; --------------------------------------------------------------------------------
; @Title: NAND FLASH Programming Script (Generic)
; @Description:
; NAND FLASH(SAMSUNG, K9F2G08) 
;
; SDRAM            : 0x50000000
; Command Register : 0x70200008   
; Address Register : 0x7020000c 
; Data Register    : 0x70200010
; 
; @Author: jjeong
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Keywords: SAMSUNG K9F2G08 NAND
; --------------------------------------------------------------------------------
; $Id: nand-generic.cmm 10516 2022-02-02 11:39:30Z bschroefel $

LOCAL &arg1
ENTRY &arg1
&arg1=STRing.UPpeR("&arg1")  // for example "PREPAREONLY"


  AREA.RESet
  AREA.view
  
//JTAG connection
  ;SYStem.CPU ARM1176JZF
  ;SYStem.Up

//  Configuration of the NAND Flash Controller and Bus
//  Data.Set <addr> %LE %LONG <data>
  ;Data.Set ASD:0x70200000 %long 0xc5

  Break.RESet

  FLASHFILE.RESet
  
//FLASHFILE.Config <cmd_reg> <addr_reg> <data_reg>
  FLASHFILE.CONFIG 0x70200008 0x7020000c 0x70200010

// FLASHFILE.TARGET <code range> <data range> <Algorithm file>
  FLASHFILE.TARGET 0x50000000++0x1FFF 0x50002000++0x1FFF ~/demo/arm/flash/byte/nand2g08.bin

//Read FLASH Manufacture and Device ID
  FLASHFILE.GETID

//End of the test prepareonly
IF "&arg1"=="PREPAREONLY"
ENDDO


//Open the Dump Windows
  FLASHFILE.DUMP 0x0

//Put a list of bad blocks into area window for 2Gbit (256MB) size
  ;FLASHFILE.GETBADBLOCK 0x0--0xFFFFFFF

  DIALOG.YESNO "Program flash memory?"
  ENTRY &progflash
  IF &progflash 
  (
  //Erase NAND FLASH Main and Bad block inforamtion
    FLASHFILE.Erase 0x0--0xFFFFFFF 

	//Program NAND FLASH
    FLASHFILE.LOAD.binary  * 0x0 
    FLASHFILE.LOAD.binary  * 0x0 /ComPare
  )

ENDDO