 " hexmask.long.byte 0x00 16.--23. 1. " INTID642 ,Interrupt ID642 Priority/Priority Byte Offset 642 " hexmask.long.byte 0x00 8.--15. 1. " INTID641 ,Interrupt ID641 Priority/Priority Byte Offset 641 " hexmask.long.byte 0x00 0.--7. 1. " INTID640 ,Interrupt ID640 Priority/Priority Byte Offset 640 " group.long 0x684++0x03 line.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161" hexmask.long.byte 0x00 24.--31. 1. " INTID647 ,Interrupt ID647 Priority/Priority Byte Offset 647 " hexmask.long.byte 0x00 16.--23. 1. " INTID646 ,Interrupt ID646 Priority/Priority Byte Offset 646 " hexmask.long.byte 0x00 8.--15. 1. " INTID645 ,Interrupt ID645 Priority/Priority Byte Offset 645 " hexmask.long.byte 0x00 0.--7. 1. " INTID644 ,Interrupt ID644 Priority/Priority Byte Offset 644 " group.long 0x688++0x03 line.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162" hexmask.long.byte 0x00 24.--31. 1. " INTID651 ,Interrupt ID651 Priority/Priority Byte Offset 651 " hexmask.long.byte 0x00 16.--23. 1. " INTID650 ,Interrupt ID650 Priority/Priority Byte Offset 650 " hexmask.long.byte 0x00 8.--15. 1. " INTID649 ,Interrupt ID649 Priority/Priority Byte Offset 649 " hexmask.long.byte 0x00 0.--7. 1. " INTID648 ,Interrupt ID648 Priority/Priority Byte Offset 648 " group.long 0x68C++0x03 line.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163" hexmask.long.byte 0x00 24.--31. 1. " INTID655 ,Interrupt ID655 Priority/Priority Byte Offset 655 " hexmask.long.byte 0x00 16.--23. 1. " INTID654 ,Interrupt ID654 Priority/Priority Byte Offset 654 " hexmask.long.byte 0x00 8.--15. 1. " INTID653 ,Interrupt ID653 Priority/Priority Byte Offset 653 " hexmask.long.byte 0x00 0.--7. 1. " INTID652 ,Interrupt ID652 Priority/Priority Byte Offset 652 " group.long 0x690++0x03 line.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164" hexmask.long.byte 0x00 24.--31. 1. " INTID659 ,Interrupt ID659 Priority/Priority Byte Offset 659 " hexmask.long.byte 0x00 16.--23. 1. " INTID658 ,Interrupt ID658 Priority/Priority Byte Offset 658 " hexmask.long.byte 0x00 8.--15. 1. " INTID657 ,Interrupt ID657 Priority/Priority Byte Offset 657 " hexmask.long.byte 0x00 0.--7. 1. " INTID656 ,Interrupt ID656 Priority/Priority Byte Offset 656 " group.long 0x694++0x03 line.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165" hexmask.long.byte 0x00 24.--31. 1. " INTID663 ,Interrupt ID663 Priority/Priority Byte Offset 663 " hexmask.long.byte 0x00 16.--23. 1. " INTID662 ,Interrupt ID662 Priority/Priority Byte Offset 662 " hexmask.long.byte 0x00 8.--15. 1. " INTID661 ,Interrupt ID661 Priority/Priority Byte Offset 661 " hexmask.long.byte 0x00 0.--7. 1. " INTID660 ,Interrupt ID660 Priority/Priority Byte Offset 660 " group.long 0x698++0x03 line.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166" hexmask.long.byte 0x00 24.--31. 1. " INTID667 ,Interrupt ID667 Priority/Priority Byte Offset 667 " hexmask.long.byte 0x00 16.--23. 1. " INTID666 ,Interrupt ID666 Priority/Priority Byte Offset 666 " hexmask.long.byte 0x00 8.--15. 1. " INTID665 ,Interrupt ID665 Priority/Priority Byte Offset 665 " hexmask.long.byte 0x00 0.--7. 1. " INTID664 ,Interrupt ID664 Priority/Priority Byte Offset 664 " group.long 0x69C++0x03 line.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167" hexmask.long.byte 0x00 24.--31. 1. " INTID671 ,Interrupt ID671 Priority/Priority Byte Offset 671 " hexmask.long.byte 0x00 16.--23. 1. " INTID670 ,Interrupt ID670 Priority/Priority Byte Offset 670 " hexmask.long.byte 0x00 8.--15. 1. " INTID669 ,Interrupt ID669 Priority/Priority Byte Offset 669 " hexmask.long.byte 0x00 0.--7. 1. " INTID668 ,Interrupt ID668 Priority/Priority Byte Offset 668 " else hgroup.long 0x680++0x03 hide.long 0x00 "GICD_IPRIORITYR160,Interrupt Priority Register 160" hgroup.long 0x684++0x03 hide.long 0x00 "GICD_IPRIORITYR161,Interrupt Priority Register 161" hgroup.long 0x688++0x03 hide.long 0x00 "GICD_IPRIORITYR162,Interrupt Priority Register 162" hgroup.long 0x68C++0x03 hide.long 0x00 "GICD_IPRIORITYR163,Interrupt Priority Register 163" hgroup.long 0x690++0x03 hide.long 0x00 "GICD_IPRIORITYR164,Interrupt Priority Register 164" hgroup.long 0x694++0x03 hide.long 0x00 "GICD_IPRIORITYR165,Interrupt Priority Register 165" hgroup.long 0x698++0x03 hide.long 0x00 "GICD_IPRIORITYR166,Interrupt Priority Register 166" hgroup.long 0x69C++0x03 hide.long 0x00 "GICD_IPRIORITYR167,Interrupt Priority Register 167" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15) group.long 0x6A0++0x03 line.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168" hexmask.long.byte 0x00 24.--31. 1. " INTID675 ,Interrupt ID675 Priority/Priority Byte Offset 675 " hexmask.long.byte 0x00 16.--23. 1. " INTID674 ,Interrupt ID674 Priority/Priority Byte Offset 674 " hexmask.long.byte 0x00 8.--15. 1. " INTID673 ,Interrupt ID673 Priority/Priority Byte Offset 673 " hexmask.long.byte 0x00 0.--7. 1. " INTID672 ,Interrupt ID672 Priority/Priority Byte Offset 672 " group.long 0x6A4++0x03 line.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169" hexmask.long.byte 0x00 24.--31. 1. " INTID679 ,Interrupt ID679 Priority/Priority Byte Offset 679 " hexmask.long.byte 0x00 16.--23. 1. " INTID678 ,Interrupt ID678 Priority/Priority Byte Offset 678 " hexmask.long.byte 0x00 8.--15. 1. " INTID677 ,Interrupt ID677 Priority/Priority Byte Offset 677 " hexmask.long.byte 0x00 0.--7. 1. " INTID676 ,Interrupt ID676 Priority/Priority Byte Offset 676 " group.long 0x6A8++0x03 line.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170" hexmask.long.byte 0x00 24.--31. 1. " INTID683 ,Interrupt ID683 Priority/Priority Byte Offset 683 " hexmask.long.byte 0x00 16.--23. 1. " INTID682 ,Interrupt ID682 Priority/Priority Byte Offset 682 " hexmask.long.byte 0x00 8.--15. 1. " INTID681 ,Interrupt ID681 Priority/Priority Byte Offset 681 " hexmask.long.byte 0x00 0.--7. 1. " INTID680 ,Interrupt ID680 Priority/Priority Byte Offset 680 " group.long 0x6AC++0x03 line.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171" hexmask.long.byte 0x00 24.--31. 1. " INTID687 ,Interrupt ID687 Priority/Priority Byte Offset 687 " hexmask.long.byte 0x00 16.--23. 1. " INTID686 ,Interrupt ID686 Priority/Priority Byte Offset 686 " hexmask.long.byte 0x00 8.--15. 1. " INTID685 ,Interrupt ID685 Priority/Priority Byte Offset 685 " hexmask.long.byte 0x00 0.--7. 1. " INTID684 ,Interrupt ID684 Priority/Priority Byte Offset 684 " group.long 0x6B0++0x03 line.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172" hexmask.long.byte 0x00 24.--31. 1. " INTID691 ,Interrupt ID691 Priority/Priority Byte Offset 691 " hexmask.long.byte 0x00 16.--23. 1. " INTID690 ,Interrupt ID690 Priority/Priority Byte Offset 690 " hexmask.long.byte 0x00 8.--15. 1. " INTID689 ,Interrupt ID689 Priority/Priority Byte Offset 689 " hexmask.long.byte 0x00 0.--7. 1. " INTID688 ,Interrupt ID688 Priority/Priority Byte Offset 688 " group.long 0x6B4++0x03 line.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173" hexmask.long.byte 0x00 24.--31. 1. " INTID695 ,Interrupt ID695 Priority/Priority Byte Offset 695 " hexmask.long.byte 0x00 16.--23. 1. " INTID694 ,Interrupt ID694 Priority/Priority Byte Offset 694 " hexmask.long.byte 0x00 8.--15. 1. " INTID693 ,Interrupt ID693 Priority/Priority Byte Offset 693 " hexmask.long.byte 0x00 0.--7. 1. " INTID692 ,Interrupt ID692 Priority/Priority Byte Offset 692 " group.long 0x6B8++0x03 line.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174" hexmask.long.byte 0x00 24.--31. 1. " INTID699 ,Interrupt ID699 Priority/Priority Byte Offset 699 " hexmask.long.byte 0x00 16.--23. 1. " INTID698 ,Interrupt ID698 Priority/Priority Byte Offset 698 " hexmask.long.byte 0x00 8.--15. 1. " INTID697 ,Interrupt ID697 Priority/Priority Byte Offset 697 " hexmask.long.byte 0x00 0.--7. 1. " INTID696 ,Interrupt ID696 Priority/Priority Byte Offset 696 " group.long 0x6BC++0x03 line.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175" hexmask.long.byte 0x00 24.--31. 1. " INTID703 ,Interrupt ID703 Priority/Priority Byte Offset 703 " hexmask.long.byte 0x00 16.--23. 1. " INTID702 ,Interrupt ID702 Priority/Priority Byte Offset 702 " hexmask.long.byte 0x00 8.--15. 1. " INTID701 ,Interrupt ID701 Priority/Priority Byte Offset 701 " hexmask.long.byte 0x00 0.--7. 1. " INTID700 ,Interrupt ID700 Priority/Priority Byte Offset 700 " else hgroup.long 0x6A0++0x03 hide.long 0x00 "GICD_IPRIORITYR168,Interrupt Priority Register 168" hgroup.long 0x6A4++0x03 hide.long 0x00 "GICD_IPRIORITYR169,Interrupt Priority Register 169" hgroup.long 0x6A8++0x03 hide.long 0x00 "GICD_IPRIORITYR170,Interrupt Priority Register 170" hgroup.long 0x6AC++0x03 hide.long 0x00 "GICD_IPRIORITYR171,Interrupt Priority Register 171" hgroup.long 0x6B0++0x03 hide.long 0x00 "GICD_IPRIORITYR172,Interrupt Priority Register 172" hgroup.long 0x6B4++0x03 hide.long 0x00 "GICD_IPRIORITYR173,Interrupt Priority Register 173" hgroup.long 0x6B8++0x03 hide.long 0x00 "GICD_IPRIORITYR174,Interrupt Priority Register 174" hgroup.long 0x6BC++0x03 hide.long 0x00 "GICD_IPRIORITYR175,Interrupt Priority Register 175" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16) group.long 0x6C0++0x03 line.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176" hexmask.long.byte 0x00 24.--31. 1. " INTID707 ,Interrupt ID707 Priority/Priority Byte Offset 707 " hexmask.long.byte 0x00 16.--23. 1. " INTID706 ,Interrupt ID706 Priority/Priority Byte Offset 706 " hexmask.long.byte 0x00 8.--15. 1. " INTID705 ,Interrupt ID705 Priority/Priority Byte Offset 705 " hexmask.long.byte 0x00 0.--7. 1. " INTID704 ,Interrupt ID704 Priority/Priority Byte Offset 704 " group.long 0x6C4++0x03 line.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177" hexmask.long.byte 0x00 24.--31. 1. " INTID711 ,Interrupt ID711 Priority/Priority Byte Offset 711 " hexmask.long.byte 0x00 16.--23. 1. " INTID710 ,Interrupt ID710 Priority/Priority Byte Offset 710 " hexmask.long.byte 0x00 8.--15. 1. " INTID709 ,Interrupt ID709 Priority/Priority Byte Offset 709 " hexmask.long.byte 0x00 0.--7. 1. " INTID708 ,Interrupt ID708 Priority/Priority Byte Offset 708 " group.long 0x6C8++0x03 line.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178" hexmask.long.byte 0x00 24.--31. 1. " INTID715 ,Interrupt ID715 Priority/Priority Byte Offset 715 " hexmask.long.byte 0x00 16.--23. 1. " INTID714 ,Interrupt ID714 Priority/Priority Byte Offset 714 " hexmask.long.byte 0x00 8.--15. 1. " INTID713 ,Interrupt ID713 Priority/Priority Byte Offset 713 " hexmask.long.byte 0x00 0.--7. 1. " INTID712 ,Interrupt ID712 Priority/Priority Byte Offset 712 " group.long 0x6CC++0x03 line.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179" hexmask.long.byte 0x00 24.--31. 1. " INTID719 ,Interrupt ID719 Priority/Priority Byte Offset 719 " hexmask.long.byte 0x00 16.--23. 1. " INTID718 ,Interrupt ID718 Priority/Priority Byte Offset 718 " hexmask.long.byte 0x00 8.--15. 1. " INTID717 ,Interrupt ID717 Priority/Priority Byte Offset 717 " hexmask.long.byte 0x00 0.--7. 1. " INTID716 ,Interrupt ID716 Priority/Priority Byte Offset 716 " group.long 0x6D0++0x03 line.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180" hexmask.long.byte 0x00 24.--31. 1. " INTID723 ,Interrupt ID723 Priority/Priority Byte Offset 723 " hexmask.long.byte 0x00 16.--23. 1. " INTID722 ,Interrupt ID722 Priority/Priority Byte Offset 722 " hexmask.long.byte 0x00 8.--15. 1. " INTID721 ,Interrupt ID721 Priority/Priority Byte Offset 721 " hexmask.long.byte 0x00 0.--7. 1. " INTID720 ,Interrupt ID720 Priority/Priority Byte Offset 720 " group.long 0x6D4++0x03 line.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181" hexmask.long.byte 0x00 24.--31. 1. " INTID727 ,Interrupt ID727 Priority/Priority Byte Offset 727 " hexmask.long.byte 0x00 16.--23. 1. " INTID726 ,Interrupt ID726 Priority/Priority Byte Offset 726 " hexmask.long.byte 0x00 8.--15. 1. " INTID725 ,Interrupt ID725 Priority/Priority Byte Offset 725 " hexmask.long.byte 0x00 0.--7. 1. " INTID724 ,Interrupt ID724 Priority/Priority Byte Offset 724 " group.long 0x6D8++0x03 line.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182" hexmask.long.byte 0x00 24.--31. 1. " INTID731 ,Interrupt ID731 Priority/Priority Byte Offset 731 " hexmask.long.byte 0x00 16.--23. 1. " INTID730 ,Interrupt ID730 Priority/Priority Byte Offset 730 " hexmask.long.byte 0x00 8.--15. 1. " INTID729 ,Interrupt ID729 Priority/Priority Byte Offset 729 " hexmask.long.byte 0x00 0.--7. 1. " INTID728 ,Interrupt ID728 Priority/Priority Byte Offset 728 " group.long 0x6DC++0x03 line.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183" hexmask.long.byte 0x00 24.--31. 1. " INTID735 ,Interrupt ID735 Priority/Priority Byte Offset 735 " hexmask.long.byte 0x00 16.--23. 1. " INTID734 ,Interrupt ID734 Priority/Priority Byte Offset 734 " hexmask.long.byte 0x00 8.--15. 1. " INTID733 ,Interrupt ID733 Priority/Priority Byte Offset 733 " hexmask.long.byte 0x00 0.--7. 1. " INTID732 ,Interrupt ID732 Priority/Priority Byte Offset 732 " else hgroup.long 0x6C0++0x03 hide.long 0x00 "GICD_IPRIORITYR176,Interrupt Priority Register 176" hgroup.long 0x6C4++0x03 hide.long 0x00 "GICD_IPRIORITYR177,Interrupt Priority Register 177" hgroup.long 0x6C8++0x03 hide.long 0x00 "GICD_IPRIORITYR178,Interrupt Priority Register 178" hgroup.long 0x6CC++0x03 hide.long 0x00 "GICD_IPRIORITYR179,Interrupt Priority Register 179" hgroup.long 0x6D0++0x03 hide.long 0x00 "GICD_IPRIORITYR180,Interrupt Priority Register 180" hgroup.long 0x6D4++0x03 hide.long 0x00 "GICD_IPRIORITYR181,Interrupt Priority Register 181" hgroup.long 0x6D8++0x03 hide.long 0x00 "GICD_IPRIORITYR182,Interrupt Priority Register 182" hgroup.long 0x6DC++0x03 hide.long 0x00 "GICD_IPRIORITYR183,Interrupt Priority Register 183" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17) group.long 0x6E0++0x03 line.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184" hexmask.long.byte 0x00 24.--31. 1. " INTID739 ,Interrupt ID739 Priority/Priority Byte Offset 739 " hexmask.long.byte 0x00 16.--23. 1. " INTID738 ,Interrupt ID738 Priority/Priority Byte Offset 738 " hexmask.long.byte 0x00 8.--15. 1. " INTID737 ,Interrupt ID737 Priority/Priority Byte Offset 737 " hexmask.long.byte 0x00 0.--7. 1. " INTID736 ,Interrupt ID736 Priority/Priority Byte Offset 736 " group.long 0x6E4++0x03 line.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185" hexmask.long.byte 0x00 24.--31. 1. " INTID743 ,Interrupt ID743 Priority/Priority Byte Offset 743 " hexmask.long.byte 0x00 16.--23. 1. " INTID742 ,Interrupt ID742 Priority/Priority Byte Offset 742 " hexmask.long.byte 0x00 8.--15. 1. " INTID741 ,Interrupt ID741 Priority/Priority Byte Offset 741 " hexmask.long.byte 0x00 0.--7. 1. " INTID740 ,Interrupt ID740 Priority/Priority Byte Offset 740 " group.long 0x6E8++0x03 line.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186" hexmask.long.byte 0x00 24.--31. 1. " INTID747 ,Interrupt ID747 Priority/Priority Byte Offset 747 " hexmask.long.byte 0x00 16.--23. 1. " INTID746 ,Interrupt ID746 Priority/Priority Byte Offset 746 " hexmask.long.byte 0x00 8.--15. 1. " INTID745 ,Interrupt ID745 Priority/Priority Byte Offset 745 " hexmask.long.byte 0x00 0.--7. 1. " INTID744 ,Interrupt ID744 Priority/Priority Byte Offset 744 " group.long 0x6EC++0x03 line.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187" hexmask.long.byte 0x00 24.--31. 1. " INTID751 ,Interrupt ID751 Priority/Priority Byte Offset 751 " hexmask.long.byte 0x00 16.--23. 1. " INTID750 ,Interrupt ID750 Priority/Priority Byte Offset 750 " hexmask.long.byte 0x00 8.--15. 1. " INTID749 ,Interrupt ID749 Priority/Priority Byte Offset 749 " hexmask.long.byte 0x00 0.--7. 1. " INTID748 ,Interrupt ID748 Priority/Priority Byte Offset 748 " group.long 0x6F0++0x03 line.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188" hexmask.long.byte 0x00 24.--31. 1. " INTID755 ,Interrupt ID755 Priority/Priority Byte Offset 755 " hexmask.long.byte 0x00 16.--23. 1. " INTID754 ,Interrupt ID754 Priority/Priority Byte Offset 754 " hexmask.long.byte 0x00 8.--15. 1. " INTID753 ,Interrupt ID753 Priority/Priority Byte Offset 753 " hexmask.long.byte 0x00 0.--7. 1. " INTID752 ,Interrupt ID752 Priority/Priority Byte Offset 752 " group.long 0x6F4++0x03 line.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189" hexmask.long.byte 0x00 24.--31. 1. " INTID759 ,Interrupt ID759 Priority/Priority Byte Offset 759 " hexmask.long.byte 0x00 16.--23. 1. " INTID758 ,Interrupt ID758 Priority/Priority Byte Offset 758 " hexmask.long.byte 0x00 8.--15. 1. " INTID757 ,Interrupt ID757 Priority/Priority Byte Offset 757 " hexmask.long.byte 0x00 0.--7. 1. " INTID756 ,Interrupt ID756 Priority/Priority Byte Offset 756 " group.long 0x6F8++0x03 line.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190" hexmask.long.byte 0x00 24.--31. 1. " INTID763 ,Interrupt ID763 Priority/Priority Byte Offset 763 " hexmask.long.byte 0x00 16.--23. 1. " INTID762 ,Interrupt ID762 Priority/Priority Byte Offset 762 " hexmask.long.byte 0x00 8.--15. 1. " INTID761 ,Interrupt ID761 Priority/Priority Byte Offset 761 " hexmask.long.byte 0x00 0.--7. 1. " INTID760 ,Interrupt ID760 Priority/Priority Byte Offset 760 " group.long 0x6FC++0x03 line.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191" hexmask.long.byte 0x00 24.--31. 1. " INTID767 ,Interrupt ID767 Priority/Priority Byte Offset 767 " hexmask.long.byte 0x00 16.--23. 1. " INTID766 ,Interrupt ID766 Priority/Priority Byte Offset 766 " hexmask.long.byte 0x00 8.--15. 1. " INTID765 ,Interrupt ID765 Priority/Priority Byte Offset 765 " hexmask.long.byte 0x00 0.--7. 1. " INTID764 ,Interrupt ID764 Priority/Priority Byte Offset 764 " else hgroup.long 0x6E0++0x03 hide.long 0x00 "GICD_IPRIORITYR184,Interrupt Priority Register 184" hgroup.long 0x6E4++0x03 hide.long 0x00 "GICD_IPRIORITYR185,Interrupt Priority Register 185" hgroup.long 0x6E8++0x03 hide.long 0x00 "GICD_IPRIORITYR186,Interrupt Priority Register 186" hgroup.long 0x6EC++0x03 hide.long 0x00 "GICD_IPRIORITYR187,Interrupt Priority Register 187" hgroup.long 0x6F0++0x03 hide.long 0x00 "GICD_IPRIORITYR188,Interrupt Priority Register 188" hgroup.long 0x6F4++0x03 hide.long 0x00 "GICD_IPRIORITYR189,Interrupt Priority Register 189" hgroup.long 0x6F8++0x03 hide.long 0x00 "GICD_IPRIORITYR190,Interrupt Priority Register 190" hgroup.long 0x6FC++0x03 hide.long 0x00 "GICD_IPRIORITYR191,Interrupt Priority Register 191" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18) group.long 0x700++0x03 line.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192" hexmask.long.byte 0x00 24.--31. 1. " INTID771 ,Interrupt ID771 Priority/Priority Byte Offset 771 " hexmask.long.byte 0x00 16.--23. 1. " INTID770 ,Interrupt ID770 Priority/Priority Byte Offset 770 " hexmask.long.byte 0x00 8.--15. 1. " INTID769 ,Interrupt ID769 Priority/Priority Byte Offset 769 " hexmask.long.byte 0x00 0.--7. 1. " INTID768 ,Interrupt ID768 Priority/Priority Byte Offset 768 " group.long 0x704++0x03 line.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193" hexmask.long.byte 0x00 24.--31. 1. " INTID775 ,Interrupt ID775 Priority/Priority Byte Offset 775 " hexmask.long.byte 0x00 16.--23. 1. " INTID774 ,Interrupt ID774 Priority/Priority Byte Offset 774 " hexmask.long.byte 0x00 8.--15. 1. " INTID773 ,Interrupt ID773 Priority/Priority Byte Offset 773 " hexmask.long.byte 0x00 0.--7. 1. " INTID772 ,Interrupt ID772 Priority/Priority Byte Offset 772 " group.long 0x708++0x03 line.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194" hexmask.long.byte 0x00 24.--31. 1. " INTID779 ,Interrupt ID779 Priority/Priority Byte Offset 779 " hexmask.long.byte 0x00 16.--23. 1. " INTID778 ,Interrupt ID778 Priority/Priority Byte Offset 778 " hexmask.long.byte 0x00 8.--15. 1. " INTID777 ,Interrupt ID777 Priority/Priority Byte Offset 777 " hexmask.long.byte 0x00 0.--7. 1. " INTID776 ,Interrupt ID776 Priority/Priority Byte Offset 776 " group.long 0x70C++0x03 line.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195" hexmask.long.byte 0x00 24.--31. 1. " INTID783 ,Interrupt ID783 Priority/Priority Byte Offset 783 " hexmask.long.byte 0x00 16.--23. 1. " INTID782 ,Interrupt ID782 Priority/Priority Byte Offset 782 " hexmask.long.byte 0x00 8.--15. 1. " INTID781 ,Interrupt ID781 Priority/Priority Byte Offset 781 " hexmask.long.byte 0x00 0.--7. 1. " INTID780 ,Interrupt ID780 Priority/Priority Byte Offset 780 " group.long 0x710++0x03 line.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196" hexmask.long.byte 0x00 24.--31. 1. " INTID787 ,Interrupt ID787 Priority/Priority Byte Offset 787 " hexmask.long.byte 0x00 16.--23. 1. " INTID786 ,Interrupt ID786 Priority/Priority Byte Offset 786 " hexmask.long.byte 0x00 8.--15. 1. " INTID785 ,Interrupt ID785 Priority/Priority Byte Offset 785 " hexmask.long.byte 0x00 0.--7. 1. " INTID784 ,Interrupt ID784 Priority/Priority Byte Offset 784 " group.long 0x714++0x03 line.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197" hexmask.long.byte 0x00 24.--31. 1. " INTID791 ,Interrupt ID791 Priority/Priority Byte Offset 791 " hexmask.long.byte 0x00 16.--23. 1. " INTID790 ,Interrupt ID790 Priority/Priority Byte Offset 790 " hexmask.long.byte 0x00 8.--15. 1. " INTID789 ,Interrupt ID789 Priority/Priority Byte Offset 789 " hexmask.long.byte 0x00 0.--7. 1. " INTID788 ,Interrupt ID788 Priority/Priority Byte Offset 788 " group.long 0x718++0x03 line.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198" hexmask.long.byte 0x00 24.--31. 1. " INTID795 ,Interrupt ID795 Priority/Priority Byte Offset 795 " hexmask.long.byte 0x00 16.--23. 1. " INTID794 ,Interrupt ID794 Priority/Priority Byte Offset 794 " hexmask.long.byte 0x00 8.--15. 1. " INTID793 ,Interrupt ID793 Priority/Priority Byte Offset 793 " hexmask.long.byte 0x00 0.--7. 1. " INTID792 ,Interrupt ID792 Priority/Priority Byte Offset 792 " group.long 0x71C++0x03 line.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199" hexmask.long.byte 0x00 24.--31. 1. " INTID799 ,Interrupt ID799 Priority/Priority Byte Offset 799 " hexmask.long.byte 0x00 16.--23. 1. " INTID798 ,Interrupt ID798 Priority/Priority Byte Offset 798 " hexmask.long.byte 0x00 8.--15. 1. " INTID797 ,Interrupt ID797 Priority/Priority Byte Offset 797 " hexmask.long.byte 0x00 0.--7. 1. " INTID796 ,Interrupt ID796 Priority/Priority Byte Offset 796 " else hgroup.long 0x700++0x03 hide.long 0x00 "GICD_IPRIORITYR192,Interrupt Priority Register 192" hgroup.long 0x704++0x03 hide.long 0x00 "GICD_IPRIORITYR193,Interrupt Priority Register 193" hgroup.long 0x708++0x03 hide.long 0x00 "GICD_IPRIORITYR194,Interrupt Priority Register 194" hgroup.long 0x70C++0x03 hide.long 0x00 "GICD_IPRIORITYR195,Interrupt Priority Register 195" hgroup.long 0x710++0x03 hide.long 0x00 "GICD_IPRIORITYR196,Interrupt Priority Register 196" hgroup.long 0x714++0x03 hide.long 0x00 "GICD_IPRIORITYR197,Interrupt Priority Register 197" hgroup.long 0x718++0x03 hide.long 0x00 "GICD_IPRIORITYR198,Interrupt Priority Register 198" hgroup.long 0x71C++0x03 hide.long 0x00 "GICD_IPRIORITYR199,Interrupt Priority Register 199" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19) group.long 0x720++0x03 line.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200" hexmask.long.byte 0x00 24.--31. 1. " INTID803 ,Interrupt ID803 Priority/Priority Byte Offset 803 " hexmask.long.byte 0x00 16.--23. 1. " INTID802 ,Interrupt ID802 Priority/Priority Byte Offset 802 " hexmask.long.byte 0x00 8.--15. 1. " INTID801 ,Interrupt ID801 Priority/Priority Byte Offset 801 " hexmask.long.byte 0x00 0.--7. 1. " INTID800 ,Interrupt ID800 Priority/Priority Byte Offset 800 " group.long 0x724++0x03 line.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201" hexmask.long.byte 0x00 24.--31. 1. " INTID807 ,Interrupt ID807 Priority/Priority Byte Offset 807 " hexmask.long.byte 0x00 16.--23. 1. " INTID806 ,Interrupt ID806 Priority/Priority Byte Offset 806 " hexmask.long.byte 0x00 8.--15. 1. " INTID805 ,Interrupt ID805 Priority/Priority Byte Offset 805 " hexmask.long.byte 0x00 0.--7. 1. " INTID804 ,Interrupt ID804 Priority/Priority Byte Offset 804 " group.long 0x728++0x03 line.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202" hexmask.long.byte 0x00 24.--31. 1. " INTID811 ,Interrupt ID811 Priority/Priority Byte Offset 811 " hexmask.long.byte 0x00 16.--23. 1. " INTID810 ,Interrupt ID810 Priority/Priority Byte Offset 810 " hexmask.long.byte 0x00 8.--15. 1. " INTID809 ,Interrupt ID809 Priority/Priority Byte Offset 809 " hexmask.long.byte 0x00 0.--7. 1. " INTID808 ,Interrupt ID808 Priority/Priority Byte Offset 808 " group.long 0x72C++0x03 line.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203" hexmask.long.byte 0x00 24.--31. 1. " INTID815 ,Interrupt ID815 Priority/Priority Byte Offset 815 " hexmask.long.byte 0x00 16.--23. 1. " INTID814 ,Interrupt ID814 Priority/Priority Byte Offset 814 " hexmask.long.byte 0x00 8.--15. 1. " INTID813 ,Interrupt ID813 Priority/Priority Byte Offset 813 " hexmask.long.byte 0x00 0.--7. 1. " INTID812 ,Interrupt ID812 Priority/Priority Byte Offset 812 " group.long 0x730++0x03 line.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204" hexmask.long.byte 0x00 24.--31. 1. " INTID819 ,Interrupt ID819 Priority/Priority Byte Offset 819 " hexmask.long.byte 0x00 16.--23. 1. " INTID818 ,Interrupt ID818 Priority/Priority Byte Offset 818 " hexmask.long.byte 0x00 8.--15. 1. " INTID817 ,Interrupt ID817 Priority/Priority Byte Offset 817 " hexmask.long.byte 0x00 0.--7. 1. " INTID816 ,Interrupt ID816 Priority/Priority Byte Offset 816 " group.long 0x734++0x03 line.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205" hexmask.long.byte 0x00 24.--31. 1. " INTID823 ,Interrupt ID823 Priority/Priority Byte Offset 823 " hexmask.long.byte 0x00 16.--23. 1. " INTID822 ,Interrupt ID822 Priority/Priority Byte Offset 822 " hexmask.long.byte 0x00 8.--15. 1. " INTID821 ,Interrupt ID821 Priority/Priority Byte Offset 821 " hexmask.long.byte 0x00 0.--7. 1. " INTID820 ,Interrupt ID820 Priority/Priority Byte Offset 820 " group.long 0x738++0x03 line.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206" hexmask.long.byte 0x00 24.--31. 1. " INTID827 ,Interrupt ID827 Priority/Priority Byte Offset 827 " hexmask.long.byte 0x00 16.--23. 1. " INTID826 ,Interrupt ID826 Priority/Priority Byte Offset 826 " hexmask.long.byte 0x00 8.--15. 1. " INTID825 ,Interrupt ID825 Priority/Priority Byte Offset 825 " hexmask.long.byte 0x00 0.--7. 1. " INTID824 ,Interrupt ID824 Priority/Priority Byte Offset 824 " group.long 0x73C++0x03 line.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207" hexmask.long.byte 0x00 24.--31. 1. " INTID831 ,Interrupt ID831 Priority/Priority Byte Offset 831 " hexmask.long.byte 0x00 16.--23. 1. " INTID830 ,Interrupt ID830 Priority/Priority Byte Offset 830 " hexmask.long.byte 0x00 8.--15. 1. " INTID829 ,Interrupt ID829 Priority/Priority Byte Offset 829 " hexmask.long.byte 0x00 0.--7. 1. " INTID828 ,Interrupt ID828 Priority/Priority Byte Offset 828 " else hgroup.long 0x720++0x03 hide.long 0x00 "GICD_IPRIORITYR200,Interrupt Priority Register 200" hgroup.long 0x724++0x03 hide.long 0x00 "GICD_IPRIORITYR201,Interrupt Priority Register 201" hgroup.long 0x728++0x03 hide.long 0x00 "GICD_IPRIORITYR202,Interrupt Priority Register 202" hgroup.long 0x72C++0x03 hide.long 0x00 "GICD_IPRIORITYR203,Interrupt Priority Register 203" hgroup.long 0x730++0x03 hide.long 0x00 "GICD_IPRIORITYR204,Interrupt Priority Register 204" hgroup.long 0x734++0x03 hide.long 0x00 "GICD_IPRIORITYR205,Interrupt Priority Register 205" hgroup.long 0x738++0x03 hide.long 0x00 "GICD_IPRIORITYR206,Interrupt Priority Register 206" hgroup.long 0x73C++0x03 hide.long 0x00 "GICD_IPRIORITYR207,Interrupt Priority Register 207" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A) group.long 0x740++0x03 line.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208" hexmask.long.byte 0x00 24.--31. 1. " INTID835 ,Interrupt ID835 Priority/Priority Byte Offset 835 " hexmask.long.byte 0x00 16.--23. 1. " INTID834 ,Interrupt ID834 Priority/Priority Byte Offset 834 " hexmask.long.byte 0x00 8.--15. 1. " INTID833 ,Interrupt ID833 Priority/Priority Byte Offset 833 " hexmask.long.byte 0x00 0.--7. 1. " INTID832 ,Interrupt ID832 Priority/Priority Byte Offset 832 " group.long 0x744++0x03 line.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209" hexmask.long.byte 0x00 24.--31. 1. " INTID839 ,Interrupt ID839 Priority/Priority Byte Offset 839 " hexmask.long.byte 0x00 16.--23. 1. " INTID838 ,Interrupt ID838 Priority/Priority Byte Offset 838 " hexmask.long.byte 0x00 8.--15. 1. " INTID837 ,Interrupt ID837 Priority/Priority Byte Offset 837 " hexmask.long.byte 0x00 0.--7. 1. " INTID836 ,Interrupt ID836 Priority/Priority Byte Offset 836 " group.long 0x748++0x03 line.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210" hexmask.long.byte 0x00 24.--31. 1. " INTID843 ,Interrupt ID843 Priority/Priority Byte Offset 843 " hexmask.long.byte 0x00 16.--23. 1. " INTID842 ,Interrupt ID842 Priority/Priority Byte Offset 842 " hexmask.long.byte 0x00 8.--15. 1. " INTID841 ,Interrupt ID841 Priority/Priority Byte Offset 841 " hexmask.long.byte 0x00 0.--7. 1. " INTID840 ,Interrupt ID840 Priority/Priority Byte Offset 840 " group.long 0x74C++0x03 line.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211" hexmask.long.byte 0x00 24.--31. 1. " INTID847 ,Interrupt ID847 Priority/Priority Byte Offset 847 " hexmask.long.byte 0x00 16.--23. 1. " INTID846 ,Interrupt ID846 Priority/Priority Byte Offset 846 " hexmask.long.byte 0x00 8.--15. 1. " INTID845 ,Interrupt ID845 Priority/Priority Byte Offset 845 " hexmask.long.byte 0x00 0.--7. 1. " INTID844 ,Interrupt ID844 Priority/Priority Byte Offset 844 " group.long 0x750++0x03 line.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212" hexmask.long.byte 0x00 24.--31. 1. " INTID851 ,Interrupt ID851 Priority/Priority Byte Offset 851 " hexmask.long.byte 0x00 16.--23. 1. " INTID850 ,Interrupt ID850 Priority/Priority Byte Offset 850 " hexmask.long.byte 0x00 8.--15. 1. " INTID849 ,Interrupt ID849 Priority/Priority Byte Offset 849 " hexmask.long.byte 0x00 0.--7. 1. " INTID848 ,Interrupt ID848 Priority/Priority Byte Offset 848 " group.long 0x754++0x03 line.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213" hexmask.long.byte 0x00 24.--31. 1. " INTID855 ,Interrupt ID855 Priority/Priority Byte Offset 855 " hexmask.long.byte 0x00 16.--23. 1. " INTID854 ,Interrupt ID854 Priority/Priority Byte Offset 854 " hexmask.long.byte 0x00 8.--15. 1. " INTID853 ,Interrupt ID853 Priority/Priority Byte Offset 853 " hexmask.long.byte 0x00 0.--7. 1. " INTID852 ,Interrupt ID852 Priority/Priority Byte Offset 852 " group.long 0x758++0x03 line.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214" hexmask.long.byte 0x00 24.--31. 1. " INTID859 ,Interrupt ID859 Priority/Priority Byte Offset 859 " hexmask.long.byte 0x00 16.--23. 1. " INTID858 ,Interrupt ID858 Priority/Priority Byte Offset 858 " hexmask.long.byte 0x00 8.--15. 1. " INTID857 ,Interrupt ID857 Priority/Priority Byte Offset 857 " hexmask.long.byte 0x00 0.--7. 1. " INTID856 ,Interrupt ID856 Priority/Priority Byte Offset 856 " group.long 0x75C++0x03 line.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215" hexmask.long.byte 0x00 24.--31. 1. " INTID863 ,Interrupt ID863 Priority/Priority Byte Offset 863 " hexmask.long.byte 0x00 16.--23. 1. " INTID862 ,Interrupt ID862 Priority/Priority Byte Offset 862 " hexmask.long.byte 0x00 8.--15. 1. " INTID861 ,Interrupt ID861 Priority/Priority Byte Offset 861 " hexmask.long.byte 0x00 0.--7. 1. " INTID860 ,Interrupt ID860 Priority/Priority Byte Offset 860 " else hgroup.long 0x740++0x03 hide.long 0x00 "GICD_IPRIORITYR208,Interrupt Priority Register 208" hgroup.long 0x744++0x03 hide.long 0x00 "GICD_IPRIORITYR209,Interrupt Priority Register 209" hgroup.long 0x748++0x03 hide.long 0x00 "GICD_IPRIORITYR210,Interrupt Priority Register 210" hgroup.long 0x74C++0x03 hide.long 0x00 "GICD_IPRIORITYR211,Interrupt Priority Register 211" hgroup.long 0x750++0x03 hide.long 0x00 "GICD_IPRIORITYR212,Interrupt Priority Register 212" hgroup.long 0x754++0x03 hide.long 0x00 "GICD_IPRIORITYR213,Interrupt Priority Register 213" hgroup.long 0x758++0x03 hide.long 0x00 "GICD_IPRIORITYR214,Interrupt Priority Register 214" hgroup.long 0x75C++0x03 hide.long 0x00 "GICD_IPRIORITYR215,Interrupt Priority Register 215" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B) group.long 0x760++0x03 line.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216" hexmask.long.byte 0x00 24.--31. 1. " INTID867 ,Interrupt ID867 Priority/Priority Byte Offset 867 " hexmask.long.byte 0x00 16.--23. 1. " INTID866 ,Interrupt ID866 Priority/Priority Byte Offset 866 " hexmask.long.byte 0x00 8.--15. 1. " INTID865 ,Interrupt ID865 Priority/Priority Byte Offset 865 " hexmask.long.byte 0x00 0.--7. 1. " INTID864 ,Interrupt ID864 Priority/Priority Byte Offset 864 " group.long 0x764++0x03 line.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217" hexmask.long.byte 0x00 24.--31. 1. " INTID871 ,Interrupt ID871 Priority/Priority Byte Offset 871 " hexmask.long.byte 0x00 16.--23. 1. " INTID870 ,Interrupt ID870 Priority/Priority Byte Offset 870 " hexmask.long.byte 0x00 8.--15. 1. " INTID869 ,Interrupt ID869 Priority/Priority Byte Offset 869 " hexmask.long.byte 0x00 0.--7. 1. " INTID868 ,Interrupt ID868 Priority/Priority Byte Offset 868 " group.long 0x768++0x03 line.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218" hexmask.long.byte 0x00 24.--31. 1. " INTID875 ,Interrupt ID875 Priority/Priority Byte Offset 875 " hexmask.long.byte 0x00 16.--23. 1. " INTID874 ,Interrupt ID874 Priority/Priority Byte Offset 874 " hexmask.long.byte 0x00 8.--15. 1. " INTID873 ,Interrupt ID873 Priority/Priority Byte Offset 873 " hexmask.long.byte 0x00 0.--7. 1. " INTID872 ,Interrupt ID872 Priority/Priority Byte Offset 872 " group.long 0x76C++0x03 line.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219" hexmask.long.byte 0x00 24.--31. 1. " INTID879 ,Interrupt ID879 Priority/Priority Byte Offset 879 " hexmask.long.byte 0x00 16.--23. 1. " INTID878 ,Interrupt ID878 Priority/Priority Byte Offset 878 " hexmask.long.byte 0x00 8.--15. 1. " INTID877 ,Interrupt ID877 Priority/Priority Byte Offset 877 " hexmask.long.byte 0x00 0.--7. 1. " INTID876 ,Interrupt ID876 Priority/Priority Byte Offset 876 " group.long 0x770++0x03 line.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220" hexmask.long.byte 0x00 24.--31. 1. " INTID883 ,Interrupt ID883 Priority/Priority Byte Offset 883 " hexmask.long.byte 0x00 16.--23. 1. " INTID882 ,Interrupt ID882 Priority/Priority Byte Offset 882 " hexmask.long.byte 0x00 8.--15. 1. " INTID881 ,Interrupt ID881 Priority/Priority Byte Offset 881 " hexmask.long.byte 0x00 0.--7. 1. " INTID880 ,Interrupt ID880 Priority/Priority Byte Offset 880 " group.long 0x774++0x03 line.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221" hexmask.long.byte 0x00 24.--31. 1. " INTID887 ,Interrupt ID887 Priority/Priority Byte Offset 887 " hexmask.long.byte 0x00 16.--23. 1. " INTID886 ,Interrupt ID886 Priority/Priority Byte Offset 886 " hexmask.long.byte 0x00 8.--15. 1. " INTID885 ,Interrupt ID885 Priority/Priority Byte Offset 885 " hexmask.long.byte 0x00 0.--7. 1. " INTID884 ,Interrupt ID884 Priority/Priority Byte Offset 884 " group.long 0x778++0x03 line.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222" hexmask.long.byte 0x00 24.--31. 1. " INTID891 ,Interrupt ID891 Priority/Priority Byte Offset 891 " hexmask.long.byte 0x00 16.--23. 1. " INTID890 ,Interrupt ID890 Priority/Priority Byte Offset 890 " hexmask.long.byte 0x00 8.--15. 1. " INTID889 ,Interrupt ID889 Priority/Priority Byte Offset 889 " hexmask.long.byte 0x00 0.--7. 1. " INTID888 ,Interrupt ID888 Priority/Priority Byte Offset 888 " group.long 0x77C++0x03 line.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223" hexmask.long.byte 0x00 24.--31. 1. " INTID895 ,Interrupt ID895 Priority/Priority Byte Offset 895 " hexmask.long.byte 0x00 16.--23. 1. " INTID894 ,Interrupt ID894 Priority/Priority Byte Offset 894 " hexmask.long.byte 0x00 8.--15. 1. " INTID893 ,Interrupt ID893 Priority/Priority Byte Offset 893 " hexmask.long.byte 0x00 0.--7. 1. " INTID892 ,Interrupt ID892 Priority/Priority Byte Offset 892 " else hgroup.long 0x760++0x03 hide.long 0x00 "GICD_IPRIORITYR216,Interrupt Priority Register 216" hgroup.long 0x764++0x03 hide.long 0x00 "GICD_IPRIORITYR217,Interrupt Priority Register 217" hgroup.long 0x768++0x03 hide.long 0x00 "GICD_IPRIORITYR218,Interrupt Priority Register 218" hgroup.long 0x76C++0x03 hide.long 0x00 "GICD_IPRIORITYR219,Interrupt Priority Register 219" hgroup.long 0x770++0x03 hide.long 0x00 "GICD_IPRIORITYR220,Interrupt Priority Register 220" hgroup.long 0x774++0x03 hide.long 0x00 "GICD_IPRIORITYR221,Interrupt Priority Register 221" hgroup.long 0x778++0x03 hide.long 0x00 "GICD_IPRIORITYR222,Interrupt Priority Register 222" hgroup.long 0x77C++0x03 hide.long 0x00 "GICD_IPRIORITYR223,Interrupt Priority Register 223" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C) group.long 0x780++0x03 line.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224" hexmask.long.byte 0x00 24.--31. 1. " INTID899 ,Interrupt ID899 Priority/Priority Byte Offset 899 " hexmask.long.byte 0x00 16.--23. 1. " INTID898 ,Interrupt ID898 Priority/Priority Byte Offset 898 " hexmask.long.byte 0x00 8.--15. 1. " INTID897 ,Interrupt ID897 Priority/Priority Byte Offset 897 " hexmask.long.byte 0x00 0.--7. 1. " INTID896 ,Interrupt ID896 Priority/Priority Byte Offset 896 " group.long 0x784++0x03 line.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225" hexmask.long.byte 0x00 24.--31. 1. " INTID903 ,Interrupt ID903 Priority/Priority Byte Offset 903 " hexmask.long.byte 0x00 16.--23. 1. " INTID902 ,Interrupt ID902 Priority/Priority Byte Offset 902 " hexmask.long.byte 0x00 8.--15. 1. " INTID901 ,Interrupt ID901 Priority/Priority Byte Offset 901 " hexmask.long.byte 0x00 0.--7. 1. " INTID900 ,Interrupt ID900 Priority/Priority Byte Offset 900 " group.long 0x788++0x03 line.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226" hexmask.long.byte 0x00 24.--31. 1. " INTID907 ,Interrupt ID907 Priority/Priority Byte Offset 907 " hexmask.long.byte 0x00 16.--23. 1. " INTID906 ,Interrupt ID906 Priority/Priority Byte Offset 906 " hexmask.long.byte 0x00 8.--15. 1. " INTID905 ,Interrupt ID905 Priority/Priority Byte Offset 905 " hexmask.long.byte 0x00 0.--7. 1. " INTID904 ,Interrupt ID904 Priority/Priority Byte Offset 904 " group.long 0x78C++0x03 line.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227" hexmask.long.byte 0x00 24.--31. 1. " INTID911 ,Interrupt ID911 Priority/Priority Byte Offset 911 " hexmask.long.byte 0x00 16.--23. 1. " INTID910 ,Interrupt ID910 Priority/Priority Byte Offset 910 " hexmask.long.byte 0x00 8.--15. 1. " INTID909 ,Interrupt ID909 Priority/Priority Byte Offset 909 " hexmask.long.byte 0x00 0.--7. 1. " INTID908 ,Interrupt ID908 Priority/Priority Byte Offset 908 " group.long 0x790++0x03 line.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228" hexmask.long.byte 0x00 24.--31. 1. " INTID915 ,Interrupt ID915 Priority/Priority Byte Offset 915 " hexmask.long.byte 0x00 16.--23. 1. " INTID914 ,Interrupt ID914 Priority/Priority Byte Offset 914 " hexmask.long.byte 0x00 8.--15. 1. " INTID913 ,Interrupt ID913 Priority/Priority Byte Offset 913 " hexmask.long.byte 0x00 0.--7. 1. " INTID912 ,Interrupt ID912 Priority/Priority Byte Offset 912 " group.long 0x794++0x03 line.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229" hexmask.long.byte 0x00 24.--31. 1. " INTID919 ,Interrupt ID919 Priority/Priority Byte Offset 919 " hexmask.long.byte 0x00 16.--23. 1. " INTID918 ,Interrupt ID918 Priority/Priority Byte Offset 918 " hexmask.long.byte 0x00 8.--15. 1. " INTID917 ,Interrupt ID917 Priority/Priority Byte Offset 917 " hexmask.long.byte 0x00 0.--7. 1. " INTID916 ,Interrupt ID916 Priority/Priority Byte Offset 916 " group.long 0x798++0x03 line.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230" hexmask.long.byte 0x00 24.--31. 1. " INTID923 ,Interrupt ID923 Priority/Priority Byte Offset 923 " hexmask.long.byte 0x00 16.--23. 1. " INTID922 ,Interrupt ID922 Priority/Priority Byte Offset 922 " hexmask.long.byte 0x00 8.--15. 1. " INTID921 ,Interrupt ID921 Priority/Priority Byte Offset 921 " hexmask.long.byte 0x00 0.--7. 1. " INTID920 ,Interrupt ID920 Priority/Priority Byte Offset 920 " group.long 0x79C++0x03 line.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231" hexmask.long.byte 0x00 24.--31. 1. " INTID927 ,Interrupt ID927 Priority/Priority Byte Offset 927 " hexmask.long.byte 0x00 16.--23. 1. " INTID926 ,Interrupt ID926 Priority/Priority Byte Offset 926 " hexmask.long.byte 0x00 8.--15. 1. " INTID925 ,Interrupt ID925 Priority/Priority Byte Offset 925 " hexmask.long.byte 0x00 0.--7. 1. " INTID924 ,Interrupt ID924 Priority/Priority Byte Offset 924 " else hgroup.long 0x780++0x03 hide.long 0x00 "GICD_IPRIORITYR224,Interrupt Priority Register 224" hgroup.long 0x784++0x03 hide.long 0x00 "GICD_IPRIORITYR225,Interrupt Priority Register 225" hgroup.long 0x788++0x03 hide.long 0x00 "GICD_IPRIORITYR226,Interrupt Priority Register 226" hgroup.long 0x78C++0x03 hide.long 0x00 "GICD_IPRIORITYR227,Interrupt Priority Register 227" hgroup.long 0x790++0x03 hide.long 0x00 "GICD_IPRIORITYR228,Interrupt Priority Register 228" hgroup.long 0x794++0x03 hide.long 0x00 "GICD_IPRIORITYR229,Interrupt Priority Register 229" hgroup.long 0x798++0x03 hide.long 0x00 "GICD_IPRIORITYR230,Interrupt Priority Register 230" hgroup.long 0x79C++0x03 hide.long 0x00 "GICD_IPRIORITYR231,Interrupt Priority Register 231" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D) group.long 0x7A0++0x03 line.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232" hexmask.long.byte 0x00 24.--31. 1. " INTID931 ,Interrupt ID931 Priority/Priority Byte Offset 931 " hexmask.long.byte 0x00 16.--23. 1. " INTID930 ,Interrupt ID930 Priority/Priority Byte Offset 930 " hexmask.long.byte 0x00 8.--15. 1. " INTID929 ,Interrupt ID929 Priority/Priority Byte Offset 929 " hexmask.long.byte 0x00 0.--7. 1. " INTID928 ,Interrupt ID928 Priority/Priority Byte Offset 928 " group.long 0x7A4++0x03 line.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233" hexmask.long.byte 0x00 24.--31. 1. " INTID935 ,Interrupt ID935 Priority/Priority Byte Offset 935 " hexmask.long.byte 0x00 16.--23. 1. " INTID934 ,Interrupt ID934 Priority/Priority Byte Offset 934 " hexmask.long.byte 0x00 8.--15. 1. " INTID933 ,Interrupt ID933 Priority/Priority Byte Offset 933 " hexmask.long.byte 0x00 0.--7. 1. " INTID932 ,Interrupt ID932 Priority/Priority Byte Offset 932 " group.long 0x7A8++0x03 line.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234" hexmask.long.byte 0x00 24.--31. 1. " INTID939 ,Interrupt ID939 Priority/Priority Byte Offset 939 " hexmask.long.byte 0x00 16.--23. 1. " INTID938 ,Interrupt ID938 Priority/Priority Byte Offset 938 " hexmask.long.byte 0x00 8.--15. 1. " INTID937 ,Interrupt ID937 Priority/Priority Byte Offset 937 " hexmask.long.byte 0x00 0.--7. 1. " INTID936 ,Interrupt ID936 Priority/Priority Byte Offset 936 " group.long 0x7AC++0x03 line.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235" hexmask.long.byte 0x00 24.--31. 1. " INTID943 ,Interrupt ID943 Priority/Priority Byte Offset 943 " hexmask.long.byte 0x00 16.--23. 1. " INTID942 ,Interrupt ID942 Priority/Priority Byte Offset 942 " hexmask.long.byte 0x00 8.--15. 1. " INTID941 ,Interrupt ID941 Priority/Priority Byte Offset 941 " hexmask.long.byte 0x00 0.--7. 1. " INTID940 ,Interrupt ID940 Priority/Priority Byte Offset 940 " group.long 0x7B0++0x03 line.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236" hexmask.long.byte 0x00 24.--31. 1. " INTID947 ,Interrupt ID947 Priority/Priority Byte Offset 947 " hexmask.long.byte 0x00 16.--23. 1. " INTID946 ,Interrupt ID946 Priority/Priority Byte Offset 946 " hexmask.long.byte 0x00 8.--15. 1. " INTID945 ,Interrupt ID945 Priority/Priority Byte Offset 945 " hexmask.long.byte 0x00 0.--7. 1. " INTID944 ,Interrupt ID944 Priority/Priority Byte Offset 944 " group.long 0x7B4++0x03 line.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237" hexmask.long.byte 0x00 24.--31. 1. " INTID951 ,Interrupt ID951 Priority/Priority Byte Offset 951 " hexmask.long.byte 0x00 16.--23. 1. " INTID950 ,Interrupt ID950 Priority/Priority Byte Offset 950 " hexmask.long.byte 0x00 8.--15. 1. " INTID949 ,Interrupt ID949 Priority/Priority Byte Offset 949 " hexmask.long.byte 0x00 0.--7. 1. " INTID948 ,Interrupt ID948 Priority/Priority Byte Offset 948 " group.long 0x7B8++0x03 line.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238" hexmask.long.byte 0x00 24.--31. 1. " INTID955 ,Interrupt ID955 Priority/Priority Byte Offset 955 " hexmask.long.byte 0x00 16.--23. 1. " INTID954 ,Interrupt ID954 Priority/Priority Byte Offset 954 " hexmask.long.byte 0x00 8.--15. 1. " INTID953 ,Interrupt ID953 Priority/Priority Byte Offset 953 " hexmask.long.byte 0x00 0.--7. 1. " INTID952 ,Interrupt ID952 Priority/Priority Byte Offset 952 " group.long 0x7BC++0x03 line.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239" hexmask.long.byte 0x00 24.--31. 1. " INTID959 ,Interrupt ID959 Priority/Priority Byte Offset 959 " hexmask.long.byte 0x00 16.--23. 1. " INTID958 ,Interrupt ID958 Priority/Priority Byte Offset 958 " hexmask.long.byte 0x00 8.--15. 1. " INTID957 ,Interrupt ID957 Priority/Priority Byte Offset 957 " hexmask.long.byte 0x00 0.--7. 1. " INTID956 ,Interrupt ID956 Priority/Priority Byte Offset 956 " else hgroup.long 0x7A0++0x03 hide.long 0x00 "GICD_IPRIORITYR232,Interrupt Priority Register 232" hgroup.long 0x7A4++0x03 hide.long 0x00 "GICD_IPRIORITYR233,Interrupt Priority Register 233" hgroup.long 0x7A8++0x03 hide.long 0x00 "GICD_IPRIORITYR234,Interrupt Priority Register 234" hgroup.long 0x7AC++0x03 hide.long 0x00 "GICD_IPRIORITYR235,Interrupt Priority Register 235" hgroup.long 0x7B0++0x03 hide.long 0x00 "GICD_IPRIORITYR236,Interrupt Priority Register 236" hgroup.long 0x7B4++0x03 hide.long 0x00 "GICD_IPRIORITYR237,Interrupt Priority Register 237" hgroup.long 0x7B8++0x03 hide.long 0x00 "GICD_IPRIORITYR238,Interrupt Priority Register 238" hgroup.long 0x7BC++0x03 hide.long 0x00 "GICD_IPRIORITYR239,Interrupt Priority Register 239" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E) group.long 0x7C0++0x03 line.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240" hexmask.long.byte 0x00 24.--31. 1. " INTID963 ,Interrupt ID963 Priority/Priority Byte Offset 963 " hexmask.long.byte 0x00 16.--23. 1. " INTID962 ,Interrupt ID962 Priority/Priority Byte Offset 962 " hexmask.long.byte 0x00 8.--15. 1. " INTID961 ,Interrupt ID961 Priority/Priority Byte Offset 961 " hexmask.long.byte 0x00 0.--7. 1. " INTID960 ,Interrupt ID960 Priority/Priority Byte Offset 960 " group.long 0x7C4++0x03 line.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241" hexmask.long.byte 0x00 24.--31. 1. " INTID967 ,Interrupt ID967 Priority/Priority Byte Offset 967 " hexmask.long.byte 0x00 16.--23. 1. " INTID966 ,Interrupt ID966 Priority/Priority Byte Offset 966 " hexmask.long.byte 0x00 8.--15. 1. " INTID965 ,Interrupt ID965 Priority/Priority Byte Offset 965 " hexmask.long.byte 0x00 0.--7. 1. " INTID964 ,Interrupt ID964 Priority/Priority Byte Offset 964 " group.long 0x7C8++0x03 line.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242" hexmask.long.byte 0x00 24.--31. 1. " INTID971 ,Interrupt ID971 Priority/Priority Byte Offset 971 " hexmask.long.byte 0x00 16.--23. 1. " INTID970 ,Interrupt ID970 Priority/Priority Byte Offset 970 " hexmask.long.byte 0x00 8.--15. 1. " INTID969 ,Interrupt ID969 Priority/Priority Byte Offset 969 " hexmask.long.byte 0x00 0.--7. 1. " INTID968 ,Interrupt ID968 Priority/Priority Byte Offset 968 " group.long 0x7CC++0x03 line.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243" hexmask.long.byte 0x00 24.--31. 1. " INTID975 ,Interrupt ID975 Priority/Priority Byte Offset 975 " hexmask.long.byte 0x00 16.--23. 1. " INTID974 ,Interrupt ID974 Priority/Priority Byte Offset 974 " hexmask.long.byte 0x00 8.--15. 1. " INTID973 ,Interrupt ID973 Priority/Priority Byte Offset 973 " hexmask.long.byte 0x00 0.--7. 1. " INTID972 ,Interrupt ID972 Priority/Priority Byte Offset 972 " group.long 0x7D0++0x03 line.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244" hexmask.long.byte 0x00 24.--31. 1. " INTID979 ,Interrupt ID979 Priority/Priority Byte Offset 979 " hexmask.long.byte 0x00 16.--23. 1. " INTID978 ,Interrupt ID978 Priority/Priority Byte Offset 978 " hexmask.long.byte 0x00 8.--15. 1. " INTID977 ,Interrupt ID977 Priority/Priority Byte Offset 977 " hexmask.long.byte 0x00 0.--7. 1. " INTID976 ,Interrupt ID976 Priority/Priority Byte Offset 976 " group.long 0x7D4++0x03 line.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245" hexmask.long.byte 0x00 24.--31. 1. " INTID983 ,Interrupt ID983 Priority/Priority Byte Offset 983 " hexmask.long.byte 0x00 16.--23. 1. " INTID982 ,Interrupt ID982 Priority/Priority Byte Offset 982 " hexmask.long.byte 0x00 8.--15. 1. " INTID981 ,Interrupt ID981 Priority/Priority Byte Offset 981 " hexmask.long.byte 0x00 0.--7. 1. " INTID980 ,Interrupt ID980 Priority/Priority Byte Offset 980 " group.long 0x7D8++0x03 line.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246" hexmask.long.byte 0x00 24.--31. 1. " INTID987 ,Interrupt ID987 Priority/Priority Byte Offset 987 " hexmask.long.byte 0x00 16.--23. 1. " INTID986 ,Interrupt ID986 Priority/Priority Byte Offset 986 " hexmask.long.byte 0x00 8.--15. 1. " INTID985 ,Interrupt ID985 Priority/Priority Byte Offset 985 " hexmask.long.byte 0x00 0.--7. 1. " INTID984 ,Interrupt ID984 Priority/Priority Byte Offset 984 " group.long 0x7DC++0x03 line.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247" hexmask.long.byte 0x00 24.--31. 1. " INTID991 ,Interrupt ID991 Priority/Priority Byte Offset 991 " hexmask.long.byte 0x00 16.--23. 1. " INTID990 ,Interrupt ID990 Priority/Priority Byte Offset 990 " hexmask.long.byte 0x00 8.--15. 1. " INTID989 ,Interrupt ID989 Priority/Priority Byte Offset 989 " hexmask.long.byte 0x00 0.--7. 1. " INTID988 ,Interrupt ID988 Priority/Priority Byte Offset 988 " else hgroup.long 0x7C0++0x03 hide.long 0x00 "GICD_IPRIORITYR240,Interrupt Priority Register 240" hgroup.long 0x7C4++0x03 hide.long 0x00 "GICD_IPRIORITYR241,Interrupt Priority Register 241" hgroup.long 0x7C8++0x03 hide.long 0x00 "GICD_IPRIORITYR242,Interrupt Priority Register 242" hgroup.long 0x7CC++0x03 hide.long 0x00 "GICD_IPRIORITYR243,Interrupt Priority Register 243" hgroup.long 0x7D0++0x03 hide.long 0x00 "GICD_IPRIORITYR244,Interrupt Priority Register 244" hgroup.long 0x7D4++0x03 hide.long 0x00 "GICD_IPRIORITYR245,Interrupt Priority Register 245" hgroup.long 0x7D8++0x03 hide.long 0x00 "GICD_IPRIORITYR246,Interrupt Priority Register 246" hgroup.long 0x7DC++0x03 hide.long 0x00 "GICD_IPRIORITYR247,Interrupt Priority Register 247" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1F) group.long 0x7E0++0x03 line.long 0x00 "GICD_IPRIORITYR248,Interrupt Priority Register 248" hexmask.long.byte 0x00 24.--31. 1. " INTID995 ,Interrupt ID995 Priority/Priority Byte Offset 995 " hexmask.long.byte 0x00 16.--23. 1. " INTID994 ,Interrupt ID994 Priority/Priority Byte Offset 994 " hexmask.long.byte 0x00 8.--15. 1. " INTID993 ,Interrupt ID993 Priority/Priority Byte Offset 993 " hexmask.long.byte 0x00 0.--7. 1. " INTID992 ,Interrupt ID992 Priority/Priority Byte Offset 992 " group.long 0x7E4++0x03 line.long 0x00 "GICD_IPRIORITYR249,Interrupt Priority Register 249" hexmask.long.byte 0x00 24.--31. 1. " INTID999 ,Interrupt ID999 Priority/Priority Byte Offset 999 " hexmask.long.byte 0x00 16.--23. 1. " INTID998 ,Interrupt ID998 Priority/Priority Byte Offset 998 " hexmask.long.byte 0x00 8.--15. 1. " INTID997 ,Interrupt ID997 Priority/Priority Byte Offset 997 " hexmask.long.byte 0x00 0.--7. 1. " INTID996 ,Interrupt ID996 Priority/Priority Byte Offset 996 " group.long 0x7E8++0x03 line.long 0x00 "GICD_IPRIORITYR250,Interrupt Priority Register 250" hexmask.long.byte 0x00 24.--31. 1. " INTID1003 ,Interrupt ID1003 Priority/Priority Byte Offset 1003" hexmask.long.byte 0x00 16.--23. 1. " INTID1002 ,Interrupt ID1002 Priority/Priority Byte Offset 1002" hexmask.long.byte 0x00 8.--15. 1. " INTID1001 ,Interrupt ID1001 Priority/Priority Byte Offset 1001" hexmask.long.byte 0x00 0.--7. 1. " INTID1000 ,Interrupt ID1000 Priority/Priority Byte Offset 1000" group.long 0x7EC++0x03 line.long 0x00 "GICD_IPRIORITYR251,Interrupt Priority Register 251" hexmask.long.byte 0x00 24.--31. 1. " INTID1007 ,Interrupt ID1007 Priority/Priority Byte Offset 1007" hexmask.long.byte 0x00 16.--23. 1. " INTID1006 ,Interrupt ID1006 Priority/Priority Byte Offset 1006" hexmask.long.byte 0x00 8.--15. 1. " INTID1005 ,Interrupt ID1005 Priority/Priority Byte Offset 1005" hexmask.long.byte 0x00 0.--7. 1. " INTID1004 ,Interrupt ID1004 Priority/Priority Byte Offset 1004" group.long 0x7F0++0x03 line.long 0x00 "GICD_IPRIORITYR252,Interrupt Priority Register 252" hexmask.long.byte 0x00 24.--31. 1. " INTID1011 ,Interrupt ID1011 Priority/Priority Byte Offset 1011" hexmask.long.byte 0x00 16.--23. 1. " INTID1010 ,Interrupt ID1010 Priority/Priority Byte Offset 1010" hexmask.long.byte 0x00 8.--15. 1. " INTID1009 ,Interrupt ID1009 Priority/Priority Byte Offset 1009" hexmask.long.byte 0x00 0.--7. 1. " INTID1008 ,Interrupt ID1008 Priority/Priority Byte Offset 1008" group.long 0x7F4++0x03 line.long 0x00 "GICD_IPRIORITYR253,Interrupt Priority Register 253" hexmask.long.byte 0x00 24.--31. 1. " INTID1015 ,Interrupt ID1015 Priority/Priority Byte Offset 1015" hexmask.long.byte 0x00 16.--23. 1. " INTID1014 ,Interrupt ID1014 Priority/Priority Byte Offset 1014" hexmask.long.byte 0x00 8.--15. 1. " INTID1013 ,Interrupt ID1013 Priority/Priority Byte Offset 1013" hexmask.long.byte 0x00 0.--7. 1. " INTID1012 ,Interrupt ID1012 Priority/Priority Byte Offset 1012" group.long 0x7F8++0x03 line.long 0x00 "GICD_IPRIORITYR254,Interrupt Priority Register 254" hexmask.long.byte 0x00 24.--31. 1. " INTID1019 ,Interrupt ID1019 Priority/Priority Byte Offset 1019" hexmask.long.byte 0x00 16.--23. 1. " INTID1018 ,Interrupt ID1018 Priority/Priority Byte Offset 1018" hexmask.long.byte 0x00 8.--15. 1. " INTID1017 ,Interrupt ID1017 Priority/Priority Byte Offset 1017" hexmask.long.byte 0x00 0.--7. 1. " INTID1016 ,Interrupt ID1016 Priority/Priority Byte Offset 1016" else hgroup.long 0x7E0++0x03 hide.long 0x00 "GICD_IPRIORITYR248,Interrupt Priority Register 248" hgroup.long 0x7E4++0x03 hide.long 0x00 "GICD_IPRIORITYR249,Interrupt Priority Register 249" hgroup.long 0x7E8++0x03 hide.long 0x00 "GICD_IPRIORITYR250,Interrupt Priority Register 250" hgroup.long 0x7EC++0x03 hide.long 0x00 "GICD_IPRIORITYR251,Interrupt Priority Register 251" hgroup.long 0x7F0++0x03 hide.long 0x00 "GICD_IPRIORITYR252,Interrupt Priority Register 252" hgroup.long 0x7F4++0x03 hide.long 0x00 "GICD_IPRIORITYR253,Interrupt Priority Register 253" hgroup.long 0x7F8++0x03 hide.long 0x00 "GICD_IPRIORITYR254,Interrupt Priority Register 254" endif tree.end width 19. tree "Processor Targets Registers" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x000000E0)>0x1) rgroup.long 0x800++0x03 line.long 0x00 "GICD_ITARGETSR0,Interrupt Processor Targets Register 0" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO3 ,CPU Targets Byte Offset 3 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO2 ,CPU Targets Byte Offset 2 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1 ,CPU Targets Byte Offset 1 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO0 ,CPU Targets Byte Offset 0 " rgroup.long 0x804++0x03 line.long 0x00 "GICD_ITARGETSR1,Interrupt Processor Targets Register 1" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO7 ,CPU Targets Byte Offset 7 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO6 ,CPU Targets Byte Offset 6 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO5 ,CPU Targets Byte Offset 5 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO4 ,CPU Targets Byte Offset 4 " rgroup.long 0x808++0x03 line.long 0x00 "GICD_ITARGETSR2,Interrupt Processor Targets Register 2" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO11 ,CPU Targets Byte Offset 11 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO10 ,CPU Targets Byte Offset 10 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO9 ,CPU Targets Byte Offset 9 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO8 ,CPU Targets Byte Offset 8 " rgroup.long 0x80C++0x03 line.long 0x00 "GICD_ITARGETSR3,Interrupt Processor Targets Register 3" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO15 ,CPU Targets Byte Offset 15 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO14 ,CPU Targets Byte Offset 14 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO13 ,CPU Targets Byte Offset 13 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO12 ,CPU Targets Byte Offset 12 " rgroup.long 0x810++0x03 line.long 0x00 "GICD_ITARGETSR4,Interrupt Processor Targets Register 4" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO19 ,CPU Targets Byte Offset 19 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO18 ,CPU Targets Byte Offset 18 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO17 ,CPU Targets Byte Offset 17 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO16 ,CPU Targets Byte Offset 16 " rgroup.long 0x814++0x03 line.long 0x00 "GICD_ITARGETSR5,Interrupt Processor Targets Register 5" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO23 ,CPU Targets Byte Offset 23 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO22 ,CPU Targets Byte Offset 22 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO21 ,CPU Targets Byte Offset 21 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO20 ,CPU Targets Byte Offset 20 " rgroup.long 0x818++0x03 line.long 0x00 "GICD_ITARGETSR6,Interrupt Processor Targets Register 6" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO27 ,CPU Targets Byte Offset 27 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO26 ,CPU Targets Byte Offset 26 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO25 ,CPU Targets Byte Offset 25 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO24 ,CPU Targets Byte Offset 24 " rgroup.long 0x81C++0x03 line.long 0x00 "GICD_ITARGETSR7,Interrupt Processor Targets Register 7" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO31 ,CPU Targets Byte Offset 31 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO30 ,CPU Targets Byte Offset 30 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO29 ,CPU Targets Byte Offset 29 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO28 ,CPU Targets Byte Offset 28 " if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x01) group.long 0x820++0x03 line.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO35 ,CPU Targets Byte Offset 35 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO34 ,CPU Targets Byte Offset 34 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO33 ,CPU Targets Byte Offset 33 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO32 ,CPU Targets Byte Offset 32 " group.long 0x824++0x03 line.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO39 ,CPU Targets Byte Offset 39 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO38 ,CPU Targets Byte Offset 38 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO37 ,CPU Targets Byte Offset 37 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO36 ,CPU Targets Byte Offset 36 " group.long 0x828++0x03 line.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO43 ,CPU Targets Byte Offset 43 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO42 ,CPU Targets Byte Offset 42 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO41 ,CPU Targets Byte Offset 41 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO40 ,CPU Targets Byte Offset 40 " group.long 0x82C++0x03 line.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO47 ,CPU Targets Byte Offset 47 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO46 ,CPU Targets Byte Offset 46 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO45 ,CPU Targets Byte Offset 45 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO44 ,CPU Targets Byte Offset 44 " group.long 0x830++0x03 line.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO51 ,CPU Targets Byte Offset 51 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO50 ,CPU Targets Byte Offset 50 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO49 ,CPU Targets Byte Offset 49 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO48 ,CPU Targets Byte Offset 48 " group.long 0x834++0x03 line.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO55 ,CPU Targets Byte Offset 55 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO54 ,CPU Targets Byte Offset 54 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO53 ,CPU Targets Byte Offset 53 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO52 ,CPU Targets Byte Offset 52 " group.long 0x838++0x03 line.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO59 ,CPU Targets Byte Offset 59 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO58 ,CPU Targets Byte Offset 58 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO57 ,CPU Targets Byte Offset 57 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO56 ,CPU Targets Byte Offset 56 " group.long 0x83C++0x03 line.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO63 ,CPU Targets Byte Offset 63 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO62 ,CPU Targets Byte Offset 62 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO61 ,CPU Targets Byte Offset 61 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO60 ,CPU Targets Byte Offset 60 " else hgroup.long 0x820++0x03 hide.long 0x00 "GICD_ITARGETSR8,Interrupt Processor Targets Register 8" hgroup.long 0x824++0x03 hide.long 0x00 "GICD_ITARGETSR9,Interrupt Processor Targets Register 9" hgroup.long 0x828++0x03 hide.long 0x00 "GICD_ITARGETSR10,Interrupt Processor Targets Register 10" hgroup.long 0x82C++0x03 hide.long 0x00 "GICD_ITARGETSR11,Interrupt Processor Targets Register 11" hgroup.long 0x830++0x03 hide.long 0x00 "GICD_ITARGETSR12,Interrupt Processor Targets Register 12" hgroup.long 0x834++0x03 hide.long 0x00 "GICD_ITARGETSR13,Interrupt Processor Targets Register 13" hgroup.long 0x838++0x03 hide.long 0x00 "GICD_ITARGETSR14,Interrupt Processor Targets Register 14" hgroup.long 0x83C++0x03 hide.long 0x00 "GICD_ITARGETSR15,Interrupt Processor Targets Register 15" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x02) group.long 0x840++0x03 line.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO67 ,CPU Targets Byte Offset 67 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO66 ,CPU Targets Byte Offset 66 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO65 ,CPU Targets Byte Offset 65 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO64 ,CPU Targets Byte Offset 64 " group.long 0x844++0x03 line.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO71 ,CPU Targets Byte Offset 71 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO70 ,CPU Targets Byte Offset 70 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO69 ,CPU Targets Byte Offset 69 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO68 ,CPU Targets Byte Offset 68 " group.long 0x848++0x03 line.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO75 ,CPU Targets Byte Offset 75 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO74 ,CPU Targets Byte Offset 74 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO73 ,CPU Targets Byte Offset 73 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO72 ,CPU Targets Byte Offset 72 " group.long 0x84C++0x03 line.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO79 ,CPU Targets Byte Offset 79 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO78 ,CPU Targets Byte Offset 78 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO77 ,CPU Targets Byte Offset 77 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO76 ,CPU Targets Byte Offset 76 " group.long 0x850++0x03 line.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO83 ,CPU Targets Byte Offset 83 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO82 ,CPU Targets Byte Offset 82 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO81 ,CPU Targets Byte Offset 81 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO80 ,CPU Targets Byte Offset 80 " group.long 0x854++0x03 line.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO87 ,CPU Targets Byte Offset 87 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO86 ,CPU Targets Byte Offset 86 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO85 ,CPU Targets Byte Offset 85 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO84 ,CPU Targets Byte Offset 84 " group.long 0x858++0x03 line.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO91 ,CPU Targets Byte Offset 91 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO90 ,CPU Targets Byte Offset 90 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO89 ,CPU Targets Byte Offset 89 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO88 ,CPU Targets Byte Offset 88 " group.long 0x85C++0x03 line.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO95 ,CPU Targets Byte Offset 95 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO94 ,CPU Targets Byte Offset 94 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO93 ,CPU Targets Byte Offset 93 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO92 ,CPU Targets Byte Offset 92 " else hgroup.long 0x840++0x03 hide.long 0x00 "GICD_ITARGETSR16,Interrupt Processor Targets Register 16" hgroup.long 0x844++0x03 hide.long 0x00 "GICD_ITARGETSR17,Interrupt Processor Targets Register 17" hgroup.long 0x848++0x03 hide.long 0x00 "GICD_ITARGETSR18,Interrupt Processor Targets Register 18" hgroup.long 0x84C++0x03 hide.long 0x00 "GICD_ITARGETSR19,Interrupt Processor Targets Register 19" hgroup.long 0x850++0x03 hide.long 0x00 "GICD_ITARGETSR20,Interrupt Processor Targets Register 20" hgroup.long 0x854++0x03 hide.long 0x00 "GICD_ITARGETSR21,Interrupt Processor Targets Register 21" hgroup.long 0x858++0x03 hide.long 0x00 "GICD_ITARGETSR22,Interrupt Processor Targets Register 22" hgroup.long 0x85C++0x03 hide.long 0x00 "GICD_ITARGETSR23,Interrupt Processor Targets Register 23" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x03) group.long 0x860++0x03 line.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO99 ,CPU Targets Byte Offset 99 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO98 ,CPU Targets Byte Offset 98 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO97 ,CPU Targets Byte Offset 97 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO96 ,CPU Targets Byte Offset 96 " group.long 0x864++0x03 line.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO103 ,CPU Targets Byte Offset 103 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO102 ,CPU Targets Byte Offset 102 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO101 ,CPU Targets Byte Offset 101 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO100 ,CPU Targets Byte Offset 100 " group.long 0x868++0x03 line.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO107 ,CPU Targets Byte Offset 107 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO106 ,CPU Targets Byte Offset 106 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO105 ,CPU Targets Byte Offset 105 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO104 ,CPU Targets Byte Offset 104 " group.long 0x86C++0x03 line.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO111 ,CPU Targets Byte Offset 111 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO110 ,CPU Targets Byte Offset 110 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO109 ,CPU Targets Byte Offset 109 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO108 ,CPU Targets Byte Offset 108 " group.long 0x870++0x03 line.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO115 ,CPU Targets Byte Offset 115 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO114 ,CPU Targets Byte Offset 114 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO113 ,CPU Targets Byte Offset 113 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO112 ,CPU Targets Byte Offset 112 " group.long 0x874++0x03 line.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO119 ,CPU Targets Byte Offset 119 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO118 ,CPU Targets Byte Offset 118 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO117 ,CPU Targets Byte Offset 117 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO116 ,CPU Targets Byte Offset 116 " group.long 0x878++0x03 line.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO123 ,CPU Targets Byte Offset 123 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO122 ,CPU Targets Byte Offset 122 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO121 ,CPU Targets Byte Offset 121 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO120 ,CPU Targets Byte Offset 120 " group.long 0x87C++0x03 line.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO127 ,CPU Targets Byte Offset 127 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO126 ,CPU Targets Byte Offset 126 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO125 ,CPU Targets Byte Offset 125 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO124 ,CPU Targets Byte Offset 124 " else hgroup.long 0x860++0x03 hide.long 0x00 "GICD_ITARGETSR24,Interrupt Processor Targets Register 24" hgroup.long 0x864++0x03 hide.long 0x00 "GICD_ITARGETSR25,Interrupt Processor Targets Register 25" hgroup.long 0x868++0x03 hide.long 0x00 "GICD_ITARGETSR26,Interrupt Processor Targets Register 26" hgroup.long 0x86C++0x03 hide.long 0x00 "GICD_ITARGETSR27,Interrupt Processor Targets Register 27" hgroup.long 0x870++0x03 hide.long 0x00 "GICD_ITARGETSR28,Interrupt Processor Targets Register 28" hgroup.long 0x874++0x03 hide.long 0x00 "GICD_ITARGETSR29,Interrupt Processor Targets Register 29" hgroup.long 0x878++0x03 hide.long 0x00 "GICD_ITARGETSR30,Interrupt Processor Targets Register 30" hgroup.long 0x87C++0x03 hide.long 0x00 "GICD_ITARGETSR31,Interrupt Processor Targets Register 31" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x04) group.long 0x880++0x03 line.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO131 ,CPU Targets Byte Offset 131 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO130 ,CPU Targets Byte Offset 130 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO129 ,CPU Targets Byte Offset 129 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO128 ,CPU Targets Byte Offset 128 " group.long 0x884++0x03 line.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO135 ,CPU Targets Byte Offset 135 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO134 ,CPU Targets Byte Offset 134 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO133 ,CPU Targets Byte Offset 133 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO132 ,CPU Targets Byte Offset 132 " group.long 0x888++0x03 line.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO139 ,CPU Targets Byte Offset 139 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO138 ,CPU Targets Byte Offset 138 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO137 ,CPU Targets Byte Offset 137 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO136 ,CPU Targets Byte Offset 136 " group.long 0x88C++0x03 line.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO143 ,CPU Targets Byte Offset 143 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO142 ,CPU Targets Byte Offset 142 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO141 ,CPU Targets Byte Offset 141 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO140 ,CPU Targets Byte Offset 140 " group.long 0x890++0x03 line.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO147 ,CPU Targets Byte Offset 147 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO146 ,CPU Targets Byte Offset 146 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO145 ,CPU Targets Byte Offset 145 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO144 ,CPU Targets Byte Offset 144 " group.long 0x894++0x03 line.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO151 ,CPU Targets Byte Offset 151 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO150 ,CPU Targets Byte Offset 150 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO149 ,CPU Targets Byte Offset 149 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO148 ,CPU Targets Byte Offset 148 " group.long 0x898++0x03 line.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO155 ,CPU Targets Byte Offset 155 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO154 ,CPU Targets Byte Offset 154 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO153 ,CPU Targets Byte Offset 153 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO152 ,CPU Targets Byte Offset 152 " group.long 0x89C++0x03 line.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO159 ,CPU Targets Byte Offset 159 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO158 ,CPU Targets Byte Offset 158 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO157 ,CPU Targets Byte Offset 157 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO156 ,CPU Targets Byte Offset 156 " else hgroup.long 0x880++0x03 hide.long 0x00 "GICD_ITARGETSR32,Interrupt Processor Targets Register 32" hgroup.long 0x884++0x03 hide.long 0x00 "GICD_ITARGETSR33,Interrupt Processor Targets Register 33" hgroup.long 0x888++0x03 hide.long 0x00 "GICD_ITARGETSR34,Interrupt Processor Targets Register 34" hgroup.long 0x88C++0x03 hide.long 0x00 "GICD_ITARGETSR35,Interrupt Processor Targets Register 35" hgroup.long 0x890++0x03 hide.long 0x00 "GICD_ITARGETSR36,Interrupt Processor Targets Register 36" hgroup.long 0x894++0x03 hide.long 0x00 "GICD_ITARGETSR37,Interrupt Processor Targets Register 37" hgroup.long 0x898++0x03 hide.long 0x00 "GICD_ITARGETSR38,Interrupt Processor Targets Register 38" hgroup.long 0x89C++0x03 hide.long 0x00 "GICD_ITARGETSR39,Interrupt Processor Targets Register 39" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x05) group.long 0x8A0++0x03 line.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO163 ,CPU Targets Byte Offset 163 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO162 ,CPU Targets Byte Offset 162 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO161 ,CPU Targets Byte Offset 161 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO160 ,CPU Targets Byte Offset 160 " group.long 0x8A4++0x03 line.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO167 ,CPU Targets Byte Offset 167 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO166 ,CPU Targets Byte Offset 166 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO165 ,CPU Targets Byte Offset 165 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO164 ,CPU Targets Byte Offset 164 " group.long 0x8A8++0x03 line.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO171 ,CPU Targets Byte Offset 171 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO170 ,CPU Targets Byte Offset 170 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO169 ,CPU Targets Byte Offset 169 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO168 ,CPU Targets Byte Offset 168 " group.long 0x8AC++0x03 line.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO175 ,CPU Targets Byte Offset 175 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO174 ,CPU Targets Byte Offset 174 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO173 ,CPU Targets Byte Offset 173 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO172 ,CPU Targets Byte Offset 172 " group.long 0x8B0++0x03 line.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO179 ,CPU Targets Byte Offset 179 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO178 ,CPU Targets Byte Offset 178 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO177 ,CPU Targets Byte Offset 177 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO176 ,CPU Targets Byte Offset 176 " group.long 0x8B4++0x03 line.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO183 ,CPU Targets Byte Offset 183 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO182 ,CPU Targets Byte Offset 182 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO181 ,CPU Targets Byte Offset 181 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO180 ,CPU Targets Byte Offset 180 " group.long 0x8B8++0x03 line.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO187 ,CPU Targets Byte Offset 187 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO186 ,CPU Targets Byte Offset 186 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO185 ,CPU Targets Byte Offset 185 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO184 ,CPU Targets Byte Offset 184 " group.long 0x8BC++0x03 line.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO191 ,CPU Targets Byte Offset 191 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO190 ,CPU Targets Byte Offset 190 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO189 ,CPU Targets Byte Offset 189 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO188 ,CPU Targets Byte Offset 188 " else hgroup.long 0x8A0++0x03 hide.long 0x00 "GICD_ITARGETSR40,Interrupt Processor Targets Register 40" hgroup.long 0x8A4++0x03 hide.long 0x00 "GICD_ITARGETSR41,Interrupt Processor Targets Register 41" hgroup.long 0x8A8++0x03 hide.long 0x00 "GICD_ITARGETSR42,Interrupt Processor Targets Register 42" hgroup.long 0x8AC++0x03 hide.long 0x00 "GICD_ITARGETSR43,Interrupt Processor Targets Register 43" hgroup.long 0x8B0++0x03 hide.long 0x00 "GICD_ITARGETSR44,Interrupt Processor Targets Register 44" hgroup.long 0x8B4++0x03 hide.long 0x00 "GICD_ITARGETSR45,Interrupt Processor Targets Register 45" hgroup.long 0x8B8++0x03 hide.long 0x00 "GICD_ITARGETSR46,Interrupt Processor Targets Register 46" hgroup.long 0x8BC++0x03 hide.long 0x00 "GICD_ITARGETSR47,Interrupt Processor Targets Register 47" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x06) group.long 0x8C0++0x03 line.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO195 ,CPU Targets Byte Offset 195 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO194 ,CPU Targets Byte Offset 194 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO193 ,CPU Targets Byte Offset 193 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO192 ,CPU Targets Byte Offset 192 " group.long 0x8C4++0x03 line.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO199 ,CPU Targets Byte Offset 199 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO198 ,CPU Targets Byte Offset 198 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO197 ,CPU Targets Byte Offset 197 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO196 ,CPU Targets Byte Offset 196 " group.long 0x8C8++0x03 line.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO203 ,CPU Targets Byte Offset 203 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO202 ,CPU Targets Byte Offset 202 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO201 ,CPU Targets Byte Offset 201 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO200 ,CPU Targets Byte Offset 200 " group.long 0x8CC++0x03 line.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO207 ,CPU Targets Byte Offset 207 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO206 ,CPU Targets Byte Offset 206 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO205 ,CPU Targets Byte Offset 205 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO204 ,CPU Targets Byte Offset 204 " group.long 0x8D0++0x03 line.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO211 ,CPU Targets Byte Offset 211 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO210 ,CPU Targets Byte Offset 210 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO209 ,CPU Targets Byte Offset 209 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO208 ,CPU Targets Byte Offset 208 " group.long 0x8D4++0x03 line.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO215 ,CPU Targets Byte Offset 215 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO214 ,CPU Targets Byte Offset 214 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO213 ,CPU Targets Byte Offset 213 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO212 ,CPU Targets Byte Offset 212 " group.long 0x8D8++0x03 line.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO219 ,CPU Targets Byte Offset 219 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO218 ,CPU Targets Byte Offset 218 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO217 ,CPU Targets Byte Offset 217 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO216 ,CPU Targets Byte Offset 216 " group.long 0x8DC++0x03 line.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO223 ,CPU Targets Byte Offset 223 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO222 ,CPU Targets Byte Offset 222 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO221 ,CPU Targets Byte Offset 221 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO220 ,CPU Targets Byte Offset 220 " else hgroup.long 0x8C0++0x03 hide.long 0x00 "GICD_ITARGETSR48,Interrupt Processor Targets Register 48" hgroup.long 0x8C4++0x03 hide.long 0x00 "GICD_ITARGETSR49,Interrupt Processor Targets Register 49" hgroup.long 0x8C8++0x03 hide.long 0x00 "GICD_ITARGETSR50,Interrupt Processor Targets Register 50" hgroup.long 0x8CC++0x03 hide.long 0x00 "GICD_ITARGETSR51,Interrupt Processor Targets Register 51" hgroup.long 0x8D0++0x03 hide.long 0x00 "GICD_ITARGETSR52,Interrupt Processor Targets Register 52" hgroup.long 0x8D4++0x03 hide.long 0x00 "GICD_ITARGETSR53,Interrupt Processor Targets Register 53" hgroup.long 0x8D8++0x03 hide.long 0x00 "GICD_ITARGETSR54,Interrupt Processor Targets Register 54" hgroup.long 0x8DC++0x03 hide.long 0x00 "GICD_ITARGETSR55,Interrupt Processor Targets Register 55" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x07) group.long 0x8E0++0x03 line.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO227 ,CPU Targets Byte Offset 227 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO226 ,CPU Targets Byte Offset 226 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO225 ,CPU Targets Byte Offset 225 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO224 ,CPU Targets Byte Offset 224 " group.long 0x8E4++0x03 line.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO231 ,CPU Targets Byte Offset 231 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO230 ,CPU Targets Byte Offset 230 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO229 ,CPU Targets Byte Offset 229 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO228 ,CPU Targets Byte Offset 228 " group.long 0x8E8++0x03 line.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO235 ,CPU Targets Byte Offset 235 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO234 ,CPU Targets Byte Offset 234 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO233 ,CPU Targets Byte Offset 233 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO232 ,CPU Targets Byte Offset 232 " group.long 0x8EC++0x03 line.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO239 ,CPU Targets Byte Offset 239 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO238 ,CPU Targets Byte Offset 238 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO237 ,CPU Targets Byte Offset 237 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO236 ,CPU Targets Byte Offset 236 " group.long 0x8F0++0x03 line.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO243 ,CPU Targets Byte Offset 243 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO242 ,CPU Targets Byte Offset 242 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO241 ,CPU Targets Byte Offset 241 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO240 ,CPU Targets Byte Offset 240 " group.long 0x8F4++0x03 line.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO247 ,CPU Targets Byte Offset 247 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO246 ,CPU Targets Byte Offset 246 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO245 ,CPU Targets Byte Offset 245 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO244 ,CPU Targets Byte Offset 244 " group.long 0x8F8++0x03 line.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO251 ,CPU Targets Byte Offset 251 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO250 ,CPU Targets Byte Offset 250 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO249 ,CPU Targets Byte Offset 249 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO248 ,CPU Targets Byte Offset 248 " group.long 0x8FC++0x03 line.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO255 ,CPU Targets Byte Offset 255 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO254 ,CPU Targets Byte Offset 254 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO253 ,CPU Targets Byte Offset 253 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO252 ,CPU Targets Byte Offset 252 " else hgroup.long 0x8E0++0x03 hide.long 0x00 "GICD_ITARGETSR56,Interrupt Processor Targets Register 56" hgroup.long 0x8E4++0x03 hide.long 0x00 "GICD_ITARGETSR57,Interrupt Processor Targets Register 57" hgroup.long 0x8E8++0x03 hide.long 0x00 "GICD_ITARGETSR58,Interrupt Processor Targets Register 58" hgroup.long 0x8EC++0x03 hide.long 0x00 "GICD_ITARGETSR59,Interrupt Processor Targets Register 59" hgroup.long 0x8F0++0x03 hide.long 0x00 "GICD_ITARGETSR60,Interrupt Processor Targets Register 60" hgroup.long 0x8F4++0x03 hide.long 0x00 "GICD_ITARGETSR61,Interrupt Processor Targets Register 61" hgroup.long 0x8F8++0x03 hide.long 0x00 "GICD_ITARGETSR62,Interrupt Processor Targets Register 62" hgroup.long 0x8FC++0x03 hide.long 0x00 "GICD_ITARGETSR63,Interrupt Processor Targets Register 63" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x08) group.long 0x900++0x03 line.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO259 ,CPU Targets Byte Offset 259 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO258 ,CPU Targets Byte Offset 258 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO257 ,CPU Targets Byte Offset 257 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO256 ,CPU Targets Byte Offset 256 " group.long 0x904++0x03 line.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO263 ,CPU Targets Byte Offset 263 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO262 ,CPU Targets Byte Offset 262 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO261 ,CPU Targets Byte Offset 261 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO260 ,CPU Targets Byte Offset 260 " group.long 0x908++0x03 line.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO267 ,CPU Targets Byte Offset 267 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO266 ,CPU Targets Byte Offset 266 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO265 ,CPU Targets Byte Offset 265 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO264 ,CPU Targets Byte Offset 264 " group.long 0x90C++0x03 line.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO271 ,CPU Targets Byte Offset 271 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO270 ,CPU Targets Byte Offset 270 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO269 ,CPU Targets Byte Offset 269 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO268 ,CPU Targets Byte Offset 268 " group.long 0x910++0x03 line.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO275 ,CPU Targets Byte Offset 275 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO274 ,CPU Targets Byte Offset 274 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO273 ,CPU Targets Byte Offset 273 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO272 ,CPU Targets Byte Offset 272 " group.long 0x914++0x03 line.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO279 ,CPU Targets Byte Offset 279 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO278 ,CPU Targets Byte Offset 278 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO277 ,CPU Targets Byte Offset 277 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO276 ,CPU Targets Byte Offset 276 " group.long 0x918++0x03 line.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO283 ,CPU Targets Byte Offset 283 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO282 ,CPU Targets Byte Offset 282 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO281 ,CPU Targets Byte Offset 281 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO280 ,CPU Targets Byte Offset 280 " group.long 0x91C++0x03 line.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO287 ,CPU Targets Byte Offset 287 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO286 ,CPU Targets Byte Offset 286 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO285 ,CPU Targets Byte Offset 285 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO284 ,CPU Targets Byte Offset 284 " else hgroup.long 0x900++0x03 hide.long 0x00 "GICD_ITARGETSR64,Interrupt Processor Targets Register 64" hgroup.long 0x904++0x03 hide.long 0x00 "GICD_ITARGETSR65,Interrupt Processor Targets Register 65" hgroup.long 0x908++0x03 hide.long 0x00 "GICD_ITARGETSR66,Interrupt Processor Targets Register 66" hgroup.long 0x90C++0x03 hide.long 0x00 "GICD_ITARGETSR67,Interrupt Processor Targets Register 67" hgroup.long 0x910++0x03 hide.long 0x00 "GICD_ITARGETSR68,Interrupt Processor Targets Register 68" hgroup.long 0x914++0x03 hide.long 0x00 "GICD_ITARGETSR69,Interrupt Processor Targets Register 69" hgroup.long 0x918++0x03 hide.long 0x00 "GICD_ITARGETSR70,Interrupt Processor Targets Register 70" hgroup.long 0x91C++0x03 hide.long 0x00 "GICD_ITARGETSR71,Interrupt Processor Targets Register 71" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x09) group.long 0x920++0x03 line.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO291 ,CPU Targets Byte Offset 291 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO290 ,CPU Targets Byte Offset 290 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO289 ,CPU Targets Byte Offset 289 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO288 ,CPU Targets Byte Offset 288 " group.long 0x924++0x03 line.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO295 ,CPU Targets Byte Offset 295 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO294 ,CPU Targets Byte Offset 294 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO293 ,CPU Targets Byte Offset 293 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO292 ,CPU Targets Byte Offset 292 " group.long 0x928++0x03 line.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO299 ,CPU Targets Byte Offset 299 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO298 ,CPU Targets Byte Offset 298 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO297 ,CPU Targets Byte Offset 297 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO296 ,CPU Targets Byte Offset 296 " group.long 0x92C++0x03 line.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO303 ,CPU Targets Byte Offset 303 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO302 ,CPU Targets Byte Offset 302 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO301 ,CPU Targets Byte Offset 301 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO300 ,CPU Targets Byte Offset 300 " group.long 0x930++0x03 line.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO307 ,CPU Targets Byte Offset 307 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO306 ,CPU Targets Byte Offset 306 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO305 ,CPU Targets Byte Offset 305 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO304 ,CPU Targets Byte Offset 304 " group.long 0x934++0x03 line.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO311 ,CPU Targets Byte Offset 311 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO310 ,CPU Targets Byte Offset 310 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO309 ,CPU Targets Byte Offset 309 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO308 ,CPU Targets Byte Offset 308 " group.long 0x938++0x03 line.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO315 ,CPU Targets Byte Offset 315 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO314 ,CPU Targets Byte Offset 314 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO313 ,CPU Targets Byte Offset 313 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO312 ,CPU Targets Byte Offset 312 " group.long 0x93C++0x03 line.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO319 ,CPU Targets Byte Offset 319 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO318 ,CPU Targets Byte Offset 318 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO317 ,CPU Targets Byte Offset 317 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO316 ,CPU Targets Byte Offset 316 " else hgroup.long 0x920++0x03 hide.long 0x00 "GICD_ITARGETSR72,Interrupt Processor Targets Register 72" hgroup.long 0x924++0x03 hide.long 0x00 "GICD_ITARGETSR73,Interrupt Processor Targets Register 73" hgroup.long 0x928++0x03 hide.long 0x00 "GICD_ITARGETSR74,Interrupt Processor Targets Register 74" hgroup.long 0x92C++0x03 hide.long 0x00 "GICD_ITARGETSR75,Interrupt Processor Targets Register 75" hgroup.long 0x930++0x03 hide.long 0x00 "GICD_ITARGETSR76,Interrupt Processor Targets Register 76" hgroup.long 0x934++0x03 hide.long 0x00 "GICD_ITARGETSR77,Interrupt Processor Targets Register 77" hgroup.long 0x938++0x03 hide.long 0x00 "GICD_ITARGETSR78,Interrupt Processor Targets Register 78" hgroup.long 0x93C++0x03 hide.long 0x00 "GICD_ITARGETSR79,Interrupt Processor Targets Register 79" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0A) group.long 0x940++0x03 line.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO323 ,CPU Targets Byte Offset 323 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO322 ,CPU Targets Byte Offset 322 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO321 ,CPU Targets Byte Offset 321 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO320 ,CPU Targets Byte Offset 320 " group.long 0x944++0x03 line.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO327 ,CPU Targets Byte Offset 327 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO326 ,CPU Targets Byte Offset 326 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO325 ,CPU Targets Byte Offset 325 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO324 ,CPU Targets Byte Offset 324 " group.long 0x948++0x03 line.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO331 ,CPU Targets Byte Offset 331 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO330 ,CPU Targets Byte Offset 330 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO329 ,CPU Targets Byte Offset 329 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO328 ,CPU Targets Byte Offset 328 " group.long 0x94C++0x03 line.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO335 ,CPU Targets Byte Offset 335 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO334 ,CPU Targets Byte Offset 334 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO333 ,CPU Targets Byte Offset 333 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO332 ,CPU Targets Byte Offset 332 " group.long 0x950++0x03 line.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO339 ,CPU Targets Byte Offset 339 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO338 ,CPU Targets Byte Offset 338 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO337 ,CPU Targets Byte Offset 337 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO336 ,CPU Targets Byte Offset 336 " group.long 0x954++0x03 line.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO343 ,CPU Targets Byte Offset 343 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO342 ,CPU Targets Byte Offset 342 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO341 ,CPU Targets Byte Offset 341 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO340 ,CPU Targets Byte Offset 340 " group.long 0x958++0x03 line.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO347 ,CPU Targets Byte Offset 347 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO346 ,CPU Targets Byte Offset 346 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO345 ,CPU Targets Byte Offset 345 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO344 ,CPU Targets Byte Offset 344 " group.long 0x95C++0x03 line.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO351 ,CPU Targets Byte Offset 351 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO350 ,CPU Targets Byte Offset 350 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO349 ,CPU Targets Byte Offset 349 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO348 ,CPU Targets Byte Offset 348 " else hgroup.long 0x940++0x03 hide.long 0x00 "GICD_ITARGETSR80,Interrupt Processor Targets Register 80" hgroup.long 0x944++0x03 hide.long 0x00 "GICD_ITARGETSR81,Interrupt Processor Targets Register 81" hgroup.long 0x948++0x03 hide.long 0x00 "GICD_ITARGETSR82,Interrupt Processor Targets Register 82" hgroup.long 0x94C++0x03 hide.long 0x00 "GICD_ITARGETSR83,Interrupt Processor Targets Register 83" hgroup.long 0x950++0x03 hide.long 0x00 "GICD_ITARGETSR84,Interrupt Processor Targets Register 84" hgroup.long 0x954++0x03 hide.long 0x00 "GICD_ITARGETSR85,Interrupt Processor Targets Register 85" hgroup.long 0x958++0x03 hide.long 0x00 "GICD_ITARGETSR86,Interrupt Processor Targets Register 86" hgroup.long 0x95C++0x03 hide.long 0x00 "GICD_ITARGETSR87,Interrupt Processor Targets Register 87" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0B) group.long 0x960++0x03 line.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO355 ,CPU Targets Byte Offset 355 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO354 ,CPU Targets Byte Offset 354 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO353 ,CPU Targets Byte Offset 353 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO352 ,CPU Targets Byte Offset 352 " group.long 0x964++0x03 line.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO359 ,CPU Targets Byte Offset 359 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO358 ,CPU Targets Byte Offset 358 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO357 ,CPU Targets Byte Offset 357 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO356 ,CPU Targets Byte Offset 356 " group.long 0x968++0x03 line.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO363 ,CPU Targets Byte Offset 363 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO362 ,CPU Targets Byte Offset 362 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO361 ,CPU Targets Byte Offset 361 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO360 ,CPU Targets Byte Offset 360 " group.long 0x96C++0x03 line.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO367 ,CPU Targets Byte Offset 367 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO366 ,CPU Targets Byte Offset 366 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO365 ,CPU Targets Byte Offset 365 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO364 ,CPU Targets Byte Offset 364 " group.long 0x970++0x03 line.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO371 ,CPU Targets Byte Offset 371 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO370 ,CPU Targets Byte Offset 370 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO369 ,CPU Targets Byte Offset 369 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO368 ,CPU Targets Byte Offset 368 " group.long 0x974++0x03 line.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO375 ,CPU Targets Byte Offset 375 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO374 ,CPU Targets Byte Offset 374 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO373 ,CPU Targets Byte Offset 373 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO372 ,CPU Targets Byte Offset 372 " group.long 0x978++0x03 line.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO379 ,CPU Targets Byte Offset 379 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO378 ,CPU Targets Byte Offset 378 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO377 ,CPU Targets Byte Offset 377 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO376 ,CPU Targets Byte Offset 376 " group.long 0x97C++0x03 line.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO383 ,CPU Targets Byte Offset 383 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO382 ,CPU Targets Byte Offset 382 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO381 ,CPU Targets Byte Offset 381 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO380 ,CPU Targets Byte Offset 380 " else hgroup.long 0x960++0x03 hide.long 0x00 "GICD_ITARGETSR88,Interrupt Processor Targets Register 88" hgroup.long 0x964++0x03 hide.long 0x00 "GICD_ITARGETSR89,Interrupt Processor Targets Register 89" hgroup.long 0x968++0x03 hide.long 0x00 "GICD_ITARGETSR90,Interrupt Processor Targets Register 90" hgroup.long 0x96C++0x03 hide.long 0x00 "GICD_ITARGETSR91,Interrupt Processor Targets Register 91" hgroup.long 0x970++0x03 hide.long 0x00 "GICD_ITARGETSR92,Interrupt Processor Targets Register 92" hgroup.long 0x974++0x03 hide.long 0x00 "GICD_ITARGETSR93,Interrupt Processor Targets Register 93" hgroup.long 0x978++0x03 hide.long 0x00 "GICD_ITARGETSR94,Interrupt Processor Targets Register 94" hgroup.long 0x97C++0x03 hide.long 0x00 "GICD_ITARGETSR95,Interrupt Processor Targets Register 95" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0C) group.long 0x980++0x03 line.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO387 ,CPU Targets Byte Offset 387 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO386 ,CPU Targets Byte Offset 386 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO385 ,CPU Targets Byte Offset 385 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO384 ,CPU Targets Byte Offset 384 " group.long 0x984++0x03 line.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO391 ,CPU Targets Byte Offset 391 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO390 ,CPU Targets Byte Offset 390 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO389 ,CPU Targets Byte Offset 389 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO388 ,CPU Targets Byte Offset 388 " group.long 0x988++0x03 line.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO395 ,CPU Targets Byte Offset 395 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO394 ,CPU Targets Byte Offset 394 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO393 ,CPU Targets Byte Offset 393 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO392 ,CPU Targets Byte Offset 392 " group.long 0x98C++0x03 line.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO399 ,CPU Targets Byte Offset 399 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO398 ,CPU Targets Byte Offset 398 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO397 ,CPU Targets Byte Offset 397 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO396 ,CPU Targets Byte Offset 396 " group.long 0x990++0x03 line.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO403 ,CPU Targets Byte Offset 403 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO402 ,CPU Targets Byte Offset 402 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO401 ,CPU Targets Byte Offset 401 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO400 ,CPU Targets Byte Offset 400 " group.long 0x994++0x03 line.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO407 ,CPU Targets Byte Offset 407 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO406 ,CPU Targets Byte Offset 406 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO405 ,CPU Targets Byte Offset 405 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO404 ,CPU Targets Byte Offset 404 " group.long 0x998++0x03 line.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO411 ,CPU Targets Byte Offset 411 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO410 ,CPU Targets Byte Offset 410 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO409 ,CPU Targets Byte Offset 409 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO408 ,CPU Targets Byte Offset 408 " group.long 0x99C++0x03 line.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO415 ,CPU Targets Byte Offset 415 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO414 ,CPU Targets Byte Offset 414 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO413 ,CPU Targets Byte Offset 413 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO412 ,CPU Targets Byte Offset 412 " else hgroup.long 0x980++0x03 hide.long 0x00 "GICD_ITARGETSR96,Interrupt Processor Targets Register 96" hgroup.long 0x984++0x03 hide.long 0x00 "GICD_ITARGETSR97,Interrupt Processor Targets Register 97" hgroup.long 0x988++0x03 hide.long 0x00 "GICD_ITARGETSR98,Interrupt Processor Targets Register 98" hgroup.long 0x98C++0x03 hide.long 0x00 "GICD_ITARGETSR99,Interrupt Processor Targets Register 99" hgroup.long 0x990++0x03 hide.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hgroup.long 0x994++0x03 hide.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hgroup.long 0x998++0x03 hide.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hgroup.long 0x99C++0x03 hide.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0D) group.long 0x9A0++0x03 line.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO419 ,CPU Targets Byte Offset 419 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO418 ,CPU Targets Byte Offset 418 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO417 ,CPU Targets Byte Offset 417 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO416 ,CPU Targets Byte Offset 416 " group.long 0x9A4++0x03 line.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO423 ,CPU Targets Byte Offset 423 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO422 ,CPU Targets Byte Offset 422 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO421 ,CPU Targets Byte Offset 421 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO420 ,CPU Targets Byte Offset 420 " group.long 0x9A8++0x03 line.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO427 ,CPU Targets Byte Offset 427 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO426 ,CPU Targets Byte Offset 426 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO425 ,CPU Targets Byte Offset 425 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO424 ,CPU Targets Byte Offset 424 " group.long 0x9AC++0x03 line.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO431 ,CPU Targets Byte Offset 431 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO430 ,CPU Targets Byte Offset 430 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO429 ,CPU Targets Byte Offset 429 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO428 ,CPU Targets Byte Offset 428 " group.long 0x9B0++0x03 line.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO435 ,CPU Targets Byte Offset 435 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO434 ,CPU Targets Byte Offset 434 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO433 ,CPU Targets Byte Offset 433 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO432 ,CPU Targets Byte Offset 432 " group.long 0x9B4++0x03 line.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO439 ,CPU Targets Byte Offset 439 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO438 ,CPU Targets Byte Offset 438 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO437 ,CPU Targets Byte Offset 437 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO436 ,CPU Targets Byte Offset 436 " group.long 0x9B8++0x03 line.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO443 ,CPU Targets Byte Offset 443 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO442 ,CPU Targets Byte Offset 442 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO441 ,CPU Targets Byte Offset 441 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO440 ,CPU Targets Byte Offset 440 " group.long 0x9BC++0x03 line.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO447 ,CPU Targets Byte Offset 447 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO446 ,CPU Targets Byte Offset 446 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO445 ,CPU Targets Byte Offset 445 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO444 ,CPU Targets Byte Offset 444 " else hgroup.long 0x9A0++0x03 hide.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hgroup.long 0x9A4++0x03 hide.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hgroup.long 0x9A8++0x03 hide.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hgroup.long 0x9AC++0x03 hide.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hgroup.long 0x9B0++0x03 hide.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hgroup.long 0x9B4++0x03 hide.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hgroup.long 0x9B8++0x03 hide.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hgroup.long 0x9BC++0x03 hide.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0E) group.long 0x9C0++0x03 line.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO451 ,CPU Targets Byte Offset 451 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO450 ,CPU Targets Byte Offset 450 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO449 ,CPU Targets Byte Offset 449 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO448 ,CPU Targets Byte Offset 448 " group.long 0x9C4++0x03 line.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO455 ,CPU Targets Byte Offset 455 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO454 ,CPU Targets Byte Offset 454 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO453 ,CPU Targets Byte Offset 453 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO452 ,CPU Targets Byte Offset 452 " group.long 0x9C8++0x03 line.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO459 ,CPU Targets Byte Offset 459 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO458 ,CPU Targets Byte Offset 458 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO457 ,CPU Targets Byte Offset 457 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO456 ,CPU Targets Byte Offset 456 " group.long 0x9CC++0x03 line.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO463 ,CPU Targets Byte Offset 463 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO462 ,CPU Targets Byte Offset 462 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO461 ,CPU Targets Byte Offset 461 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO460 ,CPU Targets Byte Offset 460 " group.long 0x9D0++0x03 line.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO467 ,CPU Targets Byte Offset 467 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO466 ,CPU Targets Byte Offset 466 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO465 ,CPU Targets Byte Offset 465 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO464 ,CPU Targets Byte Offset 464 " group.long 0x9D4++0x03 line.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO471 ,CPU Targets Byte Offset 471 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO470 ,CPU Targets Byte Offset 470 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO469 ,CPU Targets Byte Offset 469 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO468 ,CPU Targets Byte Offset 468 " group.long 0x9D8++0x03 line.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO475 ,CPU Targets Byte Offset 475 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO474 ,CPU Targets Byte Offset 474 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO473 ,CPU Targets Byte Offset 473 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO472 ,CPU Targets Byte Offset 472 " group.long 0x9DC++0x03 line.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO479 ,CPU Targets Byte Offset 479 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO478 ,CPU Targets Byte Offset 478 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO477 ,CPU Targets Byte Offset 477 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO476 ,CPU Targets Byte Offset 476 " else hgroup.long 0x9C0++0x03 hide.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hgroup.long 0x9C4++0x03 hide.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hgroup.long 0x9C8++0x03 hide.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hgroup.long 0x9CC++0x03 hide.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hgroup.long 0x9D0++0x03 hide.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hgroup.long 0x9D4++0x03 hide.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hgroup.long 0x9D8++0x03 hide.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hgroup.long 0x9DC++0x03 hide.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0F) group.long 0x9E0++0x03 line.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO483 ,CPU Targets Byte Offset 483 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO482 ,CPU Targets Byte Offset 482 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO481 ,CPU Targets Byte Offset 481 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO480 ,CPU Targets Byte Offset 480 " group.long 0x9E4++0x03 line.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO487 ,CPU Targets Byte Offset 487 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO486 ,CPU Targets Byte Offset 486 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO485 ,CPU Targets Byte Offset 485 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO484 ,CPU Targets Byte Offset 484 " group.long 0x9E8++0x03 line.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO491 ,CPU Targets Byte Offset 491 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO490 ,CPU Targets Byte Offset 490 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO489 ,CPU Targets Byte Offset 489 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO488 ,CPU Targets Byte Offset 488 " group.long 0x9EC++0x03 line.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO495 ,CPU Targets Byte Offset 495 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO494 ,CPU Targets Byte Offset 494 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO493 ,CPU Targets Byte Offset 493 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO492 ,CPU Targets Byte Offset 492 " group.long 0x9F0++0x03 line.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO499 ,CPU Targets Byte Offset 499 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO498 ,CPU Targets Byte Offset 498 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO497 ,CPU Targets Byte Offset 497 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO496 ,CPU Targets Byte Offset 496 " group.long 0x9F4++0x03 line.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO503 ,CPU Targets Byte Offset 503 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO502 ,CPU Targets Byte Offset 502 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO501 ,CPU Targets Byte Offset 501 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO500 ,CPU Targets Byte Offset 500 " group.long 0x9F8++0x03 line.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO507 ,CPU Targets Byte Offset 507 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO506 ,CPU Targets Byte Offset 506 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO505 ,CPU Targets Byte Offset 505 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO504 ,CPU Targets Byte Offset 504 " group.long 0x9FC++0x03 line.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO511 ,CPU Targets Byte Offset 511 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO510 ,CPU Targets Byte Offset 510 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO509 ,CPU Targets Byte Offset 509 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO508 ,CPU Targets Byte Offset 508 " else hgroup.long 0x9E0++0x03 hide.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hgroup.long 0x9E4++0x03 hide.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hgroup.long 0x9E8++0x03 hide.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hgroup.long 0x9EC++0x03 hide.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hgroup.long 0x9F0++0x03 hide.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hgroup.long 0x9F4++0x03 hide.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hgroup.long 0x9F8++0x03 hide.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hgroup.long 0x9FC++0x03 hide.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10) group.long 0xA00++0x03 line.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO515 ,CPU Targets Byte Offset 515 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO514 ,CPU Targets Byte Offset 514 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO513 ,CPU Targets Byte Offset 513 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO512 ,CPU Targets Byte Offset 512 " group.long 0xA04++0x03 line.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO519 ,CPU Targets Byte Offset 519 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO518 ,CPU Targets Byte Offset 518 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO517 ,CPU Targets Byte Offset 517 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO516 ,CPU Targets Byte Offset 516 " group.long 0xA08++0x03 line.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO523 ,CPU Targets Byte Offset 523 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO522 ,CPU Targets Byte Offset 522 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO521 ,CPU Targets Byte Offset 521 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO520 ,CPU Targets Byte Offset 520 " group.long 0xA0C++0x03 line.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO527 ,CPU Targets Byte Offset 527 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO526 ,CPU Targets Byte Offset 526 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO525 ,CPU Targets Byte Offset 525 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO524 ,CPU Targets Byte Offset 524 " group.long 0xA10++0x03 line.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO531 ,CPU Targets Byte Offset 531 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO530 ,CPU Targets Byte Offset 530 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO529 ,CPU Targets Byte Offset 529 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO528 ,CPU Targets Byte Offset 528 " group.long 0xA14++0x03 line.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO535 ,CPU Targets Byte Offset 535 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO534 ,CPU Targets Byte Offset 534 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO533 ,CPU Targets Byte Offset 533 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO532 ,CPU Targets Byte Offset 532 " group.long 0xA18++0x03 line.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO539 ,CPU Targets Byte Offset 539 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO538 ,CPU Targets Byte Offset 538 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO537 ,CPU Targets Byte Offset 537 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO536 ,CPU Targets Byte Offset 536 " group.long 0xA1C++0x03 line.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO543 ,CPU Targets Byte Offset 543 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO542 ,CPU Targets Byte Offset 542 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO541 ,CPU Targets Byte Offset 541 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO540 ,CPU Targets Byte Offset 540 " else hgroup.long 0xA00++0x03 hide.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hgroup.long 0xA04++0x03 hide.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hgroup.long 0xA08++0x03 hide.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hgroup.long 0xA0C++0x03 hide.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hgroup.long 0xA10++0x03 hide.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hgroup.long 0xA14++0x03 hide.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hgroup.long 0xA18++0x03 hide.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hgroup.long 0xA1C++0x03 hide.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11) group.long 0xA20++0x03 line.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO547 ,CPU Targets Byte Offset 547 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO546 ,CPU Targets Byte Offset 546 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO545 ,CPU Targets Byte Offset 545 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO544 ,CPU Targets Byte Offset 544 " group.long 0xA24++0x03 line.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO551 ,CPU Targets Byte Offset 551 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO550 ,CPU Targets Byte Offset 550 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO549 ,CPU Targets Byte Offset 549 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO548 ,CPU Targets Byte Offset 548 " group.long 0xA28++0x03 line.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO555 ,CPU Targets Byte Offset 555 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO554 ,CPU Targets Byte Offset 554 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO553 ,CPU Targets Byte Offset 553 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO552 ,CPU Targets Byte Offset 552 " group.long 0xA2C++0x03 line.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO559 ,CPU Targets Byte Offset 559 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO558 ,CPU Targets Byte Offset 558 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO557 ,CPU Targets Byte Offset 557 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO556 ,CPU Targets Byte Offset 556 " group.long 0xA30++0x03 line.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO563 ,CPU Targets Byte Offset 563 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO562 ,CPU Targets Byte Offset 562 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO561 ,CPU Targets Byte Offset 561 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO560 ,CPU Targets Byte Offset 560 " group.long 0xA34++0x03 line.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO567 ,CPU Targets Byte Offset 567 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO566 ,CPU Targets Byte Offset 566 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO565 ,CPU Targets Byte Offset 565 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO564 ,CPU Targets Byte Offset 564 " group.long 0xA38++0x03 line.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO571 ,CPU Targets Byte Offset 571 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO570 ,CPU Targets Byte Offset 570 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO569 ,CPU Targets Byte Offset 569 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO568 ,CPU Targets Byte Offset 568 " group.long 0xA3C++0x03 line.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO575 ,CPU Targets Byte Offset 575 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO574 ,CPU Targets Byte Offset 574 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO573 ,CPU Targets Byte Offset 573 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO572 ,CPU Targets Byte Offset 572 " else hgroup.long 0xA20++0x03 hide.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hgroup.long 0xA24++0x03 hide.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hgroup.long 0xA28++0x03 hide.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hgroup.long 0xA2C++0x03 hide.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hgroup.long 0xA30++0x03 hide.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hgroup.long 0xA34++0x03 hide.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hgroup.long 0xA38++0x03 hide.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hgroup.long 0xA3C++0x03 hide.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12) group.long 0xA40++0x03 line.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO579 ,CPU Targets Byte Offset 579 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO578 ,CPU Targets Byte Offset 578 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO577 ,CPU Targets Byte Offset 577 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO576 ,CPU Targets Byte Offset 576 " group.long 0xA44++0x03 line.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO583 ,CPU Targets Byte Offset 583 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO582 ,CPU Targets Byte Offset 582 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO581 ,CPU Targets Byte Offset 581 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO580 ,CPU Targets Byte Offset 580 " group.long 0xA48++0x03 line.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO587 ,CPU Targets Byte Offset 587 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO586 ,CPU Targets Byte Offset 586 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO585 ,CPU Targets Byte Offset 585 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO584 ,CPU Targets Byte Offset 584 " group.long 0xA4C++0x03 line.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO591 ,CPU Targets Byte Offset 591 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO590 ,CPU Targets Byte Offset 590 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO589 ,CPU Targets Byte Offset 589 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO588 ,CPU Targets Byte Offset 588 " group.long 0xA50++0x03 line.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO595 ,CPU Targets Byte Offset 595 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO594 ,CPU Targets Byte Offset 594 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO593 ,CPU Targets Byte Offset 593 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO592 ,CPU Targets Byte Offset 592 " group.long 0xA54++0x03 line.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO599 ,CPU Targets Byte Offset 599 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO598 ,CPU Targets Byte Offset 598 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO597 ,CPU Targets Byte Offset 597 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO596 ,CPU Targets Byte Offset 596 " group.long 0xA58++0x03 line.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO603 ,CPU Targets Byte Offset 603 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO602 ,CPU Targets Byte Offset 602 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO601 ,CPU Targets Byte Offset 601 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO600 ,CPU Targets Byte Offset 600 " group.long 0xA5C++0x03 line.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO607 ,CPU Targets Byte Offset 607 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO606 ,CPU Targets Byte Offset 606 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO605 ,CPU Targets Byte Offset 605 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO604 ,CPU Targets Byte Offset 604 " else hgroup.long 0xA40++0x03 hide.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hgroup.long 0xA44++0x03 hide.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hgroup.long 0xA48++0x03 hide.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hgroup.long 0xA4C++0x03 hide.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hgroup.long 0xA50++0x03 hide.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hgroup.long 0xA54++0x03 hide.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hgroup.long 0xA58++0x03 hide.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hgroup.long 0xA5C++0x03 hide.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13) group.long 0xA60++0x03 line.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO611 ,CPU Targets Byte Offset 611 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO610 ,CPU Targets Byte Offset 610 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO609 ,CPU Targets Byte Offset 609 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO608 ,CPU Targets Byte Offset 608 " group.long 0xA64++0x03 line.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO615 ,CPU Targets Byte Offset 615 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO614 ,CPU Targets Byte Offset 614 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO613 ,CPU Targets Byte Offset 613 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO612 ,CPU Targets Byte Offset 612 " group.long 0xA68++0x03 line.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO619 ,CPU Targets Byte Offset 619 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO618 ,CPU Targets Byte Offset 618 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO617 ,CPU Targets Byte Offset 617 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO616 ,CPU Targets Byte Offset 616 " group.long 0xA6C++0x03 line.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO623 ,CPU Targets Byte Offset 623 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO622 ,CPU Targets Byte Offset 622 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO621 ,CPU Targets Byte Offset 621 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO620 ,CPU Targets Byte Offset 620 " group.long 0xA70++0x03 line.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO627 ,CPU Targets Byte Offset 627 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO626 ,CPU Targets Byte Offset 626 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO625 ,CPU Targets Byte Offset 625 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO624 ,CPU Targets Byte Offset 624 " group.long 0xA74++0x03 line.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO631 ,CPU Targets Byte Offset 631 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO630 ,CPU Targets Byte Offset 630 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO629 ,CPU Targets Byte Offset 629 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO628 ,CPU Targets Byte Offset 628 " group.long 0xA78++0x03 line.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO635 ,CPU Targets Byte Offset 635 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO634 ,CPU Targets Byte Offset 634 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO633 ,CPU Targets Byte Offset 633 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO632 ,CPU Targets Byte Offset 632 " group.long 0xA7C++0x03 line.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO639 ,CPU Targets Byte Offset 639 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO638 ,CPU Targets Byte Offset 638 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO637 ,CPU Targets Byte Offset 637 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO636 ,CPU Targets Byte Offset 636 " else hgroup.long 0xA60++0x03 hide.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hgroup.long 0xA64++0x03 hide.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hgroup.long 0xA68++0x03 hide.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hgroup.long 0xA6C++0x03 hide.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hgroup.long 0xA70++0x03 hide.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hgroup.long 0xA74++0x03 hide.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hgroup.long 0xA78++0x03 hide.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hgroup.long 0xA7C++0x03 hide.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14) group.long 0xA80++0x03 line.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO643 ,CPU Targets Byte Offset 643 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO642 ,CPU Targets Byte Offset 642 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO641 ,CPU Targets Byte Offset 641 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO640 ,CPU Targets Byte Offset 640 " group.long 0xA84++0x03 line.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO647 ,CPU Targets Byte Offset 647 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO646 ,CPU Targets Byte Offset 646 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO645 ,CPU Targets Byte Offset 645 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO644 ,CPU Targets Byte Offset 644 " group.long 0xA88++0x03 line.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO651 ,CPU Targets Byte Offset 651 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO650 ,CPU Targets Byte Offset 650 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO649 ,CPU Targets Byte Offset 649 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO648 ,CPU Targets Byte Offset 648 " group.long 0xA8C++0x03 line.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO655 ,CPU Targets Byte Offset 655 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO654 ,CPU Targets Byte Offset 654 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO653 ,CPU Targets Byte Offset 653 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO652 ,CPU Targets Byte Offset 652 " group.long 0xA90++0x03 line.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO659 ,CPU Targets Byte Offset 659 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO658 ,CPU Targets Byte Offset 658 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO657 ,CPU Targets Byte Offset 657 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO656 ,CPU Targets Byte Offset 656 " group.long 0xA94++0x03 line.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO663 ,CPU Targets Byte Offset 663 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO662 ,CPU Targets Byte Offset 662 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO661 ,CPU Targets Byte Offset 661 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO660 ,CPU Targets Byte Offset 660 " group.long 0xA98++0x03 line.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO667 ,CPU Targets Byte Offset 667 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO666 ,CPU Targets Byte Offset 666 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO665 ,CPU Targets Byte Offset 665 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO664 ,CPU Targets Byte Offset 664 " group.long 0xA9C++0x03 line.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO671 ,CPU Targets Byte Offset 671 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO670 ,CPU Targets Byte Offset 670 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO669 ,CPU Targets Byte Offset 669 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO668 ,CPU Targets Byte Offset 668 " else hgroup.long 0xA80++0x03 hide.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hgroup.long 0xA84++0x03 hide.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hgroup.long 0xA88++0x03 hide.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hgroup.long 0xA8C++0x03 hide.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hgroup.long 0xA90++0x03 hide.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hgroup.long 0xA94++0x03 hide.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hgroup.long 0xA98++0x03 hide.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hgroup.long 0xA9C++0x03 hide.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15) group.long 0xAA0++0x03 line.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO675 ,CPU Targets Byte Offset 675 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO674 ,CPU Targets Byte Offset 674 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO673 ,CPU Targets Byte Offset 673 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO672 ,CPU Targets Byte Offset 672 " group.long 0xAA4++0x03 line.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO679 ,CPU Targets Byte Offset 679 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO678 ,CPU Targets Byte Offset 678 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO677 ,CPU Targets Byte Offset 677 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO676 ,CPU Targets Byte Offset 676 " group.long 0xAA8++0x03 line.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO683 ,CPU Targets Byte Offset 683 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO682 ,CPU Targets Byte Offset 682 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO681 ,CPU Targets Byte Offset 681 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO680 ,CPU Targets Byte Offset 680 " group.long 0xAAC++0x03 line.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO687 ,CPU Targets Byte Offset 687 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO686 ,CPU Targets Byte Offset 686 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO685 ,CPU Targets Byte Offset 685 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO684 ,CPU Targets Byte Offset 684 " group.long 0xAB0++0x03 line.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO691 ,CPU Targets Byte Offset 691 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO690 ,CPU Targets Byte Offset 690 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO689 ,CPU Targets Byte Offset 689 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO688 ,CPU Targets Byte Offset 688 " group.long 0xAB4++0x03 line.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO695 ,CPU Targets Byte Offset 695 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO694 ,CPU Targets Byte Offset 694 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO693 ,CPU Targets Byte Offset 693 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO692 ,CPU Targets Byte Offset 692 " group.long 0xAB8++0x03 line.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO699 ,CPU Targets Byte Offset 699 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO698 ,CPU Targets Byte Offset 698 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO697 ,CPU Targets Byte Offset 697 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO696 ,CPU Targets Byte Offset 696 " group.long 0xABC++0x03 line.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO703 ,CPU Targets Byte Offset 703 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO702 ,CPU Targets Byte Offset 702 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO701 ,CPU Targets Byte Offset 701 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO700 ,CPU Targets Byte Offset 700 " else hgroup.long 0xAA0++0x03 hide.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hgroup.long 0xAA4++0x03 hide.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hgroup.long 0xAA8++0x03 hide.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hgroup.long 0xAAC++0x03 hide.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hgroup.long 0xAB0++0x03 hide.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hgroup.long 0xAB4++0x03 hide.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hgroup.long 0xAB8++0x03 hide.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hgroup.long 0xABC++0x03 hide.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16) group.long 0xAC0++0x03 line.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO707 ,CPU Targets Byte Offset 707 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO706 ,CPU Targets Byte Offset 706 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO705 ,CPU Targets Byte Offset 705 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO704 ,CPU Targets Byte Offset 704 " group.long 0xAC4++0x03 line.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO711 ,CPU Targets Byte Offset 711 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO710 ,CPU Targets Byte Offset 710 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO709 ,CPU Targets Byte Offset 709 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO708 ,CPU Targets Byte Offset 708 " group.long 0xAC8++0x03 line.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO715 ,CPU Targets Byte Offset 715 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO714 ,CPU Targets Byte Offset 714 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO713 ,CPU Targets Byte Offset 713 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO712 ,CPU Targets Byte Offset 712 " group.long 0xACC++0x03 line.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO719 ,CPU Targets Byte Offset 719 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO718 ,CPU Targets Byte Offset 718 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO717 ,CPU Targets Byte Offset 717 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO716 ,CPU Targets Byte Offset 716 " group.long 0xAD0++0x03 line.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO723 ,CPU Targets Byte Offset 723 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO722 ,CPU Targets Byte Offset 722 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO721 ,CPU Targets Byte Offset 721 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO720 ,CPU Targets Byte Offset 720 " group.long 0xAD4++0x03 line.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO727 ,CPU Targets Byte Offset 727 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO726 ,CPU Targets Byte Offset 726 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO725 ,CPU Targets Byte Offset 725 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO724 ,CPU Targets Byte Offset 724 " group.long 0xAD8++0x03 line.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO731 ,CPU Targets Byte Offset 731 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO730 ,CPU Targets Byte Offset 730 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO729 ,CPU Targets Byte Offset 729 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO728 ,CPU Targets Byte Offset 728 " group.long 0xADC++0x03 line.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO735 ,CPU Targets Byte Offset 735 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO734 ,CPU Targets Byte Offset 734 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO733 ,CPU Targets Byte Offset 733 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO732 ,CPU Targets Byte Offset 732 " else hgroup.long 0xAC0++0x03 hide.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hgroup.long 0xAC4++0x03 hide.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hgroup.long 0xAC8++0x03 hide.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hgroup.long 0xACC++0x03 hide.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hgroup.long 0xAD0++0x03 hide.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hgroup.long 0xAD4++0x03 hide.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hgroup.long 0xAD8++0x03 hide.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hgroup.long 0xADC++0x03 hide.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17) group.long 0xAE0++0x03 line.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO739 ,CPU Targets Byte Offset 739 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO738 ,CPU Targets Byte Offset 738 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO737 ,CPU Targets Byte Offset 737 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO736 ,CPU Targets Byte Offset 736 " group.long 0xAE4++0x03 line.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO743 ,CPU Targets Byte Offset 743 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO742 ,CPU Targets Byte Offset 742 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO741 ,CPU Targets Byte Offset 741 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO740 ,CPU Targets Byte Offset 740 " group.long 0xAE8++0x03 line.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO747 ,CPU Targets Byte Offset 747 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO746 ,CPU Targets Byte Offset 746 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO745 ,CPU Targets Byte Offset 745 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO744 ,CPU Targets Byte Offset 744 " group.long 0xAEC++0x03 line.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO751 ,CPU Targets Byte Offset 751 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO750 ,CPU Targets Byte Offset 750 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO749 ,CPU Targets Byte Offset 749 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO748 ,CPU Targets Byte Offset 748 " group.long 0xAF0++0x03 line.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO755 ,CPU Targets Byte Offset 755 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO754 ,CPU Targets Byte Offset 754 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO753 ,CPU Targets Byte Offset 753 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO752 ,CPU Targets Byte Offset 752 " group.long 0xAF4++0x03 line.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO759 ,CPU Targets Byte Offset 759 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO758 ,CPU Targets Byte Offset 758 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO757 ,CPU Targets Byte Offset 757 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO756 ,CPU Targets Byte Offset 756 " group.long 0xAF8++0x03 line.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO763 ,CPU Targets Byte Offset 763 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO762 ,CPU Targets Byte Offset 762 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO761 ,CPU Targets Byte Offset 761 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO760 ,CPU Targets Byte Offset 760 " group.long 0xAFC++0x03 line.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO767 ,CPU Targets Byte Offset 767 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO766 ,CPU Targets Byte Offset 766 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO765 ,CPU Targets Byte Offset 765 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO764 ,CPU Targets Byte Offset 764 " else hgroup.long 0xAE0++0x03 hide.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hgroup.long 0xAE4++0x03 hide.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hgroup.long 0xAE8++0x03 hide.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hgroup.long 0xAEC++0x03 hide.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hgroup.long 0xAF0++0x03 hide.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hgroup.long 0xAF4++0x03 hide.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hgroup.long 0xAF8++0x03 hide.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hgroup.long 0xAFC++0x03 hide.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18) group.long 0xB00++0x03 line.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO771 ,CPU Targets Byte Offset 771 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO770 ,CPU Targets Byte Offset 770 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO769 ,CPU Targets Byte Offset 769 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO768 ,CPU Targets Byte Offset 768 " group.long 0xB04++0x03 line.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO775 ,CPU Targets Byte Offset 775 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO774 ,CPU Targets Byte Offset 774 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO773 ,CPU Targets Byte Offset 773 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO772 ,CPU Targets Byte Offset 772 " group.long 0xB08++0x03 line.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO779 ,CPU Targets Byte Offset 779 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO778 ,CPU Targets Byte Offset 778 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO777 ,CPU Targets Byte Offset 777 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO776 ,CPU Targets Byte Offset 776 " group.long 0xB0C++0x03 line.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO783 ,CPU Targets Byte Offset 783 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO782 ,CPU Targets Byte Offset 782 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO781 ,CPU Targets Byte Offset 781 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO780 ,CPU Targets Byte Offset 780 " group.long 0xB10++0x03 line.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO787 ,CPU Targets Byte Offset 787 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO786 ,CPU Targets Byte Offset 786 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO785 ,CPU Targets Byte Offset 785 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO784 ,CPU Targets Byte Offset 784 " group.long 0xB14++0x03 line.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO791 ,CPU Targets Byte Offset 791 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO790 ,CPU Targets Byte Offset 790 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO789 ,CPU Targets Byte Offset 789 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO788 ,CPU Targets Byte Offset 788 " group.long 0xB18++0x03 line.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO795 ,CPU Targets Byte Offset 795 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO794 ,CPU Targets Byte Offset 794 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO793 ,CPU Targets Byte Offset 793 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO792 ,CPU Targets Byte Offset 792 " group.long 0xB1C++0x03 line.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO799 ,CPU Targets Byte Offset 799 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO798 ,CPU Targets Byte Offset 798 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO797 ,CPU Targets Byte Offset 797 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO796 ,CPU Targets Byte Offset 796 " else hgroup.long 0xB00++0x03 hide.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hgroup.long 0xB04++0x03 hide.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hgroup.long 0xB08++0x03 hide.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hgroup.long 0xB0C++0x03 hide.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hgroup.long 0xB10++0x03 hide.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hgroup.long 0xB14++0x03 hide.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hgroup.long 0xB18++0x03 hide.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hgroup.long 0xB1C++0x03 hide.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19) group.long 0xB20++0x03 line.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO803 ,CPU Targets Byte Offset 803 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO802 ,CPU Targets Byte Offset 802 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO801 ,CPU Targets Byte Offset 801 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO800 ,CPU Targets Byte Offset 800 " group.long 0xB24++0x03 line.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO807 ,CPU Targets Byte Offset 807 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO806 ,CPU Targets Byte Offset 806 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO805 ,CPU Targets Byte Offset 805 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO804 ,CPU Targets Byte Offset 804 " group.long 0xB28++0x03 line.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO811 ,CPU Targets Byte Offset 811 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO810 ,CPU Targets Byte Offset 810 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO809 ,CPU Targets Byte Offset 809 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO808 ,CPU Targets Byte Offset 808 " group.long 0xB2C++0x03 line.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO815 ,CPU Targets Byte Offset 815 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO814 ,CPU Targets Byte Offset 814 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO813 ,CPU Targets Byte Offset 813 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO812 ,CPU Targets Byte Offset 812 " group.long 0xB30++0x03 line.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO819 ,CPU Targets Byte Offset 819 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO818 ,CPU Targets Byte Offset 818 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO817 ,CPU Targets Byte Offset 817 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO816 ,CPU Targets Byte Offset 816 " group.long 0xB34++0x03 line.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO823 ,CPU Targets Byte Offset 823 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO822 ,CPU Targets Byte Offset 822 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO821 ,CPU Targets Byte Offset 821 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO820 ,CPU Targets Byte Offset 820 " group.long 0xB38++0x03 line.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO827 ,CPU Targets Byte Offset 827 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO826 ,CPU Targets Byte Offset 826 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO825 ,CPU Targets Byte Offset 825 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO824 ,CPU Targets Byte Offset 824 " group.long 0xB3C++0x03 line.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO831 ,CPU Targets Byte Offset 831 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO830 ,CPU Targets Byte Offset 830 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO829 ,CPU Targets Byte Offset 829 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO828 ,CPU Targets Byte Offset 828 " else hgroup.long 0xB20++0x03 hide.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hgroup.long 0xB24++0x03 hide.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hgroup.long 0xB28++0x03 hide.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hgroup.long 0xB2C++0x03 hide.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hgroup.long 0xB30++0x03 hide.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hgroup.long 0xB34++0x03 hide.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hgroup.long 0xB38++0x03 hide.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hgroup.long 0xB3C++0x03 hide.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A) group.long 0xB40++0x03 line.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO835 ,CPU Targets Byte Offset 835 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO834 ,CPU Targets Byte Offset 834 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO833 ,CPU Targets Byte Offset 833 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO832 ,CPU Targets Byte Offset 832 " group.long 0xB44++0x03 line.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO839 ,CPU Targets Byte Offset 839 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO838 ,CPU Targets Byte Offset 838 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO837 ,CPU Targets Byte Offset 837 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO836 ,CPU Targets Byte Offset 836 " group.long 0xB48++0x03 line.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO843 ,CPU Targets Byte Offset 843 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO842 ,CPU Targets Byte Offset 842 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO841 ,CPU Targets Byte Offset 841 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO840 ,CPU Targets Byte Offset 840 " group.long 0xB4C++0x03 line.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO847 ,CPU Targets Byte Offset 847 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO846 ,CPU Targets Byte Offset 846 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO845 ,CPU Targets Byte Offset 845 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO844 ,CPU Targets Byte Offset 844 " group.long 0xB50++0x03 line.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO851 ,CPU Targets Byte Offset 851 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO850 ,CPU Targets Byte Offset 850 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO849 ,CPU Targets Byte Offset 849 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO848 ,CPU Targets Byte Offset 848 " group.long 0xB54++0x03 line.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO855 ,CPU Targets Byte Offset 855 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO854 ,CPU Targets Byte Offset 854 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO853 ,CPU Targets Byte Offset 853 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO852 ,CPU Targets Byte Offset 852 " group.long 0xB58++0x03 line.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO859 ,CPU Targets Byte Offset 859 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO858 ,CPU Targets Byte Offset 858 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO857 ,CPU Targets Byte Offset 857 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO856 ,CPU Targets Byte Offset 856 " group.long 0xB5C++0x03 line.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO863 ,CPU Targets Byte Offset 863 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO862 ,CPU Targets Byte Offset 862 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO861 ,CPU Targets Byte Offset 861 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO860 ,CPU Targets Byte Offset 860 " else hgroup.long 0xB40++0x03 hide.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hgroup.long 0xB44++0x03 hide.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hgroup.long 0xB48++0x03 hide.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hgroup.long 0xB4C++0x03 hide.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hgroup.long 0xB50++0x03 hide.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hgroup.long 0xB54++0x03 hide.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hgroup.long 0xB58++0x03 hide.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hgroup.long 0xB5C++0x03 hide.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B) group.long 0xB60++0x03 line.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO867 ,CPU Targets Byte Offset 867 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO866 ,CPU Targets Byte Offset 866 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO865 ,CPU Targets Byte Offset 865 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO864 ,CPU Targets Byte Offset 864 " group.long 0xB64++0x03 line.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO871 ,CPU Targets Byte Offset 871 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO870 ,CPU Targets Byte Offset 870 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO869 ,CPU Targets Byte Offset 869 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO868 ,CPU Targets Byte Offset 868 " group.long 0xB68++0x03 line.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO875 ,CPU Targets Byte Offset 875 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO874 ,CPU Targets Byte Offset 874 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO873 ,CPU Targets Byte Offset 873 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO872 ,CPU Targets Byte Offset 872 " group.long 0xB6C++0x03 line.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO879 ,CPU Targets Byte Offset 879 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO878 ,CPU Targets Byte Offset 878 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO877 ,CPU Targets Byte Offset 877 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO876 ,CPU Targets Byte Offset 876 " group.long 0xB70++0x03 line.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO883 ,CPU Targets Byte Offset 883 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO882 ,CPU Targets Byte Offset 882 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO881 ,CPU Targets Byte Offset 881 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO880 ,CPU Targets Byte Offset 880 " group.long 0xB74++0x03 line.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO887 ,CPU Targets Byte Offset 887 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO886 ,CPU Targets Byte Offset 886 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO885 ,CPU Targets Byte Offset 885 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO884 ,CPU Targets Byte Offset 884 " group.long 0xB78++0x03 line.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO891 ,CPU Targets Byte Offset 891 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO890 ,CPU Targets Byte Offset 890 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO889 ,CPU Targets Byte Offset 889 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO888 ,CPU Targets Byte Offset 888 " group.long 0xB7C++0x03 line.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO895 ,CPU Targets Byte Offset 895 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO894 ,CPU Targets Byte Offset 894 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO893 ,CPU Targets Byte Offset 893 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO892 ,CPU Targets Byte Offset 892 " else hgroup.long 0xB60++0x03 hide.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hgroup.long 0xB64++0x03 hide.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hgroup.long 0xB68++0x03 hide.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hgroup.long 0xB6C++0x03 hide.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hgroup.long 0xB70++0x03 hide.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hgroup.long 0xB74++0x03 hide.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hgroup.long 0xB78++0x03 hide.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hgroup.long 0xB7C++0x03 hide.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C) group.long 0xB80++0x03 line.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO899 ,CPU Targets Byte Offset 899 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO898 ,CPU Targets Byte Offset 898 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO897 ,CPU Targets Byte Offset 897 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO896 ,CPU Targets Byte Offset 896 " group.long 0xB84++0x03 line.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO903 ,CPU Targets Byte Offset 903 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO902 ,CPU Targets Byte Offset 902 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO901 ,CPU Targets Byte Offset 901 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO900 ,CPU Targets Byte Offset 900 " group.long 0xB88++0x03 line.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO907 ,CPU Targets Byte Offset 907 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO906 ,CPU Targets Byte Offset 906 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO905 ,CPU Targets Byte Offset 905 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO904 ,CPU Targets Byte Offset 904 " group.long 0xB8C++0x03 line.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO911 ,CPU Targets Byte Offset 911 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO910 ,CPU Targets Byte Offset 910 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO909 ,CPU Targets Byte Offset 909 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO908 ,CPU Targets Byte Offset 908 " group.long 0xB90++0x03 line.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO915 ,CPU Targets Byte Offset 915 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO914 ,CPU Targets Byte Offset 914 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO913 ,CPU Targets Byte Offset 913 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO912 ,CPU Targets Byte Offset 912 " group.long 0xB94++0x03 line.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO919 ,CPU Targets Byte Offset 919 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO918 ,CPU Targets Byte Offset 918 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO917 ,CPU Targets Byte Offset 917 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO916 ,CPU Targets Byte Offset 916 " group.long 0xB98++0x03 line.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO923 ,CPU Targets Byte Offset 923 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO922 ,CPU Targets Byte Offset 922 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO921 ,CPU Targets Byte Offset 921 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO920 ,CPU Targets Byte Offset 920 " group.long 0xB9C++0x03 line.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO927 ,CPU Targets Byte Offset 927 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO926 ,CPU Targets Byte Offset 926 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO925 ,CPU Targets Byte Offset 925 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO924 ,CPU Targets Byte Offset 924 " else hgroup.long 0xB80++0x03 hide.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hgroup.long 0xB84++0x03 hide.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hgroup.long 0xB88++0x03 hide.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hgroup.long 0xB8C++0x03 hide.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hgroup.long 0xB90++0x03 hide.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hgroup.long 0xB94++0x03 hide.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hgroup.long 0xB98++0x03 hide.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hgroup.long 0xB9C++0x03 hide.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D) group.long 0xBA0++0x03 line.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO931 ,CPU Targets Byte Offset 931 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO930 ,CPU Targets Byte Offset 930 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO929 ,CPU Targets Byte Offset 929 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO928 ,CPU Targets Byte Offset 928 " group.long 0xBA4++0x03 line.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO935 ,CPU Targets Byte Offset 935 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO934 ,CPU Targets Byte Offset 934 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO933 ,CPU Targets Byte Offset 933 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO932 ,CPU Targets Byte Offset 932 " group.long 0xBA8++0x03 line.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO939 ,CPU Targets Byte Offset 939 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO938 ,CPU Targets Byte Offset 938 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO937 ,CPU Targets Byte Offset 937 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO936 ,CPU Targets Byte Offset 936 " group.long 0xBAC++0x03 line.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO943 ,CPU Targets Byte Offset 943 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO942 ,CPU Targets Byte Offset 942 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO941 ,CPU Targets Byte Offset 941 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO940 ,CPU Targets Byte Offset 940 " group.long 0xBB0++0x03 line.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO947 ,CPU Targets Byte Offset 947 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO946 ,CPU Targets Byte Offset 946 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO945 ,CPU Targets Byte Offset 945 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO944 ,CPU Targets Byte Offset 944 " group.long 0xBB4++0x03 line.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO951 ,CPU Targets Byte Offset 951 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO950 ,CPU Targets Byte Offset 950 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO949 ,CPU Targets Byte Offset 949 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO948 ,CPU Targets Byte Offset 948 " group.long 0xBB8++0x03 line.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO955 ,CPU Targets Byte Offset 955 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO954 ,CPU Targets Byte Offset 954 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO953 ,CPU Targets Byte Offset 953 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO952 ,CPU Targets Byte Offset 952 " group.long 0xBBC++0x03 line.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO959 ,CPU Targets Byte Offset 959 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO958 ,CPU Targets Byte Offset 958 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO957 ,CPU Targets Byte Offset 957 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO956 ,CPU Targets Byte Offset 956 " else hgroup.long 0xBA0++0x03 hide.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hgroup.long 0xBA4++0x03 hide.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hgroup.long 0xBA8++0x03 hide.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hgroup.long 0xBAC++0x03 hide.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hgroup.long 0xBB0++0x03 hide.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hgroup.long 0xBB4++0x03 hide.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hgroup.long 0xBB8++0x03 hide.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hgroup.long 0xBBC++0x03 hide.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E) group.long 0xBC0++0x03 line.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO963 ,CPU Targets Byte Offset 963 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO962 ,CPU Targets Byte Offset 962 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO961 ,CPU Targets Byte Offset 961 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO960 ,CPU Targets Byte Offset 960 " group.long 0xBC4++0x03 line.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO967 ,CPU Targets Byte Offset 967 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO966 ,CPU Targets Byte Offset 966 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO965 ,CPU Targets Byte Offset 965 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO964 ,CPU Targets Byte Offset 964 " group.long 0xBC8++0x03 line.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO971 ,CPU Targets Byte Offset 971 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO970 ,CPU Targets Byte Offset 970 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO969 ,CPU Targets Byte Offset 969 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO968 ,CPU Targets Byte Offset 968 " group.long 0xBCC++0x03 line.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO975 ,CPU Targets Byte Offset 975 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO974 ,CPU Targets Byte Offset 974 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO973 ,CPU Targets Byte Offset 973 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO972 ,CPU Targets Byte Offset 972 " group.long 0xBD0++0x03 line.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO979 ,CPU Targets Byte Offset 979 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO978 ,CPU Targets Byte Offset 978 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO977 ,CPU Targets Byte Offset 977 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO976 ,CPU Targets Byte Offset 976 " group.long 0xBD4++0x03 line.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO983 ,CPU Targets Byte Offset 983 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO982 ,CPU Targets Byte Offset 982 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO981 ,CPU Targets Byte Offset 981 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO980 ,CPU Targets Byte Offset 980 " group.long 0xBD8++0x03 line.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO987 ,CPU Targets Byte Offset 987 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO986 ,CPU Targets Byte Offset 986 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO985 ,CPU Targets Byte Offset 985 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO984 ,CPU Targets Byte Offset 984 " group.long 0xBDC++0x03 line.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO991 ,CPU Targets Byte Offset 991 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO990 ,CPU Targets Byte Offset 990 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO989 ,CPU Targets Byte Offset 989 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO988 ,CPU Targets Byte Offset 988 " else hgroup.long 0xBC0++0x03 hide.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hgroup.long 0xBC4++0x03 hide.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hgroup.long 0xBC8++0x03 hide.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hgroup.long 0xBCC++0x03 hide.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hgroup.long 0xBD0++0x03 hide.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hgroup.long 0xBD4++0x03 hide.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hgroup.long 0xBD8++0x03 hide.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hgroup.long 0xBDC++0x03 hide.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1F) group.long 0xBE0++0x03 line.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO995 ,CPU Targets Byte Offset 995 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO994 ,CPU Targets Byte Offset 994 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO993 ,CPU Targets Byte Offset 993 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO992 ,CPU Targets Byte Offset 992 " group.long 0xBE4++0x03 line.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO999 ,CPU Targets Byte Offset 999 " hexmask.long.byte 0x00 16.--23. 1. " CPUTBO998 ,CPU Targets Byte Offset 998 " hexmask.long.byte 0x00 8.--15. 1. " CPUTBO997 ,CPU Targets Byte Offset 997 " hexmask.long.byte 0x00 0.--7. 1. " CPUTBO996 ,CPU Targets Byte Offset 996 " group.long 0xBE8++0x03 line.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1003 ,CPU Targets Byte Offset 1003" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1002 ,CPU Targets Byte Offset 1002" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1001 ,CPU Targets Byte Offset 1001" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1000 ,CPU Targets Byte Offset 1000" group.long 0xBEC++0x03 line.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1007 ,CPU Targets Byte Offset 1007" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1006 ,CPU Targets Byte Offset 1006" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1005 ,CPU Targets Byte Offset 1005" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1004 ,CPU Targets Byte Offset 1004" group.long 0xBF0++0x03 line.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1011 ,CPU Targets Byte Offset 1011" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1010 ,CPU Targets Byte Offset 1010" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1009 ,CPU Targets Byte Offset 1009" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1008 ,CPU Targets Byte Offset 1008" group.long 0xBF4++0x03 line.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1015 ,CPU Targets Byte Offset 1015" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1014 ,CPU Targets Byte Offset 1014" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1013 ,CPU Targets Byte Offset 1013" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1012 ,CPU Targets Byte Offset 1012" group.long 0xBF8++0x03 line.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" hexmask.long.byte 0x00 24.--31. 1. " CPUTBO1019 ,CPU Targets Byte Offset 1019" hexmask.long.byte 0x00 16.--23. 1. " CPUTBO1018 ,CPU Targets Byte Offset 1018" hexmask.long.byte 0x00 8.--15. 1. " CPUTBO1017 ,CPU Targets Byte Offset 1017" hexmask.long.byte 0x00 0.--7. 1. " CPUTBO1016 ,CPU Targets Byte Offset 1016" else hgroup.long 0xBE0++0x03 hide.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" hgroup.long 0xBE4++0x03 hide.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" hgroup.long 0xBE8++0x03 hide.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" hgroup.long 0xBEC++0x03 hide.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" hgroup.long 0xBF0++0x03 hide.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" hgroup.long 0xBF4++0x03 hide.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" hgroup.long 0xBF8++0x03 hide.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" endif else hgroup.long 0x800++0x03 hide.long 0x00 "GICD_ITARGETSR0 ,Interrupt Processor Targets Register 0 " hgroup.long 0x804++0x03 hide.long 0x00 "GICD_ITARGETSR1 ,Interrupt Processor Targets Register 1 " hgroup.long 0x808++0x03 hide.long 0x00 "GICD_ITARGETSR2 ,Interrupt Processor Targets Register 2 " hgroup.long 0x80C++0x03 hide.long 0x00 "GICD_ITARGETSR3 ,Interrupt Processor Targets Register 3 " hgroup.long 0x810++0x03 hide.long 0x00 "GICD_ITARGETSR4 ,Interrupt Processor Targets Register 4 " hgroup.long 0x814++0x03 hide.long 0x00 "GICD_ITARGETSR5 ,Interrupt Processor Targets Register 5 " hgroup.long 0x818++0x03 hide.long 0x00 "GICD_ITARGETSR6 ,Interrupt Processor Targets Register 6 " hgroup.long 0x81C++0x03 hide.long 0x00 "GICD_ITARGETSR7 ,Interrupt Processor Targets Register 7 " hgroup.long 0x820++0x03 hide.long 0x00 "GICD_ITARGETSR8 ,Interrupt Processor Targets Register 8 " hgroup.long 0x824++0x03 hide.long 0x00 "GICD_ITARGETSR9 ,Interrupt Processor Targets Register 9 " hgroup.long 0x828++0x03 hide.long 0x00 "GICD_ITARGETSR10 ,Interrupt Processor Targets Register 10 " hgroup.long 0x82C++0x03 hide.long 0x00 "GICD_ITARGETSR11 ,Interrupt Processor Targets Register 11 " hgroup.long 0x830++0x03 hide.long 0x00 "GICD_ITARGETSR12 ,Interrupt Processor Targets Register 12 " hgroup.long 0x834++0x03 hide.long 0x00 "GICD_ITARGETSR13 ,Interrupt Processor Targets Register 13 " hgroup.long 0x838++0x03 hide.long 0x00 "GICD_ITARGETSR14 ,Interrupt Processor Targets Register 14 " hgroup.long 0x83C++0x03 hide.long 0x00 "GICD_ITARGETSR15 ,Interrupt Processor Targets Register 15 " hgroup.long 0x840++0x03 hide.long 0x00 "GICD_ITARGETSR16 ,Interrupt Processor Targets Register 16 " hgroup.long 0x844++0x03 hide.long 0x00 "GICD_ITARGETSR17 ,Interrupt Processor Targets Register 17 " hgroup.long 0x848++0x03 hide.long 0x00 "GICD_ITARGETSR18 ,Interrupt Processor Targets Register 18 " hgroup.long 0x84C++0x03 hide.long 0x00 "GICD_ITARGETSR19 ,Interrupt Processor Targets Register 19 " hgroup.long 0x850++0x03 hide.long 0x00 "GICD_ITARGETSR20 ,Interrupt Processor Targets Register 20 " hgroup.long 0x854++0x03 hide.long 0x00 "GICD_ITARGETSR21 ,Interrupt Processor Targets Register 21 " hgroup.long 0x858++0x03 hide.long 0x00 "GICD_ITARGETSR22 ,Interrupt Processor Targets Register 22 " hgroup.long 0x85C++0x03 hide.long 0x00 "GICD_ITARGETSR23 ,Interrupt Processor Targets Register 23 " hgroup.long 0x860++0x03 hide.long 0x00 "GICD_ITARGETSR24 ,Interrupt Processor Targets Register 24 " hgroup.long 0x864++0x03 hide.long 0x00 "GICD_ITARGETSR25 ,Interrupt Processor Targets Register 25 " hgroup.long 0x868++0x03 hide.long 0x00 "GICD_ITARGETSR26 ,Interrupt Processor Targets Register 26 " hgroup.long 0x86C++0x03 hide.long 0x00 "GICD_ITARGETSR27 ,Interrupt Processor Targets Register 27 " hgroup.long 0x870++0x03 hide.long 0x00 "GICD_ITARGETSR28 ,Interrupt Processor Targets Register 28 " hgroup.long 0x874++0x03 hide.long 0x00 "GICD_ITARGETSR29 ,Interrupt Processor Targets Register 29 " hgroup.long 0x878++0x03 hide.long 0x00 "GICD_ITARGETSR30 ,Interrupt Processor Targets Register 30 " hgroup.long 0x87C++0x03 hide.long 0x00 "GICD_ITARGETSR31 ,Interrupt Processor Targets Register 31 " hgroup.long 0x880++0x03 hide.long 0x00 "GICD_ITARGETSR32 ,Interrupt Processor Targets Register 32 " hgroup.long 0x884++0x03 hide.long 0x00 "GICD_ITARGETSR33 ,Interrupt Processor Targets Register 33 " hgroup.long 0x888++0x03 hide.long 0x00 "GICD_ITARGETSR34 ,Interrupt Processor Targets Register 34 " hgroup.long 0x88C++0x03 hide.long 0x00 "GICD_ITARGETSR35 ,Interrupt Processor Targets Register 35 " hgroup.long 0x890++0x03 hide.long 0x00 "GICD_ITARGETSR36 ,Interrupt Processor Targets Register 36 " hgroup.long 0x894++0x03 hide.long 0x00 "GICD_ITARGETSR37 ,Interrupt Processor Targets Register 37 " hgroup.long 0x898++0x03 hide.long 0x00 "GICD_ITARGETSR38 ,Interrupt Processor Targets Register 38 " hgroup.long 0x89C++0x03 hide.long 0x00 "GICD_ITARGETSR39 ,Interrupt Processor Targets Register 39 " hgroup.long 0x8A0++0x03 hide.long 0x00 "GICD_ITARGETSR40 ,Interrupt Processor Targets Register 40 " hgroup.long 0x8A4++0x03 hide.long 0x00 "GICD_ITARGETSR41 ,Interrupt Processor Targets Register 41 " hgroup.long 0x8A8++0x03 hide.long 0x00 "GICD_ITARGETSR42 ,Interrupt Processor Targets Register 42 " hgroup.long 0x8AC++0x03 hide.long 0x00 "GICD_ITARGETSR43 ,Interrupt Processor Targets Register 43 " hgroup.long 0x8B0++0x03 hide.long 0x00 "GICD_ITARGETSR44 ,Interrupt Processor Targets Register 44 " hgroup.long 0x8B4++0x03 hide.long 0x00 "GICD_ITARGETSR45 ,Interrupt Processor Targets Register 45 " hgroup.long 0x8B8++0x03 hide.long 0x00 "GICD_ITARGETSR46 ,Interrupt Processor Targets Register 46 " hgroup.long 0x8BC++0x03 hide.long 0x00 "GICD_ITARGETSR47 ,Interrupt Processor Targets Register 47 " hgroup.long 0x8C0++0x03 hide.long 0x00 "GICD_ITARGETSR48 ,Interrupt Processor Targets Register 48 " hgroup.long 0x8C4++0x03 hide.long 0x00 "GICD_ITARGETSR49 ,Interrupt Processor Targets Register 49 " hgroup.long 0x8C8++0x03 hide.long 0x00 "GICD_ITARGETSR50 ,Interrupt Processor Targets Register 50 " hgroup.long 0x8CC++0x03 hide.long 0x00 "GICD_ITARGETSR51 ,Interrupt Processor Targets Register 51 " hgroup.long 0x8D0++0x03 hide.long 0x00 "GICD_ITARGETSR52 ,Interrupt Processor Targets Register 52 " hgroup.long 0x8D4++0x03 hide.long 0x00 "GICD_ITARGETSR53 ,Interrupt Processor Targets Register 53 " hgroup.long 0x8D8++0x03 hide.long 0x00 "GICD_ITARGETSR54 ,Interrupt Processor Targets Register 54 " hgroup.long 0x8DC++0x03 hide.long 0x00 "GICD_ITARGETSR55 ,Interrupt Processor Targets Register 55 " hgroup.long 0x8E0++0x03 hide.long 0x00 "GICD_ITARGETSR56 ,Interrupt Processor Targets Register 56 " hgroup.long 0x8E4++0x03 hide.long 0x00 "GICD_ITARGETSR57 ,Interrupt Processor Targets Register 57 " hgroup.long 0x8E8++0x03 hide.long 0x00 "GICD_ITARGETSR58 ,Interrupt Processor Targets Register 58 " hgroup.long 0x8EC++0x03 hide.long 0x00 "GICD_ITARGETSR59 ,Interrupt Processor Targets Register 59 " hgroup.long 0x8F0++0x03 hide.long 0x00 "GICD_ITARGETSR60 ,Interrupt Processor Targets Register 60 " hgroup.long 0x8F4++0x03 hide.long 0x00 "GICD_ITARGETSR61 ,Interrupt Processor Targets Register 61 " hgroup.long 0x8F8++0x03 hide.long 0x00 "GICD_ITARGETSR62 ,Interrupt Processor Targets Register 62 " hgroup.long 0x8FC++0x03 hide.long 0x00 "GICD_ITARGETSR63 ,Interrupt Processor Targets Register 63 " hgroup.long 0x900++0x03 hide.long 0x00 "GICD_ITARGETSR64 ,Interrupt Processor Targets Register 64 " hgroup.long 0x904++0x03 hide.long 0x00 "GICD_ITARGETSR65 ,Interrupt Processor Targets Register 65 " hgroup.long 0x908++0x03 hide.long 0x00 "GICD_ITARGETSR66 ,Interrupt Processor Targets Register 66 " hgroup.long 0x90C++0x03 hide.long 0x00 "GICD_ITARGETSR67 ,Interrupt Processor Targets Register 67 " hgroup.long 0x910++0x03 hide.long 0x00 "GICD_ITARGETSR68 ,Interrupt Processor Targets Register 68 " hgroup.long 0x914++0x03 hide.long 0x00 "GICD_ITARGETSR69 ,Interrupt Processor Targets Register 69 " hgroup.long 0x918++0x03 hide.long 0x00 "GICD_ITARGETSR70 ,Interrupt Processor Targets Register 70 " hgroup.long 0x91C++0x03 hide.long 0x00 "GICD_ITARGETSR71 ,Interrupt Processor Targets Register 71 " hgroup.long 0x920++0x03 hide.long 0x00 "GICD_ITARGETSR72 ,Interrupt Processor Targets Register 72 " hgroup.long 0x924++0x03 hide.long 0x00 "GICD_ITARGETSR73 ,Interrupt Processor Targets Register 73 " hgroup.long 0x928++0x03 hide.long 0x00 "GICD_ITARGETSR74 ,Interrupt Processor Targets Register 74 " hgroup.long 0x92C++0x03 hide.long 0x00 "GICD_ITARGETSR75 ,Interrupt Processor Targets Register 75 " hgroup.long 0x930++0x03 hide.long 0x00 "GICD_ITARGETSR76 ,Interrupt Processor Targets Register 76 " hgroup.long 0x934++0x03 hide.long 0x00 "GICD_ITARGETSR77 ,Interrupt Processor Targets Register 77 " hgroup.long 0x938++0x03 hide.long 0x00 "GICD_ITARGETSR78 ,Interrupt Processor Targets Register 78 " hgroup.long 0x93C++0x03 hide.long 0x00 "GICD_ITARGETSR79 ,Interrupt Processor Targets Register 79 " hgroup.long 0x940++0x03 hide.long 0x00 "GICD_ITARGETSR80 ,Interrupt Processor Targets Register 80 " hgroup.long 0x944++0x03 hide.long 0x00 "GICD_ITARGETSR81 ,Interrupt Processor Targets Register 81 " hgroup.long 0x948++0x03 hide.long 0x00 "GICD_ITARGETSR82 ,Interrupt Processor Targets Register 82 " hgroup.long 0x94C++0x03 hide.long 0x00 "GICD_ITARGETSR83 ,Interrupt Processor Targets Register 83 " hgroup.long 0x950++0x03 hide.long 0x00 "GICD_ITARGETSR84 ,Interrupt Processor Targets Register 84 " hgroup.long 0x954++0x03 hide.long 0x00 "GICD_ITARGETSR85 ,Interrupt Processor Targets Register 85 " hgroup.long 0x958++0x03 hide.long 0x00 "GICD_ITARGETSR86 ,Interrupt Processor Targets Register 86 " hgroup.long 0x95C++0x03 hide.long 0x00 "GICD_ITARGETSR87 ,Interrupt Processor Targets Register 87 " hgroup.long 0x960++0x03 hide.long 0x00 "GICD_ITARGETSR88 ,Interrupt Processor Targets Register 88 " hgroup.long 0x964++0x03 hide.long 0x00 "GICD_ITARGETSR89 ,Interrupt Processor Targets Register 89 " hgroup.long 0x968++0x03 hide.long 0x00 "GICD_ITARGETSR90 ,Interrupt Processor Targets Register 90 " hgroup.long 0x96C++0x03 hide.long 0x00 "GICD_ITARGETSR91 ,Interrupt Processor Targets Register 91 " hgroup.long 0x970++0x03 hide.long 0x00 "GICD_ITARGETSR92 ,Interrupt Processor Targets Register 92 " hgroup.long 0x974++0x03 hide.long 0x00 "GICD_ITARGETSR93 ,Interrupt Processor Targets Register 93 " hgroup.long 0x978++0x03 hide.long 0x00 "GICD_ITARGETSR94 ,Interrupt Processor Targets Register 94 " hgroup.long 0x97C++0x03 hide.long 0x00 "GICD_ITARGETSR95 ,Interrupt Processor Targets Register 95 " hgroup.long 0x980++0x03 hide.long 0x00 "GICD_ITARGETSR96 ,Interrupt Processor Targets Register 96 " hgroup.long 0x984++0x03 hide.long 0x00 "GICD_ITARGETSR97 ,Interrupt Processor Targets Register 97 " hgroup.long 0x988++0x03 hide.long 0x00 "GICD_ITARGETSR98 ,Interrupt Processor Targets Register 98 " hgroup.long 0x98C++0x03 hide.long 0x00 "GICD_ITARGETSR99 ,Interrupt Processor Targets Register 99 " hgroup.long 0x990++0x03 hide.long 0x00 "GICD_ITARGETSR100,Interrupt Processor Targets Register 100" hgroup.long 0x994++0x03 hide.long 0x00 "GICD_ITARGETSR101,Interrupt Processor Targets Register 101" hgroup.long 0x998++0x03 hide.long 0x00 "GICD_ITARGETSR102,Interrupt Processor Targets Register 102" hgroup.long 0x99C++0x03 hide.long 0x00 "GICD_ITARGETSR103,Interrupt Processor Targets Register 103" hgroup.long 0x9A0++0x03 hide.long 0x00 "GICD_ITARGETSR104,Interrupt Processor Targets Register 104" hgroup.long 0x9A4++0x03 hide.long 0x00 "GICD_ITARGETSR105,Interrupt Processor Targets Register 105" hgroup.long 0x9A8++0x03 hide.long 0x00 "GICD_ITARGETSR106,Interrupt Processor Targets Register 106" hgroup.long 0x9AC++0x03 hide.long 0x00 "GICD_ITARGETSR107,Interrupt Processor Targets Register 107" hgroup.long 0x9B0++0x03 hide.long 0x00 "GICD_ITARGETSR108,Interrupt Processor Targets Register 108" hgroup.long 0x9B4++0x03 hide.long 0x00 "GICD_ITARGETSR109,Interrupt Processor Targets Register 109" hgroup.long 0x9B8++0x03 hide.long 0x00 "GICD_ITARGETSR110,Interrupt Processor Targets Register 110" hgroup.long 0x9BC++0x03 hide.long 0x00 "GICD_ITARGETSR111,Interrupt Processor Targets Register 111" hgroup.long 0x9C0++0x03 hide.long 0x00 "GICD_ITARGETSR112,Interrupt Processor Targets Register 112" hgroup.long 0x9C4++0x03 hide.long 0x00 "GICD_ITARGETSR113,Interrupt Processor Targets Register 113" hgroup.long 0x9C8++0x03 hide.long 0x00 "GICD_ITARGETSR114,Interrupt Processor Targets Register 114" hgroup.long 0x9CC++0x03 hide.long 0x00 "GICD_ITARGETSR115,Interrupt Processor Targets Register 115" hgroup.long 0x9D0++0x03 hide.long 0x00 "GICD_ITARGETSR116,Interrupt Processor Targets Register 116" hgroup.long 0x9D4++0x03 hide.long 0x00 "GICD_ITARGETSR117,Interrupt Processor Targets Register 117" hgroup.long 0x9D8++0x03 hide.long 0x00 "GICD_ITARGETSR118,Interrupt Processor Targets Register 118" hgroup.long 0x9DC++0x03 hide.long 0x00 "GICD_ITARGETSR119,Interrupt Processor Targets Register 119" hgroup.long 0x9E0++0x03 hide.long 0x00 "GICD_ITARGETSR120,Interrupt Processor Targets Register 120" hgroup.long 0x9E4++0x03 hide.long 0x00 "GICD_ITARGETSR121,Interrupt Processor Targets Register 121" hgroup.long 0x9E8++0x03 hide.long 0x00 "GICD_ITARGETSR122,Interrupt Processor Targets Register 122" hgroup.long 0x9EC++0x03 hide.long 0x00 "GICD_ITARGETSR123,Interrupt Processor Targets Register 123" hgroup.long 0x9F0++0x03 hide.long 0x00 "GICD_ITARGETSR124,Interrupt Processor Targets Register 124" hgroup.long 0x9F4++0x03 hide.long 0x00 "GICD_ITARGETSR125,Interrupt Processor Targets Register 125" hgroup.long 0x9F8++0x03 hide.long 0x00 "GICD_ITARGETSR126,Interrupt Processor Targets Register 126" hgroup.long 0x9FC++0x03 hide.long 0x00 "GICD_ITARGETSR127,Interrupt Processor Targets Register 127" hgroup.long 0xA00++0x03 hide.long 0x00 "GICD_ITARGETSR128,Interrupt Processor Targets Register 128" hgroup.long 0xA04++0x03 hide.long 0x00 "GICD_ITARGETSR129,Interrupt Processor Targets Register 129" hgroup.long 0xA08++0x03 hide.long 0x00 "GICD_ITARGETSR130,Interrupt Processor Targets Register 130" hgroup.long 0xA0C++0x03 hide.long 0x00 "GICD_ITARGETSR131,Interrupt Processor Targets Register 131" hgroup.long 0xA10++0x03 hide.long 0x00 "GICD_ITARGETSR132,Interrupt Processor Targets Register 132" hgroup.long 0xA14++0x03 hide.long 0x00 "GICD_ITARGETSR133,Interrupt Processor Targets Register 133" hgroup.long 0xA18++0x03 hide.long 0x00 "GICD_ITARGETSR134,Interrupt Processor Targets Register 134" hgroup.long 0xA1C++0x03 hide.long 0x00 "GICD_ITARGETSR135,Interrupt Processor Targets Register 135" hgroup.long 0xA20++0x03 hide.long 0x00 "GICD_ITARGETSR136,Interrupt Processor Targets Register 136" hgroup.long 0xA24++0x03 hide.long 0x00 "GICD_ITARGETSR137,Interrupt Processor Targets Register 137" hgroup.long 0xA28++0x03 hide.long 0x00 "GICD_ITARGETSR138,Interrupt Processor Targets Register 138" hgroup.long 0xA2C++0x03 hide.long 0x00 "GICD_ITARGETSR139,Interrupt Processor Targets Register 139" hgroup.long 0xA30++0x03 hide.long 0x00 "GICD_ITARGETSR140,Interrupt Processor Targets Register 140" hgroup.long 0xA34++0x03 hide.long 0x00 "GICD_ITARGETSR141,Interrupt Processor Targets Register 141" hgroup.long 0xA38++0x03 hide.long 0x00 "GICD_ITARGETSR142,Interrupt Processor Targets Register 142" hgroup.long 0xA3C++0x03 hide.long 0x00 "GICD_ITARGETSR143,Interrupt Processor Targets Register 143" hgroup.long 0xA40++0x03 hide.long 0x00 "GICD_ITARGETSR144,Interrupt Processor Targets Register 144" hgroup.long 0xA44++0x03 hide.long 0x00 "GICD_ITARGETSR145,Interrupt Processor Targets Register 145" hgroup.long 0xA48++0x03 hide.long 0x00 "GICD_ITARGETSR146,Interrupt Processor Targets Register 146" hgroup.long 0xA4C++0x03 hide.long 0x00 "GICD_ITARGETSR147,Interrupt Processor Targets Register 147" hgroup.long 0xA50++0x03 hide.long 0x00 "GICD_ITARGETSR148,Interrupt Processor Targets Register 148" hgroup.long 0xA54++0x03 hide.long 0x00 "GICD_ITARGETSR149,Interrupt Processor Targets Register 149" hgroup.long 0xA58++0x03 hide.long 0x00 "GICD_ITARGETSR150,Interrupt Processor Targets Register 150" hgroup.long 0xA5C++0x03 hide.long 0x00 "GICD_ITARGETSR151,Interrupt Processor Targets Register 151" hgroup.long 0xA60++0x03 hide.long 0x00 "GICD_ITARGETSR152,Interrupt Processor Targets Register 152" hgroup.long 0xA64++0x03 hide.long 0x00 "GICD_ITARGETSR153,Interrupt Processor Targets Register 153" hgroup.long 0xA68++0x03 hide.long 0x00 "GICD_ITARGETSR154,Interrupt Processor Targets Register 154" hgroup.long 0xA6C++0x03 hide.long 0x00 "GICD_ITARGETSR155,Interrupt Processor Targets Register 155" hgroup.long 0xA70++0x03 hide.long 0x00 "GICD_ITARGETSR156,Interrupt Processor Targets Register 156" hgroup.long 0xA74++0x03 hide.long 0x00 "GICD_ITARGETSR157,Interrupt Processor Targets Register 157" hgroup.long 0xA78++0x03 hide.long 0x00 "GICD_ITARGETSR158,Interrupt Processor Targets Register 158" hgroup.long 0xA7C++0x03 hide.long 0x00 "GICD_ITARGETSR159,Interrupt Processor Targets Register 159" hgroup.long 0xA80++0x03 hide.long 0x00 "GICD_ITARGETSR160,Interrupt Processor Targets Register 160" hgroup.long 0xA84++0x03 hide.long 0x00 "GICD_ITARGETSR161,Interrupt Processor Targets Register 161" hgroup.long 0xA88++0x03 hide.long 0x00 "GICD_ITARGETSR162,Interrupt Processor Targets Register 162" hgroup.long 0xA8C++0x03 hide.long 0x00 "GICD_ITARGETSR163,Interrupt Processor Targets Register 163" hgroup.long 0xA90++0x03 hide.long 0x00 "GICD_ITARGETSR164,Interrupt Processor Targets Register 164" hgroup.long 0xA94++0x03 hide.long 0x00 "GICD_ITARGETSR165,Interrupt Processor Targets Register 165" hgroup.long 0xA98++0x03 hide.long 0x00 "GICD_ITARGETSR166,Interrupt Processor Targets Register 166" hgroup.long 0xA9C++0x03 hide.long 0x00 "GICD_ITARGETSR167,Interrupt Processor Targets Register 167" hgroup.long 0xAA0++0x03 hide.long 0x00 "GICD_ITARGETSR168,Interrupt Processor Targets Register 168" hgroup.long 0xAA4++0x03 hide.long 0x00 "GICD_ITARGETSR169,Interrupt Processor Targets Register 169" hgroup.long 0xAA8++0x03 hide.long 0x00 "GICD_ITARGETSR170,Interrupt Processor Targets Register 170" hgroup.long 0xAAC++0x03 hide.long 0x00 "GICD_ITARGETSR171,Interrupt Processor Targets Register 171" hgroup.long 0xAB0++0x03 hide.long 0x00 "GICD_ITARGETSR172,Interrupt Processor Targets Register 172" hgroup.long 0xAB4++0x03 hide.long 0x00 "GICD_ITARGETSR173,Interrupt Processor Targets Register 173" hgroup.long 0xAB8++0x03 hide.long 0x00 "GICD_ITARGETSR174,Interrupt Processor Targets Register 174" hgroup.long 0xABC++0x03 hide.long 0x00 "GICD_ITARGETSR175,Interrupt Processor Targets Register 175" hgroup.long 0xAC0++0x03 hide.long 0x00 "GICD_ITARGETSR176,Interrupt Processor Targets Register 176" hgroup.long 0xAC4++0x03 hide.long 0x00 "GICD_ITARGETSR177,Interrupt Processor Targets Register 177" hgroup.long 0xAC8++0x03 hide.long 0x00 "GICD_ITARGETSR178,Interrupt Processor Targets Register 178" hgroup.long 0xACC++0x03 hide.long 0x00 "GICD_ITARGETSR179,Interrupt Processor Targets Register 179" hgroup.long 0xAD0++0x03 hide.long 0x00 "GICD_ITARGETSR180,Interrupt Processor Targets Register 180" hgroup.long 0xAD4++0x03 hide.long 0x00 "GICD_ITARGETSR181,Interrupt Processor Targets Register 181" hgroup.long 0xAD8++0x03 hide.long 0x00 "GICD_ITARGETSR182,Interrupt Processor Targets Register 182" hgroup.long 0xADC++0x03 hide.long 0x00 "GICD_ITARGETSR183,Interrupt Processor Targets Register 183" hgroup.long 0xAE0++0x03 hide.long 0x00 "GICD_ITARGETSR184,Interrupt Processor Targets Register 184" hgroup.long 0xAE4++0x03 hide.long 0x00 "GICD_ITARGETSR185,Interrupt Processor Targets Register 185" hgroup.long 0xAE8++0x03 hide.long 0x00 "GICD_ITARGETSR186,Interrupt Processor Targets Register 186" hgroup.long 0xAEC++0x03 hide.long 0x00 "GICD_ITARGETSR187,Interrupt Processor Targets Register 187" hgroup.long 0xAF0++0x03 hide.long 0x00 "GICD_ITARGETSR188,Interrupt Processor Targets Register 188" hgroup.long 0xAF4++0x03 hide.long 0x00 "GICD_ITARGETSR189,Interrupt Processor Targets Register 189" hgroup.long 0xAF8++0x03 hide.long 0x00 "GICD_ITARGETSR190,Interrupt Processor Targets Register 190" hgroup.long 0xAFC++0x03 hide.long 0x00 "GICD_ITARGETSR191,Interrupt Processor Targets Register 191" hgroup.long 0xB00++0x03 hide.long 0x00 "GICD_ITARGETSR192,Interrupt Processor Targets Register 192" hgroup.long 0xB04++0x03 hide.long 0x00 "GICD_ITARGETSR193,Interrupt Processor Targets Register 193" hgroup.long 0xB08++0x03 hide.long 0x00 "GICD_ITARGETSR194,Interrupt Processor Targets Register 194" hgroup.long 0xB0C++0x03 hide.long 0x00 "GICD_ITARGETSR195,Interrupt Processor Targets Register 195" hgroup.long 0xB10++0x03 hide.long 0x00 "GICD_ITARGETSR196,Interrupt Processor Targets Register 196" hgroup.long 0xB14++0x03 hide.long 0x00 "GICD_ITARGETSR197,Interrupt Processor Targets Register 197" hgroup.long 0xB18++0x03 hide.long 0x00 "GICD_ITARGETSR198,Interrupt Processor Targets Register 198" hgroup.long 0xB1C++0x03 hide.long 0x00 "GICD_ITARGETSR199,Interrupt Processor Targets Register 199" hgroup.long 0xB20++0x03 hide.long 0x00 "GICD_ITARGETSR200,Interrupt Processor Targets Register 200" hgroup.long 0xB24++0x03 hide.long 0x00 "GICD_ITARGETSR201,Interrupt Processor Targets Register 201" hgroup.long 0xB28++0x03 hide.long 0x00 "GICD_ITARGETSR202,Interrupt Processor Targets Register 202" hgroup.long 0xB2C++0x03 hide.long 0x00 "GICD_ITARGETSR203,Interrupt Processor Targets Register 203" hgroup.long 0xB30++0x03 hide.long 0x00 "GICD_ITARGETSR204,Interrupt Processor Targets Register 204" hgroup.long 0xB34++0x03 hide.long 0x00 "GICD_ITARGETSR205,Interrupt Processor Targets Register 205" hgroup.long 0xB38++0x03 hide.long 0x00 "GICD_ITARGETSR206,Interrupt Processor Targets Register 206" hgroup.long 0xB3C++0x03 hide.long 0x00 "GICD_ITARGETSR207,Interrupt Processor Targets Register 207" hgroup.long 0xB40++0x03 hide.long 0x00 "GICD_ITARGETSR208,Interrupt Processor Targets Register 208" hgroup.long 0xB44++0x03 hide.long 0x00 "GICD_ITARGETSR209,Interrupt Processor Targets Register 209" hgroup.long 0xB48++0x03 hide.long 0x00 "GICD_ITARGETSR210,Interrupt Processor Targets Register 210" hgroup.long 0xB4C++0x03 hide.long 0x00 "GICD_ITARGETSR211,Interrupt Processor Targets Register 211" hgroup.long 0xB50++0x03 hide.long 0x00 "GICD_ITARGETSR212,Interrupt Processor Targets Register 212" hgroup.long 0xB54++0x03 hide.long 0x00 "GICD_ITARGETSR213,Interrupt Processor Targets Register 213" hgroup.long 0xB58++0x03 hide.long 0x00 "GICD_ITARGETSR214,Interrupt Processor Targets Register 214" hgroup.long 0xB5C++0x03 hide.long 0x00 "GICD_ITARGETSR215,Interrupt Processor Targets Register 215" hgroup.long 0xB60++0x03 hide.long 0x00 "GICD_ITARGETSR216,Interrupt Processor Targets Register 216" hgroup.long 0xB64++0x03 hide.long 0x00 "GICD_ITARGETSR217,Interrupt Processor Targets Register 217" hgroup.long 0xB68++0x03 hide.long 0x00 "GICD_ITARGETSR218,Interrupt Processor Targets Register 218" hgroup.long 0xB6C++0x03 hide.long 0x00 "GICD_ITARGETSR219,Interrupt Processor Targets Register 219" hgroup.long 0xB70++0x03 hide.long 0x00 "GICD_ITARGETSR220,Interrupt Processor Targets Register 220" hgroup.long 0xB74++0x03 hide.long 0x00 "GICD_ITARGETSR221,Interrupt Processor Targets Register 221" hgroup.long 0xB78++0x03 hide.long 0x00 "GICD_ITARGETSR222,Interrupt Processor Targets Register 222" hgroup.long 0xB7C++0x03 hide.long 0x00 "GICD_ITARGETSR223,Interrupt Processor Targets Register 223" hgroup.long 0xB80++0x03 hide.long 0x00 "GICD_ITARGETSR224,Interrupt Processor Targets Register 224" hgroup.long 0xB84++0x03 hide.long 0x00 "GICD_ITARGETSR225,Interrupt Processor Targets Register 225" hgroup.long 0xB88++0x03 hide.long 0x00 "GICD_ITARGETSR226,Interrupt Processor Targets Register 226" hgroup.long 0xB8C++0x03 hide.long 0x00 "GICD_ITARGETSR227,Interrupt Processor Targets Register 227" hgroup.long 0xB90++0x03 hide.long 0x00 "GICD_ITARGETSR228,Interrupt Processor Targets Register 228" hgroup.long 0xB94++0x03 hide.long 0x00 "GICD_ITARGETSR229,Interrupt Processor Targets Register 229" hgroup.long 0xB98++0x03 hide.long 0x00 "GICD_ITARGETSR230,Interrupt Processor Targets Register 230" hgroup.long 0xB9C++0x03 hide.long 0x00 "GICD_ITARGETSR231,Interrupt Processor Targets Register 231" hgroup.long 0xBA0++0x03 hide.long 0x00 "GICD_ITARGETSR232,Interrupt Processor Targets Register 232" hgroup.long 0xBA4++0x03 hide.long 0x00 "GICD_ITARGETSR233,Interrupt Processor Targets Register 233" hgroup.long 0xBA8++0x03 hide.long 0x00 "GICD_ITARGETSR234,Interrupt Processor Targets Register 234" hgroup.long 0xBAC++0x03 hide.long 0x00 "GICD_ITARGETSR235,Interrupt Processor Targets Register 235" hgroup.long 0xBB0++0x03 hide.long 0x00 "GICD_ITARGETSR236,Interrupt Processor Targets Register 236" hgroup.long 0xBB4++0x03 hide.long 0x00 "GICD_ITARGETSR237,Interrupt Processor Targets Register 237" hgroup.long 0xBB8++0x03 hide.long 0x00 "GICD_ITARGETSR238,Interrupt Processor Targets Register 238" hgroup.long 0xBBC++0x03 hide.long 0x00 "GICD_ITARGETSR239,Interrupt Processor Targets Register 239" hgroup.long 0xBC0++0x03 hide.long 0x00 "GICD_ITARGETSR240,Interrupt Processor Targets Register 240" hgroup.long 0xBC4++0x03 hide.long 0x00 "GICD_ITARGETSR241,Interrupt Processor Targets Register 241" hgroup.long 0xBC8++0x03 hide.long 0x00 "GICD_ITARGETSR242,Interrupt Processor Targets Register 242" hgroup.long 0xBCC++0x03 hide.long 0x00 "GICD_ITARGETSR243,Interrupt Processor Targets Register 243" hgroup.long 0xBD0++0x03 hide.long 0x00 "GICD_ITARGETSR244,Interrupt Processor Targets Register 244" hgroup.long 0xBD4++0x03 hide.long 0x00 "GICD_ITARGETSR245,Interrupt Processor Targets Register 245" hgroup.long 0xBD8++0x03 hide.long 0x00 "GICD_ITARGETSR246,Interrupt Processor Targets Register 246" hgroup.long 0xBDC++0x03 hide.long 0x00 "GICD_ITARGETSR247,Interrupt Processor Targets Register 247" hgroup.long 0xBE0++0x03 hide.long 0x00 "GICD_ITARGETSR248,Interrupt Processor Targets Register 248" hgroup.long 0xBE4++0x03 hide.long 0x00 "GICD_ITARGETSR249,Interrupt Processor Targets Register 249" hgroup.long 0xBE8++0x03 hide.long 0x00 "GICD_ITARGETSR250,Interrupt Processor Targets Register 250" hgroup.long 0xBEC++0x03 hide.long 0x00 "GICD_ITARGETSR251,Interrupt Processor Targets Register 251" hgroup.long 0xBF0++0x03 hide.long 0x00 "GICD_ITARGETSR252,Interrupt Processor Targets Register 252" hgroup.long 0xBF4++0x03 hide.long 0x00 "GICD_ITARGETSR253,Interrupt Processor Targets Register 253" hgroup.long 0xBF8++0x03 hide.long 0x00 "GICD_ITARGETSR254,Interrupt Processor Targets Register 254" endif tree.end width 14. tree "Configuration Registers" hgroup.long 0xC00++0x03 hide.long 0x00 "GICD_ICFGR0,Interrupt Configuration Register" textline " " rgroup.long 0xC04++0x03 line.long 0x00 "GICD_ICFGR1,Interrupt Configuration Register" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1) group.long 0xC08++0x03 line.