; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of Micronas PUC3030A internal flash. 
; 
; @Description:
; Script arguments:
;
;   DO puc3030a  [PREPAREONLY]
;     PREPAREONLY only declares flash but does not execute flash programming
;
; Example:
;
;   DO ~~/demo/arm/flash/puc3030a PREPAREONLY
;
; Flash location:
;  256kB flash at 0x00000000--0x0003ffff (not remapped) or 
;                 0x00080000--0x000bffff (always)
;
; RAM location:
;  48kB SRAM at   0x00100000--0x0010bfff (not remapped) or 
;                 0x00000000--0x0000bfff (remapped)
;
; @Author: WRD
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: PUC3030A
; --------------------------------------------------------------------------------
; $Rev: 10516 $
; $Id: puc3030a.cmm 10516 2022-02-02 11:39:30Z bschroefel $
;

LOCAL &parameters
ENTRY %LINE &parameters

LOCAL &param_prepareonly
&param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
; --------------------------------------------------------------------------------
; Set configuration values out of the CPU table above. If your CPU 
; derivate is not listed please check the data sheet for matching 
; flash configuration.

LOCAL &FlashBase
LOCAL &RamBase

&FlashBase=0x00080000
&RamBase=0x00100000

; --------------------------------------------------------------------------------
; Start debugging
IF SYStem.MODE()<5
(
  SYStem.RESet
  SYStem.CPU ARM7TDMI
  SYStem.Option.EnReset OFF
  SYStem.Up
)

; Check if SRAM is remapped to 0x00000000 by reading MPUREMAP:REMAP bit 
IF (Data.Long(SD:0x1a0000)&0x0002)==0x0002
(
  &RamBase=0x00000000
)

; --------------------------------------------------------------------------------
; Flash declaration

FLASH.RESet
FLASH.Create 1. &FlashBase++0x3ffff 0x800 TARGET Long
FLASH.TARGET &RamBase+0x1000 &RamBase+0x3000 0x1000 ~~/demo/arm/flash/long/puc3030a.bin
FLASH.CLocK 14.31818MHz

; Flash script ends here if called with parameter PREPAREONLY
IF &param_prepareonly
  ENDDO PREPAREDONE

; --------------------------------------------------------------------------------
; Flash programming example

DIALOG.YESNO "Program flash memory?"
LOCAL &progflash
ENTRY &progflash
IF !&progflash 
  ENDDO

; Disable Boot block protection
Data.Set 0xe0008 %Long 0xabcd

; Example for download 

FLASH.Erase.ALL

FLASH.Program.ALL
Data.LOAD.Binary *.bin &FlashBase /Long
FLASH.Program.off

ENDDO