; -------------------------------------------------------------------------------- ; @Title: Example for flash declaration of NXP LPC12xx internal flash. ; ; @Description: ; Script arguments: ; ; DO lpc12xx [PREPAREONLY] [CPU=] ; ; PREPAREONLY only declares flash but does not execute flash programming ; example ; ; CPU= selects CPU derivative ; ; Example: ; ; DO ~~/demo/arm/flash/lpc12xx CPU=LPC1227/301 PREPAREONLY ; ; List of LPC12xx derivatives and their configuration: ; ; CPU-Type Device-ID FlashSize RamSize ; [kB] [kB] ; -------------------------------------------------------------------------------- ; LPC1224/101 0x3640c02b 32. 4. ; LPC1224/121 0x3642c02b 48. 4. ; LPC1225/301 0x3650002b 64. 8. ; LPC1225/321 0x3652002b 80. 8. ; LPC1226/301 0x3660002b 96. 8. ; LPC1227/301 0x3670002b 128. 8. ; LPC12D27/301 0x3670002b 128. 8. ; ; Code Read Protection (CRP): ; ; CRP is invoked by programming a specific pattern in flash location ; at 0x000002FC. ; ; Name Pattern Description ; -------------------------------------------------------------------------------- ; NO_ISP 0x4E697370 Prevents sampling of pin PIO0_12 for entering ISP ; mode. PIO0_12 is available for other uses. ; CRP1 0x12345678 Access to chip via the JTAG pins is disabled. ; This mode allows partial flash update using the ; following ISP commands and restrictions: ; * Write to RAM command cannot access RAM below ; 0x10000300. ; * Copy RAM to flash command can not write to Sector 0. ; * Erase command can erase Sector 0 only when all ; sectors are selected for erase. ; * Compare command is disabled. ; * Read Memory command is disabled. ; This mode is useful when CRP is required and flash ; field updates are needed but all sectors can not ; be erased. ; CRP2 0x87654321 Access to chip via the JTAG pins is disabled. The ; following ISP commands are disabled: ; * Read Memory ; * Write to RAM ; * Go ; * Copy RAM to flash ; * Compare ; When CRP2 is enabled the ISP erase command only allows ; erasure of all user sectors. ; CRP3 0x43218765 Access to chip via the JTAG pins is disabled. ISP ; entry by pulling PIO0_12 LOW is disabled if a valid ; user code is present in flash sector 0. ; This mode effectively disables ISP override using ; PIO0_1 pin. It is up to the user's application to ; provide a flash update mechanism using IAP calls or ; call reinvoke ISP command to enable flash update via ; UART. ; Caution: If CRP3 is selected, no future factory ; testing can be performed on the device. ; ; RAM used by IAP command handler: ; ; Flash programming commands use the top 32 bytes of on-chip RAM. ; The maximum stack usage in the user allocated stack space is 128 ; bytes and it grows downwards. ; ; HINTS: ; ; Flash clock has to match System Clock Frequency (CCLK). ; FLASH.CLocK.AUTO can be used for automatic flash clock measurement. ; ; Boot flash cannot be programmed or erased with builtin flash ; algorithm. ; ; Data has to be loaded to flash alignment to page boundaries. ; ; Vector table checksum generation is done by script, so that it ; can be used or switched off, as needed. ; ; @Author: WRD ; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only ; @Chip: LPC12* ; -------------------------------------------------------------------------------- ; $Rev: 12049 $ ; $Id: lpc12xx.cmm 12049 2023-04-20 12:32:16Z bschroefel $ LOCAL ¶meters ¶m_prepareonly ENTRY %LINE ¶meters ¶m_prepareonly=(STRing.SCAN(STRing.UPpeR("¶meters"),"PREPAREONLY",0)!