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC0C++0x03 line.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC08++0x03 hide.long 0x00 "GICD_ICFGR2,Interrupt Configuration Register 2" hgroup.long 0xC0C++0x03 hide.long 0x00 "GICD_ICFGR3,Interrupt Configuration Register 3" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x2) group.long 0xC10++0x03 line.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC14++0x03 line.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC10++0x03 hide.long 0x00 "GICD_ICFGR4,Interrupt Configuration Register 4" hgroup.long 0xC14++0x03 hide.long 0x00 "GICD_ICFGR5,Interrupt Configuration Register 5" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x3) group.long 0xC18++0x03 line.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC1C++0x03 line.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC18++0x03 hide.long 0x00 "GICD_ICFGR6,Interrupt Configuration Register 6" hgroup.long 0xC1C++0x03 hide.long 0x00 "GICD_ICFGR7,Interrupt Configuration Register 7" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x4) group.long 0xC20++0x03 line.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC24++0x03 line.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC20++0x03 hide.long 0x00 "GICD_ICFGR8,Interrupt Configuration Register 8" hgroup.long 0xC24++0x03 hide.long 0x00 "GICD_ICFGR9,Interrupt Configuration Register 9" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x5) group.long 0xC28++0x03 line.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC2C++0x03 line.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC28++0x03 hide.long 0x00 "GICD_ICFGR10,Interrupt Configuration Register 10" hgroup.long 0xC2C++0x03 hide.long 0x00 "GICD_ICFGR11,Interrupt Configuration Register 11" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x6) group.long 0xC30++0x03 line.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC34++0x03 line.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC30++0x03 hide.long 0x00 "GICD_ICFGR12,Interrupt Configuration Register 12" hgroup.long 0xC34++0x03 hide.long 0x00 "GICD_ICFGR13,Interrupt Configuration Register 13" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x7) group.long 0xC38++0x03 line.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC3C++0x03 line.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC38++0x03 hide.long 0x00 "GICD_ICFGR14,Interrupt Configuration Register 14" hgroup.long 0xC3C++0x03 hide.long 0x00 "GICD_ICFGR15,Interrupt Configuration Register 15" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x8) group.long 0xC40++0x03 line.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC44++0x03 line.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC40++0x03 hide.long 0x00 "GICD_ICFGR16,Interrupt Configuration Register 16" hgroup.long 0xC44++0x03 hide.long 0x00 "GICD_ICFGR17,Interrupt Configuration Register 17" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x9) group.long 0xC48++0x03 line.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC4C++0x03 line.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC48++0x03 hide.long 0x00 "GICD_ICFGR18,Interrupt Configuration Register 18" hgroup.long 0xC4C++0x03 hide.long 0x00 "GICD_ICFGR19,Interrupt Configuration Register 19" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0xA) group.long 0xC50++0x03 line.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC54++0x03 line.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC50++0x03 hide.long 0x00 "GICD_ICFGR20,Interrupt Configuration Register 20" hgroup.long 0xC54++0x03 hide.long 0x00 "GICD_ICFGR21,Interrupt Configuration Register 21" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0xB) group.long 0xC58++0x03 line.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC5C++0x03 line.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC58++0x03 hide.long 0x00 "GICD_ICFGR22,Interrupt Configuration Register 22" hgroup.long 0xC5C++0x03 hide.long 0x00 "GICD_ICFGR23,Interrupt Configuration Register 23" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0xC) group.long 0xC60++0x03 line.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC64++0x03 line.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC60++0x03 hide.long 0x00 "GICD_ICFGR24,Interrupt Configuration Register 24" hgroup.long 0xC64++0x03 hide.long 0x00 "GICD_ICFGR25,Interrupt Configuration Register 25" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0xD) group.long 0xC68++0x03 line.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC6C++0x03 line.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC68++0x03 hide.long 0x00 "GICD_ICFGR26,Interrupt Configuration Register 26" hgroup.long 0xC6C++0x03 hide.long 0x00 "GICD_ICFGR27,Interrupt Configuration Register 27" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0xE) group.long 0xC70++0x03 line.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC74++0x03 line.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC70++0x03 hide.long 0x00 "GICD_ICFGR28,Interrupt Configuration Register 28" hgroup.long 0xC74++0x03 hide.long 0x00 "GICD_ICFGR29,Interrupt Configuration Register 29" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0xF) group.long 0xC78++0x03 line.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC7C++0x03 line.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC78++0x03 hide.long 0x00 "GICD_ICFGR30,Interrupt Configuration Register 30" hgroup.long 0xC7C++0x03 hide.long 0x00 "GICD_ICFGR31,Interrupt Configuration Register 31" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10) group.long 0xC80++0x03 line.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC84++0x03 line.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC80++0x03 hide.long 0x00 "GICD_ICFGR32,Interrupt Configuration Register 32" hgroup.long 0xC84++0x03 hide.long 0x00 "GICD_ICFGR33,Interrupt Configuration Register 33" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11) group.long 0xC88++0x03 line.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC8C++0x03 line.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC88++0x03 hide.long 0x00 "GICD_ICFGR34,Interrupt Configuration Register 34" hgroup.long 0xC8C++0x03 hide.long 0x00 "GICD_ICFGR35,Interrupt Configuration Register 35" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12) group.long 0xC90++0x03 line.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC94++0x03 line.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC90++0x03 hide.long 0x00 "GICD_ICFGR36,Interrupt Configuration Register 36" hgroup.long 0xC94++0x03 hide.long 0x00 "GICD_ICFGR37,Interrupt Configuration Register 37" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13) group.long 0xC98++0x03 line.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xC9C++0x03 line.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xC98++0x03 hide.long 0x00 "GICD_ICFGR38,Interrupt Configuration Register 38" hgroup.long 0xC9C++0x03 hide.long 0x00 "GICD_ICFGR39,Interrupt Configuration Register 39" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14) group.long 0xCA0++0x03 line.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCA4++0x03 line.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCA0++0x03 hide.long 0x00 "GICD_ICFGR40,Interrupt Configuration Register 40" hgroup.long 0xCA4++0x03 hide.long 0x00 "GICD_ICFGR41,Interrupt Configuration Register 41" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15) group.long 0xCA8++0x03 line.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCAC++0x03 line.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCA8++0x03 hide.long 0x00 "GICD_ICFGR42,Interrupt Configuration Register 42" hgroup.long 0xCAC++0x03 hide.long 0x00 "GICD_ICFGR43,Interrupt Configuration Register 43" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16) group.long 0xCB0++0x03 line.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCB4++0x03 line.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCB0++0x03 hide.long 0x00 "GICD_ICFGR44,Interrupt Configuration Register 44" hgroup.long 0xCB4++0x03 hide.long 0x00 "GICD_ICFGR45,Interrupt Configuration Register 45" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17) group.long 0xCB8++0x03 line.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCBC++0x03 line.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCB8++0x03 hide.long 0x00 "GICD_ICFGR46,Interrupt Configuration Register 46" hgroup.long 0xCBC++0x03 hide.long 0x00 "GICD_ICFGR47,Interrupt Configuration Register 47" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18) group.long 0xCC0++0x03 line.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCC4++0x03 line.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCC0++0x03 hide.long 0x00 "GICD_ICFGR48,Interrupt Configuration Register 48" hgroup.long 0xCC4++0x03 hide.long 0x00 "GICD_ICFGR49,Interrupt Configuration Register 49" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19) group.long 0xCC8++0x03 line.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCCC++0x03 line.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCC8++0x03 hide.long 0x00 "GICD_ICFGR50,Interrupt Configuration Register 50" hgroup.long 0xCCC++0x03 hide.long 0x00 "GICD_ICFGR51,Interrupt Configuration Register 51" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A) group.long 0xCD0++0x03 line.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCD4++0x03 line.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCD0++0x03 hide.long 0x00 "GICD_ICFGR52,Interrupt Configuration Register 52" hgroup.long 0xCD4++0x03 hide.long 0x00 "GICD_ICFGR53,Interrupt Configuration Register 53" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B) group.long 0xCD8++0x03 line.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCDC++0x03 line.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCD8++0x03 hide.long 0x00 "GICD_ICFGR54,Interrupt Configuration Register 54" hgroup.long 0xCDC++0x03 hide.long 0x00 "GICD_ICFGR55,Interrupt Configuration Register 55" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C) group.long 0xCE0++0x03 line.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCE4++0x03 line.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCE0++0x03 hide.long 0x00 "GICD_ICFGR56,Interrupt Configuration Register 56" hgroup.long 0xCE4++0x03 hide.long 0x00 "GICD_ICFGR57,Interrupt Configuration Register 57" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D) group.long 0xCE8++0x03 line.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCEC++0x03 line.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCE8++0x03 hide.long 0x00 "GICD_ICFGR58,Interrupt Configuration Register 58" hgroup.long 0xCEC++0x03 hide.long 0x00 "GICD_ICFGR59,Interrupt Configuration Register 59" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E) group.long 0xCF0++0x03 line.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCF4++0x03 line.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCF0++0x03 hide.long 0x00 "GICD_ICFGR60,Interrupt Configuration Register 60" hgroup.long 0xCF4++0x03 hide.long 0x00 "GICD_ICFGR61,Interrupt Configuration Register 61" endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1F) group.long 0xCF8++0x03 line.long 0x00 "GICD_ICFGR62,Interrupt Configuration Register 62" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" group.long 0xCFC++0x03 line.long 0x00 "GICD_ICFGR63,Interrupt Configuration Register 63" bitfld.long 0x00 31. " ICF15 ,Interrupt Configuration 15" "Level,Edge" bitfld.long 0x00 29. " ICF14 ,Interrupt Configuration 14" "Level,Edge" bitfld.long 0x00 27. " ICF13 ,Interrupt Configuration 13" "Level,Edge" textline " " bitfld.long 0x00 25. " ICF12 ,Interrupt Configuration 12" "Level,Edge" bitfld.long 0x00 23. " ICF11 ,Interrupt Configuration 11" "Level,Edge" bitfld.long 0x00 21. " ICF10 ,Interrupt Configuration 10" "Level,Edge" textline " " bitfld.long 0x00 19. " ICF9 ,Interrupt Configuration 9" "Level,Edge" bitfld.long 0x00 17. " ICF8 ,Interrupt Configuration 8" "Level,Edge" bitfld.long 0x00 15. " ICF7 ,Interrupt Configuration 7" "Level,Edge" textline " " bitfld.long 0x00 13. " ICF6 ,Interrupt Configuration 6" "Level,Edge" bitfld.long 0x00 11. " ICF5 ,Interrupt Configuration 5" "Level,Edge" bitfld.long 0x00 9. " ICF4 ,Interrupt Configuration 4" "Level,Edge" textline " " bitfld.long 0x00 7. " ICF3 ,Interrupt Configuration 3" "Level,Edge" bitfld.long 0x00 5. " ICF2 ,Interrupt Configuration 2" "Level,Edge" bitfld.long 0x00 3. " ICF1 ,Interrupt Configuration 1" "Level,Edge" textline " " bitfld.long 0x00 1. " ICF0 ,Interrupt Configuration 0" "Level,Edge" else hgroup.long 0xCF8++0x03 hide.long 0x00 "GICD_ICFGR62,Interrupt Configuration Register 62" hgroup.long 0xCFC++0x03 hide.long 0x00 "GICD_ICFGR63,Interrupt Configuration Register 63" endif tree.end width 12. tree "Peripheral Interrupt Status Registers" rgroup.long 0x0D00++0x03 line.long 0x00 "GICD_PPISR,Private Peripheral Interrupt Status Register" bitfld.long 0x00 15. " PPI_C[15] ,Returns the status of the ppi_c[15] inputs on the Distributor" "Low,High" bitfld.long 0x00 14. " PPI_C[14] ,Returns the status of the ppi_c[14] inputs on the Distributor" "Low,High" bitfld.long 0x00 13. " PPI_C[13] ,Returns the status of the ppi_c[13] inputs on the Distributor" "Low,High" bitfld.long 0x00 12. " PPI_C[12] ,Returns the status of the ppi_c[12] inputs on the Distributor" "Low,High" textline " " bitfld.long 0x00 11. " PPI_C[11] ,Returns the status of the ppi_c[11] inputs on the Distributor" "Low,High" bitfld.long 0x00 10. " PPI_C[10] ,Returns the status of the ppi_c[10] inputs on the Distributor" "Low,High" bitfld.long 0x00 9. " PPI_C[9] ,Returns the status of the ppi_c[9] inputs on the Distributor" "Low,High" bitfld.long 0x00 8. " PPI_C[8] ,Returns the status of the ppi_c[8] inputs on the Distributor" "Low,High" textline " " bitfld.long 0x00 7. " PPI_C[7] ,Returns the status of the ppi_c[7] inputs on the Distributor" "Low,High" bitfld.long 0x00 6. " PPI_C[6] ,Returns the status of the ppi_c[6] inputs on the Distributor" "Low,High" bitfld.long 0x00 5. " PPI_C[5] ,Returns the status of the ppi_c[5] inputs on the Distributor" "Low,High" bitfld.long 0x00 4. " PPI_C[4] ,Returns the status of the ppi_c[4] inputs on the Distributor" "Low,High" textline " " bitfld.long 0x00 3. " PPI_C[3] ,Returns the status of the ppi_c[3] inputs on the Distributor" "Low,High" bitfld.long 0x00 2. " PPI_C[2] ,Returns the status of the ppi_c[2] inputs on the Distributor" "Low,High" bitfld.long 0x00 1. " PPI_C[1] ,Returns the status of the ppi_c[1] inputs on the Distributor" "Low,High" bitfld.long 0x00 0. " PPI_C[0] ,Returns the status of the ppi_c[0] inputs on the Distributor" "Low,High" textline " " width 22. if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x01) rgroup.long 0x0D04++0x03 line.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 0" bitfld.long 0x00 31. " IRQS31 ,IRQS Status Bit 31" "Low,High" bitfld.long 0x00 30. " IRQS30 ,IRQS Status Bit 30" "Low,High" bitfld.long 0x00 29. " IRQS29 ,IRQS Status Bit 29" "Low,High" textline " " bitfld.long 0x00 28. " IRQS28 ,IRQS Status Bit 28" "Low,High" bitfld.long 0x00 27. " IRQS27 ,IRQS Status Bit 27" "Low,High" bitfld.long 0x00 26. " IRQS26 ,IRQS Status Bit 26" "Low,High" textline " " bitfld.long 0x00 25. " IRQS25 ,IRQS Status Bit 25" "Low,High" bitfld.long 0x00 24. " IRQS24 ,IRQS Status Bit 24" "Low,High" bitfld.long 0x00 23. " IRQS23 ,IRQS Status Bit 23" "Low,High" textline " " bitfld.long 0x00 22. " IRQS22 ,IRQS Status Bit 22" "Low,High" bitfld.long 0x00 21. " IRQS21 ,IRQS Status Bit 21" "Low,High" bitfld.long 0x00 20. " IRQS20 ,IRQS Status Bit 20" "Low,High" textline " " bitfld.long 0x00 19. " IRQS19 ,IRQS Status Bit 19" "Low,High" bitfld.long 0x00 18. " IRQS18 ,IRQS Status Bit 18" "Low,High" bitfld.long 0x00 17. " IRQS17 ,IRQS Status Bit 17" "Low,High" textline " " bitfld.long 0x00 16. " IRQS16 ,IRQS Status Bit 16" "Low,High" bitfld.long 0x00 15. " IRQS15 ,IRQS Status Bit 15" "Low,High" bitfld.long 0x00 14. " IRQS14 ,IRQS Status Bit 14" "Low,High" textline " " bitfld.long 0x00 13. " IRQS13 ,IRQS Status Bit 13" "Low,High" bitfld.long 0x00 12. " IRQS12 ,IRQS Status Bit 12" "Low,High" bitfld.long 0x00 11. " IRQS11 ,IRQS Status Bit 11" "Low,High" textline " " bitfld.long 0x00 10. " IRQS10 ,IRQS Status Bit 10" "Low,High" bitfld.long 0x00 9. " IRQS9 ,IRQS Status Bit 9" "Low,High" bitfld.long 0x00 8. " IRQS8 ,IRQS Status Bit 8" "Low,High" textline " " bitfld.long 0x00 7. " IRQS7 ,IRQS Status Bit 7" "Low,High" bitfld.long 0x00 6. " IRQS6 ,IRQS Status Bit 6" "Low,High" bitfld.long 0x00 5. " IRQS5 ,IRQS Status Bit 5" "Low,High" textline " " bitfld.long 0x00 4. " IRQS4 ,IRQS Status Bit 4" "Low,High" bitfld.long 0x00 3. " IRQS3 ,IRQS Status Bit 3" "Low,High" bitfld.long 0x00 2. " IRQS2 ,IRQS Status Bit 2" "Low,High" textline " " bitfld.long 0x00 1. " IRQS1 ,IRQS Status Bit 1" "Low,High" bitfld.long 0x00 0. " IRQS0 ,IRQS Status Bit 0" "Low,High" else hgroup.long 0x0D04++0x03 hide.long 0x0 "GICD_SPISR0,Shared Peripheral Interrupt Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x02) rgroup.long 0x0D08++0x03 line.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1" bitfld.long 0x00 31. " IRQS63 ,IRQS Status Bit 63" "Low,High" bitfld.long 0x00 30. " IRQS62 ,IRQS Status Bit 62" "Low,High" bitfld.long 0x00 29. " IRQS61 ,IRQS Status Bit 61" "Low,High" textline " " bitfld.long 0x00 28. " IRQS60 ,IRQS Status Bit 60" "Low,High" bitfld.long 0x00 27. " IRQS59 ,IRQS Status Bit 59" "Low,High" bitfld.long 0x00 26. " IRQS58 ,IRQS Status Bit 58" "Low,High" textline " " bitfld.long 0x00 25. " IRQS57 ,IRQS Status Bit 57" "Low,High" bitfld.long 0x00 24. " IRQS56 ,IRQS Status Bit 56" "Low,High" bitfld.long 0x00 23. " IRQS55 ,IRQS Status Bit 55" "Low,High" textline " " bitfld.long 0x00 22. " IRQS54 ,IRQS Status Bit 54" "Low,High" bitfld.long 0x00 21. " IRQS53 ,IRQS Status Bit 53" "Low,High" bitfld.long 0x00 20. " IRQS52 ,IRQS Status Bit 52" "Low,High" textline " " bitfld.long 0x00 19. " IRQS51 ,IRQS Status Bit 51" "Low,High" bitfld.long 0x00 18. " IRQS50 ,IRQS Status Bit 50" "Low,High" bitfld.long 0x00 17. " IRQS49 ,IRQS Status Bit 49" "Low,High" textline " " bitfld.long 0x00 16. " IRQS48 ,IRQS Status Bit 48" "Low,High" bitfld.long 0x00 15. " IRQS47 ,IRQS Status Bit 47" "Low,High" bitfld.long 0x00 14. " IRQS46 ,IRQS Status Bit 46" "Low,High" textline " " bitfld.long 0x00 13. " IRQS45 ,IRQS Status Bit 45" "Low,High" bitfld.long 0x00 12. " IRQS44 ,IRQS Status Bit 44" "Low,High" bitfld.long 0x00 11. " IRQS43 ,IRQS Status Bit 43" "Low,High" textline " " bitfld.long 0x00 10. " IRQS42 ,IRQS Status Bit 42" "Low,High" bitfld.long 0x00 9. " IRQS41 ,IRQS Status Bit 41" "Low,High" bitfld.long 0x00 8. " IRQS40 ,IRQS Status Bit 40" "Low,High" textline " " bitfld.long 0x00 7. " IRQS39 ,IRQS Status Bit 39" "Low,High" bitfld.long 0x00 6. " IRQS38 ,IRQS Status Bit 38" "Low,High" bitfld.long 0x00 5. " IRQS37 ,IRQS Status Bit 37" "Low,High" textline " " bitfld.long 0x00 4. " IRQS36 ,IRQS Status Bit 36" "Low,High" bitfld.long 0x00 3. " IRQS35 ,IRQS Status Bit 35" "Low,High" bitfld.long 0x00 2. " IRQS34 ,IRQS Status Bit 34" "Low,High" textline " " bitfld.long 0x00 1. " IRQS33 ,IRQS Status Bit 33" "Low,High" bitfld.long 0x00 0. " IRQS32 ,IRQS Status Bit 32" "Low,High" else hgroup.long 0x0D08++0x03 hide.long 0x0 "GICD_SPISR1,Shared Peripheral Interrupt Status Register 1" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x03) rgroup.long 0x0D0C++0x03 line.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2" bitfld.long 0x00 31. " IRQS95 ,IRQS Status Bit 95" "Low,High" bitfld.long 0x00 30. " IRQS94 ,IRQS Status Bit 94" "Low,High" bitfld.long 0x00 29. " IRQS93 ,IRQS Status Bit 93" "Low,High" textline " " bitfld.long 0x00 28. " IRQS92 ,IRQS Status Bit 92" "Low,High" bitfld.long 0x00 27. " IRQS91 ,IRQS Status Bit 91" "Low,High" bitfld.long 0x00 26. " IRQS90 ,IRQS Status Bit 90" "Low,High" textline " " bitfld.long 0x00 25. " IRQS89 ,IRQS Status Bit 89" "Low,High" bitfld.long 0x00 24. " IRQS88 ,IRQS Status Bit 88" "Low,High" bitfld.long 0x00 23. " IRQS87 ,IRQS Status Bit 87" "Low,High" textline " " bitfld.long 0x00 22. " IRQS86 ,IRQS Status Bit 86" "Low,High" bitfld.long 0x00 21. " IRQS85 ,IRQS Status Bit 85" "Low,High" bitfld.long 0x00 20. " IRQS84 ,IRQS Status Bit 84" "Low,High" textline " " bitfld.long 0x00 19. " IRQS83 ,IRQS Status Bit 83" "Low,High" bitfld.long 0x00 18. " IRQS82 ,IRQS Status Bit 82" "Low,High" bitfld.long 0x00 17. " IRQS81 ,IRQS Status Bit 81" "Low,High" textline " " bitfld.long 0x00 16. " IRQS80 ,IRQS Status Bit 80" "Low,High" bitfld.long 0x00 15. " IRQS79 ,IRQS Status Bit 79" "Low,High" bitfld.long 0x00 14. " IRQS78 ,IRQS Status Bit 78" "Low,High" textline " " bitfld.long 0x00 13. " IRQS77 ,IRQS Status Bit 77" "Low,High" bitfld.long 0x00 12. " IRQS76 ,IRQS Status Bit 76" "Low,High" bitfld.long 0x00 11. " IRQS75 ,IRQS Status Bit 75" "Low,High" textline " " bitfld.long 0x00 10. " IRQS74 ,IRQS Status Bit 74" "Low,High" bitfld.long 0x00 9. " IRQS73 ,IRQS Status Bit 73" "Low,High" bitfld.long 0x00 8. " IRQS72 ,IRQS Status Bit 72" "Low,High" textline " " bitfld.long 0x00 7. " IRQS71 ,IRQS Status Bit 71" "Low,High" bitfld.long 0x00 6. " IRQS70 ,IRQS Status Bit 70" "Low,High" bitfld.long 0x00 5. " IRQS69 ,IRQS Status Bit 69" "Low,High" textline " " bitfld.long 0x00 4. " IRQS68 ,IRQS Status Bit 68" "Low,High" bitfld.long 0x00 3. " IRQS67 ,IRQS Status Bit 67" "Low,High" bitfld.long 0x00 2. " IRQS66 ,IRQS Status Bit 66" "Low,High" textline " " bitfld.long 0x00 1. " IRQS65 ,IRQS Status Bit 65" "Low,High" bitfld.long 0x00 0. " IRQS64 ,IRQS Status Bit 64" "Low,High" else hgroup.long 0x0D0C++0x03 hide.long 0x0 "GICD_SPISR2,Shared Peripheral Interrupt Status Register 2" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x04) rgroup.long 0x0D10++0x03 line.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3" bitfld.long 0x00 31. " IRQS127 ,IRQS Status Bit 127" "Low,High" bitfld.long 0x00 30. " IRQS126 ,IRQS Status Bit 126" "Low,High" bitfld.long 0x00 29. " IRQS125 ,IRQS Status Bit 125" "Low,High" textline " " bitfld.long 0x00 28. " IRQS124 ,IRQS Status Bit 124" "Low,High" bitfld.long 0x00 27. " IRQS123 ,IRQS Status Bit 123" "Low,High" bitfld.long 0x00 26. " IRQS122 ,IRQS Status Bit 122" "Low,High" textline " " bitfld.long 0x00 25. " IRQS121 ,IRQS Status Bit 121" "Low,High" bitfld.long 0x00 24. " IRQS120 ,IRQS Status Bit 120" "Low,High" bitfld.long 0x00 23. " IRQS119 ,IRQS Status Bit 119" "Low,High" textline " " bitfld.long 0x00 22. " IRQS118 ,IRQS Status Bit 118" "Low,High" bitfld.long 0x00 21. " IRQS117 ,IRQS Status Bit 117" "Low,High" bitfld.long 0x00 20. " IRQS116 ,IRQS Status Bit 116" "Low,High" textline " " bitfld.long 0x00 19. " IRQS115 ,IRQS Status Bit 115" "Low,High" bitfld.long 0x00 18. " IRQS114 ,IRQS Status Bit 114" "Low,High" bitfld.long 0x00 17. " IRQS113 ,IRQS Status Bit 113" "Low,High" textline " " bitfld.long 0x00 16. " IRQS112 ,IRQS Status Bit 112" "Low,High" bitfld.long 0x00 15. " IRQS111 ,IRQS Status Bit 111" "Low,High" bitfld.long 0x00 14. " IRQS110 ,IRQS Status Bit 110" "Low,High" textline " " bitfld.long 0x00 13. " IRQS109 ,IRQS Status Bit 109" "Low,High" bitfld.long 0x00 12. " IRQS108 ,IRQS Status Bit 108" "Low,High" bitfld.long 0x00 11. " IRQS107 ,IRQS Status Bit 107" "Low,High" textline " " bitfld.long 0x00 10. " IRQS106 ,IRQS Status Bit 106" "Low,High" bitfld.long 0x00 9. " IRQS105 ,IRQS Status Bit 105" "Low,High" bitfld.long 0x00 8. " IRQS104 ,IRQS Status Bit 104" "Low,High" textline " " bitfld.long 0x00 7. " IRQS103 ,IRQS Status Bit 103" "Low,High" bitfld.long 0x00 6. " IRQS102 ,IRQS Status Bit 102" "Low,High" bitfld.long 0x00 5. " IRQS101 ,IRQS Status Bit 101" "Low,High" textline " " bitfld.long 0x00 4. " IRQS100 ,IRQS Status Bit 100" "Low,High" bitfld.long 0x00 3. " IRQS99 ,IRQS Status Bit 99" "Low,High" bitfld.long 0x00 2. " IRQS98 ,IRQS Status Bit 98" "Low,High" textline " " bitfld.long 0x00 1. " IRQS97 ,IRQS Status Bit 97" "Low,High" bitfld.long 0x00 0. " IRQS96 ,IRQS Status Bit 96" "Low,High" else hgroup.long 0x0D10++0x03 hide.long 0x0 "GICD_SPISR3,Shared Peripheral Interrupt Status Register 3" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x05) rgroup.long 0x0D14++0x03 line.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4" bitfld.long 0x00 31. " IRQS159 ,IRQS Status Bit 159" "Low,High" bitfld.long 0x00 30. " IRQS158 ,IRQS Status Bit 158" "Low,High" bitfld.long 0x00 29. " IRQS157 ,IRQS Status Bit 157" "Low,High" textline " " bitfld.long 0x00 28. " IRQS156 ,IRQS Status Bit 156" "Low,High" bitfld.long 0x00 27. " IRQS155 ,IRQS Status Bit 155" "Low,High" bitfld.long 0x00 26. " IRQS154 ,IRQS Status Bit 154" "Low,High" textline " " bitfld.long 0x00 25. " IRQS153 ,IRQS Status Bit 153" "Low,High" bitfld.long 0x00 24. " IRQS152 ,IRQS Status Bit 152" "Low,High" bitfld.long 0x00 23. " IRQS151 ,IRQS Status Bit 151" "Low,High" textline " " bitfld.long 0x00 22. " IRQS150 ,IRQS Status Bit 150" "Low,High" bitfld.long 0x00 21. " IRQS149 ,IRQS Status Bit 149" "Low,High" bitfld.long 0x00 20. " IRQS148 ,IRQS Status Bit 148" "Low,High" textline " " bitfld.long 0x00 19. " IRQS147 ,IRQS Status Bit 147" "Low,High" bitfld.long 0x00 18. " IRQS146 ,IRQS Status Bit 146" "Low,High" bitfld.long 0x00 17. " IRQS145 ,IRQS Status Bit 145" "Low,High" textline " " bitfld.long 0x00 16. " IRQS144 ,IRQS Status Bit 144" "Low,High" bitfld.long 0x00 15. " IRQS143 ,IRQS Status Bit 143" "Low,High" bitfld.long 0x00 14. " IRQS142 ,IRQS Status Bit 142" "Low,High" textline " " bitfld.long 0x00 13. " IRQS141 ,IRQS Status Bit 141" "Low,High" bitfld.long 0x00 12. " IRQS140 ,IRQS Status Bit 140" "Low,High" bitfld.long 0x00 11. " IRQS139 ,IRQS Status Bit 139" "Low,High" textline " " bitfld.long 0x00 10. " IRQS138 ,IRQS Status Bit 138" "Low,High" bitfld.long 0x00 9. " IRQS137 ,IRQS Status Bit 137" "Low,High" bitfld.long 0x00 8. " IRQS136 ,IRQS Status Bit 136" "Low,High" textline " " bitfld.long 0x00 7. " IRQS135 ,IRQS Status Bit 135" "Low,High" bitfld.long 0x00 6. " IRQS134 ,IRQS Status Bit 134" "Low,High" bitfld.long 0x00 5. " IRQS133 ,IRQS Status Bit 133" "Low,High" textline " " bitfld.long 0x00 4. " IRQS132 ,IRQS Status Bit 132" "Low,High" bitfld.long 0x00 3. " IRQS131 ,IRQS Status Bit 131" "Low,High" bitfld.long 0x00 2. " IRQS130 ,IRQS Status Bit 130" "Low,High" textline " " bitfld.long 0x00 1. " IRQS129 ,IRQS Status Bit 129" "Low,High" bitfld.long 0x00 0. " IRQS128 ,IRQS Status Bit 128" "Low,High" else hgroup.long 0x0D14++0x03 hide.long 0x0 "GICD_SPISR4,Shared Peripheral Interrupt Status Register 4" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x06) rgroup.long 0x0D18++0x03 line.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5" bitfld.long 0x00 31. " IRQS191 ,IRQS Status Bit 191" "Low,High" bitfld.long 0x00 30. " IRQS190 ,IRQS Status Bit 190" "Low,High" bitfld.long 0x00 29. " IRQS189 ,IRQS Status Bit 189" "Low,High" textline " " bitfld.long 0x00 28. " IRQS188 ,IRQS Status Bit 188" "Low,High" bitfld.long 0x00 27. " IRQS187 ,IRQS Status Bit 187" "Low,High" bitfld.long 0x00 26. " IRQS186 ,IRQS Status Bit 186" "Low,High" textline " " bitfld.long 0x00 25. " IRQS185 ,IRQS Status Bit 185" "Low,High" bitfld.long 0x00 24. " IRQS184 ,IRQS Status Bit 184" "Low,High" bitfld.long 0x00 23. " IRQS183 ,IRQS Status Bit 183" "Low,High" textline " " bitfld.long 0x00 22. " IRQS182 ,IRQS Status Bit 182" "Low,High" bitfld.long 0x00 21. " IRQS181 ,IRQS Status Bit 181" "Low,High" bitfld.long 0x00 20. " IRQS180 ,IRQS Status Bit 180" "Low,High" textline " " bitfld.long 0x00 19. " IRQS179 ,IRQS Status Bit 179" "Low,High" bitfld.long 0x00 18. " IRQS178 ,IRQS Status Bit 178" "Low,High" bitfld.long 0x00 17. " IRQS177 ,IRQS Status Bit 177" "Low,High" textline " " bitfld.long 0x00 16. " IRQS176 ,IRQS Status Bit 176" "Low,High" bitfld.long 0x00 15. " IRQS175 ,IRQS Status Bit 175" "Low,High" bitfld.long 0x00 14. " IRQS174 ,IRQS Status Bit 174" "Low,High" textline " " bitfld.long 0x00 13. " IRQS173 ,IRQS Status Bit 173" "Low,High" bitfld.long 0x00 12. " IRQS172 ,IRQS Status Bit 172" "Low,High" bitfld.long 0x00 11. " IRQS171 ,IRQS Status Bit 171" "Low,High" textline " " bitfld.long 0x00 10. " IRQS170 ,IRQS Status Bit 170" "Low,High" bitfld.long 0x00 9. " IRQS169 ,IRQS Status Bit 169" "Low,High" bitfld.long 0x00 8. " IRQS168 ,IRQS Status Bit 168" "Low,High" textline " " bitfld.long 0x00 7. " IRQS167 ,IRQS Status Bit 167" "Low,High" bitfld.long 0x00 6. " IRQS166 ,IRQS Status Bit 166" "Low,High" bitfld.long 0x00 5. " IRQS165 ,IRQS Status Bit 165" "Low,High" textline " " bitfld.long 0x00 4. " IRQS164 ,IRQS Status Bit 164" "Low,High" bitfld.long 0x00 3. " IRQS163 ,IRQS Status Bit 163" "Low,High" bitfld.long 0x00 2. " IRQS162 ,IRQS Status Bit 162" "Low,High" textline " " bitfld.long 0x00 1. " IRQS161 ,IRQS Status Bit 161" "Low,High" bitfld.long 0x00 0. " IRQS160 ,IRQS Status Bit 160" "Low,High" else hgroup.long 0x0D18++0x03 hide.long 0x0 "GICD_SPISR5,Shared Peripheral Interrupt Status Register 5" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x07) rgroup.long 0x0D1C++0x03 line.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6" bitfld.long 0x00 31. " IRQS223 ,IRQS Status Bit 223" "Low,High" bitfld.long 0x00 30. " IRQS222 ,IRQS Status Bit 222" "Low,High" bitfld.long 0x00 29. " IRQS221 ,IRQS Status Bit 221" "Low,High" textline " " bitfld.long 0x00 28. " IRQS220 ,IRQS Status Bit 220" "Low,High" bitfld.long 0x00 27. " IRQS219 ,IRQS Status Bit 219" "Low,High" bitfld.long 0x00 26. " IRQS218 ,IRQS Status Bit 218" "Low,High" textline " " bitfld.long 0x00 25. " IRQS217 ,IRQS Status Bit 217" "Low,High" bitfld.long 0x00 24. " IRQS216 ,IRQS Status Bit 216" "Low,High" bitfld.long 0x00 23. " IRQS215 ,IRQS Status Bit 215" "Low,High" textline " " bitfld.long 0x00 22. " IRQS214 ,IRQS Status Bit 214" "Low,High" bitfld.long 0x00 21. " IRQS213 ,IRQS Status Bit 213" "Low,High" bitfld.long 0x00 20. " IRQS212 ,IRQS Status Bit 212" "Low,High" textline " " bitfld.long 0x00 19. " IRQS211 ,IRQS Status Bit 211" "Low,High" bitfld.long 0x00 18. " IRQS210 ,IRQS Status Bit 210" "Low,High" bitfld.long 0x00 17. " IRQS209 ,IRQS Status Bit 209" "Low,High" textline " " bitfld.long 0x00 16. " IRQS208 ,IRQS Status Bit 208" "Low,High" bitfld.long 0x00 15. " IRQS207 ,IRQS Status Bit 207" "Low,High" bitfld.long 0x00 14. " IRQS206 ,IRQS Status Bit 206" "Low,High" textline " " bitfld.long 0x00 13. " IRQS205 ,IRQS Status Bit 205" "Low,High" bitfld.long 0x00 12. " IRQS204 ,IRQS Status Bit 204" "Low,High" bitfld.long 0x00 11. " IRQS203 ,IRQS Status Bit 203" "Low,High" textline " " bitfld.long 0x00 10. " IRQS202 ,IRQS Status Bit 202" "Low,High" bitfld.long 0x00 9. " IRQS201 ,IRQS Status Bit 201" "Low,High" bitfld.long 0x00 8. " IRQS200 ,IRQS Status Bit 200" "Low,High" textline " " bitfld.long 0x00 7. " IRQS199 ,IRQS Status Bit 199" "Low,High" bitfld.long 0x00 6. " IRQS198 ,IRQS Status Bit 198" "Low,High" bitfld.long 0x00 5. " IRQS197 ,IRQS Status Bit 197" "Low,High" textline " " bitfld.long 0x00 4. " IRQS196 ,IRQS Status Bit 196" "Low,High" bitfld.long 0x00 3. " IRQS195 ,IRQS Status Bit 195" "Low,High" bitfld.long 0x00 2. " IRQS194 ,IRQS Status Bit 194" "Low,High" textline " " bitfld.long 0x00 1. " IRQS193 ,IRQS Status Bit 193" "Low,High" bitfld.long 0x00 0. " IRQS192 ,IRQS Status Bit 192" "Low,High" else hgroup.long 0x0D1C++0x03 hide.long 0x0 "GICD_SPISR6,Shared Peripheral Interrupt Status Register 6" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x08) rgroup.long 0x0D20++0x03 line.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7" bitfld.long 0x00 31. " IRQS255 ,IRQS Status Bit 255" "Low,High" bitfld.long 0x00 30. " IRQS254 ,IRQS Status Bit 254" "Low,High" bitfld.long 0x00 29. " IRQS253 ,IRQS Status Bit 253" "Low,High" textline " " bitfld.long 0x00 28. " IRQS252 ,IRQS Status Bit 252" "Low,High" bitfld.long 0x00 27. " IRQS251 ,IRQS Status Bit 251" "Low,High" bitfld.long 0x00 26. " IRQS250 ,IRQS Status Bit 250" "Low,High" textline " " bitfld.long 0x00 25. " IRQS249 ,IRQS Status Bit 249" "Low,High" bitfld.long 0x00 24. " IRQS248 ,IRQS Status Bit 248" "Low,High" bitfld.long 0x00 23. " IRQS247 ,IRQS Status Bit 247" "Low,High" textline " " bitfld.long 0x00 22. " IRQS246 ,IRQS Status Bit 246" "Low,High" bitfld.long 0x00 21. " IRQS245 ,IRQS Status Bit 245" "Low,High" bitfld.long 0x00 20. " IRQS244 ,IRQS Status Bit 244" "Low,High" textline " " bitfld.long 0x00 19. " IRQS243 ,IRQS Status Bit 243" "Low,High" bitfld.long 0x00 18. " IRQS242 ,IRQS Status Bit 242" "Low,High" bitfld.long 0x00 17. " IRQS241 ,IRQS Status Bit 241" "Low,High" textline " " bitfld.long 0x00 16. " IRQS240 ,IRQS Status Bit 240" "Low,High" bitfld.long 0x00 15. " IRQS239 ,IRQS Status Bit 239" "Low,High" bitfld.long 0x00 14. " IRQS238 ,IRQS Status Bit 238" "Low,High" textline " " bitfld.long 0x00 13. " IRQS237 ,IRQS Status Bit 237" "Low,High" bitfld.long 0x00 12. " IRQS236 ,IRQS Status Bit 236" "Low,High" bitfld.long 0x00 11. " IRQS235 ,IRQS Status Bit 235" "Low,High" textline " " bitfld.long 0x00 10. " IRQS234 ,IRQS Status Bit 234" "Low,High" bitfld.long 0x00 9. " IRQS233 ,IRQS Status Bit 233" "Low,High" bitfld.long 0x00 8. " IRQS232 ,IRQS Status Bit 232" "Low,High" textline " " bitfld.long 0x00 7. " IRQS231 ,IRQS Status Bit 231" "Low,High" bitfld.long 0x00 6. " IRQS230 ,IRQS Status Bit 230" "Low,High" bitfld.long 0x00 5. " IRQS229 ,IRQS Status Bit 229" "Low,High" textline " " bitfld.long 0x00 4. " IRQS228 ,IRQS Status Bit 228" "Low,High" bitfld.long 0x00 3. " IRQS227 ,IRQS Status Bit 227" "Low,High" bitfld.long 0x00 2. " IRQS226 ,IRQS Status Bit 226" "Low,High" textline " " bitfld.long 0x00 1. " IRQS225 ,IRQS Status Bit 225" "Low,High" bitfld.long 0x00 0. " IRQS224 ,IRQS Status Bit 224" "Low,High" else hgroup.long 0x0D20++0x03 hide.long 0x0 "GICD_SPISR7,Shared Peripheral Interrupt Status Register 7" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x09) rgroup.long 0x0D24++0x03 line.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8" bitfld.long 0x00 31. " IRQS287 ,IRQS Status Bit 287" "Low,High" bitfld.long 0x00 30. " IRQS286 ,IRQS Status Bit 286" "Low,High" bitfld.long 0x00 29. " IRQS285 ,IRQS Status Bit 285" "Low,High" textline " " bitfld.long 0x00 28. " IRQS284 ,IRQS Status Bit 284" "Low,High" bitfld.long 0x00 27. " IRQS283 ,IRQS Status Bit 283" "Low,High" bitfld.long 0x00 26. " IRQS282 ,IRQS Status Bit 282" "Low,High" textline " " bitfld.long 0x00 25. " IRQS281 ,IRQS Status Bit 281" "Low,High" bitfld.long 0x00 24. " IRQS280 ,IRQS Status Bit 280" "Low,High" bitfld.long 0x00 23. " IRQS279 ,IRQS Status Bit 279" "Low,High" textline " " bitfld.long 0x00 22. " IRQS278 ,IRQS Status Bit 278" "Low,High" bitfld.long 0x00 21. " IRQS277 ,IRQS Status Bit 277" "Low,High" bitfld.long 0x00 20. " IRQS276 ,IRQS Status Bit 276" "Low,High" textline " " bitfld.long 0x00 19. " IRQS275 ,IRQS Status Bit 275" "Low,High" bitfld.long 0x00 18. " IRQS274 ,IRQS Status Bit 274" "Low,High" bitfld.long 0x00 17. " IRQS273 ,IRQS Status Bit 273" "Low,High" textline " " bitfld.long 0x00 16. " IRQS272 ,IRQS Status Bit 272" "Low,High" bitfld.long 0x00 15. " IRQS271 ,IRQS Status Bit 271" "Low,High" bitfld.long 0x00 14. " IRQS270 ,IRQS Status Bit 270" "Low,High" textline " " bitfld.long 0x00 13. " IRQS269 ,IRQS Status Bit 269" "Low,High" bitfld.long 0x00 12. " IRQS268 ,IRQS Status Bit 268" "Low,High" bitfld.long 0x00 11. " IRQS267 ,IRQS Status Bit 267" "Low,High" textline " " bitfld.long 0x00 10. " IRQS266 ,IRQS Status Bit 266" "Low,High" bitfld.long 0x00 9. " IRQS265 ,IRQS Status Bit 265" "Low,High" bitfld.long 0x00 8. " IRQS264 ,IRQS Status Bit 264" "Low,High" textline " " bitfld.long 0x00 7. " IRQS263 ,IRQS Status Bit 263" "Low,High" bitfld.long 0x00 6. " IRQS262 ,IRQS Status Bit 262" "Low,High" bitfld.long 0x00 5. " IRQS261 ,IRQS Status Bit 261" "Low,High" textline " " bitfld.long 0x00 4. " IRQS260 ,IRQS Status Bit 260" "Low,High" bitfld.long 0x00 3. " IRQS259 ,IRQS Status Bit 259" "Low,High" bitfld.long 0x00 2. " IRQS258 ,IRQS Status Bit 258" "Low,High" textline " " bitfld.long 0x00 1. " IRQS257 ,IRQS Status Bit 257" "Low,High" bitfld.long 0x00 0. " IRQS256 ,IRQS Status Bit 256" "Low,High" else hgroup.long 0x0D24++0x03 hide.long 0x0 "GICD_SPISR8,Shared Peripheral Interrupt Status Register 8" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0A) rgroup.long 0x0D28++0x03 line.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9" bitfld.long 0x00 31. " IRQS319 ,IRQS Status Bit 319" "Low,High" bitfld.long 0x00 30. " IRQS318 ,IRQS Status Bit 318" "Low,High" bitfld.long 0x00 29. " IRQS317 ,IRQS Status Bit 317" "Low,High" textline " " bitfld.long 0x00 28. " IRQS316 ,IRQS Status Bit 316" "Low,High" bitfld.long 0x00 27. " IRQS315 ,IRQS Status Bit 315" "Low,High" bitfld.long 0x00 26. " IRQS314 ,IRQS Status Bit 314" "Low,High" textline " " bitfld.long 0x00 25. " IRQS313 ,IRQS Status Bit 313" "Low,High" bitfld.long 0x00 24. " IRQS312 ,IRQS Status Bit 312" "Low,High" bitfld.long 0x00 23. " IRQS311 ,IRQS Status Bit 311" "Low,High" textline " " bitfld.long 0x00 22. " IRQS310 ,IRQS Status Bit 310" "Low,High" bitfld.long 0x00 21. " IRQS309 ,IRQS Status Bit 309" "Low,High" bitfld.long 0x00 20. " IRQS308 ,IRQS Status Bit 308" "Low,High" textline " " bitfld.long 0x00 19. " IRQS307 ,IRQS Status Bit 307" "Low,High" bitfld.long 0x00 18. " IRQS306 ,IRQS Status Bit 306" "Low,High" bitfld.long 0x00 17. " IRQS305 ,IRQS Status Bit 305" "Low,High" textline " " bitfld.long 0x00 16. " IRQS304 ,IRQS Status Bit 304" "Low,High" bitfld.long 0x00 15. " IRQS303 ,IRQS Status Bit 303" "Low,High" bitfld.long 0x00 14. " IRQS302 ,IRQS Status Bit 302" "Low,High" textline " " bitfld.long 0x00 13. " IRQS301 ,IRQS Status Bit 301" "Low,High" bitfld.long 0x00 12. " IRQS300 ,IRQS Status Bit 300" "Low,High" bitfld.long 0x00 11. " IRQS299 ,IRQS Status Bit 299" "Low,High" textline " " bitfld.long 0x00 10. " IRQS298 ,IRQS Status Bit 298" "Low,High" bitfld.long 0x00 9. " IRQS297 ,IRQS Status Bit 297" "Low,High" bitfld.long 0x00 8. " IRQS296 ,IRQS Status Bit 296" "Low,High" textline " " bitfld.long 0x00 7. " IRQS295 ,IRQS Status Bit 295" "Low,High" bitfld.long 0x00 6. " IRQS294 ,IRQS Status Bit 294" "Low,High" bitfld.long 0x00 5. " IRQS293 ,IRQS Status Bit 293" "Low,High" textline " " bitfld.long 0x00 4. " IRQS292 ,IRQS Status Bit 292" "Low,High" bitfld.long 0x00 3. " IRQS291 ,IRQS Status Bit 291" "Low,High" bitfld.long 0x00 2. " IRQS290 ,IRQS Status Bit 290" "Low,High" textline " " bitfld.long 0x00 1. " IRQS289 ,IRQS Status Bit 289" "Low,High" bitfld.long 0x00 0. " IRQS288 ,IRQS Status Bit 288" "Low,High" else hgroup.long 0x0D28++0x03 hide.long 0x0 "GICD_SPISR9,Shared Peripheral Interrupt Status Register 9" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0B) rgroup.long 0x0D2C++0x03 line.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10" bitfld.long 0x00 31. " IRQS351 ,IRQS Status Bit 351" "Low,High" bitfld.long 0x00 30. " IRQS350 ,IRQS Status Bit 350" "Low,High" bitfld.long 0x00 29. " IRQS349 ,IRQS Status Bit 349" "Low,High" textline " " bitfld.long 0x00 28. " IRQS348 ,IRQS Status Bit 348" "Low,High" bitfld.long 0x00 27. " IRQS347 ,IRQS Status Bit 347" "Low,High" bitfld.long 0x00 26. " IRQS346 ,IRQS Status Bit 346" "Low,High" textline " " bitfld.long 0x00 25. " IRQS345 ,IRQS Status Bit 345" "Low,High" bitfld.long 0x00 24. " IRQS344 ,IRQS Status Bit 344" "Low,High" bitfld.long 0x00 23. " IRQS343 ,IRQS Status Bit 343" "Low,High" textline " " bitfld.long 0x00 22. " IRQS342 ,IRQS Status Bit 342" "Low,High" bitfld.long 0x00 21. " IRQS341 ,IRQS Status Bit 341" "Low,High" bitfld.long 0x00 20. " IRQS340 ,IRQS Status Bit 340" "Low,High" textline " " bitfld.long 0x00 19. " IRQS339 ,IRQS Status Bit 339" "Low,High" bitfld.long 0x00 18. " IRQS338 ,IRQS Status Bit 338" "Low,High" bitfld.long 0x00 17. " IRQS337 ,IRQS Status Bit 337" "Low,High" textline " " bitfld.long 0x00 16. " IRQS336 ,IRQS Status Bit 336" "Low,High" bitfld.long 0x00 15. " IRQS335 ,IRQS Status Bit 335" "Low,High" bitfld.long 0x00 14. " IRQS334 ,IRQS Status Bit 334" "Low,High" textline " " bitfld.long 0x00 13. " IRQS333 ,IRQS Status Bit 333" "Low,High" bitfld.long 0x00 12. " IRQS332 ,IRQS Status Bit 332" "Low,High" bitfld.long 0x00 11. " IRQS331 ,IRQS Status Bit 331" "Low,High" textline " " bitfld.long 0x00 10. " IRQS330 ,IRQS Status Bit 330" "Low,High" bitfld.long 0x00 9. " IRQS329 ,IRQS Status Bit 329" "Low,High" bitfld.long 0x00 8. " IRQS328 ,IRQS Status Bit 328" "Low,High" textline " " bitfld.long 0x00 7. " IRQS327 ,IRQS Status Bit 327" "Low,High" bitfld.long 0x00 6. " IRQS326 ,IRQS Status Bit 326" "Low,High" bitfld.long 0x00 5. " IRQS325 ,IRQS Status Bit 325" "Low,High" textline " " bitfld.long 0x00 4. " IRQS324 ,IRQS Status Bit 324" "Low,High" bitfld.long 0x00 3. " IRQS323 ,IRQS Status Bit 323" "Low,High" bitfld.long 0x00 2. " IRQS322 ,IRQS Status Bit 322" "Low,High" textline " " bitfld.long 0x00 1. " IRQS321 ,IRQS Status Bit 321" "Low,High" bitfld.long 0x00 0. " IRQS320 ,IRQS Status Bit 320" "Low,High" else hgroup.long 0x0D2C++0x03 hide.long 0x0 "GICD_SPISR10,Shared Peripheral Interrupt Status Register 10" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0C) rgroup.long 0x0D30++0x03 line.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11" bitfld.long 0x00 31. " IRQS383 ,IRQS Status Bit 383" "Low,High" bitfld.long 0x00 30. " IRQS382 ,IRQS Status Bit 382" "Low,High" bitfld.long 0x00 29. " IRQS381 ,IRQS Status Bit 381" "Low,High" textline " " bitfld.long 0x00 28. " IRQS380 ,IRQS Status Bit 380" "Low,High" bitfld.long 0x00 27. " IRQS379 ,IRQS Status Bit 379" "Low,High" bitfld.long 0x00 26. " IRQS378 ,IRQS Status Bit 378" "Low,High" textline " " bitfld.long 0x00 25. " IRQS377 ,IRQS Status Bit 377" "Low,High" bitfld.long 0x00 24. " IRQS376 ,IRQS Status Bit 376" "Low,High" bitfld.long 0x00 23. " IRQS375 ,IRQS Status Bit 375" "Low,High" textline " " bitfld.long 0x00 22. " IRQS374 ,IRQS Status Bit 374" "Low,High" bitfld.long 0x00 21. " IRQS373 ,IRQS Status Bit 373" "Low,High" bitfld.long 0x00 20. " IRQS372 ,IRQS Status Bit 372" "Low,High" textline " " bitfld.long 0x00 19. " IRQS371 ,IRQS Status Bit 371" "Low,High" bitfld.long 0x00 18. " IRQS370 ,IRQS Status Bit 370" "Low,High" bitfld.long 0x00 17. " IRQS369 ,IRQS Status Bit 369" "Low,High" textline " " bitfld.long 0x00 16. " IRQS368 ,IRQS Status Bit 368" "Low,High" bitfld.long 0x00 15. " IRQS367 ,IRQS Status Bit 367" "Low,High" bitfld.long 0x00 14. " IRQS366 ,IRQS Status Bit 366" "Low,High" textline " " bitfld.long 0x00 13. " IRQS365 ,IRQS Status Bit 365" "Low,High" bitfld.long 0x00 12. " IRQS364 ,IRQS Status Bit 364" "Low,High" bitfld.long 0x00 11. " IRQS363 ,IRQS Status Bit 363" "Low,High" textline " " bitfld.long 0x00 10. " IRQS362 ,IRQS Status Bit 362" "Low,High" bitfld.long 0x00 9. " IRQS361 ,IRQS Status Bit 361" "Low,High" bitfld.long 0x00 8. " IRQS360 ,IRQS Status Bit 360" "Low,High" textline " " bitfld.long 0x00 7. " IRQS359 ,IRQS Status Bit 359" "Low,High" bitfld.long 0x00 6. " IRQS358 ,IRQS Status Bit 358" "Low,High" bitfld.long 0x00 5. " IRQS357 ,IRQS Status Bit 357" "Low,High" textline " " bitfld.long 0x00 4. " IRQS356 ,IRQS Status Bit 356" "Low,High" bitfld.long 0x00 3. " IRQS355 ,IRQS Status Bit 355" "Low,High" bitfld.long 0x00 2. " IRQS354 ,IRQS Status Bit 354" "Low,High" textline " " bitfld.long 0x00 1. " IRQS353 ,IRQS Status Bit 353" "Low,High" bitfld.long 0x00 0. " IRQS352 ,IRQS Status Bit 352" "Low,High" else hgroup.long 0x0D30++0x03 hide.long 0x0 "GICD_SPISR11,Shared Peripheral Interrupt Status Register 11" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0D) rgroup.long 0x0D34++0x03 line.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12" bitfld.long 0x00 31. " IRQS415 ,IRQS Status Bit 415" "Low,High" bitfld.long 0x00 30. " IRQS414 ,IRQS Status Bit 414" "Low,High" bitfld.long 0x00 29. " IRQS413 ,IRQS Status Bit 413" "Low,High" textline " " bitfld.long 0x00 28. " IRQS412 ,IRQS Status Bit 412" "Low,High" bitfld.long 0x00 27. " IRQS411 ,IRQS Status Bit 411" "Low,High" bitfld.long 0x00 26. " IRQS410 ,IRQS Status Bit 410" "Low,High" textline " " bitfld.long 0x00 25. " IRQS409 ,IRQS Status Bit 409" "Low,High" bitfld.long 0x00 24. " IRQS408 ,IRQS Status Bit 408" "Low,High" bitfld.long 0x00 23. " IRQS407 ,IRQS Status Bit 407" "Low,High" textline " " bitfld.long 0x00 22. " IRQS406 ,IRQS Status Bit 406" "Low,High" bitfld.long 0x00 21. " IRQS405 ,IRQS Status Bit 405" "Low,High" bitfld.long 0x00 20. " IRQS404 ,IRQS Status Bit 404" "Low,High" textline " " bitfld.long 0x00 19. " IRQS403 ,IRQS Status Bit 403" "Low,High" bitfld.long 0x00 18. " IRQS402 ,IRQS Status Bit 402" "Low,High" bitfld.long 0x00 17. " IRQS401 ,IRQS Status Bit 401" "Low,High" textline " " bitfld.long 0x00 16. " IRQS400 ,IRQS Status Bit 400" "Low,High" bitfld.long 0x00 15. " IRQS399 ,IRQS Status Bit 399" "Low,High" bitfld.long 0x00 14. " IRQS398 ,IRQS Status Bit 398" "Low,High" textline " " bitfld.long 0x00 13. " IRQS397 ,IRQS Status Bit 397" "Low,High" bitfld.long 0x00 12. " IRQS396 ,IRQS Status Bit 396" "Low,High" bitfld.long 0x00 11. " IRQS395 ,IRQS Status Bit 395" "Low,High" textline " " bitfld.long 0x00 10. " IRQS394 ,IRQS Status Bit 394" "Low,High" bitfld.long 0x00 9. " IRQS393 ,IRQS Status Bit 393" "Low,High" bitfld.long 0x00 8. " IRQS392 ,IRQS Status Bit 392" "Low,High" textline " " bitfld.long 0x00 7. " IRQS391 ,IRQS Status Bit 391" "Low,High" bitfld.long 0x00 6. " IRQS390 ,IRQS Status Bit 390" "Low,High" bitfld.long 0x00 5. " IRQS389 ,IRQS Status Bit 389" "Low,High" textline " " bitfld.long 0x00 4. " IRQS388 ,IRQS Status Bit 388" "Low,High" bitfld.long 0x00 3. " IRQS387 ,IRQS Status Bit 387" "Low,High" bitfld.long 0x00 2. " IRQS386 ,IRQS Status Bit 386" "Low,High" textline " " bitfld.long 0x00 1. " IRQS385 ,IRQS Status Bit 385" "Low,High" bitfld.long 0x00 0. " IRQS384 ,IRQS Status Bit 384" "Low,High" else hgroup.long 0x0D34++0x03 hide.long 0x0 "GICD_SPISR12,Shared Peripheral Interrupt Status Register 12" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0E) rgroup.long 0x0D38++0x03 line.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13" bitfld.long 0x00 31. " IRQS447 ,IRQS Status Bit 447" "Low,High" bitfld.long 0x00 30. " IRQS446 ,IRQS Status Bit 446" "Low,High" bitfld.long 0x00 29. " IRQS445 ,IRQS Status Bit 445" "Low,High" textline " " bitfld.long 0x00 28. " IRQS444 ,IRQS Status Bit 444" "Low,High" bitfld.long 0x00 27. " IRQS443 ,IRQS Status Bit 443" "Low,High" bitfld.long 0x00 26. " IRQS442 ,IRQS Status Bit 442" "Low,High" textline " " bitfld.long 0x00 25. " IRQS441 ,IRQS Status Bit 441" "Low,High" bitfld.long 0x00 24. " IRQS440 ,IRQS Status Bit 440" "Low,High" bitfld.long 0x00 23. " IRQS439 ,IRQS Status Bit 439" "Low,High" textline " " bitfld.long 0x00 22. " IRQS438 ,IRQS Status Bit 438" "Low,High" bitfld.long 0x00 21. " IRQS437 ,IRQS Status Bit 437" "Low,High" bitfld.long 0x00 20. " IRQS436 ,IRQS Status Bit 436" "Low,High" textline " " bitfld.long 0x00 19. " IRQS435 ,IRQS Status Bit 435" "Low,High" bitfld.long 0x00 18. " IRQS434 ,IRQS Status Bit 434" "Low,High" bitfld.long 0x00 17. " IRQS433 ,IRQS Status Bit 433" "Low,High" textline " " bitfld.long 0x00 16. " IRQS432 ,IRQS Status Bit 432" "Low,High" bitfld.long 0x00 15. " IRQS431 ,IRQS Status Bit 431" "Low,High" bitfld.long 0x00 14. " IRQS430 ,IRQS Status Bit 430" "Low,High" textline " " bitfld.long 0x00 13. " IRQS429 ,IRQS Status Bit 429" "Low,High" bitfld.long 0x00 12. " IRQS428 ,IRQS Status Bit 428" "Low,High" bitfld.long 0x00 11. " IRQS427 ,IRQS Status Bit 427" "Low,High" textline " " bitfld.long 0x00 10. " IRQS426 ,IRQS Status Bit 426" "Low,High" bitfld.long 0x00 9. " IRQS425 ,IRQS Status Bit 425" "Low,High" bitfld.long 0x00 8. " IRQS424 ,IRQS Status Bit 424" "Low,High" textline " " bitfld.long 0x00 7. " IRQS423 ,IRQS Status Bit 423" "Low,High" bitfld.long 0x00 6. " IRQS422 ,IRQS Status Bit 422" "Low,High" bitfld.long 0x00 5. " IRQS421 ,IRQS Status Bit 421" "Low,High" textline " " bitfld.long 0x00 4. " IRQS420 ,IRQS Status Bit 420" "Low,High" bitfld.long 0x00 3. " IRQS419 ,IRQS Status Bit 419" "Low,High" bitfld.long 0x00 2. " IRQS418 ,IRQS Status Bit 418" "Low,High" textline " " bitfld.long 0x00 1. " IRQS417 ,IRQS Status Bit 417" "Low,High" bitfld.long 0x00 0. " IRQS416 ,IRQS Status Bit 416" "Low,High" else hgroup.long 0x0D38++0x03 hide.long 0x0 "GICD_SPISR13,Shared Peripheral Interrupt Status Register 13" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x0F) rgroup.long 0x0D3C++0x03 line.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14" bitfld.long 0x00 31. " IRQS479 ,IRQS Status Bit 479" "Low,High" bitfld.long 0x00 30. " IRQS478 ,IRQS Status Bit 478" "Low,High" bitfld.long 0x00 29. " IRQS477 ,IRQS Status Bit 477" "Low,High" textline " " bitfld.long 0x00 28. " IRQS476 ,IRQS Status Bit 476" "Low,High" bitfld.long 0x00 27. " IRQS475 ,IRQS Status Bit 475" "Low,High" bitfld.long 0x00 26. " IRQS474 ,IRQS Status Bit 474" "Low,High" textline " " bitfld.long 0x00 25. " IRQS473 ,IRQS Status Bit 473" "Low,High" bitfld.long 0x00 24. " IRQS472 ,IRQS Status Bit 472" "Low,High" bitfld.long 0x00 23. " IRQS471 ,IRQS Status Bit 471" "Low,High" textline " " bitfld.long 0x00 22. " IRQS470 ,IRQS Status Bit 470" "Low,High" bitfld.long 0x00 21. " IRQS469 ,IRQS Status Bit 469" "Low,High" bitfld.long 0x00 20. " IRQS468 ,IRQS Status Bit 468" "Low,High" textline " " bitfld.long 0x00 19. " IRQS467 ,IRQS Status Bit 467" "Low,High" bitfld.long 0x00 18. " IRQS466 ,IRQS Status Bit 466" "Low,High" bitfld.long 0x00 17. " IRQS465 ,IRQS Status Bit 465" "Low,High" textline " " bitfld.long 0x00 16. " IRQS464 ,IRQS Status Bit 464" "Low,High" bitfld.long 0x00 15. " IRQS463 ,IRQS Status Bit 463" "Low,High" bitfld.long 0x00 14. " IRQS462 ,IRQS Status Bit 462" "Low,High" textline " " bitfld.long 0x00 13. " IRQS461 ,IRQS Status Bit 461" "Low,High" bitfld.long 0x00 12. " IRQS460 ,IRQS Status Bit 460" "Low,High" bitfld.long 0x00 11. " IRQS459 ,IRQS Status Bit 459" "Low,High" textline " " bitfld.long 0x00 10. " IRQS458 ,IRQS Status Bit 458" "Low,High" bitfld.long 0x00 9. " IRQS457 ,IRQS Status Bit 457" "Low,High" bitfld.long 0x00 8. " IRQS456 ,IRQS Status Bit 456" "Low,High" textline " " bitfld.long 0x00 7. " IRQS455 ,IRQS Status Bit 455" "Low,High" bitfld.long 0x00 6. " IRQS454 ,IRQS Status Bit 454" "Low,High" bitfld.long 0x00 5. " IRQS453 ,IRQS Status Bit 453" "Low,High" textline " " bitfld.long 0x00 4. " IRQS452 ,IRQS Status Bit 452" "Low,High" bitfld.long 0x00 3. " IRQS451 ,IRQS Status Bit 451" "Low,High" bitfld.long 0x00 2. " IRQS450 ,IRQS Status Bit 450" "Low,High" textline " " bitfld.long 0x00 1. " IRQS449 ,IRQS Status Bit 449" "Low,High" bitfld.long 0x00 0. " IRQS448 ,IRQS Status Bit 448" "Low,High" else hgroup.long 0x0D3C++0x03 hide.long 0x0 "GICD_SPISR14,Shared Peripheral Interrupt Status Register 14" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x10) rgroup.long 0x0D40++0x03 line.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15" bitfld.long 0x00 31. " IRQS511 ,IRQS Status Bit 511" "Low,High" bitfld.long 0x00 30. " IRQS510 ,IRQS Status Bit 510" "Low,High" bitfld.long 0x00 29. " IRQS509 ,IRQS Status Bit 509" "Low,High" textline " " bitfld.long 0x00 28. " IRQS508 ,IRQS Status Bit 508" "Low,High" bitfld.long 0x00 27. " IRQS507 ,IRQS Status Bit 507" "Low,High" bitfld.long 0x00 26. " IRQS506 ,IRQS Status Bit 506" "Low,High" textline " " bitfld.long 0x00 25. " IRQS505 ,IRQS Status Bit 505" "Low,High" bitfld.long 0x00 24. " IRQS504 ,IRQS Status Bit 504" "Low,High" bitfld.long 0x00 23. " IRQS503 ,IRQS Status Bit 503" "Low,High" textline " " bitfld.long 0x00 22. " IRQS502 ,IRQS Status Bit 502" "Low,High" bitfld.long 0x00 21. " IRQS501 ,IRQS Status Bit 501" "Low,High" bitfld.long 0x00 20. " IRQS500 ,IRQS Status Bit 500" "Low,High" textline " " bitfld.long 0x00 19. " IRQS499 ,IRQS Status Bit 499" "Low,High" bitfld.long 0x00 18. " IRQS498 ,IRQS Status Bit 498" "Low,High" bitfld.long 0x00 17. " IRQS497 ,IRQS Status Bit 497" "Low,High" textline " " bitfld.long 0x00 16. " IRQS496 ,IRQS Status Bit 496" "Low,High" bitfld.long 0x00 15. " IRQS495 ,IRQS Status Bit 495" "Low,High" bitfld.long 0x00 14. " IRQS494 ,IRQS Status Bit 494" "Low,High" textline " " bitfld.long 0x00 13. " IRQS493 ,IRQS Status Bit 493" "Low,High" bitfld.long 0x00 12. " IRQS492 ,IRQS Status Bit 492" "Low,High" bitfld.long 0x00 11. " IRQS491 ,IRQS Status Bit 491" "Low,High" textline " " bitfld.long 0x00 10. " IRQS490 ,IRQS Status Bit 490" "Low,High" bitfld.long 0x00 9. " IRQS489 ,IRQS Status Bit 489" "Low,High" bitfld.long 0x00 8. " IRQS488 ,IRQS Status Bit 488" "Low,High" textline " " bitfld.long 0x00 7. " IRQS487 ,IRQS Status Bit 487" "Low,High" bitfld.long 0x00 6. " IRQS486 ,IRQS Status Bit 486" "Low,High" bitfld.long 0x00 5. " IRQS485 ,IRQS Status Bit 485" "Low,High" textline " " bitfld.long 0x00 4. " IRQS484 ,IRQS Status Bit 484" "Low,High" bitfld.long 0x00 3. " IRQS483 ,IRQS Status Bit 483" "Low,High" bitfld.long 0x00 2. " IRQS482 ,IRQS Status Bit 482" "Low,High" textline " " bitfld.long 0x00 1. " IRQS481 ,IRQS Status Bit 481" "Low,High" bitfld.long 0x00 0. " IRQS480 ,IRQS Status Bit 480" "Low,High" else hgroup.long 0x0D40++0x03 hide.long 0x0 "GICD_SPISR15,Shared Peripheral Interrupt Status Register 15" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x11) rgroup.long 0x0D44++0x03 line.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16" bitfld.long 0x00 31. " IRQS543 ,IRQS Status Bit 543" "Low,High" bitfld.long 0x00 30. " IRQS542 ,IRQS Status Bit 542" "Low,High" bitfld.long 0x00 29. " IRQS541 ,IRQS Status Bit 541" "Low,High" textline " " bitfld.long 0x00 28. " IRQS540 ,IRQS Status Bit 540" "Low,High" bitfld.long 0x00 27. " IRQS539 ,IRQS Status Bit 539" "Low,High" bitfld.long 0x00 26. " IRQS538 ,IRQS Status Bit 538" "Low,High" textline " " bitfld.long 0x00 25. " IRQS537 ,IRQS Status Bit 537" "Low,High" bitfld.long 0x00 24. " IRQS536 ,IRQS Status Bit 536" "Low,High" bitfld.long 0x00 23. " IRQS535 ,IRQS Status Bit 535" "Low,High" textline " " bitfld.long 0x00 22. " IRQS534 ,IRQS Status Bit 534" "Low,High" bitfld.long 0x00 21. " IRQS533 ,IRQS Status Bit 533" "Low,High" bitfld.long 0x00 20. " IRQS532 ,IRQS Status Bit 532" "Low,High" textline " " bitfld.long 0x00 19. " IRQS531 ,IRQS Status Bit 531" "Low,High" bitfld.long 0x00 18. " IRQS530 ,IRQS Status Bit 530" "Low,High" bitfld.long 0x00 17. " IRQS529 ,IRQS Status Bit 529" "Low,High" textline " " bitfld.long 0x00 16. " IRQS528 ,IRQS Status Bit 528" "Low,High" bitfld.long 0x00 15. " IRQS527 ,IRQS Status Bit 527" "Low,High" bitfld.long 0x00 14. " IRQS526 ,IRQS Status Bit 526" "Low,High" textline " " bitfld.long 0x00 13. " IRQS525 ,IRQS Status Bit 525" "Low,High" bitfld.long 0x00 12. " IRQS524 ,IRQS Status Bit 524" "Low,High" bitfld.long 0x00 11. " IRQS523 ,IRQS Status Bit 523" "Low,High" textline " " bitfld.long 0x00 10. " IRQS522 ,IRQS Status Bit 522" "Low,High" bitfld.long 0x00 9. " IRQS521 ,IRQS Status Bit 521" "Low,High" bitfld.long 0x00 8. " IRQS520 ,IRQS Status Bit 520" "Low,High" textline " " bitfld.long 0x00 7. " IRQS519 ,IRQS Status Bit 519" "Low,High" bitfld.long 0x00 6. " IRQS518 ,IRQS Status Bit 518" "Low,High" bitfld.long 0x00 5. " IRQS517 ,IRQS Status Bit 517" "Low,High" textline " " bitfld.long 0x00 4. " IRQS516 ,IRQS Status Bit 516" "Low,High" bitfld.long 0x00 3. " IRQS515 ,IRQS Status Bit 515" "Low,High" bitfld.long 0x00 2. " IRQS514 ,IRQS Status Bit 514" "Low,High" textline " " bitfld.long 0x00 1. " IRQS513 ,IRQS Status Bit 513" "Low,High" bitfld.long 0x00 0. " IRQS512 ,IRQS Status Bit 512" "Low,High" else hgroup.long 0x0D44++0x03 hide.long 0x0 "GICD_SPISR16,Shared Peripheral Interrupt Status Register 16" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x12) rgroup.long 0x0D48++0x03 line.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17" bitfld.long 0x00 31. " IRQS575 ,IRQS Status Bit 575" "Low,High" bitfld.long 0x00 30. " IRQS574 ,IRQS Status Bit 574" "Low,High" bitfld.long 0x00 29. " IRQS573 ,IRQS Status Bit 573" "Low,High" textline " " bitfld.long 0x00 28. " IRQS572 ,IRQS Status Bit 572" "Low,High" bitfld.long 0x00 27. " IRQS571 ,IRQS Status Bit 571" "Low,High" bitfld.long 0x00 26. " IRQS570 ,IRQS Status Bit 570" "Low,High" textline " " bitfld.long 0x00 25. " IRQS569 ,IRQS Status Bit 569" "Low,High" bitfld.long 0x00 24. " IRQS568 ,IRQS Status Bit 568" "Low,High" bitfld.long 0x00 23. " IRQS567 ,IRQS Status Bit 567" "Low,High" textline " " bitfld.long 0x00 22. " IRQS566 ,IRQS Status Bit 566" "Low,High" bitfld.long 0x00 21. " IRQS565 ,IRQS Status Bit 565" "Low,High" bitfld.long 0x00 20. " IRQS564 ,IRQS Status Bit 564" "Low,High" textline " " bitfld.long 0x00 19. " IRQS563 ,IRQS Status Bit 563" "Low,High" bitfld.long 0x00 18. " IRQS562 ,IRQS Status Bit 562" "Low,High" bitfld.long 0x00 17. " IRQS561 ,IRQS Status Bit 561" "Low,High" textline " " bitfld.long 0x00 16. " IRQS560 ,IRQS Status Bit 560" "Low,High" bitfld.long 0x00 15. " IRQS559 ,IRQS Status Bit 559" "Low,High" bitfld.long 0x00 14. " IRQS558 ,IRQS Status Bit 558" "Low,High" textline " " bitfld.long 0x00 13. " IRQS557 ,IRQS Status Bit 557" "Low,High" bitfld.long 0x00 12. " IRQS556 ,IRQS Status Bit 556" "Low,High" bitfld.long 0x00 11. " IRQS555 ,IRQS Status Bit 555" "Low,High" textline " " bitfld.long 0x00 10. " IRQS554 ,IRQS Status Bit 554" "Low,High" bitfld.long 0x00 9. " IRQS553 ,IRQS Status Bit 553" "Low,High" bitfld.long 0x00 8. " IRQS552 ,IRQS Status Bit 552" "Low,High" textline " " bitfld.long 0x00 7. " IRQS551 ,IRQS Status Bit 551" "Low,High" bitfld.long 0x00 6. " IRQS550 ,IRQS Status Bit 550" "Low,High" bitfld.long 0x00 5. " IRQS549 ,IRQS Status Bit 549" "Low,High" textline " " bitfld.long 0x00 4. " IRQS548 ,IRQS Status Bit 548" "Low,High" bitfld.long 0x00 3. " IRQS547 ,IRQS Status Bit 547" "Low,High" bitfld.long 0x00 2. " IRQS546 ,IRQS Status Bit 546" "Low,High" textline " " bitfld.long 0x00 1. " IRQS545 ,IRQS Status Bit 545" "Low,High" bitfld.long 0x00 0. " IRQS544 ,IRQS Status Bit 544" "Low,High" else hgroup.long 0x0D48++0x03 hide.long 0x0 "GICD_SPISR17,Shared Peripheral Interrupt Status Register 17" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x13) rgroup.long 0x0D4C++0x03 line.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18" bitfld.long 0x00 31. " IRQS607 ,IRQS Status Bit 607" "Low,High" bitfld.long 0x00 30. " IRQS606 ,IRQS Status Bit 606" "Low,High" bitfld.long 0x00 29. " IRQS605 ,IRQS Status Bit 605" "Low,High" textline " " bitfld.long 0x00 28. " IRQS604 ,IRQS Status Bit 604" "Low,High" bitfld.long 0x00 27. " IRQS603 ,IRQS Status Bit 603" "Low,High" bitfld.long 0x00 26. " IRQS602 ,IRQS Status Bit 602" "Low,High" textline " " bitfld.long 0x00 25. " IRQS601 ,IRQS Status Bit 601" "Low,High" bitfld.long 0x00 24. " IRQS600 ,IRQS Status Bit 600" "Low,High" bitfld.long 0x00 23. " IRQS599 ,IRQS Status Bit 599" "Low,High" textline " " bitfld.long 0x00 22. " IRQS598 ,IRQS Status Bit 598" "Low,High" bitfld.long 0x00 21. " IRQS597 ,IRQS Status Bit 597" "Low,High" bitfld.long 0x00 20. " IRQS596 ,IRQS Status Bit 596" "Low,High" textline " " bitfld.long 0x00 19. " IRQS595 ,IRQS Status Bit 595" "Low,High" bitfld.long 0x00 18. " IRQS594 ,IRQS Status Bit 594" "Low,High" bitfld.long 0x00 17. " IRQS593 ,IRQS Status Bit 593" "Low,High" textline " " bitfld.long 0x00 16. " IRQS592 ,IRQS Status Bit 592" "Low,High" bitfld.long 0x00 15. " IRQS591 ,IRQS Status Bit 591" "Low,High" bitfld.long 0x00 14. " IRQS590 ,IRQS Status Bit 590" "Low,High" textline " " bitfld.long 0x00 13. " IRQS589 ,IRQS Status Bit 589" "Low,High" bitfld.long 0x00 12. " IRQS588 ,IRQS Status Bit 588" "Low,High" bitfld.long 0x00 11. " IRQS587 ,IRQS Status Bit 587" "Low,High" textline " " bitfld.long 0x00 10. " IRQS586 ,IRQS Status Bit 586" "Low,High" bitfld.long 0x00 9. " IRQS585 ,IRQS Status Bit 585" "Low,High" bitfld.long 0x00 8. " IRQS584 ,IRQS Status Bit 584" "Low,High" textline " " bitfld.long 0x00 7. " IRQS583 ,IRQS Status Bit 583" "Low,High" bitfld.long 0x00 6. " IRQS582 ,IRQS Status Bit 582" "Low,High" bitfld.long 0x00 5. " IRQS581 ,IRQS Status Bit 581" "Low,High" textline " " bitfld.long 0x00 4. " IRQS580 ,IRQS Status Bit 580" "Low,High" bitfld.long 0x00 3. " IRQS579 ,IRQS Status Bit 579" "Low,High" bitfld.long 0x00 2. " IRQS578 ,IRQS Status Bit 578" "Low,High" textline " " bitfld.long 0x00 1. " IRQS577 ,IRQS Status Bit 577" "Low,High" bitfld.long 0x00 0. " IRQS576 ,IRQS Status Bit 576" "Low,High" else hgroup.long 0x0D4C++0x03 hide.long 0x0 "GICD_SPISR18,Shared Peripheral Interrupt Status Register 18" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x14) rgroup.long 0x0D50++0x03 line.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19" bitfld.long 0x00 31. " IRQS639 ,IRQS Status Bit 639" "Low,High" bitfld.long 0x00 30. " IRQS638 ,IRQS Status Bit 638" "Low,High" bitfld.long 0x00 29. " IRQS637 ,IRQS Status Bit 637" "Low,High" textline " " bitfld.long 0x00 28. " IRQS636 ,IRQS Status Bit 636" "Low,High" bitfld.long 0x00 27. " IRQS635 ,IRQS Status Bit 635" "Low,High" bitfld.long 0x00 26. " IRQS634 ,IRQS Status Bit 634" "Low,High" textline " " bitfld.long 0x00 25. " IRQS633 ,IRQS Status Bit 633" "Low,High" bitfld.long 0x00 24. " IRQS632 ,IRQS Status Bit 632" "Low,High" bitfld.long 0x00 23. " IRQS631 ,IRQS Status Bit 631" "Low,High" textline " " bitfld.long 0x00 22. " IRQS630 ,IRQS Status Bit 630" "Low,High" bitfld.long 0x00 21. " IRQS629 ,IRQS Status Bit 629" "Low,High" bitfld.long 0x00 20. " IRQS628 ,IRQS Status Bit 628" "Low,High" textline " " bitfld.long 0x00 19. " IRQS627 ,IRQS Status Bit 627" "Low,High" bitfld.long 0x00 18. " IRQS626 ,IRQS Status Bit 626" "Low,High" bitfld.long 0x00 17. " IRQS625 ,IRQS Status Bit 625" "Low,High" textline " " bitfld.long 0x00 16. " IRQS624 ,IRQS Status Bit 624" "Low,High" bitfld.long 0x00 15. " IRQS623 ,IRQS Status Bit 623" "Low,High" bitfld.long 0x00 14. " IRQS622 ,IRQS Status Bit 622" "Low,High" textline " " bitfld.long 0x00 13. " IRQS621 ,IRQS Status Bit 621" "Low,High" bitfld.long 0x00 12. " IRQS620 ,IRQS Status Bit 620" "Low,High" bitfld.long 0x00 11. " IRQS619 ,IRQS Status Bit 619" "Low,High" textline " " bitfld.long 0x00 10. " IRQS618 ,IRQS Status Bit 618" "Low,High" bitfld.long 0x00 9. " IRQS617 ,IRQS Status Bit 617" "Low,High" bitfld.long 0x00 8. " IRQS616 ,IRQS Status Bit 616" "Low,High" textline " " bitfld.long 0x00 7. " IRQS615 ,IRQS Status Bit 615" "Low,High" bitfld.long 0x00 6. " IRQS614 ,IRQS Status Bit 614" "Low,High" bitfld.long 0x00 5. " IRQS613 ,IRQS Status Bit 613" "Low,High" textline " " bitfld.long 0x00 4. " IRQS612 ,IRQS Status Bit 612" "Low,High" bitfld.long 0x00 3. " IRQS611 ,IRQS Status Bit 611" "Low,High" bitfld.long 0x00 2. " IRQS610 ,IRQS Status Bit 610" "Low,High" textline " " bitfld.long 0x00 1. " IRQS609 ,IRQS Status Bit 609" "Low,High" bitfld.long 0x00 0. " IRQS608 ,IRQS Status Bit 608" "Low,High" else hgroup.long 0x0D50++0x03 hide.long 0x0 "GICD_SPISR19,Shared Peripheral Interrupt Status Register 19" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x15) rgroup.long 0x0D54++0x03 line.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20" bitfld.long 0x00 31. " IRQS671 ,IRQS Status Bit 671" "Low,High" bitfld.long 0x00 30. " IRQS670 ,IRQS Status Bit 670" "Low,High" bitfld.long 0x00 29. " IRQS669 ,IRQS Status Bit 669" "Low,High" textline " " bitfld.long 0x00 28. " IRQS668 ,IRQS Status Bit 668" "Low,High" bitfld.long 0x00 27. " IRQS667 ,IRQS Status Bit 667" "Low,High" bitfld.long 0x00 26. " IRQS666 ,IRQS Status Bit 666" "Low,High" textline " " bitfld.long 0x00 25. " IRQS665 ,IRQS Status Bit 665" "Low,High" bitfld.long 0x00 24. " IRQS664 ,IRQS Status Bit 664" "Low,High" bitfld.long 0x00 23. " IRQS663 ,IRQS Status Bit 663" "Low,High" textline " " bitfld.long 0x00 22. " IRQS662 ,IRQS Status Bit 662" "Low,High" bitfld.long 0x00 21. " IRQS661 ,IRQS Status Bit 661" "Low,High" bitfld.long 0x00 20. " IRQS660 ,IRQS Status Bit 660" "Low,High" textline " " bitfld.long 0x00 19. " IRQS659 ,IRQS Status Bit 659" "Low,High" bitfld.long 0x00 18. " IRQS658 ,IRQS Status Bit 658" "Low,High" bitfld.long 0x00 17. " IRQS657 ,IRQS Status Bit 657" "Low,High" textline " " bitfld.long 0x00 16. " IRQS656 ,IRQS Status Bit 656" "Low,High" bitfld.long 0x00 15. " IRQS655 ,IRQS Status Bit 655" "Low,High" bitfld.long 0x00 14. " IRQS654 ,IRQS Status Bit 654" "Low,High" textline " " bitfld.long 0x00 13. " IRQS653 ,IRQS Status Bit 653" "Low,High" bitfld.long 0x00 12. " IRQS652 ,IRQS Status Bit 652" "Low,High" bitfld.long 0x00 11. " IRQS651 ,IRQS Status Bit 651" "Low,High" textline " " bitfld.long 0x00 10. " IRQS650 ,IRQS Status Bit 650" "Low,High" bitfld.long 0x00 9. " IRQS649 ,IRQS Status Bit 649" "Low,High" bitfld.long 0x00 8. " IRQS648 ,IRQS Status Bit 648" "Low,High" textline " " bitfld.long 0x00 7. " IRQS647 ,IRQS Status Bit 647" "Low,High" bitfld.long 0x00 6. " IRQS646 ,IRQS Status Bit 646" "Low,High" bitfld.long 0x00 5. " IRQS645 ,IRQS Status Bit 645" "Low,High" textline " " bitfld.long 0x00 4. " IRQS644 ,IRQS Status Bit 644" "Low,High" bitfld.long 0x00 3. " IRQS643 ,IRQS Status Bit 643" "Low,High" bitfld.long 0x00 2. " IRQS642 ,IRQS Status Bit 642" "Low,High" textline " " bitfld.long 0x00 1. " IRQS641 ,IRQS Status Bit 641" "Low,High" bitfld.long 0x00 0. " IRQS640 ,IRQS Status Bit 640" "Low,High" else hgroup.long 0x0D54++0x03 hide.long 0x0 "GICD_SPISR20,Shared Peripheral Interrupt Status Register 20" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x16) rgroup.long 0x0D58++0x03 line.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21" bitfld.long 0x00 31. " IRQS703 ,IRQS Status Bit 703" "Low,High" bitfld.long 0x00 30. " IRQS702 ,IRQS Status Bit 702" "Low,High" bitfld.long 0x00 29. " IRQS701 ,IRQS Status Bit 701" "Low,High" textline " " bitfld.long 0x00 28. " IRQS700 ,IRQS Status Bit 700" "Low,High" bitfld.long 0x00 27. " IRQS699 ,IRQS Status Bit 699" "Low,High" bitfld.long 0x00 26. " IRQS698 ,IRQS Status Bit 698" "Low,High" textline " " bitfld.long 0x00 25. " IRQS697 ,IRQS Status Bit 697" "Low,High" bitfld.long 0x00 24. " IRQS696 ,IRQS Status Bit 696" "Low,High" bitfld.long 0x00 23. " IRQS695 ,IRQS Status Bit 695" "Low,High" textline " " bitfld.long 0x00 22. " IRQS694 ,IRQS Status Bit 694" "Low,High" bitfld.long 0x00 21. " IRQS693 ,IRQS Status Bit 693" "Low,High" bitfld.long 0x00 20. " IRQS692 ,IRQS Status Bit 692" "Low,High" textline " " bitfld.long 0x00 19. " IRQS691 ,IRQS Status Bit 691" "Low,High" bitfld.long 0x00 18. " IRQS690 ,IRQS Status Bit 690" "Low,High" bitfld.long 0x00 17. " IRQS689 ,IRQS Status Bit 689" "Low,High" textline " " bitfld.long 0x00 16. " IRQS688 ,IRQS Status Bit 688" "Low,High" bitfld.long 0x00 15. " IRQS687 ,IRQS Status Bit 687" "Low,High" bitfld.long 0x00 14. " IRQS686 ,IRQS Status Bit 686" "Low,High" textline " " bitfld.long 0x00 13. " IRQS685 ,IRQS Status Bit 685" "Low,High" bitfld.long 0x00 12. " IRQS684 ,IRQS Status Bit 684" "Low,High" bitfld.long 0x00 11. " IRQS683 ,IRQS Status Bit 683" "Low,High" textline " " bitfld.long 0x00 10. " IRQS682 ,IRQS Status Bit 682" "Low,High" bitfld.long 0x00 9. " IRQS681 ,IRQS Status Bit 681" "Low,High" bitfld.long 0x00 8. " IRQS680 ,IRQS Status Bit 680" "Low,High" textline " " bitfld.long 0x00 7. " IRQS679 ,IRQS Status Bit 679" "Low,High" bitfld.long 0x00 6. " IRQS678 ,IRQS Status Bit 678" "Low,High" bitfld.long 0x00 5. " IRQS677 ,IRQS Status Bit 677" "Low,High" textline " " bitfld.long 0x00 4. " IRQS676 ,IRQS Status Bit 676" "Low,High" bitfld.long 0x00 3. " IRQS675 ,IRQS Status Bit 675" "Low,High" bitfld.long 0x00 2. " IRQS674 ,IRQS Status Bit 674" "Low,High" textline " " bitfld.long 0x00 1. " IRQS673 ,IRQS Status Bit 673" "Low,High" bitfld.long 0x00 0. " IRQS672 ,IRQS Status Bit 672" "Low,High" else hgroup.long 0x0D58++0x03 hide.long 0x0 "GICD_SPISR21,Shared Peripheral Interrupt Status Register 21" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x17) rgroup.long 0x0D5C++0x03 line.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22" bitfld.long 0x00 31. " IRQS735 ,IRQS Status Bit 735" "Low,High" bitfld.long 0x00 30. " IRQS734 ,IRQS Status Bit 734" "Low,High" bitfld.long 0x00 29. " IRQS733 ,IRQS Status Bit 733" "Low,High" textline " " bitfld.long 0x00 28. " IRQS732 ,IRQS Status Bit 732" "Low,High" bitfld.long 0x00 27. " IRQS731 ,IRQS Status Bit 731" "Low,High" bitfld.long 0x00 26. " IRQS730 ,IRQS Status Bit 730" "Low,High" textline " " bitfld.long 0x00 25. " IRQS729 ,IRQS Status Bit 729" "Low,High" bitfld.long 0x00 24. " IRQS728 ,IRQS Status Bit 728" "Low,High" bitfld.long 0x00 23. " IRQS727 ,IRQS Status Bit 727" "Low,High" textline " " bitfld.long 0x00 22. " IRQS726 ,IRQS Status Bit 726" "Low,High" bitfld.long 0x00 21. " IRQS725 ,IRQS Status Bit 725" "Low,High" bitfld.long 0x00 20. " IRQS724 ,IRQS Status Bit 724" "Low,High" textline " " bitfld.long 0x00 19. " IRQS723 ,IRQS Status Bit 723" "Low,High" bitfld.long 0x00 18. " IRQS722 ,IRQS Status Bit 722" "Low,High" bitfld.long 0x00 17. " IRQS721 ,IRQS Status Bit 721" "Low,High" textline " " bitfld.long 0x00 16. " IRQS720 ,IRQS Status Bit 720" "Low,High" bitfld.long 0x00 15. " IRQS719 ,IRQS Status Bit 719" "Low,High" bitfld.long 0x00 14. " IRQS718 ,IRQS Status Bit 718" "Low,High" textline " " bitfld.long 0x00 13. " IRQS717 ,IRQS Status Bit 717" "Low,High" bitfld.long 0x00 12. " IRQS716 ,IRQS Status Bit 716" "Low,High" bitfld.long 0x00 11. " IRQS715 ,IRQS Status Bit 715" "Low,High" textline " " bitfld.long 0x00 10. " IRQS714 ,IRQS Status Bit 714" "Low,High" bitfld.long 0x00 9. " IRQS713 ,IRQS Status Bit 713" "Low,High" bitfld.long 0x00 8. " IRQS712 ,IRQS Status Bit 712" "Low,High" textline " " bitfld.long 0x00 7. " IRQS711 ,IRQS Status Bit 711" "Low,High" bitfld.long 0x00 6. " IRQS710 ,IRQS Status Bit 710" "Low,High" bitfld.long 0x00 5. " IRQS709 ,IRQS Status Bit 709" "Low,High" textline " " bitfld.long 0x00 4. " IRQS708 ,IRQS Status Bit 708" "Low,High" bitfld.long 0x00 3. " IRQS707 ,IRQS Status Bit 707" "Low,High" bitfld.long 0x00 2. " IRQS706 ,IRQS Status Bit 706" "Low,High" textline " " bitfld.long 0x00 1. " IRQS705 ,IRQS Status Bit 705" "Low,High" bitfld.long 0x00 0. " IRQS704 ,IRQS Status Bit 704" "Low,High" else hgroup.long 0x0D5C++0x03 hide.long 0x0 "GICD_SPISR22,Shared Peripheral Interrupt Status Register 22" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x18) rgroup.long 0x060++0x03 line.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23" bitfld.long 0x00 31. " IRQS767 ,IRQS Status Bit 767" "Low,High" bitfld.long 0x00 30. " IRQS766 ,IRQS Status Bit 766" "Low,High" bitfld.long 0x00 29. " IRQS765 ,IRQS Status Bit 765" "Low,High" textline " " bitfld.long 0x00 28. " IRQS764 ,IRQS Status Bit 764" "Low,High" bitfld.long 0x00 27. " IRQS763 ,IRQS Status Bit 763" "Low,High" bitfld.long 0x00 26. " IRQS762 ,IRQS Status Bit 762" "Low,High" textline " " bitfld.long 0x00 25. " IRQS761 ,IRQS Status Bit 761" "Low,High" bitfld.long 0x00 24. " IRQS760 ,IRQS Status Bit 760" "Low,High" bitfld.long 0x00 23. " IRQS759 ,IRQS Status Bit 759" "Low,High" textline " " bitfld.long 0x00 22. " IRQS758 ,IRQS Status Bit 758" "Low,High" bitfld.long 0x00 21. " IRQS757 ,IRQS Status Bit 757" "Low,High" bitfld.long 0x00 20. " IRQS756 ,IRQS Status Bit 756" "Low,High" textline " " bitfld.long 0x00 19. " IRQS755 ,IRQS Status Bit 755" "Low,High" bitfld.long 0x00 18. " IRQS754 ,IRQS Status Bit 754" "Low,High" bitfld.long 0x00 17. " IRQS753 ,IRQS Status Bit 753" "Low,High" textline " " bitfld.long 0x00 16. " IRQS752 ,IRQS Status Bit 752" "Low,High" bitfld.long 0x00 15. " IRQS751 ,IRQS Status Bit 751" "Low,High" bitfld.long 0x00 14. " IRQS750 ,IRQS Status Bit 750" "Low,High" textline " " bitfld.long 0x00 13. " IRQS749 ,IRQS Status Bit 749" "Low,High" bitfld.long 0x00 12. " IRQS748 ,IRQS Status Bit 748" "Low,High" bitfld.long 0x00 11. " IRQS747 ,IRQS Status Bit 747" "Low,High" textline " " bitfld.long 0x00 10. " IRQS746 ,IRQS Status Bit 746" "Low,High" bitfld.long 0x00 9. " IRQS745 ,IRQS Status Bit 745" "Low,High" bitfld.long 0x00 8. " IRQS744 ,IRQS Status Bit 744" "Low,High" textline " " bitfld.long 0x00 7. " IRQS743 ,IRQS Status Bit 743" "Low,High" bitfld.long 0x00 6. " IRQS742 ,IRQS Status Bit 742" "Low,High" bitfld.long 0x00 5. " IRQS741 ,IRQS Status Bit 741" "Low,High" textline " " bitfld.long 0x00 4. " IRQS740 ,IRQS Status Bit 740" "Low,High" bitfld.long 0x00 3. " IRQS739 ,IRQS Status Bit 739" "Low,High" bitfld.long 0x00 2. " IRQS738 ,IRQS Status Bit 738" "Low,High" textline " " bitfld.long 0x00 1. " IRQS737 ,IRQS Status Bit 737" "Low,High" bitfld.long 0x00 0. " IRQS736 ,IRQS Status Bit 736" "Low,High" else hgroup.long 0x0D60++0x03 hide.long 0x0 "GICD_SPISR23,Shared Peripheral Interrupt Status Register 23" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x19) rgroup.long 0x0D64++0x03 line.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24" bitfld.long 0x00 31. " IRQS799 ,IRQS Status Bit 799" "Low,High" bitfld.long 0x00 30. " IRQS798 ,IRQS Status Bit 798" "Low,High" bitfld.long 0x00 29. " IRQS797 ,IRQS Status Bit 797" "Low,High" textline " " bitfld.long 0x00 28. " IRQS796 ,IRQS Status Bit 796" "Low,High" bitfld.long 0x00 27. " IRQS795 ,IRQS Status Bit 795" "Low,High" bitfld.long 0x00 26. " IRQS794 ,IRQS Status Bit 794" "Low,High" textline " " bitfld.long 0x00 25. " IRQS793 ,IRQS Status Bit 793" "Low,High" bitfld.long 0x00 24. " IRQS792 ,IRQS Status Bit 792" "Low,High" bitfld.long 0x00 23. " IRQS791 ,IRQS Status Bit 791" "Low,High" textline " " bitfld.long 0x00 22. " IRQS790 ,IRQS Status Bit 790" "Low,High" bitfld.long 0x00 21. " IRQS789 ,IRQS Status Bit 789" "Low,High" bitfld.long 0x00 20. " IRQS788 ,IRQS Status Bit 788" "Low,High" textline " " bitfld.long 0x00 19. " IRQS787 ,IRQS Status Bit 787" "Low,High" bitfld.long 0x00 18. " IRQS786 ,IRQS Status Bit 786" "Low,High" bitfld.long 0x00 17. " IRQS785 ,IRQS Status Bit 785" "Low,High" textline " " bitfld.long 0x00 16. " IRQS784 ,IRQS Status Bit 784" "Low,High" bitfld.long 0x00 15. " IRQS783 ,IRQS Status Bit 783" "Low,High" bitfld.long 0x00 14. " IRQS782 ,IRQS Status Bit 782" "Low,High" textline " " bitfld.long 0x00 13. " IRQS781 ,IRQS Status Bit 781" "Low,High" bitfld.long 0x00 12. " IRQS780 ,IRQS Status Bit 780" "Low,High" bitfld.long 0x00 11. " IRQS779 ,IRQS Status Bit 779" "Low,High" textline " " bitfld.long 0x00 10. " IRQS778 ,IRQS Status Bit 778" "Low,High" bitfld.long 0x00 9. " IRQS777 ,IRQS Status Bit 777" "Low,High" bitfld.long 0x00 8. " IRQS776 ,IRQS Status Bit 776" "Low,High" textline " " bitfld.long 0x00 7. " IRQS775 ,IRQS Status Bit 775" "Low,High" bitfld.long 0x00 6. " IRQS774 ,IRQS Status Bit 774" "Low,High" bitfld.long 0x00 5. " IRQS773 ,IRQS Status Bit 773" "Low,High" textline " " bitfld.long 0x00 4. " IRQS772 ,IRQS Status Bit 772" "Low,High" bitfld.long 0x00 3. " IRQS771 ,IRQS Status Bit 771" "Low,High" bitfld.long 0x00 2. " IRQS770 ,IRQS Status Bit 770" "Low,High" textline " " bitfld.long 0x00 1. " IRQS769 ,IRQS Status Bit 769" "Low,High" bitfld.long 0x00 0. " IRQS768 ,IRQS Status Bit 768" "Low,High" else hgroup.long 0x0D64++0x03 hide.long 0x0 "GICD_SPISR24,Shared Peripheral Interrupt Status Register 24" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1A) rgroup.long 0x0D68++0x03 line.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25" bitfld.long 0x00 31. " IRQS831 ,IRQS Status Bit 831" "Low,High" bitfld.long 0x00 30. " IRQS830 ,IRQS Status Bit 830" "Low,High" bitfld.long 0x00 29. " IRQS829 ,IRQS Status Bit 829" "Low,High" textline " " bitfld.long 0x00 28. " IRQS828 ,IRQS Status Bit 828" "Low,High" bitfld.long 0x00 27. " IRQS827 ,IRQS Status Bit 827" "Low,High" bitfld.long 0x00 26. " IRQS826 ,IRQS Status Bit 826" "Low,High" textline " " bitfld.long 0x00 25. " IRQS825 ,IRQS Status Bit 825" "Low,High" bitfld.long 0x00 24. " IRQS824 ,IRQS Status Bit 824" "Low,High" bitfld.long 0x00 23. " IRQS823 ,IRQS Status Bit 823" "Low,High" textline " " bitfld.long 0x00 22. " IRQS822 ,IRQS Status Bit 822" "Low,High" bitfld.long 0x00 21. " IRQS821 ,IRQS Status Bit 821" "Low,High" bitfld.long 0x00 20. " IRQS820 ,IRQS Status Bit 820" "Low,High" textline " " bitfld.long 0x00 19. " IRQS819 ,IRQS Status Bit 819" "Low,High" bitfld.long 0x00 18. " IRQS818 ,IRQS Status Bit 818" "Low,High" bitfld.long 0x00 17. " IRQS817 ,IRQS Status Bit 817" "Low,High" textline " " bitfld.long 0x00 16. " IRQS816 ,IRQS Status Bit 816" "Low,High" bitfld.long 0x00 15. " IRQS815 ,IRQS Status Bit 815" "Low,High" bitfld.long 0x00 14. " IRQS814 ,IRQS Status Bit 814" "Low,High" textline " " bitfld.long 0x00 13. " IRQS813 ,IRQS Status Bit 813" "Low,High" bitfld.long 0x00 12. " IRQS812 ,IRQS Status Bit 812" "Low,High" bitfld.long 0x00 11. " IRQS811 ,IRQS Status Bit 811" "Low,High" textline " " bitfld.long 0x00 10. " IRQS810 ,IRQS Status Bit 810" "Low,High" bitfld.long 0x00 9. " IRQS809 ,IRQS Status Bit 809" "Low,High" bitfld.long 0x00 8. " IRQS808 ,IRQS Status Bit 808" "Low,High" textline " " bitfld.long 0x00 7. " IRQS807 ,IRQS Status Bit 807" "Low,High" bitfld.long 0x00 6. " IRQS806 ,IRQS Status Bit 806" "Low,High" bitfld.long 0x00 5. " IRQS805 ,IRQS Status Bit 805" "Low,High" textline " " bitfld.long 0x00 4. " IRQS804 ,IRQS Status Bit 804" "Low,High" bitfld.long 0x00 3. " IRQS803 ,IRQS Status Bit 803" "Low,High" bitfld.long 0x00 2. " IRQS802 ,IRQS Status Bit 802" "Low,High" textline " " bitfld.long 0x00 1. " IRQS801 ,IRQS Status Bit 801" "Low,High" bitfld.long 0x00 0. " IRQS800 ,IRQS Status Bit 800" "Low,High" else hgroup.long 0x0D68++0x03 hide.long 0x0 "GICD_SPISR25,Shared Peripheral Interrupt Status Register 25" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1B) rgroup.long 0x0D6C++0x03 line.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26" bitfld.long 0x00 31. " IRQS863 ,IRQS Status Bit 863" "Low,High" bitfld.long 0x00 30. " IRQS862 ,IRQS Status Bit 862" "Low,High" bitfld.long 0x00 29. " IRQS861 ,IRQS Status Bit 861" "Low,High" textline " " bitfld.long 0x00 28. " IRQS860 ,IRQS Status Bit 860" "Low,High" bitfld.long 0x00 27. " IRQS859 ,IRQS Status Bit 859" "Low,High" bitfld.long 0x00 26. " IRQS858 ,IRQS Status Bit 858" "Low,High" textline " " bitfld.long 0x00 25. " IRQS857 ,IRQS Status Bit 857" "Low,High" bitfld.long 0x00 24. " IRQS856 ,IRQS Status Bit 856" "Low,High" bitfld.long 0x00 23. " IRQS855 ,IRQS Status Bit 855" "Low,High" textline " " bitfld.long 0x00 22. " IRQS854 ,IRQS Status Bit 854" "Low,High" bitfld.long 0x00 21. " IRQS853 ,IRQS Status Bit 853" "Low,High" bitfld.long 0x00 20. " IRQS852 ,IRQS Status Bit 852" "Low,High" textline " " bitfld.long 0x00 19. " IRQS851 ,IRQS Status Bit 851" "Low,High" bitfld.long 0x00 18. " IRQS850 ,IRQS Status Bit 850" "Low,High" bitfld.long 0x00 17. " IRQS849 ,IRQS Status Bit 849" "Low,High" textline " " bitfld.long 0x00 16. " IRQS848 ,IRQS Status Bit 848" "Low,High" bitfld.long 0x00 15. " IRQS847 ,IRQS Status Bit 847" "Low,High" bitfld.long 0x00 14. " IRQS846 ,IRQS Status Bit 846" "Low,High" textline " " bitfld.long 0x00 13. " IRQS845 ,IRQS Status Bit 845" "Low,High" bitfld.long 0x00 12. " IRQS844 ,IRQS Status Bit 844" "Low,High" bitfld.long 0x00 11. " IRQS843 ,IRQS Status Bit 843" "Low,High" textline " " bitfld.long 0x00 10. " IRQS842 ,IRQS Status Bit 842" "Low,High" bitfld.long 0x00 9. " IRQS841 ,IRQS Status Bit 841" "Low,High" bitfld.long 0x00 8. " IRQS840 ,IRQS Status Bit 840" "Low,High" textline " " bitfld.long 0x00 7. " IRQS839 ,IRQS Status Bit 839" "Low,High" bitfld.long 0x00 6. " IRQS838 ,IRQS Status Bit 838" "Low,High" bitfld.long 0x00 5. " IRQS837 ,IRQS Status Bit 837" "Low,High" textline " " bitfld.long 0x00 4. " IRQS836 ,IRQS Status Bit 836" "Low,High" bitfld.long 0x00 3. " IRQS835 ,IRQS Status Bit 835" "Low,High" bitfld.long 0x00 2. " IRQS834 ,IRQS Status Bit 834" "Low,High" textline " " bitfld.long 0x00 1. " IRQS833 ,IRQS Status Bit 833" "Low,High" bitfld.long 0x00 0. " IRQS832 ,IRQS Status Bit 832" "Low,High" else hgroup.long 0x0D6C++0x03 hide.long 0x0 "GICD_SPISR26,Shared Peripheral Interrupt Status Register 26" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1C) rgroup.long 0x0D70++0x03 line.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27" bitfld.long 0x00 31. " IRQS895 ,IRQS Status Bit 895" "Low,High" bitfld.long 0x00 30. " IRQS894 ,IRQS Status Bit 894" "Low,High" bitfld.long 0x00 29. " IRQS893 ,IRQS Status Bit 893" "Low,High" textline " " bitfld.long 0x00 28. " IRQS892 ,IRQS Status Bit 892" "Low,High" bitfld.long 0x00 27. " IRQS891 ,IRQS Status Bit 891" "Low,High" bitfld.long 0x00 26. " IRQS890 ,IRQS Status Bit 890" "Low,High" textline " " bitfld.long 0x00 25. " IRQS889 ,IRQS Status Bit 889" "Low,High" bitfld.long 0x00 24. " IRQS888 ,IRQS Status Bit 888" "Low,High" bitfld.long 0x00 23. " IRQS887 ,IRQS Status Bit 887" "Low,High" textline " " bitfld.long 0x00 22. " IRQS886 ,IRQS Status Bit 886" "Low,High" bitfld.long 0x00 21. " IRQS885 ,IRQS Status Bit 885" "Low,High" bitfld.long 0x00 20. " IRQS884 ,IRQS Status Bit 884" "Low,High" textline " " bitfld.long 0x00 19. " IRQS883 ,IRQS Status Bit 883" "Low,High" bitfld.long 0x00 18. " IRQS882 ,IRQS Status Bit 882" "Low,High" bitfld.long 0x00 17. " IRQS881 ,IRQS Status Bit 881" "Low,High" textline " " bitfld.long 0x00 16. " IRQS880 ,IRQS Status Bit 880" "Low,High" bitfld.long 0x00 15. " IRQS879 ,IRQS Status Bit 879" "Low,High" bitfld.long 0x00 14. " IRQS878 ,IRQS Status Bit 878" "Low,High" textline " " bitfld.long 0x00 13. " IRQS877 ,IRQS Status Bit 877" "Low,High" bitfld.long 0x00 12. " IRQS876 ,IRQS Status Bit 876" "Low,High" bitfld.long 0x00 11. " IRQS875 ,IRQS Status Bit 875" "Low,High" textline " " bitfld.long 0x00 10. " IRQS874 ,IRQS Status Bit 874" "Low,High" bitfld.long 0x00 9. " IRQS873 ,IRQS Status Bit 873" "Low,High" bitfld.long 0x00 8. " IRQS872 ,IRQS Status Bit 872" "Low,High" textline " " bitfld.long 0x00 7. " IRQS871 ,IRQS Status Bit 871" "Low,High" bitfld.long 0x00 6. " IRQS870 ,IRQS Status Bit 870" "Low,High" bitfld.long 0x00 5. " IRQS869 ,IRQS Status Bit 869" "Low,High" textline " " bitfld.long 0x00 4. " IRQS868 ,IRQS Status Bit 868" "Low,High" bitfld.long 0x00 3. " IRQS867 ,IRQS Status Bit 867" "Low,High" bitfld.long 0x00 2. " IRQS866 ,IRQS Status Bit 866" "Low,High" textline " " bitfld.long 0x00 1. " IRQS865 ,IRQS Status Bit 865" "Low,High" bitfld.long 0x00 0. " IRQS864 ,IRQS Status Bit 864" "Low,High" else hgroup.long 0x0D70++0x03 hide.long 0x0 "GICD_SPISR27,Shared Peripheral Interrupt Status Register 27" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1D) rgroup.long 0x0D74++0x03 line.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28" bitfld.long 0x00 31. " IRQS927 ,IRQS Status Bit 927" "Low,High" bitfld.long 0x00 30. " IRQS926 ,IRQS Status Bit 926" "Low,High" bitfld.long 0x00 29. " IRQS925 ,IRQS Status Bit 925" "Low,High" textline " " bitfld.long 0x00 28. " IRQS924 ,IRQS Status Bit 924" "Low,High" bitfld.long 0x00 27. " IRQS923 ,IRQS Status Bit 923" "Low,High" bitfld.long 0x00 26. " IRQS922 ,IRQS Status Bit 922" "Low,High" textline " " bitfld.long 0x00 25. " IRQS921 ,IRQS Status Bit 921" "Low,High" bitfld.long 0x00 24. " IRQS920 ,IRQS Status Bit 920" "Low,High" bitfld.long 0x00 23. " IRQS919 ,IRQS Status Bit 919" "Low,High" textline " " bitfld.long 0x00 22. " IRQS918 ,IRQS Status Bit 918" "Low,High" bitfld.long 0x00 21. " IRQS917 ,IRQS Status Bit 917" "Low,High" bitfld.long 0x00 20. " IRQS916 ,IRQS Status Bit 916" "Low,High" textline " " bitfld.long 0x00 19. " IRQS915 ,IRQS Status Bit 915" "Low,High" bitfld.long 0x00 18. " IRQS914 ,IRQS Status Bit 914" "Low,High" bitfld.long 0x00 17. " IRQS913 ,IRQS Status Bit 913" "Low,High" textline " " bitfld.long 0x00 16. " IRQS912 ,IRQS Status Bit 912" "Low,High" bitfld.long 0x00 15. " IRQS911 ,IRQS Status Bit 911" "Low,High" bitfld.long 0x00 14. " IRQS910 ,IRQS Status Bit 910" "Low,High" textline " " bitfld.long 0x00 13. " IRQS909 ,IRQS Status Bit 909" "Low,High" bitfld.long 0x00 12. " IRQS908 ,IRQS Status Bit 908" "Low,High" bitfld.long 0x00 11. " IRQS907 ,IRQS Status Bit 907" "Low,High" textline " " bitfld.long 0x00 10. " IRQS906 ,IRQS Status Bit 906" "Low,High" bitfld.long 0x00 9. " IRQS905 ,IRQS Status Bit 905" "Low,High" bitfld.long 0x00 8. " IRQS904 ,IRQS Status Bit 904" "Low,High" textline " " bitfld.long 0x00 7. " IRQS903 ,IRQS Status Bit 903" "Low,High" bitfld.long 0x00 6. " IRQS902 ,IRQS Status Bit 902" "Low,High" bitfld.long 0x00 5. " IRQS901 ,IRQS Status Bit 901" "Low,High" textline " " bitfld.long 0x00 4. " IRQS900 ,IRQS Status Bit 900" "Low,High" bitfld.long 0x00 3. " IRQS899 ,IRQS Status Bit 899" "Low,High" bitfld.long 0x00 2. " IRQS898 ,IRQS Status Bit 898" "Low,High" textline " " bitfld.long 0x00 1. " IRQS897 ,IRQS Status Bit 897" "Low,High" bitfld.long 0x00 0. " IRQS896 ,IRQS Status Bit 896" "Low,High" else hgroup.long 0x0D74++0x03 hide.long 0x0 "GICD_SPISR28,Shared Peripheral Interrupt Status Register 28" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1E) rgroup.long 0x0D78++0x03 line.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29" bitfld.long 0x00 31. " IRQS959 ,IRQS Status Bit 959" "Low,High" bitfld.long 0x00 30. " IRQS958 ,IRQS Status Bit 958" "Low,High" bitfld.long 0x00 29. " IRQS957 ,IRQS Status Bit 957" "Low,High" textline " " bitfld.long 0x00 28. " IRQS956 ,IRQS Status Bit 956" "Low,High" bitfld.long 0x00 27. " IRQS955 ,IRQS Status Bit 955" "Low,High" bitfld.long 0x00 26. " IRQS954 ,IRQS Status Bit 954" "Low,High" textline " " bitfld.long 0x00 25. " IRQS953 ,IRQS Status Bit 953" "Low,High" bitfld.long 0x00 24. " IRQS952 ,IRQS Status Bit 952" "Low,High" bitfld.long 0x00 23. " IRQS951 ,IRQS Status Bit 951" "Low,High" textline " " bitfld.long 0x00 22. " IRQS950 ,IRQS Status Bit 950" "Low,High" bitfld.long 0x00 21. " IRQS949 ,IRQS Status Bit 949" "Low,High" bitfld.long 0x00 20. " IRQS948 ,IRQS Status Bit 948" "Low,High" textline " " bitfld.long 0x00 19. " IRQS947 ,IRQS Status Bit 947" "Low,High" bitfld.long 0x00 18. " IRQS946 ,IRQS Status Bit 946" "Low,High" bitfld.long 0x00 17. " IRQS945 ,IRQS Status Bit 945" "Low,High" textline " " bitfld.long 0x00 16. " IRQS944 ,IRQS Status Bit 944" "Low,High" bitfld.long 0x00 15. " IRQS943 ,IRQS Status Bit 943" "Low,High" bitfld.long 0x00 14. " IRQS942 ,IRQS Status Bit 942" "Low,High" textline " " bitfld.long 0x00 13. " IRQS941 ,IRQS Status Bit 941" "Low,High" bitfld.long 0x00 12. " IRQS940 ,IRQS Status Bit 940" "Low,High" bitfld.long 0x00 11. " IRQS939 ,IRQS Status Bit 939" "Low,High" textline " " bitfld.long 0x00 10. " IRQS938 ,IRQS Status Bit 938" "Low,High" bitfld.long 0x00 9. " IRQS937 ,IRQS Status Bit 937" "Low,High" bitfld.long 0x00 8. " IRQS936 ,IRQS Status Bit 936" "Low,High" textline " " bitfld.long 0x00 7. " IRQS935 ,IRQS Status Bit 935" "Low,High" bitfld.long 0x00 6. " IRQS934 ,IRQS Status Bit 934" "Low,High" bitfld.long 0x00 5. " IRQS933 ,IRQS Status Bit 933" "Low,High" textline " " bitfld.long 0x00 4. " IRQS932 ,IRQS Status Bit 932" "Low,High" bitfld.long 0x00 3. " IRQS931 ,IRQS Status Bit 931" "Low,High" bitfld.long 0x00 2. " IRQS930 ,IRQS Status Bit 930" "Low,High" textline " " bitfld.long 0x00 1. " IRQS929 ,IRQS Status Bit 929" "Low,High" bitfld.long 0x00 0. " IRQS928 ,IRQS Status Bit 928" "Low,High" else hgroup.long 0x0D78++0x03 hide.long 0x0 "GICD_SPISR29,Shared Peripheral Interrupt Status Register 29" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x0000001F)>=0x1F) rgroup.long 0x0D7C++0x03 line.long 0x0 "GICD_SPISR30,Shared Peripheral Interrupt Status Register 30" bitfld.long 0x00 27. " IRQS987 ,IRQS Status Bit 987" "Low,High" bitfld.long 0x00 26. " IRQS986 ,IRQS Status Bit 986" "Low,High" textline " " bitfld.long 0x00 25. " IRQS985 ,IRQS Status Bit 985" "Low,High" bitfld.long 0x00 24. " IRQS984 ,IRQS Status Bit 984" "Low,High" bitfld.long 0x00 23. " IRQS983 ,IRQS Status Bit 983" "Low,High" textline " " bitfld.long 0x00 22. " IRQS982 ,IRQS Status Bit 982" "Low,High" bitfld.long 0x00 21. " IRQS981 ,IRQS Status Bit 981" "Low,High" bitfld.long 0x00 20. " IRQS980 ,IRQS Status Bit 980" "Low,High" textline " " bitfld.long 0x00 19. " IRQS979 ,IRQS Status Bit 979" "Low,High" bitfld.long 0x00 18. " IRQS978 ,IRQS Status Bit 978" "Low,High" bitfld.long 0x00 17. " IRQS977 ,IRQS Status Bit 977" "Low,High" textline " " bitfld.long 0x00 16. " IRQS976 ,IRQS Status Bit 976" "Low,High" bitfld.long 0x00 15. " IRQS975 ,IRQS Status Bit 975" "Low,High" bitfld.long 0x00 14. " IRQS974 ,IRQS Status Bit 974" "Low,High" textline " " bitfld.long 0x00 13. " IRQS973 ,IRQS Status Bit 973" "Low,High" bitfld.long 0x00 12. " IRQS972 ,IRQS Status Bit 972" "Low,High" bitfld.long 0x00 11. " IRQS971 ,IRQS Status Bit 971" "Low,High" textline " " bitfld.long 0x00 10. " IRQS970 ,IRQS Status Bit 970" "Low,High" bitfld.long 0x00 9. " IRQS969 ,IRQS Status Bit 969" "Low,High" bitfld.long 0x00 8. " IRQS968 ,IRQS Status Bit 968" "Low,High" textline " " bitfld.long 0x00 7. " IRQS967 ,IRQS Status Bit 967" "Low,High" bitfld.long 0x00 6. " IRQS966 ,IRQS Status Bit 966" "Low,High" bitfld.long 0x00 5. " IRQS965 ,IRQS Status Bit 965" "Low,High" textline " " bitfld.long 0x00 4. " IRQS964 ,IRQS Status Bit 964" "Low,High" bitfld.long 0x00 3. " IRQS963 ,IRQS Status Bit 963" "Low,High" bitfld.long 0x00 2. " IRQS962 ,IRQS Status Bit 962" "Low,High" textline " " bitfld.long 0x00 1. " IRQS961 ,IRQS Status Bit 961" "Low,High" bitfld.long 0x00 0. " IRQS960 ,IRQS Status Bit 960" "Low,High" else hgroup.long 0x0D7C++0x03 hide.long 0x0 "GICD_SPISR30,Shared Peripheral Interrupt Status Register 30" textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " textline " " endif tree.end width 25. tree "Software Generated Interrupt" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x400)==0x400) wgroup.long 0x0F00++0x03 line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register" bitfld.long 0x00 24.--25. " TLF ,Target List Filter" "TargetList,All CPUs,Request CPU,?..." hexmask.long.byte 0x00 16.--23. 1. " CPUTL ,CPU Target List" textline " " bitfld.long 0x00 15. " NSATT ,NSATT" "Secure,Non-secure" bitfld.long 0x00 0.--3. " SGINTID ,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" else wgroup.long 0x0F00++0x03 line.long 0x00 "GICD_SGIR,Software Generated Interrupt Register" bitfld.long 0x00 24.--25. " TLF ,Target List Filter" "TargetList,All CPUs,Request CPU,?..." hexmask.long.byte 0x00 16.--23. 1. " CPUTL ,CPU Target List" textline " " bitfld.long 0x00 0.--3. " SGINTID ,SGI Interrupt ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" endif tree.end width 12. tree "Peripheral/Component ID Registers" rgroup.byte 0x0FE0++0x00 line.byte 0x00 "GICD_PIDR0,Peripheral ID0 Register" hexmask.byte 0x00 0.--7. 1. " PART_NUMBER_0 ,Returns 0x90" rgroup.byte 0x0FE4++0x00 line.byte 0x00 "GICD_PIDR1,Peripheral ID1 Register" bitfld.byte 0x00 4.--7. " JEP106_ID_3_0 ,JEP106 identity code [3:0]" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " PART_NUMBER_1 ,Returns 0x3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FE8++0x00 line.byte 0x00 "GICD_PIDR2,Peripheral ID2 Register" bitfld.byte 0x00 4.--7. " ARCHITECTURE ,Identifies the architecture version of the GIC" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 3. " JEDEC_USED ,This indicates that the GIC uses a manufacturers identity code that was allocated by JEDEC according to JEP106" "Low,High" bitfld.byte 0x00 0.--2. " JEP106_ID_CODE ,JEP106 identity code field" "0,1,2,3,4,5,6,7" rgroup.byte 0x0FEC++0x00 line.byte 0x00 "GICD_PIDR3,Peripheral ID3 Register" bitfld.byte 0x00 4.--7. " REVAND ,The top-level RTL provides four AND gates that are tied-off to provide an output value of 0x0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " MOD_NUMBER ,The customer can update this field if they modify the RTL of the GIC" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FD0++0x00 line.byte 0x00 "GICD_PIDR4,Peripheral ID4 Register" bitfld.byte 0x00 4.--7. " 4KB_COUNT ,The number of 4KB address blocks you require to access the registers expressed in powers of 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " JEP106_C_CODE ,The JEP106 continuation code value represents how many 0x7F continuation characters occur in the manufacturers identity code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FD4++0x00 line.byte 0x00 "GICD_PIDR5,Peripheral ID5 Register" bitfld.byte 0x00 5.--7. " PPI_NUMBER_0 ,The LSBs of the number of PPIs that the GIC provides" "0,1,2,3,4,5,6,7" bitfld.byte 0x00 0.--4. " SGI_NUMBER ,The number of SGIs that the GIC provides" "None,INTID0,INTID[1:0],INTID[2:0],INTID[3:0],INTID[4:0],INTID[5:0],INTID[6:0],INTID[7:0],INTID[8:0],INTID[9:0],INTID[10:0],INTID[11:0],INTID[12:0],INTID[13:0],INTID[14:0],INTID[15:0],?..." rgroup.byte 0x0FD8++0x00 line.byte 0x00 "GICD_PIDR6,Peripheral ID6 Register" bitfld.byte 0x00 2.--7. " SPI_NUMBER_0 ,The LSBs of the number of SPIs that the GIC provides" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.byte 0x00 0.--1. " PPI_NUMBER_1 ,The MSBs of the number of PPIs that the GIC provides" "0,1,2,3" rgroup.byte 0x0FDC++0x00 line.byte 0x00 "GICD_PIDR7,Peripheral ID7 Register" bitfld.byte 0x00 7. " TZ ,Identifies the number of security states that the GIC supports" "S,NS&S" bitfld.byte 0x00 4.--6. " PRIORITY ,The number of priority levels that the GIC provides" "16,32,64,128,256,?..." bitfld.byte 0x00 0.--3. " SPI_NUMBER_1 ,The MSBs of the number of SPIs that the GIC provides" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" rgroup.byte 0x0FC0++0x00 line.byte 0x00 "GICD_PIDR8,Peripheral ID8 Register" bitfld.byte 0x00 7. " IDENTIFIER ,Identifies the AMBA interface that this register belongs to" "Distributor,CPU Interface" bitfld.byte 0x00 5.--6. " IF_TYPE ,Identifies the AMBA protocol that the GIC supports" "AXI,AHB-Lite,?..." bitfld.byte 0x00 2.--4. " CPU_IF ,Identifies the number of CPU Interfaces that the GIC contains" "1,2,3,4,5,6,7,8" textline " " bitfld.byte 0x00 1. " FIQ_LEGACY ,Identifies if the GIC provides a legacy FIQ input signal for each CPU Interface" "Not supported,Supported" bitfld.byte 0x00 0. " IRQ_LEGACY ,Identifies if the GIC provides a legacy IRQ input signal for each CPU Interface" "Not supported,Supported" tree.end tree.end base AD:(((data.long(c15:0x400F)&0xffff8000))+0x100) width 17. tree "CPU Interface" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x400)==0x0) group.long 0x0000++0x03 line.long 0x00 "GICC_CTLR,CPU Interface Control Register" bitfld.long 0x00 0. " ENABLE ,Enable for the signaling of Group 1 interrupts by the CPU interface to the connected processor" "Disabled,Enabled" textline " " textline " " textline " " else if PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x100)) group.long 0x0000++0x03 line.long 0x00 "GICC_CTLR,CPU Interface Control Register (Secure access)" bitfld.long 0x00 4. " SBPR ,Controls whether the GICC_BPR provides common control to Group 0 and Group 1 interrupts" "Group 0,Group 1" bitfld.long 0x00 3. " FIQEN ,Controls whether the CPU interface signals Group 0 interrupts to a target processor using the FIQ or the IRQ signal" "IRQ,FIQ" bitfld.long 0x00 2. " ACKCTL ,Acknowledge Control" "ID 1022 interrupt,Corresponding interrupt" textline " " bitfld.long 0x00 1. " ENABLENS ,Enable for the signaling of Group 1 interrupts by the CPU interface to the connected processor" "Disabled,Enabled" bitfld.long 0x00 0. " ENABLES ,Enable for the signaling of Group 0 interrupts by the CPU interface to the connected processor" "Disabled,Enabled" textline " " textline " " else group.long 0x0000++0x03 line.long 0x00 "GICC_CTLR,CPU Interface Control Register (Non-secure access)" bitfld.long 0x00 0. " ENABLE ,Enable for the signaling of Group 1 interrupts by the CPU interface to the connected processor" "Disabled,Enabled" textline " " textline " " textline " " endif endif group.long 0x0004++0x03 line.long 0x00 "GICC_PMR,Interrupt Priority Mask Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,Priority mask level for CPU interface" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x400)==0x400) if PER.ADDRESS.isSECUREEX(AD:(((data.long(c15:0x400F)&0xffff8000))+0x100)+0x0008) group.long 0x0008++0x03 line.long 0x00 "GICC_BPR,Binary Point Register (Secure access)" bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" else group.long 0x0008++0x03 line.long 0x00 "GICC_BPR,Binary Point Register (Non-secure access)" bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,Reserved,[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" endif else group.long 0x0008++0x03 line.long 0x00 "GICC_BPR,Binary Point Register" bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "Reserved,Reserved,Reserved,[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" endif hgroup.long 0x000C++0x03 hide.long 0x00 "GICC_IAR,Interrupt Acknowledge Register" in wgroup.long 0x0010++0x03 line.long 0x00 "GICC_EOIR,End Of Interrupt Register" bitfld.long 0x00 10.--12. " CPUID ,On a multiprocessor implementation if the write refers to an SGI this field contains the CPUID value from the corresponding GICC_IAR access" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 0.--9. 1. " EOIINTID ,The Interrupt ID value from the corresponding GICC_IAR access" rgroup.long 0x0014++0x03 line.long 0x00 "GICC_RPR,Running Priority Register" hexmask.long.byte 0x00 0.--7. 1. " PRIORITY ,The current running priority on the CPU interface" rgroup.long 0x0018++0x03 line.long 0x00 "GICC_HPIR,Highest Priority Pending Interrupt Register" bitfld.long 0x00 10.--12. " CPUID ,On a multiprocessor implementation if the PENDINTID field returns the ID of an SGI this field contains the CPUID value for that interrupt" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 0.--9. 1. " PENDINTID ,The interrupt ID of the highest priority pending interrupt" if (((per.l(AD:(((data.long(c15:0x400F)&0xffff8000))+0x1000)+0x04))&0x400)==0x400) group.long 0x001C++0x03 line.long 0x00 "GICC_ABPR,Aliased Binary Point Register" bitfld.long 0x00 0.--2. " BINARY_POINT ,The value of this field controls how the 8-bit interrupt priority field is split into a group priority field and subpriority field" "[7:1]/[0],[7:2]/[1:0],[7:3]/[2:0],[7:4]/[3:0],[7:5]/[4:0],[7:6]/[5:0],[7]/[6:0],-/[7:0]" else hgroup.long 0x001C++0x03 hide.long 0x00 "GICC_ABPR,Aliased Binary Point Register" endif rgroup.long 0x00FC++0x03 line.long 0x00 "GICC_IIDR,CPU and Virtual CPU Interface Identification Register" hexmask.long.word 0x00 20.--31. 1. " PRODID ,Product ID" bitfld.long 0x00 16.--19. " ARCH_VER ,Identifies the architecture version of the GIC" "GICv1,GICv1,GICv2,GICv2,?..." textline " " bitfld.long 0x00 12.--15. " REV ,Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--11. 1. " IMP ,Implementer" tree.end width 0x0B tree.end tree.end tree "ACM (ADC Control Module)" base ad:0x31020000 width 15. group.long 0x0++0x3 line.long 0x00 "ACM0_CTL,ACM0 Control Register" bitfld.long 0x00 15. " EPS ,External Peripheral Select" "0,1" bitfld.long 0x00 14. " OTSEL ,Order Trigger Select" "0,1" bitfld.long 0x00 13. " AOREN ,Automatic Order Reset Enable" "0,1" bitfld.long 0x00 12. " ORST ,Order Register Reset" "0,1" newline bitfld.long 0x00 11. " CLKMOD ,ADC Clock Mode" "0,1" bitfld.long 0x00 10. " CLKPOL ,Clock Polarity" "0,1" bitfld.long 0x00 9. " CSPOL ,Chip Select Polarity" "0,1" bitfld.long 0x00 8. " TRGPOL1 ,Trigger Polarity TMR1" "0,1" newline bitfld.long 0x00 7. " TRGPOL0 ,Trigger Polarity TMR0" "0,1" bitfld.long 0x00 5.--6. " TRGSEL1 ,Trigger Select TMR1" "0,1,2,3" bitfld.long 0x00 3.--4. " TRGSEL0 ,Trigger Select TMR0" "0,1,2,3" bitfld.long 0x00 2. " TMR1EN ,TMR1 Enable" "0,1" newline bitfld.long 0x00 1. " TMR0EN ,TMR0 Enable" "0,1" bitfld.long 0x00 0. " EN ,ACM Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "ACM0_TC0,ACM0 Timing Configuration 0 Register" hexmask.long.word 0x00 16.--27. 1. " SC ,Setup Cycle" hexmask.long.byte 0x00 0.--7. 1. " CKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "ACM0_TC1,ACM0 Timing Configuration 1 Register" bitfld.long 0x00 12.--15. " ZC ,Zero Cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " HC ,Hold Cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. " CSW ,Chip Select Width" group.long 0xC++0x3 line.long 0x00 "ACM0_STAT,ACM0 Status Register" bitfld.long 0x00 4.--7. " CEVNT ,Current Event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. " ECOM1 ,Event Completion 1" "0,1" bitfld.long 0x00 2. " ECOM0 ,Event Completion 0" "0,1" bitfld.long 0x00 1. " EMISS ,Event(s) Missed" "0,1" newline bitfld.long 0x00 0. " BSY ,Busy" "0,1" group.long 0x10++0x3 line.long 0x00 "ACM0_EVSTAT,ACM0 Event Complete Status Register" bitfld.long 0x00 17. " ECOM1S ,Event Complete 1 Status" "0,1" bitfld.long 0x00 16. " ECOM0S ,Event Complete 0 Status" "0,1" bitfld.long 0x00 15. " EV15 ,Event 15 Status" "0,1" bitfld.long 0x00 14. " EV14 ,Event 14 Status" "0,1" newline bitfld.long 0x00 13. " EV13 ,Event 13 Status" "0,1" bitfld.long 0x00 12. " EV12 ,Event 12 Status" "0,1" bitfld.long 0x00 11. " EV11 ,Event 11 Status" "0,1" bitfld.long 0x00 10. " EV10 ,Event 10 Status" "0,1" newline bitfld.long 0x00 9. " EV9 ,Event 9 Status" "0,1" bitfld.long 0x00 8. " EV8 ,Event 8 Status" "0,1" bitfld.long 0x00 7. " EV7 ,Event 7 Status" "0,1" bitfld.long 0x00 6. " EV6 ,Event 6 Status" "0,1" newline bitfld.long 0x00 5. " EV5 ,Event 5 Status" "0,1" bitfld.long 0x00 4. " EV4 ,Event 4 Status" "0,1" bitfld.long 0x00 3. " EV3 ,Event 3 Status" "0,1" bitfld.long 0x00 2. " EV2 ,Event 2 Status" "0,1" newline bitfld.long 0x00 1. " EV1 ,Event 1 Status" "0,1" bitfld.long 0x00 0. " EV0 ,Event 0 Status" "0,1" group.long 0x14++0x3 line.long 0x00 "ACM0_EVMSK,ACM0 Event Complete Interrupt Mask Register" bitfld.long 0x00 17. " IECOM1 ,Event Complete 1 Interrupt Enable" "0,1" bitfld.long 0x00 16. " IECOM0 ,Event Complete 0 Interrupt Enable" "0,1" bitfld.long 0x00 15. " EV15 ,Event 15 Interrupt Enable" "0,1" bitfld.long 0x00 14. " EV14 ,Event 14 Interrupt Enable" "0,1" newline bitfld.long 0x00 13. " EV13 ,Event 13 Interrupt Enable" "0,1" bitfld.long 0x00 12. " EV12 ,Event 12 Interrupt Enable" "0,1" bitfld.long 0x00 11. " EV11 ,Event 11 Interrupt Enable" "0,1" bitfld.long 0x00 10. " EV10 ,Event 10 Interrupt Enable" "0,1" newline bitfld.long 0x00 9. " EV9 ,Event 9 Interrupt Enable" "0,1" bitfld.long 0x00 8. " EV8 ,Event 8 Interrupt Enable" "0,1" bitfld.long 0x00 7. " EV7 ,Event 7 Interrupt Enable" "0,1" bitfld.long 0x00 6. " EV6 ,Event 6 Interrupt Enable" "0,1" newline bitfld.long 0x00 5. " EV5 ,Event 5 Interrupt Enable" "0,1" bitfld.long 0x00 4. " EV4 ,Event 4 Interrupt Enable" "0,1" bitfld.long 0x00 3. " EV3 ,Event 3 Interrupt Enable" "0,1" bitfld.long 0x00 2. " EV2 ,Event 2 Interrupt Enable" "0,1" newline bitfld.long 0x00 1. " EV1 ,Event 1 Interrupt Enable" "0,1" bitfld.long 0x00 0. " EV0 ,Event 0 Interrupt Enable" "0,1" group.long 0x18++0x3 line.long 0x00 "ACM0_MEVSTAT,ACM0 Missed Event Status Register" bitfld.long 0x00 15. " EV15 ,Event 15 Missed" "0,1" bitfld.long 0x00 14. " EV14 ,Event 14 Missed" "0,1" bitfld.long 0x00 13. " EV13 ,Event 13 Missed" "0,1" bitfld.long 0x00 12. " EV12 ,Event 12 Missed" "0,1" newline bitfld.long 0x00 11. " EV11 ,Event 11 Missed" "0,1" bitfld.long 0x00 10. " EV10 ,Event 10 Missed" "0,1" bitfld.long 0x00 9. " EV9 ,Event 9 Missed" "0,1" bitfld.long 0x00 8. " EV8 ,Event 8 Missed" "0,1" newline bitfld.long 0x00 7. " EV7 ,Event 7 Missed" "0,1" bitfld.long 0x00 6. " EV6 ,Event 6 Missed" "0,1" bitfld.long 0x00 5. " EV5 ,Event 5 Missed" "0,1" bitfld.long 0x00 4. " EV4 ,Event 4 Missed" "0,1" newline bitfld.long 0x00 3. " EV3 ,Event 3 Missed" "0,1" bitfld.long 0x00 2. " EV2 ,Event 2 Missed" "0,1" bitfld.long 0x00 1. " EV1 ,Event 1 Missed" "0,1" bitfld.long 0x00 0. " EV0 ,Event 0 Missed" "0,1" group.long 0x1C++0x3 line.long 0x00 "ACM0_MEVMSK,ACM0 Missed Event Interrupt Mask Register" bitfld.long 0x00 15. " EV15 ,Event 15 Missed Interrupt Enable" "0,1" bitfld.long 0x00 14. " EV14 ,Event 14 Missed Interrupt Enable" "0,1" bitfld.long 0x00 13. " EV13 ,Event 13 Missed Interrupt Enable" "0,1" bitfld.long 0x00 12. " EV12 ,Event 12 Missed Interrupt Enable" "0,1" newline bitfld.long 0x00 11. " EV11 ,Event 11 Missed Interrupt Enable" "0,1" bitfld.long 0x00 10. " EV10 ,Event 10 Missed Interrupt Enable" "0,1" bitfld.long 0x00 9. " EV9 ,Event 9 Missed Interrupt Enable" "0,1" bitfld.long 0x00 8. " EV8 ,Event 8 Missed Interrupt Enable" "0,1" newline bitfld.long 0x00 7. " EV7 ,Event 7 Missed Interrupt Enable" "0,1" bitfld.long 0x00 6. " EV6 ,Event 6 Missed Interrupt Enable" "0,1" bitfld.long 0x00 5. " EV5 ,Event 5 Missed Interrupt Enable" "0,1" bitfld.long 0x00 4. " EV4 ,Event 4 Missed Interrupt Enable" "0,1" newline bitfld.long 0x00 3. " EV3 ,Event 3 Missed Interrupt Enable" "0,1" bitfld.long 0x00 2. " EV2 ,Event 2 Missed Interrupt Enable" "0,1" bitfld.long 0x00 1. " EV1 ,Event 1 Missed Interrupt Enable" "0,1" bitfld.long 0x00 0. " EV0 ,Event 0 Missed Interrupt Enable" "0,1" group.long 0x20++0x3 line.long 0x00 "ACM0_EVCTL0,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x24++0x3 line.long 0x00 "ACM0_EVCTL1,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x28++0x3 line.long 0x00 "ACM0_EVCTL2,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x2C++0x3 line.long 0x00 "ACM0_EVCTL3,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x30++0x3 line.long 0x00 "ACM0_EVCTL4,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x34++0x3 line.long 0x00 "ACM0_EVCTL5,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x38++0x3 line.long 0x00 "ACM0_EVCTL6,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x3C++0x3 line.long 0x00 "ACM0_EVCTL7,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x40++0x3 line.long 0x00 "ACM0_EVCTL8,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x44++0x3 line.long 0x00 "ACM0_EVCTL9,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x48++0x3 line.long 0x00 "ACM0_EVCTL10,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x4C++0x3 line.long 0x00 "ACM0_EVCTL11,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x50++0x3 line.long 0x00 "ACM0_EVCTL12,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x54++0x3 line.long 0x00 "ACM0_EVCTL13,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x58++0x3 line.long 0x00 "ACM0_EVCTL14,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x5C++0x3 line.long 0x00 "ACM0_EVCTL15,ACM0 Event N Control Register" bitfld.long 0x00 1.--5. " EPF ,Event Parameter Field" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " ENAEV ,Enable Event" "0,1" group.long 0x60++0x3 line.long 0x00 "ACM0_EVTIME0,ACM0 Event N Time Register" group.long 0x64++0x3 line.long 0x00 "ACM0_EVTIME1,ACM0 Event N Time Register" group.long 0x68++0x3 line.long 0x00 "ACM0_EVTIME2,ACM0 Event N Time Register" group.long 0x6C++0x3 line.long 0x00 "ACM0_EVTIME3,ACM0 Event N Time Register" group.long 0x70++0x3 line.long 0x00 "ACM0_EVTIME4,ACM0 Event N Time Register" group.long 0x74++0x3 line.long 0x00 "ACM0_EVTIME5,ACM0 Event N Time Register" group.long 0x78++0x3 line.long 0x00 "ACM0_EVTIME6,ACM0 Event N Time Register" group.long 0x7C++0x3 line.long 0x00 "ACM0_EVTIME7,ACM0 Event N Time Register" group.long 0x80++0x3 line.long 0x00 "ACM0_EVTIME8,ACM0 Event N Time Register" group.long 0x84++0x3 line.long 0x00 "ACM0_EVTIME9,ACM0 Event N Time Register" group.long 0x88++0x3 line.long 0x00 "ACM0_EVTIME10,ACM0 Event N Time Register" group.long 0x8C++0x3 line.long 0x00 "ACM0_EVTIME11,ACM0 Event N Time Register" group.long 0x90++0x3 line.long 0x00 "ACM0_EVTIME12,ACM0 Event N Time Register" group.long 0x94++0x3 line.long 0x00 "ACM0_EVTIME13,ACM0 Event N Time Register" group.long 0x98++0x3 line.long 0x00 "ACM0_EVTIME14,ACM0 Event N Time Register" group.long 0x9C++0x3 line.long 0x00 "ACM0_EVTIME15,ACM0 Event N Time Register" group.long 0xA0++0x3 line.long 0x00 "ACM0_EVORD0,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xA4++0x3 line.long 0x00 "ACM0_EVORD1,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xA8++0x3 line.long 0x00 "ACM0_EVORD2,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xAC++0x3 line.long 0x00 "ACM0_EVORD3,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xB0++0x3 line.long 0x00 "ACM0_EVORD4,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xB4++0x3 line.long 0x00 "ACM0_EVORD5,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xB8++0x3 line.long 0x00 "ACM0_EVORD6,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xBC++0x3 line.long 0x00 "ACM0_EVORD7,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xC0++0x3 line.long 0x00 "ACM0_EVORD8,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xC4++0x3 line.long 0x00 "ACM0_EVORD9,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xC8++0x3 line.long 0x00 "ACM0_EVORD10,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xCC++0x3 line.long 0x00 "ACM0_EVORD11,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xD0++0x3 line.long 0x00 "ACM0_EVORD12,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xD4++0x3 line.long 0x00 "ACM0_EVORD13,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xD8++0x3 line.long 0x00 "ACM0_EVORD14,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xDC++0x3 line.long 0x00 "ACM0_EVORD15,ACM0 Event N Order Register" bitfld.long 0x00 17. " EVSTAT ,Event Status" "0,1" bitfld.long 0x00 16. " MEVSTAT ,Missed Event Status" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ORD ,Order of Event Completion" group.long 0xE8++0x3 line.long 0x00 "ACM0_TMR0,ACM0 Timer 0 Register" group.long 0xEC++0x3 line.long 0x00 "ACM0_TMR1,ACM0 Timer 1 Register" tree.end tree "ARM_DBG" base ad:0x31120000 width 20. group.long 0x0++0x3 line.long 0x00 "ARMDBG0_DIDR,ARMDBG0 Debug ID Register." group.long 0x18++0x3 line.long 0x00 "ARMDBG0_WFAR,ARMDBG0 The Watchpoint Fault Address Register." group.long 0x1C++0x3 line.long 0x00 "ARMDBG0_VCR,ARMDBG0 Vector Catch Register." group.long 0x24++0x3 line.long 0x00 "ARMDBG0_ECR,ARMDBG0 Event Catch Register." group.long 0x28++0x3 line.long 0x00 "ARMDBG0_DSCCR,ARMDBG0 Debug State Cache Control Register." group.long 0x2C++0x3 line.long 0x00 "ARMDBG0_DSMCR,ARMDBG0 Debug State MMU Control Register." group.long 0x80++0x3 line.long 0x00 "ARMDBG0_DTRRX,ARMDBG0 Read Data Transfer Register." group.long 0x84++0x3 line.long 0x00 "ARMDBG0_ITR,ARMDBG0 Instruction Transfer Register." group.long 0x88++0x3 line.long 0x00 "ARMDBG0_DSCR,ARMDBG0 Debug Status and Control Register." group.long 0x8C++0x3 line.long 0x00 "ARMDBG0_DTRTX,ARMDBG0 Write Data Transfer Register." group.long 0x90++0x3 line.long 0x00 "ARMDBG0_DRCR,ARMDBG0 Debug Run Control Register." group.long 0xA0++0x3 line.long 0x00 "ARMDBG0_PCSR,ARMDBG0 Program Counter Sampling Register." group.long 0xA4++0x3 line.long 0x00 "ARMDBG0_CIDSR,ARMDBG0 Context ID Sampling Register." group.long 0x100++0x3 line.long 0x00 "ARMDBG0_BVR0,ARMDBG0 Breakpoint Value Register 0." group.long 0x104++0x3 line.long 0x00 "ARMDBG0_BVR1,ARMDBG0 Breakpoint Value Register 1." group.long 0x108++0x3 line.long 0x00 "ARMDBG0_BVR2,ARMDBG0 Breakpoint Value Register 2." group.long 0x140++0x3 line.long 0x00 "ARMDBG0_BCR0,ARMDBG0 Breakpoint Control Register 0." group.long 0x144++0x3 line.long 0x00 "ARMDBG0_BCR1,ARMDBG0 Breakpoint Control Register 1." group.long 0x148++0x3 line.long 0x00 "ARMDBG0_BCR2,ARMDBG0 Breakpoint Control Register 2." group.long 0x180++0x3 line.long 0x00 "ARMDBG0_WVR0,ARMDBG0 Watchpoint Value Register 0." group.long 0x184++0x3 line.long 0x00 "ARMDBG0_WVR1,ARMDBG0 Watchpoint Value Register 1." group.long 0x1C0++0x3 line.long 0x00 "ARMDBG0_WCR0,ARMDBG0 Watchpoint Control Register 0." group.long 0x1C4++0x3 line.long 0x00 "ARMDBG0_WCR1,ARMDBG0 Watchpoint Control Register 1." group.long 0x300++0x3 line.long 0x00 "ARMDBG0_OSLAR,ARMDBG0 Operating System Lock Access Register." group.long 0x304++0x3 line.long 0x00 "ARMDBG0_OSLSR,ARMDBG0 Operating System Lock Status Register." group.long 0x310++0x3 line.long 0x00 "ARMDBG0_PRCR,ARMDBG0 Device Powerdown and Reset Control Register." group.long 0x314++0x3 line.long 0x00 "ARMDBG0_PRSR,ARMDBG0 Device Powerdown and Reset Status Register." group.long 0xD00++0x3 line.long 0x00 "ARMDBG0_MIDR,ARMDBG0 Main ID Register." group.long 0xD04++0x3 line.long 0x00 "ARMDBG0_CTR,ARMDBG0 Cache Type Register." group.long 0xD08++0x3 line.long 0x00 "ARMDBG0_TCMTR,ARMDBG0 TCM Type Register." group.long 0xD0C++0x3 line.long 0x00 "ARMDBG0_TLBTR,ARMDBG0 TCM Type Register." group.long 0xD10++0x3 line.long 0x00 "ARMDBG0_MPUIR,ARMDBG0 MPU Type Register (alias of MIDR in VMSA)." group.long 0xD14++0x3 line.long 0x00 "ARMDBG0_MPIDR,ARMDBG0 Multiprocessor Affinity Register." group.long 0xD18++0x3 line.long 0x00 "ARMDBG0_MIDRALIAS1,ARMDBG0 Main ID Register (alias at 0xd18)." group.long 0xD1C++0x3 line.long 0x00 "ARMDBG0_MIDRALIAS2,ARMDBG0 Main ID Register (alias at 0xd1c)." group.long 0xD20++0x3 line.long 0x00 "ARMDBG0_ID_PFR0,ARMDBG0 Processor Feature Register 0." group.long 0xD24++0x3 line.long 0x00 "ARMDBG0_ID_PFR1,ARMDBG0 Processor Feature Register 1." group.long 0xD28++0x3 line.long 0x00 "ARMDBG0_ID_DFR0,ARMDBG0 Debug Feature Register 0." group.long 0xD2C++0x3 line.long 0x00 "ARMDBG0_ID_AFR0,ARMDBG0 Auxiliary Feature Register 0." group.long 0xD30++0x3 line.long 0x00 "ARMDBG0_ID_MMFR0,ARMDBG0 Memory Model Feature Register 0." group.long 0xD34++0x3 line.long 0x00 "ARMDBG0_ID_MMFR1,ARMDBG0 Memory Model Feature Register 1." group.long 0xD38++0x3 line.long 0x00 "ARMDBG0_ID_MMFR2,ARMDBG0 Memory Model Feature Register 2." group.long 0xD3C++0x3 line.long 0x00 "ARMDBG0_ID_MMFR3,ARMDBG0 Memory Model Feature Register 3." group.long 0xD40++0x3 line.long 0x00 "ARMDBG0_ID_ISAR0,ARMDBG0 ISA Feature Register 0." group.long 0xD44++0x3 line.long 0x00 "ARMDBG0_ID_ISAR1,ARMDBG0 ISA Feature Register 1." group.long 0xD48++0x3 line.long 0x00 "ARMDBG0_ID_ISAR2,ARMDBG0 ISA Feature Register 2." group.long 0xD4C++0x3 line.long 0x00 "ARMDBG0_ID_ISAR3,ARMDBG0 ISA Feature Register 3." group.long 0xD50++0x3 line.long 0x00 "ARMDBG0_ID_ISAR4,ARMDBG0 ISA Feature Register 4." group.long 0xD54++0x3 line.long 0x00 "ARMDBG0_ID_ISAR5,ARMDBG0 ISA Feature Register 5." group.long 0xEF8++0x3 line.long 0x00 "ARMDBG0_ITMISCOUT,ARMDBG0 Miscellaneous Outputs Integration Register." group.long 0xEFC++0x3 line.long 0x00 "ARMDBG0_ITMISCIN,ARMDBG0 Miscellaneous Inputs Integration Register." group.long 0xF00++0x3 line.long 0x00 "ARMDBG0_ITCTRL,ARMDBG0 Integration Mode Control Register." group.long 0xFA0++0x3 line.long 0x00 "ARMDBG0_CLAIMSET,ARMDBG0 Claim Tag Set Register." group.long 0xFA4++0x3 line.long 0x00 "ARMDBG0_CLAIMCLR,ARMDBG0 Claim Tag Clear Register." group.long 0xFB0++0x3 line.long 0x00 "ARMDBG0_LOCKACCESS,ARMDBG0 Lock Access Register." group.long 0xFB4++0x3 line.long 0x00 "ARMDBG0_LOCKSTATUS,ARMDBG0 Lock Status Register." group.long 0xFB8++0x3 line.long 0x00 "ARMDBG0_AUTHSTATUS,ARMDBG0 Authentication Status Register." group.long 0xFC8++0x3 line.long 0x00 "ARMDBG0_DEVID,ARMDBG0 Device Identifier." group.long 0xFCC++0x3 line.long 0x00 "ARMDBG0_DEVTYPE,ARMDBG0 Device Type Register." group.long 0xFD0++0x3 line.long 0x00 "ARMDBG0_PIR4,ARMDBG0 Peripheral ID Register 4." group.long 0xFE0++0x3 line.long 0x00 "ARMDBG0_PIR0,ARMDBG0 Peripheral ID Register 0." group.long 0xFE4++0x3 line.long 0x00 "ARMDBG0_PIR1,ARMDBG0 Peripheral ID Register 1." group.long 0xFE8++0x3 line.long 0x00 "ARMDBG0_PIR2,ARMDBG0 Peripheral ID Register 2." group.long 0xFEC++0x3 line.long 0x00 "ARMDBG0_PIR3,ARMDBG0 Peripheral ID Register 3." group.long 0xFF0++0x3 line.long 0x00 "ARMDBG0_CIR0,ARMDBG0 Component ID Register 0." group.long 0xFF4++0x3 line.long 0x00 "ARMDBG0_CIR1,ARMDBG0 Component ID Register 1." group.long 0xFF8++0x3 line.long 0x00 "ARMDBG0_CIR2,ARMDBG0 Component ID Register 2." group.long 0xFFC++0x3 line.long 0x00 "ARMDBG0_CIR3,ARMDBG0 Component ID Register 3." tree.end tree "ARM_ETM" base ad:0x3112C000 width 22. group.long 0x0++0x3 line.long 0x00 "ARMETM0_CR,ARMETM0 Main Control Register" group.long 0x4++0x3 line.long 0x00 "ARMETM0_CCR,ARMETM0 Configuration Code Register" group.long 0x8++0x3 line.long 0x00 "ARMETM0_TRIGGER,ARMETM0 Trigger Event Register" group.long 0xC++0x3 line.long 0x00 "ARMETM0_ASICCTLR,ARMETM0 ASIC Control Register" group.long 0x10++0x3 line.long 0x00 "ARMETM0_SR,ARMETM0 Status Register" group.long 0x14++0x3 line.long 0x00 "ARMETM0_SCR,ARMETM0 System Configuration Register" group.long 0x18++0x3 line.long 0x00 "ARMETM0_TSSCR,ARMETM0 TraceEnable Start/Stop Control Register" group.long 0x1C++0x3 line.long 0x00 "ARMETM0_TECR2,ARMETM0 TraceEnable Control Register 2" group.long 0x20++0x3 line.long 0x00 "ARMETM0_TEEVR,ARMETM0 TraceEnable Event Register" group.long 0x24++0x3 line.long 0x00 "ARMETM0_TECR1,ARMETM0 TraceEnable Control Register 1" group.long 0x2C++0x3 line.long 0x00 "ARMETM0_FFLR,ARMETM0 FIFOFULL Level Register" group.long 0x30++0x3 line.long 0x00 "ARMETM0_VDEVR,ARMETM0 ViewData Event Register" group.long 0x34++0x3 line.long 0x00 "ARMETM0_VDCR1,ARMETM0 ViewData Control Register 1" group.long 0x3C++0x3 line.long 0x00 "ARMETM0_VDCR3,ARMETM0 ViewData Control Register 3" group.long 0x40++0x3 line.long 0x00 "ARMETM0_ACVR1,ARMETM0 Address Comparator Value Register 1" group.long 0x44++0x3 line.long 0x00 "ARMETM0_ACVR2,ARMETM0 Address Comparator Value Register 2" group.long 0x48++0x3 line.long 0x00 "ARMETM0_ACVR3,ARMETM0 Address Comparator Value Register 3" group.long 0x4C++0x3 line.long 0x00 "ARMETM0_ACVR4,ARMETM0 Address Comparator Value Register 4" group.long 0x50++0x3 line.long 0x00 "ARMETM0_ACVR5,ARMETM0 Address Comparator Value Register 5" group.long 0x54++0x3 line.long 0x00 "ARMETM0_ACVR6,ARMETM0 Address Comparator Value Register 6" group.long 0x58++0x3 line.long 0x00 "ARMETM0_ACVR7,ARMETM0 Address Comparator Value Register 7" group.long 0x5C++0x3 line.long 0x00 "ARMETM0_ACVR8,ARMETM0 Address Comparator Value Register 8" group.long 0x80++0x3 line.long 0x00 "ARMETM0_ACTR1,ARMETM0 Address Comparator Access Type Register 1" group.long 0x84++0x3 line.long 0x00 "ARMETM0_ACTR2,ARMETM0 Address Comparator Access Type Register 2" group.long 0x88++0x3 line.long 0x00 "ARMETM0_ACTR3,ARMETM0 Address Comparator Access Type Register 3" group.long 0x8C++0x3 line.long 0x00 "ARMETM0_ACTR4,ARMETM0 Address Comparator Access Type Registers 4" group.long 0x90++0x3 line.long 0x00 "ARMETM0_ACTR5,ARMETM0 Address Comparator Access Type Register 5" group.long 0x94++0x3 line.long 0x00 "ARMETM0_ACTR6,ARMETM0 Address Comparator Access Type Register 6" group.long 0x98++0x3 line.long 0x00 "ARMETM0_ACTR7,ARMETM0 Address Comparator Access Type Register 7" group.long 0x9C++0x3 line.long 0x00 "ARMETM0_ACTR8,ARMETM0 Address Comparator Access Type Register 8" group.long 0xC0++0x3 line.long 0x00 "ARMETM0_DCVR1,ARMETM0 Data Comparator Value Register 1" group.long 0xC8++0x3 line.long 0x00 "ARMETM0_DCVR3,ARMETM0 Data Comparator Value Register 3" group.long 0x100++0x3 line.long 0x00 "ARMETM0_DCMR1,ARMETM0 Data Comparator Mask Register 1" group.long 0x108++0x3 line.long 0x00 "ARMETM0_DCMR3,ARMETM0 Data Comparator Mask Register 3" group.long 0x140++0x3 line.long 0x00 "ARMETM0_CNTRLDVR1,ARMETM0 Counter Reload Value Register 1" group.long 0x144++0x3 line.long 0x00 "ARMETM0_CNTRLDVR2,ARMETM0 Counter Reload Value Register 2" group.long 0x150++0x3 line.long 0x00 "ARMETM0_CNTENR1,ARMETM0 Counter Enable Register 1" group.long 0x154++0x3 line.long 0x00 "ARMETM0_CNTENR2,ARMETM0 Counter Enable Register 2" group.long 0x160++0x3 line.long 0x00 "ARMETM0_CNTRLDEVR1,ARMETM0 Counter Reload Event Register 1" group.long 0x164++0x3 line.long 0x00 "ARMETM0_CNTRLDEVR2,ARMETM0 Counter Reload Event Register 2" group.long 0x170++0x3 line.long 0x00 "ARMETM0_CNTVR1,ARMETM0 Counter Value Register 1" group.long 0x174++0x3 line.long 0x00 "ARMETM0_CNTVR2,ARMETM0 Counter Value Register 2" group.long 0x180++0x3 line.long 0x00 "ARMETM0_SQ12EVR,ARMETM0 Sequencer State Transition 12 Event Register" group.long 0x184++0x3 line.long 0x00 "ARMETM0_SQ21EVR,ARMETM0 Sequencer State Transition 21 Event Register" group.long 0x188++0x3 line.long 0x00 "ARMETM0_SQ23EVR,ARMETM0 Sequencer State Transition 23 Event Register" group.long 0x18C++0x3 line.long 0x00 "ARMETM0_SQ31EVR,ARMETM0 Sequencer State Transition 31 Event Register" group.long 0x190++0x3 line.long 0x00 "ARMETM0_SQ32EVR,ARMETM0 Sequencer State Transition 32 Event Register" group.long 0x194++0x3 line.long 0x00 "ARMETM0_SQ13EVR,ARMETM0 Sequencer State Transition 13 Event Register" group.long 0x19C++0x3 line.long 0x00 "ARMETM0_SQR,ARMETM0 Current Sequencer State Register" group.long 0x1A0++0x3 line.long 0x00 "ARMETM0_EXTOUTEVR1,ARMETM0 External Output Event Register 1" group.long 0x1A4++0x3 line.long 0x00 "ARMETM0_EXTOUTEVR2,ARMETM0 External Output Event Register 2" group.long 0x1B0++0x3 line.long 0x00 "ARMETM0_CIDCVR,ARMETM0 Context ID Comparator Value Register" group.long 0x1BC++0x3 line.long 0x00 "ARMETM0_CIDCMR,ARMETM0 Context ID Comparator Mask Register" group.long 0x1E0++0x3 line.long 0x00 "ARMETM0_SYNCFR,ARMETM0 Synchronization Frequency Register" group.long 0x1E4++0x3 line.long 0x00 "ARMETM0_IDR,ARMETM0 ETM ID Register" group.long 0x1E8++0x3 line.long 0x00 "ARMETM0_CCER,ARMETM0 Configuration Code Extension Register" group.long 0x1EC++0x3 line.long 0x00 "ARMETM0_EXTINSELR,ARMETM0 Extended External Input Selection Register" group.long 0x1F8++0x3 line.long 0x00 "ARMETM0_TSEVR,ARMETM0 Timestamp Event Register" group.long 0x1FC++0x3 line.long 0x00 "ARMETM0_AUXCR,ARMETM0 Auxiliary Control Register" group.long 0x200++0x3 line.long 0x00 "ARMETM0_TRACEIDR,ARMETM0 CoreSight Trace ID Register" group.long 0x208++0x3 line.long 0x00 "ARMETM0_ETMAUXIDR,ARMETM0 Auxiliary ID Register" group.long 0x314++0x3 line.long 0x00 "ARMETM0_PDSR,ARMETM0 Power-Down Status Register" group.long 0xEDC++0x3 line.long 0x00 "ARMETM0_ITMISCOUT,ARMETM0 Miscellaneous Outputs Register" group.long 0xEE0++0x3 line.long 0x00 "ARMETM0_ITMISCIN,ARMETM0 Miscellaneous Inputs Register" group.long 0xEE8++0x3 line.long 0x00 "ARMETM0_ITTRIGGERREQ,ARMETM0 Trigger Request Register" group.long 0xEEC++0x3 line.long 0x00 "ARMETM0_ITATBDATA0,ARMETM0 ATB Data Register 0" group.long 0xEF0++0x3 line.long 0x00 "ARMETM0_ITATBCTR2,ARMETM0 ATB Control Register 2" group.long 0xEF4++0x3 line.long 0x00 "ARMETM0_ITATBCTR1,ARMETM0 ATB Control Register 1" group.long 0xEF8++0x3 line.long 0x00 "ARMETM0_ITATBCTR0,ARMETM0 ATB Control Register 0" group.long 0xF00++0x3 line.long 0x00 "ARMETM0_ITCTRL,ARMETM0 Integration Mode Control Register" group.long 0xFA0++0x3 line.long 0x00 "ARMETM0_CLAIMSET,ARMETM0 Claim Tag Set Register" group.long 0xFA4++0x3 line.long 0x00 "ARMETM0_CLAIMCLR,ARMETM0 Claim Tag Clear Register" group.long 0xFB0++0x3 line.long 0x00 "ARMETM0_LAR,ARMETM0 Lock Access Register" group.long 0xFB4++0x3 line.long 0x00 "ARMETM0_LSR,ARMETM0 Lock Status Register" group.long 0xFB8++0x3 line.long 0x00 "ARMETM0_AUTHSTATUS,ARMETM0 Authentication Status Register" group.long 0xFC8++0x3 line.long 0x00 "ARMETM0_DEVID,ARMETM0 Device Identifier" group.long 0xFCC++0x3 line.long 0x00 "ARMETM0_DEVTYPE,ARMETM0 Device Type Register" group.long 0xFD0++0x3 line.long 0x00 "ARMETM0_PIR4,ARMETM0 Peripheral ID Register 4" group.long 0xFD4++0x3 line.long 0x00 "ARMETM0_PIR5,ARMETM0 Peripheral ID Register 5" group.long 0xFD8++0x3 line.long 0x00 "ARMETM0_PIR6,ARMETM0 Peripheral ID Register 6" group.long 0xFDC++0x3 line.long 0x00 "ARMETM0_PIR7,ARMETM0 Peripheral ID Register 7" group.long 0xFE0++0x3 line.long 0x00 "ARMETM0_PIR0,ARMETM0 Peripheral ID Register 0" group.long 0xFE4++0x3 line.long 0x00 "ARMETM0_PIR1,ARMETM0 Peripheral ID Register 1" group.long 0xFE8++0x3 line.long 0x00 "ARMETM0_PIR2,ARMETM0 Peripheral ID Register 2" group.long 0xFEC++0x3 line.long 0x00 "ARMETM0_PIR3,ARMETM0 Peripheral ID Register 3" group.long 0xFF0++0x3 line.long 0x00 "ARMETM0_CIR0,ARMETM0 Component ID Register 0" group.long 0xFF4++0x3 line.long 0x00 "ARMETM0_CIR1,ARMETM0 Component ID Register 1" group.long 0xFF8++0x3 line.long 0x00 "ARMETM0_CIR2,ARMETM0 Component ID Register 2" group.long 0xFFC++0x3 line.long 0x00 "ARMETM0_CIR3,ARMETM0 Component ID Register 3" tree.end tree "ARM_PMU" base ad:0x31121000 width 22. group.long 0x0++0x3 line.long 0x00 "ARMPMU0_PMXEVCNTR0,ARMPMU0 PM0 Counter Register." group.long 0x4++0x3 line.long 0x00 "ARMPMU0_PMXEVCNTR1,ARMPMU0 PM1 Counter Register." group.long 0x7C++0x3 line.long 0x00 "ARMPMU0_PMCCNTR,ARMPMU0 Cycle Count Register." group.long 0x400++0x3 line.long 0x00 "ARMPMU0_PMXEVTYPER0,ARMPMU0 PM0 Event Type Register." group.long 0x404++0x3 line.long 0x00 "ARMPMU0_PMXEVTYPER1,ARMPMU0 PM0 Event Type Register." group.long 0x47C++0x3 line.long 0x00 "ARMPMU0_PMCCFILTR,ARMPMU0 Cycle Count Filter Control Register." group.long 0xC00++0x3 line.long 0x00 "ARMPMU0_PMCNTENSET,ARMPMU0 Count Enable Set Register." group.long 0xC20++0x3 line.long 0x00 "ARMPMU0_PMCNTENCLR,ARMPMU0 Count Enable Clear Register." group.long 0xC40++0x3 line.long 0x00 "ARMPMU0_PMINTENSET,ARMPMU0 Interrupt Enable Set Register." group.long 0xC60++0x3 line.long 0x00 "ARMPMU0_PMINTENCLR,ARMPMU0 Interrupt Enable Clear Register." group.long 0xC80++0x3 line.long 0x00 "ARMPMU0_PMOVSR,ARMPMU0 Overflow Flag Status Register." group.long 0xCA0++0x3 line.long 0x00 "ARMPMU0_PMSWINC,ARMPMU0 Software Increment Register." group.long 0xE00++0x3 line.long 0x00 "ARMPMU0_PMCFGR,ARMPMU0 Configuration Register." group.long 0xE04++0x3 line.long 0x00 "ARMPMU0_PMCR,ARMPMU0 Control Register." group.long 0xE08++0x3 line.long 0x00 "ARMPMU0_PMUSERENR,ARMPMU0 User Enable Register." group.long 0xE20++0x3 line.long 0x00 "ARMPMU0_PMCEID0,ARMPMU0 Common Event Identification Register 0." group.long 0xE24++0x3 line.long 0x00 "ARMPMU0_PMCEID1,ARMPMU0 Common Event Identification Register 1." group.long 0xFB0++0x3 line.long 0x00 "ARMPMU0_PMLAR,ARMPMU0 Lock Access Register." group.long 0xFB4++0x3 line.long 0x00 "ARMPMU0_PMLSR,ARMPMU0 Lock Status Register." group.long 0xFB8++0x3 line.long 0x00 "ARMPMU0_PMAUTHSTATUS,ARMPMU0 Authentication Status Register." group.long 0xFCC++0x3 line.long 0x00 "ARMPMU0_PMDEVTYPE,ARMPMU0 Device Type Register." group.long 0xFD0++0x3 line.long 0x00 "ARMPMU0_PIR4,ARMPMU0 Peripheral ID Register 4." group.long 0xFE0++0x3 line.long 0x00 "ARMPMU0_PIR0,ARMPMU0 Peripheral ID Register 0." group.long 0xFE4++0x3 line.long 0x00 "ARMPMU0_PIR1,ARMPMU0 Peripheral ID Register 1." group.long 0xFE8++0x3 line.long 0x00 "ARMPMU0_PIR2,ARMPMU0 Peripheral ID Register 2." group.long 0xFEC++0x3 line.long 0x00 "ARMPMU0_PIR3,ARMPMU0 Peripheral ID Register 3." group.long 0xFF0++0x3 line.long 0x00 "ARMPMU0_CIR0,ARMPMU0 Component ID Register 0." group.long 0xFF4++0x3 line.long 0x00 "ARMPMU0_CIR1,ARMPMU0 Component ID Register 1." group.long 0xFF8++0x3 line.long 0x00 "ARMPMU0_CIR2,ARMPMU0 Component ID Register 2." group.long 0xFFC++0x3 line.long 0x00 "ARMPMU0_CIR3,ARMPMU0 Component ID Register 3." tree.end tree "ARM_ROM" base ad:0x31110000 width 20. group.long 0x0++0x3 line.long 0x00 "ARMROM0_ROMENTRY00,ARMROM0 ROM Entry 00" group.long 0x4++0x3 line.long 0x00 "ARMROM0_ROMENTRY01,ARMROM0 ROM Entry 01" group.long 0x8++0x3 line.long 0x00 "ARMROM0_ROMENTRY02,ARMROM0 ROM Entry 02" group.long 0xC++0x3 line.long 0x00 "ARMROM0_ROMENTRY03,ARMROM0 ROM Entry 03" group.long 0x10++0x3 line.long 0x00 "ARMROM0_ROMENTRY04,ARMROM0 ROM Entry 04" group.long 0x14++0x3 line.long 0x00 "ARMROM0_ROMENTRY05,ARMROM0 ROM Entry 05" group.long 0x18++0x3 line.long 0x00 "ARMROM0_ROMENTRY06,ARMROM0 ROM Entry 06" group.long 0x1C++0x3 line.long 0x00 "ARMROM0_ROMENTRY07,ARMROM0 ROM Entry 07" group.long 0x20++0x3 line.long 0x00 "ARMROM0_ROMENTRY08,ARMROM0 ROM Entry 08" group.long 0x24++0x3 line.long 0x00 "ARMROM0_ROMENTRY09,ARMROM0 ROM Entry 09" group.long 0x28++0x3 line.long 0x00 "ARMROM0_ROMENTRY10,ARMROM0 ROM Entry 10" group.long 0x2C++0x3 line.long 0x00 "ARMROM0_ROMENTRY11,ARMROM0 ROM Entry 11" group.long 0x30++0x3 line.long 0x00 "ARMROM0_ROMENTRY12,ARMROM0 ROM Entry 12" group.long 0x34++0x3 line.long 0x00 "ARMROM0_ROMENTRY13,ARMROM0 ROM Entry 13" group.long 0x38++0x3 line.long 0x00 "ARMROM0_ROMENTRY14,ARMROM0 ROM Entry 14" group.long 0x3C++0x3 line.long 0x00 "ARMROM0_ROMENTRY15,ARMROM0 ROM Entry 15" tree.end tree "ASRC (Asynchronous Sample Rate Converter)" tree "ASRC0" base ad:0x310C9240 width 13. group.long 0x0++0x3 line.long 0x00 "ASRC0_CTL01,ASRC0 Control Register for ASRC 0 and 1" bitfld.long 0x00 31. " EN1 ,Enable SRC 1" "0,1" bitfld.long 0x00 30. " MPHASE1 ,Matched-phase Mode 1" "0,1" bitfld.long 0x00 28.--29. " LENOUT1 ,Length Output 1" "0,1,2,3" bitfld.long 0x00 26.--27. " SMODEOUT1 ,Serial Mode Output 1" "0,1,2,3" newline bitfld.long 0x00 25. " DITHER1 ,Dither Enable 1" "0,1" bitfld.long 0x00 24. " SOFTMUTE1 ,Soft Mute 1" "0,1" bitfld.long 0x00 22.--23. " DEEMPHASIS1 ,De-emphasize Audio 1" "0,1,2,3" bitfld.long 0x00 21. " BYP1 ,Bypass 1" "0,1" newline bitfld.long 0x00 18.--20. " SMODEIN1 ,Serial Mode Input 1" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17. " AUTOMUTE1 ,Auto Hard Mute 1" "0,1" bitfld.long 0x00 16. " HARDMUTE1 ,Hard Mute 1" "0,1" bitfld.long 0x00 15. " EN0 ,Enable SRC 0" "0,1" newline bitfld.long 0x00 14. " MPHASE0 ,Matched-phase Mode 0" "0,1" bitfld.long 0x00 12.--13. " LENOUT0 ,Length Output 0" "0,1,2,3" bitfld.long 0x00 10.--11. " SMODEOUT0 ,Serial Mode Output 0" "0,1,2,3" bitfld.long 0x00 9. " DITHER0 ,Dither Enable 0" "0,1" newline bitfld.long 0x00 8. " SOFTMUTE0 ,Soft Mute 0" "0,1" bitfld.long 0x00 6.--7. " DEEMPHASIS0 ,De-emphasize Audio 0" "0,1,2,3" bitfld.long 0x00 5. " BYP0 ,Bypass 0" "0,1" bitfld.long 0x00 2.--4. " SMODEIN0 ,Serial Mode Input 0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 1. " AUTOMUTE0 ,Auto Hard Mute 0" "0,1" bitfld.long 0x00 0. " HARDMUTE0 ,Hard Mute 0" "0,1" group.long 0x4++0x3 line.long 0x00 "ASRC0_CTL23,ASRC0 Control Register for ASRC 2 and 3" bitfld.long 0x00 31. " EN3 ,Enable SRC 3" "0,1" bitfld.long 0x00 30. " MPHASE3 ,Matched-phase Mode 3" "0,1" bitfld.long 0x00 28.--29. " LENOUT3 ,Length Output 3" "0,1,2,3" bitfld.long 0x00 26.--27. " SMODEOUT3 ,Serial Mode Output 3" "0,1,2,3" newline bitfld.long 0x00 25. " DITHER3 ,Dither Enable 3" "0,1" bitfld.long 0x00 24. " SOFTMUTE3 ,Soft Mute 3" "0,1" bitfld.long 0x00 22.--23. " DEEMPHASIS3 ,De-emphasize Audio 3" "0,1,2,3" bitfld.long 0x00 21. " BYP3 ,Bypass 3" "0,1" newline bitfld.long 0x00 18.--20. " SMODEIN3 ,Serial Mode Input 3" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17. " AUTOMUTE3 ,Auto Hard Mute 3" "0,1" bitfld.long 0x00 16. " HARDMUTE3 ,Hard Mute 3" "0,1" bitfld.long 0x00 15. " EN2 ,Enable SRC 2" "0,1" newline bitfld.long 0x00 14. " MPHASE2 ,Matched-phase Mode 2" "0,1" bitfld.long 0x00 12.--13. " LENOUT2 ,Length Output 2" "0,1,2,3" bitfld.long 0x00 10.--11. " SMODEOUT2 ,Serial Mode Output 2" "0,1,2,3" bitfld.long 0x00 9. " DITHER2 ,Dither Enable 2" "0,1" newline bitfld.long 0x00 8. " SOFTMUTE2 ,Soft Mute 2" "0,1" bitfld.long 0x00 6.--7. " DEEMPHASIS2 ,De-emphasize Audio 2" "0,1,2,3" bitfld.long 0x00 5. " BYP2 ,Bypass 2" "0,1" bitfld.long 0x00 2.--4. " SMODEIN2 ,Serial Mode Input 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 1. " AUTOMUTE2 ,Auto Hard Mute 2" "0,1" bitfld.long 0x00 0. " HARDMUTE2 ,Hard Mute 2" "0,1" group.long 0x8++0x3 line.long 0x00 "ASRC0_MUTE,ASRC0 Mute Register" bitfld.long 0x00 3. " MUTE3 ,Mute ASRC3" "0,1" bitfld.long 0x00 2. " MUTE2 ,Mute ASRC2" "0,1" bitfld.long 0x00 1. " MUTE1 ,Mute ASRC1" "0,1" bitfld.long 0x00 0. " MUTE0 ,Mute ASRC0" "0,1" group.long 0x20++0x3 line.long 0x00 "ASRC0_RAT01,ASRC0 Ratio Register for ASRC 0 and 1" bitfld.long 0x00 31. " MUTEOUT1 ,Mute Status for ASRC1" "0,1" hexmask.long.word 0x00 16.--30. 1. " RATIO1 ,Sampling Ratio of Frame Syncs for ASRC1" bitfld.long 0x00 15. " MUTEOUT0 ,Mute Status for ASRC0" "0,1" hexmask.long.word 0x00 0.--14. 1. " RATIO0 ,Sampling Ratio of Frame Syncs for ASRC0" group.long 0x24++0x3 line.long 0x00 "ASRC0_RAT23,ASRC0 Ratio Register for ASRC 2 and 3" bitfld.long 0x00 31. " MUTEOUT3 ,Mute Status for ASRC3" "0,1" hexmask.long.word 0x00 16.--30. 1. " RATIO3 ,Sampling Ratio of Frame Syncs for ASRC3" bitfld.long 0x00 15. " MUTEOUT2 ,Mute Status for ASRC2" "0,1" hexmask.long.word 0x00 0.--14. 1. " RATIO2 ,Sampling Ratio of Frame Syncs for ASRC2" tree.end tree "ASRC1" base ad:0x310CB240 width 13. group.long 0x0++0x3 line.long 0x00 "ASRC1_CTL01,ASRC1 Control Register for ASRC 0 and 1" bitfld.long 0x00 31. " EN1 ,Enable SRC 1" "0,1" bitfld.long 0x00 30. " MPHASE1 ,Matched-phase Mode 1" "0,1" bitfld.long 0x00 28.--29. " LENOUT1 ,Length Output 1" "0,1,2,3" bitfld.long 0x00 26.--27. " SMODEOUT1 ,Serial Mode Output 1" "0,1,2,3" newline bitfld.long 0x00 25. " DITHER1 ,Dither Enable 1" "0,1" bitfld.long 0x00 24. " SOFTMUTE1 ,Soft Mute 1" "0,1" bitfld.long 0x00 22.--23. " DEEMPHASIS1 ,De-emphasize Audio 1" "0,1,2,3" bitfld.long 0x00 21. " BYP1 ,Bypass 1" "0,1" newline bitfld.long 0x00 18.--20. " SMODEIN1 ,Serial Mode Input 1" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17. " AUTOMUTE1 ,Auto Hard Mute 1" "0,1" bitfld.long 0x00 16. " HARDMUTE1 ,Hard Mute 1" "0,1" bitfld.long 0x00 15. " EN0 ,Enable SRC 0" "0,1" newline bitfld.long 0x00 14. " MPHASE0 ,Matched-phase Mode 0" "0,1" bitfld.long 0x00 12.--13. " LENOUT0 ,Length Output 0" "0,1,2,3" bitfld.long 0x00 10.--11. " SMODEOUT0 ,Serial Mode Output 0" "0,1,2,3" bitfld.long 0x00 9. " DITHER0 ,Dither Enable 0" "0,1" newline bitfld.long 0x00 8. " SOFTMUTE0 ,Soft Mute 0" "0,1" bitfld.long 0x00 6.--7. " DEEMPHASIS0 ,De-emphasize Audio 0" "0,1,2,3" bitfld.long 0x00 5. " BYP0 ,Bypass 0" "0,1" bitfld.long 0x00 2.--4. " SMODEIN0 ,Serial Mode Input 0" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 1. " AUTOMUTE0 ,Auto Hard Mute 0" "0,1" bitfld.long 0x00 0. " HARDMUTE0 ,Hard Mute 0" "0,1" group.long 0x4++0x3 line.long 0x00 "ASRC1_CTL23,ASRC1 Control Register for ASRC 2 and 3" bitfld.long 0x00 31. " EN3 ,Enable SRC 3" "0,1" bitfld.long 0x00 30. " MPHASE3 ,Matched-phase Mode 3" "0,1" bitfld.long 0x00 28.--29. " LENOUT3 ,Length Output 3" "0,1,2,3" bitfld.long 0x00 26.--27. " SMODEOUT3 ,Serial Mode Output 3" "0,1,2,3" newline bitfld.long 0x00 25. " DITHER3 ,Dither Enable 3" "0,1" bitfld.long 0x00 24. " SOFTMUTE3 ,Soft Mute 3" "0,1" bitfld.long 0x00 22.--23. " DEEMPHASIS3 ,De-emphasize Audio 3" "0,1,2,3" bitfld.long 0x00 21. " BYP3 ,Bypass 3" "0,1" newline bitfld.long 0x00 18.--20. " SMODEIN3 ,Serial Mode Input 3" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17. " AUTOMUTE3 ,Auto Hard Mute 3" "0,1" bitfld.long 0x00 16. " HARDMUTE3 ,Hard Mute 3" "0,1" bitfld.long 0x00 15. " EN2 ,Enable SRC 2" "0,1" newline bitfld.long 0x00 14. " MPHASE2 ,Matched-phase Mode 2" "0,1" bitfld.long 0x00 12.--13. " LENOUT2 ,Length Output 2" "0,1,2,3" bitfld.long 0x00 10.--11. " SMODEOUT2 ,Serial Mode Output 2" "0,1,2,3" bitfld.long 0x00 9. " DITHER2 ,Dither Enable 2" "0,1" newline bitfld.long 0x00 8. " SOFTMUTE2 ,Soft Mute 2" "0,1" bitfld.long 0x00 6.--7. " DEEMPHASIS2 ,De-emphasize Audio 2" "0,1,2,3" bitfld.long 0x00 5. " BYP2 ,Bypass 2" "0,1" bitfld.long 0x00 2.--4. " SMODEIN2 ,Serial Mode Input 2" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 1. " AUTOMUTE2 ,Auto Hard Mute 2" "0,1" bitfld.long 0x00 0. " HARDMUTE2 ,Hard Mute 2" "0,1" group.long 0x8++0x3 line.long 0x00 "ASRC1_MUTE,ASRC1 Mute Register" bitfld.long 0x00 3. " MUTE3 ,Mute ASRC3" "0,1" bitfld.long 0x00 2. " MUTE2 ,Mute ASRC2" "0,1" bitfld.long 0x00 1. " MUTE1 ,Mute ASRC1" "0,1" bitfld.long 0x00 0. " MUTE0 ,Mute ASRC0" "0,1" group.long 0x20++0x3 line.long 0x00 "ASRC1_RAT01,ASRC1 Ratio Register for ASRC 0 and 1" bitfld.long 0x00 31. " MUTEOUT1 ,Mute Status for ASRC1" "0,1" hexmask.long.word 0x00 16.--30. 1. " RATIO1 ,Sampling Ratio of Frame Syncs for ASRC1" bitfld.long 0x00 15. " MUTEOUT0 ,Mute Status for ASRC0" "0,1" hexmask.long.word 0x00 0.--14. 1. " RATIO0 ,Sampling Ratio of Frame Syncs for ASRC0" group.long 0x24++0x3 line.long 0x00 "ASRC1_RAT23,ASRC1 Ratio Register for ASRC 2 and 3" bitfld.long 0x00 31. " MUTEOUT3 ,Mute Status for ASRC3" "0,1" hexmask.long.word 0x00 16.--30. 1. " RATIO3 ,Sampling Ratio of Frame Syncs for ASRC3" bitfld.long 0x00 15. " MUTEOUT2 ,Mute Status for ASRC2" "0,1" hexmask.long.word 0x00 0.--14. 1. " RATIO2 ,Sampling Ratio of Frame Syncs for ASRC2" tree.end tree.end tree "CAN (Controller Area Network)" tree "CAN0" base ad:0x31000200 width 21. group.word 0x0++0x1 line.word 0x00 "CAN0_MC1,CAN0 Mailbox Configuration 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Enable/Disable" "0,1" group.word 0x4++0x1 line.word 0x00 "CAN0_MD1,CAN0 Mailbox Direction 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit/Receive" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit/Receive" "0,1" group.word 0x8++0x1 line.word 0x00 "CAN0_TRS1,CAN0 Transmission Request Set 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit Request" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit Request" "0,1" group.word 0xC++0x1 line.word 0x00 "CAN0_TRR1,CAN0 Transmission Request Reset 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit Abort" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit Abort" "0,1" group.word 0x10++0x1 line.word 0x00 "CAN0_TA1,CAN0 Transmission Acknowledge 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit Acknowledge" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit Acknowledge" "0,1" group.word 0x14++0x1 line.word 0x00 "CAN0_AA1,CAN0 Abort Acknowledge 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Abort Acknowledge" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Abort Acknowledge" "0,1" group.word 0x18++0x1 line.word 0x00 "CAN0_RMP1,CAN0 Receive Message Pending 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Message Pending" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Message Pending" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Message Pending" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Message Pending" "0,1" group.word 0x1C++0x1 line.word 0x00 "CAN0_RML1,CAN0 Receive Message Lost 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Message Lost" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Message Lost" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Message Lost" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Message Lost" "0,1" group.word 0x20++0x1 line.word 0x00 "CAN0_MBTIF1,CAN0 Mailbox Transmit Interrupt Flag 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit Interrupt Request Pending" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit Interrupt Request Pending" "0,1" group.word 0x24++0x1 line.word 0x00 "CAN0_MBRIF1,CAN0 Mailbox Receive Interrupt Flag 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Receive Interrupt Request Pending" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Receive Interrupt Request Pending" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Receive Interrupt Request Pending" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Receive Interrupt Request Pending" "0,1" group.word 0x28++0x1 line.word 0x00 "CAN0_MBIM1,CAN0 Mailbox Interrupt Mask 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" group.word 0x2C++0x1 line.word 0x00 "CAN0_RFH1,CAN0 Remote Frame Handling 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Remote Frame Handling Enable" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Remote Frame Handling Enable" "0,1" group.word 0x30++0x1 line.word 0x00 "CAN0_OPSS1,CAN0 Overwrite Protection/Single Shot Transmission 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Overwrite Protection Enable" "0,1" group.word 0x40++0x1 line.word 0x00 "CAN0_MC2,CAN0 Mailbox Configuration 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Enable/Disable" "0,1" group.word 0x44++0x1 line.word 0x00 "CAN0_MD2,CAN0 Mailbox Direction 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit/Receive" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit/Receive" "0,1" group.word 0x48++0x1 line.word 0x00 "CAN0_TRS2,CAN0 Transmission Request Set 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit Request" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit Request" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit Request" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit Request" "0,1" group.word 0x4C++0x1 line.word 0x00 "CAN0_TRR2,CAN0 Transmission Request Reset 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit Abort" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit Abort" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit Abort" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit Abort" "0,1" group.word 0x50++0x1 line.word 0x00 "CAN0_TA2,CAN0 Transmission Acknowledge 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit Acknowledge" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit Acknowledge" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit Acknowledge" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit Acknowledge" "0,1" group.word 0x54++0x1 line.word 0x00 "CAN0_AA2,CAN0 Abort Acknowledge 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Abort Acknowledge" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Abort Acknowledge" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Abort Acknowledge" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Abort Acknowledge" "0,1" group.word 0x58++0x1 line.word 0x00 "CAN0_RMP2,CAN0 Receive Message Pending 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Message Pending" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Message Pending" "0,1" group.word 0x5C++0x1 line.word 0x00 "CAN0_RML2,CAN0 Receive Message Lost 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Message Lost" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Message Lost" "0,1" group.word 0x60++0x1 line.word 0x00 "CAN0_MBTIF2,CAN0 Mailbox Transmit Interrupt Flag 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit Interrupt Pending" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit Interrupt Pending" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit Interrupt Pending" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit Interrupt Pending" "0,1" group.word 0x64++0x1 line.word 0x00 "CAN0_MBRIF2,CAN0 Mailbox Receive Interrupt Flag 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Receive Interrupt Pending" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Receive Interrupt Pending" "0,1" group.word 0x68++0x1 line.word 0x00 "CAN0_MBIM2,CAN0 Mailbox Interrupt Mask 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" group.word 0x6C++0x1 line.word 0x00 "CAN0_RFH2,CAN0 Remote Frame Handling 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Remote Frame Handling Enable" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Remote Frame Handling Enable" "0,1" group.word 0x70++0x1 line.word 0x00 "CAN0_OPSS2,CAN0 Overwrite Protection/Single Shot Transmission 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Overwrite Protection Enable" "0,1" group.word 0x80++0x1 line.word 0x00 "CAN0_CLK,CAN0 Clock Register" hexmask.word 0x00 0.--9. 1. " BRP ,Bit Rate Prescaler" group.word 0x84++0x1 line.word 0x00 "CAN0_TIMING,CAN0 Timing Register" bitfld.word 0x00 8.--9. " SJW ,Synchronization Jump Width" "0,1,2,3" bitfld.word 0x00 7. " SAM ,Sampling" "0,1" bitfld.word 0x00 4.--6. " TSEG2 ,Time Segment 2" "0,1,2,3,4,5,6,7" bitfld.word 0x00 0.--3. " TSEG1 ,Time Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x88++0x1 line.word 0x00 "CAN0_DBG,CAN0 Debug Register" bitfld.word 0x00 15. " CDE ,CAN Debug Mode Enable" "0,1" bitfld.word 0x00 5. " MRB ,Mode Read Back" "0,1" bitfld.word 0x00 4. " MAA ,Mode Auto Acknowledge" "0,1" bitfld.word 0x00 3. " DIL ,Disable Internal Loop" "0,1" newline bitfld.word 0x00 2. " DTO ,Disable Tx Output Pin" "0,1" bitfld.word 0x00 1. " DRI ,Disable Receive Input Pin" "0,1" bitfld.word 0x00 0. " DEC ,Disable Transmit and Receive Error Counters" "0,1" group.word 0x8C++0x1 line.word 0x00 "CAN0_STAT,CAN0 Status Register" bitfld.word 0x00 15. " REC ,Receive Mode" "0,1" bitfld.word 0x00 14. " TRM ,Transmit Mode" "0,1" bitfld.word 0x00 8.--12. " MBPTR ,Mailbox Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 7. " CCA ,CAN Configuration Mode Acknowledge" "0,1" newline bitfld.word 0x00 6. " CSA ,CAN Suspend Mode Acknowledge" "0,1" bitfld.word 0x00 3. " EBO ,CAN Error Bus Off Mode" "0,1" bitfld.word 0x00 2. " EP ,CAN Error Passive Mode" "0,1" bitfld.word 0x00 1. " WR ,CAN Receive Warning Flag" "0,1" newline bitfld.word 0x00 0. " WT ,CAN Transmit Warning Flag" "0,1" group.word 0x90++0x1 line.word 0x00 "CAN0_CEC,CAN0 Error Counter Register" hexmask.word.byte 0x00 8.--15. 1. " TXECNT ,Transmit Error Counter" hexmask.word.byte 0x00 0.--7. 1. " RXECNT ,Receive Error Counter" group.word 0x94++0x1 line.word 0x00 "CAN0_GIS,CAN0 Global CAN Interrupt Status Register" bitfld.word 0x00 10. " ADIS ,Access Denied Interrupt Status" "0,1" bitfld.word 0x00 8. " UCEIS ,Universal Counter Exceeded Interrupt Status" "0,1" bitfld.word 0x00 7. " RMLIS ,Receive Message Lost Interrupt Status" "0,1" bitfld.word 0x00 6. " AAIS ,Abort Acknowledge Interrupt Status" "0,1" newline bitfld.word 0x00 5. " UIAIS ,Unimplemented Address Interrupt Status" "0,1" bitfld.word 0x00 4. " WUIS ,Wake Up Interrupt Status" "0,1" bitfld.word 0x00 3. " BOIS ,Bus Off Interrupt Status" "0,1" bitfld.word 0x00 2. " EPIS ,Error Passive Interrupt Status" "0,1" newline bitfld.word 0x00 1. " EWRIS ,Error Warning Receive Interrupt Status" "0,1" bitfld.word 0x00 0. " EWTIS ,Error Warning Transmit Interrupt Status" "0,1" group.word 0x98++0x1 line.word 0x00 "CAN0_GIM,CAN0 Global CAN Interrupt Mask Register" bitfld.word 0x00 10. " ADIM ,Access Denied Interrupt Mask" "0,1" bitfld.word 0x00 8. " UCEIM ,Universal Counter Exceeded Interrupt Mask" "0,1" bitfld.word 0x00 7. " RMLIM ,Receive Message Lost Interrupt Mask" "0,1" bitfld.word 0x00 6. " AAIM ,Abort Acknowledge Interrupt Mask" "0,1" newline bitfld.word 0x00 5. " UIAIM ,Unimplemented Address Interrupt Mask" "0,1" bitfld.word 0x00 4. " WUIM ,Wake Up Interrupt Mask" "0,1" bitfld.word 0x00 3. " BOIM ,Bus Off Interrupt Mask" "0,1" bitfld.word 0x00 2. " EPIM ,Error Passive Interrupt Mask" "0,1" newline bitfld.word 0x00 1. " EWRIM ,Error Warning Receive Interrupt Mask" "0,1" bitfld.word 0x00 0. " EWTIM ,Error Warning Transmit Interrupt Mask" "0,1" group.word 0x9C++0x1 line.word 0x00 "CAN0_GIF,CAN0 Global CAN Interrupt Flag Register" bitfld.word 0x00 10. " ADIF ,Access Denied Interrupt Flag" "0,1" bitfld.word 0x00 8. " UCEIF ,Universal Counter Exceeded Interrupt Flag" "0,1" bitfld.word 0x00 7. " RMLIF ,Receive Message Lost Interrupt Flag" "0,1" bitfld.word 0x00 6. " AAIF ,Abort Acknowledge Interrupt Flag" "0,1" newline bitfld.word 0x00 5. " UIAIF ,Unimplemented Address Interrupt Flag" "0,1" bitfld.word 0x00 4. " WUIF ,Wake Up Interrupt Flag" "0,1" bitfld.word 0x00 3. " BOIF ,Bus Off Interrupt Flag" "0,1" bitfld.word 0x00 2. " EPIF ,Error Passive Interrupt Flag" "0,1" newline bitfld.word 0x00 1. " EWRIF ,Error Warning Receive Interrupt Flag" "0,1" bitfld.word 0x00 0. " EWTIF ,Error Warning Transmit Interrupt Flag" "0,1" group.word 0xA0++0x1 line.word 0x00 "CAN0_CTL,CAN0 CAN Master Control Register" bitfld.word 0x00 7. " CCR ,CAN Configuration Mode Request" "0,1" bitfld.word 0x00 6. " CSR ,CAN Suspend Mode Request" "0,1" bitfld.word 0x00 5. " SMR ,Sleep Mode Request" "0,1" bitfld.word 0x00 4. " WBA ,Wake Up on CAN Bus Activity" "0,1" newline bitfld.word 0x00 2. " ABO ,Auto Bus On" "0,1" bitfld.word 0x00 1. " DNM ,Device Net Mode" "0,1" bitfld.word 0x00 0. " SRS ,Software Reset" "0,1" group.word 0xA4++0x1 line.word 0x00 "CAN0_INT,CAN0 Interrupt Pending Register" bitfld.word 0x00 7. " CANRX ,Serial Input From Transceiver" "0,1" bitfld.word 0x00 6. " CANTX ,Serial Input To Transceiver" "0,1" bitfld.word 0x00 3. " SMACK ,Sleep Mode Acknowledge" "0,1" bitfld.word 0x00 2. " GIRQ ,Global CAN Interrupt Output" "0,1" newline bitfld.word 0x00 1. " MBTIRQ ,Mailbox Transmit Interrupt Output" "0,1" bitfld.word 0x00 0. " MBRIRQ ,Mailbox Receive Interrupt Output" "0,1" group.word 0xAC++0x1 line.word 0x00 "CAN0_MBTD,CAN0 Temporary Mailbox Disable Register" bitfld.word 0x00 7. " TDR ,Temporary Disable Request" "0,1" bitfld.word 0x00 6. " TDA ,Temporary Disable Acknowledge" "0,1" bitfld.word 0x00 0.--4. " TDPTR ,Temporary Disable Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.word 0xB0++0x1 line.word 0x00 "CAN0_EWR,CAN0 Error Counter Warning Level Register" hexmask.word.byte 0x00 8.--15. 1. " EWLTEC ,Transmit Error Warning Limit" hexmask.word.byte 0x00 0.--7. 1. " EWLREC ,Receive Error Warning Limit" group.word 0xB4++0x1 line.word 0x00 "CAN0_ESR,CAN0 Error Status Register" bitfld.word 0x00 7. " FER ,Form Error" "0,1" bitfld.word 0x00 6. " BEF ,Bit Error Flag" "0,1" bitfld.word 0x00 5. " SAO ,Stuck at Dominant" "0,1" bitfld.word 0x00 4. " CRCE ,CRC Error" "0,1" newline bitfld.word 0x00 3. " SER ,Stuff Bit Error" "0,1" bitfld.word 0x00 2. " ACKE ,Acknowledge Error" "0,1" group.word 0xC4++0x1 line.word 0x00 "CAN0_UCCNT,CAN0 Universal Counter Register" group.word 0xC8++0x1 line.word 0x00 "CAN0_UCRC,CAN0 Universal Counter Reload/Capture Register" group.word 0xCC++0x1 line.word 0x00 "CAN0_UCCNF,CAN0 Universal Counter Configuration Mode Register" bitfld.word 0x00 7. " UCE ,Universal Counter Enable" "0,1" bitfld.word 0x00 6. " UCCT ,Universal Counter CAN Trigger" "0,1" bitfld.word 0x00 5. " UCRC ,Universal Counter Reload/Clear" "0,1" bitfld.word 0x00 0.--3. " UCCNF ,Universal Counter Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x100++0x1 line.word 0x00 "CAN0_AM00L,CAN0 Acceptance Mask (L) Register" group.word 0x104++0x1 line.word 0x00 "CAN0_AM00H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x108++0x1 line.word 0x00 "CAN0_AM01L,CAN0 Acceptance Mask (L) Register" group.word 0x10C++0x1 line.word 0x00 "CAN0_AM01H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x110++0x1 line.word 0x00 "CAN0_AM02L,CAN0 Acceptance Mask (L) Register" group.word 0x114++0x1 line.word 0x00 "CAN0_AM02H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x118++0x1 line.word 0x00 "CAN0_AM03L,CAN0 Acceptance Mask (L) Register" group.word 0x11C++0x1 line.word 0x00 "CAN0_AM03H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x120++0x1 line.word 0x00 "CAN0_AM04L,CAN0 Acceptance Mask (L) Register" group.word 0x124++0x1 line.word 0x00 "CAN0_AM04H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x128++0x1 line.word 0x00 "CAN0_AM05L,CAN0 Acceptance Mask (L) Register" group.word 0x12C++0x1 line.word 0x00 "CAN0_AM05H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x130++0x1 line.word 0x00 "CAN0_AM06L,CAN0 Acceptance Mask (L) Register" group.word 0x134++0x1 line.word 0x00 "CAN0_AM06H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x138++0x1 line.word 0x00 "CAN0_AM07L,CAN0 Acceptance Mask (L) Register" group.word 0x13C++0x1 line.word 0x00 "CAN0_AM07H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x140++0x1 line.word 0x00 "CAN0_AM08L,CAN0 Acceptance Mask (L) Register" group.word 0x144++0x1 line.word 0x00 "CAN0_AM08H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x148++0x1 line.word 0x00 "CAN0_AM09L,CAN0 Acceptance Mask (L) Register" group.word 0x14C++0x1 line.word 0x00 "CAN0_AM09H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x150++0x1 line.word 0x00 "CAN0_AM10L,CAN0 Acceptance Mask (L) Register" group.word 0x154++0x1 line.word 0x00 "CAN0_AM10H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x158++0x1 line.word 0x00 "CAN0_AM11L,CAN0 Acceptance Mask (L) Register" group.word 0x15C++0x1 line.word 0x00 "CAN0_AM11H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x160++0x1 line.word 0x00 "CAN0_AM12L,CAN0 Acceptance Mask (L) Register" group.word 0x164++0x1 line.word 0x00 "CAN0_AM12H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x168++0x1 line.word 0x00 "CAN0_AM13L,CAN0 Acceptance Mask (L) Register" group.word 0x16C++0x1 line.word 0x00 "CAN0_AM13H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x170++0x1 line.word 0x00 "CAN0_AM14L,CAN0 Acceptance Mask (L) Register" group.word 0x174++0x1 line.word 0x00 "CAN0_AM14H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x178++0x1 line.word 0x00 "CAN0_AM15L,CAN0 Acceptance Mask (L) Register" group.word 0x17C++0x1 line.word 0x00 "CAN0_AM15H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x180++0x1 line.word 0x00 "CAN0_AM16L,CAN0 Acceptance Mask (L) Register" group.word 0x184++0x1 line.word 0x00 "CAN0_AM16H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x188++0x1 line.word 0x00 "CAN0_AM17L,CAN0 Acceptance Mask (L) Register" group.word 0x18C++0x1 line.word 0x00 "CAN0_AM17H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x190++0x1 line.word 0x00 "CAN0_AM18L,CAN0 Acceptance Mask (L) Register" group.word 0x194++0x1 line.word 0x00 "CAN0_AM18H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x198++0x1 line.word 0x00 "CAN0_AM19L,CAN0 Acceptance Mask (L) Register" group.word 0x19C++0x1 line.word 0x00 "CAN0_AM19H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1A0++0x1 line.word 0x00 "CAN0_AM20L,CAN0 Acceptance Mask (L) Register" group.word 0x1A4++0x1 line.word 0x00 "CAN0_AM20H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1A8++0x1 line.word 0x00 "CAN0_AM21L,CAN0 Acceptance Mask (L) Register" group.word 0x1AC++0x1 line.word 0x00 "CAN0_AM21H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1B0++0x1 line.word 0x00 "CAN0_AM22L,CAN0 Acceptance Mask (L) Register" group.word 0x1B4++0x1 line.word 0x00 "CAN0_AM22H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1B8++0x1 line.word 0x00 "CAN0_AM23L,CAN0 Acceptance Mask (L) Register" group.word 0x1BC++0x1 line.word 0x00 "CAN0_AM23H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1C0++0x1 line.word 0x00 "CAN0_AM24L,CAN0 Acceptance Mask (L) Register" group.word 0x1C4++0x1 line.word 0x00 "CAN0_AM24H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1C8++0x1 line.word 0x00 "CAN0_AM25L,CAN0 Acceptance Mask (L) Register" group.word 0x1CC++0x1 line.word 0x00 "CAN0_AM25H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1D0++0x1 line.word 0x00 "CAN0_AM26L,CAN0 Acceptance Mask (L) Register" group.word 0x1D4++0x1 line.word 0x00 "CAN0_AM26H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1D8++0x1 line.word 0x00 "CAN0_AM27L,CAN0 Acceptance Mask (L) Register" group.word 0x1DC++0x1 line.word 0x00 "CAN0_AM27H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1E0++0x1 line.word 0x00 "CAN0_AM28L,CAN0 Acceptance Mask (L) Register" group.word 0x1E4++0x1 line.word 0x00 "CAN0_AM28H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1E8++0x1 line.word 0x00 "CAN0_AM29L,CAN0 Acceptance Mask (L) Register" group.word 0x1EC++0x1 line.word 0x00 "CAN0_AM29H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1F0++0x1 line.word 0x00 "CAN0_AM30L,CAN0 Acceptance Mask (L) Register" group.word 0x1F4++0x1 line.word 0x00 "CAN0_AM30H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1F8++0x1 line.word 0x00 "CAN0_AM31L,CAN0 Acceptance Mask (L) Register" group.word 0x1FC++0x1 line.word 0x00 "CAN0_AM31H,CAN0 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x200++0x1 line.word 0x00 "CAN0_MB00_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x204++0x1 line.word 0x00 "CAN0_MB00_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x208++0x1 line.word 0x00 "CAN0_MB00_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x20C++0x1 line.word 0x00 "CAN0_MB00_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x210++0x1 line.word 0x00 "CAN0_MB00_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x214++0x1 line.word 0x00 "CAN0_MB00_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x218++0x1 line.word 0x00 "CAN0_MB00_ID0,CAN0 Mailbox ID 0 Register" group.word 0x21C++0x1 line.word 0x00 "CAN0_MB00_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x220++0x1 line.word 0x00 "CAN0_MB01_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x224++0x1 line.word 0x00 "CAN0_MB01_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x228++0x1 line.word 0x00 "CAN0_MB01_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x22C++0x1 line.word 0x00 "CAN0_MB01_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x230++0x1 line.word 0x00 "CAN0_MB01_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x234++0x1 line.word 0x00 "CAN0_MB01_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x238++0x1 line.word 0x00 "CAN0_MB01_ID0,CAN0 Mailbox ID 0 Register" group.word 0x23C++0x1 line.word 0x00 "CAN0_MB01_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x240++0x1 line.word 0x00 "CAN0_MB02_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x244++0x1 line.word 0x00 "CAN0_MB02_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x248++0x1 line.word 0x00 "CAN0_MB02_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x24C++0x1 line.word 0x00 "CAN0_MB02_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x250++0x1 line.word 0x00 "CAN0_MB02_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x254++0x1 line.word 0x00 "CAN0_MB02_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x258++0x1 line.word 0x00 "CAN0_MB02_ID0,CAN0 Mailbox ID 0 Register" group.word 0x25C++0x1 line.word 0x00 "CAN0_MB02_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x260++0x1 line.word 0x00 "CAN0_MB03_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x264++0x1 line.word 0x00 "CAN0_MB03_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x268++0x1 line.word 0x00 "CAN0_MB03_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x26C++0x1 line.word 0x00 "CAN0_MB03_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x270++0x1 line.word 0x00 "CAN0_MB03_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x274++0x1 line.word 0x00 "CAN0_MB03_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x278++0x1 line.word 0x00 "CAN0_MB03_ID0,CAN0 Mailbox ID 0 Register" group.word 0x27C++0x1 line.word 0x00 "CAN0_MB03_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x280++0x1 line.word 0x00 "CAN0_MB04_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x284++0x1 line.word 0x00 "CAN0_MB04_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x288++0x1 line.word 0x00 "CAN0_MB04_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x28C++0x1 line.word 0x00 "CAN0_MB04_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x290++0x1 line.word 0x00 "CAN0_MB04_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x294++0x1 line.word 0x00 "CAN0_MB04_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x298++0x1 line.word 0x00 "CAN0_MB04_ID0,CAN0 Mailbox ID 0 Register" group.word 0x29C++0x1 line.word 0x00 "CAN0_MB04_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x2A0++0x1 line.word 0x00 "CAN0_MB05_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x2A4++0x1 line.word 0x00 "CAN0_MB05_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x2A8++0x1 line.word 0x00 "CAN0_MB05_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x2AC++0x1 line.word 0x00 "CAN0_MB05_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x2B0++0x1 line.word 0x00 "CAN0_MB05_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x2B4++0x1 line.word 0x00 "CAN0_MB05_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x2B8++0x1 line.word 0x00 "CAN0_MB05_ID0,CAN0 Mailbox ID 0 Register" group.word 0x2BC++0x1 line.word 0x00 "CAN0_MB05_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x2C0++0x1 line.word 0x00 "CAN0_MB06_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x2C4++0x1 line.word 0x00 "CAN0_MB06_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x2C8++0x1 line.word 0x00 "CAN0_MB06_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x2CC++0x1 line.word 0x00 "CAN0_MB06_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x2D0++0x1 line.word 0x00 "CAN0_MB06_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x2D4++0x1 line.word 0x00 "CAN0_MB06_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x2D8++0x1 line.word 0x00 "CAN0_MB06_ID0,CAN0 Mailbox ID 0 Register" group.word 0x2DC++0x1 line.word 0x00 "CAN0_MB06_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x2E0++0x1 line.word 0x00 "CAN0_MB07_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x2E4++0x1 line.word 0x00 "CAN0_MB07_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x2E8++0x1 line.word 0x00 "CAN0_MB07_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x2EC++0x1 line.word 0x00 "CAN0_MB07_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x2F0++0x1 line.word 0x00 "CAN0_MB07_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x2F4++0x1 line.word 0x00 "CAN0_MB07_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x2F8++0x1 line.word 0x00 "CAN0_MB07_ID0,CAN0 Mailbox ID 0 Register" group.word 0x2FC++0x1 line.word 0x00 "CAN0_MB07_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x300++0x1 line.word 0x00 "CAN0_MB08_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x304++0x1 line.word 0x00 "CAN0_MB08_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x308++0x1 line.word 0x00 "CAN0_MB08_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x30C++0x1 line.word 0x00 "CAN0_MB08_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x310++0x1 line.word 0x00 "CAN0_MB08_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x314++0x1 line.word 0x00 "CAN0_MB08_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x318++0x1 line.word 0x00 "CAN0_MB08_ID0,CAN0 Mailbox ID 0 Register" group.word 0x31C++0x1 line.word 0x00 "CAN0_MB08_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x320++0x1 line.word 0x00 "CAN0_MB09_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x324++0x1 line.word 0x00 "CAN0_MB09_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x328++0x1 line.word 0x00 "CAN0_MB09_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x32C++0x1 line.word 0x00 "CAN0_MB09_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x330++0x1 line.word 0x00 "CAN0_MB09_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x334++0x1 line.word 0x00 "CAN0_MB09_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x338++0x1 line.word 0x00 "CAN0_MB09_ID0,CAN0 Mailbox ID 0 Register" group.word 0x33C++0x1 line.word 0x00 "CAN0_MB09_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x340++0x1 line.word 0x00 "CAN0_MB10_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x344++0x1 line.word 0x00 "CAN0_MB10_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x348++0x1 line.word 0x00 "CAN0_MB10_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x34C++0x1 line.word 0x00 "CAN0_MB10_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x350++0x1 line.word 0x00 "CAN0_MB10_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x354++0x1 line.word 0x00 "CAN0_MB10_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x358++0x1 line.word 0x00 "CAN0_MB10_ID0,CAN0 Mailbox ID 0 Register" group.word 0x35C++0x1 line.word 0x00 "CAN0_MB10_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x360++0x1 line.word 0x00 "CAN0_MB11_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x364++0x1 line.word 0x00 "CAN0_MB11_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x368++0x1 line.word 0x00 "CAN0_MB11_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x36C++0x1 line.word 0x00 "CAN0_MB11_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x370++0x1 line.word 0x00 "CAN0_MB11_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x374++0x1 line.word 0x00 "CAN0_MB11_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x378++0x1 line.word 0x00 "CAN0_MB11_ID0,CAN0 Mailbox ID 0 Register" group.word 0x37C++0x1 line.word 0x00 "CAN0_MB11_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x380++0x1 line.word 0x00 "CAN0_MB12_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x384++0x1 line.word 0x00 "CAN0_MB12_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x388++0x1 line.word 0x00 "CAN0_MB12_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x38C++0x1 line.word 0x00 "CAN0_MB12_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x390++0x1 line.word 0x00 "CAN0_MB12_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x394++0x1 line.word 0x00 "CAN0_MB12_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x398++0x1 line.word 0x00 "CAN0_MB12_ID0,CAN0 Mailbox ID 0 Register" group.word 0x39C++0x1 line.word 0x00 "CAN0_MB12_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x3A0++0x1 line.word 0x00 "CAN0_MB13_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x3A4++0x1 line.word 0x00 "CAN0_MB13_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x3A8++0x1 line.word 0x00 "CAN0_MB13_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x3AC++0x1 line.word 0x00 "CAN0_MB13_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x3B0++0x1 line.word 0x00 "CAN0_MB13_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x3B4++0x1 line.word 0x00 "CAN0_MB13_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x3B8++0x1 line.word 0x00 "CAN0_MB13_ID0,CAN0 Mailbox ID 0 Register" group.word 0x3BC++0x1 line.word 0x00 "CAN0_MB13_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x3C0++0x1 line.word 0x00 "CAN0_MB14_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x3C4++0x1 line.word 0x00 "CAN0_MB14_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x3C8++0x1 line.word 0x00 "CAN0_MB14_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x3CC++0x1 line.word 0x00 "CAN0_MB14_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x3D0++0x1 line.word 0x00 "CAN0_MB14_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x3D4++0x1 line.word 0x00 "CAN0_MB14_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x3D8++0x1 line.word 0x00 "CAN0_MB14_ID0,CAN0 Mailbox ID 0 Register" group.word 0x3DC++0x1 line.word 0x00 "CAN0_MB14_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x3E0++0x1 line.word 0x00 "CAN0_MB15_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x3E4++0x1 line.word 0x00 "CAN0_MB15_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x3E8++0x1 line.word 0x00 "CAN0_MB15_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x3EC++0x1 line.word 0x00 "CAN0_MB15_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x3F0++0x1 line.word 0x00 "CAN0_MB15_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x3F4++0x1 line.word 0x00 "CAN0_MB15_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x3F8++0x1 line.word 0x00 "CAN0_MB15_ID0,CAN0 Mailbox ID 0 Register" group.word 0x3FC++0x1 line.word 0x00 "CAN0_MB15_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x400++0x1 line.word 0x00 "CAN0_MB16_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x404++0x1 line.word 0x00 "CAN0_MB16_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x408++0x1 line.word 0x00 "CAN0_MB16_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x40C++0x1 line.word 0x00 "CAN0_MB16_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x410++0x1 line.word 0x00 "CAN0_MB16_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x414++0x1 line.word 0x00 "CAN0_MB16_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x418++0x1 line.word 0x00 "CAN0_MB16_ID0,CAN0 Mailbox ID 0 Register" group.word 0x41C++0x1 line.word 0x00 "CAN0_MB16_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x420++0x1 line.word 0x00 "CAN0_MB17_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x424++0x1 line.word 0x00 "CAN0_MB17_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x428++0x1 line.word 0x00 "CAN0_MB17_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x42C++0x1 line.word 0x00 "CAN0_MB17_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x430++0x1 line.word 0x00 "CAN0_MB17_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x434++0x1 line.word 0x00 "CAN0_MB17_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x438++0x1 line.word 0x00 "CAN0_MB17_ID0,CAN0 Mailbox ID 0 Register" group.word 0x43C++0x1 line.word 0x00 "CAN0_MB17_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x440++0x1 line.word 0x00 "CAN0_MB18_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x444++0x1 line.word 0x00 "CAN0_MB18_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x448++0x1 line.word 0x00 "CAN0_MB18_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x44C++0x1 line.word 0x00 "CAN0_MB18_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x450++0x1 line.word 0x00 "CAN0_MB18_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x454++0x1 line.word 0x00 "CAN0_MB18_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x458++0x1 line.word 0x00 "CAN0_MB18_ID0,CAN0 Mailbox ID 0 Register" group.word 0x45C++0x1 line.word 0x00 "CAN0_MB18_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x460++0x1 line.word 0x00 "CAN0_MB19_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x464++0x1 line.word 0x00 "CAN0_MB19_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x468++0x1 line.word 0x00 "CAN0_MB19_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x46C++0x1 line.word 0x00 "CAN0_MB19_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x470++0x1 line.word 0x00 "CAN0_MB19_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x474++0x1 line.word 0x00 "CAN0_MB19_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x478++0x1 line.word 0x00 "CAN0_MB19_ID0,CAN0 Mailbox ID 0 Register" group.word 0x47C++0x1 line.word 0x00 "CAN0_MB19_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x480++0x1 line.word 0x00 "CAN0_MB20_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x484++0x1 line.word 0x00 "CAN0_MB20_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x488++0x1 line.word 0x00 "CAN0_MB20_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x48C++0x1 line.word 0x00 "CAN0_MB20_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x490++0x1 line.word 0x00 "CAN0_MB20_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x494++0x1 line.word 0x00 "CAN0_MB20_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x498++0x1 line.word 0x00 "CAN0_MB20_ID0,CAN0 Mailbox ID 0 Register" group.word 0x49C++0x1 line.word 0x00 "CAN0_MB20_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x4A0++0x1 line.word 0x00 "CAN0_MB21_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x4A4++0x1 line.word 0x00 "CAN0_MB21_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x4A8++0x1 line.word 0x00 "CAN0_MB21_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x4AC++0x1 line.word 0x00 "CAN0_MB21_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x4B0++0x1 line.word 0x00 "CAN0_MB21_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x4B4++0x1 line.word 0x00 "CAN0_MB21_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x4B8++0x1 line.word 0x00 "CAN0_MB21_ID0,CAN0 Mailbox ID 0 Register" group.word 0x4BC++0x1 line.word 0x00 "CAN0_MB21_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x4C0++0x1 line.word 0x00 "CAN0_MB22_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x4C4++0x1 line.word 0x00 "CAN0_MB22_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x4C8++0x1 line.word 0x00 "CAN0_MB22_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x4CC++0x1 line.word 0x00 "CAN0_MB22_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x4D0++0x1 line.word 0x00 "CAN0_MB22_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x4D4++0x1 line.word 0x00 "CAN0_MB22_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x4D8++0x1 line.word 0x00 "CAN0_MB22_ID0,CAN0 Mailbox ID 0 Register" group.word 0x4DC++0x1 line.word 0x00 "CAN0_MB22_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x4E0++0x1 line.word 0x00 "CAN0_MB23_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x4E4++0x1 line.word 0x00 "CAN0_MB23_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x4E8++0x1 line.word 0x00 "CAN0_MB23_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x4EC++0x1 line.word 0x00 "CAN0_MB23_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x4F0++0x1 line.word 0x00 "CAN0_MB23_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x4F4++0x1 line.word 0x00 "CAN0_MB23_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x4F8++0x1 line.word 0x00 "CAN0_MB23_ID0,CAN0 Mailbox ID 0 Register" group.word 0x4FC++0x1 line.word 0x00 "CAN0_MB23_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x500++0x1 line.word 0x00 "CAN0_MB24_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x504++0x1 line.word 0x00 "CAN0_MB24_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x508++0x1 line.word 0x00 "CAN0_MB24_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x50C++0x1 line.word 0x00 "CAN0_MB24_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x510++0x1 line.word 0x00 "CAN0_MB24_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x514++0x1 line.word 0x00 "CAN0_MB24_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x518++0x1 line.word 0x00 "CAN0_MB24_ID0,CAN0 Mailbox ID 0 Register" group.word 0x51C++0x1 line.word 0x00 "CAN0_MB24_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x520++0x1 line.word 0x00 "CAN0_MB25_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x524++0x1 line.word 0x00 "CAN0_MB25_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x528++0x1 line.word 0x00 "CAN0_MB25_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x52C++0x1 line.word 0x00 "CAN0_MB25_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x530++0x1 line.word 0x00 "CAN0_MB25_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x534++0x1 line.word 0x00 "CAN0_MB25_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x538++0x1 line.word 0x00 "CAN0_MB25_ID0,CAN0 Mailbox ID 0 Register" group.word 0x53C++0x1 line.word 0x00 "CAN0_MB25_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x540++0x1 line.word 0x00 "CAN0_MB26_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x544++0x1 line.word 0x00 "CAN0_MB26_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x548++0x1 line.word 0x00 "CAN0_MB26_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x54C++0x1 line.word 0x00 "CAN0_MB26_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x550++0x1 line.word 0x00 "CAN0_MB26_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x554++0x1 line.word 0x00 "CAN0_MB26_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x558++0x1 line.word 0x00 "CAN0_MB26_ID0,CAN0 Mailbox ID 0 Register" group.word 0x55C++0x1 line.word 0x00 "CAN0_MB26_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x560++0x1 line.word 0x00 "CAN0_MB27_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x564++0x1 line.word 0x00 "CAN0_MB27_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x568++0x1 line.word 0x00 "CAN0_MB27_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x56C++0x1 line.word 0x00 "CAN0_MB27_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x570++0x1 line.word 0x00 "CAN0_MB27_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x574++0x1 line.word 0x00 "CAN0_MB27_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x578++0x1 line.word 0x00 "CAN0_MB27_ID0,CAN0 Mailbox ID 0 Register" group.word 0x57C++0x1 line.word 0x00 "CAN0_MB27_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x580++0x1 line.word 0x00 "CAN0_MB28_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x584++0x1 line.word 0x00 "CAN0_MB28_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x588++0x1 line.word 0x00 "CAN0_MB28_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x58C++0x1 line.word 0x00 "CAN0_MB28_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x590++0x1 line.word 0x00 "CAN0_MB28_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x594++0x1 line.word 0x00 "CAN0_MB28_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x598++0x1 line.word 0x00 "CAN0_MB28_ID0,CAN0 Mailbox ID 0 Register" group.word 0x59C++0x1 line.word 0x00 "CAN0_MB28_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x5A0++0x1 line.word 0x00 "CAN0_MB29_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x5A4++0x1 line.word 0x00 "CAN0_MB29_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x5A8++0x1 line.word 0x00 "CAN0_MB29_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x5AC++0x1 line.word 0x00 "CAN0_MB29_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x5B0++0x1 line.word 0x00 "CAN0_MB29_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x5B4++0x1 line.word 0x00 "CAN0_MB29_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x5B8++0x1 line.word 0x00 "CAN0_MB29_ID0,CAN0 Mailbox ID 0 Register" group.word 0x5BC++0x1 line.word 0x00 "CAN0_MB29_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x5C0++0x1 line.word 0x00 "CAN0_MB30_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x5C4++0x1 line.word 0x00 "CAN0_MB30_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x5C8++0x1 line.word 0x00 "CAN0_MB30_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x5CC++0x1 line.word 0x00 "CAN0_MB30_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x5D0++0x1 line.word 0x00 "CAN0_MB30_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x5D4++0x1 line.word 0x00 "CAN0_MB30_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x5D8++0x1 line.word 0x00 "CAN0_MB30_ID0,CAN0 Mailbox ID 0 Register" group.word 0x5DC++0x1 line.word 0x00 "CAN0_MB30_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x5E0++0x1 line.word 0x00 "CAN0_MB31_DATA0,CAN0 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x5E4++0x1 line.word 0x00 "CAN0_MB31_DATA1,CAN0 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x5E8++0x1 line.word 0x00 "CAN0_MB31_DATA2,CAN0 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x5EC++0x1 line.word 0x00 "CAN0_MB31_DATA3,CAN0 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x5F0++0x1 line.word 0x00 "CAN0_MB31_LENGTH,CAN0 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x5F4++0x1 line.word 0x00 "CAN0_MB31_TIMESTAMP,CAN0 Mailbox Time Stamp Register" group.word 0x5F8++0x1 line.word 0x00 "CAN0_MB31_ID0,CAN0 Mailbox ID 0 Register" group.word 0x5FC++0x1 line.word 0x00 "CAN0_MB31_ID1,CAN0 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" tree.end tree "CAN1" base ad:0x31000A00 width 21. group.word 0x0++0x1 line.word 0x00 "CAN1_MC1,CAN1 Mailbox Configuration 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Enable/Disable" "0,1" group.word 0x4++0x1 line.word 0x00 "CAN1_MD1,CAN1 Mailbox Direction 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit/Receive" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit/Receive" "0,1" group.word 0x8++0x1 line.word 0x00 "CAN1_TRS1,CAN1 Transmission Request Set 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit Request" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit Request" "0,1" group.word 0xC++0x1 line.word 0x00 "CAN1_TRR1,CAN1 Transmission Request Reset 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit Abort" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit Abort" "0,1" group.word 0x10++0x1 line.word 0x00 "CAN1_TA1,CAN1 Transmission Acknowledge 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit Acknowledge" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit Acknowledge" "0,1" group.word 0x14++0x1 line.word 0x00 "CAN1_AA1,CAN1 Abort Acknowledge 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Abort Acknowledge" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Abort Acknowledge" "0,1" group.word 0x18++0x1 line.word 0x00 "CAN1_RMP1,CAN1 Receive Message Pending 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Message Pending" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Message Pending" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Message Pending" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Message Pending" "0,1" group.word 0x1C++0x1 line.word 0x00 "CAN1_RML1,CAN1 Receive Message Lost 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Message Lost" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Message Lost" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Message Lost" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Message Lost" "0,1" group.word 0x20++0x1 line.word 0x00 "CAN1_MBTIF1,CAN1 Mailbox Transmit Interrupt Flag 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit Interrupt Request Pending" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit Interrupt Request Pending" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit Interrupt Request Pending" "0,1" group.word 0x24++0x1 line.word 0x00 "CAN1_MBRIF1,CAN1 Mailbox Receive Interrupt Flag 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Receive Interrupt Request Pending" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Receive Interrupt Request Pending" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Receive Interrupt Request Pending" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Receive Interrupt Request Pending" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Receive Interrupt Request Pending" "0,1" group.word 0x28++0x1 line.word 0x00 "CAN1_MBIM1,CAN1 Mailbox Interrupt Mask 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Transmit and Receive Interrupt Request Enable" "0,1" group.word 0x2C++0x1 line.word 0x00 "CAN1_RFH1,CAN1 Remote Frame Handling 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Remote Frame Handling Enable" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Remote Frame Handling Enable" "0,1" group.word 0x30++0x1 line.word 0x00 "CAN1_OPSS1,CAN1 Overwrite Protection/Single Shot Transmission 1 Register" bitfld.word 0x00 15. " MB15 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 14. " MB14 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 13. " MB13 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 12. " MB12 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 11. " MB11 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 10. " MB10 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 9. " MB09 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 8. " MB08 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 7. " MB07 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 6. " MB06 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 5. " MB05 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 4. " MB04 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 3. " MB03 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 2. " MB02 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 1. " MB01 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 0. " MB00 ,Mailbox n Overwrite Protection Enable" "0,1" group.word 0x40++0x1 line.word 0x00 "CAN1_MC2,CAN1 Mailbox Configuration 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Enable/Disable" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Enable/Disable" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Enable/Disable" "0,1" group.word 0x44++0x1 line.word 0x00 "CAN1_MD2,CAN1 Mailbox Direction 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit/Receive" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit/Receive" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit/Receive" "0,1" group.word 0x48++0x1 line.word 0x00 "CAN1_TRS2,CAN1 Transmission Request Set 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit Request" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit Request" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit Request" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit Request" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit Request" "0,1" group.word 0x4C++0x1 line.word 0x00 "CAN1_TRR2,CAN1 Transmission Request Reset 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit Abort" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit Abort" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit Abort" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit Abort" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit Abort" "0,1" group.word 0x50++0x1 line.word 0x00 "CAN1_TA2,CAN1 Transmission Acknowledge 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit Acknowledge" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit Acknowledge" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit Acknowledge" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit Acknowledge" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit Acknowledge" "0,1" group.word 0x54++0x1 line.word 0x00 "CAN1_AA2,CAN1 Abort Acknowledge 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Abort Acknowledge" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Abort Acknowledge" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Abort Acknowledge" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Abort Acknowledge" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Abort Acknowledge" "0,1" group.word 0x58++0x1 line.word 0x00 "CAN1_RMP2,CAN1 Receive Message Pending 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Message Pending" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Message Pending" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Message Pending" "0,1" group.word 0x5C++0x1 line.word 0x00 "CAN1_RML2,CAN1 Receive Message Lost 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Message Lost" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Message Lost" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Message Lost" "0,1" group.word 0x60++0x1 line.word 0x00 "CAN1_MBTIF2,CAN1 Mailbox Transmit Interrupt Flag 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit Interrupt Pending" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit Interrupt Pending" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit Interrupt Pending" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit Interrupt Pending" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit Interrupt Pending" "0,1" group.word 0x64++0x1 line.word 0x00 "CAN1_MBRIF2,CAN1 Mailbox Receive Interrupt Flag 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Receive Interrupt Pending" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Receive Interrupt Pending" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Receive Interrupt Pending" "0,1" group.word 0x68++0x1 line.word 0x00 "CAN1_MBIM2,CAN1 Mailbox Interrupt Mask 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Transmit and Receive Interrupt Enable" "0,1" group.word 0x6C++0x1 line.word 0x00 "CAN1_RFH2,CAN1 Remote Frame Handling 2 Register" bitfld.word 0x00 7. " MB23 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Remote Frame Handling Enable" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Remote Frame Handling Enable" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Remote Frame Handling Enable" "0,1" group.word 0x70++0x1 line.word 0x00 "CAN1_OPSS2,CAN1 Overwrite Protection/Single Shot Transmission 2 Register" bitfld.word 0x00 15. " MB31 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 14. " MB30 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 13. " MB29 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 12. " MB28 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 11. " MB27 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 10. " MB26 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 9. " MB25 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 8. " MB24 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 7. " MB23 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 6. " MB22 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 5. " MB21 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 4. " MB20 ,Mailbox n Overwrite Protection Enable" "0,1" newline bitfld.word 0x00 3. " MB19 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 2. " MB18 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 1. " MB17 ,Mailbox n Overwrite Protection Enable" "0,1" bitfld.word 0x00 0. " MB16 ,Mailbox n Overwrite Protection Enable" "0,1" group.word 0x80++0x1 line.word 0x00 "CAN1_CLK,CAN1 Clock Register" hexmask.word 0x00 0.--9. 1. " BRP ,Bit Rate Prescaler" group.word 0x84++0x1 line.word 0x00 "CAN1_TIMING,CAN1 Timing Register" bitfld.word 0x00 8.--9. " SJW ,Synchronization Jump Width" "0,1,2,3" bitfld.word 0x00 7. " SAM ,Sampling" "0,1" bitfld.word 0x00 4.--6. " TSEG2 ,Time Segment 2" "0,1,2,3,4,5,6,7" bitfld.word 0x00 0.--3. " TSEG1 ,Time Segment 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x88++0x1 line.word 0x00 "CAN1_DBG,CAN1 Debug Register" bitfld.word 0x00 15. " CDE ,CAN Debug Mode Enable" "0,1" bitfld.word 0x00 5. " MRB ,Mode Read Back" "0,1" bitfld.word 0x00 4. " MAA ,Mode Auto Acknowledge" "0,1" bitfld.word 0x00 3. " DIL ,Disable Internal Loop" "0,1" newline bitfld.word 0x00 2. " DTO ,Disable Tx Output Pin" "0,1" bitfld.word 0x00 1. " DRI ,Disable Receive Input Pin" "0,1" bitfld.word 0x00 0. " DEC ,Disable Transmit and Receive Error Counters" "0,1" group.word 0x8C++0x1 line.word 0x00 "CAN1_STAT,CAN1 Status Register" bitfld.word 0x00 15. " REC ,Receive Mode" "0,1" bitfld.word 0x00 14. " TRM ,Transmit Mode" "0,1" bitfld.word 0x00 8.--12. " MBPTR ,Mailbox Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.word 0x00 7. " CCA ,CAN Configuration Mode Acknowledge" "0,1" newline bitfld.word 0x00 6. " CSA ,CAN Suspend Mode Acknowledge" "0,1" bitfld.word 0x00 3. " EBO ,CAN Error Bus Off Mode" "0,1" bitfld.word 0x00 2. " EP ,CAN Error Passive Mode" "0,1" bitfld.word 0x00 1. " WR ,CAN Receive Warning Flag" "0,1" newline bitfld.word 0x00 0. " WT ,CAN Transmit Warning Flag" "0,1" group.word 0x90++0x1 line.word 0x00 "CAN1_CEC,CAN1 Error Counter Register" hexmask.word.byte 0x00 8.--15. 1. " TXECNT ,Transmit Error Counter" hexmask.word.byte 0x00 0.--7. 1. " RXECNT ,Receive Error Counter" group.word 0x94++0x1 line.word 0x00 "CAN1_GIS,CAN1 Global CAN Interrupt Status Register" bitfld.word 0x00 10. " ADIS ,Access Denied Interrupt Status" "0,1" bitfld.word 0x00 8. " UCEIS ,Universal Counter Exceeded Interrupt Status" "0,1" bitfld.word 0x00 7. " RMLIS ,Receive Message Lost Interrupt Status" "0,1" bitfld.word 0x00 6. " AAIS ,Abort Acknowledge Interrupt Status" "0,1" newline bitfld.word 0x00 5. " UIAIS ,Unimplemented Address Interrupt Status" "0,1" bitfld.word 0x00 4. " WUIS ,Wake Up Interrupt Status" "0,1" bitfld.word 0x00 3. " BOIS ,Bus Off Interrupt Status" "0,1" bitfld.word 0x00 2. " EPIS ,Error Passive Interrupt Status" "0,1" newline bitfld.word 0x00 1. " EWRIS ,Error Warning Receive Interrupt Status" "0,1" bitfld.word 0x00 0. " EWTIS ,Error Warning Transmit Interrupt Status" "0,1" group.word 0x98++0x1 line.word 0x00 "CAN1_GIM,CAN1 Global CAN Interrupt Mask Register" bitfld.word 0x00 10. " ADIM ,Access Denied Interrupt Mask" "0,1" bitfld.word 0x00 8. " UCEIM ,Universal Counter Exceeded Interrupt Mask" "0,1" bitfld.word 0x00 7. " RMLIM ,Receive Message Lost Interrupt Mask" "0,1" bitfld.word 0x00 6. " AAIM ,Abort Acknowledge Interrupt Mask" "0,1" newline bitfld.word 0x00 5. " UIAIM ,Unimplemented Address Interrupt Mask" "0,1" bitfld.word 0x00 4. " WUIM ,Wake Up Interrupt Mask" "0,1" bitfld.word 0x00 3. " BOIM ,Bus Off Interrupt Mask" "0,1" bitfld.word 0x00 2. " EPIM ,Error Passive Interrupt Mask" "0,1" newline bitfld.word 0x00 1. " EWRIM ,Error Warning Receive Interrupt Mask" "0,1" bitfld.word 0x00 0. " EWTIM ,Error Warning Transmit Interrupt Mask" "0,1" group.word 0x9C++0x1 line.word 0x00 "CAN1_GIF,CAN1 Global CAN Interrupt Flag Register" bitfld.word 0x00 10. " ADIF ,Access Denied Interrupt Flag" "0,1" bitfld.word 0x00 8. " UCEIF ,Universal Counter Exceeded Interrupt Flag" "0,1" bitfld.word 0x00 7. " RMLIF ,Receive Message Lost Interrupt Flag" "0,1" bitfld.word 0x00 6. " AAIF ,Abort Acknowledge Interrupt Flag" "0,1" newline bitfld.word 0x00 5. " UIAIF ,Unimplemented Address Interrupt Flag" "0,1" bitfld.word 0x00 4. " WUIF ,Wake Up Interrupt Flag" "0,1" bitfld.word 0x00 3. " BOIF ,Bus Off Interrupt Flag" "0,1" bitfld.word 0x00 2. " EPIF ,Error Passive Interrupt Flag" "0,1" newline bitfld.word 0x00 1. " EWRIF ,Error Warning Receive Interrupt Flag" "0,1" bitfld.word 0x00 0. " EWTIF ,Error Warning Transmit Interrupt Flag" "0,1" group.word 0xA0++0x1 line.word 0x00 "CAN1_CTL,CAN1 CAN Master Control Register" bitfld.word 0x00 7. " CCR ,CAN Configuration Mode Request" "0,1" bitfld.word 0x00 6. " CSR ,CAN Suspend Mode Request" "0,1" bitfld.word 0x00 5. " SMR ,Sleep Mode Request" "0,1" bitfld.word 0x00 4. " WBA ,Wake Up on CAN Bus Activity" "0,1" newline bitfld.word 0x00 2. " ABO ,Auto Bus On" "0,1" bitfld.word 0x00 1. " DNM ,Device Net Mode" "0,1" bitfld.word 0x00 0. " SRS ,Software Reset" "0,1" group.word 0xA4++0x1 line.word 0x00 "CAN1_INT,CAN1 Interrupt Pending Register" bitfld.word 0x00 7. " CANRX ,Serial Input From Transceiver" "0,1" bitfld.word 0x00 6. " CANTX ,Serial Input To Transceiver" "0,1" bitfld.word 0x00 3. " SMACK ,Sleep Mode Acknowledge" "0,1" bitfld.word 0x00 2. " GIRQ ,Global CAN Interrupt Output" "0,1" newline bitfld.word 0x00 1. " MBTIRQ ,Mailbox Transmit Interrupt Output" "0,1" bitfld.word 0x00 0. " MBRIRQ ,Mailbox Receive Interrupt Output" "0,1" group.word 0xAC++0x1 line.word 0x00 "CAN1_MBTD,CAN1 Temporary Mailbox Disable Register" bitfld.word 0x00 7. " TDR ,Temporary Disable Request" "0,1" bitfld.word 0x00 6. " TDA ,Temporary Disable Acknowledge" "0,1" bitfld.word 0x00 0.--4. " TDPTR ,Temporary Disable Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.word 0xB0++0x1 line.word 0x00 "CAN1_EWR,CAN1 Error Counter Warning Level Register" hexmask.word.byte 0x00 8.--15. 1. " EWLTEC ,Transmit Error Warning Limit" hexmask.word.byte 0x00 0.--7. 1. " EWLREC ,Receive Error Warning Limit" group.word 0xB4++0x1 line.word 0x00 "CAN1_ESR,CAN1 Error Status Register" bitfld.word 0x00 7. " FER ,Form Error" "0,1" bitfld.word 0x00 6. " BEF ,Bit Error Flag" "0,1" bitfld.word 0x00 5. " SAO ,Stuck at Dominant" "0,1" bitfld.word 0x00 4. " CRCE ,CRC Error" "0,1" newline bitfld.word 0x00 3. " SER ,Stuff Bit Error" "0,1" bitfld.word 0x00 2. " ACKE ,Acknowledge Error" "0,1" group.word 0xC4++0x1 line.word 0x00 "CAN1_UCCNT,CAN1 Universal Counter Register" group.word 0xC8++0x1 line.word 0x00 "CAN1_UCRC,CAN1 Universal Counter Reload/Capture Register" group.word 0xCC++0x1 line.word 0x00 "CAN1_UCCNF,CAN1 Universal Counter Configuration Mode Register" bitfld.word 0x00 7. " UCE ,Universal Counter Enable" "0,1" bitfld.word 0x00 6. " UCCT ,Universal Counter CAN Trigger" "0,1" bitfld.word 0x00 5. " UCRC ,Universal Counter Reload/Clear" "0,1" bitfld.word 0x00 0.