; --------------------------------------------------------------------------------
; @Title: Example for flash declaration for Scaleo easyCAN1 F256K-16 internal flash 
;
; @Description: 
; Script arguments:
;
;  DO easycan1 [PREPAREONLY]
;
;   PREPAREONLY only declares flash but does not execute flash programming example
;
; Memory ranges (reset values):
;
;   256 kByte code flash at 0x00000000--0x0007ffff
;   8 kByte internal RAM at 0x00300000--0x00303fff
;
; @Author: WRD
; @Copyright: (C) 1989-2022 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: EASYCAN1
; --------------------------------------------------------------------------------
; $Rev: 10516 $
; $Id: easycan1.cmm 10516 2022-02-02 11:39:30Z bschroefel $

  LOCAL &parameters &param_prepareonly
  ENTRY %LINE &parameters
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)

  LOCAL &ifcbase &rambase

  ; --------------------------------------------------------------------------------
  ; CPU setup

  IF SYStem.MODE()<5
  (
    SYStem.RESet
    SYStem.CPU EASYCAN1
    SYStem.JtagClock 3Mhz
    SYStem.Up
  )

  ; Disable Watchdog 
  //DATA.SET SD:0xFFE14050 %LE %LONG 0x80000000
  //DATA.SET SD:0xFFE14060 %LE %LONG 0x0000C071
  //DATA.SET SD:0xFFE14068 %LE %LONG 0x00002340

  ; --------------------------------------------------------------------------------
  ; Flash declaration

  FLASH.RESet

  &ifcbase=Data.Long(SD:0xffe04064)&0xff000000
  &rambase=Data.Long(SD:0xffff0000)&0xfff00000

  FLASH.Create 1. (&ifcbase+0x000000)--(&ifcbase+0x03ffff) 0x4000 TARGET Long 0xffe04000

  FLASH.TARGET &rambase+0x400 &rambase+0x1000 0x800 ~~/demo/arm/flash/byte/easycan.bin

  ; --------------------------------------------------------------------------------
  ; Flash programming example

  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash 
  (
    FLASH.ReProgram 1. /Erase
    Data.LOAD.auto *
    FLASH.ReProgram.off
  )

  ENDDO