=-1) LOCAL ¶m_cpu ¶m_cpu=STRing.SCANAndExtract(STRing.UPpeR("¶meters"),"CPU=","") ; ------------------------------------------------------------------------------ ; Start debugging IF SYStem.MODE()<5 ( SYStem.RESet IF "¶m_cpu"!="" SYStem.CPU ¶m_cpu IF !CPUIS(LPC12*) ( IF VERSION.BUILD()>=37389. SYStem.CPU LPC12* ELSE SYStem.CPU LPC1227 ) SYStem.Option EnReset OFF IF CABLE.TWOWIRE() ( SYStem.CONFIG.DEBUGPORTTYPE SWD ) ELSE ( PRINT %ERROR "Serial Wire Debug (SWD) not supported by debug cable" ENDDO ) SYStem.Up ) ; ------------------------------------------------------------------------------ ; Flash declaration FLASH.RESet FLASH.CLocK.AUTO GOSUB FlashDeclaration ; Flash script ends here if called with parameter PREPAREONLY IF ¶m_prepareonly ENDDO PREPAREDONE ; ------------------------------------------------------------------------------ ; Flash programming example DIALOG.YESNO "Program flash memory?" LOCAL &progflash ENTRY &progflash IF &progflash ( ; Switch memory mapping to user flash mode, so that on-chip flash is ; mapped to address 0x0--0x1ff. System Memory Remap register ; SYSMEMREMAP:0..1 = 10b Data.Set 0x40048000 %Long 0x02 ; Example for download FLASH.ReProgram.ALL /Erase ; 1. Download file Data.LOAD.auto * ; 2. Checksum generation Data.SUM 0x0--0x1B /Long ;Calculate checksum of all (other) vectors Data.Set 0x1C %Long -Data.SUM() ;Write the 2's complement in reserved vector's spot ; 3. Flash programming FLASH.ReProgram.off ; Reset device and execute boot code until application start LOCAL &startAddress &startAddress=Data.Long(SD:0x04)&0xFFFFFFFE SYStem.Up Go.direct &startAddress WAIT 100.ms IF STATE.RUN() ( Break.direct Data.List PRINT %ERROR "Boot code didn't branch to application start" ENDDO ) ) ENDDO ; -------------------------------------------------------------------------------- ; Flash declaration depending on selected CPU FlashDeclaration: LOCAL &FlashSize LOCAL &RAMSize IF ((SYStem.CPU()=="LPC1227")||(SYStem.CPU()=="LPC12D27")) ( &FlashSize=0x20000 &RAMSize=0x2000 ) ELSE IF ((SYStem.CPU()=="LPC1226")) ( &FlashSize=0x18000 &RAMSize=0x1000 ) ELSE IF ((SYStem.CPU()=="LPC1225")) ( &FlashSize=0x10000 &RAMSize=0x2000 IF (Data.Long(SD:0x400483F4)&0x00020000)==0x00020000 &FlashSize=0x14000 ) ELSE IF ((SYStem.CPU()=="LPC1224")) ( &FlashSize=0x8000 &RAMSize=0x1000 IF (Data.Long(SD:0x400483F4)&0x00020000)==0x00020000 &FlashSize=0xc000 ) ELSE ( PRINT %ERROR "FLASH size of CPU type is unknown" ENDDO ) IF &FlashSize>=0x8000 ( FLASH.Create 1. 0x000000--0x007FFF 0x1000 TARGET Long ) IF &FlashSize>=0xC000 ( FLASH.Create 1. 0x008000--0x00BFFF 0x1000 TARGET Long ) IF &FlashSize>=0x10000 ( FLASH.Create 1. 0x00C000--0x00FFFF 0x1000 TARGET Long ) IF &FlashSize>=0x14000 ( FLASH.Create 1. 0x010000--0x013FFF 0x1000 TARGET Long ) IF &FlashSize>=0x18000 ( FLASH.Create 1. 0x014000--0x017FFF 0x1000 TARGET Long ) IF &FlashSize>=0x20000 ( FLASH.Create 1. 0x018000--0x01FFFF 0x1000 TARGET Long ) IF &RAMSize>=0x2000 ( FLASH.TARGET 0x10001200 0x10000000 0x1000 ~~/demo/arm/flash/long/lpc1100.bin ) ELSE IF &RAMSize>=0x1000 ( FLASH.TARGET 0x10000A00 0x10000000 0x800 ~~/demo/arm/flash/long/lpc1100.bin ) ELSE ( PRINT %ERROR "RAM size is not supported by the script" ENDDO ) IF (&FlashSize>0x10000)&&(FLASH.TARGET.BUILD(~~/demo/arm/flash/long/lpc1100.bin)<1934.) ( PRINT %ERROR "Please request flash algorithm update to support more than 64 kByte flash" ENDDO ) RETURN