--3. " UCCNF ,Universal Counter Configuration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x100++0x1 line.word 0x00 "CAN1_AM00L,CAN1 Acceptance Mask (L) Register" group.word 0x104++0x1 line.word 0x00 "CAN1_AM00H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x108++0x1 line.word 0x00 "CAN1_AM01L,CAN1 Acceptance Mask (L) Register" group.word 0x10C++0x1 line.word 0x00 "CAN1_AM01H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x110++0x1 line.word 0x00 "CAN1_AM02L,CAN1 Acceptance Mask (L) Register" group.word 0x114++0x1 line.word 0x00 "CAN1_AM02H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x118++0x1 line.word 0x00 "CAN1_AM03L,CAN1 Acceptance Mask (L) Register" group.word 0x11C++0x1 line.word 0x00 "CAN1_AM03H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x120++0x1 line.word 0x00 "CAN1_AM04L,CAN1 Acceptance Mask (L) Register" group.word 0x124++0x1 line.word 0x00 "CAN1_AM04H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x128++0x1 line.word 0x00 "CAN1_AM05L,CAN1 Acceptance Mask (L) Register" group.word 0x12C++0x1 line.word 0x00 "CAN1_AM05H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x130++0x1 line.word 0x00 "CAN1_AM06L,CAN1 Acceptance Mask (L) Register" group.word 0x134++0x1 line.word 0x00 "CAN1_AM06H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x138++0x1 line.word 0x00 "CAN1_AM07L,CAN1 Acceptance Mask (L) Register" group.word 0x13C++0x1 line.word 0x00 "CAN1_AM07H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x140++0x1 line.word 0x00 "CAN1_AM08L,CAN1 Acceptance Mask (L) Register" group.word 0x144++0x1 line.word 0x00 "CAN1_AM08H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x148++0x1 line.word 0x00 "CAN1_AM09L,CAN1 Acceptance Mask (L) Register" group.word 0x14C++0x1 line.word 0x00 "CAN1_AM09H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x150++0x1 line.word 0x00 "CAN1_AM10L,CAN1 Acceptance Mask (L) Register" group.word 0x154++0x1 line.word 0x00 "CAN1_AM10H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x158++0x1 line.word 0x00 "CAN1_AM11L,CAN1 Acceptance Mask (L) Register" group.word 0x15C++0x1 line.word 0x00 "CAN1_AM11H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x160++0x1 line.word 0x00 "CAN1_AM12L,CAN1 Acceptance Mask (L) Register" group.word 0x164++0x1 line.word 0x00 "CAN1_AM12H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x168++0x1 line.word 0x00 "CAN1_AM13L,CAN1 Acceptance Mask (L) Register" group.word 0x16C++0x1 line.word 0x00 "CAN1_AM13H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x170++0x1 line.word 0x00 "CAN1_AM14L,CAN1 Acceptance Mask (L) Register" group.word 0x174++0x1 line.word 0x00 "CAN1_AM14H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x178++0x1 line.word 0x00 "CAN1_AM15L,CAN1 Acceptance Mask (L) Register" group.word 0x17C++0x1 line.word 0x00 "CAN1_AM15H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x180++0x1 line.word 0x00 "CAN1_AM16L,CAN1 Acceptance Mask (L) Register" group.word 0x184++0x1 line.word 0x00 "CAN1_AM16H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x188++0x1 line.word 0x00 "CAN1_AM17L,CAN1 Acceptance Mask (L) Register" group.word 0x18C++0x1 line.word 0x00 "CAN1_AM17H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x190++0x1 line.word 0x00 "CAN1_AM18L,CAN1 Acceptance Mask (L) Register" group.word 0x194++0x1 line.word 0x00 "CAN1_AM18H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x198++0x1 line.word 0x00 "CAN1_AM19L,CAN1 Acceptance Mask (L) Register" group.word 0x19C++0x1 line.word 0x00 "CAN1_AM19H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1A0++0x1 line.word 0x00 "CAN1_AM20L,CAN1 Acceptance Mask (L) Register" group.word 0x1A4++0x1 line.word 0x00 "CAN1_AM20H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1A8++0x1 line.word 0x00 "CAN1_AM21L,CAN1 Acceptance Mask (L) Register" group.word 0x1AC++0x1 line.word 0x00 "CAN1_AM21H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1B0++0x1 line.word 0x00 "CAN1_AM22L,CAN1 Acceptance Mask (L) Register" group.word 0x1B4++0x1 line.word 0x00 "CAN1_AM22H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1B8++0x1 line.word 0x00 "CAN1_AM23L,CAN1 Acceptance Mask (L) Register" group.word 0x1BC++0x1 line.word 0x00 "CAN1_AM23H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1C0++0x1 line.word 0x00 "CAN1_AM24L,CAN1 Acceptance Mask (L) Register" group.word 0x1C4++0x1 line.word 0x00 "CAN1_AM24H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1C8++0x1 line.word 0x00 "CAN1_AM25L,CAN1 Acceptance Mask (L) Register" group.word 0x1CC++0x1 line.word 0x00 "CAN1_AM25H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1D0++0x1 line.word 0x00 "CAN1_AM26L,CAN1 Acceptance Mask (L) Register" group.word 0x1D4++0x1 line.word 0x00 "CAN1_AM26H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1D8++0x1 line.word 0x00 "CAN1_AM27L,CAN1 Acceptance Mask (L) Register" group.word 0x1DC++0x1 line.word 0x00 "CAN1_AM27H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1E0++0x1 line.word 0x00 "CAN1_AM28L,CAN1 Acceptance Mask (L) Register" group.word 0x1E4++0x1 line.word 0x00 "CAN1_AM28H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1E8++0x1 line.word 0x00 "CAN1_AM29L,CAN1 Acceptance Mask (L) Register" group.word 0x1EC++0x1 line.word 0x00 "CAN1_AM29H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1F0++0x1 line.word 0x00 "CAN1_AM30L,CAN1 Acceptance Mask (L) Register" group.word 0x1F4++0x1 line.word 0x00 "CAN1_AM30H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x1F8++0x1 line.word 0x00 "CAN1_AM31L,CAN1 Acceptance Mask (L) Register" group.word 0x1FC++0x1 line.word 0x00 "CAN1_AM31H,CAN1 Acceptance Mask (H) Register" bitfld.word 0x00 15. " FDF ,Filter on Delay Field" "0,1" bitfld.word 0x00 14. " FMD ,Full Mask Data" "0,1" bitfld.word 0x00 13. " AMIDE ,Acceptance Mask Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x200++0x1 line.word 0x00 "CAN1_MB00_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x204++0x1 line.word 0x00 "CAN1_MB00_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x208++0x1 line.word 0x00 "CAN1_MB00_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x20C++0x1 line.word 0x00 "CAN1_MB00_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x210++0x1 line.word 0x00 "CAN1_MB00_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x214++0x1 line.word 0x00 "CAN1_MB00_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x218++0x1 line.word 0x00 "CAN1_MB00_ID0,CAN1 Mailbox ID 0 Register" group.word 0x21C++0x1 line.word 0x00 "CAN1_MB00_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x220++0x1 line.word 0x00 "CAN1_MB01_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x224++0x1 line.word 0x00 "CAN1_MB01_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x228++0x1 line.word 0x00 "CAN1_MB01_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x22C++0x1 line.word 0x00 "CAN1_MB01_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x230++0x1 line.word 0x00 "CAN1_MB01_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x234++0x1 line.word 0x00 "CAN1_MB01_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x238++0x1 line.word 0x00 "CAN1_MB01_ID0,CAN1 Mailbox ID 0 Register" group.word 0x23C++0x1 line.word 0x00 "CAN1_MB01_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x240++0x1 line.word 0x00 "CAN1_MB02_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x244++0x1 line.word 0x00 "CAN1_MB02_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x248++0x1 line.word 0x00 "CAN1_MB02_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x24C++0x1 line.word 0x00 "CAN1_MB02_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x250++0x1 line.word 0x00 "CAN1_MB02_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x254++0x1 line.word 0x00 "CAN1_MB02_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x258++0x1 line.word 0x00 "CAN1_MB02_ID0,CAN1 Mailbox ID 0 Register" group.word 0x25C++0x1 line.word 0x00 "CAN1_MB02_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x260++0x1 line.word 0x00 "CAN1_MB03_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x264++0x1 line.word 0x00 "CAN1_MB03_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x268++0x1 line.word 0x00 "CAN1_MB03_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x26C++0x1 line.word 0x00 "CAN1_MB03_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x270++0x1 line.word 0x00 "CAN1_MB03_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x274++0x1 line.word 0x00 "CAN1_MB03_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x278++0x1 line.word 0x00 "CAN1_MB03_ID0,CAN1 Mailbox ID 0 Register" group.word 0x27C++0x1 line.word 0x00 "CAN1_MB03_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x280++0x1 line.word 0x00 "CAN1_MB04_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x284++0x1 line.word 0x00 "CAN1_MB04_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x288++0x1 line.word 0x00 "CAN1_MB04_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x28C++0x1 line.word 0x00 "CAN1_MB04_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x290++0x1 line.word 0x00 "CAN1_MB04_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x294++0x1 line.word 0x00 "CAN1_MB04_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x298++0x1 line.word 0x00 "CAN1_MB04_ID0,CAN1 Mailbox ID 0 Register" group.word 0x29C++0x1 line.word 0x00 "CAN1_MB04_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x2A0++0x1 line.word 0x00 "CAN1_MB05_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x2A4++0x1 line.word 0x00 "CAN1_MB05_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x2A8++0x1 line.word 0x00 "CAN1_MB05_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x2AC++0x1 line.word 0x00 "CAN1_MB05_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x2B0++0x1 line.word 0x00 "CAN1_MB05_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x2B4++0x1 line.word 0x00 "CAN1_MB05_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x2B8++0x1 line.word 0x00 "CAN1_MB05_ID0,CAN1 Mailbox ID 0 Register" group.word 0x2BC++0x1 line.word 0x00 "CAN1_MB05_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x2C0++0x1 line.word 0x00 "CAN1_MB06_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x2C4++0x1 line.word 0x00 "CAN1_MB06_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x2C8++0x1 line.word 0x00 "CAN1_MB06_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x2CC++0x1 line.word 0x00 "CAN1_MB06_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x2D0++0x1 line.word 0x00 "CAN1_MB06_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x2D4++0x1 line.word 0x00 "CAN1_MB06_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x2D8++0x1 line.word 0x00 "CAN1_MB06_ID0,CAN1 Mailbox ID 0 Register" group.word 0x2DC++0x1 line.word 0x00 "CAN1_MB06_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x2E0++0x1 line.word 0x00 "CAN1_MB07_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x2E4++0x1 line.word 0x00 "CAN1_MB07_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x2E8++0x1 line.word 0x00 "CAN1_MB07_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x2EC++0x1 line.word 0x00 "CAN1_MB07_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x2F0++0x1 line.word 0x00 "CAN1_MB07_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x2F4++0x1 line.word 0x00 "CAN1_MB07_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x2F8++0x1 line.word 0x00 "CAN1_MB07_ID0,CAN1 Mailbox ID 0 Register" group.word 0x2FC++0x1 line.word 0x00 "CAN1_MB07_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x300++0x1 line.word 0x00 "CAN1_MB08_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x304++0x1 line.word 0x00 "CAN1_MB08_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x308++0x1 line.word 0x00 "CAN1_MB08_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x30C++0x1 line.word 0x00 "CAN1_MB08_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x310++0x1 line.word 0x00 "CAN1_MB08_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x314++0x1 line.word 0x00 "CAN1_MB08_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x318++0x1 line.word 0x00 "CAN1_MB08_ID0,CAN1 Mailbox ID 0 Register" group.word 0x31C++0x1 line.word 0x00 "CAN1_MB08_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x320++0x1 line.word 0x00 "CAN1_MB09_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x324++0x1 line.word 0x00 "CAN1_MB09_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x328++0x1 line.word 0x00 "CAN1_MB09_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x32C++0x1 line.word 0x00 "CAN1_MB09_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x330++0x1 line.word 0x00 "CAN1_MB09_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x334++0x1 line.word 0x00 "CAN1_MB09_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x338++0x1 line.word 0x00 "CAN1_MB09_ID0,CAN1 Mailbox ID 0 Register" group.word 0x33C++0x1 line.word 0x00 "CAN1_MB09_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x340++0x1 line.word 0x00 "CAN1_MB10_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x344++0x1 line.word 0x00 "CAN1_MB10_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x348++0x1 line.word 0x00 "CAN1_MB10_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x34C++0x1 line.word 0x00 "CAN1_MB10_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x350++0x1 line.word 0x00 "CAN1_MB10_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x354++0x1 line.word 0x00 "CAN1_MB10_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x358++0x1 line.word 0x00 "CAN1_MB10_ID0,CAN1 Mailbox ID 0 Register" group.word 0x35C++0x1 line.word 0x00 "CAN1_MB10_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x360++0x1 line.word 0x00 "CAN1_MB11_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x364++0x1 line.word 0x00 "CAN1_MB11_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x368++0x1 line.word 0x00 "CAN1_MB11_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x36C++0x1 line.word 0x00 "CAN1_MB11_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x370++0x1 line.word 0x00 "CAN1_MB11_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x374++0x1 line.word 0x00 "CAN1_MB11_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x378++0x1 line.word 0x00 "CAN1_MB11_ID0,CAN1 Mailbox ID 0 Register" group.word 0x37C++0x1 line.word 0x00 "CAN1_MB11_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x380++0x1 line.word 0x00 "CAN1_MB12_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x384++0x1 line.word 0x00 "CAN1_MB12_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x388++0x1 line.word 0x00 "CAN1_MB12_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x38C++0x1 line.word 0x00 "CAN1_MB12_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x390++0x1 line.word 0x00 "CAN1_MB12_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x394++0x1 line.word 0x00 "CAN1_MB12_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x398++0x1 line.word 0x00 "CAN1_MB12_ID0,CAN1 Mailbox ID 0 Register" group.word 0x39C++0x1 line.word 0x00 "CAN1_MB12_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x3A0++0x1 line.word 0x00 "CAN1_MB13_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x3A4++0x1 line.word 0x00 "CAN1_MB13_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x3A8++0x1 line.word 0x00 "CAN1_MB13_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x3AC++0x1 line.word 0x00 "CAN1_MB13_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x3B0++0x1 line.word 0x00 "CAN1_MB13_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x3B4++0x1 line.word 0x00 "CAN1_MB13_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x3B8++0x1 line.word 0x00 "CAN1_MB13_ID0,CAN1 Mailbox ID 0 Register" group.word 0x3BC++0x1 line.word 0x00 "CAN1_MB13_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x3C0++0x1 line.word 0x00 "CAN1_MB14_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x3C4++0x1 line.word 0x00 "CAN1_MB14_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x3C8++0x1 line.word 0x00 "CAN1_MB14_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x3CC++0x1 line.word 0x00 "CAN1_MB14_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x3D0++0x1 line.word 0x00 "CAN1_MB14_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x3D4++0x1 line.word 0x00 "CAN1_MB14_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x3D8++0x1 line.word 0x00 "CAN1_MB14_ID0,CAN1 Mailbox ID 0 Register" group.word 0x3DC++0x1 line.word 0x00 "CAN1_MB14_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x3E0++0x1 line.word 0x00 "CAN1_MB15_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x3E4++0x1 line.word 0x00 "CAN1_MB15_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x3E8++0x1 line.word 0x00 "CAN1_MB15_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x3EC++0x1 line.word 0x00 "CAN1_MB15_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x3F0++0x1 line.word 0x00 "CAN1_MB15_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x3F4++0x1 line.word 0x00 "CAN1_MB15_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x3F8++0x1 line.word 0x00 "CAN1_MB15_ID0,CAN1 Mailbox ID 0 Register" group.word 0x3FC++0x1 line.word 0x00 "CAN1_MB15_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x400++0x1 line.word 0x00 "CAN1_MB16_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x404++0x1 line.word 0x00 "CAN1_MB16_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x408++0x1 line.word 0x00 "CAN1_MB16_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x40C++0x1 line.word 0x00 "CAN1_MB16_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x410++0x1 line.word 0x00 "CAN1_MB16_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x414++0x1 line.word 0x00 "CAN1_MB16_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x418++0x1 line.word 0x00 "CAN1_MB16_ID0,CAN1 Mailbox ID 0 Register" group.word 0x41C++0x1 line.word 0x00 "CAN1_MB16_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x420++0x1 line.word 0x00 "CAN1_MB17_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x424++0x1 line.word 0x00 "CAN1_MB17_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x428++0x1 line.word 0x00 "CAN1_MB17_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x42C++0x1 line.word 0x00 "CAN1_MB17_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x430++0x1 line.word 0x00 "CAN1_MB17_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x434++0x1 line.word 0x00 "CAN1_MB17_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x438++0x1 line.word 0x00 "CAN1_MB17_ID0,CAN1 Mailbox ID 0 Register" group.word 0x43C++0x1 line.word 0x00 "CAN1_MB17_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x440++0x1 line.word 0x00 "CAN1_MB18_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x444++0x1 line.word 0x00 "CAN1_MB18_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x448++0x1 line.word 0x00 "CAN1_MB18_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x44C++0x1 line.word 0x00 "CAN1_MB18_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x450++0x1 line.word 0x00 "CAN1_MB18_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x454++0x1 line.word 0x00 "CAN1_MB18_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x458++0x1 line.word 0x00 "CAN1_MB18_ID0,CAN1 Mailbox ID 0 Register" group.word 0x45C++0x1 line.word 0x00 "CAN1_MB18_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x460++0x1 line.word 0x00 "CAN1_MB19_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x464++0x1 line.word 0x00 "CAN1_MB19_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x468++0x1 line.word 0x00 "CAN1_MB19_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x46C++0x1 line.word 0x00 "CAN1_MB19_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x470++0x1 line.word 0x00 "CAN1_MB19_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x474++0x1 line.word 0x00 "CAN1_MB19_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x478++0x1 line.word 0x00 "CAN1_MB19_ID0,CAN1 Mailbox ID 0 Register" group.word 0x47C++0x1 line.word 0x00 "CAN1_MB19_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x480++0x1 line.word 0x00 "CAN1_MB20_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x484++0x1 line.word 0x00 "CAN1_MB20_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x488++0x1 line.word 0x00 "CAN1_MB20_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x48C++0x1 line.word 0x00 "CAN1_MB20_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x490++0x1 line.word 0x00 "CAN1_MB20_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x494++0x1 line.word 0x00 "CAN1_MB20_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x498++0x1 line.word 0x00 "CAN1_MB20_ID0,CAN1 Mailbox ID 0 Register" group.word 0x49C++0x1 line.word 0x00 "CAN1_MB20_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x4A0++0x1 line.word 0x00 "CAN1_MB21_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x4A4++0x1 line.word 0x00 "CAN1_MB21_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x4A8++0x1 line.word 0x00 "CAN1_MB21_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x4AC++0x1 line.word 0x00 "CAN1_MB21_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x4B0++0x1 line.word 0x00 "CAN1_MB21_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x4B4++0x1 line.word 0x00 "CAN1_MB21_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x4B8++0x1 line.word 0x00 "CAN1_MB21_ID0,CAN1 Mailbox ID 0 Register" group.word 0x4BC++0x1 line.word 0x00 "CAN1_MB21_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x4C0++0x1 line.word 0x00 "CAN1_MB22_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x4C4++0x1 line.word 0x00 "CAN1_MB22_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x4C8++0x1 line.word 0x00 "CAN1_MB22_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x4CC++0x1 line.word 0x00 "CAN1_MB22_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x4D0++0x1 line.word 0x00 "CAN1_MB22_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x4D4++0x1 line.word 0x00 "CAN1_MB22_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x4D8++0x1 line.word 0x00 "CAN1_MB22_ID0,CAN1 Mailbox ID 0 Register" group.word 0x4DC++0x1 line.word 0x00 "CAN1_MB22_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x4E0++0x1 line.word 0x00 "CAN1_MB23_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x4E4++0x1 line.word 0x00 "CAN1_MB23_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x4E8++0x1 line.word 0x00 "CAN1_MB23_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x4EC++0x1 line.word 0x00 "CAN1_MB23_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x4F0++0x1 line.word 0x00 "CAN1_MB23_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x4F4++0x1 line.word 0x00 "CAN1_MB23_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x4F8++0x1 line.word 0x00 "CAN1_MB23_ID0,CAN1 Mailbox ID 0 Register" group.word 0x4FC++0x1 line.word 0x00 "CAN1_MB23_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x500++0x1 line.word 0x00 "CAN1_MB24_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x504++0x1 line.word 0x00 "CAN1_MB24_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x508++0x1 line.word 0x00 "CAN1_MB24_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x50C++0x1 line.word 0x00 "CAN1_MB24_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x510++0x1 line.word 0x00 "CAN1_MB24_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x514++0x1 line.word 0x00 "CAN1_MB24_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x518++0x1 line.word 0x00 "CAN1_MB24_ID0,CAN1 Mailbox ID 0 Register" group.word 0x51C++0x1 line.word 0x00 "CAN1_MB24_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x520++0x1 line.word 0x00 "CAN1_MB25_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x524++0x1 line.word 0x00 "CAN1_MB25_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x528++0x1 line.word 0x00 "CAN1_MB25_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x52C++0x1 line.word 0x00 "CAN1_MB25_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x530++0x1 line.word 0x00 "CAN1_MB25_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x534++0x1 line.word 0x00 "CAN1_MB25_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x538++0x1 line.word 0x00 "CAN1_MB25_ID0,CAN1 Mailbox ID 0 Register" group.word 0x53C++0x1 line.word 0x00 "CAN1_MB25_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x540++0x1 line.word 0x00 "CAN1_MB26_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x544++0x1 line.word 0x00 "CAN1_MB26_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x548++0x1 line.word 0x00 "CAN1_MB26_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x54C++0x1 line.word 0x00 "CAN1_MB26_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x550++0x1 line.word 0x00 "CAN1_MB26_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x554++0x1 line.word 0x00 "CAN1_MB26_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x558++0x1 line.word 0x00 "CAN1_MB26_ID0,CAN1 Mailbox ID 0 Register" group.word 0x55C++0x1 line.word 0x00 "CAN1_MB26_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x560++0x1 line.word 0x00 "CAN1_MB27_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x564++0x1 line.word 0x00 "CAN1_MB27_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x568++0x1 line.word 0x00 "CAN1_MB27_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x56C++0x1 line.word 0x00 "CAN1_MB27_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x570++0x1 line.word 0x00 "CAN1_MB27_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x574++0x1 line.word 0x00 "CAN1_MB27_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x578++0x1 line.word 0x00 "CAN1_MB27_ID0,CAN1 Mailbox ID 0 Register" group.word 0x57C++0x1 line.word 0x00 "CAN1_MB27_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x580++0x1 line.word 0x00 "CAN1_MB28_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x584++0x1 line.word 0x00 "CAN1_MB28_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x588++0x1 line.word 0x00 "CAN1_MB28_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x58C++0x1 line.word 0x00 "CAN1_MB28_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x590++0x1 line.word 0x00 "CAN1_MB28_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x594++0x1 line.word 0x00 "CAN1_MB28_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x598++0x1 line.word 0x00 "CAN1_MB28_ID0,CAN1 Mailbox ID 0 Register" group.word 0x59C++0x1 line.word 0x00 "CAN1_MB28_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x5A0++0x1 line.word 0x00 "CAN1_MB29_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x5A4++0x1 line.word 0x00 "CAN1_MB29_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x5A8++0x1 line.word 0x00 "CAN1_MB29_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x5AC++0x1 line.word 0x00 "CAN1_MB29_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x5B0++0x1 line.word 0x00 "CAN1_MB29_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x5B4++0x1 line.word 0x00 "CAN1_MB29_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x5B8++0x1 line.word 0x00 "CAN1_MB29_ID0,CAN1 Mailbox ID 0 Register" group.word 0x5BC++0x1 line.word 0x00 "CAN1_MB29_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x5C0++0x1 line.word 0x00 "CAN1_MB30_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x5C4++0x1 line.word 0x00 "CAN1_MB30_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x5C8++0x1 line.word 0x00 "CAN1_MB30_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x5CC++0x1 line.word 0x00 "CAN1_MB30_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x5D0++0x1 line.word 0x00 "CAN1_MB30_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x5D4++0x1 line.word 0x00 "CAN1_MB30_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x5D8++0x1 line.word 0x00 "CAN1_MB30_ID0,CAN1 Mailbox ID 0 Register" group.word 0x5DC++0x1 line.word 0x00 "CAN1_MB30_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" group.word 0x5E0++0x1 line.word 0x00 "CAN1_MB31_DATA0,CAN1 Mailbox Word 0 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB6 ,Data Field Byte 6" hexmask.word.byte 0x00 0.--7. 1. " DFB7 ,Data Field Byte 7" group.word 0x5E4++0x1 line.word 0x00 "CAN1_MB31_DATA1,CAN1 Mailbox Word 1 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB4 ,Data Field Byte 4" hexmask.word.byte 0x00 0.--7. 1. " DFB5 ,Data Field Byte 5" group.word 0x5E8++0x1 line.word 0x00 "CAN1_MB31_DATA2,CAN1 Mailbox Word 2 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB2 ,Data Field Byte 2" hexmask.word.byte 0x00 0.--7. 1. " DFB3 ,Data Field Byte 3" group.word 0x5EC++0x1 line.word 0x00 "CAN1_MB31_DATA3,CAN1 Mailbox Word 3 Register" hexmask.word.byte 0x00 8.--15. 1. " DFB0 ,Data Field Byte 0" hexmask.word.byte 0x00 0.--7. 1. " DFB1 ,Data Field Byte 1" group.word 0x5F0++0x1 line.word 0x00 "CAN1_MB31_LENGTH,CAN1 Mailbox Length Register" bitfld.word 0x00 0.--3. " DLC ,Data Length Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x5F4++0x1 line.word 0x00 "CAN1_MB31_TIMESTAMP,CAN1 Mailbox Time Stamp Register" group.word 0x5F8++0x1 line.word 0x00 "CAN1_MB31_ID0,CAN1 Mailbox ID 0 Register" group.word 0x5FC++0x1 line.word 0x00 "CAN1_MB31_ID1,CAN1 Mailbox ID 1 Register" bitfld.word 0x00 15. " AME ,Acceptance Mask Enable" "0,1" bitfld.word 0x00 14. " RTR ,Remote Transmission Request" "0,1" bitfld.word 0x00 13. " IDE ,Identifier Extension" "0,1" hexmask.word 0x00 2.--12. 1. " BASEID ,Base Identifier" newline bitfld.word 0x00 0.--1. " EXTID ,Extended Identifier" "0,1,2,3" tree.end tree.end tree "CDU (Clock Distribution Unit)" base ad:0x3108F000 width 15. group.long 0x0++0x3 line.long 0x00 "CDU0_CFG0,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x4++0x3 line.long 0x00 "CDU0_CFG1,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x8++0x3 line.long 0x00 "CDU0_CFG2,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0xC++0x3 line.long 0x00 "CDU0_CFG3,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x10++0x3 line.long 0x00 "CDU0_CFG4,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x14++0x3 line.long 0x00 "CDU0_CFG5,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x18++0x3 line.long 0x00 "CDU0_CFG6,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x1C++0x3 line.long 0x00 "CDU0_CFG7,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x20++0x3 line.long 0x00 "CDU0_CFG8,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x24++0x3 line.long 0x00 "CDU0_CFG9,CDU0 CDU Configuration" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 1.--2. " SEL ,Select Clock Input" "0,1,2,3" bitfld.long 0x00 0. " EN ,Clock Output Enabled" "0,1" group.long 0x40++0x3 line.long 0x00 "CDU0_STAT,CDU0 CDU Status" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 9. " CLKO9 ,CDU_CLKO9 Status" "0,1" bitfld.long 0x00 8. " CLKO8 ,CDU_CLKO8 Status" "0,1" newline bitfld.long 0x00 7. " CLKO7 ,CDU_CLKO7 Status" "0,1" bitfld.long 0x00 6. " CLKO6 ,CDU_CLKO6 Status" "0,1" bitfld.long 0x00 5. " CLKO5 ,CDU_CLKO5 Status" "0,1" bitfld.long 0x00 4. " CLKO4 ,CDU_CLKO4 Status" "0,1" newline bitfld.long 0x00 3. " CLKO3 ,CDU_CLKO3 Status" "0,1" bitfld.long 0x00 2. " CLKO2 ,CDU_CLKO2 Status" "0,1" bitfld.long 0x00 1. " CLKO1 ,CDU_CLKO1 Status" "0,1" bitfld.long 0x00 0. " CLKO0 ,CDU_CLKO0 Status" "0,1" group.long 0x44++0x3 line.long 0x00 "CDU0_CLKINSEL,CDU0 CLKIN Select" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 0. " CGU1 ,CGU1 CLKINn Select" "0,1" group.long 0x48++0x3 line.long 0x00 "CDU0_REVID,CDU0 CDU Revision ID" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree "CGU (Clock Generation Unit)" tree "CGU0" base ad:0x3108D000 width 16. group.long 0x0++0x3 line.long 0x00 "CGU0_CTL,CGU0 Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 30. " WFI ,Wait For Idle" "0,1" hexmask.long.byte 0x00 8.--14. 1. " MSEL ,Multiplier Select" bitfld.long 0x00 0. " DF ,Divide Frequency" "0,1" group.long 0x4++0x3 line.long 0x00 "CGU0_PLLCTL,CGU0 PLL Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 3. " PLLEN ,PLL Enable" "0,1" bitfld.long 0x00 2. " PLLDIS ,PLL Disable" "0,1" bitfld.long 0x00 1. " PLLBPCL ,PLL Bypass Clear" "0,1" newline bitfld.long 0x00 0. " PLLBPST ,PLL Bypass Set" "0,1" group.long 0x8++0x3 line.long 0x00 "CGU0_STAT,CGU0 Status Register" bitfld.long 0x00 21. " PCFGERR ,PLL Configuration Error" "0,1" bitfld.long 0x00 20. " WDIVERR ,Write to DIV Error" "0,1" bitfld.long 0x00 19. " WDFMSERR ,Write to DF or MSEL Error" "0,1" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" newline bitfld.long 0x00 16. " ADDRERR ,Address Error" "0,1" bitfld.long 0x00 15. " OSCWDSTATF ,Oscillator Watchdog Status Fault" "0,1" bitfld.long 0x00 12.--14. " OSCWDSTATFC ,Oscillator Watchdog Status Fault Code" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CLKSALGN ,Clock Alignment" "0,1" newline bitfld.long 0x00 2. " PLOCK ,PLL Lock" "0,1" bitfld.long 0x00 1. " PLLBP ,PLL Bypass" "0,1" bitfld.long 0x00 0. " PLLEN ,PLL Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "CGU0_DIV,CGU0 Clocks Divisor Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 30. " UPDT ,Update Clock Divisors" "0,1" bitfld.long 0x00 29. " ALGN ,Align" "0,1" hexmask.long.byte 0x00 22.--28. 1. " OSEL ,OCLK Divisor" newline bitfld.long 0x00 16.--20. " DSEL ,DCLK Divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 13.--15. " S1SEL ,SCLK 1 Divisor" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. " SYSSEL ,SYSCLK Divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--7. " S0SEL ,SCLK 0 Divisor" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. " CSEL ,CCLK Divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x10++0x3 line.long 0x00 "CGU0_CLKOUTSEL,CGU0 CLKOUT Select Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 16.--21. " USBCLKSEL ,USBCLK Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--4. " CLKOUTSEL ,CLKOUT Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x14++0x3 line.long 0x00 "CGU0_OSCWDCTL,CGU0 Oscillator Watchdog Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 23. " FAULTPINDIS ,Fault Pin disabled" "0,1" bitfld.long 0x00 15. " MONDIS ,Oscillator Watchdog Monitor functions disabled" "0,1" bitfld.long 0x00 14. " FAULTEN ,Fault enabled" "0,1" newline bitfld.long 0x00 13. " BOUEN ,Bad Oscillator Upper Frequency limit detection enabled" "0,1" bitfld.long 0x00 8.--12. " BOUF ,Bad Oscillator Upper Frequency limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 7. " CNGEN ,Clock not Good enabled" "0,1" bitfld.long 0x00 6. " HODEN ,Harmonic Oscillation Detection enabled" "0,1" newline bitfld.long 0x00 0.--5. " HODF ,Watchdog lower frequency limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x18++0x3 line.long 0x00 "CGU0_TSCTL,CGU0 Time Stamp Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 4.--7. " TSDIV ,Counter's Clock Divider" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. " LOAD ,Load Counter" "0,1" bitfld.long 0x00 0. " EN ,Counter Enable" "0,1" group.long 0x1C++0x3 line.long 0x00 "CGU0_TSVALUE0,CGU0 Time Stamp Counter Initial 32 LSB Value Register" group.long 0x20++0x3 line.long 0x00 "CGU0_TSVALUE1,CGU0 Time Stamp Counter Initial MSB Value Register" group.long 0x24++0x3 line.long 0x00 "CGU0_TSCOUNT0,CGU0 Time Stamp Counter 32 LSB Register" group.long 0x28++0x3 line.long 0x00 "CGU0_TSCOUNT1,CGU0 Time Stamp Counter 32 MSB Register" group.long 0x2C++0x3 line.long 0x00 "CGU0_CCBF_DIS,CGU0 Core Clock Buffer Disable Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 1. " CCBF1 ,Core Clock Buffer 1" "0,1" bitfld.long 0x00 0. " CCBF0 ,Core Clock Buffer 0" "0,1" group.long 0x30++0x3 line.long 0x00 "CGU0_CCBF_STAT,CGU0 Core Clock Buffer Status Register" bitfld.long 0x00 1. " CCBF1 ,Core Clock Buffer 1" "0,1" bitfld.long 0x00 0. " CCBF0 ,Core Clock Buffer 0" "0,1" group.long 0x38++0x3 line.long 0x00 "CGU0_SCBF_DIS,CGU0 System Clock Buffer Disable Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 3. " OUTCLKBF ,OCLK Buffer" "0,1" bitfld.long 0x00 2. " DCLKBF ,DCLK Buffer" "0,1" bitfld.long 0x00 1. " SCLK1BF ,SCLK1 Buffer" "0,1" newline bitfld.long 0x00 0. " SCLK0BF ,SCLK0 Buffer" "0,1" group.long 0x3C++0x3 line.long 0x00 "CGU0_SCBF_STAT,CGU0 System Clock Buffer Status Register" bitfld.long 0x00 3. " OCLKBF ,OCLK Buffer" "0,1" bitfld.long 0x00 2. " DCLKBF ,DCLK1 Buffer" "0,1" bitfld.long 0x00 1. " SCLK1BF ,SCLK1 Buffer" "0,1" bitfld.long 0x00 0. " SCLK0BF ,SCLK0 Buffer" "0,1" group.long 0x48++0x3 line.long 0x00 "CGU0_REVID,CGU0 Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree "CGU1" base ad:0x3108E000 width 16. group.long 0x0++0x3 line.long 0x00 "CGU1_CTL,CGU1 Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 30. " WFI ,Wait For Idle" "0,1" hexmask.long.byte 0x00 8.--14. 1. " MSEL ,Multiplier Select" bitfld.long 0x00 0. " DF ,Divide Frequency" "0,1" group.long 0x4++0x3 line.long 0x00 "CGU1_PLLCTL,CGU1 PLL Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 3. " PLLEN ,PLL Enable" "0,1" bitfld.long 0x00 2. " PLLDIS ,PLL Disable" "0,1" bitfld.long 0x00 1. " PLLBPCL ,PLL Bypass Clear" "0,1" newline bitfld.long 0x00 0. " PLLBPST ,PLL Bypass Set" "0,1" group.long 0x8++0x3 line.long 0x00 "CGU1_STAT,CGU1 Status Register" bitfld.long 0x00 21. " PCFGERR ,PLL Configuration Error" "0,1" bitfld.long 0x00 20. " WDIVERR ,Write to DIV Error" "0,1" bitfld.long 0x00 19. " WDFMSERR ,Write to DF or MSEL Error" "0,1" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" newline bitfld.long 0x00 16. " ADDRERR ,Address Error" "0,1" bitfld.long 0x00 15. " OSCWDSTATF ,Oscillator Watchdog Status Fault" "0,1" bitfld.long 0x00 12.--14. " OSCWDSTATFC ,Oscillator Watchdog Status Fault Code" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CLKSALGN ,Clock Alignment" "0,1" newline bitfld.long 0x00 2. " PLOCK ,PLL Lock" "0,1" bitfld.long 0x00 1. " PLLBP ,PLL Bypass" "0,1" bitfld.long 0x00 0. " PLLEN ,PLL Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "CGU1_DIV,CGU1 Clocks Divisor Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 30. " UPDT ,Update Clock Divisors" "0,1" bitfld.long 0x00 29. " ALGN ,Align" "0,1" hexmask.long.byte 0x00 22.--28. 1. " OSEL ,OCLK Divisor" newline bitfld.long 0x00 16.--20. " DSEL ,DCLK Divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 13.--15. " S1SEL ,SCLK 1 Divisor" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--12. " SYSSEL ,SYSCLK Divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--7. " S0SEL ,SCLK 0 Divisor" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--4. " CSEL ,CCLK Divisor" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x14++0x3 line.long 0x00 "CGU1_OSCWDCTL,CGU1 Oscillator Watchdog Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 23. " FAULTPINDIS ,Fault Pin disabled" "0,1" bitfld.long 0x00 15. " MONDIS ,Oscillator Watchdog Monitor functions disabled" "0,1" bitfld.long 0x00 14. " FAULTEN ,Fault enabled" "0,1" newline bitfld.long 0x00 13. " BOUEN ,Bad Oscillator Upper Frequency limit detection enabled" "0,1" bitfld.long 0x00 8.--12. " BOUF ,Bad Oscillator Upper Frequency limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 7. " CNGEN ,Clock not Good enabled" "0,1" bitfld.long 0x00 6. " HODEN ,Harmonic Oscillation Detection enabled" "0,1" newline bitfld.long 0x00 0.--5. " HODF ,Watchdog lower frequency limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x2C++0x3 line.long 0x00 "CGU1_CCBF_DIS,CGU1 Core Clock Buffer Disable Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 1. " CCBF1 ,Core Clock Buffer 1" "0,1" bitfld.long 0x00 0. " CCBF0 ,Core Clock Buffer 0" "0,1" group.long 0x30++0x3 line.long 0x00 "CGU1_CCBF_STAT,CGU1 Core Clock Buffer Status Register" bitfld.long 0x00 1. " CCBF1 ,Core Clock Buffer 1" "0,1" bitfld.long 0x00 0. " CCBF0 ,Core Clock Buffer 0" "0,1" group.long 0x38++0x3 line.long 0x00 "CGU1_SCBF_DIS,CGU1 System Clock Buffer Disable Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 3. " OUTCLKBF ,OCLK Buffer" "0,1" bitfld.long 0x00 2. " DCLKBF ,DCLK Buffer" "0,1" bitfld.long 0x00 1. " SCLK1BF ,SCLK1 Buffer" "0,1" newline bitfld.long 0x00 0. " SCLK0BF ,SCLK0 Buffer" "0,1" group.long 0x3C++0x3 line.long 0x00 "CGU1_SCBF_STAT,CGU1 System Clock Buffer Status Register" bitfld.long 0x00 3. " OCLKBF ,OCLK Buffer" "0,1" bitfld.long 0x00 2. " DCLKBF ,DCLK1 Buffer" "0,1" bitfld.long 0x00 1. " SCLK1BF ,SCLK1 Buffer" "0,1" bitfld.long 0x00 0. " SCLK0BF ,SCLK0 Buffer" "0,1" group.long 0x48++0x3 line.long 0x00 "CGU1_REVID,CGU1 Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree.end tree "CNT (General-Purpose Counter)" base ad:0x3100B000 width 13. group.long 0x0++0x3 line.long 0x00 "CNT0_CFG,CNT0 Configuration Register" bitfld.long 0x00 15. " INPDIS ,CUD and CDG Pin Input Disable" "0,1" bitfld.long 0x00 12.--13. " BNDMODE ,Boundary Register Mode" "0,1,2,3" bitfld.long 0x00 11. " ZMZC ,CZM Zeros Counter Enable" "0,1" bitfld.long 0x00 8.--10. " CNTMODE ,Counter Operating Mode" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 6. " CZMINV ,CZM Pin Polarity Invert" "0,1" bitfld.long 0x00 5. " CUDINV ,CUD Pin Polarity Invert" "0,1" bitfld.long 0x00 4. " CDGINV ,CDG Pin Polarity Invert" "0,1" bitfld.long 0x00 1. " DEBEN ,Debounce Enable" "0,1" newline bitfld.long 0x00 0. " EN ,Counter Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "CNT0_IMSK,CNT0 Interrupt Mask Register" bitfld.long 0x00 10. " CZMZ ,Counter Zeroed by Zero Marker Interrupt Enable" "0,1" bitfld.long 0x00 9. " CZME ,Zero Marker Error Interrupt Enable" "0,1" bitfld.long 0x00 8. " CZM ,CZM Pin/Pushbutton Interrupt Enable" "0,1" bitfld.long 0x00 7. " CZERO ,CNT_CNTR Counts To Zero Interrupt Enable" "0,1" newline bitfld.long 0x00 6. " COV15 ,Bit 15 Overflow Interrupt Enable" "0,1" bitfld.long 0x00 5. " COV31 ,Bit 31 Overflow Interrupt Enable" "0,1" bitfld.long 0x00 4. " MAXC ,Max Count Interrupt Enable" "0,1" bitfld.long 0x00 3. " MINC ,Min Count Interrupt Enable" "0,1" newline bitfld.long 0x00 2. " DC ,Downcount Interrupt Enable" "0,1" bitfld.long 0x00 1. " UC ,Upcount Interrupt Enable" "0,1" bitfld.long 0x00 0. " IC ,Illegal Gray/Binary Code Interrupt Enable" "0,1" group.long 0x8++0x3 line.long 0x00 "CNT0_STAT,CNT0 Status Register" bitfld.long 0x00 10. " CZMZ ,Counter Zeroed By Zero Marker Interrupt" "0,1" bitfld.long 0x00 9. " CZME ,Zero Marker Error Interrupt" "0,1" bitfld.long 0x00 8. " CZM ,CZM Pin/Pushbutton Interrupt" "0,1" bitfld.long 0x00 7. " CZERO ,CNT_CNTR Counts To Zero Interrupt" "0,1" newline bitfld.long 0x00 6. " COV15 ,Bit 15 Overflow Interrupt" "0,1" bitfld.long 0x00 5. " COV31 ,Bit 31 Overflow Interrupt" "0,1" bitfld.long 0x00 4. " MAXC ,Max Count Interrupt" "0,1" bitfld.long 0x00 3. " MINC ,Min Count Interrupt" "0,1" newline bitfld.long 0x00 2. " DC ,Down Count Interrupt" "0,1" bitfld.long 0x00 1. " UC ,Up Count Interrupt" "0,1" bitfld.long 0x00 0. " IC ,Illegal Gray/Binary Code Interrupt" "0,1" group.long 0xC++0x3 line.long 0x00 "CNT0_CMD,CNT0 Command Register" bitfld.long 0x00 12. " W1ZMONCE ,Write 1 Zero Marker Clear Once Enable" "0,1" bitfld.long 0x00 10. " W1LMAXMIN ,Write 1 MAX Copy from MIN" "0,1" bitfld.long 0x00 9. " W1LMAXCNT ,Write 1 MAX Capture from CNTR" "0,1" bitfld.long 0x00 8. " W1LMAXZERO ,Write 1 MAX to Zero" "0,1" newline bitfld.long 0x00 7. " W1LMINMAX ,Write 1 MIN Copy from MAX" "0,1" bitfld.long 0x00 5. " W1LMINCNT ,Write 1 MIN Capture from CNTR" "0,1" bitfld.long 0x00 4. " W1LMINZERO ,Write 1 MIN to Zero" "0,1" bitfld.long 0x00 3. " W1LCNTMAX ,Write 1 CNTR Load from MAX" "0,1" newline bitfld.long 0x00 2. " W1LCNTMIN ,Write 1 CNTR Load from MIN" "0,1" bitfld.long 0x00 0. " W1LCNTZERO ,Write 1 CNTR to Zero" "0,1" group.long 0x10++0x3 line.long 0x00 "CNT0_DEBNCE,CNT0 Debounce Register" bitfld.long 0x00 0.--4. " DPRESCALE ,Debounce Prescale" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x14++0x3 line.long 0x00 "CNT0_CNTR,CNT0 Counter Register" group.long 0x18++0x3 line.long 0x00 "CNT0_MAX,CNT0 Maximum Count Register" group.long 0x1C++0x3 line.long 0x00 "CNT0_MIN,CNT0 Minimum Count Register" tree.end tree "CRC (Cyclic Redundancy Check)" tree "CRC0" base ad:0x31001200 width 17. group.long 0x0++0x3 line.long 0x00 "CRC0_CTL,CRC0 Control Register" bitfld.long 0x00 22. " CMPMIRR ,COMPARE Register Mirroring" "0,1" bitfld.long 0x00 21. " POLYMIRR ,Polynomial Register Mirroring" "0,1" bitfld.long 0x00 20. " RSLTMIRR ,Result Register Mirroring" "0,1" bitfld.long 0x00 19. " FDSEL ,FIFO Data Select" "0,1" newline bitfld.long 0x00 18. " W16SWP ,Word16 Swapping" "0,1" bitfld.long 0x00 17. " BYTMIRR ,Byte Mirroring" "0,1" bitfld.long 0x00 16. " BITMIRR ,Bit Mirroring" "0,1" bitfld.long 0x00 13. " IRRSTALL ,Intermediate Result Ready Stall" "0,1" newline bitfld.long 0x00 12. " OBRSTALL ,Output Buffer Ready Stall" "0,1" bitfld.long 0x00 9. " AUTOCLRF ,Auto Clear to One" "0,1" bitfld.long 0x00 8. " AUTOCLRZ ,Auto Clear to Zero" "0,1" bitfld.long 0x00 4.--7. " OPMODE ,Operation Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. " BLKEN ,Block Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "CRC0_DCNT,CRC0 Data Word Count Register" group.long 0x8++0x3 line.long 0x00 "CRC0_DCNTRLD,CRC0 Data Word Count Reload Register" group.long 0x14++0x3 line.long 0x00 "CRC0_COMP,CRC0 Data Compare Register" group.long 0x18++0x3 line.long 0x00 "CRC0_FILLVAL,CRC0 Fill Value Register" group.long 0x1C++0x3 line.long 0x00 "CRC0_DFIFO,CRC0 Data FIFO Register" group.long 0x20++0x3 line.long 0x00 "CRC0_INEN,CRC0 Interrupt Enable Register" bitfld.long 0x00 4. " DCNTEXP ,Data Count Expired (Status) Interrupt Enable" "0,1" bitfld.long 0x00 1. " CMPERR ,Compare Error Interrupt Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "CRC0_INEN_SET,CRC0 Interrupt Enable Set Register" bitfld.long 0x00 4. " DCNTEXP ,Data Count Expired (Status) Interrupt Enable Set" "0,1" bitfld.long 0x00 1. " CMPERR ,Compare Error Interrupt" "0,1" group.long 0x28++0x3 line.long 0x00 "CRC0_INEN_CLR,CRC0 Interrupt Enable Clear Register" bitfld.long 0x00 4. " DCNTEXP ,Data Count Expired" "0,1" bitfld.long 0x00 1. " CMPERR ,Compare Error Clear" "0,1" group.long 0x2C++0x3 line.long 0x00 "CRC0_POLY,CRC0 Polynomial Register" group.long 0x40++0x3 line.long 0x00 "CRC0_STAT,CRC0 Status Register" bitfld.long 0x00 20.--22. " FSTAT ,FIFO Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 19. " LUTDONE ,Look-Up Table Done" "0,1" bitfld.long 0x00 18. " IRR ,Intermediate Result Ready" "0,1" bitfld.long 0x00 17. " OBR ,Output Buffer Ready" "0,1" newline bitfld.long 0x00 16. " IBR ,Input Buffer Ready" "0,1" bitfld.long 0x00 4. " DCNTEXP ,Data Count Expired" "0,1" bitfld.long 0x00 1. " CMPERR ,Compare Error" "0,1" group.long 0x44++0x3 line.long 0x00 "CRC0_DCNTCAP,CRC0 Data Count Capture Register" group.long 0x4C++0x3 line.long 0x00 "CRC0_RESULT_FIN,CRC0 CRC Final Result Register" group.long 0x50++0x3 line.long 0x00 "CRC0_RESULT_CUR,CRC0 CRC Current Result Register" tree.end tree "CRC1" base ad:0x31001300 width 17. group.long 0x0++0x3 line.long 0x00 "CRC1_CTL,CRC1 Control Register" bitfld.long 0x00 22. " CMPMIRR ,COMPARE Register Mirroring" "0,1" bitfld.long 0x00 21. " POLYMIRR ,Polynomial Register Mirroring" "0,1" bitfld.long 0x00 20. " RSLTMIRR ,Result Register Mirroring" "0,1" bitfld.long 0x00 19. " FDSEL ,FIFO Data Select" "0,1" newline bitfld.long 0x00 18. " W16SWP ,Word16 Swapping" "0,1" bitfld.long 0x00 17. " BYTMIRR ,Byte Mirroring" "0,1" bitfld.long 0x00 16. " BITMIRR ,Bit Mirroring" "0,1" bitfld.long 0x00 13. " IRRSTALL ,Intermediate Result Ready Stall" "0,1" newline bitfld.long 0x00 12. " OBRSTALL ,Output Buffer Ready Stall" "0,1" bitfld.long 0x00 9. " AUTOCLRF ,Auto Clear to One" "0,1" bitfld.long 0x00 8. " AUTOCLRZ ,Auto Clear to Zero" "0,1" bitfld.long 0x00 4.--7. " OPMODE ,Operation Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0. " BLKEN ,Block Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "CRC1_DCNT,CRC1 Data Word Count Register" group.long 0x8++0x3 line.long 0x00 "CRC1_DCNTRLD,CRC1 Data Word Count Reload Register" group.long 0x14++0x3 line.long 0x00 "CRC1_COMP,CRC1 Data Compare Register" group.long 0x18++0x3 line.long 0x00 "CRC1_FILLVAL,CRC1 Fill Value Register" group.long 0x1C++0x3 line.long 0x00 "CRC1_DFIFO,CRC1 Data FIFO Register" group.long 0x20++0x3 line.long 0x00 "CRC1_INEN,CRC1 Interrupt Enable Register" bitfld.long 0x00 4. " DCNTEXP ,Data Count Expired (Status) Interrupt Enable" "0,1" bitfld.long 0x00 1. " CMPERR ,Compare Error Interrupt Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "CRC1_INEN_SET,CRC1 Interrupt Enable Set Register" bitfld.long 0x00 4. " DCNTEXP ,Data Count Expired (Status) Interrupt Enable Set" "0,1" bitfld.long 0x00 1. " CMPERR ,Compare Error Interrupt" "0,1" group.long 0x28++0x3 line.long 0x00 "CRC1_INEN_CLR,CRC1 Interrupt Enable Clear Register" bitfld.long 0x00 4. " DCNTEXP ,Data Count Expired" "0,1" bitfld.long 0x00 1. " CMPERR ,Compare Error Clear" "0,1" group.long 0x2C++0x3 line.long 0x00 "CRC1_POLY,CRC1 Polynomial Register" group.long 0x40++0x3 line.long 0x00 "CRC1_STAT,CRC1 Status Register" bitfld.long 0x00 20.--22. " FSTAT ,FIFO Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 19. " LUTDONE ,Look-Up Table Done" "0,1" bitfld.long 0x00 18. " IRR ,Intermediate Result Ready" "0,1" bitfld.long 0x00 17. " OBR ,Output Buffer Ready" "0,1" newline bitfld.long 0x00 16. " IBR ,Input Buffer Ready" "0,1" bitfld.long 0x00 4. " DCNTEXP ,Data Count Expired" "0,1" bitfld.long 0x00 1. " CMPERR ,Compare Error" "0,1" group.long 0x44++0x3 line.long 0x00 "CRC1_DCNTCAP,CRC1 Data Count Capture Register" group.long 0x4C++0x3 line.long 0x00 "CRC1_RESULT_FIN,CRC1 CRC Final Result Register" group.long 0x50++0x3 line.long 0x00 "CRC1_RESULT_CUR,CRC1 CRC Current Result Register" tree.end tree.end tree "CSPFT (Programmable Flow Trace)" tree "CSPFT0" base ad:0x31103000 width 19. group.long 0x0++0x3 line.long 0x00 "CSPFT0_CTL,CSPFT0 Main Control Register" bitfld.long 0x00 29. " RSENA ,Return Stack Enable" "0,1" bitfld.long 0x00 14.--15. " CIDSZ ,Context ID Size" "0,1,2,3" bitfld.long 0x00 10. " PB ,Programming Bit" "0,1" bitfld.long 0x00 8. " BBRAN ,Branch Broadcast" "0,1" group.long 0x4++0x3 line.long 0x00 "CSPFT0_HWFEAT,CSPFT0 Hardware Feature Register" bitfld.long 0x00 24.--25. " NCIDC ,Number of Context ID Comparators" "0,1,2,3" bitfld.long 0x00 20.--22. " NEXO ,Number of External Outputs" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17.--19. " NEXI ,Number of External Inputs" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13.--15. " NCNTR ,Number of Counters" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--3. " NACMP ,Number of Pairs of Address Comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8++0x3 line.long 0x00 "CSPFT0_TRIGGER,CSPFT0 Trigger Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x10++0x3 line.long 0x00 "CSPFT0_STAT,CSPFT0 Status Register" bitfld.long 0x00 3. " TRIG ,Trigger Bit" "0,1" bitfld.long 0x00 2. " TSS ,Trace Start/Stop Bit Status" "0,1" bitfld.long 0x00 1. " PB ,Prog Bit Status" "0,1" bitfld.long 0x00 0. " OF ,Overflow" "0,1" group.long 0x18++0x3 line.long 0x00 "CSPFT0_TSSCTL,CSPFT0 TraceEnable Start/Stop Control Register" hexmask.long.word 0x00 16.--31. 1. " STOP ,Stop Address Comparator Select Bits" hexmask.long.word 0x00 0.--15. 1. " START ,Start Address Comparator Select Bits" group.long 0x20++0x3 line.long 0x00 "CSPFT0_TEEVENT,CSPFT0 TraceEnable Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x24++0x3 line.long 0x00 "CSPFT0_TECTL,CSPFT0 TraceEnable Control Register" bitfld.long 0x00 25. " TSSCENA ,Trace Start and Stop Control Enable" "0,1" bitfld.long 0x00 24. " EXCL ,Include and Exclude Control" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ARCS ,Address Range Comparator Select Bits" group.long 0x40++0x3 line.long 0x00 "CSPFT0_ACVR0,CSPFT0 Address Comparator Value Register" group.long 0x44++0x3 line.long 0x00 "CSPFT0_ACVR1,CSPFT0 Address Comparator Value Register" group.long 0x48++0x3 line.long 0x00 "CSPFT0_ACVR2,CSPFT0 Address Comparator Value Register" group.long 0x4C++0x3 line.long 0x00 "CSPFT0_ACVR3,CSPFT0 Address Comparator Value Register" group.long 0x80++0x3 line.long 0x00 "CSPFT0_ACTR0,CSPFT0 Address Comparator Access Type Register" bitfld.long 0x00 8.--9. " CIDCTRL ,Context ID Comparator Control" "0,1,2,3" group.long 0x84++0x3 line.long 0x00 "CSPFT0_ACTR1,CSPFT0 Address Comparator Access Type Register" bitfld.long 0x00 8.--9. " CIDCTRL ,Context ID Comparator Control" "0,1,2,3" group.long 0x88++0x3 line.long 0x00 "CSPFT0_ACTR2,CSPFT0 Address Comparator Access Type Register" bitfld.long 0x00 8.--9. " CIDCTRL ,Context ID Comparator Control" "0,1,2,3" group.long 0x8C++0x3 line.long 0x00 "CSPFT0_ACTR3,CSPFT0 Address Comparator Access Type Register" bitfld.long 0x00 8.--9. " CIDCTRL ,Context ID Comparator Control" "0,1,2,3" group.long 0x140++0x3 line.long 0x00 "CSPFT0_CNTRLDVR0,CSPFT0 Counter Reload Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Counter Initial Value" group.long 0x144++0x3 line.long 0x00 "CSPFT0_CNTRLDVR1,CSPFT0 Counter Reload Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Counter Initial Value" group.long 0x150++0x3 line.long 0x00 "CSPFT0_CNTENR0,CSPFT0 Counter Enable Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x154++0x3 line.long 0x00 "CSPFT0_CNTENR1,CSPFT0 Counter Enable Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x160++0x3 line.long 0x00 "CSPFT0_CNTRLDEVR0,CSPFT0 Counter Reload Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x164++0x3 line.long 0x00 "CSPFT0_CNTRLDEVR1,CSPFT0 Counter Reload Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x170++0x3 line.long 0x00 "CSPFT0_CNTVR0,CSPFT0 Counter Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Current Counter Value" group.long 0x174++0x3 line.long 0x00 "CSPFT0_CNTVR1,CSPFT0 Counter Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Current Counter Value" group.long 0x1A0++0x3 line.long 0x00 "CSPFT0_EXTOUTEVR0,CSPFT0 External Output Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x1A4++0x3 line.long 0x00 "CSPFT0_EXTOUTEVR1,CSPFT0 External Output Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x1A8++0x3 line.long 0x00 "CSPFT0_EXTOUTEVR2,CSPFT0 External Output Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x1AC++0x3 line.long 0x00 "CSPFT0_EXTOUTEVR3,CSPFT0 External Output Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x1B0++0x3 line.long 0x00 "CSPFT0_CIDCVR0,CSPFT0 Context ID Comparator Value" group.long 0x1BC++0x3 line.long 0x00 "CSPFT0_CIDCMR,CSPFT0 Context ID Comparator Mask Register" group.long 0x1E0++0x3 line.long 0x00 "CSPFT0_SYNCFR,CSPFT0 Synchronization Frequency Register" hexmask.long.word 0x00 0.--11. 1. " SFREQ ,Synchronization frequency" group.long 0x1E8++0x3 line.long 0x00 "CSPFT0_CCER,CSPFT0 Configuration Code Extension Register" bitfld.long 0x00 26. " VEI ,Virtualization Extensions Implemented" "0,1" bitfld.long 0x00 23. " RSI ,Return Stack Implemented" "0,1" bitfld.long 0x00 22. " TSI ,Time Stamping Implemented" "0,1" group.long 0x200++0x3 line.long 0x00 "CSPFT0_TRACEIDR,CSPFT0 CoreSight Trace ID Register" hexmask.long.byte 0x00 0.--6. 1. " TID ,Trace ID" group.long 0xFA0++0x3 line.long 0x00 "CSPFT0_CLAIMSET,CSPFT0 Claim Tag Set Register" bitfld.long 0x00 0.--3. " TAGS ,Supported Tags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFA4++0x3 line.long 0x00 "CSPFT0_CLAIMCLR,CSPFT0 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " TAGS ,Tags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFB0++0x3 line.long 0x00 "CSPFT0_LAR,CSPFT0 Lock Access Register" group.long 0xFB4++0x3 line.long 0x00 "CSPFT0_LSR,CSPFT0 Lock Status Register" bitfld.long 0x00 1. " LOCKED ,Lock Status" "0,1" bitfld.long 0x00 0. " LOCKEN ,Locking Supported" "0,1" group.long 0xFB8++0x3 line.long 0x00 "CSPFT0_AUTHSTATUS,CSPFT0 Authentication Status Register" bitfld.long 0x00 7. " ONE ,Always reads as one" "0,1" bitfld.long 0x00 6. " DBGEN ,Debug Enabled" "0,1" group.long 0xFCC++0x3 line.long 0x00 "CSPFT0_DEVTYPE,CSPFT0 Device Type Identifier Register" bitfld.long 0x00 4.--7. " STYPE ,Sub Type = DSP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " TYPE ,Device Type = Trace Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFD0++0x3 line.long 0x00 "CSPFT0_PID4,CSPFT0 Peripheral ID4 Register" bitfld.long 0x00 4.--7. " SIZE ,Number of 4K Blocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " JEOP106CC ,JEOP106 continuation code (number of leading 0x7Fs)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFE0++0x3 line.long 0x00 "CSPFT0_PID0,CSPFT0 Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PARTNUM ,Part Number" group.long 0xFE4++0x3 line.long 0x00 "CSPFT0_PID1,CSPFT0 Peripheral ID1 Register" bitfld.long 0x00 4.--7. " JEP106 ,JEDEC JEP106 Manufacturer ID code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " PARTNUM ,Part Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFE8++0x3 line.long 0x00 "CSPFT0_PID2,CSPFT0 Peripheral ID2 Register" bitfld.long 0x00 4.--7. " REV ,Peripheral Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. " JEDECASGN ,A JEDEC Assigned Value is Used" "0,1" bitfld.long 0x00 0.--2. " JEP106 ,JEDEC JEP106 Manufacturer ID code" "0,1,2,3,4,5,6,7" group.long 0xFEC++0x3 line.long 0x00 "CSPFT0_PID3,CSPFT0 Peripheral ID3 Register" bitfld.long 0x00 4.--7. " REVAND ,Field to mark metal fix revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " CUSTMOD ,Customer Modified" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFF0++0x3 line.long 0x00 "CSPFT0_CID0,CSPFT0 Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " COMPID ,Component ID" group.long 0xFF4++0x3 line.long 0x00 "CSPFT0_CID1,CSPFT0 Component ID1 Register" hexmask.long.byte 0x00 0.--7. 1. " COMPID ,Component ID" group.long 0xFF8++0x3 line.long 0x00 "CSPFT0_CID2,CSPFT0 Component ID2 Register" hexmask.long.byte 0x00 0.--7. 1. " COMPID ,Component ID" group.long 0xFFC++0x3 line.long 0x00 "CSPFT0_CID3,CSPFT0 Component ID3 Register" hexmask.long.byte 0x00 0.--7. 1. " COMPID ,Component ID" tree.end tree "CSPFT1" base ad:0x31107000 width 19. group.long 0x0++0x3 line.long 0x00 "CSPFT1_CTL,CSPFT1 Main Control Register" bitfld.long 0x00 29. " RSENA ,Return Stack Enable" "0,1" bitfld.long 0x00 14.--15. " CIDSZ ,Context ID Size" "0,1,2,3" bitfld.long 0x00 10. " PB ,Programming Bit" "0,1" bitfld.long 0x00 8. " BBRAN ,Branch Broadcast" "0,1" group.long 0x4++0x3 line.long 0x00 "CSPFT1_HWFEAT,CSPFT1 Hardware Feature Register" bitfld.long 0x00 24.--25. " NCIDC ,Number of Context ID Comparators" "0,1,2,3" bitfld.long 0x00 20.--22. " NEXO ,Number of External Outputs" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17.--19. " NEXI ,Number of External Inputs" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13.--15. " NCNTR ,Number of Counters" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 0.--3. " NACMP ,Number of Pairs of Address Comparators" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8++0x3 line.long 0x00 "CSPFT1_TRIGGER,CSPFT1 Trigger Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x10++0x3 line.long 0x00 "CSPFT1_STAT,CSPFT1 Status Register" bitfld.long 0x00 3. " TRIG ,Trigger Bit" "0,1" bitfld.long 0x00 2. " TSS ,Trace Start/Stop Bit Status" "0,1" bitfld.long 0x00 1. " PB ,Prog Bit Status" "0,1" bitfld.long 0x00 0. " OF ,Overflow" "0,1" group.long 0x18++0x3 line.long 0x00 "CSPFT1_TSSCTL,CSPFT1 TraceEnable Start/Stop Control Register" hexmask.long.word 0x00 16.--31. 1. " STOP ,Stop Address Comparator Select Bits" hexmask.long.word 0x00 0.--15. 1. " START ,Start Address Comparator Select Bits" group.long 0x20++0x3 line.long 0x00 "CSPFT1_TEEVENT,CSPFT1 TraceEnable Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x24++0x3 line.long 0x00 "CSPFT1_TECTL,CSPFT1 TraceEnable Control Register" bitfld.long 0x00 25. " TSSCENA ,Trace Start and Stop Control Enable" "0,1" bitfld.long 0x00 24. " EXCL ,Include and Exclude Control" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ARCS ,Address Range Comparator Select Bits" group.long 0x40++0x3 line.long 0x00 "CSPFT1_ACVR0,CSPFT1 Address Comparator Value Register" group.long 0x44++0x3 line.long 0x00 "CSPFT1_ACVR1,CSPFT1 Address Comparator Value Register" group.long 0x48++0x3 line.long 0x00 "CSPFT1_ACVR2,CSPFT1 Address Comparator Value Register" group.long 0x4C++0x3 line.long 0x00 "CSPFT1_ACVR3,CSPFT1 Address Comparator Value Register" group.long 0x80++0x3 line.long 0x00 "CSPFT1_ACTR0,CSPFT1 Address Comparator Access Type Register" bitfld.long 0x00 8.--9. " CIDCTRL ,Context ID Comparator Control" "0,1,2,3" group.long 0x84++0x3 line.long 0x00 "CSPFT1_ACTR1,CSPFT1 Address Comparator Access Type Register" bitfld.long 0x00 8.--9. " CIDCTRL ,Context ID Comparator Control" "0,1,2,3" group.long 0x88++0x3 line.long 0x00 "CSPFT1_ACTR2,CSPFT1 Address Comparator Access Type Register" bitfld.long 0x00 8.--9. " CIDCTRL ,Context ID Comparator Control" "0,1,2,3" group.long 0x8C++0x3 line.long 0x00 "CSPFT1_ACTR3,CSPFT1 Address Comparator Access Type Register" bitfld.long 0x00 8.--9. " CIDCTRL ,Context ID Comparator Control" "0,1,2,3" group.long 0x140++0x3 line.long 0x00 "CSPFT1_CNTRLDVR0,CSPFT1 Counter Reload Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Counter Initial Value" group.long 0x144++0x3 line.long 0x00 "CSPFT1_CNTRLDVR1,CSPFT1 Counter Reload Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Counter Initial Value" group.long 0x150++0x3 line.long 0x00 "CSPFT1_CNTENR0,CSPFT1 Counter Enable Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x154++0x3 line.long 0x00 "CSPFT1_CNTENR1,CSPFT1 Counter Enable Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x160++0x3 line.long 0x00 "CSPFT1_CNTRLDEVR0,CSPFT1 Counter Reload Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x164++0x3 line.long 0x00 "CSPFT1_CNTRLDEVR1,CSPFT1 Counter Reload Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x170++0x3 line.long 0x00 "CSPFT1_CNTVR0,CSPFT1 Counter Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Current Counter Value" group.long 0x174++0x3 line.long 0x00 "CSPFT1_CNTVR1,CSPFT1 Counter Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Current Counter Value" group.long 0x1A0++0x3 line.long 0x00 "CSPFT1_EXTOUTEVR0,CSPFT1 External Output Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x1A4++0x3 line.long 0x00 "CSPFT1_EXTOUTEVR1,CSPFT1 External Output Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x1A8++0x3 line.long 0x00 "CSPFT1_EXTOUTEVR2,CSPFT1 External Output Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x1AC++0x3 line.long 0x00 "CSPFT1_EXTOUTEVR3,CSPFT1 External Output Event Register" bitfld.long 0x00 14.--16. " FUNC ,Function" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 7.--13. 1. " RESB ,Resource B" hexmask.long.byte 0x00 0.--6. 1. " RESA ,Resource A" group.long 0x1B0++0x3 line.long 0x00 "CSPFT1_CIDCVR0,CSPFT1 Context ID Comparator Value" group.long 0x1BC++0x3 line.long 0x00 "CSPFT1_CIDCMR,CSPFT1 Context ID Comparator Mask Register" group.long 0x1E0++0x3 line.long 0x00 "CSPFT1_SYNCFR,CSPFT1 Synchronization Frequency Register" hexmask.long.word 0x00 0.--11. 1. " SFREQ ,Synchronization frequency" group.long 0x1E8++0x3 line.long 0x00 "CSPFT1_CCER,CSPFT1 Configuration Code Extension Register" bitfld.long 0x00 26. " VEI ,Virtualization Extensions Implemented" "0,1" bitfld.long 0x00 23. " RSI ,Return Stack Implemented" "0,1" bitfld.long 0x00 22. " TSI ,Time Stamping Implemented" "0,1" group.long 0x200++0x3 line.long 0x00 "CSPFT1_TRACEIDR,CSPFT1 CoreSight Trace ID Register" hexmask.long.byte 0x00 0.--6. 1. " TID ,Trace ID" group.long 0xFA0++0x3 line.long 0x00 "CSPFT1_CLAIMSET,CSPFT1 Claim Tag Set Register" bitfld.long 0x00 0.--3. " TAGS ,Supported Tags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFA4++0x3 line.long 0x00 "CSPFT1_CLAIMCLR,CSPFT1 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " TAGS ,Tags" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFB0++0x3 line.long 0x00 "CSPFT1_LAR,CSPFT1 Lock Access Register" group.long 0xFB4++0x3 line.long 0x00 "CSPFT1_LSR,CSPFT1 Lock Status Register" bitfld.long 0x00 1. " LOCKED ,Lock Status" "0,1" bitfld.long 0x00 0. " LOCKEN ,Locking Supported" "0,1" group.long 0xFB8++0x3 line.long 0x00 "CSPFT1_AUTHSTATUS,CSPFT1 Authentication Status Register" bitfld.long 0x00 7. " ONE ,Always reads as one" "0,1" bitfld.long 0x00 6. " DBGEN ,Debug Enabled" "0,1" group.long 0xFCC++0x3 line.long 0x00 "CSPFT1_DEVTYPE,CSPFT1 Device Type Identifier Register" bitfld.long 0x00 4.--7. " STYPE ,Sub Type = DSP" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " TYPE ,Device Type = Trace Source" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFD0++0x3 line.long 0x00 "CSPFT1_PID4,CSPFT1 Peripheral ID4 Register" bitfld.long 0x00 4.--7. " SIZE ,Number of 4K Blocks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " JEOP106CC ,JEOP106 continuation code (number of leading 0x7Fs)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFE0++0x3 line.long 0x00 "CSPFT1_PID0,CSPFT1 Peripheral ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " PARTNUM ,Part Number" group.long 0xFE4++0x3 line.long 0x00 "CSPFT1_PID1,CSPFT1 Peripheral ID1 Register" bitfld.long 0x00 4.--7. " JEP106 ,JEDEC JEP106 Manufacturer ID code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " PARTNUM ,Part Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFE8++0x3 line.long 0x00 "CSPFT1_PID2,CSPFT1 Peripheral ID2 Register" bitfld.long 0x00 4.--7. " REV ,Peripheral Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. " JEDECASGN ,A JEDEC Assigned Value is Used" "0,1" bitfld.long 0x00 0.--2. " JEP106 ,JEDEC JEP106 Manufacturer ID code" "0,1,2,3,4,5,6,7" group.long 0xFEC++0x3 line.long 0x00 "CSPFT1_PID3,CSPFT1 Peripheral ID3 Register" bitfld.long 0x00 4.--7. " REVAND ,Field to mark metal fix revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " CUSTMOD ,Customer Modified" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFF0++0x3 line.long 0x00 "CSPFT1_CID0,CSPFT1 Component ID0 Register" hexmask.long.byte 0x00 0.--7. 1. " COMPID ,Component ID" group.long 0xFF4++0x3 line.long 0x00 "CSPFT1_CID1,CSPFT1 Component ID1 Register" hexmask.long.byte 0x00 0.--7. 1. " COMPID ,Component ID" group.long 0xFF8++0x3 line.long 0x00 "CSPFT1_CID2,CSPFT1 Component ID2 Register" hexmask.long.byte 0x00 0.--7. 1. " COMPID ,Component ID" group.long 0xFFC++0x3 line.long 0x00 "CSPFT1_CID3,CSPFT1 Component ID3 Register" hexmask.long.byte 0x00 0.--7. 1. " COMPID ,Component ID" tree.end tree.end tree "CSTMC" tree "CSTMC0" base ad:0x31109304 width 17. group.long 0x0++0x3 line.long 0x00 "CSTMC0_FFCR,CSTMC0 Formatter and Flush Control Register" bitfld.long 0x00 6. " FlushMan_R ,Manual Flush Completion Status" "0,1" group.long 0xC9C++0x3 line.long 0x00 "CSTMC0_CLAIMSET,CSTMC0 Claim Tag Set Register" bitfld.long 0x00 0.--3. " CLAIMSET_R ,Claim Tag Implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xCA0++0x3 line.long 0x00 "CSTMC0_CLAIMCLR,CSTMC0 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " CLAIMCLR_R ,Claim Tag Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree "CSTMC1" base ad:0x3110A304 width 17. group.long 0x0++0x3 line.long 0x00 "CSTMC1_FFCR,CSTMC1 Formatter and Flush Control Register" bitfld.long 0x00 6. " FlushMan_R ,Manual Flush Completion Status" "0,1" group.long 0xC9C++0x3 line.long 0x00 "CSTMC1_CLAIMSET,CSTMC1 Claim Tag Set Register" bitfld.long 0x00 0.--3. " CLAIMSET_R ,Claim Tag Implemented" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xCA0++0x3 line.long 0x00 "CSTMC1_CLAIMCLR,CSTMC1 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " CLAIMCLR_R ,Claim Tag Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree.end tree "CTI (Cross Trigger Interface)" tree "CTI0" base ad:0x31128000 width 23. group.long 0x0++0x3 line.long 0x00 "CTI0_CTICONTROL,CTI0 CTI Control Register" bitfld.long 0x00 0. " GLBEN ,Global CTI Enable" "0,1" group.long 0x10++0x3 line.long 0x00 "CTI0_CTIINTACK,CTI0 CTI Interrupt Acknowledge Register" hexmask.long.byte 0x00 0.--7. 1. " INTACK ,Interrupt Acknowledge" group.long 0x14++0x3 line.long 0x00 "CTI0_CTIAPPSET,CTI0 CTI Application Trigger Set Register" bitfld.long 0x00 0.--3. " APPSET ,Set Channel Event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x3 line.long 0x00 "CTI0_CTIAPPCLEAR,CTI0 CTI Application Trigger Clear Register" bitfld.long 0x00 0.--3. " APPCLEAR ,Channel Clear" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C++0x3 line.long 0x00 "CTI0_CTIAPPPULSE,CTI0 CTI Application Pulse Register" bitfld.long 0x00 0.--3. " Bit_0APPULSE ,Channel Event Pulse" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20++0x3 line.long 0x00 "CTI0_CTIINEN0,CTI0 CTI Trigger 0 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24++0x3 line.long 0x00 "CTI0_CTIINEN1,CTI0 CTI Trigger 1 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x28++0x3 line.long 0x00 "CTI0_CTIINEN2,CTI0 CTI Trigger 2 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2C++0x3 line.long 0x00 "CTI0_CTIINEN3,CTI0 CTI Trigger 3 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x30++0x3 line.long 0x00 "CTI0_CTIINEN4,CTI0 CTI Trigger 4 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x34++0x3 line.long 0x00 "CTI0_CTIINEN5,CTI0 CTI Trigger 5 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x38++0x3 line.long 0x00 "CTI0_CTIINEN6,CTI0 CTI Trigger 6 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3C++0x3 line.long 0x00 "CTI0_CTIINEN7,CTI0 CTI Trigger 7 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA0++0x3 line.long 0x00 "CTI0_CTIOUTEN0,CTI0 CTI Channel to Trigger 0 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA4++0x3 line.long 0x00 "CTI0_CTIOUTEN1,CTI0 CTI Channel to Trigger 1 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA8++0x3 line.long 0x00 "CTI0_CTIOUTEN2,CTI0 CTI Channel to Trigger 2 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xAC++0x3 line.long 0x00 "CTI0_CTIOUTEN3,CTI0 CTI Channel to Trigger 3 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB0++0x3 line.long 0x00 "CTI0_CTIOUTEN4,CTI0 CTI Channel to Trigger 4 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB4++0x3 line.long 0x00 "CTI0_CTIOUTEN5,CTI0 CTI Channel to Trigger 5 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB8++0x3 line.long 0x00 "CTI0_CTIOUTEN6,CTI0 CTI Channel to Trigger 6 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xBC++0x3 line.long 0x00 "CTI0_CTIOUTEN7,CTI0 CTI Channel to Trigger 7 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x130++0x3 line.long 0x00 "CTI0_CTITRIGINSTATUS,CTI0 CTI Trigger In Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGINSTATUS ,Trigger In Status" group.long 0x134++0x3 line.long 0x00 "CTI0_CTITRIGOUTSTATUS,CTI0 CTI Trigger Out Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGOUTSTATUS ,Trigger Output Status" group.long 0x138++0x3 line.long 0x00 "CTI0_CTICHINSTATUS,CTI0 CTI Channel In Status Register" bitfld.long 0x00 0.--3. " CTCHINSTATUS ,Channel Input Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13C++0x3 line.long 0x00 "CTI0_CTICHOUTSTATUS,CTI0 CTI Channel Out Status Register" bitfld.long 0x00 0.--3. " CTCHOUTSTATUS ,Channel Out Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x3 line.long 0x00 "CTI0_CTIGATE,CTI0 Enable CTI Channel Gate Register" bitfld.long 0x00 3. " CTIGATEEN3 ,Enable CTICHOUT3" "0,1" bitfld.long 0x00 2. " CTIGATEEN2 ,Enable CTICHOUT2" "0,1" bitfld.long 0x00 1. " CTIGATEEN1 ,Enable CTICHOUT1" "0,1" bitfld.long 0x00 0. " CTIGATEEN0 ,Enable CTICHOUT0" "0,1" group.long 0x144++0x3 line.long 0x00 "CTI0_ASICCTL,CTI0 External Multiplexor Control Register" hexmask.long.byte 0x00 0.--7. 1. " ASICCTL ,ASIC Control" group.long 0xEDC++0x3 line.long 0x00 "CTI0_ITCHINACK,CTI0 ITCHINACK" bitfld.long 0x00 0.--3. " CTCHINACK ,Set the value of the CTCHINACK outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE0++0x3 line.long 0x00 "CTI0_ITTRIGINACK,CTI0 ITTRIGINACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGINACK ,Set the value of the CTTRIGINACK outputs" group.long 0xEE4++0x3 line.long 0x00 "CTI0_ITCHOUT,CTI0 ITCHOUT" bitfld.long 0x00 0.--3. " CTCHOUT ,Set the value of the CTCHOUT outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE8++0x3 line.long 0x00 "CTI0_ITTRIGOUT,CTI0 ITTRIGOUT" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUT ,Set the value of the CTTRIGOUT outputs" group.long 0xEEC++0x3 line.long 0x00 "CTI0_ITCHOUTACK,CTI0 ITCHOUTACK" bitfld.long 0x00 0.--3. " CTCHOUTACK ,Read the values of the CTCHOUTACK inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF0++0x3 line.long 0x00 "CTI0_ITTRIGOUTACK,CTI0 ITTRIGOUTACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUTACK ,Read the values of the CTTRIGOUTACK inputs" group.long 0xEF4++0x3 line.long 0x00 "CTI0_ITCHIN,CTI0 ITCHIN" bitfld.long 0x00 0.--3. " CTCHIN ,Read the values of the CTCHIN inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF8++0x3 line.long 0x00 "CTI0_ITTRIGIN,CTI0 ITTRIGIN" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGIN ,Read the values of the CTTRIGIN inputs" group.long 0xF00++0x3 line.long 0x00 "CTI0_ITCTRL,CTI0 Integration Mode Control Register" bitfld.long 0x00 0. " INTEGRATION_MODE ,Integration Mode Enable" "0,1" group.long 0xFA0++0x3 line.long 0x00 "CTI0_CLAIMSET,CTI0 Claim Tag Set Register" bitfld.long 0x00 0.--3. " CLAIMSET ,Claim Tag Set Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFA4++0x3 line.long 0x00 "CTI0_CLAIMCLR,CTI0 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " CLAIMCLR ,Claim Tag Clear Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFB0++0x3 line.long 0x00 "CTI0_LAR,CTI0 Lock Access Register" group.long 0xFB4++0x3 line.long 0x00 "CTI0_LSR,CTI0 Lock Status Register" bitfld.long 0x00 1. " ACCESS ,Access Blocked to Device" "0,1" bitfld.long 0x00 0. " LOCK ,Lock Exists for Device" "0,1" group.long 0xFB8++0x3 line.long 0x00 "CTI0_AUTHSTATUS,CTI0 Authentication Status" bitfld.long 0x00 3. " NDBG_EN ,Non-invasive Debug Enabled Status" "0,1" bitfld.long 0x00 2. " NDBG_CTL ,Non-invasive Debug Controlled" "0,1" bitfld.long 0x00 1. " IDBG_EN ,Invasive Debug Enable Status" "0,1" bitfld.long 0x00 0. " IDBG_CTL ,Invasive Debug Controlled" "0,1" group.long 0xFC8++0x3 line.long 0x00 "CTI0_DEVID,CTI0 Device ID" hexmask.long.tbyte 0x00 0.--19. 1. " DEVID ,Device ID Field" group.long 0xFCC++0x3 line.long 0x00 "CTI0_DEVTYPE,CTI0 Device Type" hexmask.long.byte 0x00 0.--7. 1. " DEVTYPE ,Device Type Field" group.long 0xFD0++0x3 line.long 0x00 "CTI0_PERIPHID4,CTI0 Peripheral ID4" hexmask.long.byte 0x00 0.--7. 1. " PID4 ,Peripheral ID4 Field" group.long 0xFD4++0x3 line.long 0x00 "CTI0_PERIPHID5,CTI0 Peripheral ID5" hexmask.long.byte 0x00 0.--7. 1. " PID5 ,Peripheral ID5 Field" group.long 0xFD8++0x3 line.long 0x00 "CTI0_PERIPHID6,CTI0 Peripheral ID6" hexmask.long.byte 0x00 0.--7. 1. " PID6 ,Peripheral ID6 Field" group.long 0xFDC++0x3 line.long 0x00 "CTI0_PERIPHID7,CTI0 Peripheral ID7" hexmask.long.byte 0x00 0.--7. 1. " PID7 ,Peripheral ID7 Field" group.long 0xFE0++0x3 line.long 0x00 "CTI0_PERIPHID0,CTI0 Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " PID0 ,Peripheral ID0 Field" group.long 0xFE4++0x3 line.long 0x00 "CTI0_PERIPHID1,CTI0 Peripheral ID1" hexmask.long.byte 0x00 0.--7. 1. " PID1 ,Peripheral ID1 Field" group.long 0xFE8++0x3 line.long 0x00 "CTI0_PERIPHID2,CTI0 Peripheral ID2" hexmask.long.byte 0x00 0.--7. 1. " PID2 ,Peripheral ID2 Field" group.long 0xFEC++0x3 line.long 0x00 "CTI0_PERIPHID3,CTI0 Peripheral ID3" hexmask.long.byte 0x00 0.--7. 1. " PID3 ,Peripheral ID3 Field" group.long 0xFF0++0x3 line.long 0x00 "CTI0_COMPID0,CTI0 Component ID0" hexmask.long.byte 0x00 0.--7. 1. " ID0 ,Component ID0 Field" group.long 0xFF4++0x3 line.long 0x00 "CTI0_COMPID1,CTI0 Component ID1" hexmask.long.byte 0x00 0.--7. 1. " ID1 ,Component ID1 Field" group.long 0xFF8++0x3 line.long 0x00 "CTI0_COMPID2,CTI0 Component ID2" hexmask.long.byte 0x00 0.--7. 1. " ID2 ,Component ID2 Field" group.long 0xFFC++0x3 line.long 0x00 "CTI0_COMPID3,CTI0 Component ID3" hexmask.long.byte 0x00 0.--7. 1. " ID3 ,Component ID3 Field" tree.end tree "CTI1" base ad:0x31102000 width 23. group.long 0x0++0x3 line.long 0x00 "CTI1_CTICONTROL,CTI1 CTI Control Register" bitfld.long 0x00 0. " GLBEN ,Global CTI Enable" "0,1" group.long 0x10++0x3 line.long 0x00 "CTI1_CTIINTACK,CTI1 CTI Interrupt Acknowledge Register" hexmask.long.byte 0x00 0.--7. 1. " INTACK ,Interrupt Acknowledge" group.long 0x14++0x3 line.long 0x00 "CTI1_CTIAPPSET,CTI1 CTI Application Trigger Set Register" bitfld.long 0x00 0.--3. " APPSET ,Set Channel Event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x3 line.long 0x00 "CTI1_CTIAPPCLEAR,CTI1 CTI Application Trigger Clear Register" bitfld.long 0x00 0.--3. " APPCLEAR ,Channel Clear" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C++0x3 line.long 0x00 "CTI1_CTIAPPPULSE,CTI1 CTI Application Pulse Register" bitfld.long 0x00 0.--3. " Bit_0APPULSE ,Channel Event Pulse" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20++0x3 line.long 0x00 "CTI1_CTIINEN0,CTI1 CTI Trigger 0 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24++0x3 line.long 0x00 "CTI1_CTIINEN1,CTI1 CTI Trigger 1 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x28++0x3 line.long 0x00 "CTI1_CTIINEN2,CTI1 CTI Trigger 2 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2C++0x3 line.long 0x00 "CTI1_CTIINEN3,CTI1 CTI Trigger 3 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x30++0x3 line.long 0x00 "CTI1_CTIINEN4,CTI1 CTI Trigger 4 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x34++0x3 line.long 0x00 "CTI1_CTIINEN5,CTI1 CTI Trigger 5 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x38++0x3 line.long 0x00 "CTI1_CTIINEN6,CTI1 CTI Trigger 6 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3C++0x3 line.long 0x00 "CTI1_CTIINEN7,CTI1 CTI Trigger 7 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA0++0x3 line.long 0x00 "CTI1_CTIOUTEN0,CTI1 CTI Channel to Trigger 0 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA4++0x3 line.long 0x00 "CTI1_CTIOUTEN1,CTI1 CTI Channel to Trigger 1 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA8++0x3 line.long 0x00 "CTI1_CTIOUTEN2,CTI1 CTI Channel to Trigger 2 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xAC++0x3 line.long 0x00 "CTI1_CTIOUTEN3,CTI1 CTI Channel to Trigger 3 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB0++0x3 line.long 0x00 "CTI1_CTIOUTEN4,CTI1 CTI Channel to Trigger 4 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB4++0x3 line.long 0x00 "CTI1_CTIOUTEN5,CTI1 CTI Channel to Trigger 5 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB8++0x3 line.long 0x00 "CTI1_CTIOUTEN6,CTI1 CTI Channel to Trigger 6 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xBC++0x3 line.long 0x00 "CTI1_CTIOUTEN7,CTI1 CTI Channel to Trigger 7 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x130++0x3 line.long 0x00 "CTI1_CTITRIGINSTATUS,CTI1 CTI Trigger In Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGINSTATUS ,Trigger In Status" group.long 0x134++0x3 line.long 0x00 "CTI1_CTITRIGOUTSTATUS,CTI1 CTI Trigger Out Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGOUTSTATUS ,Trigger Output Status" group.long 0x138++0x3 line.long 0x00 "CTI1_CTICHINSTATUS,CTI1 CTI Channel In Status Register" bitfld.long 0x00 0.--3. " CTCHINSTATUS ,Channel Input Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13C++0x3 line.long 0x00 "CTI1_CTICHOUTSTATUS,CTI1 CTI Channel Out Status Register" bitfld.long 0x00 0.--3. " CTCHOUTSTATUS ,Channel Out Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x3 line.long 0x00 "CTI1_CTIGATE,CTI1 Enable CTI Channel Gate Register" bitfld.long 0x00 3. " CTIGATEEN3 ,Enable CTICHOUT3" "0,1" bitfld.long 0x00 2. " CTIGATEEN2 ,Enable CTICHOUT2" "0,1" bitfld.long 0x00 1. " CTIGATEEN1 ,Enable CTICHOUT1" "0,1" bitfld.long 0x00 0. " CTIGATEEN0 ,Enable CTICHOUT0" "0,1" group.long 0x144++0x3 line.long 0x00 "CTI1_ASICCTL,CTI1 External Multiplexor Control Register" hexmask.long.byte 0x00 0.--7. 1. " ASICCTL ,ASIC Control" group.long 0xEDC++0x3 line.long 0x00 "CTI1_ITCHINACK,CTI1 ITCHINACK" bitfld.long 0x00 0.--3. " CTCHINACK ,Set the value of the CTCHINACK outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE0++0x3 line.long 0x00 "CTI1_ITTRIGINACK,CTI1 ITTRIGINACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGINACK ,Set the value of the CTTRIGINACK outputs" group.long 0xEE4++0x3 line.long 0x00 "CTI1_ITCHOUT,CTI1 ITCHOUT" bitfld.long 0x00 0.--3. " CTCHOUT ,Set the value of the CTCHOUT outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE8++0x3 line.long 0x00 "CTI1_ITTRIGOUT,CTI1 ITTRIGOUT" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUT ,Set the value of the CTTRIGOUT outputs" group.long 0xEEC++0x3 line.long 0x00 "CTI1_ITCHOUTACK,CTI1 ITCHOUTACK" bitfld.long 0x00 0.--3. " CTCHOUTACK ,Read the values of the CTCHOUTACK inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF0++0x3 line.long 0x00 "CTI1_ITTRIGOUTACK,CTI1 ITTRIGOUTACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUTACK ,Read the values of the CTTRIGOUTACK inputs" group.long 0xEF4++0x3 line.long 0x00 "CTI1_ITCHIN,CTI1 ITCHIN" bitfld.long 0x00 0.--3. " CTCHIN ,Read the values of the CTCHIN inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF8++0x3 line.long 0x00 "CTI1_ITTRIGIN,CTI1 ITTRIGIN" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGIN ,Read the values of the CTTRIGIN inputs" group.long 0xF00++0x3 line.long 0x00 "CTI1_ITCTRL,CTI1 Integration Mode Control Register" bitfld.long 0x00 0. " INTEGRATION_MODE ,Integration Mode Enable" "0,1" group.long 0xFA0++0x3 line.long 0x00 "CTI1_CLAIMSET,CTI1 Claim Tag Set Register" bitfld.long 0x00 0.--3. " CLAIMSET ,Claim Tag Set Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFA4++0x3 line.long 0x00 "CTI1_CLAIMCLR,CTI1 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " CLAIMCLR ,Claim Tag Clear Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFB0++0x3 line.long 0x00 "CTI1_LAR,CTI1 Lock Access Register" group.long 0xFB4++0x3 line.long 0x00 "CTI1_LSR,CTI1 Lock Status Register" bitfld.long 0x00 1. " ACCESS ,Access Blocked to Device" "0,1" bitfld.long 0x00 0. " LOCK ,Lock Exists for Device" "0,1" group.long 0xFB8++0x3 line.long 0x00 "CTI1_AUTHSTATUS,CTI1 Authentication Status" bitfld.long 0x00 3. " NDBG_EN ,Non-invasive Debug Enabled Status" "0,1" bitfld.long 0x00 2. " NDBG_CTL ,Non-invasive Debug Controlled" "0,1" bitfld.long 0x00 1. " IDBG_EN ,Invasive Debug Enable Status" "0,1" bitfld.long 0x00 0. " IDBG_CTL ,Invasive Debug Controlled" "0,1" group.long 0xFC8++0x3 line.long 0x00 "CTI1_DEVID,CTI1 Device ID" hexmask.long.tbyte 0x00 0.--19. 1. " DEVID ,Device ID Field" group.long 0xFCC++0x3 line.long 0x00 "CTI1_DEVTYPE,CTI1 Device Type" hexmask.long.byte 0x00 0.--7. 1. " DEVTYPE ,Device Type Field" group.long 0xFD0++0x3 line.long 0x00 "CTI1_PERIPHID4,CTI1 Peripheral ID4" hexmask.long.byte 0x00 0.--7. 1. " PID4 ,Peripheral ID4 Field" group.long 0xFD4++0x3 line.long 0x00 "CTI1_PERIPHID5,CTI1 Peripheral ID5" hexmask.long.byte 0x00 0.--7. 1. " PID5 ,Peripheral ID5 Field" group.long 0xFD8++0x3 line.long 0x00 "CTI1_PERIPHID6,CTI1 Peripheral ID6" hexmask.long.byte 0x00 0.--7. 1. " PID6 ,Peripheral ID6 Field" group.long 0xFDC++0x3 line.long 0x00 "CTI1_PERIPHID7,CTI1 Peripheral ID7" hexmask.long.byte 0x00 0.--7. 1. " PID7 ,Peripheral ID7 Field" group.long 0xFE0++0x3 line.long 0x00 "CTI1_PERIPHID0,CTI1 Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " PID0 ,Peripheral ID0 Field" group.long 0xFE4++0x3 line.long 0x00 "CTI1_PERIPHID1,CTI1 Peripheral ID1" hexmask.long.byte 0x00 0.--7. 1. " PID1 ,Peripheral ID1 Field" group.long 0xFE8++0x3 line.long 0x00 "CTI1_PERIPHID2,CTI1 Peripheral ID2" hexmask.long.byte 0x00 0.--7. 1. " PID2 ,Peripheral ID2 Field" group.long 0xFEC++0x3 line.long 0x00 "CTI1_PERIPHID3,CTI1 Peripheral ID3" hexmask.long.byte 0x00 0.--7. 1. " PID3 ,Peripheral ID3 Field" group.long 0xFF0++0x3 line.long 0x00 "CTI1_COMPID0,CTI1 Component ID0" hexmask.long.byte 0x00 0.--7. 1. " ID0 ,Component ID0 Field" group.long 0xFF4++0x3 line.long 0x00 "CTI1_COMPID1,CTI1 Component ID1" hexmask.long.byte 0x00 0.--7. 1. " ID1 ,Component ID1 Field" group.long 0xFF8++0x3 line.long 0x00 "CTI1_COMPID2,CTI1 Component ID2" hexmask.long.byte 0x00 0.--7. 1. " ID2 ,Component ID2 Field" group.long 0xFFC++0x3 line.long 0x00 "CTI1_COMPID3,CTI1 Component ID3" hexmask.long.byte 0x00 0.--7. 1. " ID3 ,Component ID3 Field" tree.end tree "CTI2" base ad:0x31106000 width 23. group.long 0x0++0x3 line.long 0x00 "CTI2_CTICONTROL,CTI2 CTI Control Register" bitfld.long 0x00 0. " GLBEN ,Global CTI Enable" "0,1" group.long 0x10++0x3 line.long 0x00 "CTI2_CTIINTACK,CTI2 CTI Interrupt Acknowledge Register" hexmask.long.byte 0x00 0.--7. 1. " INTACK ,Interrupt Acknowledge" group.long 0x14++0x3 line.long 0x00 "CTI2_CTIAPPSET,CTI2 CTI Application Trigger Set Register" bitfld.long 0x00 0.--3. " APPSET ,Set Channel Event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x3 line.long 0x00 "CTI2_CTIAPPCLEAR,CTI2 CTI Application Trigger Clear Register" bitfld.long 0x00 0.--3. " APPCLEAR ,Channel Clear" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C++0x3 line.long 0x00 "CTI2_CTIAPPPULSE,CTI2 CTI Application Pulse Register" bitfld.long 0x00 0.--3. " Bit_0APPULSE ,Channel Event Pulse" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20++0x3 line.long 0x00 "CTI2_CTIINEN0,CTI2 CTI Trigger 0 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24++0x3 line.long 0x00 "CTI2_CTIINEN1,CTI2 CTI Trigger 1 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x28++0x3 line.long 0x00 "CTI2_CTIINEN2,CTI2 CTI Trigger 2 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2C++0x3 line.long 0x00 "CTI2_CTIINEN3,CTI2 CTI Trigger 3 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x30++0x3 line.long 0x00 "CTI2_CTIINEN4,CTI2 CTI Trigger 4 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x34++0x3 line.long 0x00 "CTI2_CTIINEN5,CTI2 CTI Trigger 5 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x38++0x3 line.long 0x00 "CTI2_CTIINEN6,CTI2 CTI Trigger 6 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3C++0x3 line.long 0x00 "CTI2_CTIINEN7,CTI2 CTI Trigger 7 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA0++0x3 line.long 0x00 "CTI2_CTIOUTEN0,CTI2 CTI Channel to Trigger 0 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA4++0x3 line.long 0x00 "CTI2_CTIOUTEN1,CTI2 CTI Channel to Trigger 1 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA8++0x3 line.long 0x00 "CTI2_CTIOUTEN2,CTI2 CTI Channel to Trigger 2 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xAC++0x3 line.long 0x00 "CTI2_CTIOUTEN3,CTI2 CTI Channel to Trigger 3 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB0++0x3 line.long 0x00 "CTI2_CTIOUTEN4,CTI2 CTI Channel to Trigger 4 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB4++0x3 line.long 0x00 "CTI2_CTIOUTEN5,CTI2 CTI Channel to Trigger 5 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB8++0x3 line.long 0x00 "CTI2_CTIOUTEN6,CTI2 CTI Channel to Trigger 6 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xBC++0x3 line.long 0x00 "CTI2_CTIOUTEN7,CTI2 CTI Channel to Trigger 7 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x130++0x3 line.long 0x00 "CTI2_CTITRIGINSTATUS,CTI2 CTI Trigger In Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGINSTATUS ,Trigger In Status" group.long 0x134++0x3 line.long 0x00 "CTI2_CTITRIGOUTSTATUS,CTI2 CTI Trigger Out Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGOUTSTATUS ,Trigger Output Status" group.long 0x138++0x3 line.long 0x00 "CTI2_CTICHINSTATUS,CTI2 CTI Channel In Status Register" bitfld.long 0x00 0.--3. " CTCHINSTATUS ,Channel Input Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13C++0x3 line.long 0x00 "CTI2_CTICHOUTSTATUS,CTI2 CTI Channel Out Status Register" bitfld.long 0x00 0.--3. " CTCHOUTSTATUS ,Channel Out Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x3 line.long 0x00 "CTI2_CTIGATE,CTI2 Enable CTI Channel Gate Register" bitfld.long 0x00 3. " CTIGATEEN3 ,Enable CTICHOUT3" "0,1" bitfld.long 0x00 2. " CTIGATEEN2 ,Enable CTICHOUT2" "0,1" bitfld.long 0x00 1. " CTIGATEEN1 ,Enable CTICHOUT1" "0,1" bitfld.long 0x00 0. " CTIGATEEN0 ,Enable CTICHOUT0" "0,1" group.long 0x144++0x3 line.long 0x00 "CTI2_ASICCTL,CTI2 External Multiplexor Control Register" hexmask.long.byte 0x00 0.--7. 1. " ASICCTL ,ASIC Control" group.long 0xEDC++0x3 line.long 0x00 "CTI2_ITCHINACK,CTI2 ITCHINACK" bitfld.long 0x00 0.--3. " CTCHINACK ,Set the value of the CTCHINACK outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE0++0x3 line.long 0x00 "CTI2_ITTRIGINACK,CTI2 ITTRIGINACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGINACK ,Set the value of the CTTRIGINACK outputs" group.long 0xEE4++0x3 line.long 0x00 "CTI2_ITCHOUT,CTI2 ITCHOUT" bitfld.long 0x00 0.--3. " CTCHOUT ,Set the value of the CTCHOUT outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE8++0x3 line.long 0x00 "CTI2_ITTRIGOUT,CTI2 ITTRIGOUT" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUT ,Set the value of the CTTRIGOUT outputs" group.long 0xEEC++0x3 line.long 0x00 "CTI2_ITCHOUTACK,CTI2 ITCHOUTACK" bitfld.long 0x00 0.--3. " CTCHOUTACK ,Read the values of the CTCHOUTACK inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF0++0x3 line.long 0x00 "CTI2_ITTRIGOUTACK,CTI2 ITTRIGOUTACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUTACK ,Read the values of the CTTRIGOUTACK inputs" group.long 0xEF4++0x3 line.long 0x00 "CTI2_ITCHIN,CTI2 ITCHIN" bitfld.long 0x00 0.--3. " CTCHIN ,Read the values of the CTCHIN inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF8++0x3 line.long 0x00 "CTI2_ITTRIGIN,CTI2 ITTRIGIN" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGIN ,Read the values of the CTTRIGIN inputs" group.long 0xF00++0x3 line.long 0x00 "CTI2_ITCTRL,CTI2 Integration Mode Control Register" bitfld.long 0x00 0. " INTEGRATION_MODE ,Integration Mode Enable" "0,1" group.long 0xFA0++0x3 line.long 0x00 "CTI2_CLAIMSET,CTI2 Claim Tag Set Register" bitfld.long 0x00 0.--3. " CLAIMSET ,Claim Tag Set Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFA4++0x3 line.long 0x00 "CTI2_CLAIMCLR,CTI2 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " CLAIMCLR ,Claim Tag Clear Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFB0++0x3 line.long 0x00 "CTI2_LAR,CTI2 Lock Access Register" group.long 0xFB4++0x3 line.long 0x00 "CTI2_LSR,CTI2 Lock Status Register" bitfld.long 0x00 1. " ACCESS ,Access Blocked to Device" "0,1" bitfld.long 0x00 0. " LOCK ,Lock Exists for Device" "0,1" group.long 0xFB8++0x3 line.long 0x00 "CTI2_AUTHSTATUS,CTI2 Authentication Status" bitfld.long 0x00 3. " NDBG_EN ,Non-invasive Debug Enabled Status" "0,1" bitfld.long 0x00 2. " NDBG_CTL ,Non-invasive Debug Controlled" "0,1" bitfld.long 0x00 1. " IDBG_EN ,Invasive Debug Enable Status" "0,1" bitfld.long 0x00 0. " IDBG_CTL ,Invasive Debug Controlled" "0,1" group.long 0xFC8++0x3 line.long 0x00 "CTI2_DEVID,CTI2 Device ID" hexmask.long.tbyte 0x00 0.--19. 1. " DEVID ,Device ID Field" group.long 0xFCC++0x3 line.long 0x00 "CTI2_DEVTYPE,CTI2 Device Type" hexmask.long.byte 0x00 0.--7. 1. " DEVTYPE ,Device Type Field" group.long 0xFD0++0x3 line.long 0x00 "CTI2_PERIPHID4,CTI2 Peripheral ID4" hexmask.long.byte 0x00 0.--7. 1. " PID4 ,Peripheral ID4 Field" group.long 0xFD4++0x3 line.long 0x00 "CTI2_PERIPHID5,CTI2 Peripheral ID5" hexmask.long.byte 0x00 0.--7. 1. " PID5 ,Peripheral ID5 Field" group.long 0xFD8++0x3 line.long 0x00 "CTI2_PERIPHID6,CTI2 Peripheral ID6" hexmask.long.byte 0x00 0.--7. 1. " PID6 ,Peripheral ID6 Field" group.long 0xFDC++0x3 line.long 0x00 "CTI2_PERIPHID7,CTI2 Peripheral ID7" hexmask.long.byte 0x00 0.--7. 1. " PID7 ,Peripheral ID7 Field" group.long 0xFE0++0x3 line.long 0x00 "CTI2_PERIPHID0,CTI2 Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " PID0 ,Peripheral ID0 Field" group.long 0xFE4++0x3 line.long 0x00 "CTI2_PERIPHID1,CTI2 Peripheral ID1" hexmask.long.byte 0x00 0.--7. 1. " PID1 ,Peripheral ID1 Field" group.long 0xFE8++0x3 line.long 0x00 "CTI2_PERIPHID2,CTI2 Peripheral ID2" hexmask.long.byte 0x00 0.--7. 1. " PID2 ,Peripheral ID2 Field" group.long 0xFEC++0x3 line.long 0x00 "CTI2_PERIPHID3,CTI2 Peripheral ID3" hexmask.long.byte 0x00 0.--7. 1. " PID3 ,Peripheral ID3 Field" group.long 0xFF0++0x3 line.long 0x00 "CTI2_COMPID0,CTI2 Component ID0" hexmask.long.byte 0x00 0.--7. 1. " ID0 ,Component ID0 Field" group.long 0xFF4++0x3 line.long 0x00 "CTI2_COMPID1,CTI2 Component ID1" hexmask.long.byte 0x00 0.--7. 1. " ID1 ,Component ID1 Field" group.long 0xFF8++0x3 line.long 0x00 "CTI2_COMPID2,CTI2 Component ID2" hexmask.long.byte 0x00 0.--7. 1. " ID2 ,Component ID2 Field" group.long 0xFFC++0x3 line.long 0x00 "CTI2_COMPID3,CTI2 Component ID3" hexmask.long.byte 0x00 0.--7. 1. " ID3 ,Component ID3 Field" tree.end tree "CTI3" base ad:0x3110D000 width 23. group.long 0x0++0x3 line.long 0x00 "CTI3_CTICONTROL,CTI3 CTI Control Register" bitfld.long 0x00 0. " GLBEN ,Global CTI Enable" "0,1" group.long 0x10++0x3 line.long 0x00 "CTI3_CTIINTACK,CTI3 CTI Interrupt Acknowledge Register" hexmask.long.byte 0x00 0.--7. 1. " INTACK ,Interrupt Acknowledge" group.long 0x14++0x3 line.long 0x00 "CTI3_CTIAPPSET,CTI3 CTI Application Trigger Set Register" bitfld.long 0x00 0.--3. " APPSET ,Set Channel Event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x3 line.long 0x00 "CTI3_CTIAPPCLEAR,CTI3 CTI Application Trigger Clear Register" bitfld.long 0x00 0.--3. " APPCLEAR ,Channel Clear" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C++0x3 line.long 0x00 "CTI3_CTIAPPPULSE,CTI3 CTI Application Pulse Register" bitfld.long 0x00 0.--3. " Bit_0APPULSE ,Channel Event Pulse" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20++0x3 line.long 0x00 "CTI3_CTIINEN0,CTI3 CTI Trigger 0 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24++0x3 line.long 0x00 "CTI3_CTIINEN1,CTI3 CTI Trigger 1 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x28++0x3 line.long 0x00 "CTI3_CTIINEN2,CTI3 CTI Trigger 2 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2C++0x3 line.long 0x00 "CTI3_CTIINEN3,CTI3 CTI Trigger 3 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x30++0x3 line.long 0x00 "CTI3_CTIINEN4,CTI3 CTI Trigger 4 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x34++0x3 line.long 0x00 "CTI3_CTIINEN5,CTI3 CTI Trigger 5 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x38++0x3 line.long 0x00 "CTI3_CTIINEN6,CTI3 CTI Trigger 6 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3C++0x3 line.long 0x00 "CTI3_CTIINEN7,CTI3 CTI Trigger 7 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA0++0x3 line.long 0x00 "CTI3_CTIOUTEN0,CTI3 CTI Channel to Trigger 0 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA4++0x3 line.long 0x00 "CTI3_CTIOUTEN1,CTI3 CTI Channel to Trigger 1 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA8++0x3 line.long 0x00 "CTI3_CTIOUTEN2,CTI3 CTI Channel to Trigger 2 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xAC++0x3 line.long 0x00 "CTI3_CTIOUTEN3,CTI3 CTI Channel to Trigger 3 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB0++0x3 line.long 0x00 "CTI3_CTIOUTEN4,CTI3 CTI Channel to Trigger 4 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB4++0x3 line.long 0x00 "CTI3_CTIOUTEN5,CTI3 CTI Channel to Trigger 5 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB8++0x3 line.long 0x00 "CTI3_CTIOUTEN6,CTI3 CTI Channel to Trigger 6 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xBC++0x3 line.long 0x00 "CTI3_CTIOUTEN7,CTI3 CTI Channel to Trigger 7 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x130++0x3 line.long 0x00 "CTI3_CTITRIGINSTATUS,CTI3 CTI Trigger In Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGINSTATUS ,Trigger In Status" group.long 0x134++0x3 line.long 0x00 "CTI3_CTITRIGOUTSTATUS,CTI3 CTI Trigger Out Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGOUTSTATUS ,Trigger Output Status" group.long 0x138++0x3 line.long 0x00 "CTI3_CTICHINSTATUS,CTI3 CTI Channel In Status Register" bitfld.long 0x00 0.--3. " CTCHINSTATUS ,Channel Input Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13C++0x3 line.long 0x00 "CTI3_CTICHOUTSTATUS,CTI3 CTI Channel Out Status Register" bitfld.long 0x00 0.--3. " CTCHOUTSTATUS ,Channel Out Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x3 line.long 0x00 "CTI3_CTIGATE,CTI3 Enable CTI Channel Gate Register" bitfld.long 0x00 3. " CTIGATEEN3 ,Enable CTICHOUT3" "0,1" bitfld.long 0x00 2. " CTIGATEEN2 ,Enable CTICHOUT2" "0,1" bitfld.long 0x00 1. " CTIGATEEN1 ,Enable CTICHOUT1" "0,1" bitfld.long 0x00 0. " CTIGATEEN0 ,Enable CTICHOUT0" "0,1" group.long 0x144++0x3 line.long 0x00 "CTI3_ASICCTL,CTI3 External Multiplexor Control Register" hexmask.long.byte 0x00 0.--7. 1. " ASICCTL ,ASIC Control" group.long 0xEDC++0x3 line.long 0x00 "CTI3_ITCHINACK,CTI3 ITCHINACK" bitfld.long 0x00 0.--3. " CTCHINACK ,Set the value of the CTCHINACK outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE0++0x3 line.long 0x00 "CTI3_ITTRIGINACK,CTI3 ITTRIGINACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGINACK ,Set the value of the CTTRIGINACK outputs" group.long 0xEE4++0x3 line.long 0x00 "CTI3_ITCHOUT,CTI3 ITCHOUT" bitfld.long 0x00 0.--3. " CTCHOUT ,Set the value of the CTCHOUT outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE8++0x3 line.long 0x00 "CTI3_ITTRIGOUT,CTI3 ITTRIGOUT" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUT ,Set the value of the CTTRIGOUT outputs" group.long 0xEEC++0x3 line.long 0x00 "CTI3_ITCHOUTACK,CTI3 ITCHOUTACK" bitfld.long 0x00 0.--3. " CTCHOUTACK ,Read the values of the CTCHOUTACK inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF0++0x3 line.long 0x00 "CTI3_ITTRIGOUTACK,CTI3 ITTRIGOUTACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUTACK ,Read the values of the CTTRIGOUTACK inputs" group.long 0xEF4++0x3 line.long 0x00 "CTI3_ITCHIN,CTI3 ITCHIN" bitfld.long 0x00 0.--3. " CTCHIN ,Read the values of the CTCHIN inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF8++0x3 line.long 0x00 "CTI3_ITTRIGIN,CTI3 ITTRIGIN" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGIN ,Read the values of the CTTRIGIN inputs" group.long 0xF00++0x3 line.long 0x00 "CTI3_ITCTRL,CTI3 Integration Mode Control Register" bitfld.long 0x00 0. " INTEGRATION_MODE ,Integration Mode Enable" "0,1" group.long 0xFA0++0x3 line.long 0x00 "CTI3_CLAIMSET,CTI3 Claim Tag Set Register" bitfld.long 0x00 0.--3. " CLAIMSET ,Claim Tag Set Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFA4++0x3 line.long 0x00 "CTI3_CLAIMCLR,CTI3 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " CLAIMCLR ,Claim Tag Clear Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFB0++0x3 line.long 0x00 "CTI3_LAR,CTI3 Lock Access Register" group.long 0xFB4++0x3 line.long 0x00 "CTI3_LSR,CTI3 Lock Status Register" bitfld.long 0x00 1. " ACCESS ,Access Blocked to Device" "0,1" bitfld.long 0x00 0. " LOCK ,Lock Exists for Device" "0,1" group.long 0xFB8++0x3 line.long 0x00 "CTI3_AUTHSTATUS,CTI3 Authentication Status" bitfld.long 0x00 3. " NDBG_EN ,Non-invasive Debug Enabled Status" "0,1" bitfld.long 0x00 2. " NDBG_CTL ,Non-invasive Debug Controlled" "0,1" bitfld.long 0x00 1. " IDBG_EN ,Invasive Debug Enable Status" "0,1" bitfld.long 0x00 0. " IDBG_CTL ,Invasive Debug Controlled" "0,1" group.long 0xFC8++0x3 line.long 0x00 "CTI3_DEVID,CTI3 Device ID" hexmask.long.tbyte 0x00 0.--19. 1. " DEVID ,Device ID Field" group.long 0xFCC++0x3 line.long 0x00 "CTI3_DEVTYPE,CTI3 Device Type" hexmask.long.byte 0x00 0.--7. 1. " DEVTYPE ,Device Type Field" group.long 0xFD0++0x3 line.long 0x00 "CTI3_PERIPHID4,CTI3 Peripheral ID4" hexmask.long.byte 0x00 0.--7. 1. " PID4 ,Peripheral ID4 Field" group.long 0xFD4++0x3 line.long 0x00 "CTI3_PERIPHID5,CTI3 Peripheral ID5" hexmask.long.byte 0x00 0.--7. 1. " PID5 ,Peripheral ID5 Field" group.long 0xFD8++0x3 line.long 0x00 "CTI3_PERIPHID6,CTI3 Peripheral ID6" hexmask.long.byte 0x00 0.--7. 1. " PID6 ,Peripheral ID6 Field" group.long 0xFDC++0x3 line.long 0x00 "CTI3_PERIPHID7,CTI3 Peripheral ID7" hexmask.long.byte 0x00 0.--7. 1. " PID7 ,Peripheral ID7 Field" group.long 0xFE0++0x3 line.long 0x00 "CTI3_PERIPHID0,CTI3 Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " PID0 ,Peripheral ID0 Field" group.long 0xFE4++0x3 line.long 0x00 "CTI3_PERIPHID1,CTI3 Peripheral ID1" hexmask.long.byte 0x00 0.--7. 1. " PID1 ,Peripheral ID1 Field" group.long 0xFE8++0x3 line.long 0x00 "CTI3_PERIPHID2,CTI3 Peripheral ID2" hexmask.long.byte 0x00 0.--7. 1. " PID2 ,Peripheral ID2 Field" group.long 0xFEC++0x3 line.long 0x00 "CTI3_PERIPHID3,CTI3 Peripheral ID3" hexmask.long.byte 0x00 0.--7. 1. " PID3 ,Peripheral ID3 Field" group.long 0xFF0++0x3 line.long 0x00 "CTI3_COMPID0,CTI3 Component ID0" hexmask.long.byte 0x00 0.--7. 1. " ID0 ,Component ID0 Field" group.long 0xFF4++0x3 line.long 0x00 "CTI3_COMPID1,CTI3 Component ID1" hexmask.long.byte 0x00 0.--7. 1. " ID1 ,Component ID1 Field" group.long 0xFF8++0x3 line.long 0x00 "CTI3_COMPID2,CTI3 Component ID2" hexmask.long.byte 0x00 0.--7. 1. " ID2 ,Component ID2 Field" group.long 0xFFC++0x3 line.long 0x00 "CTI3_COMPID3,CTI3 Component ID3" hexmask.long.byte 0x00 0.--7. 1. " ID3 ,Component ID3 Field" tree.end tree "CTI4" base ad:0x3110C000 width 23. group.long 0x0++0x3 line.long 0x00 "CTI4_CTICONTROL,CTI4 CTI Control Register" bitfld.long 0x00 0. " GLBEN ,Global CTI Enable" "0,1" group.long 0x10++0x3 line.long 0x00 "CTI4_CTIINTACK,CTI4 CTI Interrupt Acknowledge Register" hexmask.long.byte 0x00 0.--7. 1. " INTACK ,Interrupt Acknowledge" group.long 0x14++0x3 line.long 0x00 "CTI4_CTIAPPSET,CTI4 CTI Application Trigger Set Register" bitfld.long 0x00 0.--3. " APPSET ,Set Channel Event" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18++0x3 line.long 0x00 "CTI4_CTIAPPCLEAR,CTI4 CTI Application Trigger Clear Register" bitfld.long 0x00 0.--3. " APPCLEAR ,Channel Clear" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C++0x3 line.long 0x00 "CTI4_CTIAPPPULSE,CTI4 CTI Application Pulse Register" bitfld.long 0x00 0.--3. " Bit_0APPULSE ,Channel Event Pulse" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20++0x3 line.long 0x00 "CTI4_CTIINEN0,CTI4 CTI Trigger 0 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24++0x3 line.long 0x00 "CTI4_CTIINEN1,CTI4 CTI Trigger 1 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x28++0x3 line.long 0x00 "CTI4_CTIINEN2,CTI4 CTI Trigger 2 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2C++0x3 line.long 0x00 "CTI4_CTIINEN3,CTI4 CTI Trigger 3 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x30++0x3 line.long 0x00 "CTI4_CTIINEN4,CTI4 CTI Trigger 4 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x34++0x3 line.long 0x00 "CTI4_CTIINEN5,CTI4 CTI Trigger 5 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x38++0x3 line.long 0x00 "CTI4_CTIINEN6,CTI4 CTI Trigger 6 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3C++0x3 line.long 0x00 "CTI4_CTIINEN7,CTI4 CTI Trigger 7 to Channel Enable Register" bitfld.long 0x00 0.--3. " TRIGINEN ,Channel Trigger Input Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA0++0x3 line.long 0x00 "CTI4_CTIOUTEN0,CTI4 CTI Channel to Trigger 0 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA4++0x3 line.long 0x00 "CTI4_CTIOUTEN1,CTI4 CTI Channel to Trigger 1 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA8++0x3 line.long 0x00 "CTI4_CTIOUTEN2,CTI4 CTI Channel to Trigger 2 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xAC++0x3 line.long 0x00 "CTI4_CTIOUTEN3,CTI4 CTI Channel to Trigger 3 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB0++0x3 line.long 0x00 "CTI4_CTIOUTEN4,CTI4 CTI Channel to Trigger 4 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB4++0x3 line.long 0x00 "CTI4_CTIOUTEN5,CTI4 CTI Channel to Trigger 5 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB8++0x3 line.long 0x00 "CTI4_CTIOUTEN6,CTI4 CTI Channel to Trigger 6 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xBC++0x3 line.long 0x00 "CTI4_CTIOUTEN7,CTI4 CTI Channel to Trigger 7 Enable Register" bitfld.long 0x00 0.--3. " TRIGOUTEN ,Channel Trigger Output Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x130++0x3 line.long 0x00 "CTI4_CTITRIGINSTATUS,CTI4 CTI Trigger In Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGINSTATUS ,Trigger In Status" group.long 0x134++0x3 line.long 0x00 "CTI4_CTITRIGOUTSTATUS,CTI4 CTI Trigger Out Status Register" hexmask.long.byte 0x00 0.--7. 1. " TRIGOUTSTATUS ,Trigger Output Status" group.long 0x138++0x3 line.long 0x00 "CTI4_CTICHINSTATUS,CTI4 CTI Channel In Status Register" bitfld.long 0x00 0.--3. " CTCHINSTATUS ,Channel Input Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13C++0x3 line.long 0x00 "CTI4_CTICHOUTSTATUS,CTI4 CTI Channel Out Status Register" bitfld.long 0x00 0.--3. " CTCHOUTSTATUS ,Channel Out Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x3 line.long 0x00 "CTI4_CTIGATE,CTI4 Enable CTI Channel Gate Register" bitfld.long 0x00 3. " CTIGATEEN3 ,Enable CTICHOUT3" "0,1" bitfld.long 0x00 2. " CTIGATEEN2 ,Enable CTICHOUT2" "0,1" bitfld.long 0x00 1. " CTIGATEEN1 ,Enable CTICHOUT1" "0,1" bitfld.long 0x00 0. " CTIGATEEN0 ,Enable CTICHOUT0" "0,1" group.long 0x144++0x3 line.long 0x00 "CTI4_ASICCTL,CTI4 External Multiplexor Control Register" hexmask.long.byte 0x00 0.--7. 1. " ASICCTL ,ASIC Control" group.long 0xEDC++0x3 line.long 0x00 "CTI4_ITCHINACK,CTI4 ITCHINACK" bitfld.long 0x00 0.--3. " CTCHINACK ,Set the value of the CTCHINACK outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE0++0x3 line.long 0x00 "CTI4_ITTRIGINACK,CTI4 ITTRIGINACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGINACK ,Set the value of the CTTRIGINACK outputs" group.long 0xEE4++0x3 line.long 0x00 "CTI4_ITCHOUT,CTI4 ITCHOUT" bitfld.long 0x00 0.--3. " CTCHOUT ,Set the value of the CTCHOUT outputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEE8++0x3 line.long 0x00 "CTI4_ITTRIGOUT,CTI4 ITTRIGOUT" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUT ,Set the value of the CTTRIGOUT outputs" group.long 0xEEC++0x3 line.long 0x00 "CTI4_ITCHOUTACK,CTI4 ITCHOUTACK" bitfld.long 0x00 0.--3. " CTCHOUTACK ,Read the values of the CTCHOUTACK inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF0++0x3 line.long 0x00 "CTI4_ITTRIGOUTACK,CTI4 ITTRIGOUTACK" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGOUTACK ,Read the values of the CTTRIGOUTACK inputs" group.long 0xEF4++0x3 line.long 0x00 "CTI4_ITCHIN,CTI4 ITCHIN" bitfld.long 0x00 0.--3. " CTCHIN ,Read the values of the CTCHIN inputs" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xEF8++0x3 line.long 0x00 "CTI4_ITTRIGIN,CTI4 ITTRIGIN" hexmask.long.byte 0x00 0.--7. 1. " CTTRIGIN ,Read the values of the CTTRIGIN inputs" group.long 0xF00++0x3 line.long 0x00 "CTI4_ITCTRL,CTI4 Integration Mode Control Register" bitfld.long 0x00 0. " INTEGRATION_MODE ,Integration Mode Enable" "0,1" group.long 0xFA0++0x3 line.long 0x00 "CTI4_CLAIMSET,CTI4 Claim Tag Set Register" bitfld.long 0x00 0.--3. " CLAIMSET ,Claim Tag Set Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFA4++0x3 line.long 0x00 "CTI4_CLAIMCLR,CTI4 Claim Tag Clear Register" bitfld.long 0x00 0.--3. " CLAIMCLR ,Claim Tag Clear Register Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xFB0++0x3 line.long 0x00 "CTI4_LAR,CTI4 Lock Access Register" group.long 0xFB4++0x3 line.long 0x00 "CTI4_LSR,CTI4 Lock Status Register" bitfld.long 0x00 1. " ACCESS ,Access Blocked to Device" "0,1" bitfld.long 0x00 0. " LOCK ,Lock Exists for Device" "0,1" group.long 0xFB8++0x3 line.long 0x00 "CTI4_AUTHSTATUS,CTI4 Authentication Status" bitfld.long 0x00 3. " NDBG_EN ,Non-invasive Debug Enabled Status" "0,1" bitfld.long 0x00 2. " NDBG_CTL ,Non-invasive Debug Controlled" "0,1" bitfld.long 0x00 1. " IDBG_EN ,Invasive Debug Enable Status" "0,1" bitfld.long 0x00 0. " IDBG_CTL ,Invasive Debug Controlled" "0,1" group.long 0xFC8++0x3 line.long 0x00 "CTI4_DEVID,CTI4 Device ID" hexmask.long.tbyte 0x00 0.--19. 1. " DEVID ,Device ID Field" group.long 0xFCC++0x3 line.long 0x00 "CTI4_DEVTYPE,CTI4 Device Type" hexmask.long.byte 0x00 0.--7. 1. " DEVTYPE ,Device Type Field" group.long 0xFD0++0x3 line.long 0x00 "CTI4_PERIPHID4,CTI4 Peripheral ID4" hexmask.long.byte 0x00 0.--7. 1. " PID4 ,Peripheral ID4 Field" group.long 0xFD4++0x3 line.long 0x00 "CTI4_PERIPHID5,CTI4 Peripheral ID5" hexmask.long.byte 0x00 0.--7. 1. " PID5 ,Peripheral ID5 Field" group.long 0xFD8++0x3 line.long 0x00 "CTI4_PERIPHID6,CTI4 Peripheral ID6" hexmask.long.byte 0x00 0.--7. 1. " PID6 ,Peripheral ID6 Field" group.long 0xFDC++0x3 line.long 0x00 "CTI4_PERIPHID7,CTI4 Peripheral ID7" hexmask.long.byte 0x00 0.--7. 1. " PID7 ,Peripheral ID7 Field" group.long 0xFE0++0x3 line.long 0x00 "CTI4_PERIPHID0,CTI4 Peripheral ID0" hexmask.long.byte 0x00 0.--7. 1. " PID0 ,Peripheral ID0 Field" group.long 0xFE4++0x3 line.long 0x00 "CTI4_PERIPHID1,CTI4 Peripheral ID1" hexmask.long.byte 0x00 0.--7. 1. " PID1 ,Peripheral ID1 Field" group.long 0xFE8++0x3 line.long 0x00 "CTI4_PERIPHID2,CTI4 Peripheral ID2" hexmask.long.byte 0x00 0.--7. 1. " PID2 ,Peripheral ID2 Field" group.long 0xFEC++0x3 line.long 0x00 "CTI4_PERIPHID3,CTI4 Peripheral ID3" hexmask.long.byte 0x00 0.--7. 1. " PID3 ,Peripheral ID3 Field" group.long 0xFF0++0x3 line.long 0x00 "CTI4_COMPID0,CTI4 Component ID0" hexmask.long.byte 0x00 0.--7. 1. " ID0 ,Component ID0 Field" group.long 0xFF4++0x3 line.long 0x00 "CTI4_COMPID1,CTI4 Component ID1" hexmask.long.byte 0x00 0.--7. 1. " ID1 ,Component ID1 Field" group.long 0xFF8++0x3 line.long 0x00 "CTI4_COMPID2,CTI4 Component ID2" hexmask.long.byte 0x00 0.--7. 1. " ID2 ,Component ID2 Field" group.long 0xFFC++0x3 line.long 0x00 "CTI4_COMPID3,CTI4 Component ID3" hexmask.long.byte 0x00 0.--7. 1. " ID3 ,Component ID3 Field" tree.end tree.end tree "DAI (Digital Audio Interface)" tree "DAI0" base ad:0x310C90C0 width 15. group.long 0x0++0x3 line.long 0x00 "DAI0_CLK0,DAI0 Clock Routing Control Register 0" bitfld.long 0x00 25.--29. " IN5 ,Input Clock 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Clock 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Clock 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input Clock 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4++0x3 line.long 0x00 "DAI0_CLK1,DAI0 Clock Routing Control Register 1" bitfld.long 0x00 25.--29. " IN5 ,Input Clock 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Clock 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Clock 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input Clock 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x8++0x3 line.long 0x00 "DAI0_CLK2,DAI0 Clock Routing Control Register 2" bitfld.long 0x00 10.--14. " IN2 ,Input Clock 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0xC++0x3 line.long 0x00 "DAI0_CLK3,DAI0 Clock Routing Control Register 3" bitfld.long 0x00 25.--29. " IN5 ,Input Clock 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x10++0x3 line.long 0x00 "DAI0_CLK4,DAI0 Clock Routing Control Register 4" bitfld.long 0x00 25.--29. " IN5 ,Input Clock 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Clock 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Clock 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x14++0x3 line.long 0x00 "DAI0_CLK5,DAI0 Clock Routing Control Register 5" bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x40++0x3 line.long 0x00 "DAI0_DAT0,DAI0 Serial Data Routing Control Register 0" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x44++0x3 line.long 0x00 "DAI0_DAT1,DAI0 Serial Data Routing Control Register 1" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x48++0x3 line.long 0x00 "DAI0_DAT2,DAI0 Serial Data Routing Control Register 2" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x4C++0x3 line.long 0x00 "DAI0_DAT3,DAI0 Serial Data Routing Control Register 3" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x50++0x3 line.long 0x00 "DAI0_DAT4,DAI0 Serial Data Routing Control Register 4" bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x54++0x3 line.long 0x00 "DAI0_DAT5,DAI0 Serial Data Routing Control Register 5" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x58++0x3 line.long 0x00 "DAI0_DAT6,DAI0 Serial Data Routing Control Register 6" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x80++0x3 line.long 0x00 "DAI0_FS0,DAI0 Frame Sync Routing Control Register 0" bitfld.long 0x00 25.--29. " IN5 ,Input Frame Sync 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Frame Sync 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Frame Sync 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input Frame Sync 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input Frame Sync 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Frame Sync 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x84++0x3 line.long 0x00 "DAI0_FS1,DAI0 Frame Sync Routing Control Register 1" bitfld.long 0x00 25.--29. " IN5 ,Input Frame Sync 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Frame Sync 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Frame Sync 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input Frame Sync 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input Frame Sync 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Frame Sync 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x88++0x3 line.long 0x00 "DAI0_FS2,DAI0 Frame Sync Routing Control Register 2" bitfld.long 0x00 10.--14. " IN2 ,Input Frame Sync 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--9. " IN1 ,Input Frame Sync 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Frame Sync 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x90++0x3 line.long 0x00 "DAI0_FS4,DAI0 Frame Sync Routing Control Register 4" bitfld.long 0x00 5.--9. " IN1 ,Input Frame Sync 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Frame Sync 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0xC0++0x3 line.long 0x00 "DAI0_PIN0,DAI0 Pin Buffer Assignment Register 0" hexmask.long.byte 0x00 21.--27. 1. " PB04 ,Pin Buffer 4 Input" hexmask.long.byte 0x00 14.--20. 1. " PB03 ,Pin Buffer 3 Input" hexmask.long.byte 0x00 7.--13. 1. " PB02 ,Pin Buffer 2 Input" hexmask.long.byte 0x00 0.--6. 1. " PB01 ,Pin Buffer 1 Input" group.long 0xC4++0x3 line.long 0x00 "DAI0_PIN1,DAI0 Pin Buffer Assignment Register 1" hexmask.long.byte 0x00 21.--27. 1. " PB08 ,Pin Buffer 8 Input" hexmask.long.byte 0x00 14.--20. 1. " PB07 ,Pin Buffer 7 Input" hexmask.long.byte 0x00 7.--13. 1. " PB06 ,Pin Buffer 6 Input" hexmask.long.byte 0x00 0.--6. 1. " PB05 ,Pin Buffer 5 Input" group.long 0xC8++0x3 line.long 0x00 "DAI0_PIN2,DAI0 Pin Buffer Assignment Register 2" hexmask.long.byte 0x00 21.--27. 1. " PB12 ,Pin Buffer 12 Input" hexmask.long.byte 0x00 14.--20. 1. " PB11 ,Pin Buffer 11 Input" hexmask.long.byte 0x00 7.--13. 1. " PB10 ,Pin Buffer 10 Input" hexmask.long.byte 0x00 0.--6. 1. " PB09 ,Pin Buffer 9 Input" group.long 0xCC++0x3 line.long 0x00 "DAI0_PIN3,DAI0 Pin Buffer Assignment Register 3" hexmask.long.byte 0x00 21.--27. 1. " PB16 ,Pin Buffer 16 Input" hexmask.long.byte 0x00 14.--20. 1. " PB15 ,Pin Buffer 15 Input" hexmask.long.byte 0x00 7.--13. 1. " PB14 ,Pin Buffer 14 Input" hexmask.long.byte 0x00 0.--6. 1. " PB13 ,Pin Buffer 13 Input" group.long 0xD0++0x3 line.long 0x00 "DAI0_PIN4,DAI0 Pin Buffer Assignment Register 4" bitfld.long 0x00 29. " INV20 ,Pin Buffer 20 Invert" "0,1" bitfld.long 0x00 28. " INV19 ,Pin Buffer 19 Invert" "0,1" hexmask.long.byte 0x00 21.--27. 1. " PB20 ,Pin Buffer 20 Input" hexmask.long.byte 0x00 14.--20. 1. " PB19 ,Pin Buffer 19 Input" newline hexmask.long.byte 0x00 7.--13. 1. " PB18 ,Pin Buffer 18 Input" hexmask.long.byte 0x00 0.--6. 1. " PB17 ,Pin Buffer 17 Input" group.long 0x100++0x3 line.long 0x00 "DAI0_MISC0,DAI0 Miscellaneous Control Register 0" bitfld.long 0x00 31. " INV11 ,Invert 11" "0,1" bitfld.long 0x00 30. " INV10 ,Invert 10" "0,1" bitfld.long 0x00 25.--29. " IN11 ,Input 11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN10 ,Input 10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 15.--19. " IN9 ,Input 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN8 ,Input 8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--9. " IN7 ,Input 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN6 ,Input 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x104++0x3 line.long 0x00 "DAI0_MISC1,DAI0 Miscellaneous Control Register 1" bitfld.long 0x00 25.--29. " IN5 ,Input 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x120++0x3 line.long 0x00 "DAI0_PBEN0,DAI0 Pin Buffer Enable Register 0" bitfld.long 0x00 24.--29. " PB05 ,Pin Buffer Enable 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " PB04 ,Pin Buffer Enable 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " PB03 ,Pin Buffer Enable 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " PB02 ,Pin Buffer Enable 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " PB01 ,Pin Buffer Enable 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x124++0x3 line.long 0x00 "DAI0_PBEN1,DAI0 Pin Buffer Enable Register 1" bitfld.long 0x00 24.--29. " PB10 ,Pin Buffer Enable 10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " PB09 ,Pin Buffer Enable 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " PB08 ,Pin Buffer Enable 8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " PB07 ,Pin Buffer Enable 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " PB06 ,Pin Buffer Enable 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x128++0x3 line.long 0x00 "DAI0_PBEN2,DAI0 Pin Buffer Enable Register 2" bitfld.long 0x00 24.--29. " PB15 ,Pin Buffer Enable 15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " PB14 ,Pin Buffer Enable 14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " PB13 ,Pin Buffer Enable 13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " PB12 ,Pin Buffer Enable 12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " PB11 ,Pin Buffer Enable 11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x12C++0x3 line.long 0x00 "DAI0_PBEN3,DAI0 Pin Buffer Enable Register 3" bitfld.long 0x00 24.--29. " PB20 ,Pin Buffer Enable 20" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " PB19 ,Pin Buffer Enable 19" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " PB18 ,Pin Buffer Enable 18" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " PB17 ,Pin Buffer Enable 17" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " PB16 ,Pin Buffer Enable 16" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x140++0x3 line.long 0x00 "DAI0_IMSK_FE,DAI0 Falling-Edge Interrupt Mask Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x144++0x3 line.long 0x00 "DAI0_IMSK_RE,DAI0 Rising-Edge Interrupt Mask Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x150++0x3 line.long 0x00 "DAI0_IMSK_PRI,DAI0 Core Interrupt Priority Assignment Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receiver Non-Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x160++0x3 line.long 0x00 "DAI0_IRPTL_H,DAI0 High Priority Interrupt Latch Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x164++0x3 line.long 0x00 "DAI0_IRPTL_L,DAI0 Low Priority Interrupt Latch Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x170++0x3 line.long 0x00 "DAI0_IRPTL_HS,DAI0 Shadow High Priority Interrupt Latch Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x174++0x3 line.long 0x00 "DAI0_IRPTL_LS,DAI0 Shadow Low Priority Interrupt Latch Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receiver Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Emphasis Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Error Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x224++0x3 line.long 0x00 "DAI0_PIN_STAT,DAI0 Pin Status Register" bitfld.long 0x00 19. " PB20 ,Pin Buffer 20 Status" "0,1" bitfld.long 0x00 18. " PB19 ,Pin Buffer 19 Status" "0,1" bitfld.long 0x00 17. " PB18 ,Pin Buffer 18 Status" "0,1" bitfld.long 0x00 16. " PB17 ,Pin Buffer 17 Status" "0,1" newline bitfld.long 0x00 15. " PB16 ,Pin Buffer 16 Status" "0,1" bitfld.long 0x00 14. " PB15 ,Pin Buffer 15 Status" "0,1" bitfld.long 0x00 13. " PB14 ,Pin Buffer 14 Status" "0,1" bitfld.long 0x00 12. " PB13 ,Pin Buffer 13 Status" "0,1" newline bitfld.long 0x00 11. " PB12 ,Pin Buffer 12 Status" "0,1" bitfld.long 0x00 10. " PB11 ,Pin Buffer 11 Status" "0,1" bitfld.long 0x00 9. " PB10 ,Pin Buffer 10 Status" "0,1" bitfld.long 0x00 8. " PB09 ,Pin Buffer 09 Status" "0,1" newline bitfld.long 0x00 7. " PB08 ,Pin Buffer 08 Status" "0,1" bitfld.long 0x00 6. " PB07 ,Pin Buffer 07 Status" "0,1" bitfld.long 0x00 5. " PB06 ,Pin Buffer 06 Status" "0,1" bitfld.long 0x00 4. " PB05 ,Pin Buffer 05 Status" "0,1" newline bitfld.long 0x00 3. " PB04 ,Pin Buffer 04 Status" "0,1" bitfld.long 0x00 2. " PB03 ,Pin Buffer 03 Status" "0,1" bitfld.long 0x00 1. " PB02 ,Pin Buffer 02 Status" "0,1" bitfld.long 0x00 0. " PB01 ,Pin Buffer 01 Status" "0,1" tree.end tree "DAI1" base ad:0x310CB0C0 width 15. group.long 0x0++0x3 line.long 0x00 "DAI1_CLK0,DAI1 Clock Routing Control Register 0" bitfld.long 0x00 25.--29. " IN5 ,Input Clock 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Clock 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Clock 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input Clock 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x4++0x3 line.long 0x00 "DAI1_CLK1,DAI1 Clock Routing Control Register 1" bitfld.long 0x00 25.--29. " IN5 ,Input Clock 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Clock 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Clock 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input Clock 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x8++0x3 line.long 0x00 "DAI1_CLK2,DAI1 Clock Routing Control Register 2" bitfld.long 0x00 10.--14. " IN2 ,Input Clock 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0xC++0x3 line.long 0x00 "DAI1_CLK3,DAI1 Clock Routing Control Register 3" bitfld.long 0x00 25.--29. " IN5 ,Input Clock 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x10++0x3 line.long 0x00 "DAI1_CLK4,DAI1 Clock Routing Control Register 4" bitfld.long 0x00 25.--29. " IN5 ,Input Clock 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Clock 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Clock 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x14++0x3 line.long 0x00 "DAI1_CLK5,DAI1 Clock Routing Control Register 5" bitfld.long 0x00 5.--9. " IN1 ,Input Clock 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Clock 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x40++0x3 line.long 0x00 "DAI1_DAT0,DAI1 Serial Data Routing Control Register 0" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x44++0x3 line.long 0x00 "DAI1_DAT1,DAI1 Serial Data Routing Control Register 1" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x48++0x3 line.long 0x00 "DAI1_DAT2,DAI1 Serial Data Routing Control Register 2" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x4C++0x3 line.long 0x00 "DAI1_DAT3,DAI1 Serial Data Routing Control Register 3" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x50++0x3 line.long 0x00 "DAI1_DAT4,DAI1 Serial Data Routing Control Register 4" bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x54++0x3 line.long 0x00 "DAI1_DAT5,DAI1 Serial Data Routing Control Register 5" bitfld.long 0x00 24.--29. " IN4 ,Input Data 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x58++0x3 line.long 0x00 "DAI1_DAT6,DAI1 Serial Data Routing Control Register 6" bitfld.long 0x00 18.--23. " IN3 ,Input Data 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " IN2 ,Input Data 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " IN1 ,Input Data 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. " IN0 ,Input Data 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x80++0x3 line.long 0x00 "DAI1_FS0,DAI1 Frame Sync Routing Control Register 0" bitfld.long 0x00 25.--29. " IN5 ,Input Frame Sync 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Frame Sync 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Frame Sync 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input Frame Sync 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input Frame Sync 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Frame Sync 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x84++0x3 line.long 0x00 "DAI1_FS1,DAI1 Frame Sync Routing Control Register 1" bitfld.long 0x00 25.--29. " IN5 ,Input Frame Sync 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input Frame Sync 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input Frame Sync 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input Frame Sync 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input Frame Sync 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Frame Sync 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x88++0x3 line.long 0x00 "DAI1_FS2,DAI1 Frame Sync Routing Control Register 2" bitfld.long 0x00 10.--14. " IN2 ,Input Frame Sync 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--9. " IN1 ,Input Frame Sync 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Frame Sync 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x90++0x3 line.long 0x00 "DAI1_FS4,DAI1 Frame Sync Routing Control Register 4" bitfld.long 0x00 5.--9. " IN1 ,Input Frame Sync 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input Frame Sync 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0xC0++0x3 line.long 0x00 "DAI1_PIN0,DAI1 Pin Buffer Assignment Register 0" hexmask.long.byte 0x00 21.--27. 1. " PB04 ,Pin Buffer 4 Input" hexmask.long.byte 0x00 14.--20. 1. " PB03 ,Pin Buffer 3 Input" hexmask.long.byte 0x00 7.--13. 1. " PB02 ,Pin Buffer 2 Input" hexmask.long.byte 0x00 0.--6. 1. " PB01 ,Pin Buffer 1 Input" group.long 0xC4++0x3 line.long 0x00 "DAI1_PIN1,DAI1 Pin Buffer Assignment Register 1" hexmask.long.byte 0x00 21.--27. 1. " PB08 ,Pin Buffer 8 Input" hexmask.long.byte 0x00 14.--20. 1. " PB07 ,Pin Buffer 7 Input" hexmask.long.byte 0x00 7.--13. 1. " PB06 ,Pin Buffer 6 Input" hexmask.long.byte 0x00 0.--6. 1. " PB05 ,Pin Buffer 5 Input" group.long 0xC8++0x3 line.long 0x00 "DAI1_PIN2,DAI1 Pin Buffer Assignment Register 2" hexmask.long.byte 0x00 21.--27. 1. " PB12 ,Pin Buffer 12 Input" hexmask.long.byte 0x00 14.--20. 1. " PB11 ,Pin Buffer 11 Input" hexmask.long.byte 0x00 7.--13. 1. " PB10 ,Pin Buffer 10 Input" hexmask.long.byte 0x00 0.--6. 1. " PB09 ,Pin Buffer 9 Input" group.long 0xCC++0x3 line.long 0x00 "DAI1_PIN3,DAI1 Pin Buffer Assignment Register 3" hexmask.long.byte 0x00 21.--27. 1. " PB16 ,Pin Buffer 16 Input" hexmask.long.byte 0x00 14.--20. 1. " PB15 ,Pin Buffer 15 Input" hexmask.long.byte 0x00 7.--13. 1. " PB14 ,Pin Buffer 14 Input" hexmask.long.byte 0x00 0.--6. 1. " PB13 ,Pin Buffer 13 Input" group.long 0xD0++0x3 line.long 0x00 "DAI1_PIN4,DAI1 Pin Buffer Assignment Register 4" bitfld.long 0x00 29. " INV20 ,Pin Buffer 20 Invert" "0,1" bitfld.long 0x00 28. " INV19 ,Pin Buffer 19 Invert" "0,1" hexmask.long.byte 0x00 21.--27. 1. " PB20 ,Pin Buffer 20 Input" hexmask.long.byte 0x00 14.--20. 1. " PB19 ,Pin Buffer 19 Input" newline hexmask.long.byte 0x00 7.--13. 1. " PB18 ,Pin Buffer 18 Input" hexmask.long.byte 0x00 0.--6. 1. " PB17 ,Pin Buffer 17 Input" group.long 0x100++0x3 line.long 0x00 "DAI1_MISC0,DAI1 Miscellaneous Control Register 0" bitfld.long 0x00 31. " INV11 ,Invert 11" "0,1" bitfld.long 0x00 30. " INV10 ,Invert 10" "0,1" bitfld.long 0x00 25.--29. " IN11 ,Input 11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN10 ,Input 10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 15.--19. " IN9 ,Input 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN8 ,Input 8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5.--9. " IN7 ,Input 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN6 ,Input 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x104++0x3 line.long 0x00 "DAI1_MISC1,DAI1 Miscellaneous Control Register 1" bitfld.long 0x00 25.--29. " IN5 ,Input 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 20.--24. " IN4 ,Input 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15.--19. " IN3 ,Input 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 10.--14. " IN2 ,Input 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 5.--9. " IN1 ,Input 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0.--4. " IN0 ,Input 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x120++0x3 line.long 0x00 "DAI1_PBEN0,DAI1 Pin Buffer Enable Register 0" bitfld.long 0x00 24.--29. " PB05 ,Pin Buffer Enable 5" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " PB04 ,Pin Buffer Enable 4" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " PB03 ,Pin Buffer Enable 3" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " PB02 ,Pin Buffer Enable 2" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " PB01 ,Pin Buffer Enable 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x124++0x3 line.long 0x00 "DAI1_PBEN1,DAI1 Pin Buffer Enable Register 1" bitfld.long 0x00 24.--29. " PB10 ,Pin Buffer Enable 10" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " PB09 ,Pin Buffer Enable 9" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " PB08 ,Pin Buffer Enable 8" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " PB07 ,Pin Buffer Enable 7" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " PB06 ,Pin Buffer Enable 6" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x128++0x3 line.long 0x00 "DAI1_PBEN2,DAI1 Pin Buffer Enable Register 2" bitfld.long 0x00 24.--29. " PB15 ,Pin Buffer Enable 15" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " PB14 ,Pin Buffer Enable 14" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " PB13 ,Pin Buffer Enable 13" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " PB12 ,Pin Buffer Enable 12" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " PB11 ,Pin Buffer Enable 11" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x12C++0x3 line.long 0x00 "DAI1_PBEN3,DAI1 Pin Buffer Enable Register 3" bitfld.long 0x00 24.--29. " PB20 ,Pin Buffer Enable 20" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 18.--23. " PB19 ,Pin Buffer Enable 19" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--17. " PB18 ,Pin Buffer Enable 18" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " PB17 ,Pin Buffer Enable 17" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 0.--5. " PB16 ,Pin Buffer Enable 16" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x140++0x3 line.long 0x00 "DAI1_IMSK_FE,DAI1 Falling-Edge Interrupt Mask Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x144++0x3 line.long 0x00 "DAI1_IMSK_RE,DAI1 Rising-Edge Interrupt Mask Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x150++0x3 line.long 0x00 "DAI1_IMSK_PRI,DAI1 Core Interrupt Priority Assignment Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receiver Non-Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x160++0x3 line.long 0x00 "DAI1_IRPTL_H,DAI1 High Priority Interrupt Latch Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x164++0x3 line.long 0x00 "DAI1_IRPTL_L,DAI1 Low Priority Interrupt Latch Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x170++0x3 line.long 0x00 "DAI1_IRPTL_HS,DAI1 Shadow High Priority Interrupt Latch Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receive Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x174++0x3 line.long 0x00 "DAI1_IRPTL_LS,DAI1 Shadow Low Priority Interrupt Latch Register" bitfld.long 0x00 31. " MISCINT9 ,Miscellaneous Interrupt 9" "0,1" bitfld.long 0x00 30. " MISCINT8 ,Miscellaneous Interrupt 8" "0,1" bitfld.long 0x00 29. " MISCINT7 ,Miscellaneous Interrupt 7" "0,1" bitfld.long 0x00 28. " MISCINT6 ,Miscellaneous Interrupt 6" "0,1" newline bitfld.long 0x00 27. " MISCINT5 ,Miscellaneous Interrupt 5" "0,1" bitfld.long 0x00 26. " MISCINT4 ,Miscellaneous Interrupt 4" "0,1" bitfld.long 0x00 25. " MISCINT3 ,Miscellaneous Interrupt 3" "0,1" bitfld.long 0x00 24. " MISCINT2 ,Miscellaneous Interrupt 2" "0,1" newline bitfld.long 0x00 23. " MISCINT1 ,Miscellaneous Interrupt 1" "0,1" bitfld.long 0x00 22. " MISCINT0 ,Miscellaneous Interrupt 0" "0,1" bitfld.long 0x00 21. " SRC3MUTE ,SRC3 Mute" "0,1" bitfld.long 0x00 20. " SRC2MUTE ,SRC2 Mute" "0,1" newline bitfld.long 0x00 19. " SRC1MUTE ,SRC1 Mute" "0,1" bitfld.long 0x00 18. " SRC0MUTE ,SRC0 Mute" "0,1" bitfld.long 0x00 4. " RXNONAUDIO ,Receiver Non Audio" "0,1" bitfld.long 0x00 2. " RXLOSSOFLOCK ,Receive Emphasis Loss of Lock" "0,1" newline bitfld.long 0x00 1. " RXLOCK ,Receive Error Lock" "0,1" bitfld.long 0x00 0. " RXVALID ,Receive Valid" "0,1" group.long 0x224++0x3 line.long 0x00 "DAI1_PIN_STAT,DAI1 Pin Status Register" bitfld.long 0x00 19. " PB20 ,Pin Buffer 20 Status" "0,1" bitfld.long 0x00 18. " PB19 ,Pin Buffer 19 Status" "0,1" bitfld.long 0x00 17. " PB18 ,Pin Buffer 18 Status" "0,1" bitfld.long 0x00 16. " PB17 ,Pin Buffer 17 Status" "0,1" newline bitfld.long 0x00 15. " PB16 ,Pin Buffer 16 Status" "0,1" bitfld.long 0x00 14. " PB15 ,Pin Buffer 15 Status" "0,1" bitfld.long 0x00 13. " PB14 ,Pin Buffer 14 Status" "0,1" bitfld.long 0x00 12. " PB13 ,Pin Buffer 13 Status" "0,1" newline bitfld.long 0x00 11. " PB12 ,Pin Buffer 12 Status" "0,1" bitfld.long 0x00 10. " PB11 ,Pin Buffer 11 Status" "0,1" bitfld.long 0x00 9. " PB10 ,Pin Buffer 10 Status" "0,1" bitfld.long 0x00 8. " PB09 ,Pin Buffer 09 Status" "0,1" newline bitfld.long 0x00 7. " PB08 ,Pin Buffer 08 Status" "0,1" bitfld.long 0x00 6. " PB07 ,Pin Buffer 07 Status" "0,1" bitfld.long 0x00 5. " PB06 ,Pin Buffer 06 Status" "0,1" bitfld.long 0x00 4. " PB05 ,Pin Buffer 05 Status" "0,1" newline bitfld.long 0x00 3. " PB04 ,Pin Buffer 04 Status" "0,1" bitfld.long 0x00 2. " PB03 ,Pin Buffer 03 Status" "0,1" bitfld.long 0x00 1. " PB02 ,Pin Buffer 02 Status" "0,1" bitfld.long 0x00 0. " PB01 ,Pin Buffer 01 Status" "0,1" tree.end tree.end tree "DAPROM (DAP ROM)" base ad:0x31100000 width 20. group.long 0x0++0x3 line.long 0x00 "DAPROM0_ROMENTRY00,DAPROM0 ROM Entry 00" group.long 0x4++0x3 line.long 0x00 "DAPROM0_ROMENTRY01,DAPROM0 ROM Entry 01" group.long 0x8++0x3 line.long 0x00 "DAPROM0_ROMENTRY02,DAPROM0 ROM Entry 02" group.long 0xC++0x3 line.long 0x00 "DAPROM0_ROMENTRY03,DAPROM0 ROM Entry 03" group.long 0x10++0x3 line.long 0x00 "DAPROM0_ROMENTRY04,DAPROM0 ROM Entry 04" group.long 0x14++0x3 line.long 0x00 "DAPROM0_ROMENTRY05,DAPROM0 ROM Entry 05" group.long 0x18++0x3 line.long 0x00 "DAPROM0_ROMENTRY06,DAPROM0 ROM Entry 06" group.long 0x1C++0x3 line.long 0x00 "DAPROM0_ROMENTRY07,DAPROM0 ROM Entry 07" group.long 0x20++0x3 line.long 0x00 "DAPROM0_ROMENTRY08,DAPROM0 ROM Entry 08" group.long 0x24++0x3 line.long 0x00 "DAPROM0_ROMENTRY09,DAPROM0 ROM Entry 09" group.long 0x28++0x3 line.long 0x00 "DAPROM0_ROMENTRY10,DAPROM0 ROM Entry 10" group.long 0x2C++0x3 line.long 0x00 "DAPROM0_ROMENTRY11,DAPROM0 ROM Entry 11" group.long 0x30++0x3 line.long 0x00 "DAPROM0_ROMENTRY12,DAPROM0 ROM Entry 12" group.long 0x34++0x3 line.long 0x00 "DAPROM0_ROMENTRY13,DAPROM0 ROM Entry 13" tree.end tree "DMA (Direct Memory Access)" tree "DMA0" base ad:0x31022000 width 17. group.long 0x0++0x3 line.long 0x00 "DMA0_DSCPTR_NXT,DMA0 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA0_ADDRSTART,DMA0 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA0_CFG,DMA0 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA0_XCNT,DMA0 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA0_XMOD,DMA0 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA0_YCNT,DMA0 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA0_YMOD,DMA0 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA0_DSCPTR_CUR,DMA0 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA0_DSCPTR_PRV,DMA0 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA0_ADDR_CUR,DMA0 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA0_STAT,DMA0 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA0_XCNT_CUR,DMA0 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA0_YCNT_CUR,DMA0 Current Row Count (2D only) Register" tree.end tree "DMA1" base ad:0x31022080 width 17. group.long 0x0++0x3 line.long 0x00 "DMA1_DSCPTR_NXT,DMA1 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA1_ADDRSTART,DMA1 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA1_CFG,DMA1 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA1_XCNT,DMA1 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA1_XMOD,DMA1 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA1_YCNT,DMA1 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA1_YMOD,DMA1 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA1_DSCPTR_CUR,DMA1 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA1_DSCPTR_PRV,DMA1 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA1_ADDR_CUR,DMA1 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA1_STAT,DMA1 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA1_XCNT_CUR,DMA1 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA1_YCNT_CUR,DMA1 Current Row Count (2D only) Register" tree.end tree "DMA3" base ad:0x31022180 width 17. group.long 0x0++0x3 line.long 0x00 "DMA3_DSCPTR_NXT,DMA3 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA3_ADDRSTART,DMA3 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA3_CFG,DMA3 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA3_XCNT,DMA3 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA3_XMOD,DMA3 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA3_YCNT,DMA3 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA3_YMOD,DMA3 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA3_DSCPTR_CUR,DMA3 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA3_DSCPTR_PRV,DMA3 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA3_ADDR_CUR,DMA3 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA3_STAT,DMA3 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA3_XCNT_CUR,DMA3 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA3_YCNT_CUR,DMA3 Current Row Count (2D only) Register" tree.end tree "DMA2" base ad:0x31022100 width 17. group.long 0x0++0x3 line.long 0x00 "DMA2_DSCPTR_NXT,DMA2 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA2_ADDRSTART,DMA2 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA2_CFG,DMA2 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA2_XCNT,DMA2 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA2_XMOD,DMA2 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA2_YCNT,DMA2 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA2_YMOD,DMA2 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA2_DSCPTR_CUR,DMA2 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA2_DSCPTR_PRV,DMA2 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA2_ADDR_CUR,DMA2 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA2_STAT,DMA2 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA2_XCNT_CUR,DMA2 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA2_YCNT_CUR,DMA2 Current Row Count (2D only) Register" tree.end tree "DMA4" base ad:0x31022200 width 17. group.long 0x0++0x3 line.long 0x00 "DMA4_DSCPTR_NXT,DMA4 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA4_ADDRSTART,DMA4 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA4_CFG,DMA4 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA4_XCNT,DMA4 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA4_XMOD,DMA4 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA4_YCNT,DMA4 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA4_YMOD,DMA4 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA4_DSCPTR_CUR,DMA4 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA4_DSCPTR_PRV,DMA4 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA4_ADDR_CUR,DMA4 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA4_STAT,DMA4 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA4_XCNT_CUR,DMA4 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA4_YCNT_CUR,DMA4 Current Row Count (2D only) Register" tree.end tree "DMA5" base ad:0x31022280 width 17. group.long 0x0++0x3 line.long 0x00 "DMA5_DSCPTR_NXT,DMA5 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA5_ADDRSTART,DMA5 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA5_CFG,DMA5 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA5_XCNT,DMA5 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA5_XMOD,DMA5 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA5_YCNT,DMA5 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA5_YMOD,DMA5 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA5_DSCPTR_CUR,DMA5 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA5_DSCPTR_PRV,DMA5 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA5_ADDR_CUR,DMA5 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA5_STAT,DMA5 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA5_XCNT_CUR,DMA5 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA5_YCNT_CUR,DMA5 Current Row Count (2D only) Register" tree.end tree "DMA6" base ad:0x31022300 width 17. group.long 0x0++0x3 line.long 0x00 "DMA6_DSCPTR_NXT,DMA6 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA6_ADDRSTART,DMA6 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA6_CFG,DMA6 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA6_XCNT,DMA6 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA6_XMOD,DMA6 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA6_YCNT,DMA6 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA6_YMOD,DMA6 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA6_DSCPTR_CUR,DMA6 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA6_DSCPTR_PRV,DMA6 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA6_ADDR_CUR,DMA6 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA6_STAT,DMA6 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA6_XCNT_CUR,DMA6 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA6_YCNT_CUR,DMA6 Current Row Count (2D only) Register" tree.end tree "DMA7" base ad:0x31022380 width 17. group.long 0x0++0x3 line.long 0x00 "DMA7_DSCPTR_NXT,DMA7 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA7_ADDRSTART,DMA7 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA7_CFG,DMA7 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA7_XCNT,DMA7 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA7_XMOD,DMA7 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA7_YCNT,DMA7 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA7_YMOD,DMA7 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA7_DSCPTR_CUR,DMA7 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA7_DSCPTR_PRV,DMA7 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA7_ADDR_CUR,DMA7 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA7_STAT,DMA7 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA7_XCNT_CUR,DMA7 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA7_YCNT_CUR,DMA7 Current Row Count (2D only) Register" tree.end tree "DMA8" base ad:0x31028000 width 17. group.long 0x0++0x3 line.long 0x00 "DMA8_DSCPTR_NXT,DMA8 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA8_ADDRSTART,DMA8 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA8_CFG,DMA8 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA8_XCNT,DMA8 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA8_XMOD,DMA8 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA8_YCNT,DMA8 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA8_YMOD,DMA8 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA8_DSCPTR_CUR,DMA8 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA8_DSCPTR_PRV,DMA8 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA8_ADDR_CUR,DMA8 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA8_STAT,DMA8 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA8_XCNT_CUR,DMA8 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA8_YCNT_CUR,DMA8 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA8_BWLCNT,DMA8 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA8_BWLCNT_CUR,DMA8 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA8_BWMCNT,DMA8 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA8_BWMCNT_CUR,DMA8 Bandwidth Monitor Count Current Register" tree.end tree "DMA9" base ad:0x31028080 width 17. group.long 0x0++0x3 line.long 0x00 "DMA9_DSCPTR_NXT,DMA9 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA9_ADDRSTART,DMA9 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA9_CFG,DMA9 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA9_XCNT,DMA9 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA9_XMOD,DMA9 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA9_YCNT,DMA9 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA9_YMOD,DMA9 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA9_DSCPTR_CUR,DMA9 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA9_DSCPTR_PRV,DMA9 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA9_ADDR_CUR,DMA9 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA9_STAT,DMA9 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA9_XCNT_CUR,DMA9 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA9_YCNT_CUR,DMA9 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA9_BWLCNT,DMA9 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA9_BWLCNT_CUR,DMA9 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA9_BWMCNT,DMA9 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA9_BWMCNT_CUR,DMA9 Bandwidth Monitor Count Current Register" tree.end tree "DMA10" base ad:0x31024000 width 18. group.long 0x0++0x3 line.long 0x00 "DMA10_DSCPTR_NXT,DMA10 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA10_ADDRSTART,DMA10 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA10_CFG,DMA10 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA10_XCNT,DMA10 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA10_XMOD,DMA10 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA10_YCNT,DMA10 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA10_YMOD,DMA10 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA10_DSCPTR_CUR,DMA10 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA10_DSCPTR_PRV,DMA10 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA10_ADDR_CUR,DMA10 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA10_STAT,DMA10 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA10_XCNT_CUR,DMA10 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA10_YCNT_CUR,DMA10 Current Row Count (2D only) Register" tree.end tree "DMA11" base ad:0x31024080 width 18. group.long 0x0++0x3 line.long 0x00 "DMA11_DSCPTR_NXT,DMA11 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA11_ADDRSTART,DMA11 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA11_CFG,DMA11 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA11_XCNT,DMA11 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA11_XMOD,DMA11 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA11_YCNT,DMA11 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA11_YMOD,DMA11 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA11_DSCPTR_CUR,DMA11 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA11_DSCPTR_PRV,DMA11 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA11_ADDR_CUR,DMA11 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA11_STAT,DMA11 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA11_XCNT_CUR,DMA11 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA11_YCNT_CUR,DMA11 Current Row Count (2D only) Register" tree.end tree "DMA12" base ad:0x31024100 width 18. group.long 0x0++0x3 line.long 0x00 "DMA12_DSCPTR_NXT,DMA12 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA12_ADDRSTART,DMA12 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA12_CFG,DMA12 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA12_XCNT,DMA12 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA12_XMOD,DMA12 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA12_YCNT,DMA12 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA12_YMOD,DMA12 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA12_DSCPTR_CUR,DMA12 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA12_DSCPTR_PRV,DMA12 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA12_ADDR_CUR,DMA12 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA12_STAT,DMA12 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA12_XCNT_CUR,DMA12 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA12_YCNT_CUR,DMA12 Current Row Count (2D only) Register" tree.end tree "DMA13" base ad:0x31024180 width 18. group.long 0x0++0x3 line.long 0x00 "DMA13_DSCPTR_NXT,DMA13 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA13_ADDRSTART,DMA13 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA13_CFG,DMA13 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA13_XCNT,DMA13 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA13_XMOD,DMA13 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA13_YCNT,DMA13 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA13_YMOD,DMA13 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA13_DSCPTR_CUR,DMA13 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA13_DSCPTR_PRV,DMA13 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA13_ADDR_CUR,DMA13 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA13_STAT,DMA13 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA13_XCNT_CUR,DMA13 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA13_YCNT_CUR,DMA13 Current Row Count (2D only) Register" tree.end tree "DMA14" base ad:0x31024200 width 18. group.long 0x0++0x3 line.long 0x00 "DMA14_DSCPTR_NXT,DMA14 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA14_ADDRSTART,DMA14 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA14_CFG,DMA14 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA14_XCNT,DMA14 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA14_XMOD,DMA14 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA14_YCNT,DMA14 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA14_YMOD,DMA14 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA14_DSCPTR_CUR,DMA14 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA14_DSCPTR_PRV,DMA14 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA14_ADDR_CUR,DMA14 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA14_STAT,DMA14 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA14_XCNT_CUR,DMA14 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA14_YCNT_CUR,DMA14 Current Row Count (2D only) Register" tree.end tree "DMA15" base ad:0x31024280 width 18. group.long 0x0++0x3 line.long 0x00 "DMA15_DSCPTR_NXT,DMA15 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA15_ADDRSTART,DMA15 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA15_CFG,DMA15 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA15_XCNT,DMA15 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA15_XMOD,DMA15 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA15_YCNT,DMA15 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA15_YMOD,DMA15 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA15_DSCPTR_CUR,DMA15 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA15_DSCPTR_PRV,DMA15 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA15_ADDR_CUR,DMA15 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA15_STAT,DMA15 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA15_XCNT_CUR,DMA15 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA15_YCNT_CUR,DMA15 Current Row Count (2D only) Register" tree.end tree "DMA16" base ad:0x31024300 width 18. group.long 0x0++0x3 line.long 0x00 "DMA16_DSCPTR_NXT,DMA16 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA16_ADDRSTART,DMA16 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA16_CFG,DMA16 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA16_XCNT,DMA16 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA16_XMOD,DMA16 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA16_YCNT,DMA16 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA16_YMOD,DMA16 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA16_DSCPTR_CUR,DMA16 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA16_DSCPTR_PRV,DMA16 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA16_ADDR_CUR,DMA16 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA16_STAT,DMA16 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA16_XCNT_CUR,DMA16 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA16_YCNT_CUR,DMA16 Current Row Count (2D only) Register" tree.end tree "DMA17" base ad:0x31024380 width 18. group.long 0x0++0x3 line.long 0x00 "DMA17_DSCPTR_NXT,DMA17 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA17_ADDRSTART,DMA17 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA17_CFG,DMA17 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA17_XCNT,DMA17 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA17_XMOD,DMA17 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA17_YCNT,DMA17 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA17_YMOD,DMA17 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA17_DSCPTR_CUR,DMA17 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA17_DSCPTR_PRV,DMA17 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA17_ADDR_CUR,DMA17 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA17_STAT,DMA17 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA17_XCNT_CUR,DMA17 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA17_YCNT_CUR,DMA17 Current Row Count (2D only) Register" tree.end tree "DMA18" base ad:0x31028100 width 18. group.long 0x0++0x3 line.long 0x00 "DMA18_DSCPTR_NXT,DMA18 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA18_ADDRSTART,DMA18 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA18_CFG,DMA18 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA18_XCNT,DMA18 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA18_XMOD,DMA18 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA18_YCNT,DMA18 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA18_YMOD,DMA18 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA18_DSCPTR_CUR,DMA18 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA18_DSCPTR_PRV,DMA18 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA18_ADDR_CUR,DMA18 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA18_STAT,DMA18 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA18_XCNT_CUR,DMA18 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA18_YCNT_CUR,DMA18 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA18_BWLCNT,DMA18 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA18_BWLCNT_CUR,DMA18 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA18_BWMCNT,DMA18 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA18_BWMCNT_CUR,DMA18 Bandwidth Monitor Count Current Register" tree.end tree "DMA19" base ad:0x31028180 width 18. group.long 0x0++0x3 line.long 0x00 "DMA19_DSCPTR_NXT,DMA19 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA19_ADDRSTART,DMA19 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA19_CFG,DMA19 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA19_XCNT,DMA19 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA19_XMOD,DMA19 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA19_YCNT,DMA19 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA19_YMOD,DMA19 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA19_DSCPTR_CUR,DMA19 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA19_DSCPTR_PRV,DMA19 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA19_ADDR_CUR,DMA19 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA19_STAT,DMA19 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA19_XCNT_CUR,DMA19 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA19_YCNT_CUR,DMA19 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA19_BWLCNT,DMA19 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA19_BWLCNT_CUR,DMA19 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA19_BWMCNT,DMA19 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA19_BWMCNT_CUR,DMA19 Bandwidth Monitor Count Current Register" tree.end tree "DMA20" base ad:0x31026080 width 18. group.long 0x0++0x3 line.long 0x00 "DMA20_DSCPTR_NXT,DMA20 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA20_ADDRSTART,DMA20 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA20_CFG,DMA20 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA20_XCNT,DMA20 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA20_XMOD,DMA20 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA20_YCNT,DMA20 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA20_YMOD,DMA20 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA20_DSCPTR_CUR,DMA20 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA20_DSCPTR_PRV,DMA20 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA20_ADDR_CUR,DMA20 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA20_STAT,DMA20 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA20_XCNT_CUR,DMA20 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA20_YCNT_CUR,DMA20 Current Row Count (2D only) Register" tree.end tree "DMA21" base ad:0x31026000 width 18. group.long 0x0++0x3 line.long 0x00 "DMA21_DSCPTR_NXT,DMA21 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA21_ADDRSTART,DMA21 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA21_CFG,DMA21 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA21_XCNT,DMA21 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA21_XMOD,DMA21 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA21_YCNT,DMA21 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA21_YMOD,DMA21 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA21_DSCPTR_CUR,DMA21 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA21_DSCPTR_PRV,DMA21 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA21_ADDR_CUR,DMA21 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA21_STAT,DMA21 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA21_XCNT_CUR,DMA21 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA21_YCNT_CUR,DMA21 Current Row Count (2D only) Register" tree.end tree "DMA22" base ad:0x31046000 width 18. group.long 0x0++0x3 line.long 0x00 "DMA22_DSCPTR_NXT,DMA22 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA22_ADDRSTART,DMA22 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA22_CFG,DMA22 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA22_XCNT,DMA22 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA22_XMOD,DMA22 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA22_YCNT,DMA22 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA22_YMOD,DMA22 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA22_DSCPTR_CUR,DMA22 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA22_DSCPTR_PRV,DMA22 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA22_ADDR_CUR,DMA22 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA22_STAT,DMA22 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA22_XCNT_CUR,DMA22 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA22_YCNT_CUR,DMA22 Current Row Count (2D only) Register" tree.end tree "DMA23" base ad:0x31046080 width 18. group.long 0x0++0x3 line.long 0x00 "DMA23_DSCPTR_NXT,DMA23 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA23_ADDRSTART,DMA23 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA23_CFG,DMA23 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA23_XCNT,DMA23 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA23_XMOD,DMA23 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA23_YCNT,DMA23 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA23_YMOD,DMA23 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA23_DSCPTR_CUR,DMA23 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA23_DSCPTR_PRV,DMA23 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA23_ADDR_CUR,DMA23 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA23_STAT,DMA23 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA23_XCNT_CUR,DMA23 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA23_YCNT_CUR,DMA23 Current Row Count (2D only) Register" tree.end tree "DMA24" base ad:0x31046100 width 18. group.long 0x0++0x3 line.long 0x00 "DMA24_DSCPTR_NXT,DMA24 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA24_ADDRSTART,DMA24 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA24_CFG,DMA24 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA24_XCNT,DMA24 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA24_XMOD,DMA24 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA24_YCNT,DMA24 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA24_YMOD,DMA24 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA24_DSCPTR_CUR,DMA24 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA24_DSCPTR_PRV,DMA24 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA24_ADDR_CUR,DMA24 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA24_STAT,DMA24 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA24_XCNT_CUR,DMA24 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA24_YCNT_CUR,DMA24 Current Row Count (2D only) Register" tree.end tree "DMA25" base ad:0x31046180 width 18. group.long 0x0++0x3 line.long 0x00 "DMA25_DSCPTR_NXT,DMA25 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA25_ADDRSTART,DMA25 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA25_CFG,DMA25 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA25_XCNT,DMA25 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA25_XMOD,DMA25 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA25_YCNT,DMA25 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA25_YMOD,DMA25 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA25_DSCPTR_CUR,DMA25 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA25_DSCPTR_PRV,DMA25 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA25_ADDR_CUR,DMA25 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA25_STAT,DMA25 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA25_XCNT_CUR,DMA25 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA25_YCNT_CUR,DMA25 Current Row Count (2D only) Register" tree.end tree "DMA26" base ad:0x31046200 width 18. group.long 0x0++0x3 line.long 0x00 "DMA26_DSCPTR_NXT,DMA26 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA26_ADDRSTART,DMA26 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA26_CFG,DMA26 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA26_XCNT,DMA26 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA26_XMOD,DMA26 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA26_YCNT,DMA26 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA26_YMOD,DMA26 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA26_DSCPTR_CUR,DMA26 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA26_DSCPTR_PRV,DMA26 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA26_ADDR_CUR,DMA26 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA26_STAT,DMA26 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA26_XCNT_CUR,DMA26 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA26_YCNT_CUR,DMA26 Current Row Count (2D only) Register" tree.end tree "DMA27" base ad:0x31046280 width 18. group.long 0x0++0x3 line.long 0x00 "DMA27_DSCPTR_NXT,DMA27 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA27_ADDRSTART,DMA27 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA27_CFG,DMA27 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA27_XCNT,DMA27 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA27_XMOD,DMA27 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA27_YCNT,DMA27 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA27_YMOD,DMA27 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA27_DSCPTR_CUR,DMA27 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA27_DSCPTR_PRV,DMA27 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA27_ADDR_CUR,DMA27 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA27_STAT,DMA27 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA27_XCNT_CUR,DMA27 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA27_YCNT_CUR,DMA27 Current Row Count (2D only) Register" tree.end tree "DMA28" base ad:0x31046300 width 18. group.long 0x0++0x3 line.long 0x00 "DMA28_DSCPTR_NXT,DMA28 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA28_ADDRSTART,DMA28 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA28_CFG,DMA28 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA28_XCNT,DMA28 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA28_XMOD,DMA28 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA28_YCNT,DMA28 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA28_YMOD,DMA28 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA28_DSCPTR_CUR,DMA28 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA28_DSCPTR_PRV,DMA28 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA28_ADDR_CUR,DMA28 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA28_STAT,DMA28 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA28_XCNT_CUR,DMA28 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA28_YCNT_CUR,DMA28 Current Row Count (2D only) Register" tree.end tree "DMA29" base ad:0x31046380 width 18. group.long 0x0++0x3 line.long 0x00 "DMA29_DSCPTR_NXT,DMA29 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA29_ADDRSTART,DMA29 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA29_CFG,DMA29 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA29_XCNT,DMA29 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA29_XMOD,DMA29 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA29_YCNT,DMA29 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA29_YMOD,DMA29 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA29_DSCPTR_CUR,DMA29 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA29_DSCPTR_PRV,DMA29 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA29_ADDR_CUR,DMA29 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA29_STAT,DMA29 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA29_XCNT_CUR,DMA29 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA29_YCNT_CUR,DMA29 Current Row Count (2D only) Register" tree.end tree "DMA30" base ad:0x30FFF000 width 18. group.long 0x0++0x3 line.long 0x00 "DMA30_DSCPTR_NXT,DMA30 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA30_ADDRSTART,DMA30 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA30_CFG,DMA30 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA30_XCNT,DMA30 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA30_XMOD,DMA30 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA30_YCNT,DMA30 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA30_YMOD,DMA30 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA30_DSCPTR_CUR,DMA30 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA30_DSCPTR_PRV,DMA30 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA30_ADDR_CUR,DMA30 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA30_STAT,DMA30 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA30_XCNT_CUR,DMA30 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA30_YCNT_CUR,DMA30 Current Row Count (2D only) Register" tree.end tree "DMA31" base ad:0x3102A100 width 18. group.long 0x0++0x3 line.long 0x00 "DMA31_DSCPTR_NXT,DMA31 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA31_ADDRSTART,DMA31 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA31_CFG,DMA31 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA31_XCNT,DMA31 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA31_XMOD,DMA31 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA31_YCNT,DMA31 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA31_YMOD,DMA31 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA31_DSCPTR_CUR,DMA31 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA31_DSCPTR_PRV,DMA31 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA31_ADDR_CUR,DMA31 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA31_STAT,DMA31 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA31_XCNT_CUR,DMA31 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA31_YCNT_CUR,DMA31 Current Row Count (2D only) Register" tree.end tree "DMA32" base ad:0x3102A000 width 18. group.long 0x0++0x3 line.long 0x00 "DMA32_DSCPTR_NXT,DMA32 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA32_ADDRSTART,DMA32 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA32_CFG,DMA32 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA32_XCNT,DMA32 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA32_XMOD,DMA32 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA32_YCNT,DMA32 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA32_YMOD,DMA32 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA32_DSCPTR_CUR,DMA32 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA32_DSCPTR_PRV,DMA32 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA32_ADDR_CUR,DMA32 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA32_STAT,DMA32 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA32_XCNT_CUR,DMA32 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA32_YCNT_CUR,DMA32 Current Row Count (2D only) Register" tree.end tree "DMA33" base ad:0x3102A080 width 18. group.long 0x0++0x3 line.long 0x00 "DMA33_DSCPTR_NXT,DMA33 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA33_ADDRSTART,DMA33 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA33_CFG,DMA33 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA33_XCNT,DMA33 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA33_XMOD,DMA33 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA33_YCNT,DMA33 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA33_YMOD,DMA33 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA33_DSCPTR_CUR,DMA33 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA33_DSCPTR_PRV,DMA33 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA33_ADDR_CUR,DMA33 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA33_STAT,DMA33 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA33_XCNT_CUR,DMA33 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA33_YCNT_CUR,DMA33 Current Row Count (2D only) Register" tree.end tree "DMA34" base ad:0x31026180 width 18. group.long 0x0++0x3 line.long 0x00 "DMA34_DSCPTR_NXT,DMA34 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA34_ADDRSTART,DMA34 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA34_CFG,DMA34 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA34_XCNT,DMA34 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA34_XMOD,DMA34 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA34_YCNT,DMA34 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA34_YMOD,DMA34 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA34_DSCPTR_CUR,DMA34 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA34_DSCPTR_PRV,DMA34 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA34_ADDR_CUR,DMA34 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA34_STAT,DMA34 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA34_XCNT_CUR,DMA34 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA34_YCNT_CUR,DMA34 Current Row Count (2D only) Register" tree.end tree "DMA35" base ad:0x31026100 width 18. group.long 0x0++0x3 line.long 0x00 "DMA35_DSCPTR_NXT,DMA35 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA35_ADDRSTART,DMA35 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA35_CFG,DMA35 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA35_XCNT,DMA35 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA35_XMOD,DMA35 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA35_YCNT,DMA35 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA35_YMOD,DMA35 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA35_DSCPTR_CUR,DMA35 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA35_DSCPTR_PRV,DMA35 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA35_ADDR_CUR,DMA35 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA35_STAT,DMA35 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA35_XCNT_CUR,DMA35 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA35_YCNT_CUR,DMA35 Current Row Count (2D only) Register" tree.end tree "DMA36" base ad:0x30FFF080 width 18. group.long 0x0++0x3 line.long 0x00 "DMA36_DSCPTR_NXT,DMA36 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA36_ADDRSTART,DMA36 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA36_CFG,DMA36 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA36_XCNT,DMA36 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA36_XMOD,DMA36 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA36_YCNT,DMA36 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA36_YMOD,DMA36 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA36_DSCPTR_CUR,DMA36 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA36_DSCPTR_PRV,DMA36 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA36_ADDR_CUR,DMA36 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA36_STAT,DMA36 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA36_XCNT_CUR,DMA36 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA36_YCNT_CUR,DMA36 Current Row Count (2D only) Register" tree.end tree "DMA37" base ad:0x31026280 width 18. group.long 0x0++0x3 line.long 0x00 "DMA37_DSCPTR_NXT,DMA37 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA37_ADDRSTART,DMA37 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA37_CFG,DMA37 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA37_XCNT,DMA37 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA37_XMOD,DMA37 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA37_YCNT,DMA37 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA37_YMOD,DMA37 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA37_DSCPTR_CUR,DMA37 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA37_DSCPTR_PRV,DMA37 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA37_ADDR_CUR,DMA37 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA37_STAT,DMA37 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA37_XCNT_CUR,DMA37 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA37_YCNT_CUR,DMA37 Current Row Count (2D only) Register" tree.end tree "DMA38" base ad:0x31026200 width 18. group.long 0x0++0x3 line.long 0x00 "DMA38_DSCPTR_NXT,DMA38 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA38_ADDRSTART,DMA38 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA38_CFG,DMA38 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA38_XCNT,DMA38 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA38_XMOD,DMA38 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA38_YCNT,DMA38 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA38_YMOD,DMA38 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA38_DSCPTR_CUR,DMA38 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA38_DSCPTR_PRV,DMA38 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA38_ADDR_CUR,DMA38 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA38_STAT,DMA38 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA38_XCNT_CUR,DMA38 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA38_YCNT_CUR,DMA38 Current Row Count (2D only) Register" tree.end tree "DMA39" base ad:0x3109A000 width 18. group.long 0x0++0x3 line.long 0x00 "DMA39_DSCPTR_NXT,DMA39 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA39_ADDRSTART,DMA39 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA39_CFG,DMA39 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA39_XCNT,DMA39 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA39_XMOD,DMA39 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA39_YCNT,DMA39 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA39_YMOD,DMA39 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA39_DSCPTR_CUR,DMA39 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA39_DSCPTR_PRV,DMA39 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA39_ADDR_CUR,DMA39 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA39_STAT,DMA39 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA39_XCNT_CUR,DMA39 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA39_YCNT_CUR,DMA39 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA39_BWLCNT,DMA39 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA39_BWLCNT_CUR,DMA39 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA39_BWMCNT,DMA39 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA39_BWMCNT_CUR,DMA39 Bandwidth Monitor Count Current Register" tree.end tree "DMA40" base ad:0x3109A080 width 18. group.long 0x0++0x3 line.long 0x00 "DMA40_DSCPTR_NXT,DMA40 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA40_ADDRSTART,DMA40 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA40_CFG,DMA40 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA40_XCNT,DMA40 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA40_XMOD,DMA40 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA40_YCNT,DMA40 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA40_YMOD,DMA40 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA40_DSCPTR_CUR,DMA40 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA40_DSCPTR_PRV,DMA40 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA40_ADDR_CUR,DMA40 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA40_STAT,DMA40 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA40_XCNT_CUR,DMA40 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA40_YCNT_CUR,DMA40 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA40_BWLCNT,DMA40 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA40_BWLCNT_CUR,DMA40 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA40_BWMCNT,DMA40 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA40_BWMCNT_CUR,DMA40 Bandwidth Monitor Count Current Register" tree.end tree "DMA41" base ad:0x3109C200 width 18. group.long 0x0++0x3 line.long 0x00 "DMA41_DSCPTR_NXT,DMA41 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA41_ADDRSTART,DMA41 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA41_CFG,DMA41 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA41_XCNT,DMA41 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA41_XMOD,DMA41 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA41_YCNT,DMA41 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA41_YMOD,DMA41 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA41_DSCPTR_CUR,DMA41 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA41_DSCPTR_PRV,DMA41 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA41_ADDR_CUR,DMA41 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA41_STAT,DMA41 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA41_XCNT_CUR,DMA41 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA41_YCNT_CUR,DMA41 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA41_BWLCNT,DMA41 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA41_BWLCNT_CUR,DMA41 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA41_BWMCNT,DMA41 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA41_BWMCNT_CUR,DMA41 Bandwidth Monitor Count Current Register" tree.end tree "DMA42" base ad:0x3109C400 width 18. group.long 0x0++0x3 line.long 0x00 "DMA42_DSCPTR_NXT,DMA42 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA42_ADDRSTART,DMA42 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA42_CFG,DMA42 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA42_XCNT,DMA42 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA42_XMOD,DMA42 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA42_YCNT,DMA42 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA42_YMOD,DMA42 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA42_DSCPTR_CUR,DMA42 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA42_DSCPTR_PRV,DMA42 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA42_ADDR_CUR,DMA42 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA42_STAT,DMA42 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA42_XCNT_CUR,DMA42 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA42_YCNT_CUR,DMA42 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA42_BWLCNT,DMA42 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA42_BWLCNT_CUR,DMA42 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA42_BWMCNT,DMA42 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA42_BWMCNT_CUR,DMA42 Bandwidth Monitor Count Current Register" tree.end tree "DMA43" base ad:0x3109B000 width 18. group.long 0x0++0x3 line.long 0x00 "DMA43_DSCPTR_NXT,DMA43 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA43_ADDRSTART,DMA43 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA43_CFG,DMA43 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA43_XCNT,DMA43 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA43_XMOD,DMA43 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA43_YCNT,DMA43 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA43_YMOD,DMA43 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA43_DSCPTR_CUR,DMA43 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA43_DSCPTR_PRV,DMA43 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA43_ADDR_CUR,DMA43 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA43_STAT,DMA43 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA43_XCNT_CUR,DMA43 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA43_YCNT_CUR,DMA43 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA43_BWLCNT,DMA43 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA43_BWLCNT_CUR,DMA43 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA43_BWMCNT,DMA43 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA43_BWMCNT_CUR,DMA43 Bandwidth Monitor Count Current Register" tree.end tree "DMA44" base ad:0x3109B080 width 18. group.long 0x0++0x3 line.long 0x00 "DMA44_DSCPTR_NXT,DMA44 Pointer to Next Initial Descriptor Register" group.long 0x4++0x3 line.long 0x00 "DMA44_ADDRSTART,DMA44 Start Address of Current Buffer Register" group.long 0x8++0x3 line.long 0x00 "DMA44_CFG,DMA44 Configuration Register" bitfld.long 0x00 28. " PDRF ,Peripheral Data Request Forward" "0,1" bitfld.long 0x00 26. " TWOD ,Two Dimension Addressing Enable" "0,1" bitfld.long 0x00 25. " DESCIDCPY ,Descriptor ID Copy Control" "0,1" bitfld.long 0x00 24. " TOVEN ,Trigger Overrun Error Enable" "0,1" newline bitfld.long 0x00 22.--23. " TRIG ,Generate Outgoing Trigger" "0,1,2,3" bitfld.long 0x00 20.--21. " INT ,Generate Interrupt Request" "0,1,2,3" bitfld.long 0x00 16.--18. " NDSIZE ,Next Descriptor Set Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 15. " TWAIT ,Wait for Trigger" "0,1" newline bitfld.long 0x00 12.--14. " FLOW ,Next Operation" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " MSIZE ,Memory Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " PSIZE ,Peripheral Transfer Word Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " CADDR ,Use Current Address" "0,1" newline bitfld.long 0x00 2. " SYNC ,Synchronize Work Unit Transitions" "0,1" bitfld.long 0x00 1. " WNR ,Write/Read Channel Direction" "0,1" bitfld.long 0x00 0. " EN ,DMA Channel Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "DMA44_XCNT,DMA44 Inner Loop Count Start Value Register" group.long 0x10++0x3 line.long 0x00 "DMA44_XMOD,DMA44 Inner Loop Address Increment Register" group.long 0x14++0x3 line.long 0x00 "DMA44_YCNT,DMA44 Outer Loop Count Start Value (2D only) Register" group.long 0x18++0x3 line.long 0x00 "DMA44_YMOD,DMA44 Outer Loop Address Increment (2D only) Register" group.long 0x24++0x3 line.long 0x00 "DMA44_DSCPTR_CUR,DMA44 Current Descriptor Pointer Register" group.long 0x28++0x3 line.long 0x00 "DMA44_DSCPTR_PRV,DMA44 Previous Initial Descriptor Pointer Register" hexmask.long 0x00 2.--31. 1. " DESCPPREV ,Descriptor Pointer for Previous Element" bitfld.long 0x00 0. " PDPO ,Previous Descriptor Pointer Overrun" "0,1" group.long 0x2C++0x3 line.long 0x00 "DMA44_ADDR_CUR,DMA44 Current Address Register" group.long 0x30++0x3 line.long 0x00 "DMA44_STAT,DMA44 Status Register" bitfld.long 0x00 20. " TWAIT ,Trigger Wait Status" "0,1" bitfld.long 0x00 16.--18. " FIFOFILL ,FIFO Fill Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " MBWID ,Memory Bus Width" "0,1,2,3" bitfld.long 0x00 12.--13. " PBWID ,Peripheral Bus Width" "0,1,2,3" newline bitfld.long 0x00 8.--10. " RUN ,Run Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " ERRC ,Error Cause" "0,1,2,3,4,5,6,7" bitfld.long 0x00 2. " PIRQ ,Peripheral Interrupt Request" "0,1" bitfld.long 0x00 1. " IRQERR ,Error Interrupt Request" "0,1" newline bitfld.long 0x00 0. " IRQDONE ,Work Unit/Row Done Interrupt" "0,1" group.long 0x34++0x3 line.long 0x00 "DMA44_XCNT_CUR,DMA44 Current Count (1D) or Intra-row XCNT (2D) Register" group.long 0x38++0x3 line.long 0x00 "DMA44_YCNT_CUR,DMA44 Current Row Count (2D only) Register" group.long 0x40++0x3 line.long 0x00 "DMA44_BWLCNT,DMA44 Bandwidth Limit Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count" group.long 0x44++0x3 line.long 0x00 "DMA44_BWLCNT_CUR,DMA44 Bandwidth Limit Count Current Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Bandwidth Limit Count Current" group.long 0x48++0x3 line.long 0x00 "DMA44_BWMCNT,DMA44 Bandwidth Monitor Count Register" group.long 0x4C++0x3 line.long 0x00 "DMA44_BWMCNT_CUR,DMA44 Bandwidth Monitor Count Current Register" tree.end tree.end tree "DMC (Dynamic Memory Controller)" tree "DMC0" base ad:0x31070004 width 26. group.long 0x0++0x3 line.long 0x00 "DMC0_CTL,DMC0 Control Register" bitfld.long 0x00 25. " ZQCL ,ZQ Calibration Long" "0,1" bitfld.long 0x00 24. " ZQCS ,ZQ Calibration Short" "0,1" bitfld.long 0x00 13. " DLLCAL ,DLL Calibration Start" "0,1" bitfld.long 0x00 12. " PPREF ,Postpone Refresh" "0,1" newline bitfld.long 0x00 9.--11. " RDTOWR ,Read-to-Write Cycle" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8. " ADDRMODE ,Addressing (Page/Bank) Mode" "0,1" bitfld.long 0x00 7. " RESET ,Reset SDRAM" "0,1" bitfld.long 0x00 6. " PREC ,Precharge" "0,1" newline bitfld.long 0x00 5. " DPDREQ ,Deep Power-Down Request" "0,1" bitfld.long 0x00 4. " PDREQ ,Power Down Request" "0,1" bitfld.long 0x00 3. " SRREQ ,Self-Refresh Request" "0,1" bitfld.long 0x00 2. " INIT ,Initialize DRAM Start" "0,1" newline bitfld.long 0x00 1. " LPDDR ,Low Power DDR Mode" "0,1" bitfld.long 0x00 0. " DDR3EN ,DDR3 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "DMC0_STAT,DMC0 Status Register" bitfld.long 0x00 25. " ZQCLDONE ,ZQ Calibration Long Done" "0,1" bitfld.long 0x00 24. " ZQCSDONE ,ZQ Calibration Short Done" "0,1" bitfld.long 0x00 20.--23. " PHYRDPHASE ,PHY Read Phase" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " PENDREF ,Pending Refresh" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 13. " DLLCALDONE ,DLL Calibration Done" "0,1" bitfld.long 0x00 7. " RESETDONE ,Reset Done" "0,1" bitfld.long 0x00 5. " DPDACK ,Deep Power-Down Acknowledge" "0,1" bitfld.long 0x00 4. " PDACK ,Power-Down Acknowledge" "0,1" newline bitfld.long 0x00 3. " SRACK ,Self-Refresh Acknowledge" "0,1" bitfld.long 0x00 2. " INITDONE ,Initialization Done" "0,1" bitfld.long 0x00 0. " IDLE ,Idle State" "0,1" group.long 0x8++0x3 line.long 0x00 "DMC0_EFFCTL,DMC0 Efficiency Control Register" bitfld.long 0x00 20.--23. " IDLECYC ,Idle Cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " NUMREF ,Number of Refresh Commands" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 15. " PRECBANK7 ,Precharge Bank 7" "0,1" bitfld.long 0x00 14. " PRECBANK6 ,Precharge Bank 6" "0,1" newline bitfld.long 0x00 13. " PRECBANK5 ,Precharge Bank 5" "0,1" bitfld.long 0x00 12. " PRECBANK4 ,Precharge Bank 4" "0,1" bitfld.long 0x00 11. " PRECBANK3 ,Precharge Bank 3" "0,1" bitfld.long 0x00 10. " PRECBANK2 ,Precharge Bank 2" "0,1" newline bitfld.long 0x00 9. " PRECBANK1 ,Precharge Bank 1" "0,1" bitfld.long 0x00 8. " PRECBANK0 ,Precharge Bank 0" "0,1" group.long 0xC++0x3 line.long 0x00 "DMC0_PRIO,DMC0 Priority ID Register 1" group.long 0x10++0x3 line.long 0x00 "DMC0_PRIOMSK,DMC0 Priority ID Mask Register 1" group.long 0x14++0x3 line.long 0x00 "DMC0_PRIO2,DMC0 Priority ID Register 2" group.long 0x18++0x3 line.long 0x00 "DMC0_PRIOMSK2,DMC0 Priority ID Mask Register 2" group.long 0x3C++0x3 line.long 0x00 "DMC0_CFG,DMC0 Configuration Register" bitfld.long 0x00 12.--15. " EXTBANK ,External Banks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " SDRSIZE ,SDRAM Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. " SDRWID ,SDRAM Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " IFWID ,Interface Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40++0x3 line.long 0x00 "DMC0_TR0,DMC0 Timing 0 Register" bitfld.long 0x00 28.--31. " TMRD ,Timing Mode Register Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 20.--25. " TRC ,Timing Row Cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--16. " TRAS ,Timing Row Active Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 8.--11. " TRP ,Timing RAS Precharge" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. " TWTR ,Timing Write to Read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " TRCD ,Timing RAS to CAS Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x44++0x3 line.long 0x00 "DMC0_TR1,DMC0 Timing 1 Register" bitfld.long 0x00 28.--30. " TRRD ,Timing Read-Read Delay" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 16.--23. 1. " TRFC ,Timing Refresh-to-Command" hexmask.long.word 0x00 0.--13. 1. " TREF ,Timing Refresh Interval" group.long 0x48++0x3 line.long 0x00 "DMC0_TR2,DMC0 Timing 2 Register" bitfld.long 0x00 20.--23. " TCKE ,Timing Clock Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " TXP ,Timing Exit Power Down" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " TWR ,Timing Write Recovery" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " TRTP ,Timing Read-to-Precharge" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--4. " TFAW ,Timing Four-Activated-Window" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x58++0x3 line.long 0x00 "DMC0_MSK,DMC0 Mask (Mode Register Shadow) Register" bitfld.long 0x00 11. " EMR3 ,Shadow EMR3 Unmask" "0,1" bitfld.long 0x00 10. " MR2 ,Shadow MR2 Unmask" "0,1" bitfld.long 0x00 9. " MR1 ,Shadow MR1 Unmask" "0,1" bitfld.long 0x00 8. " MR ,Shadow MR Unmask" "0,1" group.long 0x5C++0x3 line.long 0x00 "DMC0_MR,DMC0 Shadow MR0 Register (DDR3)" bitfld.long 0x00 12. " PD ,Active Power Down Mode" "0,1" bitfld.long 0x00 9.--11. " WRRECOV ,Write Recovery" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8. " DLLRST ,DLL Reset" "0,1" bitfld.long 0x00 4.--6. " CL ,CAS Latency" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 2. " CL0 ,CAS Latency 0" "0,1" bitfld.long 0x00 0.--1. " BLEN ,Burst Length" "0,1,2,3" group.long 0x60++0x3 line.long 0x00 "DMC0_EMR1,DMC0 Shadow EMR1 DDR2 Register" bitfld.long 0x00 12. " QOFF ,Output Buffer Enable" "0,1" bitfld.long 0x00 10. " DQS ,LDQS/UDQS Enable" "0,1" bitfld.long 0x00 6. " RTT1 ,RTT Termination Resistance 1" "0,1" bitfld.long 0x00 3.--5. " AL ,Additive Latency" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 2. " RTT0 ,Termination Resistance 0" "0,1" bitfld.long 0x00 1. " DIC ,Output Driver Impedance Control" "0,1" bitfld.long 0x00 0. " DLLEN ,DLL Enable" "0,1" group.long 0x60++0x3 line.long 0x00 "DMC0_MR1,DMC0 Shadow MR1 Register (DDR3)" bitfld.long 0x00 12. " QOFF ,Output Buffer Enable" "0,1" bitfld.long 0x00 11. " TDQS ,Termination Data Strobe" "0,1" bitfld.long 0x00 9. " RTT2 ,Rtt_nom" "0,1" bitfld.long 0x00 6. " RTT1 ,Rtt_nom" "0,1" newline bitfld.long 0x00 5. " DIC1 ,Output Driver Impedance Control" "0,1" bitfld.long 0x00 3.--4. " AL ,Additive Latency" "0,1,2,3" bitfld.long 0x00 2. " RTT0 ,Rtt_nom" "0,1" bitfld.long 0x00 1. " DIC0 ,Output Driver Impedance control" "0,1" newline bitfld.long 0x00 0. " DLLEN ,DLL Enable" "0,1" group.long 0x64++0x3 line.long 0x00 "DMC0_MR2,DMC0 Shadow MR2 Register (DDR3)" bitfld.long 0x00 7. " SRT ,Self Refresh Temperature Range" "0,1" bitfld.long 0x00 6. " ASR ,Auto Self Refresh" "0,1" bitfld.long 0x00 3.--5. " CWL ,CAS Write Latency" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. " PASR ,Partial Array Self refresh" "0,1,2,3,4,5,6,7" group.long 0x64++0x3 line.long 0x00 "DMC0_EMR2,DMC0 Shadow EMR2 Register (DDR2)/Shadow EMR Register (LPDDR)" bitfld.long 0x00 5.--7. " DS ,Drive Strength (LPDDR Only)" "0,1,2,3,4,5,6,7" bitfld.long 0x00 7. " SRF ,High Temperature Self-Refresh (DDR2 Mode Only)" "0,1" bitfld.long 0x00 3.--4. " TCSR ,Temperature Compensated Self-Refresh" "0,1,2,3" bitfld.long 0x00 0.--2. " PASR ,Partial Array Self-Refresh" "0,1,2,3,4,5,6,7" group.long 0x7C++0x3 line.long 0x00 "DMC0_DLLCTL,DMC0 DLL Control Register" bitfld.long 0x00 8.--11. " DATACYC ,Data Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. " DLLCALRDCNT ,DLL Calibration RD Count" group.long 0x8C++0x3 line.long 0x00 "DMC0_DT_CALIB_ADDR,DMC0 Data Calibration Address Register" group.long 0x90++0x3 line.long 0x00 "DMC0_DT_DATA_CALIB_DATA0,DMC0 Data Calibration Data 0 Register" group.long 0x94++0x3 line.long 0x00 "DMC0_DT_DATA_CALIB_DATA1,DMC0 Data Calibration Data 1 Register" group.long 0xFC++0x3 line.long 0x00 "DMC0_RDDATABUFID1,DMC0 DMC Read Data Buffer ID Register 1" group.long 0x100++0x3 line.long 0x00 "DMC0_RDDATABUFMSK1,DMC0 DMC Read Data Buffer Mask Register 1" group.long 0x104++0x3 line.long 0x00 "DMC0_RDDATABUFID2,DMC0 DMC Read Data Buffer ID Register 2" group.long 0x108++0x3 line.long 0x00 "DMC0_RDDATABUFMSK2,DMC0 DMC Read Data Buffer Mask Register 2" group.long 0x1BC++0x3 line.long 0x00 "DMC0_CPHY_CTL,DMC0 Controller to PHY Interface Register" group.long 0xFFC++0x3 line.long 0x00 "DMC0_PHY_CTL0,DMC0 PHY Control 0 Register" bitfld.long 0x00 12. " RESETDAT ,Reset Data Capture Logic" "0,1" bitfld.long 0x00 11. " RESETDLL ,Reset DLL" "0,1" group.long 0x1000++0x3 line.long 0x00 "DMC0_PHY_CTL1,DMC0 PHY Control 1 Register" bitfld.long 0x00 19. " BYPODTEN ,Bypass ODTEN for DQ and DQS" "0,1" group.long 0x1004++0x3 line.long 0x00 "DMC0_PHY_CTL2,DMC0 PHY Control 2 Register" group.long 0x1008++0x3 line.long 0x00 "DMC0_PHY_CTL3,DMC0 PHY Control 3 Register" group.long 0x100C++0x3 line.long 0x00 "DMC0_PHY_CTL4,DMC0 PHY Control 4 Register" bitfld.long 0x00 2. " CLKDIS ,Clock Disable" "0,1" bitfld.long 0x00 0.--1. " DDRMODE ,DDR Mode Select" "0,1,2,3" group.long 0x1030++0x3 line.long 0x00 "DMC0_CAL_PADCTL0,DMC0 Calibration PAD Control 0 Register" bitfld.long 0x00 31. " RTTCALEN ,RTT Calibration Enable" "0,1" bitfld.long 0x00 30. " PDCALEN ,PULLDOWN Calibration Enable" "0,1" bitfld.long 0x00 29. " PUCALEN ,PULLUP Calibration Enable" "0,1" bitfld.long 0x00 28. " CALSTRT ,Start New Calibration ( Hardware Cleared)" "0,1" group.long 0x1038++0x3 line.long 0x00 "DMC0_CAL_PADCTL2,DMC0 Calibration PAD Control 2 Register" hexmask.long.byte 0x00 16.--23. 1. " IMPRTT ,Impedance RTT Value" hexmask.long.byte 0x00 8.--15. 1. " IMPWRDQ ,Impedance for DQ" hexmask.long.byte 0x00 0.--7. 1. " IMPWRAD ,Impedance for ADDR_CMD PADS" tree.end sif !cpuis("ADSP-SC584")&&!cpuis("ADSP-SC584W") tree "DMC1" base ad:0x31073004 width 26. group.long 0x0++0x3 line.long 0x00 "DMC1_CTL,DMC1 Control Register" bitfld.long 0x00 25. " ZQCL ,ZQ Calibration Long" "0,1" bitfld.long 0x00 24. " ZQCS ,ZQ Calibration Short" "0,1" bitfld.long 0x00 13. " DLLCAL ,DLL Calibration Start" "0,1" bitfld.long 0x00 12. " PPREF ,Postpone Refresh" "0,1" newline bitfld.long 0x00 9.--11. " RDTOWR ,Read-to-Write Cycle" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8. " ADDRMODE ,Addressing (Page/Bank) Mode" "0,1" bitfld.long 0x00 7. " RESET ,Reset SDRAM" "0,1" bitfld.long 0x00 6. " PREC ,Precharge" "0,1" newline bitfld.long 0x00 5. " DPDREQ ,Deep Power-Down Request" "0,1" bitfld.long 0x00 4. " PDREQ ,Power Down Request" "0,1" bitfld.long 0x00 3. " SRREQ ,Self-Refresh Request" "0,1" bitfld.long 0x00 2. " INIT ,Initialize DRAM Start" "0,1" newline bitfld.long 0x00 1. " LPDDR ,Low Power DDR Mode" "0,1" bitfld.long 0x00 0. " DDR3EN ,DDR3 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "DMC1_STAT,DMC1 Status Register" bitfld.long 0x00 25. " ZQCLDONE ,ZQ Calibration Long Done" "0,1" bitfld.long 0x00 24. " ZQCSDONE ,ZQ Calibration Short Done" "0,1" bitfld.long 0x00 20.--23. " PHYRDPHASE ,PHY Read Phase" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " PENDREF ,Pending Refresh" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 13. " DLLCALDONE ,DLL Calibration Done" "0,1" bitfld.long 0x00 7. " RESETDONE ,Reset Done" "0,1" bitfld.long 0x00 5. " DPDACK ,Deep Power-Down Acknowledge" "0,1" bitfld.long 0x00 4. " PDACK ,Power-Down Acknowledge" "0,1" newline bitfld.long 0x00 3. " SRACK ,Self-Refresh Acknowledge" "0,1" bitfld.long 0x00 2. " INITDONE ,Initialization Done" "0,1" bitfld.long 0x00 0. " IDLE ,Idle State" "0,1" group.long 0x8++0x3 line.long 0x00 "DMC1_EFFCTL,DMC1 Efficiency Control Register" bitfld.long 0x00 20.--23. " IDLECYC ,Idle Cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " NUMREF ,Number of Refresh Commands" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 15. " PRECBANK7 ,Precharge Bank 7" "0,1" bitfld.long 0x00 14. " PRECBANK6 ,Precharge Bank 6" "0,1" newline bitfld.long 0x00 13. " PRECBANK5 ,Precharge Bank 5" "0,1" bitfld.long 0x00 12. " PRECBANK4 ,Precharge Bank 4" "0,1" bitfld.long 0x00 11. " PRECBANK3 ,Precharge Bank 3" "0,1" bitfld.long 0x00 10. " PRECBANK2 ,Precharge Bank 2" "0,1" newline bitfld.long 0x00 9. " PRECBANK1 ,Precharge Bank 1" "0,1" bitfld.long 0x00 8. " PRECBANK0 ,Precharge Bank 0" "0,1" group.long 0xC++0x3 line.long 0x00 "DMC1_PRIO,DMC1 Priority ID Register 1" group.long 0x10++0x3 line.long 0x00 "DMC1_PRIOMSK,DMC1 Priority ID Mask Register 1" group.long 0x14++0x3 line.long 0x00 "DMC1_PRIO2,DMC1 Priority ID Register 2" group.long 0x18++0x3 line.long 0x00 "DMC1_PRIOMSK2,DMC1 Priority ID Mask Register 2" group.long 0x3C++0x3 line.long 0x00 "DMC1_CFG,DMC1 Configuration Register" bitfld.long 0x00 12.--15. " EXTBANK ,External Banks" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " SDRSIZE ,SDRAM Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4.--7. " SDRWID ,SDRAM Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " IFWID ,Interface Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40++0x3 line.long 0x00 "DMC1_TR0,DMC1 Timing 0 Register" bitfld.long 0x00 28.--31. " TMRD ,Timing Mode Register Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 20.--25. " TRC ,Timing Row Cycle" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 12.--16. " TRAS ,Timing Row Active Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 8.--11. " TRP ,Timing RAS Precharge" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--7. " TWTR ,Timing Write to Read" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " TRCD ,Timing RAS to CAS Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x44++0x3 line.long 0x00 "DMC1_TR1,DMC1 Timing 1 Register" bitfld.long 0x00 28.--30. " TRRD ,Timing Read-Read Delay" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 16.--23. 1. " TRFC ,Timing Refresh-to-Command" hexmask.long.word 0x00 0.--13. 1. " TREF ,Timing Refresh Interval" group.long 0x48++0x3 line.long 0x00 "DMC1_TR2,DMC1 Timing 2 Register" bitfld.long 0x00 20.--23. " TCKE ,Timing Clock Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " TXP ,Timing Exit Power Down" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--15. " TWR ,Timing Write Recovery" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " TRTP ,Timing Read-to-Precharge" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 0.--4. " TFAW ,Timing Four-Activated-Window" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x58++0x3 line.long 0x00 "DMC1_MSK,DMC1 Mask (Mode Register Shadow) Register" bitfld.long 0x00 11. " EMR3 ,Shadow EMR3 Unmask" "0,1" bitfld.long 0x00 10. " MR2 ,Shadow MR2 Unmask" "0,1" bitfld.long 0x00 9. " MR1 ,Shadow MR1 Unmask" "0,1" bitfld.long 0x00 8. " MR ,Shadow MR Unmask" "0,1" group.long 0x5C++0x3 line.long 0x00 "DMC1_MR,DMC1 Shadow MR0 Register (DDR3)" bitfld.long 0x00 12. " PD ,Active Power Down Mode" "0,1" bitfld.long 0x00 9.--11. " WRRECOV ,Write Recovery" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8. " DLLRST ,DLL Reset" "0,1" bitfld.long 0x00 4.--6. " CL ,CAS Latency" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 2. " CL0 ,CAS Latency 0" "0,1" bitfld.long 0x00 0.--1. " BLEN ,Burst Length" "0,1,2,3" group.long 0x60++0x3 line.long 0x00 "DMC1_EMR1,DMC1 Shadow EMR1 DDR2 Register" bitfld.long 0x00 12. " QOFF ,Output Buffer Enable" "0,1" bitfld.long 0x00 10. " DQS ,LDQS/UDQS Enable" "0,1" bitfld.long 0x00 6. " RTT1 ,RTT Termination Resistance 1" "0,1" bitfld.long 0x00 3.--5. " AL ,Additive Latency" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 2. " RTT0 ,Termination Resistance 0" "0,1" bitfld.long 0x00 1. " DIC ,Output Driver Impedance Control" "0,1" bitfld.long 0x00 0. " DLLEN ,DLL Enable" "0,1" group.long 0x60++0x3 line.long 0x00 "DMC1_MR1,DMC1 Shadow MR1 Register (DDR3)" bitfld.long 0x00 12. " QOFF ,Output Buffer Enable" "0,1" bitfld.long 0x00 11. " TDQS ,Termination Data Strobe" "0,1" bitfld.long 0x00 9. " RTT2 ,Rtt_nom" "0,1" bitfld.long 0x00 6. " RTT1 ,Rtt_nom" "0,1" newline bitfld.long 0x00 5. " DIC1 ,Output Driver Impedance Control" "0,1" bitfld.long 0x00 3.--4. " AL ,Additive Latency" "0,1,2,3" bitfld.long 0x00 2. " RTT0 ,Rtt_nom" "0,1" bitfld.long 0x00 1. " DIC0 ,Output Driver Impedance control" "0,1" newline bitfld.long 0x00 0. " DLLEN ,DLL Enable" "0,1" group.long 0x64++0x3 line.long 0x00 "DMC1_MR2,DMC1 Shadow MR2 Register (DDR3)" bitfld.long 0x00 7. " SRT ,Self Refresh Temperature Range" "0,1" bitfld.long 0x00 6. " ASR ,Auto Self Refresh" "0,1" bitfld.long 0x00 3.--5. " CWL ,CAS Write Latency" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. " PASR ,Partial Array Self refresh" "0,1,2,3,4,5,6,7" group.long 0x64++0x3 line.long 0x00 "DMC1_EMR2,DMC1 Shadow EMR2 Register (DDR2)/Shadow EMR Register (LPDDR)" bitfld.long 0x00 5.--7. " DS ,Drive Strength (LPDDR Only)" "0,1,2,3,4,5,6,7" bitfld.long 0x00 7. " SRF ,High Temperature Self-Refresh (DDR2 Mode Only)" "0,1" bitfld.long 0x00 3.--4. " TCSR ,Temperature Compensated Self-Refresh" "0,1,2,3" bitfld.long 0x00 0.--2. " PASR ,Partial Array Self-Refresh" "0,1,2,3,4,5,6,7" group.long 0x7C++0x3 line.long 0x00 "DMC1_DLLCTL,DMC1 DLL Control Register" bitfld.long 0x00 8.--11. " DATACYC ,Data Cycles" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. " DLLCALRDCNT ,DLL Calibration RD Count" group.long 0x8C++0x3 line.long 0x00 "DMC1_DT_CALIB_ADDR,DMC1 Data Calibration Address Register" group.long 0x90++0x3 line.long 0x00 "DMC1_DT_DATA_CALIB_DATA0,DMC1 Data Calibration Data 0 Register" group.long 0x94++0x3 line.long 0x00 "DMC1_DT_DATA_CALIB_DATA1,DMC1 Data Calibration Data 1 Register" group.long 0xFC++0x3 line.long 0x00 "DMC1_RDDATABUFID1,DMC1 DMC Read Data Buffer ID Register 1" group.long 0x100++0x3 line.long 0x00 "DMC1_RDDATABUFMSK1,DMC1 DMC Read Data Buffer Mask Register 1" group.long 0x104++0x3 line.long 0x00 "DMC1_RDDATABUFID2,DMC1 DMC Read Data Buffer ID Register 2" group.long 0x108++0x3 line.long 0x00 "DMC1_RDDATABUFMSK2,DMC1 DMC Read Data Buffer Mask Register 2" group.long 0x1BC++0x3 line.long 0x00 "DMC1_CPHY_CTL,DMC1 Controller to PHY Interface Register" group.long 0xFFC++0x3 line.long 0x00 "DMC1_PHY_CTL0,DMC1 PHY Control 0 Register" bitfld.long 0x00 12. " RESETDAT ,Reset Data Capture Logic" "0,1" bitfld.long 0x00 11. " RESETDLL ,Reset DLL" "0,1" group.long 0x1000++0x3 line.long 0x00 "DMC1_PHY_CTL1,DMC1 PHY Control 1 Register" bitfld.long 0x00 19. " BYPODTEN ,Bypass ODTEN for DQ and DQS" "0,1" group.long 0x1004++0x3 line.long 0x00 "DMC1_PHY_CTL2,DMC1 PHY Control 2 Register" group.long 0x1008++0x3 line.long 0x00 "DMC1_PHY_CTL3,DMC1 PHY Control 3 Register" group.long 0x100C++0x3 line.long 0x00 "DMC1_PHY_CTL4,DMC1 PHY Control 4 Register" bitfld.long 0x00 2. " CLKDIS ,Clock Disable" "0,1" bitfld.long 0x00 0.--1. " DDRMODE ,DDR Mode Select" "0,1,2,3" group.long 0x1030++0x3 line.long 0x00 "DMC1_CAL_PADCTL0,DMC1 Calibration PAD Control 0 Register" bitfld.long 0x00 31. " RTTCALEN ,RTT Calibration Enable" "0,1" bitfld.long 0x00 30. " PDCALEN ,PULLDOWN Calibration Enable" "0,1" bitfld.long 0x00 29. " PUCALEN ,PULLUP Calibration Enable" "0,1" bitfld.long 0x00 28. " CALSTRT ,Start New Calibration ( Hardware Cleared)" "0,1" group.long 0x1038++0x3 line.long 0x00 "DMC1_CAL_PADCTL2,DMC1 Calibration PAD Control 2 Register" hexmask.long.byte 0x00 16.--23. 1. " IMPRTT ,Impedance RTT Value" hexmask.long.byte 0x00 8.--15. 1. " IMPWRDQ ,Impedance for DQ" hexmask.long.byte 0x00 0.--7. 1. " IMPWRAD ,Impedance for ADDR_CMD PADS" tree.end endif tree.end tree "DPM (Dynamic Power Management)" base ad:0x31090000 width 15. group.long 0x0++0x3 line.long 0x00 "DPM0_CTL,DPM0 Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" group.long 0x4++0x3 line.long 0x00 "DPM0_STAT,DPM0 Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADDRERR ,Address Error" "0,1" bitfld.long 0x00 4.--7. " PRVMODE ,Previous Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " CURMODE ,Current Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x70++0x3 line.long 0x00 "DPM0_PER_DIS0,DPM0 Peripherals Disable Register 0" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" hexmask.long 0x00 0.--30. 1. " VALUE ,Peripheral Disable" group.long 0x74++0x3 line.long 0x00 "DPM0_PER_DIS1,DPM0 Peripherals Disable Register 1" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" hexmask.long.tbyte 0x00 0.--18. 1. " VALUE ,Peripheral Disable" group.long 0x84++0x3 line.long 0x00 "DPM0_REVID,DPM0 Revision ID" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree "EMAC (Ethernet Media Access Controller)" tree "EMAC0" base ad:0x3100C000 width 26. group.long 0x0++0x3 line.long 0x00 "EMAC0_MACCFG,EMAC0 MAC Configuration Register" bitfld.long 0x00 28.