; --------------------------------------------------------------------------------
; @Title: Microsemi SmartFusion2 Starter Kit Flash Programming
; @Description: 
;   Load a simple sieve demo into the FLASH of the Microsemi SmartFusion2.
;   Prerequisites:
;     * JP2 JTAG SEL - Short Pin 1-2 (please see readme.txt)
;     * FPGA Design loaded which clocks the Cortex-M
;     * debugger is connected to P3 connector
; @Author: AME
; @Board: SmartFusion2
; @Chip: M2S*
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: flash-demo.cmm 22664 2024-04-18 09:47:55Z gmehdi $

; Reviewed by GME, 2024-04-18


  RESet
  SYStem.RESet
  SYStem.CPU M2S010
  SYStem.CONFIG CONNECTOR      MIPI20T
  SYStem.CONFIG DEBUGPORTTYPE  SWD
  SYStem.Option ResBreak       OFF
  SYStem.Option WaitReset      1ms
  SYStem.Option DUALPORT       ON
  SYStem.MemAccess DAP
  SYStem.Up

  DO ~~/demo/arm/flash/m2s PREPAREONLY

  ; LOAD Elf/Binary file into flash
  FLASH.ReProgram ALL
  Data.LOAD.Elf ~~~~/sieve_thumb_ii_v7_flash.elf /RelPATH
  FLASH.ReProgram OFF
  
  ; Reload SP & PC from Vector Table either by RESeting the CORE
  SYStem.Up 
  
  ; boot till main
  Go.direct main
  WAIT !STATE.RUN()
  
  Mode.Hll
  List.auto
  
  ENDDO