--30. " SARC ,Source Address Insertion or Replacement Control" "0,1,2,3,4,5,6,7" bitfld.long 0x00 27. " TWOKPE ,Support for 2K packets" "0,1" bitfld.long 0x00 25. " CST ,CRC Stripping" "0,1" bitfld.long 0x00 24. " TC ,Transmit Configuration in RGMII, SGMII or SMII" "0,1" newline bitfld.long 0x00 23. " WD ,Watch Dog Disable" "0,1" bitfld.long 0x00 22. " JB ,Jabber Disable" "0,1" bitfld.long 0x00 21. " BE ,Frame Burst Enable" "0,1" bitfld.long 0x00 20. " JE ,Jumbo Frame Enable" "0,1" newline bitfld.long 0x00 17.--19. " IFG ,Inter-Frame Gap" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16. " DCRS ,Disable Carrier Sense" "0,1" bitfld.long 0x00 15. " PS ,Port Select" "0,1" bitfld.long 0x00 14. " FES ,Speed of Operation" "0,1" newline bitfld.long 0x00 13. " DO ,Disable Receive Own" "0,1" bitfld.long 0x00 12. " LM ,Loopback Mode" "0,1" bitfld.long 0x00 11. " DM ,Duplex Mode" "0,1" bitfld.long 0x00 10. " IPC ,IP Checksum" "0,1" newline bitfld.long 0x00 9. " DR ,Disable Retry" "0,1" bitfld.long 0x00 8. " LUD ,Link Up or Down" "0,1" bitfld.long 0x00 7. " ACS ,Automatic Pad/CRC Stripping" "0,1" bitfld.long 0x00 5.--6. " BL ,Back Off Limit" "0,1,2,3" newline bitfld.long 0x00 4. " DC ,Deferral Check" "0,1" bitfld.long 0x00 3. " TE ,Transmitter Enable" "0,1" bitfld.long 0x00 2. " RE ,Receiver Enable" "0,1" bitfld.long 0x00 0.--1. " PRELEN ,Preamble Length for Transmit Frames" "0,1,2,3" group.long 0x4++0x3 line.long 0x00 "EMAC0_MACFRMFILT,EMAC0 MAC Rx Frame Filter Register" bitfld.long 0x00 31. " RA ,Receive All Frames" "0,1" bitfld.long 0x00 21. " DNTU ,Drop non-TCP/UDP over IP Frames" "0,1" bitfld.long 0x00 20. " IPFE ,Layer 3 and Layer 4 Filter Enable" "0,1" bitfld.long 0x00 16. " VTFE ,VAN Tag Filter Enable" "0,1" newline bitfld.long 0x00 10. " HPF ,Hash or Perfect Filter" "0,1" bitfld.long 0x00 9. " SAF ,Source Address Filter Enable" "0,1" bitfld.long 0x00 8. " SAIF ,Source Address Inverse Filtering" "0,1" bitfld.long 0x00 6.--7. " PCF ,Pass Control Frames" "0,1,2,3" newline bitfld.long 0x00 5. " DBF ,Disable Broadcast Frames" "0,1" bitfld.long 0x00 4. " PM ,Pass All Multicast Frames" "0,1" bitfld.long 0x00 3. " DAIF ,Destination Address Inverse Filtering" "0,1" bitfld.long 0x00 2. " HMC ,Hash Multicast" "0,1" newline bitfld.long 0x00 1. " HUC ,Hash Unicast" "0,1" bitfld.long 0x00 0. " PR ,Promiscuous Mode" "0,1" group.long 0x8++0x3 line.long 0x00 "EMAC0_HASHTBL_HI,EMAC0 Hash Table High Register" group.long 0xC++0x3 line.long 0x00 "EMAC0_HASHTBL_LO,EMAC0 Hash Table Low Register" group.long 0x10++0x3 line.long 0x00 "EMAC0_SMI_ADDR,EMAC0 SMI Address Register" bitfld.long 0x00 11.--15. " PA ,Physical Layer Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6.--10. " SMIR ,SMI Register Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 2.--5. " CR ,Clock Range" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. " SMIW ,SMI Write" "0,1" newline bitfld.long 0x00 0. " SMIB ,SMI Busy" "0,1" group.long 0x14++0x3 line.long 0x00 "EMAC0_SMI_DATA,EMAC0 SMI Data Register" hexmask.long.word 0x00 0.--15. 1. " SMID ,SMI Data" group.long 0x18++0x3 line.long 0x00 "EMAC0_FLOWCTL,EMAC0 FLow Control Register" hexmask.long.word 0x00 16.--31. 1. " PT ,Pause Time" bitfld.long 0x00 7. " DZPQ ,Disable Zero-Quanta Pause" "0,1" bitfld.long 0x00 4.--5. " PLT ,Pause Low Threshold" "0,1,2,3" bitfld.long 0x00 3. " UP ,Unicast Pause Frame Detect" "0,1" newline bitfld.long 0x00 2. " RFE ,Receive Flow Control Enable" "0,1" bitfld.long 0x00 1. " TFE ,Transmit Flow Control Enable" "0,1" bitfld.long 0x00 0. " FCBBPA ,Initiate Pause Control Frame" "0,1" group.long 0x1C++0x3 line.long 0x00 "EMAC0_VLANTAG,EMAC0 VLAN Tag Register" bitfld.long 0x00 19. " VTHM ,VLAN Tag Hash Table Match Enable" "0,1" bitfld.long 0x00 18. " ESVL ,Enable S-VLAN" "0,1" bitfld.long 0x00 17. " VTIM ,VLAN Tag Inverse Match Enable" "0,1" bitfld.long 0x00 16. " ETV ,Enable Tag VLAN Comparison" "0,1" newline hexmask.long.word 0x00 0.--15. 1. " VL ,VLAN Tag Id Receive Frames" group.long 0x24++0x3 line.long 0x00 "EMAC0_DBG,EMAC0 Debug Register" bitfld.long 0x00 25. " TXFIFOFULL ,Tx FIFO Full" "0,1" bitfld.long 0x00 24. " TXFIFONE ,Tx FIFO Not Empty" "0,1" bitfld.long 0x00 22. " TXFIFOACT ,Tx FIFO Active" "0,1" bitfld.long 0x00 20.--21. " TXFIFOCTLST ,Tx FIFO Controller State" "0,1,2,3" newline bitfld.long 0x00 19. " TXPAUSE ,Tx Paused" "0,1" bitfld.long 0x00 17.--18. " TXFRCTL ,Tx Frame Controller State" "0,1,2,3" bitfld.long 0x00 16. " MMTEA ,MM Tx Engine Active" "0,1" bitfld.long 0x00 8.--9. " RXFIFOST ,Rx FIFO State" "0,1,2,3" newline bitfld.long 0x00 5.--6. " RXFIFOCTLST ,Rx FIFO Controller State" "0,1,2,3" bitfld.long 0x00 4. " RXFIFOACT ,Rx FIFO Active" "0,1" bitfld.long 0x00 1.--2. " SFIFOST ,Small FIFO State" "0,1,2,3" bitfld.long 0x00 0. " MMREA ,MM Rx Engine Active" "0,1" group.long 0x30++0x3 line.long 0x00 "EMAC0_LPI_CTLSTAT,EMAC0 Low Power Idle Control and Status Register" bitfld.long 0x00 19. " LPITXA ,LPI Mode Transmit Behavior" "0,1" bitfld.long 0x00 18. " PLSEN ,LPI Link Status Enable" "0,1" bitfld.long 0x00 17. " PLS ,PHY Link Status" "0,1" bitfld.long 0x00 16. " LPIEN ,LPI Enable" "0,1" newline bitfld.long 0x00 9. " RLPIST ,Receive LPI Status" "0,1" bitfld.long 0x00 8. " TLPIST ,Transmit LPI Status" "0,1" bitfld.long 0x00 3. " RLPIEX ,Receiver LPI State Exit Status" "0,1" bitfld.long 0x00 2. " RLPIEN ,Receiver LPI State Enable Status" "0,1" newline bitfld.long 0x00 1. " TLPIEX ,Transmitter LPI State Exit Status" "0,1" bitfld.long 0x00 0. " TLPIEN ,Transmitter LPI State Enable Status" "0,1" group.long 0x34++0x3 line.long 0x00 "EMAC0_LPI_TMRSCTL,EMAC0 Low Power Idle Timeout Register" hexmask.long.word 0x00 16.--25. 1. " LST ,Link Status Timer" hexmask.long.word 0x00 0.--15. 1. " TWT ,Timer Wait Time" group.long 0x38++0x3 line.long 0x00 "EMAC0_ISTAT,EMAC0 Interrupt Status Register" bitfld.long 0x00 10. " LPIIS ,LPI Interrupt Status" "0,1" bitfld.long 0x00 9. " TS ,Time Stamp Interrupt Status" "0,1" bitfld.long 0x00 7. " MMCRC ,MMC Receive Checksum Offload Interrupt Status" "0,1" bitfld.long 0x00 6. " MMCTX ,MMC Transmit Interrupt Status" "0,1" newline bitfld.long 0x00 5. " MMCRX ,MMC Receive Interrupt Status" "0,1" bitfld.long 0x00 4. " MMC ,MMC Interrupt Status" "0,1" bitfld.long 0x00 0. " RGMIIIS ,RGMII or SMII Interrupt Status" "0,1" group.long 0x3C++0x3 line.long 0x00 "EMAC0_IMSK,EMAC0 Interrupt Mask Register" bitfld.long 0x00 10. " LPIIM ,LPI Interrupt Mask" "0,1" bitfld.long 0x00 9. " TS ,Time Stamp Interrupt Mask" "0,1" bitfld.long 0x00 0. " RGMIIIM ,RGMII or SMII Interrupt Mask" "0,1" group.long 0x40++0x3 line.long 0x00 "EMAC0_ADDR0_HI,EMAC0 MAC Address 0 High Register" hexmask.long.word 0x00 0.--15. 1. " ADDR ,Address" group.long 0x44++0x3 line.long 0x00 "EMAC0_ADDR0_LO,EMAC0 MAC Address 0 Low Register" group.long 0x48++0x3 line.long 0x00 "EMAC0_ADDR1_HI,EMAC0 MAC Address 1 High Register" bitfld.long 0x00 31. " AE ,Address Enable" "0,1" bitfld.long 0x00 30. " SA ,Source Address" "0,1" bitfld.long 0x00 24.--29. " MBC ,Mask byte control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 0.--15. 1. " ADDRHI ,Mac address" group.long 0x4C++0x3 line.long 0x00 "EMAC0_ADDR1_LO,EMAC0 MAC Address 1 Low Register" group.long 0xD8++0x3 line.long 0x00 "EMAC0_GIGE_CTLSTAT,EMAC0 RGMII Control and Status Register" bitfld.long 0x00 3. " LNKSTS ,Link Status" "0,1" bitfld.long 0x00 1.--2. " LNKSPEED ,Link Speed" "0,1,2,3" bitfld.long 0x00 0. " LNKMOD ,Link Mode" "0,1" group.long 0xDC++0x3 line.long 0x00 "EMAC0_WDOG_TIMOUT,EMAC0 Watchdog Timeout Register" bitfld.long 0x00 16. " PWE ,Programmable Watchdog Enable" "0,1" hexmask.long.word 0x00 0.--13. 1. " WTO ,Watchdog Timeout" group.long 0x100++0x3 line.long 0x00 "EMAC0_MMC_CTL,EMAC0 MMC Control Register" bitfld.long 0x00 5. " FULLPSET ,Full Preset" "0,1" bitfld.long 0x00 4. " CNTRPSET ,Counter Reset/Preset" "0,1" bitfld.long 0x00 3. " CNTRFRZ ,Counter Freeze" "0,1" bitfld.long 0x00 2. " RDRST ,Read Reset" "0,1" newline bitfld.long 0x00 1. " NOROLL ,No Rollover" "0,1" bitfld.long 0x00 0. " RST ,Reset" "0,1" group.long 0x104++0x3 line.long 0x00 "EMAC0_MMC_RXINT,EMAC0 MMC Rx Interrupt Register" bitfld.long 0x00 25. " RXCTLFIS ,Rx Control Frame Counter Interrupt Status" "0,1" bitfld.long 0x00 24. " RXRCVERRFIS ,Rx Error Frame Counter Interrupt Status" "0,1" bitfld.long 0x00 23. " WDOGERR ,Rx Watch Dog Error Count Half/Full" "0,1" bitfld.long 0x00 22. " VLANFRGB ,Rx VLAN Frames (Good/Bad) Count Half/Full" "0,1" newline bitfld.long 0x00 21. " FIFOOVF ,Rx FIFO Overflow Count Half/Full" "0,1" bitfld.long 0x00 20. " PAUSEFR ,Rx Pause Frames Count Half/Full" "0,1" bitfld.long 0x00 19. " OUTRANGE ,Rx Out Of Range Type Count Half/Full" "0,1" bitfld.long 0x00 18. " LENERR ,Rx Length Error Count Half/Full" "0,1" newline bitfld.long 0x00 17. " UCASTG ,Rx Unicast Frames (Good) Count Half/Full" "0,1" bitfld.long 0x00 16. " R1024TOMAX ,Rx 1024-to-max Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 15. " R512TO1023 ,Rx 512-to-1023 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 14. " R256TO511 ,Rx 255-to-511 Octets (Good/Bad) Count Half/Full" "0,1" newline bitfld.long 0x00 13. " R128TO255 ,Rx 128-to-255 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 12. " R65TO127 ,Rx 65-to-127 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 11. " R64 ,Rx 64 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 10. " OSIZEG ,Rx Oversize (Good) Count Half/Full" "0,1" newline bitfld.long 0x00 9. " USIZEG ,Rx Undersize (Good) Count Half/Full" "0,1" bitfld.long 0x00 8. " JABERR ,Rx Jabber Error Count Half/Full" "0,1" bitfld.long 0x00 7. " RUNTERR ,Rx Runt Error Count Half/Full" "0,1" bitfld.long 0x00 6. " ALIGNERR ,Rx Alignment Error Count Half/Full" "0,1" newline bitfld.long 0x00 5. " CRCERR ,Rx CRC Error Counter Half/Full" "0,1" bitfld.long 0x00 4. " MCASTG ,Rx Multicast Count (Good) Half/Full" "0,1" bitfld.long 0x00 3. " BCASTG ,Rx Broadcast Count (Good) Half/Full" "0,1" bitfld.long 0x00 2. " OCTCNTG ,Octet Count (Good) Half/Full" "0,1" newline bitfld.long 0x00 1. " OCTCNTGB ,Octet Count (Good/Bad) Half/Full" "0,1" bitfld.long 0x00 0. " FRCNTGB ,Frame Count (Good/Bad) Half/Full" "0,1" group.long 0x108++0x3 line.long 0x00 "EMAC0_MMC_TXINT,EMAC0 MMC Tx Interrupt Register" bitfld.long 0x00 25. " TXOSIZEGFIS ,Tx Oversize Good Frame Count Interrupt Status" "0,1" bitfld.long 0x00 24. " VLANFRGB ,Tx VLAN Frames (Good) Count Half/Full" "0,1" bitfld.long 0x00 23. " PAUSEFRM ,Tx Pause Frames Count Half/Full" "0,1" bitfld.long 0x00 22. " EXCESSDEF ,Tx Excess Deferred Count Half/Full" "0,1" newline bitfld.long 0x00 21. " FRCNTG ,Tx Frame Count (Good) Count Half/Full" "0,1" bitfld.long 0x00 20. " OCTCNTG ,Tx Octet Count (Good) Count Half/Full" "0,1" bitfld.long 0x00 19. " CARRERR ,Tx Carrier Error Count Half/Full" "0,1" bitfld.long 0x00 18. " EXCESSCOL ,Tx Excess Collision Count Half/Full" "0,1" newline bitfld.long 0x00 17. " LATECOL ,Tx Late Collision Count Half/Full" "0,1" bitfld.long 0x00 16. " DEFERRED ,Tx Deferred Count Half/Full" "0,1" bitfld.long 0x00 15. " MULTCOLG ,Tx Multiple collision (Good) Count Half/Full" "0,1" bitfld.long 0x00 14. " SNGCOLG ,Tx Single Collision (Good) Count Half/Full" "0,1" newline bitfld.long 0x00 13. " UNDERR ,Tx Underflow Error Count Half/Full" "0,1" bitfld.long 0x00 12. " BCASTGB ,Tx Broadcast Frames (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 11. " MCASTGB ,Tx Multicast Frames (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 10. " UCASTGB ,Tx Unicast Frames (Good/Bad) Count Half/Full" "0,1" newline bitfld.long 0x00 9. " T1024TOMAX ,Tx 1024-to-max Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 8. " T512TO1023 ,Tx 512-to-1023 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 7. " T256TO511 ,Tx 256-to-511 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 6. " T128TO255 ,Tx 128-to-255 Octets (Good/Bad) Count Half/Full" "0,1" newline bitfld.long 0x00 5. " T65TO127 ,Tx 65-to-127 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 4. " T64 ,Tx 64 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 3. " MCASTG ,Tx Multicast Frames (Good) Count Half/Full" "0,1" bitfld.long 0x00 2. " BCASTG ,Tx Broadcast Frames (Good) Count Half/Full" "0,1" newline bitfld.long 0x00 1. " FRCNTGB ,Tx Frame Count (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 0. " OCTCNTGB ,Tx Octet Count (Good/Bad) Count Half/Full" "0,1" group.long 0x10C++0x3 line.long 0x00 "EMAC0_MMC_RXIMSK,EMAC0 MMC Rx Interrupt Mask Register" bitfld.long 0x00 25. " CTLFIM ,Rx Control Frame Counter Interrupt Mask" "0,1" bitfld.long 0x00 24. " RCVERRFIM ,Rx Error Frame Counter Interrupt Mask" "0,1" bitfld.long 0x00 23. " WATCHERR ,Rx Watch Dog Error Count Half/Full Mask" "0,1" bitfld.long 0x00 22. " VLANFRGB ,Rx VLAN Frames (Good/Bad) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 21. " FIFOOV ,Rx FIFO Overflow Count Half/Full Mask" "0,1" bitfld.long 0x00 20. " PAUSEFRM ,Rx Pause Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 19. " OUTRANGE ,Rx Out Of Range Type Count Half/Full Mask" "0,1" bitfld.long 0x00 18. " LENERR ,Rx Length Error Count Half/Full Mask" "0,1" newline bitfld.long 0x00 17. " UCASTG ,Rx Unicast Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 16. " R1024TOMAX ,Rx 1024-to-max Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 15. " R512TO1023 ,Rx 512-to-1023 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 14. " R256TO511 ,Rx 255-to-511 Octets (Good/Bad) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 13. " R128TO255 ,Rx 128-to-255 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 12. " R65TO127 ,Rx 65-to-127 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 11. " R64 ,Rx 64 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 10. " OSIZEG ,Rx Oversize (Good) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 9. " USIZEG ,Rx Undersize (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 8. " JABERR ,Rx Jabber Error Count Half/Full Mask" "0,1" bitfld.long 0x00 7. " RUNTERR ,Rx Runt Error Count Half/Full Mask" "0,1" bitfld.long 0x00 6. " ALIGNERR ,Rx Alignment Error Count Half/Full Mask" "0,1" newline bitfld.long 0x00 5. " CRCERR ,Rx CRC Error Count Half/Full Mask" "0,1" bitfld.long 0x00 4. " MCASTG ,Rx Multicast Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 3. " BCASTG ,Rx Broadcast Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 2. " OCTCNTG ,Rx Octet Count (Good) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 1. " OCTCNTGB ,Rx Octet Count (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 0. " FRCNTGB ,Rx Frame Count (Good/Bad) Count Half/Full Mask" "0,1" group.long 0x110++0x3 line.long 0x00 "EMAC0_MMC_TXIMSK,EMAC0 MMC TX Interrupt Mask Register" bitfld.long 0x00 25. " OSZGFIM ,Tx Oversize Good Frame Count Interrupt Mask" "0,1" bitfld.long 0x00 24. " VLANFRG ,Tx VLAN Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 23. " PAUSEFRM ,Tx Pause Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 22. " EXCESSDEF ,Tx Excess Deferred Count Half/Full Mask" "0,1" newline bitfld.long 0x00 21. " FRCNTG ,Tx Frame Count (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 20. " OCTCNTG ,Tx Octet Count (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 19. " CARRERR ,Tx Carrier Error Count Half/Full Mask" "0,1" bitfld.long 0x00 18. " EXCESSCOL ,Tx Excess collision Count Half/Full Mask" "0,1" newline bitfld.long 0x00 17. " LATECOL ,Tx Late Collision Count Half/Full Mask" "0,1" bitfld.long 0x00 16. " DEFERRED ,Tx Deferred Count Half/Full Mask" "0,1" bitfld.long 0x00 15. " MULTCOLG ,Tx Multiple Collisions (Good) Count Mask" "0,1" bitfld.long 0x00 14. " SNGCOLG ,Tx Single Collision (Good) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 13. " UNDERR ,Tx Underflow Error Count Half/Full Mask" "0,1" bitfld.long 0x00 12. " BCASTGB ,Tx Broadcast Frames (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 11. " MCASTGB ,Tx Multicast Frames (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 10. " UCASTGB ,Tx Unicast Frames (Good/Bad) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 9. " T1024TOMAX ,Tx 1024-to-max Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 8. " T512TO1023 ,Tx 512-to-1023 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 7. " T256TO511 ,Tx 256-to-511 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 6. " T128TO255 ,Tx 128-to-255 Octets (Good/Bad) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 5. " T65TO127 ,Tx 65-to-127 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 4. " T64 ,Tx 64 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 3. " MCASTG ,Tx Multicast Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 2. " BCASTG ,Tx Broadcast Frames (Good) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 1. " FRCNTGB ,Tx Frame Count (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 0. " OCTCNTGB ,Tx Octet Count (Good/Bad) Count Half/Full Mask" "0,1" group.long 0x114++0x3 line.long 0x00 "EMAC0_TXOCTCNT_GB,EMAC0 Tx OCT Count (Good/Bad) Register" group.long 0x118++0x3 line.long 0x00 "EMAC0_TXFRMCNT_GB,EMAC0 Tx Frame Count (Good/Bad) Register" group.long 0x11C++0x3 line.long 0x00 "EMAC0_TXBCASTFRM_G,EMAC0 Tx Broadcast Frames (Good) Register" group.long 0x120++0x3 line.long 0x00 "EMAC0_TXMCASTFRM_G,EMAC0 Tx Multicast Frames (Good) Register" group.long 0x124++0x3 line.long 0x00 "EMAC0_TX64_GB,EMAC0 Tx 64-Byte Frames (Good/Bad) Register" group.long 0x128++0x3 line.long 0x00 "EMAC0_TX65TO127_GB,EMAC0 Tx 65- to 127-Byte Frames (Good/Bad) Register" group.long 0x12C++0x3 line.long 0x00 "EMAC0_TX128TO255_GB,EMAC0 Tx 128- to 255-Byte Frames (Good/Bad) Register" group.long 0x130++0x3 line.long 0x00 "EMAC0_TX256TO511_GB,EMAC0 Tx 256- to 511-Byte Frames (Good/Bad) Register" group.long 0x134++0x3 line.long 0x00 "EMAC0_TX512TO1023_GB,EMAC0 Tx 512- to 1023-Byte Frames (Good/Bad) Register" group.long 0x138++0x3 line.long 0x00 "EMAC0_TX1024TOMAX_GB,EMAC0 Tx 1024- to Max-Byte Frames (Good/Bad) Register" group.long 0x13C++0x3 line.long 0x00 "EMAC0_TXUCASTFRM_GB,EMAC0 Tx Unicast Frames (Good/Bad) Register" group.long 0x140++0x3 line.long 0x00 "EMAC0_TXMCASTFRM_GB,EMAC0 Tx Multicast Frames (Good/Bad) Register" group.long 0x144++0x3 line.long 0x00 "EMAC0_TXBCASTFRM_GB,EMAC0 Tx Broadcast Frames (Good/Bad) Register" group.long 0x148++0x3 line.long 0x00 "EMAC0_TXUNDR_ERR,EMAC0 Tx Underflow Error Register" group.long 0x14C++0x3 line.long 0x00 "EMAC0_TXSNGCOL_G,EMAC0 Tx Single Collision (Good) Register" group.long 0x150++0x3 line.long 0x00 "EMAC0_TXMULTCOL_G,EMAC0 Tx Multiple Collision (Good) Register" group.long 0x154++0x3 line.long 0x00 "EMAC0_TXDEFERRED,EMAC0 Tx Deferred Register" group.long 0x158++0x3 line.long 0x00 "EMAC0_TXLATECOL,EMAC0 Tx Late Collision Register" group.long 0x15C++0x3 line.long 0x00 "EMAC0_TXEXCESSCOL,EMAC0 Tx Excess Collision Register" group.long 0x160++0x3 line.long 0x00 "EMAC0_TXCARR_ERR,EMAC0 Tx Carrier Error Register" group.long 0x164++0x3 line.long 0x00 "EMAC0_TXOCTCNT_G,EMAC0 Tx Octet Count (Good) Register" group.long 0x168++0x3 line.long 0x00 "EMAC0_TXFRMCNT_G,EMAC0 Tx Frame Count (Good) Register" group.long 0x16C++0x3 line.long 0x00 "EMAC0_TXEXCESSDEF,EMAC0 Tx Excess Deferral Register" group.long 0x170++0x3 line.long 0x00 "EMAC0_TXPAUSEFRM,EMAC0 Tx Pause Frame Register" group.long 0x174++0x3 line.long 0x00 "EMAC0_TXVLANFRM_G,EMAC0 Tx VLAN Frames (Good) Register" group.long 0x178++0x3 line.long 0x00 "EMAC0_TXOVRSIZE_G,EMAC0 Number of Tx Frames (Good) greater than maxsize" group.long 0x180++0x3 line.long 0x00 "EMAC0_RXFRMCNT_GB,EMAC0 Rx Frame Count (Good/Bad) Register" group.long 0x184++0x3 line.long 0x00 "EMAC0_RXOCTCNT_GB,EMAC0 Rx Octet Count (Good/Bad) Register" group.long 0x188++0x3 line.long 0x00 "EMAC0_RXOCTCNT_G,EMAC0 Rx Octet Count (Good) Register" group.long 0x18C++0x3 line.long 0x00 "EMAC0_RXBCASTFRM_G,EMAC0 Rx Broadcast Frames (Good) Register" group.long 0x190++0x3 line.long 0x00 "EMAC0_RXMCASTFRM_G,EMAC0 Rx Multicast Frames (Good) Register" group.long 0x194++0x3 line.long 0x00 "EMAC0_RXCRC_ERR,EMAC0 Rx CRC Error Register" group.long 0x198++0x3 line.long 0x00 "EMAC0_RXALIGN_ERR,EMAC0 Rx alignment Error Register" group.long 0x19C++0x3 line.long 0x00 "EMAC0_RXRUNT_ERR,EMAC0 Rx Runt Error Register" group.long 0x1A0++0x3 line.long 0x00 "EMAC0_RXJAB_ERR,EMAC0 Rx Jab Error Register" group.long 0x1A4++0x3 line.long 0x00 "EMAC0_RXUSIZE_G,EMAC0 Rx Undersize (Good) Register" group.long 0x1A8++0x3 line.long 0x00 "EMAC0_RXOSIZE_G,EMAC0 Rx Oversize (Good) Register" group.long 0x1AC++0x3 line.long 0x00 "EMAC0_RX64_GB,EMAC0 Rx 64-Byte Frames (Good/Bad) Register" group.long 0x1B0++0x3 line.long 0x00 "EMAC0_RX65TO127_GB,EMAC0 Rx 65- to 127-Byte Frames (Good/Bad) Register" group.long 0x1B4++0x3 line.long 0x00 "EMAC0_RX128TO255_GB,EMAC0 Rx 128- to 255-Byte Frames (Good/Bad) Register" group.long 0x1B8++0x3 line.long 0x00 "EMAC0_RX256TO511_GB,EMAC0 Rx 256- to 511-Byte Frames (Good/Bad) Register" group.long 0x1BC++0x3 line.long 0x00 "EMAC0_RX512TO1023_GB,EMAC0 Rx 512- to 1023-Byte Frames (Good/Bad) Register" group.long 0x1C0++0x3 line.long 0x00 "EMAC0_RX1024TOMAX_GB,EMAC0 Rx 1024- to Max-Byte Frames (Good/Bad) Register" group.long 0x1C4++0x3 line.long 0x00 "EMAC0_RXUCASTFRM_G,EMAC0 Rx Unicast Frames (Good) Register" group.long 0x1C8++0x3 line.long 0x00 "EMAC0_RXLEN_ERR,EMAC0 Rx Length Error Register" group.long 0x1CC++0x3 line.long 0x00 "EMAC0_RXOORTYPE,EMAC0 Rx Out Of Range Type Register" group.long 0x1D0++0x3 line.long 0x00 "EMAC0_RXPAUSEFRM,EMAC0 Rx Pause Frames Register" group.long 0x1D4++0x3 line.long 0x00 "EMAC0_RXFIFO_OVF,EMAC0 Rx FIFO Overflow Register" group.long 0x1D8++0x3 line.long 0x00 "EMAC0_RXVLANFRM_GB,EMAC0 Rx VLAN Frames (Good/Bad) Register" group.long 0x1DC++0x3 line.long 0x00 "EMAC0_RXWDOG_ERR,EMAC0 Rx Watch Dog Error Register" group.long 0x1E0++0x3 line.long 0x00 "EMAC0_RXRCV_ERR,EMAC0 Rx Error Frames Received Register" group.long 0x1E4++0x3 line.long 0x00 "EMAC0_RXCTLFRM_G,EMAC0 Rx Good Control Frames Register" group.long 0x200++0x3 line.long 0x00 "EMAC0_IPC_RXIMSK,EMAC0 MMC IPC Rx Interrupt Mask Register" bitfld.long 0x00 29. " ICMPERROCT ,Rx ICMP Error Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 28. " ICMPGOCT ,Rx ICMP (Good) Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 27. " TCPERROCT ,Rx TCP Error Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 26. " TCPGOCT ,Rx TCP (Good) Octets Count Half/Full Mask" "0,1" newline bitfld.long 0x00 25. " UDPERROCT ,Rx UDP Error Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 24. " UDPGOCT ,Rx UDP (Good) Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 23. " V6NOPAYOCT ,Rx IPv6 No Payload Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 22. " V6HDERROCT ,Rx IPv6 Header Error Octets Count Half/Full Mask" "0,1" newline bitfld.long 0x00 21. " V6GOCT ,Rx IPv6 (Good) Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 20. " V4UDSBLOCT ,Rx IPv4 UDS Disable Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 19. " V4FRAGOCT ,Rx IPv4 Fragmented Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 18. " V4NOPAYOCT ,Rx IPv4 No Payload Octets Count Half/Full Mask" "0,1" newline bitfld.long 0x00 17. " V4HDERROCT ,Rx IPv4 Header Error Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 16. " V4GOCT ,Rx IPv4 (Good) Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 13. " ICMPERRFRM ,Rx ICMP Error Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 12. " ICMPGFRM ,Rx ICMP (Good) Frames Count Half/Full Mask" "0,1" newline bitfld.long 0x00 11. " TCPERRFRM ,Rx TCP Error Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 10. " TCPGFRM ,Rx TCP (Good) Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 9. " UDPERRFRM ,Rx UDP Error Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 8. " UDPGFRM ,Rx UDP (Good) Frames Count Half/Full Mask" "0,1" newline bitfld.long 0x00 7. " V6NOPAYFRM ,Rx IPv6 No Payload Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 6. " V6HDERRFRM ,Rx IPv6 Header Error Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 5. " V6GFRM ,Rx IPv6 (Good) Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 4. " V4UDSBLFRM ,Rx IPv4 UDS Disable Frames Count Half/Full Mask" "0,1" newline bitfld.long 0x00 3. " V4FRAGFRM ,Rx IPv4 Fragmented Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 2. " V4NOPAYFRM ,Rx IPv4 No Payload Frame Count Half/Full Mask" "0,1" bitfld.long 0x00 1. " V4HDERRFRM ,Rx IPv4 Header Error Frame Count Half/Full Mask" "0,1" bitfld.long 0x00 0. " V4GFRM ,Rx IPv4 (Good) Frames Count Half/Full Mask" "0,1" group.long 0x208++0x3 line.long 0x00 "EMAC0_IPC_RXINT,EMAC0 MMC IPC Rx Interrupt Register" bitfld.long 0x00 29. " ICMPERROCT ,Rx ICMP Error Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 28. " ICMPGOCT ,Rx ICMP (Good) Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 27. " TCPERROCT ,Rx TCP Error Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 26. " TCPGOCT ,Rx TCP (Good) Octets Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 25. " UDPERROCT ,Rx UDP Error Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 24. " UDPGOCT ,Rx UDP (Good) Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 23. " V6NOPAYOCT ,Rx IPv6 No Payload Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 22. " V6HDERROCT ,Rx IPv6 Header Error Octets Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 21. " V6GOCT ,Rx IPv6 (Good) Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 20. " V4UDSBLOCT ,Rx IPv4 UDS Disable Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 19. " V4FRAGOCT ,Rx IPv4 Fragmented Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 18. " V4NOPAYOCT ,Rx IPv4 No Payload Octets Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 17. " V4HDERROCT ,Rx IPv4 Header Error Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 16. " V4GOCT ,Rx IPv4 (Good) Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 13. " ICMPERRFRM ,Rx ICMP Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 12. " ICMPGFRM ,Rx ICMP (Good) Frames Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 11. " TCPERRFRM ,Rx TCP Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 10. " TCPGFRM ,Rx TCP (Good) Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 9. " UDPERRFRM ,Rx IDP Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 8. " UDPGFRM ,Rx UDP (Good) Frames Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 7. " V6NOPAYFRM ,Rx IPv6 No Payload Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 6. " V6HDERRFRM ,Rx IPv6 Header Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 5. " V6GFRM ,Rx IPv6 (Good) Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 4. " V4UDSBLFRM ,Rx IPv4 UDS Disable Frames Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 3. " V4FRAGFRM ,Rx IPv4 Fragmented Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 2. " V4NOPAYFRM ,Rx IPv4 No Payload Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 1. " V4HDERRFRM ,Rx IPv4 Header Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 0. " V4GFRM ,Rx IPv4 (Good) Frames Count Half/Full Interrupt" "0,1" group.long 0x210++0x3 line.long 0x00 "EMAC0_RXIPV4_GD_FRM,EMAC0 Rx IPv4 Datagrams (Good) Register" group.long 0x214++0x3 line.long 0x00 "EMAC0_RXIPV4_HDR_ERR_FRM,EMAC0 Rx IPv4 Datagrams Header Errors Register" group.long 0x218++0x3 line.long 0x00 "EMAC0_RXIPV4_NOPAY_FRM,EMAC0 Rx IPv4 Datagrams No Payload Frame Register" group.long 0x21C++0x3 line.long 0x00 "EMAC0_RXIPV4_FRAG_FRM,EMAC0 Rx IPv4 Datagrams Fragmented Frames Register" group.long 0x220++0x3 line.long 0x00 "EMAC0_RXIPV4_UDSBL_FRM,EMAC0 Rx IPv4 UDP Disabled Frames Register" group.long 0x224++0x3 line.long 0x00 "EMAC0_RXIPV6_GD_FRM,EMAC0 Rx IPv6 Datagrams Good Frames Register" group.long 0x228++0x3 line.long 0x00 "EMAC0_RXIPV6_HDR_ERR_FRM,EMAC0 Rx IPv6 Datagrams Header Error Frames Register" group.long 0x22C++0x3 line.long 0x00 "EMAC0_RXIPV6_NOPAY_FRM,EMAC0 Rx IPv6 Datagrams No Payload Frames Register" group.long 0x230++0x3 line.long 0x00 "EMAC0_RXUDP_GD_FRM,EMAC0 Rx UDP Good Frames Register" group.long 0x234++0x3 line.long 0x00 "EMAC0_RXUDP_ERR_FRM,EMAC0 Rx UDP Error Frames Register" group.long 0x238++0x3 line.long 0x00 "EMAC0_RXTCP_GD_FRM,EMAC0 Rx TCP Good Frames Register" group.long 0x23C++0x3 line.long 0x00 "EMAC0_RXTCP_ERR_FRM,EMAC0 Rx TCP Error Frames Register" group.long 0x240++0x3 line.long 0x00 "EMAC0_RXICMP_GD_FRM,EMAC0 Rx ICMP Good Frames Register" group.long 0x244++0x3 line.long 0x00 "EMAC0_RXICMP_ERR_FRM,EMAC0 Rx ICMP Error Frames Register" group.long 0x250++0x3 line.long 0x00 "EMAC0_RXIPV4_GD_OCT,EMAC0 Rx IPv4 Datagrams Good Octets Register" group.long 0x254++0x3 line.long 0x00 "EMAC0_RXIPV4_HDR_ERR_OCT,EMAC0 Rx IPv4 Datagrams Header Errors Register" group.long 0x258++0x3 line.long 0x00 "EMAC0_RXIPV4_NOPAY_OCT,EMAC0 Rx IPv4 Datagrams No Payload Octets Register" group.long 0x25C++0x3 line.long 0x00 "EMAC0_RXIPV4_FRAG_OCT,EMAC0 Rx IPv4 Datagrams Fragmented Octets Register" group.long 0x260++0x3 line.long 0x00 "EMAC0_RXIPV4_UDSBL_OCT,EMAC0 Rx IPv4 UDP Disabled Octets Register" group.long 0x264++0x3 line.long 0x00 "EMAC0_RXIPV6_GD_OCT,EMAC0 Rx IPv6 Good Octets Register" group.long 0x268++0x3 line.long 0x00 "EMAC0_RXIPV6_HDR_ERR_OCT,EMAC0 Rx IPv6 Header Errors Register" group.long 0x26C++0x3 line.long 0x00 "EMAC0_RXIPV6_NOPAY_OCT,EMAC0 Rx IPv6 No Payload Octets Register" group.long 0x270++0x3 line.long 0x00 "EMAC0_RXUDP_GD_OCT,EMAC0 Rx UDP Good Octets Register" group.long 0x274++0x3 line.long 0x00 "EMAC0_RXUDP_ERR_OCT,EMAC0 Rx UDP Error Octets Register" group.long 0x278++0x3 line.long 0x00 "EMAC0_RXTCP_GD_OCT,EMAC0 Rx TCP Good Octets Register" group.long 0x27C++0x3 line.long 0x00 "EMAC0_RXTCP_ERR_OCT,EMAC0 Rx TCP Error Octets Register" group.long 0x280++0x3 line.long 0x00 "EMAC0_RXICMP_GD_OCT,EMAC0 Rx ICMP Good Octets Register" group.long 0x284++0x3 line.long 0x00 "EMAC0_RXICMP_ERR_OCT,EMAC0 Rx ICMP Error Octets Register" group.long 0x400++0x3 line.long 0x00 "EMAC0_L3L4_CTL,EMAC0 Layer3 and Layer4 Control Register" bitfld.long 0x00 21. " L4DPIM ,Layer 4 Destination Port Inverse Matching" "0,1" bitfld.long 0x00 20. " L4DPM ,Layer 4 Destination Port Matching" "0,1" bitfld.long 0x00 19. " L4SPIM ,Layer 4 Source Port Inverse Matching" "0,1" bitfld.long 0x00 18. " L4SPM ,Layer 4 Source Port Matching" "0,1" newline bitfld.long 0x00 16. " L4PEN ,Layer 4 Filtering Enable" "0,1" bitfld.long 0x00 11.--15. " L3HDBM ,Layer 3 Destination Address Bits Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6.--10. " L3HSBM ,Layer 3 Source Address Bits Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM ,Layer 3 Destination Address Inverse Matching" "0,1" newline bitfld.long 0x00 4. " L3DAM ,Layer 3 Destination Address Matching" "0,1" bitfld.long 0x00 3. " L3SAIM ,Layer 3 Source Address Inverse Matching" "0,1" bitfld.long 0x00 2. " L3SAM ,Layer 3 Source Address Matching" "0,1" bitfld.long 0x00 0. " L3PEN ,Layer 3 Enabled" "0,1" group.long 0x404++0x3 line.long 0x00 "EMAC0_L4_ADDR,EMAC0 Layer 4 Address Register" hexmask.long.word 0x00 16.--31. 1. " L4DP ,Layer 4 Destination Port" hexmask.long.word 0x00 0.--15. 1. " L4SP ,Layer 4 Source Port" group.long 0x410++0x3 line.long 0x00 "EMAC0_L3_ADDR0,EMAC0 Layer 3 Address0 Register" group.long 0x414++0x3 line.long 0x00 "EMAC0_L3_ADDR1,EMAC0 Layer 3 Address1 Register" group.long 0x418++0x3 line.long 0x00 "EMAC0_L3_ADDR2,EMAC0 Layer 3 Address2 Register" group.long 0x41C++0x3 line.long 0x00 "EMAC0_L3_ADDR3,EMAC0 Layer 3 Address3 Register" group.long 0x584++0x3 line.long 0x00 "EMAC0_VLAN_INCL,EMAC0 VLAN Tag Inclusion or Replacement Register" bitfld.long 0x00 19. " CSVL ,C-VLAN or S-VLAN" "0,1" bitfld.long 0x00 18. " VLP ,VLAN Priority Control" "0,1" bitfld.long 0x00 16.--17. " VLC ,VLAN Tag Control in Transmit Frames" "0,1,2,3" hexmask.long.word 0x00 0.--15. 1. " VLT ,VLAN Tag for Transmit Frames" group.long 0x588++0x3 line.long 0x00 "EMAC0_VLAN_HSHTBL,EMAC0 VLAN Hash Table Register" hexmask.long.word 0x00 0.--15. 1. " VLHT ,VLAN Hash Table" group.long 0x700++0x3 line.long 0x00 "EMAC0_TM_CTL,EMAC0 Time Stamp Control Register" bitfld.long 0x00 28. " ATSEN3 ,Auxiliary Snapshot 3 Enable" "0,1" bitfld.long 0x00 27. " ATSEN2 ,Auxiliary Snapshot 2 Enable" "0,1" bitfld.long 0x00 26. " ATSEN1 ,Auxiliary Snapshot 1 Enable" "0,1" bitfld.long 0x00 25. " ATSEN0 ,Auxiliary Snapshot 0 Enable" "0,1" newline bitfld.long 0x00 24. " ATSFC ,Auxiliary Time Stamp FIFO Clear" "0,1" bitfld.long 0x00 18. " TSENMACADDR ,Time Stamp Enable MAC Address" "0,1" bitfld.long 0x00 16.--17. " SNAPTYPSEL ,Snapshot Type Select" "0,1,2,3" bitfld.long 0x00 15. " TSMSTRENA ,Time Stamp Master (Frames) Enable" "0,1" newline bitfld.long 0x00 14. " TSEVNTENA ,Time Stamp Event (PTP Frames) Enable" "0,1" bitfld.long 0x00 13. " TSIPV4ENA ,Time Stamp IPV4 (PTP Frames) Enable" "0,1" bitfld.long 0x00 12. " TSIPV6ENA ,Time Stamp IPV6 (PTP Frames) Enable" "0,1" bitfld.long 0x00 11. " TSIPENA ,Time Stamp IP Enable" "0,1" newline bitfld.long 0x00 10. " TSVER2ENA ,Time Stamp VER2 (Snooping) Enable" "0,1" bitfld.long 0x00 9. " TSCTRLSSR ,Time Stamp Control Nanosecond Rollover" "0,1" bitfld.long 0x00 8. " TSENALL ,Time Stamp Enable All (Frames)" "0,1" bitfld.long 0x00 5. " TSADDREG ,Time Stamp Addend Register Update" "0,1" newline bitfld.long 0x00 4. " TSTRIG ,Time Stamp (Target Time) Trigger Enable" "0,1" bitfld.long 0x00 3. " TSUPDT ,Time Stamp (System Time) Update" "0,1" bitfld.long 0x00 2. " TSINIT ,Time Stamp (System Time) Initialize" "0,1" bitfld.long 0x00 1. " TSCFUPDT ,Time Stamp (System Time) Fine/Coarse Update" "0,1" newline bitfld.long 0x00 0. " TSENA ,Time Stamp (PTP) Enable" "0,1" group.long 0x704++0x3 line.long 0x00 "EMAC0_TM_SUBSEC,EMAC0 Time Stamp Sub Second Increment Register" hexmask.long.byte 0x00 0.--7. 1. " SSINC ,Sub-Second Increment Value" group.long 0x708++0x3 line.long 0x00 "EMAC0_TM_SEC,EMAC0 Time Stamp Low Seconds Register" group.long 0x70C++0x3 line.long 0x00 "EMAC0_TM_NSEC,EMAC0 Time Stamp Nanoseconds Register" hexmask.long 0x00 0.--30. 1. " TSSS ,Time Stamp Nanoseconds" group.long 0x710++0x3 line.long 0x00 "EMAC0_TM_SECUPDT,EMAC0 Time Stamp Seconds Update Register" group.long 0x714++0x3 line.long 0x00 "EMAC0_TM_NSECUPDT,EMAC0 Time Stamp Nanoseconds Update Register" bitfld.long 0x00 31. " ADDSUB ,Add or Subtract the Time" "0,1" hexmask.long 0x00 0.--30. 1. " TSSS ,Time Stamp Sub Second Initialize/Increment" group.long 0x718++0x3 line.long 0x00 "EMAC0_TM_ADDEND,EMAC0 Time Stamp Addend Register" group.long 0x71C++0x3 line.long 0x00 "EMAC0_TM_PPS0TGTM,EMAC0 Time Stamp Target Time Seconds Register" group.long 0x720++0x3 line.long 0x00 "EMAC0_TM_PPS0NTGTM,EMAC0 Time Stamp Target Time Nanoseconds Register" bitfld.long 0x00 31. " TSTRBUSY ,Target Time Register Busy" "0,1" hexmask.long 0x00 0.--30. 1. " TSTR ,Target Time Nano Seconds" group.long 0x724++0x3 line.long 0x00 "EMAC0_TM_HISEC,EMAC0 Time Stamp High Second Register" hexmask.long.word 0x00 0.--15. 1. " TSHWR ,Time Stamp Higher Word Seconds Register" group.long 0x728++0x3 line.long 0x00 "EMAC0_TM_STMPSTAT,EMAC0 Time Stamp Status Register" bitfld.long 0x00 25.--27. " ATSNS ,Auxiliary Time Stamp Number of Snapshots" "0,1,2,3,4,5,6,7" bitfld.long 0x00 24. " ATSSTM ,Auxiliary Time Stamp Snapshot Trigger Missed" "0,1" bitfld.long 0x00 16.--19. " ATSSTN ,Auxiliary Timestamp Snapshot Trigger Identifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 9. " TSTRGTERR3 ,Timestamp Target Time Error 3" "0,1" newline bitfld.long 0x00 8. " TSTARGT3 ,Timestamp Target Time Reached for Target Time PPS3" "0,1" bitfld.long 0x00 7. " TSTRGTERR2 ,Timestamp Target Time Error 2" "0,1" bitfld.long 0x00 6. " TSTARGT2 ,Timestamp Target Time Reached for Target Time PPS2" "0,1" bitfld.long 0x00 5. " TSTRGTERR1 ,Timestamp Target Time Error 1" "0,1" newline bitfld.long 0x00 4. " TSTARGT1 ,Timestamp Target Time Reached for Target Time PPS1" "0,1" bitfld.long 0x00 3. " TSTRGTERR0 ,Time Stamp Target Time Programming Error" "0,1" bitfld.long 0x00 2. " ATSTS ,Auxiliary Time Stamp Trigger Snapshot" "0,1" bitfld.long 0x00 1. " TSTARGT0 ,Time Stamp Target Time Reached" "0,1" newline bitfld.long 0x00 0. " TSSOVF ,Time Stamp Seconds Overflow" "0,1" group.long 0x72C++0x3 line.long 0x00 "EMAC0_TM_PPSCTL,EMAC0 PPS Control Register" bitfld.long 0x00 29.--30. " TRGTMODSEL3 ,Target Time Register Mode for PPS3" "0,1,2,3" bitfld.long 0x00 24.--26. " PPSCMD3 ,Flexible PPS3 Output Control" "0,1,2,3,4,5,6,7" bitfld.long 0x00 21.--22. " TRGTMODSEL2 ,Target Time Register Mode for PPS2" "0,1,2,3" bitfld.long 0x00 16.--18. " PPSCMD2 ,Flexible PPS2 Output Control" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 13.--14. " TRGTMODSEL1 ,Target Time Register Mode for PPS1" "0,1,2,3" bitfld.long 0x00 8.--10. " PPSCMD1 ,Flexible PPS1 Output Control" "0,1,2,3,4,5,6,7" bitfld.long 0x00 5.--6. " TRGTMODSEL0 ,Target Time Register Mode" "0,1,2,3" bitfld.long 0x00 4. " PPSEN ,Enable the flexible PPS output mode" "0,1" newline bitfld.long 0x00 0.--3. " PPSCTL0 ,PPS Frequency Control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x730++0x3 line.long 0x00 "EMAC0_TM_AUXSTMP_NSEC,EMAC0 Time Stamp Auxiliary TS Nano Seconds Register" group.long 0x734++0x3 line.long 0x00 "EMAC0_TM_AUXSTMP_SEC,EMAC0 Time Stamp Auxiliary TM Seconds Register" group.long 0x738++0x3 line.long 0x00 "EMAC0_MAC_AVCTL,EMAC0 AV MAC Control Register" bitfld.long 0x00 24.--25. " PTPCH ,Channel for Queuing the PTP Packets" "0,1,2,3" bitfld.long 0x00 21.--22. " AVCH ,Channel for Queuing AV Control Packets" "0,1,2,3" bitfld.long 0x00 20. " AVCD ,AV Channel Disable" "0,1" bitfld.long 0x00 19. " VQE ,VLAN Tagged non-AV packets queuing enable" "0,1" newline bitfld.long 0x00 16.--18. " AVP ,AV Priority for Queuing" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 0.--15. 1. " AVT ,AV Ether Type Value" group.long 0x760++0x3 line.long 0x00 "EMAC0_TM_PPS0INTVL,EMAC0 Time Stamp PPS Interval Register" group.long 0x764++0x3 line.long 0x00 "EMAC0_TM_PPS0WIDTH,EMAC0 PPS Width Register" group.long 0x780++0x3 line.long 0x00 "EMAC0_TM_PPS1TGTM,EMAC0 PPS 1 Target Time Seconds Register" group.long 0x784++0x3 line.long 0x00 "EMAC0_TM_PPS1NTGTM,EMAC0 PPS 1 Target Time Nanoseconds Register" bitfld.long 0x00 31. " TSTRBUSY ,Target-Time Register" "0,1" hexmask.long 0x00 0.--30. 1. " TSTR ,Target-Time Low Register" group.long 0x788++0x3 line.long 0x00 "EMAC0_TM_PPS1INTVL,EMAC0 PPS 1 Interval Register" group.long 0x78C++0x3 line.long 0x00 "EMAC0_TM_PPS1WIDTH,EMAC0 PPS 1 Width Register" group.long 0x7A0++0x3 line.long 0x00 "EMAC0_TM_PPS2TGTM,EMAC0 PPS 2 Target Time Seconds Register" group.long 0x7A4++0x3 line.long 0x00 "EMAC0_TM_PPS2NTGTM,EMAC0 PPS 2 Target Time Nanoseconds Register" bitfld.long 0x00 31. " TSTRBUSY ,Target time register" "0,1" hexmask.long 0x00 0.--30. 1. " TSTR ,Target Time Low Register" group.long 0x7A8++0x3 line.long 0x00 "EMAC0_TM_PPS2INTVL,EMAC0 PPS 2 Interval Register" group.long 0x7AC++0x3 line.long 0x00 "EMAC0_TM_PPS2WIDTH,EMAC0 PPS 2 Width Register" group.long 0x7C0++0x3 line.long 0x00 "EMAC0_TM_PPS3TGTM,EMAC0 PPS 3 Target Time Seconds Register" group.long 0x7C4++0x3 line.long 0x00 "EMAC0_TM_PPS3NTGTM,EMAC0 PPS 3 Target Time Nanoseconds Register" bitfld.long 0x00 31. " TSTRBUSY ,Target Time Register" "0,1" hexmask.long 0x00 0.--30. 1. " TSTR ,Target Time Low Register" group.long 0x7C8++0x3 line.long 0x00 "EMAC0_TM_PPS3INTVL,EMAC0 PPS 3 Interval Register" group.long 0x7CC++0x3 line.long 0x00 "EMAC0_TM_PPS3WIDTH,EMAC0 PPS 3 Width Register" group.long 0x1000++0x3 line.long 0x00 "EMAC0_DMA0_BUSMODE,EMAC0 DMA Bus Mode Register" bitfld.long 0x00 25. " AAL ,Address Aligned Bursts" "0,1" bitfld.long 0x00 24. " PBL8 ,PBL * 8" "0,1" bitfld.long 0x00 23. " USP ,Use Separate PBL" "0,1" bitfld.long 0x00 17.--22. " RPBL ,Receive Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16. " FB ,Fixed Burst" "0,1" bitfld.long 0x00 8.--13. " PBL ,Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. " ATDS ,Alternate Descriptor Size" "0,1" bitfld.long 0x00 2.--6. " DSL ,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0. " SWR ,Software Reset" "0,1" group.long 0x1004++0x3 line.long 0x00 "EMAC0_DMA0_TXPOLL,EMAC0 DMA Tx Poll Demand Register" group.long 0x1008++0x3 line.long 0x00 "EMAC0_DMA0_RXPOLL,EMAC0 DMA Rx Poll Demand register" group.long 0x100C++0x3 line.long 0x00 "EMAC0_DMA0_RXDSC_ADDR,EMAC0 DMA Rx Descriptor List Address Register" group.long 0x1010++0x3 line.long 0x00 "EMAC0_DMA0_TXDSC_ADDR,EMAC0 DMA Tx Descriptor List Address Register" group.long 0x1014++0x3 line.long 0x00 "EMAC0_DMA0_STAT,EMAC0 DMA Status Register" bitfld.long 0x00 30. " GLPII ,GMAC LPI Interrupt" "0,1" bitfld.long 0x00 29. " TTI ,Time Stamp Trigger Interrupt" "0,1" bitfld.long 0x00 27. " MCI ,MAC MMC Interrupt" "0,1" bitfld.long 0x00 26. " GLI ,Line Interface Interrupt" "0,1" newline bitfld.long 0x00 23.--25. " EB ,Error Bits" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20.--22. " TS ,Tx Process State" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17.--19. " RS ,Rx Process State" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16. " NIS ,Normal Interrupt Summary" "0,1" newline bitfld.long 0x00 15. " AIS ,Abnormal Interrupt Summary" "0,1" bitfld.long 0x00 14. " ERI ,Early Receive Interrupt" "0,1" bitfld.long 0x00 13. " FBI ,Fatal Bus Error Interrupt" "0,1" bitfld.long 0x00 10. " ETI ,Early Transmit Interrupt" "0,1" newline bitfld.long 0x00 9. " RWT ,Receive WatchDog Timeout" "0,1" bitfld.long 0x00 8. " RPS ,Receive Process Stopped" "0,1" bitfld.long 0x00 7. " RU ,Receive Buffer Unavailable" "0,1" bitfld.long 0x00 6. " RI ,Receive Interrupt" "0,1" newline bitfld.long 0x00 5. " UNF ,Transmit Buffer Underflow" "0,1" bitfld.long 0x00 4. " OVF ,Receive Buffer Overflow" "0,1" bitfld.long 0x00 3. " TJT ,Transmit Jabber Timeout" "0,1" bitfld.long 0x00 2. " TU ,Transmit Buffer Unavailable" "0,1" newline bitfld.long 0x00 1. " TPS ,Transmit Process Stopped" "0,1" bitfld.long 0x00 0. " TI ,Transmit Interrupt" "0,1" group.long 0x1018++0x3 line.long 0x00 "EMAC0_DMA0_OPMODE,EMAC0 DMA Operation Mode Register" bitfld.long 0x00 26. " DT ,Disable Dropping TCP/IP Errors" "0,1" bitfld.long 0x00 25. " RSF ,Receive Store and Forward" "0,1" bitfld.long 0x00 24. " DFF ,Disable Flushing of received Frames" "0,1" bitfld.long 0x00 21. " TSF ,Transmit Store and Forward" "0,1" newline bitfld.long 0x00 20. " FTF ,Flush Transmit FIFO" "0,1" bitfld.long 0x00 14.--16. " TTC ,Transmit Threshold Control" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13. " ST ,Start/Stop Transmission" "0,1" bitfld.long 0x00 7. " FEF ,Forward Error Frames" "0,1" newline bitfld.long 0x00 6. " FUF ,Forward Undersized good Frames" "0,1" bitfld.long 0x00 5. " DGF ,Drop Gaint Frames" "0,1" bitfld.long 0x00 3.--4. " RTC ,Receive Threshold Control" "0,1,2,3" bitfld.long 0x00 2. " OSF ,Operate on Second Frame" "0,1" newline bitfld.long 0x00 1. " SR ,Start/Stop Receive" "0,1" group.long 0x101C++0x3 line.long 0x00 "EMAC0_DMA0_IEN,EMAC0 DMA Interrupt Enable Register" bitfld.long 0x00 16. " NIE ,Normal Interrupt Summary Enable" "0,1" bitfld.long 0x00 15. " AIE ,Abnormal Interrupt Summary Enable" "0,1" bitfld.long 0x00 14. " ERE ,Early Receive Interrupt Enable" "0,1" bitfld.long 0x00 13. " FBE ,Fatal Bus Error Enable" "0,1" newline bitfld.long 0x00 10. " ETE ,Early Transmit Interrupt Enable" "0,1" bitfld.long 0x00 9. " RWE ,Receive WatchdogTimeout Enable" "0,1" bitfld.long 0x00 8. " RSE ,Receive Stopped Enable" "0,1" bitfld.long 0x00 7. " RUE ,Receive Buffer Unavailable Enable" "0,1" newline bitfld.long 0x00 6. " RIE ,Receive Interrupt Enable" "0,1" bitfld.long 0x00 5. " UNE ,Underflow Interrupt Enable" "0,1" bitfld.long 0x00 4. " OVE ,Overflow Interrupt Enable" "0,1" bitfld.long 0x00 3. " TJE ,Transmit Jabber Timeout Enable" "0,1" newline bitfld.long 0x00 2. " TUE ,Transmit Buffer Unavailable Enable" "0,1" bitfld.long 0x00 1. " TSE ,Transmit Stopped Enable" "0,1" bitfld.long 0x00 0. " TIE ,Transmit Interrupt Enable" "0,1" group.long 0x1020++0x3 line.long 0x00 "EMAC0_DMA0_MISS_FRM,EMAC0 DMA Missed Frame Register" bitfld.long 0x00 28. " OVFFIFO ,Overflow bit for FIFO Overflow Counter" "0,1" hexmask.long.word 0x00 17.--27. 1. " MISSFROV ,Missed Frames Buffer Overflow" bitfld.long 0x00 16. " OVFMISS ,Overflow bit for Missed Frame Counter" "0,1" hexmask.long.word 0x00 0.--15. 1. " MISSFRUN ,Missed Frames Unavailable Buffer" group.long 0x1024++0x3 line.long 0x00 "EMAC0_DMA0_RXIWDOG,EMAC0 DMA Rx Interrupt Watch Dog Register" hexmask.long.byte 0x00 0.--7. 1. " RIWT ,RI WatchDog Timer Count" group.long 0x1028++0x3 line.long 0x00 "EMAC0_DMA0_BMMODE,EMAC0 DMA SCB Bus Mode Register" bitfld.long 0x00 31. " ENLPI ,Enable Low Power Interface" "0,1" bitfld.long 0x00 20.--22. " WROSRLMT ,SCB Maximum Write Outstanding Request" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. " RDOSRLMT ,SCB Maximum Read Outstanding Request" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13. " ONEKBBE ,1K Boundary Crossing Enable" "0,1" newline bitfld.long 0x00 12. " AAL ,Address Aligned Beats" "0,1" bitfld.long 0x00 3. " BLEN16 ,SCB Burst Length 16" "0,1" bitfld.long 0x00 2. " BLEN8 ,SCB Burst Length 8" "0,1" bitfld.long 0x00 1. " BLEN4 ,SCB Burst Length 4" "0,1" newline bitfld.long 0x00 0. " UNDEF ,SCB Undefined Burst Length" "0,1" group.long 0x102C++0x3 line.long 0x00 "EMAC0_DMA0_BMSTAT,EMAC0 DMA SCB Status Register" bitfld.long 0x00 1. " BUSRD ,Bus (SCB master) Read Active" "0,1" bitfld.long 0x00 0. " BUSWR ,Bus (SCB master) Write Active" "0,1" group.long 0x1048++0x3 line.long 0x00 "EMAC0_DMA0_TXDSC_CUR,EMAC0 DMA Tx Descriptor Current Register" group.long 0x104C++0x3 line.long 0x00 "EMAC0_DMA0_RXDSC_CUR,EMAC0 DMA Rx Descriptor Current Register" group.long 0x1050++0x3 line.long 0x00 "EMAC0_DMA0_TXBUF_CUR,EMAC0 DMA Tx Buffer Current Register" group.long 0x1054++0x3 line.long 0x00 "EMAC0_DMA0_RXBUF_CUR,EMAC0 DMA Rx Buffer Current Register" group.long 0x1100++0x3 line.long 0x00 "EMAC0_DMA1_BUSMODE,EMAC0 DMA Bus Mode Register" bitfld.long 0x00 25. " AAL ,Address Aligned Bursts" "0,1" bitfld.long 0x00 24. " PBL8 ,PBL * 8" "0,1" bitfld.long 0x00 23. " USP ,Use Separate PBL" "0,1" bitfld.long 0x00 17.--22. " RPBL ,Receive Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16. " FB ,Fixed Burst" "0,1" bitfld.long 0x00 8.--13. " PBL ,Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. " ATDS ,Alternate Descriptor Size" "0,1" bitfld.long 0x00 2.--6. " DSL ,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x1104++0x3 line.long 0x00 "EMAC0_DMA1_TXPOLL,EMAC0 DMA Tx Poll Demand Register" group.long 0x1108++0x3 line.long 0x00 "EMAC0_DMA1_RXPOLL,EMAC0 DMA Rx Poll Demand Register" group.long 0x110C++0x3 line.long 0x00 "EMAC0_DMA1_RXDSC_ADDR,EMAC0 DMA Rx Descriptor List Address Register" group.long 0x1110++0x3 line.long 0x00 "EMAC0_DMA1_TXDSC_ADDR,EMAC0 DMA Tx Descriptor List Address Register" group.long 0x1114++0x3 line.long 0x00 "EMAC0_DMA1_STAT,EMAC0 DMA Status Register" bitfld.long 0x00 30. " GTMSI ,MAC TMS Interrupt" "0,1" bitfld.long 0x00 29. " TTI ,Time Stamp Trigger Interrupt" "0,1" bitfld.long 0x00 27. " MCI ,MAC MMC Interrupt" "0,1" bitfld.long 0x00 26. " GLI ,Line Interface Interrupt" "0,1" newline bitfld.long 0x00 23.--25. " EB ,Error Bits" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20.--22. " TS ,Tx Process State" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17.--19. " RS ,Rx Process State" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16. " NIS ,Normal Interrupt Summary" "0,1" newline bitfld.long 0x00 15. " AIS ,Abnormal Interrupt Summary" "0,1" bitfld.long 0x00 14. " ERI ,Early Receive Interrupt" "0,1" bitfld.long 0x00 13. " FBI ,Fatal Bus Error Interrupt" "0,1" bitfld.long 0x00 10. " ETI ,Early Transmit Interrupt" "0,1" newline bitfld.long 0x00 9. " RWT ,Receive WatchDog Timeout" "0,1" bitfld.long 0x00 8. " RPS ,Receive Process Stopped" "0,1" bitfld.long 0x00 7. " RU ,Receive Buffer Unavailable" "0,1" bitfld.long 0x00 6. " RI ,Receive Interrupt" "0,1" newline bitfld.long 0x00 5. " UNF ,Transmit Buffer Underflow" "0,1" bitfld.long 0x00 4. " OVF ,Receive Buffer Overflow" "0,1" bitfld.long 0x00 3. " TJT ,Transmit Jabber Timeout" "0,1" bitfld.long 0x00 2. " TU ,Transmit Buffer Unavailable" "0,1" newline bitfld.long 0x00 1. " TPS ,Transmit Process Stopped" "0,1" bitfld.long 0x00 0. " TI ,Transmit Interrupt" "0,1" group.long 0x1118++0x3 line.long 0x00 "EMAC0_DMA1_OPMODE,EMAC0 DMA Operation Mode Register" bitfld.long 0x00 26. " DT ,Disable Dropping TCP/IP Errors" "0,1" bitfld.long 0x00 25. " RSF ,Receive Store and Forward" "0,1" bitfld.long 0x00 24. " DFF ,Disable Flushing of received Frames" "0,1" bitfld.long 0x00 21. " TSF ,Transmit Store and Forward" "0,1" newline bitfld.long 0x00 20. " FTF ,Flush Transmit FIFO" "0,1" bitfld.long 0x00 14.--16. " TTC ,Transmit Threshold Control" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13. " ST ,Start/Stop Transmission" "0,1" bitfld.long 0x00 7. " FEF ,Forward Error Frames" "0,1" newline bitfld.long 0x00 6. " FUF ,Forward Undersized Good Frames" "0,1" bitfld.long 0x00 5. " DGF ,Drop Giant Frames" "0,1" bitfld.long 0x00 3.--4. " RTC ,Receive Threshold Control" "0,1,2,3" bitfld.long 0x00 2. " OSF ,Operate on Second Frame" "0,1" newline bitfld.long 0x00 1. " SR ,Start/Stop Receive" "0,1" group.long 0x111C++0x3 line.long 0x00 "EMAC0_DMA1_IEN,EMAC0 DMA Interrupt Enable Register" bitfld.long 0x00 16. " NIE ,Normal Interrupt Summary Enable" "0,1" bitfld.long 0x00 15. " AIE ,Abnormal Interrupt Summary Enable" "0,1" bitfld.long 0x00 14. " ERE ,Early Receive Interrupt Enable" "0,1" bitfld.long 0x00 13. " FBE ,Fatal Bus Error Enable" "0,1" newline bitfld.long 0x00 10. " ETE ,Early Transmit Interrupt Enable" "0,1" bitfld.long 0x00 9. " RWE ,Receive Watchdog Timeout Enable" "0,1" bitfld.long 0x00 8. " RSE ,Receive Stopped Enable" "0,1" bitfld.long 0x00 7. " RUE ,Receive Buffer Unavailable Enable" "0,1" newline bitfld.long 0x00 6. " RIE ,Receive Interrupt Enable" "0,1" bitfld.long 0x00 5. " UNE ,Underflow Interrupt Enable" "0,1" bitfld.long 0x00 4. " OVE ,Overflow Interrupt Enable" "0,1" bitfld.long 0x00 3. " TJE ,Transmit Jabber Timeout Enable" "0,1" newline bitfld.long 0x00 2. " TUE ,Transmit Buffer Unavailable Enable" "0,1" bitfld.long 0x00 1. " TSE ,Transmit Stopped Enable" "0,1" bitfld.long 0x00 0. " TIE ,Transmit Interrupt Enable" "0,1" group.long 0x1120++0x3 line.long 0x00 "EMAC0_DMA1_MISS_FRM,EMAC0 DMA Missed Frame Register" bitfld.long 0x00 28. " OVFFIFO ,Overflow bit for FIFO Overflow Counter" "0,1" hexmask.long.word 0x00 17.--27. 1. " MISSFROV ,Missed Frames Buffer Overflow" bitfld.long 0x00 16. " OVFMISS ,Overflow bit for Missed Frame Counter" "0,1" hexmask.long.word 0x00 0.--15. 1. " MISSFRUN ,Missed Frames Unavailable Buffer" group.long 0x1124++0x3 line.long 0x00 "EMAC0_DMA1_RXIWDOG,EMAC0 DMA Rx Interrupt Watch Dog Register" hexmask.long.byte 0x00 0.--7. 1. " RIWT ,RI Watch Dog Timer Count" group.long 0x1130++0x3 line.long 0x00 "EMAC0_DMA1_CHSFCS,EMAC0 Channel 1 Control Bits for Slot Function Register" bitfld.long 0x00 16.--19. " RSN ,Reference Slot Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. " ASC ,Advance Slot Check" "0,1" bitfld.long 0x00 0. " ESC ,Enable Slot Comparison" "0,1" group.long 0x1148++0x3 line.long 0x00 "EMAC0_DMA1_TXDSC_CUR,EMAC0 DMA Tx Descriptor Current Register" group.long 0x114C++0x3 line.long 0x00 "EMAC0_DMA1_RXDSC_CUR,EMAC0 DMA Rx Descriptor Current Register" group.long 0x1150++0x3 line.long 0x00 "EMAC0_DMA1_TXBUF_CUR,EMAC0 DMA Tx Buffer Current Register" group.long 0x1154++0x3 line.long 0x00 "EMAC0_DMA1_RXBUF_CUR,EMAC0 DMA Rx Buffer Current Register" group.long 0x1160++0x3 line.long 0x00 "EMAC0_DMA1_CHCBSCTL,EMAC0 Channel 1 Credit Shaping Control Register" bitfld.long 0x00 17. " ABPSSIE ,Average Bits Per Slot Interrupt Enable" "0,1" bitfld.long 0x00 4.--6. " SLC ,Slot Count" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1. " CC ,Credit Control" "0,1" bitfld.long 0x00 0. " CBSD ,Credit based shaper disable" "0,1" group.long 0x1164++0x3 line.long 0x00 "EMAC0_DMA1_CHCBSSTAT,EMAC0 Channel 1 Average Traffic Transmitted Register" bitfld.long 0x00 17. " ABSU ,ABS Updated" "0,1" hexmask.long.tbyte 0x00 0.--16. 1. " ABS ,Average Bits Per Slot" group.long 0x1168++0x3 line.long 0x00 "EMAC0_DMA1_CHISC,EMAC0 Channel 1 Idle Slope Credit Value Register" hexmask.long.word 0x00 0.--13. 1. " ISC ,Idle Slope Credit" group.long 0x116C++0x3 line.long 0x00 "EMAC0_DMA1_CHSSC,EMAC0 Channel 1 Send Slope Credit Value Register" hexmask.long.word 0x00 0.--13. 1. " SSC ,Send Slope Credit" group.long 0x1170++0x3 line.long 0x00 "EMAC0_DMA1_CHHIC,EMAC0 Channel 1 High Credit Value Register" hexmask.long 0x00 0.--28. 1. " HC ,High Credit" group.long 0x1174++0x3 line.long 0x00 "EMAC0_DMA1_CHLOC,EMAC0 Channel 1 Low Credit Value Register" hexmask.long 0x00 0.--28. 1. " LC ,Low Credit" group.long 0x1200++0x3 line.long 0x00 "EMAC0_DMA2_BUSMODE,EMAC0 DMA Bus Mode Register" bitfld.long 0x00 25. " AAL ,Address Aligned Bursts" "0,1" bitfld.long 0x00 24. " PBL8 ,PBL * 8" "0,1" bitfld.long 0x00 23. " USP ,Use Separate PBL" "0,1" bitfld.long 0x00 17.--22. " RPBL ,Receive Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16. " FB ,Fixed Burst" "0,1" bitfld.long 0x00 8.--13. " PBL ,Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. " ATDS ,Alternate Descriptor Size" "0,1" bitfld.long 0x00 2.--6. " DSL ,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0. " SWR ,Software Reset" "0,1" group.long 0x1204++0x3 line.long 0x00 "EMAC0_DMA2_TXPOLL,EMAC0 DMA Tx Poll Demand Register" group.long 0x1208++0x3 line.long 0x00 "EMAC0_DMA2_RXPOLL,EMAC0 DMA Rx Poll Demand register" group.long 0x120C++0x3 line.long 0x00 "EMAC0_DMA2_RXDSC_ADDR,EMAC0 DMA Rx Descriptor List Address Register" group.long 0x1210++0x3 line.long 0x00 "EMAC0_DMA2_TXDSC_ADDR,EMAC0 DMA Tx Descriptor List Address Register" group.long 0x1214++0x3 line.long 0x00 "EMAC0_DMA2_STAT,EMAC0 DMA Status Register" bitfld.long 0x00 30. " GTMSI ,MAC TMS Interrupt" "0,1" bitfld.long 0x00 29. " TTI ,Time Stamp Trigger Interrupt" "0,1" bitfld.long 0x00 27. " MCI ,MAC MMC Interrupt" "0,1" bitfld.long 0x00 26. " GLI ,Line Interface Interrupt" "0,1" newline bitfld.long 0x00 23.--25. " EB ,Error Bits" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20.--22. " TS ,Tx Process State" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17.--19. " RS ,Rx Process State" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16. " NIS ,Normal Interrupt Summary" "0,1" newline bitfld.long 0x00 15. " AIS ,Abnormal Interrupt Summary" "0,1" bitfld.long 0x00 14. " ERI ,Early Receive Interrupt" "0,1" bitfld.long 0x00 13. " FBI ,Fatal Bus Error Interrupt" "0,1" bitfld.long 0x00 10. " ETI ,Early Transmit Interrupt" "0,1" newline bitfld.long 0x00 9. " RWT ,Receive WatchDog Timeout" "0,1" bitfld.long 0x00 8. " RPS ,Receive Process Stopped" "0,1" bitfld.long 0x00 7. " RU ,Receive Buffer Unavailable" "0,1" bitfld.long 0x00 6. " RI ,Receive Interrupt" "0,1" newline bitfld.long 0x00 5. " UNF ,Transmit Buffer Underflow" "0,1" bitfld.long 0x00 4. " OVF ,Receive Buffer Overflow" "0,1" bitfld.long 0x00 3. " TJT ,Transmit Jabber Timeout" "0,1" bitfld.long 0x00 2. " TU ,Transmit Buffer Unavailable" "0,1" newline bitfld.long 0x00 1. " TPS ,Transmit Process Stopped" "0,1" bitfld.long 0x00 0. " TI ,Transmit Interrupt" "0,1" group.long 0x1218++0x3 line.long 0x00 "EMAC0_DMA2_OPMODE,EMAC0 DMA Operation Mode Register" bitfld.long 0x00 26. " DT ,Disable Dropping TCP/IP Errors" "0,1" bitfld.long 0x00 25. " RSF ,Receive Store and Forward" "0,1" bitfld.long 0x00 24. " DFF ,Disable Flushing of Received Frames" "0,1" bitfld.long 0x00 21. " TSF ,Transmit Store and Forward" "0,1" newline bitfld.long 0x00 20. " FTF ,Flush Transmit FIFO" "0,1" bitfld.long 0x00 14.--16. " TTC ,Transmit Threshold Control" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13. " ST ,Start/Stop Transmission" "0,1" bitfld.long 0x00 7. " FEF ,Forward Error Frames" "0,1" newline bitfld.long 0x00 6. " FUF ,Forward Undersized good Frames" "0,1" bitfld.long 0x00 5. " DGF ,Drop Giant Frames" "0,1" bitfld.long 0x00 3.--4. " RTC ,Receive Threshold Control" "0,1,2,3" bitfld.long 0x00 2. " OSF ,Operate on Second Frame" "0,1" newline bitfld.long 0x00 1. " SR ,Start/Stop Receive" "0,1" group.long 0x121C++0x3 line.long 0x00 "EMAC0_DMA2_IEN,EMAC0 DMA Interrupt Enable Register" bitfld.long 0x00 16. " NIE ,Normal Interrupt Summary Enable" "0,1" bitfld.long 0x00 15. " AIE ,Abnormal Interrupt Summary Enable" "0,1" bitfld.long 0x00 14. " ERE ,Early Receive Interrupt Enable" "0,1" bitfld.long 0x00 13. " FBE ,Fatal Bus Error Enable" "0,1" newline bitfld.long 0x00 10. " ETE ,Early Transmit Interrupt Enable" "0,1" bitfld.long 0x00 9. " RWE ,Receive Watchdog Timeout Enable" "0,1" bitfld.long 0x00 8. " RSE ,Receive Stopped Enable" "0,1" bitfld.long 0x00 7. " RUE ,Receive Buffer Unavailable Enable" "0,1" newline bitfld.long 0x00 6. " RIE ,Receive Interrupt Enable" "0,1" bitfld.long 0x00 5. " UNE ,Underflow Interrupt Enable" "0,1" bitfld.long 0x00 4. " OVE ,Overflow Interrupt Enable" "0,1" bitfld.long 0x00 3. " TJE ,Transmit Jabber Timeout Enable" "0,1" newline bitfld.long 0x00 2. " TUE ,Transmit Buffer Unavailable Enable" "0,1" bitfld.long 0x00 1. " TSE ,Transmit Stopped Enable" "0,1" bitfld.long 0x00 0. " TIE ,Transmit Interrupt Enable" "0,1" group.long 0x1220++0x3 line.long 0x00 "EMAC0_DMA2_MISS_FRM,EMAC0 DMA Missed Frame Register" bitfld.long 0x00 28. " OVFFIFO ,Overflow bit for FIFO Overflow Counter" "0,1" hexmask.long.word 0x00 17.--27. 1. " MISSFROV ,Missed Frames Buffer Overflow" bitfld.long 0x00 16. " OVFMISS ,Overflow bit for Missed Frame Counter" "0,1" hexmask.long.word 0x00 0.--15. 1. " MISSFRUN ,Missed Frames Unavailable Buffer" group.long 0x1224++0x3 line.long 0x00 "EMAC0_DMA2_RXIWDOG,EMAC0 DMA Rx Interrupt Watch Dog Register" hexmask.long.byte 0x00 0.--7. 1. " RIWT ,RI WatchDog Timer Count" group.long 0x1230++0x3 line.long 0x00 "EMAC0_DMA2_CHSFCS,EMAC0 Channel 2 Control Bits for Slot Function Register" bitfld.long 0x00 16.--19. " RSN ,Reference Slot number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. " ASC ,Advance Slot Check" "0,1" bitfld.long 0x00 0. " ESC ,Enable Slot Comparison" "0,1" group.long 0x1248++0x3 line.long 0x00 "EMAC0_DMA2_TXDSC_CUR,EMAC0 DMA Tx Descriptor Current Register" group.long 0x124C++0x3 line.long 0x00 "EMAC0_DMA2_RXDSC_CUR,EMAC0 DMA Rx Descriptor Current Register" group.long 0x1250++0x3 line.long 0x00 "EMAC0_DMA2_TXBUF_CUR,EMAC0 DMA Tx Buffer Current Register" group.long 0x1254++0x3 line.long 0x00 "EMAC0_DMA2_RXBUF_CUR,EMAC0 DMA Rx Buffer Current Register" group.long 0x1260++0x3 line.long 0x00 "EMAC0_DMA2_CHCBSCTL,EMAC0 Channel 2 Credit Shaping Control Register" bitfld.long 0x00 17. " ABPSSIE ,Average bits per slot Interrupt Enable" "0,1" bitfld.long 0x00 4.--6. " SLC ,Slot Count" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1. " CC ,Credit Control" "0,1" bitfld.long 0x00 0. " CBSD ,Credit Based Shaper Disable" "0,1" group.long 0x1264++0x3 line.long 0x00 "EMAC0_DMA2_CHCBSSTAT,EMAC0 Channel 2 Avg Traffic Transmitted Status Register" bitfld.long 0x00 17. " ABSU ,ABS Updated" "0,1" hexmask.long.tbyte 0x00 0.--16. 1. " ABS ,Average Bits per Slot" group.long 0x1268++0x3 line.long 0x00 "EMAC0_DMA2_CHISC,EMAC0 Channel 2 Idle Slope Credit Value Register" hexmask.long.word 0x00 0.--13. 1. " ISC ,Idle Slope Credit" group.long 0x126C++0x3 line.long 0x00 "EMAC0_DMA2_CHSSC,EMAC0 Channel 2 Send Slope Credit Value Register" hexmask.long.word 0x00 0.--13. 1. " SSC ,Send Slope Credit" group.long 0x1270++0x3 line.long 0x00 "EMAC0_DMA2_CHHIC,EMAC0 Channel 2 High Credit Value Register" hexmask.long 0x00 0.--28. 1. " HC ,High Credit" group.long 0x1274++0x3 line.long 0x00 "EMAC0_DMA2_CHLOC,EMAC0 Channel 2 Low Credit Value Register" hexmask.long 0x00 0.--28. 1. " LC ,Low Credit" tree.end sif !cpuis("ADSP-SC584")&&!cpuis("ADSP-SC584W") tree "EMAC1" base ad:0x3100E000 width 26. group.long 0x0++0x3 line.long 0x00 "EMAC1_MACCFG,EMAC1 MAC Configuration Register" bitfld.long 0x00 28.--30. " SARC ,Source Address Insertion or Replacement Control" "0,1,2,3,4,5,6,7" bitfld.long 0x00 27. " TWOKPE ,Support for 2K packets" "0,1" bitfld.long 0x00 25. " CST ,CRC Stripping" "0,1" bitfld.long 0x00 23. " WD ,Watch Dog Disable" "0,1" newline bitfld.long 0x00 22. " JB ,Jabber Disable" "0,1" bitfld.long 0x00 20. " JE ,Jumbo Frame Enable" "0,1" bitfld.long 0x00 17.--19. " IFG ,Inter-Frame Gap" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16. " DCRS ,Disable Carrier Sense" "0,1" newline bitfld.long 0x00 14. " FES ,Speed of Operation" "0,1" bitfld.long 0x00 13. " DO ,Disable Receive Own" "0,1" bitfld.long 0x00 12. " LM ,Loopback Mode" "0,1" bitfld.long 0x00 11. " DM ,Duplex Mode" "0,1" newline bitfld.long 0x00 10. " IPC ,IP Checksum" "0,1" bitfld.long 0x00 9. " DR ,Disable Retry" "0,1" bitfld.long 0x00 7. " ACS ,Automatic Pad/CRC Stripping" "0,1" bitfld.long 0x00 5.--6. " BL ,Back Off Limit" "0,1,2,3" newline bitfld.long 0x00 4. " DC ,Deferral Check" "0,1" bitfld.long 0x00 3. " TE ,Transmitter Enable" "0,1" bitfld.long 0x00 2. " RE ,Receiver Enable" "0,1" bitfld.long 0x00 0.--1. " PRELEN ,Preamble Length for Transmit Frames" "0,1,2,3" group.long 0x4++0x3 line.long 0x00 "EMAC1_MACFRMFILT,EMAC1 MAC Rx Frame Filter Register" bitfld.long 0x00 31. " RA ,Receive All Frames" "0,1" bitfld.long 0x00 21. " DNTU ,Drop non-TCP/UDP over IP Frames" "0,1" bitfld.long 0x00 20. " IPFE ,Layer 3 and Layer 4 Filter Enable" "0,1" bitfld.long 0x00 16. " VTFE ,VAN Tag Filter Enable" "0,1" newline bitfld.long 0x00 10. " HPF ,Hash or Perfect Filter" "0,1" bitfld.long 0x00 9. " SAF ,Source Address Filter Enable" "0,1" bitfld.long 0x00 8. " SAIF ,Source Address Inverse Filtering" "0,1" bitfld.long 0x00 6.--7. " PCF ,Pass Control Frames" "0,1,2,3" newline bitfld.long 0x00 5. " DBF ,Disable Broadcast Frames" "0,1" bitfld.long 0x00 4. " PM ,Pass All Multicast Frames" "0,1" bitfld.long 0x00 3. " DAIF ,Destination Address Inverse Filtering" "0,1" bitfld.long 0x00 2. " HMC ,Hash Multicast" "0,1" newline bitfld.long 0x00 1. " HUC ,Hash Unicast" "0,1" bitfld.long 0x00 0. " PR ,Promiscuous Mode" "0,1" group.long 0x8++0x3 line.long 0x00 "EMAC1_HASHTBL_HI,EMAC1 Hash Table High Register" group.long 0xC++0x3 line.long 0x00 "EMAC1_HASHTBL_LO,EMAC1 Hash Table Low Register" group.long 0x10++0x3 line.long 0x00 "EMAC1_SMI_ADDR,EMAC1 SMI Address Register" bitfld.long 0x00 11.--15. " PA ,Physical Layer Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6.--10. " SMIR ,SMI Register Address" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 2.--5. " CR ,Clock Range" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. " SMIW ,SMI Write" "0,1" newline bitfld.long 0x00 0. " SMIB ,SMI Busy" "0,1" group.long 0x14++0x3 line.long 0x00 "EMAC1_SMI_DATA,EMAC1 SMI Data Register" hexmask.long.word 0x00 0.--15. 1. " SMID ,SMI Data" group.long 0x18++0x3 line.long 0x00 "EMAC1_FLOWCTL,EMAC1 FLow Control Register" hexmask.long.word 0x00 16.--31. 1. " PT ,Pause Time" bitfld.long 0x00 7. " DZPQ ,Disable Zero-Quanta Pause" "0,1" bitfld.long 0x00 4.--5. " PLT ,Pause Low Threshold" "0,1,2,3" bitfld.long 0x00 3. " UP ,Unicast Pause Frame Detect" "0,1" newline bitfld.long 0x00 2. " RFE ,Receive Flow Control Enable" "0,1" bitfld.long 0x00 1. " TFE ,Transmit Flow Control Enable" "0,1" bitfld.long 0x00 0. " FCBBPA ,Initiate Pause Control Frame" "0,1" group.long 0x1C++0x3 line.long 0x00 "EMAC1_VLANTAG,EMAC1 VLAN Tag Register" bitfld.long 0x00 19. " VTHM ,VLAN Tag Hash Table Match Enable" "0,1" bitfld.long 0x00 18. " ESVL ,Enable S-VLAN" "0,1" bitfld.long 0x00 17. " VTIM ,VLAN Tag Inverse Match Enable" "0,1" bitfld.long 0x00 16. " ETV ,Enable Tag VLAN Comparison" "0,1" newline hexmask.long.word 0x00 0.--15. 1. " VL ,VLAN Tag Id Receive Frames" group.long 0x24++0x3 line.long 0x00 "EMAC1_DBG,EMAC1 Debug Register" bitfld.long 0x00 25. " TXFIFOFULL ,Tx FIFO Full" "0,1" bitfld.long 0x00 24. " TXFIFONE ,Tx FIFO Not Empty" "0,1" bitfld.long 0x00 22. " TXFIFOACT ,Tx FIFO Active" "0,1" bitfld.long 0x00 20.--21. " TXFIFOCTLST ,Tx FIFO Controller State" "0,1,2,3" newline bitfld.long 0x00 19. " TXPAUSE ,Tx Paused" "0,1" bitfld.long 0x00 17.--18. " TXFRCTL ,Tx Frame Controller State" "0,1,2,3" bitfld.long 0x00 16. " MMTEA ,MM Tx Engine Active" "0,1" bitfld.long 0x00 8.--9. " RXFIFOST ,Rx FIFO State" "0,1,2,3" newline bitfld.long 0x00 5.--6. " RXFIFOCTLST ,Rx FIFO Controller State" "0,1,2,3" bitfld.long 0x00 4. " RXFIFOACT ,Rx FIFO Active" "0,1" bitfld.long 0x00 1.--2. " SFIFOST ,Small FIFO State" "0,1,2,3" bitfld.long 0x00 0. " MMREA ,MM Rx Engine Active" "0,1" group.long 0x38++0x3 line.long 0x00 "EMAC1_ISTAT,EMAC1 Interrupt Status Register" bitfld.long 0x00 9. " TS ,Time Stamp Interrupt Status" "0,1" bitfld.long 0x00 7. " MMCRC ,MMC Receive Checksum Offload Interrupt Status" "0,1" bitfld.long 0x00 6. " MMCTX ,MMC Transmit Interrupt Status" "0,1" bitfld.long 0x00 5. " MMCRX ,MMC Receive Interrupt Status" "0,1" newline bitfld.long 0x00 4. " MMC ,MMC Interrupt Status" "0,1" group.long 0x3C++0x3 line.long 0x00 "EMAC1_IMSK,EMAC1 Interrupt Mask Register" bitfld.long 0x00 9. " TS ,Time Stamp Interrupt Mask" "0,1" group.long 0x40++0x3 line.long 0x00 "EMAC1_ADDR0_HI,EMAC1 MAC Address 0 High Register" hexmask.long.word 0x00 0.--15. 1. " ADDR ,Address" group.long 0x44++0x3 line.long 0x00 "EMAC1_ADDR0_LO,EMAC1 MAC Address 0 Low Register" group.long 0x48++0x3 line.long 0x00 "EMAC1_ADDR1_HI,EMAC1 MAC Address 1 High Register" bitfld.long 0x00 31. " AE ,Address Enable" "0,1" bitfld.long 0x00 30. " SA ,Source Address" "0,1" bitfld.long 0x00 24.--29. " MBC ,Mask byte control" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 0.--15. 1. " ADDRHI ,Mac address" group.long 0x4C++0x3 line.long 0x00 "EMAC1_ADDR1_LO,EMAC1 MAC Address 1 Low Register" group.long 0xDC++0x3 line.long 0x00 "EMAC1_WDOG_TIMOUT,EMAC1 Watchdog Timeout Register" bitfld.long 0x00 16. " PWE ,Programmable Watchdog Enable" "0,1" hexmask.long.word 0x00 0.--13. 1. " WTO ,Watchdog Timeout" group.long 0x100++0x3 line.long 0x00 "EMAC1_MMC_CTL,EMAC1 MMC Control Register" bitfld.long 0x00 5. " FULLPSET ,Full Preset" "0,1" bitfld.long 0x00 4. " CNTRPSET ,Counter Reset/Preset" "0,1" bitfld.long 0x00 3. " CNTRFRZ ,Counter Freeze" "0,1" bitfld.long 0x00 2. " RDRST ,Read Reset" "0,1" newline bitfld.long 0x00 1. " NOROLL ,No Rollover" "0,1" bitfld.long 0x00 0. " RST ,Reset" "0,1" group.long 0x104++0x3 line.long 0x00 "EMAC1_MMC_RXINT,EMAC1 MMC Rx Interrupt Register" bitfld.long 0x00 25. " RXCTLFIS ,Rx Control Frame Counter Interrupt Status" "0,1" bitfld.long 0x00 24. " RXRCVERRFIS ,Rx Error Frame Counter Interrupt Status" "0,1" bitfld.long 0x00 23. " WDOGERR ,Rx Watch Dog Error Count Half/Full" "0,1" bitfld.long 0x00 22. " VLANFRGB ,Rx VLAN Frames (Good/Bad) Count Half/Full" "0,1" newline bitfld.long 0x00 21. " FIFOOVF ,Rx FIFO Overflow Count Half/Full" "0,1" bitfld.long 0x00 20. " PAUSEFR ,Rx Pause Frames Count Half/Full" "0,1" bitfld.long 0x00 19. " OUTRANGE ,Rx Out Of Range Type Count Half/Full" "0,1" bitfld.long 0x00 18. " LENERR ,Rx Length Error Count Half/Full" "0,1" newline bitfld.long 0x00 17. " UCASTG ,Rx Unicast Frames (Good) Count Half/Full" "0,1" bitfld.long 0x00 16. " R1024TOMAX ,Rx 1024-to-max Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 15. " R512TO1023 ,Rx 512-to-1023 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 14. " R256TO511 ,Rx 255-to-511 Octets (Good/Bad) Count Half/Full" "0,1" newline bitfld.long 0x00 13. " R128TO255 ,Rx 128-to-255 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 12. " R65TO127 ,Rx 65-to-127 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 11. " R64 ,Rx 64 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 10. " OSIZEG ,Rx Oversize (Good) Count Half/Full" "0,1" newline bitfld.long 0x00 9. " USIZEG ,Rx Undersize (Good) Count Half/Full" "0,1" bitfld.long 0x00 8. " JABERR ,Rx Jabber Error Count Half/Full" "0,1" bitfld.long 0x00 7. " RUNTERR ,Rx Runt Error Count Half/Full" "0,1" bitfld.long 0x00 6. " ALIGNERR ,Rx Alignment Error Count Half/Full" "0,1" newline bitfld.long 0x00 5. " CRCERR ,Rx CRC Error Counter Half/Full" "0,1" bitfld.long 0x00 4. " MCASTG ,Rx Multicast Count (Good) Half/Full" "0,1" bitfld.long 0x00 3. " BCASTG ,Rx Broadcast Count (Good) Half/Full" "0,1" bitfld.long 0x00 2. " OCTCNTG ,Octet Count (Good) Half/Full" "0,1" newline bitfld.long 0x00 1. " OCTCNTGB ,Octet Count (Good/Bad) Half/Full" "0,1" bitfld.long 0x00 0. " FRCNTGB ,Frame Count (Good/Bad) Half/Full" "0,1" group.long 0x108++0x3 line.long 0x00 "EMAC1_MMC_TXINT,EMAC1 MMC Tx Interrupt Register" bitfld.long 0x00 25. " TXOSIZEGFIS ,Tx Oversize Good Frame Count Interrupt Status" "0,1" bitfld.long 0x00 24. " VLANFRGB ,Tx VLAN Frames (Good) Count Half/Full" "0,1" bitfld.long 0x00 23. " PAUSEFRM ,Tx Pause Frames Count Half/Full" "0,1" bitfld.long 0x00 22. " EXCESSDEF ,Tx Excess Deferred Count Half/Full" "0,1" newline bitfld.long 0x00 21. " FRCNTG ,Tx Frame Count (Good) Count Half/Full" "0,1" bitfld.long 0x00 20. " OCTCNTG ,Tx Octet Count (Good) Count Half/Full" "0,1" bitfld.long 0x00 19. " CARRERR ,Tx Carrier Error Count Half/Full" "0,1" bitfld.long 0x00 18. " EXCESSCOL ,Tx Excess Collision Count Half/Full" "0,1" newline bitfld.long 0x00 17. " LATECOL ,Tx Late Collision Count Half/Full" "0,1" bitfld.long 0x00 16. " DEFERRED ,Tx Deferred Count Half/Full" "0,1" bitfld.long 0x00 15. " MULTCOLG ,Tx Multiple collision (Good) Count Half/Full" "0,1" bitfld.long 0x00 14. " SNGCOLG ,Tx Single Collision (Good) Count Half/Full" "0,1" newline bitfld.long 0x00 13. " UNDERR ,Tx Underflow Error Count Half/Full" "0,1" bitfld.long 0x00 12. " BCASTGB ,Tx Broadcast Frames (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 11. " MCASTGB ,Tx Multicast Frames (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 10. " UCASTGB ,Tx Unicast Frames (Good/Bad) Count Half/Full" "0,1" newline bitfld.long 0x00 9. " T1024TOMAX ,Tx 1024-to-max Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 8. " T512TO1023 ,Tx 512-to-1023 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 7. " T256TO511 ,Tx 256-to-511 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 6. " T128TO255 ,Tx 128-to-255 Octets (Good/Bad) Count Half/Full" "0,1" newline bitfld.long 0x00 5. " T65TO127 ,Tx 65-to-127 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 4. " T64 ,Tx 64 Octets (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 3. " MCASTG ,Tx Multicast Frames (Good) Count Half/Full" "0,1" bitfld.long 0x00 2. " BCASTG ,Tx Broadcast Frames (Good) Count Half/Full" "0,1" newline bitfld.long 0x00 1. " FRCNTGB ,Tx Frame Count (Good/Bad) Count Half/Full" "0,1" bitfld.long 0x00 0. " OCTCNTGB ,Tx Octet Count (Good/Bad) Count Half/Full" "0,1" group.long 0x10C++0x3 line.long 0x00 "EMAC1_MMC_RXIMSK,EMAC1 MMC Rx Interrupt Mask Register" bitfld.long 0x00 25. " CTLFIM ,Rx Control Frame Counter Interrupt Mask" "0,1" bitfld.long 0x00 24. " RCVERRFIM ,Rx Error Frame Counter Interrupt Mask" "0,1" bitfld.long 0x00 23. " WATCHERR ,Rx Watch Dog Error Count Half/Full Mask" "0,1" bitfld.long 0x00 22. " VLANFRGB ,Rx VLAN Frames (Good/Bad) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 21. " FIFOOV ,Rx FIFO Overflow Count Half/Full Mask" "0,1" bitfld.long 0x00 20. " PAUSEFRM ,Rx Pause Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 19. " OUTRANGE ,Rx Out Of Range Type Count Half/Full Mask" "0,1" bitfld.long 0x00 18. " LENERR ,Rx Length Error Count Half/Full Mask" "0,1" newline bitfld.long 0x00 17. " UCASTG ,Rx Unicast Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 16. " R1024TOMAX ,Rx 1024-to-max Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 15. " R512TO1023 ,Rx 512-to-1023 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 14. " R256TO511 ,Rx 255-to-511 Octets (Good/Bad) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 13. " R128TO255 ,Rx 128-to-255 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 12. " R65TO127 ,Rx 65-to-127 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 11. " R64 ,Rx 64 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 10. " OSIZEG ,Rx Oversize (Good) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 9. " USIZEG ,Rx Undersize (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 8. " JABERR ,Rx Jabber Error Count Half/Full Mask" "0,1" bitfld.long 0x00 7. " RUNTERR ,Rx Runt Error Count Half/Full Mask" "0,1" bitfld.long 0x00 6. " ALIGNERR ,Rx Alignment Error Count Half/Full Mask" "0,1" newline bitfld.long 0x00 5. " CRCERR ,Rx CRC Error Count Half/Full Mask" "0,1" bitfld.long 0x00 4. " MCASTG ,Rx Multicast Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 3. " BCASTG ,Rx Broadcast Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 2. " OCTCNTG ,Rx Octet Count (Good) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 1. " OCTCNTGB ,Rx Octet Count (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 0. " FRCNTGB ,Rx Frame Count (Good/Bad) Count Half/Full Mask" "0,1" group.long 0x110++0x3 line.long 0x00 "EMAC1_MMC_TXIMSK,EMAC1 MMC TX Interrupt Mask Register" bitfld.long 0x00 25. " OSZGFIM ,Tx Oversize Good Frame Count Interrupt Mask" "0,1" bitfld.long 0x00 24. " VLANFRG ,Tx VLAN Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 23. " PAUSEFRM ,Tx Pause Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 22. " EXCESSDEF ,Tx Excess Deferred Count Half/Full Mask" "0,1" newline bitfld.long 0x00 21. " FRCNTG ,Tx Frame Count (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 20. " OCTCNTG ,Tx Octet Count (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 19. " CARRERR ,Tx Carrier Error Count Half/Full Mask" "0,1" bitfld.long 0x00 18. " EXCESSCOL ,Tx Excess collision Count Half/Full Mask" "0,1" newline bitfld.long 0x00 17. " LATECOL ,Tx Late Collision Count Half/Full Mask" "0,1" bitfld.long 0x00 16. " DEFERRED ,Tx Deferred Count Half/Full Mask" "0,1" bitfld.long 0x00 15. " MULTCOLG ,Tx Multiple Collisions (Good) Count Mask" "0,1" bitfld.long 0x00 14. " SNGCOLG ,Tx Single Collision (Good) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 13. " UNDERR ,Tx Underflow Error Count Half/Full Mask" "0,1" bitfld.long 0x00 12. " BCASTGB ,Tx Broadcast Frames (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 11. " MCASTGB ,Tx Multicast Frames (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 10. " UCASTGB ,Tx Unicast Frames (Good/Bad) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 9. " T1024TOMAX ,Tx 1024-to-max Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 8. " T512TO1023 ,Tx 512-to-1023 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 7. " T256TO511 ,Tx 256-to-511 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 6. " T128TO255 ,Tx 128-to-255 Octets (Good/Bad) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 5. " T65TO127 ,Tx 65-to-127 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 4. " T64 ,Tx 64 Octets (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 3. " MCASTG ,Tx Multicast Frames (Good) Count Half/Full Mask" "0,1" bitfld.long 0x00 2. " BCASTG ,Tx Broadcast Frames (Good) Count Half/Full Mask" "0,1" newline bitfld.long 0x00 1. " FRCNTGB ,Tx Frame Count (Good/Bad) Count Half/Full Mask" "0,1" bitfld.long 0x00 0. " OCTCNTGB ,Tx Octet Count (Good/Bad) Count Half/Full Mask" "0,1" group.long 0x114++0x3 line.long 0x00 "EMAC1_TXOCTCNT_GB,EMAC1 Tx OCT Count (Good/Bad) Register" group.long 0x118++0x3 line.long 0x00 "EMAC1_TXFRMCNT_GB,EMAC1 Tx Frame Count (Good/Bad) Register" group.long 0x11C++0x3 line.long 0x00 "EMAC1_TXBCASTFRM_G,EMAC1 Tx Broadcast Frames (Good) Register" group.long 0x120++0x3 line.long 0x00 "EMAC1_TXMCASTFRM_G,EMAC1 Tx Multicast Frames (Good) Register" group.long 0x124++0x3 line.long 0x00 "EMAC1_TX64_GB,EMAC1 Tx 64-Byte Frames (Good/Bad) Register" group.long 0x128++0x3 line.long 0x00 "EMAC1_TX65TO127_GB,EMAC1 Tx 65- to 127-Byte Frames (Good/Bad) Register" group.long 0x12C++0x3 line.long 0x00 "EMAC1_TX128TO255_GB,EMAC1 Tx 128- to 255-Byte Frames (Good/Bad) Register" group.long 0x130++0x3 line.long 0x00 "EMAC1_TX256TO511_GB,EMAC1 Tx 256- to 511-Byte Frames (Good/Bad) Register" group.long 0x134++0x3 line.long 0x00 "EMAC1_TX512TO1023_GB,EMAC1 Tx 512- to 1023-Byte Frames (Good/Bad) Register" group.long 0x138++0x3 line.long 0x00 "EMAC1_TX1024TOMAX_GB,EMAC1 Tx 1024- to Max-Byte Frames (Good/Bad) Register" group.long 0x13C++0x3 line.long 0x00 "EMAC1_TXUCASTFRM_GB,EMAC1 Tx Unicast Frames (Good/Bad) Register" group.long 0x140++0x3 line.long 0x00 "EMAC1_TXMCASTFRM_GB,EMAC1 Tx Multicast Frames (Good/Bad) Register" group.long 0x144++0x3 line.long 0x00 "EMAC1_TXBCASTFRM_GB,EMAC1 Tx Broadcast Frames (Good/Bad) Register" group.long 0x148++0x3 line.long 0x00 "EMAC1_TXUNDR_ERR,EMAC1 Tx Underflow Error Register" group.long 0x14C++0x3 line.long 0x00 "EMAC1_TXSNGCOL_G,EMAC1 Tx Single Collision (Good) Register" group.long 0x150++0x3 line.long 0x00 "EMAC1_TXMULTCOL_G,EMAC1 Tx Multiple Collision (Good) Register" group.long 0x154++0x3 line.long 0x00 "EMAC1_TXDEFERRED,EMAC1 Tx Deferred Register" group.long 0x158++0x3 line.long 0x00 "EMAC1_TXLATECOL,EMAC1 Tx Late Collision Register" group.long 0x15C++0x3 line.long 0x00 "EMAC1_TXEXCESSCOL,EMAC1 Tx Excess Collision Register" group.long 0x160++0x3 line.long 0x00 "EMAC1_TXCARR_ERR,EMAC1 Tx Carrier Error Register" group.long 0x164++0x3 line.long 0x00 "EMAC1_TXOCTCNT_G,EMAC1 Tx Octet Count (Good) Register" group.long 0x168++0x3 line.long 0x00 "EMAC1_TXFRMCNT_G,EMAC1 Tx Frame Count (Good) Register" group.long 0x16C++0x3 line.long 0x00 "EMAC1_TXEXCESSDEF,EMAC1 Tx Excess Deferral Register" group.long 0x170++0x3 line.long 0x00 "EMAC1_TXPAUSEFRM,EMAC1 Tx Pause Frame Register" group.long 0x174++0x3 line.long 0x00 "EMAC1_TXVLANFRM_G,EMAC1 Tx VLAN Frames (Good) Register" group.long 0x178++0x3 line.long 0x00 "EMAC1_TXOVRSIZE_G,EMAC1 Number of Tx Frames (Good) greater than maxsize" group.long 0x180++0x3 line.long 0x00 "EMAC1_RXFRMCNT_GB,EMAC1 Rx Frame Count (Good/Bad) Register" group.long 0x184++0x3 line.long 0x00 "EMAC1_RXOCTCNT_GB,EMAC1 Rx Octet Count (Good/Bad) Register" group.long 0x188++0x3 line.long 0x00 "EMAC1_RXOCTCNT_G,EMAC1 Rx Octet Count (Good) Register" group.long 0x18C++0x3 line.long 0x00 "EMAC1_RXBCASTFRM_G,EMAC1 Rx Broadcast Frames (Good) Register" group.long 0x190++0x3 line.long 0x00 "EMAC1_RXMCASTFRM_G,EMAC1 Rx Multicast Frames (Good) Register" group.long 0x194++0x3 line.long 0x00 "EMAC1_RXCRC_ERR,EMAC1 Rx CRC Error Register" group.long 0x198++0x3 line.long 0x00 "EMAC1_RXALIGN_ERR,EMAC1 Rx alignment Error Register" group.long 0x19C++0x3 line.long 0x00 "EMAC1_RXRUNT_ERR,EMAC1 Rx Runt Error Register" group.long 0x1A0++0x3 line.long 0x00 "EMAC1_RXJAB_ERR,EMAC1 Rx Jab Error Register" group.long 0x1A4++0x3 line.long 0x00 "EMAC1_RXUSIZE_G,EMAC1 Rx Undersize (Good) Register" group.long 0x1A8++0x3 line.long 0x00 "EMAC1_RXOSIZE_G,EMAC1 Rx Oversize (Good) Register" group.long 0x1AC++0x3 line.long 0x00 "EMAC1_RX64_GB,EMAC1 Rx 64-Byte Frames (Good/Bad) Register" group.long 0x1B0++0x3 line.long 0x00 "EMAC1_RX65TO127_GB,EMAC1 Rx 65- to 127-Byte Frames (Good/Bad) Register" group.long 0x1B4++0x3 line.long 0x00 "EMAC1_RX128TO255_GB,EMAC1 Rx 128- to 255-Byte Frames (Good/Bad) Register" group.long 0x1B8++0x3 line.long 0x00 "EMAC1_RX256TO511_GB,EMAC1 Rx 256- to 511-Byte Frames (Good/Bad) Register" group.long 0x1BC++0x3 line.long 0x00 "EMAC1_RX512TO1023_GB,EMAC1 Rx 512- to 1023-Byte Frames (Good/Bad) Register" group.long 0x1C0++0x3 line.long 0x00 "EMAC1_RX1024TOMAX_GB,EMAC1 Rx 1024- to Max-Byte Frames (Good/Bad) Register" group.long 0x1C4++0x3 line.long 0x00 "EMAC1_RXUCASTFRM_G,EMAC1 Rx Unicast Frames (Good) Register" group.long 0x1C8++0x3 line.long 0x00 "EMAC1_RXLEN_ERR,EMAC1 Rx Length Error Register" group.long 0x1CC++0x3 line.long 0x00 "EMAC1_RXOORTYPE,EMAC1 Rx Out Of Range Type Register" group.long 0x1D0++0x3 line.long 0x00 "EMAC1_RXPAUSEFRM,EMAC1 Rx Pause Frames Register" group.long 0x1D4++0x3 line.long 0x00 "EMAC1_RXFIFO_OVF,EMAC1 Rx FIFO Overflow Register" group.long 0x1D8++0x3 line.long 0x00 "EMAC1_RXVLANFRM_GB,EMAC1 Rx VLAN Frames (Good/Bad) Register" group.long 0x1DC++0x3 line.long 0x00 "EMAC1_RXWDOG_ERR,EMAC1 Rx Watch Dog Error Register" group.long 0x1E0++0x3 line.long 0x00 "EMAC1_RXRCV_ERR,EMAC1 Rx Error Frames Received Register" group.long 0x1E4++0x3 line.long 0x00 "EMAC1_RXCTLFRM_G,EMAC1 Rx Good Control Frames Register" group.long 0x200++0x3 line.long 0x00 "EMAC1_IPC_RXIMSK,EMAC1 MMC IPC Rx Interrupt Mask Register" bitfld.long 0x00 29. " ICMPERROCT ,Rx ICMP Error Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 28. " ICMPGOCT ,Rx ICMP (Good) Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 27. " TCPERROCT ,Rx TCP Error Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 26. " TCPGOCT ,Rx TCP (Good) Octets Count Half/Full Mask" "0,1" newline bitfld.long 0x00 25. " UDPERROCT ,Rx UDP Error Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 24. " UDPGOCT ,Rx UDP (Good) Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 23. " V6NOPAYOCT ,Rx IPv6 No Payload Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 22. " V6HDERROCT ,Rx IPv6 Header Error Octets Count Half/Full Mask" "0,1" newline bitfld.long 0x00 21. " V6GOCT ,Rx IPv6 (Good) Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 20. " V4UDSBLOCT ,Rx IPv4 UDS Disable Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 19. " V4FRAGOCT ,Rx IPv4 Fragmented Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 18. " V4NOPAYOCT ,Rx IPv4 No Payload Octets Count Half/Full Mask" "0,1" newline bitfld.long 0x00 17. " V4HDERROCT ,Rx IPv4 Header Error Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 16. " V4GOCT ,Rx IPv4 (Good) Octets Count Half/Full Mask" "0,1" bitfld.long 0x00 13. " ICMPERRFRM ,Rx ICMP Error Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 12. " ICMPGFRM ,Rx ICMP (Good) Frames Count Half/Full Mask" "0,1" newline bitfld.long 0x00 11. " TCPERRFRM ,Rx TCP Error Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 10. " TCPGFRM ,Rx TCP (Good) Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 9. " UDPERRFRM ,Rx UDP Error Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 8. " UDPGFRM ,Rx UDP (Good) Frames Count Half/Full Mask" "0,1" newline bitfld.long 0x00 7. " V6NOPAYFRM ,Rx IPv6 No Payload Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 6. " V6HDERRFRM ,Rx IPv6 Header Error Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 5. " V6GFRM ,Rx IPv6 (Good) Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 4. " V4UDSBLFRM ,Rx IPv4 UDS Disable Frames Count Half/Full Mask" "0,1" newline bitfld.long 0x00 3. " V4FRAGFRM ,Rx IPv4 Fragmented Frames Count Half/Full Mask" "0,1" bitfld.long 0x00 2. " V4NOPAYFRM ,Rx IPv4 No Payload Frame Count Half/Full Mask" "0,1" bitfld.long 0x00 1. " V4HDERRFRM ,Rx IPv4 Header Error Frame Count Half/Full Mask" "0,1" bitfld.long 0x00 0. " V4GFRM ,Rx IPv4 (Good) Frames Count Half/Full Mask" "0,1" group.long 0x208++0x3 line.long 0x00 "EMAC1_IPC_RXINT,EMAC1 MMC IPC Rx Interrupt Register" bitfld.long 0x00 29. " ICMPERROCT ,Rx ICMP Error Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 28. " ICMPGOCT ,Rx ICMP (Good) Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 27. " TCPERROCT ,Rx TCP Error Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 26. " TCPGOCT ,Rx TCP (Good) Octets Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 25. " UDPERROCT ,Rx UDP Error Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 24. " UDPGOCT ,Rx UDP (Good) Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 23. " V6NOPAYOCT ,Rx IPv6 No Payload Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 22. " V6HDERROCT ,Rx IPv6 Header Error Octets Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 21. " V6GOCT ,Rx IPv6 (Good) Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 20. " V4UDSBLOCT ,Rx IPv4 UDS Disable Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 19. " V4FRAGOCT ,Rx IPv4 Fragmented Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 18. " V4NOPAYOCT ,Rx IPv4 No Payload Octets Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 17. " V4HDERROCT ,Rx IPv4 Header Error Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 16. " V4GOCT ,Rx IPv4 (Good) Octets Count Half/Full Interrupt" "0,1" bitfld.long 0x00 13. " ICMPERRFRM ,Rx ICMP Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 12. " ICMPGFRM ,Rx ICMP (Good) Frames Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 11. " TCPERRFRM ,Rx TCP Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 10. " TCPGFRM ,Rx TCP (Good) Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 9. " UDPERRFRM ,Rx IDP Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 8. " UDPGFRM ,Rx UDP (Good) Frames Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 7. " V6NOPAYFRM ,Rx IPv6 No Payload Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 6. " V6HDERRFRM ,Rx IPv6 Header Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 5. " V6GFRM ,Rx IPv6 (Good) Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 4. " V4UDSBLFRM ,Rx IPv4 UDS Disable Frames Count Half/Full Interrupt" "0,1" newline bitfld.long 0x00 3. " V4FRAGFRM ,Rx IPv4 Fragmented Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 2. " V4NOPAYFRM ,Rx IPv4 No Payload Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 1. " V4HDERRFRM ,Rx IPv4 Header Error Frames Count Half/Full Interrupt" "0,1" bitfld.long 0x00 0. " V4GFRM ,Rx IPv4 (Good) Frames Count Half/Full Interrupt" "0,1" group.long 0x210++0x3 line.long 0x00 "EMAC1_RXIPV4_GD_FRM,EMAC1 Rx IPv4 Datagrams (Good) Register" group.long 0x214++0x3 line.long 0x00 "EMAC1_RXIPV4_HDR_ERR_FRM,EMAC1 Rx IPv4 Datagrams Header Errors Register" group.long 0x218++0x3 line.long 0x00 "EMAC1_RXIPV4_NOPAY_FRM,EMAC1 Rx IPv4 Datagrams No Payload Frame Register" group.long 0x21C++0x3 line.long 0x00 "EMAC1_RXIPV4_FRAG_FRM,EMAC1 Rx IPv4 Datagrams Fragmented Frames Register" group.long 0x220++0x3 line.long 0x00 "EMAC1_RXIPV4_UDSBL_FRM,EMAC1 Rx IPv4 UDP Disabled Frames Register" group.long 0x224++0x3 line.long 0x00 "EMAC1_RXIPV6_GD_FRM,EMAC1 Rx IPv6 Datagrams Good Frames Register" group.long 0x228++0x3 line.long 0x00 "EMAC1_RXIPV6_HDR_ERR_FRM,EMAC1 Rx IPv6 Datagrams Header Error Frames Register" group.long 0x22C++0x3 line.long 0x00 "EMAC1_RXIPV6_NOPAY_FRM,EMAC1 Rx IPv6 Datagrams No Payload Frames Register" group.long 0x230++0x3 line.long 0x00 "EMAC1_RXUDP_GD_FRM,EMAC1 Rx UDP Good Frames Register" group.long 0x234++0x3 line.long 0x00 "EMAC1_RXUDP_ERR_FRM,EMAC1 Rx UDP Error Frames Register" group.long 0x238++0x3 line.long 0x00 "EMAC1_RXTCP_GD_FRM,EMAC1 Rx TCP Good Frames Register" group.long 0x23C++0x3 line.long 0x00 "EMAC1_RXTCP_ERR_FRM,EMAC1 Rx TCP Error Frames Register" group.long 0x240++0x3 line.long 0x00 "EMAC1_RXICMP_GD_FRM,EMAC1 Rx ICMP Good Frames Register" group.long 0x244++0x3 line.long 0x00 "EMAC1_RXICMP_ERR_FRM,EMAC1 Rx ICMP Error Frames Register" group.long 0x250++0x3 line.long 0x00 "EMAC1_RXIPV4_GD_OCT,EMAC1 Rx IPv4 Datagrams Good Octets Register" group.long 0x254++0x3 line.long 0x00 "EMAC1_RXIPV4_HDR_ERR_OCT,EMAC1 Rx IPv4 Datagrams Header Errors Register" group.long 0x258++0x3 line.long 0x00 "EMAC1_RXIPV4_NOPAY_OCT,EMAC1 Rx IPv4 Datagrams No Payload Octets Register" group.long 0x25C++0x3 line.long 0x00 "EMAC1_RXIPV4_FRAG_OCT,EMAC1 Rx IPv4 Datagrams Fragmented Octets Register" group.long 0x260++0x3 line.long 0x00 "EMAC1_RXIPV4_UDSBL_OCT,EMAC1 Rx IPv4 UDP Disabled Octets Register" group.long 0x264++0x3 line.long 0x00 "EMAC1_RXIPV6_GD_OCT,EMAC1 Rx IPv6 Good Octets Register" group.long 0x268++0x3 line.long 0x00 "EMAC1_RXIPV6_HDR_ERR_OCT,EMAC1 Rx IPv6 Header Errors Register" group.long 0x26C++0x3 line.long 0x00 "EMAC1_RXIPV6_NOPAY_OCT,EMAC1 Rx IPv6 No Payload Octets Register" group.long 0x270++0x3 line.long 0x00 "EMAC1_RXUDP_GD_OCT,EMAC1 Rx UDP Good Octets Register" group.long 0x274++0x3 line.long 0x00 "EMAC1_RXUDP_ERR_OCT,EMAC1 Rx UDP Error Octets Register" group.long 0x278++0x3 line.long 0x00 "EMAC1_RXTCP_GD_OCT,EMAC1 Rx TCP Good Octets Register" group.long 0x27C++0x3 line.long 0x00 "EMAC1_RXTCP_ERR_OCT,EMAC1 Rx TCP Error Octets Register" group.long 0x280++0x3 line.long 0x00 "EMAC1_RXICMP_GD_OCT,EMAC1 Rx ICMP Good Octets Register" group.long 0x284++0x3 line.long 0x00 "EMAC1_RXICMP_ERR_OCT,EMAC1 Rx ICMP Error Octets Register" group.long 0x400++0x3 line.long 0x00 "EMAC1_L3L4_CTL,EMAC1 Layer3 and Layer4 Control Register" bitfld.long 0x00 21. " L4DPIM ,Layer 4 Destination Port Inverse Matching" "0,1" bitfld.long 0x00 20. " L4DPM ,Layer 4 Destination Port Matching" "0,1" bitfld.long 0x00 19. " L4SPIM ,Layer 4 Source Port Inverse Matching" "0,1" bitfld.long 0x00 18. " L4SPM ,Layer 4 Source Port Matching" "0,1" newline bitfld.long 0x00 16. " L4PEN ,Layer 4 Filtering Enable" "0,1" bitfld.long 0x00 11.--15. " L3HDBM ,Layer 3 Destination Address Bits Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6.--10. " L3HSBM ,Layer 3 Source Address Bits Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " L3DAIM ,Layer 3 Destination Address Inverse Matching" "0,1" newline bitfld.long 0x00 4. " L3DAM ,Layer 3 Destination Address Matching" "0,1" bitfld.long 0x00 3. " L3SAIM ,Layer 3 Source Address Inverse Matching" "0,1" bitfld.long 0x00 2. " L3SAM ,Layer 3 Source Address Matching" "0,1" bitfld.long 0x00 0. " L3PEN ,Layer 3 Enabled" "0,1" group.long 0x404++0x3 line.long 0x00 "EMAC1_L4_ADDR,EMAC1 Layer 4 Address Register" hexmask.long.word 0x00 16.--31. 1. " L4DP ,Layer 4 Destination Port" hexmask.long.word 0x00 0.--15. 1. " L4SP ,Layer 4 Source Port" group.long 0x410++0x3 line.long 0x00 "EMAC1_L3_ADDR0,EMAC1 Layer 3 Address0 Register" group.long 0x414++0x3 line.long 0x00 "EMAC1_L3_ADDR1,EMAC1 Layer 3 Address1 Register" group.long 0x418++0x3 line.long 0x00 "EMAC1_L3_ADDR2,EMAC1 Layer 3 Address2 Register" group.long 0x41C++0x3 line.long 0x00 "EMAC1_L3_ADDR3,EMAC1 Layer 3 Address3 Register" group.long 0x584++0x3 line.long 0x00 "EMAC1_VLAN_INCL,EMAC1 VLAN Tag Inclusion or Replacement Register" bitfld.long 0x00 19. " CSVL ,C-VLAN or S-VLAN" "0,1" bitfld.long 0x00 18. " VLP ,VLAN Priority Control" "0,1" bitfld.long 0x00 16.--17. " VLC ,VLAN Tag Control in Transmit Frames" "0,1,2,3" hexmask.long.word 0x00 0.--15. 1. " VLT ,VLAN Tag for Transmit Frames" group.long 0x588++0x3 line.long 0x00 "EMAC1_VLAN_HSHTBL,EMAC1 VLAN Hash Table Register" hexmask.long.word 0x00 0.--15. 1. " VLHT ,VLAN Hash Table" group.long 0x760++0x3 line.long 0x00 "EMAC1_TM_PPS0INTVL,EMAC1 Time Stamp PPS Interval Register" group.long 0x764++0x3 line.long 0x00 "EMAC1_TM_PPS0WIDTH,EMAC1 PPS Width Register" group.long 0x1000++0x3 line.long 0x00 "EMAC1_DMA0_BUSMODE,EMAC1 DMA Bus Mode Register" bitfld.long 0x00 25. " AAL ,Address Aligned Bursts" "0,1" bitfld.long 0x00 24. " PBL8 ,PBL * 8" "0,1" bitfld.long 0x00 23. " USP ,Use Separate PBL" "0,1" bitfld.long 0x00 17.--22. " RPBL ,Receive Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 16. " FB ,Fixed Burst" "0,1" bitfld.long 0x00 8.--13. " PBL ,Programmable Burst Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. " ATDS ,Alternate Descriptor Size" "0,1" bitfld.long 0x00 2.--6. " DSL ,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 0. " SWR ,Software Reset" "0,1" group.long 0x1004++0x3 line.long 0x00 "EMAC1_DMA0_TXPOLL,EMAC1 DMA Tx Poll Demand Register" group.long 0x1008++0x3 line.long 0x00 "EMAC1_DMA0_RXPOLL,EMAC1 DMA Rx Poll Demand register" group.long 0x100C++0x3 line.long 0x00 "EMAC1_DMA0_RXDSC_ADDR,EMAC1 DMA Rx Descriptor List Address Register" group.long 0x1010++0x3 line.long 0x00 "EMAC1_DMA0_TXDSC_ADDR,EMAC1 DMA Tx Descriptor List Address Register" group.long 0x1014++0x3 line.long 0x00 "EMAC1_DMA0_STAT,EMAC1 DMA Status Register" bitfld.long 0x00 29. " TTI ,Time Stamp Trigger Interrupt" "0,1" bitfld.long 0x00 27. " MCI ,MAC MMC Interrupt" "0,1" bitfld.long 0x00 23.--25. " EB ,Error Bits" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20.--22. " TS ,Tx Process State" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 17.--19. " RS ,Rx Process State" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16. " NIS ,Normal Interrupt Summary" "0,1" bitfld.long 0x00 15. " AIS ,Abnormal Interrupt Summary" "0,1" bitfld.long 0x00 14. " ERI ,Early Receive Interrupt" "0,1" newline bitfld.long 0x00 13. " FBI ,Fatal Bus Error Interrupt" "0,1" bitfld.long 0x00 10. " ETI ,Early Transmit Interrupt" "0,1" bitfld.long 0x00 9. " RWT ,Receive WatchDog Timeout" "0,1" bitfld.long 0x00 8. " RPS ,Receive Process Stopped" "0,1" newline bitfld.long 0x00 7. " RU ,Receive Buffer Unavailable" "0,1" bitfld.long 0x00 6. " RI ,Receive Interrupt" "0,1" bitfld.long 0x00 5. " UNF ,Transmit Buffer Underflow" "0,1" bitfld.long 0x00 4. " OVF ,Receive Buffer Overflow" "0,1" newline bitfld.long 0x00 3. " TJT ,Transmit Jabber Timeout" "0,1" bitfld.long 0x00 2. " TU ,Transmit Buffer Unavailable" "0,1" bitfld.long 0x00 1. " TPS ,Transmit Process Stopped" "0,1" bitfld.long 0x00 0. " TI ,Transmit Interrupt" "0,1" group.long 0x1018++0x3 line.long 0x00 "EMAC1_DMA0_OPMODE,EMAC1 DMA Operation Mode Register" bitfld.long 0x00 26. " DT ,Disable Dropping TCP/IP Errors" "0,1" bitfld.long 0x00 25. " RSF ,Receive Store and Forward" "0,1" bitfld.long 0x00 24. " DFF ,Disable Flushing of received Frames" "0,1" bitfld.long 0x00 21. " TSF ,Transmit Store and Forward" "0,1" newline bitfld.long 0x00 20. " FTF ,Flush Transmit FIFO" "0,1" bitfld.long 0x00 14.--16. " TTC ,Transmit Threshold Control" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13. " ST ,Start/Stop Transmission" "0,1" bitfld.long 0x00 7. " FEF ,Forward Error Frames" "0,1" newline bitfld.long 0x00 6. " FUF ,Forward Undersized good Frames" "0,1" bitfld.long 0x00 5. " DGF ,Drop Gaint Frames" "0,1" bitfld.long 0x00 3.--4. " RTC ,Receive Threshold Control" "0,1,2,3" bitfld.long 0x00 2. " OSF ,Operate on Second Frame" "0,1" newline bitfld.long 0x00 1. " SR ,Start/Stop Receive" "0,1" group.long 0x101C++0x3 line.long 0x00 "EMAC1_DMA0_IEN,EMAC1 DMA Interrupt Enable Register" bitfld.long 0x00 16. " NIE ,Normal Interrupt Summary Enable" "0,1" bitfld.long 0x00 15. " AIE ,Abnormal Interrupt Summary Enable" "0,1" bitfld.long 0x00 14. " ERE ,Early Receive Interrupt Enable" "0,1" bitfld.long 0x00 13. " FBE ,Fatal Bus Error Enable" "0,1" newline bitfld.long 0x00 10. " ETE ,Early Transmit Interrupt Enable" "0,1" bitfld.long 0x00 9. " RWE ,Receive WatchdogTimeout Enable" "0,1" bitfld.long 0x00 8. " RSE ,Receive Stopped Enable" "0,1" bitfld.long 0x00 7. " RUE ,Receive Buffer Unavailable Enable" "0,1" newline bitfld.long 0x00 6. " RIE ,Receive Interrupt Enable" "0,1" bitfld.long 0x00 5. " UNE ,Underflow Interrupt Enable" "0,1" bitfld.long 0x00 4. " OVE ,Overflow Interrupt Enable" "0,1" bitfld.long 0x00 3. " TJE ,Transmit Jabber Timeout Enable" "0,1" newline bitfld.long 0x00 2. " TUE ,Transmit Buffer Unavailable Enable" "0,1" bitfld.long 0x00 1. " TSE ,Transmit Stopped Enable" "0,1" bitfld.long 0x00 0. " TIE ,Transmit Interrupt Enable" "0,1" group.long 0x1020++0x3 line.long 0x00 "EMAC1_DMA0_MISS_FRM,EMAC1 DMA Missed Frame Register" bitfld.long 0x00 28. " OVFFIFO ,Overflow bit for FIFO Overflow Counter" "0,1" hexmask.long.word 0x00 17.--27. 1. " MISSFROV ,Missed Frames Buffer Overflow" bitfld.long 0x00 16. " OVFMISS ,Overflow bit for Missed Frame Counter" "0,1" hexmask.long.word 0x00 0.--15. 1. " MISSFRUN ,Missed Frames Unavailable Buffer" group.long 0x1024++0x3 line.long 0x00 "EMAC1_DMA0_RXIWDOG,EMAC1 DMA Rx Interrupt Watch Dog Register" hexmask.long.byte 0x00 0.--7. 1. " RIWT ,RI WatchDog Timer Count" group.long 0x1028++0x3 line.long 0x00 "EMAC1_DMA0_BMMODE,EMAC1 DMA SCB Bus Mode Register" bitfld.long 0x00 20.--22. " WROSRLMT ,SCB Maximum Write Outstanding Request" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. " RDOSRLMT ,SCB Maximum Read Outstanding Request" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13. " ONEKBBE ,1K Boundary Crossing Enable" "0,1" bitfld.long 0x00 12. " AAL ,Address Aligned Beats" "0,1" newline bitfld.long 0x00 3. " BLEN16 ,SCB Burst Length 16" "0,1" bitfld.long 0x00 2. " BLEN8 ,SCB Burst Length 8" "0,1" bitfld.long 0x00 1. " BLEN4 ,SCB Burst Length 4" "0,1" bitfld.long 0x00 0. " UNDEF ,SCB Undefined Burst Length" "0,1" group.long 0x102C++0x3 line.long 0x00 "EMAC1_DMA0_BMSTAT,EMAC1 DMA SCB Status Register" bitfld.long 0x00 1. " BUSRD ,Bus (SCB master) Read Active" "0,1" bitfld.long 0x00 0. " BUSWR ,Bus (SCB master) Write Active" "0,1" group.long 0x1048++0x3 line.long 0x00 "EMAC1_DMA0_TXDSC_CUR,EMAC1 DMA Tx Descriptor Current Register" group.long 0x104C++0x3 line.long 0x00 "EMAC1_DMA0_RXDSC_CUR,EMAC1 DMA Rx Descriptor Current Register" group.long 0x1050++0x3 line.long 0x00 "EMAC1_DMA0_TXBUF_CUR,EMAC1 DMA Tx Buffer Current Register" group.long 0x1054++0x3 line.long 0x00 "EMAC1_DMA0_RXBUF_CUR,EMAC1 DMA Rx Buffer Current Register" tree.end endif tree.end tree "EMDMA (Extended Memory DMA)" tree "EMDMA0" base ad:0x310C602C width 15. group.long 0x0++0x3 line.long 0x00 "EMDMA0_CTL,EMDMA0 External Memory DMA Control Register" bitfld.long 0x00 25. " DIRS ,DMA Transfer Direction Status" "0,1" bitfld.long 0x00 24. " DMAS1 ,DMA External Interface Status" "0,1" bitfld.long 0x00 23. " WBS ,Write Back Status" "0,1" bitfld.long 0x00 22. " TLS ,TAP List Loading Status" "0,1" newline bitfld.long 0x00 21. " CHS ,DMA Chaining Status" "0,1" bitfld.long 0x00 20. " DMAS0 ,DMA Transfer Status" "0,1" bitfld.long 0x00 16.--17. " DFS ,DMA FIFO Status" "0,1,2,3" bitfld.long 0x00 12. " INTDONE0 ,Internal DMA Completion Interrupt (Control)" "0,1" newline bitfld.long 0x00 9. " TLEN ,Tap List DMA Enable" "0,1" bitfld.long 0x00 8. " OFCEN ,On the Fly Control Loading Enable" "0,1" bitfld.long 0x00 7. " WRBEN ,Write Back Enable" "0,1" bitfld.long 0x00 5. " DFLSH ,Flush DMA FIFO" "0,1" newline bitfld.long 0x00 4. " CBEN ,Circular Buffering Enable" "0,1" bitfld.long 0x00 3. " DLEN ,Enable Delay Line DMA" "0,1" bitfld.long 0x00 2. " CHEN ,Enable Chaining" "0,1" bitfld.long 0x00 1. " TRAN ,DMA Direction" "0,1" newline bitfld.long 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "EMDMA0_INDX1,EMDMA0 External Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,DMA External Address Index" group.long 0x58++0x3 line.long 0x00 "EMDMA0_MOD1,EMDMA0 External Modifier Register" hexmask.long 0x00 0.--26. 1. " VALUE ,DMA External Address Modifier" group.long 0x5C++0x3 line.long 0x00 "EMDMA0_CNT1,EMDMA0 External Count Register" group.long 0x60++0x3 line.long 0x00 "EMDMA0_INDX0,EMDMA0 Internal Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,DMA buffer Start Address" group.long 0x64++0x3 line.long 0x00 "EMDMA0_MOD0,EMDMA0 Internal Modifier Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,DMA Address Modifier" group.long 0x68++0x3 line.long 0x00 "EMDMA0_CNT0,EMDMA0 Internal Count Register" group.long 0x6C++0x3 line.long 0x00 "EMDMA0_CHNPTR,EMDMA0 Chain Pointer Register" bitfld.long 0x00 31. " CPDR ,CPDR DMA Direction for the next TCB" "0,1" bitfld.long 0x00 30. " PCI ,Program Controlled Interrupt" "0,1" hexmask.long 0x00 0.--29. 1. " ADDR ,Next Descriptor (Chain) Pointer Address" group.long 0x70++0x3 line.long 0x00 "EMDMA0_BASE,EMDMA0 External Base Address Register" hexmask.long 0x00 0.--29. 1. " ADDR ,External Delay Line Base Address" group.long 0x74++0x3 line.long 0x00 "EMDMA0_TPTR,EMDMA0 Tap List Pointer Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Delay Line Tap List Pointer" group.long 0x78++0x3 line.long 0x00 "EMDMA0_BUFLEN,EMDMA0 Circular Buffer Length Register" hexmask.long 0x00 0.--25. 1. " CLEN ,Delay Line Circular Buffer Length" group.long 0x80++0x3 line.long 0x00 "EMDMA0_TCNT,EMDMA0 Delay Line Tap Count Register" tree.end tree "EMDMA1" base ad:0x310C6030 width 15. group.long 0x0++0x3 line.long 0x00 "EMDMA1_CTL,EMDMA1 External Memory DMA Control Register" bitfld.long 0x00 25. " DIRS ,DMA Transfer Direction Status" "0,1" bitfld.long 0x00 24. " DMAS1 ,DMA External Interface Status" "0,1" bitfld.long 0x00 23. " WBS ,Write Back Status" "0,1" bitfld.long 0x00 22. " TLS ,TAP List Loading Status" "0,1" newline bitfld.long 0x00 21. " CHS ,DMA Chaining Status" "0,1" bitfld.long 0x00 20. " DMAS0 ,DMA Transfer Status" "0,1" bitfld.long 0x00 16.--17. " DFS ,DMA FIFO Status" "0,1,2,3" bitfld.long 0x00 12. " INTDONE0 ,Internal DMA Completion Interrupt (Control)" "0,1" newline bitfld.long 0x00 9. " TLEN ,Tap List DMA Enable" "0,1" bitfld.long 0x00 8. " OFCEN ,On the Fly Control Loading Enable" "0,1" bitfld.long 0x00 7. " WRBEN ,Write Back Enable" "0,1" bitfld.long 0x00 5. " DFLSH ,Flush DMA FIFO" "0,1" newline bitfld.long 0x00 4. " CBEN ,Circular Buffering Enable" "0,1" bitfld.long 0x00 3. " DLEN ,Enable Delay Line DMA" "0,1" bitfld.long 0x00 2. " CHEN ,Enable Chaining" "0,1" bitfld.long 0x00 1. " TRAN ,DMA Direction" "0,1" newline bitfld.long 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x90++0x3 line.long 0x00 "EMDMA1_INDX1,EMDMA1 External Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,DMA External Address Index" group.long 0x94++0x3 line.long 0x00 "EMDMA1_MOD1,EMDMA1 External Modifier Register" hexmask.long 0x00 0.--26. 1. " VALUE ,DMA External Address Modifier" group.long 0x98++0x3 line.long 0x00 "EMDMA1_CNT1,EMDMA1 External Count Register" group.long 0x9C++0x3 line.long 0x00 "EMDMA1_INDX0,EMDMA1 Internal Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,DMA buffer Start Address" group.long 0xA0++0x3 line.long 0x00 "EMDMA1_MOD0,EMDMA1 Internal Modifier Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,DMA Address Modifier" group.long 0xA4++0x3 line.long 0x00 "EMDMA1_CNT0,EMDMA1 Internal Count Register" group.long 0xA8++0x3 line.long 0x00 "EMDMA1_CHNPTR,EMDMA1 Chain Pointer Register" bitfld.long 0x00 31. " CPDR ,CPDR DMA Direction for the next TCB" "0,1" bitfld.long 0x00 30. " PCI ,Program Controlled Interrupt" "0,1" hexmask.long 0x00 0.--29. 1. " ADDR ,Next Descriptor (Chain) Pointer Address" group.long 0xAC++0x3 line.long 0x00 "EMDMA1_BASE,EMDMA1 External Base Address Register" hexmask.long 0x00 0.--29. 1. " ADDR ,External Delay Line Base Address" group.long 0xB0++0x3 line.long 0x00 "EMDMA1_TPTR,EMDMA1 Tap List Pointer Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Delay Line Tap List Pointer" group.long 0xB4++0x3 line.long 0x00 "EMDMA1_BUFLEN,EMDMA1 Circular Buffer Length Register" hexmask.long 0x00 0.--25. 1. " CLEN ,Delay Line Circular Buffer Length" group.long 0xBC++0x3 line.long 0x00 "EMDMA1_TCNT,EMDMA1 Delay Line Tap Count Register" tree.end tree.end tree "EPPI (Enhanced Parallel Peripheral Interface)" base ad:0x31040000 width 17. group.long 0x0++0x3 line.long 0x00 "EPPI0_STAT,EPPI0 Status Register" bitfld.long 0x00 15. " FLD ,Current Field Received by EPPI" "0,1" bitfld.long 0x00 14. " ERRDET ,Preamble Error Detected" "0,1" bitfld.long 0x00 7. " PXPERR ,PxP Ready Error" "0,1" bitfld.long 0x00 6. " ERRNCOR ,Preamble Error Not Corrected" "0,1" newline bitfld.long 0x00 5. " FTERRUNDR ,Frame Track Underflow" "0,1" bitfld.long 0x00 4. " FTERROVR ,Frame Track Overflow" "0,1" bitfld.long 0x00 3. " LTERRUNDR ,Line Track Underflow" "0,1" bitfld.long 0x00 2. " LTERROVR ,Line Track Overflow" "0,1" newline bitfld.long 0x00 1. " YFIFOERR ,Luma FIFO Error" "0,1" bitfld.long 0x00 0. " CFIFOERR ,Chroma FIFO Error" "0,1" group.long 0x4++0x3 line.long 0x00 "EPPI0_HCNT,EPPI0 Horizontal Transfer Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Horizontal Transfer Count" group.long 0x8++0x3 line.long 0x00 "EPPI0_HDLY,EPPI0 Horizontal Delay Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Horizontal Delay Count" group.long 0xC++0x3 line.long 0x00 "EPPI0_VCNT,EPPI0 Vertical Transfer Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Vertical Transfer Count" group.long 0x10++0x3 line.long 0x00 "EPPI0_VDLY,EPPI0 Vertical Delay Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Vertical Delay Count" group.long 0x14++0x3 line.long 0x00 "EPPI0_FRAME,EPPI0 Lines Per Frame Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Lines Per Frame" group.long 0x18++0x3 line.long 0x00 "EPPI0_LINE,EPPI0 Samples Per Line Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Samples Per Line" group.long 0x1C++0x3 line.long 0x00 "EPPI0_CLKDIV,EPPI0 Clock Divide Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Internal Clock Divider" group.long 0x20++0x3 line.long 0x00 "EPPI0_CTL,EPPI0 Control Register" bitfld.long 0x00 31. " CLKGATEN ,Clock Gating Enable" "0,1" bitfld.long 0x00 30. " MUXSEL ,MUX Select" "0,1" bitfld.long 0x00 29. " DMAFINEN ,DMA Finish Enable" "0,1" bitfld.long 0x00 28. " DMACFG ,One or Two DMA Channels Mode" "0,1" newline bitfld.long 0x00 27. " RGBFMTEN ,RGB Formatting Enable" "0,1" bitfld.long 0x00 26. " SPLTWRD ,Split Word" "0,1" bitfld.long 0x00 25. " SUBSPLTODD ,Sub-Split Odd Samples" "0,1" bitfld.long 0x00 24. " SPLTEO ,Split Even and Odd Data Samples" "0,1" newline bitfld.long 0x00 23. " SWAPEN ,Swap Enable" "0,1" bitfld.long 0x00 22. " PACKEN ,Pack/Unpack Enable" "0,1" bitfld.long 0x00 21. " SKIPEO ,Skip Even or Odd" "0,1" bitfld.long 0x00 20. " SKIPEN ,Skip Enable" "0,1" newline bitfld.long 0x00 19. " DMIRR ,Data Mirroring" "0,1" bitfld.long 0x00 16.--18. " DLEN ,Data Length" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14.--15. " POLS ,Frame Sync Polarity" "0,1,2,3" bitfld.long 0x00 12.--13. " POLC ,Clock Polarity" "0,1,2,3" newline bitfld.long 0x00 11. " SIGNEXT ,Sign Extension" "0,1" bitfld.long 0x00 10. " IFSGEN ,Internal Frame Sync Generation" "0,1" bitfld.long 0x00 9. " ICLKGEN ,Internal Clock Generation" "0,1" bitfld.long 0x00 8. " BLANKGEN ,Blanking Generation (ITU Output Mode)" "0,1" newline bitfld.long 0x00 7. " ITUTYPE ,ITU Interlace or Progressive" "0,1" bitfld.long 0x00 6. " FLDSEL ,Field Select/Trigger" "0,1" bitfld.long 0x00 4.--5. " FSCFG ,Frame Sync Configuration" "0,1,2,3" bitfld.long 0x00 2.--3. " XFRTYPE ,Transfer Type ( Operating Mode)" "0,1,2,3" newline bitfld.long 0x00 1. " DIR ,PPI Direction" "0,1" bitfld.long 0x00 0. " EN ,PPI Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "EPPI0_FS1_WLHB,EPPI0 FS1 Width Register / EPPI Horizontal Blanking Samples Per Line Register" group.long 0x28++0x3 line.long 0x00 "EPPI0_FS1_PASPL,EPPI0 FS1 Period Register / EPPI Active Samples Per Line Register" group.long 0x2C++0x3 line.long 0x00 "EPPI0_FS2_WLVB,EPPI0 FS2 Width Register / EPPI Lines Of Vertical Blanking Register" hexmask.long.byte 0x00 24.--31. 1. " F2VBAD ,Field 2 Vertical Blanking After Data" hexmask.long.byte 0x00 16.--23. 1. " F2VBBD ,Field 2 Vertical Blanking Before Data" hexmask.long.byte 0x00 8.--15. 1. " F1VBAD ,Field 1 Vertical Blanking After Data" hexmask.long.byte 0x00 0.--7. 1. " F1VBBD ,Field 1 Vertical Blanking Before Data" group.long 0x30++0x3 line.long 0x00 "EPPI0_FS2_PALPF,EPPI0 FS2 Period Register / EPPI Active Lines Per Field Register" hexmask.long.word 0x00 16.--31. 1. " F2ACT ,Field 2 Active" hexmask.long.word 0x00 0.--15. 1. " F1ACT ,Field 1 Active" group.long 0x34++0x3 line.long 0x00 "EPPI0_IMSK,EPPI0 Interrupt Mask Register" bitfld.long 0x00 7. " PXPERR ,PxP Ready Error Interrupt Mask" "0,1" bitfld.long 0x00 6. " ERRNCOR ,ITU Preamble Error Not Corrected Interrupt Mask" "0,1" bitfld.long 0x00 5. " FTERRUNDR ,Frame Track Underflow Error Interrupt Mask" "0,1" bitfld.long 0x00 4. " FTERROVR ,Frame Track Overflow Error Interrupt Mask" "0,1" newline bitfld.long 0x00 3. " LTERRUNDR ,Line Track Underflow Error Interrupt Mask" "0,1" bitfld.long 0x00 2. " LTERROVR ,Line Track Overflow Error Interrupt Mask" "0,1" bitfld.long 0x00 1. " YFIFOERR ,YFIFO Underflow or Overflow Error Interrupt Mask" "0,1" bitfld.long 0x00 0. " CFIFOERR ,CFIFO Underflow or Overflow Error Interrupt Mask" "0,1" group.long 0x3C++0x3 line.long 0x00 "EPPI0_ODDCLIP,EPPI0 Clipping Register for ODD (Chroma) Data Register" hexmask.long.word 0x00 16.--31. 1. " HIGHODD ,High Odd Clipping Threshold (Chroma Data)" hexmask.long.word 0x00 0.--15. 1. " LOWODD ,Low Odd Clipping Threshold (Chroma Data)" group.long 0x40++0x3 line.long 0x00 "EPPI0_EVENCLIP,EPPI0 Clipping Register for EVEN (Luma) Data Register" hexmask.long.word 0x00 16.--31. 1. " HIGHEVEN ,High Even Clipping Threshold (Luma Data)" hexmask.long.word 0x00 0.--15. 1. " LOWEVEN ,Low Even Clipping Threshold (Luma Data)" group.long 0x44++0x3 line.long 0x00 "EPPI0_FS1_DLY,EPPI0 Frame Sync 1 Delay Value Register" group.long 0x48++0x3 line.long 0x00 "EPPI0_FS2_DLY,EPPI0 Frame Sync 2 Delay Value Register" group.long 0x4C++0x3 line.long 0x00 "EPPI0_CTL2,EPPI0 Control Register 2 Register" bitfld.long 0x00 1. " FS1FINEN ,HSYNC Finish Enable" "0,1" tree.end tree "FFTA (FFT Accelerator)" base ad:0x3109C000 width 20. group.long 0x0++0x3 line.long 0x00 "FFTA0_INST00,FFTA0 Instruction Memory Register" group.long 0x4++0x3 line.long 0x00 "FFTA0_INST01,FFTA0 Instruction Memory Register" group.long 0x8++0x3 line.long 0x00 "FFTA0_INST02,FFTA0 Instruction Memory Register" group.long 0xC++0x3 line.long 0x00 "FFTA0_INST03,FFTA0 Instruction Memory Register" group.long 0x10++0x3 line.long 0x00 "FFTA0_INST04,FFTA0 Instruction Memory Register" group.long 0x14++0x3 line.long 0x00 "FFTA0_INST05,FFTA0 Instruction Memory Register" group.long 0x18++0x3 line.long 0x00 "FFTA0_INST06,FFTA0 Instruction Memory Register" group.long 0x1C++0x3 line.long 0x00 "FFTA0_INST07,FFTA0 Instruction Memory Register" group.long 0x20++0x3 line.long 0x00 "FFTA0_INST08,FFTA0 Instruction Memory Register" group.long 0x24++0x3 line.long 0x00 "FFTA0_INST09,FFTA0 Instruction Memory Register" group.long 0x28++0x3 line.long 0x00 "FFTA0_INST10,FFTA0 Instruction Memory Register" group.long 0x2C++0x3 line.long 0x00 "FFTA0_INST11,FFTA0 Instruction Memory Register" group.long 0x30++0x3 line.long 0x00 "FFTA0_INST12,FFTA0 Instruction Memory Register" group.long 0x34++0x3 line.long 0x00 "FFTA0_INST13,FFTA0 Instruction Memory Register" group.long 0x38++0x3 line.long 0x00 "FFTA0_INST14,FFTA0 Instruction Memory Register" group.long 0x3C++0x3 line.long 0x00 "FFTA0_INST15,FFTA0 Instruction Memory Register" group.long 0x40++0x3 line.long 0x00 "FFTA0_INST16,FFTA0 Instruction Memory Register" group.long 0x44++0x3 line.long 0x00 "FFTA0_INST17,FFTA0 Instruction Memory Register" group.long 0x48++0x3 line.long 0x00 "FFTA0_INST18,FFTA0 Instruction Memory Register" group.long 0x4C++0x3 line.long 0x00 "FFTA0_INST19,FFTA0 Instruction Memory Register" group.long 0x50++0x3 line.long 0x00 "FFTA0_INST20,FFTA0 Instruction Memory Register" group.long 0x54++0x3 line.long 0x00 "FFTA0_INST21,FFTA0 Instruction Memory Register" group.long 0x58++0x3 line.long 0x00 "FFTA0_INST22,FFTA0 Instruction Memory Register" group.long 0x5C++0x3 line.long 0x00 "FFTA0_INST23,FFTA0 Instruction Memory Register" group.long 0x60++0x3 line.long 0x00 "FFTA0_INST24,FFTA0 Instruction Memory Register" group.long 0x64++0x3 line.long 0x00 "FFTA0_INST25,FFTA0 Instruction Memory Register" group.long 0x68++0x3 line.long 0x00 "FFTA0_INST26,FFTA0 Instruction Memory Register" group.long 0x6C++0x3 line.long 0x00 "FFTA0_INST27,FFTA0 Instruction Memory Register" group.long 0x70++0x3 line.long 0x00 "FFTA0_INST28,FFTA0 Instruction Memory Register" group.long 0x74++0x3 line.long 0x00 "FFTA0_INST29,FFTA0 Instruction Memory Register" group.long 0x78++0x3 line.long 0x00 "FFTA0_INST30,FFTA0 Instruction Memory Register" group.long 0x7C++0x3 line.long 0x00 "FFTA0_INST31,FFTA0 Instruction Memory Register" group.long 0x80++0x3 line.long 0x00 "FFTA0_INST32,FFTA0 Instruction Memory Register" group.long 0x84++0x3 line.long 0x00 "FFTA0_INST33,FFTA0 Instruction Memory Register" group.long 0x88++0x3 line.long 0x00 "FFTA0_INST34,FFTA0 Instruction Memory Register" group.long 0x8C++0x3 line.long 0x00 "FFTA0_INST35,FFTA0 Instruction Memory Register" group.long 0x90++0x3 line.long 0x00 "FFTA0_INST36,FFTA0 Instruction Memory Register" group.long 0x94++0x3 line.long 0x00 "FFTA0_INST37,FFTA0 Instruction Memory Register" group.long 0x98++0x3 line.long 0x00 "FFTA0_INST38,FFTA0 Instruction Memory Register" group.long 0x9C++0x3 line.long 0x00 "FFTA0_INST39,FFTA0 Instruction Memory Register" group.long 0xA0++0x3 line.long 0x00 "FFTA0_INST40,FFTA0 Instruction Memory Register" group.long 0xA4++0x3 line.long 0x00 "FFTA0_INST41,FFTA0 Instruction Memory Register" group.long 0xA8++0x3 line.long 0x00 "FFTA0_INST42,FFTA0 Instruction Memory Register" group.long 0xAC++0x3 line.long 0x00 "FFTA0_INST43,FFTA0 Instruction Memory Register" group.long 0xB0++0x3 line.long 0x00 "FFTA0_INST44,FFTA0 Instruction Memory Register" group.long 0xB4++0x3 line.long 0x00 "FFTA0_INST45,FFTA0 Instruction Memory Register" group.long 0xB8++0x3 line.long 0x00 "FFTA0_INST46,FFTA0 Instruction Memory Register" group.long 0xBC++0x3 line.long 0x00 "FFTA0_INST47,FFTA0 Instruction Memory Register" group.long 0xC0++0x3 line.long 0x00 "FFTA0_INST48,FFTA0 Instruction Memory Register" group.long 0xC4++0x3 line.long 0x00 "FFTA0_INST49,FFTA0 Instruction Memory Register" group.long 0xC8++0x3 line.long 0x00 "FFTA0_INST50,FFTA0 Instruction Memory Register" group.long 0xCC++0x3 line.long 0x00 "FFTA0_INST51,FFTA0 Instruction Memory Register" group.long 0xD0++0x3 line.long 0x00 "FFTA0_INST52,FFTA0 Instruction Memory Register" group.long 0xD4++0x3 line.long 0x00 "FFTA0_INST53,FFTA0 Instruction Memory Register" group.long 0xD8++0x3 line.long 0x00 "FFTA0_INST54,FFTA0 Instruction Memory Register" group.long 0xDC++0x3 line.long 0x00 "FFTA0_INST55,FFTA0 Instruction Memory Register" group.long 0xE0++0x3 line.long 0x00 "FFTA0_INST56,FFTA0 Instruction Memory Register" group.long 0xE4++0x3 line.long 0x00 "FFTA0_INST57,FFTA0 Instruction Memory Register" group.long 0xE8++0x3 line.long 0x00 "FFTA0_INST58,FFTA0 Instruction Memory Register" group.long 0xEC++0x3 line.long 0x00 "FFTA0_INST59,FFTA0 Instruction Memory Register" group.long 0xF0++0x3 line.long 0x00 "FFTA0_INST60,FFTA0 Instruction Memory Register" group.long 0xF4++0x3 line.long 0x00 "FFTA0_INST61,FFTA0 Instruction Memory Register" group.long 0xF8++0x3 line.long 0x00 "FFTA0_INST62,FFTA0 Instruction Memory Register" group.long 0xFC++0x3 line.long 0x00 "FFTA0_INST63,FFTA0 Instruction Memory Register" group.long 0x100++0x3 line.long 0x00 "FFTA0_CTL,FFTA0 Control Register" bitfld.long 0x00 2. " STEPEN ,Single-Step Enable" "0,1" bitfld.long 0x00 1. " RST ,Reset HPFP-FFT Engine" "0,1" bitfld.long 0x00 0. " EN ,Enable HPFP-FFT Engine" "0,1" group.long 0x104++0x3 line.long 0x00 "FFTA0_STAT,FFTA0 Status Register" bitfld.long 0x00 18. " INVMAGIC ,Invalid Magic word in the initialization header" "0,1" bitfld.long 0x00 14.--17. " CTLSTATE2 ,Thread 2 Control State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10.--13. " CTLSTATE1 ,Thread 1 Control State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 6.--9. " CTLSTATE0 ,Thread 0 Control State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5. " VLDOUT ,Data Available State" "0,1" bitfld.long 0x00 4. " RDYOUT ,Ready for Data State" "0,1" bitfld.long 0x00 3. " INVLDINST ,An Invalid Instruction Was Executed" "0,1" bitfld.long 0x00 2. " OVR ,Math Result Is Greater Than The Maximum Normalized Number" "0,1" newline bitfld.long 0x00 1. " UNDR ,Math Result Is Smaller Than The Minimum Normalized Number, But Not A Zero" "0,1" bitfld.long 0x00 0. " INVLDIN ,NAN Input Data or Invalid Math Operation" "0,1" group.long 0x108++0x3 line.long 0x00 "FFTA0_PC,FFTA0 Program Counter Register" bitfld.long 0x00 0.--5. " NXTSEQ ,Next Sequence Instruction Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x10C++0x3 line.long 0x00 "FFTA0_THREADOFFSET,FFTA0 Thread Count Offset Register" bitfld.long 0x00 0.--1. " VALUE ,Thread Offset Value" "0,1,2,3" group.long 0x110++0x3 line.long 0x00 "FFTA0_SCALE,FFTA0 FFT/IFFT Scale Factor Register" group.long 0x114++0x3 line.long 0x00 "FFTA0_XFRLEFT00,FFTA0 Load/Dump Transfer Left Register" hexmask.long.word 0x00 0.--12. 1. " VALUE ,Load/Dump Transfer remaining For Thread" group.long 0x118++0x3 line.long 0x00 "FFTA0_XFRLEFT01,FFTA0 Load/Dump Transfer Left Register" hexmask.long.word 0x00 0.--12. 1. " VALUE ,Load/Dump Transfer remaining For Thread" group.long 0x11C++0x3 line.long 0x00 "FFTA0_XFRLEFT02,FFTA0 Load/Dump Transfer Left Register" hexmask.long.word 0x00 0.--12. 1. " VALUE ,Load/Dump Transfer remaining For Thread" group.long 0x120++0x3 line.long 0x00 "FFTA0_LC00,FFTA0 Loop Counter Value Register" hexmask.long 0x00 0.--24. 1. " VALUE ,Current value of the counter" group.long 0x124++0x3 line.long 0x00 "FFTA0_LC01,FFTA0 Loop Counter Value Register" hexmask.long 0x00 0.--24. 1. " VALUE ,Current value of the counter" group.long 0x600++0x3 line.long 0x00 "FFTA0_WCTL,FFTA0 Wrapper Control Register" bitfld.long 0x00 1.--2. " FFTCLKRATIO ,FFTCLK Divider Value" "0,1,2,3" bitfld.long 0x00 0. " EN ,FFT Engine Enable" "0,1" tree.end tree "FIR (FIR Accelerator)" base ad:0x310C3000 width 16. group.long 0x0++0x3 line.long 0x00 "FIR0_CTL1,FIR0 FIR Global Control Register" bitfld.long 0x00 14.--16. " RND ,Rounding Mode" "0,1,2,3,4,5,6,7" bitfld.long 0x00 13. " TC ,Two's-Complement" "0,1" bitfld.long 0x00 12. " FXD ,Fixed-Point Accelerator Select" "0,1" bitfld.long 0x00 11. " CCINTR ,Channel Complete Interrupt" "0,1" newline bitfld.long 0x00 9. " CAI ,Channel Auto Iterate" "0,1" bitfld.long 0x00 8. " DMAEN ,DMA Enable" "0,1" bitfld.long 0x00 1.--5. " CH ,Number of Channels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,FIR Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "FIR0_DMASTAT,FIR0 FIR DMA Status Register" bitfld.long 0x00 12.--13. " CURITER ,Current MAC Iteration" "0,1,2,3" bitfld.long 0x00 7.--11. " CURCHNL ,Current Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6. " ACDONE ,All Channels Done" "0,1" bitfld.long 0x00 5. " WDONE ,Channel Done" "0,1" newline bitfld.long 0x00 4. " WRBK ,Writing Back" "0,1" bitfld.long 0x00 3. " PPGS ,MAC Processing in Progress" "0,1" bitfld.long 0x00 2. " DLD ,Data Preload" "0,1" bitfld.long 0x00 1. " CLD ,Coefficient Loading" "0,1" newline bitfld.long 0x00 0. " CPLD ,Chain Pointer Loading Status" "0,1" group.long 0x8++0x3 line.long 0x00 "FIR0_MACSTAT,FIR0 FIR MAC Status Register" bitfld.long 0x00 23. " AINV3 ,Addition Invalid" "0,1" bitfld.long 0x00 22. " ARI3 ,Adder Result Overflow" "0,1" bitfld.long 0x00 21. " ARZ3 ,Adder Result Underflow" "0,1" bitfld.long 0x00 20. " MINV3 ,Multiply Invalid" "0,1" newline bitfld.long 0x00 19. " MRI3 ,Multiplier Result Overflow" "0,1" bitfld.long 0x00 18. " MRZ3 ,Multiplier Result Underflow" "0,1" bitfld.long 0x00 17. " AINV2 ,Addition Invalid" "0,1" bitfld.long 0x00 16. " ARI2 ,Adder Result Overflow" "0,1" newline bitfld.long 0x00 15. " ARZ2 ,Adder Result Underflow" "0,1" bitfld.long 0x00 14. " MINV2 ,Multiply Invalid" "0,1" bitfld.long 0x00 13. " MRI2 ,Multiplier Result Overflow" "0,1" bitfld.long 0x00 12. " MRZ2 ,Multiplier Result Underflow" "0,1" newline bitfld.long 0x00 11. " AINV1 ,Addition Invalid" "0,1" bitfld.long 0x00 10. " ARI1 ,Adder Result Overflow" "0,1" bitfld.long 0x00 9. " ARZ1 ,Adder Result Underflow" "0,1" bitfld.long 0x00 8. " MINV1 ,Multiply Invalid" "0,1" newline bitfld.long 0x00 7. " MRI1 ,Multiplier Result Overflow" "0,1" bitfld.long 0x00 6. " MRZ1 ,Multiplier Result Underflow" "0,1" bitfld.long 0x00 5. " AINV0 ,Addition Invalid" "0,1" bitfld.long 0x00 4. " ARI0 ,Adder Result Overflow" "0,1" newline bitfld.long 0x00 3. " ARZ0 ,Adder Result Underflow" "0,1" bitfld.long 0x00 2. " MINV0 ,Multiply Invalid" "0,1" bitfld.long 0x00 1. " MRI0 ,Multiplier Result Overflow" "0,1" bitfld.long 0x00 0. " MRZ0 ,Multiplier Result Underflow" "0,1" group.long 0x10++0x3 line.long 0x00 "FIR0_DBG_CTL,FIR0 FIR Debug Control Register" bitfld.long 0x00 5. " ADRINC ,Address Auto Increment" "0,1" bitfld.long 0x00 4. " MEM ,Local Memory Access" "0,1" bitfld.long 0x00 2. " RUN ,Release MAC" "0,1" bitfld.long 0x00 1. " HLD ,Hold" "0,1" newline bitfld.long 0x00 0. " EN ,Debug Mode Enable" "0,1" group.long 0x14++0x3 line.long 0x00 "FIR0_DBG_ADDR,FIR0 Debug Address Register" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Debug Address, Coefficient Memory Select" group.long 0x18++0x3 line.long 0x00 "FIR0_DBG_WRDAT,FIR0 FIR Debug Data Write Register" group.long 0x1C++0x3 line.long 0x00 "FIR0_DBG_RDDAT,FIR0 FIR Debug Data Read Register" group.long 0x40++0x3 line.long 0x00 "FIR0_CTL2,FIR0 FIR Channel Control Register" bitfld.long 0x00 30. " UPSAMP ,Up Sampling Enable" "0,1" bitfld.long 0x00 29. " SRCEN ,Sample Rate Conversion Enable" "0,1" bitfld.long 0x00 25.--27. " RATIO ,Up/Down Sampling Ratio" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 14.--23. 1. " WINDOW ,Window Size" newline hexmask.long.word 0x00 0.--11. 1. " TAPLEN ,Tap Length" group.long 0x44++0x3 line.long 0x00 "FIR0_INIDX,FIR0 FIR Input Data Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Word Address with Lower 2 Bits Removed" group.long 0x48++0x3 line.long 0x00 "FIR0_INMOD,FIR0 FIR Input Data Modifier Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Input Data Buffer Modifier" group.long 0x4C++0x3 line.long 0x00 "FIR0_INCNT,FIR0 FIR Input Data Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Input Data Count" group.long 0x50++0x3 line.long 0x00 "FIR0_INBASE,FIR0 FIR Input Data Base Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Word Address with Lower 2 Bits Removed" group.long 0x54++0x3 line.long 0x00 "FIR0_OUTIDX,FIR0 FIR Output Data Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Word Address with Lower 2 Bits Removed" group.long 0x58++0x3 line.long 0x00 "FIR0_OUTMOD,FIR0 FIR Output Data Modifier Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Output Data Modifier" group.long 0x5C++0x3 line.long 0x00 "FIR0_OUTCNT,FIR0 FIR Output Data Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Output Buffer Count" group.long 0x60++0x3 line.long 0x00 "FIR0_OUTBASE,FIR0 FIR Output Data Base Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Word Address with Lower 2 Bits Removed" group.long 0x64++0x3 line.long 0x00 "FIR0_COEFIDX,FIR0 FIR Coefficient Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Word Addresses with Lower 2 Bits Removed" group.long 0x68++0x3 line.long 0x00 "FIR0_COEFMOD,FIR0 FIR Coefficient Modifier Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Coefficient Index Modifier" group.long 0x6C++0x3 line.long 0x00 "FIR0_COEFCNT,FIR0 FIR Coefficient Count Register" hexmask.long.word 0x00 0.--15. 1. " CCNT ,16-bit Coefficient Buffer Count" group.long 0x70++0x3 line.long 0x00 "FIR0_CHNPTR,FIR0 FIR Chain Pointer Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Chain Pointer Address" tree.end tree "GIC (Generic Interrupt Controller)" tree "GICCPU1 " base ad:0x310B4000 width 22. group.long 0x0++0x3 line.long 0x00 "GICCPU1_CTL,GICCPU1 CPU Interface Control Register (ICCICR)" group.long 0x4++0x3 line.long 0x00 "GICCPU1_PRIO_MSK,GICCPU1 Priority Mask Register (ICCIPMR)" group.long 0x8++0x3 line.long 0x00 "GICCPU1_BIN_PT,GICCPU1 Binary Point Register (ICCBPR)" group.long 0xC++0x3 line.long 0x00 "GICCPU1_INT_ACK,GICCPU1 Interrupt Acknowledge Register (ICCIAR)" group.long 0x10++0x3 line.long 0x00 "GICCPU1_EOI,GICCPU1 End of Interrupt Register (ICCEOIR)" group.long 0x14++0x3 line.long 0x00 "GICCPU1_RUN_PRIO,GICCPU1 Running Priority Register (ICCRPR)" group.long 0x18++0x3 line.long 0x00 "GICCPU1_PND_HI,GICCPU1 Highest Pending Interrupt Register (ICCHPIR)" group.long 0x1C++0x3 line.long 0x00 "GICCPU1_BIN_PT_ALIAS,GICCPU1 Aliased Binary Point Register (ICCABPR)" tree.end tree "GICDST0" base ad:0x310B2000 width 23. group.long 0x0++0x3 line.long 0x00 "GICDST0_EN,GICDST0 GIC Port 0 Enable" bitfld.long 0x00 0. " VALUE ,Global Interrupt Monitor Enable" "0,1" group.word 0x80++0x1 line.word 0x00 "GICDST0_SGI_SECURITY,GICDST0 Software Generated Interrupt Security Register" group.long 0x84++0x3 line.long 0x00 "GICDST0_SPI_SECURITY0,GICDST0 Shared Peripheral Interrupt Security Register" group.long 0x88++0x3 line.long 0x00 "GICDST0_SPI_SECURITY1,GICDST0 Shared Peripheral Interrupt Security Register" group.long 0x8C++0x3 line.long 0x00 "GICDST0_SPI_SECURITY2,GICDST0 Shared Peripheral Interrupt Security Register" group.long 0x90++0x3 line.long 0x00 "GICDST0_SPI_SECURITY3,GICDST0 Shared Peripheral Interrupt Security Register" group.long 0x94++0x3 line.long 0x00 "GICDST0_SPI_SECURITY4,GICDST0 Shared Peripheral Interrupt Security Register" group.long 0x98++0x3 line.long 0x00 "GICDST0_SPI_SECURITY5,GICDST0 Shared Peripheral Interrupt Security Register" group.long 0x9C++0x3 line.long 0x00 "GICDST0_SPI_SECURITY6,GICDST0 Shared Peripheral Interrupt Security Register" group.long 0xA0++0x3 line.long 0x00 "GICDST0_SPI_SECURITY7,GICDST0 Shared Peripheral Interrupt Security Register" group.long 0x104++0x3 line.long 0x00 "GICDST0_SPI_EN_SET0,GICDST0 Shared Peripheral Interrupt Enable Set Register" group.long 0x108++0x3 line.long 0x00 "GICDST0_SPI_EN_SET1,GICDST0 Shared Peripheral Interrupt Enable Set Register" group.long 0x10C++0x3 line.long 0x00 "GICDST0_SPI_EN_SET2,GICDST0 Shared Peripheral Interrupt Enable Set Register" group.long 0x110++0x3 line.long 0x00 "GICDST0_SPI_EN_SET3,GICDST0 Shared Peripheral Interrupt Enable Set Register" group.long 0x114++0x3 line.long 0x00 "GICDST0_SPI_EN_SET4,GICDST0 Shared Peripheral Interrupt Enable Set Register" group.long 0x118++0x3 line.long 0x00 "GICDST0_SPI_EN_SET5,GICDST0 Shared Peripheral Interrupt Enable Set Register" group.long 0x11C++0x3 line.long 0x00 "GICDST0_SPI_EN_SET6,GICDST0 Shared Peripheral Interrupt Enable Set Register" group.long 0x120++0x3 line.long 0x00 "GICDST0_SPI_EN_SET7,GICDST0 Shared Peripheral Interrupt Enable Set Register" group.long 0x184++0x3 line.long 0x00 "GICDST0_SPI_EN_CLR0,GICDST0 Shared Peripheral Interrupt Enable Clear Register" group.long 0x188++0x3 line.long 0x00 "GICDST0_SPI_EN_CLR1,GICDST0 Shared Peripheral Interrupt Enable Clear Register" group.long 0x18C++0x3 line.long 0x00 "GICDST0_SPI_EN_CLR2,GICDST0 Shared Peripheral Interrupt Enable Clear Register" group.long 0x190++0x3 line.long 0x00 "GICDST0_SPI_EN_CLR3,GICDST0 Shared Peripheral Interrupt Enable Clear Register" group.long 0x194++0x3 line.long 0x00 "GICDST0_SPI_EN_CLR4,GICDST0 Shared Peripheral Interrupt Enable Clear Register" group.long 0x198++0x3 line.long 0x00 "GICDST0_SPI_EN_CLR5,GICDST0 Shared Peripheral Interrupt Enable Clear Register" group.long 0x19C++0x3 line.long 0x00 "GICDST0_SPI_EN_CLR6,GICDST0 Shared Peripheral Interrupt Enable Clear Register" group.long 0x1A0++0x3 line.long 0x00 "GICDST0_SPI_EN_CLR7,GICDST0 Shared Peripheral Interrupt Enable Clear Register" group.word 0x200++0x1 line.word 0x00 "GICDST0_SGI_PND_SET,GICDST0 Software Generated Interrupt Pending Set Register" group.long 0x204++0x3 line.long 0x00 "GICDST0_SPI_PND_SET0,GICDST0 Shared Peripheral Interrupt Pending Set Register" group.long 0x208++0x3 line.long 0x00 "GICDST0_SPI_PND_SET1,GICDST0 Shared Peripheral Interrupt Pending Set Register" group.long 0x20C++0x3 line.long 0x00 "GICDST0_SPI_PND_SET2,GICDST0 Shared Peripheral Interrupt Pending Set Register" group.long 0x210++0x3 line.long 0x00 "GICDST0_SPI_PND_SET3,GICDST0 Shared Peripheral Interrupt Pending Set Register" group.long 0x214++0x3 line.long 0x00 "GICDST0_SPI_PND_SET4,GICDST0 Shared Peripheral Interrupt Pending Set Register" group.long 0x218++0x3 line.long 0x00 "GICDST0_SPI_PND_SET5,GICDST0 Shared Peripheral Interrupt Pending Set Register" group.long 0x21C++0x3 line.long 0x00 "GICDST0_SPI_PND_SET6,GICDST0 Shared Peripheral Interrupt Pending Set Register" group.long 0x220++0x3 line.long 0x00 "GICDST0_SPI_PND_SET7,GICDST0 Shared Peripheral Interrupt Pending Set Register" group.word 0x280++0x1 line.word 0x00 "GICDST0_SGI_PND_CLR,GICDST0 Software Generated Interrupt Clear-Pending Register" group.long 0x284++0x3 line.long 0x00 "GICDST0_SPI_PND_CLR0,GICDST0 Shared Peripheral Interrupt Pending Clear Register" group.long 0x288++0x3 line.long 0x00 "GICDST0_SPI_PND_CLR1,GICDST0 Shared Peripheral Interrupt Pending Clear Register" group.long 0x28C++0x3 line.long 0x00 "GICDST0_SPI_PND_CLR2,GICDST0 Shared Peripheral Interrupt Pending Clear Register" group.long 0x290++0x3 line.long 0x00 "GICDST0_SPI_PND_CLR3,GICDST0 Shared Peripheral Interrupt Pending Clear Register" group.long 0x294++0x3 line.long 0x00 "GICDST0_SPI_PND_CLR4,GICDST0 Shared Peripheral Interrupt Pending Clear Register" group.long 0x298++0x3 line.long 0x00 "GICDST0_SPI_PND_CLR5,GICDST0 Shared Peripheral Interrupt Pending Clear Register" group.long 0x29C++0x3 line.long 0x00 "GICDST0_SPI_PND_CLR6,GICDST0 Shared Peripheral Interrupt Pending Clear Register" group.long 0x2A0++0x3 line.long 0x00 "GICDST0_SPI_PND_CLR7,GICDST0 Shared Peripheral Interrupt Pending Clear Register" group.word 0x300++0x1 line.word 0x00 "GICDST0_SGI_ACTIVE,GICDST0 Software Generated Interrupt Active Register" group.long 0x304++0x3 line.long 0x00 "GICDST0_SPI_ACTIVE0,GICDST0 Shared Peripheral Interrupt Active Register" group.long 0x308++0x3 line.long 0x00 "GICDST0_SPI_ACTIVE1,GICDST0 Shared Peripheral Interrupt Active Register" group.long 0x30C++0x3 line.long 0x00 "GICDST0_SPI_ACTIVE2,GICDST0 Shared Peripheral Interrupt Active Register" group.long 0x310++0x3 line.long 0x00 "GICDST0_SPI_ACTIVE3,GICDST0 Shared Peripheral Interrupt Active Register" group.long 0x314++0x3 line.long 0x00 "GICDST0_SPI_ACTIVE4,GICDST0 Shared Peripheral Interrupt Active Register" group.long 0x318++0x3 line.long 0x00 "GICDST0_SPI_ACTIVE5,GICDST0 Shared Peripheral Interrupt Active Register" group.long 0x31C++0x3 line.long 0x00 "GICDST0_SPI_ACTIVE6,GICDST0 Shared Peripheral Interrupt Active Register" group.long 0x320++0x3 line.long 0x00 "GICDST0_SPI_ACTIVE7,GICDST0 Shared Peripheral Interrupt Active Register" group.byte 0x400++0x0 line.byte 0x00 "GICDST0_SGI_PRIO0,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x401++0x0 line.byte 0x00 "GICDST0_SGI_PRIO1,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x402++0x0 line.byte 0x00 "GICDST0_SGI_PRIO2,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x403++0x0 line.byte 0x00 "GICDST0_SGI_PRIO3,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x404++0x0 line.byte 0x00 "GICDST0_SGI_PRIO4,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x405++0x0 line.byte 0x00 "GICDST0_SGI_PRIO5,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x406++0x0 line.byte 0x00 "GICDST0_SGI_PRIO6,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x407++0x0 line.byte 0x00 "GICDST0_SGI_PRIO7,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x408++0x0 line.byte 0x00 "GICDST0_SGI_PRIO8,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x409++0x0 line.byte 0x00 "GICDST0_SGI_PRIO9,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x40A++0x0 line.byte 0x00 "GICDST0_SGI_PRIO10,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x40B++0x0 line.byte 0x00 "GICDST0_SGI_PRIO11,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x40C++0x0 line.byte 0x00 "GICDST0_SGI_PRIO12,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x40D++0x0 line.byte 0x00 "GICDST0_SGI_PRIO13,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x40E++0x0 line.byte 0x00 "GICDST0_SGI_PRIO14,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x40F++0x0 line.byte 0x00 "GICDST0_SGI_PRIO15,GICDST0 Software Generated Interrupt Priority Register" group.byte 0x420++0x0 line.byte 0x00 "GICDST0_SPI_PRIO0,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x421++0x0 line.byte 0x00 "GICDST0_SPI_PRIO1,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x422++0x0 line.byte 0x00 "GICDST0_SPI_PRIO2,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x423++0x0 line.byte 0x00 "GICDST0_SPI_PRIO3,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x424++0x0 line.byte 0x00 "GICDST0_SPI_PRIO4,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x425++0x0 line.byte 0x00 "GICDST0_SPI_PRIO5,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x426++0x0 line.byte 0x00 "GICDST0_SPI_PRIO6,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x427++0x0 line.byte 0x00 "GICDST0_SPI_PRIO7,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x428++0x0 line.byte 0x00 "GICDST0_SPI_PRIO8,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x429++0x0 line.byte 0x00 "GICDST0_SPI_PRIO9,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x42A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO10,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x42B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO11,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x42C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO12,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x42D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO13,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x42E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO14,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x42F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO15,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x430++0x0 line.byte 0x00 "GICDST0_SPI_PRIO16,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x431++0x0 line.byte 0x00 "GICDST0_SPI_PRIO17,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x432++0x0 line.byte 0x00 "GICDST0_SPI_PRIO18,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x433++0x0 line.byte 0x00 "GICDST0_SPI_PRIO19,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x434++0x0 line.byte 0x00 "GICDST0_SPI_PRIO20,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x435++0x0 line.byte 0x00 "GICDST0_SPI_PRIO21,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x436++0x0 line.byte 0x00 "GICDST0_SPI_PRIO22,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x437++0x0 line.byte 0x00 "GICDST0_SPI_PRIO23,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x438++0x0 line.byte 0x00 "GICDST0_SPI_PRIO24,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x439++0x0 line.byte 0x00 "GICDST0_SPI_PRIO25,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x43A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO26,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x43B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO27,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x43C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO28,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x43D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO29,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x43E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO30,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x43F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO31,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x440++0x0 line.byte 0x00 "GICDST0_SPI_PRIO32,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x441++0x0 line.byte 0x00 "GICDST0_SPI_PRIO33,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x442++0x0 line.byte 0x00 "GICDST0_SPI_PRIO34,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x443++0x0 line.byte 0x00 "GICDST0_SPI_PRIO35,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x444++0x0 line.byte 0x00 "GICDST0_SPI_PRIO36,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x445++0x0 line.byte 0x00 "GICDST0_SPI_PRIO37,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x446++0x0 line.byte 0x00 "GICDST0_SPI_PRIO38,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x447++0x0 line.byte 0x00 "GICDST0_SPI_PRIO39,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x448++0x0 line.byte 0x00 "GICDST0_SPI_PRIO40,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x449++0x0 line.byte 0x00 "GICDST0_SPI_PRIO41,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x44A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO42,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x44B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO43,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x44C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO44,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x44D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO45,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x44E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO46,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x44F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO47,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x450++0x0 line.byte 0x00 "GICDST0_SPI_PRIO48,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x451++0x0 line.byte 0x00 "GICDST0_SPI_PRIO49,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x452++0x0 line.byte 0x00 "GICDST0_SPI_PRIO50,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x453++0x0 line.byte 0x00 "GICDST0_SPI_PRIO51,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x454++0x0 line.byte 0x00 "GICDST0_SPI_PRIO52,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x455++0x0 line.byte 0x00 "GICDST0_SPI_PRIO53,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x456++0x0 line.byte 0x00 "GICDST0_SPI_PRIO54,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x457++0x0 line.byte 0x00 "GICDST0_SPI_PRIO55,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x458++0x0 line.byte 0x00 "GICDST0_SPI_PRIO56,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x459++0x0 line.byte 0x00 "GICDST0_SPI_PRIO57,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x45A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO58,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x45B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO59,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x45C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO60,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x45D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO61,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x45E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO62,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x45F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO63,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x460++0x0 line.byte 0x00 "GICDST0_SPI_PRIO64,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x461++0x0 line.byte 0x00 "GICDST0_SPI_PRIO65,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x462++0x0 line.byte 0x00 "GICDST0_SPI_PRIO66,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x463++0x0 line.byte 0x00 "GICDST0_SPI_PRIO67,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x464++0x0 line.byte 0x00 "GICDST0_SPI_PRIO68,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x465++0x0 line.byte 0x00 "GICDST0_SPI_PRIO69,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x466++0x0 line.byte 0x00 "GICDST0_SPI_PRIO70,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x467++0x0 line.byte 0x00 "GICDST0_SPI_PRIO71,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x468++0x0 line.byte 0x00 "GICDST0_SPI_PRIO72,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x469++0x0 line.byte 0x00 "GICDST0_SPI_PRIO73,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x46A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO74,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x46B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO75,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x46C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO76,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x46D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO77,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x46E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO78,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x46F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO79,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x470++0x0 line.byte 0x00 "GICDST0_SPI_PRIO80,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x471++0x0 line.byte 0x00 "GICDST0_SPI_PRIO81,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x472++0x0 line.byte 0x00 "GICDST0_SPI_PRIO82,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x473++0x0 line.byte 0x00 "GICDST0_SPI_PRIO83,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x474++0x0 line.byte 0x00 "GICDST0_SPI_PRIO84,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x475++0x0 line.byte 0x00 "GICDST0_SPI_PRIO85,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x476++0x0 line.byte 0x00 "GICDST0_SPI_PRIO86,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x477++0x0 line.byte 0x00 "GICDST0_SPI_PRIO87,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x478++0x0 line.byte 0x00 "GICDST0_SPI_PRIO88,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x479++0x0 line.byte 0x00 "GICDST0_SPI_PRIO89,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x47A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO90,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x47B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO91,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x47C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO92,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x47D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO93,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x47E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO94,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x47F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO95,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x480++0x0 line.byte 0x00 "GICDST0_SPI_PRIO96,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x481++0x0 line.byte 0x00 "GICDST0_SPI_PRIO97,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x482++0x0 line.byte 0x00 "GICDST0_SPI_PRIO98,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x483++0x0 line.byte 0x00 "GICDST0_SPI_PRIO99,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x484++0x0 line.byte 0x00 "GICDST0_SPI_PRIO100,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x485++0x0 line.byte 0x00 "GICDST0_SPI_PRIO101,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x486++0x0 line.byte 0x00 "GICDST0_SPI_PRIO102,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x487++0x0 line.byte 0x00 "GICDST0_SPI_PRIO103,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x488++0x0 line.byte 0x00 "GICDST0_SPI_PRIO104,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x489++0x0 line.byte 0x00 "GICDST0_SPI_PRIO105,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x48A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO106,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x48B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO107,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x48C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO108,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x48D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO109,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x48E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO110,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x48F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO111,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x490++0x0 line.byte 0x00 "GICDST0_SPI_PRIO112,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x491++0x0 line.byte 0x00 "GICDST0_SPI_PRIO113,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x492++0x0 line.byte 0x00 "GICDST0_SPI_PRIO114,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x493++0x0 line.byte 0x00 "GICDST0_SPI_PRIO115,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x494++0x0 line.byte 0x00 "GICDST0_SPI_PRIO116,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x495++0x0 line.byte 0x00 "GICDST0_SPI_PRIO117,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x496++0x0 line.byte 0x00 "GICDST0_SPI_PRIO118,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x497++0x0 line.byte 0x00 "GICDST0_SPI_PRIO119,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x498++0x0 line.byte 0x00 "GICDST0_SPI_PRIO120,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x499++0x0 line.byte 0x00 "GICDST0_SPI_PRIO121,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x49A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO122,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x49B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO123,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x49C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO124,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x49D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO125,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x49E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO126,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x49F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO127,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A0++0x0 line.byte 0x00 "GICDST0_SPI_PRIO128,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A1++0x0 line.byte 0x00 "GICDST0_SPI_PRIO129,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A2++0x0 line.byte 0x00 "GICDST0_SPI_PRIO130,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A3++0x0 line.byte 0x00 "GICDST0_SPI_PRIO131,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A4++0x0 line.byte 0x00 "GICDST0_SPI_PRIO132,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A5++0x0 line.byte 0x00 "GICDST0_SPI_PRIO133,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A6++0x0 line.byte 0x00 "GICDST0_SPI_PRIO134,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A7++0x0 line.byte 0x00 "GICDST0_SPI_PRIO135,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A8++0x0 line.byte 0x00 "GICDST0_SPI_PRIO136,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4A9++0x0 line.byte 0x00 "GICDST0_SPI_PRIO137,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4AA++0x0 line.byte 0x00 "GICDST0_SPI_PRIO138,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4AB++0x0 line.byte 0x00 "GICDST0_SPI_PRIO139,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4AC++0x0 line.byte 0x00 "GICDST0_SPI_PRIO140,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4AD++0x0 line.byte 0x00 "GICDST0_SPI_PRIO141,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4AE++0x0 line.byte 0x00 "GICDST0_SPI_PRIO142,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4AF++0x0 line.byte 0x00 "GICDST0_SPI_PRIO143,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B0++0x0 line.byte 0x00 "GICDST0_SPI_PRIO144,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B1++0x0 line.byte 0x00 "GICDST0_SPI_PRIO145,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B2++0x0 line.byte 0x00 "GICDST0_SPI_PRIO146,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B3++0x0 line.byte 0x00 "GICDST0_SPI_PRIO147,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B4++0x0 line.byte 0x00 "GICDST0_SPI_PRIO148,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B5++0x0 line.byte 0x00 "GICDST0_SPI_PRIO149,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B6++0x0 line.byte 0x00 "GICDST0_SPI_PRIO150,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B7++0x0 line.byte 0x00 "GICDST0_SPI_PRIO151,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B8++0x0 line.byte 0x00 "GICDST0_SPI_PRIO152,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4B9++0x0 line.byte 0x00 "GICDST0_SPI_PRIO153,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4BA++0x0 line.byte 0x00 "GICDST0_SPI_PRIO154,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4BB++0x0 line.byte 0x00 "GICDST0_SPI_PRIO155,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4BC++0x0 line.byte 0x00 "GICDST0_SPI_PRIO156,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4BD++0x0 line.byte 0x00 "GICDST0_SPI_PRIO157,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4BE++0x0 line.byte 0x00 "GICDST0_SPI_PRIO158,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4BF++0x0 line.byte 0x00 "GICDST0_SPI_PRIO159,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C0++0x0 line.byte 0x00 "GICDST0_SPI_PRIO160,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C1++0x0 line.byte 0x00 "GICDST0_SPI_PRIO161,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C2++0x0 line.byte 0x00 "GICDST0_SPI_PRIO162,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C3++0x0 line.byte 0x00 "GICDST0_SPI_PRIO163,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C4++0x0 line.byte 0x00 "GICDST0_SPI_PRIO164,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C5++0x0 line.byte 0x00 "GICDST0_SPI_PRIO165,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C6++0x0 line.byte 0x00 "GICDST0_SPI_PRIO166,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C7++0x0 line.byte 0x00 "GICDST0_SPI_PRIO167,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C8++0x0 line.byte 0x00 "GICDST0_SPI_PRIO168,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4C9++0x0 line.byte 0x00 "GICDST0_SPI_PRIO169,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4CA++0x0 line.byte 0x00 "GICDST0_SPI_PRIO170,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4CB++0x0 line.byte 0x00 "GICDST0_SPI_PRIO171,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4CC++0x0 line.byte 0x00 "GICDST0_SPI_PRIO172,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4CD++0x0 line.byte 0x00 "GICDST0_SPI_PRIO173,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4CE++0x0 line.byte 0x00 "GICDST0_SPI_PRIO174,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4CF++0x0 line.byte 0x00 "GICDST0_SPI_PRIO175,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D0++0x0 line.byte 0x00 "GICDST0_SPI_PRIO176,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D1++0x0 line.byte 0x00 "GICDST0_SPI_PRIO177,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D2++0x0 line.byte 0x00 "GICDST0_SPI_PRIO178,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D3++0x0 line.byte 0x00 "GICDST0_SPI_PRIO179,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D4++0x0 line.byte 0x00 "GICDST0_SPI_PRIO180,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D5++0x0 line.byte 0x00 "GICDST0_SPI_PRIO181,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D6++0x0 line.byte 0x00 "GICDST0_SPI_PRIO182,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D7++0x0 line.byte 0x00 "GICDST0_SPI_PRIO183,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D8++0x0 line.byte 0x00 "GICDST0_SPI_PRIO184,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4D9++0x0 line.byte 0x00 "GICDST0_SPI_PRIO185,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4DA++0x0 line.byte 0x00 "GICDST0_SPI_PRIO186,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4DB++0x0 line.byte 0x00 "GICDST0_SPI_PRIO187,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4DC++0x0 line.byte 0x00 "GICDST0_SPI_PRIO188,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4DD++0x0 line.byte 0x00 "GICDST0_SPI_PRIO189,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4DE++0x0 line.byte 0x00 "GICDST0_SPI_PRIO190,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4DF++0x0 line.byte 0x00 "GICDST0_SPI_PRIO191,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E0++0x0 line.byte 0x00 "GICDST0_SPI_PRIO192,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E1++0x0 line.byte 0x00 "GICDST0_SPI_PRIO193,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E2++0x0 line.byte 0x00 "GICDST0_SPI_PRIO194,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E3++0x0 line.byte 0x00 "GICDST0_SPI_PRIO195,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E4++0x0 line.byte 0x00 "GICDST0_SPI_PRIO196,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E5++0x0 line.byte 0x00 "GICDST0_SPI_PRIO197,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E6++0x0 line.byte 0x00 "GICDST0_SPI_PRIO198,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E7++0x0 line.byte 0x00 "GICDST0_SPI_PRIO199,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E8++0x0 line.byte 0x00 "GICDST0_SPI_PRIO200,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4E9++0x0 line.byte 0x00 "GICDST0_SPI_PRIO201,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4EA++0x0 line.byte 0x00 "GICDST0_SPI_PRIO202,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4EB++0x0 line.byte 0x00 "GICDST0_SPI_PRIO203,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4EC++0x0 line.byte 0x00 "GICDST0_SPI_PRIO204,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4ED++0x0 line.byte 0x00 "GICDST0_SPI_PRIO205,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4EE++0x0 line.byte 0x00 "GICDST0_SPI_PRIO206,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4EF++0x0 line.byte 0x00 "GICDST0_SPI_PRIO207,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F0++0x0 line.byte 0x00 "GICDST0_SPI_PRIO208,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F1++0x0 line.byte 0x00 "GICDST0_SPI_PRIO209,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F2++0x0 line.byte 0x00 "GICDST0_SPI_PRIO210,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F3++0x0 line.byte 0x00 "GICDST0_SPI_PRIO211,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F4++0x0 line.byte 0x00 "GICDST0_SPI_PRIO212,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F5++0x0 line.byte 0x00 "GICDST0_SPI_PRIO213,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F6++0x0 line.byte 0x00 "GICDST0_SPI_PRIO214,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F7++0x0 line.byte 0x00 "GICDST0_SPI_PRIO215,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F8++0x0 line.byte 0x00 "GICDST0_SPI_PRIO216,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4F9++0x0 line.byte 0x00 "GICDST0_SPI_PRIO217,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4FA++0x0 line.byte 0x00 "GICDST0_SPI_PRIO218,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4FB++0x0 line.byte 0x00 "GICDST0_SPI_PRIO219,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4FC++0x0 line.byte 0x00 "GICDST0_SPI_PRIO220,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4FD++0x0 line.byte 0x00 "GICDST0_SPI_PRIO221,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4FE++0x0 line.byte 0x00 "GICDST0_SPI_PRIO222,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x4FF++0x0 line.byte 0x00 "GICDST0_SPI_PRIO223,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x500++0x0 line.byte 0x00 "GICDST0_SPI_PRIO224,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x501++0x0 line.byte 0x00 "GICDST0_SPI_PRIO225,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x502++0x0 line.byte 0x00 "GICDST0_SPI_PRIO226,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x503++0x0 line.byte 0x00 "GICDST0_SPI_PRIO227,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x504++0x0 line.byte 0x00 "GICDST0_SPI_PRIO228,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x505++0x0 line.byte 0x00 "GICDST0_SPI_PRIO229,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x506++0x0 line.byte 0x00 "GICDST0_SPI_PRIO230,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x507++0x0 line.byte 0x00 "GICDST0_SPI_PRIO231,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x508++0x0 line.byte 0x00 "GICDST0_SPI_PRIO232,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x509++0x0 line.byte 0x00 "GICDST0_SPI_PRIO233,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x50A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO234,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x50B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO235,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x50C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO236,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x50D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO237,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x50E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO238,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x50F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO239,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x510++0x0 line.byte 0x00 "GICDST0_SPI_PRIO240,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x511++0x0 line.byte 0x00 "GICDST0_SPI_PRIO241,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x512++0x0 line.byte 0x00 "GICDST0_SPI_PRIO242,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x513++0x0 line.byte 0x00 "GICDST0_SPI_PRIO243,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x514++0x0 line.byte 0x00 "GICDST0_SPI_PRIO244,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x515++0x0 line.byte 0x00 "GICDST0_SPI_PRIO245,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x516++0x0 line.byte 0x00 "GICDST0_SPI_PRIO246,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x517++0x0 line.byte 0x00 "GICDST0_SPI_PRIO247,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x518++0x0 line.byte 0x00 "GICDST0_SPI_PRIO248,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x519++0x0 line.byte 0x00 "GICDST0_SPI_PRIO249,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x51A++0x0 line.byte 0x00 "GICDST0_SPI_PRIO250,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x51B++0x0 line.byte 0x00 "GICDST0_SPI_PRIO251,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x51C++0x0 line.byte 0x00 "GICDST0_SPI_PRIO252,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x51D++0x0 line.byte 0x00 "GICDST0_SPI_PRIO253,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x51E++0x0 line.byte 0x00 "GICDST0_SPI_PRIO254,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x51F++0x0 line.byte 0x00 "GICDST0_SPI_PRIO255,GICDST0 Shared Peripheral Interrupt Priority Register" bitfld.byte 0x00 0. " VALUE ,Priority" "0,1" group.byte 0x820++0x0 line.byte 0x00 "GICDST0_SPI_TRGT0,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x821++0x0 line.byte 0x00 "GICDST0_SPI_TRGT1,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x822++0x0 line.byte 0x00 "GICDST0_SPI_TRGT2,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x823++0x0 line.byte 0x00 "GICDST0_SPI_TRGT3,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x824++0x0 line.byte 0x00 "GICDST0_SPI_TRGT4,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x825++0x0 line.byte 0x00 "GICDST0_SPI_TRGT5,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x826++0x0 line.byte 0x00 "GICDST0_SPI_TRGT6,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x827++0x0 line.byte 0x00 "GICDST0_SPI_TRGT7,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x828++0x0 line.byte 0x00 "GICDST0_SPI_TRGT8,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x829++0x0 line.byte 0x00 "GICDST0_SPI_TRGT9,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x82A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT10,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x82B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT11,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x82C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT12,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x82D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT13,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x82E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT14,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x82F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT15,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x830++0x0 line.byte 0x00 "GICDST0_SPI_TRGT16,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x831++0x0 line.byte 0x00 "GICDST0_SPI_TRGT17,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x832++0x0 line.byte 0x00 "GICDST0_SPI_TRGT18,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x833++0x0 line.byte 0x00 "GICDST0_SPI_TRGT19,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x834++0x0 line.byte 0x00 "GICDST0_SPI_TRGT20,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x835++0x0 line.byte 0x00 "GICDST0_SPI_TRGT21,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x836++0x0 line.byte 0x00 "GICDST0_SPI_TRGT22,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x837++0x0 line.byte 0x00 "GICDST0_SPI_TRGT23,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x838++0x0 line.byte 0x00 "GICDST0_SPI_TRGT24,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x839++0x0 line.byte 0x00 "GICDST0_SPI_TRGT25,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x83A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT26,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x83B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT27,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x83C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT28,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x83D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT29,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x83E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT30,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x83F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT31,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x840++0x0 line.byte 0x00 "GICDST0_SPI_TRGT32,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x841++0x0 line.byte 0x00 "GICDST0_SPI_TRGT33,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x842++0x0 line.byte 0x00 "GICDST0_SPI_TRGT34,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x843++0x0 line.byte 0x00 "GICDST0_SPI_TRGT35,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x844++0x0 line.byte 0x00 "GICDST0_SPI_TRGT36,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x845++0x0 line.byte 0x00 "GICDST0_SPI_TRGT37,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x846++0x0 line.byte 0x00 "GICDST0_SPI_TRGT38,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x847++0x0 line.byte 0x00 "GICDST0_SPI_TRGT39,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x848++0x0 line.byte 0x00 "GICDST0_SPI_TRGT40,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x849++0x0 line.byte 0x00 "GICDST0_SPI_TRGT41,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x84A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT42,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x84B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT43,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x84C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT44,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x84D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT45,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x84E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT46,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x84F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT47,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x850++0x0 line.byte 0x00 "GICDST0_SPI_TRGT48,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x851++0x0 line.byte 0x00 "GICDST0_SPI_TRGT49,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x852++0x0 line.byte 0x00 "GICDST0_SPI_TRGT50,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x853++0x0 line.byte 0x00 "GICDST0_SPI_TRGT51,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x854++0x0 line.byte 0x00 "GICDST0_SPI_TRGT52,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x855++0x0 line.byte 0x00 "GICDST0_SPI_TRGT53,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x856++0x0 line.byte 0x00 "GICDST0_SPI_TRGT54,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x857++0x0 line.byte 0x00 "GICDST0_SPI_TRGT55,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x858++0x0 line.byte 0x00 "GICDST0_SPI_TRGT56,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x859++0x0 line.byte 0x00 "GICDST0_SPI_TRGT57,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x85A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT58,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x85B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT59,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x85C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT60,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x85D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT61,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x85E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT62,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x85F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT63,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x860++0x0 line.byte 0x00 "GICDST0_SPI_TRGT64,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x861++0x0 line.byte 0x00 "GICDST0_SPI_TRGT65,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x862++0x0 line.byte 0x00 "GICDST0_SPI_TRGT66,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x863++0x0 line.byte 0x00 "GICDST0_SPI_TRGT67,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x864++0x0 line.byte 0x00 "GICDST0_SPI_TRGT68,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x865++0x0 line.byte 0x00 "GICDST0_SPI_TRGT69,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x866++0x0 line.byte 0x00 "GICDST0_SPI_TRGT70,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x867++0x0 line.byte 0x00 "GICDST0_SPI_TRGT71,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x868++0x0 line.byte 0x00 "GICDST0_SPI_TRGT72,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x869++0x0 line.byte 0x00 "GICDST0_SPI_TRGT73,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x86A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT74,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x86B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT75,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x86C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT76,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x86D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT77,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x86E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT78,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x86F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT79,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x870++0x0 line.byte 0x00 "GICDST0_SPI_TRGT80,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x871++0x0 line.byte 0x00 "GICDST0_SPI_TRGT81,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x872++0x0 line.byte 0x00 "GICDST0_SPI_TRGT82,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x873++0x0 line.byte 0x00 "GICDST0_SPI_TRGT83,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x874++0x0 line.byte 0x00 "GICDST0_SPI_TRGT84,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x875++0x0 line.byte 0x00 "GICDST0_SPI_TRGT85,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x876++0x0 line.byte 0x00 "GICDST0_SPI_TRGT86,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x877++0x0 line.byte 0x00 "GICDST0_SPI_TRGT87,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x878++0x0 line.byte 0x00 "GICDST0_SPI_TRGT88,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x879++0x0 line.byte 0x00 "GICDST0_SPI_TRGT89,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x87A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT90,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x87B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT91,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x87C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT92,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x87D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT93,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x87E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT94,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x87F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT95,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x880++0x0 line.byte 0x00 "GICDST0_SPI_TRGT96,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x881++0x0 line.byte 0x00 "GICDST0_SPI_TRGT97,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x882++0x0 line.byte 0x00 "GICDST0_SPI_TRGT98,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x883++0x0 line.byte 0x00 "GICDST0_SPI_TRGT99,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x884++0x0 line.byte 0x00 "GICDST0_SPI_TRGT100,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x885++0x0 line.byte 0x00 "GICDST0_SPI_TRGT101,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x886++0x0 line.byte 0x00 "GICDST0_SPI_TRGT102,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x887++0x0 line.byte 0x00 "GICDST0_SPI_TRGT103,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x888++0x0 line.byte 0x00 "GICDST0_SPI_TRGT104,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x889++0x0 line.byte 0x00 "GICDST0_SPI_TRGT105,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x88A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT106,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x88B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT107,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x88C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT108,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x88D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT109,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x88E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT110,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x88F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT111,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x890++0x0 line.byte 0x00 "GICDST0_SPI_TRGT112,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x891++0x0 line.byte 0x00 "GICDST0_SPI_TRGT113,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x892++0x0 line.byte 0x00 "GICDST0_SPI_TRGT114,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x893++0x0 line.byte 0x00 "GICDST0_SPI_TRGT115,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x894++0x0 line.byte 0x00 "GICDST0_SPI_TRGT116,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x895++0x0 line.byte 0x00 "GICDST0_SPI_TRGT117,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x896++0x0 line.byte 0x00 "GICDST0_SPI_TRGT118,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x897++0x0 line.byte 0x00 "GICDST0_SPI_TRGT119,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x898++0x0 line.byte 0x00 "GICDST0_SPI_TRGT120,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x899++0x0 line.byte 0x00 "GICDST0_SPI_TRGT121,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x89A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT122,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x89B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT123,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x89C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT124,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x89D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT125,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x89E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT126,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x89F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT127,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A0++0x0 line.byte 0x00 "GICDST0_SPI_TRGT128,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A1++0x0 line.byte 0x00 "GICDST0_SPI_TRGT129,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A2++0x0 line.byte 0x00 "GICDST0_SPI_TRGT130,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A3++0x0 line.byte 0x00 "GICDST0_SPI_TRGT131,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A4++0x0 line.byte 0x00 "GICDST0_SPI_TRGT132,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A5++0x0 line.byte 0x00 "GICDST0_SPI_TRGT133,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A6++0x0 line.byte 0x00 "GICDST0_SPI_TRGT134,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A7++0x0 line.byte 0x00 "GICDST0_SPI_TRGT135,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A8++0x0 line.byte 0x00 "GICDST0_SPI_TRGT136,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8A9++0x0 line.byte 0x00 "GICDST0_SPI_TRGT137,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8AA++0x0 line.byte 0x00 "GICDST0_SPI_TRGT138,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8AB++0x0 line.byte 0x00 "GICDST0_SPI_TRGT139,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8AC++0x0 line.byte 0x00 "GICDST0_SPI_TRGT140,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8AD++0x0 line.byte 0x00 "GICDST0_SPI_TRGT141,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8AE++0x0 line.byte 0x00 "GICDST0_SPI_TRGT142,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8AF++0x0 line.byte 0x00 "GICDST0_SPI_TRGT143,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B0++0x0 line.byte 0x00 "GICDST0_SPI_TRGT144,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B1++0x0 line.byte 0x00 "GICDST0_SPI_TRGT145,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B2++0x0 line.byte 0x00 "GICDST0_SPI_TRGT146,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B3++0x0 line.byte 0x00 "GICDST0_SPI_TRGT147,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B4++0x0 line.byte 0x00 "GICDST0_SPI_TRGT148,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B5++0x0 line.byte 0x00 "GICDST0_SPI_TRGT149,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B6++0x0 line.byte 0x00 "GICDST0_SPI_TRGT150,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B7++0x0 line.byte 0x00 "GICDST0_SPI_TRGT151,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B8++0x0 line.byte 0x00 "GICDST0_SPI_TRGT152,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8B9++0x0 line.byte 0x00 "GICDST0_SPI_TRGT153,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8BA++0x0 line.byte 0x00 "GICDST0_SPI_TRGT154,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8BB++0x0 line.byte 0x00 "GICDST0_SPI_TRGT155,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8BC++0x0 line.byte 0x00 "GICDST0_SPI_TRGT156,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8BD++0x0 line.byte 0x00 "GICDST0_SPI_TRGT157,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8BE++0x0 line.byte 0x00 "GICDST0_SPI_TRGT158,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8BF++0x0 line.byte 0x00 "GICDST0_SPI_TRGT159,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C0++0x0 line.byte 0x00 "GICDST0_SPI_TRGT160,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C1++0x0 line.byte 0x00 "GICDST0_SPI_TRGT161,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C2++0x0 line.byte 0x00 "GICDST0_SPI_TRGT162,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C3++0x0 line.byte 0x00 "GICDST0_SPI_TRGT163,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C4++0x0 line.byte 0x00 "GICDST0_SPI_TRGT164,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C5++0x0 line.byte 0x00 "GICDST0_SPI_TRGT165,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C6++0x0 line.byte 0x00 "GICDST0_SPI_TRGT166,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C7++0x0 line.byte 0x00 "GICDST0_SPI_TRGT167,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C8++0x0 line.byte 0x00 "GICDST0_SPI_TRGT168,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8C9++0x0 line.byte 0x00 "GICDST0_SPI_TRGT169,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8CA++0x0 line.byte 0x00 "GICDST0_SPI_TRGT170,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8CB++0x0 line.byte 0x00 "GICDST0_SPI_TRGT171,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8CC++0x0 line.byte 0x00 "GICDST0_SPI_TRGT172,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8CD++0x0 line.byte 0x00 "GICDST0_SPI_TRGT173,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8CE++0x0 line.byte 0x00 "GICDST0_SPI_TRGT174,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8CF++0x0 line.byte 0x00 "GICDST0_SPI_TRGT175,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D0++0x0 line.byte 0x00 "GICDST0_SPI_TRGT176,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D1++0x0 line.byte 0x00 "GICDST0_SPI_TRGT177,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D2++0x0 line.byte 0x00 "GICDST0_SPI_TRGT178,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D3++0x0 line.byte 0x00 "GICDST0_SPI_TRGT179,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D4++0x0 line.byte 0x00 "GICDST0_SPI_TRGT180,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D5++0x0 line.byte 0x00 "GICDST0_SPI_TRGT181,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D6++0x0 line.byte 0x00 "GICDST0_SPI_TRGT182,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D7++0x0 line.byte 0x00 "GICDST0_SPI_TRGT183,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D8++0x0 line.byte 0x00 "GICDST0_SPI_TRGT184,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8D9++0x0 line.byte 0x00 "GICDST0_SPI_TRGT185,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8DA++0x0 line.byte 0x00 "GICDST0_SPI_TRGT186,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8DB++0x0 line.byte 0x00 "GICDST0_SPI_TRGT187,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8DC++0x0 line.byte 0x00 "GICDST0_SPI_TRGT188,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8DD++0x0 line.byte 0x00 "GICDST0_SPI_TRGT189,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8DE++0x0 line.byte 0x00 "GICDST0_SPI_TRGT190,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8DF++0x0 line.byte 0x00 "GICDST0_SPI_TRGT191,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E0++0x0 line.byte 0x00 "GICDST0_SPI_TRGT192,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E1++0x0 line.byte 0x00 "GICDST0_SPI_TRGT193,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E2++0x0 line.byte 0x00 "GICDST0_SPI_TRGT194,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E3++0x0 line.byte 0x00 "GICDST0_SPI_TRGT195,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E4++0x0 line.byte 0x00 "GICDST0_SPI_TRGT196,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E5++0x0 line.byte 0x00 "GICDST0_SPI_TRGT197,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E6++0x0 line.byte 0x00 "GICDST0_SPI_TRGT198,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E7++0x0 line.byte 0x00 "GICDST0_SPI_TRGT199,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E8++0x0 line.byte 0x00 "GICDST0_SPI_TRGT200,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8E9++0x0 line.byte 0x00 "GICDST0_SPI_TRGT201,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8EA++0x0 line.byte 0x00 "GICDST0_SPI_TRGT202,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8EB++0x0 line.byte 0x00 "GICDST0_SPI_TRGT203,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8EC++0x0 line.byte 0x00 "GICDST0_SPI_TRGT204,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8ED++0x0 line.byte 0x00 "GICDST0_SPI_TRGT205,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8EE++0x0 line.byte 0x00 "GICDST0_SPI_TRGT206,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8EF++0x0 line.byte 0x00 "GICDST0_SPI_TRGT207,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F0++0x0 line.byte 0x00 "GICDST0_SPI_TRGT208,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F1++0x0 line.byte 0x00 "GICDST0_SPI_TRGT209,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F2++0x0 line.byte 0x00 "GICDST0_SPI_TRGT210,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F3++0x0 line.byte 0x00 "GICDST0_SPI_TRGT211,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F4++0x0 line.byte 0x00 "GICDST0_SPI_TRGT212,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F5++0x0 line.byte 0x00 "GICDST0_SPI_TRGT213,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F6++0x0 line.byte 0x00 "GICDST0_SPI_TRGT214,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F7++0x0 line.byte 0x00 "GICDST0_SPI_TRGT215,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F8++0x0 line.byte 0x00 "GICDST0_SPI_TRGT216,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8F9++0x0 line.byte 0x00 "GICDST0_SPI_TRGT217,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8FA++0x0 line.byte 0x00 "GICDST0_SPI_TRGT218,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8FB++0x0 line.byte 0x00 "GICDST0_SPI_TRGT219,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8FC++0x0 line.byte 0x00 "GICDST0_SPI_TRGT220,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8FD++0x0 line.byte 0x00 "GICDST0_SPI_TRGT221,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8FE++0x0 line.byte 0x00 "GICDST0_SPI_TRGT222,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x8FF++0x0 line.byte 0x00 "GICDST0_SPI_TRGT223,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x900++0x0 line.byte 0x00 "GICDST0_SPI_TRGT224,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x901++0x0 line.byte 0x00 "GICDST0_SPI_TRGT225,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x902++0x0 line.byte 0x00 "GICDST0_SPI_TRGT226,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x903++0x0 line.byte 0x00 "GICDST0_SPI_TRGT227,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x904++0x0 line.byte 0x00 "GICDST0_SPI_TRGT228,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x905++0x0 line.byte 0x00 "GICDST0_SPI_TRGT229,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x906++0x0 line.byte 0x00 "GICDST0_SPI_TRGT230,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x907++0x0 line.byte 0x00 "GICDST0_SPI_TRGT231,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x908++0x0 line.byte 0x00 "GICDST0_SPI_TRGT232,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x909++0x0 line.byte 0x00 "GICDST0_SPI_TRGT233,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x90A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT234,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x90B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT235,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x90C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT236,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x90D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT237,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x90E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT238,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x90F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT239,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x910++0x0 line.byte 0x00 "GICDST0_SPI_TRGT240,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x911++0x0 line.byte 0x00 "GICDST0_SPI_TRGT241,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x912++0x0 line.byte 0x00 "GICDST0_SPI_TRGT242,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x913++0x0 line.byte 0x00 "GICDST0_SPI_TRGT243,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x914++0x0 line.byte 0x00 "GICDST0_SPI_TRGT244,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x915++0x0 line.byte 0x00 "GICDST0_SPI_TRGT245,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x916++0x0 line.byte 0x00 "GICDST0_SPI_TRGT246,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x917++0x0 line.byte 0x00 "GICDST0_SPI_TRGT247,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x918++0x0 line.byte 0x00 "GICDST0_SPI_TRGT248,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x919++0x0 line.byte 0x00 "GICDST0_SPI_TRGT249,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x91A++0x0 line.byte 0x00 "GICDST0_SPI_TRGT250,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x91B++0x0 line.byte 0x00 "GICDST0_SPI_TRGT251,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x91C++0x0 line.byte 0x00 "GICDST0_SPI_TRGT252,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x91D++0x0 line.byte 0x00 "GICDST0_SPI_TRGT253,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x91E++0x0 line.byte 0x00 "GICDST0_SPI_TRGT254,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.byte 0x91F++0x0 line.byte 0x00 "GICDST0_SPI_TRGT255,GICDST0 Shared Peripheral Interrupt Processor Targets Register" group.long 0xC08++0x3 line.long 0x00 "GICDST0_SPI_CFG0,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC0C++0x3 line.long 0x00 "GICDST0_SPI_CFG1,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC10++0x3 line.long 0x00 "GICDST0_SPI_CFG2,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC14++0x3 line.long 0x00 "GICDST0_SPI_CFG3,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC18++0x3 line.long 0x00 "GICDST0_SPI_CFG4,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC1C++0x3 line.long 0x00 "GICDST0_SPI_CFG5,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC20++0x3 line.long 0x00 "GICDST0_SPI_CFG6,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC24++0x3 line.long 0x00 "GICDST0_SPI_CFG7,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC28++0x3 line.long 0x00 "GICDST0_SPI_CFG8,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC2C++0x3 line.long 0x00 "GICDST0_SPI_CFG9,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC30++0x3 line.long 0x00 "GICDST0_SPI_CFG10,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC34++0x3 line.long 0x00 "GICDST0_SPI_CFG11,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC38++0x3 line.long 0x00 "GICDST0_SPI_CFG12,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC3C++0x3 line.long 0x00 "GICDST0_SPI_CFG13,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC40++0x3 line.long 0x00 "GICDST0_SPI_CFG14,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xC44++0x3 line.long 0x00 "GICDST0_SPI_CFG15,GICDST0 Shared Peripheral Interrupt Configuration Register" group.long 0xD04++0x3 line.long 0x00 "GICDST0_SPI0,GICDST0 Shared Peripheral Interrupt Register" group.long 0xD08++0x3 line.long 0x00 "GICDST0_SPI1,GICDST0 Shared Peripheral Interrupt Register" group.long 0xD0C++0x3 line.long 0x00 "GICDST0_SPI2,GICDST0 Shared Peripheral Interrupt Register" group.long 0xD10++0x3 line.long 0x00 "GICDST0_SPI3,GICDST0 Shared Peripheral Interrupt Register" group.long 0xD14++0x3 line.long 0x00 "GICDST0_SPI4,GICDST0 Shared Peripheral Interrupt Register" group.long 0xD18++0x3 line.long 0x00 "GICDST0_SPI5,GICDST0 Shared Peripheral Interrupt Register" group.long 0xD1C++0x3 line.long 0x00 "GICDST0_SPI6,GICDST0 Shared Peripheral Interrupt Register" group.long 0xD20++0x3 line.long 0x00 "GICDST0_SPI7,GICDST0 Shared Peripheral Interrupt Register" group.long 0xF00++0x3 line.long 0x00 "GICDST0_SGI_CTL,GICDST0 Software Generated Interrupt Control Register" bitfld.long 0x00 24.--25. " TRGLSTFILT ,Target List Filter" "0,1,2,3" hexmask.long.byte 0x00 16.--23. 1. " CPUTRGTLST ,CPU Target list" bitfld.long 0x00 15. " SATT ,Security Value of the SGI" "0,1" bitfld.long 0x00 0.--3. " SGIINTID ,The Interrupt ID of the SGI" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree.end tree "HADC (Analog Subsystem)" base ad:0x31017000 width 16. group.long 0x0++0x3 line.long 0x00 "HADC0_CTL,HADC0 Control Register" bitfld.long 0x00 13. " ENLS ,Enable Level Shifters" "0,1" bitfld.long 0x00 12. " DOUTOREOCB ,Serial data on DOUT." "0,1" bitfld.long 0x00 8.--11. " FIXEDCNV ,Fixed Conversion" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 7. " CONT ,Continuous Conversion" "0,1" newline bitfld.long 0x00 3.--6. " FDIV ,Frequency Divider" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " STARTCNV ,Start conversion." "0,1" bitfld.long 0x00 1. " PD ,Power down." "0,1" bitfld.long 0x00 0. " NRST ,Reset." "0,1" group.long 0x4++0x3 line.long 0x00 "HADC0_CHAN_MSK,HADC0 Channel Mask Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Mask for Each Channel" group.long 0x8++0x3 line.long 0x00 "HADC0_IMSK,HADC0 Interrupt Mask Register" bitfld.long 0x00 17. " RDY ,Mask interrupt when ADC ready to convert" "0,1" bitfld.long 0x00 16. " SEQ ,Mask interrupt at end of sequence completion" "0,1" hexmask.long.word 0x00 0.--15. 1. " CHAN ,Channel Mask" group.long 0xC++0x3 line.long 0x00 "HADC0_STAT,HADC0 Status Register" hexmask.long.word 0x00 4.--19. 1. " INTRW1C ,Conversion Complete Interrupt" bitfld.long 0x00 3. " SEQOVRW1C ,End of Sequence Conversion" "0,1" bitfld.long 0x00 2. " RDYW1C ,Ready to Convert" "0,1" bitfld.long 0x00 0. " RDY ,ADC Ready" "0,1" group.long 0x10++0x3 line.long 0x00 "HADC0_DATA00,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x14++0x3 line.long 0x00 "HADC0_DATA01,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x18++0x3 line.long 0x00 "HADC0_DATA02,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x1C++0x3 line.long 0x00 "HADC0_DATA03,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x20++0x3 line.long 0x00 "HADC0_DATA04,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x24++0x3 line.long 0x00 "HADC0_DATA05,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x28++0x3 line.long 0x00 "HADC0_DATA06,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x2C++0x3 line.long 0x00 "HADC0_DATA07,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x30++0x3 line.long 0x00 "HADC0_DATA08,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x34++0x3 line.long 0x00 "HADC0_DATA09,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x38++0x3 line.long 0x00 "HADC0_DATA10,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x3C++0x3 line.long 0x00 "HADC0_DATA11,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x40++0x3 line.long 0x00 "HADC0_DATA12,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x44++0x3 line.long 0x00 "HADC0_DATA13,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x48++0x3 line.long 0x00 "HADC0_DATA14,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" group.long 0x4C++0x3 line.long 0x00 "HADC0_DATA15,HADC0 Channel Data Registers" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Converted Data" tree.end tree "HAE (Harmonic Analysis Engine)" base ad:0x310180A0 width 16. group.long 0x0++0x3 line.long 0x00 "HAE0_RUN,HAE0 Run Register" bitfld.long 0x00 0. " RUN ,Run/Stop" "0,1" group.long 0xA60++0x3 line.long 0x00 "HAE0_CFG0,HAE0 Configuration 0 Register" bitfld.long 0x00 7. " RXIRQEN ,Receive IRQ Enable" "0,1" bitfld.long 0x00 6. " TXIRQEN ,Transmit IRQ Enable" "0,1" bitfld.long 0x00 1. " LFREQ ,Line Frequency Select" "0,1" group.long 0xA64++0x3 line.long 0x00 "HAE0_CFG1,HAE0 Configuration 1 Register" hexmask.long.word 0x00 0.--14. 1. " STARTDIV ,Start (Clock) Divider" group.long 0xA68++0x3 line.long 0x00 "HAE0_CFG2,HAE0 Configuration 2 Register" bitfld.long 0x00 6. " EN ,Enable Clock" "0,1" bitfld.long 0x00 3.--5. " UPDATE ,Update Rate Select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--2. " SETTLE ,Settle Period Select" "0,1,2,3" bitfld.long 0x00 0. " MODE ,(Results) Mode Select" "0,1" group.long 0xA6C++0x3 line.long 0x00 "HAE0_CFG3,HAE0 Configuration 3 Register" hexmask.long.word 0x00 0.--12. 1. " CHANEN ,Channel n Enable" group.long 0xA80++0x3 line.long 0x00 "HAE0_STAT,HAE0 Status Register" bitfld.long 0x00 2. " RDY ,Ready Status" "0,1" bitfld.long 0x00 1. " RXIRQ ,Receive IRQ Status" "0,1" bitfld.long 0x00 0. " TXIRQ ,Transmit IRQ Status" "0,1" group.long 0xAA0++0x3 line.long 0x00 "HAE0_ISAMPLE,HAE0 I (Current) Sample Register" hexmask.long.tbyte 0x00 0.--23. 1. " VALUE ,Current Input Sample" group.long 0xAA4++0x3 line.long 0x00 "HAE0_VSAMPLE,HAE0 V (Voltage) Sample Register" hexmask.long.tbyte 0x00 0.--23. 1. " VALUE ,Voltage Input Sample" group.long 0xAE0++0x3 line.long 0x00 "HAE0_IWAVEFORM,HAE0 I (Current) Waveform Register" hexmask.long.tbyte 0x00 0.--23. 1. " VALUE ,Current Waveform" group.long 0xAE4++0x3 line.long 0x00 "HAE0_VWAVEFORM,HAE0 V (Voltage) Waveform Register" hexmask.long.tbyte 0x00 0.--23. 1. " VALUE ,Voltage Waveform" group.long 0x1D60++0x3 line.long 0x00 "HAE0_CFG4,HAE0 Configuration 4 Register" bitfld.long 0x00 1. " DIDTEN ,di/dt (Sensor) Enable" "0,1" bitfld.long 0x00 0. " HPFEN ,High-Pass Filter Enable" "0,1" group.long 0x1D64++0x3 line.long 0x00 "HAE0_DIDT_GAIN,HAE0 DIDT Gain Register" hexmask.long 0x00 0.--27. 1. " VALUE ,di/dt Sensor Gain" group.long 0x1D68++0x3 line.long 0x00 "HAE0_DIDT_COEF,HAE0 DIDT Coefficient Register" hexmask.long 0x00 0.--27. 1. " VALUE ,di/dt Coefficient" group.long 0x1D70++0x3 line.long 0x00 "HAE0_VLEVEL,HAE0 Voltage Level Register" hexmask.long 0x00 0.--27. 1. " VALUE ,Voltage Input Level" group.long 0x1D8C++0x3 line.long 0x00 "HAE0_H00_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1D90++0x3 line.long 0x00 "HAE0_H01_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1D94++0x3 line.long 0x00 "HAE0_H02_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1D98++0x3 line.long 0x00 "HAE0_H03_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1D9C++0x3 line.long 0x00 "HAE0_H04_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1DA0++0x3 line.long 0x00 "HAE0_H05_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1DA4++0x3 line.long 0x00 "HAE0_H06_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1DA8++0x3 line.long 0x00 "HAE0_H07_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1DAC++0x3 line.long 0x00 "HAE0_H08_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1DB0++0x3 line.long 0x00 "HAE0_H09_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1DB4++0x3 line.long 0x00 "HAE0_H10_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x1DB8++0x3 line.long 0x00 "HAE0_H11_INDX,HAE0 Harmonic n Index Register" bitfld.long 0x00 0.--5. " VALUE ,Harmonic n Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" tree.end tree "IIR (IIR Accelerator)" base ad:0x310C4000 width 19. group.long 0x0++0x3 line.long 0x00 "IIR0_CTL1,IIR0 Global Control Register" bitfld.long 0x00 14.--16. " RND ,Rounding Mode" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12. " FORTYBIT ,40-Bit Floating-Point Boundary Select" "0,1" bitfld.long 0x00 11. " CCINTR ,Channel Complete Interrupt" "0,1" bitfld.long 0x00 10. " SS ,Save Biquad State" "0,1" newline bitfld.long 0x00 9. " CAI ,Channel Auto Iterate" "0,1" bitfld.long 0x00 8. " DMAEN ,DMA Enable" "0,1" bitfld.long 0x00 1.--5. " CH ,Number of Channels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,IIR Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "IIR0_DMASTAT,IIR0 DMA Status Register" bitfld.long 0x00 7.--11. " CURCHNL ,Current Channel" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6. " ACDONE ,All Channels Done" "0,1" bitfld.long 0x00 5. " WDONE ,Current Channel Done" "0,1" bitfld.long 0x00 4. " SVDK ,Save Updated Dk State" "0,1" newline bitfld.long 0x00 3. " WRBK ,Write Back" "0,1" bitfld.long 0x00 2. " PPGS ,MAC Processing in Progress" "0,1" bitfld.long 0x00 1. " CDKLD ,Coefficient and Dk Loading" "0,1" bitfld.long 0x00 0. " CPLD ,Chain Pointer Loading Status" "0,1" group.long 0x8++0x3 line.long 0x00 "IIR0_MACSTAT,IIR0 MAC Status Register" bitfld.long 0x00 5. " AINV ,Addition Invalid" "0,1" bitfld.long 0x00 4. " ARI ,Adder Result Infinity" "0,1" bitfld.long 0x00 3. " ARZ ,Adder Result Zero" "0,1" bitfld.long 0x00 2. " MINV ,Multiply Invalid" "0,1" newline bitfld.long 0x00 1. " MRI ,Multiplier Result Infinity" "0,1" bitfld.long 0x00 0. " MRZ ,Multiplier Result Zero" "0,1" group.long 0xC++0x3 line.long 0x00 "IIR0_DBG_CTL,IIR0 IIR Debug Control Register" bitfld.long 0x00 5. " ADRINC ,Address Auto Increment" "0,1" bitfld.long 0x00 4. " MEM ,Local Memory Access" "0,1" bitfld.long 0x00 2. " RUN ,Release the MAC" "0,1" bitfld.long 0x00 1. " HLD ,Hold or Single Step" "0,1" newline bitfld.long 0x00 0. " EN ,Debug Mode Enable" "0,1" group.long 0x10++0x3 line.long 0x00 "IIR0_DBG_ADDR,IIR0 IIR Debug Address Register" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Debug Address, Coefficient Memory Select" group.long 0x14++0x3 line.long 0x00 "IIR0_DBG_WRDAT_LO,IIR0 IIR Debug Write Data Low Register" group.long 0x18++0x3 line.long 0x00 "IIR0_DBG_WRDAT_HI,IIR0 IIR Debug Write Data High Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Debug Write Data Highest 8 Bits" group.long 0x1C++0x3 line.long 0x00 "IIR0_DBG_RDDAT_LO,IIR0 IIR Debug Read Data Low Register" group.long 0x20++0x3 line.long 0x00 "IIR0_DBG_RDDAT_HI,IIR0 IIR Debug Read Data High Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Debug Read Data Highest 8 Bits" group.long 0x40++0x3 line.long 0x00 "IIR0_CTL2,IIR0 Channel Control Register" hexmask.long.word 0x00 14.--23. 1. " WINDOW ,Window Size Parameter" bitfld.long 0x00 0.--3. " BIQUADS ,Number of Biquads" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x44++0x3 line.long 0x00 "IIR0_INIDX,IIR0 Input Data Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Input Data Buffer Index" group.long 0x48++0x3 line.long 0x00 "IIR0_INMOD,IIR0 Input Data Index Modifier Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Input Data Buffer Index Modifier" group.long 0x4C++0x3 line.long 0x00 "IIR0_INLEN,IIR0 Input Data Buffer Length Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Input Data Buffer Length" group.long 0x50++0x3 line.long 0x00 "IIR0_INBASE,IIR0 Input Buffer Base Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Input Data Buffer Base" group.long 0x54++0x3 line.long 0x00 "IIR0_OUTIDX,IIR0 Output Data Buffer Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Output Data Buffer Index" group.long 0x58++0x3 line.long 0x00 "IIR0_OUTMOD,IIR0 IIR Output Data Index Modifier Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Input Data Buffer Index Modifier" group.long 0x5C++0x3 line.long 0x00 "IIR0_OUTLEN,IIR0 IIR Output Data Buffer Length Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Output Data Buffer Length" group.long 0x60++0x3 line.long 0x00 "IIR0_OUTBASE,IIR0 Output Buffer Base Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Output Buffer Base" group.long 0x64++0x3 line.long 0x00 "IIR0_COEFIDX,IIR0 Coefficient Buffer Index Register" hexmask.long 0x00 0.--29. 1. " VALUE ,Coefficient Buffer Index" group.long 0x68++0x3 line.long 0x00 "IIR0_COEFMOD,IIR0 Coefficient Index Modifier Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Coefficient Modifier" group.long 0x6C++0x3 line.long 0x00 "IIR0_COEFLEN,IIR0 Coefficient Buffer Length Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Coefficient Length" group.long 0x70++0x3 line.long 0x00 "IIR0_CHNPTR,IIR0 Chain Pointer Register" hexmask.long 0x00 0.--29. 1. " VALUE ,IIR Chain Pointer Address" tree.end tree "L2CTL (L2 Memory Controller)" tree "L2CTL0" base ad:0x31080000 width 17. group.long 0x0++0x3 line.long 0x00 "L2CTL0_CTL,L2CTL0 Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 16. " DISURP ,Disable Urgent Request Priority" "0,1" bitfld.long 0x00 15. " ECCMAP7 ,ECC Map Bank 7" "0,1" bitfld.long 0x00 14. " ECCMAP6 ,ECC Map Bank 6" "0,1" newline bitfld.long 0x00 13. " ECCMAP5 ,ECC Map Bank 5" "0,1" bitfld.long 0x00 12. " ECCMAP4 ,ECC Map Bank 4" "0,1" bitfld.long 0x00 11. " ECCMAP3 ,ECC Map Bank 3" "0,1" bitfld.long 0x00 10. " ECCMAP2 ,ECC Map Bank 2" "0,1" newline bitfld.long 0x00 9. " ECCMAP1 ,ECC Map Bank 1" "0,1" bitfld.long 0x00 8. " ECCMAP0 ,ECC Map Bank 0" "0,1" bitfld.long 0x00 7. " BK7EDIS ,Bank 7 ECC Disable" "0,1" bitfld.long 0x00 6. " BK6EDIS ,Bank 6 ECC Disable" "0,1" newline bitfld.long 0x00 5. " BK5EDIS ,Bank 5 ECC Disable" "0,1" bitfld.long 0x00 4. " BK4EDIS ,Bank 4 ECC Disable" "0,1" bitfld.long 0x00 3. " BK3EDIS ,Bank 3 ECC Disable" "0,1" bitfld.long 0x00 2. " BK2EDIS ,Bank 2 ECC Disable" "0,1" newline bitfld.long 0x00 1. " BK1EDIS ,Bank 1 ECC Disable" "0,1" bitfld.long 0x00 0. " BK0EDIS ,Bank 0 ECC Disable" "0,1" group.long 0x10++0x3 line.long 0x00 "L2CTL0_STAT,L2CTL0 Status Register" bitfld.long 0x00 15. " ECCERR7 ,ECC Error Bank 7" "0,1" bitfld.long 0x00 14. " ECCERR6 ,ECC Error Bank 6" "0,1" bitfld.long 0x00 13. " ECCERR5 ,ECC Error Bank 5" "0,1" bitfld.long 0x00 12. " ECCERR4 ,ECC Error Bank 4" "0,1" newline bitfld.long 0x00 11. " ECCERR3 ,ECC Error Bank 3" "0,1" bitfld.long 0x00 10. " ECCERR2 ,ECC Error Bank 2" "0,1" bitfld.long 0x00 9. " ECCERR1 ,ECC Error Bank 1" "0,1" bitfld.long 0x00 8. " ECCERR0 ,ECC Error Bank 0" "0,1" newline bitfld.long 0x00 4. " RFRS ,Refresh Register Status" "0,1" bitfld.long 0x00 1. " ERR1 ,Error Port 1" "0,1" bitfld.long 0x00 0. " ERR0 ,Error Port 0" "0,1" group.long 0x14++0x3 line.long 0x00 "L2CTL0_RPCR,L2CTL0 Read Priority Count Register" hexmask.long.byte 0x00 8.--15. 1. " RPC1 ,Read Priority Count 1" hexmask.long.byte 0x00 0.--7. 1. " RPC0 ,Read Priority Count 0" group.long 0x18++0x3 line.long 0x00 "L2CTL0_WPCR,L2CTL0 Write Priority Count Register" hexmask.long.byte 0x00 8.--15. 1. " WPC1 ,Write Priority Count 1" hexmask.long.byte 0x00 0.--7. 1. " WPC0 ,Write Priority Count 0" group.long 0x24++0x3 line.long 0x00 "L2CTL0_RFA,L2CTL0 Refresh Address Register" hexmask.long.word 0x00 16.--31. 1. " ADDRHI ,Address High" hexmask.long.word 0x00 0.--15. 1. " ADDRLO ,Address Low" group.long 0x40++0x3 line.long 0x00 "L2CTL0_ERRADDR0,L2CTL0 ECC Error Address 0 Register" group.long 0x44++0x3 line.long 0x00 "L2CTL0_ERRADDR1,L2CTL0 ECC Error Address 1 Register" group.long 0x48++0x3 line.long 0x00 "L2CTL0_ERRADDR2,L2CTL0 ECC Error Address 2 Register" group.long 0x4C++0x3 line.long 0x00 "L2CTL0_ERRADDR3,L2CTL0 ECC Error Address 3 Register" group.long 0x50++0x3 line.long 0x00 "L2CTL0_ERRADDR4,L2CTL0 ECC Error Address 4 Register" group.long 0x54++0x3 line.long 0x00 "L2CTL0_ERRADDR5,L2CTL0 ECC Error Address 5 Register" group.long 0x58++0x3 line.long 0x00 "L2CTL0_ERRADDR6,L2CTL0 ECC Error Address 6 Register" group.long 0x5C++0x3 line.long 0x00 "L2CTL0_ERRADDR7,L2CTL0 ECC Error Address 7 Register" group.long 0x80++0x3 line.long 0x00 "L2CTL0_ET0,L2CTL0 Error Type 0 Register" hexmask.long.word 0x00 8.--20. 1. " ID ,Error ID" bitfld.long 0x00 4. " RDWR ,Read/Write Error" "0,1" bitfld.long 0x00 3. " ECCERR ,ECC Error" "0,1" bitfld.long 0x00 2. " ACCERR ,Access Error" "0,1" newline bitfld.long 0x00 0. " ROMERR ,ROM Error" "0,1" group.long 0x84++0x3 line.long 0x00 "L2CTL0_EADDR0,L2CTL0 Error Type 0 Address Register" group.long 0x88++0x3 line.long 0x00 "L2CTL0_ET1,L2CTL0 Error Type 1 Register" hexmask.long.word 0x00 8.--20. 1. " ID ,Error ID" bitfld.long 0x00 4. " RDWR ,Read/Write Error" "0,1" bitfld.long 0x00 3. " ECCERR ,ECC Error" "0,1" bitfld.long 0x00 2. " ACCERR ,Access Error" "0,1" newline bitfld.long 0x00 0. " ROMERR ,ROM Error" "0,1" group.long 0x8C++0x3 line.long 0x00 "L2CTL0_EADDR1,L2CTL0 Error Type 1 Address Register" tree.end tree "L2CTL1" base ad:0x31081000 width 17. group.long 0x0++0x3 line.long 0x00 "L2CTL1_CTL,L2CTL1 Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 16. " DISURP ,Disable Urgent Request Priority" "0,1" bitfld.long 0x00 15. " ECCMAP7 ,ECC Map Bank 7" "0,1" bitfld.long 0x00 14. " ECCMAP6 ,ECC Map Bank 6" "0,1" newline bitfld.long 0x00 13. " ECCMAP5 ,ECC Map Bank 5" "0,1" bitfld.long 0x00 12. " ECCMAP4 ,ECC Map Bank 4" "0,1" bitfld.long 0x00 11. " ECCMAP3 ,ECC Map Bank 3" "0,1" bitfld.long 0x00 10. " ECCMAP2 ,ECC Map Bank 2" "0,1" newline bitfld.long 0x00 9. " ECCMAP1 ,ECC Map Bank 1" "0,1" bitfld.long 0x00 8. " ECCMAP0 ,ECC Map Bank 0" "0,1" bitfld.long 0x00 7. " BK7EDIS ,Bank 7 ECC Disable" "0,1" bitfld.long 0x00 6. " BK6EDIS ,Bank 6 ECC Disable" "0,1" newline bitfld.long 0x00 5. " BK5EDIS ,Bank 5 ECC Disable" "0,1" bitfld.long 0x00 4. " BK4EDIS ,Bank 4 ECC Disable" "0,1" bitfld.long 0x00 3. " BK3EDIS ,Bank 3 ECC Disable" "0,1" bitfld.long 0x00 2. " BK2EDIS ,Bank 2 ECC Disable" "0,1" newline bitfld.long 0x00 1. " BK1EDIS ,Bank 1 ECC Disable" "0,1" bitfld.long 0x00 0. " BK0EDIS ,Bank 0 ECC Disable" "0,1" group.long 0x10++0x3 line.long 0x00 "L2CTL1_STAT,L2CTL1 Status Register" bitfld.long 0x00 15. " ECCERR7 ,ECC Error Bank 7" "0,1" bitfld.long 0x00 14. " ECCERR6 ,ECC Error Bank 6" "0,1" bitfld.long 0x00 13. " ECCERR5 ,ECC Error Bank 5" "0,1" bitfld.long 0x00 12. " ECCERR4 ,ECC Error Bank 4" "0,1" newline bitfld.long 0x00 11. " ECCERR3 ,ECC Error Bank 3" "0,1" bitfld.long 0x00 10. " ECCERR2 ,ECC Error Bank 2" "0,1" bitfld.long 0x00 9. " ECCERR1 ,ECC Error Bank 1" "0,1" bitfld.long 0x00 8. " ECCERR0 ,ECC Error Bank 0" "0,1" newline bitfld.long 0x00 4. " RFRS ,Refresh Register Status" "0,1" bitfld.long 0x00 1. " ERR1 ,Error Port 1" "0,1" bitfld.long 0x00 0. " ERR0 ,Error Port 0" "0,1" group.long 0x14++0x3 line.long 0x00 "L2CTL1_RPCR,L2CTL1 Read Priority Count Register" hexmask.long.byte 0x00 8.--15. 1. " RPC1 ,Read Priority Count 1" hexmask.long.byte 0x00 0.--7. 1. " RPC0 ,Read Priority Count 0" group.long 0x18++0x3 line.long 0x00 "L2CTL1_WPCR,L2CTL1 Write Priority Count Register" hexmask.long.byte 0x00 8.--15. 1. " WPC1 ,Write Priority Count 1" hexmask.long.byte 0x00 0.--7. 1. " WPC0 ,Write Priority Count 0" group.long 0x24++0x3 line.long 0x00 "L2CTL1_RFA,L2CTL1 Refresh Address Register" hexmask.long.word 0x00 16.--31. 1. " ADDRHI ,Address High" hexmask.long.word 0x00 0.--15. 1. " ADDRLO ,Address Low" group.long 0x40++0x3 line.long 0x00 "L2CTL1_ERRADDR0,L2CTL1 ECC Error Address 0 Register" group.long 0x44++0x3 line.long 0x00 "L2CTL1_ERRADDR1,L2CTL1 ECC Error Address 1 Register" group.long 0x48++0x3 line.long 0x00 "L2CTL1_ERRADDR2,L2CTL1 ECC Error Address 2 Register" group.long 0x4C++0x3 line.long 0x00 "L2CTL1_ERRADDR3,L2CTL1 ECC Error Address 3 Register" group.long 0x50++0x3 line.long 0x00 "L2CTL1_ERRADDR4,L2CTL1 ECC Error Address 4 Register" group.long 0x54++0x3 line.long 0x00 "L2CTL1_ERRADDR5,L2CTL1 ECC Error Address 5 Register" group.long 0x58++0x3 line.long 0x00 "L2CTL1_ERRADDR6,L2CTL1 ECC Error Address 6 Register" group.long 0x5C++0x3 line.long 0x00 "L2CTL1_ERRADDR7,L2CTL1 ECC Error Address 7 Register" group.long 0x80++0x3 line.long 0x00 "L2CTL1_ET0,L2CTL1 Error Type 0 Register" hexmask.long.word 0x00 8.--20. 1. " ID ,Error ID" bitfld.long 0x00 4. " RDWR ,Read/Write Error" "0,1" bitfld.long 0x00 3. " ECCERR ,ECC Error" "0,1" bitfld.long 0x00 2. " ACCERR ,Access Error" "0,1" newline bitfld.long 0x00 0. " ROMERR ,ROM Error" "0,1" group.long 0x84++0x3 line.long 0x00 "L2CTL1_EADDR0,L2CTL1 Error Type 0 Address Register" group.long 0x88++0x3 line.long 0x00 "L2CTL1_ET1,L2CTL1 Error Type 1 Register" hexmask.long.word 0x00 8.--20. 1. " ID ,Error ID" bitfld.long 0x00 4. " RDWR ,Read/Write Error" "0,1" bitfld.long 0x00 3. " ECCERR ,ECC Error" "0,1" bitfld.long 0x00 2. " ACCERR ,Access Error" "0,1" newline bitfld.long 0x00 0. " ROMERR ,ROM Error" "0,1" group.long 0x8C++0x3 line.long 0x00 "L2CTL1_EADDR1,L2CTL1 Error Type 1 Address Register" tree.end tree "L2CTL2" base ad:0x31082000 width 17. group.long 0x0++0x3 line.long 0x00 "L2CTL2_CTL,L2CTL2 Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 16. " DISURP ,Disable Urgent Request Priority" "0,1" bitfld.long 0x00 15. " ECCMAP7 ,ECC Map Bank 7" "0,1" bitfld.long 0x00 14. " ECCMAP6 ,ECC Map Bank 6" "0,1" newline bitfld.long 0x00 13. " ECCMAP5 ,ECC Map Bank 5" "0,1" bitfld.long 0x00 12. " ECCMAP4 ,ECC Map Bank 4" "0,1" bitfld.long 0x00 11. " ECCMAP3 ,ECC Map Bank 3" "0,1" bitfld.long 0x00 10. " ECCMAP2 ,ECC Map Bank 2" "0,1" newline bitfld.long 0x00 9. " ECCMAP1 ,ECC Map Bank 1" "0,1" bitfld.long 0x00 8. " ECCMAP0 ,ECC Map Bank 0" "0,1" bitfld.long 0x00 7. " BK7EDIS ,Bank 7 ECC Disable" "0,1" bitfld.long 0x00 6. " BK6EDIS ,Bank 6 ECC Disable" "0,1" newline bitfld.long 0x00 5. " BK5EDIS ,Bank 5 ECC Disable" "0,1" bitfld.long 0x00 4. " BK4EDIS ,Bank 4 ECC Disable" "0,1" bitfld.long 0x00 3. " BK3EDIS ,Bank 3 ECC Disable" "0,1" bitfld.long 0x00 2. " BK2EDIS ,Bank 2 ECC Disable" "0,1" newline bitfld.long 0x00 1. " BK1EDIS ,Bank 1 ECC Disable" "0,1" bitfld.long 0x00 0. " BK0EDIS ,Bank 0 ECC Disable" "0,1" group.long 0x10++0x3 line.long 0x00 "L2CTL2_STAT,L2CTL2 Status Register" bitfld.long 0x00 15. " ECCERR7 ,ECC Error Bank 7" "0,1" bitfld.long 0x00 14. " ECCERR6 ,ECC Error Bank 6" "0,1" bitfld.long 0x00 13. " ECCERR5 ,ECC Error Bank 5" "0,1" bitfld.long 0x00 12. " ECCERR4 ,ECC Error Bank 4" "0,1" newline bitfld.long 0x00 11. " ECCERR3 ,ECC Error Bank 3" "0,1" bitfld.long 0x00 10. " ECCERR2 ,ECC Error Bank 2" "0,1" bitfld.long 0x00 9. " ECCERR1 ,ECC Error Bank 1" "0,1" bitfld.long 0x00 8. " ECCERR0 ,ECC Error Bank 0" "0,1" newline bitfld.long 0x00 4. " RFRS ,Refresh Register Status" "0,1" bitfld.long 0x00 1. " ERR1 ,Error Port 1" "0,1" bitfld.long 0x00 0. " ERR0 ,Error Port 0" "0,1" group.long 0x14++0x3 line.long 0x00 "L2CTL2_RPCR,L2CTL2 Read Priority Count Register" hexmask.long.byte 0x00 8.--15. 1. " RPC1 ,Read Priority Count 1" hexmask.long.byte 0x00 0.--7. 1. " RPC0 ,Read Priority Count 0" group.long 0x18++0x3 line.long 0x00 "L2CTL2_WPCR,L2CTL2 Write Priority Count Register" hexmask.long.byte 0x00 8.--15. 1. " WPC1 ,Write Priority Count 1" hexmask.long.byte 0x00 0.--7. 1. " WPC0 ,Write Priority Count 0" group.long 0x24++0x3 line.long 0x00 "L2CTL2_RFA,L2CTL2 Refresh Address Register" hexmask.long.word 0x00 16.--31. 1. " ADDRHI ,Address High" hexmask.long.word 0x00 0.--15. 1. " ADDRLO ,Address Low" group.long 0x40++0x3 line.long 0x00 "L2CTL2_ERRADDR0,L2CTL2 ECC Error Address 0 Register" group.long 0x44++0x3 line.long 0x00 "L2CTL2_ERRADDR1,L2CTL2 ECC Error Address 1 Register" group.long 0x48++0x3 line.long 0x00 "L2CTL2_ERRADDR2,L2CTL2 ECC Error Address 2 Register" group.long 0x4C++0x3 line.long 0x00 "L2CTL2_ERRADDR3,L2CTL2 ECC Error Address 3 Register" group.long 0x50++0x3 line.long 0x00 "L2CTL2_ERRADDR4,L2CTL2 ECC Error Address 4 Register" group.long 0x54++0x3 line.long 0x00 "L2CTL2_ERRADDR5,L2CTL2 ECC Error Address 5 Register" group.long 0x58++0x3 line.long 0x00 "L2CTL2_ERRADDR6,L2CTL2 ECC Error Address 6 Register" group.long 0x5C++0x3 line.long 0x00 "L2CTL2_ERRADDR7,L2CTL2 ECC Error Address 7 Register" group.long 0x80++0x3 line.long 0x00 "L2CTL2_ET0,L2CTL2 Error Type 0 Register" hexmask.long.word 0x00 8.--20. 1. " ID ,Error ID" bitfld.long 0x00 4. " RDWR ,Read/Write Error" "0,1" bitfld.long 0x00 3. " ECCERR ,ECC Error" "0,1" bitfld.long 0x00 2. " ACCERR ,Access Error" "0,1" newline bitfld.long 0x00 0. " ROMERR ,ROM Error" "0,1" group.long 0x84++0x3 line.long 0x00 "L2CTL2_EADDR0,L2CTL2 Error Type 0 Address Register" group.long 0x88++0x3 line.long 0x00 "L2CTL2_ET1,L2CTL2 Error Type 1 Register" hexmask.long.word 0x00 8.--20. 1. " ID ,Error ID" bitfld.long 0x00 4. " RDWR ,Read/Write Error" "0,1" bitfld.long 0x00 3. " ECCERR ,ECC Error" "0,1" bitfld.long 0x00 2. " ACCERR ,Access Error" "0,1" newline bitfld.long 0x00 0. " ROMERR ,ROM Error" "0,1" group.long 0x8C++0x3 line.long 0x00 "L2CTL2_EADDR1,L2CTL2 Error Type 1 Address Register" tree.end tree.end tree "LP (Link Port)" tree "LP0" base ad:0x30FFE000 width 16. group.long 0x0++0x3 line.long 0x00 "LP0_CTL,LP0 Control Register" bitfld.long 0x00 11. " ROVFMSK ,Receive FIFO Overflow Interrupt Mask" "0,1" bitfld.long 0x00 9. " RRQMSK ,Receive Request Interrupt Mask" "0,1" bitfld.long 0x00 8. " TRQMSK ,Transmit Request Interrupt Mask" "0,1" bitfld.long 0x00 3. " TRAN ,Transfer Direction" "0,1" newline bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "LP0_STAT,LP0 Status Register" bitfld.long 0x00 8. " LPBS ,Bus Status" "0,1" bitfld.long 0x00 7. " LPACK ,Buffer Pack Status" "0,1" bitfld.long 0x00 4.--6. " FFST ,FIFO Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " ROVF ,Receive FIFO Overflow Interrupt" "0,1" newline bitfld.long 0x00 1. " LRRQ ,Receive Request" "0,1" bitfld.long 0x00 0. " LTRQ ,Transmit Request" "0,1" group.long 0x8++0x3 line.long 0x00 "LP0_DIV,LP0 Clock Divider Value Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Divisor Value" group.long 0x10++0x3 line.long 0x00 "LP0_TX,LP0 Transmit Buffer Register" group.long 0x14++0x3 line.long 0x00 "LP0_RX,LP0 Receive Buffer Register" group.long 0x18++0x3 line.long 0x00 "LP0_TXIN_SHDW,LP0 Shadow Input Transmit Buffer Register" group.long 0x1C++0x3 line.long 0x00 "LP0_TXOUT_SHDW,LP0 Shadow Output Transmit Buffer Register" tree.end tree "LP1" base ad:0x30FFE100 width 16. group.long 0x0++0x3 line.long 0x00 "LP1_CTL,LP1 Control Register" bitfld.long 0x00 11. " ROVFMSK ,Receive FIFO Overflow Interrupt Mask" "0,1" bitfld.long 0x00 9. " RRQMSK ,Receive Request Interrupt Mask" "0,1" bitfld.long 0x00 8. " TRQMSK ,Transmit Request Interrupt Mask" "0,1" bitfld.long 0x00 3. " TRAN ,Transfer Direction" "0,1" newline bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "LP1_STAT,LP1 Status Register" bitfld.long 0x00 8. " LPBS ,Bus Status" "0,1" bitfld.long 0x00 7. " LPACK ,Buffer Pack Status" "0,1" bitfld.long 0x00 4.--6. " FFST ,FIFO Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 3. " ROVF ,Receive FIFO Overflow Interrupt" "0,1" newline bitfld.long 0x00 1. " LRRQ ,Receive Request" "0,1" bitfld.long 0x00 0. " LTRQ ,Transmit Request" "0,1" group.long 0x8++0x3 line.long 0x00 "LP1_DIV,LP1 Clock Divider Value Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Divisor Value" group.long 0x10++0x3 line.long 0x00 "LP1_TX,LP1 Transmit Buffer Register" group.long 0x14++0x3 line.long 0x00 "LP1_RX,LP1 Receive Buffer Register" group.long 0x18++0x3 line.long 0x00 "LP1_TXIN_SHDW,LP1 Shadow Input Transmit Buffer Register" group.long 0x1C++0x3 line.long 0x00 "LP1_TXOUT_SHDW,LP1 Shadow Output Transmit Buffer Register" tree.end tree.end tree "M6CPH0" base ad:0x310C5000 width 19. group.long 0x0++0x3 line.long 0x00 "M6CPH0_CTL,M6CPH0 M6 Wrapper Control register" bitfld.long 0x00 31. " DMAWRSTAT ,Memory write DMA status" "0,1" bitfld.long 0x00 30. " DMARDSTAT ,Memory read DMA status" "0,1" bitfld.long 0x00 8. " DMARDEN ,DMA Read Channel Enable" "0,1" bitfld.long 0x00 1. " DMAWREN ,DMA Write Channel Enable" "0,1" newline bitfld.long 0x00 0. " EN ,M6 cipher Encrypt/Decrypt Enable" "0,1" group.long 0x38++0x3 line.long 0x00 "M6CPH0_WRMOD,M6CPH0 Write DMA Modifier" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Write DMA Modifier" group.long 0x3C++0x3 line.long 0x00 "M6CPH0_RDMOD,M6CPH0 Read DMA Modifier" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Read DMA Modifier" group.long 0x40++0x3 line.long 0x00 "M6CPH0_WRINDX,M6CPH0 Memory Write Index" hexmask.long 0x00 0.--29. 1. " VALUE ,Write DMA Index" group.long 0x44++0x3 line.long 0x00 "M6CPH0_RDINDX,M6CPH0 Memory Read Index" hexmask.long 0x00 0.--29. 1. " VALUE ,Read DMA Index" group.long 0x58++0x3 line.long 0x00 "M6CPH0_WRCNT,M6CPH0 Write DMA Counter" hexmask.long 0x00 0.--29. 1. " VALUE ,Write DMA Count" group.long 0x5C++0x3 line.long 0x00 "M6CPH0_RDCNT,M6CPH0 Read DMA Counter" hexmask.long 0x00 0.--29. 1. " VALUE ,Read DMA Count" group.long 0x80++0x3 line.long 0x00 "M6CPH0_DATA,M6CPH0 M6 Cipher Engine Data Register" group.long 0x84++0x3 line.long 0x00 "M6CPH0_KEY_HI,M6CPH0 M6 Cipher Engine Key High Register" group.long 0x88++0x3 line.long 0x00 "M6CPH0_KEY_LO,M6CPH0 M6 Cipher Engine Key Low Register" group.long 0x8C++0x3 line.long 0x00 "M6CPH0_ENGINE_CTL,M6CPH0 M6 Cipher Engine Control Register" bitfld.long 0x00 31. " INIT ,Initialize" "0,1" bitfld.long 0x00 30. " FLUSH ,Flush/Reset Data Buffers. Resets the baseline cipher state information and all internal data buffers." "0,1" bitfld.long 0x00 29. " EDMODE ,Encryption/Decryption Mode Indicator. Sets the operating mode of the M6 cipher engine.When INIT = 1 writes to this bit are stored. Otherwise, they are ignored." "0,1" bitfld.long 0x00 28. " RDIEN ,Interrupt Enable on Full Read Buffer. Indicates that an interrupt will be generated when the output (read) buffer is full.When INIT = 1 writes to this bit are stored. Otherwise, they are ignored." "0,1" newline bitfld.long 0x00 27. " WRIEN ,Interrupt Enable on Empty Write Buffer. Indicates that an interrupt will be generated when the input (write) buffer is empty.When INIT = 1 writes to this bit are stored. Otherwise, they are ignored." "0,1" bitfld.long 0x00 26. " DMARD ,DMA Transfer Read. Indicates that a DMA transfer will be used at the data output (read) side. When INIT = 1 writes to this bit are stored. Otherwise, they are ignored." "0,1" bitfld.long 0x00 25. " DMAWR ,DMA Transfer Write. Indicates that a DMA transfer will be used at the data input (write) side.When INIT = 1 writes to this bit are stored. Otherwise, they are ignored." "0,1" hexmask.long.word 0x00 0.--15. 1. " KEYDLY ,Key Delay Vector. Specifies the number of encryption frames that are handled using the old encryption/decryption key before the new key is introduced in the M6 baseline cipher block." group.long 0x90++0x3 line.long 0x00 "M6CPH0_ENCRSZ,M6CPH0 M6 Cipher Engine Encryption size register" group.long 0x94++0x3 line.long 0x00 "M6CPH0_STAT,M6CPH0 M6 Cipher Engine status register" bitfld.long 0x00 31. " WREMPTY ,Write Buffer Empty" "0,1" bitfld.long 0x00 15. " RDFULL ,Read Buffer Full" "0,1" bitfld.long 0x00 0. " INVALIDSZ ,Invalid Encryption Frame Size" "0,1" tree.end tree "MLB (Media Local Bus)" base ad:0x3109D000 width 12. group.long 0x0++0x3 line.long 0x00 "MLB0_CTL0,MLB0 MediaLB Control 0 Register" bitfld.long 0x00 15.--17. " FCNT ,Frames Per Sub-buffer" "0,1,2,3,4,5,6,7" bitfld.long 0x00 14. " CTLRETRY ,Control Tx Packet Retry" "0,1" bitfld.long 0x00 12. " ASYRETRY ,Asynchronous Tx Packet Retry" "0,1" bitfld.long 0x00 7. " LKSTAT ,Lock Status" "0,1" newline bitfld.long 0x00 5. " PEN ,6-pin Enable" "0,1" bitfld.long 0x00 2.--4. " CLK ,Clock Speed Select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x8++0x3 line.long 0x00 "MLB0_PCTL0,MLB0 MediaLB 6-pin Control 0 Register" bitfld.long 0x00 1. " CMRES ,MediaLB 6-pin common mode resistor enable" "0,1" group.long 0xC++0x3 line.long 0x00 "MLB0_MS0,MLB0 Channel Status 0 Register" group.long 0x14++0x3 line.long 0x00 "MLB0_MS1,MLB0 Channel Status 1 Register" group.long 0x20++0x3 line.long 0x00 "MLB0_MSS,MLB0 System Status Register" bitfld.long 0x00 5. " SERVREQ ,Service Request Enable" "0,1" bitfld.long 0x00 4. " SWSYSCMD ,Software System Command Detected" "0,1" bitfld.long 0x00 3. " CSSYSCMD ,Channel Scan System Command Detected" "0,1" bitfld.long 0x00 2. " ULKSYSCMD ,Network Unlock System Command Detected" "0,1" newline bitfld.long 0x00 1. " LKSYSCMD ,Network Lock System Command Detected" "0,1" bitfld.long 0x00 0. " RSTSYSCMD ,Reset System Command Detected" "0,1" group.long 0x24++0x3 line.long 0x00 "MLB0_MSD,MLB0 System Data Register" hexmask.long.byte 0x00 24.--31. 1. " SD3 ,System Data Byte 3 (MSB)" hexmask.long.byte 0x00 16.--23. 1. " SD2 ,System Data Byte 2" hexmask.long.byte 0x00 8.--15. 1. " SD1 ,System Data Byte 1" hexmask.long.byte 0x00 0.--7. 1. " SD0 ,System Data Byte 0 (LSB)" group.long 0x2C++0x3 line.long 0x00 "MLB0_MIEN,MLB0 Interrupt Enable Register" bitfld.long 0x00 29. " CTXBREAK ,Control Transmit Break Enable" "0,1" bitfld.long 0x00 28. " CTXPE ,Control Transmit Protocol Error Enable" "0,1" bitfld.long 0x00 27. " CTXDONE ,Control Transmit Packet Done Enable" "0,1" bitfld.long 0x00 26. " CRXBREAK ,Control Receive Break Enable" "0,1" newline bitfld.long 0x00 25. " CRXPE ,Control Receive Protocol Error Enable" "0,1" bitfld.long 0x00 24. " CRXDONE ,Control Receive Packet Done Enable" "0,1" bitfld.long 0x00 22. " ATXBREAK ,Asynchronous Transmit Break Enable" "0,1" bitfld.long 0x00 21. " ATXPE ,Asynchronous Transmit Protocol Error Enable" "0,1" newline bitfld.long 0x00 20. " ATXDONE ,Asynchronous Transmit Done Enable" "0,1" bitfld.long 0x00 19. " ARXBREAK ,Asynchronous Receive Break Enable" "0,1" bitfld.long 0x00 18. " ARXPE ,Asynchronous Receive Protocol Error Enable" "0,1" bitfld.long 0x00 17. " ARXDONE ,Asynchronous Receive Packet Done Enable" "0,1" newline bitfld.long 0x00 16. " SYNCPE ,Synchronous Protocol Error Enable" "0,1" bitfld.long 0x00 1. " ISOCBUFO ,Isochronous Receive Buffer Overflow Enable" "0,1" bitfld.long 0x00 0. " ISOCPE ,Isochronous Receive Protocol Error Enable" "0,1" group.long 0x34++0x3 line.long 0x00 "MLB0_GCTL,MLB0 MLB Global Control Register" bitfld.long 0x00 2. " CLKOUTSEL ,CLKOUT Select" "0,1" bitfld.long 0x00 1. " CLKOUTEN ,CLKOUT Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "MLB0_CTL1,MLB0 Control 1 Register" hexmask.long.byte 0x00 8.--15. 1. " NDA ,Node Device Address" bitfld.long 0x00 7. " CLKM ,Lock Missing Status" "0,1" bitfld.long 0x00 6. " LOCK ,Lock Error Status" "0,1" group.long 0x80++0x3 line.long 0x00 "MLB0_HCTL,MLB0 HBI Control Register" bitfld.long 0x00 15. " EN ,HBI Enable" "0,1" bitfld.long 0x00 1. " RST1 ,AGU1 Software Reset" "0,1" bitfld.long 0x00 0. " RST0 ,AGU0 Software Reset" "0,1" group.long 0x88++0x3 line.long 0x00 "MLB0_HCMR0,MLB0 HBI Channel Mask 0 Register" group.long 0x8C++0x3 line.long 0x00 "MLB0_HCMR1,MLB0 HBI Channel Mask 1 Register" group.long 0x90++0x3 line.long 0x00 "MLB0_HCER0,MLB0 HBI Channel Error 0 Register" group.long 0x94++0x3 line.long 0x00 "MLB0_HCER1,MLB0 HBI Channel Error 1 Register" group.long 0x98++0x3 line.long 0x00 "MLB0_HCBR0,MLB0 HBI Channel Busy 0 Register" group.long 0x9C++0x3 line.long 0x00 "MLB0_HCBR1,MLB0 HBI Channel Busy 1 Register" group.long 0xC0++0x3 line.long 0x00 "MLB0_MDAT0,MLB0 Memory Interface Control Data 0 Register" group.long 0xC4++0x3 line.long 0x00 "MLB0_MDAT1,MLB0 Memory Interface Control Data 1 Register" group.long 0xC8++0x3 line.long 0x00 "MLB0_MDAT2,MLB0 Memory Interface Control Data 2 Register" group.long 0xCC++0x3 line.long 0x00 "MLB0_MDAT3,MLB0 Memory Interface Control Data 3 Register" group.long 0xD0++0x3 line.long 0x00 "MLB0_MDWE0,MLB0 Memory Interface Control Data Write Enable 0 Register" group.long 0xD4++0x3 line.long 0x00 "MLB0_MDWE1,MLB0 Memory Interface Control Data Write Enable 1 Register" group.long 0xD8++0x3 line.long 0x00 "MLB0_MDWE2,MLB0 Memory Interface Control Data Write Enable 2 Register" group.long 0xDC++0x3 line.long 0x00 "MLB0_MDWE3,MLB0 Memory Interface Control Data Write Enable 3 Register" group.long 0xE0++0x3 line.long 0x00 "MLB0_MCTL,MLB0 Memory Interface Control Register" bitfld.long 0x00 0. " XCMP ,Transfer Complete (Write 0 to clear)" "0,1" group.long 0xE4++0x3 line.long 0x00 "MLB0_MADR,MLB0 Memory Interface Address Register" bitfld.long 0x00 31. " WNR ,Write-Not-Read" "0,1" bitfld.long 0x00 30. " TB ,Target Bit" "0,1" hexmask.long.byte 0x00 8.--15. 1. " ADDRH ,Address Higher Bits" hexmask.long.byte 0x00 0.--7. 1. " ADDRL ,Address Lower Bits" group.long 0x3C0++0x3 line.long 0x00 "MLB0_ACTL,MLB0 Bus Control Register" bitfld.long 0x00 4. " MPB ,Packet Buffering Mode" "0,1" bitfld.long 0x00 2. " DMAMODE ,DMA Mode" "0,1" bitfld.long 0x00 1. " SMX ,Interrupt Multiplex Enable" "0,1" bitfld.long 0x00 0. " SCE ,Software Clear Enable" "0,1" group.long 0x3D0++0x3 line.long 0x00 "MLB0_ACSR0,MLB0 Peripheral Channel Status 0 Register" group.long 0x3D4++0x3 line.long 0x00 "MLB0_ACSR1,MLB0 Peripheral Channel Status 1 Register" group.long 0x3D8++0x3 line.long 0x00 "MLB0_ACMR0,MLB0 Peripheral Channel Mask 0 Register" group.long 0x3DC++0x3 line.long 0x00 "MLB0_ACMR1,MLB0 Peripheral Channel Mask 1 Register" tree.end sif !cpuis("ADSP-SC584")&&!cpuis("ADSP-SC584W") tree "MSI (Mobile Storage Interface)" base ad:0x31010000 width 15. group.long 0x0++0x3 line.long 0x00 "MSI0_CTL,MSI0 Control Register" bitfld.long 0x00 25. " INTDMAC ,Use Internal DMA Controller" "0,1" bitfld.long 0x00 8. " RDABORT ,Abort Read Data" "0,1" bitfld.long 0x00 7. " IRQRESP ,Send IRQ Response" "0,1" bitfld.long 0x00 6. " RDWAIT ,Read Wait" "0,1" newline bitfld.long 0x00 5. " DMAEN ,DMA Enable" "0,1" bitfld.long 0x00 4. " INTEN ,Global Interrupt Enable" "0,1" bitfld.long 0x00 2. " DMARST ,DMA Reset" "0,1" bitfld.long 0x00 1. " FIFORST ,FIFO Reset" "0,1" newline bitfld.long 0x00 0. " CTLRST ,Controller Reset" "0,1" group.long 0x8++0x3 line.long 0x00 "MSI0_CLKDIV,MSI0 Clock Divider Register" hexmask.long.byte 0x00 0.--7. 1. " DIV0 ,Divider 0" group.long 0x10++0x3 line.long 0x00 "MSI0_CLKEN,MSI0 Clock Enable Register" bitfld.long 0x00 16. " LP0 ,Clock Low Power Mode for Card 0" "0,1" bitfld.long 0x00 0. " EN0 ,MSI Clock Enable for Card 0" "0,1" group.long 0x14++0x3 line.long 0x00 "MSI0_TMOUT,MSI0 Timeout Register" hexmask.long.tbyte 0x00 8.--31. 1. " DATA ,Data Timeout" hexmask.long.byte 0x00 0.--7. 1. " RESPONSE ,Response Timeout" group.long 0x18++0x3 line.long 0x00 "MSI0_CTYPE,MSI0 Card Type Register" bitfld.long 0x00 16. " WIDBYTE0 ,Width Byte 0" "0,1" bitfld.long 0x00 0. " WIDNIB0 ,Width Nibble 0" "0,1" group.long 0x1C++0x3 line.long 0x00 "MSI0_BLKSIZ,MSI0 Block Size Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Block Size" group.long 0x20++0x3 line.long 0x00 "MSI0_BYTCNT,MSI0 Byte Count Register" group.long 0x24++0x3 line.long 0x00 "MSI0_IMSK,MSI0 Interrupt Mask Register" hexmask.long.word 0x00 16.--31. 1. " SDIOMSK0 ,SDIO Interrupt Mask for SDIO Device 0" bitfld.long 0x00 15. " EBE ,End-bit Error (Read)/Write no CRC" "0,1" bitfld.long 0x00 14. " ACD ,Auto Command Done" "0,1" bitfld.long 0x00 13. " SBEBCI ,Start Bit Error(SBE)/Busy Complete Interrupt (BCI)" "0,1" newline bitfld.long 0x00 12. " HLE ,Hardware Locked Write Error" "0,1" bitfld.long 0x00 11. " FRUN ,FIFO Underrun/Overrun Error" "0,1" bitfld.long 0x00 10. " HTO ,Data Starvation by Host Timeout" "0,1" bitfld.long 0x00 9. " DRTO ,Data Read Timeout" "0,1" newline bitfld.long 0x00 8. " RTO ,Response Timeout" "0,1" bitfld.long 0x00 7. " DCRC ,Data CRC Error" "0,1" bitfld.long 0x00 6. " RCRC ,Response CRC Error" "0,1" bitfld.long 0x00 5. " RXDR ,Receive FIFO Data Request" "0,1" newline bitfld.long 0x00 4. " TXDR ,Transmit FIFO Data Request" "0,1" bitfld.long 0x00 3. " DTO ,Data Transfer Over" "0,1" bitfld.long 0x00 2. " CMDDONE ,Command Done" "0,1" bitfld.long 0x00 1. " RE ,Response Error" "0,1" newline bitfld.long 0x00 0. " CD ,Card Detect" "0,1" group.long 0x28++0x3 line.long 0x00 "MSI0_CMDARG,MSI0 Command Argument Register" group.long 0x2C++0x3 line.long 0x00 "MSI0_CMD,MSI0 Command Register" bitfld.long 0x00 31. " STARTCMD ,Start Command" "0,1" bitfld.long 0x00 29. " USEHOLDREG ,Use Hold Reg" "0,1" bitfld.long 0x00 27. " BOOTMODE ,Boot Mode" "0,1" bitfld.long 0x00 26. " BOOTDIS ,Disable Boot" "0,1" newline bitfld.long 0x00 25. " XPECTBOOTACK ,Expect Boot Ack" "0,1" bitfld.long 0x00 24. " BOOTEN ,Enable Boot" "0,1" bitfld.long 0x00 21. " UCLKREGS ,Update Clock Registers Only" "0,1" bitfld.long 0x00 16.--20. " CARDNUM ,Card Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 15. " SENDINIT ,Send Initialization" "0,1" bitfld.long 0x00 14. " STPABORTCMD ,Stop Abort Cmd" "0,1" bitfld.long 0x00 13. " WTPRIVDATA ,Wait Prvdata Complete" "0,1" bitfld.long 0x00 12. " SENDASTOP ,Send Auto Stop" "0,1" newline bitfld.long 0x00 11. " XFRMODE ,Transfer Mode" "0,1" bitfld.long 0x00 10. " RDWR ,Read from or Write to Card" "0,1" bitfld.long 0x00 9. " DXPECT ,Data Expected" "0,1" bitfld.long 0x00 8. " CHKRESPCRC ,Check Response CRC" "0,1" newline bitfld.long 0x00 7. " RLEN ,Response Length" "0,1" bitfld.long 0x00 6. " RXPECT ,Response Expect" "0,1" bitfld.long 0x00 0.--5. " INDX ,Command Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x30++0x3 line.long 0x00 "MSI0_RESP0,MSI0 Response Register 0" group.long 0x34++0x3 line.long 0x00 "MSI0_RESP1,MSI0 Response Register 1" group.long 0x38++0x3 line.long 0x00 "MSI0_RESP2,MSI0 Response Register 2" group.long 0x3C++0x3 line.long 0x00 "MSI0_RESP3,MSI0 Response Register 3" group.long 0x40++0x3 line.long 0x00 "MSI0_MSKISTAT,MSI0 Masked Interrupt Status Register" bitfld.long 0x00 16. " SDIOINT0 ,SDIO Interrupt for Device 0" "0,1" bitfld.long 0x00 15. " EBE ,End-bit Error" "0,1" bitfld.long 0x00 14. " ACD ,Auto Command Done" "0,1" bitfld.long 0x00 13. " SBEBCI ,Start Bit Error (SBE)/Busy Complete Interrupt (BCI)" "0,1" newline bitfld.long 0x00 12. " HLE ,Hardware Locked Write Error" "0,1" bitfld.long 0x00 11. " FRUN ,FIFO Underrun/Overrun Error" "0,1" bitfld.long 0x00 10. " HTO ,Data Starvation by Host Timeout" "0,1" bitfld.long 0x00 9. " DRTO ,Data Read Timeout" "0,1" newline bitfld.long 0x00 8. " RTO ,Response Timeout" "0,1" bitfld.long 0x00 7. " DCRC ,Data CRC Error" "0,1" bitfld.long 0x00 6. " RCRC ,Response CRC Error" "0,1" bitfld.long 0x00 5. " RXDR ,Receive FIFO Data Request" "0,1" newline bitfld.long 0x00 4. " TXDR ,Transmit FIFO Data Request" "0,1" bitfld.long 0x00 3. " DTO ,Data Transfer Over" "0,1" bitfld.long 0x00 2. " CMDDONE ,Command Done" "0,1" bitfld.long 0x00 1. " RE ,Response Error" "0,1" newline bitfld.long 0x00 0. " CD ,Card Detect" "0,1" group.long 0x44++0x3 line.long 0x00 "MSI0_ISTAT,MSI0 Raw Interrupt Status Register" bitfld.long 0x00 16. " SDIOINT0 ,SDIO Interrupt for Device 0" "0,1" bitfld.long 0x00 15. " EBE ,End-bit Error" "0,1" bitfld.long 0x00 14. " ACD ,Auto Command Done" "0,1" bitfld.long 0x00 13. " SBEBCI ,Start Bit Error Busy Complete Interrupt" "0,1" newline bitfld.long 0x00 12. " HLE ,Hardware Locked Write Error" "0,1" bitfld.long 0x00 11. " FRUN ,FIFO Underrun/Overrun Error" "0,1" bitfld.long 0x00 10. " HTO ,Host Timeout" "0,1" bitfld.long 0x00 9. " DRTO ,Data Read Timeout" "0,1" newline bitfld.long 0x00 8. " RTO ,Response Timeout" "0,1" bitfld.long 0x00 7. " DCRC ,Data CRC Error" "0,1" bitfld.long 0x00 6. " RCRC ,Response CRC Error" "0,1" bitfld.long 0x00 5. " RXDR ,Receive FIFO Data Request" "0,1" newline bitfld.long 0x00 4. " TXDR ,Transmit FIFO Data Request" "0,1" bitfld.long 0x00 3. " DTO ,Data Transfer Over" "0,1" bitfld.long 0x00 2. " CMDDONE ,Command Done" "0,1" bitfld.long 0x00 1. " RE ,Response Error" "0,1" newline bitfld.long 0x00 0. " CD ,Card Detect" "0,1" group.long 0x48++0x3 line.long 0x00 "MSI0_STAT,MSI0 Status Register" bitfld.long 0x00 31. " DMAREQ ,DMA Request" "0,1" bitfld.long 0x00 30. " DMAACK ,DMA Acknowledge" "0,1" hexmask.long.word 0x00 17.--29. 1. " FIFOCNT ,FIFO Count" bitfld.long 0x00 11.--16. " RSPINDX ,Response Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 10. " DMCBUSY ,Data State Machine Busy" "0,1" bitfld.long 0x00 9. " DBUSY ,Data Busy" "0,1" bitfld.long 0x00 8. " D33STAT ,Data 3 Status" "0,1" bitfld.long 0x00 4.--7. " CMDFSM ,Command FSM States" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 3. " FIFOFULL ,FIFO Full" "0,1" bitfld.long 0x00 2. " FIFOEMPTY ,FIFO Empty" "0,1" bitfld.long 0x00 1. " FIFOTXWM ,FIFO Tx Watermark" "0,1" bitfld.long 0x00 0. " FIFORXWM ,FIFO Rx Watermark" "0,1" group.long 0x4C++0x3 line.long 0x00 "MSI0_FIFOTH,MSI0 FIFO Threshold Watermark Register" bitfld.long 0x00 28.--30. " DMAMSZ ,DMA Multiple Transaction Size" "0,1,2,3,4,5,6,7" hexmask.long.word 0x00 16.--27. 1. " RXWM ,RX Watermark" hexmask.long.word 0x00 0.--11. 1. " TXWM ,TX Watermark" group.long 0x50++0x3 line.long 0x00 "MSI0_CDETECT,MSI0 Card Detect Register" bitfld.long 0x00 0. " CD0 ,Card Detect for Card 0" "0,1" group.long 0x5C++0x3 line.long 0x00 "MSI0_TCBCNT,MSI0 Transferred CIU Card Byte Count Register" group.long 0x60++0x3 line.long 0x00 "MSI0_TBBCNT,MSI0 Transferred Host to BIU-FIFO Byte Count Register" group.long 0x64++0x3 line.long 0x00 "MSI0_DEBNCE,MSI0 Debounce Count Register" hexmask.long.tbyte 0x00 0.--23. 1. " VALUE ,Debounce Count" group.long 0x80++0x3 line.long 0x00 "MSI0_BUSMODE,MSI0 Bus Mode Register" bitfld.long 0x00 8.--10. " PBL ,Programmable Burst Length" "0,1,2,3,4,5,6,7" bitfld.long 0x00 7. " DE ,IDMAC Enable" "0,1" bitfld.long 0x00 2.--6. " DSL ,Descriptor Skip Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 1. " FB ,Fixed Burst" "0,1" newline bitfld.long 0x00 0. " SWR ,Software Reset" "0,1" group.long 0x84++0x3 line.long 0x00 "MSI0_PLDMND,MSI0 Poll Demand Register" group.long 0x88++0x3 line.long 0x00 "MSI0_DBADDR,MSI0 Descriptor List Base Address Register" group.long 0x8C++0x3 line.long 0x00 "MSI0_IDSTS,MSI0 Internal DMA Status Register" bitfld.long 0x00 13.--16. " FSM ,DMAC Finite State Machine Present State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 10.--12. " EB ,Error Bits" "0,1,2,3,4,5,6,7" bitfld.long 0x00 9. " AIS ,Abnormal Interrupt Summary" "0,1" bitfld.long 0x00 8. " NIS ,Normal Interrupt Summary" "0,1" newline bitfld.long 0x00 5. " CES ,Card Error Summary" "0,1" bitfld.long 0x00 4. " DU ,Descriptor Unavailable Interrupt" "0,1" bitfld.long 0x00 2. " FBE ,Fatal Bus Error Interrupt" "0,1" bitfld.long 0x00 1. " RI ,Receive Interrupt" "0,1" newline bitfld.long 0x00 0. " TI ,Transmit Interrupt" "0,1" group.long 0x90++0x3 line.long 0x00 "MSI0_IDINTEN,MSI0 Internal DMA Interrupt Enable Register" bitfld.long 0x00 9. " AI ,Abnormal Interrupt Summary" "0,1" bitfld.long 0x00 8. " NI ,Normal Interrupt Summary" "0,1" bitfld.long 0x00 5. " CES ,Card Error Summary" "0,1" bitfld.long 0x00 4. " DU ,Descriptor Unavailable" "0,1" newline bitfld.long 0x00 2. " FBE ,Fatal Bus Error" "0,1" bitfld.long 0x00 1. " RI ,Receive Interrupt" "0,1" bitfld.long 0x00 0. " TI ,Transmit Interrupt" "0,1" group.long 0x94++0x3 line.long 0x00 "MSI0_DSCADDR,MSI0 Current Host Descriptor Address Register" group.long 0x98++0x3 line.long 0x00 "MSI0_BUFADDR,MSI0 Current Buffer Descriptor Address Register" group.long 0x100++0x3 line.long 0x00 "MSI0_CDTHRCTL,MSI0 Card Threshold Control Register" hexmask.long.word 0x00 16.--26. 1. " RDTHR ,Card Read Threshold Size" bitfld.long 0x00 1. " BSYCLRIEN ,Busy Clear Interrupt Enable" "0,1" bitfld.long 0x00 0. " RDTHREN ,Card Read Threshold Enable" "0,1" group.long 0x110++0x3 line.long 0x00 "MSI0_ENSHIFT,MSI0 Enable Phase Shift Register" bitfld.long 0x00 0.--1. " CD0 ,Enable Shift for Card 0" "0,1,2,3" tree.end endif tree "OTPC (One-Time Programmable Memory Controller)" base ad:0x31011004 width 18. group.long 0x0++0x3 line.long 0x00 "OTPC0_STAT,OTPC0 OTP Status Register" bitfld.long 0x00 13.--14. " ADDRERR ,OTP Address Error" "0,1,2,3" group.long 0x28++0x3 line.long 0x00 "OTPC0_SECU_STATE,OTPC0 OTP Security State Register" bitfld.long 0x00 0.--1. " PARTLOCK ,Part Locked" "0,1,2,3" tree.end tree "PADS (Pads Controller)" base ad:0x31004404 width 15. group.long 0x0++0x3 line.long 0x00 "PADS0_PCFG0,PADS0 Peripheral PAD Configuration0 Register" bitfld.long 0x00 17. " EMACAUXIE ,Input enable control for PTP_AUXIN pins" "0,1" bitfld.long 0x00 16. " PUTMS ,Pull-Up Enable for TMS/SWDIO (debug port)" "0,1" bitfld.long 0x00 15. " PUMSIHL ,Pull-Up Enable for MSI DATA[7:4] bits" "0,1" bitfld.long 0x00 14. " PUMSIDLC ,Pull-Up Enable for MSI DATA[3:0] bits and CMD Pin" "0,1" newline bitfld.long 0x00 10. " TWI0VSEL ,TWI0 Voltage Select" "0,1" bitfld.long 0x00 9. " TWI1VSEL ,TWI1 Voltage Select" "0,1" bitfld.long 0x00 8. " TWI2VSEL ,TWI2 Voltage Select" "0,1" bitfld.long 0x00 4. " PWMGPSEL ,PWM Global Precision Select" "0,1" newline bitfld.long 0x00 3. " EMACPHYISEL ,Select PHY Interface RGMII/RMII" "0,1" bitfld.long 0x00 2. " EMACRESET ,Reset Enable for RGMII" "0,1" bitfld.long 0x00 0.--1. " EMAC0 ,PTP Clock Source 0" "0,1,2,3" group.long 0x5C++0x3 line.long 0x00 "PADS0_DAI0_IE,PADS0 DAI0 Port Input Enable Control Register" hexmask.long.tbyte 0x00 1.--20. 1. " VALUE ,DAI0 Input Enable Control" group.long 0x60++0x3 line.long 0x00 "PADS0_DAI1_IE,PADS0 DAI1 Port Input Enable Control Register" hexmask.long.tbyte 0x00 1.--20. 1. " VALUE ,DAI1 Input Enable Control" tree.end tree "PCG (Precision Clock Generators)" base ad:0x310C9300 width 12. group.long 0x0++0x3 line.long 0x00 "PCG0_CTLA0,PCG0 Precision Clock A Control 0 Register" bitfld.long 0x00 31. " CLKEN ,Clock Enable" "0,1" bitfld.long 0x00 30. " FSEN ,Frame Sync Enable" "0,1" hexmask.long.word 0x00 20.--29. 1. " FSPHASEHI ,Phase for Frame Sync High" hexmask.long.tbyte 0x00 0.--19. 1. " FSDIV ,Frame Sync Divider" group.long 0x4++0x3 line.long 0x00 "PCG0_CTLA1,PCG0 Precision Clock A Control 1 Register" bitfld.long 0x00 31. " CLKSRC ,Clock Source" "0,1" bitfld.long 0x00 30. " FSSRC ,Frame Sync Source" "0,1" hexmask.long.word 0x00 20.--29. 1. " FSPHASELO ,Phase for Frame Sync Low" hexmask.long.tbyte 0x00 0.--19. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "PCG0_CTLB0,PCG0 Precision Clock B Control 0 Register" bitfld.long 0x00 31. " CLKEN ,Clock Enable" "0,1" bitfld.long 0x00 30. " FSEN ,Frame Sync Enable" "0,1" hexmask.long.word 0x00 20.--29. 1. " FSPHASEHI ,Phase for Frame Sync High" hexmask.long.tbyte 0x00 0.--19. 1. " FSDIV ,Frame Sync Divider" group.long 0xC++0x3 line.long 0x00 "PCG0_CTLB1,PCG0 Precision Clock B Control 1 Register" bitfld.long 0x00 31. " CLKSRC ,Clock Source" "0,1" bitfld.long 0x00 30. " FSSRC ,Frame Sync Source" "0,1" hexmask.long.word 0x00 20.--29. 1. " FSPHASELO ,Phase for Frame Sync Low" hexmask.long.tbyte 0x00 0.--19. 1. " CLKDIV ,Clock Divisor" group.long 0x10++0x3 line.long 0x00 "PCG0_PW1,PCG0 Precision Clock Pulse Width Control 1 Register" hexmask.long.word 0x00 16.--31. 1. " FSB ,Pulse Width for Frame Sync PCG B" bitfld.long 0x00 17. " INVFSB ,Active Low Frame Sync Select for Frame in Bypass PCG B" "0,1" bitfld.long 0x00 16. " STROBEB ,One Shot Frame Sync Bypass Mode PCG B" "0,1" hexmask.long.word 0x00 0.--15. 1. " FSA ,Pulse Width for Frame Sync PCG A" newline bitfld.long 0x00 1. " INVFSA ,Active Low Frame Sync Select for Frame Sync in Bypass Mode" "0,1" bitfld.long 0x00 0. " STROBEA ,One Shot Frame Sync PCG A" "0,1" group.long 0x14++0x3 line.long 0x00 "PCG0_SYNC1,PCG0 Precision Clock Frame Sync Synchronization 1 Register" bitfld.long 0x00 19. " FSBSRC ,Frame Sync B Source" "0,1" bitfld.long 0x00 18. " CLKBSRC ,Clock B Source" "0,1" bitfld.long 0x00 17. " CLKB ,Clock B Enable" "0,1" bitfld.long 0x00 16. " FSB ,Frame Sync B Enable" "0,1" newline bitfld.long 0x00 3. " FSASRC ,Frame Sync Source" "0,1" bitfld.long 0x00 2. " CLKASRC ,Clock A Source" "0,1" bitfld.long 0x00 1. " CLKA ,Clock A Enable" "0,1" bitfld.long 0x00 0. " FSA ,Frame Sync A Enable" "0,1" group.long 0x2000++0x3 line.long 0x00 "PCG0_CTLC0,PCG0 Precision Clock C Control 0 Register" bitfld.long 0x00 31. " CLKEN ,Clock Enable" "0,1" bitfld.long 0x00 30. " FSEN ,Frame Sync Enable" "0,1" hexmask.long.word 0x00 20.--29. 1. " FSPHASEHI ,Phase for Frame Sync High" hexmask.long.tbyte 0x00 0.--19. 1. " FSDIV ,Frame Sync Divider" group.long 0x2004++0x3 line.long 0x00 "PCG0_CTLC1,PCG0 Precision Clock C Control 1 Register" bitfld.long 0x00 31. " CLKSRC ,Clock Source" "0,1" bitfld.long 0x00 30. " FSSRC ,Frame Sync Source" "0,1" hexmask.long.word 0x00 20.--29. 1. " FSPHASELO ,Phase for Frame Sync Low" hexmask.long.tbyte 0x00 0.--19. 1. " CLKDIV ,Clock Divisor" group.long 0x2008++0x3 line.long 0x00 "PCG0_CTLD0,PCG0 Precision Clock D Control 0 Register" bitfld.long 0x00 31. " CLKEN ,Clock Enable" "0,1" bitfld.long 0x00 30. " FSEN ,Frame Sync Enable" "0,1" hexmask.long.word 0x00 20.--29. 1. " FSPHASEHI ,Phase for Frame Sync High" hexmask.long.tbyte 0x00 0.--19. 1. " FSDIV ,Frame Sync Divider" group.long 0x200C++0x3 line.long 0x00 "PCG0_CTLD1,PCG0 Precision Clock D Control 1 Register" bitfld.long 0x00 31. " CLKSRC ,Clock Source" "0,1" bitfld.long 0x00 30. " FSSRC ,Frame Sync Source" "0,1" hexmask.long.word 0x00 20.--29. 1. " FSPHASELO ,Phase for Frame Sync Low" hexmask.long.tbyte 0x00 0.--19. 1. " CLKDIV ,Clock Divisor" group.long 0x2010++0x3 line.long 0x00 "PCG0_PW2,PCG0 Precision Clock Pulse Width Control 2 Register" hexmask.long.word 0x00 16.--31. 1. " FSD ,Pulse Width for Frame Sync PCG D" bitfld.long 0x00 17. " INVFSD ,Active Low Frame Sync Select for Frame Sync in Bypass Mode" "0,1" bitfld.long 0x00 16. " STROBED ,One Shot Frame Sync PCG D" "0,1" hexmask.long.word 0x00 0.--15. 1. " FSC ,Pulse Width for Frame Sync PCG C" newline bitfld.long 0x00 1. " INVFSC ,Active Low Frame Sync Select for Frame Sync in Bypass Mode" "0,1" bitfld.long 0x00 0. " STROBEC ,One Shot Frame Sync PCG C" "0,1" group.long 0x2014++0x3 line.long 0x00 "PCG0_SYNC2,PCG0 Precision Clock Frame Sync Synchronization 2 Register" bitfld.long 0x00 19. " FSDSRC ,Frame Sync D Source" "0,1" bitfld.long 0x00 18. " CLKDSRC ,Clock D Source" "0,1" bitfld.long 0x00 17. " CLKD ,Clock D Enable" "0,1" bitfld.long 0x00 16. " FSD ,Frame Sync D Enable" "0,1" newline bitfld.long 0x00 3. " FSCSRC ,Frame Sync Source" "0,1" bitfld.long 0x00 2. " CLKCSRC ,Clock C Source" "0,1" bitfld.long 0x00 1. " CLKC ,Clock C Enable" "0,1" bitfld.long 0x00 0. " FSC ,Frame Sync C Enable" "0,1" tree.end sif !cpuis("ADSP-SC587")&&!cpuis("ADSP-SC587W") tree "PCIE (PCI Express)" base ad:0x310B8000 width 28. group.long 0x0++0x3 line.long 0x00 "PCIE0_EP_ID_0,PCIE0 Device ID and Vendor ID Register" hexmask.long.word 0x00 16.--31. 1. " DEVID ,Device ID" hexmask.long.word 0x00 0.--15. 1. " VENDID ,Vendor ID" group.long 0x0++0x3 line.long 0x00 "PCIE0_RC_ID_0,PCIE0 Device ID and Vendor ID Register" hexmask.long.word 0x00 16.--31. 1. " DEVID ,Device ID" hexmask.long.word 0x00 0.--15. 1. " VENDID ,Vendor ID" group.long 0x4++0x3 line.long 0x00 "PCIE0_EP_STATCMD_0,PCIE0 Command and Status Register" bitfld.long 0x00 31. " DETPERR ,Detected Parity Error" "0,1" bitfld.long 0x00 30. " SSYSERR ,Signaled System Error" "0,1" bitfld.long 0x00 29. " RXMABRT ,Received Master Abort" "0,1" bitfld.long 0x00 28. " RXTABRT ,Received Target Abort" "0,1" newline bitfld.long 0x00 27. " STABRT ,Signaled Target Abort" "0,1" bitfld.long 0x00 25.--26. " DEVSELTMG ,Device Select Timing" "0,1,2,3" bitfld.long 0x00 24. " MSTDPERR ,Master Data Parity Error" "0,1" bitfld.long 0x00 23. " FASTB2B ,Fast back-to-back transactions enable" "0,1" newline bitfld.long 0x00 21. " FAST66 ,66 MHz Capable" "0,1" bitfld.long 0x00 20. " CAPBLIST ,Capabilities List" "0,1" bitfld.long 0x00 19. " ISTAT ,Interrupt Status" "0,1" bitfld.long 0x00 10. " IEN ,Interrupt Enable" "0,1" newline bitfld.long 0x00 8. " SERREN ,Non-fatal and fatal Error reporting Enable" "0,1" bitfld.long 0x00 7. " IDSELSTEP ,IDSEL Stepping/Wait Cycle Control" "0,1" bitfld.long 0x00 6. " PERREN ,Parity Error Response" "0,1" bitfld.long 0x00 5. " VGAPS ,VGA Palette Snoop" "0,1" newline bitfld.long 0x00 4. " MWIE ,Memory Write and Invalidate Enable" "0,1" bitfld.long 0x00 3. " SCO ,Special Cycle Operation" "0,1" bitfld.long 0x00 2. " BME ,Bus Master Enable" "0,1" bitfld.long 0x00 1. " MSE ,Memory Space Enable" "0,1" newline bitfld.long 0x00 0. " IOE ,I/O Space Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "PCIE0_RC_STATCMD_0,PCIE0 Command and Status Register" bitfld.long 0x00 31. " DETPERR ,Detected Parity Error" "0,1" bitfld.long 0x00 30. " SSYSERR ,Signaled System Error" "0,1" bitfld.long 0x00 29. " RXMABRT ,Received Master Abort" "0,1" bitfld.long 0x00 28. " RXTABRT ,Received Target Abort" "0,1" newline bitfld.long 0x00 27. " STABRT ,Signaled Target Abort" "0,1" bitfld.long 0x00 25.--26. " DEVSELTMG ,Device Select Timing" "0,1,2,3" bitfld.long 0x00 24. " MSTDPERR ,Master Data Parity Error" "0,1" bitfld.long 0x00 23. " FASTB2B ,Fast back-to-back transactions enable" "0,1" newline bitfld.long 0x00 21. " FAST66 ,66 MHz Capable" "0,1" bitfld.long 0x00 20. " CAPBLIST ,Capabilities List" "0,1" bitfld.long 0x00 19. " ISTAT ,Interrupt Status" "0,1" bitfld.long 0x00 10. " IEN ,Interrupt Enable" "0,1" newline bitfld.long 0x00 8. " SERREN ,Non-fatal and fatal Error reporting Enable" "0,1" bitfld.long 0x00 7. " IDSELSTEP ,IDSEL Stepping/Wait Cycle Control" "0,1" bitfld.long 0x00 6. " PERREN ,Parity Error Response" "0,1" bitfld.long 0x00 5. " VGAPS ,VGA Palette Snoop" "0,1" newline bitfld.long 0x00 4. " MWIE ,Memory Write and Invalidate Enable" "0,1" bitfld.long 0x00 3. " SCO ,Special Cycle Operation" "0,1" bitfld.long 0x00 2. " BME ,Bus Master Enable" "0,1" bitfld.long 0x00 1. " MSE ,Memory Space Enable" "0,1" newline bitfld.long 0x00 0. " IOE ,I/O Space Enable" "0,1" group.long 0x8++0x3 line.long 0x00 "PCIE0_RC_CCRID_0,PCIE0 Class Code and Revision ID Register" hexmask.long.byte 0x00 24.--31. 1. " BCLCODE ,Base Class Code" hexmask.long.byte 0x00 16.--23. 1. " SCLSCODE ,Subclass Code" hexmask.long.byte 0x00 8.--15. 1. " PGMIF ,Program Interface" hexmask.long.byte 0x00 0.--7. 1. " REVID ,Revision Code" group.long 0x8++0x3 line.long 0x00 "PCIE0_EP_CCRID_0,PCIE0 Class Code and Revision ID Register" hexmask.long.byte 0x00 24.--31. 1. " BCLCODE ,Base Class Code" hexmask.long.byte 0x00 16.--23. 1. " SCLSCODE ,Subclass Code" hexmask.long.byte 0x00 8.--15. 1. " PGMIF ,Program Interface" hexmask.long.byte 0x00 0.--7. 1. " REVID ,Revision ID" group.long 0xC++0x3 line.long 0x00 "PCIE0_RC_CFG_0,PCIE0 Root Complex Configuration Register" bitfld.long 0x00 23. " MULTI_FUNC ,Multi-function Support" "0,1" hexmask.long.byte 0x00 16.--22. 1. " HDRTYPE ,Header Type" hexmask.long.byte 0x00 8.--15. 1. " LATMST_TMR ,Latency Master Timer" hexmask.long.byte 0x00 0.--7. 1. " LNSIZ ,Cache Line Size" group.long 0xC++0x3 line.long 0x00 "PCIE0_EP_CFG_0,PCIE0 End Point Configuration Register" bitfld.long 0x00 23. " MULTI_FUNC ,Multi-function Support" "0,1" hexmask.long.byte 0x00 16.--22. 1. " HDRTYPE ,Header Type" hexmask.long.byte 0x00 8.--15. 1. " LATMST_TMR ,Latency Master Timer" hexmask.long.byte 0x00 0.--7. 1. " LNSIZ ,Cache Line Size" group.long 0x10++0x3 line.long 0x00 "PCIE0_EP_BAR0_0,PCIE0 Endpoint Base Address Register 0" hexmask.long 0x00 4.--31. 1. " ST ,Start" bitfld.long 0x00 3. " PF ,Prefetch" "0,1" bitfld.long 0x00 1.--2. " TYPE ,Type" "0,1,2,3" bitfld.long 0x00 0. " MIO ,Memory I/O" "0,1" group.long 0x14++0x3 line.long 0x00 "PCIE0_EP_BAR1_0,PCIE0 Endpoint Base Address Register 1" hexmask.long 0x00 4.--31. 1. " ST ,Start" bitfld.long 0x00 3. " PF ,Prefetch" "0,1" bitfld.long 0x00 1.--2. " TYPE ,Type" "0,1,2,3" bitfld.long 0x00 0. " MIO ,Memory I/O" "0,1" group.long 0x18++0x3 line.long 0x00 "PCIE0_RC_TMRLAT_0,PCIE0 Latency Timer Register" hexmask.long.byte 0x00 24.--31. 1. " TMRSECLAT ,Secondary Latency Timer" hexmask.long.byte 0x00 16.--23. 1. " SUBBUS ,Subordinate Bus Number" hexmask.long.byte 0x00 8.--15. 1. " SECBUS ,Secondary Bus Number" hexmask.long.byte 0x00 0.--7. 1. " PRIMBUS ,Primary Bus Number" group.long 0x18++0x3 line.long 0x00 "PCIE0_EP_BAR2_0,PCIE0 Endpoint Base Address Register 2" hexmask.long 0x00 4.--31. 1. " ST ,Start" bitfld.long 0x00 3. " PF ,Prefetch" "0,1" bitfld.long 0x00 1.--2. " TYPE ,Type" "0,1,2,3" bitfld.long 0x00 0. " MIO ,Memory I/O" "0,1" group.long 0x1C++0x3 line.long 0x00 "PCIE0_RC_SECSTAT_0,PCIE0 Secondary Status and I/O Base and Limit Register" bitfld.long 0x00 31. " DPE ,Detected Parity Error" "0,1" bitfld.long 0x00 30. " RXSYSERR ,Received System Error" "0,1" bitfld.long 0x00 29. " RXMABRT ,Received Master Abort" "0,1" bitfld.long 0x00 28. " RXTABRT ,Received Target Abort" "0,1" newline bitfld.long 0x00 27. " STABRT ,Signaled Target Abort" "0,1" bitfld.long 0x00 24. " MDPE ,Master Data Parity Error" "0,1" bitfld.long 0x00 12.--15. " IOLMT ,I/O Limit" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8. " IODEC8 ,I/O Decode Bit 8" "0,1" newline bitfld.long 0x00 4.--7. " IOBASE ,I/O Base" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " IODEC ,I/O Decode" "0,1" group.long 0x1C++0x3 line.long 0x00 "PCIE0_EP_BAR3_0,PCIE0 Endpoint Base Address Register 3" hexmask.long 0x00 4.--31. 1. " ST ,Start" bitfld.long 0x00 3. " PF ,Prefetch" "0,1" bitfld.long 0x00 1.--2. " TYPE ,Type" "0,1,2,3" bitfld.long 0x00 0. " MIO ,Memory I/O" "0,1" group.long 0x20++0x3 line.long 0x00 "PCIE0_RC_MBL_0,PCIE0 Memory Base and Memory Limit Register" hexmask.long.word 0x00 20.--31. 1. " LMT ,Memory Limit" hexmask.long.word 0x00 4.--15. 1. " BASE ,Memory Base" group.long 0x20++0x3 line.long 0x00 "PCIE0_EP_BAR4_0,PCIE0 Endpoint Base Address Register 4" hexmask.long 0x00 4.--31. 1. " ST ,Start" bitfld.long 0x00 3. " PF ,Prefetch" "0,1" bitfld.long 0x00 1.--2. " TYPE ,Type" "0,1,2,3" bitfld.long 0x00 0. " MIO ,Memory I/O" "0,1" group.long 0x24++0x3 line.long 0x00 "PCIE0_EP_BAR5_0,PCIE0 End Point Base Address Register 5" hexmask.long 0x00 4.--31. 1. " ST ,Start" bitfld.long 0x00 3. " PF ,Prefetch" "0,1" bitfld.long 0x00 1.--2. " TYPE ,Type" "0,1,2,3" bitfld.long 0x00 0. " MIO ,Memory I/O" "0,1" group.long 0x24++0x3 line.long 0x00 "PCIE0_RC_PREFMBL_0,PCIE0 Prefetchable Memory Base and Limit Register" hexmask.long.word 0x00 20.--31. 1. " LMT ,Memory Limit" bitfld.long 0x00 16. " LMTDEC ,Prefetchable Memory Limit Decode" "0,1" hexmask.long.word 0x00 4.--15. 1. " BASE ,Prefetchable Memory Base" bitfld.long 0x00 0. " DEC ,Prefetchable Memory decode" "0,1" group.long 0x28++0x3 line.long 0x00 "PCIE0_EP_CRDBPTR_0,PCIE0 CardBus CIS Pointer Register" group.long 0x28++0x3 line.long 0x00 "PCIE0_RC_PREF_BUPP_0,PCIE0 Prefetchable Base Upper 32 Bits Register" group.long 0x2C++0x3 line.long 0x00 "PCIE0_EP_SSVID_0,PCIE0 Subsystem ID and Subsystem Vendor ID Register" hexmask.long.word 0x00 16.--31. 1. " DEVID ,Endpoint Device ID" hexmask.long.word 0x00 0.--15. 1. " VENDID ,Endpoint Subsystem Vendor ID" group.long 0x2C++0x3 line.long 0x00 "PCIE0_RC_PREF_LMT_UP_0,PCIE0 Prefetchable Limit Upper 32 Bits Register" group.long 0x30++0x3 line.long 0x00 "PCIE0_EP_ROMCFG_0,PCIE0 End Point Expansion ROM Base Address Register" hexmask.long.tbyte 0x00 11.--31. 1. " BASE ,Expansion ROM Base Address" bitfld.long 0x00 0. " EN ,Expansion ROM BAR Enable" "0,1" group.long 0x30++0x3 line.long 0x00 "PCIE0_RC_IOBL_0,PCIE0 Root Complex I/O Base and Limit Upper 16 bits Register" hexmask.long.word 0x00 16.--31. 1. " LMT ,Limit Upper Address" hexmask.long.word 0x00 0.--15. 1. " BASE ,Base Upper Address" group.long 0x34++0x3 line.long 0x00 "PCIE0_EP_CAPBPTR_0,PCIE0 Capability Pointer Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Capabilities Pointer" group.long 0x34++0x3 line.long 0x00 "PCIE0_RC_CAPBPTR_0,PCIE0 Capability Pointer Register." hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Capabilities Pointer" group.long 0x38++0x3 line.long 0x00 "PCIE0_RC_ROMCFG_0,PCIE0 Root Complex Expansion ROM Base Address Register" hexmask.long.tbyte 0x00 11.--31. 1. " BASE ,Expansion ROM Base Address" bitfld.long 0x00 0. " EN ,Expansion ROM Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "PCIE0_RC_BRDG_ILPCTL_0,PCIE0 Interrupt Bridge Line and Pin Control Register" bitfld.long 0x00 22. " SBR ,Secondary Bus Reset" "0,1" bitfld.long 0x00 21. " MSTABT ,Mstr Abort Mode" "0,1" bitfld.long 0x00 20. " V16_D ,VGA 16-bit Decode" "0,1" bitfld.long 0x00 19. " VGAEN ,VGA Enable" "0,1" newline bitfld.long 0x00 18. " ISAEN ,Isa Enable" "0,1" bitfld.long 0x00 17. " SERREN ,Serr Enable" "0,1" bitfld.long 0x00 16. " PERE ,Parity Error Response" "0,1" hexmask.long.byte 0x00 8.--15. 1. " PIN ,Interrupt Pin" newline hexmask.long.byte 0x00 0.--7. 1. " LN ,Interrupt Line" group.long 0x3C++0x3 line.long 0x00 "PCIE0_EP_PINLN_INT_0,PCIE0 Interrupt Line and Pin Register" hexmask.long.byte 0x00 8.--15. 1. " PIN ,Interrupt Pin" hexmask.long.byte 0x00 0.--7. 1. " LN ,Interrupt Line" group.long 0x40++0x3 line.long 0x00 "PCIE0_PMT_CAPB_0,PCIE0 Power Management Capabilities Register" bitfld.long 0x00 27.--31. " PME ,PME Support" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 26. " D2 ,D2 device state support" "0,1" bitfld.long 0x00 25. " D1 ,D1 device state support" "0,1" bitfld.long 0x00 22.--24. " AUXCUR ,Auxiliary Current" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 21. " DSI ,Device Specific Initialization" "0,1" bitfld.long 0x00 19. " PMECLK ,PME Clock" "0,1" bitfld.long 0x00 16.--18. " SPECVER ,Spec Version" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 8.--15. 1. " VAL ,Next Capability Pointer" newline hexmask.long.byte 0x00 0.--7. 1. " CAPBID ,Capabilities ID" group.long 0x44++0x3 line.long 0x00 "PCIE0_PMT_CTLSTAT_0,PCIE0 Power Management Control and Status Register" hexmask.long.byte 0x00 24.--31. 1. " DATADDRINFO ,Data Reg Add Info" bitfld.long 0x00 23. " BPCLKEN ,Bus Power/Clock Control Enable" "0,1" bitfld.long 0x00 22. " B2B3 ,B2 B3 Support" "0,1" bitfld.long 0x00 15. " PMESTAT ,Pme Status" "0,1" newline bitfld.long 0x00 13.--14. " DATSCL ,Data Scale" "0,1,2,3" bitfld.long 0x00 9.--12. " DATSEL ,Data Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8. " PMEEN ,Enables the function to assert PME" "0,1" bitfld.long 0x00 3. " NOSFTRST ,No Soft Reset" "0,1" newline bitfld.long 0x00 0.--1. " PWRSTATE ,Get and Set power state of a function to new value" "0,1,2,3" group.long 0x50++0x3 line.long 0x00 "PCIE0_MSI_CAPB_NPTR_0,PCIE0 MSI Capability ID, Next Pointer and Control Register" bitfld.long 0x00 24. " PVM ,Per-vector Masking Capable" "0,1" bitfld.long 0x00 23. " ADDR64 ,64-bit Address Capability" "0,1" bitfld.long 0x00 20.--22. " MULTMSG_EN ,MSI Multiple Message Enable" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17.--19. " MULTMSG_CAPB ,Multiple Messages Capability" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 16. " EN ,MSI Enable" "0,1" hexmask.long.byte 0x00 8.--15. 1. " OFFSET ,Next Offset" hexmask.long.byte 0x00 0.--7. 1. " ID ,MSI Capability ID" group.long 0x54++0x3 line.long 0x00 "PCIE0_MSI_CAPB_OFF4_0,PCIE0 MSI Capability Offset Register" hexmask.long 0x00 2.--31. 1. " VALUE ,MSI Offset" group.long 0x58++0x3 line.long 0x00 "PCIE0_MSI_CAPB_OFF8_0,PCIE0 MSI Capability Offset Register" group.long 0x64++0x3 line.long 0x00 "PCIE0_MSI_CAPB_OFFC_0,PCIE0 MSI Capability Offset Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,MSI Offset" group.long 0x70++0x3 line.long 0x00 "PCIE0_CAPB_NPTR_0,PCIE0 PCIe Capabilities, ID, Next Pointer Register" bitfld.long 0x00 25.--29. " MSGNUM ,Interrupt Message Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 24. " SLOT ,Slot Implemented" "0,1" bitfld.long 0x00 20.--23. " DPTYPE ,PCIe Device Port Type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " REG ,Capabilities Register" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 8.--15. 1. " NXTPTR ,Next Capability Pointer" hexmask.long.byte 0x00 0.--7. 1. " ID ,Capabilities ID" group.long 0x74++0x3 line.long 0x00 "PCIE0_RC_DEVCAPB_0,PCIE0 Device Capabilities Register" bitfld.long 0x00 15. " RBERR ,Role-Based Error Reporting" "0,1" bitfld.long 0x00 5. " ETF ,Extended Tag Field Supported" "0,1" bitfld.long 0x00 3.--4. " PF ,Phantom Functions Supported" "0,1,2,3" bitfld.long 0x00 0.--2. " MAXPLSZ ,Maximum Payload Size Supported" "0,1,2,3,4,5,6,7" group.long 0x74++0x3 line.long 0x00 "PCIE0_EP_DEVCAPB_0,PCIE0 Device Capabilities Register" bitfld.long 0x00 28. " FLR ,Function Level Reset Capability" "0,1" bitfld.long 0x00 15. " RBERR ,Role-Based Error Reporting" "0,1" bitfld.long 0x00 9.--11. " L1SLAT ,Endpoint L1 Acceptable Latency" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6.--8. " L0SLAT ,Endpoint L0s Acceptable Latency" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 5. " ETF ,Extended Tag Field Supported" "0,1" bitfld.long 0x00 3.--4. " PF ,Phantom Functions Supported" "0,1,2,3" bitfld.long 0x00 0.--2. " MAXPLSZ ,Maximum Payload Size Supported" "0,1,2,3,4,5,6,7" group.long 0x78++0x3 line.long 0x00 "PCIE0_DEV_CTLSTAT_0,PCIE0 Device Control and Status Register" bitfld.long 0x00 21. " TPND ,Transactions Pending" "0,1" bitfld.long 0x00 20. " AUXPWRDET ,AUX Power Detected" "0,1" bitfld.long 0x00 19. " UREQDET ,Unsupported Request Detected" "0,1" bitfld.long 0x00 18. " FERR_DET ,Fatal Error Detected" "0,1" newline bitfld.long 0x00 17. " NFERRDET ,Non-Fatal Error Detected" "0,1" bitfld.long 0x00 16. " CERRDET ,Correctable Error Detected" "0,1" bitfld.long 0x00 15. " INITFLR ,Bridge Configuration Retry Enable" "0,1" bitfld.long 0x00 12.--14. " MAXRRS ,Max Read Request Size" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. " NOSNOOPEN ,Enable No Snoop" "0,1" bitfld.long 0x00 10. " AUXPWREN ,Aux Power Management Enable" "0,1" bitfld.long 0x00 9. " PFUNC_EN ,Phantom Functions Enable" "0,1" bitfld.long 0x00 8. " ETFEN ,Extended Tag Field Enable" "0,1" newline bitfld.long 0x00 5.--7. " MAXPLSZ ,Maximum Payload Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4. " RLXORDEN ,Enable Relaxed Ordering" "0,1" bitfld.long 0x00 3. " UREQEN ,Unsupported Request Reporting Enable" "0,1" bitfld.long 0x00 2. " FERR_EN ,Fatal Error Reporting Enable" "0,1" newline bitfld.long 0x00 1. " NFERREN ,Non-Fatal Error Reporting Enable" "0,1" bitfld.long 0x00 0. " CERREN ,Correctable Error Reporting Enable" "0,1" group.long 0x7C++0x3 line.long 0x00 "PCIE0_LNK_CAPB_0,PCIE0 Link Capabilities Register" hexmask.long.byte 0x00 24.--31. 1. " PRT_NUM ,Port Number" bitfld.long 0x00 22. " ASPM ,ASPM Optionality Compliance" "0,1" bitfld.long 0x00 21. " LNKBW ,Link Bandwidth Notification Capability" "0,1" bitfld.long 0x00 20. " DLLAR ,Data Link Layer Link Active Reporting Capable" "0,1" newline bitfld.long 0x00 19. " SURPDERR ,Surprise Down Error Reporting Capable" "0,1" bitfld.long 0x00 18. " CLKPMT ,Clock Power Management" "0,1" bitfld.long 0x00 15.--17. " L1ELAT ,L1 Exit Latency" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--14. " L0SELAT ,L0s Exit Latency" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 10.--11. " ASPMT ,Active State Power Management (ASPM) Support" "0,1,2,3" bitfld.long 0x00 4.--9. " MLW ,Maximum Link Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--3. " MLS ,Maximum Link Speed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x3 line.long 0x00 "PCIE0_LNK_CTLSTAT_0,PCIE0 Link Control and Status Register" bitfld.long 0x00 31. " ABW ,Link Autonomous Bandwidth Status" "0,1" bitfld.long 0x00 30. " BWM ,Link Bandwidth Management Status" "0,1" bitfld.long 0x00 29. " DLNKACT ,Data Link Layer Link Active" "0,1" bitfld.long 0x00 28. " SLTCLKCFG ,Slot Clock Configuration" "0,1" newline bitfld.long 0x00 27. " TRAIN ,Link Training" "0,1" bitfld.long 0x00 20.--24. " NEGOWID ,Negotiated Link Width" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--19. " SPD ,Current Link Speed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 11. " AWIDDIS ,Hardware Autonomous Width Disable" "0,1" newline bitfld.long 0x00 10. " BWMIEN ,Link Bandwidth Management Interrupt Enable" "0,1" bitfld.long 0x00 8. " CLKPMTEN ,Enable Clock Power Management" "0,1" bitfld.long 0x00 7. " EXT_SYNC ,Extended Synchronization" "0,1" bitfld.long 0x00 6. " COMCLKCFG ,Common Clock Configuration" "0,1" newline bitfld.long 0x00 5. " RETRAIN ,Retrain Link" "0,1" bitfld.long 0x00 4. " DIS ,Link Disable" "0,1" bitfld.long 0x00 3. " RCB ,Read Completion Boundary" "0,1" bitfld.long 0x00 0.--1. " ASPM ,Active State Power Management (ASPM) Control" "0,1,2,3" group.long 0x8C++0x3 line.long 0x00 "PCIE0_RC_CTLCAPB_0,PCIE0 Root Control and Capabilities Register" bitfld.long 0x00 16. " CRSSWV ,Configuration Request Retry Status Software Visibility" "0,1" bitfld.long 0x00 4. " CRSSWVEN ,Configuration Request Retry Status Visibility Enable" "0,1" bitfld.long 0x00 3. " PMTIEN ,PME Interrupt Enable" "0,1" bitfld.long 0x00 2. " SERRFERREN ,System Error On Fatal Error Enable" "0,1" newline bitfld.long 0x00 1. " SERRNFERREN ,System Error On Non Fatal Error Enable" "0,1" bitfld.long 0x00 0. " SERRCERREN ,System Error On Correctable Error Enable" "0,1" group.long 0x90++0x3 line.long 0x00 "PCIE0_RC_STAT_0,PCIE0 Root Status Register" bitfld.long 0x00 17. " PMEPND ,PCIE Cap Pme Pending" "0,1" bitfld.long 0x00 16. " PME ,PCIE Cap Pme Status" "0,1" hexmask.long.word 0x00 0.--15. 1. " PRID ,PCIE Cap Pme Req Id" group.long 0x94++0x3 line.long 0x00 "PCIE0_DEV_CAPB2_0,PCIE0 Device Capabilities 2 Register" bitfld.long 0x00 18.--19. " OBFF ,Cap OBFF Support" "0,1,2,3" bitfld.long 0x00 13. " TC1 ,TLP Processing Hints Complete Support 1" "0,1" bitfld.long 0x00 12. " TC0 ,TLP Processing Hints Complete Support 0" "0,1" bitfld.long 0x00 11. " LTR ,Latency Tolerance Reporting" "0,1" newline bitfld.long 0x00 10. " NRENP2P ,No Routing Element peer-to-peer" "0,1" bitfld.long 0x00 9. " CAS128 ,Compare and Swap 128 Support" "0,1" bitfld.long 0x00 8. " CPL64A ,CPL 64 Atomic Support" "0,1" bitfld.long 0x00 7. " CPL32A ,CPL 32 Atomic Support" "0,1" newline bitfld.long 0x00 6. " AR ,Atomic Routing Support" "0,1" bitfld.long 0x00 5. " AF ,Alternative Routing ID Forward Support" "0,1" bitfld.long 0x00 4. " CTD ,CPL Timeout Disable Support" "0,1" bitfld.long 0x00 0.--3. " CTR ,CPL Timeout Range" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x98++0x3 line.long 0x00 "PCIE0_DEV_CTLSTAT2_0,PCIE0 Device Control 2 and Status 2 Register" bitfld.long 0x00 5. " ARIFWD ,ARI Forward Support" "0,1" bitfld.long 0x00 4. " CPLTMODIS ,Completion Timeout Disable" "0,1" group.long 0x9C++0x3 line.long 0x00 "PCIE0_LNK_CAPB2_0,PCIE0 Link Capabilities 2 Register" bitfld.long 0x00 8. " CRSLNK ,Cross Link Support" "0,1" hexmask.long.byte 0x00 1.--7. 1. " LNKSPDVECT ,Link Speed Vector Support" group.long 0xA0++0x3 line.long 0x00 "PCIE0_LNK_CTLSTAT2_0,PCIE0 Link Control 2 and Status 2 Register" bitfld.long 0x00 21. " EQREQ ,Link Equalization Request" "0,1" bitfld.long 0x00 20. " EQP3DONE ,Equalization Phase 3 Successful" "0,1" bitfld.long 0x00 19. " EQP2DONE ,Equalization Phase 2 Successful" "0,1" bitfld.long 0x00 18. " EQP1DONE ,Equalization Phase 1 Successful" "0,1" newline bitfld.long 0x00 17. " EQDONE ,Equalization Complete" "0,1" bitfld.long 0x00 16. " CURDEMPH ,Current De-emphasis level" "0,1" bitfld.long 0x00 12.--15. " PRSTCMPLI ,Compliance Preset/De-emphasis" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 11. " SOSCMPLI ,Compliance SOS" "0,1" newline bitfld.long 0x00 10. " EMCMPLI ,Enter Modified Compliance" "0,1" bitfld.long 0x00 7.--9. " TXM ,Transmit Margin" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6. " SELDEMPH ,Selectable De-emphasis" "0,1" bitfld.long 0x00 5. " HWASDIS ,Hardware Autonomous Speed Disable" "0,1" newline bitfld.long 0x00 4. " ECMPLI ,Enter Compliance" "0,1" bitfld.long 0x00 0.--3. " TRGSPD ,Target Link Speed" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x100++0x3 line.long 0x00 "PCIE0_ADVERR_EXTCAPB_0,PCIE0 Advanced Error Reporting Extended Capability Header Register" hexmask.long.word 0x00 20.--31. 1. " NXTOFF ,Next Capability Offset" bitfld.long 0x00 16.--19. " VER ,Capability Version" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 0.--15. 1. " ID ,PCI Express Extended Capability ID" group.long 0x104++0x3 line.long 0x00 "PCIE0_UNCOR_ERRSTAT_0,PCIE0 Uncorrectable Error Status Register" bitfld.long 0x00 25. " TLPPRFXBLK ,TLP Prefix Blocked Error Severity Status" "0,1" bitfld.long 0x00 24. " ATOMEGBLK ,Atomic Egress Blocked Error Status" "0,1" bitfld.long 0x00 22. " UIER ,Uncorrectable Internal Error Severity Status" "0,1" bitfld.long 0x00 20. " UNSUPREQ ,Unsupported Request Error Severity Status" "0,1" newline bitfld.long 0x00 19. " ECRC ,ECRC Error Severity Status" "0,1" bitfld.long 0x00 18. " MALFTLP ,Malformed TLP Severity Status" "0,1" bitfld.long 0x00 17. " RXOVR ,Receiver Overflow Error Severity Status" "0,1" bitfld.long 0x00 16. " UNXPCMPL ,Unexpected Completion Error Severity Status" "0,1" newline bitfld.long 0x00 15. " CMPLABRT ,Completer Abort Error Severity Status" "0,1" bitfld.long 0x00 14. " CMPLTMO ,Cmplt Timeout Err Status" "0,1" bitfld.long 0x00 13. " FCPROTO ,Flow Control Protocol Error Status" "0,1" bitfld.long 0x00 12. " TLPPOIS ,Poisoned TLP Severity Status" "0,1" newline bitfld.long 0x00 5. " SURPDN ,Surprise Down Error Status" "0,1" bitfld.long 0x00 4. " DLPROTO ,Data Link Protocol Error Status" "0,1" group.long 0x108++0x3 line.long 0x00 "PCIE0_UNCOR_ERRMSK_0,PCIE0 Uncorrectable Error Mask Register" bitfld.long 0x00 25. " TLPPRFXBLK ,TLP Prefix Blocked Error Mask" "0,1" bitfld.long 0x00 24. " ATOMEGBLK ,Atomic Operation Egress Blocked Mask" "0,1" bitfld.long 0x00 22. " UIER ,Uncorrectable Internal Error Mask" "0,1" bitfld.long 0x00 20. " UNSUPREQ ,Unsupported Request Error Mask" "0,1" newline bitfld.long 0x00 19. " ECRC ,ECRC Error Mask" "0,1" bitfld.long 0x00 18. " MALFTLP ,Malformed TLP Mask" "0,1" bitfld.long 0x00 17. " RXOVR ,Receiver Overflow Mask" "0,1" bitfld.long 0x00 16. " UNXPCMPL ,Unexpected Completion Mask" "0,1" newline bitfld.long 0x00 15. " CMPLABRT ,Completer Abort Mask" "0,1" bitfld.long 0x00 14. " CMPLTMO ,Completion Timeout Mask" "0,1" bitfld.long 0x00 13. " FCPROTO ,Flow Control Protocol Error Mask" "0,1" bitfld.long 0x00 12. " TLPPOIS ,Poisoned TLP Mask" "0,1" newline bitfld.long 0x00 5. " SURPDN ,Surprise Down Error Mask" "0,1" bitfld.long 0x00 4. " DLPROTO ,Data Link Protocol Error Mask" "0,1" group.long 0x10C++0x3 line.long 0x00 "PCIE0_UNCOR_ERRSEV_0,PCIE0 Uncorrectable Error Severity Register" bitfld.long 0x00 25. " TLPPRFXBLK ,TLP Prefix Blocked Error Severity" "0,1" bitfld.long 0x00 24. " ATOMEGBLK ,Atomic Operation Egress Blocked Severity" "0,1" bitfld.long 0x00 22. " UIER ,Uncorrectable Internal Error Severity" "0,1" bitfld.long 0x00 20. " UNSUPREQ ,Unsupported Request Error Severity" "0,1" newline bitfld.long 0x00 19. " ECRC ,ECRC Error Severity" "0,1" bitfld.long 0x00 18. " MALFTLP ,Malformed TLP Severity" "0,1" bitfld.long 0x00 17. " RXOVR ,Receiver Overflow Error Severity" "0,1" bitfld.long 0x00 16. " UNXPCMPL ,Unexpected Completion Error Severity" "0,1" newline bitfld.long 0x00 15. " CMPLABRT ,Completer Abort Error Severity" "0,1" bitfld.long 0x00 14. " CMPLTMO ,Completion Timeout Error Severity" "0,1" bitfld.long 0x00 13. " FCPROTO ,Flow Control Protocol Error Severity" "0,1" bitfld.long 0x00 12. " TLPPOIS ,Poisoned TLP Severity" "0,1" newline bitfld.long 0x00 5. " SURPDN ,Surprise Down Error Severity" "0,1" bitfld.long 0x00 4. " DLPROTO ,Data Link Protocol Error Severity" "0,1" group.long 0x110++0x3 line.long 0x00 "PCIE0_CORERR_STAT_0,PCIE0 Correctable Error Status Register" bitfld.long 0x00 14. " CORINTL ,Corrected Internal Error Status" "0,1" bitfld.long 0x00 13. " ADVNF ,Advisory Non Fatal Error Status" "0,1" bitfld.long 0x00 12. " RPLYTMO ,Replay Timer Timeout Status" "0,1" bitfld.long 0x00 8. " RPLYNOROLL ,Replay No Rollover Status" "0,1" newline bitfld.long 0x00 7. " BADDLLP ,Bad DLLP Status" "0,1" bitfld.long 0x00 6. " BADTLP ,Bad TLP Status" "0,1" bitfld.long 0x00 0. " RXERR ,Receiver Error Status" "0,1" group.long 0x114++0x3 line.long 0x00 "PCIE0_CORERR_MSK_0,PCIE0 Correctable Error Mask Register" bitfld.long 0x00 14. " CORINTL ,Corrected Internal Error Mask" "0,1" bitfld.long 0x00 13. " ADVNF ,Advisory Non-Fatal Error Mask" "0,1" bitfld.long 0x00 12. " RPLYTMO ,Replay Timer Timeout Mask" "0,1" bitfld.long 0x00 8. " RPLYNOROLL ,Replay No Rollover" "0,1" newline bitfld.long 0x00 7. " BADDLLP ,Bad DLLP Mask" "0,1" bitfld.long 0x00 6. " BADTLP ,Bad TLP Mask" "0,1" bitfld.long 0x00 0. " RXERR ,Receiver Error Mask" "0,1" group.long 0x118++0x3 line.long 0x00 "PCIE0_ADVERR_CAPBCTL_0,PCIE0 Advanced Error Capabilities and Control Register" bitfld.long 0x00 8. " CHKEN ,ECRC Check Enable" "0,1" bitfld.long 0x00 7. " CHKCAPB ,Ecrc Check Capability" "0,1" bitfld.long 0x00 6. " GENEN ,ECRC Generation Enable" "0,1" bitfld.long 0x00 5. " GENCAPB ,Ecrc Gen Capability" "0,1" newline bitfld.long 0x00 0.--4. " FEPTR ,First Error Pointer" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x11C++0x3 line.long 0x00 "PCIE0_HDRLOG0_0,PCIE0 Header Log Register 0" group.long 0x120++0x3 line.long 0x00 "PCIE0_HDRLOG1_0,PCIE0 Header Log Register 1" group.long 0x124++0x3 line.long 0x00 "PCIE0_HDRLOG2_0,PCIE0 Header Log Register 2" group.long 0x128++0x3 line.long 0x00 "PCIE0_HDRLOG3_0,PCIE0 Header Log Register 3" group.long 0x12C++0x3 line.long 0x00 "PCIE0_RC_ERRCMD_0,PCIE0 Root Complex Error Command Register" bitfld.long 0x00 2. " F_ERR_REP_EN ,Fatal Error Reporting Enable" "0,1" bitfld.long 0x00 1. " NFREPEN ,Non Fatal Error Reporting Enable" "0,1" bitfld.long 0x00 0. " CRPTEN ,Correctable Error Reporting Enable" "0,1" group.long 0x130++0x3 line.long 0x00 "PCIE0_RC_ERRSTAT_0,PCIE0 Root Error Status Register" bitfld.long 0x00 27.--31. " ADVMSGNUM ,Advanced Error Interrupt Message Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6. " F_ERR_MSG_RX ,Fatal Error Messages Received" "0,1" bitfld.long 0x00 5. " NFMSGRX ,One or more Non-Fatal Uncorrectable Error Messages Received" "0,1" bitfld.long 0x00 4. " F_UC_F_RX ,First Uncorrectable Fatal Message Received" "0,1" newline bitfld.long 0x00 3. " MFNFMSGRX ,Multiple Fatal/Non Fatal Error Messages Received" "0,1" bitfld.long 0x00 2. " FNFMSGRX ,Fatal/Non Fatal Error Received" "0,1" bitfld.long 0x00 1. " MCORMSGRX ,Multiple Correctable Error Messages Received" "0,1" bitfld.long 0x00 0. " CORMSGRX ,Correctable Error Message Received" "0,1" group.long 0x134++0x3 line.long 0x00 "PCIE0_ERRSRC_ID_0,PCIE0 Error Source Identification Register" hexmask.long.word 0x00 16.--31. 1. " F_NF ,Fatal/Non-Fatal Error Source Identification" hexmask.long.word 0x00 0.--15. 1. " COR ,Correctable Error Source Identification" group.long 0x700++0x3 line.long 0x00 "PCIE0_ACK_TMR_0,PCIE0 Acknowledge Latency Timer and Replay Timer Register" hexmask.long.word 0x00 16.--31. 1. " RPLYLMT ,Replay Timer Limit" hexmask.long.word 0x00 0.--15. 1. " LATLMT ,Ack Latency Timer Limit" group.long 0x704++0x3 line.long 0x00 "PCIE0_VEND_DLLP_0,PCIE0 Vendor Specific DLLP Register" group.long 0x708++0x3 line.long 0x00 "PCIE0_PL_FRC_0,PCIE0 Port Force Link Register" hexmask.long.byte 0x00 24.--31. 1. " CPLSENTCNT ,Low Power Entrance Count" bitfld.long 0x00 16.--21. " LNKSTATE ,Forced LTSSM State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. " FRCEN ,Force Link Enable" "0,1" bitfld.long 0x00 8.--11. " FRCLTSSM ,Forced Link Command" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline hexmask.long.byte 0x00 0.--7. 1. " LNKNUM ,Link Number" group.long 0x70C++0x3 line.long 0x00 "PCIE0_ACK_ASPMCTL_0,PCIE0 Acknowledge Frequency and L0-L1 ASPM Control Register" bitfld.long 0x00 30. " ENTER ,Enter ASPM" "0,1" bitfld.long 0x00 27.--29. " L1ENTLAT ,L1 Entrance Latency" "0,1,2,3,4,5,6,7" bitfld.long 0x00 24.--26. " L0SENTLAT ,L0s Entrance Latency" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 16.--23. 1. " COMCLKNFTS ,Common Clock N_FTS" newline hexmask.long.byte 0x00 8.--15. 1. " NFTS ,Number of Fast Training Sequence" hexmask.long.byte 0x00 0.--7. 1. " FREQ ,Frequency" group.long 0x710++0x3 line.long 0x00 "PCIE0_PLCTL_0,PCIE0 Port Logic Link Control Register" bitfld.long 0x00 16.--21. " LCAPB ,Link Mode Enable" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 7. " FLM ,Fast Link Mode" "0,1" bitfld.long 0x00 5. " DLEN ,DLL Link Enable" "0,1" bitfld.long 0x00 3. " RSTA ,Reset Assert" "0,1" newline bitfld.long 0x00 2. " LPBKEN ,Loopback Enable" "0,1" bitfld.long 0x00 1. " SDIS ,Scramble Disable" "0,1" bitfld.long 0x00 0. " VDLLP ,Vendor Specific DLLP Request" "0,1" group.long 0x714++0x3 line.long 0x00 "PCIE0_LANE_SKEW_0,PCIE0 Lane Skew Register" bitfld.long 0x00 31. " LLDIS ,Disable Lane-to-Lane De-skew" "0,1" bitfld.long 0x00 25. " ANDIS ,Ack/Nak Disable" "0,1" bitfld.long 0x00 24. " FCDIS ,Flow Control Disable" "0,1" hexmask.long.tbyte 0x00 0.--23. 1. " ISKW ,Inset Lane Deskew" group.long 0x718++0x3 line.long 0x00 "PCIE0_TMRCTL_MFN_0,PCIE0 Timer Control and Max Function Number Register" bitfld.long 0x00 19.--23. " ACKMOD ,Acknowledge Latency Timer Modifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 14.--18. " RLMT ,Replay Timer Limit Modifier" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" hexmask.long.byte 0x00 0.--7. 1. " MFN ,Maximum Function Number" group.long 0x71C++0x3 line.long 0x00 "PCIE0_SYM_TMRFILT1_0,PCIE0 Symbol Timer Filter 1 Off" hexmask.long.word 0x00 16.--31. 1. " MSKRADM1 ,Mask1 RADM Filtering and Error Handling Rules" bitfld.long 0x00 15. " FCWDTDIS ,Disable FC Watchdog Timer" "0,1" hexmask.long.word 0x00 0.--10. 1. " SKPINTVAL ,SKP Interval Value" group.long 0x720++0x3 line.long 0x00 "PCIE0_FILTMSK2_0,PCIE0 Filter Mask 2 Register" group.long 0x724++0x3 line.long 0x00 "PCIE0_BUS_MULOB_DECOMP_0,PCIE0 Bus Multiple Outbound Decomposition SubReq Control Register" bitfld.long 0x00 0.--1. " SPLTBRST ,Enable Bus Multiple Outbound Decomposed NP SubRequests" "0,1,2,3" group.long 0x728++0x3 line.long 0x00 "PCIE0_PLDBG0_0,PCIE0 Port Logic Debug0 Register" bitfld.long 0x00 28.--31. " LNKCTLBTS ,Link control bits advertised by link partner" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 27. " PADLANNMBR ,Currently receiving k237 (PAD) in place of lane number" "0,1" bitfld.long 0x00 26. " PADLNKNMBR ,Currently receiving k237 (PAD) in place of link number" "0,1" bitfld.long 0x00 25. " RCVLGIDL ,Receiver is receiving Logical Idle" "0,1" newline hexmask.long.word 0x00 8.--23. 1. " PIPETRD ,PIPE Transmit Data" bitfld.long 0x00 6.--7. " PIPETRK ,PIPE Transmit K Indication" "0,1,2,3" bitfld.long 0x00 0.--5. " LTSSM ,Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x72C++0x3 line.long 0x00 "PCIE0_PLDBG1_0,PCIE0 Port Logic Debug1 Register" bitfld.long 0x00 31. " SCRDIS ,Scrambling disabled for the link" "0,1" bitfld.long 0x00 30. " LTSSMDIS ,LTSSM in DISABLE state. Link inoperable" "0,1" bitfld.long 0x00 29. " LTSSMLNKTRNG ,LTSSM performing link training" "0,1" bitfld.long 0x00 28. " LTSSMLNRVRSL ,LTSSM testing for polarity reversal" "0,1" newline bitfld.long 0x00 27. " LTSSMLNKRST ,LTSSM-negotiated link reset" "0,1" bitfld.long 0x00 22. " PIPERCDTLPBRQ ,PIPE receiver detect/loopback request" "0,1" bitfld.long 0x00 21. " PIPETREIRQ ,PIPE transmit electrical idle request" "0,1" bitfld.long 0x00 20. " PIPETRCMPRQ ,PIPE transmit compliance request" "0,1" newline bitfld.long 0x00 19. " TRRSTRQ ,Application request to initiate training reset" "0,1" hexmask.long.byte 0x00 8.--15. 1. " LNKNUM ,Link number advertised/confirmed by link partner" bitfld.long 0x00 5. " TRSKP ,A skip ordered set has been transmitted" "0,1" bitfld.long 0x00 4. " LINKUP ,LTSSM reports PHY link up" "0,1" newline bitfld.long 0x00 3. " RCVSKP ,Receiver reports skip reception" "0,1" bitfld.long 0x00 2. " TS1RCVD ,TS1 training sequence received (pulse)" "0,1" bitfld.long 0x00 1. " TS2RCVD ,TS2 training sequence received (pulse)" "0,1" bitfld.long 0x00 0. " RCVLNRV ,Receiver detected lane reversal" "0,1" group.long 0x730++0x3 line.long 0x00 "PCIE0_TX_PST_FCCSTAT_0,PCIE0 Transmit Posted FC Credit Status Register" hexmask.long.byte 0x00 12.--19. 1. " PHFC ,Transmit Posted Header FC Credits" hexmask.long.word 0x00 0.--11. 1. " PDFC ,Transmit Posted Data FC Credits" group.long 0x734++0x3 line.long 0x00 "PCIE0_TX_NPST_FCCSTAT_0,PCIE0 Transmit Non-Posted FC Credit Status Register" hexmask.long.byte 0x00 12.--19. 1. " NPHFC ,Transmit Non-Posted Header FC Credits" hexmask.long.word 0x00 0.--11. 1. " NPDFC ,Transmit Non-Posted Data FC Credits" group.long 0x738++0x3 line.long 0x00 "PCIE0_TXCOMP_FCCSTAT_0,PCIE0 Transmit Completion FC Credit Status Register" hexmask.long.byte 0x00 12.--19. 1. " CPLHFC ,Transmit Completion Header FC Credits" hexmask.long.word 0x00 0.--11. 1. " CPLDFC ,Transmit Completion Data FC Credits" group.long 0x73C++0x3 line.long 0x00 "PCIE0_QSTAT_0,PCIE0 Queue Status Register" bitfld.long 0x00 31. " TMRMODFCEN ,FC Latency Timer Override Enable" "0,1" hexmask.long.word 0x00 16.--28. 1. " TMRMODFC ,Timer Mod Flow Control" bitfld.long 0x00 2. " RXNE ,Received Queue Not Empty" "0,1" bitfld.long 0x00 1. " TXRBNE ,Transmit Retry Buffer Not Empty" "0,1" newline bitfld.long 0x00 0. " RXTLPFCCNR ,Received TLP FC Credits Not Returned" "0,1" group.long 0x740++0x3 line.long 0x00 "PCIE0_VC_TXARB1_0,PCIE0 Virtual Channel Transmit Arbitration Register 1" hexmask.long.byte 0x00 24.--31. 1. " VC3WRR ,WRR Weight for VC3" hexmask.long.byte 0x00 16.--23. 1. " VC2WRR ,WRR Weight for VC2" hexmask.long.byte 0x00 8.--15. 1. " VC1WRR ,WRR Weight for VC1" hexmask.long.byte 0x00 0.--7. 1. " VC0WRR ,VC0 Weighted Round Robin Arbitration" group.long 0x744++0x3 line.long 0x00 "PCIE0_VC_TXARB2_0,PCIE0 Virtual Channel Transmit Arbitration Register 2" hexmask.long.byte 0x00 24.--31. 1. " VC7WRR ,WRR Weight for VC7" hexmask.long.byte 0x00 16.--23. 1. " VC6WRR ,WRR Weight for VC6" hexmask.long.byte 0x00 8.--15. 1. " VC5WRR ,WRR Weight for VC5" hexmask.long.byte 0x00 0.--7. 1. " VC4WRR ,WRR Weight for VC4" group.long 0x748++0x3 line.long 0x00 "PCIE0_VC0_PST_RXQCTL_0,PCIE0 Segmented-Buffer VC0 Posted Receive Queue Control Register" bitfld.long 0x00 31. " ORDRXQ ,VC Ordering for Receive Queues" "0,1" bitfld.long 0x00 30. " ORDTLPTYP ,TLP Type Ordering for VC0" "0,1" hexmask.long.byte 0x00 12.--19. 1. " PHC ,VC0 Posted Header Credits" hexmask.long.word 0x00 0.--11. 1. " PDC ,VC0 Posted Data Credits" group.long 0x74C++0x3 line.long 0x00 "PCIE0_VC0_NPST_RXQCTL_0,PCIE0 Segmented-Buffer VC0 Non-Posted Receive Queue Control Register" hexmask.long.byte 0x00 12.--19. 1. " NPHC ,VC0 Non-Posted Header Credits" hexmask.long.word 0x00 0.--11. 1. " NPDC ,VC0 Non-Posted Data Credits" group.long 0x750++0x3 line.long 0x00 "PCIE0_VC0_COMP_RXQCTL_0,PCIE0 Segmented-Buffer VC0 Completion Receive Queue Control Register" hexmask.long.byte 0x00 12.--19. 1. " CPLHC ,VC0 Completion Header Credits" hexmask.long.word 0x00 0.--11. 1. " CPLDC ,VC0 Completion Data Credits" group.long 0x80C++0x3 line.long 0x00 "PCIE0_GEN2_CTL_0,PCIE0 Link Width and Speed Change Control Register" bitfld.long 0x00 21. " GEN1EIINF ,Gen1 Electrical Idle Inference Mode Rate" "0,1" bitfld.long 0x00 20. " DEMPH ,De-emphasis Level for Upstream Ports" "0,1" bitfld.long 0x00 19. " TXCMPRX ,Transmit Compliance Receive" "0,1" bitfld.long 0x00 18. " PHYTXCHG ,Config PHY Tx Swing" "0,1" newline bitfld.long 0x00 17. " DIRSPDCHG ,Directed Speed Change" "0,1" hexmask.long.word 0x00 8.--16. 1. " NUMLANES ,Predetermined Number of Lanes" hexmask.long.byte 0x00 0.--7. 1. " FSTTRSEQ ,Fast Training Sequences" group.long 0x810++0x3 line.long 0x00 "PCIE0_PL_PHYSTAT_0,PCIE0 Port Control PHY Status Register" group.long 0x814++0x3 line.long 0x00 "PCIE0_PL_PHYCTL_0,PCIE0 Port Control PHY Control Register" group.long 0x820++0x3 line.long 0x00 "PCIE0_MSI_CTL_LADDR_0,PCIE0 MSI Controller Lower Address Register" group.long 0x824++0x3 line.long 0x00 "PCIE0_MSI_CTL_UADDR_0,PCIE0 MSI Controller Upper Address Register" group.long 0x828++0x3 line.long 0x00 "PCIE0_MSI_IEN0_0,PCIE0 MSI Controller Interrupt 0 Enable Register" group.long 0x82C++0x3 line.long 0x00 "PCIE0_MSI_IMSK0_0,PCIE0 MSI Controller Interrupt 0 Mask Register" group.long 0x830++0x3 line.long 0x00 "PCIE0_MSI_ISTAT0_0,PCIE0 MSI Controller Interrupt 0 Status Register" group.long 0x834++0x3 line.long 0x00 "PCIE0_MSI_IEN1_0,PCIE0 MSI Controller Interrupt 1 Enable Register" group.long 0x838++0x3 line.long 0x00 "PCIE0_MSI_IMSK1_0,PCIE0 MSI Controller Interrupt 1 Mask Register" group.long 0x83C++0x3 line.long 0x00 "PCIE0_MSI_ISTAT1_0,PCIE0 MSI Controller Interrupt 1 Status Register" group.long 0x840++0x3 line.long 0x00 "PCIE0_MSI_IEN2_0,PCIE0 MSI Controller Interrupt 2 Enable Register" group.long 0x844++0x3 line.long 0x00 "PCIE0_MSI_IMSK2_0,PCIE0 MSI Controller Interrupt 2 Mask Register" group.long 0x848++0x3 line.long 0x00 "PCIE0_MSI_ISTAT2_0,PCIE0 MSI Controller Interrupt 2 Status Register" group.long 0x84C++0x3 line.long 0x00 "PCIE0_MSI_IEN3_0,PCIE0 MSI Controller Interrupt 3 Enable Register" group.long 0x850++0x3 line.long 0x00 "PCIE0_MSI_IMSK3_0,PCIE0 MSI Controller Interrupt 3 Mask Register" group.long 0x854++0x3 line.long 0x00 "PCIE0_MSI_ISTAT3_0,PCIE0 MSI Controller Interrupt 3 Status Register" group.long 0x858++0x3 line.long 0x00 "PCIE0_MSI_IEN4_0,PCIE0 MSI Controller Interrupt 4 Enable Register" group.long 0x85C++0x3 line.long 0x00 "PCIE0_MSI_IMSK4_0,PCIE0 MSI Controller Interrupt 4 Mask Register" group.long 0x860++0x3 line.long 0x00 "PCIE0_MSI_ISTAT4_0,PCIE0 MSI Controller Interrupt 4 Status Register" group.long 0x864++0x3 line.long 0x00 "PCIE0_MSI_IEN5_0,PCIE0 MSI Controller Interrupt 5 Enable Register" group.long 0x868++0x3 line.long 0x00 "PCIE0_MSI_IMSK5_0,PCIE0 MSI Controller Interrupt 5 Mask Register" group.long 0x86C++0x3 line.long 0x00 "PCIE0_MSI_ISTAT5_0,PCIE0 MSI Controller Interrupt 5 Status Register" group.long 0x870++0x3 line.long 0x00 "PCIE0_MSI_IEN6_0,PCIE0 MSI Controller Interrupt 6 Enable Register" group.long 0x874++0x3 line.long 0x00 "PCIE0_MSI_IMSK6_0,PCIE0 MSI Controller Interrupt 6 Mask Register" group.long 0x878++0x3 line.long 0x00 "PCIE0_MSI_ISTAT6_0,PCIE0 MSI Controller Interrupt 6 Status Register" group.long 0x87C++0x3 line.long 0x00 "PCIE0_MSI_IEN7_0,PCIE0 MSI Controller Interrupt 7 Enable Register" group.long 0x880++0x3 line.long 0x00 "PCIE0_MSI_IMSK7_0,PCIE0 MSI Controller Interrupt 7 Mask Register" group.long 0x884++0x3 line.long 0x00 "PCIE0_MSI_ISTAT7_0,PCIE0 MSI Controller Interrupt 7 Status Register" group.long 0x888++0x3 line.long 0x00 "PCIE0_MSI_GPIO_IO_0,PCIE0 MSI Controller General-Purpose IO Register" group.long 0x8BC++0x3 line.long 0x00 "PCIE0_MISC_CTL1_0,PCIE0 DBI Read-Only Write Enable Register" bitfld.long 0x00 0. " RODBIWREN ,Write to RO Registers Using DBI" "0,1" group.long 0x8D0++0x3 line.long 0x00 "PCIE0_BERR_RESP_0,PCIE0 Peripheral and SCB Bridge Slave Error Response Register" bitfld.long 0x00 2. " VID ,Vendor ID Non-existent Slave Error Response Mapping" "0,1" bitfld.long 0x00 0. " MAP ,Global Slave Error Response Mapping" "0,1" group.long 0x8DC++0x3 line.long 0x00 "PCIE0_BUSMGR_WDOG_0,PCIE0 Bus Order Manager Watchdog Off Register" bitfld.long 0x00 31. " EN ,Ordering Manager Watchdog Timer Enable" "0,1" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Initial Value for Ordering" group.long 0x8E0++0x3 line.long 0x00 "PCIE0_CACHE_CTL1_0,PCIE0 ACE Cache Coherency Control Register 1" hexmask.long 0x00 2.--31. 1. " BNDADDRLO ,Boundary Lower Address For Memory Type" bitfld.long 0x00 0. " VALUE ,Memory Type" "0,1" group.long 0x8E8++0x3 line.long 0x00 "PCIE0_CACHE_CTL3_0,PCIE0 ACE Cache Coherency Control Register 3" bitfld.long 0x00 27.--30. " AWVAL ,Master Write CACHE Signal Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 19.--22. " ARVAL ,Master Read CACHE Signal Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 11.--14. " AWMD ,Master Write CACHE Signal Behavior" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3.--6. " ARMD ,Master Read CACHE Signal Behavior" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x900++0x3 line.long 0x00 "PCIE0_IATU_VWPRT_0,PCIE0 IATU View Port Register" bitfld.long 0x00 31. " REGNDIR ,Region Direction" "0,1" bitfld.long 0x00 0.--2. " REGNINDX ,Region Index" "0,1,2,3,4,5,6,7" group.long 0x904++0x3 line.long 0x00 "PCIE0_IATU_CTL1_INB_0,PCIE0 iATU Region Control 1 Inbound Register" bitfld.long 0x00 20.--24. " FUNCNUM ,Function Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--17. " AT ,Address Translation AT Value" "0,1,2,3" bitfld.long 0x00 9.--10. " ATTR ,Address Translation ATTR Value" "0,1,2,3" bitfld.long 0x00 8. " TD ,Address Translation TD Value" "0,1" newline bitfld.long 0x00 5.--7. " TC ,Address Translation TC Value" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--4. " TYPE ,Address Translation TYPE Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x904++0x3 line.long 0x00 "PCIE0_IATU_CTL1_OUTB_0,PCIE0 iATU Region Control 1 Outbound Register" bitfld.long 0x00 20.--24. " FUNCNUM ,Function Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 16.--17. " AT ,Address Translation AT Value" "0,1,2,3" bitfld.long 0x00 9.--10. " ATTR ,Address Translation ATTR Value" "0,1,2,3" bitfld.long 0x00 8. " TD ,Address Translation TD Value" "0,1" newline bitfld.long 0x00 5.--7. " TC ,Address Translation TC Value" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--4. " TYPE ,Address Translation TYPE Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x908++0x3 line.long 0x00 "PCIE0_IATU_CTL2_INB_0,PCIE0 iATU Region Control 2 Inbound Register" bitfld.long 0x00 31. " REGEN ,Region En" "0,1" bitfld.long 0x00 30. " MAT ,Match Mode" "0,1" bitfld.long 0x00 29. " INV ,Invert Mode" "0,1" bitfld.long 0x00 28. " CFGSHFT ,CFG Shift Mode" "0,1" newline bitfld.long 0x00 27. " FTMMODE ,Fuzzy Type Match Mode" "0,1" bitfld.long 0x00 24.--25. " RCODE ,Response Code" "0,1,2,3" bitfld.long 0x00 20. " VFM ,Virtual Function Number Match Enable" "0,1" bitfld.long 0x00 19. " FNM ,Function Number Match Enable" "0,1" newline bitfld.long 0x00 16. " ATTRM ,ATTR Match Enable" "0,1" bitfld.long 0x00 15. " TDM ,TD Match Enable" "0,1" bitfld.long 0x00 14. " TCM ,TC Match Enable" "0,1" bitfld.long 0x00 8.--10. " BARNUM ,BAR Number" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 0.--7. 1. " MSGCODE ,Message Code" group.long 0x908++0x3 line.long 0x00 "PCIE0_IATU_CTL2_OUTB_0,PCIE0 iATU Region Control 2 Register Outbound" bitfld.long 0x00 31. " REGEN ,Region Enable" "0,1" bitfld.long 0x00 29. " INV ,Invert Mode" "0,1" bitfld.long 0x00 28. " CFGSHFT ,Cfg Shift Mode" "0,1" bitfld.long 0x00 27. " DMA_BYP ,DMA Bypass Mode" "0,1" newline bitfld.long 0x00 19. " FUNCBYP ,Function Number Translation Bypass" "0,1" hexmask.long.byte 0x00 0.--7. 1. " MSGCODE ,Message Code for Address Translation" group.long 0x90C++0x3 line.long 0x00 "PCIE0_IATU_LBADDR_OUTB_0,PCIE0 IATU Lower Base Outbound Address Register" hexmask.long.word 0x00 16.--31. 1. " VAR ,Upper 16 bits of Address" hexmask.long.word 0x00 0.--15. 1. " FIXED ,Lower 16-bits of Address" group.long 0x90C++0x3 line.long 0x00 "PCIE0_IATU_LBADDR_INB_0,PCIE0 IATU Lower Base Inbound Address Register" hexmask.long.word 0x00 16.--31. 1. " VAR ,Upper 16 bits of Address" hexmask.long.word 0x00 0.--15. 1. " FIXED ,Lower 16-bits of Address" group.long 0x910++0x3 line.long 0x00 "PCIE0_IATU_UBADDR_INB_0,PCIE0 IATU Upper Base Address Inbound Register" group.long 0x910++0x3 line.long 0x00 "PCIE0_IATU_UBADDR_OUTB_0,PCIE0 IATU Upper Base Address Outbound Register" group.long 0x914++0x3 line.long 0x00 "PCIE0_IATU_LMTADDR_OUTB_0,PCIE0 IATU Outbound Limit Address Register" hexmask.long.word 0x00 16.--31. 1. " VAR ,Upper 16 bits of Limit address" hexmask.long.word 0x00 0.--15. 1. " FIXED ,Lower 16-bits of Limit Address" group.long 0x914++0x3 line.long 0x00 "PCIE0_IATU_LMTADDR_INB_0,PCIE0 IATU Inbound Limit Address Register" hexmask.long.word 0x00 16.--31. 1. " VAR ,Upper 16 bits of Limit Address" hexmask.long.word 0x00 0.--15. 1. " FIXED ,Lower 16-bits of Limit Address" group.long 0x918++0x3 line.long 0x00 "PCIE0_IATU_LTADDR_INB_0,PCIE0 IATU Lower Target Address Inbound Register" hexmask.long.word 0x00 16.--31. 1. " VAR ,Upper 16 bits of address" hexmask.long.word 0x00 0.--15. 1. " FIXED ,Lower 16-bits of Address" group.long 0x918++0x3 line.long 0x00 "PCIE0_IATU_LTADDR_OUTB_0,PCIE0 IATU Lower Target Address Outbound Register" hexmask.long.word 0x00 16.--31. 1. " VAR ,Upper 16 bits of Address" hexmask.long.word 0x00 0.--15. 1. " FIXED ,Lower 16-bits of Address" group.long 0x91C++0x3 line.long 0x00 "PCIE0_IATU_UTADDR_OUTB_0,PCIE0 iATU Upper Target Address Outbound Register" group.long 0x91C++0x3 line.long 0x00 "PCIE0_IATU_UTADDR_INB_0,PCIE0 iATU Upper Target Address Inbound Register" group.long 0x920++0x3 line.long 0x00 "PCIE0_IATU_CTL3_INB_0,PCIE0 iATU Region Control 3 Register" bitfld.long 0x00 31. " VFACT ,Vf Active" "0,1" bitfld.long 0x00 0. " VFNUM ,Vf Number" "0,1" group.long 0x920++0x3 line.long 0x00 "PCIE0_IATU_CTL3_OUTB_0,PCIE0 iATU Region Control 3 Register" bitfld.long 0x00 31. " VFACT ,Vf Active" "0,1" bitfld.long 0x00 0. " VFNUM ,Vf Number" "0,1" group.long 0x978++0x3 line.long 0x00 "PCIE0_DMA_CTL_0,PCIE0 DMA Number of Channels Register" bitfld.long 0x00 16.--19. " NUMRD ,Number of Read Channels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " NUMWR ,Number of Write Channels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x97C++0x3 line.long 0x00 "PCIE0_DMAWR_EN_0,PCIE0 DMA Write Engine Enable Register" bitfld.long 0x00 0. " EN ,DMA Write Engine Enable" "0,1" group.long 0x980++0x3 line.long 0x00 "PCIE0_DMAWR_DRBL_0,PCIE0 DMA Write Doorbell Register" bitfld.long 0x00 31. " STOP ,Stop Data Transfer" "0,1" bitfld.long 0x00 0.--2. " NUM ,Doorbell Number" "0,1,2,3,4,5,6,7" group.long 0x988++0x3 line.long 0x00 "PCIE0_DMAWR_ARBWGT_LO_0,PCIE0 DMA Write Channel Arbitration Weight Low Off Register" bitfld.long 0x00 0.--4. " CH0 ,Channel 0 Weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x998++0x3 line.long 0x00 "PCIE0_DMAWR_PREQ_TMR_0,PCIE0 DMA Write Posted Request Deadlock Timer Register" bitfld.long 0x00 15. " DIS ,DMA Write Posted Request Deadlock Timer Disable" "0,1" hexmask.long.word 0x00 0.--11. 1. " VALUE ,DMA Tx Posted Request Deadlock Timeout Value" group.long 0x99C++0x3 line.long 0x00 "PCIE0_DMARD_EN_0,PCIE0 DMA Read Engine Enable Register" bitfld.long 0x00 0. " EN ,DMA Read Engine Enable" "0,1" group.long 0x9A0++0x3 line.long 0x00 "PCIE0_DMARD_DRBL_0,PCIE0 DMA Read Doorbell Register" bitfld.long 0x00 31. " STOP ,Stop Issuing Requests" "0,1" bitfld.long 0x00 0.--2. " NUM ,Doorbell Number" "0,1,2,3,4,5,6,7" group.long 0x9A8++0x3 line.long 0x00 "PCIE0_DMARD_ARBWGT_LO_0,PCIE0 DMA Read Arbitration Weight Low Off Register" bitfld.long 0x00 0.--4. " CH0 ,Read Channel 0 Weight" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x9BC++0x3 line.long 0x00 "PCIE0_DMAWR_ISTAT_0,PCIE0 DMA Write Interrupt Status Register" hexmask.long.byte 0x00 16.--23. 1. " ABRT ,Abort Interrupt Status" hexmask.long.byte 0x00 0.--7. 1. " DONE ,Done Interrupt Status" group.long 0x9C4++0x3 line.long 0x00 "PCIE0_DMAWR_IMSK_0,PCIE0 DMA Write Interrupt Mask Register" hexmask.long.byte 0x00 16.--23. 1. " ABRT ,Abort Interrupt Mask" hexmask.long.byte 0x00 0.--7. 1. " DONE ,Done Interrupt Mask" group.long 0x9C8++0x3 line.long 0x00 "PCIE0_DMAWR_ICLR_0,PCIE0 DMA Write Interrupt Clear Register" hexmask.long.byte 0x00 16.--23. 1. " ABRT ,Abort Interrupt Clear" hexmask.long.byte 0x00 0.--7. 1. " DONE ,Done Interrupt Clear" group.long 0x9CC++0x3 line.long 0x00 "PCIE0_DMAWR_ERRSTAT_0,PCIE0 DMA Write Error Status Register" hexmask.long.byte 0x00 16.--23. 1. " LLSTERR ,Linked List Element Fetch Error Detected" hexmask.long.byte 0x00 0.--7. 1. " APPERR ,Application Read Error Detected" group.long 0x9D0++0x3 line.long 0x00 "PCIE0_DMAWR_DONE_IMWR_LO_0,PCIE0 DMA Write Done IMWr Address Low Register" group.long 0x9D4++0x3 line.long 0x00 "PCIE0_DMAWR_DONE_IMWR_HI_0,PCIE0 DMA Write Done IMWr Interrupt Address High Register" group.long 0x9D8++0x3 line.long 0x00 "PCIE0_DMAWR_ABRT_IMWR_LO0,PCIE0 DMA Write Abort IMWr Address Low Register" group.long 0x9DC++0x3 line.long 0x00 "PCIE0_DMAWR_ABRT_IMWR_HI0,PCIE0 DMA Write Abort IMWr Address High Register" group.long 0x9E0++0x3 line.long 0x00 "PCIE0_DMAWR_CH01_IMWR_0,PCIE0 DMA Write Channel 1 and 0 IMWr Data Register" hexmask.long.word 0x00 0.--15. 1. " CH0 ,Write Channel 0 Data" group.long 0xA00++0x3 line.long 0x00 "PCIE0_DMAWR_LLSTERR_EN_0,PCIE0 DMA Write Linked List Error Enable Register" hexmask.long.byte 0x00 16.--23. 1. " LAIE ,Write Channel LL Local Abort Interrupt Enable" hexmask.long.byte 0x00 0.--7. 1. " RAIE ,Write Channel LL Remote Abort Interrupt Enable" group.long 0xA10++0x3 line.long 0x00 "PCIE0_DMARD_ISTAT_0,PCIE0 DMA Read Interrupt Status Register" hexmask.long.byte 0x00 16.--23. 1. " ABRT ,Abort Interrupt Status" hexmask.long.byte 0x00 0.--7. 1. " DONE ,Done Interrupt Status" group.long 0xA18++0x3 line.long 0x00 "PCIE0_DMARD_IMSK_0,PCIE0 DMA Read Interrupt Mask Register" hexmask.long.byte 0x00 16.--23. 1. " ABRT ,Abort Interrupt Mask" hexmask.long.byte 0x00 0.--7. 1. " DONE ,Done Interrupt Mask" group.long 0xA1C++0x3 line.long 0x00 "PCIE0_DMARD_ICLR_0,PCIE0 DMA Read Interrupt Clear Register" hexmask.long.byte 0x00 16.--23. 1. " ABRT ,Abort Interrupt Clear" hexmask.long.byte 0x00 0.--7. 1. " DONE ,Done Interrupt Clear" group.long 0xA24++0x3 line.long 0x00 "PCIE0_DMARD_ERRSTAT_LO_0,PCIE0 DMA Read Error Status Low Register" hexmask.long.byte 0x00 16.--23. 1. " LLSTERR ,Linked List Element Fetch Error Detected" hexmask.long.byte 0x00 0.--7. 1. " APPERR ,Application Write Error Detected" group.long 0xA28++0x3 line.long 0x00 "PCIE0_DMARD_ERRSTAT_HI_0,PCIE0 DMA Read Error Status High Register" hexmask.long.byte 0x00 24.--31. 1. " DPOISON ,Data Poisoning" hexmask.long.byte 0x00 16.--23. 1. " CPLTMO ,Completion Time Out" hexmask.long.byte 0x00 8.--15. 1. " CPLABRT ,Completer Abort" hexmask.long.byte 0x00 0.--7. 1. " UNSUPREQ ,Unsupported Request" group.long 0xA34++0x3 line.long 0x00 "PCIE0_DMARD_LLSTERR_EN_0,PCIE0 DMA Read Linked List Error Enable Register" hexmask.long.byte 0x00 16.--23. 1. " LAIE ,Read Channel LL Local Abort Interrupt Enable" hexmask.long.byte 0x00 0.--7. 1. " RAIE ,Read Channel LL Remote Abort Interrupt Enable" group.long 0xA3C++0x3 line.long 0x00 "PCIE0_DMARD_DONE_IMWR_LO_0,PCIE0 DMA Read Done IMWr Address Low Register" group.long 0xA40++0x3 line.long 0x00 "PCIE0_DMARD_DONE_IMWR_HI_0,PCIE0 DMA Read Done IMWr Address High Register" group.long 0xA44++0x3 line.long 0x00 "PCIE0_DMARD_IMWRABRT_LO_0,PCIE0 DMA Read Abort IMWr Address Low Register" group.long 0xA48++0x3 line.long 0x00 "PCIE0_DMARD_IMWRABRT_HI_0,PCIE0 DMA Read Abort IMWr Address High Register" group.long 0xA4C++0x3 line.long 0x00 "PCIE0_DMARD_CH01_IMWR_0,PCIE0 DMA Read Channel 1 and 0 IMWr Data Register" hexmask.long.word 0x00 0.--15. 1. " CH0 ,Read Channel 0 Data" group.long 0xA6C++0x3 line.long 0x00 "PCIE0_DMA_VWPRT_SEL_0,PCIE0 DMA Channel Context Index Register" bitfld.long 0x00 31. " DIR ,Channel Direction" "0,1" bitfld.long 0x00 0.--2. " NUM ,Channel Index" "0,1,2,3,4,5,6,7" group.long 0xA70++0x3 line.long 0x00 "PCIE0_DMAWR_CTL1_0,PCIE0 DMA Control 1 Write Channel Register" bitfld.long 0x00 30.--31. " AT ,Address Translation" "0,1,2,3" bitfld.long 0x00 27.--29. " TC ,Traffic Class TLP Header Bit" "0,1,2,3,4,5,6,7" bitfld.long 0x00 26. " TD ,Traffic Digest" "0,1" bitfld.long 0x00 25. " RO ,Relaxed Ordering" "0,1" newline bitfld.long 0x00 24. " NS ,No Snoop TLP Header" "0,1" bitfld.long 0x00 12.--16. " FNUM ,DMA Function Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 9. " LLE ,Linked List Enable" "0,1" bitfld.long 0x00 8. " CCS ,Consumer Cycle State" "0,1" newline bitfld.long 0x00 5.--6. " CS ,Channel Status" "0,1,2,3" bitfld.long 0x00 4. " RIE ,Remote Interrupt Enable" "0,1" bitfld.long 0x00 3. " LIE ,Local Interrupt Enable" "0,1" bitfld.long 0x00 2. " LLP ,Load Link Pointer" "0,1" newline bitfld.long 0x00 1. " TCB ,Toggle Cycle Bit" "0,1" bitfld.long 0x00 0. " CB ,Cycle Bit" "0,1" group.long 0xA70++0x3 line.long 0x00 "PCIE0_DMARD_CTL1_0,PCIE0 DMA Control 1 Read Channel Register" bitfld.long 0x00 30.--31. " AT ,Address Translation TLP Header" "0,1,2,3" bitfld.long 0x00 27.--29. " TC ,Traffic Class TLP Header" "0,1,2,3,4,5,6,7" bitfld.long 0x00 26. " TD ,Traffic Digest TLP Header" "0,1" bitfld.long 0x00 25. " RO ,Relaxed Ordering TLP Header" "0,1" newline bitfld.long 0x00 24. " NS ,No Snoop TLP Header" "0,1" bitfld.long 0x00 12.--16. " FNUM ,DMA Function Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 9. " LLE ,Linked List Enable" "0,1" bitfld.long 0x00 8. " CCS ,Consumer Cycle State" "0,1" newline bitfld.long 0x00 5.--6. " CS ,Channel Status" "0,1,2,3" bitfld.long 0x00 4. " RIE ,Remote Interrupt Enable" "0,1" bitfld.long 0x00 3. " LIE ,Local Interrupt Enable" "0,1" bitfld.long 0x00 2. " LLP ,Load Link Pointer" "0,1" newline bitfld.long 0x00 1. " TCB ,Toggle Cycle Bit" "0,1" bitfld.long 0x00 0. " CB ,Cycle Bit" "0,1" group.long 0xA78++0x3 line.long 0x00 "PCIE0_DMAWR_XFRSZ_00,PCIE0 DMA Transfer Size Write Channel Register" group.long 0xA78++0x3 line.long 0x00 "PCIE0_DMARD_XFRSZ_0,PCIE0 DMA Transfer Size Read Channel Register" group.long 0xA7C++0x3 line.long 0x00 "PCIE0_DMARD_SAR_LO_0,PCIE0 DMA SAR Low Read Channel Register" group.long 0xA7C++0x3 line.long 0x00 "PCIE0_DMAWR_SAR_LO_0,PCIE0 DMA SAR Low Write Channel Register" group.long 0xA80++0x3 line.long 0x00 "PCIE0_DMAWR_SAR_HI_0,PCIE0 DMA SAR High Write Channel Register" group.long 0xA80++0x3 line.long 0x00 "PCIE0_DMARD_SAR_HI_0,PCIE0 DMA SAR High Read Channel Register" group.long 0xA84++0x3 line.long 0x00 "PCIE0_DMARD_DAR_LO_0,PCIE0 DMA Destination Address Low Read Channel Register" group.long 0xA84++0x3 line.long 0x00 "PCIE0_DMAWR_DAR_LO_0,PCIE0 DMA DAR Low Write Channel Register" group.long 0xA88++0x3 line.long 0x00 "PCIE0_DMARD_DAR_HI_0,PCIE0 DMA Destination Address High Read Channel Register" group.long 0xA88++0x3 line.long 0x00 "PCIE0_DMAWR_DAR_HI_0,PCIE0 DMA Dar High Write Channel Register" group.long 0xA8C++0x3 line.long 0x00 "PCIE0_DMARD_LLP_LO_0,PCIE0 DMA LLP Low Read Channel Register" group.long 0xA8C++0x3 line.long 0x00 "PCIE0_DMAWR_LLP_LO_0,PCIE0 DMA LLP Low Write Channel Register" group.long 0xA90++0x3 line.long 0x00 "PCIE0_DMAWR_LLP_HI_0,PCIE0 DMA LLP High Write Channel Register" group.long 0xA90++0x3 line.long 0x00 "PCIE0_DMARD_LLP_HI_0,PCIE0 DMA LLP High Read Channel Register" group.long 0xB40++0x3 line.long 0x00 "PCIE0_AUX_CLKFREQ_0,PCIE0 Auxiliary Clock Frequency Control Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Auxiliary clock frequency in MHz" group.long 0x1010++0x3 line.long 0x00 "PCIE0_EP_BAR0_MASK0,PCIE0 Endpoint Base Address Mask Register 0" bitfld.long 0x00 0. " ENABLED ,Enable BAR Register" "0,1" group.long 0x1014++0x3 line.long 0x00 "PCIE0_EP_BAR1_MASK0,PCIE0 Endpoint Base Address Mask Register 1" bitfld.long 0x00 0. " ENABLED ,Enable BAR Register" "0,1" group.long 0x1018++0x3 line.long 0x00 "PCIE0_EP_BAR2_MASK0,PCIE0 Endpoint Base Address Mask Register 2" bitfld.long 0x00 0. " ENABLED ,Enable BAR Register" "0,1" group.long 0x101C++0x3 line.long 0x00 "PCIE0_EP_BAR3_MASK0,PCIE0 Endpoint Base Address Mask Register 3" bitfld.long 0x00 0. " ENABLED ,Enable BAR Register" "0,1" group.long 0x1020++0x3 line.long 0x00 "PCIE0_EP_BAR4_MASK0,PCIE0 Endpoint Base Address Mask Register 4" bitfld.long 0x00 0. " ENABLED ,Enable BAR Register" "0,1" group.long 0x1024++0x3 line.long 0x00 "PCIE0_EP_BAR5_MASK0,PCIE0 Endpoint Base Address Mask Register 5" bitfld.long 0x00 0. " ENABLED ,Enable BAR Register" "0,1" group.long 0x2C00++0x3 line.long 0x00 "PCIE0_APP_CTL,PCIE0 Application Control Register" bitfld.long 0x00 29. " LNKUPINTDIS ,Link UP Interrupt Disabled" "0,1" bitfld.long 0x00 28. " RXQOVFIEN ,Receive Queues Overflow Interrupt Enabled" "0,1" bitfld.long 0x00 27. " PMTOFFINTEN ,Inbound Power Management Turn Off Message Interrupt Enabled" "0,1" bitfld.long 0x00 26. " PMACKIEN ,Inbound Power Management Ack Message Interrupt Enabled" "0,1" newline bitfld.long 0x00 25. " PMEINTEN ,Inbound Power Management Event Message Interrupt Enabled" "0,1" bitfld.long 0x00 24. " FERRIEN ,Inbound Fatal Error Message Interrupt Enabled" "0,1" bitfld.long 0x00 23. " NFTLERRINTEN ,Inbound Non Fatal Error Message Interrupt Enabled" "0,1" bitfld.long 0x00 22. " CORERRIEN ,Inbound Correctable Error Message Interrupt Enabled" "0,1" newline bitfld.long 0x00 21. " UNLKIEN ,Inbound Unlock Message Interrupt Enabled" "0,1" bitfld.long 0x00 20. " VENINTEN ,Inbound Vendor Message Interrupt Enabled" "0,1" bitfld.long 0x00 19. " DIEN ,Legacy Interrupt D Enabled" "0,1" bitfld.long 0x00 18. " CIEN ,Legacy Interrupt C Enabled" "0,1" newline bitfld.long 0x00 17. " BIEN ,Legacy Interrupt B Enabled" "0,1" bitfld.long 0x00 16. " AIEN ,Legacy Interrupt A Enabled" "0,1" bitfld.long 0x00 12. " UNLKREQ ,Generate an Unlock Message" "0,1" bitfld.long 0x00 11. " PMOFFREQ ,Generate a PM_Turn_Off Message (RC only)" "0,1" newline bitfld.long 0x00 5.--9. " MSIVECT ,MSI_VECTOR for Multiple Interrupt Sources" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 4. " INTACLR ,Clear an EP INTA" "0,1" bitfld.long 0x00 3. " INTREQ ,Generate an EP Interrupt" "0,1" bitfld.long 0x00 2. " RTRYEN ,Application Retry Enable" "0,1" newline bitfld.long 0x00 1. " INITDSRST ,Initiate Downstream Hot Reset" "0,1" bitfld.long 0x00 0. " LTSSMEN ,Link Training State Machine Enabled" "0,1" group.long 0x2C04++0x3 line.long 0x00 "PCIE0_APP_STAT,PCIE0 Application Status Register" bitfld.long 0x00 8. " RXQNEMPTY ,Receive Queues Not Empty" "0,1" bitfld.long 0x00 4. " OUTSTINTA ,Outstanding INTA" "0,1" bitfld.long 0x00 3. " OUTSTMSI ,Outstanding MSI" "0,1" bitfld.long 0x00 2. " MSIGRANT ,MSI Granted" "0,1" newline bitfld.long 0x00 1. " MSIEN ,MSI Enabled" "0,1" bitfld.long 0x00 0. " LNKUP ,Link is Up" "0,1" group.long 0x2C08++0x3 line.long 0x00 "PCIE0_APP_INTSTAT,PCIE0 Application Interrupts Status Register" bitfld.long 0x00 17. " LNKUP ,LINK Up Interrupt asserted" "0,1" bitfld.long 0x00 16. " RXQOVF ,Receive Queue Overflow asserted" "0,1" bitfld.long 0x00 15. " PMTOFF ,Power Management Turn Off Message" "0,1" bitfld.long 0x00 14. " PMTOACK ,Power Management Acknowledge Message" "0,1" newline bitfld.long 0x00 13. " PME ,Power Management Event Message" "0,1" bitfld.long 0x00 12. " FTLERR ,Fatal Error Message" "0,1" bitfld.long 0x00 11. " NFTLERR ,Non Fatal Error Message" "0,1" bitfld.long 0x00 10. " CORERR ,Correctable Error Message" "0,1" newline bitfld.long 0x00 9. " UNLK ,Unlock Message" "0,1" bitfld.long 0x00 8. " VENDMSG ,Vendor Message" "0,1" bitfld.long 0x00 4. " INTD ,INTD Asserted" "0,1" bitfld.long 0x00 3. " INTC ,INTC Asserted" "0,1" newline bitfld.long 0x00 2. " INTB ,INTB Asserted" "0,1" bitfld.long 0x00 1. " INTA ,INTA Asserted" "0,1" bitfld.long 0x00 0. " MSI ,MSI Interrupt" "0,1" group.long 0x2C14++0x3 line.long 0x00 "PCIE0_APP_VNDR_MSG_HDR0,PCIE0 Vendor Message Header Bytes 8 to 11 Register" group.long 0x2C18++0x3 line.long 0x00 "PCIE0_APP_VNDR_MSG_HDR1,PCIE0 Vendor Message Header Bytes 12 to 15 Register" group.long 0x2C1C++0x3 line.long 0x00 "PCIE0_APP_VNDR_MSG,PCIE0 Vendor Message Requester ID Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Message ID" group.long 0x2C28++0x3 line.long 0x00 "PCIE0_APP_UNLK_MSG,PCIE0 Unlock Message Requester ID Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Message ID" group.long 0x2C34++0x3 line.long 0x00 "PCIE0_APP_CORERR_MSG,PCIE0 Correctable Error Message Requester ID Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Message ID" group.long 0x2C40++0x3 line.long 0x00 "PCIE0_APP_NFERR_MSG,PCIE0 Non Fatal Error Message Requester ID Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Message ID" group.long 0x2C4C++0x3 line.long 0x00 "PCIE0_APP_FERR_MSG,PCIE0 Fatal Error Message Requester ID Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Message ID" group.long 0x2C58++0x3 line.long 0x00 "PCIE0_APP_PMEVT_MSG,PCIE0 Power Management Event Message Requester ID Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Message ID" group.long 0x2C64++0x3 line.long 0x00 "PCIE0_APP_PMACK_MSG,PCIE0 Power Management Acknowledge Message Requester ID Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Message ID" group.long 0x2C70++0x3 line.long 0x00 "PCIE0_APP_PMTOFF_MSG,PCIE0 Power Management Turn Off Message Requester ID Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Message ID" group.long 0x2C74++0x3 line.long 0x00 "PCIE0_APP_DIAGCTL,PCIE0 Diagnostic Control Register" bitfld.long 0x00 1. " ECRCERR ,ECRC Error Generated" "0,1" bitfld.long 0x00 0. " LCRCGEN ,LCRC Error Generated" "0,1" group.long 0x2C78++0x3 line.long 0x00 "PCIE0_APP_DIAGSTAT,PCIE0 Diagnostic Status Register" bitfld.long 0x00 1. " ECRC ,End-to-end CRC Error Asserted" "0,1" bitfld.long 0x00 0. " LCRC ,Link CRC Error Asserted" "0,1" group.long 0x3000++0x3 line.long 0x00 "PCIE0_RSCK_CTL,PCIE0 Reset and Clock Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 8. " DBISLVDIS ,AXI DBI and AXI SLV Access Disabled" "0,1" bitfld.long 0x00 7. " PMPMEREQ ,Generate a PM_PME message (EP only)" "0,1" bitfld.long 0x00 6. " RFCKRMREQ ,Reference Clock Removal Request Enabled" "0,1" newline bitfld.long 0x00 2.--5. " DEVTYP ,Device Type" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 1. " RESDELEN ,Reset Delay Enabled" "0,1" bitfld.long 0x00 0. " PCIERES ,PCIe Power Reset" "0,1" group.long 0x3004++0x3 line.long 0x00 "PCIE0_RSCK_STAT,PCIE0 Reset and Clock Status" bitfld.long 0x00 18. " IDWERR ,ID Write Error" "0,1" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADDRERR ,Address Error" "0,1" bitfld.long 0x00 10. " PHSTAT ,PHY Status Change is Completed" "0,1" newline bitfld.long 0x00 7.--9. " DSTATE ,Power Management D-state" "0,1,2,3,4,5,6,7" bitfld.long 0x00 6. " RFCKRMEN ,Local Reference Clock Removal Enabled" "0,1" bitfld.long 0x00 5. " WRMHTRST ,Warm or Hot Reset Request" "0,1" bitfld.long 0x00 4. " DBIRST ,AXI Master Interface Reset" "0,1" newline bitfld.long 0x00 3. " SLVRST ,AXI Slave Interface Reset" "0,1" bitfld.long 0x00 2. " MSTRST ,AXI Master Interface Reset" "0,1" bitfld.long 0x00 1. " PHYRST ,PCIe PHY Reset" "0,1" bitfld.long 0x00 0. " CORERST ,PCIe Core Reset" "0,1" group.long 0x3008++0x3 line.long 0x00 "PCIE0_PHY_TXDEEMPH,PCIE0 TX De-emphasis Parameters Register" bitfld.long 0x00 12.--17. " GEN2_6 ,Tx De-emphasis at 6 dB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 6.--11. " GEN2_35 ,Tx De-emphasis at 3.5 dB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. " GEN1 ,Tx De-emphasis at 3.5 dB" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x300C++0x3 line.long 0x00 "PCIE0_PHY_TXSWING,PCIE0 TX Launch Amplitude Register" hexmask.long.byte 0x00 7.--13. 1. " LOW ,Tx Amplitude (LowSwing Mode)" hexmask.long.byte 0x00 0.--6. 1. " FULL ,Tx Amplitude (Full Swing Mode)" tree.end endif tree "PINT (Pin Interrupts)" tree "PINT0" base ad:0x31005000 width 16. group.long 0x0++0x3 line.long 0x00 "PINT0_MSK_SET,PINT0 PINT Mask Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Unmask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Unmask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Unmask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Unmask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Unmask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Unmask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Unmask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Unmask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Unmask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Unmask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Unmask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Unmask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Unmask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Unmask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Unmask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Unmask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Unmask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Unmask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Unmask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Unmask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Unmask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Unmask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Unmask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Unmask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Unmask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Unmask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Unmask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Unmask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Unmask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Unmask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Unmask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Unmask" "0,1" group.long 0x4++0x3 line.long 0x00 "PINT0_MSK_CLR,PINT0 PINT Mask Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Mask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Mask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Mask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Mask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Mask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Mask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Mask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Mask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Mask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Mask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Mask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Mask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Mask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Mask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Mask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Mask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Mask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Mask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Mask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Mask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Mask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Mask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Mask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Mask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Mask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Mask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Mask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Mask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Mask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Mask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Mask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Mask" "0,1" group.long 0x8++0x3 line.long 0x00 "PINT0_REQ,PINT0 PINT Request Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Request" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Request" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Request" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Request" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Request" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Request" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Request" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Request" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Request" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Request" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Request" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Request" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Request" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Request" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Request" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Request" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Request" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Request" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Request" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Request" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Request" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Request" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Request" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Request" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Request" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Request" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Request" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Request" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Request" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Request" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Request" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Request" "0,1" group.long 0xC++0x3 line.long 0x00 "PINT0_ASSIGN,PINT0 PINT Assign Register" hexmask.long.byte 0x00 24.--31. 1. " B3MAP ,Byte 3 Mapping" hexmask.long.byte 0x00 16.--23. 1. " B2MAP ,Byte 2 Mapping" hexmask.long.byte 0x00 8.--15. 1. " B1MAP ,Byte 1 Mapping" hexmask.long.byte 0x00 0.--7. 1. " B0MAP ,Byte 0 Mapping" group.long 0x10++0x3 line.long 0x00 "PINT0_EDGE_SET,PINT0 PINT Edge Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Edge" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Edge" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Edge" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Edge" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Edge" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Edge" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Edge" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Edge" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Edge" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Edge" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Edge" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Edge" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Edge" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Edge" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Edge" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Edge" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Edge" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Edge" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Edge" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Edge" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Edge" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Edge" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Edge" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Edge" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Edge" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Edge" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Edge" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Edge" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Edge" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Edge" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Edge" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Edge" "0,1" group.long 0x14++0x3 line.long 0x00 "PINT0_EDGE_CLR,PINT0 PINT Edge Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Level" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Level" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Level" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Level" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Level" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Level" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Level" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Level" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Level" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Level" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Level" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Level" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Level" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Level" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Level" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Level" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Level" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Level" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Level" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Level" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Level" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Level" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Level" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Level" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Level" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Level" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Level" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Level" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Level" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Level" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Level" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Level" "0,1" group.long 0x18++0x3 line.long 0x00 "PINT0_INV_SET,PINT0 PINT Invert Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Invert" "0,1" group.long 0x1C++0x3 line.long 0x00 "PINT0_INV_CLR,PINT0 PINT Invert Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 No Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 No Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 No Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 No Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 No Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 No Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 No Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 No Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 No Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 No Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 No Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 No Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 No Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 No Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 No Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 No Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 No Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 No Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 No Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 No Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 No Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 No Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 No Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 No Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 No Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 No Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 No Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 No Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 No Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 No Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 No Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 No Invert" "0,1" group.long 0x20++0x3 line.long 0x00 "PINT0_PINSTATE,PINT0 PINT Pin State Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 State" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 State" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 State" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 State" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 State" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 State" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 State" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 State" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 State" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 State" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 State" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 State" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 State" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 State" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 State" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 State" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 State" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 State" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 State" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 State" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 State" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 State" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 State" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 State" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 State" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 State" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 State" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 State" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 State" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 State" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 State" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 State" "0,1" group.long 0x24++0x3 line.long 0x00 "PINT0_LATCH,PINT0 PINT Latch Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Latch" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Latch" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Latch" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Latch" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Latch" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Latch" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Latch" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Latch" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Latch" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Latch" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Latch" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Latch" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Latch" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Latch" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Latch" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Latch" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Latch" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Latch" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Latch" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Latch" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Latch" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Latch" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Latch" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Latch" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Latch" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Latch" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Latch" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Latch" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Latch" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Latch" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Latch" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Latch" "0,1" tree.end tree "PINT1" base ad:0x31005100 width 16. group.long 0x0++0x3 line.long 0x00 "PINT1_MSK_SET,PINT1 PINT Mask Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Unmask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Unmask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Unmask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Unmask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Unmask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Unmask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Unmask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Unmask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Unmask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Unmask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Unmask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Unmask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Unmask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Unmask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Unmask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Unmask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Unmask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Unmask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Unmask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Unmask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Unmask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Unmask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Unmask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Unmask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Unmask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Unmask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Unmask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Unmask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Unmask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Unmask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Unmask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Unmask" "0,1" group.long 0x4++0x3 line.long 0x00 "PINT1_MSK_CLR,PINT1 PINT Mask Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Mask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Mask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Mask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Mask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Mask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Mask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Mask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Mask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Mask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Mask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Mask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Mask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Mask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Mask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Mask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Mask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Mask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Mask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Mask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Mask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Mask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Mask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Mask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Mask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Mask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Mask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Mask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Mask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Mask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Mask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Mask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Mask" "0,1" group.long 0x8++0x3 line.long 0x00 "PINT1_REQ,PINT1 PINT Request Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Request" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Request" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Request" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Request" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Request" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Request" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Request" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Request" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Request" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Request" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Request" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Request" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Request" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Request" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Request" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Request" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Request" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Request" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Request" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Request" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Request" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Request" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Request" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Request" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Request" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Request" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Request" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Request" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Request" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Request" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Request" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Request" "0,1" group.long 0xC++0x3 line.long 0x00 "PINT1_ASSIGN,PINT1 PINT Assign Register" hexmask.long.byte 0x00 24.--31. 1. " B3MAP ,Byte 3 Mapping" hexmask.long.byte 0x00 16.--23. 1. " B2MAP ,Byte 2 Mapping" hexmask.long.byte 0x00 8.--15. 1. " B1MAP ,Byte 1 Mapping" hexmask.long.byte 0x00 0.--7. 1. " B0MAP ,Byte 0 Mapping" group.long 0x10++0x3 line.long 0x00 "PINT1_EDGE_SET,PINT1 PINT Edge Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Edge" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Edge" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Edge" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Edge" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Edge" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Edge" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Edge" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Edge" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Edge" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Edge" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Edge" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Edge" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Edge" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Edge" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Edge" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Edge" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Edge" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Edge" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Edge" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Edge" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Edge" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Edge" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Edge" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Edge" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Edge" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Edge" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Edge" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Edge" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Edge" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Edge" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Edge" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Edge" "0,1" group.long 0x14++0x3 line.long 0x00 "PINT1_EDGE_CLR,PINT1 PINT Edge Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Level" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Level" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Level" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Level" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Level" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Level" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Level" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Level" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Level" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Level" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Level" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Level" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Level" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Level" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Level" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Level" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Level" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Level" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Level" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Level" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Level" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Level" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Level" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Level" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Level" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Level" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Level" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Level" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Level" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Level" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Level" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Level" "0,1" group.long 0x18++0x3 line.long 0x00 "PINT1_INV_SET,PINT1 PINT Invert Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Invert" "0,1" group.long 0x1C++0x3 line.long 0x00 "PINT1_INV_CLR,PINT1 PINT Invert Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 No Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 No Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 No Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 No Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 No Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 No Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 No Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 No Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 No Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 No Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 No Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 No Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 No Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 No Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 No Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 No Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 No Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 No Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 No Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 No Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 No Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 No Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 No Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 No Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 No Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 No Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 No Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 No Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 No Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 No Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 No Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 No Invert" "0,1" group.long 0x20++0x3 line.long 0x00 "PINT1_PINSTATE,PINT1 PINT Pin State Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 State" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 State" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 State" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 State" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 State" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 State" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 State" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 State" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 State" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 State" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 State" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 State" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 State" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 State" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 State" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 State" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 State" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 State" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 State" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 State" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 State" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 State" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 State" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 State" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 State" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 State" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 State" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 State" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 State" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 State" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 State" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 State" "0,1" group.long 0x24++0x3 line.long 0x00 "PINT1_LATCH,PINT1 PINT Latch Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Latch" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Latch" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Latch" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Latch" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Latch" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Latch" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Latch" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Latch" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Latch" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Latch" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Latch" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Latch" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Latch" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Latch" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Latch" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Latch" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Latch" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Latch" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Latch" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Latch" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Latch" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Latch" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Latch" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Latch" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Latch" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Latch" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Latch" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Latch" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Latch" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Latch" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Latch" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Latch" "0,1" tree.end tree "PINT2" base ad:0x31005200 width 16. group.long 0x0++0x3 line.long 0x00 "PINT2_MSK_SET,PINT2 PINT Mask Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Unmask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Unmask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Unmask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Unmask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Unmask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Unmask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Unmask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Unmask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Unmask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Unmask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Unmask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Unmask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Unmask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Unmask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Unmask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Unmask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Unmask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Unmask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Unmask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Unmask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Unmask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Unmask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Unmask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Unmask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Unmask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Unmask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Unmask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Unmask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Unmask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Unmask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Unmask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Unmask" "0,1" group.long 0x4++0x3 line.long 0x00 "PINT2_MSK_CLR,PINT2 PINT Mask Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Mask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Mask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Mask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Mask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Mask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Mask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Mask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Mask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Mask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Mask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Mask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Mask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Mask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Mask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Mask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Mask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Mask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Mask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Mask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Mask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Mask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Mask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Mask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Mask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Mask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Mask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Mask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Mask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Mask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Mask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Mask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Mask" "0,1" group.long 0x8++0x3 line.long 0x00 "PINT2_REQ,PINT2 PINT Request Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Request" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Request" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Request" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Request" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Request" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Request" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Request" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Request" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Request" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Request" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Request" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Request" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Request" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Request" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Request" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Request" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Request" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Request" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Request" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Request" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Request" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Request" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Request" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Request" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Request" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Request" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Request" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Request" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Request" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Request" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Request" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Request" "0,1" group.long 0xC++0x3 line.long 0x00 "PINT2_ASSIGN,PINT2 PINT Assign Register" hexmask.long.byte 0x00 24.--31. 1. " B3MAP ,Byte 3 Mapping" hexmask.long.byte 0x00 16.--23. 1. " B2MAP ,Byte 2 Mapping" hexmask.long.byte 0x00 8.--15. 1. " B1MAP ,Byte 1 Mapping" hexmask.long.byte 0x00 0.--7. 1. " B0MAP ,Byte 0 Mapping" group.long 0x10++0x3 line.long 0x00 "PINT2_EDGE_SET,PINT2 PINT Edge Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Edge" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Edge" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Edge" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Edge" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Edge" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Edge" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Edge" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Edge" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Edge" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Edge" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Edge" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Edge" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Edge" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Edge" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Edge" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Edge" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Edge" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Edge" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Edge" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Edge" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Edge" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Edge" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Edge" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Edge" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Edge" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Edge" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Edge" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Edge" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Edge" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Edge" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Edge" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Edge" "0,1" group.long 0x14++0x3 line.long 0x00 "PINT2_EDGE_CLR,PINT2 PINT Edge Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Level" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Level" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Level" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Level" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Level" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Level" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Level" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Level" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Level" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Level" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Level" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Level" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Level" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Level" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Level" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Level" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Level" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Level" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Level" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Level" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Level" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Level" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Level" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Level" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Level" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Level" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Level" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Level" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Level" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Level" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Level" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Level" "0,1" group.long 0x18++0x3 line.long 0x00 "PINT2_INV_SET,PINT2 PINT Invert Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Invert" "0,1" group.long 0x1C++0x3 line.long 0x00 "PINT2_INV_CLR,PINT2 PINT Invert Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 No Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 No Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 No Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 No Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 No Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 No Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 No Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 No Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 No Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 No Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 No Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 No Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 No Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 No Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 No Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 No Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 No Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 No Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 No Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 No Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 No Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 No Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 No Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 No Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 No Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 No Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 No Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 No Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 No Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 No Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 No Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 No Invert" "0,1" group.long 0x20++0x3 line.long 0x00 "PINT2_PINSTATE,PINT2 PINT Pin State Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 State" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 State" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 State" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 State" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 State" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 State" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 State" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 State" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 State" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 State" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 State" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 State" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 State" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 State" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 State" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 State" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 State" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 State" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 State" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 State" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 State" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 State" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 State" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 State" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 State" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 State" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 State" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 State" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 State" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 State" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 State" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 State" "0,1" group.long 0x24++0x3 line.long 0x00 "PINT2_LATCH,PINT2 PINT Latch Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Latch" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Latch" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Latch" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Latch" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Latch" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Latch" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Latch" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Latch" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Latch" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Latch" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Latch" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Latch" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Latch" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Latch" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Latch" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Latch" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Latch" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Latch" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Latch" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Latch" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Latch" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Latch" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Latch" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Latch" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Latch" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Latch" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Latch" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Latch" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Latch" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Latch" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Latch" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Latch" "0,1" tree.end tree "PINT3" base ad:0x31005300 width 16. group.long 0x0++0x3 line.long 0x00 "PINT3_MSK_SET,PINT3 PINT Mask Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Unmask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Unmask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Unmask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Unmask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Unmask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Unmask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Unmask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Unmask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Unmask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Unmask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Unmask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Unmask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Unmask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Unmask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Unmask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Unmask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Unmask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Unmask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Unmask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Unmask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Unmask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Unmask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Unmask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Unmask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Unmask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Unmask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Unmask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Unmask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Unmask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Unmask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Unmask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Unmask" "0,1" group.long 0x4++0x3 line.long 0x00 "PINT3_MSK_CLR,PINT3 PINT Mask Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Mask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Mask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Mask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Mask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Mask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Mask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Mask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Mask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Mask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Mask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Mask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Mask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Mask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Mask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Mask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Mask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Mask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Mask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Mask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Mask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Mask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Mask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Mask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Mask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Mask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Mask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Mask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Mask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Mask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Mask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Mask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Mask" "0,1" group.long 0x8++0x3 line.long 0x00 "PINT3_REQ,PINT3 PINT Request Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Request" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Request" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Request" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Request" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Request" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Request" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Request" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Request" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Request" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Request" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Request" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Request" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Request" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Request" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Request" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Request" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Request" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Request" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Request" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Request" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Request" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Request" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Request" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Request" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Request" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Request" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Request" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Request" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Request" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Request" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Request" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Request" "0,1" group.long 0xC++0x3 line.long 0x00 "PINT3_ASSIGN,PINT3 PINT Assign Register" hexmask.long.byte 0x00 24.--31. 1. " B3MAP ,Byte 3 Mapping" hexmask.long.byte 0x00 16.--23. 1. " B2MAP ,Byte 2 Mapping" hexmask.long.byte 0x00 8.--15. 1. " B1MAP ,Byte 1 Mapping" hexmask.long.byte 0x00 0.--7. 1. " B0MAP ,Byte 0 Mapping" group.long 0x10++0x3 line.long 0x00 "PINT3_EDGE_SET,PINT3 PINT Edge Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Edge" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Edge" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Edge" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Edge" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Edge" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Edge" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Edge" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Edge" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Edge" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Edge" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Edge" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Edge" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Edge" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Edge" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Edge" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Edge" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Edge" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Edge" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Edge" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Edge" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Edge" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Edge" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Edge" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Edge" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Edge" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Edge" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Edge" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Edge" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Edge" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Edge" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Edge" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Edge" "0,1" group.long 0x14++0x3 line.long 0x00 "PINT3_EDGE_CLR,PINT3 PINT Edge Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Level" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Level" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Level" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Level" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Level" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Level" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Level" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Level" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Level" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Level" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Level" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Level" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Level" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Level" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Level" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Level" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Level" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Level" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Level" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Level" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Level" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Level" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Level" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Level" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Level" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Level" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Level" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Level" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Level" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Level" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Level" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Level" "0,1" group.long 0x18++0x3 line.long 0x00 "PINT3_INV_SET,PINT3 PINT Invert Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Invert" "0,1" group.long 0x1C++0x3 line.long 0x00 "PINT3_INV_CLR,PINT3 PINT Invert Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 No Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 No Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 No Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 No Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 No Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 No Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 No Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 No Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 No Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 No Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 No Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 No Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 No Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 No Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 No Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 No Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 No Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 No Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 No Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 No Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 No Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 No Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 No Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 No Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 No Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 No Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 No Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 No Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 No Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 No Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 No Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 No Invert" "0,1" group.long 0x20++0x3 line.long 0x00 "PINT3_PINSTATE,PINT3 PINT Pin State Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 State" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 State" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 State" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 State" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 State" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 State" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 State" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 State" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 State" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 State" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 State" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 State" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 State" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 State" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 State" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 State" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 State" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 State" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 State" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 State" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 State" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 State" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 State" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 State" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 State" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 State" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 State" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 State" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 State" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 State" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 State" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 State" "0,1" group.long 0x24++0x3 line.long 0x00 "PINT3_LATCH,PINT3 PINT Latch Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Latch" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Latch" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Latch" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Latch" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Latch" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Latch" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Latch" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Latch" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Latch" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Latch" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Latch" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Latch" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Latch" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Latch" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Latch" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Latch" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Latch" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Latch" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Latch" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Latch" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Latch" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Latch" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Latch" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Latch" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Latch" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Latch" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Latch" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Latch" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Latch" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Latch" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Latch" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Latch" "0,1" tree.end tree "PINT4" base ad:0x31005400 width 16. group.long 0x0++0x3 line.long 0x00 "PINT4_MSK_SET,PINT4 PINT Mask Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Unmask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Unmask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Unmask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Unmask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Unmask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Unmask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Unmask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Unmask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Unmask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Unmask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Unmask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Unmask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Unmask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Unmask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Unmask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Unmask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Unmask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Unmask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Unmask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Unmask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Unmask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Unmask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Unmask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Unmask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Unmask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Unmask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Unmask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Unmask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Unmask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Unmask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Unmask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Unmask" "0,1" group.long 0x4++0x3 line.long 0x00 "PINT4_MSK_CLR,PINT4 PINT Mask Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Mask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Mask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Mask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Mask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Mask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Mask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Mask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Mask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Mask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Mask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Mask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Mask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Mask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Mask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Mask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Mask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Mask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Mask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Mask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Mask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Mask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Mask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Mask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Mask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Mask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Mask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Mask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Mask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Mask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Mask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Mask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Mask" "0,1" group.long 0x8++0x3 line.long 0x00 "PINT4_REQ,PINT4 PINT Request Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Request" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Request" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Request" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Request" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Request" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Request" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Request" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Request" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Request" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Request" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Request" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Request" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Request" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Request" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Request" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Request" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Request" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Request" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Request" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Request" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Request" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Request" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Request" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Request" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Request" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Request" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Request" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Request" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Request" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Request" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Request" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Request" "0,1" group.long 0xC++0x3 line.long 0x00 "PINT4_ASSIGN,PINT4 PINT Assign Register" hexmask.long.byte 0x00 24.--31. 1. " B3MAP ,Byte 3 Mapping" hexmask.long.byte 0x00 16.--23. 1. " B2MAP ,Byte 2 Mapping" hexmask.long.byte 0x00 8.--15. 1. " B1MAP ,Byte 1 Mapping" hexmask.long.byte 0x00 0.--7. 1. " B0MAP ,Byte 0 Mapping" group.long 0x10++0x3 line.long 0x00 "PINT4_EDGE_SET,PINT4 PINT Edge Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Edge" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Edge" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Edge" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Edge" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Edge" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Edge" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Edge" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Edge" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Edge" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Edge" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Edge" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Edge" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Edge" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Edge" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Edge" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Edge" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Edge" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Edge" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Edge" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Edge" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Edge" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Edge" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Edge" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Edge" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Edge" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Edge" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Edge" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Edge" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Edge" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Edge" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Edge" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Edge" "0,1" group.long 0x14++0x3 line.long 0x00 "PINT4_EDGE_CLR,PINT4 PINT Edge Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Level" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Level" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Level" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Level" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Level" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Level" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Level" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Level" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Level" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Level" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Level" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Level" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Level" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Level" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Level" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Level" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Level" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Level" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Level" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Level" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Level" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Level" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Level" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Level" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Level" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Level" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Level" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Level" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Level" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Level" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Level" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Level" "0,1" group.long 0x18++0x3 line.long 0x00 "PINT4_INV_SET,PINT4 PINT Invert Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Invert" "0,1" group.long 0x1C++0x3 line.long 0x00 "PINT4_INV_CLR,PINT4 PINT Invert Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 No Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 No Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 No Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 No Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 No Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 No Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 No Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 No Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 No Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 No Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 No Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 No Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 No Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 No Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 No Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 No Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 No Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 No Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 No Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 No Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 No Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 No Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 No Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 No Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 No Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 No Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 No Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 No Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 No Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 No Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 No Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 No Invert" "0,1" group.long 0x20++0x3 line.long 0x00 "PINT4_PINSTATE,PINT4 PINT Pin State Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 State" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 State" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 State" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 State" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 State" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 State" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 State" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 State" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 State" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 State" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 State" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 State" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 State" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 State" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 State" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 State" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 State" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 State" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 State" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 State" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 State" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 State" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 State" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 State" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 State" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 State" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 State" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 State" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 State" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 State" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 State" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 State" "0,1" group.long 0x24++0x3 line.long 0x00 "PINT4_LATCH,PINT4 PINT Latch Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Latch" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Latch" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Latch" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Latch" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Latch" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Latch" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Latch" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Latch" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Latch" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Latch" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Latch" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Latch" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Latch" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Latch" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Latch" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Latch" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Latch" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Latch" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Latch" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Latch" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Latch" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Latch" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Latch" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Latch" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Latch" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Latch" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Latch" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Latch" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Latch" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Latch" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Latch" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Latch" "0,1" tree.end tree "PINT5" base ad:0x31005500 width 16. group.long 0x0++0x3 line.long 0x00 "PINT5_MSK_SET,PINT5 PINT Mask Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Unmask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Unmask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Unmask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Unmask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Unmask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Unmask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Unmask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Unmask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Unmask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Unmask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Unmask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Unmask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Unmask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Unmask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Unmask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Unmask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Unmask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Unmask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Unmask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Unmask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Unmask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Unmask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Unmask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Unmask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Unmask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Unmask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Unmask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Unmask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Unmask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Unmask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Unmask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Unmask" "0,1" group.long 0x4++0x3 line.long 0x00 "PINT5_MSK_CLR,PINT5 PINT Mask Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Mask" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Mask" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Mask" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Mask" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Mask" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Mask" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Mask" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Mask" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Mask" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Mask" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Mask" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Mask" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Mask" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Mask" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Mask" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Mask" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Mask" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Mask" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Mask" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Mask" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Mask" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Mask" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Mask" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Mask" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Mask" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Mask" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Mask" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Mask" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Mask" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Mask" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Mask" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Mask" "0,1" group.long 0x8++0x3 line.long 0x00 "PINT5_REQ,PINT5 PINT Request Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Request" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Request" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Request" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Request" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Request" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Request" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Request" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Request" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Request" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Request" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Request" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Request" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Request" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Request" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Request" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Request" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Request" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Request" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Request" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Request" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Request" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Request" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Request" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Request" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Request" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Request" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Request" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Request" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Request" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Request" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Request" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Request" "0,1" group.long 0xC++0x3 line.long 0x00 "PINT5_ASSIGN,PINT5 PINT Assign Register" hexmask.long.byte 0x00 24.--31. 1. " B3MAP ,Byte 3 Mapping" hexmask.long.byte 0x00 16.--23. 1. " B2MAP ,Byte 2 Mapping" hexmask.long.byte 0x00 8.--15. 1. " B1MAP ,Byte 1 Mapping" hexmask.long.byte 0x00 0.--7. 1. " B0MAP ,Byte 0 Mapping" group.long 0x10++0x3 line.long 0x00 "PINT5_EDGE_SET,PINT5 PINT Edge Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Edge" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Edge" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Edge" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Edge" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Edge" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Edge" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Edge" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Edge" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Edge" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Edge" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Edge" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Edge" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Edge" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Edge" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Edge" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Edge" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Edge" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Edge" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Edge" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Edge" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Edge" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Edge" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Edge" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Edge" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Edge" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Edge" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Edge" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Edge" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Edge" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Edge" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Edge" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Edge" "0,1" group.long 0x14++0x3 line.long 0x00 "PINT5_EDGE_CLR,PINT5 PINT Edge Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Level" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Level" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Level" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Level" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Level" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Level" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Level" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Level" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Level" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Level" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Level" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Level" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Level" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Level" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Level" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Level" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Level" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Level" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Level" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Level" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Level" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Level" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Level" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Level" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Level" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Level" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Level" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Level" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Level" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Level" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Level" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Level" "0,1" group.long 0x18++0x3 line.long 0x00 "PINT5_INV_SET,PINT5 PINT Invert Set Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Invert" "0,1" group.long 0x1C++0x3 line.long 0x00 "PINT5_INV_CLR,PINT5 PINT Invert Clear Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 No Invert" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 No Invert" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 No Invert" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 No Invert" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 No Invert" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 No Invert" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 No Invert" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 No Invert" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 No Invert" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 No Invert" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 No Invert" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 No Invert" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 No Invert" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 No Invert" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 No Invert" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 No Invert" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 No Invert" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 No Invert" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 No Invert" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 No Invert" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 No Invert" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 No Invert" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 No Invert" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 No Invert" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 No Invert" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 No Invert" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 No Invert" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 No Invert" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 No Invert" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 No Invert" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 No Invert" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 No Invert" "0,1" group.long 0x20++0x3 line.long 0x00 "PINT5_PINSTATE,PINT5 PINT Pin State Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 State" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 State" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 State" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 State" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 State" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 State" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 State" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 State" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 State" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 State" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 State" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 State" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 State" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 State" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 State" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 State" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 State" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 State" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 State" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 State" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 State" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 State" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 State" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 State" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 State" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 State" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 State" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 State" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 State" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 State" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 State" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 State" "0,1" group.long 0x24++0x3 line.long 0x00 "PINT5_LATCH,PINT5 PINT Latch Register" bitfld.long 0x00 31. " PIQ31 ,Pin Interrupt 31 Latch" "0,1" bitfld.long 0x00 30. " PIQ30 ,Pin Interrupt 30 Latch" "0,1" bitfld.long 0x00 29. " PIQ29 ,Pin Interrupt 29 Latch" "0,1" bitfld.long 0x00 28. " PIQ28 ,Pin Interrupt 28 Latch" "0,1" newline bitfld.long 0x00 27. " PIQ27 ,Pin Interrupt 27 Latch" "0,1" bitfld.long 0x00 26. " PIQ26 ,Pin Interrupt 26 Latch" "0,1" bitfld.long 0x00 25. " PIQ25 ,Pin Interrupt 25 Latch" "0,1" bitfld.long 0x00 24. " PIQ24 ,Pin Interrupt 24 Latch" "0,1" newline bitfld.long 0x00 23. " PIQ23 ,Pin Interrupt 23 Latch" "0,1" bitfld.long 0x00 22. " PIQ22 ,Pin Interrupt 22 Latch" "0,1" bitfld.long 0x00 21. " PIQ21 ,Pin Interrupt 21 Latch" "0,1" bitfld.long 0x00 20. " PIQ20 ,Pin Interrupt 20 Latch" "0,1" newline bitfld.long 0x00 19. " PIQ19 ,Pin Interrupt 19 Latch" "0,1" bitfld.long 0x00 18. " PIQ18 ,Pin Interrupt 18 Latch" "0,1" bitfld.long 0x00 17. " PIQ17 ,Pin Interrupt 17 Latch" "0,1" bitfld.long 0x00 16. " PIQ16 ,Pin Interrupt 16 Latch" "0,1" newline bitfld.long 0x00 15. " PIQ15 ,Pin Interrupt 15 Latch" "0,1" bitfld.long 0x00 14. " PIQ14 ,Pin Interrupt 14 Latch" "0,1" bitfld.long 0x00 13. " PIQ13 ,Pin Interrupt 13 Latch" "0,1" bitfld.long 0x00 12. " PIQ12 ,Pin Interrupt 12 Latch" "0,1" newline bitfld.long 0x00 11. " PIQ11 ,Pin Interrupt 11 Latch" "0,1" bitfld.long 0x00 10. " PIQ10 ,Pin Interrupt 10 Latch" "0,1" bitfld.long 0x00 9. " PIQ9 ,Pin Interrupt 9 Latch" "0,1" bitfld.long 0x00 8. " PIQ8 ,Pin Interrupt 8 Latch" "0,1" newline bitfld.long 0x00 7. " PIQ7 ,Pin Interrupt 7 Latch" "0,1" bitfld.long 0x00 6. " PIQ6 ,Pin Interrupt 6 Latch" "0,1" bitfld.long 0x00 5. " PIQ5 ,Pin Interrupt 5 Latch" "0,1" bitfld.long 0x00 4. " PIQ4 ,Pin Interrupt 4 Latch" "0,1" newline bitfld.long 0x00 3. " PIQ3 ,Pin Interrupt 3 Latch" "0,1" bitfld.long 0x00 2. " PIQ2 ,Pin Interrupt 2 Latch" "0,1" bitfld.long 0x00 1. " PIQ1 ,Pin Interrupt 1 Latch" "0,1" bitfld.long 0x00 0. " PIQ0 ,Pin Interrupt 0 Latch" "0,1" tree.end tree.end tree "PKA (Public Key Accelerator)" base ad:0x310D4000 width 16. group.long 0x0++0x3 line.long 0x00 "PKA0_APTR,PKA0 PKA Vector_A Address" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Pointer to Vector A" group.long 0x4++0x3 line.long 0x00 "PKA0_BPTR,PKA0 PKA Vector_B Address" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Pointer to Vector B" group.long 0x8++0x3 line.long 0x00 "PKA0_CPTR,PKA0 PKA Vector_C Address" hexmask.long.word 0x00 0.--10. 1. " CPTR ,Pointer to Vector C" group.long 0xC++0x3 line.long 0x00 "PKA0_DPTR,PKA0 PKA Vector_D Address" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Pointer to Vector D" group.long 0x10++0x3 line.long 0x00 "PKA0_ALEN,PKA0 PKA Vector_A Length" hexmask.long.word 0x00 0.--8. 1. " VALUE ,Length of Vector A" group.long 0x14++0x3 line.long 0x00 "PKA0_BLEN,PKA0 PKA Vector_B Length" hexmask.long.word 0x00 0.--8. 1. " VALUE ,Length of Vector B" group.long 0x18++0x3 line.long 0x00 "PKA0_SHIFT,PKA0 PKA Bit Shift Value" bitfld.long 0x00 0.--4. " VALUE ,Bits to Shift" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.long 0x1C++0x3 line.long 0x00 "PKA0_FUNC,PKA0 PKA Function" bitfld.long 0x00 24. " STALLRSLT ,Stall Result" "0,1" bitfld.long 0x00 15. " RUN ,Run" "0,1" bitfld.long 0x00 12.--14. " SEQOPS ,Sequencer Operation Select" "0,1,2,3,4,5,6,7" bitfld.long 0x00 11. " CPY ,Copy" "0,1" newline bitfld.long 0x00 10. " CMP ,Perform Compare Operation" "0,1" bitfld.long 0x00 9. " MODULO ,Perform Modulo Operation" "0,1" bitfld.long 0x00 8. " DIV ,Perform Divide Operation" "0,1" bitfld.long 0x00 7. " LSHFT ,Perform Left Shift Operation" "0,1" newline bitfld.long 0x00 6. " RSHFT ,Perform Right Shift Operation" "0,1" bitfld.long 0x00 5. " SUB ,Perform Subtract Operation" "0,1" bitfld.long 0x00 4. " ADD ,Perform Add Operation" "0,1" bitfld.long 0x00 3. " MSONE ,Most Significant One" "0,1" newline bitfld.long 0x00 1. " ADDSUB ,Perform Combined Add/Subtract Operation" "0,1" bitfld.long 0x00 0. " MULT ,Perform Multiply Operation" "0,1" group.long 0x20++0x3 line.long 0x00 "PKA0_COMPARE,PKA0 PKA Compare Result" bitfld.long 0x00 2. " AGTB ,Vector A is Greater Than Vector B" "0,1" bitfld.long 0x00 1. " ALTB ,Vector A is Less Than Vector B" "0,1" bitfld.long 0x00 0. " AEQB ,Vector A is equal to Vector B" "0,1" group.long 0x24++0x3 line.long 0x00 "PKA0_RESULTMSW,PKA0 PKA Most-Significant-Word of Result Vector" bitfld.long 0x00 15. " ZERO ,Result Is Zero" "0,1" hexmask.long.word 0x00 0.--10. 1. " ADDR ,Address of Most-significant Nonzero Word" group.long 0x28++0x3 line.long 0x00 "PKA0_DIVMSW,PKA0 PKA Most-Significant-Word of Divide Remainder" bitfld.long 0x00 15. " ZERO ,Remainder Result Vector is Zeros" "0,1" hexmask.long.word 0x00 0.--10. 1. " ADDR ,Address of Most-significant Nonzero Word" group.long 0x2000++0x3 line.long 0x00 "PKA0_RAM,PKA0 Start of PKA RAM space" tree.end tree "PKIC (Public Key Interrupt Controller)" base ad:0x310D8000 width 16. group.long 0x0++0x3 line.long 0x00 "PKIC0_POL_CTL,PKIC0 Polarity Control Register" bitfld.long 0x00 5. " SLERRINT ,Slave Error IRQ" "0,1" bitfld.long 0x00 3. " TRNGINT ,TRNG IRQ" "0,1" bitfld.long 0x00 1. " PKAINT1 ,PKA Completion IRQ" "0,1" group.long 0x4++0x3 line.long 0x00 "PKIC0_TYPE_CTL,PKIC0 Type Control Register" bitfld.long 0x00 5. " SLERRINT ,Slave Error IRQ" "0,1" bitfld.long 0x00 3. " TRNGINT ,TRNG IRQ" "0,1" bitfld.long 0x00 1. " PKAINT1 ,PKA Completion IRQ" "0,1" group.long 0x8++0x3 line.long 0x00 "PKIC0_EN_CTL,PKIC0 Enable Control Register" bitfld.long 0x00 5. " SLERRINT ,Slave Error IRQ" "0,1" bitfld.long 0x00 3. " TRNGINT ,TRNG IRQ" "0,1" bitfld.long 0x00 1. " PKAINT1 ,PKA Completion IRQ" "0,1" group.long 0xC++0x3 line.long 0x00 "PKIC0_RAW_STAT,PKIC0 Raw Status Register" bitfld.long 0x00 5. " SLERRINT ,Slave Error IRQ" "0,1" bitfld.long 0x00 3. " TRNGINT ,TRNG IRQ" "0,1" bitfld.long 0x00 1. " PKAINT1 ,PKA Completion IRQ" "0,1" group.long 0xC++0x3 line.long 0x00 "PKIC0_EN_SET,PKIC0 Enable Set Register" bitfld.long 0x00 5. " SLERRINT ,Slave Error IRQ" "0,1" bitfld.long 0x00 3. " TRNGINT ,TRNG IRQ" "0,1" bitfld.long 0x00 1. " PKAINT1 ,PKA Completion IRQ" "0,1" group.long 0x10++0x3 line.long 0x00 "PKIC0_ACK,PKIC0 Acknowledge Register" bitfld.long 0x00 5. " SLERRINT ,Slave Error IRQ" "0,1" bitfld.long 0x00 3. " TRNGINT ,TRNG IRQ" "0,1" bitfld.long 0x00 1. " PKAINT1 ,PKA Completion IRQ" "0,1" group.long 0x10++0x3 line.long 0x00 "PKIC0_EN_STAT,PKIC0 Enabled Status Register" bitfld.long 0x00 5. " SLERRINT ,Slave Error IRQ" "0,1" bitfld.long 0x00 3. " TRNGINT ,TRNG IRQ" "0,1" bitfld.long 0x00 1. " PKAINT1 ,PKA Completion IRQ" "0,1" group.long 0x14++0x3 line.long 0x00 "PKIC0_EN_CLR,PKIC0 Enable Clear Register" bitfld.long 0x00 5. " SLERRINT ,Slave Error IRQ" "0,1" bitfld.long 0x00 3. " TRNGINT ,TRNG IRQ" "0,1" bitfld.long 0x00 1. " PKAINT1 ,PKA Completion IRQ" "0,1" tree.end tree "PKTE (Security Packet Engine)" base ad:0x310CD000 width 23. group.long 0x0++0x3 line.long 0x00 "PKTE0_CTL_STAT,PKTE0 Packet Engine Control Register" hexmask.long.byte 0x00 24.--31. 1. " PADCTLSTAT ,Pad Control/Pad Status" bitfld.long 0x00 20.--23. " EXTERRCD ,Extended Error Code" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 19. " EXTERR ,Extended Error" "0,1" bitfld.long 0x00 18. " SQNMERR ,Sequence Number Error" "0,1" newline bitfld.long 0x00 17. " PADERR ,Pad Error" "0,1" bitfld.long 0x00 16. " AUTHERR ,Authentication Error" "0,1" hexmask.long.byte 0x00 8.--15. 1. " PADVAL ,Pad Value" bitfld.long 0x00 6.--7. " PRNGMD ,PRNG Mode" "0,1,2,3" newline bitfld.long 0x00 4. " HASHFINAL ,Hash Final" "0,1" bitfld.long 0x00 3. " INITARC4 ,Init ARC4" "0,1" bitfld.long 0x00 1. " PERDY ,Packet Engine Ready" "0,1" bitfld.long 0x00 0. " HOSTRDY ,Host Ready" "0,1" group.long 0x4++0x3 line.long 0x00 "PKTE0_SRC_ADDR,PKTE0 Packet Engine Source Address" group.long 0x8++0x3 line.long 0x00 "PKTE0_DEST_ADDR,PKTE0 Packet Engine Destination Address" group.long 0xC++0x3 line.long 0x00 "PKTE0_SA_ADDR,PKTE0 Packet Engine SA Address" group.long 0x10++0x3 line.long 0x00 "PKTE0_STATE_ADDR,PKTE0 Packet Engine State Record Address" group.long 0x14++0x3 line.long 0x00 "PKTE0_ARC4STATE_ADDR,PKTE0 Packet Engine ARC4 State Record Address" group.long 0x18++0x3 line.long 0x00 "PKTE0_USERID,PKTE0 Packet Engine User ID" group.long 0x1C++0x3 line.long 0x00 "PKTE0_LEN,PKTE0 Packet Engine Length Register" hexmask.long.byte 0x00 24.--31. 1. " BYPASS ,Bypass" bitfld.long 0x00 23. " PEDONE ,PE Done" "0,1" bitfld.long 0x00 22. " HSTRDY ,Host Ready" "0,1" hexmask.long.tbyte 0x00 0.--19. 1. " TOTLEN ,Total length" group.long 0x80++0x3 line.long 0x00 "PKTE0_CDRBASE_ADDR,PKTE0 Packet Engine Command Descriptor Ring Base Address" group.long 0x84++0x3 line.long 0x00 "PKTE0_RDRBASE_ADDR,PKTE0 Packet Engine Result Descriptor Ring Base Address" group.long 0x88++0x3 line.long 0x00 "PKTE0_RING_CFG,PKTE0 Packet Engine Ring Configuration" bitfld.long 0x00 31. " ENEXTTRIG ,Enable External Trigger" "0,1" hexmask.long.word 0x00 0.--9. 1. " RINGSZ ,Ring Size" group.long 0x8C++0x3 line.long 0x00 "PKTE0_RING_THRESH,PKTE0 Packet Engine Ring Threshold Registers" bitfld.long 0x00 31. " TOEN ,Timeout Enable" "0,1" bitfld.long 0x00 26.--29. " RDTO ,Read Descriptor Timeout" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 16.--25. 1. " RDRTHRSH ,Result Descriptor Ring Threshold" hexmask.long.word 0x00 0.--9. 1. " CDRTHRSH ,Command Descriptor Ring Threshold" group.long 0x90++0x3 line.long 0x00 "PKTE0_CDSC_INCR,PKTE0 Packet Engine Command Descriptor Count Increment Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Command Descriptor Count Increment" group.long 0x90++0x3 line.long 0x00 "PKTE0_CDSC_CNT,PKTE0 Packet Engine Command Descriptor Count Register" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Command Descriptor Count" group.long 0x94++0x3 line.long 0x00 "PKTE0_RDSC_DECR,PKTE0 Packet Engine Result Descriptor Count Decrement Registers" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Read Count Decrement" group.long 0x94++0x3 line.long 0x00 "PKTE0_RDSC_CNT,PKTE0 Packet Engine Result Descriptor Count Registers" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Result Descriptor Count" group.long 0x98++0x3 line.long 0x00 "PKTE0_RING_PTR,PKTE0 Packet Engine Ring Pointer Status" hexmask.long.word 0x00 16.--25. 1. " RDRPTR ,Result Descriptor Ring Write Pointer" hexmask.long.word 0x00 0.--9. 1. " CDRPTR ,Command Descriptor Ring Read Pointer" group.long 0x9C++0x3 line.long 0x00 "PKTE0_RING_STAT,PKTE0 Packet Engine Ring Status" bitfld.long 0x00 1. " RDRUNFL ,Result Descriptor Ring Underflow" "0,1" bitfld.long 0x00 0. " CDROVFL ,Command Descriptor Ring Overflow" "0,1" group.long 0x100++0x3 line.long 0x00 "PKTE0_CFG,PKTE0 Packet Engine Configuration Register" bitfld.long 0x00 18. " SWPDAT ,Swap Data" "0,1" bitfld.long 0x00 17. " SWPSA ,Swap SA" "0,1" bitfld.long 0x00 16. " SWPCDRD ,Swap CD RD" "0,1" bitfld.long 0x00 10. " ENCDRUPDT ,Enable CDR Update" "0,1" newline bitfld.long 0x00 8.--9. " MODE ,Packet Engine Mode" "0,1,2,3" bitfld.long 0x00 1. " RSTRING ,Reset Ring" "0,1" bitfld.long 0x00 0. " RSTPE ,Reset Packet Engine" "0,1" group.long 0x104++0x3 line.long 0x00 "PKTE0_STAT,PKTE0 Packet Engine Status Register" hexmask.long.word 0x00 22.--31. 1. " OBUFFULLCNT ,Output Buffer Full Count" hexmask.long.word 0x00 12.--21. 1. " IBUFEMPTYCNT ,Input Buffer Empty Count" bitfld.long 0x00 11. " OBUFREQ ,Output Buffer Request Active" "0,1" bitfld.long 0x00 10. " IBUFREQ ,Input Buffer Request Active" "0,1" newline bitfld.long 0x00 9. " OPDN ,Operation Done" "0,1" bitfld.long 0x00 8. " EXTERR ,Extended Error" "0,1" bitfld.long 0x00 7. " SNUMERR ,Sequence Number Error" "0,1" bitfld.long 0x00 6. " PADERR ,Pad Error" "0,1" newline bitfld.long 0x00 5. " AUTHERR ,Authentication Error" "0,1" bitfld.long 0x00 4. " OUTHSHDN ,Outer Hash Done" "0,1" bitfld.long 0x00 3. " INHSHDN ,Inner Hash Done" "0,1" bitfld.long 0x00 2. " ENCRYPTDN ,Encrypt Done" "0,1" newline bitfld.long 0x00 1. " OUTPTDN ,PE Output Done" "0,1" bitfld.long 0x00 0. " INPTDN ,Packet Engine Input Done" "0,1" group.long 0x10C++0x3 line.long 0x00 "PKTE0_BUF_THRESH,PKTE0 Packet Engine Buffer Threshold Register" hexmask.long.byte 0x00 16.--23. 1. " OUTBUF ,Output Buffer Threshold" hexmask.long.byte 0x00 0.--7. 1. " INBUF ,Input Buffer Threshold" group.long 0x110++0x3 line.long 0x00 "PKTE0_INBUF_CNT,PKTE0 Packet Engine Input Buffer Count Register" hexmask.long.word 0x00 0.--8. 1. " VALUE ,Input Buffer Count" group.long 0x110++0x3 line.long 0x00 "PKTE0_INBUF_INCR,PKTE0 Packet Engine Input Buffer Count Increment Register" hexmask.long.word 0x00 0.--8. 1. " VALUE ,Input Buffer Increment" group.long 0x114++0x3 line.long 0x00 "PKTE0_OUTBUF_DECR,PKTE0 Packet Engine Output Buffer Count Decrement Register" hexmask.long.word 0x00 0.--8. 1. " VALUE ,Output Buffer Count Decrement" group.long 0x114++0x3 line.long 0x00 "PKTE0_OUTBUF_CNT,PKTE0 Packet Engine Output Buffer Count Register" hexmask.long.word 0x00 0.--8. 1. " VALUE ,Output Buffer Count" group.long 0x118++0x3 line.long 0x00 "PKTE0_BUF_PTR,PKTE0 Packet Engine Buffer Pointer Register" hexmask.long.byte 0x00 16.--23. 1. " OUTBUF ,Output Buffer Pointer" hexmask.long.byte 0x00 0.--7. 1. " INBUF ,Input Buffer Pointer" group.long 0x120++0x3 line.long 0x00 "PKTE0_DMA_CFG,PKTE0 Packet Engine DMA Configuration Register" bitfld.long 0x00 20. " IDLE ,Idle Enable" "0,1" bitfld.long 0x00 19. " INCR ,Increment Enable" "0,1" bitfld.long 0x00 16. " MSTRBIGEND ,Master Big Endian" "0,1" bitfld.long 0x00 0.--3. " MXBRSTSZ ,Max Burst Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1D0++0x3 line.long 0x00 "PKTE0_ENDIAN_CFG,PKTE0 Packet Engine Endian Configuration Register" hexmask.long.byte 0x00 16.--23. 1. " TGTBSWP ,Target Byte Swap" hexmask.long.byte 0x00 0.--7. 1. " MSTRBSWP ,Master Byte Swap" group.long 0x1E0++0x3 line.long 0x00 "PKTE0_HLT_STAT,PKTE0 Packet Engine Halt Status Register" bitfld.long 0x00 24.--26. " DATSTATE ,Data State" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20.--23. " RDSASTATE ,Read SA State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " MNSTATE ,Main State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 5. " WRRD ,Halt On Write Result Descriptor" "0,1" newline bitfld.long 0x00 4. " WRSA ,Halt On Write SA" "0,1" bitfld.long 0x00 3. " WRDAT ,Halt On Write Data" "0,1" bitfld.long 0x00 2. " RDSA ,Halt On Read SA" "0,1" bitfld.long 0x00 1. " RDCD ,Halt On Read Command Descriptor" "0,1" newline bitfld.long 0x00 0. " EN ,Halt Mode Enabled Status" "0,1" group.long 0x1E0++0x3 line.long 0x00 "PKTE0_HLT_CTL,PKTE0 Packet Engine Halt Control Register" bitfld.long 0x00 5. " WRRD ,Halt On Write Result Descriptor" "0,1" bitfld.long 0x00 4. " WRSA ,Halt On Write SA" "0,1" bitfld.long 0x00 3. " HWRDAT ,Halt On Write Data" "0,1" bitfld.long 0x00 2. " RDSA ,Halt On Read SA" "0,1" newline bitfld.long 0x00 1. " RDCD ,Halt On Read Command Descriptor" "0,1" bitfld.long 0x00 0. " EN ,Enable Halt Mode" "0,1" group.long 0x1E4++0x3 line.long 0x00 "PKTE0_CONT,PKTE0 PKTE Continue Register" group.long 0x1E8++0x3 line.long 0x00 "PKTE0_CLK_CTL,PKTE0 PE Clock Control Register" bitfld.long 0x00 4. " ENHSHCLK ,Enable Hash Clock" "0,1" bitfld.long 0x00 3. " ENARC4CLK ,Enable ARC4 Clock" "0,1" bitfld.long 0x00 2. " ENAESCLK ,Enable AES Clock" "0,1" bitfld.long 0x00 1. " ENDESCLK ,Enable DES Clock" "0,1" newline bitfld.long 0x00 0. " ENPECLK ,Enable Packet Engine Clock" "0,1" group.long 0x200++0x3 line.long 0x00 "PKTE0_IUMSK_STAT,PKTE0 Interrupt Unmasked Status Register" bitfld.long 0x00 18. " IFERR ,Interface Error" "0,1" bitfld.long 0x00 17. " PROCERR ,PKTE Processing Error" "0,1" bitfld.long 0x00 16. " RINGERR ,PKTE Ring Error" "0,1" bitfld.long 0x00 15. " HLT ,Halt" "0,1" newline bitfld.long 0x00 11. " OBUFTHRSH ,Output Buffer Threshold" "0,1" bitfld.long 0x00 10. " IBUFTHRSH ,Input Buffer Threshold" "0,1" bitfld.long 0x00 9. " OPDN ,Operation Done" "0,1" bitfld.long 0x00 1. " RDRTHRSH ,RDR Threshold" "0,1" newline bitfld.long 0x00 0. " CDRTHRSH ,CDR Threshold" "0,1" group.long 0x204++0x3 line.long 0x00 "PKTE0_IMSK_STAT,PKTE0 Interrupt Masked Status Register" bitfld.long 0x00 18. " IFERR ,Interface Error" "0,1" bitfld.long 0x00 17. " PROCERR ,PKTE Processing Error" "0,1" bitfld.long 0x00 16. " RINGERR ,PE Ring Error" "0,1" bitfld.long 0x00 15. " HLT ,Halt" "0,1" newline bitfld.long 0x00 11. " OBUFTHRSH ,Output Buffer Threshold" "0,1" bitfld.long 0x00 10. " IBUFTHRSH ,Input Buffer Threshold" "0,1" bitfld.long 0x00 9. " OPDN ,Operation Done" "0,1" bitfld.long 0x00 1. " RDRTHRSH ,RDR Threshold" "0,1" newline bitfld.long 0x00 0. " CDRTHRSH ,CDR Threshold" "0,1" group.long 0x204++0x3 line.long 0x00 "PKTE0_INT_CLR,PKTE0 Interrupt Clear Register" bitfld.long 0x00 18. " IFERR ,Interface Error" "0,1" bitfld.long 0x00 17. " PROCERR ,PKTE Processing Error" "0,1" bitfld.long 0x00 16. " RINGERR ,PKTE Ring Error" "0,1" bitfld.long 0x00 15. " HLT ,Halt" "0,1" newline bitfld.long 0x00 11. " OBUFTHRSH ,Output Buffer Threshold" "0,1" bitfld.long 0x00 10. " IBUFTHRSH ,Input Buffer Threshold" "0,1" bitfld.long 0x00 9. " OPDN ,Operation Done" "0,1" bitfld.long 0x00 1. " RDRTHRSH ,RDR Threshold" "0,1" newline bitfld.long 0x00 0. " CDRTHRSH ,CDR Threshold" "0,1" group.long 0x208++0x3 line.long 0x00 "PKTE0_INT_EN,PKTE0 Interrupt Enable Register" bitfld.long 0x00 18. " IFERR ,Interface Error" "0,1" bitfld.long 0x00 17. " PROCERR ,PKTE Processing Error" "0,1" bitfld.long 0x00 16. " RINGERR ,PKTE Ring Error" "0,1" bitfld.long 0x00 15. " HLT ,Halt" "0,1" newline bitfld.long 0x00 11. " OBUFTHRSH ,Output Buffer Threshold" "0,1" bitfld.long 0x00 10. " IBUFTHRSH ,Input Buffer Threshold" "0,1" bitfld.long 0x00 9. " OPDN ,Operation Done" "0,1" bitfld.long 0x00 1. " RDRTHRSH ,RDR Threshold" "0,1" newline bitfld.long 0x00 0. " CDRTHRSH ,CDR Threshold" "0,1" group.long 0x20C++0x3 line.long 0x00 "PKTE0_INT_CFG,PKTE0 Interrupt Configuration Register" bitfld.long 0x00 1. " PULSECLR ,Clear After Pulse Interrupt" "0,1" bitfld.long 0x00 0. " TYPE ,Interrupt Type" "0,1" group.long 0x210++0x3 line.long 0x00 "PKTE0_IMSK_EN,PKTE0 Interrupt Mask Enable Register" bitfld.long 0x00 18. " IFERR ,Interface Error" "0,1" bitfld.long 0x00 17. " PROCERR ,PKTE Processing Error" "0,1" bitfld.long 0x00 16. " RINGERR ,PKTE Ring Error" "0,1" bitfld.long 0x00 15. " HLT ,Halt" "0,1" newline bitfld.long 0x00 11. " OBUFTHRSH ,Output Buffer Threshold" "0,1" bitfld.long 0x00 10. " IBUFTHRSH ,Input Buffer Threshold" "0,1" bitfld.long 0x00 9. " OPDN ,Operation Done" "0,1" bitfld.long 0x00 1. " RDRTHRSH ,RDR Threshold" "0,1" newline bitfld.long 0x00 0. " CDRTHRSH ,CDR Threshold" "0,1" group.long 0x214++0x3 line.long 0x00 "PKTE0_IMSK_DIS,PKTE0 Interrupt Mask Disable Register" bitfld.long 0x00 18. " IFERR ,Interface Error" "0,1" bitfld.long 0x00 17. " PROCERR ,PKTE Processing Error" "0,1" bitfld.long 0x00 16. " RINGERR ,PKTE Ring Error" "0,1" bitfld.long 0x00 15. " HLT ,Halt" "0,1" newline bitfld.long 0x00 11. " OBUFTHRSH ,Output Buffer Threshold" "0,1" bitfld.long 0x00 10. " IBUFTHRSH ,Input Buffer Threshold" "0,1" bitfld.long 0x00 9. " OPDN ,Operation Done" "0,1" bitfld.long 0x00 1. " RDRTHRSH ,RDR Threshold" "0,1" newline bitfld.long 0x00 0. " CDRTHRSH ,CDR Threshold" "0,1" group.long 0x400++0x3 line.long 0x00 "PKTE0_SA_CMD0,PKTE0 SA Command 0" bitfld.long 0x00 29. " SVHASH ,Save Hash" "0,1" bitfld.long 0x00 28. " SVIV ,Save IV" "0,1" bitfld.long 0x00 26.--27. " HASHSRC ,Hash Source" "0,1,2,3" bitfld.long 0x00 24.--25. " IVSRC ,IV Source" "0,1,2,3" newline bitfld.long 0x00 20.--23. " DIGESTLEN ,Digest Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 19. " HDRPROC ,Header Processing" "0,1" bitfld.long 0x00 18. " EXTPAD ,Extended Pad" "0,1" bitfld.long 0x00 17. " SCPAD ,Stream Cipher Padding" "0,1" newline bitfld.long 0x00 12.--15. " HASH ,Hash Algorithm Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " CIPHER ,Cipher Algorithm Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 6.--7. " PADTYPE ,Pad Type" "0,1,2,3" bitfld.long 0x00 4.--5. " OPGRP ,Operation Group" "0,1,2,3" newline bitfld.long 0x00 3. " DIR ,Direction" "0,1" bitfld.long 0x00 0.--2. " OPCD ,Operation Code" "0,1,2,3,4,5,6,7" group.long 0x404++0x3 line.long 0x00 "PKTE0_SA_CMD1,PKTE0 SA Command 1" bitfld.long 0x00 29. " ENSQNCHK ,Sequence Number Check Enable" "0,1" bitfld.long 0x00 24.--28. " ARC4KEYLEN ,ARC4 Key Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 28. " AESDECKEY ,AES Dec Key" "0,1" bitfld.long 0x00 24.--26. " AESKEYLEN ,AES Key Length" "0,1,2,3,4,5,6,7" newline hexmask.long.byte 0x00 16.--23. 1. " HSHCOFFST ,Hash Crypt Offset" bitfld.long 0x00 13. " BYTEOFFST ,Byte Offset" "0,1" bitfld.long 0x00 12. " HMAC ,Keyed-Hash SSL Message Authentication Code" "0,1" bitfld.long 0x00 11. " SSLMAC ,Ssl Mac" "0,1" newline bitfld.long 0x00 8.--9. " CIPHERMD ,Cipher Mode" "0,1,2,3" bitfld.long 0x00 3. " CPYPAD ,Copy Pad" "0,1" bitfld.long 0x00 2. " CPYPAYLD ,Copy Payload" "0,1" bitfld.long 0x00 1. " CPYHDR ,Copy Header" "0,1" newline bitfld.long 0x00 0. " CPYDGST ,Copy Digest" "0,1" group.long 0x408++0x3 line.long 0x00 "PKTE0_SA_KEY0,PKTE0 SA Key Registers" group.long 0x40C++0x3 line.long 0x00 "PKTE0_SA_KEY1,PKTE0 SA Key Registers" group.long 0x410++0x3 line.long 0x00 "PKTE0_SA_KEY2,PKTE0 SA Key Registers" group.long 0x414++0x3 line.long 0x00 "PKTE0_SA_KEY3,PKTE0 SA Key Registers" group.long 0x418++0x3 line.long 0x00 "PKTE0_SA_KEY4,PKTE0 SA Key Registers" group.long 0x41C++0x3 line.long 0x00 "PKTE0_SA_KEY5,PKTE0 SA Key Registers" group.long 0x420++0x3 line.long 0x00 "PKTE0_SA_KEY6,PKTE0 SA Key Registers" group.long 0x424++0x3 line.long 0x00 "PKTE0_SA_KEY7,PKTE0 SA Key Registers" group.long 0x428++0x3 line.long 0x00 "PKTE0_SA_IDIGEST0,PKTE0 SA Inner Hash Digest Registers" group.long 0x42C++0x3 line.long 0x00 "PKTE0_SA_IDIGEST1,PKTE0 SA Inner Hash Digest Registers" group.long 0x430++0x3 line.long 0x00 "PKTE0_SA_IDIGEST2,PKTE0 SA Inner Hash Digest Registers" group.long 0x434++0x3 line.long 0x00 "PKTE0_SA_IDIGEST3,PKTE0 SA Inner Hash Digest Registers" group.long 0x438++0x3 line.long 0x00 "PKTE0_SA_IDIGEST4,PKTE0 SA Inner Hash Digest Registers" group.long 0x43C++0x3 line.long 0x00 "PKTE0_SA_IDIGEST5,PKTE0 SA Inner Hash Digest Registers" group.long 0x440++0x3 line.long 0x00 "PKTE0_SA_IDIGEST6,PKTE0 SA Inner Hash Digest Registers" group.long 0x444++0x3 line.long 0x00 "PKTE0_SA_IDIGEST7,PKTE0 SA Inner Hash Digest Registers" group.long 0x448++0x3 line.long 0x00 "PKTE0_SA_ODIGEST0,PKTE0 SA Outer Hash Digest Registers" group.long 0x44C++0x3 line.long 0x00 "PKTE0_SA_ODIGEST1,PKTE0 SA Outer Hash Digest Registers" group.long 0x450++0x3 line.long 0x00 "PKTE0_SA_ODIGEST2,PKTE0 SA Outer Hash Digest Registers" group.long 0x454++0x3 line.long 0x00 "PKTE0_SA_ODIGEST3,PKTE0 SA Outer Hash Digest Registers" group.long 0x458++0x3 line.long 0x00 "PKTE0_SA_ODIGEST4,PKTE0 SA Outer Hash Digest Registers" group.long 0x45C++0x3 line.long 0x00 "PKTE0_SA_ODIGEST5,PKTE0 SA Outer Hash Digest Registers" group.long 0x460++0x3 line.long 0x00 "PKTE0_SA_ODIGEST6,PKTE0 SA Outer Hash Digest Registers" group.long 0x464++0x3 line.long 0x00 "PKTE0_SA_ODIGEST7,PKTE0 SA Outer Hash Digest Registers" group.long 0x468++0x3 line.long 0x00 "PKTE0_SA_SPI,PKTE0 SA SPI Register" group.long 0x46C++0x3 line.long 0x00 "PKTE0_SA_SEQNUM0,PKTE0 SA Sequence Number Register" group.long 0x470++0x3 line.long 0x00 "PKTE0_SA_SEQNUM1,PKTE0 SA Sequence Number Register" group.long 0x474++0x3 line.long 0x00 "PKTE0_SA_SEQNUM_MSK0,PKTE0 SA Sequence Number Mask Registers" group.long 0x478++0x3 line.long 0x00 "PKTE0_SA_SEQNUM_MSK1,PKTE0 SA Sequence Number Mask Registers" group.long 0x47C++0x3 line.long 0x00 "PKTE0_SA_RDY,PKTE0 SA Ready Indicator" group.long 0x47C++0x3 line.long 0x00 "PKTE0_SA_ARC4IJPTR,PKTE0 ARC4 i and j Pointer Register" hexmask.long.byte 0x00 8.--15. 1. " JPTR ,J Pointer" hexmask.long.byte 0x00 0.--7. 1. " IPTR ,I Pointer" group.long 0x47C++0x3 line.long 0x00 "PKTE0_SA_NONCE,PKTE0 SA Initialization Vector Register" group.long 0x500++0x3 line.long 0x00 "PKTE0_STATE_IV0,PKTE0 State Initialization Vector Registers" group.long 0x504++0x3 line.long 0x00 "PKTE0_STATE_IV1,PKTE0 State Initialization Vector Registers" group.long 0x508++0x3 line.long 0x00 "PKTE0_STATE_IV2,PKTE0 State Initialization Vector Registers" group.long 0x50C++0x3 line.long 0x00 "PKTE0_STATE_IV3,PKTE0 State Initialization Vector Registers" group.long 0x510++0x3 line.long 0x00 "PKTE0_STATE_BYTE_CNT0,PKTE0 State Hash Byte Count Registers" group.long 0x514++0x3 line.long 0x00 "PKTE0_STATE_BYTE_CNT1,PKTE0 State Hash Byte Count Registers" group.long 0x518++0x3 line.long 0x00 "PKTE0_STATE_IDIGEST0,PKTE0 State Inner Digest Registers" group.long 0x51C++0x3 line.long 0x00 "PKTE0_STATE_IDIGEST1,PKTE0 State Inner Digest Registers" group.long 0x520++0x3 line.long 0x00 "PKTE0_STATE_IDIGEST2,PKTE0 State Inner Digest Registers" group.long 0x524++0x3 line.long 0x00 "PKTE0_STATE_IDIGEST3,PKTE0 State Inner Digest Registers" group.long 0x528++0x3 line.long 0x00 "PKTE0_STATE_IDIGEST4,PKTE0 State Inner Digest Registers" group.long 0x52C++0x3 line.long 0x00 "PKTE0_STATE_IDIGEST5,PKTE0 State Inner Digest Registers" group.long 0x530++0x3 line.long 0x00 "PKTE0_STATE_IDIGEST6,PKTE0 State Inner Digest Registers" group.long 0x534++0x3 line.long 0x00 "PKTE0_STATE_IDIGEST7,PKTE0 State Inner Digest Registers" group.long 0x700++0x3 line.long 0x00 "PKTE0_ARC4STATE_BUF,PKTE0 Starting Entry of 256-byte ARC4 State Buffer" group.long 0x800++0x3 line.long 0x00 "PKTE0_DATAIO_BUF,PKTE0 Starting Entry of 256-byte Data Input/Output Buffer" tree.end tree "PORT (General-Purpose Ports)" tree "PORTA" base ad:0x31004000 width 16. group.long 0x0++0x3 line.long 0x00 "PORTA_FER,PORTA Port x Function Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "PORTA_FER_SET,PORTA Port x Function Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Set" "0,1" group.long 0x8++0x3 line.long 0x00 "PORTA_FER_CLR,PORTA Port x Function Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Clear" "0,1" group.long 0xC++0x3 line.long 0x00 "PORTA_DATA,PORTA Port x GPIO Data Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data" "0,1" group.long 0x10++0x3 line.long 0x00 "PORTA_DATA_SET,PORTA Port x GPIO Data Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Set" "0,1" group.long 0x14++0x3 line.long 0x00 "PORTA_DATA_CLR,PORTA Port x GPIO Data Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Clear" "0,1" group.long 0x18++0x3 line.long 0x00 "PORTA_DIR,PORTA Port x GPIO Direction Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction" "0,1" group.long 0x1C++0x3 line.long 0x00 "PORTA_DIR_SET,PORTA Port x GPIO Direction Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Set" "0,1" group.long 0x20++0x3 line.long 0x00 "PORTA_DIR_CLR,PORTA Port x GPIO Direction Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Clear" "0,1" group.long 0x24++0x3 line.long 0x00 "PORTA_INEN,PORTA Port x GPIO Input Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable" "0,1" group.long 0x28++0x3 line.long 0x00 "PORTA_INEN_SET,PORTA Port x GPIO Input Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Set" "0,1" group.long 0x2C++0x3 line.long 0x00 "PORTA_INEN_CLR,PORTA Port x GPIO Input Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Clear" "0,1" group.long 0x30++0x3 line.long 0x00 "PORTA_MUX,PORTA Port x Multiplexer Control Register" bitfld.long 0x00 30.--31. " MUX15 ,Mux for Port x Bit 15" "0,1,2,3" bitfld.long 0x00 28.--29. " MUX14 ,Mux for Port x Bit 14" "0,1,2,3" bitfld.long 0x00 26.--27. " MUX13 ,Mux for Port x Bit 13" "0,1,2,3" bitfld.long 0x00 24.--25. " MUX12 ,Mux for Port x Bit 12" "0,1,2,3" newline bitfld.long 0x00 22.--23. " MUX11 ,Mux for Port x Bit 11" "0,1,2,3" bitfld.long 0x00 20.--21. " MUX10 ,Mux for Port x Bit 10" "0,1,2,3" bitfld.long 0x00 18.--19. " MUX9 ,Mux for Port x Bit 9" "0,1,2,3" bitfld.long 0x00 16.--17. " MUX8 ,Mux for Port x Bit 8" "0,1,2,3" newline bitfld.long 0x00 14.--15. " MUX7 ,Mux for Port x Bit 7" "0,1,2,3" bitfld.long 0x00 12.--13. " MUX6 ,Mux for Port x Bit 6" "0,1,2,3" bitfld.long 0x00 10.--11. " MUX5 ,Mux for Port x Bit 5" "0,1,2,3" bitfld.long 0x00 8.--9. " MUX4 ,Mux for Port x Bit 4" "0,1,2,3" newline bitfld.long 0x00 6.--7. " MUX3 ,Mux for Port x Bit 3" "0,1,2,3" bitfld.long 0x00 4.--5. " MUX2 ,Mux for Port x Bit 2" "0,1,2,3" bitfld.long 0x00 2.--3. " MUX1 ,Mux for Port x Bit 1" "0,1,2,3" bitfld.long 0x00 0.--1. " MUX0 ,Mux for Port x Bit 0" "0,1,2,3" group.long 0x34++0x3 line.long 0x00 "PORTA_DATA_TGL,PORTA Port x GPIO Output Toggle Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Toggle" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Toggle" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Toggle" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Toggle" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Toggle" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Toggle" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Toggle" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Toggle" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Toggle" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Toggle" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Toggle" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Toggle" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Toggle" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Toggle" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Toggle" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Toggle" "0,1" group.long 0x38++0x3 line.long 0x00 "PORTA_POL,PORTA Port x GPIO Polarity Invert Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert" "0,1" group.long 0x3C++0x3 line.long 0x00 "PORTA_POL_SET,PORTA Port x GPIO Polarity Invert Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Set" "0,1" group.long 0x40++0x3 line.long 0x00 "PORTA_POL_CLR,PORTA Port x GPIO Polarity Invert Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Clear" "0,1" group.long 0x44++0x3 line.long 0x00 "PORTA_LOCK,PORTA Port x GPIO Lock Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 5. " POLAR ,Polarity Lock" "0,1" bitfld.long 0x00 4. " INEN ,Input Enable Lock" "0,1" bitfld.long 0x00 3. " DIR ,Direction Lock" "0,1" newline bitfld.long 0x00 2. " DATA ,Data, TGL Lock" "0,1" bitfld.long 0x00 1. " MUX ,Function Multiplexer Lock" "0,1" bitfld.long 0x00 0. " FER ,Function Enable Lock" "0,1" tree.end tree "PORTB" base ad:0x31004080 width 16. group.long 0x0++0x3 line.long 0x00 "PORTB_FER,PORTB Port x Function Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "PORTB_FER_SET,PORTB Port x Function Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Set" "0,1" group.long 0x8++0x3 line.long 0x00 "PORTB_FER_CLR,PORTB Port x Function Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Clear" "0,1" group.long 0xC++0x3 line.long 0x00 "PORTB_DATA,PORTB Port x GPIO Data Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data" "0,1" group.long 0x10++0x3 line.long 0x00 "PORTB_DATA_SET,PORTB Port x GPIO Data Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Set" "0,1" group.long 0x14++0x3 line.long 0x00 "PORTB_DATA_CLR,PORTB Port x GPIO Data Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Clear" "0,1" group.long 0x18++0x3 line.long 0x00 "PORTB_DIR,PORTB Port x GPIO Direction Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction" "0,1" group.long 0x1C++0x3 line.long 0x00 "PORTB_DIR_SET,PORTB Port x GPIO Direction Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Set" "0,1" group.long 0x20++0x3 line.long 0x00 "PORTB_DIR_CLR,PORTB Port x GPIO Direction Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Clear" "0,1" group.long 0x24++0x3 line.long 0x00 "PORTB_INEN,PORTB Port x GPIO Input Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable" "0,1" group.long 0x28++0x3 line.long 0x00 "PORTB_INEN_SET,PORTB Port x GPIO Input Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Set" "0,1" group.long 0x2C++0x3 line.long 0x00 "PORTB_INEN_CLR,PORTB Port x GPIO Input Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Clear" "0,1" group.long 0x30++0x3 line.long 0x00 "PORTB_MUX,PORTB Port x Multiplexer Control Register" bitfld.long 0x00 30.--31. " MUX15 ,Mux for Port x Bit 15" "0,1,2,3" bitfld.long 0x00 28.--29. " MUX14 ,Mux for Port x Bit 14" "0,1,2,3" bitfld.long 0x00 26.--27. " MUX13 ,Mux for Port x Bit 13" "0,1,2,3" bitfld.long 0x00 24.--25. " MUX12 ,Mux for Port x Bit 12" "0,1,2,3" newline bitfld.long 0x00 22.--23. " MUX11 ,Mux for Port x Bit 11" "0,1,2,3" bitfld.long 0x00 20.--21. " MUX10 ,Mux for Port x Bit 10" "0,1,2,3" bitfld.long 0x00 18.--19. " MUX9 ,Mux for Port x Bit 9" "0,1,2,3" bitfld.long 0x00 16.--17. " MUX8 ,Mux for Port x Bit 8" "0,1,2,3" newline bitfld.long 0x00 14.--15. " MUX7 ,Mux for Port x Bit 7" "0,1,2,3" bitfld.long 0x00 12.--13. " MUX6 ,Mux for Port x Bit 6" "0,1,2,3" bitfld.long 0x00 10.--11. " MUX5 ,Mux for Port x Bit 5" "0,1,2,3" bitfld.long 0x00 8.--9. " MUX4 ,Mux for Port x Bit 4" "0,1,2,3" newline bitfld.long 0x00 6.--7. " MUX3 ,Mux for Port x Bit 3" "0,1,2,3" bitfld.long 0x00 4.--5. " MUX2 ,Mux for Port x Bit 2" "0,1,2,3" bitfld.long 0x00 2.--3. " MUX1 ,Mux for Port x Bit 1" "0,1,2,3" bitfld.long 0x00 0.--1. " MUX0 ,Mux for Port x Bit 0" "0,1,2,3" group.long 0x34++0x3 line.long 0x00 "PORTB_DATA_TGL,PORTB Port x GPIO Output Toggle Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Toggle" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Toggle" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Toggle" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Toggle" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Toggle" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Toggle" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Toggle" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Toggle" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Toggle" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Toggle" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Toggle" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Toggle" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Toggle" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Toggle" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Toggle" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Toggle" "0,1" group.long 0x38++0x3 line.long 0x00 "PORTB_POL,PORTB Port x GPIO Polarity Invert Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert" "0,1" group.long 0x3C++0x3 line.long 0x00 "PORTB_POL_SET,PORTB Port x GPIO Polarity Invert Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Set" "0,1" group.long 0x40++0x3 line.long 0x00 "PORTB_POL_CLR,PORTB Port x GPIO Polarity Invert Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Clear" "0,1" group.long 0x44++0x3 line.long 0x00 "PORTB_LOCK,PORTB Port x GPIO Lock Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 5. " POLAR ,Polarity Lock" "0,1" bitfld.long 0x00 4. " INEN ,Input Enable Lock" "0,1" bitfld.long 0x00 3. " DIR ,Direction Lock" "0,1" newline bitfld.long 0x00 2. " DATA ,Data, TGL Lock" "0,1" bitfld.long 0x00 1. " MUX ,Function Multiplexer Lock" "0,1" bitfld.long 0x00 0. " FER ,Function Enable Lock" "0,1" tree.end tree "PORTC" base ad:0x31004100 width 16. group.long 0x0++0x3 line.long 0x00 "PORTC_FER,PORTC Port x Function Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "PORTC_FER_SET,PORTC Port x Function Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Set" "0,1" group.long 0x8++0x3 line.long 0x00 "PORTC_FER_CLR,PORTC Port x Function Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Clear" "0,1" group.long 0xC++0x3 line.long 0x00 "PORTC_DATA,PORTC Port x GPIO Data Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data" "0,1" group.long 0x10++0x3 line.long 0x00 "PORTC_DATA_SET,PORTC Port x GPIO Data Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Set" "0,1" group.long 0x14++0x3 line.long 0x00 "PORTC_DATA_CLR,PORTC Port x GPIO Data Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Clear" "0,1" group.long 0x18++0x3 line.long 0x00 "PORTC_DIR,PORTC Port x GPIO Direction Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction" "0,1" group.long 0x1C++0x3 line.long 0x00 "PORTC_DIR_SET,PORTC Port x GPIO Direction Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Set" "0,1" group.long 0x20++0x3 line.long 0x00 "PORTC_DIR_CLR,PORTC Port x GPIO Direction Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Clear" "0,1" group.long 0x24++0x3 line.long 0x00 "PORTC_INEN,PORTC Port x GPIO Input Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable" "0,1" group.long 0x28++0x3 line.long 0x00 "PORTC_INEN_SET,PORTC Port x GPIO Input Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Set" "0,1" group.long 0x2C++0x3 line.long 0x00 "PORTC_INEN_CLR,PORTC Port x GPIO Input Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Clear" "0,1" group.long 0x30++0x3 line.long 0x00 "PORTC_MUX,PORTC Port x Multiplexer Control Register" bitfld.long 0x00 30.--31. " MUX15 ,Mux for Port x Bit 15" "0,1,2,3" bitfld.long 0x00 28.--29. " MUX14 ,Mux for Port x Bit 14" "0,1,2,3" bitfld.long 0x00 26.--27. " MUX13 ,Mux for Port x Bit 13" "0,1,2,3" bitfld.long 0x00 24.--25. " MUX12 ,Mux for Port x Bit 12" "0,1,2,3" newline bitfld.long 0x00 22.--23. " MUX11 ,Mux for Port x Bit 11" "0,1,2,3" bitfld.long 0x00 20.--21. " MUX10 ,Mux for Port x Bit 10" "0,1,2,3" bitfld.long 0x00 18.--19. " MUX9 ,Mux for Port x Bit 9" "0,1,2,3" bitfld.long 0x00 16.--17. " MUX8 ,Mux for Port x Bit 8" "0,1,2,3" newline bitfld.long 0x00 14.--15. " MUX7 ,Mux for Port x Bit 7" "0,1,2,3" bitfld.long 0x00 12.--13. " MUX6 ,Mux for Port x Bit 6" "0,1,2,3" bitfld.long 0x00 10.--11. " MUX5 ,Mux for Port x Bit 5" "0,1,2,3" bitfld.long 0x00 8.--9. " MUX4 ,Mux for Port x Bit 4" "0,1,2,3" newline bitfld.long 0x00 6.--7. " MUX3 ,Mux for Port x Bit 3" "0,1,2,3" bitfld.long 0x00 4.--5. " MUX2 ,Mux for Port x Bit 2" "0,1,2,3" bitfld.long 0x00 2.--3. " MUX1 ,Mux for Port x Bit 1" "0,1,2,3" bitfld.long 0x00 0.--1. " MUX0 ,Mux for Port x Bit 0" "0,1,2,3" group.long 0x34++0x3 line.long 0x00 "PORTC_DATA_TGL,PORTC Port x GPIO Output Toggle Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Toggle" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Toggle" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Toggle" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Toggle" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Toggle" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Toggle" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Toggle" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Toggle" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Toggle" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Toggle" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Toggle" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Toggle" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Toggle" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Toggle" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Toggle" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Toggle" "0,1" group.long 0x38++0x3 line.long 0x00 "PORTC_POL,PORTC Port x GPIO Polarity Invert Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert" "0,1" group.long 0x3C++0x3 line.long 0x00 "PORTC_POL_SET,PORTC Port x GPIO Polarity Invert Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Set" "0,1" group.long 0x40++0x3 line.long 0x00 "PORTC_POL_CLR,PORTC Port x GPIO Polarity Invert Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Clear" "0,1" group.long 0x44++0x3 line.long 0x00 "PORTC_LOCK,PORTC Port x GPIO Lock Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 5. " POLAR ,Polarity Lock" "0,1" bitfld.long 0x00 4. " INEN ,Input Enable Lock" "0,1" bitfld.long 0x00 3. " DIR ,Direction Lock" "0,1" newline bitfld.long 0x00 2. " DATA ,Data, TGL Lock" "0,1" bitfld.long 0x00 1. " MUX ,Function Multiplexer Lock" "0,1" bitfld.long 0x00 0. " FER ,Function Enable Lock" "0,1" tree.end tree "PORTD" base ad:0x31004180 width 16. group.long 0x0++0x3 line.long 0x00 "PORTD_FER,PORTD Port x Function Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "PORTD_FER_SET,PORTD Port x Function Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Set" "0,1" group.long 0x8++0x3 line.long 0x00 "PORTD_FER_CLR,PORTD Port x Function Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Clear" "0,1" group.long 0xC++0x3 line.long 0x00 "PORTD_DATA,PORTD Port x GPIO Data Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data" "0,1" group.long 0x10++0x3 line.long 0x00 "PORTD_DATA_SET,PORTD Port x GPIO Data Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Set" "0,1" group.long 0x14++0x3 line.long 0x00 "PORTD_DATA_CLR,PORTD Port x GPIO Data Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Clear" "0,1" group.long 0x18++0x3 line.long 0x00 "PORTD_DIR,PORTD Port x GPIO Direction Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction" "0,1" group.long 0x1C++0x3 line.long 0x00 "PORTD_DIR_SET,PORTD Port x GPIO Direction Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Set" "0,1" group.long 0x20++0x3 line.long 0x00 "PORTD_DIR_CLR,PORTD Port x GPIO Direction Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Clear" "0,1" group.long 0x24++0x3 line.long 0x00 "PORTD_INEN,PORTD Port x GPIO Input Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable" "0,1" group.long 0x28++0x3 line.long 0x00 "PORTD_INEN_SET,PORTD Port x GPIO Input Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Set" "0,1" group.long 0x2C++0x3 line.long 0x00 "PORTD_INEN_CLR,PORTD Port x GPIO Input Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Clear" "0,1" group.long 0x30++0x3 line.long 0x00 "PORTD_MUX,PORTD Port x Multiplexer Control Register" bitfld.long 0x00 30.--31. " MUX15 ,Mux for Port x Bit 15" "0,1,2,3" bitfld.long 0x00 28.--29. " MUX14 ,Mux for Port x Bit 14" "0,1,2,3" bitfld.long 0x00 26.--27. " MUX13 ,Mux for Port x Bit 13" "0,1,2,3" bitfld.long 0x00 24.--25. " MUX12 ,Mux for Port x Bit 12" "0,1,2,3" newline bitfld.long 0x00 22.--23. " MUX11 ,Mux for Port x Bit 11" "0,1,2,3" bitfld.long 0x00 20.--21. " MUX10 ,Mux for Port x Bit 10" "0,1,2,3" bitfld.long 0x00 18.--19. " MUX9 ,Mux for Port x Bit 9" "0,1,2,3" bitfld.long 0x00 16.--17. " MUX8 ,Mux for Port x Bit 8" "0,1,2,3" newline bitfld.long 0x00 14.--15. " MUX7 ,Mux for Port x Bit 7" "0,1,2,3" bitfld.long 0x00 12.--13. " MUX6 ,Mux for Port x Bit 6" "0,1,2,3" bitfld.long 0x00 10.--11. " MUX5 ,Mux for Port x Bit 5" "0,1,2,3" bitfld.long 0x00 8.--9. " MUX4 ,Mux for Port x Bit 4" "0,1,2,3" newline bitfld.long 0x00 6.--7. " MUX3 ,Mux for Port x Bit 3" "0,1,2,3" bitfld.long 0x00 4.--5. " MUX2 ,Mux for Port x Bit 2" "0,1,2,3" bitfld.long 0x00 2.--3. " MUX1 ,Mux for Port x Bit 1" "0,1,2,3" bitfld.long 0x00 0.--1. " MUX0 ,Mux for Port x Bit 0" "0,1,2,3" group.long 0x34++0x3 line.long 0x00 "PORTD_DATA_TGL,PORTD Port x GPIO Output Toggle Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Toggle" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Toggle" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Toggle" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Toggle" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Toggle" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Toggle" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Toggle" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Toggle" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Toggle" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Toggle" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Toggle" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Toggle" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Toggle" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Toggle" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Toggle" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Toggle" "0,1" group.long 0x38++0x3 line.long 0x00 "PORTD_POL,PORTD Port x GPIO Polarity Invert Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert" "0,1" group.long 0x3C++0x3 line.long 0x00 "PORTD_POL_SET,PORTD Port x GPIO Polarity Invert Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Set" "0,1" group.long 0x40++0x3 line.long 0x00 "PORTD_POL_CLR,PORTD Port x GPIO Polarity Invert Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Clear" "0,1" group.long 0x44++0x3 line.long 0x00 "PORTD_LOCK,PORTD Port x GPIO Lock Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 5. " POLAR ,Polarity Lock" "0,1" bitfld.long 0x00 4. " INEN ,Input Enable Lock" "0,1" bitfld.long 0x00 3. " DIR ,Direction Lock" "0,1" newline bitfld.long 0x00 2. " DATA ,Data, TGL Lock" "0,1" bitfld.long 0x00 1. " MUX ,Function Multiplexer Lock" "0,1" bitfld.long 0x00 0. " FER ,Function Enable Lock" "0,1" tree.end tree "PORTE" base ad:0x31004200 width 16. group.long 0x0++0x3 line.long 0x00 "PORTE_FER,PORTE Port x Function Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "PORTE_FER_SET,PORTE Port x Function Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Set" "0,1" group.long 0x8++0x3 line.long 0x00 "PORTE_FER_CLR,PORTE Port x Function Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Clear" "0,1" group.long 0xC++0x3 line.long 0x00 "PORTE_DATA,PORTE Port x GPIO Data Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data" "0,1" group.long 0x10++0x3 line.long 0x00 "PORTE_DATA_SET,PORTE Port x GPIO Data Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Set" "0,1" group.long 0x14++0x3 line.long 0x00 "PORTE_DATA_CLR,PORTE Port x GPIO Data Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Clear" "0,1" group.long 0x18++0x3 line.long 0x00 "PORTE_DIR,PORTE Port x GPIO Direction Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction" "0,1" group.long 0x1C++0x3 line.long 0x00 "PORTE_DIR_SET,PORTE Port x GPIO Direction Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Set" "0,1" group.long 0x20++0x3 line.long 0x00 "PORTE_DIR_CLR,PORTE Port x GPIO Direction Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Clear" "0,1" group.long 0x24++0x3 line.long 0x00 "PORTE_INEN,PORTE Port x GPIO Input Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable" "0,1" group.long 0x28++0x3 line.long 0x00 "PORTE_INEN_SET,PORTE Port x GPIO Input Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Set" "0,1" group.long 0x2C++0x3 line.long 0x00 "PORTE_INEN_CLR,PORTE Port x GPIO Input Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Clear" "0,1" group.long 0x30++0x3 line.long 0x00 "PORTE_MUX,PORTE Port x Multiplexer Control Register" bitfld.long 0x00 30.--31. " MUX15 ,Mux for Port x Bit 15" "0,1,2,3" bitfld.long 0x00 28.--29. " MUX14 ,Mux for Port x Bit 14" "0,1,2,3" bitfld.long 0x00 26.--27. " MUX13 ,Mux for Port x Bit 13" "0,1,2,3" bitfld.long 0x00 24.--25. " MUX12 ,Mux for Port x Bit 12" "0,1,2,3" newline bitfld.long 0x00 22.--23. " MUX11 ,Mux for Port x Bit 11" "0,1,2,3" bitfld.long 0x00 20.--21. " MUX10 ,Mux for Port x Bit 10" "0,1,2,3" bitfld.long 0x00 18.--19. " MUX9 ,Mux for Port x Bit 9" "0,1,2,3" bitfld.long 0x00 16.--17. " MUX8 ,Mux for Port x Bit 8" "0,1,2,3" newline bitfld.long 0x00 14.--15. " MUX7 ,Mux for Port x Bit 7" "0,1,2,3" bitfld.long 0x00 12.--13. " MUX6 ,Mux for Port x Bit 6" "0,1,2,3" bitfld.long 0x00 10.--11. " MUX5 ,Mux for Port x Bit 5" "0,1,2,3" bitfld.long 0x00 8.--9. " MUX4 ,Mux for Port x Bit 4" "0,1,2,3" newline bitfld.long 0x00 6.--7. " MUX3 ,Mux for Port x Bit 3" "0,1,2,3" bitfld.long 0x00 4.--5. " MUX2 ,Mux for Port x Bit 2" "0,1,2,3" bitfld.long 0x00 2.--3. " MUX1 ,Mux for Port x Bit 1" "0,1,2,3" bitfld.long 0x00 0.--1. " MUX0 ,Mux for Port x Bit 0" "0,1,2,3" group.long 0x34++0x3 line.long 0x00 "PORTE_DATA_TGL,PORTE Port x GPIO Output Toggle Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Toggle" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Toggle" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Toggle" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Toggle" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Toggle" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Toggle" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Toggle" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Toggle" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Toggle" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Toggle" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Toggle" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Toggle" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Toggle" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Toggle" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Toggle" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Toggle" "0,1" group.long 0x38++0x3 line.long 0x00 "PORTE_POL,PORTE Port x GPIO Polarity Invert Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert" "0,1" group.long 0x3C++0x3 line.long 0x00 "PORTE_POL_SET,PORTE Port x GPIO Polarity Invert Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Set" "0,1" group.long 0x40++0x3 line.long 0x00 "PORTE_POL_CLR,PORTE Port x GPIO Polarity Invert Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Clear" "0,1" group.long 0x44++0x3 line.long 0x00 "PORTE_LOCK,PORTE Port x GPIO Lock Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 5. " POLAR ,Polarity Lock" "0,1" bitfld.long 0x00 4. " INEN ,Input Enable Lock" "0,1" bitfld.long 0x00 3. " DIR ,Direction Lock" "0,1" newline bitfld.long 0x00 2. " DATA ,Data, TGL Lock" "0,1" bitfld.long 0x00 1. " MUX ,Function Multiplexer Lock" "0,1" bitfld.long 0x00 0. " FER ,Function Enable Lock" "0,1" tree.end sif !cpuis("ADSP-SC584")&&!cpuis("ADSP-SC584W") tree "PORTF" base ad:0x31004280 width 16. group.long 0x0++0x3 line.long 0x00 "PORTF_FER,PORTF Port x Function Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "PORTF_FER_SET,PORTF Port x Function Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Set" "0,1" group.long 0x8++0x3 line.long 0x00 "PORTF_FER_CLR,PORTF Port x Function Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Clear" "0,1" group.long 0xC++0x3 line.long 0x00 "PORTF_DATA,PORTF Port x GPIO Data Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data" "0,1" group.long 0x10++0x3 line.long 0x00 "PORTF_DATA_SET,PORTF Port x GPIO Data Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Set" "0,1" group.long 0x14++0x3 line.long 0x00 "PORTF_DATA_CLR,PORTF Port x GPIO Data Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Clear" "0,1" group.long 0x18++0x3 line.long 0x00 "PORTF_DIR,PORTF Port x GPIO Direction Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction" "0,1" group.long 0x1C++0x3 line.long 0x00 "PORTF_DIR_SET,PORTF Port x GPIO Direction Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Set" "0,1" group.long 0x20++0x3 line.long 0x00 "PORTF_DIR_CLR,PORTF Port x GPIO Direction Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Clear" "0,1" group.long 0x24++0x3 line.long 0x00 "PORTF_INEN,PORTF Port x GPIO Input Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable" "0,1" group.long 0x28++0x3 line.long 0x00 "PORTF_INEN_SET,PORTF Port x GPIO Input Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Set" "0,1" group.long 0x2C++0x3 line.long 0x00 "PORTF_INEN_CLR,PORTF Port x GPIO Input Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Clear" "0,1" group.long 0x30++0x3 line.long 0x00 "PORTF_MUX,PORTF Port x Multiplexer Control Register" bitfld.long 0x00 30.--31. " MUX15 ,Mux for Port x Bit 15" "0,1,2,3" bitfld.long 0x00 28.--29. " MUX14 ,Mux for Port x Bit 14" "0,1,2,3" bitfld.long 0x00 26.--27. " MUX13 ,Mux for Port x Bit 13" "0,1,2,3" bitfld.long 0x00 24.--25. " MUX12 ,Mux for Port x Bit 12" "0,1,2,3" newline bitfld.long 0x00 22.--23. " MUX11 ,Mux for Port x Bit 11" "0,1,2,3" bitfld.long 0x00 20.--21. " MUX10 ,Mux for Port x Bit 10" "0,1,2,3" bitfld.long 0x00 18.--19. " MUX9 ,Mux for Port x Bit 9" "0,1,2,3" bitfld.long 0x00 16.--17. " MUX8 ,Mux for Port x Bit 8" "0,1,2,3" newline bitfld.long 0x00 14.--15. " MUX7 ,Mux for Port x Bit 7" "0,1,2,3" bitfld.long 0x00 12.--13. " MUX6 ,Mux for Port x Bit 6" "0,1,2,3" bitfld.long 0x00 10.--11. " MUX5 ,Mux for Port x Bit 5" "0,1,2,3" bitfld.long 0x00 8.--9. " MUX4 ,Mux for Port x Bit 4" "0,1,2,3" newline bitfld.long 0x00 6.--7. " MUX3 ,Mux for Port x Bit 3" "0,1,2,3" bitfld.long 0x00 4.--5. " MUX2 ,Mux for Port x Bit 2" "0,1,2,3" bitfld.long 0x00 2.--3. " MUX1 ,Mux for Port x Bit 1" "0,1,2,3" bitfld.long 0x00 0.--1. " MUX0 ,Mux for Port x Bit 0" "0,1,2,3" group.long 0x34++0x3 line.long 0x00 "PORTF_DATA_TGL,PORTF Port x GPIO Output Toggle Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Toggle" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Toggle" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Toggle" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Toggle" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Toggle" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Toggle" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Toggle" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Toggle" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Toggle" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Toggle" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Toggle" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Toggle" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Toggle" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Toggle" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Toggle" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Toggle" "0,1" group.long 0x38++0x3 line.long 0x00 "PORTF_POL,PORTF Port x GPIO Polarity Invert Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert" "0,1" group.long 0x3C++0x3 line.long 0x00 "PORTF_POL_SET,PORTF Port x GPIO Polarity Invert Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Set" "0,1" group.long 0x40++0x3 line.long 0x00 "PORTF_POL_CLR,PORTF Port x GPIO Polarity Invert Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Clear" "0,1" group.long 0x44++0x3 line.long 0x00 "PORTF_LOCK,PORTF Port x GPIO Lock Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 5. " POLAR ,Polarity Lock" "0,1" bitfld.long 0x00 4. " INEN ,Input Enable Lock" "0,1" bitfld.long 0x00 3. " DIR ,Direction Lock" "0,1" newline bitfld.long 0x00 2. " DATA ,Data, TGL Lock" "0,1" bitfld.long 0x00 1. " MUX ,Function Multiplexer Lock" "0,1" bitfld.long 0x00 0. " FER ,Function Enable Lock" "0,1" tree.end tree "PORTG" base ad:0x31004300 width 16. group.long 0x0++0x3 line.long 0x00 "PORTG_FER,PORTG Port x Function Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode" "0,1" group.long 0x4++0x3 line.long 0x00 "PORTG_FER_SET,PORTG Port x Function Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Set" "0,1" group.long 0x8++0x3 line.long 0x00 "PORTG_FER_CLR,PORTG Port x Function Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Mode Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Mode Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Mode Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Mode Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Mode Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Mode Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Mode Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Mode Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Mode Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Mode Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Mode Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Mode Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Mode Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Mode Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Mode Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Mode Clear" "0,1" group.long 0xC++0x3 line.long 0x00 "PORTG_DATA,PORTG Port x GPIO Data Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data" "0,1" group.long 0x10++0x3 line.long 0x00 "PORTG_DATA_SET,PORTG Port x GPIO Data Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Set" "0,1" group.long 0x14++0x3 line.long 0x00 "PORTG_DATA_CLR,PORTG Port x GPIO Data Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Data Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Data Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Data Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Data Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Data Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Data Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Data Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Data Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Data Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Data Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Data Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Data Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Data Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Data Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Data Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Data Clear" "0,1" group.long 0x18++0x3 line.long 0x00 "PORTG_DIR,PORTG Port x GPIO Direction Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction" "0,1" group.long 0x1C++0x3 line.long 0x00 "PORTG_DIR_SET,PORTG Port x GPIO Direction Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Set" "0,1" group.long 0x20++0x3 line.long 0x00 "PORTG_DIR_CLR,PORTG Port x GPIO Direction Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Direction Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Direction Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Direction Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Direction Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Direction Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Direction Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Direction Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Direction Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Direction Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Direction Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Direction Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Direction Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Direction Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Direction Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Direction Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Direction Clear" "0,1" group.long 0x24++0x3 line.long 0x00 "PORTG_INEN,PORTG Port x GPIO Input Enable Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable" "0,1" group.long 0x28++0x3 line.long 0x00 "PORTG_INEN_SET,PORTG Port x GPIO Input Enable Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Set" "0,1" group.long 0x2C++0x3 line.long 0x00 "PORTG_INEN_CLR,PORTG Port x GPIO Input Enable Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Input Enable Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Input Enable Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Input Enable Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Input Enable Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Input Enable Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Input Enable Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Input Enable Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Input Enable Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Input Enable Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Input Enable Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Input Enable Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Input Enable Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Input Enable Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Input Enable Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Input Enable Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Input Enable Clear" "0,1" group.long 0x30++0x3 line.long 0x00 "PORTG_MUX,PORTG Port x Multiplexer Control Register" bitfld.long 0x00 30.--31. " MUX15 ,Mux for Port x Bit 15" "0,1,2,3" bitfld.long 0x00 28.--29. " MUX14 ,Mux for Port x Bit 14" "0,1,2,3" bitfld.long 0x00 26.--27. " MUX13 ,Mux for Port x Bit 13" "0,1,2,3" bitfld.long 0x00 24.--25. " MUX12 ,Mux for Port x Bit 12" "0,1,2,3" newline bitfld.long 0x00 22.--23. " MUX11 ,Mux for Port x Bit 11" "0,1,2,3" bitfld.long 0x00 20.--21. " MUX10 ,Mux for Port x Bit 10" "0,1,2,3" bitfld.long 0x00 18.--19. " MUX9 ,Mux for Port x Bit 9" "0,1,2,3" bitfld.long 0x00 16.--17. " MUX8 ,Mux for Port x Bit 8" "0,1,2,3" newline bitfld.long 0x00 14.--15. " MUX7 ,Mux for Port x Bit 7" "0,1,2,3" bitfld.long 0x00 12.--13. " MUX6 ,Mux for Port x Bit 6" "0,1,2,3" bitfld.long 0x00 10.--11. " MUX5 ,Mux for Port x Bit 5" "0,1,2,3" bitfld.long 0x00 8.--9. " MUX4 ,Mux for Port x Bit 4" "0,1,2,3" newline bitfld.long 0x00 6.--7. " MUX3 ,Mux for Port x Bit 3" "0,1,2,3" bitfld.long 0x00 4.--5. " MUX2 ,Mux for Port x Bit 2" "0,1,2,3" bitfld.long 0x00 2.--3. " MUX1 ,Mux for Port x Bit 1" "0,1,2,3" bitfld.long 0x00 0.--1. " MUX0 ,Mux for Port x Bit 0" "0,1,2,3" group.long 0x34++0x3 line.long 0x00 "PORTG_DATA_TGL,PORTG Port x GPIO Output Toggle Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Toggle" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Toggle" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Toggle" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Toggle" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Toggle" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Toggle" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Toggle" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Toggle" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Toggle" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Toggle" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Toggle" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Toggle" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Toggle" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Toggle" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Toggle" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Toggle" "0,1" group.long 0x38++0x3 line.long 0x00 "PORTG_POL,PORTG Port x GPIO Polarity Invert Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert" "0,1" group.long 0x3C++0x3 line.long 0x00 "PORTG_POL_SET,PORTG Port x GPIO Polarity Invert Set Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Set" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Set" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Set" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Set" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Set" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Set" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Set" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Set" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Set" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Set" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Set" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Set" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Set" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Set" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Set" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Set" "0,1" group.long 0x40++0x3 line.long 0x00 "PORTG_POL_CLR,PORTG Port x GPIO Polarity Invert Clear Register" bitfld.long 0x00 15. " PX15 ,Port x Bit 15 Polarity Invert Clear" "0,1" bitfld.long 0x00 14. " PX14 ,Port x Bit 14 Polarity Invert Clear" "0,1" bitfld.long 0x00 13. " PX13 ,Port x Bit 13 Polarity Invert Clear" "0,1" bitfld.long 0x00 12. " PX12 ,Port x Bit 12 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 11. " PX11 ,Port x Bit 11 Polarity Invert Clear" "0,1" bitfld.long 0x00 10. " PX10 ,Port x Bit 10 Polarity Invert Clear" "0,1" bitfld.long 0x00 9. " PX9 ,Port x Bit 9 Polarity Invert Clear" "0,1" bitfld.long 0x00 8. " PX8 ,Port x Bit 8 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 7. " PX7 ,Port x Bit 7 Polarity Invert Clear" "0,1" bitfld.long 0x00 6. " PX6 ,Port x Bit 6 Polarity Invert Clear" "0,1" bitfld.long 0x00 5. " PX5 ,Port x Bit 5 Polarity Invert Clear" "0,1" bitfld.long 0x00 4. " PX4 ,Port x Bit 4 Polarity Invert Clear" "0,1" newline bitfld.long 0x00 3. " PX3 ,Port x Bit 3 Polarity Invert Clear" "0,1" bitfld.long 0x00 2. " PX2 ,Port x Bit 2 Polarity Invert Clear" "0,1" bitfld.long 0x00 1. " PX1 ,Port x Bit 1 Polarity Invert Clear" "0,1" bitfld.long 0x00 0. " PX0 ,Port x Bit 0 Polarity Invert Clear" "0,1" group.long 0x44++0x3 line.long 0x00 "PORTG_LOCK,PORTG Port x GPIO Lock Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 5. " POLAR ,Polarity Lock" "0,1" bitfld.long 0x00 4. " INEN ,Input Enable Lock" "0,1" bitfld.long 0x00 3. " DIR ,Direction Lock" "0,1" newline bitfld.long 0x00 2. " DATA ,Data, TGL Lock" "0,1" bitfld.long 0x00 1. " MUX ,Function Multiplexer Lock" "0,1" bitfld.long 0x00 0. " FER ,Function Enable Lock" "0,1" tree.end endif tree.end tree "PWM (Pulse-Width Modulator)" tree "PWM0" base ad:0x3100A000 width 15. group.long 0x0++0x3 line.long 0x00 "PWM0_CTL,PWM0 Control Register" bitfld.long 0x00 18.--20. " INTSYNCREF ,Timer reference for Internal Sync" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17. " EXTSYNCSEL ,External Sync Select" "0,1" bitfld.long 0x00 16. " EXTSYNC ,External Sync" "0,1" bitfld.long 0x00 8. " ADEN ,Asymmetric Dead-time Enable" "0,1" newline bitfld.long 0x00 7. " DLYDEN ,Enable Delay Counter for Channel D" "0,1" bitfld.long 0x00 6. " DLYCEN ,Enable Delay Counter for Channel C" "0,1" bitfld.long 0x00 5. " DLYBEN ,Enable Delay Counter for Channel B" "0,1" bitfld.long 0x00 4. " DLYAEN ,Enable Delay Counter for Channel A" "0,1" newline bitfld.long 0x00 3. " DUEN ,Double Update Mode Enable" "0,1" bitfld.long 0x00 2. " SWTRIP ,Software Trip" "0,1" bitfld.long 0x00 1. " EMURUN ,Output Behavior During Emulation Mode" "0,1" bitfld.long 0x00 0. " GLOBEN ,Module Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "PWM0_CHANCFG,PWM0 Channel Configuration Register" bitfld.long 0x00 30. " ENCHOPDL ,Channel D Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 29. " POLDL ,Channel D low side Polarity" "0,1" bitfld.long 0x00 28. " ENHPDH ,Channel D heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 27. " ENCHOPDH ,Channel D Gate Chopping Enable High Side" "0,1" newline bitfld.long 0x00 26. " POLDH ,Channel D High side Polarity" "0,1" bitfld.long 0x00 25. " MODELSD ,Channel D Mode of low Side Output" "0,1" bitfld.long 0x00 24. " REFTMRD ,Channel D Timer Reference" "0,1" bitfld.long 0x00 22. " ENCHOPCL ,Channel C Gate Chopping Enable Low Side" "0,1" newline bitfld.long 0x00 21. " POLCL ,Channel C low side Polarity" "0,1" bitfld.long 0x00 20. " ENHPCH ,Channel C heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 19. " ENCHOPCH ,Channel C Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 18. " POLCH ,Channel C High side Polarity" "0,1" newline bitfld.long 0x00 17. " MODELSC ,Channel C Mode of low Side Output" "0,1" bitfld.long 0x00 16. " REFTMRC ,Channel C Timer Reference" "0,1" bitfld.long 0x00 14. " ENCHOPBL ,Channel B Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 13. " POLBL ,Channel B low side Polarity" "0,1" newline bitfld.long 0x00 12. " ENHPBH ,Channel B heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 11. " ENCHOPBH ,Channel B Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 10. " POLBH ,Channel B High side Polarity" "0,1" bitfld.long 0x00 9. " MODELSB ,Channel B Mode of low Side Output" "0,1" newline bitfld.long 0x00 8. " REFTMRB ,Channel B Timer Reference" "0,1" bitfld.long 0x00 6. " ENCHOPAL ,Channel A Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 5. " POLAL ,Channel A low side Polarity" "0,1" bitfld.long 0x00 4. " ENHPAH ,Channel A heightened-precision enable for high side Output" "0,1" newline bitfld.long 0x00 3. " ENCHOPAH ,Channel A Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 2. " POLAH ,Channel A High side Polarity" "0,1" bitfld.long 0x00 1. " MODELSA ,Channel A Mode of low Side Output" "0,1" bitfld.long 0x00 0. " REFTMRA ,Channel A Timer Reference" "0,1" group.long 0x8++0x3 line.long 0x00 "PWM0_TRIPCFG,PWM0 Trip Configuration Register" bitfld.long 0x00 27. " MODE1D ,Mode of TRIP1 for Channel D" "0,1" bitfld.long 0x00 26. " EN1D ,Enable TRIP1 for Channel D" "0,1" bitfld.long 0x00 25. " MODE0D ,Mode of TRIP0 for Channel D" "0,1" bitfld.long 0x00 24. " EN0D ,Enable TRIP0 for Channel D" "0,1" newline bitfld.long 0x00 19. " MODE1C ,Mode of TRIP1 for Channel C" "0,1" bitfld.long 0x00 18. " EN1C ,Enable TRIP1 as a trip source for Channel C" "0,1" bitfld.long 0x00 17. " MODE0C ,Mode of TRIP0 for Channel C" "0,1" bitfld.long 0x00 16. " EN0C ,Enable TRIP0 for Channel C" "0,1" newline bitfld.long 0x00 11. " MODE1B ,Mode of TRIP1 for Channel B" "0,1" bitfld.long 0x00 10. " EN1B ,Enable TRIP1 for Channel B" "0,1" bitfld.long 0x00 9. " MODE0B ,Mode of TRIP0 for Channel B" "0,1" bitfld.long 0x00 8. " EN0B ,Enable TRIP0 as a trip source for Channel B" "0,1" newline bitfld.long 0x00 3. " MODE1A ,Mode of TRIP1 for Channel A" "0,1" bitfld.long 0x00 2. " EN1A ,Enable TRIP1 as a trip source for Channel A" "0,1" bitfld.long 0x00 1. " MODE0A ,Mode of TRIP0 for Channel A" "0,1" bitfld.long 0x00 0. " EN0A ,Enable TRIP0 as a trip source for Channel A" "0,1" group.long 0xC++0x3 line.long 0x00 "PWM0_STAT,PWM0 Status Register" bitfld.long 0x00 31. " HPRDY ,Heightened-Precision Ready Status" "0,1" bitfld.long 0x00 28. " TMR4PHASE ,PWMTMR4 Phase Status" "0,1" bitfld.long 0x00 27. " TMR3PHASE ,PWMTMR3 Phase Status" "0,1" bitfld.long 0x00 26. " TMR2PHASE ,PWMTMR2 Phase Status" "0,1" newline bitfld.long 0x00 25. " TMR1PHASE ,PWMTMR1 Phase Status" "0,1" bitfld.long 0x00 24. " TMR0PHASE ,PWMTMR0 Phase Status" "0,1" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Boundary Status" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Boundary Status" "0,1" newline bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Boundary Status" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Boundary Status" "0,1" bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Status" "0,1" bitfld.long 0x00 11. " SRTRIPD ,Self-Restart Trip Status for Channel D" "0,1" newline bitfld.long 0x00 10. " FLTTRIPD ,Fault Trip Status for Channel D" "0,1" bitfld.long 0x00 9. " SRTRIPC ,Self-Restart Trip Status for Channel C" "0,1" bitfld.long 0x00 8. " FLTTRIPC ,Fault Trip Status for Channel C" "0,1" bitfld.long 0x00 7. " SRTRIPB ,Self-Restart Trip Status for Channel B" "0,1" newline bitfld.long 0x00 6. " FLTTRIPB ,Fault Trip Status for Channel B" "0,1" bitfld.long 0x00 5. " SRTRIPA ,Self-Restart Trip Status for Channel A" "0,1" bitfld.long 0x00 4. " FLTTRIPA ,Fault Trip Status for Channel A" "0,1" bitfld.long 0x00 3. " RAWTRIP1 ,Raw Trip 1 Status" "0,1" newline bitfld.long 0x00 2. " RAWTRIP0 ,Raw Trip 0 Status" "0,1" bitfld.long 0x00 1. " TRIP1 ,Status bit set when TRIP1 is active low" "0,1" bitfld.long 0x00 0. " TRIP0 ,Status bit set when TRIP0 is active low" "0,1" group.long 0x10++0x3 line.long 0x00 "PWM0_IMSK,PWM0 Interrupt Mask Register" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Boundary Interrupt Enable" "0,1" newline bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 1. " TRIP1 ,TRIP1 Interrupt Enable" "0,1" bitfld.long 0x00 0. " TRIP0 ,TRIP0 Interrupt Enable" "0,1" group.long 0x14++0x3 line.long 0x00 "PWM0_ILAT,PWM0 Interrupt Latch Register" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Latched Interrupt Status" "0,1" newline bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Interrupt Latched Status" "0,1" bitfld.long 0x00 1. " TRIP1 ,TRIP1 Interrupt Latched Status" "0,1" bitfld.long 0x00 0. " TRIP0 ,TRIP0 Interrupt Latched Status" "0,1" group.long 0x18++0x3 line.long 0x00 "PWM0_CHOPCFG,PWM0 Chop Configuration Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Gate Chopping Divisor" group.long 0x20++0x3 line.long 0x00 "PWM0_SYNC_WID,PWM0 Sync Pulse Width Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Sync Pulse Width" group.long 0x24++0x3 line.long 0x00 "PWM0_TM0,PWM0 Timer 0 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR0 Period Value" group.long 0x28++0x3 line.long 0x00 "PWM0_TM1,PWM0 Timer 1 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR1 Period Value" group.long 0x2C++0x3 line.long 0x00 "PWM0_TM2,PWM0 Timer 2 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR2 Period Value" group.long 0x30++0x3 line.long 0x00 "PWM0_TM3,PWM0 Timer 3 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR3 Period Value" group.long 0x34++0x3 line.long 0x00 "PWM0_TM4,PWM0 Timer 4 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR4 Period Value" group.long 0x38++0x3 line.long 0x00 "PWM0_DLYA,PWM0 Channel A Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel A Delay Value" group.long 0x3C++0x3 line.long 0x00 "PWM0_DLYB,PWM0 Channel B Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel B Delay Value" group.long 0x40++0x3 line.long 0x00 "PWM0_DLYC,PWM0 Channel C Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel C Delay Value" group.long 0x44++0x3 line.long 0x00 "PWM0_DLYD,PWM0 Channel D Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel D Delay Value" group.long 0x48++0x3 line.long 0x00 "PWM0_ACTL,PWM0 Channel A Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x4C++0x3 line.long 0x00 "PWM0_AH0,PWM0 Channel A-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x50++0x3 line.long 0x00 "PWM0_AH1,PWM0 Channel A-High Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x54++0x3 line.long 0x00 "PWM0_AH0_HP,PWM0 Channel A-High Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x58++0x3 line.long 0x00 "PWM0_AH1_HP,PWM0 Channel A-High Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x5C++0x3 line.long 0x00 "PWM0_AL0,PWM0 Channel A-Low Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x60++0x3 line.long 0x00 "PWM0_AL1,PWM0 Channel A-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x64++0x3 line.long 0x00 "PWM0_AL0_HP,PWM0 Channel A-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x68++0x3 line.long 0x00 "PWM0_AL1_HP,PWM0 Channel A-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x6C++0x3 line.long 0x00 "PWM0_BCTL,PWM0 Channel B Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x70++0x3 line.long 0x00 "PWM0_BH0,PWM0 Channel B-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x74++0x3 line.long 0x00 "PWM0_BH1,PWM0 Channel B-High Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x78++0x3 line.long 0x00 "PWM0_BH0_HP,PWM0 Channel B-High Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x7C++0x3 line.long 0x00 "PWM0_BH1_HP,PWM0 Channel B-High Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x80++0x3 line.long 0x00 "PWM0_BL0,PWM0 Channel B-Low Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x84++0x3 line.long 0x00 "PWM0_BL1,PWM0 Channel B-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x88++0x3 line.long 0x00 "PWM0_BL0_HP,PWM0 Channel B-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x8C++0x3 line.long 0x00 "PWM0_BL1_HP,PWM0 Channel B-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90++0x3 line.long 0x00 "PWM0_CCTL,PWM0 Channel C Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x94++0x3 line.long 0x00 "PWM0_CH0,PWM0 Channel C-High Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x98++0x3 line.long 0x00 "PWM0_CH1,PWM0 Channel C-High Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x9C++0x3 line.long 0x00 "PWM0_CH0_HP,PWM0 Channel C-High Pulse Heightened-Precision Duty Register 0" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA0++0x3 line.long 0x00 "PWM0_CH1_HP,PWM0 Channel C-High Pulse Heightened-Precision Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA4++0x3 line.long 0x00 "PWM0_CL0,PWM0 Channel C-Low Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xA8++0x3 line.long 0x00 "PWM0_CL1,PWM0 Channel C-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xAC++0x3 line.long 0x00 "PWM0_CL0_HP,PWM0 Channel C-Low Pulse Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB0++0x3 line.long 0x00 "PWM0_CL1_HP,PWM0 Channel C-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB4++0x3 line.long 0x00 "PWM0_DCTL,PWM0 Channel D Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0xB8++0x3 line.long 0x00 "PWM0_DH0,PWM0 Channel D-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xBC++0x3 line.long 0x00 "PWM0_DH1,PWM0 Channel D-High Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xC0++0x3 line.long 0x00 "PWM0_DH0_HP,PWM0 Channel D-High Pulse Heightened-Precision Duty Register 0" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC4++0x3 line.long 0x00 "PWM0_DH1_HP,PWM0 Channel D High Pulse Heightened-Precision Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC8++0x3 line.long 0x00 "PWM0_DL0,PWM0 Channel D-Low Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xCC++0x3 line.long 0x00 "PWM0_DL1,PWM0 Channel D-Low Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xD0++0x3 line.long 0x00 "PWM0_DL0_HP,PWM0 Channel D-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD4++0x3 line.long 0x00 "PWM0_DL1_HP,PWM0 Channel D-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD8++0x3 line.long 0x00 "PWM0_AH_DUTY0,PWM0 Channel A-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xDC++0x3 line.long 0x00 "PWM0_AH_DUTY1,PWM0 Channel A-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE0++0x3 line.long 0x00 "PWM0_AL_DUTY0,PWM0 Channel A-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE4++0x3 line.long 0x00 "PWM0_AL_DUTY1,PWM0 Channel A-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE8++0x3 line.long 0x00 "PWM0_BH_DUTY0,PWM0 Channel B-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xEC++0x3 line.long 0x00 "PWM0_BH_DUTY1,PWM0 Channel B-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF0++0x3 line.long 0x00 "PWM0_BL_DUTY0,PWM0 Channel B-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF4++0x3 line.long 0x00 "PWM0_BL_DUTY1,PWM0 Channel B-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF8++0x3 line.long 0x00 "PWM0_CH_DUTY0,PWM0 Channel C-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xFC++0x3 line.long 0x00 "PWM0_CH_DUTY1,PWM0 Channel C-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x100++0x3 line.long 0x00 "PWM0_CL_DUTY0,PWM0 Channel C-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x104++0x3 line.long 0x00 "PWM0_CL_DUTY1,PWM0 Channel C-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x108++0x3 line.long 0x00 "PWM0_DH_DUTY0,PWM0 Channel D-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x10C++0x3 line.long 0x00 "PWM0_DH_DUTY1,PWM0 Channel D-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x110++0x3 line.long 0x00 "PWM0_DL_DUTY0,PWM0 Channel D-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x114++0x3 line.long 0x00 "PWM0_DL_DUTY1,PWM0 Channel D-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x118++0x3 line.long 0x00 "PWM0_CHA_DT,PWM0 Channel A Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x11C++0x3 line.long 0x00 "PWM0_CHB_DT,PWM0 Channel B Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x120++0x3 line.long 0x00 "PWM0_CHC_DT,PWM0 Channel C Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x124++0x3 line.long 0x00 "PWM0_CHD_DT,PWM0 Channel D Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" tree.end tree "PWM1" base ad:0x3100A400 width 15. group.long 0x0++0x3 line.long 0x00 "PWM1_CTL,PWM1 Control Register" bitfld.long 0x00 18.--20. " INTSYNCREF ,Timer reference for Internal Sync" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17. " EXTSYNCSEL ,External Sync Select" "0,1" bitfld.long 0x00 16. " EXTSYNC ,External Sync" "0,1" bitfld.long 0x00 8. " ADEN ,Asymmetric Dead-time Enable" "0,1" newline bitfld.long 0x00 7. " DLYDEN ,Enable Delay Counter for Channel D" "0,1" bitfld.long 0x00 6. " DLYCEN ,Enable Delay Counter for Channel C" "0,1" bitfld.long 0x00 5. " DLYBEN ,Enable Delay Counter for Channel B" "0,1" bitfld.long 0x00 4. " DLYAEN ,Enable Delay Counter for Channel A" "0,1" newline bitfld.long 0x00 3. " DUEN ,Double Update Mode Enable" "0,1" bitfld.long 0x00 2. " SWTRIP ,Software Trip" "0,1" bitfld.long 0x00 1. " EMURUN ,Output Behavior During Emulation Mode" "0,1" bitfld.long 0x00 0. " GLOBEN ,Module Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "PWM1_CHANCFG,PWM1 Channel Configuration Register" bitfld.long 0x00 30. " ENCHOPDL ,Channel D Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 29. " POLDL ,Channel D low side Polarity" "0,1" bitfld.long 0x00 28. " ENHPDH ,Channel D heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 27. " ENCHOPDH ,Channel D Gate Chopping Enable High Side" "0,1" newline bitfld.long 0x00 26. " POLDH ,Channel D High side Polarity" "0,1" bitfld.long 0x00 25. " MODELSD ,Channel D Mode of low Side Output" "0,1" bitfld.long 0x00 24. " REFTMRD ,Channel D Timer Reference" "0,1" bitfld.long 0x00 22. " ENCHOPCL ,Channel C Gate Chopping Enable Low Side" "0,1" newline bitfld.long 0x00 21. " POLCL ,Channel C low side Polarity" "0,1" bitfld.long 0x00 20. " ENHPCH ,Channel C heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 19. " ENCHOPCH ,Channel C Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 18. " POLCH ,Channel C High side Polarity" "0,1" newline bitfld.long 0x00 17. " MODELSC ,Channel C Mode of low Side Output" "0,1" bitfld.long 0x00 16. " REFTMRC ,Channel C Timer Reference" "0,1" bitfld.long 0x00 14. " ENCHOPBL ,Channel B Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 13. " POLBL ,Channel B low side Polarity" "0,1" newline bitfld.long 0x00 12. " ENHPBH ,Channel B heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 11. " ENCHOPBH ,Channel B Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 10. " POLBH ,Channel B High side Polarity" "0,1" bitfld.long 0x00 9. " MODELSB ,Channel B Mode of low Side Output" "0,1" newline bitfld.long 0x00 8. " REFTMRB ,Channel B Timer Reference" "0,1" bitfld.long 0x00 6. " ENCHOPAL ,Channel A Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 5. " POLAL ,Channel A low side Polarity" "0,1" bitfld.long 0x00 4. " ENHPAH ,Channel A heightened-precision enable for high side Output" "0,1" newline bitfld.long 0x00 3. " ENCHOPAH ,Channel A Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 2. " POLAH ,Channel A High side Polarity" "0,1" bitfld.long 0x00 1. " MODELSA ,Channel A Mode of low Side Output" "0,1" bitfld.long 0x00 0. " REFTMRA ,Channel A Timer Reference" "0,1" group.long 0x8++0x3 line.long 0x00 "PWM1_TRIPCFG,PWM1 Trip Configuration Register" bitfld.long 0x00 27. " MODE1D ,Mode of TRIP1 for Channel D" "0,1" bitfld.long 0x00 26. " EN1D ,Enable TRIP1 for Channel D" "0,1" bitfld.long 0x00 25. " MODE0D ,Mode of TRIP0 for Channel D" "0,1" bitfld.long 0x00 24. " EN0D ,Enable TRIP0 for Channel D" "0,1" newline bitfld.long 0x00 19. " MODE1C ,Mode of TRIP1 for Channel C" "0,1" bitfld.long 0x00 18. " EN1C ,Enable TRIP1 as a trip source for Channel C" "0,1" bitfld.long 0x00 17. " MODE0C ,Mode of TRIP0 for Channel C" "0,1" bitfld.long 0x00 16. " EN0C ,Enable TRIP0 for Channel C" "0,1" newline bitfld.long 0x00 11. " MODE1B ,Mode of TRIP1 for Channel B" "0,1" bitfld.long 0x00 10. " EN1B ,Enable TRIP1 for Channel B" "0,1" bitfld.long 0x00 9. " MODE0B ,Mode of TRIP0 for Channel B" "0,1" bitfld.long 0x00 8. " EN0B ,Enable TRIP0 as a trip source for Channel B" "0,1" newline bitfld.long 0x00 3. " MODE1A ,Mode of TRIP1 for Channel A" "0,1" bitfld.long 0x00 2. " EN1A ,Enable TRIP1 as a trip source for Channel A" "0,1" bitfld.long 0x00 1. " MODE0A ,Mode of TRIP0 for Channel A" "0,1" bitfld.long 0x00 0. " EN0A ,Enable TRIP0 as a trip source for Channel A" "0,1" group.long 0xC++0x3 line.long 0x00 "PWM1_STAT,PWM1 Status Register" bitfld.long 0x00 31. " HPRDY ,Heightened-Precision Ready Status" "0,1" bitfld.long 0x00 28. " TMR4PHASE ,PWMTMR4 Phase Status" "0,1" bitfld.long 0x00 27. " TMR3PHASE ,PWMTMR3 Phase Status" "0,1" bitfld.long 0x00 26. " TMR2PHASE ,PWMTMR2 Phase Status" "0,1" newline bitfld.long 0x00 25. " TMR1PHASE ,PWMTMR1 Phase Status" "0,1" bitfld.long 0x00 24. " TMR0PHASE ,PWMTMR0 Phase Status" "0,1" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Boundary Status" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Boundary Status" "0,1" newline bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Boundary Status" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Boundary Status" "0,1" bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Status" "0,1" bitfld.long 0x00 11. " SRTRIPD ,Self-Restart Trip Status for Channel D" "0,1" newline bitfld.long 0x00 10. " FLTTRIPD ,Fault Trip Status for Channel D" "0,1" bitfld.long 0x00 9. " SRTRIPC ,Self-Restart Trip Status for Channel C" "0,1" bitfld.long 0x00 8. " FLTTRIPC ,Fault Trip Status for Channel C" "0,1" bitfld.long 0x00 7. " SRTRIPB ,Self-Restart Trip Status for Channel B" "0,1" newline bitfld.long 0x00 6. " FLTTRIPB ,Fault Trip Status for Channel B" "0,1" bitfld.long 0x00 5. " SRTRIPA ,Self-Restart Trip Status for Channel A" "0,1" bitfld.long 0x00 4. " FLTTRIPA ,Fault Trip Status for Channel A" "0,1" bitfld.long 0x00 3. " RAWTRIP1 ,Raw Trip 1 Status" "0,1" newline bitfld.long 0x00 2. " RAWTRIP0 ,Raw Trip 0 Status" "0,1" bitfld.long 0x00 1. " TRIP1 ,Status bit set when TRIP1 is active low" "0,1" bitfld.long 0x00 0. " TRIP0 ,Status bit set when TRIP0 is active low" "0,1" group.long 0x10++0x3 line.long 0x00 "PWM1_IMSK,PWM1 Interrupt Mask Register" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Boundary Interrupt Enable" "0,1" newline bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 1. " TRIP1 ,TRIP1 Interrupt Enable" "0,1" bitfld.long 0x00 0. " TRIP0 ,TRIP0 Interrupt Enable" "0,1" group.long 0x14++0x3 line.long 0x00 "PWM1_ILAT,PWM1 Interrupt Latch Register" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Latched Interrupt Status" "0,1" newline bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Interrupt Latched Status" "0,1" bitfld.long 0x00 1. " TRIP1 ,TRIP1 Interrupt Latched Status" "0,1" bitfld.long 0x00 0. " TRIP0 ,TRIP0 Interrupt Latched Status" "0,1" group.long 0x18++0x3 line.long 0x00 "PWM1_CHOPCFG,PWM1 Chop Configuration Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Gate Chopping Divisor" group.long 0x20++0x3 line.long 0x00 "PWM1_SYNC_WID,PWM1 Sync Pulse Width Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Sync Pulse Width" group.long 0x24++0x3 line.long 0x00 "PWM1_TM0,PWM1 Timer 0 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR0 Period Value" group.long 0x28++0x3 line.long 0x00 "PWM1_TM1,PWM1 Timer 1 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR1 Period Value" group.long 0x2C++0x3 line.long 0x00 "PWM1_TM2,PWM1 Timer 2 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR2 Period Value" group.long 0x30++0x3 line.long 0x00 "PWM1_TM3,PWM1 Timer 3 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR3 Period Value" group.long 0x34++0x3 line.long 0x00 "PWM1_TM4,PWM1 Timer 4 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR4 Period Value" group.long 0x38++0x3 line.long 0x00 "PWM1_DLYA,PWM1 Channel A Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel A Delay Value" group.long 0x3C++0x3 line.long 0x00 "PWM1_DLYB,PWM1 Channel B Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel B Delay Value" group.long 0x40++0x3 line.long 0x00 "PWM1_DLYC,PWM1 Channel C Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel C Delay Value" group.long 0x44++0x3 line.long 0x00 "PWM1_DLYD,PWM1 Channel D Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel D Delay Value" group.long 0x48++0x3 line.long 0x00 "PWM1_ACTL,PWM1 Channel A Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x4C++0x3 line.long 0x00 "PWM1_AH0,PWM1 Channel A-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x50++0x3 line.long 0x00 "PWM1_AH1,PWM1 Channel A-High Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x54++0x3 line.long 0x00 "PWM1_AH0_HP,PWM1 Channel A-High Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x58++0x3 line.long 0x00 "PWM1_AH1_HP,PWM1 Channel A-High Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x5C++0x3 line.long 0x00 "PWM1_AL0,PWM1 Channel A-Low Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x60++0x3 line.long 0x00 "PWM1_AL1,PWM1 Channel A-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x64++0x3 line.long 0x00 "PWM1_AL0_HP,PWM1 Channel A-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x68++0x3 line.long 0x00 "PWM1_AL1_HP,PWM1 Channel A-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x6C++0x3 line.long 0x00 "PWM1_BCTL,PWM1 Channel B Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x70++0x3 line.long 0x00 "PWM1_BH0,PWM1 Channel B-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x74++0x3 line.long 0x00 "PWM1_BH1,PWM1 Channel B-High Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x78++0x3 line.long 0x00 "PWM1_BH0_HP,PWM1 Channel B-High Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x7C++0x3 line.long 0x00 "PWM1_BH1_HP,PWM1 Channel B-High Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x80++0x3 line.long 0x00 "PWM1_BL0,PWM1 Channel B-Low Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x84++0x3 line.long 0x00 "PWM1_BL1,PWM1 Channel B-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x88++0x3 line.long 0x00 "PWM1_BL0_HP,PWM1 Channel B-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x8C++0x3 line.long 0x00 "PWM1_BL1_HP,PWM1 Channel B-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90++0x3 line.long 0x00 "PWM1_CCTL,PWM1 Channel C Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x94++0x3 line.long 0x00 "PWM1_CH0,PWM1 Channel C-High Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x98++0x3 line.long 0x00 "PWM1_CH1,PWM1 Channel C-High Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x9C++0x3 line.long 0x00 "PWM1_CH0_HP,PWM1 Channel C-High Pulse Heightened-Precision Duty Register 0" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA0++0x3 line.long 0x00 "PWM1_CH1_HP,PWM1 Channel C-High Pulse Heightened-Precision Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA4++0x3 line.long 0x00 "PWM1_CL0,PWM1 Channel C-Low Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xA8++0x3 line.long 0x00 "PWM1_CL1,PWM1 Channel C-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xAC++0x3 line.long 0x00 "PWM1_CL0_HP,PWM1 Channel C-Low Pulse Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB0++0x3 line.long 0x00 "PWM1_CL1_HP,PWM1 Channel C-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB4++0x3 line.long 0x00 "PWM1_DCTL,PWM1 Channel D Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0xB8++0x3 line.long 0x00 "PWM1_DH0,PWM1 Channel D-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xBC++0x3 line.long 0x00 "PWM1_DH1,PWM1 Channel D-High Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xC0++0x3 line.long 0x00 "PWM1_DH0_HP,PWM1 Channel D-High Pulse Heightened-Precision Duty Register 0" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC4++0x3 line.long 0x00 "PWM1_DH1_HP,PWM1 Channel D High Pulse Heightened-Precision Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC8++0x3 line.long 0x00 "PWM1_DL0,PWM1 Channel D-Low Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xCC++0x3 line.long 0x00 "PWM1_DL1,PWM1 Channel D-Low Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xD0++0x3 line.long 0x00 "PWM1_DL0_HP,PWM1 Channel D-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD4++0x3 line.long 0x00 "PWM1_DL1_HP,PWM1 Channel D-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD8++0x3 line.long 0x00 "PWM1_AH_DUTY0,PWM1 Channel A-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xDC++0x3 line.long 0x00 "PWM1_AH_DUTY1,PWM1 Channel A-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE0++0x3 line.long 0x00 "PWM1_AL_DUTY0,PWM1 Channel A-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE4++0x3 line.long 0x00 "PWM1_AL_DUTY1,PWM1 Channel A-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE8++0x3 line.long 0x00 "PWM1_BH_DUTY0,PWM1 Channel B-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xEC++0x3 line.long 0x00 "PWM1_BH_DUTY1,PWM1 Channel B-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF0++0x3 line.long 0x00 "PWM1_BL_DUTY0,PWM1 Channel B-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF4++0x3 line.long 0x00 "PWM1_BL_DUTY1,PWM1 Channel B-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF8++0x3 line.long 0x00 "PWM1_CH_DUTY0,PWM1 Channel C-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xFC++0x3 line.long 0x00 "PWM1_CH_DUTY1,PWM1 Channel C-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x100++0x3 line.long 0x00 "PWM1_CL_DUTY0,PWM1 Channel C-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x104++0x3 line.long 0x00 "PWM1_CL_DUTY1,PWM1 Channel C-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x108++0x3 line.long 0x00 "PWM1_DH_DUTY0,PWM1 Channel D-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x10C++0x3 line.long 0x00 "PWM1_DH_DUTY1,PWM1 Channel D-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x110++0x3 line.long 0x00 "PWM1_DL_DUTY0,PWM1 Channel D-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x114++0x3 line.long 0x00 "PWM1_DL_DUTY1,PWM1 Channel D-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x118++0x3 line.long 0x00 "PWM1_CHA_DT,PWM1 Channel A Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x11C++0x3 line.long 0x00 "PWM1_CHB_DT,PWM1 Channel B Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x120++0x3 line.long 0x00 "PWM1_CHC_DT,PWM1 Channel C Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x124++0x3 line.long 0x00 "PWM1_CHD_DT,PWM1 Channel D Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" tree.end tree "PWM2" base ad:0x3100A800 width 15. group.long 0x0++0x3 line.long 0x00 "PWM2_CTL,PWM2 Control Register" bitfld.long 0x00 18.--20. " INTSYNCREF ,Timer reference for Internal Sync" "0,1,2,3,4,5,6,7" bitfld.long 0x00 17. " EXTSYNCSEL ,External Sync Select" "0,1" bitfld.long 0x00 16. " EXTSYNC ,External Sync" "0,1" bitfld.long 0x00 8. " ADEN ,Asymmetric Dead-time Enable" "0,1" newline bitfld.long 0x00 7. " DLYDEN ,Enable Delay Counter for Channel D" "0,1" bitfld.long 0x00 6. " DLYCEN ,Enable Delay Counter for Channel C" "0,1" bitfld.long 0x00 5. " DLYBEN ,Enable Delay Counter for Channel B" "0,1" bitfld.long 0x00 4. " DLYAEN ,Enable Delay Counter for Channel A" "0,1" newline bitfld.long 0x00 3. " DUEN ,Double Update Mode Enable" "0,1" bitfld.long 0x00 2. " SWTRIP ,Software Trip" "0,1" bitfld.long 0x00 1. " EMURUN ,Output Behavior During Emulation Mode" "0,1" bitfld.long 0x00 0. " GLOBEN ,Module Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "PWM2_CHANCFG,PWM2 Channel Configuration Register" bitfld.long 0x00 30. " ENCHOPDL ,Channel D Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 29. " POLDL ,Channel D low side Polarity" "0,1" bitfld.long 0x00 28. " ENHPDH ,Channel D heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 27. " ENCHOPDH ,Channel D Gate Chopping Enable High Side" "0,1" newline bitfld.long 0x00 26. " POLDH ,Channel D High side Polarity" "0,1" bitfld.long 0x00 25. " MODELSD ,Channel D Mode of low Side Output" "0,1" bitfld.long 0x00 24. " REFTMRD ,Channel D Timer Reference" "0,1" bitfld.long 0x00 22. " ENCHOPCL ,Channel C Gate Chopping Enable Low Side" "0,1" newline bitfld.long 0x00 21. " POLCL ,Channel C low side Polarity" "0,1" bitfld.long 0x00 20. " ENHPCH ,Channel C heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 19. " ENCHOPCH ,Channel C Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 18. " POLCH ,Channel C High side Polarity" "0,1" newline bitfld.long 0x00 17. " MODELSC ,Channel C Mode of low Side Output" "0,1" bitfld.long 0x00 16. " REFTMRC ,Channel C Timer Reference" "0,1" bitfld.long 0x00 14. " ENCHOPBL ,Channel B Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 13. " POLBL ,Channel B low side Polarity" "0,1" newline bitfld.long 0x00 12. " ENHPBH ,Channel B heightened-precision enable for high side Output" "0,1" bitfld.long 0x00 11. " ENCHOPBH ,Channel B Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 10. " POLBH ,Channel B High side Polarity" "0,1" bitfld.long 0x00 9. " MODELSB ,Channel B Mode of low Side Output" "0,1" newline bitfld.long 0x00 8. " REFTMRB ,Channel B Timer Reference" "0,1" bitfld.long 0x00 6. " ENCHOPAL ,Channel A Gate Chopping Enable Low Side" "0,1" bitfld.long 0x00 5. " POLAL ,Channel A low side Polarity" "0,1" bitfld.long 0x00 4. " ENHPAH ,Channel A heightened-precision enable for high side Output" "0,1" newline bitfld.long 0x00 3. " ENCHOPAH ,Channel A Gate Chopping Enable High Side" "0,1" bitfld.long 0x00 2. " POLAH ,Channel A High side Polarity" "0,1" bitfld.long 0x00 1. " MODELSA ,Channel A Mode of low Side Output" "0,1" bitfld.long 0x00 0. " REFTMRA ,Channel A Timer Reference" "0,1" group.long 0x8++0x3 line.long 0x00 "PWM2_TRIPCFG,PWM2 Trip Configuration Register" bitfld.long 0x00 27. " MODE1D ,Mode of TRIP1 for Channel D" "0,1" bitfld.long 0x00 26. " EN1D ,Enable TRIP1 for Channel D" "0,1" bitfld.long 0x00 25. " MODE0D ,Mode of TRIP0 for Channel D" "0,1" bitfld.long 0x00 24. " EN0D ,Enable TRIP0 for Channel D" "0,1" newline bitfld.long 0x00 19. " MODE1C ,Mode of TRIP1 for Channel C" "0,1" bitfld.long 0x00 18. " EN1C ,Enable TRIP1 as a trip source for Channel C" "0,1" bitfld.long 0x00 17. " MODE0C ,Mode of TRIP0 for Channel C" "0,1" bitfld.long 0x00 16. " EN0C ,Enable TRIP0 for Channel C" "0,1" newline bitfld.long 0x00 11. " MODE1B ,Mode of TRIP1 for Channel B" "0,1" bitfld.long 0x00 10. " EN1B ,Enable TRIP1 for Channel B" "0,1" bitfld.long 0x00 9. " MODE0B ,Mode of TRIP0 for Channel B" "0,1" bitfld.long 0x00 8. " EN0B ,Enable TRIP0 as a trip source for Channel B" "0,1" newline bitfld.long 0x00 3. " MODE1A ,Mode of TRIP1 for Channel A" "0,1" bitfld.long 0x00 2. " EN1A ,Enable TRIP1 as a trip source for Channel A" "0,1" bitfld.long 0x00 1. " MODE0A ,Mode of TRIP0 for Channel A" "0,1" bitfld.long 0x00 0. " EN0A ,Enable TRIP0 as a trip source for Channel A" "0,1" group.long 0xC++0x3 line.long 0x00 "PWM2_STAT,PWM2 Status Register" bitfld.long 0x00 31. " HPRDY ,Heightened-Precision Ready Status" "0,1" bitfld.long 0x00 28. " TMR4PHASE ,PWMTMR4 Phase Status" "0,1" bitfld.long 0x00 27. " TMR3PHASE ,PWMTMR3 Phase Status" "0,1" bitfld.long 0x00 26. " TMR2PHASE ,PWMTMR2 Phase Status" "0,1" newline bitfld.long 0x00 25. " TMR1PHASE ,PWMTMR1 Phase Status" "0,1" bitfld.long 0x00 24. " TMR0PHASE ,PWMTMR0 Phase Status" "0,1" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Boundary Status" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Boundary Status" "0,1" newline bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Boundary Status" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Boundary Status" "0,1" bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Status" "0,1" bitfld.long 0x00 11. " SRTRIPD ,Self-Restart Trip Status for Channel D" "0,1" newline bitfld.long 0x00 10. " FLTTRIPD ,Fault Trip Status for Channel D" "0,1" bitfld.long 0x00 9. " SRTRIPC ,Self-Restart Trip Status for Channel C" "0,1" bitfld.long 0x00 8. " FLTTRIPC ,Fault Trip Status for Channel C" "0,1" bitfld.long 0x00 7. " SRTRIPB ,Self-Restart Trip Status for Channel B" "0,1" newline bitfld.long 0x00 6. " FLTTRIPB ,Fault Trip Status for Channel B" "0,1" bitfld.long 0x00 5. " SRTRIPA ,Self-Restart Trip Status for Channel A" "0,1" bitfld.long 0x00 4. " FLTTRIPA ,Fault Trip Status for Channel A" "0,1" bitfld.long 0x00 3. " RAWTRIP1 ,Raw Trip 1 Status" "0,1" newline bitfld.long 0x00 2. " RAWTRIP0 ,Raw Trip 0 Status" "0,1" bitfld.long 0x00 1. " TRIP1 ,Status bit set when TRIP1 is active low" "0,1" bitfld.long 0x00 0. " TRIP0 ,Status bit set when TRIP0 is active low" "0,1" group.long 0x10++0x3 line.long 0x00 "PWM2_IMSK,PWM2 Interrupt Mask Register" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Boundary Interrupt Enable" "0,1" newline bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Interrupt Enable" "0,1" bitfld.long 0x00 1. " TRIP1 ,TRIP1 Interrupt Enable" "0,1" bitfld.long 0x00 0. " TRIP0 ,TRIP0 Interrupt Enable" "0,1" group.long 0x14++0x3 line.long 0x00 "PWM2_ILAT,PWM2 Interrupt Latch Register" bitfld.long 0x00 20. " TMR4PER ,PWMTMR4 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 19. " TMR3PER ,PWMTMR3 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 18. " TMR2PER ,PWMTMR2 Period Latched Interrupt Status" "0,1" bitfld.long 0x00 17. " TMR1PER ,PWMTMR1 Period Latched Interrupt Status" "0,1" newline bitfld.long 0x00 16. " TMR0PER ,PWMTMR0 Period Boundary Interrupt Latched Status" "0,1" bitfld.long 0x00 1. " TRIP1 ,TRIP1 Interrupt Latched Status" "0,1" bitfld.long 0x00 0. " TRIP0 ,TRIP0 Interrupt Latched Status" "0,1" group.long 0x18++0x3 line.long 0x00 "PWM2_CHOPCFG,PWM2 Chop Configuration Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Gate Chopping Divisor" group.long 0x20++0x3 line.long 0x00 "PWM2_SYNC_WID,PWM2 Sync Pulse Width Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Sync Pulse Width" group.long 0x24++0x3 line.long 0x00 "PWM2_TM0,PWM2 Timer 0 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR0 Period Value" group.long 0x28++0x3 line.long 0x00 "PWM2_TM1,PWM2 Timer 1 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR1 Period Value" group.long 0x2C++0x3 line.long 0x00 "PWM2_TM2,PWM2 Timer 2 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR2 Period Value" group.long 0x30++0x3 line.long 0x00 "PWM2_TM3,PWM2 Timer 3 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR3 Period Value" group.long 0x34++0x3 line.long 0x00 "PWM2_TM4,PWM2 Timer 4 Period Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Timer PWMTMR4 Period Value" group.long 0x38++0x3 line.long 0x00 "PWM2_DLYA,PWM2 Channel A Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel A Delay Value" group.long 0x3C++0x3 line.long 0x00 "PWM2_DLYB,PWM2 Channel B Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel B Delay Value" group.long 0x40++0x3 line.long 0x00 "PWM2_DLYC,PWM2 Channel C Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel C Delay Value" group.long 0x44++0x3 line.long 0x00 "PWM2_DLYD,PWM2 Channel D Delay Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Channel D Delay Value" group.long 0x48++0x3 line.long 0x00 "PWM2_ACTL,PWM2 Channel A Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x4C++0x3 line.long 0x00 "PWM2_AH0,PWM2 Channel A-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x50++0x3 line.long 0x00 "PWM2_AH1,PWM2 Channel A-High Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x54++0x3 line.long 0x00 "PWM2_AH0_HP,PWM2 Channel A-High Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x58++0x3 line.long 0x00 "PWM2_AH1_HP,PWM2 Channel A-High Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x5C++0x3 line.long 0x00 "PWM2_AL0,PWM2 Channel A-Low Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x60++0x3 line.long 0x00 "PWM2_AL1,PWM2 Channel A-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x64++0x3 line.long 0x00 "PWM2_AL0_HP,PWM2 Channel A-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x68++0x3 line.long 0x00 "PWM2_AL1_HP,PWM2 Channel A-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x6C++0x3 line.long 0x00 "PWM2_BCTL,PWM2 Channel B Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x70++0x3 line.long 0x00 "PWM2_BH0,PWM2 Channel B-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x74++0x3 line.long 0x00 "PWM2_BH1,PWM2 Channel B-High Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x78++0x3 line.long 0x00 "PWM2_BH0_HP,PWM2 Channel B-High Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x7C++0x3 line.long 0x00 "PWM2_BH1_HP,PWM2 Channel B-High Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x80++0x3 line.long 0x00 "PWM2_BL0,PWM2 Channel B-Low Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x84++0x3 line.long 0x00 "PWM2_BL1,PWM2 Channel B-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x88++0x3 line.long 0x00 "PWM2_BL0_HP,PWM2 Channel B-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x8C++0x3 line.long 0x00 "PWM2_BL1_HP,PWM2 Channel B-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x90++0x3 line.long 0x00 "PWM2_CCTL,PWM2 Channel C Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0x94++0x3 line.long 0x00 "PWM2_CH0,PWM2 Channel C-High Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0x98++0x3 line.long 0x00 "PWM2_CH1,PWM2 Channel C-High Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0x9C++0x3 line.long 0x00 "PWM2_CH0_HP,PWM2 Channel C-High Pulse Heightened-Precision Duty Register 0" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA0++0x3 line.long 0x00 "PWM2_CH1_HP,PWM2 Channel C-High Pulse Heightened-Precision Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xA4++0x3 line.long 0x00 "PWM2_CL0,PWM2 Channel C-Low Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xA8++0x3 line.long 0x00 "PWM2_CL1,PWM2 Channel C-Low Duty-1 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xAC++0x3 line.long 0x00 "PWM2_CL0_HP,PWM2 Channel C-Low Pulse Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB0++0x3 line.long 0x00 "PWM2_CL1_HP,PWM2 Channel C-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xB4++0x3 line.long 0x00 "PWM2_DCTL,PWM2 Channel D Control Register" bitfld.long 0x00 10.--11. " PULSEMODELO ,Low Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 8.--9. " PULSEMODEHI ,High Side Output Pulse Position" "0,1,2,3" bitfld.long 0x00 2. " XOVR ,high-low Crossover Enable" "0,1" bitfld.long 0x00 1. " DISLO ,Channel Low Side Output Disable" "0,1" newline bitfld.long 0x00 0. " DISHI ,Channel High Side Output Disable" "0,1" group.long 0xB8++0x3 line.long 0x00 "PWM2_DH0,PWM2 Channel D-High Duty-0 Register" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xBC++0x3 line.long 0x00 "PWM2_DH1,PWM2 Channel D-High Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xC0++0x3 line.long 0x00 "PWM2_DH0_HP,PWM2 Channel D-High Pulse Heightened-Precision Duty Register 0" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC4++0x3 line.long 0x00 "PWM2_DH1_HP,PWM2 Channel D High Pulse Heightened-Precision Duty Register 1" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xC8++0x3 line.long 0x00 "PWM2_DL0,PWM2 Channel D-Low Pulse Duty Register 0" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle Asserted Count" group.long 0xCC++0x3 line.long 0x00 "PWM2_DL1,PWM2 Channel D-Low Pulse Duty Register 1" hexmask.long.word 0x00 0.--15. 1. " DUTY ,Duty Cycle De-Asserted Count" group.long 0xD0++0x3 line.long 0x00 "PWM2_DL0_HP,PWM2 Channel D-Low Heightened-Precision Duty-0 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD4++0x3 line.long 0x00 "PWM2_DL1_HP,PWM2 Channel D-Low Heightened-Precision Duty-1 Register" bitfld.long 0x00 6.--7. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" bitfld.long 0x00 0.--5. " MAXDIV ,Maximum Precision Supplementary Divider Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0xD8++0x3 line.long 0x00 "PWM2_AH_DUTY0,PWM2 Channel A-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xDC++0x3 line.long 0x00 "PWM2_AH_DUTY1,PWM2 Channel A-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE0++0x3 line.long 0x00 "PWM2_AL_DUTY0,PWM2 Channel A-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE4++0x3 line.long 0x00 "PWM2_AL_DUTY1,PWM2 Channel A-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xE8++0x3 line.long 0x00 "PWM2_BH_DUTY0,PWM2 Channel B-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xEC++0x3 line.long 0x00 "PWM2_BH_DUTY1,PWM2 Channel B-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF0++0x3 line.long 0x00 "PWM2_BL_DUTY0,PWM2 Channel B-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF4++0x3 line.long 0x00 "PWM2_BL_DUTY1,PWM2 Channel B-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xF8++0x3 line.long 0x00 "PWM2_CH_DUTY0,PWM2 Channel C-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0xFC++0x3 line.long 0x00 "PWM2_CH_DUTY1,PWM2 Channel C-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x100++0x3 line.long 0x00 "PWM2_CL_DUTY0,PWM2 Channel C-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x104++0x3 line.long 0x00 "PWM2_CL_DUTY1,PWM2 Channel C-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x108++0x3 line.long 0x00 "PWM2_DH_DUTY0,PWM2 Channel D-High Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x10C++0x3 line.long 0x00 "PWM2_DH_DUTY1,PWM2 Channel D-High Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x110++0x3 line.long 0x00 "PWM2_DL_DUTY0,PWM2 Channel D-Low Full Duty0 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x114++0x3 line.long 0x00 "PWM2_DL_DUTY1,PWM2 Channel D-Low Full Duty1 Register" hexmask.long.word 0x00 16.--31. 1. " DUTY ,Coarse Duty Value" bitfld.long 0x00 14.--15. " ENHDIV ,Enhanced Precision Divider Bits" "0,1,2,3" group.long 0x118++0x3 line.long 0x00 "PWM2_CHA_DT,PWM2 Channel A Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x11C++0x3 line.long 0x00 "PWM2_CHB_DT,PWM2 Channel B Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x120++0x3 line.long 0x00 "PWM2_CHC_DT,PWM2 Channel C Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" group.long 0x124++0x3 line.long 0x00 "PWM2_CHD_DT,PWM2 Channel D Dead-time Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Dead-time value" tree.end tree.end tree "RCU (Reset Control Unit)" base ad:0x3108B000 width 16. group.long 0x0++0x3 line.long 0x00 "RCU0_CTL,RCU0 Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 9. " CRSTREQEN ,Core Reset Request Enabled" "0,1" bitfld.long 0x00 8. " SRSTREQEN ,System Reset Request Enabled" "0,1" bitfld.long 0x00 2. " RSTOUTDSRT ,Reset Out Deassert" "0,1" newline bitfld.long 0x00 1. " RSTOUTASRT ,Reset Out Assert" "0,1" bitfld.long 0x00 0. " SYSRST ,System Reset" "0,1" group.long 0x4++0x3 line.long 0x00 "RCU0_STAT,RCU0 Status Register" bitfld.long 0x00 18. " RSTOUTERR ,Reset Out Error" "0,1" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADDRERR ,Address Error" "0,1" bitfld.long 0x00 8.--11. " BMODE ,Boot Mode" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 5. " RSTOUT ,Reset Out Status" "0,1" bitfld.long 0x00 3. " SWRST ,Software Reset" "0,1" bitfld.long 0x00 2. " SSRST ,System Source Reset" "0,1" bitfld.long 0x00 0. " HWRST ,Hardware Reset" "0,1" group.long 0x8++0x3 line.long 0x00 "RCU0_CRCTL,RCU0 Core Reset Outputs Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 2. " CR2 ,Core Reset Outputs" "0,1" bitfld.long 0x00 1. " CR1 ,Core Reset Outputs" "0,1" bitfld.long 0x00 0. " CR0 ,Core Reset Outputs" "0,1" group.long 0xC++0x3 line.long 0x00 "RCU0_CRSTAT,RCU0 Core Reset Outputs Status Register" bitfld.long 0x00 2. " CR2 ,Core Reset Outputs" "0,1" bitfld.long 0x00 1. " CR1 ,Core Reset Outputs" "0,1" bitfld.long 0x00 0. " CR0 ,Core Reset Outputs" "0,1" group.long 0x10++0x3 line.long 0x00 "RCU0_SIDIS,RCU0 System Interface Disable Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 1. " SI1 ,System Interface Disable Request [1:0]" "0,1" bitfld.long 0x00 0. " SI0 ,System Interface Disable Request [1:0]" "0,1" group.long 0x14++0x3 line.long 0x00 "RCU0_SISTAT,RCU0 System Interface Status Register" bitfld.long 0x00 1. " SI1 ,System Interface Disable Acknowledge [1:0]" "0,1" bitfld.long 0x00 0. " SI0 ,System Interface Disable Acknowledge [1:0]" "0,1" group.long 0x18++0x3 line.long 0x00 "RCU0_SVECT_LCK,RCU0 SVECT Lock Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 2. " SVECT2 ,Lock SVECTn Registers" "0,1" bitfld.long 0x00 1. " SVECT1 ,Lock SVECTn Registers" "0,1" bitfld.long 0x00 0. " SVECT0 ,Lock SVECTn Registers" "0,1" group.long 0x1C++0x3 line.long 0x00 "RCU0_BCODE,RCU0 Boot Code Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 18. " NOCORE2 ,No Core 2 Present" "0,1" bitfld.long 0x00 17. " NOCORE1 ,No Core 1 Present" "0,1" bitfld.long 0x00 16. " NOCORE0 ,No Core 0 Present" "0,1" newline bitfld.long 0x00 13. " IDLEONENTRY ,Idle On Entry" "0,1" bitfld.long 0x00 12. " NOL2CONFIG ,No L2 Configuration" "0,1" bitfld.long 0x00 10. " NOHOOK ,No Hook" "0,1" bitfld.long 0x00 9. " NOPREBOOT ,No Preboot" "0,1" newline bitfld.long 0x00 6. " NOFAULTS ,No Faults" "0,1" bitfld.long 0x00 5. " NOCACHE ,No Cache" "0,1" bitfld.long 0x00 4. " NOMEMINIT ,No Memory Initialization" "0,1" bitfld.long 0x00 3. " HBTOVW ,Execute Wakeup" "0,1" newline bitfld.long 0x00 2. " HALT ,Halt" "0,1" bitfld.long 0x00 1. " NOVECTINIT ,No Vector Initialize" "0,1" bitfld.long 0x00 0. " NOKERNEL ,No Boot Kernel" "0,1" group.long 0x20++0x3 line.long 0x00 "RCU0_SVECT0,RCU0 Software Vector Register 0" group.long 0x24++0x3 line.long 0x00 "RCU0_SVECT1,RCU0 Software Vector Register 1" group.long 0x28++0x3 line.long 0x00 "RCU0_SVECT2,RCU0 Software Vector Register 2" group.long 0x60++0x3 line.long 0x00 "RCU0_MSG,RCU0 Message Register" bitfld.long 0x00 31. " CALLERR ,Call Error Flag" "0,1" bitfld.long 0x00 30. " CALLBACK ,Callback Call Flag" "0,1" bitfld.long 0x00 29. " CALLINIT ,Call Initcode Flag" "0,1" bitfld.long 0x00 28. " CALLAPP ,Call Application Flag" "0,1" newline bitfld.long 0x00 27. " HALTONERR ,Halt on Error Call" "0,1" bitfld.long 0x00 26. " HALTONCALL ,Halt on Callback Call" "0,1" bitfld.long 0x00 25. " HALTONINIT ,Halt on Initcode Call" "0,1" bitfld.long 0x00 24. " HALTONAPP ,Halt on Application Call" "0,1" newline bitfld.long 0x00 22. " L2INIT ,L2 Initialized" "0,1" bitfld.long 0x00 21. " SECINIT ,SEC Initialized" "0,1" bitfld.long 0x00 20. " C2ACTIVATE ,Core 2 Activated" "0,1" bitfld.long 0x00 19. " C1ACTIVATE ,Core 1 Activated" "0,1" newline bitfld.long 0x00 18. " C2L1INIT ,Core 2 L1 Initialized" "0,1" bitfld.long 0x00 17. " C1L1INIT ,Core 1 L1 Initialized" "0,1" bitfld.long 0x00 16. " C0L1INIT ,Core 0 L1 Initialized" "0,1" bitfld.long 0x00 10. " C2IDLE ,Core 2 Idle" "0,1" newline bitfld.long 0x00 9. " C1IDLE ,Core 1 Idle" "0,1" bitfld.long 0x00 8. " C0IDLE ,Core 0 Idle" "0,1" hexmask.long.byte 0x00 0.--7. 1. " ERRCODE ,ROM Error Code" group.long 0x64++0x3 line.long 0x00 "RCU0_MSG_SET,RCU0 Message Set Bits Register" bitfld.long 0x00 31. " SET31 ,Set Message Bits" "0,1" bitfld.long 0x00 30. " SET30 ,Set Message Bits" "0,1" bitfld.long 0x00 29. " SET29 ,Set Message Bits" "0,1" bitfld.long 0x00 28. " SET28 ,Set Message Bits" "0,1" newline bitfld.long 0x00 27. " SET27 ,Set Message Bits" "0,1" bitfld.long 0x00 26. " SET26 ,Set Message Bits" "0,1" bitfld.long 0x00 25. " SET25 ,Set Message Bits" "0,1" bitfld.long 0x00 24. " SET24 ,Set Message Bits" "0,1" newline bitfld.long 0x00 23. " SET23 ,Set Message Bits" "0,1" bitfld.long 0x00 22. " SET22 ,Set Message Bits" "0,1" bitfld.long 0x00 21. " SET21 ,Set Message Bits" "0,1" bitfld.long 0x00 20. " SET20 ,Set Message Bits" "0,1" newline bitfld.long 0x00 19. " SET19 ,Set Message Bits" "0,1" bitfld.long 0x00 18. " SET18 ,Set Message Bits" "0,1" bitfld.long 0x00 17. " SET17 ,Set Message Bits" "0,1" bitfld.long 0x00 16. " SET16 ,Set Message Bits" "0,1" newline bitfld.long 0x00 15. " SET15 ,Set Message Bits" "0,1" bitfld.long 0x00 14. " SET14 ,Set Message Bits" "0,1" bitfld.long 0x00 13. " SET13 ,Set Message Bits" "0,1" bitfld.long 0x00 12. " SET12 ,Set Message Bits" "0,1" newline bitfld.long 0x00 11. " SET11 ,Set Message Bits" "0,1" bitfld.long 0x00 10. " SET10 ,Set Message Bits" "0,1" bitfld.long 0x00 9. " SET9 ,Set Message Bits" "0,1" bitfld.long 0x00 8. " SET8 ,Set Message Bits" "0,1" newline bitfld.long 0x00 7. " SET7 ,Set Message Bits" "0,1" bitfld.long 0x00 6. " SET6 ,Set Message Bits" "0,1" bitfld.long 0x00 5. " SET5 ,Set Message Bits" "0,1" bitfld.long 0x00 4. " SET4 ,Set Message Bits" "0,1" newline bitfld.long 0x00 3. " SET3 ,Set Message Bits" "0,1" bitfld.long 0x00 2. " SET2 ,Set Message Bits" "0,1" bitfld.long 0x00 1. " SET1 ,Set Message Bits" "0,1" bitfld.long 0x00 0. " SET0 ,Set Message Bits" "0,1" group.long 0x68++0x3 line.long 0x00 "RCU0_MSG_CLR,RCU0 Message Clear Bits Register" bitfld.long 0x00 31. " CLR31 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 30. " CLR30 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 29. " CLR29 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 28. " CLR28 ,Clear MSG Register Bits" "0,1" newline bitfld.long 0x00 27. " CLR27 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 26. " CLR26 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 25. " CLR25 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 24. " CLR24 ,Clear MSG Register Bits" "0,1" newline bitfld.long 0x00 23. " CLR23 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 22. " CLR22 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 21. " CLR21 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 20. " CLR20 ,Clear MSG Register Bits" "0,1" newline bitfld.long 0x00 19. " CLR19 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 18. " CLR18 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 17. " CLR17 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 16. " CLR16 ,Clear MSG Register Bits" "0,1" newline bitfld.long 0x00 15. " CLR15 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 14. " CLR14 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 13. " CLR13 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 12. " CLR12 ,Clear MSG Register Bits" "0,1" newline bitfld.long 0x00 11. " CLR11 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 10. " CLR10 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 9. " CLR9 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 8. " CLR8 ,Clear MSG Register Bits" "0,1" newline bitfld.long 0x00 7. " CLR7 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 6. " CLR6 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 5. " CLR5 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 4. " CLR4 ,Clear MSG Register Bits" "0,1" newline bitfld.long 0x00 3. " CLR3 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 2. " CLR2 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 1. " CLR1 ,Clear MSG Register Bits" "0,1" bitfld.long 0x00 0. " CLR0 ,Clear MSG Register Bits" "0,1" tree.end sif !cpuis("ADSP-SC584")&&!cpuis("ADSP-SC584W") tree "RTC (Real Time Clock)" base ad:0x310C8000 width 15. group.long 0x0++0x3 line.long 0x00 "RTC0_CLK,RTC0 RTC Clock Register" hexmask.long.word 0x00 17.--31. 1. " DAY ,Day Count" bitfld.long 0x00 12.--16. " HOUR ,Hour Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6.--11. " MIN ,Minute Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. " SEC ,Second Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x4++0x3 line.long 0x00 "RTC0_ALM,RTC0 RTC Alarm Register" hexmask.long.word 0x00 17.--31. 1. " DAY ,Alarm Day" bitfld.long 0x00 12.--16. " HOUR ,Alarm Hour" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 6.--11. " MIN ,Alarm Minute" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--5. " SEC ,Alarm Second" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" group.long 0x8++0x3 line.long 0x00 "RTC0_IEN,RTC0 Interrupt Enable Register" bitfld.long 0x00 9. " EMUDIS ,Emulator Mode Interrupt Disable" "0,1" bitfld.long 0x00 8. " CLKFAIL ,Clock Fail Interrupt Enable" "0,1" bitfld.long 0x00 7. " SW ,Stopwatch Interrupt Enable" "0,1" bitfld.long 0x00 6. " DAYALM ,Day Alarm Interrupt Enable" "0,1" newline bitfld.long 0x00 5. " ALM ,Alarm Interrupt Enable" "0,1" bitfld.long 0x00 4. " DAY ,Days Interrupt Enable" "0,1" bitfld.long 0x00 3. " HOUR ,Hours Interrupt Enable" "0,1" bitfld.long 0x00 2. " MIN ,Minutes Interrupt Enable" "0,1" newline bitfld.long 0x00 1. " SEC ,Seconds Interrupt Enable" "0,1" bitfld.long 0x00 0. " WRDONE ,Register Write Done Interrupt Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "RTC0_STAT,RTC0 RTC Status Register" bitfld.long 0x00 10. " WRZONE ,Write to RTC" "0,1" bitfld.long 0x00 9. " CLKFAIL ,RTC Clock fail" "0,1" bitfld.long 0x00 8. " SWEXP ,Stop Watch Expiry" "0,1" bitfld.long 0x00 7. " DAYALM ,Day Alarm" "0,1" newline bitfld.long 0x00 6. " ALM ,Alarm Flag" "0,1" bitfld.long 0x00 5. " DAY ,Day event" "0,1" bitfld.long 0x00 4. " HOUR ,Hour event" "0,1" bitfld.long 0x00 3. " MIN ,Minute event" "0,1" newline bitfld.long 0x00 2. " SEC ,Second event" "0,1" bitfld.long 0x00 1. " WRDONE ,Write Done" "0,1" bitfld.long 0x00 0. " WRPEND ,Write Pending" "0,1" group.long 0x10++0x3 line.long 0x00 "RTC0_STPWTCH,RTC0 RTC Stop Watch Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Stop Watch Value" group.long 0x18++0x3 line.long 0x00 "RTC0_INIT,RTC0 RTC Initialization Register" bitfld.long 0x00 5. " RDEN ,Enable Output Bus" "0,1" bitfld.long 0x00 4. " PWDN ,RTC Power Down" "0,1" bitfld.long 0x00 0.--3. " CAL ,Time Calibration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C++0x3 line.long 0x00 "RTC0_INITSTAT,RTC0 RTC Initialization Status Register" bitfld.long 0x00 3.--6. " CAL ,Calibration Status" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " PWDN ,Status of Power Down" "0,1" bitfld.long 0x00 1. " DAYALMPND ,Day Alarm Pending" "0,1" bitfld.long 0x00 0. " ALMPND ,Alarm Pending" "0,1" tree.end endif tree "SCB (System Crossbars)" tree "SCB0" base ad:0x30042100 width 17. group.long 0x0++0x3 line.long 0x00 "SCB0_MST0_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4++0x3 line.long 0x00 "SCB0_MST0_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1000++0x3 line.long 0x00 "SCB0_MST1_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1004++0x3 line.long 0x00 "SCB0_MST1_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2000++0x3 line.long 0x00 "SCB0_MST2_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2004++0x3 line.long 0x00 "SCB0_MST2_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3000++0x3 line.long 0x00 "SCB0_MST3_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3004++0x3 line.long 0x00 "SCB0_MST3_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4000++0x3 line.long 0x00 "SCB0_MST4_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x4004++0x3 line.long 0x00 "SCB0_MST4_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x5000++0x3 line.long 0x00 "SCB0_MST5_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x5004++0x3 line.long 0x00 "SCB0_MST5_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x6000++0x3 line.long 0x00 "SCB0_MST6_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x6004++0x3 line.long 0x00 "SCB0_MST6_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x7000++0x3 line.long 0x00 "SCB0_MST7_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x7004++0x3 line.long 0x00 "SCB0_MST7_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8000++0x3 line.long 0x00 "SCB0_MST8_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x8004++0x3 line.long 0x00 "SCB0_MST8_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x9000++0x3 line.long 0x00 "SCB0_MST9_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x9004++0x3 line.long 0x00 "SCB0_MST9_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA000++0x3 line.long 0x00 "SCB0_MST10_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA004++0x3 line.long 0x00 "SCB0_MST10_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB000++0x3 line.long 0x00 "SCB0_MST11_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xB004++0x3 line.long 0x00 "SCB0_MST11_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xC000++0x3 line.long 0x00 "SCB0_MST12_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xC004++0x3 line.long 0x00 "SCB0_MST12_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xD000++0x3 line.long 0x00 "SCB0_MST13_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xD004++0x3 line.long 0x00 "SCB0_MST13_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xE000++0x3 line.long 0x00 "SCB0_MST14_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xE004++0x3 line.long 0x00 "SCB0_MST14_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xF000++0x3 line.long 0x00 "SCB0_MST15_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xF004++0x3 line.long 0x00 "SCB0_MST15_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x10000++0x3 line.long 0x00 "SCB0_MST16_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x10004++0x3 line.long 0x00 "SCB0_MST16_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x11000++0x3 line.long 0x00 "SCB0_MST17_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x11004++0x3 line.long 0x00 "SCB0_MST17_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x12000++0x3 line.long 0x00 "SCB0_MST18_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x12004++0x3 line.long 0x00 "SCB0_MST18_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13000++0x3 line.long 0x00 "SCB0_MST19_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x13004++0x3 line.long 0x00 "SCB0_MST19_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x14000++0x3 line.long 0x00 "SCB0_MST20_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x14004++0x3 line.long 0x00 "SCB0_MST20_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x15000++0x3 line.long 0x00 "SCB0_MST21_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x15004++0x3 line.long 0x00 "SCB0_MST21_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x16000++0x3 line.long 0x00 "SCB0_MST22_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x16004++0x3 line.long 0x00 "SCB0_MST22_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x17000++0x3 line.long 0x00 "SCB0_MST23_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x17004++0x3 line.long 0x00 "SCB0_MST23_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18000++0x3 line.long 0x00 "SCB0_MST24_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x18004++0x3 line.long 0x00 "SCB0_MST24_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x19000++0x3 line.long 0x00 "SCB0_MST25_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x19004++0x3 line.long 0x00 "SCB0_MST25_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1A000++0x3 line.long 0x00 "SCB0_MST26_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1A004++0x3 line.long 0x00 "SCB0_MST26_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1B000++0x3 line.long 0x00 "SCB0_MST27_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1B004++0x3 line.long 0x00 "SCB0_MST27_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C000++0x3 line.long 0x00 "SCB0_MST28_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1C004++0x3 line.long 0x00 "SCB0_MST28_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1D000++0x3 line.long 0x00 "SCB0_MST29_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1D004++0x3 line.long 0x00 "SCB0_MST29_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1E000++0x3 line.long 0x00 "SCB0_MST30_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1E004++0x3 line.long 0x00 "SCB0_MST30_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1F000++0x3 line.long 0x00 "SCB0_MST31_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x1F004++0x3 line.long 0x00 "SCB0_MST31_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20000++0x3 line.long 0x00 "SCB0_MST32_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x20004++0x3 line.long 0x00 "SCB0_MST32_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x21000++0x3 line.long 0x00 "SCB0_MST33_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x21004++0x3 line.long 0x00 "SCB0_MST33_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x22000++0x3 line.long 0x00 "SCB0_MST34_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x22004++0x3 line.long 0x00 "SCB0_MST34_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x23000++0x3 line.long 0x00 "SCB0_MST35_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x23004++0x3 line.long 0x00 "SCB0_MST35_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24000++0x3 line.long 0x00 "SCB0_MST36_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x24004++0x3 line.long 0x00 "SCB0_MST36_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x25000++0x3 line.long 0x00 "SCB0_MST37_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x25004++0x3 line.long 0x00 "SCB0_MST37_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x26000++0x3 line.long 0x00 "SCB0_MST38_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x26004++0x3 line.long 0x00 "SCB0_MST38_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x27000++0x3 line.long 0x00 "SCB0_MST39_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x27004++0x3 line.long 0x00 "SCB0_MST39_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x28000++0x3 line.long 0x00 "SCB0_MST40_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x28004++0x3 line.long 0x00 "SCB0_MST40_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x29000++0x3 line.long 0x00 "SCB0_MST41_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x29004++0x3 line.long 0x00 "SCB0_MST41_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2A000++0x3 line.long 0x00 "SCB0_MST42_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2A004++0x3 line.long 0x00 "SCB0_MST42_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2B000++0x3 line.long 0x00 "SCB0_MST43_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2B004++0x3 line.long 0x00 "SCB0_MST43_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2C000++0x3 line.long 0x00 "SCB0_MST44_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2C004++0x3 line.long 0x00 "SCB0_MST44_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D000++0x3 line.long 0x00 "SCB0_MST45_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2D004++0x3 line.long 0x00 "SCB0_MST45_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2E000++0x3 line.long 0x00 "SCB0_MST46_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2E004++0x3 line.long 0x00 "SCB0_MST46_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2F000++0x3 line.long 0x00 "SCB0_MST47_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x2F004++0x3 line.long 0x00 "SCB0_MST47_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x30000++0x3 line.long 0x00 "SCB0_MST48_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x30004++0x3 line.long 0x00 "SCB0_MST48_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x31000++0x3 line.long 0x00 "SCB0_MST49_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x31004++0x3 line.long 0x00 "SCB0_MST49_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x32000++0x3 line.long 0x00 "SCB0_MST50_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x32004++0x3 line.long 0x00 "SCB0_MST50_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x33000++0x3 line.long 0x00 "SCB0_MST51_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x33004++0x3 line.long 0x00 "SCB0_MST51_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x34000++0x3 line.long 0x00 "SCB0_MST52_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x34004++0x3 line.long 0x00 "SCB0_MST52_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x35000++0x3 line.long 0x00 "SCB0_MST53_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x35004++0x3 line.long 0x00 "SCB0_MST53_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x36000++0x3 line.long 0x00 "SCB0_MST54_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x36004++0x3 line.long 0x00 "SCB0_MST54_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x37000++0x3 line.long 0x00 "SCB0_MST55_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x37004++0x3 line.long 0x00 "SCB0_MST55_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x38000++0x3 line.long 0x00 "SCB0_MST56_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x38004++0x3 line.long 0x00 "SCB0_MST56_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x39000++0x3 line.long 0x00 "SCB0_MST57_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x39004++0x3 line.long 0x00 "SCB0_MST57_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3A000++0x3 line.long 0x00 "SCB0_MST58_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3A004++0x3 line.long 0x00 "SCB0_MST58_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3B000++0x3 line.long 0x00 "SCB0_MST59_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3B004++0x3 line.long 0x00 "SCB0_MST59_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3C000++0x3 line.long 0x00 "SCB0_MST60_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3C004++0x3 line.long 0x00 "SCB0_MST60_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3D000++0x3 line.long 0x00 "SCB0_MST61_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3D004++0x3 line.long 0x00 "SCB0_MST61_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3E000++0x3 line.long 0x00 "SCB0_MST62_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3E004++0x3 line.long 0x00 "SCB0_MST62_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3F000++0x3 line.long 0x00 "SCB0_MST63_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x3F004++0x3 line.long 0x00 "SCB0_MST63_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40000++0x3 line.long 0x00 "SCB0_MST64_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x40004++0x3 line.long 0x00 "SCB0_MST64_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x41000++0x3 line.long 0x00 "SCB0_MST65_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x41004++0x3 line.long 0x00 "SCB0_MST65_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x42000++0x3 line.long 0x00 "SCB0_MST66_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x42004++0x3 line.long 0x00 "SCB0_MST66_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x43000++0x3 line.long 0x00 "SCB0_MST67_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x43004++0x3 line.long 0x00 "SCB0_MST67_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x44000++0x3 line.long 0x00 "SCB0_MST68_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x44004++0x3 line.long 0x00 "SCB0_MST68_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x45000++0x3 line.long 0x00 "SCB0_MST69_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x45004++0x3 line.long 0x00 "SCB0_MST69_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x46000++0x3 line.long 0x00 "SCB0_MST70_RQOS,SCB0 Read Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Read Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x46004++0x3 line.long 0x00 "SCB0_MST70_WQOS,SCB0 Write Quality of Service for Master n" bitfld.long 0x00 0.--3. " VALUE ,Write Quality of Service" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree "SCB1" base ad:0x30200020 width 17. group.long 0x0++0x3 line.long 0x00 "SCB1_MST00_SYNC,SCB1 Mst00 Interface Block Sync Mode" bitfld.long 0x00 0.--2. " VALUE ,SYNC Mode" "0,1,2,3,4,5,6,7" tree.end tree "SCB2" base ad:0x30300020 width 17. group.long 0x0++0x3 line.long 0x00 "SCB2_MST00_SYNC,SCB2 Mst00 Interface Block Sync Mode" bitfld.long 0x00 0.--2. " VALUE ,SYNC Mode" "0,1,2,3,4,5,6,7" tree.end tree "SCB3" base ad:0x30105020 width 20. group.long 0x0++0x3 line.long 0x00 "SCB3_MST00_SYNC,SCB3 SYNC Mode" bitfld.long 0x00 0.--2. " VALUE ,Sync Mode" "0,1,2,3,4,5,6,7" group.long 0x20++0x3 line.long 0x00 "SCB3_DCLK0_WR_TIDE,SCB3 DCLK0 Interface Block APB WR Tidemark" bitfld.long 0x00 0.--3. " VALUE ,Wr Tidemark" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" tree.end tree.end tree "SEC (System Interrupts and Triggers)" base ad:0x31089000 width 17. group.long 0x0++0x3 line.long 0x00 "SEC0_GCTL,SEC0 Global Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 1. " RESET ,Reset" "0,1" bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SEC0_GSTAT,SEC0 Global Status Register" bitfld.long 0x00 31. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 30. " ADRERR ,Address Error" "0,1" hexmask.long.byte 0x00 16.--23. 1. " SID ,Source ID for SSI Error" bitfld.long 0x00 8.--11. " SCI ,SCI ID for SCI Error" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" newline bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8++0x3 line.long 0x00 "SEC0_RAISE,SEC0 Global Raise Register" hexmask.long.byte 0x00 0.--7. 1. " SID ,Source ID" group.long 0xC++0x3 line.long 0x00 "SEC0_END,SEC0 Global End Register" hexmask.long.byte 0x00 0.--7. 1. " SID ,Source ID IRQ to End" group.long 0x10++0x3 line.long 0x00 "SEC0_FCTL,SEC0 Fault Control Register" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 13. " TES ,Trigger Event Select" "0,1" bitfld.long 0x00 12. " CMS ,COP Mode Select" "0,1" bitfld.long 0x00 7. " FIEN ,Fault Input Enable" "0,1" newline bitfld.long 0x00 6. " SREN ,System Reset Enable" "0,1" bitfld.long 0x00 5. " TOEN ,Trigger Output Enable" "0,1" bitfld.long 0x00 4. " FOEN ,Fault Output Enable" "0,1" bitfld.long 0x00 1. " RESET ,Reset" "0,1" newline bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x14++0x3 line.long 0x00 "SEC0_FSTAT,SEC0 Fault Status Register" bitfld.long 0x00 10. " NPND ,Next Pending Fault" "0,1" bitfld.long 0x00 9. " ACT ,Fault Active" "0,1" bitfld.long 0x00 8. " PND ,Pending Fault" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x18++0x3 line.long 0x00 "SEC0_FSID,SEC0 Fault Source ID Register" bitfld.long 0x00 16. " FEXT ,Fault External" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SID ,Source ID" group.long 0x1C++0x3 line.long 0x00 "SEC0_FEND,SEC0 Fault End Register" bitfld.long 0x00 16. " FEXT ,Fault External" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SID ,Source ID" group.long 0x20++0x3 line.long 0x00 "SEC0_FDLY,SEC0 Fault Delay Register" group.long 0x24++0x3 line.long 0x00 "SEC0_FDLY_CUR,SEC0 Fault Delay Current Register" group.long 0x28++0x3 line.long 0x00 "SEC0_FSRDLY,SEC0 Fault System Reset Delay Register" group.long 0x2C++0x3 line.long 0x00 "SEC0_FSRDLY_CUR,SEC0 Fault System Reset Delay Current Register" group.long 0x30++0x3 line.long 0x00 "SEC0_FCOPP,SEC0 Fault COP Period Register" group.long 0x34++0x3 line.long 0x00 "SEC0_FCOPP_CUR,SEC0 Fault COP Period Current Register" group.long 0x440++0x3 line.long 0x00 "SEC0_CCTL1,SEC0 SCI Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 16. " NMIEN ,NMI Enable" "0,1" bitfld.long 0x00 12. " WFI ,Wait For Idle" "0,1" bitfld.long 0x00 1. " RESET ,Reset" "0,1" newline bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x444++0x3 line.long 0x00 "SEC0_CSTAT1,SEC0 SCI Status Register n" bitfld.long 0x00 16. " NMI ,Non-Maskable Interrupt" "0,1" bitfld.long 0x00 12. " WFI ,Wait For Idle" "0,1" bitfld.long 0x00 10. " SIDV ,SID Valid" "0,1" bitfld.long 0x00 9. " ACTV ,ACT Valid" "0,1" newline bitfld.long 0x00 8. " PNDV ,PND Valid" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x448++0x3 line.long 0x00 "SEC0_CPND1,SEC0 Core Pending Register n" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Highest Pending IRQ Priority" hexmask.long.byte 0x00 0.--7. 1. " SID ,Highest Pending IRQ Source ID" group.long 0x44C++0x3 line.long 0x00 "SEC0_CACT1,SEC0 SCI Active Register n" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Highest Active IRQ Priority" hexmask.long.byte 0x00 0.--7. 1. " SID ,Highest Active IRQ Source ID" group.long 0x450++0x3 line.long 0x00 "SEC0_CPMSK1,SEC0 SCI Priority Mask Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " PRIO ,IRQ Priority Mask" group.long 0x454++0x3 line.long 0x00 "SEC0_CGMSK1,SEC0 SCI Group Mask Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 8. " UGRP ,Ungrouped Mask" "0,1" bitfld.long 0x00 0.--3. " GRP ,Grouped Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x458++0x3 line.long 0x00 "SEC0_CPLVL1,SEC0 SCI Priority Level Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 0.--2. " PLVL ,Priority Levels" "0,1,2,3,4,5,6,7" group.long 0x45C++0x3 line.long 0x00 "SEC0_CSID1,SEC0 SCI Source ID Register n" hexmask.long.byte 0x00 0.--7. 1. " SID ,Source ID" group.long 0x480++0x3 line.long 0x00 "SEC0_CCTL2,SEC0 SCI Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 16. " NMIEN ,NMI Enable" "0,1" bitfld.long 0x00 12. " WFI ,Wait For Idle" "0,1" bitfld.long 0x00 1. " RESET ,Reset" "0,1" newline bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x484++0x3 line.long 0x00 "SEC0_CSTAT2,SEC0 SCI Status Register n" bitfld.long 0x00 16. " NMI ,Non-Maskable Interrupt" "0,1" bitfld.long 0x00 12. " WFI ,Wait For Idle" "0,1" bitfld.long 0x00 10. " SIDV ,SID Valid" "0,1" bitfld.long 0x00 9. " ACTV ,ACT Valid" "0,1" newline bitfld.long 0x00 8. " PNDV ,PND Valid" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x488++0x3 line.long 0x00 "SEC0_CPND2,SEC0 Core Pending Register n" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Highest Pending IRQ Priority" hexmask.long.byte 0x00 0.--7. 1. " SID ,Highest Pending IRQ Source ID" group.long 0x48C++0x3 line.long 0x00 "SEC0_CACT2,SEC0 SCI Active Register n" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Highest Active IRQ Priority" hexmask.long.byte 0x00 0.--7. 1. " SID ,Highest Active IRQ Source ID" group.long 0x490++0x3 line.long 0x00 "SEC0_CPMSK2,SEC0 SCI Priority Mask Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " PRIO ,IRQ Priority Mask" group.long 0x494++0x3 line.long 0x00 "SEC0_CGMSK2,SEC0 SCI Group Mask Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 8. " UGRP ,Ungrouped Mask" "0,1" bitfld.long 0x00 0.--3. " GRP ,Grouped Mask" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x498++0x3 line.long 0x00 "SEC0_CPLVL2,SEC0 SCI Priority Level Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 0.--2. " PLVL ,Priority Levels" "0,1,2,3,4,5,6,7" group.long 0x49C++0x3 line.long 0x00 "SEC0_CSID2,SEC0 SCI Source ID Register n" hexmask.long.byte 0x00 0.--7. 1. " SID ,Source ID" group.long 0x800++0x3 line.long 0x00 "SEC0_SCTL0,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x804++0x3 line.long 0x00 "SEC0_SSTAT0,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x808++0x3 line.long 0x00 "SEC0_SCTL1,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x80C++0x3 line.long 0x00 "SEC0_SSTAT1,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x810++0x3 line.long 0x00 "SEC0_SCTL2,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x814++0x3 line.long 0x00 "SEC0_SSTAT2,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x818++0x3 line.long 0x00 "SEC0_SCTL3,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x81C++0x3 line.long 0x00 "SEC0_SSTAT3,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x820++0x3 line.long 0x00 "SEC0_SCTL4,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SEC0_SSTAT4,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x828++0x3 line.long 0x00 "SEC0_SCTL5,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SEC0_SSTAT5,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x830++0x3 line.long 0x00 "SEC0_SCTL6,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SEC0_SSTAT6,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x838++0x3 line.long 0x00 "SEC0_SCTL7,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SEC0_SSTAT7,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x840++0x3 line.long 0x00 "SEC0_SCTL8,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x844++0x3 line.long 0x00 "SEC0_SSTAT8,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x848++0x3 line.long 0x00 "SEC0_SCTL9,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x84C++0x3 line.long 0x00 "SEC0_SSTAT9,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x850++0x3 line.long 0x00 "SEC0_SCTL10,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x854++0x3 line.long 0x00 "SEC0_SSTAT10,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x858++0x3 line.long 0x00 "SEC0_SCTL11,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x85C++0x3 line.long 0x00 "SEC0_SSTAT11,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x860++0x3 line.long 0x00 "SEC0_SCTL12,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x864++0x3 line.long 0x00 "SEC0_SSTAT12,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x868++0x3 line.long 0x00 "SEC0_SCTL13,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x86C++0x3 line.long 0x00 "SEC0_SSTAT13,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x870++0x3 line.long 0x00 "SEC0_SCTL14,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x874++0x3 line.long 0x00 "SEC0_SSTAT14,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x878++0x3 line.long 0x00 "SEC0_SCTL15,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x87C++0x3 line.long 0x00 "SEC0_SSTAT15,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x880++0x3 line.long 0x00 "SEC0_SCTL16,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x884++0x3 line.long 0x00 "SEC0_SSTAT16,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x888++0x3 line.long 0x00 "SEC0_SCTL17,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x88C++0x3 line.long 0x00 "SEC0_SSTAT17,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x890++0x3 line.long 0x00 "SEC0_SCTL18,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x894++0x3 line.long 0x00 "SEC0_SSTAT18,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x898++0x3 line.long 0x00 "SEC0_SCTL19,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x89C++0x3 line.long 0x00 "SEC0_SSTAT19,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8A0++0x3 line.long 0x00 "SEC0_SCTL20,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8A4++0x3 line.long 0x00 "SEC0_SSTAT20,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8A8++0x3 line.long 0x00 "SEC0_SCTL21,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8AC++0x3 line.long 0x00 "SEC0_SSTAT21,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8B0++0x3 line.long 0x00 "SEC0_SCTL22,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8B4++0x3 line.long 0x00 "SEC0_SSTAT22,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8B8++0x3 line.long 0x00 "SEC0_SCTL23,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8BC++0x3 line.long 0x00 "SEC0_SSTAT23,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8C0++0x3 line.long 0x00 "SEC0_SCTL24,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8C4++0x3 line.long 0x00 "SEC0_SSTAT24,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8C8++0x3 line.long 0x00 "SEC0_SCTL25,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8CC++0x3 line.long 0x00 "SEC0_SSTAT25,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8D0++0x3 line.long 0x00 "SEC0_SCTL26,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8D4++0x3 line.long 0x00 "SEC0_SSTAT26,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8D8++0x3 line.long 0x00 "SEC0_SCTL27,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8DC++0x3 line.long 0x00 "SEC0_SSTAT27,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8E0++0x3 line.long 0x00 "SEC0_SCTL28,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8E4++0x3 line.long 0x00 "SEC0_SSTAT28,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8E8++0x3 line.long 0x00 "SEC0_SCTL29,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8EC++0x3 line.long 0x00 "SEC0_SSTAT29,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8F0++0x3 line.long 0x00 "SEC0_SCTL30,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8F4++0x3 line.long 0x00 "SEC0_SSTAT30,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x8F8++0x3 line.long 0x00 "SEC0_SCTL31,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x8FC++0x3 line.long 0x00 "SEC0_SSTAT31,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x900++0x3 line.long 0x00 "SEC0_SCTL32,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x904++0x3 line.long 0x00 "SEC0_SSTAT32,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x908++0x3 line.long 0x00 "SEC0_SCTL33,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x90C++0x3 line.long 0x00 "SEC0_SSTAT33,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x910++0x3 line.long 0x00 "SEC0_SCTL34,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x914++0x3 line.long 0x00 "SEC0_SSTAT34,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x918++0x3 line.long 0x00 "SEC0_SCTL35,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x91C++0x3 line.long 0x00 "SEC0_SSTAT35,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x920++0x3 line.long 0x00 "SEC0_SCTL36,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x924++0x3 line.long 0x00 "SEC0_SSTAT36,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x928++0x3 line.long 0x00 "SEC0_SCTL37,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x92C++0x3 line.long 0x00 "SEC0_SSTAT37,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x930++0x3 line.long 0x00 "SEC0_SCTL38,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x934++0x3 line.long 0x00 "SEC0_SSTAT38,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x938++0x3 line.long 0x00 "SEC0_SCTL39,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x93C++0x3 line.long 0x00 "SEC0_SSTAT39,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x940++0x3 line.long 0x00 "SEC0_SCTL40,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x944++0x3 line.long 0x00 "SEC0_SSTAT40,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x948++0x3 line.long 0x00 "SEC0_SCTL41,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x94C++0x3 line.long 0x00 "SEC0_SSTAT41,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x950++0x3 line.long 0x00 "SEC0_SCTL42,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x954++0x3 line.long 0x00 "SEC0_SSTAT42,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x958++0x3 line.long 0x00 "SEC0_SCTL43,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x95C++0x3 line.long 0x00 "SEC0_SSTAT43,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x960++0x3 line.long 0x00 "SEC0_SCTL44,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x964++0x3 line.long 0x00 "SEC0_SSTAT44,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x968++0x3 line.long 0x00 "SEC0_SCTL45,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x96C++0x3 line.long 0x00 "SEC0_SSTAT45,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x970++0x3 line.long 0x00 "SEC0_SCTL46,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x974++0x3 line.long 0x00 "SEC0_SSTAT46,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x978++0x3 line.long 0x00 "SEC0_SCTL47,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x97C++0x3 line.long 0x00 "SEC0_SSTAT47,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x980++0x3 line.long 0x00 "SEC0_SCTL48,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x984++0x3 line.long 0x00 "SEC0_SSTAT48,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x988++0x3 line.long 0x00 "SEC0_SCTL49,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x98C++0x3 line.long 0x00 "SEC0_SSTAT49,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x990++0x3 line.long 0x00 "SEC0_SCTL50,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x994++0x3 line.long 0x00 "SEC0_SSTAT50,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x998++0x3 line.long 0x00 "SEC0_SCTL51,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x99C++0x3 line.long 0x00 "SEC0_SSTAT51,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9A0++0x3 line.long 0x00 "SEC0_SCTL52,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9A4++0x3 line.long 0x00 "SEC0_SSTAT52,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9A8++0x3 line.long 0x00 "SEC0_SCTL53,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9AC++0x3 line.long 0x00 "SEC0_SSTAT53,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9B0++0x3 line.long 0x00 "SEC0_SCTL54,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9B4++0x3 line.long 0x00 "SEC0_SSTAT54,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9B8++0x3 line.long 0x00 "SEC0_SCTL55,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9BC++0x3 line.long 0x00 "SEC0_SSTAT55,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9C0++0x3 line.long 0x00 "SEC0_SCTL56,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9C4++0x3 line.long 0x00 "SEC0_SSTAT56,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9C8++0x3 line.long 0x00 "SEC0_SCTL57,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9CC++0x3 line.long 0x00 "SEC0_SSTAT57,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9D0++0x3 line.long 0x00 "SEC0_SCTL58,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9D4++0x3 line.long 0x00 "SEC0_SSTAT58,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9D8++0x3 line.long 0x00 "SEC0_SCTL59,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9DC++0x3 line.long 0x00 "SEC0_SSTAT59,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9E0++0x3 line.long 0x00 "SEC0_SCTL60,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9E4++0x3 line.long 0x00 "SEC0_SSTAT60,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9E8++0x3 line.long 0x00 "SEC0_SCTL61,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9EC++0x3 line.long 0x00 "SEC0_SSTAT61,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9F0++0x3 line.long 0x00 "SEC0_SCTL62,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9F4++0x3 line.long 0x00 "SEC0_SSTAT62,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0x9F8++0x3 line.long 0x00 "SEC0_SCTL63,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0x9FC++0x3 line.long 0x00 "SEC0_SSTAT63,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA00++0x3 line.long 0x00 "SEC0_SCTL64,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA04++0x3 line.long 0x00 "SEC0_SSTAT64,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA08++0x3 line.long 0x00 "SEC0_SCTL65,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA0C++0x3 line.long 0x00 "SEC0_SSTAT65,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA10++0x3 line.long 0x00 "SEC0_SCTL66,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA14++0x3 line.long 0x00 "SEC0_SSTAT66,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA18++0x3 line.long 0x00 "SEC0_SCTL67,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA1C++0x3 line.long 0x00 "SEC0_SSTAT67,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA20++0x3 line.long 0x00 "SEC0_SCTL68,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA24++0x3 line.long 0x00 "SEC0_SSTAT68,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA28++0x3 line.long 0x00 "SEC0_SCTL69,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA2C++0x3 line.long 0x00 "SEC0_SSTAT69,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA30++0x3 line.long 0x00 "SEC0_SCTL70,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA34++0x3 line.long 0x00 "SEC0_SSTAT70,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA38++0x3 line.long 0x00 "SEC0_SCTL71,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA3C++0x3 line.long 0x00 "SEC0_SSTAT71,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA40++0x3 line.long 0x00 "SEC0_SCTL72,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA44++0x3 line.long 0x00 "SEC0_SSTAT72,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA48++0x3 line.long 0x00 "SEC0_SCTL73,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA4C++0x3 line.long 0x00 "SEC0_SSTAT73,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA50++0x3 line.long 0x00 "SEC0_SCTL74,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA54++0x3 line.long 0x00 "SEC0_SSTAT74,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA58++0x3 line.long 0x00 "SEC0_SCTL75,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA5C++0x3 line.long 0x00 "SEC0_SSTAT75,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA60++0x3 line.long 0x00 "SEC0_SCTL76,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA64++0x3 line.long 0x00 "SEC0_SSTAT76,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA68++0x3 line.long 0x00 "SEC0_SCTL77,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA6C++0x3 line.long 0x00 "SEC0_SSTAT77,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA70++0x3 line.long 0x00 "SEC0_SCTL78,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA74++0x3 line.long 0x00 "SEC0_SSTAT78,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA78++0x3 line.long 0x00 "SEC0_SCTL79,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA7C++0x3 line.long 0x00 "SEC0_SSTAT79,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA80++0x3 line.long 0x00 "SEC0_SCTL80,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA84++0x3 line.long 0x00 "SEC0_SSTAT80,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA88++0x3 line.long 0x00 "SEC0_SCTL81,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA8C++0x3 line.long 0x00 "SEC0_SSTAT81,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA90++0x3 line.long 0x00 "SEC0_SCTL82,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA94++0x3 line.long 0x00 "SEC0_SSTAT82,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xA98++0x3 line.long 0x00 "SEC0_SCTL83,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xA9C++0x3 line.long 0x00 "SEC0_SSTAT83,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAA0++0x3 line.long 0x00 "SEC0_SCTL84,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAA4++0x3 line.long 0x00 "SEC0_SSTAT84,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAA8++0x3 line.long 0x00 "SEC0_SCTL85,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAAC++0x3 line.long 0x00 "SEC0_SSTAT85,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAB0++0x3 line.long 0x00 "SEC0_SCTL86,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAB4++0x3 line.long 0x00 "SEC0_SSTAT86,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAB8++0x3 line.long 0x00 "SEC0_SCTL87,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xABC++0x3 line.long 0x00 "SEC0_SSTAT87,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAC0++0x3 line.long 0x00 "SEC0_SCTL88,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAC4++0x3 line.long 0x00 "SEC0_SSTAT88,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAC8++0x3 line.long 0x00 "SEC0_SCTL89,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xACC++0x3 line.long 0x00 "SEC0_SSTAT89,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAD0++0x3 line.long 0x00 "SEC0_SCTL90,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAD4++0x3 line.long 0x00 "SEC0_SSTAT90,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAD8++0x3 line.long 0x00 "SEC0_SCTL91,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xADC++0x3 line.long 0x00 "SEC0_SSTAT91,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAE0++0x3 line.long 0x00 "SEC0_SCTL92,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAE4++0x3 line.long 0x00 "SEC0_SSTAT92,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAE8++0x3 line.long 0x00 "SEC0_SCTL93,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAEC++0x3 line.long 0x00 "SEC0_SSTAT93,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAF0++0x3 line.long 0x00 "SEC0_SCTL94,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAF4++0x3 line.long 0x00 "SEC0_SSTAT94,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xAF8++0x3 line.long 0x00 "SEC0_SCTL95,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xAFC++0x3 line.long 0x00 "SEC0_SSTAT95,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB00++0x3 line.long 0x00 "SEC0_SCTL96,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB04++0x3 line.long 0x00 "SEC0_SSTAT96,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB08++0x3 line.long 0x00 "SEC0_SCTL97,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB0C++0x3 line.long 0x00 "SEC0_SSTAT97,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB10++0x3 line.long 0x00 "SEC0_SCTL98,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB14++0x3 line.long 0x00 "SEC0_SSTAT98,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB18++0x3 line.long 0x00 "SEC0_SCTL99,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB1C++0x3 line.long 0x00 "SEC0_SSTAT99,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB20++0x3 line.long 0x00 "SEC0_SCTL100,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB24++0x3 line.long 0x00 "SEC0_SSTAT100,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB28++0x3 line.long 0x00 "SEC0_SCTL101,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB2C++0x3 line.long 0x00 "SEC0_SSTAT101,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB30++0x3 line.long 0x00 "SEC0_SCTL102,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB34++0x3 line.long 0x00 "SEC0_SSTAT102,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB38++0x3 line.long 0x00 "SEC0_SCTL103,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB3C++0x3 line.long 0x00 "SEC0_SSTAT103,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB40++0x3 line.long 0x00 "SEC0_SCTL104,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB44++0x3 line.long 0x00 "SEC0_SSTAT104,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB48++0x3 line.long 0x00 "SEC0_SCTL105,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB4C++0x3 line.long 0x00 "SEC0_SSTAT105,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB50++0x3 line.long 0x00 "SEC0_SCTL106,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB54++0x3 line.long 0x00 "SEC0_SSTAT106,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB58++0x3 line.long 0x00 "SEC0_SCTL107,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB5C++0x3 line.long 0x00 "SEC0_SSTAT107,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB60++0x3 line.long 0x00 "SEC0_SCTL108,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB64++0x3 line.long 0x00 "SEC0_SSTAT108,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB68++0x3 line.long 0x00 "SEC0_SCTL109,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB6C++0x3 line.long 0x00 "SEC0_SSTAT109,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB70++0x3 line.long 0x00 "SEC0_SCTL110,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB74++0x3 line.long 0x00 "SEC0_SSTAT110,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB78++0x3 line.long 0x00 "SEC0_SCTL111,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB7C++0x3 line.long 0x00 "SEC0_SSTAT111,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB80++0x3 line.long 0x00 "SEC0_SCTL112,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB84++0x3 line.long 0x00 "SEC0_SSTAT112,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB88++0x3 line.long 0x00 "SEC0_SCTL113,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB8C++0x3 line.long 0x00 "SEC0_SSTAT113,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB90++0x3 line.long 0x00 "SEC0_SCTL114,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB94++0x3 line.long 0x00 "SEC0_SSTAT114,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xB98++0x3 line.long 0x00 "SEC0_SCTL115,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xB9C++0x3 line.long 0x00 "SEC0_SSTAT115,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBA0++0x3 line.long 0x00 "SEC0_SCTL116,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBA4++0x3 line.long 0x00 "SEC0_SSTAT116,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBA8++0x3 line.long 0x00 "SEC0_SCTL117,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBAC++0x3 line.long 0x00 "SEC0_SSTAT117,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBB0++0x3 line.long 0x00 "SEC0_SCTL118,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBB4++0x3 line.long 0x00 "SEC0_SSTAT118,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBB8++0x3 line.long 0x00 "SEC0_SCTL119,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBBC++0x3 line.long 0x00 "SEC0_SSTAT119,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBC0++0x3 line.long 0x00 "SEC0_SCTL120,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBC4++0x3 line.long 0x00 "SEC0_SSTAT120,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBC8++0x3 line.long 0x00 "SEC0_SCTL121,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBCC++0x3 line.long 0x00 "SEC0_SSTAT121,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBD0++0x3 line.long 0x00 "SEC0_SCTL122,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBD4++0x3 line.long 0x00 "SEC0_SSTAT122,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBD8++0x3 line.long 0x00 "SEC0_SCTL123,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBDC++0x3 line.long 0x00 "SEC0_SSTAT123,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBE0++0x3 line.long 0x00 "SEC0_SCTL124,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBE4++0x3 line.long 0x00 "SEC0_SSTAT124,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBE8++0x3 line.long 0x00 "SEC0_SCTL125,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBEC++0x3 line.long 0x00 "SEC0_SSTAT125,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBF0++0x3 line.long 0x00 "SEC0_SCTL126,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBF4++0x3 line.long 0x00 "SEC0_SSTAT126,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xBF8++0x3 line.long 0x00 "SEC0_SCTL127,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xBFC++0x3 line.long 0x00 "SEC0_SSTAT127,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC00++0x3 line.long 0x00 "SEC0_SCTL128,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC04++0x3 line.long 0x00 "SEC0_SSTAT128,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC08++0x3 line.long 0x00 "SEC0_SCTL129,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC0C++0x3 line.long 0x00 "SEC0_SSTAT129,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC10++0x3 line.long 0x00 "SEC0_SCTL130,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC14++0x3 line.long 0x00 "SEC0_SSTAT130,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC18++0x3 line.long 0x00 "SEC0_SCTL131,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC1C++0x3 line.long 0x00 "SEC0_SSTAT131,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC20++0x3 line.long 0x00 "SEC0_SCTL132,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC24++0x3 line.long 0x00 "SEC0_SSTAT132,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC28++0x3 line.long 0x00 "SEC0_SCTL133,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC2C++0x3 line.long 0x00 "SEC0_SSTAT133,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC30++0x3 line.long 0x00 "SEC0_SCTL134,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC34++0x3 line.long 0x00 "SEC0_SSTAT134,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC38++0x3 line.long 0x00 "SEC0_SCTL135,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC3C++0x3 line.long 0x00 "SEC0_SSTAT135,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC40++0x3 line.long 0x00 "SEC0_SCTL136,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC44++0x3 line.long 0x00 "SEC0_SSTAT136,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC48++0x3 line.long 0x00 "SEC0_SCTL137,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC4C++0x3 line.long 0x00 "SEC0_SSTAT137,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC50++0x3 line.long 0x00 "SEC0_SCTL138,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC54++0x3 line.long 0x00 "SEC0_SSTAT138,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC58++0x3 line.long 0x00 "SEC0_SCTL139,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC5C++0x3 line.long 0x00 "SEC0_SSTAT139,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC60++0x3 line.long 0x00 "SEC0_SCTL140,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC64++0x3 line.long 0x00 "SEC0_SSTAT140,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC68++0x3 line.long 0x00 "SEC0_SCTL141,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC6C++0x3 line.long 0x00 "SEC0_SSTAT141,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC70++0x3 line.long 0x00 "SEC0_SCTL142,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC74++0x3 line.long 0x00 "SEC0_SSTAT142,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC78++0x3 line.long 0x00 "SEC0_SCTL143,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC7C++0x3 line.long 0x00 "SEC0_SSTAT143,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC80++0x3 line.long 0x00 "SEC0_SCTL144,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC84++0x3 line.long 0x00 "SEC0_SSTAT144,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC88++0x3 line.long 0x00 "SEC0_SCTL145,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC8C++0x3 line.long 0x00 "SEC0_SSTAT145,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC90++0x3 line.long 0x00 "SEC0_SCTL146,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC94++0x3 line.long 0x00 "SEC0_SSTAT146,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xC98++0x3 line.long 0x00 "SEC0_SCTL147,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xC9C++0x3 line.long 0x00 "SEC0_SSTAT147,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCA0++0x3 line.long 0x00 "SEC0_SCTL148,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCA4++0x3 line.long 0x00 "SEC0_SSTAT148,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCA8++0x3 line.long 0x00 "SEC0_SCTL149,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCAC++0x3 line.long 0x00 "SEC0_SSTAT149,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCB0++0x3 line.long 0x00 "SEC0_SCTL150,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCB4++0x3 line.long 0x00 "SEC0_SSTAT150,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCB8++0x3 line.long 0x00 "SEC0_SCTL151,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCBC++0x3 line.long 0x00 "SEC0_SSTAT151,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCC0++0x3 line.long 0x00 "SEC0_SCTL152,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCC4++0x3 line.long 0x00 "SEC0_SSTAT152,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCC8++0x3 line.long 0x00 "SEC0_SCTL153,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCCC++0x3 line.long 0x00 "SEC0_SSTAT153,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCD0++0x3 line.long 0x00 "SEC0_SCTL154,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCD4++0x3 line.long 0x00 "SEC0_SSTAT154,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCD8++0x3 line.long 0x00 "SEC0_SCTL155,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCDC++0x3 line.long 0x00 "SEC0_SSTAT155,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCE0++0x3 line.long 0x00 "SEC0_SCTL156,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCE4++0x3 line.long 0x00 "SEC0_SSTAT156,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCE8++0x3 line.long 0x00 "SEC0_SCTL157,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCEC++0x3 line.long 0x00 "SEC0_SSTAT157,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCF0++0x3 line.long 0x00 "SEC0_SCTL158,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCF4++0x3 line.long 0x00 "SEC0_SSTAT158,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xCF8++0x3 line.long 0x00 "SEC0_SCTL159,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xCFC++0x3 line.long 0x00 "SEC0_SSTAT159,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD00++0x3 line.long 0x00 "SEC0_SCTL160,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD04++0x3 line.long 0x00 "SEC0_SSTAT160,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD08++0x3 line.long 0x00 "SEC0_SCTL161,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD0C++0x3 line.long 0x00 "SEC0_SSTAT161,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD10++0x3 line.long 0x00 "SEC0_SCTL162,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD14++0x3 line.long 0x00 "SEC0_SSTAT162,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD18++0x3 line.long 0x00 "SEC0_SCTL163,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD1C++0x3 line.long 0x00 "SEC0_SSTAT163,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD20++0x3 line.long 0x00 "SEC0_SCTL164,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD24++0x3 line.long 0x00 "SEC0_SSTAT164,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD28++0x3 line.long 0x00 "SEC0_SCTL165,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD2C++0x3 line.long 0x00 "SEC0_SSTAT165,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD30++0x3 line.long 0x00 "SEC0_SCTL166,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD34++0x3 line.long 0x00 "SEC0_SSTAT166,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD38++0x3 line.long 0x00 "SEC0_SCTL167,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD3C++0x3 line.long 0x00 "SEC0_SSTAT167,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD40++0x3 line.long 0x00 "SEC0_SCTL168,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD44++0x3 line.long 0x00 "SEC0_SSTAT168,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD48++0x3 line.long 0x00 "SEC0_SCTL169,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD4C++0x3 line.long 0x00 "SEC0_SSTAT169,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD50++0x3 line.long 0x00 "SEC0_SCTL170,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD54++0x3 line.long 0x00 "SEC0_SSTAT170,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD58++0x3 line.long 0x00 "SEC0_SCTL171,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD5C++0x3 line.long 0x00 "SEC0_SSTAT171,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD60++0x3 line.long 0x00 "SEC0_SCTL172,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD64++0x3 line.long 0x00 "SEC0_SSTAT172,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD68++0x3 line.long 0x00 "SEC0_SCTL173,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD6C++0x3 line.long 0x00 "SEC0_SSTAT173,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD70++0x3 line.long 0x00 "SEC0_SCTL174,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD74++0x3 line.long 0x00 "SEC0_SSTAT174,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD78++0x3 line.long 0x00 "SEC0_SCTL175,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD7C++0x3 line.long 0x00 "SEC0_SSTAT175,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD80++0x3 line.long 0x00 "SEC0_SCTL176,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD84++0x3 line.long 0x00 "SEC0_SSTAT176,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD88++0x3 line.long 0x00 "SEC0_SCTL177,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD8C++0x3 line.long 0x00 "SEC0_SSTAT177,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD90++0x3 line.long 0x00 "SEC0_SCTL178,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD94++0x3 line.long 0x00 "SEC0_SSTAT178,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xD98++0x3 line.long 0x00 "SEC0_SCTL179,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xD9C++0x3 line.long 0x00 "SEC0_SSTAT179,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDA0++0x3 line.long 0x00 "SEC0_SCTL180,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDA4++0x3 line.long 0x00 "SEC0_SSTAT180,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDA8++0x3 line.long 0x00 "SEC0_SCTL181,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDAC++0x3 line.long 0x00 "SEC0_SSTAT181,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDB0++0x3 line.long 0x00 "SEC0_SCTL182,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDB4++0x3 line.long 0x00 "SEC0_SSTAT182,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDB8++0x3 line.long 0x00 "SEC0_SCTL183,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDBC++0x3 line.long 0x00 "SEC0_SSTAT183,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDC0++0x3 line.long 0x00 "SEC0_SCTL184,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDC4++0x3 line.long 0x00 "SEC0_SSTAT184,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDC8++0x3 line.long 0x00 "SEC0_SCTL185,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDCC++0x3 line.long 0x00 "SEC0_SSTAT185,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDD0++0x3 line.long 0x00 "SEC0_SCTL186,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDD4++0x3 line.long 0x00 "SEC0_SSTAT186,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDD8++0x3 line.long 0x00 "SEC0_SCTL187,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDDC++0x3 line.long 0x00 "SEC0_SSTAT187,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDE0++0x3 line.long 0x00 "SEC0_SCTL188,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDE4++0x3 line.long 0x00 "SEC0_SSTAT188,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDE8++0x3 line.long 0x00 "SEC0_SCTL189,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDEC++0x3 line.long 0x00 "SEC0_SSTAT189,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDF0++0x3 line.long 0x00 "SEC0_SCTL190,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDF4++0x3 line.long 0x00 "SEC0_SSTAT190,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xDF8++0x3 line.long 0x00 "SEC0_SCTL191,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xDFC++0x3 line.long 0x00 "SEC0_SSTAT191,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE00++0x3 line.long 0x00 "SEC0_SCTL192,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE04++0x3 line.long 0x00 "SEC0_SSTAT192,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE08++0x3 line.long 0x00 "SEC0_SCTL193,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE0C++0x3 line.long 0x00 "SEC0_SSTAT193,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE10++0x3 line.long 0x00 "SEC0_SCTL194,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE14++0x3 line.long 0x00 "SEC0_SSTAT194,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE18++0x3 line.long 0x00 "SEC0_SCTL195,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE1C++0x3 line.long 0x00 "SEC0_SSTAT195,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE20++0x3 line.long 0x00 "SEC0_SCTL196,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE24++0x3 line.long 0x00 "SEC0_SSTAT196,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE28++0x3 line.long 0x00 "SEC0_SCTL197,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE2C++0x3 line.long 0x00 "SEC0_SSTAT197,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE30++0x3 line.long 0x00 "SEC0_SCTL198,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE34++0x3 line.long 0x00 "SEC0_SSTAT198,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE38++0x3 line.long 0x00 "SEC0_SCTL199,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE3C++0x3 line.long 0x00 "SEC0_SSTAT199,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE40++0x3 line.long 0x00 "SEC0_SCTL200,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE44++0x3 line.long 0x00 "SEC0_SSTAT200,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE48++0x3 line.long 0x00 "SEC0_SCTL201,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE4C++0x3 line.long 0x00 "SEC0_SSTAT201,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE50++0x3 line.long 0x00 "SEC0_SCTL202,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE54++0x3 line.long 0x00 "SEC0_SSTAT202,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE58++0x3 line.long 0x00 "SEC0_SCTL203,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE5C++0x3 line.long 0x00 "SEC0_SSTAT203,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE60++0x3 line.long 0x00 "SEC0_SCTL204,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE64++0x3 line.long 0x00 "SEC0_SSTAT204,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE68++0x3 line.long 0x00 "SEC0_SCTL205,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE6C++0x3 line.long 0x00 "SEC0_SSTAT205,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE70++0x3 line.long 0x00 "SEC0_SCTL206,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE74++0x3 line.long 0x00 "SEC0_SSTAT206,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE78++0x3 line.long 0x00 "SEC0_SCTL207,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE7C++0x3 line.long 0x00 "SEC0_SSTAT207,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE80++0x3 line.long 0x00 "SEC0_SCTL208,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE84++0x3 line.long 0x00 "SEC0_SSTAT208,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE88++0x3 line.long 0x00 "SEC0_SCTL209,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE8C++0x3 line.long 0x00 "SEC0_SSTAT209,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE90++0x3 line.long 0x00 "SEC0_SCTL210,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE94++0x3 line.long 0x00 "SEC0_SSTAT210,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xE98++0x3 line.long 0x00 "SEC0_SCTL211,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xE9C++0x3 line.long 0x00 "SEC0_SSTAT211,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEA0++0x3 line.long 0x00 "SEC0_SCTL212,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEA4++0x3 line.long 0x00 "SEC0_SSTAT212,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEA8++0x3 line.long 0x00 "SEC0_SCTL213,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEAC++0x3 line.long 0x00 "SEC0_SSTAT213,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEB0++0x3 line.long 0x00 "SEC0_SCTL214,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEB4++0x3 line.long 0x00 "SEC0_SSTAT214,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEB8++0x3 line.long 0x00 "SEC0_SCTL215,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEBC++0x3 line.long 0x00 "SEC0_SSTAT215,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEC0++0x3 line.long 0x00 "SEC0_SCTL216,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEC4++0x3 line.long 0x00 "SEC0_SSTAT216,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEC8++0x3 line.long 0x00 "SEC0_SCTL217,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xECC++0x3 line.long 0x00 "SEC0_SSTAT217,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xED0++0x3 line.long 0x00 "SEC0_SCTL218,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xED4++0x3 line.long 0x00 "SEC0_SSTAT218,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xED8++0x3 line.long 0x00 "SEC0_SCTL219,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEDC++0x3 line.long 0x00 "SEC0_SSTAT219,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEE0++0x3 line.long 0x00 "SEC0_SCTL220,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEE4++0x3 line.long 0x00 "SEC0_SSTAT220,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEE8++0x3 line.long 0x00 "SEC0_SCTL221,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEEC++0x3 line.long 0x00 "SEC0_SSTAT221,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEF0++0x3 line.long 0x00 "SEC0_SCTL222,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEF4++0x3 line.long 0x00 "SEC0_SSTAT222,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xEF8++0x3 line.long 0x00 "SEC0_SCTL223,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xEFC++0x3 line.long 0x00 "SEC0_SSTAT223,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF00++0x3 line.long 0x00 "SEC0_SCTL224,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF04++0x3 line.long 0x00 "SEC0_SSTAT224,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF08++0x3 line.long 0x00 "SEC0_SCTL225,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF0C++0x3 line.long 0x00 "SEC0_SSTAT225,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF10++0x3 line.long 0x00 "SEC0_SCTL226,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF14++0x3 line.long 0x00 "SEC0_SSTAT226,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF18++0x3 line.long 0x00 "SEC0_SCTL227,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF1C++0x3 line.long 0x00 "SEC0_SSTAT227,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF20++0x3 line.long 0x00 "SEC0_SCTL228,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF24++0x3 line.long 0x00 "SEC0_SSTAT228,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF28++0x3 line.long 0x00 "SEC0_SCTL229,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF2C++0x3 line.long 0x00 "SEC0_SSTAT229,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF30++0x3 line.long 0x00 "SEC0_SCTL230,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF34++0x3 line.long 0x00 "SEC0_SSTAT230,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF38++0x3 line.long 0x00 "SEC0_SCTL231,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF3C++0x3 line.long 0x00 "SEC0_SSTAT231,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF40++0x3 line.long 0x00 "SEC0_SCTL232,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF44++0x3 line.long 0x00 "SEC0_SSTAT232,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF48++0x3 line.long 0x00 "SEC0_SCTL233,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF4C++0x3 line.long 0x00 "SEC0_SSTAT233,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF50++0x3 line.long 0x00 "SEC0_SCTL234,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF54++0x3 line.long 0x00 "SEC0_SSTAT234,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF58++0x3 line.long 0x00 "SEC0_SCTL235,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF5C++0x3 line.long 0x00 "SEC0_SSTAT235,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF60++0x3 line.long 0x00 "SEC0_SCTL236,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF64++0x3 line.long 0x00 "SEC0_SSTAT236,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF68++0x3 line.long 0x00 "SEC0_SCTL237,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF6C++0x3 line.long 0x00 "SEC0_SSTAT237,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF70++0x3 line.long 0x00 "SEC0_SCTL238,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF74++0x3 line.long 0x00 "SEC0_SSTAT238,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF78++0x3 line.long 0x00 "SEC0_SCTL239,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF7C++0x3 line.long 0x00 "SEC0_SSTAT239,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF80++0x3 line.long 0x00 "SEC0_SCTL240,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF84++0x3 line.long 0x00 "SEC0_SSTAT240,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF88++0x3 line.long 0x00 "SEC0_SCTL241,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF8C++0x3 line.long 0x00 "SEC0_SSTAT241,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF90++0x3 line.long 0x00 "SEC0_SCTL242,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF94++0x3 line.long 0x00 "SEC0_SSTAT242,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xF98++0x3 line.long 0x00 "SEC0_SCTL243,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xF9C++0x3 line.long 0x00 "SEC0_SSTAT243,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFA0++0x3 line.long 0x00 "SEC0_SCTL244,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFA4++0x3 line.long 0x00 "SEC0_SSTAT244,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFA8++0x3 line.long 0x00 "SEC0_SCTL245,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFAC++0x3 line.long 0x00 "SEC0_SSTAT245,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFB0++0x3 line.long 0x00 "SEC0_SCTL246,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFB4++0x3 line.long 0x00 "SEC0_SSTAT246,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFB8++0x3 line.long 0x00 "SEC0_SCTL247,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFBC++0x3 line.long 0x00 "SEC0_SSTAT247,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFC0++0x3 line.long 0x00 "SEC0_SCTL248,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFC4++0x3 line.long 0x00 "SEC0_SSTAT248,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFC8++0x3 line.long 0x00 "SEC0_SCTL249,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFCC++0x3 line.long 0x00 "SEC0_SSTAT249,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFD0++0x3 line.long 0x00 "SEC0_SCTL250,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFD4++0x3 line.long 0x00 "SEC0_SSTAT250,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFD8++0x3 line.long 0x00 "SEC0_SCTL251,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFDC++0x3 line.long 0x00 "SEC0_SSTAT251,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFE0++0x3 line.long 0x00 "SEC0_SCTL252,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFE4++0x3 line.long 0x00 "SEC0_SSTAT252,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFE8++0x3 line.long 0x00 "SEC0_SCTL253,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFEC++0x3 line.long 0x00 "SEC0_SSTAT253,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFF0++0x3 line.long 0x00 "SEC0_SCTL254,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFF4++0x3 line.long 0x00 "SEC0_SSTAT254,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" group.long 0xFF8++0x3 line.long 0x00 "SEC0_SCTL255,SEC0 Source Control Register n" bitfld.long 0x00 31. " LOCK ,Lock" "0,1" bitfld.long 0x00 24.--27. " CTG ,Core Target Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 16.--19. " GRP ,Group Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 8.--15. 1. " PRIO ,Priority Level Select" newline bitfld.long 0x00 4. " ERREN ,Error Enable" "0,1" bitfld.long 0x00 3. " ES ,Edge Select" "0,1" bitfld.long 0x00 2. " SEN ,Source (signal) Enable" "0,1" bitfld.long 0x00 1. " FEN ,Fault Enable" "0,1" newline bitfld.long 0x00 0. " IEN ,Interrupt Enable" "0,1" group.long 0xFFC++0x3 line.long 0x00 "SEC0_SSTAT255,SEC0 Source Status Register n" hexmask.long.byte 0x00 16.--23. 1. " CHID ,Channel ID" bitfld.long 0x00 9. " ACT ,Active Source" "0,1" bitfld.long 0x00 8. " PND ,Pending Source" "0,1" bitfld.long 0x00 4.--5. " ERRC ,Error Cause" "0,1,2,3" newline bitfld.long 0x00 1. " ERR ,Error" "0,1" tree.end tree "SINC (Sinus Cardinalis Filter)" base ad:0x31014000 width 19. group.long 0x0++0x3 line.long 0x00 "SINC0_CTL,SINC0 Control Register" bitfld.long 0x00 31. " ELIM1 ,Enable Limit for Group 1" "0,1" bitfld.long 0x00 30. " ESAT1 ,Enable Saturation for Group 1" "0,1" bitfld.long 0x00 29. " EPCNT1 ,Enable Primary Count for Group 1" "0,1" bitfld.long 0x00 28. " EFOVF1 ,Enable FIFO Overflow for Group 1" "0,1" newline bitfld.long 0x00 15. " ELIM0 ,Enable Limit for Group 0" "0,1" bitfld.long 0x00 14. " ESAT0 ,Enable Saturation for Group 0" "0,1" bitfld.long 0x00 13. " EPCNT0 ,Enable Primary Count for Group 0" "0,1" bitfld.long 0x00 12. " EFOVF0 ,Enable FIFO Overflow for Group 0" "0,1" newline bitfld.long 0x00 6.--7. " EN3 ,Enable Filter Pair 3" "0,1,2,3" bitfld.long 0x00 4.--5. " EN2 ,Enable Filter Pair 2" "0,1,2,3" bitfld.long 0x00 2.--3. " EN1 ,Enable Filter Pair 1" "0,1,2,3" bitfld.long 0x00 0.--1. " EN0 ,Enable Filter Pair 0" "0,1,2,3" group.long 0x4++0x3 line.long 0x00 "SINC0_STAT,SINC0 Status Register" bitfld.long 0x00 31. " GLIM1 ,Group 1 Limit Status" "0,1" bitfld.long 0x00 30. " GSAT1 ,Group 1 Saturation Status" "0,1" bitfld.long 0x00 29. " PCNT1 ,Primary (Filter) Count for Group 1 Status" "0,1" bitfld.long 0x00 28. " FOVF1 ,FIFO Overflow for Group 1 Status" "0,1" newline bitfld.long 0x00 27. " PFAB1 ,Primary (Filter) Fabric Error for Group 1 Status" "0,1" bitfld.long 0x00 23. " PSAT3 ,Primary (Filter) 3 Saturation Status" "0,1" bitfld.long 0x00 22. " PSAT2 ,Primary (Filter) 2 Saturation Status" "0,1" bitfld.long 0x00 21. " PSAT1 ,Primary (Filter) 1 Saturation Status" "0,1" newline bitfld.long 0x00 20. " PSAT0 ,Primary (Filter) 0 Saturation Status" "0,1" bitfld.long 0x00 19. " MAX3 ,Maximum for Secondary Filter 3 Status" "0,1" bitfld.long 0x00 18. " MAX2 ,Maximum for Secondary Filter 2 Status" "0,1" bitfld.long 0x00 17. " MAX1 ,Maximum for Secondary Filter 1 Status" "0,1" newline bitfld.long 0x00 16. " MAX0 ,Maximum for Secondary Filter 0 Status" "0,1" bitfld.long 0x00 15. " GLIM0 ,Group 0 Limit Status" "0,1" bitfld.long 0x00 14. " GSAT0 ,Group 0 Saturation Status" "0,1" bitfld.long 0x00 13. " PCNT0 ,Primary (Filter) Count for Group 0 Status" "0,1" newline bitfld.long 0x00 12. " FOVF0 ,FIFO Overflow for Group 0 Status" "0,1" bitfld.long 0x00 11. " PFAB0 ,Primary (Filter) Fabric Error for Group 0 Status" "0,1" bitfld.long 0x00 3. " MIN3 ,Minimum for Secondary Filter 3 Status" "0,1" bitfld.long 0x00 2. " MIN2 ,Minimum for Secondary Filter 2 Status" "0,1" newline bitfld.long 0x00 1. " MIN1 ,Minimum for Secondary Filter 1 Status" "0,1" bitfld.long 0x00 0. " MIN0 ,Minimum for Secondary Filter 0 Status" "0,1" group.long 0x8++0x3 line.long 0x00 "SINC0_CLK,SINC0 Clock Control Register" bitfld.long 0x00 26.--31. " MDIV1 ,Modulator (Clock) Divider for Group 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 24. " MREQ1 ,Modulator (Clock) Request for Group 1 Status" "0,1" bitfld.long 0x00 18.--23. " MADJ1 ,Modulator (Clock) Adjustment for Group 1" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--17. " MCEN1 ,Modulator (Clock) Enable for Group 1" "0,1,2,3" newline bitfld.long 0x00 10.--15. " MDIV0 ,Modulator (Clock) Divider for Group 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 8. " MREQ0 ,Modulator (Clock) Request for Group 0 Status" "0,1" bitfld.long 0x00 2.--7. " MADJ0 ,Modulator (Clock) Adjustment for Group 0" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 0.--1. " MCEN0 ,Modulator (Clock) Enable for Group 0" "0,1,2,3" group.long 0x10++0x3 line.long 0x00 "SINC0_RATE0,SINC0 Rate Control for Group 0 Register" bitfld.long 0x00 25.--30. " SADJ ,Secondary (Filter) Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 16.--24. 1. " PADJ ,Primary (Filter) Adjustment" bitfld.long 0x00 9.--14. " SDEC ,Secondary (Filter) Decimation Rate" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 0.--8. 1. " PDEC ,Primary (Filter) Decimation Rate" group.long 0x14++0x3 line.long 0x00 "SINC0_RATE1,SINC0 Rate Control for Group 1 Register" bitfld.long 0x00 25.--30. " SADJ ,Secondary (Filter) Adjustment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 16.--24. 1. " PADJ ,Primary (Filter) Adjustment" bitfld.long 0x00 9.--14. " SDEC ,Secondary (Filter) Decimation Rate" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.word 0x00 0.--8. 1. " PDEC ,Primary (Filter) Decimation Rate" group.long 0x18++0x3 line.long 0x00 "SINC0_LEVEL0,SINC0 Level Control for Group 0 Register" bitfld.long 0x00 30. " PORD ,Primary (Filter) Order" "0,1" bitfld.long 0x00 24.--29. " PSCALE ,Primary (Filter) Scaling" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.byte 0x00 16.--23. 1. " PCNT ,Primary (Filter) Count" bitfld.long 0x00 14. " SORD ,Secondary (Filter) Order Select" "0,1" newline bitfld.long 0x00 11.--13. " LCNT ,(Excursion) Limit Count" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " LWIN ,(Excursion) Limit Window" "0,1,2,3,4,5,6,7" group.long 0x1C++0x3 line.long 0x00 "SINC0_LEVEL1,SINC0 Level Control for Group 1 Register" bitfld.long 0x00 30. " PORD ,Primary (Filter) Order" "0,1" bitfld.long 0x00 24.--29. " PSCALE ,Primary (Filter) Scaling" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" hexmask.long.byte 0x00 16.--23. 1. " PCNT ,Primary (Filter) Count" bitfld.long 0x00 14. " SORD ,Secondary (Filter) Order" "0,1" newline bitfld.long 0x00 11.--13. " LCNT ,(Excursion) Limit Count" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " LWIN ,(Excursion) Limit Window" "0,1,2,3,4,5,6,7" group.long 0x20++0x3 line.long 0x00 "SINC0_LIMIT0,SINC0 (Amplitude) Limits for Secondary Filter 0 Register" hexmask.long.word 0x00 16.--31. 1. " LMAX ,Limit Maximum for Secondary Filter 0" hexmask.long.word 0x00 0.--15. 1. " LMIN ,Limit Minimum for Secondary Filter 0" group.long 0x24++0x3 line.long 0x00 "SINC0_LIMIT1,SINC0 (Amplitude) Limits for Secondary Filter 1 Register" hexmask.long.word 0x00 16.--31. 1. " LMAX ,Limit Maximum for Secondary Filter 1" hexmask.long.word 0x00 0.--15. 1. " LMIN ,Limit Minimum for Secondary Filter 1" group.long 0x28++0x3 line.long 0x00 "SINC0_LIMIT2,SINC0 (Amplitude) Limits for Secondary Filter 2 Register" hexmask.long.word 0x00 16.--31. 1. " LMAX ,Limit Maximum for Secondary Filter 2" hexmask.long.word 0x00 0.--15. 1. " LMIN ,Limit Minimum for Secondary Filter 2" group.long 0x2C++0x3 line.long 0x00 "SINC0_LIMIT3,SINC0 (Amplitude) Limits for Secondary Filter 3 Register" hexmask.long.word 0x00 16.--31. 1. " LMAX ,Limit Maximum for Secondary Filter 3" hexmask.long.word 0x00 0.--15. 1. " LMIN ,Limit Minimum for Secondary Filter 3" group.long 0x30++0x3 line.long 0x00 "SINC0_BIAS0,SINC0 Bias for Group 0 Register" group.long 0x34++0x3 line.long 0x00 "SINC0_BIAS1,SINC0 Bias for Group 1 Register" group.long 0x38++0x3 line.long 0x00 "SINC0_PPTR0,SINC0 Primary (Filters) Pointer for Group 0 Register" group.long 0x3C++0x3 line.long 0x00 "SINC0_PPTR1,SINC0 Primary (Filters) Pointer for Group 1 Register" group.long 0x40++0x3 line.long 0x00 "SINC0_PHEAD0,SINC0 Primary (Filters) Head for Group 0 Register" hexmask.long 0x00 1.--31. 1. " PHEAD ,Primary (Filter) Head Pointer" group.long 0x44++0x3 line.long 0x00 "SINC0_PHEAD1,SINC0 Primary (Filters) Head for Group 1 Register" hexmask.long 0x00 1.--31. 1. " PHEAD ,Primary (Filter) Head Pointer" group.long 0x48++0x3 line.long 0x00 "SINC0_PTAIL0,SINC0 Primary (Filters) Tail for Group 0 Register" hexmask.long 0x00 1.--31. 1. " PTAIL ,Primary (Filter) Tail Pointer" group.long 0x4C++0x3 line.long 0x00 "SINC0_PTAIL1,SINC0 Primary (Filters) Tail for Group 1 Register" hexmask.long 0x00 1.--31. 1. " PTAIL ,Primary (Filter) Tail Pointer" group.long 0x50++0x3 line.long 0x00 "SINC0_HIS_STAT,SINC0 History Status Register" bitfld.long 0x00 12.--14. " P3HISPTR ,Pair 3 History Pointer" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " P2HISPTR ,Pair 2 History Pointer" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--6. " P1HISPTR ,Pair 1 History Pointer" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. " P0HISPTR ,Pair 0 History Pointer" "0,1,2,3,4,5,6,7" group.long 0x80++0x3 line.long 0x00 "SINC0_P0SEC_HIST0,SINC0 Pair 0 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0x84++0x3 line.long 0x00 "SINC0_P0SEC_HIST1,SINC0 Pair 0 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0x88++0x3 line.long 0x00 "SINC0_P0SEC_HIST2,SINC0 Pair 0 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0x8C++0x3 line.long 0x00 "SINC0_P0SEC_HIST3,SINC0 Pair 0 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0x90++0x3 line.long 0x00 "SINC0_P1SEC_HIST0,SINC0 Pair 1 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0x94++0x3 line.long 0x00 "SINC0_P1SEC_HIST1,SINC0 Pair 1 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0x98++0x3 line.long 0x00 "SINC0_P1SEC_HIST2,SINC0 Pair 1 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0x9C++0x3 line.long 0x00 "SINC0_P1SEC_HIST3,SINC0 Pair 1 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0xA0++0x3 line.long 0x00 "SINC0_P2SEC_HIST0,SINC0 Pair 2 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0xA4++0x3 line.long 0x00 "SINC0_P2SEC_HIST1,SINC0 Pair 2 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0xA8++0x3 line.long 0x00 "SINC0_P2SEC_HIST2,SINC0 Pair 2 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0xAC++0x3 line.long 0x00 "SINC0_P2SEC_HIST3,SINC0 Pair 2 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0xB0++0x3 line.long 0x00 "SINC0_P3SEC_HIST0,SINC0 Pair 3 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0xB4++0x3 line.long 0x00 "SINC0_P3SEC_HIST1,SINC0 Pair 3 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0xB8++0x3 line.long 0x00 "SINC0_P3SEC_HIST2,SINC0 Pair 3 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" group.long 0xBC++0x3 line.long 0x00 "SINC0_P3SEC_HIST3,SINC0 Pair 3 Secondary (Filter) History n Register" hexmask.long.word 0x00 16.--31. 1. " HI ,High Data Word" hexmask.long.word 0x00 0.--15. 1. " LO ,Low Data Word" tree.end tree "SMC (Static Memory Controller)" base ad:0x3100600C width 13. group.long 0x0++0x3 line.long 0x00 "SMC0_B0CTL,SMC0 Bank 0 Control Register" bitfld.long 0x00 20.--21. " PGSZ ,Flash Page Size" "0,1,2,3" bitfld.long 0x00 14. " RDYABTEN ,ARDY Abort Enable" "0,1" bitfld.long 0x00 13. " RDYPOL ,ARDY Polarity" "0,1" bitfld.long 0x00 12. " RDYEN ,ARDY Enable" "0,1" newline bitfld.long 0x00 8.--9. " SELCTRL ,Select Control" "0,1,2,3" bitfld.long 0x00 4.--5. " MODE ,Memory Access Mode" "0,1,2,3" bitfld.long 0x00 0. " EN ,Bank 0 Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMC0_B0TIM,SMC0 Bank 0 Timing Register" bitfld.long 0x00 24.--29. " RAT ,Read Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 20.--22. " RHT ,Read Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. " RST ,Read Setup Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--13. " WAT ,Write Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 4.--6. " WHT ,Write Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. " WST ,Write Setup Time" "0,1,2,3,4,5,6,7" group.long 0x8++0x3 line.long 0x00 "SMC0_B0ETIM,SMC0 Bank 0 Extended Timing Register" bitfld.long 0x00 16.--19. " PGWS ,Page Wait States" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--14. " IT ,Idle Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " TT ,Transition Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--5. " PREAT ,Pre Access Time" "0,1,2,3" newline bitfld.long 0x00 0.--1. " PREST ,Pre Setup Time" "0,1,2,3" group.long 0x10++0x3 line.long 0x00 "SMC0_B1CTL,SMC0 Bank 1 Control Register" bitfld.long 0x00 20.--21. " PGSZ ,Flash Page Size" "0,1,2,3" bitfld.long 0x00 14. " RDYABTEN ,ARDY Abort Enable" "0,1" bitfld.long 0x00 13. " RDYPOL ,ARDY Polarity" "0,1" bitfld.long 0x00 12. " RDYEN ,ARDY Enable" "0,1" newline bitfld.long 0x00 8.--9. " SELCTRL ,Select Control" "0,1,2,3" bitfld.long 0x00 4.--5. " MODE ,Memory Access Mode" "0,1,2,3" bitfld.long 0x00 0. " EN ,Bank 1 Enable" "0,1" group.long 0x14++0x3 line.long 0x00 "SMC0_B1TIM,SMC0 Bank 1 Timing Register" bitfld.long 0x00 24.--29. " RAT ,Read Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 20.--22. " RHT ,Read Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. " RST ,Read Setup Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--13. " WAT ,Write Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 4.--6. " WHT ,Write Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. " WST ,Write Setup Time" "0,1,2,3,4,5,6,7" group.long 0x18++0x3 line.long 0x00 "SMC0_B1ETIM,SMC0 Bank 1 Extended Timing Register" bitfld.long 0x00 16.--19. " PGWS ,Page Wait States" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--14. " IT ,Idle Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " TT ,Transition Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--5. " PREAT ,Pre Access Time" "0,1,2,3" newline bitfld.long 0x00 0.--1. " PREST ,Pre Setup Time" "0,1,2,3" group.long 0x20++0x3 line.long 0x00 "SMC0_B2CTL,SMC0 Bank 2 Control Register" bitfld.long 0x00 20.--21. " PGSZ ,Flash Page Size" "0,1,2,3" bitfld.long 0x00 14. " RDYABTEN ,ARDY Abort Enable" "0,1" bitfld.long 0x00 13. " RDYPOL ,ARDY Polarity" "0,1" bitfld.long 0x00 12. " RDYEN ,ARDY Enable" "0,1" newline bitfld.long 0x00 8.--9. " SELCTRL ,Select Control" "0,1,2,3" bitfld.long 0x00 4.--5. " MODE ,Memory Access Mode" "0,1,2,3" bitfld.long 0x00 0. " EN ,Bank 2 Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMC0_B2TIM,SMC0 Bank 2 Timing Register" bitfld.long 0x00 24.--29. " RAT ,Read Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 20.--22. " RHT ,Read Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. " RST ,Read Setup Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--13. " WAT ,Write Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 4.--6. " WHT ,Write Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. " WST ,Write Setup Time" "0,1,2,3,4,5,6,7" group.long 0x28++0x3 line.long 0x00 "SMC0_B2ETIM,SMC0 Bank 2 Extended Timing Register" bitfld.long 0x00 16.--19. " PGWS ,Page Wait States" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--14. " IT ,Idle Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " TT ,Transition Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--5. " PREAT ,Pre Access Time" "0,1,2,3" newline bitfld.long 0x00 0.--1. " PREST ,Pre Setup Time" "0,1,2,3" group.long 0x30++0x3 line.long 0x00 "SMC0_B3CTL,SMC0 Bank 3 Control Register" bitfld.long 0x00 20.--21. " PGSZ ,Flash Page Size" "0,1,2,3" bitfld.long 0x00 14. " RDYABTEN ,ARDY Abort Enable" "0,1" bitfld.long 0x00 13. " RDYPOL ,ARDY Polarity" "0,1" bitfld.long 0x00 12. " RDYEN ,ARDY Enable" "0,1" newline bitfld.long 0x00 8.--9. " SELCTRL ,Select Control" "0,1,2,3" bitfld.long 0x00 4.--5. " MODE ,Memory Access Mode" "0,1,2,3" bitfld.long 0x00 0. " EN ,Bank 3 Enable" "0,1" group.long 0x34++0x3 line.long 0x00 "SMC0_B3TIM,SMC0 Bank 3 Timing Register" bitfld.long 0x00 24.--29. " RAT ,Read Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 20.--22. " RHT ,Read Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 16.--18. " RST ,Read Setup Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--13. " WAT ,Write Access Time" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" newline bitfld.long 0x00 4.--6. " WHT ,Write Hold Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 0.--2. " WST ,Write Setup Time" "0,1,2,3,4,5,6,7" group.long 0x38++0x3 line.long 0x00 "SMC0_B3ETIM,SMC0 Bank 3 Extended Timing Register" bitfld.long 0x00 16.--19. " PGWS ,Page Wait States" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 12.--14. " IT ,Idle Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 8.--10. " TT ,Transition Time" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4.--5. " PREAT ,Pre Access Time" "0,1,2,3" newline bitfld.long 0x00 0.--1. " PREST ,Pre Setup Time" "0,1,2,3" tree.end tree "SMPU (System Memory Protection Unit)" tree "SMPU0" base ad:0x31007000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU0_CTL,SMPU0 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU0_STAT,SMPU0 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU0_IADDR,SMPU0 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU0_IDTLS,SMPU0 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU0_BADDR,SMPU0 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU0_BDTLS,SMPU0 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU0_RCTL0,SMPU0 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU0_RADDR0,SMPU0 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU0_RIDA0,SMPU0 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU0_RIDMSKA0,SMPU0 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU0_RIDB0,SMPU0 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU0_RIDMSKB0,SMPU0 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU0_RCTL1,SMPU0 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU0_RADDR1,SMPU0 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU0_RIDA1,SMPU0 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU0_RIDMSKA1,SMPU0 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU0_RIDB1,SMPU0 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU0_RIDMSKB1,SMPU0 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU0_RCTL2,SMPU0 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU0_RADDR2,SMPU0 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU0_RIDA2,SMPU0 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU0_RIDMSKA2,SMPU0 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU0_RIDB2,SMPU0 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU0_RIDMSKB2,SMPU0 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU0_RCTL3,SMPU0 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU0_RADDR3,SMPU0 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU0_RIDA3,SMPU0 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU0_RIDMSKA3,SMPU0 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU0_RIDB3,SMPU0 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU0_RIDMSKB3,SMPU0 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU0_RCTL4,SMPU0 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU0_RADDR4,SMPU0 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU0_RIDA4,SMPU0 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU0_RIDMSKA4,SMPU0 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU0_RIDB4,SMPU0 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU0_RIDMSKB4,SMPU0 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU0_RCTL5,SMPU0 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU0_RADDR5,SMPU0 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU0_RIDA5,SMPU0 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU0_RIDMSKA5,SMPU0 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU0_RIDB5,SMPU0 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU0_RIDMSKB5,SMPU0 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU0_RCTL6,SMPU0 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU0_RADDR6,SMPU0 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU0_RIDA6,SMPU0 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU0_RIDMSKA6,SMPU0 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU0_RIDB6,SMPU0 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU0_RIDMSKB6,SMPU0 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU0_RCTL7,SMPU0 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU0_RADDR7,SMPU0 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU0_RIDA7,SMPU0 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU0_RIDMSKA7,SMPU0 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU0_RIDB7,SMPU0 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU0_RIDMSKB7,SMPU0 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x1A0++0x3 line.long 0x00 "SMPU0_EXACADD0,SMPU0 Exclusive Access IDn Address" group.long 0x1A4++0x3 line.long 0x00 "SMPU0_EXACSTAT0,SMPU0 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1A8++0x3 line.long 0x00 "SMPU0_EXACADD1,SMPU0 Exclusive Access IDn Address" group.long 0x1AC++0x3 line.long 0x00 "SMPU0_EXACSTAT1,SMPU0 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1B0++0x3 line.long 0x00 "SMPU0_EXACADD2,SMPU0 Exclusive Access IDn Address" group.long 0x1B4++0x3 line.long 0x00 "SMPU0_EXACSTAT2,SMPU0 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1B8++0x3 line.long 0x00 "SMPU0_EXACADD3,SMPU0 Exclusive Access IDn Address" group.long 0x1BC++0x3 line.long 0x00 "SMPU0_EXACSTAT3,SMPU0 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x220++0x3 line.long 0x00 "SMPU0_REVID,SMPU0 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU0_SECURECTL,SMPU0 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU0_SECURERCTL0,SMPU0 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU0_SECURERCTL1,SMPU0 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU0_SECURERCTL2,SMPU0 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU0_SECURERCTL3,SMPU0 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU0_SECURERCTL4,SMPU0 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU0_SECURERCTL5,SMPU0 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU0_SECURERCTL6,SMPU0 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU0_SECURERCTL7,SMPU0 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU2" base ad:0x31083000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU2_CTL,SMPU2 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU2_STAT,SMPU2 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU2_IADDR,SMPU2 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU2_IDTLS,SMPU2 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU2_BADDR,SMPU2 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU2_BDTLS,SMPU2 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU2_RCTL0,SMPU2 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU2_RADDR0,SMPU2 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU2_RIDA0,SMPU2 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU2_RIDMSKA0,SMPU2 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU2_RIDB0,SMPU2 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU2_RIDMSKB0,SMPU2 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU2_RCTL1,SMPU2 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU2_RADDR1,SMPU2 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU2_RIDA1,SMPU2 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU2_RIDMSKA1,SMPU2 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU2_RIDB1,SMPU2 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU2_RIDMSKB1,SMPU2 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU2_RCTL2,SMPU2 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU2_RADDR2,SMPU2 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU2_RIDA2,SMPU2 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU2_RIDMSKA2,SMPU2 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU2_RIDB2,SMPU2 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU2_RIDMSKB2,SMPU2 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU2_RCTL3,SMPU2 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU2_RADDR3,SMPU2 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU2_RIDA3,SMPU2 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU2_RIDMSKA3,SMPU2 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU2_RIDB3,SMPU2 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU2_RIDMSKB3,SMPU2 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU2_RCTL4,SMPU2 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU2_RADDR4,SMPU2 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU2_RIDA4,SMPU2 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU2_RIDMSKA4,SMPU2 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU2_RIDB4,SMPU2 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU2_RIDMSKB4,SMPU2 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU2_RCTL5,SMPU2 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU2_RADDR5,SMPU2 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU2_RIDA5,SMPU2 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU2_RIDMSKA5,SMPU2 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU2_RIDB5,SMPU2 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU2_RIDMSKB5,SMPU2 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU2_RCTL6,SMPU2 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU2_RADDR6,SMPU2 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU2_RIDA6,SMPU2 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU2_RIDMSKA6,SMPU2 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU2_RIDB6,SMPU2 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU2_RIDMSKB6,SMPU2 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU2_RCTL7,SMPU2 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU2_RADDR7,SMPU2 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU2_RIDA7,SMPU2 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU2_RIDMSKA7,SMPU2 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU2_RIDB7,SMPU2 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU2_RIDMSKB7,SMPU2 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x1A0++0x3 line.long 0x00 "SMPU2_EXACADD0,SMPU2 Exclusive Access IDn Address" group.long 0x1A4++0x3 line.long 0x00 "SMPU2_EXACSTAT0,SMPU2 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1A8++0x3 line.long 0x00 "SMPU2_EXACADD1,SMPU2 Exclusive Access IDn Address" group.long 0x1AC++0x3 line.long 0x00 "SMPU2_EXACSTAT1,SMPU2 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1B0++0x3 line.long 0x00 "SMPU2_EXACADD2,SMPU2 Exclusive Access IDn Address" group.long 0x1B4++0x3 line.long 0x00 "SMPU2_EXACSTAT2,SMPU2 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1B8++0x3 line.long 0x00 "SMPU2_EXACADD3,SMPU2 Exclusive Access IDn Address" group.long 0x1BC++0x3 line.long 0x00 "SMPU2_EXACSTAT3,SMPU2 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x220++0x3 line.long 0x00 "SMPU2_REVID,SMPU2 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU2_SECURECTL,SMPU2 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU2_SECURERCTL0,SMPU2 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU2_SECURERCTL1,SMPU2 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU2_SECURERCTL2,SMPU2 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU2_SECURERCTL3,SMPU2 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU2_SECURERCTL4,SMPU2 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU2_SECURERCTL5,SMPU2 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU2_SECURERCTL6,SMPU2 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU2_SECURERCTL7,SMPU2 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU3" base ad:0x31084000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU3_CTL,SMPU3 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU3_STAT,SMPU3 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU3_IADDR,SMPU3 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU3_IDTLS,SMPU3 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU3_BADDR,SMPU3 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU3_BDTLS,SMPU3 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU3_RCTL0,SMPU3 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU3_RADDR0,SMPU3 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU3_RIDA0,SMPU3 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU3_RIDMSKA0,SMPU3 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU3_RIDB0,SMPU3 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU3_RIDMSKB0,SMPU3 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU3_RCTL1,SMPU3 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU3_RADDR1,SMPU3 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU3_RIDA1,SMPU3 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU3_RIDMSKA1,SMPU3 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU3_RIDB1,SMPU3 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU3_RIDMSKB1,SMPU3 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU3_RCTL2,SMPU3 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU3_RADDR2,SMPU3 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU3_RIDA2,SMPU3 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU3_RIDMSKA2,SMPU3 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU3_RIDB2,SMPU3 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU3_RIDMSKB2,SMPU3 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU3_RCTL3,SMPU3 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU3_RADDR3,SMPU3 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU3_RIDA3,SMPU3 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU3_RIDMSKA3,SMPU3 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU3_RIDB3,SMPU3 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU3_RIDMSKB3,SMPU3 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU3_RCTL4,SMPU3 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU3_RADDR4,SMPU3 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU3_RIDA4,SMPU3 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU3_RIDMSKA4,SMPU3 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU3_RIDB4,SMPU3 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU3_RIDMSKB4,SMPU3 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU3_RCTL5,SMPU3 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU3_RADDR5,SMPU3 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU3_RIDA5,SMPU3 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU3_RIDMSKA5,SMPU3 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU3_RIDB5,SMPU3 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU3_RIDMSKB5,SMPU3 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU3_RCTL6,SMPU3 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU3_RADDR6,SMPU3 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU3_RIDA6,SMPU3 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU3_RIDMSKA6,SMPU3 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU3_RIDB6,SMPU3 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU3_RIDMSKB6,SMPU3 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU3_RCTL7,SMPU3 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU3_RADDR7,SMPU3 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU3_RIDA7,SMPU3 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU3_RIDMSKA7,SMPU3 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU3_RIDB7,SMPU3 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU3_RIDMSKB7,SMPU3 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x220++0x3 line.long 0x00 "SMPU3_REVID,SMPU3 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU3_SECURECTL,SMPU3 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU3_SECURERCTL0,SMPU3 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU3_SECURERCTL1,SMPU3 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU3_SECURERCTL2,SMPU3 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU3_SECURERCTL3,SMPU3 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU3_SECURERCTL4,SMPU3 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU3_SECURERCTL5,SMPU3 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU3_SECURERCTL6,SMPU3 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU3_SECURERCTL7,SMPU3 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU4" base ad:0x31085000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU4_CTL,SMPU4 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU4_STAT,SMPU4 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU4_IADDR,SMPU4 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU4_IDTLS,SMPU4 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU4_BADDR,SMPU4 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU4_BDTLS,SMPU4 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU4_RCTL0,SMPU4 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU4_RADDR0,SMPU4 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU4_RIDA0,SMPU4 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU4_RIDMSKA0,SMPU4 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU4_RIDB0,SMPU4 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU4_RIDMSKB0,SMPU4 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU4_RCTL1,SMPU4 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU4_RADDR1,SMPU4 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU4_RIDA1,SMPU4 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU4_RIDMSKA1,SMPU4 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU4_RIDB1,SMPU4 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU4_RIDMSKB1,SMPU4 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU4_RCTL2,SMPU4 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU4_RADDR2,SMPU4 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU4_RIDA2,SMPU4 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU4_RIDMSKA2,SMPU4 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU4_RIDB2,SMPU4 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU4_RIDMSKB2,SMPU4 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU4_RCTL3,SMPU4 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU4_RADDR3,SMPU4 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU4_RIDA3,SMPU4 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU4_RIDMSKA3,SMPU4 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU4_RIDB3,SMPU4 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU4_RIDMSKB3,SMPU4 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU4_RCTL4,SMPU4 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU4_RADDR4,SMPU4 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU4_RIDA4,SMPU4 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU4_RIDMSKA4,SMPU4 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU4_RIDB4,SMPU4 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU4_RIDMSKB4,SMPU4 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU4_RCTL5,SMPU4 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU4_RADDR5,SMPU4 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU4_RIDA5,SMPU4 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU4_RIDMSKA5,SMPU4 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU4_RIDB5,SMPU4 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU4_RIDMSKB5,SMPU4 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU4_RCTL6,SMPU4 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU4_RADDR6,SMPU4 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU4_RIDA6,SMPU4 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU4_RIDMSKA6,SMPU4 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU4_RIDB6,SMPU4 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU4_RIDMSKB6,SMPU4 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU4_RCTL7,SMPU4 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU4_RADDR7,SMPU4 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU4_RIDA7,SMPU4 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU4_RIDMSKA7,SMPU4 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU4_RIDB7,SMPU4 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU4_RIDMSKB7,SMPU4 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x220++0x3 line.long 0x00 "SMPU4_REVID,SMPU4 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU4_SECURECTL,SMPU4 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU4_SECURERCTL0,SMPU4 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU4_SECURERCTL1,SMPU4 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU4_SECURERCTL2,SMPU4 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU4_SECURERCTL3,SMPU4 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU4_SECURERCTL4,SMPU4 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU4_SECURERCTL5,SMPU4 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU4_SECURERCTL6,SMPU4 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU4_SECURERCTL7,SMPU4 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU5" base ad:0x31086000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU5_CTL,SMPU5 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU5_STAT,SMPU5 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU5_IADDR,SMPU5 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU5_IDTLS,SMPU5 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU5_BADDR,SMPU5 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU5_BDTLS,SMPU5 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU5_RCTL0,SMPU5 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU5_RADDR0,SMPU5 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU5_RIDA0,SMPU5 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU5_RIDMSKA0,SMPU5 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU5_RIDB0,SMPU5 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU5_RIDMSKB0,SMPU5 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU5_RCTL1,SMPU5 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU5_RADDR1,SMPU5 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU5_RIDA1,SMPU5 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU5_RIDMSKA1,SMPU5 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU5_RIDB1,SMPU5 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU5_RIDMSKB1,SMPU5 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU5_RCTL2,SMPU5 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU5_RADDR2,SMPU5 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU5_RIDA2,SMPU5 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU5_RIDMSKA2,SMPU5 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU5_RIDB2,SMPU5 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU5_RIDMSKB2,SMPU5 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU5_RCTL3,SMPU5 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU5_RADDR3,SMPU5 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU5_RIDA3,SMPU5 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU5_RIDMSKA3,SMPU5 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU5_RIDB3,SMPU5 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU5_RIDMSKB3,SMPU5 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU5_RCTL4,SMPU5 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU5_RADDR4,SMPU5 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU5_RIDA4,SMPU5 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU5_RIDMSKA4,SMPU5 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU5_RIDB4,SMPU5 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU5_RIDMSKB4,SMPU5 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU5_RCTL5,SMPU5 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU5_RADDR5,SMPU5 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU5_RIDA5,SMPU5 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU5_RIDMSKA5,SMPU5 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU5_RIDB5,SMPU5 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU5_RIDMSKB5,SMPU5 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU5_RCTL6,SMPU5 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU5_RADDR6,SMPU5 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU5_RIDA6,SMPU5 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU5_RIDMSKA6,SMPU5 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU5_RIDB6,SMPU5 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU5_RIDMSKB6,SMPU5 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU5_RCTL7,SMPU5 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU5_RADDR7,SMPU5 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU5_RIDA7,SMPU5 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU5_RIDMSKA7,SMPU5 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU5_RIDB7,SMPU5 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU5_RIDMSKB7,SMPU5 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x220++0x3 line.long 0x00 "SMPU5_REVID,SMPU5 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU5_SECURECTL,SMPU5 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU5_SECURERCTL0,SMPU5 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU5_SECURERCTL1,SMPU5 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU5_SECURERCTL2,SMPU5 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU5_SECURERCTL3,SMPU5 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU5_SECURERCTL4,SMPU5 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU5_SECURERCTL5,SMPU5 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU5_SECURERCTL6,SMPU5 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU5_SECURERCTL7,SMPU5 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU6" base ad:0x31087000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU6_CTL,SMPU6 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU6_STAT,SMPU6 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU6_IADDR,SMPU6 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU6_IDTLS,SMPU6 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU6_BADDR,SMPU6 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU6_BDTLS,SMPU6 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU6_RCTL0,SMPU6 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU6_RADDR0,SMPU6 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU6_RIDA0,SMPU6 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU6_RIDMSKA0,SMPU6 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU6_RIDB0,SMPU6 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU6_RIDMSKB0,SMPU6 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU6_RCTL1,SMPU6 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU6_RADDR1,SMPU6 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU6_RIDA1,SMPU6 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU6_RIDMSKA1,SMPU6 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU6_RIDB1,SMPU6 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU6_RIDMSKB1,SMPU6 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU6_RCTL2,SMPU6 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU6_RADDR2,SMPU6 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU6_RIDA2,SMPU6 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU6_RIDMSKA2,SMPU6 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU6_RIDB2,SMPU6 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU6_RIDMSKB2,SMPU6 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU6_RCTL3,SMPU6 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU6_RADDR3,SMPU6 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU6_RIDA3,SMPU6 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU6_RIDMSKA3,SMPU6 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU6_RIDB3,SMPU6 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU6_RIDMSKB3,SMPU6 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU6_RCTL4,SMPU6 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU6_RADDR4,SMPU6 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU6_RIDA4,SMPU6 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU6_RIDMSKA4,SMPU6 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU6_RIDB4,SMPU6 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU6_RIDMSKB4,SMPU6 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU6_RCTL5,SMPU6 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU6_RADDR5,SMPU6 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU6_RIDA5,SMPU6 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU6_RIDMSKA5,SMPU6 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU6_RIDB5,SMPU6 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU6_RIDMSKB5,SMPU6 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU6_RCTL6,SMPU6 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU6_RADDR6,SMPU6 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU6_RIDA6,SMPU6 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU6_RIDMSKA6,SMPU6 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU6_RIDB6,SMPU6 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU6_RIDMSKB6,SMPU6 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU6_RCTL7,SMPU6 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU6_RADDR7,SMPU6 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU6_RIDA7,SMPU6 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU6_RIDMSKA7,SMPU6 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU6_RIDB7,SMPU6 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU6_RIDMSKB7,SMPU6 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x220++0x3 line.long 0x00 "SMPU6_REVID,SMPU6 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU6_SECURECTL,SMPU6 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU6_SECURERCTL0,SMPU6 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU6_SECURERCTL1,SMPU6 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU6_SECURERCTL2,SMPU6 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU6_SECURERCTL3,SMPU6 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU6_SECURERCTL4,SMPU6 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU6_SECURERCTL5,SMPU6 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU6_SECURERCTL6,SMPU6 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU6_SECURERCTL7,SMPU6 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU7" base ad:0x31088000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU7_CTL,SMPU7 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU7_STAT,SMPU7 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU7_IADDR,SMPU7 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU7_IDTLS,SMPU7 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU7_BADDR,SMPU7 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU7_BDTLS,SMPU7 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU7_RCTL0,SMPU7 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU7_RADDR0,SMPU7 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU7_RIDA0,SMPU7 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU7_RIDMSKA0,SMPU7 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU7_RIDB0,SMPU7 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU7_RIDMSKB0,SMPU7 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU7_RCTL1,SMPU7 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU7_RADDR1,SMPU7 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU7_RIDA1,SMPU7 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU7_RIDMSKA1,SMPU7 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU7_RIDB1,SMPU7 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU7_RIDMSKB1,SMPU7 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU7_RCTL2,SMPU7 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU7_RADDR2,SMPU7 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU7_RIDA2,SMPU7 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU7_RIDMSKA2,SMPU7 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU7_RIDB2,SMPU7 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU7_RIDMSKB2,SMPU7 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU7_RCTL3,SMPU7 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU7_RADDR3,SMPU7 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU7_RIDA3,SMPU7 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU7_RIDMSKA3,SMPU7 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU7_RIDB3,SMPU7 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU7_RIDMSKB3,SMPU7 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU7_RCTL4,SMPU7 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU7_RADDR4,SMPU7 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU7_RIDA4,SMPU7 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU7_RIDMSKA4,SMPU7 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU7_RIDB4,SMPU7 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU7_RIDMSKB4,SMPU7 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU7_RCTL5,SMPU7 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU7_RADDR5,SMPU7 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU7_RIDA5,SMPU7 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU7_RIDMSKA5,SMPU7 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU7_RIDB5,SMPU7 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU7_RIDMSKB5,SMPU7 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU7_RCTL6,SMPU7 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU7_RADDR6,SMPU7 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU7_RIDA6,SMPU7 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU7_RIDMSKA6,SMPU7 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU7_RIDB6,SMPU7 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU7_RIDMSKB6,SMPU7 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU7_RCTL7,SMPU7 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU7_RADDR7,SMPU7 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU7_RIDA7,SMPU7 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU7_RIDMSKA7,SMPU7 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU7_RIDB7,SMPU7 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU7_RIDMSKB7,SMPU7 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x220++0x3 line.long 0x00 "SMPU7_REVID,SMPU7 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU7_SECURECTL,SMPU7 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU7_SECURERCTL0,SMPU7 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU7_SECURERCTL1,SMPU7 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU7_SECURERCTL2,SMPU7 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU7_SECURERCTL3,SMPU7 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU7_SECURERCTL4,SMPU7 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU7_SECURERCTL5,SMPU7 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU7_SECURERCTL6,SMPU7 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU7_SECURERCTL7,SMPU7 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU8" base ad:0x31099000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU8_CTL,SMPU8 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU8_STAT,SMPU8 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU8_IADDR,SMPU8 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU8_IDTLS,SMPU8 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU8_BADDR,SMPU8 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU8_BDTLS,SMPU8 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU8_RCTL0,SMPU8 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU8_RADDR0,SMPU8 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU8_RIDA0,SMPU8 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU8_RIDMSKA0,SMPU8 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU8_RIDB0,SMPU8 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU8_RIDMSKB0,SMPU8 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU8_RCTL1,SMPU8 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU8_RADDR1,SMPU8 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU8_RIDA1,SMPU8 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU8_RIDMSKA1,SMPU8 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU8_RIDB1,SMPU8 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU8_RIDMSKB1,SMPU8 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU8_RCTL2,SMPU8 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU8_RADDR2,SMPU8 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU8_RIDA2,SMPU8 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU8_RIDMSKA2,SMPU8 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU8_RIDB2,SMPU8 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU8_RIDMSKB2,SMPU8 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU8_RCTL3,SMPU8 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU8_RADDR3,SMPU8 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU8_RIDA3,SMPU8 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU8_RIDMSKA3,SMPU8 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU8_RIDB3,SMPU8 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU8_RIDMSKB3,SMPU8 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU8_RCTL4,SMPU8 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU8_RADDR4,SMPU8 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU8_RIDA4,SMPU8 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU8_RIDMSKA4,SMPU8 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU8_RIDB4,SMPU8 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU8_RIDMSKB4,SMPU8 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU8_RCTL5,SMPU8 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU8_RADDR5,SMPU8 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU8_RIDA5,SMPU8 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU8_RIDMSKA5,SMPU8 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU8_RIDB5,SMPU8 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU8_RIDMSKB5,SMPU8 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU8_RCTL6,SMPU8 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU8_RADDR6,SMPU8 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU8_RIDA6,SMPU8 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU8_RIDMSKA6,SMPU8 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU8_RIDB6,SMPU8 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU8_RIDMSKB6,SMPU8 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU8_RCTL7,SMPU8 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU8_RADDR7,SMPU8 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU8_RIDA7,SMPU8 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU8_RIDMSKA7,SMPU8 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU8_RIDB7,SMPU8 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU8_RIDMSKB7,SMPU8 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x220++0x3 line.long 0x00 "SMPU8_REVID,SMPU8 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU8_SECURECTL,SMPU8 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU8_SECURERCTL0,SMPU8 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU8_SECURERCTL1,SMPU8 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU8_SECURERCTL2,SMPU8 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU8_SECURERCTL3,SMPU8 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU8_SECURERCTL4,SMPU8 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU8_SECURERCTL5,SMPU8 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU8_SECURERCTL6,SMPU8 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU8_SECURERCTL7,SMPU8 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU9" base ad:0x310A0000 width 19. group.long 0x0++0x3 line.long 0x00 "SMPU9_CTL,SMPU9 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU9_STAT,SMPU9 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU9_IADDR,SMPU9 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU9_IDTLS,SMPU9 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU9_BADDR,SMPU9 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU9_BDTLS,SMPU9 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU9_RCTL0,SMPU9 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU9_RADDR0,SMPU9 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU9_RIDA0,SMPU9 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU9_RIDMSKA0,SMPU9 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU9_RIDB0,SMPU9 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU9_RIDMSKB0,SMPU9 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU9_RCTL1,SMPU9 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU9_RADDR1,SMPU9 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU9_RIDA1,SMPU9 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU9_RIDMSKA1,SMPU9 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU9_RIDB1,SMPU9 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU9_RIDMSKB1,SMPU9 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU9_RCTL2,SMPU9 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU9_RADDR2,SMPU9 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU9_RIDA2,SMPU9 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU9_RIDMSKA2,SMPU9 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU9_RIDB2,SMPU9 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU9_RIDMSKB2,SMPU9 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU9_RCTL3,SMPU9 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU9_RADDR3,SMPU9 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU9_RIDA3,SMPU9 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU9_RIDMSKA3,SMPU9 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU9_RIDB3,SMPU9 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU9_RIDMSKB3,SMPU9 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU9_RCTL4,SMPU9 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU9_RADDR4,SMPU9 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU9_RIDA4,SMPU9 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU9_RIDMSKA4,SMPU9 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU9_RIDB4,SMPU9 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU9_RIDMSKB4,SMPU9 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU9_RCTL5,SMPU9 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU9_RADDR5,SMPU9 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU9_RIDA5,SMPU9 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU9_RIDMSKA5,SMPU9 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU9_RIDB5,SMPU9 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU9_RIDMSKB5,SMPU9 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU9_RCTL6,SMPU9 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU9_RADDR6,SMPU9 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU9_RIDA6,SMPU9 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU9_RIDMSKA6,SMPU9 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU9_RIDB6,SMPU9 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU9_RIDMSKB6,SMPU9 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU9_RCTL7,SMPU9 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU9_RADDR7,SMPU9 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU9_RIDA7,SMPU9 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU9_RIDMSKA7,SMPU9 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU9_RIDB7,SMPU9 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU9_RIDMSKB7,SMPU9 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x1A0++0x3 line.long 0x00 "SMPU9_EXACADD0,SMPU9 Exclusive Access IDn Address" group.long 0x1A4++0x3 line.long 0x00 "SMPU9_EXACSTAT0,SMPU9 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1A8++0x3 line.long 0x00 "SMPU9_EXACADD1,SMPU9 Exclusive Access IDn Address" group.long 0x1AC++0x3 line.long 0x00 "SMPU9_EXACSTAT1,SMPU9 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1B0++0x3 line.long 0x00 "SMPU9_EXACADD2,SMPU9 Exclusive Access IDn Address" group.long 0x1B4++0x3 line.long 0x00 "SMPU9_EXACSTAT2,SMPU9 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1B8++0x3 line.long 0x00 "SMPU9_EXACADD3,SMPU9 Exclusive Access IDn Address" group.long 0x1BC++0x3 line.long 0x00 "SMPU9_EXACSTAT3,SMPU9 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x220++0x3 line.long 0x00 "SMPU9_REVID,SMPU9 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU9_SECURECTL,SMPU9 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU9_SECURERCTL0,SMPU9 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU9_SECURERCTL1,SMPU9 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU9_SECURERCTL2,SMPU9 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU9_SECURERCTL3,SMPU9 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU9_SECURERCTL4,SMPU9 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU9_SECURERCTL5,SMPU9 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU9_SECURERCTL6,SMPU9 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU9_SECURERCTL7,SMPU9 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree "SMPU10" base ad:0x310A1000 width 20. group.long 0x0++0x3 line.long 0x00 "SMPU10_CTL,SMPU10 SMPU Control Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 4. " RLOCK ,RCTLn, RADDRn, RIDxn and RIDMxn Registers Lock Bit" "0,1" bitfld.long 0x00 3. " PINTEN ,Protection Violation Interrupt Enable" "0,1" bitfld.long 0x00 2. " PBETYPE ,Protection Violation Bus Error Type" "0,1" newline bitfld.long 0x00 1. " PBEDIS ,Protection Violation Bus Error Disable" "0,1" bitfld.long 0x00 0. " RSDIS ,Read Speculation Disable" "0,1" group.long 0x4++0x3 line.long 0x00 "SMPU10_STAT,SMPU10 SMPU Status Register" bitfld.long 0x00 17. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 16. " ADRERR ,Address Error" "0,1" bitfld.long 0x00 3. " BEOVR ,Bus Error Overrun" "0,1" bitfld.long 0x00 2. " BERR ,Bus Error" "0,1" newline bitfld.long 0x00 1. " IOVR ,Interrupt Overrun" "0,1" bitfld.long 0x00 0. " IRQ ,Interrupt Request" "0,1" group.long 0x8++0x3 line.long 0x00 "SMPU10_IADDR,SMPU10 Interrupt Address Register" group.long 0xC++0x3 line.long 0x00 "SMPU10_IDTLS,SMPU10 Interrupt Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status" "0,1" group.long 0x10++0x3 line.long 0x00 "SMPU10_BADDR,SMPU10 Bus Error Address Register" group.long 0x14++0x3 line.long 0x00 "SMPU10_BDTLS,SMPU10 Bus Error Details Register" hexmask.long.word 0x00 8.--20. 1. " ID ,ID of Transaction" bitfld.long 0x00 1. " RNW ,Read/Write Status" "0,1" bitfld.long 0x00 0. " SECURE ,Secure Status Register" "0,1" group.long 0x20++0x3 line.long 0x00 "SMPU10_RCTL0,SMPU10 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SMPU10_RADDR0,SMPU10 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x28++0x3 line.long 0x00 "SMPU10_RIDA0,SMPU10 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x2C++0x3 line.long 0x00 "SMPU10_RIDMSKA0,SMPU10 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x30++0x3 line.long 0x00 "SMPU10_RIDB0,SMPU10 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x34++0x3 line.long 0x00 "SMPU10_RIDMSKB0,SMPU10 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x38++0x3 line.long 0x00 "SMPU10_RCTL1,SMPU10 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x3C++0x3 line.long 0x00 "SMPU10_RADDR1,SMPU10 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x40++0x3 line.long 0x00 "SMPU10_RIDA1,SMPU10 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x44++0x3 line.long 0x00 "SMPU10_RIDMSKA1,SMPU10 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x48++0x3 line.long 0x00 "SMPU10_RIDB1,SMPU10 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x4C++0x3 line.long 0x00 "SMPU10_RIDMSKB1,SMPU10 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x50++0x3 line.long 0x00 "SMPU10_RCTL2,SMPU10 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x54++0x3 line.long 0x00 "SMPU10_RADDR2,SMPU10 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x58++0x3 line.long 0x00 "SMPU10_RIDA2,SMPU10 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x5C++0x3 line.long 0x00 "SMPU10_RIDMSKA2,SMPU10 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x60++0x3 line.long 0x00 "SMPU10_RIDB2,SMPU10 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x64++0x3 line.long 0x00 "SMPU10_RIDMSKB2,SMPU10 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x68++0x3 line.long 0x00 "SMPU10_RCTL3,SMPU10 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x6C++0x3 line.long 0x00 "SMPU10_RADDR3,SMPU10 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x70++0x3 line.long 0x00 "SMPU10_RIDA3,SMPU10 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x74++0x3 line.long 0x00 "SMPU10_RIDMSKA3,SMPU10 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x78++0x3 line.long 0x00 "SMPU10_RIDB3,SMPU10 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x7C++0x3 line.long 0x00 "SMPU10_RIDMSKB3,SMPU10 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x80++0x3 line.long 0x00 "SMPU10_RCTL4,SMPU10 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x84++0x3 line.long 0x00 "SMPU10_RADDR4,SMPU10 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0x88++0x3 line.long 0x00 "SMPU10_RIDA4,SMPU10 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0x8C++0x3 line.long 0x00 "SMPU10_RIDMSKA4,SMPU10 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0x90++0x3 line.long 0x00 "SMPU10_RIDB4,SMPU10 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0x94++0x3 line.long 0x00 "SMPU10_RIDMSKB4,SMPU10 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x98++0x3 line.long 0x00 "SMPU10_RCTL5,SMPU10 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0x9C++0x3 line.long 0x00 "SMPU10_RADDR5,SMPU10 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xA0++0x3 line.long 0x00 "SMPU10_RIDA5,SMPU10 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xA4++0x3 line.long 0x00 "SMPU10_RIDMSKA5,SMPU10 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xA8++0x3 line.long 0x00 "SMPU10_RIDB5,SMPU10 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xAC++0x3 line.long 0x00 "SMPU10_RIDMSKB5,SMPU10 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xB0++0x3 line.long 0x00 "SMPU10_RCTL6,SMPU10 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xB4++0x3 line.long 0x00 "SMPU10_RADDR6,SMPU10 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xB8++0x3 line.long 0x00 "SMPU10_RIDA6,SMPU10 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xBC++0x3 line.long 0x00 "SMPU10_RIDMSKA6,SMPU10 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xC0++0x3 line.long 0x00 "SMPU10_RIDB6,SMPU10 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xC4++0x3 line.long 0x00 "SMPU10_RIDMSKB6,SMPU10 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0xC8++0x3 line.long 0x00 "SMPU10_RCTL7,SMPU10 Region n Control Register" bitfld.long 0x00 11. " WIDCINV ,Write Transaction ID Compare Invert" "0,1" bitfld.long 0x00 10. " WPROTEN ,Write Transaction Protection Enable" "0,1" bitfld.long 0x00 9. " RIDCINV ,Read Transaction ID Compare Invert" "0,1" bitfld.long 0x00 8. " RPROTEN ,Read Transaction Protection Enable" "0,1" newline bitfld.long 0x00 1.--5. " SIZE ,Memory Region Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 0. " EN ,Region Enable" "0,1" group.long 0xCC++0x3 line.long 0x00 "SMPU10_RADDR7,SMPU10 Region n Address Register" hexmask.long.tbyte 0x00 12.--31. 1. " BADDR ,Region n Base Address 20 Most Significant Bits" group.long 0xD0++0x3 line.long 0x00 "SMPU10_RIDA7,SMPU10 Region n ID A Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register A" group.long 0xD4++0x3 line.long 0x00 "SMPU10_RIDMSKA7,SMPU10 Region n ID Mask A Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register A" group.long 0xD8++0x3 line.long 0x00 "SMPU10_RIDB7,SMPU10 Region n ID B Register" hexmask.long.word 0x00 0.--12. 1. " ID ,Region n ID Register B" group.long 0xDC++0x3 line.long 0x00 "SMPU10_RIDMSKB7,SMPU10 Region n ID Mask B Register" hexmask.long.word 0x00 0.--12. 1. " MSK ,Region n ID Mask Register B" group.long 0x1A0++0x3 line.long 0x00 "SMPU10_EXACADD0,SMPU10 Exclusive Access IDn Address" group.long 0x1A4++0x3 line.long 0x00 "SMPU10_EXACSTAT0,SMPU10 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1A8++0x3 line.long 0x00 "SMPU10_EXACADD1,SMPU10 Exclusive Access IDn Address" group.long 0x1AC++0x3 line.long 0x00 "SMPU10_EXACSTAT1,SMPU10 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1B0++0x3 line.long 0x00 "SMPU10_EXACADD2,SMPU10 Exclusive Access IDn Address" group.long 0x1B4++0x3 line.long 0x00 "SMPU10_EXACSTAT2,SMPU10 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x1B8++0x3 line.long 0x00 "SMPU10_EXACADD3,SMPU10 Exclusive Access IDn Address" group.long 0x1BC++0x3 line.long 0x00 "SMPU10_EXACSTAT3,SMPU10 Exclusive Access Status" hexmask.long.word 0x00 8.--20. 1. " ARID ,Exclusive Access ID" bitfld.long 0x00 5.--7. " ARSIZE ,Exclusive Access Read Size" "0,1,2,3,4,5,6,7" bitfld.long 0x00 1.--4. " ARLEN ,Exclusive Access Read Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0. " VALID ,Valid Exclusive Access Read" "0,1" group.long 0x220++0x3 line.long 0x00 "SMPU10_REVID,SMPU10 SMPU Revision ID Register" bitfld.long 0x00 4.--7. " MAJOR ,Major Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 0.--3. " REV ,Incremental Version ID" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x800++0x3 line.long 0x00 "SMPU10_SECURECTL,SMPU10 SMPU Control Secure Accesses Register" bitfld.long 0x00 31. " LOCK ,Lock Bit" "0,1" bitfld.long 0x00 11. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 10. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 9. " RSECDIS ,Secure Read Transaction Disable" "0,1" newline bitfld.long 0x00 8. " RNSEN ,Non-secure Read Transaction Enable" "0,1" bitfld.long 0x00 3. " RLOCK ,Secure Region Registers Lock Bit" "0,1" bitfld.long 0x00 2. " SINTEN ,Security Violation Interrupt Enable" "0,1" bitfld.long 0x00 1. " SBETYPE ,Security Violation Bus Error Type" "0,1" newline bitfld.long 0x00 0. " SBEDIS ,Security Violation Bus Error Disable" "0,1" group.long 0x820++0x3 line.long 0x00 "SMPU10_SECURERCTL0,SMPU10 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x824++0x3 line.long 0x00 "SMPU10_SECURERCTL1,SMPU10 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x828++0x3 line.long 0x00 "SMPU10_SECURERCTL2,SMPU10 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x82C++0x3 line.long 0x00 "SMPU10_SECURERCTL3,SMPU10 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x830++0x3 line.long 0x00 "SMPU10_SECURERCTL4,SMPU10 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x834++0x3 line.long 0x00 "SMPU10_SECURERCTL5,SMPU10 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x838++0x3 line.long 0x00 "SMPU10_SECURERCTL6,SMPU10 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" group.long 0x83C++0x3 line.long 0x00 "SMPU10_SECURERCTL7,SMPU10 Region n Control Secure Accesses Register" bitfld.long 0x00 3. " WSECDIS ,Secure Write Transaction Disable" "0,1" bitfld.long 0x00 2. " WNSEN ,Non-secure Write Transaction Enable" "0,1" bitfld.long 0x00 1. " RSECDIS ,Secure Read Transaction Disable" "0,1" bitfld.long 0x00 0. " RNSEN ,Non-secure Read Transaction Enable" "0,1" tree.end tree.end tree "SPDIF (Sony/Philips Digital Interface)" tree "SPDIF0" base ad:0x310C9280 width 20. group.long 0x0++0x3 line.long 0x00 "SPDIF0_TX_CTL,SPDIF0 Transmit Control Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE0B ,Channel Status Byte for Subframe B" hexmask.long.byte 0x00 16.--23. 1. " BYTE0A ,Channel Status Byte for Subframe A" bitfld.long 0x00 15. " EXTSYNC ,External Sync Enable" "0,1" bitfld.long 0x00 13. " USRPEND ,User Bits Pending" "0,1" newline bitfld.long 0x00 12. " BLKSTART ,Block Start" "0,1" bitfld.long 0x00 11. " VALIDR ,Validity Bit B" "0,1" bitfld.long 0x00 10. " VALIDL ,Validity Bit A" "0,1" bitfld.long 0x00 9. " AUTO ,Automatically Generate Block Start" "0,1" newline bitfld.long 0x00 6.--8. " SMODEIN ,Serial Data Input Format" "0,1,2,3,4,5,6,7" bitfld.long 0x00 5. " SCDFLR ,Select L/R Single-Channel, Double-Frequency Mode" "0,1" bitfld.long 0x00 4. " SCDF ,Single-Channel, Double-Frequency Mode Enable" "0,1" bitfld.long 0x00 2.--3. " FREQ ,Frequency Multiplier" "0,1,2,3" newline bitfld.long 0x00 1. " MUTE ,Mute" "0,1" bitfld.long 0x00 0. " EN ,Transmitter Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SPDIF0_TX_STAT_A0,SPDIF0 Transmit Status A0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE4 ,Byte 4 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE3 ,Byte 3 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE2 ,Byte 2 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE1 ,Byte 1 Sub Frame A" group.long 0x8++0x3 line.long 0x00 "SPDIF0_TX_STAT_B0,SPDIF0 Transmit Status B0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE4 ,Byte 4 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE3 ,Byte 3 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE2 ,Byte 2 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE1 ,Byte 1 Sub Frame B" group.long 0x20++0x3 line.long 0x00 "SPDIF0_RX_CTL,SPDIF0 Receive Control" bitfld.long 0x00 9.--11. " TDMSEL ,Select TDM clock frequency" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4. " RST ,Reset SPDIF Receiver" "0,1" bitfld.long 0x00 3. " RSTRTAUDIO ,Restart Audio" "0,1" bitfld.long 0x00 2. " FASTLOCK ,Fast Lock Select" "0,1" newline bitfld.long 0x00 1. " STRENGTH ,FS strength Control" "0,1" bitfld.long 0x00 0. " EN ,SPDIF Receiver Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SPDIF0_RX_STAT,SPDIF0 Receive Status Register" hexmask.long.word 0x00 16.--31. 1. " COMPMODE ,Compression Mode" bitfld.long 0x00 12.--15. " WLCHANB ,Word Length Channel B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " WLCHANA ,Word Length Channel A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " LOCKLOSS ,Loss of Lock (sticky)" "0,1" newline bitfld.long 0x00 3. " LOCK ,Lock Receiver" "0,1" bitfld.long 0x00 2. " VALID ,Validity Bit" "0,1" bitfld.long 0x00 1. " COMPTYPE ,Compression Type" "0,1" bitfld.long 0x00 0. " AUDIOTYPE ,Audio Type" "0,1" group.long 0x28++0x3 line.long 0x00 "SPDIF0_RX_STAT0_A,SPDIF0 Receive Status A0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,CS Byte 3" hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,CS Byte 2" hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,CS Byte 1" hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,CS Byte 0" group.long 0x2C++0x3 line.long 0x00 "SPDIF0_RX_STAT0_B,SPDIF0 Receive Status B0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,CS Byte 3" hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,CS Byte 2" hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,CS Byte 1" hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,CS Byte 0" group.long 0x30++0x3 line.long 0x00 "SPDIF0_RX_STAT1_A,SPDIF0 Receive Status A1 Register" hexmask.long.byte 0x00 0.--7. 1. " BYTE4 ,CS Byte 4" group.long 0x34++0x3 line.long 0x00 "SPDIF0_RX_STAT1_B,SPDIF0 Receive Status B1 Register" hexmask.long.byte 0x00 0.--7. 1. " BYTE4 ,CS Byte 4" group.long 0xD0++0x3 line.long 0x00 "SPDIF0_TX_STAT_A1,SPDIF0 Transmit Status A1 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE8 ,Byte 8 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE7 ,Byte 7 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE6 ,Byte 6 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE5 ,Byte 5 Sub Frame A" group.long 0xD4++0x3 line.long 0x00 "SPDIF0_TX_STAT_A2,SPDIF0 Transmit Status A2 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE12 ,Byte 12 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE11 ,Byte 11 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE10 ,Byte 10 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE9 ,Byte 9 Sub Frame A" group.long 0xD8++0x3 line.long 0x00 "SPDIF0_TX_STAT_A3,SPDIF0 Transmit Status A3 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE16 ,Byte 16 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE15 ,Byte 15 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE14 ,Byte 14 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE13 ,Byte 13 Sub Frame A" group.long 0xDC++0x3 line.long 0x00 "SPDIF0_TX_STAT_A4,SPDIF0 Transmit Status A4 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE20 ,Byte 20 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE19 ,Byte 19 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE18 ,Byte 18 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE17 ,Byte 17 Sub Frame A" group.long 0xE0++0x3 line.long 0x00 "SPDIF0_TX_STAT_A5,SPDIF0 Transmit Status A5 Register" hexmask.long.byte 0x00 16.--23. 1. " BYTE23 ,Byte 23 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE22 ,Byte 22 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE21 ,Byte 21 Sub Frame A" group.long 0xE8++0x3 line.long 0x00 "SPDIF0_TX_STAT_B1,SPDIF0 Transmit Status B1 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE8 ,Byte 8 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE7 ,Byte 7 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE6 ,Byte 6 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE5 ,Byte 5 Sub Frame B" group.long 0xEC++0x3 line.long 0x00 "SPDIF0_TX_STAT_B2,SPDIF0 Transmit Status B2 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE12 ,Byte 12 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE11 ,Byte 11 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE10 ,Byte 10 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE9 ,Byte 9 Sub Frame B" group.long 0xF0++0x3 line.long 0x00 "SPDIF0_TX_STAT_B3,SPDIF0 Transmit Status B3 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE16 ,Byte 16 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE15 ,Byte 15 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE14 ,Byte 14 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE13 ,Byte 13 Sub Frame B" group.long 0xF4++0x3 line.long 0x00 "SPDIF0_TX_STAT_B4,SPDIF0 Transmit Status B4 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE20 ,Byte 20 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE19 ,Byte 19 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE18 ,Byte 18 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE17 ,Byte 17 Sub Frame B" group.long 0xF8++0x3 line.long 0x00 "SPDIF0_TX_STAT_B5,SPDIF0 Transmit Status B5 Register" hexmask.long.byte 0x00 16.--23. 1. " BYTE23 ,Byte 23 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE22 ,Byte 22 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE21 ,Byte 21 Sub Frame B" group.long 0x100++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_A0,SPDIF0 Transmit User Buffer A0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,Byte 3 of Subframe A User Bit Buffer" hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,Byte 2 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,Byte 1 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,Byte 0 Sub Frame A" group.long 0x104++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_A1,SPDIF0 Transmit User Buffer A1 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE7 ,Byte 7 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE6 ,Byte 6 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE5 ,Byte 5 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE4 ,Byte 4 Sub Frame A" group.long 0x108++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_A2,SPDIF0 Transmit User Buffer A2 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE11 ,Byte 11 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE10 ,Byte 10 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE9 ,Byte 9 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE8 ,Byte 8 Sub Frame A" group.long 0x10C++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_A3,SPDIF0 Transmit User Buffer A3 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE15 ,Byte 15 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE14 ,Byte 14 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE13 ,Byte 13 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE12 ,Byte 12 Sub Frame A" group.long 0x110++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_A4,SPDIF0 Transmit User Buffer A4 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE19 ,Byte 19 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE18 ,Byte 18 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE17 ,Byte 17 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE16 ,Byte 16 Sub Frame A" group.long 0x114++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_A5,SPDIF0 Transmit User Buffer A5 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE23 ,Byte 23 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE22 ,Byte 22 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE21 ,Byte 21 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE20 ,Byte 20 Sub Frame A" group.long 0x120++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_B0,SPDIF0 Transmit User Buffer B0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,Byte 3 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,Byte 2 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,Byte 1 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,Byte 0 Sub Frame B" group.long 0x124++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_B1,SPDIF0 Transmit User Buffer B1 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE7 ,Byte 7 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE6 ,Byte 6 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE5 ,Byte 5 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE4 ,Byte 4 Sub Frame B" group.long 0x128++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_B2,SPDIF0 Transmit User Buffer B2 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE11 ,Byte 11 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE10 ,Byte 10 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE9 ,Byte 9 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE8 ,Byte 8 Sub Frame B" group.long 0x12C++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_B3,SPDIF0 Transmit User Buffer B3 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE15 ,Byte 15 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE14 ,Byte 14 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE13 ,Byte 13 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE12 ,Byte 12 Sub Frame B" group.long 0x130++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_B4,SPDIF0 Transmit User Buffer B4 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE19 ,Byte 19 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE18 ,Byte 18 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE17 ,Byte 17 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE16 ,Byte 16 Sub Frame B" group.long 0x134++0x3 line.long 0x00 "SPDIF0_TX_UBUFF_B5,SPDIF0 Transmit User Buffer B5 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE23 ,Byte 23 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE22 ,Byte 22 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE21 ,Byte 21 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE20 ,Byte 20 Sub Frame B" group.long 0x13C++0x3 line.long 0x00 "SPDIF0_TX_USRUPDT,SPDIF0 User Bit Update Register" bitfld.long 0x00 0. " EN ,Enable" "0,1" tree.end tree "SPDIF1" base ad:0x310CB280 width 20. group.long 0x0++0x3 line.long 0x00 "SPDIF1_TX_CTL,SPDIF1 Transmit Control Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE0B ,Channel Status Byte for Subframe B" hexmask.long.byte 0x00 16.--23. 1. " BYTE0A ,Channel Status Byte for Subframe A" bitfld.long 0x00 15. " EXTSYNC ,External Sync Enable" "0,1" bitfld.long 0x00 13. " USRPEND ,User Bits Pending" "0,1" newline bitfld.long 0x00 12. " BLKSTART ,Block Start" "0,1" bitfld.long 0x00 11. " VALIDR ,Validity Bit B" "0,1" bitfld.long 0x00 10. " VALIDL ,Validity Bit A" "0,1" bitfld.long 0x00 9. " AUTO ,Automatically Generate Block Start" "0,1" newline bitfld.long 0x00 6.--8. " SMODEIN ,Serial Data Input Format" "0,1,2,3,4,5,6,7" bitfld.long 0x00 5. " SCDFLR ,Select L/R Single-Channel, Double-Frequency Mode" "0,1" bitfld.long 0x00 4. " SCDF ,Single-Channel, Double-Frequency Mode Enable" "0,1" bitfld.long 0x00 2.--3. " FREQ ,Frequency Multiplier" "0,1,2,3" newline bitfld.long 0x00 1. " MUTE ,Mute" "0,1" bitfld.long 0x00 0. " EN ,Transmitter Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SPDIF1_TX_STAT_A0,SPDIF1 Transmit Status A0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE4 ,Byte 4 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE3 ,Byte 3 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE2 ,Byte 2 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE1 ,Byte 1 Sub Frame A" group.long 0x8++0x3 line.long 0x00 "SPDIF1_TX_STAT_B0,SPDIF1 Transmit Status B0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE4 ,Byte 4 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE3 ,Byte 3 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE2 ,Byte 2 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE1 ,Byte 1 Sub Frame B" group.long 0x20++0x3 line.long 0x00 "SPDIF1_RX_CTL,SPDIF1 Receive Control" bitfld.long 0x00 9.--11. " TDMSEL ,Select TDM clock frequency" "0,1,2,3,4,5,6,7" bitfld.long 0x00 4. " RST ,Reset SPDIF Receiver" "0,1" bitfld.long 0x00 3. " RSTRTAUDIO ,Restart Audio" "0,1" bitfld.long 0x00 2. " FASTLOCK ,Fast Lock Select" "0,1" newline bitfld.long 0x00 1. " STRENGTH ,FS strength Control" "0,1" bitfld.long 0x00 0. " EN ,SPDIF Receiver Enable" "0,1" group.long 0x24++0x3 line.long 0x00 "SPDIF1_RX_STAT,SPDIF1 Receive Status Register" hexmask.long.word 0x00 16.--31. 1. " COMPMODE ,Compression Mode" bitfld.long 0x00 12.--15. " WLCHANB ,Word Length Channel B" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " WLCHANA ,Word Length Channel A" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 4. " LOCKLOSS ,Loss of Lock (sticky)" "0,1" newline bitfld.long 0x00 3. " LOCK ,Lock Receiver" "0,1" bitfld.long 0x00 2. " VALID ,Validity Bit" "0,1" bitfld.long 0x00 1. " COMPTYPE ,Compression Type" "0,1" bitfld.long 0x00 0. " AUDIOTYPE ,Audio Type" "0,1" group.long 0x28++0x3 line.long 0x00 "SPDIF1_RX_STAT0_A,SPDIF1 Receive Status A0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,CS Byte 3" hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,CS Byte 2" hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,CS Byte 1" hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,CS Byte 0" group.long 0x2C++0x3 line.long 0x00 "SPDIF1_RX_STAT0_B,SPDIF1 Receive Status B0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,CS Byte 3" hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,CS Byte 2" hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,CS Byte 1" hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,CS Byte 0" group.long 0x30++0x3 line.long 0x00 "SPDIF1_RX_STAT1_A,SPDIF1 Receive Status A1 Register" hexmask.long.byte 0x00 0.--7. 1. " BYTE4 ,CS Byte 4" group.long 0x34++0x3 line.long 0x00 "SPDIF1_RX_STAT1_B,SPDIF1 Receive Status B1 Register" hexmask.long.byte 0x00 0.--7. 1. " BYTE4 ,CS Byte 4" group.long 0xD0++0x3 line.long 0x00 "SPDIF1_TX_STAT_A1,SPDIF1 Transmit Status A1 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE8 ,Byte 8 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE7 ,Byte 7 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE6 ,Byte 6 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE5 ,Byte 5 Sub Frame A" group.long 0xD4++0x3 line.long 0x00 "SPDIF1_TX_STAT_A2,SPDIF1 Transmit Status A2 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE12 ,Byte 12 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE11 ,Byte 11 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE10 ,Byte 10 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE9 ,Byte 9 Sub Frame A" group.long 0xD8++0x3 line.long 0x00 "SPDIF1_TX_STAT_A3,SPDIF1 Transmit Status A3 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE16 ,Byte 16 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE15 ,Byte 15 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE14 ,Byte 14 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE13 ,Byte 13 Sub Frame A" group.long 0xDC++0x3 line.long 0x00 "SPDIF1_TX_STAT_A4,SPDIF1 Transmit Status A4 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE20 ,Byte 20 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE19 ,Byte 19 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE18 ,Byte 18 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE17 ,Byte 17 Sub Frame A" group.long 0xE0++0x3 line.long 0x00 "SPDIF1_TX_STAT_A5,SPDIF1 Transmit Status A5 Register" hexmask.long.byte 0x00 16.--23. 1. " BYTE23 ,Byte 23 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE22 ,Byte 22 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE21 ,Byte 21 Sub Frame A" group.long 0xE8++0x3 line.long 0x00 "SPDIF1_TX_STAT_B1,SPDIF1 Transmit Status B1 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE8 ,Byte 8 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE7 ,Byte 7 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE6 ,Byte 6 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE5 ,Byte 5 Sub Frame B" group.long 0xEC++0x3 line.long 0x00 "SPDIF1_TX_STAT_B2,SPDIF1 Transmit Status B2 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE12 ,Byte 12 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE11 ,Byte 11 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE10 ,Byte 10 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE9 ,Byte 9 Sub Frame B" group.long 0xF0++0x3 line.long 0x00 "SPDIF1_TX_STAT_B3,SPDIF1 Transmit Status B3 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE16 ,Byte 16 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE15 ,Byte 15 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE14 ,Byte 14 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE13 ,Byte 13 Sub Frame B" group.long 0xF4++0x3 line.long 0x00 "SPDIF1_TX_STAT_B4,SPDIF1 Transmit Status B4 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE20 ,Byte 20 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE19 ,Byte 19 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE18 ,Byte 18 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE17 ,Byte 17 Sub Frame B" group.long 0xF8++0x3 line.long 0x00 "SPDIF1_TX_STAT_B5,SPDIF1 Transmit Status B5 Register" hexmask.long.byte 0x00 16.--23. 1. " BYTE23 ,Byte 23 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE22 ,Byte 22 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE21 ,Byte 21 Sub Frame B" group.long 0x100++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_A0,SPDIF1 Transmit User Buffer A0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,Byte 3 of Subframe A User Bit Buffer" hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,Byte 2 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,Byte 1 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,Byte 0 Sub Frame A" group.long 0x104++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_A1,SPDIF1 Transmit User Buffer A1 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE7 ,Byte 7 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE6 ,Byte 6 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE5 ,Byte 5 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE4 ,Byte 4 Sub Frame A" group.long 0x108++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_A2,SPDIF1 Transmit User Buffer A2 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE11 ,Byte 11 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE10 ,Byte 10 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE9 ,Byte 9 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE8 ,Byte 8 Sub Frame A" group.long 0x10C++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_A3,SPDIF1 Transmit User Buffer A3 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE15 ,Byte 15 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE14 ,Byte 14 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE13 ,Byte 13 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE12 ,Byte 12 Sub Frame A" group.long 0x110++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_A4,SPDIF1 Transmit User Buffer A4 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE19 ,Byte 19 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE18 ,Byte 18 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE17 ,Byte 17 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE16 ,Byte 16 Sub Frame A" group.long 0x114++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_A5,SPDIF1 Transmit User Buffer A5 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE23 ,Byte 23 Sub Frame A" hexmask.long.byte 0x00 16.--23. 1. " BYTE22 ,Byte 22 Sub Frame A" hexmask.long.byte 0x00 8.--15. 1. " BYTE21 ,Byte 21 Sub Frame A" hexmask.long.byte 0x00 0.--7. 1. " BYTE20 ,Byte 20 Sub Frame A" group.long 0x120++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_B0,SPDIF1 Transmit User Buffer B0 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE3 ,Byte 3 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE2 ,Byte 2 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE1 ,Byte 1 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE0 ,Byte 0 Sub Frame B" group.long 0x124++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_B1,SPDIF1 Transmit User Buffer B1 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE7 ,Byte 7 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE6 ,Byte 6 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE5 ,Byte 5 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE4 ,Byte 4 Sub Frame B" group.long 0x128++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_B2,SPDIF1 Transmit User Buffer B2 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE11 ,Byte 11 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE10 ,Byte 10 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE9 ,Byte 9 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE8 ,Byte 8 Sub Frame B" group.long 0x12C++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_B3,SPDIF1 Transmit User Buffer B3 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE15 ,Byte 15 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE14 ,Byte 14 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE13 ,Byte 13 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE12 ,Byte 12 Sub Frame B" group.long 0x130++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_B4,SPDIF1 Transmit User Buffer B4 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE19 ,Byte 19 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE18 ,Byte 18 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE17 ,Byte 17 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE16 ,Byte 16 Sub Frame B" group.long 0x134++0x3 line.long 0x00 "SPDIF1_TX_UBUFF_B5,SPDIF1 Transmit User Buffer B5 Register" hexmask.long.byte 0x00 24.--31. 1. " BYTE23 ,Byte 23 Sub Frame B" hexmask.long.byte 0x00 16.--23. 1. " BYTE22 ,Byte 22 Sub Frame B" hexmask.long.byte 0x00 8.--15. 1. " BYTE21 ,Byte 21 Sub Frame B" hexmask.long.byte 0x00 0.--7. 1. " BYTE20 ,Byte 20 Sub Frame B" group.long 0x13C++0x3 line.long 0x00 "SPDIF1_TX_USRUPDT,SPDIF1 User Bit Update Register" bitfld.long 0x00 0. " EN ,Enable" "0,1" tree.end tree.end tree "SPI (Serial Peripheral Interface)" tree "SPI0" base ad:0x31042004 width 15. group.long 0x0++0x3 line.long 0x00 "SPI0_CTL,SPI0 Control Register" bitfld.long 0x00 22. " SOSI ,Start on MOSI (Only on SPI2)" "0,1" bitfld.long 0x00 20.--21. " MIOM ,Multiple I/O Mode (Only on SPI2)" "0,1,2,3" bitfld.long 0x00 18. " FMODE ,Fast-Mode Enable" "0,1" bitfld.long 0x00 16.--17. " FCWM ,Flow Control Watermark" "0,1,2,3" newline bitfld.long 0x00 15. " FCPL ,Flow Control Polarity" "0,1" bitfld.long 0x00 14. " FCCH ,Flow Control Channel Selection" "0,1" bitfld.long 0x00 13. " FCEN ,Flow Control Enable" "0,1" bitfld.long 0x00 12. " LSBF ,Least Significant Bit First" "0,1" newline bitfld.long 0x00 9.--10. " SIZE ,Word Transfer Size" "0,1,2,3" bitfld.long 0x00 8. " EMISO ,Enable MISO" "0,1" bitfld.long 0x00 7. " SELST ,Slave Select Polarity Between Transfers" "0,1" bitfld.long 0x00 6. " ASSEL ,Slave Select Pin Control" "0,1" newline bitfld.long 0x00 5. " CPOL ,Clock Polarity" "0,1" bitfld.long 0x00 4. " CPHA ,Clock Phase" "0,1" bitfld.long 0x00 3. " ODM ,Open Drain Mode" "0,1" bitfld.long 0x00 2. " PSSE ,Protected Slave Select Enable" "0,1" newline bitfld.long 0x00 1. " MSTR ,Master/Slave" "0,1" bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SPI0_RXCTL,SPI0 Receive Control Register" bitfld.long 0x00 16.--18. " RUWM ,Receive FIFO Urgent Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--13. " RRWM ,Receive FIFO Regular Watermark" "0,1,2,3" bitfld.long 0x00 8. " RDO ,Receive Data Overrun" "0,1" bitfld.long 0x00 4.--6. " RDR ,Receive Data Request" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 3. " RWCEN ,Receive Word Counter Enable" "0,1" bitfld.long 0x00 2. " RTI ,Receive Transfer Initiate" "0,1" bitfld.long 0x00 0. " REN ,Receive Enable" "0,1" group.long 0x8++0x3 line.long 0x00 "SPI0_TXCTL,SPI0 Transmit Control Register" bitfld.long 0x00 16.--18. " TUWM ,FIFO Urgent Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--13. " TRWM ,FIFO Regular Watermark" "0,1,2,3" bitfld.long 0x00 8. " TDU ,Transmit Data Underrun" "0,1" bitfld.long 0x00 4.--6. " TDR ,Transmit Data Request" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 3. " TWCEN ,Transmit Word Counter Enable" "0,1" bitfld.long 0x00 2. " TTI ,Transmit Transfer Initiate" "0,1" bitfld.long 0x00 0. " TEN ,Transmit Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPI0_CLK,SPI0 Clock Rate Register" hexmask.long.word 0x00 0.--15. 1. " BAUD ,Baud Rate" group.long 0x10++0x3 line.long 0x00 "SPI0_DLY,SPI0 Delay Register" bitfld.long 0x00 9. " LAGX ,Extended SPI Clock Lag Control" "0,1" bitfld.long 0x00 8. " LEADX ,Extended SPI Clock Lead Control" "0,1" hexmask.long.byte 0x00 0.--7. 1. " STOP ,Transfer Delay Time in Multiples of SPI Clock Period" group.long 0x14++0x3 line.long 0x00 "SPI0_SLVSEL,SPI0 Slave Select Register" bitfld.long 0x00 15. " SSEL7 ,Slave Select 7 Output" "0,1" bitfld.long 0x00 14. " SSEL6 ,Slave Select 6 Output" "0,1" bitfld.long 0x00 13. " SSEL5 ,Slave Select 5 Output" "0,1" bitfld.long 0x00 12. " SSEL4 ,Slave Select 4 Output" "0,1" newline bitfld.long 0x00 11. " SSEL3 ,Slave Select 3 Output" "0,1" bitfld.long 0x00 10. " SSEL2 ,Slave Select 2 Output" "0,1" bitfld.long 0x00 9. " SSEL1 ,Slave Select 1 Output" "0,1" bitfld.long 0x00 7. " SSE7 ,Slave Select 7 Enable" "0,1" newline bitfld.long 0x00 6. " SSE6 ,Slave Select 6 Enable" "0,1" bitfld.long 0x00 5. " SSE5 ,Slave Select 5 Enable" "0,1" bitfld.long 0x00 4. " SSE4 ,Slave Select 4 Enable" "0,1" bitfld.long 0x00 3. " SSE3 ,Slave Select 3 Enable" "0,1" newline bitfld.long 0x00 2. " SSE2 ,Slave Select 2 Enable" "0,1" bitfld.long 0x00 1. " SSE1 ,Slave Select 1 Enable" "0,1" group.long 0x18++0x3 line.long 0x00 "SPI0_RWC,SPI0 Received Word Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Received Word Count" group.long 0x1C++0x3 line.long 0x00 "SPI0_RWCR,SPI0 Received Word Count Reload Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Received Word Count Reload" group.long 0x20++0x3 line.long 0x00 "SPI0_TWC,SPI0 Transmitted Word Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Transmitted Word Count" group.long 0x24++0x3 line.long 0x00 "SPI0_TWCR,SPI0 Transmitted Word Count Reload Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Transmitted Word Count Reload" group.long 0x2C++0x3 line.long 0x00 "SPI0_IMSK,SPI0 Interrupt Mask Register" bitfld.long 0x00 11. " TF ,Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark" "0,1" group.long 0x30++0x3 line.long 0x00 "SPI0_IMSK_CLR,SPI0 Interrupt Mask Clear Register" bitfld.long 0x00 11. " TF ,Clear Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Clear Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Clear Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Clear Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Clear Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Clear Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Clear Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Clear Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Clear Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Clear Receive Urgent Watermark" "0,1" group.long 0x34++0x3 line.long 0x00 "SPI0_IMSK_SET,SPI0 Interrupt Mask Set Register" bitfld.long 0x00 11. " TF ,Set Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Set Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Set Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Set Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Set Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Set Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Set Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Set Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Set Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Set Receive Urgent Watermark" "0,1" group.long 0x3C++0x3 line.long 0x00 "SPI0_STAT,SPI0 Status Register" bitfld.long 0x00 23. " TFF ,SPI_TFIFO Full" "0,1" bitfld.long 0x00 22. " RFE ,SPI_RFIFO Empty" "0,1" bitfld.long 0x00 20. " FCS ,Flow Control Stall Indication" "0,1" bitfld.long 0x00 16.--18. " TFS ,SPI_TFIFO Status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. " RFS ,SPI_RFIFO Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 11. " TF ,Transmit Finish Indication" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish Indication" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start" "0,1" newline bitfld.long 0x00 8. " RS ,Receive Start" "0,1" bitfld.long 0x00 7. " MF ,Mode Fault Indication" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision Indication" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun Indication" "0,1" newline bitfld.long 0x00 4. " ROR ,Receive Overrun Indication" "0,1" bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark Breached" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark Breached" "0,1" bitfld.long 0x00 0. " SPIF ,SPI Finished" "0,1" group.long 0x40++0x3 line.long 0x00 "SPI0_ILAT,SPI0 Masked Interrupt Condition Register" bitfld.long 0x00 11. " TF ,Transmit Finish Interrupt Latch" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish Interrupt Latch" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start Interrupt Latch" "0,1" bitfld.long 0x00 8. " RS ,Receive Start Interrupt Latch" "0,1" newline bitfld.long 0x00 7. " MF ,Mode Fault Interrupt Latch" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision Interrupt Latch" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun Interrupt Latch" "0,1" bitfld.long 0x00 4. " ROR ,Receive Overrun Interrupt Latch" "0,1" newline bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark Interrupt Latch" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark Interrupt Latch" "0,1" group.long 0x44++0x3 line.long 0x00 "SPI0_ILAT_CLR,SPI0 Masked Interrupt Clear Register" bitfld.long 0x00 11. " TF ,Clear Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Clear Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Clear Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Clear Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Clear Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Clear Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Clear Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Clear Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Clear Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Clear Receive Urgent Watermark" "0,1" group.long 0x4C++0x3 line.long 0x00 "SPI0_RFIFO,SPI0 Receive FIFO Data Register" group.long 0x54++0x3 line.long 0x00 "SPI0_TFIFO,SPI0 Transmit FIFO Data Register" tree.end tree "SPI1" base ad:0x31043004 width 15. group.long 0x0++0x3 line.long 0x00 "SPI1_CTL,SPI1 Control Register" bitfld.long 0x00 22. " SOSI ,Start on MOSI (Only on SPI2)" "0,1" bitfld.long 0x00 20.--21. " MIOM ,Multiple I/O Mode (Only on SPI2)" "0,1,2,3" bitfld.long 0x00 18. " FMODE ,Fast-Mode Enable" "0,1" bitfld.long 0x00 16.--17. " FCWM ,Flow Control Watermark" "0,1,2,3" newline bitfld.long 0x00 15. " FCPL ,Flow Control Polarity" "0,1" bitfld.long 0x00 14. " FCCH ,Flow Control Channel Selection" "0,1" bitfld.long 0x00 13. " FCEN ,Flow Control Enable" "0,1" bitfld.long 0x00 12. " LSBF ,Least Significant Bit First" "0,1" newline bitfld.long 0x00 9.--10. " SIZE ,Word Transfer Size" "0,1,2,3" bitfld.long 0x00 8. " EMISO ,Enable MISO" "0,1" bitfld.long 0x00 7. " SELST ,Slave Select Polarity Between Transfers" "0,1" bitfld.long 0x00 6. " ASSEL ,Slave Select Pin Control" "0,1" newline bitfld.long 0x00 5. " CPOL ,Clock Polarity" "0,1" bitfld.long 0x00 4. " CPHA ,Clock Phase" "0,1" bitfld.long 0x00 3. " ODM ,Open Drain Mode" "0,1" bitfld.long 0x00 2. " PSSE ,Protected Slave Select Enable" "0,1" newline bitfld.long 0x00 1. " MSTR ,Master/Slave" "0,1" bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SPI1_RXCTL,SPI1 Receive Control Register" bitfld.long 0x00 16.--18. " RUWM ,Receive FIFO Urgent Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--13. " RRWM ,Receive FIFO Regular Watermark" "0,1,2,3" bitfld.long 0x00 8. " RDO ,Receive Data Overrun" "0,1" bitfld.long 0x00 4.--6. " RDR ,Receive Data Request" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 3. " RWCEN ,Receive Word Counter Enable" "0,1" bitfld.long 0x00 2. " RTI ,Receive Transfer Initiate" "0,1" bitfld.long 0x00 0. " REN ,Receive Enable" "0,1" group.long 0x8++0x3 line.long 0x00 "SPI1_TXCTL,SPI1 Transmit Control Register" bitfld.long 0x00 16.--18. " TUWM ,FIFO Urgent Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--13. " TRWM ,FIFO Regular Watermark" "0,1,2,3" bitfld.long 0x00 8. " TDU ,Transmit Data Underrun" "0,1" bitfld.long 0x00 4.--6. " TDR ,Transmit Data Request" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 3. " TWCEN ,Transmit Word Counter Enable" "0,1" bitfld.long 0x00 2. " TTI ,Transmit Transfer Initiate" "0,1" bitfld.long 0x00 0. " TEN ,Transmit Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPI1_CLK,SPI1 Clock Rate Register" hexmask.long.word 0x00 0.--15. 1. " BAUD ,Baud Rate" group.long 0x10++0x3 line.long 0x00 "SPI1_DLY,SPI1 Delay Register" bitfld.long 0x00 9. " LAGX ,Extended SPI Clock Lag Control" "0,1" bitfld.long 0x00 8. " LEADX ,Extended SPI Clock Lead Control" "0,1" hexmask.long.byte 0x00 0.--7. 1. " STOP ,Transfer Delay Time in Multiples of SPI Clock Period" group.long 0x14++0x3 line.long 0x00 "SPI1_SLVSEL,SPI1 Slave Select Register" bitfld.long 0x00 15. " SSEL7 ,Slave Select 7 Output" "0,1" bitfld.long 0x00 14. " SSEL6 ,Slave Select 6 Output" "0,1" bitfld.long 0x00 13. " SSEL5 ,Slave Select 5 Output" "0,1" bitfld.long 0x00 12. " SSEL4 ,Slave Select 4 Output" "0,1" newline bitfld.long 0x00 11. " SSEL3 ,Slave Select 3 Output" "0,1" bitfld.long 0x00 10. " SSEL2 ,Slave Select 2 Output" "0,1" bitfld.long 0x00 9. " SSEL1 ,Slave Select 1 Output" "0,1" bitfld.long 0x00 7. " SSE7 ,Slave Select 7 Enable" "0,1" newline bitfld.long 0x00 6. " SSE6 ,Slave Select 6 Enable" "0,1" bitfld.long 0x00 5. " SSE5 ,Slave Select 5 Enable" "0,1" bitfld.long 0x00 4. " SSE4 ,Slave Select 4 Enable" "0,1" bitfld.long 0x00 3. " SSE3 ,Slave Select 3 Enable" "0,1" newline bitfld.long 0x00 2. " SSE2 ,Slave Select 2 Enable" "0,1" bitfld.long 0x00 1. " SSE1 ,Slave Select 1 Enable" "0,1" group.long 0x18++0x3 line.long 0x00 "SPI1_RWC,SPI1 Received Word Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Received Word Count" group.long 0x1C++0x3 line.long 0x00 "SPI1_RWCR,SPI1 Received Word Count Reload Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Received Word Count Reload" group.long 0x20++0x3 line.long 0x00 "SPI1_TWC,SPI1 Transmitted Word Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Transmitted Word Count" group.long 0x24++0x3 line.long 0x00 "SPI1_TWCR,SPI1 Transmitted Word Count Reload Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Transmitted Word Count Reload" group.long 0x2C++0x3 line.long 0x00 "SPI1_IMSK,SPI1 Interrupt Mask Register" bitfld.long 0x00 11. " TF ,Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark" "0,1" group.long 0x30++0x3 line.long 0x00 "SPI1_IMSK_CLR,SPI1 Interrupt Mask Clear Register" bitfld.long 0x00 11. " TF ,Clear Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Clear Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Clear Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Clear Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Clear Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Clear Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Clear Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Clear Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Clear Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Clear Receive Urgent Watermark" "0,1" group.long 0x34++0x3 line.long 0x00 "SPI1_IMSK_SET,SPI1 Interrupt Mask Set Register" bitfld.long 0x00 11. " TF ,Set Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Set Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Set Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Set Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Set Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Set Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Set Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Set Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Set Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Set Receive Urgent Watermark" "0,1" group.long 0x3C++0x3 line.long 0x00 "SPI1_STAT,SPI1 Status Register" bitfld.long 0x00 23. " TFF ,SPI_TFIFO Full" "0,1" bitfld.long 0x00 22. " RFE ,SPI_RFIFO Empty" "0,1" bitfld.long 0x00 20. " FCS ,Flow Control Stall Indication" "0,1" bitfld.long 0x00 16.--18. " TFS ,SPI_TFIFO Status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 12.--14. " RFS ,SPI_RFIFO Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 11. " TF ,Transmit Finish Indication" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish Indication" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start" "0,1" newline bitfld.long 0x00 8. " RS ,Receive Start" "0,1" bitfld.long 0x00 7. " MF ,Mode Fault Indication" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision Indication" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun Indication" "0,1" newline bitfld.long 0x00 4. " ROR ,Receive Overrun Indication" "0,1" bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark Breached" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark Breached" "0,1" bitfld.long 0x00 0. " SPIF ,SPI Finished" "0,1" group.long 0x40++0x3 line.long 0x00 "SPI1_ILAT,SPI1 Masked Interrupt Condition Register" bitfld.long 0x00 11. " TF ,Transmit Finish Interrupt Latch" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish Interrupt Latch" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start Interrupt Latch" "0,1" bitfld.long 0x00 8. " RS ,Receive Start Interrupt Latch" "0,1" newline bitfld.long 0x00 7. " MF ,Mode Fault Interrupt Latch" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision Interrupt Latch" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun Interrupt Latch" "0,1" bitfld.long 0x00 4. " ROR ,Receive Overrun Interrupt Latch" "0,1" newline bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark Interrupt Latch" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark Interrupt Latch" "0,1" group.long 0x44++0x3 line.long 0x00 "SPI1_ILAT_CLR,SPI1 Masked Interrupt Clear Register" bitfld.long 0x00 11. " TF ,Clear Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Clear Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Clear Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Clear Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Clear Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Clear Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Clear Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Clear Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Clear Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Clear Receive Urgent Watermark" "0,1" group.long 0x4C++0x3 line.long 0x00 "SPI1_RFIFO,SPI1 Receive FIFO Data Register" group.long 0x54++0x3 line.long 0x00 "SPI1_TFIFO,SPI1 Transmit FIFO Data Register" tree.end tree "SPI2" base ad:0x31044004 width 15. group.long 0x0++0x3 line.long 0x00 "SPI2_CTL,SPI2 Control Register" bitfld.long 0x00 31. " MMSE ,Memory-Mapped SPI Enable (Only on SPI2)" "0,1" bitfld.long 0x00 30. " MMWEM ,Memory Mapped Write Error Mask (Only on SPI2)" "0,1" bitfld.long 0x00 22. " SOSI ,Start on MOSI (Only on SPI2)" "0,1" bitfld.long 0x00 20.--21. " MIOM ,Multiple I/O Mode (Only on SPI2)" "0,1,2,3" newline bitfld.long 0x00 18. " FMODE ,Fast-Mode Enable" "0,1" bitfld.long 0x00 16.--17. " FCWM ,Flow Control Watermark" "0,1,2,3" bitfld.long 0x00 15. " FCPL ,Flow Control Polarity" "0,1" bitfld.long 0x00 14. " FCCH ,Flow Control Channel Selection" "0,1" newline bitfld.long 0x00 13. " FCEN ,Flow Control Enable" "0,1" bitfld.long 0x00 12. " LSBF ,Least Significant Bit First" "0,1" bitfld.long 0x00 9.--10. " SIZE ,Word Transfer Size" "0,1,2,3" bitfld.long 0x00 8. " EMISO ,Enable MISO" "0,1" newline bitfld.long 0x00 7. " SELST ,Slave Select Polarity Between Transfers" "0,1" bitfld.long 0x00 6. " ASSEL ,Slave Select Pin Control" "0,1" bitfld.long 0x00 5. " CPOL ,Clock Polarity" "0,1" bitfld.long 0x00 4. " CPHA ,Clock Phase" "0,1" newline bitfld.long 0x00 3. " ODM ,Open Drain Mode" "0,1" bitfld.long 0x00 2. " PSSE ,Protected Slave Select Enable" "0,1" bitfld.long 0x00 1. " MSTR ,Master/Slave" "0,1" bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SPI2_RXCTL,SPI2 Receive Control Register" bitfld.long 0x00 16.--18. " RUWM ,Receive FIFO Urgent Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--13. " RRWM ,Receive FIFO Regular Watermark" "0,1,2,3" bitfld.long 0x00 8. " RDO ,Receive Data Overrun" "0,1" bitfld.long 0x00 4.--6. " RDR ,Receive Data Request" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 3. " RWCEN ,Receive Word Counter Enable" "0,1" bitfld.long 0x00 2. " RTI ,Receive Transfer Initiate" "0,1" bitfld.long 0x00 0. " REN ,Receive Enable" "0,1" group.long 0x8++0x3 line.long 0x00 "SPI2_TXCTL,SPI2 Transmit Control Register" bitfld.long 0x00 16.--18. " TUWM ,FIFO Urgent Watermark" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--13. " TRWM ,FIFO Regular Watermark" "0,1,2,3" bitfld.long 0x00 8. " TDU ,Transmit Data Underrun" "0,1" bitfld.long 0x00 4.--6. " TDR ,Transmit Data Request" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 3. " TWCEN ,Transmit Word Counter Enable" "0,1" bitfld.long 0x00 2. " TTI ,Transmit Transfer Initiate" "0,1" bitfld.long 0x00 0. " TEN ,Transmit Enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPI2_CLK,SPI2 Clock Rate Register" hexmask.long.word 0x00 0.--15. 1. " BAUD ,Baud Rate" group.long 0x10++0x3 line.long 0x00 "SPI2_DLY,SPI2 Delay Register" bitfld.long 0x00 9. " LAGX ,Extended SPI Clock Lag Control" "0,1" bitfld.long 0x00 8. " LEADX ,Extended SPI Clock Lead Control" "0,1" hexmask.long.byte 0x00 0.--7. 1. " STOP ,Transfer Delay Time in Multiples of SPI Clock Period" group.long 0x14++0x3 line.long 0x00 "SPI2_SLVSEL,SPI2 Slave Select Register" bitfld.long 0x00 15. " SSEL7 ,Slave Select 7 Output" "0,1" bitfld.long 0x00 14. " SSEL6 ,Slave Select 6 Output" "0,1" bitfld.long 0x00 13. " SSEL5 ,Slave Select 5 Output" "0,1" bitfld.long 0x00 12. " SSEL4 ,Slave Select 4 Output" "0,1" newline bitfld.long 0x00 11. " SSEL3 ,Slave Select 3 Output" "0,1" bitfld.long 0x00 10. " SSEL2 ,Slave Select 2 Output" "0,1" bitfld.long 0x00 9. " SSEL1 ,Slave Select 1 Output" "0,1" bitfld.long 0x00 7. " SSE7 ,Slave Select 7 Enable" "0,1" newline bitfld.long 0x00 6. " SSE6 ,Slave Select 6 Enable" "0,1" bitfld.long 0x00 5. " SSE5 ,Slave Select 5 Enable" "0,1" bitfld.long 0x00 4. " SSE4 ,Slave Select 4 Enable" "0,1" bitfld.long 0x00 3. " SSE3 ,Slave Select 3 Enable" "0,1" newline bitfld.long 0x00 2. " SSE2 ,Slave Select 2 Enable" "0,1" bitfld.long 0x00 1. " SSE1 ,Slave Select 1 Enable" "0,1" group.long 0x18++0x3 line.long 0x00 "SPI2_RWC,SPI2 Received Word Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Received Word Count" group.long 0x1C++0x3 line.long 0x00 "SPI2_RWCR,SPI2 Received Word Count Reload Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Received Word Count Reload" group.long 0x20++0x3 line.long 0x00 "SPI2_TWC,SPI2 Transmitted Word Count Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Transmitted Word Count" group.long 0x24++0x3 line.long 0x00 "SPI2_TWCR,SPI2 Transmitted Word Count Reload Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Transmitted Word Count Reload" group.long 0x2C++0x3 line.long 0x00 "SPI2_IMSK,SPI2 Interrupt Mask Register" bitfld.long 0x00 11. " TF ,Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark" "0,1" group.long 0x30++0x3 line.long 0x00 "SPI2_IMSK_CLR,SPI2 Interrupt Mask Clear Register" bitfld.long 0x00 11. " TF ,Clear Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Clear Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Clear Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Clear Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Clear Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Clear Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Clear Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Clear Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Clear Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Clear Receive Urgent Watermark" "0,1" group.long 0x34++0x3 line.long 0x00 "SPI2_IMSK_SET,SPI2 Interrupt Mask Set Register" bitfld.long 0x00 11. " TF ,Set Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Set Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Set Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Set Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Set Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Set Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Set Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Set Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Set Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Set Receive Urgent Watermark" "0,1" group.long 0x3C++0x3 line.long 0x00 "SPI2_STAT,SPI2 Status Register" bitfld.long 0x00 31. " MMAE ,Memory Mapped Access Error" "0,1" bitfld.long 0x00 29. " MMRE ,Memory Mapped Read Error" "0,1" bitfld.long 0x00 28. " MMWE ,Memory Mapped Write Error" "0,1" bitfld.long 0x00 23. " TFF ,SPI_TFIFO Full" "0,1" newline bitfld.long 0x00 22. " RFE ,SPI_RFIFO Empty" "0,1" bitfld.long 0x00 20. " FCS ,Flow Control Stall Indication" "0,1" bitfld.long 0x00 16.--18. " TFS ,SPI_TFIFO Status" "0,1,2,3,4,5,6,7" bitfld.long 0x00 12.--14. " RFS ,SPI_RFIFO Status" "0,1,2,3,4,5,6,7" newline bitfld.long 0x00 11. " TF ,Transmit Finish Indication" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish Indication" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Mode Fault Indication" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision Indication" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun Indication" "0,1" bitfld.long 0x00 4. " ROR ,Receive Overrun Indication" "0,1" newline bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark Breached" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark Breached" "0,1" bitfld.long 0x00 0. " SPIF ,SPI Finished" "0,1" group.long 0x40++0x3 line.long 0x00 "SPI2_ILAT,SPI2 Masked Interrupt Condition Register" bitfld.long 0x00 11. " TF ,Transmit Finish Interrupt Latch" "0,1" bitfld.long 0x00 10. " RF ,Receive Finish Interrupt Latch" "0,1" bitfld.long 0x00 9. " TS ,Transmit Start Interrupt Latch" "0,1" bitfld.long 0x00 8. " RS ,Receive Start Interrupt Latch" "0,1" newline bitfld.long 0x00 7. " MF ,Mode Fault Interrupt Latch" "0,1" bitfld.long 0x00 6. " TC ,Transmit Collision Interrupt Latch" "0,1" bitfld.long 0x00 5. " TUR ,Transmit Underrun Interrupt Latch" "0,1" bitfld.long 0x00 4. " ROR ,Receive Overrun Interrupt Latch" "0,1" newline bitfld.long 0x00 2. " TUWM ,Transmit Urgent Watermark Interrupt Latch" "0,1" bitfld.long 0x00 1. " RUWM ,Receive Urgent Watermark Interrupt Latch" "0,1" group.long 0x44++0x3 line.long 0x00 "SPI2_ILAT_CLR,SPI2 Masked Interrupt Clear Register" bitfld.long 0x00 11. " TF ,Clear Transmit Finish" "0,1" bitfld.long 0x00 10. " RF ,Clear Receive Finish" "0,1" bitfld.long 0x00 9. " TS ,Clear Transmit Start" "0,1" bitfld.long 0x00 8. " RS ,Clear Receive Start" "0,1" newline bitfld.long 0x00 7. " MF ,Clear Mode Fault" "0,1" bitfld.long 0x00 6. " TC ,Clear Transmit Collision" "0,1" bitfld.long 0x00 5. " TUR ,Clear Transmit Underrun" "0,1" bitfld.long 0x00 4. " ROR ,Clear Receive Overrun" "0,1" newline bitfld.long 0x00 2. " TUWM ,Clear Transmit Urgent Watermark" "0,1" bitfld.long 0x00 1. " RUWM ,Clear Receive Urgent Watermark" "0,1" group.long 0x4C++0x3 line.long 0x00 "SPI2_RFIFO,SPI2 Receive FIFO Data Register" group.long 0x54++0x3 line.long 0x00 "SPI2_TFIFO,SPI2 Transmit FIFO Data Register" group.long 0x5C++0x3 line.long 0x00 "SPI2_MMRDH,SPI2 Memory Mapped Read Header (Only on SPI2)" bitfld.long 0x00 29. " CMDPINS ,Pins Used for Command" "0,1" bitfld.long 0x00 28. " CMDSKIP ,Command Skip Enable" "0,1" bitfld.long 0x00 27. " WRAP ,SPI Memory Wrap Indicator" "0,1" bitfld.long 0x00 26. " MERGE ,Merge Enable" "0,1" newline bitfld.long 0x00 24.--25. " TRIDMY ,Tristate Dummy Timing" "0,1,2,3" hexmask.long.byte 0x00 16.--23. 1. " MODE ,Mode Field" bitfld.long 0x00 12.--14. " DMYSIZE ,Bytes of Dummy/Mode" "0,1,2,3,4,5,6,7" bitfld.long 0x00 11. " ADRPINS ,Pins Used for Address" "0,1" newline bitfld.long 0x00 8.--10. " ADRSIZE ,Bytes of Read Address" "0,1,2,3,4,5,6,7" hexmask.long.byte 0x00 0.--7. 1. " OPCODE ,Read Opcode" group.long 0x60++0x3 line.long 0x00 "SPI2_MMTOP,SPI2 SPI Memory Top Address (Only on SPI2)" tree.end tree.end tree "SPORT (Serial Ports)" tree "SPORT0" base ad:0x31002000 width 16. group.long 0x0++0x3 line.long 0x00 "SPORT0_CTL_A,SPORT0 Half SPORT 'A' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x4++0x3 line.long 0x00 "SPORT0_DIV_A,SPORT0 Half SPORT 'A' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "SPORT0_MCTL_A,SPORT0 Half SPORT 'A' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPORT0_CS0_A,SPORT0 Half SPORT 'A' Multichannel 0-31 Select Register" group.long 0x10++0x3 line.long 0x00 "SPORT0_CS1_A,SPORT0 Half SPORT 'A' Multichannel 32-63 Select Register" group.long 0x14++0x3 line.long 0x00 "SPORT0_CS2_A,SPORT0 Half SPORT 'A' Multichannel 64-95 Select Register" group.long 0x18++0x3 line.long 0x00 "SPORT0_CS3_A,SPORT0 Half SPORT 'A' Multichannel 96-127 Select Register" group.long 0x20++0x3 line.long 0x00 "SPORT0_ERR_A,SPORT0 Half SPORT 'A' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0x24++0x3 line.long 0x00 "SPORT0_MSTAT_A,SPORT0 Half SPORT 'A' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0x28++0x3 line.long 0x00 "SPORT0_CTL2_A,SPORT0 Half SPORT 'A' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0x40++0x3 line.long 0x00 "SPORT0_TXPRI_A,SPORT0 Half SPORT 'A' Tx Buffer (Primary) Register" group.long 0x44++0x3 line.long 0x00 "SPORT0_RXPRI_A,SPORT0 Half SPORT 'A' Rx Buffer (Primary) Register" group.long 0x48++0x3 line.long 0x00 "SPORT0_TXSEC_A,SPORT0 Half SPORT 'A' Tx Buffer (Secondary) Register" group.long 0x4C++0x3 line.long 0x00 "SPORT0_RXSEC_A,SPORT0 Half SPORT 'A' Rx Buffer (Secondary) Register" group.long 0x80++0x3 line.long 0x00 "SPORT0_CTL_B,SPORT0 Half SPORT 'B' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation Mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x84++0x3 line.long 0x00 "SPORT0_DIV_B,SPORT0 Half SPORT 'B' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x88++0x3 line.long 0x00 "SPORT0_MCTL_B,SPORT0 Half SPORT 'B' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel Enable" "0,1" group.long 0x8C++0x3 line.long 0x00 "SPORT0_CS0_B,SPORT0 Half SPORT 'B' Multichannel 0-31 Select Register" group.long 0x90++0x3 line.long 0x00 "SPORT0_CS1_B,SPORT0 Half SPORT 'B' Multichannel 32-63 Select Register" group.long 0x94++0x3 line.long 0x00 "SPORT0_CS2_B,SPORT0 Half SPORT 'B' Multichannel 64-95 Select Register" group.long 0x98++0x3 line.long 0x00 "SPORT0_CS3_B,SPORT0 Half SPORT 'B' Multichannel 96-127 Select Register" group.long 0xA0++0x3 line.long 0x00 "SPORT0_ERR_B,SPORT0 Half SPORT 'B' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0xA4++0x3 line.long 0x00 "SPORT0_MSTAT_B,SPORT0 Half SPORT 'B' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0xA8++0x3 line.long 0x00 "SPORT0_CTL2_B,SPORT0 Half SPORT 'B' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0xC0++0x3 line.long 0x00 "SPORT0_TXPRI_B,SPORT0 Half SPORT 'B' Tx Buffer (Primary) Register" group.long 0xC4++0x3 line.long 0x00 "SPORT0_RXPRI_B,SPORT0 Half SPORT 'B' Rx Buffer (Primary) Register" group.long 0xC8++0x3 line.long 0x00 "SPORT0_TXSEC_B,SPORT0 Half SPORT 'B' Tx Buffer (Secondary) Register" group.long 0xCC++0x3 line.long 0x00 "SPORT0_RXSEC_B,SPORT0 Half SPORT 'B' Rx Buffer (Secondary) Register" tree.end tree "SPORT1" base ad:0x31002100 width 16. group.long 0x0++0x3 line.long 0x00 "SPORT1_CTL_A,SPORT1 Half SPORT 'A' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x4++0x3 line.long 0x00 "SPORT1_DIV_A,SPORT1 Half SPORT 'A' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "SPORT1_MCTL_A,SPORT1 Half SPORT 'A' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPORT1_CS0_A,SPORT1 Half SPORT 'A' Multichannel 0-31 Select Register" group.long 0x10++0x3 line.long 0x00 "SPORT1_CS1_A,SPORT1 Half SPORT 'A' Multichannel 32-63 Select Register" group.long 0x14++0x3 line.long 0x00 "SPORT1_CS2_A,SPORT1 Half SPORT 'A' Multichannel 64-95 Select Register" group.long 0x18++0x3 line.long 0x00 "SPORT1_CS3_A,SPORT1 Half SPORT 'A' Multichannel 96-127 Select Register" group.long 0x20++0x3 line.long 0x00 "SPORT1_ERR_A,SPORT1 Half SPORT 'A' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0x24++0x3 line.long 0x00 "SPORT1_MSTAT_A,SPORT1 Half SPORT 'A' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0x28++0x3 line.long 0x00 "SPORT1_CTL2_A,SPORT1 Half SPORT 'A' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0x40++0x3 line.long 0x00 "SPORT1_TXPRI_A,SPORT1 Half SPORT 'A' Tx Buffer (Primary) Register" group.long 0x44++0x3 line.long 0x00 "SPORT1_RXPRI_A,SPORT1 Half SPORT 'A' Rx Buffer (Primary) Register" group.long 0x48++0x3 line.long 0x00 "SPORT1_TXSEC_A,SPORT1 Half SPORT 'A' Tx Buffer (Secondary) Register" group.long 0x4C++0x3 line.long 0x00 "SPORT1_RXSEC_A,SPORT1 Half SPORT 'A' Rx Buffer (Secondary) Register" group.long 0x80++0x3 line.long 0x00 "SPORT1_CTL_B,SPORT1 Half SPORT 'B' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation Mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x84++0x3 line.long 0x00 "SPORT1_DIV_B,SPORT1 Half SPORT 'B' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x88++0x3 line.long 0x00 "SPORT1_MCTL_B,SPORT1 Half SPORT 'B' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel Enable" "0,1" group.long 0x8C++0x3 line.long 0x00 "SPORT1_CS0_B,SPORT1 Half SPORT 'B' Multichannel 0-31 Select Register" group.long 0x90++0x3 line.long 0x00 "SPORT1_CS1_B,SPORT1 Half SPORT 'B' Multichannel 32-63 Select Register" group.long 0x94++0x3 line.long 0x00 "SPORT1_CS2_B,SPORT1 Half SPORT 'B' Multichannel 64-95 Select Register" group.long 0x98++0x3 line.long 0x00 "SPORT1_CS3_B,SPORT1 Half SPORT 'B' Multichannel 96-127 Select Register" group.long 0xA0++0x3 line.long 0x00 "SPORT1_ERR_B,SPORT1 Half SPORT 'B' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0xA4++0x3 line.long 0x00 "SPORT1_MSTAT_B,SPORT1 Half SPORT 'B' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0xA8++0x3 line.long 0x00 "SPORT1_CTL2_B,SPORT1 Half SPORT 'B' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0xC0++0x3 line.long 0x00 "SPORT1_TXPRI_B,SPORT1 Half SPORT 'B' Tx Buffer (Primary) Register" group.long 0xC4++0x3 line.long 0x00 "SPORT1_RXPRI_B,SPORT1 Half SPORT 'B' Rx Buffer (Primary) Register" group.long 0xC8++0x3 line.long 0x00 "SPORT1_TXSEC_B,SPORT1 Half SPORT 'B' Tx Buffer (Secondary) Register" group.long 0xCC++0x3 line.long 0x00 "SPORT1_RXSEC_B,SPORT1 Half SPORT 'B' Rx Buffer (Secondary) Register" tree.end tree "SPORT2" base ad:0x31002200 width 16. group.long 0x0++0x3 line.long 0x00 "SPORT2_CTL_A,SPORT2 Half SPORT 'A' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x4++0x3 line.long 0x00 "SPORT2_DIV_A,SPORT2 Half SPORT 'A' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "SPORT2_MCTL_A,SPORT2 Half SPORT 'A' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPORT2_CS0_A,SPORT2 Half SPORT 'A' Multichannel 0-31 Select Register" group.long 0x10++0x3 line.long 0x00 "SPORT2_CS1_A,SPORT2 Half SPORT 'A' Multichannel 32-63 Select Register" group.long 0x14++0x3 line.long 0x00 "SPORT2_CS2_A,SPORT2 Half SPORT 'A' Multichannel 64-95 Select Register" group.long 0x18++0x3 line.long 0x00 "SPORT2_CS3_A,SPORT2 Half SPORT 'A' Multichannel 96-127 Select Register" group.long 0x20++0x3 line.long 0x00 "SPORT2_ERR_A,SPORT2 Half SPORT 'A' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0x24++0x3 line.long 0x00 "SPORT2_MSTAT_A,SPORT2 Half SPORT 'A' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0x28++0x3 line.long 0x00 "SPORT2_CTL2_A,SPORT2 Half SPORT 'A' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0x40++0x3 line.long 0x00 "SPORT2_TXPRI_A,SPORT2 Half SPORT 'A' Tx Buffer (Primary) Register" group.long 0x44++0x3 line.long 0x00 "SPORT2_RXPRI_A,SPORT2 Half SPORT 'A' Rx Buffer (Primary) Register" group.long 0x48++0x3 line.long 0x00 "SPORT2_TXSEC_A,SPORT2 Half SPORT 'A' Tx Buffer (Secondary) Register" group.long 0x4C++0x3 line.long 0x00 "SPORT2_RXSEC_A,SPORT2 Half SPORT 'A' Rx Buffer (Secondary) Register" group.long 0x80++0x3 line.long 0x00 "SPORT2_CTL_B,SPORT2 Half SPORT 'B' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation Mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x84++0x3 line.long 0x00 "SPORT2_DIV_B,SPORT2 Half SPORT 'B' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x88++0x3 line.long 0x00 "SPORT2_MCTL_B,SPORT2 Half SPORT 'B' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel Enable" "0,1" group.long 0x8C++0x3 line.long 0x00 "SPORT2_CS0_B,SPORT2 Half SPORT 'B' Multichannel 0-31 Select Register" group.long 0x90++0x3 line.long 0x00 "SPORT2_CS1_B,SPORT2 Half SPORT 'B' Multichannel 32-63 Select Register" group.long 0x94++0x3 line.long 0x00 "SPORT2_CS2_B,SPORT2 Half SPORT 'B' Multichannel 64-95 Select Register" group.long 0x98++0x3 line.long 0x00 "SPORT2_CS3_B,SPORT2 Half SPORT 'B' Multichannel 96-127 Select Register" group.long 0xA0++0x3 line.long 0x00 "SPORT2_ERR_B,SPORT2 Half SPORT 'B' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0xA4++0x3 line.long 0x00 "SPORT2_MSTAT_B,SPORT2 Half SPORT 'B' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0xA8++0x3 line.long 0x00 "SPORT2_CTL2_B,SPORT2 Half SPORT 'B' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0xC0++0x3 line.long 0x00 "SPORT2_TXPRI_B,SPORT2 Half SPORT 'B' Tx Buffer (Primary) Register" group.long 0xC4++0x3 line.long 0x00 "SPORT2_RXPRI_B,SPORT2 Half SPORT 'B' Rx Buffer (Primary) Register" group.long 0xC8++0x3 line.long 0x00 "SPORT2_TXSEC_B,SPORT2 Half SPORT 'B' Tx Buffer (Secondary) Register" group.long 0xCC++0x3 line.long 0x00 "SPORT2_RXSEC_B,SPORT2 Half SPORT 'B' Rx Buffer (Secondary) Register" tree.end tree "SPORT3" base ad:0x31002300 width 16. group.long 0x0++0x3 line.long 0x00 "SPORT3_CTL_A,SPORT3 Half SPORT 'A' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x4++0x3 line.long 0x00 "SPORT3_DIV_A,SPORT3 Half SPORT 'A' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "SPORT3_MCTL_A,SPORT3 Half SPORT 'A' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPORT3_CS0_A,SPORT3 Half SPORT 'A' Multichannel 0-31 Select Register" group.long 0x10++0x3 line.long 0x00 "SPORT3_CS1_A,SPORT3 Half SPORT 'A' Multichannel 32-63 Select Register" group.long 0x14++0x3 line.long 0x00 "SPORT3_CS2_A,SPORT3 Half SPORT 'A' Multichannel 64-95 Select Register" group.long 0x18++0x3 line.long 0x00 "SPORT3_CS3_A,SPORT3 Half SPORT 'A' Multichannel 96-127 Select Register" group.long 0x20++0x3 line.long 0x00 "SPORT3_ERR_A,SPORT3 Half SPORT 'A' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0x24++0x3 line.long 0x00 "SPORT3_MSTAT_A,SPORT3 Half SPORT 'A' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0x28++0x3 line.long 0x00 "SPORT3_CTL2_A,SPORT3 Half SPORT 'A' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0x40++0x3 line.long 0x00 "SPORT3_TXPRI_A,SPORT3 Half SPORT 'A' Tx Buffer (Primary) Register" group.long 0x44++0x3 line.long 0x00 "SPORT3_RXPRI_A,SPORT3 Half SPORT 'A' Rx Buffer (Primary) Register" group.long 0x48++0x3 line.long 0x00 "SPORT3_TXSEC_A,SPORT3 Half SPORT 'A' Tx Buffer (Secondary) Register" group.long 0x4C++0x3 line.long 0x00 "SPORT3_RXSEC_A,SPORT3 Half SPORT 'A' Rx Buffer (Secondary) Register" group.long 0x80++0x3 line.long 0x00 "SPORT3_CTL_B,SPORT3 Half SPORT 'B' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation Mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x84++0x3 line.long 0x00 "SPORT3_DIV_B,SPORT3 Half SPORT 'B' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x88++0x3 line.long 0x00 "SPORT3_MCTL_B,SPORT3 Half SPORT 'B' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel Enable" "0,1" group.long 0x8C++0x3 line.long 0x00 "SPORT3_CS0_B,SPORT3 Half SPORT 'B' Multichannel 0-31 Select Register" group.long 0x90++0x3 line.long 0x00 "SPORT3_CS1_B,SPORT3 Half SPORT 'B' Multichannel 32-63 Select Register" group.long 0x94++0x3 line.long 0x00 "SPORT3_CS2_B,SPORT3 Half SPORT 'B' Multichannel 64-95 Select Register" group.long 0x98++0x3 line.long 0x00 "SPORT3_CS3_B,SPORT3 Half SPORT 'B' Multichannel 96-127 Select Register" group.long 0xA0++0x3 line.long 0x00 "SPORT3_ERR_B,SPORT3 Half SPORT 'B' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0xA4++0x3 line.long 0x00 "SPORT3_MSTAT_B,SPORT3 Half SPORT 'B' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0xA8++0x3 line.long 0x00 "SPORT3_CTL2_B,SPORT3 Half SPORT 'B' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0xC0++0x3 line.long 0x00 "SPORT3_TXPRI_B,SPORT3 Half SPORT 'B' Tx Buffer (Primary) Register" group.long 0xC4++0x3 line.long 0x00 "SPORT3_RXPRI_B,SPORT3 Half SPORT 'B' Rx Buffer (Primary) Register" group.long 0xC8++0x3 line.long 0x00 "SPORT3_TXSEC_B,SPORT3 Half SPORT 'B' Tx Buffer (Secondary) Register" group.long 0xCC++0x3 line.long 0x00 "SPORT3_RXSEC_B,SPORT3 Half SPORT 'B' Rx Buffer (Secondary) Register" tree.end tree "SPORT4" base ad:0x31002400 width 16. group.long 0x0++0x3 line.long 0x00 "SPORT4_CTL_A,SPORT4 Half SPORT 'A' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x4++0x3 line.long 0x00 "SPORT4_DIV_A,SPORT4 Half SPORT 'A' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "SPORT4_MCTL_A,SPORT4 Half SPORT 'A' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPORT4_CS0_A,SPORT4 Half SPORT 'A' Multichannel 0-31 Select Register" group.long 0x10++0x3 line.long 0x00 "SPORT4_CS1_A,SPORT4 Half SPORT 'A' Multichannel 32-63 Select Register" group.long 0x14++0x3 line.long 0x00 "SPORT4_CS2_A,SPORT4 Half SPORT 'A' Multichannel 64-95 Select Register" group.long 0x18++0x3 line.long 0x00 "SPORT4_CS3_A,SPORT4 Half SPORT 'A' Multichannel 96-127 Select Register" group.long 0x20++0x3 line.long 0x00 "SPORT4_ERR_A,SPORT4 Half SPORT 'A' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0x24++0x3 line.long 0x00 "SPORT4_MSTAT_A,SPORT4 Half SPORT 'A' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0x28++0x3 line.long 0x00 "SPORT4_CTL2_A,SPORT4 Half SPORT 'A' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0x40++0x3 line.long 0x00 "SPORT4_TXPRI_A,SPORT4 Half SPORT 'A' Tx Buffer (Primary) Register" group.long 0x44++0x3 line.long 0x00 "SPORT4_RXPRI_A,SPORT4 Half SPORT 'A' Rx Buffer (Primary) Register" group.long 0x48++0x3 line.long 0x00 "SPORT4_TXSEC_A,SPORT4 Half SPORT 'A' Tx Buffer (Secondary) Register" group.long 0x4C++0x3 line.long 0x00 "SPORT4_RXSEC_A,SPORT4 Half SPORT 'A' Rx Buffer (Secondary) Register" group.long 0x80++0x3 line.long 0x00 "SPORT4_CTL_B,SPORT4 Half SPORT 'B' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation Mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x84++0x3 line.long 0x00 "SPORT4_DIV_B,SPORT4 Half SPORT 'B' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x88++0x3 line.long 0x00 "SPORT4_MCTL_B,SPORT4 Half SPORT 'B' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel Enable" "0,1" group.long 0x8C++0x3 line.long 0x00 "SPORT4_CS0_B,SPORT4 Half SPORT 'B' Multichannel 0-31 Select Register" group.long 0x90++0x3 line.long 0x00 "SPORT4_CS1_B,SPORT4 Half SPORT 'B' Multichannel 32-63 Select Register" group.long 0x94++0x3 line.long 0x00 "SPORT4_CS2_B,SPORT4 Half SPORT 'B' Multichannel 64-95 Select Register" group.long 0x98++0x3 line.long 0x00 "SPORT4_CS3_B,SPORT4 Half SPORT 'B' Multichannel 96-127 Select Register" group.long 0xA0++0x3 line.long 0x00 "SPORT4_ERR_B,SPORT4 Half SPORT 'B' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0xA4++0x3 line.long 0x00 "SPORT4_MSTAT_B,SPORT4 Half SPORT 'B' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0xA8++0x3 line.long 0x00 "SPORT4_CTL2_B,SPORT4 Half SPORT 'B' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0xC0++0x3 line.long 0x00 "SPORT4_TXPRI_B,SPORT4 Half SPORT 'B' Tx Buffer (Primary) Register" group.long 0xC4++0x3 line.long 0x00 "SPORT4_RXPRI_B,SPORT4 Half SPORT 'B' Rx Buffer (Primary) Register" group.long 0xC8++0x3 line.long 0x00 "SPORT4_TXSEC_B,SPORT4 Half SPORT 'B' Tx Buffer (Secondary) Register" group.long 0xCC++0x3 line.long 0x00 "SPORT4_RXSEC_B,SPORT4 Half SPORT 'B' Rx Buffer (Secondary) Register" tree.end tree "SPORT5" base ad:0x31002500 width 16. group.long 0x0++0x3 line.long 0x00 "SPORT5_CTL_A,SPORT5 Half SPORT 'A' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x4++0x3 line.long 0x00 "SPORT5_DIV_A,SPORT5 Half SPORT 'A' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "SPORT5_MCTL_A,SPORT5 Half SPORT 'A' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPORT5_CS0_A,SPORT5 Half SPORT 'A' Multichannel 0-31 Select Register" group.long 0x10++0x3 line.long 0x00 "SPORT5_CS1_A,SPORT5 Half SPORT 'A' Multichannel 32-63 Select Register" group.long 0x14++0x3 line.long 0x00 "SPORT5_CS2_A,SPORT5 Half SPORT 'A' Multichannel 64-95 Select Register" group.long 0x18++0x3 line.long 0x00 "SPORT5_CS3_A,SPORT5 Half SPORT 'A' Multichannel 96-127 Select Register" group.long 0x20++0x3 line.long 0x00 "SPORT5_ERR_A,SPORT5 Half SPORT 'A' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0x24++0x3 line.long 0x00 "SPORT5_MSTAT_A,SPORT5 Half SPORT 'A' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0x28++0x3 line.long 0x00 "SPORT5_CTL2_A,SPORT5 Half SPORT 'A' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0x40++0x3 line.long 0x00 "SPORT5_TXPRI_A,SPORT5 Half SPORT 'A' Tx Buffer (Primary) Register" group.long 0x44++0x3 line.long 0x00 "SPORT5_RXPRI_A,SPORT5 Half SPORT 'A' Rx Buffer (Primary) Register" group.long 0x48++0x3 line.long 0x00 "SPORT5_TXSEC_A,SPORT5 Half SPORT 'A' Tx Buffer (Secondary) Register" group.long 0x4C++0x3 line.long 0x00 "SPORT5_RXSEC_A,SPORT5 Half SPORT 'A' Rx Buffer (Secondary) Register" group.long 0x80++0x3 line.long 0x00 "SPORT5_CTL_B,SPORT5 Half SPORT 'B' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation Mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x84++0x3 line.long 0x00 "SPORT5_DIV_B,SPORT5 Half SPORT 'B' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x88++0x3 line.long 0x00 "SPORT5_MCTL_B,SPORT5 Half SPORT 'B' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel Enable" "0,1" group.long 0x8C++0x3 line.long 0x00 "SPORT5_CS0_B,SPORT5 Half SPORT 'B' Multichannel 0-31 Select Register" group.long 0x90++0x3 line.long 0x00 "SPORT5_CS1_B,SPORT5 Half SPORT 'B' Multichannel 32-63 Select Register" group.long 0x94++0x3 line.long 0x00 "SPORT5_CS2_B,SPORT5 Half SPORT 'B' Multichannel 64-95 Select Register" group.long 0x98++0x3 line.long 0x00 "SPORT5_CS3_B,SPORT5 Half SPORT 'B' Multichannel 96-127 Select Register" group.long 0xA0++0x3 line.long 0x00 "SPORT5_ERR_B,SPORT5 Half SPORT 'B' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0xA4++0x3 line.long 0x00 "SPORT5_MSTAT_B,SPORT5 Half SPORT 'B' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0xA8++0x3 line.long 0x00 "SPORT5_CTL2_B,SPORT5 Half SPORT 'B' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0xC0++0x3 line.long 0x00 "SPORT5_TXPRI_B,SPORT5 Half SPORT 'B' Tx Buffer (Primary) Register" group.long 0xC4++0x3 line.long 0x00 "SPORT5_RXPRI_B,SPORT5 Half SPORT 'B' Rx Buffer (Primary) Register" group.long 0xC8++0x3 line.long 0x00 "SPORT5_TXSEC_B,SPORT5 Half SPORT 'B' Tx Buffer (Secondary) Register" group.long 0xCC++0x3 line.long 0x00 "SPORT5_RXSEC_B,SPORT5 Half SPORT 'B' Rx Buffer (Secondary) Register" tree.end tree "SPORT6" base ad:0x31002600 width 16. group.long 0x0++0x3 line.long 0x00 "SPORT6_CTL_A,SPORT6 Half SPORT 'A' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x4++0x3 line.long 0x00 "SPORT6_DIV_A,SPORT6 Half SPORT 'A' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "SPORT6_MCTL_A,SPORT6 Half SPORT 'A' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPORT6_CS0_A,SPORT6 Half SPORT 'A' Multichannel 0-31 Select Register" group.long 0x10++0x3 line.long 0x00 "SPORT6_CS1_A,SPORT6 Half SPORT 'A' Multichannel 32-63 Select Register" group.long 0x14++0x3 line.long 0x00 "SPORT6_CS2_A,SPORT6 Half SPORT 'A' Multichannel 64-95 Select Register" group.long 0x18++0x3 line.long 0x00 "SPORT6_CS3_A,SPORT6 Half SPORT 'A' Multichannel 96-127 Select Register" group.long 0x20++0x3 line.long 0x00 "SPORT6_ERR_A,SPORT6 Half SPORT 'A' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0x24++0x3 line.long 0x00 "SPORT6_MSTAT_A,SPORT6 Half SPORT 'A' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0x28++0x3 line.long 0x00 "SPORT6_CTL2_A,SPORT6 Half SPORT 'A' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0x40++0x3 line.long 0x00 "SPORT6_TXPRI_A,SPORT6 Half SPORT 'A' Tx Buffer (Primary) Register" group.long 0x44++0x3 line.long 0x00 "SPORT6_RXPRI_A,SPORT6 Half SPORT 'A' Rx Buffer (Primary) Register" group.long 0x48++0x3 line.long 0x00 "SPORT6_TXSEC_A,SPORT6 Half SPORT 'A' Tx Buffer (Secondary) Register" group.long 0x4C++0x3 line.long 0x00 "SPORT6_RXSEC_A,SPORT6 Half SPORT 'A' Rx Buffer (Secondary) Register" group.long 0x80++0x3 line.long 0x00 "SPORT6_CTL_B,SPORT6 Half SPORT 'B' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation Mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x84++0x3 line.long 0x00 "SPORT6_DIV_B,SPORT6 Half SPORT 'B' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x88++0x3 line.long 0x00 "SPORT6_MCTL_B,SPORT6 Half SPORT 'B' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel Enable" "0,1" group.long 0x8C++0x3 line.long 0x00 "SPORT6_CS0_B,SPORT6 Half SPORT 'B' Multichannel 0-31 Select Register" group.long 0x90++0x3 line.long 0x00 "SPORT6_CS1_B,SPORT6 Half SPORT 'B' Multichannel 32-63 Select Register" group.long 0x94++0x3 line.long 0x00 "SPORT6_CS2_B,SPORT6 Half SPORT 'B' Multichannel 64-95 Select Register" group.long 0x98++0x3 line.long 0x00 "SPORT6_CS3_B,SPORT6 Half SPORT 'B' Multichannel 96-127 Select Register" group.long 0xA0++0x3 line.long 0x00 "SPORT6_ERR_B,SPORT6 Half SPORT 'B' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0xA4++0x3 line.long 0x00 "SPORT6_MSTAT_B,SPORT6 Half SPORT 'B' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0xA8++0x3 line.long 0x00 "SPORT6_CTL2_B,SPORT6 Half SPORT 'B' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0xC0++0x3 line.long 0x00 "SPORT6_TXPRI_B,SPORT6 Half SPORT 'B' Tx Buffer (Primary) Register" group.long 0xC4++0x3 line.long 0x00 "SPORT6_RXPRI_B,SPORT6 Half SPORT 'B' Rx Buffer (Primary) Register" group.long 0xC8++0x3 line.long 0x00 "SPORT6_TXSEC_B,SPORT6 Half SPORT 'B' Tx Buffer (Secondary) Register" group.long 0xCC++0x3 line.long 0x00 "SPORT6_RXSEC_B,SPORT6 Half SPORT 'B' Rx Buffer (Secondary) Register" tree.end tree "SPORT7" base ad:0x31002700 width 16. group.long 0x0++0x3 line.long 0x00 "SPORT7_CTL_A,SPORT7 Half SPORT 'A' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x4++0x3 line.long 0x00 "SPORT7_DIV_A,SPORT7 Half SPORT 'A' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x8++0x3 line.long 0x00 "SPORT7_MCTL_A,SPORT7 Half SPORT 'A' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel enable" "0,1" group.long 0xC++0x3 line.long 0x00 "SPORT7_CS0_A,SPORT7 Half SPORT 'A' Multichannel 0-31 Select Register" group.long 0x10++0x3 line.long 0x00 "SPORT7_CS1_A,SPORT7 Half SPORT 'A' Multichannel 32-63 Select Register" group.long 0x14++0x3 line.long 0x00 "SPORT7_CS2_A,SPORT7 Half SPORT 'A' Multichannel 64-95 Select Register" group.long 0x18++0x3 line.long 0x00 "SPORT7_CS3_A,SPORT7 Half SPORT 'A' Multichannel 96-127 Select Register" group.long 0x20++0x3 line.long 0x00 "SPORT7_ERR_A,SPORT7 Half SPORT 'A' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0x24++0x3 line.long 0x00 "SPORT7_MSTAT_A,SPORT7 Half SPORT 'A' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0x28++0x3 line.long 0x00 "SPORT7_CTL2_A,SPORT7 Half SPORT 'A' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0x40++0x3 line.long 0x00 "SPORT7_TXPRI_A,SPORT7 Half SPORT 'A' Tx Buffer (Primary) Register" group.long 0x44++0x3 line.long 0x00 "SPORT7_RXPRI_A,SPORT7 Half SPORT 'A' Rx Buffer (Primary) Register" group.long 0x48++0x3 line.long 0x00 "SPORT7_TXSEC_A,SPORT7 Half SPORT 'A' Tx Buffer (Secondary) Register" group.long 0x4C++0x3 line.long 0x00 "SPORT7_RXSEC_A,SPORT7 Half SPORT 'A' Rx Buffer (Secondary) Register" group.long 0x80++0x3 line.long 0x00 "SPORT7_CTL_B,SPORT7 Half SPORT 'B' Control Register" bitfld.long 0x00 30.--31. " DXSPRI ,Data Transfer Buffer Status (Primary)" "0,1,2,3" bitfld.long 0x00 29. " DERRPRI ,Data Error Status (Primary)" "0,1" bitfld.long 0x00 27.--28. " DXSSEC ,Data Transfer Buffer Status (Secondary)" "0,1,2,3" bitfld.long 0x00 26. " DERRSEC ,Data Error Status (Secondary)" "0,1" newline bitfld.long 0x00 25. " SPTRAN ,Serial Port Transfer Direction" "0,1" bitfld.long 0x00 24. " SPENSEC ,Serial Port Enable (Secondary)" "0,1" bitfld.long 0x00 21. " GCLKEN ,Gated Clock Enable" "0,1" bitfld.long 0x00 20. " TFIEN ,Transmit Finish Interrupt Enable" "0,1" newline bitfld.long 0x00 19. " FSED ,Frame Sync Edge Detect" "0,1" bitfld.long 0x00 18. " RJUST ,Right-Justified Operation Mode" "0,1" bitfld.long 0x00 17. " LAFS ,Late Frame Sync / OPMODE2" "0,1" bitfld.long 0x00 16. " LFS ,Active-Low Frame Sync / L_FIRST / PLFS" "0,1" newline bitfld.long 0x00 15. " DIFS ,Data-Independent Frame Sync" "0,1" bitfld.long 0x00 14. " IFS ,Internal Frame Sync" "0,1" bitfld.long 0x00 13. " FSR ,Frame Sync Required" "0,1" bitfld.long 0x00 12. " CKRE ,Clock Rising Edge" "0,1" newline bitfld.long 0x00 11. " OPMODE ,Operation Mode" "0,1" bitfld.long 0x00 10. " ICLK ,Internal Clock" "0,1" bitfld.long 0x00 9. " PACK ,Packing Enable" "0,1" bitfld.long 0x00 4.--8. " SLEN ,Serial Word Length" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" newline bitfld.long 0x00 3. " LSBF ,Least-Significant Bit First" "0,1" bitfld.long 0x00 1.--2. " DTYPE ,Data Type" "0,1,2,3" bitfld.long 0x00 0. " SPENPRI ,Serial Port Enable (Primary)" "0,1" group.long 0x84++0x3 line.long 0x00 "SPORT7_DIV_B,SPORT7 Half SPORT 'B' Divisor Register" hexmask.long.word 0x00 16.--31. 1. " FSDIV ,Frame Sync Divisor" hexmask.long.word 0x00 0.--15. 1. " CLKDIV ,Clock Divisor" group.long 0x88++0x3 line.long 0x00 "SPORT7_MCTL_B,SPORT7 Half SPORT 'B' Multichannel Control Register" hexmask.long.word 0x00 16.--25. 1. " WOFFSET ,Window Offset" hexmask.long.byte 0x00 8.--14. 1. " WSIZE ,Window Size" bitfld.long 0x00 4.--7. " MFD ,Multichannel Frame Delay" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 2. " MCPDE ,Multichannel Packing DMA Enable" "0,1" newline bitfld.long 0x00 0. " MCE ,Multichannel Enable" "0,1" group.long 0x8C++0x3 line.long 0x00 "SPORT7_CS0_B,SPORT7 Half SPORT 'B' Multichannel 0-31 Select Register" group.long 0x90++0x3 line.long 0x00 "SPORT7_CS1_B,SPORT7 Half SPORT 'B' Multichannel 32-63 Select Register" group.long 0x94++0x3 line.long 0x00 "SPORT7_CS2_B,SPORT7 Half SPORT 'B' Multichannel 64-95 Select Register" group.long 0x98++0x3 line.long 0x00 "SPORT7_CS3_B,SPORT7 Half SPORT 'B' Multichannel 96-127 Select Register" group.long 0xA0++0x3 line.long 0x00 "SPORT7_ERR_B,SPORT7 Half SPORT 'B' Error Register" bitfld.long 0x00 6. " FSERRSTAT ,Frame Sync Error Status" "0,1" bitfld.long 0x00 5. " DERRSSTAT ,Data Error Secondary Status" "0,1" bitfld.long 0x00 4. " DERRPSTAT ,Data Error Primary Status" "0,1" bitfld.long 0x00 2. " FSERRMSK ,Frame Sync Error (Interrupt) Mask" "0,1" newline bitfld.long 0x00 1. " DERRSMSK ,Data Error Secondary (Interrupt) Mask" "0,1" bitfld.long 0x00 0. " DERRPMSK ,Data Error Primary (Interrupt) Mask" "0,1" group.long 0xA4++0x3 line.long 0x00 "SPORT7_MSTAT_B,SPORT7 Half SPORT 'B' Multichannel Status Register" hexmask.long.word 0x00 0.--9. 1. " CURCHAN ,Current Channel" group.long 0xA8++0x3 line.long 0x00 "SPORT7_CTL2_B,SPORT7 Half SPORT 'B' Control 2 Register" bitfld.long 0x00 1. " CKMUXSEL ,Clock Multiplexer Select" "0,1" bitfld.long 0x00 0. " FSMUXSEL ,Frame Sync Multiplexer Select" "0,1" group.long 0xC0++0x3 line.long 0x00 "SPORT7_TXPRI_B,SPORT7 Half SPORT 'B' Tx Buffer (Primary) Register" group.long 0xC4++0x3 line.long 0x00 "SPORT7_RXPRI_B,SPORT7 Half SPORT 'B' Rx Buffer (Primary) Register" group.long 0xC8++0x3 line.long 0x00 "SPORT7_TXSEC_B,SPORT7 Half SPORT 'B' Tx Buffer (Secondary) Register" group.long 0xCC++0x3 line.long 0x00 "SPORT7_RXSEC_B,SPORT7 Half SPORT 'B' Rx Buffer (Secondary) Register" tree.end tree.end tree "SPU (System Protection Unit)" base ad:0x3108C000 width 17. group.long 0x0++0x3 line.long 0x00 "SPU0_CTL,SPU0 Control Register" bitfld.long 0x00 16. " WPLCK ,Write Protect Register Lock" "0,1" bitfld.long 0x00 14. " PINTEN ,Protection Violation Interrupt Enable" "0,1" hexmask.long.byte 0x00 0.--7. 1. " GLCK ,Global Lock" group.long 0x4++0x3 line.long 0x00 "SPU0_STAT,SPU0 Status Register" bitfld.long 0x00 31. " LWERR ,Lock Write Error" "0,1" bitfld.long 0x00 30. " ADDRERR ,Address Error" "0,1" bitfld.long 0x00 12. " VIRQ ,Violation Interrupt Request" "0,1" bitfld.long 0x00 0. " GLCK ,Global Lock Status" "0,1" group.long 0x400++0x3 line.long 0x00 "SPU0_WP0,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x404++0x3 line.long 0x00 "SPU0_WP1,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x408++0x3 line.long 0x00 "SPU0_WP2,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x40C++0x3 line.long 0x00 "SPU0_WP3,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x410++0x3 line.long 0x00 "SPU0_WP4,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x414++0x3 line.long 0x00 "SPU0_WP5,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x418++0x3 line.long 0x00 "SPU0_WP6,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x41C++0x3 line.long 0x00 "SPU0_WP7,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x420++0x3 line.long 0x00 "SPU0_WP8,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x424++0x3 line.long 0x00 "SPU0_WP9,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x428++0x3 line.long 0x00 "SPU0_WP10,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x42C++0x3 line.long 0x00 "SPU0_WP11,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x430++0x3 line.long 0x00 "SPU0_WP12,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x434++0x3 line.long 0x00 "SPU0_WP13,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x438++0x3 line.long 0x00 "SPU0_WP14,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x43C++0x3 line.long 0x00 "SPU0_WP15,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x440++0x3 line.long 0x00 "SPU0_WP16,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x444++0x3 line.long 0x00 "SPU0_WP17,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x448++0x3 line.long 0x00 "SPU0_WP18,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x44C++0x3 line.long 0x00 "SPU0_WP19,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x450++0x3 line.long 0x00 "SPU0_WP20,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x454++0x3 line.long 0x00 "SPU0_WP21,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x458++0x3 line.long 0x00 "SPU0_WP22,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x45C++0x3 line.long 0x00 "SPU0_WP23,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x460++0x3 line.long 0x00 "SPU0_WP24,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x464++0x3 line.long 0x00 "SPU0_WP25,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x468++0x3 line.long 0x00 "SPU0_WP26,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x46C++0x3 line.long 0x00 "SPU0_WP27,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x470++0x3 line.long 0x00 "SPU0_WP28,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x474++0x3 line.long 0x00 "SPU0_WP29,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x478++0x3 line.long 0x00 "SPU0_WP30,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x47C++0x3 line.long 0x00 "SPU0_WP31,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x480++0x3 line.long 0x00 "SPU0_WP32,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x484++0x3 line.long 0x00 "SPU0_WP33,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x488++0x3 line.long 0x00 "SPU0_WP34,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x48C++0x3 line.long 0x00 "SPU0_WP35,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x490++0x3 line.long 0x00 "SPU0_WP36,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x494++0x3 line.long 0x00 "SPU0_WP37,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x498++0x3 line.long 0x00 "SPU0_WP38,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x49C++0x3 line.long 0x00 "SPU0_WP39,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4A0++0x3 line.long 0x00 "SPU0_WP40,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4A4++0x3 line.long 0x00 "SPU0_WP41,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4A8++0x3 line.long 0x00 "SPU0_WP42,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4AC++0x3 line.long 0x00 "SPU0_WP43,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4B0++0x3 line.long 0x00 "SPU0_WP44,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4B4++0x3 line.long 0x00 "SPU0_WP45,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4B8++0x3 line.long 0x00 "SPU0_WP46,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4BC++0x3 line.long 0x00 "SPU0_WP47,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4C0++0x3 line.long 0x00 "SPU0_WP48,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4C4++0x3 line.long 0x00 "SPU0_WP49,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4C8++0x3 line.long 0x00 "SPU0_WP50,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4CC++0x3 line.long 0x00 "SPU0_WP51,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4D0++0x3 line.long 0x00 "SPU0_WP52,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4D4++0x3 line.long 0x00 "SPU0_WP53,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4D8++0x3 line.long 0x00 "SPU0_WP54,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4DC++0x3 line.long 0x00 "SPU0_WP55,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4E0++0x3 line.long 0x00 "SPU0_WP56,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4E4++0x3 line.long 0x00 "SPU0_WP57,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4E8++0x3 line.long 0x00 "SPU0_WP58,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4EC++0x3 line.long 0x00 "SPU0_WP59,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4F0++0x3 line.long 0x00 "SPU0_WP60,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4F4++0x3 line.long 0x00 "SPU0_WP61,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4F8++0x3 line.long 0x00 "SPU0_WP62,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x4FC++0x3 line.long 0x00 "SPU0_WP63,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x500++0x3 line.long 0x00 "SPU0_WP64,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x504++0x3 line.long 0x00 "SPU0_WP65,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x508++0x3 line.long 0x00 "SPU0_WP66,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x50C++0x3 line.long 0x00 "SPU0_WP67,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x510++0x3 line.long 0x00 "SPU0_WP68,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x514++0x3 line.long 0x00 "SPU0_WP69,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x518++0x3 line.long 0x00 "SPU0_WP70,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x51C++0x3 line.long 0x00 "SPU0_WP71,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x520++0x3 line.long 0x00 "SPU0_WP72,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x524++0x3 line.long 0x00 "SPU0_WP73,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x528++0x3 line.long 0x00 "SPU0_WP74,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x52C++0x3 line.long 0x00 "SPU0_WP75,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x530++0x3 line.long 0x00 "SPU0_WP76,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x534++0x3 line.long 0x00 "SPU0_WP77,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x538++0x3 line.long 0x00 "SPU0_WP78,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x53C++0x3 line.long 0x00 "SPU0_WP79,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x540++0x3 line.long 0x00 "SPU0_WP80,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x544++0x3 line.long 0x00 "SPU0_WP81,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x548++0x3 line.long 0x00 "SPU0_WP82,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x54C++0x3 line.long 0x00 "SPU0_WP83,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x550++0x3 line.long 0x00 "SPU0_WP84,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x554++0x3 line.long 0x00 "SPU0_WP85,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x558++0x3 line.long 0x00 "SPU0_WP86,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x55C++0x3 line.long 0x00 "SPU0_WP87,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x560++0x3 line.long 0x00 "SPU0_WP88,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x564++0x3 line.long 0x00 "SPU0_WP89,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x568++0x3 line.long 0x00 "SPU0_WP90,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x56C++0x3 line.long 0x00 "SPU0_WP91,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x570++0x3 line.long 0x00 "SPU0_WP92,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x574++0x3 line.long 0x00 "SPU0_WP93,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x578++0x3 line.long 0x00 "SPU0_WP94,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x57C++0x3 line.long 0x00 "SPU0_WP95,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x580++0x3 line.long 0x00 "SPU0_WP96,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x584++0x3 line.long 0x00 "SPU0_WP97,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x588++0x3 line.long 0x00 "SPU0_WP98,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x58C++0x3 line.long 0x00 "SPU0_WP99,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x590++0x3 line.long 0x00 "SPU0_WP100,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x594++0x3 line.long 0x00 "SPU0_WP101,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x598++0x3 line.long 0x00 "SPU0_WP102,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x59C++0x3 line.long 0x00 "SPU0_WP103,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5A0++0x3 line.long 0x00 "SPU0_WP104,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5A4++0x3 line.long 0x00 "SPU0_WP105,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5A8++0x3 line.long 0x00 "SPU0_WP106,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5AC++0x3 line.long 0x00 "SPU0_WP107,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5B0++0x3 line.long 0x00 "SPU0_WP108,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5B4++0x3 line.long 0x00 "SPU0_WP109,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5B8++0x3 line.long 0x00 "SPU0_WP110,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5BC++0x3 line.long 0x00 "SPU0_WP111,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5C0++0x3 line.long 0x00 "SPU0_WP112,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5C4++0x3 line.long 0x00 "SPU0_WP113,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5C8++0x3 line.long 0x00 "SPU0_WP114,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5CC++0x3 line.long 0x00 "SPU0_WP115,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5D0++0x3 line.long 0x00 "SPU0_WP116,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5D4++0x3 line.long 0x00 "SPU0_WP117,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5D8++0x3 line.long 0x00 "SPU0_WP118,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5DC++0x3 line.long 0x00 "SPU0_WP119,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5E0++0x3 line.long 0x00 "SPU0_WP120,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5E4++0x3 line.long 0x00 "SPU0_WP121,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5E8++0x3 line.long 0x00 "SPU0_WP122,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5EC++0x3 line.long 0x00 "SPU0_WP123,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5F0++0x3 line.long 0x00 "SPU0_WP124,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5F4++0x3 line.long 0x00 "SPU0_WP125,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5F8++0x3 line.long 0x00 "SPU0_WP126,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x5FC++0x3 line.long 0x00 "SPU0_WP127,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x600++0x3 line.long 0x00 "SPU0_WP128,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x604++0x3 line.long 0x00 "SPU0_WP129,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x608++0x3 line.long 0x00 "SPU0_WP130,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x60C++0x3 line.long 0x00 "SPU0_WP131,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x610++0x3 line.long 0x00 "SPU0_WP132,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x614++0x3 line.long 0x00 "SPU0_WP133,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x618++0x3 line.long 0x00 "SPU0_WP134,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x61C++0x3 line.long 0x00 "SPU0_WP135,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x620++0x3 line.long 0x00 "SPU0_WP136,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x624++0x3 line.long 0x00 "SPU0_WP137,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x628++0x3 line.long 0x00 "SPU0_WP138,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x62C++0x3 line.long 0x00 "SPU0_WP139,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x630++0x3 line.long 0x00 "SPU0_WP140,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x634++0x3 line.long 0x00 "SPU0_WP141,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x638++0x3 line.long 0x00 "SPU0_WP142,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x63C++0x3 line.long 0x00 "SPU0_WP143,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x640++0x3 line.long 0x00 "SPU0_WP144,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x644++0x3 line.long 0x00 "SPU0_WP145,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x648++0x3 line.long 0x00 "SPU0_WP146,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x64C++0x3 line.long 0x00 "SPU0_WP147,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x650++0x3 line.long 0x00 "SPU0_WP148,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x654++0x3 line.long 0x00 "SPU0_WP149,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x658++0x3 line.long 0x00 "SPU0_WP150,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x65C++0x3 line.long 0x00 "SPU0_WP151,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x660++0x3 line.long 0x00 "SPU0_WP152,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x664++0x3 line.long 0x00 "SPU0_WP153,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x668++0x3 line.long 0x00 "SPU0_WP154,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x66C++0x3 line.long 0x00 "SPU0_WP155,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x670++0x3 line.long 0x00 "SPU0_WP156,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x674++0x3 line.long 0x00 "SPU0_WP157,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x678++0x3 line.long 0x00 "SPU0_WP158,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x67C++0x3 line.long 0x00 "SPU0_WP159,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x680++0x3 line.long 0x00 "SPU0_WP160,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x684++0x3 line.long 0x00 "SPU0_WP161,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x688++0x3 line.long 0x00 "SPU0_WP162,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x68C++0x3 line.long 0x00 "SPU0_WP163,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x690++0x3 line.long 0x00 "SPU0_WP164,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x694++0x3 line.long 0x00 "SPU0_WP165,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x698++0x3 line.long 0x00 "SPU0_WP166,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x69C++0x3 line.long 0x00 "SPU0_WP167,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6A0++0x3 line.long 0x00 "SPU0_WP168,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6A4++0x3 line.long 0x00 "SPU0_WP169,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6A8++0x3 line.long 0x00 "SPU0_WP170,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6AC++0x3 line.long 0x00 "SPU0_WP171,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6B0++0x3 line.long 0x00 "SPU0_WP172,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6B4++0x3 line.long 0x00 "SPU0_WP173,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6B8++0x3 line.long 0x00 "SPU0_WP174,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6BC++0x3 line.long 0x00 "SPU0_WP175,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6C0++0x3 line.long 0x00 "SPU0_WP176,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6C4++0x3 line.long 0x00 "SPU0_WP177,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6C8++0x3 line.long 0x00 "SPU0_WP178,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6CC++0x3 line.long 0x00 "SPU0_WP179,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6D0++0x3 line.long 0x00 "SPU0_WP180,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6D4++0x3 line.long 0x00 "SPU0_WP181,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6D8++0x3 line.long 0x00 "SPU0_WP182,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6DC++0x3 line.long 0x00 "SPU0_WP183,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6E0++0x3 line.long 0x00 "SPU0_WP184,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6E4++0x3 line.long 0x00 "SPU0_WP185,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6E8++0x3 line.long 0x00 "SPU0_WP186,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6EC++0x3 line.long 0x00 "SPU0_WP187,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x6F0++0x3 line.long 0x00 "SPU0_WP188,SPU0 Write Protect Register n" bitfld.long 0x00 19. " SM3 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 18. " SM2 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 17. " SM1 ,System Master x Write Protect Enable" "0,1" bitfld.long 0x00 16. " SM0 ,System Master x Write Protect Enable" "0,1" newline bitfld.long 0x00 2. " CM2 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 1. " CM1 ,Core Master x Write Protect Enable" "0,1" bitfld.long 0x00 0. " CM0 ,Core Master x Write Protect Enable" "0,1" group.long 0x840++0x3 line.long 0x00 "SPU0_SECURECTL,SPU0 Secure Control Register" bitfld.long 0x00 16. " SCRLCK ,Secure Register Lock" "0,1" bitfld.long 0x00 14. " SINTEN ,Secure Violation Interrupt Enable" "0,1" bitfld.long 0x00 5. " MSECCLR ,Master Secure Clear" "0,1" bitfld.long 0x00 4. " SSECCLR ,Slave Secure Clear" "0,1" group.long 0x84C++0x3 line.long 0x00 "SPU0_SECURECHK,SPU0 Secure Check Register" group.long 0x980++0x3 line.long 0x00 "SPU0_SECUREC0,SPU0 Secure Core Registers" bitfld.long 0x00 0. " CSEC0 ,Core Secure" "0,1" group.long 0x984++0x3 line.long 0x00 "SPU0_SECUREC1,SPU0 Secure Core Registers" bitfld.long 0x00 0. " CSEC0 ,Core Secure" "0,1" group.long 0x988++0x3 line.long 0x00 "SPU0_SECUREC2,SPU0 Secure Core Registers" bitfld.long 0x00 0. " CSEC0 ,Core Secure" "0,1" group.long 0xA00++0x3 line.long 0x00 "SPU0_SECUREP0,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA04++0x3 line.long 0x00 "SPU0_SECUREP1,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA08++0x3 line.long 0x00 "SPU0_SECUREP2,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA0C++0x3 line.long 0x00 "SPU0_SECUREP3,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA10++0x3 line.long 0x00 "SPU0_SECUREP4,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA14++0x3 line.long 0x00 "SPU0_SECUREP5,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA18++0x3 line.long 0x00 "SPU0_SECUREP6,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA1C++0x3 line.long 0x00 "SPU0_SECUREP7,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA20++0x3 line.long 0x00 "SPU0_SECUREP8,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA24++0x3 line.long 0x00 "SPU0_SECUREP9,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA28++0x3 line.long 0x00 "SPU0_SECUREP10,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA2C++0x3 line.long 0x00 "SPU0_SECUREP11,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA30++0x3 line.long 0x00 "SPU0_SECUREP12,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA34++0x3 line.long 0x00 "SPU0_SECUREP13,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA38++0x3 line.long 0x00 "SPU0_SECUREP14,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA3C++0x3 line.long 0x00 "SPU0_SECUREP15,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA40++0x3 line.long 0x00 "SPU0_SECUREP16,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA44++0x3 line.long 0x00 "SPU0_SECUREP17,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA48++0x3 line.long 0x00 "SPU0_SECUREP18,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA4C++0x3 line.long 0x00 "SPU0_SECUREP19,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA50++0x3 line.long 0x00 "SPU0_SECUREP20,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA54++0x3 line.long 0x00 "SPU0_SECUREP21,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA58++0x3 line.long 0x00 "SPU0_SECUREP22,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA5C++0x3 line.long 0x00 "SPU0_SECUREP23,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA60++0x3 line.long 0x00 "SPU0_SECUREP24,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA64++0x3 line.long 0x00 "SPU0_SECUREP25,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA68++0x3 line.long 0x00 "SPU0_SECUREP26,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA6C++0x3 line.long 0x00 "SPU0_SECUREP27,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA70++0x3 line.long 0x00 "SPU0_SECUREP28,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA74++0x3 line.long 0x00 "SPU0_SECUREP29,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA78++0x3 line.long 0x00 "SPU0_SECUREP30,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA7C++0x3 line.long 0x00 "SPU0_SECUREP31,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA80++0x3 line.long 0x00 "SPU0_SECUREP32,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA84++0x3 line.long 0x00 "SPU0_SECUREP33,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA88++0x3 line.long 0x00 "SPU0_SECUREP34,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA8C++0x3 line.long 0x00 "SPU0_SECUREP35,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA90++0x3 line.long 0x00 "SPU0_SECUREP36,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA94++0x3 line.long 0x00 "SPU0_SECUREP37,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA98++0x3 line.long 0x00 "SPU0_SECUREP38,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xA9C++0x3 line.long 0x00 "SPU0_SECUREP39,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAA0++0x3 line.long 0x00 "SPU0_SECUREP40,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAA4++0x3 line.long 0x00 "SPU0_SECUREP41,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAA8++0x3 line.long 0x00 "SPU0_SECUREP42,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAAC++0x3 line.long 0x00 "SPU0_SECUREP43,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAB0++0x3 line.long 0x00 "SPU0_SECUREP44,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAB4++0x3 line.long 0x00 "SPU0_SECUREP45,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAB8++0x3 line.long 0x00 "SPU0_SECUREP46,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xABC++0x3 line.long 0x00 "SPU0_SECUREP47,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAC0++0x3 line.long 0x00 "SPU0_SECUREP48,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAC4++0x3 line.long 0x00 "SPU0_SECUREP49,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAC8++0x3 line.long 0x00 "SPU0_SECUREP50,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xACC++0x3 line.long 0x00 "SPU0_SECUREP51,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAD0++0x3 line.long 0x00 "SPU0_SECUREP52,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAD4++0x3 line.long 0x00 "SPU0_SECUREP53,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAD8++0x3 line.long 0x00 "SPU0_SECUREP54,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xADC++0x3 line.long 0x00 "SPU0_SECUREP55,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAE0++0x3 line.long 0x00 "SPU0_SECUREP56,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAE4++0x3 line.long 0x00 "SPU0_SECUREP57,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAE8++0x3 line.long 0x00 "SPU0_SECUREP58,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAEC++0x3 line.long 0x00 "SPU0_SECUREP59,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAF0++0x3 line.long 0x00 "SPU0_SECUREP60,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAF4++0x3 line.long 0x00 "SPU0_SECUREP61,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAF8++0x3 line.long 0x00 "SPU0_SECUREP62,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xAFC++0x3 line.long 0x00 "SPU0_SECUREP63,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB00++0x3 line.long 0x00 "SPU0_SECUREP64,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB04++0x3 line.long 0x00 "SPU0_SECUREP65,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB08++0x3 line.long 0x00 "SPU0_SECUREP66,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB0C++0x3 line.long 0x00 "SPU0_SECUREP67,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB10++0x3 line.long 0x00 "SPU0_SECUREP68,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB14++0x3 line.long 0x00 "SPU0_SECUREP69,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB18++0x3 line.long 0x00 "SPU0_SECUREP70,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB1C++0x3 line.long 0x00 "SPU0_SECUREP71,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB20++0x3 line.long 0x00 "SPU0_SECUREP72,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB24++0x3 line.long 0x00 "SPU0_SECUREP73,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB28++0x3 line.long 0x00 "SPU0_SECUREP74,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB2C++0x3 line.long 0x00 "SPU0_SECUREP75,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB30++0x3 line.long 0x00 "SPU0_SECUREP76,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB34++0x3 line.long 0x00 "SPU0_SECUREP77,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB38++0x3 line.long 0x00 "SPU0_SECUREP78,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB3C++0x3 line.long 0x00 "SPU0_SECUREP79,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB40++0x3 line.long 0x00 "SPU0_SECUREP80,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB44++0x3 line.long 0x00 "SPU0_SECUREP81,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB48++0x3 line.long 0x00 "SPU0_SECUREP82,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB4C++0x3 line.long 0x00 "SPU0_SECUREP83,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB50++0x3 line.long 0x00 "SPU0_SECUREP84,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB54++0x3 line.long 0x00 "SPU0_SECUREP85,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB58++0x3 line.long 0x00 "SPU0_SECUREP86,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB5C++0x3 line.long 0x00 "SPU0_SECUREP87,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB60++0x3 line.long 0x00 "SPU0_SECUREP88,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB64++0x3 line.long 0x00 "SPU0_SECUREP89,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB68++0x3 line.long 0x00 "SPU0_SECUREP90,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB6C++0x3 line.long 0x00 "SPU0_SECUREP91,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB70++0x3 line.long 0x00 "SPU0_SECUREP92,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB74++0x3 line.long 0x00 "SPU0_SECUREP93,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB78++0x3 line.long 0x00 "SPU0_SECUREP94,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB7C++0x3 line.long 0x00 "SPU0_SECUREP95,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB80++0x3 line.long 0x00 "SPU0_SECUREP96,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB84++0x3 line.long 0x00 "SPU0_SECUREP97,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB88++0x3 line.long 0x00 "SPU0_SECUREP98,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB8C++0x3 line.long 0x00 "SPU0_SECUREP99,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB90++0x3 line.long 0x00 "SPU0_SECUREP100,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB94++0x3 line.long 0x00 "SPU0_SECUREP101,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB98++0x3 line.long 0x00 "SPU0_SECUREP102,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xB9C++0x3 line.long 0x00 "SPU0_SECUREP103,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBA0++0x3 line.long 0x00 "SPU0_SECUREP104,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBA4++0x3 line.long 0x00 "SPU0_SECUREP105,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBA8++0x3 line.long 0x00 "SPU0_SECUREP106,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBAC++0x3 line.long 0x00 "SPU0_SECUREP107,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBB0++0x3 line.long 0x00 "SPU0_SECUREP108,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBB4++0x3 line.long 0x00 "SPU0_SECUREP109,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBB8++0x3 line.long 0x00 "SPU0_SECUREP110,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBBC++0x3 line.long 0x00 "SPU0_SECUREP111,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBC0++0x3 line.long 0x00 "SPU0_SECUREP112,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBC4++0x3 line.long 0x00 "SPU0_SECUREP113,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBC8++0x3 line.long 0x00 "SPU0_SECUREP114,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBCC++0x3 line.long 0x00 "SPU0_SECUREP115,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBD0++0x3 line.long 0x00 "SPU0_SECUREP116,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBD4++0x3 line.long 0x00 "SPU0_SECUREP117,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBD8++0x3 line.long 0x00 "SPU0_SECUREP118,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBDC++0x3 line.long 0x00 "SPU0_SECUREP119,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBE0++0x3 line.long 0x00 "SPU0_SECUREP120,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBE4++0x3 line.long 0x00 "SPU0_SECUREP121,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBE8++0x3 line.long 0x00 "SPU0_SECUREP122,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBEC++0x3 line.long 0x00 "SPU0_SECUREP123,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBF0++0x3 line.long 0x00 "SPU0_SECUREP124,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBF4++0x3 line.long 0x00 "SPU0_SECUREP125,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBF8++0x3 line.long 0x00 "SPU0_SECUREP126,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xBFC++0x3 line.long 0x00 "SPU0_SECUREP127,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC00++0x3 line.long 0x00 "SPU0_SECUREP128,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC04++0x3 line.long 0x00 "SPU0_SECUREP129,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC08++0x3 line.long 0x00 "SPU0_SECUREP130,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC0C++0x3 line.long 0x00 "SPU0_SECUREP131,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC10++0x3 line.long 0x00 "SPU0_SECUREP132,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC14++0x3 line.long 0x00 "SPU0_SECUREP133,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC18++0x3 line.long 0x00 "SPU0_SECUREP134,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC1C++0x3 line.long 0x00 "SPU0_SECUREP135,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC20++0x3 line.long 0x00 "SPU0_SECUREP136,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC24++0x3 line.long 0x00 "SPU0_SECUREP137,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC28++0x3 line.long 0x00 "SPU0_SECUREP138,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC2C++0x3 line.long 0x00 "SPU0_SECUREP139,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC30++0x3 line.long 0x00 "SPU0_SECUREP140,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC34++0x3 line.long 0x00 "SPU0_SECUREP141,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC38++0x3 line.long 0x00 "SPU0_SECUREP142,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC3C++0x3 line.long 0x00 "SPU0_SECUREP143,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC40++0x3 line.long 0x00 "SPU0_SECUREP144,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC44++0x3 line.long 0x00 "SPU0_SECUREP145,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC48++0x3 line.long 0x00 "SPU0_SECUREP146,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC4C++0x3 line.long 0x00 "SPU0_SECUREP147,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC50++0x3 line.long 0x00 "SPU0_SECUREP148,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC54++0x3 line.long 0x00 "SPU0_SECUREP149,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC58++0x3 line.long 0x00 "SPU0_SECUREP150,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC5C++0x3 line.long 0x00 "SPU0_SECUREP151,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC60++0x3 line.long 0x00 "SPU0_SECUREP152,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC64++0x3 line.long 0x00 "SPU0_SECUREP153,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC68++0x3 line.long 0x00 "SPU0_SECUREP154,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC6C++0x3 line.long 0x00 "SPU0_SECUREP155,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC70++0x3 line.long 0x00 "SPU0_SECUREP156,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC74++0x3 line.long 0x00 "SPU0_SECUREP157,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC78++0x3 line.long 0x00 "SPU0_SECUREP158,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC7C++0x3 line.long 0x00 "SPU0_SECUREP159,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC80++0x3 line.long 0x00 "SPU0_SECUREP160,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC84++0x3 line.long 0x00 "SPU0_SECUREP161,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC88++0x3 line.long 0x00 "SPU0_SECUREP162,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC8C++0x3 line.long 0x00 "SPU0_SECUREP163,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC90++0x3 line.long 0x00 "SPU0_SECUREP164,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC94++0x3 line.long 0x00 "SPU0_SECUREP165,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC98++0x3 line.long 0x00 "SPU0_SECUREP166,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xC9C++0x3 line.long 0x00 "SPU0_SECUREP167,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCA0++0x3 line.long 0x00 "SPU0_SECUREP168,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCA4++0x3 line.long 0x00 "SPU0_SECUREP169,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCA8++0x3 line.long 0x00 "SPU0_SECUREP170,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCAC++0x3 line.long 0x00 "SPU0_SECUREP171,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCB0++0x3 line.long 0x00 "SPU0_SECUREP172,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCB4++0x3 line.long 0x00 "SPU0_SECUREP173,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCB8++0x3 line.long 0x00 "SPU0_SECUREP174,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCBC++0x3 line.long 0x00 "SPU0_SECUREP175,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCC0++0x3 line.long 0x00 "SPU0_SECUREP176,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCC4++0x3 line.long 0x00 "SPU0_SECUREP177,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCC8++0x3 line.long 0x00 "SPU0_SECUREP178,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCCC++0x3 line.long 0x00 "SPU0_SECUREP179,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCD0++0x3 line.long 0x00 "SPU0_SECUREP180,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCD4++0x3 line.long 0x00 "SPU0_SECUREP181,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCD8++0x3 line.long 0x00 "SPU0_SECUREP182,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCDC++0x3 line.long 0x00 "SPU0_SECUREP183,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCE0++0x3 line.long 0x00 "SPU0_SECUREP184,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCE4++0x3 line.long 0x00 "SPU0_SECUREP185,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCE8++0x3 line.long 0x00 "SPU0_SECUREP186,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCEC++0x3 line.long 0x00 "SPU0_SECUREP187,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" group.long 0xCF0++0x3 line.long 0x00 "SPU0_SECUREP188,SPU0 Secure Peripheral Register" bitfld.long 0x00 1. " MSEC ,Master Secure Enable" "0,1" bitfld.long 0x00 0. " SSEC ,Slave Secure Enable" "0,1" tree.end tree "SWU (System Watchpoint Unit)" tree "SWU0" base ad:0x31015000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU0_GCTL,SWU0 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU0_GSTAT,SWU0 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU0_CTL0,SWU0 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU0_LA0,SWU0 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU0_UA0,SWU0 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU0_ID0,SWU0 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU0_CNT0,SWU0 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU0_TARG0,SWU0 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU0_HIST0,SWU0 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU0_CUR0,SWU0 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU0_CTL1,SWU0 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU0_LA1,SWU0 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU0_UA1,SWU0 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU0_ID1,SWU0 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU0_CNT1,SWU0 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU0_TARG1,SWU0 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU0_HIST1,SWU0 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU0_CUR1,SWU0 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU0_CTL2,SWU0 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU0_LA2,SWU0 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU0_UA2,SWU0 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU0_ID2,SWU0 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU0_CNT2,SWU0 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU0_TARG2,SWU0 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU0_HIST2,SWU0 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU0_CUR2,SWU0 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU0_CTL3,SWU0 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU0_LA3,SWU0 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU0_UA3,SWU0 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU0_ID3,SWU0 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU0_CNT3,SWU0 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU0_TARG3,SWU0 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU0_HIST3,SWU0 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU0_CUR3,SWU0 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU1" base ad:0x31091000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU1_GCTL,SWU1 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU1_GSTAT,SWU1 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU1_CTL0,SWU1 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU1_LA0,SWU1 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU1_UA0,SWU1 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU1_ID0,SWU1 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU1_CNT0,SWU1 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU1_TARG0,SWU1 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU1_HIST0,SWU1 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU1_CUR0,SWU1 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU1_CTL1,SWU1 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU1_LA1,SWU1 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU1_UA1,SWU1 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU1_ID1,SWU1 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU1_CNT1,SWU1 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU1_TARG1,SWU1 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU1_HIST1,SWU1 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU1_CUR1,SWU1 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU1_CTL2,SWU1 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU1_LA2,SWU1 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU1_UA2,SWU1 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU1_ID2,SWU1 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU1_CNT2,SWU1 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU1_TARG2,SWU1 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU1_HIST2,SWU1 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU1_CUR2,SWU1 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU1_CTL3,SWU1 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU1_LA3,SWU1 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU1_UA3,SWU1 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU1_ID3,SWU1 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU1_CNT3,SWU1 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU1_TARG3,SWU1 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU1_HIST3,SWU1 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU1_CUR3,SWU1 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU2" base ad:0x31092000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU2_GCTL,SWU2 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU2_GSTAT,SWU2 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU2_CTL0,SWU2 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU2_LA0,SWU2 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU2_UA0,SWU2 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU2_ID0,SWU2 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU2_CNT0,SWU2 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU2_TARG0,SWU2 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU2_HIST0,SWU2 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU2_CUR0,SWU2 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU2_CTL1,SWU2 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU2_LA1,SWU2 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU2_UA1,SWU2 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU2_ID1,SWU2 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU2_CNT1,SWU2 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU2_TARG1,SWU2 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU2_HIST1,SWU2 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU2_CUR1,SWU2 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU2_CTL2,SWU2 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU2_LA2,SWU2 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU2_UA2,SWU2 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU2_ID2,SWU2 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU2_CNT2,SWU2 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU2_TARG2,SWU2 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU2_HIST2,SWU2 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU2_CUR2,SWU2 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU2_CTL3,SWU2 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU2_LA3,SWU2 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU2_UA3,SWU2 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU2_ID3,SWU2 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU2_CNT3,SWU2 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU2_TARG3,SWU2 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU2_HIST3,SWU2 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU2_CUR3,SWU2 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU3" base ad:0x31093000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU3_GCTL,SWU3 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU3_GSTAT,SWU3 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU3_CTL0,SWU3 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU3_LA0,SWU3 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU3_UA0,SWU3 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU3_ID0,SWU3 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU3_CNT0,SWU3 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU3_TARG0,SWU3 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU3_HIST0,SWU3 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU3_CUR0,SWU3 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU3_CTL1,SWU3 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU3_LA1,SWU3 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU3_UA1,SWU3 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU3_ID1,SWU3 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU3_CNT1,SWU3 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU3_TARG1,SWU3 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU3_HIST1,SWU3 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU3_CUR1,SWU3 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU3_CTL2,SWU3 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU3_LA2,SWU3 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU3_UA2,SWU3 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU3_ID2,SWU3 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU3_CNT2,SWU3 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU3_TARG2,SWU3 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU3_HIST2,SWU3 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU3_CUR2,SWU3 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU3_CTL3,SWU3 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU3_LA3,SWU3 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU3_UA3,SWU3 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU3_ID3,SWU3 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU3_CNT3,SWU3 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU3_TARG3,SWU3 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU3_HIST3,SWU3 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU3_CUR3,SWU3 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU4" base ad:0x31094000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU4_GCTL,SWU4 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU4_GSTAT,SWU4 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU4_CTL0,SWU4 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU4_LA0,SWU4 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU4_UA0,SWU4 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU4_ID0,SWU4 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU4_CNT0,SWU4 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU4_TARG0,SWU4 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU4_HIST0,SWU4 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU4_CUR0,SWU4 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU4_CTL1,SWU4 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU4_LA1,SWU4 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU4_UA1,SWU4 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU4_ID1,SWU4 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU4_CNT1,SWU4 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU4_TARG1,SWU4 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU4_HIST1,SWU4 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU4_CUR1,SWU4 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU4_CTL2,SWU4 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU4_LA2,SWU4 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU4_UA2,SWU4 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU4_ID2,SWU4 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU4_CNT2,SWU4 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU4_TARG2,SWU4 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU4_HIST2,SWU4 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU4_CUR2,SWU4 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU4_CTL3,SWU4 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU4_LA3,SWU4 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU4_UA3,SWU4 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU4_ID3,SWU4 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU4_CNT3,SWU4 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU4_TARG3,SWU4 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU4_HIST3,SWU4 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU4_CUR3,SWU4 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU5" base ad:0x31095000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU5_GCTL,SWU5 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU5_GSTAT,SWU5 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU5_CTL0,SWU5 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU5_LA0,SWU5 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU5_UA0,SWU5 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU5_ID0,SWU5 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU5_CNT0,SWU5 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU5_TARG0,SWU5 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU5_HIST0,SWU5 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU5_CUR0,SWU5 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU5_CTL1,SWU5 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU5_LA1,SWU5 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU5_UA1,SWU5 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU5_ID1,SWU5 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU5_CNT1,SWU5 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU5_TARG1,SWU5 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU5_HIST1,SWU5 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU5_CUR1,SWU5 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU5_CTL2,SWU5 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU5_LA2,SWU5 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU5_UA2,SWU5 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU5_ID2,SWU5 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU5_CNT2,SWU5 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU5_TARG2,SWU5 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU5_HIST2,SWU5 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU5_CUR2,SWU5 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU5_CTL3,SWU5 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU5_LA3,SWU5 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU5_UA3,SWU5 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU5_ID3,SWU5 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU5_CNT3,SWU5 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU5_TARG3,SWU5 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU5_HIST3,SWU5 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU5_CUR3,SWU5 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU6" base ad:0x31096000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU6_GCTL,SWU6 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU6_GSTAT,SWU6 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU6_CTL0,SWU6 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU6_LA0,SWU6 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU6_UA0,SWU6 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU6_ID0,SWU6 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU6_CNT0,SWU6 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU6_TARG0,SWU6 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU6_HIST0,SWU6 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU6_CUR0,SWU6 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU6_CTL1,SWU6 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU6_LA1,SWU6 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU6_UA1,SWU6 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU6_ID1,SWU6 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU6_CNT1,SWU6 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU6_TARG1,SWU6 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU6_HIST1,SWU6 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU6_CUR1,SWU6 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU6_CTL2,SWU6 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU6_LA2,SWU6 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU6_UA2,SWU6 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU6_ID2,SWU6 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU6_CNT2,SWU6 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU6_TARG2,SWU6 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU6_HIST2,SWU6 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU6_CUR2,SWU6 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU6_CTL3,SWU6 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU6_LA3,SWU6 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU6_UA3,SWU6 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU6_ID3,SWU6 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU6_CNT3,SWU6 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU6_TARG3,SWU6 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU6_HIST3,SWU6 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU6_CUR3,SWU6 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU7" base ad:0x31140000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU7_GCTL,SWU7 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU7_GSTAT,SWU7 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU7_CTL0,SWU7 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU7_LA0,SWU7 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU7_UA0,SWU7 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU7_ID0,SWU7 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU7_CNT0,SWU7 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU7_TARG0,SWU7 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU7_HIST0,SWU7 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU7_CUR0,SWU7 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU7_CTL1,SWU7 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU7_LA1,SWU7 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU7_UA1,SWU7 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU7_ID1,SWU7 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU7_CNT1,SWU7 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU7_TARG1,SWU7 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU7_HIST1,SWU7 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU7_CUR1,SWU7 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU7_CTL2,SWU7 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU7_LA2,SWU7 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU7_UA2,SWU7 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU7_ID2,SWU7 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU7_CNT2,SWU7 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU7_TARG2,SWU7 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU7_HIST2,SWU7 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU7_CUR2,SWU7 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU7_CTL3,SWU7 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU7_LA3,SWU7 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU7_UA3,SWU7 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU7_ID3,SWU7 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU7_CNT3,SWU7 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU7_TARG3,SWU7 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU7_HIST3,SWU7 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU7_CUR3,SWU7 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU8" base ad:0x31141000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU8_GCTL,SWU8 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU8_GSTAT,SWU8 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU8_CTL0,SWU8 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU8_LA0,SWU8 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU8_UA0,SWU8 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU8_ID0,SWU8 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU8_CNT0,SWU8 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU8_TARG0,SWU8 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU8_HIST0,SWU8 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU8_CUR0,SWU8 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU8_CTL1,SWU8 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU8_LA1,SWU8 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU8_UA1,SWU8 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU8_ID1,SWU8 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU8_CNT1,SWU8 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU8_TARG1,SWU8 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU8_HIST1,SWU8 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU8_CUR1,SWU8 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU8_CTL2,SWU8 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU8_LA2,SWU8 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU8_UA2,SWU8 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU8_ID2,SWU8 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU8_CNT2,SWU8 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU8_TARG2,SWU8 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU8_HIST2,SWU8 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU8_CUR2,SWU8 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU8_CTL3,SWU8 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU8_LA3,SWU8 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU8_UA3,SWU8 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU8_ID3,SWU8 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU8_CNT3,SWU8 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU8_TARG3,SWU8 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU8_HIST3,SWU8 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU8_CUR3,SWU8 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU9" base ad:0x31142000 width 12. group.long 0x0++0x3 line.long 0x00 "SWU9_GCTL,SWU9 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU9_GSTAT,SWU9 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU9_CTL0,SWU9 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU9_LA0,SWU9 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU9_UA0,SWU9 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU9_ID0,SWU9 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU9_CNT0,SWU9 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU9_TARG0,SWU9 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU9_HIST0,SWU9 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU9_CUR0,SWU9 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU9_CTL1,SWU9 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU9_LA1,SWU9 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU9_UA1,SWU9 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU9_ID1,SWU9 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU9_CNT1,SWU9 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU9_TARG1,SWU9 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU9_HIST1,SWU9 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU9_CUR1,SWU9 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU9_CTL2,SWU9 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU9_LA2,SWU9 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU9_UA2,SWU9 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU9_ID2,SWU9 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU9_CNT2,SWU9 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU9_TARG2,SWU9 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU9_HIST2,SWU9 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU9_CUR2,SWU9 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU9_CTL3,SWU9 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU9_LA3,SWU9 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU9_UA3,SWU9 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU9_ID3,SWU9 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU9_CNT3,SWU9 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU9_TARG3,SWU9 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU9_HIST3,SWU9 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU9_CUR3,SWU9 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU10" base ad:0x31143000 width 13. group.long 0x0++0x3 line.long 0x00 "SWU10_GCTL,SWU10 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU10_GSTAT,SWU10 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU10_CTL0,SWU10 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU10_LA0,SWU10 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU10_UA0,SWU10 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU10_ID0,SWU10 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU10_CNT0,SWU10 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU10_TARG0,SWU10 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU10_HIST0,SWU10 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU10_CUR0,SWU10 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU10_CTL1,SWU10 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU10_LA1,SWU10 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU10_UA1,SWU10 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU10_ID1,SWU10 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU10_CNT1,SWU10 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU10_TARG1,SWU10 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU10_HIST1,SWU10 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU10_CUR1,SWU10 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU10_CTL2,SWU10 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU10_LA2,SWU10 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU10_UA2,SWU10 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU10_ID2,SWU10 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU10_CNT2,SWU10 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU10_TARG2,SWU10 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU10_HIST2,SWU10 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU10_CUR2,SWU10 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU10_CTL3,SWU10 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU10_LA3,SWU10 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU10_UA3,SWU10 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU10_ID3,SWU10 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU10_CNT3,SWU10 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU10_TARG3,SWU10 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU10_HIST3,SWU10 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU10_CUR3,SWU10 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU11" base ad:0x31097000 width 13. group.long 0x0++0x3 line.long 0x00 "SWU11_GCTL,SWU11 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU11_GSTAT,SWU11 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU11_CTL0,SWU11 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU11_LA0,SWU11 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU11_UA0,SWU11 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU11_ID0,SWU11 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU11_CNT0,SWU11 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU11_TARG0,SWU11 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU11_HIST0,SWU11 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU11_CUR0,SWU11 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU11_CTL1,SWU11 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU11_LA1,SWU11 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU11_UA1,SWU11 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU11_ID1,SWU11 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU11_CNT1,SWU11 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU11_TARG1,SWU11 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU11_HIST1,SWU11 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU11_CUR1,SWU11 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU11_CTL2,SWU11 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU11_LA2,SWU11 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU11_UA2,SWU11 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU11_ID2,SWU11 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU11_CNT2,SWU11 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU11_TARG2,SWU11 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU11_HIST2,SWU11 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU11_CUR2,SWU11 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU11_CTL3,SWU11 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU11_LA3,SWU11 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU11_UA3,SWU11 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU11_ID3,SWU11 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU11_CNT3,SWU11 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU11_TARG3,SWU11 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU11_HIST3,SWU11 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU11_CUR3,SWU11 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU12" base ad:0x31041000 width 13. group.long 0x0++0x3 line.long 0x00 "SWU12_GCTL,SWU12 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU12_GSTAT,SWU12 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU12_CTL0,SWU12 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU12_LA0,SWU12 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU12_UA0,SWU12 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU12_ID0,SWU12 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU12_CNT0,SWU12 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU12_TARG0,SWU12 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU12_HIST0,SWU12 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU12_CUR0,SWU12 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU12_CTL1,SWU12 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU12_LA1,SWU12 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU12_UA1,SWU12 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU12_ID1,SWU12 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU12_CNT1,SWU12 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU12_TARG1,SWU12 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU12_HIST1,SWU12 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU12_CUR1,SWU12 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU12_CTL2,SWU12 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU12_LA2,SWU12 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU12_UA2,SWU12 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU12_ID2,SWU12 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU12_CNT2,SWU12 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU12_TARG2,SWU12 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU12_HIST2,SWU12 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU12_CUR2,SWU12 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU12_CTL3,SWU12 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU12_LA3,SWU12 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU12_UA3,SWU12 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU12_ID3,SWU12 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU12_CNT3,SWU12 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU12_TARG3,SWU12 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU12_HIST3,SWU12 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU12_CUR3,SWU12 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU13" base ad:0x3109E000 width 13. group.long 0x0++0x3 line.long 0x00 "SWU13_GCTL,SWU13 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU13_GSTAT,SWU13 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU13_CTL0,SWU13 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU13_LA0,SWU13 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU13_UA0,SWU13 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU13_ID0,SWU13 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU13_CNT0,SWU13 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU13_TARG0,SWU13 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU13_HIST0,SWU13 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU13_CUR0,SWU13 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU13_CTL1,SWU13 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU13_LA1,SWU13 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU13_UA1,SWU13 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU13_ID1,SWU13 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU13_CNT1,SWU13 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU13_TARG1,SWU13 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU13_HIST1,SWU13 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU13_CUR1,SWU13 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU13_CTL2,SWU13 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU13_LA2,SWU13 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU13_UA2,SWU13 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU13_ID2,SWU13 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU13_CNT2,SWU13 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU13_TARG2,SWU13 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU13_HIST2,SWU13 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU13_CUR2,SWU13 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU13_CTL3,SWU13 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU13_LA3,SWU13 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU13_UA3,SWU13 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU13_ID3,SWU13 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU13_CNT3,SWU13 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU13_TARG3,SWU13 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU13_HIST3,SWU13 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU13_CUR3,SWU13 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU14" base ad:0x3109F000 width 13. group.long 0x0++0x3 line.long 0x00 "SWU14_GCTL,SWU14 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU14_GSTAT,SWU14 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU14_CTL0,SWU14 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU14_LA0,SWU14 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU14_UA0,SWU14 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU14_ID0,SWU14 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU14_CNT0,SWU14 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU14_TARG0,SWU14 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU14_HIST0,SWU14 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU14_CUR0,SWU14 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU14_CTL1,SWU14 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU14_LA1,SWU14 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU14_UA1,SWU14 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU14_ID1,SWU14 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU14_CNT1,SWU14 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU14_TARG1,SWU14 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU14_HIST1,SWU14 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU14_CUR1,SWU14 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU14_CTL2,SWU14 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU14_LA2,SWU14 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU14_UA2,SWU14 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU14_ID2,SWU14 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU14_CNT2,SWU14 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU14_TARG2,SWU14 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU14_HIST2,SWU14 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU14_CUR2,SWU14 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU14_CTL3,SWU14 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU14_LA3,SWU14 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU14_UA3,SWU14 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU14_ID3,SWU14 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU14_CNT3,SWU14 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU14_TARG3,SWU14 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU14_HIST3,SWU14 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU14_CUR3,SWU14 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree "SWU15" base ad:0x31098000 width 13. group.long 0x0++0x3 line.long 0x00 "SWU15_GCTL,SWU15 Global Control Register" bitfld.long 0x00 1. " RST ,Global Reset" "0,1" bitfld.long 0x00 0. " EN ,Global Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "SWU15_GSTAT,SWU15 Global Status Register" bitfld.long 0x00 30. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 15. " OVRBW3 ,Group 3 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 14. " UNDRBW3 ,Group 3 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 13. " OVRBW2 ,Group 2 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 12. " UNDRBW2 ,Group 2 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 11. " OVRBW1 ,Group 1 Bandwidth Above Maximum Target" "0,1" bitfld.long 0x00 10. " UNDRBW1 ,Group 1 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 9. " OVRBW0 ,Group 0 Bandwidth Above Maximum Target" "0,1" newline bitfld.long 0x00 8. " UNDRBW0 ,Group 0 Bandwidth Below Minimum Target" "0,1" bitfld.long 0x00 7. " INT3 ,Group 3 Interrupt Status" "0,1" bitfld.long 0x00 6. " INT2 ,Group 2 Interrupt Status" "0,1" bitfld.long 0x00 5. " INT1 ,Group 1 Interrupt Status" "0,1" newline bitfld.long 0x00 4. " INT0 ,Group 0 Interrupt Status" "0,1" bitfld.long 0x00 3. " MTCH3 ,Group 3 Match" "0,1" bitfld.long 0x00 2. " MTCH2 ,Group 2 Match" "0,1" bitfld.long 0x00 1. " MTCH1 ,Group 1 Match" "0,1" newline bitfld.long 0x00 0. " MTCH0 ,Group 0 Match" "0,1" group.long 0x10++0x3 line.long 0x00 "SWU15_CTL0,SWU15 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x14++0x3 line.long 0x00 "SWU15_LA0,SWU15 Lower Address Register n" group.long 0x18++0x3 line.long 0x00 "SWU15_UA0,SWU15 Upper Address Register n" group.long 0x1C++0x3 line.long 0x00 "SWU15_ID0,SWU15 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x20++0x3 line.long 0x00 "SWU15_CNT0,SWU15 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x24++0x3 line.long 0x00 "SWU15_TARG0,SWU15 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x28++0x3 line.long 0x00 "SWU15_HIST0,SWU15 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x2C++0x3 line.long 0x00 "SWU15_CUR0,SWU15 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x30++0x3 line.long 0x00 "SWU15_CTL1,SWU15 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x34++0x3 line.long 0x00 "SWU15_LA1,SWU15 Lower Address Register n" group.long 0x38++0x3 line.long 0x00 "SWU15_UA1,SWU15 Upper Address Register n" group.long 0x3C++0x3 line.long 0x00 "SWU15_ID1,SWU15 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x40++0x3 line.long 0x00 "SWU15_CNT1,SWU15 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x44++0x3 line.long 0x00 "SWU15_TARG1,SWU15 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x48++0x3 line.long 0x00 "SWU15_HIST1,SWU15 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x4C++0x3 line.long 0x00 "SWU15_CUR1,SWU15 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x50++0x3 line.long 0x00 "SWU15_CTL2,SWU15 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x54++0x3 line.long 0x00 "SWU15_LA2,SWU15 Lower Address Register n" group.long 0x58++0x3 line.long 0x00 "SWU15_UA2,SWU15 Upper Address Register n" group.long 0x5C++0x3 line.long 0x00 "SWU15_ID2,SWU15 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x60++0x3 line.long 0x00 "SWU15_CNT2,SWU15 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x64++0x3 line.long 0x00 "SWU15_TARG2,SWU15 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x68++0x3 line.long 0x00 "SWU15_HIST2,SWU15 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x6C++0x3 line.long 0x00 "SWU15_CUR2,SWU15 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" group.long 0x70++0x3 line.long 0x00 "SWU15_CTL3,SWU15 Control Register n" bitfld.long 0x00 24. " DATACNTMODE ,Data Channel Monitor" "0,1" bitfld.long 0x00 21.--23. " SCALE ,Scale the number of transactions" "0,1,2,3,4,5,6,7" bitfld.long 0x00 20. " STALLCNTMODE ,Stall Count Mode" "0,1" bitfld.long 0x00 19. " MAXACT ,Action for Bandwidth Above Maximum" "0,1" newline bitfld.long 0x00 18. " MINACT ,Action for Bandwidth Below Minimum" "0,1" bitfld.long 0x00 17. " BLENINC ,Increment Bandwidth Count by Burst Length" "0,1" bitfld.long 0x00 16. " BWEN ,Bandwidth Mode Enable" "0,1" bitfld.long 0x00 14. " TRGEN ,Trigger Enable" "0,1" newline bitfld.long 0x00 13. " INTEN ,Interrupt Enable" "0,1" bitfld.long 0x00 12. " DBGEN ,Debug Event Enable" "0,1" bitfld.long 0x00 9. " CNTRPTEN ,Count Repeat Enable" "0,1" bitfld.long 0x00 8. " CNTEN ,Count Enable" "0,1" newline bitfld.long 0x00 5. " SCMPEN ,Secure Comparison Enable" "0,1" bitfld.long 0x00 4. " IDCMPEN ,ID Comparison Enable" "0,1" bitfld.long 0x00 2.--3. " ACMPM ,Address Comparison Mode" "0,1,2,3" bitfld.long 0x00 1. " DIR ,Transaction Direction for Match" "0,1" newline bitfld.long 0x00 0. " EN ,Enable Watchpoint" "0,1" group.long 0x74++0x3 line.long 0x00 "SWU15_LA3,SWU15 Lower Address Register n" group.long 0x78++0x3 line.long 0x00 "SWU15_UA3,SWU15 Upper Address Register n" group.long 0x7C++0x3 line.long 0x00 "SWU15_ID3,SWU15 ID Register n" hexmask.long.word 0x00 16.--31. 1. " IDMASK ,Identity Mask (for Or with ID)" hexmask.long.word 0x00 0.--15. 1. " ID ,Identity" group.long 0x80++0x3 line.long 0x00 "SWU15_CNT3,SWU15 Count Register n" hexmask.long.word 0x00 0.--15. 1. " COUNT ,Count" group.long 0x84++0x3 line.long 0x00 "SWU15_TARG3,SWU15 Target Register n" hexmask.long.word 0x00 16.--31. 1. " BWMAX ,Maximum Bandwidth Target" hexmask.long.word 0x00 0.--15. 1. " BWMIN ,Minimum Bandwidth Target" group.long 0x88++0x3 line.long 0x00 "SWU15_HIST3,SWU15 Bandwidth History Register n" hexmask.long.word 0x00 16.--31. 1. " BWHIST1 ,Bandwidth from Window Before Last" hexmask.long.word 0x00 0.--15. 1. " BWHIST0 ,Bandwidth from Last Window" group.long 0x8C++0x3 line.long 0x00 "SWU15_CUR3,SWU15 Current Register n" hexmask.long.word 0x00 16.--31. 1. " CURBW ,Current Bandwidth" hexmask.long.word 0x00 0.--15. 1. " CURCNT ,Current Count" tree.end tree.end tree "TAPC (Test Access Port Controller)" base ad:0x31130000 width 19. group.long 0x0++0x3 line.long 0x00 "TAPC_IDCODE,TAPC IDCODE Register" bitfld.long 0x00 28.--31. " REVID ,Silicon Revision" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.word 0x00 12.--27. 1. " JTAGID ,JTAG ID" hexmask.long.word 0x00 1.--11. 1. " MNFID ,Manufacturer ID" bitfld.long 0x00 0. " LSB ,IDCODE LSB" "0,1" group.long 0x4++0x3 line.long 0x00 "TAPC_USERCODE,TAPC USERCODE Register" group.long 0x8++0x3 line.long 0x00 "TAPC_SDBGKEY_CTL,TAPC Secure Debug Key Control Register" bitfld.long 0x00 0. " VALID ,SDBGKEY Valid bit" "0,1" group.long 0xC++0x3 line.long 0x00 "TAPC_SDBGKEY_STAT,TAPC Secure Debug Key Status Register" bitfld.long 0x00 1. " FAIL ,SDBGKEY MATCH FAILED" "0,1" bitfld.long 0x00 0. " PASS ,SDBGKEY MATCH PASSED" "0,1" group.long 0x10++0x3 line.long 0x00 "TAPC_SDBGKEY0,TAPC Secure Debug Key 0 Register" group.long 0x14++0x3 line.long 0x00 "TAPC_SDBGKEY1,TAPC Secure Debug Key 1 Register" group.long 0x18++0x3 line.long 0x00 "TAPC_SDBGKEY2,TAPC Secure Debug Key 2 Register" group.long 0x1C++0x3 line.long 0x00 "TAPC_SDBGKEY3,TAPC Secure Debug Key 3 Register" group.long 0x1000++0x3 line.long 0x00 "TAPC_DBGCTL,TAPC Debug Control Register" bitfld.long 0x00 15. " SPIDENTRACE ,SPIDEN for Coresight trace modules" "0,1" bitfld.long 0x00 14. " NIDENTRACE ,NIDEN for Coresight trace modules" "0,1" bitfld.long 0x00 13. " DBGENTRACE ,DBGEN for Coresight trace modules" "0,1" bitfld.long 0x00 12. " NIDENCTISYS ,NIDEN for System CTI" "0,1" newline bitfld.long 0x00 11. " DBGENCTISYS ,DBGEN for System CTI" "0,1" bitfld.long 0x00 10. " SPIDENSTM ,SPIDEN for STM" "0,1" bitfld.long 0x00 9. " SPNIDENSTM ,SPNIDEN for STM" "0,1" bitfld.long 0x00 8. " NIDENSTM ,NIDEN for STM" "0,1" newline bitfld.long 0x00 7. " DBGENSTM ,DBGEN for STM" "0,1" bitfld.long 0x00 6. " DBGENC2 ,DBGEN for Core 2" "0,1" bitfld.long 0x00 5. " DBGENC1 ,DBGEN for Core 1" "0,1" bitfld.long 0x00 4. " SPIDENC0 ,SPIDEN for Core 0" "0,1" newline bitfld.long 0x00 3. " SPNIDENC0 ,SPNIDEN for Core 0" "0,1" bitfld.long 0x00 2. " NIDENC0 ,NIDEN for Core 0" "0,1" bitfld.long 0x00 1. " DBGENC0 ,DBGEN for Core 0" "0,1" bitfld.long 0x00 0. " SPIDENDAP ,SPIDEN for DAP" "0,1" tree.end tree "TIMER (General-Purpose Timer)" base ad:0x31001004 width 21. group.word 0x0++0x1 line.word 0x00 "TIMER0_RUN,TIMER0 Run Register" bitfld.word 0x00 7. " TMR07 ,Start/Stop Timer n" "0,1" bitfld.word 0x00 6. " TMR06 ,Start/Stop Timer n" "0,1" bitfld.word 0x00 5. " TMR05 ,Start/Stop Timer n" "0,1" bitfld.word 0x00 4. " TMR04 ,Start/Stop Timer n" "0,1" newline bitfld.word 0x00 3. " TMR03 ,Start/Stop Timer n" "0,1" bitfld.word 0x00 2. " TMR02 ,Start/Stop Timer n" "0,1" bitfld.word 0x00 1. " TMR01 ,Start/Stop Timer n" "0,1" bitfld.word 0x00 0. " TMR00 ,Start/Stop Timer n" "0,1" group.word 0x4++0x1 line.word 0x00 "TIMER0_RUN_SET,TIMER0 Run Set Register" bitfld.word 0x00 7. " TMR07 ,RUN Set Alias" "0,1" bitfld.word 0x00 6. " TMR06 ,RUN Set Alias" "0,1" bitfld.word 0x00 5. " TMR05 ,RUN Set Alias" "0,1" bitfld.word 0x00 4. " TMR04 ,RUN Set Alias" "0,1" newline bitfld.word 0x00 3. " TMR03 ,RUN Set Alias" "0,1" bitfld.word 0x00 2. " TMR02 ,RUN Set Alias" "0,1" bitfld.word 0x00 1. " TMR01 ,RUN Set Alias" "0,1" bitfld.word 0x00 0. " TMR00 ,RUN Set Alias" "0,1" group.word 0x8++0x1 line.word 0x00 "TIMER0_RUN_CLR,TIMER0 Run Clear Register" bitfld.word 0x00 7. " TMR07 ,RUN Clear Alias" "0,1" bitfld.word 0x00 6. " TMR06 ,RUN Clear Alias" "0,1" bitfld.word 0x00 5. " TMR05 ,RUN Clear Alias" "0,1" bitfld.word 0x00 4. " TMR04 ,RUN Clear Alias" "0,1" newline bitfld.word 0x00 3. " TMR03 ,RUN Clear Alias" "0,1" bitfld.word 0x00 2. " TMR02 ,RUN Clear Alias" "0,1" bitfld.word 0x00 1. " TMR01 ,RUN Clear Alias" "0,1" bitfld.word 0x00 0. " TMR00 ,RUN Clear Alias" "0,1" group.word 0xC++0x1 line.word 0x00 "TIMER0_STOP_CFG,TIMER0 Stop Configuration Register" bitfld.word 0x00 7. " TMR07 ,Stop Mode Select" "0,1" bitfld.word 0x00 6. " TMR06 ,Stop Mode Select" "0,1" bitfld.word 0x00 5. " TMR05 ,Stop Mode Select" "0,1" bitfld.word 0x00 4. " TMR04 ,Stop Mode Select" "0,1" newline bitfld.word 0x00 3. " TMR03 ,Stop Mode Select" "0,1" bitfld.word 0x00 2. " TMR02 ,Stop Mode Select" "0,1" bitfld.word 0x00 1. " TMR01 ,Stop Mode Select" "0,1" bitfld.word 0x00 0. " TMR00 ,Stop Mode Select" "0,1" group.word 0x10++0x1 line.word 0x00 "TIMER0_STOP_CFG_SET,TIMER0 Stop Configuration Set Register" bitfld.word 0x00 7. " TMR07 ,STOP_CFG Set Alias" "0,1" bitfld.word 0x00 6. " TMR06 ,STOP_CFG Set Alias" "0,1" bitfld.word 0x00 5. " TMR05 ,STOP_CFG Set Alias" "0,1" bitfld.word 0x00 4. " TMR04 ,STOP_CFG Set Alias" "0,1" newline bitfld.word 0x00 3. " TMR03 ,STOP_CFG Set Alias" "0,1" bitfld.word 0x00 2. " TMR02 ,STOP_CFG Set Alias" "0,1" bitfld.word 0x00 1. " TMR01 ,STOP_CFG Set Alias" "0,1" bitfld.word 0x00 0. " TMR00 ,STOP_CFG Set Alias" "0,1" group.word 0x14++0x1 line.word 0x00 "TIMER0_STOP_CFG_CLR,TIMER0 Stop Configuration Clear Register" bitfld.word 0x00 7. " TMR07 ,STOP_CFG Clear Alias" "0,1" bitfld.word 0x00 6. " TMR06 ,STOP_CFG Clear Alias" "0,1" bitfld.word 0x00 5. " TMR05 ,STOP_CFG Clear Alias" "0,1" bitfld.word 0x00 4. " TMR04 ,STOP_CFG Clear Alias" "0,1" newline bitfld.word 0x00 3. " TMR03 ,STOP_CFG Clear Alias" "0,1" bitfld.word 0x00 2. " TMR02 ,STOP_CFG Clear Alias" "0,1" bitfld.word 0x00 1. " TMR01 ,STOP_CFG Clear Alias" "0,1" bitfld.word 0x00 0. " TMR00 ,STOP_CFG Clear Alias" "0,1" group.word 0x18++0x1 line.word 0x00 "TIMER0_DATA_IMSK,TIMER0 Data Interrupt Mask Register" bitfld.word 0x00 7. " TMR07 ,Data Interrupt Mask" "0,1" bitfld.word 0x00 6. " TMR06 ,Data Interrupt Mask" "0,1" bitfld.word 0x00 5. " TMR05 ,Data Interrupt Mask" "0,1" bitfld.word 0x00 4. " TMR04 ,Data Interrupt Mask" "0,1" newline bitfld.word 0x00 3. " TMR03 ,Data Interrupt Mask" "0,1" bitfld.word 0x00 2. " TMR02 ,Data Interrupt Mask" "0,1" bitfld.word 0x00 1. " TMR01 ,Data Interrupt Mask" "0,1" bitfld.word 0x00 0. " TMR00 ,Data Interrupt Mask" "0,1" group.word 0x1C++0x1 line.word 0x00 "TIMER0_STAT_IMSK,TIMER0 Status Interrupt Mask Register" bitfld.word 0x00 7. " TMR07 ,Status Interrupt Mask" "0,1" bitfld.word 0x00 6. " TMR06 ,Status Interrupt Mask" "0,1" bitfld.word 0x00 5. " TMR05 ,Status Interrupt Mask" "0,1" bitfld.word 0x00 4. " TMR04 ,Status Interrupt Mask" "0,1" newline bitfld.word 0x00 3. " TMR03 ,Status Interrupt Mask" "0,1" bitfld.word 0x00 2. " TMR02 ,Status Interrupt Mask" "0,1" bitfld.word 0x00 1. " TMR01 ,Status Interrupt Mask" "0,1" bitfld.word 0x00 0. " TMR00 ,Status Interrupt Mask" "0,1" group.word 0x20++0x1 line.word 0x00 "TIMER0_TRG_MSK,TIMER0 Trigger Master Mask Register" bitfld.word 0x00 7. " TMR07 ,Trigger Output Mask" "0,1" bitfld.word 0x00 6. " TMR06 ,Trigger Output Mask" "0,1" bitfld.word 0x00 5. " TMR05 ,Trigger Output Mask" "0,1" bitfld.word 0x00 4. " TMR04 ,Trigger Output Mask" "0,1" newline bitfld.word 0x00 3. " TMR03 ,Trigger Output Mask" "0,1" bitfld.word 0x00 2. " TMR02 ,Trigger Output Mask" "0,1" bitfld.word 0x00 1. " TMR01 ,Trigger Output Mask" "0,1" bitfld.word 0x00 0. " TMR00 ,Trigger Output Mask" "0,1" group.word 0x24++0x1 line.word 0x00 "TIMER0_TRG_IE,TIMER0 Trigger Slave Enable Register" bitfld.word 0x00 7. " TMR07 ,Trigger Input Enable" "0,1" bitfld.word 0x00 6. " TMR06 ,Trigger Input Enable" "0,1" bitfld.word 0x00 5. " TMR05 ,Trigger Input Enable" "0,1" bitfld.word 0x00 4. " TMR04 ,Trigger Input Enable" "0,1" newline bitfld.word 0x00 3. " TMR03 ,Trigger Input Enable" "0,1" bitfld.word 0x00 2. " TMR02 ,Trigger Input Enable" "0,1" bitfld.word 0x00 1. " TMR01 ,Trigger Input Enable" "0,1" bitfld.word 0x00 0. " TMR00 ,Trigger Input Enable" "0,1" group.word 0x28++0x1 line.word 0x00 "TIMER0_DATA_ILAT,TIMER0 Data Interrupt Latch Register" bitfld.word 0x00 7. " TMR07 ,Data Interrupt Latch" "0,1" bitfld.word 0x00 6. " TMR06 ,Data Interrupt Latch" "0,1" bitfld.word 0x00 5. " TMR05 ,Data Interrupt Latch" "0,1" bitfld.word 0x00 4. " TMR04 ,Data Interrupt Latch" "0,1" newline bitfld.word 0x00 3. " TMR03 ,Data Interrupt Latch" "0,1" bitfld.word 0x00 2. " TMR02 ,Data Interrupt Latch" "0,1" bitfld.word 0x00 1. " TMR01 ,Data Interrupt Latch" "0,1" bitfld.word 0x00 0. " TMR00 ,Data Interrupt Latch" "0,1" group.word 0x2C++0x1 line.word 0x00 "TIMER0_STAT_ILAT,TIMER0 Status Interrupt Latch Register" bitfld.word 0x00 7. " TMR07 ,Status Interrupt Latch" "0,1" bitfld.word 0x00 6. " TMR06 ,Status Interrupt Latch" "0,1" bitfld.word 0x00 5. " TMR05 ,Status Interrupt Latch" "0,1" bitfld.word 0x00 4. " TMR04 ,Status Interrupt Latch" "0,1" newline bitfld.word 0x00 3. " TMR03 ,Status Interrupt Latch" "0,1" bitfld.word 0x00 2. " TMR02 ,Status Interrupt Latch" "0,1" bitfld.word 0x00 1. " TMR01 ,Status Interrupt Latch" "0,1" bitfld.word 0x00 0. " TMR00 ,Status Interrupt Latch" "0,1" group.long 0x30++0x3 line.long 0x00 "TIMER0_ERR_TYPE,TIMER0 Error Type Status Register" bitfld.long 0x00 14.--15. " TERR7 ,Error Type for Timer 7" "0,1,2,3" bitfld.long 0x00 12.--13. " TERR6 ,Error Type for Timer 6" "0,1,2,3" bitfld.long 0x00 10.--11. " TERR5 ,Error Type for Timer 5" "0,1,2,3" bitfld.long 0x00 8.--9. " TERR4 ,Error Type for Timer 4" "0,1,2,3" newline bitfld.long 0x00 6.--7. " TERR3 ,Error Type for Timer 3" "0,1,2,3" bitfld.long 0x00 4.--5. " TERR2 ,Error Type for Timer 2" "0,1,2,3" bitfld.long 0x00 2.--3. " TERR1 ,Error Type for Timer 1" "0,1,2,3" bitfld.long 0x00 0.--1. " TERR0 ,Error Type for Timer 0" "0,1,2,3" group.long 0x34++0x3 line.long 0x00 "TIMER0_BCAST_PER,TIMER0 Broadcast Period Register" group.long 0x38++0x3 line.long 0x00 "TIMER0_BCAST_WID,TIMER0 Broadcast Width Register" group.long 0x3C++0x3 line.long 0x00 "TIMER0_BCAST_DLY,TIMER0 Broadcast Delay Register" group.word 0x5C++0x1 line.word 0x00 "TIMER0_TMR0_CFG,TIMER0 Timer n Configuration Register" bitfld.word 0x00 15. " EMURUN ,Emulation Run" "0,1" bitfld.word 0x00 14. " BPEREN ,Broadcast Period Enable" "0,1" bitfld.word 0x00 13. " BWIDEN ,Broadcast Width Enable" "0,1" bitfld.word 0x00 12. " BDLYEN ,Broadcast Delay Enable" "0,1" newline bitfld.word 0x00 11. " OUTDIS ,Output Disable" "0,1" bitfld.word 0x00 10. " TINSEL ,Timer Input Select (for WIDCAP, WATCHDOG, PININT, EXTCLK modes)" "0,1" bitfld.word 0x00 8.--9. " CLKSEL ,Clock Select" "0,1,2,3" bitfld.word 0x00 7. " PULSEHI ,Polarity Response Select" "0,1" newline bitfld.word 0x00 6. " SLAVETRIG ,Slave Trigger Response." "0,1" bitfld.word 0x00 4.--5. " IRQMODE ,Interrupt Modes" "0,1,2,3" bitfld.word 0x00 0.--3. " TMODE ,Timer Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x60++0x3 line.long 0x00 "TIMER0_TMR0_CNT,TIMER0 Timer n Counter Register" group.long 0x64++0x3 line.long 0x00 "TIMER0_TMR0_PER,TIMER0 Timer n Period Register" group.long 0x68++0x3 line.long 0x00 "TIMER0_TMR0_WID,TIMER0 Timer n Width Register" group.long 0x6C++0x3 line.long 0x00 "TIMER0_TMR0_DLY,TIMER0 Timer n Delay Register" group.word 0x7C++0x1 line.word 0x00 "TIMER0_TMR1_CFG,TIMER0 Timer n Configuration Register" bitfld.word 0x00 15. " EMURUN ,Emulation Run" "0,1" bitfld.word 0x00 14. " BPEREN ,Broadcast Period Enable" "0,1" bitfld.word 0x00 13. " BWIDEN ,Broadcast Width Enable" "0,1" bitfld.word 0x00 12. " BDLYEN ,Broadcast Delay Enable" "0,1" newline bitfld.word 0x00 11. " OUTDIS ,Output Disable" "0,1" bitfld.word 0x00 10. " TINSEL ,Timer Input Select (for WIDCAP, WATCHDOG, PININT, EXTCLK modes)" "0,1" bitfld.word 0x00 8.--9. " CLKSEL ,Clock Select" "0,1,2,3" bitfld.word 0x00 7. " PULSEHI ,Polarity Response Select" "0,1" newline bitfld.word 0x00 6. " SLAVETRIG ,Slave Trigger Response." "0,1" bitfld.word 0x00 4.--5. " IRQMODE ,Interrupt Modes" "0,1,2,3" bitfld.word 0x00 0.--3. " TMODE ,Timer Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x80++0x3 line.long 0x00 "TIMER0_TMR1_CNT,TIMER0 Timer n Counter Register" group.long 0x84++0x3 line.long 0x00 "TIMER0_TMR1_PER,TIMER0 Timer n Period Register" group.long 0x88++0x3 line.long 0x00 "TIMER0_TMR1_WID,TIMER0 Timer n Width Register" group.long 0x8C++0x3 line.long 0x00 "TIMER0_TMR1_DLY,TIMER0 Timer n Delay Register" group.word 0x9C++0x1 line.word 0x00 "TIMER0_TMR2_CFG,TIMER0 Timer n Configuration Register" bitfld.word 0x00 15. " EMURUN ,Emulation Run" "0,1" bitfld.word 0x00 14. " BPEREN ,Broadcast Period Enable" "0,1" bitfld.word 0x00 13. " BWIDEN ,Broadcast Width Enable" "0,1" bitfld.word 0x00 12. " BDLYEN ,Broadcast Delay Enable" "0,1" newline bitfld.word 0x00 11. " OUTDIS ,Output Disable" "0,1" bitfld.word 0x00 10. " TINSEL ,Timer Input Select (for WIDCAP, WATCHDOG, PININT, EXTCLK modes)" "0,1" bitfld.word 0x00 8.--9. " CLKSEL ,Clock Select" "0,1,2,3" bitfld.word 0x00 7. " PULSEHI ,Polarity Response Select" "0,1" newline bitfld.word 0x00 6. " SLAVETRIG ,Slave Trigger Response." "0,1" bitfld.word 0x00 4.--5. " IRQMODE ,Interrupt Modes" "0,1,2,3" bitfld.word 0x00 0.--3. " TMODE ,Timer Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xA0++0x3 line.long 0x00 "TIMER0_TMR2_CNT,TIMER0 Timer n Counter Register" group.long 0xA4++0x3 line.long 0x00 "TIMER0_TMR2_PER,TIMER0 Timer n Period Register" group.long 0xA8++0x3 line.long 0x00 "TIMER0_TMR2_WID,TIMER0 Timer n Width Register" group.long 0xAC++0x3 line.long 0x00 "TIMER0_TMR2_DLY,TIMER0 Timer n Delay Register" group.word 0xBC++0x1 line.word 0x00 "TIMER0_TMR3_CFG,TIMER0 Timer n Configuration Register" bitfld.word 0x00 15. " EMURUN ,Emulation Run" "0,1" bitfld.word 0x00 14. " BPEREN ,Broadcast Period Enable" "0,1" bitfld.word 0x00 13. " BWIDEN ,Broadcast Width Enable" "0,1" bitfld.word 0x00 12. " BDLYEN ,Broadcast Delay Enable" "0,1" newline bitfld.word 0x00 11. " OUTDIS ,Output Disable" "0,1" bitfld.word 0x00 10. " TINSEL ,Timer Input Select (for WIDCAP, WATCHDOG, PININT, EXTCLK modes)" "0,1" bitfld.word 0x00 8.--9. " CLKSEL ,Clock Select" "0,1,2,3" bitfld.word 0x00 7. " PULSEHI ,Polarity Response Select" "0,1" newline bitfld.word 0x00 6. " SLAVETRIG ,Slave Trigger Response." "0,1" bitfld.word 0x00 4.--5. " IRQMODE ,Interrupt Modes" "0,1,2,3" bitfld.word 0x00 0.--3. " TMODE ,Timer Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xC0++0x3 line.long 0x00 "TIMER0_TMR3_CNT,TIMER0 Timer n Counter Register" group.long 0xC4++0x3 line.long 0x00 "TIMER0_TMR3_PER,TIMER0 Timer n Period Register" group.long 0xC8++0x3 line.long 0x00 "TIMER0_TMR3_WID,TIMER0 Timer n Width Register" group.long 0xCC++0x3 line.long 0x00 "TIMER0_TMR3_DLY,TIMER0 Timer n Delay Register" group.word 0xDC++0x1 line.word 0x00 "TIMER0_TMR4_CFG,TIMER0 Timer n Configuration Register" bitfld.word 0x00 15. " EMURUN ,Emulation Run" "0,1" bitfld.word 0x00 14. " BPEREN ,Broadcast Period Enable" "0,1" bitfld.word 0x00 13. " BWIDEN ,Broadcast Width Enable" "0,1" bitfld.word 0x00 12. " BDLYEN ,Broadcast Delay Enable" "0,1" newline bitfld.word 0x00 11. " OUTDIS ,Output Disable" "0,1" bitfld.word 0x00 10. " TINSEL ,Timer Input Select (for WIDCAP, WATCHDOG, PININT, EXTCLK modes)" "0,1" bitfld.word 0x00 8.--9. " CLKSEL ,Clock Select" "0,1,2,3" bitfld.word 0x00 7. " PULSEHI ,Polarity Response Select" "0,1" newline bitfld.word 0x00 6. " SLAVETRIG ,Slave Trigger Response." "0,1" bitfld.word 0x00 4.--5. " IRQMODE ,Interrupt Modes" "0,1,2,3" bitfld.word 0x00 0.--3. " TMODE ,Timer Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0xE0++0x3 line.long 0x00 "TIMER0_TMR4_CNT,TIMER0 Timer n Counter Register" group.long 0xE4++0x3 line.long 0x00 "TIMER0_TMR4_PER,TIMER0 Timer n Period Register" group.long 0xE8++0x3 line.long 0x00 "TIMER0_TMR4_WID,TIMER0 Timer n Width Register" group.long 0xEC++0x3 line.long 0x00 "TIMER0_TMR4_DLY,TIMER0 Timer n Delay Register" group.word 0xFC++0x1 line.word 0x00 "TIMER0_TMR5_CFG,TIMER0 Timer n Configuration Register" bitfld.word 0x00 15. " EMURUN ,Emulation Run" "0,1" bitfld.word 0x00 14. " BPEREN ,Broadcast Period Enable" "0,1" bitfld.word 0x00 13. " BWIDEN ,Broadcast Width Enable" "0,1" bitfld.word 0x00 12. " BDLYEN ,Broadcast Delay Enable" "0,1" newline bitfld.word 0x00 11. " OUTDIS ,Output Disable" "0,1" bitfld.word 0x00 10. " TINSEL ,Timer Input Select (for WIDCAP, WATCHDOG, PININT, EXTCLK modes)" "0,1" bitfld.word 0x00 8.--9. " CLKSEL ,Clock Select" "0,1,2,3" bitfld.word 0x00 7. " PULSEHI ,Polarity Response Select" "0,1" newline bitfld.word 0x00 6. " SLAVETRIG ,Slave Trigger Response." "0,1" bitfld.word 0x00 4.--5. " IRQMODE ,Interrupt Modes" "0,1,2,3" bitfld.word 0x00 0.--3. " TMODE ,Timer Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x100++0x3 line.long 0x00 "TIMER0_TMR5_CNT,TIMER0 Timer n Counter Register" group.long 0x104++0x3 line.long 0x00 "TIMER0_TMR5_PER,TIMER0 Timer n Period Register" group.long 0x108++0x3 line.long 0x00 "TIMER0_TMR5_WID,TIMER0 Timer n Width Register" group.long 0x10C++0x3 line.long 0x00 "TIMER0_TMR5_DLY,TIMER0 Timer n Delay Register" group.word 0x11C++0x1 line.word 0x00 "TIMER0_TMR6_CFG,TIMER0 Timer n Configuration Register" bitfld.word 0x00 15. " EMURUN ,Emulation Run" "0,1" bitfld.word 0x00 14. " BPEREN ,Broadcast Period Enable" "0,1" bitfld.word 0x00 13. " BWIDEN ,Broadcast Width Enable" "0,1" bitfld.word 0x00 12. " BDLYEN ,Broadcast Delay Enable" "0,1" newline bitfld.word 0x00 11. " OUTDIS ,Output Disable" "0,1" bitfld.word 0x00 10. " TINSEL ,Timer Input Select (for WIDCAP, WATCHDOG, PININT, EXTCLK modes)" "0,1" bitfld.word 0x00 8.--9. " CLKSEL ,Clock Select" "0,1,2,3" bitfld.word 0x00 7. " PULSEHI ,Polarity Response Select" "0,1" newline bitfld.word 0x00 6. " SLAVETRIG ,Slave Trigger Response." "0,1" bitfld.word 0x00 4.--5. " IRQMODE ,Interrupt Modes" "0,1,2,3" bitfld.word 0x00 0.--3. " TMODE ,Timer Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x120++0x3 line.long 0x00 "TIMER0_TMR6_CNT,TIMER0 Timer n Counter Register" group.long 0x124++0x3 line.long 0x00 "TIMER0_TMR6_PER,TIMER0 Timer n Period Register" group.long 0x128++0x3 line.long 0x00 "TIMER0_TMR6_WID,TIMER0 Timer n Width Register" group.long 0x12C++0x3 line.long 0x00 "TIMER0_TMR6_DLY,TIMER0 Timer n Delay Register" group.word 0x13C++0x1 line.word 0x00 "TIMER0_TMR7_CFG,TIMER0 Timer n Configuration Register" bitfld.word 0x00 15. " EMURUN ,Emulation Run" "0,1" bitfld.word 0x00 14. " BPEREN ,Broadcast Period Enable" "0,1" bitfld.word 0x00 13. " BWIDEN ,Broadcast Width Enable" "0,1" bitfld.word 0x00 12. " BDLYEN ,Broadcast Delay Enable" "0,1" newline bitfld.word 0x00 11. " OUTDIS ,Output Disable" "0,1" bitfld.word 0x00 10. " TINSEL ,Timer Input Select (for WIDCAP, WATCHDOG, PININT, EXTCLK modes)" "0,1" bitfld.word 0x00 8.--9. " CLKSEL ,Clock Select" "0,1,2,3" bitfld.word 0x00 7. " PULSEHI ,Polarity Response Select" "0,1" newline bitfld.word 0x00 6. " SLAVETRIG ,Slave Trigger Response." "0,1" bitfld.word 0x00 4.--5. " IRQMODE ,Interrupt Modes" "0,1,2,3" bitfld.word 0x00 0.--3. " TMODE ,Timer Mode Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.long 0x140++0x3 line.long 0x00 "TIMER0_TMR7_CNT,TIMER0 Timer n Counter Register" group.long 0x144++0x3 line.long 0x00 "TIMER0_TMR7_PER,TIMER0 Timer n Period Register" group.long 0x148++0x3 line.long 0x00 "TIMER0_TMR7_WID,TIMER0 Timer n Width Register" group.long 0x14C++0x3 line.long 0x00 "TIMER0_TMR7_DLY,TIMER0 Timer n Delay Register" tree.end tree "TMU (Thermal Monitoring Unit)" base ad:0x31016000 width 18. group.long 0x0++0x3 line.long 0x00 "TMU0_CTL,TMU0 TMU Control Register" bitfld.long 0x00 4.--7. " OSCDIV ,Oscillator Divide Ratio" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 3. " STARTCNV ,Start Conversion" "0,1" bitfld.long 0x00 1. " OSCSEL ,Oscillator Select" "0,1" bitfld.long 0x00 0. " EN ,Enable" "0,1" group.long 0x4++0x3 line.long 0x00 "TMU0_TEMP,TMU0 Temperature Value Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,Value" group.long 0x8++0x3 line.long 0x00 "TMU0_AVG,TMU0 Averaging Register" bitfld.long 0x00 0. " EN ,Value" "0,1" group.long 0xC++0x3 line.long 0x00 "TMU0_FLT_LIM_HI,TMU0 Fault High Limit Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Value" group.long 0x10++0x3 line.long 0x00 "TMU0_ALRT_LIM_HI,TMU0 Alert High Limit Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Value" group.long 0x14++0x3 line.long 0x00 "TMU0_FLT_LIM_LO,TMU0 Fault Low Limit Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Value" group.long 0x18++0x3 line.long 0x00 "TMU0_ALRT_LIM_LO,TMU0 Alert Low Limit Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Value" group.long 0x1C++0x3 line.long 0x00 "TMU0_STAT,TMU0 Status Register" bitfld.long 0x00 7. " ALRTLO ,Alert Low" "0,1" bitfld.long 0x00 6. " FLTLO ,Fault Low" "0,1" bitfld.long 0x00 5. " ALRTHI ,Alert High" "0,1" bitfld.long 0x00 4. " FLTHI ,Fault High" "0,1" group.long 0x24++0x3 line.long 0x00 "TMU0_GAIN,TMU0 Gain Value Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Value" group.long 0x28++0x3 line.long 0x00 "TMU0_IMSK,TMU0 Interrupt Mask Register" bitfld.long 0x00 3. " ALRTLO ,Alert Low Mask" "0,1" bitfld.long 0x00 2. " FLTLO ,Fault Low Mask" "0,1" bitfld.long 0x00 1. " ALRTHI ,Alert High Mask" "0,1" bitfld.long 0x00 0. " FLTHI ,Fault High Mask" "0,1" group.long 0x2C++0x3 line.long 0x00 "TMU0_OFFSET,TMU0 Offset Register" hexmask.long.word 0x00 0.--11. 1. " VALUE ,Value" tree.end tree "TRNG (True Random Number Generator)" base ad:0x310D0000 width 18. group.long 0x0++0x3 line.long 0x00 "TRNG0_OUTPUT0,TRNG0 TRNG Output Registers" group.long 0x0++0x3 line.long 0x00 "TRNG0_INPUT0,TRNG0 TRNG Input Registers" group.long 0x4++0x3 line.long 0x00 "TRNG0_OUTPUT1,TRNG0 TRNG Output Registers" group.long 0x8++0x3 line.long 0x00 "TRNG0_OUTPUT2,TRNG0 TRNG Output Registers" group.long 0xC++0x3 line.long 0x00 "TRNG0_OUTPUT3,TRNG0 TRNG Output Registers" group.long 0x10++0x3 line.long 0x00 "TRNG0_STAT,TRNG0 TRNG Status Register" bitfld.long 0x00 24. " NEEDCLK ,Need Clock" "0,1" hexmask.long.byte 0x00 16.--23. 1. " BLKAVAIL ,Blocks Available" bitfld.long 0x00 8. " TSTRDY ,Test Ready" "0,1" bitfld.long 0x00 7. " MBITFAIL ,Monobit Fail" "0,1" newline bitfld.long 0x00 6. " PKRFAIL ,Poker Fail" "0,1" bitfld.long 0x00 5. " LRUNFAIL ,Long Run Fail" "0,1" bitfld.long 0x00 4. " RUNFAIL ,Run Fail" "0,1" bitfld.long 0x00 3. " NOISEFAIL ,Noise Fail" "0,1" newline bitfld.long 0x00 2. " STUCKOUT ,Stuck Out" "0,1" bitfld.long 0x00 1. " SHDNOVR ,Shutdown Overflow" "0,1" bitfld.long 0x00 0. " RDY ,Ready" "0,1" group.long 0x10++0x3 line.long 0x00 "TRNG0_INTACK,TRNG0 TRNG Interrupt Acknowledge Register" bitfld.long 0x00 7. " MBITFAIL ,Monobit Fail Acknowledge" "0,1" hexmask.long.byte 0x00 0.--7. 1. " OPENRDGATE ,Open Read Gate" bitfld.long 0x00 6. " PKRFAIL ,Poker Fail Acknowledge" "0,1" bitfld.long 0x00 5. " LRUNFAIL ,Long Run Fail Acknowledge" "0,1" newline bitfld.long 0x00 4. " RUNFAIL ,Run Fail Acknowledge" "0,1" bitfld.long 0x00 3. " NOISEFAIL ,Noise Fail Acknowledge" "0,1" bitfld.long 0x00 2. " STUCKOUT ,Stuck Out Acknowledge" "0,1" bitfld.long 0x00 1. " SHDNOVR ,Shutdown Overflow Acknowledge" "0,1" newline bitfld.long 0x00 0. " RDY ,Ready Acknowledge" "0,1" group.long 0x14++0x3 line.long 0x00 "TRNG0_CTL,TRNG0 TRNG Control Register" hexmask.long.word 0x00 16.--31. 1. " STARTUPCYC ,Startup Cycles" bitfld.long 0x00 10. " TRNGEN ,Enable TRNG" "0,1" bitfld.long 0x00 8. " TSTMODE ,Test Mode" "0,1" bitfld.long 0x00 7. " MBITFAILMSK ,Monobit Fail Mask" "0,1" newline bitfld.long 0x00 6. " PKRFAILMSK ,Poker Fail Mask" "0,1" bitfld.long 0x00 5. " LRUNFAILMSK ,Long Run Fail Mask" "0,1" bitfld.long 0x00 4. " RUNFAILMSK ,Run Fail Mask" "0,1" bitfld.long 0x00 3. " NOISEFAILMSK ,Noise Fail Mask" "0,1" newline bitfld.long 0x00 2. " STUCKOUTMSK ,Stuck Out Mask" "0,1" bitfld.long 0x00 1. " SHDNOVRMSK ,Shutdown Overflow Mask" "0,1" bitfld.long 0x00 0. " RDYMSK ,Ready Mask" "0,1" group.long 0x18++0x3 line.long 0x00 "TRNG0_CFG,TRNG0 TRNG Configuration Register" hexmask.long.word 0x00 16.--31. 1. " MAXREFCYC ,Max Refill Cycles" bitfld.long 0x00 12.--15. " RDTIMEOUT ,Read Timeout" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.long 0x00 8.--11. " SAMPLEDIV ,Sample Div" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" hexmask.long.byte 0x00 0.--7. 1. " MINREFCYC ,Min Refill Cycles" group.long 0x1C++0x3 line.long 0x00 "TRNG0_ALMCNT,TRNG0 TRNG Alarm Counter Register" bitfld.long 0x00 24.--29. " SHDNCNT ,Shutdown Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 23. " SHDNFATAL ,Shutdown Fatal" "0,1" bitfld.long 0x00 16.--20. " SHDNTHRESH ,Shutdown Threshold" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 15. " STALLRUNPKR ,Stall Run Poker" "0,1" newline hexmask.long.byte 0x00 0.--7. 1. " ALMTHRESH ,Alarm Threshold" group.long 0x20++0x3 line.long 0x00 "TRNG0_FROEN,TRNG0 TRNG FRO Enable Register" hexmask.long.byte 0x00 0.--7. 1. " FROS ,Enable Free-Running Oscillators" group.long 0x24++0x3 line.long 0x00 "TRNG0_FRODETUNE,TRNG0 TRNG FRO De-tune Register" hexmask.long.byte 0x00 0.--7. 1. " FROS ,FRO De-tune Bits" group.long 0x28++0x3 line.long 0x00 "TRNG0_ALMMSK,TRNG0 TRNG Alarm Mask Register" hexmask.long.byte 0x00 0.--7. 1. " FROS ,FRO Alarm Mask" group.long 0x2C++0x3 line.long 0x00 "TRNG0_ALMSTP,TRNG0 TRNG Alarm Stop Register" hexmask.long.byte 0x00 0.--7. 1. " FROS ,FRO Alarm Stop Bits" group.long 0x30++0x3 line.long 0x00 "TRNG0_LFSR_L,TRNG0 TRNG LFSR Access Register" group.long 0x34++0x3 line.long 0x00 "TRNG0_LFSR_M,TRNG0 TRNG LFSR Access Register" group.long 0x38++0x3 line.long 0x00 "TRNG0_LFSR_H,TRNG0 TRNG LFSR Access Register" hexmask.long.tbyte 0x00 0.--16. 1. " VALUE ,LFSR[80:64]" group.long 0x3C++0x3 line.long 0x00 "TRNG0_CNT,TRNG0 Counter Register" hexmask.long.tbyte 0x00 0.--23. 1. " VALUE ,Sample Counter" group.long 0x40++0x3 line.long 0x00 "TRNG0_RUNCNT,TRNG0 TRNG Run Count Registers" bitfld.long 0x00 24.--29. " LENMAX ,Run Length Max" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 16.--21. " LENCNT ,Run Length Br Count" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.long 0x00 15. " STATE ,Run State" "0,1" hexmask.long.word 0x00 0.--14. 1. " TSTCNT ,Run Test Count" group.long 0x44++0x3 line.long 0x00 "TRNG0_RUN1,TRNG0 TRNG Run Test State and Result Registers" hexmask.long.word 0x00 16.--27. 1. " CNTONES ,Count Ones" hexmask.long.word 0x00 0.--11. 1. " CNTZEROS ,Count Zeros" group.long 0x48++0x3 line.long 0x00 "TRNG0_RUN2,TRNG0 TRNG Run Test State and Result Registers" hexmask.long.word 0x00 16.--27. 1. " CNTONES ,Count Ones" hexmask.long.word 0x00 0.--11. 1. " CNTZEROS ,Count Zeros" group.long 0x4C++0x3 line.long 0x00 "TRNG0_RUN3,TRNG0 TRNG Run Test State and Result Registers" hexmask.long.word 0x00 16.--27. 1. " CNTONES ,Count Ones" hexmask.long.word 0x00 0.--11. 1. " CNTZEROS ,Count Zeros" group.long 0x50++0x3 line.long 0x00 "TRNG0_RUN4,TRNG0 TRNG Run Test State and Result Registers" hexmask.long.word 0x00 16.--27. 1. " CNTONES ,Count Ones" hexmask.long.word 0x00 0.--11. 1. " CNTZEROS ,Count Zeros" group.long 0x54++0x3 line.long 0x00 "TRNG0_RUN5,TRNG0 TRNG Run Test State and Result Registers" hexmask.long.word 0x00 16.--27. 1. " CNTONES ,Count Ones" hexmask.long.word 0x00 0.--11. 1. " CNTZEROS ,Count Zeros" group.long 0x58++0x3 line.long 0x00 "TRNG0_RUN6,TRNG0 TRNG Run Test State and Result Registers" hexmask.long.word 0x00 16.--27. 1. " CNTONES ,Count Ones" hexmask.long.word 0x00 0.--11. 1. " CNTZEROS ,Count Zeros" group.long 0x5C++0x3 line.long 0x00 "TRNG0_MONOBITCNT,TRNG0 TRNG Monobit Test Result Register" hexmask.long.tbyte 0x00 0.--16. 1. " VALUE ,Monobit Count" group.long 0x60++0x3 line.long 0x00 "TRNG0_POKER0,TRNG0 TRNG Poker Test Result Registers" hexmask.long.byte 0x00 24.--31. 1. " CNT3 ,Poker Count n + 3" hexmask.long.byte 0x00 16.--23. 1. " CNT2 ,Poker Count n + 2" hexmask.long.byte 0x00 8.--15. 1. " CNT1 ,Poker Count n + 1" hexmask.long.byte 0x00 0.--7. 1. " CNT0 ,Poker Count n" group.long 0x64++0x3 line.long 0x00 "TRNG0_POKER1,TRNG0 TRNG Poker Test Result Registers" hexmask.long.byte 0x00 24.--31. 1. " CNT3 ,Poker Count n + 3" hexmask.long.byte 0x00 16.--23. 1. " CNT2 ,Poker Count n + 2" hexmask.long.byte 0x00 8.--15. 1. " CNT1 ,Poker Count n + 1" hexmask.long.byte 0x00 0.--7. 1. " CNT0 ,Poker Count n" group.long 0x68++0x3 line.long 0x00 "TRNG0_POKER2,TRNG0 TRNG Poker Test Result Registers" hexmask.long.byte 0x00 24.--31. 1. " CNT3 ,Poker Count n + 3" hexmask.long.byte 0x00 16.--23. 1. " CNT2 ,Poker Count n + 2" hexmask.long.byte 0x00 8.--15. 1. " CNT1 ,Poker Count n + 1" hexmask.long.byte 0x00 0.--7. 1. " CNT0 ,Poker Count n" group.long 0x6C++0x3 line.long 0x00 "TRNG0_POKER3,TRNG0 TRNG Poker Test Result Registers" hexmask.long.byte 0x00 24.--31. 1. " CNT3 ,Poker Count n + 3" hexmask.long.byte 0x00 16.--23. 1. " CNT2 ,Poker Count n + 2" hexmask.long.byte 0x00 8.--15. 1. " CNT1 ,Poker Count n + 1" hexmask.long.byte 0x00 0.--7. 1. " CNT0 ,Poker Count n" group.long 0x70++0x3 line.long 0x00 "TRNG0_TEST,TRNG0 TRNG Test Register" bitfld.long 0x00 31. " IRQ ,Test IRQ" "0,1" hexmask.long.word 0x00 16.--27. 1. " PATTERN ,Test Pattern" bitfld.long 0x00 8.--12. " SEL ,Test Select" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" bitfld.long 0x00 5. " RUNPKR ,Test Run Poker" "0,1" newline bitfld.long 0x00 4. " CONTPKR ,Continue Poker" "0,1" bitfld.long 0x00 3. " NOLFSRFB ,No LFSR Feedback" "0,1" bitfld.long 0x00 2. " PATTDET ,Test Pattern Detect" "0,1" bitfld.long 0x00 1. " PATTFRO ,Test Pattern FRO" "0,1" newline bitfld.long 0x00 0. " ENOUT ,Test Enable Out" "0,1" tree.end tree "TRU (Trigger Routing Unit)" base ad:0x3108A000 width 14. group.long 0x0++0x3 line.long 0x00 "TRU0_SSR0,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x4++0x3 line.long 0x00 "TRU0_SSR1,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x8++0x3 line.long 0x00 "TRU0_SSR2,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xC++0x3 line.long 0x00 "TRU0_SSR3,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x10++0x3 line.long 0x00 "TRU0_SSR4,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x14++0x3 line.long 0x00 "TRU0_SSR5,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x18++0x3 line.long 0x00 "TRU0_SSR6,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1C++0x3 line.long 0x00 "TRU0_SSR7,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x20++0x3 line.long 0x00 "TRU0_SSR8,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x24++0x3 line.long 0x00 "TRU0_SSR9,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x28++0x3 line.long 0x00 "TRU0_SSR10,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x2C++0x3 line.long 0x00 "TRU0_SSR11,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x30++0x3 line.long 0x00 "TRU0_SSR12,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x34++0x3 line.long 0x00 "TRU0_SSR13,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x38++0x3 line.long 0x00 "TRU0_SSR14,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x3C++0x3 line.long 0x00 "TRU0_SSR15,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x40++0x3 line.long 0x00 "TRU0_SSR16,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x44++0x3 line.long 0x00 "TRU0_SSR17,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x48++0x3 line.long 0x00 "TRU0_SSR18,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x4C++0x3 line.long 0x00 "TRU0_SSR19,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x50++0x3 line.long 0x00 "TRU0_SSR20,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x54++0x3 line.long 0x00 "TRU0_SSR21,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x58++0x3 line.long 0x00 "TRU0_SSR22,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x5C++0x3 line.long 0x00 "TRU0_SSR23,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x60++0x3 line.long 0x00 "TRU0_SSR24,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x64++0x3 line.long 0x00 "TRU0_SSR25,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x68++0x3 line.long 0x00 "TRU0_SSR26,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x6C++0x3 line.long 0x00 "TRU0_SSR27,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x70++0x3 line.long 0x00 "TRU0_SSR28,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x74++0x3 line.long 0x00 "TRU0_SSR29,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x78++0x3 line.long 0x00 "TRU0_SSR30,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x7C++0x3 line.long 0x00 "TRU0_SSR31,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x80++0x3 line.long 0x00 "TRU0_SSR32,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x84++0x3 line.long 0x00 "TRU0_SSR33,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x88++0x3 line.long 0x00 "TRU0_SSR34,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x8C++0x3 line.long 0x00 "TRU0_SSR35,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x90++0x3 line.long 0x00 "TRU0_SSR36,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x94++0x3 line.long 0x00 "TRU0_SSR37,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x98++0x3 line.long 0x00 "TRU0_SSR38,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x9C++0x3 line.long 0x00 "TRU0_SSR39,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xA0++0x3 line.long 0x00 "TRU0_SSR40,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xA4++0x3 line.long 0x00 "TRU0_SSR41,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xA8++0x3 line.long 0x00 "TRU0_SSR42,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xAC++0x3 line.long 0x00 "TRU0_SSR43,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xB0++0x3 line.long 0x00 "TRU0_SSR44,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xB4++0x3 line.long 0x00 "TRU0_SSR45,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xB8++0x3 line.long 0x00 "TRU0_SSR46,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xBC++0x3 line.long 0x00 "TRU0_SSR47,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xC0++0x3 line.long 0x00 "TRU0_SSR48,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xC4++0x3 line.long 0x00 "TRU0_SSR49,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xC8++0x3 line.long 0x00 "TRU0_SSR50,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xCC++0x3 line.long 0x00 "TRU0_SSR51,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xD0++0x3 line.long 0x00 "TRU0_SSR52,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xD4++0x3 line.long 0x00 "TRU0_SSR53,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xD8++0x3 line.long 0x00 "TRU0_SSR54,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xDC++0x3 line.long 0x00 "TRU0_SSR55,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xE0++0x3 line.long 0x00 "TRU0_SSR56,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xE4++0x3 line.long 0x00 "TRU0_SSR57,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xE8++0x3 line.long 0x00 "TRU0_SSR58,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xEC++0x3 line.long 0x00 "TRU0_SSR59,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xF0++0x3 line.long 0x00 "TRU0_SSR60,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xF4++0x3 line.long 0x00 "TRU0_SSR61,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xF8++0x3 line.long 0x00 "TRU0_SSR62,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0xFC++0x3 line.long 0x00 "TRU0_SSR63,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x100++0x3 line.long 0x00 "TRU0_SSR64,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x104++0x3 line.long 0x00 "TRU0_SSR65,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x108++0x3 line.long 0x00 "TRU0_SSR66,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x10C++0x3 line.long 0x00 "TRU0_SSR67,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x110++0x3 line.long 0x00 "TRU0_SSR68,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x114++0x3 line.long 0x00 "TRU0_SSR69,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x118++0x3 line.long 0x00 "TRU0_SSR70,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x11C++0x3 line.long 0x00 "TRU0_SSR71,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x120++0x3 line.long 0x00 "TRU0_SSR72,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x124++0x3 line.long 0x00 "TRU0_SSR73,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x128++0x3 line.long 0x00 "TRU0_SSR74,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x12C++0x3 line.long 0x00 "TRU0_SSR75,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x130++0x3 line.long 0x00 "TRU0_SSR76,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x134++0x3 line.long 0x00 "TRU0_SSR77,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x138++0x3 line.long 0x00 "TRU0_SSR78,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x13C++0x3 line.long 0x00 "TRU0_SSR79,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x140++0x3 line.long 0x00 "TRU0_SSR80,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x144++0x3 line.long 0x00 "TRU0_SSR81,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x148++0x3 line.long 0x00 "TRU0_SSR82,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x14C++0x3 line.long 0x00 "TRU0_SSR83,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x150++0x3 line.long 0x00 "TRU0_SSR84,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x154++0x3 line.long 0x00 "TRU0_SSR85,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x158++0x3 line.long 0x00 "TRU0_SSR86,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x15C++0x3 line.long 0x00 "TRU0_SSR87,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x160++0x3 line.long 0x00 "TRU0_SSR88,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x164++0x3 line.long 0x00 "TRU0_SSR89,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x168++0x3 line.long 0x00 "TRU0_SSR90,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x16C++0x3 line.long 0x00 "TRU0_SSR91,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x170++0x3 line.long 0x00 "TRU0_SSR92,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x174++0x3 line.long 0x00 "TRU0_SSR93,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x178++0x3 line.long 0x00 "TRU0_SSR94,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x17C++0x3 line.long 0x00 "TRU0_SSR95,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x180++0x3 line.long 0x00 "TRU0_SSR96,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x184++0x3 line.long 0x00 "TRU0_SSR97,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x188++0x3 line.long 0x00 "TRU0_SSR98,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x18C++0x3 line.long 0x00 "TRU0_SSR99,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x190++0x3 line.long 0x00 "TRU0_SSR100,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x194++0x3 line.long 0x00 "TRU0_SSR101,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x198++0x3 line.long 0x00 "TRU0_SSR102,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x19C++0x3 line.long 0x00 "TRU0_SSR103,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1A0++0x3 line.long 0x00 "TRU0_SSR104,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1A4++0x3 line.long 0x00 "TRU0_SSR105,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1A8++0x3 line.long 0x00 "TRU0_SSR106,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1AC++0x3 line.long 0x00 "TRU0_SSR107,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1B0++0x3 line.long 0x00 "TRU0_SSR108,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1B4++0x3 line.long 0x00 "TRU0_SSR109,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1B8++0x3 line.long 0x00 "TRU0_SSR110,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1BC++0x3 line.long 0x00 "TRU0_SSR111,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1C0++0x3 line.long 0x00 "TRU0_SSR112,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1C4++0x3 line.long 0x00 "TRU0_SSR113,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1C8++0x3 line.long 0x00 "TRU0_SSR114,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1CC++0x3 line.long 0x00 "TRU0_SSR115,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1D0++0x3 line.long 0x00 "TRU0_SSR116,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1D4++0x3 line.long 0x00 "TRU0_SSR117,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1D8++0x3 line.long 0x00 "TRU0_SSR118,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1DC++0x3 line.long 0x00 "TRU0_SSR119,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1E0++0x3 line.long 0x00 "TRU0_SSR120,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1E4++0x3 line.long 0x00 "TRU0_SSR121,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1E8++0x3 line.long 0x00 "TRU0_SSR122,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1EC++0x3 line.long 0x00 "TRU0_SSR123,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1F0++0x3 line.long 0x00 "TRU0_SSR124,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1F4++0x3 line.long 0x00 "TRU0_SSR125,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1F8++0x3 line.long 0x00 "TRU0_SSR126,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x1FC++0x3 line.long 0x00 "TRU0_SSR127,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x200++0x3 line.long 0x00 "TRU0_SSR128,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x204++0x3 line.long 0x00 "TRU0_SSR129,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x208++0x3 line.long 0x00 "TRU0_SSR130,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x20C++0x3 line.long 0x00 "TRU0_SSR131,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x210++0x3 line.long 0x00 "TRU0_SSR132,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x214++0x3 line.long 0x00 "TRU0_SSR133,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x218++0x3 line.long 0x00 "TRU0_SSR134,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x21C++0x3 line.long 0x00 "TRU0_SSR135,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x220++0x3 line.long 0x00 "TRU0_SSR136,TRU0 Slave Select Register" bitfld.long 0x00 31. " LOCK ,SSRn Lock" "0,1" hexmask.long.byte 0x00 0.--7. 1. " SSR ,SSRn Slave Select" group.long 0x7E0++0x3 line.long 0x00 "TRU0_MTR,TRU0 Master Trigger Register" hexmask.long.byte 0x00 24.--31. 1. " MTR3 ,Master Trigger Register 3" hexmask.long.byte 0x00 16.--23. 1. " MTR2 ,Master Trigger Register 2" hexmask.long.byte 0x00 8.--15. 1. " MTR1 ,Master Trigger Register 1" hexmask.long.byte 0x00 0.--7. 1. " MTR0 ,Master Trigger Register 0" group.long 0x7E8++0x3 line.long 0x00 "TRU0_ERRADDR,TRU0 Error Address Register" hexmask.long.word 0x00 0.--11. 1. " ADDR ,Error Address" group.long 0x7EC++0x3 line.long 0x00 "TRU0_STAT,TRU0 Status Information Register" bitfld.long 0x00 1. " ADDRERR ,Address Error Status" "0,1" bitfld.long 0x00 0. " LWERR ,Lock Write Error Status" "0,1" group.long 0x7F4++0x3 line.long 0x00 "TRU0_GCTL,TRU0 Global Control Register" bitfld.long 0x00 31. " LOCK ,GCTL Lock Bit" "0,1" bitfld.long 0x00 2. " MTRL ,MTR Lock Bit" "0,1" bitfld.long 0x00 1. " RESET ,Soft Reset" "0,1" bitfld.long 0x00 0. " EN ,Non-MMR Enable" "0,1" tree.end tree "TWI (Two-Wire Interface)" tree "TWI0" base ad:0x31001400 width 15. group.word 0x0++0x1 line.word 0x00 "TWI0_CLKDIV,TWI0 SCL Clock Divider Register" hexmask.word.byte 0x00 8.--15. 1. " CLKHI ,SCL Clock High Periods" hexmask.word.byte 0x00 0.--7. 1. " CLKLO ,SCL Clock Low Periods" group.word 0x4++0x1 line.word 0x00 "TWI0_CTL,TWI0 Control Register" bitfld.word 0x00 9. " SCCB ,SCCB Compatibility" "0,1" bitfld.word 0x00 7. " EN ,Enable Module" "0,1" hexmask.word.byte 0x00 0.--6. 1. " PRESCALE ,SCLK0_0 Prescale Value" group.word 0x8++0x1 line.word 0x00 "TWI0_SLVCTL,TWI0 Slave Mode Control Register" bitfld.word 0x00 4. " GEN ,General Call Enable" "0,1" bitfld.word 0x00 3. " NAK ,Not Acknowledge" "0,1" bitfld.word 0x00 2. " TDVAL ,Transmit Data Valid for Slave" "0,1" bitfld.word 0x00 0. " EN ,Enable Slave Mode" "0,1" group.word 0xC++0x1 line.word 0x00 "TWI0_SLVSTAT,TWI0 Slave Mode Status Register" bitfld.word 0x00 1. " GCALL ,General Call" "0,1" bitfld.word 0x00 0. " DIR ,Transfer Direction for Slave" "0,1" group.word 0x10++0x1 line.word 0x00 "TWI0_SLVADDR,TWI0 Slave Mode Address Register" hexmask.word.byte 0x00 0.--6. 1. " ADDR ,Slave Mode Address" group.word 0x14++0x1 line.word 0x00 "TWI0_MSTRCTL,TWI0 Master Mode Control Registers" bitfld.word 0x00 15. " SCLOVR ,Serial Clock Override" "0,1" bitfld.word 0x00 14. " SDAOVR ,Serial Data Override" "0,1" hexmask.word.byte 0x00 6.--13. 1. " DCNT ,Data Transfer Count" bitfld.word 0x00 5. " RSTART ,Repeat Start" "0,1" newline bitfld.word 0x00 4. " STOP ,Issue Stop Condition" "0,1" bitfld.word 0x00 3. " FAST ,Fast Mode" "0,1" bitfld.word 0x00 2. " DIR ,Transfer Direction for Master" "0,1" bitfld.word 0x00 0. " EN ,Enable Master Mode" "0,1" group.word 0x18++0x1 line.word 0x00 "TWI0_MSTRSTAT,TWI0 Master Mode Status Register" bitfld.word 0x00 8. " BUSBUSY ,Bus Busy" "0,1" bitfld.word 0x00 7. " SCLSEN ,Serial Clock Sense" "0,1" bitfld.word 0x00 6. " SDASEN ,Serial Data Sense" "0,1" bitfld.word 0x00 5. " BUFWRERR ,Buffer Write Error" "0,1" newline bitfld.word 0x00 4. " BUFRDERR ,Buffer Read Error" "0,1" bitfld.word 0x00 3. " DNAK ,Data Not Acknowledged" "0,1" bitfld.word 0x00 2. " ANAK ,Address Not Acknowledged" "0,1" bitfld.word 0x00 1. " LOSTARB ,Lost Arbitration" "0,1" newline bitfld.word 0x00 0. " MPROG ,Master Transfer in Progress" "0,1" group.word 0x1C++0x1 line.word 0x00 "TWI0_MSTRADDR,TWI0 Master Mode Address Register" hexmask.word.byte 0x00 0.--6. 1. " ADDR ,Master Mode Address" group.word 0x20++0x1 line.word 0x00 "TWI0_ISTAT,TWI0 Interrupt Status Register" bitfld.word 0x00 15. " SCLI ,Serial Clock Interrupt" "0,1" bitfld.word 0x00 14. " SDAI ,Serial Data Interrupt" "0,1" bitfld.word 0x00 7. " RXSERV ,Rx FIFO Service" "0,1" bitfld.word 0x00 6. " TXSERV ,Tx FIFO Service" "0,1" newline bitfld.word 0x00 5. " MERR ,Master Transfer Error" "0,1" bitfld.word 0x00 4. " MCOMP ,Master Transfer Complete" "0,1" bitfld.word 0x00 3. " SOVF ,Slave Overflow" "0,1" bitfld.word 0x00 2. " SERR ,Slave Transfer Error" "0,1" newline bitfld.word 0x00 1. " SCOMP ,Slave Transfer Complete" "0,1" bitfld.word 0x00 0. " SINIT ,Slave Transfer Initiated" "0,1" group.word 0x24++0x1 line.word 0x00 "TWI0_IMSK,TWI0 Interrupt Mask Register" bitfld.word 0x00 15. " SCLI ,Serial Clock Interrupt Mask" "0,1" bitfld.word 0x00 14. " SDAI ,Serial Data Interrupt Mask" "0,1" bitfld.word 0x00 7. " RXSERV ,Rx FIFO Service Interrupt Mask" "0,1" bitfld.word 0x00 6. " TXSERV ,Tx FIFO Service Interrupt Mask" "0,1" newline bitfld.word 0x00 5. " MERR ,Master Transfer Error Interrupt Mask" "0,1" bitfld.word 0x00 4. " MCOMP ,Master Transfer Complete Interrupt Mask" "0,1" bitfld.word 0x00 3. " SOVF ,Slave Overflow Interrupt Mask" "0,1" bitfld.word 0x00 2. " SERR ,Slave Transfer Error Interrupt Mask" "0,1" newline bitfld.word 0x00 1. " SCOMP ,Slave Transfer Complete Interrupt Mask" "0,1" bitfld.word 0x00 0. " SINIT ,Slave Transfer Initiated Interrupt Mask" "0,1" group.word 0x28++0x1 line.word 0x00 "TWI0_FIFOCTL,TWI0 FIFO Control Register" bitfld.word 0x00 3. " RXILEN ,Rx Buffer Interrupt Length" "0,1" bitfld.word 0x00 2. " TXILEN ,Tx Buffer Interrupt Length" "0,1" bitfld.word 0x00 1. " RXFLUSH ,Rx Buffer Flush" "0,1" bitfld.word 0x00 0. " TXFLUSH ,Tx Buffer Flush" "0,1" group.word 0x2C++0x1 line.word 0x00 "TWI0_FIFOSTAT,TWI0 FIFO Status Register" bitfld.word 0x00 2.--3. " RXSTAT ,Rx FIFO Status" "0,1,2,3" bitfld.word 0x00 0.--1. " TXSTAT ,Tx FIFO Status" "0,1,2,3" group.word 0x80++0x1 line.word 0x00 "TWI0_TXDATA8,TWI0 Tx Data Single-Byte Register" hexmask.word.byte 0x00 0.--7. 1. " VALUE ,Tx Data 8-Bit Value" group.word 0x84++0x1 line.word 0x00 "TWI0_TXDATA16,TWI0 Tx Data Double-Byte Register" group.word 0x88++0x1 line.word 0x00 "TWI0_RXDATA8,TWI0 Rx Data Single-Byte Register" hexmask.word.byte 0x00 0.--7. 1. " VALUE ,Rx Data 8-Bit Value" group.word 0x8C++0x1 line.word 0x00 "TWI0_RXDATA16,TWI0 Rx Data Double-Byte Register" tree.end tree "TWI1" base ad:0x31001500 width 15. group.word 0x0++0x1 line.word 0x00 "TWI1_CLKDIV,TWI1 SCL Clock Divider Register" hexmask.word.byte 0x00 8.--15. 1. " CLKHI ,SCL Clock High Periods" hexmask.word.byte 0x00 0.--7. 1. " CLKLO ,SCL Clock Low Periods" group.word 0x4++0x1 line.word 0x00 "TWI1_CTL,TWI1 Control Register" bitfld.word 0x00 9. " SCCB ,SCCB Compatibility" "0,1" bitfld.word 0x00 7. " EN ,Enable Module" "0,1" hexmask.word.byte 0x00 0.--6. 1. " PRESCALE ,SCLK0_0 Prescale Value" group.word 0x8++0x1 line.word 0x00 "TWI1_SLVCTL,TWI1 Slave Mode Control Register" bitfld.word 0x00 4. " GEN ,General Call Enable" "0,1" bitfld.word 0x00 3. " NAK ,Not Acknowledge" "0,1" bitfld.word 0x00 2. " TDVAL ,Transmit Data Valid for Slave" "0,1" bitfld.word 0x00 0. " EN ,Enable Slave Mode" "0,1" group.word 0xC++0x1 line.word 0x00 "TWI1_SLVSTAT,TWI1 Slave Mode Status Register" bitfld.word 0x00 1. " GCALL ,General Call" "0,1" bitfld.word 0x00 0. " DIR ,Transfer Direction for Slave" "0,1" group.word 0x10++0x1 line.word 0x00 "TWI1_SLVADDR,TWI1 Slave Mode Address Register" hexmask.word.byte 0x00 0.--6. 1. " ADDR ,Slave Mode Address" group.word 0x14++0x1 line.word 0x00 "TWI1_MSTRCTL,TWI1 Master Mode Control Registers" bitfld.word 0x00 15. " SCLOVR ,Serial Clock Override" "0,1" bitfld.word 0x00 14. " SDAOVR ,Serial Data Override" "0,1" hexmask.word.byte 0x00 6.--13. 1. " DCNT ,Data Transfer Count" bitfld.word 0x00 5. " RSTART ,Repeat Start" "0,1" newline bitfld.word 0x00 4. " STOP ,Issue Stop Condition" "0,1" bitfld.word 0x00 3. " FAST ,Fast Mode" "0,1" bitfld.word 0x00 2. " DIR ,Transfer Direction for Master" "0,1" bitfld.word 0x00 0. " EN ,Enable Master Mode" "0,1" group.word 0x18++0x1 line.word 0x00 "TWI1_MSTRSTAT,TWI1 Master Mode Status Register" bitfld.word 0x00 8. " BUSBUSY ,Bus Busy" "0,1" bitfld.word 0x00 7. " SCLSEN ,Serial Clock Sense" "0,1" bitfld.word 0x00 6. " SDASEN ,Serial Data Sense" "0,1" bitfld.word 0x00 5. " BUFWRERR ,Buffer Write Error" "0,1" newline bitfld.word 0x00 4. " BUFRDERR ,Buffer Read Error" "0,1" bitfld.word 0x00 3. " DNAK ,Data Not Acknowledged" "0,1" bitfld.word 0x00 2. " ANAK ,Address Not Acknowledged" "0,1" bitfld.word 0x00 1. " LOSTARB ,Lost Arbitration" "0,1" newline bitfld.word 0x00 0. " MPROG ,Master Transfer in Progress" "0,1" group.word 0x1C++0x1 line.word 0x00 "TWI1_MSTRADDR,TWI1 Master Mode Address Register" hexmask.word.byte 0x00 0.--6. 1. " ADDR ,Master Mode Address" group.word 0x20++0x1 line.word 0x00 "TWI1_ISTAT,TWI1 Interrupt Status Register" bitfld.word 0x00 15. " SCLI ,Serial Clock Interrupt" "0,1" bitfld.word 0x00 14. " SDAI ,Serial Data Interrupt" "0,1" bitfld.word 0x00 7. " RXSERV ,Rx FIFO Service" "0,1" bitfld.word 0x00 6. " TXSERV ,Tx FIFO Service" "0,1" newline bitfld.word 0x00 5. " MERR ,Master Transfer Error" "0,1" bitfld.word 0x00 4. " MCOMP ,Master Transfer Complete" "0,1" bitfld.word 0x00 3. " SOVF ,Slave Overflow" "0,1" bitfld.word 0x00 2. " SERR ,Slave Transfer Error" "0,1" newline bitfld.word 0x00 1. " SCOMP ,Slave Transfer Complete" "0,1" bitfld.word 0x00 0. " SINIT ,Slave Transfer Initiated" "0,1" group.word 0x24++0x1 line.word 0x00 "TWI1_IMSK,TWI1 Interrupt Mask Register" bitfld.word 0x00 15. " SCLI ,Serial Clock Interrupt Mask" "0,1" bitfld.word 0x00 14. " SDAI ,Serial Data Interrupt Mask" "0,1" bitfld.word 0x00 7. " RXSERV ,Rx FIFO Service Interrupt Mask" "0,1" bitfld.word 0x00 6. " TXSERV ,Tx FIFO Service Interrupt Mask" "0,1" newline bitfld.word 0x00 5. " MERR ,Master Transfer Error Interrupt Mask" "0,1" bitfld.word 0x00 4. " MCOMP ,Master Transfer Complete Interrupt Mask" "0,1" bitfld.word 0x00 3. " SOVF ,Slave Overflow Interrupt Mask" "0,1" bitfld.word 0x00 2. " SERR ,Slave Transfer Error Interrupt Mask" "0,1" newline bitfld.word 0x00 1. " SCOMP ,Slave Transfer Complete Interrupt Mask" "0,1" bitfld.word 0x00 0. " SINIT ,Slave Transfer Initiated Interrupt Mask" "0,1" group.word 0x28++0x1 line.word 0x00 "TWI1_FIFOCTL,TWI1 FIFO Control Register" bitfld.word 0x00 3. " RXILEN ,Rx Buffer Interrupt Length" "0,1" bitfld.word 0x00 2. " TXILEN ,Tx Buffer Interrupt Length" "0,1" bitfld.word 0x00 1. " RXFLUSH ,Rx Buffer Flush" "0,1" bitfld.word 0x00 0. " TXFLUSH ,Tx Buffer Flush" "0,1" group.word 0x2C++0x1 line.word 0x00 "TWI1_FIFOSTAT,TWI1 FIFO Status Register" bitfld.word 0x00 2.--3. " RXSTAT ,Rx FIFO Status" "0,1,2,3" bitfld.word 0x00 0.--1. " TXSTAT ,Tx FIFO Status" "0,1,2,3" group.word 0x80++0x1 line.word 0x00 "TWI1_TXDATA8,TWI1 Tx Data Single-Byte Register" hexmask.word.byte 0x00 0.--7. 1. " VALUE ,Tx Data 8-Bit Value" group.word 0x84++0x1 line.word 0x00 "TWI1_TXDATA16,TWI1 Tx Data Double-Byte Register" group.word 0x88++0x1 line.word 0x00 "TWI1_RXDATA8,TWI1 Rx Data Single-Byte Register" hexmask.word.byte 0x00 0.--7. 1. " VALUE ,Rx Data 8-Bit Value" group.word 0x8C++0x1 line.word 0x00 "TWI1_RXDATA16,TWI1 Rx Data Double-Byte Register" tree.end tree "TWI2" base ad:0x31001600 width 15. group.word 0x0++0x1 line.word 0x00 "TWI2_CLKDIV,TWI2 SCL Clock Divider Register" hexmask.word.byte 0x00 8.--15. 1. " CLKHI ,SCL Clock High Periods" hexmask.word.byte 0x00 0.--7. 1. " CLKLO ,SCL Clock Low Periods" group.word 0x4++0x1 line.word 0x00 "TWI2_CTL,TWI2 Control Register" bitfld.word 0x00 9. " SCCB ,SCCB Compatibility" "0,1" bitfld.word 0x00 7. " EN ,Enable Module" "0,1" hexmask.word.byte 0x00 0.--6. 1. " PRESCALE ,SCLK0_0 Prescale Value" group.word 0x8++0x1 line.word 0x00 "TWI2_SLVCTL,TWI2 Slave Mode Control Register" bitfld.word 0x00 4. " GEN ,General Call Enable" "0,1" bitfld.word 0x00 3. " NAK ,Not Acknowledge" "0,1" bitfld.word 0x00 2. " TDVAL ,Transmit Data Valid for Slave" "0,1" bitfld.word 0x00 0. " EN ,Enable Slave Mode" "0,1" group.word 0xC++0x1 line.word 0x00 "TWI2_SLVSTAT,TWI2 Slave Mode Status Register" bitfld.word 0x00 1. " GCALL ,General Call" "0,1" bitfld.word 0x00 0. " DIR ,Transfer Direction for Slave" "0,1" group.word 0x10++0x1 line.word 0x00 "TWI2_SLVADDR,TWI2 Slave Mode Address Register" hexmask.word.byte 0x00 0.--6. 1. " ADDR ,Slave Mode Address" group.word 0x14++0x1 line.word 0x00 "TWI2_MSTRCTL,TWI2 Master Mode Control Registers" bitfld.word 0x00 15. " SCLOVR ,Serial Clock Override" "0,1" bitfld.word 0x00 14. " SDAOVR ,Serial Data Override" "0,1" hexmask.word.byte 0x00 6.--13. 1. " DCNT ,Data Transfer Count" bitfld.word 0x00 5. " RSTART ,Repeat Start" "0,1" newline bitfld.word 0x00 4. " STOP ,Issue Stop Condition" "0,1" bitfld.word 0x00 3. " FAST ,Fast Mode" "0,1" bitfld.word 0x00 2. " DIR ,Transfer Direction for Master" "0,1" bitfld.word 0x00 0. " EN ,Enable Master Mode" "0,1" group.word 0x18++0x1 line.word 0x00 "TWI2_MSTRSTAT,TWI2 Master Mode Status Register" bitfld.word 0x00 8. " BUSBUSY ,Bus Busy" "0,1" bitfld.word 0x00 7. " SCLSEN ,Serial Clock Sense" "0,1" bitfld.word 0x00 6. " SDASEN ,Serial Data Sense" "0,1" bitfld.word 0x00 5. " BUFWRERR ,Buffer Write Error" "0,1" newline bitfld.word 0x00 4. " BUFRDERR ,Buffer Read Error" "0,1" bitfld.word 0x00 3. " DNAK ,Data Not Acknowledged" "0,1" bitfld.word 0x00 2. " ANAK ,Address Not Acknowledged" "0,1" bitfld.word 0x00 1. " LOSTARB ,Lost Arbitration" "0,1" newline bitfld.word 0x00 0. " MPROG ,Master Transfer in Progress" "0,1" group.word 0x1C++0x1 line.word 0x00 "TWI2_MSTRADDR,TWI2 Master Mode Address Register" hexmask.word.byte 0x00 0.--6. 1. " ADDR ,Master Mode Address" group.word 0x20++0x1 line.word 0x00 "TWI2_ISTAT,TWI2 Interrupt Status Register" bitfld.word 0x00 15. " SCLI ,Serial Clock Interrupt" "0,1" bitfld.word 0x00 14. " SDAI ,Serial Data Interrupt" "0,1" bitfld.word 0x00 7. " RXSERV ,Rx FIFO Service" "0,1" bitfld.word 0x00 6. " TXSERV ,Tx FIFO Service" "0,1" newline bitfld.word 0x00 5. " MERR ,Master Transfer Error" "0,1" bitfld.word 0x00 4. " MCOMP ,Master Transfer Complete" "0,1" bitfld.word 0x00 3. " SOVF ,Slave Overflow" "0,1" bitfld.word 0x00 2. " SERR ,Slave Transfer Error" "0,1" newline bitfld.word 0x00 1. " SCOMP ,Slave Transfer Complete" "0,1" bitfld.word 0x00 0. " SINIT ,Slave Transfer Initiated" "0,1" group.word 0x24++0x1 line.word 0x00 "TWI2_IMSK,TWI2 Interrupt Mask Register" bitfld.word 0x00 15. " SCLI ,Serial Clock Interrupt Mask" "0,1" bitfld.word 0x00 14. " SDAI ,Serial Data Interrupt Mask" "0,1" bitfld.word 0x00 7. " RXSERV ,Rx FIFO Service Interrupt Mask" "0,1" bitfld.word 0x00 6. " TXSERV ,Tx FIFO Service Interrupt Mask" "0,1" newline bitfld.word 0x00 5. " MERR ,Master Transfer Error Interrupt Mask" "0,1" bitfld.word 0x00 4. " MCOMP ,Master Transfer Complete Interrupt Mask" "0,1" bitfld.word 0x00 3. " SOVF ,Slave Overflow Interrupt Mask" "0,1" bitfld.word 0x00 2. " SERR ,Slave Transfer Error Interrupt Mask" "0,1" newline bitfld.word 0x00 1. " SCOMP ,Slave Transfer Complete Interrupt Mask" "0,1" bitfld.word 0x00 0. " SINIT ,Slave Transfer Initiated Interrupt Mask" "0,1" group.word 0x28++0x1 line.word 0x00 "TWI2_FIFOCTL,TWI2 FIFO Control Register" bitfld.word 0x00 3. " RXILEN ,Rx Buffer Interrupt Length" "0,1" bitfld.word 0x00 2. " TXILEN ,Tx Buffer Interrupt Length" "0,1" bitfld.word 0x00 1. " RXFLUSH ,Rx Buffer Flush" "0,1" bitfld.word 0x00 0. " TXFLUSH ,Tx Buffer Flush" "0,1" group.word 0x2C++0x1 line.word 0x00 "TWI2_FIFOSTAT,TWI2 FIFO Status Register" bitfld.word 0x00 2.--3. " RXSTAT ,Rx FIFO Status" "0,1,2,3" bitfld.word 0x00 0.--1. " TXSTAT ,Tx FIFO Status" "0,1,2,3" group.word 0x80++0x1 line.word 0x00 "TWI2_TXDATA8,TWI2 Tx Data Single-Byte Register" hexmask.word.byte 0x00 0.--7. 1. " VALUE ,Tx Data 8-Bit Value" group.word 0x84++0x1 line.word 0x00 "TWI2_TXDATA16,TWI2 Tx Data Double-Byte Register" group.word 0x88++0x1 line.word 0x00 "TWI2_RXDATA8,TWI2 Rx Data Single-Byte Register" hexmask.word.byte 0x00 0.--7. 1. " VALUE ,Rx Data 8-Bit Value" group.word 0x8C++0x1 line.word 0x00 "TWI2_RXDATA16,TWI2 Rx Data Double-Byte Register" tree.end tree.end tree "UART (Universal Asynchronous Receiver/Transmitter)" tree "UART0" base ad:0x31003004 width 16. group.long 0x0++0x3 line.long 0x00 "UART0_CTL,UART0 Control Register" bitfld.long 0x00 30. " RFRT ,Receive FIFO RTS Threshold" "0,1" bitfld.long 0x00 29. " RFIT ,Receive FIFO IRQ Threshold" "0,1" bitfld.long 0x00 28. " ACTS ,Automatic CTS" "0,1" bitfld.long 0x00 27. " ARTS ,Automatic RTS" "0,1" newline bitfld.long 0x00 26. " XOFF ,Transmitter off" "0,1" bitfld.long 0x00 25. " MRTS ,Manual Request to Send" "0,1" bitfld.long 0x00 24. " TPOLC ,IrDA TX Polarity Change" "0,1" bitfld.long 0x00 23. " RPOLC ,IrDA RX Polarity Change" "0,1" newline bitfld.long 0x00 22. " FCPOL ,Flow Control Pin Polarity" "0,1" bitfld.long 0x00 19. " SB ,Set Break" "0,1" bitfld.long 0x00 18. " FFE ,Force Framing Error on Transmit" "0,1" bitfld.long 0x00 17. " FPE ,Force Parity Error on Transmit" "0,1" newline bitfld.long 0x00 16. " STP ,Sticky Parity" "0,1" bitfld.long 0x00 15. " EPS ,Even Parity Select" "0,1" bitfld.long 0x00 14. " PEN ,Parity Enable" "0,1" bitfld.long 0x00 13. " STBH ,Stop Bits (Half Bit Time)" "0,1" newline bitfld.long 0x00 12. " STB ,Stop Bits" "0,1" bitfld.long 0x00 8.--9. " WLS ,Word Length Select" "0,1,2,3" bitfld.long 0x00 4.--5. " MOD ,Mode of Operation" "0,1,2,3" bitfld.long 0x00 1. " LOOP_EN ,Loopback Enable" "0,1" newline bitfld.long 0x00 0. " EN ,Enable UART" "0,1" group.long 0x4++0x3 line.long 0x00 "UART0_STAT,UART0 Status Register" bitfld.long 0x00 17. " RFCS ,Receive FIFO Count Status" "0,1" bitfld.long 0x00 16. " CTS ,Clear to Send" "0,1" bitfld.long 0x00 12. " SCTS ,Sticky CTS" "0,1" bitfld.long 0x00 11. " RO ,Reception On-going" "0,1" newline bitfld.long 0x00 10. " ADDR ,Address Bit Status" "0,1" bitfld.long 0x00 9. " ASTKY ,Address Sticky" "0,1" bitfld.long 0x00 8. " TFI ,Transmission Finished Indicator" "0,1" bitfld.long 0x00 7. " TEMT ,TSR and THR Empty" "0,1" newline bitfld.long 0x00 5. " THRE ,Transmit Hold Register Empty" "0,1" bitfld.long 0x00 4. " BI ,Break Indicator" "0,1" bitfld.long 0x00 3. " FE ,Framing Error" "0,1" bitfld.long 0x00 2. " PE ,Parity Error" "0,1" newline bitfld.long 0x00 1. " OE ,Overrun Error" "0,1" bitfld.long 0x00 0. " DR ,Data Ready" "0,1" group.long 0x8++0x3 line.long 0x00 "UART0_SCR,UART0 Scratch Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Stored 8-bit Data" group.long 0xC++0x3 line.long 0x00 "UART0_CLK,UART0 Clock Rate Register" bitfld.long 0x00 31. " EDBO ,Enable Divide By One" "0,1" hexmask.long.word 0x00 0.--15. 1. " DIV ,Divisor" group.long 0x10++0x3 line.long 0x00 "UART0_IMSK,UART0 Interrupt Mask Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Status" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Status" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Status" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Status" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Status" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Status" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Status" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Status" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Status" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Status" "0,1" group.long 0x14++0x3 line.long 0x00 "UART0_IMSK_SET,UART0 Interrupt Mask Set Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Set" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Set" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Set" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Set" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Set" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Set" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Set" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Set" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Set" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Set" "0,1" group.long 0x18++0x3 line.long 0x00 "UART0_IMSK_CLR,UART0 Interrupt Mask Clear Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Clear" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Clear" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Clear" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Clear" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Clear" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Clear" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Clear" "0,1" group.long 0x1C++0x3 line.long 0x00 "UART0_RBR,UART0 Receive Buffer Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8-bit data" group.long 0x20++0x3 line.long 0x00 "UART0_THR,UART0 Transmit Hold Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8 bit data" group.long 0x24++0x3 line.long 0x00 "UART0_TAIP,UART0 Transmit Address/Insert Pulse Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8-bit data" group.long 0x28++0x3 line.long 0x00 "UART0_TSR,UART0 Transmit Shift Register" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Contents of TSR" group.long 0x2C++0x3 line.long 0x00 "UART0_RSR,UART0 Receive Shift Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Contents of RSR" group.long 0x30++0x3 line.long 0x00 "UART0_TXCNT,UART0 Transmit Counter Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Counter Value" group.long 0x34++0x3 line.long 0x00 "UART0_RXCNT,UART0 Receive Counter Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Counter Value" tree.end tree "UART1" base ad:0x31003404 width 16. group.long 0x0++0x3 line.long 0x00 "UART1_CTL,UART1 Control Register" bitfld.long 0x00 30. " RFRT ,Receive FIFO RTS Threshold" "0,1" bitfld.long 0x00 29. " RFIT ,Receive FIFO IRQ Threshold" "0,1" bitfld.long 0x00 28. " ACTS ,Automatic CTS" "0,1" bitfld.long 0x00 27. " ARTS ,Automatic RTS" "0,1" newline bitfld.long 0x00 26. " XOFF ,Transmitter off" "0,1" bitfld.long 0x00 25. " MRTS ,Manual Request to Send" "0,1" bitfld.long 0x00 24. " TPOLC ,IrDA TX Polarity Change" "0,1" bitfld.long 0x00 23. " RPOLC ,IrDA RX Polarity Change" "0,1" newline bitfld.long 0x00 22. " FCPOL ,Flow Control Pin Polarity" "0,1" bitfld.long 0x00 19. " SB ,Set Break" "0,1" bitfld.long 0x00 18. " FFE ,Force Framing Error on Transmit" "0,1" bitfld.long 0x00 17. " FPE ,Force Parity Error on Transmit" "0,1" newline bitfld.long 0x00 16. " STP ,Sticky Parity" "0,1" bitfld.long 0x00 15. " EPS ,Even Parity Select" "0,1" bitfld.long 0x00 14. " PEN ,Parity Enable" "0,1" bitfld.long 0x00 13. " STBH ,Stop Bits (Half Bit Time)" "0,1" newline bitfld.long 0x00 12. " STB ,Stop Bits" "0,1" bitfld.long 0x00 8.--9. " WLS ,Word Length Select" "0,1,2,3" bitfld.long 0x00 4.--5. " MOD ,Mode of Operation" "0,1,2,3" bitfld.long 0x00 1. " LOOP_EN ,Loopback Enable" "0,1" newline bitfld.long 0x00 0. " EN ,Enable UART" "0,1" group.long 0x4++0x3 line.long 0x00 "UART1_STAT,UART1 Status Register" bitfld.long 0x00 17. " RFCS ,Receive FIFO Count Status" "0,1" bitfld.long 0x00 16. " CTS ,Clear to Send" "0,1" bitfld.long 0x00 12. " SCTS ,Sticky CTS" "0,1" bitfld.long 0x00 11. " RO ,Reception On-going" "0,1" newline bitfld.long 0x00 10. " ADDR ,Address Bit Status" "0,1" bitfld.long 0x00 9. " ASTKY ,Address Sticky" "0,1" bitfld.long 0x00 8. " TFI ,Transmission Finished Indicator" "0,1" bitfld.long 0x00 7. " TEMT ,TSR and THR Empty" "0,1" newline bitfld.long 0x00 5. " THRE ,Transmit Hold Register Empty" "0,1" bitfld.long 0x00 4. " BI ,Break Indicator" "0,1" bitfld.long 0x00 3. " FE ,Framing Error" "0,1" bitfld.long 0x00 2. " PE ,Parity Error" "0,1" newline bitfld.long 0x00 1. " OE ,Overrun Error" "0,1" bitfld.long 0x00 0. " DR ,Data Ready" "0,1" group.long 0x8++0x3 line.long 0x00 "UART1_SCR,UART1 Scratch Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Stored 8-bit Data" group.long 0xC++0x3 line.long 0x00 "UART1_CLK,UART1 Clock Rate Register" bitfld.long 0x00 31. " EDBO ,Enable Divide By One" "0,1" hexmask.long.word 0x00 0.--15. 1. " DIV ,Divisor" group.long 0x10++0x3 line.long 0x00 "UART1_IMSK,UART1 Interrupt Mask Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Status" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Status" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Status" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Status" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Status" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Status" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Status" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Status" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Status" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Status" "0,1" group.long 0x14++0x3 line.long 0x00 "UART1_IMSK_SET,UART1 Interrupt Mask Set Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Set" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Set" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Set" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Set" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Set" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Set" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Set" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Set" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Set" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Set" "0,1" group.long 0x18++0x3 line.long 0x00 "UART1_IMSK_CLR,UART1 Interrupt Mask Clear Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Clear" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Clear" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Clear" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Clear" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Clear" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Clear" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Clear" "0,1" group.long 0x1C++0x3 line.long 0x00 "UART1_RBR,UART1 Receive Buffer Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8-bit data" group.long 0x20++0x3 line.long 0x00 "UART1_THR,UART1 Transmit Hold Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8 bit data" group.long 0x24++0x3 line.long 0x00 "UART1_TAIP,UART1 Transmit Address/Insert Pulse Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8-bit data" group.long 0x28++0x3 line.long 0x00 "UART1_TSR,UART1 Transmit Shift Register" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Contents of TSR" group.long 0x2C++0x3 line.long 0x00 "UART1_RSR,UART1 Receive Shift Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Contents of RSR" group.long 0x30++0x3 line.long 0x00 "UART1_TXCNT,UART1 Transmit Counter Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Counter Value" group.long 0x34++0x3 line.long 0x00 "UART1_RXCNT,UART1 Receive Counter Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Counter Value" tree.end tree "UART2" base ad:0x31003804 width 16. group.long 0x0++0x3 line.long 0x00 "UART2_CTL,UART2 Control Register" bitfld.long 0x00 30. " RFRT ,Receive FIFO RTS Threshold" "0,1" bitfld.long 0x00 29. " RFIT ,Receive FIFO IRQ Threshold" "0,1" bitfld.long 0x00 28. " ACTS ,Automatic CTS" "0,1" bitfld.long 0x00 27. " ARTS ,Automatic RTS" "0,1" newline bitfld.long 0x00 26. " XOFF ,Transmitter off" "0,1" bitfld.long 0x00 25. " MRTS ,Manual Request to Send" "0,1" bitfld.long 0x00 24. " TPOLC ,IrDA TX Polarity Change" "0,1" bitfld.long 0x00 23. " RPOLC ,IrDA RX Polarity Change" "0,1" newline bitfld.long 0x00 22. " FCPOL ,Flow Control Pin Polarity" "0,1" bitfld.long 0x00 19. " SB ,Set Break" "0,1" bitfld.long 0x00 18. " FFE ,Force Framing Error on Transmit" "0,1" bitfld.long 0x00 17. " FPE ,Force Parity Error on Transmit" "0,1" newline bitfld.long 0x00 16. " STP ,Sticky Parity" "0,1" bitfld.long 0x00 15. " EPS ,Even Parity Select" "0,1" bitfld.long 0x00 14. " PEN ,Parity Enable" "0,1" bitfld.long 0x00 13. " STBH ,Stop Bits (Half Bit Time)" "0,1" newline bitfld.long 0x00 12. " STB ,Stop Bits" "0,1" bitfld.long 0x00 8.--9. " WLS ,Word Length Select" "0,1,2,3" bitfld.long 0x00 4.--5. " MOD ,Mode of Operation" "0,1,2,3" bitfld.long 0x00 1. " LOOP_EN ,Loopback Enable" "0,1" newline bitfld.long 0x00 0. " EN ,Enable UART" "0,1" group.long 0x4++0x3 line.long 0x00 "UART2_STAT,UART2 Status Register" bitfld.long 0x00 17. " RFCS ,Receive FIFO Count Status" "0,1" bitfld.long 0x00 16. " CTS ,Clear to Send" "0,1" bitfld.long 0x00 12. " SCTS ,Sticky CTS" "0,1" bitfld.long 0x00 11. " RO ,Reception On-going" "0,1" newline bitfld.long 0x00 10. " ADDR ,Address Bit Status" "0,1" bitfld.long 0x00 9. " ASTKY ,Address Sticky" "0,1" bitfld.long 0x00 8. " TFI ,Transmission Finished Indicator" "0,1" bitfld.long 0x00 7. " TEMT ,TSR and THR Empty" "0,1" newline bitfld.long 0x00 5. " THRE ,Transmit Hold Register Empty" "0,1" bitfld.long 0x00 4. " BI ,Break Indicator" "0,1" bitfld.long 0x00 3. " FE ,Framing Error" "0,1" bitfld.long 0x00 2. " PE ,Parity Error" "0,1" newline bitfld.long 0x00 1. " OE ,Overrun Error" "0,1" bitfld.long 0x00 0. " DR ,Data Ready" "0,1" group.long 0x8++0x3 line.long 0x00 "UART2_SCR,UART2 Scratch Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,Stored 8-bit Data" group.long 0xC++0x3 line.long 0x00 "UART2_CLK,UART2 Clock Rate Register" bitfld.long 0x00 31. " EDBO ,Enable Divide By One" "0,1" hexmask.long.word 0x00 0.--15. 1. " DIV ,Divisor" group.long 0x10++0x3 line.long 0x00 "UART2_IMSK,UART2 Interrupt Mask Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Status" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Status" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Status" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Status" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Status" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Status" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Status" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Status" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Status" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Status" "0,1" group.long 0x14++0x3 line.long 0x00 "UART2_IMSK_SET,UART2 Interrupt Mask Set Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Set" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Set" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Set" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Set" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Set" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Set" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Set" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Set" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Set" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Set" "0,1" group.long 0x18++0x3 line.long 0x00 "UART2_IMSK_CLR,UART2 Interrupt Mask Clear Register" bitfld.long 0x00 9. " ETXS ,Enable TX to Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 8. " ERXS ,Enable RX to Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 7. " EAWI ,Enable Address Word Interrupt Mask Clear" "0,1" bitfld.long 0x00 6. " ERFCI ,Enable Receive FIFO Count Interrupt Mask Clear" "0,1" newline bitfld.long 0x00 5. " ETFI ,Enable Transmission Finished Interrupt Mask Clear" "0,1" bitfld.long 0x00 4. " EDTPTI ,Enable DMA TX Peripheral Triggered Interrupt Mask Clear" "0,1" bitfld.long 0x00 3. " EDSSI ,Enable Modem Status Interrupt Mask Clear" "0,1" bitfld.long 0x00 2. " ELSI ,Enable Line Status Interrupt Mask Clear" "0,1" newline bitfld.long 0x00 1. " ETBEI ,Enable Transmit Buffer Empty Interrupt Mask Clear" "0,1" bitfld.long 0x00 0. " ERBFI ,Enable Receive Buffer Full Interrupt Mask Clear" "0,1" group.long 0x1C++0x3 line.long 0x00 "UART2_RBR,UART2 Receive Buffer Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8-bit data" group.long 0x20++0x3 line.long 0x00 "UART2_THR,UART2 Transmit Hold Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8 bit data" group.long 0x24++0x3 line.long 0x00 "UART2_TAIP,UART2 Transmit Address/Insert Pulse Register" hexmask.long.byte 0x00 0.--7. 1. " VALUE ,8-bit data" group.long 0x28++0x3 line.long 0x00 "UART2_TSR,UART2 Transmit Shift Register" hexmask.long.word 0x00 0.--10. 1. " VALUE ,Contents of TSR" group.long 0x2C++0x3 line.long 0x00 "UART2_RSR,UART2 Receive Shift Register" hexmask.long.word 0x00 0.--9. 1. " VALUE ,Contents of RSR" group.long 0x30++0x3 line.long 0x00 "UART2_TXCNT,UART2 Transmit Counter Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Counter Value" group.long 0x34++0x3 line.long 0x00 "UART2_RXCNT,UART2 Receive Counter Register" hexmask.long.word 0x00 0.--15. 1. " VALUE ,16-bit Counter Value" tree.end tree.end tree "USB (Universal Serial Bus)" tree "USB0" base ad:0x310C1000 width 23. group.byte 0x0++0x0 line.byte 0x00 "USB0_FADDR,USB0 Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Function Address Value" group.byte 0x1++0x0 line.byte 0x00 "USB0_POWER,USB0 Power and Device Control Register" bitfld.byte 0x00 7. " ISOUPDT ,ISO Update Enable" "0,1" bitfld.byte 0x00 6. " SOFTCONN ,Soft Connect/Disconnect Enable" "0,1" bitfld.byte 0x00 5. " HSEN ,High-Speed Mode Enable" "0,1" bitfld.byte 0x00 4. " HSMODE ,High-Speed Mode" "0,1" newline bitfld.byte 0x00 3. " RESET ,Reset USB" "0,1" bitfld.byte 0x00 2. " RESUME ,Resume Mode" "0,1" bitfld.byte 0x00 1. " SUSPEND ,Suspend Mode" "0,1" bitfld.byte 0x00 0. " SUSEN ,SUSPENDM Output Enable" "0,1" group.word 0x2++0x1 line.word 0x00 "USB0_INTRTX,USB0 Transmit Interrupt Register" bitfld.word 0x00 11. " EP11 ,Endpoint 11 Tx Interrupt" "0,1" bitfld.word 0x00 10. " EP10 ,Endpoint 10 Tx Interrupt" "0,1" bitfld.word 0x00 9. " EP9 ,Endpoint 9 Tx Interrupt" "0,1" bitfld.word 0x00 8. " EP8 ,Endpoint 8 Tx Interrupt" "0,1" newline bitfld.word 0x00 7. " EP7 ,Endpoint 7 Tx Interrupt" "0,1" bitfld.word 0x00 6. " EP6 ,Endpoint 6 Tx Interrupt" "0,1" bitfld.word 0x00 5. " EP5 ,Endpoint 5 Tx Interrupt" "0,1" bitfld.word 0x00 4. " EP4 ,Endpoint 4 Tx Interrupt" "0,1" newline bitfld.word 0x00 3. " EP3 ,Endpoint 3 Tx Interrupt" "0,1" bitfld.word 0x00 2. " EP2 ,Endpoint 2 Tx Interrupt" "0,1" bitfld.word 0x00 1. " EP1 ,Endpoint 1 Tx Interrupt" "0,1" bitfld.word 0x00 0. " EP0 ,Endpoint 0 Tx Interrupt" "0,1" group.word 0x4++0x1 line.word 0x00 "USB0_INTRRX,USB0 Receive Interrupt Register" bitfld.word 0x00 11. " EP11 ,Endpoint 11 Rx Interrupt" "0,1" bitfld.word 0x00 10. " EP10 ,Endpoint 10 Rx Interrupt" "0,1" bitfld.word 0x00 9. " EP9 ,Endpoint 9 Rx Interrupt" "0,1" bitfld.word 0x00 8. " EP8 ,Endpoint 8 Rx Interrupt" "0,1" newline bitfld.word 0x00 7. " EP7 ,Endpoint 7 Rx Interrupt" "0,1" bitfld.word 0x00 6. " EP6 ,Endpoint 6 Rx Interrupt" "0,1" bitfld.word 0x00 5. " EP5 ,Endpoint 5 Rx Interrupt" "0,1" bitfld.word 0x00 4. " EP4 ,Endpoint 4 Rx Interrupt" "0,1" newline bitfld.word 0x00 3. " EP3 ,Endpoint 3 Rx Interrupt" "0,1" bitfld.word 0x00 2. " EP2 ,Endpoint 2 Rx Interrupt" "0,1" bitfld.word 0x00 1. " EP1 ,Endpoint 1 Rx Interrupt" "0,1" group.word 0x6++0x1 line.word 0x00 "USB0_INTRTXE,USB0 Transmit Interrupt Enable Register" bitfld.word 0x00 11. " EP11 ,Endpoint 11 Tx Interrupt Enable" "0,1" bitfld.word 0x00 10. " EP10 ,Endpoint 10 Tx Interrupt Enable" "0,1" bitfld.word 0x00 9. " EP9 ,Endpoint 9 Tx Interrupt Enable" "0,1" bitfld.word 0x00 8. " EP8 ,Endpoint 8 Tx Interrupt Enable" "0,1" newline bitfld.word 0x00 7. " EP7 ,Endpoint 7 Tx Interrupt Enable" "0,1" bitfld.word 0x00 6. " EP6 ,Endpoint 6 Tx Interrupt Enable" "0,1" bitfld.word 0x00 5. " EP5 ,Endpoint 5 Tx Interrupt Enable" "0,1" bitfld.word 0x00 4. " EP4 ,Endpoint 4 Tx Interrupt Enable" "0,1" newline bitfld.word 0x00 3. " EP3 ,Endpoint 3 Tx Interrupt Enable" "0,1" bitfld.word 0x00 2. " EP2 ,Endpoint 2 Tx Interrupt Enable" "0,1" bitfld.word 0x00 1. " EP1 ,Endpoint 1 Tx Interrupt Enable" "0,1" bitfld.word 0x00 0. " EP0 ,Endpoint 0 Tx Interrupt Enable" "0,1" group.word 0x8++0x1 line.word 0x00 "USB0_INTRRXE,USB0 Receive Interrupt Enable Register" bitfld.word 0x00 11. " EP11 ,Endpoint 11 Rx Interrupt Enable" "0,1" bitfld.word 0x00 10. " EP10 ,Endpoint 10 Rx Interrupt Enable" "0,1" bitfld.word 0x00 9. " EP9 ,Endpoint 9 Rx Interrupt Enable" "0,1" bitfld.word 0x00 8. " EP8 ,Endpoint 8 Rx Interrupt Enable" "0,1" newline bitfld.word 0x00 7. " EP7 ,Endpoint 7 Rx Interrupt Enable" "0,1" bitfld.word 0x00 6. " EP6 ,Endpoint 6 Rx Interrupt Enable" "0,1" bitfld.word 0x00 5. " EP5 ,Endpoint 5 Rx Interrupt Enable" "0,1" bitfld.word 0x00 4. " EP4 ,Endpoint 4 Rx Interrupt Enable" "0,1" newline bitfld.word 0x00 3. " EP3 ,Endpoint 3 Rx Interrupt Enable" "0,1" bitfld.word 0x00 2. " EP2 ,Endpoint 2 Rx Interrupt Enable" "0,1" bitfld.word 0x00 1. " EP1 ,Endpoint 1 Rx Interrupt Enable" "0,1" group.byte 0xA++0x0 line.byte 0x00 "USB0_IRQ,USB0 Common Interrupts Register" bitfld.byte 0x00 7. " VBUSERR ,VBUS Threshold Indicator" "0,1" bitfld.byte 0x00 6. " SESSREQ ,Session Request Indicator" "0,1" bitfld.byte 0x00 5. " DISCON ,Disconnect Indicator" "0,1" bitfld.byte 0x00 4. " CON ,Connection Indicator" "0,1" newline bitfld.byte 0x00 3. " SOF ,Start of Frame Indicator" "0,1" bitfld.byte 0x00 2. " RSTBABBLE ,Reset/Babble Indicator" "0,1" bitfld.byte 0x00 1. " RESUME ,Resume Indicator" "0,1" bitfld.byte 0x00 0. " SUSPEND ,Suspend Indicator" "0,1" group.byte 0xB++0x0 line.byte 0x00 "USB0_IEN,USB0 Common Interrupts Enable Register" bitfld.byte 0x00 7. " VBUSERR ,VBUS Threshold Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 6. " SESSREQ ,Session Request Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 5. " DISCON ,Disconnect Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 4. " CON ,Connection Indicator Interrupt Enable" "0,1" newline bitfld.byte 0x00 3. " SOF ,Start of Frame Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 2. " RSTBABBLE ,Reset/Babble Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 1. " RESUME ,Resume Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 0. " SUSPEND ,Suspend Indicator Interrupt Enable" "0,1" group.word 0xC++0x1 line.word 0x00 "USB0_FRAME,USB0 Frame Number Register" hexmask.word 0x00 0.--10. 1. " VALUE ,Frame Number Value" group.byte 0xE++0x0 line.byte 0x00 "USB0_INDEX,USB0 Index Register" bitfld.byte 0x00 0.--3. " EP ,Endpoint Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xF++0x0 line.byte 0x00 "USB0_TESTMODE,USB0 Testmode Register" bitfld.byte 0x00 6. " FIFOACCESS ,FIFO Access" "0,1" bitfld.byte 0x00 3. " TESTPACKET ,Test_Packet Mode" "0,1" bitfld.byte 0x00 2. " TESTK ,Test_K Mode" "0,1" bitfld.byte 0x00 1. " TESTJ ,Test_J Mode" "0,1" newline bitfld.byte 0x00 0. " TESTSE0NAK ,Test SE0 NAK" "0,1" group.word 0x10++0x1 line.word 0x00 "USB0_EPI0_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x12++0x1 line.word 0x00 "USB0_EP0I_CSR0_H,USB0 EP0 Configuration and Status (Host) Register" bitfld.word 0x00 11. " DISPING ,Disable Ping" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 7. " NAKTO ,NAK Timeout" "0,1" bitfld.word 0x00 6. " STATUSPKT ,Status Packet" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " TOERR ,Timeout Error" "0,1" newline bitfld.word 0x00 3. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 2. " RXSTALL ,Rx Stall" "0,1" bitfld.word 0x00 1. " TXPKTRDY ,Tx Packet Ready" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x12++0x1 line.word 0x00 "USB0_EP0I_CSR0_P,USB0 EP0 Configuration and Status (Peripheral) Register" bitfld.word 0x00 8. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 7. " SSETUPEND ,Service Setup End" "0,1" bitfld.word 0x00 6. " SPKTRDY ,Service Rx Packet Ready" "0,1" bitfld.word 0x00 5. " SENDSTALL ,Send Stall" "0,1" newline bitfld.word 0x00 4. " SETUPEND ,Setup End" "0,1" bitfld.word 0x00 3. " DATAEND ,Data End" "0,1" bitfld.word 0x00 2. " SENTSTALL ,Sent Stall" "0,1" bitfld.word 0x00 1. " TXPKTRDY ,Tx Packet Ready" "0,1" newline bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x12++0x1 line.word 0x00 "USB0_EPI0_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x12++0x1 line.word 0x00 "USB0_EPI0_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x14++0x1 line.word 0x00 "USB0_EPI0_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x16++0x1 line.word 0x00 "USB0_EPI0_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x16++0x1 line.word 0x00 "USB0_EPI0_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x18++0x1 line.word 0x00 "USB0_EP0I_CNT0,USB0 EP0 Number of Received Bytes Register" hexmask.word.byte 0x00 0.--6. 1. " RXCNT ,Rx Byte Count Value" group.word 0x18++0x1 line.word 0x00 "USB0_EPI0_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x1A++0x0 line.byte 0x00 "USB0_EP0I_TYPE0,USB0 EP0 Connection Type Register" bitfld.byte 0x00 0.--1. " SPEED ,Speed of Operation Value" "0,1,2,3" group.byte 0x1A++0x0 line.byte 0x00 "USB0_EPI0_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1B++0x0 line.byte 0x00 "USB0_EPI0_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x1B++0x0 line.byte 0x00 "USB0_EP0I_NAKLIMIT0,USB0 EP0 NAK Limit Register" bitfld.byte 0x00 0.--4. " VALUE ,Endpoint 0 Timeout Value (in Frames)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.byte 0x1C++0x0 line.byte 0x00 "USB0_EPI0_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1D++0x0 line.byte 0x00 "USB0_EPI0_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0x1F++0x0 line.byte 0x00 "USB0_EP0I_CFGDATA0,USB0 EP0 Configuration Information Register" bitfld.byte 0x00 7. " MPRX ,Multi-Packet Aggregate for Rx Enable" "0,1" bitfld.byte 0x00 6. " MPTX ,Multi-Packet Split for Tx Enable" "0,1" bitfld.byte 0x00 5. " BIGEND ,Big Endian Data" "0,1" bitfld.byte 0x00 4. " HBRX ,High-Bandwidth Rx Enable" "0,1" newline bitfld.byte 0x00 3. " HBTX ,High-Bandwidth Tx Enable" "0,1" bitfld.byte 0x00 2. " DYNFIFO ,Dynamic FIFO Size Enable" "0,1" bitfld.byte 0x00 1. " SOFTCON ,Soft Connect Enable" "0,1" bitfld.byte 0x00 0. " UTMIWID ,UTMI Data Width" "0,1" group.long 0x20++0x3 line.long 0x00 "USB0_FIFO0,USB0 FIFO Word (32-Bit) Register" group.byte 0x20++0x0 line.byte 0x00 "USB0_FIFOB0,USB0 FIFO Byte (8-Bit) Register" group.word 0x20++0x1 line.word 0x00 "USB0_EPI1_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x20++0x1 line.word 0x00 "USB0_FIFOH0,USB0 FIFO Half-Word (16-Bit) Register" group.word 0x22++0x1 line.word 0x00 "USB0_EPI1_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x22++0x1 line.word 0x00 "USB0_EPI1_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x24++0x1 line.word 0x00 "USB0_FIFOH1,USB0 FIFO Half-Word (16-Bit) Register" group.word 0x24++0x1 line.word 0x00 "USB0_EPI1_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x24++0x0 line.byte 0x00 "USB0_FIFOB1,USB0 FIFO Byte (8-Bit) Register" group.long 0x24++0x3 line.long 0x00 "USB0_FIFO1,USB0 FIFO Word (32-Bit) Register" group.word 0x26++0x1 line.word 0x00 "USB0_EPI1_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x26++0x1 line.word 0x00 "USB0_EPI1_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x28++0x0 line.byte 0x00 "USB0_FIFOB2,USB0 FIFO Byte (8-Bit) Register" group.word 0x28++0x1 line.word 0x00 "USB0_FIFOH2,USB0 FIFO Half-Word (16-Bit) Register" group.word 0x28++0x1 line.word 0x00 "USB0_EPI1_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.long 0x28++0x3 line.long 0x00 "USB0_FIFO2,USB0 FIFO Word (32-Bit) Register" group.byte 0x2A++0x0 line.byte 0x00 "USB0_EPI1_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x2B++0x0 line.byte 0x00 "USB0_EPI1_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.long 0x2C++0x3 line.long 0x00 "USB0_FIFO3,USB0 FIFO Word (32-Bit) Register" group.word 0x2C++0x1 line.word 0x00 "USB0_FIFOH3,USB0 FIFO Half-Word (16-Bit) Register" group.byte 0x2C++0x0 line.byte 0x00 "USB0_EPI1_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x2C++0x0 line.byte 0x00 "USB0_FIFOB3,USB0 FIFO Byte (8-Bit) Register" group.byte 0x2D++0x0 line.byte 0x00 "USB0_EPI1_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x30++0x1 line.word 0x00 "USB0_EPI2_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x30++0x1 line.word 0x00 "USB0_FIFOH4,USB0 FIFO Half-Word (16-Bit) Register" group.long 0x30++0x3 line.long 0x00 "USB0_FIFO4,USB0 FIFO Word (32-Bit) Register" group.byte 0x30++0x0 line.byte 0x00 "USB0_FIFOB4,USB0 FIFO Byte (8-Bit) Register" group.word 0x32++0x1 line.word 0x00 "USB0_EPI2_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x32++0x1 line.word 0x00 "USB0_EPI2_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x34++0x1 line.word 0x00 "USB0_FIFOH5,USB0 FIFO Half-Word (16-Bit) Register" group.byte 0x34++0x0 line.byte 0x00 "USB0_FIFOB5,USB0 FIFO Byte (8-Bit) Register" group.long 0x34++0x3 line.long 0x00 "USB0_FIFO5,USB0 FIFO Word (32-Bit) Register" group.word 0x34++0x1 line.word 0x00 "USB0_EPI2_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x36++0x1 line.word 0x00 "USB0_EPI2_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x36++0x1 line.word 0x00 "USB0_EPI2_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x38++0x0 line.byte 0x00 "USB0_FIFOB6,USB0 FIFO Byte (8-Bit) Register" group.word 0x38++0x1 line.word 0x00 "USB0_FIFOH6,USB0 FIFO Half-Word (16-Bit) Register" group.word 0x38++0x1 line.word 0x00 "USB0_EPI2_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.long 0x38++0x3 line.long 0x00 "USB0_FIFO6,USB0 FIFO Word (32-Bit) Register" group.byte 0x3A++0x0 line.byte 0x00 "USB0_EPI2_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x3B++0x0 line.byte 0x00 "USB0_EPI2_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.long 0x3C++0x3 line.long 0x00 "USB0_FIFO7,USB0 FIFO Word (32-Bit) Register" group.byte 0x3C++0x0 line.byte 0x00 "USB0_EPI2_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x3C++0x1 line.word 0x00 "USB0_FIFOH7,USB0 FIFO Half-Word (16-Bit) Register" group.byte 0x3C++0x0 line.byte 0x00 "USB0_FIFOB7,USB0 FIFO Byte (8-Bit) Register" group.byte 0x3D++0x0 line.byte 0x00 "USB0_EPI2_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x40++0x1 line.word 0x00 "USB0_EPI3_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x40++0x0 line.byte 0x00 "USB0_FIFOB8,USB0 FIFO Byte (8-Bit) Register" group.long 0x40++0x3 line.long 0x00 "USB0_FIFO8,USB0 FIFO Word (32-Bit) Register" group.word 0x40++0x1 line.word 0x00 "USB0_FIFOH8,USB0 FIFO Half-Word (16-Bit) Register" group.word 0x42++0x1 line.word 0x00 "USB0_EPI3_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x42++0x1 line.word 0x00 "USB0_EPI3_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x44++0x1 line.word 0x00 "USB0_EPI3_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x44++0x1 line.word 0x00 "USB0_FIFOH9,USB0 FIFO Half-Word (16-Bit) Register" group.byte 0x44++0x0 line.byte 0x00 "USB0_FIFOB9,USB0 FIFO Byte (8-Bit) Register" group.long 0x44++0x3 line.long 0x00 "USB0_FIFO9,USB0 FIFO Word (32-Bit) Register" group.word 0x46++0x1 line.word 0x00 "USB0_EPI3_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x46++0x1 line.word 0x00 "USB0_EPI3_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x48++0x1 line.word 0x00 "USB0_FIFOH10,USB0 FIFO Half-Word (16-Bit) Register" group.byte 0x48++0x0 line.byte 0x00 "USB0_FIFOB10,USB0 FIFO Byte (8-Bit) Register" group.long 0x48++0x3 line.long 0x00 "USB0_FIFO10,USB0 FIFO Word (32-Bit) Register" group.word 0x48++0x1 line.word 0x00 "USB0_EPI3_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x4A++0x0 line.byte 0x00 "USB0_EPI3_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x4B++0x0 line.byte 0x00 "USB0_EPI3_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.word 0x4C++0x1 line.word 0x00 "USB0_FIFOH11,USB0 FIFO Half-Word (16-Bit) Register" group.long 0x4C++0x3 line.long 0x00 "USB0_FIFO11,USB0 FIFO Word (32-Bit) Register" group.byte 0x4C++0x0 line.byte 0x00 "USB0_FIFOB11,USB0 FIFO Byte (8-Bit) Register" group.byte 0x4C++0x0 line.byte 0x00 "USB0_EPI3_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x4D++0x0 line.byte 0x00 "USB0_EPI3_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x50++0x1 line.word 0x00 "USB0_EPI4_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x52++0x1 line.word 0x00 "USB0_EPI4_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x52++0x1 line.word 0x00 "USB0_EPI4_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x54++0x1 line.word 0x00 "USB0_EPI4_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x56++0x1 line.word 0x00 "USB0_EPI4_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x56++0x1 line.word 0x00 "USB0_EPI4_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x58++0x1 line.word 0x00 "USB0_EPI4_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x5A++0x0 line.byte 0x00 "USB0_EPI4_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x5B++0x0 line.byte 0x00 "USB0_EPI4_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x5C++0x0 line.byte 0x00 "USB0_EPI4_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x5D++0x0 line.byte 0x00 "USB0_EPI4_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x60++0x1 line.word 0x00 "USB0_EPI5_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x60++0x0 line.byte 0x00 "USB0_DEV_CTL,USB0 Device Control Register" bitfld.byte 0x00 7. " BDEVICE ,A or B Devices Indicator" "0,1" bitfld.byte 0x00 6. " FSDEV ,Full or High-Speed Indicator" "0,1" bitfld.byte 0x00 5. " LSDEV ,Low-Speed Indicator" "0,1" bitfld.byte 0x00 3.--4. " VBUS ,VBUS Level Indicator" "0,1,2,3" newline bitfld.byte 0x00 2. " HOSTMODE ,Host Mode Indicator" "0,1" bitfld.byte 0x00 1. " HOSTREQ ,Host Negotiation Request" "0,1" bitfld.byte 0x00 0. " SESSION ,Session Indicator" "0,1" group.byte 0x62++0x0 line.byte 0x00 "USB0_TXFIFOSZ,USB0 Transmit FIFO Size Register" bitfld.byte 0x00 4. " DPB ,Double Packet Buffering Enable" "0,1" bitfld.byte 0x00 0.--3. " SZ ,Maximum Packet Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x62++0x1 line.word 0x00 "USB0_EPI5_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x62++0x1 line.word 0x00 "USB0_EPI5_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0x63++0x0 line.byte 0x00 "USB0_RXFIFOSZ,USB0 Receive FIFO Size Register" bitfld.byte 0x00 4. " DPB ,Double Packet Buffering Enable" "0,1" bitfld.byte 0x00 0.--3. " SZ ,Maximum Packet Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x64++0x1 line.word 0x00 "USB0_TXFIFOADDR,USB0 Transmit FIFO Address Register" hexmask.word 0x00 0.--12. 1. " VALUE ,Tx FIFO Start Address" group.word 0x64++0x1 line.word 0x00 "USB0_EPI5_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x66++0x1 line.word 0x00 "USB0_EPI5_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x66++0x1 line.word 0x00 "USB0_RXFIFOADDR,USB0 Receive FIFO Address Register" hexmask.word 0x00 0.--12. 1. " VALUE ,Rx FIFO Start Address" group.word 0x66++0x1 line.word 0x00 "USB0_EPI5_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x68++0x1 line.word 0x00 "USB0_EPI5_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x6A++0x0 line.byte 0x00 "USB0_EPI5_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x6B++0x0 line.byte 0x00 "USB0_EPI5_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x6C++0x0 line.byte 0x00 "USB0_EPI5_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x6D++0x0 line.byte 0x00 "USB0_EPI5_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x70++0x1 line.word 0x00 "USB0_EPI6_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x72++0x1 line.word 0x00 "USB0_EPI6_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x72++0x1 line.word 0x00 "USB0_EPI6_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x74++0x1 line.word 0x00 "USB0_EPI6_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x76++0x1 line.word 0x00 "USB0_EPI6_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x76++0x1 line.word 0x00 "USB0_EPI6_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x78++0x1 line.word 0x00 "USB0_EPI6_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x78++0x0 line.byte 0x00 "USB0_EPINFO,USB0 Endpoint Information Register" bitfld.byte 0x00 4.--7. " RXEP ,Rx Endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " TXEP ,Tx Endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x79++0x0 line.byte 0x00 "USB0_RAMINFO,USB0 RAM Information Register" bitfld.byte 0x00 4.--7. " DMACHANS ,DMA Channels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " RAMBITS ,RAM Address Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x7A++0x0 line.byte 0x00 "USB0_EPI6_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x7A++0x0 line.byte 0x00 "USB0_LINKINFO,USB0 Link Information Register" bitfld.byte 0x00 4.--7. " WTCON ,Wait for Connect/Disconnect" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " WTID ,Wait from ID Pull-up" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x7B++0x0 line.byte 0x00 "USB0_EPI6_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x7B++0x0 line.byte 0x00 "USB0_VPLEN,USB0 VBUS Pulse Length Register" group.byte 0x7C++0x0 line.byte 0x00 "USB0_HS_EOF1,USB0 High-Speed EOF 1 Register" group.byte 0x7C++0x0 line.byte 0x00 "USB0_EPI6_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x7D++0x0 line.byte 0x00 "USB0_EPI6_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0x7D++0x0 line.byte 0x00 "USB0_FS_EOF1,USB0 Full-Speed EOF 1 Register" group.byte 0x7E++0x0 line.byte 0x00 "USB0_LS_EOF1,USB0 Low-Speed EOF 1 Register" group.byte 0x7F++0x0 line.byte 0x00 "USB0_SOFT_RST,USB0 Software Reset Register" bitfld.byte 0x00 1. " RSTX ,Reset USB XCLK Domain" "0,1" bitfld.byte 0x00 0. " RST ,Reset USB CLK Domain" "0,1" group.word 0x80++0x1 line.word 0x00 "USB0_EPI7_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x80++0x0 line.byte 0x00 "USB0_MP0_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0x82++0x1 line.word 0x00 "USB0_EPI7_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x82++0x1 line.word 0x00 "USB0_EPI7_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0x82++0x0 line.byte 0x00 "USB0_MP0_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x83++0x0 line.byte 0x00 "USB0_MP0_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x84++0x0 line.byte 0x00 "USB0_MP0_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0x84++0x1 line.word 0x00 "USB0_EPI7_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x86++0x1 line.word 0x00 "USB0_EPI7_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x86++0x0 line.byte 0x00 "USB0_MP0_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0x86++0x1 line.word 0x00 "USB0_EPI7_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x87++0x0 line.byte 0x00 "USB0_MP0_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x88++0x0 line.byte 0x00 "USB0_MP1_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0x88++0x1 line.word 0x00 "USB0_EPI7_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x8A++0x0 line.byte 0x00 "USB0_MP1_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x8A++0x0 line.byte 0x00 "USB0_EPI7_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x8B++0x0 line.byte 0x00 "USB0_MP1_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x8B++0x0 line.byte 0x00 "USB0_EPI7_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x8C++0x0 line.byte 0x00 "USB0_MP1_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0x8C++0x0 line.byte 0x00 "USB0_EPI7_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x8D++0x0 line.byte 0x00 "USB0_EPI7_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0x8E++0x0 line.byte 0x00 "USB0_MP1_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x8F++0x0 line.byte 0x00 "USB0_MP1_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x90++0x0 line.byte 0x00 "USB0_MP2_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0x90++0x1 line.word 0x00 "USB0_EPI8_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x92++0x1 line.word 0x00 "USB0_EPI8_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x92++0x1 line.word 0x00 "USB0_EPI8_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0x92++0x0 line.byte 0x00 "USB0_MP2_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x93++0x0 line.byte 0x00 "USB0_MP2_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x94++0x0 line.byte 0x00 "USB0_MP2_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0x94++0x1 line.word 0x00 "USB0_EPI8_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x96++0x1 line.word 0x00 "USB0_EPI8_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x96++0x0 line.byte 0x00 "USB0_MP2_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0x96++0x1 line.word 0x00 "USB0_EPI8_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x97++0x0 line.byte 0x00 "USB0_MP2_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0x98++0x1 line.word 0x00 "USB0_EPI8_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x98++0x0 line.byte 0x00 "USB0_MP3_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.byte 0x9A++0x0 line.byte 0x00 "USB0_EPI8_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x9A++0x0 line.byte 0x00 "USB0_MP3_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x9B++0x0 line.byte 0x00 "USB0_EPI8_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x9B++0x0 line.byte 0x00 "USB0_MP3_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x9C++0x0 line.byte 0x00 "USB0_EPI8_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x9C++0x0 line.byte 0x00 "USB0_MP3_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0x9D++0x0 line.byte 0x00 "USB0_EPI8_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0x9E++0x0 line.byte 0x00 "USB0_MP3_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x9F++0x0 line.byte 0x00 "USB0_MP3_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0xA0++0x1 line.word 0x00 "USB0_EPI9_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xA0++0x0 line.byte 0x00 "USB0_MP4_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xA2++0x1 line.word 0x00 "USB0_EPI9_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0xA2++0x0 line.byte 0x00 "USB0_MP4_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0xA2++0x1 line.word 0x00 "USB0_EPI9_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0xA3++0x0 line.byte 0x00 "USB0_MP4_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0xA4++0x1 line.word 0x00 "USB0_EPI9_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xA4++0x0 line.byte 0x00 "USB0_MP4_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0xA6++0x1 line.word 0x00 "USB0_EPI9_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0xA6++0x1 line.word 0x00 "USB0_EPI9_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0xA6++0x0 line.byte 0x00 "USB0_MP4_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xA7++0x0 line.byte 0x00 "USB0_MP4_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xA8++0x0 line.byte 0x00 "USB0_MP5_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xA8++0x1 line.word 0x00 "USB0_EPI9_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0xAA++0x0 line.byte 0x00 "USB0_MP5_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xAA++0x0 line.byte 0x00 "USB0_EPI9_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xAB++0x0 line.byte 0x00 "USB0_EPI9_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0xAB++0x0 line.byte 0x00 "USB0_MP5_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xAC++0x0 line.byte 0x00 "USB0_EPI9_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xAC++0x0 line.byte 0x00 "USB0_MP5_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xAD++0x0 line.byte 0x00 "USB0_EPI9_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0xAE++0x0 line.byte 0x00 "USB0_MP5_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xAF++0x0 line.byte 0x00 "USB0_MP5_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0xB0++0x1 line.word 0x00 "USB0_EPI10_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xB0++0x0 line.byte 0x00 "USB0_MP6_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xB2++0x1 line.word 0x00 "USB0_EPI10_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0xB2++0x1 line.word 0x00 "USB0_EPI10_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0xB2++0x0 line.byte 0x00 "USB0_MP6_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xB3++0x0 line.byte 0x00 "USB0_MP6_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xB4++0x0 line.byte 0x00 "USB0_MP6_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0xB4++0x1 line.word 0x00 "USB0_EPI10_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0xB6++0x1 line.word 0x00 "USB0_EPI10_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0xB6++0x1 line.word 0x00 "USB0_EPI10_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0xB6++0x0 line.byte 0x00 "USB0_MP6_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xB7++0x0 line.byte 0x00 "USB0_MP6_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xB8++0x0 line.byte 0x00 "USB0_MP7_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xB8++0x1 line.word 0x00 "USB0_EPI10_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0xBA++0x0 line.byte 0x00 "USB0_EPI10_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xBA++0x0 line.byte 0x00 "USB0_MP7_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xBB++0x0 line.byte 0x00 "USB0_MP7_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xBB++0x0 line.byte 0x00 "USB0_EPI10_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0xBC++0x0 line.byte 0x00 "USB0_EPI10_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xBC++0x0 line.byte 0x00 "USB0_MP7_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xBD++0x0 line.byte 0x00 "USB0_EPI10_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0xBE++0x0 line.byte 0x00 "USB0_MP7_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xBF++0x0 line.byte 0x00 "USB0_MP7_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xC0++0x0 line.byte 0x00 "USB0_MP8_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xC0++0x1 line.word 0x00 "USB0_EPI11_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xC2++0x0 line.byte 0x00 "USB0_MP8_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0xC2++0x1 line.word 0x00 "USB0_EPI11_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0xC2++0x1 line.word 0x00 "USB0_EPI11_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0xC3++0x0 line.byte 0x00 "USB0_MP8_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0xC4++0x1 line.word 0x00 "USB0_EPI11_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xC4++0x0 line.byte 0x00 "USB0_MP8_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0xC6++0x1 line.word 0x00 "USB0_EPI11_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0xC6++0x0 line.byte 0x00 "USB0_MP8_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0xC6++0x1 line.word 0x00 "USB0_EPI11_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0xC7++0x0 line.byte 0x00 "USB0_MP8_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xC8++0x0 line.byte 0x00 "USB0_MP9_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xC8++0x1 line.word 0x00 "USB0_EPI11_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0xCA++0x0 line.byte 0x00 "USB0_EPI11_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xCA++0x0 line.byte 0x00 "USB0_MP9_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xCB++0x0 line.byte 0x00 "USB0_MP9_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xCB++0x0 line.byte 0x00 "USB0_EPI11_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0xCC++0x0 line.byte 0x00 "USB0_MP9_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xCC++0x0 line.byte 0x00 "USB0_EPI11_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xCD++0x0 line.byte 0x00 "USB0_EPI11_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0xCE++0x0 line.byte 0x00 "USB0_MP9_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xCF++0x0 line.byte 0x00 "USB0_MP9_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xD0++0x0 line.byte 0x00 "USB0_MP10_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.byte 0xD2++0x0 line.byte 0x00 "USB0_MP10_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xD3++0x0 line.byte 0x00 "USB0_MP10_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xD4++0x0 line.byte 0x00 "USB0_MP10_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xD6++0x0 line.byte 0x00 "USB0_MP10_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xD7++0x0 line.byte 0x00 "USB0_MP10_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xD8++0x0 line.byte 0x00 "USB0_MP11_TXFUNCADDR,USB0 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.byte 0xDA++0x0 line.byte 0x00 "USB0_MP11_TXHUBADDR,USB0 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xDB++0x0 line.byte 0x00 "USB0_MP11_TXHUBPORT,USB0 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xDC++0x0 line.byte 0x00 "USB0_MP11_RXFUNCADDR,USB0 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xDE++0x0 line.byte 0x00 "USB0_MP11_RXHUBADDR,USB0 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xDF++0x0 line.byte 0x00 "USB0_MP11_RXHUBPORT,USB0 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0x100++0x1 line.word 0x00 "USB0_EP0_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x102++0x1 line.word 0x00 "USB0_EP0_CSR0_H,USB0 EP0 Configuration and Status (Host) Register" bitfld.word 0x00 11. " DISPING ,Disable Ping" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 7. " NAKTO ,NAK Timeout" "0,1" bitfld.word 0x00 6. " STATUSPKT ,Status Packet" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " TOERR ,Timeout Error" "0,1" newline bitfld.word 0x00 3. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 2. " RXSTALL ,Rx Stall" "0,1" bitfld.word 0x00 1. " TXPKTRDY ,Tx Packet Ready" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x102++0x1 line.word 0x00 "USB0_EP0_CSR0_P,USB0 EP0 Configuration and Status (Peripheral) Register" bitfld.word 0x00 8. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 7. " SSETUPEND ,Service Setup End" "0,1" bitfld.word 0x00 6. " SPKTRDY ,Service Rx Packet Ready" "0,1" bitfld.word 0x00 5. " SENDSTALL ,Send Stall" "0,1" newline bitfld.word 0x00 4. " SETUPEND ,Setup End" "0,1" bitfld.word 0x00 3. " DATAEND ,Data End" "0,1" bitfld.word 0x00 2. " SENTSTALL ,Sent Stall" "0,1" bitfld.word 0x00 1. " TXPKTRDY ,Tx Packet Ready" "0,1" newline bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x102++0x1 line.word 0x00 "USB0_EP0_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x102++0x1 line.word 0x00 "USB0_EP0_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x104++0x1 line.word 0x00 "USB0_EP0_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x106++0x1 line.word 0x00 "USB0_EP0_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x106++0x1 line.word 0x00 "USB0_EP0_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x108++0x1 line.word 0x00 "USB0_EP0_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.word 0x108++0x1 line.word 0x00 "USB0_EP0_CNT0,USB0 EP0 Number of Received Bytes Register" hexmask.word.byte 0x00 0.--6. 1. " RXCNT ,Rx Byte Count Value" group.byte 0x10A++0x0 line.byte 0x00 "USB0_EP0_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x10A++0x0 line.byte 0x00 "USB0_EP0_TYPE0,USB0 EP0 Connection Type Register" bitfld.byte 0x00 0.--1. " SPEED ,Speed of Operation Value" "0,1,2,3" group.byte 0x10B++0x0 line.byte 0x00 "USB0_EP0_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x10B++0x0 line.byte 0x00 "USB0_EP0_NAKLIMIT0,USB0 EP0 NAK Limit Register" bitfld.byte 0x00 0.--4. " VALUE ,Endpoint 0 Timeout Value (in Frames)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.byte 0x10C++0x0 line.byte 0x00 "USB0_EP0_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x10D++0x0 line.byte 0x00 "USB0_EP0_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0x10F++0x0 line.byte 0x00 "USB0_EP0_CFGDATA0,USB0 EP0 Configuration Information Register" bitfld.byte 0x00 7. " MPRX ,Multi-Packet Aggregate for Rx Enable" "0,1" bitfld.byte 0x00 6. " MPTX ,Multi-Packet Split for Tx Enable" "0,1" bitfld.byte 0x00 5. " BIGEND ,Big Endian Data" "0,1" bitfld.byte 0x00 4. " HBRX ,High-Bandwidth Rx Enable" "0,1" newline bitfld.byte 0x00 3. " HBTX ,High-Bandwidth Tx Enable" "0,1" bitfld.byte 0x00 2. " DYNFIFO ,Dynamic FIFO Size Enable" "0,1" bitfld.byte 0x00 1. " SOFTCON ,Soft Connect Enable" "0,1" bitfld.byte 0x00 0. " UTMIWID ,UTMI Data Width" "0,1" group.word 0x110++0x1 line.word 0x00 "USB0_EP1_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x112++0x1 line.word 0x00 "USB0_EP1_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x112++0x1 line.word 0x00 "USB0_EP1_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x114++0x1 line.word 0x00 "USB0_EP1_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x116++0x1 line.word 0x00 "USB0_EP1_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x116++0x1 line.word 0x00 "USB0_EP1_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x118++0x1 line.word 0x00 "USB0_EP1_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x11A++0x0 line.byte 0x00 "USB0_EP1_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x11B++0x0 line.byte 0x00 "USB0_EP1_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x11C++0x0 line.byte 0x00 "USB0_EP1_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x11D++0x0 line.byte 0x00 "USB0_EP1_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x120++0x1 line.word 0x00 "USB0_EP2_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x122++0x1 line.word 0x00 "USB0_EP2_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x122++0x1 line.word 0x00 "USB0_EP2_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x124++0x1 line.word 0x00 "USB0_EP2_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x126++0x1 line.word 0x00 "USB0_EP2_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x126++0x1 line.word 0x00 "USB0_EP2_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x128++0x1 line.word 0x00 "USB0_EP2_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x12A++0x0 line.byte 0x00 "USB0_EP2_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x12B++0x0 line.byte 0x00 "USB0_EP2_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x12C++0x0 line.byte 0x00 "USB0_EP2_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x12D++0x0 line.byte 0x00 "USB0_EP2_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x130++0x1 line.word 0x00 "USB0_EP3_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x132++0x1 line.word 0x00 "USB0_EP3_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x132++0x1 line.word 0x00 "USB0_EP3_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x134++0x1 line.word 0x00 "USB0_EP3_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x136++0x1 line.word 0x00 "USB0_EP3_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x136++0x1 line.word 0x00 "USB0_EP3_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x138++0x1 line.word 0x00 "USB0_EP3_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x13A++0x0 line.byte 0x00 "USB0_EP3_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x13B++0x0 line.byte 0x00 "USB0_EP3_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x13C++0x0 line.byte 0x00 "USB0_EP3_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x13D++0x0 line.byte 0x00 "USB0_EP3_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x140++0x1 line.word 0x00 "USB0_EP4_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x142++0x1 line.word 0x00 "USB0_EP4_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x142++0x1 line.word 0x00 "USB0_EP4_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x144++0x1 line.word 0x00 "USB0_EP4_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x146++0x1 line.word 0x00 "USB0_EP4_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x146++0x1 line.word 0x00 "USB0_EP4_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x148++0x1 line.word 0x00 "USB0_EP4_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x14A++0x0 line.byte 0x00 "USB0_EP4_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x14B++0x0 line.byte 0x00 "USB0_EP4_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x14C++0x0 line.byte 0x00 "USB0_EP4_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x14D++0x0 line.byte 0x00 "USB0_EP4_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x150++0x1 line.word 0x00 "USB0_EP5_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x152++0x1 line.word 0x00 "USB0_EP5_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x152++0x1 line.word 0x00 "USB0_EP5_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x154++0x1 line.word 0x00 "USB0_EP5_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x156++0x1 line.word 0x00 "USB0_EP5_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x156++0x1 line.word 0x00 "USB0_EP5_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x158++0x1 line.word 0x00 "USB0_EP5_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x15A++0x0 line.byte 0x00 "USB0_EP5_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x15B++0x0 line.byte 0x00 "USB0_EP5_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x15C++0x0 line.byte 0x00 "USB0_EP5_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x15D++0x0 line.byte 0x00 "USB0_EP5_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x160++0x1 line.word 0x00 "USB0_EP6_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x162++0x1 line.word 0x00 "USB0_EP6_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x162++0x1 line.word 0x00 "USB0_EP6_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x164++0x1 line.word 0x00 "USB0_EP6_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x166++0x1 line.word 0x00 "USB0_EP6_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x166++0x1 line.word 0x00 "USB0_EP6_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x168++0x1 line.word 0x00 "USB0_EP6_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x16A++0x0 line.byte 0x00 "USB0_EP6_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x16B++0x0 line.byte 0x00 "USB0_EP6_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x16C++0x0 line.byte 0x00 "USB0_EP6_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x16D++0x0 line.byte 0x00 "USB0_EP6_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x170++0x1 line.word 0x00 "USB0_EP7_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x172++0x1 line.word 0x00 "USB0_EP7_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x172++0x1 line.word 0x00 "USB0_EP7_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x174++0x1 line.word 0x00 "USB0_EP7_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x176++0x1 line.word 0x00 "USB0_EP7_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x176++0x1 line.word 0x00 "USB0_EP7_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x178++0x1 line.word 0x00 "USB0_EP7_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x17A++0x0 line.byte 0x00 "USB0_EP7_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x17B++0x0 line.byte 0x00 "USB0_EP7_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x17C++0x0 line.byte 0x00 "USB0_EP7_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x17D++0x0 line.byte 0x00 "USB0_EP7_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x180++0x1 line.word 0x00 "USB0_EP8_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x182++0x1 line.word 0x00 "USB0_EP8_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x182++0x1 line.word 0x00 "USB0_EP8_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x184++0x1 line.word 0x00 "USB0_EP8_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x186++0x1 line.word 0x00 "USB0_EP8_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x186++0x1 line.word 0x00 "USB0_EP8_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x188++0x1 line.word 0x00 "USB0_EP8_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x18A++0x0 line.byte 0x00 "USB0_EP8_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x18B++0x0 line.byte 0x00 "USB0_EP8_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x18C++0x0 line.byte 0x00 "USB0_EP8_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x18D++0x0 line.byte 0x00 "USB0_EP8_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x190++0x1 line.word 0x00 "USB0_EP9_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x192++0x1 line.word 0x00 "USB0_EP9_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x192++0x1 line.word 0x00 "USB0_EP9_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x194++0x1 line.word 0x00 "USB0_EP9_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x196++0x1 line.word 0x00 "USB0_EP9_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x196++0x1 line.word 0x00 "USB0_EP9_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x198++0x1 line.word 0x00 "USB0_EP9_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x19A++0x0 line.byte 0x00 "USB0_EP9_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x19B++0x0 line.byte 0x00 "USB0_EP9_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x19C++0x0 line.byte 0x00 "USB0_EP9_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x19D++0x0 line.byte 0x00 "USB0_EP9_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x1A0++0x1 line.word 0x00 "USB0_EP10_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x1A2++0x1 line.word 0x00 "USB0_EP10_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x1A2++0x1 line.word 0x00 "USB0_EP10_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x1A4++0x1 line.word 0x00 "USB0_EP10_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x1A6++0x1 line.word 0x00 "USB0_EP10_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x1A6++0x1 line.word 0x00 "USB0_EP10_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x1A8++0x1 line.word 0x00 "USB0_EP10_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x1AA++0x0 line.byte 0x00 "USB0_EP10_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1AB++0x0 line.byte 0x00 "USB0_EP10_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x1AC++0x0 line.byte 0x00 "USB0_EP10_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1AD++0x0 line.byte 0x00 "USB0_EP10_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.word 0x1B0++0x1 line.word 0x00 "USB0_EP11_TXMAXP,USB0 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x1B2++0x1 line.word 0x00 "USB0_EP11_TXCSR_H,USB0 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x1B2++0x1 line.word 0x00 "USB0_EP11_TXCSR_P,USB0 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x1B4++0x1 line.word 0x00 "USB0_EP11_RXMAXP,USB0 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x1B6++0x1 line.word 0x00 "USB0_EP11_RXCSR_H,USB0 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x1B6++0x1 line.word 0x00 "USB0_EP11_RXCSR_P,USB0 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x1B8++0x1 line.word 0x00 "USB0_EP11_RXCNT,USB0 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x1BA++0x0 line.byte 0x00 "USB0_EP11_TXTYPE,USB0 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1BB++0x0 line.byte 0x00 "USB0_EP11_TXINTERVAL,USB0 EPn Transmit Polling Interval Register" group.byte 0x1BC++0x0 line.byte 0x00 "USB0_EP11_RXTYPE,USB0 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1BD++0x0 line.byte 0x00 "USB0_EP11_RXINTERVAL,USB0 EPn Receive Polling Interval Register" group.byte 0x200++0x0 line.byte 0x00 "USB0_DMA_IRQ,USB0 DMA Interrupt Register" bitfld.byte 0x00 7. " D7 ,DMA 7 Interrupt Pending Status" "0,1" bitfld.byte 0x00 6. " D6 ,DMA 6 Interrupt Pending Status" "0,1" bitfld.byte 0x00 5. " D5 ,DMA 5 Interrupt Pending Status" "0,1" bitfld.byte 0x00 4. " D4 ,DMA 4 Interrupt Pending Status" "0,1" newline bitfld.byte 0x00 3. " D3 ,DMA 3 Interrupt Pending Status" "0,1" bitfld.byte 0x00 2. " D2 ,DMA 2 Interrupt Pending Status" "0,1" bitfld.byte 0x00 1. " D1 ,DMA 1 Interrupt Pending Status" "0,1" bitfld.byte 0x00 0. " D0 ,DMA 0 Interrupt Pending Status" "0,1" group.word 0x204++0x1 line.word 0x00 "USB0_DMA0_CTL,USB0 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x208++0x3 line.long 0x00 "USB0_DMA0_ADDR,USB0 DMA Channel n Address Register" group.long 0x20C++0x3 line.long 0x00 "USB0_DMA0_CNT,USB0 DMA Channel n Count Register" group.word 0x214++0x1 line.word 0x00 "USB0_DMA1_CTL,USB0 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x218++0x3 line.long 0x00 "USB0_DMA1_ADDR,USB0 DMA Channel n Address Register" group.long 0x21C++0x3 line.long 0x00 "USB0_DMA1_CNT,USB0 DMA Channel n Count Register" group.word 0x224++0x1 line.word 0x00 "USB0_DMA2_CTL,USB0 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x228++0x3 line.long 0x00 "USB0_DMA2_ADDR,USB0 DMA Channel n Address Register" group.long 0x22C++0x3 line.long 0x00 "USB0_DMA2_CNT,USB0 DMA Channel n Count Register" group.word 0x234++0x1 line.word 0x00 "USB0_DMA3_CTL,USB0 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x238++0x3 line.long 0x00 "USB0_DMA3_ADDR,USB0 DMA Channel n Address Register" group.long 0x23C++0x3 line.long 0x00 "USB0_DMA3_CNT,USB0 DMA Channel n Count Register" group.word 0x244++0x1 line.word 0x00 "USB0_DMA4_CTL,USB0 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x248++0x3 line.long 0x00 "USB0_DMA4_ADDR,USB0 DMA Channel n Address Register" group.long 0x24C++0x3 line.long 0x00 "USB0_DMA4_CNT,USB0 DMA Channel n Count Register" group.word 0x254++0x1 line.word 0x00 "USB0_DMA5_CTL,USB0 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x258++0x3 line.long 0x00 "USB0_DMA5_ADDR,USB0 DMA Channel n Address Register" group.long 0x25C++0x3 line.long 0x00 "USB0_DMA5_CNT,USB0 DMA Channel n Count Register" group.word 0x264++0x1 line.word 0x00 "USB0_DMA6_CTL,USB0 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x268++0x3 line.long 0x00 "USB0_DMA6_ADDR,USB0 DMA Channel n Address Register" group.long 0x26C++0x3 line.long 0x00 "USB0_DMA6_CNT,USB0 DMA Channel n Count Register" group.word 0x274++0x1 line.word 0x00 "USB0_DMA7_CTL,USB0 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x278++0x3 line.long 0x00 "USB0_DMA7_ADDR,USB0 DMA Channel n Address Register" group.long 0x27C++0x3 line.long 0x00 "USB0_DMA7_CNT,USB0 DMA Channel n Count Register" group.word 0x300++0x1 line.word 0x00 "USB0_RQPKTCNT0,USB0 EPn Request Packet Count Register" group.word 0x304++0x1 line.word 0x00 "USB0_RQPKTCNT1,USB0 EPn Request Packet Count Register" group.word 0x308++0x1 line.word 0x00 "USB0_RQPKTCNT2,USB0 EPn Request Packet Count Register" group.word 0x30C++0x1 line.word 0x00 "USB0_RQPKTCNT3,USB0 EPn Request Packet Count Register" group.word 0x310++0x1 line.word 0x00 "USB0_RQPKTCNT4,USB0 EPn Request Packet Count Register" group.word 0x314++0x1 line.word 0x00 "USB0_RQPKTCNT5,USB0 EPn Request Packet Count Register" group.word 0x318++0x1 line.word 0x00 "USB0_RQPKTCNT6,USB0 EPn Request Packet Count Register" group.word 0x31C++0x1 line.word 0x00 "USB0_RQPKTCNT7,USB0 EPn Request Packet Count Register" group.word 0x320++0x1 line.word 0x00 "USB0_RQPKTCNT8,USB0 EPn Request Packet Count Register" group.word 0x324++0x1 line.word 0x00 "USB0_RQPKTCNT9,USB0 EPn Request Packet Count Register" group.word 0x328++0x1 line.word 0x00 "USB0_RQPKTCNT10,USB0 EPn Request Packet Count Register" group.word 0x344++0x1 line.word 0x00 "USB0_CT_UCH,USB0 Chirp Timeout Register" hexmask.word 0x00 0.--14. 1. " VALUE ,Chirp Timeout Value" group.word 0x346++0x1 line.word 0x00 "USB0_CT_HHSRTN,USB0 Host High-Speed Return to Normal Register" hexmask.word 0x00 0.--14. 1. " VALUE ,Host High-Speed Return to Normal Value" group.word 0x348++0x1 line.word 0x00 "USB0_CT_HSBT,USB0 High-Speed Timeout Register" bitfld.word 0x00 0.--3. " VALUE ,HS Timeout Adder" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x360++0x1 line.word 0x00 "USB0_LPM_ATTR,USB0 LPM Attribute Register" bitfld.word 0x00 12.--15. " EP ,Endpoint" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 8. " RMTWAK ,Remote Wakeup Enable" "0,1" bitfld.word 0x00 4.--7. " HIRD ,Host Initiated Resume Duration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 0.--3. " LINKSTATE ,Link State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x362++0x0 line.byte 0x00 "USB0_LPM_CTL,USB0 LPM Control Register" bitfld.byte 0x00 4. " NAK ,LPM NAK Enable" "0,1" bitfld.byte 0x00 2.--3. " EN ,LPM Enable" "0,1,2,3" bitfld.byte 0x00 1. " RESUME ,LPM Resume (Remote Wakeup)" "0,1" bitfld.byte 0x00 0. " TX ,LPM Transmit" "0,1" group.byte 0x363++0x0 line.byte 0x00 "USB0_LPM_IEN,USB0 LPM Interrupt Enable Register" bitfld.byte 0x00 5. " LPMERR ,LPM Error Interrupt Enable" "0,1" bitfld.byte 0x00 4. " LPMRES ,LPM Resume Interrupt Enable" "0,1" bitfld.byte 0x00 3. " LPMNC ,LPM NYET Control Interrupt Enable" "0,1" bitfld.byte 0x00 2. " LPMACK ,LPM ACK Interrupt Enable" "0,1" newline bitfld.byte 0x00 1. " LPMNY ,LPM NYET Interrupt Enable" "0,1" bitfld.byte 0x00 0. " LPMST ,LPM STALL Interrupt Enable" "0,1" group.byte 0x364++0x0 line.byte 0x00 "USB0_LPM_IRQ,USB0 LPM Interrupt Status Register" bitfld.byte 0x00 5. " LPMERR ,LPM Error Interrupt" "0,1" bitfld.byte 0x00 4. " LPMRES ,LPM Resume Interrupt" "0,1" bitfld.byte 0x00 3. " LPMNC ,LPM NYET Control Interrupt" "0,1" bitfld.byte 0x00 2. " LPMACK ,LPM ACK Interrupt" "0,1" newline bitfld.byte 0x00 1. " LPMNY ,LPM NYET Interrupt" "0,1" bitfld.byte 0x00 0. " LPMST ,LPM STALL Interrupt" "0,1" group.byte 0x365++0x0 line.byte 0x00 "USB0_LPM_FADDR,USB0 LPM Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Function Address Value" group.byte 0x380++0x0 line.byte 0x00 "USB0_VBUS_CTL,USB0 VBUS Control Register" bitfld.byte 0x00 4. " DRV ,VBUS Drive" "0,1" bitfld.byte 0x00 3. " DRVINT ,VBUS Drive Interrupt" "0,1" bitfld.byte 0x00 2. " DRVIEN ,VBUS Drive Interrupt Enable" "0,1" bitfld.byte 0x00 1. " DRVOD ,VBUS Drive Open Drain" "0,1" newline bitfld.byte 0x00 0. " INVDRV ,VBUS Invert Drive" "0,1" group.byte 0x381++0x0 line.byte 0x00 "USB0_BAT_CHG,USB0 Battery Charging Control Register" bitfld.byte 0x00 4. " DEDCHG ,Dedicated Charging Port" "0,1" bitfld.byte 0x00 3. " CHGDET ,Charging Port Detected" "0,1" bitfld.byte 0x00 2. " SNSCHGDET ,Sense Charger Detection" "0,1" bitfld.byte 0x00 1. " CONDET ,Connected Detected" "0,1" newline bitfld.byte 0x00 0. " SNSCONDET ,Sense Connection Detection" "0,1" group.byte 0x382++0x0 line.byte 0x00 "USB0_IDCTL,USB0 ID Control" bitfld.byte 0x00 1. " IDVAL ,ID Value" "0,1" bitfld.byte 0x00 0. " IDSEL ,ID Select" "0,1" group.byte 0x394++0x0 line.byte 0x00 "USB0_PHY_CTL,USB0 PHY Control Register" bitfld.byte 0x00 7. " EN ,PHY Enable" "0,1" bitfld.byte 0x00 4. " DIS ,Disable PHY" "0,1" bitfld.byte 0x00 1. " RESTORE ,Restore from Hibernate" "0,1" bitfld.byte 0x00 0. " HIBER ,Hibernate" "0,1" group.word 0x398++0x1 line.word 0x00 "USB0_PLL_OSC,USB0 PLL and Oscillator Control Register" bitfld.word 0x00 14. " PLLSTABLE ,PLL Stable" "0,1" bitfld.word 0x00 7. " PLLMSEL ,PLL Multiplier Select" "0,1" bitfld.word 0x00 1.--6. " PLLM ,PLL Multiplier Value" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63" bitfld.word 0x00 0. " DIVCLKIN ,Divide CLKIN" "0,1" tree.end sif !cpuis("ADSP-SC584")&&!cpuis("ADSP-SC584W") tree "USB1" base ad:0x310C2000 width 23. group.byte 0x0++0x0 line.byte 0x00 "USB1_FADDR,USB1 Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Function Address Value" group.byte 0x1++0x0 line.byte 0x00 "USB1_POWER,USB1 Power and Device Control Register" bitfld.byte 0x00 7. " ISOUPDT ,ISO Update Enable" "0,1" bitfld.byte 0x00 6. " SOFTCONN ,Soft Connect/Disconnect Enable" "0,1" bitfld.byte 0x00 5. " HSEN ,High-Speed Mode Enable" "0,1" bitfld.byte 0x00 4. " HSMODE ,High-Speed Mode" "0,1" newline bitfld.byte 0x00 3. " RESET ,Reset USB" "0,1" bitfld.byte 0x00 2. " RESUME ,Resume Mode" "0,1" bitfld.byte 0x00 1. " SUSPEND ,Suspend Mode" "0,1" bitfld.byte 0x00 0. " SUSEN ,SUSPENDM Output Enable" "0,1" group.word 0x2++0x1 line.word 0x00 "USB1_INTRTX,USB1 Transmit Interrupt Register" bitfld.word 0x00 11. " EP11 ,Endpoint 11 Tx Interrupt" "0,1" bitfld.word 0x00 10. " EP10 ,Endpoint 10 Tx Interrupt" "0,1" bitfld.word 0x00 9. " EP9 ,Endpoint 9 Tx Interrupt" "0,1" bitfld.word 0x00 8. " EP8 ,Endpoint 8 Tx Interrupt" "0,1" newline bitfld.word 0x00 7. " EP7 ,Endpoint 7 Tx Interrupt" "0,1" bitfld.word 0x00 6. " EP6 ,Endpoint 6 Tx Interrupt" "0,1" bitfld.word 0x00 5. " EP5 ,Endpoint 5 Tx Interrupt" "0,1" bitfld.word 0x00 4. " EP4 ,Endpoint 4 Tx Interrupt" "0,1" newline bitfld.word 0x00 3. " EP3 ,Endpoint 3 Tx Interrupt" "0,1" bitfld.word 0x00 2. " EP2 ,Endpoint 2 Tx Interrupt" "0,1" bitfld.word 0x00 1. " EP1 ,Endpoint 1 Tx Interrupt" "0,1" bitfld.word 0x00 0. " EP0 ,Endpoint 0 Tx Interrupt" "0,1" group.word 0x4++0x1 line.word 0x00 "USB1_INTRRX,USB1 Receive Interrupt Register" bitfld.word 0x00 11. " EP11 ,Endpoint 11 Rx Interrupt" "0,1" bitfld.word 0x00 10. " EP10 ,Endpoint 10 Rx Interrupt" "0,1" bitfld.word 0x00 9. " EP9 ,Endpoint 9 Rx Interrupt" "0,1" bitfld.word 0x00 8. " EP8 ,Endpoint 8 Rx Interrupt" "0,1" newline bitfld.word 0x00 7. " EP7 ,Endpoint 7 Rx Interrupt" "0,1" bitfld.word 0x00 6. " EP6 ,Endpoint 6 Rx Interrupt" "0,1" bitfld.word 0x00 5. " EP5 ,Endpoint 5 Rx Interrupt" "0,1" bitfld.word 0x00 4. " EP4 ,Endpoint 4 Rx Interrupt" "0,1" newline bitfld.word 0x00 3. " EP3 ,Endpoint 3 Rx Interrupt" "0,1" bitfld.word 0x00 2. " EP2 ,Endpoint 2 Rx Interrupt" "0,1" bitfld.word 0x00 1. " EP1 ,Endpoint 1 Rx Interrupt" "0,1" group.word 0x6++0x1 line.word 0x00 "USB1_INTRTXE,USB1 Transmit Interrupt Enable Register" bitfld.word 0x00 11. " EP11 ,Endpoint 11 Tx Interrupt Enable" "0,1" bitfld.word 0x00 10. " EP10 ,Endpoint 10 Tx Interrupt Enable" "0,1" bitfld.word 0x00 9. " EP9 ,Endpoint 9 Tx Interrupt Enable" "0,1" bitfld.word 0x00 8. " EP8 ,Endpoint 8 Tx Interrupt Enable" "0,1" newline bitfld.word 0x00 7. " EP7 ,Endpoint 7 Tx Interrupt Enable" "0,1" bitfld.word 0x00 6. " EP6 ,Endpoint 6 Tx Interrupt Enable" "0,1" bitfld.word 0x00 5. " EP5 ,Endpoint 5 Tx Interrupt Enable" "0,1" bitfld.word 0x00 4. " EP4 ,Endpoint 4 Tx Interrupt Enable" "0,1" newline bitfld.word 0x00 3. " EP3 ,Endpoint 3 Tx Interrupt Enable" "0,1" bitfld.word 0x00 2. " EP2 ,Endpoint 2 Tx Interrupt Enable" "0,1" bitfld.word 0x00 1. " EP1 ,Endpoint 1 Tx Interrupt Enable" "0,1" bitfld.word 0x00 0. " EP0 ,Endpoint 0 Tx Interrupt Enable" "0,1" group.word 0x8++0x1 line.word 0x00 "USB1_INTRRXE,USB1 Receive Interrupt Enable Register" bitfld.word 0x00 11. " EP11 ,Endpoint 11 Rx Interrupt Enable" "0,1" bitfld.word 0x00 10. " EP10 ,Endpoint 10 Rx Interrupt Enable" "0,1" bitfld.word 0x00 9. " EP9 ,Endpoint 9 Rx Interrupt Enable" "0,1" bitfld.word 0x00 8. " EP8 ,Endpoint 8 Rx Interrupt Enable" "0,1" newline bitfld.word 0x00 7. " EP7 ,Endpoint 7 Rx Interrupt Enable" "0,1" bitfld.word 0x00 6. " EP6 ,Endpoint 6 Rx Interrupt Enable" "0,1" bitfld.word 0x00 5. " EP5 ,Endpoint 5 Rx Interrupt Enable" "0,1" bitfld.word 0x00 4. " EP4 ,Endpoint 4 Rx Interrupt Enable" "0,1" newline bitfld.word 0x00 3. " EP3 ,Endpoint 3 Rx Interrupt Enable" "0,1" bitfld.word 0x00 2. " EP2 ,Endpoint 2 Rx Interrupt Enable" "0,1" bitfld.word 0x00 1. " EP1 ,Endpoint 1 Rx Interrupt Enable" "0,1" group.byte 0xA++0x0 line.byte 0x00 "USB1_IRQ,USB1 Common Interrupts Register" bitfld.byte 0x00 7. " VBUSERR ,VBUS Threshold Indicator" "0,1" bitfld.byte 0x00 6. " SESSREQ ,Session Request Indicator" "0,1" bitfld.byte 0x00 5. " DISCON ,Disconnect Indicator" "0,1" bitfld.byte 0x00 4. " CON ,Connection Indicator" "0,1" newline bitfld.byte 0x00 3. " SOF ,Start of Frame Indicator" "0,1" bitfld.byte 0x00 2. " RSTBABBLE ,Reset/Babble Indicator" "0,1" bitfld.byte 0x00 1. " RESUME ,Resume Indicator" "0,1" bitfld.byte 0x00 0. " SUSPEND ,Suspend Indicator" "0,1" group.byte 0xB++0x0 line.byte 0x00 "USB1_IEN,USB1 Common Interrupts Enable Register" bitfld.byte 0x00 7. " VBUSERR ,VBUS Threshold Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 6. " SESSREQ ,Session Request Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 5. " DISCON ,Disconnect Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 4. " CON ,Connection Indicator Interrupt Enable" "0,1" newline bitfld.byte 0x00 3. " SOF ,Start of Frame Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 2. " RSTBABBLE ,Reset/Babble Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 1. " RESUME ,Resume Indicator Interrupt Enable" "0,1" bitfld.byte 0x00 0. " SUSPEND ,Suspend Indicator Interrupt Enable" "0,1" group.word 0xC++0x1 line.word 0x00 "USB1_FRAME,USB1 Frame Number Register" hexmask.word 0x00 0.--10. 1. " VALUE ,Frame Number Value" group.byte 0xE++0x0 line.byte 0x00 "USB1_INDEX,USB1 Index Register" bitfld.byte 0x00 0.--3. " EP ,Endpoint Index" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xF++0x0 line.byte 0x00 "USB1_TESTMODE,USB1 Testmode Register" bitfld.byte 0x00 6. " FIFOACCESS ,FIFO Access" "0,1" bitfld.byte 0x00 3. " TESTPACKET ,Test_Packet Mode" "0,1" bitfld.byte 0x00 2. " TESTK ,Test_K Mode" "0,1" bitfld.byte 0x00 1. " TESTJ ,Test_J Mode" "0,1" newline bitfld.byte 0x00 0. " TESTSE0NAK ,Test SE0 NAK" "0,1" group.word 0x10++0x1 line.word 0x00 "USB1_EPI0_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x12++0x1 line.word 0x00 "USB1_EPI0_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x12++0x1 line.word 0x00 "USB1_EP0I_CSR0_P,USB1 EP0 Configuration and Status (Peripheral) Register" bitfld.word 0x00 8. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 7. " SSETUPEND ,Service Setup End" "0,1" bitfld.word 0x00 6. " SPKTRDY ,Service Rx Packet Ready" "0,1" bitfld.word 0x00 5. " SENDSTALL ,Send Stall" "0,1" newline bitfld.word 0x00 4. " SETUPEND ,Setup End" "0,1" bitfld.word 0x00 3. " DATAEND ,Data End" "0,1" bitfld.word 0x00 2. " SENTSTALL ,Sent Stall" "0,1" bitfld.word 0x00 1. " TXPKTRDY ,Tx Packet Ready" "0,1" newline bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x12++0x1 line.word 0x00 "USB1_EPI0_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x12++0x1 line.word 0x00 "USB1_EP0I_CSR0_H,USB1 EP0 Configuration and Status (Host) Register" bitfld.word 0x00 11. " DISPING ,Disable Ping" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 7. " NAKTO ,NAK Timeout" "0,1" bitfld.word 0x00 6. " STATUSPKT ,Status Packet" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " TOERR ,Timeout Error" "0,1" newline bitfld.word 0x00 3. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 2. " RXSTALL ,Rx Stall" "0,1" bitfld.word 0x00 1. " TXPKTRDY ,Tx Packet Ready" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x14++0x1 line.word 0x00 "USB1_EPI0_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x16++0x1 line.word 0x00 "USB1_EPI0_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x16++0x1 line.word 0x00 "USB1_EPI0_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x18++0x1 line.word 0x00 "USB1_EPI0_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.word 0x18++0x1 line.word 0x00 "USB1_EP0I_CNT0,USB1 EP0 Number of Received Bytes Register" hexmask.word.byte 0x00 0.--6. 1. " RXCNT ,Rx Byte Count Value" group.byte 0x1A++0x0 line.byte 0x00 "USB1_EP0I_TYPE0,USB1 EP0 Connection Type Register" bitfld.byte 0x00 0.--1. " SPEED ,Speed of Operation Value" "0,1,2,3" group.byte 0x1A++0x0 line.byte 0x00 "USB1_EPI0_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1B++0x0 line.byte 0x00 "USB1_EPI0_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x1B++0x0 line.byte 0x00 "USB1_EP0I_NAKLIMIT0,USB1 EP0 NAK Limit Register" bitfld.byte 0x00 0.--4. " VALUE ,Endpoint 0 Timeout Value (in Frames)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.byte 0x1C++0x0 line.byte 0x00 "USB1_EPI0_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1D++0x0 line.byte 0x00 "USB1_EPI0_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0x1F++0x0 line.byte 0x00 "USB1_EP0I_CFGDATA0,USB1 EP0 Configuration Information Register" bitfld.byte 0x00 7. " MPRX ,Multi-Packet Aggregate for Rx Enable" "0,1" bitfld.byte 0x00 6. " MPTX ,Multi-Packet Split for Tx Enable" "0,1" bitfld.byte 0x00 5. " BIGEND ,Big Endian Data" "0,1" bitfld.byte 0x00 4. " HBRX ,High-Bandwidth Rx Enable" "0,1" newline bitfld.byte 0x00 3. " HBTX ,High-Bandwidth Tx Enable" "0,1" bitfld.byte 0x00 2. " DYNFIFO ,Dynamic FIFO Size Enable" "0,1" bitfld.byte 0x00 1. " SOFTCON ,Soft Connect Enable" "0,1" bitfld.byte 0x00 0. " UTMIWID ,UTMI Data Width" "0,1" group.word 0x20++0x1 line.word 0x00 "USB1_FIFOH0,USB1 FIFO Half-Word (16-Bit) Register" group.long 0x20++0x3 line.long 0x00 "USB1_FIFO0,USB1 FIFO Word (32-Bit) Register" group.byte 0x20++0x0 line.byte 0x00 "USB1_FIFOB0,USB1 FIFO Byte (8-Bit) Register" group.word 0x20++0x1 line.word 0x00 "USB1_EPI1_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x22++0x1 line.word 0x00 "USB1_EPI1_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x22++0x1 line.word 0x00 "USB1_EPI1_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.long 0x24++0x3 line.long 0x00 "USB1_FIFO1,USB1 FIFO Word (32-Bit) Register" group.word 0x24++0x1 line.word 0x00 "USB1_EPI1_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x24++0x0 line.byte 0x00 "USB1_FIFOB1,USB1 FIFO Byte (8-Bit) Register" group.word 0x24++0x1 line.word 0x00 "USB1_FIFOH1,USB1 FIFO Half-Word (16-Bit) Register" group.word 0x26++0x1 line.word 0x00 "USB1_EPI1_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x26++0x1 line.word 0x00 "USB1_EPI1_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.long 0x28++0x3 line.long 0x00 "USB1_FIFO2,USB1 FIFO Word (32-Bit) Register" group.word 0x28++0x1 line.word 0x00 "USB1_FIFOH2,USB1 FIFO Half-Word (16-Bit) Register" group.byte 0x28++0x0 line.byte 0x00 "USB1_FIFOB2,USB1 FIFO Byte (8-Bit) Register" group.word 0x28++0x1 line.word 0x00 "USB1_EPI1_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x2A++0x0 line.byte 0x00 "USB1_EPI1_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x2B++0x0 line.byte 0x00 "USB1_EPI1_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x2C++0x0 line.byte 0x00 "USB1_EPI1_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x2C++0x1 line.word 0x00 "USB1_FIFOH3,USB1 FIFO Half-Word (16-Bit) Register" group.byte 0x2C++0x0 line.byte 0x00 "USB1_FIFOB3,USB1 FIFO Byte (8-Bit) Register" group.long 0x2C++0x3 line.long 0x00 "USB1_FIFO3,USB1 FIFO Word (32-Bit) Register" group.byte 0x2D++0x0 line.byte 0x00 "USB1_EPI1_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x30++0x1 line.word 0x00 "USB1_EPI2_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.long 0x30++0x3 line.long 0x00 "USB1_FIFO4,USB1 FIFO Word (32-Bit) Register" group.byte 0x30++0x0 line.byte 0x00 "USB1_FIFOB4,USB1 FIFO Byte (8-Bit) Register" group.word 0x30++0x1 line.word 0x00 "USB1_FIFOH4,USB1 FIFO Half-Word (16-Bit) Register" group.word 0x32++0x1 line.word 0x00 "USB1_EPI2_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x32++0x1 line.word 0x00 "USB1_EPI2_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x34++0x1 line.word 0x00 "USB1_EPI2_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x34++0x0 line.byte 0x00 "USB1_FIFOB5,USB1 FIFO Byte (8-Bit) Register" group.word 0x34++0x1 line.word 0x00 "USB1_FIFOH5,USB1 FIFO Half-Word (16-Bit) Register" group.long 0x34++0x3 line.long 0x00 "USB1_FIFO5,USB1 FIFO Word (32-Bit) Register" group.word 0x36++0x1 line.word 0x00 "USB1_EPI2_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x36++0x1 line.word 0x00 "USB1_EPI2_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x38++0x1 line.word 0x00 "USB1_EPI2_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.long 0x38++0x3 line.long 0x00 "USB1_FIFO6,USB1 FIFO Word (32-Bit) Register" group.word 0x38++0x1 line.word 0x00 "USB1_FIFOH6,USB1 FIFO Half-Word (16-Bit) Register" group.byte 0x38++0x0 line.byte 0x00 "USB1_FIFOB6,USB1 FIFO Byte (8-Bit) Register" group.byte 0x3A++0x0 line.byte 0x00 "USB1_EPI2_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x3B++0x0 line.byte 0x00 "USB1_EPI2_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x3C++0x0 line.byte 0x00 "USB1_FIFOB7,USB1 FIFO Byte (8-Bit) Register" group.byte 0x3C++0x0 line.byte 0x00 "USB1_EPI2_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x3C++0x1 line.word 0x00 "USB1_FIFOH7,USB1 FIFO Half-Word (16-Bit) Register" group.long 0x3C++0x3 line.long 0x00 "USB1_FIFO7,USB1 FIFO Word (32-Bit) Register" group.byte 0x3D++0x0 line.byte 0x00 "USB1_EPI2_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x40++0x1 line.word 0x00 "USB1_EPI3_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x40++0x1 line.word 0x00 "USB1_FIFOH8,USB1 FIFO Half-Word (16-Bit) Register" group.byte 0x40++0x0 line.byte 0x00 "USB1_FIFOB8,USB1 FIFO Byte (8-Bit) Register" group.long 0x40++0x3 line.long 0x00 "USB1_FIFO8,USB1 FIFO Word (32-Bit) Register" group.word 0x42++0x1 line.word 0x00 "USB1_EPI3_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x42++0x1 line.word 0x00 "USB1_EPI3_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x44++0x1 line.word 0x00 "USB1_EPI3_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x44++0x0 line.byte 0x00 "USB1_FIFOB9,USB1 FIFO Byte (8-Bit) Register" group.word 0x44++0x1 line.word 0x00 "USB1_FIFOH9,USB1 FIFO Half-Word (16-Bit) Register" group.long 0x44++0x3 line.long 0x00 "USB1_FIFO9,USB1 FIFO Word (32-Bit) Register" group.word 0x46++0x1 line.word 0x00 "USB1_EPI3_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x46++0x1 line.word 0x00 "USB1_EPI3_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x48++0x0 line.byte 0x00 "USB1_FIFOB10,USB1 FIFO Byte (8-Bit) Register" group.word 0x48++0x1 line.word 0x00 "USB1_FIFOH10,USB1 FIFO Half-Word (16-Bit) Register" group.word 0x48++0x1 line.word 0x00 "USB1_EPI3_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.long 0x48++0x3 line.long 0x00 "USB1_FIFO10,USB1 FIFO Word (32-Bit) Register" group.byte 0x4A++0x0 line.byte 0x00 "USB1_EPI3_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x4B++0x0 line.byte 0x00 "USB1_EPI3_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x4C++0x0 line.byte 0x00 "USB1_FIFOB11,USB1 FIFO Byte (8-Bit) Register" group.long 0x4C++0x3 line.long 0x00 "USB1_FIFO11,USB1 FIFO Word (32-Bit) Register" group.byte 0x4C++0x0 line.byte 0x00 "USB1_EPI3_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x4C++0x1 line.word 0x00 "USB1_FIFOH11,USB1 FIFO Half-Word (16-Bit) Register" group.byte 0x4D++0x0 line.byte 0x00 "USB1_EPI3_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x50++0x1 line.word 0x00 "USB1_EPI4_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x52++0x1 line.word 0x00 "USB1_EPI4_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x52++0x1 line.word 0x00 "USB1_EPI4_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x54++0x1 line.word 0x00 "USB1_EPI4_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x56++0x1 line.word 0x00 "USB1_EPI4_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x56++0x1 line.word 0x00 "USB1_EPI4_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x58++0x1 line.word 0x00 "USB1_EPI4_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x5A++0x0 line.byte 0x00 "USB1_EPI4_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x5B++0x0 line.byte 0x00 "USB1_EPI4_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x5C++0x0 line.byte 0x00 "USB1_EPI4_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x5D++0x0 line.byte 0x00 "USB1_EPI4_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x60++0x1 line.word 0x00 "USB1_EPI5_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x60++0x0 line.byte 0x00 "USB1_DEV_CTL,USB1 Device Control Register" bitfld.byte 0x00 7. " BDEVICE ,A or B Devices Indicator" "0,1" bitfld.byte 0x00 6. " FSDEV ,Full or High-Speed Indicator" "0,1" bitfld.byte 0x00 5. " LSDEV ,Low-Speed Indicator" "0,1" bitfld.byte 0x00 3.--4. " VBUS ,VBUS Level Indicator" "0,1,2,3" newline bitfld.byte 0x00 2. " HOSTMODE ,Host Mode Indicator" "0,1" bitfld.byte 0x00 1. " HOSTREQ ,Host Negotiation Request" "0,1" bitfld.byte 0x00 0. " SESSION ,Session Indicator" "0,1" group.word 0x62++0x1 line.word 0x00 "USB1_EPI5_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0x62++0x0 line.byte 0x00 "USB1_TXFIFOSZ,USB1 Transmit FIFO Size Register" bitfld.byte 0x00 4. " DPB ,Double Packet Buffering Enable" "0,1" bitfld.byte 0x00 0.--3. " SZ ,Maximum Packet Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x62++0x1 line.word 0x00 "USB1_EPI5_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0x63++0x0 line.byte 0x00 "USB1_RXFIFOSZ,USB1 Receive FIFO Size Register" bitfld.byte 0x00 4. " DPB ,Double Packet Buffering Enable" "0,1" bitfld.byte 0x00 0.--3. " SZ ,Maximum Packet Size" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x64++0x1 line.word 0x00 "USB1_TXFIFOADDR,USB1 Transmit FIFO Address Register" hexmask.word 0x00 0.--12. 1. " VALUE ,Tx FIFO Start Address" group.word 0x64++0x1 line.word 0x00 "USB1_EPI5_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x66++0x1 line.word 0x00 "USB1_EPI5_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x66++0x1 line.word 0x00 "USB1_RXFIFOADDR,USB1 Receive FIFO Address Register" hexmask.word 0x00 0.--12. 1. " VALUE ,Rx FIFO Start Address" group.word 0x66++0x1 line.word 0x00 "USB1_EPI5_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x68++0x1 line.word 0x00 "USB1_EPI5_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x6A++0x0 line.byte 0x00 "USB1_EPI5_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x6B++0x0 line.byte 0x00 "USB1_EPI5_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x6C++0x0 line.byte 0x00 "USB1_EPI5_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x6D++0x0 line.byte 0x00 "USB1_EPI5_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x70++0x1 line.word 0x00 "USB1_EPI6_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x72++0x1 line.word 0x00 "USB1_EPI6_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x72++0x1 line.word 0x00 "USB1_EPI6_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x74++0x1 line.word 0x00 "USB1_EPI6_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x76++0x1 line.word 0x00 "USB1_EPI6_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x76++0x1 line.word 0x00 "USB1_EPI6_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x78++0x0 line.byte 0x00 "USB1_EPINFO,USB1 Endpoint Information Register" bitfld.byte 0x00 4.--7. " RXEP ,Rx Endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " TXEP ,Tx Endpoints" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x78++0x1 line.word 0x00 "USB1_EPI6_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x79++0x0 line.byte 0x00 "USB1_RAMINFO,USB1 RAM Information Register" bitfld.byte 0x00 4.--7. " DMACHANS ,DMA Channels" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " RAMBITS ,RAM Address Bits" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x7A++0x0 line.byte 0x00 "USB1_EPI6_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x7A++0x0 line.byte 0x00 "USB1_LINKINFO,USB1 Link Information Register" bitfld.byte 0x00 4.--7. " WTCON ,Wait for Connect/Disconnect" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.byte 0x00 0.--3. " WTID ,Wait from ID Pull-up" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x7B++0x0 line.byte 0x00 "USB1_VPLEN,USB1 VBUS Pulse Length Register" group.byte 0x7B++0x0 line.byte 0x00 "USB1_EPI6_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x7C++0x0 line.byte 0x00 "USB1_HS_EOF1,USB1 High-Speed EOF 1 Register" group.byte 0x7C++0x0 line.byte 0x00 "USB1_EPI6_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x7D++0x0 line.byte 0x00 "USB1_EPI6_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0x7D++0x0 line.byte 0x00 "USB1_FS_EOF1,USB1 Full-Speed EOF 1 Register" group.byte 0x7E++0x0 line.byte 0x00 "USB1_LS_EOF1,USB1 Low-Speed EOF 1 Register" group.byte 0x7F++0x0 line.byte 0x00 "USB1_SOFT_RST,USB1 Software Reset Register" bitfld.byte 0x00 1. " RSTX ,Reset USB XCLK Domain" "0,1" bitfld.byte 0x00 0. " RST ,Reset USB CLK Domain" "0,1" group.word 0x80++0x1 line.word 0x00 "USB1_EPI7_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0x80++0x0 line.byte 0x00 "USB1_MP0_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0x82++0x1 line.word 0x00 "USB1_EPI7_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x82++0x1 line.word 0x00 "USB1_EPI7_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0x82++0x0 line.byte 0x00 "USB1_MP0_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x83++0x0 line.byte 0x00 "USB1_MP0_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x84++0x0 line.byte 0x00 "USB1_MP0_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0x84++0x1 line.word 0x00 "USB1_EPI7_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x86++0x1 line.word 0x00 "USB1_EPI7_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x86++0x0 line.byte 0x00 "USB1_MP0_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0x86++0x1 line.word 0x00 "USB1_EPI7_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x87++0x0 line.byte 0x00 "USB1_MP0_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x88++0x0 line.byte 0x00 "USB1_MP1_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0x88++0x1 line.word 0x00 "USB1_EPI7_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x8A++0x0 line.byte 0x00 "USB1_MP1_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x8A++0x0 line.byte 0x00 "USB1_EPI7_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x8B++0x0 line.byte 0x00 "USB1_MP1_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x8B++0x0 line.byte 0x00 "USB1_EPI7_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x8C++0x0 line.byte 0x00 "USB1_MP1_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0x8C++0x0 line.byte 0x00 "USB1_EPI7_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x8D++0x0 line.byte 0x00 "USB1_EPI7_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0x8E++0x0 line.byte 0x00 "USB1_MP1_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x8F++0x0 line.byte 0x00 "USB1_MP1_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x90++0x0 line.byte 0x00 "USB1_MP2_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0x90++0x1 line.word 0x00 "USB1_EPI8_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x92++0x1 line.word 0x00 "USB1_EPI8_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x92++0x1 line.word 0x00 "USB1_EPI8_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0x92++0x0 line.byte 0x00 "USB1_MP2_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x93++0x0 line.byte 0x00 "USB1_MP2_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x94++0x0 line.byte 0x00 "USB1_MP2_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0x94++0x1 line.word 0x00 "USB1_EPI8_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x96++0x1 line.word 0x00 "USB1_EPI8_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x96++0x0 line.byte 0x00 "USB1_MP2_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0x96++0x1 line.word 0x00 "USB1_EPI8_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0x97++0x0 line.byte 0x00 "USB1_MP2_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0x98++0x1 line.word 0x00 "USB1_EPI8_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x98++0x0 line.byte 0x00 "USB1_MP3_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.byte 0x9A++0x0 line.byte 0x00 "USB1_EPI8_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x9A++0x0 line.byte 0x00 "USB1_MP3_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x9B++0x0 line.byte 0x00 "USB1_EPI8_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x9B++0x0 line.byte 0x00 "USB1_MP3_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0x9C++0x0 line.byte 0x00 "USB1_EPI8_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x9C++0x0 line.byte 0x00 "USB1_MP3_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0x9D++0x0 line.byte 0x00 "USB1_EPI8_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0x9E++0x0 line.byte 0x00 "USB1_MP3_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0x9F++0x0 line.byte 0x00 "USB1_MP3_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0xA0++0x1 line.word 0x00 "USB1_EPI9_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xA0++0x0 line.byte 0x00 "USB1_MP4_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xA2++0x1 line.word 0x00 "USB1_EPI9_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0xA2++0x0 line.byte 0x00 "USB1_MP4_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0xA2++0x1 line.word 0x00 "USB1_EPI9_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0xA3++0x0 line.byte 0x00 "USB1_MP4_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0xA4++0x1 line.word 0x00 "USB1_EPI9_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xA4++0x0 line.byte 0x00 "USB1_MP4_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0xA6++0x1 line.word 0x00 "USB1_EPI9_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0xA6++0x1 line.word 0x00 "USB1_EPI9_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0xA6++0x0 line.byte 0x00 "USB1_MP4_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xA7++0x0 line.byte 0x00 "USB1_MP4_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xA8++0x0 line.byte 0x00 "USB1_MP5_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xA8++0x1 line.word 0x00 "USB1_EPI9_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0xAA++0x0 line.byte 0x00 "USB1_MP5_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xAA++0x0 line.byte 0x00 "USB1_EPI9_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xAB++0x0 line.byte 0x00 "USB1_EPI9_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0xAB++0x0 line.byte 0x00 "USB1_MP5_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xAC++0x0 line.byte 0x00 "USB1_EPI9_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xAC++0x0 line.byte 0x00 "USB1_MP5_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xAD++0x0 line.byte 0x00 "USB1_EPI9_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0xAE++0x0 line.byte 0x00 "USB1_MP5_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xAF++0x0 line.byte 0x00 "USB1_MP5_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0xB0++0x1 line.word 0x00 "USB1_EPI10_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xB0++0x0 line.byte 0x00 "USB1_MP6_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xB2++0x1 line.word 0x00 "USB1_EPI10_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0xB2++0x1 line.word 0x00 "USB1_EPI10_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0xB2++0x0 line.byte 0x00 "USB1_MP6_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xB3++0x0 line.byte 0x00 "USB1_MP6_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xB4++0x0 line.byte 0x00 "USB1_MP6_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0xB4++0x1 line.word 0x00 "USB1_EPI10_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0xB6++0x1 line.word 0x00 "USB1_EPI10_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0xB6++0x1 line.word 0x00 "USB1_EPI10_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0xB6++0x0 line.byte 0x00 "USB1_MP6_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xB7++0x0 line.byte 0x00 "USB1_MP6_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xB8++0x0 line.byte 0x00 "USB1_MP7_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xB8++0x1 line.word 0x00 "USB1_EPI10_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0xBA++0x0 line.byte 0x00 "USB1_EPI10_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xBA++0x0 line.byte 0x00 "USB1_MP7_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xBB++0x0 line.byte 0x00 "USB1_MP7_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xBB++0x0 line.byte 0x00 "USB1_EPI10_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0xBC++0x0 line.byte 0x00 "USB1_EPI10_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xBC++0x0 line.byte 0x00 "USB1_MP7_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xBD++0x0 line.byte 0x00 "USB1_EPI10_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0xBE++0x0 line.byte 0x00 "USB1_MP7_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xBF++0x0 line.byte 0x00 "USB1_MP7_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xC0++0x0 line.byte 0x00 "USB1_MP8_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xC0++0x1 line.word 0x00 "USB1_EPI11_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xC2++0x0 line.byte 0x00 "USB1_MP8_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0xC2++0x1 line.word 0x00 "USB1_EPI11_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0xC2++0x1 line.word 0x00 "USB1_EPI11_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.byte 0xC3++0x0 line.byte 0x00 "USB1_MP8_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0xC4++0x1 line.word 0x00 "USB1_EPI11_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.byte 0xC4++0x0 line.byte 0x00 "USB1_MP8_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.word 0xC6++0x1 line.word 0x00 "USB1_EPI11_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0xC6++0x0 line.byte 0x00 "USB1_MP8_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.word 0xC6++0x1 line.word 0x00 "USB1_EPI11_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.byte 0xC7++0x0 line.byte 0x00 "USB1_MP8_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xC8++0x0 line.byte 0x00 "USB1_MP9_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.word 0xC8++0x1 line.word 0x00 "USB1_EPI11_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0xCA++0x0 line.byte 0x00 "USB1_EPI11_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xCA++0x0 line.byte 0x00 "USB1_MP9_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xCB++0x0 line.byte 0x00 "USB1_MP9_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xCB++0x0 line.byte 0x00 "USB1_EPI11_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0xCC++0x0 line.byte 0x00 "USB1_MP9_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xCC++0x0 line.byte 0x00 "USB1_EPI11_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0xCD++0x0 line.byte 0x00 "USB1_EPI11_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0xCE++0x0 line.byte 0x00 "USB1_MP9_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xCF++0x0 line.byte 0x00 "USB1_MP9_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xD0++0x0 line.byte 0x00 "USB1_MP10_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.byte 0xD2++0x0 line.byte 0x00 "USB1_MP10_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xD3++0x0 line.byte 0x00 "USB1_MP10_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xD4++0x0 line.byte 0x00 "USB1_MP10_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xD6++0x0 line.byte 0x00 "USB1_MP10_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xD7++0x0 line.byte 0x00 "USB1_MP10_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xD8++0x0 line.byte 0x00 "USB1_MP11_TXFUNCADDR,USB1 MPn Transmit Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Tx Function Address Value" group.byte 0xDA++0x0 line.byte 0x00 "USB1_MP11_TXHUBADDR,USB1 MPn Transmit Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xDB++0x0 line.byte 0x00 "USB1_MP11_TXHUBPORT,USB1 MPn Transmit Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.byte 0xDC++0x0 line.byte 0x00 "USB1_MP11_RXFUNCADDR,USB1 MPn Receive Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Rx Function Address Value" group.byte 0xDE++0x0 line.byte 0x00 "USB1_MP11_RXHUBADDR,USB1 MPn Receive Hub Address Register" bitfld.byte 0x00 7. " MULTTRANS ,Multiple Transaction Translators" "0,1" hexmask.byte 0x00 0.--6. 1. " ADDR ,Hub Address Value" group.byte 0xDF++0x0 line.byte 0x00 "USB1_MP11_RXHUBPORT,USB1 MPn Receive Hub Port Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Hub Port Value" group.word 0x100++0x1 line.word 0x00 "USB1_EP0_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x102++0x1 line.word 0x00 "USB1_EP0_CSR0_H,USB1 EP0 Configuration and Status (Host) Register" bitfld.word 0x00 11. " DISPING ,Disable Ping" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 7. " NAKTO ,NAK Timeout" "0,1" bitfld.word 0x00 6. " STATUSPKT ,Status Packet" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " TOERR ,Timeout Error" "0,1" newline bitfld.word 0x00 3. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 2. " RXSTALL ,Rx Stall" "0,1" bitfld.word 0x00 1. " TXPKTRDY ,Tx Packet Ready" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x102++0x1 line.word 0x00 "USB1_EP0_CSR0_P,USB1 EP0 Configuration and Status (Peripheral) Register" bitfld.word 0x00 8. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 7. " SSETUPEND ,Service Setup End" "0,1" bitfld.word 0x00 6. " SPKTRDY ,Service Rx Packet Ready" "0,1" bitfld.word 0x00 5. " SENDSTALL ,Send Stall" "0,1" newline bitfld.word 0x00 4. " SETUPEND ,Setup End" "0,1" bitfld.word 0x00 3. " DATAEND ,Data End" "0,1" bitfld.word 0x00 2. " SENTSTALL ,Sent Stall" "0,1" bitfld.word 0x00 1. " TXPKTRDY ,Tx Packet Ready" "0,1" newline bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x102++0x1 line.word 0x00 "USB1_EP0_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x102++0x1 line.word 0x00 "USB1_EP0_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x104++0x1 line.word 0x00 "USB1_EP0_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x106++0x1 line.word 0x00 "USB1_EP0_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x106++0x1 line.word 0x00 "USB1_EP0_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x108++0x1 line.word 0x00 "USB1_EP0_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.word 0x108++0x1 line.word 0x00 "USB1_EP0_CNT0,USB1 EP0 Number of Received Bytes Register" hexmask.word.byte 0x00 0.--6. 1. " RXCNT ,Rx Byte Count Value" group.byte 0x10A++0x0 line.byte 0x00 "USB1_EP0_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x10A++0x0 line.byte 0x00 "USB1_EP0_TYPE0,USB1 EP0 Connection Type Register" bitfld.byte 0x00 0.--1. " SPEED ,Speed of Operation Value" "0,1,2,3" group.byte 0x10B++0x0 line.byte 0x00 "USB1_EP0_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x10B++0x0 line.byte 0x00 "USB1_EP0_NAKLIMIT0,USB1 EP0 NAK Limit Register" bitfld.byte 0x00 0.--4. " VALUE ,Endpoint 0 Timeout Value (in Frames)" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" group.byte 0x10C++0x0 line.byte 0x00 "USB1_EP0_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x10D++0x0 line.byte 0x00 "USB1_EP0_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0x10F++0x0 line.byte 0x00 "USB1_EP0_CFGDATA0,USB1 EP0 Configuration Information Register" bitfld.byte 0x00 7. " MPRX ,Multi-Packet Aggregate for Rx Enable" "0,1" bitfld.byte 0x00 6. " MPTX ,Multi-Packet Split for Tx Enable" "0,1" bitfld.byte 0x00 5. " BIGEND ,Big Endian Data" "0,1" bitfld.byte 0x00 4. " HBRX ,High-Bandwidth Rx Enable" "0,1" newline bitfld.byte 0x00 3. " HBTX ,High-Bandwidth Tx Enable" "0,1" bitfld.byte 0x00 2. " DYNFIFO ,Dynamic FIFO Size Enable" "0,1" bitfld.byte 0x00 1. " SOFTCON ,Soft Connect Enable" "0,1" bitfld.byte 0x00 0. " UTMIWID ,UTMI Data Width" "0,1" group.word 0x110++0x1 line.word 0x00 "USB1_EP1_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x112++0x1 line.word 0x00 "USB1_EP1_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x112++0x1 line.word 0x00 "USB1_EP1_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x114++0x1 line.word 0x00 "USB1_EP1_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x116++0x1 line.word 0x00 "USB1_EP1_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x116++0x1 line.word 0x00 "USB1_EP1_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x118++0x1 line.word 0x00 "USB1_EP1_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x11A++0x0 line.byte 0x00 "USB1_EP1_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x11B++0x0 line.byte 0x00 "USB1_EP1_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x11C++0x0 line.byte 0x00 "USB1_EP1_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x11D++0x0 line.byte 0x00 "USB1_EP1_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x120++0x1 line.word 0x00 "USB1_EP2_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x122++0x1 line.word 0x00 "USB1_EP2_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x122++0x1 line.word 0x00 "USB1_EP2_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x124++0x1 line.word 0x00 "USB1_EP2_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x126++0x1 line.word 0x00 "USB1_EP2_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x126++0x1 line.word 0x00 "USB1_EP2_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x128++0x1 line.word 0x00 "USB1_EP2_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x12A++0x0 line.byte 0x00 "USB1_EP2_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x12B++0x0 line.byte 0x00 "USB1_EP2_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x12C++0x0 line.byte 0x00 "USB1_EP2_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x12D++0x0 line.byte 0x00 "USB1_EP2_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x130++0x1 line.word 0x00 "USB1_EP3_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x132++0x1 line.word 0x00 "USB1_EP3_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x132++0x1 line.word 0x00 "USB1_EP3_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x134++0x1 line.word 0x00 "USB1_EP3_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x136++0x1 line.word 0x00 "USB1_EP3_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x136++0x1 line.word 0x00 "USB1_EP3_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x138++0x1 line.word 0x00 "USB1_EP3_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x13A++0x0 line.byte 0x00 "USB1_EP3_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x13B++0x0 line.byte 0x00 "USB1_EP3_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x13C++0x0 line.byte 0x00 "USB1_EP3_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x13D++0x0 line.byte 0x00 "USB1_EP3_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x140++0x1 line.word 0x00 "USB1_EP4_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x142++0x1 line.word 0x00 "USB1_EP4_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x142++0x1 line.word 0x00 "USB1_EP4_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x144++0x1 line.word 0x00 "USB1_EP4_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x146++0x1 line.word 0x00 "USB1_EP4_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x146++0x1 line.word 0x00 "USB1_EP4_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x148++0x1 line.word 0x00 "USB1_EP4_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x14A++0x0 line.byte 0x00 "USB1_EP4_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x14B++0x0 line.byte 0x00 "USB1_EP4_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x14C++0x0 line.byte 0x00 "USB1_EP4_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x14D++0x0 line.byte 0x00 "USB1_EP4_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x150++0x1 line.word 0x00 "USB1_EP5_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x152++0x1 line.word 0x00 "USB1_EP5_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x152++0x1 line.word 0x00 "USB1_EP5_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x154++0x1 line.word 0x00 "USB1_EP5_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x156++0x1 line.word 0x00 "USB1_EP5_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x156++0x1 line.word 0x00 "USB1_EP5_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x158++0x1 line.word 0x00 "USB1_EP5_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x15A++0x0 line.byte 0x00 "USB1_EP5_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x15B++0x0 line.byte 0x00 "USB1_EP5_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x15C++0x0 line.byte 0x00 "USB1_EP5_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x15D++0x0 line.byte 0x00 "USB1_EP5_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x160++0x1 line.word 0x00 "USB1_EP6_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x162++0x1 line.word 0x00 "USB1_EP6_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x162++0x1 line.word 0x00 "USB1_EP6_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x164++0x1 line.word 0x00 "USB1_EP6_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x166++0x1 line.word 0x00 "USB1_EP6_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x166++0x1 line.word 0x00 "USB1_EP6_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x168++0x1 line.word 0x00 "USB1_EP6_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x16A++0x0 line.byte 0x00 "USB1_EP6_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x16B++0x0 line.byte 0x00 "USB1_EP6_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x16C++0x0 line.byte 0x00 "USB1_EP6_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x16D++0x0 line.byte 0x00 "USB1_EP6_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x170++0x1 line.word 0x00 "USB1_EP7_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x172++0x1 line.word 0x00 "USB1_EP7_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x172++0x1 line.word 0x00 "USB1_EP7_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x174++0x1 line.word 0x00 "USB1_EP7_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x176++0x1 line.word 0x00 "USB1_EP7_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x176++0x1 line.word 0x00 "USB1_EP7_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x178++0x1 line.word 0x00 "USB1_EP7_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x17A++0x0 line.byte 0x00 "USB1_EP7_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x17B++0x0 line.byte 0x00 "USB1_EP7_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x17C++0x0 line.byte 0x00 "USB1_EP7_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x17D++0x0 line.byte 0x00 "USB1_EP7_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x180++0x1 line.word 0x00 "USB1_EP8_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x182++0x1 line.word 0x00 "USB1_EP8_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x182++0x1 line.word 0x00 "USB1_EP8_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x184++0x1 line.word 0x00 "USB1_EP8_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x186++0x1 line.word 0x00 "USB1_EP8_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x186++0x1 line.word 0x00 "USB1_EP8_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x188++0x1 line.word 0x00 "USB1_EP8_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x18A++0x0 line.byte 0x00 "USB1_EP8_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x18B++0x0 line.byte 0x00 "USB1_EP8_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x18C++0x0 line.byte 0x00 "USB1_EP8_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x18D++0x0 line.byte 0x00 "USB1_EP8_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x190++0x1 line.word 0x00 "USB1_EP9_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x192++0x1 line.word 0x00 "USB1_EP9_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x192++0x1 line.word 0x00 "USB1_EP9_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x194++0x1 line.word 0x00 "USB1_EP9_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x196++0x1 line.word 0x00 "USB1_EP9_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x196++0x1 line.word 0x00 "USB1_EP9_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x198++0x1 line.word 0x00 "USB1_EP9_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x19A++0x0 line.byte 0x00 "USB1_EP9_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x19B++0x0 line.byte 0x00 "USB1_EP9_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x19C++0x0 line.byte 0x00 "USB1_EP9_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x19D++0x0 line.byte 0x00 "USB1_EP9_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x1A0++0x1 line.word 0x00 "USB1_EP10_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x1A2++0x1 line.word 0x00 "USB1_EP10_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x1A2++0x1 line.word 0x00 "USB1_EP10_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x1A4++0x1 line.word 0x00 "USB1_EP10_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x1A6++0x1 line.word 0x00 "USB1_EP10_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x1A6++0x1 line.word 0x00 "USB1_EP10_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x1A8++0x1 line.word 0x00 "USB1_EP10_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x1AA++0x0 line.byte 0x00 "USB1_EP10_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1AB++0x0 line.byte 0x00 "USB1_EP10_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x1AC++0x0 line.byte 0x00 "USB1_EP10_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1AD++0x0 line.byte 0x00 "USB1_EP10_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.word 0x1B0++0x1 line.word 0x00 "USB1_EP11_TXMAXP,USB1 EPn Transmit Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-Frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x1B2++0x1 line.word 0x00 "USB1_EP11_TXCSR_H,USB1 EPn Transmit Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" newline bitfld.word 0x00 9. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 8. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 7. " NAKTOINCMP ,NAK Timeout Incomplete" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" newline bitfld.word 0x00 5. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 4. " SETUPPKT ,Setup Packet" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " TXTOERR ,Tx Timeout Error" "0,1" newline bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x1B2++0x1 line.word 0x00 "USB1_EP11_TXCSR_P,USB1 EPn Transmit Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOSET ,TxPkRdy Autoset Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers Enable" "0,1" bitfld.word 0x00 12. " DMAREQEN ,DMA Request Enable Tx EP" "0,1" bitfld.word 0x00 11. " FRCDATATGL ,Force Data Toggle" "0,1" newline bitfld.word 0x00 10. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 7. " INCOMPTX ,Incomplete Tx" "0,1" bitfld.word 0x00 6. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 5. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 4. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 3. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 2. " URUNERR ,Underrun Error" "0,1" bitfld.word 0x00 1. " NEFIFO ,Not Empty FIFO" "0,1" newline bitfld.word 0x00 0. " TXPKTRDY ,Tx Packet Ready" "0,1" group.word 0x1B4++0x1 line.word 0x00 "USB1_EP11_RXMAXP,USB1 EPn Receive Maximum Packet Length Register" bitfld.word 0x00 11.--12. " MULTM1 ,Multi-Packets per Micro-frame" "0,1,2,3" hexmask.word 0x00 0.--10. 1. " MAXPAY ,Maximum Payload" group.word 0x1B6++0x1 line.word 0x00 "USB1_EP11_RXCSR_H,USB1 EPn Receive Configuration and Status (Host) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " AUTOREQ ,Auto Request Clear Enable" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " PIDERR ,Packet ID Error" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 10. " DATGLEN ,Data Toggle Write Enable" "0,1" bitfld.word 0x00 9. " DATGL ,Data Toggle" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" newline bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " RXSTALL ,Rx STALL" "0,1" bitfld.word 0x00 5. " REQPKT ,Request Packet" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" newline bitfld.word 0x00 3. " NAKTODERR ,NAK Timeout Data Error" "0,1" bitfld.word 0x00 2. " RXTOERR ,Rx Timeout Error" "0,1" bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x1B6++0x1 line.word 0x00 "USB1_EP11_RXCSR_P,USB1 EPn Receive Configuration and Status (Peripheral) Register" bitfld.word 0x00 15. " AUTOCLR ,Auto Clear Enable" "0,1" bitfld.word 0x00 14. " ISO ,Isochronous Transfers" "0,1" bitfld.word 0x00 13. " DMAREQEN ,DMA Request Enable Rx EP" "0,1" bitfld.word 0x00 12. " DNYETPERR ,Disable NYET Handshake" "0,1" newline bitfld.word 0x00 11. " DMAREQMODE ,DMA Mode Select" "0,1" bitfld.word 0x00 8. " INCOMPRX ,Incomplete Rx" "0,1" bitfld.word 0x00 7. " CLRDATATGL ,Clear Endpoint Data Toggle" "0,1" bitfld.word 0x00 6. " SENTSTALL ,Sent STALL" "0,1" newline bitfld.word 0x00 5. " SENDSTALL ,Send STALL" "0,1" bitfld.word 0x00 4. " FLUSHFIFO ,Flush Endpoint FIFO" "0,1" bitfld.word 0x00 3. " DATAERR ,Data Error" "0,1" bitfld.word 0x00 2. " ORUNERR ,OUT Run Error" "0,1" newline bitfld.word 0x00 1. " FIFOFULL ,FIFO Full" "0,1" bitfld.word 0x00 0. " RXPKTRDY ,Rx Packet Ready" "0,1" group.word 0x1B8++0x1 line.word 0x00 "USB1_EP11_RXCNT,USB1 EPn Number of Bytes Received Register" hexmask.word 0x00 0.--13. 1. " EPRXCNT ,EP Rx Count" group.byte 0x1BA++0x0 line.byte 0x00 "USB1_EP11_TXTYPE,USB1 EPn Transmit Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1BB++0x0 line.byte 0x00 "USB1_EP11_TXINTERVAL,USB1 EPn Transmit Polling Interval Register" group.byte 0x1BC++0x0 line.byte 0x00 "USB1_EP11_RXTYPE,USB1 EPn Receive Type Register" bitfld.byte 0x00 6.--7. " SPEED ,Speed of Operation Value" "0,1,2,3" bitfld.byte 0x00 4.--5. " PROTOCOL ,Protocol for Transfer" "0,1,2,3" bitfld.byte 0x00 0.--3. " TGTEP ,Target Endpoint Number" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x1BD++0x0 line.byte 0x00 "USB1_EP11_RXINTERVAL,USB1 EPn Receive Polling Interval Register" group.byte 0x200++0x0 line.byte 0x00 "USB1_DMA_IRQ,USB1 DMA Interrupt Register" bitfld.byte 0x00 7. " D7 ,DMA 7 Interrupt Pending Status" "0,1" bitfld.byte 0x00 6. " D6 ,DMA 6 Interrupt Pending Status" "0,1" bitfld.byte 0x00 5. " D5 ,DMA 5 Interrupt Pending Status" "0,1" bitfld.byte 0x00 4. " D4 ,DMA 4 Interrupt Pending Status" "0,1" newline bitfld.byte 0x00 3. " D3 ,DMA 3 Interrupt Pending Status" "0,1" bitfld.byte 0x00 2. " D2 ,DMA 2 Interrupt Pending Status" "0,1" bitfld.byte 0x00 1. " D1 ,DMA 1 Interrupt Pending Status" "0,1" bitfld.byte 0x00 0. " D0 ,DMA 0 Interrupt Pending Status" "0,1" group.word 0x204++0x1 line.word 0x00 "USB1_DMA0_CTL,USB1 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x208++0x3 line.long 0x00 "USB1_DMA0_ADDR,USB1 DMA Channel n Address Register" group.long 0x20C++0x3 line.long 0x00 "USB1_DMA0_CNT,USB1 DMA Channel n Count Register" group.word 0x214++0x1 line.word 0x00 "USB1_DMA1_CTL,USB1 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x218++0x3 line.long 0x00 "USB1_DMA1_ADDR,USB1 DMA Channel n Address Register" group.long 0x21C++0x3 line.long 0x00 "USB1_DMA1_CNT,USB1 DMA Channel n Count Register" group.word 0x224++0x1 line.word 0x00 "USB1_DMA2_CTL,USB1 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x228++0x3 line.long 0x00 "USB1_DMA2_ADDR,USB1 DMA Channel n Address Register" group.long 0x22C++0x3 line.long 0x00 "USB1_DMA2_CNT,USB1 DMA Channel n Count Register" group.word 0x234++0x1 line.word 0x00 "USB1_DMA3_CTL,USB1 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x238++0x3 line.long 0x00 "USB1_DMA3_ADDR,USB1 DMA Channel n Address Register" group.long 0x23C++0x3 line.long 0x00 "USB1_DMA3_CNT,USB1 DMA Channel n Count Register" group.word 0x244++0x1 line.word 0x00 "USB1_DMA4_CTL,USB1 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x248++0x3 line.long 0x00 "USB1_DMA4_ADDR,USB1 DMA Channel n Address Register" group.long 0x24C++0x3 line.long 0x00 "USB1_DMA4_CNT,USB1 DMA Channel n Count Register" group.word 0x254++0x1 line.word 0x00 "USB1_DMA5_CTL,USB1 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x258++0x3 line.long 0x00 "USB1_DMA5_ADDR,USB1 DMA Channel n Address Register" group.long 0x25C++0x3 line.long 0x00 "USB1_DMA5_CNT,USB1 DMA Channel n Count Register" group.word 0x264++0x1 line.word 0x00 "USB1_DMA6_CTL,USB1 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x268++0x3 line.long 0x00 "USB1_DMA6_ADDR,USB1 DMA Channel n Address Register" group.long 0x26C++0x3 line.long 0x00 "USB1_DMA6_CNT,USB1 DMA Channel n Count Register" group.word 0x274++0x1 line.word 0x00 "USB1_DMA7_CTL,USB1 DMA Channel n Control Register" bitfld.word 0x00 9.--10. " BRSTM ,Burst Mode" "0,1,2,3" bitfld.word 0x00 8. " ERR ,Bus Error" "0,1" bitfld.word 0x00 4.--7. " EP ,DMA Channel Endpoint Assignment" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 3. " IE ,DMA Interrupt Enable" "0,1" newline bitfld.word 0x00 2. " MODE ,DMA Mode" "0,1" bitfld.word 0x00 1. " DIR ,DMA Transfer Direction" "0,1" bitfld.word 0x00 0. " EN ,DMA Enable" "0,1" group.long 0x278++0x3 line.long 0x00 "USB1_DMA7_ADDR,USB1 DMA Channel n Address Register" group.long 0x27C++0x3 line.long 0x00 "USB1_DMA7_CNT,USB1 DMA Channel n Count Register" group.word 0x300++0x1 line.word 0x00 "USB1_RQPKTCNT0,USB1 EPn Request Packet Count Register" group.word 0x304++0x1 line.word 0x00 "USB1_RQPKTCNT1,USB1 EPn Request Packet Count Register" group.word 0x308++0x1 line.word 0x00 "USB1_RQPKTCNT2,USB1 EPn Request Packet Count Register" group.word 0x30C++0x1 line.word 0x00 "USB1_RQPKTCNT3,USB1 EPn Request Packet Count Register" group.word 0x310++0x1 line.word 0x00 "USB1_RQPKTCNT4,USB1 EPn Request Packet Count Register" group.word 0x314++0x1 line.word 0x00 "USB1_RQPKTCNT5,USB1 EPn Request Packet Count Register" group.word 0x318++0x1 line.word 0x00 "USB1_RQPKTCNT6,USB1 EPn Request Packet Count Register" group.word 0x31C++0x1 line.word 0x00 "USB1_RQPKTCNT7,USB1 EPn Request Packet Count Register" group.word 0x320++0x1 line.word 0x00 "USB1_RQPKTCNT8,USB1 EPn Request Packet Count Register" group.word 0x324++0x1 line.word 0x00 "USB1_RQPKTCNT9,USB1 EPn Request Packet Count Register" group.word 0x328++0x1 line.word 0x00 "USB1_RQPKTCNT10,USB1 EPn Request Packet Count Register" group.word 0x344++0x1 line.word 0x00 "USB1_CT_UCH,USB1 Chirp Timeout Register" hexmask.word 0x00 0.--14. 1. " VALUE ,Chirp Timeout Value" group.word 0x346++0x1 line.word 0x00 "USB1_CT_HHSRTN,USB1 Host High-Speed Return to Normal Register" hexmask.word 0x00 0.--14. 1. " VALUE ,Host High-Speed Return to Normal Value" group.word 0x348++0x1 line.word 0x00 "USB1_CT_HSBT,USB1 High-Speed Timeout Register" bitfld.word 0x00 0.--3. " VALUE ,HS Timeout Adder" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.word 0x360++0x1 line.word 0x00 "USB1_LPM_ATTR,USB1 LPM Attribute Register" bitfld.word 0x00 12.--15. " EP ,Endpoint" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 8. " RMTWAK ,Remote Wakeup Enable" "0,1" bitfld.word 0x00 4.--7. " HIRD ,Host Initiated Resume Duration" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" bitfld.word 0x00 0.--3. " LINKSTATE ,Link State" "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" group.byte 0x362++0x0 line.byte 0x00 "USB1_LPM_CTL,USB1 LPM Control Register" bitfld.byte 0x00 4. " NAK ,LPM NAK Enable" "0,1" bitfld.byte 0x00 2.--3. " EN ,LPM Enable" "0,1,2,3" bitfld.byte 0x00 1. " RESUME ,LPM Resume (Remote Wakeup)" "0,1" bitfld.byte 0x00 0. " TX ,LPM Transmit" "0,1" group.byte 0x363++0x0 line.byte 0x00 "USB1_LPM_IEN,USB1 LPM Interrupt Enable Register" bitfld.byte 0x00 5. " LPMERR ,LPM Error Interrupt Enable" "0,1" bitfld.byte 0x00 4. " LPMRES ,LPM Resume Interrupt Enable" "0,1" bitfld.byte 0x00 3. " LPMNC ,LPM NYET Control Interrupt Enable" "0,1" bitfld.byte 0x00 2. " LPMACK ,LPM ACK Interrupt Enable" "0,1" newline bitfld.byte 0x00 1. " LPMNY ,LPM NYET Interrupt Enable" "0,1" bitfld.byte 0x00 0. " LPMST ,LPM STALL Interrupt Enable" "0,1" group.byte 0x364++0x0 line.byte 0x00 "USB1_LPM_IRQ,USB1 LPM Interrupt Status Register" bitfld.byte 0x00 5. " LPMERR ,LPM Error Interrupt" "0,1" bitfld.byte 0x00 4. " LPMRES ,LPM Resume Interrupt" "0,1" bitfld.byte 0x00 3. " LPMNC ,LPM NYET Control Interrupt" "0,1" bitfld.byte 0x00 2. " LPMACK ,LPM ACK Interrupt" "0,1" newline bitfld.byte 0x00 1. " LPMNY ,LPM NYET Interrupt" "0,1" bitfld.byte 0x00 0. " LPMST ,LPM STALL Interrupt" "0,1" group.byte 0x365++0x0 line.byte 0x00 "USB1_LPM_FADDR,USB1 LPM Function Address Register" hexmask.byte 0x00 0.--6. 1. " VALUE ,Function Address Value" group.byte 0x380++0x0 line.byte 0x00 "USB1_VBUS_CTL,USB1 VBUS Control Register" bitfld.byte 0x00 4. " DRV ,VBUS Drive" "0,1" bitfld.byte 0x00 3. " DRVINT ,VBUS Drive Interrupt" "0,1" bitfld.byte 0x00 2. " DRVIEN ,VBUS Drive Interrupt Enable" "0,1" bitfld.byte 0x00 1. " DRVOD ,VBUS Drive Open Drain" "0,1" newline bitfld.byte 0x00 0. " INVDRV ,VBUS Invert Drive" "0,1" group.byte 0x381++0x0 line.byte 0x00 "USB1_BAT_CHG,USB1 Battery Charging Control Register" bitfld.byte 0x00 4. " DEDCHG ,Dedicated Charging Port" "0,1" bitfld.byte 0x00 3. " CHGDET ,Charging Port Detected" "0,1" bitfld.byte 0x00 2. " SNSCHGDET ,Sense Charger Detection" "0,1" bitfld.byte 0x00 1. " CONDET ,Connected Detected" "0,1" newline bitfld.byte 0x00 0. " SNSCONDET ,Sense Connection Detection" "0,1" group.byte 0x382++0x0 line.byte 0x00 "USB1_IDCTL,USB1 ID Control" bitfld.byte 0x00 1. " IDVAL ,ID Value" "0,1" bitfld.byte 0x00 0. " IDSEL ,ID Select" "0,1" group.byte 0x394++0x0 line.byte 0x00 "USB1_PHY_CTL,USB1 PHY Control Register" bitfld.byte 0x00 7. " EN ,PHY Enable" "0,1" bitfld.byte 0x00 4. " DIS ,Disable PHY" "0,1" bitfld.byte 0x00 1. " RESTORE ,Restore from Hibernate" "0,1" bitfld.byte 0x00 0. " HIBER ,Hibernate" "0,1" tree.end endif tree.end tree "WDOG (Watchdog Timer)" tree "WDOG0" base ad:0x31008000 width 12. group.long 0x0++0x3 line.long 0x00 "WDOG0_CTL,WDOG0 Control Register" bitfld.long 0x00 15. " WDRO ,Watch Dog Rollover" "0,1" hexmask.long.byte 0x00 4.--11. 1. " WDEN ,Watch Dog Enable" group.long 0x4++0x3 line.long 0x00 "WDOG0_CNT,WDOG0 Count Register" group.long 0x8++0x3 line.long 0x00 "WDOG0_STAT,WDOG0 Watchdog Timer Status Register" tree.end tree "WDOG1" base ad:0x31009000 width 12. group.long 0x0++0x3 line.long 0x00 "WDOG1_CTL,WDOG1 Control Register" bitfld.long 0x00 15. " WDRO ,Watch Dog Rollover" "0,1" hexmask.long.byte 0x00 4.--11. 1. " WDEN ,Watch Dog Enable" group.long 0x4++0x3 line.long 0x00 "WDOG1_CNT,WDOG1 Count Register" group.long 0x8++0x3 line.long 0x00 "WDOG1_STAT,WDOG1 Watchdog Timer Status Register" tree.end tree.end newline